diff options
Diffstat (limited to 'drivers/net/wireless/strip.c')
| -rw-r--r-- | drivers/net/wireless/strip.c | 66 |
1 files changed, 24 insertions, 42 deletions
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index bced3fe1cf8..5dd23c93497 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -768,41 +768,17 @@ static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst, /* General routines for STRIP */ /* - * get_baud returns the current baud rate, as one of the constants defined in - * termbits.h - * If the user has issued a baud rate override using the 'setserial' command - * and the logical current rate is set to 38.4, then the true baud rate - * currently in effect (57.6 or 115.2) is returned. - */ -static unsigned int get_baud(struct tty_struct *tty) -{ - if (!tty || !tty->termios) - return (0); - if ((tty->termios->c_cflag & CBAUD) == B38400 && tty->driver_data) { - struct async_struct *info = - (struct async_struct *) tty->driver_data; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - return (B57600); - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - return (B115200); - } - return (tty->termios->c_cflag & CBAUD); -} - -/* * set_baud sets the baud rate to the rate defined by baudcode - * Note: The rate B38400 should be avoided, because the user may have - * issued a 'setserial' speed override to map that to a different speed. - * We could achieve a true rate of 38400 if we needed to by cancelling - * any user speed override that is in place, but that might annoy the - * user, so it is simplest to just avoid using 38400. */ -static void set_baud(struct tty_struct *tty, unsigned int baudcode) +static void set_baud(struct tty_struct *tty, speed_t baudrate) { - struct ktermios old_termios = *(tty->termios); - tty->termios->c_cflag &= ~CBAUD; /* Clear the old baud setting */ - tty->termios->c_cflag |= baudcode; /* Set the new baud setting */ - tty->driver->set_termios(tty, &old_termios); + struct ktermios old_termios; + + mutex_lock(&tty->termios_mutex); + old_termios =*(tty->termios); + tty_encode_baud_rate(tty, baudrate, baudrate); + tty->ops->set_termios(tty, &old_termios); + mutex_unlock(&tty->termios_mutex); } /* @@ -1217,7 +1193,7 @@ static void ResetRadio(struct strip *strip_info) strip_info->watchdog_doreset = jiffies + 1 * HZ; /* If the user has selected a baud rate above 38.4 see what magic we have to do */ - if (strip_info->user_baud > B38400) { + if (strip_info->user_baud > 38400) { /* * Subtle stuff: Pay attention :-) * If the serial port is currently at the user's selected (>38.4) rate, @@ -1227,17 +1203,17 @@ static void ResetRadio(struct strip *strip_info) * issued the ATS304 command last time through, so this time we restore * the user's selected rate and issue the normal starmode reset string. */ - if (strip_info->user_baud == get_baud(tty)) { + if (strip_info->user_baud == tty_get_baud_rate(tty)) { static const char b0[] = "ate0q1s304=57600\r"; static const char b1[] = "ate0q1s304=115200\r"; static const StringDescriptor baudstring[2] = { {b0, sizeof(b0) - 1} , {b1, sizeof(b1) - 1} }; - set_baud(tty, B19200); - if (strip_info->user_baud == B57600) + set_baud(tty, 19200); + if (strip_info->user_baud == 57600) s = baudstring[0]; - else if (strip_info->user_baud == B115200) + else if (strip_info->user_baud == 115200) s = baudstring[1]; else s = baudstring[1]; /* For now */ @@ -1245,7 +1221,7 @@ static void ResetRadio(struct strip *strip_info) set_baud(tty, strip_info->user_baud); } - tty->driver->write(tty, s.string, s.length); + tty->ops->write(tty, s.string, s.length); #ifdef EXT_COUNTERS strip_info->tx_ebytes += s.length; #endif @@ -1267,7 +1243,7 @@ static void strip_write_some_more(struct tty_struct *tty) if (strip_info->tx_left > 0) { int num_written = - tty->driver->write(tty, strip_info->tx_head, + tty->ops->write(tty, strip_info->tx_head, strip_info->tx_left); strip_info->tx_left -= num_written; strip_info->tx_head += num_written; @@ -2457,7 +2433,7 @@ static int strip_open_low(struct net_device *dev) strip_info->working = FALSE; strip_info->firmware_level = NoStructure; strip_info->next_command = CompatibilityCommand; - strip_info->user_baud = get_baud(strip_info->tty); + strip_info->user_baud = tty_get_baud_rate(strip_info->tty); printk(KERN_INFO "%s: Initializing Radio.\n", strip_info->dev->name); @@ -2632,6 +2608,13 @@ static int strip_open(struct tty_struct *tty) return -EEXIST; /* + * We need a write method. + */ + + if (tty->ops->write == NULL) + return -EOPNOTSUPP; + + /* * OK. Find a free STRIP channel to use. */ if ((strip_info = strip_alloc()) == NULL) @@ -2652,8 +2635,7 @@ static int strip_open(struct tty_struct *tty) tty->disc_data = strip_info; tty->receive_room = 65536; - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); + tty_driver_flush_buffer(tty); /* * Restore default settings |