4 files changed, 20 insertions, 18 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index 2545123931e..65e0416be5b 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -225,7 +225,7 @@ static void wl1251_boot_set_ecpu_ctrl(struct wl1251 *wl, u32 flag)
 int wl1251_boot_run_firmware(struct wl1251 *wl)
 {
 	int loop, ret;
-	u32 chip_id, interrupt;
+	u32 chip_id, acx_intr;
 
 	wl1251_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
@@ -242,15 +242,15 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		interrupt = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		acx_intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 
-		if (interrupt == 0xffffffff) {
+		if (acx_intr == 0xffffffff) {
 			wl1251_error("error reading hardware complete "
 				     "init indication");
 			return -EIO;
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
-		else if (interrupt & WL1251_ACX_INTR_INIT_COMPLETE) {
+		else if (acx_intr & WL1251_ACX_INTR_INIT_COMPLETE) {
 			wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
 					   WL1251_ACX_INTR_INIT_COMPLETE);
 			break;
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.h b/drivers/net/wireless/wl12xx/wl1251_cmd.h
index 4ad67cae94d..ca1cb24d663 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.h
@@ -175,8 +175,8 @@ struct cmd_read_write_memory {
 #define WL1251_SCAN_NUM_PROBES 3
 
 struct wl1251_scan_parameters {
-	u32 rx_config_options;
-	u32 rx_filter_options;
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
 
 	/*
 	 * Scan options:
@@ -186,7 +186,7 @@ struct wl1251_scan_parameters {
 	 * bit 2: voice mode, 0 for normal scan.
 	 * bit 3: scan priority, 1 for high priority.
 	 */
-	u16 scan_options;
+	__le16 scan_options;
 
 	/* Number of channels to scan */
 	u8 num_channels;
@@ -195,7 +195,7 @@ struct wl1251_scan_parameters {
 	u8 num_probe_requests;
 
 	/* Rate and modulation for probe requests */
-	u16 tx_rate;
+	__le16 tx_rate;
 
 	u8 tid_trigger;
 	u8 ssid_len;
@@ -204,8 +204,8 @@ struct wl1251_scan_parameters {
 } __attribute__ ((packed));
 
 struct wl1251_scan_ch_parameters {
-	u32 min_duration; /* in TU */
-	u32 max_duration; /* in TU */
+	__le32 min_duration; /* in TU */
+	__le32 max_duration; /* in TU */
 	u32 bssid_lsb;
 	u16 bssid_msb;
 
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.c b/drivers/net/wireless/wl12xx/wl1251_tx.c
index c8223185efd..a38ec199187 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.c
@@ -117,7 +117,7 @@ static void wl1251_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
 	frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
 	tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
 
-	payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+	payload_len = le16_to_cpu(tx_hdr->length) + MAX_MSDU_SECURITY_LENGTH;
 
 	if (payload_len > frag_threshold) {
 		mem_blocks_per_frag =
@@ -191,11 +191,13 @@ static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb,
 	if (control->control.hw_key &&
 	    control->control.hw_key->alg == ALG_TKIP) {
 		int hdrlen;
-		u16 fc;
+		__le16 fc;
+		u16 length;
 		u8 *pos;
 
-		fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
-		tx_hdr->length += WL1251_TKIP_IV_SPACE;
+		fc = *(__le16 *)(skb->data + sizeof(*tx_hdr));
+		length = le16_to_cpu(tx_hdr->length) + WL1251_TKIP_IV_SPACE;
+		tx_hdr->length = cpu_to_le16(length);
 
 		hdrlen = ieee80211_hdrlen(fc);
 
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.h b/drivers/net/wireless/wl12xx/wl1251_tx.h
index 55856c6bb97..dff127f4fa8 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.h
@@ -114,7 +114,7 @@ struct tx_control {
 
 struct tx_double_buffer_desc {
 	/* Length of payload, including headers. */
-	u16 length;
+	__le16 length;
 
 	/*
 	 * A bit mask that specifies the initial rate to be used
@@ -133,10 +133,10 @@ struct tx_double_buffer_desc {
 	 * 0x0800 - 48Mbits
 	 * 0x1000 - 54Mbits
 	 */
-	u16 rate;
+	__le16 rate;
 
 	/* Time in us that a packet can spend in the target */
-	u32 expiry_time;
+	__le32 expiry_time;
 
 	/* index of the TX queue used for this packet */
 	u8 xmit_queue;
@@ -150,7 +150,7 @@ struct tx_double_buffer_desc {
 	 * The FW should cut the packet into fragments
 	 * of this size.
 	 */
-	u16 frag_threshold;
+	__le16 frag_threshold;
 
 	/* Numbers of HW queue blocks to be allocated */
 	u8 num_mem_blocks;