diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 23 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 | ||||
-rw-r--r-- | drivers/net/wireless/b43/dma.c | 20 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt73usb.c | 1 | ||||
-rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 11 | ||||
-rw-r--r-- | drivers/net/wireless/wl1251/acx.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/wl1251/cmd.c | 2 |
9 files changed, 49 insertions, 26 deletions
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index f54dff44ed5..c3119a6caac 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1735,6 +1735,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) if (dma_mapping_error(ah->dev, bf->skbaddr)) { ATH5K_ERR(ah, "beacon DMA mapping failed\n"); + dev_kfree_skb_any(skb); + bf->skb = NULL; return -EIO; } @@ -1819,8 +1821,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) ath5k_txbuf_free_skb(ah, avf->bbuf); avf->bbuf->skb = skb; ret = ath5k_beacon_setup(ah, avf->bbuf); - if (ret) - avf->bbuf->skb = NULL; out: return ret; } @@ -1840,6 +1840,7 @@ ath5k_beacon_send(struct ath5k_hw *ah) struct ath5k_vif *avf; struct ath5k_buf *bf; struct sk_buff *skb; + int err; ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n"); @@ -1888,11 +1889,6 @@ ath5k_beacon_send(struct ath5k_hw *ah) avf = (void *)vif->drv_priv; bf = avf->bbuf; - if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || - ah->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } /* * Stop any current dma and put the new frame on the queue. @@ -1906,8 +1902,17 @@ ath5k_beacon_send(struct ath5k_hw *ah) /* refresh the beacon for AP or MESH mode */ if (ah->opmode == NL80211_IFTYPE_AP || - ah->opmode == NL80211_IFTYPE_MESH_POINT) - ath5k_beacon_update(ah->hw, vif); + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + err = ath5k_beacon_update(ah->hw, vif); + if (err) + return; + } + + if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || + ah->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb); + return; + } trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index d109c25417f..c34bef1bf2b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -307,7 +307,7 @@ static const struct ar9300_eeprom ar9300_default = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -884,7 +884,7 @@ static const struct ar9300_eeprom ar9300_x113 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -2040,7 +2040,7 @@ static const struct ar9300_eeprom ar9300_x112 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -3734,7 +3734,7 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah) } } else { reg_pmu_set = (5 << 1) | (7 << 4) | - (1 << 8) | (2 << 14) | + (2 << 8) | (2 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | (1 << 28); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 6de3f0bc18e..5c590429f12 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -850,7 +850,7 @@ #define AR_PHY_TPC_11_B1 (AR_SM1_BASE + 0x220) #define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + 0x240) #define AR_PHY_TX_IQCAL_STATUS_B1 (AR_SM1_BASE + 0x48c) -#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM_BASE + 0x450 + ((_i) << 2)) +#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM1_BASE + 0x450 + ((_i) << 2)) /* * Channel 2 Register Map diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 83cba22ac6e..481e534534e 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -795,9 +795,23 @@ static u64 supported_dma_mask(struct b43_wldev *dev) u32 tmp; u16 mmio_base; - tmp = b43_read32(dev, SSB_TMSHIGH); - if (tmp & SSB_TMSHIGH_DMA64) - return DMA_BIT_MASK(64); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST); + if (tmp & BCMA_IOST_DMA64) + return DMA_BIT_MASK(64); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); + if (tmp & SSB_TMSHIGH_DMA64) + return DMA_BIT_MASK(64); + break; +#endif + } + mmio_base = b43_dmacontroller_base(0, 0); b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK); tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 507559361d8..939563162fb 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -921,6 +921,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c16) }, /* Draytek */ { USB_DEVICE(0x07fa, 0x7712) }, + /* DVICO */ + { USB_DEVICE(0x0fe9, 0xb307) }, /* Edimax */ { USB_DEVICE(0x7392, 0x7711) }, { USB_DEVICE(0x7392, 0x7717) }, diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 6a93939f44e..0baeb894f09 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2420,6 +2420,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* Buffalo */ { USB_DEVICE(0x0411, 0x00d8) }, { USB_DEVICE(0x0411, 0x00d9) }, + { USB_DEVICE(0x0411, 0x00e6) }, { USB_DEVICE(0x0411, 0x00f4) }, { USB_DEVICE(0x0411, 0x0116) }, { USB_DEVICE(0x0411, 0x0119) }, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 942f7a3969a..ef63c0df006 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -281,6 +281,8 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)}, /* 8188CE-VAU USB minCard (b/g mode only) */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)}, + /* 8188RU in Alfa AWUS036NHR */ + {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)}, /* 8188 Combo for BC4 */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)}, @@ -303,20 +305,23 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ /* HP - Lite-On ,8188CUS Slim Combo */ {RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */ {RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/ {RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/ {RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/ {RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/ {RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/ - {RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/ + {RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/ /* Russian customer -Azwave (8188CE-VAU b/g mode only) */ - {RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */ + {RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */ + {RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */ /****** 8192CU ********/ {RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/ {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/ - {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/ {RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/ {RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/ {RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/ diff --git a/drivers/net/wireless/wl1251/acx.c b/drivers/net/wireless/wl1251/acx.c index ef8370edace..ad87a1ac646 100644 --- a/drivers/net/wireless/wl1251/acx.c +++ b/drivers/net/wireless/wl1251/acx.c @@ -140,8 +140,6 @@ int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth) auth->sleep_auth = sleep_auth; ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; out: kfree(auth); @@ -681,10 +679,8 @@ int wl1251_acx_cca_threshold(struct wl1251 *wl) ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD, detection, sizeof(*detection)); - if (ret < 0) { + if (ret < 0) wl1251_warning("failed to set cca threshold: %d", ret); - return ret; - } out: kfree(detection); diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c index 81f164bc488..d14d69d733a 100644 --- a/drivers/net/wireless/wl1251/cmd.c +++ b/drivers/net/wireless/wl1251/cmd.c @@ -241,7 +241,7 @@ int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable) if (ret < 0) { wl1251_error("tx %s cmd for channel %d failed", enable ? "start" : "stop", channel); - return ret; + goto out; } wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", |