7 files changed, 82 insertions, 26 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index cd490abced9..001735f7a66 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -163,7 +163,13 @@ static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 
 		/* Reschedule urb to read TX status again instantly */
 		return true;
-	} else if (rt2800usb_txstatus_pending(rt2x00dev)) {
+	}
+
+	/* Check if there is any entry that timedout waiting on TX status */
+	if (rt2800usb_txstatus_timeout(rt2x00dev))
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
+
+	if (rt2800usb_txstatus_pending(rt2x00dev)) {
 		/* Read register after 250 us */
 		hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000),
 			      HRTIMER_MODE_REL);
@@ -178,7 +184,7 @@ stop_reading:
 	 * here again if status reading is needed.
 	 */
 	if (rt2800usb_txstatus_pending(rt2x00dev) &&
-	    test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
+	    !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 		return true;
 	else
 		return false;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 471f87cab4a..5583214721e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -692,6 +692,8 @@ enum rt2x00_state_flags {
 	 */
 	CONFIG_CHANNEL_HT40,
 	CONFIG_POWERSAVING,
+	CONFIG_HT_DISABLED,
+	CONFIG_QOS_DISABLED,
 
 	/*
 	 * Mark we currently are sequentially reading TX_STA_FIFO register
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 293676bfa57..e7361d913e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -217,6 +217,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 	libconf.conf = conf;
 
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
+		if (!conf_is_ht(conf))
+			set_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags);
+		else
+			clear_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags);
+
 		if (conf_is_ht40(conf)) {
 			set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
 			hw_value = rt2x00ht_center_channel(rt2x00dev, conf);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index cffcf2ec990..90cc5e77265 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -430,10 +430,14 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	/*
 	 * If the data queue was below the threshold before the txdone
 	 * handler we must make sure the packet queue in the mac80211 stack
-	 * is reenabled when the txdone handler has finished.
+	 * is reenabled when the txdone handler has finished. This has to be
+	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
+	 * before it was stopped.
 	 */
+	spin_lock_bh(&entry->queue->tx_lock);
 	if (!rt2x00queue_threshold(entry->queue))
 		rt2x00queue_unpause_queue(entry->queue);
+	spin_unlock_bh(&entry->queue->tx_lock);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
@@ -1058,11 +1062,6 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
 
 	set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
 
-	/*
-	 * Register the extra components.
-	 */
-	rt2x00rfkill_register(rt2x00dev);
-
 	return 0;
 }
 
@@ -1206,6 +1205,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	rt2x00link_register(rt2x00dev);
 	rt2x00leds_register(rt2x00dev);
 	rt2x00debug_register(rt2x00dev);
+	rt2x00rfkill_register(rt2x00dev);
 
 	return 0;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index ca585e34d00..8679d781a26 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -124,17 +124,15 @@ static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev,
 
 void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
 {
-	char dev_name[16];
-	char name[32];
+	char name[36];
 	int retval;
 	unsigned long on_period;
 	unsigned long off_period;
-
-	snprintf(dev_name, sizeof(dev_name), "%s-%s",
-		 rt2x00dev->ops->name, wiphy_name(rt2x00dev->hw->wiphy));
+	const char *phy_name = wiphy_name(rt2x00dev->hw->wiphy);
 
 	if (rt2x00dev->led_radio.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s::radio", dev_name);
+		snprintf(name, sizeof(name), "%s-%s::radio",
+			 rt2x00dev->ops->name, phy_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_radio,
@@ -144,7 +142,8 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
 	}
 
 	if (rt2x00dev->led_assoc.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s::assoc", dev_name);
+		snprintf(name, sizeof(name), "%s-%s::assoc",
+			 rt2x00dev->ops->name, phy_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_assoc,
@@ -154,7 +153,8 @@ void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
 	}
 
 	if (rt2x00dev->led_qual.flags & LED_INITIALIZED) {
-		snprintf(name, sizeof(name), "%s::quality", dev_name);
+		snprintf(name, sizeof(name), "%s-%s::quality",
+			 rt2x00dev->ops->name, phy_name);
 
 		retval = rt2x00leds_register_led(rt2x00dev,
 						 &rt2x00dev->led_qual,
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index ede3c58e678..b49773ef72f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -152,13 +152,22 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (unlikely(rt2x00queue_write_tx_frame(queue, skb, false)))
 		goto exit_fail;
 
+	/*
+	 * Pausing queue has to be serialized with rt2x00lib_txdone(). Note
+	 * we should not use spin_lock_bh variant as bottom halve was already
+	 * disabled before ieee80211_xmit() call.
+	 */
+	spin_lock(&queue->tx_lock);
 	if (rt2x00queue_threshold(queue))
 		rt2x00queue_pause_queue(queue);
+	spin_unlock(&queue->tx_lock);
 
 	return;
 
  exit_fail:
+	spin_lock(&queue->tx_lock);
 	rt2x00queue_pause_queue(queue);
+	spin_unlock(&queue->tx_lock);
  exit_free_skb:
 	ieee80211_free_txskb(hw, skb);
 }
@@ -700,9 +709,19 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 			rt2x00dev->intf_associated--;
 
 		rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
+
+		clear_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
 	}
 
 	/*
+	 * Check for access point which do not support 802.11e . We have to
+	 * generate data frames sequence number in S/W for such AP, because
+	 * of H/W bug.
+	 */
+	if (changes & BSS_CHANGED_QOS && !bss_conf->qos)
+		set_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
+
+	/*
 	 * When the erp information has changed, we should perform
 	 * additional configuration steps. For all other changes we are done.
 	 */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 5adfb3eab9c..8ecf409476c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -213,8 +213,19 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
 
 	__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
 
-	if (!test_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags))
-		return;
+	if (!test_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags)) {
+		/*
+		 * rt2800 has a H/W (or F/W) bug, device incorrectly increase
+		 * seqno on retransmited data (non-QOS) frames. To workaround
+		 * the problem let's generate seqno in software if QOS is
+		 * disabled.
+		 */
+		if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags))
+			__clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+		else
+			/* H/W will generate sequence number */
+			return;
+	}
 
 	/*
 	 * The hardware is not able to insert a sequence number. Assign a
@@ -320,14 +331,6 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
 		txdesc->u.ht.wcid = sta_priv->wcid;
 	}
 
-	txdesc->u.ht.ba_size = 7;	/* FIXME: What value is needed? */
-
-	/*
-	 * Only one STBC stream is supported for now.
-	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_STBC)
-		txdesc->u.ht.stbc = 1;
-
 	/*
 	 * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the
 	 * mcs rate to be used
@@ -351,6 +354,24 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
 			txdesc->u.ht.mcs |= 0x08;
 	}
 
+	if (test_bit(CONFIG_HT_DISABLED, &rt2x00dev->flags)) {
+		if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
+			txdesc->u.ht.txop = TXOP_SIFS;
+		else
+			txdesc->u.ht.txop = TXOP_BACKOFF;
+
+		/* Left zero on all other settings. */
+		return;
+	}
+
+	txdesc->u.ht.ba_size = 7;	/* FIXME: What value is needed? */
+
+	/*
+	 * Only one STBC stream is supported for now.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_STBC)
+		txdesc->u.ht.stbc = 1;
+
 	/*
 	 * This frame is eligible for an AMPDU, however, don't aggregate
 	 * frames that are intended to probe a specific tx rate.
@@ -619,6 +640,9 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	else if (test_bit(REQUIRE_DMA, &queue->rt2x00dev->cap_flags))
 		rt2x00queue_align_frame(skb);
 
+	/*
+	 * That function must be called with bh disabled.
+	 */
 	spin_lock(&queue->tx_lock);
 
 	if (unlikely(rt2x00queue_full(queue))) {