diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 157 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-dev.h | 2 |
2 files changed, 81 insertions, 78 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6aeb82b6992..47b02147796 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1463,59 +1463,66 @@ static void iwl_nic_start(struct iwl_priv *priv) } +static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context); +static int iwl_mac_setup_register(struct iwl_priv *priv); + +static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first) +{ + const char *name_pre = priv->cfg->fw_name_pre; + + if (first) + priv->fw_index = priv->cfg->ucode_api_max; + else + priv->fw_index--; + + if (priv->fw_index < priv->cfg->ucode_api_min) { + IWL_ERR(priv, "no suitable firmware found!\n"); + return -ENOENT; + } + + sprintf(priv->firmware_name, "%s%d%s", + name_pre, priv->fw_index, ".ucode"); + + IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n", + priv->firmware_name); + + return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name, + &priv->pci_dev->dev, GFP_KERNEL, priv, + iwl_ucode_callback); +} + /** - * iwl_read_ucode - Read uCode images from disk file. + * iwl_ucode_callback - callback when firmware was loaded * - * Copy into buffers for card to fetch via bus-mastering + * If loaded successfully, copies the firmware into buffers + * for the card to fetch (via DMA). */ -static int iwl_read_ucode(struct iwl_priv *priv) +static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) { + struct iwl_priv *priv = context; struct iwl_ucode_header *ucode; - int ret = -EINVAL, index; - const struct firmware *ucode_raw; - const char *name_pre = priv->cfg->fw_name_pre; const unsigned int api_max = priv->cfg->ucode_api_max; const unsigned int api_min = priv->cfg->ucode_api_min; - char buf[25]; u8 *src; size_t len; u32 api_ver, build; u32 inst_size, data_size, init_size, init_data_size, boot_size; + int err; u16 eeprom_ver; - /* Ask kernel firmware_class module to get the boot firmware off disk. - * request_firmware() is synchronous, file is in memory on return. */ - for (index = api_max; index >= api_min; index--) { - sprintf(buf, "%s%d%s", name_pre, index, ".ucode"); - ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev); - if (ret < 0) { - IWL_ERR(priv, "%s firmware file req failed: %d\n", - buf, ret); - if (ret == -ENOENT) - continue; - else - goto error; - } else { - if (index < api_max) - IWL_ERR(priv, "Loaded firmware %s, " - "which is deprecated. " - "Please use API v%u instead.\n", - buf, api_max); - - IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n", - buf, ucode_raw->size); - break; - } + if (!ucode_raw) { + IWL_ERR(priv, "request for firmware file '%s' failed.\n", + priv->firmware_name); + goto try_again; } - if (ret < 0) - goto error; + IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n", + priv->firmware_name, ucode_raw->size); /* Make sure that we got at least the v1 header! */ if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) { IWL_ERR(priv, "File size way too small!\n"); - ret = -EINVAL; - goto err_release; + goto try_again; } /* Data from ucode file: header followed by uCode images */ @@ -1540,10 +1547,9 @@ static int iwl_read_ucode(struct iwl_priv *priv) IWL_ERR(priv, "Driver unable to support your firmware API. " "Driver supports v%u, firmware is v%u.\n", api_max, api_ver); - priv->ucode_ver = 0; - ret = -EINVAL; - goto err_release; + goto try_again; } + if (api_ver != api_max) IWL_ERR(priv, "Firmware has old API version. Expected v%u, " "got v%u. New firmware can be obtained " @@ -1585,6 +1591,12 @@ static int iwl_read_ucode(struct iwl_priv *priv) IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n", boot_size); + /* + * For any of the failures below (before allocating pci memory) + * we will try to load a version with a smaller API -- maybe the + * user just got a corrupted version of the latest API. + */ + /* Verify size of file vs. image size info in file's header */ if (ucode_raw->size != priv->cfg->ops->ucode->get_header_size(api_ver) + @@ -1594,41 +1606,35 @@ static int iwl_read_ucode(struct iwl_priv *priv) IWL_DEBUG_INFO(priv, "uCode file size %d does not match expected size\n", (int)ucode_raw->size); - ret = -EINVAL; - goto err_release; + goto try_again; } /* Verify that uCode images will fit in card's SRAM */ if (inst_size > priv->hw_params.max_inst_size) { IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n", inst_size); - ret = -EINVAL; - goto err_release; + goto try_again; } if (data_size > priv->hw_params.max_data_size) { IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n", data_size); - ret = -EINVAL; - goto err_release; + goto try_again; } if (init_size > priv->hw_params.max_inst_size) { IWL_INFO(priv, "uCode init instr len %d too large to fit in\n", init_size); - ret = -EINVAL; - goto err_release; + goto try_again; } if (init_data_size > priv->hw_params.max_data_size) { IWL_INFO(priv, "uCode init data len %d too large to fit in\n", init_data_size); - ret = -EINVAL; - goto err_release; + goto try_again; } if (boot_size > priv->hw_params.max_bsm_size) { IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n", boot_size); - ret = -EINVAL; - goto err_release; + goto try_again; } /* Allocate ucode buffers for card's bus-master loading ... */ @@ -1712,20 +1718,36 @@ static int iwl_read_ucode(struct iwl_priv *priv) IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len); memcpy(priv->ucode_boot.v_addr, src, len); + /************************************************** + * This is still part of probe() in a sense... + * + * 9. Setup and register with mac80211 and debugfs + **************************************************/ + err = iwl_mac_setup_register(priv); + if (err) + goto out_unbind; + + err = iwl_dbgfs_register(priv, DRV_NAME); + if (err) + IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); + /* We have our copies now, allow OS release its copies */ release_firmware(ucode_raw); - return 0; + return; + + try_again: + /* try next, if any */ + if (iwl_request_firmware(priv, false)) + goto out_unbind; + release_firmware(ucode_raw); + return; err_pci_alloc: IWL_ERR(priv, "failed to allocate pci memory\n"); - ret = -ENOMEM; iwl_dealloc_ucode_pci(priv); - - err_release: + out_unbind: + device_release_driver(&priv->pci_dev->dev); release_firmware(ucode_raw); - - error: - return ret; } static const char *desc_lookup_text[] = { @@ -2667,21 +2689,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw) /* we should be verifying the device is ready to be opened */ mutex_lock(&priv->mutex); - - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - - if (!priv->ucode_code.len) { - ret = iwl_read_ucode(priv); - if (ret) { - IWL_ERR(priv, "Could not read microcode: %d\n", ret); - mutex_unlock(&priv->mutex); - return ret; - } - } - ret = __iwl_up(priv); - mutex_unlock(&priv->mutex); if (ret) @@ -3654,17 +3662,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) iwl_power_initialize(priv); iwl_tt_initialize(priv); - /************************************************** - * 9. Setup and register with mac80211 and debugfs - **************************************************/ - err = iwl_mac_setup_register(priv); + err = iwl_request_firmware(priv, true); if (err) goto out_remove_sysfs; - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); - return 0; out_remove_sysfs: diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index ab891b95804..6054c5fba0c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1132,6 +1132,7 @@ struct iwl_priv { u8 rev_id; /* uCode images, save to reload in case of failure */ + int fw_index; /* firmware we're trying to load */ u32 ucode_ver; /* version of ucode, copy of iwl_ucode.ver */ struct fw_desc ucode_code; /* runtime inst */ @@ -1142,6 +1143,7 @@ struct iwl_priv { struct fw_desc ucode_boot; /* bootstrap inst */ enum ucode_type ucode_type; u8 ucode_write_complete; /* the image write is complete */ + char firmware_name[25]; struct iwl_rxon_time_cmd rxon_timing; |