diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192se/hw.c')
-rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 26 |
1 files changed, 10 insertions, 16 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 2e9005d0454..b1d0213dc60 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -516,7 +516,7 @@ static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw) mdelay(10); /* check GPIO3 */ - u1tmp = rtl_read_byte(rtlpriv, GPIO_IN); + u1tmp = rtl_read_byte(rtlpriv, GPIO_IN_SE); retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF; return retval; @@ -884,12 +884,10 @@ static void _rtl92se_hw_configure(struct ieee80211_hw *hw) struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); u8 reg_bw_opmode = 0; - u32 reg_ratr = 0, reg_rrsr = 0; + u32 reg_rrsr = 0; u8 regtmp = 0; reg_bw_opmode = BW_OPMODE_20MHZ; - reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | - RATE_ALL_OFDM_2SS; reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL); @@ -996,7 +994,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT; rtlpriv->psc.rfpwr_state = ERFON; - rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason, true); + /* FIXME: check spinlocks if this block is uncommented */ + rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason); } else { /* gpio radio on/off is out of adapter start */ if (rtlpriv->psc.hwradiooff == false) { @@ -1107,7 +1106,7 @@ void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) if (rtlpriv->psc.rfpwr_state != ERFON) return; - if (check_bssid == true) { + if (check_bssid) { reg_rcr |= (RCR_CBSSID); rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); } else if (check_bssid == false) { @@ -1122,14 +1121,12 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw, { struct rtl_priv *rtlpriv = rtl_priv(hw); u8 bt_msr = rtl_read_byte(rtlpriv, MSR); - enum led_ctl_mode ledaction = LED_CTL_NO_LINK; u32 temp; bt_msr &= ~MSR_LINK_MASK; switch (type) { case NL80211_IFTYPE_UNSPECIFIED: bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT); - ledaction = LED_CTL_LINK; RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("Set Network type to NO LINK!\n")); break; @@ -1140,7 +1137,6 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw, break; case NL80211_IFTYPE_STATION: bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT); - ledaction = LED_CTL_LINK; RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("Set Network type to STA!\n")); break; @@ -1218,8 +1214,6 @@ void rtl92se_enable_interrupt(struct ieee80211_hw *hw) rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]); /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */ rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F); - - rtlpci->irq_enabled = true; } void rtl92se_disable_interrupt(struct ieee80211_hw *hw) @@ -1230,7 +1224,7 @@ void rtl92se_disable_interrupt(struct ieee80211_hw *hw) rtl_write_dword(rtlpriv, INTA_MASK, 0); rtl_write_dword(rtlpriv, INTA_MASK + 4, 0); - rtlpci->irq_enabled = false; + synchronize_irq(rtlpci->pdev->irq); } @@ -1655,7 +1649,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) rtlefuse->autoload_failflag = false; } - if (rtlefuse->autoload_failflag == true) + if (rtlefuse->autoload_failflag) return; _rtl8192se_get_IC_Inferiority(hw); @@ -2271,7 +2265,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); - enum rf_pwrstate rfpwr_toset, cur_rfstate; + enum rf_pwrstate rfpwr_toset /*, cur_rfstate */; unsigned long flag = 0; bool actuallyset = false; bool turnonbypowerdomain = false; @@ -2292,7 +2286,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); } - cur_rfstate = ppsc->rfpwr_state; + /* cur_rfstate = ppsc->rfpwr_state;*/ /* because after _rtl92s_phy_set_rfhalt, all power * closed, so we must open some power for GPIO check, @@ -2305,7 +2299,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) rfpwr_toset = _rtl92se_rf_onoff_detect(hw); - if ((ppsc->hwradiooff == true) && (rfpwr_toset == ERFON)) { + if ((ppsc->hwradiooff) && (rfpwr_toset == ERFON)) { RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, ("RFKILL-HW Radio ON, RF ON\n")); |