diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
33 files changed, 1592 insertions, 1079 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 178b313293b..bfc5d9cf716 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -97,10 +97,11 @@ config RT2X00_LIB_CRYPTO config RT2X00_LIB_RFKILL boolean - default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n) + default y if (RT2X00_LIB=y && INPUT=y) || (RT2X00_LIB=m && INPUT!=n) + select INPUT_POLLDEV -comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00" - depends on RT2X00_LIB=y && RFKILL=m +comment "rt2x00 rfkill support disabled due to modularized INPUT and built-in rt2x00" + depends on RT2X00_LIB=y && INPUT=m config RT2X00_LIB_LEDS boolean diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 917cb4f3b03..f22d808d8c5 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -2,6 +2,7 @@ rt2x00lib-y += rt2x00dev.o rt2x00lib-y += rt2x00mac.o rt2x00lib-y += rt2x00config.o rt2x00lib-y += rt2x00queue.o +rt2x00lib-y += rt2x00link.o rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 6a977679124..0f08773328c 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -114,9 +114,6 @@ static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev, { u32 reg; - if (!word) - return; - mutex_lock(&rt2x00dev->csr_mutex); /* @@ -524,6 +521,32 @@ static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, CSR12, reg); } +static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2x00pci_register_read(rt2x00dev, CSR20, ®); + rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, + (libconf->conf->beacon_int - 20) * 16); + rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, + libconf->conf->listen_interval - 1); + + /* We must first disable autowake before it can be enabled */ + rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); + rt2x00pci_register_write(rt2x00dev, CSR20, reg); + + rt2x00_set_field32(®, CSR20_AUTOWAKE, 1); + rt2x00pci_register_write(rt2x00dev, CSR20, reg); + } + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); +} + static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) @@ -537,6 +560,8 @@ static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, rt2400pci_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt2400pci_config_duration(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2400pci_config_ps(rt2x00dev, libconf); } static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, @@ -572,35 +597,37 @@ static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev, qual->false_cca = bbp; } -static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev) +static inline void rt2400pci_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) { - rt2400pci_bbp_write(rt2x00dev, 13, 0x08); - rt2x00dev->link.vgc_level = 0x08; + rt2400pci_bbp_write(rt2x00dev, 13, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; } -static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) +static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) { - u8 reg; + rt2400pci_set_vgc(rt2x00dev, qual, 0x08); +} +static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) +{ /* * The link tuner should not run longer then 60 seconds, * and should run once every 2 seconds. */ - if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1)) + if (count > 60 || !(count & 1)) return; /* * Base r13 link tuning on the false cca count. */ - rt2400pci_bbp_read(rt2x00dev, 13, ®); - - if (rt2x00dev->link.qual.false_cca > 512 && reg < 0x20) { - rt2400pci_bbp_write(rt2x00dev, 13, ++reg); - rt2x00dev->link.vgc_level = reg; - } else if (rt2x00dev->link.qual.false_cca < 100 && reg > 0x08) { - rt2400pci_bbp_write(rt2x00dev, 13, --reg); - rt2x00dev->link.vgc_level = reg; - } + if ((qual->false_cca > 512) && (qual->vgc_level < 0x20)) + rt2400pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level); + else if ((qual->false_cca < 100) && (qual->vgc_level > 0x08)) + rt2400pci_set_vgc(rt2x00dev, qual, --qual->vgc_level); } /* @@ -904,21 +931,10 @@ static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); - - /* - * Disable synchronisation. - */ - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - /* - * Cancel RX and TX. + * Disable power */ - rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); + rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); } static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -1115,6 +1131,20 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } +static void rt2400pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + u32 reg; + + if (qid == QID_BEACON) { + rt2x00pci_register_write(rt2x00dev, CSR14, 0); + } else { + rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_ABORT, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); + } +} + /* * RX control handlers */ @@ -1365,7 +1395,9 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY) + if (value == LED_MODE_TXRX_ACTIVITY || + value == LED_MODE_DEFAULT || + value == LED_MODE_ASUS) rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_ACTIVITY); #endif /* CONFIG_RT2X00_LIB_LEDS */ @@ -1419,7 +1451,9 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = 0; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); @@ -1572,6 +1606,7 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .write_beacon = rt2400pci_write_beacon, .kick_tx_queue = rt2400pci_kick_tx_queue, + .kill_tx_queue = rt2400pci_kill_tx_queue, .fill_rxdone = rt2400pci_fill_rxdone, .config_filter = rt2400pci_config_filter, .config_intf = rt2400pci_config_intf, diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index 9aefda4ab3c..ec3b004ddc3 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -48,8 +48,8 @@ #define EEPROM_SIZE 0x0100 #define BBP_BASE 0x0000 #define BBP_SIZE 0x0020 -#define RF_BASE 0x0000 -#define RF_SIZE 0x0010 +#define RF_BASE 0x0004 +#define RF_SIZE 0x000c /* * Number of TX queues. diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index d3bc218ec85..276a8232aaa 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -114,9 +114,6 @@ static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev, { u32 reg; - if (!word) - return; - mutex_lock(&rt2x00dev->csr_mutex); /* @@ -573,6 +570,32 @@ static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, CSR12, reg); } +static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2x00pci_register_read(rt2x00dev, CSR20, ®); + rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, + (libconf->conf->beacon_int - 20) * 16); + rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, + libconf->conf->listen_interval - 1); + + /* We must first disable autowake before it can be enabled */ + rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); + rt2x00pci_register_write(rt2x00dev, CSR20, reg); + + rt2x00_set_field32(®, CSR20_AUTOWAKE, 1); + rt2x00pci_register_write(rt2x00dev, CSR20, reg); + } + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); +} + static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) @@ -588,6 +611,8 @@ static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, rt2500pci_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt2500pci_config_duration(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2500pci_config_ps(rt2x00dev, libconf); } /* @@ -611,29 +636,33 @@ static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev, qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA); } -static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev) +static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) { - rt2500pci_bbp_write(rt2x00dev, 17, 0x48); - rt2x00dev->link.vgc_level = 0x48; + if (qual->vgc_level_reg != vgc_level) { + rt2500pci_bbp_write(rt2x00dev, 17, vgc_level); + qual->vgc_level_reg = vgc_level; + } } -static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) +static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) { - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u8 r17; + rt2500pci_set_vgc(rt2x00dev, qual, 0x48); +} +static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) +{ /* * To prevent collisions with MAC ASIC on chipsets * up to version C the link tuning should halt after 20 * seconds while being associated. */ if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D && - rt2x00dev->intf_associated && - rt2x00dev->link.count > 20) + rt2x00dev->intf_associated && count > 20) return; - rt2500pci_bbp_read(rt2x00dev, 17, &r17); - /* * Chipset versions C and lower should directly continue * to the dynamic CCA tuning. Chipset version D and higher @@ -649,29 +678,25 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) * then corrupt the R17 tuning. To remidy this the tuning should * be stopped (While making sure the R17 value will not exceed limits) */ - if (rssi < -80 && rt2x00dev->link.count > 20) { - if (r17 >= 0x41) { - r17 = rt2x00dev->link.vgc_level; - rt2500pci_bbp_write(rt2x00dev, 17, r17); - } + if (qual->rssi < -80 && count > 20) { + if (qual->vgc_level_reg >= 0x41) + rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level); return; } /* * Special big-R17 for short distance */ - if (rssi >= -58) { - if (r17 != 0x50) - rt2500pci_bbp_write(rt2x00dev, 17, 0x50); + if (qual->rssi >= -58) { + rt2500pci_set_vgc(rt2x00dev, qual, 0x50); return; } /* * Special mid-R17 for middle distance */ - if (rssi >= -74) { - if (r17 != 0x41) - rt2500pci_bbp_write(rt2x00dev, 17, 0x41); + if (qual->rssi >= -74) { + rt2500pci_set_vgc(rt2x00dev, qual, 0x41); return; } @@ -679,8 +704,8 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) * Leave short or middle distance condition, restore r17 * to the dynamic tuning range. */ - if (r17 >= 0x41) { - rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level); + if (qual->vgc_level_reg >= 0x41) { + rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level); return; } @@ -690,12 +715,12 @@ dynamic_cca_tune: * R17 is inside the dynamic tuning range, * start tuning the link based on the false cca counter. */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < 0x40) { - rt2500pci_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > 0x32) { - rt2500pci_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; + if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) { + rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg); + qual->vgc_level = qual->vgc_level_reg; + } else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) { + rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg); + qual->vgc_level = qual->vgc_level_reg; } } @@ -1065,21 +1090,10 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); - - /* - * Disable synchronisation. - */ - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - /* - * Cancel RX and TX. + * Disable power */ - rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); + rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); } static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -1205,7 +1219,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + (txdesc->rate_mode == RATE_MODE_OFDM)); rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, @@ -1275,6 +1289,20 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } +static void rt2500pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + u32 reg; + + if (qid == QID_BEACON) { + rt2x00pci_register_write(rt2x00dev, CSR14, 0); + } else { + rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); + rt2x00_set_field32(®, TXCSR0_ABORT, 1); + rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); + } +} + /* * RX control handlers */ @@ -1524,7 +1552,9 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY) + if (value == LED_MODE_TXRX_ACTIVITY || + value == LED_MODE_DEFAULT || + value == LED_MODE_ASUS) rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_ACTIVITY); #endif /* CONFIG_RT2X00_LIB_LEDS */ @@ -1721,7 +1751,9 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = 0; @@ -1873,6 +1905,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .write_beacon = rt2500pci_write_beacon, .kick_tx_queue = rt2500pci_kick_tx_queue, + .kill_tx_queue = rt2500pci_kill_tx_queue, .fill_rxdone = rt2500pci_fill_rxdone, .config_filter = rt2500pci_config_filter, .config_intf = rt2500pci_config_intf, diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index e135247f7f8..ce2f065c748 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -59,8 +59,8 @@ #define EEPROM_SIZE 0x0200 #define BBP_BASE 0x0000 #define BBP_SIZE 0x0040 -#define RF_BASE 0x0000 -#define RF_SIZE 0x0014 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 /* * Number of TX queues. diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index af6b5847be5..9e630e70fc9 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -204,9 +204,6 @@ static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev, { u16 reg; - if (!word) - return; - mutex_lock(&rt2x00dev->csr_mutex); /* @@ -280,6 +277,18 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +#ifdef CONFIG_RT2X00_LIB_RFKILL +static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u16 reg; + + rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); + return rt2x00_get_field32(reg, MAC_CSR19_BIT7); +} +#else +#define rt2500usb_rfkill_poll NULL +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + #ifdef CONFIG_RT2X00_LIB_LEDS static void rt2500usb_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) @@ -634,6 +643,32 @@ static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); } +static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u16 reg; + + if (state == STATE_SLEEP) { + rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); + rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, + libconf->conf->beacon_int - 20); + rt2x00_set_field16(®, MAC_CSR18_BEACONS_BEFORE_WAKEUP, + libconf->conf->listen_interval - 1); + + /* We must first disable autowake before it can be enabled */ + rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); + + rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 1); + rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); + } + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); +} + static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) @@ -647,6 +682,8 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, libconf->conf->power_level); if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt2500usb_config_duration(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2500usb_config_ps(rt2x00dev, libconf); } /* @@ -670,7 +707,8 @@ static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev, qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR); } -static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) +static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) { u16 eeprom; u16 value; @@ -691,7 +729,7 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER); rt2500usb_bbp_write(rt2x00dev, 17, value); - rt2x00dev->link.vgc_level = value; + qual->vgc_level = value; } /* @@ -1176,7 +1214,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + (txdesc->rate_mode == RATE_MODE_OFDM)); rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); @@ -1562,12 +1600,22 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY) + if (value == LED_MODE_TXRX_ACTIVITY || + value == LED_MODE_DEFAULT || + value == LED_MODE_ASUS) rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_ACTIVITY); #endif /* CONFIG_RT2X00_LIB_LEDS */ /* + * Detect if this device has an hardware controlled radio. + */ +#ifdef CONFIG_RT2X00_LIB_RFKILL + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + + /* * Check if the BBP tuning should be disabled. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); @@ -1752,7 +1800,9 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; @@ -1839,7 +1889,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); if (!modparam_nohwcrypt) { __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); - __set_bit(CONFIG_CRYPTO_COPY_IV, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags); } __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); @@ -1873,6 +1923,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt2500usb_set_device_state, + .rfkill_poll = rt2500usb_rfkill_poll, .link_stats = rt2500usb_link_stats, .reset_tuner = rt2500usb_reset_tuner, .link_tuner = rt2500usb_link_tuner, @@ -1881,6 +1932,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .write_beacon = rt2500usb_write_beacon, .get_tx_data_len = rt2500usb_get_tx_data_len, .kick_tx_queue = rt2500usb_kick_tx_queue, + .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt2500usb_fill_rxdone, .config_shared_key = rt2500usb_config_key, .config_pairwise_key = rt2500usb_config_key, @@ -1952,6 +2004,8 @@ static struct usb_device_id rt2500usb_device_table[] = { { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* CNet */ + { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Conceptronic */ { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) }, /* D-LINK */ @@ -1976,14 +2030,20 @@ static struct usb_device_id rt2500usb_device_table[] = { { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* Sagem */ + { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Siemens */ { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) }, /* SMC */ { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Spairon */ { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* SURECOM */ + { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Trust */ { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, + /* VTech */ + { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Zinwell */ { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) }, { 0, } diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 4347dfdabcd..5bc46fe7217 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -59,8 +59,8 @@ #define EEPROM_SIZE 0x006a #define BBP_BASE 0x0000 #define BBP_SIZE 0x0060 -#define RF_BASE 0x0000 -#define RF_SIZE 0x0014 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 /* * Number of TX queues. @@ -189,6 +189,14 @@ * MAC_CSR19: GPIO control register. */ #define MAC_CSR19 0x0426 +#define MAC_CSR19_BIT0 FIELD32(0x0001) +#define MAC_CSR19_BIT1 FIELD32(0x0002) +#define MAC_CSR19_BIT2 FIELD32(0x0004) +#define MAC_CSR19_BIT3 FIELD32(0x0008) +#define MAC_CSR19_BIT4 FIELD32(0x0010) +#define MAC_CSR19_BIT5 FIELD32(0x0020) +#define MAC_CSR19_BIT6 FIELD32(0x0040) +#define MAC_CSR19_BIT7 FIELD32(0x0080) /* * MAC_CSR20: LED control register. diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 39ecf3b82ca..84bd6f19acb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -33,6 +33,7 @@ #include <linux/leds.h> #include <linux/mutex.h> #include <linux/etherdevice.h> +#include <linux/input-polldev.h> #include <net/mac80211.h> @@ -44,7 +45,7 @@ /* * Module information. */ -#define DRV_VERSION "2.2.3" +#define DRV_VERSION "2.3.0" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -177,52 +178,41 @@ struct antenna_setup { */ struct link_qual { /* - * Statistics required for Link tuning. - * For the average RSSI value we use the "Walking average" approach. - * When adding RSSI to the average value the following calculation - * is needed: - * - * avg_rssi = ((avg_rssi * 7) + rssi) / 8; - * - * The advantage of this approach is that we only need 1 variable - * to store the average in (No need for a count and a total). - * But more importantly, normal average values will over time - * move less and less towards newly added values this results - * that with link tuning, the device can have a very good RSSI - * for a few minutes but when the device is moved away from the AP - * the average will not decrease fast enough to compensate. - * The walking average compensates this and will move towards - * the new values correctly allowing a effective link tuning. + * Statistics required for Link tuning by driver + * The rssi value is provided by rt2x00lib during the + * link_tuner() callback function. + * The false_cca field is filled during the link_stats() + * callback function and could be used during the + * link_tuner() callback function. */ - int avg_rssi; + int rssi; int false_cca; /* - * Statistics required for Signal quality calculation. - * For calculating the Signal quality we have to determine - * the total number of success and failed RX and TX frames. - * After that we also use the average RSSI value to help - * determining the signal quality. - * For the calculation we will use the following algorithm: - * - * rssi_percentage = (avg_rssi * 100) / rssi_offset - * rx_percentage = (rx_success * 100) / rx_total - * tx_percentage = (tx_success * 100) / tx_total - * avg_signal = ((WEIGHT_RSSI * avg_rssi) + - * (WEIGHT_TX * tx_percentage) + - * (WEIGHT_RX * rx_percentage)) / 100 + * VGC levels + * Hardware driver will tune the VGC level during each call + * to the link_tuner() callback function. This vgc_level is + * is determined based on the link quality statistics like + * average RSSI and the false CCA count. * - * This value should then be checked to not be greated then 100. + * In some cases the drivers need to differentiate between + * the currently "desired" VGC level and the level configured + * in the hardware. The latter is important to reduce the + * number of BBP register reads to reduce register access + * overhead. For this reason we store both values here. + */ + u8 vgc_level; + u8 vgc_level_reg; + + /* + * Statistics required for Signal quality calculation. + * These fields might be changed during the link_stats() + * callback function. */ - int rx_percentage; int rx_success; int rx_failed; - int tx_percentage; int tx_success; int tx_failed; -#define WEIGHT_RSSI 20 -#define WEIGHT_RX 40 -#define WEIGHT_TX 40 }; /* @@ -286,9 +276,16 @@ struct link { struct link_ant ant; /* - * Active VGC level + * Currently active average RSSI value */ - int vgc_level; + int avg_rssi; + + /* + * Currently precalculated percentages of successful + * TX and RX frames. + */ + int rx_percentage; + int tx_percentage; /* * Work structure for scheduling periodic link tuning. @@ -297,55 +294,6 @@ struct link { }; /* - * Small helper macro to work with moving/walking averages. - */ -#define MOVING_AVERAGE(__avg, __val, __samples) \ - ( (((__avg) * ((__samples) - 1)) + (__val)) / (__samples) ) - -/* - * When we lack RSSI information return something less then -80 to - * tell the driver to tune the device to maximum sensitivity. - */ -#define DEFAULT_RSSI ( -128 ) - -/* - * Link quality access functions. - */ -static inline int rt2x00_get_link_rssi(struct link *link) -{ - if (link->qual.avg_rssi && link->qual.rx_success) - return link->qual.avg_rssi; - return DEFAULT_RSSI; -} - -static inline int rt2x00_get_link_ant_rssi(struct link *link) -{ - if (link->ant.rssi_ant && link->qual.rx_success) - return link->ant.rssi_ant; - return DEFAULT_RSSI; -} - -static inline void rt2x00_reset_link_ant_rssi(struct link *link) -{ - link->ant.rssi_ant = 0; -} - -static inline int rt2x00_get_link_ant_rssi_history(struct link *link, - enum antenna ant) -{ - if (link->ant.rssi_history[ant - ANTENNA_A]) - return link->ant.rssi_history[ant - ANTENNA_A]; - return DEFAULT_RSSI; -} - -static inline int rt2x00_update_ant_rssi(struct link *link, int rssi) -{ - int old_rssi = link->ant.rssi_history[link->ant.active.rx - ANTENNA_A]; - link->ant.rssi_history[link->ant.active.rx - ANTENNA_A] = rssi; - return old_rssi; -} - -/* * Interface structure * Per interface configuration details, this structure * is allocated as the private data for ieee80211_vif. @@ -448,7 +396,7 @@ struct rt2x00lib_erp { int ack_timeout; int ack_consume_time; - u64 basic_rates; + u32 basic_rates; int slot_time; @@ -520,9 +468,10 @@ struct rt2x00lib_ops { */ int (*probe_hw) (struct rt2x00_dev *rt2x00dev); char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev); - u16 (*get_firmware_crc) (const void *data, const size_t len); - int (*load_firmware) (struct rt2x00_dev *rt2x00dev, const void *data, - const size_t len); + int (*check_firmware) (struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len); + int (*load_firmware) (struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len); /* * Device initialization/deinitialization handlers. @@ -544,8 +493,10 @@ struct rt2x00lib_ops { int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev); void (*link_stats) (struct rt2x00_dev *rt2x00dev, struct link_qual *qual); - void (*reset_tuner) (struct rt2x00_dev *rt2x00dev); - void (*link_tuner) (struct rt2x00_dev *rt2x00dev); + void (*reset_tuner) (struct rt2x00_dev *rt2x00dev, + struct link_qual *qual); + void (*link_tuner) (struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count); /* * TX control handlers @@ -558,6 +509,8 @@ struct rt2x00lib_ops { int (*get_tx_data_len) (struct queue_entry *entry); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, const enum data_queue_qid queue); + void (*kill_tx_queue) (struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid queue); /* * RX control handlers @@ -625,7 +578,6 @@ enum rt2x00_flags { DEVICE_STATE_REGISTERED_HW, DEVICE_STATE_INITIALIZED, DEVICE_STATE_STARTED, - DEVICE_STATE_STARTED_SUSPEND, DEVICE_STATE_ENABLED_RADIO, DEVICE_STATE_DISABLED_RADIO_HW, @@ -637,6 +589,7 @@ enum rt2x00_flags { DRIVER_REQUIRE_ATIM_QUEUE, DRIVER_REQUIRE_SCHEDULED, DRIVER_REQUIRE_DMA, + DRIVER_REQUIRE_COPY_IV, /* * Driver features @@ -653,7 +606,6 @@ enum rt2x00_flags { CONFIG_EXTERNAL_LNA_BG, CONFIG_DOUBLE_ANTENNA, CONFIG_DISABLE_LINK_TUNING, - CONFIG_CRYPTO_COPY_IV, }; /* @@ -689,8 +641,8 @@ struct rt2x00_dev { unsigned long rfkill_state; #define RFKILL_STATE_ALLOCATED 1 #define RFKILL_STATE_REGISTERED 2 - struct rfkill *rfkill; - struct delayed_work rfkill_work; +#define RFKILL_STATE_BLOCKED 3 + struct input_polled_dev *rfkill_poll_dev; #endif /* CONFIG_RT2X00_LIB_RFKILL */ /* @@ -918,7 +870,7 @@ static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip) return (chipset->rf == chip); } -static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset) +static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset) { return chipset->rev; } @@ -982,7 +934,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, int mc_count, struct dev_addr_list *mc_list); #ifdef CONFIG_RT2X00_LIB_CRYPTO int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key); #else #define rt2x00mac_set_key NULL diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index e66fb316cd6..9c2f5517af2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -32,7 +32,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, enum nl80211_iftype type, - u8 *mac, u8 *bssid) + const u8 *mac, const u8 *bssid) { struct rt2x00intf_conf conf; unsigned int flags = 0; @@ -42,6 +42,8 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, switch (type) { case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_WDS: conf.sync = TSF_SYNC_BEACON; break; case NL80211_IFTYPE_STATION: @@ -152,8 +154,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, */ rt2x00dev->ops->lib->config_ant(rt2x00dev, ant); - rt2x00lib_reset_link_tuner(rt2x00dev); - rt2x00_reset_link_ant_rssi(&rt2x00dev->link); + rt2x00link_reset_tuner(rt2x00dev, true); memcpy(active, ant, sizeof(*ant)); @@ -191,7 +192,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, * which means we need to reset the link tuner. */ if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2x00lib_reset_link_tuner(rt2x00dev); + rt2x00link_reset_tuner(rt2x00dev, false); rt2x00dev->curr_band = conf->channel->band; rt2x00dev->tx_power = conf->power_level; diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index aee9cba13eb..0b41845d954 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -49,9 +49,14 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || + !hw_key || entry->skb->do_not_encrypt) + return; + __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); @@ -69,11 +74,17 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); } -unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_key_conf *key = tx_info->control.hw_key; unsigned int overhead = 0; + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || + !key || skb->do_not_encrypt) + return overhead; + /* * Extend frame length to include IV/EIV/ICV/MMIC, * note that these lengths should only be added when diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 54dd10060bf..07d378ef0b4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -130,9 +130,11 @@ struct rt2x00debug_intf { }; void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, - enum cipher cipher, enum rx_crypto status) + struct rxdone_entry_desc *rxdesc) { struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; + enum cipher cipher = rxdesc->cipher; + enum rx_crypto status = rxdesc->cipher_status; if (cipher == CIPHER_TKIP_NO_MIC) cipher = CIPHER_TKIP; @@ -433,11 +435,12 @@ static ssize_t rt2x00debug_read_##__name(struct file *file, \ if (index >= debug->__name.word_count) \ return -EINVAL; \ \ + index += (debug->__name.word_base / \ + debug->__name.word_size); \ + \ if (debug->__name.flags & RT2X00DEBUGFS_OFFSET) \ index *= debug->__name.word_size; \ \ - index += debug->__name.word_base; \ - \ debug->__name.read(intf->rt2x00dev, index, &value); \ \ size = sprintf(line, __format, value); \ @@ -474,11 +477,12 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \ size = strlen(line); \ value = simple_strtoul(line, NULL, 0); \ \ + index += (debug->__name.word_base / \ + debug->__name.word_size); \ + \ if (debug->__name.flags & RT2X00DEBUGFS_OFFSET) \ index *= debug->__name.word_size; \ \ - index += debug->__name.word_base; \ - \ debug->__name.write(intf->rt2x00dev, index, value); \ \ *offset += size; \ @@ -543,9 +547,9 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name, return NULL; blob->data = data; - data += sprintf(data, "driver: %s\n", intf->rt2x00dev->ops->name); - data += sprintf(data, "version: %s\n", DRV_VERSION); - data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__); + data += sprintf(data, "driver:\t%s\n", intf->rt2x00dev->ops->name); + data += sprintf(data, "version:\t%s\n", DRV_VERSION); + data += sprintf(data, "compiled:\t%s %s\n", __DATE__, __TIME__); blob->size = strlen(blob->data); return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); @@ -566,14 +570,27 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name, return NULL; blob->data = data; - data += sprintf(data, "rt chip: %04x\n", intf->rt2x00dev->chip.rt); - data += sprintf(data, "rf chip: %04x\n", intf->rt2x00dev->chip.rf); - data += sprintf(data, "revision:%08x\n", intf->rt2x00dev->chip.rev); + data += sprintf(data, "rt chip:\t%04x\n", intf->rt2x00dev->chip.rt); + data += sprintf(data, "rf chip:\t%04x\n", intf->rt2x00dev->chip.rf); + data += sprintf(data, "revision:\t%08x\n", intf->rt2x00dev->chip.rev); data += sprintf(data, "\n"); - data += sprintf(data, "csr length: %d\n", debug->csr.word_count); - data += sprintf(data, "eeprom length: %d\n", debug->eeprom.word_count); - data += sprintf(data, "bbp length: %d\n", debug->bbp.word_count); - data += sprintf(data, "rf length: %d\n", debug->rf.word_count); + data += sprintf(data, "register\tbase\twords\twordsize\n"); + data += sprintf(data, "csr\t%d\t%d\t%d\n", + debug->csr.word_base, + debug->csr.word_count, + debug->csr.word_size); + data += sprintf(data, "eeprom\t%d\t%d\t%d\n", + debug->eeprom.word_base, + debug->eeprom.word_count, + debug->eeprom.word_size); + data += sprintf(data, "bbp\t%d\t%d\t%d\n", + debug->bbp.word_base, + debug->bbp.word_count, + debug->bbp.word_size); + data += sprintf(data, "rf\t%d\t%d\t%d\n", + debug->rf.word_base, + debug->rf.word_count, + debug->rf.word_size); blob->size = strlen(blob->data); return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h index a92104dfee9..035cbc98c59 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.h +++ b/drivers/net/wireless/rt2x00/rt2x00debug.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 87c0f2c8307..05f94e21b42 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -30,60 +30,6 @@ #include "rt2x00lib.h" /* - * Link tuning handlers - */ -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* - * Reset link information. - * Both the currently active vgc level as well as - * the link tuner counter should be reset. Resetting - * the counter is important for devices where the - * device should only perform link tuning during the - * first minute after being enabled. - */ - rt2x00dev->link.count = 0; - rt2x00dev->link.vgc_level = 0; - - /* - * Reset the link tuner. - */ - rt2x00dev->ops->lib->reset_tuner(rt2x00dev); -} - -static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - /* - * Clear all (possibly) pre-existing quality statistics. - */ - memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual)); - - /* - * The RX and TX percentage should start at 50% - * this will assure we will get at least get some - * decent value when the link tuner starts. - * The value will be dropped and overwritten with - * the correct (measured )value anyway during the - * first run of the link tuner. - */ - rt2x00dev->link.qual.rx_percentage = 50; - rt2x00dev->link.qual.tx_percentage = 50; - - rt2x00lib_reset_link_tuner(rt2x00dev); - - queue_delayed_work(rt2x00dev->hw->workqueue, - &rt2x00dev->link.work, LINK_TUNE_INTERVAL); -} - -static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - cancel_delayed_work_sync(&rt2x00dev->link.work); -} - -/* * Radio control handlers. */ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) @@ -137,9 +83,10 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) return; /* - * Stop the TX queues. + * Stop the TX queues in mac80211. */ ieee80211_stop_queues(rt2x00dev->hw); + rt2x00queue_stop_queues(rt2x00dev); /* * Disable RX. @@ -161,238 +108,15 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) * When we are disabling the RX, we should also stop the link tuner. */ if (state == STATE_RADIO_RX_OFF) - rt2x00lib_stop_link_tuner(rt2x00dev); + rt2x00link_stop_tuner(rt2x00dev); rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); /* * When we are enabling the RX, we should also start the link tuner. */ - if (state == STATE_RADIO_RX_ON && - (rt2x00dev->intf_ap_count || rt2x00dev->intf_sta_count)) - rt2x00lib_start_link_tuner(rt2x00dev); -} - -static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) -{ - struct antenna_setup ant; - int sample_a = - rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_A); - int sample_b = - rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_B); - - memcpy(&ant, &rt2x00dev->link.ant.active, sizeof(ant)); - - /* - * We are done sampling. Now we should evaluate the results. - */ - rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE; - - /* - * During the last period we have sampled the RSSI - * from both antenna's. It now is time to determine - * which antenna demonstrated the best performance. - * When we are already on the antenna with the best - * performance, then there really is nothing for us - * left to do. - */ - if (sample_a == sample_b) - return; - - if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) - ant.rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - - if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) - ant.tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - - rt2x00lib_config_antenna(rt2x00dev, &ant); -} - -static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) -{ - struct antenna_setup ant; - int rssi_curr = rt2x00_get_link_ant_rssi(&rt2x00dev->link); - int rssi_old = rt2x00_update_ant_rssi(&rt2x00dev->link, rssi_curr); - - memcpy(&ant, &rt2x00dev->link.ant.active, sizeof(ant)); - - /* - * Legacy driver indicates that we should swap antenna's - * when the difference in RSSI is greater that 5. This - * also should be done when the RSSI was actually better - * then the previous sample. - * When the difference exceeds the threshold we should - * sample the rssi from the other antenna to make a valid - * comparison between the 2 antennas. - */ - if (abs(rssi_curr - rssi_old) < 5) - return; - - rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; - - if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) - ant.rx = (ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - - if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) - ant.tx = (ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - - rt2x00lib_config_antenna(rt2x00dev, &ant); -} - -static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) -{ - /* - * Determine if software diversity is enabled for - * either the TX or RX antenna (or both). - * Always perform this check since within the link - * tuner interval the configuration might have changed. - */ - rt2x00dev->link.ant.flags &= ~ANTENNA_RX_DIVERSITY; - rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY; - - if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) - rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY; - if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) - rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY; - - if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && - !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) { - rt2x00dev->link.ant.flags = 0; - return; - } - - /* - * If we have only sampled the data over the last period - * we should now harvest the data. Otherwise just evaluate - * the data. The latter should only be performed once - * every 2 seconds. - */ - if (rt2x00dev->link.ant.flags & ANTENNA_MODE_SAMPLE) - rt2x00lib_evaluate_antenna_sample(rt2x00dev); - else if (rt2x00dev->link.count & 1) - rt2x00lib_evaluate_antenna_eval(rt2x00dev); -} - -static void rt2x00lib_update_link_stats(struct link *link, int rssi) -{ - int avg_rssi = rssi; - - /* - * Update global RSSI - */ - if (link->qual.avg_rssi) - avg_rssi = MOVING_AVERAGE(link->qual.avg_rssi, rssi, 8); - link->qual.avg_rssi = avg_rssi; - - /* - * Update antenna RSSI - */ - if (link->ant.rssi_ant) - rssi = MOVING_AVERAGE(link->ant.rssi_ant, rssi, 8); - link->ant.rssi_ant = rssi; -} - -static void rt2x00lib_precalculate_link_signal(struct link_qual *qual) -{ - if (qual->rx_failed || qual->rx_success) - qual->rx_percentage = - (qual->rx_success * 100) / - (qual->rx_failed + qual->rx_success); - else - qual->rx_percentage = 50; - - if (qual->tx_failed || qual->tx_success) - qual->tx_percentage = - (qual->tx_success * 100) / - (qual->tx_failed + qual->tx_success); - else - qual->tx_percentage = 50; - - qual->rx_success = 0; - qual->rx_failed = 0; - qual->tx_success = 0; - qual->tx_failed = 0; -} - -static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev, - int rssi) -{ - int rssi_percentage = 0; - int signal; - - /* - * We need a positive value for the RSSI. - */ - if (rssi < 0) - rssi += rt2x00dev->rssi_offset; - - /* - * Calculate the different percentages, - * which will be used for the signal. - */ - if (rt2x00dev->rssi_offset) - rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset; - - /* - * Add the individual percentages and use the WEIGHT - * defines to calculate the current link signal. - */ - signal = ((WEIGHT_RSSI * rssi_percentage) + - (WEIGHT_TX * rt2x00dev->link.qual.tx_percentage) + - (WEIGHT_RX * rt2x00dev->link.qual.rx_percentage)) / 100; - - return (signal > 100) ? 100 : signal; -} - -static void rt2x00lib_link_tuner(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, link.work.work); - - /* - * When the radio is shutting down we should - * immediately cease all link tuning. - */ - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* - * Update statistics. - */ - rt2x00dev->ops->lib->link_stats(rt2x00dev, &rt2x00dev->link.qual); - rt2x00dev->low_level_stats.dot11FCSErrorCount += - rt2x00dev->link.qual.rx_failed; - - /* - * Only perform the link tuning when Link tuning - * has been enabled (This could have been disabled from the EEPROM). - */ - if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) - rt2x00dev->ops->lib->link_tuner(rt2x00dev); - - /* - * Precalculate a portion of the link signal which is - * in based on the tx/rx success/failure counters. - */ - rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual); - - /* - * Send a signal to the led to update the led signal strength. - */ - rt2x00leds_led_quality(rt2x00dev, rt2x00dev->link.qual.avg_rssi); - - /* - * Evaluate antenna setup, make this the last step since this could - * possibly reset some statistics. - */ - rt2x00lib_evaluate_antenna(rt2x00dev); - - /* - * Increase tuner counter, and reschedule the next link tuner run. - */ - rt2x00dev->link.count++; - queue_delayed_work(rt2x00dev->hw->workqueue, - &rt2x00dev->link.work, LINK_TUNE_INTERVAL); + if (state == STATE_RADIO_RX_ON) + rt2x00link_start_tuner(rt2x00dev); } static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) @@ -434,7 +158,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, return; if (delayed_flags & DELAYED_UPDATE_BEACON) - rt2x00queue_update_beacon(rt2x00dev, vif); + rt2x00queue_update_beacon(rt2x00dev, vif, true); if (delayed_flags & DELAYED_CONFIG_ERP) rt2x00lib_config_erp(rt2x00dev, intf, &conf); @@ -467,7 +191,9 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac, struct rt2x00_intf *intf = vif_to_intf(vif); if (vif->type != NL80211_IFTYPE_AP && - vif->type != NL80211_IFTYPE_ADHOC) + vif->type != NL80211_IFTYPE_ADHOC && + vif->type != NL80211_IFTYPE_MESH_POINT && + vif->type != NL80211_IFTYPE_WDS) return; /* @@ -490,7 +216,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) rt2x00lib_beacondone_iter, rt2x00dev); - schedule_work(&rt2x00dev->intf_work); + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); } EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); @@ -597,7 +323,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; struct ieee80211_supported_band *sband; - struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; unsigned int header_length; unsigned int align; @@ -668,30 +393,22 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, if (idx < 0) { WARNING(rt2x00dev, "Frame received with unrecognized signal," - "signal=0x%.2x, plcp=%d.\n", rxdesc.signal, - !!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP)); + "signal=0x%.2x, type=%d.\n", rxdesc.signal, + (rxdesc.dev_flags & RXDONE_SIGNAL_MASK)); idx = 0; } /* - * Only update link status if this is a beacon frame carrying our bssid. + * Update extra components */ - hdr = (struct ieee80211_hdr *)entry->skb->data; - if (ieee80211_is_beacon(hdr->frame_control) && - (rxdesc.dev_flags & RXDONE_MY_BSS)) - rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); - - rt2x00debug_update_crypto(rt2x00dev, - rxdesc.cipher, - rxdesc.cipher_status); - - rt2x00dev->link.qual.rx_success++; + rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc); + rt2x00debug_update_crypto(rt2x00dev, &rxdesc); rx_status->mactime = rxdesc.timestamp; rx_status->rate_idx = idx; - rx_status->qual = - rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi); + rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi); rx_status->signal = rxdesc.rssi; + rx_status->noise = rxdesc.noise; rx_status->flag = rxdesc.flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; @@ -1067,7 +784,9 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) if (rt2x00dev->ops->bcn->entry_num > 0) rt2x00dev->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_AP); + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_WDS); /* * Let the driver probe the device to detect the capabilities. @@ -1083,7 +802,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) */ INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); - INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); /* * Allocate queue array. @@ -1104,6 +822,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Register extra components. */ + rt2x00link_register(rt2x00dev); rt2x00leds_register(rt2x00dev); rt2x00rfkill_allocate(rt2x00dev); rt2x00debug_register(rt2x00dev); @@ -1163,23 +882,17 @@ EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); #ifdef CONFIG_PM int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) { - int retval; - NOTICE(rt2x00dev, "Going to sleep.\n"); /* - * Only continue if mac80211 has open interfaces. + * Prevent mac80211 from accessing driver while suspended. */ - if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || - !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) - goto exit; - - set_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags); + if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; /* - * Disable radio. + * Cleanup as much as possible. */ - rt2x00lib_stop(rt2x00dev); rt2x00lib_uninitialize(rt2x00dev); /* @@ -1188,7 +901,6 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) rt2x00leds_suspend(rt2x00dev); rt2x00debug_deregister(rt2x00dev); -exit: /* * Set device mode to sleep for power management, * on some hardware this call seems to consistently fail. @@ -1200,8 +912,7 @@ exit: * the radio and the other components already disabled the * device is as good as disabled. */ - retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP); - if (retval) + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP)) WARNING(rt2x00dev, "Device failed to enter sleep state, " "continue suspending.\n"); @@ -1209,32 +920,8 @@ exit: } EXPORT_SYMBOL_GPL(rt2x00lib_suspend); -static void rt2x00lib_resume_intf(void *data, u8 *mac, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = data; - struct rt2x00_intf *intf = vif_to_intf(vif); - - spin_lock(&intf->lock); - - rt2x00lib_config_intf(rt2x00dev, intf, - vif->type, intf->mac, intf->bssid); - - - /* - * Master or Ad-hoc mode require a new beacon update. - */ - if (vif->type == NL80211_IFTYPE_AP || - vif->type == NL80211_IFTYPE_ADHOC) - intf->delayed_flags |= DELAYED_UPDATE_BEACON; - - spin_unlock(&intf->lock); -} - int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) { - int retval; - NOTICE(rt2x00dev, "Waking up.\n"); /* @@ -1244,60 +931,11 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) rt2x00leds_resume(rt2x00dev); /* - * Only continue if mac80211 had open interfaces. - */ - if (!test_and_clear_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags)) - return 0; - - /* - * Reinitialize device and all active interfaces. - */ - retval = rt2x00lib_start(rt2x00dev); - if (retval) - goto exit; - - /* - * Reconfigure device. - */ - retval = rt2x00mac_config(rt2x00dev->hw, ~0); - if (retval) - goto exit; - - /* - * Iterator over each active interface to - * reconfigure the hardware. - */ - ieee80211_iterate_active_interfaces(rt2x00dev->hw, - rt2x00lib_resume_intf, rt2x00dev); - - /* * We are ready again to receive requests from mac80211. */ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - /* - * It is possible that during that mac80211 has attempted - * to send frames while we were suspending or resuming. - * In that case we have disabled the TX queue and should - * now enable it again - */ - ieee80211_wake_queues(rt2x00dev->hw); - - /* - * During interface iteration we might have changed the - * delayed_flags, time to handles the event by calling - * the work handler directly. - */ - rt2x00lib_intf_scheduled(&rt2x00dev->intf_work); - return 0; - -exit: - rt2x00lib_stop(rt2x00dev); - rt2x00lib_uninitialize(rt2x00dev); - rt2x00debug_deregister(rt2x00dev); - - return retval; } EXPORT_SYMBOL_GPL(rt2x00lib_resume); #endif /* CONFIG_PM */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h index 7169c222a48..fdedb512292 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ b/drivers/net/wireless/rt2x00/rt2x00dump.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index bab05a56e7a..d2deea2f267 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -35,7 +35,6 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) const struct firmware *fw; char *fw_name; int retval; - u16 crc; /* * Read correct firmware from harddisk. @@ -61,16 +60,26 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) return -ENOENT; } - crc = rt2x00dev->ops->lib->get_firmware_crc(fw->data, fw->size); - if (crc != (fw->data[fw->size - 2] << 8 | fw->data[fw->size - 1])) { - ERROR(rt2x00dev, "Firmware checksum error.\n"); - retval = -ENOENT; - goto exit; - } - INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n", fw->data[fw->size - 4], fw->data[fw->size - 3]); + retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size); + switch (retval) { + case FW_OK: + break; + case FW_BAD_CRC: + ERROR(rt2x00dev, "Firmware checksum error.\n"); + goto exit; + case FW_BAD_LENGTH: + ERROR(rt2x00dev, + "Invalid firmware file length (len=%zu)\n", fw->size); + goto exit; + case FW_BAD_VERSION: + ERROR(rt2x00dev, + "Current firmware does not support detected chipset.\n"); + goto exit; + }; + rt2x00dev->fw = fw; return 0; @@ -78,7 +87,7 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) exit: release_firmware(fw); - return retval; + return -ENOENT; } int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index a0cd35b6beb..49671fed91d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -134,7 +134,7 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) rt2x00dev->ops->name, wiphy_name(rt2x00dev->hw->wiphy)); if (rt2x00dev->led_radio.flags & LED_INITIALIZED) { - snprintf(name, sizeof(name), "%s:radio", dev_name); + snprintf(name, sizeof(name), "%s::radio", dev_name); retval = rt2x00leds_register_led(rt2x00dev, &rt2x00dev->led_radio, @@ -144,7 +144,7 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) } if (rt2x00dev->led_assoc.flags & LED_INITIALIZED) { - snprintf(name, sizeof(name), "%s:assoc", dev_name); + snprintf(name, sizeof(name), "%s::assoc", dev_name); retval = rt2x00leds_register_led(rt2x00dev, &rt2x00dev->led_assoc, @@ -154,7 +154,7 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) } if (rt2x00dev->led_qual.flags & LED_INITIALIZED) { - snprintf(name, sizeof(name), "%s:quality", dev_name); + snprintf(name, sizeof(name), "%s::quality", dev_name); retval = rt2x00leds_register_led(rt2x00dev, &rt2x00dev->led_qual, diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h index 9df4a49bdca..1046977e6a1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.h +++ b/drivers/net/wireless/rt2x00/rt2x00leds.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 86cd26fbf76..a631613177d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -33,7 +33,7 @@ * Both the link tuner as the rfkill will be called once per second. */ #define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) ) -#define RFKILL_POLL_INTERVAL ( round_jiffies_relative(HZ) ) +#define RFKILL_POLL_INTERVAL ( 1000 ) /* * rt2x00_rate: Per rate device information @@ -63,7 +63,6 @@ static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value) int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev); void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev); void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state); -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev); /* * Initialization handlers. @@ -77,7 +76,7 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev); void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, enum nl80211_iftype type, - u8 *mac, u8 *bssid); + const u8 *mac, const u8 *bssid); void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, struct ieee80211_bss_conf *conf); @@ -124,9 +123,11 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb); * rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware * @rt2x00dev: Pointer to &struct rt2x00_dev. * @vif: Interface for which the beacon should be updated. + * @enable_beacon: Enable beaconing */ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif); + struct ieee80211_vif *vif, + const bool enable_beacon); /** * rt2x00queue_index_inc - Index incrementation function @@ -140,6 +141,15 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); /** + * rt2x00queue_stop_queues - Halt all data queues + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * + * This function will loop through all available queues to stop + * any pending outgoing frames. + */ +void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev); + +/** * rt2x00queue_init_queues - Initialize all data queues * @rt2x00dev: Pointer to &struct rt2x00_dev. * @@ -154,6 +164,81 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev); int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev); void rt2x00queue_free(struct rt2x00_dev *rt2x00dev); +/** + * rt2x00link_update_stats - Update link statistics from RX frame + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: Received frame + * @rxdesc: Received frame descriptor + * + * Update link statistics based on the information from the + * received frame descriptor. + */ +void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct rxdone_entry_desc *rxdesc); + +/** + * rt2x00link_calculate_signal - Calculate signal quality + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @rssi: RX Frame RSSI + * + * Calculate the signal quality of a frame based on the rssi + * measured during the receiving of the frame and the global + * link quality statistics measured since the start of the + * link tuning. The result is a value between 0 and 100 which + * is an indication of the signal quality. + */ +int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi); + +/** + * rt2x00link_start_tuner - Start periodic link tuner work + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * + * This start the link tuner periodic work, this work will + * be executed periodically until &rt2x00link_stop_tuner has + * been called. + */ +void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev); + +/** + * rt2x00link_stop_tuner - Stop periodic link tuner work + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * + * After this function completed the link tuner will not + * be running until &rt2x00link_start_tuner is called. + */ +void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev); + +/** + * rt2x00link_reset_tuner - Reset periodic link tuner work + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @antenna: Should the antenna tuning also be reset + * + * The VGC limit configured in the hardware will be reset to 0 + * which forces the driver to rediscover the correct value for + * the current association. This is needed when configuration + * options have changed which could drastically change the + * SNR level or link quality (i.e. changing the antenna setting). + * + * Resetting the link tuner will also cause the periodic work counter + * to be reset. Any driver which has a fixed limit on the number + * of rounds the link tuner is supposed to work will accept the + * tuner actions again if this limit was previously reached. + * + * If @antenna is set to true a the software antenna diversity + * tuning will also be reset. + */ +void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna); + +/** + * rt2x00link_register - Initialize link tuning functionality + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * + * Initialize work structure and all link tuning related + * paramters. This will not start the link tuning process itself. + */ +void rt2x00link_register(struct rt2x00_dev *rt2x00dev); + /* * Firmware handlers. */ @@ -179,7 +264,7 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb); void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, - enum cipher cipher, enum rx_crypto status); + struct rxdone_entry_desc *rxdesc); #else static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) { @@ -196,8 +281,7 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, } static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, - enum cipher cipher, - enum rx_crypto status) + struct rxdone_entry_desc *rxdesc) { } #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ @@ -209,7 +293,8 @@ static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc); -unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info); +unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb); void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len); void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); @@ -227,7 +312,8 @@ static inline void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, { } -static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb) { return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c new file mode 100644 index 00000000000..7eb5cd7e5f3 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -0,0 +1,471 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 generic link tuning routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +/* + * When we lack RSSI information return something less then -80 to + * tell the driver to tune the device to maximum sensitivity. + */ +#define DEFAULT_RSSI -128 + +/* + * When no TX/RX percentage could be calculated due to lack of + * frames on the air, we fallback to a percentage of 50%. + * This will assure we will get at least get some decent value + * when the link tuner starts. + * The value will be dropped and overwritten with the correct (measured) + * value anyway during the first run of the link tuner. + */ +#define DEFAULT_PERCENTAGE 50 + +/* + * Small helper macro to work with moving/walking averages. + * When adding a value to the average value the following calculation + * is needed: + * + * avg_rssi = ((avg_rssi * 7) + rssi) / 8; + * + * The advantage of this approach is that we only need 1 variable + * to store the average in (No need for a count and a total). + * But more importantly, normal average values will over time + * move less and less towards newly added values this results + * that with link tuning, the device can have a very good RSSI + * for a few minutes but when the device is moved away from the AP + * the average will not decrease fast enough to compensate. + * The walking average compensates this and will move towards + * the new values correctly allowing a effective link tuning. + */ +#define MOVING_AVERAGE(__avg, __val, __samples) \ + ( (((__avg) * ((__samples) - 1)) + (__val)) / (__samples) ) + +/* + * Small helper macro for percentage calculation + * This is a very simple macro with the only catch that it will + * produce a default value in case no total value was provided. + */ +#define PERCENTAGE(__value, __total) \ + ( (__total) ? (((__value) * 100) / (__total)) : (DEFAULT_PERCENTAGE) ) + +/* + * For calculating the Signal quality we have determined + * the total number of success and failed RX and TX frames. + * With the addition of the average RSSI value we can determine + * the link quality using the following algorithm: + * + * rssi_percentage = (avg_rssi * 100) / rssi_offset + * rx_percentage = (rx_success * 100) / rx_total + * tx_percentage = (tx_success * 100) / tx_total + * avg_signal = ((WEIGHT_RSSI * avg_rssi) + + * (WEIGHT_TX * tx_percentage) + + * (WEIGHT_RX * rx_percentage)) / 100 + * + * This value should then be checked to not be greater then 100. + * This means the values of WEIGHT_RSSI, WEIGHT_RX, WEIGHT_TX must + * sum up to 100 as well. + */ +#define WEIGHT_RSSI 20 +#define WEIGHT_RX 40 +#define WEIGHT_TX 40 + +static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev) +{ + struct link_ant *ant = &rt2x00dev->link.ant; + + if (ant->rssi_ant && rt2x00dev->link.qual.rx_success) + return ant->rssi_ant; + return DEFAULT_RSSI; +} + +static int rt2x00link_antenna_get_rssi_history(struct rt2x00_dev *rt2x00dev, + enum antenna antenna) +{ + struct link_ant *ant = &rt2x00dev->link.ant; + + if (ant->rssi_history[antenna - ANTENNA_A]) + return ant->rssi_history[antenna - ANTENNA_A]; + return DEFAULT_RSSI; +} +/* Small wrapper for rt2x00link_antenna_get_rssi_history() */ +#define rt2x00link_antenna_get_rssi_rx_history(__dev) \ + rt2x00link_antenna_get_rssi_history((__dev), \ + (__dev)->link.ant.active.rx) +#define rt2x00link_antenna_get_rssi_tx_history(__dev) \ + rt2x00link_antenna_get_rssi_history((__dev), \ + (__dev)->link.ant.active.tx) + +static void rt2x00link_antenna_update_rssi_history(struct rt2x00_dev *rt2x00dev, + enum antenna antenna, + int rssi) +{ + struct link_ant *ant = &rt2x00dev->link.ant; + ant->rssi_history[ant->active.rx - ANTENNA_A] = rssi; +} +/* Small wrapper for rt2x00link_antenna_get_rssi_history() */ +#define rt2x00link_antenna_update_rssi_rx_history(__dev, __rssi) \ + rt2x00link_antenna_update_rssi_history((__dev), \ + (__dev)->link.ant.active.rx, \ + (__rssi)) +#define rt2x00link_antenna_update_rssi_tx_history(__dev, __rssi) \ + rt2x00link_antenna_update_rssi_history((__dev), \ + (__dev)->link.ant.active.tx, \ + (__rssi)) + +static void rt2x00link_antenna_reset(struct rt2x00_dev *rt2x00dev) +{ + rt2x00dev->link.ant.rssi_ant = 0; +} + +static void rt2x00lib_antenna_diversity_sample(struct rt2x00_dev *rt2x00dev) +{ + struct link_ant *ant = &rt2x00dev->link.ant; + struct antenna_setup new_ant; + int sample_a = rt2x00link_antenna_get_rssi_history(rt2x00dev, ANTENNA_A); + int sample_b = rt2x00link_antenna_get_rssi_history(rt2x00dev, ANTENNA_B); + + memcpy(&new_ant, &ant->active, sizeof(new_ant)); + + /* + * We are done sampling. Now we should evaluate the results. + */ + ant->flags &= ~ANTENNA_MODE_SAMPLE; + + /* + * During the last period we have sampled the RSSI + * from both antenna's. It now is time to determine + * which antenna demonstrated the best performance. + * When we are already on the antenna with the best + * performance, then there really is nothing for us + * left to do. + */ + if (sample_a == sample_b) + return; + + if (ant->flags & ANTENNA_RX_DIVERSITY) + new_ant.rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; + + if (ant->flags & ANTENNA_TX_DIVERSITY) + new_ant.tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; + + rt2x00lib_config_antenna(rt2x00dev, &new_ant); +} + +static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev) +{ + struct link_ant *ant = &rt2x00dev->link.ant; + struct antenna_setup new_ant; + int rssi_curr; + int rssi_old; + + memcpy(&new_ant, &ant->active, sizeof(new_ant)); + + /* + * Get current RSSI value along with the historical value, + * after that update the history with the current value. + */ + rssi_curr = rt2x00link_antenna_get_link_rssi(rt2x00dev); + rssi_old = rt2x00link_antenna_get_rssi_rx_history(rt2x00dev); + rt2x00link_antenna_update_rssi_rx_history(rt2x00dev, rssi_curr); + + /* + * Legacy driver indicates that we should swap antenna's + * when the difference in RSSI is greater that 5. This + * also should be done when the RSSI was actually better + * then the previous sample. + * When the difference exceeds the threshold we should + * sample the rssi from the other antenna to make a valid + * comparison between the 2 antennas. + */ + if (abs(rssi_curr - rssi_old) < 5) + return; + + ant->flags |= ANTENNA_MODE_SAMPLE; + + if (ant->flags & ANTENNA_RX_DIVERSITY) + new_ant.rx = (new_ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + + if (ant->flags & ANTENNA_TX_DIVERSITY) + new_ant.tx = (new_ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + + rt2x00lib_config_antenna(rt2x00dev, &new_ant); +} + +static void rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev) +{ + struct link_ant *ant = &rt2x00dev->link.ant; + + /* + * Determine if software diversity is enabled for + * either the TX or RX antenna (or both). + * Always perform this check since within the link + * tuner interval the configuration might have changed. + */ + ant->flags &= ~ANTENNA_RX_DIVERSITY; + ant->flags &= ~ANTENNA_TX_DIVERSITY; + + if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) + ant->flags |= ANTENNA_RX_DIVERSITY; + if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) + ant->flags |= ANTENNA_TX_DIVERSITY; + + if (!(ant->flags & ANTENNA_RX_DIVERSITY) && + !(ant->flags & ANTENNA_TX_DIVERSITY)) { + ant->flags = 0; + return; + } + + /* + * If we have only sampled the data over the last period + * we should now harvest the data. Otherwise just evaluate + * the data. The latter should only be performed once + * every 2 seconds. + */ + if (ant->flags & ANTENNA_MODE_SAMPLE) + rt2x00lib_antenna_diversity_sample(rt2x00dev); + else if (rt2x00dev->link.count & 1) + rt2x00lib_antenna_diversity_eval(rt2x00dev); +} + +void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct rxdone_entry_desc *rxdesc) +{ + struct link *link = &rt2x00dev->link; + struct link_qual *qual = &rt2x00dev->link.qual; + struct link_ant *ant = &rt2x00dev->link.ant; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + int avg_rssi = rxdesc->rssi; + int ant_rssi = rxdesc->rssi; + + /* + * Frame was received successfully since non-succesfull + * frames would have been dropped by the hardware. + */ + qual->rx_success++; + + /* + * We are only interested in quality statistics from + * beacons which came from the BSS which we are + * associated with. + */ + if (!ieee80211_is_beacon(hdr->frame_control) || + !(rxdesc->dev_flags & RXDONE_MY_BSS)) + return; + + /* + * Update global RSSI + */ + if (link->avg_rssi) + avg_rssi = MOVING_AVERAGE(link->avg_rssi, rxdesc->rssi, 8); + link->avg_rssi = avg_rssi; + + /* + * Update antenna RSSI + */ + if (ant->rssi_ant) + ant_rssi = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi, 8); + ant->rssi_ant = ant_rssi; +} + +static void rt2x00link_precalculate_signal(struct rt2x00_dev *rt2x00dev) +{ + struct link *link = &rt2x00dev->link; + struct link_qual *qual = &rt2x00dev->link.qual; + + link->rx_percentage = + PERCENTAGE(qual->rx_success, qual->rx_failed + qual->rx_success); + link->tx_percentage = + PERCENTAGE(qual->tx_success, qual->tx_failed + qual->tx_success); +} + +int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi) +{ + struct link *link = &rt2x00dev->link; + int rssi_percentage = 0; + int signal; + + /* + * We need a positive value for the RSSI. + */ + if (rssi < 0) + rssi += rt2x00dev->rssi_offset; + + /* + * Calculate the different percentages, + * which will be used for the signal. + */ + rssi_percentage = PERCENTAGE(rssi, rt2x00dev->rssi_offset); + + /* + * Add the individual percentages and use the WEIGHT + * defines to calculate the current link signal. + */ + signal = ((WEIGHT_RSSI * rssi_percentage) + + (WEIGHT_TX * link->tx_percentage) + + (WEIGHT_RX * link->rx_percentage)) / 100; + + return max_t(int, signal, 100); +} + +void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) +{ + struct link *link = &rt2x00dev->link; + + /* + * Link tuning should only be performed when + * an active sta or master interface exists. + * Single monitor mode interfaces should never have + * work with link tuners. + */ + if (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count) + return; + + link->rx_percentage = DEFAULT_PERCENTAGE; + link->tx_percentage = DEFAULT_PERCENTAGE; + + rt2x00link_reset_tuner(rt2x00dev, false); + + queue_delayed_work(rt2x00dev->hw->workqueue, + &link->work, LINK_TUNE_INTERVAL); +} + +void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) +{ + cancel_delayed_work_sync(&rt2x00dev->link.work); +} + +void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna) +{ + struct link_qual *qual = &rt2x00dev->link.qual; + + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Reset link information. + * Both the currently active vgc level as well as + * the link tuner counter should be reset. Resetting + * the counter is important for devices where the + * device should only perform link tuning during the + * first minute after being enabled. + */ + rt2x00dev->link.count = 0; + memset(qual, 0, sizeof(*qual)); + + /* + * Reset the link tuner. + */ + rt2x00dev->ops->lib->reset_tuner(rt2x00dev, qual); + + if (antenna) + rt2x00link_antenna_reset(rt2x00dev); +} + +void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev) +{ + struct link_qual *qual = &rt2x00dev->link.qual; + + qual->rx_success = 0; + qual->rx_failed = 0; + qual->tx_success = 0; + qual->tx_failed = 0; +} + +static void rt2x00link_tuner(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, link.work.work); + struct link *link = &rt2x00dev->link; + struct link_qual *qual = &rt2x00dev->link.qual; + + /* + * When the radio is shutting down we should + * immediately cease all link tuning. + */ + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Update statistics. + */ + rt2x00dev->ops->lib->link_stats(rt2x00dev, qual); + rt2x00dev->low_level_stats.dot11FCSErrorCount += qual->rx_failed; + + /* + * Update quality RSSI for link tuning, + * when we have received some frames and we managed to + * collect the RSSI data we could use this. Otherwise we + * must fallback to the default RSSI value. + */ + if (!link->avg_rssi || !qual->rx_success) + qual->rssi = DEFAULT_RSSI; + else + qual->rssi = link->avg_rssi; + + /* + * Only perform the link tuning when Link tuning + * has been enabled (This could have been disabled from the EEPROM). + */ + if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) + rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count); + + /* + * Precalculate a portion of the link signal which is + * in based on the tx/rx success/failure counters. + */ + rt2x00link_precalculate_signal(rt2x00dev); + + /* + * Send a signal to the led to update the led signal strength. + */ + rt2x00leds_led_quality(rt2x00dev, link->avg_rssi); + + /* + * Evaluate antenna setup, make this the last step since this could + * possibly reset some statistics. + */ + rt2x00lib_antenna_diversity(rt2x00dev); + + /* + * Reset the quality counters which recounted during each period. + */ + rt2x00link_reset_qual(rt2x00dev); + + /* + * Increase tuner counter, and reschedule the next link tuner run. + */ + link->count++; + queue_delayed_work(rt2x00dev->hw->workqueue, + &link->work, LINK_TUNE_INTERVAL); +} + +void rt2x00link_register(struct rt2x00_dev *rt2x00dev) +{ + INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner); +} diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 38edee5fe16..c41a0b9e473 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -79,8 +79,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, * RTS/CTS frame should use the length of the frame plus any * encryption overhead that will be added by the hardware. */ - if (!frag_skb->do_not_encrypt) - data_length += rt2x00crypto_tx_overhead(tx_info); + data_length += rt2x00crypto_tx_overhead(rt2x00dev, skb); if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, @@ -226,6 +225,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, break; case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_WDS: /* * We don't support mixed combinations of * sta and ap interfaces. @@ -430,8 +431,10 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, /* * Update the beacon. */ - if (conf->changed & IEEE80211_IFCC_BEACON) - status = rt2x00queue_update_beacon(rt2x00dev, vif); + if (conf->changed & (IEEE80211_IFCC_BEACON | + IEEE80211_IFCC_BEACON_ENABLED)) + status = rt2x00queue_update_beacon(rt2x00dev, vif, + conf->enable_beacon); return status; } @@ -482,16 +485,36 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); #ifdef CONFIG_RT2X00_LIB_CRYPTO +static void memcpy_tkip(struct rt2x00lib_crypto *crypto, u8 *key, u8 key_len) +{ + if (key_len > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) + memcpy(&crypto->key, + &key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], + sizeof(crypto->key)); + + if (key_len > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) + memcpy(&crypto->tx_mic, + &key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + sizeof(crypto->tx_mic)); + + if (key_len > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) + memcpy(&crypto->rx_mic, + &key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + sizeof(crypto->rx_mic)); +} + int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct ieee80211_sta *sta; + struct rt2x00_intf *intf = vif_to_intf(vif); int (*set_key) (struct rt2x00_dev *rt2x00dev, struct rt2x00lib_crypto *crypto, struct ieee80211_key_conf *key); struct rt2x00lib_crypto crypto; + static const u8 bcast_addr[ETH_ALEN] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, }; if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; @@ -509,45 +532,25 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (rt2x00dev->intf_sta_count) crypto.bssidx = 0; else - crypto.bssidx = - local_address[5] & (rt2x00dev->ops->max_ap_intf - 1); + crypto.bssidx = intf->mac[5] & (rt2x00dev->ops->max_ap_intf - 1); crypto.cipher = rt2x00crypto_key_to_cipher(key); if (crypto.cipher == CIPHER_NONE) return -EOPNOTSUPP; crypto.cmd = cmd; - crypto.address = address; - - if (crypto.cipher == CIPHER_TKIP) { - if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) - memcpy(&crypto.key, - &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], - sizeof(crypto.key)); - - if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) - memcpy(&crypto.tx_mic, - &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], - sizeof(crypto.tx_mic)); - - if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) - memcpy(&crypto.rx_mic, - &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], - sizeof(crypto.rx_mic)); - } else - memcpy(&crypto.key, &key->key[0], key->keylen); - /* - * Discover the Association ID from mac80211. - * Some drivers need this information when updating the - * hardware key (either adding or removing). - */ - rcu_read_lock(); - sta = ieee80211_find_sta(hw, address); - if (sta) + if (sta) { + /* some drivers need the AID */ crypto.aid = sta->aid; - rcu_read_unlock(); + crypto.address = sta->addr; + } else + crypto.address = bcast_addr; + if (crypto.cipher == CIPHER_TKIP) + memcpy_tkip(&crypto, &key->key[0], key->keylen); + else + memcpy(&crypto.key, &key->key[0], key->keylen); /* * Each BSS has a maximum of 4 shared keys. * Shared key index values: diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index d52b22b82d1..e616c20d4a7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 9c0a4d77bc1..15a12487e04 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 0709decec9c..a5664bd8493 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -148,20 +148,105 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) dev_kfree_skb_any(skb); } +static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); + unsigned long irqflags; + + if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) || + unlikely(!tx_info->control.vif)) + return; + + /* + * Hardware should insert sequence counter. + * FIXME: We insert a software sequence counter first for + * hardware that doesn't support hardware sequence counting. + * + * This is wrong because beacons are not getting sequence + * numbers assigned properly. + * + * A secondary problem exists for drivers that cannot toggle + * sequence counting per-frame, since those will override the + * sequence counter given by mac80211. + */ + spin_lock_irqsave(&intf->seqlock, irqflags); + + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock_irqrestore(&intf->seqlock, irqflags); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); +} + +static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry, + struct txentry_desc *txdesc, + const struct rt2x00_rate *hwrate) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; + unsigned int data_length; + unsigned int duration; + unsigned int residual; + + /* Data length + CRC + Crypto overhead (IV/EIV/ICV/MIC) */ + data_length = entry->skb->len + 4; + data_length += rt2x00crypto_tx_overhead(rt2x00dev, entry->skb); + + /* + * PLCP setup + * Length calculation depends on OFDM/CCK rate. + */ + txdesc->signal = hwrate->plcp; + txdesc->service = 0x04; + + if (hwrate->flags & DEV_RATE_OFDM) { + txdesc->length_high = (data_length >> 6) & 0x3f; + txdesc->length_low = data_length & 0x3f; + } else { + /* + * Convert length to microseconds. + */ + residual = GET_DURATION_RES(data_length, hwrate->bitrate); + duration = GET_DURATION(data_length, hwrate->bitrate); + + if (residual != 0) { + duration++; + + /* + * Check if we need to set the Length Extension + */ + if (hwrate->bitrate == 110 && residual <= 30) + txdesc->service |= 0x80; + } + + txdesc->length_high = (duration >> 8) & 0xff; + txdesc->length_low = duration & 0xff; + + /* + * When preamble is enabled we should set the + * preamble bit for the signal. + */ + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + txdesc->signal |= 0x08; + } +} + static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; - struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); const struct rt2x00_rate *hwrate; - unsigned int data_length; - unsigned int duration; - unsigned int residual; - unsigned long irqflags; memset(txdesc, 0, sizeof(*txdesc)); @@ -173,27 +258,12 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; - /* Data length + CRC */ - data_length = entry->skb->len + 4; - /* * Check whether this frame is to be acked. */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) __set_bit(ENTRY_TXD_ACK, &txdesc->flags); - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) && - !entry->skb->do_not_encrypt) { - /* Apply crypto specific descriptor information */ - rt2x00crypto_create_tx_descriptor(entry, txdesc); - - /* - * Extend frame length to include all encryption overhead - * that will be added by the hardware. - */ - data_length += rt2x00crypto_tx_overhead(tx_info); - } - /* * Check if this is a RTS/CTS frame */ @@ -237,86 +307,27 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * Set ifs to IFS_SIFS when the this is not the first fragment, * or this fragment came after RTS/CTS. */ - if (test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { - txdesc->ifs = IFS_SIFS; - } else if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) { + if ((tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) && + !test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags); txdesc->ifs = IFS_BACKOFF; - } else { + } else txdesc->ifs = IFS_SIFS; - } /* - * Hardware should insert sequence counter. - * FIXME: We insert a software sequence counter first for - * hardware that doesn't support hardware sequence counting. - * - * This is wrong because beacons are not getting sequence - * numbers assigned properly. - * - * A secondary problem exists for drivers that cannot toggle - * sequence counting per-frame, since those will override the - * sequence counter given by mac80211. + * Determine rate modulation. */ - if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (likely(tx_info->control.vif)) { - struct rt2x00_intf *intf; - - intf = vif_to_intf(tx_info->control.vif); - - spin_lock_irqsave(&intf->seqlock, irqflags); - - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - intf->seqno += 0x10; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - - spin_unlock_irqrestore(&intf->seqlock, irqflags); - - __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - } - } + hwrate = rt2x00_get_rate(rate->hw_value); + txdesc->rate_mode = RATE_MODE_CCK; + if (hwrate->flags & DEV_RATE_OFDM) + txdesc->rate_mode = RATE_MODE_OFDM; /* - * PLCP setup - * Length calculation depends on OFDM/CCK rate. + * Apply TX descriptor handling by components */ - hwrate = rt2x00_get_rate(rate->hw_value); - txdesc->signal = hwrate->plcp; - txdesc->service = 0x04; - - if (hwrate->flags & DEV_RATE_OFDM) { - __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags); - - txdesc->length_high = (data_length >> 6) & 0x3f; - txdesc->length_low = data_length & 0x3f; - } else { - /* - * Convert length to microseconds. - */ - residual = GET_DURATION_RES(data_length, hwrate->bitrate); - duration = GET_DURATION(data_length, hwrate->bitrate); - - if (residual != 0) { - duration++; - - /* - * Check if we need to set the Length Extension - */ - if (hwrate->bitrate == 110 && residual <= 30) - txdesc->service |= 0x80; - } - - txdesc->length_high = (duration >> 8) & 0xff; - txdesc->length_low = duration & 0xff; - - /* - * When preamble is enabled we should set the - * preamble bit for the signal. - */ - if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->signal |= 0x08; - } + rt2x00crypto_create_tx_descriptor(entry, txdesc); + rt2x00queue_create_tx_descriptor_seq(entry, txdesc); + rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); } static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, @@ -403,7 +414,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { - if (test_bit(CONFIG_CRYPTO_COPY_IV, &queue->rt2x00dev->flags)) + if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags)) rt2x00crypto_tx_copy_iv(skb, iv_len); else rt2x00crypto_tx_remove_iv(skb, iv_len); @@ -432,7 +443,8 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) } int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, - struct ieee80211_vif *vif) + struct ieee80211_vif *vif, + const bool enable_beacon) { struct rt2x00_intf *intf = vif_to_intf(vif); struct skb_frame_desc *skbdesc; @@ -442,6 +454,11 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, if (unlikely(!intf->beacon)) return -ENOBUFS; + if (!enable_beacon) { + rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_BEACON); + return 0; + } + intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif); if (!intf->beacon->skb) return -ENOMEM; @@ -490,6 +507,9 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, { int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + if (queue == QID_RX) + return rt2x00dev->rx; + if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx) return &rt2x00dev->tx[queue]; @@ -566,6 +586,14 @@ static void rt2x00queue_reset(struct data_queue *queue) spin_unlock_irqrestore(&queue->lock, irqflags); } +void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + + txall_queue_for_each(rt2x00dev, queue) + rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, queue->qid); +} + void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 28293715340..97e2ab08f08 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -158,6 +158,14 @@ enum rxdone_entry_desc_flags { }; /** + * RXDONE_SIGNAL_MASK - Define to mask off all &rxdone_entry_desc_flags flags + * except for the RXDONE_SIGNAL_* flags. This is useful to convert the dev_flags + * from &rxdone_entry_desc to a signal value type. + */ +#define RXDONE_SIGNAL_MASK \ + ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE ) + +/** * struct rxdone_entry_desc: RX Entry descriptor * * Summary of information that has been read from the RX frame descriptor. @@ -165,6 +173,7 @@ enum rxdone_entry_desc_flags { * @timestamp: RX Timestamp * @signal: Signal of the received frame. * @rssi: RSSI of the received frame. + * @noise: Measured noise during frame reception. * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). @@ -177,6 +186,7 @@ struct rxdone_entry_desc { u64 timestamp; int signal; int rssi; + int noise; int size; int flags; int dev_flags; @@ -222,7 +232,6 @@ struct txdone_entry_desc { * * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. - * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. @@ -238,7 +247,6 @@ struct txdone_entry_desc { enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, ENTRY_TXD_CTS_FRAME, - ENTRY_TXD_OFDM_RATE, ENTRY_TXD_GENERATE_SEQ, ENTRY_TXD_FIRST_FRAGMENT, ENTRY_TXD_MORE_FRAG, @@ -263,6 +271,7 @@ enum txentry_desc_flags { * @length_low: PLCP length low word. * @signal: PLCP signal. * @service: PLCP service. + * @rate_mode: Rate mode (See @enum rate_modulation). * @retry_limit: Max number of retries. * @aifs: AIFS value. * @ifs: IFS value. @@ -282,6 +291,8 @@ struct txentry_desc { u16 signal; u16 service; + u16 rate_mode; + short retry_limit; short aifs; short ifs; diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index c2fba7c9f05..861322d97fc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -125,6 +125,26 @@ enum cipher { }; /* + * Rate modulations + */ +enum rate_modulation { + RATE_MODE_CCK = 0, + RATE_MODE_OFDM = 1, + RATE_MODE_HT_MIX = 2, + RATE_MODE_HT_GREENFIELD = 3, +}; + +/* + * Firmware validation error codes + */ +enum firmware_errors { + FW_OK, + FW_BAD_CRC, + FW_BAD_LENGTH, + FW_BAD_VERSION, +}; + +/* * Register handlers. * We store the position of a register field inside a field structure, * This will simplify the process of setting and reading a certain field diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index 3298cae1e12..b6d4c6700bf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -25,73 +25,30 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/rfkill.h> #include "rt2x00.h" #include "rt2x00lib.h" -static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) +static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev) { - struct rt2x00_dev *rt2x00dev = data; - int retval = 0; - - if (unlikely(!rt2x00dev)) - return 0; - - /* - * Only continue if there are enabled interfaces. - */ - if (!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) - return 0; - - if (state == RFKILL_STATE_UNBLOCKED) { - INFO(rt2x00dev, "RFKILL event: enabling radio.\n"); - clear_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags); - retval = rt2x00lib_enable_radio(rt2x00dev); - } else if (state == RFKILL_STATE_SOFT_BLOCKED) { - INFO(rt2x00dev, "RFKILL event: disabling radio.\n"); - set_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags); - rt2x00lib_disable_radio(rt2x00dev); - } else { - WARNING(rt2x00dev, "RFKILL event: unknown state %d.\n", state); - } - - return retval; -} - -static int rt2x00rfkill_get_state(void *data, enum rfkill_state *state) -{ - struct rt2x00_dev *rt2x00dev = data; - - /* - * rfkill_poll reports 1 when the key has been pressed and the - * radio should be blocked. - */ - *state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ? - RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; - - return 0; -} - -static void rt2x00rfkill_poll(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, rfkill_work.work); - enum rfkill_state state; + struct rt2x00_dev *rt2x00dev = poll_dev->private; + int state, old_state; if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state) || !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return; /* - * Poll latest state and report it to rfkill who should sort - * out if the state should be toggled or not. + * Poll latest state, if the state is different then the previous state, + * we should generate an input event. */ - if (!rt2x00rfkill_get_state(rt2x00dev, &state)) - rfkill_force_state(rt2x00dev->rfkill, state); + state = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); + old_state = !!test_bit(RFKILL_STATE_BLOCKED, &rt2x00dev->rfkill_state); - queue_delayed_work(rt2x00dev->hw->workqueue, - &rt2x00dev->rfkill_work, RFKILL_POLL_INTERVAL); + if (old_state != state) { + input_report_switch(poll_dev->input, SW_RFKILL_ALL, state); + change_bit(RFKILL_STATE_BLOCKED, &rt2x00dev->rfkill_state); + } } void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) @@ -100,8 +57,8 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) return; - if (rfkill_register(rt2x00dev->rfkill)) { - ERROR(rt2x00dev, "Failed to register rfkill handler.\n"); + if (input_register_polled_device(rt2x00dev->rfkill_poll_dev)) { + ERROR(rt2x00dev, "Failed to register polled device.\n"); return; } @@ -109,10 +66,10 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) /* * Force initial poll which will detect the initial device state, - * and correctly sends the signal to the rfkill layer about this + * and correctly sends the signal to the input layer about this * state. */ - rt2x00rfkill_poll(&rt2x00dev->rfkill_work.work); + rt2x00rfkill_poll(rt2x00dev->rfkill_poll_dev); } void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) @@ -121,52 +78,50 @@ void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) return; - cancel_delayed_work_sync(&rt2x00dev->rfkill_work); - - rfkill_unregister(rt2x00dev->rfkill); + input_unregister_polled_device(rt2x00dev->rfkill_poll_dev); __clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); } void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) { - struct device *dev = wiphy_dev(rt2x00dev->hw->wiphy); + struct input_polled_dev *poll_dev; - if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) + if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) || + !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return; - rt2x00dev->rfkill = rfkill_allocate(dev, RFKILL_TYPE_WLAN); - if (!rt2x00dev->rfkill) { - ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n"); + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + ERROR(rt2x00dev, "Failed to allocate polled device.\n"); return; } - __set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state); + poll_dev->private = rt2x00dev; + poll_dev->poll = rt2x00rfkill_poll; + poll_dev->poll_interval = RFKILL_POLL_INTERVAL; - rt2x00dev->rfkill->name = rt2x00dev->ops->name; - rt2x00dev->rfkill->data = rt2x00dev; - rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; - if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) { - rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state; - rt2x00dev->rfkill->state = - rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ? - RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; - } else { - rt2x00dev->rfkill->state = RFKILL_STATE_UNBLOCKED; - } + poll_dev->input->name = rt2x00dev->ops->name; + poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy); + poll_dev->input->id.bustype = BUS_HOST; + poll_dev->input->id.vendor = 0x1814; + poll_dev->input->id.product = rt2x00dev->chip.rt; + poll_dev->input->id.version = rt2x00dev->chip.rev; + poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy); + poll_dev->input->evbit[0] = BIT(EV_SW); + poll_dev->input->swbit[0] = BIT(SW_RFKILL_ALL); - INIT_DELAYED_WORK(&rt2x00dev->rfkill_work, rt2x00rfkill_poll); + rt2x00dev->rfkill_poll_dev = poll_dev; - return; + __set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state); } void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) + if (!__test_and_clear_bit(RFKILL_STATE_ALLOCATED, + &rt2x00dev->rfkill_state)) return; - cancel_delayed_work_sync(&rt2x00dev->rfkill_work); - - rfkill_free(rt2x00dev->rfkill); - rt2x00dev->rfkill = NULL; + input_free_polled_device(rt2x00dev->rfkill_poll_dev); + rt2x00dev->rfkill_poll_dev = NULL; } diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 0b29d767a25..7d50ca82375 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -296,6 +296,41 @@ void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue); +void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); + struct queue_entry_priv_usb *entry_priv; + struct queue_entry_priv_usb_bcn *bcn_priv; + unsigned int i; + bool kill_guard; + + /* + * When killing the beacon queue, we must also kill + * the beacon guard byte. + */ + kill_guard = + (qid == QID_BEACON) && + (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)); + + /* + * Cancel all entries. + */ + for (i = 0; i < queue->limit; i++) { + entry_priv = queue->entries[i].priv_data; + usb_kill_urb(entry_priv->urb); + + /* + * Kill guardian urb (if required by driver). + */ + if (kill_guard) { + bcn_priv = queue->entries[i].priv_data; + usb_kill_urb(bcn_priv->guardian_urb); + } + } +} +EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue); + /* * RX data handlers. */ @@ -338,35 +373,14 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) */ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - struct queue_entry_priv_usb *entry_priv; - struct queue_entry_priv_usb_bcn *bcn_priv; - struct data_queue *queue; - unsigned int i; - rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, REGISTER_TIMEOUT); /* - * Cancel all queues. + * The USB version of kill_tx_queue also works + * on the RX queue. */ - queue_for_each(rt2x00dev, queue) { - for (i = 0; i < queue->limit; i++) { - entry_priv = queue->entries[i].priv_data; - usb_kill_urb(entry_priv->urb); - } - } - - /* - * Kill guardian urb (if required by driver). - */ - if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) - return; - - for (i = 0; i < rt2x00dev->bcn->limit; i++) { - bcn_priv = rt2x00dev->bcn->entries[i].priv_data; - if (bcn_priv->guardian_urb) - usb_kill_urb(bcn_priv->guardian_urb); - } + rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_RX); } EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 2bd4ac855f5..bd2d59c85f1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -419,6 +419,17 @@ struct queue_entry_priv_usb_bcn { void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, const enum data_queue_qid qid); +/** + * rt2x00usb_kill_tx_queue - Kill data queue + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @qid: Data queue to kill + * + * This will walk through all entries of the queue and kill all + * previously kicked frames before they can be send. + */ +void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid); + /* * Device initialization handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 987e89009f7..2ca8b7a9722 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -123,9 +123,6 @@ static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev, { u32 reg; - if (!word) - return; - mutex_lock(&rt2x00dev->csr_mutex); /* @@ -146,12 +143,6 @@ static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev, mutex_unlock(&rt2x00dev->csr_mutex); } -#ifdef CONFIG_RT2X00_LIB_LEDS -/* - * This function is only called from rt61pci_led_brightness() - * make gcc happy by placing this function inside the - * same ifdef statement as the caller. - */ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) @@ -180,7 +171,6 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, mutex_unlock(&rt2x00dev->csr_mutex); } -#endif /* CONFIG_RT2X00_LIB_LEDS */ static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { @@ -967,6 +957,50 @@ static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); } +static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2x00pci_register_read(rt2x00dev, MAC_CSR11, ®); + rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, + libconf->conf->beacon_int - 10); + rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); + + /* We must first disable autowake before it can be enabled */ + rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg); + + rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg); + + rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000005); + rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x0000001c); + rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000060); + + rt61pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); + } else { + rt2x00pci_register_read(rt2x00dev, MAC_CSR11, ®); + rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, 0); + rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0); + rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); + rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 0); + rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg); + + rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007); + rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x00000018); + rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000020); + + rt61pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + } +} + static void rt61pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) @@ -984,6 +1018,8 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, rt61pci_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt61pci_config_duration(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt61pci_config_ps(rt2x00dev, libconf); } /* @@ -1007,21 +1043,28 @@ static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev, qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); } -static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev) +static inline void rt61pci_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level != vgc_level) { + rt61pci_bbp_write(rt2x00dev, 17, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) { - rt61pci_bbp_write(rt2x00dev, 17, 0x20); - rt2x00dev->link.vgc_level = 0x20; + rt61pci_set_vgc(rt2x00dev, qual, 0x20); } -static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) +static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) { - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u8 r17; u8 up_bound; u8 low_bound; - rt61pci_bbp_read(rt2x00dev, 17, &r17); - /* * Determine r17 bounds. */ @@ -1051,38 +1094,32 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) /* * Special big-R17 for very short distance */ - if (rssi >= -35) { - if (r17 != 0x60) - rt61pci_bbp_write(rt2x00dev, 17, 0x60); + if (qual->rssi >= -35) { + rt61pci_set_vgc(rt2x00dev, qual, 0x60); return; } /* * Special big-R17 for short distance */ - if (rssi >= -58) { - if (r17 != up_bound) - rt61pci_bbp_write(rt2x00dev, 17, up_bound); + if (qual->rssi >= -58) { + rt61pci_set_vgc(rt2x00dev, qual, up_bound); return; } /* * Special big-R17 for middle-short distance */ - if (rssi >= -66) { - low_bound += 0x10; - if (r17 != low_bound) - rt61pci_bbp_write(rt2x00dev, 17, low_bound); + if (qual->rssi >= -66) { + rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x10); return; } /* * Special mid-R17 for middle distance */ - if (rssi >= -74) { - low_bound += 0x08; - if (r17 != low_bound) - rt61pci_bbp_write(rt2x00dev, 17, low_bound); + if (qual->rssi >= -74) { + rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x08); return; } @@ -1090,12 +1127,12 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) * Special case: Change up_bound based on the rssi. * Lower up_bound when rssi is weaker then -74 dBm. */ - up_bound -= 2 * (-74 - rssi); + up_bound -= 2 * (-74 - qual->rssi); if (low_bound > up_bound) up_bound = low_bound; - if (r17 > up_bound) { - rt61pci_bbp_write(rt2x00dev, 17, up_bound); + if (qual->vgc_level > up_bound) { + rt61pci_set_vgc(rt2x00dev, qual, up_bound); return; } @@ -1105,15 +1142,10 @@ dynamic_cca_tune: * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { - if (++r17 > up_bound) - r17 = up_bound; - rt61pci_bbp_write(rt2x00dev, 17, r17); - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { - if (--r17 < low_bound) - r17 = low_bound; - rt61pci_bbp_write(rt2x00dev, 17, r17); - } + if ((qual->false_cca > 512) && (qual->vgc_level < up_bound)) + rt61pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level); + else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound)) + rt61pci_set_vgc(rt2x00dev, qual, --qual->vgc_level); } /* @@ -1141,25 +1173,37 @@ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) return fw_name; } -static u16 rt61pci_get_firmware_crc(const void *data, const size_t len) +static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) { + u16 fw_crc; u16 crc; /* - * Use the crc itu-t algorithm. + * Only support 8kb firmware files. + */ + if (len != 8192) + return FW_BAD_LENGTH; + + /* * The last 2 bytes in the firmware array are the crc checksum itself, * this means that we should never pass those 2 bytes to the crc * algorithm. */ + fw_crc = (data[len - 2] << 8 | data[len - 1]); + + /* + * Use the crc itu-t algorithm. + */ crc = crc_itu_t(0, data, len - 2); crc = crc_itu_t_byte(crc, 0); crc = crc_itu_t_byte(crc, 0); - return crc; + return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; } -static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, - const size_t len) +static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) { int i; u32 reg; @@ -1656,24 +1700,10 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); - /* - * Disable synchronisation. + * Disable power */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); - - /* - * Cancel RX and TX. - */ - rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); - rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); + rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); } static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) @@ -1812,7 +1842,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + (txdesc->rate_mode == RATE_MODE_OFDM)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); @@ -1896,6 +1926,24 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } +static void rt61pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + u32 reg; + + if (qid == QID_BEACON) { + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); + return; + } + + rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, (qid == QID_AC_BE)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, (qid == QID_AC_BK)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, (qid == QID_AC_VI)); + rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, (qid == QID_AC_VO)); + rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); +} + /* * RX control handlers */ @@ -2195,7 +2243,8 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) if (word == 0xffff) { rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0); rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0); - rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0); + rt2x00_set_field16(&word, EEPROM_NIC_RX_FIXED, 0); + rt2x00_set_field16(&word, EEPROM_NIC_TX_FIXED, 0); rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); @@ -2339,24 +2388,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) */ if (rt2x00_rf(&rt2x00dev->chip, RF2529) && !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) { - switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { - case 0: - rt2x00dev->default_ant.tx = ANTENNA_B; - rt2x00dev->default_ant.rx = ANTENNA_A; - break; - case 1: - rt2x00dev->default_ant.tx = ANTENNA_B; - rt2x00dev->default_ant.rx = ANTENNA_B; - break; - case 2: - rt2x00dev->default_ant.tx = ANTENNA_A; - rt2x00dev->default_ant.rx = ANTENNA_A; - break; - case 3: - rt2x00dev->default_ant.tx = ANTENNA_A; - rt2x00dev->default_ant.rx = ANTENNA_B; - break; - } + rt2x00dev->default_ant.rx = + ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED); + rt2x00dev->default_ant.tx = + ANTENNA_B - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_FIXED); if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY; @@ -2534,7 +2569,9 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = 0; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); @@ -2633,6 +2670,7 @@ static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, struct rt2x00_field32 field; int retval; u32 reg; + u32 offset; /* * First pass the configuration through rt2x00lib, that will @@ -2644,24 +2682,23 @@ static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, if (retval) return retval; + /* + * We only need to perform additional register initialization + * for WMM queues/ + */ + if (queue_idx >= 4) + return 0; + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); /* Update WMM TXOP register */ - if (queue_idx < 2) { - field.bit_offset = queue_idx * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - } else if (queue_idx < 4) { - field.bit_offset = (queue_idx - 2) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - } + offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); + field.bit_offset = (queue_idx & 1) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, offset, reg); /* Update WMM registers */ field.bit_offset = queue_idx * 4; @@ -2717,7 +2754,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .irq_handler = rt61pci_interrupt, .probe_hw = rt61pci_probe_hw, .get_firmware_name = rt61pci_get_firmware_name, - .get_firmware_crc = rt61pci_get_firmware_crc, + .check_firmware = rt61pci_check_firmware, .load_firmware = rt61pci_load_firmware, .initialize = rt2x00pci_initialize, .uninitialize = rt2x00pci_uninitialize, @@ -2732,6 +2769,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .write_beacon = rt61pci_write_beacon, .kick_tx_queue = rt61pci_kick_tx_queue, + .kill_tx_queue = rt61pci_kill_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, .config_shared_key = rt61pci_config_shared_key, .config_pairwise_key = rt61pci_config_pairwise_key, diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 65fe3332364..41e8959919f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -50,8 +50,8 @@ #define EEPROM_SIZE 0x0100 #define BBP_BASE 0x0000 #define BBP_SIZE 0x0080 -#define RF_BASE 0x0000 -#define RF_SIZE 0x0014 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 /* * Number of TX queues. @@ -88,8 +88,10 @@ /* * SOFT_RESET_CSR + * FORCE_CLOCK_ON: Host force MAC clock ON */ #define SOFT_RESET_CSR 0x0010 +#define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002) /* * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register. @@ -1054,8 +1056,10 @@ struct hw_pairwise_ta_entry { /* * IO_CNTL_CSR + * RF_PS: Set RF interface value to power save */ #define IO_CNTL_CSR 0x3498 +#define IO_CNTL_CSR_RF_PS FIELD32(0x00000004) /* * UART_INT_SOURCE_CSR @@ -1186,7 +1190,8 @@ struct hw_pairwise_ta_entry { #define EEPROM_NIC 0x0011 #define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001) #define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002) -#define EEPROM_NIC_TX_RX_FIXED FIELD16(0x000c) +#define EEPROM_NIC_RX_FIXED FIELD16(0x0004) +#define EEPROM_NIC_TX_FIXED FIELD16(0x0008) #define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010) #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020) #define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 96a8d69f879..420fff42c0d 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -122,9 +122,6 @@ static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, { u32 reg; - if (!word) - return; - mutex_lock(&rt2x00dev->csr_mutex); /* @@ -186,6 +183,18 @@ static const struct rt2x00debug rt73usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +#ifdef CONFIG_RT2X00_LIB_RFKILL +static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®); + return rt2x00_get_field32(reg, MAC_CSR13_BIT7); +} +#else +#define rt73usb_rfkill_poll NULL +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + #ifdef CONFIG_RT2X00_LIB_LEDS static void rt73usb_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) @@ -844,6 +853,44 @@ static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } +static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®); + rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, + libconf->conf->beacon_int - 10); + rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); + + /* We must first disable autowake before it can be enabled */ + rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); + rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg); + + rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 1); + rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg); + + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, + USB_MODE_SLEEP, REGISTER_TIMEOUT); + } else { + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, + USB_MODE_WAKEUP, REGISTER_TIMEOUT); + + rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®); + rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, 0); + rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0); + rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0); + rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 0); + rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg); + } +} + static void rt73usb_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) @@ -861,6 +908,8 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev, rt73usb_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt73usb_config_duration(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt73usb_config_ps(rt2x00dev, libconf); } /* @@ -884,21 +933,28 @@ static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev, qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); } -static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev) +static inline void rt73usb_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) { - rt73usb_bbp_write(rt2x00dev, 17, 0x20); - rt2x00dev->link.vgc_level = 0x20; + if (qual->vgc_level != vgc_level) { + rt73usb_bbp_write(rt2x00dev, 17, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } } -static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) +static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual) +{ + rt73usb_set_vgc(rt2x00dev, qual, 0x20); +} + +static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) { - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u8 r17; u8 up_bound; u8 low_bound; - rt73usb_bbp_read(rt2x00dev, 17, &r17); - /* * Determine r17 bounds. */ @@ -911,10 +967,10 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) up_bound += 0x10; } } else { - if (rssi > -82) { + if (qual->rssi > -82) { low_bound = 0x1c; up_bound = 0x40; - } else if (rssi > -84) { + } else if (qual->rssi > -84) { low_bound = 0x1c; up_bound = 0x20; } else { @@ -938,37 +994,32 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) /* * Special big-R17 for very short distance */ - if (rssi > -35) { - if (r17 != 0x60) - rt73usb_bbp_write(rt2x00dev, 17, 0x60); + if (qual->rssi > -35) { + rt73usb_set_vgc(rt2x00dev, qual, 0x60); return; } /* * Special big-R17 for short distance */ - if (rssi >= -58) { - if (r17 != up_bound) - rt73usb_bbp_write(rt2x00dev, 17, up_bound); + if (qual->rssi >= -58) { + rt73usb_set_vgc(rt2x00dev, qual, up_bound); return; } /* * Special big-R17 for middle-short distance */ - if (rssi >= -66) { - low_bound += 0x10; - if (r17 != low_bound) - rt73usb_bbp_write(rt2x00dev, 17, low_bound); + if (qual->rssi >= -66) { + rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x10); return; } /* * Special mid-R17 for middle distance */ - if (rssi >= -74) { - if (r17 != (low_bound + 0x10)) - rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08); + if (qual->rssi >= -74) { + rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x08); return; } @@ -976,12 +1027,12 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) * Special case: Change up_bound based on the rssi. * Lower up_bound when rssi is weaker then -74 dBm. */ - up_bound -= 2 * (-74 - rssi); + up_bound -= 2 * (-74 - qual->rssi); if (low_bound > up_bound) up_bound = low_bound; - if (r17 > up_bound) { - rt73usb_bbp_write(rt2x00dev, 17, up_bound); + if (qual->vgc_level > up_bound) { + rt73usb_set_vgc(rt2x00dev, qual, up_bound); return; } @@ -991,17 +1042,12 @@ dynamic_cca_tune: * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { - r17 += 4; - if (r17 > up_bound) - r17 = up_bound; - rt73usb_bbp_write(rt2x00dev, 17, r17); - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { - r17 -= 4; - if (r17 < low_bound) - r17 = low_bound; - rt73usb_bbp_write(rt2x00dev, 17, r17); - } + if ((qual->false_cca > 512) && (qual->vgc_level < up_bound)) + rt73usb_set_vgc(rt2x00dev, qual, + min_t(u8, qual->vgc_level + 4, up_bound)); + else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound)) + rt73usb_set_vgc(rt2x00dev, qual, + max_t(u8, qual->vgc_level - 4, low_bound)); } /* @@ -1012,25 +1058,37 @@ static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) return FIRMWARE_RT2571; } -static u16 rt73usb_get_firmware_crc(const void *data, const size_t len) +static int rt73usb_check_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) { + u16 fw_crc; u16 crc; /* - * Use the crc itu-t algorithm. + * Only support 2kb firmware files. + */ + if (len != 2048) + return FW_BAD_LENGTH; + + /* * The last 2 bytes in the firmware array are the crc checksum itself, * this means that we should never pass those 2 bytes to the crc * algorithm. */ + fw_crc = (data[len - 2] << 8 | data[len - 1]); + + /* + * Use the crc itu-t algorithm. + */ crc = crc_itu_t(0, data, len - 2); crc = crc_itu_t_byte(crc, 0); crc = crc_itu_t_byte(crc, 0); - return crc; + return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; } -static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, - const size_t len) +static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) { unsigned int i; int status; @@ -1449,7 +1507,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + (txdesc->rate_mode == RATE_MODE_OFDM)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); @@ -1816,6 +1874,14 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); /* + * Detect if this device has an hardware controlled radio. + */ +#ifdef CONFIG_RT2X00_LIB_RFKILL + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); +#endif /* CONFIG_RT2X00_LIB_RFKILL */ + + /* * Read frequency offset. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); @@ -2020,7 +2086,9 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); @@ -2121,6 +2189,7 @@ static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, struct rt2x00_field32 field; int retval; u32 reg; + u32 offset; /* * First pass the configuration through rt2x00lib, that will @@ -2132,24 +2201,23 @@ static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, if (retval) return retval; + /* + * We only need to perform additional register initialization + * for WMM queues/ + */ + if (queue_idx >= 4) + return 0; + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); /* Update WMM TXOP register */ - if (queue_idx < 2) { - field.bit_offset = queue_idx * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - } else if (queue_idx < 4) { - field.bit_offset = (queue_idx - 2) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - } + offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); + field.bit_offset = (queue_idx & 1) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00usb_register_write(rt2x00dev, offset, reg); /* Update WMM registers */ field.bit_offset = queue_idx * 4; @@ -2170,13 +2238,6 @@ static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, return 0; } -#if 0 -/* - * Mac80211 demands get_tsf must be atomic. - * This is not possible for rt73usb since all register access - * functions require sleeping. Untill mac80211 no longer needs - * get_tsf to be atomic, this function should be disabled. - */ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -2190,9 +2251,6 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) return tsf; } -#else -#define rt73usb_get_tsf NULL -#endif static const struct ieee80211_ops rt73usb_mac80211_ops = { .tx = rt2x00mac_tx, @@ -2214,12 +2272,13 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .probe_hw = rt73usb_probe_hw, .get_firmware_name = rt73usb_get_firmware_name, - .get_firmware_crc = rt73usb_get_firmware_crc, + .check_firmware = rt73usb_check_firmware, .load_firmware = rt73usb_load_firmware, .initialize = rt2x00usb_initialize, .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt73usb_set_device_state, + .rfkill_poll = rt73usb_rfkill_poll, .link_stats = rt73usb_link_stats, .reset_tuner = rt73usb_reset_tuner, .link_tuner = rt73usb_link_tuner, @@ -2228,6 +2287,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .write_beacon = rt73usb_write_beacon, .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt73usb_kick_tx_queue, + .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, .config_shared_key = rt73usb_config_shared_key, .config_pairwise_key = rt73usb_config_pairwise_key, @@ -2281,7 +2341,18 @@ static const struct rt2x00_ops rt73usb_ops = { */ static struct usb_device_id rt73usb_device_table[] = { /* AboCom */ + { USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) }, + /* AL */ + { USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Amigo */ + { USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) }, + /* AMIT */ + { USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) }, /* Askey */ { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) }, /* ASUS */ @@ -2294,7 +2365,9 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) }, /* Billionton */ { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) }, /* Buffalo */ + { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, /* CNet */ { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) }, @@ -2308,6 +2381,11 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Edimax */ + { USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) }, + /* EnGenius */ + { USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gigabyte */ @@ -2328,22 +2406,36 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, /* Ralink */ + { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) }, /* Qcom */ { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Samsung */ + { USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) }, /* Senao */ { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) }, /* Sitecom */ - { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) }, /* Surecom */ { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Tilgin */ + { USB_DEVICE(0x6933, 0x5001), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Philips */ + { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) }, /* Planex */ { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Zcom */ + { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) }, + /* ZyXEL */ + { USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) }, { 0, } }; diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 46e1405eb0e..c8016f65b4b 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -50,8 +50,8 @@ #define EEPROM_SIZE 0x0100 #define BBP_BASE 0x0000 #define BBP_SIZE 0x0080 -#define RF_BASE 0x0000 -#define RF_SIZE 0x0014 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 /* * Number of TX queues. @@ -267,6 +267,19 @@ struct hw_pairwise_ta_entry { * MAC_CSR13: GPIO. */ #define MAC_CSR13 0x3034 +#define MAC_CSR13_BIT0 FIELD32(0x00000001) +#define MAC_CSR13_BIT1 FIELD32(0x00000002) +#define MAC_CSR13_BIT2 FIELD32(0x00000004) +#define MAC_CSR13_BIT3 FIELD32(0x00000008) +#define MAC_CSR13_BIT4 FIELD32(0x00000010) +#define MAC_CSR13_BIT5 FIELD32(0x00000020) +#define MAC_CSR13_BIT6 FIELD32(0x00000040) +#define MAC_CSR13_BIT7 FIELD32(0x00000080) +#define MAC_CSR13_BIT8 FIELD32(0x00000100) +#define MAC_CSR13_BIT9 FIELD32(0x00000200) +#define MAC_CSR13_BIT10 FIELD32(0x00000400) +#define MAC_CSR13_BIT11 FIELD32(0x00000800) +#define MAC_CSR13_BIT12 FIELD32(0x00001000) /* * MAC_CSR14: LED control register. |