summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rtlwifi/rtl8192se
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192se')
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192se/fw.c6
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192se/hw.c10
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192se/phy.c13
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192se/rf.c2
4 files changed, 15 insertions, 16 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
index 0d8bf565700..380e7d4b1cc 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
@@ -272,7 +272,7 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
/* Turn On CPU */
rtstatus = _rtl92s_firmware_enable_cpu(hw);
- if (rtstatus != true) {
+ if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Enable CPU fail!\n");
goto status_check_fail;
@@ -445,14 +445,14 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
rtstatus = _rtl92s_firmware_downloadcode(hw, puc_mappedfile,
ul_filelength);
- if (rtstatus != true) {
+ if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
goto fail;
}
/* <3> Check whether load FW process is ready */
rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
- if (rtstatus != true) {
+ if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
goto fail;
}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 22098c2f38f..b141c35bf92 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -962,7 +962,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
- if (rtl92s_phy_mac_config(hw) != true) {
+ if (!rtl92s_phy_mac_config(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
return rtstatus;
}
@@ -972,7 +972,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, CMDR, 0x37FC);
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
- if (rtl92s_phy_bb_config(hw) != true) {
+ if (!rtl92s_phy_bb_config(hw)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
return rtstatus;
}
@@ -1008,7 +1008,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
else
rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
- if (rtl92s_phy_rf_config(hw) != true) {
+ if (!rtl92s_phy_rf_config(hw)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
return rtstatus;
}
@@ -1105,7 +1105,7 @@ void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
if (check_bssid) {
reg_rcr |= (RCR_CBSSID);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
- } else if (check_bssid == false) {
+ } else if (!check_bssid) {
reg_rcr &= (~RCR_CBSSID);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
}
@@ -2306,7 +2306,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
rfpwr_toset = ERFON;
ppsc->hwradiooff = false;
actuallyset = true;
- } else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) {
+ } else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) {
RT_TRACE(rtlpriv, COMP_RF,
DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n");
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index 05b4e2790e9..3bfc411f13b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -558,8 +558,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
"IPS Set eRf nic enable\n");
rtstatus = rtl_ps_enable_nic(hw);
- } while ((rtstatus != true) &&
- (InitializeCount < 10));
+ } while (!rtstatus && (InitializeCount < 10));
RT_CLEAR_PS_LEVEL(ppsc,
RT_RF_OFF_LEVL_HALT_NIC);
@@ -990,7 +989,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
rtstatus = false;
}
- if (rtstatus != true) {
+ if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
"Write BB Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
@@ -1004,7 +1003,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl92s_phy_config_bb_with_pg(hw,
BASEBAND_CONFIG_PHY_REG);
}
- if (rtstatus != true) {
+ if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
"_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
goto phy_BB8190_Config_ParaFile_Fail;
@@ -1013,7 +1012,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
/* 3. BB AGC table Initialization */
rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
- if (rtstatus != true) {
+ if (!rtstatus) {
pr_err("%s(): AGC Table Fail\n", __func__);
goto phy_BB8190_Config_ParaFile_Fail;
}
@@ -1270,7 +1269,7 @@ void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel)
/* [0]:RF-A, [1]:RF-B */
u8 cckpowerlevel[2], ofdmpowerLevel[2];
- if (rtlefuse->txpwr_fromeprom == false)
+ if (!rtlefuse->txpwr_fromeprom)
return;
/* Mainly we use RF-A Tx Power to write the Tx Power registers,
@@ -1621,7 +1620,7 @@ bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
break;
case FW_CMD_HIGH_PWR_ENABLE:
if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
- (rtlpriv->dm.dynamic_txpower_enable != true)) {
+ !rtlpriv->dm.dynamic_txpower_enable) {
fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
FW_SS_CTL);
FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
index ad51906124d..08c2f562512 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -499,7 +499,7 @@ bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
break;
}
- if (rtstatus != true) {
+ if (!rtstatus) {
pr_err("Radio[%d] Fail!!\n", rfpath);
goto fail;
}