diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/airo_cs.c | 19 | ||||
-rw-r--r-- | drivers/net/wireless/atmel_cs.c | 11 | ||||
-rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 13 | ||||
-rw-r--r-- | drivers/net/wireless/netwave_cs.c | 18 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco_cs.c | 19 | ||||
-rw-r--r-- | drivers/net/wireless/ray_cs.c | 30 | ||||
-rw-r--r-- | drivers/net/wireless/spectrum_cs.c | 19 | ||||
-rw-r--r-- | drivers/net/wireless/wavelan_cs.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/wl3501_cs.c | 15 |
9 files changed, 19 insertions, 158 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index ac9437d497f..f12355398fe 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -219,21 +219,6 @@ static int airo_config(struct pcmcia_device *link) dev = link->priv; DEBUG(0, "airo_config(0x%p)\n", link); - - /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; /* In this loop, we scan the CIS for configuration table entries, @@ -247,6 +232,10 @@ static int airo_config(struct pcmcia_device *link) these things without consulting the CIS, and most client drivers will only use the CIS to fill in implementation-defined details. */ + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); while (1) { diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 5c410989c4d..12617cd0b78 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -244,17 +244,6 @@ static int atmel_config(struct pcmcia_device *link) tuple.TupleOffset = 0; /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - - /* In this loop, we scan the CIS for configuration table entries, each of which describes a valid card configuration, including voltage, IO window, memory window, and interrupt settings. diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index f63909e4bc3..ee542ec6d6a 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -293,15 +293,12 @@ static int sandisk_enable_wireless(struct net_device *dev) goto done; } - tuple.DesiredTuple = CISTPL_MANFID; tuple.Attributes = TUPLE_RETURN_COMMON; tuple.TupleData = buf; tuple.TupleDataMax = sizeof(buf); tuple.TupleOffset = 0; - if (pcmcia_get_first_tuple(hw_priv->link, &tuple) || - pcmcia_get_tuple_data(hw_priv->link, &tuple) || - pcmcia_parse_tuple(hw_priv->link, &tuple, parse) || - parse->manfid.manf != 0xd601 || parse->manfid.card != 0x0101) { + + if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) { /* No SanDisk manfid found */ ret = -ENODEV; goto done; @@ -573,16 +570,10 @@ static int prism2_config(struct pcmcia_device *link) } memset(hw_priv, 0, sizeof(*hw_priv)); - tuple.DesiredTuple = CISTPL_CONFIG; tuple.Attributes = 0; tuple.TupleData = buf; tuple.TupleDataMax = sizeof(buf); tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, parse)); - link->conf.ConfigBase = parse->config.base; - link->conf.Present = parse->config.rmask[0]; CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index 6714e0dfa8d..644b4741ef7 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -735,10 +735,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) static int netwave_pcmcia_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; netwave_private *priv = netdev_priv(dev); - tuple_t tuple; - cisparse_t parse; int i, j, last_ret, last_fn; - u_char buf[64]; win_req_t req; memreq_t mem; u_char __iomem *ramBase = NULL; @@ -746,21 +743,6 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link); /* - This reads the card's CONFIG tuple to find its configuration - registers. - */ - tuple.Attributes = 0; - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CONFIG; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - - /* * Try allocating IO ports. This tries a few fixed addresses. * If you want, you can also read the card's config table to * pick addresses -- see the serial driver for an example. diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index bc14689cbf2..d08ae8d2726 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -178,21 +178,6 @@ orinoco_cs_config(struct pcmcia_device *link) cisparse_t parse; void __iomem *mem; - /* - * This reads the card's CONFIG tuple to find its - * configuration registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - /* Look up the current Vcc */ CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); @@ -211,6 +196,10 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); while (1) { diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 7fbfc9e41d0..88e10c9bc4a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -408,11 +408,8 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; int last_fn = 0, last_ret = 0; int i; - u_char buf[MAX_TUPLE_SIZE]; win_req_t req; memreq_t mem; struct net_device *dev = (struct net_device *)link->priv; @@ -420,29 +417,12 @@ static int ray_config(struct pcmcia_device *link) DEBUG(1, "ray_config(0x%p)\n", link); - /* This reads the card's CONFIG tuple to find its configuration regs */ - tuple.DesiredTuple = CISTPL_CONFIG; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - tuple.TupleData = buf; - tuple.TupleDataMax = MAX_TUPLE_SIZE; - tuple.TupleOffset = 0; - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - /* Determine card type and firmware version */ - buf[0] = buf[MAX_TUPLE_SIZE - 1] = 0; - tuple.DesiredTuple = CISTPL_VERS_1; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - tuple.TupleData = buf; - tuple.TupleDataMax = MAX_TUPLE_SIZE; - tuple.TupleOffset = 2; - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - - for (i=0; i<tuple.TupleDataLen - 4; i++) - if (buf[i] == 0) buf[i] = ' '; - printk(KERN_INFO "ray_cs Detected: %s\n",buf); + printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n", + link->prod_id[0] ? link->prod_id[0] : " ", + link->prod_id[1] ? link->prod_id[1] : " ", + link->prod_id[2] ? link->prod_id[2] : " ", + link->prod_id[3] ? link->prod_id[3] : " "); /* Now allocate an interrupt line. Note that this does not actually assign a handler to the interrupt. diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index bcc7038130f..cf2d1486b01 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -647,21 +647,6 @@ spectrum_cs_config(struct pcmcia_device *link) cisparse_t parse; void __iomem *mem; - /* - * This reads the card's CONFIG tuple to find its - * configuration registers. - */ - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - /* Look up the current Vcc */ CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); @@ -681,6 +666,10 @@ spectrum_cs_config(struct pcmcia_device *link) * implementation-defined details. */ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); while (1) { cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index aafb301041b..233d906c08f 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3939,11 +3939,8 @@ wv_hw_reset(struct net_device * dev) static inline int wv_pcmcia_config(struct pcmcia_device * link) { - tuple_t tuple; - cisparse_t parse; struct net_device * dev = (struct net_device *) link->priv; int i; - u_char buf[64]; win_req_t req; memreq_t mem; net_local * lp = netdev_priv(dev); @@ -3953,36 +3950,6 @@ wv_pcmcia_config(struct pcmcia_device * link) printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link); #endif - /* - * This reads the card's CONFIG tuple to find its configuration - * registers. - */ - do - { - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CONFIG; - i = pcmcia_get_first_tuple(link, &tuple); - if(i != CS_SUCCESS) - break; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - i = pcmcia_get_tuple_data(link, &tuple); - if(i != CS_SUCCESS) - break; - i = pcmcia_parse_tuple(link, &tuple, &parse); - if(i != CS_SUCCESS) - break; - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - } - while(0); - if(i != CS_SUCCESS) - { - cs_error(link, ParseTuple, i); - return FALSE; - } - do { i = pcmcia_request_io(link, &link->io); diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 5b98a787698..583e0d655a9 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1966,25 +1966,10 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) */ static int wl3501_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; struct net_device *dev = link->priv; int i = 0, j, last_fn, last_ret; - unsigned char bf[64]; struct wl3501_card *this; - /* This reads the card's CONFIG tuple to find its config registers. */ - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CONFIG; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - tuple.TupleData = bf; - tuple.TupleDataMax = sizeof(bf); - tuple.TupleOffset = 0; - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; - /* Try allocating IO ports. This tries a few fixed addresses. If you * want, you can also read the card's config table to pick addresses -- * see the serial driver for an example. */ |