diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/airo_cs.c | 34 | ||||
-rw-r--r-- | drivers/net/wireless/atmel_cs.c | 28 | ||||
-rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 43 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/if_cs.c | 16 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/orinoco_cs.c | 41 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/spectrum_cs.c | 45 |
6 files changed, 29 insertions, 178 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 63bf662e9c7..77682f27772 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -137,36 +137,12 @@ static void airo_detach(struct pcmcia_device *link) ======================================================================*/ -static int airo_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -180,7 +156,7 @@ static int airo_config(struct pcmcia_device *link) dev_dbg(&link->dev, "airo_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | - CONF_AUTO_AUDIO; + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; /* * In this loop, we scan the CIS for configuration table diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 812decd3fbe..20293802211 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -154,31 +154,11 @@ static int card_present(void *arg) return 0; } -static int atmel_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -194,7 +174,7 @@ static int atmel_config(struct pcmcia_device *link) dev_dbg(&link->dev, "atmel_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | - CONF_AUTO_AUDIO; + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; /* In this loop, we scan the CIS for configuration table entries, diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index d4f19af1757..e57b20134d3 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -469,46 +469,11 @@ static void prism2_detach(struct pcmcia_device *link) /* run after a CARD_INSERTION event is received to configure the PCMCIA * socket and make the device available to the system */ -static int prism2_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt->index); - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt->io.nwin=%d\n", - cfg->io.nwin, dflt->io.nwin); - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -531,7 +496,7 @@ static int prism2_config(struct pcmcia_device *link) /* Look for an appropriate configuration table entry in the CIS */ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | - CONF_AUTO_CHECK_VCC; + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, prism2_config_check, NULL); diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 031f3e6da3c..2c6f28ac519 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -794,20 +794,12 @@ static void if_cs_release(struct pcmcia_device *p_dev) * insertion event. */ -static int if_cs_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - if (cfg->io.nwin != 1) { + if (p_dev->resource[1]->end) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); return -ENODEV; } @@ -833,6 +825,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index b92173827b5..263dfe9e0e3 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -142,42 +142,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link) * device available to the system. */ -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -202,7 +172,8 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index f462c78856e..78446507873 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -205,48 +205,12 @@ static void spectrum_cs_detach(struct pcmcia_device *link) */ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -271,7 +235,8 @@ spectrum_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); |