diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_conf.h | 1105 |
1 files changed, 0 insertions, 1105 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h deleted file mode 100644 index 5f78a6cb143..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho <luciano.coelho@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_CONF_H__ -#define __WL1271_CONF_H__ - -enum { - CONF_HW_BIT_RATE_1MBPS = BIT(0), - CONF_HW_BIT_RATE_2MBPS = BIT(1), - CONF_HW_BIT_RATE_5_5MBPS = BIT(2), - CONF_HW_BIT_RATE_6MBPS = BIT(3), - CONF_HW_BIT_RATE_9MBPS = BIT(4), - CONF_HW_BIT_RATE_11MBPS = BIT(5), - CONF_HW_BIT_RATE_12MBPS = BIT(6), - CONF_HW_BIT_RATE_18MBPS = BIT(7), - CONF_HW_BIT_RATE_22MBPS = BIT(8), - CONF_HW_BIT_RATE_24MBPS = BIT(9), - CONF_HW_BIT_RATE_36MBPS = BIT(10), - CONF_HW_BIT_RATE_48MBPS = BIT(11), - CONF_HW_BIT_RATE_54MBPS = BIT(12), - CONF_HW_BIT_RATE_MCS_0 = BIT(13), - CONF_HW_BIT_RATE_MCS_1 = BIT(14), - CONF_HW_BIT_RATE_MCS_2 = BIT(15), - CONF_HW_BIT_RATE_MCS_3 = BIT(16), - CONF_HW_BIT_RATE_MCS_4 = BIT(17), - CONF_HW_BIT_RATE_MCS_5 = BIT(18), - CONF_HW_BIT_RATE_MCS_6 = BIT(19), - CONF_HW_BIT_RATE_MCS_7 = BIT(20) -}; - -enum { - CONF_HW_RATE_INDEX_1MBPS = 0, - CONF_HW_RATE_INDEX_2MBPS = 1, - CONF_HW_RATE_INDEX_5_5MBPS = 2, - CONF_HW_RATE_INDEX_6MBPS = 3, - CONF_HW_RATE_INDEX_9MBPS = 4, - CONF_HW_RATE_INDEX_11MBPS = 5, - CONF_HW_RATE_INDEX_12MBPS = 6, - CONF_HW_RATE_INDEX_18MBPS = 7, - CONF_HW_RATE_INDEX_22MBPS = 8, - CONF_HW_RATE_INDEX_24MBPS = 9, - CONF_HW_RATE_INDEX_36MBPS = 10, - CONF_HW_RATE_INDEX_48MBPS = 11, - CONF_HW_RATE_INDEX_54MBPS = 12, - CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, -}; - -enum { - CONF_HW_RXTX_RATE_MCS7 = 0, - CONF_HW_RXTX_RATE_MCS6, - CONF_HW_RXTX_RATE_MCS5, - CONF_HW_RXTX_RATE_MCS4, - CONF_HW_RXTX_RATE_MCS3, - CONF_HW_RXTX_RATE_MCS2, - CONF_HW_RXTX_RATE_MCS1, - CONF_HW_RXTX_RATE_MCS0, - CONF_HW_RXTX_RATE_54, - CONF_HW_RXTX_RATE_48, - CONF_HW_RXTX_RATE_36, - CONF_HW_RXTX_RATE_24, - CONF_HW_RXTX_RATE_22, - CONF_HW_RXTX_RATE_18, - CONF_HW_RXTX_RATE_12, - CONF_HW_RXTX_RATE_11, - CONF_HW_RXTX_RATE_9, - CONF_HW_RXTX_RATE_6, - CONF_HW_RXTX_RATE_5_5, - CONF_HW_RXTX_RATE_2, - CONF_HW_RXTX_RATE_1, - CONF_HW_RXTX_RATE_MAX, - CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff -}; - -enum { - CONF_SG_DISABLE = 0, - CONF_SG_PROTECTIVE, - CONF_SG_OPPORTUNISTIC -}; - -enum { - /* - * PER threshold in PPM of the BT voice - * - * Range: 0 - 10000000 - */ - CONF_SG_BT_PER_THRESHOLD = 0, - - /* - * Number of consequent RX_ACTIVE activities to override BT voice - * frames to ensure WLAN connection - * - * Range: 0 - 100 - */ - CONF_SG_HV3_MAX_OVERRIDE, - - /* - * Defines the PER threshold of the BT voice - * - * Range: 0 - 65000 - */ - CONF_SG_BT_NFS_SAMPLE_INTERVAL, - - /* - * Defines the load ratio of BT - * - * Range: 0 - 100 (%) - */ - CONF_SG_BT_LOAD_RATIO, - - /* - * Defines whether the SG will force WLAN host to enter/exit PSM - * - * Range: 1 - SG can force, 0 - host handles PSM - */ - CONF_SG_AUTO_PS_MODE, - - /* - * Compensation percentage of probe requests when scan initiated - * during BT voice/ACL link. - * - * Range: 0 - 255 (%) - */ - CONF_SG_AUTO_SCAN_PROBE_REQ, - - /* - * Compensation percentage of probe requests when active scan initiated - * during BT voice - * - * Range: 0 - 255 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, - - /* - * Defines antenna configuration (single/dual antenna) - * - * Range: 0 - single antenna, 1 - dual antenna - */ - CONF_SG_ANTENNA_CONFIGURATION, - - /* - * The threshold (percent) of max consequtive beacon misses before - * increasing priority of beacon reception. - * - * Range: 0 - 100 (%) - */ - CONF_SG_BEACON_MISS_PERCENT, - - /* - * The rate threshold below which receiving a data frame from the AP - * will increase the priority of the data frame above BT traffic. - * - * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 - */ - CONF_SG_RATE_ADAPT_THRESH, - - /* - * Not used currently. - * - * Range: 0 - */ - CONF_SG_RATE_ADAPT_SNR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT master basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, - CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT master basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT slave basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT slave basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, - CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, - - /* - * RX guard time before the beginning of a new BT voice frame during - * which no new WLAN trigger frame is transmitted. - * - * Range: 0 - 100000 (us) - */ - CONF_SG_RXT, - - /* - * TX guard time before the beginning of a new BT voice frame during - * which no new WLAN frame is transmitted. - * - * Range: 0 - 100000 (us) - */ - - CONF_SG_TXT, - - /* - * Enable adaptive RXT/TXT algorithm. If disabled, the host values - * will be utilized. - * - * Range: 0 - disable, 1 - enable - */ - CONF_SG_ADAPTIVE_RXT_TXT, - - /* - * The used WLAN legacy service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_PS_POLL_TIMEOUT, - - /* - * The used WLAN UPSD service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_UPSD_TIMEOUT, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, - CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, - CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, - CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT voice - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, - - /* - * Fixed time ensured for BT traffic to gain the antenna during WLAN - * passive scan. - * - * Range: 0 - 1000 ms - */ - CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, - - /* - * Fixed time ensured for WLAN traffic to gain the antenna during WLAN - * passive scan. - * - * Range: 0 - 1000 ms - */ - CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, - - /* - * Number of consequent BT voice frames not interrupted by WLAN - * - * Range: 0 - 100 - */ - CONF_SG_HV3_MAX_SERVED, - - /* - * Protection time of the DHCP procedure. - * - * Range: 0 - 100000 (ms) - */ - CONF_SG_DHCP_TIME, - - /* - * Compensation percentage of WLAN active scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, - CONF_SG_TEMP_PARAM_1, - CONF_SG_TEMP_PARAM_2, - CONF_SG_TEMP_PARAM_3, - CONF_SG_TEMP_PARAM_4, - CONF_SG_TEMP_PARAM_5, - CONF_SG_PARAMS_MAX, - CONF_SG_PARAMS_ALL = 0xff -}; - -struct conf_sg_settings { - u32 params[CONF_SG_PARAMS_MAX]; - u8 state; -}; - -enum conf_rx_queue_type { - CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ - CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ -}; - -struct conf_rx_settings { - /* - * The maximum amount of time, in TU, before the - * firmware discards the MSDU. - * - * Range: 0 - 0xFFFFFFFF - */ - u32 rx_msdu_life_time; - - /* - * Packet detection threshold in the PHY. - * - * FIXME: details unknown. - */ - u32 packet_detection_threshold; - - /* - * The longest time the STA will wait to receive traffic from the AP - * after a PS-poll has been transmitted. - * - * Range: 0 - 200000 - */ - u16 ps_poll_timeout; - /* - * The longest time the STA will wait to receive traffic from the AP - * after a frame has been sent from an UPSD enabled queue. - * - * Range: 0 - 200000 - */ - u16 upsd_timeout; - - /* - * The number of octets in an MPDU, below which an RTS/CTS - * handshake is not performed. - * - * Range: 0 - 4096 - */ - u16 rts_threshold; - - /* - * The RX Clear Channel Assessment threshold in the PHY - * (the energy threshold). - * - * Range: ENABLE_ENERGY_D == 0x140A - * DISABLE_ENERGY_D == 0xFFEF - */ - u16 rx_cca_threshold; - - /* - * Occupied Rx mem-blocks number which requires interrupting the host - * (0 = no buffering, 0xffff = disabled). - * - * Range: u16 - */ - u16 irq_blk_threshold; - - /* - * Rx packets number which requires interrupting the host - * (0 = no buffering). - * - * Range: u16 - */ - u16 irq_pkt_threshold; - - /* - * Max time in msec the FW may delay RX-Complete interrupt. - * - * Range: 1 - 100 - */ - u16 irq_timeout; - - /* - * The RX queue type. - * - * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, - */ - u8 queue_type; -}; - -#define CONF_TX_MAX_RATE_CLASSES 8 - -#define CONF_TX_RATE_MASK_UNSPECIFIED 0 -#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ - CONF_HW_BIT_RATE_2MBPS) -#define CONF_TX_RATE_RETRY_LIMIT 10 - -struct conf_tx_rate_class { - - /* - * The rates enabled for this rate class. - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 enabled_rates; - - /* - * The dot11 short retry limit used for TX retries. - * - * Range: u8 - */ - u8 short_retry_limit; - - /* - * The dot11 long retry limit used for TX retries. - * - * Range: u8 - */ - u8 long_retry_limit; - - /* - * Flags controlling the attributes of TX transmission. - * - * Range: bit 0: Truncate - when set, FW attempts to send a frame stop - * when the total valid per-rate attempts have - * been exhausted; otherwise transmissions - * will continue at the lowest available rate - * until the appropriate one of the - * short_retry_limit, long_retry_limit, - * dot11_max_transmit_msdu_life_time, or - * max_tx_life_time, is exhausted. - * 1: Preamble Override - indicates if the preamble type - * should be used in TX. - * 2: Preamble Type - the type of the preamble to be used by - * the policy (0 - long preamble, 1 - short preamble. - */ - u8 aflags; -}; - -#define CONF_TX_MAX_AC_COUNT 4 - -/* Slot number setting to start transmission at PIFS interval */ -#define CONF_TX_AIFS_PIFS 1 -/* Slot number setting to start transmission at DIFS interval normal - * DCF access */ -#define CONF_TX_AIFS_DIFS 2 - - -enum conf_tx_ac { - CONF_TX_AC_BE = 0, /* best effort / legacy */ - CONF_TX_AC_BK = 1, /* background */ - CONF_TX_AC_VI = 2, /* video */ - CONF_TX_AC_VO = 3, /* voice */ - CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ - CONF_TX_AC_ANY_TID = 0x1f -}; - -struct conf_tx_ac_category { - /* - * The AC class identifier. - * - * Range: enum conf_tx_ac - */ - u8 ac; - - /* - * The contention window minimum size (in slots) for the access - * class. - * - * Range: u8 - */ - u8 cw_min; - - /* - * The contention window maximum size (in slots) for the access - * class. - * - * Range: u8 - */ - u16 cw_max; - - /* - * The AIF value (in slots) for the access class. - * - * Range: u8 - */ - u8 aifsn; - - /* - * The TX Op Limit (in microseconds) for the access class. - * - * Range: u16 - */ - u16 tx_op_limit; -}; - -#define CONF_TX_MAX_TID_COUNT 8 - -enum { - CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ - CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ - CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ -}; - -enum { - CONF_PS_SCHEME_LEGACY = 0, - CONF_PS_SCHEME_UPSD_TRIGGER = 1, - CONF_PS_SCHEME_LEGACY_PSPOLL = 2, - CONF_PS_SCHEME_SAPSD = 3, -}; - -enum { - CONF_ACK_POLICY_LEGACY = 0, - CONF_ACK_POLICY_NO_ACK = 1, - CONF_ACK_POLICY_BLOCK = 2, -}; - - -struct conf_tx_tid { - u8 queue_id; - u8 channel_type; - u8 tsid; - u8 ps_scheme; - u8 ack_policy; - u32 apsd_conf[2]; -}; - -struct conf_tx_settings { - /* - * The TX ED value for TELEC Enable/Disable. - * - * Range: 0, 1 - */ - u8 tx_energy_detection; - - /* - * Configuration for rate classes for TX (currently only one - * rate class supported.) - */ - struct conf_tx_rate_class rc_conf; - - /* - * Configuration for access categories for TX rate control. - */ - u8 ac_conf_count; - struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; - - /* - * Configuration for TID parameters. - */ - u8 tid_conf_count; - struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; - - /* - * The TX fragmentation threshold. - * - * Range: u16 - */ - u16 frag_threshold; - - /* - * Max time in msec the FW may delay frame TX-Complete interrupt. - * - * Range: u16 - */ - u16 tx_compl_timeout; - - /* - * Completed TX packet count which requires to issue the TX-Complete - * interrupt. - * - * Range: u16 - */ - u16 tx_compl_threshold; - - /* - * The rate used for control messages and scanning on the 2.4GHz band - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 basic_rate; - - /* - * The rate used for control messages and scanning on the 5GHz band - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 basic_rate_5; -}; - -enum { - CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ - CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ - CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ - CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ - CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F -}; - -#define CONF_MAX_BCN_FILT_IE_COUNT 32 - -#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) -#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) - -#define CONF_BCN_IE_OUI_LEN 3 -#define CONF_BCN_IE_VER_LEN 2 - -struct conf_bcn_filt_rule { - /* - * IE number to which to associate a rule. - * - * Range: u8 - */ - u8 ie; - - /* - * Rule to associate with the specific ie. - * - * Range: CONF_BCN_RULE_PASS_ON_* - */ - u8 rule; - - /* - * OUI for the vendor specifie IE (221) - */ - u8 oui[CONF_BCN_IE_OUI_LEN]; - - /* - * Type for the vendor specifie IE (221) - */ - u8 type; - - /* - * Version for the vendor specifie IE (221) - */ - u8 version[CONF_BCN_IE_VER_LEN]; -}; - -#define CONF_MAX_RSSI_SNR_TRIGGERS 8 - -enum { - CONF_TRIG_METRIC_RSSI_BEACON = 0, - CONF_TRIG_METRIC_RSSI_DATA, - CONF_TRIG_METRIC_SNR_BEACON, - CONF_TRIG_METRIC_SNR_DATA -}; - -enum { - CONF_TRIG_EVENT_TYPE_LEVEL = 0, - CONF_TRIG_EVENT_TYPE_EDGE -}; - -enum { - CONF_TRIG_EVENT_DIR_LOW = 0, - CONF_TRIG_EVENT_DIR_HIGH, - CONF_TRIG_EVENT_DIR_BIDIR -}; - -struct conf_sig_weights { - - /* - * RSSI from beacons average weight. - * - * Range: u8 - */ - u8 rssi_bcn_avg_weight; - - /* - * RSSI from data average weight. - * - * Range: u8 - */ - u8 rssi_pkt_avg_weight; - - /* - * SNR from beacons average weight. - * - * Range: u8 - */ - u8 snr_bcn_avg_weight; - - /* - * SNR from data average weight. - * - * Range: u8 - */ - u8 snr_pkt_avg_weight; -}; - -enum conf_bcn_filt_mode { - CONF_BCN_FILT_MODE_DISABLED = 0, - CONF_BCN_FILT_MODE_ENABLED = 1 -}; - -enum conf_bet_mode { - CONF_BET_MODE_DISABLE = 0, - CONF_BET_MODE_ENABLE = 1, -}; - -struct conf_conn_settings { - /* - * Firmware wakeup conditions configuration. The host may set only - * one bit. - * - * Range: CONF_WAKE_UP_EVENT_* - */ - u8 wake_up_event; - - /* - * Listen interval for beacons or Dtims. - * - * Range: 0 for beacon and Dtim wakeup - * 1-10 for x Dtims - * 1-255 for x beacons - */ - u8 listen_interval; - - /* - * Enable or disable the beacon filtering. - * - * Range: CONF_BCN_FILT_MODE_* - */ - enum conf_bcn_filt_mode bcn_filt_mode; - - /* - * Configure Beacon filter pass-thru rules. - */ - u8 bcn_filt_ie_count; - struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; - - /* - * The number of consequtive beacons to lose, before the firmware - * becomes out of synch. - * - * Range: u32 - */ - u32 synch_fail_thold; - - /* - * After out-of-synch, the number of TU's to wait without a further - * received beacon (or probe response) before issuing the BSS_EVENT_LOSE - * event. - * - * Range: u32 - */ - u32 bss_lose_timeout; - - /* - * Beacon receive timeout. - * - * Range: u32 - */ - u32 beacon_rx_timeout; - - /* - * Broadcast receive timeout. - * - * Range: u32 - */ - u32 broadcast_timeout; - - /* - * Enable/disable reception of broadcast packets in power save mode - * - * Range: 1 - enable, 0 - disable - */ - u8 rx_broadcast_in_ps; - - /* - * Consequtive PS Poll failures before sending event to driver - * - * Range: u8 - */ - u8 ps_poll_threshold; - - /* - * PS Poll failure recovery ACTIVE period length - * - * Range: u32 (ms) - */ - u32 ps_poll_recovery_period; - - /* - * Configuration of signal average weights. - */ - struct conf_sig_weights sig_weights; - - /* - * Specifies if beacon early termination procedure is enabled or - * disabled. - * - * Range: CONF_BET_MODE_* - */ - u8 bet_enable; - - /* - * Specifies the maximum number of consecutive beacons that may be - * early terminated. After this number is reached at least one full - * beacon must be correctly received in FW before beacon ET - * resumes. - * - * Range 0 - 255 - */ - u8 bet_max_consecutive; - - /* - * Specifies the maximum number of times to try PSM entry if it fails - * (if sending the appropriate null-func message fails.) - * - * Range 0 - 255 - */ - u8 psm_entry_retries; - - /* - * Specifies the maximum number of times to try transmit the PSM entry - * null-func frame for each PSM entry attempt - * - * Range 0 - 255 - */ - u8 psm_entry_nullfunc_retries; - - /* - * Specifies the time to linger in active mode after successfully - * transmitting the PSM entry null-func frame. - * - * Range 0 - 255 TU's - */ - u8 psm_entry_hangover_period; - - /* - * - * Specifies the interval of the connection keep-alive null-func - * frame in ms. - * - * Range: 1000 - 3600000 - */ - u32 keep_alive_interval; - - /* - * Maximum listen interval supported by the driver in units of beacons. - * - * Range: u16 - */ - u8 max_listen_interval; -}; - -enum { - CONF_REF_CLK_19_2_E, - CONF_REF_CLK_26_E, - CONF_REF_CLK_38_4_E, - CONF_REF_CLK_52_E -}; - -enum single_dual_band_enum { - CONF_SINGLE_BAND, - CONF_DUAL_BAND -}; - -#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 -#define CONF_NUMBER_OF_SUB_BANDS_5 7 -#define CONF_NUMBER_OF_RATE_GROUPS 6 -#define CONF_NUMBER_OF_CHANNELS_2_4 14 -#define CONF_NUMBER_OF_CHANNELS_5 35 - -struct conf_radio_parms { - /* - * FEM parameter set to use - * - * Range: 0 or 1 - */ - u8 fem; -}; - -struct conf_itrim_settings { - /* enable dco itrim */ - u8 enable; - - /* moderation timeout in microsecs from the last TX */ - u32 timeout; -}; - -struct conf_pm_config_settings { - /* - * Host clock settling time - * - * Range: 0 - 30000 us - */ - u32 host_clk_settling_time; - - /* - * Host fast wakeup support - * - * Range: true, false - */ - bool host_fast_wakeup_support; -}; - -struct conf_roam_trigger_settings { - /* - * The minimum interval between two trigger events. - * - * Range: 0 - 60000 ms - */ - u16 trigger_pacing; - - /* - * The weight for rssi/beacon average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_rssi_beacon; - - /* - * The weight for rssi/data frame average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_rssi_data; - - /* - * The weight for snr/beacon average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_snr_beacon; - - /* - * The weight for snr/data frame average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_snr_data; -}; - -struct conf_scan_settings { - /* - * The minimum time to wait on each channel for active scans - * - * Range: 0 - 65536 tu - */ - u16 min_dwell_time_active; - - /* - * The maximum time to wait on each channel for active scans - * - * Range: 0 - 65536 tu - */ - u16 max_dwell_time_active; - - /* - * The maximum time to wait on each channel for passive scans - * - * Range: 0 - 65536 tu - */ - u16 min_dwell_time_passive; - - /* - * The maximum time to wait on each channel for passive scans - * - * Range: 0 - 65536 tu - */ - u16 max_dwell_time_passive; - - /* - * Number of probe requests to transmit on each active scan channel - * - * Range: u8 - */ - u16 num_probe_reqs; - -}; - -/* these are number of channels on the band divided by two, rounded up */ -#define CONF_TX_PWR_COMPENSATION_LEN_2 7 -#define CONF_TX_PWR_COMPENSATION_LEN_5 18 - -struct conf_rf_settings { - /* - * Per channel power compensation for 2.4GHz - * - * Range: s8 - */ - u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; - - /* - * Per channel power compensation for 5GHz - * - * Range: s8 - */ - u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; -}; - -struct conf_drv_settings { - struct conf_sg_settings sg; - struct conf_rx_settings rx; - struct conf_tx_settings tx; - struct conf_conn_settings conn; - struct conf_itrim_settings itrim; - struct conf_pm_config_settings pm_config; - struct conf_roam_trigger_settings roam_trigger; - struct conf_scan_settings scan; - struct conf_rf_settings rf; -}; - -#endif |