diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/cmd.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/cmd.h | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h new file mode 100644 index 00000000000..aa307dcd081 --- /dev/null +++ b/drivers/net/wireless/wl12xx/cmd.h @@ -0,0 +1,265 @@ +/* + * This file is part of wl12xx + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo <kalle.valo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_CMD_H__ +#define __WL12XX_CMD_H__ + +#include "wl12xx.h" + +int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len); +int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer); +int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len, + void *answer); +int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len); +int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity, + void *bitmap, u16 bitmap_len, u8 bitmap_control); +int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable); +int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval, + u16 beacon_interval, u8 wait); +int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode); +int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer); +int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id, + void *buf, size_t buf_len); + +/* unit ms */ +#define WL12XX_COMMAND_TIMEOUT 2000 + +#define WL12XX_MAX_TEMPLATE_SIZE 300 + +struct wl12xx_cmd_packet_template { + __le16 size; + u8 template[WL12XX_MAX_TEMPLATE_SIZE]; +} __attribute__ ((packed)); + +enum wl12xx_commands { + CMD_RESET = 0, + CMD_INTERROGATE = 1, /*use this to read information elements*/ + CMD_CONFIGURE = 2, /*use this to write information elements*/ + CMD_ENABLE_RX = 3, + CMD_ENABLE_TX = 4, + CMD_DISABLE_RX = 5, + CMD_DISABLE_TX = 6, + CMD_SCAN = 8, + CMD_STOP_SCAN = 9, + CMD_VBM = 10, + CMD_START_JOIN = 11, + CMD_SET_KEYS = 12, + CMD_READ_MEMORY = 13, + CMD_WRITE_MEMORY = 14, + CMD_BEACON = 19, + CMD_PROBE_RESP = 20, + CMD_NULL_DATA = 21, + CMD_PROBE_REQ = 22, + CMD_TEST = 23, + CMD_RADIO_CALIBRATE = 25, /* OBSOLETE */ + CMD_ENABLE_RX_PATH = 27, /* OBSOLETE */ + CMD_NOISE_HIST = 28, + CMD_RX_RESET = 29, + CMD_PS_POLL = 30, + CMD_QOS_NULL_DATA = 31, + CMD_LNA_CONTROL = 32, + CMD_SET_BCN_MODE = 33, + CMD_MEASUREMENT = 34, + CMD_STOP_MEASUREMENT = 35, + CMD_DISCONNECT = 36, + CMD_SET_PS_MODE = 37, + CMD_CHANNEL_SWITCH = 38, + CMD_STOP_CHANNEL_SWICTH = 39, + CMD_AP_DISCOVERY = 40, + CMD_STOP_AP_DISCOVERY = 41, + CMD_SPS_SCAN = 42, + CMD_STOP_SPS_SCAN = 43, + CMD_HEALTH_CHECK = 45, + CMD_DEBUG = 46, + CMD_TRIGGER_SCAN_TO = 47, + + NUM_COMMANDS, + MAX_COMMAND_ID = 0xFFFF, +}; + +#define MAX_CMD_PARAMS 572 + +struct wl12xx_command { + u16 id; + u16 status; + u8 parameters[MAX_CMD_PARAMS]; +}; + +enum { + CMD_MAILBOX_IDLE = 0, + CMD_STATUS_SUCCESS = 1, + CMD_STATUS_UNKNOWN_CMD = 2, + CMD_STATUS_UNKNOWN_IE = 3, + CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11, + CMD_STATUS_RX_BUSY = 13, + CMD_STATUS_INVALID_PARAM = 14, + CMD_STATUS_TEMPLATE_TOO_LARGE = 15, + CMD_STATUS_OUT_OF_MEMORY = 16, + CMD_STATUS_STA_TABLE_FULL = 17, + CMD_STATUS_RADIO_ERROR = 18, + CMD_STATUS_WRONG_NESTING = 19, + CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/ + CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/ + MAX_COMMAND_STATUS = 0xff +}; + + +/* + * CMD_READ_MEMORY + * + * The host issues this command to read the WiLink device memory/registers. + * + * Note: The Base Band address has special handling (16 bits registers and + * addresses). For more information, see the hardware specification. + */ +/* + * CMD_WRITE_MEMORY + * + * The host issues this command to write the WiLink device memory/registers. + * + * The Base Band address has special handling (16 bits registers and + * addresses). For more information, see the hardware specification. + */ +#define MAX_READ_SIZE 256 + +struct cmd_read_write_memory { + /* The address of the memory to read from or write to.*/ + u32 addr; + + /* The amount of data in bytes to read from or write to the WiLink + * device.*/ + u32 size; + + /* The actual value read from or written to the Wilink. The source + of this field is the Host in WRITE command or the Wilink in READ + command. */ + u8 value[MAX_READ_SIZE]; +}; + +#define CMDMBOX_HEADER_LEN 4 +#define CMDMBOX_INFO_ELEM_HEADER_LEN 4 + + +struct basic_scan_parameters { + u32 rx_config_options; + u32 rx_filter_options; + + /* + * Scan options: + * bit 0: When this bit is set, passive scan. + * bit 1: Band, when this bit is set we scan + * in the 5Ghz band. + * bit 2: voice mode, 0 for normal scan. + * bit 3: scan priority, 1 for high priority. + */ + u16 scan_options; + + /* Number of channels to scan */ + u8 num_channels; + + /* Number opf probe requests to send, per channel */ + u8 num_probe_requests; + + /* Rate and modulation for probe requests */ + u16 tx_rate; + + u8 tid_trigger; + u8 ssid_len; + u32 ssid[8]; + +} __attribute__ ((packed)); + +struct basic_scan_channel_parameters { + u32 min_duration; /* in TU */ + u32 max_duration; /* in TU */ + u32 bssid_lsb; + u16 bssid_msb; + + /* + * bits 0-3: Early termination count. + * bits 4-5: Early termination condition. + */ + u8 early_termination; + + u8 tx_power_att; + u8 channel; + u8 pad[3]; +} __attribute__ ((packed)); + +/* SCAN parameters */ +#define SCAN_MAX_NUM_OF_CHANNELS 16 + +struct cmd_scan { + struct basic_scan_parameters params; + struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS]; +} __attribute__ ((packed)); + +enum { + BSS_TYPE_IBSS = 0, + BSS_TYPE_STA_BSS = 2, + BSS_TYPE_AP_BSS = 3, + MAX_BSS_TYPE = 0xFF +}; + +#define JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */ +#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE 0x01 /* Early wakeup time */ + + +struct cmd_join { + u32 bssid_lsb; + u16 bssid_msb; + u16 beacon_interval; /* in TBTTs */ + u32 rx_config_options; + u32 rx_filter_options; + + /* + * The target uses this field to determine the rate at + * which to transmit control frame responses (such as + * ACK or CTS frames). + */ + u16 basic_rate_set; + u8 dtim_interval; + u8 tx_ctrl_frame_rate; /* OBSOLETE */ + u8 tx_ctrl_frame_mod; /* OBSOLETE */ + /* + * bits 0-2: This bitwise field specifies the type + * of BSS to start or join (BSS_TYPE_*). + * bit 4: Band - The radio band in which to join + * or start. + * 0 - 2.4GHz band + * 1 - 5GHz band + * bits 3, 5-7: Reserved + */ + u8 bss_type; + u8 channel; + u8 ssid_len; + u8 ssid[IW_ESSID_MAX_SIZE]; + u8 ctrl; /* JOIN_CMD_CTRL_* */ + u8 tx_mgt_frame_rate; /* OBSOLETE */ + u8 tx_mgt_frame_mod; /* OBSOLETE */ + u8 reserved; +} __attribute__ ((packed)); + + +#endif /* __WL12XX_CMD_H__ */ |