1 files changed, 31 insertions, 17 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 4f461786a7e..9098558d916 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -251,7 +251,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			u8 e_aci = *val;
 			rtl92s_dm_init_edca_turbo(hw);
 
-			if (rtlpci->acm_method != eAcmWay2_SW)
+			if (rtlpci->acm_method != EACMWAY2_SW)
 				rtlpriv->cfg->ops->set_hw_reg(hw,
 						 HW_VAR_ACM_CTRL,
 						 &e_aci);
@@ -413,20 +413,18 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					(u8 *)(&fw_current_inps));
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 					HW_VAR_H2C_FW_PWRMODE,
-					(u8 *)(&ppsc->fwctrl_psmode));
+					&ppsc->fwctrl_psmode);
 
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-					HW_VAR_SET_RPWM,
-					(u8 *)(&rpwm_val));
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+						      &rpwm_val);
 		} else {
 			rpwm_val = 0x0C;	/* RF on */
 			fw_pwrmode = FW_PS_ACTIVE_MODE;
 			fw_current_inps = false;
 			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
-					(u8 *)(&rpwm_val));
-			rtlpriv->cfg->ops->set_hw_reg(hw,
-					HW_VAR_H2C_FW_PWRMODE,
-					(u8 *)(&fw_pwrmode));
+						      &rpwm_val);
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+						      &fw_pwrmode);
 
 			rtlpriv->cfg->ops->set_hw_reg(hw,
 					HW_VAR_FW_PSMODE_STATUS,
@@ -955,7 +953,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	u8 tmp_byte = 0;
-
+	unsigned long flags;
 	bool rtstatus = true;
 	u8 tmp_u1b;
 	int err = false;
@@ -967,6 +965,16 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	rtlpci->being_init_adapter = true;
 
+	/* As this function can take a very long time (up to 350 ms)
+	 * and can be called with irqs disabled, reenable the irqs
+	 * to let the other devices continue being serviced.
+	 *
+	 * It is safe doing so since our own interrupts will only be enabled
+	 * in a subsequent step.
+	 */
+	local_save_flags(flags);
+	local_irq_enable();
+
 	rtlpriv->intf_ops->disable_aspm(hw);
 
 	/* 1. MAC Initialize */
@@ -984,7 +992,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 			 "Failed to download FW. Init HW without FW now... "
 			 "Please copy FW into /lib/firmware/rtlwifi\n");
-		return 1;
+		err = 1;
+		goto exit;
 	}
 
 	/* After FW download, we have to reset MAC register */
@@ -997,7 +1006,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
 	if (!rtl92s_phy_mac_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
-		return rtstatus;
+		err = rtstatus;
+		goto exit;
 	}
 
 	/* because last function modify RCR, so we update
@@ -1016,7 +1026,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
 	if (!rtl92s_phy_bb_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
-		return rtstatus;
+		err = rtstatus;
+		goto exit;
 	}
 
 	/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
@@ -1033,7 +1044,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	if (!rtl92s_phy_rf_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
-		return rtstatus;
+		err = rtstatus;
+		goto exit;
 	}
 
 	/* After read predefined TXT, we must set BB/MAC/RF
@@ -1122,8 +1134,9 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
 	rtl92s_dm_init(hw);
+exit:
+	local_irq_restore(flags);
 	rtlpci->being_init_adapter = false;
-
 	return err;
 }
 
@@ -1135,12 +1148,13 @@ void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr)
 void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	u32 reg_rcr = rtlpci->receive_config;
+	u32 reg_rcr;
 
 	if (rtlpriv->psc.rfpwr_state != ERFON)
 		return;
 
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+
 	if (check_bssid) {
 		reg_rcr |= (RCR_CBSSID);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));