diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192se')
21 files changed, 11097 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/Makefile b/drivers/net/wireless/rtlwifi/rtl8192se/Makefile new file mode 100644 index 00000000000..b7eb13819cb --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/Makefile @@ -0,0 +1,15 @@ +rtl8192se-objs := \ + dm.o \ + fw.o \ + hw.o \ + led.o \ + phy.o \ + rf.o \ + sw.o \ + table.o \ + trx.o + +obj-$(CONFIG_RTL8192SE) += rtl8192se.o + +ccflags-y += -D__CHECK_ENDIAN__ + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/def.h b/drivers/net/wireless/rtlwifi/rtl8192se/def.h new file mode 100644 index 00000000000..69828f2b3fa --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/def.h @@ -0,0 +1,598 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __REALTEK_92S_DEF_H__ +#define __REALTEK_92S_DEF_H__ + +#define RX_MPDU_QUEUE 0 +#define RX_CMD_QUEUE 1 +#define RX_MAX_QUEUE 2 + +#define DESC92S_RATE1M 0x00 +#define DESC92S_RATE2M 0x01 +#define DESC92S_RATE5_5M 0x02 +#define DESC92S_RATE11M 0x03 +#define DESC92S_RATE6M 0x04 +#define DESC92S_RATE9M 0x05 +#define DESC92S_RATE12M 0x06 +#define DESC92S_RATE18M 0x07 +#define DESC92S_RATE24M 0x08 +#define DESC92S_RATE36M 0x09 +#define DESC92S_RATE48M 0x0a +#define DESC92S_RATE54M 0x0b +#define DESC92S_RATEMCS0 0x0c +#define DESC92S_RATEMCS1 0x0d +#define DESC92S_RATEMCS2 0x0e +#define DESC92S_RATEMCS3 0x0f +#define DESC92S_RATEMCS4 0x10 +#define DESC92S_RATEMCS5 0x11 +#define DESC92S_RATEMCS6 0x12 +#define DESC92S_RATEMCS7 0x13 +#define DESC92S_RATEMCS8 0x14 +#define DESC92S_RATEMCS9 0x15 +#define DESC92S_RATEMCS10 0x16 +#define DESC92S_RATEMCS11 0x17 +#define DESC92S_RATEMCS12 0x18 +#define DESC92S_RATEMCS13 0x19 +#define DESC92S_RATEMCS14 0x1a +#define DESC92S_RATEMCS15 0x1b +#define DESC92S_RATEMCS15_SG 0x1c +#define DESC92S_RATEMCS32 0x20 + +#define SHORT_SLOT_TIME 9 +#define NON_SHORT_SLOT_TIME 20 + +/* Rx smooth factor */ +#define RX_SMOOTH_FACTOR 20 + +/* Queue Select Value in TxDesc */ +#define QSLT_BK 0x2 +#define QSLT_BE 0x0 +#define QSLT_VI 0x5 +#define QSLT_VO 0x6 +#define QSLT_BEACON 0x10 +#define QSLT_HIGH 0x11 +#define QSLT_MGNT 0x12 +#define QSLT_CMD 0x13 + +#define PHY_RSSI_SLID_WIN_MAX 100 +#define PHY_LINKQUALITY_SLID_WIN_MAX 20 +#define PHY_BEACON_RSSI_SLID_WIN_MAX 10 + +/* Tx Desc */ +#define TX_DESC_SIZE_RTL8192S (16 * 4) +#define TX_CMDDESC_SIZE_RTL8192S (16 * 4) + +/* Define a macro that takes a le32 word, converts it to host ordering, + * right shifts by a specified count, creates a mask of the specified + * bit count, and extracts that number of bits. + */ + +#define SHIFT_AND_MASK_LE(__pdesc, __shift, __mask) \ + ((le32_to_cpu(*(((__le32 *)(__pdesc)))) >> (__shift)) & \ + BIT_LEN_MASK_32(__mask)) + +/* Define a macro that clears a bit field in an le32 word and + * sets the specified value into that bit field. The resulting + * value remains in le32 ordering; however, it is properly converted + * to host ordering for the clear and set operations before conversion + * back to le32. + */ + +#define SET_BITS_OFFSET_LE(__pdesc, __shift, __len, __val) \ + (*(__le32 *)(__pdesc) = \ + (cpu_to_le32((le32_to_cpu(*((__le32 *)(__pdesc))) & \ + (~(BIT_OFFSET_LEN_MASK_32((__shift), __len)))) | \ + (((u32)(__val) & BIT_LEN_MASK_32(__len)) << (__shift))))); + +/* macros to read/write various fields in RX or TX descriptors */ + +/* Dword 0 */ +#define SET_TX_DESC_PKT_SIZE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 0, 16, __val) +#define SET_TX_DESC_OFFSET(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 16, 8, __val) +#define SET_TX_DESC_TYPE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 24, 2, __val) +#define SET_TX_DESC_LAST_SEG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 26, 1, __val) +#define SET_TX_DESC_FIRST_SEG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 27, 1, __val) +#define SET_TX_DESC_LINIP(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 28, 1, __val) +#define SET_TX_DESC_AMSDU(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 29, 1, __val) +#define SET_TX_DESC_GREEN_FIELD(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 30, 1, __val) +#define SET_TX_DESC_OWN(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 31, 1, __val) + +#define GET_TX_DESC_OWN(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 31, 1) + +/* Dword 1 */ +#define SET_TX_DESC_MACID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 0, 5, __val) +#define SET_TX_DESC_MORE_DATA(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 5, 1, __val) +#define SET_TX_DESC_MORE_FRAG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 6, 1, __val) +#define SET_TX_DESC_PIFS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 7, 1, __val) +#define SET_TX_DESC_QUEUE_SEL(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 8, 5, __val) +#define SET_TX_DESC_ACK_POLICY(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 13, 2, __val) +#define SET_TX_DESC_NO_ACM(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 15, 1, __val) +#define SET_TX_DESC_NON_QOS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 16, 1, __val) +#define SET_TX_DESC_KEY_ID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 17, 2, __val) +#define SET_TX_DESC_OUI(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 19, 1, __val) +#define SET_TX_DESC_PKT_TYPE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 20, 1, __val) +#define SET_TX_DESC_EN_DESC_ID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 21, 1, __val) +#define SET_TX_DESC_SEC_TYPE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 22, 2, __val) +#define SET_TX_DESC_WDS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 24, 1, __val) +#define SET_TX_DESC_HTC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 25, 1, __val) +#define SET_TX_DESC_PKT_OFFSET(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 26, 5, __val) +#define SET_TX_DESC_HWPC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 27, 1, __val) + +/* Dword 2 */ +#define SET_TX_DESC_DATA_RETRY_LIMIT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 0, 6, __val) +#define SET_TX_DESC_RETRY_LIMIT_ENABLE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 6, 1, __val) +#define SET_TX_DESC_TSFL(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 7, 5, __val) +#define SET_TX_DESC_RTS_RETRY_COUNT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 12, 6, __val) +#define SET_TX_DESC_DATA_RETRY_COUNT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 18, 6, __val) +#define SET_TX_DESC_RSVD_MACID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(((__pdesc) + 8), 24, 5, __val) +#define SET_TX_DESC_AGG_ENABLE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 29, 1, __val) +#define SET_TX_DESC_AGG_BREAK(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 30, 1, __val) +#define SET_TX_DESC_OWN_MAC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 31, 1, __val) + +/* Dword 3 */ +#define SET_TX_DESC_NEXT_HEAP_PAGE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 0, 8, __val) +#define SET_TX_DESC_TAIL_PAGE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 8, 8, __val) +#define SET_TX_DESC_SEQ(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 16, 12, __val) +#define SET_TX_DESC_FRAG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 28, 4, __val) + +/* Dword 4 */ +#define SET_TX_DESC_RTS_RATE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 0, 6, __val) +#define SET_TX_DESC_DISABLE_RTS_FB(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 6, 1, __val) +#define SET_TX_DESC_RTS_RATE_FB_LIMIT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 7, 4, __val) +#define SET_TX_DESC_CTS_ENABLE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 11, 1, __val) +#define SET_TX_DESC_RTS_ENABLE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 12, 1, __val) +#define SET_TX_DESC_RA_BRSR_ID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 13, 3, __val) +#define SET_TX_DESC_TXHT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 16, 1, __val) +#define SET_TX_DESC_TX_SHORT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 17, 1, __val) +#define SET_TX_DESC_TX_BANDWIDTH(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 18, 1, __val) +#define SET_TX_DESC_TX_SUB_CARRIER(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 19, 2, __val) +#define SET_TX_DESC_TX_STBC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 21, 2, __val) +#define SET_TX_DESC_TX_REVERSE_DIRECTION(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 23, 1, __val) +#define SET_TX_DESC_RTS_HT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 24, 1, __val) +#define SET_TX_DESC_RTS_SHORT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 25, 1, __val) +#define SET_TX_DESC_RTS_BANDWIDTH(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 26, 1, __val) +#define SET_TX_DESC_RTS_SUB_CARRIER(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 27, 2, __val) +#define SET_TX_DESC_RTS_STBC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 29, 2, __val) +#define SET_TX_DESC_USER_RATE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 31, 1, __val) + +/* Dword 5 */ +#define SET_TX_DESC_PACKET_ID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 20, 0, 9, __val) +#define SET_TX_DESC_TX_RATE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 20, 9, 6, __val) +#define SET_TX_DESC_DISABLE_FB(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 20, 15, 1, __val) +#define SET_TX_DESC_DATA_RATE_FB_LIMIT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 20, 16, 5, __val) +#define SET_TX_DESC_TX_AGC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 20, 21, 11, __val) + +/* Dword 6 */ +#define SET_TX_DESC_IP_CHECK_SUM(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 24, 0, 16, __val) +#define SET_TX_DESC_TCP_CHECK_SUM(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 24, 16, 16, __val) + +/* Dword 7 */ +#define SET_TX_DESC_TX_BUFFER_SIZE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 28, 0, 16, __val) +#define SET_TX_DESC_IP_HEADER_OFFSET(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 28, 16, 8, __val) +#define SET_TX_DESC_TCP_ENABLE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 28, 31, 1, __val) + +/* Dword 8 */ +#define SET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 32, 0, 32, __val) +#define GET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 32, 0, 32) + +/* Dword 9 */ +#define SET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 36, 0, 32, __val) + +/* Because the PCI Tx descriptors are chaied at the + * initialization and all the NextDescAddresses in + * these descriptors cannot not be cleared (,or + * driver/HW cannot find the next descriptor), the + * offset 36 (NextDescAddresses) is reserved when + * the desc is cleared. */ +#define TX_DESC_NEXT_DESC_OFFSET 36 +#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \ +do { \ + if (_size > TX_DESC_NEXT_DESC_OFFSET) \ + memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \ + else \ + memset(__pdesc, 0, _size); \ +} while (0); + +/* Rx Desc */ +#define RX_STATUS_DESC_SIZE 24 +#define RX_DRV_INFO_SIZE_UNIT 8 + +/* DWORD 0 */ +#define SET_RX_STATUS_DESC_PKT_LEN(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 0, 14, __val) +#define SET_RX_STATUS_DESC_CRC32(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 14, 1, __val) +#define SET_RX_STATUS_DESC_ICV(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 15, 1, __val) +#define SET_RX_STATUS_DESC_DRVINFO_SIZE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 16, 4, __val) +#define SET_RX_STATUS_DESC_SECURITY(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 20, 3, __val) +#define SET_RX_STATUS_DESC_QOS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 23, 1, __val) +#define SET_RX_STATUS_DESC_SHIFT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 24, 2, __val) +#define SET_RX_STATUS_DESC_PHY_STATUS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 26, 1, __val) +#define SET_RX_STATUS_DESC_SWDEC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 27, 1, __val) +#define SET_RX_STATUS_DESC_LAST_SEG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 28, 1, __val) +#define SET_RX_STATUS_DESC_FIRST_SEG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 29, 1, __val) +#define SET_RX_STATUS_DESC_EOR(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 30, 1, __val) +#define SET_RX_STATUS_DESC_OWN(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc, 31, 1, __val) + +#define GET_RX_STATUS_DESC_PKT_LEN(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 0, 14) +#define GET_RX_STATUS_DESC_CRC32(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 14, 1) +#define GET_RX_STATUS_DESC_ICV(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 15, 1) +#define GET_RX_STATUS_DESC_DRVINFO_SIZE(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 16, 4) +#define GET_RX_STATUS_DESC_SECURITY(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 20, 3) +#define GET_RX_STATUS_DESC_QOS(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 23, 1) +#define GET_RX_STATUS_DESC_SHIFT(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 24, 2) +#define GET_RX_STATUS_DESC_PHY_STATUS(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 26, 1) +#define GET_RX_STATUS_DESC_SWDEC(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 27, 1) +#define GET_RX_STATUS_DESC_LAST_SEG(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 28, 1) +#define GET_RX_STATUS_DESC_FIRST_SEG(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 29, 1) +#define GET_RX_STATUS_DESC_EOR(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 30, 1) +#define GET_RX_STATUS_DESC_OWN(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc, 31, 1) + +/* DWORD 1 */ +#define SET_RX_STATUS_DESC_MACID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 0, 5, __val) +#define SET_RX_STATUS_DESC_TID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 5, 4, __val) +#define SET_RX_STATUS_DESC_PAGGR(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 14, 1, __val) +#define SET_RX_STATUS_DESC_FAGGR(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 15, 1, __val) +#define SET_RX_STATUS_DESC_A1_FIT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 16, 4, __val) +#define SET_RX_STATUS_DESC_A2_FIT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 20, 4, __val) +#define SET_RX_STATUS_DESC_PAM(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 24, 1, __val) +#define SET_RX_STATUS_DESC_PWR(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 25, 1, __val) +#define SET_RX_STATUS_DESC_MOREDATA(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 26, 1, __val) +#define SET_RX_STATUS_DESC_MOREFRAG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 27, 1, __val) +#define SET_RX_STATUS_DESC_TYPE(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 28, 2, __val) +#define SET_RX_STATUS_DESC_MC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 30, 1, __val) +#define SET_RX_STATUS_DESC_BC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 4, 31, 1, __val) + +#define GET_RX_STATUS_DEC_MACID(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 0, 5) +#define GET_RX_STATUS_DESC_TID(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 5, 4) +#define GET_RX_STATUS_DESC_PAGGR(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 14, 1) +#define GET_RX_STATUS_DESC_FAGGR(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 15, 1) +#define GET_RX_STATUS_DESC_A1_FIT(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 16, 4) +#define GET_RX_STATUS_DESC_A2_FIT(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 20, 4) +#define GET_RX_STATUS_DESC_PAM(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 24, 1) +#define GET_RX_STATUS_DESC_PWR(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 25, 1) +#define GET_RX_STATUS_DESC_MORE_DATA(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 26, 1) +#define GET_RX_STATUS_DESC_MORE_FRAG(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 27, 1) +#define GET_RX_STATUS_DESC_TYPE(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 28, 2) +#define GET_RX_STATUS_DESC_MC(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 30, 1) +#define GET_RX_STATUS_DESC_BC(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 4, 31, 1) + +/* DWORD 2 */ +#define SET_RX_STATUS_DESC_SEQ(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 0, 12, __val) +#define SET_RX_STATUS_DESC_FRAG(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 12, 4, __val) +#define SET_RX_STATUS_DESC_NEXT_PKTLEN(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 16, 8, __val) +#define SET_RX_STATUS_DESC_NEXT_IND(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 8, 30, 1, __val) + +#define GET_RX_STATUS_DESC_SEQ(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 8, 0, 12) +#define GET_RX_STATUS_DESC_FRAG(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 8, 12, 4) +#define GET_RX_STATUS_DESC_NEXT_PKTLEN(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 8, 16, 8) +#define GET_RX_STATUS_DESC_NEXT_IND(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 8, 30, 1) + +/* DWORD 3 */ +#define SET_RX_STATUS_DESC_RX_MCS(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 0, 6, __val) +#define SET_RX_STATUS_DESC_RX_HT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 6, 1, __val) +#define SET_RX_STATUS_DESC_AMSDU(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 7, 1, __val) +#define SET_RX_STATUS_DESC_SPLCP(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 8, 1, __val) +#define SET_RX_STATUS_DESC_BW(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 9, 1, __val) +#define SET_RX_STATUS_DESC_HTC(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 10, 1, __val) +#define SET_RX_STATUS_DESC_TCP_CHK_RPT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 11, 1, __val) +#define SET_RX_STATUS_DESC_IP_CHK_RPT(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 12, 1, __val) +#define SET_RX_STATUS_DESC_TCP_CHK_VALID(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 13, 1, __val) +#define SET_RX_STATUS_DESC_HWPC_ERR(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 14, 1, __val) +#define SET_RX_STATUS_DESC_HWPC_IND(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 15, 1, __val) +#define SET_RX_STATUS_DESC_IV0(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 12, 16, 16, __val) + +#define GET_RX_STATUS_DESC_RX_MCS(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 0, 6) +#define GET_RX_STATUS_DESC_RX_HT(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 6, 1) +#define GET_RX_STATUS_DESC_AMSDU(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 7, 1) +#define GET_RX_STATUS_DESC_SPLCP(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 8, 1) +#define GET_RX_STATUS_DESC_BW(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 9, 1) +#define GET_RX_STATUS_DESC_HTC(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 10, 1) +#define GET_RX_STATUS_DESC_TCP_CHK_RPT(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 11, 1) +#define GET_RX_STATUS_DESC_IP_CHK_RPT(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 12, 1) +#define GET_RX_STATUS_DESC_TCP_CHK_VALID(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 13, 1) +#define GET_RX_STATUS_DESC_HWPC_ERR(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 14, 1) +#define GET_RX_STATUS_DESC_HWPC_IND(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 15, 1) +#define GET_RX_STATUS_DESC_IV0(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 12, 16, 16) + +/* DWORD 4 */ +#define SET_RX_STATUS_DESC_IV1(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 16, 0, 32, __val) +#define GET_RX_STATUS_DESC_IV1(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 16, 0, 32) + +/* DWORD 5 */ +#define SET_RX_STATUS_DESC_TSFL(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 20, 0, 32, __val) +#define GET_RX_STATUS_DESC_TSFL(__pdesc) \ + SHIFT_AND_MASK_LE(__pdesc + 20, 0, 32) + +/* DWORD 6 */ +#define SET_RX_STATUS__DESC_BUFF_ADDR(__pdesc, __val) \ + SET_BITS_OFFSET_LE(__pdesc + 24, 0, 32, __val) + +#define RX_HAL_IS_CCK_RATE(_pdesc)\ + (GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE1M || \ + GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE2M || \ + GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE5_5M ||\ + GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92S_RATE11M) + +enum rf_optype { + RF_OP_BY_SW_3WIRE = 0, + RF_OP_BY_FW, + RF_OP_MAX +}; + +enum ic_inferiority { + IC_INFERIORITY_A = 0, + IC_INFERIORITY_B = 1, +}; + +enum fwcmd_iotype { + /* For DIG DM */ + FW_CMD_DIG_ENABLE = 0, + FW_CMD_DIG_DISABLE = 1, + FW_CMD_DIG_HALT = 2, + FW_CMD_DIG_RESUME = 3, + /* For High Power DM */ + FW_CMD_HIGH_PWR_ENABLE = 4, + FW_CMD_HIGH_PWR_DISABLE = 5, + /* For Rate adaptive DM */ + FW_CMD_RA_RESET = 6, + FW_CMD_RA_ACTIVE = 7, + FW_CMD_RA_REFRESH_N = 8, + FW_CMD_RA_REFRESH_BG = 9, + FW_CMD_RA_INIT = 10, + /* For FW supported IQK */ + FW_CMD_IQK_INIT = 11, + /* Tx power tracking switch, + * MP driver only */ + FW_CMD_TXPWR_TRACK_ENABLE = 12, + /* Tx power tracking switch, + * MP driver only */ + FW_CMD_TXPWR_TRACK_DISABLE = 13, + /* Tx power tracking with thermal + * indication, for Normal driver */ + FW_CMD_TXPWR_TRACK_THERMAL = 14, + FW_CMD_PAUSE_DM_BY_SCAN = 15, + FW_CMD_RESUME_DM_BY_SCAN = 16, + FW_CMD_RA_REFRESH_N_COMB = 17, + FW_CMD_RA_REFRESH_BG_COMB = 18, + FW_CMD_ANTENNA_SW_ENABLE = 19, + FW_CMD_ANTENNA_SW_DISABLE = 20, + /* Tx Status report for CCX from FW */ + FW_CMD_TX_FEEDBACK_CCX_ENABLE = 21, + /* Indifate firmware that driver + * enters LPS, For PS-Poll issue */ + FW_CMD_LPS_ENTER = 22, + /* Indicate firmware that driver + * leave LPS*/ + FW_CMD_LPS_LEAVE = 23, + /* Set DIG mode to signal strength */ + FW_CMD_DIG_MODE_SS = 24, + /* Set DIG mode to false alarm. */ + FW_CMD_DIG_MODE_FA = 25, + FW_CMD_ADD_A2_ENTRY = 26, + FW_CMD_CTRL_DM_BY_DRIVER = 27, + FW_CMD_CTRL_DM_BY_DRIVER_NEW = 28, + FW_CMD_PAPE_CONTROL = 29, + FW_CMD_IQK_ENABLE = 30, +}; + +/* + * Driver info contain PHY status + * and other variabel size info + * PHY Status content as below + */ +struct rx_fwinfo { + /* DWORD 0 */ + u8 gain_trsw[4]; + /* DWORD 1 */ + u8 pwdb_all; + u8 cfosho[4]; + /* DWORD 2 */ + u8 cfotail[4]; + /* DWORD 3 */ + s8 rxevm[2]; + s8 rxsnr[4]; + /* DWORD 4 */ + u8 pdsnr[2]; + /* DWORD 5 */ + u8 csi_current[2]; + u8 csi_target[2]; + /* DWORD 6 */ + u8 sigevm; + u8 max_ex_pwr; + u8 ex_intf_flag:1; + u8 sgi_en:1; + u8 rxsc:2; + u8 reserve:4; +}; + +struct phy_sts_cck_8192s_t { + u8 adc_pwdb_x[4]; + u8 sq_rpt; + u8 cck_agc_rpt; +}; + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.c b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c new file mode 100644 index 00000000000..da86db86fa4 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c @@ -0,0 +1,733 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../base.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "fw.h" + +struct dig_t digtable; +static const u32 edca_setting_dl[PEER_MAX] = { + 0xa44f, /* 0 UNKNOWN */ + 0x5ea44f, /* 1 REALTEK_90 */ + 0x5ea44f, /* 2 REALTEK_92SE */ + 0xa630, /* 3 BROAD */ + 0xa44f, /* 4 RAL */ + 0xa630, /* 5 ATH */ + 0xa630, /* 6 CISCO */ + 0xa42b, /* 7 MARV */ +}; + +static const u32 edca_setting_dl_gmode[PEER_MAX] = { + 0x4322, /* 0 UNKNOWN */ + 0xa44f, /* 1 REALTEK_90 */ + 0x5ea44f, /* 2 REALTEK_92SE */ + 0xa42b, /* 3 BROAD */ + 0x5e4322, /* 4 RAL */ + 0x4322, /* 5 ATH */ + 0xa430, /* 6 CISCO */ + 0x5ea44f, /* 7 MARV */ +}; + +static const u32 edca_setting_ul[PEER_MAX] = { + 0x5e4322, /* 0 UNKNOWN */ + 0xa44f, /* 1 REALTEK_90 */ + 0x5ea44f, /* 2 REALTEK_92SE */ + 0x5ea322, /* 3 BROAD */ + 0x5ea422, /* 4 RAL */ + 0x5ea322, /* 5 ATH */ + 0x3ea44f, /* 6 CISCO */ + 0x5ea44f, /* 7 MARV */ +}; + +static void _rtl92s_dm_check_edca_turbo(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + + static u64 last_txok_cnt; + static u64 last_rxok_cnt; + u64 cur_txok_cnt = 0; + u64 cur_rxok_cnt = 0; + + u32 edca_be_ul = edca_setting_ul[mac->vendor]; + u32 edca_be_dl = edca_setting_dl[mac->vendor]; + u32 edca_gmode = edca_setting_dl_gmode[mac->vendor]; + + if (mac->link_state != MAC80211_LINKED) { + rtlpriv->dm.current_turbo_edca = false; + goto dm_checkedcaturbo_exit; + } + + if ((!rtlpriv->dm.is_any_nonbepkts) && + (!rtlpriv->dm.disable_framebursting)) { + cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt; + cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt; + + if (rtlpriv->phy.rf_type == RF_1T2R) { + if (cur_txok_cnt > 4 * cur_rxok_cnt) { + /* Uplink TP is present. */ + if (rtlpriv->dm.is_cur_rdlstate || + !rtlpriv->dm.current_turbo_edca) { + rtl_write_dword(rtlpriv, EDCAPARA_BE, + edca_be_ul); + rtlpriv->dm.is_cur_rdlstate = false; + } + } else {/* Balance TP is present. */ + if (!rtlpriv->dm.is_cur_rdlstate || + !rtlpriv->dm.current_turbo_edca) { + if (mac->mode == WIRELESS_MODE_G || + mac->mode == WIRELESS_MODE_B) + rtl_write_dword(rtlpriv, + EDCAPARA_BE, + edca_gmode); + else + rtl_write_dword(rtlpriv, + EDCAPARA_BE, + edca_be_dl); + rtlpriv->dm.is_cur_rdlstate = true; + } + } + rtlpriv->dm.current_turbo_edca = true; + } else { + if (cur_rxok_cnt > 4 * cur_txok_cnt) { + if (!rtlpriv->dm.is_cur_rdlstate || + !rtlpriv->dm.current_turbo_edca) { + if (mac->mode == WIRELESS_MODE_G || + mac->mode == WIRELESS_MODE_B) + rtl_write_dword(rtlpriv, + EDCAPARA_BE, + edca_gmode); + else + rtl_write_dword(rtlpriv, + EDCAPARA_BE, + edca_be_dl); + rtlpriv->dm.is_cur_rdlstate = true; + } + } else { + if (rtlpriv->dm.is_cur_rdlstate || + !rtlpriv->dm.current_turbo_edca) { + rtl_write_dword(rtlpriv, EDCAPARA_BE, + edca_be_ul); + rtlpriv->dm.is_cur_rdlstate = false; + } + } + rtlpriv->dm.current_turbo_edca = true; + } + } else { + if (rtlpriv->dm.current_turbo_edca) { + u8 tmp = AC0_BE; + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM, + (u8 *)(&tmp)); + rtlpriv->dm.current_turbo_edca = false; + } + } + +dm_checkedcaturbo_exit: + rtlpriv->dm.is_any_nonbepkts = false; + last_txok_cnt = rtlpriv->stats.txbytesunicast; + last_rxok_cnt = rtlpriv->stats.rxbytesunicast; +} + +static void _rtl92s_dm_txpowertracking_callback_thermalmeter( + struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 thermalvalue = 0; + + rtlpriv->dm.txpower_trackinginit = true; + + thermalvalue = (u8)rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0x1f); + + RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, + ("Readback Thermal Meter = 0x%x pre thermal meter 0x%x " + "eeprom_thermalmeter 0x%x\n", thermalvalue, + rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter)); + + if (thermalvalue) { + rtlpriv->dm.thermalvalue = thermalvalue; + rtl92s_phy_set_fw_cmd(hw, FW_CMD_TXPWR_TRACK_THERMAL); + } + + rtlpriv->dm.txpowercount = 0; +} + +static void _rtl92s_dm_check_txpowertracking_thermalmeter( + struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + static u8 tm_trigger; + u8 tx_power_checkcnt = 5; + + /* 2T2R TP issue */ + if (rtlphy->rf_type == RF_2T2R) + return; + + if (!rtlpriv->dm.txpower_tracking) + return; + + if (rtlpriv->dm.txpowercount <= tx_power_checkcnt) { + rtlpriv->dm.txpowercount++; + return; + } + + if (!tm_trigger) { + rtl_set_rfreg(hw, RF90_PATH_A, RF_T_METER, + RFREG_OFFSET_MASK, 0x60); + tm_trigger = 1; + } else { + _rtl92s_dm_txpowertracking_callback_thermalmeter(hw); + tm_trigger = 0; + } +} + +static void _rtl92s_dm_refresh_rateadaptive_mask(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rate_adaptive *ra = &(rtlpriv->ra); + + u32 low_rssi_thresh = 0; + u32 middle_rssi_thresh = 0; + u32 high_rssi_thresh = 0; + u8 rssi_level; + struct ieee80211_sta *sta = NULL; + + if (is_hal_stop(rtlhal)) + return; + + if (!rtlpriv->dm.useramask) + return; + + if (!rtlpriv->dm.inform_fw_driverctrldm) { + rtl92s_phy_set_fw_cmd(hw, FW_CMD_CTRL_DM_BY_DRIVER); + rtlpriv->dm.inform_fw_driverctrldm = true; + } + + rcu_read_lock(); + if (mac->opmode == NL80211_IFTYPE_STATION) + sta = get_sta(hw, mac->vif, mac->bssid); + if ((mac->link_state == MAC80211_LINKED) && + (mac->opmode == NL80211_IFTYPE_STATION)) { + switch (ra->pre_ratr_state) { + case DM_RATR_STA_HIGH: + high_rssi_thresh = 40; + middle_rssi_thresh = 30; + low_rssi_thresh = 20; + break; + case DM_RATR_STA_MIDDLE: + high_rssi_thresh = 44; + middle_rssi_thresh = 30; + low_rssi_thresh = 20; + break; + case DM_RATR_STA_LOW: + high_rssi_thresh = 44; + middle_rssi_thresh = 34; + low_rssi_thresh = 20; + break; + case DM_RATR_STA_ULTRALOW: + high_rssi_thresh = 44; + middle_rssi_thresh = 34; + low_rssi_thresh = 24; + break; + default: + high_rssi_thresh = 44; + middle_rssi_thresh = 34; + low_rssi_thresh = 24; + break; + } + + if (rtlpriv->dm.undecorated_smoothed_pwdb > + (long)high_rssi_thresh) { + ra->ratr_state = DM_RATR_STA_HIGH; + rssi_level = 1; + } else if (rtlpriv->dm.undecorated_smoothed_pwdb > + (long)middle_rssi_thresh) { + ra->ratr_state = DM_RATR_STA_LOW; + rssi_level = 3; + } else if (rtlpriv->dm.undecorated_smoothed_pwdb > + (long)low_rssi_thresh) { + ra->ratr_state = DM_RATR_STA_LOW; + rssi_level = 5; + } else { + ra->ratr_state = DM_RATR_STA_ULTRALOW; + rssi_level = 6; + } + + if (ra->pre_ratr_state != ra->ratr_state) { + RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD, ("RSSI = %ld " + "RSSI_LEVEL = %d PreState = %d, CurState = %d\n", + rtlpriv->dm.undecorated_smoothed_pwdb, + ra->ratr_state, + ra->pre_ratr_state, ra->ratr_state)); + + rtlpriv->cfg->ops->update_rate_tbl(hw, sta, + ra->ratr_state); + ra->pre_ratr_state = ra->ratr_state; + } + } + rcu_read_unlock(); +} + +static void _rtl92s_dm_switch_baseband_mrc(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + bool current_mrc; + bool enable_mrc = true; + long tmpentry_maxpwdb = 0; + u8 rssi_a = 0; + u8 rssi_b = 0; + + if (is_hal_stop(rtlhal)) + return; + + if ((rtlphy->rf_type == RF_1T1R) || (rtlphy->rf_type == RF_2T2R)) + return; + + rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_MRC, (u8 *)(¤t_mrc)); + + if (mac->link_state >= MAC80211_LINKED) { + if (rtlpriv->dm.undecorated_smoothed_pwdb > tmpentry_maxpwdb) { + rssi_a = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_A]; + rssi_b = rtlpriv->stats.rx_rssi_percentage[RF90_PATH_B]; + } + } + + /* MRC settings would NOT affect TP on Wireless B mode. */ + if (mac->mode != WIRELESS_MODE_B) { + if ((rssi_a == 0) && (rssi_b == 0)) { + enable_mrc = true; + } else if (rssi_b > 30) { + /* Turn on B-Path */ + enable_mrc = true; + } else if (rssi_b < 5) { + /* Turn off B-path */ + enable_mrc = false; + /* Take care of RSSI differentiation. */ + } else if (rssi_a > 15 && (rssi_a >= rssi_b)) { + if ((rssi_a - rssi_b) > 15) + /* Turn off B-path */ + enable_mrc = false; + else if ((rssi_a - rssi_b) < 10) + /* Turn on B-Path */ + enable_mrc = true; + else + enable_mrc = current_mrc; + } else { + /* Turn on B-Path */ + enable_mrc = true; + } + } + + /* Update MRC settings if needed. */ + if (enable_mrc != current_mrc) + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, + (u8 *)&enable_mrc); + +} + +void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->dm.current_turbo_edca = false; + rtlpriv->dm.is_any_nonbepkts = false; + rtlpriv->dm.is_cur_rdlstate = false; +} + +static void _rtl92s_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rate_adaptive *ra = &(rtlpriv->ra); + + ra->ratr_state = DM_RATR_STA_MAX; + ra->pre_ratr_state = DM_RATR_STA_MAX; + + if (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER) + rtlpriv->dm.useramask = true; + else + rtlpriv->dm.useramask = false; + + rtlpriv->dm.useramask = false; + rtlpriv->dm.inform_fw_driverctrldm = false; +} + +static void _rtl92s_dm_init_txpowertracking_thermalmeter( + struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->dm.txpower_tracking = true; + rtlpriv->dm.txpowercount = 0; + rtlpriv->dm.txpower_trackinginit = false; +} + +static void _rtl92s_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt); + u32 ret_value; + + ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, MASKDWORD); + falsealm_cnt->cnt_parity_fail = ((ret_value & 0xffff0000) >> 16); + + ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, MASKDWORD); + falsealm_cnt->cnt_rate_illegal = (ret_value & 0xffff); + falsealm_cnt->cnt_crc8_fail = ((ret_value & 0xffff0000) >> 16); + ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, MASKDWORD); + falsealm_cnt->cnt_mcs_fail = (ret_value & 0xffff); + + falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail + + falsealm_cnt->cnt_rate_illegal + falsealm_cnt->cnt_crc8_fail + + falsealm_cnt->cnt_mcs_fail; + + /* read CCK false alarm */ + ret_value = rtl_get_bbreg(hw, 0xc64, MASKDWORD); + falsealm_cnt->cnt_cck_fail = (ret_value & 0xffff); + falsealm_cnt->cnt_all = falsealm_cnt->cnt_ofdm_fail + + falsealm_cnt->cnt_cck_fail; +} + +static void rtl92s_backoff_enable_flag(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt); + + if (falsealm_cnt->cnt_all > digtable.fa_highthresh) { + if ((digtable.backoff_val - 6) < + digtable.backoffval_range_min) + digtable.backoff_val = digtable.backoffval_range_min; + else + digtable.backoff_val -= 6; + } else if (falsealm_cnt->cnt_all < digtable.fa_lowthresh) { + if ((digtable.backoff_val + 6) > + digtable.backoffval_range_max) + digtable.backoff_val = + digtable.backoffval_range_max; + else + digtable.backoff_val += 6; + } +} + +static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt); + static u8 initialized, force_write; + u8 initial_gain = 0; + + if ((digtable.pre_sta_connectstate == digtable.cur_sta_connectstate) || + (digtable.cur_sta_connectstate == DIG_STA_BEFORE_CONNECT)) { + if (digtable.cur_sta_connectstate == DIG_STA_BEFORE_CONNECT) { + if (rtlpriv->psc.rfpwr_state != ERFON) + return; + + if (digtable.backoff_enable_flag == true) + rtl92s_backoff_enable_flag(hw); + else + digtable.backoff_val = DM_DIG_BACKOFF; + + if ((digtable.rssi_val + 10 - digtable.backoff_val) > + digtable.rx_gain_range_max) + digtable.cur_igvalue = + digtable.rx_gain_range_max; + else if ((digtable.rssi_val + 10 - digtable.backoff_val) + < digtable.rx_gain_range_min) + digtable.cur_igvalue = + digtable.rx_gain_range_min; + else + digtable.cur_igvalue = digtable.rssi_val + 10 - + digtable.backoff_val; + + if (falsealm_cnt->cnt_all > 10000) + digtable.cur_igvalue = + (digtable.cur_igvalue > 0x33) ? + digtable.cur_igvalue : 0x33; + + if (falsealm_cnt->cnt_all > 16000) + digtable.cur_igvalue = + digtable.rx_gain_range_max; + /* connected -> connected or disconnected -> disconnected */ + } else { + /* Firmware control DIG, do nothing in driver dm */ + return; + } + /* disconnected -> connected or connected -> + * disconnected or beforeconnect->(dis)connected */ + } else { + /* Enable FW DIG */ + digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX; + rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_ENABLE); + + digtable.backoff_val = DM_DIG_BACKOFF; + digtable.cur_igvalue = rtlpriv->phy.default_initialgain[0]; + digtable.pre_igvalue = 0; + return; + } + + /* Forced writing to prevent from fw-dig overwriting. */ + if (digtable.pre_igvalue != rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1, + MASKBYTE0)) + force_write = 1; + + if ((digtable.pre_igvalue != digtable.cur_igvalue) || + !initialized || force_write) { + /* Disable FW DIG */ + rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_DISABLE); + + initial_gain = (u8)digtable.cur_igvalue; + + /* Set initial gain. */ + rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, initial_gain); + rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, initial_gain); + digtable.pre_igvalue = digtable.cur_igvalue; + initialized = 1; + force_write = 0; + } +} + +static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->mac80211.act_scanning) + return; + + /* Decide the current status and if modify initial gain or not */ + if (rtlpriv->mac80211.link_state >= MAC80211_LINKED || + rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC) + digtable.cur_sta_connectstate = DIG_STA_CONNECT; + else + digtable.cur_sta_connectstate = DIG_STA_DISCONNECT; + + digtable.rssi_val = rtlpriv->dm.undecorated_smoothed_pwdb; + + /* Change dig mode to rssi */ + if (digtable.cur_sta_connectstate != DIG_STA_DISCONNECT) { + if (digtable.dig_twoport_algorithm == + DIG_TWO_PORT_ALGO_FALSE_ALARM) { + digtable.dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI; + rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_MODE_SS); + } + } + + _rtl92s_dm_false_alarm_counter_statistics(hw); + _rtl92s_dm_initial_gain_sta_beforeconnect(hw); + + digtable.pre_sta_connectstate = digtable.cur_sta_connectstate; +} + +static void _rtl92s_dm_ctrl_initgain_byrssi(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + /* 2T2R TP issue */ + if (rtlphy->rf_type == RF_2T2R) + return; + + if (!rtlpriv->dm.dm_initialgain_enable) + return; + + if (digtable.dig_enable_flag == false) + return; + + _rtl92s_dm_ctrl_initgain_bytwoport(hw); +} + +static void _rtl92s_dm_dynamic_txpower(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + long undecorated_smoothed_pwdb; + long txpwr_threshold_lv1, txpwr_threshold_lv2; + + /* 2T2R TP issue */ + if (rtlphy->rf_type == RF_2T2R) + return; + + if (!rtlpriv->dm.dynamic_txpower_enable || + rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) { + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL; + return; + } + + if ((mac->link_state < MAC80211_LINKED) && + (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) { + RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE, + ("Not connected to any\n")); + + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL; + + rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL; + return; + } + + if (mac->link_state >= MAC80211_LINKED) { + if (mac->opmode == NL80211_IFTYPE_ADHOC) { + undecorated_smoothed_pwdb = + rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb; + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("AP Client PWDB = 0x%lx\n", + undecorated_smoothed_pwdb)); + } else { + undecorated_smoothed_pwdb = + rtlpriv->dm.undecorated_smoothed_pwdb; + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("STA Default Port PWDB = 0x%lx\n", + undecorated_smoothed_pwdb)); + } + } else { + undecorated_smoothed_pwdb = + rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb; + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("AP Ext Port PWDB = 0x%lx\n", + undecorated_smoothed_pwdb)); + } + + txpwr_threshold_lv2 = TX_POWER_NEAR_FIELD_THRESH_LVL2; + txpwr_threshold_lv1 = TX_POWER_NEAR_FIELD_THRESH_LVL1; + + if (rtl_get_bbreg(hw, 0xc90, MASKBYTE0) == 1) + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL; + else if (undecorated_smoothed_pwdb >= txpwr_threshold_lv2) + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL2; + else if ((undecorated_smoothed_pwdb < (txpwr_threshold_lv2 - 3)) && + (undecorated_smoothed_pwdb >= txpwr_threshold_lv1)) + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL1; + else if (undecorated_smoothed_pwdb < (txpwr_threshold_lv1 - 3)) + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL; + + if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl)) + rtl92s_phy_set_txpower(hw, rtlphy->current_channel); + + rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl; +} + +static void _rtl92s_dm_init_dig(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + /* Disable DIG scheme now.*/ + digtable.dig_enable_flag = true; + digtable.backoff_enable_flag = true; + + if ((rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER) && + (hal_get_firmwareversion(rtlpriv) >= 0x3c)) + digtable.dig_algorithm = DIG_ALGO_BY_TOW_PORT; + else + digtable.dig_algorithm = + DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM; + + digtable.dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI; + digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX; + /* off=by real rssi value, on=by digtable.rssi_val for new dig */ + digtable.dig_dbgmode = DM_DBG_OFF; + digtable.dig_slgorithm_switch = 0; + + /* 2007/10/04 MH Define init gain threshol. */ + digtable.dig_state = DM_STA_DIG_MAX; + digtable.dig_highpwrstate = DM_STA_DIG_MAX; + + digtable.cur_sta_connectstate = DIG_STA_DISCONNECT; + digtable.pre_sta_connectstate = DIG_STA_DISCONNECT; + digtable.cur_ap_connectstate = DIG_AP_DISCONNECT; + digtable.pre_ap_connectstate = DIG_AP_DISCONNECT; + + digtable.rssi_lowthresh = DM_DIG_THRESH_LOW; + digtable.rssi_highthresh = DM_DIG_THRESH_HIGH; + + digtable.fa_lowthresh = DM_FALSEALARM_THRESH_LOW; + digtable.fa_highthresh = DM_FALSEALARM_THRESH_HIGH; + + digtable.rssi_highpower_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW; + digtable.rssi_highpower_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH; + + /* for dig debug rssi value */ + digtable.rssi_val = 50; + digtable.backoff_val = DM_DIG_BACKOFF; + digtable.rx_gain_range_max = DM_DIG_MAX; + + digtable.rx_gain_range_min = DM_DIG_MIN; + + digtable.backoffval_range_max = DM_DIG_BACKOFF_MAX; + digtable.backoffval_range_min = DM_DIG_BACKOFF_MIN; +} + +static void _rtl92s_dm_init_dynamic_txpower(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if ((hal_get_firmwareversion(rtlpriv) >= 60) && + (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER)) + rtlpriv->dm.dynamic_txpower_enable = true; + else + rtlpriv->dm.dynamic_txpower_enable = false; + + rtlpriv->dm.last_dtp_lvl = TX_HIGHPWR_LEVEL_NORMAL; + rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL; +} + +void rtl92s_dm_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER; + rtlpriv->dm.undecorated_smoothed_pwdb = -1; + + _rtl92s_dm_init_dynamic_txpower(hw); + rtl92s_dm_init_edca_turbo(hw); + _rtl92s_dm_init_rate_adaptive_mask(hw); + _rtl92s_dm_init_txpowertracking_thermalmeter(hw); + _rtl92s_dm_init_dig(hw); + + rtl_write_dword(rtlpriv, WFM5, FW_CCA_CHK_ENABLE); +} + +void rtl92s_dm_watchdog(struct ieee80211_hw *hw) +{ + _rtl92s_dm_check_edca_turbo(hw); + _rtl92s_dm_check_txpowertracking_thermalmeter(hw); + _rtl92s_dm_ctrl_initgain_byrssi(hw); + _rtl92s_dm_dynamic_txpower(hw); + _rtl92s_dm_refresh_rateadaptive_mask(hw); + _rtl92s_dm_switch_baseband_mrc(hw); +} + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.h b/drivers/net/wireless/rtlwifi/rtl8192se/dm.h new file mode 100644 index 00000000000..9051a556acc --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.h @@ -0,0 +1,164 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __RTL_92S_DM_H__ +#define __RTL_92S_DM_H__ + +struct dig_t { + u8 dig_enable_flag; + u8 dig_algorithm; + u8 dig_twoport_algorithm; + u8 dig_ext_port_stage; + u8 dig_dbgmode; + u8 dig_slgorithm_switch; + + long rssi_lowthresh; + long rssi_highthresh; + + u32 fa_lowthresh; + u32 fa_highthresh; + + long rssi_highpower_lowthresh; + long rssi_highpower_highthresh; + + u8 dig_state; + u8 dig_highpwrstate; + u8 cur_sta_connectstate; + u8 pre_sta_connectstate; + u8 cur_ap_connectstate; + u8 pre_ap_connectstate; + + u8 cur_pd_thstate; + u8 pre_pd_thstate; + u8 cur_cs_ratiostate; + u8 pre_cs_ratiostate; + + u32 pre_igvalue; + u32 cur_igvalue; + + u8 backoff_enable_flag; + char backoff_val; + char backoffval_range_max; + char backoffval_range_min; + u8 rx_gain_range_max; + u8 rx_gain_range_min; + + long rssi_val; +}; + +enum dm_dig_alg { + DIG_ALGO_BY_FALSE_ALARM = 0, + DIG_ALGO_BY_RSSI = 1, + DIG_ALGO_BEFORE_CONNECT_BY_RSSI_AND_ALARM = 2, + DIG_ALGO_BY_TOW_PORT = 3, + DIG_ALGO_MAX +}; + +enum dm_dig_two_port_alg { + DIG_TWO_PORT_ALGO_RSSI = 0, + DIG_TWO_PORT_ALGO_FALSE_ALARM = 1, +}; + +enum dm_dig_dbg { + DM_DBG_OFF = 0, + DM_DBG_ON = 1, + DM_DBG_MAX +}; + +enum dm_dig_sta { + DM_STA_DIG_OFF = 0, + DM_STA_DIG_ON, + DM_STA_DIG_MAX +}; + +enum dm_dig_connect { + DIG_STA_DISCONNECT = 0, + DIG_STA_CONNECT = 1, + DIG_STA_BEFORE_CONNECT = 2, + DIG_AP_DISCONNECT = 3, + DIG_AP_CONNECT = 4, + DIG_AP_ADD_STATION = 5, + DIG_CONNECT_MAX +}; + +enum dm_dig_ext_port_alg { + DIG_EXT_PORT_STAGE_0 = 0, + DIG_EXT_PORT_STAGE_1 = 1, + DIG_EXT_PORT_STAGE_2 = 2, + DIG_EXT_PORT_STAGE_3 = 3, + DIG_EXT_PORT_STAGE_MAX = 4, +}; + +enum dm_ratr_sta { + DM_RATR_STA_HIGH = 0, + DM_RATR_STA_MIDDLEHIGH = 1, + DM_RATR_STA_MIDDLE = 2, + DM_RATR_STA_MIDDLELOW = 3, + DM_RATR_STA_LOW = 4, + DM_RATR_STA_ULTRALOW = 5, + DM_RATR_STA_MAX +}; + +#define DM_TYPE_BYFW 0 +#define DM_TYPE_BYDRIVER 1 + +#define TX_HIGH_PWR_LEVEL_NORMAL 0 +#define TX_HIGH_PWR_LEVEL_LEVEL1 1 +#define TX_HIGH_PWR_LEVEL_LEVEL2 2 + +#define HAL_DM_DIG_DISABLE BIT(0) /* Disable Dig */ +#define HAL_DM_HIPWR_DISABLE BIT(1) /* Disable High Power */ + +#define TX_HIGHPWR_LEVEL_NORMAL 0 +#define TX_HIGHPWR_LEVEL_NORMAL1 1 +#define TX_HIGHPWR_LEVEL_NORMAL2 2 + +#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74 +#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67 + +#define DM_DIG_THRESH_HIGH 40 +#define DM_DIG_THRESH_LOW 35 +#define DM_FALSEALARM_THRESH_LOW 40 +#define DM_FALSEALARM_THRESH_HIGH 1000 +#define DM_DIG_HIGH_PWR_THRESH_HIGH 75 +#define DM_DIG_HIGH_PWR_THRESH_LOW 70 +#define DM_DIG_BACKOFF 12 +#define DM_DIG_MAX 0x3e +#define DM_DIG_MIN 0x1c +#define DM_DIG_MIN_Netcore 0x12 +#define DM_DIG_BACKOFF_MAX 12 +#define DM_DIG_BACKOFF_MIN -4 + +extern struct dig_t digtable; + +void rtl92s_dm_watchdog(struct ieee80211_hw *hw); +void rtl92s_dm_init(struct ieee80211_hw *hw); +void rtl92s_dm_init_edca_turbo(struct ieee80211_hw *hw); + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c new file mode 100644 index 00000000000..3b5af0113d7 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c @@ -0,0 +1,654 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../pci.h" +#include "../base.h" +#include "reg.h" +#include "def.h" +#include "fw.h" + +static void _rtl92s_fw_set_rqpn(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtl_write_dword(rtlpriv, RQPN, 0xffffffff); + rtl_write_dword(rtlpriv, RQPN + 4, 0xffffffff); + rtl_write_byte(rtlpriv, RQPN + 8, 0xff); + rtl_write_byte(rtlpriv, RQPN + 0xB, 0x80); +} + +static bool _rtl92s_firmware_enable_cpu(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 ichecktime = 200; + u16 tmpu2b; + u8 tmpu1b, cpustatus = 0; + + _rtl92s_fw_set_rqpn(hw); + + /* Enable CPU. */ + tmpu1b = rtl_read_byte(rtlpriv, SYS_CLKR); + /* AFE source */ + rtl_write_byte(rtlpriv, SYS_CLKR, (tmpu1b | SYS_CPU_CLKSEL)); + + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | FEN_CPUEN)); + + /* Polling IMEM Ready after CPU has refilled. */ + do { + cpustatus = rtl_read_byte(rtlpriv, TCR); + if (cpustatus & IMEM_RDY) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("IMEM Ready after CPU has refilled.\n")); + break; + } + + udelay(100); + } while (ichecktime--); + + if (!(cpustatus & IMEM_RDY)) + return false; + + return true; +} + +static enum fw_status _rtl92s_firmware_get_nextstatus( + enum fw_status fw_currentstatus) +{ + enum fw_status next_fwstatus = 0; + + switch (fw_currentstatus) { + case FW_STATUS_INIT: + next_fwstatus = FW_STATUS_LOAD_IMEM; + break; + case FW_STATUS_LOAD_IMEM: + next_fwstatus = FW_STATUS_LOAD_EMEM; + break; + case FW_STATUS_LOAD_EMEM: + next_fwstatus = FW_STATUS_LOAD_DMEM; + break; + case FW_STATUS_LOAD_DMEM: + next_fwstatus = FW_STATUS_READY; + break; + default: + break; + } + + return next_fwstatus; +} + +static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + switch (rtlphy->rf_type) { + case RF_1T1R: + return 0x11; + break; + case RF_1T2R: + return 0x12; + break; + case RF_2T2R: + return 0x22; + break; + default: + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("Unknown RF type(%x)\n", + rtlphy->rf_type)); + break; + } + return 0x22; +} + +static void _rtl92s_firmwareheader_priveupdate(struct ieee80211_hw *hw, + struct fw_priv *pfw_priv) +{ + /* Update RF types for RATR settings. */ + pfw_priv->rf_config = _rtl92s_firmware_header_map_rftype(hw); +} + + + +static bool _rtl92s_cmd_send_packet(struct ieee80211_hw *hw, + struct sk_buff *skb, u8 last) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl8192_tx_ring *ring; + struct rtl_tx_desc *pdesc; + unsigned long flags; + u8 idx = 0; + + ring = &rtlpci->tx_ring[TXCMD_QUEUE]; + + spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags); + + idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; + pdesc = &ring->desc[idx]; + rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *)pdesc, 1, 1, skb); + __skb_queue_tail(&ring->queue, skb); + + spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags); + + return true; +} + +static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw, + u8 *code_virtual_address, u32 buffer_len) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct sk_buff *skb; + struct rtl_tcb_desc *tcb_desc; + unsigned char *seg_ptr; + u16 frag_threshold = MAX_FIRMWARE_CODE_SIZE; + u16 frag_length, frag_offset = 0; + u16 extra_descoffset = 0; + u8 last_inipkt = 0; + + _rtl92s_fw_set_rqpn(hw); + + if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Size over FIRMWARE_CODE_SIZE!\n")); + + return false; + } + + extra_descoffset = 0; + + do { + if ((buffer_len - frag_offset) > frag_threshold) { + frag_length = frag_threshold + extra_descoffset; + } else { + frag_length = (u16)(buffer_len - frag_offset + + extra_descoffset); + last_inipkt = 1; + } + + /* Allocate skb buffer to contain firmware */ + /* info and tx descriptor info. */ + skb = dev_alloc_skb(frag_length); + skb_reserve(skb, extra_descoffset); + seg_ptr = (u8 *)skb_put(skb, (u32)(frag_length - + extra_descoffset)); + memcpy(seg_ptr, code_virtual_address + frag_offset, + (u32)(frag_length - extra_descoffset)); + + tcb_desc = (struct rtl_tcb_desc *)(skb->cb); + tcb_desc->queue_index = TXCMD_QUEUE; + tcb_desc->cmd_or_init = DESC_PACKET_TYPE_INIT; + tcb_desc->last_inipkt = last_inipkt; + + _rtl92s_cmd_send_packet(hw, skb, last_inipkt); + + frag_offset += (frag_length - extra_descoffset); + + } while (frag_offset < buffer_len); + + rtl_write_byte(rtlpriv, TP_POLL, TPPOLL_CQ); + + return true ; +} + +static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw, + u8 loadfw_status) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rt_firmware *firmware = (struct rt_firmware *)rtlhal->pfirmware; + u32 tmpu4b; + u8 cpustatus = 0; + short pollingcnt = 1000; + bool rtstatus = true; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("LoadStaus(%d)\n", + loadfw_status)); + + firmware->fwstatus = (enum fw_status)loadfw_status; + + switch (loadfw_status) { + case FW_STATUS_LOAD_IMEM: + /* Polling IMEM code done. */ + do { + cpustatus = rtl_read_byte(rtlpriv, TCR); + if (cpustatus & IMEM_CODE_DONE) + break; + udelay(5); + } while (pollingcnt--); + + if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("FW_STATUS_LOAD_IMEM" + " FAIL CPU, Status=%x\r\n", cpustatus)); + goto status_check_fail; + } + break; + + case FW_STATUS_LOAD_EMEM: + /* Check Put Code OK and Turn On CPU */ + /* Polling EMEM code done. */ + do { + cpustatus = rtl_read_byte(rtlpriv, TCR); + if (cpustatus & EMEM_CODE_DONE) + break; + udelay(5); + } while (pollingcnt--); + + if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("FW_STATUS_LOAD_EMEM" + " FAIL CPU, Status=%x\r\n", cpustatus)); + goto status_check_fail; + } + + /* Turn On CPU */ + rtstatus = _rtl92s_firmware_enable_cpu(hw); + if (rtstatus != true) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Enable CPU fail!\n")); + goto status_check_fail; + } + break; + + case FW_STATUS_LOAD_DMEM: + /* Polling DMEM code done */ + do { + cpustatus = rtl_read_byte(rtlpriv, TCR); + if (cpustatus & DMEM_CODE_DONE) + break; + udelay(5); + } while (pollingcnt--); + + if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Polling DMEM code done" + " fail ! cpustatus(%#x)\n", cpustatus)); + goto status_check_fail; + } + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("DMEM code download success," + " cpustatus(%#x)\n", cpustatus)); + + /* Prevent Delay too much and being scheduled out */ + /* Polling Load Firmware ready */ + pollingcnt = 2000; + do { + cpustatus = rtl_read_byte(rtlpriv, TCR); + if (cpustatus & FWRDY) + break; + udelay(40); + } while (pollingcnt--); + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("Polling Load Firmware ready," + " cpustatus(%x)\n", cpustatus)); + + if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) || + (pollingcnt <= 0)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Polling Load Firmware" + " ready fail ! cpustatus(%x)\n", cpustatus)); + goto status_check_fail; + } + + /* If right here, we can set TCR/RCR to desired value */ + /* and config MAC lookback mode to normal mode */ + tmpu4b = rtl_read_dword(rtlpriv, TCR); + rtl_write_dword(rtlpriv, TCR, (tmpu4b & (~TCR_ICV))); + + tmpu4b = rtl_read_dword(rtlpriv, RCR); + rtl_write_dword(rtlpriv, RCR, (tmpu4b | RCR_APPFCS | + RCR_APP_ICV | RCR_APP_MIC)); + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("Current RCR settings(%#x)\n", tmpu4b)); + + /* Set to normal mode. */ + rtl_write_byte(rtlpriv, LBKMD_SEL, LBK_NORMAL); + break; + + default: + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("Unknown status check!\n")); + rtstatus = false; + break; + } + +status_check_fail: + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("loadfw_status(%d), " + "rtstatus(%x)\n", loadfw_status, rtstatus)); + return rtstatus; +} + +int rtl92s_download_fw(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rt_firmware *firmware = NULL; + struct fw_hdr *pfwheader; + struct fw_priv *pfw_priv = NULL; + u8 *puc_mappedfile = NULL; + u32 ul_filelength = 0; + u32 file_length = 0; + u8 fwhdr_size = RT_8192S_FIRMWARE_HDR_SIZE; + u8 fwstatus = FW_STATUS_INIT; + bool rtstatus = true; + + if (!rtlhal->pfirmware) + return 1; + + firmware = (struct rt_firmware *)rtlhal->pfirmware; + firmware->fwstatus = FW_STATUS_INIT; + + puc_mappedfile = firmware->sz_fw_tmpbuffer; + file_length = firmware->sz_fw_tmpbufferlen; + + /* 1. Retrieve FW header. */ + firmware->pfwheader = (struct fw_hdr *) puc_mappedfile; + pfwheader = firmware->pfwheader; + firmware->firmwareversion = byte(pfwheader->version, 0); + firmware->pfwheader->fwpriv.hci_sel = 1;/* pcie */ + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("signature:%x, version:" + "%x, size:%x," + "imemsize:%x, sram size:%x\n", pfwheader->signature, + pfwheader->version, pfwheader->dmem_size, + pfwheader->img_imem_size, pfwheader->img_sram_size)); + + /* 2. Retrieve IMEM image. */ + if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size > + sizeof(firmware->fw_imem))) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("memory for data image is less than IMEM required\n")); + goto fail; + } else { + puc_mappedfile += fwhdr_size; + + memcpy(firmware->fw_imem, puc_mappedfile, + pfwheader->img_imem_size); + firmware->fw_imem_len = pfwheader->img_imem_size; + } + + /* 3. Retriecve EMEM image. */ + if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("memory for data image is less than EMEM required\n")); + goto fail; + } else { + puc_mappedfile += firmware->fw_imem_len; + + memcpy(firmware->fw_emem, puc_mappedfile, + pfwheader->img_sram_size); + firmware->fw_emem_len = pfwheader->img_sram_size; + } + + /* 4. download fw now */ + fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus); + while (fwstatus != FW_STATUS_READY) { + /* Image buffer redirection. */ + switch (fwstatus) { + case FW_STATUS_LOAD_IMEM: + puc_mappedfile = firmware->fw_imem; + ul_filelength = firmware->fw_imem_len; + break; + case FW_STATUS_LOAD_EMEM: + puc_mappedfile = firmware->fw_emem; + ul_filelength = firmware->fw_emem_len; + break; + case FW_STATUS_LOAD_DMEM: + /* Partial update the content of header private. */ + pfwheader = firmware->pfwheader; + pfw_priv = &pfwheader->fwpriv; + _rtl92s_firmwareheader_priveupdate(hw, pfw_priv); + puc_mappedfile = (u8 *)(firmware->pfwheader) + + RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE; + ul_filelength = fwhdr_size - + RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Unexpected Download step!!\n")); + goto fail; + break; + } + + /* <2> Download image file */ + rtstatus = _rtl92s_firmware_downloadcode(hw, puc_mappedfile, + ul_filelength); + + if (rtstatus != true) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("fail!\n")); + goto fail; + } + + /* <3> Check whether load FW process is ready */ + rtstatus = _rtl92s_firmware_checkready(hw, fwstatus); + if (rtstatus != true) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("fail!\n")); + goto fail; + } + + fwstatus = _rtl92s_firmware_get_nextstatus(firmware->fwstatus); + } + + return rtstatus; +fail: + return 0; +} + +static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen, + u32 cmd_num, u32 *pelement_id, u32 *pcmd_len, + u8 **pcmb_buffer, u8 *cmd_start_seq) +{ + u32 totallen = 0, len = 0, tx_desclen = 0; + u32 pre_continueoffset = 0; + u8 *ph2c_buffer; + u8 i = 0; + + do { + /* 8 - Byte aligment */ + len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); + + /* Buffer length is not enough */ + if (h2cbufferlen < totallen + len + tx_desclen) + break; + + /* Clear content */ + ph2c_buffer = (u8 *)skb_put(skb, (u32)len); + memset((ph2c_buffer + totallen + tx_desclen), 0, len); + + /* CMD len */ + SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen), + 0, 16, pcmd_len[i]); + + /* CMD ID */ + SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen), + 16, 8, pelement_id[i]); + + /* CMD Sequence */ + *cmd_start_seq = *cmd_start_seq % 0x80; + SET_BITS_TO_LE_4BYTE((ph2c_buffer + totallen + tx_desclen), + 24, 7, *cmd_start_seq); + ++*cmd_start_seq; + + /* Copy memory */ + memcpy((ph2c_buffer + totallen + tx_desclen + + H2C_TX_CMD_HDR_LEN), pcmb_buffer[i], pcmd_len[i]); + + /* CMD continue */ + /* set the continue in prevoius cmd. */ + if (i < cmd_num - 1) + SET_BITS_TO_LE_4BYTE((ph2c_buffer + pre_continueoffset), + 31, 1, 1); + + pre_continueoffset = totallen; + + totallen += len; + } while (++i < cmd_num); + + return totallen; +} + +static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len) +{ + u32 totallen = 0, len = 0, tx_desclen = 0; + u8 i = 0; + + do { + /* 8 - Byte aligment */ + len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); + + /* Buffer length is not enough */ + if (h2cbufferlen < totallen + len + tx_desclen) + break; + + totallen += len; + } while (++i < cmd_num); + + return totallen + tx_desclen; +} + +static bool _rtl92s_firmware_set_h2c_cmd(struct ieee80211_hw *hw, u8 h2c_cmd, + u8 *pcmd_buffer) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_tcb_desc *cb_desc; + struct sk_buff *skb; + u32 element_id = 0; + u32 cmd_len = 0; + u32 len; + + switch (h2c_cmd) { + case FW_H2C_SETPWRMODE: + element_id = H2C_SETPWRMODE_CMD ; + cmd_len = sizeof(struct h2c_set_pwrmode_parm); + break; + case FW_H2C_JOINBSSRPT: + element_id = H2C_JOINBSSRPT_CMD; + cmd_len = sizeof(struct h2c_joinbss_rpt_parm); + break; + case FW_H2C_WOWLAN_UPDATE_GTK: + element_id = H2C_WOWLAN_UPDATE_GTK_CMD; + cmd_len = sizeof(struct h2c_wpa_two_way_parm); + break; + case FW_H2C_WOWLAN_UPDATE_IV: + element_id = H2C_WOWLAN_UPDATE_IV_CMD; + cmd_len = sizeof(unsigned long long); + break; + case FW_H2C_WOWLAN_OFFLOAD: + element_id = H2C_WOWLAN_FW_OFFLOAD; + cmd_len = sizeof(u8); + break; + default: + break; + } + + len = _rtl92s_get_h2c_cmdlen(MAX_TRANSMIT_BUFFER_SIZE, 1, &cmd_len); + skb = dev_alloc_skb(len); + cb_desc = (struct rtl_tcb_desc *)(skb->cb); + cb_desc->queue_index = TXCMD_QUEUE; + cb_desc->cmd_or_init = DESC_PACKET_TYPE_NORMAL; + cb_desc->last_inipkt = false; + + _rtl92s_fill_h2c_cmd(skb, MAX_TRANSMIT_BUFFER_SIZE, 1, &element_id, + &cmd_len, &pcmd_buffer, &rtlhal->h2c_txcmd_seq); + _rtl92s_cmd_send_packet(hw, skb, false); + rtlpriv->cfg->ops->tx_polling(hw, TXCMD_QUEUE); + + return true; +} + +void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 Mode) +{ + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct h2c_set_pwrmode_parm pwrmode; + u16 max_wakeup_period = 0; + + pwrmode.mode = Mode; + pwrmode.flag_low_traffic_en = 0; + pwrmode.flag_lpnav_en = 0; + pwrmode.flag_rf_low_snr_en = 0; + pwrmode.flag_dps_en = 0; + pwrmode.bcn_rx_en = 0; + pwrmode.bcn_to = 0; + SET_BITS_TO_LE_2BYTE((u8 *)(&pwrmode) + 8, 0, 16, + mac->vif->bss_conf.beacon_int); + pwrmode.app_itv = 0; + pwrmode.awake_bcn_itvl = ppsc->reg_max_lps_awakeintvl; + pwrmode.smart_ps = 1; + pwrmode.bcn_pass_period = 10; + + /* Set beacon pass count */ + if (pwrmode.mode == FW_PS_MIN_MODE) + max_wakeup_period = mac->vif->bss_conf.beacon_int; + else if (pwrmode.mode == FW_PS_MAX_MODE) + max_wakeup_period = mac->vif->bss_conf.beacon_int * + mac->vif->bss_conf.dtim_period; + + if (max_wakeup_period >= 500) + pwrmode.bcn_pass_cnt = 1; + else if ((max_wakeup_period >= 300) && (max_wakeup_period < 500)) + pwrmode.bcn_pass_cnt = 2; + else if ((max_wakeup_period >= 200) && (max_wakeup_period < 300)) + pwrmode.bcn_pass_cnt = 3; + else if ((max_wakeup_period >= 20) && (max_wakeup_period < 200)) + pwrmode.bcn_pass_cnt = 5; + else + pwrmode.bcn_pass_cnt = 1; + + _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_SETPWRMODE, (u8 *)&pwrmode); + +} + +void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, + u8 mstatus, u8 ps_qosinfo) +{ + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct h2c_joinbss_rpt_parm joinbss_rpt; + + joinbss_rpt.opmode = mstatus; + joinbss_rpt.ps_qos_info = ps_qosinfo; + joinbss_rpt.bssid[0] = mac->bssid[0]; + joinbss_rpt.bssid[1] = mac->bssid[1]; + joinbss_rpt.bssid[2] = mac->bssid[2]; + joinbss_rpt.bssid[3] = mac->bssid[3]; + joinbss_rpt.bssid[4] = mac->bssid[4]; + joinbss_rpt.bssid[5] = mac->bssid[5]; + SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 8, 0, 16, + mac->vif->bss_conf.beacon_int); + SET_BITS_TO_LE_2BYTE((u8 *)(&joinbss_rpt) + 10, 0, 16, mac->assoc_id); + + _rtl92s_firmware_set_h2c_cmd(hw, FW_H2C_JOINBSSRPT, (u8 *)&joinbss_rpt); +} + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h new file mode 100644 index 00000000000..74cc503efe8 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h @@ -0,0 +1,375 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __REALTEK_FIRMWARE92S_H__ +#define __REALTEK_FIRMWARE92S_H__ + +#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 +#define RTL8190_CPU_START_OFFSET 0x80 +/* Firmware Local buffer size. 64k */ +#define MAX_FIRMWARE_CODE_SIZE 0xFF00 + +#define RT_8192S_FIRMWARE_HDR_SIZE 80 +#define RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE 32 + +/* support till 64 bit bus width OS */ +#define MAX_DEV_ADDR_SIZE 8 +#define MAX_FIRMWARE_INFORMATION_SIZE 32 +#define MAX_802_11_HEADER_LENGTH (40 + \ + MAX_FIRMWARE_INFORMATION_SIZE) +#define ENCRYPTION_MAX_OVERHEAD 128 +#define MAX_FRAGMENT_COUNT 8 +#define MAX_TRANSMIT_BUFFER_SIZE (1600 + \ + (MAX_802_11_HEADER_LENGTH + \ + ENCRYPTION_MAX_OVERHEAD) *\ + MAX_FRAGMENT_COUNT) + +#define H2C_TX_CMD_HDR_LEN 8 + +/* The following DM control code are for Reg0x364, */ +#define FW_DIG_ENABLE_CTL BIT(0) +#define FW_HIGH_PWR_ENABLE_CTL BIT(1) +#define FW_SS_CTL BIT(2) +#define FW_RA_INIT_CTL BIT(3) +#define FW_RA_BG_CTL BIT(4) +#define FW_RA_N_CTL BIT(5) +#define FW_PWR_TRK_CTL BIT(6) +#define FW_IQK_CTL BIT(7) +#define FW_FA_CTL BIT(8) +#define FW_DRIVER_CTRL_DM_CTL BIT(9) +#define FW_PAPE_CTL_BY_SW_HW BIT(10) +#define FW_DISABLE_ALL_DM 0 +#define FW_PWR_TRK_PARAM_CLR 0x0000ffff +#define FW_RA_PARAM_CLR 0xffff0000 + +enum desc_packet_type { + DESC_PACKET_TYPE_INIT = 0, + DESC_PACKET_TYPE_NORMAL = 1, +}; + +/* 8-bytes alignment required */ +struct fw_priv { + /* --- long word 0 ---- */ + /* 0x12: CE product, 0x92: IT product */ + u8 signature_0; + /* 0x87: CE product, 0x81: IT product */ + u8 signature_1; + /* 0x81: PCI-AP, 01:PCIe, 02: 92S-U, + * 0x82: USB-AP, 0x12: 72S-U, 03:SDIO */ + u8 hci_sel; + /* the same value as reigster value */ + u8 chip_version; + /* customer ID low byte */ + u8 customer_id_0; + /* customer ID high byte */ + u8 customer_id_1; + /* 0x11: 1T1R, 0x12: 1T2R, + * 0x92: 1T2R turbo, 0x22: 2T2R */ + u8 rf_config; + /* 4: 4EP, 6: 6EP, 11: 11EP */ + u8 usb_ep_num; + + /* --- long word 1 ---- */ + /* regulatory class bit map 0 */ + u8 regulatory_class_0; + /* regulatory class bit map 1 */ + u8 regulatory_class_1; + /* regulatory class bit map 2 */ + u8 regulatory_class_2; + /* regulatory class bit map 3 */ + u8 regulatory_class_3; + /* 0:SWSI, 1:HWSI, 2:HWPI */ + u8 rfintfs; + u8 def_nettype; + u8 rsvd010; + u8 rsvd011; + + /* --- long word 2 ---- */ + /* 0x00: normal, 0x03: MACLBK, 0x01: PHYLBK */ + u8 lbk_mode; + /* 1: for MP use, 0: for normal + * driver (to be discussed) */ + u8 mp_mode; + u8 rsvd020; + u8 rsvd021; + u8 rsvd022; + u8 rsvd023; + u8 rsvd024; + u8 rsvd025; + + /* --- long word 3 ---- */ + /* QoS enable */ + u8 qos_en; + /* 40MHz BW enable */ + /* 4181 convert AMSDU to AMPDU, 0: disable */ + u8 bw_40mhz_en; + u8 amsdu2ampdu_en; + /* 11n AMPDU enable */ + u8 ampdu_en; + /* FW offloads, 0: driver handles */ + u8 rate_control_offload; + /* FW offloads, 0: driver handles */ + u8 aggregation_offload; + u8 rsvd030; + u8 rsvd031; + + /* --- long word 4 ---- */ + /* 1. FW offloads, 0: driver handles */ + u8 beacon_offload; + /* 2. FW offloads, 0: driver handles */ + u8 mlme_offload; + /* 3. FW offloads, 0: driver handles */ + u8 hwpc_offload; + /* 4. FW offloads, 0: driver handles */ + u8 tcp_checksum_offload; + /* 5. FW offloads, 0: driver handles */ + u8 tcp_offload; + /* 6. FW offloads, 0: driver handles */ + u8 ps_control_offload; + /* 7. FW offloads, 0: driver handles */ + u8 wwlan_offload; + u8 rsvd040; + + /* --- long word 5 ---- */ + /* tcp tx packet length low byte */ + u8 tcp_tx_frame_len_L; + /* tcp tx packet length high byte */ + u8 tcp_tx_frame_len_H; + /* tcp rx packet length low byte */ + u8 tcp_rx_frame_len_L; + /* tcp rx packet length high byte */ + u8 tcp_rx_frame_len_H; + u8 rsvd050; + u8 rsvd051; + u8 rsvd052; + u8 rsvd053; +}; + +/* 8-byte alinment required */ +struct fw_hdr { + + /* --- LONG WORD 0 ---- */ + u16 signature; + /* 0x8000 ~ 0x8FFF for FPGA version, + * 0x0000 ~ 0x7FFF for ASIC version, */ + u16 version; + /* define the size of boot loader */ + u32 dmem_size; + + + /* --- LONG WORD 1 ---- */ + /* define the size of FW in IMEM */ + u32 img_imem_size; + /* define the size of FW in SRAM */ + u32 img_sram_size; + + /* --- LONG WORD 2 ---- */ + /* define the size of DMEM variable */ + u32 fw_priv_size; + u32 rsvd0; + + /* --- LONG WORD 3 ---- */ + u32 rsvd1; + u32 rsvd2; + + struct fw_priv fwpriv; + +} ; + +enum fw_status { + FW_STATUS_INIT = 0, + FW_STATUS_LOAD_IMEM = 1, + FW_STATUS_LOAD_EMEM = 2, + FW_STATUS_LOAD_DMEM = 3, + FW_STATUS_READY = 4, +}; + +struct rt_firmware { + struct fw_hdr *pfwheader; + enum fw_status fwstatus; + u16 firmwareversion; + u8 fw_imem[RTL8190_MAX_FIRMWARE_CODE_SIZE]; + u8 fw_emem[RTL8190_MAX_FIRMWARE_CODE_SIZE]; + u32 fw_imem_len; + u32 fw_emem_len; + u8 sz_fw_tmpbuffer[164000]; + u32 sz_fw_tmpbufferlen; + u16 cmdpacket_fragthresold; +}; + +struct h2c_set_pwrmode_parm { + u8 mode; + u8 flag_low_traffic_en; + u8 flag_lpnav_en; + u8 flag_rf_low_snr_en; + /* 1: dps, 0: 32k */ + u8 flag_dps_en; + u8 bcn_rx_en; + u8 bcn_pass_cnt; + /* beacon TO (ms). ¡§=0¡¨ no limit. */ + u8 bcn_to; + u16 bcn_itv; + /* only for VOIP mode. */ + u8 app_itv; + u8 awake_bcn_itvl; + u8 smart_ps; + /* unit: 100 ms */ + u8 bcn_pass_period; +}; + +struct h2c_joinbss_rpt_parm { + u8 opmode; + u8 ps_qos_info; + u8 bssid[6]; + u16 bcnitv; + u16 aid; +} ; + +struct h2c_wpa_ptk { + /* EAPOL-Key Key Confirmation Key (KCK) */ + u8 kck[16]; + /* EAPOL-Key Key Encryption Key (KEK) */ + u8 kek[16]; + /* Temporal Key 1 (TK1) */ + u8 tk1[16]; + union { + /* Temporal Key 2 (TK2) */ + u8 tk2[16]; + struct { + u8 tx_mic_key[8]; + u8 rx_mic_key[8]; + } athu; + } u; +}; + +struct h2c_wpa_two_way_parm { + /* algorithm TKIP or AES */ + u8 pairwise_en_alg; + u8 group_en_alg; + struct h2c_wpa_ptk wpa_ptk_value; +} ; + +enum h2c_cmd { + FW_H2C_SETPWRMODE = 0, + FW_H2C_JOINBSSRPT = 1, + FW_H2C_WOWLAN_UPDATE_GTK = 2, + FW_H2C_WOWLAN_UPDATE_IV = 3, + FW_H2C_WOWLAN_OFFLOAD = 4, +}; + +enum fw_h2c_cmd { + H2C_READ_MACREG_CMD, /*0*/ + H2C_WRITE_MACREG_CMD, + H2C_READBB_CMD, + H2C_WRITEBB_CMD, + H2C_READRF_CMD, + H2C_WRITERF_CMD, /*5*/ + H2C_READ_EEPROM_CMD, + H2C_WRITE_EEPROM_CMD, + H2C_READ_EFUSE_CMD, + H2C_WRITE_EFUSE_CMD, + H2C_READ_CAM_CMD, /*10*/ + H2C_WRITE_CAM_CMD, + H2C_SETBCNITV_CMD, + H2C_SETMBIDCFG_CMD, + H2C_JOINBSS_CMD, + H2C_DISCONNECT_CMD, /*15*/ + H2C_CREATEBSS_CMD, + H2C_SETOPMode_CMD, + H2C_SITESURVEY_CMD, + H2C_SETAUTH_CMD, + H2C_SETKEY_CMD, /*20*/ + H2C_SETSTAKEY_CMD, + H2C_SETASSOCSTA_CMD, + H2C_DELASSOCSTA_CMD, + H2C_SETSTAPWRSTATE_CMD, + H2C_SETBASICRATE_CMD, /*25*/ + H2C_GETBASICRATE_CMD, + H2C_SETDATARATE_CMD, + H2C_GETDATARATE_CMD, + H2C_SETPHYINFO_CMD, + H2C_GETPHYINFO_CMD, /*30*/ + H2C_SETPHY_CMD, + H2C_GETPHY_CMD, + H2C_READRSSI_CMD, + H2C_READGAIN_CMD, + H2C_SETATIM_CMD, /*35*/ + H2C_SETPWRMODE_CMD, + H2C_JOINBSSRPT_CMD, + H2C_SETRATABLE_CMD, + H2C_GETRATABLE_CMD, + H2C_GETCCXREPORT_CMD, /*40*/ + H2C_GETDTMREPORT_CMD, + H2C_GETTXRATESTATICS_CMD, + H2C_SETUSBSUSPEND_CMD, + H2C_SETH2CLBK_CMD, + H2C_TMP1, /*45*/ + H2C_WOWLAN_UPDATE_GTK_CMD, + H2C_WOWLAN_FW_OFFLOAD, + H2C_TMP2, + H2C_TMP3, + H2C_WOWLAN_UPDATE_IV_CMD, /*50*/ + H2C_TMP4, + MAX_H2CCMD /*52*/ +}; + +/* The following macros are used for FW + * CMD map and parameter updated. */ +#define FW_CMD_IO_CLR(rtlpriv, _Bit) \ + do { \ + udelay(1000); \ + rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit); \ + } while (0); + +#define FW_CMD_IO_UPDATE(rtlpriv, _val) \ + rtlpriv->rtlhal.fwcmd_iomap = _val; + +#define FW_CMD_IO_SET(rtlpriv, _val) \ + do { \ + rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val); \ + FW_CMD_IO_UPDATE(rtlpriv, _val); \ + } while (0); + +#define FW_CMD_PARA_SET(rtlpriv, _val) \ + do { \ + rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val); \ + rtlpriv->rtlhal.fwcmd_ioparam = _val; \ + } while (0); + +#define FW_CMD_IO_QUERY(rtlpriv) \ + (u16)(rtlpriv->rtlhal.fwcmd_iomap) +#define FW_CMD_IO_PARA_QUERY(rtlpriv) \ + ((u32)(rtlpriv->rtlhal.fwcmd_ioparam)) + +int rtl92s_download_fw(struct ieee80211_hw *hw); +void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode); +void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, + u8 mstatus, u8 ps_qosinfo); + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c new file mode 100644 index 00000000000..2e9005d0454 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -0,0 +1,2512 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../efuse.h" +#include "../base.h" +#include "../regd.h" +#include "../cam.h" +#include "../ps.h" +#include "../pci.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "fw.h" +#include "led.h" +#include "hw.h" + +void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + switch (variable) { + case HW_VAR_RCR: { + *((u32 *) (val)) = rtlpci->receive_config; + break; + } + case HW_VAR_RF_STATE: { + *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; + break; + } + case HW_VAR_FW_PSMODE_STATUS: { + *((bool *) (val)) = ppsc->fw_current_inpsmode; + break; + } + case HW_VAR_CORRECT_TSF: { + u64 tsf; + u32 *ptsf_low = (u32 *)&tsf; + u32 *ptsf_high = ((u32 *)&tsf) + 1; + + *ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4)); + *ptsf_low = rtl_read_dword(rtlpriv, TSFR); + + *((u64 *) (val)) = tsf; + + break; + } + case HW_VAR_MRC: { + *((bool *)(val)) = rtlpriv->dm.current_mrc_switch; + break; + } + default: { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + } +} + +void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + switch (variable) { + case HW_VAR_ETHER_ADDR:{ + rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]); + rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]); + break; + } + case HW_VAR_BASIC_RATE:{ + u16 rate_cfg = ((u16 *) val)[0]; + u8 rate_index = 0; + + if (rtlhal->version == VERSION_8192S_ACUT) + rate_cfg = rate_cfg & 0x150; + else + rate_cfg = rate_cfg & 0x15f; + + rate_cfg |= 0x01; + + rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff); + rtl_write_byte(rtlpriv, RRSR + 1, + (rate_cfg >> 8) & 0xff); + + while (rate_cfg > 0x1) { + rate_cfg = (rate_cfg >> 1); + rate_index++; + } + rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index); + + break; + } + case HW_VAR_BSSID:{ + rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]); + rtl_write_word(rtlpriv, BSSIDR + 4, + ((u16 *)(val + 4))[0]); + break; + } + case HW_VAR_SIFS:{ + rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]); + rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]); + break; + } + case HW_VAR_SLOT_TIME:{ + u8 e_aci; + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("HW_VAR_SLOT_TIME %x\n", val[0])); + + rtl_write_byte(rtlpriv, SLOT_TIME, val[0]); + + for (e_aci = 0; e_aci < AC_MAX; e_aci++) { + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_AC_PARAM, + (u8 *)(&e_aci)); + } + break; + } + case HW_VAR_ACK_PREAMBLE:{ + u8 reg_tmp; + u8 short_preamble = (bool) (*(u8 *) val); + reg_tmp = (mac->cur_40_prime_sc) << 5; + if (short_preamble) + reg_tmp |= 0x80; + + rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp); + break; + } + case HW_VAR_AMPDU_MIN_SPACE:{ + u8 min_spacing_to_set; + u8 sec_min_space; + + min_spacing_to_set = *((u8 *)val); + if (min_spacing_to_set <= 7) { + if (rtlpriv->sec.pairwise_enc_algorithm == + NO_ENCRYPTION) + sec_min_space = 0; + else + sec_min_space = 1; + + if (min_spacing_to_set < sec_min_space) + min_spacing_to_set = sec_min_space; + if (min_spacing_to_set > 5) + min_spacing_to_set = 5; + + mac->min_space_cfg = + ((mac->min_space_cfg & 0xf8) | + min_spacing_to_set); + + *val = min_spacing_to_set; + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", + mac->min_space_cfg)); + + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, + mac->min_space_cfg); + } + break; + } + case HW_VAR_SHORTGI_DENSITY:{ + u8 density_to_set; + + density_to_set = *((u8 *) val); + mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg; + mac->min_space_cfg |= (density_to_set << 3); + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("Set HW_VAR_SHORTGI_DENSITY: %#x\n", + mac->min_space_cfg)); + + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, + mac->min_space_cfg); + + break; + } + case HW_VAR_AMPDU_FACTOR:{ + u8 factor_toset; + u8 regtoset; + u8 factorlevel[18] = { + 2, 4, 4, 7, 7, 13, 13, + 13, 2, 7, 7, 13, 13, + 15, 15, 15, 15, 0}; + u8 index = 0; + + factor_toset = *((u8 *) val); + if (factor_toset <= 3) { + factor_toset = (1 << (factor_toset + 2)); + if (factor_toset > 0xf) + factor_toset = 0xf; + + for (index = 0; index < 17; index++) { + if (factorlevel[index] > factor_toset) + factorlevel[index] = + factor_toset; + } + + for (index = 0; index < 8; index++) { + regtoset = ((factorlevel[index * 2]) | + (factorlevel[index * + 2 + 1] << 4)); + rtl_write_byte(rtlpriv, + AGGLEN_LMT_L + index, + regtoset); + } + + regtoset = ((factorlevel[16]) | + (factorlevel[17] << 4)); + rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset); + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("Set HW_VAR_AMPDU_FACTOR: %#x\n", + factor_toset)); + } + break; + } + case HW_VAR_AC_PARAM:{ + u8 e_aci = *((u8 *) val); + rtl92s_dm_init_edca_turbo(hw); + + if (rtlpci->acm_method != eAcmWay2_SW) + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_ACM_CTRL, + (u8 *)(&e_aci)); + break; + } + case HW_VAR_ACM_CTRL:{ + u8 e_aci = *((u8 *) val); + union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&( + mac->ac[0].aifs)); + u8 acm = p_aci_aifsn->f.acm; + u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl); + + acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? + 0x0 : 0x1); + + if (acm) { + switch (e_aci) { + case AC0_BE: + acm_ctrl |= AcmHw_BeqEn; + break; + case AC2_VI: + acm_ctrl |= AcmHw_ViqEn; + break; + case AC3_VO: + acm_ctrl |= AcmHw_VoqEn; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("HW_VAR_ACM_CTRL acm set " + "failed: eACI is %d\n", acm)); + break; + } + } else { + switch (e_aci) { + case AC0_BE: + acm_ctrl &= (~AcmHw_BeqEn); + break; + case AC2_VI: + acm_ctrl &= (~AcmHw_ViqEn); + break; + case AC3_VO: + acm_ctrl &= (~AcmHw_BeqEn); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + } + + RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE, + ("HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl)); + rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl); + break; + } + case HW_VAR_RCR:{ + rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]); + rtlpci->receive_config = ((u32 *) (val))[0]; + break; + } + case HW_VAR_RETRY_LIMIT:{ + u8 retry_limit = ((u8 *) (val))[0]; + + rtl_write_word(rtlpriv, RETRY_LIMIT, + retry_limit << RETRY_LIMIT_SHORT_SHIFT | + retry_limit << RETRY_LIMIT_LONG_SHIFT); + break; + } + case HW_VAR_DUAL_TSF_RST: { + break; + } + case HW_VAR_EFUSE_BYTES: { + rtlefuse->efuse_usedbytes = *((u16 *) val); + break; + } + case HW_VAR_EFUSE_USAGE: { + rtlefuse->efuse_usedpercentage = *((u8 *) val); + break; + } + case HW_VAR_IO_CMD: { + break; + } + case HW_VAR_WPA_CONFIG: { + rtl_write_byte(rtlpriv, REG_SECR, *((u8 *) val)); + break; + } + case HW_VAR_SET_RPWM:{ + break; + } + case HW_VAR_H2C_FW_PWRMODE:{ + break; + } + case HW_VAR_FW_PSMODE_STATUS: { + ppsc->fw_current_inpsmode = *((bool *) val); + break; + } + case HW_VAR_H2C_FW_JOINBSSRPT:{ + break; + } + case HW_VAR_AID:{ + break; + } + case HW_VAR_CORRECT_TSF:{ + break; + } + case HW_VAR_MRC: { + bool bmrc_toset = *((bool *)val); + u8 u1bdata = 0; + + if (bmrc_toset) { + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE0, 0x33); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM1_TRXPATHENABLE, + MASKBYTE0); + rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, + MASKBYTE0, + ((u1bdata & 0xf0) | 0x03)); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM0_TRXPATHENABLE, + MASKBYTE1); + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE1, + (u1bdata | 0x04)); + + /* Update current settings. */ + rtlpriv->dm.current_mrc_switch = bmrc_toset; + } else { + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE0, 0x13); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM1_TRXPATHENABLE, + MASKBYTE0); + rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, + MASKBYTE0, + ((u1bdata & 0xf0) | 0x01)); + u1bdata = (u8)rtl_get_bbreg(hw, + ROFDM0_TRXPATHENABLE, + MASKBYTE1); + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, + MASKBYTE1, (u1bdata & 0xfb)); + + /* Update current settings. */ + rtlpriv->dm.current_mrc_switch = bmrc_toset; + } + + break; + } + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + +} + +void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 sec_reg_value = 0x0; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("PairwiseEncAlgorithm = %d " + "GroupEncAlgorithm = %d\n", + rtlpriv->sec.pairwise_enc_algorithm, + rtlpriv->sec.group_enc_algorithm)); + + if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("not open hw encryption\n")); + return; + } + + sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE; + + if (rtlpriv->sec.use_defaultkey) { + sec_reg_value |= SCR_TXUSEDK; + sec_reg_value |= SCR_RXUSEDK; + } + + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, ("The SECR-value %x\n", + sec_reg_value)); + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); + +} + +static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 waitcount = 100; + bool bresult = false; + u8 tmpvalue; + + rtl_write_byte(rtlpriv, SYS_CLKR + 1, data); + + /* Wait the MAC synchronized. */ + udelay(400); + + /* Check if it is set ready. */ + tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + bresult = ((tmpvalue & BIT(7)) == (data & BIT(7))); + + if ((data & (BIT(6) | BIT(7))) == false) { + waitcount = 100; + tmpvalue = 0; + + while (1) { + waitcount--; + + tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + if ((tmpvalue & BIT(6))) + break; + + printk(KERN_ERR "wait for BIT(6) return value %x\n", + tmpvalue); + if (waitcount == 0) + break; + + udelay(10); + } + + if (waitcount == 0) + bresult = false; + else + bresult = true; + } + + return bresult; +} + +void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 u1tmp; + + /* The following config GPIO function */ + rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO)); + u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL); + + /* config GPIO3 to input */ + u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK; + rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp); + +} + +static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 u1tmp; + u8 retval = ERFON; + + /* The following config GPIO function */ + rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO)); + u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL); + + /* config GPIO3 to input */ + u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK; + rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp); + + /* On some of the platform, driver cannot read correct + * value without delay between Write_GPIO_SEL and Read_GPIO_IN */ + mdelay(10); + + /* check GPIO3 */ + u1tmp = rtl_read_byte(rtlpriv, GPIO_IN); + retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF; + + return retval; +} + +static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + u8 i; + u8 tmpu1b; + u16 tmpu2b; + u8 pollingcnt = 20; + + if (rtlpci->first_init) { + /* Reset PCIE Digital */ + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + tmpu1b &= 0xFE; + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b); + udelay(1); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0)); + } + + /* Switch to SW IO control */ + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + if (tmpu1b & BIT(7)) { + tmpu1b &= ~(BIT(6) | BIT(7)); + + /* Set failed, return to prevent hang. */ + if (!_rtl92ce_halset_sysclk(hw, tmpu1b)) + return; + } + + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0); + udelay(50); + rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34); + udelay(50); + + /* Clear FW RPWM for FW control LPS.*/ + rtl_write_byte(rtlpriv, RPWM, 0x0); + + /* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */ + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + tmpu1b &= 0x73; + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b); + /* wait for BIT 10/11/15 to pull high automatically!! */ + mdelay(1); + + rtl_write_byte(rtlpriv, CMDR, 0); + rtl_write_byte(rtlpriv, TCR, 0); + + /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */ + tmpu1b = rtl_read_byte(rtlpriv, 0x562); + tmpu1b |= 0x08; + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + tmpu1b &= ~(BIT(3)); + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + + /* Enable AFE clock source */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01)); + /* Delay 1.5ms */ + mdelay(2); + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb)); + + /* Enable AFE Macro Block's Bandgap */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0))); + mdelay(1); + + /* Enable AFE Mbias */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02)); + mdelay(1); + + /* Enable LDOA15 block */ + tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL); + rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0))); + + /* Set Digital Vdd to Retention isolation Path. */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL); + rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11))); + + /* For warm reboot NIC disappera bug. */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13))); + + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68); + + /* Enable AFE PLL Macro Block */ + /* We need to delay 100u before enabling PLL. */ + udelay(200); + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4))); + + /* for divider reset */ + udelay(100); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | + BIT(4) | BIT(6))); + udelay(10); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4))); + udelay(10); + + /* Enable MAC 80MHZ clock */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0))); + mdelay(1); + + /* Release isolation AFE PLL & MD */ + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6); + + /* Enable MAC clock */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11))); + + /* Enable Core digital and enable IOREG R/W */ + tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11))); + + tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7))); + + /* enable REG_EN */ + rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15))); + + /* Switch the control path. */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2)))); + + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6))); + if (!_rtl92ce_halset_sysclk(hw, tmpu1b)) + return; /* Set failed, return to prevent hang. */ + + rtl_write_word(rtlpriv, CMDR, 0x07FC); + + /* MH We must enable the section of code to prevent load IMEM fail. */ + /* Load MAC register from WMAc temporarily We simulate macreg. */ + /* txt HW will provide MAC txt later */ + rtl_write_byte(rtlpriv, 0x6, 0x30); + rtl_write_byte(rtlpriv, 0x49, 0xf0); + + rtl_write_byte(rtlpriv, 0x4b, 0x81); + + rtl_write_byte(rtlpriv, 0xb5, 0x21); + + rtl_write_byte(rtlpriv, 0xdc, 0xff); + rtl_write_byte(rtlpriv, 0xdd, 0xff); + rtl_write_byte(rtlpriv, 0xde, 0xff); + rtl_write_byte(rtlpriv, 0xdf, 0xff); + + rtl_write_byte(rtlpriv, 0x11a, 0x00); + rtl_write_byte(rtlpriv, 0x11b, 0x00); + + for (i = 0; i < 32; i++) + rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b); + + rtl_write_byte(rtlpriv, 0x236, 0xff); + + rtl_write_byte(rtlpriv, 0x503, 0x22); + + if (ppsc->support_aspm && !ppsc->support_backdoor) + rtl_write_byte(rtlpriv, 0x560, 0x40); + else + rtl_write_byte(rtlpriv, 0x560, 0x00); + + rtl_write_byte(rtlpriv, DBG_PORT, 0x91); + + /* Set RX Desc Address */ + rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma); + rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma); + + /* Set TX Desc Address */ + rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma); + rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma); + rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma); + rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma); + rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma); + rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma); + rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma); + rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma); + rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma); + + rtl_write_word(rtlpriv, CMDR, 0x37FC); + + /* To make sure that TxDMA can ready to download FW. */ + /* We should reset TxDMA if IMEM RPT was not ready. */ + do { + tmpu1b = rtl_read_byte(rtlpriv, TCR); + if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE) + break; + + udelay(5); + } while (pollingcnt--); + + if (pollingcnt <= 0) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Polling TXDMA_INIT_VALUE " + "timeout!! Current TCR(%#x)\n", tmpu1b)); + tmpu1b = rtl_read_byte(rtlpriv, CMDR); + rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN)); + udelay(2); + /* Reset TxDMA */ + rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN); + } + + /* After MACIO reset,we must refresh LED state. */ + if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) || + (ppsc->rfoff_reason == 0)) { + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); + enum rf_pwrstate rfpwr_state_toset; + rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw); + + if (rfpwr_state_toset == ERFON) + rtl92se_sw_led_on(hw, pLed0); + } +} + +static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u8 i; + u16 tmpu2b; + + /* 1. System Configure Register (Offset: 0x0000 - 0x003F) */ + + /* 2. Command Control Register (Offset: 0x0040 - 0x004F) */ + /* Turn on 0x40 Command register */ + rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN | + SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN | + RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN)); + + /* Set TCR TX DMA pre 2 FULL enable bit */ + rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) | + TXDMAPRE2FULL); + + /* Set RCR */ + rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config); + + /* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */ + + /* 4. Timing Control Register (Offset: 0x0080 - 0x009F) */ + /* Set CCK/OFDM SIFS */ + /* CCK SIFS shall always be 10us. */ + rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a); + rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010); + + /* Set AckTimeout */ + rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40); + + /* Beacon related */ + rtl_write_word(rtlpriv, BCN_INTERVAL, 100); + rtl_write_word(rtlpriv, ATIMWND, 2); + + /* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */ + /* 5.1 Initialize Number of Reserved Pages in Firmware Queue */ + /* Firmware allocate now, associate with FW internal setting.!!! */ + + /* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */ + /* 5.3 Set driver info, we only accept PHY status now. */ + /* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO */ + rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6)); + + /* 6. Adaptive Control Register (Offset: 0x0160 - 0x01CF) */ + /* Set RRSR to all legacy rate and HT rate + * CCK rate is supported by default. + * CCK rate will be filtered out only when associated + * AP does not support it. + * Only enable ACK rate to OFDM 24M + * Disable RRSR for CCK rate in A-Cut */ + + if (rtlhal->version == VERSION_8192S_ACUT) + rtl_write_byte(rtlpriv, RRSR, 0xf0); + else if (rtlhal->version == VERSION_8192S_BCUT) + rtl_write_byte(rtlpriv, RRSR, 0xff); + rtl_write_byte(rtlpriv, RRSR + 1, 0x01); + rtl_write_byte(rtlpriv, RRSR + 2, 0x00); + + /* A-Cut IC do not support CCK rate. We forbid ARFR to */ + /* fallback to CCK rate */ + for (i = 0; i < 8; i++) { + /*Disable RRSR for CCK rate in A-Cut */ + if (rtlhal->version == VERSION_8192S_ACUT) + rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0); + } + + /* Different rate use different AMPDU size */ + /* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */ + rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f); + /* MCS0/1/2/3 use max AMPDU size 4*2=8K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442); + /* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7); + /* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772); + /* MCS12/13/14/15 use max AMPDU size 15*2=30K */ + rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd); + + /* Set Data / Response auto rate fallack retry count */ + rtl_write_dword(rtlpriv, DARFRC, 0x04010000); + rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605); + rtl_write_dword(rtlpriv, RARFRC, 0x04010000); + rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605); + + /* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */ + /* Set all rate to support SG */ + rtl_write_word(rtlpriv, SG_RATE, 0xFFFF); + + /* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */ + /* Set NAV protection length */ + rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080); + /* CF-END Threshold */ + rtl_write_byte(rtlpriv, CFEND_TH, 0xFF); + /* Set AMPDU minimum space */ + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07); + /* Set TXOP stall control for several queue/HI/BCN/MGT/ */ + rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00); + + /* 9. Security Control Register (Offset: 0x0240 - 0x025F) */ + /* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */ + /* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */ + /* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */ + /* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */ + + /* 14. Set driver info, we only accept PHY status now. */ + rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4); + + /* 15. For EEPROM R/W Workaround */ + /* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */ + tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13)); + tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL); + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8))); + + /* 17. For EFUSE */ + /* We may R/W EFUSE in EEPROM mode */ + if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { + u8 tempval; + + tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1); + tempval &= 0xFE; + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval); + + /* Change Program timing */ + rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72); + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("EFUSE CONFIG OK\n")); + } + + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("OK\n")); + +} + +static void _rtl92se_hw_configure(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + + u8 reg_bw_opmode = 0; + u32 reg_ratr = 0, reg_rrsr = 0; + u8 regtmp = 0; + + reg_bw_opmode = BW_OPMODE_20MHZ; + reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | + RATE_ALL_OFDM_2SS; + reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; + + regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL); + reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp; + rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr); + rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode); + + /* Set Retry Limit here */ + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT, + (u8 *)(&rtlpci->shortretry_limit)); + + rtl_write_byte(rtlpriv, MLT, 0x8f); + + /* For Min Spacing configuration. */ + switch (rtlphy->rf_type) { + case RF_1T2R: + case RF_1T1R: + rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); + break; + case RF_2T2R: + case RF_2T2R_GREEN: + rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); + break; + } + rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg); +} + +int rtl92se_hw_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 tmp_byte = 0; + + bool rtstatus = true; + u8 tmp_u1b; + int err = false; + u8 i; + int wdcapra_add[] = { + EDCAPARA_BE, EDCAPARA_BK, + EDCAPARA_VI, EDCAPARA_VO}; + u8 secr_value = 0x0; + + rtlpci->being_init_adapter = true; + + rtlpriv->intf_ops->disable_aspm(hw); + + /* 1. MAC Initialize */ + /* Before FW download, we have to set some MAC register */ + _rtl92se_macconfig_before_fwdownload(hw); + + rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv, + PMC_FSM) >> 16) & 0xF); + + rtl8192se_gpiobit3_cfg_inputmode(hw); + + /* 2. download firmware */ + rtstatus = rtl92s_download_fw(hw); + if (!rtstatus) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("Failed to download FW. " + "Init HW without FW now.., Please copy FW into" + "/lib/firmware/rtlwifi\n")); + rtlhal->fw_ready = false; + } else { + rtlhal->fw_ready = true; + } + + /* After FW download, we have to reset MAC register */ + _rtl92se_macconfig_after_fwdownload(hw); + + /*Retrieve default FW Cmd IO map. */ + rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, LBUS_MON_ADDR); + rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK); + + /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */ + if (rtl92s_phy_mac_config(hw) != true) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("MAC Config failed\n")); + return rtstatus; + } + + /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */ + /* We must set flag avoid BB/RF config period later!! */ + rtl_write_dword(rtlpriv, CMDR, 0x37FC); + + /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */ + if (rtl92s_phy_bb_config(hw) != true) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("BB Config failed\n")); + return rtstatus; + } + + /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */ + /* Before initalizing RF. We can not use FW to do RF-R/W. */ + + rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; + + /* RF Power Save */ +#if 0 + /* H/W or S/W RF OFF before sleep. */ + if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) { + u32 rfoffreason = rtlpriv->psc.rfoff_reason; + + rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT; + rtlpriv->psc.rfpwr_state = ERFON; + rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason, true); + } else { + /* gpio radio on/off is out of adapter start */ + if (rtlpriv->psc.hwradiooff == false) { + rtlpriv->psc.rfpwr_state = ERFON; + rtlpriv->psc.rfoff_reason = 0; + } + } +#endif + + /* Before RF-R/W we must execute the IO from Scott's suggestion. */ + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB); + if (rtlhal->version == VERSION_8192S_ACUT) + rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07); + else + rtl_write_byte(rtlpriv, RF_CTRL, 0x07); + + if (rtl92s_phy_rf_config(hw) != true) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("RF Config failed\n")); + return rtstatus; + } + + /* After read predefined TXT, we must set BB/MAC/RF + * register as our requirement */ + + rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw, + (enum radio_path)0, + RF_CHNLBW, + RFREG_OFFSET_MASK); + rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw, + (enum radio_path)1, + RF_CHNLBW, + RFREG_OFFSET_MASK); + + /*---- Set CCK and OFDM Block "ON"----*/ + rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); + rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); + + /*3 Set Hardware(Do nothing now) */ + _rtl92se_hw_configure(hw); + + /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ + /* TX power index for different rate set. */ + /* Get original hw reg values */ + rtl92s_phy_get_hw_reg_originalvalue(hw); + /* Write correct tx power index */ + rtl92s_phy_set_txpower(hw, rtlphy->current_channel); + + /* We must set MAC address after firmware download. */ + for (i = 0; i < 6; i++) + rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]); + + /* EEPROM R/W workaround */ + tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG); + rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3))); + + rtl_write_byte(rtlpriv, 0x4d, 0x0); + + if (hal_get_firmwareversion(rtlpriv) >= 0x49) { + tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4)); + tmp_byte = tmp_byte | BIT(5); + rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte); + rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF); + } + + /* We enable high power and RA related mechanism after NIC + * initialized. */ + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT); + + /* Add to prevent ASPM bug. */ + /* Always enable hst and NIC clock request. */ + rtl92s_phy_switch_ephy_parameter(hw); + + /* Security related + * 1. Clear all H/W keys. + * 2. Enable H/W encryption/decryption. */ + rtl_cam_reset_all_entry(hw); + secr_value |= SCR_TXENCENABLE; + secr_value |= SCR_RXENCENABLE; + secr_value |= SCR_NOSKMC; + rtl_write_byte(rtlpriv, REG_SECR, secr_value); + + for (i = 0; i < 4; i++) + rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322); + + if (rtlphy->rf_type == RF_1T2R) { + bool mrc2set = true; + /* Turn on B-Path */ + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set); + } + + rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON); + rtl92s_dm_init(hw); + rtlpci->being_init_adapter = false; + + return err; +} + +void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr) +{ +} + +void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u32 reg_rcr = rtlpci->receive_config; + + if (rtlpriv->psc.rfpwr_state != ERFON) + return; + + if (check_bssid == true) { + reg_rcr |= (RCR_CBSSID); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + } else if (check_bssid == false) { + reg_rcr &= (~RCR_CBSSID); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + } + +} + +static int _rtl92se_set_media_status(struct ieee80211_hw *hw, + enum nl80211_iftype type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 bt_msr = rtl_read_byte(rtlpriv, MSR); + enum led_ctl_mode ledaction = LED_CTL_NO_LINK; + u32 temp; + bt_msr &= ~MSR_LINK_MASK; + + switch (type) { + case NL80211_IFTYPE_UNSPECIFIED: + bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT); + ledaction = LED_CTL_LINK; + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to NO LINK!\n")); + break; + case NL80211_IFTYPE_ADHOC: + bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to Ad Hoc!\n")); + break; + case NL80211_IFTYPE_STATION: + bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT); + ledaction = LED_CTL_LINK; + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to STA!\n")); + break; + case NL80211_IFTYPE_AP: + bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to AP!\n")); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Network type %d not support!\n", type)); + return 1; + break; + + } + + rtl_write_byte(rtlpriv, (MSR), bt_msr); + + temp = rtl_read_dword(rtlpriv, TCR); + rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8))); + rtl_write_dword(rtlpriv, TCR, temp | BIT(8)); + + + return 0; +} + +/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */ +int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (_rtl92se_set_media_status(hw, type)) + return -EOPNOTSUPP; + + if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { + if (type != NL80211_IFTYPE_AP) + rtl92se_set_check_bssid(hw, true); + } else { + rtl92se_set_check_bssid(hw, false); + } + + return 0; +} + +/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */ +void rtl92se_set_qos(struct ieee80211_hw *hw, int aci) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + rtl92s_dm_init_edca_turbo(hw); + + switch (aci) { + case AC1_BK: + rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f); + break; + case AC0_BE: + /* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */ + break; + case AC2_VI: + rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322); + break; + case AC3_VO: + rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222); + break; + default: + RT_ASSERT(false, ("invalid aci: %d !\n", aci)); + break; + } +} + +void rtl92se_enable_interrupt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]); + /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */ + rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F); + + rtlpci->irq_enabled = true; +} + +void rtl92se_disable_interrupt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtl_write_dword(rtlpriv, INTA_MASK, 0); + rtl_write_dword(rtlpriv, INTA_MASK + 4, 0); + + rtlpci->irq_enabled = false; +} + + +static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 waitcnt = 100; + bool result = false; + u8 tmp; + + rtl_write_byte(rtlpriv, SYS_CLKR + 1, data); + + /* Wait the MAC synchronized. */ + udelay(400); + + /* Check if it is set ready. */ + tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + result = ((tmp & BIT(7)) == (data & BIT(7))); + + if ((data & (BIT(6) | BIT(7))) == false) { + waitcnt = 100; + tmp = 0; + + while (1) { + waitcnt--; + tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1); + + if ((tmp & BIT(6))) + break; + + printk(KERN_ERR "wait for BIT(6) return value %x\n", + tmp); + + if (waitcnt == 0) + break; + udelay(10); + } + + if (waitcnt == 0) + result = false; + else + result = true; + } + + return result; +} + +static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + u8 u1btmp; + + if (rtlhal->driver_going2unload) + rtl_write_byte(rtlpriv, 0x560, 0x0); + + /* Power save for BB/RF */ + u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL); + u1btmp |= BIT(0); + rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp); + rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0); + rtl_write_byte(rtlpriv, TXPAUSE, 0xFF); + rtl_write_word(rtlpriv, CMDR, 0x57FC); + udelay(100); + rtl_write_word(rtlpriv, CMDR, 0x77FC); + rtl_write_byte(rtlpriv, PHY_CCA, 0x0); + udelay(10); + rtl_write_word(rtlpriv, CMDR, 0x37FC); + udelay(10); + rtl_write_word(rtlpriv, CMDR, 0x77FC); + udelay(10); + rtl_write_word(rtlpriv, CMDR, 0x57FC); + rtl_write_word(rtlpriv, CMDR, 0x0000); + + if (rtlhal->driver_going2unload) { + u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1)); + u1btmp &= ~(BIT(0)); + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp); + } + + u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + + /* Add description. After switch control path. register + * after page1 will be invisible. We can not do any IO + * for register>0x40. After resume&MACIO reset, we need + * to remember previous reg content. */ + if (u1btmp & BIT(7)) { + u1btmp &= ~(BIT(6) | BIT(7)); + if (!_rtl92s_set_sysclk(hw, u1btmp)) { + printk(KERN_ERR "Switch ctrl path fail\n"); + return; + } + } + + /* Power save for MAC */ + if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS && + !rtlhal->driver_going2unload) { + /* enable LED function */ + rtl_write_byte(rtlpriv, 0x03, 0xF9); + /* SW/HW radio off or halt adapter!! For example S3/S4 */ + } else { + /* LED function disable. Power range is about 8mA now. */ + /* if write 0xF1 disconnet_pci power + * ifconfig wlan0 down power are both high 35:70 */ + /* if write oxF9 disconnet_pci power + * ifconfig wlan0 down power are both low 12:45*/ + rtl_write_byte(rtlpriv, 0x03, 0xF9); + } + + rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x00); + rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E); + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + +} + +static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); + + if (rtlpci->up_first_time == 1) + return; + + if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS) + rtl92se_sw_led_on(hw, pLed0); + else + rtl92se_sw_led_off(hw, pLed0); +} + + +static void _rtl92se_power_domain_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u16 tmpu2b; + u8 tmpu1b; + + rtlpriv->psc.pwrdomain_protect = true; + + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + if (tmpu1b & BIT(7)) { + tmpu1b &= ~(BIT(6) | BIT(7)); + if (!_rtl92s_set_sysclk(hw, tmpu1b)) { + rtlpriv->psc.pwrdomain_protect = false; + return; + } + } + + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0); + rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34); + + /* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */ + tmpu1b = rtl_read_byte(rtlpriv, SYS_FUNC_EN + 1); + + /* If IPS we need to turn LED on. So we not + * not disable BIT 3/7 of reg3. */ + if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW)) + tmpu1b &= 0xFB; + else + tmpu1b &= 0x73; + + rtl_write_byte(rtlpriv, SYS_FUNC_EN + 1, tmpu1b); + /* wait for BIT 10/11/15 to pull high automatically!! */ + mdelay(1); + + rtl_write_byte(rtlpriv, CMDR, 0); + rtl_write_byte(rtlpriv, TCR, 0); + + /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */ + tmpu1b = rtl_read_byte(rtlpriv, 0x562); + tmpu1b |= 0x08; + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + tmpu1b &= ~(BIT(3)); + rtl_write_byte(rtlpriv, 0x562, tmpu1b); + + /* Enable AFE clock source */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01)); + /* Delay 1.5ms */ + udelay(1500); + tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb)); + + /* Enable AFE Macro Block's Bandgap */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0))); + mdelay(1); + + /* Enable AFE Mbias */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC); + rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02)); + mdelay(1); + + /* Enable LDOA15 block */ + tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL); + rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0))); + + /* Set Digital Vdd to Retention isolation Path. */ + tmpu2b = rtl_read_word(rtlpriv, SYS_ISO_CTRL); + rtl_write_word(rtlpriv, SYS_ISO_CTRL, (tmpu2b | BIT(11))); + + + /* For warm reboot NIC disappera bug. */ + tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN); + rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(13))); + + rtl_write_byte(rtlpriv, SYS_ISO_CTRL + 1, 0x68); + + /* Enable AFE PLL Macro Block */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4))); + /* Enable MAC 80MHZ clock */ + tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1); + rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0))); + mdelay(1); + + /* Release isolation AFE PLL & MD */ + rtl_write_byte(rtlpriv, SYS_ISO_CTRL, 0xA6); + + /* Enable MAC clock */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11))); + + /* Enable Core digital and enable IOREG R/W */ + tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN); + rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11))); + /* enable REG_EN */ + rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15))); + + /* Switch the control path. */ + tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR); + rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2)))); + + tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); + tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6))); + if (!_rtl92s_set_sysclk(hw, tmpu1b)) { + rtlpriv->psc.pwrdomain_protect = false; + return; + } + + rtl_write_word(rtlpriv, CMDR, 0x37FC); + + /* After MACIO reset,we must refresh LED state. */ + _rtl92se_gen_refreshledstate(hw); + + rtlpriv->psc.pwrdomain_protect = false; +} + +void rtl92se_card_disable(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + enum nl80211_iftype opmode; + u8 wait = 30; + + rtlpriv->intf_ops->enable_aspm(hw); + + if (rtlpci->driver_is_goingto_unload || + ppsc->rfoff_reason > RF_CHANGE_BY_PS) + rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); + + /* we should chnge GPIO to input mode + * this will drop away current about 25mA*/ + rtl8192se_gpiobit3_cfg_inputmode(hw); + + /* this is very important for ips power save */ + while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) { + if (rtlpriv->psc.pwrdomain_protect) + mdelay(20); + else + break; + } + + mac->link_state = MAC80211_NOLINK; + opmode = NL80211_IFTYPE_UNSPECIFIED; + _rtl92se_set_media_status(hw, opmode); + + _rtl92s_phy_set_rfhalt(hw); + udelay(100); +} + +void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta, + u32 *p_intb) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; + rtl_write_dword(rtlpriv, ISR, *p_inta); + + *p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1]; + rtl_write_dword(rtlpriv, ISR + 4, *p_intb); +} + +void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 bcntime_cfg = 0; + u16 bcn_cw = 6, bcn_ifs = 0xf; + u16 atim_window = 2; + + /* ATIM Window (in unit of TU). */ + rtl_write_word(rtlpriv, ATIMWND, atim_window); + + /* Beacon interval (in unit of TU). */ + rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval); + + /* DrvErlyInt (in unit of TU). (Time to send + * interrupt to notify driver to change + * beacon content) */ + rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4); + + /* BcnDMATIM(in unit of us). Indicates the + * time before TBTT to perform beacon queue DMA */ + rtl_write_word(rtlpriv, BCN_DMATIME, 256); + + /* Force beacon frame transmission even + * after receiving beacon frame from + * other ad hoc STA */ + rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100); + + /* Beacon Time Configuration */ + if (mac->opmode == NL80211_IFTYPE_ADHOC) + bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT); + + /* TODO: bcn_ifs may required to be changed on ASIC */ + bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS; + + /*for beacon changed */ + rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval); +} + +void rtl92se_set_beacon_interval(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 bcn_interval = mac->beacon_interval; + + /* Beacon interval (in unit of TU). */ + rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval); + /* 2008.10.24 added by tynli for beacon changed. */ + rtl92s_phy_set_beacon_hwreg(hw, bcn_interval); +} + +void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw, + u32 add_msr, u32 rm_msr) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, + ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr)); + + if (add_msr) + rtlpci->irq_mask[0] |= add_msr; + + if (rm_msr) + rtlpci->irq_mask[0] &= (~rm_msr); + + rtl92se_disable_interrupt(hw); + rtl92se_enable_interrupt(hw); +} + +static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw) +{ + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u8 efuse_id; + + rtlhal->ic_class = IC_INFERIORITY_A; + + /* Only retrieving while using EFUSE. */ + if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) && + !rtlefuse->autoload_failflag) { + efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET); + + if (efuse_id == 0xfe) + rtlhal->ic_class = IC_INFERIORITY_B; + } +} + +static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u16 i, usvalue; + u16 eeprom_id; + u8 tempval; + u8 hwinfo[HWSET_MAX_SIZE_92S]; + u8 rf_path, index; + + if (rtlefuse->epromtype == EEPROM_93C46) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("RTL819X Not boot from eeprom, check it !!")); + } else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { + rtl_efuse_shadow_map_update(hw); + + memcpy((void *)hwinfo, (void *) + &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], + HWSET_MAX_SIZE_92S); + } + + RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"), + hwinfo, HWSET_MAX_SIZE_92S); + + eeprom_id = *((u16 *)&hwinfo[0]); + if (eeprom_id != RTL8190_EEPROM_ID) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("EEPROM ID(%#x) is invalid!!\n", eeprom_id)); + rtlefuse->autoload_failflag = true; + } else { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n")); + rtlefuse->autoload_failflag = false; + } + + if (rtlefuse->autoload_failflag == true) + return; + + _rtl8192se_get_IC_Inferiority(hw); + + /* Read IC Version && Channel Plan */ + /* VID, DID SE 0xA-D */ + rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID]; + rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID]; + rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID]; + rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID]; + rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION]; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROMId = 0x%4x\n", eeprom_id)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid)); + + for (i = 0; i < 6; i += 2) { + usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i]; + *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; + } + + for (i = 0; i < 6; i++) + rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]); + + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, + (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr))); + + /* Get Tx Power Level by Channel */ + /* Read Tx power of Channel 1 ~ 14 from EEPROM. */ + /* 92S suupport RF A & B */ + for (rf_path = 0; rf_path < 2; rf_path++) { + for (i = 0; i < 3; i++) { + /* Read CCK RF A & B Tx power */ + rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] = + hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i]; + + /* Read OFDM RF A & B Tx power for 1T */ + rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] = + hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i]; + + /* Read OFDM RF A & B Tx power for 2T */ + rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][i] + = hwinfo[EEPROM_TXPOWERBASE + 12 + + rf_path * 3 + i]; + } + } + + for (rf_path = 0; rf_path < 2; rf_path++) + for (i = 0; i < 3; i++) + RTPRINT(rtlpriv, FINIT, INIT_EEPROM, + ("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path, + i, rtlefuse->eeprom_chnlarea_txpwr_cck + [rf_path][i])); + for (rf_path = 0; rf_path < 2; rf_path++) + for (i = 0; i < 3; i++) + RTPRINT(rtlpriv, FINIT, INIT_EEPROM, + ("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n", + rf_path, i, + rtlefuse->eeprom_chnlarea_txpwr_ht40_1s + [rf_path][i])); + for (rf_path = 0; rf_path < 2; rf_path++) + for (i = 0; i < 3; i++) + RTPRINT(rtlpriv, FINIT, INIT_EEPROM, + ("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n", + rf_path, i, + rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif + [rf_path][i])); + + for (rf_path = 0; rf_path < 2; rf_path++) { + + /* Assign dedicated channel tx power */ + for (i = 0; i < 14; i++) { + /* channel 1~3 use the same Tx Power Level. */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 1; + /* Channel 9-14 */ + else + index = 2; + + /* Record A & B CCK /OFDM - 1T/2T Channel area + * tx power */ + rtlefuse->txpwrlevel_cck[rf_path][i] = + rtlefuse->eeprom_chnlarea_txpwr_cck + [rf_path][index]; + rtlefuse->txpwrlevel_ht40_1s[rf_path][i] = + rtlefuse->eeprom_chnlarea_txpwr_ht40_1s + [rf_path][index]; + rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = + rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif + [rf_path][index]; + } + + for (i = 0; i < 14; i++) { + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = " + "[0x%x / 0x%x / 0x%x]\n", rf_path, i, + rtlefuse->txpwrlevel_cck[rf_path][i], + rtlefuse->txpwrlevel_ht40_1s[rf_path][i], + rtlefuse->txpwrlevel_ht40_2s[rf_path][i])); + } + } + + for (rf_path = 0; rf_path < 2; rf_path++) { + for (i = 0; i < 3; i++) { + /* Read Power diff limit. */ + rtlefuse->eeprom_pwrgroup[rf_path][i] = + hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i]; + } + } + + for (rf_path = 0; rf_path < 2; rf_path++) { + /* Fill Pwr group */ + for (i = 0; i < 14; i++) { + /* Chanel 1-3 */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 1; + /* Channel 9-13 */ + else + index = 2; + + rtlefuse->pwrgroup_ht20[rf_path][i] = + (rtlefuse->eeprom_pwrgroup[rf_path][index] & + 0xf); + rtlefuse->pwrgroup_ht40[rf_path][i] = + ((rtlefuse->eeprom_pwrgroup[rf_path][index] & + 0xf0) >> 4); + + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF-%d pwrgroup_ht20[%d] = 0x%x\n", + rf_path, i, + rtlefuse->pwrgroup_ht20[rf_path][i])); + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF-%d pwrgroup_ht40[%d] = 0x%x\n", + rf_path, i, + rtlefuse->pwrgroup_ht40[rf_path][i])); + } + } + + for (i = 0; i < 14; i++) { + /* Read tx power difference between HT OFDM 20/40 MHZ */ + /* channel 1-3 */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 1; + /* Channel 9-14 */ + else + index = 2; + + tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_HT20_DIFF + + index]) & 0xff; + rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF); + rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] = + ((tempval >> 4) & 0xF); + + /* Read OFDM<->HT tx power diff */ + /* Channel 1-3 */ + if (i < 3) + index = 0; + /* Channel 4-8 */ + else if (i < 8) + index = 0x11; + /* Channel 9-14 */ + else + index = 1; + + tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index]) + & 0xff; + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] = + (tempval & 0xF); + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] = + ((tempval >> 4) & 0xF); + + tempval = (*(u8 *)&hwinfo[TX_PWR_SAFETY_CHK]); + rtlefuse->txpwr_safetyflag = (tempval & 0x01); + } + + rtlefuse->eeprom_regulatory = 0; + if (rtlefuse->eeprom_version >= 2) { + /* BIT(0)~2 */ + if (rtlefuse->eeprom_version >= 4) + rtlefuse->eeprom_regulatory = + (hwinfo[EEPROM_REGULATORY] & 0x7); + else /* BIT(0) */ + rtlefuse->eeprom_regulatory = + (hwinfo[EEPROM_REGULATORY] & 0x1); + } + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory)); + + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i, + rtlefuse->txpwr_ht20diff[RF90_PATH_A][i])); + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i, + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i])); + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i, + rtlefuse->txpwr_ht20diff[RF90_PATH_B][i])); + for (i = 0; i < 14; i++) + RTPRINT(rtlpriv, FINIT, INIT_TxPower, + ("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i, + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i])); + + RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPwrSafetyFlag = %d\n", + rtlefuse->txpwr_safetyflag)); + + /* Read RF-indication and Tx Power gain + * index diff of legacy to HT OFDM rate. */ + tempval = (*(u8 *)&hwinfo[EEPROM_RFIND_POWERDIFF]) & 0xff; + rtlefuse->eeprom_txpowerdiff = tempval; + rtlefuse->legacy_httxpowerdiff = + rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0]; + + RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPowerDiff = %#x\n", + rtlefuse->eeprom_txpowerdiff)); + + /* Get TSSI value for each path. */ + usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A]; + rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8); + usvalue = *(u8 *)&hwinfo[EEPROM_TSSI_B]; + rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff); + + RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TSSI_A = 0x%x, TSSI_B = 0x%x\n", + rtlefuse->eeprom_tssi[RF90_PATH_A], + rtlefuse->eeprom_tssi[RF90_PATH_B])); + + /* Read antenna tx power offset of B/C/D to A from EEPROM */ + /* and read ThermalMeter from EEPROM */ + tempval = *(u8 *)&hwinfo[EEPROM_THERMALMETER]; + rtlefuse->eeprom_thermalmeter = tempval; + RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("thermalmeter = 0x%x\n", + rtlefuse->eeprom_thermalmeter)); + + /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */ + rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f); + rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100; + + /* Read CrystalCap from EEPROM */ + tempval = (*(u8 *)&hwinfo[EEPROM_CRYSTALCAP]) >> 4; + rtlefuse->eeprom_crystalcap = tempval; + /* CrystalCap, BIT(12)~15 */ + rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap; + + /* Read IC Version && Channel Plan */ + /* Version ID, Channel plan */ + rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN]; + rtlefuse->txpwr_fromeprom = true; + RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("EEPROM ChannelPlan = 0x%4x\n", + rtlefuse->eeprom_channelplan)); + + /* Read Customer ID or Board Type!!! */ + tempval = *(u8 *)&hwinfo[EEPROM_BOARDTYPE]; + /* Change RF type definition */ + if (tempval == 0) + rtlphy->rf_type = RF_2T2R; + else if (tempval == 1) + rtlphy->rf_type = RF_1T2R; + else if (tempval == 2) + rtlphy->rf_type = RF_1T2R; + else if (tempval == 3) + rtlphy->rf_type = RF_1T1R; + + /* 1T2R but 1SS (1x1 receive combining) */ + rtlefuse->b1x1_recvcombine = false; + if (rtlphy->rf_type == RF_1T2R) { + tempval = rtl_read_byte(rtlpriv, 0x07); + if (!(tempval & BIT(0))) { + rtlefuse->b1x1_recvcombine = true; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("RF_TYPE=1T2R but only 1SS\n")); + } + } + rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine; + rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMID]; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("EEPROM Customer ID: 0x%2x", + rtlefuse->eeprom_oemid)); + + /* set channel paln to world wide 13 */ + rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13; +} + +void rtl92se_read_eeprom_info(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 tmp_u1b = 0; + + tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD); + + if (tmp_u1b & BIT(4)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n")); + rtlefuse->epromtype = EEPROM_93C46; + } else { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n")); + rtlefuse->epromtype = EEPROM_BOOT_EFUSE; + } + + if (tmp_u1b & BIT(5)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n")); + rtlefuse->autoload_failflag = false; + _rtl92se_read_adapter_info(hw); + } else { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n")); + rtlefuse->autoload_failflag = true; + } +} + +static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u32 ratr_value; + u8 ratr_index = 0; + u8 nmode = mac->ht_enable; + u8 mimo_ps = IEEE80211_SMPS_OFF; + u16 shortgi_rate = 0; + u32 tmp_ratr_value = 0; + u8 curtxbw_40mhz = mac->bw_40; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = mac->mode; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_value = sta->supp_rates[1] << 4; + else + ratr_value = sta->supp_rates[0]; + ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); + switch (wirelessmode) { + case WIRELESS_MODE_B: + ratr_value &= 0x0000000D; + break; + case WIRELESS_MODE_G: + ratr_value &= 0x00000FF5; + break; + case WIRELESS_MODE_N_24G: + case WIRELESS_MODE_N_5G: + nmode = 1; + if (mimo_ps == IEEE80211_SMPS_STATIC) { + ratr_value &= 0x0007F005; + } else { + u32 ratr_mask; + + if (get_rf_type(rtlphy) == RF_1T2R || + get_rf_type(rtlphy) == RF_1T1R) { + if (curtxbw_40mhz) + ratr_mask = 0x000ff015; + else + ratr_mask = 0x000ff005; + } else { + if (curtxbw_40mhz) + ratr_mask = 0x0f0ff015; + else + ratr_mask = 0x0f0ff005; + } + + ratr_value &= ratr_mask; + } + break; + default: + if (rtlphy->rf_type == RF_1T2R) + ratr_value &= 0x000ff0ff; + else + ratr_value &= 0x0f0ff0ff; + + break; + } + + if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT) + ratr_value &= 0x0FFFFFFF; + else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT) + ratr_value &= 0x0FFFFFF0; + + if (nmode && ((curtxbw_40mhz && + curshortgi_40mhz) || (!curtxbw_40mhz && + curshortgi_20mhz))) { + + ratr_value |= 0x10000000; + tmp_ratr_value = (ratr_value >> 12); + + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { + if ((1 << shortgi_rate) & tmp_ratr_value) + break; + } + + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | + (shortgi_rate << 4) | (shortgi_rate); + + rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate); + } + + rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value); + if (ratr_value & 0xfffff000) + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N); + else + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, + ("%x\n", rtl_read_dword(rtlpriv, ARFR0))); +} + +static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_sta_info *sta_entry = NULL; + u32 ratr_bitmap; + u8 ratr_index = 0; + u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) + ? 1 : 0; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = 0; + bool shortgi = false; + u32 ratr_value = 0; + u8 shortgi_rate = 0; + u32 mask = 0; + u32 band = 0; + bool bmulticast = false; + u8 macid = 0; + u8 mimo_ps = IEEE80211_SMPS_OFF; + + sta_entry = (struct rtl_sta_info *) sta->drv_priv; + wirelessmode = sta_entry->wireless_mode; + if (mac->opmode == NL80211_IFTYPE_STATION) + curtxbw_40mhz = mac->bw_40; + else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) + macid = sta->aid + 1; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_bitmap = sta->supp_rates[1] << 4; + else + ratr_bitmap = sta->supp_rates[0]; + ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); + switch (wirelessmode) { + case WIRELESS_MODE_B: + band |= WIRELESS_11B; + ratr_index = RATR_INX_WIRELESS_B; + if (ratr_bitmap & 0x0000000c) + ratr_bitmap &= 0x0000000d; + else + ratr_bitmap &= 0x0000000f; + break; + case WIRELESS_MODE_G: + band |= (WIRELESS_11G | WIRELESS_11B); + ratr_index = RATR_INX_WIRELESS_GB; + + if (rssi_level == 1) + ratr_bitmap &= 0x00000f00; + else if (rssi_level == 2) + ratr_bitmap &= 0x00000ff0; + else + ratr_bitmap &= 0x00000ff5; + break; + case WIRELESS_MODE_A: + band |= WIRELESS_11A; + ratr_index = RATR_INX_WIRELESS_A; + ratr_bitmap &= 0x00000ff0; + break; + case WIRELESS_MODE_N_24G: + case WIRELESS_MODE_N_5G: + band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B); + ratr_index = RATR_INX_WIRELESS_NGB; + + if (mimo_ps == IEEE80211_SMPS_STATIC) { + if (rssi_level == 1) + ratr_bitmap &= 0x00070000; + else if (rssi_level == 2) + ratr_bitmap &= 0x0007f000; + else + ratr_bitmap &= 0x0007f005; + } else { + if (rtlphy->rf_type == RF_1T2R || + rtlphy->rf_type == RF_1T1R) { + if (rssi_level == 1) { + ratr_bitmap &= 0x000f0000; + } else if (rssi_level == 3) { + ratr_bitmap &= 0x000fc000; + } else if (rssi_level == 5) { + ratr_bitmap &= 0x000ff000; + } else { + if (curtxbw_40mhz) + ratr_bitmap &= 0x000ff015; + else + ratr_bitmap &= 0x000ff005; + } + } else { + if (rssi_level == 1) { + ratr_bitmap &= 0x0f8f0000; + } else if (rssi_level == 3) { + ratr_bitmap &= 0x0f8fc000; + } else if (rssi_level == 5) { + ratr_bitmap &= 0x0f8ff000; + } else { + if (curtxbw_40mhz) + ratr_bitmap &= 0x0f8ff015; + else + ratr_bitmap &= 0x0f8ff005; + } + } + } + + if ((curtxbw_40mhz && curshortgi_40mhz) || + (!curtxbw_40mhz && curshortgi_20mhz)) { + if (macid == 0) + shortgi = true; + else if (macid == 1) + shortgi = false; + } + break; + default: + band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B); + ratr_index = RATR_INX_WIRELESS_NGB; + + if (rtlphy->rf_type == RF_1T2R) + ratr_bitmap &= 0x000ff0ff; + else + ratr_bitmap &= 0x0f8ff0ff; + break; + } + + if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT) + ratr_bitmap &= 0x0FFFFFFF; + else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT) + ratr_bitmap &= 0x0FFFFFF0; + + if (shortgi) { + ratr_bitmap |= 0x10000000; + /* Get MAX MCS available. */ + ratr_value = (ratr_bitmap >> 12); + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { + if ((1 << shortgi_rate) & ratr_value) + break; + } + + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | + (shortgi_rate << 4) | (shortgi_rate); + rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate); + } + + mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, ("mask = %x, bitmap = %x\n", + mask, ratr_bitmap)); + rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap); + rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8))); + + if (macid != 0) + sta_entry->ratr_index = ratr_index; +} + +void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->dm.useramask) + rtl92se_update_hal_rate_mask(hw, sta, rssi_level); + else + rtl92se_update_hal_rate_table(hw, sta); +} + +void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 sifs_timer; + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, + (u8 *)&mac->slot_time); + sifs_timer = 0x0e0e; + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); + +} + +/* this ifunction is for RFKILL, it's different with windows, + * because UI will disable wireless when GPIO Radio Off. + * And here we not check or Disable/Enable ASPM like windows*/ +bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + enum rf_pwrstate rfpwr_toset, cur_rfstate; + unsigned long flag = 0; + bool actuallyset = false; + bool turnonbypowerdomain = false; + + /* just 8191se can check gpio before firstup, 92c/92d have fixed it */ + if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter)) + return false; + + if (ppsc->swrf_processing) + return false; + + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + if (ppsc->rfchange_inprogress) { + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + return false; + } else { + ppsc->rfchange_inprogress = true; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } + + cur_rfstate = ppsc->rfpwr_state; + + /* because after _rtl92s_phy_set_rfhalt, all power + * closed, so we must open some power for GPIO check, + * or we will always check GPIO RFOFF here, + * And we should close power after GPIO check */ + if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) { + _rtl92se_power_domain_init(hw); + turnonbypowerdomain = true; + } + + rfpwr_toset = _rtl92se_rf_onoff_detect(hw); + + if ((ppsc->hwradiooff == true) && (rfpwr_toset == ERFON)) { + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + ("RFKILL-HW Radio ON, RF ON\n")); + + rfpwr_toset = ERFON; + ppsc->hwradiooff = false; + actuallyset = true; + } else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) { + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + ("RFKILL-HW Radio OFF, RF OFF\n")); + + rfpwr_toset = ERFOFF; + ppsc->hwradiooff = true; + actuallyset = true; + } + + if (actuallyset) { + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + ppsc->rfchange_inprogress = false; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + + /* this not include ifconfig wlan0 down case */ + /* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */ + } else { + /* because power_domain_init may be happen when + * _rtl92s_phy_set_rfhalt, this will open some powers + * and cause current increasing about 40 mA for ips, + * rfoff and ifconfig down, so we set + * _rtl92s_phy_set_rfhalt again here */ + if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC && + turnonbypowerdomain) { + _rtl92s_phy_set_rfhalt(hw); + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + } + + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + ppsc->rfchange_inprogress = false; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } + + *valid = 1; + return !ppsc->hwradiooff; + +} + +/* Is_wepkey just used for WEP used as group & pairwise key + * if pairwise is AES ang group is WEP Is_wepkey == false.*/ +void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr, + bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 *macaddr = p_macaddr; + + u32 entry_id = 0; + bool is_pairwise = false; + + static u8 cam_const_addr[4][6] = { + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x01}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x02}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} + }; + static u8 cam_const_broad[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + }; + + if (clear_all) { + u8 idx = 0; + u8 cam_offset = 0; + u8 clear_number = 5; + + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n")); + + for (idx = 0; idx < clear_number; idx++) { + rtl_cam_mark_invalid(hw, cam_offset + idx); + rtl_cam_empty_entry(hw, cam_offset + idx); + + if (idx < 5) { + memset(rtlpriv->sec.key_buf[idx], 0, + MAX_KEY_LEN); + rtlpriv->sec.key_len[idx] = 0; + } + } + + } else { + switch (enc_algo) { + case WEP40_ENCRYPTION: + enc_algo = CAM_WEP40; + break; + case WEP104_ENCRYPTION: + enc_algo = CAM_WEP104; + break; + case TKIP_ENCRYPTION: + enc_algo = CAM_TKIP; + break; + case AESCCMP_ENCRYPTION: + enc_algo = CAM_AES; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + enc_algo = CAM_TKIP; + break; + } + + if (is_wepkey || rtlpriv->sec.use_defaultkey) { + macaddr = cam_const_addr[key_index]; + entry_id = key_index; + } else { + if (is_group) { + macaddr = cam_const_broad; + entry_id = key_index; + } else { + if (mac->opmode == NL80211_IFTYPE_AP) { + entry_id = rtl_cam_get_free_entry(hw, + p_macaddr); + if (entry_id >= TOTAL_CAM_ENTRY) { + RT_TRACE(rtlpriv, + COMP_SEC, DBG_EMERG, + ("Can not find free hw" + " security cam entry\n")); + return; + } + } else { + entry_id = CAM_PAIRWISE_KEY_POSITION; + } + + key_index = PAIRWISE_KEYIDX; + is_pairwise = true; + } + } + + if (rtlpriv->sec.key_len[key_index] == 0) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("delete one entry, entry_id is %d\n", + entry_id)); + if (mac->opmode == NL80211_IFTYPE_AP) + rtl_cam_del_entry(hw, p_macaddr); + rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); + } else { + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, + ("The insert KEY length is %d\n", + rtlpriv->sec.key_len[PAIRWISE_KEYIDX])); + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, + ("The insert KEY is %x %x\n", + rtlpriv->sec.key_buf[0][0], + rtlpriv->sec.key_buf[0][1])); + + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("add one entry\n")); + if (is_pairwise) { + RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD, + "Pairwiase Key content :", + rtlpriv->sec.pairwise_key, + rtlpriv->sec.key_len[PAIRWISE_KEYIDX]); + + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("set Pairwiase key\n")); + + rtl_cam_add_one_entry(hw, macaddr, key_index, + entry_id, enc_algo, + CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[key_index]); + } else { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("set group key\n")); + + if (mac->opmode == NL80211_IFTYPE_ADHOC) { + rtl_cam_add_one_entry(hw, + rtlefuse->dev_addr, + PAIRWISE_KEYIDX, + CAM_PAIRWISE_KEY_POSITION, + enc_algo, CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[entry_id]); + } + + rtl_cam_add_one_entry(hw, macaddr, key_index, + entry_id, enc_algo, + CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[entry_id]); + } + + } + } +} + +void rtl92se_suspend(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtlpci->up_first_time = true; +} + +void rtl92se_resume(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u32 val; + + pci_read_config_dword(rtlpci->pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(rtlpci->pdev, 0x40, + val & 0xffff00ff); +} diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.h b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h new file mode 100644 index 00000000000..6160a9bfe98 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.h @@ -0,0 +1,79 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __REALTEK_PCI92SE_HW_H__ +#define __REALTEK_PCI92SE_HW_H__ + +#define MSR_LINK_MANAGED 2 +#define MSR_LINK_NONE 0 +#define MSR_LINK_SHIFT 0 +#define MSR_LINK_ADHOC 1 +#define MSR_LINK_MASTER 3 + +enum WIRELESS_NETWORK_TYPE { + WIRELESS_11B = 1, + WIRELESS_11G = 2, + WIRELESS_11A = 4, + WIRELESS_11N = 8 +}; + +void rtl92se_get_hw_reg(struct ieee80211_hw *hw, + u8 variable, u8 *val); +void rtl92se_read_eeprom_info(struct ieee80211_hw *hw); +void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, + u32 *inta, u32 *intb); +int rtl92se_hw_init(struct ieee80211_hw *hw); +void rtl92se_card_disable(struct ieee80211_hw *hw); +void rtl92se_enable_interrupt(struct ieee80211_hw *hw); +void rtl92se_disable_interrupt(struct ieee80211_hw *hw); +int rtl92se_set_network_type(struct ieee80211_hw *hw, + enum nl80211_iftype type); +void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid); +void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr); +void rtl92se_set_qos(struct ieee80211_hw *hw, int aci); +void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw); +void rtl92se_set_beacon_interval(struct ieee80211_hw *hw); +void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw, + u32 add_msr, u32 rm_msr); +void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, + u8 *val); +void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u8 rssi_level); +void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw); +bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, + u8 *valid); +void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw); +void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw); +void rtl92se_set_key(struct ieee80211_hw *hw, + u32 key_index, u8 *macaddr, bool is_group, + u8 enc_algo, bool is_wepkey, bool clear_all); +void rtl92se_suspend(struct ieee80211_hw *hw); +void rtl92se_resume(struct ieee80211_hw *hw); + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/led.c b/drivers/net/wireless/rtlwifi/rtl8192se/led.c new file mode 100644 index 00000000000..6d4f6661668 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/led.c @@ -0,0 +1,149 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../pci.h" +#include "reg.h" +#include "led.h" + +static void _rtl92se_init_led(struct ieee80211_hw *hw, + struct rtl_led *pled, enum rtl_led_pin ledpin) +{ + pled->hw = hw; + pled->ledpin = ledpin; + pled->ledon = false; +} + +void rtl92se_init_sw_leds(struct ieee80211_hw *hw) +{ + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + _rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0); + _rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1); +} + +void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled) +{ + u8 ledcfg; + struct rtl_priv *rtlpriv = rtl_priv(hw); + + RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, + ("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin)); + + ledcfg = rtl_read_byte(rtlpriv, LEDCFG); + + switch (pled->ledpin) { + case LED_PIN_GPIO0: + break; + case LED_PIN_LED0: + rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0xf0); + break; + case LED_PIN_LED1: + rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + pled->ledon = true; +} + +void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + u8 ledcfg; + + RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, + ("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin)); + + ledcfg = rtl_read_byte(rtlpriv, LEDCFG); + + switch (pled->ledpin) { + case LED_PIN_GPIO0: + break; + case LED_PIN_LED0: + ledcfg &= 0xf0; + if (pcipriv->ledctl.led_opendrain == true) + rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(1))); + else + rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3))); + break; + case LED_PIN_LED1: + ledcfg &= 0x0f; + rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3))); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + pled->ledon = false; +} + +static void _rtl92se_sw_led_control(struct ieee80211_hw *hw, + enum led_ctl_mode ledaction) +{ + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); + switch (ledaction) { + case LED_CTL_POWER_ON: + case LED_CTL_LINK: + case LED_CTL_NO_LINK: + rtl92se_sw_led_on(hw, pLed0); + break; + case LED_CTL_POWER_OFF: + rtl92se_sw_led_off(hw, pLed0); + break; + default: + break; + } +} + +void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) && + (ledaction == LED_CTL_TX || + ledaction == LED_CTL_RX || + ledaction == LED_CTL_SITE_SURVEY || + ledaction == LED_CTL_LINK || + ledaction == LED_CTL_NO_LINK || + ledaction == LED_CTL_START_TO_LINK || + ledaction == LED_CTL_POWER_ON)) { + return; + } + RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n", + ledaction)); + + _rtl92se_sw_led_control(hw, ledaction); +} + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/led.h b/drivers/net/wireless/rtlwifi/rtl8192se/led.h new file mode 100644 index 00000000000..8cce3870af3 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/led.h @@ -0,0 +1,37 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __REALTEK_PCI92SE_LED_H__ +#define __REALTEK_PCI92SE_LED_H__ + +void rtl92se_init_sw_leds(struct ieee80211_hw *hw); +void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled); +void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled); +void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction); + +#endif diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c new file mode 100644 index 00000000000..63b45e60a95 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c @@ -0,0 +1,1740 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../pci.h" +#include "../ps.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "rf.h" +#include "dm.h" +#include "fw.h" +#include "hw.h" +#include "table.h" + +static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask) +{ + u32 i; + + for (i = 0; i <= 31; i++) { + if (((bitmask >> i) & 0x1) == 1) + break; + } + + return i; +} + +u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 returnvalue = 0, originalvalue, bitshift; + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)\n", + regaddr, bitmask)); + + originalvalue = rtl_read_dword(rtlpriv, regaddr); + bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + returnvalue = (originalvalue & bitmask) >> bitshift; + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, + ("BBR MASK=0x%x Addr[0x%x]=0x%x\n", + bitmask, regaddr, originalvalue)); + + return returnvalue; + +} + +void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask, + u32 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 originalvalue, bitshift; + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)," + " data(%#x)\n", regaddr, bitmask, data)); + + if (bitmask != MASKDWORD) { + originalvalue = rtl_read_dword(rtlpriv, regaddr); + bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + data = ((originalvalue & (~bitmask)) | (data << bitshift)); + } + + rtl_write_dword(rtlpriv, regaddr, data); + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)," + " data(%#x)\n", regaddr, bitmask, data)); + +} + +static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw, + enum radio_path rfpath, u32 offset) +{ + + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath]; + u32 newoffset; + u32 tmplong, tmplong2; + u8 rfpi_enable = 0; + u32 retvalue = 0; + + offset &= 0x3f; + newoffset = offset; + + tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD); + + if (rfpath == RF90_PATH_A) + tmplong2 = tmplong; + else + tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD); + + tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) | + BLSSI_READEDGE; + + rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, + tmplong & (~BLSSI_READEDGE)); + + mdelay(1); + + rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2); + mdelay(1); + + rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong | + BLSSI_READEDGE); + mdelay(1); + + if (rfpath == RF90_PATH_A) + rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1, + BIT(8)); + else if (rfpath == RF90_PATH_B) + rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1, + BIT(8)); + + if (rfpi_enable) + retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi, + BLSSI_READBACK_DATA); + else + retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback, + BLSSI_READBACK_DATA); + + retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback, + BLSSI_READBACK_DATA); + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n", + rfpath, pphyreg->rflssi_readback, retvalue)); + + return retvalue; + +} + +static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw, + enum radio_path rfpath, u32 offset, + u32 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath]; + u32 data_and_addr = 0; + u32 newoffset; + + offset &= 0x3f; + newoffset = offset; + + data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff; + rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr); + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n", + rfpath, pphyreg->rf3wire_offset, data_and_addr)); +} + + +u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, + u32 regaddr, u32 bitmask) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 original_value, readback_value, bitshift; + unsigned long flags; + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), " + "bitmask(%#x)\n", regaddr, rfpath, bitmask)); + + spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags); + + original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr); + + bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + readback_value = (original_value & bitmask) >> bitshift; + + spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags); + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), " + "bitmask(%#x), original_value(%#x)\n", regaddr, rfpath, + bitmask, original_value)); + + return readback_value; +} + +void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, + u32 regaddr, u32 bitmask, u32 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u32 original_value, bitshift; + unsigned long flags; + + if (!((rtlphy->rf_pathmap >> rfpath) & 0x1)) + return; + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)," + " data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath)); + + spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags); + + if (bitmask != RFREG_OFFSET_MASK) { + original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, + regaddr); + bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + data = ((original_value & (~bitmask)) | (data << bitshift)); + } + + _rtl92s_phy_rf_serial_write(hw, rfpath, regaddr, data); + + spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags); + + RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x), " + "data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath)); + +} + +void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, + u8 operation) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + + if (!is_hal_stop(rtlhal)) { + switch (operation) { + case SCAN_OPT_BACKUP: + rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN); + break; + case SCAN_OPT_RESTORE: + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Unknown operation.\n")); + break; + } + } +} + +void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw, + enum nl80211_channel_type ch_type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u8 reg_bw_opmode; + u8 reg_prsr_rsc; + + RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("Switch to %s bandwidth\n", + rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ? + "20MHz" : "40MHz")); + + if (rtlphy->set_bwmode_inprogress) + return; + if (is_hal_stop(rtlhal)) + return; + + rtlphy->set_bwmode_inprogress = true; + + reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE); + reg_prsr_rsc = rtl_read_byte(rtlpriv, RRSR + 2); + + switch (rtlphy->current_chan_bw) { + case HT_CHANNEL_WIDTH_20: + reg_bw_opmode |= BW_OPMODE_20MHZ; + rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode); + break; + case HT_CHANNEL_WIDTH_20_40: + reg_bw_opmode &= ~BW_OPMODE_20MHZ; + rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("unknown bandwidth: %#X\n", + rtlphy->current_chan_bw)); + break; + } + + switch (rtlphy->current_chan_bw) { + case HT_CHANNEL_WIDTH_20: + rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0); + rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0); + + if (rtlhal->version >= VERSION_8192S_BCUT) + rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58); + break; + case HT_CHANNEL_WIDTH_20_40: + rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1); + rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1); + + rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND, + (mac->cur_40_prime_sc >> 1)); + rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc); + + if (rtlhal->version >= VERSION_8192S_BCUT) + rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw)); + break; + } + + rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw); + rtlphy->set_bwmode_inprogress = false; + RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n")); +} + +static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable, + u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid, + u32 para1, u32 para2, u32 msdelay) +{ + struct swchnlcmd *pcmd; + + if (cmdtable == NULL) { + RT_ASSERT(false, ("cmdtable cannot be NULL.\n")); + return false; + } + + if (cmdtableidx >= cmdtablesz) + return false; + + pcmd = cmdtable + cmdtableidx; + pcmd->cmdid = cmdid; + pcmd->para1 = para1; + pcmd->para2 = para2; + pcmd->msdelay = msdelay; + + return true; +} + +static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, + u8 channel, u8 *stage, u8 *step, u32 *delay) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct swchnlcmd precommoncmd[MAX_PRECMD_CNT]; + u32 precommoncmdcnt; + struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT]; + u32 postcommoncmdcnt; + struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT]; + u32 rfdependcmdcnt; + struct swchnlcmd *currentcmd = NULL; + u8 rfpath; + u8 num_total_rfpath = rtlphy->num_total_rfpath; + + precommoncmdcnt = 0; + _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++, + MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0); + _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++, + MAX_PRECMD_CNT, CMDID_END, 0, 0, 0); + + postcommoncmdcnt = 0; + + _rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++, + MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0); + + rfdependcmdcnt = 0; + + RT_ASSERT((channel >= 1 && channel <= 14), + ("illegal channel for Zebra: %d\n", channel)); + + _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++, + MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG, + RF_CHNLBW, channel, 10); + + _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++, + MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0); + + do { + switch (*stage) { + case 0: + currentcmd = &precommoncmd[*step]; + break; + case 1: + currentcmd = &rfdependcmd[*step]; + break; + case 2: + currentcmd = &postcommoncmd[*step]; + break; + } + + if (currentcmd->cmdid == CMDID_END) { + if ((*stage) == 2) { + return true; + } else { + (*stage)++; + (*step) = 0; + continue; + } + } + + switch (currentcmd->cmdid) { + case CMDID_SET_TXPOWEROWER_LEVEL: + rtl92s_phy_set_txpower(hw, channel); + break; + case CMDID_WRITEPORT_ULONG: + rtl_write_dword(rtlpriv, currentcmd->para1, + currentcmd->para2); + break; + case CMDID_WRITEPORT_USHORT: + rtl_write_word(rtlpriv, currentcmd->para1, + (u16)currentcmd->para2); + break; + case CMDID_WRITEPORT_UCHAR: + rtl_write_byte(rtlpriv, currentcmd->para1, + (u8)currentcmd->para2); + break; + case CMDID_RF_WRITEREG: + for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) { + rtlphy->rfreg_chnlval[rfpath] = + ((rtlphy->rfreg_chnlval[rfpath] & + 0xfffffc00) | currentcmd->para2); + rtl_set_rfreg(hw, (enum radio_path)rfpath, + currentcmd->para1, + RFREG_OFFSET_MASK, + rtlphy->rfreg_chnlval[rfpath]); + } + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + + break; + } while (true); + + (*delay) = currentcmd->msdelay; + (*step)++; + return false; +} + +u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u32 delay; + bool ret; + + RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, + ("switch to channel%d\n", + rtlphy->current_channel)); + + if (rtlphy->sw_chnl_inprogress) + return 0; + + if (rtlphy->set_bwmode_inprogress) + return 0; + + if (is_hal_stop(rtlhal)) + return 0; + + rtlphy->sw_chnl_inprogress = true; + rtlphy->sw_chnl_stage = 0; + rtlphy->sw_chnl_step = 0; + + do { + if (!rtlphy->sw_chnl_inprogress) + break; + + ret = _rtl92s_phy_sw_chnl_step_by_step(hw, + rtlphy->current_channel, + &rtlphy->sw_chnl_stage, + &rtlphy->sw_chnl_step, &delay); + if (!ret) { + if (delay > 0) + mdelay(delay); + else + continue; + } else { + rtlphy->sw_chnl_inprogress = false; + } + break; + } while (true); + + rtlphy->sw_chnl_inprogress = false; + + RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n")); + + return 1; +} + +static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 u1btmp; + + u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL); + u1btmp |= BIT(0); + + rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp); + rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0); + rtl_write_byte(rtlpriv, TXPAUSE, 0xFF); + rtl_write_word(rtlpriv, CMDR, 0x57FC); + udelay(100); + + rtl_write_word(rtlpriv, CMDR, 0x77FC); + rtl_write_byte(rtlpriv, PHY_CCA, 0x0); + udelay(10); + + rtl_write_word(rtlpriv, CMDR, 0x37FC); + udelay(10); + + rtl_write_word(rtlpriv, CMDR, 0x77FC); + udelay(10); + + rtl_write_word(rtlpriv, CMDR, 0x57FC); + + /* we should chnge GPIO to input mode + * this will drop away current about 25mA*/ + rtl8192se_gpiobit3_cfg_inputmode(hw); +} + +bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, + enum rf_pwrstate rfpwr_state) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + bool bresult = true; + u8 i, queue_id; + struct rtl8192_tx_ring *ring = NULL; + + if (rfpwr_state == ppsc->rfpwr_state) + return false; + + ppsc->set_rfpowerstate_inprogress = true; + + switch (rfpwr_state) { + case ERFON:{ + if ((ppsc->rfpwr_state == ERFOFF) && + RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) { + + bool rtstatus; + u32 InitializeCount = 0; + do { + InitializeCount++; + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + ("IPS Set eRf nic enable\n")); + rtstatus = rtl_ps_enable_nic(hw); + } while ((rtstatus != true) && + (InitializeCount < 10)); + + RT_CLEAR_PS_LEVEL(ppsc, + RT_RF_OFF_LEVL_HALT_NIC); + } else { + RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, + ("awake, sleeped:%d ms " + "state_inap:%x\n", + jiffies_to_msecs(jiffies - + ppsc->last_sleep_jiffies), + rtlpriv->psc.state_inap)); + ppsc->last_awake_jiffies = jiffies; + rtl_write_word(rtlpriv, CMDR, 0x37FC); + rtl_write_byte(rtlpriv, TXPAUSE, 0x00); + rtl_write_byte(rtlpriv, PHY_CCA, 0x3); + } + + if (mac->link_state == MAC80211_LINKED) + rtlpriv->cfg->ops->led_control(hw, + LED_CTL_LINK); + else + rtlpriv->cfg->ops->led_control(hw, + LED_CTL_NO_LINK); + break; + } + case ERFOFF:{ + if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) { + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + ("IPS Set eRf nic disable\n")); + rtl_ps_disable_nic(hw); + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + } else { + if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) + rtlpriv->cfg->ops->led_control(hw, + LED_CTL_NO_LINK); + else + rtlpriv->cfg->ops->led_control(hw, + LED_CTL_POWER_OFF); + } + break; + } + case ERFSLEEP: + if (ppsc->rfpwr_state == ERFOFF) + break; + + for (queue_id = 0, i = 0; + queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { + ring = &pcipriv->dev.tx_ring[queue_id]; + if (skb_queue_len(&ring->queue) == 0 || + queue_id == BEACON_QUEUE) { + queue_id++; + continue; + } else { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("eRf Off/Sleep: " + "%d times TcbBusyQueue[%d] = " + "%d before doze!\n", + (i + 1), queue_id, + skb_queue_len(&ring->queue))); + + udelay(10); + i++; + } + + if (i >= MAX_DOZE_WAITING_TIMES_9x) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("\nERFOFF: %d times" + "TcbBusyQueue[%d] = %d !\n", + MAX_DOZE_WAITING_TIMES_9x, + queue_id, + skb_queue_len(&ring->queue))); + break; + } + } + + RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, + ("Set ERFSLEEP awaked:%d ms\n", + jiffies_to_msecs(jiffies - + ppsc->last_awake_jiffies))); + + RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, + ("sleep awaked:%d ms " + "state_inap:%x\n", jiffies_to_msecs(jiffies - + ppsc->last_awake_jiffies), + rtlpriv->psc.state_inap)); + ppsc->last_sleep_jiffies = jiffies; + _rtl92se_phy_set_rf_sleep(hw); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + bresult = false; + break; + } + + if (bresult) + ppsc->rfpwr_state = rfpwr_state; + + ppsc->set_rfpowerstate_inprogress = false; + + return bresult; +} + +static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw, + enum radio_path rfpath) +{ + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + bool rtstatus = true; + u32 tmpval = 0; + + /* If inferiority IC, we have to increase the PA bias current */ + if (rtlhal->ic_class != IC_INFERIORITY_A) { + tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf); + rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1); + } + + return rtstatus; +} + +static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw, + u32 reg_addr, u32 bitmask, u32 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + if (reg_addr == RTXAGC_RATE18_06) + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] = + data; + if (reg_addr == RTXAGC_RATE54_24) + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] = + data; + if (reg_addr == RTXAGC_CCK_MCS32) + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] = + data; + if (reg_addr == RTXAGC_MCS03_MCS00) + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] = + data; + if (reg_addr == RTXAGC_MCS07_MCS04) + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] = + data; + if (reg_addr == RTXAGC_MCS11_MCS08) + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] = + data; + if (reg_addr == RTXAGC_MCS15_MCS12) { + rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] = + data; + rtlphy->pwrgroup_cnt++; + } +} + +static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + /*RF Interface Sowrtware Control */ + rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW; + rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW; + rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW; + rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW; + + /* RF Interface Readback Value */ + rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB; + rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB; + rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB; + rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB; + + /* RF Interface Output (and Enable) */ + rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE; + rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE; + rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE; + rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE; + + /* RF Interface (Output and) Enable */ + rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE; + rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE; + rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE; + rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE; + + /* Addr of LSSI. Wirte RF register by driver */ + rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset = + RFPGA0_XA_LSSIPARAMETER; + rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset = + RFPGA0_XB_LSSIPARAMETER; + rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset = + RFPGA0_XC_LSSIPARAMETER; + rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset = + RFPGA0_XD_LSSIPARAMETER; + + /* RF parameter */ + rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER; + rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER; + rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER; + rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER; + + /* Tx AGC Gain Stage (same for all path. Should we remove this?) */ + rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE; + rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE; + rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE; + rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE; + + /* Tranceiver A~D HSSI Parameter-1 */ + rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1; + rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1; + rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1; + rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1; + + /* Tranceiver A~D HSSI Parameter-2 */ + rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2; + rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2; + rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2; + rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 = RFPGA0_XD_HSSIPARAMETER2; + + /* RF switch Control */ + rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control = + RFPGA0_XAB_SWITCHCONTROL; + rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control = + RFPGA0_XAB_SWITCHCONTROL; + rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control = + RFPGA0_XCD_SWITCHCONTROL; + rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control = + RFPGA0_XCD_SWITCHCONTROL; + + /* AGC control 1 */ + rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1; + rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1; + rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1; + rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1; + + /* AGC control 2 */ + rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2; + rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2; + rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2; + rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2; + + /* RX AFE control 1 */ + rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance = + ROFDM0_XARXIQIMBALANCE; + rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance = + ROFDM0_XBRXIQIMBALANCE; + rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance = + ROFDM0_XCRXIQIMBALANCE; + rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance = + ROFDM0_XDRXIQIMBALANCE; + + /* RX AFE control 1 */ + rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE; + rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE; + rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE; + rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE; + + /* Tx AFE control 1 */ + rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance = + ROFDM0_XATXIQIMBALANCE; + rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance = + ROFDM0_XBTXIQIMBALANCE; + rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance = + ROFDM0_XCTXIQIMBALANCE; + rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance = + ROFDM0_XDTXIQIMBALANCE; + + /* Tx AFE control 2 */ + rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE; + rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE; + rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE; + rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE; + + /* Tranceiver LSSI Readback */ + rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback = + RFPGA0_XA_LSSIREADBACK; + rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback = + RFPGA0_XB_LSSIREADBACK; + rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback = + RFPGA0_XC_LSSIREADBACK; + rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback = + RFPGA0_XD_LSSIREADBACK; + + /* Tranceiver LSSI Readback PI mode */ + rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi = + TRANSCEIVERA_HSPI_READBACK; + rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi = + TRANSCEIVERB_HSPI_READBACK; +} + + +static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype) +{ + int i; + u32 *phy_reg_table; + u32 *agc_table; + u16 phy_reg_len, agc_len; + + agc_len = AGCTAB_ARRAYLENGTH; + agc_table = rtl8192seagctab_array; + /* Default RF_type: 2T2R */ + phy_reg_len = PHY_REG_2T2RARRAYLENGTH; + phy_reg_table = rtl8192sephy_reg_2t2rarray; + + if (configtype == BASEBAND_CONFIG_PHY_REG) { + for (i = 0; i < phy_reg_len; i = i + 2) { + if (phy_reg_table[i] == 0xfe) + mdelay(50); + else if (phy_reg_table[i] == 0xfd) + mdelay(5); + else if (phy_reg_table[i] == 0xfc) + mdelay(1); + else if (phy_reg_table[i] == 0xfb) + udelay(50); + else if (phy_reg_table[i] == 0xfa) + udelay(5); + else if (phy_reg_table[i] == 0xf9) + udelay(1); + + /* Add delay for ECS T20 & LG malow platform, */ + udelay(1); + + rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD, + phy_reg_table[i + 1]); + } + } else if (configtype == BASEBAND_CONFIG_AGC_TAB) { + for (i = 0; i < agc_len; i = i + 2) { + rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD, + agc_table[i + 1]); + + /* Add delay for ECS T20 & LG malow platform */ + udelay(1); + } + } + + return true; +} + +static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw, + u8 configtype) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u32 *phy_regarray2xtxr_table; + u16 phy_regarray2xtxr_len; + int i; + + if (rtlphy->rf_type == RF_1T1R) { + phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray; + phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH; + } else if (rtlphy->rf_type == RF_1T2R) { + phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray; + phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH; + } else { + return false; + } + + if (configtype == BASEBAND_CONFIG_PHY_REG) { + for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) { + if (phy_regarray2xtxr_table[i] == 0xfe) + mdelay(50); + else if (phy_regarray2xtxr_table[i] == 0xfd) + mdelay(5); + else if (phy_regarray2xtxr_table[i] == 0xfc) + mdelay(1); + else if (phy_regarray2xtxr_table[i] == 0xfb) + udelay(50); + else if (phy_regarray2xtxr_table[i] == 0xfa) + udelay(5); + else if (phy_regarray2xtxr_table[i] == 0xf9) + udelay(1); + + rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i], + phy_regarray2xtxr_table[i + 1], + phy_regarray2xtxr_table[i + 2]); + } + } + + return true; +} + +static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw, + u8 configtype) +{ + int i; + u32 *phy_table_pg; + u16 phy_pg_len; + + phy_pg_len = PHY_REG_ARRAY_PGLENGTH; + phy_table_pg = rtl8192sephy_reg_array_pg; + + if (configtype == BASEBAND_CONFIG_PHY_REG) { + for (i = 0; i < phy_pg_len; i = i + 3) { + if (phy_table_pg[i] == 0xfe) + mdelay(50); + else if (phy_table_pg[i] == 0xfd) + mdelay(5); + else if (phy_table_pg[i] == 0xfc) + mdelay(1); + else if (phy_table_pg[i] == 0xfb) + udelay(50); + else if (phy_table_pg[i] == 0xfa) + udelay(5); + else if (phy_table_pg[i] == 0xf9) + udelay(1); + + _rtl92s_store_pwrindex_diffrate_offset(hw, + phy_table_pg[i], + phy_table_pg[i + 1], + phy_table_pg[i + 2]); + rtl92s_phy_set_bb_reg(hw, phy_table_pg[i], + phy_table_pg[i + 1], + phy_table_pg[i + 2]); + } + } + + return true; +} + +static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + bool rtstatus = true; + + /* 1. Read PHY_REG.TXT BB INIT!! */ + /* We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R */ + if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R || + rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) { + rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG); + + if (rtlphy->rf_type != RF_2T2R && + rtlphy->rf_type != RF_2T2R_GREEN) + /* so we should reconfig BB reg with the right + * PHY parameters. */ + rtstatus = _rtl92s_phy_set_bb_to_diff_rf(hw, + BASEBAND_CONFIG_PHY_REG); + } else { + rtstatus = false; + } + + if (rtstatus != true) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("Write BB Reg Fail!!")); + goto phy_BB8190_Config_ParaFile_Fail; + } + + /* 2. If EEPROM or EFUSE autoload OK, We must config by + * PHY_REG_PG.txt */ + if (rtlefuse->autoload_failflag == false) { + rtlphy->pwrgroup_cnt = 0; + + rtstatus = _rtl92s_phy_config_bb_with_pg(hw, + BASEBAND_CONFIG_PHY_REG); + } + if (rtstatus != true) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("_rtl92s_phy_bb_config_parafile(): " + "BB_PG Reg Fail!!")); + goto phy_BB8190_Config_ParaFile_Fail; + } + + /* 3. BB AGC table Initialization */ + rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB); + + if (rtstatus != true) { + printk(KERN_ERR "_rtl92s_phy_bb_config_parafile(): " + "AGC Table Fail\n"); + goto phy_BB8190_Config_ParaFile_Fail; + } + + /* Check if the CCK HighPower is turned ON. */ + /* This is used to calculate PWDB. */ + rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw, + RFPGA0_XA_HSSIPARAMETER2, 0x200)); + +phy_BB8190_Config_ParaFile_Fail: + return rtstatus; +} + +u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + int i; + bool rtstatus = true; + u32 *radio_a_table; + u32 *radio_b_table; + u16 radio_a_tblen, radio_b_tblen; + + radio_a_tblen = RADIOA_1T_ARRAYLENGTH; + radio_a_table = rtl8192seradioa_1t_array; + + /* Using Green mode array table for RF_2T2R_GREEN */ + if (rtlphy->rf_type == RF_2T2R_GREEN) { + radio_b_table = rtl8192seradiob_gm_array; + radio_b_tblen = RADIOB_GM_ARRAYLENGTH; + } else { + radio_b_table = rtl8192seradiob_array; + radio_b_tblen = RADIOB_ARRAYLENGTH; + } + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Radio No %x\n", rfpath)); + rtstatus = true; + + switch (rfpath) { + case RF90_PATH_A: + for (i = 0; i < radio_a_tblen; i = i + 2) { + if (radio_a_table[i] == 0xfe) + /* Delay specific ms. Only RF configuration + * requires delay. */ + mdelay(50); + else if (radio_a_table[i] == 0xfd) + mdelay(5); + else if (radio_a_table[i] == 0xfc) + mdelay(1); + else if (radio_a_table[i] == 0xfb) + udelay(50); + else if (radio_a_table[i] == 0xfa) + udelay(5); + else if (radio_a_table[i] == 0xf9) + udelay(1); + else + rtl92s_phy_set_rf_reg(hw, rfpath, + radio_a_table[i], + MASK20BITS, + radio_a_table[i + 1]); + + /* Add delay for ECS T20 & LG malow platform */ + udelay(1); + } + + /* PA Bias current for inferiority IC */ + _rtl92s_phy_config_rfpa_bias_current(hw, rfpath); + break; + case RF90_PATH_B: + for (i = 0; i < radio_b_tblen; i = i + 2) { + if (radio_b_table[i] == 0xfe) + /* Delay specific ms. Only RF configuration + * requires delay.*/ + mdelay(50); + else if (radio_b_table[i] == 0xfd) + mdelay(5); + else if (radio_b_table[i] == 0xfc) + mdelay(1); + else if (radio_b_table[i] == 0xfb) + udelay(50); + else if (radio_b_table[i] == 0xfa) + udelay(5); + else if (radio_b_table[i] == 0xf9) + udelay(1); + else + rtl92s_phy_set_rf_reg(hw, rfpath, + radio_b_table[i], + MASK20BITS, + radio_b_table[i + 1]); + + /* Add delay for ECS T20 & LG malow platform */ + udelay(1); + } + break; + case RF90_PATH_C: + ; + break; + case RF90_PATH_D: + ; + break; + default: + break; + } + + return rtstatus; +} + + +bool rtl92s_phy_mac_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 i; + u32 arraylength; + u32 *ptraArray; + + arraylength = MAC_2T_ARRAYLENGTH; + ptraArray = rtl8192semac_2t_array; + + for (i = 0; i < arraylength; i = i + 2) + rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]); + + return true; +} + + +bool rtl92s_phy_bb_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + bool rtstatus = true; + u8 pathmap, index, rf_num = 0; + u8 path1, path2; + + _rtl92s_phy_init_register_definition(hw); + + /* Config BB and AGC */ + rtstatus = _rtl92s_phy_bb_config_parafile(hw); + + + /* Check BB/RF confiuration setting. */ + /* We only need to configure RF which is turned on. */ + path1 = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf)); + mdelay(10); + path2 = (u8)(rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE, 0xf)); + pathmap = path1 | path2; + + rtlphy->rf_pathmap = pathmap; + for (index = 0; index < 4; index++) { + if ((pathmap >> index) & 0x1) + rf_num++; + } + + if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) || + (rtlphy->rf_type == RF_1T2R && rf_num != 2) || + (rtlphy->rf_type == RF_2T2R && rf_num != 2) || + (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("RF_Type(%x) does not match " + "RF_Num(%x)!!\n", rtlphy->rf_type, rf_num)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("path1 0x%x, path2 0x%x, pathmap " + "0x%x\n", path1, path2, pathmap)); + } + + return rtstatus; +} + +bool rtl92s_phy_rf_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + /* Initialize general global value */ + if (rtlphy->rf_type == RF_1T1R) + rtlphy->num_total_rfpath = 1; + else + rtlphy->num_total_rfpath = 2; + + /* Config BB and RF */ + return rtl92s_phy_rf6052_config(hw); +} + +void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + /* read rx initial gain */ + rtlphy->default_initialgain[0] = rtl_get_bbreg(hw, + ROFDM0_XAAGCCORE1, MASKBYTE0); + rtlphy->default_initialgain[1] = rtl_get_bbreg(hw, + ROFDM0_XBAGCCORE1, MASKBYTE0); + rtlphy->default_initialgain[2] = rtl_get_bbreg(hw, + ROFDM0_XCAGCCORE1, MASKBYTE0); + rtlphy->default_initialgain[3] = rtl_get_bbreg(hw, + ROFDM0_XDAGCCORE1, MASKBYTE0); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Default initial gain " + "(c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n", + rtlphy->default_initialgain[0], + rtlphy->default_initialgain[1], + rtlphy->default_initialgain[2], + rtlphy->default_initialgain[3])); + + /* read framesync */ + rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3, MASKBYTE0); + rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2, + MASKDWORD); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("Default framesync (0x%x) = 0x%x\n", + ROFDM0_RXDETECTOR3, rtlphy->framesync)); + +} + +static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel, + u8 *cckpowerlevel, u8 *ofdmpowerLevel) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 index = (channel - 1); + + /* 1. CCK */ + /* RF-A */ + cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index]; + /* RF-B */ + cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index]; + + /* 2. OFDM for 1T or 2T */ + if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) { + /* Read HT 40 OFDM TX power */ + ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index]; + ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index]; + } else if (rtlphy->rf_type == RF_2T2R) { + /* Read HT 40 OFDM TX power */ + ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index]; + ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index]; + } +} + +static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw, + u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + rtlphy->cur_cck_txpwridx = cckpowerlevel[0]; + rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0]; +} + +void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + /* [0]:RF-A, [1]:RF-B */ + u8 cckpowerlevel[2], ofdmpowerLevel[2]; + + if (rtlefuse->txpwr_fromeprom == false) + return; + + /* Mainly we use RF-A Tx Power to write the Tx Power registers, + * but the RF-B Tx Power must be calculated by the antenna diff. + * So we have to rewrite Antenna gain offset register here. + * Please refer to BB register 0x80c + * 1. For CCK. + * 2. For OFDM 1T or 2T */ + _rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0], + &ofdmpowerLevel[0]); + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Channel-%d, cckPowerLevel (A / B) = " + "0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n", + channel, cckpowerlevel[0], cckpowerlevel[1], + ofdmpowerLevel[0], ofdmpowerLevel[1])); + + _rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0], + &ofdmpowerLevel[0]); + + rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]); + rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel); + +} + +void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u16 pollingcnt = 10000; + u32 tmpvalue; + + /* Make sure that CMD IO has be accepted by FW. */ + do { + udelay(10); + + tmpvalue = rtl_read_dword(rtlpriv, WFM5); + if (tmpvalue == 0) + break; + } while (--pollingcnt); + + if (pollingcnt == 0) + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Set FW Cmd fail!!\n")); +} + + +static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u32 input, current_aid = 0; + + if (is_hal_stop(rtlhal)) + return; + + /* We re-map RA related CMD IO to combinational ones */ + /* if FW version is v.52 or later. */ + switch (rtlhal->current_fwcmd_io) { + case FW_CMD_RA_REFRESH_N: + rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB; + break; + case FW_CMD_RA_REFRESH_BG: + rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB; + break; + default: + break; + } + + switch (rtlhal->current_fwcmd_io) { + case FW_CMD_RA_RESET: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_RA_RESET\n")); + rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_RA_ACTIVE: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_RA_ACTIVE\n")); + rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_RA_REFRESH_N: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_RA_REFRESH_N\n")); + input = FW_RA_REFRESH; + rtl_write_dword(rtlpriv, WFM5, input); + rtl92s_phy_chk_fwcmd_iodone(hw); + rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_RA_REFRESH_BG: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_RA_REFRESH_BG\n")); + rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH); + rtl92s_phy_chk_fwcmd_iodone(hw); + rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_RA_REFRESH_N_COMB: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_RA_REFRESH_N_COMB\n")); + input = FW_RA_IOT_N_COMB; + rtl_write_dword(rtlpriv, WFM5, input); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_RA_REFRESH_BG_COMB: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_RA_REFRESH_BG_COMB\n")); + input = FW_RA_IOT_BG_COMB; + rtl_write_dword(rtlpriv, WFM5, input); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_IQK_ENABLE: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_IQK_ENABLE\n")); + rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_PAUSE_DM_BY_SCAN: + /* Lower initial gain */ + rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17); + rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17); + /* CCA threshold */ + rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40); + break; + case FW_CMD_RESUME_DM_BY_SCAN: + /* CCA threshold */ + rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd); + rtl92s_phy_set_txpower(hw, rtlphy->current_channel); + break; + case FW_CMD_HIGH_PWR_DISABLE: + if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) + break; + + /* Lower initial gain */ + rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17); + rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17); + /* CCA threshold */ + rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40); + break; + case FW_CMD_HIGH_PWR_ENABLE: + if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) || + (rtlpriv->dm.dynamic_txpower_enable == true)) + break; + + /* CCA threshold */ + rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd); + break; + case FW_CMD_LPS_ENTER: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_LPS_ENTER\n")); + current_aid = rtlpriv->mac80211.assoc_id; + rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER | + ((current_aid | 0xc000) << 8))); + rtl92s_phy_chk_fwcmd_iodone(hw); + /* FW set TXOP disable here, so disable EDCA + * turbo mode until driver leave LPS */ + break; + case FW_CMD_LPS_LEAVE: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_LPS_LEAVE\n")); + rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_ADD_A2_ENTRY: + RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, + ("FW_CMD_ADD_A2_ENTRY\n")); + rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + case FW_CMD_CTRL_DM_BY_DRIVER: + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("FW_CMD_CTRL_DM_BY_DRIVER\n")); + rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER); + rtl92s_phy_chk_fwcmd_iodone(hw); + break; + + default: + break; + } + + rtl92s_phy_chk_fwcmd_iodone(hw); + + /* Clear FW CMD operation flag. */ + rtlhal->set_fwcmd_inprogress = false; +} + +bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u32 fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv); + u16 fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv); + bool bPostProcessing = false; + + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n", + fw_cmdio, rtlhal->set_fwcmd_inprogress)); + + do { + /* We re-map to combined FW CMD ones if firmware version */ + /* is v.53 or later. */ + switch (fw_cmdio) { + case FW_CMD_RA_REFRESH_N: + fw_cmdio = FW_CMD_RA_REFRESH_N_COMB; + break; + case FW_CMD_RA_REFRESH_BG: + fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB; + break; + default: + break; + } + + /* If firmware version is v.62 or later, + * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */ + if (hal_get_firmwareversion(rtlpriv) >= 0x3E) { + if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER) + fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW; + } + + + /* We shall revise all FW Cmd IO into Reg0x364 + * DM map table in the future. */ + switch (fw_cmdio) { + case FW_CMD_RA_INIT: + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("RA init!!\n")); + fw_cmdmap |= FW_RA_INIT_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + /* Clear control flag to sync with FW. */ + FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL); + break; + case FW_CMD_DIG_DISABLE: + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("Set DIG disable!!\n")); + fw_cmdmap &= ~FW_DIG_ENABLE_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + break; + case FW_CMD_DIG_ENABLE: + case FW_CMD_DIG_RESUME: + if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) { + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("Set DIG enable or resume!!\n")); + fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + } + break; + case FW_CMD_DIG_HALT: + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("Set DIG halt!!\n")); + fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + break; + case FW_CMD_TXPWR_TRACK_THERMAL: { + u8 thermalval = 0; + fw_cmdmap |= FW_PWR_TRK_CTL; + + /* Clear FW parameter in terms of thermal parts. */ + fw_param &= FW_PWR_TRK_PARAM_CLR; + + thermalval = rtlpriv->dm.thermalvalue; + fw_param |= ((thermalval << 24) | + (rtlefuse->thermalmeter[0] << 16)); + + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("Set TxPwr tracking!! " + "FwCmdMap(%#x), FwParam(%#x)\n", + fw_cmdmap, fw_param)); + + FW_CMD_PARA_SET(rtlpriv, fw_param); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + + /* Clear control flag to sync with FW. */ + FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL); + } + break; + /* The following FW CMDs are only compatible to + * v.53 or later. */ + case FW_CMD_RA_REFRESH_N_COMB: + fw_cmdmap |= FW_RA_N_CTL; + + /* Clear RA BG mode control. */ + fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL); + + /* Clear FW parameter in terms of RA parts. */ + fw_param &= FW_RA_PARAM_CLR; + + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("[FW CMD] [New Version] " + "Set RA/IOT Comb in n mode!! FwCmdMap(%#x), " + "FwParam(%#x)\n", fw_cmdmap, fw_param)); + + FW_CMD_PARA_SET(rtlpriv, fw_param); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + + /* Clear control flag to sync with FW. */ + FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL); + break; + case FW_CMD_RA_REFRESH_BG_COMB: + fw_cmdmap |= FW_RA_BG_CTL; + + /* Clear RA n-mode control. */ + fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL); + /* Clear FW parameter in terms of RA parts. */ + fw_param &= FW_RA_PARAM_CLR; + + FW_CMD_PARA_SET(rtlpriv, fw_param); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + + /* Clear control flag to sync with FW. */ + FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL); + break; + case FW_CMD_IQK_ENABLE: + fw_cmdmap |= FW_IQK_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + /* Clear control flag to sync with FW. */ + FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL); + break; + /* The following FW CMD is compatible to v.62 or later. */ + case FW_CMD_CTRL_DM_BY_DRIVER_NEW: + fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + break; + /* The followed FW Cmds needs post-processing later. */ + case FW_CMD_RESUME_DM_BY_SCAN: + fw_cmdmap |= (FW_DIG_ENABLE_CTL | + FW_HIGH_PWR_ENABLE_CTL | + FW_SS_CTL); + + if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE || + !digtable.dig_enable_flag) + fw_cmdmap &= ~FW_DIG_ENABLE_CTL; + + if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) || + (rtlpriv->dm.dynamic_txpower_enable == true)) + fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL; + + if ((digtable.dig_ext_port_stage == + DIG_EXT_PORT_STAGE_0) || + (digtable.dig_ext_port_stage == + DIG_EXT_PORT_STAGE_1)) + fw_cmdmap &= ~FW_DIG_ENABLE_CTL; + + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + bPostProcessing = true; + break; + case FW_CMD_PAUSE_DM_BY_SCAN: + fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | + FW_HIGH_PWR_ENABLE_CTL | + FW_SS_CTL); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + bPostProcessing = true; + break; + case FW_CMD_HIGH_PWR_DISABLE: + fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + bPostProcessing = true; + break; + case FW_CMD_HIGH_PWR_ENABLE: + if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) && + (rtlpriv->dm.dynamic_txpower_enable != true)) { + fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL | + FW_SS_CTL); + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + bPostProcessing = true; + } + break; + case FW_CMD_DIG_MODE_FA: + fw_cmdmap |= FW_FA_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + break; + case FW_CMD_DIG_MODE_SS: + fw_cmdmap &= ~FW_FA_CTL; + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + break; + case FW_CMD_PAPE_CONTROL: + RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, + ("[FW CMD] Set PAPE Control\n")); + fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW; + + FW_CMD_IO_SET(rtlpriv, fw_cmdmap); + break; + default: + /* Pass to original FW CMD processing callback + * routine. */ + bPostProcessing = true; + break; + } + } while (false); + + /* We shall post processing these FW CMD if + * variable bPostProcessing is set. */ + if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) { + rtlhal->set_fwcmd_inprogress = true; + /* Update current FW Cmd for callback use. */ + rtlhal->current_fwcmd_io = fw_cmdio; + } else { + return false; + } + + _rtl92s_phy_set_fwcmd_io(hw); + return true; +} + +static void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 delay = 100; + u8 regu1; + + regu1 = rtl_read_byte(rtlpriv, 0x554); + while ((regu1 & BIT(5)) && (delay > 0)) { + regu1 = rtl_read_byte(rtlpriv, 0x554); + delay--; + /* We delay only 50us to prevent + * being scheduled out. */ + udelay(50); + } +} + +void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + /* The way to be capable to switch clock request + * when the PG setting does not support clock request. + * This is the backdoor solution to switch clock + * request before ASPM or D3. */ + rtl_write_dword(rtlpriv, 0x540, 0x73c11); + rtl_write_dword(rtlpriv, 0x548, 0x2407c); + + /* Switch EPHY parameter!!!! */ + rtl_write_word(rtlpriv, 0x550, 0x1000); + rtl_write_byte(rtlpriv, 0x554, 0x20); + _rtl92s_phy_check_ephy_switchready(hw); + + rtl_write_word(rtlpriv, 0x550, 0xa0eb); + rtl_write_byte(rtlpriv, 0x554, 0x3e); + _rtl92s_phy_check_ephy_switchready(hw); + + rtl_write_word(rtlpriv, 0x550, 0xff80); + rtl_write_byte(rtlpriv, 0x554, 0x39); + _rtl92s_phy_check_ephy_switchready(hw); + + /* Delay L1 enter time */ + if (ppsc->support_aspm && !ppsc->support_backdoor) + rtl_write_byte(rtlpriv, 0x560, 0x40); + else + rtl_write_byte(rtlpriv, 0x560, 0x00); + +} + +void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8)); +} diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.h b/drivers/net/wireless/rtlwifi/rtl8192se/phy.h new file mode 100644 index 00000000000..37e504af644 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.h @@ -0,0 +1,101 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __RTL92S_PHY_H__ +#define __RTL92S_PHY_H__ + +#define MAX_TXPWR_IDX_NMODE_92S 63 +#define MAX_DOZE_WAITING_TIMES_9x 64 + +/* Channel switch:The size of + * command tables for switch channel */ +#define MAX_PRECMD_CNT 16 +#define MAX_RFDEPENDCMD_CNT 16 +#define MAX_POSTCMD_CNT 16 + +#define RF90_PATH_MAX 4 + +enum version_8192s { + VERSION_8192S_ACUT, + VERSION_8192S_BCUT, + VERSION_8192S_CCUT +}; + +enum swchnlcmd_id { + CMDID_END, + CMDID_SET_TXPOWEROWER_LEVEL, + CMDID_BBREGWRITE10, + CMDID_WRITEPORT_ULONG, + CMDID_WRITEPORT_USHORT, + CMDID_WRITEPORT_UCHAR, + CMDID_RF_WRITEREG, +}; + +struct swchnlcmd { + enum swchnlcmd_id cmdid; + u32 para1; + u32 para2; + u32 msdelay; +}; + +enum baseband_config_type { + /* Radio Path A */ + BASEBAND_CONFIG_PHY_REG = 0, + /* Radio Path B */ + BASEBAND_CONFIG_AGC_TAB = 1, +}; + +#define hal_get_firmwareversion(rtlpriv) \ + (((struct rt_firmware *)(rtlpriv->rtlhal.pfirmware))->firmwareversion) + +u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask); +void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask, + u32 data); +void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation); +u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, + u32 regaddr, u32 bitmask); +void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, + u32 regaddr, u32 bitmask, u32 data); +void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw, + enum nl80211_channel_type ch_type); +u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw); +bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, + enum rf_pwrstate rfpower_state); +bool rtl92s_phy_mac_config(struct ieee80211_hw *hw); +void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw); +bool rtl92s_phy_bb_config(struct ieee80211_hw *hw); +bool rtl92s_phy_rf_config(struct ieee80211_hw *hw); +void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw); +void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel); +bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fwcmd_io); +void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw); +void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 beaconinterval); +u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) ; + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h new file mode 100644 index 00000000000..0116eaddbfa --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h @@ -0,0 +1,1188 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __REALTEK_92S_REG_H__ +#define __REALTEK_92S_REG_H__ + +/* 1. System Configuration Registers */ +#define REG_SYS_ISO_CTRL 0x0000 +#define REG_SYS_FUNC_EN 0x0002 +#define PMC_FSM 0x0004 +#define SYS_CLKR 0x0008 +#define EPROM_CMD 0x000A +#define EE_VPD 0x000C +#define AFE_MISC 0x0010 +#define SPS0_CTRL 0x0011 +#define SPS1_CTRL 0x0018 +#define RF_CTRL 0x001F +#define LDOA15_CTRL 0x0020 +#define LDOV12D_CTRL 0x0021 +#define LDOHCI12_CTRL 0x0022 +#define LDO_USB_SDIO 0x0023 +#define LPLDO_CTRL 0x0024 +#define AFE_XTAL_CTRL 0x0026 +#define AFE_PLL_CTRL 0x0028 +#define REG_EFUSE_CTRL 0x0030 +#define REG_EFUSE_TEST 0x0034 +#define PWR_DATA 0x0038 +#define DBG_PORT 0x003A +#define DPS_TIMER 0x003C +#define RCLK_MON 0x003E + +/* 2. Command Control Registers */ +#define CMDR 0x0040 +#define TXPAUSE 0x0042 +#define LBKMD_SEL 0x0043 +#define TCR 0x0044 +#define RCR 0x0048 +#define MSR 0x004C +#define SYSF_CFG 0x004D +#define RX_PKY_LIMIT 0x004E +#define MBIDCTRL 0x004F + +/* 3. MACID Setting Registers */ +#define MACIDR 0x0050 +#define MACIDR0 0x0050 +#define MACIDR4 0x0054 +#define BSSIDR 0x0058 +#define HWVID 0x005E +#define MAR 0x0060 +#define MBIDCAMCONTENT 0x0068 +#define MBIDCAMCFG 0x0070 +#define BUILDTIME 0x0074 +#define BUILDUSER 0x0078 + +#define IDR0 MACIDR0 +#define IDR4 MACIDR4 + +/* 4. Timing Control Registers */ +#define TSFR 0x0080 +#define SLOT_TIME 0x0089 +#define USTIME 0x008A +#define SIFS_CCK 0x008C +#define SIFS_OFDM 0x008E +#define PIFS_TIME 0x0090 +#define ACK_TIMEOUT 0x0091 +#define EIFSTR 0x0092 +#define BCN_INTERVAL 0x0094 +#define ATIMWND 0x0096 +#define BCN_DRV_EARLY_INT 0x0098 +#define BCN_DMATIME 0x009A +#define BCN_ERR_THRESH 0x009C +#define MLT 0x009D +#define RSVD_MAC_TUNE_US 0x009E + +/* 5. FIFO Control Registers */ +#define RQPN 0x00A0 +#define RQPN1 0x00A0 +#define RQPN2 0x00A1 +#define RQPN3 0x00A2 +#define RQPN4 0x00A3 +#define RQPN5 0x00A4 +#define RQPN6 0x00A5 +#define RQPN7 0x00A6 +#define RQPN8 0x00A7 +#define RQPN9 0x00A8 +#define RQPN10 0x00A9 +#define LD_RQPN 0x00AB +#define RXFF_BNDY 0x00AC +#define RXRPT_BNDY 0x00B0 +#define TXPKTBUF_PGBNDY 0x00B4 +#define PBP 0x00B5 +#define RXDRVINFO_SZ 0x00B6 +#define TXFF_STATUS 0x00B7 +#define RXFF_STATUS 0x00B8 +#define TXFF_EMPTY_TH 0x00B9 +#define SDIO_RX_BLKSZ 0x00BC +#define RXDMA 0x00BD +#define RXPKT_NUM 0x00BE +#define C2HCMD_UDT_SIZE 0x00C0 +#define C2HCMD_UDT_ADDR 0x00C2 +#define FIFOPAGE1 0x00C4 +#define FIFOPAGE2 0x00C8 +#define FIFOPAGE3 0x00CC +#define FIFOPAGE4 0x00D0 +#define FIFOPAGE5 0x00D4 +#define FW_RSVD_PG_CRTL 0x00D8 +#define RXDMA_AGG_PG_TH 0x00D9 +#define TXDESC_MSK 0x00DC +#define TXRPTFF_RDPTR 0x00E0 +#define TXRPTFF_WTPTR 0x00E4 +#define C2HFF_RDPTR 0x00E8 +#define C2HFF_WTPTR 0x00EC +#define RXFF0_RDPTR 0x00F0 +#define RXFF0_WTPTR 0x00F4 +#define RXFF1_RDPTR 0x00F8 +#define RXFF1_WTPTR 0x00FC +#define RXRPT0_RDPTR 0x0100 +#define RXRPT0_WTPTR 0x0104 +#define RXRPT1_RDPTR 0x0108 +#define RXRPT1_WTPTR 0x010C +#define RX0_UDT_SIZE 0x0110 +#define RX1PKTNUM 0x0114 +#define RXFILTERMAP 0x0116 +#define RXFILTERMAP_GP1 0x0118 +#define RXFILTERMAP_GP2 0x011A +#define RXFILTERMAP_GP3 0x011C +#define BCNQ_CTRL 0x0120 +#define MGTQ_CTRL 0x0124 +#define HIQ_CTRL 0x0128 +#define VOTID7_CTRL 0x012c +#define VOTID6_CTRL 0x0130 +#define VITID5_CTRL 0x0134 +#define VITID4_CTRL 0x0138 +#define BETID3_CTRL 0x013c +#define BETID0_CTRL 0x0140 +#define BKTID2_CTRL 0x0144 +#define BKTID1_CTRL 0x0148 +#define CMDQ_CTRL 0x014c +#define TXPKT_NUM_CTRL 0x0150 +#define TXQ_PGADD 0x0152 +#define TXFF_PG_NUM 0x0154 +#define TRXDMA_STATUS 0x0156 + +/* 6. Adaptive Control Registers */ +#define INIMCS_SEL 0x0160 +#define TX_RATE_REG INIMCS_SEL +#define INIRTSMCS_SEL 0x0180 +#define RRSR 0x0181 +#define ARFR0 0x0184 +#define ARFR1 0x0188 +#define ARFR2 0x018C +#define ARFR3 0x0190 +#define ARFR4 0x0194 +#define ARFR5 0x0198 +#define ARFR6 0x019C +#define ARFR7 0x01A0 +#define AGGLEN_LMT_H 0x01A7 +#define AGGLEN_LMT_L 0x01A8 +#define DARFRC 0x01B0 +#define RARFRC 0x01B8 +#define MCS_TXAGC 0x01C0 +#define CCK_TXAGC 0x01C8 + +/* 7. EDCA Setting Registers */ +#define EDCAPARA_VO 0x01D0 +#define EDCAPARA_VI 0x01D4 +#define EDCAPARA_BE 0x01D8 +#define EDCAPARA_BK 0x01DC +#define BCNTCFG 0x01E0 +#define CWRR 0x01E2 +#define ACMAVG 0x01E4 +#define AcmHwCtrl 0x01E7 +#define VO_ADMTM 0x01E8 +#define VI_ADMTM 0x01EC +#define BE_ADMTM 0x01F0 +#define RETRY_LIMIT 0x01F4 +#define SG_RATE 0x01F6 + +/* 8. WMAC, BA and CCX related Register. */ +#define NAV_CTRL 0x0200 +#define BW_OPMODE 0x0203 +#define BACAMCMD 0x0204 +#define BACAMCONTENT 0x0208 + +/* the 0x2xx register WMAC definition */ +#define LBDLY 0x0210 +#define FWDLY 0x0211 +#define HWPC_RX_CTRL 0x0218 +#define MQIR 0x0220 +#define MAIR 0x0222 +#define MSIR 0x0224 +#define CLM_RESULT 0x0227 +#define NHM_RPI_CNT 0x0228 +#define RXERR_RPT 0x0230 +#define NAV_PROT_LEN 0x0234 +#define CFEND_TH 0x0236 +#define AMPDU_MIN_SPACE 0x0237 +#define TXOP_STALL_CTRL 0x0238 + +/* 9. Security Control Registers */ +#define REG_RWCAM 0x0240 +#define REG_WCAMI 0x0244 +#define REG_RCAMO 0x0248 +#define REG_CAMDBG 0x024C +#define REG_SECR 0x0250 + +/* 10. Power Save Control Registers */ +#define WOW_CTRL 0x0260 +#define PSSTATUS 0x0261 +#define PSSWITCH 0x0262 +#define MIMOPS_WAIT_PERIOD 0x0263 +#define LPNAV_CTRL 0x0264 +#define WFM0 0x0270 +#define WFM1 0x0280 +#define WFM2 0x0290 +#define WFM3 0x02A0 +#define WFM4 0x02B0 +#define WFM5 0x02C0 +#define WFCRC 0x02D0 +#define FW_RPT_REG 0x02c4 + +/* 11. General Purpose Registers */ +#define PSTIME 0x02E0 +#define TIMER0 0x02E4 +#define TIMER1 0x02E8 +#define GPIO_CTRL 0x02EC +#define GPIO_IN 0x02EC +#define GPIO_OUT 0x02ED +#define GPIO_IO_SEL 0x02EE +#define GPIO_MOD 0x02EF +#define GPIO_INTCTRL 0x02F0 +#define MAC_PINMUX_CFG 0x02F1 +#define LEDCFG 0x02F2 +#define PHY_REG 0x02F3 +#define PHY_REG_DATA 0x02F4 +#define REG_EFUSE_CLK 0x02F8 + +/* 12. Host Interrupt Status Registers */ +#define INTA_MASK 0x0300 +#define ISR 0x0308 + +/* 13. Test Mode and Debug Control Registers */ +#define DBG_PORT_SWITCH 0x003A +#define BIST 0x0310 +#define DBS 0x0314 +#define CPUINST 0x0318 +#define CPUCAUSE 0x031C +#define LBUS_ERR_ADDR 0x0320 +#define LBUS_ERR_CMD 0x0324 +#define LBUS_ERR_DATA_L 0x0328 +#define LBUS_ERR_DATA_H 0x032C +#define LX_EXCEPTION_ADDR 0x0330 +#define WDG_CTRL 0x0334 +#define INTMTU 0x0338 +#define INTM 0x033A +#define FDLOCKTURN0 0x033C +#define FDLOCKTURN1 0x033D +#define TRXPKTBUF_DBG_DATA 0x0340 +#define TRXPKTBUF_DBG_CTRL 0x0348 +#define DPLL 0x034A +#define CBUS_ERR_ADDR 0x0350 +#define CBUS_ERR_CMD 0x0354 +#define CBUS_ERR_DATA_L 0x0358 +#define CBUS_ERR_DATA_H 0x035C +#define USB_SIE_INTF_ADDR 0x0360 +#define USB_SIE_INTF_WD 0x0361 +#define USB_SIE_INTF_RD 0x0362 +#define USB_SIE_INTF_CTRL 0x0363 +#define LBUS_MON_ADDR 0x0364 +#define LBUS_ADDR_MASK 0x0368 + +/* Boundary is 0x37F */ + +/* 14. PCIE config register */ +#define TP_POLL 0x0500 +#define PM_CTRL 0x0502 +#define PCIF 0x0503 + +#define THPDA 0x0514 +#define TMDA 0x0518 +#define TCDA 0x051C +#define HDA 0x0520 +#define TVODA 0x0524 +#define TVIDA 0x0528 +#define TBEDA 0x052C +#define TBKDA 0x0530 +#define TBDA 0x0534 +#define RCDA 0x0538 +#define RDQDA 0x053C +#define DBI_WDATA 0x0540 +#define DBI_RDATA 0x0544 +#define DBI_CTRL 0x0548 +#define MDIO_DATA 0x0550 +#define MDIO_CTRL 0x0554 +#define PCI_RPWM 0x0561 +#define PCI_CPWM 0x0563 + +/* Config register (Offset 0x800-) */ +#define PHY_CCA 0x803 + +/* Min Spacing related settings. */ +#define MAX_MSS_DENSITY_2T 0x13 +#define MAX_MSS_DENSITY_1T 0x0A + +/* Rx DMA Control related settings */ +#define RXDMA_AGG_EN BIT(7) + +#define RPWM PCI_RPWM + +/* Regsiter Bit and Content definition */ + +#define ISO_MD2PP BIT(0) +#define ISO_PA2PCIE BIT(3) +#define ISO_PLL2MD BIT(4) +#define ISO_PWC_DV2RP BIT(11) +#define ISO_PWC_RV2RP BIT(12) + + +#define FEN_MREGEN BIT(15) +#define FEN_DCORE BIT(11) +#define FEN_CPUEN BIT(10) + +#define PAD_HWPD_IDN BIT(22) + +#define SYS_CLKSEL_80M BIT(0) +#define SYS_PS_CLKSEL BIT(1) +#define SYS_CPU_CLKSEL BIT(2) +#define SYS_MAC_CLK_EN BIT(11) +#define SYS_SWHW_SEL BIT(14) +#define SYS_FWHW_SEL BIT(15) + +#define CmdEEPROM_En BIT(5) +#define CmdEERPOMSEL BIT(4) +#define Cmd9346CR_9356SEL BIT(4) + +#define AFE_MBEN BIT(1) +#define AFE_BGEN BIT(0) + +#define SPS1_SWEN BIT(1) +#define SPS1_LDEN BIT(0) + +#define RF_EN BIT(0) +#define RF_RSTB BIT(1) +#define RF_SDMRSTB BIT(2) + +#define LDA15_EN BIT(0) + +#define LDV12_EN BIT(0) +#define LDV12_SDBY BIT(1) + +#define XTAL_GATE_AFE BIT(10) + +#define APLL_EN BIT(0) + +#define AFR_CardBEn BIT(0) +#define AFR_CLKRUN_SEL BIT(1) +#define AFR_FuncRegEn BIT(2) + +#define APSDOFF_STATUS BIT(15) +#define APSDOFF BIT(14) +#define BBRSTN BIT(13) +#define BB_GLB_RSTN BIT(12) +#define SCHEDULE_EN BIT(10) +#define MACRXEN BIT(9) +#define MACTXEN BIT(8) +#define DDMA_EN BIT(7) +#define FW2HW_EN BIT(6) +#define RXDMA_EN BIT(5) +#define TXDMA_EN BIT(4) +#define HCI_RXDMA_EN BIT(3) +#define HCI_TXDMA_EN BIT(2) + +#define StopHCCA BIT(6) +#define StopHigh BIT(5) +#define StopMgt BIT(4) +#define StopVO BIT(3) +#define StopVI BIT(2) +#define StopBE BIT(1) +#define StopBK BIT(0) + +#define LBK_NORMAL 0x00 +#define LBK_MAC_LB (BIT(0) | BIT(1) | BIT(3)) +#define LBK_MAC_DLB (BIT(0) | BIT(1)) +#define LBK_DMA_LB (BIT(0) | BIT(1) | BIT(2)) + +#define TCP_OFDL_EN BIT(25) +#define HWPC_TX_EN BIT(24) +#define TXDMAPRE2FULL BIT(23) +#define DISCW BIT(20) +#define TCRICV BIT(19) +#define CfendForm BIT(17) +#define TCRCRC BIT(16) +#define FAKE_IMEM_EN BIT(15) +#define TSFRST BIT(9) +#define TSFEN BIT(8) +#define FWALLRDY (BIT(0) | BIT(1) | BIT(2) | \ + BIT(3) | BIT(4) | BIT(5) | \ + BIT(6) | BIT(7)) +#define FWRDY BIT(7) +#define BASECHG BIT(6) +#define IMEM BIT(5) +#define DMEM_CODE_DONE BIT(4) +#define EXT_IMEM_CHK_RPT BIT(3) +#define EXT_IMEM_CODE_DONE BIT(2) +#define IMEM_CHK_RPT BIT(1) +#define IMEM_CODE_DONE BIT(0) +#define IMEM_CODE_DONE BIT(0) +#define IMEM_CHK_RPT BIT(1) +#define EMEM_CODE_DONE BIT(2) +#define EMEM_CHK_RPT BIT(3) +#define DMEM_CODE_DONE BIT(4) +#define IMEM_RDY BIT(5) +#define BASECHG BIT(6) +#define FWRDY BIT(7) +#define LOAD_FW_READY (IMEM_CODE_DONE | \ + IMEM_CHK_RPT | \ + EMEM_CODE_DONE | \ + EMEM_CHK_RPT | \ + DMEM_CODE_DONE | \ + IMEM_RDY | \ + BASECHG | \ + FWRDY) +#define TCR_TSFEN BIT(8) +#define TCR_TSFRST BIT(9) +#define TCR_FAKE_IMEM_EN BIT(15) +#define TCR_CRC BIT(16) +#define TCR_ICV BIT(19) +#define TCR_DISCW BIT(20) +#define TCR_HWPC_TX_EN BIT(24) +#define TCR_TCP_OFDL_EN BIT(25) +#define TXDMA_INIT_VALUE (IMEM_CHK_RPT | \ + EXT_IMEM_CHK_RPT) + +#define RCR_APPFCS BIT(31) +#define RCR_DIS_ENC_2BYTE BIT(30) +#define RCR_DIS_AES_2BYTE BIT(29) +#define RCR_HTC_LOC_CTRL BIT(28) +#define RCR_ENMBID BIT(27) +#define RCR_RX_TCPOFDL_EN BIT(26) +#define RCR_APP_PHYST_RXFF BIT(25) +#define RCR_APP_PHYST_STAFF BIT(24) +#define RCR_CBSSID BIT(23) +#define RCR_APWRMGT BIT(22) +#define RCR_ADD3 BIT(21) +#define RCR_AMF BIT(20) +#define RCR_ACF BIT(19) +#define RCR_ADF BIT(18) +#define RCR_APP_MIC BIT(17) +#define RCR_APP_ICV BIT(16) +#define RCR_RXFTH BIT(13) +#define RCR_AICV BIT(12) +#define RCR_RXDESC_LK_EN BIT(11) +#define RCR_APP_BA_SSN BIT(6) +#define RCR_ACRC32 BIT(5) +#define RCR_RXSHFT_EN BIT(4) +#define RCR_AB BIT(3) +#define RCR_AM BIT(2) +#define RCR_APM BIT(1) +#define RCR_AAP BIT(0) +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 + + +#define MSR_LINK_MASK ((1 << 0) | (1 << 1)) +#define MSR_LINK_MANAGED 2 +#define MSR_LINK_NONE 0 +#define MSR_LINK_SHIFT 0 +#define MSR_LINK_ADHOC 1 +#define MSR_LINK_MASTER 3 +#define MSR_NOLINK 0x00 +#define MSR_ADHOC 0x01 +#define MSR_INFRA 0x02 +#define MSR_AP 0x03 + +#define ENUART BIT(7) +#define ENJTAG BIT(3) +#define BTMODE (BIT(2) | BIT(1)) +#define ENBT BIT(0) + +#define ENMBID BIT(7) +#define BCNUM (BIT(6) | BIT(5) | BIT(4)) + +#define USTIME_EDCA 0xFF00 +#define USTIME_TSF 0x00FF + +#define SIFS_TRX 0xFF00 +#define SIFS_CTX 0x00FF + +#define ENSWBCN BIT(15) +#define DRVERLY_TU 0x0FF0 +#define DRVERLY_US 0x000F +#define BCN_TCFG_CW_SHIFT 8 +#define BCN_TCFG_IFS 0 + +#define RRSR_RSC_OFFSET 21 +#define RRSR_SHORT_OFFSET 23 +#define RRSR_RSC_BW_40M 0x600000 +#define RRSR_RSC_UPSUBCHNL 0x400000 +#define RRSR_RSC_LOWSUBCHNL 0x200000 +#define RRSR_SHORT 0x800000 +#define RRSR_1M BIT(0) +#define RRSR_2M BIT(1) +#define RRSR_5_5M BIT(2) +#define RRSR_11M BIT(3) +#define RRSR_6M BIT(4) +#define RRSR_9M BIT(5) +#define RRSR_12M BIT(6) +#define RRSR_18M BIT(7) +#define RRSR_24M BIT(8) +#define RRSR_36M BIT(9) +#define RRSR_48M BIT(10) +#define RRSR_54M BIT(11) +#define RRSR_MCS0 BIT(12) +#define RRSR_MCS1 BIT(13) +#define RRSR_MCS2 BIT(14) +#define RRSR_MCS3 BIT(15) +#define RRSR_MCS4 BIT(16) +#define RRSR_MCS5 BIT(17) +#define RRSR_MCS6 BIT(18) +#define RRSR_MCS7 BIT(19) +#define BRSR_AckShortPmb BIT(23) + +#define RATR_1M 0x00000001 +#define RATR_2M 0x00000002 +#define RATR_55M 0x00000004 +#define RATR_11M 0x00000008 +#define RATR_6M 0x00000010 +#define RATR_9M 0x00000020 +#define RATR_12M 0x00000040 +#define RATR_18M 0x00000080 +#define RATR_24M 0x00000100 +#define RATR_36M 0x00000200 +#define RATR_48M 0x00000400 +#define RATR_54M 0x00000800 +#define RATR_MCS0 0x00001000 +#define RATR_MCS1 0x00002000 +#define RATR_MCS2 0x00004000 +#define RATR_MCS3 0x00008000 +#define RATR_MCS4 0x00010000 +#define RATR_MCS5 0x00020000 +#define RATR_MCS6 0x00040000 +#define RATR_MCS7 0x00080000 +#define RATR_MCS8 0x00100000 +#define RATR_MCS9 0x00200000 +#define RATR_MCS10 0x00400000 +#define RATR_MCS11 0x00800000 +#define RATR_MCS12 0x01000000 +#define RATR_MCS13 0x02000000 +#define RATR_MCS14 0x04000000 +#define RATR_MCS15 0x08000000 + +#define RATE_ALL_CCK (RATR_1M | RATR_2M | \ + RATR_55M | RATR_11M) +#define RATE_ALL_OFDM_AG (RATR_6M | RATR_9M | \ + RATR_12M | RATR_18M | \ + RATR_24M | RATR_36M | \ + RATR_48M | RATR_54M) +#define RATE_ALL_OFDM_1SS (RATR_MCS0 | RATR_MCS1 | \ + RATR_MCS2 | RATR_MCS3 | \ + RATR_MCS4 | RATR_MCS5 | \ + RATR_MCS6 | RATR_MCS7) +#define RATE_ALL_OFDM_2SS (RATR_MCS8 | RATR_MCS9 | \ + RATR_MCS10 | RATR_MCS11 | \ + RATR_MCS12 | RATR_MCS13 | \ + RATR_MCS14 | RATR_MCS15) + +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + +#define AcmHw_HwEn BIT(0) +#define AcmHw_BeqEn BIT(1) +#define AcmHw_ViqEn BIT(2) +#define AcmHw_VoqEn BIT(3) +#define AcmHw_BeqStatus BIT(4) +#define AcmHw_ViqStatus BIT(5) +#define AcmHw_VoqStatus BIT(6) + +#define RETRY_LIMIT_SHORT_SHIFT 8 +#define RETRY_LIMIT_LONG_SHIFT 0 + +#define NAV_UPPER_EN BIT(16) +#define NAV_UPPER 0xFF00 +#define NAV_RTSRST 0xFF + +#define BW_OPMODE_20MHZ BIT(2) +#define BW_OPMODE_5G BIT(1) +#define BW_OPMODE_11J BIT(0) + +#define RXERR_RPT_RST BIT(27) +#define RXERR_OFDM_PPDU 0 +#define RXERR_OFDM_FALSE_ALARM 1 +#define RXERR_OFDM_MPDU_OK 2 +#define RXERR_OFDM_MPDU_FAIL 3 +#define RXERR_CCK_PPDU 4 +#define RXERR_CCK_FALSE_ALARM 5 +#define RXERR_CCK_MPDU_OK 6 +#define RXERR_CCK_MPDU_FAIL 7 +#define RXERR_HT_PPDU 8 +#define RXERR_HT_FALSE_ALARM 9 +#define RXERR_HT_MPDU_TOTAL 10 +#define RXERR_HT_MPDU_OK 11 +#define RXERR_HT_MPDU_FAIL 12 +#define RXERR_RX_FULL_DROP 15 + +#define SCR_TXUSEDK BIT(0) +#define SCR_RXUSEDK BIT(1) +#define SCR_TXENCENABLE BIT(2) +#define SCR_RXENCENABLE BIT(3) +#define SCR_SKBYA2 BIT(4) +#define SCR_NOSKMC BIT(5) + +#define CAM_VALID BIT(15) +#define CAM_NOTVALID 0x0000 +#define CAM_USEDK BIT(5) + +#define CAM_NONE 0x0 +#define CAM_WEP40 0x01 +#define CAM_TKIP 0x02 +#define CAM_AES 0x04 +#define CAM_WEP104 0x05 + +#define TOTAL_CAM_ENTRY 32 +#define HALF_CAM_ENTRY 16 + +#define CAM_WRITE BIT(16) +#define CAM_READ 0x00000000 +#define CAM_POLLINIG BIT(31) + +#define WOW_PMEN BIT(0) +#define WOW_WOMEN BIT(1) +#define WOW_MAGIC BIT(2) +#define WOW_UWF BIT(3) + +#define GPIOMUX_EN BIT(3) +#define GPIOSEL_GPIO 0 +#define GPIOSEL_PHYDBG 1 +#define GPIOSEL_BT 2 +#define GPIOSEL_WLANDBG 3 +#define GPIOSEL_GPIO_MASK (~(BIT(0)|BIT(1))) + +#define HST_RDBUSY BIT(0) +#define CPU_WTBUSY BIT(1) + +#define IMR8190_DISABLED 0x0 +#define IMR_CPUERR BIT(5) +#define IMR_ATIMEND BIT(4) +#define IMR_TBDOK BIT(3) +#define IMR_TBDER BIT(2) +#define IMR_BCNDMAINT8 BIT(1) +#define IMR_BCNDMAINT7 BIT(0) +#define IMR_BCNDMAINT6 BIT(31) +#define IMR_BCNDMAINT5 BIT(30) +#define IMR_BCNDMAINT4 BIT(29) +#define IMR_BCNDMAINT3 BIT(28) +#define IMR_BCNDMAINT2 BIT(27) +#define IMR_BCNDMAINT1 BIT(26) +#define IMR_BCNDOK8 BIT(25) +#define IMR_BCNDOK7 BIT(24) +#define IMR_BCNDOK6 BIT(23) +#define IMR_BCNDOK5 BIT(22) +#define IMR_BCNDOK4 BIT(21) +#define IMR_BCNDOK3 BIT(20) +#define IMR_BCNDOK2 BIT(19) +#define IMR_BCNDOK1 BIT(18) +#define IMR_TIMEOUT2 BIT(17) +#define IMR_TIMEOUT1 BIT(16) +#define IMR_TXFOVW BIT(15) +#define IMR_PSTIMEOUT BIT(14) +#define IMR_BCNINT BIT(13) +#define IMR_RXFOVW BIT(12) +#define IMR_RDU BIT(11) +#define IMR_RXCMDOK BIT(10) +#define IMR_BDOK BIT(9) +#define IMR_HIGHDOK BIT(8) +#define IMR_COMDOK BIT(7) +#define IMR_MGNTDOK BIT(6) +#define IMR_HCCADOK BIT(5) +#define IMR_BKDOK BIT(4) +#define IMR_BEDOK BIT(3) +#define IMR_VIDOK BIT(2) +#define IMR_VODOK BIT(1) +#define IMR_ROK BIT(0) + +#define TPPOLL_BKQ BIT(0) +#define TPPOLL_BEQ BIT(1) +#define TPPOLL_VIQ BIT(2) +#define TPPOLL_VOQ BIT(3) +#define TPPOLL_BQ BIT(4) +#define TPPOLL_CQ BIT(5) +#define TPPOLL_MQ BIT(6) +#define TPPOLL_HQ BIT(7) +#define TPPOLL_HCCAQ BIT(8) +#define TPPOLL_STOPBK BIT(9) +#define TPPOLL_STOPBE BIT(10) +#define TPPOLL_STOPVI BIT(11) +#define TPPOLL_STOPVO BIT(12) +#define TPPOLL_STOPMGT BIT(13) +#define TPPOLL_STOPHIGH BIT(14) +#define TPPOLL_STOPHCCA BIT(15) +#define TPPOLL_SHIFT 8 + +#define CCX_CMD_CLM_ENABLE BIT(0) +#define CCX_CMD_NHM_ENABLE BIT(1) +#define CCX_CMD_FUNCTION_ENABLE BIT(8) +#define CCX_CMD_IGNORE_CCA BIT(9) +#define CCX_CMD_IGNORE_TXON BIT(10) +#define CCX_CLM_RESULT_READY BIT(16) +#define CCX_NHM_RESULT_READY BIT(16) +#define CCX_CMD_RESET 0x0 + + +#define HWSET_MAX_SIZE_92S 128 +#define EFUSE_MAX_SECTION 16 +#define EFUSE_REAL_CONTENT_LEN 512 + +#define RTL8190_EEPROM_ID 0x8129 +#define EEPROM_HPON 0x02 +#define EEPROM_CLK 0x06 +#define EEPROM_TESTR 0x08 + +#define EEPROM_VID 0x0A +#define EEPROM_DID 0x0C +#define EEPROM_SVID 0x0E +#define EEPROM_SMID 0x10 + +#define EEPROM_MAC_ADDR 0x12 +#define EEPROM_NODE_ADDRESS_BYTE_0 0x12 + +#define EEPROM_PWDIFF 0x54 + +#define EEPROM_TXPOWERBASE 0x50 +#define EEPROM_TX_PWR_INDEX_RANGE 28 + +#define EEPROM_TX_PWR_HT20_DIFF 0x62 +#define DEFAULT_HT20_TXPWR_DIFF 2 +#define EEPROM_TX_PWR_OFDM_DIFF 0x65 + +#define EEPROM_TXPWRGROUP 0x67 +#define EEPROM_REGULATORY 0x6D + +#define TX_PWR_SAFETY_CHK 0x6D +#define EEPROM_TXPWINDEX_CCK_24G 0x5D +#define EEPROM_TXPWINDEX_OFDM_24G 0x6B +#define EEPROM_HT2T_CH1_A 0x6c +#define EEPROM_HT2T_CH7_A 0x6d +#define EEPROM_HT2T_CH13_A 0x6e +#define EEPROM_HT2T_CH1_B 0x6f +#define EEPROM_HT2T_CH7_B 0x70 +#define EEPROM_HT2T_CH13_B 0x71 + +#define EEPROM_TSSI_A 0x74 +#define EEPROM_TSSI_B 0x75 + +#define EEPROM_RFIND_POWERDIFF 0x76 +#define EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF 0x3 + +#define EEPROM_THERMALMETER 0x77 +#define EEPROM_BLUETOOTH_COEXIST 0x78 +#define EEPROM_BLUETOOTH_TYPE 0x4f + +#define EEPROM_OPTIONAL 0x78 +#define EEPROM_WOWLAN 0x78 + +#define EEPROM_CRYSTALCAP 0x79 +#define EEPROM_CHANNELPLAN 0x7B +#define EEPROM_VERSION 0x7C +#define EEPROM_CUSTOMID 0x7A +#define EEPROM_BOARDTYPE 0x7E + +#define EEPROM_CHANNEL_PLAN_FCC 0x0 +#define EEPROM_CHANNEL_PLAN_IC 0x1 +#define EEPROM_CHANNEL_PLAN_ETSI 0x2 +#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 +#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 +#define EEPROM_CHANNEL_PLAN_MKK 0x5 +#define EEPROM_CHANNEL_PLAN_MKK1 0x6 +#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 +#define EEPROM_CHANNEL_PLAN_TELEC 0x8 +#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 +#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA +#define EEPROM_CHANNEL_PLAN_NCC 0xB +#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 + +#define FW_DIG_DISABLE 0xfd00cc00 +#define FW_DIG_ENABLE 0xfd000000 +#define FW_DIG_HALT 0xfd000001 +#define FW_DIG_RESUME 0xfd000002 +#define FW_HIGH_PWR_DISABLE 0xfd000008 +#define FW_HIGH_PWR_ENABLE 0xfd000009 +#define FW_ADD_A2_ENTRY 0xfd000016 +#define FW_TXPWR_TRACK_ENABLE 0xfd000017 +#define FW_TXPWR_TRACK_DISABLE 0xfd000018 +#define FW_TXPWR_TRACK_THERMAL 0xfd000019 +#define FW_TXANT_SWITCH_ENABLE 0xfd000023 +#define FW_TXANT_SWITCH_DISABLE 0xfd000024 +#define FW_RA_INIT 0xfd000026 +#define FW_CTRL_DM_BY_DRIVER 0Xfd00002a +#define FW_RA_IOT_BG_COMB 0xfd000030 +#define FW_RA_IOT_N_COMB 0xfd000031 +#define FW_RA_REFRESH 0xfd0000a0 +#define FW_RA_UPDATE_MASK 0xfd0000a2 +#define FW_RA_DISABLE 0xfd0000a4 +#define FW_RA_ACTIVE 0xfd0000a6 +#define FW_RA_DISABLE_RSSI_MASK 0xfd0000ac +#define FW_RA_ENABLE_RSSI_MASK 0xfd0000ad +#define FW_RA_RESET 0xfd0000af +#define FW_DM_DISABLE 0xfd00aa00 +#define FW_IQK_ENABLE 0xf0000020 +#define FW_IQK_SUCCESS 0x0000dddd +#define FW_IQK_FAIL 0x0000ffff +#define FW_OP_FAILURE 0xffffffff +#define FW_TX_FEEDBACK_NONE 0xfb000000 +#define FW_TX_FEEDBACK_DTM_ENABLE (FW_TX_FEEDBACK_NONE | 0x1) +#define FW_TX_FEEDBACK_CCX_ENABL (FW_TX_FEEDBACK_NONE | 0x2) +#define FW_BB_RESET_ENABLE 0xff00000d +#define FW_BB_RESET_DISABLE 0xff00000e +#define FW_CCA_CHK_ENABLE 0xff000011 +#define FW_CCK_RESET_CNT 0xff000013 +#define FW_LPS_ENTER 0xfe000010 +#define FW_LPS_LEAVE 0xfe000011 +#define FW_INDIRECT_READ 0xf2000000 +#define FW_INDIRECT_WRITE 0xf2000001 +#define FW_CHAN_SET 0xf3000001 + +#define RFPC 0x5F +#define RCR_9356SEL BIT(6) +#define TCR_LRL_OFFSET 0 +#define TCR_SRL_OFFSET 8 +#define TCR_MXDMA_OFFSET 21 +#define TCR_SAT BIT(24) +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 +#define RCR_OnlyErlPkt BIT(31) +#define CWR 0xDC +#define RETRYCTR 0xDE + +#define CPU_GEN_SYSTEM_RESET 0x00000001 + +#define CCX_COMMAND_REG 0x890 +#define CLM_PERIOD_REG 0x894 +#define NHM_PERIOD_REG 0x896 + +#define NHM_THRESHOLD0 0x898 +#define NHM_THRESHOLD1 0x899 +#define NHM_THRESHOLD2 0x89A +#define NHM_THRESHOLD3 0x89B +#define NHM_THRESHOLD4 0x89C +#define NHM_THRESHOLD5 0x89D +#define NHM_THRESHOLD6 0x89E +#define CLM_RESULT_REG 0x8D0 +#define NHM_RESULT_REG 0x8D4 +#define NHM_RPI_COUNTER0 0x8D8 +#define NHM_RPI_COUNTER1 0x8D9 +#define NHM_RPI_COUNTER2 0x8DA +#define NHM_RPI_COUNTER3 0x8DB +#define NHM_RPI_COUNTER4 0x8DC +#define NHM_RPI_COUNTER5 0x8DD +#define NHM_RPI_COUNTER6 0x8DE +#define NHM_RPI_COUNTER7 0x8DF + +#define HAL_8192S_HW_GPIO_OFF_BIT BIT(3) +#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7 +#define HAL_8192S_HW_GPIO_WPS_BIT BIT(4) + +#define RPMAC_RESET 0x100 +#define RPMAC_TXSTART 0x104 +#define RPMAC_TXLEGACYSIG 0x108 +#define RPMAC_TXHTSIG1 0x10c +#define RPMAC_TXHTSIG2 0x110 +#define RPMAC_PHYDEBUG 0x114 +#define RPMAC_TXPACKETNNM 0x118 +#define RPMAC_TXIDLE 0x11c +#define RPMAC_TXMACHEADER0 0x120 +#define RPMAC_TXMACHEADER1 0x124 +#define RPMAC_TXMACHEADER2 0x128 +#define RPMAC_TXMACHEADER3 0x12c +#define RPMAC_TXMACHEADER4 0x130 +#define RPMAC_TXMACHEADER5 0x134 +#define RPMAC_TXDATATYPE 0x138 +#define RPMAC_TXRANDOMSEED 0x13c +#define RPMAC_CCKPLCPPREAMBLE 0x140 +#define RPMAC_CCKPLCPHEADER 0x144 +#define RPMAC_CCKCRC16 0x148 +#define RPMAC_OFDMRXCRC32OK 0x170 +#define RPMAC_OFDMRXCRC32ER 0x174 +#define RPMAC_OFDMRXPARITYER 0x178 +#define RPMAC_OFDMRXCRC8ER 0x17c +#define RPMAC_CCKCRXRC16ER 0x180 +#define RPMAC_CCKCRXRC32ER 0x184 +#define RPMAC_CCKCRXRC32OK 0x188 +#define RPMAC_TXSTATUS 0x18c + +#define RF_BB_CMD_ADDR 0x02c0 +#define RF_BB_CMD_DATA 0x02c4 + +#define RFPGA0_RFMOD 0x800 + +#define RFPGA0_TXINFO 0x804 +#define RFPGA0_PSDFUNCTION 0x808 + +#define RFPGA0_TXGAINSTAGE 0x80c + +#define RFPGA0_RFTIMING1 0x810 +#define RFPGA0_RFTIMING2 0x814 +#define RFPGA0_XA_HSSIPARAMETER1 0x820 +#define RFPGA0_XA_HSSIPARAMETER2 0x824 +#define RFPGA0_XB_HSSIPARAMETER1 0x828 +#define RFPGA0_XB_HSSIPARAMETER2 0x82c +#define RFPGA0_XC_HSSIPARAMETER1 0x830 +#define RFPGA0_XC_HSSIPARAMETER2 0x834 +#define RFPGA0_XD_HSSIPARAMETER1 0x838 +#define RFPGA0_XD_HSSIPARAMETER2 0x83c +#define RFPGA0_XA_LSSIPARAMETER 0x840 +#define RFPGA0_XB_LSSIPARAMETER 0x844 +#define RFPGA0_XC_LSSIPARAMETER 0x848 +#define RFPGA0_XD_LSSIPARAMETER 0x84c + +#define RFPGA0_RFWAKEUP_PARAMETER 0x850 +#define RFPGA0_RFSLEEPUP_PARAMETER 0x854 + +#define RFPGA0_XAB_SWITCHCONTROL 0x858 +#define RFPGA0_XCD_SWITCHCONTROL 0x85c + +#define RFPGA0_XA_RFINTERFACEOE 0x860 +#define RFPGA0_XB_RFINTERFACEOE 0x864 +#define RFPGA0_XC_RFINTERFACEOE 0x868 +#define RFPGA0_XD_RFINTERFACEOE 0x86c + +#define RFPGA0_XAB_RFINTERFACESW 0x870 +#define RFPGA0_XCD_RFINTERFACESW 0x874 + +#define RFPGA0_XAB_RFPARAMETER 0x878 +#define RFPGA0_XCD_RFPARAMETER 0x87c + +#define RFPGA0_ANALOGPARAMETER1 0x880 +#define RFPGA0_ANALOGPARAMETER2 0x884 +#define RFPGA0_ANALOGPARAMETER3 0x888 +#define RFPGA0_ANALOGPARAMETER4 0x88c + +#define RFPGA0_XA_LSSIREADBACK 0x8a0 +#define RFPGA0_XB_LSSIREADBACK 0x8a4 +#define RFPGA0_XC_LSSIREADBACK 0x8a8 +#define RFPGA0_XD_LSSIREADBACK 0x8ac + +#define RFPGA0_PSDREPORT 0x8b4 +#define TRANSCEIVERA_HSPI_READBACK 0x8b8 +#define TRANSCEIVERB_HSPI_READBACK 0x8bc +#define RFPGA0_XAB_RFINTERFACERB 0x8e0 +#define RFPGA0_XCD_RFINTERFACERB 0x8e4 +#define RFPGA1_RFMOD 0x900 + +#define RFPGA1_TXBLOCK 0x904 +#define RFPGA1_DEBUGSELECT 0x908 +#define RFPGA1_TXINFO 0x90c + +#define RCCK0_SYSTEM 0xa00 + +#define RCCK0_AFESETTING 0xa04 +#define RCCK0_CCA 0xa08 + +#define RCCK0_RXAGC1 0xa0c +#define RCCK0_RXAGC2 0xa10 + +#define RCCK0_RXHP 0xa14 + +#define RCCK0_DSPPARAMETER1 0xa18 +#define RCCK0_DSPPARAMETER2 0xa1c + +#define RCCK0_TXFILTER1 0xa20 +#define RCCK0_TXFILTER2 0xa24 +#define RCCK0_DEBUGPORT 0xa28 +#define RCCK0_FALSEALARMREPORT 0xa2c +#define RCCK0_TRSSIREPORT 0xa50 +#define RCCK0_RXREPORT 0xa54 +#define RCCK0_FACOUNTERLOWER 0xa5c +#define RCCK0_FACOUNTERUPPER 0xa58 + +#define ROFDM0_LSTF 0xc00 + +#define ROFDM0_TRXPATHENABLE 0xc04 +#define ROFDM0_TRMUXPAR 0xc08 +#define ROFDM0_TRSWISOLATION 0xc0c + +#define ROFDM0_XARXAFE 0xc10 +#define ROFDM0_XARXIQIMBALANCE 0xc14 +#define ROFDM0_XBRXAFE 0xc18 +#define ROFDM0_XBRXIQIMBALANCE 0xc1c +#define ROFDM0_XCRXAFE 0xc20 +#define ROFDM0_XCRXIQIMBALANCE 0xc24 +#define ROFDM0_XDRXAFE 0xc28 +#define ROFDM0_XDRXIQIMBALANCE 0xc2c + +#define ROFDM0_RXDETECTOR1 0xc30 +#define ROFDM0_RXDETECTOR2 0xc34 +#define ROFDM0_RXDETECTOR3 0xc38 +#define ROFDM0_RXDETECTOR4 0xc3c + +#define ROFDM0_RXDSP 0xc40 +#define ROFDM0_CFO_AND_DAGC 0xc44 +#define ROFDM0_CCADROP_THRESHOLD 0xc48 +#define ROFDM0_ECCA_THRESHOLD 0xc4c + +#define ROFDM0_XAAGCCORE1 0xc50 +#define ROFDM0_XAAGCCORE2 0xc54 +#define ROFDM0_XBAGCCORE1 0xc58 +#define ROFDM0_XBAGCCORE2 0xc5c +#define ROFDM0_XCAGCCORE1 0xc60 +#define ROFDM0_XCAGCCORE2 0xc64 +#define ROFDM0_XDAGCCORE1 0xc68 +#define ROFDM0_XDAGCCORE2 0xc6c + +#define ROFDM0_AGCPARAMETER1 0xc70 +#define ROFDM0_AGCPARAMETER2 0xc74 +#define ROFDM0_AGCRSSITABLE 0xc78 +#define ROFDM0_HTSTFAGC 0xc7c + +#define ROFDM0_XATXIQIMBALANCE 0xc80 +#define ROFDM0_XATXAFE 0xc84 +#define ROFDM0_XBTXIQIMBALANCE 0xc88 +#define ROFDM0_XBTXAFE 0xc8c +#define ROFDM0_XCTXIQIMBALANCE 0xc90 +#define ROFDM0_XCTXAFE 0xc94 +#define ROFDM0_XDTXIQIMBALANCE 0xc98 +#define ROFDM0_XDTXAFE 0xc9c + +#define ROFDM0_RXHP_PARAMETER 0xce0 +#define ROFDM0_TXPSEUDO_NOISE_WGT 0xce4 +#define ROFDM0_FRAME_SYNC 0xcf0 +#define ROFDM0_DFSREPORT 0xcf4 +#define ROFDM0_TXCOEFF1 0xca4 +#define ROFDM0_TXCOEFF2 0xca8 +#define ROFDM0_TXCOEFF3 0xcac +#define ROFDM0_TXCOEFF4 0xcb0 +#define ROFDM0_TXCOEFF5 0xcb4 +#define ROFDM0_TXCOEFF6 0xcb8 + + +#define ROFDM1_LSTF 0xd00 +#define ROFDM1_TRXPATHENABLE 0xd04 + +#define ROFDM1_CFO 0xd08 +#define ROFDM1_CSI1 0xd10 +#define ROFDM1_SBD 0xd14 +#define ROFDM1_CSI2 0xd18 +#define ROFDM1_CFOTRACKING 0xd2c +#define ROFDM1_TRXMESAURE1 0xd34 +#define ROFDM1_INTF_DET 0xd3c +#define ROFDM1_PSEUDO_NOISESTATEAB 0xd50 +#define ROFDM1_PSEUDO_NOISESTATECD 0xd54 +#define ROFDM1_RX_PSEUDO_NOISE_WGT 0xd58 + +#define ROFDM_PHYCOUNTER1 0xda0 +#define ROFDM_PHYCOUNTER2 0xda4 +#define ROFDM_PHYCOUNTER3 0xda8 + +#define ROFDM_SHORT_CFOAB 0xdac +#define ROFDM_SHORT_CFOCD 0xdb0 +#define ROFDM_LONG_CFOAB 0xdb4 +#define ROFDM_LONG_CFOCD 0xdb8 +#define ROFDM_TAIL_CFOAB 0xdbc +#define ROFDM_TAIL_CFOCD 0xdc0 +#define ROFDM_PW_MEASURE1 0xdc4 +#define ROFDM_PW_MEASURE2 0xdc8 +#define ROFDM_BW_REPORT 0xdcc +#define ROFDM_AGC_REPORT 0xdd0 +#define ROFDM_RXSNR 0xdd4 +#define ROFDM_RXEVMCSI 0xdd8 +#define ROFDM_SIG_REPORT 0xddc + + +#define RTXAGC_RATE18_06 0xe00 +#define RTXAGC_RATE54_24 0xe04 +#define RTXAGC_CCK_MCS32 0xe08 +#define RTXAGC_MCS03_MCS00 0xe10 +#define RTXAGC_MCS07_MCS04 0xe14 +#define RTXAGC_MCS11_MCS08 0xe18 +#define RTXAGC_MCS15_MCS12 0xe1c + + +#define RF_AC 0x00 +#define RF_IQADJ_G1 0x01 +#define RF_IQADJ_G2 0x02 +#define RF_POW_TRSW 0x05 +#define RF_GAIN_RX 0x06 +#define RF_GAIN_TX 0x07 +#define RF_TXM_IDAC 0x08 +#define RF_BS_IQGEN 0x0F + +#define RF_MODE1 0x10 +#define RF_MODE2 0x11 +#define RF_RX_AGC_HP 0x12 +#define RF_TX_AGC 0x13 +#define RF_BIAS 0x14 +#define RF_IPA 0x15 +#define RF_POW_ABILITY 0x17 +#define RF_MODE_AG 0x18 +#define RF_CHANNEL 0x18 +#define RF_CHNLBW 0x18 +#define RF_TOP 0x19 +#define RF_RX_G1 0x1A +#define RF_RX_G2 0x1B +#define RF_RX_BB2 0x1C +#define RF_RX_BB1 0x1D +#define RF_RCK1 0x1E +#define RF_RCK2 0x1F + +#define RF_TX_G1 0x20 +#define RF_TX_G2 0x21 +#define RF_TX_G3 0x22 +#define RF_TX_BB1 0x23 +#define RF_T_METER 0x24 +#define RF_SYN_G1 0x25 +#define RF_SYN_G2 0x26 +#define RF_SYN_G3 0x27 +#define RF_SYN_G4 0x28 +#define RF_SYN_G5 0x29 +#define RF_SYN_G6 0x2A +#define RF_SYN_G7 0x2B +#define RF_SYN_G8 0x2C + +#define RF_RCK_OS 0x30 +#define RF_TXPA_G1 0x31 +#define RF_TXPA_G2 0x32 +#define RF_TXPA_G3 0x33 + +#define BRFMOD 0x1 +#define BCCKEN 0x1000000 +#define BOFDMEN 0x2000000 + +#define BXBTXAGC 0xf00 +#define BXCTXAGC 0xf000 +#define BXDTXAGC 0xf0000 + +#define B3WIRE_DATALENGTH 0x800 +#define B3WIRE_ADDRESSLENGTH 0x400 + +#define BRFSI_RFENV 0x10 + +#define BLSSI_READADDRESS 0x7f800000 +#define BLSSI_READEDGE 0x80000000 +#define BLSSI_READBACK_DATA 0xfffff + +#define BADCLKPHASE 0x4000000 + +#define BCCK_SIDEBAND 0x10 + +#define BTX_AGCRATECCK 0x7f00 + +#define MASKBYTE0 0xff +#define MASKBYTE1 0xff00 +#define MASKBYTE2 0xff0000 +#define MASKBYTE3 0xff000000 +#define MASKHWORD 0xffff0000 +#define MASKLWORD 0x0000ffff +#define MASKDWORD 0xffffffff + +#define MAKS12BITS 0xfffff +#define MASK20BITS 0xfffff +#define RFREG_OFFSET_MASK 0xfffff + +#endif diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c new file mode 100644 index 00000000000..1d3a4833039 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c @@ -0,0 +1,546 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "rf.h" +#include "dm.h" + + +static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel, + u8 chnl, u32 *ofdmbase, u32 *mcsbase, + u8 *p_final_pwridx) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u32 pwrbase0, pwrbase1; + u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0; + u8 i, pwrlevel[4]; + + for (i = 0; i < 2; i++) + pwrlevel[i] = p_pwrlevel[i]; + + /* We only care about the path A for legacy. */ + if (rtlefuse->eeprom_version < 2) { + pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf); + } else if (rtlefuse->eeprom_version >= 2) { + legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff + [RF90_PATH_A][chnl - 1]; + + /* For legacy OFDM, tx pwr always > HT OFDM pwr. + * We do not care Path B + * legacy OFDM pwr diff. NO BB register + * to notify HW. */ + pwrbase0 = pwrlevel[0] + legacy_pwrdiff; + } + + pwrbase0 = (pwrbase0 << 24) | (pwrbase0 << 16) | (pwrbase0 << 8) | + pwrbase0; + *ofdmbase = pwrbase0; + + /* MCS rates */ + if (rtlefuse->eeprom_version >= 2) { + /* Check HT20 to HT40 diff */ + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) { + for (i = 0; i < 2; i++) { + /* rf-A, rf-B */ + /* HT 20<->40 pwr diff */ + ht20_pwrdiff = rtlefuse->txpwr_ht20diff + [i][chnl - 1]; + + if (ht20_pwrdiff < 8) /* 0~+7 */ + pwrlevel[i] += ht20_pwrdiff; + else /* index8-15=-8~-1 */ + pwrlevel[i] -= (16 - ht20_pwrdiff); + } + } + } + + /* use index of rf-A */ + pwrbase1 = pwrlevel[0]; + pwrbase1 = (pwrbase1 << 24) | (pwrbase1 << 16) | (pwrbase1 << 8) | + pwrbase1; + *mcsbase = pwrbase1; + + /* The following is for Antenna + * diff from Ant-B to Ant-A */ + p_final_pwridx[0] = pwrlevel[0]; + p_final_pwridx[1] = pwrlevel[1]; + + switch (rtlefuse->eeprom_regulatory) { + case 3: + /* The following is for calculation + * of the power diff for Ant-B to Ant-A. */ + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) { + p_final_pwridx[0] += rtlefuse->pwrgroup_ht40 + [RF90_PATH_A][ + chnl - 1]; + p_final_pwridx[1] += rtlefuse->pwrgroup_ht40 + [RF90_PATH_B][ + chnl - 1]; + } else { + p_final_pwridx[0] += rtlefuse->pwrgroup_ht20 + [RF90_PATH_A][ + chnl - 1]; + p_final_pwridx[1] += rtlefuse->pwrgroup_ht20 + [RF90_PATH_B][ + chnl - 1]; + } + break; + default: + break; + } + + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) { + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("40MHz finalpwr_idx " + "(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0], + p_final_pwridx[1])); + } else { + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("20MHz finalpwr_idx " + "(A / B) = 0x%x / 0x%x\n", p_final_pwridx[0], + p_final_pwridx[1])); + } +} + +static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw, + u8 *p_final_pwridx) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + char ant_pwr_diff = 0; + u32 u4reg_val = 0; + + if (rtlphy->rf_type == RF_2T2R) { + ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0]; + + /* range is from 7~-8, + * index = 0x0~0xf */ + if (ant_pwr_diff > 7) + ant_pwr_diff = 7; + if (ant_pwr_diff < -8) + ant_pwr_diff = -8; + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Antenna Diff from RF-B " + "to RF-A = %d (0x%x)\n", ant_pwr_diff, + ant_pwr_diff & 0xf)); + + ant_pwr_diff &= 0xf; + } + + /* Antenna TX power difference */ + rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */ + rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */ + rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff); /* RF-B */ + + u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 | + rtlefuse->antenna_txpwdiff[1] << 4 | + rtlefuse->antenna_txpwdiff[0]; + + rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC), + u4reg_val); + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Write BCD-Diff(0x%x) = 0x%x\n", + RFPGA0_TXGAINSTAGE, u4reg_val)); +} + +static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw, + u8 chnl, u8 index, + u32 pwrbase0, + u32 pwrbase1, + u32 *p_outwrite_val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 i, chnlgroup, pwrdiff_limit[4]; + u32 writeval, customer_limit; + + /* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */ + switch (rtlefuse->eeprom_regulatory) { + case 0: + /* Realtek better performance increase power diff + * defined by Realtek for large power */ + chnlgroup = 0; + + writeval = rtlphy->mcs_txpwrlevel_origoffset + [chnlgroup][index] + + ((index < 2) ? pwrbase0 : pwrbase1); + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("RTK better performance, " + "writeval = 0x%x\n", writeval)); + break; + case 1: + /* Realtek regulatory increase power diff defined + * by Realtek for regulatory */ + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) { + writeval = ((index < 2) ? pwrbase0 : pwrbase1); + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Realtek regulatory, " + "40MHz, writeval = 0x%x\n", writeval)); + } else { + if (rtlphy->pwrgroup_cnt == 1) + chnlgroup = 0; + + if (rtlphy->pwrgroup_cnt >= 3) { + if (chnl <= 3) + chnlgroup = 0; + else if (chnl >= 4 && chnl <= 8) + chnlgroup = 1; + else if (chnl > 8) + chnlgroup = 2; + if (rtlphy->pwrgroup_cnt == 4) + chnlgroup++; + } + + writeval = rtlphy->mcs_txpwrlevel_origoffset + [chnlgroup][index] + + ((index < 2) ? + pwrbase0 : pwrbase1); + + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Realtek regulatory, " + "20MHz, writeval = 0x%x\n", writeval)); + } + break; + case 2: + /* Better regulatory don't increase any power diff */ + writeval = ((index < 2) ? pwrbase0 : pwrbase1); + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Better regulatory, " + "writeval = 0x%x\n", writeval)); + break; + case 3: + /* Customer defined power diff. increase power diff + defined by customer. */ + chnlgroup = 0; + + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) { + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("customer's limit, 40MHz = 0x%x\n", + rtlefuse->pwrgroup_ht40 + [RF90_PATH_A][chnl - 1])); + } else { + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("customer's limit, 20MHz = 0x%x\n", + rtlefuse->pwrgroup_ht20 + [RF90_PATH_A][chnl - 1])); + } + + for (i = 0; i < 4; i++) { + pwrdiff_limit[i] = + (u8)((rtlphy->mcs_txpwrlevel_origoffset + [chnlgroup][index] & (0x7f << (i * 8))) + >> (i * 8)); + + if (rtlphy->current_chan_bw == + HT_CHANNEL_WIDTH_20_40) { + if (pwrdiff_limit[i] > + rtlefuse->pwrgroup_ht40 + [RF90_PATH_A][chnl - 1]) { + pwrdiff_limit[i] = + rtlefuse->pwrgroup_ht20 + [RF90_PATH_A][chnl - 1]; + } + } else { + if (pwrdiff_limit[i] > + rtlefuse->pwrgroup_ht20 + [RF90_PATH_A][chnl - 1]) { + pwrdiff_limit[i] = + rtlefuse->pwrgroup_ht20 + [RF90_PATH_A][chnl - 1]; + } + } + } + + customer_limit = (pwrdiff_limit[3] << 24) | + (pwrdiff_limit[2] << 16) | + (pwrdiff_limit[1] << 8) | + (pwrdiff_limit[0]); + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Customer's limit = 0x%x\n", + customer_limit)); + + writeval = customer_limit + ((index < 2) ? + pwrbase0 : pwrbase1); + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("Customer, writeval = " + "0x%x\n", writeval)); + break; + default: + chnlgroup = 0; + writeval = rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index] + + ((index < 2) ? pwrbase0 : pwrbase1); + RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, + ("RTK better performance, " + "writeval = 0x%x\n", writeval)); + break; + } + + if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1) + writeval = 0x10101010; + else if (rtlpriv->dm.dynamic_txhighpower_lvl == + TX_HIGH_PWR_LEVEL_LEVEL2) + writeval = 0x0; + + *p_outwrite_val = writeval; + +} + +static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw, + u8 index, u32 val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c}; + u8 i, rfa_pwr[4]; + u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0; + u32 writeval = val; + + /* If path A and Path B coexist, we must limit Path A tx power. + * Protect Path B pwr over or under flow. We need to calculate + * upper and lower bound of path A tx power. */ + if (rtlphy->rf_type == RF_2T2R) { + rf_pwr_diff = rtlefuse->antenna_txpwdiff[0]; + + /* Diff=-8~-1 */ + if (rf_pwr_diff >= 8) { + /* Prevent underflow!! */ + rfa_lower_bound = 0x10 - rf_pwr_diff; + /* if (rf_pwr_diff >= 0) Diff = 0-7 */ + } else { + rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff; + } + } + + for (i = 0; i < 4; i++) { + rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8)); + if (rfa_pwr[i] > RF6052_MAX_TX_PWR) + rfa_pwr[i] = RF6052_MAX_TX_PWR; + + /* If path A and Path B coexist, we must limit Path A tx power. + * Protect Path B pwr over or under flow. We need to calculate + * upper and lower bound of path A tx power. */ + if (rtlphy->rf_type == RF_2T2R) { + /* Diff=-8~-1 */ + if (rf_pwr_diff >= 8) { + /* Prevent underflow!! */ + if (rfa_pwr[i] < rfa_lower_bound) + rfa_pwr[i] = rfa_lower_bound; + /* Diff = 0-7 */ + } else if (rf_pwr_diff >= 1) { + /* Prevent overflow */ + if (rfa_pwr[i] > rfa_upper_bound) + rfa_pwr[i] = rfa_upper_bound; + } + } + + } + + writeval = (rfa_pwr[3] << 24) | (rfa_pwr[2] << 16) | (rfa_pwr[1] << 8) | + rfa_pwr[0]; + + rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval); +} + +void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw, + u8 *p_pwrlevel, u8 chnl) +{ + u32 writeval, pwrbase0, pwrbase1; + u8 index = 0; + u8 finalpwr_idx[4]; + + _rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1, + &finalpwr_idx[0]); + _rtl92s_set_antennadiff(hw, &finalpwr_idx[0]); + + for (index = 0; index < 6; index++) { + _rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index, + pwrbase0, pwrbase1, &writeval); + + _rtl92s_write_ofdm_powerreg(hw, index, writeval); + } +} + +void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u32 txagc = 0; + bool dont_inc_cck_or_turboscanoff = false; + + if (((rtlefuse->eeprom_version >= 2) && + (rtlefuse->txpwr_safetyflag == 1)) || + ((rtlefuse->eeprom_version >= 2) && + (rtlefuse->eeprom_regulatory != 0))) + dont_inc_cck_or_turboscanoff = true; + + if (mac->act_scanning == true) { + txagc = 0x3f; + if (dont_inc_cck_or_turboscanoff) + txagc = pwrlevel; + } else { + txagc = pwrlevel; + + if (rtlpriv->dm.dynamic_txhighpower_lvl == + TX_HIGH_PWR_LEVEL_LEVEL1) + txagc = 0x10; + else if (rtlpriv->dm.dynamic_txhighpower_lvl == + TX_HIGH_PWR_LEVEL_LEVEL2) + txagc = 0x0; + } + + if (txagc > RF6052_MAX_TX_PWR) + txagc = RF6052_MAX_TX_PWR; + + rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc); + +} + +bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u32 u4reg_val = 0; + u8 rfpath; + bool rtstatus = true; + struct bb_reg_def *pphyreg; + + /* Initialize RF */ + for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) { + + pphyreg = &rtlphy->phyreg_def[rfpath]; + + /* Store original RFENV control type */ + switch (rfpath) { + case RF90_PATH_A: + case RF90_PATH_C: + u4reg_val = rtl92s_phy_query_bb_reg(hw, + pphyreg->rfintfs, + BRFSI_RFENV); + break; + case RF90_PATH_B: + case RF90_PATH_D: + u4reg_val = rtl92s_phy_query_bb_reg(hw, + pphyreg->rfintfs, + BRFSI_RFENV << 16); + break; + } + + /* Set RF_ENV enable */ + rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe, + BRFSI_RFENV << 16, 0x1); + + /* Set RF_ENV output high */ + rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1); + + /* Set bit number of Address and Data for RF register */ + rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2, + B3WIRE_ADDRESSLENGTH, 0x0); + rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2, + B3WIRE_DATALENGTH, 0x0); + + /* Initialize RF fom connfiguration file */ + switch (rfpath) { + case RF90_PATH_A: + rtstatus = rtl92s_phy_config_rf(hw, + (enum radio_path)rfpath); + break; + case RF90_PATH_B: + rtstatus = rtl92s_phy_config_rf(hw, + (enum radio_path)rfpath); + break; + case RF90_PATH_C: + break; + case RF90_PATH_D: + break; + } + + /* Restore RFENV control type */ + switch (rfpath) { + case RF90_PATH_A: + case RF90_PATH_C: + rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV, + u4reg_val); + break; + case RF90_PATH_B: + case RF90_PATH_D: + rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, + BRFSI_RFENV << 16, + u4reg_val); + break; + } + + if (rtstatus != true) { + printk(KERN_ERR "Radio[%d] Fail!!", rfpath); + goto fail; + } + + } + + return rtstatus; + +fail: + return rtstatus; +} + +void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + switch (bandwidth) { + case HT_CHANNEL_WIDTH_20: + rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & + 0xfffff3ff) | 0x0400); + rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, + rtlphy->rfreg_chnlval[0]); + break; + case HT_CHANNEL_WIDTH_20_40: + rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & + 0xfffff3ff)); + rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, + rtlphy->rfreg_chnlval[0]); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("unknown bandwidth: %#X\n", + bandwidth)); + break; + } +} diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.h b/drivers/net/wireless/rtlwifi/rtl8192se/rf.h new file mode 100644 index 00000000000..3843baa1a87 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.h @@ -0,0 +1,43 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __INC_RTL92S_RF_H +#define __INC_RTL92S_RF_H + +#define RF6052_MAX_TX_PWR 0x3F + +void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, + u8 bandwidth); +bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw) ; +void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, + u8 powerlevel); +void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw, + u8 *p_pwrlevel, u8 chnl); + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c new file mode 100644 index 00000000000..1c6cb1d7d66 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c @@ -0,0 +1,423 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include <linux/vmalloc.h> + +#include "../wifi.h" +#include "../core.h" +#include "../pci.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "fw.h" +#include "hw.h" +#include "sw.h" +#include "trx.h" +#include "led.h" + +static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + /*close ASPM for AMD defaultly */ + rtlpci->const_amdpci_aspm = 0; + + /* + * ASPM PS mode. + * 0 - Disable ASPM, + * 1 - Enable ASPM without Clock Req, + * 2 - Enable ASPM with Clock Req, + * 3 - Alwyas Enable ASPM with Clock Req, + * 4 - Always Enable ASPM without Clock Req. + * set defult to RTL8192CE:3 RTL8192E:2 + * */ + rtlpci->const_pci_aspm = 2; + + /*Setting for PCI-E device */ + rtlpci->const_devicepci_aspm_setting = 0x03; + + /*Setting for PCI-E bridge */ + rtlpci->const_hostpci_aspm_setting = 0x02; + + /* + * In Hw/Sw Radio Off situation. + * 0 - Default, + * 1 - From ASPM setting without low Mac Pwr, + * 2 - From ASPM setting with low Mac Pwr, + * 3 - Bus D3 + * set default to RTL8192CE:0 RTL8192SE:2 + */ + rtlpci->const_hwsw_rfoff_d3 = 2; + + /* + * This setting works for those device with + * backdoor ASPM setting such as EPHY setting. + * 0 - Not support ASPM, + * 1 - Support ASPM, + * 2 - According to chipset. + */ + rtlpci->const_support_pciaspm = 2; +} + +static int rtl92s_init_sw_vars(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + const struct firmware *firmware; + struct rt_firmware *pfirmware = NULL; + int err = 0; + u16 earlyrxthreshold = 7; + + rtlpriv->dm.dm_initialgain_enable = 1; + rtlpriv->dm.dm_flag = 0; + rtlpriv->dm.disable_framebursting = 0; + rtlpriv->dm.thermalvalue = 0; + rtlpriv->dm.useramask = true; + + /* compatible 5G band 91se just 2.4G band & smsp */ + rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G; + rtlpriv->rtlhal.bandset = BAND_ON_2_4G; + rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY; + + rtlpci->transmit_config = 0; + + rtlpci->receive_config = + RCR_APPFCS | + RCR_APWRMGT | + /*RCR_ADD3 |*/ + RCR_AMF | + RCR_ADF | + RCR_APP_MIC | + RCR_APP_ICV | + RCR_AICV | + /* Accept ICV error, CRC32 Error */ + RCR_ACRC32 | + RCR_AB | + /* Accept Broadcast, Multicast */ + RCR_AM | + /* Accept Physical match */ + RCR_APM | + /* Accept Destination Address packets */ + /*RCR_AAP |*/ + RCR_APP_PHYST_STAFF | + /* Accept PHY status */ + RCR_APP_PHYST_RXFF | + (earlyrxthreshold << RCR_FIFO_OFFSET); + + rtlpci->irq_mask[0] = (u32) + (IMR_ROK | + IMR_VODOK | + IMR_VIDOK | + IMR_BEDOK | + IMR_BKDOK | + IMR_HCCADOK | + IMR_MGNTDOK | + IMR_COMDOK | + IMR_HIGHDOK | + IMR_BDOK | + IMR_RXCMDOK | + /*IMR_TIMEOUT0 |*/ + IMR_RDU | + IMR_RXFOVW | + IMR_BCNINT + /*| IMR_TXFOVW*/ + /*| IMR_TBDOK | + IMR_TBDER*/); + + rtlpci->irq_mask[1] = (u32) 0; + + rtlpci->shortretry_limit = 0x30; + rtlpci->longretry_limit = 0x30; + + rtlpci->first_init = true; + + /* for LPS & IPS */ + rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps; + rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps; + rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps; + rtlpriv->psc.reg_fwctrl_lps = 3; + rtlpriv->psc.reg_max_lps_awakeintvl = 5; + /* for ASPM, you can close aspm through + * set const_support_pciaspm = 0 */ + rtl92s_init_aspm_vars(hw); + + if (rtlpriv->psc.reg_fwctrl_lps == 1) + rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 2) + rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 3) + rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE; + + /* for firmware buf */ + rtlpriv->rtlhal.pfirmware = vzalloc(sizeof(struct rt_firmware)); + if (!rtlpriv->rtlhal.pfirmware) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Can't alloc buffer for fw.\n")); + return 1; + } + + printk(KERN_INFO "rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE\n" + " Loading firmware %s\n", rtlpriv->cfg->fw_name); + /* request fw */ + err = request_firmware(&firmware, rtlpriv->cfg->fw_name, + rtlpriv->io.dev); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Failed to request firmware!\n")); + return 1; + } + if (firmware->size > sizeof(struct rt_firmware)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Firmware is too big!\n")); + release_firmware(firmware); + return 1; + } + + pfirmware = (struct rt_firmware *)rtlpriv->rtlhal.pfirmware; + memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size); + pfirmware->sz_fw_tmpbufferlen = firmware->size; + release_firmware(firmware); + + return err; +} + +static void rtl92s_deinit_sw_vars(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->rtlhal.pfirmware) { + vfree(rtlpriv->rtlhal.pfirmware); + rtlpriv->rtlhal.pfirmware = NULL; + } +} + +static struct rtl_hal_ops rtl8192se_hal_ops = { + .init_sw_vars = rtl92s_init_sw_vars, + .deinit_sw_vars = rtl92s_deinit_sw_vars, + .read_eeprom_info = rtl92se_read_eeprom_info, + .interrupt_recognized = rtl92se_interrupt_recognized, + .hw_init = rtl92se_hw_init, + .hw_disable = rtl92se_card_disable, + .hw_suspend = rtl92se_suspend, + .hw_resume = rtl92se_resume, + .enable_interrupt = rtl92se_enable_interrupt, + .disable_interrupt = rtl92se_disable_interrupt, + .set_network_type = rtl92se_set_network_type, + .set_chk_bssid = rtl92se_set_check_bssid, + .set_qos = rtl92se_set_qos, + .set_bcn_reg = rtl92se_set_beacon_related_registers, + .set_bcn_intv = rtl92se_set_beacon_interval, + .update_interrupt_mask = rtl92se_update_interrupt_mask, + .get_hw_reg = rtl92se_get_hw_reg, + .set_hw_reg = rtl92se_set_hw_reg, + .update_rate_tbl = rtl92se_update_hal_rate_tbl, + .fill_tx_desc = rtl92se_tx_fill_desc, + .fill_tx_cmddesc = rtl92se_tx_fill_cmddesc, + .query_rx_desc = rtl92se_rx_query_desc, + .set_channel_access = rtl92se_update_channel_access_setting, + .radio_onoff_checking = rtl92se_gpio_radio_on_off_checking, + .set_bw_mode = rtl92s_phy_set_bw_mode, + .switch_channel = rtl92s_phy_sw_chnl, + .dm_watchdog = rtl92s_dm_watchdog, + .scan_operation_backup = rtl92s_phy_scan_operation_backup, + .set_rf_power_state = rtl92s_phy_set_rf_power_state, + .led_control = rtl92se_led_control, + .set_desc = rtl92se_set_desc, + .get_desc = rtl92se_get_desc, + .tx_polling = rtl92se_tx_polling, + .enable_hw_sec = rtl92se_enable_hw_security_config, + .set_key = rtl92se_set_key, + .init_sw_leds = rtl92se_init_sw_leds, + .get_bbreg = rtl92s_phy_query_bb_reg, + .set_bbreg = rtl92s_phy_set_bb_reg, + .get_rfreg = rtl92s_phy_query_rf_reg, + .set_rfreg = rtl92s_phy_set_rf_reg, +}; + +static struct rtl_mod_params rtl92se_mod_params = { + .sw_crypto = false, + .inactiveps = true, + .swctrl_lps = true, + .fwctrl_lps = false, +}; + +/* Because memory R/W bursting will cause system hang/crash + * for 92se, so we don't read back after every write action */ +static struct rtl_hal_cfg rtl92se_hal_cfg = { + .bar_id = 1, + .write_readback = false, + .name = "rtl92s_pci", + .fw_name = "rtlwifi/rtl8192sefw.bin", + .ops = &rtl8192se_hal_ops, + .mod_params = &rtl92se_mod_params, + + .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL, + .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN, + .maps[SYS_CLK] = SYS_CLKR, + .maps[MAC_RCR_AM] = RCR_AM, + .maps[MAC_RCR_AB] = RCR_AB, + .maps[MAC_RCR_ACRC32] = RCR_ACRC32, + .maps[MAC_RCR_ACF] = RCR_ACF, + .maps[MAC_RCR_AAP] = RCR_AAP, + + .maps[EFUSE_TEST] = REG_EFUSE_TEST, + .maps[EFUSE_CTRL] = REG_EFUSE_CTRL, + .maps[EFUSE_CLK] = REG_EFUSE_CLK, + .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL, + .maps[EFUSE_PWC_EV12V] = 0, /* nouse for 8192se */ + .maps[EFUSE_FEN_ELDR] = 0, /* nouse for 8192se */ + .maps[EFUSE_LOADER_CLK_EN] = 0,/* nouse for 8192se */ + .maps[EFUSE_ANA8M] = EFUSE_ANA8M, + .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE_92S, + .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION, + .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN, + + .maps[RWCAM] = REG_RWCAM, + .maps[WCAMI] = REG_WCAMI, + .maps[RCAMO] = REG_RCAMO, + .maps[CAMDBG] = REG_CAMDBG, + .maps[SECR] = REG_SECR, + .maps[SEC_CAM_NONE] = CAM_NONE, + .maps[SEC_CAM_WEP40] = CAM_WEP40, + .maps[SEC_CAM_TKIP] = CAM_TKIP, + .maps[SEC_CAM_AES] = CAM_AES, + .maps[SEC_CAM_WEP104] = CAM_WEP104, + + .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6, + .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5, + .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4, + .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3, + .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2, + .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1, + .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, + .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7, + .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6, + .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5, + .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4, + .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3, + .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2, + .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1, + .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2, + .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1, + + .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW, + .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT, + .maps[RTL_IMR_BcnInt] = IMR_BCNINT, + .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW, + .maps[RTL_IMR_RDU] = IMR_RDU, + .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND, + .maps[RTL_IMR_BDOK] = IMR_BDOK, + .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK, + .maps[RTL_IMR_TBDER] = IMR_TBDER, + .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK, + .maps[RTL_IMR_COMDOK] = IMR_COMDOK, + .maps[RTL_IMR_TBDOK] = IMR_TBDOK, + .maps[RTL_IMR_BKDOK] = IMR_BKDOK, + .maps[RTL_IMR_BEDOK] = IMR_BEDOK, + .maps[RTL_IMR_VIDOK] = IMR_VIDOK, + .maps[RTL_IMR_VODOK] = IMR_VODOK, + .maps[RTL_IMR_ROK] = IMR_ROK, + .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER), + + .maps[RTL_RC_CCK_RATE1M] = DESC92S_RATE1M, + .maps[RTL_RC_CCK_RATE2M] = DESC92S_RATE2M, + .maps[RTL_RC_CCK_RATE5_5M] = DESC92S_RATE5_5M, + .maps[RTL_RC_CCK_RATE11M] = DESC92S_RATE11M, + .maps[RTL_RC_OFDM_RATE6M] = DESC92S_RATE6M, + .maps[RTL_RC_OFDM_RATE9M] = DESC92S_RATE9M, + .maps[RTL_RC_OFDM_RATE12M] = DESC92S_RATE12M, + .maps[RTL_RC_OFDM_RATE18M] = DESC92S_RATE18M, + .maps[RTL_RC_OFDM_RATE24M] = DESC92S_RATE24M, + .maps[RTL_RC_OFDM_RATE36M] = DESC92S_RATE36M, + .maps[RTL_RC_OFDM_RATE48M] = DESC92S_RATE48M, + .maps[RTL_RC_OFDM_RATE54M] = DESC92S_RATE54M, + + .maps[RTL_RC_HT_RATEMCS7] = DESC92S_RATEMCS7, + .maps[RTL_RC_HT_RATEMCS15] = DESC92S_RATEMCS15, +}; + +static struct pci_device_id rtl92se_pci_ids[] __devinitdata = { + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8192, rtl92se_hal_cfg)}, + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8171, rtl92se_hal_cfg)}, + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8172, rtl92se_hal_cfg)}, + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8173, rtl92se_hal_cfg)}, + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8174, rtl92se_hal_cfg)}, + {}, +}; + +MODULE_DEVICE_TABLE(pci, rtl92se_pci_ids); + +MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>"); +MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n PCI wireless"); +MODULE_FIRMWARE("rtlwifi/rtl8192sefw.bin"); + +module_param_named(swenc, rtl92se_mod_params.sw_crypto, bool, 0444); +module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444); +module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444); +module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444); +MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n"); +MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n"); +MODULE_PARM_DESC(swlps, "using linked sw control power save (default 1 is " + "open)\n"); + + +static struct pci_driver rtl92se_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl92se_pci_ids, + .probe = rtl_pci_probe, + .remove = rtl_pci_disconnect, + +#ifdef CONFIG_PM + .suspend = rtl_pci_suspend, + .resume = rtl_pci_resume, +#endif + +}; + +static int __init rtl92se_module_init(void) +{ + int ret = 0; + + ret = pci_register_driver(&rtl92se_driver); + if (ret) + RT_ASSERT(false, (": No device found\n")); + + return ret; +} + +static void __exit rtl92se_module_exit(void) +{ + pci_unregister_driver(&rtl92se_driver); +} + +module_init(rtl92se_module_init); +module_exit(rtl92se_module_exit); diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.h b/drivers/net/wireless/rtlwifi/rtl8192se/sw.h new file mode 100644 index 00000000000..fc4eb285a0a --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.h @@ -0,0 +1,36 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + *****************************************************************************/ +#ifndef __REALTEK_PCI92SE_SW_H__ +#define __REALTEK_PCI92SE_SW_H__ + +#define EFUSE_MAX_SECTION 16 + +int rtl92se_init_sw(struct ieee80211_hw *hw); +void rtl92se_deinit_sw(struct ieee80211_hw *hw); +void rtl92se_init_var_map(struct ieee80211_hw *hw); + +#endif diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/table.c b/drivers/net/wireless/rtlwifi/rtl8192se/table.c new file mode 100644 index 00000000000..154185b3969 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/table.c @@ -0,0 +1,634 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + * Created on 2010/ 5/18, 1:41 + *****************************************************************************/ + +#include "table.h" + +u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH] = { + 0x01c, 0x07000000, + 0x800, 0x00040000, + 0x804, 0x00008003, + 0x808, 0x0000fc00, + 0x80c, 0x0000000a, + 0x810, 0x10005088, + 0x814, 0x020c3d10, + 0x818, 0x00200185, + 0x81c, 0x00000000, + 0x820, 0x01000000, + 0x824, 0x00390004, + 0x828, 0x01000000, + 0x82c, 0x00390004, + 0x830, 0x00000004, + 0x834, 0x00690200, + 0x838, 0x00000004, + 0x83c, 0x00690200, + 0x840, 0x00010000, + 0x844, 0x00010000, + 0x848, 0x00000000, + 0x84c, 0x00000000, + 0x850, 0x00000000, + 0x854, 0x00000000, + 0x858, 0x48484848, + 0x85c, 0x65a965a9, + 0x860, 0x0f7f0130, + 0x864, 0x0f7f0130, + 0x868, 0x0f7f0130, + 0x86c, 0x0f7f0130, + 0x870, 0x03000700, + 0x874, 0x03000300, + 0x878, 0x00020002, + 0x87c, 0x004f0201, + 0x880, 0xa8300ac1, + 0x884, 0x00000058, + 0x888, 0x00000008, + 0x88c, 0x00000004, + 0x890, 0x00000000, + 0x894, 0xfffffffe, + 0x898, 0x40302010, + 0x89c, 0x00706050, + 0x8b0, 0x00000000, + 0x8e0, 0x00000000, + 0x8e4, 0x00000000, + 0xe00, 0x30333333, + 0xe04, 0x2a2d2e2f, + 0xe08, 0x00003232, + 0xe10, 0x30333333, + 0xe14, 0x2a2d2e2f, + 0xe18, 0x30333333, + 0xe1c, 0x2a2d2e2f, + 0xe30, 0x01007c00, + 0xe34, 0x01004800, + 0xe38, 0x1000dc1f, + 0xe3c, 0x10008c1f, + 0xe40, 0x021400a0, + 0xe44, 0x281600a0, + 0xe48, 0xf8000001, + 0xe4c, 0x00002910, + 0xe50, 0x01007c00, + 0xe54, 0x01004800, + 0xe58, 0x1000dc1f, + 0xe5c, 0x10008c1f, + 0xe60, 0x021400a0, + 0xe64, 0x281600a0, + 0xe6c, 0x00002910, + 0xe70, 0x31ed92fb, + 0xe74, 0x361536fb, + 0xe78, 0x361536fb, + 0xe7c, 0x361536fb, + 0xe80, 0x361536fb, + 0xe84, 0x000d92fb, + 0xe88, 0x000d92fb, + 0xe8c, 0x31ed92fb, + 0xed0, 0x31ed92fb, + 0xed4, 0x31ed92fb, + 0xed8, 0x000d92fb, + 0xedc, 0x000d92fb, + 0xee0, 0x000d92fb, + 0xee4, 0x015e5448, + 0xee8, 0x21555448, + 0x900, 0x00000000, + 0x904, 0x00000023, + 0x908, 0x00000000, + 0x90c, 0x01121313, + 0xa00, 0x00d047c8, + 0xa04, 0x80ff0008, + 0xa08, 0x8ccd8300, + 0xa0c, 0x2e62120f, + 0xa10, 0x9500bb78, + 0xa14, 0x11144028, + 0xa18, 0x00881117, + 0xa1c, 0x89140f00, + 0xa20, 0x1a1b0000, + 0xa24, 0x090e1317, + 0xa28, 0x00000204, + 0xa2c, 0x10d30000, + 0xc00, 0x40071d40, + 0xc04, 0x00a05633, + 0xc08, 0x000000e4, + 0xc0c, 0x6c6c6c6c, + 0xc10, 0x08800000, + 0xc14, 0x40000100, + 0xc18, 0x08000000, + 0xc1c, 0x40000100, + 0xc20, 0x08000000, + 0xc24, 0x40000100, + 0xc28, 0x08000000, + 0xc2c, 0x40000100, + 0xc30, 0x6de9ac44, + 0xc34, 0x469652cf, + 0xc38, 0x49795994, + 0xc3c, 0x0a979764, + 0xc40, 0x1f7c403f, + 0xc44, 0x000100b7, + 0xc48, 0xec020000, + 0xc4c, 0x007f037f, + 0xc50, 0x69543420, + 0xc54, 0x433c0094, + 0xc58, 0x69543420, + 0xc5c, 0x433c0094, + 0xc60, 0x69543420, + 0xc64, 0x433c0094, + 0xc68, 0x69543420, + 0xc6c, 0x433c0094, + 0xc70, 0x2c7f000d, + 0xc74, 0x0186155b, + 0xc78, 0x0000001f, + 0xc7c, 0x00b91612, + 0xc80, 0x40000100, + 0xc84, 0x20f60000, + 0xc88, 0x20000080, + 0xc8c, 0x20200000, + 0xc90, 0x40000100, + 0xc94, 0x00000000, + 0xc98, 0x40000100, + 0xc9c, 0x00000000, + 0xca0, 0x00492492, + 0xca4, 0x00000000, + 0xca8, 0x00000000, + 0xcac, 0x00000000, + 0xcb0, 0x00000000, + 0xcb4, 0x00000000, + 0xcb8, 0x00000000, + 0xcbc, 0x28000000, + 0xcc0, 0x00000000, + 0xcc4, 0x00000000, + 0xcc8, 0x00000000, + 0xccc, 0x00000000, + 0xcd0, 0x00000000, + 0xcd4, 0x00000000, + 0xcd8, 0x64b22427, + 0xcdc, 0x00766932, + 0xce0, 0x00222222, + 0xce4, 0x00000000, + 0xce8, 0x37644302, + 0xcec, 0x2f97d40c, + 0xd00, 0x00000750, + 0xd04, 0x00000403, + 0xd08, 0x0000907f, + 0xd0c, 0x00000001, + 0xd10, 0xa0633333, + 0xd14, 0x33333c63, + 0xd18, 0x6a8f5b6b, + 0xd1c, 0x00000000, + 0xd20, 0x00000000, + 0xd24, 0x00000000, + 0xd28, 0x00000000, + 0xd2c, 0xcc979975, + 0xd30, 0x00000000, + 0xd34, 0x00000000, + 0xd38, 0x00000000, + 0xd3c, 0x00027293, + 0xd40, 0x00000000, + 0xd44, 0x00000000, + 0xd48, 0x00000000, + 0xd50, 0x6437140a, + 0xd54, 0x024dbd02, + 0xd58, 0x00000000, + 0xd5c, 0x30032064, + 0xd60, 0x4653de68, + 0xd64, 0x00518a3c, + 0xd68, 0x00002101, + 0xf14, 0x00000003, + 0xf4c, 0x00000000, + 0xf00, 0x00000300, +}; + +u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH] = { + 0x844, 0xffffffff, 0x00010000, + 0x804, 0x0000000f, 0x00000001, + 0x824, 0x00f0000f, 0x00300004, + 0x82c, 0x00f0000f, 0x00100002, + 0x870, 0x04000000, 0x00000001, + 0x864, 0x00000400, 0x00000000, + 0x878, 0x000f000f, 0x00000002, + 0xe74, 0x0f000000, 0x00000002, + 0xe78, 0x0f000000, 0x00000002, + 0xe7c, 0x0f000000, 0x00000002, + 0xe80, 0x0f000000, 0x00000002, + 0x90c, 0x000000ff, 0x00000011, + 0xc04, 0x000000ff, 0x00000011, + 0xd04, 0x0000000f, 0x00000001, + 0x1f4, 0xffff0000, 0x00007777, + 0x234, 0xf8000000, 0x0000000a, +}; + +u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH] = { + 0x804, 0x0000000f, 0x00000003, + 0x824, 0x00f0000f, 0x00300004, + 0x82c, 0x00f0000f, 0x00300002, + 0x870, 0x04000000, 0x00000001, + 0x864, 0x00000400, 0x00000000, + 0x878, 0x000f000f, 0x00000002, + 0xe74, 0x0f000000, 0x00000002, + 0xe78, 0x0f000000, 0x00000002, + 0xe7c, 0x0f000000, 0x00000002, + 0xe80, 0x0f000000, 0x00000002, + 0x90c, 0x000000ff, 0x00000011, + 0xc04, 0x000000ff, 0x00000033, + 0xd04, 0x0000000f, 0x00000003, + 0x1f4, 0xffff0000, 0x00007777, + 0x234, 0xf8000000, 0x0000000a, +}; + +u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH] = { + 0xe00, 0xffffffff, 0x06090909, + 0xe04, 0xffffffff, 0x00030406, + 0xe08, 0x0000ff00, 0x00000000, + 0xe10, 0xffffffff, 0x0a0c0d0e, + 0xe14, 0xffffffff, 0x04070809, + 0xe18, 0xffffffff, 0x0a0c0d0e, + 0xe1c, 0xffffffff, 0x04070809, + 0xe00, 0xffffffff, 0x04040404, + 0xe04, 0xffffffff, 0x00020204, + 0xe08, 0x0000ff00, 0x00000000, + 0xe10, 0xffffffff, 0x02040404, + 0xe14, 0xffffffff, 0x00000002, + 0xe18, 0xffffffff, 0x02040404, + 0xe1c, 0xffffffff, 0x00000002, + 0xe00, 0xffffffff, 0x04040404, + 0xe04, 0xffffffff, 0x00020204, + 0xe08, 0x0000ff00, 0x00000000, + 0xe10, 0xffffffff, 0x02040404, + 0xe14, 0xffffffff, 0x00000002, + 0xe18, 0xffffffff, 0x02040404, + 0xe1c, 0xffffffff, 0x00000002, + 0xe00, 0xffffffff, 0x02020202, + 0xe04, 0xffffffff, 0x00020202, + 0xe08, 0x0000ff00, 0x00000000, + 0xe10, 0xffffffff, 0x02020202, + 0xe14, 0xffffffff, 0x00000002, + 0xe18, 0xffffffff, 0x02020202, + 0xe1c, 0xffffffff, 0x00000002, +}; + +u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH] = { + 0x000, 0x00030159, + 0x001, 0x00030250, + 0x002, 0x00010000, + 0x010, 0x0008000f, + 0x011, 0x000231fc, + 0x010, 0x000c000f, + 0x011, 0x0003f9f8, + 0x010, 0x0002000f, + 0x011, 0x00020101, + 0x014, 0x0001093e, + 0x014, 0x0009093e, + 0x015, 0x0000f8f4, + 0x017, 0x000f6500, + 0x01a, 0x00013056, + 0x01b, 0x00060000, + 0x01c, 0x00000300, + 0x01e, 0x00031059, + 0x021, 0x00054000, + 0x022, 0x0000083c, + 0x023, 0x00001558, + 0x024, 0x00000060, + 0x025, 0x00022583, + 0x026, 0x0000f200, + 0x027, 0x000eacf1, + 0x028, 0x0009bd54, + 0x029, 0x00004582, + 0x02a, 0x00000001, + 0x02b, 0x00021334, + 0x02a, 0x00000000, + 0x02b, 0x0000000a, + 0x02a, 0x00000001, + 0x02b, 0x00000808, + 0x02b, 0x00053333, + 0x02c, 0x0000000c, + 0x02a, 0x00000002, + 0x02b, 0x00000808, + 0x02b, 0x0005b333, + 0x02c, 0x0000000d, + 0x02a, 0x00000003, + 0x02b, 0x00000808, + 0x02b, 0x00063333, + 0x02c, 0x0000000d, + 0x02a, 0x00000004, + 0x02b, 0x00000808, + 0x02b, 0x0006b333, + 0x02c, 0x0000000d, + 0x02a, 0x00000005, + 0x02b, 0x00000709, + 0x02b, 0x00053333, + 0x02c, 0x0000000d, + 0x02a, 0x00000006, + 0x02b, 0x00000709, + 0x02b, 0x0005b333, + 0x02c, 0x0000000d, + 0x02a, 0x00000007, + 0x02b, 0x00000709, + 0x02b, 0x00063333, + 0x02c, 0x0000000d, + 0x02a, 0x00000008, + 0x02b, 0x00000709, + 0x02b, 0x0006b333, + 0x02c, 0x0000000d, + 0x02a, 0x00000009, + 0x02b, 0x0000060a, + 0x02b, 0x00053333, + 0x02c, 0x0000000d, + 0x02a, 0x0000000a, + 0x02b, 0x0000060a, + 0x02b, 0x0005b333, + 0x02c, 0x0000000d, + 0x02a, 0x0000000b, + 0x02b, 0x0000060a, + 0x02b, 0x00063333, + 0x02c, 0x0000000d, + 0x02a, 0x0000000c, + 0x02b, 0x0000060a, + 0x02b, 0x0006b333, + 0x02c, 0x0000000d, + 0x02a, 0x0000000d, + 0x02b, 0x0000050b, + 0x02b, 0x00053333, + 0x02c, 0x0000000d, + 0x02a, 0x0000000e, + 0x02b, 0x0000050b, + 0x02b, 0x00066623, + 0x02c, 0x0000001a, + 0x02a, 0x000e4000, + 0x030, 0x00020000, + 0x031, 0x000b9631, + 0x032, 0x0000130d, + 0x033, 0x00000187, + 0x013, 0x00019e6c, + 0x013, 0x00015e94, + 0x000, 0x00010159, + 0x018, 0x0000f401, + 0x0fe, 0x00000000, + 0x01e, 0x0003105b, + 0x0fe, 0x00000000, + 0x000, 0x00030159, + 0x010, 0x0004000f, + 0x011, 0x000203f9, +}; + +u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH] = { + 0x000, 0x00030159, + 0x001, 0x00001041, + 0x002, 0x00011000, + 0x005, 0x00080fc0, + 0x007, 0x000fc803, + 0x013, 0x00017cb0, + 0x013, 0x00011cc0, + 0x013, 0x0000dc60, + 0x013, 0x00008c60, + 0x013, 0x00004450, + 0x013, 0x00000020, +}; + +u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH] = { + 0x000, 0x00030159, + 0x001, 0x00001041, + 0x002, 0x00011000, + 0x005, 0x00080fc0, + 0x007, 0x000fc803, +}; + +u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH] = { + 0x020, 0x00000035, + 0x048, 0x0000000e, + 0x049, 0x000000f0, + 0x04a, 0x00000077, + 0x04b, 0x00000083, + 0x0b5, 0x00000021, + 0x0dc, 0x000000ff, + 0x0dd, 0x000000ff, + 0x0de, 0x000000ff, + 0x0df, 0x000000ff, + 0x116, 0x00000000, + 0x117, 0x00000000, + 0x118, 0x00000000, + 0x119, 0x00000000, + 0x11a, 0x00000000, + 0x11b, 0x00000000, + 0x11c, 0x00000000, + 0x11d, 0x00000000, + 0x160, 0x0000000b, + 0x161, 0x0000000b, + 0x162, 0x0000000b, + 0x163, 0x0000000b, + 0x164, 0x0000000b, + 0x165, 0x0000000b, + 0x166, 0x0000000b, + 0x167, 0x0000000b, + 0x168, 0x0000000b, + 0x169, 0x0000000b, + 0x16a, 0x0000000b, + 0x16b, 0x0000000b, + 0x16c, 0x0000000b, + 0x16d, 0x0000000b, + 0x16e, 0x0000000b, + 0x16f, 0x0000000b, + 0x170, 0x0000000b, + 0x171, 0x0000000b, + 0x172, 0x0000000b, + 0x173, 0x0000000b, + 0x174, 0x0000000b, + 0x175, 0x0000000b, + 0x176, 0x0000000b, + 0x177, 0x0000000b, + 0x178, 0x0000000b, + 0x179, 0x0000000b, + 0x17a, 0x0000000b, + 0x17b, 0x0000000b, + 0x17c, 0x0000000b, + 0x17d, 0x0000000b, + 0x17e, 0x0000000b, + 0x17f, 0x0000000b, + 0x236, 0x0000000c, + 0x503, 0x00000022, + 0x560, 0x00000000, +}; + +u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH] = { + 0xc78, 0x7f000001, + 0xc78, 0x7f010001, + 0xc78, 0x7e020001, + 0xc78, 0x7d030001, + 0xc78, 0x7c040001, + 0xc78, 0x7b050001, + 0xc78, 0x7a060001, + 0xc78, 0x79070001, + 0xc78, 0x78080001, + 0xc78, 0x77090001, + 0xc78, 0x760a0001, + 0xc78, 0x750b0001, + 0xc78, 0x740c0001, + 0xc78, 0x730d0001, + 0xc78, 0x720e0001, + 0xc78, 0x710f0001, + 0xc78, 0x70100001, + 0xc78, 0x6f110001, + 0xc78, 0x6f120001, + 0xc78, 0x6e130001, + 0xc78, 0x6d140001, + 0xc78, 0x6d150001, + 0xc78, 0x6c160001, + 0xc78, 0x6b170001, + 0xc78, 0x6a180001, + 0xc78, 0x6a190001, + 0xc78, 0x691a0001, + 0xc78, 0x681b0001, + 0xc78, 0x671c0001, + 0xc78, 0x661d0001, + 0xc78, 0x651e0001, + 0xc78, 0x641f0001, + 0xc78, 0x63200001, + 0xc78, 0x4c210001, + 0xc78, 0x4b220001, + 0xc78, 0x4a230001, + 0xc78, 0x49240001, + 0xc78, 0x48250001, + 0xc78, 0x47260001, + 0xc78, 0x46270001, + 0xc78, 0x45280001, + 0xc78, 0x44290001, + 0xc78, 0x2c2a0001, + 0xc78, 0x2b2b0001, + 0xc78, 0x2a2c0001, + 0xc78, 0x292d0001, + 0xc78, 0x282e0001, + 0xc78, 0x272f0001, + 0xc78, 0x26300001, + 0xc78, 0x25310001, + 0xc78, 0x24320001, + 0xc78, 0x23330001, + 0xc78, 0x22340001, + 0xc78, 0x09350001, + 0xc78, 0x08360001, + 0xc78, 0x07370001, + 0xc78, 0x06380001, + 0xc78, 0x05390001, + 0xc78, 0x043a0001, + 0xc78, 0x033b0001, + 0xc78, 0x023c0001, + 0xc78, 0x013d0001, + 0xc78, 0x003e0001, + 0xc78, 0x003f0001, + 0xc78, 0x7f400001, + 0xc78, 0x7f410001, + 0xc78, 0x7e420001, + 0xc78, 0x7d430001, + 0xc78, 0x7c440001, + 0xc78, 0x7b450001, + 0xc78, 0x7a460001, + 0xc78, 0x79470001, + 0xc78, 0x78480001, + 0xc78, 0x77490001, + 0xc78, 0x764a0001, + 0xc78, 0x754b0001, + 0xc78, 0x744c0001, + 0xc78, 0x734d0001, + 0xc78, 0x724e0001, + 0xc78, 0x714f0001, + 0xc78, 0x70500001, + 0xc78, 0x6f510001, + 0xc78, 0x6f520001, + 0xc78, 0x6e530001, + 0xc78, 0x6d540001, + 0xc78, 0x6d550001, + 0xc78, 0x6c560001, + 0xc78, 0x6b570001, + 0xc78, 0x6a580001, + 0xc78, 0x6a590001, + 0xc78, 0x695a0001, + 0xc78, 0x685b0001, + 0xc78, 0x675c0001, + 0xc78, 0x665d0001, + 0xc78, 0x655e0001, + 0xc78, 0x645f0001, + 0xc78, 0x63600001, + 0xc78, 0x4c610001, + 0xc78, 0x4b620001, + 0xc78, 0x4a630001, + 0xc78, 0x49640001, + 0xc78, 0x48650001, + 0xc78, 0x47660001, + 0xc78, 0x46670001, + 0xc78, 0x45680001, + 0xc78, 0x44690001, + 0xc78, 0x2c6a0001, + 0xc78, 0x2b6b0001, + 0xc78, 0x2a6c0001, + 0xc78, 0x296d0001, + 0xc78, 0x286e0001, + 0xc78, 0x276f0001, + 0xc78, 0x26700001, + 0xc78, 0x25710001, + 0xc78, 0x24720001, + 0xc78, 0x23730001, + 0xc78, 0x22740001, + 0xc78, 0x09750001, + 0xc78, 0x08760001, + 0xc78, 0x07770001, + 0xc78, 0x06780001, + 0xc78, 0x05790001, + 0xc78, 0x047a0001, + 0xc78, 0x037b0001, + 0xc78, 0x027c0001, + 0xc78, 0x017d0001, + 0xc78, 0x007e0001, + 0xc78, 0x007f0001, + 0xc78, 0x3000001e, + 0xc78, 0x3001001e, + 0xc78, 0x3002001e, + 0xc78, 0x3003001e, + 0xc78, 0x3004001e, + 0xc78, 0x3405001e, + 0xc78, 0x3806001e, + 0xc78, 0x3e07001e, + 0xc78, 0x3e08001e, + 0xc78, 0x4409001e, + 0xc78, 0x460a001e, + 0xc78, 0x480b001e, + 0xc78, 0x480c001e, + 0xc78, 0x4e0d001e, + 0xc78, 0x560e001e, + 0xc78, 0x5a0f001e, + 0xc78, 0x5e10001e, + 0xc78, 0x6211001e, + 0xc78, 0x6c12001e, + 0xc78, 0x7213001e, + 0xc78, 0x7214001e, + 0xc78, 0x7215001e, + 0xc78, 0x7216001e, + 0xc78, 0x7217001e, + 0xc78, 0x7218001e, + 0xc78, 0x7219001e, + 0xc78, 0x721a001e, + 0xc78, 0x721b001e, + 0xc78, 0x721c001e, + 0xc78, 0x721d001e, + 0xc78, 0x721e001e, + 0xc78, 0x721f001e, +}; + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/table.h b/drivers/net/wireless/rtlwifi/rtl8192se/table.h new file mode 100644 index 00000000000..b4ed6d951eb --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/table.h @@ -0,0 +1,49 @@ +/****************************************************************************** + * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + ******************************************************************************/ +#ifndef __INC_HAL8192SE_FW_IMG_H +#define __INC_HAL8192SE_FW_IMG_H + +#include <linux/types.h> + +/*Created on 2010/ 4/12, 5:56*/ + +#define PHY_REG_2T2RARRAYLENGTH 372 +extern u32 rtl8192sephy_reg_2t2rarray[PHY_REG_2T2RARRAYLENGTH]; +#define PHY_CHANGETO_1T1RARRAYLENGTH 48 +extern u32 rtl8192sephy_changeto_1t1rarray[PHY_CHANGETO_1T1RARRAYLENGTH]; +#define PHY_CHANGETO_1T2RARRAYLENGTH 45 +extern u32 rtl8192sephy_changeto_1t2rarray[PHY_CHANGETO_1T2RARRAYLENGTH]; +#define PHY_REG_ARRAY_PGLENGTH 84 +extern u32 rtl8192sephy_reg_array_pg[PHY_REG_ARRAY_PGLENGTH]; +#define RADIOA_1T_ARRAYLENGTH 202 +extern u32 rtl8192seradioa_1t_array[RADIOA_1T_ARRAYLENGTH]; +#define RADIOB_ARRAYLENGTH 22 +extern u32 rtl8192seradiob_array[RADIOB_ARRAYLENGTH]; +#define RADIOB_GM_ARRAYLENGTH 10 +extern u32 rtl8192seradiob_gm_array[RADIOB_GM_ARRAYLENGTH]; +#define MAC_2T_ARRAYLENGTH 106 +extern u32 rtl8192semac_2t_array[MAC_2T_ARRAYLENGTH]; +#define AGCTAB_ARRAYLENGTH 320 +extern u32 rtl8192seagctab_array[AGCTAB_ARRAYLENGTH]; + +#endif + diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c new file mode 100644 index 00000000000..5cf442373d4 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -0,0 +1,976 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../pci.h" +#include "../base.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "fw.h" +#include "trx.h" +#include "led.h" + +static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 skb_queue) +{ + __le16 fc = rtl_get_fc(skb); + + if (unlikely(ieee80211_is_beacon(fc))) + return QSLT_BEACON; + if (ieee80211_is_mgmt(fc)) + return QSLT_MGNT; + if (ieee80211_is_nullfunc(fc)) + return QSLT_HIGH; + + return skb->priority; +} + +static int _rtl92se_rate_mapping(bool isht, u8 desc_rate, bool first_ampdu) +{ + int rate_idx = 0; + + if (first_ampdu) { + if (false == isht) { + switch (desc_rate) { + case DESC92S_RATE1M: + rate_idx = 0; + break; + case DESC92S_RATE2M: + rate_idx = 1; + break; + case DESC92S_RATE5_5M: + rate_idx = 2; + break; + case DESC92S_RATE11M: + rate_idx = 3; + break; + case DESC92S_RATE6M: + rate_idx = 4; + break; + case DESC92S_RATE9M: + rate_idx = 5; + break; + case DESC92S_RATE12M: + rate_idx = 6; + break; + case DESC92S_RATE18M: + rate_idx = 7; + break; + case DESC92S_RATE24M: + rate_idx = 8; + break; + case DESC92S_RATE36M: + rate_idx = 9; + break; + case DESC92S_RATE48M: + rate_idx = 10; + break; + case DESC92S_RATE54M: + rate_idx = 11; + break; + default: + rate_idx = 0; + break; + } + } else { + rate_idx = 11; + } + + return rate_idx; + } + + switch (desc_rate) { + case DESC92S_RATE1M: + rate_idx = 0; + break; + case DESC92S_RATE2M: + rate_idx = 1; + break; + case DESC92S_RATE5_5M: + rate_idx = 2; + break; + case DESC92S_RATE11M: + rate_idx = 3; + break; + case DESC92S_RATE6M: + rate_idx = 4; + break; + case DESC92S_RATE9M: + rate_idx = 5; + break; + case DESC92S_RATE12M: + rate_idx = 6; + break; + case DESC92S_RATE18M: + rate_idx = 7; + break; + case DESC92S_RATE24M: + rate_idx = 8; + break; + case DESC92S_RATE36M: + rate_idx = 9; + break; + case DESC92S_RATE48M: + rate_idx = 10; + break; + case DESC92S_RATE54M: + rate_idx = 11; + break; + default: + rate_idx = 11; + break; + } + return rate_idx; +} + +static u8 _rtl92s_query_rxpwrpercentage(char antpower) +{ + if ((antpower <= -100) || (antpower >= 20)) + return 0; + else if (antpower >= 0) + return 100; + else + return 100 + antpower; +} + +static u8 _rtl92s_evm_db_to_percentage(char value) +{ + char ret_val; + ret_val = value; + + if (ret_val >= 0) + ret_val = 0; + + if (ret_val <= -33) + ret_val = -33; + + ret_val = 0 - ret_val; + ret_val *= 3; + + if (ret_val == 99) + ret_val = 100; + + return ret_val; +} + +static long _rtl92se_translate_todbm(struct ieee80211_hw *hw, + u8 signal_strength_index) +{ + long signal_power; + + signal_power = (long)((signal_strength_index + 1) >> 1); + signal_power -= 95; + return signal_power; +} + +static long _rtl92se_signal_scale_mapping(struct ieee80211_hw *hw, + long currsig) +{ + long retsig = 0; + + /* Step 1. Scale mapping. */ + if (currsig > 47) + retsig = 100; + else if (currsig > 14 && currsig <= 47) + retsig = 100 - ((47 - currsig) * 3) / 2; + else if (currsig > 2 && currsig <= 14) + retsig = 48 - ((14 - currsig) * 15) / 7; + else if (currsig >= 0) + retsig = currsig * 9 + 1; + + return retsig; +} + + +static void _rtl92se_query_rxphystatus(struct ieee80211_hw *hw, + struct rtl_stats *pstats, u8 *pdesc, + struct rx_fwinfo *p_drvinfo, + bool packet_match_bssid, + bool packet_toself, + bool packet_beacon) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct phy_sts_cck_8192s_t *cck_buf; + s8 rx_pwr_all = 0, rx_pwr[4]; + u8 rf_rx_num = 0, evm, pwdb_all; + u8 i, max_spatial_stream; + u32 rssi, total_rssi = 0; + bool in_powersavemode = false; + bool is_cck_rate; + + is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc); + pstats->packet_matchbssid = packet_match_bssid; + pstats->packet_toself = packet_toself; + pstats->is_cck = is_cck_rate; + pstats->packet_beacon = packet_beacon; + pstats->is_cck = is_cck_rate; + pstats->rx_mimo_signalquality[0] = -1; + pstats->rx_mimo_signalquality[1] = -1; + + if (is_cck_rate) { + u8 report, cck_highpwr; + cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo; + + if (!in_powersavemode) + cck_highpwr = (u8) rtl_get_bbreg(hw, + RFPGA0_XA_HSSIPARAMETER2, + 0x200); + else + cck_highpwr = false; + + if (!cck_highpwr) { + u8 cck_agc_rpt = cck_buf->cck_agc_rpt; + report = cck_buf->cck_agc_rpt & 0xc0; + report = report >> 6; + switch (report) { + case 0x3: + rx_pwr_all = -40 - (cck_agc_rpt & 0x3e); + break; + case 0x2: + rx_pwr_all = -20 - (cck_agc_rpt & 0x3e); + break; + case 0x1: + rx_pwr_all = -2 - (cck_agc_rpt & 0x3e); + break; + case 0x0: + rx_pwr_all = 14 - (cck_agc_rpt & 0x3e); + break; + } + } else { + u8 cck_agc_rpt = cck_buf->cck_agc_rpt; + report = p_drvinfo->cfosho[0] & 0x60; + report = report >> 5; + switch (report) { + case 0x3: + rx_pwr_all = -40 - ((cck_agc_rpt & 0x1f) << 1); + break; + case 0x2: + rx_pwr_all = -20 - ((cck_agc_rpt & 0x1f) << 1); + break; + case 0x1: + rx_pwr_all = -2 - ((cck_agc_rpt & 0x1f) << 1); + break; + case 0x0: + rx_pwr_all = 14 - ((cck_agc_rpt & 0x1f) << 1); + break; + } + } + + pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all); + + /* CCK gain is smaller than OFDM/MCS gain, */ + /* so we add gain diff by experiences, the val is 6 */ + pwdb_all += 6; + if (pwdb_all > 100) + pwdb_all = 100; + /* modify the offset to make the same gain index with OFDM. */ + if (pwdb_all > 34 && pwdb_all <= 42) + pwdb_all -= 2; + else if (pwdb_all > 26 && pwdb_all <= 34) + pwdb_all -= 6; + else if (pwdb_all > 14 && pwdb_all <= 26) + pwdb_all -= 8; + else if (pwdb_all > 4 && pwdb_all <= 14) + pwdb_all -= 4; + + pstats->rx_pwdb_all = pwdb_all; + pstats->recvsignalpower = rx_pwr_all; + + if (packet_match_bssid) { + u8 sq; + if (pstats->rx_pwdb_all > 40) { + sq = 100; + } else { + sq = cck_buf->sq_rpt; + if (sq > 64) + sq = 0; + else if (sq < 20) + sq = 100; + else + sq = ((64 - sq) * 100) / 44; + } + + pstats->signalquality = sq; + pstats->rx_mimo_signalquality[0] = sq; + pstats->rx_mimo_signalquality[1] = -1; + } + } else { + rtlpriv->dm.rfpath_rxenable[0] = + rtlpriv->dm.rfpath_rxenable[1] = true; + for (i = RF90_PATH_A; i < RF90_PATH_MAX; i++) { + if (rtlpriv->dm.rfpath_rxenable[i]) + rf_rx_num++; + + rx_pwr[i] = ((p_drvinfo->gain_trsw[i] & + 0x3f) * 2) - 110; + rssi = _rtl92s_query_rxpwrpercentage(rx_pwr[i]); + total_rssi += rssi; + rtlpriv->stats.rx_snr_db[i] = + (long)(p_drvinfo->rxsnr[i] / 2); + + if (packet_match_bssid) + pstats->rx_mimo_signalstrength[i] = (u8) rssi; + } + + rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110; + pwdb_all = _rtl92s_query_rxpwrpercentage(rx_pwr_all); + pstats->rx_pwdb_all = pwdb_all; + pstats->rxpower = rx_pwr_all; + pstats->recvsignalpower = rx_pwr_all; + + if (GET_RX_STATUS_DESC_RX_HT(pdesc) && + GET_RX_STATUS_DESC_RX_MCS(pdesc) >= DESC92S_RATEMCS8 && + GET_RX_STATUS_DESC_RX_MCS(pdesc) <= DESC92S_RATEMCS15) + max_spatial_stream = 2; + else + max_spatial_stream = 1; + + for (i = 0; i < max_spatial_stream; i++) { + evm = _rtl92s_evm_db_to_percentage(p_drvinfo->rxevm[i]); + + if (packet_match_bssid) { + if (i == 0) + pstats->signalquality = (u8)(evm & + 0xff); + pstats->rx_mimo_signalquality[i] = + (u8) (evm & 0xff); + } + } + } + + if (is_cck_rate) + pstats->signalstrength = (u8)(_rtl92se_signal_scale_mapping(hw, + pwdb_all)); + else if (rf_rx_num != 0) + pstats->signalstrength = (u8) (_rtl92se_signal_scale_mapping(hw, + total_rssi /= rf_rx_num)); +} + +static void _rtl92se_process_ui_rssi(struct ieee80211_hw *hw, + struct rtl_stats *pstats) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u8 rfpath; + u32 last_rssi, tmpval; + + if (pstats->packet_toself || pstats->packet_beacon) { + rtlpriv->stats.rssi_calculate_cnt++; + + if (rtlpriv->stats.ui_rssi.total_num++ >= + PHY_RSSI_SLID_WIN_MAX) { + rtlpriv->stats.ui_rssi.total_num = + PHY_RSSI_SLID_WIN_MAX; + last_rssi = rtlpriv->stats.ui_rssi.elements[ + rtlpriv->stats.ui_rssi.index]; + rtlpriv->stats.ui_rssi.total_val -= last_rssi; + } + + rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength; + rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi.index++] + = pstats->signalstrength; + + if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX) + rtlpriv->stats.ui_rssi.index = 0; + + tmpval = rtlpriv->stats.ui_rssi.total_val / + rtlpriv->stats.ui_rssi.total_num; + rtlpriv->stats.signal_strength = _rtl92se_translate_todbm(hw, + (u8) tmpval); + pstats->rssi = rtlpriv->stats.signal_strength; + } + + if (!pstats->is_cck && pstats->packet_toself) { + for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath; + rfpath++) { + if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) { + rtlpriv->stats.rx_rssi_percentage[rfpath] = + pstats->rx_mimo_signalstrength[rfpath]; + + } + + if (pstats->rx_mimo_signalstrength[rfpath] > + rtlpriv->stats.rx_rssi_percentage[rfpath]) { + rtlpriv->stats.rx_rssi_percentage[rfpath] = + ((rtlpriv->stats.rx_rssi_percentage[rfpath] + * (RX_SMOOTH_FACTOR - 1)) + + (pstats->rx_mimo_signalstrength[rfpath])) / + (RX_SMOOTH_FACTOR); + + rtlpriv->stats.rx_rssi_percentage[rfpath] = + rtlpriv->stats.rx_rssi_percentage[rfpath] + + 1; + } else { + rtlpriv->stats.rx_rssi_percentage[rfpath] = + ((rtlpriv->stats.rx_rssi_percentage[rfpath] + * (RX_SMOOTH_FACTOR - 1)) + + (pstats->rx_mimo_signalstrength[rfpath])) / + (RX_SMOOTH_FACTOR); + } + + } + } +} + +static void _rtl92se_update_rxsignalstatistics(struct ieee80211_hw *hw, + struct rtl_stats *pstats) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + int weighting = 0; + + if (rtlpriv->stats.recv_signal_power == 0) + rtlpriv->stats.recv_signal_power = pstats->recvsignalpower; + + if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power) + weighting = 5; + else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power) + weighting = (-5); + + rtlpriv->stats.recv_signal_power = (rtlpriv->stats.recv_signal_power * 5 + + pstats->recvsignalpower + + weighting) / 6; +} + +static void _rtl92se_process_pwdb(struct ieee80211_hw *hw, + struct rtl_stats *pstats) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + long undec_sm_pwdb = 0; + + if (mac->opmode == NL80211_IFTYPE_ADHOC) { + return; + } else { + undec_sm_pwdb = + rtlpriv->dm.undecorated_smoothed_pwdb; + } + + if (pstats->packet_toself || pstats->packet_beacon) { + if (undec_sm_pwdb < 0) + undec_sm_pwdb = pstats->rx_pwdb_all; + + if (pstats->rx_pwdb_all > (u32) undec_sm_pwdb) { + undec_sm_pwdb = + (((undec_sm_pwdb) * + (RX_SMOOTH_FACTOR - 1)) + + (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR); + + undec_sm_pwdb = undec_sm_pwdb + 1; + } else { + undec_sm_pwdb = (((undec_sm_pwdb) * + (RX_SMOOTH_FACTOR - 1)) + (pstats->rx_pwdb_all)) / + (RX_SMOOTH_FACTOR); + } + + rtlpriv->dm.undecorated_smoothed_pwdb = undec_sm_pwdb; + _rtl92se_update_rxsignalstatistics(hw, pstats); + } +} + +static void rtl_92s_process_streams(struct ieee80211_hw *hw, + struct rtl_stats *pstats) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 stream; + + for (stream = 0; stream < 2; stream++) { + if (pstats->rx_mimo_signalquality[stream] != -1) { + if (rtlpriv->stats.rx_evm_percentage[stream] == 0) { + rtlpriv->stats.rx_evm_percentage[stream] = + pstats->rx_mimo_signalquality[stream]; + } + + rtlpriv->stats.rx_evm_percentage[stream] = + ((rtlpriv->stats.rx_evm_percentage[stream] * + (RX_SMOOTH_FACTOR - 1)) + + (pstats->rx_mimo_signalquality[stream] * + 1)) / (RX_SMOOTH_FACTOR); + } + } +} + +static void _rtl92se_process_ui_link_quality(struct ieee80211_hw *hw, + struct rtl_stats *pstats) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 last_evm = 0, tmpval; + + if (pstats->signalquality != 0) { + if (pstats->packet_toself || pstats->packet_beacon) { + + if (rtlpriv->stats.ui_link_quality.total_num++ >= + PHY_LINKQUALITY_SLID_WIN_MAX) { + rtlpriv->stats.ui_link_quality.total_num = + PHY_LINKQUALITY_SLID_WIN_MAX; + last_evm = + rtlpriv->stats.ui_link_quality.elements[ + rtlpriv->stats.ui_link_quality.index]; + rtlpriv->stats.ui_link_quality.total_val -= + last_evm; + } + + rtlpriv->stats.ui_link_quality.total_val += + pstats->signalquality; + rtlpriv->stats.ui_link_quality.elements[ + rtlpriv->stats.ui_link_quality.index++] = + pstats->signalquality; + + if (rtlpriv->stats.ui_link_quality.index >= + PHY_LINKQUALITY_SLID_WIN_MAX) + rtlpriv->stats.ui_link_quality.index = 0; + + tmpval = rtlpriv->stats.ui_link_quality.total_val / + rtlpriv->stats.ui_link_quality.total_num; + rtlpriv->stats.signal_quality = tmpval; + + rtlpriv->stats.last_sigstrength_inpercent = tmpval; + + rtl_92s_process_streams(hw, pstats); + + } + } +} + +static void _rtl92se_process_phyinfo(struct ieee80211_hw *hw, + u8 *buffer, + struct rtl_stats *pcurrent_stats) +{ + + if (!pcurrent_stats->packet_matchbssid && + !pcurrent_stats->packet_beacon) + return; + + _rtl92se_process_ui_rssi(hw, pcurrent_stats); + _rtl92se_process_pwdb(hw, pcurrent_stats); + _rtl92se_process_ui_link_quality(hw, pcurrent_stats); +} + +static void _rtl92se_translate_rx_signal_stuff(struct ieee80211_hw *hw, + struct sk_buff *skb, struct rtl_stats *pstats, + u8 *pdesc, struct rx_fwinfo *p_drvinfo) +{ + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + + struct ieee80211_hdr *hdr; + u8 *tmp_buf; + u8 *praddr; + u8 *psaddr; + __le16 fc; + u16 type, cfc; + bool packet_matchbssid, packet_toself, packet_beacon; + + tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; + + hdr = (struct ieee80211_hdr *)tmp_buf; + fc = hdr->frame_control; + cfc = le16_to_cpu(fc); + type = WLAN_FC_GET_TYPE(fc); + praddr = hdr->addr1; + psaddr = hdr->addr2; + + packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) && + (!compare_ether_addr(mac->bssid, (cfc & IEEE80211_FCTL_TODS) ? + hdr->addr1 : (cfc & IEEE80211_FCTL_FROMDS) ? + hdr->addr2 : hdr->addr3)) && (!pstats->hwerror) && + (!pstats->crc) && (!pstats->icv)); + + packet_toself = packet_matchbssid && + (!compare_ether_addr(praddr, rtlefuse->dev_addr)); + + if (ieee80211_is_beacon(fc)) + packet_beacon = true; + + _rtl92se_query_rxphystatus(hw, pstats, pdesc, p_drvinfo, + packet_matchbssid, packet_toself, packet_beacon); + _rtl92se_process_phyinfo(hw, tmp_buf, pstats); +} + +bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, + struct ieee80211_rx_status *rx_status, u8 *pdesc, + struct sk_buff *skb) +{ + struct rx_fwinfo *p_drvinfo; + u32 phystatus = (u32)GET_RX_STATUS_DESC_PHY_STATUS(pdesc); + + stats->length = (u16)GET_RX_STATUS_DESC_PKT_LEN(pdesc); + stats->rx_drvinfo_size = (u8)GET_RX_STATUS_DESC_DRVINFO_SIZE(pdesc) * 8; + stats->rx_bufshift = (u8)(GET_RX_STATUS_DESC_SHIFT(pdesc) & 0x03); + stats->icv = (u16)GET_RX_STATUS_DESC_ICV(pdesc); + stats->crc = (u16)GET_RX_STATUS_DESC_CRC32(pdesc); + stats->hwerror = (u16)(stats->crc | stats->icv); + stats->decrypted = !GET_RX_STATUS_DESC_SWDEC(pdesc); + + stats->rate = (u8)GET_RX_STATUS_DESC_RX_MCS(pdesc); + stats->shortpreamble = (u16)GET_RX_STATUS_DESC_SPLCP(pdesc); + stats->isampdu = (bool)(GET_RX_STATUS_DESC_PAGGR(pdesc) == 1); + stats->timestamp_low = GET_RX_STATUS_DESC_TSFL(pdesc); + stats->rx_is40Mhzpacket = (bool)GET_RX_STATUS_DESC_BW(pdesc); + + if (stats->hwerror) + return false; + + rx_status->freq = hw->conf.channel->center_freq; + rx_status->band = hw->conf.channel->band; + + if (GET_RX_STATUS_DESC_CRC32(pdesc)) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + + if (!GET_RX_STATUS_DESC_SWDEC(pdesc)) + rx_status->flag |= RX_FLAG_DECRYPTED; + + if (GET_RX_STATUS_DESC_BW(pdesc)) + rx_status->flag |= RX_FLAG_40MHZ; + + if (GET_RX_STATUS_DESC_RX_HT(pdesc)) + rx_status->flag |= RX_FLAG_HT; + + rx_status->flag |= RX_FLAG_MACTIME_MPDU; + + if (stats->decrypted) + rx_status->flag |= RX_FLAG_DECRYPTED; + + rx_status->rate_idx = _rtl92se_rate_mapping((bool) + GET_RX_STATUS_DESC_RX_HT(pdesc), + (u8)GET_RX_STATUS_DESC_RX_MCS(pdesc), + (bool)GET_RX_STATUS_DESC_PAGGR(pdesc)); + + + rx_status->mactime = GET_RX_STATUS_DESC_TSFL(pdesc); + if (phystatus == true) { + p_drvinfo = (struct rx_fwinfo *)(skb->data + + stats->rx_bufshift); + _rtl92se_translate_rx_signal_stuff(hw, skb, stats, pdesc, + p_drvinfo); + } + + /*rx_status->qual = stats->signal; */ + rx_status->signal = stats->rssi + 10; + /*rx_status->noise = -stats->noise; */ + + return true; +} + +void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, + struct ieee80211_hdr *hdr, u8 *pdesc_tx, + struct ieee80211_tx_info *info, struct sk_buff *skb, + u8 hw_queue, struct rtl_tcb_desc *ptcb_desc) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct ieee80211_sta *sta = info->control.sta; + u8 *pdesc = (u8 *) pdesc_tx; + u16 seq_number; + __le16 fc = hdr->frame_control; + u8 reserved_macid = 0; + u8 fw_qsel = _rtl92se_map_hwqueue_to_fwqueue(skb, hw_queue); + bool firstseg = (!(hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG))); + bool lastseg = (!(hdr->frame_control & + cpu_to_le16(IEEE80211_FCTL_MOREFRAGS))); + dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + u8 bw_40 = 0; + + if (mac->opmode == NL80211_IFTYPE_STATION) { + bw_40 = mac->bw_40; + } else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) { + if (sta) + bw_40 = sta->ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40; + } + + seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; + + rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc); + + CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE_RTL8192S); + + if (firstseg) { + if (rtlpriv->dm.useramask) { + /* set txdesc macId */ + if (ptcb_desc->mac_id < 32) { + SET_TX_DESC_MACID(pdesc, ptcb_desc->mac_id); + reserved_macid |= ptcb_desc->mac_id; + } + } + SET_TX_DESC_RSVD_MACID(pdesc, reserved_macid); + + SET_TX_DESC_TXHT(pdesc, ((ptcb_desc->hw_rate >= + DESC92S_RATEMCS0) ? 1 : 0)); + + if (rtlhal->version == VERSION_8192S_ACUT) { + if (ptcb_desc->hw_rate == DESC92S_RATE1M || + ptcb_desc->hw_rate == DESC92S_RATE2M || + ptcb_desc->hw_rate == DESC92S_RATE5_5M || + ptcb_desc->hw_rate == DESC92S_RATE11M) { + ptcb_desc->hw_rate = DESC92S_RATE12M; + } + } + + SET_TX_DESC_TX_RATE(pdesc, ptcb_desc->hw_rate); + + if (ptcb_desc->use_shortgi || ptcb_desc->use_shortpreamble) + SET_TX_DESC_TX_SHORT(pdesc, 0); + + /* Aggregation related */ + if (info->flags & IEEE80211_TX_CTL_AMPDU) + SET_TX_DESC_AGG_ENABLE(pdesc, 1); + + /* For AMPDU, we must insert SSN into TX_DESC */ + SET_TX_DESC_SEQ(pdesc, seq_number); + + /* Protection mode related */ + /* For 92S, if RTS/CTS are set, HW will execute RTS. */ + /* We choose only one protection mode to execute */ + SET_TX_DESC_RTS_ENABLE(pdesc, ((ptcb_desc->rts_enable && + !ptcb_desc->cts_enable) ? 1 : 0)); + SET_TX_DESC_CTS_ENABLE(pdesc, ((ptcb_desc->cts_enable) ? + 1 : 0)); + SET_TX_DESC_RTS_STBC(pdesc, ((ptcb_desc->rts_stbc) ? 1 : 0)); + + SET_TX_DESC_RTS_RATE(pdesc, ptcb_desc->rts_rate); + SET_TX_DESC_RTS_BANDWIDTH(pdesc, 0); + SET_TX_DESC_RTS_SUB_CARRIER(pdesc, ptcb_desc->rts_sc); + SET_TX_DESC_RTS_SHORT(pdesc, ((ptcb_desc->rts_rate <= + DESC92S_RATE54M) ? + (ptcb_desc->rts_use_shortpreamble ? 1 : 0) + : (ptcb_desc->rts_use_shortgi ? 1 : 0))); + + + /* Set Bandwidth and sub-channel settings. */ + if (bw_40) { + if (ptcb_desc->packet_bw) { + SET_TX_DESC_TX_BANDWIDTH(pdesc, 1); + /* use duplicated mode */ + SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0); + } else { + SET_TX_DESC_TX_BANDWIDTH(pdesc, 0); + SET_TX_DESC_TX_SUB_CARRIER(pdesc, + mac->cur_40_prime_sc); + } + } else { + SET_TX_DESC_TX_BANDWIDTH(pdesc, 0); + SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0); + } + + /* 3 Fill necessary field in First Descriptor */ + /*DWORD 0*/ + SET_TX_DESC_LINIP(pdesc, 0); + SET_TX_DESC_OFFSET(pdesc, 32); + SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb->len); + + /*DWORD 1*/ + SET_TX_DESC_RA_BRSR_ID(pdesc, ptcb_desc->ratr_index); + + /* Fill security related */ + if (info->control.hw_key) { + struct ieee80211_key_conf *keyconf; + + keyconf = info->control.hw_key; + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + SET_TX_DESC_SEC_TYPE(pdesc, 0x1); + break; + case WLAN_CIPHER_SUITE_TKIP: + SET_TX_DESC_SEC_TYPE(pdesc, 0x2); + break; + case WLAN_CIPHER_SUITE_CCMP: + SET_TX_DESC_SEC_TYPE(pdesc, 0x3); + break; + default: + SET_TX_DESC_SEC_TYPE(pdesc, 0x0); + break; + + } + } + + /* Set Packet ID */ + SET_TX_DESC_PACKET_ID(pdesc, 0); + + /* We will assign magement queue to BK. */ + SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel); + + /* Alwasy enable all rate fallback range */ + SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F); + + /* Fix: I don't kown why hw use 6.5M to tx when set it */ + SET_TX_DESC_USER_RATE(pdesc, + ptcb_desc->use_driver_rate ? 1 : 0); + + /* Set NON_QOS bit. */ + if (!ieee80211_is_data_qos(fc)) + SET_TX_DESC_NON_QOS(pdesc, 1); + + } + + /* Fill fields that are required to be initialized + * in all of the descriptors */ + /*DWORD 0 */ + SET_TX_DESC_FIRST_SEG(pdesc, (firstseg ? 1 : 0)); + SET_TX_DESC_LAST_SEG(pdesc, (lastseg ? 1 : 0)); + + /* DWORD 7 */ + SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) skb->len); + + /* DOWRD 8 */ + SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping)); + + RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, ("\n")); +} + +void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, + bool firstseg, bool lastseg, struct sk_buff *skb) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_tcb_desc *tcb_desc = (struct rtl_tcb_desc *)(skb->cb); + + dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + + /* Clear all status */ + CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_CMDDESC_SIZE_RTL8192S); + + /* This bit indicate this packet is used for FW download. */ + if (tcb_desc->cmd_or_init == DESC_PACKET_TYPE_INIT) { + /* For firmware downlaod we only need to set LINIP */ + SET_TX_DESC_LINIP(pdesc, tcb_desc->last_inipkt); + + /* 92SE must set as 1 for firmware download HW DMA error */ + SET_TX_DESC_FIRST_SEG(pdesc, 1); + SET_TX_DESC_LAST_SEG(pdesc, 1); + + /* 92SE need not to set TX packet size when firmware download */ + SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len)); + SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len)); + SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping)); + + SET_TX_DESC_OWN(pdesc, 1); + } else { /* H2C Command Desc format (Host TXCMD) */ + /* 92SE must set as 1 for firmware download HW DMA error */ + SET_TX_DESC_FIRST_SEG(pdesc, 1); + SET_TX_DESC_LAST_SEG(pdesc, 1); + + SET_TX_DESC_OFFSET(pdesc, 0x20); + + /* Buffer size + command header */ + SET_TX_DESC_PKT_SIZE(pdesc, (u16)(skb->len)); + /* Fixed queue of H2C command */ + SET_TX_DESC_QUEUE_SEL(pdesc, 0x13); + + SET_BITS_TO_LE_4BYTE(skb->data, 24, 7, rtlhal->h2c_txcmd_seq); + + SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16)(skb->len)); + SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping)); + + SET_TX_DESC_OWN(pdesc, 1); + + } +} + +void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val) +{ + if (istx == true) { + switch (desc_name) { + case HW_DESC_OWN: + SET_TX_DESC_OWN(pdesc, 1); + break; + case HW_DESC_TX_NEXTDESC_ADDR: + SET_TX_DESC_NEXT_DESC_ADDRESS(pdesc, *(u32 *) val); + break; + default: + RT_ASSERT(false, ("ERR txdesc :%d not process\n", + desc_name)); + break; + } + } else { + switch (desc_name) { + case HW_DESC_RXOWN: + SET_RX_STATUS_DESC_OWN(pdesc, 1); + break; + case HW_DESC_RXBUFF_ADDR: + SET_RX_STATUS__DESC_BUFF_ADDR(pdesc, *(u32 *) val); + break; + case HW_DESC_RXPKT_LEN: + SET_RX_STATUS_DESC_PKT_LEN(pdesc, *(u32 *) val); + break; + case HW_DESC_RXERO: + SET_RX_STATUS_DESC_EOR(pdesc, 1); + break; + default: + RT_ASSERT(false, ("ERR rxdesc :%d not process\n", + desc_name)); + break; + } + } +} + +u32 rtl92se_get_desc(u8 *desc, bool istx, u8 desc_name) +{ + u32 ret = 0; + + if (istx == true) { + switch (desc_name) { + case HW_DESC_OWN: + ret = GET_TX_DESC_OWN(desc); + break; + case HW_DESC_TXBUFF_ADDR: + ret = GET_TX_DESC_TX_BUFFER_ADDRESS(desc); + break; + default: + RT_ASSERT(false, ("ERR txdesc :%d not process\n", + desc_name)); + break; + } + } else { + switch (desc_name) { + case HW_DESC_OWN: + ret = GET_RX_STATUS_DESC_OWN(desc); + break; + case HW_DESC_RXPKT_LEN: + ret = GET_RX_STATUS_DESC_PKT_LEN(desc); + break; + default: + RT_ASSERT(false, ("ERR rxdesc :%d not process\n", + desc_name)); + break; + } + } + return ret; +} + +void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + rtl_write_word(rtlpriv, TP_POLL, BIT(0) << (hw_queue)); +} diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h new file mode 100644 index 00000000000..05862c51b86 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h @@ -0,0 +1,45 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ +#ifndef __REALTEK_PCI92SE_TRX_H__ +#define __REALTEK_PCI92SE_TRX_H__ + +void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, + u8 *pdesc, struct ieee80211_tx_info *info, + struct sk_buff *skb, u8 hw_queue, + struct rtl_tcb_desc *ptcb_desc); +void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, bool firstseg, + bool lastseg, struct sk_buff *skb); +bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, + struct ieee80211_rx_status *rx_status, u8 *pdesc, + struct sk_buff *skb); +void rtl92se_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val); +u32 rtl92se_get_desc(u8 *pdesc, bool istx, u8 desc_name); +void rtl92se_tx_polling(struct ieee80211_hw *hw, u8 hw_queue); + +#endif |