summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/airo_cs.c19
-rw-r--r--drivers/net/wireless/atmel_cs.c10
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c19
-rw-r--r--drivers/net/wireless/netwave_cs.c1
-rw-r--r--drivers/net/wireless/orinoco_cs.c18
-rw-r--r--drivers/net/wireless/ray_cs.c1
-rw-r--r--drivers/net/wireless/spectrum_cs.c16
-rw-r--r--drivers/net/wireless/wavelan_cs.c1
-rw-r--r--drivers/net/wireless/wl3501_cs.c1
9 files changed, 30 insertions, 56 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index adb90b679d7..2216c04a02a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -168,7 +168,6 @@ static int airo_attach(struct pcmcia_device *p_dev)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
@@ -294,16 +293,11 @@ static void airo_config(dev_link_t *link)
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
@@ -391,11 +385,10 @@ static void airo_config(dev_link_t *link)
link->dev = &dev->node;
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
- dev->node.dev_name, link->conf.ConfigIndex,
- link->conf.Vcc/10, link->conf.Vcc%10);
- if (link->conf.Vpp1)
- printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+ printk(KERN_INFO "%s: index 0x%02x: ",
+ dev->node.dev_name, link->conf.ConfigIndex);
+ if (link->conf.Vpp)
+ printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 89dbc783ff8..53fdaa22226 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -179,7 +179,6 @@ static int atmel_attach(struct pcmcia_device *p_dev)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
@@ -314,16 +313,11 @@ static void atmel_config(dev_link_t *link)
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 0fb62518545..69024bfb5bb 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -512,7 +512,6 @@ static int prism2_attach(struct pcmcia_device *p_dev)
memset(link, 0, sizeof(dev_link_t));
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
- link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
@@ -603,9 +602,6 @@ static int prism2_config(dev_link_t *link)
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(link->handle, &conf));
- PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info,
- ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc);
- link->conf.Vcc = conf.Vcc;
/* Look for an appropriate configuration table entry in the CIS */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -650,10 +646,10 @@ static int prism2_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
@@ -745,12 +741,11 @@ static int prism2_config(dev_link_t *link)
dev->base_addr = link->io.BasePort1;
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
- dev_info, link->conf.ConfigIndex,
- link->conf.Vcc / 10, link->conf.Vcc % 10);
- if (link->conf.Vpp1)
- printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
- link->conf.Vpp1 % 10);
+ printk(KERN_INFO "%s: index 0x%02x: ",
+ dev_info, link->conf.ConfigIndex);
+ if (link->conf.Vpp)
+ printk(", Vpp %d.%d", link->conf.Vpp / 10,
+ link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 545717b5e1e..23d6b3376e6 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -406,7 +406,6 @@ static int netwave_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 89e16cd1be8..75981d88a1e 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -218,8 +218,7 @@ orinoco_cs_config(dev_link_t *link)
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(handle, &conf));
- link->conf.Vcc = conf.Vcc;
+ pcmcia_get_configuration_info(link->handle, &conf));
/*
* In this loop, we scan the CIS for configuration table
@@ -274,10 +273,10 @@ orinoco_cs_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
@@ -373,12 +372,11 @@ orinoco_cs_config(dev_link_t *link)
link->state &= ~DEV_CONFIG_PENDING;
/* Finally, report what we've done */
- printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
- dev->name, link->conf.ConfigIndex,
- link->conf.Vcc / 10, link->conf.Vcc % 10);
- if (link->conf.Vpp1)
- printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
- link->conf.Vpp1 % 10);
+ printk(KERN_DEBUG "%s: index 0x%02x: ",
+ dev->name, link->conf.ConfigIndex);
+ if (link->conf.Vpp)
+ printk(", Vpp %d.%d", link->conf.Vpp / 10,
+ link->conf.Vpp % 10);
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index ed4bf5013f1..7d95587d09d 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -342,7 +342,6 @@ static int ray_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 0429f1dc7fa..7a4a80b01f9 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -692,7 +692,6 @@ spectrum_cs_config(dev_link_t *link)
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(handle, &conf));
- link->conf.Vcc = conf.Vcc;
/*
* In this loop, we scan the CIS for configuration table
@@ -747,10 +746,10 @@ spectrum_cs_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
@@ -851,12 +850,11 @@ spectrum_cs_config(dev_link_t *link)
link->state &= ~DEV_CONFIG_PENDING;
/* Finally, report what we've done */
- printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
- dev->name, link->conf.ConfigIndex,
- link->conf.Vcc / 10, link->conf.Vcc % 10);
- if (link->conf.Vpp1)
- printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
- link->conf.Vpp1 % 10);
+ printk(KERN_DEBUG "%s: index 0x%02x: ",
+ dev->name, link->conf.ConfigIndex);
+ if (link->conf.Vpp)
+ printk(", Vpp %d.%d", link->conf.Vpp / 10,
+ link->conf.Vpp % 10);
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 8cabcfe3a65..daa17dc3432 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4607,7 +4607,6 @@ wavelan_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* Chain drivers */
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3a93a8bb2e1..393b5cb7a52 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1976,7 +1976,6 @@ static int wl3501_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 01:46:41 +0000