1 files changed, 496 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
new file mode 100644
index 00000000000..d14d69d733a
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -0,0 +1,496 @@
+#include "cmd.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/crc7.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "io.h"
+#include "ps.h"
+#include "acx.h"
+
+/**
+ * send command to firmware
+ *
+ * @wl: wl struct
+ * @id: command id
+ * @buf: buffer containing the command, must work with dma
+ * @len: length of the buffer
+ */
+int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+	struct wl1251_cmd_header *cmd;
+	unsigned long timeout;
+	u32 intr;
+	int ret = 0;
+
+	cmd = buf;
+	cmd->id = id;
+	cmd->status = 0;
+
+	WARN_ON(len % 4 != 0);
+
+	wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
+
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
+
+	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
+		if (time_after(jiffies, timeout)) {
+			wl1251_error("command complete timeout");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		msleep(1);
+
+		intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	}
+
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			   WL1251_ACX_INTR_CMD_COMPLETE);
+
+out:
+	return ret;
+}
+
+/**
+ * send test command to firmware
+ *
+ * @wl: wl struct
+ * @buf: buffer containing the command, with all headers, must work with dma
+ * @len: length of the buffer
+ * @answer: is answer needed
+ */
+int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
+{
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd test");
+
+	ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
+
+	if (ret < 0) {
+		wl1251_warning("TEST command failed");
+		return ret;
+	}
+
+	if (answer) {
+		struct wl1251_command *cmd_answer;
+
+		/*
+		 * The test command got in, we can read the answer.
+		 * The answer would be a wl1251_command, where the
+		 * parameter array contains the actual answer.
+		 */
+		wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+		cmd_answer = buf;
+
+		if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
+			wl1251_error("TEST command answer error: %d",
+				     cmd_answer->header.status);
+	}
+
+	return 0;
+}
+
+/**
+ * read acx from firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer for the response, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+	struct acx_header *acx = buf;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd interrogate");
+
+	acx->id = id;
+
+	/* payload length, does not include any headers */
+	acx->len = len - sizeof(*acx);
+
+	ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_error("INTERROGATE command failed");
+		goto out;
+	}
+
+	/* the interrogate command got in, we can read the answer */
+	wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
+
+	acx = buf;
+	if (acx->cmd.status != CMD_STATUS_SUCCESS)
+		wl1251_error("INTERROGATE command error: %d",
+			     acx->cmd.status);
+
+out:
+	return ret;
+}
+
+/**
+ * write acx value to firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer containing acx, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+	struct acx_header *acx = buf;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd configure");
+
+	acx->id = id;
+
+	/* payload length, does not include any headers */
+	acx->len = len - sizeof(*acx);
+
+	ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
+	if (ret < 0) {
+		wl1251_warning("CONFIGURE command NOK");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+	struct wl1251_cmd_vbm_update *vbm;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd vbm");
+
+	vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
+	if (!vbm) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Count and period will be filled by the target */
+	vbm->tim.bitmap_ctrl = bitmap_control;
+	if (bitmap_len > PARTIAL_VBM_MAX) {
+		wl1251_warning("cmd vbm len is %d B, truncating to %d",
+			       bitmap_len, PARTIAL_VBM_MAX);
+		bitmap_len = PARTIAL_VBM_MAX;
+	}
+	memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
+	vbm->tim.identity = identity;
+	vbm->tim.length = bitmap_len + 3;
+
+	vbm->len = cpu_to_le16(bitmap_len + 5);
+
+	ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
+	if (ret < 0) {
+		wl1251_error("VBM command failed");
+		goto out;
+	}
+
+out:
+	kfree(vbm);
+	return ret;
+}
+
+int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
+{
+	struct cmd_enabledisable_path *cmd;
+	int ret;
+	u16 cmd_rx, cmd_tx;
+
+	wl1251_debug(DEBUG_CMD, "cmd data path");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->channel = channel;
+
+	if (enable) {
+		cmd_rx = CMD_ENABLE_RX;
+		cmd_tx = CMD_ENABLE_TX;
+	} else {
+		cmd_rx = CMD_DISABLE_RX;
+		cmd_tx = CMD_DISABLE_TX;
+	}
+
+	ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("rx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("tx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+		    u16 beacon_interval, u8 dtim_interval)
+{
+	struct cmd_join *join;
+	int ret, i;
+	u8 *bssid;
+
+	join = kzalloc(sizeof(*join), GFP_KERNEL);
+	if (!join) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
+		     bss_type == BSS_TYPE_IBSS ? " ibss" : "",
+		     channel, beacon_interval, dtim_interval);
+
+	/* Reverse order BSSID */
+	bssid = (u8 *) &join->bssid_lsb;
+	for (i = 0; i < ETH_ALEN; i++)
+		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+	join->rx_config_options = wl->rx_config;
+	join->rx_filter_options = wl->rx_filter;
+
+	/*
+	 * FIXME: disable temporarily all filters because after commit
+	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
+	 * association. The filter logic needs to be implemented properly
+	 * and once that is done, this hack can be removed.
+	 */
+	join->rx_config_options = 0;
+	join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
+
+	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+	join->beacon_interval = beacon_interval;
+	join->dtim_interval = dtim_interval;
+	join->bss_type = bss_type;
+	join->channel = channel;
+	join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+	ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+	if (ret < 0) {
+		wl1251_error("failed to initiate cmd join");
+		goto out;
+	}
+
+out:
+	kfree(join);
+	return ret;
+}
+
+int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
+{
+	struct wl1251_cmd_ps_params *ps_params = NULL;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd set ps mode");
+
+	ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
+	if (!ps_params) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ps_params->ps_mode = ps_mode;
+	ps_params->send_null_data = 1;
+	ps_params->retries = 5;
+	ps_params->hang_over_period = 128;
+	ps_params->null_data_rate = 1; /* 1 Mbps */
+
+	ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
+			      sizeof(*ps_params));
+	if (ret < 0) {
+		wl1251_error("cmd set_ps_mode failed");
+		goto out;
+	}
+
+out:
+	kfree(ps_params);
+	return ret;
+}
+
+int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
+			   size_t len)
+{
+	struct cmd_read_write_memory *cmd;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd read memory");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	WARN_ON(len > MAX_READ_SIZE);
+	len = min_t(size_t, len, MAX_READ_SIZE);
+
+	cmd->addr = addr;
+	cmd->size = len;
+
+	ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("read memory command failed: %d", ret);
+		goto out;
+	}
+
+	/* the read command got in, we can now read the answer */
+	wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+	if (cmd->header.status != CMD_STATUS_SUCCESS)
+		wl1251_error("error in read command result: %d",
+			     cmd->header.status);
+
+	memcpy(answer, cmd->value, len);
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
+			    void *buf, size_t buf_len)
+{
+	struct wl1251_cmd_packet_template *cmd;
+	size_t cmd_len;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+	WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
+	buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
+	cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
+
+	cmd = kzalloc(cmd_len, GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->size = cpu_to_le16(buf_len);
+
+	if (buf)
+		memcpy(cmd->data, buf, buf_len);
+
+	ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
+	if (ret < 0) {
+		wl1251_warning("cmd set_template failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    struct ieee80211_channel *channels[],
+		    unsigned int n_channels, unsigned int n_probes)
+{
+	struct wl1251_cmd_scan *cmd;
+	int i, ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd scan");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+	cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
+						    CFG_RX_MGMT_EN |
+						    CFG_RX_BCN_EN);
+	cmd->params.scan_options = 0;
+	cmd->params.num_channels = n_channels;
+	cmd->params.num_probe_requests = n_probes;
+	cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+	cmd->params.tid_trigger = 0;
+
+	for (i = 0; i < n_channels; i++) {
+		cmd->channels[i].min_duration =
+			cpu_to_le32(WL1251_SCAN_MIN_DURATION);
+		cmd->channels[i].max_duration =
+			cpu_to_le32(WL1251_SCAN_MAX_DURATION);
+		memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
+		memset(&cmd->channels[i].bssid_msb, 0xff, 2);
+		cmd->channels[i].early_termination = 0;
+		cmd->channels[i].tx_power_att = 0;
+		cmd->channels[i].channel = channels[i]->hw_value;
+	}
+
+	cmd->params.ssid_len = ssid_len;
+	if (ssid)
+		memcpy(cmd->params.ssid, ssid, ssid_len);
+
+	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("cmd scan failed: %d", ret);
+		goto out;
+	}
+
+	wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+	if (cmd->header.status != CMD_STATUS_SUCCESS) {
+		wl1251_error("cmd scan status wasn't success: %d",
+			     cmd->header.status);
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
+{
+	struct wl1251_cmd_trigger_scan_to *cmd;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->timeout = timeout;
+
+	ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("cmd trigger scan to failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}