summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.c1
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.h1
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c1
-rw-r--r--drivers/net/wireless/b43/main.c21
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/channel.c5
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c3
-rw-r--r--drivers/net/wireless/libertas/cfg.c1
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c1
-rw-r--r--drivers/net/wireless/libertas/main.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c68
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c71
11 files changed, 93 insertions, 85 deletions
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cfa91ab7acf..60b6a9daff7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -730,6 +730,7 @@ int ath9k_hw_init(struct ath_hw *ah)
case AR9300_DEVID_QCA955X:
case AR9300_DEVID_AR9580:
case AR9300_DEVID_AR9462:
+ case AR9485_DEVID_AR1111:
break;
default:
if (common->bus_ops->ath_bus_type == ATH_USB)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index dd0c146d81d..ce7332c64ef 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -49,6 +49,7 @@
#define AR9300_DEVID_AR9462 0x0034
#define AR9300_DEVID_AR9330 0x0035
#define AR9300_DEVID_QCA955X 0x0038
+#define AR9485_DEVID_AR1111 0x0037
#define AR5416_AR9100_DEVID 0x000b
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 87b89d55e63..d455de9162e 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */
{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */
{ PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */
+ { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E AR1111/AR9485 */
{ 0 }
};
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b80352b308d..a140165dfee 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev)
if (dev->dev->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
+ } else if (dev->dev->chip_id == 0x5354) {
+ /* Don't allow overtaking buttons GPIOs */
+ set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
}
- if (dev->dev->chip_id == 0x5354)
- set &= 0xff02;
+
if (0 /* FIXME: conditional unknown */ ) {
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0100);
- mask |= 0x0180;
- set |= 0x0180;
+ /* BT Coexistance Input */
+ mask |= 0x0080;
+ set |= 0x0080;
+ /* BT Coexistance Out */
+ mask |= 0x0100;
+ set |= 0x0100;
}
if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
+ /* PA is controlled by gpio 9, let ucode handle it */
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0200);
mask |= 0x0200;
set |= 0x0200;
}
- if (dev->dev->core_rev >= 2)
- mask |= 0x0010; /* FIXME: This is redundant. */
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
(bcma_cc_read32(&dev->dev->bdev->bus->drv_cc,
- BCMA_CC_GPIOCTL) & mask) | set);
+ BCMA_CC_GPIOCTL) & ~mask) | set);
break;
#endif
#ifdef CONFIG_B43_SSB
@@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
if (gpiodev)
ssb_write32(gpiodev, B43_GPIO_CONTROL,
(ssb_read32(gpiodev, B43_GPIO_CONTROL)
- & mask) | set);
+ & ~mask) | set);
break;
#endif
}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 9a4c63f927c..7ed7d757702 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -382,9 +382,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
{
struct brcms_c_info *wlc = wlc_cm->wlc;
struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
- const struct ieee80211_reg_rule *reg_rule;
struct txpwr_limits txpwr;
- int ret;
brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);
@@ -393,8 +391,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
);
/* set or restore gmode as required by regulatory */
- ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, &reg_rule);
- if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM))
+ if (ch->flags & IEEE80211_CHAN_NO_OFDM)
brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
else
brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 9e79d47e077..192ad5c1fcc 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -121,7 +121,8 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = {
IEEE80211_CHAN_NO_HT40PLUS),
CHAN2GHZ(14, 2484,
IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+ IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
+ IEEE80211_CHAN_NO_OFDM)
};
static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index eb5de800ed9..1c10b542ab2 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1254,6 +1254,7 @@ static int lbs_associate(struct lbs_private *priv,
netif_tx_wake_all_queues(priv->dev);
}
+ kfree(cmd);
done:
lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
return ret;
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 76caebaa439..e970897f6ab 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1314,6 +1314,7 @@ static void if_sdio_remove(struct sdio_func *func)
kfree(packet);
}
+ kfree(card);
lbs_deb_leave(LBS_DEB_SDIO);
}
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 58048189bd2..fe1ea43c514 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -571,7 +571,10 @@ static int lbs_thread(void *data)
netdev_info(dev, "Timeout submitting command 0x%04x\n",
le16_to_cpu(cmdnode->cmdbuf->command));
lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
- if (priv->reset_card)
+
+ /* Reset card, but only when it isn't in the process
+ * of being shutdown anyway. */
+ if (!dev->dismantle && priv->reset_card)
priv->reset_card(priv);
}
priv->cmd_timed_out = 0;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 88455b1b9fe..cb8c2aca54e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
mutex_unlock(&rt2x00dev->csr_mutex);
}
+static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+ int i, count;
+
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+ if (rt2x00_get_field32(reg, WLAN_EN))
+ return 0;
+
+ rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
+ rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
+ rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
+ rt2x00_set_field32(&reg, WLAN_EN, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+
+ udelay(REGISTER_BUSY_DELAY);
+
+ count = 0;
+ do {
+ /*
+ * Check PLL_LD & XTAL_RDY.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
+ if (rt2x00_get_field32(reg, PLL_LD) &&
+ rt2x00_get_field32(reg, XTAL_RDY))
+ break;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ if (i >= REGISTER_BUSY_COUNT) {
+
+ if (count >= 10)
+ return -EIO;
+
+ rt2800_register_write(rt2x00dev, 0x58, 0x018);
+ udelay(REGISTER_BUSY_DELAY);
+ rt2800_register_write(rt2x00dev, 0x58, 0x418);
+ udelay(REGISTER_BUSY_DELAY);
+ rt2800_register_write(rt2x00dev, 0x58, 0x618);
+ udelay(REGISTER_BUSY_DELAY);
+ count++;
+ } else {
+ count = 0;
+ }
+
+ rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+ rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
+ rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
+ rt2x00_set_field32(&reg, WLAN_RESET, 1);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(10);
+ rt2x00_set_field32(&reg, WLAN_RESET, 0);
+ rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+ udelay(10);
+ rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
+ } while (count != 0);
+
+ return 0;
+}
+
void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1)
@@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
{
unsigned int i;
u32 reg;
+ int retval;
+
+ if (rt2x00_rt(rt2x00dev, RT3290)) {
+ retval = rt2800_enable_wlan_rt3290(rt2x00dev);
+ if (retval)
+ return -EBUSY;
+ }
/*
* If driver doesn't wake up firmware here,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 235376e9cb0..98aa426a356 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
return rt2800_validate_eeprom(rt2x00dev);
}
-static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- int i, count;
-
- rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
- if (rt2x00_get_field32(reg, WLAN_EN))
- return 0;
-
- rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
- rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
- rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
- rt2x00_set_field32(&reg, WLAN_EN, 1);
- rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-
- udelay(REGISTER_BUSY_DELAY);
-
- count = 0;
- do {
- /*
- * Check PLL_LD & XTAL_RDY.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
- if (rt2x00_get_field32(reg, PLL_LD) &&
- rt2x00_get_field32(reg, XTAL_RDY))
- break;
- udelay(REGISTER_BUSY_DELAY);
- }
-
- if (i >= REGISTER_BUSY_COUNT) {
-
- if (count >= 10)
- return -EIO;
-
- rt2800_register_write(rt2x00dev, 0x58, 0x018);
- udelay(REGISTER_BUSY_DELAY);
- rt2800_register_write(rt2x00dev, 0x58, 0x418);
- udelay(REGISTER_BUSY_DELAY);
- rt2800_register_write(rt2x00dev, 0x58, 0x618);
- udelay(REGISTER_BUSY_DELAY);
- count++;
- } else {
- count = 0;
- }
-
- rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
- rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
- rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
- rt2x00_set_field32(&reg, WLAN_RESET, 1);
- rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
- udelay(10);
- rt2x00_set_field32(&reg, WLAN_RESET, 0);
- rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
- udelay(10);
- rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
- } while (count != 0);
-
- return 0;
-}
static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
@@ -1063,17 +1003,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
return retval;
/*
- * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan
- * clk for rt3290. That avoid the MCU fail in start phase.
- */
- if (rt2x00_rt(rt2x00dev, RT3290)) {
- retval = rt2800_enable_wlan_rt3290(rt2x00dev);
-
- if (retval)
- return retval;
- }
-
- /*
* This device has multiple filters for control frames
* and has a separate filter for PS Poll frames.
*/
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-18 00:02:46 +0000