10 files changed, 20 insertions, 36 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 28aa05f60c2..f8f0156dff4 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -138,7 +138,7 @@ config AIRO_CS
 
 config PCMCIA_WL3501
 	tristate "Planet WL3501 PCMCIA cards"
-	depends on EXPERIMENTAL && PCMCIA
+	depends on PCMCIA
 	select WIRELESS_EXT
 	select WEXT_SPY
 	help
@@ -148,7 +148,7 @@ config PCMCIA_WL3501
 
 config PRISM54
 	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
-	depends on PCI && EXPERIMENTAL
+	depends on PCI
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
@@ -187,7 +187,7 @@ config USB_ZD1201
 
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
-	depends on USB && EXPERIMENTAL
+	depends on USB
 	depends on CFG80211
 	select USB_USBNET
 	select USB_NET_CDCETHER
@@ -217,7 +217,7 @@ source "drivers/net/wireless/rtl818x/Kconfig"
 
 config ADM8211
 	tristate "ADMtek ADM8211 support"
-	depends on MAC80211 && PCI && EXPERIMENTAL
+	depends on MAC80211 && PCI
 	select CRC32
 	select EEPROM_93CX6
 	---help---
@@ -257,7 +257,7 @@ config MAC80211_HWSIM
 
 config MWL8K
 	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
-	depends on MAC80211 && PCI && EXPERIMENTAL
+	depends on MAC80211 && PCI
 	---help---
 	  This driver supports Marvell TOPDOG 802.11 wireless cards.
 
diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index 26c4b722085..630c83db056 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -18,7 +18,6 @@ config ATH6KL_USB
 	depends on ATH6KL
 	depends on USB
 	depends on CFG80211
-	depends on EXPERIMENTAL
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros AR6004 chipset running over USB. This is still under
diff --git a/drivers/net/wireless/ath/carl9170/Kconfig b/drivers/net/wireless/ath/carl9170/Kconfig
index 13a20459876..1a796e5f69e 100644
--- a/drivers/net/wireless/ath/carl9170/Kconfig
+++ b/drivers/net/wireless/ath/carl9170/Kconfig
@@ -1,6 +1,6 @@
 config CARL9170
 	tristate "Linux Community AR9170 802.11n USB support"
-	depends on USB && MAC80211 && EXPERIMENTAL
+	depends on USB && MAC80211
 	select ATH_COMMON
 	select FW_LOADER
 	select CRC32
diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
index 6a315ba5aa7..e5712f026c4 100644
--- a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
+++ b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
@@ -1,25 +1,15 @@
 #ifndef WIL_DBG_HEXDUMP_H_
 #define WIL_DBG_HEXDUMP_H_
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize,	\
-			     groupsize, buf, len, ascii)	\
-do {								\
-	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor,		\
-		__builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\
-	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
-		print_hex_dump(KERN_DEBUG, prefix_str,		\
-			       prefix_type, rowsize, groupsize,	\
-			       buf, len, ascii);		\
-} while (0)
+#include <linux/printk.h>
+#include <linux/dynamic_debug.h>
 
+#if defined(CONFIG_DYNAMIC_DEBUG)
 #define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize,	\
 				 groupsize, buf, len, ascii)		\
-	wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize,		\
+	dynamic_hex_dump(prefix_str, prefix_type, rowsize,		\
 			     groupsize, buf, len, ascii)
 
-#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len)	\
-	wil_dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
 #else /* defined(CONFIG_DYNAMIC_DEBUG) */
 #define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize,	\
 				 groupsize, buf, len, ascii)		\
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 7a28d21ac38..287c6b670a3 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -78,8 +78,8 @@ config B43_PCMCIA
 	  If unsure, say N.
 
 config B43_SDIO
-	bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)"
-	depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL
+	bool "Broadcom 43xx SDIO device support"
+	depends on B43 && SSB_SDIOHOST_POSSIBLE
 	select SSB_SDIOHOST
 	---help---
 	  Broadcom 43xx device support for Soft-MAC SDIO devices.
@@ -109,8 +109,8 @@ config B43_PIO
 	default y
 
 config B43_PHY_N
-	bool "Support for 802.11n (N-PHY) devices (EXPERIMENTAL)"
-	depends on B43 && EXPERIMENTAL
+	bool "Support for 802.11n (N-PHY) devices"
+	depends on B43
 	---help---
 	  Support for the N-PHY.
 
@@ -130,8 +130,8 @@ config B43_PHY_LP
 	  (802.11a support is optional, and currently disabled).
 
 config B43_PHY_HT
-	bool "Support for HT-PHY (high throughput) devices (EXPERIMENTAL)"
-	depends on B43 && EXPERIMENTAL
+	bool "Support for HT-PHY (high throughput) devices"
+	depends on B43
 	---help---
 	  Support for the HT-PHY.
 
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index 2715b101ade..91c0cb3c368 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -137,7 +137,7 @@ config IPW2200_PROMISCUOUS
 
 config IPW2200_QOS
         bool "Enable QoS support"
-        depends on IPW2200 && EXPERIMENTAL
+        depends on IPW2200
 
 config IPW2200_DEBUG
 	bool "Enable full debugging output in IPW2200 module."
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index 0ec55b50798..15ea36b51a6 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,6 +1,6 @@
 config P54_COMMON
 	tristate "Softmac Prism54 support"
-	depends on MAC80211 && EXPERIMENTAL
+	depends on MAC80211
 	select FW_LOADER
 	select CRC_CCITT
 	---help---
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index c7548da6573..44d6ead4334 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -82,7 +82,6 @@ config RT2800PCI_RT33XX
 
 config RT2800PCI_RT35XX
 	bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	default y
 	---help---
 	  This adds support for rt35xx wireless chipset family to the
@@ -92,7 +91,6 @@ config RT2800PCI_RT35XX
 
 config RT2800PCI_RT53XX
        bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
        default y
        ---help---
          This adds support for rt53xx wireless chipset family to the
@@ -101,7 +99,6 @@ config RT2800PCI_RT53XX
 
 config RT2800PCI_RT3290
        bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
        default y
        ---help---
          This adds support for rt3290 wireless chipset family to the
@@ -159,7 +156,6 @@ config RT2800USB_RT33XX
 
 config RT2800USB_RT35XX
 	bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	default y
 	---help---
 	  This adds support for rt35xx wireless chipset family to the
@@ -168,7 +164,6 @@ config RT2800USB_RT35XX
 
 config RT2800USB_RT53XX
        bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
        ---help---
          This adds support for rt53xx wireless chipset family to the
          rt2800usb driver.
diff --git a/drivers/net/wireless/rtl818x/Kconfig b/drivers/net/wireless/rtl818x/Kconfig
index 17d80fe556d..30332175bcd 100644
--- a/drivers/net/wireless/rtl818x/Kconfig
+++ b/drivers/net/wireless/rtl818x/Kconfig
@@ -3,7 +3,7 @@
 #
 config RTL8180
 	tristate "Realtek 8180/8185 PCI support"
-	depends on MAC80211 && PCI && EXPERIMENTAL
+	depends on MAC80211 && PCI
 	select EEPROM_93CX6
 	---help---
 	  This is a driver for RTL8180 and RTL8185 based cards.
diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig
index 5f809695f71..96c8e1de087 100644
--- a/drivers/net/wireless/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zd1211rw/Kconfig
@@ -1,6 +1,6 @@
 config ZD1211RW
 	tristate "ZyDAS ZD1211/ZD1211B USB-wireless support"
-	depends on USB && MAC80211 && EXPERIMENTAL
+	depends on USB && MAC80211
 	select FW_LOADER
 	---help---
 	  This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless