summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00')
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c13
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h6
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c7
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h7
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c29
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.c36
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.c32
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.h22
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c56
12 files changed, 149 insertions, 67 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb21074..3078417b326 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
int pipe = usb_sndbulkpipe(usb_dev, 1);
int length;
u16 reg;
+ u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1130,6 +1131,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
skbdesc->desc = entry->skb->data;
/*
+ * Adjust the beacon databyte count. The current number is
+ * calculated before this function gets called, but falsely
+ * assumes that the descriptor was already present in the SKB.
+ */
+ rt2x00_desc_read(skbdesc->desc, 0, &word);
+ len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+ len += skbdesc->desc_len;
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+ rt2x00_desc_write(skbdesc->desc, 0, word);
+
+ /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1650,7 +1662,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 07b03b3c7ef..db2dc976d83 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -108,7 +108,10 @@
#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
#define DIFS ( PIFS + SLOT_TIME )
#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
-#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define EIFS ( SIFS + DIFS + \
+ (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define SHORT_EIFS ( SIFS + SHORT_DIFS + \
+ (8 * (IEEE80211_HEADER + ACK_SIZE)) )
/*
* Chipset identification
@@ -597,6 +600,7 @@ enum rt2x00_flags {
DEVICE_STARTED_SUSPEND,
DEVICE_ENABLED_RADIO,
DEVICE_DISABLED_RADIO_HW,
+ DEVICE_DIRTY_CONFIG,
/*
* Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f20ca712504..3f89516e833 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -271,7 +271,7 @@ config:
libconf.sifs = SIFS;
libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
- libconf.eifs = EIFS;
+ libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
}
libconf.conf = conf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8c93eb8353b..f42283ad7b0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
rt2x00dev->intf_associated = 0;
__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+ __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
return 0;
}
@@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Reconfigure device.
*/
- rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
- if (!rt2x00dev->hw->conf.radio_enabled)
- rt2x00lib_disable_radio(rt2x00dev);
+ retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
+ if (retval)
+ goto exit;
/*
* Iterator over each active interface to
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index f2c9b0e79b5..c5fb3a72cf3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
- * rt2x00queue_free_skb - free a skb
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to free.
- */
-void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send
* @skb: The skb to send
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index f1dcbaa80c3..c3ee4ecba79 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
- rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ rts_info->control.hw_key = NULL;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
(struct ieee80211_rts *)(skb->data));
if (rt2x00queue_write_tx_frame(queue, skb)) {
+ dev_kfree_skb_any(skb);
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
}
@@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
enum data_queue_qid qid = skb_get_queue_mapping(skb);
- struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct data_queue *queue;
u16 frame_control;
@@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
}
}
- /*
- * XXX: This is as wrong as the old mac80211 code was,
- * due to beacons not getting sequence numbers assigned
- * properly.
- */
- if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
- intf->seqno += 0x10;
- ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
- }
-
if (rt2x00queue_write_tx_frame(queue, skb)) {
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_BUSY;
@@ -322,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
+ int force_reconfig;
/*
* Mac80211 might be calling this function while we are trying
@@ -341,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
}
- rt2x00lib_config(rt2x00dev, conf, 0);
+ /*
+ * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+ * been started and the configuration must be forced upon the hardware.
+ * Otherwise registers will not be intialized correctly and could
+ * result in non-working hardware because essential registers aren't
+ * initialized.
+ */
+ force_reconfig =
+ __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+ rt2x00lib_config(rt2x00dev, conf, force_reconfig);
/*
* Reenable RX only if the radio should be on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f442030f5a..3b27f6aa860 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
struct ieee80211_rate *rate =
ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -200,6 +201,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
}
/*
+ * Hardware should insert sequence counter.
+ * FIXME: We insert a software sequence counter first for
+ * hardware that doesn't support hardware sequence counting.
+ *
+ * This is wrong because beacons are not getting sequence
+ * numbers assigned properly.
+ *
+ * A secondary problem exists for drivers that cannot toggle
+ * sequence counting per-frame, since those will override the
+ * sequence counter given by mac80211.
+ */
+ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ spin_lock(&intf->lock);
+
+ if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+ intf->seqno += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+ spin_unlock(&intf->lock);
+
+ __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+ }
+
+ /*
* PLCP setup
* Length calculation depends on OFDM/CCK rate.
*/
@@ -466,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev)
if (!rt2x00dev->ops->lib->init_rxentry)
return;
- for (i = 0; i < queue->limit; i++)
+ for (i = 0; i < queue->limit; i++) {
+ queue->entries[i].flags = 0;
+
rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
&queue->entries[i]);
+ }
}
void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@@ -482,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
if (!rt2x00dev->ops->lib->init_txentry)
continue;
- for (i = 0; i < queue->limit; i++)
+ for (i = 0; i < queue->limit; i++) {
+ queue->entries[i].flags = 0;
+
rt2x00dev->ops->lib->init_txentry(rt2x00dev,
&queue->entries[i]);
+ }
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 8945945c892..a4a8c57004d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -199,6 +199,7 @@ struct txdone_entry_desc {
* @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
* @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
* @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
* @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
* @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
* @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -210,6 +211,7 @@ enum txentry_desc_flags {
ENTRY_TXD_RTS_FRAME,
ENTRY_TXD_CTS_FRAME,
ENTRY_TXD_OFDM_RATE,
+ ENTRY_TXD_GENERATE_SEQ,
ENTRY_TXD_FIRST_FRAGMENT,
ENTRY_TXD_MORE_FRAG,
ENTRY_TXD_REQ_TIMESTAMP,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83862e7f7ae..933e6cc9359 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+ const u8 request, const u8 requesttype,
+ const u16 offset, void *buffer,
+ const u16 buffer_length,
+ const int timeout)
+{
+ int status = 0;
+ unsigned char *tb;
+ u16 off, len, bsize;
+
+ mutex_lock(&rt2x00dev->usb_cache_mutex);
+
+ tb = buffer;
+ off = offset;
+ len = buffer_length;
+ while (len && !status) {
+ bsize = min_t(u16, CSR_CACHE_SIZE, len);
+ status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
+ requesttype, off, tb,
+ bsize, timeout);
+
+ tb += bsize;
+ len -= bsize;
+ off += bsize;
+ }
+
+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+
/*
* TX data handlers.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index aad794adf52..ee3875f894a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -70,8 +70,7 @@
/*
* Cache size
*/
-#define CSR_CACHE_SIZE 8
-#define CSR_CACHE_SIZE_FIRMWARE 64
+#define CSR_CACHE_SIZE 64
/*
* USB request types.
@@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
const u16 buffer_length, const int timeout);
/**
+ * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register start offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This function is used to transfer register data in blocks larger
+ * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
+ */
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+ const u8 request, const u8 requesttype,
+ const u16 offset, void *buffer,
+ const u16 buffer_length,
+ const int timeout);
+
+/**
* rt2x00usb_vendor_request_sw - Send single register command to device
* @rt2x00dev: Pointer to &struct rt2x00_dev
* @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f7c1f92c144..fbe2a652e01 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
- rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+ rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
rt2x00_desc_write(txd, 1, word);
@@ -2278,7 +2279,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = 0;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d383735ab8f..9761eaaa08b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
unsigned int i;
int status;
u32 reg;
- const char *ptr = data;
- char *cache;
- int buflen;
/*
* Wait for stable hardware.
@@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
/*
* Write firmware to device.
- * We setup a seperate cache for this action,
- * since we are going to write larger chunks of data
- * then normally used cache size.
*/
- cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
- if (!cache) {
- ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
- buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
-
- memcpy(cache, ptr, buflen);
-
- rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT,
- FIRMWARE_IMAGE_BASE + i, 0,
- cache, buflen,
- REGISTER_TIMEOUT32(buflen));
-
- ptr += buflen;
- }
-
- kfree(cache);
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ FIRMWARE_IMAGE_BASE,
+ data, len,
+ REGISTER_TIMEOUT32(len));
/*
* Send firmware request to device to load firmware,
@@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
- rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+ rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
@@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
+ u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
skbdesc->desc = entry->skb->data;
/*
+ * Adjust the beacon databyte count. The current number is
+ * calculated before this function gets called, but falsely
+ * assumes that the descriptor was already present in the SKB.
+ */
+ rt2x00_desc_read(skbdesc->desc, 0, &word);
+ len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+ len += skbdesc->desc_len;
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+ rt2x00_desc_write(skbdesc->desc, 0, word);
+
+ /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
- rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, beacon_base, 0,
- entry->skb->data, entry->skb->len,
- REGISTER_TIMEOUT32(entry->skb->len));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, beacon_base,
+ entry->skb->data, entry->skb->len,
+ REGISTER_TIMEOUT32(entry->skb->len));
/*
* Clean up the beacon skb.
@@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-09 07:26:58 +0000