summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ti/wl18xx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ti/wl18xx')
-rw-r--r--drivers/net/wireless/ti/wl18xx/Makefile2
-rw-r--r--drivers/net/wireless/ti/wl18xx/acx.c87
-rw-r--r--drivers/net/wireless/ti/wl18xx/acx.h55
-rw-r--r--drivers/net/wireless/ti/wl18xx/cmd.c80
-rw-r--r--drivers/net/wireless/ti/wl18xx/cmd.h52
-rw-r--r--drivers/net/wireless/ti/wl18xx/conf.h22
-rw-r--r--drivers/net/wireless/ti/wl18xx/event.c111
-rw-r--r--drivers/net/wireless/ti/wl18xx/event.h77
-rw-r--r--drivers/net/wireless/ti/wl18xx/main.c272
-rw-r--r--drivers/net/wireless/ti/wl18xx/scan.c326
-rw-r--r--drivers/net/wireless/ti/wl18xx/scan.h127
-rw-r--r--drivers/net/wireless/ti/wl18xx/tx.c54
-rw-r--r--drivers/net/wireless/ti/wl18xx/wl18xx.h50
13 files changed, 1246 insertions, 69 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile
index 67c098734c7..ae2b8173578 100644
--- a/drivers/net/wireless/ti/wl18xx/Makefile
+++ b/drivers/net/wireless/ti/wl18xx/Makefile
@@ -1,3 +1,3 @@
-wl18xx-objs = main.o acx.o tx.o io.o debugfs.o
+wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o event.o
obj-$(CONFIG_WL18XX) += wl18xx.o
diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c
index 72840e23bf5..a169bb5a5db 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.c
+++ b/drivers/net/wireless/ti/wl18xx/acx.c
@@ -75,7 +75,7 @@ int wl18xx_acx_set_checksum_state(struct wl1271 *wl)
acx->checksum_state = CHECKSUM_OFFLOAD_ENABLED;
- ret = wl1271_cmd_configure(wl, ACX_CHECKSUM_CONFIG, acx, sizeof(*acx));
+ ret = wl1271_cmd_configure(wl, ACX_CSUM_CONFIG, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("failed to set Tx checksum state: %d", ret);
goto out;
@@ -109,3 +109,88 @@ out:
kfree(acx);
return ret;
}
+
+int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide)
+{
+ struct wlcore_peer_ht_operation_mode *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d",
+ hlid, wide);
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->hlid = hlid;
+ acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ;
+
+ ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx,
+ sizeof(*acx));
+
+ if (ret < 0) {
+ wl1271_warning("acx peer ht operation mode failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+
+}
+
+/*
+ * this command is basically the same as wl1271_acx_ht_capabilities,
+ * with the addition of supported rates. they should be unified in
+ * the next fw api change
+ */
+int wl18xx_acx_set_peer_cap(struct wl1271 *wl,
+ struct ieee80211_sta_ht_cap *ht_cap,
+ bool allow_ht_operation,
+ u32 rate_set, u8 hlid)
+{
+ struct wlcore_acx_peer_cap *acx;
+ int ret = 0;
+ u32 ht_capabilites = 0;
+
+ wl1271_debug(DEBUG_ACX,
+ "acx set cap ht_supp: %d ht_cap: %d rates: 0x%x",
+ ht_cap->ht_supported, ht_cap->cap, rate_set);
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (allow_ht_operation && ht_cap->ht_supported) {
+ /* no need to translate capabilities - use the spec values */
+ ht_capabilites = ht_cap->cap;
+
+ /*
+ * this bit is not employed by the spec but only by FW to
+ * indicate peer HT support
+ */
+ ht_capabilites |= WL12XX_HT_CAP_HT_OPERATION;
+
+ /* get data from A-MPDU parameters field */
+ acx->ampdu_max_length = ht_cap->ampdu_factor;
+ acx->ampdu_min_spacing = ht_cap->ampdu_density;
+ }
+
+ acx->hlid = hlid;
+ acx->ht_capabilites = cpu_to_le32(ht_capabilites);
+ acx->supported_rates = cpu_to_le32(rate_set);
+
+ ret = wl1271_cmd_configure(wl, ACX_PEER_CAP, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("acx ht capabilities setting failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h
index e2609a6b734..0e636def121 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.h
+++ b/drivers/net/wireless/ti/wl18xx/acx.h
@@ -26,7 +26,13 @@
#include "../wlcore/acx.h"
enum {
- ACX_CLEAR_STATISTICS = 0x0047,
+ ACX_NS_IPV6_FILTER = 0x0050,
+ ACX_PEER_HT_OPERATION_MODE_CFG = 0x0051,
+ ACX_CSUM_CONFIG = 0x0052,
+ ACX_SIM_CONFIG = 0x0053,
+ ACX_CLEAR_STATISTICS = 0x0054,
+ ACX_AUTO_RX_STREAMING = 0x0055,
+ ACX_PEER_CAP = 0x0056
};
/* numbers of bits the length field takes (add 1 for the actual number) */
@@ -278,10 +284,57 @@ struct wl18xx_acx_clear_statistics {
struct acx_header header;
};
+enum wlcore_bandwidth {
+ WLCORE_BANDWIDTH_20MHZ,
+ WLCORE_BANDWIDTH_40MHZ,
+};
+
+struct wlcore_peer_ht_operation_mode {
+ struct acx_header header;
+
+ u8 hlid;
+ u8 bandwidth; /* enum wlcore_bandwidth */
+ u8 padding[2];
+};
+
+/*
+ * ACX_PEER_CAP
+ * this struct is very similar to wl1271_acx_ht_capabilities, with the
+ * addition of supported rates
+ */
+struct wlcore_acx_peer_cap {
+ struct acx_header header;
+
+ /* bitmask of capability bits supported by the peer */
+ __le32 ht_capabilites;
+
+ /* rates supported by the remote peer */
+ __le32 supported_rates;
+
+ /* Indicates to which link these capabilities apply. */
+ u8 hlid;
+
+ /*
+ * This the maximum A-MPDU length supported by the AP. The FW may not
+ * exceed this length when sending A-MPDUs
+ */
+ u8 ampdu_max_length;
+
+ /* This is the minimal spacing required when sending A-MPDUs to the AP*/
+ u8 ampdu_min_spacing;
+
+ u8 padding;
+} __packed;
+
int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap,
u32 sdio_blk_size, u32 extra_mem_blks,
u32 len_field_size);
int wl18xx_acx_set_checksum_state(struct wl1271 *wl);
int wl18xx_acx_clear_statistics(struct wl1271 *wl);
+int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide);
+int wl18xx_acx_set_peer_cap(struct wl1271 *wl,
+ struct ieee80211_sta_ht_cap *ht_cap,
+ bool allow_ht_operation,
+ u32 rate_set, u8 hlid);
#endif /* __WL18XX_ACX_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/cmd.c b/drivers/net/wireless/ti/wl18xx/cmd.c
new file mode 100644
index 00000000000..1d1f6cc7a50
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/cmd.c
@@ -0,0 +1,80 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "../wlcore/cmd.h"
+#include "../wlcore/debug.h"
+#include "../wlcore/hw_ops.h"
+
+#include "cmd.h"
+
+int wl18xx_cmd_channel_switch(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ struct wl18xx_cmd_channel_switch *cmd;
+ u32 supported_rates;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "cmd channel switch");
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->role_id = wlvif->role_id;
+ cmd->channel = ch_switch->channel->hw_value;
+ cmd->switch_time = ch_switch->count;
+ cmd->stop_tx = ch_switch->block_tx;
+
+ switch (ch_switch->channel->band) {
+ case IEEE80211_BAND_2GHZ:
+ cmd->band = WLCORE_BAND_2_4GHZ;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ cmd->band = WLCORE_BAND_5GHZ;
+ break;
+ default:
+ wl1271_error("invalid channel switch band: %d",
+ ch_switch->channel->band);
+ ret = -EINVAL;
+ goto out_free;
+ }
+
+ supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES |
+ wlcore_hw_sta_get_ap_rate_mask(wl, wlvif);
+ if (wlvif->p2p)
+ supported_rates &= ~CONF_TX_CCK_RATES;
+ cmd->local_supported_rates = cpu_to_le32(supported_rates);
+ cmd->channel_type = wlvif->channel_type;
+
+ ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0);
+ if (ret < 0) {
+ wl1271_error("failed to send channel switch command");
+ goto out_free;
+ }
+
+out_free:
+ kfree(cmd);
+out:
+ return ret;
+}
diff --git a/drivers/net/wireless/ti/wl18xx/cmd.h b/drivers/net/wireless/ti/wl18xx/cmd.h
new file mode 100644
index 00000000000..6687d10899a
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/cmd.h
@@ -0,0 +1,52 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_CMD_H__
+#define __WL18XX_CMD_H__
+
+#include "../wlcore/wlcore.h"
+#include "../wlcore/acx.h"
+
+struct wl18xx_cmd_channel_switch {
+ struct wl1271_cmd_header header;
+
+ u8 role_id;
+
+ /* The new serving channel */
+ u8 channel;
+ /* Relative time of the serving channel switch in TBTT units */
+ u8 switch_time;
+ /* Stop the role TX, should expect it after radar detection */
+ u8 stop_tx;
+
+ __le32 local_supported_rates;
+
+ u8 channel_type;
+ u8 band;
+
+ u8 padding[2];
+} __packed;
+
+int wl18xx_cmd_channel_switch(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif,
+ struct ieee80211_channel_switch *ch_switch);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h
index 4d426cc2027..e34302e3b51 100644
--- a/drivers/net/wireless/ti/wl18xx/conf.h
+++ b/drivers/net/wireless/ti/wl18xx/conf.h
@@ -23,20 +23,21 @@
#define __WL18XX_CONF_H__
#define WL18XX_CONF_MAGIC 0x10e100ca
-#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0003)
+#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0006)
#define WL18XX_CONF_MASK 0x0000ffff
#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
sizeof(struct wl18xx_priv_conf))
#define NUM_OF_CHANNELS_11_ABG 150
#define NUM_OF_CHANNELS_11_P 7
-#define WL18XX_NUM_OF_SUB_BANDS 9
#define SRF_TABLE_LEN 16
#define PIN_MUXING_SIZE 2
+#define WL18XX_TRACE_LOSS_GAPS_TX 10
+#define WL18XX_TRACE_LOSS_GAPS_RX 18
struct wl18xx_mac_and_phy_params {
u8 phy_standalone;
- u8 rdl;
+ u8 spare0;
u8 enable_clpc;
u8 enable_tx_low_pwr_on_siso_rdl;
u8 auto_detect;
@@ -69,18 +70,27 @@ struct wl18xx_mac_and_phy_params {
u8 pwr_limit_reference_11_abg;
u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
u8 pwr_limit_reference_11p;
- u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
- u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
+ u8 spare1;
+ u8 per_chan_bo_mode_11_abg[13];
+ u8 per_chan_bo_mode_11_p[4];
u8 primary_clock_setting_time;
u8 clock_valid_on_wake_up;
u8 secondary_clock_setting_time;
u8 board_type;
/* enable point saturation */
u8 psat;
- /* low/medium/high Tx power in dBm */
+ /* low/medium/high Tx power in dBm for STA-HP BG */
s8 low_power_val;
s8 med_power_val;
s8 high_power_val;
+ s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX];
+ s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX];
+ u8 tx_rf_margin;
+ /* low/medium/high Tx power in dBm for other role */
+ s8 low_power_val_2nd;
+ s8 med_power_val_2nd;
+ s8 high_power_val_2nd;
+
u8 padding[1];
} __packed;
diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c
new file mode 100644
index 00000000000..c9199d7804c
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/event.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2012 Texas Instruments. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "event.h"
+#include "scan.h"
+#include "../wlcore/cmd.h"
+#include "../wlcore/debug.h"
+
+int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event,
+ bool *timeout)
+{
+ u32 local_event;
+
+ switch (event) {
+ case WLCORE_EVENT_PEER_REMOVE_COMPLETE:
+ local_event = PEER_REMOVE_COMPLETE_EVENT_ID;
+ break;
+
+ case WLCORE_EVENT_DFS_CONFIG_COMPLETE:
+ local_event = DFS_CHANNELS_CONFIG_COMPLETE_EVENT;
+ break;
+
+ default:
+ /* event not implemented */
+ return 0;
+ }
+ return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout);
+}
+
+int wl18xx_process_mailbox_events(struct wl1271 *wl)
+{
+ struct wl18xx_event_mailbox *mbox = wl->mbox;
+ u32 vector;
+
+ vector = le32_to_cpu(mbox->events_vector);
+ wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector);
+
+ if (vector & SCAN_COMPLETE_EVENT_ID) {
+ wl1271_debug(DEBUG_EVENT, "scan results: %d",
+ mbox->number_of_scan_results);
+
+ if (wl->scan_wlvif)
+ wl18xx_scan_completed(wl, wl->scan_wlvif);
+ }
+
+ if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) {
+ wl1271_debug(DEBUG_EVENT,
+ "PERIODIC_SCAN_REPORT_EVENT (results %d)",
+ mbox->number_of_sched_scan_results);
+
+ wlcore_scan_sched_scan_results(wl);
+ }
+
+ if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID)
+ wlcore_event_sched_scan_completed(wl, 1);
+
+ if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID)
+ wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric);
+
+ if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID)
+ wlcore_event_ba_rx_constraint(wl,
+ le16_to_cpu(mbox->rx_ba_role_id_bitmap),
+ le16_to_cpu(mbox->rx_ba_allowed_bitmap));
+
+ if (vector & BSS_LOSS_EVENT_ID)
+ wlcore_event_beacon_loss(wl,
+ le16_to_cpu(mbox->bss_loss_bitmap));
+
+ if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID)
+ wlcore_event_channel_switch(wl,
+ le16_to_cpu(mbox->channel_switch_role_id_bitmap),
+ true);
+
+ if (vector & DUMMY_PACKET_EVENT_ID)
+ wlcore_event_dummy_packet(wl);
+
+ /*
+ * "TX retries exceeded" has a different meaning according to mode.
+ * In AP mode the offending station is disconnected.
+ */
+ if (vector & MAX_TX_FAILURE_EVENT_ID)
+ wlcore_event_max_tx_failure(wl,
+ le32_to_cpu(mbox->tx_retry_exceeded_bitmap));
+
+ if (vector & INACTIVE_STA_EVENT_ID)
+ wlcore_event_inactive_sta(wl,
+ le32_to_cpu(mbox->inactive_sta_bitmap));
+
+ if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID)
+ wlcore_event_roc_complete(wl);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h
new file mode 100644
index 00000000000..398f3d2c0a6
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/event.h
@@ -0,0 +1,77 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2012 Texas Instruments. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_EVENT_H__
+#define __WL18XX_EVENT_H__
+
+#include "../wlcore/wlcore.h"
+
+enum {
+ SCAN_COMPLETE_EVENT_ID = BIT(8),
+ RADAR_DETECTED_EVENT_ID = BIT(9),
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(10),
+ BSS_LOSS_EVENT_ID = BIT(11),
+ MAX_TX_FAILURE_EVENT_ID = BIT(12),
+ DUMMY_PACKET_EVENT_ID = BIT(13),
+ INACTIVE_STA_EVENT_ID = BIT(14),
+ PEER_REMOVE_COMPLETE_EVENT_ID = BIT(15),
+ PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(16),
+ BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(17),
+ REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(18),
+ DFS_CHANNELS_CONFIG_COMPLETE_EVENT = BIT(19),
+ PERIODIC_SCAN_REPORT_EVENT_ID = BIT(20),
+};
+
+struct wl18xx_event_mailbox {
+ __le32 events_vector;
+
+ u8 number_of_scan_results;
+ u8 number_of_sched_scan_results;
+
+ __le16 channel_switch_role_id_bitmap;
+
+ s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS];
+
+ /* bitmap of removed links */
+ __le32 hlid_removed_bitmap;
+
+ /* rx ba constraint */
+ __le16 rx_ba_role_id_bitmap; /* 0xfff means any role. */
+ __le16 rx_ba_allowed_bitmap;
+
+ /* bitmap of roc completed (by role id) */
+ __le16 roc_completed_bitmap;
+
+ /* bitmap of stations (by role id) with bss loss */
+ __le16 bss_loss_bitmap;
+
+ /* bitmap of stations (by HLID) which exceeded max tx retries */
+ __le32 tx_retry_exceeded_bitmap;
+
+ /* bitmap of inactive stations (by HLID) */
+ __le32 inactive_sta_bitmap;
+} __packed;
+
+int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event,
+ bool *timeout);
+int wl18xx_process_mailbox_events(struct wl1271 *wl);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 8d8c1f8c63b..da3ef1b10a9 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -34,10 +34,13 @@
#include "reg.h"
#include "conf.h"
+#include "cmd.h"
#include "acx.h"
#include "tx.h"
#include "wl18xx.h"
#include "io.h"
+#include "scan.h"
+#include "event.h"
#include "debugfs.h"
#define WL18XX_RX_CHECKSUM_MASK 0x40
@@ -334,6 +337,8 @@ static struct wlcore_conf wl18xx_conf = {
.tmpl_short_retry_limit = 10,
.tmpl_long_retry_limit = 10,
.tx_watchdog_timeout = 5000,
+ .slow_link_thold = 3,
+ .fast_link_thold = 30,
},
.conn = {
.wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
@@ -391,8 +396,10 @@ static struct wlcore_conf wl18xx_conf = {
.scan = {
.min_dwell_time_active = 7500,
.max_dwell_time_active = 30000,
- .min_dwell_time_passive = 100000,
- .max_dwell_time_passive = 100000,
+ .min_dwell_time_active_long = 25000,
+ .max_dwell_time_active_long = 50000,
+ .dwell_time_passive = 100000,
+ .dwell_time_dfs = 150000,
.num_probe_reqs = 2,
.split_scan_timeout = 50000,
},
@@ -489,6 +496,10 @@ static struct wlcore_conf wl18xx_conf = {
.increase_time = 1,
.window_size = 16,
},
+ .recovery = {
+ .bug_on_recovery = 0,
+ .no_recovery = 0,
+ },
};
static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
@@ -501,7 +512,6 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.clock_valid_on_wake_up = 0x00,
.secondary_clock_setting_time = 0x05,
.board_type = BOARD_TYPE_HDK_18XX,
- .rdl = 0x01,
.auto_detect = 0x00,
.dedicated_fem = FEM_NONE,
.low_band_component = COMPONENT_3_WAY_SWITCH,
@@ -517,14 +527,44 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.enable_clpc = 0x00,
.enable_tx_low_pwr_on_siso_rdl = 0x00,
.rx_profile = 0x00,
- .pwr_limit_reference_11_abg = 0xc8,
+ .pwr_limit_reference_11_abg = 0x64,
+ .per_chan_pwr_limit_arr_11abg = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
+ .pwr_limit_reference_11p = 0x64,
+ .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00 },
+ .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 },
+ .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff },
.psat = 0,
- .low_power_val = 0x00,
- .med_power_val = 0x0a,
- .high_power_val = 0x1e,
+ .low_power_val = 0x08,
+ .med_power_val = 0x12,
+ .high_power_val = 0x18,
+ .low_power_val_2nd = 0x05,
+ .med_power_val_2nd = 0x0a,
+ .high_power_val_2nd = 0x14,
.external_pa_dc2dc = 0,
- .number_of_assembled_ant2_4 = 1,
+ .number_of_assembled_ant2_4 = 2,
.number_of_assembled_ant5 = 1,
+ .tx_rf_margin = 1,
},
};
@@ -595,7 +635,7 @@ static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
};
/* TODO: maybe move to a new header file? */
-#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw.bin"
+#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-2.bin"
static int wl18xx_identify_chip(struct wl1271 *wl)
{
@@ -608,15 +648,18 @@ static int wl18xx_identify_chip(struct wl1271 *wl)
wl->sr_fw_name = WL18XX_FW_NAME;
/* wl18xx uses the same firmware for PLT */
wl->plt_fw_name = WL18XX_FW_NAME;
- wl->quirks |= WLCORE_QUIRK_NO_ELP |
- WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
+ wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN |
- WLCORE_QUIRK_TX_PAD_LAST_FRAME;
-
- wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER,
- WL18XX_MAJOR_VER, WL18XX_SUBTYPE_VER,
- WL18XX_MINOR_VER);
+ WLCORE_QUIRK_TX_PAD_LAST_FRAME |
+ WLCORE_QUIRK_REGDOMAIN_CONF |
+ WLCORE_QUIRK_DUAL_PROBE_TMPL;
+
+ wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER,
+ WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER,
+ WL18XX_SUBTYPE_VER, WL18XX_MINOR_VER,
+ /* there's no separate multi-role FW */
+ 0, 0, 0, 0);
break;
case CHIP_ID_185x_PG10:
wl1271_warning("chip id 0x%x (185x PG10) is deprecated",
@@ -630,6 +673,11 @@ static int wl18xx_identify_chip(struct wl1271 *wl)
goto out;
}
+ wl->scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4;
+ wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5;
+ wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC;
+ wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC;
+ wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ;
out:
return ret;
}
@@ -843,6 +891,20 @@ static int wl18xx_boot(struct wl1271 *wl)
if (ret < 0)
goto out;
+ wl->event_mask = BSS_LOSS_EVENT_ID |
+ SCAN_COMPLETE_EVENT_ID |
+ RSSI_SNR_TRIGGER_0_EVENT_ID |
+ PERIODIC_SCAN_COMPLETE_EVENT_ID |
+ PERIODIC_SCAN_REPORT_EVENT_ID |
+ DUMMY_PACKET_EVENT_ID |
+ PEER_REMOVE_COMPLETE_EVENT_ID |
+ BA_SESSION_RX_CONSTRAINT_EVENT_ID |
+ REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
+ INACTIVE_STA_EVENT_ID |
+ MAX_TX_FAILURE_EVENT_ID |
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID |
+ DFS_CHANNELS_CONFIG_COMPLETE_EVENT;
+
ret = wlcore_boot_run_firmware(wl);
if (ret < 0)
goto out;
@@ -964,7 +1026,7 @@ static int wl18xx_hw_init(struct wl1271 *wl)
/* (re)init private structures. Relevant on recovery as well. */
priv->last_fw_rls_idx = 0;
- priv->extra_spare_vif_count = 0;
+ priv->extra_spare_key_count = 0;
/* set the default amount of spare blocks in the bitmap */
ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE);
@@ -1022,7 +1084,12 @@ static bool wl18xx_is_mimo_supported(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
- return priv->conf.phy.number_of_assembled_ant2_4 >= 2;
+ /* only support MIMO with multiple antennas, and when SISO
+ * is not forced through config
+ */
+ return (priv->conf.phy.number_of_assembled_ant2_4 >= 2) &&
+ (priv->conf.ht.mode != HT_MODE_WIDE) &&
+ (priv->conf.ht.mode != HT_MODE_SISO20);
}
/*
@@ -1223,8 +1290,8 @@ static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem)
{
struct wl18xx_priv *priv = wl->priv;
- /* If we have VIFs requiring extra spare, indulge them */
- if (priv->extra_spare_vif_count)
+ /* If we have keys requiring extra spare, indulge them */
+ if (priv->extra_spare_key_count)
return WL18XX_TX_HW_EXTRA_BLOCK_SPARE;
return WL18XX_TX_HW_BLOCK_SPARE;
@@ -1236,42 +1303,48 @@ static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
struct ieee80211_key_conf *key_conf)
{
struct wl18xx_priv *priv = wl->priv;
- bool change_spare = false;
+ bool change_spare = false, special_enc;
int ret;
+ wl1271_debug(DEBUG_CRYPT, "extra spare keys before: %d",
+ priv->extra_spare_key_count);
+
+ special_enc = key_conf->cipher == WL1271_CIPHER_SUITE_GEM ||
+ key_conf->cipher == WLAN_CIPHER_SUITE_TKIP;
+
+ ret = wlcore_set_key(wl, cmd, vif, sta, key_conf);
+ if (ret < 0)
+ goto out;
+
/*
- * when adding the first or removing the last GEM/TKIP interface,
+ * when adding the first or removing the last GEM/TKIP key,
* we have to adjust the number of spare blocks.
*/
- change_spare = (key_conf->cipher == WL1271_CIPHER_SUITE_GEM ||
- key_conf->cipher == WLAN_CIPHER_SUITE_TKIP) &&
- ((priv->extra_spare_vif_count == 0 && cmd == SET_KEY) ||
- (priv->extra_spare_vif_count == 1 && cmd == DISABLE_KEY));
+ if (special_enc) {
+ if (cmd == SET_KEY) {
+ /* first key */
+ change_spare = (priv->extra_spare_key_count == 0);
+ priv->extra_spare_key_count++;
+ } else if (cmd == DISABLE_KEY) {
+ /* last key */
+ change_spare = (priv->extra_spare_key_count == 1);
+ priv->extra_spare_key_count--;
+ }
+ }
- /* no need to change spare - just regular set_key */
- if (!change_spare)
- return wlcore_set_key(wl, cmd, vif, sta, key_conf);
+ wl1271_debug(DEBUG_CRYPT, "extra spare keys after: %d",
+ priv->extra_spare_key_count);
- ret = wlcore_set_key(wl, cmd, vif, sta, key_conf);
- if (ret < 0)
+ if (!change_spare)
goto out;
/* key is now set, change the spare blocks */
- if (cmd == SET_KEY) {
+ if (priv->extra_spare_key_count)
ret = wl18xx_set_host_cfg_bitmap(wl,
WL18XX_TX_HW_EXTRA_BLOCK_SPARE);
- if (ret < 0)
- goto out;
-
- priv->extra_spare_vif_count++;
- } else {
+ else
ret = wl18xx_set_host_cfg_bitmap(wl,
WL18XX_TX_HW_BLOCK_SPARE);
- if (ret < 0)
- goto out;
-
- priv->extra_spare_vif_count--;
- }
out:
return ret;
@@ -1296,6 +1369,92 @@ static u32 wl18xx_pre_pkt_send(struct wl1271 *wl,
return buf_offset;
}
+static void wl18xx_sta_rc_update(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif,
+ struct ieee80211_sta *sta,
+ u32 changed)
+{
+ bool wide = sta->bandwidth >= IEEE80211_STA_RX_BW_40;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide);
+
+ if (!(changed & IEEE80211_RC_BW_CHANGED))
+ return;
+
+ mutex_lock(&wl->mutex);
+
+ /* sanity */
+ if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS))
+ goto out;
+
+ /* ignore the change before association */
+ if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
+ goto out;
+
+ /*
+ * If we started out as wide, we can change the operation mode. If we
+ * thought this was a 20mhz AP, we have to reconnect
+ */
+ if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS ||
+ wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS)
+ wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide);
+ else
+ ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif));
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl18xx_set_peer_cap(struct wl1271 *wl,
+ struct ieee80211_sta_ht_cap *ht_cap,
+ bool allow_ht_operation,
+ u32 rate_set, u8 hlid)
+{
+ return wl18xx_acx_set_peer_cap(wl, ht_cap, allow_ht_operation,
+ rate_set, hlid);
+}
+
+static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid,
+ struct wl1271_link *lnk)
+{
+ u8 thold;
+ struct wl18xx_fw_status_priv *status_priv =
+ (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+ u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
+
+ /* suspended links are never high priority */
+ if (test_bit(hlid, (unsigned long *)&suspend_bitmap))
+ return false;
+
+ /* the priority thresholds are taken from FW */
+ if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map) &&
+ !test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map))
+ thold = status_priv->tx_fast_link_prio_threshold;
+ else
+ thold = status_priv->tx_slow_link_prio_threshold;
+
+ return lnk->allocated_pkts < thold;
+}
+
+static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid,
+ struct wl1271_link *lnk)
+{
+ u8 thold;
+ struct wl18xx_fw_status_priv *status_priv =
+ (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+ u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
+
+ if (test_bit(hlid, (unsigned long *)&suspend_bitmap))
+ thold = status_priv->tx_suspend_threshold;
+ else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map) &&
+ !test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map))
+ thold = status_priv->tx_fast_stop_threshold;
+ else
+ thold = status_priv->tx_slow_stop_threshold;
+
+ return lnk->allocated_pkts < thold;
+}
+
static int wl18xx_setup(struct wl1271 *wl);
static struct wlcore_ops wl18xx_ops = {
@@ -1305,6 +1464,8 @@ static struct wlcore_ops wl18xx_ops = {
.plt_init = wl18xx_plt_init,
.trigger_cmd = wl18xx_trigger_cmd,
.ack_event = wl18xx_ack_event,
+ .wait_for_event = wl18xx_wait_for_event,
+ .process_mailbox_events = wl18xx_process_mailbox_events,
.calc_tx_blocks = wl18xx_calc_tx_blocks,
.set_tx_desc_blocks = wl18xx_set_tx_desc_blocks,
.set_tx_desc_data_len = wl18xx_set_tx_desc_data_len,
@@ -1320,16 +1481,26 @@ static struct wlcore_ops wl18xx_ops = {
.ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask,
.get_mac = wl18xx_get_mac,
.debugfs_init = wl18xx_debugfs_add_files,
+ .scan_start = wl18xx_scan_start,
+ .scan_stop = wl18xx_scan_stop,
+ .sched_scan_start = wl18xx_sched_scan_start,
+ .sched_scan_stop = wl18xx_scan_sched_scan_stop,
.handle_static_data = wl18xx_handle_static_data,
.get_spare_blocks = wl18xx_get_spare_blocks,
.set_key = wl18xx_set_key,
+ .channel_switch = wl18xx_cmd_channel_switch,
.pre_pkt_send = wl18xx_pre_pkt_send,
+ .sta_rc_update = wl18xx_sta_rc_update,
+ .set_peer_cap = wl18xx_set_peer_cap,
+ .lnk_high_prio = wl18xx_lnk_high_prio,
+ .lnk_low_prio = wl18xx_lnk_low_prio,
};
/* HT cap appropriate for wide channels in 2Ghz */
static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = {
.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
- IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40,
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40 |
+ IEEE80211_HT_CAP_GRN_FLD,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
@@ -1343,7 +1514,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = {
/* HT cap appropriate for wide channels in 5Ghz */
static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = {
.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
- IEEE80211_HT_CAP_SUP_WIDTH_20_40,
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_GRN_FLD,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
@@ -1356,7 +1528,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = {
/* HT cap appropriate for SISO 20 */
static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = {
- .cap = IEEE80211_HT_CAP_SGI_20,
+ .cap = IEEE80211_HT_CAP_SGI_20 |
+ IEEE80211_HT_CAP_GRN_FLD,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
@@ -1369,7 +1542,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = {
/* HT cap appropriate for MIMO rates in 20mhz channel */
static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = {
- .cap = IEEE80211_HT_CAP_SGI_20,
+ .cap = IEEE80211_HT_CAP_SGI_20 |
+ IEEE80211_HT_CAP_GRN_FLD,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
@@ -1387,7 +1561,8 @@ static int wl18xx_setup(struct wl1271 *wl)
wl->rtable = wl18xx_rtable;
wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
- wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS;
+ wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
+ wl->num_channels = 2;
wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
@@ -1506,7 +1681,8 @@ static int wl18xx_probe(struct platform_device *pdev)
int ret;
hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv),
- WL18XX_AGGR_BUFFER_SIZE);
+ WL18XX_AGGR_BUFFER_SIZE,
+ sizeof(struct wl18xx_event_mailbox));
if (IS_ERR(hw)) {
wl1271_error("can't allocate hw");
ret = PTR_ERR(hw);
diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c
new file mode 100644
index 00000000000..09d944505ac
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/scan.c
@@ -0,0 +1,326 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2012 Texas Instruments. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/ieee80211.h>
+#include "scan.h"
+#include "../wlcore/debug.h"
+
+static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd,
+ struct wlcore_scan_channels *cmd_channels)
+{
+ memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive));
+ memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active));
+ cmd->dfs = cmd_channels->dfs;
+ cmd->passive_active = cmd_channels->passive_active;
+
+ memcpy(cmd->channels_2, cmd_channels->channels_2,
+ sizeof(cmd->channels_2));
+ memcpy(cmd->channels_5, cmd_channels->channels_5,
+ sizeof(cmd->channels_2));
+ /* channels_4 are not supported, so no need to copy them */
+}
+
+static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ struct cfg80211_scan_request *req)
+{
+ struct wl18xx_cmd_scan_params *cmd;
+ struct wlcore_scan_channels *cmd_channels = NULL;
+ int ret;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->role_id = wlvif->role_id;
+
+ if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ cmd->scan_type = SCAN_TYPE_SEARCH;
+ cmd->rssi_threshold = -127;
+ cmd->snr_threshold = 0;
+
+ cmd->bss_type = SCAN_BSS_TYPE_ANY;
+
+ cmd->ssid_from_list = 0;
+ cmd->filter = 0;
+ cmd->add_broadcast = 0;
+
+ cmd->urgency = 0;
+ cmd->protect = 0;
+
+ cmd->n_probe_reqs = wl->conf.scan.num_probe_reqs;
+ cmd->terminate_after = 0;
+
+ /* configure channels */
+ WARN_ON(req->n_ssids > 1);
+
+ cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL);
+ if (!cmd_channels) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wlcore_set_scan_chan_params(wl, cmd_channels, req->channels,
+ req->n_channels, req->n_ssids,
+ SCAN_TYPE_SEARCH);
+ wl18xx_adjust_channels(cmd, cmd_channels);
+
+ /*
+ * all the cycles params (except total cycles) should
+ * remain 0 for normal scan
+ */
+ cmd->total_cycles = 1;
+
+ if (req->no_cck)
+ cmd->rate = WL18XX_SCAN_RATE_6;
+
+ cmd->tag = WL1271_SCAN_DEFAULT_TAG;
+
+ if (req->n_ssids) {
+ cmd->ssid_len = req->ssids[0].ssid_len;
+ memcpy(cmd->ssid, req->ssids[0].ssid, cmd->ssid_len);
+ }
+
+ /* TODO: per-band ies? */
+ if (cmd->active[0]) {
+ u8 band = IEEE80211_BAND_2GHZ;
+ ret = wl12xx_cmd_build_probe_req(wl, wlvif,
+ cmd->role_id, band,
+ req->ssids ? req->ssids[0].ssid : NULL,
+ req->ssids ? req->ssids[0].ssid_len : 0,
+ req->ie,
+ req->ie_len,
+ false);
+ if (ret < 0) {
+ wl1271_error("2.4GHz PROBE request template failed");
+ goto out;
+ }
+ }
+
+ if (cmd->active[1] || cmd->dfs) {
+ u8 band = IEEE80211_BAND_5GHZ;
+ ret = wl12xx_cmd_build_probe_req(wl, wlvif,
+ cmd->role_id, band,
+ req->ssids ? req->ssids[0].ssid : NULL,
+ req->ssids ? req->ssids[0].ssid_len : 0,
+ req->ie,
+ req->ie_len,
+ false);
+ if (ret < 0) {
+ wl1271_error("5GHz PROBE request template failed");
+ goto out;
+ }
+ }
+
+ wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd));
+
+ ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0);
+ if (ret < 0) {
+ wl1271_error("SCAN failed");
+ goto out;
+ }
+
+out:
+ kfree(cmd_channels);
+ kfree(cmd);
+ return ret;
+}
+
+void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+ wl->scan.failed = false;
+ cancel_delayed_work(&wl->scan_complete_work);
+ ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
+ msecs_to_jiffies(0));
+}
+
+static
+int wl18xx_scan_sched_scan_config(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies)
+{
+ struct wl18xx_cmd_scan_params *cmd;
+ struct wlcore_scan_channels *cmd_channels = NULL;
+ struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
+ int ret;
+ int filter_type;
+
+ wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
+
+ filter_type = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req);
+ if (filter_type < 0)
+ return filter_type;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->role_id = wlvif->role_id;
+
+ if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ cmd->scan_type = SCAN_TYPE_PERIODIC;
+ cmd->rssi_threshold = c->rssi_threshold;
+ cmd->snr_threshold = c->snr_threshold;
+
+ /* don't filter on BSS type */
+ cmd->bss_type = SCAN_BSS_TYPE_ANY;
+
+ cmd->ssid_from_list = 1;
+ if (filter_type == SCAN_SSID_FILTER_LIST)
+ cmd->filter = 1;
+ cmd->add_broadcast = 0;
+
+ cmd->urgency = 0;
+ cmd->protect = 0;
+
+ cmd->n_probe_reqs = c->num_probe_reqs;
+ /* don't stop scanning automatically when something is found */
+ cmd->terminate_after = 0;
+
+ cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL);
+ if (!cmd_channels) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* configure channels */
+ wlcore_set_scan_chan_params(wl, cmd_channels, req->channels,
+ req->n_channels, req->n_ssids,
+ SCAN_TYPE_PERIODIC);
+ wl18xx_adjust_channels(cmd, cmd_channels);
+
+ cmd->short_cycles_sec = 0;
+ cmd->long_cycles_sec = cpu_to_le16(req->interval);
+ cmd->short_cycles_count = 0;
+
+ cmd->total_cycles = 0;
+
+ cmd->tag = WL1271_SCAN_DEFAULT_TAG;
+
+ /* create a PERIODIC_SCAN_REPORT_EVENT whenever we've got a match */
+ cmd->report_threshold = 1;
+ cmd->terminate_on_report = 0;
+
+ if (cmd->active[0]) {
+ u8 band = IEEE80211_BAND_2GHZ;
+ ret = wl12xx_cmd_build_probe_req(wl, wlvif,
+ cmd->role_id, band,
+ req->ssids ? req->ssids[0].ssid : NULL,
+ req->ssids ? req->ssids[0].ssid_len : 0,
+ ies->ie[band],
+ ies->len[band],
+ true);
+ if (ret < 0) {
+ wl1271_error("2.4GHz PROBE request template failed");
+ goto out;
+ }
+ }
+
+ if (cmd->active[1] || cmd->dfs) {
+ u8 band = IEEE80211_BAND_5GHZ;
+ ret = wl12xx_cmd_build_probe_req(wl, wlvif,
+ cmd->role_id, band,
+ req->ssids ? req->ssids[0].ssid : NULL,
+ req->ssids ? req->ssids[0].ssid_len : 0,
+ ies->ie[band],
+ ies->len[band],
+ true);
+ if (ret < 0) {
+ wl1271_error("5GHz PROBE request template failed");
+ goto out;
+ }
+ }
+
+ wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd));
+
+ ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0);
+ if (ret < 0) {
+ wl1271_error("SCAN failed");
+ goto out;
+ }
+
+out:
+ kfree(cmd_channels);
+ kfree(cmd);
+ return ret;
+}
+
+int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies)
+{
+ return wl18xx_scan_sched_scan_config(wl, wlvif, req, ies);
+}
+
+static int __wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ u8 scan_type)
+{
+ struct wl18xx_cmd_scan_stop *stop;
+ int ret;
+
+ wl1271_debug(DEBUG_CMD, "cmd periodic scan stop");
+
+ stop = kzalloc(sizeof(*stop), GFP_KERNEL);
+ if (!stop) {
+ wl1271_error("failed to alloc memory to send sched scan stop");
+ return -ENOMEM;
+ }
+
+ stop->role_id = wlvif->role_id;
+ stop->scan_type = scan_type;
+
+ ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, stop, sizeof(*stop), 0);
+ if (ret < 0) {
+ wl1271_error("failed to send sched scan stop command");
+ goto out_free;
+ }
+
+out_free:
+ kfree(stop);
+ return ret;
+}
+
+void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+ __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_PERIODIC);
+}
+int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ struct cfg80211_scan_request *req)
+{
+ return wl18xx_scan_send(wl, wlvif, req);
+}
+
+int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+ return __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_SEARCH);
+}
diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h
new file mode 100644
index 00000000000..eadee42689d
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/scan.h
@@ -0,0 +1,127 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2012 Texas Instruments. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_SCAN_H__
+#define __WL18XX_SCAN_H__
+
+#include "../wlcore/wlcore.h"
+#include "../wlcore/cmd.h"
+#include "../wlcore/scan.h"
+
+struct tracking_ch_params {
+ struct conn_scan_ch_params channel;
+
+ __le32 bssid_lsb;
+ __le16 bssid_msb;
+
+ u8 padding[2];
+} __packed;
+
+/* probe request rate */
+enum
+{
+ WL18XX_SCAN_RATE_1 = 0,
+ WL18XX_SCAN_RATE_5_5 = 1,
+ WL18XX_SCAN_RATE_6 = 2,
+};
+
+#define WL18XX_MAX_CHANNELS_5GHZ 32
+
+struct wl18xx_cmd_scan_params {
+ struct wl1271_cmd_header header;
+
+ u8 role_id;
+ u8 scan_type;
+
+ s8 rssi_threshold; /* for filtering (in dBm) */
+ s8 snr_threshold; /* for filtering (in dB) */
+
+ u8 bss_type; /* for filtering */
+ u8 ssid_from_list; /* use ssid from configured ssid list */
+ u8 filter; /* forward only results with matching ssids */
+
+ /*
+ * add broadcast ssid in addition to the configured ssids.
+ * the driver should add dummy entry for it (?).
+ */
+ u8 add_broadcast;
+
+ u8 urgency;
+ u8 protect; /* ??? */
+ u8 n_probe_reqs; /* Number of probes requests per channel */
+ u8 terminate_after; /* early terminate scan operation */
+
+ u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */
+ u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */
+ u8 dfs; /* number of dfs channels in 5ghz */
+ u8 passive_active; /* number of passive before active channels 2.4ghz */
+
+ __le16 short_cycles_sec;
+ __le16 long_cycles_sec;
+ u8 short_cycles_count;
+ u8 total_cycles; /* 0 - infinite */
+ u8 padding[2];
+
+ union {
+ struct {
+ struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ];
+ struct conn_scan_ch_params channels_5[WL18XX_MAX_CHANNELS_5GHZ];
+ struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ];
+ };
+ struct tracking_ch_params channels_tracking[WL1271_SCAN_MAX_CHANNELS];
+ } ;
+
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */
+ u8 tag;
+ u8 rate;
+
+ /* send SCAN_REPORT_EVENT in periodic scans after each cycle
+ * if number of results >= report_threshold. Must be 0 for
+ * non periodic scans
+ */
+ u8 report_threshold;
+
+ /* Should periodic scan stop after a report event was created.
+ * Must be 0 for non periodic scans.
+ */
+ u8 terminate_on_report;
+
+ u8 padding1[3];
+} __packed;
+
+struct wl18xx_cmd_scan_stop {
+ struct wl1271_cmd_header header;
+
+ u8 role_id;
+ u8 scan_type;
+ u8 padding[2];
+} __packed;
+
+int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ struct cfg80211_scan_request *req);
+int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ struct cfg80211_sched_scan_request *req,
+ struct ieee80211_sched_scan_ies *ies);
+void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+#endif
diff --git a/drivers/net/wireless/ti/wl18xx/tx.c b/drivers/net/wireless/ti/wl18xx/tx.c
index 5b1fb10d9fd..57c69439664 100644
--- a/drivers/net/wireless/ti/wl18xx/tx.c
+++ b/drivers/net/wireless/ti/wl18xx/tx.c
@@ -28,6 +28,49 @@
#include "wl18xx.h"
#include "tx.h"
+static
+void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif,
+ struct ieee80211_tx_rate *rate)
+{
+ u8 fw_rate = wl->fw_status_2->counters.tx_last_rate;
+
+ if (fw_rate > CONF_HW_RATE_INDEX_MAX) {
+ wl1271_error("last Tx rate invalid: %d", fw_rate);
+ rate->idx = 0;
+ rate->flags = 0;
+ return;
+ }
+
+ if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) {
+ rate->idx = fw_rate;
+ rate->flags = 0;
+ } else {
+ rate->flags = IEEE80211_TX_RC_MCS;
+ rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0;
+
+ /* SGI modifier is counted as a separate rate */
+ if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI)
+ (rate->idx)--;
+ if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI)
+ (rate->idx)--;
+
+ /* this also covers the 40Mhz SGI case (= MCS15) */
+ if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI ||
+ fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI)
+ rate->flags |= IEEE80211_TX_RC_SHORT_GI;
+
+ if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) {
+ struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
+ if (wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
+ wlvif->channel_type == NL80211_CHAN_HT40PLUS) {
+ /* adjustment needed for range 0-7 */
+ rate->idx -= 8;
+ rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ }
+ }
+ }
+}
+
static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
{
struct ieee80211_tx_info *info;
@@ -44,7 +87,6 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
/* a zero bit indicates Tx success */
tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX));
-
skb = wl->tx_frames[id];
info = IEEE80211_SKB_CB(skb);
@@ -56,11 +98,13 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
/* update the TX status info */
if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK))
info->flags |= IEEE80211_TX_STAT_ACK;
+ /*
+ * first pass info->control.vif while it's valid, and then fill out
+ * the info->status structures
+ */
+ wl18xx_get_last_tx_rate(wl, info->control.vif, &info->status.rates[0]);
- /* no real data about Tx completion */
- info->status.rates[0].idx = -1;
- info->status.rates[0].count = 0;
- info->status.rates[0].flags = 0;
+ info->status.rates[0].count = 1; /* no data about retries */
info->status.ack_signal = -1;
if (!tx_success)
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index 96a1e438d67..b6739e79efc 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -26,10 +26,10 @@
/* minimum FW required for driver */
#define WL18XX_CHIP_VER 8
-#define WL18XX_IFTYPE_VER 2
-#define WL18XX_MAJOR_VER 0
-#define WL18XX_SUBTYPE_VER 0
-#define WL18XX_MINOR_VER 100
+#define WL18XX_IFTYPE_VER 5
+#define WL18XX_MAJOR_VER WLCORE_FW_VER_IGNORE
+#define WL18XX_SUBTYPE_VER WLCORE_FW_VER_IGNORE
+#define WL18XX_MINOR_VER 28
#define WL18XX_CMD_MAX_SIZE 740
@@ -49,8 +49,8 @@ struct wl18xx_priv {
/* Index of last released Tx desc in FW */
u8 last_fw_rls_idx;
- /* number of VIFs requiring extra spare mem-blocks */
- int extra_spare_vif_count;
+ /* number of keys requiring extra spare mem-blocks */
+ int extra_spare_key_count;
};
#define WL18XX_FW_MAX_TX_STATUS_DESC 33
@@ -68,7 +68,43 @@ struct wl18xx_fw_status_priv {
*/
u8 released_tx_desc[WL18XX_FW_MAX_TX_STATUS_DESC];
- u8 padding[2];
+ /* A bitmap representing the currently suspended links. The suspend
+ * is short lived, for multi-channel Tx requirements.
+ */
+ __le32 link_suspend_bitmap;
+
+ /* packet threshold for an "almost empty" AC,
+ * for Tx schedulng purposes
+ */
+ u8 tx_ac_threshold;
+
+ /* number of packets to queue up for a link in PS */
+ u8 tx_ps_threshold;
+
+ /* number of packet to queue up for a suspended link */
+ u8 tx_suspend_threshold;
+
+ /* Should have less than this number of packets in queue of a slow
+ * link to qualify as high priority link
+ */
+ u8 tx_slow_link_prio_threshold;
+
+ /* Should have less than this number of packets in queue of a fast
+ * link to qualify as high priority link
+ */
+ u8 tx_fast_link_prio_threshold;
+
+ /* Should have less than this number of packets in queue of a slow
+ * link before we stop queuing up packets for it.
+ */
+ u8 tx_slow_stop_threshold;
+
+ /* Should have less than this number of packets in queue of a fast
+ * link before we stop queuing up packets for it.
+ */
+ u8 tx_fast_stop_threshold;
+
+ u8 padding[3];
};
#define WL18XX_PHY_VERSION_MAX_LEN 20
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 17:06:07 +0000