diff options
Diffstat (limited to 'drivers/net/wireless/ti/wl18xx/main.c')
| -rw-r--r-- | drivers/net/wireless/ti/wl18xx/main.c | 1610 |
1 files changed, 1610 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c new file mode 100644 index 00000000000..69042bb9a09 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -0,0 +1,1610 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/ip.h> +#include <linux/firmware.h> + +#include "../wlcore/wlcore.h" +#include "../wlcore/debug.h" +#include "../wlcore/io.h" +#include "../wlcore/acx.h" +#include "../wlcore/tx.h" +#include "../wlcore/rx.h" +#include "../wlcore/io.h" +#include "../wlcore/boot.h" + +#include "reg.h" +#include "conf.h" +#include "acx.h" +#include "tx.h" +#include "wl18xx.h" +#include "io.h" +#include "debugfs.h" + +#define WL18XX_RX_CHECKSUM_MASK 0x40 + +static char *ht_mode_param = NULL; +static char *board_type_param = NULL; +static bool checksum_param = false; +static bool enable_11a_param = true; +static int num_rx_desc_param = -1; + +/* phy paramters */ +static int dc2dc_param = -1; +static int n_antennas_2_param = -1; +static int n_antennas_5_param = -1; +static int low_band_component_param = -1; +static int low_band_component_type_param = -1; +static int high_band_component_param = -1; +static int high_band_component_type_param = -1; +static int pwr_limit_reference_11_abg_param = -1; + +static const u8 wl18xx_rate_to_idx_2ghz[] = { + /* MCS rates are used only with 11n */ + 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ + 14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */ + 13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */ + 12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */ + 11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */ + 10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */ + 9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */ + 8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */ + 7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */ + 3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */ + 0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */ + + 11, /* WL18XX_CONF_HW_RXTX_RATE_54 */ + 10, /* WL18XX_CONF_HW_RXTX_RATE_48 */ + 9, /* WL18XX_CONF_HW_RXTX_RATE_36 */ + 8, /* WL18XX_CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */ + + 7, /* WL18XX_CONF_HW_RXTX_RATE_18 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_12 */ + 3, /* WL18XX_CONF_HW_RXTX_RATE_11 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_9 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_6 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_2 */ + 0 /* WL18XX_CONF_HW_RXTX_RATE_1 */ +}; + +static const u8 wl18xx_rate_to_idx_5ghz[] = { + /* MCS rates are used only with 11n */ + 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ + 14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */ + 13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */ + 12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */ + 11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */ + 10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */ + 9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */ + 8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */ + 7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */ + 3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */ + 0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */ + + 7, /* WL18XX_CONF_HW_RXTX_RATE_54 */ + 6, /* WL18XX_CONF_HW_RXTX_RATE_48 */ + 5, /* WL18XX_CONF_HW_RXTX_RATE_36 */ + 4, /* WL18XX_CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */ + + 3, /* WL18XX_CONF_HW_RXTX_RATE_18 */ + 2, /* WL18XX_CONF_HW_RXTX_RATE_12 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_11 */ + 1, /* WL18XX_CONF_HW_RXTX_RATE_9 */ + 0, /* WL18XX_CONF_HW_RXTX_RATE_6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_1 */ +}; + +static const u8 *wl18xx_band_rate_to_idx[] = { + [IEEE80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz, + [IEEE80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz +}; + +enum wl18xx_hw_rates { + WL18XX_CONF_HW_RXTX_RATE_MCS15 = 0, + WL18XX_CONF_HW_RXTX_RATE_MCS14, + WL18XX_CONF_HW_RXTX_RATE_MCS13, + WL18XX_CONF_HW_RXTX_RATE_MCS12, + WL18XX_CONF_HW_RXTX_RATE_MCS11, + WL18XX_CONF_HW_RXTX_RATE_MCS10, + WL18XX_CONF_HW_RXTX_RATE_MCS9, + WL18XX_CONF_HW_RXTX_RATE_MCS8, + WL18XX_CONF_HW_RXTX_RATE_MCS7, + WL18XX_CONF_HW_RXTX_RATE_MCS6, + WL18XX_CONF_HW_RXTX_RATE_MCS5, + WL18XX_CONF_HW_RXTX_RATE_MCS4, + WL18XX_CONF_HW_RXTX_RATE_MCS3, + WL18XX_CONF_HW_RXTX_RATE_MCS2, + WL18XX_CONF_HW_RXTX_RATE_MCS1, + WL18XX_CONF_HW_RXTX_RATE_MCS0, + WL18XX_CONF_HW_RXTX_RATE_54, + WL18XX_CONF_HW_RXTX_RATE_48, + WL18XX_CONF_HW_RXTX_RATE_36, + WL18XX_CONF_HW_RXTX_RATE_24, + WL18XX_CONF_HW_RXTX_RATE_22, + WL18XX_CONF_HW_RXTX_RATE_18, + WL18XX_CONF_HW_RXTX_RATE_12, + WL18XX_CONF_HW_RXTX_RATE_11, + WL18XX_CONF_HW_RXTX_RATE_9, + WL18XX_CONF_HW_RXTX_RATE_6, + WL18XX_CONF_HW_RXTX_RATE_5_5, + WL18XX_CONF_HW_RXTX_RATE_2, + WL18XX_CONF_HW_RXTX_RATE_1, + WL18XX_CONF_HW_RXTX_RATE_MAX, +}; + +static struct wlcore_conf wl18xx_conf = { + .sg = { + .params = { + [CONF_SG_ACL_BT_MASTER_MIN_BR] = 10, + [CONF_SG_ACL_BT_MASTER_MAX_BR] = 180, + [CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10, + [CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180, + [CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10, + [CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80, + [CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10, + [CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80, + [CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8, + [CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8, + [CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20, + [CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50, + [CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10, + [CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20, + [CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75, + [CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15, + [CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27, + [CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17, + /* active scan params */ + [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, + /* passive scan params */ + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, + /* passive scan in dual antenna params */ + [CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0, + [CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0, + [CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0, + /* general params */ + [CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1, + [CONF_SG_ANTENNA_CONFIGURATION] = 0, + [CONF_SG_BEACON_MISS_PERCENT] = 60, + [CONF_SG_DHCP_TIME] = 5000, + [CONF_SG_RXT] = 1200, + [CONF_SG_TXT] = 1000, + [CONF_SG_ADAPTIVE_RXT_TXT] = 1, + [CONF_SG_GENERAL_USAGE_BIT_MAP] = 3, + [CONF_SG_HV3_MAX_SERVED] = 6, + [CONF_SG_PS_POLL_TIMEOUT] = 10, + [CONF_SG_UPSD_TIMEOUT] = 10, + [CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2, + [CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5, + [CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30, + /* AP params */ + [CONF_AP_BEACON_MISS_TX] = 3, + [CONF_AP_RX_WINDOW_AFTER_BEACON] = 10, + [CONF_AP_BEACON_WINDOW_INTERVAL] = 2, + [CONF_AP_CONNECTION_PROTECTION_TIME] = 0, + [CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25, + [CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25, + /* CTS Diluting params */ + [CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0, + [CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0, + }, + .state = CONF_SG_PROTECTIVE, + }, + .rx = { + .rx_msdu_life_time = 512000, + .packet_detection_threshold = 0, + .ps_poll_timeout = 15, + .upsd_timeout = 15, + .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD, + .rx_cca_threshold = 0, + .irq_blk_threshold = 0xFFFF, + .irq_pkt_threshold = 0, + .irq_timeout = 600, + .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, + }, + .tx = { + .tx_energy_detection = 0, + .sta_rc_conf = { + .enabled_rates = 0, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + .ac_conf_count = 4, + .ac_conf = { + [CONF_TX_AC_BE] = { + .ac = CONF_TX_AC_BE, + .cw_min = 15, + .cw_max = 63, + .aifsn = 3, + .tx_op_limit = 0, + }, + [CONF_TX_AC_BK] = { + .ac = CONF_TX_AC_BK, + .cw_min = 15, + .cw_max = 63, + .aifsn = 7, + .tx_op_limit = 0, + }, + [CONF_TX_AC_VI] = { + .ac = CONF_TX_AC_VI, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 3008, + }, + [CONF_TX_AC_VO] = { + .ac = CONF_TX_AC_VO, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 1504, + }, + }, + .max_tx_retries = 100, + .ap_aging_period = 300, + .tid_conf_count = 4, + .tid_conf = { + [CONF_TX_AC_BE] = { + .queue_id = CONF_TX_AC_BE, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BE, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_BK] = { + .queue_id = CONF_TX_AC_BK, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BK, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VI] = { + .queue_id = CONF_TX_AC_VI, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VI, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VO] = { + .queue_id = CONF_TX_AC_VO, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VO, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + }, + .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, + .tx_compl_timeout = 350, + .tx_compl_threshold = 10, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, + .tmpl_short_retry_limit = 10, + .tmpl_long_retry_limit = 10, + .tx_watchdog_timeout = 5000, + }, + .conn = { + .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, + .listen_interval = 1, + .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM, + .suspend_listen_interval = 3, + .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, + .bcn_filt_ie_count = 3, + .bcn_filt_ie = { + [0] = { + .ie = WLAN_EID_CHANNEL_SWITCH, + .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, + }, + [1] = { + .ie = WLAN_EID_HT_OPERATION, + .rule = CONF_BCN_RULE_PASS_ON_CHANGE, + }, + [2] = { + .ie = WLAN_EID_ERP_INFO, + .rule = CONF_BCN_RULE_PASS_ON_CHANGE, + }, + }, + .synch_fail_thold = 12, + .bss_lose_timeout = 400, + .beacon_rx_timeout = 10000, + .broadcast_timeout = 20000, + .rx_broadcast_in_ps = 1, + .ps_poll_threshold = 10, + .bet_enable = CONF_BET_MODE_ENABLE, + .bet_max_consecutive = 50, + .psm_entry_retries = 8, + .psm_exit_retries = 16, + .psm_entry_nullfunc_retries = 3, + .dynamic_ps_timeout = 1500, + .forced_ps = false, + .keep_alive_interval = 55000, + .max_listen_interval = 20, + .sta_sleep_auth = WL1271_PSM_ILLEGAL, + }, + .itrim = { + .enable = false, + .timeout = 50000, + }, + .pm_config = { + .host_clk_settling_time = 5000, + .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE, + }, + .roam_trigger = { + .trigger_pacing = 1, + .avg_weight_rssi_beacon = 20, + .avg_weight_rssi_data = 10, + .avg_weight_snr_beacon = 20, + .avg_weight_snr_data = 10, + }, + .scan = { + .min_dwell_time_active = 7500, + .max_dwell_time_active = 30000, + .min_dwell_time_passive = 100000, + .max_dwell_time_passive = 100000, + .num_probe_reqs = 2, + .split_scan_timeout = 50000, + }, + .sched_scan = { + /* + * Values are in TU/1000 but since sched scan FW command + * params are in TUs rounding up may occur. + */ + .base_dwell_time = 7500, + .max_dwell_time_delta = 22500, + /* based on 250bits per probe @1Mbps */ + .dwell_time_delta_per_probe = 2000, + /* based on 250bits per probe @6Mbps (plus a bit more) */ + .dwell_time_delta_per_probe_5 = 350, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, + .num_probe_reqs = 2, + .rssi_threshold = -90, + .snr_threshold = 0, + }, + .ht = { + .rx_ba_win_size = 10, + .tx_ba_win_size = 64, + .inactivity_timeout = 10000, + .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP, + }, + .mem = { + .num_stations = 1, + .ssid_profiles = 1, + .rx_block_num = 40, + .tx_min_block_num = 40, + .dynamic_memory = 1, + .min_req_tx_blocks = 45, + .min_req_rx_blocks = 22, + .tx_min = 27, + }, + .fm_coex = { + .enable = true, + .swallow_period = 5, + .n_divider_fref_set_1 = 0xff, /* default */ + .n_divider_fref_set_2 = 12, + .m_divider_fref_set_1 = 0xffff, + .m_divider_fref_set_2 = 148, /* default */ + .coex_pll_stabilization_time = 0xffffffff, /* default */ + .ldo_stabilization_time = 0xffff, /* default */ + .fm_disturbed_band_margin = 0xff, /* default */ + .swallow_clk_diff = 0xff, /* default */ + }, + .rx_streaming = { + .duration = 150, + .queues = 0x1, + .interval = 20, + .always = 0, + }, + .fwlog = { + .mode = WL12XX_FWLOG_ON_DEMAND, + .mem_blocks = 2, + .severity = 0, + .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED, + .output = WL12XX_FWLOG_OUTPUT_HOST, + .threshold = 0, + }, + .rate = { + .rate_retry_score = 32000, + .per_add = 8192, + .per_th1 = 2048, + .per_th2 = 4096, + .max_per = 8100, + .inverse_curiosity_factor = 5, + .tx_fail_low_th = 4, + .tx_fail_high_th = 10, + .per_alpha_shift = 4, + .per_add_shift = 13, + .per_beta1_shift = 10, + .per_beta2_shift = 8, + .rate_check_up = 2, + .rate_check_down = 12, + .rate_retry_policy = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + }, + }, + .hangover = { + .recover_time = 0, + .hangover_period = 20, + .dynamic_mode = 1, + .early_termination_mode = 1, + .max_period = 20, + .min_period = 1, + .increase_delta = 1, + .decrease_delta = 2, + .quiet_time = 4, + .increase_time = 1, + .window_size = 16, + }, +}; + +static struct wl18xx_priv_conf wl18xx_default_priv_conf = { + .ht = { + .mode = HT_MODE_DEFAULT, + }, + .phy = { + .phy_standalone = 0x00, + .primary_clock_setting_time = 0x05, + .clock_valid_on_wake_up = 0x00, + .secondary_clock_setting_time = 0x05, + .board_type = BOARD_TYPE_HDK_18XX, + .rdl = 0x01, + .auto_detect = 0x00, + .dedicated_fem = FEM_NONE, + .low_band_component = COMPONENT_2_WAY_SWITCH, + .low_band_component_type = 0x06, + .high_band_component = COMPONENT_2_WAY_SWITCH, + .high_band_component_type = 0x09, + .tcxo_ldo_voltage = 0x00, + .xtal_itrim_val = 0x04, + .srf_state = 0x00, + .io_configuration = 0x01, + .sdio_configuration = 0x00, + .settings = 0x00, + .enable_clpc = 0x00, + .enable_tx_low_pwr_on_siso_rdl = 0x00, + .rx_profile = 0x00, + .pwr_limit_reference_11_abg = 0xc8, + .psat = 0, + .low_power_val = 0x00, + .med_power_val = 0x0a, + .high_power_val = 0x1e, + .external_pa_dc2dc = 0, + .number_of_assembled_ant2_4 = 1, + .number_of_assembled_ant5 = 1, + }, +}; + +static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { + [PART_TOP_PRCM_ELP_SOC] = { + .mem = { .start = 0x00A02000, .size = 0x00010000 }, + .reg = { .start = 0x00807000, .size = 0x00005000 }, + .mem2 = { .start = 0x00800000, .size = 0x0000B000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_DOWN] = { + .mem = { .start = 0x00000000, .size = 0x00014000 }, + .reg = { .start = 0x00810000, .size = 0x0000BFFF }, + .mem2 = { .start = 0x00000000, .size = 0x00000000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_BOOT] = { + .mem = { .start = 0x00700000, .size = 0x0000030c }, + .reg = { .start = 0x00802000, .size = 0x00014578 }, + .mem2 = { .start = 0x00B00404, .size = 0x00001000 }, + .mem3 = { .start = 0x00C00000, .size = 0x00000400 }, + }, + [PART_WORK] = { + .mem = { .start = 0x00800000, .size = 0x000050FC }, + .reg = { .start = 0x00B00404, .size = 0x00001000 }, + .mem2 = { .start = 0x00C00000, .size = 0x00000400 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_PHY_INIT] = { + .mem = { .start = 0x80926000, + .size = sizeof(struct wl18xx_mac_and_phy_params) }, + .reg = { .start = 0x00000000, .size = 0x00000000 }, + .mem2 = { .start = 0x00000000, .size = 0x00000000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, +}; + +static const int wl18xx_rtable[REG_TABLE_LEN] = { + [REG_ECPU_CONTROL] = WL18XX_REG_ECPU_CONTROL, + [REG_INTERRUPT_NO_CLEAR] = WL18XX_REG_INTERRUPT_NO_CLEAR, + [REG_INTERRUPT_ACK] = WL18XX_REG_INTERRUPT_ACK, + [REG_COMMAND_MAILBOX_PTR] = WL18XX_REG_COMMAND_MAILBOX_PTR, + [REG_EVENT_MAILBOX_PTR] = WL18XX_REG_EVENT_MAILBOX_PTR, + [REG_INTERRUPT_TRIG] = WL18XX_REG_INTERRUPT_TRIG_H, + [REG_INTERRUPT_MASK] = WL18XX_REG_INTERRUPT_MASK, + [REG_PC_ON_RECOVERY] = WL18XX_SCR_PAD4, + [REG_CHIP_ID_B] = WL18XX_REG_CHIP_ID_B, + [REG_CMD_MBOX_ADDRESS] = WL18XX_CMD_MBOX_ADDRESS, + + /* data access memory addresses, used with partition translation */ + [REG_SLV_MEM_DATA] = WL18XX_SLV_MEM_DATA, + [REG_SLV_REG_DATA] = WL18XX_SLV_REG_DATA, + + /* raw data access memory addresses */ + [REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR, +}; + +static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = { + [CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true }, + [CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true }, + [CLOCK_CONFIG_16_8_M] = { 7, 100, 0, 0, false }, + [CLOCK_CONFIG_19_2_M] = { 8, 100, 0, 0, false }, + [CLOCK_CONFIG_26_M] = { 13, 120, 0, 0, false }, + [CLOCK_CONFIG_32_736_M] = { 9, 132, 3751, 4, true }, + [CLOCK_CONFIG_33_6_M] = { 7, 100, 0, 0, false }, + [CLOCK_CONFIG_38_468_M] = { 8, 100, 0, 0, false }, + [CLOCK_CONFIG_52_M] = { 13, 120, 0, 0, false }, +}; + +/* TODO: maybe move to a new header file? */ +#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw.bin" + +static int wl18xx_identify_chip(struct wl1271 *wl) +{ + int ret = 0; + + switch (wl->chip.id) { + case CHIP_ID_185x_PG20: + wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG20)", + wl->chip.id); + wl->sr_fw_name = WL18XX_FW_NAME; + /* wl18xx uses the same firmware for PLT */ + wl->plt_fw_name = WL18XX_FW_NAME; + wl->quirks |= WLCORE_QUIRK_NO_ELP | + WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | + WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | + WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | + WLCORE_QUIRK_TX_PAD_LAST_FRAME; + + wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, + WL18XX_MAJOR_VER, WL18XX_SUBTYPE_VER, + WL18XX_MINOR_VER); + break; + case CHIP_ID_185x_PG10: + wl1271_warning("chip id 0x%x (185x PG10) is deprecated", + wl->chip.id); + ret = -ENODEV; + goto out; + + default: + wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); + ret = -ENODEV; + goto out; + } + +out: + return ret; +} + +static int wl18xx_set_clk(struct wl1271 *wl) +{ + u16 clk_freq; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + /* TODO: PG2: apparently we need to read the clk type */ + + ret = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT, &clk_freq); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq, + wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m, + wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q, + wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit"); + + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, + wl18xx_clk_table[clk_freq].n); + if (ret < 0) + goto out; + + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, + wl18xx_clk_table[clk_freq].m); + if (ret < 0) + goto out; + + if (wl18xx_clk_table[clk_freq].swallow) { + /* first the 16 lower bits */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1, + wl18xx_clk_table[clk_freq].q & + PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK); + if (ret < 0) + goto out; + + /* then the 16 higher bits, masked out */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2, + (wl18xx_clk_table[clk_freq].q >> 16) & + PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK); + if (ret < 0) + goto out; + + /* first the 16 lower bits */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1, + wl18xx_clk_table[clk_freq].p & + PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK); + if (ret < 0) + goto out; + + /* then the 16 higher bits, masked out */ + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2, + (wl18xx_clk_table[clk_freq].p >> 16) & + PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK); + } else { + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN, + PLLSH_WCS_PLL_SWALLOW_EN_VAL2); + } + +out: + return ret; +} + +static int wl18xx_boot_soft_reset(struct wl1271 *wl) +{ + int ret; + + /* disable Rx/Tx */ + ret = wlcore_write32(wl, WL18XX_ENABLE, 0x0); + if (ret < 0) + goto out; + + /* disable auto calibration on start*/ + ret = wlcore_write32(wl, WL18XX_SPARE_A2, 0xffff); + +out: + return ret; +} + +static int wl18xx_pre_boot(struct wl1271 *wl) +{ + int ret; + + ret = wl18xx_set_clk(wl); + if (ret < 0) + goto out; + + /* Continue the ELP wake up sequence */ + ret = wlcore_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + if (ret < 0) + goto out; + + udelay(500); + + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + if (ret < 0) + goto out; + + /* Disable interrupts */ + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + if (ret < 0) + goto out; + + ret = wl18xx_boot_soft_reset(wl); + +out: + return ret; +} + +static int wl18xx_pre_upload(struct wl1271 *wl) +{ + u32 tmp; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + if (ret < 0) + goto out; + + /* TODO: check if this is all needed */ + ret = wlcore_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND); + if (ret < 0) + goto out; + + ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); + + ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp); + +out: + return ret; +} + +static int wl18xx_set_mac_and_phy(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + struct wl18xx_mac_and_phy_params *params; + int ret; + + params = kmemdup(&priv->conf.phy, sizeof(*params), GFP_KERNEL); + if (!params) { + ret = -ENOMEM; + goto out; + } + + ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + if (ret < 0) + goto out; + + ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, params, + sizeof(*params), false); + +out: + kfree(params); + return ret; +} + +static int wl18xx_enable_interrupts(struct wl1271 *wl) +{ + u32 event_mask, intr_mask; + int ret; + + event_mask = WL18XX_ACX_EVENTS_VECTOR; + intr_mask = WL18XX_INTR_MASK; + + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask); + if (ret < 0) + goto out; + + wlcore_enable_interrupts(wl); + + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~intr_mask); + +out: + return ret; +} + +static int wl18xx_boot(struct wl1271 *wl) +{ + int ret; + + ret = wl18xx_pre_boot(wl); + if (ret < 0) + goto out; + + ret = wl18xx_pre_upload(wl); + if (ret < 0) + goto out; + + ret = wlcore_boot_upload_firmware(wl); + if (ret < 0) + goto out; + + ret = wl18xx_set_mac_and_phy(wl); + if (ret < 0) + goto out; + + ret = wlcore_boot_run_firmware(wl); + if (ret < 0) + goto out; + + ret = wl18xx_enable_interrupts(wl); + +out: + return ret; +} + +static int wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr, + void *buf, size_t len) +{ + struct wl18xx_priv *priv = wl->priv; + + memcpy(priv->cmd_buf, buf, len); + memset(priv->cmd_buf + len, 0, WL18XX_CMD_MAX_SIZE - len); + + return wlcore_write(wl, cmd_box_addr, priv->cmd_buf, + WL18XX_CMD_MAX_SIZE, false); +} + +static int wl18xx_ack_event(struct wl1271 *wl) +{ + return wlcore_write_reg(wl, REG_INTERRUPT_TRIG, + WL18XX_INTR_TRIG_EVENT_ACK); +} + +static u32 wl18xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks) +{ + u32 blk_size = WL18XX_TX_HW_BLOCK_SIZE; + return (len + blk_size - 1) / blk_size + spare_blks; +} + +static void +wl18xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, + u32 blks, u32 spare_blks) +{ + desc->wl18xx_mem.total_mem_blocks = blks; +} + +static void +wl18xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, + struct sk_buff *skb) +{ + desc->length = cpu_to_le16(skb->len); + + /* if only the last frame is to be padded, we unset this bit on Tx */ + if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) + desc->wl18xx_mem.ctrl = WL18XX_TX_CTRL_NOT_PADDED; + else + desc->wl18xx_mem.ctrl = 0; + + wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d " + "len: %d life: %d mem: %d", desc->hlid, + le16_to_cpu(desc->length), + le16_to_cpu(desc->life_time), + desc->wl18xx_mem.total_mem_blocks); +} + +static enum wl_rx_buf_align +wl18xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc) +{ + if (rx_desc & RX_BUF_PADDED_PAYLOAD) + return WLCORE_RX_BUF_PADDED; + + return WLCORE_RX_BUF_ALIGNED; +} + +static u32 wl18xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data, + u32 data_len) +{ + struct wl1271_rx_descriptor *desc = rx_data; + + /* invalid packet */ + if (data_len < sizeof(*desc)) + return 0; + + return data_len - sizeof(*desc); +} + +static void wl18xx_tx_immediate_completion(struct wl1271 *wl) +{ + wl18xx_tx_immediate_complete(wl); +} + +static int wl18xx_set_host_cfg_bitmap(struct wl1271 *wl, u32 extra_mem_blk) +{ + int ret; + u32 sdio_align_size = 0; + u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE | + HOST_IF_CFG_ADD_RX_ALIGNMENT; + + /* Enable Tx SDIO padding */ + if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) { + host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; + sdio_align_size = WL12XX_BUS_BLOCK_SIZE; + } + + /* Enable Rx SDIO padding */ + if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) { + host_cfg_bitmap |= HOST_IF_CFG_RX_PAD_TO_SDIO_BLK; + sdio_align_size = WL12XX_BUS_BLOCK_SIZE; + } + + ret = wl18xx_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap, + sdio_align_size, extra_mem_blk, + WL18XX_HOST_IF_LEN_SIZE_FIELD); + if (ret < 0) + return ret; + + return 0; +} + +static int wl18xx_hw_init(struct wl1271 *wl) +{ + int ret; + struct wl18xx_priv *priv = wl->priv; + + /* (re)init private structures. Relevant on recovery as well. */ + priv->last_fw_rls_idx = 0; + priv->extra_spare_vif_count = 0; + + /* set the default amount of spare blocks in the bitmap */ + ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); + if (ret < 0) + return ret; + + if (checksum_param) { + ret = wl18xx_acx_set_checksum_state(wl); + if (ret != 0) + return ret; + } + + return ret; +} + +static void wl18xx_set_tx_desc_csum(struct wl1271 *wl, + struct wl1271_tx_hw_descr *desc, + struct sk_buff *skb) +{ + u32 ip_hdr_offset; + struct iphdr *ip_hdr; + + if (!checksum_param) { + desc->wl18xx_checksum_data = 0; + return; + } + + if (skb->ip_summed != CHECKSUM_PARTIAL) { + desc->wl18xx_checksum_data = 0; + return; + } + + ip_hdr_offset = skb_network_header(skb) - skb_mac_header(skb); + if (WARN_ON(ip_hdr_offset >= (1<<7))) { + desc->wl18xx_checksum_data = 0; + return; + } + + desc->wl18xx_checksum_data = ip_hdr_offset << 1; + + /* FW is interested only in the LSB of the protocol TCP=0 UDP=1 */ + ip_hdr = (void *)skb_network_header(skb); + desc->wl18xx_checksum_data |= (ip_hdr->protocol & 0x01); +} + +static void wl18xx_set_rx_csum(struct wl1271 *wl, + struct wl1271_rx_descriptor *desc, + struct sk_buff *skb) +{ + if (desc->status & WL18XX_RX_CHECKSUM_MASK) + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +static bool wl18xx_is_mimo_supported(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + + return priv->conf.phy.number_of_assembled_ant2_4 >= 2; +} + +/* + * TODO: instead of having these two functions to get the rate mask, + * we should modify the wlvif->rate_set instead + */ +static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + u32 hw_rate_set = wlvif->rate_set; + + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); + hw_rate_set |= CONF_TX_RATE_USE_WIDE_CHAN; + + /* we don't support MIMO in wide-channel mode */ + hw_rate_set &= ~CONF_TX_MIMO_RATES; + } else if (wl18xx_is_mimo_supported(wl)) { + wl1271_debug(DEBUG_ACX, "using MIMO channel rate mask"); + hw_rate_set |= CONF_TX_MIMO_RATES; + } + + return hw_rate_set; +} + +static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); + + /* sanity check - we don't support this */ + if (WARN_ON(wlvif->band != IEEE80211_BAND_5GHZ)) + return 0; + + return CONF_TX_RATE_USE_WIDE_CHAN; + } else if (wl18xx_is_mimo_supported(wl) && + wlvif->band == IEEE80211_BAND_2GHZ) { + wl1271_debug(DEBUG_ACX, "using MIMO rate mask"); + /* + * we don't care about HT channel here - if a peer doesn't + * support MIMO, we won't enable it in its rates + */ + return CONF_TX_MIMO_RATES; + } else { + return 0; + } +} + +static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver) +{ + u32 fuse; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse); + if (ret < 0) + goto out; + + if (ver) + *ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + +out: + return ret; +} + +#define WL18XX_CONF_FILE_NAME "ti-connectivity/wl18xx-conf.bin" +static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev) +{ + struct wl18xx_priv *priv = wl->priv; + struct wlcore_conf_file *conf_file; + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, WL18XX_CONF_FILE_NAME, dev); + if (ret < 0) { + wl1271_error("could not get configuration binary %s: %d", + WL18XX_CONF_FILE_NAME, ret); + goto out_fallback; + } + + if (fw->size != WL18XX_CONF_SIZE) { + wl1271_error("configuration binary file size is wrong, expected %zu got %zu", + WL18XX_CONF_SIZE, fw->size); + ret = -EINVAL; + goto out; + } + + conf_file = (struct wlcore_conf_file *) fw->data; + + if (conf_file->header.magic != cpu_to_le32(WL18XX_CONF_MAGIC)) { + wl1271_error("configuration binary file magic number mismatch, " + "expected 0x%0x got 0x%0x", WL18XX_CONF_MAGIC, + conf_file->header.magic); + ret = -EINVAL; + goto out; + } + + if (conf_file->header.version != cpu_to_le32(WL18XX_CONF_VERSION)) { + wl1271_error("configuration binary file version not supported, " + "expected 0x%08x got 0x%08x", + WL18XX_CONF_VERSION, conf_file->header.version); + ret = -EINVAL; + goto out; + } + + memcpy(&wl->conf, &conf_file->core, sizeof(wl18xx_conf)); + memcpy(&priv->conf, &conf_file->priv, sizeof(priv->conf)); + + goto out; + +out_fallback: + wl1271_warning("falling back to default config"); + + /* apply driver default configuration */ + memcpy(&wl->conf, &wl18xx_conf, sizeof(wl18xx_conf)); + /* apply default private configuration */ + memcpy(&priv->conf, &wl18xx_default_priv_conf, sizeof(priv->conf)); + + /* For now we just fallback */ + return 0; + +out: + release_firmware(fw); + return ret; +} + +static int wl18xx_plt_init(struct wl1271 *wl) +{ + int ret; + + /* calibrator based auto/fem detect not supported for 18xx */ + if (wl->plt_mode == PLT_FEM_DETECT) { + wl1271_error("wl18xx_plt_init: PLT FEM_DETECT not supported"); + return -EINVAL; + } + + ret = wlcore_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT); + if (ret < 0) + return ret; + + return wl->ops->boot(wl); +} + +static int wl18xx_get_mac(struct wl1271 *wl) +{ + u32 mac1, mac2; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2, &mac2); + if (ret < 0) + goto out; + + /* these are the two parts of the BD_ADDR */ + wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) + + ((mac1 & 0xff000000) >> 24); + wl->fuse_nic_addr = (mac1 & 0xffffff); + + ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]); + +out: + return ret; +} + +static int wl18xx_handle_static_data(struct wl1271 *wl, + struct wl1271_static_data *static_data) +{ + struct wl18xx_static_data_priv *static_data_priv = + (struct wl18xx_static_data_priv *) static_data->priv; + + wl1271_info("PHY firmware version: %s", static_data_priv->phy_version); + + return 0; +} + +static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) +{ + struct wl18xx_priv *priv = wl->priv; + + /* If we have VIFs requiring extra spare, indulge them */ + if (priv->extra_spare_vif_count) + return WL18XX_TX_HW_EXTRA_BLOCK_SPARE; + + return WL18XX_TX_HW_BLOCK_SPARE; +} + +static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key_conf) +{ + struct wl18xx_priv *priv = wl->priv; + bool change_spare = false; + int ret; + + /* + * when adding the first or removing the last GEM/TKIP interface, + * we have to adjust the number of spare blocks. + */ + change_spare = (key_conf->cipher == WL1271_CIPHER_SUITE_GEM || + key_conf->cipher == WLAN_CIPHER_SUITE_TKIP) && + ((priv->extra_spare_vif_count == 0 && cmd == SET_KEY) || + (priv->extra_spare_vif_count == 1 && cmd == DISABLE_KEY)); + + /* no need to change spare - just regular set_key */ + if (!change_spare) + return wlcore_set_key(wl, cmd, vif, sta, key_conf); + + /* + * stop the queues and flush to ensure the next packets are + * in sync with FW spare block accounting + */ + wlcore_stop_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK); + wl1271_tx_flush(wl); + + ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); + if (ret < 0) + goto out; + + /* key is now set, change the spare blocks */ + if (cmd == SET_KEY) { + ret = wl18xx_set_host_cfg_bitmap(wl, + WL18XX_TX_HW_EXTRA_BLOCK_SPARE); + if (ret < 0) + goto out; + + priv->extra_spare_vif_count++; + } else { + ret = wl18xx_set_host_cfg_bitmap(wl, + WL18XX_TX_HW_BLOCK_SPARE); + if (ret < 0) + goto out; + + priv->extra_spare_vif_count--; + } + +out: + wlcore_wake_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK); + return ret; +} + +static u32 wl18xx_pre_pkt_send(struct wl1271 *wl, + u32 buf_offset, u32 last_len) +{ + if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) { + struct wl1271_tx_hw_descr *last_desc; + + /* get the last TX HW descriptor written to the aggr buf */ + last_desc = (struct wl1271_tx_hw_descr *)(wl->aggr_buf + + buf_offset - last_len); + + /* the last frame is padded up to an SDIO block */ + last_desc->wl18xx_mem.ctrl &= ~WL18XX_TX_CTRL_NOT_PADDED; + return ALIGN(buf_offset, WL12XX_BUS_BLOCK_SIZE); + } + + /* no modifications */ + return buf_offset; +} + +static struct wlcore_ops wl18xx_ops = { + .identify_chip = wl18xx_identify_chip, + .boot = wl18xx_boot, + .plt_init = wl18xx_plt_init, + .trigger_cmd = wl18xx_trigger_cmd, + .ack_event = wl18xx_ack_event, + .calc_tx_blocks = wl18xx_calc_tx_blocks, + .set_tx_desc_blocks = wl18xx_set_tx_desc_blocks, + .set_tx_desc_data_len = wl18xx_set_tx_desc_data_len, + .get_rx_buf_align = wl18xx_get_rx_buf_align, + .get_rx_packet_len = wl18xx_get_rx_packet_len, + .tx_immediate_compl = wl18xx_tx_immediate_completion, + .tx_delayed_compl = NULL, + .hw_init = wl18xx_hw_init, + .set_tx_desc_csum = wl18xx_set_tx_desc_csum, + .get_pg_ver = wl18xx_get_pg_ver, + .set_rx_csum = wl18xx_set_rx_csum, + .sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask, + .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask, + .get_mac = wl18xx_get_mac, + .debugfs_init = wl18xx_debugfs_add_files, + .handle_static_data = wl18xx_handle_static_data, + .get_spare_blocks = wl18xx_get_spare_blocks, + .set_key = wl18xx_set_key, + .pre_pkt_send = wl18xx_pre_pkt_send, +}; + +/* HT cap appropriate for wide channels in 2Ghz */ +static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { + .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(150), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +/* HT cap appropriate for wide channels in 5Ghz */ +static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { + .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_SUP_WIDTH_20_40, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(150), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +/* HT cap appropriate for SISO 20 */ +static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { + .cap = IEEE80211_HT_CAP_SGI_20, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(72), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +/* HT cap appropriate for MIMO rates in 20mhz channel */ +static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = { + .cap = IEEE80211_HT_CAP_SGI_20, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(144), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +static int __devinit wl18xx_probe(struct platform_device *pdev) +{ + struct wl1271 *wl; + struct ieee80211_hw *hw; + struct wl18xx_priv *priv; + int ret; + + hw = wlcore_alloc_hw(sizeof(*priv)); + if (IS_ERR(hw)) { + wl1271_error("can't allocate hw"); + ret = PTR_ERR(hw); + goto out; + } + + wl = hw->priv; + priv = wl->priv; + wl->ops = &wl18xx_ops; + wl->ptable = wl18xx_ptable; + wl->rtable = wl18xx_rtable; + wl->num_tx_desc = 32; + wl->num_rx_desc = 32; + wl->band_rate_to_idx = wl18xx_band_rate_to_idx; + wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX; + wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0; + wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv); + wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics); + wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv); + + if (num_rx_desc_param != -1) + wl->num_rx_desc = num_rx_desc_param; + + ret = wl18xx_conf_init(wl, &pdev->dev); + if (ret < 0) + goto out_free; + + /* If the module param is set, update it in conf */ + if (board_type_param) { + if (!strcmp(board_type_param, "fpga")) { + priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX; + } else if (!strcmp(board_type_param, "hdk")) { + priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX; + } else if (!strcmp(board_type_param, "dvp")) { + priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX; + } else if (!strcmp(board_type_param, "evb")) { + priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX; + } else if (!strcmp(board_type_param, "com8")) { + priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX; + } else { + wl1271_error("invalid board type '%s'", + board_type_param); + ret = -EINVAL; + goto out_free; + } + } + + /* HACK! Just for now we hardcode COM8 and HDK to 0x06 */ + switch (priv->conf.phy.board_type) { + case BOARD_TYPE_HDK_18XX: + case BOARD_TYPE_COM8_18XX: + priv->conf.phy.low_band_component_type = 0x06; + break; + case BOARD_TYPE_FPGA_18XX: + case BOARD_TYPE_DVP_18XX: + case BOARD_TYPE_EVB_18XX: + priv->conf.phy.low_band_component_type = 0x05; + break; + default: + wl1271_error("invalid board type '%d'", + priv->conf.phy.board_type); + ret = -EINVAL; + goto out_free; + } + + if (low_band_component_param != -1) + priv->conf.phy.low_band_component = low_band_component_param; + if (low_band_component_type_param != -1) + priv->conf.phy.low_band_component_type = + low_band_component_type_param; + if (high_band_component_param != -1) + priv->conf.phy.high_band_component = high_band_component_param; + if (high_band_component_type_param != -1) + priv->conf.phy.high_band_component_type = + high_band_component_type_param; + if (pwr_limit_reference_11_abg_param != -1) + priv->conf.phy.pwr_limit_reference_11_abg = + pwr_limit_reference_11_abg_param; + if (n_antennas_2_param != -1) + priv->conf.phy.number_of_assembled_ant2_4 = n_antennas_2_param; + if (n_antennas_5_param != -1) + priv->conf.phy.number_of_assembled_ant5 = n_antennas_5_param; + if (dc2dc_param != -1) + priv->conf.phy.external_pa_dc2dc = dc2dc_param; + + if (ht_mode_param) { + if (!strcmp(ht_mode_param, "default")) + priv->conf.ht.mode = HT_MODE_DEFAULT; + else if (!strcmp(ht_mode_param, "wide")) + priv->conf.ht.mode = HT_MODE_WIDE; + else if (!strcmp(ht_mode_param, "siso20")) + priv->conf.ht.mode = HT_MODE_SISO20; + else { + wl1271_error("invalid ht_mode '%s'", ht_mode_param); + ret = -EINVAL; + goto out_free; + } + } + + if (priv->conf.ht.mode == HT_MODE_DEFAULT) { + /* + * Only support mimo with multiple antennas. Fall back to + * siso20. + */ + if (wl18xx_is_mimo_supported(wl)) + wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + &wl18xx_mimo_ht_cap_2ghz); + else + wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + &wl18xx_siso20_ht_cap); + + /* 5Ghz is always wide */ + wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, + &wl18xx_siso40_ht_cap_5ghz); + } else if (priv->conf.ht.mode == HT_MODE_WIDE) { + wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + &wl18xx_siso40_ht_cap_2ghz); + wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, + &wl18xx_siso40_ht_cap_5ghz); + } else if (priv->conf.ht.mode == HT_MODE_SISO20) { + wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + &wl18xx_siso20_ht_cap); + wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, + &wl18xx_siso20_ht_cap); + } + + if (!checksum_param) { + wl18xx_ops.set_rx_csum = NULL; + wl18xx_ops.init_vif = NULL; + } + + wl->enable_11a = enable_11a_param; + + return wlcore_probe(wl, pdev); + +out_free: + wlcore_free_hw(wl); +out: + return ret; +} + +static const struct platform_device_id wl18xx_id_table[] __devinitconst = { + { "wl18xx", 0 }, + { } /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(platform, wl18xx_id_table); + +static struct platform_driver wl18xx_driver = { + .probe = wl18xx_probe, + .remove = __devexit_p(wlcore_remove), + .id_table = wl18xx_id_table, + .driver = { + .name = "wl18xx_driver", + .owner = THIS_MODULE, + } +}; + +static int __init wl18xx_init(void) +{ + return platform_driver_register(&wl18xx_driver); +} +module_init(wl18xx_init); + +static void __exit wl18xx_exit(void) +{ + platform_driver_unregister(&wl18xx_driver); +} +module_exit(wl18xx_exit); + +module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR); +MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or siso20"); + +module_param_named(board_type, board_type_param, charp, S_IRUSR); +MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or " + "dvp"); + +module_param_named(checksum, checksum_param, bool, S_IRUSR); +MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)"); + +module_param_named(enable_11a, enable_11a_param, bool, S_IRUSR); +MODULE_PARM_DESC(enable_11a, "Enable 11a (5GHz): boolean (defaults to true)"); + +module_param_named(dc2dc, dc2dc_param, int, S_IRUSR); +MODULE_PARM_DESC(dc2dc, "External DC2DC: u8 (defaults to 0)"); + +module_param_named(n_antennas_2, n_antennas_2_param, int, S_IRUSR); +MODULE_PARM_DESC(n_antennas_2, + "Number of installed 2.4GHz antennas: 1 (default) or 2"); + +module_param_named(n_antennas_5, n_antennas_5_param, int, S_IRUSR); +MODULE_PARM_DESC(n_antennas_5, + "Number of installed 5GHz antennas: 1 (default) or 2"); + +module_param_named(low_band_component, low_band_component_param, int, + S_IRUSR); +MODULE_PARM_DESC(low_band_component, "Low band component: u8 " + "(default is 0x01)"); + +module_param_named(low_band_component_type, low_band_component_type_param, + int, S_IRUSR); +MODULE_PARM_DESC(low_band_component_type, "Low band component type: u8 " + "(default is 0x05 or 0x06 depending on the board_type)"); + +module_param_named(high_band_component, high_band_component_param, int, + S_IRUSR); +MODULE_PARM_DESC(high_band_component, "High band component: u8, " + "(default is 0x01)"); + +module_param_named(high_band_component_type, high_band_component_type_param, + int, S_IRUSR); +MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 " + "(default is 0x09)"); + +module_param_named(pwr_limit_reference_11_abg, + pwr_limit_reference_11_abg_param, int, S_IRUSR); +MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 " + "(default is 0xc8)"); + +module_param_named(num_rx_desc, + num_rx_desc_param, int, S_IRUSR); +MODULE_PARM_DESC(num_rx_desc_param, + "Number of Rx descriptors: u8 (default is 32)"); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); +MODULE_FIRMWARE(WL18XX_FW_NAME); |