diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
32 files changed, 4563 insertions, 3205 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index da05b1faf60..a1e3938cba9 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -5,30 +5,28 @@ config RT2X00 This will enable the experimental support for the Ralink drivers, developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. - These drivers will make use of the Devicescape ieee80211 stack. + These drivers will make use of the mac80211 stack. When building one of the individual drivers, the rt2x00 library will also be created. That library (when the driver is built as a module) will be called "rt2x00lib.ko". +if RT2X00 + config RT2X00_LIB tristate - depends on RT2X00 config RT2X00_LIB_PCI tristate - depends on RT2X00 select RT2X00_LIB config RT2X00_LIB_USB tristate - depends on RT2X00 select RT2X00_LIB config RT2X00_LIB_FIRMWARE boolean depends on RT2X00_LIB - select CRC_ITU_T select FW_LOADER config RT2X00_LIB_RFKILL @@ -37,9 +35,13 @@ config RT2X00_LIB_RFKILL select RFKILL select INPUT_POLLDEV +config RT2X00_LIB_LEDS + boolean + depends on RT2X00_LIB + config RT2400PCI tristate "Ralink rt2400 pci/pcmcia support" - depends on RT2X00 && PCI + depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -56,9 +58,16 @@ config RT2400PCI_RFKILL hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. +config RT2400PCI_LEDS + bool "RT2400 leds support" + depends on RT2400PCI && LEDS_CLASS + select RT2X00_LIB_LEDS + ---help--- + This adds support for led triggers provided my mac80211. + config RT2500PCI tristate "Ralink rt2500 pci/pcmcia support" - depends on RT2X00 && PCI + depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- @@ -75,11 +84,19 @@ config RT2500PCI_RFKILL hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. +config RT2500PCI_LEDS + bool "RT2500 leds support" + depends on RT2500PCI && LEDS_CLASS + select RT2X00_LIB_LEDS + ---help--- + This adds support for led triggers provided my mac80211. + config RT61PCI tristate "Ralink rt61 pci/pcmcia support" - depends on RT2X00 && PCI + depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE + select CRC_ITU_T select EEPROM_93CX6 ---help--- This is an experimental driver for the Ralink rt61 wireless chip. @@ -95,25 +112,47 @@ config RT61PCI_RFKILL hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. +config RT61PCI_LEDS + bool "RT61 leds support" + depends on RT61PCI && LEDS_CLASS + select RT2X00_LIB_LEDS + ---help--- + This adds support for led triggers provided my mac80211. + config RT2500USB tristate "Ralink rt2500 usb support" - depends on RT2X00 && USB + depends on USB select RT2X00_LIB_USB ---help--- This is an experimental driver for the Ralink rt2500 wireless chip. When compiled as a module, this driver will be called "rt2500usb.ko". +config RT2500USB_LEDS + bool "RT2500 leds support" + depends on RT2500USB && LEDS_CLASS + select RT2X00_LIB_LEDS + ---help--- + This adds support for led triggers provided my mac80211. + config RT73USB tristate "Ralink rt73 usb support" - depends on RT2X00 && USB + depends on USB select RT2X00_LIB_USB select RT2X00_LIB_FIRMWARE + select CRC_ITU_T ---help--- This is an experimental driver for the Ralink rt73 wireless chip. When compiled as a module, this driver will be called "rt73usb.ko". +config RT73USB_LEDS + bool "RT73 leds support" + depends on RT73USB && LEDS_CLASS + select RT2X00_LIB_LEDS + ---help--- + This adds support for led triggers provided my mac80211. + config RT2X00_LIB_DEBUGFS bool "Ralink debugfs support" depends on RT2X00_LIB && MAC80211_DEBUGFS @@ -128,3 +167,4 @@ config RT2X00_DEBUG ---help--- Enable debugging output for all rt2x00 modules +endif diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 30d654a42ee..1087dbcf1a0 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -1,22 +1,17 @@ -rt2x00lib-objs := rt2x00dev.o rt2x00mac.o rt2x00config.o +rt2x00lib-y += rt2x00dev.o +rt2x00lib-y += rt2x00mac.o +rt2x00lib-y += rt2x00config.o +rt2x00lib-y += rt2x00queue.o +rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o +rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o +rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o +rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o -ifeq ($(CONFIG_RT2X00_LIB_DEBUGFS),y) - rt2x00lib-objs += rt2x00debug.o -endif - -ifeq ($(CONFIG_RT2X00_LIB_RFKILL),y) - rt2x00lib-objs += rt2x00rfkill.o -endif - -ifeq ($(CONFIG_RT2X00_LIB_FIRMWARE),y) - rt2x00lib-objs += rt2x00firmware.o -endif - -obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o -obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o -obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o -obj-$(CONFIG_RT2400PCI) += rt2400pci.o -obj-$(CONFIG_RT2500PCI) += rt2500pci.o -obj-$(CONFIG_RT61PCI) += rt61pci.o -obj-$(CONFIG_RT2500USB) += rt2500usb.o -obj-$(CONFIG_RT73USB) += rt73usb.o +obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o +obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o +obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o +obj-$(CONFIG_RT2400PCI) += rt2400pci.o +obj-$(CONFIG_RT2500PCI) += rt2500pci.o +obj-$(CONFIG_RT61PCI) += rt61pci.o +obj-$(CONFIG_RT2500USB) += rt2500usb.o +obj-$(CONFIG_RT73USB) += rt73usb.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index c69f85ed766..b41187af130 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -243,53 +243,109 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) #define rt2400pci_rfkill_poll NULL #endif /* CONFIG_RT2400PCI_RFKILL */ -/* - * Configuration handlers. - */ -static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, - __le32 *mac) +#ifdef CONFIG_RT2400PCI_LEDS +static void rt2400pci_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - rt2x00pci_register_multiwrite(rt2x00dev, CSR3, mac, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + u32 reg; + + rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®); + + if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) + rt2x00_set_field32(®, LEDCSR_LINK, enabled); + else if (led->type == LED_TYPE_ACTIVITY) + rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled); + + rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg); } -static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, - __le32 *bssid) +static int rt2400pci_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { - rt2x00pci_register_multiwrite(rt2x00dev, CSR5, bssid, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®); + rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off); + rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg); + + return 0; } +#endif /* CONFIG_RT2400PCI_LEDS */ -static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +/* + * Configuration handlers. + */ +static void rt2400pci_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) { u32 reg; - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - /* - * Enable beacon config + * Start configuration steps. + * Note that the version error will always be dropped + * since there is no filter for it at this time. */ - rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, - PREAMBLE + get_duration(IEEE80211_HEADER, 20)); - rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, RXCSR0_DROP_TODS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); +} - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); +static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) +{ + unsigned int bcn_preload; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Enable beacon config + */ + bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20); + rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); + rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); + rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, CSR14_TBCN, 1); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + } + + if (flags & CONFIG_UPDATE_MAC) + rt2x00pci_register_multiwrite(rt2x00dev, CSR3, + conf->mac, sizeof(conf->mac)); + + if (flags & CONFIG_UPDATE_BSSID) + rt2x00pci_register_multiwrite(rt2x00dev, CSR5, + conf->bssid, sizeof(conf->bssid)); } -static void rt2400pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) { int preamble_mask; u32 reg; @@ -297,11 +353,13 @@ static void rt2400pci_config_preamble(struct rt2x00_dev *rt2x00dev, /* * When short preamble is enabled, we should set bit 0x08 */ - preamble_mask = short_preamble << 3; + preamble_mask = erp->short_preamble << 3; rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, ack_timeout); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, ack_consume_time); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, + erp->ack_timeout); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, + erp->ack_consume_time); rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); @@ -397,6 +455,13 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, u8 r1; u8 r4; + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + rt2400pci_bbp_read(rt2x00dev, 4, &r4); rt2400pci_bbp_read(rt2x00dev, 1, &r1); @@ -410,14 +475,8 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, case ANTENNA_A: rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); break; } @@ -432,14 +491,8 @@ static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); break; } @@ -481,8 +534,8 @@ static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt2400pci_config_phymode(rt2x00dev, libconf->basic_rates); @@ -498,45 +551,17 @@ static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, } static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, - struct ieee80211_tx_queue_params *params) + const int cw_min, const int cw_max) { u32 reg; rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_CWMIN, params->cw_min); - rt2x00_set_field32(®, CSR11_CWMAX, params->cw_max); + rt2x00_set_field32(®, CSR11_CWMIN, cw_min); + rt2x00_set_field32(®, CSR11_CWMAX, cw_max); rt2x00pci_register_write(rt2x00dev, CSR11, reg); } /* - * LED functions. - */ -static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); - rt2x00_set_field32(®, LEDCSR_LINK, - (rt2x00dev->led_mode != LED_MODE_ASUS)); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, - (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY)); - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_LINK, 0); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -/* * Link tuning */ static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev, @@ -593,90 +618,94 @@ static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) * Initialization functions. */ static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word; - rt2x00_desc_read(rxd, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->ring->data_size); - rt2x00_desc_write(rxd, 2, word); + rt2x00_desc_read(priv_rx->desc, 2, &word); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, + entry->queue->data_size); + rt2x00_desc_write(priv_rx->desc, 2, word); - rt2x00_desc_read(rxd, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry->data_dma); - rt2x00_desc_write(rxd, 1, word); + rt2x00_desc_read(priv_rx->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma); + rt2x00_desc_write(priv_rx->desc, 1, word); - rt2x00_desc_read(rxd, 0, &word); + rt2x00_desc_read(priv_rx->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); + rt2x00_desc_write(priv_rx->desc, 0, word); } static void rt2400pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *txd = entry->priv; + struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; u32 word; - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry->data_dma); - rt2x00_desc_write(txd, 1, word); + rt2x00_desc_read(priv_tx->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma); + rt2x00_desc_write(priv_tx->desc, 1, word); - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, entry->ring->data_size); - rt2x00_desc_write(txd, 2, word); + rt2x00_desc_read(priv_tx->desc, 2, &word); + rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, + entry->queue->data_size); + rt2x00_desc_write(priv_tx->desc, 2, word); - rt2x00_desc_read(txd, 0, &word); + rt2x00_desc_read(priv_tx->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); + rt2x00_desc_write(priv_tx->desc, 0, word); } -static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev) +static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) { + struct queue_entry_priv_pci_rx *priv_rx; + struct queue_entry_priv_pci_tx *priv_tx; u32 reg; /* * Initialize registers. */ rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, - rt2x00dev->bcn[1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00_set_field32(®, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size); + rt2x00_set_field32(®, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit); + rt2x00_set_field32(®, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit); + rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); + priv_tx = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); + priv_tx = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); + priv_tx = rt2x00dev->bcn[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - rt2x00dev->bcn[1].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); + priv_tx = rt2x00dev->bcn[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - rt2x00dev->bcn[0].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); + rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); + priv_rx = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - rt2x00dev->rx->data_dma); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_rx->desc_dma); rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); return 0; @@ -795,19 +824,15 @@ continue_csr_init: rt2400pci_bbp_write(rt2x00dev, 30, 0x21); rt2400pci_bbp_write(rt2x00dev, 31, 0x00); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt2400pci_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -859,7 +884,7 @@ static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt2400pci_init_rings(rt2x00dev) || + if (rt2400pci_init_queues(rt2x00dev) || rt2400pci_init_registers(rt2x00dev) || rt2400pci_init_bbp(rt2x00dev)) { ERROR(rt2x00dev, "Register initialization failed.\n"); @@ -871,11 +896,6 @@ static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) */ rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); - /* - * Enable LED - */ - rt2400pci_enable_led(rt2x00dev); - return 0; } @@ -883,11 +903,6 @@ static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - /* - * Disable LED - */ - rt2400pci_disable_led(rt2x00dev); - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); /* @@ -986,10 +1001,10 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1001,19 +1016,19 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal); rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_REGNUM, 5); rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_BUSY, 1); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service); rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_REGNUM, 6); rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_BUSY, 1); rt2x00_desc_write(txd, 3, word); rt2x00_desc_read(txd, 4, &word); - rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, desc->length_low); + rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, txdesc->length_low); rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_REGNUM, 8); rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_BUSY, 1); - rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_REGNUM, 7); rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_BUSY, 1); rt2x00_desc_write(txd, 4, word); @@ -1022,14 +1037,14 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); rt2x00_set_field32(&word, TXD_W0_VALID, 1); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, !!(control->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)); @@ -1040,13 +1055,15 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u32 reg; - if (queue == IEEE80211_TX_QUEUE_BEACON) { + if (queue == RT2X00_BCN_QUEUE_BEACON) { rt2x00pci_register_read(rt2x00dev, CSR14, ®); if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TBCN, 1); rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); rt2x00pci_register_write(rt2x00dev, CSR14, reg); } @@ -1059,56 +1076,62 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == IEEE80211_TX_QUEUE_DATA1)); rt2x00_set_field32(®, TXCSR0_KICK_ATIM, - (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)); + (queue == RT2X00_BCN_QUEUE_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } /* * RX control handlers */ -static void rt2400pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt2400pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word0; u32 word2; + u32 word3; - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 2, &word2); + rt2x00_desc_read(priv_rx->desc, 0, &word0); + rt2x00_desc_read(priv_rx->desc, 2, &word2); + rt2x00_desc_read(priv_rx->desc, 3, &word3); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - desc->flags |= RX_FLAG_FAILED_PLCP_CRC; + rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; /* * Obtain the status about this packet. + * The signal is the PLCP value, and needs to be stripped + * of the preamble bit (0x08). */ - desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - - entry->ring->rt2x00dev->rssi_offset; - desc->ofdm = 0; - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL) & ~0x08; + rxdesc->rssi = rt2x00_get_field32(word2, RXD_W3_RSSI) - + entry->queue->rt2x00dev->rssi_offset; + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; } /* * Interrupt functions. */ -static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) +static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, + const enum ieee80211_tx_queue queue_idx) { - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_entry *entry; - __le32 *txd; + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry *entry; + struct txdone_entry_desc txdesc; u32 word; - int tx_status; - int retry; - while (!rt2x00_ring_empty(ring)) { - entry = rt2x00_get_data_entry_done(ring); - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + priv_tx = entry->priv_data; + rt2x00_desc_read(priv_tx->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) @@ -1117,10 +1140,10 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) /* * Obtain the status about this packet. */ - tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); - retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); + txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT); + txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry); + rt2x00pci_txdone(rt2x00dev, entry, &txdesc); } } @@ -1164,7 +1187,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) * 3 - Atim ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); + rt2400pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); /* * 4 - Priority ring transmit done interrupt. @@ -1272,8 +1295,27 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led mode, for correct led behaviour. */ - rt2x00dev->led_mode = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); +#ifdef CONFIG_RT2400PCI_LEDS + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt2400pci_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt2400pci_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + if (value == LED_MODE_TXRX_ACTIVITY) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt2400pci_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt2400pci_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } +#endif /* CONFIG_RT2400PCI_LEDS */ /* * Detect if this device has an hardware controlled radio. @@ -1343,8 +1385,8 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 1; - spec->num_rates = 4; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -1374,9 +1416,9 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2400pci_probe_hw_mode(rt2x00dev); /* - * This device requires the beacon ring + * This device requires the atim queue */ - __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1389,64 +1431,6 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt2400pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - */ - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * since there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); -} - static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, u32 short_retry, u32 long_retry) { @@ -1481,7 +1465,8 @@ static int rt2400pci_conf_tx(struct ieee80211_hw *hw, /* * Write configuration to register. */ - rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params); + rt2400pci_config_cw(rt2x00dev, + rt2x00dev->tx->cw_min, rt2x00dev->tx->cw_max); return 0; } @@ -1500,12 +1485,58 @@ static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static void rt2400pci_reset_tsf(struct ieee80211_hw *hw) +static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct queue_entry_priv_pci_tx *priv_tx; + struct skb_frame_desc *skbdesc; + u32 reg; + + if (unlikely(!intf->beacon)) + return -ENOBUFS; + priv_tx = intf->beacon->priv_data; - rt2x00pci_register_write(rt2x00dev, CSR16, 0); - rt2x00pci_register_write(rt2x00dev, CSR17, 0); + /* + * Fill in skb descriptor + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data; + skbdesc->data_len = skb->len; + skbdesc->desc = priv_tx->desc; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + + /* + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. + */ + control->queue = RT2X00_BCN_QUEUE_BEACON; + rt2x00lib_write_tx_desc(rt2x00dev, skb, control); + + /* + * Enable beacon generation. + * Write entire beacon with descriptor to register, + * and kick the beacon generator. + */ + memcpy(priv_tx->data, skb->data, skb->len); + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + + return 0; } static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) @@ -1525,15 +1556,14 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt2400pci_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt2400pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2400pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt2400pci_get_tsf, - .reset_tsf = rt2400pci_reset_tsf, - .beacon_update = rt2x00pci_beacon_update, + .beacon_update = rt2400pci_beacon_update, .tx_last_beacon = rt2400pci_tx_last_beacon, }; @@ -1553,19 +1583,50 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .kick_tx_queue = rt2400pci_kick_tx_queue, .fill_rxdone = rt2400pci_fill_rxdone, - .config_mac_addr = rt2400pci_config_mac_addr, - .config_bssid = rt2400pci_config_bssid, - .config_type = rt2400pci_config_type, - .config_preamble = rt2400pci_config_preamble, + .config_filter = rt2400pci_config_filter, + .config_intf = rt2400pci_config_intf, + .config_erp = rt2400pci_config_erp, .config = rt2400pci_config, }; +static const struct data_queue_desc rt2400pci_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_rx), +}; + +static const struct data_queue_desc rt2400pci_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + +static const struct data_queue_desc rt2400pci_queue_bcn = { + .entry_num = BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + +static const struct data_queue_desc rt2400pci_queue_atim = { + .entry_num = ATIM_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + static const struct rt2x00_ops rt2400pci_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 1, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt2400pci_queue_rx, + .tx = &rt2400pci_queue_tx, + .bcn = &rt2400pci_queue_bcn, + .atim = &rt2400pci_queue_atim, .lib = &rt2400pci_rt2x00_ops, .hw = &rt2400pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index 369aac6d033..a5210f9a336 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -899,13 +899,13 @@ * Word2 */ #define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define RXD_W2_SIGNAL FIELD32(0x00ff0000) -#define RXD_W2_RSSI FIELD32(0xff000000) +#define RXD_W2_BBR0 FIELD32(0x00ff0000) +#define RXD_W2_SIGNAL FIELD32(0xff000000) /* * Word3 */ -#define RXD_W3_BBR2 FIELD32(0x000000ff) +#define RXD_W3_RSSI FIELD32(0x000000ff) #define RXD_W3_BBR3 FIELD32(0x0000ff00) #define RXD_W3_BBR4 FIELD32(0x00ff0000) #define RXD_W3_BBR5 FIELD32(0xff000000) @@ -923,13 +923,13 @@ #define RXD_W7_RESERVED FIELD32(0xffffffff) /* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. + * Macro's for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. * NOTE: Logics in rt2400pci for txpower are reversed * compared to the other rt2x00 drivers. A higher txpower * value means that the txpower must be lowered. This is * important when converting the value coming from the - * dscape stack to the rt2400 acceptable value. + * mac80211 stack to the rt2400 acceptable value. */ #define MIN_TXPOWER 31 #define MAX_TXPOWER 62 diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 91e87b53374..5ade097ed45 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -243,57 +243,116 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) #define rt2500pci_rfkill_poll NULL #endif /* CONFIG_RT2500PCI_RFKILL */ -/* - * Configuration handlers. - */ -static void rt2500pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, - __le32 *mac) +#ifdef CONFIG_RT2500PCI_LEDS +static void rt2500pci_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - rt2x00pci_register_multiwrite(rt2x00dev, CSR3, mac, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + u32 reg; + + rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®); + + if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) + rt2x00_set_field32(®, LEDCSR_LINK, enabled); + else if (led->type == LED_TYPE_ACTIVITY) + rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled); + + rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg); } -static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, - __le32 *bssid) +static int rt2500pci_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { - rt2x00pci_register_multiwrite(rt2x00dev, CSR5, bssid, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®); + rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off); + rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg); + + return 0; } +#endif /* CONFIG_RT2500PCI_LEDS */ -static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +/* + * Configuration handlers. + */ +static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) { u32 reg; - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - /* - * Enable beacon config + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. */ - rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, - PREAMBLE + get_duration(IEEE80211_HEADER, 20)); - rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, - rt2x00lib_get_ring(rt2x00dev, - IEEE80211_TX_QUEUE_BEACON) - ->tx_params.cw_min); - rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); + rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); + rt2x00_set_field32(®, RXCSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, RXCSR0_DROP_TODS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, RXCSR0_DROP_MCAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, RXCSR0_DROP_BCAST, 0); + rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); +} - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); +static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) +{ + struct data_queue *queue = + rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + unsigned int bcn_preload; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Enable beacon config + */ + bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20); + rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); + rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); + rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, queue->cw_min); + rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, CSR14_TBCN, 1); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + } + + if (flags & CONFIG_UPDATE_MAC) + rt2x00pci_register_multiwrite(rt2x00dev, CSR3, + conf->mac, sizeof(conf->mac)); + + if (flags & CONFIG_UPDATE_BSSID) + rt2x00pci_register_multiwrite(rt2x00dev, CSR5, + conf->bssid, sizeof(conf->bssid)); } -static void rt2500pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) { int preamble_mask; u32 reg; @@ -301,11 +360,13 @@ static void rt2500pci_config_preamble(struct rt2x00_dev *rt2x00dev, /* * When short preamble is enabled, we should set bit 0x08 */ - preamble_mask = short_preamble << 3; + preamble_mask = erp->short_preamble << 3; rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, ack_timeout); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, ack_consume_time); + rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, + erp->ack_timeout); + rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, + erp->ack_consume_time); rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); @@ -425,6 +486,13 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, u8 r14; u8 r2; + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + rt2x00pci_register_read(rt2x00dev, BBPCSR1, ®); rt2500pci_bbp_read(rt2x00dev, 14, &r14); rt2500pci_bbp_read(rt2x00dev, 2, &r2); @@ -438,15 +506,8 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, BBPCSR1_CCK, 0); rt2x00_set_field32(®, BBPCSR1_OFDM, 0); break; - case ANTENNA_HW_DIVERSITY: - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); rt2x00_set_field32(®, BBPCSR1_CCK, 2); rt2x00_set_field32(®, BBPCSR1_OFDM, 2); @@ -460,15 +521,8 @@ static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, case ANTENNA_A: rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); break; - case ANTENNA_HW_DIVERSITY: - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); break; } @@ -530,8 +584,8 @@ static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt2500pci_config_phymode(rt2x00dev, libconf->basic_rates); @@ -548,34 +602,6 @@ static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, } /* - * LED functions. - */ -static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); - rt2x00_set_field32(®, LEDCSR_LINK, - (rt2x00dev->led_mode != LED_MODE_ASUS)); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, - (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY)); - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_LINK, 0); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -/* * Link tuning */ static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev, @@ -610,9 +636,10 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) /* * To prevent collisions with MAC ASIC on chipsets * up to version C the link tuning should halt after 20 - * seconds. + * seconds while being associated. */ if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D && + rt2x00dev->intf_associated && rt2x00dev->link.count > 20) return; @@ -620,9 +647,12 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) /* * Chipset versions C and lower should directly continue - * to the dynamic CCA tuning. + * to the dynamic CCA tuning. Chipset version D and higher + * should go straight to dynamic CCA tuning when they + * are not associated. */ - if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D) + if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D || + !rt2x00dev->intf_associated) goto dynamic_cca_tune; /* @@ -684,82 +714,84 @@ dynamic_cca_tune: * Initialization functions. */ static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word; - rt2x00_desc_read(rxd, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry->data_dma); - rt2x00_desc_write(rxd, 1, word); + rt2x00_desc_read(priv_rx->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma); + rt2x00_desc_write(priv_rx->desc, 1, word); - rt2x00_desc_read(rxd, 0, &word); + rt2x00_desc_read(priv_rx->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); + rt2x00_desc_write(priv_rx->desc, 0, word); } static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *txd = entry->priv; + struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; u32 word; - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry->data_dma); - rt2x00_desc_write(txd, 1, word); + rt2x00_desc_read(priv_tx->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma); + rt2x00_desc_write(priv_tx->desc, 1, word); - rt2x00_desc_read(txd, 0, &word); + rt2x00_desc_read(priv_tx->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); + rt2x00_desc_write(priv_tx->desc, 0, word); } -static int rt2500pci_init_rings(struct rt2x00_dev *rt2x00dev) +static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) { + struct queue_entry_priv_pci_rx *priv_rx; + struct queue_entry_priv_pci_tx *priv_tx; u32 reg; /* * Initialize registers. */ rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, - rt2x00dev->bcn[1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00_set_field32(®, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size); + rt2x00_set_field32(®, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit); + rt2x00_set_field32(®, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit); + rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); + priv_tx = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); + priv_tx = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); + priv_tx = rt2x00dev->bcn[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - rt2x00dev->bcn[1].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); + priv_tx = rt2x00dev->bcn[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - rt2x00dev->bcn[0].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); + rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); + priv_rx = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - rt2x00dev->rx->data_dma); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_rx->desc_dma); rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); return 0; @@ -947,19 +979,15 @@ continue_csr_init: rt2500pci_bbp_write(rt2x00dev, 61, 0x6d); rt2500pci_bbp_write(rt2x00dev, 62, 0x10); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt2500pci_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -1011,7 +1039,7 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt2500pci_init_rings(rt2x00dev) || + if (rt2500pci_init_queues(rt2x00dev) || rt2500pci_init_registers(rt2x00dev) || rt2500pci_init_bbp(rt2x00dev)) { ERROR(rt2x00dev, "Register initialization failed.\n"); @@ -1023,11 +1051,6 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) */ rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); - /* - * Enable LED - */ - rt2500pci_enable_led(rt2x00dev); - return 0; } @@ -1035,11 +1058,6 @@ static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - /* - * Disable LED - */ - rt2500pci_disable_led(rt2x00dev); - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); /* @@ -1138,10 +1156,10 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1150,36 +1168,36 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ rt2x00_desc_read(txd, 2, &word); rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W2_AIFS, desc->aifs); - rt2x00_set_field32(&word, TXD_W2_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W2_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs); + rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min); + rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal); + rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, txdesc->length_low); + rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 3, word); rt2x00_desc_read(txd, 10, &word); rt2x00_set_field32(&word, TXD_W10_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); + test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); rt2x00_desc_write(txd, 10, word); rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); rt2x00_set_field32(&word, TXD_W0_VALID, 1); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); + test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, !!(control->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)); @@ -1192,13 +1210,15 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u32 reg; - if (queue == IEEE80211_TX_QUEUE_BEACON) { + if (queue == RT2X00_BCN_QUEUE_BEACON) { rt2x00pci_register_read(rt2x00dev, CSR14, ®); if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { + rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); + rt2x00_set_field32(®, CSR14_TBCN, 1); rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); rt2x00pci_register_write(rt2x00dev, CSR14, reg); } @@ -1211,53 +1231,63 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == IEEE80211_TX_QUEUE_DATA1)); rt2x00_set_field32(®, TXCSR0_KICK_ATIM, - (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)); + (queue == RT2X00_BCN_QUEUE_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } /* * RX control handlers */ -static void rt2500pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt2500pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word0; u32 word2; - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 2, &word2); + rt2x00_desc_read(priv_rx->desc, 0, &word0); + rt2x00_desc_read(priv_rx->desc, 2, &word2); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - desc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - - entry->ring->rt2x00dev->rssi_offset; - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; + + /* + * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. + */ + rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); + rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - + entry->queue->rt2x00dev->rssi_offset; + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = 0; + if (rt2x00_get_field32(word0, RXD_W0_OFDM)) + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; } /* * Interrupt functions. */ -static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) +static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, + const enum ieee80211_tx_queue queue_idx) { - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_entry *entry; - __le32 *txd; + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry *entry; + struct txdone_entry_desc txdesc; u32 word; - int tx_status; - int retry; - while (!rt2x00_ring_empty(ring)) { - entry = rt2x00_get_data_entry_done(ring); - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + priv_tx = entry->priv_data; + rt2x00_desc_read(priv_tx->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) @@ -1266,10 +1296,10 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) /* * Obtain the status about this packet. */ - tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); - retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); + txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT); + txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry); + rt2x00pci_txdone(rt2x00dev, entry, &txdesc); } } @@ -1313,7 +1343,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) * 3 - Atim ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); + rt2500pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); /* * 4 - Priority ring transmit done interrupt. @@ -1442,8 +1472,27 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led mode, for correct led behaviour. */ - rt2x00dev->led_mode = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); +#ifdef CONFIG_RT2500PCI_LEDS + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt2500pci_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt2500pci_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + if (value == LED_MODE_TXRX_ACTIVITY) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt2500pci_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt2500pci_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } +#endif /* CONFIG_RT2500PCI_LEDS */ /* * Detect if this device has an hardware controlled radio. @@ -1656,8 +1705,8 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 2; - spec->num_rates = 12; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -1678,9 +1727,9 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); spec->channels = rf_vals_bg_2525e; } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; - spec->num_modes = 3; } } @@ -1705,9 +1754,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2500pci_probe_hw_mode(rt2x00dev); /* - * This device requires the beacon ring + * This device requires the atim queue */ - __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1720,69 +1769,6 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt2500pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, RXCSR0_DROP_MCAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RXCSR0_DROP_BCAST, 0); - rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); -} - static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw, u32 short_retry, u32 long_retry) { @@ -1811,12 +1797,59 @@ static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static void rt2500pci_reset_tsf(struct ieee80211_hw *hw) +static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct queue_entry_priv_pci_tx *priv_tx; + struct skb_frame_desc *skbdesc; + u32 reg; - rt2x00pci_register_write(rt2x00dev, CSR16, 0); - rt2x00pci_register_write(rt2x00dev, CSR17, 0); + if (unlikely(!intf->beacon)) + return -ENOBUFS; + + priv_tx = intf->beacon->priv_data; + + /* + * Fill in skb descriptor + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data; + skbdesc->data_len = skb->len; + skbdesc->desc = priv_tx->desc; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + + /* + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. + */ + control->queue = RT2X00_BCN_QUEUE_BEACON; + rt2x00lib_write_tx_desc(rt2x00dev, skb, control); + + /* + * Enable beacon generation. + * Write entire beacon with descriptor to register, + * and kick the beacon generator. + */ + memcpy(priv_tx->data, skb->data, skb->len); + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + + return 0; } static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) @@ -1836,15 +1869,14 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt2500pci_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt2500pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt2500pci_get_tsf, - .reset_tsf = rt2500pci_reset_tsf, - .beacon_update = rt2x00pci_beacon_update, + .beacon_update = rt2500pci_beacon_update, .tx_last_beacon = rt2500pci_tx_last_beacon, }; @@ -1864,19 +1896,50 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .kick_tx_queue = rt2500pci_kick_tx_queue, .fill_rxdone = rt2500pci_fill_rxdone, - .config_mac_addr = rt2500pci_config_mac_addr, - .config_bssid = rt2500pci_config_bssid, - .config_type = rt2500pci_config_type, - .config_preamble = rt2500pci_config_preamble, + .config_filter = rt2500pci_config_filter, + .config_intf = rt2500pci_config_intf, + .config_erp = rt2500pci_config_erp, .config = rt2500pci_config, }; +static const struct data_queue_desc rt2500pci_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_rx), +}; + +static const struct data_queue_desc rt2500pci_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + +static const struct data_queue_desc rt2500pci_queue_bcn = { + .entry_num = BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + +static const struct data_queue_desc rt2500pci_queue_atim = { + .entry_num = ATIM_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + static const struct rt2x00_ops rt2500pci_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 1, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt2500pci_queue_rx, + .tx = &rt2500pci_queue_tx, + .bcn = &rt2500pci_queue_bcn, + .atim = &rt2500pci_queue_atim, .lib = &rt2500pci_rt2x00_ops, .hw = &rt2500pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 92ba0902d10..13899550465 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -1213,8 +1213,8 @@ #define RXD_W10_DROP FIELD32(0x00000001) /* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. + * Macro's for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. */ #define MIN_TXPOWER 0 #define MAX_TXPOWER 31 diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 638c3d24310..6bb07b33932 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -282,97 +282,136 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -/* - * Configuration handlers. - */ -static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, - __le32 *mac) +#ifdef CONFIG_RT2500USB_LEDS +static void rt2500usb_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (3 * sizeof(__le16))); -} + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + u16 reg; -static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, - __le32 *bssid) -{ - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, bssid, - (3 * sizeof(__le16))); + rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, ®); + + if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) + rt2x00_set_field16(®, MAC_CSR20_LINK, enabled); + else if (led->type == LED_TYPE_ACTIVITY) + rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, enabled); + + rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg); } -static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +static int rt2500usb_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); u16 reg; - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, ®); + rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, *delay_on); + rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, *delay_off); + rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg); - /* - * Enable beacon config - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); - rt2x00_set_field16(®, TXRX_CSR20_OFFSET, - (PREAMBLE + get_duration(IEEE80211_HEADER, 20)) >> 6); - if (type == IEEE80211_IF_TYPE_STA) - rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0); - else - rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2); - rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); + return 0; +} +#endif /* CONFIG_RT2500USB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u16 reg; /* - * Enable synchronisation. + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); - rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, - (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); - rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, tsf_sync); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); + rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); } -static void rt2500usb_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) { + unsigned int bcn_preload; u16 reg; - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->config_work); - return; + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Enable beacon config + */ + bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20); + rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); + rt2x00_set_field16(®, TXRX_CSR20_OFFSET, bcn_preload >> 6); + rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, + 2 * (conf->type != IEEE80211_IF_TYPE_STA)); + rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); + + /* + * Enable synchronisation. + */ + rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); + rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); + + rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); + rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, conf->sync); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); } + if (flags & CONFIG_UPDATE_MAC) + rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac, + (3 * sizeof(__le16))); + + if (flags & CONFIG_UPDATE_BSSID) + rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid, + (3 * sizeof(__le16))); +} + +static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) +{ + u16 reg; + rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, ack_timeout); + rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout); rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, - !!short_preamble); + !!erp->short_preamble); rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); } static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev, - const int phymode, const int basic_rate_mask) { rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask); - - if (phymode == HWMODE_B) { - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040); - } else { - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c); - } } static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, @@ -424,6 +463,13 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, u16 csr5; u16 csr6; + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + rt2500usb_bbp_read(rt2x00dev, 2, &r2); rt2500usb_bbp_read(rt2x00dev, 14, &r14); rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5); @@ -443,14 +489,8 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0); rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2); rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2); @@ -467,14 +507,8 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, case ANTENNA_A: rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); break; } @@ -510,6 +544,8 @@ static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, u16 reg; rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time); + rt2500usb_register_write(rt2x00dev, MAC_CSR11, libconf->sifs); + rt2500usb_register_write(rt2x00dev, MAC_CSR12, libconf->eifs); rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, @@ -518,12 +554,11 @@ static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) - rt2500usb_config_phymode(rt2x00dev, libconf->phymode, - libconf->basic_rates); + rt2500usb_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) rt2500usb_config_channel(rt2x00dev, &libconf->rf, libconf->conf->power_level); @@ -537,36 +572,6 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, } /* - * LED functions. - */ -static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®); - rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70); - rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30); - rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg); - - rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); - rt2x00_set_field16(®, MAC_CSR20_LINK, - (rt2x00dev->led_mode != LED_MODE_ASUS)); - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, - (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY)); - rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); -} - -static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); - rt2x00_set_field16(®, MAC_CSR20_LINK, 0); - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); -} - -/* * Link tuning */ static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev, @@ -626,6 +631,24 @@ static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) u8 low_bound; /* + * Read current r17 value, as well as the sensitivity values + * for the r17 register. + */ + rt2500usb_bbp_read(rt2x00dev, 17, &r17); + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); + up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); + low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER); + + /* + * If we are not associated, we should go straight to the + * dynamic CCA tuning. + */ + if (!rt2x00dev->intf_associated) + goto dynamic_cca_tune; + + /* * Determine the BBP tuning threshold and correctly * set BBP 24, 25 and 61. */ @@ -651,13 +674,6 @@ static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) rt2500usb_bbp_write(rt2x00dev, 61, r61); /* - * Read current r17 value, as well as the sensitivity values - * for the r17 register. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &r17); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); - - /* * A too low RSSI will cause too much false CCA which will * then corrupt the R17 tuning. To remidy this the tuning should * be stopped (While making sure the R17 value will not exceed limits) @@ -692,14 +708,9 @@ static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) * Leave short or middle distance condition, restore r17 * to the dynamic tuning range. */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); - vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); - low_bound = 0x32; - if (rssi >= -77) - up_bound = vgc_bound; - else - up_bound = vgc_bound - (-77 - rssi); + if (rssi < -77) + up_bound -= (-77 - rssi); if (up_bound < low_bound) up_bound = low_bound; @@ -707,7 +718,16 @@ static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) if (r17 > up_bound) { rt2500usb_bbp_write(rt2x00dev, 17, up_bound); rt2x00dev->link.vgc_level = up_bound; - } else if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { + return; + } + +dynamic_cca_tune: + + /* + * R17 is inside the dynamic tuning range, + * start tuning the link based on the false cca counter. + */ + if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { rt2500usb_bbp_write(rt2x00dev, 17, ++r17); rt2x00dev->link.vgc_level = r17; } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { @@ -878,19 +898,15 @@ continue_csr_init: rt2500usb_bbp_write(rt2x00dev, 62, 0x10); rt2500usb_bbp_write(rt2x00dev, 75, 0xff); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt2500usb_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -920,21 +936,11 @@ static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev) return -EIO; } - /* - * Enable LED - */ - rt2500usb_enable_led(rt2x00dev); - return 0; } static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - /* - * Disable LED - */ - rt2500usb_disable_led(rt2x00dev); - rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121); rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121); @@ -1027,10 +1033,10 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1039,31 +1045,31 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ rt2x00_desc_read(txd, 1, &word); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); + test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); @@ -1088,15 +1094,17 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u16 reg; - if (queue != IEEE80211_TX_QUEUE_BEACON) + if (queue != RT2X00_BCN_QUEUE_BEACON) return; rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); /* * Beacon generation will fail initially. @@ -1114,42 +1122,68 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, /* * RX control handlers */ -static void rt2500usb_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt2500usb_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - struct skb_desc *skbdesc = get_skb_desc(entry->skb); - struct urb *urb = entry->priv; - __le32 *rxd = (__le32 *)(entry->skb->data + - (urb->actual_length - entry->ring->desc_size)); + struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *rxd = + (__le32 *)(entry->skb->data + + (priv_rx->urb->actual_length - entry->queue->desc_size)); + unsigned int offset = entry->queue->desc_size + 2; u32 word0; u32 word1; + /* + * Copy descriptor to the available headroom inside the skbuffer. + */ + skb_push(entry->skb, offset); + memcpy(entry->skb->data, rxd, entry->queue->desc_size); + rxd = (__le32 *)entry->skb->data; + + /* + * The descriptor is now aligned to 4 bytes and thus it is + * now safe to read it on all architectures. + */ rt2x00_desc_read(rxd, 0, &word0); rt2x00_desc_read(rxd, 1, &word1); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - desc->flags |= RX_FLAG_FAILED_PLCP_CRC; + rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. + */ + rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - + entry->queue->rt2x00dev->rssi_offset; + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = 0; + if (rt2x00_get_field32(word0, RXD_W0_OFDM)) + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; + + /* + * Adjust the skb memory window to the frame boundaries. */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - - entry->ring->rt2x00dev->rssi_offset; - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + skb_pull(entry->skb, offset); + skb_trim(entry->skb, rxdesc->size); /* * Set descriptor and data pointer. */ - skbdesc->desc = entry->skb->data + desc->size; - skbdesc->desc_len = entry->ring->desc_size; skbdesc->data = entry->skb->data; - skbdesc->data_len = desc->size; + skbdesc->data_len = rxdesc->size; + skbdesc->desc = rxd; + skbdesc->desc_len = entry->queue->desc_size; } /* @@ -1157,10 +1191,10 @@ static void rt2500usb_fill_rxdone(struct data_entry *entry, */ static void rt2500usb_beacondone(struct urb *urb) { - struct data_entry *entry = (struct data_entry *)urb->context; - struct data_ring *ring = entry->ring; + struct queue_entry *entry = (struct queue_entry *)urb->context; + struct queue_entry_priv_usb_bcn *priv_bcn = entry->priv_data; - if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) + if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) return; /* @@ -1169,18 +1203,11 @@ static void rt2500usb_beacondone(struct urb *urb) * Otherwise we should free the sk_buffer, the device * should be doing the rest of the work now. */ - if (ring->index == 1) { - rt2x00_ring_index_done_inc(ring); - entry = rt2x00_get_data_entry(ring); - usb_submit_urb(entry->priv, GFP_ATOMIC); - rt2x00_ring_index_inc(ring); - } else if (ring->index_done == 1) { - entry = rt2x00_get_data_entry_done(ring); - if (entry->skb) { - dev_kfree_skb(entry->skb); - entry->skb = NULL; - } - rt2x00_ring_index_done_inc(ring); + if (priv_bcn->guardian_urb == urb) { + usb_submit_urb(priv_bcn->urb, GFP_ATOMIC); + } else if (priv_bcn->urb == urb) { + dev_kfree_skb(entry->skb); + entry->skb = NULL; } } @@ -1191,6 +1218,7 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) { u16 word; u8 *mac; + u8 bbp; rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); @@ -1245,9 +1273,17 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word); } + /* + * Switch lower vgc bound to current BBP R17 value, + * lower the value a bit for better quality. + */ + rt2500usb_bbp_read(rt2x00dev, 17, &bbp); + bbp -= 6; + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word); if (word == 0xffff) { rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40); + rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); } @@ -1258,6 +1294,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); + } else { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); @@ -1342,8 +1381,27 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led mode, for correct led behaviour. */ - rt2x00dev->led_mode = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); +#ifdef CONFIG_RT2500USB_LEDS + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); + + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt2500usb_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt2500usb_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + if (value == LED_MODE_TXRX_ACTIVITY) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt2500usb_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt2500usb_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } +#endif /* CONFIG_RT2500USB_LEDS */ /* * Check if the BBP tuning should be disabled. @@ -1550,8 +1608,8 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 2; - spec->num_rates = 12; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -1572,9 +1630,9 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); spec->channels = rf_vals_bg_2525e; } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; - spec->num_modes = 3; } } @@ -1599,9 +1657,11 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) rt2500usb_probe_hw_mode(rt2x00dev); /* - * This device requires the beacon ring + * This device requires the atim queue */ - __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1614,125 +1674,58 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt2500usb_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u16 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); - return; - } - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); - rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); -} - static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); - struct skb_desc *desc; - struct data_ring *ring; - struct data_entry *beacon; - struct data_entry *guardian; + struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct queue_entry_priv_usb_bcn *priv_bcn; + struct skb_frame_desc *skbdesc; int pipe = usb_sndbulkpipe(usb_dev, 1); int length; + u16 reg; + + if (unlikely(!intf->beacon)) + return -ENOBUFS; + + priv_bcn = intf->beacon->priv_data; /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. + * Add the descriptor in front of the skb. */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); + skb_push(skb, intf->beacon->queue->desc_size); + memset(skb->data, 0, intf->beacon->queue->desc_size); /* - * Obtain 2 entries, one for the guardian byte, - * the second for the actual beacon. + * Fill in skb descriptor */ - guardian = rt2x00_get_data_entry(ring); - rt2x00_ring_index_inc(ring); - beacon = rt2x00_get_data_entry(ring); + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data + intf->beacon->queue->desc_size; + skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; + skbdesc->desc = skb->data; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; /* - * Add the descriptor in front of the skb. + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); + rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); + rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); /* - * Fill in skb descriptor + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len - ring->desc_size; - desc->desc = skb->data; - desc->data = skb->data + ring->desc_size; - desc->ring = ring; - desc->entry = beacon; - + control->queue = RT2X00_BCN_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* @@ -1742,27 +1735,29 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, */ length = rt2500usb_get_tx_data_len(rt2x00dev, skb); - usb_fill_bulk_urb(beacon->priv, usb_dev, pipe, - skb->data, length, rt2500usb_beacondone, beacon); + usb_fill_bulk_urb(priv_bcn->urb, usb_dev, pipe, + skb->data, length, rt2500usb_beacondone, + intf->beacon); /* * Second we need to create the guardian byte. * We only need a single byte, so lets recycle * the 'flags' field we are not using for beacons. */ - guardian->flags = 0; - usb_fill_bulk_urb(guardian->priv, usb_dev, pipe, - &guardian->flags, 1, rt2500usb_beacondone, guardian); + priv_bcn->guardian_data = 0; + usb_fill_bulk_urb(priv_bcn->guardian_urb, usb_dev, pipe, + &priv_bcn->guardian_data, 1, rt2500usb_beacondone, + intf->beacon); /* * Send out the guardian byte. */ - usb_submit_urb(guardian->priv, GFP_ATOMIC); + usb_submit_urb(priv_bcn->guardian_urb, GFP_ATOMIC); /* * Enable beacon generation. */ - rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + rt2500usb_kick_tx_queue(rt2x00dev, control->queue); return 0; } @@ -1775,7 +1770,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt2500usb_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, @@ -1798,19 +1793,50 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .get_tx_data_len = rt2500usb_get_tx_data_len, .kick_tx_queue = rt2500usb_kick_tx_queue, .fill_rxdone = rt2500usb_fill_rxdone, - .config_mac_addr = rt2500usb_config_mac_addr, - .config_bssid = rt2500usb_config_bssid, - .config_type = rt2500usb_config_type, - .config_preamble = rt2500usb_config_preamble, + .config_filter = rt2500usb_config_filter, + .config_intf = rt2500usb_config_intf, + .config_erp = rt2500usb_config_erp, .config = rt2500usb_config, }; +static const struct data_queue_desc rt2500usb_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_rx), +}; + +static const struct data_queue_desc rt2500usb_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_tx), +}; + +static const struct data_queue_desc rt2500usb_queue_bcn = { + .entry_num = BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_bcn), +}; + +static const struct data_queue_desc rt2500usb_queue_atim = { + .entry_num = ATIM_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_tx), +}; + static const struct rt2x00_ops rt2500usb_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 1, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt2500usb_queue_rx, + .tx = &rt2500usb_queue_tx, + .bcn = &rt2500usb_queue_bcn, + .atim = &rt2500usb_queue_atim, .lib = &rt2500usb_rt2x00_ops, .hw = &rt2500usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 9e0433722e3..a37a068d0c7 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -135,7 +135,7 @@ * Misc MAC_CSR registers. * MAC_CSR9: Timer control. * MAC_CSR10: Slot time. - * MAC_CSR11: IFS. + * MAC_CSR11: SIFS. * MAC_CSR12: EIFS. * MAC_CSR13: Power mode0. * MAC_CSR14: Power mode1. @@ -686,6 +686,7 @@ */ #define EEPROM_BBPTUNE_VGC 0x0034 #define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff) +#define EEPROM_BBPTUNE_VGCLOWER FIELD16(0xff00) /* * EEPROM BBP R17 Tuning. @@ -786,8 +787,8 @@ #define RXD_W3_EIV FIELD32(0xffffffff) /* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. + * Macro's for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. */ #define MIN_TXPOWER 0 #define MAX_TXPOWER 31 diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 6c725422af5..57bdc153952 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -27,23 +27,24 @@ #define RT2X00_H #include <linux/bitops.h> -#include <linux/prefetch.h> #include <linux/skbuff.h> #include <linux/workqueue.h> #include <linux/firmware.h> +#include <linux/leds.h> #include <linux/mutex.h> #include <linux/etherdevice.h> #include <net/mac80211.h> #include "rt2x00debug.h" +#include "rt2x00leds.h" #include "rt2x00reg.h" -#include "rt2x00ring.h" +#include "rt2x00queue.h" /* * Module information. */ -#define DRV_VERSION "2.0.14" +#define DRV_VERSION "2.1.4" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -91,26 +92,6 @@ DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args) /* - * Ring sizes. - * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes. - * DATA_FRAME_SIZE is used for TX, RX, ATIM and PRIO rings. - * MGMT_FRAME_SIZE is used for the BEACON ring. - */ -#define DATA_FRAME_SIZE 2432 -#define MGMT_FRAME_SIZE 256 - -/* - * Number of entries in a packet ring. - * PCI devices only need 1 Beacon entry, - * but USB devices require a second because they - * have to send a Guardian byte first. - */ -#define RX_ENTRIES 12 -#define TX_ENTRIES 12 -#define ATIM_ENTRIES 1 -#define BEACON_ENTRIES 2 - -/* * Standard timing and size defines. * These values should follow the ieee80211 specifications. */ @@ -364,20 +345,22 @@ static inline int rt2x00_update_ant_rssi(struct link *link, int rssi) /* * Interface structure - * Configuration details about the current interface. + * Per interface configuration details, this structure + * is allocated as the private data for ieee80211_vif. */ -struct interface { +struct rt2x00_intf { /* - * Interface identification. The value is assigned - * to us by the 80211 stack, and is used to request - * new beacons. + * All fields within the rt2x00_intf structure + * must be protected with a spinlock. */ - struct ieee80211_vif *id; + spinlock_t lock; /* - * Current working type (IEEE80211_IF_TYPE_*). + * BSS configuration. Copied from the structure + * passed to us through the bss_info_changed() + * callback funtion. */ - int type; + struct ieee80211_bss_conf conf; /* * MAC of the device. @@ -388,42 +371,60 @@ struct interface { * BBSID of the AP to associate with. */ u8 bssid[ETH_ALEN]; -}; -static inline int is_interface_present(struct interface *intf) -{ - return !!intf->id; -} + /* + * Entry in the beacon queue which belongs to + * this interface. Each interface has its own + * dedicated beacon entry. + */ + struct queue_entry *beacon; + + /* + * Actions that needed rescheduling. + */ + unsigned int delayed_flags; +#define DELAYED_UPDATE_BEACON 0x00000001 +#define DELAYED_CONFIG_ERP 0x00000002 +#define DELAYED_LED_ASSOC 0x00000004 +}; -static inline int is_interface_type(struct interface *intf, int type) +static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) { - return intf->type == type; + return (struct rt2x00_intf *)vif->drv_priv; } -/* +/** + * struct hw_mode_spec: Hardware specifications structure + * * Details about the supported modes, rates and channels * of a particular chipset. This is used by rt2x00lib * to build the ieee80211_hw_mode array for mac80211. + * + * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz). + * @supported_rates: Rate types which are supported (CCK, OFDM). + * @num_channels: Number of supported channels. This is used as array size + * for @tx_power_a, @tx_power_bg and @channels. + * channels: Device/chipset specific channel values (See &struct rf_channel). + * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL). + * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL). + * @tx_power_default: Default TX power value to use when either + * @tx_power_a or @tx_power_bg is missing. */ struct hw_mode_spec { - /* - * Number of modes, rates and channels. - */ - int num_modes; - int num_rates; - int num_channels; + unsigned int supported_bands; +#define SUPPORT_BAND_2GHZ 0x00000001 +#define SUPPORT_BAND_5GHZ 0x00000002 + + unsigned int supported_rates; +#define SUPPORT_RATE_CCK 0x00000001 +#define SUPPORT_RATE_OFDM 0x00000002 + + unsigned int num_channels; + const struct rf_channel *channels; - /* - * txpower values. - */ const u8 *tx_power_a; const u8 *tx_power_bg; u8 tx_power_default; - - /* - * Device/chipset specific value. - */ - const struct rf_channel *channels; }; /* @@ -439,10 +440,10 @@ struct rt2x00lib_conf { struct antenna_setup ant; - int phymode; + enum ieee80211_band band; - int basic_rates; - int slot_time; + u32 basic_rates; + u32 slot_time; short sifs; short pifs; @@ -451,6 +452,47 @@ struct rt2x00lib_conf { }; /* + * Configuration structure for erp settings. + */ +struct rt2x00lib_erp { + int short_preamble; + + int ack_timeout; + int ack_consume_time; +}; + +/* + * Configuration structure wrapper around the + * rt2x00 interface configuration handler. + */ +struct rt2x00intf_conf { + /* + * Interface type + */ + enum ieee80211_if_types type; + + /* + * TSF sync value, this is dependant on the operation type. + */ + enum tsf_sync sync; + + /* + * The MAC and BSSID addressess are simple array of bytes, + * these arrays are little endian, so when sending the addressess + * to the drivers, copy the it into a endian-signed variable. + * + * Note that all devices (except rt2500usb) have 32 bits + * register word sizes. This means that whatever variable we + * pass _must_ be a multiple of 32 bits. Otherwise the device + * might not accept what we are sending to it. + * This will also make it easier for the driver to write + * the data to the device. + */ + __le32 mac[2]; + __le32 bssid[2]; +}; + +/* * rt2x00lib callback functions. */ struct rt2x00lib_ops { @@ -464,6 +506,7 @@ struct rt2x00lib_ops { */ int (*probe_hw) (struct rt2x00_dev *rt2x00dev); char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev); + u16 (*get_firmware_crc) (void *data, const size_t len); int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data, const size_t len); @@ -474,12 +517,12 @@ struct rt2x00lib_ops { void (*uninitialize) (struct rt2x00_dev *rt2x00dev); /* - * Ring initialization handlers + * queue initialization handlers */ void (*init_rxentry) (struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); void (*init_txentry) (struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); /* * Radio control handlers. @@ -497,35 +540,40 @@ struct rt2x00lib_ops { */ void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control); int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control); int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, - unsigned int queue); + const unsigned int queue); /* * RX control handlers */ - void (*fill_rxdone) (struct data_entry *entry, - struct rxdata_entry_desc *desc); + void (*fill_rxdone) (struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc); /* * Configuration handlers. */ - void (*config_mac_addr) (struct rt2x00_dev *rt2x00dev, __le32 *mac); - void (*config_bssid) (struct rt2x00_dev *rt2x00dev, __le32 *bssid); - void (*config_type) (struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync); - void (*config_preamble) (struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time); - void (*config) (struct rt2x00_dev *rt2x00dev, const unsigned int flags, - struct rt2x00lib_conf *libconf); + void (*config_filter) (struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags); + void (*config_intf) (struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags); +#define CONFIG_UPDATE_TYPE ( 1 << 1 ) +#define CONFIG_UPDATE_MAC ( 1 << 2 ) +#define CONFIG_UPDATE_BSSID ( 1 << 3 ) + + void (*config_erp) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp); + void (*config) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags); #define CONFIG_UPDATE_PHYMODE ( 1 << 1 ) #define CONFIG_UPDATE_CHANNEL ( 1 << 2 ) #define CONFIG_UPDATE_TXPOWER ( 1 << 3 ) @@ -540,10 +588,14 @@ struct rt2x00lib_ops { */ struct rt2x00_ops { const char *name; - const unsigned int rxd_size; - const unsigned int txd_size; + const unsigned int max_sta_intf; + const unsigned int max_ap_intf; const unsigned int eeprom_size; const unsigned int rf_size; + const struct data_queue_desc *rx; + const struct data_queue_desc *tx; + const struct data_queue_desc *bcn; + const struct data_queue_desc *atim; const struct rt2x00lib_ops *lib; const struct ieee80211_ops *hw; #ifdef CONFIG_RT2X00_LIB_DEBUGFS @@ -569,8 +621,11 @@ enum rt2x00_flags { /* * Driver features */ + DRIVER_SUPPORT_MIXED_INTERFACES, DRIVER_REQUIRE_FIRMWARE, - DRIVER_REQUIRE_BEACON_RING, + DRIVER_REQUIRE_BEACON_GUARD, + DRIVER_REQUIRE_ATIM_QUEUE, + DRIVER_REQUIRE_SCHEDULED, /* * Driver configuration @@ -582,7 +637,6 @@ enum rt2x00_flags { CONFIG_EXTERNAL_LNA_BG, CONFIG_DOUBLE_ANTENNA, CONFIG_DISABLE_LINK_TUNING, - CONFIG_SHORT_PREAMBLE, }; /* @@ -597,8 +651,10 @@ struct rt2x00_dev { * macro's should be used for correct typecasting. */ void *dev; -#define rt2x00dev_pci(__dev) ( (struct pci_dev*)(__dev)->dev ) -#define rt2x00dev_usb(__dev) ( (struct usb_interface*)(__dev)->dev ) +#define rt2x00dev_pci(__dev) ( (struct pci_dev *)(__dev)->dev ) +#define rt2x00dev_usb(__dev) ( (struct usb_interface *)(__dev)->dev ) +#define rt2x00dev_usb_dev(__dev)\ + ( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) ) /* * Callback functions. @@ -609,18 +665,15 @@ struct rt2x00_dev { * IEEE80211 control structure. */ struct ieee80211_hw *hw; - struct ieee80211_hw_mode *hwmodes; - unsigned int curr_hwmode; -#define HWMODE_B 0 -#define HWMODE_G 1 -#define HWMODE_A 2 + struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; + enum ieee80211_band curr_band; /* * rfkill structure for RF state switching support. * This will only be compiled in when required. */ #ifdef CONFIG_RT2X00_LIB_RFKILL -unsigned long rfkill_state; + unsigned long rfkill_state; #define RFKILL_STATE_ALLOCATED 1 #define RFKILL_STATE_REGISTERED 2 struct rfkill *rfkill; @@ -636,6 +689,17 @@ unsigned long rfkill_state; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ /* + * LED structure for changing the LED status + * by mac8011 or the kernel. + */ +#ifdef CONFIG_RT2X00_LIB_LEDS + struct rt2x00_led led_radio; + struct rt2x00_led led_assoc; + struct rt2x00_led led_qual; + u16 led_mcu_reg; +#endif /* CONFIG_RT2X00_LIB_LEDS */ + + /* * Device flags. * In these flags the current status and some * of the device capabilities are stored. @@ -661,11 +725,13 @@ unsigned long rfkill_state; /* * Register pointers - * csr_addr: Base register address. (PCI) - * csr_cache: CSR cache for usb_control_msg. (USB) + * csr.base: CSR base register address. (PCI) + * csr.cache: CSR cache for usb_control_msg. (USB) */ - void __iomem *csr_addr; - void *csr_cache; + union csr { + void __iomem *base; + void *cache; + } csr; /* * Mutex to protect register accesses on USB devices. @@ -687,9 +753,14 @@ unsigned long rfkill_state; unsigned int packet_filter; /* - * Interface configuration. + * Interface details: + * - Open ap interface count. + * - Open sta interface count. + * - Association count. */ - struct interface interface; + unsigned int intf_ap_count; + unsigned int intf_sta_count; + unsigned int intf_associated; /* * Link quality @@ -722,16 +793,6 @@ unsigned long rfkill_state; u16 tx_power; /* - * LED register (for rt61pci & rt73usb). - */ - u16 led_reg; - - /* - * Led mode (LED_MODE_*) - */ - u8 led_mode; - - /* * Rssi <-> Dbm offset */ u8 rssi_offset; @@ -755,19 +816,18 @@ unsigned long rfkill_state; /* * Scheduled work. */ - struct work_struct beacon_work; + struct work_struct intf_work; struct work_struct filter_work; - struct work_struct config_work; /* - * Data ring arrays for RX, TX and Beacon. - * The Beacon array also contains the Atim ring + * Data queue arrays for RX, TX and Beacon. + * The Beacon array also contains the Atim queue * if that is supported by the device. */ - int data_rings; - struct data_ring *rx; - struct data_ring *tx; - struct data_ring *bcn; + int data_queues; + struct data_queue *rx; + struct data_queue *tx; + struct data_queue *bcn; /* * Firmware image. @@ -776,37 +836,6 @@ unsigned long rfkill_state; }; /* - * For-each loop for the ring array. - * All rings have been allocated as a single array, - * this means we can create a very simply loop macro - * that is capable of looping through all rings. - * ring_end(), txring_end() and ring_loop() are helper macro's which - * should not be used directly. Instead the following should be used: - * ring_for_each() - Loops through all rings (RX, TX, Beacon & Atim) - * txring_for_each() - Loops through TX data rings (TX only) - * txringall_for_each() - Loops through all TX rings (TX, Beacon & Atim) - */ -#define ring_end(__dev) \ - &(__dev)->rx[(__dev)->data_rings] - -#define txring_end(__dev) \ - &(__dev)->tx[(__dev)->hw->queues] - -#define ring_loop(__entry, __start, __end) \ - for ((__entry) = (__start); \ - prefetch(&(__entry)[1]), (__entry) != (__end); \ - (__entry) = &(__entry)[1]) - -#define ring_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->rx, ring_end(__dev)) - -#define txring_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->tx, txring_end(__dev)) - -#define txringall_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->tx, ring_end(__dev)) - -/* * Generic RF access. * The RF is being accessed by word index. */ @@ -898,20 +927,43 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) return ((size * 8 * 10) % rate); } -/* - * Library functions. +/** + * rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: mac80211/rt2x00 queue index + * (see &enum ieee80211_tx_queue and &enum rt2x00_bcn_queue). + */ +struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, + const unsigned int queue); + +/** + * rt2x00queue_get_entry - Get queue entry where the given index points to. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @index: Index identifier for obtaining the correct index. + */ +struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, + enum queue_index index); + +/** + * rt2x00queue_index_inc - Index incrementation function + * @queue: Queue (&struct data_queue) to perform the action on. + * @action: Index type (&enum queue_index) to perform the action on. + * + * This function will increase the requested index on the queue, + * it will grab the appropriate locks and handle queue overflow events by + * resetting the index to the start of the queue. */ -struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, - const unsigned int queue); +void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); + /* * Interrupt context handlers. */ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_txdone(struct data_entry *entry, - const int status, const int retry); -void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, - struct rxdata_entry_desc *desc); +void rt2x00lib_txdone(struct queue_entry *entry, + struct txdone_entry_desc *txdesc); +void rt2x00lib_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc); /* * TX descriptor initializer @@ -935,6 +987,10 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); int rt2x00mac_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf); +void rt2x00mac_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mc_list); int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 07adc576db4..a9930a03f45 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -29,64 +29,78 @@ #include "rt2x00.h" #include "rt2x00lib.h" - -/* - * The MAC and BSSID addressess are simple array of bytes, - * these arrays are little endian, so when sending the addressess - * to the drivers, copy the it into a endian-signed variable. - * - * Note that all devices (except rt2500usb) have 32 bits - * register word sizes. This means that whatever variable we - * pass _must_ be a multiple of 32 bits. Otherwise the device - * might not accept what we are sending to it. - * This will also make it easier for the driver to write - * the data to the device. - * - * Also note that when NULL is passed as address the - * we will send 00:00:00:00:00 to the device to clear the address. - * This will prevent the device being confused when it wants - * to ACK frames or consideres itself associated. - */ -void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac) -{ - __le32 reg[2]; - - memset(®, 0, sizeof(reg)); - if (mac) - memcpy(®, mac, ETH_ALEN); - - rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, ®[0]); -} - -void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + enum ieee80211_if_types type, + u8 *mac, u8 *bssid) { - __le32 reg[2]; + struct rt2x00intf_conf conf; + unsigned int flags = 0; - memset(®, 0, sizeof(reg)); - if (bssid) - memcpy(®, bssid, ETH_ALEN); - - rt2x00dev->ops->lib->config_bssid(rt2x00dev, ®[0]); -} - -void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type) -{ - int tsf_sync; + conf.type = type; switch (type) { case IEEE80211_IF_TYPE_IBSS: case IEEE80211_IF_TYPE_AP: - tsf_sync = TSF_SYNC_BEACON; + conf.sync = TSF_SYNC_BEACON; break; case IEEE80211_IF_TYPE_STA: - tsf_sync = TSF_SYNC_INFRA; + conf.sync = TSF_SYNC_INFRA; break; default: - tsf_sync = TSF_SYNC_NONE; + conf.sync = TSF_SYNC_NONE; break; } - rt2x00dev->ops->lib->config_type(rt2x00dev, type, tsf_sync); + /* + * Note that when NULL is passed as address we will send + * 00:00:00:00:00 to the device to clear the address. + * This will prevent the device being confused when it wants + * to ACK frames or consideres itself associated. + */ + memset(&conf.mac, 0, sizeof(conf.mac)); + if (mac) + memcpy(&conf.mac, mac, ETH_ALEN); + + memset(&conf.bssid, 0, sizeof(conf.bssid)); + if (bssid) + memcpy(&conf.bssid, bssid, ETH_ALEN); + + flags |= CONFIG_UPDATE_TYPE; + if (mac || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)) + flags |= CONFIG_UPDATE_MAC; + if (bssid || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)) + flags |= CONFIG_UPDATE_BSSID; + + rt2x00dev->ops->lib->config_intf(rt2x00dev, intf, &conf, flags); +} + +void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct ieee80211_bss_conf *bss_conf) +{ + struct rt2x00lib_erp erp; + + memset(&erp, 0, sizeof(erp)); + + erp.short_preamble = bss_conf->use_short_preamble; + erp.ack_timeout = PLCP + get_duration(ACK_SIZE, 10); + erp.ack_consume_time = SIFS + PLCP + get_duration(ACK_SIZE, 10); + + if (rt2x00dev->hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) + erp.ack_timeout += SHORT_DIFS; + else + erp.ack_timeout += DIFS; + + if (bss_conf->use_short_preamble) { + erp.ack_timeout += SHORT_PREAMBLE; + erp.ack_consume_time += SHORT_PREAMBLE; + } else { + erp.ack_timeout += PREAMBLE; + erp.ack_consume_time += PREAMBLE; + } + + rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp); } void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, @@ -113,7 +127,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * The latter is required since we need to recalibrate the * noise-sensitivity ratio for the new setup. */ - rt2x00dev->ops->lib->config(rt2x00dev, CONFIG_UPDATE_ANTENNA, &libconf); + rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA); rt2x00lib_reset_link_tuner(rt2x00dev); rt2x00dev->link.ant.active.rx = libconf.ant.rx; @@ -123,12 +137,26 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } +static u32 rt2x00lib_get_basic_rates(struct ieee80211_supported_band *band) +{ + const struct rt2x00_rate *rate; + unsigned int i; + u32 mask = 0; + + for (i = 0; i < band->n_bitrates; i++) { + rate = rt2x00_get_rate(band->bitrates[i].hw_value); + if (rate->flags & DEV_RATE_BASIC) + mask |= rate->ratemask; + } + + return mask; +} + void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config) { struct rt2x00lib_conf libconf; - struct ieee80211_hw_mode *mode; - struct ieee80211_rate *rate; + struct ieee80211_supported_band *band; struct antenna_setup *default_ant = &rt2x00dev->default_ant; struct antenna_setup *active_ant = &rt2x00dev->link.ant.active; int flags = 0; @@ -147,9 +175,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, * Check which configuration options have been * updated and should be send to the device. */ - if (rt2x00dev->rx_status.phymode != conf->phymode) + if (rt2x00dev->rx_status.band != conf->channel->band) flags |= CONFIG_UPDATE_PHYMODE; - if (rt2x00dev->rx_status.channel != conf->channel) + if (rt2x00dev->rx_status.freq != conf->channel->center_freq) flags |= CONFIG_UPDATE_CHANNEL; if (rt2x00dev->tx_power != conf->power_level) flags |= CONFIG_UPDATE_TXPOWER; @@ -204,33 +232,15 @@ config: memset(&libconf, 0, sizeof(libconf)); if (flags & CONFIG_UPDATE_PHYMODE) { - switch (conf->phymode) { - case MODE_IEEE80211A: - libconf.phymode = HWMODE_A; - break; - case MODE_IEEE80211B: - libconf.phymode = HWMODE_B; - break; - case MODE_IEEE80211G: - libconf.phymode = HWMODE_G; - break; - default: - ERROR(rt2x00dev, - "Attempt to configure unsupported mode (%d)" - "Defaulting to 802.11b", conf->phymode); - libconf.phymode = HWMODE_B; - } - - mode = &rt2x00dev->hwmodes[libconf.phymode]; - rate = &mode->rates[mode->num_rates - 1]; - - libconf.basic_rates = - DEVICE_GET_RATE_FIELD(rate->val, RATEMASK) & DEV_BASIC_RATEMASK; + band = &rt2x00dev->bands[conf->channel->band]; + + libconf.band = conf->channel->band; + libconf.basic_rates = rt2x00lib_get_basic_rates(band); } if (flags & CONFIG_UPDATE_CHANNEL) { memcpy(&libconf.rf, - &rt2x00dev->spec.channels[conf->channel_val], + &rt2x00dev->spec.channels[conf->channel->hw_value], sizeof(libconf.rf)); } @@ -266,7 +276,7 @@ config: /* * Start configuration. */ - rt2x00dev->ops->lib->config(rt2x00dev, flags, &libconf); + rt2x00dev->ops->lib->config(rt2x00dev, &libconf, flags); /* * Some configuration changes affect the link quality @@ -276,12 +286,11 @@ config: rt2x00lib_reset_link_tuner(rt2x00dev); if (flags & CONFIG_UPDATE_PHYMODE) { - rt2x00dev->curr_hwmode = libconf.phymode; - rt2x00dev->rx_status.phymode = conf->phymode; + rt2x00dev->curr_band = conf->channel->band; + rt2x00dev->rx_status.band = conf->channel->band; } - rt2x00dev->rx_status.freq = conf->freq; - rt2x00dev->rx_status.channel = conf->channel; + rt2x00dev->rx_status.freq = conf->channel->center_freq; rt2x00dev->tx_power = conf->power_level; if (flags & CONFIG_UPDATE_ANTENNA) { diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index b44a9f4b9b7..bfab3b8780d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -33,7 +33,7 @@ #include "rt2x00lib.h" #include "rt2x00dump.h" -#define PRINT_LINE_LEN_MAX 32 +#define MAX_LINE_LENGTH 64 struct rt2x00debug_intf { /* @@ -60,8 +60,9 @@ struct rt2x00debug_intf { * - eeprom offset/value files * - bbp offset/value files * - rf offset/value files - * - frame dump folder + * - queue folder * - frame dump file + * - queue stats file */ struct dentry *driver_folder; struct dentry *driver_entry; @@ -76,8 +77,9 @@ struct rt2x00debug_intf { struct dentry *bbp_val_entry; struct dentry *rf_off_entry; struct dentry *rf_val_entry; - struct dentry *frame_folder; - struct dentry *frame_dump_entry; + struct dentry *queue_folder; + struct dentry *queue_frame_dump_entry; + struct dentry *queue_stats_entry; /* * The frame dump file only allows a single reader, @@ -116,7 +118,7 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; - struct skb_desc *desc = get_skb_desc(skb); + struct skb_frame_desc *desc = get_skb_frame_desc(skb); struct sk_buff *skbcopy; struct rt2x00dump_hdr *dump_hdr; struct timeval timestamp; @@ -147,7 +149,7 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf); dump_hdr->chip_rev = cpu_to_le32(rt2x00dev->chip.rev); dump_hdr->type = cpu_to_le16(desc->frame_type); - dump_hdr->ring_index = desc->ring->queue_idx; + dump_hdr->queue_index = desc->entry->queue->qid; dump_hdr->entry_index = desc->entry->entry_idx; dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec); dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec); @@ -186,7 +188,7 @@ static int rt2x00debug_file_release(struct inode *inode, struct file *file) return 0; } -static int rt2x00debug_open_ring_dump(struct inode *inode, struct file *file) +static int rt2x00debug_open_queue_dump(struct inode *inode, struct file *file) { struct rt2x00debug_intf *intf = inode->i_private; int retval; @@ -203,7 +205,7 @@ static int rt2x00debug_open_ring_dump(struct inode *inode, struct file *file) return 0; } -static int rt2x00debug_release_ring_dump(struct inode *inode, struct file *file) +static int rt2x00debug_release_queue_dump(struct inode *inode, struct file *file) { struct rt2x00debug_intf *intf = inode->i_private; @@ -214,10 +216,10 @@ static int rt2x00debug_release_ring_dump(struct inode *inode, struct file *file) return rt2x00debug_file_release(inode, file); } -static ssize_t rt2x00debug_read_ring_dump(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) +static ssize_t rt2x00debug_read_queue_dump(struct file *file, + char __user *buf, + size_t length, + loff_t *offset) { struct rt2x00debug_intf *intf = file->private_data; struct sk_buff *skb; @@ -248,8 +250,8 @@ exit: return status; } -static unsigned int rt2x00debug_poll_ring_dump(struct file *file, - poll_table *wait) +static unsigned int rt2x00debug_poll_queue_dump(struct file *file, + poll_table *wait) { struct rt2x00debug_intf *intf = file->private_data; @@ -261,12 +263,68 @@ static unsigned int rt2x00debug_poll_ring_dump(struct file *file, return 0; } -static const struct file_operations rt2x00debug_fop_ring_dump = { +static const struct file_operations rt2x00debug_fop_queue_dump = { .owner = THIS_MODULE, - .read = rt2x00debug_read_ring_dump, - .poll = rt2x00debug_poll_ring_dump, - .open = rt2x00debug_open_ring_dump, - .release = rt2x00debug_release_ring_dump, + .read = rt2x00debug_read_queue_dump, + .poll = rt2x00debug_poll_queue_dump, + .open = rt2x00debug_open_queue_dump, + .release = rt2x00debug_release_queue_dump, +}; + +static ssize_t rt2x00debug_read_queue_stats(struct file *file, + char __user *buf, + size_t length, + loff_t *offset) +{ + struct rt2x00debug_intf *intf = file->private_data; + struct data_queue *queue; + unsigned long irqflags; + unsigned int lines = 1 + intf->rt2x00dev->data_queues; + size_t size; + char *data; + char *temp; + + if (*offset) + return 0; + + data = kzalloc(lines * MAX_LINE_LENGTH, GFP_KERNEL); + if (!data) + return -ENOMEM; + + temp = data + + sprintf(data, "qid\tcount\tlimit\tlength\tindex\tdone\tcrypto\n"); + + queue_for_each(intf->rt2x00dev, queue) { + spin_lock_irqsave(&queue->lock, irqflags); + + temp += sprintf(temp, "%d\t%d\t%d\t%d\t%d\t%d\t%d\n", queue->qid, + queue->count, queue->limit, queue->length, + queue->index[Q_INDEX], + queue->index[Q_INDEX_DONE], + queue->index[Q_INDEX_CRYPTO]); + + spin_unlock_irqrestore(&queue->lock, irqflags); + } + + size = strlen(data); + size = min(size, length); + + if (copy_to_user(buf, data, size)) { + kfree(data); + return -EFAULT; + } + + kfree(data); + + *offset += size; + return size; +} + +static const struct file_operations rt2x00debug_fop_queue_stats = { + .owner = THIS_MODULE, + .read = rt2x00debug_read_queue_stats, + .open = rt2x00debug_file_open, + .release = rt2x00debug_file_release, }; #define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ @@ -386,7 +444,7 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name, { char *data; - data = kzalloc(3 * PRINT_LINE_LEN_MAX, GFP_KERNEL); + data = kzalloc(3 * MAX_LINE_LENGTH, GFP_KERNEL); if (!data) return NULL; @@ -409,7 +467,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name, const struct rt2x00debug *debug = intf->debug; char *data; - data = kzalloc(8 * PRINT_LINE_LEN_MAX, GFP_KERNEL); + data = kzalloc(8 * MAX_LINE_LENGTH, GFP_KERNEL); if (!data) return NULL; @@ -496,20 +554,24 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) #undef RT2X00DEBUGFS_CREATE_REGISTER_ENTRY - intf->frame_folder = - debugfs_create_dir("frame", intf->driver_folder); - if (IS_ERR(intf->frame_folder)) + intf->queue_folder = + debugfs_create_dir("queue", intf->driver_folder); + if (IS_ERR(intf->queue_folder)) goto exit; - intf->frame_dump_entry = - debugfs_create_file("dump", S_IRUGO, intf->frame_folder, - intf, &rt2x00debug_fop_ring_dump); - if (IS_ERR(intf->frame_dump_entry)) + intf->queue_frame_dump_entry = + debugfs_create_file("dump", S_IRUGO, intf->queue_folder, + intf, &rt2x00debug_fop_queue_dump); + if (IS_ERR(intf->queue_frame_dump_entry)) goto exit; skb_queue_head_init(&intf->frame_dump_skbqueue); init_waitqueue_head(&intf->frame_dump_waitqueue); + intf->queue_stats_entry = + debugfs_create_file("queue", S_IRUGO, intf->queue_folder, + intf, &rt2x00debug_fop_queue_stats); + return; exit: @@ -528,8 +590,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) skb_queue_purge(&intf->frame_dump_skbqueue); - debugfs_remove(intf->frame_dump_entry); - debugfs_remove(intf->frame_folder); + debugfs_remove(intf->queue_stats_entry); + debugfs_remove(intf->queue_frame_dump_entry); + debugfs_remove(intf->queue_folder); debugfs_remove(intf->rf_val_entry); debugfs_remove(intf->rf_off_entry); debugfs_remove(intf->bbp_val_entry); diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h index d37efbd09c4..c4ce895aa1c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.h +++ b/drivers/net/wireless/rt2x00/rt2x00debug.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e873a39fcce..f8fe7a139a8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -31,34 +31,6 @@ #include "rt2x00dump.h" /* - * Ring handler. - */ -struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) -{ - int beacon = test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); - - /* - * Check if we are requesting a reqular TX ring, - * or if we are requesting a Beacon or Atim ring. - * For Atim rings, we should check if it is supported. - */ - if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) - return &rt2x00dev->tx[queue]; - - if (!rt2x00dev->bcn || !beacon) - return NULL; - - if (queue == IEEE80211_TX_QUEUE_BEACON) - return &rt2x00dev->bcn[0]; - else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) - return &rt2x00dev->bcn[1]; - - return NULL; -} -EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); - -/* * Link tuning handlers */ void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) @@ -113,46 +85,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) } /* - * Ring initialization - */ -static void rt2x00lib_init_rxrings(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring = rt2x00dev->rx; - unsigned int i; - - if (!rt2x00dev->ops->lib->init_rxentry) - return; - - if (ring->data_addr) - memset(ring->data_addr, 0, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) - rt2x00dev->ops->lib->init_rxentry(rt2x00dev, &ring->entry[i]); - - rt2x00_ring_index_clear(ring); -} - -static void rt2x00lib_init_txrings(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - unsigned int i; - - if (!rt2x00dev->ops->lib->init_txentry) - return; - - txringall_for_each(rt2x00dev, ring) { - if (ring->data_addr) - memset(ring->data_addr, 0, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) - rt2x00dev->ops->lib->init_txentry(rt2x00dev, - &ring->entry[i]); - - rt2x00_ring_index_clear(ring); - } -} - -/* * Radio control handlers. */ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) @@ -168,19 +100,21 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) return 0; /* - * Initialize all data rings. + * Initialize all data queues. */ - rt2x00lib_init_rxrings(rt2x00dev); - rt2x00lib_init_txrings(rt2x00dev); + rt2x00queue_init_rx(rt2x00dev); + rt2x00queue_init_tx(rt2x00dev); /* * Enable radio. */ - status = rt2x00dev->ops->lib->set_device_state(rt2x00dev, - STATE_RADIO_ON); + status = + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON); if (status) return status; + rt2x00leds_led_radio(rt2x00dev, true); + __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); /* @@ -204,12 +138,10 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) /* * Stop all scheduled work. */ - if (work_pending(&rt2x00dev->beacon_work)) - cancel_work_sync(&rt2x00dev->beacon_work); + if (work_pending(&rt2x00dev->intf_work)) + cancel_work_sync(&rt2x00dev->intf_work); if (work_pending(&rt2x00dev->filter_work)) cancel_work_sync(&rt2x00dev->filter_work); - if (work_pending(&rt2x00dev->config_work)) - cancel_work_sync(&rt2x00dev->config_work); /* * Stop the TX queues. @@ -225,6 +157,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) * Disable radio. */ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); + rt2x00leds_led_radio(rt2x00dev, false); } void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) @@ -241,7 +174,7 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) * When we are enabling the RX, we should also start the link tuner. */ if (state == STATE_RADIO_RX_ON && - is_interface_present(&rt2x00dev->interface)) + (rt2x00dev->intf_ap_count || rt2x00dev->intf_sta_count)) rt2x00lib_start_link_tuner(rt2x00dev); } @@ -449,6 +382,11 @@ static void rt2x00lib_link_tuner(struct work_struct *work) rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual); /* + * Send a signal to the led to update the led signal strength. + */ + rt2x00leds_led_quality(rt2x00dev, rt2x00dev->link.qual.avg_rssi); + + /* * Evaluate antenna setup, make this the last step since this could * possibly reset some statistics. */ @@ -466,59 +404,76 @@ static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) { struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, filter_work); - unsigned int filter = rt2x00dev->packet_filter; + + rt2x00dev->ops->lib->config_filter(rt2x00dev, rt2x00dev->packet_filter); +} + +static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct rt2x00_dev *rt2x00dev = data; + struct rt2x00_intf *intf = vif_to_intf(vif); + struct sk_buff *skb; + struct ieee80211_tx_control control; + struct ieee80211_bss_conf conf; + int delayed_flags; /* - * Since we had stored the filter inside interface.filter, - * we should now clear that field. Otherwise the driver will - * assume nothing has changed (*total_flags will be compared - * to interface.filter to determine if any action is required). + * Copy all data we need during this action under the protection + * of a spinlock. Otherwise race conditions might occur which results + * into an invalid configuration. */ - rt2x00dev->packet_filter = 0; + spin_lock(&intf->lock); + + memcpy(&conf, &intf->conf, sizeof(conf)); + delayed_flags = intf->delayed_flags; + intf->delayed_flags = 0; - rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw, - filter, &filter, 0, NULL); + spin_unlock(&intf->lock); + + if (delayed_flags & DELAYED_UPDATE_BEACON) { + skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control); + if (skb && rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, + skb, &control)) + dev_kfree_skb(skb); + } + + if (delayed_flags & DELAYED_CONFIG_ERP) + rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf); + + if (delayed_flags & DELAYED_LED_ASSOC) + rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated); } -static void rt2x00lib_configuration_scheduled(struct work_struct *work) +static void rt2x00lib_intf_scheduled(struct work_struct *work) { struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, config_work); - struct ieee80211_bss_conf bss_conf; - - bss_conf.use_short_preamble = - test_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); + container_of(work, struct rt2x00_dev, intf_work); /* - * FIXME: shouldn't invoke it this way because all other contents - * of bss_conf is invalid. + * Iterate over each interface and perform the + * requested configurations. */ - rt2x00mac_bss_info_changed(rt2x00dev->hw, rt2x00dev->interface.id, - &bss_conf, BSS_CHANGED_ERP_PREAMBLE); + ieee80211_iterate_active_interfaces(rt2x00dev->hw, + rt2x00lib_intf_scheduled_iter, + rt2x00dev); } /* * Interrupt context handlers. */ -static void rt2x00lib_beacondone_scheduled(struct work_struct *work) +static void rt2x00lib_beacondone_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) { - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, beacon_work); - struct data_ring *ring = - rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - struct data_entry *entry = rt2x00_get_data_entry(ring); - struct sk_buff *skb; + struct rt2x00_intf *intf = vif_to_intf(vif); - skb = ieee80211_beacon_get(rt2x00dev->hw, - rt2x00dev->interface.id, - &entry->tx_status.control); - if (!skb) + if (vif->type != IEEE80211_IF_TYPE_AP && + vif->type != IEEE80211_IF_TYPE_IBSS) return; - rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb, - &entry->tx_status.control); - - dev_kfree_skb(skb); + spin_lock(&intf->lock); + intf->delayed_flags |= DELAYED_UPDATE_BEACON; + spin_unlock(&intf->lock); } void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) @@ -526,116 +481,140 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) return; - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->beacon_work); + ieee80211_iterate_active_interfaces(rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev); + + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); } EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); -void rt2x00lib_txdone(struct data_entry *entry, - const int status, const int retry) +void rt2x00lib_txdone(struct queue_entry *entry, + struct txdone_entry_desc *txdesc) { - struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; - struct ieee80211_tx_status *tx_status = &entry->tx_status; - struct ieee80211_low_level_stats *stats = &rt2x00dev->low_level_stats; - int success = !!(status == TX_SUCCESS || status == TX_SUCCESS_RETRY); - int fail = !!(status == TX_FAIL_RETRY || status == TX_FAIL_INVALID || - status == TX_FAIL_OTHER); + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc; + struct ieee80211_tx_status tx_status; + int success = !!(txdesc->status == TX_SUCCESS || + txdesc->status == TX_SUCCESS_RETRY); + int fail = !!(txdesc->status == TX_FAIL_RETRY || + txdesc->status == TX_FAIL_INVALID || + txdesc->status == TX_FAIL_OTHER); /* * Update TX statistics. */ - tx_status->flags = 0; - tx_status->ack_signal = 0; - tx_status->excessive_retries = (status == TX_FAIL_RETRY); - tx_status->retry_count = retry; rt2x00dev->link.qual.tx_success += success; - rt2x00dev->link.qual.tx_failed += retry + fail; + rt2x00dev->link.qual.tx_failed += txdesc->retry + fail; + + /* + * Initialize TX status + */ + tx_status.flags = 0; + tx_status.ack_signal = 0; + tx_status.excessive_retries = (txdesc->status == TX_FAIL_RETRY); + tx_status.retry_count = txdesc->retry; + memcpy(&tx_status.control, txdesc->control, sizeof(*txdesc->control)); - if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) { + if (!(tx_status.control.flags & IEEE80211_TXCTL_NO_ACK)) { if (success) - tx_status->flags |= IEEE80211_TX_STATUS_ACK; + tx_status.flags |= IEEE80211_TX_STATUS_ACK; else - stats->dot11ACKFailureCount++; + rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - tx_status->queue_length = entry->ring->stats.limit; - tx_status->queue_number = tx_status->control.queue; + tx_status.queue_length = entry->queue->limit; + tx_status.queue_number = tx_status.control.queue; - if (tx_status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { + if (tx_status.control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { if (success) - stats->dot11RTSSuccessCount++; + rt2x00dev->low_level_stats.dot11RTSSuccessCount++; else - stats->dot11RTSFailureCount++; + rt2x00dev->low_level_stats.dot11RTSFailureCount++; } /* - * Send the tx_status to mac80211 & debugfs. - * mac80211 will clean up the skb structure. + * Send the tx_status to debugfs. Only send the status report + * to mac80211 when the frame originated from there. If this was + * a extra frame coming through a mac80211 library call (RTS/CTS) + * then we should not send the status report back. + * If send to mac80211, mac80211 will clean up the skb structure, + * otherwise we have to do it ourself. */ - get_skb_desc(entry->skb)->frame_type = DUMP_FRAME_TXDONE; + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->frame_type = DUMP_FRAME_TXDONE; + rt2x00debug_dump_frame(rt2x00dev, entry->skb); - ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status); + + if (!(skbdesc->flags & FRAME_DESC_DRIVER_GENERATED)) + ieee80211_tx_status_irqsafe(rt2x00dev->hw, + entry->skb, &tx_status); + else + dev_kfree_skb(entry->skb); entry->skb = NULL; } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); -void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, - struct rxdata_entry_desc *desc) +void rt2x00lib_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; - struct ieee80211_hw_mode *mode; - struct ieee80211_rate *rate; + struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; + const struct rt2x00_rate *rate; unsigned int i; - int val = 0; + int idx = -1; u16 fc; /* * Update RX statistics. */ - mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; - for (i = 0; i < mode->num_rates; i++) { - rate = &mode->rates[i]; + sband = &rt2x00dev->bands[rt2x00dev->curr_band]; + for (i = 0; i < sband->n_bitrates; i++) { + rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - /* - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 0.5kbit/s. - */ - if (!desc->ofdm) - val = DEVICE_GET_RATE_FIELD(rate->val, RATE); - else - val = DEVICE_GET_RATE_FIELD(rate->val, PLCP); - - if (val == desc->signal) { - val = rate->val; + if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->plcp == rxdesc->signal)) || + (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->bitrate == rxdesc->signal))) { + idx = i; break; } } + if (idx < 0) { + WARNING(rt2x00dev, "Frame received with unrecognized signal," + "signal=0x%.2x, plcp=%d.\n", rxdesc->signal, + !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP)); + idx = 0; + } + /* * Only update link status if this is a beacon frame carrying our bssid. */ - hdr = (struct ieee80211_hdr*)skb->data; + hdr = (struct ieee80211_hdr *)entry->skb->data; fc = le16_to_cpu(hdr->frame_control); - if (is_beacon(fc) && desc->my_bss) - rt2x00lib_update_link_stats(&rt2x00dev->link, desc->rssi); + if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS)) + rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi); rt2x00dev->link.qual.rx_success++; - rx_status->rate = val; + rx_status->rate_idx = idx; rx_status->signal = - rt2x00lib_calculate_link_signal(rt2x00dev, desc->rssi); - rx_status->ssi = desc->rssi; - rx_status->flag = desc->flags; + rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi); + rx_status->ssi = rxdesc->rssi; + rx_status->flag = rxdesc->flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; /* - * Send frame to mac80211 & debugfs + * Send frame to mac80211 & debugfs. + * mac80211 will clean up the skb structure. */ - get_skb_desc(skb)->frame_type = DUMP_FRAME_RXDONE; - rt2x00debug_dump_frame(rt2x00dev, skb); - ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status); + get_skb_frame_desc(entry->skb)->frame_type = DUMP_FRAME_RXDONE; + rt2x00debug_dump_frame(rt2x00dev, entry->skb); + ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status); + entry->skb = NULL; } EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); @@ -646,83 +625,69 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, struct ieee80211_tx_control *control) { - struct txdata_entry_desc desc; - struct skb_desc *skbdesc = get_skb_desc(skb); - struct ieee80211_hdr *ieee80211hdr = skbdesc->data; + struct txentry_desc txdesc; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skbdesc->data; + const struct rt2x00_rate *rate; int tx_rate; - int bitrate; int length; int duration; int residual; u16 frame_control; u16 seq_ctrl; - memset(&desc, 0, sizeof(desc)); + memset(&txdesc, 0, sizeof(txdesc)); - desc.cw_min = skbdesc->ring->tx_params.cw_min; - desc.cw_max = skbdesc->ring->tx_params.cw_max; - desc.aifs = skbdesc->ring->tx_params.aifs; - - /* - * Identify queue - */ - if (control->queue < rt2x00dev->hw->queues) - desc.queue = control->queue; - else if (control->queue == IEEE80211_TX_QUEUE_BEACON || - control->queue == IEEE80211_TX_QUEUE_AFTER_BEACON) - desc.queue = QUEUE_MGMT; - else - desc.queue = QUEUE_OTHER; + txdesc.queue = skbdesc->entry->queue->qid; + txdesc.cw_min = skbdesc->entry->queue->cw_min; + txdesc.cw_max = skbdesc->entry->queue->cw_max; + txdesc.aifs = skbdesc->entry->queue->aifs; /* * Read required fields from ieee80211 header. */ - frame_control = le16_to_cpu(ieee80211hdr->frame_control); - seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl); + frame_control = le16_to_cpu(hdr->frame_control); + seq_ctrl = le16_to_cpu(hdr->seq_ctrl); - tx_rate = control->tx_rate; + tx_rate = control->tx_rate->hw_value; /* * Check whether this frame is to be acked */ if (!(control->flags & IEEE80211_TXCTL_NO_ACK)) - __set_bit(ENTRY_TXD_ACK, &desc.flags); + __set_bit(ENTRY_TXD_ACK, &txdesc.flags); /* * Check if this is a RTS/CTS frame */ if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { - __set_bit(ENTRY_TXD_BURST, &desc.flags); + __set_bit(ENTRY_TXD_BURST, &txdesc.flags); if (is_rts_frame(frame_control)) { - __set_bit(ENTRY_TXD_RTS_FRAME, &desc.flags); - __set_bit(ENTRY_TXD_ACK, &desc.flags); + __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags); + __set_bit(ENTRY_TXD_ACK, &txdesc.flags); } else - __clear_bit(ENTRY_TXD_ACK, &desc.flags); + __clear_bit(ENTRY_TXD_ACK, &txdesc.flags); if (control->rts_cts_rate) - tx_rate = control->rts_cts_rate; + tx_rate = control->rts_cts_rate->hw_value; } - /* - * Check for OFDM - */ - if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATEMASK) - __set_bit(ENTRY_TXD_OFDM_RATE, &desc.flags); + rate = rt2x00_get_rate(tx_rate); /* * Check if more fragments are pending */ - if (ieee80211_get_morefrag(ieee80211hdr)) { - __set_bit(ENTRY_TXD_BURST, &desc.flags); - __set_bit(ENTRY_TXD_MORE_FRAG, &desc.flags); + if (ieee80211_get_morefrag(hdr)) { + __set_bit(ENTRY_TXD_BURST, &txdesc.flags); + __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc.flags); } /* * Beacons and probe responses require the tsf timestamp * to be inserted into the frame. */ - if (control->queue == IEEE80211_TX_QUEUE_BEACON || + if (control->queue == RT2X00_BCN_QUEUE_BEACON || is_probe_resp(frame_control)) - __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc.flags); + __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc.flags); /* * Determine with what IFS priority this frame should be send. @@ -730,30 +695,30 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, * or this fragment came after RTS/CTS. */ if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 || - test_bit(ENTRY_TXD_RTS_FRAME, &desc.flags)) - desc.ifs = IFS_SIFS; + test_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags)) + txdesc.ifs = IFS_SIFS; else - desc.ifs = IFS_BACKOFF; + txdesc.ifs = IFS_BACKOFF; /* * PLCP setup * Length calculation depends on OFDM/CCK rate. */ - desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP); - desc.service = 0x04; + txdesc.signal = rate->plcp; + txdesc.service = 0x04; length = skbdesc->data_len + FCS_LEN; - if (test_bit(ENTRY_TXD_OFDM_RATE, &desc.flags)) { - desc.length_high = (length >> 6) & 0x3f; - desc.length_low = length & 0x3f; - } else { - bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE); + if (rate->flags & DEV_RATE_OFDM) { + __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc.flags); + txdesc.length_high = (length >> 6) & 0x3f; + txdesc.length_low = length & 0x3f; + } else { /* * Convert length to microseconds. */ - residual = get_duration_res(length, bitrate); - duration = get_duration(length, bitrate); + residual = get_duration_res(length, rate->bitrate); + duration = get_duration(length, rate->bitrate); if (residual != 0) { duration++; @@ -761,28 +726,27 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * Check if we need to set the Length Extension */ - if (bitrate == 110 && residual <= 30) - desc.service |= 0x80; + if (rate->bitrate == 110 && residual <= 30) + txdesc.service |= 0x80; } - desc.length_high = (duration >> 8) & 0xff; - desc.length_low = duration & 0xff; + txdesc.length_high = (duration >> 8) & 0xff; + txdesc.length_low = duration & 0xff; /* * When preamble is enabled we should set the * preamble bit for the signal. */ - if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE)) - desc.signal |= 0x08; + if (rt2x00_get_rate_preamble(tx_rate)) + txdesc.signal |= 0x08; } - rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, skb, &desc, control); + rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, skb, &txdesc, control); /* - * Update ring entry. + * Update queue entry. */ skbdesc->entry->skb = skb; - memcpy(&skbdesc->entry->tx_status.control, control, sizeof(*control)); /* * The frame has been completely initialized and ready @@ -798,133 +762,167 @@ EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc); /* * Driver initialization handlers. */ +const struct rt2x00_rate rt2x00_supported_rates[12] = { + { + .flags = DEV_RATE_CCK | DEV_RATE_BASIC, + .bitrate = 10, + .ratemask = BIT(0), + .plcp = 0x00, + }, + { + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .bitrate = 20, + .ratemask = BIT(1), + .plcp = 0x01, + }, + { + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .bitrate = 55, + .ratemask = BIT(2), + .plcp = 0x02, + }, + { + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .bitrate = 110, + .ratemask = BIT(3), + .plcp = 0x03, + }, + { + .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .bitrate = 60, + .ratemask = BIT(4), + .plcp = 0x0b, + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 90, + .ratemask = BIT(5), + .plcp = 0x0f, + }, + { + .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .bitrate = 120, + .ratemask = BIT(6), + .plcp = 0x0a, + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 180, + .ratemask = BIT(7), + .plcp = 0x0e, + }, + { + .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .bitrate = 240, + .ratemask = BIT(8), + .plcp = 0x09, + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 360, + .ratemask = BIT(9), + .plcp = 0x0d, + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 480, + .ratemask = BIT(10), + .plcp = 0x08, + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 540, + .ratemask = BIT(11), + .plcp = 0x0c, + }, +}; + static void rt2x00lib_channel(struct ieee80211_channel *entry, const int channel, const int tx_power, const int value) { - entry->chan = channel; - if (channel <= 14) - entry->freq = 2407 + (5 * channel); - else - entry->freq = 5000 + (5 * channel); - entry->val = value; - entry->flag = - IEEE80211_CHAN_W_IBSS | - IEEE80211_CHAN_W_ACTIVE_SCAN | - IEEE80211_CHAN_W_SCAN; - entry->power_level = tx_power; - entry->antenna_max = 0xff; + entry->center_freq = ieee80211_channel_to_frequency(channel); + entry->hw_value = value; + entry->max_power = tx_power; + entry->max_antenna_gain = 0xff; } static void rt2x00lib_rate(struct ieee80211_rate *entry, - const int rate, const int mask, - const int plcp, const int flags) + const u16 index, const struct rt2x00_rate *rate) { - entry->rate = rate; - entry->val = - DEVICE_SET_RATE_FIELD(rate, RATE) | - DEVICE_SET_RATE_FIELD(mask, RATEMASK) | - DEVICE_SET_RATE_FIELD(plcp, PLCP); - entry->flags = flags; - entry->val2 = entry->val; - if (entry->flags & IEEE80211_RATE_PREAMBLE2) - entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE); - entry->min_rssi_ack = 0; - entry->min_rssi_ack_delta = 0; + entry->flags = 0; + entry->bitrate = rate->bitrate; + entry->hw_value = rt2x00_create_rate_hw_value(index, 0); + entry->hw_value_short = entry->hw_value; + + if (rate->flags & DEV_RATE_SHORT_PREAMBLE) { + entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE; + entry->hw_value_short |= rt2x00_create_rate_hw_value(index, 1); + } } static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, struct hw_mode_spec *spec) { struct ieee80211_hw *hw = rt2x00dev->hw; - struct ieee80211_hw_mode *hwmodes; struct ieee80211_channel *channels; struct ieee80211_rate *rates; + unsigned int num_rates; unsigned int i; unsigned char tx_power; - hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL); - if (!hwmodes) - goto exit; + num_rates = 0; + if (spec->supported_rates & SUPPORT_RATE_CCK) + num_rates += 4; + if (spec->supported_rates & SUPPORT_RATE_OFDM) + num_rates += 8; channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL); if (!channels) - goto exit_free_modes; + return -ENOMEM; - rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL); + rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL); if (!rates) goto exit_free_channels; /* * Initialize Rate list. */ - rt2x00lib_rate(&rates[0], 10, DEV_RATEMASK_1MB, - 0x00, IEEE80211_RATE_CCK); - rt2x00lib_rate(&rates[1], 20, DEV_RATEMASK_2MB, - 0x01, IEEE80211_RATE_CCK_2); - rt2x00lib_rate(&rates[2], 55, DEV_RATEMASK_5_5MB, - 0x02, IEEE80211_RATE_CCK_2); - rt2x00lib_rate(&rates[3], 110, DEV_RATEMASK_11MB, - 0x03, IEEE80211_RATE_CCK_2); - - if (spec->num_rates > 4) { - rt2x00lib_rate(&rates[4], 60, DEV_RATEMASK_6MB, - 0x0b, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[5], 90, DEV_RATEMASK_9MB, - 0x0f, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[6], 120, DEV_RATEMASK_12MB, - 0x0a, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[7], 180, DEV_RATEMASK_18MB, - 0x0e, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[8], 240, DEV_RATEMASK_24MB, - 0x09, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[9], 360, DEV_RATEMASK_36MB, - 0x0d, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[10], 480, DEV_RATEMASK_48MB, - 0x08, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[11], 540, DEV_RATEMASK_54MB, - 0x0c, IEEE80211_RATE_OFDM); - } + for (i = 0; i < num_rates; i++) + rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i)); /* * Initialize Channel list. */ for (i = 0; i < spec->num_channels; i++) { - if (spec->channels[i].channel <= 14) - tx_power = spec->tx_power_bg[i]; - else if (spec->tx_power_a) - tx_power = spec->tx_power_a[i]; - else - tx_power = spec->tx_power_default; + if (spec->channels[i].channel <= 14) { + if (spec->tx_power_bg) + tx_power = spec->tx_power_bg[i]; + else + tx_power = spec->tx_power_default; + } else { + if (spec->tx_power_a) + tx_power = spec->tx_power_a[i]; + else + tx_power = spec->tx_power_default; + } rt2x00lib_channel(&channels[i], spec->channels[i].channel, tx_power, i); } /* - * Intitialize 802.11b - * Rates: CCK. - * Channels: OFDM. - */ - if (spec->num_modes > HWMODE_B) { - hwmodes[HWMODE_B].mode = MODE_IEEE80211B; - hwmodes[HWMODE_B].num_channels = 14; - hwmodes[HWMODE_B].num_rates = 4; - hwmodes[HWMODE_B].channels = channels; - hwmodes[HWMODE_B].rates = rates; - } - - /* - * Intitialize 802.11g + * Intitialize 802.11b, 802.11g * Rates: CCK, OFDM. - * Channels: OFDM. - */ - if (spec->num_modes > HWMODE_G) { - hwmodes[HWMODE_G].mode = MODE_IEEE80211G; - hwmodes[HWMODE_G].num_channels = 14; - hwmodes[HWMODE_G].num_rates = spec->num_rates; - hwmodes[HWMODE_G].channels = channels; - hwmodes[HWMODE_G].rates = rates; + * Channels: 2.4 GHz + */ + if (spec->supported_bands & SUPPORT_BAND_2GHZ) { + rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14; + rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates; + rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels; + rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &rt2x00dev->bands[IEEE80211_BAND_2GHZ]; } /* @@ -932,40 +930,21 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, * Rates: OFDM. * Channels: OFDM, UNII, HiperLAN2. */ - if (spec->num_modes > HWMODE_A) { - hwmodes[HWMODE_A].mode = MODE_IEEE80211A; - hwmodes[HWMODE_A].num_channels = spec->num_channels - 14; - hwmodes[HWMODE_A].num_rates = spec->num_rates - 4; - hwmodes[HWMODE_A].channels = &channels[14]; - hwmodes[HWMODE_A].rates = &rates[4]; + if (spec->supported_bands & SUPPORT_BAND_5GHZ) { + rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels = + spec->num_channels - 14; + rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates = + num_rates - 4; + rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14]; + rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4]; + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &rt2x00dev->bands[IEEE80211_BAND_5GHZ]; } - if (spec->num_modes > HWMODE_G && - ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G])) - goto exit_free_rates; - - if (spec->num_modes > HWMODE_B && - ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B])) - goto exit_free_rates; - - if (spec->num_modes > HWMODE_A && - ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A])) - goto exit_free_rates; - - rt2x00dev->hwmodes = hwmodes; - return 0; -exit_free_rates: - kfree(rates); - -exit_free_channels: + exit_free_channels: kfree(channels); - -exit_free_modes: - kfree(hwmodes); - -exit: ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n"); return -ENOMEM; } @@ -975,11 +954,11 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags)) ieee80211_unregister_hw(rt2x00dev->hw); - if (likely(rt2x00dev->hwmodes)) { - kfree(rt2x00dev->hwmodes->channels); - kfree(rt2x00dev->hwmodes->rates); - kfree(rt2x00dev->hwmodes); - rt2x00dev->hwmodes = NULL; + if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) { + kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels); + kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates); + rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL; + rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL; } } @@ -1012,86 +991,6 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialization/uninitialization handlers. */ -static int rt2x00lib_alloc_entries(struct data_ring *ring, - const u16 max_entries, const u16 data_size, - const u16 desc_size) -{ - struct data_entry *entry; - unsigned int i; - - ring->stats.limit = max_entries; - ring->data_size = data_size; - ring->desc_size = desc_size; - - /* - * Allocate all ring entries. - */ - entry = kzalloc(ring->stats.limit * sizeof(*entry), GFP_KERNEL); - if (!entry) - return -ENOMEM; - - for (i = 0; i < ring->stats.limit; i++) { - entry[i].flags = 0; - entry[i].ring = ring; - entry[i].skb = NULL; - entry[i].entry_idx = i; - } - - ring->entry = entry; - - return 0; -} - -static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - /* - * Allocate the RX ring. - */ - if (rt2x00lib_alloc_entries(rt2x00dev->rx, RX_ENTRIES, DATA_FRAME_SIZE, - rt2x00dev->ops->rxd_size)) - return -ENOMEM; - - /* - * First allocate the TX rings. - */ - txring_for_each(rt2x00dev, ring) { - if (rt2x00lib_alloc_entries(ring, TX_ENTRIES, DATA_FRAME_SIZE, - rt2x00dev->ops->txd_size)) - return -ENOMEM; - } - - if (!test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) - return 0; - - /* - * Allocate the BEACON ring. - */ - if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[0], BEACON_ENTRIES, - MGMT_FRAME_SIZE, rt2x00dev->ops->txd_size)) - return -ENOMEM; - - /* - * Allocate the Atim ring. - */ - if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[1], ATIM_ENTRIES, - DATA_FRAME_SIZE, rt2x00dev->ops->txd_size)) - return -ENOMEM; - - return 0; -} - -static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - ring_for_each(rt2x00dev, ring) { - kfree(ring->entry); - ring->entry = NULL; - } -} - static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) { if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) @@ -1108,9 +1007,9 @@ static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) rt2x00dev->ops->lib->uninitialize(rt2x00dev); /* - * Free allocated ring entries. + * Free allocated queue entries. */ - rt2x00lib_free_ring_entries(rt2x00dev); + rt2x00queue_uninitialize(rt2x00dev); } static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) @@ -1121,13 +1020,11 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) return 0; /* - * Allocate all ring entries. + * Allocate all queue entries. */ - status = rt2x00lib_alloc_ring_entries(rt2x00dev); - if (status) { - ERROR(rt2x00dev, "Ring entries allocation failed.\n"); + status = rt2x00queue_initialize(rt2x00dev); + if (status) return status; - } /* * Initialize the device. @@ -1146,7 +1043,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) return 0; exit: - rt2x00lib_free_ring_entries(rt2x00dev); + rt2x00lib_uninitialize(rt2x00dev); return status; } @@ -1162,11 +1059,9 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) * If this is the first interface which is added, * we should load the firmware now. */ - if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) { - retval = rt2x00lib_load_firmware(rt2x00dev); - if (retval) - return retval; - } + retval = rt2x00lib_load_firmware(rt2x00dev); + if (retval) + return retval; /* * Initialize the device. @@ -1184,6 +1079,10 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) return retval; } + rt2x00dev->intf_ap_count = 0; + rt2x00dev->intf_sta_count = 0; + rt2x00dev->intf_associated = 0; + __set_bit(DEVICE_STARTED, &rt2x00dev->flags); return 0; @@ -1200,74 +1099,25 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) */ rt2x00lib_disable_radio(rt2x00dev); + rt2x00dev->intf_ap_count = 0; + rt2x00dev->intf_sta_count = 0; + rt2x00dev->intf_associated = 0; + __clear_bit(DEVICE_STARTED, &rt2x00dev->flags); } /* * driver allocation handlers. */ -static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) +int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; - unsigned int index; - - /* - * We need the following rings: - * RX: 1 - * TX: hw->queues - * Beacon: 1 (if required) - * Atim: 1 (if required) - */ - rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues + - (2 * test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)); - - ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL); - if (!ring) { - ERROR(rt2x00dev, "Ring allocation failed.\n"); - return -ENOMEM; - } - - /* - * Initialize pointers - */ - rt2x00dev->rx = ring; - rt2x00dev->tx = &rt2x00dev->rx[1]; - if (test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) - rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues]; + int retval = -ENOMEM; /* - * Initialize ring parameters. - * RX: queue_idx = 0 - * TX: queue_idx = IEEE80211_TX_QUEUE_DATA0 + index - * TX: cw_min: 2^5 = 32. - * TX: cw_max: 2^10 = 1024. + * Make room for rt2x00_intf inside the per-interface + * structure ieee80211_vif. */ - rt2x00dev->rx->rt2x00dev = rt2x00dev; - rt2x00dev->rx->queue_idx = 0; - - index = IEEE80211_TX_QUEUE_DATA0; - txring_for_each(rt2x00dev, ring) { - ring->rt2x00dev = rt2x00dev; - ring->queue_idx = index++; - ring->tx_params.aifs = 2; - ring->tx_params.cw_min = 5; - ring->tx_params.cw_max = 10; - } - - return 0; -} - -static void rt2x00lib_free_rings(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rx); - rt2x00dev->rx = NULL; - rt2x00dev->tx = NULL; - rt2x00dev->bcn = NULL; -} - -int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) -{ - int retval = -ENOMEM; + rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf); /* * Let the driver probe the device to detect the capabilities. @@ -1281,20 +1131,14 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Initialize configuration work. */ - INIT_WORK(&rt2x00dev->beacon_work, rt2x00lib_beacondone_scheduled); + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); - INIT_WORK(&rt2x00dev->config_work, rt2x00lib_configuration_scheduled); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); /* - * Reset current working type. - */ - rt2x00dev->interface.type = IEEE80211_IF_TYPE_INVALID; - - /* - * Allocate ring array. + * Allocate queue array. */ - retval = rt2x00lib_alloc_rings(rt2x00dev); + retval = rt2x00queue_allocate(rt2x00dev); if (retval) goto exit; @@ -1310,6 +1154,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Register extra components. */ + rt2x00leds_register(rt2x00dev); rt2x00rfkill_allocate(rt2x00dev); rt2x00debug_register(rt2x00dev); @@ -1343,6 +1188,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) */ rt2x00debug_deregister(rt2x00dev); rt2x00rfkill_free(rt2x00dev); + rt2x00leds_unregister(rt2x00dev); /* * Free ieee80211_hw memory. @@ -1355,9 +1201,9 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) rt2x00lib_free_firmware(rt2x00dev); /* - * Free ring structures. + * Free queue structures. */ - rt2x00lib_free_rings(rt2x00dev); + rt2x00queue_free(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); @@ -1388,6 +1234,7 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) /* * Suspend/disable extra components. */ + rt2x00leds_suspend(rt2x00dev); rt2x00rfkill_suspend(rt2x00dev); rt2x00debug_deregister(rt2x00dev); @@ -1412,9 +1259,30 @@ exit: } EXPORT_SYMBOL_GPL(rt2x00lib_suspend); +static void rt2x00lib_resume_intf(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct rt2x00_dev *rt2x00dev = data; + struct rt2x00_intf *intf = vif_to_intf(vif); + + spin_lock(&intf->lock); + + rt2x00lib_config_intf(rt2x00dev, intf, + vif->type, intf->mac, intf->bssid); + + + /* + * Master or Ad-hoc mode require a new beacon update. + */ + if (vif->type == IEEE80211_IF_TYPE_AP || + vif->type == IEEE80211_IF_TYPE_IBSS) + intf->delayed_flags |= DELAYED_UPDATE_BEACON; + + spin_unlock(&intf->lock); +} + int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) { - struct interface *intf = &rt2x00dev->interface; int retval; NOTICE(rt2x00dev, "Waking up.\n"); @@ -1424,6 +1292,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) */ rt2x00debug_register(rt2x00dev); rt2x00rfkill_resume(rt2x00dev); + rt2x00leds_resume(rt2x00dev); /* * Only continue if mac80211 had open interfaces. @@ -1445,9 +1314,12 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->hw->conf.radio_enabled) rt2x00lib_disable_radio(rt2x00dev); - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); - rt2x00lib_config_type(rt2x00dev, intf->type); + /* + * Iterator over each active interface to + * reconfigure the hardware. + */ + ieee80211_iterate_active_interfaces(rt2x00dev->hw, + rt2x00lib_resume_intf, rt2x00dev); /* * We are ready again to receive requests from mac80211. @@ -1463,12 +1335,11 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) ieee80211_start_queues(rt2x00dev->hw); /* - * When in Master or Ad-hoc mode, - * restart Beacon transmitting by faking a beacondone event. + * During interface iteration we might have changed the + * delayed_flags, time to handles the event by calling + * the work handler directly. */ - if (intf->type == IEEE80211_IF_TYPE_AP || - intf->type == IEEE80211_IF_TYPE_IBSS) - rt2x00lib_beacondone(rt2x00dev); + rt2x00lib_intf_scheduled(&rt2x00dev->intf_work); return 0; diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h index 99f3f367adc..7169c222a48 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ b/drivers/net/wireless/rt2x00/rt2x00dump.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -93,8 +93,8 @@ enum rt2x00_dump_type { * @chip_rf: RF chipset * @chip_rev: Chipset revision * @type: The frame type (&rt2x00_dump_type) - * @ring_index: The index number of the data ring. - * @entry_index: The index number of the entry inside the data ring. + * @queue_index: The index number of the data queue. + * @entry_index: The index number of the entry inside the data queue. * @timestamp_sec: Timestamp - seconds * @timestamp_usec: Timestamp - microseconds */ @@ -111,7 +111,7 @@ struct rt2x00dump_hdr { __le32 chip_rev; __le16 type; - __u8 ring_index; + __u8 queue_index; __u8 entry_index; __le32 timestamp_sec; diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index 0a475e4e244..b971bc6e7ee 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -23,7 +23,6 @@ Abstract: rt2x00 firmware loading routines. */ -#include <linux/crc-itu-t.h> #include <linux/kernel.h> #include <linux/module.h> @@ -37,7 +36,6 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) char *fw_name; int retval; u16 crc; - u16 tmp; /* * Read correct firmware from harddisk. @@ -63,18 +61,9 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) return -ENOENT; } - /* - * Validate the firmware using 16 bit CRC. - * The last 2 bytes of the firmware are the CRC - * so substract those 2 bytes from the CRC checksum, - * and set those 2 bytes to 0 when calculating CRC. - */ - tmp = 0; - crc = crc_itu_t(0, fw->data, fw->size - 2); - crc = crc_itu_t(crc, (u8 *)&tmp, 2); - + crc = rt2x00dev->ops->lib->get_firmware_crc(fw->data, fw->size); if (crc != (fw->data[fw->size - 2] << 8 | fw->data[fw->size - 1])) { - ERROR(rt2x00dev, "Firmware CRC error.\n"); + ERROR(rt2x00dev, "Firmware checksum error.\n"); retval = -ENOENT; goto exit; } @@ -96,6 +85,9 @@ int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) { int retval; + if (!test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) + return 0; + if (!rt2x00dev->fw) { retval = rt2x00lib_request_firmware(rt2x00dev); if (retval) @@ -116,4 +108,3 @@ void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) release_firmware(rt2x00dev->fw); rt2x00dev->fw = NULL; } - diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c new file mode 100644 index 00000000000..40c1f5c1b80 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -0,0 +1,219 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 led specific routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi) +{ + struct rt2x00_led *led = &rt2x00dev->led_qual; + unsigned int brightness; + + if ((led->type != LED_TYPE_QUALITY) || !(led->flags & LED_REGISTERED)) + return; + + /* + * Led handling requires a positive value for the rssi, + * to do that correctly we need to add the correction. + */ + rssi += rt2x00dev->rssi_offset; + + /* + * Get the rssi level, this is used to convert the rssi + * to a LED value inside the range LED_OFF - LED_FULL. + */ + if (rssi <= 30) + rssi = 0; + else if (rssi <= 39) + rssi = 1; + else if (rssi <= 49) + rssi = 2; + else if (rssi <= 53) + rssi = 3; + else if (rssi <= 63) + rssi = 4; + else + rssi = 5; + + /* + * Note that we must _not_ send LED_OFF since the driver + * is going to calculate the value and might use it in a + * division. + */ + brightness = ((LED_FULL / 6) * rssi) + 1; + if (brightness != led->led_dev.brightness) { + led->led_dev.brightness_set(&led->led_dev, brightness); + led->led_dev.brightness = brightness; + } +} + +void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) +{ + struct rt2x00_led *led = &rt2x00dev->led_assoc; + unsigned int brightness; + + if ((led->type != LED_TYPE_ASSOC) || !(led->flags & LED_REGISTERED)) + return; + + brightness = enabled ? LED_FULL : LED_OFF; + if (brightness != led->led_dev.brightness) { + led->led_dev.brightness_set(&led->led_dev, brightness); + led->led_dev.brightness = brightness; + } +} + +void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled) +{ + struct rt2x00_led *led = &rt2x00dev->led_radio; + unsigned int brightness; + + if ((led->type != LED_TYPE_RADIO) || !(led->flags & LED_REGISTERED)) + return; + + brightness = enabled ? LED_FULL : LED_OFF; + if (brightness != led->led_dev.brightness) { + led->led_dev.brightness_set(&led->led_dev, brightness); + led->led_dev.brightness = brightness; + } +} + +static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + const char *name) +{ + struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); + int retval; + + led->led_dev.name = name; + + retval = led_classdev_register(device, &led->led_dev); + if (retval) { + ERROR(rt2x00dev, "Failed to register led handler.\n"); + return retval; + } + + led->flags |= LED_REGISTERED; + + return 0; +} + +void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) +{ + char dev_name[16]; + char name[32]; + int retval; + unsigned long on_period; + unsigned long off_period; + + snprintf(dev_name, sizeof(dev_name), "%s-%s", + rt2x00dev->ops->name, wiphy_name(rt2x00dev->hw->wiphy)); + + if (rt2x00dev->led_radio.flags & LED_INITIALIZED) { + snprintf(name, sizeof(name), "%s:radio", dev_name); + + retval = rt2x00leds_register_led(rt2x00dev, + &rt2x00dev->led_radio, + name); + if (retval) + goto exit_fail; + } + + if (rt2x00dev->led_assoc.flags & LED_INITIALIZED) { + snprintf(name, sizeof(name), "%s:assoc", dev_name); + + retval = rt2x00leds_register_led(rt2x00dev, + &rt2x00dev->led_assoc, + name); + if (retval) + goto exit_fail; + } + + if (rt2x00dev->led_qual.flags & LED_INITIALIZED) { + snprintf(name, sizeof(name), "%s:quality", dev_name); + + retval = rt2x00leds_register_led(rt2x00dev, + &rt2x00dev->led_qual, + name); + if (retval) + goto exit_fail; + } + + /* + * Initialize blink time to default value: + * On period: 70ms + * Off period: 30ms + */ + if (rt2x00dev->led_radio.led_dev.blink_set) { + on_period = 70; + off_period = 30; + rt2x00dev->led_radio.led_dev.blink_set( + &rt2x00dev->led_radio.led_dev, &on_period, &off_period); + } + + return; + +exit_fail: + rt2x00leds_unregister(rt2x00dev); +} + +static void rt2x00leds_unregister_led(struct rt2x00_led *led) +{ + led_classdev_unregister(&led->led_dev); + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->flags &= ~LED_REGISTERED; +} + +void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->led_qual.flags & LED_REGISTERED) + rt2x00leds_unregister_led(&rt2x00dev->led_qual); + if (rt2x00dev->led_assoc.flags & LED_REGISTERED) + rt2x00leds_unregister_led(&rt2x00dev->led_assoc); + if (rt2x00dev->led_radio.flags & LED_REGISTERED) + rt2x00leds_unregister_led(&rt2x00dev->led_radio); +} + +void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->led_qual.flags & LED_REGISTERED) + led_classdev_suspend(&rt2x00dev->led_qual.led_dev); + if (rt2x00dev->led_assoc.flags & LED_REGISTERED) + led_classdev_suspend(&rt2x00dev->led_assoc.led_dev); + if (rt2x00dev->led_radio.flags & LED_REGISTERED) + led_classdev_suspend(&rt2x00dev->led_radio.led_dev); +} + +void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->led_radio.flags & LED_REGISTERED) + led_classdev_resume(&rt2x00dev->led_radio.led_dev); + if (rt2x00dev->led_assoc.flags & LED_REGISTERED) + led_classdev_resume(&rt2x00dev->led_assoc.led_dev); + if (rt2x00dev->led_qual.flags & LED_REGISTERED) + led_classdev_resume(&rt2x00dev->led_qual.led_dev); +} diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h new file mode 100644 index 00000000000..9df4a49bdca --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00leds.h @@ -0,0 +1,50 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 led datastructures and routines + */ + +#ifndef RT2X00LEDS_H +#define RT2X00LEDS_H + +enum led_type { + LED_TYPE_RADIO, + LED_TYPE_ASSOC, + LED_TYPE_ACTIVITY, + LED_TYPE_QUALITY, +}; + +#ifdef CONFIG_RT2X00_LIB_LEDS + +struct rt2x00_led { + struct rt2x00_dev *rt2x00dev; + struct led_classdev led_dev; + + enum led_type type; + unsigned int flags; +#define LED_INITIALIZED ( 1 << 0 ) +#define LED_REGISTERED ( 1 << 1 ) +}; + +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +#endif /* RT2X00LEDS_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index ce58c654ade..5be32fffc74 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -34,6 +34,40 @@ #define RFKILL_POLL_INTERVAL ( 1000 ) /* + * rt2x00_rate: Per rate device information + */ +struct rt2x00_rate { + unsigned short flags; +#define DEV_RATE_CCK 0x0001 +#define DEV_RATE_OFDM 0x0002 +#define DEV_RATE_SHORT_PREAMBLE 0x0004 +#define DEV_RATE_BASIC 0x0008 + + unsigned short bitrate; /* In 100kbit/s */ + unsigned short ratemask; + + unsigned short plcp; +}; + +extern const struct rt2x00_rate rt2x00_supported_rates[12]; + +static inline u16 rt2x00_create_rate_hw_value(const u16 index, + const u16 short_preamble) +{ + return (short_preamble << 8) | (index & 0xff); +} + +static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value) +{ + return &rt2x00_supported_rates[hw_value & 0xff]; +} + +static inline int rt2x00_get_rate_preamble(const u16 hw_value) +{ + return (hw_value & 0xff00); +} + +/* * Radio control handlers. */ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev); @@ -50,15 +84,29 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev); /* * Configuration handlers. */ -void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac); -void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid); -void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type); +void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + enum ieee80211_if_types type, + u8 *mac, u8 *bssid); +void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct ieee80211_bss_conf *conf); void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, enum antenna rx, enum antenna tx); void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config); /* + * Queue handlers. + */ +void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev); +void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev); +int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev); +void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev); +int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev); +void rt2x00queue_free(struct rt2x00_dev *rt2x00dev); + +/* * Firmware handlers. */ #ifdef CONFIG_RT2X00_LIB_FIRMWARE @@ -132,4 +180,48 @@ static inline void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev) } #endif /* CONFIG_RT2X00_LIB_RFKILL */ +/* + * LED handlers + */ +#ifdef CONFIG_RT2X00_LIB_LEDS +void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi); +void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled); +void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled); +void rt2x00leds_register(struct rt2x00_dev *rt2x00dev); +void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev); +void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev); +void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev); +#else +static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, + int rssi) +{ +} + +static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, + bool enabled) +{ +} + +static inline void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, + bool enabled) +{ +} + +static inline void rt2x00leds_register(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2X00_LIB_LEDS */ + #endif /* RT2X00LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index e3f15e518c7..c206b509207 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -30,10 +30,11 @@ #include "rt2x00lib.h" static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, + struct data_queue *queue, struct sk_buff *frag_skb, struct ieee80211_tx_control *control) { + struct skb_frame_desc *skbdesc; struct sk_buff *skb; int size; @@ -52,15 +53,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, skb_put(skb, size); if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id, + ieee80211_ctstoself_get(rt2x00dev->hw, control->vif, frag_skb->data, frag_skb->len, control, (struct ieee80211_cts *)(skb->data)); else - ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id, + ieee80211_rts_get(rt2x00dev->hw, control->vif, frag_skb->data, frag_skb->len, control, (struct ieee80211_rts *)(skb->data)); - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { + /* + * Initialize skb descriptor + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) { WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } @@ -73,7 +81,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, { struct rt2x00_dev *rt2x00dev = hw->priv; struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; - struct data_ring *ring; + struct data_queue *queue; + struct skb_frame_desc *skbdesc; u16 frame_control; /* @@ -88,10 +97,14 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, } /* - * Determine which ring to put packet on. + * Determine which queue to put packet on. */ - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - if (unlikely(!ring)) { + if (control->flags & IEEE80211_TXCTL_SEND_AFTER_DTIM && + test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) + queue = rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + else + queue = rt2x00queue_get_queue(rt2x00dev, control->queue); + if (unlikely(!queue)) { ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" "Please file bug report to %s.\n", @@ -110,23 +123,29 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) && (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS | IEEE80211_TXCTL_USE_CTS_PROTECT))) { - if (rt2x00_ring_free(ring) <= 1) { + if (rt2x00queue_available(queue) <= 1) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; } - if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control)) { + if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb, control)) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; } } - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { + /* + * Initialize skb descriptor + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; } - if (rt2x00_ring_full(ring)) + if (rt2x00queue_full(queue)) ieee80211_stop_queue(rt2x00dev->hw, control->queue); if (rt2x00dev->ops->lib->kick_tx_queue) @@ -162,27 +181,67 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - - /* FIXME: Beaconing is broken in rt2x00. */ - if (conf->type == IEEE80211_IF_TYPE_IBSS || - conf->type == IEEE80211_IF_TYPE_AP) { - ERROR(rt2x00dev, - "rt2x00 does not support Adhoc or Master mode"); - return -EOPNOTSUPP; - } + struct rt2x00_intf *intf = vif_to_intf(conf->vif); + struct data_queue *queue = + rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + struct queue_entry *entry = NULL; + unsigned int i; /* - * Don't allow interfaces to be added while - * either the device has disappeared or when - * another interface is already present. + * Don't allow interfaces to be added + * the device has disappeared. */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - is_interface_present(intf)) + !test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + return -ENODEV; + + /* + * When we don't support mixed interfaces (a combination + * of sta and ap virtual interfaces) then we can only + * add this interface when the rival interface count is 0. + */ + if (!test_bit(DRIVER_SUPPORT_MIXED_INTERFACES, &rt2x00dev->flags) && + ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) || + (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count))) + return -ENOBUFS; + + /* + * Check if we exceeded the maximum amount of supported interfaces. + */ + if ((conf->type == IEEE80211_IF_TYPE_AP && + rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf) || + (conf->type != IEEE80211_IF_TYPE_AP && + rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf)) return -ENOBUFS; - intf->id = conf->vif; - intf->type = conf->type; + /* + * Loop through all beacon queues to find a free + * entry. Since there are as much beacon entries + * as the maximum interfaces, this search shouldn't + * fail. + */ + for (i = 0; i < queue->limit; i++) { + entry = &queue->entries[i]; + if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) + break; + } + + if (unlikely(i == queue->limit)) + return -ENOBUFS; + + /* + * We are now absolutely sure the interface can be created, + * increase interface count and start initialization. + */ + + if (conf->type == IEEE80211_IF_TYPE_AP) + rt2x00dev->intf_ap_count++; + else + rt2x00dev->intf_sta_count++; + + spin_lock_init(&intf->lock); + intf->beacon = entry; + if (conf->type == IEEE80211_IF_TYPE_AP) memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN); memcpy(&intf->mac, conf->mac_addr, ETH_ALEN); @@ -192,8 +251,14 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, * has been initialized. Otherwise the device can reset * the MAC registers. */ - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_type(rt2x00dev, conf->type); + rt2x00lib_config_intf(rt2x00dev, intf, conf->type, intf->mac, NULL); + + /* + * Some filters depend on the current working mode. We can force + * an update during the next configure_filter() run by mac80211 by + * resetting the current packet_filter state. + */ + rt2x00dev->packet_filter = 0; return 0; } @@ -203,7 +268,7 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; + struct rt2x00_intf *intf = vif_to_intf(conf->vif); /* * Don't allow interfaces to be remove while @@ -211,21 +276,27 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, * no interface is present. */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - !is_interface_present(intf)) + (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) || + (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count)) return; - intf->id = 0; - intf->type = IEEE80211_IF_TYPE_INVALID; - memset(&intf->bssid, 0x00, ETH_ALEN); - memset(&intf->mac, 0x00, ETH_ALEN); + if (conf->type == IEEE80211_IF_TYPE_AP) + rt2x00dev->intf_ap_count--; + else + rt2x00dev->intf_sta_count--; + + /* + * Release beacon entry so it is available for + * new interfaces again. + */ + __clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); /* * Make sure the bssid and mac address registers * are cleared to prevent false ACKing of frames. */ - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); - rt2x00lib_config_type(rt2x00dev, intf->type); + rt2x00lib_config_intf(rt2x00dev, intf, + IEEE80211_IF_TYPE_INVALID, NULL, NULL); } EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); @@ -270,7 +341,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, struct ieee80211_if_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; + struct rt2x00_intf *intf = vif_to_intf(vif); int status; /* @@ -280,12 +351,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) return 0; - /* - * If the given type does not match the configured type, - * there has been a problem. - */ - if (conf->type != intf->type) - return -EINVAL; + spin_lock(&intf->lock); /* * If the interface does not work in master mode, @@ -294,7 +360,16 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, */ if (conf->type != IEEE80211_IF_TYPE_AP) memcpy(&intf->bssid, conf->bssid, ETH_ALEN); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); + + spin_unlock(&intf->lock); + + /* + * Call rt2x00_config_intf() outside of the spinlock context since + * the call will sleep for USB drivers. By using the ieee80211_if_conf + * values as arguments we make keep access to rt2x00_intf thread safe + * even without the lock. + */ + rt2x00lib_config_intf(rt2x00dev, intf, conf->type, NULL, conf->bssid); /* * We only need to initialize the beacon when master mode is enabled. @@ -312,6 +387,50 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_config_interface); +void rt2x00mac_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mc_list) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Mask off any flags we are going to ignore + * from the total_flags field. + */ + *total_flags &= + FIF_ALLMULTI | + FIF_FCSFAIL | + FIF_PLCPFAIL | + FIF_CONTROL | + FIF_OTHER_BSS | + FIF_PROMISC_IN_BSS; + + /* + * Apply some rules to the filters: + * - Some filters imply different filters to be set. + * - Some things we can't filter out at all. + * - Multicast filter seems to kill broadcast traffic so never use it. + */ + *total_flags |= FIF_ALLMULTI; + if (*total_flags & FIF_OTHER_BSS || + *total_flags & FIF_PROMISC_IN_BSS) + *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; + + /* + * Check if there is any work left for us. + */ + if (rt2x00dev->packet_filter == *total_flags) + return; + rt2x00dev->packet_filter = *total_flags; + + if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) + rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); + else + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); +} +EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); + int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { @@ -334,9 +453,11 @@ int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, struct rt2x00_dev *rt2x00dev = hw->priv; unsigned int i; - for (i = 0; i < hw->queues; i++) - memcpy(&stats->data[i], &rt2x00dev->tx[i].stats, - sizeof(rt2x00dev->tx[i].stats)); + for (i = 0; i < hw->queues; i++) { + stats->data[i].len = rt2x00dev->tx[i].length; + stats->data[i].limit = rt2x00dev->tx[i].limit; + stats->data[i].count = rt2x00dev->tx[i].count; + } return 0; } @@ -348,71 +469,83 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, u32 changes) { struct rt2x00_dev *rt2x00dev = hw->priv; - int short_preamble; - int ack_timeout; - int ack_consume_time; - int difs; - int preamble; + struct rt2x00_intf *intf = vif_to_intf(vif); + unsigned int delayed = 0; /* - * We only support changing preamble mode. + * When the association status has changed we must reset the link + * tuner counter. This is because some drivers determine if they + * should perform link tuning based on the number of seconds + * while associated or not associated. */ - if (!(changes & BSS_CHANGED_ERP_PREAMBLE)) - return; - - short_preamble = bss_conf->use_short_preamble; - preamble = bss_conf->use_short_preamble ? - SHORT_PREAMBLE : PREAMBLE; + if (changes & BSS_CHANGED_ASSOC) { + rt2x00dev->link.count = 0; - difs = (hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? - SHORT_DIFS : DIFS; - ack_timeout = difs + PLCP + preamble + get_duration(ACK_SIZE, 10); + if (bss_conf->assoc) + rt2x00dev->intf_associated++; + else + rt2x00dev->intf_associated--; - ack_consume_time = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10); + if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) + rt2x00leds_led_assoc(rt2x00dev, + !!rt2x00dev->intf_associated); + else + delayed |= DELAYED_LED_ASSOC; + } - if (short_preamble) - __set_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); - else - __clear_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); + /* + * When the erp information has changed, we should perform + * additional configuration steps. For all other changes we are done. + */ + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) + rt2x00lib_config_erp(rt2x00dev, intf, bss_conf); + else + delayed |= DELAYED_CONFIG_ERP; + } - rt2x00dev->ops->lib->config_preamble(rt2x00dev, short_preamble, - ack_timeout, ack_consume_time); + spin_lock(&intf->lock); + memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); + if (delayed) { + intf->delayed_flags |= delayed; + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + } + spin_unlock(&intf->lock); } EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_ring *ring; + struct data_queue *queue; - ring = rt2x00lib_get_ring(rt2x00dev, queue); - if (unlikely(!ring)) + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + if (unlikely(!queue)) return -EINVAL; /* * The passed variables are stored as real value ((2^n)-1). * Ralink registers require to know the bit number 'n'. */ - if (params->cw_min) - ring->tx_params.cw_min = fls(params->cw_min); + if (params->cw_min > 0) + queue->cw_min = fls(params->cw_min); else - ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */ + queue->cw_min = 5; /* cw_min: 2^5 = 32. */ - if (params->cw_max) - ring->tx_params.cw_max = fls(params->cw_max); + if (params->cw_max > 0) + queue->cw_max = fls(params->cw_max); else - ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */ + queue->cw_max = 10; /* cw_min: 2^10 = 1024. */ - if (params->aifs) - ring->tx_params.aifs = params->aifs; + if (params->aifs >= 0) + queue->aifs = params->aifs; else - ring->tx_params.aifs = 2; + queue->aifs = 2; INFO(rt2x00dev, - "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", - queue, ring->tx_params.cw_min, ring->tx_params.cw_max, - ring->tx_params.aifs); + "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", + queue_idx, queue->cw_min, queue->cw_max, queue->aifs); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 804a9980055..7867ec64bd2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -32,64 +32,21 @@ #include "rt2x00pci.h" /* - * Beacon handlers. - */ -int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct skb_desc *desc; - struct data_ring *ring; - struct data_entry *entry; - - /* - * Just in case mac80211 doesn't set this correctly, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - entry = rt2x00_get_data_entry(ring); - - /* - * Fill in skb descriptor - */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len; - desc->desc = entry->priv; - desc->data = skb->data; - desc->ring = ring; - desc->entry = entry; - - memcpy(entry->data_addr, skb->data, skb->len); - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* - * Enable beacon generation. - */ - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00pci_beacon_update); - -/* * TX data handlers. */ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control) { - struct data_entry *entry = rt2x00_get_data_entry(ring); - __le32 *txd = entry->priv; - struct skb_desc *desc; + struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); + struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; + struct skb_frame_desc *skbdesc; u32 word; - if (rt2x00_ring_full(ring)) + if (rt2x00queue_full(queue)) return -EINVAL; - rt2x00_desc_read(txd, 0, &word); + rt2x00_desc_read(priv_tx->desc, 0, &word); if (rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) || rt2x00_get_field32(word, TXD_ENTRY_VALID)) { @@ -103,18 +60,18 @@ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, /* * Fill in skb descriptor */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len; - desc->desc = entry->priv; - desc->data = skb->data; - desc->ring = ring; - desc->entry = entry; - - memcpy(entry->data_addr, skb->data, skb->len); + skbdesc = get_skb_frame_desc(skb); + skbdesc->data = skb->data; + skbdesc->data_len = skb->len; + skbdesc->desc = priv_tx->desc; + skbdesc->desc_len = queue->desc_size; + skbdesc->entry = entry; + + memcpy(&priv_tx->control, control, sizeof(priv_tx->control)); + memcpy(priv_tx->data, skb->data, skb->len); rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - rt2x00_ring_index_inc(ring); + rt2x00queue_index_inc(queue, Q_INDEX); return 0; } @@ -125,29 +82,28 @@ EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data); */ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring = rt2x00dev->rx; - struct data_entry *entry; - struct sk_buff *skb; + struct data_queue *queue = rt2x00dev->rx; + struct queue_entry *entry; + struct queue_entry_priv_pci_rx *priv_rx; struct ieee80211_hdr *hdr; - struct skb_desc *skbdesc; - struct rxdata_entry_desc desc; + struct skb_frame_desc *skbdesc; + struct rxdone_entry_desc rxdesc; int header_size; - __le32 *rxd; int align; u32 word; while (1) { - entry = rt2x00_get_data_entry(ring); - rxd = entry->priv; - rt2x00_desc_read(rxd, 0, &word); + entry = rt2x00queue_get_entry(queue, Q_INDEX); + priv_rx = entry->priv_data; + rt2x00_desc_read(priv_rx->desc, 0, &word); if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) break; - memset(&desc, 0, sizeof(desc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &desc); + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - hdr = (struct ieee80211_hdr *)entry->data_addr; + hdr = (struct ieee80211_hdr *)priv_rx->data; header_size = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); @@ -161,66 +117,68 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) * Allocate the sk_buffer, initialize it and copy * all data into it. */ - skb = dev_alloc_skb(desc.size + align); - if (!skb) + entry->skb = dev_alloc_skb(rxdesc.size + align); + if (!entry->skb) return; - skb_reserve(skb, align); - memcpy(skb_put(skb, desc.size), entry->data_addr, desc.size); + skb_reserve(entry->skb, align); + memcpy(skb_put(entry->skb, rxdesc.size), + priv_rx->data, rxdesc.size); /* * Fill in skb descriptor */ - skbdesc = get_skb_desc(skb); - skbdesc->desc_len = entry->ring->desc_size; - skbdesc->data_len = skb->len; - skbdesc->desc = entry->priv; - skbdesc->data = skb->data; - skbdesc->ring = ring; + skbdesc = get_skb_frame_desc(entry->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->data = entry->skb->data; + skbdesc->data_len = entry->skb->len; + skbdesc->desc = priv_rx->desc; + skbdesc->desc_len = queue->desc_size; skbdesc->entry = entry; /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, skb, &desc); + rt2x00lib_rxdone(entry, &rxdesc); - if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { + if (test_bit(DEVICE_ENABLED_RADIO, &queue->rt2x00dev->flags)) { rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); + rt2x00_desc_write(priv_rx->desc, 0, word); } - rt2x00_ring_index_inc(ring); + rt2x00queue_index_inc(queue, Q_INDEX); } } EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct data_entry *entry, - const int tx_status, const int retry) +void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, + struct txdone_entry_desc *txdesc) { + struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; u32 word; - rt2x00lib_txdone(entry, tx_status, retry); + txdesc->control = &priv_tx->control; + rt2x00lib_txdone(entry, txdesc); /* * Make this entry available for reuse. */ entry->flags = 0; - rt2x00_desc_read(entry->priv, 0, &word); + rt2x00_desc_read(priv_tx->desc, 0, &word); rt2x00_set_field32(&word, TXD_ENTRY_OWNER_NIC, 0); rt2x00_set_field32(&word, TXD_ENTRY_VALID, 0); - rt2x00_desc_write(entry->priv, 0, word); + rt2x00_desc_write(priv_tx->desc, 0, word); - rt2x00_ring_index_done_inc(entry->ring); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); /* - * If the data ring was full before the txdone handler + * If the data queue was full before the txdone handler * we must make sure the packet queue in the mac80211 stack * is reenabled when the txdone handler has finished. */ - if (!rt2x00_ring_full(entry->ring)) - ieee80211_wake_queue(rt2x00dev->hw, - entry->tx_status.control.queue); + if (!rt2x00queue_full(entry->queue)) + ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue); } EXPORT_SYMBOL_GPL(rt2x00pci_txdone); @@ -228,73 +186,122 @@ EXPORT_SYMBOL_GPL(rt2x00pci_txdone); /* * Device initialization handlers. */ -#define priv_offset(__ring, __i) \ -({ \ - ring->data_addr + (i * ring->desc_size); \ +#define desc_size(__queue) \ +({ \ + ((__queue)->limit * (__queue)->desc_size);\ +}) + +#define data_size(__queue) \ +({ \ + ((__queue)->limit * (__queue)->data_size);\ }) -#define data_addr_offset(__ring, __i) \ -({ \ - (__ring)->data_addr + \ - ((__ring)->stats.limit * (__ring)->desc_size) + \ - ((__i) * (__ring)->data_size); \ +#define dma_size(__queue) \ +({ \ + data_size(__queue) + desc_size(__queue);\ }) -#define data_dma_offset(__ring, __i) \ -({ \ - (__ring)->data_dma + \ - ((__ring)->stats.limit * (__ring)->desc_size) + \ - ((__i) * (__ring)->data_size); \ +#define desc_offset(__queue, __base, __i) \ +({ \ + (__base) + data_size(__queue) + \ + ((__i) * (__queue)->desc_size); \ }) -static int rt2x00pci_alloc_dma(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) +#define data_offset(__queue, __base, __i) \ +({ \ + (__base) + \ + ((__i) * (__queue)->data_size); \ +}) + +static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) { + struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct queue_entry_priv_pci_rx *priv_rx; + struct queue_entry_priv_pci_tx *priv_tx; + void *addr; + dma_addr_t dma; + void *desc_addr; + dma_addr_t desc_dma; + void *data_addr; + dma_addr_t data_dma; unsigned int i; /* * Allocate DMA memory for descriptor and buffer. */ - ring->data_addr = pci_alloc_consistent(rt2x00dev_pci(rt2x00dev), - rt2x00_get_ring_size(ring), - &ring->data_dma); - if (!ring->data_addr) + addr = pci_alloc_consistent(pci_dev, dma_size(queue), &dma); + if (!addr) return -ENOMEM; + memset(addr, 0, dma_size(queue)); + /* - * Initialize all ring entries to contain valid - * addresses. + * Initialize all queue entries to contain valid addresses. */ - for (i = 0; i < ring->stats.limit; i++) { - ring->entry[i].priv = priv_offset(ring, i); - ring->entry[i].data_addr = data_addr_offset(ring, i); - ring->entry[i].data_dma = data_dma_offset(ring, i); + for (i = 0; i < queue->limit; i++) { + desc_addr = desc_offset(queue, addr, i); + desc_dma = desc_offset(queue, dma, i); + data_addr = data_offset(queue, addr, i); + data_dma = data_offset(queue, dma, i); + + if (queue->qid == QID_RX) { + priv_rx = queue->entries[i].priv_data; + priv_rx->desc = desc_addr; + priv_rx->desc_dma = desc_dma; + priv_rx->data = data_addr; + priv_rx->data_dma = data_dma; + } else { + priv_tx = queue->entries[i].priv_data; + priv_tx->desc = desc_addr; + priv_tx->desc_dma = desc_dma; + priv_tx->data = data_addr; + priv_tx->data_dma = data_dma; + } } return 0; } -static void rt2x00pci_free_dma(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) +static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) { - if (ring->data_addr) - pci_free_consistent(rt2x00dev_pci(rt2x00dev), - rt2x00_get_ring_size(ring), - ring->data_addr, ring->data_dma); - ring->data_addr = NULL; + struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct queue_entry_priv_pci_rx *priv_rx; + struct queue_entry_priv_pci_tx *priv_tx; + void *data_addr; + dma_addr_t data_dma; + + if (queue->qid == QID_RX) { + priv_rx = queue->entries[0].priv_data; + data_addr = priv_rx->data; + data_dma = priv_rx->data_dma; + + priv_rx->data = NULL; + } else { + priv_tx = queue->entries[0].priv_data; + data_addr = priv_tx->data; + data_dma = priv_tx->data_dma; + + priv_tx->data = NULL; + } + + if (data_addr) + pci_free_consistent(pci_dev, dma_size(queue), + data_addr, data_dma); } int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) { struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); - struct data_ring *ring; + struct data_queue *queue; int status; /* * Allocate DMA */ - ring_for_each(rt2x00dev, ring) { - status = rt2x00pci_alloc_dma(rt2x00dev, ring); + queue_for_each(rt2x00dev, queue) { + status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue); if (status) goto exit; } @@ -321,7 +328,7 @@ EXPORT_SYMBOL_GPL(rt2x00pci_initialize); void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; + struct data_queue *queue; /* * Free irq line. @@ -331,8 +338,8 @@ void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) /* * Free DMA */ - ring_for_each(rt2x00dev, ring) - rt2x00pci_free_dma(rt2x00dev, ring); + queue_for_each(rt2x00dev, queue) + rt2x00pci_free_queue_dma(rt2x00dev, queue); } EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); @@ -347,9 +354,9 @@ static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) kfree(rt2x00dev->eeprom); rt2x00dev->eeprom = NULL; - if (rt2x00dev->csr_addr) { - iounmap(rt2x00dev->csr_addr); - rt2x00dev->csr_addr = NULL; + if (rt2x00dev->csr.base) { + iounmap(rt2x00dev->csr.base); + rt2x00dev->csr.base = NULL; } } @@ -357,9 +364,9 @@ static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) { struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); - rt2x00dev->csr_addr = ioremap(pci_resource_start(pci_dev, 0), + rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); - if (!rt2x00dev->csr_addr) + if (!rt2x00dev->csr.base) goto exit; rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); @@ -530,5 +537,5 @@ EXPORT_SYMBOL_GPL(rt2x00pci_resume); */ MODULE_AUTHOR(DRV_PROJECT); MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 library"); +MODULE_DESCRIPTION("rt2x00 pci library"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 2d1eb8144da..9d1cdb99431 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -61,7 +61,7 @@ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, const unsigned long offset, u32 *value) { - *value = readl(rt2x00dev->csr_addr + offset); + *value = readl(rt2x00dev->csr.base + offset); } static inline void @@ -69,14 +69,14 @@ rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, const unsigned long offset, void *value, const u16 length) { - memcpy_fromio(value, rt2x00dev->csr_addr + offset, length); + memcpy_fromio(value, rt2x00dev->csr.base + offset, length); } static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, const unsigned long offset, u32 value) { - writel(value, rt2x00dev->csr_addr + offset); + writel(value, rt2x00dev->csr.base + offset); } static inline void @@ -84,28 +84,63 @@ rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, const unsigned long offset, void *value, const u16 length) { - memcpy_toio(rt2x00dev->csr_addr + offset, value, length); + memcpy_toio(rt2x00dev->csr.base + offset, value, length); } /* - * Beacon handlers. - */ -int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); - -/* * TX data handlers. */ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control); -/* - * RX/TX data handlers. +/** + * struct queue_entry_priv_pci_rx: Per RX entry PCI specific information + * + * @desc: Pointer to device descriptor. + * @data: Pointer to device's entry memory. + * @dma: DMA pointer to &data. + */ +struct queue_entry_priv_pci_rx { + __le32 *desc; + dma_addr_t desc_dma; + + void *data; + dma_addr_t data_dma; +}; + +/** + * struct queue_entry_priv_pci_tx: Per TX entry PCI specific information + * + * @desc: Pointer to device descriptor + * @data: Pointer to device's entry memory. + * @dma: DMA pointer to &data. + * @control: mac80211 control structure used to transmit data. + */ +struct queue_entry_priv_pci_tx { + __le32 *desc; + dma_addr_t desc_dma; + + void *data; + dma_addr_t data_dma; + + struct ieee80211_tx_control control; +}; + +/** + * rt2x00pci_rxdone - Handle RX done events + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. */ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct data_entry *entry, - const int tx_status, const int retry); + +/** + * rt2x00pci_txdone - Handle TX done events + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @entry: Entry which has completed the transmission of a frame. + * @desc: TX done descriptor + */ +void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, + struct txdone_entry_desc *desc); /* * Device initialization handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c new file mode 100644 index 00000000000..659e9f44c40 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -0,0 +1,304 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 queue specific routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, + const unsigned int queue) +{ + int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + + if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) + return &rt2x00dev->tx[queue]; + + if (!rt2x00dev->bcn) + return NULL; + + if (queue == RT2X00_BCN_QUEUE_BEACON) + return &rt2x00dev->bcn[0]; + else if (queue == RT2X00_BCN_QUEUE_ATIM && atim) + return &rt2x00dev->bcn[1]; + + return NULL; +} +EXPORT_SYMBOL_GPL(rt2x00queue_get_queue); + +struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, + enum queue_index index) +{ + struct queue_entry *entry; + unsigned long irqflags; + + if (unlikely(index >= Q_INDEX_MAX)) { + ERROR(queue->rt2x00dev, + "Entry requested from invalid index type (%d)\n", index); + return NULL; + } + + spin_lock_irqsave(&queue->lock, irqflags); + + entry = &queue->entries[queue->index[index]]; + + spin_unlock_irqrestore(&queue->lock, irqflags); + + return entry; +} +EXPORT_SYMBOL_GPL(rt2x00queue_get_entry); + +void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) +{ + unsigned long irqflags; + + if (unlikely(index >= Q_INDEX_MAX)) { + ERROR(queue->rt2x00dev, + "Index change on invalid index type (%d)\n", index); + return; + } + + spin_lock_irqsave(&queue->lock, irqflags); + + queue->index[index]++; + if (queue->index[index] >= queue->limit) + queue->index[index] = 0; + + if (index == Q_INDEX) { + queue->length++; + } else if (index == Q_INDEX_DONE) { + queue->length--; + queue->count ++; + } + + spin_unlock_irqrestore(&queue->lock, irqflags); +} +EXPORT_SYMBOL_GPL(rt2x00queue_index_inc); + +static void rt2x00queue_reset(struct data_queue *queue) +{ + unsigned long irqflags; + + spin_lock_irqsave(&queue->lock, irqflags); + + queue->count = 0; + queue->length = 0; + memset(queue->index, 0, sizeof(queue->index)); + + spin_unlock_irqrestore(&queue->lock, irqflags); +} + +void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue = rt2x00dev->rx; + unsigned int i; + + rt2x00queue_reset(queue); + + if (!rt2x00dev->ops->lib->init_rxentry) + return; + + for (i = 0; i < queue->limit; i++) + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, + &queue->entries[i]); +} + +void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + unsigned int i; + + txall_queue_for_each(rt2x00dev, queue) { + rt2x00queue_reset(queue); + + if (!rt2x00dev->ops->lib->init_txentry) + continue; + + for (i = 0; i < queue->limit; i++) + rt2x00dev->ops->lib->init_txentry(rt2x00dev, + &queue->entries[i]); + } +} + +static int rt2x00queue_alloc_entries(struct data_queue *queue, + const struct data_queue_desc *qdesc) +{ + struct queue_entry *entries; + unsigned int entry_size; + unsigned int i; + + rt2x00queue_reset(queue); + + queue->limit = qdesc->entry_num; + queue->data_size = qdesc->data_size; + queue->desc_size = qdesc->desc_size; + + /* + * Allocate all queue entries. + */ + entry_size = sizeof(*entries) + qdesc->priv_size; + entries = kzalloc(queue->limit * entry_size, GFP_KERNEL); + if (!entries) + return -ENOMEM; + +#define QUEUE_ENTRY_PRIV_OFFSET(__base, __index, __limit, __esize, __psize) \ + ( ((char *)(__base)) + ((__limit) * (__esize)) + \ + ((__index) * (__psize)) ) + + for (i = 0; i < queue->limit; i++) { + entries[i].flags = 0; + entries[i].queue = queue; + entries[i].skb = NULL; + entries[i].entry_idx = i; + entries[i].priv_data = + QUEUE_ENTRY_PRIV_OFFSET(entries, i, queue->limit, + sizeof(*entries), qdesc->priv_size); + } + +#undef QUEUE_ENTRY_PRIV_OFFSET + + queue->entries = entries; + + return 0; +} + +int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + int status; + + + status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx); + if (status) + goto exit; + + tx_queue_for_each(rt2x00dev, queue) { + status = rt2x00queue_alloc_entries(queue, rt2x00dev->ops->tx); + if (status) + goto exit; + } + + status = rt2x00queue_alloc_entries(rt2x00dev->bcn, rt2x00dev->ops->bcn); + if (status) + goto exit; + + if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) + return 0; + + status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], + rt2x00dev->ops->atim); + if (status) + goto exit; + + return 0; + +exit: + ERROR(rt2x00dev, "Queue entries allocation failed.\n"); + + rt2x00queue_uninitialize(rt2x00dev); + + return status; +} + +void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + + queue_for_each(rt2x00dev, queue) { + kfree(queue->entries); + queue->entries = NULL; + } +} + +static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue, enum data_queue_qid qid) +{ + spin_lock_init(&queue->lock); + + queue->rt2x00dev = rt2x00dev; + queue->qid = qid; + queue->aifs = 2; + queue->cw_min = 5; + queue->cw_max = 10; +} + +int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + enum data_queue_qid qid; + unsigned int req_atim = + !!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + + /* + * We need the following queues: + * RX: 1 + * TX: hw->queues + * Beacon: 1 + * Atim: 1 (if required) + */ + rt2x00dev->data_queues = 2 + rt2x00dev->hw->queues + req_atim; + + queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL); + if (!queue) { + ERROR(rt2x00dev, "Queue allocation failed.\n"); + return -ENOMEM; + } + + /* + * Initialize pointers + */ + rt2x00dev->rx = queue; + rt2x00dev->tx = &queue[1]; + rt2x00dev->bcn = &queue[1 + rt2x00dev->hw->queues]; + + /* + * Initialize queue parameters. + * RX: qid = QID_RX + * TX: qid = QID_AC_BE + index + * TX: cw_min: 2^5 = 32. + * TX: cw_max: 2^10 = 1024. + * BCN & Atim: qid = QID_MGMT + */ + rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX); + + qid = QID_AC_BE; + tx_queue_for_each(rt2x00dev, queue) + rt2x00queue_init(rt2x00dev, queue, qid++); + + rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_MGMT); + if (req_atim) + rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_MGMT); + + return 0; +} + +void rt2x00queue_free(struct rt2x00_dev *rt2x00dev) +{ + kfree(rt2x00dev->rx); + rt2x00dev->rx = NULL; + rt2x00dev->tx = NULL; + rt2x00dev->bcn = NULL; +} diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h new file mode 100644 index 00000000000..7027c9f47d3 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -0,0 +1,468 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00 + Abstract: rt2x00 queue datastructures and routines + */ + +#ifndef RT2X00QUEUE_H +#define RT2X00QUEUE_H + +#include <linux/prefetch.h> + +/** + * DOC: Entrie frame size + * + * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes, + * for USB devices this restriction does not apply, but the value of + * 2432 makes sense since it is big enough to contain the maximum fragment + * size according to the ieee802.11 specs. + */ +#define DATA_FRAME_SIZE 2432 +#define MGMT_FRAME_SIZE 256 + +/** + * DOC: Number of entries per queue + * + * After research it was concluded that 12 entries in a RX and TX + * queue would be sufficient. Although this is almost one third of + * the amount the legacy driver allocated, the queues aren't getting + * filled to the maximum even when working with the maximum rate. + */ +#define RX_ENTRIES 12 +#define TX_ENTRIES 12 +#define BEACON_ENTRIES 1 +#define ATIM_ENTRIES 1 + +/** + * enum data_queue_qid: Queue identification + */ +enum data_queue_qid { + QID_AC_BE = 0, + QID_AC_BK = 1, + QID_AC_VI = 2, + QID_AC_VO = 3, + QID_HCCA = 4, + QID_MGMT = 13, + QID_RX = 14, + QID_OTHER = 15, +}; + +/** + * enum rt2x00_bcn_queue: Beacon queue index + * + * Start counting with a high offset, this because this enumeration + * supplements &enum ieee80211_tx_queue and we should prevent value + * conflicts. + * + * @RT2X00_BCN_QUEUE_BEACON: Beacon queue + * @RT2X00_BCN_QUEUE_ATIM: Atim queue (sends frame after beacon) + */ +enum rt2x00_bcn_queue { + RT2X00_BCN_QUEUE_BEACON = 100, + RT2X00_BCN_QUEUE_ATIM = 101, +}; + +/** + * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc + * + * @FRAME_DESC_DRIVER_GENERATED: Frame was generated inside driver + * and should not be reported back to mac80211 during txdone. + */ +enum skb_frame_desc_flags { + FRAME_DESC_DRIVER_GENERATED = 1 << 0, +}; + +/** + * struct skb_frame_desc: Descriptor information for the skb buffer + * + * This structure is placed over the skb->cb array, this means that + * this structure should not exceed the size of that array (48 bytes). + * + * @flags: Frame flags, see &enum skb_frame_desc_flags. + * @frame_type: Frame type, see &enum rt2x00_dump_type. + * @data: Pointer to data part of frame (Start of ieee80211 header). + * @desc: Pointer to descriptor part of the frame. + * Note that this pointer could point to something outside + * of the scope of the skb->data pointer. + * @data_len: Length of the frame data. + * @desc_len: Length of the frame descriptor. + + * @entry: The entry to which this sk buffer belongs. + */ +struct skb_frame_desc { + unsigned int flags; + + unsigned int frame_type; + + void *data; + void *desc; + + unsigned int data_len; + unsigned int desc_len; + + struct queue_entry *entry; +}; + +static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(struct skb_frame_desc) > sizeof(skb->cb)); + return (struct skb_frame_desc *)&skb->cb[0]; +} + +/** + * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc + * + * @RXDONE_SIGNAL_PLCP: Does the signal field contain the plcp value, + * or does it contain the bitrate itself. + * @RXDONE_MY_BSS: Does this frame originate from device's BSS. + */ +enum rxdone_entry_desc_flags { + RXDONE_SIGNAL_PLCP = 1 << 0, + RXDONE_MY_BSS = 1 << 1, +}; + +/** + * struct rxdone_entry_desc: RX Entry descriptor + * + * Summary of information that has been read from the RX frame descriptor. + * + * @signal: Signal of the received frame. + * @rssi: RSSI of the received frame. + * @size: Data size of the received frame. + * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). + * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). + + */ +struct rxdone_entry_desc { + int signal; + int rssi; + int size; + int flags; + int dev_flags; +}; + +/** + * struct txdone_entry_desc: TX done entry descriptor + * + * Summary of information that has been read from the TX frame descriptor + * after the device is done with transmission. + * + * @control: Control structure which was used to transmit the frame. + * @status: TX status (See &enum tx_status). + * @retry: Retry count. + */ +struct txdone_entry_desc { + struct ieee80211_tx_control *control; + int status; + int retry; +}; + +/** + * enum txentry_desc_flags: Status flags for TX entry descriptor + * + * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. + * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. + * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. + * @ENTRY_TXD_BURST: This frame belongs to the same burst event. + * @ENTRY_TXD_ACK: An ACK is required for this frame. + */ +enum txentry_desc_flags { + ENTRY_TXD_RTS_FRAME, + ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_MORE_FRAG, + ENTRY_TXD_REQ_TIMESTAMP, + ENTRY_TXD_BURST, + ENTRY_TXD_ACK, +}; + +/** + * struct txentry_desc: TX Entry descriptor + * + * Summary of information for the frame descriptor before sending a TX frame. + * + * @flags: Descriptor flags (See &enum queue_entry_flags). + * @queue: Queue identification (See &enum data_queue_qid). + * @length_high: PLCP length high word. + * @length_low: PLCP length low word. + * @signal: PLCP signal. + * @service: PLCP service. + * @aifs: AIFS value. + * @ifs: IFS value. + * @cw_min: cwmin value. + * @cw_max: cwmax value. + */ +struct txentry_desc { + unsigned long flags; + + enum data_queue_qid queue; + + u16 length_high; + u16 length_low; + u16 signal; + u16 service; + + int aifs; + int ifs; + int cw_min; + int cw_max; +}; + +/** + * enum queue_entry_flags: Status flags for queue entry + * + * @ENTRY_BCN_ASSIGNED: This entry has been assigned to an interface. + * As long as this bit is set, this entry may only be touched + * through the interface structure. + * @ENTRY_OWNER_DEVICE_DATA: This entry is owned by the device for data + * transfer (either TX or RX depending on the queue). The entry should + * only be touched after the device has signaled it is done with it. + * @ENTRY_OWNER_DEVICE_CRYPTO: This entry is owned by the device for data + * encryption or decryption. The entry should only be touched after + * the device has signaled it is done with it. + */ + +enum queue_entry_flags { + ENTRY_BCN_ASSIGNED, + ENTRY_OWNER_DEVICE_DATA, + ENTRY_OWNER_DEVICE_CRYPTO, +}; + +/** + * struct queue_entry: Entry inside the &struct data_queue + * + * @flags: Entry flags, see &enum queue_entry_flags. + * @queue: The data queue (&struct data_queue) to which this entry belongs. + * @skb: The buffer which is currently being transmitted (for TX queue), + * or used to directly recieve data in (for RX queue). + * @entry_idx: The entry index number. + * @priv_data: Private data belonging to this queue entry. The pointer + * points to data specific to a particular driver and queue type. + */ +struct queue_entry { + unsigned long flags; + + struct data_queue *queue; + + struct sk_buff *skb; + + unsigned int entry_idx; + + void *priv_data; +}; + +/** + * enum queue_index: Queue index type + * + * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is + * owned by the hardware then the queue is considered to be full. + * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by + * the hardware and for which we need to run the txdone handler. If this + * entry is not owned by the hardware the queue is considered to be empty. + * @Q_INDEX_CRYPTO: Index pointer to the next entry which encryption/decription + * will be completed by the hardware next. + * @Q_INDEX_MAX: Keep last, used in &struct data_queue to determine the size + * of the index array. + */ +enum queue_index { + Q_INDEX, + Q_INDEX_DONE, + Q_INDEX_CRYPTO, + Q_INDEX_MAX, +}; + +/** + * struct data_queue: Data queue + * + * @rt2x00dev: Pointer to main &struct rt2x00dev where this queue belongs to. + * @entries: Base address of the &struct queue_entry which are + * part of this queue. + * @qid: The queue identification, see &enum data_queue_qid. + * @lock: Spinlock to protect index handling. Whenever @index, @index_done or + * @index_crypt needs to be changed this lock should be grabbed to prevent + * index corruption due to concurrency. + * @count: Number of frames handled in the queue. + * @limit: Maximum number of entries in the queue. + * @length: Number of frames in queue. + * @index: Index pointers to entry positions in the queue, + * use &enum queue_index to get a specific index field. + * @aifs: The aifs value for outgoing frames (field ignored in RX queue). + * @cw_min: The cw min value for outgoing frames (field ignored in RX queue). + * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). + * @data_size: Maximum data size for the frames in this queue. + * @desc_size: Hardware descriptor size for the data in this queue. + */ +struct data_queue { + struct rt2x00_dev *rt2x00dev; + struct queue_entry *entries; + + enum data_queue_qid qid; + + spinlock_t lock; + unsigned int count; + unsigned short limit; + unsigned short length; + unsigned short index[Q_INDEX_MAX]; + + unsigned short aifs; + unsigned short cw_min; + unsigned short cw_max; + + unsigned short data_size; + unsigned short desc_size; +}; + +/** + * struct data_queue_desc: Data queue description + * + * The information in this structure is used by drivers + * to inform rt2x00lib about the creation of the data queue. + * + * @entry_num: Maximum number of entries for a queue. + * @data_size: Maximum data size for the frames in this queue. + * @desc_size: Hardware descriptor size for the data in this queue. + * @priv_size: Size of per-queue_entry private data. + */ +struct data_queue_desc { + unsigned short entry_num; + unsigned short data_size; + unsigned short desc_size; + unsigned short priv_size; +}; + +/** + * queue_end - Return pointer to the last queue (HELPER MACRO). + * @__dev: Pointer to &struct rt2x00_dev + * + * Using the base rx pointer and the maximum number of available queues, + * this macro will return the address of 1 position beyond the end of the + * queues array. + */ +#define queue_end(__dev) \ + &(__dev)->rx[(__dev)->data_queues] + +/** + * tx_queue_end - Return pointer to the last TX queue (HELPER MACRO). + * @__dev: Pointer to &struct rt2x00_dev + * + * Using the base tx pointer and the maximum number of available TX + * queues, this macro will return the address of 1 position beyond + * the end of the TX queue array. + */ +#define tx_queue_end(__dev) \ + &(__dev)->tx[(__dev)->hw->queues] + +/** + * queue_loop - Loop through the queues within a specific range (HELPER MACRO). + * @__entry: Pointer where the current queue entry will be stored in. + * @__start: Start queue pointer. + * @__end: End queue pointer. + * + * This macro will loop through all queues between &__start and &__end. + */ +#define queue_loop(__entry, __start, __end) \ + for ((__entry) = (__start); \ + prefetch(&(__entry)[1]), (__entry) != (__end); \ + (__entry) = &(__entry)[1]) + +/** + * queue_for_each - Loop through all queues + * @__dev: Pointer to &struct rt2x00_dev + * @__entry: Pointer where the current queue entry will be stored in. + * + * This macro will loop through all available queues. + */ +#define queue_for_each(__dev, __entry) \ + queue_loop(__entry, (__dev)->rx, queue_end(__dev)) + +/** + * tx_queue_for_each - Loop through the TX queues + * @__dev: Pointer to &struct rt2x00_dev + * @__entry: Pointer where the current queue entry will be stored in. + * + * This macro will loop through all TX related queues excluding + * the Beacon and Atim queues. + */ +#define tx_queue_for_each(__dev, __entry) \ + queue_loop(__entry, (__dev)->tx, tx_queue_end(__dev)) + +/** + * txall_queue_for_each - Loop through all TX related queues + * @__dev: Pointer to &struct rt2x00_dev + * @__entry: Pointer where the current queue entry will be stored in. + * + * This macro will loop through all TX related queues including + * the Beacon and Atim queues. + */ +#define txall_queue_for_each(__dev, __entry) \ + queue_loop(__entry, (__dev)->tx, queue_end(__dev)) + +/** + * rt2x00queue_empty - Check if the queue is empty. + * @queue: Queue to check if empty. + */ +static inline int rt2x00queue_empty(struct data_queue *queue) +{ + return queue->length == 0; +} + +/** + * rt2x00queue_full - Check if the queue is full. + * @queue: Queue to check if full. + */ +static inline int rt2x00queue_full(struct data_queue *queue) +{ + return queue->length == queue->limit; +} + +/** + * rt2x00queue_free - Check the number of available entries in queue. + * @queue: Queue to check. + */ +static inline int rt2x00queue_available(struct data_queue *queue) +{ + return queue->limit - queue->length; +} + +/** + * rt2x00_desc_read - Read a word from the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be read. + * @value: Address where the descriptor value should be written into. + */ +static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value) +{ + *value = le32_to_cpu(desc[word]); +} + +/** + * rt2x00_desc_write - wrote a word to the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be written. + * @value: Value that should be written into the descriptor. + */ +static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) +{ + desc[word] = cpu_to_le32(value); +} + +#endif /* RT2X00QUEUE_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index b1915dc7dda..0325bed2fbf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -29,7 +29,7 @@ /* * TX result flags. */ -enum TX_STATUS { +enum tx_status { TX_SUCCESS = 0, TX_SUCCESS_RETRY = 1, TX_FAIL_RETRY = 2, @@ -220,75 +220,4 @@ static inline u8 rt2x00_get_field8(const u8 reg, return (reg & field.bit_mask) >> field.bit_offset; } -/* - * Device specific rate value. - * We will have to create the device specific rate value - * passed to the ieee80211 kernel. We need to make it a consist of - * multiple fields because we want to store more then 1 device specific - * values inside the value. - * 1 - rate, stored as 100 kbit/s. - * 2 - preamble, short_preamble enabled flag. - * 3 - MASK_RATE, which rates are enabled in this mode, this mask - * corresponds with the TX register format for the current device. - * 4 - plcp, 802.11b rates are device specific, - * 802.11g rates are set according to the ieee802.11a-1999 p.14. - * The bit to enable preamble is set in a seperate define. - */ -#define DEV_RATE FIELD32(0x000007ff) -#define DEV_PREAMBLE FIELD32(0x00000800) -#define DEV_RATEMASK FIELD32(0x00fff000) -#define DEV_PLCP FIELD32(0xff000000) - -/* - * Bitfields - */ -#define DEV_RATEBIT_1MB ( 1 << 0 ) -#define DEV_RATEBIT_2MB ( 1 << 1 ) -#define DEV_RATEBIT_5_5MB ( 1 << 2 ) -#define DEV_RATEBIT_11MB ( 1 << 3 ) -#define DEV_RATEBIT_6MB ( 1 << 4 ) -#define DEV_RATEBIT_9MB ( 1 << 5 ) -#define DEV_RATEBIT_12MB ( 1 << 6 ) -#define DEV_RATEBIT_18MB ( 1 << 7 ) -#define DEV_RATEBIT_24MB ( 1 << 8 ) -#define DEV_RATEBIT_36MB ( 1 << 9 ) -#define DEV_RATEBIT_48MB ( 1 << 10 ) -#define DEV_RATEBIT_54MB ( 1 << 11 ) - -/* - * Bitmasks for DEV_RATEMASK - */ -#define DEV_RATEMASK_1MB ( (DEV_RATEBIT_1MB << 1) -1 ) -#define DEV_RATEMASK_2MB ( (DEV_RATEBIT_2MB << 1) -1 ) -#define DEV_RATEMASK_5_5MB ( (DEV_RATEBIT_5_5MB << 1) -1 ) -#define DEV_RATEMASK_11MB ( (DEV_RATEBIT_11MB << 1) -1 ) -#define DEV_RATEMASK_6MB ( (DEV_RATEBIT_6MB << 1) -1 ) -#define DEV_RATEMASK_9MB ( (DEV_RATEBIT_9MB << 1) -1 ) -#define DEV_RATEMASK_12MB ( (DEV_RATEBIT_12MB << 1) -1 ) -#define DEV_RATEMASK_18MB ( (DEV_RATEBIT_18MB << 1) -1 ) -#define DEV_RATEMASK_24MB ( (DEV_RATEBIT_24MB << 1) -1 ) -#define DEV_RATEMASK_36MB ( (DEV_RATEBIT_36MB << 1) -1 ) -#define DEV_RATEMASK_48MB ( (DEV_RATEBIT_48MB << 1) -1 ) -#define DEV_RATEMASK_54MB ( (DEV_RATEBIT_54MB << 1) -1 ) - -/* - * Bitmask groups of bitrates - */ -#define DEV_BASIC_RATEMASK \ - ( DEV_RATEMASK_11MB | \ - DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB ) - -#define DEV_CCK_RATEMASK ( DEV_RATEMASK_11MB ) -#define DEV_OFDM_RATEMASK ( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK ) - -/* - * Macro's to set and get specific fields from the device specific val and val2 - * fields inside the ieee80211_rate entry. - */ -#define DEVICE_SET_RATE_FIELD(__value, __mask) \ - (int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask ) - -#define DEVICE_GET_RATE_FIELD(__value, __mask) \ - (int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset ) - #endif /* RT2X00REG_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index f9557759620..fcef9885ab5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00ring.h b/drivers/net/wireless/rt2x00/rt2x00ring.h deleted file mode 100644 index 1caa6d688c4..00000000000 --- a/drivers/net/wireless/rt2x00/rt2x00ring.h +++ /dev/null @@ -1,290 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 ring datastructures and routines - */ - -#ifndef RT2X00RING_H -#define RT2X00RING_H - -/* - * skb_desc - * Descriptor information for the skb buffer - */ -struct skb_desc { - unsigned int frame_type; - - unsigned int desc_len; - unsigned int data_len; - - void *desc; - void *data; - - struct data_ring *ring; - struct data_entry *entry; -}; - -static inline struct skb_desc* get_skb_desc(struct sk_buff *skb) -{ - return (struct skb_desc*)&skb->cb[0]; -} - -/* - * rxdata_entry_desc - * Summary of information that has been read from the - * RX frame descriptor. - */ -struct rxdata_entry_desc { - int signal; - int rssi; - int ofdm; - int size; - int flags; - int my_bss; -}; - -/* - * txdata_entry_desc - * Summary of information that should be written into the - * descriptor for sending a TX frame. - */ -struct txdata_entry_desc { - unsigned long flags; -#define ENTRY_TXDONE 1 -#define ENTRY_TXD_RTS_FRAME 2 -#define ENTRY_TXD_OFDM_RATE 3 -#define ENTRY_TXD_MORE_FRAG 4 -#define ENTRY_TXD_REQ_TIMESTAMP 5 -#define ENTRY_TXD_BURST 6 -#define ENTRY_TXD_ACK 7 - -/* - * Queue ID. ID's 0-4 are data TX rings - */ - int queue; -#define QUEUE_MGMT 13 -#define QUEUE_RX 14 -#define QUEUE_OTHER 15 - - /* - * PLCP values. - */ - u16 length_high; - u16 length_low; - u16 signal; - u16 service; - - /* - * Timing information - */ - int aifs; - int ifs; - int cw_min; - int cw_max; -}; - -/* - * data_entry - * The data ring is a list of data entries. - * Each entry holds a reference to the descriptor - * and the data buffer. For TX rings the reference to the - * sk_buff of the packet being transmitted is also stored here. - */ -struct data_entry { - /* - * Status flags - */ - unsigned long flags; -#define ENTRY_OWNER_NIC 1 - - /* - * Ring we belong to. - */ - struct data_ring *ring; - - /* - * sk_buff for the packet which is being transmitted - * in this entry (Only used with TX related rings). - */ - struct sk_buff *skb; - - /* - * Store a ieee80211_tx_status structure in each - * ring entry, this will optimize the txdone - * handler. - */ - struct ieee80211_tx_status tx_status; - - /* - * private pointer specific to driver. - */ - void *priv; - - /* - * Data address for this entry. - */ - void *data_addr; - dma_addr_t data_dma; - - /* - * Entry identification number (index). - */ - unsigned int entry_idx; -}; - -/* - * data_ring - * Data rings are used by the device to send and receive packets. - * The data_addr is the base address of the data memory. - * To determine at which point in the ring we are, - * have to use the rt2x00_ring_index_*() functions. - */ -struct data_ring { - /* - * Pointer to main rt2x00dev structure where this - * ring belongs to. - */ - struct rt2x00_dev *rt2x00dev; - - /* - * Base address for the device specific data entries. - */ - struct data_entry *entry; - - /* - * TX queue statistic info. - */ - struct ieee80211_tx_queue_stats_data stats; - - /* - * TX Queue parameters. - */ - struct ieee80211_tx_queue_params tx_params; - - /* - * Base address for data ring. - */ - dma_addr_t data_dma; - void *data_addr; - - /* - * Queue identification number: - * RX: 0 - * TX: IEEE80211_TX_* - */ - unsigned int queue_idx; - - /* - * Index variables. - */ - u16 index; - u16 index_done; - - /* - * Size of packet and descriptor in bytes. - */ - u16 data_size; - u16 desc_size; -}; - -/* - * Handlers to determine the address of the current device specific - * data entry, where either index or index_done points to. - */ -static inline struct data_entry *rt2x00_get_data_entry(struct data_ring *ring) -{ - return &ring->entry[ring->index]; -} - -static inline struct data_entry *rt2x00_get_data_entry_done(struct data_ring - *ring) -{ - return &ring->entry[ring->index_done]; -} - -/* - * Total ring memory - */ -static inline int rt2x00_get_ring_size(struct data_ring *ring) -{ - return ring->stats.limit * (ring->desc_size + ring->data_size); -} - -/* - * Ring index manipulation functions. - */ -static inline void rt2x00_ring_index_inc(struct data_ring *ring) -{ - ring->index++; - if (ring->index >= ring->stats.limit) - ring->index = 0; - ring->stats.len++; -} - -static inline void rt2x00_ring_index_done_inc(struct data_ring *ring) -{ - ring->index_done++; - if (ring->index_done >= ring->stats.limit) - ring->index_done = 0; - ring->stats.len--; - ring->stats.count++; -} - -static inline void rt2x00_ring_index_clear(struct data_ring *ring) -{ - ring->index = 0; - ring->index_done = 0; - ring->stats.len = 0; - ring->stats.count = 0; -} - -static inline int rt2x00_ring_empty(struct data_ring *ring) -{ - return ring->stats.len == 0; -} - -static inline int rt2x00_ring_full(struct data_ring *ring) -{ - return ring->stats.len == ring->stats.limit; -} - -static inline int rt2x00_ring_free(struct data_ring *ring) -{ - return ring->stats.limit - ring->stats.len; -} - -/* - * TX/RX Descriptor access functions. - */ -static inline void rt2x00_desc_read(__le32 *desc, - const u8 word, u32 *value) -{ - *value = le32_to_cpu(desc[word]); -} - -static inline void rt2x00_desc_write(__le32 *desc, - const u8 word, const u32 value) -{ - desc[word] = cpu_to_le32(value); -} - -#endif /* RT2X00RING_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 84e9bdb7391..5a331674dcb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -40,8 +40,7 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout) { - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); + struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); int status; unsigned int i; unsigned int pipe = @@ -85,20 +84,20 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, /* * Check for Cache availability. */ - if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) { + if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) { ERROR(rt2x00dev, "CSR cache not available.\n"); return -ENOMEM; } if (requesttype == USB_VENDOR_REQUEST_OUT) - memcpy(rt2x00dev->csr_cache, buffer, buffer_length); + memcpy(rt2x00dev->csr.cache, buffer, buffer_length); status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, - offset, 0, rt2x00dev->csr_cache, + offset, 0, rt2x00dev->csr.cache, buffer_length, timeout); if (!status && requesttype == USB_VENDOR_REQUEST_IN) - memcpy(buffer, rt2x00dev->csr_cache, buffer_length); + memcpy(buffer, rt2x00dev->csr.cache, buffer_length); return status; } @@ -128,15 +127,15 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); */ static void rt2x00usb_interrupt_txdone(struct urb *urb) { - struct data_entry *entry = (struct data_entry *)urb->context; - struct data_ring *ring = entry->ring; - struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; + struct queue_entry *entry = (struct queue_entry *)urb->context; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data; + struct txdone_entry_desc txdesc; __le32 *txd = (__le32 *)entry->skb->data; u32 word; - int tx_status; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) + !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; rt2x00_desc_read(txd, 0, &word); @@ -144,45 +143,46 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) /* * Remove the descriptor data from the buffer. */ - skb_pull(entry->skb, ring->desc_size); + skb_pull(entry->skb, entry->queue->desc_size); /* * Obtain the status about this packet. */ - tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; + txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; + txdesc.retry = 0; + txdesc.control = &priv_tx->control; - rt2x00lib_txdone(entry, tx_status, 0); + rt2x00lib_txdone(entry, &txdesc); /* * Make this entry available for reuse. */ entry->flags = 0; - rt2x00_ring_index_done_inc(entry->ring); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); /* - * If the data ring was full before the txdone handler + * If the data queue was full before the txdone handler * we must make sure the packet queue in the mac80211 stack * is reenabled when the txdone handler has finished. */ - if (!rt2x00_ring_full(ring)) - ieee80211_wake_queue(rt2x00dev->hw, - entry->tx_status.control.queue); + if (!rt2x00queue_full(entry->queue)) + ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue); } int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control) { - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); - struct data_entry *entry = rt2x00_get_data_entry(ring); - struct skb_desc *desc; + struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); + struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data; + struct skb_frame_desc *skbdesc; u32 length; - if (rt2x00_ring_full(ring)) + if (rt2x00queue_full(queue)) return -EINVAL; - if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) { + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { ERROR(rt2x00dev, "Arrived at non-free entry in the non-full queue %d.\n" "Please file bug report to %s.\n", @@ -193,20 +193,20 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, /* * Add the descriptor in front of the skb. */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); + skb_push(skb, queue->desc_size); + memset(skb->data, 0, queue->desc_size); /* * Fill in skb descriptor */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len - ring->desc_size; - desc->desc = skb->data; - desc->data = skb->data + ring->desc_size; - desc->ring = ring; - desc->entry = entry; + skbdesc = get_skb_frame_desc(skb); + skbdesc->data = skb->data + queue->desc_size; + skbdesc->data_len = skb->len - queue->desc_size; + skbdesc->desc = skb->data; + skbdesc->desc_len = queue->desc_size; + skbdesc->entry = entry; + memcpy(&priv_tx->control, control, sizeof(priv_tx->control)); rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* @@ -219,12 +219,12 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, /* * Initialize URB and send the frame to the device. */ - __set_bit(ENTRY_OWNER_NIC, &entry->flags); - usb_fill_bulk_urb(entry->priv, usb_dev, usb_sndbulkpipe(usb_dev, 1), + __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + usb_fill_bulk_urb(priv_tx->urb, usb_dev, usb_sndbulkpipe(usb_dev, 1), skb->data, length, rt2x00usb_interrupt_txdone, entry); - usb_submit_urb(entry->priv, GFP_ATOMIC); + usb_submit_urb(priv_tx->urb, GFP_ATOMIC); - rt2x00_ring_index_inc(ring); + rt2x00queue_index_inc(queue, Q_INDEX); return 0; } @@ -233,20 +233,42 @@ EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); /* * RX data handlers. */ +static struct sk_buff* rt2x00usb_alloc_rxskb(struct data_queue *queue) +{ + struct sk_buff *skb; + unsigned int frame_size; + + /* + * As alignment we use 2 and not NET_IP_ALIGN because we need + * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN + * can be 0 on some hardware). We use these 2 bytes for frame + * alignment later, we assume that the chance that + * header_size % 4 == 2 is bigger then header_size % 2 == 0 + * and thus optimize alignment by reserving the 2 bytes in + * advance. + */ + frame_size = queue->data_size + queue->desc_size; + skb = dev_alloc_skb(queue->desc_size + frame_size + 2); + if (!skb) + return NULL; + + skb_reserve(skb, queue->desc_size + 2); + skb_put(skb, frame_size); + + return skb; +} + static void rt2x00usb_interrupt_rxdone(struct urb *urb) { - struct data_entry *entry = (struct data_entry *)urb->context; - struct data_ring *ring = entry->ring; - struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; + struct queue_entry *entry = (struct queue_entry *)urb->context; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct sk_buff *skb; - struct ieee80211_hdr *hdr; - struct skb_desc *skbdesc; - struct rxdata_entry_desc desc; + struct skb_frame_desc *skbdesc; + struct rxdone_entry_desc rxdesc; int header_size; - int frame_size; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) + !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* @@ -254,67 +276,45 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * to be actually valid, or if the urb is signaling * a problem. */ - if (urb->actual_length < entry->ring->desc_size || urb->status) + if (urb->actual_length < entry->queue->desc_size || urb->status) goto skip_entry; /* * Fill in skb descriptor */ - skbdesc = get_skb_desc(entry->skb); - skbdesc->ring = ring; + skbdesc = get_skb_frame_desc(entry->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; - memset(&desc, 0, sizeof(desc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &desc); - - /* - * Allocate a new sk buffer to replace the current one. - * If allocation fails, we should drop the current frame - * so we can recycle the existing sk buffer for the new frame. - * As alignment we use 2 and not NET_IP_ALIGN because we need - * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN - * can be 0 on some hardware). We use these 2 bytes for frame - * alignment later, we assume that the chance that - * header_size % 4 == 2 is bigger then header_size % 2 == 0 - * and thus optimize alignment by reserving the 2 bytes in - * advance. - */ - frame_size = entry->ring->data_size + entry->ring->desc_size; - skb = dev_alloc_skb(frame_size + 2); - if (!skb) - goto skip_entry; - - skb_reserve(skb, 2); - skb_put(skb, frame_size); + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); /* * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ - hdr = (struct ieee80211_hdr *)entry->skb->data; - header_size = - ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); - + header_size = ieee80211_get_hdrlen_from_skb(entry->skb); if (header_size % 4 == 0) { skb_push(entry->skb, 2); - memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2); + memmove(entry->skb->data, entry->skb->data + 2, + entry->skb->len - 2); + skbdesc->data = entry->skb->data; + skb_trim(entry->skb,entry->skb->len - 2); } /* - * Trim the entire buffer down to only contain the valid frame data - * excluding the device descriptor. The position of the descriptor - * varies. This means that we should check where the descriptor is - * and decide if we need to pull the data pointer to exclude the - * device descriptor. + * Allocate a new sk buffer to replace the current one. + * If allocation fails, we should drop the current frame + * so we can recycle the existing sk buffer for the new frame. */ - if (skbdesc->data > skbdesc->desc) - skb_pull(entry->skb, skbdesc->desc_len); - skb_trim(entry->skb, desc.size); + skb = rt2x00usb_alloc_rxskb(entry->queue); + if (!skb) + goto skip_entry; /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, entry->skb, &desc); + rt2x00lib_rxdone(entry, &rxdesc); /* * Replace current entry's skb with the newly allocated one, @@ -325,12 +325,12 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) urb->transfer_buffer_length = entry->skb->len; skip_entry: - if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { - __set_bit(ENTRY_OWNER_NIC, &entry->flags); + if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) { + __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); usb_submit_urb(urb, GFP_ATOMIC); } - rt2x00_ring_index_inc(ring); + rt2x00queue_index_inc(entry->queue, Q_INDEX); } /* @@ -338,18 +338,44 @@ skip_entry: */ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; + struct queue_entry_priv_usb_rx *priv_rx; + struct queue_entry_priv_usb_tx *priv_tx; + struct queue_entry_priv_usb_bcn *priv_bcn; + struct data_queue *queue; unsigned int i; rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, REGISTER_TIMEOUT); /* - * Cancel all rings. + * Cancel all queues. */ - ring_for_each(rt2x00dev, ring) { - for (i = 0; i < ring->stats.limit; i++) - usb_kill_urb(ring->entry[i].priv); + for (i = 0; i < rt2x00dev->rx->limit; i++) { + priv_rx = rt2x00dev->rx->entries[i].priv_data; + usb_kill_urb(priv_rx->urb); + } + + tx_queue_for_each(rt2x00dev, queue) { + for (i = 0; i < queue->limit; i++) { + priv_tx = queue->entries[i].priv_data; + usb_kill_urb(priv_tx->urb); + } + } + + for (i = 0; i < rt2x00dev->bcn->limit; i++) { + priv_bcn = rt2x00dev->bcn->entries[i].priv_data; + usb_kill_urb(priv_bcn->urb); + + if (priv_bcn->guardian_urb) + usb_kill_urb(priv_bcn->guardian_urb); + } + + if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) + return; + + for (i = 0; i < rt2x00dev->bcn[1].limit; i++) { + priv_tx = rt2x00dev->bcn[1].entries[i].priv_data; + usb_kill_urb(priv_tx->urb); } } EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); @@ -358,64 +384,108 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); * Device initialization handlers. */ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); + struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data; - usb_fill_bulk_urb(entry->priv, usb_dev, + usb_fill_bulk_urb(priv_rx->urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1), entry->skb->data, entry->skb->len, rt2x00usb_interrupt_rxdone, entry); - __set_bit(ENTRY_OWNER_NIC, &entry->flags); - usb_submit_urb(entry->priv, GFP_ATOMIC); + __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + usb_submit_urb(priv_rx->urb, GFP_ATOMIC); } EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry); void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { entry->flags = 0; } EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry); static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) + struct data_queue *queue) { + struct queue_entry_priv_usb_rx *priv_rx; + struct queue_entry_priv_usb_tx *priv_tx; + struct queue_entry_priv_usb_bcn *priv_bcn; + struct urb *urb; + unsigned int guardian = + test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); unsigned int i; /* * Allocate the URB's */ - for (i = 0; i < ring->stats.limit; i++) { - ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL); - if (!ring->entry[i].priv) + for (i = 0; i < queue->limit; i++) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) return -ENOMEM; + + if (queue->qid == QID_RX) { + priv_rx = queue->entries[i].priv_data; + priv_rx->urb = urb; + } else if (queue->qid == QID_MGMT && guardian) { + priv_bcn = queue->entries[i].priv_data; + priv_bcn->urb = urb; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + priv_bcn->guardian_urb = urb; + } else { + priv_tx = queue->entries[i].priv_data; + priv_tx->urb = urb; + } } return 0; } static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) + struct data_queue *queue) { + struct queue_entry_priv_usb_rx *priv_rx; + struct queue_entry_priv_usb_tx *priv_tx; + struct queue_entry_priv_usb_bcn *priv_bcn; + struct urb *urb; + unsigned int guardian = + test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); unsigned int i; - if (!ring->entry) + if (!queue->entries) return; - for (i = 0; i < ring->stats.limit; i++) { - usb_kill_urb(ring->entry[i].priv); - usb_free_urb(ring->entry[i].priv); - if (ring->entry[i].skb) - kfree_skb(ring->entry[i].skb); + for (i = 0; i < queue->limit; i++) { + if (queue->qid == QID_RX) { + priv_rx = queue->entries[i].priv_data; + urb = priv_rx->urb; + } else if (queue->qid == QID_MGMT && guardian) { + priv_bcn = queue->entries[i].priv_data; + + usb_kill_urb(priv_bcn->guardian_urb); + usb_free_urb(priv_bcn->guardian_urb); + + urb = priv_bcn->urb; + } else { + priv_tx = queue->entries[i].priv_data; + urb = priv_tx->urb; + } + + usb_kill_urb(urb); + usb_free_urb(urb); + if (queue->entries[i].skb) + kfree_skb(queue->entries[i].skb); } } int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; + struct data_queue *queue; struct sk_buff *skb; unsigned int entry_size; unsigned int i; @@ -424,25 +494,22 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) /* * Allocate DMA */ - ring_for_each(rt2x00dev, ring) { - status = rt2x00usb_alloc_urb(rt2x00dev, ring); + queue_for_each(rt2x00dev, queue) { + status = rt2x00usb_alloc_urb(rt2x00dev, queue); if (status) goto exit; } /* - * For the RX ring, skb's should be allocated. + * For the RX queue, skb's should be allocated. */ entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; - for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { - skb = dev_alloc_skb(NET_IP_ALIGN + entry_size); + for (i = 0; i < rt2x00dev->rx->limit; i++) { + skb = rt2x00usb_alloc_rxskb(rt2x00dev->rx); if (!skb) goto exit; - skb_reserve(skb, NET_IP_ALIGN); - skb_put(skb, entry_size); - - rt2x00dev->rx->entry[i].skb = skb; + rt2x00dev->rx->entries[i].skb = skb; } return 0; @@ -456,10 +523,10 @@ EXPORT_SYMBOL_GPL(rt2x00usb_initialize); void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; + struct data_queue *queue; - ring_for_each(rt2x00dev, ring) - rt2x00usb_free_urb(rt2x00dev, ring); + queue_for_each(rt2x00dev, queue) + rt2x00usb_free_urb(rt2x00dev, queue); } EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); @@ -474,14 +541,14 @@ static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) kfree(rt2x00dev->eeprom); rt2x00dev->eeprom = NULL; - kfree(rt2x00dev->csr_cache); - rt2x00dev->csr_cache = NULL; + kfree(rt2x00dev->csr.cache); + rt2x00dev->csr.cache = NULL; } static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) { - rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); - if (!rt2x00dev->csr_cache) + rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); + if (!rt2x00dev->csr.cache) goto exit; rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); @@ -627,9 +694,9 @@ EXPORT_SYMBOL_GPL(rt2x00usb_resume); #endif /* CONFIG_PM */ /* - * rt2x00pci module information. + * rt2x00usb module information. */ MODULE_AUTHOR(DRV_PROJECT); MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 library"); +MODULE_DESCRIPTION("rt2x00 usb library"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index e40df4050cd..11e55180cba 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -60,34 +60,47 @@ #define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) #define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) -/* - * USB vendor commands. - */ -#define USB_DEVICE_MODE 0x01 -#define USB_SINGLE_WRITE 0x02 -#define USB_SINGLE_READ 0x03 -#define USB_MULTI_WRITE 0x06 -#define USB_MULTI_READ 0x07 -#define USB_EEPROM_WRITE 0x08 -#define USB_EEPROM_READ 0x09 -#define USB_LED_CONTROL 0x0a /* RT73USB */ -#define USB_RX_CONTROL 0x0c +/** + * enum rt2x00usb_vendor_request: USB vendor commands. + */ +enum rt2x00usb_vendor_request { + USB_DEVICE_MODE = 1, + USB_SINGLE_WRITE = 2, + USB_SINGLE_READ = 3, + USB_MULTI_WRITE = 6, + USB_MULTI_READ = 7, + USB_EEPROM_WRITE = 8, + USB_EEPROM_READ = 9, + USB_LED_CONTROL = 10, /* RT73USB */ + USB_RX_CONTROL = 12, +}; -/* - * Device modes offset +/** + * enum rt2x00usb_mode_offset: Device modes offset. */ -#define USB_MODE_RESET 0x01 -#define USB_MODE_UNPLUG 0x02 -#define USB_MODE_FUNCTION 0x03 -#define USB_MODE_TEST 0x04 -#define USB_MODE_SLEEP 0x07 /* RT73USB */ -#define USB_MODE_FIRMWARE 0x08 /* RT73USB */ -#define USB_MODE_WAKEUP 0x09 /* RT73USB */ +enum rt2x00usb_mode_offset { + USB_MODE_RESET = 1, + USB_MODE_UNPLUG = 2, + USB_MODE_FUNCTION = 3, + USB_MODE_TEST = 4, + USB_MODE_SLEEP = 7, /* RT73USB */ + USB_MODE_FIRMWARE = 8, /* RT73USB */ + USB_MODE_WAKEUP = 9, /* RT73USB */ +}; -/* - * Used to read/write from/to the device. +/** + * rt2x00usb_vendor_request - Send register command to device + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register offset to perform action on + * @value: Value to write to device + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * * This is the main function to communicate with the device, - * the buffer argument _must_ either be NULL or point to + * the &buffer argument _must_ either be NULL or point to * a buffer allocated by kmalloc. Failure to do so can lead * to unexpected behavior depending on the architecture. */ @@ -97,13 +110,21 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout); -/* - * Used to read/write from/to the device. +/** + * rt2x00usb_vendor_request_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * * This function will use a previously with kmalloc allocated cache * to communicate with the device. The contents of the buffer pointer * will be copied to this cache when writing, or read from the cache * when reading. - * Buffers send to rt2x00usb_vendor_request _must_ be allocated with + * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with * kmalloc. Hence the reason for using a previously allocated cache * which has been allocated properly. */ @@ -112,15 +133,32 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, const u16 offset, void *buffer, const u16 buffer_length, const int timeout); -/* - * A version of rt2x00usb_vendor_request_buff which must be called - * if the usb_cache_mutex is already held. */ +/** + * rt2x00usb_vendor_request_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * + * A version of &rt2x00usb_vendor_request_buff which must be called + * if the usb_cache_mutex is already held. + */ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, const u16 offset, void *buffer, const u16 buffer_length, const int timeout); -/* +/** + * rt2x00usb_vendor_request_sw - Send single register command to device + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @offset: Register offset to perform action on + * @value: Value to write to device + * @timeout: Operation timeout + * * Simple wrapper around rt2x00usb_vendor_request to write a single * command to the device. Since we don't use the buffer argument we * don't have to worry about kmalloc here. @@ -136,7 +174,12 @@ static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev, value, NULL, 0, timeout); } -/* +/** + * rt2x00usb_eeprom_read - Read eeprom from device + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @eeprom: Pointer to eeprom array to store the information in + * @length: Number of bytes to read from the eeprom + * * Simple wrapper around rt2x00usb_vendor_request to read the eeprom * from the device. Note that the eeprom argument _must_ be allocated using * kmalloc for correct handling inside the kernel USB layer. @@ -147,8 +190,8 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, - USB_VENDOR_REQUEST_IN, 0x0000, - 0x0000, eeprom, lenght, timeout); + USB_VENDOR_REQUEST_IN, 0, 0, + eeprom, lenght, timeout); } /* @@ -160,16 +203,58 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); * TX data handlers. */ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control); +/** + * struct queue_entry_priv_usb_rx: Per RX entry USB specific information + * + * @urb: Urb structure used for device communication. + */ +struct queue_entry_priv_usb_rx { + struct urb *urb; +}; + +/** + * struct queue_entry_priv_usb_tx: Per TX entry USB specific information + * + * @urb: Urb structure used for device communication. + * @control: mac80211 control structure used to transmit data. + */ +struct queue_entry_priv_usb_tx { + struct urb *urb; + + struct ieee80211_tx_control control; +}; + +/** + * struct queue_entry_priv_usb_tx: Per TX entry USB specific information + * + * The first section should match &struct queue_entry_priv_usb_tx exactly. + * rt2500usb can use this structure to send a guardian byte when working + * with beacons. + * + * @urb: Urb structure used for device communication. + * @control: mac80211 control structure used to transmit data. + * @guardian_data: Set to 0, used for sending the guardian data. + * @guardian_urb: Urb structure used to send the guardian data. + */ +struct queue_entry_priv_usb_bcn { + struct urb *urb; + + struct ieee80211_tx_control control; + + unsigned int guardian_data; + struct urb *guardian_urb; +}; + /* * Device initialization handlers. */ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index ad2e7d53b3d..468a31c8c11 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -24,6 +24,7 @@ Supported chipsets: RT2561, RT2561s, RT2661. */ +#include <linux/crc-itu-t.h> #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/init.h> @@ -155,6 +156,12 @@ rf_write: rt2x00_rf_write(rt2x00dev, word, value); } +#ifdef CONFIG_RT61PCI_LEDS +/* + * This function is only called from rt61pci_led_brightness() + * make gcc happy by placing this function inside the + * same ifdef statement as the caller. + */ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) @@ -181,6 +188,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); } +#endif /* CONFIG_RT61PCI_LEDS */ static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { @@ -262,82 +270,162 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) u32 reg; rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); - return rt2x00_get_field32(reg, MAC_CSR13_BIT5);; + return rt2x00_get_field32(reg, MAC_CSR13_BIT5); } #else #define rt61pci_rfkill_poll NULL #endif /* CONFIG_RT61PCI_RFKILL */ -/* - * Configuration handlers. - */ -static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) +#ifdef CONFIG_RT61PCI_LEDS +static void rt61pci_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int a_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + + if (led->type == LED_TYPE_RADIO) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_RADIO_STATUS, enabled); + + rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, + (led->rt2x00dev->led_mcu_reg & 0xff), + ((led->rt2x00dev->led_mcu_reg >> 8))); + } else if (led->type == LED_TYPE_ASSOC) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_BG_STATUS, bg_mode); + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_A_STATUS, a_mode); + + rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, + (led->rt2x00dev->led_mcu_reg & 0xff), + ((led->rt2x00dev->led_mcu_reg >> 8))); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * this means we need to convert the brightness + * argument into the matching level within that range. + */ + rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + brightness / (LED_FULL / 6), 0); + } } -static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) +static int rt61pci_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { - u32 tmp; + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); + rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, ®); + rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); + rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg); - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); + return 0; } +#endif /* CONFIG_RT61PCI_LEDS */ -static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +/* + * Configuration handlers. + */ +static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) { u32 reg; /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); +} - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, - (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); +static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) +{ + unsigned int beacon_base; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00pci_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + } + + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); + conf->bssid[1] = cpu_to_le32(reg); + + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, + conf->bssid, sizeof(conf->bssid)); + } } -static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) { u32 reg; rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout); + rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout); rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!short_preamble); + !!erp->short_preamble); rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); } @@ -427,27 +515,21 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - (rt2x00dev->curr_hwmode != HWMODE_A)); + (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ)); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); @@ -486,14 +568,8 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); break; @@ -531,10 +607,6 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, rt61pci_bbp_read(rt2x00dev, 4, &r4); rt61pci_bbp_read(rt2x00dev, 77, &r77); - /* FIXME: Antenna selection for the rf 2529 is very confusing in the - * legacy driver. The code below should be ok for non-diversity setups. - */ - /* * Configure the RX antenna. */ @@ -544,15 +616,14 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); break; - case ANTENNA_SW_DIVERSITY: case ANTENNA_HW_DIVERSITY: /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. + * FIXME: Antenna selection for the rf 2529 is very confusing + * in the legacy driver. Just default to antenna B until the + * legacy code can be properly translated into rt2x00 code. */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); @@ -603,7 +674,14 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, unsigned int i; u32 reg; - if (rt2x00dev->curr_hwmode == HWMODE_A) { + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); } else { @@ -617,10 +695,9 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - (rt2x00dev->curr_hwmode == HWMODE_B || - rt2x00dev->curr_hwmode == HWMODE_G)); + rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - (rt2x00dev->curr_hwmode == HWMODE_A)); + rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg); @@ -667,8 +744,8 @@ static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt61pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); @@ -684,78 +761,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, } /* - * LED functions. - */ -static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u8 arg0; - u8 arg1; - - rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); - rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, - (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, - (rt2x00dev->rx_status.phymode != MODE_IEEE80211A)); - - arg0 = rt2x00dev->led_reg & 0xff; - arg1 = (rt2x00dev->led_reg >> 8) & 0xff; - - rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); -} - -static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 led_reg; - u8 arg0; - u8 arg1; - - led_reg = rt2x00dev->led_reg; - rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0); - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0); - - arg0 = led_reg & 0xff; - arg1 = (led_reg >> 8) & 0xff; - - rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); -} - -static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) -{ - u8 led; - - if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - if (rssi <= 30) - led = 0; - else if (rssi <= 39) - led = 1; - else if (rssi <= 49) - led = 2; - else if (rssi <= 53) - led = 3; - else if (rssi <= 63) - led = 4; - else - led = 5; - - rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0); -} - -/* * Link tuning */ static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev, @@ -789,17 +794,12 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) u8 up_bound; u8 low_bound; - /* - * Update Led strength - */ - rt61pci_activity_led(rt2x00dev, rssi); - rt61pci_bbp_read(rt2x00dev, 17, &r17); /* * Determine r17 bounds. */ - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { @@ -816,6 +816,13 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) } /* + * If we are not associated, we should go straight to the + * dynamic CCA tuning. + */ + if (!rt2x00dev->intf_associated) + goto dynamic_cca_tune; + + /* * Special big-R17 for very short distance */ if (rssi >= -35) { @@ -866,6 +873,8 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) return; } +dynamic_cca_tune: + /* * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. @@ -882,7 +891,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) } /* - * Firmware name function. + * Firmware functions */ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) { @@ -906,9 +915,23 @@ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) return fw_name; } -/* - * Initialization functions. - */ +static u16 rt61pci_get_firmware_crc(void *data, const size_t len) +{ + u16 crc; + + /* + * Use the crc itu-t algorithm. + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + crc = crc_itu_t(0, data, len - 2); + crc = crc_itu_t_byte(crc, 0); + crc = crc_itu_t_byte(crc, 0); + + return crc; +} + static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, const size_t len) { @@ -989,50 +1012,55 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, return 0; } +/* + * Initialization functions. + */ static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word; - rt2x00_desc_read(rxd, 5, &word); + rt2x00_desc_read(priv_rx->desc, 5, &word); rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - entry->data_dma); - rt2x00_desc_write(rxd, 5, word); + priv_rx->data_dma); + rt2x00_desc_write(priv_rx->desc, 5, word); - rt2x00_desc_read(rxd, 0, &word); + rt2x00_desc_read(priv_rx->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); + rt2x00_desc_write(priv_rx->desc, 0, word); } static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry) + struct queue_entry *entry) { - __le32 *txd = entry->priv; + struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; u32 word; - rt2x00_desc_read(txd, 1, &word); + rt2x00_desc_read(priv_tx->desc, 1, &word); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); - rt2x00_desc_write(txd, 1, word); + rt2x00_desc_write(priv_tx->desc, 1, word); - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->ring->queue_idx); + rt2x00_desc_read(priv_tx->desc, 5, &word); + rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx); - rt2x00_desc_write(txd, 5, word); + rt2x00_desc_write(priv_tx->desc, 5, word); - rt2x00_desc_read(txd, 6, &word); + rt2x00_desc_read(priv_tx->desc, 6, &word); rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - entry->data_dma); - rt2x00_desc_write(txd, 6, word); + priv_tx->data_dma); + rt2x00_desc_write(priv_tx->desc, 6, word); - rt2x00_desc_read(txd, 0, &word); + rt2x00_desc_read(priv_tx->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); + rt2x00_desc_write(priv_tx->desc, 0, word); } -static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) +static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) { + struct queue_entry_priv_pci_rx *priv_rx; + struct queue_entry_priv_pci_tx *priv_tx; u32 reg; /* @@ -1040,59 +1068,55 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) */ rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®); rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); + rt2x00dev->tx[0].limit); rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); + rt2x00dev->tx[1].limit); rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit); + rt2x00dev->tx[2].limit); rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit); + rt2x00dev->tx[3].limit); rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg); rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®); - rt2x00_set_field32(®, TX_RING_CSR1_MGMT_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit); rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size / - 4); + rt2x00dev->tx[0].desc_size / 4); rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); + priv_tx = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); + priv_tx = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); + priv_tx = rt2x00dev->tx[2].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); + priv_tx = rt2x00dev->tx[3].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma); + priv_tx->desc_dma); rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); - rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, ®); - rt2x00_set_field32(®, MGMT_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma); - rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg); - rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); - rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, - rt2x00dev->rx->stats.limit); + rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit); rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, rt2x00dev->rx->desc_size / 4); rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); + priv_rx = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, - rt2x00dev->rx->data_dma); + priv_rx->desc_dma); rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); @@ -1100,7 +1124,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_MGMT, 0); rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); @@ -1108,7 +1131,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1); rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); @@ -1224,6 +1246,17 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. @@ -1296,19 +1329,15 @@ continue_csr_init: rt61pci_bbp_write(rt2x00dev, 102, 0x16); rt61pci_bbp_write(rt2x00dev, 107, 0x04); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt61pci_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -1375,7 +1404,7 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt61pci_init_rings(rt2x00dev) || + if (rt61pci_init_queues(rt2x00dev) || rt61pci_init_registers(rt2x00dev) || rt61pci_init_bbp(rt2x00dev)) { ERROR(rt2x00dev, "Register initialization failed.\n"); @@ -1394,11 +1423,6 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); - /* - * Enable LED - */ - rt61pci_enable_led(rt2x00dev); - return 0; } @@ -1406,11 +1430,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - /* - * Disable LED - */ - rt61pci_disable_led(rt2x00dev); - rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); /* @@ -1426,7 +1445,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_MGMT, 1); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); /* @@ -1508,10 +1526,10 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1519,50 +1537,52 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); - rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); + rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(control->power_level)); + TXPOWER_TO_DEV(rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); - rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len); - rt2x00_desc_write(txd, 11, word); + if (skbdesc->desc_len > TXINFO_SIZE) { + rt2x00_desc_read(txd, 11, &word); + rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len); + rt2x00_desc_write(txd, 11, word); + } rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); rt2x00_set_field32(&word, TXD_W0_VALID, 1); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, !!(control->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)); rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &desc->flags)); + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1571,11 +1591,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u32 reg; - if (queue == IEEE80211_TX_QUEUE_BEACON) { + if (queue == RT2X00_BCN_QUEUE_BEACON) { /* * For Wi-Fi faily generated beacons between participating * stations. Set TBTT phase adaptive adjustment step to 8us. @@ -1584,6 +1604,8 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); } @@ -1599,8 +1621,6 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, (queue == IEEE80211_TX_QUEUE_DATA2)); rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == IEEE80211_TX_QUEUE_DATA3)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, - (queue == IEEE80211_TX_QUEUE_DATA4)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } @@ -1628,7 +1648,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) offset += 14; @@ -1648,28 +1668,35 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; } -static void rt61pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt61pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - __le32 *rxd = entry->priv; + struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word0; u32 word1; - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); + rt2x00_desc_read(priv_rx->desc, 0, &word0); + rt2x00_desc_read(priv_rx->desc, 1, &word1); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; /* * Obtain the status about this packet. - */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1); - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. + */ + rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = 0; + if (rt2x00_get_field32(word0, RXD_W0_OFDM)) + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; } /* @@ -1677,17 +1704,16 @@ static void rt61pci_fill_rxdone(struct data_entry *entry, */ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) { - struct data_ring *ring; - struct data_entry *entry; - struct data_entry *entry_done; - __le32 *txd; + struct data_queue *queue; + struct queue_entry *entry; + struct queue_entry *entry_done; + struct queue_entry_priv_pci_tx *priv_tx; + struct txdone_entry_desc txdesc; u32 word; u32 reg; u32 old_reg; int type; int index; - int tx_status; - int retry; /* * During each loop we will compare the freshly read @@ -1710,11 +1736,11 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) /* * Skip this entry when it contains an invalid - * ring identication number. + * queue identication number. */ type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); - ring = rt2x00lib_get_ring(rt2x00dev, type); - if (unlikely(!ring)) + queue = rt2x00queue_get_queue(rt2x00dev, type); + if (unlikely(!queue)) continue; /* @@ -1722,36 +1748,40 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) * index number. */ index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); - if (unlikely(index >= ring->stats.limit)) + if (unlikely(index >= queue->limit)) continue; - entry = &ring->entry[index]; - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); + entry = &queue->entries[index]; + priv_tx = entry->priv_data; + rt2x00_desc_read(priv_tx->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) return; - entry_done = rt2x00_get_data_entry_done(ring); + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); while (entry != entry_done) { - /* Catch up. Just report any entries we missed as - * failed. */ + /* Catch up. + * Just report any entries we missed as failed. + */ WARNING(rt2x00dev, - "TX status report missed for entry %p\n", - entry_done); - rt2x00pci_txdone(rt2x00dev, entry_done, TX_FAIL_OTHER, - 0); - entry_done = rt2x00_get_data_entry_done(ring); + "TX status report missed for entry %d\n", + entry_done->entry_idx); + + txdesc.status = TX_FAIL_OTHER; + txdesc.retry = 0; + + rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc); + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } /* * Obtain the status about this packet. */ - tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); - retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); + txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); + txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry); + rt2x00pci_txdone(rt2x00dev, entry, &txdesc); } } @@ -1906,7 +1936,7 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); } else { value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); if (value < -10 || value > 10) @@ -2035,35 +2065,61 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * If the eeprom value is invalid, * switch to default led mode. */ +#ifdef CONFIG_RT61PCI_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); + value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); + + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt61pci_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt61pci_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; + rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; + rt2x00dev->led_assoc.led_dev.brightness_set = + rt61pci_brightness_set; + rt2x00dev->led_assoc.led_dev.blink_set = + rt61pci_blink_set; + rt2x00dev->led_assoc.flags = LED_INITIALIZED; + + if (value == LED_MODE_SIGNAL_STRENGTH) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_QUALITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt61pci_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt61pci_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } - rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, - rt2x00dev->led_mode); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); +#endif /* CONFIG_RT61PCI_LEDS */ return 0; } @@ -2197,7 +2253,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = 0; rt2x00dev->hw->max_signal = MAX_SIGNAL; rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 5; + rt2x00dev->hw->queues = 4; SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -2214,8 +2270,8 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 2; - spec->num_rates = 12; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -2230,7 +2286,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) if (rt2x00_rf(&rt2x00dev->chip, RF5225) || rt2x00_rf(&rt2x00dev->chip, RF5325)) { - spec->num_modes = 3; + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_seq); txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); @@ -2262,7 +2318,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt61pci_probe_hw_mode(rt2x00dev); /* - * This device requires firmware + * This device requires firmware. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); @@ -2277,70 +2333,6 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt61pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Multicast filter seems to kill broadcast traffic so never use it. - */ - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); -} - static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, u32 short_retry, u32 long_retry) { @@ -2369,66 +2361,72 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static void rt61pci_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0); -} - static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct skb_desc *desc; - struct data_ring *ring; - struct data_entry *entry; + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct skb_frame_desc *skbdesc; + unsigned int beacon_base; + u32 reg; - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - entry = rt2x00_get_data_entry(ring); + if (unlikely(!intf->beacon)) + return -ENOBUFS; /* * We need to append the descriptor in front of the * beacon frame. */ - if (skb_headroom(skb) < TXD_DESC_SIZE) { - if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) + if (skb_headroom(skb) < intf->beacon->queue->desc_size) { + if (pskb_expand_head(skb, intf->beacon->queue->desc_size, + 0, GFP_ATOMIC)) return -ENOMEM; } /* * Add the descriptor in front of the skb. */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); + skb_push(skb, intf->beacon->queue->desc_size); + memset(skb->data, 0, intf->beacon->queue->desc_size); /* * Fill in skb descriptor */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len - ring->desc_size; - desc->desc = skb->data; - desc->data = skb->data + ring->desc_size; - desc->ring = ring; - desc->entry = entry; + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data + intf->beacon->queue->desc_size; + skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; + skbdesc->desc = skb->data; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + /* + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. + */ + control->queue = RT2X00_BCN_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00pci_register_multiwrite(rt2x00dev, beacon_base, skb->data, skb->len); - rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + rt61pci_kick_tx_queue(rt2x00dev, control->queue); return 0; } @@ -2441,14 +2439,13 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt61pci_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt61pci_get_tsf, - .reset_tsf = rt61pci_reset_tsf, .beacon_update = rt61pci_beacon_update, }; @@ -2456,6 +2453,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .irq_handler = rt61pci_interrupt, .probe_hw = rt61pci_probe_hw, .get_firmware_name = rt61pci_get_firmware_name, + .get_firmware_crc = rt61pci_get_firmware_crc, .load_firmware = rt61pci_load_firmware, .initialize = rt2x00pci_initialize, .uninitialize = rt2x00pci_uninitialize, @@ -2470,19 +2468,42 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, - .config_mac_addr = rt61pci_config_mac_addr, - .config_bssid = rt61pci_config_bssid, - .config_type = rt61pci_config_type, - .config_preamble = rt61pci_config_preamble, + .config_filter = rt61pci_config_filter, + .config_intf = rt61pci_config_intf, + .config_erp = rt61pci_config_erp, .config = rt61pci_config, }; +static const struct data_queue_desc rt61pci_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_rx), +}; + +static const struct data_queue_desc rt61pci_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + +static const struct data_queue_desc rt61pci_queue_bcn = { + .entry_num = 4 * BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXINFO_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci_tx), +}; + static const struct rt2x00_ops rt61pci_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt61pci_queue_rx, + .tx = &rt61pci_queue_tx, + .bcn = &rt61pci_queue_bcn, .lib = &rt61pci_rt2x00_ops, .hw = &rt61pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 4c6524eedad..3511bba7ff6 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -161,7 +161,9 @@ struct hw_pairwise_ta_entry { #define HW_BEACON_BASE1 0x2d00 #define HW_BEACON_BASE2 0x2e00 #define HW_BEACON_BASE3 0x2f00 -#define HW_BEACON_OFFSET 0x0100 + +#define HW_BEACON_OFFSET(__index) \ + ( HW_BEACON_BASE0 + (__index * 0x0100) ) /* * HOST-MCU shared memory. @@ -234,6 +236,11 @@ struct hw_pairwise_ta_entry { /* * MAC_CSR3: STA MAC register 1. + * UNICAST_TO_ME_MASK: + * Used to mask off bits from byte 5 of the MAC address + * to determine the UNICAST_TO_ME bit for RX frames. + * The full mask is complemented by BSS_ID_MASK: + * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK */ #define MAC_CSR3 0x300c #define MAC_CSR3_BYTE4 FIELD32(0x000000ff) @@ -251,7 +258,14 @@ struct hw_pairwise_ta_entry { /* * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID. + * BSS_ID_MASK: + * This mask is used to mask off bits 0 and 1 of byte 5 of the + * BSSID. This will make sure that those bits will be ignored + * when determining the MY_BSS of RX frames. + * 0: 1-BSSID mode (BSS index = 0) + * 1: 2-BSSID mode (BSS index: Byte5, bit 0) + * 2: 2-BSSID mode (BSS index: byte5, bit 1) + * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1) */ #define MAC_CSR5 0x3014 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff) @@ -391,7 +405,7 @@ struct hw_pairwise_ta_entry { #define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) #define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) #define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) -#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000) +#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000) #define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) #define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) @@ -866,7 +880,7 @@ struct hw_pairwise_ta_entry { #define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000) /* - * LOAD_TX_RING_CSR: Load RX de + * LOAD_TX_RING_CSR: Load RX desriptor */ #define LOAD_TX_RING_CSR 0x3434 #define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001) @@ -1116,10 +1130,10 @@ struct hw_pairwise_ta_entry { #define EEPROM_MAC_ADDR_0 0x0002 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0004 +#define EEPROM_MAC_ADDR1 0x0003 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0006 +#define EEPROM_MAC_ADDR_2 0x0004 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) @@ -1247,6 +1261,7 @@ struct hw_pairwise_ta_entry { * DMA descriptor defines. */ #define TXD_DESC_SIZE ( 16 * sizeof(__le32) ) +#define TXINFO_SIZE ( 6 * sizeof(__le32) ) #define RXD_DESC_SIZE ( 16 * sizeof(__le32) ) /* @@ -1440,8 +1455,8 @@ struct hw_pairwise_ta_entry { #define RXD_W15_RESERVED FIELD32(0xffffffff) /* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. + * Macro's for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. */ #define MIN_TXPOWER 0 #define MAX_TXPOWER 31 diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 3909cf42f47..a9efe25f1ea 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -24,6 +24,7 @@ Supported chipsets: rt2571W & rt2671. */ +#include <linux/crc-itu-t.h> #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/init.h> @@ -278,85 +279,158 @@ static const struct rt2x00debug rt73usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -/* - * Configuration handlers. - */ -static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) +#ifdef CONFIG_RT73USB_LEDS +static void rt73usb_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) { - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int a_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + + if (led->type == LED_TYPE_RADIO) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_RADIO_STATUS, enabled); + + rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, + 0, led->rt2x00dev->led_mcu_reg, + REGISTER_TIMEOUT); + } else if (led->type == LED_TYPE_ASSOC) { + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_BG_STATUS, bg_mode); + rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg, + MCU_LEDCS_LINK_A_STATUS, a_mode); + + rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, + 0, led->rt2x00dev->led_mcu_reg, + REGISTER_TIMEOUT); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * this means we need to convert the brightness + * argument into the matching level within that range. + */ + rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, + brightness / (LED_FULL / 6), + led->rt2x00dev->led_mcu_reg, + REGISTER_TIMEOUT); + } } -static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) +static int rt73usb_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) { - u32 tmp; + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); + rt73usb_register_read(led->rt2x00dev, MAC_CSR14, ®); + rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); + rt73usb_register_write(led->rt2x00dev, MAC_CSR14, reg); - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); + return 0; } +#endif /* CONFIG_RT73USB_LEDS */ -static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) +/* + * Configuration handlers. + */ +static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) { u32 reg; /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - - /* - * Enable synchronisation. + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, - (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, + !(filter_flags & FIF_PROMISC_IN_BSS) && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); + rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, + !(filter_flags & FIF_CONTROL)); + rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); } -static void rt73usb_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) { + unsigned int beacon_base; u32 reg; - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->config_work); - return; + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt73usb_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); } + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); + conf->bssid[1] = cpu_to_le32(reg); + + rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, + conf->bssid, sizeof(conf->bssid)); + } +} + +static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_erp *erp) +{ + u32 reg; + rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout); + rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout); rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!short_preamble); + !!erp->short_preamble); rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); } @@ -442,28 +516,22 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2); temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags) - && (rt2x00dev->curr_hwmode != HWMODE_A); + && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - if (rt2x00dev->curr_hwmode == HWMODE_A) + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); else rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); @@ -501,14 +569,8 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3); rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); break; - case ANTENNA_SW_DIVERSITY: - /* - * NOTE: We should never come here because rt2x00lib is - * supposed to catch this and send us the correct antenna - * explicitely. However we are nog going to bug about this. - * Instead, just default to antenna B. - */ case ANTENNA_B: + default: rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0); rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1); break; @@ -558,7 +620,14 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, unsigned int i; u32 reg; - if (rt2x00dev->curr_hwmode == HWMODE_A) { + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) { sel = antenna_sel_a; lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); } else { @@ -572,10 +641,9 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, rt73usb_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, - (rt2x00dev->curr_hwmode == HWMODE_B || - rt2x00dev->curr_hwmode == HWMODE_G)); + (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, - (rt2x00dev->curr_hwmode == HWMODE_A)); + (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)); rt73usb_register_write(rt2x00dev, PHY_CSR0, reg); @@ -617,8 +685,8 @@ static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt73usb_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt73usb_config_phymode(rt2x00dev, libconf->basic_rates); @@ -634,68 +702,6 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev, } /* - * LED functions. - */ -static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt73usb_register_read(rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); - rt73usb_register_write(rt2x00dev, MAC_CSR14, reg); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, - (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, - (rt2x00dev->rx_status.phymode != MODE_IEEE80211A)); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev) -{ - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) -{ - u32 led; - - if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - if (rssi <= 30) - led = 0; - else if (rssi <= 39) - led = 1; - else if (rssi <= 49) - led = 2; - else if (rssi <= 53) - led = 3; - else if (rssi <= 63) - led = 4; - else - led = 5; - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -/* * Link tuning */ static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev, @@ -729,17 +735,12 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) u8 up_bound; u8 low_bound; - /* - * Update Led strength - */ - rt73usb_activity_led(rt2x00dev, rssi); - rt73usb_bbp_read(rt2x00dev, 17, &r17); /* * Determine r17 bounds. */ - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { low_bound = 0x28; up_bound = 0x48; @@ -766,6 +767,13 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) } /* + * If we are not associated, we should go straight to the + * dynamic CCA tuning. + */ + if (!rt2x00dev->intf_associated) + goto dynamic_cca_tune; + + /* * Special big-R17 for very short distance */ if (rssi > -35) { @@ -815,6 +823,8 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) return; } +dynamic_cca_tune: + /* * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. @@ -833,16 +843,30 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) } /* - * Firmware name function. + * Firmware functions */ static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) { return FIRMWARE_RT2571; } -/* - * Initialization functions. - */ +static u16 rt73usb_get_firmware_crc(void *data, const size_t len) +{ + u16 crc; + + /* + * Use the crc itu-t algorithm. + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + crc = crc_itu_t(0, data, len - 2); + crc = crc_itu_t_byte(crc, 0); + crc = crc_itu_t_byte(crc, 0); + + return crc; +} + static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, const size_t len) { @@ -889,7 +913,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0x0000, + FIRMWARE_IMAGE_BASE + i, 0, cache, buflen, timeout); ptr += buflen; @@ -902,18 +926,19 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, * we need to specify a long timeout time. */ status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, - 0x0000, USB_MODE_FIRMWARE, + 0, USB_MODE_FIRMWARE, REGISTER_TIMEOUT_FIRMWARE); if (status < 0) { ERROR(rt2x00dev, "Failed to write Firmware to device.\n"); return status; } - rt73usb_disable_led(rt2x00dev); - return 0; } +/* + * Initialization functions. + */ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -1021,6 +1046,17 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. @@ -1094,19 +1130,15 @@ continue_csr_init: rt73usb_bbp_write(rt2x00dev, 102, 0x16); rt73usb_bbp_write(rt2x00dev, 107, 0x04); - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); rt73usb_bbp_write(rt2x00dev, reg_id, value); } } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); return 0; } @@ -1136,21 +1168,11 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) return -EIO; } - /* - * Enable LED - */ - rt73usb_enable_led(rt2x00dev); - return 0; } static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - /* - * Disable LED - */ - rt73usb_disable_led(rt2x00dev); - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); /* @@ -1234,10 +1256,10 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control) { - struct skb_desc *skbdesc = get_skb_desc(skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; u32 word; @@ -1245,47 +1267,47 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); - rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); + rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue); + rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); + rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); + rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); + rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal); + rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low); + rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(control->power_level)); + TXPOWER_TO_DEV(rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &desc->flags)); + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_VALID, 1); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &desc->flags)); + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); + test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, !!(control->flags & IEEE80211_TXCTL_LONG_RETRY_LIMIT)); rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); rt2x00_set_field32(&word, TXD_W0_BURST2, - test_bit(ENTRY_TXD_BURST, &desc->flags)); + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1309,11 +1331,11 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) + const unsigned int queue) { u32 reg; - if (queue != IEEE80211_TX_QUEUE_BEACON) + if (queue != RT2X00_BCN_QUEUE_BEACON) return; /* @@ -1324,6 +1346,8 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); } @@ -1353,7 +1377,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return 0; } - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { + if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { if (lna == 3 || lna == 2) offset += 10; @@ -1377,37 +1401,62 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; } -static void rt73usb_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) +static void rt73usb_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) { - struct skb_desc *skbdesc = get_skb_desc(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = (__le32 *)entry->skb->data; + unsigned int offset = entry->queue->desc_size + 2; u32 word0; u32 word1; + /* + * Copy descriptor to the available headroom inside the skbuffer. + */ + skb_push(entry->skb, offset); + memcpy(entry->skb->data, rxd, entry->queue->desc_size); + rxd = (__le32 *)entry->skb->data; + + /* + * The descriptor is now aligned to 4 bytes and thus it is + * now safe to read it on all architectures. + */ rt2x00_desc_read(rxd, 0, &word0); rt2x00_desc_read(rxd, 1, &word1); - desc->flags = 0; + rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1); - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); + rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); + + rxdesc->dev_flags = 0; + if (rt2x00_get_field32(word0, RXD_W0_OFDM)) + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; + + /* + * Adjust the skb memory window to the frame boundaries. + */ + skb_pull(entry->skb, offset + entry->queue->desc_size); + skb_trim(entry->skb, rxdesc->size); /* * Set descriptor and data pointer. */ - skbdesc->desc = entry->skb->data; - skbdesc->desc_len = entry->ring->desc_size; - skbdesc->data = entry->skb->data + entry->ring->desc_size; - skbdesc->data_len = desc->size; + skbdesc->data = entry->skb->data; + skbdesc->data_len = rxdesc->size; + skbdesc->desc = rxd; + skbdesc->desc_len = entry->queue->desc_size; } /* @@ -1499,7 +1548,7 @@ static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); + EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word); } else { value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); if (value < -10 || value > 10) @@ -1577,33 +1626,60 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led settings, for correct led behaviour. */ +#ifdef CONFIG_RT73USB_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, - rt2x00dev->led_mode); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, + rt2x00dev->led_radio.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_RADIO; + rt2x00dev->led_radio.led_dev.brightness_set = + rt73usb_brightness_set; + rt2x00dev->led_radio.led_dev.blink_set = + rt73usb_blink_set; + rt2x00dev->led_radio.flags = LED_INITIALIZED; + + rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; + rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; + rt2x00dev->led_assoc.led_dev.brightness_set = + rt73usb_brightness_set; + rt2x00dev->led_assoc.led_dev.blink_set = + rt73usb_blink_set; + rt2x00dev->led_assoc.flags = LED_INITIALIZED; + + if (value == LED_MODE_SIGNAL_STRENGTH) { + rt2x00dev->led_qual.rt2x00dev = rt2x00dev; + rt2x00dev->led_radio.type = LED_TYPE_QUALITY; + rt2x00dev->led_qual.led_dev.brightness_set = + rt73usb_brightness_set; + rt2x00dev->led_qual.led_dev.blink_set = + rt73usb_blink_set; + rt2x00dev->led_qual.flags = LED_INITIALIZED; + } + + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, + rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); +#endif /* CONFIG_RT73USB_LEDS */ return 0; } @@ -1759,7 +1835,7 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; rt2x00dev->hw->max_signal = MAX_SIGNAL; rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 5; + rt2x00dev->hw->queues = 4; SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -1776,8 +1852,8 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->num_modes = 2; - spec->num_rates = 12; + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; spec->tx_power_a = NULL; spec->tx_power_bg = txpower; spec->tx_power_default = DEFAULT_TXPOWER; @@ -1786,20 +1862,20 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); spec->channels = rf_vals_bg_2528; } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5226); spec->channels = rf_vals_5226; } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) { spec->num_channels = 14; spec->channels = rf_vals_5225_2527; } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527); spec->channels = rf_vals_5225_2527; } if (rt2x00_rf(&rt2x00dev->chip, RF5225) || rt2x00_rf(&rt2x00dev->chip, RF5226)) { - spec->num_modes = 3; - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); for (i = 0; i < 14; i++) txpower[i] = TXPOWER_FROM_DEV(txpower[i]); @@ -1829,9 +1905,10 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) rt73usb_probe_hw_mode(rt2x00dev); /* - * This device requires firmware + * This device requires firmware. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1844,79 +1921,6 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static void rt73usb_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Multicast filter seems to kill broadcast traffic so never use it. - */ - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; - rt2x00dev->packet_filter = *total_flags; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); - return; - } - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); -} - static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, u32 short_retry, u32 long_retry) { @@ -1955,61 +1959,65 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) #define rt73usb_get_tsf NULL #endif -static void rt73usb_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0); -} - static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) + struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct skb_desc *desc; - struct data_ring *ring; - struct data_entry *entry; - int timeout; + struct rt2x00_intf *intf = vif_to_intf(control->vif); + struct skb_frame_desc *skbdesc; + unsigned int beacon_base; + unsigned int timeout; + u32 reg; - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - entry = rt2x00_get_data_entry(ring); + if (unlikely(!intf->beacon)) + return -ENOBUFS; /* * Add the descriptor in front of the skb. */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); + skb_push(skb, intf->beacon->queue->desc_size); + memset(skb->data, 0, intf->beacon->queue->desc_size); /* * Fill in skb descriptor */ - desc = get_skb_desc(skb); - desc->desc_len = ring->desc_size; - desc->data_len = skb->len - ring->desc_size; - desc->desc = skb->data; - desc->data = skb->data + ring->desc_size; - desc->ring = ring; - desc->entry = entry; + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + skbdesc->data = skb->data + intf->beacon->queue->desc_size; + skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; + skbdesc->desc = skb->data; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + + /* + * mac80211 doesn't provide the control->queue variable + * for beacons. Set our own queue identification so + * it can be used during descriptor initialization. + */ + control->queue = RT2X00_BCN_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32)); rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - HW_BEACON_BASE0, 0x0000, + USB_VENDOR_REQUEST_OUT, beacon_base, 0, skb->data, skb->len, timeout); - rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + rt73usb_kick_tx_queue(rt2x00dev, control->queue); return 0; } @@ -2022,20 +2030,20 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, - .configure_filter = rt73usb_configure_filter, + .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt73usb_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt73usb_get_tsf, - .reset_tsf = rt73usb_reset_tsf, .beacon_update = rt73usb_beacon_update, }; static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .probe_hw = rt73usb_probe_hw, .get_firmware_name = rt73usb_get_firmware_name, + .get_firmware_crc = rt73usb_get_firmware_crc, .load_firmware = rt73usb_load_firmware, .initialize = rt2x00usb_initialize, .uninitialize = rt2x00usb_uninitialize, @@ -2050,19 +2058,42 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt73usb_kick_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, - .config_mac_addr = rt73usb_config_mac_addr, - .config_bssid = rt73usb_config_bssid, - .config_type = rt73usb_config_type, - .config_preamble = rt73usb_config_preamble, + .config_filter = rt73usb_config_filter, + .config_intf = rt73usb_config_intf, + .config_erp = rt73usb_config_erp, .config = rt73usb_config, }; +static const struct data_queue_desc rt73usb_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_rx), +}; + +static const struct data_queue_desc rt73usb_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = DATA_FRAME_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_tx), +}; + +static const struct data_queue_desc rt73usb_queue_bcn = { + .entry_num = 4 * BEACON_ENTRIES, + .data_size = MGMT_FRAME_SIZE, + .desc_size = TXINFO_SIZE, + .priv_size = sizeof(struct queue_entry_priv_usb_tx), +}; + static const struct rt2x00_ops rt73usb_ops = { .name = KBUILD_MODNAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, + .max_sta_intf = 1, + .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .rx = &rt73usb_queue_rx, + .tx = &rt73usb_queue_tx, + .bcn = &rt73usb_queue_bcn, .lib = &rt73usb_rt2x00_ops, .hw = &rt73usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index d49dcaacece..06d687425fe 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -114,6 +114,9 @@ struct hw_pairwise_ta_entry { #define HW_BEACON_BASE2 0x2600 #define HW_BEACON_BASE3 0x2700 +#define HW_BEACON_OFFSET(__index) \ + ( HW_BEACON_BASE0 + (__index * 0x0100) ) + /* * MAC Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. @@ -146,6 +149,11 @@ struct hw_pairwise_ta_entry { /* * MAC_CSR3: STA MAC register 1. + * UNICAST_TO_ME_MASK: + * Used to mask off bits from byte 5 of the MAC address + * to determine the UNICAST_TO_ME bit for RX frames. + * The full mask is complemented by BSS_ID_MASK: + * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK */ #define MAC_CSR3 0x300c #define MAC_CSR3_BYTE4 FIELD32(0x000000ff) @@ -163,7 +171,14 @@ struct hw_pairwise_ta_entry { /* * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID. + * BSS_ID_MASK: + * This mask is used to mask off bits 0 and 1 of byte 5 of the + * BSSID. This will make sure that those bits will be ignored + * when determining the MY_BSS of RX frames. + * 0: 1-BSSID mode (BSS index = 0) + * 1: 2-BSSID mode (BSS index: Byte5, bit 0) + * 2: 2-BSSID mode (BSS index: byte5, bit 1) + * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1) */ #define MAC_CSR5 0x3014 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff) @@ -867,6 +882,7 @@ struct hw_pairwise_ta_entry { * DMA descriptor defines. */ #define TXD_DESC_SIZE ( 6 * sizeof(__le32) ) +#define TXINFO_SIZE ( 6 * sizeof(__le32) ) #define RXD_DESC_SIZE ( 6 * sizeof(__le32) ) /* @@ -1007,8 +1023,8 @@ struct hw_pairwise_ta_entry { #define RXD_W5_RESERVED FIELD32(0xffffffff) /* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. + * Macro's for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. */ #define MIN_TXPOWER 0 #define MAX_TXPOWER 31 |