diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_conf.h | 488 |
1 files changed, 362 insertions, 126 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 6f9e75cc564..d046d044b5b 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -65,110 +65,344 @@ enum { CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, }; -struct conf_sg_settings { +enum { + CONF_HW_RXTX_RATE_MCS7 = 0, + CONF_HW_RXTX_RATE_MCS6, + CONF_HW_RXTX_RATE_MCS5, + CONF_HW_RXTX_RATE_MCS4, + CONF_HW_RXTX_RATE_MCS3, + CONF_HW_RXTX_RATE_MCS2, + CONF_HW_RXTX_RATE_MCS1, + CONF_HW_RXTX_RATE_MCS0, + CONF_HW_RXTX_RATE_54, + CONF_HW_RXTX_RATE_48, + CONF_HW_RXTX_RATE_36, + CONF_HW_RXTX_RATE_24, + CONF_HW_RXTX_RATE_22, + CONF_HW_RXTX_RATE_18, + CONF_HW_RXTX_RATE_12, + CONF_HW_RXTX_RATE_11, + CONF_HW_RXTX_RATE_9, + CONF_HW_RXTX_RATE_6, + CONF_HW_RXTX_RATE_5_5, + CONF_HW_RXTX_RATE_2, + CONF_HW_RXTX_RATE_1, + CONF_HW_RXTX_RATE_MAX, + CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff +}; + +enum { + CONF_SG_DISABLE = 0, + CONF_SG_PROTECTIVE, + CONF_SG_OPPORTUNISTIC +}; + +enum { /* - * Defines the PER threshold in PPM of the BT voice of which reaching - * this value will trigger raising the priority of the BT voice by - * the BT IP until next NFS sample interval time as defined in - * nfs_sample_interval. + * PER threshold in PPM of the BT voice * - * Unit: PER value in PPM (parts per million) - * #Error_packets / #Total_packets + * Range: 0 - 10000000 + */ + CONF_SG_BT_PER_THRESHOLD = 0, - * Range: u32 + /* + * Number of consequent RX_ACTIVE activities to override BT voice + * frames to ensure WLAN connection + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_OVERRIDE, + + /* + * Defines the PER threshold of the BT voice + * + * Range: 0 - 65000 + */ + CONF_SG_BT_NFS_SAMPLE_INTERVAL, + + /* + * Defines the load ratio of BT + * + * Range: 0 - 100 (%) + */ + CONF_SG_BT_LOAD_RATIO, + + /* + * Defines whether the SG will force WLAN host to enter/exit PSM + * + * Range: 1 - SG can force, 0 - host handles PSM + */ + CONF_SG_AUTO_PS_MODE, + + /* + * Compensation percentage of probe requests when scan initiated + * during BT voice/ACL link. + * + * Range: 0 - 255 (%) + */ + CONF_SG_AUTO_SCAN_PROBE_REQ, + + /* + * Compensation percentage of probe requests when active scan initiated + * during BT voice + * + * Range: 0 - 255 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Defines antenna configuration (single/dual antenna) + * + * Range: 0 - single antenna, 1 - dual antenna + */ + CONF_SG_ANTENNA_CONFIGURATION, + + /* + * The threshold (percent) of max consequtive beacon misses before + * increasing priority of beacon reception. + * + * Range: 0 - 100 (%) + */ + CONF_SG_BEACON_MISS_PERCENT, + + /* + * The rate threshold below which receiving a data frame from the AP + * will increase the priority of the data frame above BT traffic. + * + * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 + */ + CONF_SG_RATE_ADAPT_THRESH, + + /* + * Not used currently. + * + * Range: 0 + */ + CONF_SG_RATE_ADAPT_SNR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, + + /* + * RX guard time before the beginning of a new BT voice frame during + * which no new WLAN trigger frame is transmitted. + * + * Range: 0 - 100000 (us) + */ + CONF_SG_RXT, + + /* + * TX guard time before the beginning of a new BT voice frame during + * which no new WLAN frame is transmitted. + * + * Range: 0 - 100000 (us) + */ + + CONF_SG_TXT, + + /* + * Enable adaptive RXT/TXT algorithm. If disabled, the host values + * will be utilized. + * + * Range: 0 - disable, 1 - enable + */ + CONF_SG_ADAPTIVE_RXT_TXT, + + /* + * The used WLAN legacy service period during active BT ACL link + * + * Range: 0 - 255 (ms) + */ + CONF_SG_PS_POLL_TIMEOUT, + + /* + * The used WLAN UPSD service period during active BT ACL link + * + * Range: 0 - 255 (ms) */ - u32 per_threshold; + CONF_SG_UPSD_TIMEOUT, /* - * This value is an absolute time in micro-seconds to limit the - * maximum scan duration compensation while in SG + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT master EDR + * + * Range: 0 - 255 (ms) */ - u32 max_scan_compensation_time; + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, - /* Defines the PER threshold of the BT voice of which reaching this - * value will trigger raising the priority of the BT voice until next - * NFS sample interval time as defined in sample_interval. + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT master EDR * - * Unit: msec - * Range: 1-65000 + * Range: 0 - 255 (ms) */ - u16 nfs_sample_interval; + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, /* - * Defines the load ratio for the BT. - * The WLAN ratio is: 100 - load_ratio + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT slave EDR * - * Unit: Percent - * Range: 0-100 + * Range: 0 - 255 (ms) */ - u8 load_ratio; + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, /* - * true - Co-ex is allowed to enter/exit P.S automatically and - * transparently to the host + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT slave EDR * - * false - Co-ex is disallowed to enter/exit P.S and will trigger an - * event to the host to notify for the need to enter/exit P.S - * due to BT change state + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT basic rate * + * Range: 0 - 255 (ms) */ - u8 auto_ps_mode; + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, /* - * This parameter defines the compensation percentage of num of probe - * requests in case scan is initiated during BT voice/BT ACL - * guaranteed link. + * Compensation percentage of WLAN passive scan window if initiated + * during BT voice * - * Unit: Percent - * Range: 0-255 (0 - No compensation) + * Range: 0 - 1000 (%) */ - u8 probe_req_compensation; + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, /* - * This parameter defines the compensation percentage of scan window - * size in case scan is initiated during BT voice/BT ACL Guaranteed - * link. + * Compensation percentage of WLAN passive scan window if initiated + * during BT A2DP * - * Unit: Percent - * Range: 0-255 (0 - No compensation) + * Range: 0 - 1000 (%) */ - u8 scan_window_compensation; + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, /* - * Defines the antenna configuration. + * Fixed time ensured for BT traffic to gain the antenna during WLAN + * passive scan. * - * Range: 0 - Single Antenna; 1 - Dual Antenna + * Range: 0 - 1000 ms */ - u8 antenna_config; + CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, /* - * The percent out of the Max consecutive beacon miss roaming trigger - * which is the threshold for raising the priority of beacon - * reception. + * Fixed time ensured for WLAN traffic to gain the antenna during WLAN + * passive scan. * - * Range: 1-100 - * N = MaxConsecutiveBeaconMiss - * P = coexMaxConsecutiveBeaconMissPrecent - * Threshold = MIN( N-1, round(N * P / 100)) + * Range: 0 - 1000 ms */ - u8 beacon_miss_threshold; + CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, /* - * The RX rate threshold below which rate adaptation is assumed to be - * occurring at the AP which will raise priority for ACTIVE_RX and RX - * SP. + * Number of consequent BT voice frames not interrupted by WLAN * - * Range: HW_BIT_RATE_* + * Range: 0 - 100 */ - u32 rate_adaptation_threshold; + CONF_SG_HV3_MAX_SERVED, /* - * The SNR above which the RX rate threshold indicating AP rate - * adaptation is valid + * Protection time of the DHCP procedure. * - * Range: -128 - 127 + * Range: 0 - 100000 (ms) */ - s8 rate_adaptation_snr; + CONF_SG_DHCP_TIME, + + /* + * Compensation percentage of WLAN active scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, + CONF_SG_TEMP_PARAM_1, + CONF_SG_TEMP_PARAM_2, + CONF_SG_TEMP_PARAM_3, + CONF_SG_TEMP_PARAM_4, + CONF_SG_TEMP_PARAM_5, + CONF_SG_PARAMS_MAX, + CONF_SG_PARAMS_ALL = 0xff +}; + +struct conf_sg_settings { + u32 params[CONF_SG_PARAMS_MAX]; + u8 state; }; enum conf_rx_queue_type { @@ -440,6 +674,19 @@ struct conf_tx_settings { */ u16 tx_compl_threshold; + /* + * The rate used for control messages and scanning on the 2.4GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate; + + /* + * The rate used for control messages and scanning on the 5GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate_5; }; enum { @@ -509,65 +756,6 @@ enum { CONF_TRIG_EVENT_DIR_BIDIR }; - -struct conf_sig_trigger { - /* - * The RSSI / SNR threshold value. - * - * FIXME: what is the range? - */ - s16 threshold; - - /* - * Minimum delay between two trigger events for this trigger in ms. - * - * Range: 0 - 60000 - */ - u16 pacing; - - /* - * The measurement data source for this trigger. - * - * Range: CONF_TRIG_METRIC_* - */ - u8 metric; - - /* - * The trigger type of this trigger. - * - * Range: CONF_TRIG_EVENT_TYPE_* - */ - u8 type; - - /* - * The direction of the trigger. - * - * Range: CONF_TRIG_EVENT_DIR_* - */ - u8 direction; - - /* - * Hysteresis range of the trigger around the threshold (in dB) - * - * Range: u8 - */ - u8 hysteresis; - - /* - * Index of the trigger rule. - * - * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1 - */ - u8 index; - - /* - * Enable / disable this rule (to use for clearing rules.) - * - * Range: 1 - Enabled, 2 - Not enabled - */ - u8 enable; -}; - struct conf_sig_weights { /* @@ -686,12 +874,6 @@ struct conf_conn_settings { u8 ps_poll_threshold; /* - * Configuration of signal (rssi/snr) triggers. - */ - u8 sig_trigger_count; - struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS]; - - /* * Configuration of signal average weights. */ struct conf_sig_weights sig_weights; @@ -721,6 +903,22 @@ struct conf_conn_settings { * Range 0 - 255 */ u8 psm_entry_retries; + + /* + * + * Specifies the interval of the connection keep-alive null-func + * frame in ms. + * + * Range: 1000 - 3600000 + */ + u32 keep_alive_interval; + + /* + * Maximum listen interval supported by the driver in units of beacons. + * + * Range: u16 + */ + u8 max_listen_interval; }; enum { @@ -782,6 +980,43 @@ struct conf_pm_config_settings { bool host_fast_wakeup_support; }; +struct conf_roam_trigger_settings { + /* + * The minimum interval between two trigger events. + * + * Range: 0 - 60000 ms + */ + u16 trigger_pacing; + + /* + * The weight for rssi/beacon average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_rssi_beacon; + + /* + * The weight for rssi/data frame average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_rssi_data; + + /* + * The weight for snr/beacon average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_snr_beacon; + + /* + * The weight for snr/data frame average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_snr_data; +}; + struct conf_drv_settings { struct conf_sg_settings sg; struct conf_rx_settings rx; @@ -790,6 +1025,7 @@ struct conf_drv_settings { struct conf_init_settings init; struct conf_itrim_settings itrim; struct conf_pm_config_settings pm_config; + struct conf_roam_trigger_settings roam_trigger; }; #endif |