summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/zd1211rw/zd_chip.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/zd1211rw/zd_chip.h')
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.h825
1 files changed, 825 insertions, 0 deletions
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
new file mode 100644
index 00000000000..805121093ab
--- /dev/null
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -0,0 +1,825 @@
+/* zd_chip.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ZD_CHIP_H
+#define _ZD_CHIP_H
+
+#include "zd_types.h"
+#include "zd_rf.h"
+#include "zd_usb.h"
+
+/* Header for the Media Access Controller (MAC) and the Baseband Processor
+ * (BBP). It appears that the ZD1211 wraps the old ZD1205 with USB glue and
+ * adds a processor for handling the USB protocol.
+ */
+
+/* 8-bit hardware registers */
+#define CR0 CTL_REG(0x0000)
+#define CR1 CTL_REG(0x0004)
+#define CR2 CTL_REG(0x0008)
+#define CR3 CTL_REG(0x000C)
+
+#define CR5 CTL_REG(0x0010)
+/* bit 5: if set short preamble used
+ * bit 6: filter band - Japan channel 14 on, else off
+ */
+#define CR6 CTL_REG(0x0014)
+#define CR7 CTL_REG(0x0018)
+#define CR8 CTL_REG(0x001C)
+
+#define CR4 CTL_REG(0x0020)
+
+#define CR9 CTL_REG(0x0024)
+/* bit 2: antenna switch (together with CR10) */
+#define CR10 CTL_REG(0x0028)
+/* bit 1: antenna switch (together with CR9)
+ * RF2959 controls with CR11 radion on and off
+ */
+#define CR11 CTL_REG(0x002C)
+/* bit 6: TX power control for OFDM
+ * RF2959 controls with CR10 radio on and off
+ */
+#define CR12 CTL_REG(0x0030)
+#define CR13 CTL_REG(0x0034)
+#define CR14 CTL_REG(0x0038)
+#define CR15 CTL_REG(0x003C)
+#define CR16 CTL_REG(0x0040)
+#define CR17 CTL_REG(0x0044)
+#define CR18 CTL_REG(0x0048)
+#define CR19 CTL_REG(0x004C)
+#define CR20 CTL_REG(0x0050)
+#define CR21 CTL_REG(0x0054)
+#define CR22 CTL_REG(0x0058)
+#define CR23 CTL_REG(0x005C)
+#define CR24 CTL_REG(0x0060) /* CCA threshold */
+#define CR25 CTL_REG(0x0064)
+#define CR26 CTL_REG(0x0068)
+#define CR27 CTL_REG(0x006C)
+#define CR28 CTL_REG(0x0070)
+#define CR29 CTL_REG(0x0074)
+#define CR30 CTL_REG(0x0078)
+#define CR31 CTL_REG(0x007C) /* TX power control for RF in CCK mode */
+#define CR32 CTL_REG(0x0080)
+#define CR33 CTL_REG(0x0084)
+#define CR34 CTL_REG(0x0088)
+#define CR35 CTL_REG(0x008C)
+#define CR36 CTL_REG(0x0090)
+#define CR37 CTL_REG(0x0094)
+#define CR38 CTL_REG(0x0098)
+#define CR39 CTL_REG(0x009C)
+#define CR40 CTL_REG(0x00A0)
+#define CR41 CTL_REG(0x00A4)
+#define CR42 CTL_REG(0x00A8)
+#define CR43 CTL_REG(0x00AC)
+#define CR44 CTL_REG(0x00B0)
+#define CR45 CTL_REG(0x00B4)
+#define CR46 CTL_REG(0x00B8)
+#define CR47 CTL_REG(0x00BC) /* CCK baseband gain
+ * (patch value might be in EEPROM)
+ */
+#define CR48 CTL_REG(0x00C0)
+#define CR49 CTL_REG(0x00C4)
+#define CR50 CTL_REG(0x00C8)
+#define CR51 CTL_REG(0x00CC) /* TX power control for RF in 6-36M modes */
+#define CR52 CTL_REG(0x00D0) /* TX power control for RF in 48M mode */
+#define CR53 CTL_REG(0x00D4) /* TX power control for RF in 54M mode */
+#define CR54 CTL_REG(0x00D8)
+#define CR55 CTL_REG(0x00DC)
+#define CR56 CTL_REG(0x00E0)
+#define CR57 CTL_REG(0x00E4)
+#define CR58 CTL_REG(0x00E8)
+#define CR59 CTL_REG(0x00EC)
+#define CR60 CTL_REG(0x00F0)
+#define CR61 CTL_REG(0x00F4)
+#define CR62 CTL_REG(0x00F8)
+#define CR63 CTL_REG(0x00FC)
+#define CR64 CTL_REG(0x0100)
+#define CR65 CTL_REG(0x0104) /* OFDM 54M calibration */
+#define CR66 CTL_REG(0x0108) /* OFDM 48M calibration */
+#define CR67 CTL_REG(0x010C) /* OFDM 36M calibration */
+#define CR68 CTL_REG(0x0110) /* CCK calibration */
+#define CR69 CTL_REG(0x0114)
+#define CR70 CTL_REG(0x0118)
+#define CR71 CTL_REG(0x011C)
+#define CR72 CTL_REG(0x0120)
+#define CR73 CTL_REG(0x0124)
+#define CR74 CTL_REG(0x0128)
+#define CR75 CTL_REG(0x012C)
+#define CR76 CTL_REG(0x0130)
+#define CR77 CTL_REG(0x0134)
+#define CR78 CTL_REG(0x0138)
+#define CR79 CTL_REG(0x013C)
+#define CR80 CTL_REG(0x0140)
+#define CR81 CTL_REG(0x0144)
+#define CR82 CTL_REG(0x0148)
+#define CR83 CTL_REG(0x014C)
+#define CR84 CTL_REG(0x0150)
+#define CR85 CTL_REG(0x0154)
+#define CR86 CTL_REG(0x0158)
+#define CR87 CTL_REG(0x015C)
+#define CR88 CTL_REG(0x0160)
+#define CR89 CTL_REG(0x0164)
+#define CR90 CTL_REG(0x0168)
+#define CR91 CTL_REG(0x016C)
+#define CR92 CTL_REG(0x0170)
+#define CR93 CTL_REG(0x0174)
+#define CR94 CTL_REG(0x0178)
+#define CR95 CTL_REG(0x017C)
+#define CR96 CTL_REG(0x0180)
+#define CR97 CTL_REG(0x0184)
+#define CR98 CTL_REG(0x0188)
+#define CR99 CTL_REG(0x018C)
+#define CR100 CTL_REG(0x0190)
+#define CR101 CTL_REG(0x0194)
+#define CR102 CTL_REG(0x0198)
+#define CR103 CTL_REG(0x019C)
+#define CR104 CTL_REG(0x01A0)
+#define CR105 CTL_REG(0x01A4)
+#define CR106 CTL_REG(0x01A8)
+#define CR107 CTL_REG(0x01AC)
+#define CR108 CTL_REG(0x01B0)
+#define CR109 CTL_REG(0x01B4)
+#define CR110 CTL_REG(0x01B8)
+#define CR111 CTL_REG(0x01BC)
+#define CR112 CTL_REG(0x01C0)
+#define CR113 CTL_REG(0x01C4)
+#define CR114 CTL_REG(0x01C8)
+#define CR115 CTL_REG(0x01CC)
+#define CR116 CTL_REG(0x01D0)
+#define CR117 CTL_REG(0x01D4)
+#define CR118 CTL_REG(0x01D8)
+#define CR119 CTL_REG(0x01DC)
+#define CR120 CTL_REG(0x01E0)
+#define CR121 CTL_REG(0x01E4)
+#define CR122 CTL_REG(0x01E8)
+#define CR123 CTL_REG(0x01EC)
+#define CR124 CTL_REG(0x01F0)
+#define CR125 CTL_REG(0x01F4)
+#define CR126 CTL_REG(0x01F8)
+#define CR127 CTL_REG(0x01FC)
+#define CR128 CTL_REG(0x0200)
+#define CR129 CTL_REG(0x0204)
+#define CR130 CTL_REG(0x0208)
+#define CR131 CTL_REG(0x020C)
+#define CR132 CTL_REG(0x0210)
+#define CR133 CTL_REG(0x0214)
+#define CR134 CTL_REG(0x0218)
+#define CR135 CTL_REG(0x021C)
+#define CR136 CTL_REG(0x0220)
+#define CR137 CTL_REG(0x0224)
+#define CR138 CTL_REG(0x0228)
+#define CR139 CTL_REG(0x022C)
+#define CR140 CTL_REG(0x0230)
+#define CR141 CTL_REG(0x0234)
+#define CR142 CTL_REG(0x0238)
+#define CR143 CTL_REG(0x023C)
+#define CR144 CTL_REG(0x0240)
+#define CR145 CTL_REG(0x0244)
+#define CR146 CTL_REG(0x0248)
+#define CR147 CTL_REG(0x024C)
+#define CR148 CTL_REG(0x0250)
+#define CR149 CTL_REG(0x0254)
+#define CR150 CTL_REG(0x0258)
+#define CR151 CTL_REG(0x025C)
+#define CR152 CTL_REG(0x0260)
+#define CR153 CTL_REG(0x0264)
+#define CR154 CTL_REG(0x0268)
+#define CR155 CTL_REG(0x026C)
+#define CR156 CTL_REG(0x0270)
+#define CR157 CTL_REG(0x0274)
+#define CR158 CTL_REG(0x0278)
+#define CR159 CTL_REG(0x027C)
+#define CR160 CTL_REG(0x0280)
+#define CR161 CTL_REG(0x0284)
+#define CR162 CTL_REG(0x0288)
+#define CR163 CTL_REG(0x028C)
+#define CR164 CTL_REG(0x0290)
+#define CR165 CTL_REG(0x0294)
+#define CR166 CTL_REG(0x0298)
+#define CR167 CTL_REG(0x029C)
+#define CR168 CTL_REG(0x02A0)
+#define CR169 CTL_REG(0x02A4)
+#define CR170 CTL_REG(0x02A8)
+#define CR171 CTL_REG(0x02AC)
+#define CR172 CTL_REG(0x02B0)
+#define CR173 CTL_REG(0x02B4)
+#define CR174 CTL_REG(0x02B8)
+#define CR175 CTL_REG(0x02BC)
+#define CR176 CTL_REG(0x02C0)
+#define CR177 CTL_REG(0x02C4)
+#define CR178 CTL_REG(0x02C8)
+#define CR179 CTL_REG(0x02CC)
+#define CR180 CTL_REG(0x02D0)
+#define CR181 CTL_REG(0x02D4)
+#define CR182 CTL_REG(0x02D8)
+#define CR183 CTL_REG(0x02DC)
+#define CR184 CTL_REG(0x02E0)
+#define CR185 CTL_REG(0x02E4)
+#define CR186 CTL_REG(0x02E8)
+#define CR187 CTL_REG(0x02EC)
+#define CR188 CTL_REG(0x02F0)
+#define CR189 CTL_REG(0x02F4)
+#define CR190 CTL_REG(0x02F8)
+#define CR191 CTL_REG(0x02FC)
+#define CR192 CTL_REG(0x0300)
+#define CR193 CTL_REG(0x0304)
+#define CR194 CTL_REG(0x0308)
+#define CR195 CTL_REG(0x030C)
+#define CR196 CTL_REG(0x0310)
+#define CR197 CTL_REG(0x0314)
+#define CR198 CTL_REG(0x0318)
+#define CR199 CTL_REG(0x031C)
+#define CR200 CTL_REG(0x0320)
+#define CR201 CTL_REG(0x0324)
+#define CR202 CTL_REG(0x0328)
+#define CR203 CTL_REG(0x032C) /* I2C bus template value & flash control */
+#define CR204 CTL_REG(0x0330)
+#define CR205 CTL_REG(0x0334)
+#define CR206 CTL_REG(0x0338)
+#define CR207 CTL_REG(0x033C)
+#define CR208 CTL_REG(0x0340)
+#define CR209 CTL_REG(0x0344)
+#define CR210 CTL_REG(0x0348)
+#define CR211 CTL_REG(0x034C)
+#define CR212 CTL_REG(0x0350)
+#define CR213 CTL_REG(0x0354)
+#define CR214 CTL_REG(0x0358)
+#define CR215 CTL_REG(0x035C)
+#define CR216 CTL_REG(0x0360)
+#define CR217 CTL_REG(0x0364)
+#define CR218 CTL_REG(0x0368)
+#define CR219 CTL_REG(0x036C)
+#define CR220 CTL_REG(0x0370)
+#define CR221 CTL_REG(0x0374)
+#define CR222 CTL_REG(0x0378)
+#define CR223 CTL_REG(0x037C)
+#define CR224 CTL_REG(0x0380)
+#define CR225 CTL_REG(0x0384)
+#define CR226 CTL_REG(0x0388)
+#define CR227 CTL_REG(0x038C)
+#define CR228 CTL_REG(0x0390)
+#define CR229 CTL_REG(0x0394)
+#define CR230 CTL_REG(0x0398)
+#define CR231 CTL_REG(0x039C)
+#define CR232 CTL_REG(0x03A0)
+#define CR233 CTL_REG(0x03A4)
+#define CR234 CTL_REG(0x03A8)
+#define CR235 CTL_REG(0x03AC)
+#define CR236 CTL_REG(0x03B0)
+
+#define CR240 CTL_REG(0x03C0)
+/* bit 7: host-controlled RF register writes
+ * CR241-CR245: for hardware controlled writing of RF bits, not needed for
+ * USB
+ */
+#define CR241 CTL_REG(0x03C4)
+#define CR242 CTL_REG(0x03C8)
+#define CR243 CTL_REG(0x03CC)
+#define CR244 CTL_REG(0x03D0)
+#define CR245 CTL_REG(0x03D4)
+
+#define CR251 CTL_REG(0x03EC) /* only used for activation and deactivation of
+ * Airoha RFs AL2230 and AL7230B
+ */
+#define CR252 CTL_REG(0x03F0)
+#define CR253 CTL_REG(0x03F4)
+#define CR254 CTL_REG(0x03F8)
+#define CR255 CTL_REG(0x03FC)
+
+#define CR_MAX_PHY_REG 255
+
+/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211
+ * driver.
+ */
+
+#define CR_RF_IF_CLK CTL_REG(0x0400)
+#define CR_RF_IF_DATA CTL_REG(0x0404)
+#define CR_PE1_PE2 CTL_REG(0x0408)
+#define CR_PE2_DLY CTL_REG(0x040C)
+#define CR_LE1 CTL_REG(0x0410)
+#define CR_LE2 CTL_REG(0x0414)
+/* Seems to enable/disable GPI (General Purpose IO?) */
+#define CR_GPI_EN CTL_REG(0x0418)
+#define CR_RADIO_PD CTL_REG(0x042C)
+#define CR_RF2948_PD CTL_REG(0x042C)
+#define CR_ENABLE_PS_MANUAL_AGC CTL_REG(0x043C)
+#define CR_CONFIG_PHILIPS CTL_REG(0x0440)
+#define CR_SA2400_SER_AP CTL_REG(0x0444)
+#define CR_I2C_WRITE CTL_REG(0x0444)
+#define CR_SA2400_SER_RP CTL_REG(0x0448)
+#define CR_RADIO_PE CTL_REG(0x0458)
+#define CR_RST_BUS_MASTER CTL_REG(0x045C)
+#define CR_RFCFG CTL_REG(0x0464)
+#define CR_HSTSCHG CTL_REG(0x046C)
+#define CR_PHY_ON CTL_REG(0x0474)
+#define CR_RX_DELAY CTL_REG(0x0478)
+#define CR_RX_PE_DELAY CTL_REG(0x047C)
+#define CR_GPIO_1 CTL_REG(0x0490)
+#define CR_GPIO_2 CTL_REG(0x0494)
+#define CR_EncryBufMux CTL_REG(0x04A8)
+#define CR_PS_CTRL CTL_REG(0x0500)
+#define CR_ADDA_PWR_DWN CTL_REG(0x0504)
+#define CR_ADDA_MBIAS_WARMTIME CTL_REG(0x0508)
+#define CR_MAC_PS_STATE CTL_REG(0x050C)
+
+#define CR_INTERRUPT CTL_REG(0x0510)
+#define INT_TX_COMPLETE 0x00000001
+#define INT_RX_COMPLETE 0x00000002
+#define INT_RETRY_FAIL 0x00000004
+#define INT_WAKEUP 0x00000008
+#define INT_DTIM_NOTIFY 0x00000020
+#define INT_CFG_NEXT_BCN 0x00000040
+#define INT_BUS_ABORT 0x00000080
+#define INT_TX_FIFO_READY 0x00000100
+#define INT_UART 0x00000200
+#define INT_TX_COMPLETE_EN 0x00010000
+#define INT_RX_COMPLETE_EN 0x00020000
+#define INT_RETRY_FAIL_EN 0x00040000
+#define INT_WAKEUP_EN 0x00080000
+#define INT_DTIM_NOTIFY_EN 0x00200000
+#define INT_CFG_NEXT_BCN_EN 0x00400000
+#define INT_BUS_ABORT_EN 0x00800000
+#define INT_TX_FIFO_READY_EN 0x01000000
+#define INT_UART_EN 0x02000000
+
+#define CR_TSF_LOW_PART CTL_REG(0x0514)
+#define CR_TSF_HIGH_PART CTL_REG(0x0518)
+
+/* Following three values are in time units (1024us)
+ * Following condition must be met:
+ * atim < tbtt < bcn
+ */
+#define CR_ATIM_WND_PERIOD CTL_REG(0x051C)
+#define CR_BCN_INTERVAL CTL_REG(0x0520)
+#define CR_PRE_TBTT CTL_REG(0x0524)
+/* in units of TU(1024us) */
+
+/* for UART support */
+#define CR_UART_RBR_THR_DLL CTL_REG(0x0540)
+#define CR_UART_DLM_IER CTL_REG(0x0544)
+#define CR_UART_IIR_FCR CTL_REG(0x0548)
+#define CR_UART_LCR CTL_REG(0x054c)
+#define CR_UART_MCR CTL_REG(0x0550)
+#define CR_UART_LSR CTL_REG(0x0554)
+#define CR_UART_MSR CTL_REG(0x0558)
+#define CR_UART_ECR CTL_REG(0x055c)
+#define CR_UART_STATUS CTL_REG(0x0560)
+
+#define CR_PCI_TX_ADDR_P1 CTL_REG(0x0600)
+#define CR_PCI_TX_AddR_P2 CTL_REG(0x0604)
+#define CR_PCI_RX_AddR_P1 CTL_REG(0x0608)
+#define CR_PCI_RX_AddR_P2 CTL_REG(0x060C)
+
+/* must be overwritten if custom MAC address will be used */
+#define CR_MAC_ADDR_P1 CTL_REG(0x0610)
+#define CR_MAC_ADDR_P2 CTL_REG(0x0614)
+#define CR_BSSID_P1 CTL_REG(0x0618)
+#define CR_BSSID_P2 CTL_REG(0x061C)
+#define CR_BCN_PLCP_CFG CTL_REG(0x0620)
+#define CR_GROUP_HASH_P1 CTL_REG(0x0624)
+#define CR_GROUP_HASH_P2 CTL_REG(0x0628)
+#define CR_RX_TIMEOUT CTL_REG(0x062C)
+
+/* Basic rates supported by the BSS. When producing ACK or CTS messages, the
+ * device will use a rate in this table that is less than or equal to the rate
+ * of the incoming frame which prompted the response */
+#define CR_BASIC_RATE_TBL CTL_REG(0x0630)
+#define CR_RATE_1M 0x0001 /* 802.11b */
+#define CR_RATE_2M 0x0002 /* 802.11b */
+#define CR_RATE_5_5M 0x0004 /* 802.11b */
+#define CR_RATE_11M 0x0008 /* 802.11b */
+#define CR_RATE_6M 0x0100 /* 802.11g */
+#define CR_RATE_9M 0x0200 /* 802.11g */
+#define CR_RATE_12M 0x0400 /* 802.11g */
+#define CR_RATE_18M 0x0800 /* 802.11g */
+#define CR_RATE_24M 0x1000 /* 802.11g */
+#define CR_RATE_36M 0x2000 /* 802.11g */
+#define CR_RATE_48M 0x4000 /* 802.11g */
+#define CR_RATE_54M 0x8000 /* 802.11g */
+#define CR_RATES_80211G 0xff00
+#define CR_RATES_80211B 0x000f
+
+/* Mandatory rates required in the BSS. When producing ACK or CTS messages, if
+ * the device could not find an appropriate rate in CR_BASIC_RATE_TBL, it will
+ * look for a rate in this table that is less than or equal to the rate of
+ * the incoming frame. */
+#define CR_MANDATORY_RATE_TBL CTL_REG(0x0634)
+#define CR_RTS_CTS_RATE CTL_REG(0x0638)
+
+#define CR_WEP_PROTECT CTL_REG(0x063C)
+#define CR_RX_THRESHOLD CTL_REG(0x0640)
+
+/* register for controlling the LEDS */
+#define CR_LED CTL_REG(0x0644)
+/* masks for controlling LEDs */
+#define LED1 0x0100
+#define LED2 0x0200
+
+/* Seems to indicate that the configuration is over.
+ */
+#define CR_AFTER_PNP CTL_REG(0x0648)
+#define CR_ACK_TIME_80211 CTL_REG(0x0658)
+
+#define CR_RX_OFFSET CTL_REG(0x065c)
+
+#define CR_PHY_DELAY CTL_REG(0x066C)
+#define CR_BCN_FIFO CTL_REG(0x0670)
+#define CR_SNIFFER_ON CTL_REG(0x0674)
+
+#define CR_ENCRYPTION_TYPE CTL_REG(0x0678)
+#define NO_WEP 0
+#define WEP64 1
+#define WEP128 5
+#define WEP256 6
+#define ENC_SNIFFER 8
+
+#define CR_ZD1211_RETRY_MAX CTL_REG(0x067C)
+
+#define CR_REG1 CTL_REG(0x0680)
+/* Setting the bit UNLOCK_PHY_REGS disallows the write access to physical
+ * registers, so one could argue it is a LOCK bit. But calling it
+ * LOCK_PHY_REGS makes it confusing.
+ */
+#define UNLOCK_PHY_REGS 0x0080
+
+#define CR_DEVICE_STATE CTL_REG(0x0684)
+#define CR_UNDERRUN_CNT CTL_REG(0x0688)
+
+#define CR_RX_FILTER CTL_REG(0x068c)
+#define RX_FILTER_ASSOC_RESPONSE 0x0002
+#define RX_FILTER_PROBE_RESPONSE 0x0020
+#define RX_FILTER_BEACON 0x0100
+#define RX_FILTER_AUTH 0x0800
+/* Sniff modus sets filter to 0xfffff */
+
+#define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690)
+#define CR_BCN_FIFO_SEMAPHORE CTL_REG(0x0694)
+#define CR_IFS_VALUE CTL_REG(0x0698)
+#define CR_RX_TIME_OUT CTL_REG(0x069C)
+#define CR_TOTAL_RX_FRM CTL_REG(0x06A0)
+#define CR_CRC32_CNT CTL_REG(0x06A4)
+#define CR_CRC16_CNT CTL_REG(0x06A8)
+#define CR_DECRYPTION_ERR_UNI CTL_REG(0x06AC)
+#define CR_RX_FIFO_OVERRUN CTL_REG(0x06B0)
+
+#define CR_DECRYPTION_ERR_MUL CTL_REG(0x06BC)
+
+#define CR_NAV_CNT CTL_REG(0x06C4)
+#define CR_NAV_CCA CTL_REG(0x06C8)
+#define CR_RETRY_CNT CTL_REG(0x06CC)
+
+#define CR_READ_TCB_ADDR CTL_REG(0x06E8)
+#define CR_READ_RFD_ADDR CTL_REG(0x06EC)
+#define CR_CWMIN_CWMAX CTL_REG(0x06F0)
+#define CR_TOTAL_TX_FRM CTL_REG(0x06F4)
+
+/* CAM: Continuous Access Mode (power management) */
+#define CR_CAM_MODE CTL_REG(0x0700)
+#define CR_CAM_ROLL_TB_LOW CTL_REG(0x0704)
+#define CR_CAM_ROLL_TB_HIGH CTL_REG(0x0708)
+#define CR_CAM_ADDRESS CTL_REG(0x070C)
+#define CR_CAM_DATA CTL_REG(0x0710)
+
+#define CR_ROMDIR CTL_REG(0x0714)
+
+#define CR_DECRY_ERR_FLG_LOW CTL_REG(0x0714)
+#define CR_DECRY_ERR_FLG_HIGH CTL_REG(0x0718)
+
+#define CR_WEPKEY0 CTL_REG(0x0720)
+#define CR_WEPKEY1 CTL_REG(0x0724)
+#define CR_WEPKEY2 CTL_REG(0x0728)
+#define CR_WEPKEY3 CTL_REG(0x072C)
+#define CR_WEPKEY4 CTL_REG(0x0730)
+#define CR_WEPKEY5 CTL_REG(0x0734)
+#define CR_WEPKEY6 CTL_REG(0x0738)
+#define CR_WEPKEY7 CTL_REG(0x073C)
+#define CR_WEPKEY8 CTL_REG(0x0740)
+#define CR_WEPKEY9 CTL_REG(0x0744)
+#define CR_WEPKEY10 CTL_REG(0x0748)
+#define CR_WEPKEY11 CTL_REG(0x074C)
+#define CR_WEPKEY12 CTL_REG(0x0750)
+#define CR_WEPKEY13 CTL_REG(0x0754)
+#define CR_WEPKEY14 CTL_REG(0x0758)
+#define CR_WEPKEY15 CTL_REG(0x075c)
+#define CR_TKIP_MODE CTL_REG(0x0760)
+
+#define CR_EEPROM_PROTECT0 CTL_REG(0x0758)
+#define CR_EEPROM_PROTECT1 CTL_REG(0x075C)
+
+#define CR_DBG_FIFO_RD CTL_REG(0x0800)
+#define CR_DBG_SELECT CTL_REG(0x0804)
+#define CR_FIFO_Length CTL_REG(0x0808)
+
+
+#define CR_RSSI_MGC CTL_REG(0x0810)
+
+#define CR_PON CTL_REG(0x0818)
+#define CR_RX_ON CTL_REG(0x081C)
+#define CR_TX_ON CTL_REG(0x0820)
+#define CR_CHIP_EN CTL_REG(0x0824)
+#define CR_LO_SW CTL_REG(0x0828)
+#define CR_TXRX_SW CTL_REG(0x082C)
+#define CR_S_MD CTL_REG(0x0830)
+
+#define CR_USB_DEBUG_PORT CTL_REG(0x0888)
+
+#define CR_ZD1211B_TX_PWR_CTL1 CTL_REG(0x0b00)
+#define CR_ZD1211B_TX_PWR_CTL2 CTL_REG(0x0b04)
+#define CR_ZD1211B_TX_PWR_CTL3 CTL_REG(0x0b08)
+#define CR_ZD1211B_TX_PWR_CTL4 CTL_REG(0x0b0c)
+#define CR_ZD1211B_AIFS_CTL1 CTL_REG(0x0b10)
+#define CR_ZD1211B_AIFS_CTL2 CTL_REG(0x0b14)
+#define CR_ZD1211B_TXOP CTL_REG(0x0b20)
+#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28)
+
+#define AP_RX_FILTER 0x0400feff
+#define STA_RX_FILTER 0x0000ffff
+
+#define CWIN_SIZE 0x007f043f
+
+
+#define HWINT_ENABLED 0x004f0000
+#define HWINT_DISABLED 0
+
+#define E2P_PWR_INT_GUARD 8
+#define E2P_CHANNEL_COUNT 14
+
+/* If you compare this addresses with the ZYDAS orignal driver, please notify
+ * that we use word mapping for the EEPROM.
+ */
+
+/*
+ * Upper 16 bit contains the regulatory domain.
+ */
+#define E2P_SUBID E2P_REG(0x00)
+#define E2P_POD E2P_REG(0x02)
+#define E2P_MAC_ADDR_P1 E2P_REG(0x04)
+#define E2P_MAC_ADDR_P2 E2P_REG(0x06)
+#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08)
+#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a)
+#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c)
+#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e)
+#define E2P_PWR_INT_VALUE1 E2P_REG(0x10)
+#define E2P_PWR_INT_VALUE2 E2P_REG(0x12)
+#define E2P_PWR_INT_VALUE3 E2P_REG(0x14)
+#define E2P_PWR_INT_VALUE4 E2P_REG(0x16)
+
+/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30)
+ * also only 11 channels. */
+#define E2P_ALLOWED_CHANNEL E2P_REG(0x18)
+
+#define E2P_PHY_REG E2P_REG(0x1a)
+#define E2P_DEVICE_VER E2P_REG(0x20)
+#define E2P_36M_CAL_VALUE1 E2P_REG(0x28)
+#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a)
+#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c)
+#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e)
+#define E2P_11A_INT_VALUE1 E2P_REG(0x30)
+#define E2P_11A_INT_VALUE2 E2P_REG(0x32)
+#define E2P_11A_INT_VALUE3 E2P_REG(0x34)
+#define E2P_11A_INT_VALUE4 E2P_REG(0x36)
+#define E2P_48M_CAL_VALUE1 E2P_REG(0x38)
+#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a)
+#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c)
+#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e)
+#define E2P_48M_INT_VALUE1 E2P_REG(0x40)
+#define E2P_48M_INT_VALUE2 E2P_REG(0x42)
+#define E2P_48M_INT_VALUE3 E2P_REG(0x44)
+#define E2P_48M_INT_VALUE4 E2P_REG(0x46)
+#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */
+#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a)
+#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c)
+#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e)
+#define E2P_54M_INT_VALUE1 E2P_REG(0x50)
+#define E2P_54M_INT_VALUE2 E2P_REG(0x52)
+#define E2P_54M_INT_VALUE3 E2P_REG(0x54)
+#define E2P_54M_INT_VALUE4 E2P_REG(0x56)
+
+/* All 16 bit values */
+#define FW_FIRMWARE_VER FW_REG(0)
+/* non-zero if USB high speed connection */
+#define FW_USB_SPEED FW_REG(1)
+#define FW_FIX_TX_RATE FW_REG(2)
+/* Seems to be able to control LEDs over the firmware */
+#define FW_LINK_STATUS FW_REG(3)
+#define FW_SOFT_RESET FW_REG(4)
+#define FW_FLASH_CHK FW_REG(5)
+
+enum {
+ CR_BASE_OFFSET = 0x9000,
+ FW_START_OFFSET = 0xee00,
+ FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d,
+ EEPROM_START_OFFSET = 0xf800,
+ EEPROM_SIZE = 0x800, /* words */
+ LOAD_CODE_SIZE = 0xe, /* words */
+ LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */
+ EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE,
+ E2P_BASE_OFFSET = EEPROM_START_OFFSET +
+ EEPROM_REGS_OFFSET,
+};
+
+#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d)
+
+enum {
+ /* indices for ofdm_cal_values */
+ OFDM_36M_INDEX = 0,
+ OFDM_48M_INDEX = 1,
+ OFDM_54M_INDEX = 2,
+};
+
+struct zd_chip {
+ struct zd_usb usb;
+ struct zd_rf rf;
+ struct mutex mutex;
+ u8 e2p_mac[ETH_ALEN];
+ /* EepSetPoint in the vendor driver */
+ u8 pwr_cal_values[E2P_CHANNEL_COUNT];
+ /* integration values in the vendor driver */
+ u8 pwr_int_values[E2P_CHANNEL_COUNT];
+ /* SetPointOFDM in the vendor driver */
+ u8 ofdm_cal_values[3][E2P_CHANNEL_COUNT];
+ u8 pa_type:4, patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1,
+ is_zd1211b:1;
+};
+
+static inline struct zd_chip *zd_usb_to_chip(struct zd_usb *usb)
+{
+ return container_of(usb, struct zd_chip, usb);
+}
+
+static inline struct zd_chip *zd_rf_to_chip(struct zd_rf *rf)
+{
+ return container_of(rf, struct zd_chip, rf);
+}
+
+#define zd_chip_dev(chip) (&(chip)->usb.intf->dev)
+
+void zd_chip_init(struct zd_chip *chip,
+ struct net_device *netdev,
+ struct usb_interface *intf);
+void zd_chip_clear(struct zd_chip *chip);
+int zd_chip_init_hw(struct zd_chip *chip, u8 device_type);
+int zd_chip_reset(struct zd_chip *chip);
+
+static inline int zd_ioread16v_locked(struct zd_chip *chip, u16 *values,
+ const zd_addr_t *addresses,
+ unsigned int count)
+{
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ return zd_usb_ioread16v(&chip->usb, values, addresses, count);
+}
+
+static inline int zd_ioread16_locked(struct zd_chip *chip, u16 *value,
+ const zd_addr_t addr)
+{
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ return zd_usb_ioread16(&chip->usb, value, addr);
+}
+
+int zd_ioread32v_locked(struct zd_chip *chip, u32 *values,
+ const zd_addr_t *addresses, unsigned int count);
+
+static inline int zd_ioread32_locked(struct zd_chip *chip, u32 *value,
+ const zd_addr_t addr)
+{
+ return zd_ioread32v_locked(chip, value, (const zd_addr_t *)&addr, 1);
+}
+
+static inline int zd_iowrite16_locked(struct zd_chip *chip, u16 value,
+ zd_addr_t addr)
+{
+ struct zd_ioreq16 ioreq;
+
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ ioreq.addr = addr;
+ ioreq.value = value;
+
+ return zd_usb_iowrite16v(&chip->usb, &ioreq, 1);
+}
+
+int zd_iowrite16a_locked(struct zd_chip *chip,
+ const struct zd_ioreq16 *ioreqs, unsigned int count);
+
+int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
+ unsigned int count);
+
+static inline int zd_iowrite32_locked(struct zd_chip *chip, u32 value,
+ zd_addr_t addr)
+{
+ struct zd_ioreq32 ioreq;
+
+ ioreq.addr = addr;
+ ioreq.value = value;
+
+ return _zd_iowrite32v_locked(chip, &ioreq, 1);
+}
+
+int zd_iowrite32a_locked(struct zd_chip *chip,
+ const struct zd_ioreq32 *ioreqs, unsigned int count);
+
+static inline int zd_rfwrite_locked(struct zd_chip *chip, u32 value, u8 bits)
+{
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ return zd_usb_rfwrite(&chip->usb, value, bits);
+}
+
+int zd_rfwritev_locked(struct zd_chip *chip,
+ const u32* values, unsigned int count, u8 bits);
+
+/* Locking functions for reading and writing registers.
+ * The different parameters are intentional.
+ */
+int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value);
+int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value);
+int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value);
+int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value);
+int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses,
+ u32 *values, unsigned int count);
+int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
+ unsigned int count);
+
+int zd_chip_set_channel(struct zd_chip *chip, u8 channel);
+static inline u8 _zd_chip_get_channel(struct zd_chip *chip)
+{
+ return chip->rf.channel;
+}
+u8 zd_chip_get_channel(struct zd_chip *chip);
+int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain);
+void zd_get_e2p_mac_addr(struct zd_chip *chip, u8 *mac_addr);
+int zd_read_mac_addr(struct zd_chip *chip, u8 *mac_addr);
+int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr);
+int zd_chip_switch_radio_on(struct zd_chip *chip);
+int zd_chip_switch_radio_off(struct zd_chip *chip);
+int zd_chip_enable_int(struct zd_chip *chip);
+void zd_chip_disable_int(struct zd_chip *chip);
+int zd_chip_enable_rx(struct zd_chip *chip);
+void zd_chip_disable_rx(struct zd_chip *chip);
+int zd_chip_enable_hwint(struct zd_chip *chip);
+int zd_chip_disable_hwint(struct zd_chip *chip);
+
+static inline int zd_get_encryption_type(struct zd_chip *chip, u32 *type)
+{
+ return zd_ioread32(chip, CR_ENCRYPTION_TYPE, type);
+}
+
+static inline int zd_set_encryption_type(struct zd_chip *chip, u32 type)
+{
+ return zd_iowrite32(chip, CR_ENCRYPTION_TYPE, type);
+}
+
+static inline int zd_chip_get_basic_rates(struct zd_chip *chip, u16 *cr_rates)
+{
+ return zd_ioread16(chip, CR_BASIC_RATE_TBL, cr_rates);
+}
+
+int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates);
+
+static inline int zd_chip_set_rx_filter(struct zd_chip *chip, u32 filter)
+{
+ return zd_iowrite32(chip, CR_RX_FILTER, filter);
+}
+
+int zd_chip_lock_phy_regs(struct zd_chip *chip);
+int zd_chip_unlock_phy_regs(struct zd_chip *chip);
+
+enum led_status {
+ LED_OFF = 0,
+ LED_ON = 1,
+ LED_FLIP = 2,
+ LED_STATUS = 3,
+};
+
+int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status);
+int zd_chip_led_flip(struct zd_chip *chip, int led,
+ const unsigned int *phases_msecs, unsigned int count);
+
+int zd_set_beacon_interval(struct zd_chip *chip, u32 interval);
+
+static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval)
+{
+ return zd_ioread32(chip, CR_BCN_INTERVAL, interval);
+}
+
+struct rx_status;
+
+u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
+ const struct rx_status *status);
+u8 zd_rx_strength_percent(u8 rssi);
+
+u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
+
+#endif /* _ZD_CHIP_H */