diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/boot.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/boot.h | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h index 17229b86fc7..e8f8255bbab 100644 --- a/drivers/net/wireless/wl12xx/boot.h +++ b/drivers/net/wireless/wl12xx/boot.h @@ -74,4 +74,56 @@ struct wl1271_static_data { #define FREF_CLK_POLARITY_BITS 0xfffff8ff #define CLK_REQ_OUTN_SEL 0x700 +/* PLL configuration algorithm for wl128x */ +#define SYS_CLK_CFG_REG 0x2200 +/* Bit[0] - 0-TCXO, 1-FREF */ +#define MCS_PLL_CLK_SEL_FREF BIT(0) +/* Bit[3:2] - 01-TCXO, 10-FREF */ +#define WL_CLK_REQ_TYPE_FREF BIT(3) +#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2)) +/* Bit[4] - 0-TCXO, 1-FREF */ +#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4) + +#define TCXO_ILOAD_INT_REG 0x2264 +#define TCXO_CLK_DETECT_REG 0x2266 + +#define TCXO_DET_FAILED BIT(4) + +#define FREF_ILOAD_INT_REG 0x2084 +#define FREF_CLK_DETECT_REG 0x2086 +#define FREF_CLK_DETECT_FAIL BIT(4) + +/* Use this reg for masking during driver access */ +#define WL_SPARE_REG 0x2320 +#define WL_SPARE_VAL BIT(2) +/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */ +#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3)) + +#define PLL_LOCK_COUNTERS_REG 0xD8C +#define PLL_LOCK_COUNTERS_COEX 0x0F +#define PLL_LOCK_COUNTERS_MCS 0xF0 +#define MCS_PLL_OVERRIDE_REG 0xD90 +#define MCS_PLL_CONFIG_REG 0xD92 +#define MCS_SEL_IN_FREQ_MASK 0x0070 +#define MCS_SEL_IN_FREQ_SHIFT 4 +#define MCS_PLL_CONFIG_REG_VAL 0x73 +#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1)) + +#define MCS_PLL_M_REG 0xD94 +#define MCS_PLL_N_REG 0xD96 +#define MCS_PLL_M_REG_VAL 0xC8 +#define MCS_PLL_N_REG_VAL 0x07 + +#define SDIO_IO_DS 0xd14 + +/* SDIO/wSPI DS configuration values */ +enum { + HCI_IO_DS_8MA = 0, + HCI_IO_DS_4MA = 1, /* default */ + HCI_IO_DS_6MA = 2, + HCI_IO_DS_2MA = 3, +}; + +/* end PLL configuration algorithm for wl128x */ + #endif |