diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
42 files changed, 6421 insertions, 4412 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index ed1f997e352..bf60689aaab 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,6 +1,6 @@ menuconfig RT2X00 tristate "Ralink driver support" - depends on MAC80211 && WLAN_80211 + depends on MAC80211 ---help--- This will enable the support for the Ralink drivers, developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. @@ -53,6 +53,36 @@ config RT61PCI When compiled as a module, this driver will be called rt61pci. +config RT2800PCI_PCI + tristate + depends on PCI + default y + +config RT2800PCI_SOC + tristate + depends on RALINK_RT288X || RALINK_RT305X + default y + +config RT2800PCI + tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)" + depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL + select RT2800_LIB + select RT2X00_LIB_PCI if RT2800PCI_PCI + select RT2X00_LIB_SOC if RT2800PCI_SOC + select RT2X00_LIB_HT + select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO + select CRC_CCITT + select EEPROM_93CX6 + ---help--- + This adds support for rt2800 wireless chipset family. + Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052 + + This driver is non-functional at the moment and is intended for + developers. + + When compiled as a module, this driver will be called "rt2800pci.ko". + config RT2500USB tristate "Ralink rt2500 (USB) support" depends on USB @@ -78,8 +108,9 @@ config RT73USB When compiled as a module, this driver will be called rt73usb. config RT2800USB - tristate "Ralink rt2800 (USB) support" + tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)" depends on USB && EXPERIMENTAL + select RT2800_LIB select RT2X00_LIB_USB select RT2X00_LIB_HT select RT2X00_LIB_FIRMWARE @@ -89,12 +120,23 @@ config RT2800USB This adds experimental support for rt2800 wireless chipset family. Supported chips: RT2770, RT2870 & RT3070. + Known issues: + - support for RT2870 chips doesn't work with 802.11n APs yet + - support for RT3070 chips is non-functional at the moment + When compiled as a module, this driver will be called "rt2800usb.ko". +config RT2800_LIB + tristate + config RT2X00_LIB_PCI tristate select RT2X00_LIB +config RT2X00_LIB_SOC + tristate + select RT2X00_LIB + config RT2X00_LIB_USB tristate select RT2X00_LIB diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 13043ea9766..97133985829 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -11,10 +11,13 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o +obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o +obj-$(CONFIG_RT2800_LIB) += rt2800lib.o obj-$(CONFIG_RT2400PCI) += rt2400pci.o obj-$(CONFIG_RT2500PCI) += rt2500pci.o obj-$(CONFIG_RT61PCI) += rt61pci.o +obj-$(CONFIG_RT2800PCI) += rt2800pci.o obj-$(CONFIG_RT2500USB) += rt2500usb.o obj-$(CONFIG_RT73USB) += rt73usb.o obj-$(CONFIG_RT2800USB) += rt2800usb.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 798f625e38f..e7f46405a41 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -1341,6 +1341,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF2420) && !rt2x00_rf(&rt2x00dev->chip, RF2421)) { @@ -1431,7 +1432,6 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = 0; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -1622,20 +1622,21 @@ static const struct data_queue_desc rt2400pci_queue_atim = { }; static const struct rt2x00_ops rt2400pci_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt2400pci_queue_rx, - .tx = &rt2400pci_queue_tx, - .bcn = &rt2400pci_queue_bcn, - .atim = &rt2400pci_queue_atim, - .lib = &rt2400pci_rt2x00_ops, - .hw = &rt2400pci_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 1, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = 0, + .rx = &rt2400pci_queue_rx, + .tx = &rt2400pci_queue_tx, + .bcn = &rt2400pci_queue_bcn, + .atim = &rt2400pci_queue_atim, + .lib = &rt2400pci_rt2x00_ops, + .hw = &rt2400pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2400pci_rt2x00debug, + .debugfs = &rt2400pci_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index ccd644104ad..6c21ef66dfe 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 2e872ac6982..408fcfc120f 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -1505,6 +1505,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && !rt2x00_rf(&rt2x00dev->chip, RF2523) && @@ -1732,8 +1733,6 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, @@ -1921,20 +1920,21 @@ static const struct data_queue_desc rt2500pci_queue_atim = { }; static const struct rt2x00_ops rt2500pci_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt2500pci_queue_rx, - .tx = &rt2500pci_queue_tx, - .bcn = &rt2500pci_queue_bcn, - .atim = &rt2500pci_queue_atim, - .lib = &rt2500pci_rt2x00_ops, - .hw = &rt2500pci_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 1, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = 0, + .rx = &rt2500pci_queue_rx, + .tx = &rt2500pci_queue_tx, + .bcn = &rt2500pci_queue_bcn, + .atim = &rt2500pci_queue_atim, + .lib = &rt2500pci_rt2x00_ops, + .hw = &rt2500pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500pci_rt2x00debug, + .debugfs = &rt2500pci_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 54d37957883..b0075674c09 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 22dd6d9e298..83f2592c59d 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -716,139 +716,6 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev, } /* - * NOTE: This function is directly ported from legacy driver, but - * despite it being declared it was never called. Although link tuning - * sounds like a good idea, and usually works well for the other drivers, - * it does _not_ work with rt2500usb. Enabling this function will result - * in TX capabilities only until association kicks in. Immediately - * after the successful association all TX frames will be kept in the - * hardware queue and never transmitted. - */ -#if 0 -static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u16 bbp_thresh; - u16 vgc_bound; - u16 sens; - u16 r24; - u16 r25; - u16 r61; - u16 r17_sens; - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Read current r17 value, as well as the sensitivity values - * for the r17 register. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &r17); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); - up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); - low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER); - - /* - * If we are not associated, we should go straight to the - * dynamic CCA tuning. - */ - if (!rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * Determine the BBP tuning threshold and correctly - * set BBP 24, 25 and 61. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); - bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); - - if ((rssi + bbp_thresh) > 0) { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); - } else { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); - } - - rt2500usb_bbp_write(rt2x00dev, 24, r24); - rt2500usb_bbp_write(rt2x00dev, 25, r25); - rt2500usb_bbp_write(rt2x00dev, 61, r61); - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (rssi >= -40) { - if (r17 != 0x60) - rt2500usb_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - low_bound = 0x32; - if (rssi < -77) - up_bound -= (-77 - rssi); - - if (up_bound < low_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, up_bound); - rt2x00dev->link.vgc_level = up_bound; - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; - } -} -#else -#define rt2500usb_link_tuner NULL -#endif - -/* * Initialization functions. */ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) @@ -1542,6 +1409,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2570, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) || rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { @@ -1788,8 +1656,6 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, @@ -1910,7 +1776,6 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .rfkill_poll = rt2500usb_rfkill_poll, .link_stats = rt2500usb_link_stats, .reset_tuner = rt2500usb_reset_tuner, - .link_tuner = rt2500usb_link_tuner, .write_tx_desc = rt2500usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2500usb_write_beacon, @@ -1956,20 +1821,21 @@ static const struct data_queue_desc rt2500usb_queue_atim = { }; static const struct rt2x00_ops rt2500usb_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt2500usb_queue_rx, - .tx = &rt2500usb_queue_tx, - .bcn = &rt2500usb_queue_bcn, - .atim = &rt2500usb_queue_atim, - .lib = &rt2500usb_rt2x00_ops, - .hw = &rt2500usb_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 1, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXD_DESC_SIZE, + .rx = &rt2500usb_queue_rx, + .tx = &rt2500usb_queue_tx, + .bcn = &rt2500usb_queue_bcn, + .atim = &rt2500usb_queue_atim, + .lib = &rt2500usb_rt2x00_ops, + .hw = &rt2500usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500usb_rt2x00debug, + .debugfs = &rt2500usb_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b01edca4258..341a7045463 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h new file mode 100644 index 00000000000..c5fe867665e --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -0,0 +1,1852 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800 + Abstract: Data structures and registers for the rt2800 modules. + Supported chipsets: RT2800E, RT2800ED & RT2800U. + */ + +#ifndef RT2800_H +#define RT2800_H + +/* + * RF chip defines. + * + * RF2820 2.4G 2T3R + * RF2850 2.4G/5G 2T3R + * RF2720 2.4G 1T2R + * RF2750 2.4G/5G 1T2R + * RF3020 2.4G 1T1R + * RF2020 2.4G B/G + * RF3021 2.4G 1T2R + * RF3022 2.4G 2T2R + * RF3052 2.4G 2T2R + */ +#define RF2820 0x0001 +#define RF2850 0x0002 +#define RF2720 0x0003 +#define RF2750 0x0004 +#define RF3020 0x0005 +#define RF2020 0x0006 +#define RF3021 0x0007 +#define RF3022 0x0008 +#define RF3052 0x0009 + +/* + * Chipset version. + */ +#define RT2860C_VERSION 0x28600100 +#define RT2860D_VERSION 0x28600101 +#define RT2880E_VERSION 0x28720200 +#define RT2883_VERSION 0x28830300 +#define RT3070_VERSION 0x30700200 + +/* + * Signal information. + * Default offset is required for RSSI <-> dBm conversion. + */ +#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x1000 +#define CSR_REG_SIZE 0x0800 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0110 +#define BBP_BASE 0x0000 +#define BBP_SIZE 0x0080 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 + +/* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 4 + +/* + * USB registers. + */ + +/* + * INT_SOURCE_CSR: Interrupt source register. + * Write one to clear corresponding bit. + * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c + */ +#define INT_SOURCE_CSR 0x0200 +#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) +#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) +#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) +#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) +#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) +#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) +#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) +#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) +#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) +#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) +#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) +#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) +#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) +#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) +#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) +#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) +#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) +#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) + +/* + * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. + */ +#define INT_MASK_CSR 0x0204 +#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) +#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) +#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) +#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) +#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) +#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) +#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) +#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) +#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) +#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) +#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) +#define INT_MASK_CSR_TBTT FIELD32(0x00000800) +#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) +#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) +#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) +#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) +#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) +#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) + +/* + * WPDMA_GLO_CFG + */ +#define WPDMA_GLO_CFG 0x0208 +#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) +#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) +#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) +#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) +#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) +#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) +#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) +#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) +#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) + +/* + * WPDMA_RST_IDX + */ +#define WPDMA_RST_IDX 0x020c +#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) +#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) +#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) +#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) +#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) +#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) +#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) + +/* + * DELAY_INT_CFG + */ +#define DELAY_INT_CFG 0x0210 +#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) +#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) +#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) +#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) +#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) +#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) + +/* + * WMM_AIFSN_CFG: Aifsn for each EDCA AC + * AIFSN0: AC_BE + * AIFSN1: AC_BK + * AIFSN2: AC_VI + * AIFSN3: AC_VO + */ +#define WMM_AIFSN_CFG 0x0214 +#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) +#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) +#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) +#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) + +/* + * WMM_CWMIN_CSR: CWmin for each EDCA AC + * CWMIN0: AC_BE + * CWMIN1: AC_BK + * CWMIN2: AC_VI + * CWMIN3: AC_VO + */ +#define WMM_CWMIN_CFG 0x0218 +#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) +#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) +#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) +#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) + +/* + * WMM_CWMAX_CSR: CWmax for each EDCA AC + * CWMAX0: AC_BE + * CWMAX1: AC_BK + * CWMAX2: AC_VI + * CWMAX3: AC_VO + */ +#define WMM_CWMAX_CFG 0x021c +#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) +#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) +#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) +#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) + +/* + * AC_TXOP0: AC_BK/AC_BE TXOP register + * AC0TXOP: AC_BK in unit of 32us + * AC1TXOP: AC_BE in unit of 32us + */ +#define WMM_TXOP0_CFG 0x0220 +#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) +#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) + +/* + * AC_TXOP1: AC_VO/AC_VI TXOP register + * AC2TXOP: AC_VI in unit of 32us + * AC3TXOP: AC_VO in unit of 32us + */ +#define WMM_TXOP1_CFG 0x0224 +#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) +#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) + +/* + * GPIO_CTRL_CFG: + */ +#define GPIO_CTRL_CFG 0x0228 +#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) +#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) +#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) +#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) +#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) +#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) +#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) +#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) +#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) + +/* + * MCU_CMD_CFG + */ +#define MCU_CMD_CFG 0x022c + +/* + * AC_BK register offsets + */ +#define TX_BASE_PTR0 0x0230 +#define TX_MAX_CNT0 0x0234 +#define TX_CTX_IDX0 0x0238 +#define TX_DTX_IDX0 0x023c + +/* + * AC_BE register offsets + */ +#define TX_BASE_PTR1 0x0240 +#define TX_MAX_CNT1 0x0244 +#define TX_CTX_IDX1 0x0248 +#define TX_DTX_IDX1 0x024c + +/* + * AC_VI register offsets + */ +#define TX_BASE_PTR2 0x0250 +#define TX_MAX_CNT2 0x0254 +#define TX_CTX_IDX2 0x0258 +#define TX_DTX_IDX2 0x025c + +/* + * AC_VO register offsets + */ +#define TX_BASE_PTR3 0x0260 +#define TX_MAX_CNT3 0x0264 +#define TX_CTX_IDX3 0x0268 +#define TX_DTX_IDX3 0x026c + +/* + * HCCA register offsets + */ +#define TX_BASE_PTR4 0x0270 +#define TX_MAX_CNT4 0x0274 +#define TX_CTX_IDX4 0x0278 +#define TX_DTX_IDX4 0x027c + +/* + * MGMT register offsets + */ +#define TX_BASE_PTR5 0x0280 +#define TX_MAX_CNT5 0x0284 +#define TX_CTX_IDX5 0x0288 +#define TX_DTX_IDX5 0x028c + +/* + * RX register offsets + */ +#define RX_BASE_PTR 0x0290 +#define RX_MAX_CNT 0x0294 +#define RX_CRX_IDX 0x0298 +#define RX_DRX_IDX 0x029c + +/* + * PBF_SYS_CTRL + * HOST_RAM_WRITE: enable Host program ram write selection + */ +#define PBF_SYS_CTRL 0x0400 +#define PBF_SYS_CTRL_READY FIELD32(0x00000080) +#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) + +/* + * HOST-MCU shared memory + */ +#define HOST_CMD_CSR 0x0404 +#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) + +/* + * PBF registers + * Most are for debug. Driver doesn't touch PBF register. + */ +#define PBF_CFG 0x0408 +#define PBF_MAX_PCNT 0x040c +#define PBF_CTRL 0x0410 +#define PBF_INT_STA 0x0414 +#define PBF_INT_ENA 0x0418 + +/* + * BCN_OFFSET0: + */ +#define BCN_OFFSET0 0x042c +#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) +#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) +#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) +#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) + +/* + * BCN_OFFSET1: + */ +#define BCN_OFFSET1 0x0430 +#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) +#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) +#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) +#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) + +/* + * PBF registers + * Most are for debug. Driver doesn't touch PBF register. + */ +#define TXRXQ_PCNT 0x0438 +#define PBF_DBG 0x043c + +/* + * RF registers + */ +#define RF_CSR_CFG 0x0500 +#define RF_CSR_CFG_DATA FIELD32(0x000000ff) +#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) +#define RF_CSR_CFG_WRITE FIELD32(0x00010000) +#define RF_CSR_CFG_BUSY FIELD32(0x00020000) + +/* + * EFUSE_CSR: RT30x0 EEPROM + */ +#define EFUSE_CTRL 0x0580 +#define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) +#define EFUSE_CTRL_MODE FIELD32(0x000000c0) +#define EFUSE_CTRL_KICK FIELD32(0x40000000) +#define EFUSE_CTRL_PRESENT FIELD32(0x80000000) + +/* + * EFUSE_DATA0 + */ +#define EFUSE_DATA0 0x0590 + +/* + * EFUSE_DATA1 + */ +#define EFUSE_DATA1 0x0594 + +/* + * EFUSE_DATA2 + */ +#define EFUSE_DATA2 0x0598 + +/* + * EFUSE_DATA3 + */ +#define EFUSE_DATA3 0x059c + +/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * MAC_CSR0: ASIC revision number. + * ASIC_REV: 0 + * ASIC_VER: 2860 or 2870 + */ +#define MAC_CSR0 0x1000 +#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) +#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) + +/* + * MAC_SYS_CTRL: + */ +#define MAC_SYS_CTRL 0x1004 +#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) +#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) +#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) +#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) +#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) +#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) +#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) +#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) + +/* + * MAC_ADDR_DW0: STA MAC register 0 + */ +#define MAC_ADDR_DW0 0x1008 +#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) +#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) +#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) +#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) + +/* + * MAC_ADDR_DW1: STA MAC register 1 + * UNICAST_TO_ME_MASK: + * Used to mask off bits from byte 5 of the MAC address + * to determine the UNICAST_TO_ME bit for RX frames. + * The full mask is complemented by BSS_ID_MASK: + * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK + */ +#define MAC_ADDR_DW1 0x100c +#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) +#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) +#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) + +/* + * MAC_BSSID_DW0: BSSID register 0 + */ +#define MAC_BSSID_DW0 0x1010 +#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) +#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) +#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) +#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) + +/* + * MAC_BSSID_DW1: BSSID register 1 + * BSS_ID_MASK: + * 0: 1-BSSID mode (BSS index = 0) + * 1: 2-BSSID mode (BSS index: Byte5, bit 0) + * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) + * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) + * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the + * BSSID. This will make sure that those bits will be ignored + * when determining the MY_BSS of RX frames. + */ +#define MAC_BSSID_DW1 0x1014 +#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) +#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) +#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) +#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) + +/* + * MAX_LEN_CFG: Maximum frame length register. + * MAX_MPDU: rt2860b max 16k bytes + * MAX_PSDU: Maximum PSDU length + * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 + */ +#define MAX_LEN_CFG 0x1018 +#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) +#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) +#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) +#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) + +/* + * BBP_CSR_CFG: BBP serial control register + * VALUE: Register value to program into BBP + * REG_NUM: Selected BBP register + * READ_CONTROL: 0 write BBP, 1 read BBP + * BUSY: ASIC is busy executing BBP commands + * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks + * BBP_RW_MODE: 0 serial, 1 paralell + */ +#define BBP_CSR_CFG 0x101c +#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) +#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) +#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) +#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) +#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) +#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) + +/* + * RF_CSR_CFG0: RF control register + * REGID_AND_VALUE: Register value to program into RF + * BITWIDTH: Selected RF register + * STANDBYMODE: 0 high when standby, 1 low when standby + * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate + * BUSY: ASIC is busy executing RF commands + */ +#define RF_CSR_CFG0 0x1020 +#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) +#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) +#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) +#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) +#define RF_CSR_CFG0_SEL FIELD32(0x40000000) +#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) + +/* + * RF_CSR_CFG1: RF control register + * REGID_AND_VALUE: Register value to program into RF + * RFGAP: Gap between BB_CONTROL_RF and RF_LE + * 0: 3 system clock cycle (37.5usec) + * 1: 5 system clock cycle (62.5usec) + */ +#define RF_CSR_CFG1 0x1024 +#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) +#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) + +/* + * RF_CSR_CFG2: RF control register + * VALUE: Register value to program into RF + */ +#define RF_CSR_CFG2 0x1028 +#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) + +/* + * LED_CFG: LED control + * color LED's: + * 0: off + * 1: blinking upon TX2 + * 2: periodic slow blinking + * 3: always on + * LED polarity: + * 0: active low + * 1: active high + */ +#define LED_CFG 0x102c +#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) +#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) +#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) +#define LED_CFG_R_LED_MODE FIELD32(0x03000000) +#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) +#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) +#define LED_CFG_LED_POLAR FIELD32(0x40000000) + +/* + * XIFS_TIME_CFG: MAC timing + * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX + * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX + * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX + * when MAC doesn't reference BBP signal BBRXEND + * EIFS: unit 1us + * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer + * + */ +#define XIFS_TIME_CFG 0x1100 +#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) +#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) +#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) +#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) +#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) + +/* + * BKOFF_SLOT_CFG: + */ +#define BKOFF_SLOT_CFG 0x1104 +#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) +#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) + +/* + * NAV_TIME_CFG: + */ +#define NAV_TIME_CFG 0x1108 +#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) +#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) +#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) +#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) + +/* + * CH_TIME_CFG: count as channel busy + */ +#define CH_TIME_CFG 0x110c + +/* + * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us + */ +#define PBF_LIFE_TIMER 0x1110 + +/* + * BCN_TIME_CFG: + * BEACON_INTERVAL: in unit of 1/16 TU + * TSF_TICKING: Enable TSF auto counting + * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode + * BEACON_GEN: Enable beacon generator + */ +#define BCN_TIME_CFG 0x1114 +#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) +#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) +#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) +#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) +#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) +#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) + +/* + * TBTT_SYNC_CFG: + */ +#define TBTT_SYNC_CFG 0x1118 + +/* + * TSF_TIMER_DW0: Local lsb TSF timer, read-only + */ +#define TSF_TIMER_DW0 0x111c +#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) + +/* + * TSF_TIMER_DW1: Local msb TSF timer, read-only + */ +#define TSF_TIMER_DW1 0x1120 +#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) + +/* + * TBTT_TIMER: TImer remains till next TBTT, read-only + */ +#define TBTT_TIMER 0x1124 + +/* + * INT_TIMER_CFG: + */ +#define INT_TIMER_CFG 0x1128 + +/* + * INT_TIMER_EN: GP-timer and pre-tbtt Int enable + */ +#define INT_TIMER_EN 0x112c + +/* + * CH_IDLE_STA: channel idle time + */ +#define CH_IDLE_STA 0x1130 + +/* + * CH_BUSY_STA: channel busy time + */ +#define CH_BUSY_STA 0x1134 + +/* + * MAC_STATUS_CFG: + * BBP_RF_BUSY: When set to 0, BBP and RF are stable. + * if 1 or higher one of the 2 registers is busy. + */ +#define MAC_STATUS_CFG 0x1200 +#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) + +/* + * PWR_PIN_CFG: + */ +#define PWR_PIN_CFG 0x1204 + +/* + * AUTOWAKEUP_CFG: Manual power control / status register + * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set + * AUTOWAKE: 0:sleep, 1:awake + */ +#define AUTOWAKEUP_CFG 0x1208 +#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) +#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) +#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) + +/* + * EDCA_AC0_CFG: + */ +#define EDCA_AC0_CFG 0x1300 +#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC1_CFG: + */ +#define EDCA_AC1_CFG 0x1304 +#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC2_CFG: + */ +#define EDCA_AC2_CFG 0x1308 +#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC3_CFG: + */ +#define EDCA_AC3_CFG 0x130c +#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_TID_AC_MAP: + */ +#define EDCA_TID_AC_MAP 0x1310 + +/* + * TX_PWR_CFG_0: + */ +#define TX_PWR_CFG_0 0x1314 +#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) +#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) +#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) +#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) +#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) +#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) +#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) +#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_1: + */ +#define TX_PWR_CFG_1 0x1318 +#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) +#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) +#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) +#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) +#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) +#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) +#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) +#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_2: + */ +#define TX_PWR_CFG_2 0x131c +#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) +#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) +#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) +#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) +#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) +#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) +#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) +#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_3: + */ +#define TX_PWR_CFG_3 0x1320 +#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) +#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) +#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) +#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) +#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) +#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) +#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) +#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_4: + */ +#define TX_PWR_CFG_4 0x1324 +#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) +#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) +#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) +#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) + +/* + * TX_PIN_CFG: + */ +#define TX_PIN_CFG 0x1328 +#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) +#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) +#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) +#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) +#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) +#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) +#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) +#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) +#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) +#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) +#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) +#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) +#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) +#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) +#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) +#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) +#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) +#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) +#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) +#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) + +/* + * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz + */ +#define TX_BAND_CFG 0x132c +#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) +#define TX_BAND_CFG_A FIELD32(0x00000002) +#define TX_BAND_CFG_BG FIELD32(0x00000004) + +/* + * TX_SW_CFG0: + */ +#define TX_SW_CFG0 0x1330 + +/* + * TX_SW_CFG1: + */ +#define TX_SW_CFG1 0x1334 + +/* + * TX_SW_CFG2: + */ +#define TX_SW_CFG2 0x1338 + +/* + * TXOP_THRES_CFG: + */ +#define TXOP_THRES_CFG 0x133c + +/* + * TXOP_CTRL_CFG: + */ +#define TXOP_CTRL_CFG 0x1340 + +/* + * TX_RTS_CFG: + * RTS_THRES: unit:byte + * RTS_FBK_EN: enable rts rate fallback + */ +#define TX_RTS_CFG 0x1344 +#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) +#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) +#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) + +/* + * TX_TIMEOUT_CFG: + * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us + * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure + * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. + * it is recommended that: + * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) + */ +#define TX_TIMEOUT_CFG 0x1348 +#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) +#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) +#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) + +/* + * TX_RTY_CFG: + * SHORT_RTY_LIMIT: short retry limit + * LONG_RTY_LIMIT: long retry limit + * LONG_RTY_THRE: Long retry threshoold + * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode + * 0:expired by retry limit, 1: expired by mpdu life timer + * AGG_RTY_MODE: Aggregate MPDU retry mode + * 0:expired by retry limit, 1: expired by mpdu life timer + * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable + */ +#define TX_RTY_CFG 0x134c +#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) +#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) +#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) +#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) +#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) +#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) + +/* + * TX_LINK_CFG: + * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us + * MFB_ENABLE: TX apply remote MFB 1:enable + * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable + * 0: not apply remote remote unsolicit (MFS=7) + * TX_MRQ_EN: MCS request TX enable + * TX_RDG_EN: RDG TX enable + * TX_CF_ACK_EN: Piggyback CF-ACK enable + * REMOTE_MFB: remote MCS feedback + * REMOTE_MFS: remote MCS feedback sequence number + */ +#define TX_LINK_CFG 0x1350 +#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) +#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) +#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) +#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) +#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) +#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) +#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) +#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) + +/* + * HT_FBK_CFG0: + */ +#define HT_FBK_CFG0 0x1354 +#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) +#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) +#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) +#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) +#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) +#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) +#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) +#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) + +/* + * HT_FBK_CFG1: + */ +#define HT_FBK_CFG1 0x1358 +#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) +#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) +#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) +#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) +#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) +#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) +#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) +#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) + +/* + * LG_FBK_CFG0: + */ +#define LG_FBK_CFG0 0x135c +#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) +#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) +#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) +#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) +#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) +#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) +#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) +#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) + +/* + * LG_FBK_CFG1: + */ +#define LG_FBK_CFG1 0x1360 +#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) +#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) +#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) +#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) + +/* + * CCK_PROT_CFG: CCK Protection + * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) + * PROTECT_CTRL: Protection control frame type for CCK TX + * 0:none, 1:RTS/CTS, 2:CTS-to-self + * PROTECT_NAV: TXOP protection type for CCK TX + * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect + * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow + * RTS_TH_EN: RTS threshold enable on CCK TX + */ +#define CCK_PROT_CFG 0x1364 +#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * OFDM_PROT_CFG: OFDM Protection + */ +#define OFDM_PROT_CFG 0x1368 +#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * MM20_PROT_CFG: MM20 Protection + */ +#define MM20_PROT_CFG 0x136c +#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * MM40_PROT_CFG: MM40 Protection + */ +#define MM40_PROT_CFG 0x1370 +#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * GF20_PROT_CFG: GF20 Protection + */ +#define GF20_PROT_CFG 0x1374 +#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * GF40_PROT_CFG: GF40 Protection + */ +#define GF40_PROT_CFG 0x1378 +#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * EXP_CTS_TIME: + */ +#define EXP_CTS_TIME 0x137c + +/* + * EXP_ACK_TIME: + */ +#define EXP_ACK_TIME 0x1380 + +/* + * RX_FILTER_CFG: RX configuration register. + */ +#define RX_FILTER_CFG 0x1400 +#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) +#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) +#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) +#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) +#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) +#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) +#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) +#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) +#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) +#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) +#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) +#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) +#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) +#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) +#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) +#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) +#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) + +/* + * AUTO_RSP_CFG: + * AUTORESPONDER: 0: disable, 1: enable + * BAC_ACK_POLICY: 0:long, 1:short preamble + * CTS_40_MMODE: Response CTS 40MHz duplicate mode + * CTS_40_MREF: Response CTS 40MHz duplicate mode + * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble + * DUAL_CTS_EN: Power bit value in control frame + * ACK_CTS_PSM_BIT:Power bit value in control frame + */ +#define AUTO_RSP_CFG 0x1404 +#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) +#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) +#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) +#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) +#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) +#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) +#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) + +/* + * LEGACY_BASIC_RATE: + */ +#define LEGACY_BASIC_RATE 0x1408 + +/* + * HT_BASIC_RATE: + */ +#define HT_BASIC_RATE 0x140c + +/* + * HT_CTRL_CFG: + */ +#define HT_CTRL_CFG 0x1410 + +/* + * SIFS_COST_CFG: + */ +#define SIFS_COST_CFG 0x1414 + +/* + * RX_PARSER_CFG: + * Set NAV for all received frames + */ +#define RX_PARSER_CFG 0x1418 + +/* + * TX_SEC_CNT0: + */ +#define TX_SEC_CNT0 0x1500 + +/* + * RX_SEC_CNT0: + */ +#define RX_SEC_CNT0 0x1504 + +/* + * CCMP_FC_MUTE: + */ +#define CCMP_FC_MUTE 0x1508 + +/* + * TXOP_HLDR_ADDR0: + */ +#define TXOP_HLDR_ADDR0 0x1600 + +/* + * TXOP_HLDR_ADDR1: + */ +#define TXOP_HLDR_ADDR1 0x1604 + +/* + * TXOP_HLDR_ET: + */ +#define TXOP_HLDR_ET 0x1608 + +/* + * QOS_CFPOLL_RA_DW0: + */ +#define QOS_CFPOLL_RA_DW0 0x160c + +/* + * QOS_CFPOLL_RA_DW1: + */ +#define QOS_CFPOLL_RA_DW1 0x1610 + +/* + * QOS_CFPOLL_QC: + */ +#define QOS_CFPOLL_QC 0x1614 + +/* + * RX_STA_CNT0: RX PLCP error count & RX CRC error count + */ +#define RX_STA_CNT0 0x1700 +#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) +#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) + +/* + * RX_STA_CNT1: RX False CCA count & RX LONG frame count + */ +#define RX_STA_CNT1 0x1704 +#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) +#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) + +/* + * RX_STA_CNT2: + */ +#define RX_STA_CNT2 0x1708 +#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) +#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) + +/* + * TX_STA_CNT0: TX Beacon count + */ +#define TX_STA_CNT0 0x170c +#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) +#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) + +/* + * TX_STA_CNT1: TX tx count + */ +#define TX_STA_CNT1 0x1710 +#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) +#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) + +/* + * TX_STA_CNT2: TX tx count + */ +#define TX_STA_CNT2 0x1714 +#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) +#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) + +/* + * TX_STA_FIFO: TX Result for specific PID status fifo register + */ +#define TX_STA_FIFO 0x1718 +#define TX_STA_FIFO_VALID FIELD32(0x00000001) +#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) +#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) +#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) +#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) +#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) +#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) +#define TX_STA_FIFO_MCS FIELD32(0x007f0000) +#define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) + +/* + * TX_AGG_CNT: Debug counter + */ +#define TX_AGG_CNT 0x171c +#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT0: + */ +#define TX_AGG_CNT0 0x1720 +#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT1: + */ +#define TX_AGG_CNT1 0x1724 +#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT2: + */ +#define TX_AGG_CNT2 0x1728 +#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT3: + */ +#define TX_AGG_CNT3 0x172c +#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT4: + */ +#define TX_AGG_CNT4 0x1730 +#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT5: + */ +#define TX_AGG_CNT5 0x1734 +#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT6: + */ +#define TX_AGG_CNT6 0x1738 +#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT7: + */ +#define TX_AGG_CNT7 0x173c +#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) + +/* + * MPDU_DENSITY_CNT: + * TX_ZERO_DEL: TX zero length delimiter count + * RX_ZERO_DEL: RX zero length delimiter count + */ +#define MPDU_DENSITY_CNT 0x1740 +#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) +#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) + +/* + * Security key table memory. + * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry + * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry + * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry + * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry + * SHARED_KEY_MODE_BASE: 4-byte * 16-entry + */ +#define MAC_WCID_BASE 0x1800 +#define PAIRWISE_KEY_TABLE_BASE 0x4000 +#define MAC_IVEIV_TABLE_BASE 0x6000 +#define MAC_WCID_ATTRIBUTE_BASE 0x6800 +#define SHARED_KEY_TABLE_BASE 0x6c00 +#define SHARED_KEY_MODE_BASE 0x7000 + +#define MAC_WCID_ENTRY(__idx) \ + ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define MAC_IVEIV_ENTRY(__idx) \ + ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) +#define MAC_WCID_ATTR_ENTRY(__idx) \ + ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define SHARED_KEY_MODE_ENTRY(__idx) \ + ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) + +struct mac_wcid_entry { + u8 mac[6]; + u8 reserved[2]; +} __attribute__ ((packed)); + +struct hw_key_entry { + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +} __attribute__ ((packed)); + +struct mac_iveiv_entry { + u8 iv[8]; +} __attribute__ ((packed)); + +/* + * MAC_WCID_ATTRIBUTE: + */ +#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) +#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) +#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) +#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) + +/* + * SHARED_KEY_MODE: + */ +#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) +#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) +#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) +#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) +#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) +#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) +#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) +#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) + +/* + * HOST-MCU communication + */ + +/* + * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. + */ +#define H2M_MAILBOX_CSR 0x7010 +#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) +#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) + +/* + * H2M_MAILBOX_CID: + */ +#define H2M_MAILBOX_CID 0x7014 +#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) +#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) + +/* + * H2M_MAILBOX_STATUS: + */ +#define H2M_MAILBOX_STATUS 0x701c + +/* + * H2M_INT_SRC: + */ +#define H2M_INT_SRC 0x7024 + +/* + * H2M_BBP_AGENT: + */ +#define H2M_BBP_AGENT 0x7028 + +/* + * MCU_LEDCS: LED control for MCU Mailbox. + */ +#define MCU_LEDCS_LED_MODE FIELD8(0x1f) +#define MCU_LEDCS_POLARITY FIELD8(0x01) + +/* + * HW_CS_CTS_BASE: + * Carrier-sense CTS frame base address. + * It's where mac stores carrier-sense frame for carrier-sense function. + */ +#define HW_CS_CTS_BASE 0x7700 + +/* + * HW_DFS_CTS_BASE: + * DFS CTS frame base address. It's where mac stores CTS frame for DFS. + */ +#define HW_DFS_CTS_BASE 0x7780 + +/* + * TXRX control registers - base address 0x3000 + */ + +/* + * TXRX_CSR1: + * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. + */ +#define TXRX_CSR1 0x77d0 + +/* + * HW_DEBUG_SETTING_BASE: + * since NULL frame won't be that long (256 byte) + * We steal 16 tail bytes to save debugging settings + */ +#define HW_DEBUG_SETTING_BASE 0x77f0 +#define HW_DEBUG_SETTING_BASE2 0x7770 + +/* + * HW_BEACON_BASE + * In order to support maximum 8 MBSS and its maximum length + * is 512 bytes for each beacon + * Three section discontinue memory segments will be used. + * 1. The original region for BCN 0~3 + * 2. Extract memory from FCE table for BCN 4~5 + * 3. Extract memory from Pair-wise key table for BCN 6~7 + * It occupied those memory of wcid 238~253 for BCN 6 + * and wcid 222~237 for BCN 7 + * + * IMPORTANT NOTE: Not sure why legacy driver does this, + * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. + */ +#define HW_BEACON_BASE0 0x7800 +#define HW_BEACON_BASE1 0x7a00 +#define HW_BEACON_BASE2 0x7c00 +#define HW_BEACON_BASE3 0x7e00 +#define HW_BEACON_BASE4 0x7200 +#define HW_BEACON_BASE5 0x7400 +#define HW_BEACON_BASE6 0x5dc0 +#define HW_BEACON_BASE7 0x5bc0 + +#define HW_BEACON_OFFSET(__index) \ + ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ + (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ + (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * BBP 1: TX Antenna + */ +#define BBP1_TX_POWER FIELD8(0x07) +#define BBP1_TX_ANTENNA FIELD8(0x18) + +/* + * BBP 3: RX Antenna + */ +#define BBP3_RX_ANTENNA FIELD8(0x18) +#define BBP3_HT40_PLUS FIELD8(0x20) + +/* + * BBP 4: Bandwidth + */ +#define BBP4_TX_BF FIELD8(0x01) +#define BBP4_BANDWIDTH FIELD8(0x18) + +/* + * RFCSR registers + * The wordsize of the RFCSR is 8 bits. + */ + +/* + * RFCSR 6: + */ +#define RFCSR6_R FIELD8(0x03) + +/* + * RFCSR 7: + */ +#define RFCSR7_RF_TUNING FIELD8(0x01) + +/* + * RFCSR 12: + */ +#define RFCSR12_TX_POWER FIELD8(0x1f) + +/* + * RFCSR 22: + */ +#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) + +/* + * RFCSR 23: + */ +#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) + +/* + * RFCSR 30: + */ +#define RFCSR30_RF_CALIBRATION FIELD8(0x80) + +/* + * RF registers + */ + +/* + * RF 2 + */ +#define RF2_ANTENNA_RX2 FIELD32(0x00000040) +#define RF2_ANTENNA_TX1 FIELD32(0x00004000) +#define RF2_ANTENNA_RX1 FIELD32(0x00020000) + +/* + * RF 3 + */ +#define RF3_TXPOWER_G FIELD32(0x00003e00) +#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) +#define RF3_TXPOWER_A FIELD32(0x00003c00) + +/* + * RF 4 + */ +#define RF4_TXPOWER_G FIELD32(0x000007c0) +#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) +#define RF4_TXPOWER_A FIELD32(0x00000780) +#define RF4_FREQ_OFFSET FIELD32(0x001f8000) +#define RF4_HT40 FIELD32(0x00200000) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * EEPROM Version + */ +#define EEPROM_VERSION 0x0001 +#define EEPROM_VERSION_FAE FIELD16(0x00ff) +#define EEPROM_VERSION_VERSION FIELD16(0xff00) + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM ANTENNA config + * RXPATH: 1: 1R, 2: 2R, 3: 3R + * TXPATH: 1: 1T, 2: 2T + */ +#define EEPROM_ANTENNA 0x001a +#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) +#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) + +/* + * EEPROM NIC config + * CARDBUS_ACCEL: 0 - enable, 1 - disable + */ +#define EEPROM_NIC 0x001b +#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) +#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) +#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) +#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) +#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) +#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) +#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) +#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) +#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) +#define EEPROM_NIC_BW40M_A FIELD16(0x0200) + +/* + * EEPROM frequency + */ +#define EEPROM_FREQ 0x001d +#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) +#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) +#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) + +/* + * EEPROM LED + * POLARITY_RDY_G: Polarity RDY_G setting. + * POLARITY_RDY_A: Polarity RDY_A setting. + * POLARITY_ACT: Polarity ACT setting. + * POLARITY_GPIO_0: Polarity GPIO0 setting. + * POLARITY_GPIO_1: Polarity GPIO1 setting. + * POLARITY_GPIO_2: Polarity GPIO2 setting. + * POLARITY_GPIO_3: Polarity GPIO3 setting. + * POLARITY_GPIO_4: Polarity GPIO4 setting. + * LED_MODE: Led mode. + */ +#define EEPROM_LED1 0x001e +#define EEPROM_LED2 0x001f +#define EEPROM_LED3 0x0020 +#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) +#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) +#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) +#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) +#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) +#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) +#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) +#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) +#define EEPROM_LED_LED_MODE FIELD16(0x1f00) + +/* + * EEPROM LNA + */ +#define EEPROM_LNA 0x0022 +#define EEPROM_LNA_BG FIELD16(0x00ff) +#define EEPROM_LNA_A0 FIELD16(0xff00) + +/* + * EEPROM RSSI BG offset + */ +#define EEPROM_RSSI_BG 0x0023 +#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) +#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) + +/* + * EEPROM RSSI BG2 offset + */ +#define EEPROM_RSSI_BG2 0x0024 +#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) +#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) + +/* + * EEPROM RSSI A offset + */ +#define EEPROM_RSSI_A 0x0025 +#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) +#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) + +/* + * EEPROM RSSI A2 offset + */ +#define EEPROM_RSSI_A2 0x0026 +#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) +#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) + +/* + * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. + * This is delta in 40MHZ. + * VALUE: Tx Power dalta value (MAX=4) + * TYPE: 1: Plus the delta value, 0: minus the delta value + * TXPOWER: Enable: + */ +#define EEPROM_TXPOWER_DELTA 0x0028 +#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) +#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) +#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) + +/* + * EEPROM TXPOWER 802.11BG + */ +#define EEPROM_TXPOWER_BG1 0x0029 +#define EEPROM_TXPOWER_BG2 0x0030 +#define EEPROM_TXPOWER_BG_SIZE 7 +#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) + +/* + * EEPROM TXPOWER 802.11A + */ +#define EEPROM_TXPOWER_A1 0x003c +#define EEPROM_TXPOWER_A2 0x0053 +#define EEPROM_TXPOWER_A_SIZE 6 +#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) + +/* + * EEPROM TXpower byrate: 20MHZ power + */ +#define EEPROM_TXPOWER_BYRATE 0x006f + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x0078 +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * MCU mailbox commands. + */ +#define MCU_SLEEP 0x30 +#define MCU_WAKEUP 0x31 +#define MCU_RADIO_OFF 0x35 +#define MCU_CURRENT 0x36 +#define MCU_LED 0x50 +#define MCU_LED_STRENGTH 0x51 +#define MCU_LED_1 0x52 +#define MCU_LED_2 0x53 +#define MCU_LED_3 0x54 +#define MCU_RADAR 0x60 +#define MCU_BOOT_SIGNAL 0x72 +#define MCU_BBP_SIGNAL 0x80 +#define MCU_POWER_SAVE 0x83 + +/* + * MCU mailbox tokens + */ +#define TOKEN_WAKUP 3 + +/* + * DMA descriptor defines. + */ +#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) +#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) + +/* + * TX WI structure + */ + +/* + * Word0 + * FRAG: 1 To inform TKIP engine this is a fragment. + * MIMO_PS: The remote peer is in dynamic MIMO-PS mode + * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs + * BW: Channel bandwidth 20MHz or 40 MHz + * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED + */ +#define TXWI_W0_FRAG FIELD32(0x00000001) +#define TXWI_W0_MIMO_PS FIELD32(0x00000002) +#define TXWI_W0_CF_ACK FIELD32(0x00000004) +#define TXWI_W0_TS FIELD32(0x00000008) +#define TXWI_W0_AMPDU FIELD32(0x00000010) +#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) +#define TXWI_W0_TX_OP FIELD32(0x00000300) +#define TXWI_W0_MCS FIELD32(0x007f0000) +#define TXWI_W0_BW FIELD32(0x00800000) +#define TXWI_W0_SHORT_GI FIELD32(0x01000000) +#define TXWI_W0_STBC FIELD32(0x06000000) +#define TXWI_W0_IFS FIELD32(0x08000000) +#define TXWI_W0_PHYMODE FIELD32(0xc0000000) + +/* + * Word1 + */ +#define TXWI_W1_ACK FIELD32(0x00000001) +#define TXWI_W1_NSEQ FIELD32(0x00000002) +#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) +#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) +#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) +#define TXWI_W1_PACKETID FIELD32(0xf0000000) + +/* + * Word2 + */ +#define TXWI_W2_IV FIELD32(0xffffffff) + +/* + * Word3 + */ +#define TXWI_W3_EIV FIELD32(0xffffffff) + +/* + * RX WI structure + */ + +/* + * Word0 + */ +#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) +#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) +#define RXWI_W0_BSSID FIELD32(0x00001c00) +#define RXWI_W0_UDF FIELD32(0x0000e000) +#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) +#define RXWI_W0_TID FIELD32(0xf0000000) + +/* + * Word1 + */ +#define RXWI_W1_FRAG FIELD32(0x0000000f) +#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) +#define RXWI_W1_MCS FIELD32(0x007f0000) +#define RXWI_W1_BW FIELD32(0x00800000) +#define RXWI_W1_SHORT_GI FIELD32(0x01000000) +#define RXWI_W1_STBC FIELD32(0x06000000) +#define RXWI_W1_PHYMODE FIELD32(0xc0000000) + +/* + * Word2 + */ +#define RXWI_W2_RSSI0 FIELD32(0x000000ff) +#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) +#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) + +/* + * Word3 + */ +#define RXWI_W3_SNR0 FIELD32(0x000000ff) +#define RXWI_W3_SNR1 FIELD32(0x0000ff00) + +/* + * Macros for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. + */ +#define MIN_G_TXPOWER 0 +#define MIN_A_TXPOWER -7 +#define MAX_G_TXPOWER 31 +#define MAX_A_TXPOWER 15 +#define DEFAULT_TXPOWER 5 + +#define TXPOWER_G_FROM_DEV(__txpower) \ + ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_G_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) + +#define TXPOWER_A_FROM_DEV(__txpower) \ + ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_A_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) + +#endif /* RT2800_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c new file mode 100644 index 00000000000..eb1e1d00bec --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -0,0 +1,2284 @@ +/* + Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> + Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com> + + Based on the original rt2800pci.c and rt2800usb.c. + Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800lib + Abstract: rt2800 generic device routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#ifdef CONFIG_RT2800USB +#include "rt2x00usb.h" +#endif +#include "rt2800lib.h" +#include "rt2800.h" +#include "rt2800usb.h" + +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("rt2800 library"); +MODULE_LICENSE("GPL"); + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2800_register_read and rt2800_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + * The _lock versions must be used if you already hold the csr_mutex + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RFCSR(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ + rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \ + H2M_MAILBOX_CSR_OWNER, (__reg)) + +static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); + + rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); + + rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + + WAIT_FOR_BBP(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + + WAIT_FOR_RFCSR(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); + rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1) +{ + u32 reg; + + /* + * RT2880 and RT3052 don't support MCU requests. + */ + if (rt2x00_rt(&rt2x00dev->chip, RT2880) || + rt2x00_rt(&rt2x00dev->chip, RT3052)) + return; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the MCU becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_MCU(rt2x00dev, ®)) { + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); + + reg = 0; + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} +EXPORT_SYMBOL_GPL(rt2800_mcu_request); + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +const struct rt2x00debug rt2800_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2800_register_read, + .write = rt2800_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2800_bbp_read, + .write = rt2800_bbp_write, + .word_base = BBP_BASE, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2800_rf_write, + .word_base = RF_BASE, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +EXPORT_SYMBOL_GPL(rt2800_rt2x00debug); +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); +} +EXPORT_SYMBOL_GPL(rt2800_rfkill_poll); + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2800_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + unsigned int polarity = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_POLARITY); + unsigned int ledmode = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_MODE); + + if (led->type == LED_TYPE_RADIO) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? 0x20 : 0); + } else if (led->type == LED_TYPE_ASSOC) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * The specs tell us the following levels: + * 0, 1 ,3, 7, 15, 31 + * to determine the level in a simple way we can simply + * work with bitshifting: + * (1 << level) - 1 + */ + rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + (1 << brightness / (LED_FULL / 6)) - 1, + polarity); + } +} + +static int rt2800_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2800_register_read(led->rt2x00dev, LED_CFG, ®); + rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); + rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); + rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); + rt2800_register_write(led->rt2x00dev, LED_CFG, reg); + + return 0; +} + +void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2800_brightness_set; + led->led_dev.blink_set = rt2800_blink_set; + led->flags = LED_INITIALIZED; +} +EXPORT_SYMBOL_GPL(rt2800_init_led); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct mac_wcid_entry wcid_entry; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, + (crypto->cmd == SET_KEY) * crypto->bssidx); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + + memset(&iveiv_entry, 0, sizeof(iveiv_entry)); + if ((crypto->cipher == CIPHER_TKIP) || + (crypto->cipher == CIPHER_TKIP_NO_MIC) || + (crypto->cipher == CIPHER_AES)) + iveiv_entry.iv[3] |= 0x20; + iveiv_entry.iv[3] |= key->keyidx << 6; + rt2800_register_multiwrite(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + offset = MAC_WCID_ENTRY(key->hw_key_idx); + + memset(&wcid_entry, 0, sizeof(wcid_entry)); + if (crypto->cmd == SET_KEY) + memcpy(&wcid_entry, crypto->address, ETH_ALEN); + rt2800_register_multiwrite(rt2x00dev, offset, + &wcid_entry, sizeof(wcid_entry)); +} + +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 offset; + u32 reg; + + if (crypto->cmd == SET_KEY) { + key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have + * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + /* + * Update WCID information + */ + rt2800_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_shared_key); + +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + u32 offset; + + if (crypto->cmd == SET_KEY) { + /* + * 1 pairwise key is possible per AID, this means that the AID + * equals our hw_key_idx. Make sure the WCID starts _after_ the + * last possible shared key entry. + */ + if (crypto->aid > (256 - 32)) + return -ENOSPC; + + key->hw_key_idx = 32 + crypto->aid; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * Update WCID information + */ + rt2800_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key); + +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u32 reg; + + /* + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. + */ + rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_PSPOLL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_filter); + +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags) +{ + unsigned int beacon_base; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2800_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, + (conf->sync == TSF_SYNC_BEACON)); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); + conf->bssid[1] = cpu_to_le32(reg); + + rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, + conf->bssid, sizeof(conf->bssid)); + } +} +EXPORT_SYMBOL_GPL(rt2800_config_intf); + +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); + rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, + !!erp->short_preamble); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, + !!erp->short_preamble); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, + erp->cts_protection ? 2 : 0); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); + rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); + rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); + rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_erp); + +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) +{ + u8 r1; + u8 r3; + + rt2800_bbp_read(rt2x00dev, 1, &r1); + rt2800_bbp_read(rt2x00dev, 3, &r3); + + /* + * Configure the TX antenna. + */ + switch ((int)ant->tx) { + case 1: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); + break; + case 3: + /* Do nothing */ + break; + } + + /* + * Configure the RX antenna. + */ + switch ((int)ant->rx) { + case 1: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); + break; + case 3: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); + break; + } + + rt2800_bbp_write(rt2x00dev, 3, r3); + rt2800_bbp_write(rt2x00dev, 1, r1); +} +EXPORT_SYMBOL_GPL(rt2800_config_ant); + +static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain; + + if (libconf->rf.channel <= 14) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); + } else if (libconf->rf.channel <= 64) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); + } else if (libconf->rf.channel <= 128) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); + } + + rt2x00dev->lna_gain = lna_gain; +} + +static void rt2800_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + if (rt2x00dev->default_ant.tx == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); + + if (rt2x00dev->default_ant.rx == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + } else if (rt2x00dev->default_ant.rx == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + + if (rf->channel > 14) { + /* + * When TX power is below 0, we should increase it by 7 to + * make it a positive value (Minumum value is -7). + * However this means that values between 0 and 7 have + * double meaning, and we should set a 7DBm boost flag. + */ + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, + (info->tx_power1 >= 0)); + + if (info->tx_power1 < 0) + info->tx_power1 += 7; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power1)); + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, + (info->tx_power2 >= 0)); + + if (info->tx_power2 < 0) + info->tx_power2 += 7; + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power2)); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power2)); + } + + rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); +} + +static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3); + + rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 24, + rt2x00dev->calibration[conf_is_ht40(conf)]); + + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); +} + +static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u32 reg; + unsigned int tx_pin; + u8 bbp; + + if ((rt2x00_rt(&rt2x00dev->chip, RT3070) || + rt2x00_rt(&rt2x00dev->chip, RT3090)) && + (rt2x00_rf(&rt2x00dev->chip, RF2020) || + rt2x00_rf(&rt2x00dev->chip, RF3020) || + rt2x00_rf(&rt2x00dev->chip, RF3021) || + rt2x00_rf(&rt2x00dev->chip, RF3022))) + rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info); + else + rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info); + + /* + * Change BBP settings + */ + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 86, 0); + + if (rf->channel <= 14) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + } else { + rt2800_bbp_write(rt2x00dev, 82, 0x84); + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + } else { + rt2800_bbp_write(rt2x00dev, 82, 0xf2); + + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + rt2800_bbp_write(rt2x00dev, 75, 0x46); + else + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + + rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); + rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); + rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); + + tx_pin = 0; + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.tx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); + } + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.rx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); + } + + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + rt2800_bbp_read(rt2x00dev, 3, &bbp); + rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2800_bbp_write(rt2x00dev, 3, bbp); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + if (conf_is_ht40(conf)) { + rt2800_bbp_write(rt2x00dev, 69, 0x1a); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x16); + } else { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 70, 0x08); + rt2800_bbp_write(rt2x00dev, 73, 0x11); + } + } + + msleep(1); +} + +static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 reg; + u32 value = TXPOWER_G_TO_DEV(txpower); + u8 r1; + + rt2800_bbp_read(rt2x00dev, 1, &r1); + rt2x00_set_field8(®, BBP1_TX_POWER, 0); + rt2800_bbp_write(rt2x00dev, 1, r1); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®); + rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); + rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg); +} + +static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); + rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); + rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); + rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); +} + +static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + + rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + } else { + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + + rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + } +} + +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) +{ + /* Always recalculate LNA gain before changing configuration */ + rt2800_config_lna_gain(rt2x00dev, libconf); + + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) + rt2800_config_channel(rt2x00dev, libconf->conf, + &libconf->rf, &libconf->channel); + if (flags & IEEE80211_CONF_CHANGE_POWER) + rt2800_config_txpower(rt2x00dev, libconf->conf->power_level); + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2800_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2800_config_ps(rt2x00dev, libconf); +} +EXPORT_SYMBOL_GPL(rt2800_config); + +/* + * Link tuning + */ +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); +} +EXPORT_SYMBOL_GPL(rt2800_link_stats); + +static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) + return 0x1c + (2 * rt2x00dev->lna_gain); + else + return 0x2e + rt2x00dev->lna_gain; + } + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0x32 + (rt2x00dev->lna_gain * 5) / 3; + else + return 0x3a + (rt2x00dev->lna_gain * 5) / 3; +} + +static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level != vgc_level) { + rt2800_bbp_write(rt2x00dev, 66, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev)); +} +EXPORT_SYMBOL_GPL(rt2800_reset_tuner); + +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count) +{ + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* + * When RSSI is better then -80 increase VGC level with 0x10 + */ + rt2800_set_vgc(rt2x00dev, qual, + rt2800_get_default_vgc(rt2x00dev) + + ((qual->rssi > -80) * 0x10)); +} +EXPORT_SYMBOL_GPL(rt2800_link_tuner); + +/* + * Initialization functions. + */ +int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + if (rt2x00_intf_is_usb(rt2x00dev)) { + /* + * Wait until BBP and RF are ready. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, + reg & ~0x00002000); + } else if (rt2x00_intf_is_pci(rt2x00dev)) + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); +#ifdef CONFIG_RT2800USB + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, + USB_MODE_RESET, REGISTER_TIMEOUT); +#endif + } + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®); + rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ + rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg); + + rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®); + rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ + rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg); + + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + } + + rt2800_register_read(rt2x00dev, TX_LINK_CFG, ®); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); + rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); + rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg); + + rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); + rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); + if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && + rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); + else + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg); + + rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); + + rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006); + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + } + + rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); + rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); + + rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, + IEEE80211_MAX_RTS_THRESHOLD); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); + rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + + /* + * ASIC will keep garbage value after boot, clear encryption keys. + */ + for (i = 0; i < 4; i++) + rt2800_register_write(rt2x00dev, + SHARED_KEY_MODE_ENTRY(i), 0); + + for (i = 0; i < 256; i++) { + u32 wcid[2] = { 0xffffffff, 0x00ffffff }; + rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), + wcid, sizeof(wcid)); + + rt2800_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); + rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); + } + + /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®); + rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); + rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg); + } + + rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); + rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg); + + rt2800_register_read(rt2x00dev, HT_FBK_CFG1, ®); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); + rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg); + + rt2800_register_read(rt2x00dev, LG_FBK_CFG0, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); + rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg); + + rt2800_register_read(rt2x00dev, LG_FBK_CFG1, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); + rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg); + + /* + * We must clear the error counters. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); + rt2800_register_read(rt2x00dev, RX_STA_CNT1, ®); + rt2800_register_read(rt2x00dev, RX_STA_CNT2, ®); + rt2800_register_read(rt2x00dev, TX_STA_CNT0, ®); + rt2800_register_read(rt2x00dev, TX_STA_CNT1, ®); + rt2800_register_read(rt2x00dev, TX_STA_CNT2, ®); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_registers); + +static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ®); + if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) + return 0; + + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); + return -EACCES; +} + +static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u8 value; + + /* + * BBP was enabled after firmware was loaded, + * but we need to reactivate it now. + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + return 0; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; +} + +int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) || + rt2800_wait_bbp_ready(rt2x00dev))) + return -EACCES; + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + rt2800_bbp_write(rt2x00dev, 81, 0x37); + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + rt2800_bbp_write(rt2x00dev, 84, 0x99); + rt2800_bbp_write(rt2x00dev, 86, 0x00); + rt2800_bbp_write(rt2x00dev, 91, 0x04); + rt2800_bbp_write(rt2x00dev, 92, 0x00); + rt2800_bbp_write(rt2x00dev, 103, 0x00); + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 73, 0x12); + } + + if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + rt2800_bbp_write(rt2x00dev, 84, 0x19); + + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 84, 0x99); + rt2800_bbp_write(rt2x00dev, 105, 0x05); + } + + if (rt2x00_rt(&rt2x00dev->chip, RT3052)) { + rt2800_bbp_write(rt2x00dev, 31, 0x08); + rt2800_bbp_write(rt2x00dev, 78, 0x0e); + rt2800_bbp_write(rt2x00dev, 80, 0x08); + } + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + rt2800_bbp_write(rt2x00dev, reg_id, value); + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_bbp); + +static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, + bool bw40, u8 rfcsr24, u8 filter_target) +{ + unsigned int i; + u8 bbp; + u8 rfcsr; + u8 passband; + u8 stopband; + u8 overtuned = 0; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * Set power & frequency of passband test tone + */ + rt2800_bbp_write(rt2x00dev, 24, 0); + + for (i = 0; i < 100; i++) { + rt2800_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + rt2800_bbp_read(rt2x00dev, 55, &passband); + if (passband) + break; + } + + /* + * Set power & frequency of stopband test tone + */ + rt2800_bbp_write(rt2x00dev, 24, 0x06); + + for (i = 0; i < 100; i++) { + rt2800_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + rt2800_bbp_read(rt2x00dev, 55, &stopband); + + if ((passband - stopband) <= filter_target) { + rfcsr24++; + overtuned += ((passband - stopband) == filter_target); + } else + break; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + } + + rfcsr24 -= !!overtuned; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + return rfcsr24; +} + +int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + u8 bbp; + + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) + return 0; + + if (rt2x00_intf_is_pci(rt2x00dev)) { + if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF3021) && + !rt2x00_rf(&rt2x00dev->chip, RF3022)) + return 0; + } + + /* + * Init RF calibration. + */ + rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + msleep(1); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x70); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x71); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); + } else if (rt2x00_intf_is_pci(rt2x00dev)) { + rt2800_rfcsr_write(rt2x00dev, 0, 0x50); + rt2800_rfcsr_write(rt2x00dev, 1, 0x01); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); + rt2800_rfcsr_write(rt2x00dev, 3, 0x75); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x50); + rt2800_rfcsr_write(rt2x00dev, 8, 0x39); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x60); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x75); + rt2800_rfcsr_write(rt2x00dev, 13, 0x75); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x31); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 26, 0x25); + rt2800_rfcsr_write(rt2x00dev, 27, 0x23); + rt2800_rfcsr_write(rt2x00dev, 28, 0x13); + rt2800_rfcsr_write(rt2x00dev, 29, 0x83); + } + + /* + * Set RX Filter calibration for 20MHz and 40MHz + */ + rt2x00dev->calibration[0] = + rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16); + rt2x00dev->calibration[1] = + rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19); + + /* + * Set back to initial state + */ + rt2800_bbp_write(rt2x00dev, 24, 0); + + rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * set BBP back to BW20 + */ + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); + +int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); + + return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); +} +EXPORT_SYMBOL_GPL(rt2800_efuse_detect); + +static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, ®); + rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); + rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); + rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); + rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg); + + /* Wait until the EEPROM has been loaded */ + rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); + + /* Apparently the data is read from end to start */ + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, + (u32 *)&rt2x00dev->eeprom[i]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, + (u32 *)&rt2x00dev->eeprom[i + 2]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, + (u32 *)&rt2x00dev->eeprom[i + 4]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, + (u32 *)&rt2x00dev->eeprom[i + 6]); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + + for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) + rt2800_efuse_read(rt2x00dev, i); +} +EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); + +int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + u8 *mac; + u8 default_lna_gain; + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { + /* + * There is a max of 2 RX streams for RT28x0 series + */ + if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) + rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); + rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); + if ((word & 0x00ff) == 0x00ff) { + rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, + LED_MODE_TXRX_ACTIVITY); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); + EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); + } + + /* + * During the LNA validation we are going to use + * lna0 as correct value. Note that EEPROM_LNA + * is never validated. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); + default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); + if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, + default_lna_gain); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); + if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, + default_lna_gain); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); + +int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + + rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + struct rt2x00_chip *chip = &rt2x00dev->chip; + + /* + * The check for rt2860 is not a typo, some rt2870 hardware + * identifies itself as rt2860 in the CSR register. + */ + if (rt2x00_check_rev(chip, 0xfff00000, 0x28600000) || + rt2x00_check_rev(chip, 0xfff00000, 0x28700000) || + rt2x00_check_rev(chip, 0xfff00000, 0x28800000)) { + rt2x00_set_chip_rt(rt2x00dev, RT2870); + } else if (rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) { + rt2x00_set_chip_rt(rt2x00dev, RT3070); + } else { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); + return -ENODEV; + } + } + rt2x00_print_chip(rt2x00dev); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && + !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF2020) && + !rt2x00_rf(&rt2x00dev->chip, RF3021) && + !rt2x00_rf(&rt2x00dev->chip, RF3022)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->default_ant.tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); + rt2x00dev->default_ant.rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); + + /* + * Read frequency offset and RF programming sequence. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); + rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); + + /* + * Read external LNA informations. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) + __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) + __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + + /* + * Store led settings, for correct led behaviour. + */ +#ifdef CONFIG_RT2X00_LIB_LEDS + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_eeprom); + +/* + * RF value list for rt28x0 + * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) + */ +static const struct rf_channel rf_vals[] = { + { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, + { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, + { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, + { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, + { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, + { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, + { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, + { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, + { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, + { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, + { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, + { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, + { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, + { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, + { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, + { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, + { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, + { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, + { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, + { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, + { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, + { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, + { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, + { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, + { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, + + /* 802.11 HyperLan 2 */ + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, + { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, + { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, + { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, + { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, + { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, + { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, + { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, + { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, + { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, + { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, + { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, + + /* 802.11 UNII */ + { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, + { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, + { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, + { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, + { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, + { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, + { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, + { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, + { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, + { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, + { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, + + /* 802.11 Japan */ + { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, + { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, + { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, + { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, + { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, + { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, + { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, +}; + +/* + * RF value list for rt3070 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_302x[] = { + {1, 241, 2, 2 }, + {2, 241, 2, 7 }, + {3, 242, 2, 2 }, + {4, 242, 2, 7 }, + {5, 243, 2, 2 }, + {6, 243, 2, 7 }, + {7, 244, 2, 2 }, + {8, 244, 2, 7 }, + {9, 245, 2, 2 }, + {10, 245, 2, 7 }, + {11, 246, 2, 2 }, + {12, 246, 2, 7 }, + {13, 247, 2, 2 }, + {14, 248, 2, 4 }, +}; + +int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct rt2x00_chip *chip = &rt2x00dev->chip; + struct hw_mode_spec *spec = &rt2x00dev->spec; + struct channel_info *info; + char *tx_power1; + char *tx_power2; + unsigned int i; + u16 eeprom; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Initialize hw_mode information. + */ + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; + + if (rt2x00_rf(chip, RF2820) || + rt2x00_rf(chip, RF2720) || + (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(chip, RF3052))) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(chip, RF2850) || rt2x00_rf(chip, RF2750)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; + } else if (rt2x00_rf(chip, RF3020) || + rt2x00_rf(chip, RF2020) || + rt2x00_rf(chip, RF3021) || + rt2x00_rf(chip, RF3022)) { + spec->num_channels = ARRAY_SIZE(rf_vals_302x); + spec->channels = rf_vals_302x; + } + + /* + * Initialize HT information. + */ + if (!rt2x00_rf(chip, RF2020)) + spec->ht.ht_supported = true; + else + spec->ht.ht_supported = false; + + spec->ht.cap = + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_TX_STBC | + IEEE80211_HT_CAP_RX_STBC | + IEEE80211_HT_CAP_PSMP_SUPPORT; + spec->ht.ampdu_factor = 3; + spec->ht.ampdu_density = 4; + spec->ht.mcs.tx_params = + IEEE80211_HT_MCS_TX_DEFINED | + IEEE80211_HT_MCS_TX_RX_DIFF | + ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << + IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); + + switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { + case 3: + spec->ht.mcs.rx_mask[2] = 0xff; + case 2: + spec->ht.mcs.rx_mask[1] = 0xff; + case 1: + spec->ht.mcs.rx_mask[0] = 0xff; + spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ + break; + } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + + for (i = 0; i < 14; i++) { + info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); + info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); + } + + if (spec->num_channels > 14) { + tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); + tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); + + for (i = 14; i < spec->num_channels; i++) { + info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); + info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode); + +/* + * IEEE80211 stack callback functions. + */ +static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, + u32 *iv32, u16 *iv16) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + + offset = MAC_IVEIV_ENTRY(hw_key_idx); + rt2800_register_multiread(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); + memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); +} + +static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); + + rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); + rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); + rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + return 0; +} + +static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + u32 offset; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + /* + * We only need to perform additional register initialization + * for WMM queues/ + */ + if (queue_idx >= 4) + return 0; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); + field.bit_offset = (queue_idx & 1) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2800_register_write(rt2x00dev, offset, reg); + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); + + rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); + + rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); + + /* Update EDCA registers */ + offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); + rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); + rt2800_register_write(rt2x00dev, offset, reg); + + return 0; +} + +static u64 rt2800_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, ®); + tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; + rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, ®); + tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); + + return tsf; +} + +const struct ieee80211_ops rt2800_mac80211_ops = { + .tx = rt2x00mac_tx, + .start = rt2x00mac_start, + .stop = rt2x00mac_stop, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .configure_filter = rt2x00mac_configure_filter, + .set_tim = rt2x00mac_set_tim, + .set_key = rt2x00mac_set_key, + .get_stats = rt2x00mac_get_stats, + .get_tkip_seq = rt2800_get_tkip_seq, + .set_rts_threshold = rt2800_set_rts_threshold, + .bss_info_changed = rt2x00mac_bss_info_changed, + .conf_tx = rt2800_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt2800_get_tsf, + .rfkill_poll = rt2x00mac_rfkill_poll, +}; +EXPORT_SYMBOL_GPL(rt2800_mac80211_ops); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h new file mode 100644 index 00000000000..535ce22f2ac --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -0,0 +1,151 @@ +/* + Copyright (C) 2009 Bartlomiej Zolnierkiewicz + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef RT2800LIB_H +#define RT2800LIB_H + +struct rt2800_ops { + void (*register_read)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 *value); + void (*register_read_lock)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 *value); + void (*register_write)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 value); + void (*register_write_lock)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 value); + + void (*register_multiread)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length); + void (*register_multiwrite)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, const u32 length); + + int (*regbusy_read)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, u32 *reg); +}; + +static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_read(rt2x00dev, offset, value); +} + +static inline void rt2800_register_read_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_read_lock(rt2x00dev, offset, value); +} + +static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_write(rt2x00dev, offset, value); +} + +static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_write_lock(rt2x00dev, offset, value); +} + +static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_multiread(rt2x00dev, offset, value, length); +} + +static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, + const u32 length) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_multiwrite(rt2x00dev, offset, value, length); +} + +static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg); +} + +void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1); + +extern const struct rt2x00debug rt2800_rt2x00debug; + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev); +void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type); +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags); +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags); +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp); +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant); +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags); +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count); + +int rt2800_init_registers(struct rt2x00_dev *rt2x00dev); +int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev); +int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev); + +int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); +void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); +int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev); +int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev); +int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev); + +extern const struct ieee80211_ops rt2800_mac80211_ops; + +#endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c new file mode 100644 index 00000000000..dfc886fcb44 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -0,0 +1,1322 @@ +/* + Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800pci + Abstract: rt2800pci device specific routines. + Supported chipsets: RT2800E & RT2800ED. + */ + +#include <linux/crc-ccitt.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/eeprom_93cx6.h> + +#include "rt2x00.h" +#include "rt2x00pci.h" +#include "rt2x00soc.h" +#include "rt2800lib.h" +#include "rt2800.h" +#include "rt2800pci.h" + +#ifdef CONFIG_RT2800PCI_PCI_MODULE +#define CONFIG_RT2800PCI_PCI +#endif + +#ifdef CONFIG_RT2800PCI_WISOC_MODULE +#define CONFIG_RT2800PCI_WISOC +#endif + +/* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 1; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < 200; i++) { + rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); + + if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || + (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || + (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) || + (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token)) + break; + + udelay(REGISTER_BUSY_DELAY); + } + + if (i == 200) + ERROR(rt2x00dev, "MCU request failed, no response from hardware\n"); + + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); +} + +#ifdef CONFIG_RT2800PCI_WISOC +static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +{ + u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */ + + memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); +} +#else +static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2800PCI_WISOC */ + +#ifdef CONFIG_RT2800PCI_PCI +static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg; + + rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); + + eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); + eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); + eeprom->reg_data_clock = + !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); + eeprom->reg_chip_select = + !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); +} + +static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg = 0; + + rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); + rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); + rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, + !!eeprom->reg_data_clock); + rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, + !!eeprom->reg_chip_select); + + rt2800_register_write(rt2x00dev, E2PROM_CSR, reg); +} + +static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +{ + struct eeprom_93cx6 eeprom; + u32 reg; + + rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); + + eeprom.data = rt2x00dev; + eeprom.register_read = rt2800pci_eepromregister_read; + eeprom.register_write = rt2800pci_eepromregister_write; + eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; + eeprom.reg_data_clock = 0; + eeprom.reg_chip_select = 0; + + eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, + EEPROM_SIZE / sizeof(u16)); +} + +static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + return rt2800_efuse_detect(rt2x00dev); +} + +static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ + rt2800_read_eeprom_efuse(rt2x00dev); +} +#else +static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + return 0; +} + +static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2800PCI_PCI */ + +/* + * Firmware functions + */ +static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) +{ + return FIRMWARE_RT2860; +} + +static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + u16 fw_crc; + u16 crc; + + /* + * Only support 8kb firmware files. + */ + if (len != 8192) + return FW_BAD_LENGTH; + + /* + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + fw_crc = (data[len - 2] << 8 | data[len - 1]); + + /* + * Use the crc ccitt algorithm. + * This will return the same value as the legacy driver which + * used bit ordering reversion on the both the firmware bytes + * before input input as well as on the final output. + * Obviously using crc ccitt directly is much more efficient. + */ + crc = crc_ccitt(~0, data, len - 2); + + /* + * There is a small difference between the crc-itu-t + bitrev and + * the crc-ccitt crc calculation. In the latter method the 2 bytes + * will be swapped, use swab16 to convert the crc to the correct + * value. + */ + crc = swab16(crc); + + return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; +} + +static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + unsigned int i; + u32 reg; + + /* + * Wait for stable hardware. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); + + /* + * Disable DMA, will be reenabled later when enabling + * the radio. + */ + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + /* + * enable Host program ram write selection + */ + reg = 0; + rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg); + + /* + * Write firmware to device. + */ + rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, + data, len); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); + + /* + * Wait for device to stabilize. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "PBF system register not ready.\n"); + return -EBUSY; + } + + /* + * Disable interrupts + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF); + + /* + * Initialize BBP R/W access agent + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + + return 0; +} + +/* + * Initialization functions. + */ +static bool rt2800pci_get_entry_state(struct queue_entry *entry) +{ + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + u32 word; + + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 1, &word); + + return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE)); + } else { + rt2x00_desc_read(entry_priv->desc, 1, &word); + + return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE)); + } +} + +static void rt2800pci_clear_entry(struct queue_entry *entry) +{ + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u32 word; + + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 0, word); + + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); + rt2x00_desc_write(entry_priv->desc, 1, word); + } else { + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); + rt2x00_desc_write(entry_priv->desc, 1, word); + } +} + +static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) +{ + struct queue_entry_priv_pci *entry_priv; + u32 reg; + + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + + /* + * Initialize registers. + */ + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX0, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX0, 0); + + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX1, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX1, 0); + + entry_priv = rt2x00dev->tx[2].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX2, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX2, 0); + + entry_priv = rt2x00dev->tx[3].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX3, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX3, 0); + + entry_priv = rt2x00dev->rx->entries[0].priv_data; + rt2800_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); + rt2800_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); + rt2800_register_write(rt2x00dev, RX_DRX_IDX, 0); + + /* + * Enable global DMA configuration + */ + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_write(rt2x00dev, DELAY_INT_CFG, 0); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, + (state == STATE_RADIO_RX_ON) || + (state == STATE_RADIO_RX_ON_LINK)); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); +} + +static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int mask = (state == STATE_RADIO_IRQ_ON); + u32 reg; + + /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (state == STATE_RADIO_IRQ_ON) { + rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + } + + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask); + rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); +} + +static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && + !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) + return 0; + + msleep(1); + } + + ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); + return -EACCES; +} + +static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 word; + + /* + * Initialize all registers. + */ + if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800pci_init_queues(rt2x00dev) || + rt2800_init_registers(rt2x00dev) || + rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) + return -EIO; + + /* + * Send signal to firmware during boot time. + */ + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + + /* + * Enable RX. + */ + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + /* + * Initialize LED control + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + word & 0xff, (word >> 8) & 0xff); + + return 0; +} + +static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); + + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + + /* Wait for DMA, ignore error */ + rt2800pci_wait_wpdma_ready(rt2x00dev); +} + +static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + /* + * Always put the device to sleep (even when we intend to wakeup!) + * if the device is booting and wasn't asleep it will return + * failure when attempting to wakeup. + */ + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + + if (state == STATE_AWAKE) { + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); + rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP); + } + + return 0; +} + +static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + /* + * Before the radio can be enabled, the device first has + * to be woken up. After that it needs a bit of time + * to be fully awake and then the radio can be enabled. + */ + rt2800pci_set_state(rt2x00dev, STATE_AWAKE); + msleep(1); + retval = rt2800pci_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + /* + * After the radio has been disabled, the device should + * be put to sleep for powersaving. + */ + rt2800pci_disable_radio(rt2x00dev); + rt2800pci_set_state(rt2x00dev, STATE_SLEEP); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + case STATE_RADIO_RX_OFF: + case STATE_RADIO_RX_OFF_LINK: + rt2800pci_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt2800pci_toggle_irq(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2800pci_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct txentry_desc *txdesc) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + __le32 *txd = skbdesc->desc; + __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom); + u32 word; + + /* + * Initialize TX Info descriptor + */ + rt2x00_desc_read(txwi, 0, &word); + rt2x00_set_field32(&word, TXWI_W0_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); + rt2x00_set_field32(&word, TXWI_W0_TS, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_AMPDU, + test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); + rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs); + rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); + rt2x00_set_field32(&word, TXWI_W0_BW, + test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, + test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); + rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); + rt2x00_desc_write(txwi, 0, word); + + rt2x00_desc_read(txwi, 1, &word); + rt2x00_set_field32(&word, TXWI_W1_ACK, + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_NSEQ, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); + rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, + test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? + txdesc->key_idx : 0xff); + rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, + skb->len - txdesc->l2pad); + rt2x00_set_field32(&word, TXWI_W1_PACKETID, + skbdesc->entry->queue->qid + 1); + rt2x00_desc_write(txwi, 1, word); + + /* + * Always write 0 to IV/EIV fields, hardware will insert the IV + * from the IVEIV register when TXD_W3_WIV is set to 0. + * When TXD_W3_WIV is set to 1 it will use the IV data + * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which + * crypto entry in the registers should be used to encrypt the frame. + */ + _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); + _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); + + /* + * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1 + * must contains a TXWI structure + 802.11 header + padding + 802.11 + * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and + * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11 + * data. It means that LAST_SEC0 is always 0. + */ + + /* + * Initialize TX descriptor + */ + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); + rt2x00_desc_write(txd, 0, word); + + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); + rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, + !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W1_BURST, + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W1_SD_LEN0, + rt2x00dev->ops->extra_tx_headroom); + rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0); + rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_SD_PTR1, + skbdesc->skb_dma + rt2x00dev->ops->extra_tx_headroom); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 3, &word); + rt2x00_set_field32(&word, TXD_W3_WIV, + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W3_QSEL, 2); + rt2x00_desc_write(txd, 3, word); +} + +/* + * TX data initialization + */ +static void rt2800pci_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + /* + * Write entire beacon with descriptor to register. + */ + beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + rt2800_register_multiwrite(rt2x00dev, + beacon_base, + skbdesc->desc, skbdesc->desc_len); + rt2800_register_multiwrite(rt2x00dev, + beacon_base + skbdesc->desc_len, + entry->skb->data, entry->skb->len); + + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; +} + +static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid queue_idx) +{ + struct data_queue *queue; + unsigned int idx, qidx = 0; + u32 reg; + + if (queue_idx == QID_BEACON) { + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + return; + } + + if (queue_idx > QID_HCCA && queue_idx != QID_MGMT) + return; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + idx = queue->index[Q_INDEX]; + + if (queue_idx == QID_MGMT) + qidx = 5; + else + qidx = queue_idx; + + rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); +} + +static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + u32 reg; + + if (qid == QID_BEACON) { + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0); + return; + } + + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); +} + +/* + * RX control handlers + */ +static void rt2800pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + __le32 *rxd = entry_priv->desc; + __le32 *rxwi = (__le32 *)entry->skb->data; + u32 rxd3; + u32 rxwi0; + u32 rxwi1; + u32 rxwi2; + u32 rxwi3; + + rt2x00_desc_read(rxd, 3, &rxd3); + rt2x00_desc_read(rxwi, 0, &rxwi0); + rt2x00_desc_read(rxwi, 1, &rxwi1); + rt2x00_desc_read(rxwi, 2, &rxwi2); + rt2x00_desc_read(rxwi, 3, &rxwi3); + + if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR)) + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + /* + * Unfortunately we don't know the cipher type used during + * decryption. This prevents us from correct providing + * correct statistics through debugfs. + */ + rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); + rxdesc->cipher_status = + rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR); + } + + if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) { + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. Unfortunately the descriptor doesn't contain + * any fields with the EIV/IV data either, so they can't + * be restored by rt2x00lib. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + + if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; + + if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) { + rxdesc->dev_flags |= RXDONE_L2PAD; + skbdesc->flags |= SKBDESC_L2_PADDED; + } + + if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) + rxdesc->flags |= RX_FLAG_SHORT_GI; + + if (rt2x00_get_field32(rxwi1, RXWI_W1_BW)) + rxdesc->flags |= RX_FLAG_40MHZ; + + /* + * Detect RX rate, always use MCS as signal type. + */ + rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; + rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE); + rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS); + + /* + * Mask of 0x8 bit to remove the short preamble flag. + */ + if (rxdesc->rate_mode == RATE_MODE_CCK) + rxdesc->signal &= ~0x8; + + rxdesc->rssi = + (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + + rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; + + rxdesc->noise = + (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + + rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; + + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + /* + * Set RX IDX in register to inform hardware that we have handled + * this entry and it is available for reuse again. + */ + rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); + + /* + * Remove TXWI descriptor from start of buffer. + */ + skb_pull(entry->skb, RXWI_DESC_SIZE); + skb_trim(entry->skb, rxdesc->size); +} + +/* + * Interrupt functions. + */ +static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + struct queue_entry *entry; + struct queue_entry *entry_done; + struct queue_entry_priv_pci *entry_priv; + struct txdone_entry_desc txdesc; + u32 word; + u32 reg; + u32 old_reg; + unsigned int type; + unsigned int index; + u16 mcs, real_mcs; + + /* + * During each loop we will compare the freshly read + * TX_STA_FIFO register value with the value read from + * the previous loop. If the 2 values are equal then + * we should stop processing because the chance it + * quite big that the device has been unplugged and + * we risk going into an endless loop. + */ + old_reg = 0; + + while (1) { + rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); + if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) + break; + + if (old_reg == reg) + break; + old_reg = reg; + + /* + * Skip this entry when it contains an invalid + * queue identication number. + */ + type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE) - 1; + if (type >= QID_RX) + continue; + + queue = rt2x00queue_get_queue(rt2x00dev, type); + if (unlikely(!queue)) + continue; + + /* + * Skip this entry when it contains an invalid + * index number. + */ + index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID) - 1; + if (unlikely(index >= queue->limit)) + continue; + + entry = &queue->entries[index]; + entry_priv = entry->priv_data; + rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word); + + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + while (entry != entry_done) { + /* + * Catch up. + * Just report any entries we missed as failed. + */ + WARNING(rt2x00dev, + "TX status report missed for entry %d\n", + entry_done->entry_idx); + + txdesc.flags = 0; + __set_bit(TXDONE_UNKNOWN, &txdesc.flags); + txdesc.retry = 0; + + rt2x00lib_txdone(entry_done, &txdesc); + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + } + + /* + * Obtain the status about this packet. + */ + txdesc.flags = 0; + if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + else + __set_bit(TXDONE_FAILURE, &txdesc.flags); + + /* + * Ralink has a retry mechanism using a global fallback + * table. We setup this fallback table to try immediate + * lower rate for all rates. In the TX_STA_FIFO, + * the MCS field contains the MCS used for the successfull + * transmission. If the first transmission succeed, + * we have mcs == tx_mcs. On the second transmission, + * we have mcs = tx_mcs - 1. So the number of + * retry is (tx_mcs - mcs). + */ + mcs = rt2x00_get_field32(word, TXWI_W0_MCS); + real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); + __set_bit(TXDONE_FALLBACK, &txdesc.flags); + txdesc.retry = mcs - min(mcs, real_mcs); + + rt2x00lib_txdone(entry, &txdesc); + } +} + +static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) +{ + struct rt2x00_dev *rt2x00dev = dev_instance; + u32 reg; + + /* Read status and ACK all interrupts */ + rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + + if (!reg) + return IRQ_NONE; + + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return IRQ_HANDLED; + + /* + * 1 - Rx ring done interrupt. + */ + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) + rt2x00pci_rxdone(rt2x00dev); + + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) + rt2800pci_txdone(rt2x00dev); + + return IRQ_HANDLED; +} + +/* + * Device probe functions. + */ +static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + /* + * Read EEPROM into buffer + */ + switch (rt2x00dev->chip.rt) { + case RT2880: + case RT3052: + rt2800pci_read_eeprom_soc(rt2x00dev); + break; + default: + if (rt2800pci_efuse_detect(rt2x00dev)) + rt2800pci_read_eeprom_efuse(rt2x00dev); + else + rt2800pci_read_eeprom_pci(rt2x00dev); + break; + } + + return rt2800_validate_eeprom(rt2x00dev); +} + +static const struct rt2800_ops rt2800pci_rt2800_ops = { + .register_read = rt2x00pci_register_read, + .register_read_lock = rt2x00pci_register_read, /* same for PCI */ + .register_write = rt2x00pci_register_write, + .register_write_lock = rt2x00pci_register_write, /* same for PCI */ + + .register_multiread = rt2x00pci_register_multiread, + .register_multiwrite = rt2x00pci_register_multiwrite, + + .regbusy_read = rt2x00pci_regbusy_read, +}; + +static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops; + + /* + * Allocate eeprom data. + */ + retval = rt2800pci_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2800_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + retval = rt2800_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * This device has multiple filters for control frames + * and has a separate filter for PS Poll frames. + */ + __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags); + __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags); + + /* + * This device requires firmware. + */ + if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && + !rt2x00_rt(&rt2x00dev->chip, RT3052)) + __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { + .irq_handler = rt2800pci_interrupt, + .probe_hw = rt2800pci_probe_hw, + .get_firmware_name = rt2800pci_get_firmware_name, + .check_firmware = rt2800pci_check_firmware, + .load_firmware = rt2800pci_load_firmware, + .initialize = rt2x00pci_initialize, + .uninitialize = rt2x00pci_uninitialize, + .get_entry_state = rt2800pci_get_entry_state, + .clear_entry = rt2800pci_clear_entry, + .set_device_state = rt2800pci_set_device_state, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, + .write_tx_desc = rt2800pci_write_tx_desc, + .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt2800pci_write_beacon, + .kick_tx_queue = rt2800pci_kick_tx_queue, + .kill_tx_queue = rt2800pci_kill_tx_queue, + .fill_rxdone = rt2800pci_fill_rxdone, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, +}; + +static const struct data_queue_desc rt2800pci_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = AGGREGATION_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci), +}; + +static const struct data_queue_desc rt2800pci_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = AGGREGATION_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci), +}; + +static const struct data_queue_desc rt2800pci_queue_bcn = { + .entry_num = 8 * BEACON_ENTRIES, + .data_size = 0, /* No DMA required for beacons */ + .desc_size = TXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci), +}; + +static const struct rt2x00_ops rt2800pci_ops = { + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 8, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXWI_DESC_SIZE, + .rx = &rt2800pci_queue_rx, + .tx = &rt2800pci_queue_tx, + .bcn = &rt2800pci_queue_bcn, + .lib = &rt2800pci_rt2x00_ops, + .hw = &rt2800_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2800_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * RT2800pci module information. + */ +static struct pci_device_id rt2800pci_device_table[] = { + { PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); +#ifdef CONFIG_RT2800PCI_PCI +MODULE_FIRMWARE(FIRMWARE_RT2860); +MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); +#endif /* CONFIG_RT2800PCI_PCI */ +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_RT2800PCI_WISOC +#if defined(CONFIG_RALINK_RT288X) +__rt2x00soc_probe(RT2880, &rt2800pci_ops); +#elif defined(CONFIG_RALINK_RT305X) +__rt2x00soc_probe(RT3052, &rt2800pci_ops); +#endif + +static struct platform_driver rt2800soc_driver = { + .driver = { + .name = "rt2800_wmac", + .owner = THIS_MODULE, + .mod_name = KBUILD_MODNAME, + }, + .probe = __rt2x00soc_probe, + .remove = __devexit_p(rt2x00soc_remove), + .suspend = rt2x00soc_suspend, + .resume = rt2x00soc_resume, +}; +#endif /* CONFIG_RT2800PCI_WISOC */ + +#ifdef CONFIG_RT2800PCI_PCI +static struct pci_driver rt2800pci_driver = { + .name = KBUILD_MODNAME, + .id_table = rt2800pci_device_table, + .probe = rt2x00pci_probe, + .remove = __devexit_p(rt2x00pci_remove), + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; +#endif /* CONFIG_RT2800PCI_PCI */ + +static int __init rt2800pci_init(void) +{ + int ret = 0; + +#ifdef CONFIG_RT2800PCI_WISOC + ret = platform_driver_register(&rt2800soc_driver); + if (ret) + return ret; +#endif +#ifdef CONFIG_RT2800PCI_PCI + ret = pci_register_driver(&rt2800pci_driver); + if (ret) { +#ifdef CONFIG_RT2800PCI_WISOC + platform_driver_unregister(&rt2800soc_driver); +#endif + return ret; + } +#endif + + return ret; +} + +static void __exit rt2800pci_exit(void) +{ +#ifdef CONFIG_RT2800PCI_PCI + pci_unregister_driver(&rt2800pci_driver); +#endif +#ifdef CONFIG_RT2800PCI_WISOC + platform_driver_unregister(&rt2800soc_driver); +#endif +} + +module_init(rt2800pci_init); +module_exit(rt2800pci_exit); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h new file mode 100644 index 00000000000..afc8e7da27c --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.h @@ -0,0 +1,159 @@ +/* + Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800pci + Abstract: Data structures and registers for the rt2800pci module. + Supported chipsets: RT2800E & RT2800ED. + */ + +#ifndef RT2800PCI_H +#define RT2800PCI_H + +/* + * PCI registers. + */ + +/* + * E2PROM_CSR: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE: 0: 93c46, 1:93c66. + * LOAD_STATUS: 1:loading, 0:done. + */ +#define E2PROM_CSR 0x0004 +#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) +#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) +#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) +#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) +#define E2PROM_CSR_TYPE FIELD32(0x00000030) +#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) +#define E2PROM_CSR_RELOAD FIELD32(0x00000080) + +/* + * Queue register offset macros + */ +#define TX_QUEUE_REG_OFFSET 0x10 +#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET) +#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET) +#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET) +#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET) + +/* + * 8051 firmware image. + */ +#define FIRMWARE_RT2860 "rt2860.bin" +#define FIRMWARE_IMAGE_BASE 0x2000 + +/* + * DMA descriptor defines. + */ +#define TXD_DESC_SIZE ( 4 * sizeof(__le32) ) +#define RXD_DESC_SIZE ( 4 * sizeof(__le32) ) + +/* + * TX descriptor format for TX, PRIO and Beacon Ring. + */ + +/* + * Word0 + */ +#define TXD_W0_SD_PTR0 FIELD32(0xffffffff) + +/* + * Word1 + */ +#define TXD_W1_SD_LEN1 FIELD32(0x00003fff) +#define TXD_W1_LAST_SEC1 FIELD32(0x00004000) +#define TXD_W1_BURST FIELD32(0x00008000) +#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000) +#define TXD_W1_LAST_SEC0 FIELD32(0x40000000) +#define TXD_W1_DMA_DONE FIELD32(0x80000000) + +/* + * Word2 + */ +#define TXD_W2_SD_PTR1 FIELD32(0xffffffff) + +/* + * Word3 + * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI + * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. + * 0:MGMT, 1:HCCA 2:EDCA + */ +#define TXD_W3_WIV FIELD32(0x01000000) +#define TXD_W3_QSEL FIELD32(0x06000000) +#define TXD_W3_TCO FIELD32(0x20000000) +#define TXD_W3_UCO FIELD32(0x40000000) +#define TXD_W3_ICO FIELD32(0x80000000) + +/* + * RX descriptor format for RX Ring. + */ + +/* + * Word0 + */ +#define RXD_W0_SDP0 FIELD32(0xffffffff) + +/* + * Word1 + */ +#define RXD_W1_SDL1 FIELD32(0x00003fff) +#define RXD_W1_SDL0 FIELD32(0x3fff0000) +#define RXD_W1_LS0 FIELD32(0x40000000) +#define RXD_W1_DMA_DONE FIELD32(0x80000000) + +/* + * Word2 + */ +#define RXD_W2_SDP1 FIELD32(0xffffffff) + +/* + * Word3 + * AMSDU: RX with 802.3 header, not 802.11 header. + * DECRYPTED: This frame is being decrypted. + */ +#define RXD_W3_BA FIELD32(0x00000001) +#define RXD_W3_DATA FIELD32(0x00000002) +#define RXD_W3_NULLDATA FIELD32(0x00000004) +#define RXD_W3_FRAG FIELD32(0x00000008) +#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010) +#define RXD_W3_MULTICAST FIELD32(0x00000020) +#define RXD_W3_BROADCAST FIELD32(0x00000040) +#define RXD_W3_MY_BSS FIELD32(0x00000080) +#define RXD_W3_CRC_ERROR FIELD32(0x00000100) +#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600) +#define RXD_W3_AMSDU FIELD32(0x00000800) +#define RXD_W3_HTC FIELD32(0x00001000) +#define RXD_W3_RSSI FIELD32(0x00002000) +#define RXD_W3_L2PAD FIELD32(0x00004000) +#define RXD_W3_AMPDU FIELD32(0x00008000) +#define RXD_W3_DECRYPTED FIELD32(0x00010000) +#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000) +#define RXD_W3_PLCP_RSSI FIELD32(0x00040000) + +#endif /* RT2800PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 9fe770f7d7b..af85d18cdbe 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1,5 +1,9 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -34,6 +38,8 @@ #include "rt2x00.h" #include "rt2x00usb.h" +#include "rt2800lib.h" +#include "rt2800.h" #include "rt2800usb.h" /* @@ -44,1027 +50,6 @@ module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); /* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00usb_register_read and rt2x00usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - * The _lock versions must be used if you already hold the csr_mutex - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RFCSR(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) -#define WAIT_FOR_MCU(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \ - H2M_MAILBOX_CSR_OWNER, (__reg)) - -static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_RFCSR(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); - rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the MCU becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_MCU(rt2x00dev, ®)) { - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); - - reg = 0; - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2800usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00usb_register_read, - .write = rt2x00usb_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800usb_bbp_read, - .write = rt2800usb_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800usb_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800usb_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - - if (led->type == LED_TYPE_RADIO) { - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } -} - -static int rt2800usb_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00usb_register_read(led->rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg); - - return 0; -} - -static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800usb_brightness_set; - led->led_dev.blink_set = rt2800usb_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_wcid_entry wcid_entry; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2x00usb_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - offset = MAC_WCID_ENTRY(key->hw_key_idx); - - memset(&wcid_entry, 0, sizeof(wcid_entry)); - if (crypto->cmd == SET_KEY) - memcpy(&wcid_entry, crypto->address, ETH_ALEN); - rt2x00usb_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - int timeout; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - offset, &key_entry, - sizeof(key_entry), - timeout); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - int timeout; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * 1 pairwise key is possible per AID, this means that the AID - * equals our hw_key_idx. Make sure the WCID starts _after_ the - * last possible shared key entry. - */ - if (crypto->aid > (256 - 32)) - return -ENOSPC; - - key->hw_key_idx = 32 + crypto->aid; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - offset, &key_entry, - sizeof(key_entry), - timeout); - } - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} - -static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int beacon_base; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2x00usb_register_write(rt2x00dev, beacon_base, 0); - - /* - * Enable synchronisation. - */ - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); - rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); -} - -static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - - rt2800usb_bbp_read(rt2x00dev, 1, &r1); - rt2800usb_bbp_read(rt2x00dev, 3, &r3); - - /* - * Configure the TX antenna. - */ - switch ((int)ant->tx) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - /* Do nothing */ - break; - } - - /* - * Configure the RX antenna. - */ - switch ((int)ant->rx) { - case 1: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800usb_bbp_write(rt2x00dev, 3, r3); - rt2800usb_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); - - if (info->tx_power1 < 0) - info->tx_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); - - if (info->tx_power2 < 0) - info->tx_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); - - rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); - rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); - - rt2800usb_rfcsr_write(rt2x00dev, 24, - rt2x00dev->calibration[conf_is_ht40(conf)]); - - rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); -} - -static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info); - else - rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings - */ - rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 86, 0); - - if (rf->channel <= 14) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - rt2800usb_bbp_write(rt2x00dev, 82, 0x62); - rt2800usb_bbp_write(rt2x00dev, 75, 0x46); - } else { - rt2800usb_bbp_write(rt2x00dev, 82, 0x84); - rt2800usb_bbp_write(rt2x00dev, 75, 0x50); - } - } else { - rt2800usb_bbp_write(rt2x00dev, 82, 0xf2); - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - rt2800usb_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800usb_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg); - - tx_pin = 0; - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.tx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - } - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.rx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - - rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - rt2800usb_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2800usb_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - if (conf_is_ht40(conf)) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x1a); - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 70, 0x08); - rt2800usb_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); -} - -static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 reg; - u32 value = TXPOWER_G_TO_DEV(txpower); - u8 r1; - - rt2800usb_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(®, BBP1_TX_POWER, 0); - rt2800usb_bbp_write(rt2x00dev, 1, r1); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, ®); - rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, ®); - rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, ®); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, ®); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, ®); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -} - -static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - } -} - -static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800usb_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2800usb_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800usb_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800usb_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} - -static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) - return 0x1c + (2 * rt2x00dev->lna_gain); - else - return 0x2e + rt2x00dev->lna_gain; - } - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -} - -static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt2800usb_bbp_write(rt2x00dev, 66, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev)); -} - -static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* - * When RSSI is better then -80 increase VGC level with 0x10 - */ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev) + - ((qual->rssi > -80) * 0x10)); -} - -/* * Firmware functions */ static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) @@ -1172,7 +157,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for stable hardware. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); if (reg && reg != ~0) break; msleep(1); @@ -1192,8 +177,8 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, data + offset, length, REGISTER_TIMEOUT32(length)); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); /* * Send firmware request to device to load firmware, @@ -1208,18 +193,18 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, } msleep(10); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); /* * Send signal to firmware during boot time. */ - rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); if ((chipset == 0x3070) || (chipset == 0x3071) || (chipset == 0x3572)) { udelay(200); - rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); udelay(10); } @@ -1227,7 +212,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for device to stabilize. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) break; msleep(1); @@ -1241,536 +226,14 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Initialize firmware. */ - rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); msleep(1); return 0; } /* - * Initialization functions. - */ -static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - /* - * Wait untill BBP and RF are ready. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); - return -EBUSY; - } - - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); - rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); - - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, - USB_MODE_RESET, REGISTER_TIMEOUT); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, ®); - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ - rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg); - - rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, ®); - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ - rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg); - - rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); - rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } else { - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - } - - rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); - rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); - rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); - rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); - if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && - rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); - else - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); - - rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); - rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); - - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); - rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, - IEEE80211_MAX_RTS_THRESHOLD); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); - rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - /* - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 4; i++) - rt2x00usb_register_write(rt2x00dev, - SHARED_KEY_MODE_ENTRY(i), 0); - - for (i = 0; i < 256; i++) { - u32 wcid[2] = { 0xffffffff, 0x00ffffff }; - rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), - wcid, sizeof(wcid)); - - rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); - rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); - } - - /* - * Clear all beacons - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0); - - rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, ®); - rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); - rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, ®); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); - rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg); - - rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, ®); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); - rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg); - - rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); - rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg); - - rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); - rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®); - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, ®); - - return 0; -} - -static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, ®); - if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) - return 0; - - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - /* - * BBP was enabled after firmware was loaded, - * but we need to reactivate it now. - */ - rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) || - rt2800usb_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2800usb_bbp_write(rt2x00dev, 65, 0x2c); - rt2800usb_bbp_write(rt2x00dev, 66, 0x38); - rt2800usb_bbp_write(rt2x00dev, 69, 0x12); - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 73, 0x10); - rt2800usb_bbp_write(rt2x00dev, 81, 0x37); - rt2800usb_bbp_write(rt2x00dev, 82, 0x62); - rt2800usb_bbp_write(rt2x00dev, 83, 0x6a); - rt2800usb_bbp_write(rt2x00dev, 84, 0x99); - rt2800usb_bbp_write(rt2x00dev, 86, 0x00); - rt2800usb_bbp_write(rt2x00dev, 91, 0x04); - rt2800usb_bbp_write(rt2x00dev, 92, 0x00); - rt2800usb_bbp_write(rt2x00dev, 103, 0x00); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 73, 0x12); - } - - if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 84, 0x19); - } - - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 84, 0x99); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2800usb_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, - bool bw40, u8 rfcsr24, u8 filter_target) -{ - unsigned int i; - u8 bbp; - u8 rfcsr; - u8 passband; - u8 stopband; - u8 overtuned = 0; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); - rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * Set power & frequency of passband test tone - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0); - - for (i = 0; i < 100; i++) { - rt2800usb_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800usb_bbp_read(rt2x00dev, 55, &passband); - if (passband) - break; - } - - /* - * Set power & frequency of stopband test tone - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0x06); - - for (i = 0; i < 100; i++) { - rt2800usb_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800usb_bbp_read(rt2x00dev, 55, &stopband); - - if ((passband - stopband) <= filter_target) { - rfcsr24++; - overtuned += ((passband - stopband) == filter_target); - } else - break; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - } - - rfcsr24 -= !!overtuned; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - return rfcsr24; -} - -static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - return 0; - - /* - * Init RF calibration. - */ - rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); - - rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); - rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); - rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); - rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); - rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); - - /* - * Set RX Filter calibration for 20MHz and 40MHz - */ - rt2x00dev->calibration[0] = - rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); - rt2x00dev->calibration[1] = - rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); - - /* - * Set back to initial state - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0); - - rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); - rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * set BBP back to BW20 - */ - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - return 0; -} - -/* * Device state switch handlers. */ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, @@ -1778,11 +241,11 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, (state == STATE_RADIO_RX_ON) || (state == STATE_RADIO_RX_ON_LINK)); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); } static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) @@ -1791,7 +254,7 @@ static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) u32 reg; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) return 0; @@ -1812,25 +275,25 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) * Initialize all registers. */ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || - rt2800usb_init_registers(rt2x00dev) || - rt2800usb_init_bbp(rt2x00dev) || - rt2800usb_init_rfcsr(rt2x00dev))) + rt2800_init_registers(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) return -EIO; - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); udelay(50); - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®); + rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®); rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); /* Don't use bulk in aggregation when working with USB 1.1 */ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, @@ -1844,26 +307,26 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); + rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg); - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); /* * Initialize LED control */ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, word & 0xff, (word >> 8) & 0xff); return 0; @@ -1873,14 +336,14 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); /* Wait for DMA, ignore error */ rt2800usb_wait_wpdma_ready(rt2x00dev); @@ -1892,9 +355,9 @@ static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { if (state == STATE_AWAKE) - rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); else - rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); return 0; } @@ -2048,9 +511,9 @@ static void rt2800usb_write_beacon(struct queue_entry *entry) * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Write entire beacon with descriptor to register. @@ -2093,12 +556,12 @@ static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, return; } - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } } @@ -2124,7 +587,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ memcpy(skbdesc->desc, rxd, skbdesc->desc_len); rxd = (__le32 *)skbdesc->desc; - rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)]; + rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)]; /* * It is now safe to read the descriptor on all architectures. @@ -2135,16 +598,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, rt2x00_desc_read(rxwi, 2, &rxwi2); rt2x00_desc_read(rxwi, 3, &rxwi3); - if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR)) + if (rt2x00_get_field32(rxd0, RXINFO_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); rxdesc->cipher_status = - rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR); + rt2x00_get_field32(rxd0, RXINFO_W0_CIPHER_ERROR); } - if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) { + if (rt2x00_get_field32(rxd0, RXINFO_W0_DECRYPTED)) { /* * Hardware has stripped IV/EIV data from 802.11 frame during * decryption. Unfortunately the descriptor doesn't contain @@ -2159,10 +622,10 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, rxdesc->flags |= RX_FLAG_MMIC_ERROR; } - if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS)) + if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; - if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) { + if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD)) { rxdesc->dev_flags |= RXDONE_L2PAD; skbdesc->flags |= SKBDESC_L2_PADDED; } @@ -2208,402 +671,33 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) { - u16 word; - u8 *mac; - u8 default_lna_gain; - - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { - /* - * There is a max of 2 RX streams for RT2870 series - */ - if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) - rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); - rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if ((word & 0x00ff) == 0x00ff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, - LED_MODE_TXRX_ACTIVITY); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); - EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); - } - - /* - * During the LNA validation we are going to use - * lna0 as correct value. Note that EEPROM_LNA - * is never validated. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); - default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); - if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, - default_lna_gain); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); - if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, - default_lna_gain); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + if (rt2800_efuse_detect(rt2x00dev)) + rt2800_read_eeprom_efuse(rt2x00dev); + else + rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, + EEPROM_SIZE); - return 0; + return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2870, value, reg); - - /* - * The check for rt2860 is not a typo, some rt2870 hardware - * identifies itself as rt2860 in the CSR register. - */ - if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) && - !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) && - !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) && - !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) { - ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); - return -ENODEV; - } - - if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && - !rt2x00_rf(&rt2x00dev->chip, RF2850) && - !rt2x00_rf(&rt2x00dev->chip, RF2720) && - !rt2x00_rf(&rt2x00dev->chip, RF2750) && - !rt2x00_rf(&rt2x00dev->chip, RF3020) && - !rt2x00_rf(&rt2x00dev->chip, RF2020)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); - - /* - * Read frequency offset and RF programming sequence. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) - __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) - __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); - - /* - * Store led settings, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); +static const struct rt2800_ops rt2800usb_rt2800_ops = { + .register_read = rt2x00usb_register_read, + .register_read_lock = rt2x00usb_register_read_lock, + .register_write = rt2x00usb_register_write, + .register_write_lock = rt2x00usb_register_write_lock, - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, - &rt2x00dev->led_mcu_reg); -#endif /* CONFIG_RT2X00_LIB_LEDS */ + .register_multiread = rt2x00usb_register_multiread, + .register_multiwrite = rt2x00usb_register_multiwrite, - return 0; -} - -/* - * RF value list for rt2870 - * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) - */ -static const struct rf_channel rf_vals[] = { - { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, - { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, - { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, - { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, - { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, - { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, - { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, - { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, - { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, - { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, - { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, - { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, - { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, - { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, - { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, - { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, - { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, - { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, - { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, - { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, - { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, - { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, - { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, - { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, - { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, - - /* 802.11 HyperLan 2 */ - { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, - { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, - { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, - { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, - { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, - { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, - { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, - { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, - { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, - { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, - { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, - { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, - { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, - { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, - { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, - { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, - - /* 802.11 UNII */ - { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, - { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, - { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, - { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, - { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, - { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, - { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, - { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, - { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, - { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, - { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, - - /* 802.11 Japan */ - { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, - { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, - { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, - { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, - { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, - { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, - { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, -}; - -/* - * RF value list for rt3070 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_3070[] = { - {1, 241, 2, 2 }, - {2, 241, 2, 7 }, - {3, 242, 2, 2 }, - {4, 242, 2, 7 }, - {5, 243, 2, 2 }, - {6, 243, 2, 7 }, - {7, 244, 2, 2 }, - {8, 244, 2, 7 }, - {9, 245, 2, 2 }, - {10, 245, 2, 7 }, - {11, 246, 2, 2 }, - {12, 246, 2, 7 }, - {13, 247, 2, 2 }, - {14, 248, 2, 4 }, + .regbusy_read = rt2x00usb_regbusy_read, }; -static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power1; - char *tx_power2; - unsigned int i; - u16 eeprom; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Initialize HT information. - */ - spec->ht.ht_supported = true; - spec->ht.cap = - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | - IEEE80211_HT_CAP_GRN_FLD | - IEEE80211_HT_CAP_SGI_20 | - IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_TX_STBC | - IEEE80211_HT_CAP_RX_STBC | - IEEE80211_HT_CAP_PSMP_SUPPORT; - spec->ht.ampdu_factor = 3; - spec->ht.ampdu_density = 4; - spec->ht.mcs.tx_params = - IEEE80211_HT_MCS_TX_DEFINED | - IEEE80211_HT_MCS_TX_RX_DIFF | - ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - - switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { - case 3: - spec->ht.mcs.rx_mask[2] = 0xff; - case 2: - spec->ht.mcs.rx_mask[1] = 0xff; - case 1: - spec->ht.mcs.rx_mask[0] = 0xff; - spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ - break; - } - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(&rt2x00dev->chip, RF2820) || - rt2x00_rf(&rt2x00dev->chip, RF2720)) { - spec->num_channels = 14; - spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || - rt2x00_rf(&rt2x00dev->chip, RF2750)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals); - spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || - rt2x00_rf(&rt2x00dev->chip, RF2020)) { - spec->num_channels = ARRAY_SIZE(rf_vals_3070); - spec->channels = rf_vals_3070; - } - - /* - * Create channel information array - */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); - - for (i = 0; i < 14; i++) { - info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); - } - - if (spec->num_channels > 14) { - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); - - for (i = 14; i < spec->num_channels; i++) { - info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); - } - } - - return 0; -} - static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops; + /* * Allocate eeprom data. */ @@ -2611,14 +705,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - retval = rt2800usb_init_eeprom(rt2x00dev); + retval = rt2800_init_eeprom(rt2x00dev); if (retval) return retval; /* * Initialize hw specifications. */ - retval = rt2800usb_probe_hw_mode(rt2x00dev); + retval = rt2800_probe_hw_mode(rt2x00dev); if (retval) return retval; @@ -2645,162 +739,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) return 0; } -/* - * IEEE80211 stack callback functions. - */ -static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, - u32 *iv32, u16 *iv16) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - - offset = MAC_IVEIV_ENTRY(hw_key_idx); - rt2x00usb_register_multiread(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); -} - -static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -} - -static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues/ - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ - offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); - rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - return 0; -} - -static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, ®); - tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; - rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, ®); - tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); - - return tsf; -} - -static const struct ieee80211_ops rt2800usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_tim = rt2x00mac_set_tim, - .set_key = rt2x00mac_set_key, - .get_stats = rt2x00mac_get_stats, - .get_tkip_seq = rt2800usb_get_tkip_seq, - .set_rts_threshold = rt2800usb_set_rts_threshold, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800usb_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt2800usb_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, -}; - static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .probe_hw = rt2800usb_probe_hw, .get_firmware_name = rt2800usb_get_firmware_name, @@ -2810,10 +748,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt2800usb_set_device_state, - .rfkill_poll = rt2800usb_rfkill_poll, - .link_stats = rt2800usb_link_stats, - .reset_tuner = rt2800usb_reset_tuner, - .link_tuner = rt2800usb_link_tuner, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2800usb_write_beacon, @@ -2821,19 +759,19 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .kick_tx_queue = rt2800usb_kick_tx_queue, .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt2800usb_fill_rxdone, - .config_shared_key = rt2800usb_config_shared_key, - .config_pairwise_key = rt2800usb_config_pairwise_key, - .config_filter = rt2800usb_config_filter, - .config_intf = rt2800usb_config_intf, - .config_erp = rt2800usb_config_erp, - .config_ant = rt2800usb_config_ant, - .config = rt2800usb_config, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, }; static const struct data_queue_desc rt2800usb_queue_rx = { .entry_num = RX_ENTRIES, .data_size = AGGREGATION_SIZE, - .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE, + .desc_size = RXINFO_DESC_SIZE + RXWI_DESC_SIZE, .priv_size = sizeof(struct queue_entry_priv_usb), }; @@ -2852,19 +790,20 @@ static const struct data_queue_desc rt2800usb_queue_bcn = { }; static const struct rt2x00_ops rt2800usb_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 8, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt2800usb_queue_rx, - .tx = &rt2800usb_queue_tx, - .bcn = &rt2800usb_queue_bcn, - .lib = &rt2800usb_rt2x00_ops, - .hw = &rt2800usb_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 8, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, + .rx = &rt2800usb_queue_rx, + .tx = &rt2800usb_queue_tx, + .bcn = &rt2800usb_queue_bcn, + .lib = &rt2800usb_rt2x00_ops, + .hw = &rt2800_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800usb_rt2x00debug, + .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; @@ -2886,17 +825,23 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Amit */ { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Askey */ + { USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) }, /* ASUS */ { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Belkin */ { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2905,6 +850,8 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Buffalo */ { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Cisco */ + { USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Conceptronic */ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2920,6 +867,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) }, /* D-Link */ @@ -2931,18 +880,24 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Edimax */ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Encore */ { USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) }, /* EnGenius */ { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2956,7 +911,10 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) }, /* I-O DATA */ + { USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) }, /* LevelOne */ { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2971,8 +929,18 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Motorola */ { USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* MSI */ + { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Ovislink */ { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Para */ + { USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Pegatron */ { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2988,8 +956,6 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Quanta */ { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Ralink */ - { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) }, - { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -3013,7 +979,12 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x004a), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x004d), USB_DEVICE_DATA(&rt2800usb_ops) }, /* SMC */ { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -3022,6 +993,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Sparklan */ @@ -3039,6 +1012,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zyxel */ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h index 4d9991c9a51..1e4340a182e 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -1,5 +1,9 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -28,288 +32,10 @@ #define RT2800USB_H /* - * RF chip defines. - * - * RF2820 2.4G 2T3R - * RF2850 2.4G/5G 2T3R - * RF2720 2.4G 1T2R - * RF2750 2.4G/5G 1T2R - * RF3020 2.4G 1T1R - * RF2020 2.4G B/G - * RF3021 2.4G 1T2R - * RF3022 2.4G 2T2R - * RF3052 2.4G 2T2R - */ -#define RF2820 0x0001 -#define RF2850 0x0002 -#define RF2720 0x0003 -#define RF2750 0x0004 -#define RF3020 0x0005 -#define RF2020 0x0006 -#define RF3021 0x0007 -#define RF3022 0x0008 -#define RF3052 0x0009 - -/* - * RT2870 version - */ -#define RT2860C_VERSION 0x28600100 -#define RT2860D_VERSION 0x28600101 -#define RT2880E_VERSION 0x28720200 -#define RT2883_VERSION 0x28830300 -#define RT3070_VERSION 0x30700200 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x1000 -#define CSR_REG_SIZE 0x0800 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0110 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0080 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* * USB registers. */ /* - * HOST-MCU shared memory - */ -#define HOST_CMD_CSR 0x0404 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) - -/* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c - */ -#define INT_SOURCE_CSR 0x0200 -#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) -#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) -#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - */ -#define INT_MASK_CSR 0x0204 -#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_MASK_CSR_TBTT FIELD32(0x00000800) -#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) -#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * WPDMA_GLO_CFG - */ -#define WPDMA_GLO_CFG 0x0208 -#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) -#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) -#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) -#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) -#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) -#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) -#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) -#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) -#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) - -/* - * WPDMA_RST_IDX - */ -#define WPDMA_RST_IDX 0x020c -#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) -#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) -#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) -#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) -#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) -#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) -#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) - -/* - * DELAY_INT_CFG - */ -#define DELAY_INT_CFG 0x0210 -#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) -#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) -#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) -#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) -#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) -#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) - -/* - * WMM_AIFSN_CFG: Aifsn for each EDCA AC - * AIFSN0: AC_BE - * AIFSN1: AC_BK - * AIFSN1: AC_VI - * AIFSN1: AC_VO - */ -#define WMM_AIFSN_CFG 0x0214 -#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) -#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) -#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) -#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) - -/* - * WMM_CWMIN_CSR: CWmin for each EDCA AC - * CWMIN0: AC_BE - * CWMIN1: AC_BK - * CWMIN1: AC_VI - * CWMIN1: AC_VO - */ -#define WMM_CWMIN_CFG 0x0218 -#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) -#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) -#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) -#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) - -/* - * WMM_CWMAX_CSR: CWmax for each EDCA AC - * CWMAX0: AC_BE - * CWMAX1: AC_BK - * CWMAX1: AC_VI - * CWMAX1: AC_VO - */ -#define WMM_CWMAX_CFG 0x021c -#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) -#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) -#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) -#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) - -/* - * AC_TXOP0: AC_BK/AC_BE TXOP register - * AC0TXOP: AC_BK in unit of 32us - * AC1TXOP: AC_BE in unit of 32us - */ -#define WMM_TXOP0_CFG 0x0220 -#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) -#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) - -/* - * AC_TXOP1: AC_VO/AC_VI TXOP register - * AC2TXOP: AC_VI in unit of 32us - * AC3TXOP: AC_VO in unit of 32us - */ -#define WMM_TXOP1_CFG 0x0224 -#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) -#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) - -/* - * GPIO_CTRL_CFG: - */ -#define GPIO_CTRL_CFG 0x0228 -#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) -#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) -#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) -#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) -#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) -#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) -#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) -#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) -#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) - -/* - * MCU_CMD_CFG - */ -#define MCU_CMD_CFG 0x022c - -/* - * AC_BK register offsets - */ -#define TX_BASE_PTR0 0x0230 -#define TX_MAX_CNT0 0x0234 -#define TX_CTX_IDX0 0x0238 -#define TX_DTX_IDX0 0x023c - -/* - * AC_BE register offsets - */ -#define TX_BASE_PTR1 0x0240 -#define TX_MAX_CNT1 0x0244 -#define TX_CTX_IDX1 0x0248 -#define TX_DTX_IDX1 0x024c - -/* - * AC_VI register offsets - */ -#define TX_BASE_PTR2 0x0250 -#define TX_MAX_CNT2 0x0254 -#define TX_CTX_IDX2 0x0258 -#define TX_DTX_IDX2 0x025c - -/* - * AC_VO register offsets - */ -#define TX_BASE_PTR3 0x0260 -#define TX_MAX_CNT3 0x0264 -#define TX_CTX_IDX3 0x0268 -#define TX_DTX_IDX3 0x026c - -/* - * HCCA register offsets - */ -#define TX_BASE_PTR4 0x0270 -#define TX_MAX_CNT4 0x0274 -#define TX_CTX_IDX4 0x0278 -#define TX_DTX_IDX4 0x027c - -/* - * MGMT register offsets - */ -#define TX_BASE_PTR5 0x0280 -#define TX_MAX_CNT5 0x0284 -#define TX_CTX_IDX5 0x0288 -#define TX_DTX_IDX5 0x028c - -/* - * RX register offsets - */ -#define RX_BASE_PTR 0x0290 -#define RX_MAX_CNT 0x0294 -#define RX_CRX_IDX 0x0298 -#define RX_DRX_IDX 0x029c - -/* * USB_DMA_CFG * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. @@ -343,1448 +69,16 @@ #define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff) /* - * PBF_SYS_CTRL - * HOST_RAM_WRITE: enable Host program ram write selection - */ -#define PBF_SYS_CTRL 0x0400 -#define PBF_SYS_CTRL_READY FIELD32(0x00000080) -#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define PBF_CFG 0x0408 -#define PBF_MAX_PCNT 0x040c -#define PBF_CTRL 0x0410 -#define PBF_INT_STA 0x0414 -#define PBF_INT_ENA 0x0418 - -/* - * BCN_OFFSET0: - */ -#define BCN_OFFSET0 0x042c -#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) -#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) -#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) -#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) - -/* - * BCN_OFFSET1: - */ -#define BCN_OFFSET1 0x0430 -#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) -#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) -#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) -#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define TXRXQ_PCNT 0x0438 -#define PBF_DBG 0x043c - -/* - * RF registers - */ -#define RF_CSR_CFG 0x0500 -#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) -#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -#define RF_CSR_CFG_BUSY FIELD32(0x00020000) - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - * ASIC_REV: 0 - * ASIC_VER: 2870 - */ -#define MAC_CSR0 0x1000 -#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) -#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) - -/* - * MAC_SYS_CTRL: - */ -#define MAC_SYS_CTRL 0x1004 -#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) -#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) -#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) -#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) -#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) -#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) -#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) -#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) - -/* - * MAC_ADDR_DW0: STA MAC register 0 - */ -#define MAC_ADDR_DW0 0x1008 -#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_ADDR_DW1: STA MAC register 1 - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_ADDR_DW1 0x100c -#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_BSSID_DW0: BSSID register 0 - */ -#define MAC_BSSID_DW0 0x1010 -#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_BSSID_DW1: BSSID register 1 - * BSS_ID_MASK: - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) - * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - */ -#define MAC_BSSID_DW1 0x1014 -#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) -#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) - -/* - * MAX_LEN_CFG: Maximum frame length register. - * MAX_MPDU: rt2860b max 16k bytes - * MAX_PSDU: Maximum PSDU length - * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 - */ -#define MAX_LEN_CFG 0x1018 -#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) -#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) -#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) -#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) - -/* - * BBP_CSR_CFG: BBP serial control register - * VALUE: Register value to program into BBP - * REG_NUM: Selected BBP register - * READ_CONTROL: 0 write BBP, 1 read BBP - * BUSY: ASIC is busy executing BBP commands - * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks - * BBP_RW_MODE: 0 serial, 1 paralell - */ -#define BBP_CSR_CFG 0x101c -#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) -#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) -#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) -#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) -#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) -#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) - -/* - * RF_CSR_CFG0: RF control register - * REGID_AND_VALUE: Register value to program into RF - * BITWIDTH: Selected RF register - * STANDBYMODE: 0 high when standby, 1 low when standby - * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate - * BUSY: ASIC is busy executing RF commands - */ -#define RF_CSR_CFG0 0x1020 -#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) -#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) -#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) -#define RF_CSR_CFG0_SEL FIELD32(0x40000000) -#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) - -/* - * RF_CSR_CFG1: RF control register - * REGID_AND_VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG1 0x1024 -#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) - -/* - * RF_CSR_CFG2: RF control register - * VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG2 0x1028 -#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) - -/* - * LED_CFG: LED control - * color LED's: - * 0: off - * 1: blinking upon TX2 - * 2: periodic slow blinking - * 3: always on - * LED polarity: - * 0: active low - * 1: active high - */ -#define LED_CFG 0x102c -#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) -#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) -#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) -#define LED_CFG_R_LED_MODE FIELD32(0x03000000) -#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) -#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) -#define LED_CFG_LED_POLAR FIELD32(0x40000000) - -/* - * XIFS_TIME_CFG: MAC timing - * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX - * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX - * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX - * when MAC doesn't reference BBP signal BBRXEND - * EIFS: unit 1us - * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer - * - */ -#define XIFS_TIME_CFG 0x1100 -#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) -#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) -#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) -#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) -#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) - -/* - * BKOFF_SLOT_CFG: - */ -#define BKOFF_SLOT_CFG 0x1104 -#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) -#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) - -/* - * NAV_TIME_CFG: - */ -#define NAV_TIME_CFG 0x1108 -#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) -#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) -#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) -#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) - -/* - * CH_TIME_CFG: count as channel busy - */ -#define CH_TIME_CFG 0x110c - -/* - * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us - */ -#define PBF_LIFE_TIMER 0x1110 - -/* - * BCN_TIME_CFG: - * BEACON_INTERVAL: in unit of 1/16 TU - * TSF_TICKING: Enable TSF auto counting - * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode - * BEACON_GEN: Enable beacon generator - */ -#define BCN_TIME_CFG 0x1114 -#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) -#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) -#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) -#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) -#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) -#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) - -/* - * TBTT_SYNC_CFG: - */ -#define TBTT_SYNC_CFG 0x1118 - -/* - * TSF_TIMER_DW0: Local lsb TSF timer, read-only - */ -#define TSF_TIMER_DW0 0x111c -#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) - -/* - * TSF_TIMER_DW1: Local msb TSF timer, read-only - */ -#define TSF_TIMER_DW1 0x1120 -#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) - -/* - * TBTT_TIMER: TImer remains till next TBTT, read-only - */ -#define TBTT_TIMER 0x1124 - -/* - * INT_TIMER_CFG: - */ -#define INT_TIMER_CFG 0x1128 - -/* - * INT_TIMER_EN: GP-timer and pre-tbtt Int enable - */ -#define INT_TIMER_EN 0x112c - -/* - * CH_IDLE_STA: channel idle time - */ -#define CH_IDLE_STA 0x1130 - -/* - * CH_BUSY_STA: channel busy time - */ -#define CH_BUSY_STA 0x1134 - -/* - * MAC_STATUS_CFG: - * BBP_RF_BUSY: When set to 0, BBP and RF are stable. - * if 1 or higher one of the 2 registers is busy. - */ -#define MAC_STATUS_CFG 0x1200 -#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) - -/* - * PWR_PIN_CFG: - */ -#define PWR_PIN_CFG 0x1204 - -/* - * AUTOWAKEUP_CFG: Manual power control / status register - * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set - * AUTOWAKE: 0:sleep, 1:awake - */ -#define AUTOWAKEUP_CFG 0x1208 -#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) -#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) -#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) - -/* - * EDCA_AC0_CFG: - */ -#define EDCA_AC0_CFG 0x1300 -#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC1_CFG: - */ -#define EDCA_AC1_CFG 0x1304 -#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC2_CFG: - */ -#define EDCA_AC2_CFG 0x1308 -#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC3_CFG: - */ -#define EDCA_AC3_CFG 0x130c -#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_TID_AC_MAP: - */ -#define EDCA_TID_AC_MAP 0x1310 - -/* - * TX_PWR_CFG_0: - */ -#define TX_PWR_CFG_0 0x1314 -#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) -#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) -#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) -#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_1: - */ -#define TX_PWR_CFG_1 0x1318 -#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) -#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) -#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) -#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_2: - */ -#define TX_PWR_CFG_2 0x131c -#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) -#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) -#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) -#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) -#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) -#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) -#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) -#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_3: - */ -#define TX_PWR_CFG_3 0x1320 -#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) -#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) -#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) -#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) -#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) -#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_4: - */ -#define TX_PWR_CFG_4 0x1324 -#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) -#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) -#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) -#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) - -/* - * TX_PIN_CFG: - */ -#define TX_PIN_CFG 0x1328 -#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) -#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) -#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) -#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) -#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) -#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) -#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) -#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) -#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) -#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) -#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) -#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) -#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) -#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) -#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) -#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) -#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) -#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) -#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) -#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) - -/* - * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz - */ -#define TX_BAND_CFG 0x132c -#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) -#define TX_BAND_CFG_A FIELD32(0x00000002) -#define TX_BAND_CFG_BG FIELD32(0x00000004) - -/* - * TX_SW_CFG0: - */ -#define TX_SW_CFG0 0x1330 - -/* - * TX_SW_CFG1: - */ -#define TX_SW_CFG1 0x1334 - -/* - * TX_SW_CFG2: - */ -#define TX_SW_CFG2 0x1338 - -/* - * TXOP_THRES_CFG: - */ -#define TXOP_THRES_CFG 0x133c - -/* - * TXOP_CTRL_CFG: - */ -#define TXOP_CTRL_CFG 0x1340 - -/* - * TX_RTS_CFG: - * RTS_THRES: unit:byte - * RTS_FBK_EN: enable rts rate fallback - */ -#define TX_RTS_CFG 0x1344 -#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) -#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) -#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) - -/* - * TX_TIMEOUT_CFG: - * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us - * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure - * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. - * it is recommended that: - * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) - */ -#define TX_TIMEOUT_CFG 0x1348 -#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) -#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) -#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) - -/* - * TX_RTY_CFG: - * SHORT_RTY_LIMIT: short retry limit - * LONG_RTY_LIMIT: long retry limit - * LONG_RTY_THRE: Long retry threshoold - * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * AGG_RTY_MODE: Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable - */ -#define TX_RTY_CFG 0x134c -#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) -#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) -#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) -#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) -#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) -#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) - -/* - * TX_LINK_CFG: - * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us - * MFB_ENABLE: TX apply remote MFB 1:enable - * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable - * 0: not apply remote remote unsolicit (MFS=7) - * TX_MRQ_EN: MCS request TX enable - * TX_RDG_EN: RDG TX enable - * TX_CF_ACK_EN: Piggyback CF-ACK enable - * REMOTE_MFB: remote MCS feedback - * REMOTE_MFS: remote MCS feedback sequence number - */ -#define TX_LINK_CFG 0x1350 -#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) -#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) -#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) -#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) -#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) -#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) -#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) -#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) - -/* - * HT_FBK_CFG0: - */ -#define HT_FBK_CFG0 0x1354 -#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) -#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) -#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) -#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) -#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) -#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) -#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) -#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) - -/* - * HT_FBK_CFG1: - */ -#define HT_FBK_CFG1 0x1358 -#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) -#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) -#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) -#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) -#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) -#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) -#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) -#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG0: - */ -#define LG_FBK_CFG0 0x135c -#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) -#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) -#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) -#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) -#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG1: - */ -#define LG_FBK_CFG1 0x1360 -#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) - -/* - * CCK_PROT_CFG: CCK Protection - * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) - * PROTECT_CTRL: Protection control frame type for CCK TX - * 0:none, 1:RTS/CTS, 2:CTS-to-self - * PROTECT_NAV: TXOP protection type for CCK TX - * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect - * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow - * RTS_TH_EN: RTS threshold enable on CCK TX - */ -#define CCK_PROT_CFG 0x1364 -#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * OFDM_PROT_CFG: OFDM Protection - */ -#define OFDM_PROT_CFG 0x1368 -#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM20_PROT_CFG: MM20 Protection - */ -#define MM20_PROT_CFG 0x136c -#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM40_PROT_CFG: MM40 Protection - */ -#define MM40_PROT_CFG 0x1370 -#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF20_PROT_CFG: GF20 Protection - */ -#define GF20_PROT_CFG 0x1374 -#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF40_PROT_CFG: GF40 Protection - */ -#define GF40_PROT_CFG 0x1378 -#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * EXP_CTS_TIME: - */ -#define EXP_CTS_TIME 0x137c - -/* - * EXP_ACK_TIME: - */ -#define EXP_ACK_TIME 0x1380 - -/* - * RX_FILTER_CFG: RX configuration register. - */ -#define RX_FILTER_CFG 0x1400 -#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) -#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) -#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) -#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) -#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) -#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) -#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) -#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) -#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) -#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) -#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) -#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) -#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) -#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) -#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) -#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) -#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) - -/* - * AUTO_RSP_CFG: - * AUTORESPONDER: 0: disable, 1: enable - * BAC_ACK_POLICY: 0:long, 1:short preamble - * CTS_40_MMODE: Response CTS 40MHz duplicate mode - * CTS_40_MREF: Response CTS 40MHz duplicate mode - * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble - * DUAL_CTS_EN: Power bit value in control frame - * ACK_CTS_PSM_BIT:Power bit value in control frame - */ -#define AUTO_RSP_CFG 0x1404 -#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) -#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) -#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) -#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) -#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) -#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) -#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) - -/* - * LEGACY_BASIC_RATE: - */ -#define LEGACY_BASIC_RATE 0x1408 - -/* - * HT_BASIC_RATE: - */ -#define HT_BASIC_RATE 0x140c - -/* - * HT_CTRL_CFG: - */ -#define HT_CTRL_CFG 0x1410 - -/* - * SIFS_COST_CFG: - */ -#define SIFS_COST_CFG 0x1414 - -/* - * RX_PARSER_CFG: - * Set NAV for all received frames - */ -#define RX_PARSER_CFG 0x1418 - -/* - * TX_SEC_CNT0: - */ -#define TX_SEC_CNT0 0x1500 - -/* - * RX_SEC_CNT0: - */ -#define RX_SEC_CNT0 0x1504 - -/* - * CCMP_FC_MUTE: - */ -#define CCMP_FC_MUTE 0x1508 - -/* - * TXOP_HLDR_ADDR0: - */ -#define TXOP_HLDR_ADDR0 0x1600 - -/* - * TXOP_HLDR_ADDR1: - */ -#define TXOP_HLDR_ADDR1 0x1604 - -/* - * TXOP_HLDR_ET: - */ -#define TXOP_HLDR_ET 0x1608 - -/* - * QOS_CFPOLL_RA_DW0: - */ -#define QOS_CFPOLL_RA_DW0 0x160c - -/* - * QOS_CFPOLL_RA_DW1: - */ -#define QOS_CFPOLL_RA_DW1 0x1610 - -/* - * QOS_CFPOLL_QC: - */ -#define QOS_CFPOLL_QC 0x1614 - -/* - * RX_STA_CNT0: RX PLCP error count & RX CRC error count - */ -#define RX_STA_CNT0 0x1700 -#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) -#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT1: RX False CCA count & RX LONG frame count - */ -#define RX_STA_CNT1 0x1704 -#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) -#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT2: - */ -#define RX_STA_CNT2 0x1708 -#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) -#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) - -/* - * TX_STA_CNT0: TX Beacon count - */ -#define TX_STA_CNT0 0x170c -#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_CNT1: TX tx count - */ -#define TX_STA_CNT1 0x1710 -#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) -#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) - -/* - * TX_STA_CNT2: TX tx count - */ -#define TX_STA_CNT2 0x1714 -#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_FIFO: TX Result for specific PID status fifo register - */ -#define TX_STA_FIFO 0x1718 -#define TX_STA_FIFO_VALID FIELD32(0x00000001) -#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) -#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) -#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) -#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) -#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) -#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) - -/* - * TX_AGG_CNT: Debug counter - */ -#define TX_AGG_CNT 0x171c -#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT0: - */ -#define TX_AGG_CNT0 0x1720 -#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT1: - */ -#define TX_AGG_CNT1 0x1724 -#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT2: - */ -#define TX_AGG_CNT2 0x1728 -#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT3: - */ -#define TX_AGG_CNT3 0x172c -#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT4: - */ -#define TX_AGG_CNT4 0x1730 -#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT5: - */ -#define TX_AGG_CNT5 0x1734 -#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT6: - */ -#define TX_AGG_CNT6 0x1738 -#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT7: - */ -#define TX_AGG_CNT7 0x173c -#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) - -/* - * MPDU_DENSITY_CNT: - * TX_ZERO_DEL: TX zero length delimiter count - * RX_ZERO_DEL: RX zero length delimiter count - */ -#define MPDU_DENSITY_CNT 0x1740 -#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) -#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) - -/* - * Security key table memory. - * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry - * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry - * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry - * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry - * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry - * SHARED_KEY_MODE_BASE: 4 bits * 32-entry - */ -#define MAC_WCID_BASE 0x1800 -#define PAIRWISE_KEY_TABLE_BASE 0x4000 -#define MAC_IVEIV_TABLE_BASE 0x6000 -#define MAC_WCID_ATTRIBUTE_BASE 0x6800 -#define SHARED_KEY_TABLE_BASE 0x6c00 -#define SHARED_KEY_MODE_BASE 0x7000 - -#define MAC_WCID_ENTRY(__idx) \ - ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) -#define PAIRWISE_KEY_ENTRY(__idx) \ - ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -#define MAC_IVEIV_ENTRY(__idx) \ - ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) -#define MAC_WCID_ATTR_ENTRY(__idx) \ - ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) -#define SHARED_KEY_ENTRY(__idx) \ - ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -#define SHARED_KEY_MODE_ENTRY(__idx) \ - ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) - -struct mac_wcid_entry { - u8 mac[6]; - u8 reserved[2]; -} __attribute__ ((packed)); - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __attribute__ ((packed)); - -struct mac_iveiv_entry { - u8 iv[8]; -} __attribute__ ((packed)); - -/* - * MAC_WCID_ATTRIBUTE: - */ -#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) -#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) -#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) - -/* - * SHARED_KEY_MODE: - */ -#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) -#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) -#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) -#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) -#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) -#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) -#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) -#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) - -/* - * HOST-MCU communication - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - */ -#define H2M_MAILBOX_CSR 0x7010 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * H2M_MAILBOX_CID: - */ -#define H2M_MAILBOX_CID 0x7014 -#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) -#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) - -/* - * H2M_MAILBOX_STATUS: - */ -#define H2M_MAILBOX_STATUS 0x701c - -/* - * H2M_INT_SRC: - */ -#define H2M_INT_SRC 0x7024 - -/* - * H2M_BBP_AGENT: - */ -#define H2M_BBP_AGENT 0x7028 - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD8(0x1f) -#define MCU_LEDCS_POLARITY FIELD8(0x01) - -/* - * HW_CS_CTS_BASE: - * Carrier-sense CTS frame base address. - * It's where mac stores carrier-sense frame for carrier-sense function. - */ -#define HW_CS_CTS_BASE 0x7700 - -/* - * HW_DFS_CTS_BASE: - * FS CTS frame base address. It's where mac stores CTS frame for DFS. - */ -#define HW_DFS_CTS_BASE 0x7780 - -/* - * TXRX control registers - base address 0x3000 - */ - -/* - * TXRX_CSR1: - * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. - */ -#define TXRX_CSR1 0x77d0 - -/* - * HW_DEBUG_SETTING_BASE: - * since NULL frame won't be that long (256 byte) - * We steal 16 tail bytes to save debugging settings - */ -#define HW_DEBUG_SETTING_BASE 0x77f0 -#define HW_DEBUG_SETTING_BASE2 0x7770 - -/* - * HW_BEACON_BASE - * In order to support maximum 8 MBSS and its maximum length - * is 512 bytes for each beacon - * Three section discontinue memory segments will be used. - * 1. The original region for BCN 0~3 - * 2. Extract memory from FCE table for BCN 4~5 - * 3. Extract memory from Pair-wise key table for BCN 6~7 - * It occupied those memory of wcid 238~253 for BCN 6 - * and wcid 222~237 for BCN 7 - * - * IMPORTANT NOTE: Not sure why legacy driver does this, - * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. - */ -#define HW_BEACON_BASE0 0x7800 -#define HW_BEACON_BASE1 0x7a00 -#define HW_BEACON_BASE2 0x7c00 -#define HW_BEACON_BASE3 0x7e00 -#define HW_BEACON_BASE4 0x7200 -#define HW_BEACON_BASE5 0x7400 -#define HW_BEACON_BASE6 0x5dc0 -#define HW_BEACON_BASE7 0x5bc0 - -#define HW_BEACON_OFFSET(__index) \ - ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ - (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ - (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) - -/* * 8051 firmware image. */ #define FIRMWARE_RT2870 "rt2870.bin" #define FIRMWARE_IMAGE_BASE 0x3000 /* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * BBP 1: TX Antenna - */ -#define BBP1_TX_POWER FIELD8(0x07) -#define BBP1_TX_ANTENNA FIELD8(0x18) - -/* - * BBP 3: RX Antenna - */ -#define BBP3_RX_ANTENNA FIELD8(0x18) -#define BBP3_HT40_PLUS FIELD8(0x20) - -/* - * BBP 4: Bandwidth - */ -#define BBP4_TX_BF FIELD8(0x01) -#define BBP4_BANDWIDTH FIELD8(0x18) - -/* - * RFCSR registers - * The wordsize of the RFCSR is 8 bits. - */ - -/* - * RFCSR 6: - */ -#define RFCSR6_R FIELD8(0x03) - -/* - * RFCSR 7: - */ -#define RFCSR7_RF_TUNING FIELD8(0x01) - -/* - * RFCSR 12: - */ -#define RFCSR12_TX_POWER FIELD8(0x1f) - -/* - * RFCSR 22: - */ -#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) - -/* - * RFCSR 23: - */ -#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) - -/* - * RFCSR 30: - */ -#define RFCSR30_RF_CALIBRATION FIELD8(0x80) - -/* - * RF registers - */ - -/* - * RF 2 - */ -#define RF2_ANTENNA_RX2 FIELD32(0x00000040) -#define RF2_ANTENNA_TX1 FIELD32(0x00004000) -#define RF2_ANTENNA_RX1 FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TXPOWER_G FIELD32(0x00003e00) -#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) -#define RF3_TXPOWER_A FIELD32(0x00003c00) - -/* - * RF 4 - */ -#define RF4_TXPOWER_G FIELD32(0x000007c0) -#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) -#define RF4_TXPOWER_A FIELD32(0x00000780) -#define RF4_FREQ_OFFSET FIELD32(0x001f8000) -#define RF4_HT40 FIELD32(0x00200000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * EEPROM Version - */ -#define EEPROM_VERSION 0x0001 -#define EEPROM_VERSION_FAE FIELD16(0x00ff) -#define EEPROM_VERSION_VERSION FIELD16(0xff00) - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM ANTENNA config - * RXPATH: 1: 1R, 2: 2R, 3: 3R - * TXPATH: 1: 1T, 2: 2T - */ -#define EEPROM_ANTENNA 0x001a -#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) -#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) - -/* - * EEPROM NIC config - * CARDBUS_ACCEL: 0 - enable, 1 - disable - */ -#define EEPROM_NIC 0x001b -#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) -#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) -#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) -#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) -#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) -#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) -#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) -#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) -#define EEPROM_NIC_BW40M_A FIELD16(0x0200) - -/* - * EEPROM frequency - */ -#define EEPROM_FREQ 0x001d -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) -#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) - -/* - * EEPROM LED - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED1 0x001e -#define EEPROM_LED2 0x001f -#define EEPROM_LED3 0x0020 -#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM LNA - */ -#define EEPROM_LNA 0x0022 -#define EEPROM_LNA_BG FIELD16(0x00ff) -#define EEPROM_LNA_A0 FIELD16(0xff00) - -/* - * EEPROM RSSI BG offset - */ -#define EEPROM_RSSI_BG 0x0023 -#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI BG2 offset - */ -#define EEPROM_RSSI_BG2 0x0024 -#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) - -/* - * EEPROM RSSI A offset - */ -#define EEPROM_RSSI_A 0x0025 -#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI A2 offset - */ -#define EEPROM_RSSI_A2 0x0026 -#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) - -/* - * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. - * This is delta in 40MHZ. - * VALUE: Tx Power dalta value (MAX=4) - * TYPE: 1: Plus the delta value, 0: minus the delta value - * TXPOWER: Enable: - */ -#define EEPROM_TXPOWER_DELTA 0x0028 -#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) -#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) -#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) - -/* - * EEPROM TXPOWER 802.11BG - */ -#define EEPROM_TXPOWER_BG1 0x0029 -#define EEPROM_TXPOWER_BG2 0x0030 -#define EEPROM_TXPOWER_BG_SIZE 7 -#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A1 0x003c -#define EEPROM_TXPOWER_A2 0x0053 -#define EEPROM_TXPOWER_A_SIZE 6 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM TXpower byrate: 20MHZ power - */ -#define EEPROM_TXPOWER_BYRATE 0x006f - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0078 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * MCU mailbox commands. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_RADIO_OFF 0x35 -#define MCU_CURRENT 0x36 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x51 -#define MCU_LED_1 0x52 -#define MCU_LED_2 0x53 -#define MCU_LED_3 0x54 -#define MCU_RADAR 0x60 -#define MCU_BOOT_SIGNAL 0x72 -#define MCU_BBP_SIGNAL 0x80 -#define MCU_POWER_SAVE 0x83 - -/* - * MCU mailbox tokens - */ -#define TOKEN_WAKUP 3 - -/* * DMA descriptor defines. */ -#define TXD_DESC_SIZE ( 4 * sizeof(__le32) ) #define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) ) -#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 1 * sizeof(__le32) ) -#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_SD_PTR0 FIELD32(0xffffffff) - -/* - * Word1 - */ -#define TXD_W1_SD_LEN1 FIELD32(0x00003fff) -#define TXD_W1_LAST_SEC1 FIELD32(0x00004000) -#define TXD_W1_BURST FIELD32(0x00008000) -#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000) -#define TXD_W1_LAST_SEC0 FIELD32(0x40000000) -#define TXD_W1_DMA_DONE FIELD32(0x80000000) - -/* - * Word2 - */ -#define TXD_W2_SD_PTR1 FIELD32(0xffffffff) - -/* - * Word3 - * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI - * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. - * 0:MGMT, 1:HCCA 2:EDCA - */ -#define TXD_W3_WIV FIELD32(0x01000000) -#define TXD_W3_QSEL FIELD32(0x06000000) -#define TXD_W3_TCO FIELD32(0x20000000) -#define TXD_W3_UCO FIELD32(0x40000000) -#define TXD_W3_ICO FIELD32(0x80000000) +#define RXINFO_DESC_SIZE ( 1 * sizeof(__le32) ) /* * TX Info structure @@ -1807,52 +101,6 @@ struct mac_iveiv_entry { #define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) /* - * TX WI structure - */ - -/* - * Word0 - * FRAG: 1 To inform TKIP engine this is a fragment. - * MIMO_PS: The remote peer is in dynamic MIMO-PS mode - * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs - * BW: Channel bandwidth 20MHz or 40 MHz - * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED - */ -#define TXWI_W0_FRAG FIELD32(0x00000001) -#define TXWI_W0_MIMO_PS FIELD32(0x00000002) -#define TXWI_W0_CF_ACK FIELD32(0x00000004) -#define TXWI_W0_TS FIELD32(0x00000008) -#define TXWI_W0_AMPDU FIELD32(0x00000010) -#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) -#define TXWI_W0_TX_OP FIELD32(0x00000300) -#define TXWI_W0_MCS FIELD32(0x007f0000) -#define TXWI_W0_BW FIELD32(0x00800000) -#define TXWI_W0_SHORT_GI FIELD32(0x01000000) -#define TXWI_W0_STBC FIELD32(0x06000000) -#define TXWI_W0_IFS FIELD32(0x08000000) -#define TXWI_W0_PHYMODE FIELD32(0xc0000000) - -/* - * Word1 - */ -#define TXWI_W1_ACK FIELD32(0x00000001) -#define TXWI_W1_NSEQ FIELD32(0x00000002) -#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) -#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) -#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define TXWI_W1_PACKETID FIELD32(0xf0000000) - -/* - * Word2 - */ -#define TXWI_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - */ -#define TXWI_W3_EIV FIELD32(0xffffffff) - -/* * RX descriptor format for RX Ring. */ @@ -1867,85 +115,25 @@ struct mac_iveiv_entry { * AMSDU: rx with 802.3 header, not 802.11 header. */ -#define RXD_W0_BA FIELD32(0x00000001) -#define RXD_W0_DATA FIELD32(0x00000002) -#define RXD_W0_NULLDATA FIELD32(0x00000004) -#define RXD_W0_FRAG FIELD32(0x00000008) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010) -#define RXD_W0_MULTICAST FIELD32(0x00000020) -#define RXD_W0_BROADCAST FIELD32(0x00000040) -#define RXD_W0_MY_BSS FIELD32(0x00000080) -#define RXD_W0_CRC_ERROR FIELD32(0x00000100) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600) -#define RXD_W0_AMSDU FIELD32(0x00000800) -#define RXD_W0_HTC FIELD32(0x00001000) -#define RXD_W0_RSSI FIELD32(0x00002000) -#define RXD_W0_L2PAD FIELD32(0x00004000) -#define RXD_W0_AMPDU FIELD32(0x00008000) -#define RXD_W0_DECRYPTED FIELD32(0x00010000) -#define RXD_W0_PLCP_RSSI FIELD32(0x00020000) -#define RXD_W0_CIPHER_ALG FIELD32(0x00040000) -#define RXD_W0_LAST_AMSDU FIELD32(0x00080000) -#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000) - -/* - * RX WI structure - */ - -/* - * Word0 - */ -#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) -#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) -#define RXWI_W0_BSSID FIELD32(0x00001c00) -#define RXWI_W0_UDF FIELD32(0x0000e000) -#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define RXWI_W0_TID FIELD32(0xf0000000) - -/* - * Word1 - */ -#define RXWI_W1_FRAG FIELD32(0x0000000f) -#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) -#define RXWI_W1_MCS FIELD32(0x007f0000) -#define RXWI_W1_BW FIELD32(0x00800000) -#define RXWI_W1_SHORT_GI FIELD32(0x01000000) -#define RXWI_W1_STBC FIELD32(0x06000000) -#define RXWI_W1_PHYMODE FIELD32(0xc0000000) - -/* - * Word2 - */ -#define RXWI_W2_RSSI0 FIELD32(0x000000ff) -#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) -#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) - -/* - * Word3 - */ -#define RXWI_W3_SNR0 FIELD32(0x000000ff) -#define RXWI_W3_SNR1 FIELD32(0x0000ff00) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_G_TXPOWER 0 -#define MIN_A_TXPOWER -7 -#define MAX_G_TXPOWER 31 -#define MAX_A_TXPOWER 15 -#define DEFAULT_TXPOWER 5 - -#define TXPOWER_G_FROM_DEV(__txpower) \ - ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_G_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) - -#define TXPOWER_A_FROM_DEV(__txpower) \ - ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_A_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) +#define RXINFO_W0_BA FIELD32(0x00000001) +#define RXINFO_W0_DATA FIELD32(0x00000002) +#define RXINFO_W0_NULLDATA FIELD32(0x00000004) +#define RXINFO_W0_FRAG FIELD32(0x00000008) +#define RXINFO_W0_UNICAST_TO_ME FIELD32(0x00000010) +#define RXINFO_W0_MULTICAST FIELD32(0x00000020) +#define RXINFO_W0_BROADCAST FIELD32(0x00000040) +#define RXINFO_W0_MY_BSS FIELD32(0x00000080) +#define RXINFO_W0_CRC_ERROR FIELD32(0x00000100) +#define RXINFO_W0_CIPHER_ERROR FIELD32(0x00000600) +#define RXINFO_W0_AMSDU FIELD32(0x00000800) +#define RXINFO_W0_HTC FIELD32(0x00001000) +#define RXINFO_W0_RSSI FIELD32(0x00002000) +#define RXINFO_W0_L2PAD FIELD32(0x00004000) +#define RXINFO_W0_AMPDU FIELD32(0x00008000) +#define RXINFO_W0_DECRYPTED FIELD32(0x00010000) +#define RXINFO_W0_PLCP_RSSI FIELD32(0x00020000) +#define RXINFO_W0_CIPHER_ALG FIELD32(0x00040000) +#define RXINFO_W0_LAST_AMSDU FIELD32(0x00080000) +#define RXINFO_W0_PLCP_SIGNAL FIELD32(0xfff00000) #endif /* RT2800USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 27bc6b7fbfd..4d841c07c97 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -144,6 +145,11 @@ struct avg_val { int avg_weight; }; +enum rt2x00_chip_intf { + RT2X00_CHIP_INTF_PCI, + RT2X00_CHIP_INTF_USB, +}; + /* * Chipset identification * The chipset on the device is composed of a RT and RF chip. @@ -158,10 +164,20 @@ struct rt2x00_chip { #define RT2561 0x0302 #define RT2661 0x0401 #define RT2571 0x1300 +#define RT2860 0x0601 /* 2.4GHz PCI/CB */ +#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */ +#define RT2890 0x0701 /* 2.4GHz PCIe */ +#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */ +#define RT2880 0x2880 /* WSOC */ +#define RT3052 0x3052 /* WSOC */ +#define RT3090 0x3090 /* 2.4GHz PCIe */ #define RT2870 0x1600 +#define RT3070 0x1800 u16 rf; u32 rev; + + enum rt2x00_chip_intf intf; }; /* @@ -299,13 +315,6 @@ struct link { struct avg_val avg_rssi; /* - * Currently precalculated percentages of successful - * TX and RX frames. - */ - int rx_percentage; - int tx_percentage; - - /* * Work structure for scheduling periodic link tuning. */ struct delayed_work work; @@ -579,6 +588,7 @@ struct rt2x00_ops { const unsigned int eeprom_size; const unsigned int rf_size; const unsigned int tx_queues; + const unsigned int extra_tx_headroom; const struct data_queue_desc *rx; const struct data_queue_desc *tx; const struct data_queue_desc *bcn; @@ -835,9 +845,23 @@ struct rt2x00_dev { * Firmware image. */ const struct firmware *fw; + + /* + * Driver specific data. + */ + void *priv; }; /* + * Register defines. + * Some registers require multiple attempts before success, + * in those cases REGISTER_BUSY_COUNT attempts should be + * taken with a REGISTER_BUSY_DELAY interval. + */ +#define REGISTER_BUSY_COUNT 5 +#define REGISTER_BUSY_DELAY 100 + +/* * Generic RF access. * The RF is being accessed by word index. */ @@ -883,10 +907,6 @@ static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev, static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev, const u16 rt, const u16 rf, const u32 rev) { - INFO(rt2x00dev, - "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n", - rt, rf, rev); - rt2x00dev->chip.rt = rt; rt2x00dev->chip.rf = rf; rt2x00dev->chip.rev = rev; @@ -904,6 +924,13 @@ static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev, rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev); } +static inline void rt2x00_print_chip(struct rt2x00_dev *rt2x00dev) +{ + INFO(rt2x00dev, + "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n", + rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev); +} + static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip) { return (chipset->rt == chip); @@ -925,6 +952,28 @@ static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset, return ((chipset->rev & mask) == rev); } +static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev, + enum rt2x00_chip_intf intf) +{ + rt2x00dev->chip.intf = intf; +} + +static inline bool rt2x00_intf(const struct rt2x00_chip *chipset, + enum rt2x00_chip_intf intf) +{ + return (chipset->intf == intf); +} + +static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_PCI); +} + +static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_USB); +} + /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @rt2x00dev: Pointer to &struct rt2x00_dev. diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 40a201e2e15..098315a271c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index de36837dcf8..d291c7862e1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 68bc9bb1dbf..7d323a763b5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h index 035cbc98c59..fa11409cb5c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.h +++ b/drivers/net/wireless/rt2x00/rt2x00debug.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 73bbec58341..06c43ca39bf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -205,6 +205,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb); u8 rate_idx, rate_flags, retry_rates; + u8 skbdesc_flags = skbdesc->flags; unsigned int i; bool success; @@ -287,12 +288,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, } /* - * Only send the status report to mac80211 when TX status was - * requested by it. If this was a extra frame coming through - * a mac80211 library call (RTS/CTS) then we should not send the - * status report back. + * Only send the status report to mac80211 when it's a frame + * that originated in mac80211. If this was a extra frame coming + * through a mac80211 library call (RTS/CTS) then we should not + * send the status report back. */ - if (tx_info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) + if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb); else dev_kfree_skb_irq(entry->skb); @@ -430,7 +431,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, rx_status->mactime = rxdesc.timestamp; rx_status->rate_idx = rate_idx; - rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi); rx_status->signal = rxdesc.rssi; rx_status->noise = rxdesc.noise; rx_status->flag = rxdesc.flags; @@ -684,6 +684,11 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues; /* + * Initialize extra TX headroom required. + */ + rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom; + + /* * Register HW. */ status = ieee80211_register_hw(rt2x00dev->hw); diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h index fdedb512292..727019a748e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ b/drivers/net/wireless/rt2x00/rt2x00dump.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index d2deea2f267..34beb00c434 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c index e3cec839e54..1056c92143a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00ht.c +++ b/drivers/net/wireless/rt2x00/rt2x00ht.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index 49671fed91d..ca585e34d00 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h index 1046977e6a1..3b46f0c3332 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.h +++ b/drivers/net/wireless/rt2x00/rt2x00leds.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -33,8 +33,6 @@ enum led_type { LED_TYPE_QUALITY, }; -#ifdef CONFIG_RT2X00_LIB_LEDS - struct rt2x00_led { struct rt2x00_dev *rt2x00dev; struct led_classdev led_dev; @@ -45,6 +43,4 @@ struct rt2x00_led { #define LED_REGISTERED ( 1 << 1 ) }; -#endif /* CONFIG_RT2X00_LIB_LEDS */ - #endif /* RT2X00LEDS_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 567f029a8cd..be2e37fb407 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -161,8 +162,10 @@ void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length); * rt2x00queue_write_tx_frame - Write TX frame to hardware * @queue: Queue over which the frame should be send * @skb: The skb to send + * @local: frame is not from mac80211 */ -int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb); +int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, + bool local); /** * rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware @@ -223,19 +226,6 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, struct rxdone_entry_desc *rxdesc); /** - * rt2x00link_calculate_signal - Calculate signal quality - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @rssi: RX Frame RSSI - * - * Calculate the signal quality of a frame based on the rssi - * measured during the receiving of the frame and the global - * link quality statistics measured since the start of the - * link tuning. The result is a value between 0 and 100 which - * is an indication of the signal quality. - */ -int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi); - -/** * rt2x00link_start_tuner - Start periodic link tuner work * @rt2x00dev: Pointer to &struct rt2x00_dev. * diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c708d0be915..0efbf5a6c25 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -36,24 +36,6 @@ #define DEFAULT_RSSI -128 /* - * When no TX/RX percentage could be calculated due to lack of - * frames on the air, we fallback to a percentage of 50%. - * This will assure we will get at least get some decent value - * when the link tuner starts. - * The value will be dropped and overwritten with the correct (measured) - * value anyway during the first run of the link tuner. - */ -#define DEFAULT_PERCENTAGE 50 - -/* - * Small helper macro for percentage calculation - * This is a very simple macro with the only catch that it will - * produce a default value in case no total value was provided. - */ -#define PERCENTAGE(__value, __total) \ - ( (__total) ? (((__value) * 100) / (__total)) : (DEFAULT_PERCENTAGE) ) - -/* * Helper struct and macro to work with moving/walking averages. * When adding a value to the average value the following calculation * is needed: @@ -91,27 +73,6 @@ __new; \ }) -/* - * For calculating the Signal quality we have determined - * the total number of success and failed RX and TX frames. - * With the addition of the average RSSI value we can determine - * the link quality using the following algorithm: - * - * rssi_percentage = (avg_rssi * 100) / rssi_offset - * rx_percentage = (rx_success * 100) / rx_total - * tx_percentage = (tx_success * 100) / tx_total - * avg_signal = ((WEIGHT_RSSI * avg_rssi) + - * (WEIGHT_TX * tx_percentage) + - * (WEIGHT_RX * rx_percentage)) / 100 - * - * This value should then be checked to not be greater then 100. - * This means the values of WEIGHT_RSSI, WEIGHT_RX, WEIGHT_TX must - * sum up to 100 as well. - */ -#define WEIGHT_RSSI 20 -#define WEIGHT_RX 40 -#define WEIGHT_TX 40 - static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev) { struct link_ant *ant = &rt2x00dev->link.ant; @@ -304,46 +265,6 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, ant->rssi_ant = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi); } -static void rt2x00link_precalculate_signal(struct rt2x00_dev *rt2x00dev) -{ - struct link *link = &rt2x00dev->link; - struct link_qual *qual = &rt2x00dev->link.qual; - - link->rx_percentage = - PERCENTAGE(qual->rx_success, qual->rx_failed + qual->rx_success); - link->tx_percentage = - PERCENTAGE(qual->tx_success, qual->tx_failed + qual->tx_success); -} - -int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi) -{ - struct link *link = &rt2x00dev->link; - int rssi_percentage = 0; - int signal; - - /* - * We need a positive value for the RSSI. - */ - if (rssi < 0) - rssi += rt2x00dev->rssi_offset; - - /* - * Calculate the different percentages, - * which will be used for the signal. - */ - rssi_percentage = PERCENTAGE(rssi, rt2x00dev->rssi_offset); - - /* - * Add the individual percentages and use the WEIGHT - * defines to calculate the current link signal. - */ - signal = ((WEIGHT_RSSI * rssi_percentage) + - (WEIGHT_TX * link->tx_percentage) + - (WEIGHT_RX * link->rx_percentage)) / 100; - - return max_t(int, signal, 100); -} - void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) { struct link *link = &rt2x00dev->link; @@ -357,9 +278,6 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count) return; - link->rx_percentage = DEFAULT_PERCENTAGE; - link->tx_percentage = DEFAULT_PERCENTAGE; - rt2x00link_reset_tuner(rt2x00dev, false); if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) @@ -448,12 +366,6 @@ static void rt2x00link_tuner(struct work_struct *work) rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count); /* - * Precalculate a portion of the link signal which is - * in based on the tx/rx success/failure counters. - */ - rt2x00link_precalculate_signal(rt2x00dev); - - /* * Send a signal to the led to update the led signal strength. */ rt2x00leds_led_quality(rt2x00dev, qual->rssi); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 929b85f34f3..de549c244ed 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -66,7 +66,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, rts_info = IEEE80211_SKB_CB(skb); rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS; rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT; - rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; @@ -91,7 +90,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, frag_skb->data, data_length, tx_info, (struct ieee80211_rts *)(skb->data)); - retval = rt2x00queue_write_tx_frame(queue, skb); + retval = rt2x00queue_write_tx_frame(queue, skb, true); if (retval) { dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); @@ -104,10 +103,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct rt2x00_dev *rt2x00dev = hw->priv; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; enum data_queue_qid qid = skb_get_queue_mapping(skb); struct data_queue *queue; - u16 frame_control; /* * Mac80211 might be calling this function while we are trying @@ -142,7 +139,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * either RTS or CTS-to-self frame and handles everything * inside the hardware. */ - frame_control = le16_to_cpu(ieee80211hdr->frame_control); if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | IEEE80211_TX_RC_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { @@ -153,7 +149,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) goto exit_fail; } - if (rt2x00queue_write_tx_frame(queue, skb)) + if (rt2x00queue_write_tx_frame(queue, skb, false)) goto exit_fail; if (rt2x00queue_threshold(queue)) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index cdd5154bd4c..0feb4d0e466 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -310,6 +310,8 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) rt2x00dev->irq = pci_dev->irq; rt2x00dev->name = pci_name(pci_dev); + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); + /* * Determine RT chipset by reading PCI header. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 15a12487e04..d4f9449ab0a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -35,15 +35,6 @@ #define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) /* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. - */ -#define REGISTER_BUSY_COUNT 5 -#define REGISTER_BUSY_DELAY 100 - -/* * Register access. */ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, @@ -53,10 +44,9 @@ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, *value = readl(rt2x00dev->csr.base + offset); } -static inline void -rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) +static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) { memcpy_fromio(value, rt2x00dev->csr.base + offset, length); } @@ -68,10 +58,10 @@ static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, writel(value, rt2x00dev->csr.base + offset); } -static inline void -rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, const u16 length) +static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, + const u32 length) { memcpy_toio(rt2x00dev->csr.base + offset, value, length); } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 577029efe32..239afc7a9c0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -161,10 +162,10 @@ void rt2x00queue_align_frame(struct sk_buff *skb) skb_trim(skb, frame_length); } -void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_lengt) +void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length) { unsigned int frame_length = skb->len; - unsigned int align = ALIGN_SIZE(skb, header_lengt); + unsigned int align = ALIGN_SIZE(skb, header_length); if (!align) return; @@ -213,7 +214,7 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length) skb_push(skb, header_align); memmove(skb->data, skb->data + header_align, header_length); memmove(skb->data + header_length + l2pad, - skb->data + header_length + l2pad + header_align, + skb->data + header_length + l2pad + payload_align, frame_length - header_length); skbdesc->flags |= SKBDESC_L2_PADDED; } @@ -453,7 +454,8 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid); } -int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) +int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, + bool local) { struct ieee80211_tx_info *tx_info; struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); @@ -494,6 +496,9 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) skbdesc->tx_rate_idx = rate_idx; skbdesc->tx_rate_flags = rate_flags; + if (local) + skbdesc->flags |= SKBDESC_NOT_MAC80211; + /* * When hardware encryption is supported, and this frame * is to be encrypted, we should strip the IV/EIV data from diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index a5591fb2b19..70775e5ba1a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -94,12 +94,15 @@ enum data_queue_qid { * mac80211 but was stripped for processing by the driver. * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment, * the padded bytes are located between header and payload. + * @SKBDESC_NOT_MAC80211: Frame didn't originate from mac80211, + * don't try to pass it back. */ enum skb_frame_desc_flags { SKBDESC_DMA_MAPPED_RX = 1 << 0, SKBDESC_DMA_MAPPED_TX = 1 << 1, SKBDESC_IV_STRIPPED = 1 << 2, - SKBDESC_L2_PADDED = 1 << 3 + SKBDESC_L2_PADDED = 1 << 3, + SKBDESC_NOT_MAC80211 = 1 << 4, }; /** diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 983e52e127a..603bfc0adaa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c new file mode 100644 index 00000000000..19e684f8ffa --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00soc.c @@ -0,0 +1,165 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2009 Felix Fietkau <nbd@openwrt.org> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00soc + Abstract: rt2x00 generic soc device routines. + */ + +#include <linux/bug.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "rt2x00.h" +#include "rt2x00soc.h" + +static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev) +{ + kfree(rt2x00dev->rf); + rt2x00dev->rf = NULL; + + kfree(rt2x00dev->eeprom); + rt2x00dev->eeprom = NULL; +} + +static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev) +{ + struct platform_device *pdev = to_platform_device(rt2x00dev->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start); + if (!rt2x00dev->csr.base) + goto exit; + + rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); + if (!rt2x00dev->eeprom) + goto exit; + + rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); + if (!rt2x00dev->rf) + goto exit; + + return 0; + +exit: + ERROR_PROBE("Failed to allocate registers.\n"); + rt2x00soc_free_reg(rt2x00dev); + + return -ENOMEM; +} + +int rt2x00soc_probe(struct platform_device *pdev, + const unsigned short chipset, + const struct rt2x00_ops *ops) +{ + struct ieee80211_hw *hw; + struct rt2x00_dev *rt2x00dev; + int retval; + + hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); + if (!hw) { + ERROR_PROBE("Failed to allocate hardware.\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, hw); + + rt2x00dev = hw->priv; + rt2x00dev->dev = &pdev->dev; + rt2x00dev->ops = ops; + rt2x00dev->hw = hw; + rt2x00dev->irq = platform_get_irq(pdev, 0); + rt2x00dev->name = pdev->dev.driver->name; + + /* + * SoC devices mimic PCI behavior. + */ + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); + + rt2x00_set_chip_rt(rt2x00dev, chipset); + + retval = rt2x00soc_alloc_reg(rt2x00dev); + if (retval) + goto exit_free_device; + + retval = rt2x00lib_probe_dev(rt2x00dev); + if (retval) + goto exit_free_reg; + + return 0; + +exit_free_reg: + rt2x00soc_free_reg(rt2x00dev); + +exit_free_device: + ieee80211_free_hw(hw); + + return retval; +} + +int rt2x00soc_remove(struct platform_device *pdev) +{ + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Free all allocated data. + */ + rt2x00lib_remove_dev(rt2x00dev); + rt2x00soc_free_reg(rt2x00dev); + ieee80211_free_hw(hw); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00soc_remove); + +#ifdef CONFIG_PM +int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct rt2x00_dev *rt2x00dev = hw->priv; + + return rt2x00lib_suspend(rt2x00dev, state); +} +EXPORT_SYMBOL_GPL(rt2x00soc_suspend); + +int rt2x00soc_resume(struct platform_device *pdev) +{ + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct rt2x00_dev *rt2x00dev = hw->priv; + + return rt2x00lib_resume(rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00soc_resume); +#endif /* CONFIG_PM */ + +/* + * rt2x00soc module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 soc library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h new file mode 100644 index 00000000000..8a3416624af --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00soc.h @@ -0,0 +1,52 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00soc + Abstract: Data structures for the rt2x00soc module. + */ + +#ifndef RT2X00SOC_H +#define RT2X00SOC_H + +#define KSEG1ADDR(__ptr) __ptr + +#define __rt2x00soc_probe(__chipset, __ops) \ +static int __rt2x00soc_probe(struct platform_device *pdev) \ +{ \ + return rt2x00soc_probe(pdev, (__chipset), (__ops)); \ +} + +/* + * SoC driver handlers. + */ +int rt2x00soc_probe(struct platform_device *pdev, + const unsigned short chipset, + const struct rt2x00_ops *ops); +int rt2x00soc_remove(struct platform_device *pdev); +#ifdef CONFIG_PM +int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state); +int rt2x00soc_resume(struct platform_device *pdev); +#else +#define rt2x00soc_suspend NULL +#define rt2x00soc_resume NULL +#endif /* CONFIG_PM */ + +#endif /* RT2X00SOC_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index f02b48a9059..0a751e73aa0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -160,7 +160,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, const unsigned int offset, - struct rt2x00_field32 field, + const struct rt2x00_field32 field, u32 *reg) { unsigned int i; @@ -653,6 +653,8 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00dev->ops = ops; rt2x00dev->hw = hw; + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); + retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) goto exit_free_device; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index bd2d59c85f1..3da6841b5d4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -26,6 +26,8 @@ #ifndef RT2X00USB_H #define RT2X00USB_H +#include <linux/usb.h> + #define to_usb_device_intf(d) \ ({ \ struct usb_interface *intf = to_usb_interface(d); \ @@ -39,17 +41,11 @@ #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) /* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. * For USB vendor requests we need to pass a timeout * time in ms, for this we use the REGISTER_TIMEOUT, * however when loading firmware a higher value is * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE. */ -#define REGISTER_BUSY_COUNT 5 -#define REGISTER_BUSY_DELAY 100 #define REGISTER_TIMEOUT 500 #define REGISTER_TIMEOUT_FIRMWARE 1000 @@ -232,7 +228,7 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, } /** - * rt2x00usb_regbusy_read - Read 32bit register word + * rt2x00usb_register_read - Read 32bit register word * @rt2x00dev: Device pointer, see &struct rt2x00_dev. * @offset: Register offset * @value: Pointer to where register contents should be stored @@ -340,12 +336,13 @@ static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev, * through rt2x00usb_vendor_request_buff(). */ static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) + const unsigned int offset, + const void *value, + const u32 length) { rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - value, length, + (void *)value, length, REGISTER_TIMEOUT32(length)); } @@ -364,7 +361,7 @@ static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, */ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, const unsigned int offset, - struct rt2x00_field32 field, + const struct rt2x00_field32 field, u32 *reg); /* diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index b20e3eac9d6..687e17dc2e9 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -51,7 +51,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); * These indirect registers work with busy bits, * and we will try maximal REGISTER_BUSY_COUNT times to access * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, + * between each attempt. When the busy bit is still set at that time, * the access attempt is considered to have failed, * and we will print an error. */ @@ -386,7 +386,7 @@ static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -397,7 +397,7 @@ static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, /* * SEC_CSR0 contains only single-bit fields to indicate * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead we use + * defines directly will cause a lot of overhead, we use * a calculation to determine the correct bit directly. */ mask = 1 << key->hw_key_idx; @@ -425,11 +425,11 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, /* * rt2x00lib can't determine the correct free * key_idx for pairwise keys. We have 2 registers - * with key valid bits. The goal is simple, read - * the first register, if that is full move to + * with key valid bits. The goal is simple: read + * the first register. If that is full, move to * the next register. - * When both registers are full, we drop the key, - * otherwise we use the first invalid entry. + * When both registers are full, we drop the key. + * Otherwise, we use the first invalid entry. */ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); if (reg && reg == ~0) { @@ -464,8 +464,8 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, &addr_entry, sizeof(addr_entry)); /* - * Enable pairwise lookup table for given BSS idx, - * without this received frames will not be decrypted + * Enable pairwise lookup table for given BSS idx. + * Without this, received frames will not be decrypted * by the hardware. */ rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); @@ -487,7 +487,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, /* * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead we use + * defines directly will cause a lot of overhead, we use * a calculation to determine the correct bit directly. */ if (key->hw_key_idx < 32) { @@ -556,7 +556,7 @@ static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, if (flags & CONFIG_UPDATE_TYPE) { /* * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear + * For the Beacon base registers, we only need to clear * the first byte since that byte contains the VALID and OWNER * bits which (when set to 0) will invalidate the entire beacon. */ @@ -1168,8 +1168,8 @@ static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev, return FW_BAD_LENGTH; /* - * The last 2 bytes in the firmware array are the crc checksum itself, - * this means that we should never pass those 2 bytes to the crc + * The last 2 bytes in the firmware array are the crc checksum itself. + * This means that we should never pass those 2 bytes to the crc * algorithm. */ fw_crc = (data[len - 2] << 8 | data[len - 1]); @@ -1986,7 +1986,7 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, /* * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data seperately but rt2x00lib + * decryption. It has provided the data separately but rt2x00lib * should decide if it should be reinserted. */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; @@ -2042,7 +2042,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) * During each loop we will compare the freshly read * STA_CSR4 register value with the value read from * the previous loop. If the 2 values are equal then - * we should stop processing because the chance it + * we should stop processing because the chance is * quite big that the device has been unplugged and * we risk going into an endless loop. */ @@ -2300,6 +2300,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && !rt2x00_rf(&rt2x00dev->chip, RF5325) && @@ -2330,7 +2331,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); /* - * Detect if this device has an hardware controlled radio. + * Detect if this device has a hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); @@ -2355,7 +2356,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); /* - * When working with a RF2529 chip without double antenna + * When working with a RF2529 chip without double antenna, * the antenna settings should be gathered from the NIC * eeprom word. */ @@ -2545,7 +2546,6 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = 0; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -2668,7 +2668,7 @@ static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, /* * We only need to perform additional register initialization - * for WMM queues/ + * for WMM queues. */ if (queue_idx >= 4) return 0; @@ -2787,19 +2787,20 @@ static const struct data_queue_desc rt61pci_queue_bcn = { }; static const struct rt2x00_ops rt61pci_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 4, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt61pci_queue_rx, - .tx = &rt61pci_queue_tx, - .bcn = &rt61pci_queue_bcn, - .lib = &rt61pci_rt2x00_ops, - .hw = &rt61pci_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 4, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = 0, + .rx = &rt61pci_queue_rx, + .tx = &rt61pci_queue_tx, + .bcn = &rt61pci_queue_bcn, + .lib = &rt61pci_rt2x00_ops, + .hw = &rt61pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt61pci_rt2x00debug, + .debugfs = &rt61pci_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 93eb699165c..6f33f7f5668 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 14e7bb21007..ced3b6ab5e1 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -1825,6 +1825,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2571, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) || rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { @@ -2068,7 +2069,6 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -2305,19 +2305,20 @@ static const struct data_queue_desc rt73usb_queue_bcn = { }; static const struct rt2x00_ops rt73usb_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 4, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt73usb_queue_rx, - .tx = &rt73usb_queue_tx, - .bcn = &rt73usb_queue_bcn, - .lib = &rt73usb_rt2x00_ops, - .hw = &rt73usb_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 4, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXD_DESC_SIZE, + .rx = &rt73usb_queue_rx, + .tx = &rt73usb_queue_tx, + .bcn = &rt73usb_queue_bcn, + .lib = &rt73usb_rt2x00_ops, + .hw = &rt73usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt73usb_rt2x00debug, + .debugfs = &rt73usb_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 81fe0be51c4..e783a099a8f 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify |