diff options
Diffstat (limited to 'drivers/net/wireless')
188 files changed, 24142 insertions, 15526 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 9931b5ab59c..45bdf0b339b 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -300,6 +300,19 @@ config LIBERTAS_DEBUG ---help--- Debugging support. +config LIBERTAS_THINFIRM + tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" + depends on WLAN_80211 && MAC80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices using thinfirm. + +config LIBERTAS_THINFIRM_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" + depends on LIBERTAS_THINFIRM && USB + ---help--- + A driver for Marvell Libertas 8388 USB devices using thinfirm. + config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) @@ -322,6 +335,9 @@ config HERMES tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 select WIRELESS_EXT + select FW_LOADER + select CRYPTO + select CRYPTO_MICHAEL_MIC ---help--- A driver for 802.11b wireless cards based on the "Hermes" or Intersil HFA384x (Prism 2) MAC controller. This includes the vast @@ -411,7 +427,6 @@ config PCMCIA_HERMES config PCMCIA_SPECTRUM tristate "Symbol Spectrum24 Trilogy PCMCIA card support" depends on PCMCIA && HERMES - select FW_LOADER ---help--- This is a driver for 802.11b cards using RAM-loadable Symbol diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 59aa89ec6e8..59d2d805f60 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_WAVELAN) += wavelan.o obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o -obj-$(CONFIG_HERMES) += orinoco.o hermes.o +obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o obj-$(CONFIG_APPLE_AIRPORT) += airport.o obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o @@ -48,6 +48,8 @@ obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o obj-$(CONFIG_USB_ZD1201) += zd1201.o obj-$(CONFIG_LIBERTAS) += libertas/ +obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/ + rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 3333d4596b8..b2c050b6889 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -765,11 +765,11 @@ static void adm8211_update_mode(struct ieee80211_hw *dev) priv->soft_rx_crc = 0; switch (priv->mode) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA); priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR; break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: priv->nar &= ~ADM8211_NAR_PR; priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR; @@ -777,7 +777,7 @@ static void adm8211_update_mode(struct ieee80211_hw *dev) if (priv->pdev->revision >= ADM8211_REV_BA) priv->soft_rx_crc = 1; break; - case IEEE80211_IF_TYPE_MNTR: + case NL80211_IFTYPE_MONITOR: priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST); priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR; break; @@ -1410,11 +1410,11 @@ static int adm8211_add_interface(struct ieee80211_hw *dev, struct ieee80211_if_init_conf *conf) { struct adm8211_priv *priv = dev->priv; - if (priv->mode != IEEE80211_IF_TYPE_MNTR) + if (priv->mode != NL80211_IFTYPE_MONITOR) return -EOPNOTSUPP; switch (conf->type) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->mode = conf->type; break; default: @@ -1437,7 +1437,7 @@ static void adm8211_remove_interface(struct ieee80211_hw *dev, struct ieee80211_if_init_conf *conf) { struct adm8211_priv *priv = dev->priv; - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; } static int adm8211_init_rings(struct ieee80211_hw *dev) @@ -1556,7 +1556,7 @@ static int adm8211_start(struct ieee80211_hw *dev) ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE | ADM8211_IER_RCIE | ADM8211_IER_TCIE | ADM8211_IER_TDUIE | ADM8211_IER_GPTIE); - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; adm8211_update_mode(dev); ADM8211_CSR_WRITE(RDR, 0); @@ -1571,7 +1571,7 @@ static void adm8211_stop(struct ieee80211_hw *dev) { struct adm8211_priv *priv = dev->priv; - priv->mode = IEEE80211_IF_TYPE_INVALID; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; priv->nar = 0; ADM8211_CSR_WRITE(NAR, 0); ADM8211_CSR_WRITE(IER, 0); @@ -1884,6 +1884,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr); /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ dev->flags = IEEE80211_HW_SIGNAL_UNSPEC; + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); dev->channel_change_time = 1000; dev->max_signal = 100; /* FIXME: find better value */ @@ -1895,7 +1896,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, priv->tx_power = 0x40; priv->lpf_cutoff = 0xFF; priv->lnags_threshold = 0xFF; - priv->mode = IEEE80211_IF_TYPE_INVALID; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; /* Power-on issue. EEPROM won't read correctly without */ if (pdev->revision >= ADM8211_REV_BA) { @@ -1985,7 +1986,7 @@ static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state) struct ieee80211_hw *dev = pci_get_drvdata(pdev); struct adm8211_priv *priv = dev->priv; - if (priv->mode != IEEE80211_IF_TYPE_INVALID) { + if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) { ieee80211_stop_queues(dev); adm8211_stop(dev); } @@ -2003,7 +2004,7 @@ static int adm8211_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - if (priv->mode != IEEE80211_IF_TYPE_INVALID) { + if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) { adm8211_start(dev); ieee80211_wake_queues(dev); } diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index b5cd850a4a5..370133e492d 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1915,7 +1915,7 @@ static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct airo_info *ai = dev->priv; if (!skb) { - airo_print_err(dev->name, "%s: skb == NULL!",__FUNCTION__); + airo_print_err(dev->name, "%s: skb == NULL!",__func__); return 0; } npacks = skb_queue_len (&ai->txq); @@ -1964,7 +1964,7 @@ static int mpi_send_packet (struct net_device *dev) if ((skb = skb_dequeue(&ai->txq)) == NULL) { airo_print_err(dev->name, "%s: Dequeue'd zero in send_packet()", - __FUNCTION__); + __func__); return 0; } @@ -2115,7 +2115,7 @@ static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) { u32 *fids = priv->fids; if ( skb == NULL ) { - airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__); + airo_print_err(dev->name, "%s: skb == NULL!", __func__); return 0; } @@ -2186,7 +2186,7 @@ static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) { } if ( skb == NULL ) { - airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__); + airo_print_err(dev->name, "%s: skb == NULL!", __func__); return 0; } @@ -4127,7 +4127,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid)) airo_print_err(ai->dev->name, "%s: MAC should be disabled (rid=%04x)", - __FUNCTION__, rid); + __func__, rid); memset(&cmd, 0, sizeof(cmd)); memset(&rsp, 0, sizeof(rsp)); @@ -4142,7 +4142,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, &ai->config_desc.rid_desc, sizeof(Rid)); if (len < 4 || len > 2047) { - airo_print_err(ai->dev->name, "%s: len=%d", __FUNCTION__, len); + airo_print_err(ai->dev->name, "%s: len=%d", __func__, len); rc = -1; } else { memcpy((char *)ai->config_desc.virtual_host_addr, @@ -4151,9 +4151,9 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, rc = issuecommand(ai, &cmd, &rsp); if ((rc & 0xff00) != 0) { airo_print_err(ai->dev->name, "%s: Write rid Error %d", - __FUNCTION__, rc); + __func__, rc); airo_print_err(ai->dev->name, "%s: Cmd=%04x", - __FUNCTION__, cmd.cmd); + __func__, cmd.cmd); } if ((rsp.status & 0x7f00)) @@ -7107,7 +7107,7 @@ static int airo_get_aplist(struct net_device *dev, */ static int airo_set_scan(struct net_device *dev, struct iw_request_info *info, - struct iw_param *vwrq, + struct iw_point *dwrq, char *extra) { struct airo_info *ai = dev->priv; diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index f12355398fe..fd72e427cb2 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -147,7 +147,7 @@ static int airo_probe(struct pcmcia_device *p_dev) DEBUG(0, "airo_attach()\n"); /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; p_dev->irq.Handler = NULL; diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c index 6f7eb9f5922..ce03a2e865f 100644 --- a/drivers/net/wireless/airport.c +++ b/drivers/net/wireless/airport.c @@ -180,7 +180,8 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) } /* Allocate space for private device-specific data */ - dev = alloc_orinocodev(sizeof(*card), airport_hard_reset); + dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, + airport_hard_reset, NULL); if (! dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); return -ENODEV; diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile index 564ecd0c5d4..719cfaef708 100644 --- a/drivers/net/wireless/ath5k/Makefile +++ b/drivers/net/wireless/ath5k/Makefile @@ -1,6 +1,14 @@ -ath5k-y += base.o -ath5k-y += hw.o +ath5k-y += caps.o ath5k-y += initvals.o +ath5k-y += eeprom.o +ath5k-y += gpio.o +ath5k-y += desc.o +ath5k-y += dma.o +ath5k-y += qcu.o +ath5k-y += pcu.o ath5k-y += phy.o +ath5k-y += reset.o +ath5k-y += attach.o +ath5k-y += base.o ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index 9102eea3c8b..53ea439aff4 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -18,18 +18,23 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* Set this to 1 to disable regulatory domain restrictions for channel tests. - * WARNING: This is for debuging only and has side effects (eg. scan takes too - * long and results timeouts). It's also illegal to tune to some of the - * supported frequencies in some countries, so use this at your own risk, - * you've been warned. */ +/* TODO: Clean up channel debuging -doesn't work anyway- and start + * working on reg. control code using all available eeprom information + * -rev. engineering needed- */ #define CHAN_DEBUG 0 #include <linux/io.h> #include <linux/types.h> #include <net/mac80211.h> -#include "hw.h" +/* RX/TX descriptor hw structs + * TODO: Driver part should only see sw structs */ +#include "desc.h" + +/* EEPROM structs/offsets + * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) + * and clean up common bits, then introduce set/get functions in eeprom.c */ +#include "eeprom.h" /* PCI IDs */ #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ @@ -87,7 +92,92 @@ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access to PHY registers */ +#define AR5K_PHY_READ(ah, _reg) \ + ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_PHY_WRITE(ah, _reg, _val) \ + ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* Register dumps are done per operation mode */ +#define AR5K_INI_RFGAIN_5GHZ 0 +#define AR5K_INI_RFGAIN_2GHZ 1 + +/* TODO: Clean this up */ +#define AR5K_INI_VAL_11A 0 +#define AR5K_INI_VAL_11A_TURBO 1 +#define AR5K_INI_VAL_11B 2 +#define AR5K_INI_VAL_11G 3 +#define AR5K_INI_VAL_11G_TURBO 4 +#define AR5K_INI_VAL_XR 0 +#define AR5K_INI_VAL_MAX 5 + +#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS +#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + +/* Used for BSSID etc manipulation */ +#define AR5K_LOW_ID(_a)( \ +(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ +) + +#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) + +/* * Some tuneable values (these should be changeable by the user) + * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 @@ -98,13 +188,13 @@ #define AR5K_TUNE_REGISTER_TIMEOUT 20000 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to * be the max value. */ -#define AR5K_TUNE_RSSI_THRES 129 +#define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it * the BMISS_THRES will be seen as 0, seems harware doesn't keep * track of it. Max value depends on harware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ -#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 #define AR5K_TUNE_BEACON_INTERVAL 100 #define AR5K_TUNE_AIFS 2 @@ -123,6 +213,55 @@ #define AR5K_TUNE_ANT_DIVERSITY true #define AR5K_TUNE_HWTXTRIES 4 +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_TX_LATENCY 502 +#define AR5K_INIT_USEC 39 +#define AR5K_INIT_USEC_TURBO 79 +#define AR5K_INIT_USEC_32 31 +#define AR5K_INIT_SLOT_TIME 396 +#define AR5K_INIT_SLOT_TIME_TURBO 480 +#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 +#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 +#define AR5K_INIT_PROG_IFS 920 +#define AR5K_INIT_PROG_IFS_TURBO 960 +#define AR5K_INIT_EIFS 3440 +#define AR5K_INIT_EIFS_TURBO 6880 +#define AR5K_INIT_SIFS 560 +#define AR5K_INIT_SIFS_TURBO 480 +#define AR5K_INIT_SH_RETRY 10 +#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY +#define AR5K_INIT_SSH_RETRY 32 +#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY +#define AR5K_INIT_TX_RETRY 10 + +#define AR5K_INIT_TRANSMIT_LATENCY ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC) \ +) +#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC_TURBO) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ + (AR5K_INIT_PROG_IFS) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ + (AR5K_INIT_PROG_IFS_TURBO) \ +) + /* token to use for aifs, cwmin, cwmax in MadWiFi */ #define AR5K_TXQ_USEDEFAULT ((u32) -1) @@ -142,7 +281,9 @@ enum ath5k_radio { AR5K_RF5112 = 2, AR5K_RF2413 = 3, AR5K_RF5413 = 4, - AR5K_RF2425 = 5, + AR5K_RF2316 = 5, + AR5K_RF2317 = 6, + AR5K_RF2425 = 7, }; /* @@ -150,7 +291,7 @@ enum ath5k_radio { */ enum ath5k_srev_type { - AR5K_VERSION_VER, + AR5K_VERSION_MAC, AR5K_VERSION_RAD, }; @@ -162,23 +303,24 @@ struct ath5k_srev_name { #define AR5K_SREV_UNKNOWN 0xffff -#define AR5K_SREV_VER_AR5210 0x00 -#define AR5K_SREV_VER_AR5311 0x10 -#define AR5K_SREV_VER_AR5311A 0x20 -#define AR5K_SREV_VER_AR5311B 0x30 -#define AR5K_SREV_VER_AR5211 0x40 -#define AR5K_SREV_VER_AR5212 0x50 -#define AR5K_SREV_VER_AR5213 0x55 -#define AR5K_SREV_VER_AR5213A 0x59 -#define AR5K_SREV_VER_AR2413 0x78 -#define AR5K_SREV_VER_AR2414 0x79 -#define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */ -#define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */ -#define AR5K_SREV_VER_AR5413 0xa4 -#define AR5K_SREV_VER_AR5414 0xa5 -#define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */ -#define AR5K_SREV_VER_AR5418 0xca /* PCI-E */ -#define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */ +#define AR5K_SREV_AR5210 0x00 /* Crete */ +#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ +#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ +#define AR5K_SREV_AR5311B 0x30 /* Spirit */ +#define AR5K_SREV_AR5211 0x40 /* Oahu */ +#define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5213A 0x59 /* Hainan */ +#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ +#define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ +#define AR5K_SREV_AR5414 0xa0 /* Eagle */ +#define AR5K_SREV_AR2415 0xb0 /* Cobra */ +#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ +#define AR5K_SREV_AR5418 0xca /* PCI-E */ +#define AR5K_SREV_AR2425 0xe0 /* Swan */ +#define AR5K_SREV_AR2417 0xf0 /* Nala */ #define AR5K_SREV_RAD_5110 0x00 #define AR5K_SREV_RAD_5111 0x10 @@ -190,13 +332,22 @@ struct ath5k_srev_name { #define AR5K_SREV_RAD_2112 0x40 #define AR5K_SREV_RAD_2112A 0x45 #define AR5K_SREV_RAD_2112B 0x46 -#define AR5K_SREV_RAD_SC0 0x50 /* Found on 2413/2414 */ -#define AR5K_SREV_RAD_SC1 0x60 /* Found on 5413/5414 */ -#define AR5K_SREV_RAD_SC2 0xa0 /* Found on 2424-5/5424 */ -#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ +#define AR5K_SREV_RAD_2413 0x50 +#define AR5K_SREV_RAD_5413 0x60 +#define AR5K_SREV_RAD_2316 0x70 +#define AR5K_SREV_RAD_2317 0x80 +#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ +#define AR5K_SREV_RAD_2425 0xa2 +#define AR5K_SREV_RAD_5133 0xc0 + +#define AR5K_SREV_PHY_5211 0x30 +#define AR5K_SREV_PHY_5212 0x41 +#define AR5K_SREV_PHY_2112B 0x43 +#define AR5K_SREV_PHY_2413 0x45 +#define AR5K_SREV_PHY_5413 0x61 +#define AR5K_SREV_PHY_2425 0x70 /* IEEE defs */ - #define IEEE80211_MAX_LEN 2500 /* TODO add support to mac80211 for vendor-specific rates and modes */ @@ -268,27 +419,21 @@ enum ath5k_driver_mode { AR5K_MODE_MAX = 5 }; -/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ -#define AR5K_SET_SHORT_PREAMBLE 0x04 - -#define HAS_SHPREAMBLE(_ix) \ - (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE) -#define SHPREAMBLE_FLAG(_ix) \ - (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) - /****************\ TX DEFINITIONS \****************/ /* - * TX Status + * TX Status descriptor */ struct ath5k_tx_status { u16 ts_seqnum; u16 ts_tstamp; u8 ts_status; - u8 ts_rate; + u8 ts_rate[4]; + u8 ts_retry[4]; + u8 ts_final_idx; s8 ts_rssi; u8 ts_shortretry; u8 ts_longretry; @@ -354,7 +499,6 @@ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_XR_DATA = 9, }; - /* * Flags to set hw queue's parameters... */ @@ -387,7 +531,8 @@ struct ath5k_txq_info { /* * Transmit packet types. - * These are not fully used inside OpenHAL yet + * used on tx control descriptor + * TODO: Use them inside base.c corectly */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, @@ -430,7 +575,7 @@ enum ath5k_dmasize { \****************/ /* - * RX Status + * RX Status descriptor */ struct ath5k_rx_status { u16 rs_datalen; @@ -494,34 +639,59 @@ struct ath5k_beacon_state { #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +#define AR5K_GAIN_CRN_FIX_BITS_5111 4 +#define AR5K_GAIN_CRN_FIX_BITS_5112 7 +#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 +#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 +#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 +#define AR5K_GAIN_CCK_PROBE_CORR 5 +#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 +#define AR5K_GAIN_STEP_COUNT 10 +#define AR5K_GAIN_PARAM_TX_CLIP 0 +#define AR5K_GAIN_PARAM_PD_90 1 +#define AR5K_GAIN_PARAM_PD_84 2 +#define AR5K_GAIN_PARAM_GAIN_SEL 3 +#define AR5K_GAIN_PARAM_MIX_ORN 0 +#define AR5K_GAIN_PARAM_PD_138 1 +#define AR5K_GAIN_PARAM_PD_137 2 +#define AR5K_GAIN_PARAM_PD_136 3 +#define AR5K_GAIN_PARAM_PD_132 4 +#define AR5K_GAIN_PARAM_PD_131 5 +#define AR5K_GAIN_PARAM_PD_130 6 +#define AR5K_GAIN_CHECK_ADJUST(_g) \ + ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) + +struct ath5k_gain_opt_step { + s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; + s32 gos_gain; +}; + +struct ath5k_gain { + u32 g_step_idx; + u32 g_current; + u32 g_target; + u32 g_low; + u32 g_high; + u32 g_f_corr; + u32 g_active; + const struct ath5k_gain_opt_step *g_step; +}; + + /********************\ COMMON DEFINITIONS \********************/ -/* - * Atheros hardware descriptor - * This is read and written to by the hardware - */ -struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ - - union { - struct ath5k_hw_5210_tx_desc ds_tx5210; - struct ath5k_hw_5212_tx_desc ds_tx5212; - struct ath5k_hw_all_rx_desc ds_rx; - } ud; -} __packed; - -#define AR5K_RXDESC_INTREQ 0x0020 - -#define AR5K_TXDESC_CLRDMASK 0x0001 -#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ -#define AR5K_TXDESC_RTSENA 0x0004 -#define AR5K_TXDESC_CTSENA 0x0008 -#define AR5K_TXDESC_INTREQ 0x0010 -#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - #define AR5K_SLOT_TIME_9 396 #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff @@ -553,167 +723,79 @@ struct ath5k_desc { #define CHANNEL_MODES CHANNEL_ALL /* - * Used internaly in OpenHAL (ar5211.c/ar5212.c - * for reset_tx_queue). Also see struct struct ieee80211_channel. + * Used internaly for reset_tx_queue). + * Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) #define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) /* - * The following structure will be used to map 2GHz channels to + * The following structure is used to map 2GHz channels to * 5GHz Atheros channels. + * TODO: Clean up */ struct ath5k_athchan_2ghz { u32 a2_flags; u16 a2_athchan; }; -/* - * Rate definitions - * TODO: Clean them up or move them on mac80211 -most of these infos are - * used by the rate control algorytm on MadWiFi. - */ -/* Max number of rates on the rate table and what it seems - * Atheros hardware supports */ -#define AR5K_MAX_RATES 32 +/******************\ + RATE DEFINITIONS +\******************/ /** - * struct ath5k_rate - rate structure - * @valid: is this a valid rate for rate control (remove) - * @modulation: respective mac80211 modulation - * @rate_kbps: rate in kbit/s - * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on - * &struct ath5k_rx_status.rs_rate and on TX on - * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports - * up to 32 rates, indexed by 1-32. This means we really only need - * 6 bits for the rate_code. - * @dot11_rate: respective IEEE-802.11 rate value - * @control_rate: index of rate assumed to be used to send control frames. - * This can be used to set override the value on the rate duration - * registers. This is only useful if we can override in the harware at - * what rate we want to send control frames at. Note that IEEE-802.11 - * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we - * should send ACK/CTS, if we change this value we can be breaking - * the spec. + * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. * - * This structure is used to get the RX rate or set the TX rate on the + * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * - * On RX after the &struct ath5k_desc is parsed by the appropriate - * ah_proc_rx_desc() the respective hardware rate value is set in - * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in - * &struct ath5k_tx_status.ts_rate which is later used to setup the - * &struct ath5k_desc correctly. This is the hardware rate map we are - * aware of: + * This is the hardware rate map we are aware of: * - * rate_code 1 2 3 4 5 6 7 8 + * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 * rate_kbps 3000 1000 ? ? ? 2000 500 48000 * - * rate_code 9 10 11 12 13 14 15 16 + * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? * * rate_code 17 18 19 20 21 22 23 24 * rate_kbps ? ? ? ? ? ? ? 11000 * * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 ? ? ? ? ? + * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? * + * "S" indicates CCK rates with short preamble. + * + * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the + * lowest 4 bits, so they are the same as below with a 0xF mask. + * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). + * We handle this in ath5k_setup_bands(). */ -struct ath5k_rate { - u8 valid; - u32 modulation; - u16 rate_kbps; - u8 rate_code; - u8 dot11_rate; - u8 control_rate; -}; - -/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */ -struct ath5k_rate_table { - u16 rate_count; - u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */ - struct ath5k_rate rates[AR5K_MAX_RATES]; -}; - -/* - * Rate tables... - * TODO: CLEAN THIS !!! - */ -#define AR5K_RATES_11A { 8, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ - 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, 0, 6000, 11, 140, 0 }, \ - { 1, 0, 9000, 15, 18, 0 }, \ - { 1, 0, 12000, 10, 152, 2 }, \ - { 1, 0, 18000, 14, 36, 2 }, \ - { 1, 0, 24000, 9, 176, 4 }, \ - { 1, 0, 36000, 13, 72, 4 }, \ - { 1, 0, 48000, 8, 96, 4 }, \ - { 1, 0, 54000, 12, 108, 4 } } \ -} - -#define AR5K_RATES_11B { 4, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ - 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, 0, 1000, 27, 130, 0 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \ -} - -#define AR5K_RATES_11G { 12, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ - 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ - 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, 0, 1000, 27, 2, 0 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \ - { 0, 0, 6000, 11, 12, 4 }, \ - { 0, 0, 9000, 15, 18, 4 }, \ - { 1, 0, 12000, 10, 24, 6 }, \ - { 1, 0, 18000, 14, 36, 6 }, \ - { 1, 0, 24000, 9, 48, 8 }, \ - { 1, 0, 36000, 13, 72, 8 }, \ - { 1, 0, 48000, 8, 96, 8 }, \ - { 1, 0, 54000, 12, 108, 8 } } \ -} - -#define AR5K_RATES_TURBO { 8, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ - 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \ - { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \ - { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \ - { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \ - { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \ - { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \ - { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \ - { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \ -} +#define AR5K_MAX_RATES 32 -#define AR5K_RATES_XR { 12, { \ - 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \ - 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, MODULATION_XR, 500, 7, 129, 0 }, \ - { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ - { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ - { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ - { 1, 0, 6000, 11, 140, 4 }, \ - { 1, 0, 9000, 15, 18, 4 }, \ - { 1, 0, 12000, 10, 152, 6 }, \ - { 1, 0, 18000, 14, 36, 6 }, \ - { 1, 0, 24000, 9, 176, 8 }, \ - { 1, 0, 36000, 13, 72, 8 }, \ - { 1, 0, 48000, 8, 96, 8 }, \ - { 1, 0, 54000, 12, 108, 8 } } \ -} +/* B */ +#define ATH5K_RATE_CODE_1M 0x1B +#define ATH5K_RATE_CODE_2M 0x1A +#define ATH5K_RATE_CODE_5_5M 0x19 +#define ATH5K_RATE_CODE_11M 0x18 +/* A and G */ +#define ATH5K_RATE_CODE_6M 0x0B +#define ATH5K_RATE_CODE_9M 0x0F +#define ATH5K_RATE_CODE_12M 0x0A +#define ATH5K_RATE_CODE_18M 0x0E +#define ATH5K_RATE_CODE_24M 0x09 +#define ATH5K_RATE_CODE_36M 0x0D +#define ATH5K_RATE_CODE_48M 0x08 +#define ATH5K_RATE_CODE_54M 0x0C +/* XR */ +#define ATH5K_RATE_CODE_XR_500K 0x07 +#define ATH5K_RATE_CODE_XR_1M 0x02 +#define ATH5K_RATE_CODE_XR_2M 0x06 +#define ATH5K_RATE_CODE_XR_3M 0x01 + +/* adding this flag to rate_code enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 /* * Crypto definitions @@ -735,7 +817,6 @@ struct ath5k_rate_table { return (false); \ } while (0) - enum ath5k_ant_setting { AR5K_ANT_VARIABLE = 0, /* variable by programming */ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ @@ -846,7 +927,8 @@ enum ath5k_power_mode { /* * These match net80211 definitions (not used in - * d80211). + * mac80211). + * TODO: Clean this up */ #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ @@ -862,7 +944,8 @@ enum ath5k_power_mode { /* * Chipset capabilities -see ath5k_hw_get_capability- * get_capability function is not yet fully implemented - * in OpenHAL so most of these don't work yet... + * in ath5k so most of these don't work yet... + * TODO: Implement these & merge with _TUNE_ stuff above */ enum ath5k_capability_type { AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ @@ -931,6 +1014,7 @@ struct ath5k_capabilities { #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 +/* TODO: Clean up and merge with ath5k_softc */ struct ath5k_hw { u32 ah_magic; @@ -939,7 +1023,7 @@ struct ath5k_hw { enum ath5k_int ah_imr; - enum ieee80211_if_types ah_op_mode; + enum nl80211_iftype ah_op_mode; enum ath5k_power_mode ah_power_mode; struct ieee80211_channel ah_current_channel; bool ah_turbo; @@ -1023,11 +1107,13 @@ struct ath5k_hw { /* * Function pointers */ + int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); - int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *, + int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, @@ -1040,33 +1126,38 @@ struct ath5k_hw { * Prototypes */ -/* General Functions */ -extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Attach/Detach Functions */ extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); -extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode); extern void ath5k_hw_detach(struct ath5k_hw *ah); + /* Reset Functions */ -extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel); +extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); +extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel); /* Power management functions */ extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); + /* DMA Related Functions */ -extern void ath5k_hw_start_rx(struct ath5k_hw *ah); +extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); -extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah); -extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr); -extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); +extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); /* Interrupt handling */ extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); -extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask); +extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum +ath5k_int new_mask); extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); + /* EEPROM access functions */ -extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain); +extern int ath5k_eeprom_init(struct ath5k_hw *ah); +extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); + /* Protocol Control Unit Functions */ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); /* BSSID Functions */ @@ -1076,14 +1167,14 @@ extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); /* Receive start/stop functions */ extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah); +extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* RX Filter functions */ extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); -extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index); +extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); -/* Beacon related functions */ +/* Beacon control functions */ extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); @@ -1105,61 +1196,129 @@ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); + /* Queue Control Unit, DFS Control Unit Functions */ -extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); -extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); +extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info); +extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); +extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); + /* Hardware Descriptor Functions */ -extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); +extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); + /* GPIO Functions */ extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); -extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); + /* Misc functions */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); - +extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); /* Initial register settings functions */ extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); + /* Initialize RF */ extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); - - /* PHY/RF channel functions */ extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); -extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); /* Misc PHY functions */ extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); -extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); +/* + * Functions used internaly + */ +/* + * Translate usec to hw clock units + */ +static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) +{ + return turbo ? (usec * 80) : (usec * 40); +} + +/* + * Translate hw clock units to usec + */ +static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) +{ + return turbo ? (clock / 80) : (clock / 40); +} + +/* + * Read from a register + */ static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { return ioread32(ah->ah_iobase + reg); } +/* + * Write to a register + */ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { iowrite32(val, ah->ah_iobase + reg); } +#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) +/* + * Check if a register write has been completed + */ +static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, + u32 val, bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} +#endif + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + #endif diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c new file mode 100644 index 00000000000..51d569883cd --- /dev/null +++ b/drivers/net/wireless/ath5k/attach.c @@ -0,0 +1,359 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* Attach/Detach Functions and helpers * +\*************************************/ + +#include <linux/pci.h> +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/** + * ath5k_hw_post - Power On Self Test helper function + * + * @ah: The &struct ath5k_hw + */ +static int ath5k_hw_post(struct ath5k_hw *ah) +{ + + int i, c; + u16 cur_reg; + u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; + u32 var_pattern; + u32 static_pattern[4] = { + 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999 + }; + u32 init_val; + u32 cur_val; + + for (c = 0; c < 2; c++) { + + cur_reg = regs[c]; + + /* Save previous value */ + init_val = ath5k_hw_reg_read(ah, cur_reg); + + for (i = 0; i < 256; i++) { + var_pattern = i << 16 | i; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x0039080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + for (i = 0; i < 4; i++) { + var_pattern = static_pattern[i]; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x003b080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + + } + + return 0; + +} + +/** + * ath5k_hw_attach - Check if hw is supported and init the needed structs + * + * @sc: The &struct ath5k_softc we got from the driver's attach function + * @mac_version: The mac version id (check out ath5k.h) based on pci id + * + * Check if the device is supported, perform a POST and initialize the needed + * structs. Returns -ENOMEM if we don't have memory for the needed structs, + * -ENODEV if the device is not supported or prints an error msg if something + * else went wrong. + */ +struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) +{ + struct ath5k_hw *ah; + struct pci_dev *pdev = sc->pdev; + u8 mac[ETH_ALEN]; + int ret; + u32 srev; + + /*If we passed the test malloc a ath5k_hw struct*/ + ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); + if (ah == NULL) { + ret = -ENOMEM; + ATH5K_ERR(sc, "out of memory\n"); + goto err; + } + + ah->ah_sc = sc; + ah->ah_iobase = sc->iobase; + + /* + * HW information + */ + ah->ah_op_mode = NL80211_IFTYPE_STATION; + ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; + ah->ah_turbo = false; + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_imr = 0; + ah->ah_atim_window = 0; + ah->ah_aifs = AR5K_TUNE_AIFS; + ah->ah_cw_min = AR5K_TUNE_CWMIN; + ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; + ah->ah_software_retry = false; + ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; + + /* + * Set the mac version based on the pci id + */ + ah->ah_version = mac_version; + + /*Fill the ath5k_hw struct with the needed functions*/ + ret = ath5k_hw_init_desc_functions(ah); + if (ret) + goto err_free; + + /* Bring device out of sleep and reset it's units */ + ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true); + if (ret) + goto err_free; + + /* Get MAC, PHY and RADIO revisions */ + srev = ath5k_hw_reg_read(ah, AR5K_SREV); + ah->ah_mac_srev = srev; + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); + ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & + 0xffffffff; + ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_5GHZ); + ah->ah_phy = AR5K_PHY(0); + + /* Try to identify radio chip based on it's srev */ + switch (ah->ah_radio_5ghz_revision & 0xf0) { + case AR5K_SREV_RAD_5111: + ah->ah_radio = AR5K_RF5111; + ah->ah_single_chip = false; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; + break; + case AR5K_SREV_RAD_5112: + case AR5K_SREV_RAD_2112: + ah->ah_radio = AR5K_RF5112; + ah->ah_single_chip = false; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; + break; + case AR5K_SREV_RAD_2413: + ah->ah_radio = AR5K_RF2413; + ah->ah_single_chip = true; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; + break; + case AR5K_SREV_RAD_5413: + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = true; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + break; + case AR5K_SREV_RAD_2316: + ah->ah_radio = AR5K_RF2316; + ah->ah_single_chip = true; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316; + break; + case AR5K_SREV_RAD_2317: + ah->ah_radio = AR5K_RF2317; + ah->ah_single_chip = true; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317; + break; + case AR5K_SREV_RAD_5424: + if (ah->ah_mac_version == AR5K_SREV_AR2425 || + ah->ah_mac_version == AR5K_SREV_AR2417){ + ah->ah_radio = AR5K_RF2425; + ah->ah_single_chip = true; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; + } else { + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = true; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + } + break; + default: + /* Identify radio based on mac/phy srev */ + if (ah->ah_version == AR5K_AR5210) { + ah->ah_radio = AR5K_RF5110; + ah->ah_single_chip = false; + } else if (ah->ah_version == AR5K_AR5211) { + ah->ah_radio = AR5K_RF5111; + ah->ah_single_chip = false; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) || + ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; + } else if (srev == AR5K_SREV_AR5213A && + ah->ah_phy_revision == AR5K_SREV_PHY_2112B) { + ah->ah_radio = AR5K_RF5112; + ah->ah_single_chip = false; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B; + } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) { + ah->ah_radio = AR5K_RF2316; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316; + } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_5413) { + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2413) { + ah->ah_radio = AR5K_RF2413; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; + } else { + ATH5K_ERR(sc, "Couldn't identify radio revision.\n"); + ret = -ENODEV; + goto err_free; + } + } + + + /* Return on unsuported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_AR5416) && + (srev < AR5K_SREV_AR2425)) { + ATH5K_ERR(sc, "Device not yet supported.\n"); + ret = -ENODEV; + goto err_free; + } + + /* + * Write PCI-E power save settings + */ + if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { + ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES); + /* Shut off RX when elecidle is asserted */ + ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); + /* TODO: EEPROM work */ + ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES); + /* Shut off PLL and CLKREQ active in L1 */ + ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES); + /* Preserce other settings */ + ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES); + /* Reset SERDES to load new settings */ + ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET); + mdelay(1); + } + + /* + * POST + */ + ret = ath5k_hw_post(ah); + if (ret) + goto err_free; + + /* Enable pci core retry fix on Hainan (5213A) and later chips */ + if (srev >= AR5K_SREV_AR5213A) + ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG); + + /* + * Get card capabilities, calibration values etc + * TODO: EEPROM work + */ + ret = ath5k_eeprom_init(ah); + if (ret) { + ATH5K_ERR(sc, "unable to init EEPROM\n"); + goto err_free; + } + + /* Get misc capabilities */ + ret = ath5k_hw_set_capabilities(ah); + if (ret) { + ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + /* Set MAC address */ + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + ath5k_hw_set_lladdr(ah, mac); + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ + memset(ah->ah_bssid, 0xff, ETH_ALEN); + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + ath5k_hw_set_opmode(ah); + + ath5k_hw_set_rfgain_opt(ah); + + return ah; +err_free: + kfree(ah); +err: + return ERR_PTR(ret); +} + +/** + * ath5k_hw_detach - Free the ath5k_hw struct + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_detach(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); + + if (ah->ah_rf_banks != NULL) + kfree(ah->ah_rf_banks); + + /* assume interrupts are down */ + kfree(ah); +} diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 0676c6d8438..9b95c4049b3 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -72,7 +72,7 @@ MODULE_AUTHOR("Nick Kossifidis"); MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards."); MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); -MODULE_VERSION("0.5.0 (EXPERIMENTAL)"); +MODULE_VERSION("0.6.0 (EXPERIMENTAL)"); /* Known PCI ids */ @@ -93,45 +93,94 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = { { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */ { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */ - { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/ + { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */ + { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */ { 0 } }; MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); /* Known SREVs */ static struct ath5k_srev_name srev_names[] = { - { "5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210 }, - { "5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311 }, - { "5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A }, - { "5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B }, - { "5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211 }, - { "5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212 }, - { "5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213 }, - { "5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A }, - { "2413", AR5K_VERSION_VER, AR5K_SREV_VER_AR2413 }, - { "2414", AR5K_VERSION_VER, AR5K_SREV_VER_AR2414 }, - { "2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424 }, - { "5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424 }, - { "5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413 }, - { "5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414 }, - { "5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416 }, - { "5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418 }, - { "2425", AR5K_VERSION_VER, AR5K_SREV_VER_AR2425 }, - { "xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN }, + { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 }, + { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 }, + { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A }, + { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B }, + { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 }, + { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 }, + { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 }, + { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A }, + { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 }, + { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 }, + { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 }, + { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 }, + { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 }, + { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 }, + { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 }, + { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 }, + { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 }, + { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 }, + { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN }, { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, + { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A }, { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 }, { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 }, { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A }, + { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B }, { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 }, { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A }, - { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC0 }, - { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1 }, - { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2 }, + { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B }, + { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 }, + { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 }, + { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, + { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, + { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 }, { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, }; +static struct ieee80211_rate ath5k_rates[] = { + { .bitrate = 10, + .hw_value = ATH5K_RATE_CODE_1M, }, + { .bitrate = 20, + .hw_value = ATH5K_RATE_CODE_2M, + .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = ATH5K_RATE_CODE_5_5M, + .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = ATH5K_RATE_CODE_11M, + .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = ATH5K_RATE_CODE_6M, + .flags = 0 }, + { .bitrate = 90, + .hw_value = ATH5K_RATE_CODE_9M, + .flags = 0 }, + { .bitrate = 120, + .hw_value = ATH5K_RATE_CODE_12M, + .flags = 0 }, + { .bitrate = 180, + .hw_value = ATH5K_RATE_CODE_18M, + .flags = 0 }, + { .bitrate = 240, + .hw_value = ATH5K_RATE_CODE_24M, + .flags = 0 }, + { .bitrate = 360, + .hw_value = ATH5K_RATE_CODE_36M, + .flags = 0 }, + { .bitrate = 480, + .hw_value = ATH5K_RATE_CODE_48M, + .flags = 0 }, + { .bitrate = 540, + .hw_value = ATH5K_RATE_CODE_54M, + .flags = 0 }, + /* XR missing */ +}; + /* * Prototypes - PCI stack related functions */ @@ -162,7 +211,8 @@ static struct pci_driver ath5k_pci_driver = { * Prototypes - MAC 802.11 stack related functions */ static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ieee80211_hw *hw); +static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); +static int ath5k_reset_wake(struct ath5k_softc *sc); static int ath5k_start(struct ieee80211_hw *hw); static void ath5k_stop(struct ieee80211_hw *hw); static int ath5k_add_interface(struct ieee80211_hw *hw, @@ -218,20 +268,16 @@ static void ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw); /* Channel/mode setup */ static inline short ath5k_ieee2mhz(short chan); -static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates, - const struct ath5k_rate_table *rt, - unsigned int max); static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, unsigned int mode, unsigned int max); -static int ath5k_getchannels(struct ieee80211_hw *hw); +static int ath5k_setup_bands(struct ieee80211_hw *hw); static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan); static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode); static void ath5k_mode_setup(struct ath5k_softc *sc); -static void ath5k_set_total_hw_rates(struct ath5k_softc *sc); /* Descriptor setup */ static int ath5k_desc_alloc(struct ath5k_softc *sc, @@ -351,7 +397,11 @@ ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) for (i = 0; i < ARRAY_SIZE(srev_names); i++) { if (srev_names[i].sr_type != type) continue; - if ((val & 0xff) < srev_names[i + 1].sr_val) { + + if ((val & 0xf0) == srev_names[i].sr_val) + name = srev_names[i].sr_name; + + if ((val & 0xff) == srev_names[i].sr_val) { name = srev_names[i].sr_name; break; } @@ -446,6 +496,12 @@ ath5k_pci_probe(struct pci_dev *pdev, hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + hw->extra_tx_headroom = 2; hw->channel_change_time = 5000; sc = hw->priv; @@ -462,7 +518,7 @@ ath5k_pci_probe(struct pci_dev *pdev, sc->iobase = mem; /* So we can unmap it on detach */ sc->cachelsz = csz * sizeof(u32); /* convert to bytes */ - sc->opmode = IEEE80211_IF_TYPE_STA; + sc->opmode = NL80211_IFTYPE_STATION; mutex_init(&sc->lock); spin_lock_init(&sc->rxbuflock); spin_lock_init(&sc->txbuflock); @@ -485,13 +541,19 @@ ath5k_pci_probe(struct pci_dev *pdev, goto err_irq; } + /* set up multi-rate retry capabilities */ + if (sc->ah->ah_version == AR5K_AR5212) { + hw->max_altrates = 3; + hw->max_altrate_tries = 11; + } + /* Finish private driver data initialization */ ret = ath5k_attach(pdev, hw); if (ret) goto err_ah; ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", - ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev), + ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), sc->ah->ah_mac_srev, sc->ah->ah_phy_revision); @@ -646,7 +708,6 @@ err_no_irq: #endif /* CONFIG_PM */ - /***********************\ * Driver Initialization * \***********************/ @@ -669,7 +730,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) * return false w/o doing anything. MAC's that do * support it will return true w/o doing anything. */ - ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); + ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); if (ret < 0) goto err; if (ret > 0) @@ -688,15 +749,12 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) * on settings like the phy mode and regulatory * domain restrictions. */ - ret = ath5k_getchannels(hw); + ret = ath5k_setup_bands(hw); if (ret) { ATH5K_ERR(sc, "can't get channels\n"); goto err; } - /* Set *_rates so we can map hw rate index */ - ath5k_set_total_hw_rates(sc); - /* NB: setup here so ath5k_rate_update is happy */ if (test_bit(AR5K_MODE_11A, ah->ah_modes)) ath5k_setcurmode(sc, AR5K_MODE_11A); @@ -813,27 +871,6 @@ ath5k_ieee2mhz(short chan) } static unsigned int -ath5k_copy_rates(struct ieee80211_rate *rates, - const struct ath5k_rate_table *rt, - unsigned int max) -{ - unsigned int i, count; - - if (rt == NULL) - return 0; - - for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) { - rates[count].bitrate = rt->rates[i].rate_kbps / 100; - rates[count].hw_value = rt->rates[i].rate_code; - rates[count].flags = rt->rates[i].modulation; - count++; - max--; - } - - return count; -} - -static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, unsigned int mode, @@ -895,74 +932,97 @@ ath5k_copy_channels(struct ath5k_hw *ah, return count; } +static void +ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b) +{ + u8 i; + + for (i = 0; i < AR5K_MAX_RATES; i++) + sc->rate_idx[b->band][i] = -1; + + for (i = 0; i < b->n_bitrates; i++) { + sc->rate_idx[b->band][b->bitrates[i].hw_value] = i; + if (b->bitrates[i].hw_value_short) + sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; + } +} + static int -ath5k_getchannels(struct ieee80211_hw *hw) +ath5k_setup_bands(struct ieee80211_hw *hw) { struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; - struct ieee80211_supported_band *sbands = sc->sbands; - const struct ath5k_rate_table *hw_rates; - unsigned int max_r, max_c, count_r, count_c; - int mode2g = AR5K_MODE_11G; + struct ieee80211_supported_band *sband; + int max_c, count_c = 0; + int i; BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); - - max_r = ARRAY_SIZE(sc->rates); max_c = ARRAY_SIZE(sc->channels); - count_r = count_c = 0; /* 2GHz band */ - if (!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { - mode2g = AR5K_MODE_11B; - if (!test_bit(AR5K_MODE_11B, - sc->ah->ah_capabilities.cap_mode)) - mode2g = -1; - } + sband = &sc->sbands[IEEE80211_BAND_2GHZ]; + sband->band = IEEE80211_BAND_2GHZ; + sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0]; - if (mode2g > 0) { - struct ieee80211_supported_band *sband = - &sbands[IEEE80211_BAND_2GHZ]; + if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { + /* G mode */ + memcpy(sband->bitrates, &ath5k_rates[0], + sizeof(struct ieee80211_rate) * 12); + sband->n_bitrates = 12; - sband->bitrates = sc->rates; sband->channels = sc->channels; - - sband->band = IEEE80211_BAND_2GHZ; sband->n_channels = ath5k_copy_channels(ah, sband->channels, - mode2g, max_c); - - hw_rates = ath5k_hw_get_rate_table(ah, mode2g); - sband->n_bitrates = ath5k_copy_rates(sband->bitrates, - hw_rates, max_r); + AR5K_MODE_11G, max_c); + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; count_c = sband->n_channels; - count_r = sband->n_bitrates; + max_c -= count_c; + } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { + /* B mode */ + memcpy(sband->bitrates, &ath5k_rates[0], + sizeof(struct ieee80211_rate) * 4); + sband->n_bitrates = 4; + + /* 5211 only supports B rates and uses 4bit rate codes + * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B) + * fix them up here: + */ + if (ah->ah_version == AR5K_AR5211) { + for (i = 0; i < 4; i++) { + sband->bitrates[i].hw_value = + sband->bitrates[i].hw_value & 0xF; + sband->bitrates[i].hw_value_short = + sband->bitrates[i].hw_value_short & 0xF; + } + } - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; + sband->channels = sc->channels; + sband->n_channels = ath5k_copy_channels(ah, sband->channels, + AR5K_MODE_11B, max_c); - max_r -= count_r; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; + count_c = sband->n_channels; max_c -= count_c; - } + ath5k_setup_rate_idx(sc, sband); - /* 5GHz band */ - + /* 5GHz band, A mode */ if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) { - struct ieee80211_supported_band *sband = - &sbands[IEEE80211_BAND_5GHZ]; + sband = &sc->sbands[IEEE80211_BAND_5GHZ]; + sband->band = IEEE80211_BAND_5GHZ; + sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0]; - sband->bitrates = &sc->rates[count_r]; - sband->channels = &sc->channels[count_c]; + memcpy(sband->bitrates, &ath5k_rates[4], + sizeof(struct ieee80211_rate) * 8); + sband->n_bitrates = 8; - sband->band = IEEE80211_BAND_5GHZ; + sband->channels = &sc->channels[count_c]; sband->n_channels = ath5k_copy_channels(ah, sband->channels, AR5K_MODE_11A, max_c); - hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A); - sband->n_bitrates = ath5k_copy_rates(sband->bitrates, - hw_rates, max_r); - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; } + ath5k_setup_rate_idx(sc, sband); ath5k_debug_dump_bands(sc); @@ -978,9 +1038,6 @@ ath5k_getchannels(struct ieee80211_hw *hw) static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) { - struct ath5k_hw *ah = sc->ah; - int ret; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n", sc->curchan->center_freq, chan->center_freq); @@ -996,41 +1053,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - ath5k_hw_set_intr(ah, 0); /* disable interrupts */ - ath5k_txq_cleanup(sc); /* clear pending tx frames */ - ath5k_rx_stop(sc); /* turn off frame recv */ - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (ret) { - ATH5K_ERR(sc, "%s: unable to reset channel " - "(%u Mhz)\n", __func__, chan->center_freq); - return ret; - } - - ath5k_hw_set_txpower_limit(sc->ah, 0); - - /* - * Re-enable rx framework. - */ - ret = ath5k_rx_start(sc); - if (ret) { - ATH5K_ERR(sc, "%s: unable to restart recv logic\n", - __func__); - return ret; - } - - /* - * Change channels and update the h/w rate map - * if we're switching; e.g. 11a to 11b/g. - * - * XXX needed? - */ -/* ath5k_chan_change(sc, chan); */ - - ath5k_beacon_config(sc); - /* - * Re-enable interrupts. - */ - ath5k_hw_set_intr(ah, sc->imask); + return ath5k_reset(sc, true, true); } return 0; @@ -1068,75 +1091,13 @@ ath5k_mode_setup(struct ath5k_softc *sc) ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } -/* - * Match the hw provided rate index (through descriptors) - * to an index for sc->curband->bitrates, so it can be used - * by the stack. - * - * This one is a little bit tricky but i think i'm right - * about this... - * - * We have 4 rate tables in the following order: - * XR (4 rates) - * 802.11a (8 rates) - * 802.11b (4 rates) - * 802.11g (12 rates) - * that make the hw rate table. - * - * Lets take a 5211 for example that supports a and b modes only. - * First comes the 802.11a table and then 802.11b (total 12 rates). - * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit), - * if it returns 2 it points to the second 802.11a rate etc. - * - * Same goes for 5212 who has xr/a/b/g support (total 28 rates). - * First comes the XR table, then 802.11a, 802.11b and 802.11g. - * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc - */ -static void -ath5k_set_total_hw_rates(struct ath5k_softc *sc) { - - struct ath5k_hw *ah = sc->ah; - - if (test_bit(AR5K_MODE_11A, ah->ah_modes)) - sc->a_rates = 8; - - if (test_bit(AR5K_MODE_11B, ah->ah_modes)) - sc->b_rates = 4; - - if (test_bit(AR5K_MODE_11G, ah->ah_modes)) - sc->g_rates = 12; - - /* XXX: Need to see what what happens when - xr disable bits in eeprom are set */ - if (ah->ah_version >= AR5K_AR5212) - sc->xr_rates = 4; - -} - static inline int -ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) { - - int mac80211_rix; - - if(sc->curband->band == IEEE80211_BAND_2GHZ) { - /* We setup a g ratetable for both b/g modes */ - mac80211_rix = - hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates; - } else { - mac80211_rix = hw_rix - sc->xr_rates; - } - - /* Something went wrong, fallback to basic rate for this band */ - if ((mac80211_rix >= sc->curband->n_bitrates) || - (mac80211_rix <= 0 )) - mac80211_rix = 1; - - return mac80211_rix; +ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) +{ + WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES); + return sc->rate_idx[sc->curband->band][hw_rix]; } - - - /***************\ * Buffers setup * \***************/ @@ -1199,7 +1160,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ds = bf->desc; ds->ds_link = bf->daddr; /* link to self */ ds->ds_data = bf->skbaddr; - ath5k_hw_setup_rx_desc(ah, ds, + ah->ah_setup_rx_desc(ah, ds, skb_tailroom(skb), /* buffer size */ 0); @@ -1218,7 +1179,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) struct sk_buff *skb = bf->skb; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID; - int ret; + struct ieee80211_rate *rate; + unsigned int mrr_rate[3], mrr_tries[3]; + int i, ret; flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; @@ -1233,7 +1196,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) if (info->control.hw_key) { keyidx = info->control.hw_key->hw_key_idx; - pktlen += info->control.icv_len; + pktlen += info->control.hw_key->icv_len; } ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, @@ -1243,6 +1206,22 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) if (ret) goto err_unmap; + memset(mrr_rate, 0, sizeof(mrr_rate)); + memset(mrr_tries, 0, sizeof(mrr_tries)); + for (i = 0; i < 3; i++) { + rate = ieee80211_get_alt_retry_rate(sc->hw, info, i); + if (!rate) + break; + + mrr_rate[i] = rate->hw_value; + mrr_tries[i] = info->control.retries[i].limit; + } + + ah->ah_setup_mrr_tx_desc(ah, ds, + mrr_rate[0], mrr_tries[0], + mrr_rate[1], mrr_tries[1], + mrr_rate[2], mrr_tries[2]); + ds->ds_link = 0; ds->ds_data = bf->skbaddr; @@ -1250,12 +1229,12 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) list_add_tail(&bf->list, &txq->q); sc->tx_stats[txq->qnum].len++; if (txq->link == NULL) /* is this first packet? */ - ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr); + ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); else /* no, so only link it */ *txq->link = bf->daddr; txq->link = &ds->ds_link; - ath5k_hw_tx_start(ah, txq->qnum); + ath5k_hw_start_tx_dma(ah, txq->qnum); mmiowb(); spin_unlock_bh(&txq->lock); @@ -1433,7 +1412,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc) ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi); if (ret) return ret; - if (sc->opmode == IEEE80211_IF_TYPE_AP) { + if (sc->opmode == NL80211_IFTYPE_AP || + sc->opmode == NL80211_IFTYPE_MESH_POINT) { /* * Always burst out beacon and CAB traffic * (aifs = cwmin = cwmax = 0) @@ -1441,7 +1421,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) qi.tqi_aifs = 0; qi.tqi_cw_min = 0; qi.tqi_cw_max = 0; - } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) { + } else if (sc->opmode == NL80211_IFTYPE_ADHOC) { /* * Adhoc mode; backoff between 0 and (2 * cw_min). */ @@ -1454,7 +1434,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n", qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max); - ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi); + ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi); if (ret) { ATH5K_ERR(sc, "%s: unable to update parameters for beacon " "hardware queue!\n", __func__); @@ -1503,14 +1483,14 @@ ath5k_txq_cleanup(struct ath5k_softc *sc) /* don't touch the hardware if marked invalid */ ath5k_hw_stop_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n", - ath5k_hw_get_tx_buf(ah, sc->bhalq)); + ath5k_hw_get_txdp(ah, sc->bhalq)); for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) if (sc->txqs[i].setup) { ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, " "link %p\n", sc->txqs[i].qnum, - ath5k_hw_get_tx_buf(ah, + ath5k_hw_get_txdp(ah, sc->txqs[i].qnum), sc->txqs[i].link); } @@ -1570,8 +1550,8 @@ ath5k_rx_start(struct ath5k_softc *sc) bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); spin_unlock_bh(&sc->rxbuflock); - ath5k_hw_put_rx_buf(ah, bf->daddr); - ath5k_hw_start_rx(ah); /* enable recv descriptors */ + ath5k_hw_set_rxdp(ah, bf->daddr); + ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ ath5k_mode_setup(sc); /* set filters, etc. */ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ @@ -1588,7 +1568,7 @@ ath5k_rx_stop(struct ath5k_softc *sc) { struct ath5k_hw *ah = sc->ah; - ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ + ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ @@ -1602,7 +1582,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, struct sk_buff *skb, struct ath5k_rx_status *rs) { struct ieee80211_hdr *hdr = (void *)skb->data; - unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb); + unsigned int keyix, hlen; if (!(rs->rs_status & AR5K_RXERR_DECRYPT) && rs->rs_keyix != AR5K_RXKEYIX_INVALID) @@ -1611,6 +1591,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, /* Apparently when a default key is used to decrypt the packet the hw does not set the index used to decrypt. In such cases get the index from the packet. */ + hlen = ieee80211_hdrlen(hdr->frame_control); if (ieee80211_has_protected(hdr->frame_control) && !(rs->rs_status & AR5K_RXERR_DECRYPT) && skb->len >= hlen + 4) { @@ -1768,7 +1749,7 @@ ath5k_tasklet_rx(unsigned long data) /* let crypto-error packets fall through in MNTR */ if ((rs.rs_status & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) || - sc->opmode != IEEE80211_IF_TYPE_MNTR) + sc->opmode != NL80211_IFTYPE_MONITOR) goto next; } accept: @@ -1824,10 +1805,14 @@ accept: rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); + if (rxs.rate_idx >= 0 && rs.rs_rate == + sc->curband->bitrates[rxs.rate_idx].hw_value_short) + rxs.flag |= RX_FLAG_SHORTPRE; + ath5k_debug_dump_skb(sc, skb, "RX ", 0); /* check beacons in IBSS mode */ - if (sc->opmode == IEEE80211_IF_TYPE_IBSS) + if (sc->opmode == NL80211_IFTYPE_ADHOC) ath5k_check_ibss_tsf(sc, skb, &rxs); __ieee80211_rx(sc->hw, skb, &rxs); @@ -1853,7 +1838,7 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) struct ath5k_desc *ds; struct sk_buff *skb; struct ieee80211_tx_info *info; - int ret; + int i, ret; spin_lock(&txq->lock); list_for_each_entry_safe(bf, bf0, &txq->q, list) { @@ -1875,7 +1860,25 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); - info->status.retry_count = ts.ts_shortretry + ts.ts_longretry / 6; + memset(&info->status, 0, sizeof(info->status)); + info->tx_rate_idx = ath5k_hw_to_driver_rix(sc, + ts.ts_rate[ts.ts_final_idx]); + info->status.retry_count = ts.ts_longretry; + + for (i = 0; i < 4; i++) { + struct ieee80211_tx_altrate *r = + &info->status.retries[i]; + + if (ts.ts_rate[i]) { + r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); + r->limit = ts.ts_retry[i]; + } else { + r->rate_idx = -1; + r->limit = 0; + } + } + + info->status.excessive_retries = 0; if (unlikely(ts.ts_status)) { sc->ll_stats.dot11ACKFailureCount++; if (ts.ts_status & AR5K_TXERR_XRETRY) @@ -1942,7 +1945,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ds = bf->desc; flags = AR5K_TXDESC_NOACK; - if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) { + if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) { ds->ds_link = bf->daddr; /* self-linked */ flags |= AR5K_TXDESC_VEOL; /* @@ -1991,8 +1994,8 @@ ath5k_beacon_send(struct ath5k_softc *sc) ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n"); - if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA || - sc->opmode == IEEE80211_IF_TYPE_MNTR)) { + if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || + sc->opmode == NL80211_IFTYPE_MONITOR)) { ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); return; } @@ -2032,8 +2035,8 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* NB: hw still stops DMA, so proceed */ } - ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); - ath5k_hw_tx_start(ah, sc->bhalq); + ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); + ath5k_hw_start_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", sc->bhalq, (unsigned long long)bf->daddr, bf->desc); @@ -2162,13 +2165,13 @@ ath5k_beacon_config(struct ath5k_softc *sc) { struct ath5k_hw *ah = sc->ah; - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); sc->bmisscount = 0; sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); - if (sc->opmode == IEEE80211_IF_TYPE_STA) { + if (sc->opmode == NL80211_IFTYPE_STATION) { sc->imask |= AR5K_INT_BMISS; - } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) { + } else if (sc->opmode == NL80211_IFTYPE_ADHOC) { /* * In IBSS mode we use a self-linked tx descriptor and let the * hardware send the beacons automatically. We have to load it @@ -2188,7 +2191,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) } /* TODO else AP */ - ath5k_hw_set_intr(ah, sc->imask); + ath5k_hw_set_imr(ah, sc->imask); } @@ -2220,36 +2223,13 @@ ath5k_init(struct ath5k_softc *sc) */ sc->curchan = sc->hw->conf.channel; sc->curband = &sc->sbands[sc->curchan->band]; - ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false); - if (ret) { - ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret); - goto done; - } - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath5k_hw_set_txpower_limit(sc->ah, 0); - - /* - * Setup the hardware after reset: the key cache - * is filled as needed and the receive engine is - * set going. Frame transmit is handled entirely - * in the frame output path; there's nothing to do - * here except setup the interrupt mask. - */ - ret = ath5k_rx_start(sc); - if (ret) - goto done; - - /* - * Enable interrupts. - */ sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + ret = ath5k_reset(sc, false, false); + if (ret) + goto done; - ath5k_hw_set_intr(sc->ah, sc->imask); /* Set ack to be sent at low bit-rates */ ath5k_hw_set_ack_bitrate_high(sc->ah, false); @@ -2290,7 +2270,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) if (!test_bit(ATH_STAT_INVALID, sc->status)) { ath5k_led_off(sc); - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); synchronize_irq(sc->pdev->irq); } ath5k_txq_cleanup(sc); @@ -2396,7 +2376,7 @@ ath5k_intr(int irq, void *dev_id) * transmission time) in order to detect wether * automatic TSF updates happened. */ - if (sc->opmode == IEEE80211_IF_TYPE_IBSS) { + if (sc->opmode == NL80211_IFTYPE_ADHOC) { /* XXX: only if VEOL suppported */ u64 tsf = ath5k_hw_get_tsf64(ah); sc->nexttbtt += sc->bintval; @@ -2451,7 +2431,7 @@ ath5k_tasklet_reset(unsigned long data) { struct ath5k_softc *sc = (void *)data; - ath5k_reset(sc->hw); + ath5k_reset_wake(sc); } /* @@ -2474,7 +2454,7 @@ ath5k_calibrate(unsigned long data) * to load new gain values. */ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ath5k_reset(sc->hw); + ath5k_reset_wake(sc); } if (ath5k_hw_phy_calibrate(ah, sc->curchan)) ATH5K_ERR(sc, "calibration of channel %u failed\n", @@ -2626,7 +2606,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ath5k_debug_dump_skb(sc, skb, "TX ", 1); - if (sc->opmode == IEEE80211_IF_TYPE_MNTR) + if (sc->opmode == NL80211_IFTYPE_MONITOR) ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n"); /* @@ -2675,48 +2655,67 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } static int -ath5k_reset(struct ieee80211_hw *hw) +ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) { - struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - ath5k_hw_set_intr(ah, 0); - ath5k_txq_cleanup(sc); - ath5k_rx_stop(sc); - + if (stop) { + ath5k_hw_set_imr(ah, 0); + ath5k_txq_cleanup(sc); + ath5k_rx_stop(sc); + } ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (unlikely(ret)) { + if (ret) { ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); goto err; } + + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ ath5k_hw_set_txpower_limit(sc->ah, 0); ret = ath5k_rx_start(sc); - if (unlikely(ret)) { + if (ret) { ATH5K_ERR(sc, "can't start recv logic\n"); goto err; } + /* - * We may be doing a reset in response to an ioctl - * that changes the channel so update any state that - * might change as a result. + * Change channels and update the h/w rate map if we're switching; + * e.g. 11a to 11b/g. + * + * We may be doing a reset in response to an ioctl that changes the + * channel so update any state that might change as a result. * * XXX needed? */ /* ath5k_chan_change(sc, c); */ - ath5k_beacon_config(sc); - /* intrs are started by ath5k_beacon_config */ - ieee80211_wake_queues(hw); + ath5k_beacon_config(sc); + /* intrs are enabled by ath5k_beacon_config */ return 0; err: return ret; } +static int +ath5k_reset_wake(struct ath5k_softc *sc) +{ + int ret; + + ret = ath5k_reset(sc, true, true); + if (!ret) + ieee80211_wake_queues(sc->hw); + + return ret; +} + static int ath5k_start(struct ieee80211_hw *hw) { return ath5k_init(hw->priv); @@ -2742,9 +2741,9 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, sc->vif = conf->vif; switch (conf->type) { - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: - case IEEE80211_IF_TYPE_MNTR: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MONITOR: sc->opmode = conf->type; break; default: @@ -2815,7 +2814,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } if (conf->changed & IEEE80211_IFCC_BEACON && - vif->type == IEEE80211_IF_TYPE_IBSS) { + vif->type == NL80211_IFTYPE_ADHOC) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); if (!beacon) { ret = -ENOMEM; @@ -2827,7 +2826,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, mutex_unlock(&sc->lock); - return ath5k_reset(hw); + return ath5k_reset_wake(sc); unlock: mutex_unlock(&sc->lock); return ret; @@ -2934,16 +2933,17 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */ - if (sc->opmode == IEEE80211_IF_TYPE_MNTR) + if (sc->opmode == NL80211_IFTYPE_MONITOR) rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM; - if (sc->opmode != IEEE80211_IF_TYPE_STA) + if (sc->opmode != NL80211_IFTYPE_STATION) rfilt |= AR5K_RX_FILTER_PROBEREQ; - if (sc->opmode != IEEE80211_IF_TYPE_AP && + if (sc->opmode != NL80211_IFTYPE_AP && + sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == IEEE80211_IF_TYPE_STA || - sc->opmode == IEEE80211_IF_TYPE_IBSS) { + if (sc->opmode == NL80211_IFTYPE_STATION || + sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; } @@ -3048,7 +3048,7 @@ ath5k_reset_tsf(struct ieee80211_hw *hw) * in IBSS mode we need to update the beacon timers too. * this will also reset the TSF if we call it with 0 */ - if (sc->opmode == IEEE80211_IF_TYPE_IBSS) + if (sc->opmode == NL80211_IFTYPE_ADHOC) ath5k_beacon_update_timers(sc, 0); else ath5k_hw_reset_tsf(sc->ah); @@ -3063,7 +3063,7 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ath5k_debug_dump_skb(sc, skb, "BC ", 1); - if (sc->opmode != IEEE80211_IF_TYPE_IBSS) { + if (sc->opmode != NL80211_IFTYPE_ADHOC) { ret = -EIO; goto end; } diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 7ec2f377d5c..9d0b728928e 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -111,17 +111,13 @@ struct ath5k_softc { struct ieee80211_hw *hw; /* IEEE 802.11 common */ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; struct ieee80211_channel channels[ATH_CHAN_MAX]; - struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS]; - enum ieee80211_if_types opmode; + struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + enum nl80211_iftype opmode; struct ath5k_hw *ah; /* Atheros HW */ struct ieee80211_supported_band *curband; - u8 a_rates; - u8 b_rates; - u8 g_rates; - u8 xr_rates; - #ifdef CONFIG_ATH5K_DEBUG struct ath5k_dbg_info debug; /* debug info */ #endif /* CONFIG_ATH5K_DEBUG */ diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath5k/caps.c new file mode 100644 index 00000000000..150f5ed204a --- /dev/null +++ b/drivers/net/wireless/ath5k/caps.c @@ -0,0 +1,193 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/**************\ +* Capabilities * +\**************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Fill the capabilities struct + * TODO: Merge this with EEPROM code when we are done with it + */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah) +{ + u16 ee_header; + + ATH5K_TRACE(ah->ah_sc); + /* Capabilities stored in the EEPROM */ + ee_header = ah->ah_capabilities.cap_eeprom.ee_header; + + if (ah->ah_version == AR5K_AR5210) { + /* + * Set radio capabilities + * (The AR5110 only supports the middle 5GHz band) + */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5120; + ah->ah_capabilities.cap_range.range_5ghz_max = 5430; + ah->ah_capabilities.cap_range.range_2ghz_min = 0; + ah->ah_capabilities.cap_range.range_2ghz_max = 0; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); + } else { + /* + * XXX The tranceiver supports frequencies from 4920 to 6100GHz + * XXX and from 2312 to 2732GHz. There are problems with the + * XXX current ieee80211 implementation because the IEEE + * XXX channel mapping does not support negative channel + * XXX numbers (2312MHz is channel -19). Of course, this + * XXX doesn't matter because these channels are out of range + * XXX but some regulation domains like MKK (Japan) will + * XXX support frequencies somewhere around 4.8GHz. + */ + + /* + * Set radio capabilities + */ + + if (AR5K_EEPROM_HDR_11A(ee_header)) { + /* 4920 */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5005; + ah->ah_capabilities.cap_range.range_5ghz_max = 6100; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, + ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, + ah->ah_capabilities.cap_mode); + if (ah->ah_version == AR5K_AR5212) + __set_bit(AR5K_MODE_11G_TURBO, + ah->ah_capabilities.cap_mode); + } + + /* Enable 802.11b if a 2GHz capable radio (2111/5112) is + * connected */ + if (AR5K_EEPROM_HDR_11B(ee_header) || + AR5K_EEPROM_HDR_11G(ee_header)) { + /* 2312 */ + ah->ah_capabilities.cap_range.range_2ghz_min = 2412; + ah->ah_capabilities.cap_range.range_2ghz_max = 2732; + + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(AR5K_MODE_11B, + ah->ah_capabilities.cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header)) + __set_bit(AR5K_MODE_11G, + ah->ah_capabilities.cap_mode); + } + } + + /* GPIO */ + ah->ah_gpio_npins = AR5K_NUM_GPIO; + + /* Set number of supported TX queues */ + if (ah->ah_version == AR5K_AR5210) + ah->ah_capabilities.cap_queues.q_tx_num = + AR5K_NUM_TX_QUEUES_NOQCU; + else + ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; + + return 0; +} + +/* Main function used by the driver part to check caps */ +int ath5k_hw_get_capability(struct ath5k_hw *ah, + enum ath5k_capability_type cap_type, + u32 capability, u32 *result) +{ + ATH5K_TRACE(ah->ah_sc); + + switch (cap_type) { + case AR5K_CAP_NUM_TXQUEUES: + if (result) { + if (ah->ah_version == AR5K_AR5210) + *result = AR5K_NUM_TX_QUEUES_NOQCU; + else + *result = AR5K_NUM_TX_QUEUES; + goto yes; + } + case AR5K_CAP_VEOL: + goto yes; + case AR5K_CAP_COMPRESSION: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_BURST: + goto yes; + case AR5K_CAP_TPC: + goto yes; + case AR5K_CAP_BSSIDMASK: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_XR: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + default: + goto no; + } + +no: + return -EINVAL; +yes: + return 0; +} + +/* + * TODO: Following functions should be part of a new function + * set_capability + */ + +int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, + u16 assoc_id) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} + +int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 6fa6c8e04ff..8f92d670f61 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -58,8 +58,8 @@ * THE POSSIBILITY OF SUCH DAMAGES. */ -#include "debug.h" #include "base.h" +#include "debug.h" static unsigned int ath5k_debug; module_param_named(debug, ath5k_debug, uint, 0); @@ -525,7 +525,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) return; printk(KERN_DEBUG "rx queue %x, link %p\n", - ath5k_hw_get_rx_buf(ah), sc->rxlink); + ath5k_hw_get_rxdp(ah), sc->rxlink); spin_lock_bh(&sc->rxbuflock); list_for_each_entry(bf, &sc->rxbuf, list) { diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c new file mode 100644 index 00000000000..dd1374052ba --- /dev/null +++ b/drivers/net/wireless/ath5k/desc.c @@ -0,0 +1,692 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/******************************\ + Hardware Descriptor Functions +\******************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * TX Descriptors + */ + +/* + * Initialize the 2-word tx control descriptor on 5210/5211 + */ +static int +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, + unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) +{ + u32 frame_type; + struct ath5k_hw_2w_tx_ctl *tx_ctl; + unsigned int frame_len; + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; + + if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; + + /* + * Verify and set header length + * XXX: I only found that on 5210 code, does it work on 5211 ? + */ + if (ah->ah_version == AR5K_AR5210) { + if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) + return -EINVAL; + tx_ctl->tx_control_0 |= + AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); + } + + /*Diferences between 5210-5211*/ + if (ah->ah_version == AR5K_AR5210) { + switch (type) { + case AR5K_PKT_TYPE_BEACON: + case AR5K_PKT_TYPE_PROBE_RESP: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + case AR5K_PKT_TYPE_PIFS: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + default: + frame_type = type /*<< 2 ?*/; + } + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + } else { + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | + AR5K_REG_SM(antenna_mode, + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= + AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); + } +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= + AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= + AR5K_REG_SM(key_index, + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS Duration [5210 ?] + */ + if ((ah->ah_version == AR5K_AR5210) && + (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) + tx_ctl->tx_control_1 |= rtscts_duration & + AR5K_2W_TX_DESC_CTL1_RTS_DURATION; + + return 0; +} + +/* + * Initialize the 4-word tx control descriptor on 5212 + */ +static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, + enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, + unsigned int tx_tries0, unsigned int key_index, + unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, + unsigned int rtscts_duration) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + unsigned int frame_len; + + ATH5K_TRACE(ah->ah_sc); + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; + + if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= AR5K_REG_SM(type, + AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(0, CTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, + AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS + */ + if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { + if ((flags & AR5K_TXDESC_RTSENA) && + (flags & AR5K_TXDESC_CTSENA)) + return -EINVAL; + tx_ctl->tx_control_2 |= rtscts_duration & + AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, + AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); + } + + return 0; +} + +/* + * Initialize a 4-word multi rate retry tx control descriptor on 5212 + */ +static int +ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, + u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + + /* + * Rates can be 0 as long as the retry count is 0 too. + * A zero rate and nonzero retry count will put the HW into a mode where + * it continously sends noise on the channel, so it is important to + * avoid this. + */ + if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || + (tx_rate2 == 0 && tx_tries2 != 0) || + (tx_rate3 == 0 && tx_tries3 != 0))) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + if (ah->ah_version == AR5K_AR5212) { + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + +#define _XTX_TRIES(_n) \ + if (tx_tries##_n) { \ + tx_ctl->tx_control_2 |= \ + AR5K_REG_SM(tx_tries##_n, \ + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ + tx_ctl->tx_control_3 |= \ + AR5K_REG_SM(tx_rate##_n, \ + AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ + } + + _XTX_TRIES(1); + _XTX_TRIES(2); + _XTX_TRIES(3); + +#undef _XTX_TRIES + + return 1; + } + + return 0; +} + +/* no mrr support for cards older than 5212 */ +static int +ath5k_hw_setup_no_mrr(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, + u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) +{ + return 0; +} + +/* + * Proccess the tx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_2w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + ATH5K_TRACE(ah->ah_sc); + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + tx_status = &desc->ud.ds_tx5210.tx_stat; + + /* No frame has been send or error */ + if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + /*TODO: ts->ts_virtcol + test*/ + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = 1; + ts->ts_status = 0; + ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0, + AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + ts->ts_retry[0] = ts->ts_longretry; + ts->ts_final_idx = 0; + + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * Proccess a tx status descriptor on 5212 + */ +static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + ATH5K_TRACE(ah->ah_sc); + + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + tx_status = &desc->ud.ds_tx5212.tx_stat; + + /* No frame has been send or error */ + if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = (tx_status->tx_status_1 & + AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; + ts->ts_status = 0; + + ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX); + + /* The longretry counter has the number of un-acked retries + * for the final rate. To get the total number of retries + * we have to add the retry counters for the other rates + * as well + */ + ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry; + switch (ts->ts_final_idx) { + case 3: + ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); + + ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); + ts->ts_longretry += ts->ts_retry[2]; + /* fall through */ + case 2: + ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); + + ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); + ts->ts_longretry += ts->ts_retry[1]; + /* fall through */ + case 1: + ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); + + ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); + ts->ts_longretry += ts->ts_retry[0]; + /* fall through */ + case 0: + ts->ts_rate[0] = tx_ctl->tx_control_3 & + AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + break; + } + + /* TX error */ + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * RX Descriptors + */ + +/* + * Initialize an rx control descriptor + */ +static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags) +{ + struct ath5k_hw_rx_ctl *rx_ctl; + + ATH5K_TRACE(ah->ah_sc); + rx_ctl = &desc->ud.ds_rx.rx_ctl; + + /* + * Clear the descriptor + * If we don't clean the status descriptor, + * while scanning we get too many results, + * most of them virtual, after some secs + * of scanning system hangs. M.F. + */ + memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); + + /* Setup descriptor */ + rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; + if (unlikely(rx_ctl->rx_control_1 != size)) + return -EINVAL; + + if (flags & AR5K_RXDESC_INTREQ) + rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; + + return 0; +} + +/* + * Proccess the rx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; + rs->rs_more = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE; + /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) + rs->rs_status |= AR5K_RXERR_FIFO; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); + } + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + } + + return 0; +} + +/* + * Proccess the rx status descriptor on 5212 + */ +static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + struct ath5k_hw_rx_error *rx_err; + + ATH5K_TRACE(ah->ah_sc); + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* Overlay on error */ + rx_err = &desc->ud.ds_rx.u.rx_err; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; + rs->rs_more = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE; + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, + AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); + } + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) + rs->rs_status |= AR5K_RXERR_MIC; + } + + return 0; +} + +/* + * Init function pointers inside ath5k_hw struct + */ +int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +{ + + if (ah->ah_version != AR5K_AR5210 && + ah->ah_version != AR5K_AR5211 && + ah->ah_version != AR5K_AR5212) + return -ENOTSUPP; + + /* XXX: What is this magic value and where is it used ? */ + if (ah->ah_version == AR5K_AR5212) + ah->ah_magic = AR5K_EEPROM_MAGIC_5212; + else if (ah->ah_version == AR5K_AR5211) + ah->ah_magic = AR5K_EEPROM_MAGIC_5211; + + if (ah->ah_version == AR5K_AR5212) { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; + ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; + } else { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; + ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_no_mrr; + ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; + } + + if (ah->ah_version == AR5K_AR5212) + ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; + else if (ah->ah_version <= AR5K_AR5211) + ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/desc.h index 64fca8dcb38..56158c804e3 100644 --- a/drivers/net/wireless/ath5k/hw.h +++ b/drivers/net/wireless/ath5k/desc.h @@ -1,8 +1,6 @@ /* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -15,159 +13,9 @@ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * */ -#include <linux/delay.h> - -/* - * Gain settings - */ - -enum ath5k_rfgain { - AR5K_RFGAIN_INACTIVE = 0, - AR5K_RFGAIN_READ_REQUESTED, - AR5K_RFGAIN_NEED_CHANGE, -}; - -#define AR5K_GAIN_CRN_FIX_BITS_5111 4 -#define AR5K_GAIN_CRN_FIX_BITS_5112 7 -#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 -#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 -#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 -#define AR5K_GAIN_CCK_PROBE_CORR 5 -#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 -#define AR5K_GAIN_STEP_COUNT 10 -#define AR5K_GAIN_PARAM_TX_CLIP 0 -#define AR5K_GAIN_PARAM_PD_90 1 -#define AR5K_GAIN_PARAM_PD_84 2 -#define AR5K_GAIN_PARAM_GAIN_SEL 3 -#define AR5K_GAIN_PARAM_MIX_ORN 0 -#define AR5K_GAIN_PARAM_PD_138 1 -#define AR5K_GAIN_PARAM_PD_137 2 -#define AR5K_GAIN_PARAM_PD_136 3 -#define AR5K_GAIN_PARAM_PD_132 4 -#define AR5K_GAIN_PARAM_PD_131 5 -#define AR5K_GAIN_PARAM_PD_130 6 -#define AR5K_GAIN_CHECK_ADJUST(_g) \ - ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) - -struct ath5k_gain_opt_step { - s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; - s32 gos_gain; -}; - -struct ath5k_gain { - u32 g_step_idx; - u32 g_current; - u32 g_target; - u32 g_low; - u32 g_high; - u32 g_f_corr; - u32 g_active; - const struct ath5k_gain_opt_step *g_step; -}; - - -/* - * HW SPECIFIC STRUCTS - */ - -/* Some EEPROM defines */ -#define AR5K_EEPROM_EEP_SCALE 100 -#define AR5K_EEPROM_EEP_DELTA 10 -#define AR5K_EEPROM_N_MODES 3 -#define AR5K_EEPROM_N_5GHZ_CHAN 10 -#define AR5K_EEPROM_N_2GHZ_CHAN 3 -#define AR5K_EEPROM_MAX_CHAN 10 -#define AR5K_EEPROM_N_PCDAC 11 -#define AR5K_EEPROM_N_TEST_FREQ 8 -#define AR5K_EEPROM_N_EDGES 8 -#define AR5K_EEPROM_N_INTERCEPTS 11 -#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) -#define AR5K_EEPROM_PCDAC_M 0x3f -#define AR5K_EEPROM_PCDAC_START 1 -#define AR5K_EEPROM_PCDAC_STOP 63 -#define AR5K_EEPROM_PCDAC_STEP 1 -#define AR5K_EEPROM_NON_EDGE_M 0x40 -#define AR5K_EEPROM_CHANNEL_POWER 8 -#define AR5K_EEPROM_N_OBDB 4 -#define AR5K_EEPROM_OBDB_DIS 0xffff -#define AR5K_EEPROM_CHANNEL_DIS 0xff -#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) -#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) -#define AR5K_EEPROM_MAX_CTLS 32 -#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 -#define AR5K_EEPROM_N_XPD0_POINTS 4 -#define AR5K_EEPROM_N_XPD3_POINTS 3 -#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 -#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 -#define AR5K_EEPROM_POWER_M 0x3f -#define AR5K_EEPROM_POWER_MIN 0 -#define AR5K_EEPROM_POWER_MAX 3150 -#define AR5K_EEPROM_POWER_STEP 50 -#define AR5K_EEPROM_POWER_TABLE_SIZE 64 -#define AR5K_EEPROM_N_POWER_LOC_11B 4 -#define AR5K_EEPROM_N_POWER_LOC_11G 6 -#define AR5K_EEPROM_I_GAIN 10 -#define AR5K_EEPROM_CCK_OFDM_DELTA 15 -#define AR5K_EEPROM_N_IQ_CAL 2 - -/* Struct to hold EEPROM calibration data */ -struct ath5k_eeprom_info { - u16 ee_magic; - u16 ee_protect; - u16 ee_regdomain; - u16 ee_version; - u16 ee_header; - u16 ee_ant_gain; - u16 ee_misc0; - u16 ee_misc1; - u16 ee_cck_ofdm_gain_delta; - u16 ee_cck_ofdm_power_delta; - u16 ee_scaled_cck_delta; - - /* Used for tx thermal adjustment (eeprom_init, rfregs) */ - u16 ee_tx_clip; - u16 ee_pwd_84; - u16 ee_pwd_90; - u16 ee_gain_select; - - /* RF Calibration settings (reset, rfregs) */ - u16 ee_i_cal[AR5K_EEPROM_N_MODES]; - u16 ee_q_cal[AR5K_EEPROM_N_MODES]; - u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; - u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; - u16 ee_xr_power[AR5K_EEPROM_N_MODES]; - u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; - u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; - u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; - u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; - u16 ee_thr_62[AR5K_EEPROM_N_MODES]; - u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; - u16 ee_xpd[AR5K_EEPROM_N_MODES]; - u16 ee_x_gain[AR5K_EEPROM_N_MODES]; - u16 ee_i_gain[AR5K_EEPROM_N_MODES]; - u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; - - /* Unused */ - u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; - u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ - - /* Conformance test limits (Unused) */ - u16 ee_ctls; - u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; - - /* Noise Floor Calibration settings */ - s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; - s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; - s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; -}; - /* * Internal RX/TX descriptor structures * (rX: reserved fields possibily used by future versions of the ar5k chipset) @@ -178,14 +26,15 @@ struct ath5k_eeprom_info { */ struct ath5k_hw_rx_ctl { u32 rx_control_0; /* RX control word 0 */ + u32 rx_control_1; /* RX control word 1 */ +} __packed; +/* RX control word 0 field/sflags */ #define AR5K_DESC_RX_CTL0 0x00000000 - u32 rx_control_1; /* RX control word 1 */ - +/* RX control word 1 fields/flags */ #define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff #define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 -} __packed; /* * common hardware RX status descriptor @@ -197,6 +46,7 @@ struct ath5k_hw_rx_status { } __packed; /* 5210/5211 */ +/* RX status word 0 fields/flags */ #define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff #define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 @@ -205,6 +55,8 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27 + +/* RX status word 1 fields/flags */ #define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 @@ -220,6 +72,7 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 /* 5212 */ +/* RX status word 0 fields/flags */ #define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff #define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 #define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 @@ -229,6 +82,8 @@ struct ath5k_hw_rx_status { #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 + +/* RX status word 1 fields/flags */ #define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 #define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 #define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 @@ -246,16 +101,18 @@ struct ath5k_hw_rx_status { * common hardware RX error descriptor */ struct ath5k_hw_rx_error { - u32 rx_error_0; /* RX error word 0 */ + u32 rx_error_0; /* RX status word 0 */ + u32 rx_error_1; /* RX status word 1 */ +} __packed; +/* RX error word 0 fields/flags */ #define AR5K_RX_DESC_ERROR0 0x00000000 - u32 rx_error_1; /* RX error word 1 */ - +/* RX error word 1 fields/flags */ #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8 -} __packed; +/* PHY Error codes */ #define AR5K_DESC_RX_PHY_ERROR_NONE 0x00 #define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20 #define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40 @@ -270,7 +127,10 @@ struct ath5k_hw_rx_error { */ struct ath5k_hw_2w_tx_ctl { u32 tx_control_0; /* TX control word 0 */ + u32 tx_control_1; /* TX control word 1 */ +} __packed; +/* TX control word 0 fields/flags */ #define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/ #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12 @@ -284,29 +144,34 @@ struct ath5k_hw_2w_tx_ctl { #define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 #define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 #define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 - u32 tx_control_1; /* TX control word 1 */ - +/* TX control word 1 fields/flags */ #define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff #define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000 -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/ #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20 #define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/ #define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/ -} __packed; +/* Frame types */ #define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08 @@ -378,7 +243,10 @@ struct ath5k_hw_4w_tx_ctl { */ struct ath5k_hw_tx_status { u32 tx_status_0; /* TX status word 0 */ + u32 tx_status_1; /* TX status word 1 */ +} __packed; +/* TX status word 0 fields/flags */ #define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 #define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 #define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 @@ -400,8 +268,7 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 - u32 tx_status_1; /* TX status word 1 */ - +/* TX status word 1 fields/flags */ #define AR5K_DESC_TX_STATUS1_DONE 0x00000001 #define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe #define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 @@ -411,8 +278,6 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21 #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000 #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000 -} __packed; - /* * 5210/5211 hardware TX descriptor @@ -441,176 +306,27 @@ struct ath5k_hw_all_rx_desc { } u; } __packed; - /* - * AR5K REGISTER ACCESS + * Atheros hardware descriptor + * This is read and written to by the hardware */ +struct ath5k_desc { + u32 ds_link; /* physical address of the next descriptor */ + u32 ds_data; /* physical address of data buffer (skb) */ -/*Swap RX/TX Descriptor for big endian archs*/ -#if defined(__BIG_ENDIAN) -#define AR5K_INIT_CFG ( \ - AR5K_CFG_SWTD | AR5K_CFG_SWRD \ -) -#else -#define AR5K_INIT_CFG 0x00000000 -#endif - -/*#define AR5K_REG_READ(_reg) ath5k_hw_reg_read(ah, _reg) - -#define AR5K_REG_WRITE(_reg, _val) ath5k_hw_reg_write(ah, _val, _reg)*/ - -#define AR5K_REG_SM(_val, _flags) \ - (((_val) << _flags##_S) & (_flags)) - -#define AR5K_REG_MS(_val, _flags) \ - (((_val) & (_flags)) >> _flags##_S) - -/* Some registers can hold multiple values of interest. For this - * reason when we want to write to these registers we must first - * retrieve the values which we do not want to clear (lets call this - * old_data) and then set the register with this and our new_value: - * ( old_data | new_value) */ -#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ - (((_val) << _flags##_S) & (_flags)), _reg) - -#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ - (_mask)) | (_flags), _reg) - -#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) - -#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_REG_WAIT(_i) do { \ - if (_i % 64) \ - udelay(1); \ -} while (0) - -#define AR5K_EEPROM_READ(_o, _v) do { \ - if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0) \ - return (ret); \ -} while (0) - -#define AR5K_EEPROM_READ_HDR(_o, _v) \ - AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ - -/* Read status of selected queue */ -#define AR5K_REG_READ_Q(ah, _reg, _queue) \ - (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ - -#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ - ath5k_hw_reg_write(ah, (1 << _queue), _reg) - -#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ - _reg |= 1 << _queue; \ -} while (0) - -#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ - _reg &= ~(1 << _queue); \ -} while (0) - -#define AR5K_LOW_ID(_a)( \ -(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ -) - -#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) - -/* - * Initial register values - */ - -/* - * Common initial register values - */ -#define AR5K_INIT_MODE CHANNEL_B - -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_CARR_SENSE_EN 1 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 -#define AR5K_INIT_TOPS 8 -#define AR5K_INIT_RXNOFRM 8 -#define AR5K_INIT_RPGTO 0 -#define AR5K_INIT_TXNOFRM 0 -#define AR5K_INIT_BEACON_PERIOD 65535 -#define AR5K_INIT_TIM_OFFSET 0 -#define AR5K_INIT_BEACON_EN 0 -#define AR5K_INIT_RESET_TSF 0 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) -#define AR5K_INIT_BEACON_CONTROL ( \ - (AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) | \ - (AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD) \ -) - -/* - * Non-common initial register values which have to be loaded into the - * card at boot time and after each reset. - */ - -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - -#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS -#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + union { + struct ath5k_hw_5210_tx_desc ds_tx5210; + struct ath5k_hw_5212_tx_desc ds_tx5212; + struct ath5k_hw_all_rx_desc ds_rx; + } ud; +} __packed; -static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) -{ - u32 retval = 0, bit, i; +#define AR5K_RXDESC_INTREQ 0x0020 - for (i = 0; i < bits; i++) { - bit = (val >> i) & 1; - retval = (retval << 1) | bit; - } +#define AR5K_TXDESC_CLRDMASK 0x0001 +#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ +#define AR5K_TXDESC_RTSENA 0x0004 +#define AR5K_TXDESC_CTSENA 0x0008 +#define AR5K_TXDESC_INTREQ 0x0010 +#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - return retval; -} diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c new file mode 100644 index 00000000000..7adceb2c7fa --- /dev/null +++ b/drivers/net/wireless/ath5k/dma.c @@ -0,0 +1,605 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* DMA and interrupt masking functions * +\*************************************/ + +/* + * dma.c - DMA and interrupt masking functions + * + * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and + * handle queue setup for 5210 chipset (rest are handled on qcu.c). + * Also we setup interrupt mask register (IMR) and read the various iterrupt + * status registers (ISR). + * + * TODO: Handle SISR on 5211+ and introduce a function to return the queue + * number that resulted the interrupt. + */ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*********\ +* Receive * +\*********/ + +/** + * ath5k_hw_start_rx_dma - Start DMA receive + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); +} + +/** + * ath5k_hw_stop_rx_dma - Stop DMA receive + * + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 1000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(10); + + return i ? 0 : -EBUSY; +} + +/** + * ath5k_hw_get_rxdp - Get RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * + * XXX: Is RXDP read and clear ? + */ +u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/** + * ath5k_hw_set_rxdp - Set RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * @phys_addr: RX descriptor address + * + * XXX: Should we check if rx is enabled before setting rxdp ? + */ +void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +{ + ATH5K_TRACE(ah->ah_sc); + + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); +} + + +/**********\ +* Transmit * +\**********/ + +/** + * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Start DMA transmit for a specific queue and since 5210 doesn't have + * QCU/DCU, set up queue parameters for 5210 here based on queue type (one + * queue for normal data and one queue for beacons). For queue setup + * on newer chips check out qcu.c. Returns -EINVAL if queue number is out + * of range or if queue is already disabled. + * + * NOTE: Must be called after setting up tx control descriptor for that + * queue (see below). + */ +int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set the queue by type on 5210 + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + break; + case AR5K_TX_QUEUE_BEACON: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BSR); + break; + case AR5K_TX_QUEUE_CAB: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | + AR5K_BCR_BDMAE, AR5K_BSR); + break; + default: + return -EINVAL; + } + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/** + * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Stop DMA transmit on a specific hw queue and drain queue so we don't + * have any pending frames. Returns -EBUSY if we still have pending frames, + * -EINVAL if queue number is out of range. + * + */ +int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 40; + u32 tx_queue, pending; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set by queue type + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + /* XXX Fix me... */ + tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, 0, AR5K_BSR); + break; + default: + return -EINVAL; + } + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /*Check for pending frames*/ + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* For 2413+ order PCU to drop packets using + * QUIET mechanism */ + if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && + pending){ + /* Set periodicity and duration */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| + AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR), + AR5K_QUIET_CTL2); + + /* Enable quiet period for current TSF */ + ath5k_hw_reg_write(ah, + AR5K_QUIET_CTL1_QT_EN | + AR5K_REG_SM(ath5k_hw_reg_read(ah, + AR5K_TSF_L32_5211) >> 10, + AR5K_QUIET_CTL1_NEXT_QT_TSF), + AR5K_QUIET_CTL1); + + /* Force channel idle high */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANEL_IDLE_HIGH); + + /* Wait a while and disable mechanism */ + udelay(200); + AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1, + AR5K_QUIET_CTL1_QT_EN); + + /* Re-check for pending frames */ + i = 40; + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANEL_IDLE_HIGH); + } + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; + } + + /* TODO: Check for success on 5210 else return error */ + return 0; +} + +/** + * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Get TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and use tx queue type since we only have 2 queues. + * We use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just read the corresponding TXDP register. + * + * XXX: Is TXDP read and clear ? + */ +u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return 0xffffffff; + } + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/** + * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Set TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and we use tx queue type since we only have 2 queues + * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just set the corresponding TXDP register. + * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still + * active. + */ +int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return -EINVAL; + } + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/** + * ath5k_hw_update_tx_triglevel - Update tx trigger level + * + * @ah: The &struct ath5k_hw + * @increase: Flag to force increase of trigger level + * + * This function increases/decreases the tx trigger level for the tx fifo + * buffer (aka FIFO threshold) that is used to indicate when PCU flushes + * the buffer and transmits it's data. Lowering this results sending small + * frames more quickly but can lead to tx underruns, raising it a lot can + * result other problems (i think bmiss is related). Right now we start with + * the lowest possible (64Bytes) and if we get tx underrun we increase it using + * the increase flag. Returns -EIO if we have have reached maximum/minimum. + * + * XXX: Link this with tx DMA size ? + * XXX: Use it to save interrupts ? + * TODO: Needs testing, i think it's related to bmiss... + */ +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (!increase) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_imr(ah, imr); + + return ret; +} + +/*******************\ +* Interrupt masking * +\*******************/ + +/** + * ath5k_hw_is_intr_pending - Check if we have pending interrupts + * + * @ah: The &struct ath5k_hw + * + * Check if we have pending interrupts to process. Returns 1 if we + * have pending interrupts and 0 if we haven't. + */ +bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; +} + +/** + * ath5k_hw_get_isr - Get interrupt status + * + * @ah: The @struct ath5k_hw + * @interrupt_mask: Driver's interrupt mask used to filter out + * interrupts in sw. + * + * This function is used inside our interrupt handler to determine the reason + * for the interrupt by reading Primary Interrupt Status Register. Returns an + * abstract interrupt status mask which is mostly ISR with some uncommon bits + * being mapped on some standard non hw-specific positions + * (check out &ath5k_int). + * + * NOTE: We use read-and-clear register, so after this function is called ISR + * is zeroed. + * + * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all + * plus it can be misleading (one might thing that we save interrupts this way) + */ +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Read interrupt status from the Interrupt Status register + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(data == AR5K_INT_NOCARD)) { + *interrupt_mask = data; + return -ENODEV; + } + } else { + /* + * Read interrupt status from the Read-And-Clear + * shadow register. + * Note: PISR/SISR Not available on 5210 + */ + data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); + } + + /* + * Get abstract interrupt mask (driver-compatible) + */ + *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + + if (unlikely(data == AR5K_INT_NOCARD)) + return -ENODEV; + + if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) + *interrupt_mask |= AR5K_INT_RX; + + if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR + | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) + *interrupt_mask |= AR5K_INT_TX; + + if (ah->ah_version != AR5K_AR5210) { + /*HIU = Host Interface Unit (PCI etc)*/ + if (unlikely(data & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(data & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + } + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successfull assoc + some jiffies. + */ +#if 0 + interrupt_mask &= ~AR5K_INT_BMISS; +#endif + + /* + * In case we didn't handle anything, + * print the register value. + */ + if (unlikely(*interrupt_mask == 0 && net_ratelimit())) + ATH5K_PRINTF("0x%08x\n", data); + + return 0; +} + +/** + * ath5k_hw_set_imr - Set interrupt mask + * + * @ah: The &struct ath5k_hw + * @new_mask: The new interrupt mask to be set + * + * Set the interrupt mask in hw to save interrupts. We do that by mapping + * ath5k_int bits to hw-specific bits to remove abstraction and writing + * Interrupt Mask Register. + */ +enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards). + */ + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + + old_mask = ah->ah_imr; + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (new_mask & AR5K_INT_RX) + int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | + AR5K_IMR_RXDESC; + + if (new_mask & AR5K_INT_TX) + int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | + AR5K_IMR_TXURN; + + if (ah->ah_version != AR5K_AR5210) { + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | + AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); + } + } + + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts */ + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + + return old_mask; +} + diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c new file mode 100644 index 00000000000..a883839b6a9 --- /dev/null +++ b/drivers/net/wireless/ath5k/eeprom.c @@ -0,0 +1,466 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* EEPROM access functions and helpers * +\*************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Read from eeprom + */ +static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) +{ + u32 status, timeout; + + ATH5K_TRACE(ah->ah_sc); + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return -EIO; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return 0; + } + udelay(15); + } + + return -ETIMEDOUT; +} + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret, i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna modes */ + ah->ah_antenna[mode][0] = + (ee->ee_ant_control[mode][0] << 4) | 0x1; + ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && + mode == AR5K_EEPROM_MODE_11G) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Initialize eeprom & capabilities structs + */ +int ath5k_eeprom_init(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + unsigned int mode, i; + int ret; + u32 offset; + u16 val; + + /* Initial TX thermal adjustment values */ + ee->ee_tx_clip = 4; + ee->ee_pwd_84 = ee->ee_pwd_90 = 1; + ee->ee_gain_select = 1; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + +#ifdef notyet + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + return -EIO; + } +#endif + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + /* + * Get conformance test limit values + */ + offset = AR5K_EEPROM_CTL(ah->ah_ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); + + for (i = 0; i < ee->ee_ctls; i++) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + /* + * Get values for 802.11a (5GHz) + */ + mode = AR5K_EEPROM_MODE_11A; + + ee->ee_turbo_max_power[mode] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + } + + /* + * Get values for 802.11b (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11B; + offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + /* + * Get values for 802.11g (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11G; + offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + } + + /* + * Read 5GHz EEPROM channels + */ + + return 0; +} + +/* + * Read the MAC address from eeprom + */ +int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN]; + u32 total, offset; + u16 data; + int octet, ret; + + memset(mac, 0, ETH_ALEN); + memset(mac_d, 0, ETH_ALEN); + + ret = ath5k_hw_eeprom_read(ah, 0x20, &data); + if (ret) + return ret; + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + ret = ath5k_hw_eeprom_read(ah, offset, &data); + if (ret) + return ret; + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + memcpy(mac, mac_d, ETH_ALEN); + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h new file mode 100644 index 00000000000..a468ecfbb18 --- /dev/null +++ b/drivers/net/wireless/ath5k/eeprom.h @@ -0,0 +1,215 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ +#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ +#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ +#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x4007 + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ + +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 0x00c4 +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) +#define AR5K_EEPROM_MISC1 0x00c5 +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) + + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 + +#define AR5K_EEPROM_READ(_o, _v) do { \ + ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ + if (ret) \ + return ret; \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +/* Struct to hold EEPROM calibration data */ +struct ath5k_eeprom_info { + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* Used for tx thermal adjustment (eeprom_init, rfregs) */ + u16 ee_tx_clip; + u16 ee_pwd_84; + u16 ee_pwd_90; + u16 ee_gain_select; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + + /* Unused */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; + u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ + + /* Conformance test limits (Unused) */ + u16 ee_ctls; + u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; +}; diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath5k/gpio.c new file mode 100644 index 00000000000..b77205adc18 --- /dev/null +++ b/drivers/net/wireless/ath5k/gpio.c @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************\ + GPIO Functions +\****************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Set led state + */ +void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +{ + u32 led; + /*5210 has different led mode handling*/ + u32 led_5210; + + ATH5K_TRACE(ah->ah_sc); + + /*Reset led status*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); + + /* + * Some blinking values, define at your wish + */ + switch (state) { + case AR5K_LED_SCAN: + case AR5K_LED_AUTH: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; + led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; + break; + + case AR5K_LED_INIT: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + + case AR5K_LED_ASSOC: + case AR5K_LED_RUN: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; + led_5210 = AR5K_PCICFG_LED_ASSOC; + break; + + default: + led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + } + + /*Write new status to the register*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); +} + +/* + * Set GPIO inputs + */ +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Set GPIO outputs + */ +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Get GPIO state + */ +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/* + * Set GPIO state + */ +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + ATH5K_TRACE(ah->ah_sc); + + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/* + * Initialize the GPIO interrupt (RFKill switch) + */ +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c deleted file mode 100644 index ad1a5b422c8..00000000000 --- a/drivers/net/wireless/ath5k/hw.c +++ /dev/null @@ -1,4529 +0,0 @@ -/* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> - * Copyright (c) 2007 Pavel Roskin <proski@gnu.org> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/* - * HW related functions for Atheros Wireless LAN devices. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include "reg.h" -#include "base.h" -#include "debug.h" - -/* Rate tables */ -static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; -static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; -static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; -static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; -static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; - -/* Prototypes */ -static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); -static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); -static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int); -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); -static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -static int ath5k_hw_get_capabilities(struct ath5k_hw *); - -static int ath5k_eeprom_init(struct ath5k_hw *); -static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *); - -static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16); -static int ath5k_hw_disable_pspoll(struct ath5k_hw *); - -/* - * Enable to overwrite the country code (use "00" for debug) - */ -#if 0 -#define COUNTRYCODE "00" -#endif - -/*******************\ - General Functions -\*******************/ - -/* - * Functions used internaly - */ - -static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) -{ - return turbo ? (usec * 80) : (usec * 40); -} - -static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) -{ - return turbo ? (clock / 80) : (clock / 40); -} - -/* - * Check if a register write has been completed - */ -int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, - bool is_set) -{ - int i; - u32 data; - - for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { - data = ath5k_hw_reg_read(ah, reg); - if (is_set && (data & flag)) - break; - else if ((data & flag) == val) - break; - udelay(15); - } - - return (i <= 0) ? -EAGAIN : 0; -} - - -/***************************************\ - Attach/Detach Functions -\***************************************/ - -/* - * Power On Self Test helper function - */ -static int ath5k_hw_post(struct ath5k_hw *ah) -{ - - int i, c; - u16 cur_reg; - u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; - u32 var_pattern; - u32 static_pattern[4] = { - 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999 - }; - u32 init_val; - u32 cur_val; - - for (c = 0; c < 2; c++) { - - cur_reg = regs[c]; - - /* Save previous value */ - init_val = ath5k_hw_reg_read(ah, cur_reg); - - for (i = 0; i < 256; i++) { - var_pattern = i << 16 | i; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x0039080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - for (i = 0; i < 4; i++) { - var_pattern = static_pattern[i]; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x003b080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - /* Restore previous value */ - ath5k_hw_reg_write(ah, init_val, cur_reg); - - } - - return 0; - -} - -/* - * Check if the device is supported and initialize the needed structs - */ -struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) -{ - struct ath5k_hw *ah; - struct pci_dev *pdev = sc->pdev; - u8 mac[ETH_ALEN]; - int ret; - u32 srev; - - /*If we passed the test malloc a ath5k_hw struct*/ - ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (ah == NULL) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err; - } - - ah->ah_sc = sc; - ah->ah_iobase = sc->iobase; - - /* - * HW information - */ - - ah->ah_op_mode = IEEE80211_IF_TYPE_STA; - ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; - ah->ah_turbo = false; - ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_imr = 0; - ah->ah_atim_window = 0; - ah->ah_aifs = AR5K_TUNE_AIFS; - ah->ah_cw_min = AR5K_TUNE_CWMIN; - ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; - ah->ah_software_retry = false; - ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; - - /* - * Set the mac revision based on the pci id - */ - ah->ah_version = mac_version; - - /*Fill the ath5k_hw struct with the needed functions*/ - if (ah->ah_version == AR5K_AR5212) - ah->ah_magic = AR5K_EEPROM_MAGIC_5212; - else if (ah->ah_version == AR5K_AR5211) - ah->ah_magic = AR5K_EEPROM_MAGIC_5211; - - if (ah->ah_version == AR5K_AR5212) { - ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; - ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; - } else { - ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; - ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; - } - - if (ah->ah_version == AR5K_AR5212) - ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; - else if (ah->ah_version <= AR5K_AR5211) - ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; - - /* Bring device out of sleep and reset it's units */ - ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true); - if (ret) - goto err_free; - - /* Get MAC, PHY and RADIO revisions */ - srev = ath5k_hw_reg_read(ah, AR5K_SREV); - ah->ah_mac_srev = srev; - ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); - ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); - ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & - 0xffffffff; - ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_5GHZ); - - if (ah->ah_version == AR5K_AR5210) - ah->ah_radio_2ghz_revision = 0; - else - ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); - - /* Return on unsuported chips (unsupported eeprom etc) */ - if ((srev >= AR5K_SREV_VER_AR5416) && - (srev < AR5K_SREV_VER_AR2425)) { - ATH5K_ERR(sc, "Device not yet supported.\n"); - ret = -ENODEV; - goto err_free; - } else if (srev == AR5K_SREV_VER_AR2425) { - ATH5K_WARN(sc, "Support for RF2425 is under development.\n"); - } - - /* Identify single chip solutions */ - if (((srev <= AR5K_SREV_VER_AR5414) && - (srev >= AR5K_SREV_VER_AR2413)) || - (srev == AR5K_SREV_VER_AR2425)) { - ah->ah_single_chip = true; - } else { - ah->ah_single_chip = false; - } - - /* Single chip radio */ - if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) - ah->ah_radio_2ghz_revision = 0; - - /* Identify the radio chip*/ - if (ah->ah_version == AR5K_AR5210) { - ah->ah_radio = AR5K_RF5110; - /* - * Register returns 0x0/0x04 for radio revision - * so ath5k_hw_radio_revision doesn't parse the value - * correctly. For now we are based on mac's srev to - * identify RF2425 radio. - */ - } else if (srev == AR5K_SREV_VER_AR2425) { - ah->ah_radio = AR5K_RF2425; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { - ah->ah_radio = AR5K_RF5111; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { - ah->ah_radio = AR5K_RF5112; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { - ah->ah_radio = AR5K_RF2413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { - ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { - /* AR5424 */ - if (srev >= AR5K_SREV_VER_AR5424) { - ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - /* AR2424 */ - } else { - ah->ah_radio = AR5K_RF2413; /* For testing */ - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } - } - ah->ah_phy = AR5K_PHY(0); - - /* - * Write PCI-E power save settings - */ - if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { - ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); - ath5k_hw_reg_write(ah, 0x24924924, 0x4080); - ath5k_hw_reg_write(ah, 0x28000039, 0x4080); - ath5k_hw_reg_write(ah, 0x53160824, 0x4080); - ath5k_hw_reg_write(ah, 0xe5980579, 0x4080); - ath5k_hw_reg_write(ah, 0x001defff, 0x4080); - ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080); - ath5k_hw_reg_write(ah, 0xbe105554, 0x4080); - ath5k_hw_reg_write(ah, 0x000e3007, 0x4080); - ath5k_hw_reg_write(ah, 0x00000000, 0x4084); - } - - /* - * POST - */ - ret = ath5k_hw_post(ah); - if (ret) - goto err_free; - - /* Write AR5K_PCICFG_UNK on 2112B and later chips */ - if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || - srev > AR5K_SREV_VER_AR2413) { - ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); - } - - /* - * Get card capabilities, values, ... - */ - ret = ath5k_eeprom_init(ah); - if (ret) { - ATH5K_ERR(sc, "unable to init EEPROM\n"); - goto err_free; - } - - /* Get misc capabilities */ - ret = ath5k_hw_get_capabilities(ah); - if (ret) { - ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - /* Get MAC address */ - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - ath5k_hw_set_lladdr(ah, mac); - /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ - memset(ah->ah_bssid, 0xff, ETH_ALEN); - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - ath5k_hw_set_opmode(ah); - - ath5k_hw_set_rfgain_opt(ah); - - return ah; -err_free: - kfree(ah); -err: - return ERR_PTR(ret); -} - -/* - * Bring up MAC + PHY Chips - */ -static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) -{ - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 turbo, mode, clock, bus_flags; - int ret; - - turbo = 0; - mode = 0; - clock = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); - return ret; - } - - if (ah->ah_version != AR5K_AR5210) { - /* - * Get channel mode flags - */ - - if (ah->ah_radio >= AR5K_RF5112) { - mode = AR5K_PHY_MODE_RAD_RF5112; - clock = AR5K_PHY_PLL_RF5112; - } else { - mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ - clock = AR5K_PHY_PLL_RF5111; /*Zero*/ - } - - if (flags & CHANNEL_2GHZ) { - mode |= AR5K_PHY_MODE_FREQ_2GHZ; - clock |= AR5K_PHY_PLL_44MHZ; - - if (flags & CHANNEL_CCK) { - mode |= AR5K_PHY_MODE_MOD_CCK; - } else if (flags & CHANNEL_OFDM) { - /* XXX Dynamic OFDM/CCK is not supported by the - * AR5211 so we set MOD_OFDM for plain g (no - * CCK headers) operation. We need to test - * this, 5211 might support ofdm-only g after - * all, there are also initial register values - * in the code for g mode (see initvals.c). */ - if (ah->ah_version == AR5K_AR5211) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else - mode |= AR5K_PHY_MODE_MOD_DYN; - } else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else if (flags & CHANNEL_5GHZ) { - mode |= AR5K_PHY_MODE_FREQ_5GHZ; - clock |= AR5K_PHY_PLL_40MHZ; - - if (flags & CHANNEL_OFDM) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else { - ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); - return -EINVAL; - } - - if (flags & CHANNEL_TURBO) - turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; - } else { /* Reset the device */ - - /* ...enable Atheros turbo mode if requested */ - if (flags & CHANNEL_TURBO) - ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, - AR5K_PHY_TURBO); - } - - /* reseting PCI on PCI-E cards results card to hang - * and always return 0xffff... so we ingore that flag - * for PCI-E cards */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; - - /* Reset chipset */ - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_BASEBAND | bus_flags); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version == AR5K_AR5210) - udelay(2300); - - /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); - return ret; - } - - /* ...final warm reset */ - if (ath5k_hw_nic_reset(ah, 0)) { - ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version != AR5K_AR5210) { - /* ...set the PHY operating mode */ - ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); - - ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); - ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); - } - - return 0; -} - -/* - * Get the rate table for a specific operation mode - */ -const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, - unsigned int mode) -{ - ATH5K_TRACE(ah->ah_sc); - - if (!test_bit(mode, ah->ah_capabilities.cap_mode)) - return NULL; - - /* Get rate tables */ - switch (mode) { - case AR5K_MODE_11A: - return &ath5k_rt_11a; - case AR5K_MODE_11A_TURBO: - return &ath5k_rt_turbo; - case AR5K_MODE_11B: - return &ath5k_rt_11b; - case AR5K_MODE_11G: - return &ath5k_rt_11g; - case AR5K_MODE_11G_TURBO: - return &ath5k_rt_xr; - } - - return NULL; -} - -/* - * Free the ath5k_hw struct - */ -void ath5k_hw_detach(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); - - if (ah->ah_rf_banks != NULL) - kfree(ah->ah_rf_banks); - - /* assume interrupts are down */ - kfree(ah); -} - -/****************************\ - Reset function and helpers -\****************************/ - -/** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 - * - * @ah: the &struct ath5k_hw - * @channel: the currently set channel upon reset - * - * Write the OFDM timings for the AR5212 upon reset. This is a helper for - * ath5k_hw_reset(). This seems to tune the PLL a specified frequency - * depending on the bandwidth of the channel. - * - */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - /* Get exponent and mantissa and set it */ - u32 coef_scaled, coef_exp, coef_man, - ds_coef_exp, ds_coef_man, clock; - - if (!(ah->ah_version == AR5K_AR5212) || - !(channel->hw_value & CHANNEL_OFDM)) - BUG(); - - /* Seems there are two PLLs, one for baseband sampling and one - * for tuning. Tuning basebands are 40 MHz or 80MHz when in - * turbo. */ - clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; - coef_scaled = ((5 * (clock << 24)) / 2) / - channel->center_freq; - - for (coef_exp = 31; coef_exp > 0; coef_exp--) - if ((coef_scaled >> coef_exp) & 0x1) - break; - - if (!coef_exp) - return -EINVAL; - - coef_exp = 14 - (coef_exp - 24); - coef_man = coef_scaled + - (1 << (24 - coef_exp - 1)); - ds_coef_man = coef_man >> (24 - coef_exp); - ds_coef_exp = coef_exp - 16; - - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); - - return 0; -} - -/** - * ath5k_hw_write_rate_duration - set rate duration during hw resets - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode - * - * Write the rate duration table for the current mode upon hw reset. This - * is a helper for ath5k_hw_reset(). It seems all this is doing is setting - * an ACK timeout for the hardware for the current mode for each rate. The - * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, - * and 11Mbps) have another register for the short preamble ACK timeout - * calculation. - * - */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int mode) -{ - struct ath5k_softc *sc = ah->ah_sc; - const struct ath5k_rate_table *rt; - struct ieee80211_rate srate = {}; - unsigned int i; - - /* Get rate table for the current operating mode */ - rt = ath5k_hw_get_rate_table(ah, mode); - - /* Write rate duration table */ - for (i = 0; i < rt->rate_count; i++) { - const struct ath5k_rate *rate, *control_rate; - - u32 reg; - u16 tx_time; - - rate = &rt->rates[i]; - control_rate = &rt->rates[rate->control_rate]; - - /* Set ACK timeout */ - reg = AR5K_RATE_DUR(rate->rate_code); - - srate.bitrate = control_rate->rate_kbps/100; - - /* An ACK frame consists of 10 bytes. If you add the FCS, - * which ieee80211_generic_frame_duration() adds, - * its 14 bytes. Note we use the control rate and not the - * actual rate for this rate. See mac80211 tx.c - * ieee80211_duration() for a brief description of - * what rate we should choose to TX ACKs. */ - tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - sc->vif, 10, &srate)); - - ath5k_hw_reg_write(ah, tx_time, reg); - - if (!HAS_SHPREAMBLE(i)) - continue; - - /* - * We're not distinguishing short preamble here, - * This is true, all we'll get is a longer value here - * which is not necessarilly bad. We could use - * export ieee80211_frame_duration() but that needs to be - * fixed first to be properly used by mac802111 drivers: - * - * - remove erp stuff and let the routine figure ofdm - * erp rates - * - remove passing argument ieee80211_local as - * drivers don't have access to it - * - move drivers using ieee80211_generic_frame_duration() - * to this - */ - ath5k_hw_reg_write(ah, tx_time, - reg + (AR5K_SET_SHORT_PREAMBLE << 2)); - } -} - -/* - * Main reset function - */ -int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, - struct ieee80211_channel *channel, bool change_channel) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 data, s_seq, s_ant, s_led[3], dma_size; - unsigned int i, mode, freq, ee_mode, ant[2]; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - s_seq = 0; - s_ant = 0; - ee_mode = 0; - freq = 0; - mode = 0; - - /* - * Save some registers before a reset - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - if (change_channel) { - /* Seq number for queue 0 -do this for all queues ? */ - s_seq = ath5k_hw_reg_read(ah, - AR5K_QUEUE_DFS_SEQNUM(0)); - /*Default antenna*/ - s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); - } - } - - /*GPIOs*/ - s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; - s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); - s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - if (change_channel && ah->ah_rf_banks != NULL) - ath5k_hw_get_rf_gain(ah); - - - /*Wakeup the device*/ - ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); - if (ret) - return ret; - - /* - * Initialize operating mode - */ - ah->ah_op_mode = op_mode; - - /* - * 5111/5112 Settings - * 5210 only comes with RF5110 - */ - if (ah->ah_version != AR5K_AR5210) { - if (ah->ah_radio != AR5K_RF5111 && - ah->ah_radio != AR5K_RF5112 && - ah->ah_radio != AR5K_RF5413 && - ah->ah_radio != AR5K_RF2413 && - ah->ah_radio != AR5K_RF2425) { - ATH5K_ERR(ah->ah_sc, - "invalid phy radio: %u\n", ah->ah_radio); - return -EINVAL; - } - - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - mode = AR5K_MODE_11A; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - mode = AR5K_MODE_11G; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - mode = AR5K_MODE_11B; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11B; - break; - case CHANNEL_T: - mode = AR5K_MODE_11A_TURBO; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - /*Is this ok on 5211 too ?*/ - case CHANNEL_TG: - mode = AR5K_MODE_11G_TURBO; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_XR: - if (ah->ah_version == AR5K_AR5211) { - ATH5K_ERR(ah->ah_sc, - "XR mode not available on 5211"); - return -EINVAL; - } - mode = AR5K_MODE_XR; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } - - /* PHY access enable */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - } - - ret = ath5k_hw_write_initvals(ah, mode, change_channel); - if (ret) - return ret; - - /* - * 5211/5212 Specific - */ - if (ah->ah_version != AR5K_AR5210) { - /* - * Write initial RF gain settings - * This should work for both 5111/5112 - */ - ret = ath5k_hw_rfgain(ah, freq); - if (ret) - return ret; - - mdelay(1); - - /* - * Write some more initial register settings - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); - - if (channel->hw_value == CHANNEL_G) - if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) - ath5k_hw_reg_write(ah, 0x00f80d80, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) - ath5k_hw_reg_write(ah, 0x00380140, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) - ath5k_hw_reg_write(ah, 0x00fc0ec0, - 0x994c); - else /* 2425 */ - ath5k_hw_reg_write(ah, 0x00fc0fc0, - 0x994c); - else - ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; - - /* Just write 0x9b5 ? */ - /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ - ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); - ath5k_hw_reg_write(ah, 0x00000000, 0xa254); - ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); - } - - /* Fix for first revision of the RF5112 RF chipset */ - if (ah->ah_radio >= AR5K_RF5112 && - ah->ah_radio_5ghz_revision < - AR5K_SREV_RAD_5112A) { - ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, - AR5K_PHY_CCKTXCTL); - if (channel->hw_value & CHANNEL_5GHZ) - data = 0xffb81020; - else - data = 0xffb80d20; - ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); - data = 0; - } - - /* - * Set TX power (FIXME) - */ - ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); - if (ret) - return ret; - - /* Write rate duration table only on AR5212 and if - * virtual interface has already been brought up - * XXX: rethink this after new mode changes to - * mac80211 are integrated */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->vif != NULL) - ath5k_hw_write_rate_duration(ah, mode); - - /* - * Write RF registers - */ - ret = ath5k_hw_rfregs(ah, channel, mode); - if (ret) - return ret; - - /* - * Configure additional registers - */ - - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - } - - /*Enable/disable 802.11b mode on 5111 - (enable 2111 frequency converter + CCK)*/ - if (ah->ah_radio == AR5K_RF5111) { - if (mode == AR5K_MODE_11B) - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - } - - /* - * Set channel and calibrate the PHY - */ - ret = ath5k_hw_channel(ah, channel); - if (ret) - return ret; - - /* Set antenna mode */ - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, - ah->ah_antenna[ee_mode][0], 0xfffffc06); - - /* - * In case a fixed antenna was set as default - * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE - * registers. - */ - if (s_ant != 0){ - if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ - ant[0] = ant[1] = AR5K_ANT_FIXED_A; - else /* 2 - Aux */ - ant[0] = ant[1] = AR5K_ANT_FIXED_B; - } else { - ant[0] = AR5K_ANT_FIXED_A; - ant[1] = AR5K_ANT_FIXED_B; - } - - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], - AR5K_PHY_ANT_SWITCH_TABLE_0); - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], - AR5K_PHY_ANT_SWITCH_TABLE_1); - - /* Commit values from EEPROM */ - if (ah->ah_radio == AR5K_RF5111) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, - AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); - - ath5k_hw_reg_write(ah, - AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), - AR5K_PHY_NFTHRES); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, - (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, - 0xffffc07f); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, - (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, - 0xfffc0fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, - (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | - ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), - 0xffff0000); - - ath5k_hw_reg_write(ah, - (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | - (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | - (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | - (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, - ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, - (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); - - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CORR_ENABLE | - (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | - ee->ee_q_cal[ee_mode]); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, - AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, - ee->ee_margin_tx_rx[ee_mode]); - - } else { - mdelay(1); - /* Disable phy and wait */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); - } - - /* - * Restore saved values - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); - ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); - } - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); - ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); - ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); - - /* - * Misc - */ - /* XXX: add ah->aid once mac80211 gives this to us */ - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - - ath5k_hw_set_opmode(ah); - /*PISR/SISR Not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); - /* If we later allow tuning for this, store into sc structure */ - data = AR5K_TUNE_RSSI_THRES | - AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; - ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); - } - - /* - * Set Rx/Tx DMA Configuration - * - * Set maximum DMA size (512) except for PCI-E cards since - * it causes rx overruns and tx errors (tested on 5424 but since - * rx overruns also occur on 5416/5418 with madwifi we set 128 - * for all PCI-E cards to be safe). - * - * In dumps this is 128 for allchips. - * - * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I - * guess we can tweak it and see how it goes ;-) - */ - dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; - if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_SDMAMR, dma_size); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, - AR5K_RXCFG_SDMAMW, dma_size); - } - - /* - * Enable the PHY and wait until completion - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - - /* - * On 5211+ read activation -> rx delay - * and use it. - */ - if (ah->ah_version != AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - data = (channel->hw_value & CHANNEL_CCK) ? - ((data << 2) / 22) : (data / 10); - - udelay(100 + (2 * data)); - data = 0; - } else { - mdelay(1); - } - - /* - * Perform ADC test (?) - */ - data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); - data = 0; - - /* - * Start automatic gain calibration - * - * During AGC calibration RX path is re-routed to - * a signal detector so we don't receive anything. - * - * This method is used to calibrate some static offsets - * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), that doesn't - * interrupt rx path. - * - * If we are in a noisy environment AGC calibration may time - * out. - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL); - - /* At the same time start I/Q calibration for QAM constellation - * -no need for CCK- */ - ah->ah_calibration = false; - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - - /* Wait for gain calibration to finish (we check for I/Q calibration - * during ath5k_phy_calibrate) */ - if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", - channel->center_freq); - return -EAGAIN; - } - - /* - * Start noise floor calibration - * - * If we run NF calibration before AGC, it always times out. - * Binary HAL starts NF and AGC calibration at the same time - * and only waits for AGC to finish. I believe that's wrong because - * during NF calibration, rx path is also routed to a detector, so if - * it doesn't finish we won't have RX. - * - * XXX: Find an interval that's OK for all cards... - */ - ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - if (ret) - return ret; - - /* - * Reset queues and start beacon timers at the end of the reset routine - */ - for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { - /*No QCU on 5210*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); - - ret = ath5k_hw_reset_tx_queue(ah, i); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "failed to reset TX queue #%d\n", i); - return ret; - } - } - - /* Pre-enable interrupts on 5211/5212*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX | - AR5K_INT_FATAL); - - /* - * Set RF kill flags if supported by the device (read from the EEPROM) - * Disable gpio_intr for now since it results system hang. - * TODO: Handle this in ath5k_intr - */ -#if 0 - if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { - ath5k_hw_set_gpio_input(ah, 0); - ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); - if (ah->ah_gpio[0] == 0) - ath5k_hw_set_gpio_intr(ah, 0, 1); - else - ath5k_hw_set_gpio_intr(ah, 0, 0); - } -#endif - - /* - * Set the 32MHz reference clock on 5212 phy clock sleep register - * - * TODO: Find out how to switch to external 32Khz clock to save power - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); - ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); - ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); - - data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; - data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? - 0x00000f80 : 0x00001380 ; - ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); - data = 0; - } - - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); - ath5k_hw_reg_write(ah, 0x00003210, 0x811c); - ath5k_hw_reg_write(ah, 0x00000052, 0x8108); - if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413) - ath5k_hw_reg_write(ah, 0x00000004, 0x8120); - } - - /* - * Disable beacons and reset the register - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | - AR5K_BEACON_RESET_TSF); - - return 0; -} - -/* - * Reset chipset - */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) -{ - int ret; - u32 mask = val ? val : ~0U; - - ATH5K_TRACE(ah->ah_sc); - - /* Read-and-clear RX Descriptor Pointer*/ - ath5k_hw_reg_read(ah, AR5K_RXDP); - - /* - * Reset the device and wait until success - */ - ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); - - /* Wait at least 128 PCI clocks */ - udelay(15); - - if (ah->ah_version == AR5K_AR5210) { - val &= AR5K_RESET_CTL_CHIP; - mask &= AR5K_RESET_CTL_CHIP; - } else { - val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - } - - ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); - - /* - * Reset configuration register (for hw byte-swap). Note that this - * is only set for big endian. We do the necessary magic in - * AR5K_INIT_CFG. - */ - if ((val & AR5K_RESET_CTL_PCU) == 0) - ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); - - return ret; -} - -/* - * Power management functions - */ - -/* - * Sleep control - */ -int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, - bool set_chip, u16 sleep_duration) -{ - unsigned int i; - u32 staid, data; - - ATH5K_TRACE(ah->ah_sc); - staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); - - switch (mode) { - case AR5K_PM_AUTO: - staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; - /* fallthrough */ - case AR5K_PM_NETWORK_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE_ALLOW | - sleep_duration, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_FULL_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_AWAKE: - - staid &= ~AR5K_STA_ID1_PWR_SV; - - if (!set_chip) - goto commit; - - /* Preserve sleep duration */ - data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); - if( data & 0xffc00000 ){ - data = 0; - } else { - data = data & 0xfffcffff; - } - - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - udelay(15); - - for (i = 50; i > 0; i--) { - /* Check if the chip did wake up */ - if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & - AR5K_PCICFG_SPWR_DN) == 0) - break; - - /* Wait a bit and retry */ - udelay(200); - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - } - - /* Fail if the chip didn't wake up */ - if (i <= 0) - return -EIO; - - break; - - default: - return -EINVAL; - } - -commit: - ah->ah_power_mode = mode; - ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); - - return 0; -} - -/***********************\ - DMA Related Functions -\***********************/ - -/* - * Receive functions - */ - -/* - * Start DMA receive - */ -void ath5k_hw_start_rx(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); -} - -/* - * Stop DMA receive - */ -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); - - /* - * It may take some time to disable the DMA receive unit - */ - for (i = 2000; i > 0 && - (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; - i--) - udelay(10); - - return i ? 0 : -EBUSY; -} - -/* - * Get the address of the RX Descriptor - */ -u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah) -{ - return ath5k_hw_reg_read(ah, AR5K_RXDP); -} - -/* - * Set the address of the RX Descriptor - */ -void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr) -{ - ATH5K_TRACE(ah->ah_sc); - - /*TODO:Shouldn't we check if RX is enabled first ?*/ - ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); -} - -/* - * Transmit functions - */ - -/* - * Start DMA transmit for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) -{ - u32 tx_queue; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set the queue by type on 5210 - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; - break; - case AR5K_TX_QUEUE_BEACON: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BSR); - break; - case AR5K_TX_QUEUE_CAB: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | - AR5K_BCR_BDMAE, AR5K_BSR); - break; - default: - return -EINVAL; - } - /* Start queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* Return if queue is disabled */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) - return -EIO; - - /* Start queue */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); - } - - return 0; -} - -/* - * Stop DMA transmit for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) -{ - unsigned int i = 100; - u32 tx_queue, pending; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set by queue type - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - /* XXX Fix me... */ - tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, 0, AR5K_BSR); - break; - default: - return -EINVAL; - } - - /* Stop queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* - * Schedule TX disable and wait until queue is empty - */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); - - /*Check for pending frames*/ - do { - pending = ath5k_hw_reg_read(ah, - AR5K_QUEUE_STATUS(queue)) & - AR5K_QCU_STS_FRMPENDCNT; - udelay(100); - } while (--i && pending); - - /* Clear register */ - ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); - if (pending) - return -EBUSY; - } - - /* TODO: Check for success else return error */ - return 0; -} - -/* - * Get the address of the TX Descriptor for a specific queue - * (see also QCU/DCU functions) - */ -u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Get the transmit queue descriptor pointer from the selected queue - */ - /*5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return 0xffffffff; - } - } else { - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - return ath5k_hw_reg_read(ah, tx_reg); -} - -/* - * Set the address of the TX Descriptor for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Set the transmit queue descriptor pointer register by type - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return -EINVAL; - } - } else { - /* - * Set the transmit queue descriptor pointer for - * the selected queue on QCU for 5211+ - * (this won't work if the queue is still active) - */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) - return -EIO; - - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - /* Set descriptor pointer */ - ath5k_hw_reg_write(ah, phys_addr, tx_reg); - - return 0; -} - -/* - * Update tx trigger level - */ -int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) -{ - u32 trigger_level, imr; - int ret = -EIO; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Disable interrupts by setting the mask - */ - imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); - - /*TODO: Boundary check on trigger_level*/ - trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), - AR5K_TXCFG_TXFULL); - - if (!increase) { - if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) - goto done; - } else - trigger_level += - ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); - - /* - * Update trigger level on success - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); - else - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_TXFULL, trigger_level); - - ret = 0; - -done: - /* - * Restore interrupt mask - */ - ath5k_hw_set_intr(ah, imr); - - return ret; -} - -/* - * Interrupt handling - */ - -/* - * Check if we have pending interrupts - */ -bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_INTPEND); -} - -/* - * Get interrupt mask (ISR) - */ -int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Read interrupt status from the Interrupt Status register - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_ISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; - return -ENODEV; - } - } else { - /* - * Read interrupt status from the Read-And-Clear shadow register - * Note: PISR/SISR Not available on 5210 - */ - data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); - } - - /* - * Get abstract interrupt mask (driver-compatible) - */ - *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; - - if (unlikely(data == AR5K_INT_NOCARD)) - return -ENODEV; - - if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) - *interrupt_mask |= AR5K_INT_RX; - - if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR - | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) - *interrupt_mask |= AR5K_INT_TX; - - if (ah->ah_version != AR5K_AR5210) { - /*HIU = Host Interface Unit (PCI etc)*/ - if (unlikely(data & (AR5K_ISR_HIUERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /*Beacon Not Ready*/ - if (unlikely(data & (AR5K_ISR_BNR))) - *interrupt_mask |= AR5K_INT_BNR; - } - - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successfull assoc + some jiffies. - */ -#if 0 - interrupt_mask &= ~AR5K_INT_BMISS; -#endif - - /* - * In case we didn't handle anything, - * print the register value. - */ - if (unlikely(*interrupt_mask == 0 && net_ratelimit())) - ATH5K_PRINTF("0x%08x\n", data); - - return 0; -} - -/* - * Set interrupt mask - */ -enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) -{ - enum ath5k_int old_mask, int_mask; - - /* - * Disable card interrupts to prevent any race conditions - * (they will be re-enabled afterwards). - */ - ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - old_mask = ah->ah_imr; - - /* - * Add additional, chipset-dependent interrupt mask flags - * and write them to the IMR (interrupt mask register). - */ - int_mask = new_mask & AR5K_INT_COMMON; - - if (new_mask & AR5K_INT_RX) - int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | - AR5K_IMR_RXDESC; - - if (new_mask & AR5K_INT_TX) - int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | - AR5K_IMR_TXURN; - - if (ah->ah_version != AR5K_AR5210) { - if (new_mask & AR5K_INT_FATAL) { - int_mask |= AR5K_IMR_HIUERR; - AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | - AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); - } - } - - ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); - - /* Store new interrupt mask */ - ah->ah_imr = new_mask; - - /* ..re-enable interrupts */ - ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - return old_mask; -} - - -/*************************\ - EEPROM access functions -\*************************/ - -/* - * Read from eeprom - */ -static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) -{ - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - /* - * Initialize EEPROM access - */ - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_READ); - } - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_RDDONE) { - if (status & AR5K_EEPROM_STAT_RDERR) - return -EIO; - *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & - 0xffff); - return 0; - } - udelay(15); - } - - return -ETIMEDOUT; -} - -/* - * Write to eeprom - currently disabled, use at your own risk - */ -#if 0 -static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) -{ - - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Initialize eeprom access - */ - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - } else { - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_RESET); - } - - /* - * Write data to data register - */ - - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_WRITE); - } - - /* - * Check status - */ - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_WRDONE) { - if (status & AR5K_EEPROM_STAT_WRERR) - return EIO; - return 0; - } - udelay(15); - } - - ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!"); - return -EIO; -} -#endif - -/* - * Translate binary channel representation in EEPROM to frequency - */ -static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode) -{ - u16 val; - - if (bin == AR5K_EEPROM_CHANNEL_DIS) - return bin; - - if (mode == AR5K_EEPROM_MODE_11A) { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) - val = (5 * bin) + 4800; - else - val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : - (bin * 10) + 5100; - } else { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) - val = bin + 2300; - else - val = bin + 2400; - } - - return val; -} - -/* - * Read antenna infos from eeprom - */ -static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret, i = 0; - - AR5K_EEPROM_READ(o++, val); - ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; - ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; - ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - /* Get antenna modes */ - ah->ah_antenna[mode][0] = - (ee->ee_ant_control[mode][0] << 4) | 0x1; - ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = - ee->ee_ant_control[mode][1] | - (ee->ee_ant_control[mode][2] << 6) | - (ee->ee_ant_control[mode][3] << 12) | - (ee->ee_ant_control[mode][4] << 18) | - (ee->ee_ant_control[mode][5] << 24); - ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = - ee->ee_ant_control[mode][6] | - (ee->ee_ant_control[mode][7] << 6) | - (ee->ee_ant_control[mode][8] << 12) | - (ee->ee_ant_control[mode][9] << 18) | - (ee->ee_ant_control[mode][10] << 24); - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Read supported modes from eeprom - */ -static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; - ee->ee_thr_62[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; - ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; - - AR5K_EEPROM_READ(o++, val); - ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; - - if ((val & 0xff) & 0x80) - ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); - else - ee->ee_noise_floor_thr[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_noise_floor_thr[mode] = - mode == AR5K_EEPROM_MODE_11A ? -54 : -1; - - AR5K_EEPROM_READ(o++, val); - ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; - ee->ee_x_gain[mode] = (val >> 1) & 0xf; - ee->ee_xpd[mode] = val & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) - ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(o++, val); - ee->ee_false_detect[mode] = (val >> 6) & 0x7f; - - if (mode == AR5K_EEPROM_MODE_11A) - ee->ee_xr_power[mode] = val & 0x3f; - else { - ee->ee_ob[mode][0] = val & 0x7; - ee->ee_db[mode][0] = (val >> 3) & 0x7; - } - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { - ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; - ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; - } else { - ee->ee_i_gain[mode] = (val >> 13) & 0x7; - - AR5K_EEPROM_READ(o++, val); - ee->ee_i_gain[mode] |= (val << 3) & 0x38; - - if (mode == AR5K_EEPROM_MODE_11G) - ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && - mode == AR5K_EEPROM_MODE_11A) { - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && - mode == AR5K_EEPROM_MODE_11G) - ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Initialize eeprom & capabilities structs - */ -static int ath5k_eeprom_init(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - unsigned int mode, i; - int ret; - u32 offset; - u16 val; - - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; - - /* - * Read values from EEPROM and store them in the capability structure - */ - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); - - /* Return if we have an old EEPROM */ - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) - return 0; - -#ifdef notyet - /* - * Validate the checksum of the EEPROM date. There are some - * devices with invalid EEPROMs. - */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { - AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); - cksum ^= val; - } - if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); - return -EIO; - } -#endif - - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), - ee_ant_gain); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; - - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; - } - - /* - * Get conformance test limit values - */ - offset = AR5K_EEPROM_CTL(ah->ah_ee_version); - ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); - - for (i = 0; i < ee->ee_ctls; i++) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_ctl[i] = (val >> 8) & 0xff; - ee->ee_ctl[i + 1] = val & 0xff; - } - - /* - * Get values for 802.11a (5GHz) - */ - mode = AR5K_EEPROM_MODE_11A; - - ee->ee_turbo_max_power[mode] = - AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); - - offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_margin_tx_rx[mode] = val & 0x3f; - } - - /* - * Get values for 802.11b (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11B; - offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); - - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - /* - * Get values for 802.11g (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11G; - offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); - - AR5K_EEPROM_READ(offset++, val); - ee->ee_turbo_max_power[mode] = val & 0x7f; - ee->ee_xr_power[mode] = (val >> 7) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cck_ofdm_gain_delta = val & 0xff; - } - } - - /* - * Read 5GHz EEPROM channels - */ - - return 0; -} - -/* - * Read the MAC address from eeprom - */ -static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) -{ - u8 mac_d[ETH_ALEN]; - u32 total, offset; - u16 data; - int octet, ret; - - memset(mac, 0, ETH_ALEN); - memset(mac_d, 0, ETH_ALEN); - - ret = ath5k_hw_eeprom_read(ah, 0x20, &data); - if (ret) - return ret; - - for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { - ret = ath5k_hw_eeprom_read(ah, offset, &data); - if (ret) - return ret; - - total += data; - mac_d[octet + 1] = data & 0xff; - mac_d[octet] = data >> 8; - octet += 2; - } - - memcpy(mac, mac_d, ETH_ALEN); - - if (!total || total == 3 * 0xffff) - return -EINVAL; - - return 0; -} - -/* - * Fill the capabilities struct - */ -static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) -{ - u16 ee_header; - - ATH5K_TRACE(ah->ah_sc); - /* Capabilities stored in the EEPROM */ - ee_header = ah->ah_capabilities.cap_eeprom.ee_header; - - if (ah->ah_version == AR5K_AR5210) { - /* - * Set radio capabilities - * (The AR5110 only supports the middle 5GHz band) - */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5120; - ah->ah_capabilities.cap_range.range_5ghz_max = 5430; - ah->ah_capabilities.cap_range.range_2ghz_min = 0; - ah->ah_capabilities.cap_range.range_2ghz_max = 0; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); - } else { - /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the - * XXX current ieee80211 implementation because the IEEE - * XXX channel mapping does not support negative channel - * XXX numbers (2312MHz is channel -19). Of course, this - * XXX doesn't matter because these channels are out of range - * XXX but some regulation domains like MKK (Japan) will - * XXX support frequencies somewhere around 4.8GHz. - */ - - /* - * Set radio capabilities - */ - - if (AR5K_EEPROM_HDR_11A(ee_header)) { - ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */ - ah->ah_capabilities.cap_range.range_5ghz_max = 6100; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, - ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, - ah->ah_capabilities.cap_mode); - if (ah->ah_version == AR5K_AR5212) - __set_bit(AR5K_MODE_11G_TURBO, - ah->ah_capabilities.cap_mode); - } - - /* Enable 802.11b if a 2GHz capable radio (2111/5112) is - * connected */ - if (AR5K_EEPROM_HDR_11B(ee_header) || - AR5K_EEPROM_HDR_11G(ee_header)) { - ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */ - ah->ah_capabilities.cap_range.range_2ghz_max = 2732; - - if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(AR5K_MODE_11B, - ah->ah_capabilities.cap_mode); - - if (AR5K_EEPROM_HDR_11G(ee_header)) - __set_bit(AR5K_MODE_11G, - ah->ah_capabilities.cap_mode); - } - } - - /* GPIO */ - ah->ah_gpio_npins = AR5K_NUM_GPIO; - - /* Set number of supported TX queues */ - if (ah->ah_version == AR5K_AR5210) - ah->ah_capabilities.cap_queues.q_tx_num = - AR5K_NUM_TX_QUEUES_NOQCU; - else - ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; - - return 0; -} - -/*********************************\ - Protocol Control Unit Functions -\*********************************/ - -/* - * Set Operation mode - */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah) -{ - u32 pcu_reg, beacon_reg, low_id, high_id; - - pcu_reg = 0; - beacon_reg = 0; - - ATH5K_TRACE(ah->ah_sc); - - switch (ah->ah_op_mode) { - case IEEE80211_IF_TYPE_IBSS: - pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - beacon_reg |= AR5K_BCR_ADHOC; - break; - - case IEEE80211_IF_TYPE_AP: - pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - beacon_reg |= AR5K_BCR_AP; - break; - - case IEEE80211_IF_TYPE_STA: - pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_PWR_SV : 0); - case IEEE80211_IF_TYPE_MNTR: - pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - break; - - default: - return -EINVAL; - } - - /* - * Set PCU registers - */ - low_id = AR5K_LOW_ID(ah->ah_sta_id); - high_id = AR5K_HIGH_ID(ah->ah_sta_id); - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); - - /* - * Set Beacon Control Register on 5210 - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); - - return 0; -} - -/* - * BSSID Functions - */ - -/* - * Get station id - */ -void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(mac, ah->ah_sta_id, ETH_ALEN); -} - -/* - * Set station id - */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Set new station ID */ - memcpy(ah->ah_sta_id, mac, ETH_ALEN); - - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac); - - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); - - return 0; -} - -/* - * Set BSSID - */ -void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) -{ - u32 low_id, high_id; - u16 tim_offset = 0; - - /* - * Set simple BSSID mask on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); - } - - /* - * Set BSSID which triggers the "SME Join" operation - */ - low_id = AR5K_LOW_ID(bssid); - high_id = AR5K_HIGH_ID(bssid); - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); - ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << - AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); - - if (assoc_id == 0) { - ath5k_hw_disable_pspoll(ah); - return; - } - - AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, - tim_offset ? tim_offset + 4 : 0); - - ath5k_hw_enable_pspoll(ah, NULL, 0); -} -/** - * ath5k_hw_set_bssid_mask - set common bits we should listen to - * - * The bssid_mask is a utility used by AR5212 hardware to inform the hardware - * which bits of the interface's MAC address should be looked at when trying - * to decide which packets to ACK. In station mode every bit matters. In AP - * mode with a single BSS every bit matters as well. In AP mode with - * multiple BSSes not every bit matters. - * - * @ah: the &struct ath5k_hw - * @mask: the bssid_mask, a u8 array of size ETH_ALEN - * - * Note that this is a simple filter and *does* not filter out all - * relevant frames. Some non-relevant frames will get through, probability - * jocks are welcomed to compute. - * - * When handling multiple BSSes (or VAPs) you can get the BSSID mask by - * computing the set of: - * - * ~ ( MAC XOR BSSID ) - * - * When you do this you are essentially computing the common bits. Later it - * is assumed the harware will "and" (&) the BSSID mask with the MAC address - * to obtain the relevant bits which should match on the destination frame. - * - * Simple example: on your card you have have two BSSes you have created with - * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. - * There is another BSSID-03 but you are not part of it. For simplicity's sake, - * assuming only 4 bits for a mac address and for BSSIDs you can then have: - * - * \ - * MAC: 0001 | - * BSSID-01: 0100 | --> Belongs to us - * BSSID-02: 1001 | - * / - * ------------------- - * BSSID-03: 0110 | --> External - * ------------------- - * - * Our bssid_mask would then be: - * - * On loop iteration for BSSID-01: - * ~(0001 ^ 0100) -> ~(0101) - * -> 1010 - * bssid_mask = 1010 - * - * On loop iteration for BSSID-02: - * bssid_mask &= ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(1001) - * bssid_mask = (1010) & (0110) - * bssid_mask = 0010 - * - * A bssid_mask of 0010 means "only pay attention to the second least - * significant bit". This is because its the only bit common - * amongst the MAC and all BSSIDs we support. To findout what the real - * common bit is we can simply "&" the bssid_mask now with any BSSID we have - * or our MAC address (we assume the hardware uses the MAC address). - * - * Now, suppose there's an incoming frame for BSSID-03: - * - * IFRAME-01: 0110 - * - * An easy eye-inspeciton of this already should tell you that this frame - * will not pass our check. This is beacuse the bssid_mask tells the - * hardware to only look at the second least significant bit and the - * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB - * as 1, which does not match 0. - * - * So with IFRAME-01 we *assume* the hardware will do: - * - * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; - * --> allow = (0010) == 0000 ? 1 : 0; - * --> allow = 0 - * - * Lets now test a frame that should work: - * - * IFRAME-02: 0001 (we should allow) - * - * allow = (0001 & 1010) == 1010 - * - * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; - * --> allow = (0010) == (0010) - * --> allow = 1 - * - * Other examples: - * - * IFRAME-03: 0100 --> allowed - * IFRAME-04: 1001 --> allowed - * IFRAME-05: 1101 --> allowed but its not for us!!! - * - */ -int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) -{ - u32 low_id, high_id; - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5212) { - low_id = AR5K_LOW_ID(mask); - high_id = AR5K_HIGH_ID(mask); - - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); - - return 0; - } - - return -EIO; -} - -/* - * Receive start/stop functions - */ - -/* - * Start receive on PCU - */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); - - /* TODO: ANI Support */ -} - -/* - * Stop receive on PCU - */ -void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); - - /* TODO: ANI Support */ -} - -/* - * RX Filter functions - */ - -/* - * Set multicast filter - */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) -{ - ATH5K_TRACE(ah->ah_sc); - /* Set the multicat filter */ - ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); - ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); -} - -/* - * Set multicast filter by index - */ -int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Clear Multicast filter by index - */ -int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Get current rx filter - */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) -{ - u32 data, filter = 0; - - ATH5K_TRACE(ah->ah_sc); - filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); - - /*Radar detection for 5212*/ - if (ah->ah_version == AR5K_AR5212) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); - - if (data & AR5K_PHY_ERR_FIL_RADAR) - filter |= AR5K_RX_FILTER_RADARERR; - if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) - filter |= AR5K_RX_FILTER_PHYERR; - } - - return filter; -} - -/* - * Set rx filter - */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) -{ - u32 data = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Set PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - if (filter & AR5K_RX_FILTER_RADARERR) - data |= AR5K_PHY_ERR_FIL_RADAR; - if (filter & AR5K_RX_FILTER_PHYERR) - data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; - } - - /* - * The AR5210 uses promiscous mode to detect radar activity - */ - if (ah->ah_version == AR5K_AR5210 && - (filter & AR5K_RX_FILTER_RADARERR)) { - filter &= ~AR5K_RX_FILTER_RADARERR; - filter |= AR5K_RX_FILTER_PROM; - } - - /*Zero length DMA*/ - if (data) - AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - - /*Write RX Filter register*/ - ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); - - /*Write PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) - ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); - -} - -/* - * Beacon related functions - */ - -/* - * Get a 32bit TSF - */ -u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_TSF_L32); -} - -/* - * Get the full 64bit TSF - */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) -{ - u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); -} - -/* - * Force a TSF reset - */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); -} - -/* - * Initialize beacon timers - */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) -{ - u32 timer1, timer2, timer3; - - ATH5K_TRACE(ah->ah_sc); - /* - * Set the additional timers by mode - */ - switch (ah->ah_op_mode) { - case IEEE80211_IF_TYPE_STA: - if (ah->ah_version == AR5K_AR5210) { - timer1 = 0xffffffff; - timer2 = 0xffffffff; - } else { - timer1 = 0x0000ffff; - timer2 = 0x0007ffff; - } - break; - - default: - timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; - timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; - } - - timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); - - /* - * Set the beacon register and enable all timers. - * (next beacon, DMA beacon, software beacon, ATIM window time) - */ - ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); - ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); - ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); - ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); - - ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | - AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), - AR5K_BEACON); -} - -#if 0 -/* - * Set beacon timers - */ -int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, - const struct ath5k_beacon_state *state) -{ - u32 cfp_period, next_cfp, dtim, interval, next_beacon; - - /* - * TODO: should be changed through *state - * review struct ath5k_beacon_state struct - * - * XXX: These are used for cfp period bellow, are they - * ok ? Is it O.K. for tsf here to be 0 or should we use - * get_tsf ? - */ - u32 dtim_count = 0; /* XXX */ - u32 cfp_count = 0; /* XXX */ - u32 tsf = 0; /* XXX */ - - ATH5K_TRACE(ah->ah_sc); - /* Return on an invalid beacon state */ - if (state->bs_interval < 1) - return -EINVAL; - - interval = state->bs_interval; - dtim = state->bs_dtim_period; - - /* - * PCF support? - */ - if (state->bs_cfp_period > 0) { - /* - * Enable PCF mode and set the CFP - * (Contention Free Period) and timer registers - */ - cfp_period = state->bs_cfp_period * state->bs_dtim_period * - state->bs_interval; - next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * - state->bs_interval; - - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); - ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, - AR5K_CFP_DUR); - ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : - next_cfp)) << 3, AR5K_TIMER2); - } else { - /* Disable PCF mode */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - } - - /* - * Enable the beacon timer register - */ - ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); - - /* - * Start the beacon timers - */ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~ - (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | - AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, - AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, - AR5K_BEACON_PERIOD), AR5K_BEACON); - - /* - * Write new beacon miss threshold, if it appears to be valid - * XXX: Figure out right values for min <= bs_bmiss_threshold <= max - * and return if its not in range. We can test this by reading value and - * setting value to a largest value and seeing which values register. - */ - - AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, - state->bs_bmiss_threshold); - - /* - * Set sleep control register - * XXX: Didn't find this in 5210 code but since this register - * exists also in ar5k's 5210 headers i leave it as common code. - */ - AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, - (state->bs_sleep_duration - 3) << 3); - - /* - * Set enhanced sleep registers on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - if (state->bs_sleep_duration > state->bs_interval && - roundup(state->bs_sleep_duration, interval) == - state->bs_sleep_duration) - interval = state->bs_sleep_duration; - - if (state->bs_sleep_duration > dtim && (dtim == 0 || - roundup(state->bs_sleep_duration, dtim) == - state->bs_sleep_duration)) - dtim = state->bs_sleep_duration; - - if (interval > dtim) - return -EINVAL; - - next_beacon = interval == dtim ? state->bs_next_dtim : - state->bs_next_beacon; - - ath5k_hw_reg_write(ah, - AR5K_REG_SM((state->bs_next_dtim - 3) << 3, - AR5K_SLEEP0_NEXT_DTIM) | - AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | - AR5K_SLEEP0_ENH_SLEEP_EN | - AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); - - ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, - AR5K_SLEEP1_NEXT_TIM) | - AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); - - ath5k_hw_reg_write(ah, - AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | - AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); - } - - return 0; -} - -/* - * Reset beacon timers - */ -void ath5k_hw_reset_beacon(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /* - * Disable beacon timer - */ - ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - - /* - * Disable some beacon register values - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); -} - -/* - * Wait for beacon queue to finish - */ -int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) -{ - unsigned int i; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* 5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - /* - * Wait for beaconn queue to finish by checking - * Control Register and Beacon Status Register. - */ - for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { - if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) - || - !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) - break; - udelay(10); - } - - /* Timeout... */ - if (i <= 0) { - /* - * Re-schedule the beacon queue - */ - ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BCR); - - return -EIO; - } - ret = 0; - } else { - /*5211/5212*/ - ret = ath5k_hw_register_timeout(ah, - AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), - AR5K_QCU_STS_FRMPENDCNT, 0, false); - - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) - return -EIO; - } - - return ret; -} -#endif - -/* - * Update mib counters (statistics) - */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, - struct ieee80211_low_level_stats *stats) -{ - ATH5K_TRACE(ah->ah_sc); - - /* Read-And-Clear */ - stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); - stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); - stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); - stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); - - /* XXX: Should we use this to track beacon count ? - * -we read it anyway to clear the register */ - ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); - - /* Reset profile count registers on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); - } -} - -/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs - * - * @ah: the &struct ath5k_hw - * @high: determines if to use low bit rate or now - */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) -{ - if (ah->ah_version != AR5K_AR5212) - return; - else { - u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; - if (high) - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); - } -} - - -/* - * ACK/CTS Timeouts - */ - -/* - * Set ACK timeout on PCU - */ -int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/* - * Read the ACK timeout from PCU - */ -unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); -} - -/* - * Set CTS timeout on PCU - */ -int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/* - * Read CTS timeout from PCU - */ -unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); -} - -/* - * Key table (WEP) functions - */ - -int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); - - /* - * Set NULL encryption on AR5212+ - * - * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) - * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 - * - * Note2: Windows driver (ndiswrapper) sets this to - * 0x00000714 instead of 0x00000007 - */ - if (ah->ah_version > AR5K_AR5211) - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(entry)); - - return 0; -} - -int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* Check the validation flag at the end of the entry */ - return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & - AR5K_KEYTABLE_VALID; -} - -int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, - const struct ieee80211_key_conf *key, const u8 *mac) -{ - unsigned int i; - __le32 key_v[5] = {}; - u32 keytype; - - ATH5K_TRACE(ah->ah_sc); - - /* key->keylen comes in from mac80211 in bytes */ - - if (key->keylen > AR5K_KEYTABLE_SIZE / 8) - return -EOPNOTSUPP; - - switch (key->keylen) { - /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ - case 40 / 8: - memcpy(&key_v[0], key->key, 5); - keytype = AR5K_KEYTABLE_TYPE_40; - break; - - /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ - case 104 / 8: - memcpy(&key_v[0], &key->key[0], 6); - memcpy(&key_v[2], &key->key[6], 6); - memcpy(&key_v[4], &key->key[12], 1); - keytype = AR5K_KEYTABLE_TYPE_104; - break; - /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ - case 128 / 8: - memcpy(&key_v[0], &key->key[0], 6); - memcpy(&key_v[2], &key->key[6], 6); - memcpy(&key_v[4], &key->key[12], 4); - keytype = AR5K_KEYTABLE_TYPE_128; - break; - - default: - return -EINVAL; /* shouldn't happen */ - } - - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(entry, i)); - - ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); - - return ath5k_hw_set_key_lladdr(ah, entry, mac); -} - -int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Invalid entry (key table overflow) */ - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* MAC may be NULL if it's a broadcast key. In this case no need to - * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ - if (unlikely(mac == NULL)) { - low_id = 0xffffffff; - high_id = 0xffff | AR5K_KEYTABLE_VALID; - } else { - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; - } - - ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); - ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); - - return 0; -} - - -/********************************************\ -Queue Control Unit, DFS Control Unit Functions -\********************************************/ - -/* - * Initialize a transmit queue - */ -int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, - struct ath5k_txq_info *queue_info) -{ - unsigned int queue; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Get queue by type - */ - /*5210 only has 2 queues*/ - if (ah->ah_version == AR5K_AR5210) { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; - break; - default: - return -EINVAL; - } - } else { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; - ah->ah_txq[queue].tqi_type != - AR5K_TX_QUEUE_INACTIVE; queue++) { - - if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) - return -EINVAL; - } - break; - case AR5K_TX_QUEUE_UAPSD: - queue = AR5K_TX_QUEUE_ID_UAPSD; - break; - case AR5K_TX_QUEUE_BEACON: - queue = AR5K_TX_QUEUE_ID_BEACON; - break; - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_CAB; - break; - case AR5K_TX_QUEUE_XR_DATA: - if (ah->ah_version != AR5K_AR5212) - ATH5K_ERR(ah->ah_sc, - "XR data queues only supported in" - " 5212!\n"); - queue = AR5K_TX_QUEUE_ID_XR_DATA; - break; - default: - return -EINVAL; - } - } - - /* - * Setup internal queue structure - */ - memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); - ah->ah_txq[queue].tqi_type = queue_type; - - if (queue_info != NULL) { - queue_info->tqi_type = queue_type; - ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info); - if (ret) - return ret; - } - /* - * We use ah_txq_status to hold a temp value for - * the Secondary interrupt mask registers on 5211+ - * check out ath5k_hw_reset_tx_queue - */ - AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); - - return queue; -} - -/* - * Setup a transmit queue - */ -int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); - - /*XXX: Is this supported on 5210 ?*/ - if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && - ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || - (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || - queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) - ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; - - return 0; -} - -/* - * Get properties for a specific transmit queue - */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, - struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); - return 0; -} - -/* - * Set a transmit queue inactive - */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - ATH5K_TRACE(ah->ah_sc); - if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) - return; - - /* This queue will be skipped in further operations */ - ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; - /*For SIMR setup*/ - AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); -} - -/* - * Set DFS params for a transmit queue - */ -int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - u32 cw_min, cw_max, retry_lg, retry_sh; - struct ath5k_txq_info *tq = &ah->ah_txq[queue]; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - tq = &ah->ah_txq[queue]; - - if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) - return 0; - - if (ah->ah_version == AR5K_AR5210) { - /* Only handle data queues, others will be ignored */ - if (tq->tqi_type != AR5K_TX_QUEUE_DATA) - return 0; - - /* Set Slot time */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, - AR5K_SLOT_TIME); - /* Set ACK_CTS timeout */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : - AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); - /* Set Transmit Latency */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_TRANSMIT_LATENCY_TURBO : - AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); - /* Set IFS0 */ - if (ah->ah_turbo) - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME_TURBO) << - AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, - AR5K_IFS0); - else - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | - AR5K_INIT_SIFS, AR5K_IFS0); - - /* Set IFS1 */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_PROTO_TIME_CNTRL_TURBO : - AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set AR5K_PHY_SETTLING */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x1C, - AR5K_PHY_SETTLING); - /* Set Frame Control Register */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | - AR5K_PHY_TURBO_SHORT | 0x2020) : - (AR5K_PHY_FRAME_CTL_INI | 0x1020), - AR5K_PHY_FRAME_CTL_5210); - } - - /* - * Calculate cwmin/max by channel mode - */ - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; - ah->ah_aifs = AR5K_TUNE_AIFS; - /*XR is only supported on 5212*/ - if (IS_CHAN_XR(ah->ah_current_channel) && - ah->ah_version == AR5K_AR5212) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; - ah->ah_aifs = AR5K_TUNE_AIFS_XR; - /*B mode is not supported on 5210*/ - } else if (IS_CHAN_B(ah->ah_current_channel) && - ah->ah_version != AR5K_AR5210) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; - ah->ah_aifs = AR5K_TUNE_AIFS_11B; - } - - cw_min = 1; - while (cw_min < ah->ah_cw_min) - cw_min = (cw_min << 1) | 1; - - cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : - ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); - cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : - ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); - - /* - * Calculate and set retry limits - */ - if (ah->ah_software_retry) { - /* XXX Need to test this */ - retry_lg = ah->ah_limit_tx_retries; - retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? - AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; - } else { - retry_lg = AR5K_INIT_LG_RETRY; - retry_sh = AR5K_INIT_SH_RETRY; - } - - /*No QCU/DCU [5210]*/ - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, - (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) - | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_NODCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_NODCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), - AR5K_NODCU_RETRY_LMT); - } else { - /*QCU/DCU [5211+]*/ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_DCU_RETRY_LMT_SLG_RETRY) | - AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_DCU_RETRY_LMT_SSH_RETRY) | - AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | - AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), - AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); - - /*===Rest is also for QCU/DCU only [5211+]===*/ - - /* - * Set initial content window (cw_min/cw_max) - * and arbitrated interframe space (aifs)... - */ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | - AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | - AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, - AR5K_DCU_LCL_IFS_AIFS), - AR5K_QUEUE_DFS_LOCAL_IFS(queue)); - - /* - * Set misc registers - */ - ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, - AR5K_QUEUE_MISC(queue)); - - if (tq->tqi_cbr_period) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, - AR5K_QCU_CBRCFG_INTVAL) | - AR5K_REG_SM(tq->tqi_cbr_overflow_limit, - AR5K_QCU_CBRCFG_ORN_THRES), - AR5K_QUEUE_CBRCFG(queue)); - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_CBR); - if (tq->tqi_cbr_overflow_limit) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBR_THRES_ENABLE); - } - - if (tq->tqi_ready_time) - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, - AR5K_QCU_RDYTIMECFG_INTVAL) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - - if (tq->tqi_burst_time) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, - AR5K_DCU_CHAN_TIME_DUR) | - AR5K_DCU_CHAN_TIME_ENABLE, - AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_RDY_VEOL_POLICY); - } - - if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, - AR5K_QUEUE_DFS_MISC(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, - AR5K_QUEUE_DFS_MISC(queue)); - - /* - * Set registers by queue type - */ - switch (tq->tqi_type) { - case AR5K_TX_QUEUE_BEACON: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP_BCN | - AR5K_QCU_MISC_BCN_ENABLE); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S) | - AR5K_DCU_MISC_POST_FR_BKOFF_DIS | - AR5K_DCU_MISC_BCN_ENABLE); - - ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - - (AR5K_TUNE_SW_BEACON_RESP - - AR5K_TUNE_DMA_BEACON_RESP) - - AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - break; - - case AR5K_TX_QUEUE_CAB: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP | - AR5K_QCU_MISC_CBREXP_BCN); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S)); - break; - - case AR5K_TX_QUEUE_UAPSD: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBREXP); - break; - - case AR5K_TX_QUEUE_DATA: - default: - break; - } - - /* - * Enable interrupts for this tx queue - * in the secondary interrupt mask registers - */ - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); - - - /* Update secondary interrupt mask registers */ - ah->ah_txq_imr_txok &= ah->ah_txq_status; - ah->ah_txq_imr_txerr &= ah->ah_txq_status; - ah->ah_txq_imr_txurn &= ah->ah_txq_status; - ah->ah_txq_imr_txdesc &= ah->ah_txq_status; - ah->ah_txq_imr_txeol &= ah->ah_txq_status; - - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, - AR5K_SIMR0_QCU_TXOK) | - AR5K_REG_SM(ah->ah_txq_imr_txdesc, - AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, - AR5K_SIMR1_QCU_TXERR) | - AR5K_REG_SM(ah->ah_txq_imr_txeol, - AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, - AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); - } - - return 0; -} - -/* - * Get number of pending frames - * for a specific queue [5211+] - */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return false; - - /* XXX: How about AR5K_CFG_TXCNT ? */ - if (ah->ah_version == AR5K_AR5210) - return false; - - return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; -} - -/* - * Set slot time - */ -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) -{ - ATH5K_TRACE(ah->ah_sc); - if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) - return -EINVAL; - - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, - ah->ah_turbo), AR5K_SLOT_TIME); - else - ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); - - return 0; -} - -/* - * Get slot time - */ -unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - if (ah->ah_version == AR5K_AR5210) - return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, - AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); - else - return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; -} - - -/******************************\ - Hardware Descriptor Functions -\******************************/ - -/* - * TX Descriptor - */ - -/* - * Initialize the 2-word tx descriptor on 5210/5211 - */ -static int -ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, - unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, - unsigned int key_index, unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, unsigned int rtscts_duration) -{ - u32 frame_type; - struct ath5k_hw_2w_tx_ctl *tx_ctl; - unsigned int frame_len; - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; - - if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if(type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; - - /* - * Verify and set header length - * XXX: I only found that on 5210 code, does it work on 5211 ? - */ - if (ah->ah_version == AR5K_AR5210) { - if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) - return -EINVAL; - tx_ctl->tx_control_0 |= - AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); - } - - /*Diferences between 5210-5211*/ - if (ah->ah_version == AR5K_AR5210) { - switch (type) { - case AR5K_PKT_TYPE_BEACON: - case AR5K_PKT_TYPE_PROBE_RESP: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; - case AR5K_PKT_TYPE_PIFS: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; - default: - frame_type = type /*<< 2 ?*/; - } - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - } else { - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | - AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= - AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); - } -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) \ - tx_ctl->tx_control_##_c |= \ - AR5K_2W_TX_DESC_CTL##_c##_##_flag - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= - AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= - AR5K_REG_SM(key_index, - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS Duration [5210 ?] - */ - if ((ah->ah_version == AR5K_AR5210) && - (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) - tx_ctl->tx_control_1 |= rtscts_duration & - AR5K_2W_TX_DESC_CTL1_RTS_DURATION; - - return 0; -} - -/* - * Initialize the 4-word tx descriptor on 5212 - */ -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, - struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, - enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, - unsigned int tx_tries0, unsigned int key_index, - unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate, - unsigned int rtscts_duration) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - unsigned int frame_len; - - ATH5K_TRACE(ah->ah_sc); - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; - - if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if(type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | - AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= AR5K_REG_SM(type, - AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); - tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); - tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) \ - tx_ctl->tx_control_##_c |= \ - AR5K_4W_TX_DESC_CTL##_c##_##_flag - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(0, CTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, - AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS - */ - if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { - if ((flags & AR5K_TXDESC_RTSENA) && - (flags & AR5K_TXDESC_CTSENA)) - return -EINVAL; - tx_ctl->tx_control_2 |= rtscts_duration & - AR5K_4W_TX_DESC_CTL2_RTS_DURATION; - tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, - AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); - } - - return 0; -} - -/* - * Initialize a 4-word multirate tx descriptor on 5212 - */ -static int -ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, - unsigned int tx_rate3, u_int tx_tries3) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - - /* - * Rates can be 0 as long as the retry count is 0 too. - * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to - * avoid this. - */ - if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || - (tx_rate2 == 0 && tx_tries2 != 0) || - (tx_rate3 == 0 && tx_tries3 != 0))) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - if (ah->ah_version == AR5K_AR5212) { - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - -#define _XTX_TRIES(_n) \ - if (tx_tries##_n) { \ - tx_ctl->tx_control_2 |= \ - AR5K_REG_SM(tx_tries##_n, \ - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ - tx_ctl->tx_control_3 |= \ - AR5K_REG_SM(tx_rate##_n, \ - AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ - } - - _XTX_TRIES(1); - _XTX_TRIES(2); - _XTX_TRIES(3); - -#undef _XTX_TRIES - - return 1; - } - - return 0; -} - -/* - * Proccess the tx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_2w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - tx_status = &desc->ud.ds_tx5210.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - /*TODO: ts->ts_virtcol + test*/ - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = 1; - ts->ts_status = 0; - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0, - AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - - if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * Proccess a tx descriptor on 5212 - */ -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - tx_status = &desc->ud.ds_tx5212.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = (tx_status->tx_status_1 & - AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; - ts->ts_status = 0; - - switch (AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { - case 0: - ts->ts_rate = tx_ctl->tx_control_3 & - AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - break; - case 1: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - break; - case 2: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); - break; - case 3: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); - break; - } - - if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * RX Descriptor - */ - -/* - * Initialize an rx descriptor - */ -int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags) -{ - struct ath5k_hw_rx_ctl *rx_ctl; - - ATH5K_TRACE(ah->ah_sc); - rx_ctl = &desc->ud.ds_rx.rx_ctl; - - /* - * Clear the descriptor - * If we don't clean the status descriptor, - * while scanning we get too many results, - * most of them virtual, after some secs - * of scanning system hangs. M.F. - */ - memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); - - /* Setup descriptor */ - rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; - if (unlikely(rx_ctl->rx_control_1 != size)) - return -EINVAL; - - if (flags & AR5K_RXDESC_INTREQ) - rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; - - return 0; -} - -/* - * Proccess the rx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* No frame received / not ready */ - if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE) - == 0)) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE; - /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if ((rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) - rs->rs_status |= AR5K_RXERR_FIFO; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); - } - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - } - - return 0; -} - -/* - * Proccess the rx status descriptor on 5212 - */ -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - struct ath5k_hw_rx_error *rx_err; - - ATH5K_TRACE(ah->ah_sc); - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* Overlay on error */ - rx_err = &desc->ud.ds_rx.u.rx_err; - - /* No frame received / not ready */ - if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE) - == 0)) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE; - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if ((rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, - AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); - } - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) - rs->rs_status |= AR5K_RXERR_MIC; - } - - return 0; -} - - -/****************\ - GPIO Functions -\****************/ - -/* - * Set led state - */ -void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) -{ - u32 led; - /*5210 has different led mode handling*/ - u32 led_5210; - - ATH5K_TRACE(ah->ah_sc); - - /*Reset led status*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); - - /* - * Some blinking values, define at your wish - */ - switch (state) { - case AR5K_LED_SCAN: - case AR5K_LED_AUTH: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; - led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; - break; - - case AR5K_LED_INIT: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - - case AR5K_LED_ASSOC: - case AR5K_LED_RUN: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; - led_5210 = AR5K_PCICFG_LED_ASSOC; - break; - - default: - led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - } - - /*Write new status to the register*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); -} - -/* - * Set GPIO outputs - */ -int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ - AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Set GPIO inputs - */ -int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ - AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Get GPIO state - */ -u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return 0xffffffff; - - /* GPIO input magic */ - return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & - 0x1; -} - -/* - * Set GPIO state - */ -int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) -{ - u32 data; - ATH5K_TRACE(ah->ah_sc); - - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - /* GPIO output magic */ - data = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - data &= ~(1 << gpio); - data |= (val & 1) << gpio; - - ath5k_hw_reg_write(ah, data, AR5K_GPIODO); - - return 0; -} - -/* - * Initialize the GPIO interrupt (RFKill switch) - */ -void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, - u32 interrupt_level) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return; - - /* - * Set the GPIO interrupt - */ - data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & - ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | - AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | - (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); - - ath5k_hw_reg_write(ah, interrupt_level ? data : - (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); - - ah->ah_imr |= AR5K_IMR_GPIO; - - /* Enable GPIO interrupts */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); -} - - - - -/****************\ - Misc functions -\****************/ - -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, - u32 capability, u32 *result) -{ - ATH5K_TRACE(ah->ah_sc); - - switch (cap_type) { - case AR5K_CAP_NUM_TXQUEUES: - if (result) { - if (ah->ah_version == AR5K_AR5210) - *result = AR5K_NUM_TX_QUEUES_NOQCU; - else - *result = AR5K_NUM_TX_QUEUES; - goto yes; - } - case AR5K_CAP_VEOL: - goto yes; - case AR5K_CAP_COMPRESSION: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_BURST: - goto yes; - case AR5K_CAP_TPC: - goto yes; - case AR5K_CAP_BSSIDMASK: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_XR: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - default: - goto no; - } - -no: - return -EINVAL; -yes: - return 0; -} - -static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, - u16 assoc_id) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} - -static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 2806b21bf90..ea2e1a20b49 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -1,9 +1,9 @@ /* * Initial register settings functions * - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -20,13 +20,9 @@ */ #include "ath5k.h" -#include "base.h" #include "reg.h" - -/* - * MAC/PHY REGISTERS - */ - +#include "debug.h" +#include "base.h" /* * Mode-independent initial register writes @@ -65,10 +61,10 @@ static const struct ath5k_ini ar5210_ini[] = { { AR5K_TXCFG, AR5K_DMASIZE_128B }, { AR5K_RXCFG, AR5K_DMASIZE_128B }, { AR5K_CFG, AR5K_INIT_CFG }, - { AR5K_TOPS, AR5K_INIT_TOPS }, - { AR5K_RXNOFRM, AR5K_INIT_RXNOFRM }, - { AR5K_RPGTO, AR5K_INIT_RPGTO }, - { AR5K_TXNOFRM, AR5K_INIT_TXNOFRM }, + { AR5K_TOPS, 8 }, + { AR5K_RXNOFRM, 8 }, + { AR5K_RPGTO, 0 }, + { AR5K_TXNOFRM, 0 }, { AR5K_SFR, 0 }, { AR5K_MIBC, 0 }, { AR5K_MISC, 0 }, diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c new file mode 100644 index 00000000000..a47df9a24aa --- /dev/null +++ b/drivers/net/wireless/ath5k/pcu.c @@ -0,0 +1,1014 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*********************************\ +* Protocol Control Unit Functions * +\*********************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*******************\ +* Generic functions * +\*******************/ + +/** + * ath5k_hw_set_opmode - Set PCU operating mode + * + * @ah: The &struct ath5k_hw + * + * Initialize PCU for the various operating modes (AP/STA etc) + * + * NOTE: ah->ah_op_mode must be set before calling this. + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah) +{ + u32 pcu_reg, beacon_reg, low_id, high_id; + + pcu_reg = 0; + beacon_reg = 0; + + ATH5K_TRACE(ah->ah_sc); + + switch (ah->ah_op_mode) { + case NL80211_IFTYPE_ADHOC: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_ADHOC; + break; + + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_AP; + break; + + case NL80211_IFTYPE_STATION: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case NL80211_IFTYPE_MONITOR: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = AR5K_LOW_ID(ah->ah_sta_id); + high_id = AR5K_HIGH_ID(ah->ah_sta_id); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_update - Update mib counters (mac layer statistics) + * + * @ah: The &struct ath5k_hw + * @stats: The &struct ieee80211_low_level_stats we use to track + * statistics on the driver + * + * Reads MIB counters from PCU and updates sw statistics. Must be + * called after a MIB interrupt. + */ +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, + struct ieee80211_low_level_stats *stats) +{ + ATH5K_TRACE(ah->ah_sc); + + /* Read-And-Clear */ + stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); + stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); + stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); + stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); + + /* XXX: Should we use this to track beacon count ? + * -we read it anyway to clear the register */ + ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); + + /* Reset profile count registers on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); + } +} + +/** + * ath5k_hw_set_ack_bitrate - set bitrate for ACKs + * + * @ah: The &struct ath5k_hw + * @high: Flag to determine if we want to use high transmition rate + * for ACKs or not + * + * If high flag is set, we tell hw to use a set of control rates based on + * the current transmition rate (check out control_rates array inside reset.c). + * If not hw just uses the lowest rate available for the current modulation + * scheme being used (1Mbit for CCK and 6Mbits for OFDM). + */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) +{ + if (ah->ah_version != AR5K_AR5212) + return; + else { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (high) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + } +} + + +/******************\ +* ACK/CTS Timeouts * +\******************/ + +/** + * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); +} + +/** + * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/** + * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); +} + +/** + * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + + +/****************\ +* BSSID handling * +\****************/ + +/** + * ath5k_hw_get_lladdr - Get station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Initialize ah->ah_sta_id using the mac address provided + * (just a memcpy). + * + * TODO: Remove it once we merge ath5k_softc and ath5k_hw + */ +void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(mac, ah->ah_sta_id, ETH_ALEN); +} + +/** + * ath5k_hw_set_lladdr - Set station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Set station id on hw using the provided mac address + */ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Set new station ID */ + memcpy(ah->ah_sta_id, mac, ETH_ALEN); + + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_set_associd - Set BSSID for association + * + * @ah: The &struct ath5k_hw + * @bssid: BSSID + * @assoc_id: Assoc id + * + * Sets the BSSID which trigers the "SME Join" operation + */ +void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) +{ + u32 low_id, high_id; + u16 tim_offset = 0; + + /* + * Set simple BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); + } + + /* + * Set BSSID which triggers the "SME Join" operation + */ + low_id = AR5K_LOW_ID(bssid); + high_id = AR5K_HIGH_ID(bssid); + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << + AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); + + if (assoc_id == 0) { + ath5k_hw_disable_pspoll(ah); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, + tim_offset ? tim_offset + 4 : 0); + + ath5k_hw_enable_pspoll(ah, NULL, 0); +} + +/** + * ath5k_hw_set_bssid_mask - filter out bssids we listen + * + * @ah: the &struct ath5k_hw + * @mask: the bssid_mask, a u8 array of size ETH_ALEN + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * NOTE: This is a simple filter and does *not* filter out all + * relevant frames. Some frames that are not for us might get ACKed from us + * by PCU because they just match the mask. + * + * When handling multiple BSSes you can get the BSSID mask by computing the + * set of ~ ( MAC XOR BSSID ) for all bssids we handle. + * + * When you do this you are essentially computing the common bits of all your + * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with + * the MAC address to obtain the relevant bits and compare the result with + * (frame's BSSID & mask) to see if they match. + */ +/* + * Simple example: on your card you have have two BSSes you have created with + * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. + * There is another BSSID-03 but you are not part of it. For simplicity's sake, + * assuming only 4 bits for a mac address and for BSSIDs you can then have: + * + * \ + * MAC: 0001 | + * BSSID-01: 0100 | --> Belongs to us + * BSSID-02: 1001 | + * / + * ------------------- + * BSSID-03: 0110 | --> External + * ------------------- + * + * Our bssid_mask would then be: + * + * On loop iteration for BSSID-01: + * ~(0001 ^ 0100) -> ~(0101) + * -> 1010 + * bssid_mask = 1010 + * + * On loop iteration for BSSID-02: + * bssid_mask &= ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(1001) + * bssid_mask = (1010) & (0110) + * bssid_mask = 0010 + * + * A bssid_mask of 0010 means "only pay attention to the second least + * significant bit". This is because its the only bit common + * amongst the MAC and all BSSIDs we support. To findout what the real + * common bit is we can simply "&" the bssid_mask now with any BSSID we have + * or our MAC address (we assume the hardware uses the MAC address). + * + * Now, suppose there's an incoming frame for BSSID-03: + * + * IFRAME-01: 0110 + * + * An easy eye-inspeciton of this already should tell you that this frame + * will not pass our check. This is beacuse the bssid_mask tells the + * hardware to only look at the second least significant bit and the + * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB + * as 1, which does not match 0. + * + * So with IFRAME-01 we *assume* the hardware will do: + * + * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; + * --> allow = (0010) == 0000 ? 1 : 0; + * --> allow = 0 + * + * Lets now test a frame that should work: + * + * IFRAME-02: 0001 (we should allow) + * + * allow = (0001 & 1010) == 1010 + * + * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; + * --> allow = (0010) == (0010) + * --> allow = 1 + * + * Other examples: + * + * IFRAME-03: 0100 --> allowed + * IFRAME-04: 1001 --> allowed + * IFRAME-05: 1101 --> allowed but its not for us!!! + * + */ +int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + u32 low_id, high_id; + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5212) { + low_id = AR5K_LOW_ID(mask); + high_id = AR5K_HIGH_ID(mask); + + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); + + return 0; + } + + return -EIO; +} + + +/************\ +* RX Control * +\************/ + +/** + * ath5k_hw_start_rx_pcu - Start RX engine + * + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + * TODO: Init ANI here + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu - Stop RX engine + * + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + * + * TODO: Detach ANI here + */ +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * Set multicast filter + */ +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + ATH5K_TRACE(ah->ah_sc); + /* Set the multicat filter */ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/* + * Set multicast filter by index + */ +int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/* + * Clear Multicast filter by index + */ +int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/** + * ath5k_hw_get_rx_filter - Get current rx filter + * + * @ah: The &struct ath5k_hw + * + * Returns the RX filter by reading rx filter and + * phy error filter registers. RX filter is used + * to set the allowed frame types that PCU will accept + * and pass to the driver. For a list of frame types + * check out reg.h. + */ +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + ATH5K_TRACE(ah->ah_sc); + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/** + * ath5k_hw_set_rx_filter - Set rx filter + * + * @ah: The &struct ath5k_hw + * @filter: RX filter mask (see reg.h) + * + * Sets RX filter register and also handles PHY error filter + * register on 5212 and newer chips so that we have proper PHY + * error reporting. + */ +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA*/ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + + +/****************\ +* Beacon control * +\****************/ + +/** + * ath5k_hw_get_tsf32 - Get a 32bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns lower 32 bits of current TSF + */ +u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_TSF_L32); +} + +/** + * ath5k_hw_get_tsf64 - Get the full 64bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns the current TSF + */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +{ + u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); +} + +/** + * ath5k_hw_reset_tsf - Force a TSF reset + * + * @ah: The &struct ath5k_hw + * + * Forces a TSF reset on PCU + */ +void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +{ + u32 val; + + ATH5K_TRACE(ah->ah_sc); + + val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF; + + /* + * Each write to the RESET_TSF bit toggles a hardware internal + * signal to reset TSF, but if left high it will cause a TSF reset + * on the next chip reset as well. Thus we always write the value + * twice to clear the signal. + */ + ath5k_hw_reg_write(ah, val, AR5K_BEACON); + ath5k_hw_reg_write(ah, val, AR5K_BEACON); +} + +/* + * Initialize beacon timers + */ +void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +{ + u32 timer1, timer2, timer3; + + ATH5K_TRACE(ah->ah_sc); + /* + * Set the additional timers by mode + */ + switch (ah->ah_op_mode) { + case NL80211_IFTYPE_STATION: + if (ah->ah_version == AR5K_AR5210) { + timer1 = 0xffffffff; + timer2 = 0xffffffff; + } else { + timer1 = 0x0000ffff; + timer2 = 0x0007ffff; + } + break; + + default: + timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; + timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; + } + + timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); + + /* + * Set the beacon register and enable all timers. + * (next beacon, DMA beacon, software beacon, ATIM window time) + */ + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); + ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); + ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); + + ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | + AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), + AR5K_BEACON); +} + +#if 0 +/* + * Set beacon timers + */ +int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, + const struct ath5k_beacon_state *state) +{ + u32 cfp_period, next_cfp, dtim, interval, next_beacon; + + /* + * TODO: should be changed through *state + * review struct ath5k_beacon_state struct + * + * XXX: These are used for cfp period bellow, are they + * ok ? Is it O.K. for tsf here to be 0 or should we use + * get_tsf ? + */ + u32 dtim_count = 0; /* XXX */ + u32 cfp_count = 0; /* XXX */ + u32 tsf = 0; /* XXX */ + + ATH5K_TRACE(ah->ah_sc); + /* Return on an invalid beacon state */ + if (state->bs_interval < 1) + return -EINVAL; + + interval = state->bs_interval; + dtim = state->bs_dtim_period; + + /* + * PCF support? + */ + if (state->bs_cfp_period > 0) { + /* + * Enable PCF mode and set the CFP + * (Contention Free Period) and timer registers + */ + cfp_period = state->bs_cfp_period * state->bs_dtim_period * + state->bs_interval; + next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * + state->bs_interval; + + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); + ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, + AR5K_CFP_DUR); + ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : + next_cfp)) << 3, AR5K_TIMER2); + } else { + /* Disable PCF mode */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + } + + /* + * Enable the beacon timer register + */ + ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); + + /* + * Start the beacon timers + */ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) & + ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | + AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, + AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, + AR5K_BEACON_PERIOD), AR5K_BEACON); + + /* + * Write new beacon miss threshold, if it appears to be valid + * XXX: Figure out right values for min <= bs_bmiss_threshold <= max + * and return if its not in range. We can test this by reading value and + * setting value to a largest value and seeing which values register. + */ + + AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, + state->bs_bmiss_threshold); + + /* + * Set sleep control register + * XXX: Didn't find this in 5210 code but since this register + * exists also in ar5k's 5210 headers i leave it as common code. + */ + AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, + (state->bs_sleep_duration - 3) << 3); + + /* + * Set enhanced sleep registers on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + if (state->bs_sleep_duration > state->bs_interval && + roundup(state->bs_sleep_duration, interval) == + state->bs_sleep_duration) + interval = state->bs_sleep_duration; + + if (state->bs_sleep_duration > dtim && (dtim == 0 || + roundup(state->bs_sleep_duration, dtim) == + state->bs_sleep_duration)) + dtim = state->bs_sleep_duration; + + if (interval > dtim) + return -EINVAL; + + next_beacon = interval == dtim ? state->bs_next_dtim : + state->bs_next_beacon; + + ath5k_hw_reg_write(ah, + AR5K_REG_SM((state->bs_next_dtim - 3) << 3, + AR5K_SLEEP0_NEXT_DTIM) | + AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | + AR5K_SLEEP0_ENH_SLEEP_EN | + AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, + AR5K_SLEEP1_NEXT_TIM) | + AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); + + ath5k_hw_reg_write(ah, + AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | + AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); + } + + return 0; +} + +/* + * Reset beacon timers + */ +void ath5k_hw_reset_beacon(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /* + * Disable beacon timer + */ + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + /* + * Disable some beacon register values + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); +} + +/* + * Wait for beacon queue to finish + */ +int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) +{ + unsigned int i; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* 5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + /* + * Wait for beaconn queue to finish by checking + * Control Register and Beacon Status Register. + */ + for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { + if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) + || + !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) + break; + udelay(10); + } + + /* Timeout... */ + if (i <= 0) { + /* + * Re-schedule the beacon queue + */ + ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BCR); + + return -EIO; + } + ret = 0; + } else { + /*5211/5212*/ + ret = ath5k_hw_register_timeout(ah, + AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), + AR5K_QCU_STS_FRMPENDCNT, 0, false); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) + return -EIO; + } + + return ret; +} +#endif + + +/*********************\ +* Key table functions * +\*********************/ + +/* + * Reset a key entry on the table + */ +int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); + + /* + * Set NULL encryption on AR5212+ + * + * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) + * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 + * + * Note2: Windows driver (ndiswrapper) sets this to + * 0x00000714 instead of 0x00000007 + */ + if (ah->ah_version > AR5K_AR5211) + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(entry)); + + return 0; +} + +/* + * Check if a table entry is valid + */ +int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* Check the validation flag at the end of the entry */ + return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & + AR5K_KEYTABLE_VALID; +} + +/* + * Set a key entry on the table + */ +int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, + const struct ieee80211_key_conf *key, const u8 *mac) +{ + unsigned int i; + __le32 key_v[5] = {}; + u32 keytype; + + ATH5K_TRACE(ah->ah_sc); + + /* key->keylen comes in from mac80211 in bytes */ + + if (key->keylen > AR5K_KEYTABLE_SIZE / 8) + return -EOPNOTSUPP; + + switch (key->keylen) { + /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ + case 40 / 8: + memcpy(&key_v[0], key->key, 5); + keytype = AR5K_KEYTABLE_TYPE_40; + break; + + /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ + case 104 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 1); + keytype = AR5K_KEYTABLE_TYPE_104; + break; + /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ + case 128 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 4); + keytype = AR5K_KEYTABLE_TYPE_128; + break; + + default: + return -EINVAL; /* shouldn't happen */ + } + + for (i = 0; i < ARRAY_SIZE(key_v); i++) + ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), + AR5K_KEYTABLE_OFF(entry, i)); + + ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); + + return ath5k_hw_set_key_lladdr(ah, entry, mac); +} + +int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Invalid entry (key table overflow) */ + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* MAC may be NULL if it's a broadcast key. In this case no need to + * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ + if (unlikely(mac == NULL)) { + low_id = 0xffffffff; + high_id = 0xffff | AR5K_KEYTABLE_VALID; + } else { + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; + } + + ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); + ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index fa0d47faf57..e43f6563e61 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1,9 +1,9 @@ /* * PHY functions * - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -19,6 +19,8 @@ * */ +#define _ATH5K_PHY + #include <linux/delay.h> #include "ath5k.h" @@ -2122,7 +2124,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); - udelay(2300); + mdelay(2); /* * Set the channel (with AGC turned off) @@ -2501,3 +2503,5 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) return ath5k_hw_txpower(ah, channel, power); } + +#undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c new file mode 100644 index 00000000000..01bf09176d2 --- /dev/null +++ b/drivers/net/wireless/ath5k/qcu.c @@ -0,0 +1,488 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/********************************************\ +Queue Control Unit, DFS Control Unit Functions +\********************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Get properties for a transmit queue + */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + +/* + * Set properties for a transmit queue + */ +int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); + + /*XXX: Is this supported on 5210 ?*/ + if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && + ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || + (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || + queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) + ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + + return 0; +} + +/* + * Initialize a transmit queue + */ +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info) +{ + unsigned int queue; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Get queue by type + */ + /*5210 only has 2 queues*/ + if (ah->ah_version == AR5K_AR5210) { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; + break; + default: + return -EINVAL; + } + } else { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; + ah->ah_txq[queue].tqi_type != + AR5K_TX_QUEUE_INACTIVE; queue++) { + + if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) + return -EINVAL; + } + break; + case AR5K_TX_QUEUE_UAPSD: + queue = AR5K_TX_QUEUE_ID_UAPSD; + break; + case AR5K_TX_QUEUE_BEACON: + queue = AR5K_TX_QUEUE_ID_BEACON; + break; + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_CAB; + break; + case AR5K_TX_QUEUE_XR_DATA: + if (ah->ah_version != AR5K_AR5212) + ATH5K_ERR(ah->ah_sc, + "XR data queues only supported in" + " 5212!\n"); + queue = AR5K_TX_QUEUE_ID_XR_DATA; + break; + default: + return -EINVAL; + } + } + + /* + * Setup internal queue structure + */ + memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); + ah->ah_txq[queue].tqi_type = queue_type; + + if (queue_info != NULL) { + queue_info->tqi_type = queue_type; + ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info); + if (ret) + return ret; + } + + /* + * We use ah_txq_status to hold a temp value for + * the Secondary interrupt mask registers on 5211+ + * check out ath5k_hw_reset_tx_queue + */ + AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); + + return queue; +} + +/* + * Get number of pending frames + * for a specific queue [5211+] + */ +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; +} + +/* + * Set a transmit queue inactive + */ +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); +} + +/* + * Set DFS properties for a transmit queue on DCU + */ +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + u32 cw_min, cw_max, retry_lg, retry_sh; + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + tq = &ah->ah_txq[queue]; + + if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) + return 0; + + if (ah->ah_version == AR5K_AR5210) { + /* Only handle data queues, others will be ignored */ + if (tq->tqi_type != AR5K_TX_QUEUE_DATA) + return 0; + + /* Set Slot time */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, + AR5K_SLOT_TIME); + /* Set ACK_CTS timeout */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : + AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); + /* Set Transmit Latency */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_TRANSMIT_LATENCY_TURBO : + AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); + + /* Set IFS0 */ + if (ah->ah_turbo) { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME_TURBO) << + AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, + AR5K_IFS0); + } else { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | + AR5K_INIT_SIFS, AR5K_IFS0); + } + + /* Set IFS1 */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_PROTO_TIME_CNTRL_TURBO : + AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); + /* Set AR5K_PHY_SETTLING */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x1C, + AR5K_PHY_SETTLING); + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020) : + (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } + + /* + * Calculate cwmin/max by channel mode + */ + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; + ah->ah_aifs = AR5K_TUNE_AIFS; + /*XR is only supported on 5212*/ + if (IS_CHAN_XR(ah->ah_current_channel) && + ah->ah_version == AR5K_AR5212) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; + ah->ah_aifs = AR5K_TUNE_AIFS_XR; + /*B mode is not supported on 5210*/ + } else if (IS_CHAN_B(ah->ah_current_channel) && + ah->ah_version != AR5K_AR5210) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; + ah->ah_aifs = AR5K_TUNE_AIFS_11B; + } + + cw_min = 1; + while (cw_min < ah->ah_cw_min) + cw_min = (cw_min << 1) | 1; + + cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : + ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); + cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : + ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); + + /* + * Calculate and set retry limits + */ + if (ah->ah_software_retry) { + /* XXX Need to test this */ + retry_lg = ah->ah_limit_tx_retries; + retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? + AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; + } else { + retry_lg = AR5K_INIT_LG_RETRY; + retry_sh = AR5K_INIT_SH_RETRY; + } + + /*No QCU/DCU [5210]*/ + if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_reg_write(ah, + (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + } else { + /*QCU/DCU [5211+]*/ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + + /*===Rest is also for QCU/DCU only [5211+]===*/ + + /* + * Set initial content window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, + AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set misc registers + */ + ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, + AR5K_QUEUE_MISC(queue)); + + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_CBR); + if (tq->tqi_cbr_overflow_limit) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBR_THRES_ENABLE); + } + + if (tq->tqi_ready_time) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags + & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_RDY_VEOL_POLICY); + } + + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); + + /* + * Set registers by queue type + */ + switch (tq->tqi_type) { + case AR5K_TX_QUEUE_BEACON: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_BCN_DIS | + AR5K_QCU_MISC_BCN_ENABLE); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S) | + AR5K_DCU_MISC_POST_FR_BKOFF_DIS | + AR5K_DCU_MISC_BCN_ENABLE); + + ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - + (AR5K_TUNE_SW_BEACON_RESP - + AR5K_TUNE_DMA_BEACON_RESP) - + AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + break; + + case AR5K_TX_QUEUE_CAB: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_DIS | + AR5K_QCU_MISC_CBREXP_BCN_DIS); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S)); + break; + + case AR5K_TX_QUEUE_UAPSD: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBREXP_DIS); + break; + + case AR5K_TX_QUEUE_DATA: + default: + break; + } + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + + /* Update secondary interrupt mask registers */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); + } + + return 0; +} + +/* + * Get slot time from DCU + */ +unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + if (ah->ah_version == AR5K_AR5210) + return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, + AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); + else + return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; +} + +/* + * Set slot time on DCU + */ +int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) +{ + ATH5K_TRACE(ah->ah_sc); + if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, + ah->ah_turbo), AR5K_SLOT_TIME); + else + ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 7562bf173d3..e557fe178bb 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -1,7 +1,7 @@ /* - * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -29,6 +29,10 @@ * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf + * + * This file also contains register values found on a memory dump of + * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal + * released by Atheros and on various debug messages found on the net. */ @@ -295,7 +299,7 @@ #define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ #define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ -#define AR5K_ISR_BRSSI 0x00020000 +#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ @@ -303,46 +307,56 @@ #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ #define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ -#define AR5K_ISR_TIM 0x00800000 /* [5210] */ -#define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */ -#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/ -#define AR5K_ISR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */ -#define AR5K_ISR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */ -#define AR5K_ISR_QTRIG 0x08000000 /* [5211+] */ +#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ +#define AR5K_ISR_TIM 0x00800000 /* [5211+] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ +#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ +#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ +#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ /* * Secondary status registers [5211+] (0 - 4) * - * I guess from the names that these give the status for each - * queue, that's why only masks are defined here, haven't got - * any info about them (couldn't find them anywhere in ar5k code). + * These give the status for each QCU, only QCUs 0-9 are + * represented. */ #define AR5K_SISR0 0x0084 /* Register Address [5211+] */ #define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SISR0_QCU_TXOK_S 0 #define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SISR0_QCU_TXDESC_S 16 #define AR5K_SISR1 0x0088 /* Register Address [5211+] */ #define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SISR1_QCU_TXERR_S 0 #define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SISR1_QCU_TXEOL_S 16 #define AR5K_SISR2 0x008c /* Register Address [5211+] */ #define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SISR2_QCU_TXURN_S 0 #define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */ #define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */ -#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */ +#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */ #define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ #define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ #define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ #define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SISR3_QCBORN_S 0 #define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SISR3_QCBRURN_S 16 #define AR5K_SISR4 0x0094 /* Register Address [5211+] */ #define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SISR4_QTRIG_S 0 /* * Shadow read-and-clear interrupt status registers [5211+] @@ -379,7 +393,7 @@ #define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ #define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ -#define AR5K_IMR_BRSSI 0x00020000 +#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ @@ -387,12 +401,14 @@ #define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ #define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ #define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ #define AR5K_IMR_TIM 0x00800000 /* [5211+] */ -#define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */ +#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ #define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ -#define AR5K_IMR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */ -#define AR5K_IMR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */ -#define AR5K_IMR_QTRIG 0x08000000 /* [5211+] */ +#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ +#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ +#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ /* * Secondary interrupt mask registers [5211+] (0 - 4) @@ -414,13 +430,14 @@ #define AR5K_SIMR2_QCU_TXURN_S 0 #define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */ #define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */ -#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */ +#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */ #define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ #define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ #define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ #define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ #define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ #define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ @@ -586,15 +603,15 @@ #define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ -#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ -#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ -#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ +#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ #define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ -#define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */ -#define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */ +#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ +#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ #define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ -#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */ -#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ +#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ #define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ #define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ #define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ @@ -663,6 +680,7 @@ #define AR5K_DCU_LCL_IFS_CW_MAX_S 10 #define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ #define AR5K_DCU_LCL_IFS_AIFS_S 20 +#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ #define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) /* @@ -691,11 +709,7 @@ /* * DCU misc registers [5211+] * - * For some of the registers i couldn't find in the code - * (only backoff stuff is there realy) i tried to match the - * names with 802.11e parameters etc, so i guess VIRTCOL here - * means Virtual Collision and HCFPOLL means Hybrid Coordination - * factor Poll (CF- Poll). Arbiter lockout control controls the + * Note: Arbiter lockout control controls the * behaviour on low priority queues when we have multiple queues * with pending frames. Intra-frame lockout means we wait until * the queue's current frame transmits (with post frame backoff and bursting) @@ -705,15 +719,20 @@ * No lockout means there is no special handling. */ #define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ -#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */ +#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ +#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series + station RTS/data failure count + reset policy (?) */ +#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series + CW reset policy */ +#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ #define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ #define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ #define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ #define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ #define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ -#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 -#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 -#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 #define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ #define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ #define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 @@ -768,8 +787,9 @@ #define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ #define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 #define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ -#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ @@ -820,8 +840,6 @@ #define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ #define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ #define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ -#define AR5K_RESET_CTL_CHIP (AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA | \ - AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY) /* * Sleep control register @@ -833,9 +851,11 @@ #define AR5K_SLEEP_CTL_SLE_S 16 #define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ #define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ -#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 +#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ -/* more bits */ +#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ +#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ +#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ /* * Interrupt pending register @@ -851,27 +871,28 @@ /* * PCI configuration register + * TODO: Fix LED stuff */ #define AR5K_PCICFG 0x4010 /* Register Address */ #define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ -#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */ +#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ #define AR5K_PCICFG_EESIZE_S 3 #define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ #define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ #define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ -#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size (?) [5211+] */ +#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ #define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ #define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ #define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ #define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ #define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ -#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */ -#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */ +#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ +#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ -#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */ -#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */ +#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ @@ -884,7 +905,8 @@ #define AR5K_PCICFG_LEDSTATE \ (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) -#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */ +#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ +#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 /* * "General Purpose Input/Output" (GPIO) control register @@ -906,8 +928,8 @@ #define AR5K_GPIOCR 0x4014 /* Register Address */ #define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ -#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is off (?) */ -#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is on */ +#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ +#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ #define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ #define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ #define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ @@ -925,7 +947,6 @@ #define AR5K_GPIODI 0x401c #define AR5K_GPIODI_M 0x0000002f - /* * Silicon revision register */ @@ -935,7 +956,59 @@ #define AR5K_SREV_VER 0x000000ff /* Mask for version */ #define AR5K_SREV_VER_S 4 +/* + * TXE write posting register + */ +#define AR5K_TXEPOST 0x4028 + +/* + * QCU sleep mask + */ +#define AR5K_QCU_SLEEP_MASK 0x402c + +/* 0x4068 is compression buffer configuration + * register on 5414 and pm configuration register + * on 5424 and newer pci-e chips. */ + +/* + * Compression buffer configuration + * register (enable/disable) [5414] + */ +#define AR5K_5414_CBCFG 0x4068 +#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ + +/* + * PCI-E Power managment configuration + * and status register [5424+] + */ +#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ +/* Only 5424 */ +#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 + when d2_sleep_en is asserted */ +#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ +#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ +#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes + down */ +/* Wake On Wireless */ +#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ +#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ +#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ +#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 +#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 +#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 +#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 + +/* + * PCI-E Workaround enable register + */ +#define AR5K_PCIE_WAEN 0x407c +/* + * PCI-E Serializer/Desirializer + * registers + */ +#define AR5K_PCIE_SERDES 0x4080 +#define AR5K_PCIE_SERDES_RESET 0x4084 /*====EEPROM REGISTERS====*/ @@ -977,98 +1050,6 @@ #define AR5K_EEPROM_BASE 0x6000 /* - * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) - */ -#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ -#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ -#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ -#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ -#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ - -#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ -#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ -#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 -#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ -#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 -#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ -#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 -#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ -#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 -#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ -#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 -#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ -#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 -#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ -#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 -#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ -#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ -#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) -#define AR5K_EEPROM_INFO_CKSUM 0xffff -#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) - -#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ -#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ -#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ -#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_3 0x4003 -#define AR5K_EEPROM_VERSION_4_4 0x4004 -#define AR5K_EEPROM_VERSION_4_5 0x4005 -#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x4007 - -#define AR5K_EEPROM_MODE_11A 0 -#define AR5K_EEPROM_MODE_11B 1 -#define AR5K_EEPROM_MODE_11G 2 - -#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ -#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) -#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) -#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ -#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ -#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ -#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ - -#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c -#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 -#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 -#define AR5K_EEPROM_RFKILL_POLARITY_S 1 - -/* Newer EEPROMs are using a different offset */ -#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ - (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) - -#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) -#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) -#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) - -/* calibration settings */ -#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) -#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) -#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) -#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ - -/* [3.1 - 3.3] */ -#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec -#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed - -/* Misc values available since EEPROM 4.0 */ -#define AR5K_EEPROM_MISC0 0x00c4 -#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) -#define AR5K_EEPROM_MISC1 0x00c5 -#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) - -/* * EEPROM data register */ #define AR5K_EEPROM_DATA_5211 0x6004 @@ -1100,14 +1081,28 @@ * EEPROM config register */ #define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ -#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001 +#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ +#define AR5K_EEPROM_CFG_SIZE_AUTO 0 +#define AR5K_EEPROM_CFG_SIZE_4KBIT 1 +#define AR5K_EEPROM_CFG_SIZE_8KBIT 2 +#define AR5K_EEPROM_CFG_SIZE_16KBIT 3 #define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ #define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ -#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */ +#define AR5K_EEPROM_CFG_CLK_RATE_S 3 +#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 +#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 +#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 +#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ +#define AR5K_EEPROM_CFG_PROT_KEY_S 8 #define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ /* + * TODO: Wake On Wireless registers + * Range 0x7000 - 0x7ce0 + */ + +/* * Protocol Control Unit (PCU) registers */ /* @@ -1139,11 +1134,13 @@ #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ #define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ #define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ -#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */ -#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */ +#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */ +#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ #define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ -#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */ +#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ #define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ +#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ +#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ /* * First BSSID register (MAC address, lower 32bits) @@ -1402,16 +1399,16 @@ #define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 #define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) -#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 +#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */ #define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 #define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) -#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 +#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */ #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */ -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 #define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) #define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ @@ -1420,12 +1417,15 @@ #define AR5K_DIAG_SW_SCRAM_SEED_S 10 #define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 -#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 +#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ #define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) -#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 +#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ #define AR5K_DIAG_SW_OBSPT_S 18 -/* more bits */ +#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */ +#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */ +#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */ +#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */ /* * TSF (clock) register (lower 32 bits) @@ -1636,16 +1636,16 @@ * * XXX: PCDAC steps (0.5dbm) or DBM ? * - * XXX: Mask changes for newer chips to 7f - * like tx power table ? */ #define AR5K_TXPC 0x80e8 /* Register Address */ -#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */ +#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ #define AR5K_TXPC_ACK_S 0 -#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */ +#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ #define AR5K_TXPC_CTS_S 8 -#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */ -#define AR5K_TXPC_CHIRP_S 22 +#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ +#define AR5K_TXPC_CHIRP_S 16 +#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ +#define AR5K_TXPC_DOPPLER_S 24 /* * Profile count registers @@ -1656,14 +1656,19 @@ #define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ /* - * Quiet (period) control registers (?) + * Quiet period control registers */ #define AR5K_QUIET_CTL1 0x80fc /* Register Address */ -#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */ -#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 +#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ +#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ + #define AR5K_QUIET_CTL2 0x8100 /* Register Address */ -#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */ -#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */ +#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ +#define AR5K_QUIET_CTL2_QT_PER_S 0 +#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ +#define AR5K_QUIET_CTL2_QT_DUR_S 16 /* * TSF parameter register @@ -1673,12 +1678,15 @@ #define AR5K_TSF_PARM_INC_S 0 /* - * QoS register (?) + * QoS NOACK policy */ -#define AR5K_QOS 0x8108 /* Register Address */ -#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */ -#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */ -#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */ +#define AR5K_QOS_NOACK 0x8108 /* Register Address */ +#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ +#define AR5K_QOS_NOACK_2BIT_VALUES_S 0 +#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ +#define AR5K_QOS_NOACK_BIT_OFFSET_S 4 +#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ +#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8 /* * PHY error filter register @@ -1702,29 +1710,15 @@ /* * MIC QoS control register (?) */ -#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ -#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */ -#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */ -#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */ -#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */ -#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */ -#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */ -#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */ -#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */ -#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ +#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ +#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) +#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ /* * MIC QoS select register (?) */ -#define AR5K_MIC_QOS_SEL 0x811c -#define AR5K_MIC_QOS_SEL_0 0x00000001 -#define AR5K_MIC_QOS_SEL_1 0x00000010 -#define AR5K_MIC_QOS_SEL_2 0x00000100 -#define AR5K_MIC_QOS_SEL_3 0x00001000 -#define AR5K_MIC_QOS_SEL_4 0x00010000 -#define AR5K_MIC_QOS_SEL_5 0x00100000 -#define AR5K_MIC_QOS_SEL_6 0x01000000 -#define AR5K_MIC_QOS_SEL_7 0x10000000 +#define AR5K_MIC_QOS_SEL 0x811c +#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) /* * Misc mode control register (?) @@ -1759,6 +1753,11 @@ #define AR5K_TSF_THRES 0x813c /* + * TODO: Wake On Wireless registers + * Range: 0x8147 - 0x818c + */ + +/* * Rate -> ACK SIFS mapping table (32 entries) */ #define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ @@ -1873,7 +1872,8 @@ */ #define AR5K_PHY_TURBO 0x9804 /* Register Address */ #define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ -#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */ +#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ +#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */ /* * PHY agility command register @@ -1883,6 +1883,11 @@ #define AR5K_PHY_TST1 0x9808 #define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ #define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC_S 1 +#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ +#define AR5K_PHY_TST1_TXSRC_ALT_S 7 + /* * PHY timing register 3 [5112+] @@ -1907,15 +1912,23 @@ /* * PHY RF control registers - * (i think these are delay times, - * these calibration values exist - * in EEPROM) */ #define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ -#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 #define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ -#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0 + +#define AR5K_PHY_ADC_CTL 0x982c +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 +#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 +#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 +#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 #define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ @@ -1937,35 +1950,43 @@ * PHY settling register */ #define AR5K_PHY_SETTLING 0x9844 /* Register Address */ -#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */ -#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */ +#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ +#define AR5K_PHY_SETTLING_AGC_S 0 +#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */ +#define AR5K_PHY_SETTLINK_SWITCH_S 7 /* * PHY Gain registers */ #define AR5K_PHY_GAIN 0x9848 /* Register Address */ -#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */ +#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ +#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 +#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 +#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 #define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ #define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ /* - * Desired size register + * Desired ADC/PGA size register * (for more infos read ANI patent) */ #define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ -#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */ -#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */ -#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */ +#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ +#define AR5K_PHY_DESIRED_SIZE_ADC_S 0 +#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ +#define AR5K_PHY_DESIRED_SIZE_PGA_S 8 +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ +#define AR5K_PHY_DESIRED_SIZE_TOT_S 20 /* * PHY signal register * (for more infos read ANI patent) */ #define AR5K_PHY_SIG 0x9858 /* Register Address */ -#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */ +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ #define AR5K_PHY_SIG_FIRSTEP_S 12 -#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */ +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ #define AR5K_PHY_SIG_FIRPWR_S 18 /* @@ -1973,9 +1994,9 @@ * (for more infos read ANI patent) */ #define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ -#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */ +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ #define AR5K_PHY_AGCCOARSE_LO_S 7 -#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */ +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ #define AR5K_PHY_AGCCOARSE_HI_S 15 /* @@ -1984,6 +2005,8 @@ #define AR5K_PHY_AGCCTL 0x9860 /* Register address */ #define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ #define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ +#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ /* * PHY noise floor status register @@ -1994,7 +2017,10 @@ #define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) #define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) #define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) -#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */ +#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ +#define AR5K_PHY_NF_THRESH62_S 12 +#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */ +#define AR5K_PHY_NF_MINCCA_PWR_S 19 /* * PHY ADC saturation register [5110] @@ -2034,24 +2060,31 @@ */ #define AR5K_PHY_SCR 0x9870 #define AR5K_PHY_SCR_32MHZ 0x0000001f + #define AR5K_PHY_SLMT 0x9874 #define AR5K_PHY_SLMT_32MHZ 0x0000007f + #define AR5K_PHY_SCAL 0x9878 #define AR5K_PHY_SCAL_32MHZ 0x0000000e + /* * PHY PLL (Phase Locked Loop) control register */ #define AR5K_PHY_PLL 0x987c -#define AR5K_PHY_PLL_20MHZ 0x13 /* For half rate (?) [5111+] */ -#define AR5K_PHY_PLL_40MHZ_5211 0x18 /* For 802.11a */ +#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ +/* 40MHz -> 5GHz band */ +#define AR5K_PHY_PLL_40MHZ_5211 0x00000018 #define AR5K_PHY_PLL_40MHZ_5212 0x000000aa +#define AR5K_PHY_PLL_40MHZ_5413 0x00000004 #define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) -#define AR5K_PHY_PLL_44MHZ_5211 0x19 /* For 802.11b/g */ +/* 44MHz -> 2.4GHz band */ +#define AR5K_PHY_PLL_44MHZ_5211 0x00000019 #define AR5K_PHY_PLL_44MHZ_5212 0x000000ab #define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) + #define AR5K_PHY_PLL_RF5111 0x00000000 #define AR5K_PHY_PLL_RF5112 0x00000040 #define AR5K_PHY_PLL_HALF_RATE 0x00000100 @@ -2118,6 +2151,19 @@ #define AR5K_PHY_RFSTG_DISABLE 0x00000021 /* + * BIN masks (?) + */ +#define AR5K_PHY_BIN_MASK_1 0x9900 +#define AR5K_PHY_BIN_MASK_2 0x9904 +#define AR5K_PHY_BIN_MASK_3 0x9908 + +#define AR5K_PHY_BIN_MASK_CTL 0x990c +#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 +#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 +#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 + +/* * PHY Antenna control register */ #define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ @@ -2164,6 +2210,7 @@ #define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ @@ -2210,7 +2257,6 @@ #define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ #define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ - /* * PHY TX rate power registers [5112+] */ @@ -2232,6 +2278,8 @@ #define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 #define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ +#define AR5K_PHY_FRAME_CTL_EMU 0x80000000 +#define AR5K_PHY_FRAME_CTL_EMU_S 31 /*---[5110/5111]---*/ #define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ #define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ @@ -2250,48 +2298,36 @@ * PHY radar detection register [5111+] */ #define AR5K_PHY_RADAR 0x9954 - -/* Radar enable ........ ........ ........ .......1 */ #define AR5K_PHY_RADAR_ENABLE 0x00000001 -#define AR5K_PHY_RADAR_DISABLE 0x00000000 -#define AR5K_PHY_RADAR_ENABLE_S 0 - -/* This is the value found on the card .1.111.1 .1.1.... 111....1 1...1... -at power on. */ -#define AR5K_PHY_RADAR_PWONDEF_AR5213 0x5d50e188 - -/* This is the value found on the card .1.1.111 ..11...1 .1...1.1 1...11.1 -after DFS is enabled */ -#define AR5K_PHY_RADAR_ENABLED_AR5213 0x5731458d - -/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........ - * power out threshold. - * 7-bits, standard power range {0..127} in 1/2 dBm units. */ -#define AR5K_PHY_RADAR_FIRPWROUTTHR 0x7f000000 -#define AR5K_PHY_RADAR_FIRPWROUTTHR_S 24 - -/* Radar RSSI/SNR threshold. ........ 111111.. ........ ........ - * 6-bits, dBm range {0..63} in dBm units. */ -#define AR5K_PHY_RADAR_RADARRSSITHR 0x00fc0000 -#define AR5K_PHY_RADAR_RADARRSSITHR_S 18 - -/* Pulse height threshold ........ ......11 1111.... ........ - * 6-bits, dBm range {0..63} in dBm units. */ -#define AR5K_PHY_RADAR_PULSEHEIGHTTHR 0x0003f000 -#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12 - -/* Pulse RSSI/SNR threshold ........ ........ ....1111 11...... - * 6-bits, dBm range {0..63} in dBm units. */ -#define AR5K_PHY_RADAR_PULSERSSITHR 0x00000fc0 -#define AR5K_PHY_RADAR_PULSERSSITHR_S 6 - -/* Inband threshold ........ ........ ........ ..11111. - * 5-bits, units unknown {0..31} (? MHz ?) */ -#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e +#define AR5K_PHY_RADAR_DISABLE 0x00000000 +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold + 5-bits, units unknown {0..31} + (? MHz ?) */ #define AR5K_PHY_RADAR_INBANDTHR_S 1 +#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PRSSI_THR_S 6 + +#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 + +#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_RSSI_THR_S 18 + +#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response + filter power out threshold. + 7-bits, standard power range + {0..127} in 1/2 dBm units. */ +#define AR5K_PHY_RADAR_FIRPWR_THRS 24 + /* - * PHY antenna switch table registers [5110] + * PHY antenna switch table registers */ #define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 #define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 @@ -2302,25 +2338,65 @@ after DFS is enabled */ #define AR5K_PHY_NFTHRES 0x9968 /* - * PHY clock sleep registers [5112+] + * Sigma Delta register (?) [5213] */ -#define AR5K_PHY_SCLOCK 0x99f0 -#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c -#define AR5K_PHY_SDELAY 0x99f4 -#define AR5K_PHY_SDELAY_32MHZ 0x000000ff -#define AR5K_PHY_SPENDING 0x99f8 -#define AR5K_PHY_SPENDING_14 0x00000014 -#define AR5K_PHY_SPENDING_18 0x00000018 -#define AR5K_PHY_SPENDING_RF5111 0x00000018 -#define AR5K_PHY_SPENDING_RF5112 0x00000014 -/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ -/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ -#define AR5K_PHY_SPENDING_RF5413 0x00000014 -#define AR5K_PHY_SPENDING_RF2413 0x00000014 -#define AR5K_PHY_SPENDING_RF2425 0x00000018 +#define AR5K_PHY_SIGMA_DELTA 0x996C +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 +#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 +#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 +#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 +#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 + +/* + * RF restart register [5112+] (?) + */ +#define AR5K_PHY_RESTART 0x9970 /* restart */ +#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ +#define AR5K_PHY_RESTART_DIV_GC_S 18 + +/* + * RF Bus access request register (for synth-oly channel switching) + */ +#define AR5K_PHY_RFBUS_REQ 0x997C +#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 + +/* + * Spur mitigation masks (?) + */ +#define AR5K_PHY_TIMING_7 0x9980 +#define AR5K_PHY_TIMING_8 0x9984 +#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 + +#define AR5K_PHY_BIN_MASK2_1 0x9988 +#define AR5K_PHY_BIN_MASK2_2 0x998c +#define AR5K_PHY_BIN_MASK2_3 0x9990 + +#define AR5K_PHY_BIN_MASK2_4 0x9994 +#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 + +#define AR_PHY_TIMING_9 0x9998 +#define AR_PHY_TIMING_10 0x999c +#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff +#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0 + +/* + * Spur mitigation control + */ +#define AR_PHY_TIMING_11 0x99a0 /* Register address */ +#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ +#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 +#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ +#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20 +#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ +#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ /* - * Misc PHY/radio registers [5110 - 5111] + * Gain tables */ #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) @@ -2340,9 +2416,10 @@ after DFS is enabled */ #define AR5K_PHY_CURRENT_RSSI 0x9c1c /* - * PHY RF Bus grant register (?) + * PHY RF Bus grant register */ #define AR5K_PHY_RFBUS_GRANT 0x9c20 +#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 /* * PHY ADC test register @@ -2386,6 +2463,31 @@ after DFS is enabled */ #define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 /* + * Heavy clip enable register + */ +#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 + +/* + * PHY clock sleep registers [5112+] + */ +#define AR5K_PHY_SCLOCK 0x99f0 +#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c +#define AR5K_PHY_SDELAY 0x99f4 +#define AR5K_PHY_SDELAY_32MHZ 0x000000ff +#define AR5K_PHY_SPENDING 0x99f8 +#define AR5K_PHY_SPENDING_14 0x00000014 +#define AR5K_PHY_SPENDING_18 0x00000018 +#define AR5K_PHY_SPENDING_RF5111 0x00000018 +#define AR5K_PHY_SPENDING_RF5112 0x00000014 +/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ +/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ +#define AR5K_PHY_SPENDING_RF5413 0x00000018 +#define AR5K_PHY_SPENDING_RF2413 0x00000018 +#define AR5K_PHY_SPENDING_RF2316 0x00000018 +#define AR5K_PHY_SPENDING_RF2317 0x00000018 +#define AR5K_PHY_SPENDING_RF2425 0x00000014 + +/* * PHY PAPD I (power?) table (?) * (92! entries) */ @@ -2436,10 +2538,47 @@ after DFS is enabled */ #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 +/* Same address is used for antenna diversity activation */ +#define AR5K_PHY_FAST_ANT_DIV 0xa208 +#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 + /* * PHY 2GHz gain register [5111+] */ -#define AR5K_PHY_GAIN_2GHZ 0xa20c -#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 +#define AR5K_PHY_GAIN_2GHZ 0xa20c +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 #define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 -#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c +#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c + +#define AR5K_PHY_CCK_RX_CTL_4 0xa21c +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 + +#define AR5K_PHY_DAG_CCK_CTL 0xa228 +#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 + +#define AR5K_PHY_FAST_ADC 0xa24c + +#define AR5K_PHY_BLUETOOTH 0xa254 + +/* + * Transmit Power Control register + * [2413+] + */ +#define AR5K_PHY_TPC_RG1 0xa258 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 + +#define AR5K_PHY_TPC_RG5 0xa26C +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c new file mode 100644 index 00000000000..8f1886834e6 --- /dev/null +++ b/drivers/net/wireless/ath5k/reset.c @@ -0,0 +1,931 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#define _ATH5K_RESET + +/*****************************\ + Reset functions and helpers +\*****************************/ + +#include <linux/pci.h> +#include "ath5k.h" +#include "reg.h" +#include "base.h" +#include "debug.h" + +/** + * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the OFDM timings for the AR5212 upon reset. This is a helper for + * ath5k_hw_reset(). This seems to tune the PLL a specified frequency + * depending on the bandwidth of the channel. + * + */ +static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + if (!(ah->ah_version == AR5K_AR5212) || + !(channel->hw_value & CHANNEL_OFDM)) + BUG(); + + /* Seems there are two PLLs, one for baseband sampling and one + * for tuning. Tuning basebands are 40 MHz or 80MHz when in + * turbo. */ + clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; + coef_scaled = ((5 * (clock << 24)) / 2) / + channel->center_freq; + + for (coef_exp = 31; coef_exp > 0; coef_exp--) + if ((coef_scaled >> coef_exp) & 0x1) + break; + + if (!coef_exp) + return -EINVAL; + + coef_exp = 14 - (coef_exp - 24); + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + + +/* + * index into rates for control rates, we can set it up like this because + * this is only used for AR5212 and we know it supports G mode + */ +static int control_rates[] = + { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; + +/** + * ath5k_hw_write_rate_duration - set rate duration during hw resets + * + * @ah: the &struct ath5k_hw + * @mode: one of enum ath5k_driver_mode + * + * Write the rate duration table upon hw reset. This is a helper for + * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for + * the hardware for the current mode for each rate. The rates which are capable + * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another + * register for the short preamble ACK timeout calculation. + */ +static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, + unsigned int mode) +{ + struct ath5k_softc *sc = ah->ah_sc; + struct ieee80211_rate *rate; + unsigned int i; + + /* Write rate duration table */ + for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { + u32 reg; + u16 tx_time; + + rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->hw_value); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, + sc->vif, 10, rate)); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) + continue; + + /* + * We're not distinguishing short preamble here, + * This is true, all we'll get is a longer value here + * which is not necessarilly bad. We could use + * export ieee80211_frame_duration() but that needs to be + * fixed first to be properly used by mac802111 drivers: + * + * - remove erp stuff and let the routine figure ofdm + * erp rates + * - remove passing argument ieee80211_local as + * drivers don't have access to it + * - move drivers using ieee80211_generic_frame_duration() + * to this + */ + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + +/* + * Reset chipset + */ +static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + ATH5K_TRACE(ah->ah_sc); + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + udelay(15); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/* + * Sleep control + */ +int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, + bool set_chip, u16 sleep_duration) +{ + unsigned int i; + u32 staid, data; + + ATH5K_TRACE(ah->ah_sc); + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + + switch (mode) { + case AR5K_PM_AUTO: + staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; + /* fallthrough */ + case AR5K_PM_NETWORK_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_FULL_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + + if (!set_chip) + goto commit; + + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if (data & 0xffc00000) + data = 0; + else + data = data & 0xfffcffff; + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); + + for (i = 50; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + udelay(200); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i <= 0) + return -EIO; + + break; + + default: + return -EINVAL; + } + +commit: + ah->ah_power_mode = mode; + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/* + * Bring up MAC + PHY Chips + */ +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) +{ + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 turbo, mode, clock, bus_flags; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Wakeup the device */ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); + return ret; + } + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (flags & CHANNEL_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (flags & CHANNEL_CCK) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else if (flags & CHANNEL_OFDM) { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else if (flags & CHANNEL_5GHZ) { + mode |= AR5K_PHY_MODE_FREQ_5GHZ; + clock |= AR5K_PHY_PLL_40MHZ; + + if (flags & CHANNEL_OFDM) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else { + ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); + return -EINVAL; + } + + if (flags & CHANNEL_TURBO) + turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (flags & CHANNEL_TURBO) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + /* reseting PCI on PCI-E cards results card to hang + * and always return 0xffff... so we ingore that flag + * for PCI-E cards */ + bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + + /* Reset chipset */ + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + mdelay(2); + } else { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); + return -EIO; + } + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...final warm reset */ + if (ath5k_hw_nic_reset(ah, 0)) { + ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + if (ah->ah_version != AR5K_AR5210) { + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + udelay(300); + + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + +/* + * Main reset function + */ +int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + struct ieee80211_channel *channel, bool change_channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 data, s_seq, s_ant, s_led[3], dma_size; + unsigned int i, mode, freq, ee_mode, ant[2]; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + s_seq = 0; + s_ant = 0; + ee_mode = 0; + freq = 0; + mode = 0; + + /* + * Save some registers before a reset + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + if (change_channel) { + /* Seq number for queue 0 -do this for all queues ? */ + s_seq = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DFS_SEQNUM(0)); + /*Default antenna*/ + s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + } + } + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + if (change_channel && ah->ah_rf_banks != NULL) + ath5k_hw_get_rf_gain(ah); + + + /*Wakeup the device*/ + ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); + if (ret) + return ret; + + /* + * Initialize operating mode + */ + ah->ah_op_mode = op_mode; + + /* + * 5111/5112 Settings + * 5210 only comes with RF5110 + */ + if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_radio != AR5K_RF5111 && + ah->ah_radio != AR5K_RF5112 && + ah->ah_radio != AR5K_RF5413 && + ah->ah_radio != AR5K_RF2413 && + ah->ah_radio != AR5K_RF2425) { + ATH5K_ERR(ah->ah_sc, + "invalid phy radio: %u\n", ah->ah_radio); + return -EINVAL; + } + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + mode = AR5K_MODE_11A; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + mode = AR5K_MODE_11G; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + mode = AR5K_MODE_11B; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11B; + break; + case CHANNEL_T: + mode = AR5K_MODE_11A_TURBO; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + /*Is this ok on 5211 too ?*/ + case CHANNEL_TG: + mode = AR5K_MODE_11G_TURBO; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_XR: + if (ah->ah_version == AR5K_AR5211) { + ATH5K_ERR(ah->ah_sc, + "XR mode not available on 5211"); + return -EINVAL; + } + mode = AR5K_MODE_XR; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + + /* PHY access enable */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + } + + ret = ath5k_hw_write_initvals(ah, mode, change_channel); + if (ret) + return ret; + + /* + * 5211/5212 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain(ah, freq); + if (ret) + return ret; + + mdelay(1); + + /* + * Write some more initial register settings + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); + + if (channel->hw_value == CHANNEL_G) + if (ah->ah_mac_srev < AR5K_SREV_AR2413) + ath5k_hw_reg_write(ah, 0x00f80d80, + 0x994c); + else if (ah->ah_mac_srev < AR5K_SREV_AR5424) + ath5k_hw_reg_write(ah, 0x00380140, + 0x994c); + else if (ah->ah_mac_srev < AR5K_SREV_AR2425) + ath5k_hw_reg_write(ah, 0x00fc0ec0, + 0x994c); + else /* 2425 */ + ath5k_hw_reg_write(ah, 0x00fc0fc0, + 0x994c); + else + ath5k_hw_reg_write(ah, 0x00000000, 0x994c); + + /* Some bits are disabled here, we know nothing about + * register 0xa228 yet, most of the times this ends up + * with a value 0x9b5 -haven't seen any dump with + * a different value- */ + /* Got this from decompiling binary HAL */ + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffffdff; + ath5k_hw_reg_write(ah, data, 0xa228); + + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffe03ff; + ath5k_hw_reg_write(ah, data, 0xa228); + data = 0; + + /* Just write 0x9b5 ? */ + /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); + ath5k_hw_reg_write(ah, 0x00000000, 0xa254); + ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio >= AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->hw_value & CHANNEL_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + data = 0; + } + + /* + * Set TX power (FIXME) + */ + ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); + if (ret) + return ret; + + /* Write rate duration table only on AR5212 and if + * virtual interface has already been brought up + * XXX: rethink this after new mode changes to + * mac80211 are integrated */ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_sc->vif != NULL) + ath5k_hw_write_rate_duration(ah, mode); + + /* + * Write RF registers + */ + ret = ath5k_hw_rfregs(ah, channel, mode); + if (ret) + return ret; + + /* + * Configure additional registers + */ + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + } + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + /* + * Set channel and calibrate the PHY + */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* Set antenna mode */ + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, + ah->ah_antenna[ee_mode][0], 0xfffffc06); + + /* + * In case a fixed antenna was set as default + * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE + * registers. + */ + if (s_ant != 0) { + if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ + ant[0] = ant[1] = AR5K_ANT_FIXED_A; + else /* 2 - Aux */ + ant[0] = ant[1] = AR5K_ANT_FIXED_B; + } else { + ant[0] = AR5K_ANT_FIXED_A; + ant[1] = AR5K_ANT_FIXED_B; + } + + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], + AR5K_PHY_ANT_SWITCH_TABLE_0); + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], + AR5K_PHY_ANT_SWITCH_TABLE_1); + + /* Commit values from EEPROM */ + if (ah->ah_radio == AR5K_RF5111) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); + + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY_NFTHRES); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, + (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, + 0xffffc07f); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, + (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, + 0xfffc0fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, + (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | + ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), + 0xffff0000); + + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, + ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, + (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CORR_ENABLE | + (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | + ee->ee_q_cal[ee_mode]); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + + } else { + mdelay(1); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + mdelay(1); + } + + /* + * Restore saved values + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); + ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); + } + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* + * Misc + */ + /* XXX: add ah->aid once mac80211 gives this to us */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + + ath5k_hw_set_opmode(ah); + /*PISR/SISR Not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + /* If we later allow tuning for this, store into sc structure */ + data = AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; + ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); + } + + /* + * Set Rx/Tx DMA Configuration + * + * Set maximum DMA size (512) except for PCI-E cards since + * it causes rx overruns and tx errors (tested on 5424 but since + * rx overruns also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * In dumps this is 128 for allchips. + * + * XXX: need to check 5210 for this + * TODO: Check out tx triger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, dma_size); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, dma_size); + } + + /* + * Enable the PHY and wait until completion + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + /* + * On 5211+ read activation -> rx delay + * and use it. + */ + if (ah->ah_version != AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + data = (channel->hw_value & CHANNEL_CCK) ? + ((data << 2) / 22) : (data / 10); + + udelay(100 + (2 * data)); + data = 0; + } else { + mdelay(1); + } + + /* + * Perform ADC test (?) + */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); + data = 0; + + /* + * Start automatic gain calibration + * + * During AGC calibration RX path is re-routed to + * a signal detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * If we are in a noisy environment AGC calibration may time + * out. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", + channel->center_freq); + return -EAGAIN; + } + + /* + * Start noise floor calibration + * + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. I believe that's wrong because + * during NF calibration, rx path is also routed to a detector, so if + * it doesn't finish we won't have RX. + * + * XXX: Find an interval that's OK for all cards... + */ + ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + if (ret) + return ret; + + /* + * Reset queues and start beacon timers at the end of the reset routine + */ + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + /*No QCU on 5210*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); + + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX | + AR5K_INT_FATAL); + + /* + * Set RF kill flags if supported by the device (read from the EEPROM) + * Disable gpio_intr for now since it results system hang. + * TODO: Handle this in ath5k_intr + */ +#if 0 + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { + ath5k_hw_set_gpio_input(ah, 0); + ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); + if (ah->ah_gpio[0] == 0) + ath5k_hw_set_gpio_intr(ah, 0, 1); + else + ath5k_hw_set_gpio_intr(ah, 0, 0); + } +#endif + + /* + * Set the 32MHz reference clock on 5212 phy clock sleep register + * + * TODO: Find out how to switch to external 32Khz clock to save power + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); + + data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; + data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? + 0x00000f80 : 0x00001380 ; + ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); + data = 0; + } + + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); + ath5k_hw_reg_write(ah, 0x00003210, 0x811c); + ath5k_hw_reg_write(ah, 0x00000052, 0x8108); + if (ah->ah_mac_srev >= AR5K_SREV_AR2413) + ath5k_hw_reg_write(ah, 0x00000004, 0x8120); + } + + /* + * Disable beacons and reset the register + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | + AR5K_BEACON_RESET_TSF); + + return 0; +} + +#undef _ATH5K_RESET diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig index 9e19dcceb3a..80a69243041 100644 --- a/drivers/net/wireless/ath9k/Kconfig +++ b/drivers/net/wireless/ath9k/Kconfig @@ -1,6 +1,9 @@ config ATH9K tristate "Atheros 802.11n wireless cards support" depends on PCI && MAC80211 && WLAN_80211 + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS ---help--- This module adds support for wireless adapters based on Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index d1b0fbae5a3..accace5f7ef 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -144,6 +144,7 @@ struct ath_desc { #define ATH9K_TXDESC_EXT_AND_CTL 0x0080 #define ATH9K_TXDESC_VMF 0x0100 #define ATH9K_TXDESC_FRAG_IS_ON 0x0200 +#define ATH9K_TXDESC_CAB 0x0400 #define ATH9K_RXDESC_INTREQ 0x0020 @@ -564,8 +565,6 @@ enum ath9k_cipher { #define CTL_5GHT40 8 #define AR_EEPROM_MAC(i) (0x1d+(i)) -#define EEP_SCALE 100 -#define EEP_DELTA 10 #define AR_EEPROM_RFSILENT_GPIO_SEL 0x001c #define AR_EEPROM_RFSILENT_GPIO_SEL_S 2 @@ -606,9 +605,6 @@ struct ath9k_country_entry { #define REG_CLR_BIT(_a, _r, _f) \ REG_WRITE(_a, _r, REG_READ(_a, _r) & ~_f) -#define ATH9K_COMP_BUF_MAX_SIZE 9216 -#define ATH9K_COMP_BUF_ALIGN_SIZE 512 - #define ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS 0x00000001 #define INIT_AIFS 2 @@ -632,12 +628,6 @@ struct ath9k_country_entry { (IEEE80211_WEP_IVLEN + \ IEEE80211_WEP_KIDLEN + \ IEEE80211_WEP_CRCLEN)) -#define IEEE80211_MAX_LEN (2300 + FCS_LEN + \ - (IEEE80211_WEP_IVLEN + \ - IEEE80211_WEP_KIDLEN + \ - IEEE80211_WEP_CRCLEN)) - -#define MAX_REG_ADD_COUNT 129 #define MAX_RATE_POWER 63 enum ath9k_power_mode { @@ -707,13 +697,6 @@ enum phytype { }; #define PHY_CCK PHY_DS -enum start_adhoc_option { - START_ADHOC_NO_11A, - START_ADHOC_PER_11D, - START_ADHOC_IN_11A, - START_ADHOC_IN_11B, -}; - enum ath9k_tp_scale { ATH9K_TP_SCALE_MAX = 0, ATH9K_TP_SCALE_50, @@ -769,14 +752,11 @@ struct ath9k_node_stats { #define ATH9K_RSSI_EP_MULTIPLIER (1<<7) -enum ath9k_gpio_output_mux_type { - ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT, - ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED, - ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED, - ATH9K_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED, - ATH9K_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED, - ATH9K_GPIO_OUTPUT_MUX_NUM_ENTRIES -}; +#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0 +#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1 +#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED 2 +#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED 5 +#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED 6 enum { ATH9K_RESET_POWER_ON, @@ -790,19 +770,20 @@ struct ath_hal { u32 ah_magic; u16 ah_devid; u16 ah_subvendorid; - struct ath_softc *ah_sc; - void __iomem *ah_sh; - u16 ah_countryCode; u32 ah_macVersion; u16 ah_macRev; u16 ah_phyRev; u16 ah_analog5GhzRev; u16 ah_analog2GhzRev; - u8 ah_decompMask[ATH9K_DECOMP_MASK_SIZE]; - u32 ah_flags; + + void __iomem *ah_sh; + struct ath_softc *ah_sc; enum ath9k_opmode ah_opmode; struct ath9k_ops_config ah_config; struct ath9k_hw_capabilities ah_caps; + + u16 ah_countryCode; + u32 ah_flags; int16_t ah_powerLimit; u16 ah_maxPowerLevel; u32 ah_tpScale; @@ -812,15 +793,17 @@ struct ath_hal { u16 ah_currentRD5G; u16 ah_currentRD2G; char ah_iso[4]; - enum start_adhoc_option ah_adHocMode; - bool ah_commonMode; + struct ath9k_channel ah_channels[150]; - u32 ah_nchan; struct ath9k_channel *ah_curchan; - u16 ah_rfsilent; - bool ah_rfkillEnabled; + u32 ah_nchan; + bool ah_isPciExpress; u16 ah_txTrigLevel; + u16 ah_rfsilent; + u32 ah_rfkill_gpio; + u32 ah_rfkill_polarity; + #ifndef ATH_NF_PER_CHAN struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS]; #endif @@ -853,7 +836,7 @@ bool ath9k_regd_init_channels(struct ath_hal *ah, u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags); enum ath9k_int ath9k_hw_set_interrupts(struct ath_hal *ah, enum ath9k_int ints); -bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, +bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode, u8 txchainmask, u8 rxchainmask, @@ -871,7 +854,7 @@ bool ath9k_hw_calibrate(struct ath_hal *ah, u8 rxchainmask, bool longcal, bool *isCalDone); -int16_t ath9k_hw_getchan_noise(struct ath_hal *ah, +s16 ath9k_hw_getchan_noise(struct ath_hal *ah, struct ath9k_channel *chan); void ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid, u16 assocId); @@ -1018,4 +1001,9 @@ void ath9k_hw_get_channel_centers(struct ath_hal *ah, bool ath9k_get_channel_edges(struct ath_hal *ah, u16 flags, u16 *low, u16 *high); +void ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, + u32 ah_signal_type); +void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 value); +u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio); +void ath9k_hw_cfg_gpio_input(struct ath_hal *ah, u32 gpio); #endif diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 00a0eaa0886..9e15c30bbc0 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -16,7 +16,6 @@ /* Implementation of beacon processing. */ -#include <asm/unaligned.h> #include "core.h" /* @@ -26,14 +25,13 @@ * the operating mode of the station (AP or AdHoc). Parameters are AIFS * settings and channel width min/max */ - static int ath_beaconq_config(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; struct ath9k_tx_queue_info qi; ath9k_hw_get_txq_props(ah, sc->sc_bhalq, &qi); - if (sc->sc_opmode == ATH9K_M_HOSTAP) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* Always burst out beacon and CAB traffic. */ qi.tqi_aifs = 1; qi.tqi_cwmin = 0; @@ -63,19 +61,18 @@ static int ath_beaconq_config(struct ath_softc *sc) * up all required antenna switch parameters, rate codes, and channel flags. * Beacons are always sent out at the lowest rate, and are not retried. */ - static void ath_beacon_setup(struct ath_softc *sc, - struct ath_vap *avp, struct ath_buf *bf) + struct ath_vap *avp, struct ath_buf *bf) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; struct ath_hal *ah = sc->sc_ah; struct ath_desc *ds; - int flags, antenna; + struct ath9k_11n_rate_series series[4]; const struct ath9k_rate_table *rt; + int flags, antenna; u8 rix, rate; int ctsrate = 0; int ctsduration = 0; - struct ath9k_11n_rate_series series[4]; DPRINTF(sc, ATH_DBG_BEACON, "%s: m %p len %u\n", __func__, skb, skb->len); @@ -85,7 +82,7 @@ static void ath_beacon_setup(struct ath_softc *sc, flags = ATH9K_TXDESC_NOACK; - if (sc->sc_opmode == ATH9K_M_IBSS && + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { ds->ds_link = bf->bf_daddr; /* self-linked */ flags |= ATH9K_TXDESC_VEOL; @@ -111,27 +108,28 @@ static void ath_beacon_setup(struct ath_softc *sc, rix = 0; rt = sc->sc_currates; rate = rt->info[rix].rateCode; - if (sc->sc_flags & ATH_PREAMBLE_SHORT) + if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) rate |= rt->info[rix].shortPreamble; - ath9k_hw_set11n_txdesc(ah, ds - , skb->len + FCS_LEN /* frame length */ - , ATH9K_PKT_TYPE_BEACON /* Atheros packet type */ - , avp->av_btxctl.txpower /* txpower XXX */ - , ATH9K_TXKEYIX_INVALID /* no encryption */ - , ATH9K_KEY_TYPE_CLEAR /* no encryption */ - , flags /* no ack, veol for beacons */ + ath9k_hw_set11n_txdesc(ah, ds, + skb->len + FCS_LEN, /* frame length */ + ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */ + avp->av_btxctl.txpower, /* txpower XXX */ + ATH9K_TXKEYIX_INVALID, /* no encryption */ + ATH9K_KEY_TYPE_CLEAR, /* no encryption */ + flags /* no ack, + veol for beacons */ ); /* NB: beacon's BufLen must be a multiple of 4 bytes */ - ath9k_hw_filltxdesc(ah, ds - , roundup(skb->len, 4) /* buffer length */ - , true /* first segment */ - , true /* last segment */ - , ds /* first descriptor */ + ath9k_hw_filltxdesc(ah, ds, + roundup(skb->len, 4), /* buffer length */ + true, /* first segment */ + true, /* last segment */ + ds /* first descriptor */ ); - memzero(series, sizeof(struct ath9k_11n_rate_series) * 4); + memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); series[0].Tries = 1; series[0].Rate = rate; series[0].ChSel = sc->sc_tx_chainmask; @@ -140,55 +138,6 @@ static void ath_beacon_setup(struct ath_softc *sc, ctsrate, ctsduration, series, 4, 0); } -/* Move everything from the vap's mcast queue to the hardware cab queue. - * Caller must hold mcasq lock and cabq lock - * XXX MORE_DATA bit? - */ -static void empty_mcastq_into_cabq(struct ath_hal *ah, - struct ath_txq *mcastq, struct ath_txq *cabq) -{ - struct ath_buf *bfmcast; - - BUG_ON(list_empty(&mcastq->axq_q)); - - bfmcast = list_first_entry(&mcastq->axq_q, struct ath_buf, list); - - /* link the descriptors */ - if (!cabq->axq_link) - ath9k_hw_puttxbuf(ah, cabq->axq_qnum, bfmcast->bf_daddr); - else - *cabq->axq_link = bfmcast->bf_daddr; - - /* append the private vap mcast list to the cabq */ - - cabq->axq_depth += mcastq->axq_depth; - cabq->axq_totalqueued += mcastq->axq_totalqueued; - cabq->axq_linkbuf = mcastq->axq_linkbuf; - cabq->axq_link = mcastq->axq_link; - list_splice_tail_init(&mcastq->axq_q, &cabq->axq_q); - mcastq->axq_depth = 0; - mcastq->axq_totalqueued = 0; - mcastq->axq_linkbuf = NULL; - mcastq->axq_link = NULL; -} - -/* This is only run at DTIM. We move everything from the vap's mcast queue - * to the hardware cab queue. Caller must hold the mcastq lock. */ -static void trigger_mcastq(struct ath_hal *ah, - struct ath_txq *mcastq, struct ath_txq *cabq) -{ - spin_lock_bh(&cabq->axq_lock); - - if (!list_empty(&mcastq->axq_q)) - empty_mcastq_into_cabq(ah, mcastq, cabq); - - /* cabq is gated by beacon so it is safe to start here */ - if (!list_empty(&cabq->axq_q)) - ath9k_hw_txstart(ah, cabq->axq_qnum); - - spin_unlock_bh(&cabq->axq_lock); -} - /* * Generate beacon frame and queue cab data for a vap. * @@ -199,39 +148,36 @@ static void trigger_mcastq(struct ath_hal *ah, */ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) { - struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf; struct ath_vap *avp; struct sk_buff *skb; - int cabq_depth; - int mcastq_depth; - int is_beacon_dtim = 0; - unsigned int curlen; struct ath_txq *cabq; - struct ath_txq *mcastq; struct ieee80211_tx_info *info; + int cabq_depth; + avp = sc->sc_vaps[if_id]; + ASSERT(avp); - mcastq = &avp->av_mcastq; cabq = sc->sc_cabq; - ASSERT(avp); - if (avp->av_bcbuf == NULL) { DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n", __func__, avp, avp->av_bcbuf); return NULL; } + bf = avp->av_bcbuf; - skb = (struct sk_buff *) bf->bf_mpdu; + skb = (struct sk_buff *)bf->bf_mpdu; + if (skb) { + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); + } - /* - * Update dynamic beacon contents. If this returns - * non-zero then we need to remap the memory because - * the beacon frame changed size (probably because - * of the TIM bitmap). - */ - curlen = skb->len; + skb = ieee80211_beacon_get(sc->hw, avp->av_if_data); + bf->bf_mpdu = skb; + if (skb == NULL) + return NULL; info = IEEE80211_SKB_CB(skb); if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { @@ -239,29 +185,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) * TODO: make sure the seq# gets assigned properly (vs. other * TX frames) */ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; sc->seq_no += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); } - /* XXX: spin_lock_bh should not be used here, but sparse bitches - * otherwise. We should fix sparse :) */ - spin_lock_bh(&mcastq->axq_lock); - mcastq_depth = avp->av_mcastq.axq_depth; - - if (ath_update_beacon(sc, if_id, &avp->av_boff, skb, mcastq_depth) == - 1) { - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - } else { - pci_dma_sync_single_for_cpu(sc->pdev, - bf->bf_buf_addr, - skb_tailroom(skb), - PCI_DMA_TODEVICE); - } + bf->bf_buf_addr = bf->bf_dmacontext = + pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); + + skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); /* * if the CABQ traffic from previous DTIM is pending and the current @@ -275,9 +210,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) cabq_depth = cabq->axq_depth; spin_unlock_bh(&cabq->axq_lock); - is_beacon_dtim = avp->av_boff.bo_tim[4] & 1; - - if (mcastq_depth && is_beacon_dtim && cabq_depth) { + if (skb && cabq_depth) { /* * Unlock the cabq lock as ath_tx_draintxq acquires * the lock again which is a common function and that @@ -297,10 +230,11 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) * Enable the CAB queue before the beacon queue to * insure cab frames are triggered by this beacon. */ - if (is_beacon_dtim) - trigger_mcastq(ah, mcastq, cabq); + while (skb) { + ath_tx_cabq(sc, skb); + skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); + } - spin_unlock_bh(&mcastq->axq_lock); return bf; } @@ -308,7 +242,6 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) * Startup beacon transmission for adhoc mode when they are sent entirely * by the hardware using the self-linked descriptor + veol trick. */ - static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) { struct ath_hal *ah = sc->sc_ah; @@ -345,12 +278,11 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) * min/max, and enable aifs). The info structure does not need to be * persistant. */ - int ath_beaconq_setup(struct ath_hal *ah) { struct ath9k_tx_queue_info qi; - memzero(&qi, sizeof(qi)); + memset(&qi, 0, sizeof(qi)); qi.tqi_aifs = 1; qi.tqi_cwmin = 0; qi.tqi_cwmax = 0; @@ -366,29 +298,27 @@ int ath_beaconq_setup(struct ath_hal *ah) * the ATH interface. This routine also calculates the beacon "slot" for * staggared beacons in the mBSSID case. */ - int ath_beacon_alloc(struct ath_softc *sc, int if_id) { struct ath_vap *avp; - struct ieee80211_hdr *wh; + struct ieee80211_hdr *hdr; struct ath_buf *bf; struct sk_buff *skb; + __le64 tstamp; avp = sc->sc_vaps[if_id]; ASSERT(avp); /* Allocate a beacon descriptor if we haven't done so. */ if (!avp->av_bcbuf) { - /* - * Allocate beacon state for hostap/ibss. We know - * a buffer is available. - */ + /* Allocate beacon state for hostap/ibss. We know + * a buffer is available. */ avp->av_bcbuf = list_first_entry(&sc->sc_bbuf, - struct ath_buf, list); + struct ath_buf, list); list_del(&avp->av_bcbuf->list); - if (sc->sc_opmode == ATH9K_M_HOSTAP || + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { int slot; /* @@ -421,17 +351,16 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf = avp->av_bcbuf; if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; } /* - * NB: the beacon data buffer must be 32-bit aligned; - * we assume the wbuf routines will return us something - * with this alignment (perhaps should assert). - * FIXME: Fill avp->av_boff.bo_tim,avp->av_btxctl.txpower and + * NB: the beacon data buffer must be 32-bit aligned. + * FIXME: Fill avp->av_btxctl.txpower and * avp->av_btxctl.shortPreamble */ skb = ieee80211_beacon_get(sc->hw, avp->av_if_data); @@ -441,6 +370,9 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) return -ENOMEM; } + tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; + sc->bc_tstamp = le64_to_cpu(tstamp); + /* * Calculate a TSF adjustment factor required for * staggered beacons. Note that we assume the format @@ -452,9 +384,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) __le64 val; int intval; - /* FIXME: Use default value for now: Sujith */ - - intval = ATH_DEFAULT_BINTVAL; + intval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; /* * The beacon interval is in TU's; the TSF in usecs. @@ -475,12 +406,14 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) __func__, "stagger", avp->av_bslot, intval, (unsigned long long)tsfadjust); - wh = (struct ieee80211_hdr *)skb->data; - memcpy(&wh[1], &val, sizeof(val)); + hdr = (struct ieee80211_hdr *)skb->data; + memcpy(&hdr[1], &val, sizeof(val)); } - bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = bf->bf_dmacontext = + pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); bf->bf_mpdu = skb; return 0; @@ -490,9 +423,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) * Reclaim beacon resources and return buffer to the pool. * * Checks the VAP to put the beacon frame buffer back to the ATH object - * queue, and de-allocates any wbuf frames that were sent as CAB traffic. + * queue, and de-allocates any skbs that were sent as CAB traffic. */ - void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) { if (avp->av_bcbuf != NULL) { @@ -506,8 +438,9 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) bf = avp->av_bcbuf; if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; } @@ -518,44 +451,14 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) } /* - * Reclaim beacon resources and return buffer to the pool. - * - * This function will free any wbuf frames that are still attached to the - * beacon buffers in the ATH object. Note that this does not de-allocate - * any wbuf objects that are in the transmit queue and have not yet returned - * to the ATH object. -*/ - -void ath_beacon_free(struct ath_softc *sc) -{ - struct ath_buf *bf; - - list_for_each_entry(bf, &sc->sc_bbuf, list) { - if (bf->bf_mpdu != NULL) { - struct sk_buff *skb = (struct sk_buff *) bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - dev_kfree_skb_any(skb); - bf->bf_mpdu = NULL; - } - } -} - -/* * Tasklet for Sending Beacons * * Transmit one or more beacon frames at SWBA. Dynamic updates to the frame * contents are done as needed and the slot time is also adjusted based on * current state. - * - * This tasklet is not scheduled, it's called in ISR context. */ - void ath9k_beacon_tasklet(unsigned long data) { -#define TSF_TO_TU(_h,_l) \ - ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) - struct ath_softc *sc = (struct ath_softc *)data; struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf = NULL; @@ -568,7 +471,7 @@ void ath9k_beacon_tasklet(unsigned long data) u32 tsftu; u16 intval; - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, &rx_clear, &rx_frame, @@ -581,6 +484,8 @@ void ath9k_beacon_tasklet(unsigned long data) * and wait for the next. Missed beacons indicate * a problem and should not occur. If we miss too * many consecutive beacons reset the device. + * + * FIXME: Clean up this mess !! */ if (ath9k_hw_numtxpending(ah, sc->sc_bhalq) != 0) { sc->sc_bmisscount++; @@ -590,25 +495,22 @@ void ath9k_beacon_tasklet(unsigned long data) * (in that layer). */ if (sc->sc_bmisscount < BSTUCK_THRESH) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { DPRINTF(sc, ATH_DBG_BEACON, "%s: missed %u consecutive beacons\n", __func__, sc->sc_bmisscount); if (show_cycles) { /* - * Display cycle counter stats - * from HW to aide in debug of - * stickiness. + * Display cycle counter stats from HW + * to aide in debug of stickiness. */ - DPRINTF(sc, - ATH_DBG_BEACON, + DPRINTF(sc, ATH_DBG_BEACON, "%s: busy times: rx_clear=%d, " "rx_frame=%d, tx_frame=%d\n", __func__, rx_clear, rx_frame, tx_frame); } else { - DPRINTF(sc, - ATH_DBG_BEACON, + DPRINTF(sc, ATH_DBG_BEACON, "%s: unable to obtain " "busy times\n", __func__); } @@ -618,10 +520,9 @@ void ath9k_beacon_tasklet(unsigned long data) __func__, sc->sc_bmisscount); } } else if (sc->sc_bmisscount >= BSTUCK_THRESH) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { if (sc->sc_bmisscount == BSTUCK_THRESH) { - DPRINTF(sc, - ATH_DBG_BEACON, + DPRINTF(sc, ATH_DBG_BEACON, "%s: beacon is officially " "stuck\n", __func__); ath9k_hw_dmaRegDump(ah); @@ -633,13 +534,12 @@ void ath9k_beacon_tasklet(unsigned long data) ath_bstuck_process(sc); } } - return; } + if (sc->sc_bmisscount != 0) { - if (sc->sc_noreset) { - DPRINTF(sc, - ATH_DBG_BEACON, + if (sc->sc_flags & SC_OP_NO_RESET) { + DPRINTF(sc, ATH_DBG_BEACON, "%s: resume beacon xmit after %u misses\n", __func__, sc->sc_bmisscount); } else { @@ -656,17 +556,19 @@ void ath9k_beacon_tasklet(unsigned long data) * on the tsf to safeguard against missing an swba. */ - /* FIXME: Use default value for now - Sujith */ - intval = ATH_DEFAULT_BINTVAL; + intval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU(tsf>>32, tsf); slot = ((tsftu % intval) * ATH_BCBUF) / intval; if_id = sc->sc_bslot[(slot + 1) % ATH_BCBUF]; + DPRINTF(sc, ATH_DBG_BEACON, - "%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n", - __func__, slot, (unsigned long long) tsf, tsftu, - intval, if_id); + "%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n", + __func__, slot, (unsigned long long)tsf, tsftu, + intval, if_id); + bfaddr = 0; if (if_id != ATH_IF_ID_ANY) { bf = ath_beacon_generate(sc, if_id); @@ -717,22 +619,20 @@ void ath9k_beacon_tasklet(unsigned long data) sc->ast_be_xmit += bc; /* XXX per-vap? */ } -#undef TSF_TO_TU } /* * Tasklet for Beacon Stuck processing * * Processing for Beacon Stuck. - * Basically calls the ath_internal_reset function to reset the chip. + * Basically resets the chip. */ - void ath_bstuck_process(struct ath_softc *sc) { DPRINTF(sc, ATH_DBG_BEACON, "%s: stuck beacon; resetting (bmiss count %u)\n", __func__, sc->sc_bmisscount); - ath_internal_reset(sc); + ath_reset(sc, false); } /* @@ -750,40 +650,32 @@ void ath_bstuck_process(struct ath_softc *sc) * interrupt when we stop seeing beacons from the AP * we've associated with. */ - void ath_beacon_config(struct ath_softc *sc, int if_id) { -#define TSF_TO_TU(_h,_l) \ - ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) struct ath_hal *ah = sc->sc_ah; - u32 nexttbtt, intval; struct ath_beacon_config conf; enum ath9k_opmode av_opmode; + u32 nexttbtt, intval; if (if_id != ATH_IF_ID_ANY) av_opmode = sc->sc_vaps[if_id]->av_opmode; else - av_opmode = sc->sc_opmode; + av_opmode = sc->sc_ah->ah_opmode; - memzero(&conf, sizeof(struct ath_beacon_config)); + memset(&conf, 0, sizeof(struct ath_beacon_config)); - /* FIXME: Use default values for now - Sujith */ - /* Query beacon configuration first */ - /* - * Protocol stack doesn't support dynamic beacon configuration, - * use default configurations. - */ - conf.beacon_interval = ATH_DEFAULT_BINTVAL; + conf.beacon_interval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; conf.listen_interval = 1; conf.dtim_period = conf.beacon_interval; conf.dtim_count = 1; conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval; /* extract tstamp from last beacon and convert to TU */ - nexttbtt = TSF_TO_TU(get_unaligned_le32(conf.u.last_tstamp + 4), - get_unaligned_le32(conf.u.last_tstamp)); + nexttbtt = TSF_TO_TU(sc->bc_tstamp >> 32, sc->bc_tstamp); + /* XXX conditionalize multi-bss support? */ - if (sc->sc_opmode == ATH9K_M_HOSTAP) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* * For multi-bss ap support beacons are either staggered * evenly over N slots or burst together. For the former @@ -797,14 +689,16 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; } - if (nexttbtt == 0) /* e.g. for ap mode */ + if (nexttbtt == 0) /* e.g. for ap mode */ nexttbtt = intval; - else if (intval) /* NB: can be 0 for monitor mode */ + else if (intval) /* NB: can be 0 for monitor mode */ nexttbtt = roundup(nexttbtt, intval); + DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n", __func__, nexttbtt, intval, conf.beacon_interval); + /* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */ - if (sc->sc_opmode == ATH9K_M_STA) { + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) { struct ath9k_beacon_state bs; u64 tsf; u32 tsftu; @@ -816,19 +710,19 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * last beacon we received (which may be none). */ dtimperiod = conf.dtim_period; - if (dtimperiod <= 0) /* NB: 0 if not known */ + if (dtimperiod <= 0) /* NB: 0 if not known */ dtimperiod = 1; dtimcount = conf.dtim_count; - if (dtimcount >= dtimperiod) /* NB: sanity check */ - dtimcount = 0; /* XXX? */ - cfpperiod = 1; /* NB: no PCF support yet */ + if (dtimcount >= dtimperiod) /* NB: sanity check */ + dtimcount = 0; + cfpperiod = 1; /* NB: no PCF support yet */ cfpcount = 0; sleepduration = conf.listen_interval * intval; if (sleepduration <= 0) sleepduration = intval; -#define FUDGE 2 +#define FUDGE 2 /* * Pull nexttbtt forward to reflect the current * TSF and calculate dtim+cfp state for the result. @@ -844,7 +738,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) } } while (nexttbtt < tsftu); #undef FUDGE - memzero(&bs, sizeof(bs)); + memset(&bs, 0, sizeof(bs)); bs.bs_intval = intval; bs.bs_nexttbtt = nexttbtt; bs.bs_dtimperiod = dtimperiod*intval; @@ -852,6 +746,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; bs.bs_cfpmaxduration = 0; + /* * Calculate the number of consecutive beacons to miss * before taking a BMISS interrupt. The configuration @@ -860,9 +755,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * result to at most 15 beacons. */ if (sleepduration > intval) { - bs.bs_bmissthreshold = - conf.listen_interval * - ATH_DEFAULT_BMISS_LIMIT / 2; + bs.bs_bmissthreshold = conf.listen_interval * + ATH_DEFAULT_BMISS_LIMIT / 2; } else { bs.bs_bmissthreshold = DIV_ROUND_UP(conf.bmiss_timeout, intval); @@ -882,8 +776,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * XXX fixed at 100ms */ - bs.bs_sleepduration = - roundup(IEEE80211_MS_TO_TU(100), sleepduration); + bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), + sleepduration); if (bs.bs_sleepduration > bs.bs_dtimperiod) bs.bs_sleepduration = bs.bs_dtimperiod; @@ -899,19 +793,19 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) "cfp:period %u " "maxdur %u " "next %u " - "timoffset %u\n" - , __func__ - , (unsigned long long)tsf, tsftu - , bs.bs_intval - , bs.bs_nexttbtt - , bs.bs_dtimperiod - , bs.bs_nextdtim - , bs.bs_bmissthreshold - , bs.bs_sleepduration - , bs.bs_cfpperiod - , bs.bs_cfpmaxduration - , bs.bs_cfpnext - , bs.bs_timoffset + "timoffset %u\n", + __func__, + (unsigned long long)tsf, tsftu, + bs.bs_intval, + bs.bs_nexttbtt, + bs.bs_dtimperiod, + bs.bs_nextdtim, + bs.bs_bmissthreshold, + bs.bs_sleepduration, + bs.bs_cfpperiod, + bs.bs_cfpmaxduration, + bs.bs_cfpnext, + bs.bs_timoffset ); ath9k_hw_set_interrupts(ah, 0); @@ -924,12 +818,12 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) ath9k_hw_set_interrupts(ah, 0); if (nexttbtt == intval) intval |= ATH9K_BEACON_RESET_TSF; - if (sc->sc_opmode == ATH9K_M_IBSS) { + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { /* * Pull nexttbtt forward to reflect the current - * TSF . + * TSF */ -#define FUDGE 2 +#define FUDGE 2 if (!(intval & ATH9K_BEACON_RESET_TSF)) { tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU((u32)(tsf>>32), @@ -956,7 +850,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) sc->sc_imask |= ATH9K_INT_SWBA; ath_beaconq_config(sc); - } else if (sc->sc_opmode == ATH9K_M_HOSTAP) { + } else if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* * In AP mode we enable the beacon timers and * SWBA interrupts to prepare beacon frames. @@ -972,11 +866,10 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * When using a self-linked beacon descriptor in * ibss mode load it once here. */ - if (sc->sc_opmode == ATH9K_M_IBSS && + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) ath_beacon_start_adhoc(sc, 0); } -#undef TSF_TO_TU } /* Function to collect beacon rssi data and resync beacon if necessary */ @@ -988,5 +881,5 @@ void ath_beacon_sync(struct ath_softc *sc, int if_id) * beacon frame we just received. */ ath_beacon_config(sc, if_id); - sc->sc_beacons = 1; + sc->sc_flags |= SC_OP_BEACONS; } diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index f6c45288d0e..c5033f6f42a 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -21,9 +21,6 @@ static int ath_outdoor; /* enable outdoor use */ -static const u8 ath_bcast_mac[ETH_ALEN] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - static u32 ath_chainmask_sel_up_rssi_thres = ATH_CHAINMASK_SEL_UP_RSSI_THRES; static u32 ath_chainmask_sel_down_rssi_thres = @@ -54,10 +51,8 @@ static void bus_read_cachesize(struct ath_softc *sc, int *csz) * Set current operating mode * * This function initializes and fills the rate table in the ATH object based - * on the operating mode. The blink rates are also set up here, although - * they have been superceeded by the ath_led module. + * on the operating mode. */ - static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) { const struct ath9k_rate_table *rt; @@ -70,7 +65,7 @@ static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) for (i = 0; i < rt->rateCount; i++) sc->sc_rixmap[rt->info[i].rateCode] = (u8) i; - memzero(sc->sc_hwmap, sizeof(sc->sc_hwmap)); + memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap)); for (i = 0; i < 256; i++) { u8 ix = rt->rateCodeToIndex[i]; @@ -235,7 +230,7 @@ static int ath_setup_channels(struct ath_softc *sc) * Determine mode from channel flags * * This routine will provide the enumerated WIRELESSS_MODE value based - * on the settings of the channel flags. If ho valid set of flags + * on the settings of the channel flags. If no valid set of flags * exist, the lowest mode (11b) is selected. */ @@ -260,7 +255,8 @@ static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) else if (chan->chanmode == CHANNEL_G_HT40MINUS) return ATH9K_MODE_11NG_HT40MINUS; - /* NB: should not get here */ + WARN_ON(1); /* should not get here */ + return ATH9K_MODE_11B; } @@ -275,14 +271,12 @@ static int ath_stop(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %u\n", - __func__, sc->sc_invalid); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %ld\n", + __func__, sc->sc_flags & SC_OP_INVALID); /* * Shutdown the hardware and driver: * stop output from above - * reset 802.11 state machine - * (sends station deassoc/deauth frames) * turn off timers * disable interrupts * clear transmit machinery @@ -294,10 +288,8 @@ static int ath_stop(struct ath_softc *sc) * hardware is gone (invalid). */ - if (!sc->sc_invalid) - ath9k_hw_set_interrupts(ah, 0); ath_draintxq(sc, false); - if (!sc->sc_invalid) { + if (!(sc->sc_flags & SC_OP_INVALID)) { ath_stoprecv(sc); ath9k_hw_phy_disable(ah); } else @@ -307,56 +299,6 @@ static int ath_stop(struct ath_softc *sc) } /* - * Start Scan - * - * This function is called when starting a channel scan. It will perform - * power save wakeup processing, set the filter for the scan, and get the - * chip ready to send broadcast packets out during the scan. -*/ - -void ath_scan_start(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - u32 rfilt; - u32 now = (u32) jiffies_to_msecs(get_timestamp()); - - sc->sc_scanning = 1; - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(ah, rfilt); - ath9k_hw_write_associd(ah, ath_bcast_mac, 0); - - /* Restore previous power management state. */ - - DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0\n", - now / 1000, now % 1000, __func__, rfilt); -} - -/* - * Scan End - * - * This routine is called by the upper layer when the scan is completed. This - * will set the filters back to normal operating mode, set the BSSID to the - * correct value, and restore the power save state. -*/ - -void ath_scan_end(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - u32 rfilt; - u32 now = (u32) jiffies_to_msecs(get_timestamp()); - - sc->sc_scanning = 0; - /* Request for a full reset due to rx packet filter changes */ - sc->sc_full_reset = 1; - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(ah, rfilt); - ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid); - - DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0x%x\n", - now / 1000, now % 1000, __func__, rfilt, sc->sc_curaid); -} - -/* * Set the current channel * * Set/change channels. If the channel is really being changed, it's done @@ -367,25 +309,23 @@ int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) { struct ath_hal *ah = sc->sc_ah; bool fastcc = true, stopped; - enum ath9k_ht_macmode ht_macmode; - if (sc->sc_invalid) /* if the device is invalid or removed */ + if (sc->sc_flags & SC_OP_INVALID) /* the device is invalid or removed */ return -EIO; DPRINTF(sc, ATH_DBG_CONFIG, "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", __func__, - ath9k_hw_mhz2ieee(ah, sc->sc_curchan.channel, - sc->sc_curchan.channelFlags), - sc->sc_curchan.channel, + ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, + sc->sc_ah->ah_curchan->channelFlags), + sc->sc_ah->ah_curchan->channel, ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), hchan->channel, hchan->channelFlags); - ht_macmode = ath_cwm_macmode(sc); - - if (hchan->channel != sc->sc_curchan.channel || - hchan->channelFlags != sc->sc_curchan.channelFlags || - sc->sc_update_chainmask || sc->sc_full_reset) { + if (hchan->channel != sc->sc_ah->ah_curchan->channel || + hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || + (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || + (sc->sc_flags & SC_OP_FULL_RESET)) { int status; /* * This is only performed if the channel settings have @@ -404,15 +344,16 @@ int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) * to flush data frames already in queue because of * changing channel. */ - if (!stopped || sc->sc_full_reset) + if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) fastcc = false; spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, hchan, - ht_macmode, sc->sc_tx_chainmask, - sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, - fastcc, &status)) { + if (!ath9k_hw_reset(ah, hchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, + sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, + fastcc, &status)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: unable to reset channel %u (%uMhz) " "flags 0x%x hal status %u\n", __func__, @@ -424,9 +365,8 @@ int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) } spin_unlock_bh(&sc->sc_resetlock); - sc->sc_curchan = *hchan; - sc->sc_update_chainmask = 0; - sc->sc_full_reset = 0; + sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; + sc->sc_flags &= ~SC_OP_FULL_RESET; /* Re-enable rx framework */ if (ath_startrecv(sc) != 0) { @@ -477,7 +417,7 @@ static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an) { struct ath_chainmask_sel *cm = &an->an_chainmask_sel; - memzero(cm, sizeof(struct ath_chainmask_sel)); + memset(cm, 0, sizeof(struct ath_chainmask_sel)); cm->cur_tx_mask = sc->sc_tx_chainmask; cm->cur_rx_mask = sc->sc_rx_chainmask; @@ -537,7 +477,7 @@ int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an) void ath_update_chainmask(struct ath_softc *sc, int is_ht) { - sc->sc_update_chainmask = 1; + sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; if (is_ht) { sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; @@ -550,66 +490,126 @@ void ath_update_chainmask(struct ath_softc *sc, int is_ht) __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask); } -/******************/ -/* VAP management */ -/******************/ +/*******/ +/* ANI */ +/*******/ /* - * VAP in Listen mode - * - * This routine brings the VAP out of the down state into a "listen" state - * where it waits for association requests. This is used in AP and AdHoc - * modes. -*/ + * This routine performs the periodic noise floor calibration function + * that is used to adjust and optimize the chip performance. This + * takes environmental changes (location, temperature) into account. + * When the task is complete, it reschedules itself depending on the + * appropriate interval that was calculated. + */ -int ath_vap_listen(struct ath_softc *sc, int if_id) +static void ath_ani_calibrate(unsigned long data) { - struct ath_hal *ah = sc->sc_ah; - struct ath_vap *avp; - u32 rfilt = 0; - DECLARE_MAC_BUF(mac); + struct ath_softc *sc; + struct ath_hal *ah; + bool longcal = false; + bool shortcal = false; + bool aniflag = false; + unsigned int timestamp = jiffies_to_msecs(jiffies); + u32 cal_interval; - avp = sc->sc_vaps[if_id]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n", - __func__, if_id); - return -EINVAL; - } + sc = (struct ath_softc *)data; + ah = sc->sc_ah; -#ifdef CONFIG_SLOW_ANT_DIV - ath_slow_ant_div_stop(&sc->sc_antdiv); -#endif + /* + * don't calibrate when we're scanning. + * we are most likely not on our home channel. + */ + if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC) + return; - /* update ratectrl about the new state */ - ath_rate_newstate(sc, avp); + /* Long calibration runs independently of short calibration. */ + if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) { + longcal = true; + DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n", + __func__, jiffies); + sc->sc_ani.sc_longcal_timer = timestamp; + } - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(ah, rfilt); + /* Short calibration applies only while sc_caldone is false */ + if (!sc->sc_ani.sc_caldone) { + if ((timestamp - sc->sc_ani.sc_shortcal_timer) >= + ATH_SHORT_CALINTERVAL) { + shortcal = true; + DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n", + __func__, jiffies); + sc->sc_ani.sc_shortcal_timer = timestamp; + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } else { + if ((timestamp - sc->sc_ani.sc_resetcal_timer) >= + ATH_RESTART_CALINTERVAL) { + ath9k_hw_reset_calvalid(ah, ah->ah_curchan, + &sc->sc_ani.sc_caldone); + if (sc->sc_ani.sc_caldone) + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } - if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS) { - memcpy(sc->sc_curbssid, ath_bcast_mac, ETH_ALEN); - ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid); - } else - sc->sc_curaid = 0; + /* Verify whether we must check ANI */ + if ((timestamp - sc->sc_ani.sc_checkani_timer) >= + ATH_ANI_POLLINTERVAL) { + aniflag = true; + sc->sc_ani.sc_checkani_timer = timestamp; + } - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: RX filter 0x%x bssid %s aid 0x%x\n", - __func__, rfilt, print_mac(mac, - sc->sc_curbssid), sc->sc_curaid); + /* Skip all processing if there's nothing to do. */ + if (longcal || shortcal || aniflag) { + /* Call ANI routine if necessary */ + if (aniflag) + ath9k_hw_ani_monitor(ah, &sc->sc_halstats, + ah->ah_curchan); + + /* Perform calibration if necessary */ + if (longcal || shortcal) { + bool iscaldone = false; + + if (ath9k_hw_calibrate(ah, ah->ah_curchan, + sc->sc_rx_chainmask, longcal, + &iscaldone)) { + if (longcal) + sc->sc_ani.sc_noise_floor = + ath9k_hw_getchan_noise(ah, + ah->ah_curchan); + + DPRINTF(sc, ATH_DBG_ANI, + "%s: calibrate chan %u/%x nf: %d\n", + __func__, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags, + sc->sc_ani.sc_noise_floor); + } else { + DPRINTF(sc, ATH_DBG_ANY, + "%s: calibrate chan %u/%x failed\n", + __func__, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags); + } + sc->sc_ani.sc_caldone = iscaldone; + } + } /* - * XXXX - * Disable BMISS interrupt when we're not associated - */ - ath9k_hw_set_interrupts(ah, - sc->sc_imask & ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - /* need to reconfigure the beacons when it moves to RUN */ - sc->sc_beacons = 0; + * Set timer interval based on previous results. + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ - return 0; + cal_interval = ATH_ANI_POLLINTERVAL; + if (!sc->sc_ani.sc_caldone) + cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL); + + mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval)); } +/******************/ +/* VAP management */ +/******************/ + int ath_vap_attach(struct ath_softc *sc, int if_id, struct ieee80211_vif *if_data, @@ -642,21 +642,19 @@ int ath_vap_attach(struct ath_softc *sc, if (avp == NULL) return -ENOMEM; - memzero(avp, sizeof(struct ath_vap)); + memset(avp, 0, sizeof(struct ath_vap)); avp->av_if_data = if_data; /* Set the VAP opmode */ avp->av_opmode = opmode; avp->av_bslot = -1; - INIT_LIST_HEAD(&avp->av_mcastq.axq_q); - INIT_LIST_HEAD(&avp->av_mcastq.axq_acq); - spin_lock_init(&avp->av_mcastq.axq_lock); - ath9k_hw_set_tsfadjust(sc->sc_ah, 1); + if (opmode == ATH9K_M_HOSTAP) + ath9k_hw_set_tsfadjust(sc->sc_ah, 1); sc->sc_vaps[if_id] = avp; sc->sc_nvaps++; /* Set the device opmode */ - sc->sc_opmode = opmode; + sc->sc_ah->ah_opmode = opmode; /* default VAP configuration */ avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE; @@ -689,9 +687,6 @@ int ath_vap_detach(struct ath_softc *sc, int if_id) ath_stoprecv(sc); /* stop recv side */ ath_flushrecv(sc); /* flush recv queue */ - /* Reclaim any pending mcast bufs on the vap. */ - ath_tx_draintxq(sc, &avp->av_mcastq, false); - kfree(avp); sc->sc_vaps[if_id] = NULL; sc->sc_nvaps--; @@ -728,9 +723,9 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) struct ath_hal *ah = sc->sc_ah; int status; int error = 0; - enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", __func__, sc->sc_opmode); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", + __func__, sc->sc_ah->ah_opmode); /* * Stop anything previously setup. This is safe @@ -752,16 +747,16 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - sc->sc_curchan = *initial_chan; spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, ht_macmode, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { + if (!ath9k_hw_reset(ah, initial_chan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: unable to reset hardware; hal status %u " "(freq %u flags 0x%x)\n", __func__, status, - sc->sc_curchan.channel, sc->sc_curchan.channelFlags); + initial_chan->channel, initial_chan->channelFlags); error = -EIO; spin_unlock_bh(&sc->sc_resetlock); goto done; @@ -802,7 +797,8 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) * Note we only do this (at the moment) for station mode. */ if (ath9k_hw_phycounters(ah) && - ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS))) + ((sc->sc_ah->ah_opmode == ATH9K_M_STA) || + (sc->sc_ah->ah_opmode == ATH9K_M_IBSS))) sc->sc_imask |= ATH9K_INT_MIB; /* * Some hardware processes the TIM IE and fires an @@ -811,7 +807,7 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) * enable the TIM interrupt when operating as station. */ if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && - (sc->sc_opmode == ATH9K_M_STA) && + (sc->sc_ah->ah_opmode == ATH9K_M_STA) && !sc->sc_config.swBeaconProcess) sc->sc_imask |= ATH9K_INT_TIM; /* @@ -823,34 +819,34 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) /* XXX: we must make sure h/w is ready and clear invalid flag * before turning on interrupt. */ - sc->sc_invalid = 0; + sc->sc_flags &= ~SC_OP_INVALID; done: return error; } -/* - * Reset the hardware w/o losing operational state. This is - * basically a more efficient way of doing ath_stop, ath_init, - * followed by state transitions to the current 802.11 - * operational state. Used to recover from errors rx overrun - * and to reset the hardware when rf gain settings must be reset. - */ - -static int ath_reset_start(struct ath_softc *sc, u32 flag) +int ath_reset(struct ath_softc *sc, bool retry_tx) { struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ - ath_draintxq(sc, flag & RESET_RETRY_TXQ); /* stop xmit side */ - ath_stoprecv(sc); /* stop recv side */ - ath_flushrecv(sc); /* flush recv queue */ + ath_draintxq(sc, retry_tx); /* stop xmit */ + ath_stoprecv(sc); /* stop recv */ + ath_flushrecv(sc); /* flush recv queue */ - return 0; -} - -static int ath_reset_end(struct ath_softc *sc, u32 flag) -{ - struct ath_hal *ah = sc->sc_ah; + /* Reset chip */ + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset hardware; hal status %u\n", + __func__, status); + error = -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); if (ath_startrecv(sc) != 0) /* restart recv */ DPRINTF(sc, ATH_DBG_FATAL, @@ -861,16 +857,17 @@ static int ath_reset_end(struct ath_softc *sc, u32 flag) * that changes the channel so update any state that * might change as a result. */ - ath_setcurmode(sc, ath_chan2mode(&sc->sc_curchan)); + ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); - ath_update_txpow(sc); /* update tx power state */ + ath_update_txpow(sc); - if (sc->sc_beacons) + if (sc->sc_flags & SC_OP_BEACONS) ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + ath9k_hw_set_interrupts(ah, sc->sc_imask); /* Restart the txq */ - if (flag & RESET_RETRY_TXQ) { + if (retry_tx) { int i; for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i)) { @@ -880,28 +877,6 @@ static int ath_reset_end(struct ath_softc *sc, u32 flag) } } } - return 0; -} - -int ath_reset(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - int status; - int error = 0; - enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); - - /* NB: indicate channel change so we do a full reset */ - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, - ht_macmode, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset hardware; hal status %u\n", - __func__, status); - error = -EIO; - } - spin_unlock_bh(&sc->sc_resetlock); return error; } @@ -911,7 +886,7 @@ int ath_suspend(struct ath_softc *sc) struct ath_hal *ah = sc->sc_ah; /* No I/O if device has been surprise removed */ - if (sc->sc_invalid) + if (sc->sc_flags & SC_OP_INVALID) return -EIO; /* Shut off the interrupt before setting sc->sc_invalid to '1' */ @@ -919,7 +894,7 @@ int ath_suspend(struct ath_softc *sc) /* XXX: we must make sure h/w will not generate any interrupt * before setting the invalid flag. */ - sc->sc_invalid = 1; + sc->sc_flags |= SC_OP_INVALID; /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); @@ -940,7 +915,7 @@ irqreturn_t ath_isr(int irq, void *dev) bool sched = false; do { - if (sc->sc_invalid) { + if (sc->sc_flags & SC_OP_INVALID) { /* * The hardware is not ready/present, don't * touch anything. Note this can happen early @@ -1050,7 +1025,7 @@ static void ath9k_tasklet(unsigned long data) if (status & ATH9K_INT_FATAL) { /* need a chip reset */ - ath_internal_reset(sc); + ath_reset(sc, false); return; } else { @@ -1093,10 +1068,9 @@ int ath_init(u16 devid, struct ath_softc *sc) int status; int error = 0, i; int csz = 0; - u32 rd; /* XXX: hardware will not be ready until ath_open() being called */ - sc->sc_invalid = 1; + sc->sc_flags |= SC_OP_INVALID; sc->sc_debug = DBG_DEFAULT; DPRINTF(sc, ATH_DBG_CONFIG, "%s: devid 0x%x\n", __func__, devid); @@ -1126,8 +1100,9 @@ int ath_init(u16 devid, struct ath_softc *sc) } sc->sc_ah = ah; - /* Get the chipset-specific aggr limit. */ - sc->sc_rtsaggrlimit = ah->ah_caps.rts_aggr_limit; + /* Initializes the noise floor to a reasonable default value. + * Later on this will be updated during ANI processing. */ + sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; /* Get the hardware key cache size. */ sc->sc_keymax = ah->ah_caps.keycache_size; @@ -1162,14 +1137,12 @@ int ath_init(u16 devid, struct ath_softc *sc) * is resposible for filtering this list based on settings * like the phy mode. */ - rd = ah->ah_currentRD; - error = ath_setup_channels(sc); if (error) goto bad; /* default to STA mode */ - sc->sc_opmode = ATH9K_M_MONITOR; + sc->sc_ah->ah_opmode = ATH9K_M_MONITOR; /* Setup rate tables */ @@ -1238,9 +1211,11 @@ int ath_init(u16 devid, struct ath_softc *sc) goto bad2; } + setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); + sc->sc_rc = ath_rate_attach(ah); if (sc->sc_rc == NULL) { - error = EIO; + error = -EIO; goto bad2; } @@ -1280,20 +1255,13 @@ int ath_init(u16 devid, struct ath_softc *sc) /* 11n Capabilities */ if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { - sc->sc_txaggr = 1; - sc->sc_rxaggr = 1; + sc->sc_flags |= SC_OP_TXAGGR; + sc->sc_flags |= SC_OP_RXAGGR; } sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; - /* Configuration for rx chain detection */ - sc->sc_rxchaindetect_ref = 0; - sc->sc_rxchaindetect_thresh5GHz = 35; - sc->sc_rxchaindetect_thresh2GHz = 35; - sc->sc_rxchaindetect_delta5GHz = 30; - sc->sc_rxchaindetect_delta2GHz = 30; - ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); sc->sc_defant = ath9k_hw_getdefantenna(ah); @@ -1336,8 +1304,10 @@ void ath_deinit(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__); + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); ath_stop(sc); - if (!sc->sc_invalid) + if (!(sc->sc_flags & SC_OP_INVALID)) ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); ath_rate_detach(sc->sc_rc); /* cleanup tx queues */ @@ -1364,7 +1334,7 @@ struct ath_node *ath_node_attach(struct ath_softc *sc, u8 *addr, int if_id) an = kmalloc(sizeof(struct ath_node), GFP_ATOMIC); if (an == NULL) return NULL; - memzero(an, sizeof(*an)); + memset(an, 0, sizeof(*an)); an->an_sc = sc; memcpy(an->an_addr, addr, ETH_ALEN); @@ -1464,9 +1434,9 @@ void ath_newassoc(struct ath_softc *sc, /* if station reassociates, tear down the aggregation state. */ if (!isnew) { for (tidno = 0; tidno < WME_NUM_TID; tidno++) { - if (sc->sc_txaggr) + if (sc->sc_flags & SC_OP_TXAGGR) ath_tx_aggr_teardown(sc, an, tidno); - if (sc->sc_rxaggr) + if (sc->sc_flags & SC_OP_RXAGGR) ath_rx_aggr_teardown(sc, an, tidno); } } @@ -1751,7 +1721,7 @@ int ath_descdma_setup(struct ath_softc *sc, error = -ENOMEM; goto fail2; } - memzero(bf, bsize); + memset(bf, 0, bsize); dd->dd_bufptr = bf; INIT_LIST_HEAD(head); @@ -1783,7 +1753,7 @@ fail2: pci_free_consistent(sc->pdev, dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); fail: - memzero(dd, sizeof(*dd)); + memset(dd, 0, sizeof(*dd)); return error; #undef ATH_DESC_4KB_BOUND_CHECK #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED @@ -1808,20 +1778,13 @@ void ath_descdma_cleanup(struct ath_softc *sc, INIT_LIST_HEAD(head); kfree(dd->dd_bufptr); - memzero(dd, sizeof(*dd)); + memset(dd, 0, sizeof(*dd)); } /*************/ /* Utilities */ /*************/ -void ath_internal_reset(struct ath_softc *sc) -{ - ath_reset_start(sc, 0); - ath_reset(sc); - ath_reset_end(sc, 0); -} - int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) { int qnum; diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 4ee695b76b8..cb3e61e57c4 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -39,6 +39,8 @@ #include <linux/scatterlist.h> #include <asm/page.h> #include <net/mac80211.h> +#include <linux/leds.h> +#include <linux/rfkill.h> #include "ath9k.h" #include "rc.h" @@ -79,11 +81,8 @@ struct ath_node; } \ } while (0) -/* XXX: remove */ -#define memzero(_buf, _len) memset(_buf, 0, _len) - -#define get_dma_mem_context(var, field) (&((var)->field)) -#define copy_dma_mem_context(dst, src) (*dst = *src) +#define TSF_TO_TU(_h,_l) \ + ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) #define ATH9K_BH_STATUS_INTACT 0 #define ATH9K_BH_STATUS_CHANGE 1 @@ -95,6 +94,8 @@ static inline unsigned long get_timestamp(void) return ((jiffies / HZ) * 1000) + (jiffies % HZ) * (1000 / HZ); } +static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + /*************/ /* Debugging */ /*************/ @@ -175,42 +176,38 @@ void ath_update_chainmask(struct ath_softc *sc, int is_ht); /* Descriptor Management */ /*************************/ -/* Number of descriptors per buffer. The only case where we see skbuff -chains is due to FF aggregation in the driver. */ -#define ATH_TXDESC 1 -/* if there's more fragment for this MSDU */ -#define ATH_BF_MORE_MPDU 1 #define ATH_TXBUF_RESET(_bf) do { \ (_bf)->bf_status = 0; \ (_bf)->bf_lastbf = NULL; \ (_bf)->bf_lastfrm = NULL; \ (_bf)->bf_next = NULL; \ - memzero(&((_bf)->bf_state), \ + memset(&((_bf)->bf_state), 0, \ sizeof(struct ath_buf_state)); \ } while (0) +enum buffer_type { + BUF_DATA = BIT(0), + BUF_AGGR = BIT(1), + BUF_AMPDU = BIT(2), + BUF_HT = BIT(3), + BUF_RETRY = BIT(4), + BUF_XRETRY = BIT(5), + BUF_SHORT_PREAMBLE = BIT(6), + BUF_BAR = BIT(7), + BUF_PSPOLL = BIT(8), + BUF_AGGR_BURST = BIT(9), + BUF_CALC_AIRTIME = BIT(10), +}; + struct ath_buf_state { - int bfs_nframes; /* # frames in aggregate */ - u16 bfs_al; /* length of aggregate */ - u16 bfs_frmlen; /* length of frame */ - int bfs_seqno; /* sequence number */ - int bfs_tidno; /* tid of this frame */ - int bfs_retries; /* current retries */ + int bfs_nframes; /* # frames in aggregate */ + u16 bfs_al; /* length of aggregate */ + u16 bfs_frmlen; /* length of frame */ + int bfs_seqno; /* sequence number */ + int bfs_tidno; /* tid of this frame */ + int bfs_retries; /* current retries */ struct ath_rc_series bfs_rcs[4]; /* rate series */ - u8 bfs_isdata:1; /* is a data frame/aggregate */ - u8 bfs_isaggr:1; /* is an aggregate */ - u8 bfs_isampdu:1; /* is an a-mpdu, aggregate or not */ - u8 bfs_ht:1; /* is an HT frame */ - u8 bfs_isretried:1; /* is retried */ - u8 bfs_isxretried:1; /* is excessive retried */ - u8 bfs_shpreamble:1; /* is short preamble */ - u8 bfs_isbar:1; /* is a BAR */ - u8 bfs_ispspoll:1; /* is a PS-Poll */ - u8 bfs_aggrburst:1; /* is a aggr burst */ - u8 bfs_calcairtime:1; /* requests airtime be calculated - when set for tx frame */ - int bfs_rifsburst_elem; /* RIFS burst/bar */ - int bfs_nrifsubframes; /* # of elements in burst */ + u32 bf_type; /* BUF_* (enum buffer_type) */ /* key type use to encrypt this frame */ enum ath9k_key_type bfs_keytype; }; @@ -222,26 +219,22 @@ struct ath_buf_state { #define bf_seqno bf_state.bfs_seqno #define bf_tidno bf_state.bfs_tidno #define bf_rcs bf_state.bfs_rcs -#define bf_isdata bf_state.bfs_isdata -#define bf_isaggr bf_state.bfs_isaggr -#define bf_isampdu bf_state.bfs_isampdu -#define bf_ht bf_state.bfs_ht -#define bf_isretried bf_state.bfs_isretried -#define bf_isxretried bf_state.bfs_isxretried -#define bf_shpreamble bf_state.bfs_shpreamble -#define bf_rifsburst_elem bf_state.bfs_rifsburst_elem -#define bf_nrifsubframes bf_state.bfs_nrifsubframes #define bf_keytype bf_state.bfs_keytype -#define bf_isbar bf_state.bfs_isbar -#define bf_ispspoll bf_state.bfs_ispspoll -#define bf_aggrburst bf_state.bfs_aggrburst -#define bf_calcairtime bf_state.bfs_calcairtime +#define bf_isdata(bf) (bf->bf_state.bf_type & BUF_DATA) +#define bf_isaggr(bf) (bf->bf_state.bf_type & BUF_AGGR) +#define bf_isampdu(bf) (bf->bf_state.bf_type & BUF_AMPDU) +#define bf_isht(bf) (bf->bf_state.bf_type & BUF_HT) +#define bf_isretried(bf) (bf->bf_state.bf_type & BUF_RETRY) +#define bf_isxretried(bf) (bf->bf_state.bf_type & BUF_XRETRY) +#define bf_isshpreamble(bf) (bf->bf_state.bf_type & BUF_SHORT_PREAMBLE) +#define bf_isbar(bf) (bf->bf_state.bf_type & BUF_BAR) +#define bf_ispspoll(bf) (bf->bf_state.bf_type & BUF_PSPOLL) +#define bf_isaggrburst(bf) (bf->bf_state.bf_type & BUF_AGGR_BURST) /* * Abstraction of a contiguous buffer to transmit/receive. There is only * a single hw descriptor encapsulated here. */ - struct ath_buf { struct list_head list; struct list_head *last; @@ -316,7 +309,7 @@ void ath_descdma_cleanup(struct ath_softc *sc, #define ATH_RX_TIMEOUT 40 /* 40 milliseconds */ #define WME_NUM_TID 16 #define IEEE80211_BAR_CTL_TID_M 0xF000 /* tid mask */ -#define IEEE80211_BAR_CTL_TID_S 2 /* tid shift */ +#define IEEE80211_BAR_CTL_TID_S 12 /* tid shift */ enum ATH_RX_TYPE { ATH_RX_NON_CONSUMED = 0, @@ -391,10 +384,10 @@ int ath_rx_input(struct ath_softc *sc, struct sk_buff *skb, struct ath_recv_status *rx_status, enum ATH_RX_TYPE *status); -int ath__rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix); +int _ath_rx_indicate(struct ath_softc *sc, + struct sk_buff *skb, + struct ath_recv_status *status, + u16 keyix); int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb, struct ath_recv_status *status); @@ -402,8 +395,7 @@ int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb, /* TX */ /******/ -#define ATH_FRAG_PER_MSDU 1 -#define ATH_TXBUF (512/ATH_FRAG_PER_MSDU) +#define ATH_TXBUF 512 /* max number of transmit attempts (tries) */ #define ATH_TXMAXTRY 13 /* max number of 11n transmit attempts (tries) */ @@ -522,7 +514,6 @@ struct ath_tx_control { u32 keyix; int min_rate; int mcast_rate; - u16 nextfraglen; struct ath_softc *dev; dma_addr_t dmacontext; }; @@ -557,10 +548,10 @@ void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_setup(struct ath_softc *sc, int haltype); void ath_draintxq(struct ath_softc *sc, bool retry_tx); void ath_tx_draintxq(struct ath_softc *sc, - struct ath_txq *txq, bool retry_tx); + struct ath_txq *txq, bool retry_tx); void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); void ath_tx_node_cleanup(struct ath_softc *sc, - struct ath_node *an, bool bh_flag); + struct ath_node *an, bool bh_flag); void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an); void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_init(struct ath_softc *sc, int nbufs); @@ -575,6 +566,7 @@ u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum); void ath_notify_txq_status(struct ath_softc *sc, u16 queue_depth); void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ath_xmit_status *tx_status, struct ath_node *an); +void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb); /**********************/ /* Node / Aggregation */ @@ -585,7 +577,6 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, /* indicates the node is 80211 power save */ #define ATH_NODE_PWRSAVE 0x2 -#define ADDBA_TIMEOUT 200 /* 200 milliseconds */ #define ADDBA_EXCHANGE_ATTEMPTS 10 #define ATH_AGGR_DELIM_SZ 4 /* delimiter size */ #define ATH_AGGR_MINPLEN 256 /* in bytes, minimum packet length */ @@ -705,9 +696,6 @@ struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr); #define ATH_BCBUF 4 /* number of beacon buffers */ #define ATH_DEFAULT_BINTVAL 100 /* default beacon interval in TU */ #define ATH_DEFAULT_BMISS_LIMIT 10 -#define ATH_BEACON_AIFS_DEFAULT 0 /* Default aifs for ap beacon q */ -#define ATH_BEACON_CWMIN_DEFAULT 0 /* Default cwmin for ap beacon q */ -#define ATH_BEACON_CWMAX_DEFAULT 0 /* Default cwmax for ap beacon q */ #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) /* beacon configuration */ @@ -724,30 +712,16 @@ struct ath_beacon_config { } u; /* last received beacon/probe response timestamp of this BSS. */ }; -/* offsets in a beacon frame for - * quick acess of beacon content by low-level driver */ -struct ath_beacon_offset { - u8 *bo_tim; /* start of atim/dtim */ -}; - void ath9k_beacon_tasklet(unsigned long data); void ath_beacon_config(struct ath_softc *sc, int if_id); int ath_beaconq_setup(struct ath_hal *ah); int ath_beacon_alloc(struct ath_softc *sc, int if_id); void ath_bstuck_process(struct ath_softc *sc); -void ath_beacon_tasklet(struct ath_softc *sc, int *needmark); -void ath_beacon_free(struct ath_softc *sc); void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp); void ath_beacon_sync(struct ath_softc *sc, int if_id); -void ath_update_beacon_info(struct ath_softc *sc, int avgbrssi); void ath_get_beaconconfig(struct ath_softc *sc, int if_id, struct ath_beacon_config *conf); -int ath_update_beacon(struct ath_softc *sc, - int if_id, - struct ath_beacon_offset *bo, - struct sk_buff *skb, - int mcast); /********/ /* VAPs */ /********/ @@ -774,10 +748,8 @@ struct ath_vap { struct ieee80211_vif *av_if_data; enum ath9k_opmode av_opmode; /* VAP operational mode */ struct ath_buf *av_bcbuf; /* beacon buffer */ - struct ath_beacon_offset av_boff; /* dynamic update state */ struct ath_tx_control av_btxctl; /* txctl information for beacon */ int av_bslot; /* beacon slot index */ - struct ath_txq av_mcastq; /* multicast transmit queue */ struct ath_vap_config av_config;/* vap configuration parameters*/ struct ath_rate_node *rc_node; }; @@ -788,8 +760,7 @@ int ath_vap_attach(struct ath_softc *sc, enum ath9k_opmode opmode); int ath_vap_detach(struct ath_softc *sc, int if_id); int ath_vap_config(struct ath_softc *sc, - int if_id, struct ath_vap_config *if_config); -int ath_vap_listen(struct ath_softc *sc, int if_id); + int if_id, struct ath_vap_config *if_config); /*********************/ /* Antenna diversity */ @@ -829,6 +800,58 @@ void ath_slow_ant_div(struct ath_antdiv *antdiv, struct ath_rx_status *rx_stats); void ath_setdefantenna(void *sc, u32 antenna); +/*******/ +/* ANI */ +/*******/ + +/* ANI values for STA only. + FIXME: Add appropriate values for AP later */ + +#define ATH_ANI_POLLINTERVAL 100 /* 100 milliseconds between ANI poll */ +#define ATH_SHORT_CALINTERVAL 1000 /* 1 second between calibrations */ +#define ATH_LONG_CALINTERVAL 30000 /* 30 seconds between calibrations */ +#define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes between calibrations */ + +struct ath_ani { + bool sc_caldone; + int16_t sc_noise_floor; + unsigned int sc_longcal_timer; + unsigned int sc_shortcal_timer; + unsigned int sc_resetcal_timer; + unsigned int sc_checkani_timer; + struct timer_list timer; +}; + +/********************/ +/* LED Control */ +/********************/ + +#define ATH_LED_PIN 1 + +enum ath_led_type { + ATH_LED_RADIO, + ATH_LED_ASSOC, + ATH_LED_TX, + ATH_LED_RX +}; + +struct ath_led { + struct ath_softc *sc; + struct led_classdev led_cdev; + enum ath_led_type led_type; + char name[32]; + bool registered; +}; + +/* Rfkill */ +#define ATH_RFKILL_POLL_INTERVAL 2000 /* msecs */ + +struct ath_rfkill { + struct rfkill *rfkill; + struct delayed_work rfkill_poll; + char rfkill_name[32]; +}; + /********************/ /* Main driver core */ /********************/ @@ -841,11 +864,7 @@ void ath_setdefantenna(void *sc, u32 antenna); #define ATH_DEFAULT_NOISE_FLOOR -95 #define ATH_REGCLASSIDS_MAX 10 #define ATH_CABQ_READY_TIME 80 /* % of beacon interval */ -#define ATH_PREAMBLE_SHORT (1<<0) -#define ATH_PROTECT_ENABLE (1<<1) #define ATH_MAX_SW_RETRIES 10 -/* Num farmes difference in tx to flip default recv */ -#define ATH_ANTENNA_DIFF 2 #define ATH_CHAN_MAX 255 #define IEEE80211_WEP_NKID 4 /* number of key ids */ #define IEEE80211_RATE_VAL 0x7f @@ -859,9 +878,7 @@ void ath_setdefantenna(void *sc, u32 antenna); */ #define ATH_KEYMAX 128 /* max key cache size we handle */ -#define RESET_RETRY_TXQ 0x00000001 #define ATH_IF_ID_ANY 0xff - #define ATH_TXPOWER_MAX 100 /* .5 dBm units */ #define RSSI_LPF_THRESHOLD -20 @@ -907,60 +924,64 @@ struct ath_ht_info { u8 ext_chan_offset; }; +#define SC_OP_INVALID BIT(0) +#define SC_OP_BEACONS BIT(1) +#define SC_OP_RXAGGR BIT(2) +#define SC_OP_TXAGGR BIT(3) +#define SC_OP_CHAINMASK_UPDATE BIT(4) +#define SC_OP_FULL_RESET BIT(5) +#define SC_OP_NO_RESET BIT(6) +#define SC_OP_PREAMBLE_SHORT BIT(7) +#define SC_OP_PROTECT_ENABLE BIT(8) +#define SC_OP_RXFLUSH BIT(9) +#define SC_OP_LED_ASSOCIATED BIT(10) +#define SC_OP_RFKILL_REGISTERED BIT(11) +#define SC_OP_RFKILL_SW_BLOCKED BIT(12) +#define SC_OP_RFKILL_HW_BLOCKED BIT(13) + struct ath_softc { struct ieee80211_hw *hw; struct pci_dev *pdev; - void __iomem *mem; struct tasklet_struct intr_tq; struct tasklet_struct bcon_tasklet; - struct ath_config sc_config; /* load-time parameters */ - int sc_debug; + struct ath_config sc_config; struct ath_hal *sc_ah; - struct ath_rate_softc *sc_rc; /* tx rate control support */ + struct ath_rate_softc *sc_rc; + void __iomem *mem; + + u8 sc_curbssid[ETH_ALEN]; + u8 sc_myaddr[ETH_ALEN]; + u8 sc_bssidmask[ETH_ALEN]; + + int sc_debug; u32 sc_intrstatus; - enum ath9k_opmode sc_opmode; /* current operating mode */ - - u8 sc_invalid; /* being detached */ - u8 sc_beacons; /* beacons running */ - u8 sc_scanning; /* scanning active */ - u8 sc_txaggr; /* enable 11n tx aggregation */ - u8 sc_rxaggr; /* enable 11n rx aggregation */ - u8 sc_update_chainmask; /* change chain mask */ - u8 sc_full_reset; /* force full reset */ - enum wireless_mode sc_curmode; /* current phy mode */ + u32 sc_flags; /* SC_OP_* */ + unsigned int rx_filter; u16 sc_curtxpow; u16 sc_curaid; - u8 sc_curbssid[ETH_ALEN]; - u8 sc_myaddr[ETH_ALEN]; + u16 sc_cachelsz; + int sc_slotupdate; /* slot to next advance fsm */ + int sc_slottime; + int sc_bslot[ATH_BCBUF]; + u8 sc_tx_chainmask; + u8 sc_rx_chainmask; + enum ath9k_int sc_imask; + enum wireless_mode sc_curmode; /* current phy mode */ enum PROT_MODE sc_protmode; - u8 sc_mcastantenna; - u8 sc_txantenna; /* data tx antenna (fixed or auto) */ + u8 sc_nbcnvaps; /* # of vaps sending beacons */ u16 sc_nvaps; /* # of active virtual ap's */ struct ath_vap *sc_vaps[ATH_BCBUF]; - enum ath9k_int sc_imask; - u8 sc_bssidmask[ETH_ALEN]; + + u8 sc_mcastantenna; u8 sc_defant; /* current default antenna */ u8 sc_rxotherant; /* rx's on non-default antenna */ - u16 sc_cachelsz; - int sc_slotupdate; /* slot to next advance fsm */ - int sc_slottime; - u8 sc_noreset; - int sc_bslot[ATH_BCBUF]; + struct ath9k_node_stats sc_halstats; /* station-mode rssi stats */ struct list_head node_list; struct ath_ht_info sc_ht_info; - int16_t sc_noise_floor; /* signal noise floor in dBm */ enum ath9k_ht_extprotspacing sc_ht_extprotspacing; - u8 sc_tx_chainmask; - u8 sc_rx_chainmask; - u8 sc_rxchaindetect_ref; - u8 sc_rxchaindetect_thresh5GHz; - u8 sc_rxchaindetect_thresh2GHz; - u8 sc_rxchaindetect_delta5GHz; - u8 sc_rxchaindetect_delta2GHz; - u32 sc_rtsaggrlimit; /* Chipset specific aggr limit */ - u32 sc_flags; + #ifdef CONFIG_SLOW_ANT_DIV struct ath_antdiv sc_antdiv; #endif @@ -974,15 +995,12 @@ struct ath_softc { u32 sc_keymax; /* size of key cache */ DECLARE_BITMAP(sc_keymap, ATH_KEYMAX); /* key use bit map */ u8 sc_splitmic; /* split TKIP MIC keys */ - int sc_keytype; /* RX */ struct list_head sc_rxbuf; struct ath_descdma sc_rxdma; int sc_rxbufsize; /* rx size based on mtu */ u32 *sc_rxlink; /* link ptr in last RX desc */ - u32 sc_rxflush; /* rx flush in progress */ - u64 sc_lastrx; /* tsf of last rx'd frame */ /* TX */ struct list_head sc_txbuf; @@ -991,7 +1009,6 @@ struct ath_softc { u32 sc_txqsetup; u32 sc_txintrperiod; /* tx interrupt batching */ int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */ - u32 sc_ant_tx[8]; /* recent tx frames/antenna */ u16 seq_no; /* TX sequence number */ /* Beacon */ @@ -1002,6 +1019,7 @@ struct ath_softc { u32 sc_bhalq; u32 sc_bmisscount; u32 ast_be_xmit; /* beacons transmitted */ + u64 bc_tstamp; /* Rate */ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX]; @@ -1016,7 +1034,6 @@ struct ath_softc { /* Channel, Band */ struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX]; struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; - struct ath9k_channel sc_curchan; /* Locks */ spinlock_t sc_rxflushlock; @@ -1024,6 +1041,18 @@ struct ath_softc { spinlock_t sc_txbuflock; spinlock_t sc_resetlock; spinlock_t node_lock; + + /* LEDs */ + struct ath_led radio_led; + struct ath_led assoc_led; + struct ath_led tx_led; + struct ath_led rx_led; + + /* Rfkill */ + struct ath_rfkill rf_kill; + + /* ANI */ + struct ath_ani sc_ani; }; int ath_init(u16 devid, struct ath_softc *sc); @@ -1031,14 +1060,8 @@ void ath_deinit(struct ath_softc *sc); int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan); int ath_suspend(struct ath_softc *sc); irqreturn_t ath_isr(int irq, void *dev); -int ath_reset(struct ath_softc *sc); -void ath_scan_start(struct ath_softc *sc); -void ath_scan_end(struct ath_softc *sc); +int ath_reset(struct ath_softc *sc, bool retry_tx); int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan); -void ath_setup_rate(struct ath_softc *sc, - enum wireless_mode wMode, - enum RATE_TYPE type, - const struct ath9k_rate_table *rt); /*********************/ /* Utility Functions */ @@ -1057,17 +1080,5 @@ int ath_cabq_update(struct ath_softc *); void ath_get_currentCountry(struct ath_softc *sc, struct ath9k_country_entry *ctry); u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp); -void ath_internal_reset(struct ath_softc *sc); -u32 ath_chan2flags(struct ieee80211_channel *chan, struct ath_softc *sc); -dma_addr_t ath_skb_map_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa); -void ath_skb_unmap_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa); -void ath_mcast_merge(struct ath_softc *sc, u32 mfilt[2]); -enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc); #endif /* CORE_H */ diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index 6dbfed0b414..98bc25c9b3c 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -85,29 +85,6 @@ static const struct hal_percal_data adc_init_dc_cal = { ath9k_hw_adc_dccal_calibrate }; -static const struct ath_hal ar5416hal = { - AR5416_MAGIC, - 0, - 0, - NULL, - NULL, - CTRY_DEFAULT, - 0, - 0, - 0, - 0, - 0, - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - }, -}; - static struct ath9k_rate_table ar5416_11a_table = { 8, {0}, @@ -352,7 +329,7 @@ static void ath9k_hw_set_defaults(struct ath_hal *ah) ah->ah_config.ofdm_trig_high = 500; ah->ah_config.cck_trig_high = 200; ah->ah_config.cck_trig_low = 100; - ah->ah_config.enable_ani = 0; + ah->ah_config.enable_ani = 1; ah->ah_config.noise_immunity_level = 4; ah->ah_config.ofdm_weaksignal_det = 1; ah->ah_config.cck_weaksignal_thr = 0; @@ -371,7 +348,7 @@ static void ath9k_hw_set_defaults(struct ath_hal *ah) ah->ah_config.intr_mitigation = 0; } -static inline void ath9k_hw_override_ini(struct ath_hal *ah, +static void ath9k_hw_override_ini(struct ath_hal *ah, struct ath9k_channel *chan) { if (!AR_SREV_5416_V20_OR_LATER(ah) @@ -381,8 +358,8 @@ static inline void ath9k_hw_override_ini(struct ath_hal *ah, REG_WRITE(ah, 0x9800 + (651 << 2), 0x11); } -static inline void ath9k_hw_init_bb(struct ath_hal *ah, - struct ath9k_channel *chan) +static void ath9k_hw_init_bb(struct ath_hal *ah, + struct ath9k_channel *chan) { u32 synthDelay; @@ -397,8 +374,8 @@ static inline void ath9k_hw_init_bb(struct ath_hal *ah, udelay(synthDelay + BASE_ACTIVATE_DELAY); } -static inline void ath9k_hw_init_interrupt_masks(struct ath_hal *ah, - enum ath9k_opmode opmode) +static void ath9k_hw_init_interrupt_masks(struct ath_hal *ah, + enum ath9k_opmode opmode) { struct ath_hal_5416 *ahp = AH5416(ah); @@ -428,7 +405,7 @@ static inline void ath9k_hw_init_interrupt_masks(struct ath_hal *ah, } } -static inline void ath9k_hw_init_qos(struct ath_hal *ah) +static void ath9k_hw_init_qos(struct ath_hal *ah) { REG_WRITE(ah, AR_MIC_QOS_CONTROL, 0x100aa); REG_WRITE(ah, AR_MIC_QOS_SELECT, 0x3210); @@ -523,7 +500,7 @@ static inline bool ath9k_hw_nvram_read(struct ath_hal *ah, return ath9k_hw_eeprom_read(ah, off, data); } -static inline bool ath9k_hw_fill_eeprom(struct ath_hal *ah) +static bool ath9k_hw_fill_eeprom(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); struct ar5416_eeprom *eep = &ahp->ah_eeprom; @@ -790,7 +767,7 @@ ath9k_hw_eeprom_set_board_values(struct ath_hal *ah, return true; } -static inline int ath9k_hw_check_eeprom(struct ath_hal *ah) +static int ath9k_hw_check_eeprom(struct ath_hal *ah) { u32 sum = 0, el; u16 *eepdata; @@ -1196,11 +1173,12 @@ static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid, ah = &ahp->ah; - memcpy(&ahp->ah, &ar5416hal, sizeof(struct ath_hal)); - ah->ah_sc = sc; ah->ah_sh = mem; + ah->ah_magic = AR5416_MAGIC; + ah->ah_countryCode = CTRY_DEFAULT; + ah->ah_devid = devid; ah->ah_subvendorid = 0; @@ -1294,7 +1272,7 @@ u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp, } } -static inline int ath9k_hw_get_radiorev(struct ath_hal *ah) +static int ath9k_hw_get_radiorev(struct ath_hal *ah) { u32 val; int i; @@ -1307,7 +1285,7 @@ static inline int ath9k_hw_get_radiorev(struct ath_hal *ah) return ath9k_hw_reverse_bits(val, 8); } -static inline int ath9k_hw_init_macaddr(struct ath_hal *ah) +static int ath9k_hw_init_macaddr(struct ath_hal *ah) { u32 sum; int i; @@ -1389,7 +1367,7 @@ static u16 ath9k_hw_eeprom_get_spur_chan(struct ath_hal *ah, return spur_val; } -static inline int ath9k_hw_rfattach(struct ath_hal *ah) +static int ath9k_hw_rfattach(struct ath_hal *ah) { bool rfStatus = false; int ecode = 0; @@ -1434,8 +1412,8 @@ static int ath9k_hw_rf_claim(struct ath_hal *ah) return 0; } -static inline void ath9k_hw_init_pll(struct ath_hal *ah, - struct ath9k_channel *chan) +static void ath9k_hw_init_pll(struct ath_hal *ah, + struct ath9k_channel *chan) { u32 pll; @@ -1553,7 +1531,7 @@ static void ath9k_hw_set_operating_mode(struct ath_hal *ah, int opmode) } } -static inline void +static void ath9k_hw_set_rfmode(struct ath_hal *ah, struct ath9k_channel *chan) { u32 rfMode = 0; @@ -1623,7 +1601,7 @@ static bool ath9k_hw_set_reset(struct ath_hal *ah, int type) return true; } -static inline bool ath9k_hw_set_reset_power_on(struct ath_hal *ah) +static bool ath9k_hw_set_reset_power_on(struct ath_hal *ah) { REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); @@ -1664,7 +1642,7 @@ static bool ath9k_hw_set_reset_reg(struct ath_hal *ah, } } -static inline +static struct ath9k_channel *ath9k_hw_check_chan(struct ath_hal *ah, struct ath9k_channel *chan) { @@ -2098,7 +2076,7 @@ static void ath9k_hw_ani_attach(struct ath_hal *ah) ahp->ah_procPhyErr |= HAL_PROCESS_ANI; } -static inline void ath9k_hw_ani_setup(struct ath_hal *ah) +static void ath9k_hw_ani_setup(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); int i; @@ -2548,6 +2526,11 @@ static void ath9k_ani_reset(struct ath_hal *ah) } } +/* + * Process a MIB interrupt. We may potentially be invoked because + * any of the MIB counters overflow/trigger so don't assume we're + * here because a PHY error counter triggered. + */ void ath9k_hw_procmibevent(struct ath_hal *ah, const struct ath9k_node_stats *stats) { @@ -2555,18 +2538,20 @@ void ath9k_hw_procmibevent(struct ath_hal *ah, u32 phyCnt1, phyCnt2; DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Processing Mib Intr\n"); - + /* Reset these counters regardless */ REG_WRITE(ah, AR_FILT_OFDM, 0); REG_WRITE(ah, AR_FILT_CCK, 0); if (!(REG_READ(ah, AR_SLP_MIB_CTRL) & AR_SLP_MIB_PENDING)) REG_WRITE(ah, AR_SLP_MIB_CTRL, AR_SLP_MIB_CLEAR); + /* Clear the mib counters and save them in the stats */ ath9k_hw_update_mibstats(ah, &ahp->ah_mibStats); ahp->ah_stats.ast_nodestats = *stats; if (!DO_ANI(ah)) return; + /* NB: these are not reset-on-read */ phyCnt1 = REG_READ(ah, AR_PHY_ERR_1); phyCnt2 = REG_READ(ah, AR_PHY_ERR_2); if (((phyCnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) || @@ -2574,6 +2559,7 @@ void ath9k_hw_procmibevent(struct ath_hal *ah, struct ar5416AniState *aniState = ahp->ah_curani; u32 ofdmPhyErrCnt, cckPhyErrCnt; + /* NB: only use ast_ani_*errs with AH_PRIVATE_DIAG */ ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase; ahp->ah_stats.ast_ani_ofdmerrs += ofdmPhyErrCnt - aniState->ofdmPhyErrCount; @@ -2584,11 +2570,17 @@ void ath9k_hw_procmibevent(struct ath_hal *ah, cckPhyErrCnt - aniState->cckPhyErrCount; aniState->cckPhyErrCount = cckPhyErrCnt; + /* + * NB: figure out which counter triggered. If both + * trigger we'll only deal with one as the processing + * clobbers the error counter so the trigger threshold + * check will never be true. + */ if (aniState->ofdmPhyErrCount > aniState->ofdmTrigHigh) ath9k_hw_ani_ofdm_err_trigger(ah); if (aniState->cckPhyErrCount > aniState->cckTrigHigh) ath9k_hw_ani_cck_err_trigger(ah); - + /* NB: always restart to insure the h/w counters are reset */ ath9k_ani_restart(ah); } } @@ -2822,32 +2814,11 @@ static void ath9k_hw_gpio_cfg_output_mux(struct ath_hal *ah, } } -static bool ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, - enum ath9k_gpio_output_mux_type - halSignalType) +void ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, + u32 ah_signal_type) { - u32 ah_signal_type; u32 gpio_shift; - static u32 MuxSignalConversionTable[] = { - - AR_GPIO_OUTPUT_MUX_AS_OUTPUT, - - AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED, - - AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED, - - AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED, - - AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED, - }; - - if ((halSignalType >= 0) - && (halSignalType < ARRAY_SIZE(MuxSignalConversionTable))) - ah_signal_type = MuxSignalConversionTable[halSignalType]; - else - return false; - ath9k_hw_gpio_cfg_output_mux(ah, gpio, ah_signal_type); gpio_shift = 2 * gpio; @@ -2856,19 +2827,46 @@ static bool ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, AR_GPIO_OE_OUT, (AR_GPIO_OE_OUT_DRV_ALL << gpio_shift), (AR_GPIO_OE_OUT_DRV << gpio_shift)); - - return true; } -static bool ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, - u32 val) +void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val) { REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio), AR_GPIO_BIT(gpio)); - return true; } -static u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio) +/* + * Configure GPIO Input lines + */ +void ath9k_hw_cfg_gpio_input(struct ath_hal *ah, u32 gpio) +{ + u32 gpio_shift; + + ASSERT(gpio < ah->ah_caps.num_gpio_pins); + + gpio_shift = gpio << 1; + + REG_RMW(ah, + AR_GPIO_OE_OUT, + (AR_GPIO_OE_OUT_DRV_NO << gpio_shift), + (AR_GPIO_OE_OUT_DRV << gpio_shift)); +} + +#ifdef CONFIG_RFKILL +static void ath9k_enable_rfkill(struct ath_hal *ah) +{ + REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, + AR_GPIO_INPUT_EN_VAL_RFSILENT_BB); + + REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2, + AR_GPIO_INPUT_MUX2_RFSILENT); + + ath9k_hw_cfg_gpio_input(ah, ah->ah_rfkill_gpio); + REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB); +} +#endif + +u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio) { if (gpio >= ah->ah_caps.num_gpio_pins) return 0xffffffff; @@ -2883,7 +2881,7 @@ static u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio) } } -static inline int ath9k_hw_post_attach(struct ath_hal *ah) +static int ath9k_hw_post_attach(struct ath_hal *ah) { int ecode; @@ -3081,17 +3079,17 @@ static bool ath9k_hw_fill_cap_info(struct ath_hal *ah) pCap->hw_caps |= ATH9K_HW_CAP_ENHANCEDPM; +#ifdef CONFIG_RFKILL ah->ah_rfsilent = ath9k_hw_get_eeprom(ahp, EEP_RF_SILENT); if (ah->ah_rfsilent & EEP_RFSILENT_ENABLED) { - ahp->ah_gpioSelect = + ah->ah_rfkill_gpio = MS(ah->ah_rfsilent, EEP_RFSILENT_GPIO_SEL); - ahp->ah_polarity = + ah->ah_rfkill_polarity = MS(ah->ah_rfsilent, EEP_RFSILENT_POLARITY); - ath9k_hw_setcapability(ah, ATH9K_CAP_RFSILENT, 1, true, - NULL); pCap->hw_caps |= ATH9K_HW_CAP_RFSILENT; } +#endif if ((ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) || (ah->ah_macVersion == AR_SREV_VERSION_5416_PCIE) || @@ -3595,7 +3593,7 @@ static inline bool ath9k_hw_fill_vpd_table(u8 pwrMin, return true; } -static inline void +static void ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hal *ah, struct ath9k_channel *chan, struct cal_data_per_freq *pRawDataSet, @@ -3777,7 +3775,7 @@ ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hal *ah, return; } -static inline bool +static bool ath9k_hw_set_power_cal_table(struct ath_hal *ah, struct ar5416_eeprom *pEepData, struct ath9k_channel *chan, @@ -3980,7 +3978,7 @@ void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore) } } -static inline void +static void ath9k_hw_get_legacy_target_powers(struct ath_hal *ah, struct ath9k_channel *chan, struct cal_target_power_leg *powInfo, @@ -4046,7 +4044,7 @@ ath9k_hw_get_legacy_target_powers(struct ath_hal *ah, } } -static inline void +static void ath9k_hw_get_target_powers(struct ath_hal *ah, struct ath9k_channel *chan, struct cal_target_power_ht *powInfo, @@ -4113,7 +4111,7 @@ ath9k_hw_get_target_powers(struct ath_hal *ah, } } -static inline u16 +static u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower, bool is2GHz) @@ -4143,7 +4141,7 @@ ath9k_hw_get_max_edge_power(u16 freq, return twiceMaxEdgePower; } -static inline bool +static bool ath9k_hw_set_power_per_rate_table(struct ath_hal *ah, struct ar5416_eeprom *pEepData, struct ath9k_channel *chan, @@ -5122,7 +5120,7 @@ static void ath9k_hw_spur_mitigate(struct ath_hal *ah, REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } -static inline void ath9k_hw_init_chain_masks(struct ath_hal *ah) +static void ath9k_hw_init_chain_masks(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); int rx_chainmask, tx_chainmask; @@ -5326,7 +5324,7 @@ bool ath9k_hw_setslottime(struct ath_hal *ah, u32 us) } } -static inline void ath9k_hw_init_user_settings(struct ath_hal *ah) +static void ath9k_hw_init_user_settings(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); @@ -5345,7 +5343,7 @@ static inline void ath9k_hw_init_user_settings(struct ath_hal *ah) ath9k_hw_set_global_txtimeout(ah, ahp->ah_globaltxtimeout); } -static inline int +static int ath9k_hw_process_ini(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode) @@ -5476,7 +5474,7 @@ ath9k_hw_process_ini(struct ath_hal *ah, return 0; } -static inline void ath9k_hw_setup_calibration(struct ath_hal *ah, +static void ath9k_hw_setup_calibration(struct ath_hal *ah, struct hal_cal_list *currCal) { REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0), @@ -5512,8 +5510,8 @@ static inline void ath9k_hw_setup_calibration(struct ath_hal *ah, AR_PHY_TIMING_CTRL4_DO_CAL); } -static inline void ath9k_hw_reset_calibration(struct ath_hal *ah, - struct hal_cal_list *currCal) +static void ath9k_hw_reset_calibration(struct ath_hal *ah, + struct hal_cal_list *currCal) { struct ath_hal_5416 *ahp = AH5416(ah); int i; @@ -5532,7 +5530,7 @@ static inline void ath9k_hw_reset_calibration(struct ath_hal *ah, ahp->ah_CalSamples = 0; } -static inline void +static void ath9k_hw_per_calibration(struct ath_hal *ah, struct ath9k_channel *ichan, u8 rxchainmask, @@ -5622,7 +5620,7 @@ static inline bool ath9k_hw_run_init_cals(struct ath_hal *ah, return true; } -static inline bool +static bool ath9k_hw_channel_change(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode) @@ -5799,8 +5797,8 @@ static bool ath9k_hw_iscal_supported(struct ath_hal *ah, return retval; } -static inline bool ath9k_hw_init_cal(struct ath_hal *ah, - struct ath9k_channel *chan) +static bool ath9k_hw_init_cal(struct ath_hal *ah, + struct ath9k_channel *chan) { struct ath_hal_5416 *ahp = AH5416(ah); struct ath9k_channel *ichan = @@ -5861,7 +5859,7 @@ static inline bool ath9k_hw_init_cal(struct ath_hal *ah, } -bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, +bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode, u8 txchainmask, u8 rxchainmask, @@ -5869,7 +5867,6 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, bool bChannelChange, int *status) { -#define FAIL(_code) do { ecode = _code; goto bad; } while (0) u32 saveLedState; struct ath_hal_5416 *ahp = AH5416(ah); struct ath9k_channel *curchan = ah->ah_curchan; @@ -5891,11 +5888,14 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, "%s: invalid channel %u/0x%x; no mapping\n", __func__, chan->channel, chan->channelFlags); - FAIL(-EINVAL); + ecode = -EINVAL; + goto bad; } - if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) - return false; + if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) { + ecode = -EIO; + goto bad; + } if (curchan) ath9k_hw_getnf(ah, curchan); @@ -5932,7 +5932,8 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, if (!ath9k_hw_chip_reset(ah, chan)) { DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s: chip reset failed\n", __func__); - FAIL(-EIO); + ecode = -EINVAL; + goto bad; } if (AR_SREV_9280(ah)) { @@ -5945,12 +5946,14 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, else ath9k_hw_set_gpio(ah, 9, 1); } - ath9k_hw_cfg_output(ah, 9, ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_cfg_output(ah, 9, AR_GPIO_OUTPUT_MUX_AS_OUTPUT); } ecode = ath9k_hw_process_ini(ah, chan, macmode); - if (ecode != 0) + if (ecode != 0) { + ecode = -EINVAL; goto bad; + } if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) ath9k_hw_set_delta_slope(ah, chan); @@ -5963,7 +5966,8 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, if (!ath9k_hw_eeprom_set_board_values(ah, chan)) { DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "%s: error setting board options\n", __func__); - FAIL(-EIO); + ecode = -EIO; + goto bad; } ath9k_hw_decrease_chain_power(ah, chan); @@ -5975,7 +5979,7 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, | (ah->ah_config. ack_6mb ? AR_STA_ID1_ACKCTS_6MB : 0) | ahp->ah_staId1Defaults); - ath9k_hw_set_operating_mode(ah, opmode); + ath9k_hw_set_operating_mode(ah, ah->ah_opmode); REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(ahp->ah_bssidmask)); REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(ahp->ah_bssidmask + 4)); @@ -5991,11 +5995,15 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR); if (AR_SREV_9280_10_OR_LATER(ah)) { - if (!(ath9k_hw_ar9280_set_channel(ah, chan))) - FAIL(-EIO); + if (!(ath9k_hw_ar9280_set_channel(ah, chan))) { + ecode = -EIO; + goto bad; + } } else { - if (!(ath9k_hw_set_channel(ah, chan))) - FAIL(-EIO); + if (!(ath9k_hw_set_channel(ah, chan))) { + ecode = -EIO; + goto bad; + } } for (i = 0; i < AR_NUM_DCU; i++) @@ -6005,13 +6013,15 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, for (i = 0; i < ah->ah_caps.total_queues; i++) ath9k_hw_resettxqueue(ah, i); - ath9k_hw_init_interrupt_masks(ah, opmode); + ath9k_hw_init_interrupt_masks(ah, ah->ah_opmode); ath9k_hw_init_qos(ah); +#ifdef CONFIG_RFKILL + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + ath9k_enable_rfkill(ah); +#endif ath9k_hw_init_user_settings(ah); - ah->ah_opmode = opmode; - REG_WRITE(ah, AR_STA_ID1, REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM); @@ -6027,8 +6037,10 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, ath9k_hw_init_bb(ah, chan); - if (!ath9k_hw_init_cal(ah, chan)) - FAIL(-ENODEV); + if (!ath9k_hw_init_cal(ah, chan)){ + ecode = -EIO;; + goto bad; + } rx_chainmask = ahp->ah_rxchainmask; if ((rx_chainmask == 0x5) || (rx_chainmask == 0x3)) { @@ -6064,7 +6076,6 @@ bad: if (status) *status = ecode; return false; -#undef FAIL } bool ath9k_hw_phy_disable(struct ath_hal *ah) @@ -6539,31 +6550,6 @@ ath9k_hw_setbssidmask(struct ath_hal *ah, const u8 *mask) return true; } -#ifdef CONFIG_ATH9K_RFKILL -static void ath9k_enable_rfkill(struct ath_hal *ah) -{ - struct ath_hal_5416 *ahp = AH5416(ah); - - REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, - AR_GPIO_INPUT_EN_VAL_RFSILENT_BB); - - REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2, - AR_GPIO_INPUT_MUX2_RFSILENT); - - ath9k_hw_cfg_gpio_input(ah, ahp->ah_gpioSelect); - REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB); - - if (ahp->ah_gpioBit == ath9k_hw_gpio_get(ah, ahp->ah_gpioSelect)) { - - ath9k_hw_set_gpio_intr(ah, ahp->ah_gpioSelect, - !ahp->ah_gpioBit); - } else { - ath9k_hw_set_gpio_intr(ah, ahp->ah_gpioSelect, - ahp->ah_gpioBit); - } -} -#endif - void ath9k_hw_write_associd(struct ath_hal *ah, const u8 *bssid, u16 assocId) @@ -7678,8 +7664,7 @@ bool ath9k_hw_resettxqueue(struct ath_hal *ah, u32 q) REG_WRITE(ah, AR_DRETRY_LIMIT(q), SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH) | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG) - | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH) - ); + | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)); REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); REG_WRITE(ah, AR_DMISC(q), @@ -8324,15 +8309,7 @@ struct ath_hal *ath9k_hw_attach(u16 devid, *error = -ENXIO; break; } - if (ah != NULL) { - ah->ah_devid = ah->ah_devid; - ah->ah_subvendorid = ah->ah_subvendorid; - ah->ah_macVersion = ah->ah_macVersion; - ah->ah_macRev = ah->ah_macRev; - ah->ah_phyRev = ah->ah_phyRev; - ah->ah_analog5GhzRev = ah->ah_analog5GhzRev; - ah->ah_analog2GhzRev = ah->ah_analog2GhzRev; - } + return ah; } @@ -8439,23 +8416,48 @@ u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags) } } -int16_t +/* We can tune this as we go by monitoring really low values */ +#define ATH9K_NF_TOO_LOW -60 + +/* AR5416 may return very high value (like -31 dBm), in those cases the nf + * is incorrect and we should use the static NF value. Later we can try to + * find out why they are reporting these values */ +static bool ath9k_hw_nf_in_range(struct ath_hal *ah, s16 nf) +{ + if (nf > ATH9K_NF_TOO_LOW) { + DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL, + "%s: noise floor value detected (%d) is " + "lower than what we think is a " + "reasonable value (%d)\n", + __func__, nf, ATH9K_NF_TOO_LOW); + return false; + } + return true; +} + +s16 ath9k_hw_getchan_noise(struct ath_hal *ah, struct ath9k_channel *chan) { struct ath9k_channel *ichan; + s16 nf; ichan = ath9k_regd_check_channel(ah, chan); if (ichan == NULL) { DPRINTF(ah->ah_sc, ATH_DBG_NF_CAL, "%s: invalid channel %u/0x%x; no mapping\n", __func__, chan->channel, chan->channelFlags); - return 0; + return ATH_DEFAULT_NOISE_FLOOR; } if (ichan->rawNoiseFloor == 0) { enum wireless_mode mode = ath9k_hw_chan2wmode(ah, chan); - return NOISE_FLOOR[mode]; + nf = NOISE_FLOOR[mode]; } else - return ichan->rawNoiseFloor; + nf = ichan->rawNoiseFloor; + + if (!ath9k_hw_nf_in_range(ah, nf)) + nf = ATH_DEFAULT_NOISE_FLOOR; + + return nf; } bool ath9k_hw_set_tsfadjust(struct ath_hal *ah, u32 setting) diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h index ae680f21ba7..2113818ee93 100644 --- a/drivers/net/wireless/ath9k/hw.h +++ b/drivers/net/wireless/ath9k/hw.h @@ -314,14 +314,11 @@ struct ar5416_desc { #define RXSTATUS_RATE(ah, ads) (AR_SREV_5416_V20_OR_LATER(ah) ? \ MS(ads->ds_rxstatus0, AR_RxRate) : \ (ads->ds_rxstatus3 >> 2) & 0xFF) -#define RXSTATUS_DUPLICATE(ah, ads) (AR_SREV_5416_V20_OR_LATER(ah) ? \ - MS(ads->ds_rxstatus3, AR_Parallel40) : \ - (ads->ds_rxstatus3 >> 10) & 0x1) -#define set11nTries(_series, _index) \ +#define set11nTries(_series, _index) \ (SM((_series)[_index].Tries, AR_XmitDataTries##_index)) -#define set11nRate(_series, _index) \ +#define set11nRate(_series, _index) \ (SM((_series)[_index].Rate, AR_XmitRate##_index)) #define set11nPktDurRTSCTS(_series, _index) \ @@ -330,11 +327,11 @@ struct ar5416_desc { AR_RTSCTSQual##_index : 0)) #define set11nRateFlags(_series, _index) \ - (((_series)[_index].RateFlags & ATH9K_RATESERIES_2040 ? \ - AR_2040_##_index : 0) \ - |((_series)[_index].RateFlags & ATH9K_RATESERIES_HALFGI ? \ - AR_GI##_index : 0) \ - |SM((_series)[_index].ChSel, AR_ChainSel##_index)) + (((_series)[_index].RateFlags & ATH9K_RATESERIES_2040 ? \ + AR_2040_##_index : 0) \ + |((_series)[_index].RateFlags & ATH9K_RATESERIES_HALFGI ? \ + AR_GI##_index : 0) \ + |SM((_series)[_index].ChSel, AR_ChainSel##_index)) #define AR_SREV_9100(ah) ((ah->ah_macVersion) == AR_SREV_VERSION_9100) @@ -346,9 +343,6 @@ struct ar5416_desc { #define MAX_TX_FIFO_THRESHOLD ((4096 / 64) - 1) #define INIT_TX_FIFO_THRESHOLD MIN_TX_FIFO_THRESHOLD -#define NUM_CORNER_FIX_BITS_2133 7 -#define CCK_OFDM_GAIN_DELTA 15 - struct ar5416AniState { struct ath9k_channel c; u8 noiseImmunityLevel; @@ -377,11 +371,8 @@ struct ar5416AniState { }; #define HAL_PROCESS_ANI 0x00000001 -#define HAL_RADAR_EN 0x80000000 -#define HAL_AR_EN 0x40000000 - #define DO_ANI(ah) \ - ((AH5416(ah)->ah_procPhyErr & HAL_PROCESS_ANI)) + ((AH5416(ah)->ah_procPhyErr & HAL_PROCESS_ANI)) struct ar5416Stats { u32 ast_ani_niup; @@ -425,7 +416,6 @@ struct ar5416Stats { #define AR5416_EEP_MINOR_VER_7 0x7 #define AR5416_EEP_MINOR_VER_9 0x9 -#define AR5416_EEP_START_LOC 256 #define AR5416_NUM_5G_CAL_PIERS 8 #define AR5416_NUM_2G_CAL_PIERS 4 #define AR5416_NUM_5G_20_TARGET_POWERS 8 @@ -441,25 +431,10 @@ struct ar5416Stats { #define AR5416_EEPROM_MODAL_SPURS 5 #define AR5416_MAX_RATE_POWER 63 #define AR5416_NUM_PDADC_VALUES 128 -#define AR5416_NUM_RATES 16 #define AR5416_BCHAN_UNUSED 0xFF #define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64 -#define AR5416_EEPMISC_BIG_ENDIAN 0x01 #define AR5416_MAX_CHAINS 3 -#define AR5416_ANT_16S 25 - -#define AR5416_NUM_ANT_CHAIN_FIELDS 7 -#define AR5416_NUM_ANT_COMMON_FIELDS 4 -#define AR5416_SIZE_ANT_CHAIN_FIELD 3 -#define AR5416_SIZE_ANT_COMMON_FIELD 4 -#define AR5416_ANT_CHAIN_MASK 0x7 -#define AR5416_ANT_COMMON_MASK 0xf -#define AR5416_CHAIN_0_IDX 0 -#define AR5416_CHAIN_1_IDX 1 -#define AR5416_CHAIN_2_IDX 2 - #define AR5416_PWR_TABLE_OFFSET -5 -#define AR5416_LEGACY_CHAINMASK 1 enum eeprom_param { EEP_NFTHRESH_5, @@ -633,7 +608,7 @@ struct ar5416IniArray { }; #define INIT_INI_ARRAY(iniarray, array, rows, columns) do { \ - (iniarray)->ia_array = (u32 *)(array); \ + (iniarray)->ia_array = (u32 *)(array); \ (iniarray)->ia_rows = (rows); \ (iniarray)->ia_columns = (columns); \ } while (0) @@ -641,16 +616,16 @@ struct ar5416IniArray { #define INI_RA(iniarray, row, column) \ (((iniarray)->ia_array)[(row) * ((iniarray)->ia_columns) + (column)]) -#define INIT_CAL(_perCal) do { \ - (_perCal)->calState = CAL_WAITING; \ - (_perCal)->calNext = NULL; \ +#define INIT_CAL(_perCal) do { \ + (_perCal)->calState = CAL_WAITING; \ + (_perCal)->calNext = NULL; \ } while (0) #define INSERT_CAL(_ahp, _perCal) \ do { \ if ((_ahp)->ah_cal_list_last == NULL) { \ - (_ahp)->ah_cal_list = \ - (_ahp)->ah_cal_list_last = (_perCal); \ + (_ahp)->ah_cal_list = \ + (_ahp)->ah_cal_list_last = (_perCal); \ ((_ahp)->ah_cal_list_last)->calNext = (_perCal); \ } else { \ ((_ahp)->ah_cal_list_last)->calNext = (_perCal); \ @@ -696,25 +671,29 @@ struct hal_cal_list { struct ath_hal_5416 { struct ath_hal ah; struct ar5416_eeprom ah_eeprom; + struct ar5416Stats ah_stats; + struct ath9k_tx_queue_info ah_txq[ATH9K_NUM_TX_QUEUES]; + void __iomem *ah_cal_mem; + u8 ah_macaddr[ETH_ALEN]; u8 ah_bssid[ETH_ALEN]; u8 ah_bssidmask[ETH_ALEN]; u16 ah_assocId; + int16_t ah_curchanRadIndex; u32 ah_maskReg; - struct ar5416Stats ah_stats; - u32 ah_txDescMask; u32 ah_txOkInterruptMask; u32 ah_txErrInterruptMask; u32 ah_txDescInterruptMask; u32 ah_txEolInterruptMask; u32 ah_txUrnInterruptMask; - struct ath9k_tx_queue_info ah_txq[ATH9K_NUM_TX_QUEUES]; - enum ath9k_power_mode ah_powerMode; bool ah_chipFullSleep; u32 ah_atimWindow; - enum ath9k_ant_setting ah_diversityControl; u16 ah_antennaSwitchSwap; + enum ath9k_power_mode ah_powerMode; + enum ath9k_ant_setting ah_diversityControl; + + /* Calibration */ enum hal_cal_types ah_suppCals; struct hal_cal_list ah_iqCalData; struct hal_cal_list ah_adcGainCalData; @@ -751,16 +730,16 @@ struct ath_hal_5416 { int32_t sign[AR5416_MAX_CHAINS]; } ah_Meas3; u16 ah_CalSamples; - u32 ah_tx6PowerInHalfDbm; + u32 ah_staId1Defaults; u32 ah_miscMode; - bool ah_tpcEnabled; - u32 ah_beaconInterval; enum { AUTO_32KHZ, USE_32KHZ, DONT_USE_32KHZ, } ah_enable32kHzClock; + + /* RF */ u32 *ah_analogBank0Data; u32 *ah_analogBank1Data; u32 *ah_analogBank2Data; @@ -770,8 +749,9 @@ struct ath_hal_5416 { u32 *ah_analogBank7Data; u32 *ah_addac5416_21; u32 *ah_bank6Temp; - u32 ah_ofdmTxPower; + int16_t ah_txPowerIndexOffset; + u32 ah_beaconInterval; u32 ah_slottime; u32 ah_acktimeout; u32 ah_ctstimeout; @@ -780,7 +760,8 @@ struct ath_hal_5416 { u32 ah_gpioSelect; u32 ah_polarity; u32 ah_gpioBit; - bool ah_eepEnabled; + + /* ANI */ u32 ah_procPhyErr; bool ah_hasHwPhyCounters; u32 ah_aniPeriod; @@ -790,18 +771,14 @@ struct ath_hal_5416 { int ah_coarseHigh[5]; int ah_coarseLow[5]; int ah_firpwr[5]; - u16 ah_ratesArray[16]; + enum ath9k_ani_cmd ah_ani_function; + u32 ah_intrTxqs; bool ah_intrMitigation; - u32 ah_cycleCount; - u32 ah_ctlBusy; - u32 ah_extBusy; enum ath9k_ht_extprotspacing ah_extprotspacing; u8 ah_txchainmask; u8 ah_rxchainmask; - int ah_hwp; - void __iomem *ah_cal_mem; - enum ath9k_ani_cmd ah_ani_function; + struct ar5416IniArray ah_iniModes; struct ar5416IniArray ah_iniCommon; struct ar5416IniArray ah_iniBank0; @@ -820,10 +797,6 @@ struct ath_hal_5416 { #define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5)) -#define IS_5416_EMU(ah) \ - ((ah->ah_devid == AR5416_DEVID_EMU) || \ - (ah->ah_devid == AR5416_DEVID_EMU_PCIE)) - #define ar5416RfDetach(ah) do { \ if (AH5416(ah)->ah_rfHal.rfDetach != NULL) \ AH5416(ah)->ah_rfHal.rfDetach(ah); \ @@ -841,8 +814,8 @@ struct ath_hal_5416 { #define REG_WRITE_ARRAY(iniarray, column, regWr) do { \ int r; \ for (r = 0; r < ((iniarray)->ia_rows); r++) { \ - REG_WRITE(ah, INI_RA((iniarray), (r), 0), \ - INI_RA((iniarray), r, (column))); \ + REG_WRITE(ah, INI_RA((iniarray), (r), 0), \ + INI_RA((iniarray), r, (column))); \ DO_DELAY(regWr); \ } \ } while (0) @@ -852,30 +825,21 @@ struct ath_hal_5416 { #define COEF_SCALE_S 24 #define HT40_CHANNEL_CENTER_SHIFT 10 -#define ar5416CheckOpMode(_opmode) \ - ((_opmode == ATH9K_M_STA) || (_opmode == ATH9K_M_IBSS) || \ - (_opmode == ATH9K_M_HOSTAP) || (_opmode == ATH9K_M_MONITOR)) - #define AR5416_EEPROM_MAGIC_OFFSET 0x0 #define AR5416_EEPROM_S 2 #define AR5416_EEPROM_OFFSET 0x2000 -#define AR5416_EEPROM_START_ADDR \ +#define AR5416_EEPROM_START_ADDR \ (AR_SREV_9100(ah)) ? 0x1fff1000 : 0x503f1200 #define AR5416_EEPROM_MAX 0xae0 -#define ar5416_get_eep_ver(_ahp) \ +#define ar5416_get_eep_ver(_ahp) \ (((_ahp)->ah_eeprom.baseEepHeader.version >> 12) & 0xF) -#define ar5416_get_eep_rev(_ahp) \ +#define ar5416_get_eep_rev(_ahp) \ (((_ahp)->ah_eeprom.baseEepHeader.version) & 0xFFF) -#define ar5416_get_ntxchains(_txchainmask) \ +#define ar5416_get_ntxchains(_txchainmask) \ (((_txchainmask >> 2) & 1) + \ ((_txchainmask >> 1) & 1) + (_txchainmask & 1)) -#define IS_EEP_MINOR_V3(_ahp) \ - (ath9k_hw_get_eeprom((_ahp), EEP_MINOR_REV) >= AR5416_EEP_MINOR_VER_3) - -#define FIXED_CCA_THRESHOLD 15 - #ifdef __BIG_ENDIAN #define AR5416_EEPROM_MAGIC 0x5aa5 #else @@ -910,8 +874,6 @@ struct ath_hal_5416 { #define AR_GPIOD_MASK 0x00001FFF #define AR_GPIO_BIT(_gpio) (1 << (_gpio)) -#define MAX_ANALOG_START 319 - #define HAL_EP_RND(x, mul) \ ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) #define BEACON_RSSI(ahp) \ @@ -923,8 +885,6 @@ struct ath_hal_5416 { #define AH_TIMEOUT 100000 #define AH_TIME_QUANTUM 10 -#define IS(_c, _f) (((_c)->channelFlags & _f) || 0) - #define AR_KEYTABLE_SIZE 128 #define POWER_UP_TIME 200000 @@ -964,6 +924,6 @@ struct ath_hal_5416 { #define OFDM_SYMBOL_TIME_QUARTER 16 u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp, - enum eeprom_param param); + enum eeprom_param param); #endif diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 99badf1404c..74726990d59 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -22,8 +22,6 @@ #define ATH_PCI_VERSION "0.1" #define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13 -#define IEEE80211_ACTION_CAT_HT 7 -#define IEEE80211_ACTION_HT_TXCHWIDTH 0 static char *dev_info = "ath9k"; @@ -142,7 +140,7 @@ static int ath_key_config(struct ath_softc *sc, struct ath9k_keyval hk; const u8 *mac = NULL; int ret = 0; - enum ieee80211_if_types opmode; + enum nl80211_iftype opmode; memset(&hk, 0, sizeof(hk)); @@ -181,14 +179,14 @@ static int ath_key_config(struct ath_softc *sc, */ if (is_broadcast_ether_addr(addr)) { switch (opmode) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: /* default key: could be group WPA key * or could be static WEP key */ mac = NULL; break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: break; - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_AP: break; default: ASSERT(0); @@ -206,37 +204,30 @@ static int ath_key_config(struct ath_softc *sc, if (!ret) return -EIO; - if (mac) - sc->sc_keytype = hk.kv_type; return 0; } static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key) { -#define ATH_MAX_NUM_KEYS 4 int freeslot; - freeslot = (key->keyidx >= ATH_MAX_NUM_KEYS) ? 1 : 0; + freeslot = (key->keyidx >= 4) ? 1 : 0; ath_key_reset(sc, key->keyidx, freeslot); -#undef ATH_MAX_NUM_KEYS } static void setup_ht_cap(struct ieee80211_ht_info *ht_info) { -/* Until mac80211 includes these fields */ - -#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ -#define IEEE80211_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ +#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ +#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ ht_info->ht_supported = 1; ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH - |(u16)IEEE80211_HT_CAP_MIMO_PS + |(u16)IEEE80211_HT_CAP_SM_PS |(u16)IEEE80211_HT_CAP_SGI_40 |(u16)IEEE80211_HT_CAP_DSSSCCK40; - ht_info->ampdu_factor = IEEE80211_HT_CAP_MAXRXAMPDU_65536; - ht_info->ampdu_density = IEEE80211_HT_CAP_MPDUDENSITY_8; + ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536; + ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8; /* setup supported mcs set */ memset(ht_info->supp_mcs_set, 0, 16); ht_info->supp_mcs_set[0] = 0xff; @@ -283,10 +274,12 @@ static void ath9k_rx_prepare(struct ath_softc *sc, rx_status->mactime = status->tsf; rx_status->band = curchan->band; rx_status->freq = curchan->center_freq; - rx_status->noise = ATH_DEFAULT_NOISE_FLOOR; + rx_status->noise = sc->sc_ani.sc_noise_floor; rx_status->signal = rx_status->noise + status->rssi; rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100)); rx_status->antenna = status->antenna; + + /* XXX Fix me, 64 cannot be the max rssi value, rigure it out */ rx_status->qual = status->rssi * 100 / 64; if (status->flags & ATH_RX_MIC_ERROR) @@ -332,6 +325,698 @@ static u8 parse_mpdudensity(u8 mpdudensity) } } +static void ath9k_ht_conf(struct ath_softc *sc, + struct ieee80211_bss_conf *bss_conf) +{ +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14) + struct ath_ht_info *ht_info = &sc->sc_ht_info; + + if (bss_conf->assoc_ht) { + ht_info->ext_chan_offset = + bss_conf->ht_bss_conf->bss_cap & + IEEE80211_HT_IE_CHA_SEC_OFFSET; + + if (!(bss_conf->ht_conf->cap & + IEEE80211_HT_CAP_40MHZ_INTOLERANT) && + (bss_conf->ht_bss_conf->bss_cap & + IEEE80211_HT_IE_CHA_WIDTH)) + ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; + else + ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; + + ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); + ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + bss_conf->ht_conf->ampdu_factor); + ht_info->mpdudensity = + parse_mpdudensity(bss_conf->ht_conf->ampdu_density); + + } + +#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT +} + +static void ath9k_bss_assoc_info(struct ath_softc *sc, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_channel *curchan = hw->conf.channel; + struct ath_vap *avp; + int pos; + DECLARE_MAC_BUF(mac); + + if (bss_conf->assoc) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n", + __func__, + bss_conf->aid); + + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return; + } + + /* New association, store aid */ + if (avp->av_opmode == ATH9K_M_STA) { + sc->sc_curaid = bss_conf->aid; + ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, + sc->sc_curaid); + } + + /* Configure the beacon */ + ath_beacon_config(sc, 0); + sc->sc_flags |= SC_OP_BEACONS; + + /* Reset rssi stats */ + sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; + + /* Update chainmask */ + ath_update_chainmask(sc, bss_conf->assoc_ht); + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: bssid %s aid 0x%x\n", + __func__, + print_mac(mac, sc->sc_curbssid), sc->sc_curaid); + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", + __func__, + curchan->center_freq); + + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Invalid channel\n", __func__); + return; + } + + if (hw->conf.ht_conf.ht_supported) + sc->sc_ah->ah_channels[pos].chanmode = + ath_get_extchanmode(sc, curchan); + else + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? + CHANNEL_G : CHANNEL_A; + + /* set h/w channel */ + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to set channel\n", + __func__); + + ath_rate_newstate(sc, avp); + /* Update ratectrl about the new state */ + ath_rc_node_update(hw, avp->rc_node); + + /* Start ANI */ + mod_timer(&sc->sc_ani.timer, + jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); + + } else { + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Bss Info DISSOC\n", __func__); + sc->sc_curaid = 0; + } +} + +void ath_get_beaconconfig(struct ath_softc *sc, + int if_id, + struct ath_beacon_config *conf) +{ + struct ieee80211_hw *hw = sc->hw; + + /* fill in beacon config data */ + + conf->beacon_interval = hw->conf.beacon_int; + conf->listen_interval = 100; + conf->dtim_count = 1; + conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; +} + +void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, + struct ath_xmit_status *tx_status, struct ath_node *an) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + + DPRINTF(sc, ATH_DBG_XMIT, + "%s: TX complete: skb: %p\n", __func__, skb); + + if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || + tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { + /* free driver's private data area of tx_info */ + if (tx_info->driver_data[0] != NULL) + kfree(tx_info->driver_data[0]); + tx_info->driver_data[0] = NULL; + } + + if (tx_status->flags & ATH_TX_BAR) { + tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + tx_status->flags &= ~ATH_TX_BAR; + } + + if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + /* Frame was not ACKed, but an ACK was expected */ + tx_info->status.excessive_retries = 1; + } + } else { + /* Frame was ACKed */ + tx_info->flags |= IEEE80211_TX_STAT_ACK; + } + + tx_info->status.retry_count = tx_status->retries; + + ieee80211_tx_status(hw, skb); + if (an) + ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); +} + +int _ath_rx_indicate(struct ath_softc *sc, + struct sk_buff *skb, + struct ath_recv_status *status, + u16 keyix) +{ + struct ieee80211_hw *hw = sc->hw; + struct ath_node *an = NULL; + struct ieee80211_rx_status rx_status; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + int hdrlen = ieee80211_get_hdrlen_from_skb(skb); + int padsize; + enum ATH_RX_TYPE st; + + /* see if any padding is done by the hw and remove it */ + if (hdrlen & 3) { + padsize = hdrlen % 4; + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + + /* Prepare rx status */ + ath9k_rx_prepare(sc, skb, status, &rx_status); + + if (!(keyix == ATH9K_RXKEYIX_INVALID) && + !(status->flags & ATH_RX_DECRYPT_ERROR)) { + rx_status.flag |= RX_FLAG_DECRYPTED; + } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) + && !(status->flags & ATH_RX_DECRYPT_ERROR) + && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, sc->sc_keymap)) + rx_status.flag |= RX_FLAG_DECRYPTED; + } + + spin_lock_bh(&sc->node_lock); + an = ath_node_find(sc, hdr->addr2); + spin_unlock_bh(&sc->node_lock); + + if (an) { + ath_rx_input(sc, an, + hw->conf.ht_conf.ht_supported, + skb, status, &st); + } + if (!an || (st != ATH_RX_CONSUMED)) + __ieee80211_rx(hw, skb, &rx_status); + + return 0; +} + +int ath_rx_subframe(struct ath_node *an, + struct sk_buff *skb, + struct ath_recv_status *status) +{ + struct ath_softc *sc = an->an_sc; + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_rx_status rx_status; + + /* Prepare rx status */ + ath9k_rx_prepare(sc, skb, status, &rx_status); + if (!(status->flags & ATH_RX_DECRYPT_ERROR)) + rx_status.flag |= RX_FLAG_DECRYPTED; + + __ieee80211_rx(hw, skb, &rx_status); + + return 0; +} + +/********************************/ +/* LED functions */ +/********************************/ + +static void ath_led_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev); + struct ath_softc *sc = led->sc; + + switch (brightness) { + case LED_OFF: + if (led->led_type == ATH_LED_ASSOC || + led->led_type == ATH_LED_RADIO) + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, + (led->led_type == ATH_LED_RADIO) ? 1 : + !!(sc->sc_flags & SC_OP_LED_ASSOCIATED)); + break; + case LED_FULL: + if (led->led_type == ATH_LED_ASSOC) + sc->sc_flags |= SC_OP_LED_ASSOCIATED; + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); + break; + default: + break; + } +} + +static int ath_register_led(struct ath_softc *sc, struct ath_led *led, + char *trigger) +{ + int ret; + + led->sc = sc; + led->led_cdev.name = led->name; + led->led_cdev.default_trigger = trigger; + led->led_cdev.brightness_set = ath_led_brightness; + + ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, + "Failed to register led:%s", led->name); + else + led->registered = 1; + return ret; +} + +static void ath_unregister_led(struct ath_led *led) +{ + if (led->registered) { + led_classdev_unregister(&led->led_cdev); + led->registered = 0; + } +} + +static void ath_deinit_leds(struct ath_softc *sc) +{ + ath_unregister_led(&sc->assoc_led); + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath_unregister_led(&sc->tx_led); + ath_unregister_led(&sc->rx_led); + ath_unregister_led(&sc->radio_led); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); +} + +static void ath_init_leds(struct ath_softc *sc) +{ + char *trigger; + int ret; + + /* Configure gpio 1 for output */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + /* LED off, active low */ + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + + trigger = ieee80211_get_radio_led_name(sc->hw); + snprintf(sc->radio_led.name, sizeof(sc->radio_led.name), + "ath9k-%s:radio", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->radio_led, trigger); + sc->radio_led.led_type = ATH_LED_RADIO; + if (ret) + goto fail; + + trigger = ieee80211_get_assoc_led_name(sc->hw); + snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name), + "ath9k-%s:assoc", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->assoc_led, trigger); + sc->assoc_led.led_type = ATH_LED_ASSOC; + if (ret) + goto fail; + + trigger = ieee80211_get_tx_led_name(sc->hw); + snprintf(sc->tx_led.name, sizeof(sc->tx_led.name), + "ath9k-%s:tx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->tx_led, trigger); + sc->tx_led.led_type = ATH_LED_TX; + if (ret) + goto fail; + + trigger = ieee80211_get_rx_led_name(sc->hw); + snprintf(sc->rx_led.name, sizeof(sc->rx_led.name), + "ath9k-%s:rx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->rx_led, trigger); + sc->rx_led.led_type = ATH_LED_RX; + if (ret) + goto fail; + + return; + +fail: + ath_deinit_leds(sc); +} + +#ifdef CONFIG_RFKILL +/*******************/ +/* Rfkill */ +/*******************/ + +static void ath_radio_enable(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, + sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, + false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", __func__, + ath9k_hw_mhz2ieee(ah, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags), + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags, status); + } + spin_unlock_bh(&sc->sc_resetlock); + + ath_update_txpow(sc); + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to restart recv logic\n", __func__); + return; + } + + if (sc->sc_flags & SC_OP_BEACONS) + ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + + /* Re-Enable interrupts */ + ath9k_hw_set_interrupts(ah, sc->sc_imask); + + /* Enable LED */ + ath9k_hw_cfg_output(ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0); + + ieee80211_wake_queues(sc->hw); +} + +static void ath_radio_disable(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + + + ieee80211_stop_queues(sc->hw); + + /* Disable LED */ + ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1); + ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN); + + /* Disable interrupts */ + ath9k_hw_set_interrupts(ah, 0); + + ath_draintxq(sc, false); /* clear pending tx frames */ + ath_stoprecv(sc); /* turn off frame recv */ + ath_flushrecv(sc); /* flush recv queue */ + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, + sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, + false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", __func__, + ath9k_hw_mhz2ieee(ah, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags), + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags, status); + } + spin_unlock_bh(&sc->sc_resetlock); + + ath9k_hw_phy_disable(ah); + ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); +} + +static bool ath_is_rfkill_set(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + + return ath9k_hw_gpio_get(ah, ah->ah_rfkill_gpio) == + ah->ah_rfkill_polarity; +} + +/* h/w rfkill poll function */ +static void ath_rfkill_poll(struct work_struct *work) +{ + struct ath_softc *sc = container_of(work, struct ath_softc, + rf_kill.rfkill_poll.work); + bool radio_on; + + if (sc->sc_flags & SC_OP_INVALID) + return; + + radio_on = !ath_is_rfkill_set(sc); + + /* + * enable/disable radio only when there is a + * state change in RF switch + */ + if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) { + enum rfkill_state state; + + if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) { + state = radio_on ? RFKILL_STATE_SOFT_BLOCKED + : RFKILL_STATE_HARD_BLOCKED; + } else if (radio_on) { + ath_radio_enable(sc); + state = RFKILL_STATE_UNBLOCKED; + } else { + ath_radio_disable(sc); + state = RFKILL_STATE_HARD_BLOCKED; + } + + if (state == RFKILL_STATE_HARD_BLOCKED) + sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED; + else + sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED; + + rfkill_force_state(sc->rf_kill.rfkill, state); + } + + queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll, + msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL)); +} + +/* s/w rfkill handler */ +static int ath_sw_toggle_radio(void *data, enum rfkill_state state) +{ + struct ath_softc *sc = data; + + switch (state) { + case RFKILL_STATE_SOFT_BLOCKED: + if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED | + SC_OP_RFKILL_SW_BLOCKED))) + ath_radio_disable(sc); + sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED; + return 0; + case RFKILL_STATE_UNBLOCKED: + if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) { + sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED; + if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) { + DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the" + "radio as it is disabled by h/w \n"); + return -EPERM; + } + ath_radio_enable(sc); + } + return 0; + default: + return -EINVAL; + } +} + +/* Init s/w rfkill */ +static int ath_init_sw_rfkill(struct ath_softc *sc) +{ + sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy), + RFKILL_TYPE_WLAN); + if (!sc->rf_kill.rfkill) { + DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n"); + return -ENOMEM; + } + + snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), + "ath9k-%s:rfkill", wiphy_name(sc->hw->wiphy)); + sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name; + sc->rf_kill.rfkill->data = sc; + sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio; + sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED; + sc->rf_kill.rfkill->user_claim_unsupported = 1; + + return 0; +} + +/* Deinitialize rfkill */ +static void ath_deinit_rfkill(struct ath_softc *sc) +{ + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); + + if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) { + rfkill_unregister(sc->rf_kill.rfkill); + sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED; + sc->rf_kill.rfkill = NULL; + } +} +#endif /* CONFIG_RFKILL */ + +static int ath_detach(struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); + + /* Deinit LED control */ + ath_deinit_leds(sc); + +#ifdef CONFIG_RFKILL + /* deinit rfkill */ + ath_deinit_rfkill(sc); +#endif + + /* Unregister hw */ + + ieee80211_unregister_hw(hw); + + /* unregister Rate control */ + ath_rate_control_unregister(); + + /* tx/rx cleanup */ + + ath_rx_cleanup(sc); + ath_tx_cleanup(sc); + + /* Deinit */ + + ath_deinit(sc); + + return 0; +} + +static int ath_attach(u16 devid, + struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + int error = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__); + + error = ath_init(devid, sc); + if (error != 0) + return error; + + /* Init nodes */ + + INIT_LIST_HEAD(&sc->node_list); + spin_lock_init(&sc->node_lock); + + /* get mac address from hardware and set in mac80211 */ + + SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); + + /* setup channels and rates */ + + sc->sbands[IEEE80211_BAND_2GHZ].channels = + sc->channels[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].bitrates = + sc->rates[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + /* Setup HT capabilities for 2.4Ghz*/ + setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info); + + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &sc->sbands[IEEE80211_BAND_2GHZ]; + + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { + sc->sbands[IEEE80211_BAND_5GHZ].channels = + sc->channels[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].bitrates = + sc->rates[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].band = + IEEE80211_BAND_5GHZ; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + /* Setup HT capabilities for 5Ghz*/ + setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info); + + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &sc->sbands[IEEE80211_BAND_5GHZ]; + } + + /* FIXME: Have to figure out proper hw init values later */ + + hw->queues = 4; + hw->ampdu_queues = 1; + + /* Register rate control */ + hw->rate_control_algorithm = "ath9k_rate_control"; + error = ath_rate_control_register(); + if (error != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to register rate control " + "algorithm:%d\n", __func__, error); + ath_rate_control_unregister(); + goto bad; + } + + error = ieee80211_register_hw(hw); + if (error != 0) { + ath_rate_control_unregister(); + goto bad; + } + + /* Initialize LED control */ + ath_init_leds(sc); + +#ifdef CONFIG_RFKILL + /* Initialze h/w Rfkill */ + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll); + + /* Initialize s/w rfkill */ + if (ath_init_sw_rfkill(sc)) + goto detach; +#endif + + /* initialize tx/rx engine */ + + error = ath_tx_init(sc, ATH_TXBUF); + if (error != 0) + goto detach; + + error = ath_rx_init(sc, ATH_RXBUF); + if (error != 0) + goto detach; + + return 0; +detach: + ath_detach(sc); +bad: + return error; +} + static int ath9k_start(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; @@ -360,6 +1045,33 @@ static int ath9k_start(struct ieee80211_hw *hw) return error; } +#ifdef CONFIG_RFKILL + /* Start rfkill polling */ + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + queue_delayed_work(sc->hw->workqueue, + &sc->rf_kill.rfkill_poll, 0); + + if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { + if (rfkill_register(sc->rf_kill.rfkill)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to register rfkill\n"); + rfkill_free(sc->rf_kill.rfkill); + + /* Deinitialize the device */ + if (sc->pdev->irq) + free_irq(sc->pdev->irq, sc); + ath_detach(sc); + pci_iounmap(sc->pdev, sc->mem); + pci_release_region(sc->pdev, 0); + pci_disable_device(sc->pdev); + ieee80211_free_hw(hw); + return -EIO; + } else { + sc->sc_flags |= SC_OP_RFKILL_REGISTERED; + } + } +#endif + ieee80211_wake_queues(hw); return 0; } @@ -421,6 +1133,11 @@ static void ath9k_stop(struct ieee80211_hw *hw) "%s: Device is no longer present\n", __func__); ieee80211_stop_queues(hw); + +#ifdef CONFIG_RFKILL + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); +#endif } static int ath9k_add_interface(struct ieee80211_hw *hw, @@ -435,16 +1152,19 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, return -ENOBUFS; switch (conf->type) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: ic_opmode = ATH9K_M_STA; break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: ic_opmode = ATH9K_M_IBSS; break; + case NL80211_IFTYPE_AP: + ic_opmode = ATH9K_M_HOSTAP; + break; default: DPRINTF(sc, ATH_DBG_FATAL, - "%s: Only STA and IBSS are supported currently\n", - __func__); + "%s: Interface type %d not yet supported\n", + __func__, conf->type); return -EOPNOTSUPP; } @@ -460,6 +1180,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, return error; } + if (conf->type == NL80211_IFTYPE_AP) { + /* TODO: is this a suitable place to start ANI for AP mode? */ + /* Start ANI */ + mod_timer(&sc->sc_ani.timer, + jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); + } + return 0; } @@ -482,12 +1209,15 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, #ifdef CONFIG_SLOW_ANT_DIV ath_slow_ant_div_stop(&sc->sc_antdiv); #endif + /* Stop ANI */ + del_timer_sync(&sc->sc_ani.timer); /* Update ratectrl */ ath_rate_newstate(sc, avp); /* Reclaim beacon resources */ - if (sc->sc_opmode == ATH9K_M_HOSTAP || sc->sc_opmode == ATH9K_M_IBSS) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || + sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); ath_beacon_return(sc, avp); } @@ -495,7 +1225,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, /* Set interrupt mask */ sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL); - sc->sc_beacons = 0; + sc->sc_flags &= ~SC_OP_BEACONS; error = ath_vap_detach(sc, 0); if (error) @@ -544,6 +1274,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, struct ieee80211_if_conf *conf) { struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; struct ath_vap *avp; u32 rfilt = 0; int error, i; @@ -556,18 +1287,25 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, return -EINVAL; } + /* TODO: Need to decide which hw opmode to use for multi-interface + * cases */ + if (vif->type == NL80211_IFTYPE_AP && + ah->ah_opmode != ATH9K_M_HOSTAP) { + ah->ah_opmode = ATH9K_M_HOSTAP; + ath9k_hw_setopmode(ah); + ath9k_hw_write_associd(ah, sc->sc_myaddr, 0); + /* Request full reset to get hw opmode changed properly */ + sc->sc_flags |= SC_OP_FULL_RESET; + } + if ((conf->changed & IEEE80211_IFCC_BSSID) && !is_zero_ether_addr(conf->bssid)) { switch (vif->type) { - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: /* Update ratectrl about the new state */ ath_rate_newstate(sc, avp); - /* Set rx filter */ - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(sc->sc_ah, rfilt); - /* Set BSSID */ memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); sc->sc_curaid = 0; @@ -600,7 +1338,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, print_mac(mac, sc->sc_curbssid), sc->sc_curaid); /* need to reconfigure the beacon */ - sc->sc_beacons = 0; + sc->sc_flags &= ~SC_OP_BEACONS ; break; default: @@ -609,7 +1347,8 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, } if ((conf->changed & IEEE80211_IFCC_BEACON) && - (vif->type == IEEE80211_IF_TYPE_IBSS)) { + ((vif->type == NL80211_IFTYPE_ADHOC) || + (vif->type == NL80211_IFTYPE_AP))) { /* * Allocate and setup the beacon frame. * @@ -628,7 +1367,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, } /* Check for WLAN_CAPABILITY_PRIVACY ? */ - if ((avp->av_opmode != IEEE80211_IF_TYPE_STA)) { + if ((avp->av_opmode != NL80211_IFTYPE_STATION)) { for (i = 0; i < IEEE80211_WEP_NKID; i++) if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) ath9k_hw_keysetmac(sc->sc_ah, @@ -637,7 +1376,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, } /* Only legacy IBSS for now */ - if (vif->type == IEEE80211_IF_TYPE_IBSS) + if (vif->type == NL80211_IFTYPE_ADHOC) ath_update_chainmask(sc, 0); return 0; @@ -651,8 +1390,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, FIF_BCN_PRBRESP_PROMISC | \ FIF_FCSFAIL) -/* Accept unicast, bcast and mcast frames */ - +/* FIXME: sc->sc_full_reset ? */ static void ath9k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, @@ -660,22 +1398,28 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw, struct dev_mc_list *mclist) { struct ath_softc *sc = hw->priv; + u32 rfilt; changed_flags &= SUPPORTED_FILTERS; *total_flags &= SUPPORTED_FILTERS; + sc->rx_filter = *total_flags; + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(sc->sc_ah, rfilt); + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - ath_scan_start(sc); - else - ath_scan_end(sc); + ath9k_hw_write_associd(sc->sc_ah, ath_bcast_mac, 0); } + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set HW RX filter: 0x%x\n", + __func__, sc->rx_filter); } static void ath9k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd cmd, - const u8 *addr) + struct ieee80211_sta *sta) { struct ath_softc *sc = hw->priv; struct ath_node *an; @@ -683,19 +1427,18 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw, DECLARE_MAC_BUF(mac); spin_lock_irqsave(&sc->node_lock, flags); - an = ath_node_find(sc, (u8 *) addr); + an = ath_node_find(sc, sta->addr); spin_unlock_irqrestore(&sc->node_lock, flags); switch (cmd) { case STA_NOTIFY_ADD: spin_lock_irqsave(&sc->node_lock, flags); if (!an) { - ath_node_attach(sc, (u8 *)addr, 0); + ath_node_attach(sc, sta->addr, 0); DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n", - __func__, - print_mac(mac, addr)); + __func__, print_mac(mac, sta->addr)); } else { - ath_node_get(sc, (u8 *)addr); + ath_node_get(sc, sta->addr); } spin_unlock_irqrestore(&sc->node_lock, flags); break; @@ -708,7 +1451,7 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw, ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT); DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n", __func__, - print_mac(mac, addr)); + print_mac(mac, sta->addr)); } break; default: @@ -778,7 +1521,6 @@ static int ath9k_set_key(struct ieee80211_hw *hw, case DISABLE_KEY: ath_key_delete(sc, key); clear_bit(key->keyidx, sc->sc_keymap); - sc->sc_keytype = ATH9K_CIPHER_CLR; break; default: ret = -EINVAL; @@ -787,117 +1529,6 @@ static int ath9k_set_key(struct ieee80211_hw *hw, return ret; } -static void ath9k_ht_conf(struct ath_softc *sc, - struct ieee80211_bss_conf *bss_conf) -{ -#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14) - struct ath_ht_info *ht_info = &sc->sc_ht_info; - - if (bss_conf->assoc_ht) { - ht_info->ext_chan_offset = - bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_IE_CHA_SEC_OFFSET; - - if (!(bss_conf->ht_conf->cap & - IEEE80211_HT_CAP_40MHZ_INTOLERANT) && - (bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_IE_CHA_WIDTH)) - ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; - else - ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; - - ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); - ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - bss_conf->ht_conf->ampdu_factor); - ht_info->mpdudensity = - parse_mpdudensity(bss_conf->ht_conf->ampdu_density); - - } - -#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT -} - -static void ath9k_bss_assoc_info(struct ath_softc *sc, - struct ieee80211_bss_conf *bss_conf) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_channel *curchan = hw->conf.channel; - struct ath_vap *avp; - int pos; - DECLARE_MAC_BUF(mac); - - if (bss_conf->assoc) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n", - __func__, - bss_conf->aid); - - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return; - } - - /* New association, store aid */ - if (avp->av_opmode == ATH9K_M_STA) { - sc->sc_curaid = bss_conf->aid; - ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, - sc->sc_curaid); - } - - /* Configure the beacon */ - ath_beacon_config(sc, 0); - sc->sc_beacons = 1; - - /* Reset rssi stats */ - sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; - sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; - sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; - sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; - - /* Update chainmask */ - ath_update_chainmask(sc, bss_conf->assoc_ht); - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: bssid %s aid 0x%x\n", - __func__, - print_mac(mac, sc->sc_curbssid), sc->sc_curaid); - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", - __func__, - curchan->center_freq); - - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Invalid channel\n", __func__); - return; - } - - if (hw->conf.ht_conf.ht_supported) - sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); - else - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; - - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to set channel\n", - __func__); - - ath_rate_newstate(sc, avp); - /* Update ratectrl about the new state */ - ath_rc_node_update(hw, avp->rc_node); - } else { - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Bss Info DISSOC\n", __func__); - sc->sc_curaid = 0; - } -} - static void ath9k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, @@ -910,9 +1541,9 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, __func__, bss_conf->use_short_preamble); if (bss_conf->use_short_preamble) - sc->sc_flags |= ATH_PREAMBLE_SHORT; + sc->sc_flags |= SC_OP_PREAMBLE_SHORT; else - sc->sc_flags &= ~ATH_PREAMBLE_SHORT; + sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; } if (changed & BSS_CHANGED_ERP_CTS_PROT) { @@ -921,9 +1552,9 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, bss_conf->use_cts_prot); if (bss_conf->use_cts_prot && hw->conf.channel->band != IEEE80211_BAND_5GHZ) - sc->sc_flags |= ATH_PROTECT_ENABLE; + sc->sc_flags |= SC_OP_PROTECT_ENABLE; else - sc->sc_flags &= ~ATH_PROTECT_ENABLE; + sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; } if (changed & BSS_CHANGED_HT) { @@ -962,45 +1593,44 @@ static void ath9k_reset_tsf(struct ieee80211_hw *hw) static int ath9k_ampdu_action(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, - const u8 *addr, - u16 tid, - u16 *ssn) + struct ieee80211_sta *sta, + u16 tid, u16 *ssn) { struct ath_softc *sc = hw->priv; int ret = 0; switch (action) { case IEEE80211_AMPDU_RX_START: - ret = ath_rx_aggr_start(sc, addr, tid, ssn); + ret = ath_rx_aggr_start(sc, sta->addr, tid, ssn); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to start RX aggregation\n", __func__); break; case IEEE80211_AMPDU_RX_STOP: - ret = ath_rx_aggr_stop(sc, addr, tid); + ret = ath_rx_aggr_stop(sc, sta->addr, tid); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to stop RX aggregation\n", __func__); break; case IEEE80211_AMPDU_TX_START: - ret = ath_tx_aggr_start(sc, addr, tid, ssn); + ret = ath_tx_aggr_start(sc, sta->addr, tid, ssn); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to start TX aggregation\n", __func__); else - ieee80211_start_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid); break; case IEEE80211_AMPDU_TX_STOP: - ret = ath_tx_aggr_stop(sc, addr, tid); + ret = ath_tx_aggr_stop(sc, sta->addr, tid); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to stop TX aggregation\n", __func__); - ieee80211_stop_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid); break; default: DPRINTF(sc, ATH_DBG_FATAL, @@ -1037,260 +1667,6 @@ static struct ieee80211_ops ath9k_ops = { .ampdu_action = ath9k_ampdu_action }; -void ath_get_beaconconfig(struct ath_softc *sc, - int if_id, - struct ath_beacon_config *conf) -{ - struct ieee80211_hw *hw = sc->hw; - - /* fill in beacon config data */ - - conf->beacon_interval = hw->conf.beacon_int; - conf->listen_interval = 100; - conf->dtim_count = 1; - conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; -} - -int ath_update_beacon(struct ath_softc *sc, - int if_id, - struct ath_beacon_offset *bo, - struct sk_buff *skb, - int mcast) -{ - return 0; -} - -void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, - struct ath_xmit_status *tx_status, struct ath_node *an) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - - DPRINTF(sc, ATH_DBG_XMIT, - "%s: TX complete: skb: %p\n", __func__, skb); - - if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || - tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info */ - if (tx_info->driver_data[0] != NULL) - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } - - if (tx_status->flags & ATH_TX_BAR) { - tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - tx_status->flags &= ~ATH_TX_BAR; - } - - if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - /* Frame was not ACKed, but an ACK was expected */ - tx_info->status.excessive_retries = 1; - } - } else { - /* Frame was ACKed */ - tx_info->flags |= IEEE80211_TX_STAT_ACK; - } - - tx_info->status.retry_count = tx_status->retries; - - ieee80211_tx_status(hw, skb); - if (an) - ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); -} - -int ath__rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix) -{ - struct ieee80211_hw *hw = sc->hw; - struct ath_node *an = NULL; - struct ieee80211_rx_status rx_status; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - int hdrlen = ieee80211_get_hdrlen_from_skb(skb); - int padsize; - enum ATH_RX_TYPE st; - - /* see if any padding is done by the hw and remove it */ - if (hdrlen & 3) { - padsize = hdrlen % 4; - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - /* remove FCS before passing up to protocol stack */ - skb_trim(skb, (skb->len - FCS_LEN)); - - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - - if (!(keyix == ATH9K_RXKEYIX_INVALID) && - !(status->flags & ATH_RX_DECRYPT_ERROR)) { - rx_status.flag |= RX_FLAG_DECRYPTED; - } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) - && !(status->flags & ATH_RX_DECRYPT_ERROR) - && skb->len >= hdrlen + 4) { - keyix = skb->data[hdrlen + 3] >> 6; - - if (test_bit(keyix, sc->sc_keymap)) - rx_status.flag |= RX_FLAG_DECRYPTED; - } - - spin_lock_bh(&sc->node_lock); - an = ath_node_find(sc, hdr->addr2); - spin_unlock_bh(&sc->node_lock); - - if (an) { - ath_rx_input(sc, an, - hw->conf.ht_conf.ht_supported, - skb, status, &st); - } - if (!an || (st != ATH_RX_CONSUMED)) - __ieee80211_rx(hw, skb, &rx_status); - - return 0; -} - -int ath_rx_subframe(struct ath_node *an, - struct sk_buff *skb, - struct ath_recv_status *status) -{ - struct ath_softc *sc = an->an_sc; - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_rx_status rx_status; - - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - if (!(status->flags & ATH_RX_DECRYPT_ERROR)) - rx_status.flag |= RX_FLAG_DECRYPTED; - - __ieee80211_rx(hw, skb, &rx_status); - - return 0; -} - -enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc) -{ - return sc->sc_ht_info.tx_chan_width; -} - -static int ath_detach(struct ath_softc *sc) -{ - struct ieee80211_hw *hw = sc->hw; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); - - /* Unregister hw */ - - ieee80211_unregister_hw(hw); - - /* unregister Rate control */ - ath_rate_control_unregister(); - - /* tx/rx cleanup */ - - ath_rx_cleanup(sc); - ath_tx_cleanup(sc); - - /* Deinit */ - - ath_deinit(sc); - - return 0; -} - -static int ath_attach(u16 devid, - struct ath_softc *sc) -{ - struct ieee80211_hw *hw = sc->hw; - int error = 0; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__); - - error = ath_init(devid, sc); - if (error != 0) - return error; - - /* Init nodes */ - - INIT_LIST_HEAD(&sc->node_list); - spin_lock_init(&sc->node_lock); - - /* get mac address from hardware and set in mac80211 */ - - SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); - - /* setup channels and rates */ - - sc->sbands[IEEE80211_BAND_2GHZ].channels = - sc->channels[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].bitrates = - sc->rates[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; - - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - /* Setup HT capabilities for 2.4Ghz*/ - setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info); - - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &sc->sbands[IEEE80211_BAND_2GHZ]; - - if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { - sc->sbands[IEEE80211_BAND_5GHZ].channels = - sc->channels[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].bitrates = - sc->rates[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].band = - IEEE80211_BAND_5GHZ; - - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - /* Setup HT capabilities for 5Ghz*/ - setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info); - - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &sc->sbands[IEEE80211_BAND_5GHZ]; - } - - /* FIXME: Have to figure out proper hw init values later */ - - hw->queues = 4; - hw->ampdu_queues = 1; - - /* Register rate control */ - hw->rate_control_algorithm = "ath9k_rate_control"; - error = ath_rate_control_register(); - if (error != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to register rate control " - "algorithm:%d\n", __func__, error); - ath_rate_control_unregister(); - goto bad; - } - - error = ieee80211_register_hw(hw); - if (error != 0) { - ath_rate_control_unregister(); - goto bad; - } - - /* initialize tx/rx engine */ - - error = ath_tx_init(sc, ATH_TXBUF); - if (error != 0) - goto bad1; - - error = ath_rx_init(sc, ATH_RXBUF); - if (error != 0) - goto bad1; - - return 0; -bad1: - ath_detach(sc); -bad: - return error; -} - static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { void __iomem *mem; @@ -1364,9 +1740,16 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto bad2; } - hw->flags = IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + SET_IEEE80211_DEV(hw, &pdev->dev); pci_set_drvdata(pdev, hw); @@ -1414,10 +1797,17 @@ static void ath_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_softc *sc = hw->priv; + enum ath9k_int status; - if (pdev->irq) + if (pdev->irq) { + ath9k_hw_set_interrupts(sc->sc_ah, 0); + /* clear the ISR */ + ath9k_hw_getisr(sc->sc_ah, &status); + sc->sc_flags |= SC_OP_INVALID; free_irq(pdev->irq, sc); + } ath_detach(sc); + pci_iounmap(pdev, sc->mem); pci_release_region(pdev, 0); pci_disable_device(pdev); @@ -1428,6 +1818,16 @@ static void ath_pci_remove(struct pci_dev *pdev) static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) { + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + +#ifdef CONFIG_RFKILL + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); +#endif + pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, 3); @@ -1437,6 +1837,8 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) static int ath_pci_resume(struct pci_dev *pdev) { + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; u32 val; int err; @@ -1453,6 +1855,21 @@ static int ath_pci_resume(struct pci_dev *pdev) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + /* Enable LED */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + +#ifdef CONFIG_RFKILL + /* + * check the h/w rfkill state on resume + * and start the rfkill poll timer + */ + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + queue_delayed_work(sc->hw->workqueue, + &sc->rf_kill.rfkill_poll, 0); +#endif + return 0; } diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath9k/phy.h index 0cd399a5344..14702344448 100644 --- a/drivers/net/wireless/ath9k/phy.h +++ b/drivers/net/wireless/ath9k/phy.h @@ -18,19 +18,19 @@ #define PHY_H bool ath9k_hw_ar9280_set_channel(struct ath_hal *ah, - struct ath9k_channel - *chan); + struct ath9k_channel + *chan); bool ath9k_hw_set_channel(struct ath_hal *ah, - struct ath9k_channel *chan); + struct ath9k_channel *chan); void ath9k_hw_write_regs(struct ath_hal *ah, u32 modesIndex, u32 freqIndex, int regWrites); bool ath9k_hw_set_rf_regs(struct ath_hal *ah, - struct ath9k_channel *chan, - u16 modesIndex); + struct ath9k_channel *chan, + u16 modesIndex); void ath9k_hw_decrease_chain_power(struct ath_hal *ah, struct ath9k_channel *chan); bool ath9k_hw_init_rf(struct ath_hal *ah, - int *status); + int *status); #define AR_PHY_BASE 0x9800 #define AR_PHY(_n) (AR_PHY_BASE + ((_n)<<2)) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 73c460ad355..cca2fc5b076 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -20,6 +20,7 @@ */ #include "core.h" +/* FIXME: remove this include! */ #include "../net/mac80211/rate.h" static u32 tx_triglevel_max; @@ -653,8 +654,8 @@ ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv); for (i = 0; i < rate_table->rate_cnt; i++) { valid = (ath_rc_priv->single_stream ? - rate_table->info[i].valid_single_stream : - rate_table->info[i].valid); + rate_table->info[i].valid_single_stream : + rate_table->info[i].valid); if (valid == TRUE) { u32 phy = rate_table->info[i].phy; u8 valid_rate_count = 0; @@ -740,14 +741,14 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, for (j = 0; j < rate_table->rate_cnt; j++) { u32 phy = rate_table->info[j].phy; u32 valid = (ath_rc_priv->single_stream ? - rate_table->info[j].valid_single_stream : - rate_table->info[j].valid); + rate_table->info[j].valid_single_stream : + rate_table->info[j].valid); if (((((struct ath_rateset *) - mcs_set)->rs_rates[i] & 0x7F) != - (rate_table->info[j].dot11rate & 0x7F)) || - !WLAN_RC_PHY_HT(phy) || - !WLAN_RC_PHY_HT_VALID(valid, capflag)) + mcs_set)->rs_rates[i] & 0x7F) != + (rate_table->info[j].dot11rate & 0x7F)) || + !WLAN_RC_PHY_HT(phy) || + !WLAN_RC_PHY_HT_VALID(valid, capflag)) continue; if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) @@ -847,9 +848,9 @@ void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp) /* For half and quarter rate channles use different * rate tables */ - if (sc->sc_curchan.channelFlags & CHANNEL_HALF) + if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_HALF) ar5416_sethalf_ratetable(asc); - else if (sc->sc_curchan.channelFlags & CHANNEL_QUARTER) + else if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_QUARTER) ar5416_setquarter_ratetable(asc); else /* full rate */ ar5416_setfull_ratetable(asc); @@ -866,10 +867,10 @@ void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp) } static u8 ath_rc_ratefind_ht(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, - int probe_allowed, int *is_probing, - int is_retry) + struct ath_rate_node *ath_rc_priv, + const struct ath_rate_table *rate_table, + int probe_allowed, int *is_probing, + int is_retry) { u32 dt, best_thruput, this_thruput, now_msec; u8 rate, next_rate, best_rate, maxindex, minindex; @@ -997,8 +998,8 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, rate = rate_ctrl->rate_table_size - 1; ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) || - (rate_table->info[rate].valid_single_stream && - ath_rc_priv->single_stream)); + (rate_table->info[rate].valid_single_stream && + ath_rc_priv->single_stream)); return rate; } @@ -1023,10 +1024,10 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table , } static u8 ath_rc_rate_getidx(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, - u8 rix, u16 stepdown, - u16 min_rate) + struct ath_rate_node *ath_rc_priv, + const struct ath_rate_table *rate_table, + u8 rix, u16 stepdown, + u16 min_rate) { u32 j; u8 nextindex; @@ -1066,8 +1067,8 @@ static void ath_rc_ratefind(struct ath_softc *sc, rate_table = (struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode]; rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, - (rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0, - is_probe, is_retry); + (rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0, + is_probe, is_retry); nrix = rix; if ((rcflag & ATH_RC_PROBE_ALLOWED) && (*is_probe)) { @@ -1099,13 +1100,13 @@ static void ath_rc_ratefind(struct ath_softc *sc, try_num = ((i + 1) == num_rates) ? num_tries - (try_per_rate * i) : try_per_rate ; min_rate = (((i + 1) == num_rates) && - (rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0; + (rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0; nrix = ath_rc_rate_getidx(sc, ath_rc_priv, - rate_table, nrix, 1, min_rate); + rate_table, nrix, 1, min_rate); /* All other rates in the series have RTS enabled */ ath_rc_rate_set_series(rate_table, - &series[i], try_num, nrix, TRUE); + &series[i], try_num, nrix, TRUE); } /* @@ -1124,13 +1125,13 @@ static void ath_rc_ratefind(struct ath_softc *sc, * above conditions. */ if ((sc->sc_curmode == ATH9K_MODE_11NG_HT20) || - (sc->sc_curmode == ATH9K_MODE_11NG_HT40PLUS) || - (sc->sc_curmode == ATH9K_MODE_11NG_HT40MINUS)) { + (sc->sc_curmode == ATH9K_MODE_11NG_HT40PLUS) || + (sc->sc_curmode == ATH9K_MODE_11NG_HT40MINUS)) { u8 dot11rate = rate_table->info[rix].dot11rate; u8 phy = rate_table->info[rix].phy; if (i == 4 && ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) || - (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { + (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { series[3].rix = series[2].rix; series[3].flags = series[2].flags; series[3].max_4ms_framelen = series[2].max_4ms_framelen; @@ -1141,18 +1142,19 @@ static void ath_rc_ratefind(struct ath_softc *sc, /* * Return the Tx rate series. */ -void ath_rate_findrate(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - int num_tries, - int num_rates, - unsigned int rcflag, - struct ath_rc_series series[], - int *is_probe, - int is_retry) +static void ath_rate_findrate(struct ath_softc *sc, + struct ath_rate_node *ath_rc_priv, + int num_tries, + int num_rates, + unsigned int rcflag, + struct ath_rc_series series[], + int *is_probe, + int is_retry) { struct ath_vap *avp = ath_rc_priv->avp; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + if (!num_rates || !num_tries) return; @@ -1174,9 +1176,8 @@ void ath_rate_findrate(struct ath_softc *sc, unsigned int mcs; u8 series_rix = 0; - series[idx].tries = - IEEE80211_RATE_IDX_ENTRY( - avp->av_config.av_fixed_retryset, idx); + series[idx].tries = IEEE80211_RATE_IDX_ENTRY( + avp->av_config.av_fixed_retryset, idx); mcs = IEEE80211_RATE_IDX_ENTRY( avp->av_config.av_fixed_rateset, idx); @@ -1228,7 +1229,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, u32 now_msec = jiffies_to_msecs(jiffies); int state_change = FALSE, rate, count; u8 last_per; - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; + struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table = (struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode]; @@ -1272,14 +1273,14 @@ static void ath_rc_update_ht(struct ath_softc *sc, } else { /* xretries == 2 */ count = sizeof(nretry_to_per_lookup) / - sizeof(nretry_to_per_lookup[0]); + sizeof(nretry_to_per_lookup[0]); if (retries >= count) retries = count - 1; /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ rate_ctrl->state[tx_rate].per = (u8)(rate_ctrl->state[tx_rate].per - - (rate_ctrl->state[tx_rate].per >> 3) + - ((100) >> 3)); + (rate_ctrl->state[tx_rate].per >> 3) + + ((100) >> 3)); } /* xretries == 1 or 2 */ @@ -1295,8 +1296,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (retries >= count) retries = count - 1; if (info_priv->n_bad_frames) { - /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ - /* + /* new_PER = 7/8*old_PER + 1/8*(currentPER) * Assuming that n_frames is not 0. The current PER * from the retries is 100 * retries / (retries+1), * since the first retries attempts failed, and the @@ -1386,7 +1386,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, * rssi_ack values. */ if (tx_rate == rate_ctrl->rate_max_phy && - rate_ctrl->hw_maxretry_pktcnt < 255) { + rate_ctrl->hw_maxretry_pktcnt < 255) { rate_ctrl->hw_maxretry_pktcnt++; } @@ -1418,7 +1418,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Now reduce the current * rssi threshold. */ if ((rssi_ackAvg < rssi_thres + 2) && - (rssi_thres > rssi_ack_vmin)) { + (rssi_thres > rssi_ack_vmin)) { rate_ctrl->state[tx_rate]. rssi_thres--; } @@ -1436,10 +1436,10 @@ static void ath_rc_update_ht(struct ath_softc *sc, * a while (except if we are probing). */ if (rate_ctrl->state[tx_rate].per >= 55 && tx_rate > 0 && - rate_table->info[tx_rate].ratekbps <= - rate_table->info[rate_ctrl->rate_max_phy].ratekbps) { + rate_table->info[tx_rate].ratekbps <= + rate_table->info[rate_ctrl->rate_max_phy].ratekbps) { ath_rc_get_nextlowervalid_txrate(rate_table, rate_ctrl, - (u8) tx_rate, &rate_ctrl->rate_max_phy); + (u8) tx_rate, &rate_ctrl->rate_max_phy); /* Don't probe for a little while. */ rate_ctrl->probe_time = now_msec; @@ -1460,43 +1460,43 @@ static void ath_rc_update_ht(struct ath_softc *sc, break; if (rate_ctrl->state[rate].rssi_thres + - rate_table->info[rate].rssi_ack_deltamin > - rate_ctrl->state[rate+1].rssi_thres) { + rate_table->info[rate].rssi_ack_deltamin > + rate_ctrl->state[rate+1].rssi_thres) { rate_ctrl->state[rate+1].rssi_thres = rate_ctrl->state[rate]. - rssi_thres + + rssi_thres + rate_table->info[rate]. - rssi_ack_deltamin; + rssi_ack_deltamin; } } /* Make sure the rates below this have lower rssi thresholds. */ for (rate = tx_rate - 1; rate >= 0; rate--) { if (rate_table->info[rate].phy != - rate_table->info[tx_rate].phy) + rate_table->info[tx_rate].phy) break; if (rate_ctrl->state[rate].rssi_thres + - rate_table->info[rate].rssi_ack_deltamin > - rate_ctrl->state[rate+1].rssi_thres) { + rate_table->info[rate].rssi_ack_deltamin > + rate_ctrl->state[rate+1].rssi_thres) { if (rate_ctrl->state[rate+1].rssi_thres < - rate_table->info[rate]. - rssi_ack_deltamin) + rate_table->info[rate]. + rssi_ack_deltamin) rate_ctrl->state[rate].rssi_thres = 0; else { rate_ctrl->state[rate].rssi_thres = rate_ctrl->state[rate+1]. - rssi_thres - - rate_table->info[rate]. - rssi_ack_deltamin; + rssi_thres - + rate_table->info[rate]. + rssi_ack_deltamin; } if (rate_ctrl->state[rate].rssi_thres < - rate_table->info[rate]. - rssi_ack_validmin) { + rate_table->info[rate]. + rssi_ack_validmin) { rate_ctrl->state[rate].rssi_thres = rate_table->info[rate]. - rssi_ack_validmin; + rssi_ack_validmin; } } } @@ -1507,11 +1507,11 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (rate_ctrl->state[tx_rate].per < last_per) { for (rate = tx_rate - 1; rate >= 0; rate--) { if (rate_table->info[rate].phy != - rate_table->info[tx_rate].phy) + rate_table->info[tx_rate].phy) break; if (rate_ctrl->state[rate].per > - rate_ctrl->state[rate+1].per) { + rate_ctrl->state[rate+1].per) { rate_ctrl->state[rate].per = rate_ctrl->state[rate+1].per; } @@ -1528,11 +1528,11 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Every so often, we reduce the thresholds and * PER (different for CCK and OFDM). */ if (now_msec - rate_ctrl->rssi_down_time >= - rate_table->rssi_reduce_interval) { + rate_table->rssi_reduce_interval) { for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) { if (rate_ctrl->state[rate].rssi_thres > - rate_table->info[rate].rssi_ack_validmin) + rate_table->info[rate].rssi_ack_validmin) rate_ctrl->state[rate].rssi_thres -= 1; } rate_ctrl->rssi_down_time = now_msec; @@ -1541,7 +1541,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Every so often, we reduce the thresholds * and PER (different for CCK and OFDM). */ if (now_msec - rate_ctrl->per_down_time >= - rate_table->rssi_reduce_interval) { + rate_table->rssi_reduce_interval) { for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) { rate_ctrl->state[rate].per = 7 * rate_ctrl->state[rate].per / 8; @@ -1560,7 +1560,7 @@ static void ath_rc_update(struct ath_softc *sc, struct ath_tx_info_priv *info_priv, int final_ts_idx, int xretries, int long_retry) { - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; + struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table; struct ath_tx_ratectrl *rate_ctrl; struct ath_rc_series rcs[4]; @@ -1637,7 +1637,6 @@ static void ath_rc_update(struct ath_softc *sc, xretries, long_retry); } - /* * Process a tx descriptor for a completed transmit (success or failure). */ @@ -1651,13 +1650,13 @@ static void ath_rate_tx_complete(struct ath_softc *sc, struct ath_vap *avp; avp = rc_priv->avp; - if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) - || info_priv->tx.ts_status & ATH9K_TXERR_FILT) + if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) || + (info_priv->tx.ts_status & ATH9K_TXERR_FILT)) return; if (info_priv->tx.ts_rssi > 0) { ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi, - info_priv->tx.ts_rssi); + info_priv->tx.ts_rssi); } /* @@ -1682,7 +1681,6 @@ static void ath_rate_tx_complete(struct ath_softc *sc, info_priv->tx.ts_longretry); } - /* * Update the SIB's rate control information * @@ -1701,8 +1699,8 @@ static void ath_rc_sib_update(struct ath_softc *sc, struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rateset *rateset = negotiated_rates; u8 *ht_mcs = (u8 *)negotiated_htrates; - struct ath_tx_ratectrl *rate_ctrl = (struct ath_tx_ratectrl *) - (ath_rc_priv); + struct ath_tx_ratectrl *rate_ctrl = + (struct ath_tx_ratectrl *)ath_rc_priv; u8 i, j, k, hi = 0, hthi = 0; rate_table = (struct ath_rate_table *) @@ -1815,19 +1813,18 @@ static void ath_rc_sib_init(struct ath_rate_node *ath_rc_priv) } -static void ath_setup_rates(struct ieee80211_local *local, struct sta_info *sta) +static void ath_setup_rates(struct ath_softc *sc, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, + struct ath_rate_node *rc_priv) { - struct ieee80211_supported_band *sband; - struct ieee80211_hw *hw = local_to_hw(local); - struct ath_softc *sc = hw->priv; - struct ath_rate_node *rc_priv = sta->rate_ctrl_priv; int i, j = 0; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + for (i = 0; i < sband->n_bitrates; i++) { - if (sta->supp_rates[local->hw.conf.channel->band] & BIT(i)) { + if (sta->supp_rates[sband->band] & BIT(i)) { rc_priv->neg_rates.rs_rates[j] = (sband->bitrates[i].bitrate * 2) / 10; j++; @@ -1854,19 +1851,17 @@ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv) } /* Rate Control callbacks */ -static void ath_tx_status(void *priv, struct net_device *dev, +static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { struct ath_softc *sc = priv; struct ath_tx_info_priv *tx_info_priv; struct ath_node *an; - struct sta_info *sta; - struct ieee80211_local *local; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr; __le16 fc; - local = hw_to_local(sc->hw); hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; @@ -1875,8 +1870,7 @@ static void ath_tx_status(void *priv, struct net_device *dev, an = ath_node_find(sc, hdr->addr1); spin_unlock_bh(&sc->node_lock); - sta = sta_info_get(local, hdr->addr1); - if (!an || !sta || !ieee80211_is_data(fc)) { + if (!an || !priv_sta || !ieee80211_is_data(fc)) { if (tx_info->driver_data[0] != NULL) { kfree(tx_info->driver_data[0]); tx_info->driver_data[0] = NULL; @@ -1884,37 +1878,40 @@ static void ath_tx_status(void *priv, struct net_device *dev, return; } if (tx_info->driver_data[0] != NULL) { - ath_rate_tx_complete(sc, an, sta->rate_ctrl_priv, tx_info_priv); + ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv); kfree(tx_info->driver_data[0]); tx_info->driver_data[0] = NULL; } } static void ath_tx_aggr_resp(struct ath_softc *sc, - struct sta_info *sta, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, struct ath_node *an, u8 tidno) { - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_local *local; struct ath_atx_tid *txtid; - struct ieee80211_supported_band *sband; u16 buffersize = 0; int state; - DECLARE_MAC_BUF(mac); + struct sta_info *si; - if (!sc->sc_txaggr) + if (!(sc->sc_flags & SC_OP_TXAGGR)) return; txtid = ATH_AN_2_TID(an, tidno); if (!txtid->paused) return; - local = hw_to_local(sc->hw); - sband = hw->wiphy->bands[hw->conf.channel->band]; + /* + * XXX: This is entirely busted, we aren't supposed to + * access the sta from here because it's internal + * to mac80211, and looking at the state without + * locking is wrong too. + */ + si = container_of(sta, struct sta_info, sta); buffersize = IEEE80211_MIN_AMPDU_BUF << sband->ht_info.ampdu_factor; /* FIXME */ - state = sta->ampdu_mlme.tid_state_tx[tidno]; + state = si->ampdu_mlme.tid_state_tx[tidno]; if (state & HT_ADDBA_RECEIVED_MSK) { txtid->addba_exchangecomplete = 1; @@ -1930,21 +1927,18 @@ static void ath_tx_aggr_resp(struct ath_softc *sc, } } -static void ath_get_rate(void *priv, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) +static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb, struct rate_selection *sel) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct sta_info *sta; - struct ath_softc *sc = (struct ath_softc *)priv; + struct ath_softc *sc = priv; struct ieee80211_hw *hw = sc->hw; struct ath_tx_info_priv *tx_info_priv; - struct ath_rate_node *ath_rc_priv; + struct ath_rate_node *ath_rc_priv = priv_sta; struct ath_node *an; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - int is_probe, chk, ret; + int is_probe = FALSE, chk, ret; s8 lowest_idx; __le16 fc = hdr->frame_control; u8 *qc, tid; @@ -1957,18 +1951,15 @@ static void ath_get_rate(void *priv, struct net_device *dev, ASSERT(tx_info->driver_data[0] != NULL); tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; - sta = sta_info_get(local, hdr->addr1); - lowest_idx = rate_lowest_index(local, sband, sta); + lowest_idx = rate_lowest_index(sband, sta); tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10; /* lowest rate for management and multicast/broadcast frames */ if (!ieee80211_is_data(fc) || - is_multicast_ether_addr(hdr->addr1) || !sta) { + is_multicast_ether_addr(hdr->addr1) || !sta) { sel->rate_idx = lowest_idx; return; } - ath_rc_priv = sta->rate_ctrl_priv; - /* Find tx rate for unicast frames */ ath_rate_findrate(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4, @@ -1977,8 +1968,7 @@ static void ath_get_rate(void *priv, struct net_device *dev, &is_probe, false); if (is_probe) - sel->probe_idx = ((struct ath_tx_ratectrl *) - sta->rate_ctrl_priv)->probe_rate; + sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate; /* Ratecontrol sometimes returns invalid rate index */ if (tx_info_priv->rcs[0].rix != 0xff) @@ -2022,38 +2012,31 @@ static void ath_get_rate(void *priv, struct net_device *dev, __func__, print_mac(mac, hdr->addr1)); } else if (chk == AGGR_EXCHANGE_PROGRESS) - ath_tx_aggr_resp(sc, sta, an, tid); + ath_tx_aggr_resp(sc, sband, sta, an, tid); } } } -static void ath_rate_init(void *priv, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) +static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) { - struct ieee80211_supported_band *sband; - struct ieee80211_hw *hw = local_to_hw(local); - struct ieee80211_conf *conf = &local->hw.conf; - struct ath_softc *sc = hw->priv; + struct ath_softc *sc = priv; + struct ath_rate_node *ath_rc_priv = priv_sta; int i, j = 0; DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - sta->txrate_idx = rate_lowest_index(local, sband, sta); - - ath_setup_rates(local, sta); - if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) { + ath_setup_rates(sc, sband, sta, ath_rc_priv); + if (sc->hw->conf.flags & IEEE80211_CONF_SUPPORT_HT_MODE) { for (i = 0; i < MCS_SET_SIZE; i++) { - if (conf->ht_conf.supp_mcs_set[i/8] & (1<<(i%8))) - ((struct ath_rate_node *) - priv_sta)->neg_ht_rates.rs_rates[j++] = i; + if (sc->hw->conf.ht_conf.supp_mcs_set[i/8] & (1<<(i%8))) + ath_rc_priv->neg_ht_rates.rs_rates[j++] = i; if (j == ATH_RATE_MAX) break; } - ((struct ath_rate_node *)priv_sta)->neg_ht_rates.rs_nrates = j; + ath_rc_priv->neg_ht_rates.rs_nrates = j; } - ath_rc_node_update(hw, priv_sta); + ath_rc_node_update(sc->hw, priv_sta); } static void ath_rate_clear(void *priv) @@ -2061,13 +2044,12 @@ static void ath_rate_clear(void *priv) return; } -static void *ath_rate_alloc(struct ieee80211_local *local) +static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { - struct ieee80211_hw *hw = local_to_hw(local); struct ath_softc *sc = hw->priv; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); - return local->hw.priv; + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + return hw->priv; } static void ath_rate_free(void *priv) @@ -2075,24 +2057,28 @@ static void ath_rate_free(void *priv) return; } -static void *ath_rate_alloc_sta(void *priv, gfp_t gfp) +static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) { struct ath_softc *sc = priv; struct ath_vap *avp = sc->sc_vaps[0]; struct ath_rate_node *rate_priv; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + rate_priv = ath_rate_node_alloc(avp, sc->sc_rc, gfp); if (!rate_priv) { - DPRINTF(sc, ATH_DBG_FATAL, "%s:Unable to allocate" - "private rate control structure", __func__); + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to allocate private rc structure\n", + __func__); return NULL; } ath_rc_sib_init(rate_priv); + return rate_priv; } -static void ath_rate_free_sta(void *priv, void *priv_sta) +static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, + void *priv_sta) { struct ath_rate_node *rate_priv = priv_sta; struct ath_softc *sc = priv; @@ -2111,7 +2097,7 @@ static struct rate_control_ops ath_rate_ops = { .alloc = ath_rate_alloc, .free = ath_rate_free, .alloc_sta = ath_rate_alloc_sta, - .free_sta = ath_rate_free_sta + .free_sta = ath_rate_free_sta, }; int ath_rate_control_register(void) diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 71aef9c7523..b95b41508b9 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -71,9 +71,6 @@ enum ieee80211_fixed_rate_mode { */ #define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8))) -#define SHORT_PRE 1 -#define LONG_PRE 0 - #define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS #define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS #define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI @@ -102,18 +99,18 @@ enum { WLAN_RC_PHY_MAX }; -#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ - || (_phy == WLAN_RC_PHY_HT_40_DS) \ - || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) -#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \ - || (_phy == WLAN_RC_PHY_HT_40_DS) \ - || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) #define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) #define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS) @@ -135,56 +132,59 @@ enum { #define WLAN_RC_SGI_FLAG (0x04) #define WLAN_RC_HT_FLAG (0x08) -/* Index into the rate table */ -#define INIT_RATE_MAX_20 23 -#define INIT_RATE_MAX_40 40 - #define RATE_TABLE_SIZE 64 -/* XXX: Convert to kdoc */ +/** + * struct ath_rate_table - Rate Control table + * @valid: valid for use in rate control + * @valid_single_stream: valid for use in rate control for + * single stream operation + * @phy: CCK/OFDM + * @ratekbps: rate in Kbits per second + * @user_ratekbps: user rate in Kbits per second + * @ratecode: rate that goes into HW descriptors + * @short_preamble: Mask for enabling short preamble in ratecode for CCK + * @dot11rate: value that goes into supported + * rates info element of MLME + * @ctrl_rate: Index of next lower basic rate, used for duration computation + * @max_4ms_framelen: maximum frame length(bytes) for tx duration + * @probe_interval: interval for rate control to probe for other rates + * @rssi_reduce_interval: interval for rate control to reduce rssi + * @initial_ratemax: initial ratemax value used in ath_rc_sib_update() + */ struct ath_rate_table { int rate_cnt; struct { - int valid; /* Valid for use in rate control */ - int valid_single_stream;/* Valid for use in rate control - for single stream operation */ - u8 phy; /* CCK/OFDM/TURBO/XR */ - u32 ratekbps; /* Rate in Kbits per second */ - u32 user_ratekbps; /* User rate in KBits per second */ - u8 ratecode; /* rate that goes into - hw descriptors */ - u8 short_preamble; /* Mask for enabling short preamble - in rate code for CCK */ - u8 dot11rate; /* Value that goes into supported - rates info element of MLME */ - u8 ctrl_rate; /* Index of next lower basic rate, - used for duration computation */ - int8_t rssi_ack_validmin; /* Rate control related */ - int8_t rssi_ack_deltamin; /* Rate control related */ - u8 base_index; /* base rate index */ - u8 cw40index; /* 40cap rate index */ - u8 sgi_index; /* shortgi rate index */ - u8 ht_index; /* shortgi rate index */ - u32 max_4ms_framelen; /* Maximum frame length(bytes) - for 4ms tx duration */ + int valid; + int valid_single_stream; + u8 phy; + u32 ratekbps; + u32 user_ratekbps; + u8 ratecode; + u8 short_preamble; + u8 dot11rate; + u8 ctrl_rate; + int8_t rssi_ack_validmin; + int8_t rssi_ack_deltamin; + u8 base_index; + u8 cw40index; + u8 sgi_index; + u8 ht_index; + u32 max_4ms_framelen; } info[RATE_TABLE_SIZE]; - u32 probe_interval; /* interval for ratectrl to - probe for other rates */ - u32 rssi_reduce_interval; /* interval for ratectrl - to reduce RSSI */ - u8 initial_ratemax; /* the initial ratemax value used - in ath_rc_sib_update() */ + u32 probe_interval; + u32 rssi_reduce_interval; + u8 initial_ratemax; }; #define ATH_RC_PROBE_ALLOWED 0x00000001 #define ATH_RC_MINRATE_LASTRATE 0x00000002 -#define ATH_RC_SHORT_PREAMBLE 0x00000004 struct ath_rc_series { - u8 rix; - u8 tries; - u8 flags; - u32 max_4ms_framelen; + u8 rix; + u8 tries; + u8 flags; + u32 max_4ms_framelen; }; /* rcs_flags definition */ @@ -201,42 +201,56 @@ struct ath_rc_series { #define MAX_TX_RATE_PHY 48 struct ath_tx_ratectrl_state { - int8_t rssi_thres; /* required rssi for this rate (dB) */ - u8 per; /* recent estimate of packet error rate (%) */ + int8_t rssi_thres; /* required rssi for this rate (dB) */ + u8 per; /* recent estimate of packet error rate (%) */ }; +/** + * struct ath_tx_ratectrl - TX Rate control Information + * @state: RC state + * @rssi_last: last ACK rssi + * @rssi_last_lookup: last ACK rssi used for lookup + * @rssi_last_prev: previous last ACK rssi + * @rssi_last_prev2: 2nd previous last ACK rssi + * @rssi_sum_cnt: count of rssi_sum for averaging + * @rssi_sum_rate: rate that we are averaging + * @rssi_sum: running sum of rssi for averaging + * @probe_rate: rate we are probing at + * @rssi_time: msec timestamp for last ack rssi + * @rssi_down_time: msec timestamp for last down step + * @probe_time: msec timestamp for last probe + * @hw_maxretry_pktcnt: num of packets since we got HW max retry error + * @max_valid_rate: maximum number of valid rate + * @per_down_time: msec timestamp for last PER down step + * @valid_phy_ratecnt: valid rate count + * @rate_max_phy: phy index for the max rate + * @probe_interval: interval for ratectrl to probe for other rates + */ struct ath_tx_ratectrl { - struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */ - int8_t rssi_last; /* last ack rssi */ - int8_t rssi_last_lookup; /* last ack rssi used for lookup */ - int8_t rssi_last_prev; /* previous last ack rssi */ - int8_t rssi_last_prev2; /* 2nd previous last ack rssi */ - int32_t rssi_sum_cnt; /* count of rssi_sum for averaging */ - int32_t rssi_sum_rate; /* rate that we are averaging */ - int32_t rssi_sum; /* running sum of rssi for averaging */ - u32 valid_txrate_mask; /* mask of valid rates */ - u8 rate_table_size; /* rate table size */ - u8 rate_max; /* max rate that has recently worked */ - u8 probe_rate; /* rate we are probing at */ - u32 rssi_time; /* msec timestamp for last ack rssi */ - u32 rssi_down_time; /* msec timestamp for last down step */ - u32 probe_time; /* msec timestamp for last probe */ - u8 hw_maxretry_pktcnt; /* num packets since we got - HW max retry error */ - u8 max_valid_rate; /* maximum number of valid rate */ - u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */ - u32 per_down_time; /* msec timstamp for last - PER down step */ + struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; + int8_t rssi_last; + int8_t rssi_last_lookup; + int8_t rssi_last_prev; + int8_t rssi_last_prev2; + int32_t rssi_sum_cnt; + int32_t rssi_sum_rate; + int32_t rssi_sum; + u8 rate_table_size; + u8 probe_rate; + u32 rssi_time; + u32 rssi_down_time; + u32 probe_time; + u8 hw_maxretry_pktcnt; + u8 max_valid_rate; + u8 valid_rate_index[MAX_TX_RATE_TBL]; + u32 per_down_time; /* 11n state */ - u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */ - u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; - u8 rc_phy_mode; - u8 rate_max_phy; /* Phy index for the max rate */ - u32 rate_max_lastused; /* msec timstamp of when we - last used rateMaxPhy */ - u32 probe_interval; /* interval for ratectrl to probe - for other rates */ + u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; + u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; + u8 rc_phy_mode; + u8 rate_max_phy; + u32 probe_interval; }; struct ath_rateset { @@ -248,29 +262,32 @@ struct ath_rateset { struct ath_rate_softc { /* phy tables that contain rate control data */ const void *hw_rate_table[ATH9K_MODE_MAX]; - int fixedrix; /* -1 or index of fixed rate */ + + /* -1 or index of fixed rate */ + int fixedrix; }; /* per-node state */ struct ath_rate_node { - struct ath_tx_ratectrl tx_ratectrl; /* rate control state proper */ - u32 prev_data_rix; /* rate idx of last data frame */ + struct ath_tx_ratectrl tx_ratectrl; - /* map of rate ix -> negotiated rate set ix */ - u8 rixmap[MAX_TX_RATE_TBL]; + /* rate idx of last data frame */ + u32 prev_data_rix; - /* map of ht rate ix -> negotiated rate set ix */ - u8 ht_rixmap[MAX_TX_RATE_TBL]; + /* ht capabilities */ + u8 ht_cap; - u8 ht_cap; /* ht capabilities */ - u8 ant_tx; /* current transmit antenna */ + /* When TRUE, only single stream Tx possible */ + u8 single_stream; - u8 single_stream; /* When TRUE, only single - stream Tx possible */ - struct ath_rateset neg_rates; /* Negotiated rates */ - struct ath_rateset neg_ht_rates; /* Negotiated HT rates */ - struct ath_rate_softc *asc; /* back pointer to atheros softc */ - struct ath_vap *avp; /* back pointer to vap */ + /* Negotiated rates */ + struct ath_rateset neg_rates; + + /* Negotiated HT rates */ + struct ath_rateset neg_ht_rates; + + struct ath_rate_softc *asc; + struct ath_vap *avp; }; /* Driver data of ieee80211_tx_info */ @@ -297,17 +314,10 @@ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv); void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp); /* - * Return the tx rate series. - */ -void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, - int num_tries, int num_rates, - unsigned int rcflag, struct ath_rc_series[], - int *is_probe, int isretry); -/* * Return rate index for given Dot11 Rate. */ u8 ath_rate_findrateix(struct ath_softc *sc, - u8 dot11_rate); + u8 dot11_rate); /* Routines to register/unregister rate control algorithm */ int ath_rate_control_register(void); diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 20ddb7acdb9..4983402af55 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -184,7 +184,7 @@ static int ath_ampdu_input(struct ath_softc *sc, tid = qc[0] & 0xf; } - if (sc->sc_opmode == ATH9K_M_STA) { + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) { /* Drop the frame not belonging to me. */ if (memcmp(hdr->addr1, sc->sc_myaddr, ETH_ALEN)) { dev_kfree_skb(skb); @@ -449,17 +449,16 @@ static int ath_rx_indicate(struct ath_softc *sc, int type; /* indicate frame to the stack, which will free the old skb. */ - type = ath__rx_indicate(sc, skb, status, keyix); + type = _ath_rx_indicate(sc, skb, status, keyix); /* allocate a new skb and queue it to for H/W processing */ nskb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); if (nskb != NULL) { bf->bf_mpdu = nskb; - bf->bf_buf_addr = ath_skb_map_single(sc, - nskb, - PCI_DMA_FROMDEVICE, - /* XXX: Remove get_dma_mem_context() */ - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, + skb_end_pointer(nskb) - nskb->head, + PCI_DMA_FROMDEVICE); + bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; /* queue the new wbuf to H/W */ @@ -505,7 +504,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) do { spin_lock_init(&sc->sc_rxflushlock); - sc->sc_rxflush = 0; + sc->sc_flags &= ~SC_OP_RXFLUSH; spin_lock_init(&sc->sc_rxbuflock); /* @@ -542,9 +541,10 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) } bf->bf_mpdu = skb; - bf->bf_buf_addr = - ath_skb_map_single(sc, skb, PCI_DMA_FROMDEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_FROMDEVICE); + bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; } sc->sc_rxlink = NULL; @@ -598,6 +598,7 @@ void ath_rx_cleanup(struct ath_softc *sc) u32 ath_calcrxfilter(struct ath_softc *sc) { #define RX_FILTER_PRESERVE (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR) + u32 rfilt; rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & RX_FILTER_PRESERVE) @@ -605,25 +606,29 @@ u32 ath_calcrxfilter(struct ath_softc *sc) | ATH9K_RX_FILTER_MCAST; /* If not a STA, enable processing of Probe Requests */ - if (sc->sc_opmode != ATH9K_M_STA) + if (sc->sc_ah->ah_opmode != ATH9K_M_STA) rfilt |= ATH9K_RX_FILTER_PROBEREQ; /* Can't set HOSTAP into promiscous mode */ - if (sc->sc_opmode == ATH9K_M_MONITOR) { + if (((sc->sc_ah->ah_opmode != ATH9K_M_HOSTAP) && + (sc->rx_filter & FIF_PROMISC_IN_BSS)) || + (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR)) { rfilt |= ATH9K_RX_FILTER_PROM; /* ??? To prevent from sending ACK */ rfilt &= ~ATH9K_RX_FILTER_UCAST; } - if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS || - sc->sc_scanning) + if (((sc->sc_ah->ah_opmode == ATH9K_M_STA) && + (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC)) || + (sc->sc_ah->ah_opmode == ATH9K_M_IBSS)) rfilt |= ATH9K_RX_FILTER_BEACON; /* If in HOSTAP mode, want to enable reception of PSPOLL frames & beacon frames */ - if (sc->sc_opmode == ATH9K_M_HOSTAP) + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL); return rfilt; + #undef RX_FILTER_PRESERVE } @@ -703,11 +708,11 @@ void ath_flushrecv(struct ath_softc *sc) * progress (see references to sc_rxflush) */ spin_lock_bh(&sc->sc_rxflushlock); - sc->sc_rxflush = 1; + sc->sc_flags |= SC_OP_RXFLUSH; ath_rx_tasklet(sc, 1); - sc->sc_rxflush = 0; + sc->sc_flags &= ~SC_OP_RXFLUSH; spin_unlock_bh(&sc->sc_rxflushlock); } @@ -720,7 +725,7 @@ int ath_rx_input(struct ath_softc *sc, struct ath_recv_status *rx_status, enum ATH_RX_TYPE *status) { - if (is_ampdu && sc->sc_rxaggr) { + if (is_ampdu && (sc->sc_flags & SC_OP_RXAGGR)) { *status = ATH_RX_CONSUMED; return ath_ampdu_input(sc, an, skb, rx_status); } else { @@ -751,7 +756,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) do { /* If handling rx interrupt and flush is in progress => exit */ - if (sc->sc_rxflush && (flush == 0)) + if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0)) break; spin_lock_bh(&sc->sc_rxbuflock); @@ -887,7 +892,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - memzero(&rx_status, sizeof(struct ath_recv_status)); + memset(&rx_status, 0, sizeof(struct ath_recv_status)); if (ds->ds_rxstat.rs_more) { /* @@ -901,7 +906,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * Enable this if you want to see * error frames in Monitor mode. */ - if (sc->sc_opmode != ATH9K_M_MONITOR) + if (sc->sc_ah->ah_opmode != ATH9K_M_MONITOR) goto rx_next; #endif /* fall thru for monitor mode handling... */ @@ -946,7 +951,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * decryption and MIC failures. For monitor mode, * we also ignore the CRC error. */ - if (sc->sc_opmode == ATH9K_M_MONITOR) { + if (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR) { if (ds->ds_rxstat.rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) @@ -994,20 +999,11 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) rx_status.flags |= ATH_RX_SHORT_GI; } - /* sc->sc_noise_floor is only available when the station + /* sc_noise_floor is only available when the station attaches to an AP, so we use a default value if we are not yet attached. */ - - /* XXX we should use either sc->sc_noise_floor or - * ath_hal_getChanNoise(ah, &sc->sc_curchan) - * to calculate the noise floor. - * However, the value returned by ath_hal_getChanNoise - * seems to be incorrect (-31dBm on the last test), - * so we will use a hard-coded value until we - * figure out what is going on. - */ rx_status.abs_rssi = - ds->ds_rxstat.rs_rssi + ATH_DEFAULT_NOISE_FLOOR; + ds->ds_rxstat.rs_rssi + sc->sc_ani.sc_noise_floor; pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, @@ -1090,7 +1086,7 @@ rx_next: "%s: Reset rx chain mask. " "Do internal reset\n", __func__); ASSERT(flush == 0); - ath_internal_reset(sc); + ath_reset(sc, false); } return 0; @@ -1128,7 +1124,7 @@ int ath_rx_aggr_start(struct ath_softc *sc, rxtid = &an->an_aggr.rx.tid[tid]; spin_lock_bh(&rxtid->tidlock); - if (sc->sc_rxaggr) { + if (sc->sc_flags & SC_OP_RXAGGR) { /* Allow aggregation reception * Adjust rx BA window size. Peer might indicate a * zero buffer size for a _dont_care_ condition. @@ -1161,7 +1157,7 @@ int ath_rx_aggr_start(struct ath_softc *sc, } else { /* Ensure the memory is zeroed out (all internal * pointers are null) */ - memzero(rxtid->rxbuf, ATH_TID_MAX_BUFS * + memset(rxtid->rxbuf, 0, ATH_TID_MAX_BUFS * sizeof(struct ath_rxbuf)); DPRINTF(sc, ATH_DBG_AGGR, "%s: Allocated @%p\n", __func__, rxtid->rxbuf); @@ -1228,7 +1224,7 @@ void ath_rx_aggr_teardown(struct ath_softc *sc, void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_rxaggr) { + if (sc->sc_flags & SC_OP_RXAGGR) { struct ath_arx_tid *rxtid; int tidno; @@ -1260,7 +1256,7 @@ void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an) void ath_rx_node_cleanup(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_rxaggr) { + if (sc->sc_flags & SC_OP_RXAGGR) { struct ath_arx_tid *rxtid; int tidno, i; @@ -1293,27 +1289,3 @@ void ath_rx_node_free(struct ath_softc *sc, struct ath_node *an) { ath_rx_node_cleanup(sc, an); } - -dma_addr_t ath_skb_map_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa) -{ - /* - * NB: do NOT use skb->len, which is 0 on initialization. - * Use skb's entire data area instead. - */ - *pa = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, direction); - return *pa; -} - -void ath_skb_unmap_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa) -{ - /* Unmap skb's entire data area */ - pci_unmap_single(sc->pdev, *pa, - skb_end_pointer(skb) - skb->head, direction); -} diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h index 42b0890a468..60617ae6620 100644 --- a/drivers/net/wireless/ath9k/reg.h +++ b/drivers/net/wireless/ath9k/reg.h @@ -899,12 +899,6 @@ enum { #define AR_GPIO_OUTPUT_MUX2 0x4064 #define AR_GPIO_OUTPUT_MUX3 0x4068 -#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0 -#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1 -#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED 2 -#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED 5 -#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED 6 - #define AR_INPUT_STATE 0x406c #define AR_EEPROM_STATUS_DATA 0x407c diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 550129f717e..3a4757942b3 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -60,79 +60,6 @@ static u32 bits_per_symbol[][2] = { #define IS_HT_RATE(_rate) ((_rate) & 0x80) /* - * Insert a chain of ath_buf (descriptors) on a multicast txq - * but do NOT start tx DMA on this queue. - * NB: must be called with txq lock held - */ - -static void ath_tx_mcastqaddbuf(struct ath_softc *sc, - struct ath_txq *txq, - struct list_head *head) -{ - struct ath_hal *ah = sc->sc_ah; - struct ath_buf *bf; - - if (list_empty(head)) - return; - - /* - * Insert the frame on the outbound list and - * pass it on to the hardware. - */ - bf = list_first_entry(head, struct ath_buf, list); - - /* - * The CAB queue is started from the SWBA handler since - * frames only go out on DTIM and to avoid possible races. - */ - ath9k_hw_set_interrupts(ah, 0); - - /* - * If there is anything in the mcastq, we want to set - * the "more data" bit in the last item in the queue to - * indicate that there is "more data". It makes sense to add - * it here since you are *always* going to have - * more data when adding to this queue, no matter where - * you call from. - */ - - if (txq->axq_depth) { - struct ath_buf *lbf; - struct ieee80211_hdr *hdr; - - /* - * Add the "more data flag" to the last frame - */ - - lbf = list_entry(txq->axq_q.prev, struct ath_buf, list); - hdr = (struct ieee80211_hdr *) - ((struct sk_buff *)(lbf->bf_mpdu))->data; - hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } - - /* - * Now, concat the frame onto the queue - */ - list_splice_tail_init(head, &txq->axq_q); - txq->axq_depth++; - txq->axq_totalqueued++; - txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list); - - DPRINTF(sc, ATH_DBG_QUEUE, - "%s: txq depth = %d\n", __func__, txq->axq_depth); - if (txq->axq_link != NULL) { - *txq->axq_link = bf->bf_daddr; - DPRINTF(sc, ATH_DBG_XMIT, - "%s: link[%u](%p)=%llx (%p)\n", - __func__, - txq->axq_qnum, txq->axq_link, - ito64(bf->bf_daddr), bf->bf_desc); - } - txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link); - ath9k_hw_set_interrupts(ah, sc->sc_imask); -} - -/* * Insert a chain of ath_buf (descriptors) on a txq and * assume the descriptors are already chained together by caller. * NB: must be called with txq lock held @@ -277,8 +204,6 @@ static int ath_tx_prepare(struct ath_softc *sc, __le16 fc; u8 *qc; - memset(txctl, 0, sizeof(struct ath_tx_control)); - txctl->dev = sc; hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -302,7 +227,6 @@ static int ath_tx_prepare(struct ath_softc *sc, } txctl->if_id = 0; - txctl->nextfraglen = 0; txctl->frmlen = skb->len + FCS_LEN - (hdrlen & 3); txctl->txpower = MAX_RATE_POWER; /* FIXME */ @@ -313,13 +237,13 @@ static int ath_tx_prepare(struct ath_softc *sc, if (tx_info->control.hw_key) { txctl->keyix = tx_info->control.hw_key->hw_key_idx; - txctl->frmlen += tx_info->control.icv_len; + txctl->frmlen += tx_info->control.hw_key->icv_len; - if (sc->sc_keytype == ATH9K_CIPHER_WEP) + if (tx_info->control.hw_key->alg == ALG_WEP) txctl->keytype = ATH9K_KEY_TYPE_WEP; - else if (sc->sc_keytype == ATH9K_CIPHER_TKIP) + else if (tx_info->control.hw_key->alg == ALG_TKIP) txctl->keytype = ATH9K_KEY_TYPE_TKIP; - else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM) + else if (tx_info->control.hw_key->alg == ALG_CCMP) txctl->keytype = ATH9K_KEY_TYPE_AES; } @@ -329,12 +253,18 @@ static int ath_tx_prepare(struct ath_softc *sc, /* Fill qnum */ - txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); - txq = &sc->sc_txq[txctl->qnum]; + if (unlikely(txctl->flags & ATH9K_TXDESC_CAB)) { + txctl->qnum = 0; + txq = sc->sc_cabq; + } else { + txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); + txq = &sc->sc_txq[txctl->qnum]; + } spin_lock_bh(&txq->axq_lock); /* Try to avoid running out of descriptors */ - if (txq->axq_depth >= (ATH_TXBUF - 20)) { + if (txq->axq_depth >= (ATH_TXBUF - 20) && + !(txctl->flags & ATH9K_TXDESC_CAB)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: TX queue: %d is full, depth: %d\n", __func__, @@ -354,7 +284,7 @@ static int ath_tx_prepare(struct ath_softc *sc, /* Fill flags */ - txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ + txctl->flags |= ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) txctl->flags |= ATH9K_TXDESC_NOACK; @@ -392,7 +322,7 @@ static int ath_tx_prepare(struct ath_softc *sc, * incremented by the fragmentation routine. */ if (likely(!(txctl->flags & ATH9K_TXDESC_FRAG_IS_ON)) && - txctl->ht && sc->sc_txaggr) { + txctl->ht && (sc->sc_flags & SC_OP_TXAGGR)) { struct ath_atx_tid *tid; tid = ATH_AN_2_TID(txctl->an, txctl->tidno); @@ -413,50 +343,18 @@ static int ath_tx_prepare(struct ath_softc *sc, } rix = rcs[0].rix; - /* - * Calculate duration. This logically belongs in the 802.11 - * layer but it lacks sufficient information to calculate it. - */ - if ((txctl->flags & ATH9K_TXDESC_NOACK) == 0 && !ieee80211_is_ctl(fc)) { - u16 dur; + if (ieee80211_has_morefrags(fc) || + (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { /* - * XXX not right with fragmentation. - */ - if (sc->sc_flags & ATH_PREAMBLE_SHORT) - dur = rt->info[rix].spAckDuration; - else - dur = rt->info[rix].lpAckDuration; - - if (le16_to_cpu(hdr->frame_control) & - IEEE80211_FCTL_MOREFRAGS) { - dur += dur; /* Add additional 'SIFS + ACK' */ - - /* - ** Compute size of next fragment in order to compute - ** durations needed to update NAV. - ** The last fragment uses the ACK duration only. - ** Add time for next fragment. - */ - dur += ath9k_hw_computetxtime(sc->sc_ah, rt, - txctl->nextfraglen, - rix, sc->sc_flags & ATH_PREAMBLE_SHORT); - } - - if (ieee80211_has_morefrags(fc) || - (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { - /* - ** Force hardware to use computed duration for next - ** fragment by disabling multi-rate retry, which - ** updates duration based on the multi-rate - ** duration table. - */ - rcs[1].tries = rcs[2].tries = rcs[3].tries = 0; - rcs[1].rix = rcs[2].rix = rcs[3].rix = 0; - /* reset tries but keep rate index */ - rcs[0].tries = ATH_TXMAXTRY; - } - - hdr->duration_id = cpu_to_le16(dur); + ** Force hardware to use computed duration for next + ** fragment by disabling multi-rate retry, which + ** updates duration based on the multi-rate + ** duration table. + */ + rcs[1].tries = rcs[2].tries = rcs[3].tries = 0; + rcs[1].rix = rcs[2].rix = rcs[3].rix = 0; + /* reset tries but keep rate index */ + rcs[0].tries = ATH_TXMAXTRY; } /* @@ -484,12 +382,8 @@ static int ath_tx_prepare(struct ath_softc *sc, if (is_multicast_ether_addr(hdr->addr1)) { antenna = sc->sc_mcastantenna + 1; sc->sc_mcastantenna = (sc->sc_mcastantenna + 1) & 0x1; - } else - antenna = sc->sc_txantenna; + } -#ifdef USE_LEGACY_HAL - txctl->antenna = antenna; -#endif return 0; } @@ -502,7 +396,6 @@ static void ath_tx_complete_buf(struct ath_softc *sc, { struct sk_buff *skb = bf->bf_mpdu; struct ath_xmit_status tx_status; - dma_addr_t *pa; /* * Set retry information. @@ -518,13 +411,12 @@ static void ath_tx_complete_buf(struct ath_softc *sc, if (!txok) { tx_status.flags |= ATH_TX_ERROR; - if (bf->bf_isxretried) + if (bf_isxretried(bf)) tx_status.flags |= ATH_TX_XRETRY; } /* Unmap this frame */ - pa = get_dma_mem_context(bf, bf_dmacontext); pci_unmap_single(sc->pdev, - *pa, + bf->bf_dmacontext, skb->len, PCI_DMA_TODEVICE); /* complete this frame */ @@ -629,7 +521,7 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, if (isnodegone || ds->ds_txstat.ts_flags == ATH9K_TX_SW_ABORTED) return 0; - isaggr = bf->bf_isaggr; + isaggr = bf_isaggr(bf); if (isaggr) { seq_st = ATH_DS_BA_SEQ(ds); memcpy(ba, ATH_DS_BA_BITMAP(ds), WME_BA_BMP_SIZE >> 3); @@ -651,7 +543,7 @@ static void ath_tx_set_retry(struct ath_softc *sc, struct ath_buf *bf) struct sk_buff *skb; struct ieee80211_hdr *hdr; - bf->bf_isretried = 1; + bf->bf_state.bf_type |= BUF_RETRY; bf->bf_retries++; skb = bf->bf_mpdu; @@ -698,7 +590,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rc; int streams, pktlen; - pktlen = bf->bf_isaggr ? bf->bf_al : bf->bf_frmlen; + pktlen = bf_isaggr(bf) ? bf->bf_al : bf->bf_frmlen; rc = rt->info[rix].rateCode; /* @@ -742,7 +634,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) int i, flags, rtsctsena = 0, dynamic_mimops = 0; u32 ctsduration = 0; u8 rix = 0, cix, ctsrate = 0; - u32 aggr_limit_with_rts = sc->sc_rtsaggrlimit; + u32 aggr_limit_with_rts = ah->ah_caps.rts_aggr_limit; struct ath_node *an = (struct ath_node *) bf->bf_node; /* @@ -781,7 +673,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * let rate series flags determine which rates will actually * use RTS. */ - if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf->bf_isdata) { + if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf_isdata(bf)) { BUG_ON(!an); /* * 802.11g protection not needed, use our default behavior @@ -793,7 +685,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * and the second aggregate should have any protection at all. */ if (an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) { - if (!bf->bf_aggrburst) { + if (!bf_isaggrburst(bf)) { flags = ATH9K_TXDESC_RTSENA; dynamic_mimops = 1; } else { @@ -806,7 +698,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * Set protection if aggregate protection on */ if (sc->sc_config.ath_aggr_prot && - (!bf->bf_isaggr || (bf->bf_isaggr && bf->bf_al < 8192))) { + (!bf_isaggr(bf) || (bf_isaggr(bf) && bf->bf_al < 8192))) { flags = ATH9K_TXDESC_RTSENA; cix = rt->info[sc->sc_protrix].controlRate; rtsctsena = 1; @@ -815,7 +707,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) /* * For AR5416 - RTS cannot be followed by a frame larger than 8K. */ - if (bf->bf_isaggr && (bf->bf_al > aggr_limit_with_rts)) { + if (bf_isaggr(bf) && (bf->bf_al > aggr_limit_with_rts)) { /* * Ensure that in the case of SM Dynamic power save * while we are bursting the second aggregate the @@ -832,12 +724,12 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) /* NB: cix is set above where RTS/CTS is enabled */ BUG_ON(cix == 0xff); ctsrate = rt->info[cix].rateCode | - (bf->bf_shpreamble ? rt->info[cix].shortPreamble : 0); + (bf_isshpreamble(bf) ? rt->info[cix].shortPreamble : 0); /* * Setup HAL rate series */ - memzero(series, sizeof(struct ath9k_11n_rate_series) * 4); + memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); for (i = 0; i < 4; i++) { if (!bf->bf_rcs[i].tries) @@ -846,7 +738,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) rix = bf->bf_rcs[i].rix; series[i].Rate = rt->info[rix].rateCode | - (bf->bf_shpreamble ? rt->info[rix].shortPreamble : 0); + (bf_isshpreamble(bf) ? rt->info[rix].shortPreamble : 0); series[i].Tries = bf->bf_rcs[i].tries; @@ -862,7 +754,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) sc, rix, bf, (bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) != 0, (bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG), - bf->bf_shpreamble); + bf_isshpreamble(bf)); if ((an->an_smmode == ATH_SM_PWRSAV_STATIC) && (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG) == 0) { @@ -875,7 +767,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) */ series[i].ChSel = sc->sc_tx_chainmask; } else { - if (bf->bf_ht) + if (bf_isht(bf)) series[i].ChSel = ath_chainmask_sel_logic(sc, an); else @@ -908,7 +800,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * use the precalculated ACK durations. */ if (flags & ATH9K_TXDESC_RTSENA) { /* SIFS + CTS */ - ctsduration += bf->bf_shpreamble ? + ctsduration += bf_isshpreamble(bf) ? rt->info[cix].spAckDuration : rt->info[cix].lpAckDuration; } @@ -916,7 +808,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) ctsduration += series[0].PktDuration; if ((bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { /* SIFS + ACK */ - ctsduration += bf->bf_shpreamble ? + ctsduration += bf_isshpreamble(bf) ? rt->info[rix].spAckDuration : rt->info[rix].lpAckDuration; } @@ -925,17 +817,17 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * Disable multi-rate retry when using RTS/CTS by clearing * series 1, 2 and 3. */ - memzero(&series[1], sizeof(struct ath9k_11n_rate_series) * 3); + memset(&series[1], 0, sizeof(struct ath9k_11n_rate_series) * 3); } /* * set dur_update_en for l-sig computation except for PS-Poll frames */ ath9k_hw_set11n_ratescenario(ah, ds, lastds, - !bf->bf_ispspoll, - ctsrate, - ctsduration, - series, 4, flags); + !bf_ispspoll(bf), + ctsrate, + ctsduration, + series, 4, flags); if (sc->sc_config.ath_aggr_prot && flags) ath9k_hw_set11n_burstduration(ah, ds, 8192); } @@ -958,7 +850,7 @@ static int ath_tx_send_normal(struct ath_softc *sc, BUG_ON(list_empty(bf_head)); bf = list_first_entry(bf_head, struct ath_buf, list); - bf->bf_isampdu = 0; /* regular HT frame */ + bf->bf_state.bf_type &= ~BUF_AMPDU; /* regular HT frame */ skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); @@ -998,7 +890,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) while (!list_empty(&tid->buf_q)) { bf = list_first_entry(&tid->buf_q, struct ath_buf, list); - ASSERT(!bf->bf_isretried); + ASSERT(!bf_isretried(bf)); list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); ath_tx_send_normal(sc, txq, tid, &bf_head); } @@ -1025,7 +917,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, int isaggr, txfail, txpending, sendbar = 0, needreset = 0; int isnodegone = (an->an_flags & ATH_NODE_CLEAN); - isaggr = bf->bf_isaggr; + isaggr = bf_isaggr(bf); if (isaggr) { if (txok) { if (ATH_DS_TX_BA(ds)) { @@ -1038,7 +930,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, ATH_DS_BA_BITMAP(ds), WME_BA_BMP_SIZE >> 3); } else { - memzero(ba, WME_BA_BMP_SIZE >> 3); + memset(ba, 0, WME_BA_BMP_SIZE >> 3); /* * AR5416 can become deaf/mute when BA @@ -1047,11 +939,11 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, * when perform internal reset in this routine. * Only enable reset in STA mode for now. */ - if (sc->sc_opmode == ATH9K_M_STA) + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) needreset = 1; } } else { - memzero(ba, WME_BA_BMP_SIZE >> 3); + memset(ba, 0, WME_BA_BMP_SIZE >> 3); } } @@ -1075,7 +967,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, ath_tx_set_retry(sc, bf); txpending = 1; } else { - bf->bf_isxretried = 1; + bf->bf_state.bf_type |= BUF_XRETRY; txfail = 1; sendbar = 1; } @@ -1175,11 +1067,8 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, tbf->bf_lastfrm->bf_desc); /* copy the DMA context */ - copy_dma_mem_context( - get_dma_mem_context(tbf, - bf_dmacontext), - get_dma_mem_context(bf_last, - bf_dmacontext)); + tbf->bf_dmacontext = + bf_last->bf_dmacontext; } list_add_tail(&tbf->list, &bf_head); } else { @@ -1188,7 +1077,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, * software retry */ ath9k_hw_cleartxdesc(sc->sc_ah, - bf->bf_lastfrm->bf_desc); + bf->bf_lastfrm->bf_desc); } /* @@ -1242,7 +1131,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, } if (needreset) - ath_internal_reset(sc); + ath_reset(sc, false); return; } @@ -1331,7 +1220,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) txq->axq_depth--; - if (bf->bf_isaggr) + if (bf_isaggr(bf)) txq->axq_aggr_depth--; txok = (ds->ds_txstat.ts_status == 0); @@ -1345,14 +1234,14 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) spin_unlock_bh(&sc->sc_txbuflock); } - if (!bf->bf_isampdu) { + if (!bf_isampdu(bf)) { /* * This frame is sent out as a single frame. * Use hardware retry status for this frame. */ bf->bf_retries = ds->ds_txstat.ts_longretry; if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY) - bf->bf_isxretried = 1; + bf->bf_state.bf_type |= BUF_XRETRY; nbad = 0; } else { nbad = ath_tx_num_badfrms(sc, bf, txok); @@ -1368,7 +1257,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) if (ds->ds_txstat.ts_status == 0) nacked++; - if (bf->bf_isdata) { + if (bf_isdata(bf)) { if (isrifs) tmp_ds = bf->bf_rifslast->bf_desc; else @@ -1384,7 +1273,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) /* * Complete this transmit unit */ - if (bf->bf_isampdu) + if (bf_isampdu(bf)) ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, txok); else ath_tx_complete_buf(sc, bf, &bf_head, txok, 0); @@ -1406,7 +1295,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) /* * schedule any pending packets if aggregation is enabled */ - if (sc->sc_txaggr) + if (sc->sc_flags & SC_OP_TXAGGR) ath_txq_schedule(sc, txq); spin_unlock_bh(&txq->axq_lock); } @@ -1430,10 +1319,9 @@ static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx) struct ath_hal *ah = sc->sc_ah; int i; int npend = 0; - enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); /* XXX return value */ - if (!sc->sc_invalid) { + if (!(sc->sc_flags & SC_OP_INVALID)) { for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i)) { ath_tx_stopdma(sc, &sc->sc_txq[i]); @@ -1454,10 +1342,11 @@ static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx) "%s: Unable to stop TxDMA. Reset HAL!\n", __func__); spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, - &sc->sc_curchan, ht_macmode, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, true, &status)) { + if (!ath9k_hw_reset(ah, + sc->sc_ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, true, &status)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: unable to reset hardware; hal status %u\n", @@ -1481,7 +1370,7 @@ static void ath_tx_addto_baw(struct ath_softc *sc, { int index, cindex; - if (bf->bf_isretried) + if (bf_isretried(bf)) return; index = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno); @@ -1516,7 +1405,7 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, BUG_ON(list_empty(bf_head)); bf = list_first_entry(bf_head, struct ath_buf, list); - bf->bf_isampdu = 1; + bf->bf_state.bf_type |= BUF_AMPDU; bf->bf_seqno = txctl->seqno; /* save seqno and tidno in buffer */ bf->bf_tidno = txctl->tidno; @@ -1860,7 +1749,7 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, if (bf->bf_nframes == 1) { ASSERT(bf->bf_lastfrm == bf_last); - bf->bf_isaggr = 0; + bf->bf_state.bf_type &= ~BUF_AGGR; /* * clear aggr bits for every descriptor * XXX TODO: is there a way to optimize it? @@ -1877,7 +1766,7 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, /* * setup first desc with rate and aggr info */ - bf->bf_isaggr = 1; + bf->bf_state.bf_type |= BUF_AGGR; ath_buf_set_rate(sc, bf); ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, bf->bf_al); @@ -1925,7 +1814,7 @@ static void ath_tid_drain(struct ath_softc *sc, list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); /* update baw for software retried frame */ - if (bf->bf_isretried) + if (bf_isretried(bf)) ath_tx_update_baw(sc, tid, bf->bf_seqno); /* @@ -1990,13 +1879,18 @@ static int ath_tx_start_dma(struct ath_softc *sc, struct list_head bf_head; struct ath_desc *ds; struct ath_hal *ah = sc->sc_ah; - struct ath_txq *txq = &sc->sc_txq[txctl->qnum]; + struct ath_txq *txq; struct ath_tx_info_priv *tx_info_priv; struct ath_rc_series *rcs; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); __le16 fc = hdr->frame_control; + if (unlikely(txctl->flags & ATH9K_TXDESC_CAB)) + txq = sc->sc_cabq; + else + txq = &sc->sc_txq[txctl->qnum]; + /* For each sglist entry, allocate an ath_buf for DMA */ INIT_LIST_HEAD(&bf_head); spin_lock_bh(&sc->sc_txbuflock); @@ -2014,11 +1908,21 @@ static int ath_tx_start_dma(struct ath_softc *sc, /* set up this buffer */ ATH_TXBUF_RESET(bf); bf->bf_frmlen = txctl->frmlen; - bf->bf_isdata = ieee80211_is_data(fc); - bf->bf_isbar = ieee80211_is_back_req(fc); - bf->bf_ispspoll = ieee80211_is_pspoll(fc); + + ieee80211_is_data(fc) ? + (bf->bf_state.bf_type |= BUF_DATA) : + (bf->bf_state.bf_type &= ~BUF_DATA); + ieee80211_is_back_req(fc) ? + (bf->bf_state.bf_type |= BUF_BAR) : + (bf->bf_state.bf_type &= ~BUF_BAR); + ieee80211_is_pspoll(fc) ? + (bf->bf_state.bf_type |= BUF_PSPOLL) : + (bf->bf_state.bf_type &= ~BUF_PSPOLL); + (sc->sc_flags & SC_OP_PREAMBLE_SHORT) ? + (bf->bf_state.bf_type |= BUF_SHORT_PREAMBLE) : + (bf->bf_state.bf_type &= ~BUF_SHORT_PREAMBLE); + bf->bf_flags = txctl->flags; - bf->bf_shpreamble = sc->sc_flags & ATH_PREAMBLE_SHORT; bf->bf_keytype = txctl->keytype; tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; rcs = tx_info_priv->rcs; @@ -2038,8 +1942,7 @@ static int ath_tx_start_dma(struct ath_softc *sc, /* * Save the DMA context in the first ath_buf */ - copy_dma_mem_context(get_dma_mem_context(bf, bf_dmacontext), - get_dma_mem_context(txctl, dmacontext)); + bf->bf_dmacontext = txctl->dmacontext; /* * Formulate first tx descriptor with tx controls. @@ -2060,11 +1963,13 @@ static int ath_tx_start_dma(struct ath_softc *sc, ds); /* first descriptor */ bf->bf_lastfrm = bf; - bf->bf_ht = txctl->ht; + (txctl->ht) ? + (bf->bf_state.bf_type |= BUF_HT) : + (bf->bf_state.bf_type &= ~BUF_HT); spin_lock_bh(&txq->axq_lock); - if (txctl->ht && sc->sc_txaggr) { + if (txctl->ht && (sc->sc_flags & SC_OP_TXAGGR)) { struct ath_atx_tid *tid = ATH_AN_2_TID(an, txctl->tidno); if (ath_aggr_query(sc, an, txctl->tidno)) { /* @@ -2090,27 +1995,7 @@ static int ath_tx_start_dma(struct ath_softc *sc, bf->bf_tidno = txctl->tidno; } - if (is_multicast_ether_addr(hdr->addr1)) { - struct ath_vap *avp = sc->sc_vaps[txctl->if_id]; - - /* - * When servicing one or more stations in power-save - * mode (or) if there is some mcast data waiting on - * mcast queue (to prevent out of order delivery of - * mcast,bcast packets) multicast frames must be - * buffered until after the beacon. We use the private - * mcast queue for that. - */ - /* XXX? more bit in 802.11 frame header */ - spin_lock_bh(&avp->av_mcastq.axq_lock); - if (txctl->ps || avp->av_mcastq.axq_depth) - ath_tx_mcastqaddbuf(sc, - &avp->av_mcastq, &bf_head); - else - ath_tx_txqaddbuf(sc, txq, &bf_head); - spin_unlock_bh(&avp->av_mcastq.axq_lock); - } else - ath_tx_txqaddbuf(sc, txq, &bf_head); + ath_tx_txqaddbuf(sc, txq, &bf_head); } spin_unlock_bh(&txq->axq_lock); return 0; @@ -2118,30 +2003,31 @@ static int ath_tx_start_dma(struct ath_softc *sc, static void xmit_map_sg(struct ath_softc *sc, struct sk_buff *skb, - dma_addr_t *pa, struct ath_tx_control *txctl) { struct ath_xmit_status tx_status; struct ath_atx_tid *tid; struct scatterlist sg; - *pa = pci_map_single(sc->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + txctl->dmacontext = pci_map_single(sc->pdev, skb->data, + skb->len, PCI_DMA_TODEVICE); /* setup S/G list */ memset(&sg, 0, sizeof(struct scatterlist)); - sg_dma_address(&sg) = *pa; + sg_dma_address(&sg) = txctl->dmacontext; sg_dma_len(&sg) = skb->len; if (ath_tx_start_dma(sc, skb, &sg, 1, txctl) != 0) { /* * We have to do drop frame here. */ - pci_unmap_single(sc->pdev, *pa, skb->len, PCI_DMA_TODEVICE); + pci_unmap_single(sc->pdev, txctl->dmacontext, + skb->len, PCI_DMA_TODEVICE); tx_status.retries = 0; tx_status.flags = ATH_TX_ERROR; - if (txctl->ht && sc->sc_txaggr) { + if (txctl->ht && (sc->sc_flags & SC_OP_TXAGGR)) { /* Reclaim the seqno. */ tid = ATH_AN_2_TID((struct ath_node *) txctl->an, txctl->tidno); @@ -2162,7 +2048,7 @@ int ath_tx_init(struct ath_softc *sc, int nbufs) /* Setup tx descriptors */ error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf, - "tx", nbufs * ATH_FRAG_PER_MSDU, ATH_TXDESC); + "tx", nbufs, 1); if (error != 0) { DPRINTF(sc, ATH_DBG_FATAL, "%s: failed to allocate tx descriptors: %d\n", @@ -2212,7 +2098,7 @@ struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) struct ath9k_tx_queue_info qi; int qnum; - memzero(&qi, sizeof(qi)); + memset(&qi, 0, sizeof(qi)); qi.tqi_subtype = subtype; qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT; qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT; @@ -2403,6 +2289,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) struct ath_tx_control txctl; int error = 0; + memset(&txctl, 0, sizeof(struct ath_tx_control)); error = ath_tx_prepare(sc, skb, &txctl); if (error == 0) /* @@ -2410,9 +2297,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) * ath_tx_start_dma() will be called either synchronously * or asynchrounsly once DMA is complete. */ - xmit_map_sg(sc, skb, - get_dma_mem_context(&txctl, dmacontext), - &txctl); + xmit_map_sg(sc, skb, &txctl); else ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE); @@ -2424,8 +2309,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) void ath_tx_tasklet(struct ath_softc *sc) { - u64 tsf = ath9k_hw_gettsf64(sc->sc_ah); - int i, nacked = 0; + int i; u32 qcumask = ((1 << ATH9K_NUM_TX_QUEUES) - 1); ath9k_hw_gettxintrtxqs(sc->sc_ah, &qcumask); @@ -2435,10 +2319,8 @@ void ath_tx_tasklet(struct ath_softc *sc) */ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i) && (qcumask & (1 << i))) - nacked += ath_tx_processq(sc, &sc->sc_txq[i]); + ath_tx_processq(sc, &sc->sc_txq[i]); } - if (nacked) - sc->sc_lastrx = tsf; } void ath_tx_draintxq(struct ath_softc *sc, @@ -2486,14 +2368,14 @@ void ath_tx_draintxq(struct ath_softc *sc, spin_unlock_bh(&txq->axq_lock); - if (bf->bf_isampdu) + if (bf_isampdu(bf)) ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, 0); else ath_tx_complete_buf(sc, bf, &bf_head, 0, 0); } /* flush any pending frames if aggregation is enabled */ - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { if (!retry_tx) { spin_lock_bh(&txq->axq_lock); ath_txq_drain_pending_buffers(sc, txq, @@ -2509,7 +2391,7 @@ void ath_draintxq(struct ath_softc *sc, bool retry_tx) { /* stop beacon queue. The beacon will be freed when * we go to INIT state */ - if (!sc->sc_invalid) { + if (!(sc->sc_flags & SC_OP_INVALID)) { (void) ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); DPRINTF(sc, ATH_DBG_XMIT, "%s: beacon queue %x\n", __func__, ath9k_hw_gettxbuf(sc->sc_ah, sc->sc_bhalq)); @@ -2536,7 +2418,7 @@ enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc, struct ath_atx_tid *txtid; DECLARE_MAC_BUF(mac); - if (!sc->sc_txaggr) + if (!(sc->sc_flags & SC_OP_TXAGGR)) return AGGR_NOT_REQUIRED; /* ADDBA exchange must be completed before sending aggregates */ @@ -2583,7 +2465,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, return -1; } - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { txtid = ATH_AN_2_TID(an, tid); txtid->addba_exchangeinprogress = 1; ath_tx_pause_tid(sc, txtid); @@ -2647,7 +2529,7 @@ void ath_tx_aggr_teardown(struct ath_softc *sc, spin_lock_bh(&txq->axq_lock); while (!list_empty(&txtid->buf_q)) { bf = list_first_entry(&txtid->buf_q, struct ath_buf, list); - if (!bf->bf_isretried) { + if (!bf_isretried(bf)) { /* * NB: it's based on the assumption that * software retried frame will always stay @@ -2743,7 +2625,7 @@ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq) void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { struct ath_atx_tid *tid; struct ath_atx_ac *ac; int tidno, acno; @@ -2855,7 +2737,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { struct ath_atx_tid *tid; int tidno, i; @@ -2869,3 +2751,57 @@ void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an) } } } + +void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb) +{ + int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ath_tx_control txctl; + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } + + /* Add the padding after the header if this is not already done */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + padsize = hdrlen % 4; + if (skb_headroom(skb) < padsize) { + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX CABQ padding " + "failed\n", __func__); + dev_kfree_skb_any(skb); + return; + } + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, hdrlen); + } + + DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting CABQ packet, skb: %p\n", + __func__, + skb); + + memset(&txctl, 0, sizeof(struct ath_tx_control)); + txctl.flags = ATH9K_TXDESC_CAB; + if (ath_tx_prepare(sc, skb, &txctl) == 0) { + /* + * Start DMA mapping. + * ath_tx_start_dma() will be called either synchronously + * or asynchrounsly once DMA is complete. + */ + xmit_map_sg(sc, skb, &txctl); + } else { + ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE); + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX CABQ failed\n", __func__); + dev_kfree_skb_any(skb); + } +} + diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index bd65c485098..ecb02bdaab5 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -2258,7 +2258,7 @@ static int atmel_get_freq(struct net_device *dev, static int atmel_set_scan(struct net_device *dev, struct iw_request_info *info, - struct iw_param *vwrq, + struct iw_point *dwrq, char *extra) { struct atmel_private *priv = netdev_priv(dev); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 12617cd0b78..d2388e8d179 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -158,7 +158,7 @@ static int atmel_probe(struct pcmcia_device *p_dev) DEBUG(0, "atmel_attach()\n"); /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; p_dev->irq.Handler = NULL; diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 1fa043d1802..1f81d36f87c 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -80,6 +80,18 @@ config B43_NPHY SAY N. +config B43_PHY_LP + bool "IEEE 802.11g LP-PHY support (BROKEN)" + depends on B43 && EXPERIMENTAL && BROKEN + ---help--- + Support for the LP-PHY. + The LP-PHY is an IEEE 802.11g based PHY built into some notebooks + and embedded devices. + + THIS IS BROKEN AND DOES NOT WORK YET. + + SAY N. + # This config option automatically enables b43 LEDS support, # if it's possible. config B43_LEDS diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index 8c52b0b9862..14a02b3aea5 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -1,8 +1,11 @@ b43-y += main.o b43-y += tables.o b43-$(CONFIG_B43_NPHY) += tables_nphy.o -b43-y += phy.o -b43-$(CONFIG_B43_NPHY) += nphy.o +b43-y += phy_common.o +b43-y += phy_g.o +b43-y += phy_a.o +b43-$(CONFIG_B43_NPHY) += phy_n.o +b43-$(CONFIG_B43_PHY_LP) += phy_lp.o b43-y += sysfs.o b43-y += xmit.o b43-y += lo.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index edcdfa36645..427b8203e3f 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -12,7 +12,7 @@ #include "leds.h" #include "rfkill.h" #include "lo.h" -#include "phy.h" +#include "phy_common.h" /* The unique identifier of the firmware that's officially supported by @@ -173,6 +173,11 @@ enum { #define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */ #define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */ #define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */ +/* TSSI information */ +#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */ /* SHM_SHARED TX FIFO variables */ #define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */ #define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */ @@ -508,122 +513,6 @@ struct b43_iv { } __attribute__((__packed__)); -struct b43_phy { - /* Band support flags. */ - bool supports_2ghz; - bool supports_5ghz; - - /* GMODE bit enabled? */ - bool gmode; - - /* Analog Type */ - u8 analog; - /* B43_PHYTYPE_ */ - u8 type; - /* PHY revision number. */ - u8 rev; - - /* Radio versioning */ - u16 radio_manuf; /* Radio manufacturer */ - u16 radio_ver; /* Radio version */ - u8 radio_rev; /* Radio revision */ - - bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ - - /* ACI (adjacent channel interference) flags. */ - bool aci_enable; - bool aci_wlan_automatic; - bool aci_hw_rssi; - - /* Radio switched on/off */ - bool radio_on; - struct { - /* Values saved when turning the radio off. - * They are needed when turning it on again. */ - bool valid; - u16 rfover; - u16 rfoverval; - } radio_off_context; - - u16 minlowsig[2]; - u16 minlowsigpos[2]; - - /* TSSI to dBm table in use */ - const s8 *tssi2dbm; - /* Target idle TSSI */ - int tgt_idle_tssi; - /* Current idle TSSI */ - int cur_idle_tssi; - - /* LocalOscillator control values. */ - struct b43_txpower_lo_control *lo_control; - /* Values from b43_calc_loopback_gain() */ - s16 max_lb_gain; /* Maximum Loopback gain in hdB */ - s16 trsw_rx_gain; /* TRSW RX gain in hdB */ - s16 lna_lod_gain; /* LNA lod */ - s16 lna_gain; /* LNA */ - s16 pga_gain; /* PGA */ - - /* Desired TX power level (in dBm). - * This is set by the user and adjusted in b43_phy_xmitpower(). */ - u8 power_level; - /* A-PHY TX Power control value. */ - u16 txpwr_offset; - - /* Current TX power level attenuation control values */ - struct b43_bbatt bbatt; - struct b43_rfatt rfatt; - u8 tx_control; /* B43_TXCTL_XXX */ - - /* Hardware Power Control enabled? */ - bool hardware_power_control; - - /* Current Interference Mitigation mode */ - int interfmode; - /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: - * bit 0-11: offset - * bit 12-15: register ID - * bit 16-32: value - * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT - */ -#define B43_INTERFSTACK_SIZE 26 - u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure - - /* Saved values from the NRSSI Slope calculation */ - s16 nrssi[2]; - s32 nrssislope; - /* In memory nrssi lookup table. */ - s8 nrssi_lt[64]; - - /* current channel */ - u8 channel; - - u16 lofcal; - - u16 initval; //FIXME rename? - - /* PHY TX errors counter. */ - atomic_t txerr_cnt; - - /* The device does address auto increment for the OFDM tables. - * We cache the previously used address here and omit the address - * write on the next table access, if possible. */ - u16 ofdmtab_addr; /* The address currently set in hardware. */ - enum { /* The last data flow direction. */ - B43_OFDMTAB_DIRECTION_UNKNOWN = 0, - B43_OFDMTAB_DIRECTION_READ, - B43_OFDMTAB_DIRECTION_WRITE, - } ofdmtab_addr_direction; - -#if B43_DEBUG - /* Manual TX-power control enabled? */ - bool manual_txpower_control; - /* PHY registers locked by b43_phy_lock()? */ - bool phy_locked; -#endif /* B43_DEBUG */ -}; - /* Data structures for DMA transmission, per 80211 core. */ struct b43_dma { struct b43_dmaring *tx_ring_AC_BK; /* Background */ @@ -680,7 +569,7 @@ struct b43_key { #define B43_QOS_VOICE B43_QOS_PARAMS(3) /* QOS parameter hardware data structure offsets. */ -#define B43_NR_QOSPARAMS 22 +#define B43_NR_QOSPARAMS 16 enum { B43_QOSPARAM_TXOP = 0, B43_QOSPARAM_CWMIN, @@ -696,8 +585,6 @@ enum { struct b43_qos_params { /* The QOS parameters */ struct ieee80211_tx_queue_params p; - /* Does this need to get uploaded to hardware? */ - bool need_hw_update; }; struct b43_wldev; @@ -759,11 +646,13 @@ struct b43_wl { bool beacon_templates_virgin; /* Never wrote the templates? */ struct work_struct beacon_update_trigger; - /* The current QOS parameters for the 4 queues. - * This is protected by the irq_lock. */ + /* The current QOS parameters for the 4 queues. */ struct b43_qos_params qos_params[4]; - /* Workqueue for updating QOS parameters in hardware. */ - struct work_struct qos_update_work; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; }; /* In-memory representation of a cached microcode file. */ @@ -908,6 +797,15 @@ static inline int b43_is_mode(struct b43_wl *wl, int type) return (wl->operating && wl->if_type == type); } +/** + * b43_current_band - Returns the currently used band. + * Returns one of IEEE80211_BAND_2GHZ and IEEE80211_BAND_5GHZ. + */ +static inline enum ieee80211_band b43_current_band(struct b43_wl *wl) +{ + return wl->hw->conf.channel->band; +} + static inline u16 b43_read16(struct b43_wldev *dev, u16 offset) { return ssb_read16(dev->dev, offset); diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 29851bc1101..06a01da8016 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -443,76 +443,6 @@ out_unlock: return count; } -static ssize_t txpower_g_read_file(struct b43_wldev *dev, - char *buf, size_t bufsize) -{ - ssize_t count = 0; - - if (dev->phy.type != B43_PHYTYPE_G) { - fappend("Device is not a G-PHY\n"); - goto out; - } - fappend("Control: %s\n", dev->phy.manual_txpower_control ? - "MANUAL" : "AUTOMATIC"); - fappend("Baseband attenuation: %u\n", dev->phy.bbatt.att); - fappend("Radio attenuation: %u\n", dev->phy.rfatt.att); - fappend("TX Mixer Gain: %s\n", - (dev->phy.tx_control & B43_TXCTL_TXMIX) ? "ON" : "OFF"); - fappend("PA Gain 2dB: %s\n", - (dev->phy.tx_control & B43_TXCTL_PA2DB) ? "ON" : "OFF"); - fappend("PA Gain 3dB: %s\n", - (dev->phy.tx_control & B43_TXCTL_PA3DB) ? "ON" : "OFF"); - fappend("\n\n"); - fappend("You can write to this file:\n"); - fappend("Writing \"auto\" enables automatic txpower control.\n"); - fappend - ("Writing the attenuation values as \"bbatt rfatt txmix pa2db pa3db\" " - "enables manual txpower control.\n"); - fappend("Example: 5 4 0 0 1\n"); - fappend("Enables manual control with Baseband attenuation 5, " - "Radio attenuation 4, No TX Mixer Gain, " - "No PA Gain 2dB, With PA Gain 3dB.\n"); -out: - return count; -} - -static int txpower_g_write_file(struct b43_wldev *dev, - const char *buf, size_t count) -{ - if (dev->phy.type != B43_PHYTYPE_G) - return -ENODEV; - if ((count >= 4) && (memcmp(buf, "auto", 4) == 0)) { - /* Automatic control */ - dev->phy.manual_txpower_control = 0; - b43_phy_xmitpower(dev); - } else { - int bbatt = 0, rfatt = 0, txmix = 0, pa2db = 0, pa3db = 0; - /* Manual control */ - if (sscanf(buf, "%d %d %d %d %d", &bbatt, &rfatt, - &txmix, &pa2db, &pa3db) != 5) - return -EINVAL; - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - dev->phy.manual_txpower_control = 1; - dev->phy.bbatt.att = bbatt; - dev->phy.rfatt.att = rfatt; - dev->phy.tx_control = 0; - if (txmix) - dev->phy.tx_control |= B43_TXCTL_TXMIX; - if (pa2db) - dev->phy.tx_control |= B43_TXCTL_PA2DB; - if (pa3db) - dev->phy.tx_control |= B43_TXCTL_PA3DB; - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_set_txpower_g(dev, &dev->phy.bbatt, - &dev->phy.rfatt, dev->phy.tx_control); - b43_radio_unlock(dev); - b43_phy_unlock(dev); - } - - return 0; -} - /* wl->irq_lock is locked */ static int restart_write_file(struct b43_wldev *dev, const char *buf, size_t count) @@ -560,7 +490,7 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, err = -ENODEV; goto out; } - lo = phy->lo_control; + lo = phy->g->lo_control; fappend("-- Local Oscillator calibration data --\n\n"); fappend("HW-power-control enabled: %d\n", dev->phy.hardware_power_control); @@ -578,8 +508,8 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, list_for_each_entry(cal, &lo->calib_list, list) { bool active; - active = (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && - b43_compare_rfatt(&cal->rfatt, &phy->rfatt)); + active = (b43_compare_bbatt(&cal->bbatt, &phy->g->bbatt) && + b43_compare_rfatt(&cal->rfatt, &phy->g->rfatt)); fappend("BB(%d), RF(%d,%d) -> I=%d, Q=%d " "(expires in %lu sec)%s\n", cal->bbatt.att, @@ -763,7 +693,6 @@ B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1); B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1); B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0); -B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0); B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1); B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0); @@ -877,7 +806,6 @@ void b43_debugfs_add_device(struct b43_wldev *dev) ADD_FILE(mmio32write, 0200); ADD_FILE(tsf, 0600); ADD_FILE(txstat, 0400); - ADD_FILE(txpower_g, 0600); ADD_FILE(restart, 0200); ADD_FILE(loctls, 0400); @@ -907,7 +835,6 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) debugfs_remove(e->file_mmio32write.dentry); debugfs_remove(e->file_tsf.dentry); debugfs_remove(e->file_txstat.dentry); - debugfs_remove(e->file_txpower_g.dentry); debugfs_remove(e->file_restart.dentry); debugfs_remove(e->file_loctls.dentry); diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c index 9c854d6aae3..6a18a147046 100644 --- a/drivers/net/wireless/b43/lo.c +++ b/drivers/net/wireless/b43/lo.c @@ -29,7 +29,7 @@ #include "b43.h" #include "lo.h" -#include "phy.h" +#include "phy_g.h" #include "main.h" #include <linux/delay.h> @@ -174,7 +174,8 @@ static u16 lo_txctl_register_table(struct b43_wldev *dev, static void lo_measure_txctl_values(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 reg, mask; u16 trsw_rx, pga; u16 radio_pctl_reg; @@ -195,7 +196,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) int lb_gain; /* Loopback gain (in dB) */ trsw_rx = 0; - lb_gain = phy->max_lb_gain / 2; + lb_gain = gphy->max_lb_gain / 2; if (lb_gain > 10) { radio_pctl_reg = 0; pga = abs(10 - lb_gain) / 6; @@ -226,7 +227,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) } b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) & 0xFFF0) | radio_pctl_reg); - b43_phy_set_baseband_attenuation(dev, 2); + b43_gphy_set_baseband_attenuation(dev, 2); reg = lo_txctl_register_table(dev, &mask, NULL); mask = ~mask; @@ -277,7 +278,8 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) static void lo_read_power_vector(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; int i; u64 tmp; u64 power_vector = 0; @@ -298,6 +300,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev, s16 max_rx_gain, int use_trsw_rx) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp; if (max_rx_gain < 0) @@ -308,7 +311,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev, int trsw_rx_gain; if (use_trsw_rx) { - trsw_rx_gain = phy->trsw_rx_gain / 2; + trsw_rx_gain = gphy->trsw_rx_gain / 2; if (max_rx_gain >= trsw_rx_gain) { trsw_rx_gain = max_rx_gain - trsw_rx_gain; trsw_rx = 0x20; @@ -316,38 +319,38 @@ static void lo_measure_gain_values(struct b43_wldev *dev, } else trsw_rx_gain = max_rx_gain; if (trsw_rx_gain < 9) { - phy->lna_lod_gain = 0; + gphy->lna_lod_gain = 0; } else { - phy->lna_lod_gain = 1; + gphy->lna_lod_gain = 1; trsw_rx_gain -= 8; } trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D); - phy->pga_gain = trsw_rx_gain / 3; - if (phy->pga_gain >= 5) { - phy->pga_gain -= 5; - phy->lna_gain = 2; + gphy->pga_gain = trsw_rx_gain / 3; + if (gphy->pga_gain >= 5) { + gphy->pga_gain -= 5; + gphy->lna_gain = 2; } else - phy->lna_gain = 0; + gphy->lna_gain = 0; } else { - phy->lna_gain = 0; - phy->trsw_rx_gain = 0x20; + gphy->lna_gain = 0; + gphy->trsw_rx_gain = 0x20; if (max_rx_gain >= 0x14) { - phy->lna_lod_gain = 1; - phy->pga_gain = 2; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 2; } else if (max_rx_gain >= 0x12) { - phy->lna_lod_gain = 1; - phy->pga_gain = 1; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 1; } else if (max_rx_gain >= 0xF) { - phy->lna_lod_gain = 1; - phy->pga_gain = 0; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 0; } else { - phy->lna_lod_gain = 0; - phy->pga_gain = 0; + gphy->lna_lod_gain = 0; + gphy->pga_gain = 0; } } tmp = b43_radio_read16(dev, 0x7A); - if (phy->lna_lod_gain == 0) + if (gphy->lna_lod_gain == 0) tmp &= ~0x0008; else tmp |= 0x0008; @@ -392,10 +395,11 @@ static void lo_measure_setup(struct b43_wldev *dev, { struct ssb_sprom *sprom = &dev->dev->bus->sprom; struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 tmp; - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { sav->phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK); sav->phy_extg_01 = b43_phy_read(dev, B43_PHY_EXTG(0x01)); sav->phy_dacctl_hwpctl = b43_phy_read(dev, B43_PHY_DACCTL); @@ -496,7 +500,7 @@ static void lo_measure_setup(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802); if (phy->rev >= 2) b43_dummy_transmission(dev); - b43_radio_selectchannel(dev, 6, 0); + b43_gphy_channel_switch(dev, 6, 0); b43_radio_read16(dev, 0x51); /* dummy read */ if (phy->type == B43_PHYTYPE_G) b43_phy_write(dev, B43_PHY_CCK(0x2F), 0); @@ -520,18 +524,19 @@ static void lo_measure_restore(struct b43_wldev *dev, struct lo_g_saved_values *sav) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp; if (phy->rev >= 2) { b43_phy_write(dev, B43_PHY_PGACTL, 0xE300); - tmp = (phy->pga_gain << 8); + tmp = (gphy->pga_gain << 8); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA0); udelay(5); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA2); udelay(2); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA3); } else { - tmp = (phy->pga_gain | 0xEFA0); + tmp = (gphy->pga_gain | 0xEFA0); b43_phy_write(dev, B43_PHY_PGACTL, tmp); } if (phy->type == B43_PHYTYPE_G) { @@ -572,7 +577,7 @@ static void lo_measure_restore(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x3E), sav->phy_cck_3E); b43_phy_write(dev, B43_PHY_CRS0, sav->phy_crs0); } - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { tmp = (sav->phy_lo_mask & 0xBFFF); b43_phy_write(dev, B43_PHY_LO_MASK, tmp); b43_phy_write(dev, B43_PHY_EXTG(0x01), sav->phy_extg_01); @@ -580,7 +585,7 @@ static void lo_measure_restore(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x14), sav->phy_cck_14); b43_phy_write(dev, B43_PHY_HPWR_TSSICTL, sav->phy_hpwr_tssictl); } - b43_radio_selectchannel(dev, sav->old_channel, 1); + b43_gphy_channel_switch(dev, sav->old_channel, 1); } struct b43_lo_g_statemachine { @@ -597,6 +602,7 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, struct b43_lo_g_statemachine *d) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_loctl test_loctl; struct b43_loctl orig_loctl; struct b43_loctl prev_loctl = { @@ -646,9 +652,9 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, test_loctl.q != prev_loctl.q) && (abs(test_loctl.i) <= 16 && abs(test_loctl.q) <= 16)) { b43_lo_write(dev, &test_loctl); - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); if (feedth < d->lowest_feedth) { memcpy(probe_loctl, &test_loctl, sizeof(struct b43_loctl)); @@ -677,6 +683,7 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, int *max_rx_gain) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_lo_g_statemachine d; u16 feedth; int found_lower; @@ -693,17 +700,17 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, max_repeat = 4; do { b43_lo_write(dev, &d.min_loctl); - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); if (feedth < 0x258) { if (feedth >= 0x12C) *max_rx_gain += 6; else *max_rx_gain += 3; - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); } d.lowest_feedth = feedth; @@ -752,6 +759,7 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, const struct b43_rfatt *rfatt) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_loctl loctl = { .i = 0, .q = 0, @@ -782,11 +790,11 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, if (rfatt->with_padmix) max_rx_gain -= pad_mix_gain; if (has_loopback_gain(phy)) - max_rx_gain += phy->max_lb_gain; + max_rx_gain += gphy->max_lb_gain; lo_measure_gain_values(dev, max_rx_gain, has_loopback_gain(phy)); - b43_phy_set_baseband_attenuation(dev, bbatt->att); + b43_gphy_set_baseband_attenuation(dev, bbatt->att); lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain); lo_measure_restore(dev, &saved_regs); @@ -820,7 +828,7 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, const struct b43_bbatt *bbatt, const struct b43_rfatt *rfatt) { - struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; struct b43_lo_calib *c; c = b43_find_lo_calib(lo, bbatt, rfatt); @@ -839,7 +847,8 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; int i; int rf_offset, bb_offset; const struct b43_rfatt *rfatt; @@ -917,14 +926,14 @@ static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf) void b43_lo_g_adjust(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; struct b43_lo_calib *cal; struct b43_rfatt rf; - memcpy(&rf, &phy->rfatt, sizeof(rf)); + memcpy(&rf, &gphy->rfatt, sizeof(rf)); b43_lo_fixup_rfatt(&rf); - cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf); + cal = b43_get_calib_lo_settings(dev, &gphy->bbatt, &rf); if (!cal) return; b43_lo_write(dev, &cal->ctl); @@ -952,7 +961,8 @@ void b43_lo_g_adjust_to(struct b43_wldev *dev, void b43_lo_g_maintanance_work(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; unsigned long now; unsigned long expire; struct b43_lo_calib *cal, *tmp; @@ -962,7 +972,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) if (!lo) return; now = jiffies; - hwpctl = b43_has_hardware_pctl(phy); + hwpctl = b43_has_hardware_pctl(dev); if (hwpctl) { /* Read the power vector and update it, if needed. */ @@ -983,8 +993,8 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) if (!time_before(cal->calib_time, expire)) continue; /* This item expired. */ - if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && - b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) { + if (b43_compare_bbatt(&cal->bbatt, &gphy->bbatt) && + b43_compare_rfatt(&cal->rfatt, &gphy->rfatt)) { B43_WARN_ON(current_item_expired); current_item_expired = 1; } @@ -1002,7 +1012,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) /* Recalibrate currently used LO setting. */ if (b43_debug(dev, B43_DBG_LO)) b43dbg(dev->wl, "LO: Recalibrating current LO setting\n"); - cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt); + cal = b43_calibrate_lo_setting(dev, &gphy->bbatt, &gphy->rfatt); if (cal) { list_add(&cal->list, &lo->calib_list); b43_lo_write(dev, &cal->ctl); @@ -1013,7 +1023,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) void b43_lo_g_cleanup(struct b43_wldev *dev) { - struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; struct b43_lo_calib *cal, *tmp; if (!lo) @@ -1027,9 +1037,7 @@ void b43_lo_g_cleanup(struct b43_wldev *dev) /* LO Initialization */ void b43_lo_g_init(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { lo_read_power_vector(dev); b43_gphy_dc_lt_init(dev, 1); } diff --git a/drivers/net/wireless/b43/lo.h b/drivers/net/wireless/b43/lo.h index 1da321cabc1..3b27e20eff8 100644 --- a/drivers/net/wireless/b43/lo.h +++ b/drivers/net/wireless/b43/lo.h @@ -1,7 +1,9 @@ #ifndef B43_LO_H_ #define B43_LO_H_ -#include "phy.h" +/* G-PHY Local Oscillator */ + +#include "phy_g.h" struct b43_wldev; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 7205a936ec7..14c44df584d 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -44,8 +44,9 @@ #include "b43.h" #include "main.h" #include "debugfs.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_g.h" +#include "phy_n.h" #include "dma.h" #include "pio.h" #include "sysfs.h" @@ -814,7 +815,7 @@ void b43_dummy_transmission(struct b43_wldev *dev) break; udelay(10); } - for (i = 0x00; i < 0x0A; i++) { + for (i = 0x00; i < 0x19; i++) { value = b43_read16(dev, 0x0690); if (!(value & 0x0100)) break; @@ -1051,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) } } -/* Turn the Analog ON/OFF */ -static void b43_switch_analog(struct b43_wldev *dev, int on) -{ - switch (dev->phy.type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); - break; - case B43_PHYTYPE_N: - b43_phy_write(dev, B43_NPHY_AFECTL_OVER, - on ? 0 : 0x7FFF); - break; - default: - B43_WARN_ON(1); - } -} - void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) { u32 tmslow; @@ -1090,8 +1074,12 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ msleep(1); - /* Turn Analog ON */ - b43_switch_analog(dev, 1); + /* Turn Analog ON, but only if we already know the PHY-type. + * This protects against very early setup where we don't know the + * PHY-type, yet. wireless_core_reset will be called once again later, + * when we know the PHY-type. */ + if (dev->phy.ops) + dev->phy.ops->switch_analog(dev, 1); macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_GMODE; @@ -1174,6 +1162,8 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) { /* Top half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; if (dev->noisecalc.calculation_running) return; dev->noisecalc.calculation_running = 1; @@ -1184,7 +1174,7 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) static void handle_irq_noise(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *phy = dev->phy.g; u16 tmp; u8 noise[4]; u8 i, j; @@ -1192,6 +1182,9 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; + /* Possible race condition: It might be possible that the user * changed to a different channel in the meantime since we * started the calculation. We ignore that fact, since it's @@ -1251,13 +1244,13 @@ generate_new: static void handle_irq_tbtt_indication(struct b43_wldev *dev) { - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) { + if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) { ///TODO: PS TBTT } else { if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) b43_power_saving_ctl_bits(dev, 0); } - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) dev->dfq_valid = 1; } @@ -1606,8 +1599,8 @@ static void handle_irq_beacon(struct b43_wldev *dev) struct b43_wl *wl = dev->wl; u32 cmd, beacon0_valid, beacon1_valid; - if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) && - !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && + !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) return; /* This is the bottom half of the asynchronous beacon update. */ @@ -2575,10 +2568,10 @@ static void b43_adjust_opmode(struct b43_wldev *dev) ctl &= ~B43_MACCTL_BEACPROMISC; ctl |= B43_MACCTL_INFRA; - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) ctl |= B43_MACCTL_AP; - else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) + else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) ctl &= ~B43_MACCTL_INFRA; if (wl->filter_flags & FIF_CONTROL) @@ -2688,9 +2681,8 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) /* This is the opposite of b43_chip_init() */ static void b43_chip_exit(struct b43_wldev *dev) { - b43_radio_turn_off(dev, 1); + b43_phy_exit(dev); b43_gpio_cleanup(dev); - b43_lo_g_cleanup(dev); /* firmware is released later */ } @@ -2700,7 +2692,7 @@ static void b43_chip_exit(struct b43_wldev *dev) static int b43_chip_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err, tmp; + int err; u32 value32, macctl; u16 value16; @@ -2725,19 +2717,20 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_upload_initvals(dev); if (err) goto err_gpio_clean; - b43_radio_turn_on(dev); - b43_write16(dev, 0x03E6, 0x0000); + /* Turn the Analog on and initialize the PHY. */ + phy->ops->switch_analog(dev, 1); err = b43_phy_init(dev); if (err) - goto err_radio_off; + goto err_gpio_clean; - /* Select initial Interference Mitigation. */ - tmp = phy->interfmode; - phy->interfmode = B43_INTERFMODE_NONE; - b43_radio_set_interference_mitigation(dev, tmp); + /* Disable Interference Mitigation. */ + if (phy->ops->interf_mitigation) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); - b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT); + /* Select the antennae */ + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); if (phy->type == B43_PHYTYPE_B) { @@ -2790,8 +2783,6 @@ static int b43_chip_init(struct b43_wldev *dev) out: return err; -err_radio_off: - b43_radio_turn_off(dev, 1); err_gpio_clean: b43_gpio_cleanup(dev); return err; @@ -2799,25 +2790,13 @@ err_gpio_clean: static void b43_periodic_every60sec(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = dev->phy.ops; - if (phy->type != B43_PHYTYPE_G) - return; - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { - b43_mac_suspend(dev); - b43_calc_nrssi_slope(dev); - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { - u8 old_chan = phy->channel; - - /* VCO Calibration */ - if (old_chan >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - b43_radio_selectchannel(dev, old_chan, 0); - } - b43_mac_enable(dev); - } + if (ops->pwork_60sec) + ops->pwork_60sec(dev); + + /* Force check the TX power emission now. */ + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); } static void b43_periodic_every30sec(struct b43_wldev *dev) @@ -2845,32 +2824,8 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) } } - if (phy->type == B43_PHYTYPE_G) { - //TODO: update_aci_moving_average - if (phy->aci_enable && phy->aci_wlan_automatic) { - b43_mac_suspend(dev); - if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) { - if (0 /*TODO: bunch of conditions */ ) { - b43_radio_set_interference_mitigation - (dev, B43_INTERFMODE_MANUALWLAN); - } - } else if (1 /*TODO*/) { - /* - if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) { - b43_radio_set_interference_mitigation(dev, - B43_INTERFMODE_NONE); - } - */ - } - b43_mac_enable(dev); - } else if (phy->interfmode == B43_INTERFMODE_NONWLAN && - phy->rev == 1) { - //TODO: implement rev1 workaround - } - } - b43_phy_xmitpower(dev); //FIXME: unless scanning? - b43_lo_g_maintanance_work(dev); - //TODO for APHY (temperature?) + if (phy->ops->pwork_15sec) + phy->ops->pwork_15sec(dev); atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); @@ -3104,36 +3059,31 @@ static void b43_qos_params_upload(struct b43_wldev *dev, } } -/* Update the QOS parameters in hardware. */ -static void b43_qos_update(struct b43_wldev *dev) +/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */ +static const u16 b43_qos_shm_offsets[] = { + /* [mac80211-queue-nr] = SHM_OFFSET, */ + [0] = B43_QOS_VOICE, + [1] = B43_QOS_VIDEO, + [2] = B43_QOS_BESTEFFORT, + [3] = B43_QOS_BACKGROUND, +}; + +/* Update all QOS parameters in hardware. */ +static void b43_qos_upload_all(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_qos_params *params; - unsigned long flags; unsigned int i; - /* Mapping of mac80211 queues to b43 SHM offsets. */ - static const u16 qos_shm_offsets[] = { - [0] = B43_QOS_VOICE, - [1] = B43_QOS_VIDEO, - [2] = B43_QOS_BESTEFFORT, - [3] = B43_QOS_BACKGROUND, - }; - BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params)); + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); b43_mac_suspend(dev); - spin_lock_irqsave(&wl->irq_lock, flags); - for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); - if (params->need_hw_update) { - b43_qos_params_upload(dev, &(params->p), - qos_shm_offsets[i]); - params->need_hw_update = 0; - } + b43_qos_params_upload(dev, &(params->p), + b43_qos_shm_offsets[i]); } - - spin_unlock_irqrestore(&wl->irq_lock, flags); b43_mac_enable(dev); } @@ -3142,25 +3092,50 @@ static void b43_qos_clear(struct b43_wl *wl) struct b43_qos_params *params; unsigned int i; + /* Initialize QoS parameters to sane defaults. */ + + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); + for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); - memset(&(params->p), 0, sizeof(params->p)); - params->p.aifs = -1; - params->need_hw_update = 1; + switch (b43_qos_shm_offsets[i]) { + case B43_QOS_VOICE: + params->p.txop = 0; + params->p.aifs = 2; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x0001; + break; + case B43_QOS_VIDEO: + params->p.txop = 0; + params->p.aifs = 2; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x0001; + break; + case B43_QOS_BESTEFFORT: + params->p.txop = 0; + params->p.aifs = 3; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x03FF; + break; + case B43_QOS_BACKGROUND: + params->p.txop = 0; + params->p.aifs = 7; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x03FF; + break; + default: + B43_WARN_ON(1); + } } } /* Initialize the core's QOS capabilities */ static void b43_qos_init(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; - unsigned int i; - /* Upload the current QOS parameters. */ - for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) - wl->qos_params[i].need_hw_update = 1; - b43_qos_update(dev); + b43_qos_upload_all(dev); /* Enable QOS support. */ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); @@ -3169,25 +3144,13 @@ static void b43_qos_init(struct b43_wldev *dev) | B43_MMIO_IFSCTL_USE_EDCF); } -static void b43_qos_update_work(struct work_struct *work) -{ - struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work); - struct b43_wldev *dev; - - mutex_lock(&wl->mutex); - dev = wl->current_dev; - if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) - b43_qos_update(dev); - mutex_unlock(&wl->mutex); -} - static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, const struct ieee80211_tx_queue_params *params) { struct b43_wl *wl = hw_to_b43_wl(hw); - unsigned long flags; + struct b43_wldev *dev; unsigned int queue = (unsigned int)_queue; - struct b43_qos_params *p; + int err = -ENODEV; if (queue >= ARRAY_SIZE(wl->qos_params)) { /* Queue not available or don't support setting @@ -3195,16 +3158,25 @@ static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, * confuse mac80211. */ return 0; } + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); - spin_lock_irqsave(&wl->irq_lock, flags); - p = &(wl->qos_params[queue]); - memcpy(&(p->p), params, sizeof(p->p)); - p->need_hw_update = 1; - spin_unlock_irqrestore(&wl->irq_lock, flags); + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) + goto out_unlock; - queue_work(hw->workqueue, &wl->qos_update_work); + memcpy(&(wl->qos_params[queue].p), params, sizeof(*params)); + b43_mac_suspend(dev); + b43_qos_params_upload(dev, &(wl->qos_params[queue].p), + b43_qos_shm_offsets[queue]); + b43_mac_enable(dev); + err = 0; - return 0; +out_unlock: + mutex_unlock(&wl->mutex); + + return err; } static int b43_op_get_tx_stats(struct ieee80211_hw *hw, @@ -3401,7 +3373,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ if (conf->channel->hw_value != phy->channel) - b43_radio_selectchannel(dev, conf->channel->hw_value, 0); + b43_switch_channel(dev, conf->channel->hw_value); /* Enable/Disable ShortSlot timing. */ if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) != @@ -3417,26 +3389,30 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Adjust the desired TX power level. */ if (conf->power_level != 0) { - if (conf->power_level != phy->power_level) { - phy->power_level = conf->power_level; - b43_phy_xmitpower(dev); + spin_lock_irqsave(&wl->irq_lock, flags); + if (conf->power_level != phy->desired_txpower) { + phy->desired_txpower = conf->power_level; + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | + B43_TXPWR_IGNORE_TSSI); } + spin_unlock_irqrestore(&wl->irq_lock, flags); } /* Antennas for RX and management frame TX. */ antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx); b43_mgmtframe_txantenna(dev, antenna); antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx); - b43_set_rx_antenna(dev, antenna); + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, antenna); /* Update templates for AP/mesh mode. */ - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) b43_set_beacon_int(dev, conf->beacon_int); if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { - b43_radio_turn_on(dev); + b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3444,7 +3420,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) "Press the button to turn it on.\n"); } } else { - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); b43info(dev->wl, "Radio turned off by software\n"); } } @@ -3619,14 +3595,14 @@ static int b43_op_config_interface(struct ieee80211_hw *hw, else memset(wl->bssid, 0, ETH_ALEN); if (b43_status(dev) >= B43_STAT_INITIALIZED) { - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) { + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { B43_WARN_ON(vif->type != wl->if_type); if (conf->changed & IEEE80211_IFCC_SSID) b43_set_ssid(dev, conf->ssid, conf->ssid_len); if (conf->changed & IEEE80211_IFCC_BEACON) b43_update_templates(wl); - } else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) { + } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { if (conf->changed & IEEE80211_IFCC_BEACON) b43_update_templates(wl); } @@ -3818,48 +3794,10 @@ static int b43_phy_versioning(struct b43_wldev *dev) static void setup_struct_phy_for_init(struct b43_wldev *dev, struct b43_phy *phy) { - struct b43_txpower_lo_control *lo; - int i; - - memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); - memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); - - phy->aci_enable = 0; - phy->aci_wlan_automatic = 0; - phy->aci_hw_rssi = 0; - - phy->radio_off_context.valid = 0; - - lo = phy->lo_control; - if (lo) { - memset(lo, 0, sizeof(*(phy->lo_control))); - lo->tx_bias = 0xFF; - INIT_LIST_HEAD(&lo->calib_list); - } - phy->max_lb_gain = 0; - phy->trsw_rx_gain = 0; - phy->txpwr_offset = 0; - - /* NRSSI */ - phy->nrssislope = 0; - for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) - phy->nrssi[i] = -1000; - for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) - phy->nrssi_lt[i] = i; - - phy->lofcal = 0xFFFF; - phy->initval = 0xFFFF; - - phy->interfmode = B43_INTERFMODE_NONE; - phy->channel = 0xFF; - phy->hardware_power_control = !!modparam_hwpctl; - + phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); - - /* OFDM-table address caching. */ - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; } static void setup_struct_wldev_for_init(struct b43_wldev *dev) @@ -3965,7 +3903,7 @@ static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) pu_delay = 3700; else pu_delay = 1050; - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle) + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) pu_delay = 500; if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) pu_delay = max(pu_delay, (u16)2400); @@ -3979,7 +3917,7 @@ static void b43_set_pretbtt(struct b43_wldev *dev) u16 pretbtt; /* The time value is in microseconds. */ - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) { + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) { pretbtt = 2; } else { if (dev->phy.type == B43_PHYTYPE_A) @@ -3995,7 +3933,6 @@ static void b43_set_pretbtt(struct b43_wldev *dev) /* Locking: wl->mutex */ static void b43_wireless_core_exit(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; u32 macctl; B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); @@ -4016,12 +3953,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - kfree(phy->lo_control); - phy->lo_control = NULL; + dev->phy.ops->switch_analog(dev, 0); if (dev->wl->current_beacon) { dev_kfree_skb_any(dev->wl->current_beacon); dev->wl->current_beacon = NULL; @@ -4052,29 +3984,23 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_wireless_core_reset(dev, tmp); } - if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) { - phy->lo_control = - kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL); - if (!phy->lo_control) { - err = -ENOMEM; - goto err_busdown; - } - } + /* Reset all data structures. */ setup_struct_wldev_for_init(dev); - - err = b43_phy_init_tssi2dbm_table(dev); - if (err) - goto err_kfree_lo_control; + phy->ops->prepare_structs(dev); /* Enable IRQ routing to this device. */ ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); b43_imcfglo_timeouts_workaround(dev); b43_bluetooth_coext_disable(dev); - b43_phy_early_init(dev); + if (phy->ops->prepare_hardware) { + err = phy->ops->prepare_hardware(dev); + if (err) + goto err_busdown; + } err = b43_chip_init(dev); if (err) - goto err_kfree_tssitbl; + goto err_busdown; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_WLCOREREV, dev->dev->id.revision); hf = b43_hf_read(dev); @@ -4140,15 +4066,9 @@ static int b43_wireless_core_init(struct b43_wldev *dev) out: return err; - err_chip_exit: +err_chip_exit: b43_chip_exit(dev); - err_kfree_tssitbl: - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - err_kfree_lo_control: - kfree(phy->lo_control); - phy->lo_control = NULL; - err_busdown: +err_busdown: ssb_bus_may_powerdown(bus); B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); return err; @@ -4164,11 +4084,11 @@ static int b43_op_add_interface(struct ieee80211_hw *hw, /* TODO: allow WDS/AP devices to coexist */ - if (conf->type != IEEE80211_IF_TYPE_AP && - conf->type != IEEE80211_IF_TYPE_MESH_POINT && - conf->type != IEEE80211_IF_TYPE_STA && - conf->type != IEEE80211_IF_TYPE_WDS && - conf->type != IEEE80211_IF_TYPE_IBSS) + if (conf->type != NL80211_IFTYPE_AP && + conf->type != NL80211_IFTYPE_MESH_POINT && + conf->type != NL80211_IFTYPE_STATION && + conf->type != NL80211_IFTYPE_WDS && + conf->type != NL80211_IFTYPE_ADHOC) return -EOPNOTSUPP; mutex_lock(&wl->mutex); @@ -4283,7 +4203,6 @@ static void b43_op_stop(struct ieee80211_hw *hw) struct b43_wldev *dev = wl->current_dev; b43_rfkill_exit(dev); - cancel_work_sync(&(wl->qos_update_work)); cancel_work_sync(&(wl->beacon_update_trigger)); mutex_lock(&wl->mutex); @@ -4291,6 +4210,8 @@ static void b43_op_stop(struct ieee80211_hw *hw) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); mutex_unlock(&wl->mutex); + + cancel_work_sync(&(wl->txpower_adjust_work)); } static int b43_op_set_retry_limit(struct ieee80211_hw *hw, @@ -4313,7 +4234,8 @@ out_unlock: return err; } -static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set) +static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, bool set) { struct b43_wl *wl = hw_to_b43_wl(hw); unsigned long flags; @@ -4328,7 +4250,7 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set) static void b43_op_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd notify_cmd, - const u8 *addr) + struct ieee80211_sta *sta) { struct b43_wl *wl = hw_to_b43_wl(hw); @@ -4422,6 +4344,7 @@ static void b43_wireless_core_detach(struct b43_wldev *dev) /* We release firmware that late to not be required to re-request * is all the time when we reinit the core. */ b43_release_firmware(dev); + b43_phy_free(dev); } static int b43_wireless_core_attach(struct b43_wldev *dev) @@ -4495,30 +4418,35 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) } } + err = b43_phy_allocate(dev); + if (err) + goto err_powerdown; + dev->phy.gmode = have_2ghz_phy; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); err = b43_validate_chipaccess(dev); if (err) - goto err_powerdown; + goto err_phy_free; err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); if (err) - goto err_powerdown; + goto err_phy_free; /* Now set some default "current_dev" */ if (!wl->current_dev) wl->current_dev = dev; INIT_WORK(&dev->restart_work, b43_chip_reset); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); + dev->phy.ops->switch_analog(dev, 0); ssb_device_disable(dev->dev, 0); ssb_bus_may_powerdown(bus); out: return err; +err_phy_free: + b43_phy_free(dev); err_powerdown: ssb_bus_may_powerdown(bus); return err; @@ -4615,9 +4543,11 @@ static void b43_sprom_fixup(struct ssb_bus *bus) pdev = bus->host_pci; if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) || IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) || + IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) || - IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013)) + IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) || + IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010)) bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST; } } @@ -4650,7 +4580,15 @@ static int b43_wireless_init(struct ssb_device *dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); + hw->queues = b43_modparam_qos ? 4 : 1; + hw->max_altrates = 1; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); @@ -4667,8 +4605,8 @@ static int b43_wireless_init(struct ssb_device *dev) spin_lock_init(&wl->shm_lock); mutex_init(&wl->mutex); INIT_LIST_HEAD(&wl->devlist); - INIT_WORK(&wl->qos_update_work, b43_qos_update_work); INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); + INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); ssb_set_devtypedata(dev, wl); b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); diff --git a/drivers/net/wireless/b43/phy.h b/drivers/net/wireless/b43/phy.h deleted file mode 100644 index 4aab1090352..00000000000 --- a/drivers/net/wireless/b43/phy.h +++ /dev/null @@ -1,340 +0,0 @@ -#ifndef B43_PHY_H_ -#define B43_PHY_H_ - -#include <linux/types.h> - -struct b43_wldev; -struct b43_phy; - -/*** PHY Registers ***/ - -/* Routing */ -#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ -#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ -#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ -#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ -#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ - -/* CCK (B-PHY) registers. */ -#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) -/* N-PHY registers. */ -#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) -/* N-PHY BMODE registers. */ -#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) -/* OFDM (A-PHY) registers. */ -#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) -/* Extended G-PHY registers. */ -#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) - -/* OFDM (A) PHY Registers */ -#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ -#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ -#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ -#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 -#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ -#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ -#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ -#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ -#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ -#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) -#define B43_PHY_CRS0_EN 0x4000 -#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) -#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ -#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ -#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ -#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ -#define B43_PHY_LMS B43_PHY_OFDM(0x55) -#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ -#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ -#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ -#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ -#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ -#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ -#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ -#define B43_PHY_OTABLENR_SHIFT 10 -#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ -#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ -#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ -#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ -#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) -#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ -#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ -#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ -#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ -#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ -#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ -#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) -#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) -#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) -#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) -#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) -#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ -#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ -#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ -#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) -#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) -#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) -#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ -#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ -#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ -#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ -#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ -#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ -#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ - -/* CCK (B) PHY Registers */ -#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ -#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ -#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ -#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ -#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ -#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 -#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ -#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ -#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ -#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ -#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) -#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ -#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ -#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ - -/* Extended G-PHY Registers */ -#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ -#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ -#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ -#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ -#define B43_PHY_GTABNR_SHIFT 10 -#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ -#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ -#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ -#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ -#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ -#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 -#define B43_PHY_RFOVERVAL_LNA 0x7000 -#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 -#define B43_PHY_RFOVERVAL_PGA 0x0F00 -#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 -#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ -#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 -#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ -#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ -#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ -#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ -#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ - -/*** OFDM table numbers ***/ -#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) -#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) -#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) -#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename -#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) -#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) -#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) -#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) -#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) -#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) -#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) -#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) -#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) -#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) -#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) -#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) -#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) -#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) -#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename -#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename -#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) -#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) -#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename -#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) -#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! -#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) -#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) -#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) -#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) -#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) -#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) -#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) - -u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); -void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, - u16 offset, u16 value); -u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); -void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, - u16 offset, u32 value); - -/*** G-PHY table numbers */ -#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) -#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) -#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) -#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) - -u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); //TODO implement -void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); //TODO implement - -#define B43_DEFAULT_CHANNEL_A 36 -#define B43_DEFAULT_CHANNEL_BG 6 - -enum { - B43_ANTENNA0, /* Antenna 0 */ - B43_ANTENNA1, /* Antenna 0 */ - B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ - B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ - B43_ANTENNA2, - B43_ANTENNA3 = 8, - - B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, - B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, -}; - -enum { - B43_INTERFMODE_NONE, - B43_INTERFMODE_NONWLAN, - B43_INTERFMODE_MANUALWLAN, - B43_INTERFMODE_AUTOWLAN, -}; - -/* Masks for the different PHY versioning registers. */ -#define B43_PHYVER_ANALOG 0xF000 -#define B43_PHYVER_ANALOG_SHIFT 12 -#define B43_PHYVER_TYPE 0x0F00 -#define B43_PHYVER_TYPE_SHIFT 8 -#define B43_PHYVER_VERSION 0x00FF - -void b43_phy_lock(struct b43_wldev *dev); -void b43_phy_unlock(struct b43_wldev *dev); - - -/* Read a value from a PHY register */ -u16 b43_phy_read(struct b43_wldev *dev, u16 offset); -/* Write a value to a PHY register */ -void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val); -/* Mask a PHY register with a mask */ -void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); -/* OR a PHY register with a bitmap */ -void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); -/* Mask and OR a PHY register with a mask and bitmap */ -void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); - - -int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev); - -void b43_phy_early_init(struct b43_wldev *dev); -int b43_phy_init(struct b43_wldev *dev); - -void b43_set_rx_antenna(struct b43_wldev *dev, int antenna); - -void b43_phy_xmitpower(struct b43_wldev *dev); - -/* Returns the boolean whether the board has HardwarePowerControl */ -bool b43_has_hardware_pctl(struct b43_phy *phy); -/* Returns the boolean whether "TX Magnification" is enabled. */ -#define has_tx_magnification(phy) \ - (((phy)->rev >= 2) && \ - ((phy)->radio_ver == 0x2050) && \ - ((phy)->radio_rev == 8)) -/* Card uses the loopback gain stuff */ -#define has_loopback_gain(phy) \ - (((phy)->rev > 1) || ((phy)->gmode)) - -/* Radio Attenuation (RF Attenuation) */ -struct b43_rfatt { - u8 att; /* Attenuation value */ - bool with_padmix; /* Flag, PAD Mixer enabled. */ -}; -struct b43_rfatt_list { - /* Attenuation values list */ - const struct b43_rfatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_rfatt(const struct b43_rfatt *a, - const struct b43_rfatt *b) -{ - return ((a->att == b->att) && - (a->with_padmix == b->with_padmix)); -} - -/* Baseband Attenuation */ -struct b43_bbatt { - u8 att; /* Attenuation value */ -}; -struct b43_bbatt_list { - /* Attenuation values list */ - const struct b43_bbatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_bbatt(const struct b43_bbatt *a, - const struct b43_bbatt *b) -{ - return (a->att == b->att); -} - -/* tx_control bits. */ -#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ -#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ -#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ - -/* Write BasebandAttenuation value to the device. */ -void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation); - -extern const u8 b43_radio_channel_codes_bg[]; - -void b43_radio_lock(struct b43_wldev *dev); -void b43_radio_unlock(struct b43_wldev *dev); - - -/* Read a value from a 16bit radio register */ -u16 b43_radio_read16(struct b43_wldev *dev, u16 offset); -/* Write a value to a 16bit radio register */ -void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val); -/* Mask a 16bit radio register with a mask */ -void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); -/* OR a 16bit radio register with a bitmap */ -void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); -/* Mask and OR a PHY register with a mask and bitmap */ -void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); - - -u16 b43_radio_init2050(struct b43_wldev *dev); -void b43_radio_init2060(struct b43_wldev *dev); - -void b43_radio_turn_on(struct b43_wldev *dev); -void b43_radio_turn_off(struct b43_wldev *dev, bool force); - -int b43_radio_selectchannel(struct b43_wldev *dev, u8 channel, - int synthetic_pu_workaround); - -u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel); -u8 b43_radio_aci_scan(struct b43_wldev *dev); - -int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode); - -void b43_calc_nrssi_slope(struct b43_wldev *dev); -void b43_calc_nrssi_threshold(struct b43_wldev *dev); -s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset); -void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val); -void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val); -void b43_nrssi_mem_update(struct b43_wldev *dev); - -void b43_radio_set_tx_iq(struct b43_wldev *dev); -u16 b43_radio_calibrationvalue(struct b43_wldev *dev); - -void b43_put_attenuation_into_ranges(struct b43_wldev *dev, - int *_bbatt, int *_rfatt); - -void b43_set_txpower_g(struct b43_wldev *dev, - const struct b43_bbatt *bbatt, - const struct b43_rfatt *rfatt, u8 tx_control); - -#endif /* B43_PHY_H_ */ diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c new file mode 100644 index 00000000000..0f1a84c9de6 --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.c @@ -0,0 +1,643 @@ +/* + + Broadcom B43 wireless driver + IEEE 802.11a PHY driver + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "phy_a.h" +#include "phy_common.h" +#include "wa.h" +#include "tables.h" +#include "main.h" + + +/* Get the freq, as it has to be written to the device. */ +static inline u16 channel2freq_a(u8 channel) +{ + B43_WARN_ON(channel > 200); + + return (5000 + 5 * channel); +} + +static inline u16 freq_r3A_value(u16 frequency) +{ + u16 value; + + if (frequency < 5091) + value = 0x0040; + else if (frequency < 5321) + value = 0x0000; + else if (frequency < 5806) + value = 0x0080; + else + value = 0x0040; + + return value; +} + +#if 0 +/* This function converts a TSSI value to dBm in Q5.2 */ +static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + s8 dbm = 0; + s32 tmp; + + tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi); + tmp += 0x80; + tmp = clamp_val(tmp, 0x00, 0xFF); + dbm = aphy->tssi2dbm[tmp]; + //TODO: There's a FIXME on the specs + + return dbm; +} +#endif + +void b43_radio_set_tx_iq(struct b43_wldev *dev) +{ + static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; + static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; + u16 tmp = b43_radio_read16(dev, 0x001E); + int i, j; + + for (i = 0; i < 5; i++) { + for (j = 0; j < 5; j++) { + if (tmp == (data_high[i] << 4 | data_low[j])) { + b43_phy_write(dev, 0x0069, + (i - j) << 8 | 0x00C0); + return; + } + } + } +} + +static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel) +{ + u16 freq, r8, tmp; + + freq = channel2freq_a(channel); + + r8 = b43_radio_read16(dev, 0x0008); + b43_write16(dev, 0x03F0, freq); + b43_radio_write16(dev, 0x0008, r8); + + //TODO: write max channel TX power? to Radio 0x2D + tmp = b43_radio_read16(dev, 0x002E); + tmp &= 0x0080; + //TODO: OR tmp with the Power out estimation for this channel? + b43_radio_write16(dev, 0x002E, tmp); + + if (freq >= 4920 && freq <= 5500) { + /* + * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; + * = (freq * 0.025862069 + */ + r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ + } + b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022) + & 0x000F) | (r8 << 4)); + b43_radio_write16(dev, 0x002A, (r8 << 4)); + b43_radio_write16(dev, 0x002B, (r8 << 4)); + b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008) + & 0x00F0) | (r8 << 4)); + b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029) + & 0xFF0F) | 0x00B0); + b43_radio_write16(dev, 0x0035, 0x00AA); + b43_radio_write16(dev, 0x0036, 0x0085); + b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A) + & 0xFF20) | + freq_r3A_value(freq)); + b43_radio_write16(dev, 0x003D, + b43_radio_read16(dev, 0x003D) & 0x00FF); + b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081) + & 0xFF7F) | 0x0080); + b43_radio_write16(dev, 0x0035, + b43_radio_read16(dev, 0x0035) & 0xFFEF); + b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035) + & 0xFFEF) | 0x0010); + b43_radio_set_tx_iq(dev); + //TODO: TSSI2dbm workaround +//FIXME b43_phy_xmitpower(dev); +} + +void b43_radio_init2060(struct b43_wldev *dev) +{ + b43_radio_write16(dev, 0x0004, 0x00C0); + b43_radio_write16(dev, 0x0005, 0x0008); + b43_radio_write16(dev, 0x0009, 0x0040); + b43_radio_write16(dev, 0x0005, 0x00AA); + b43_radio_write16(dev, 0x0032, 0x008F); + b43_radio_write16(dev, 0x0006, 0x008F); + b43_radio_write16(dev, 0x0034, 0x008F); + b43_radio_write16(dev, 0x002C, 0x0007); + b43_radio_write16(dev, 0x0082, 0x0080); + b43_radio_write16(dev, 0x0080, 0x0000); + b43_radio_write16(dev, 0x003F, 0x00DA); + b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); + msleep(1); /* delay 400usec */ + + b43_radio_write16(dev, 0x0081, + (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010); + msleep(1); /* delay 400usec */ + + b43_radio_write16(dev, 0x0005, + (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008); + b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010); + b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040); + b43_radio_write16(dev, 0x0081, + (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040); + b43_radio_write16(dev, 0x0005, + (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); + b43_phy_write(dev, 0x0063, 0xDDC6); + b43_phy_write(dev, 0x0069, 0x07BE); + b43_phy_write(dev, 0x006A, 0x0000); + + aphy_channel_switch(dev, dev->phy.ops->get_default_chan(dev)); + + msleep(1); +} + +static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) +{ + int i; + + if (dev->phy.rev < 3) { + if (enable) + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { + b43_ofdmtab_write16(dev, + B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, 0xFFF8); + } + else + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { + b43_ofdmtab_write16(dev, + B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); + } + } else { + if (enable) + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, 0x0820); + else + for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); + } +} + +static void b43_phy_ww(struct b43_wldev *dev) +{ + u16 b, curr_s, best_s = 0xFFFF; + int i; + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN); + b43_phy_write(dev, B43_PHY_OFDM(0x1B), + b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000); + b43_phy_write(dev, B43_PHY_OFDM(0x82), + (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300); + b43_radio_write16(dev, 0x0009, + b43_radio_read16(dev, 0x0009) | 0x0080); + b43_radio_write16(dev, 0x0012, + (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002); + b43_wa_initgains(dev); + b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); + b = b43_phy_read(dev, B43_PHY_PWRDOWN); + b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); + b43_radio_write16(dev, 0x0004, + b43_radio_read16(dev, 0x0004) | 0x0004); + for (i = 0x10; i <= 0x20; i++) { + b43_radio_write16(dev, 0x0013, i); + curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; + if (!curr_s) { + best_s = 0x0000; + break; + } else if (curr_s >= 0x0080) + curr_s = 0x0100 - curr_s; + if (curr_s < best_s) + best_s = curr_s; + } + b43_phy_write(dev, B43_PHY_PWRDOWN, b); + b43_radio_write16(dev, 0x0004, + b43_radio_read16(dev, 0x0004) & 0xFFFB); + b43_radio_write16(dev, 0x0013, best_s); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); + b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); + b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); + b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); + b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); + b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); + b43_phy_write(dev, B43_PHY_OFDM(0xBB), + (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053); + b43_phy_write(dev, B43_PHY_OFDM61, + (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120); + b43_phy_write(dev, B43_PHY_OFDM(0x13), + (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000); + b43_phy_write(dev, B43_PHY_OFDM(0x14), + (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); + for (i = 0; i < 6; i++) + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); + b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); +} + +static void hardware_pctl_init_aphy(struct b43_wldev *dev) +{ + //TODO +} + +void b43_phy_inita(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + + /* This lowlevel A-PHY init is also called from G-PHY init. + * So we must not access phy->a, if called from G-PHY code. + */ + B43_WARN_ON((phy->type != B43_PHYTYPE_A) && + (phy->type != B43_PHYTYPE_G)); + + might_sleep(); + + if (phy->rev >= 6) { + if (phy->type == B43_PHYTYPE_A) + b43_phy_write(dev, B43_PHY_OFDM(0x1B), + b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000); + if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) + b43_phy_write(dev, B43_PHY_ENCORE, + b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010); + else + b43_phy_write(dev, B43_PHY_ENCORE, + b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010); + } + + b43_wa_all(dev); + + if (phy->type == B43_PHYTYPE_A) { + if (phy->gmode && (phy->rev < 3)) + b43_phy_write(dev, 0x0034, + b43_phy_read(dev, 0x0034) | 0x0001); + b43_phy_rssiagc(dev, 0); + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); + + b43_radio_init2060(dev); + + if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + ((bus->boardinfo.type == SSB_BOARD_BU4306) || + (bus->boardinfo.type == SSB_BOARD_BU4309))) { + ; //TODO: A PHY LO + } + + if (phy->rev >= 3) + b43_phy_ww(dev); + + hardware_pctl_init_aphy(dev); + + //TODO: radar detection + } + + if ((phy->type == B43_PHYTYPE_G) && + (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { + b43_phy_write(dev, B43_PHY_OFDM(0x6E), + (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) + & 0xE000) | 0x3CF); + } +} + +/* Initialise the TSSI->dBm lookup table */ +static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + s16 pab0, pab1, pab2; + + pab0 = (s16) (dev->dev->bus->sprom.pa1b0); + pab1 = (s16) (dev->dev->bus->sprom.pa1b1); + pab2 = (s16) (dev->dev->bus->sprom.pa1b2); + + if (pab0 != 0 && pab1 != 0 && pab2 != 0 && + pab0 != -1 && pab1 != -1 && pab2 != -1) { + /* The pabX values are set in SPROM. Use them. */ + if ((s8) dev->dev->bus->sprom.itssi_a != 0 && + (s8) dev->dev->bus->sprom.itssi_a != -1) + aphy->tgt_idle_tssi = + (s8) (dev->dev->bus->sprom.itssi_a); + else + aphy->tgt_idle_tssi = 62; + aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, + pab1, pab2); + if (!aphy->tssi2dbm) + return -ENOMEM; + } else { + /* pabX values not set in SPROM, + * but APHY needs a generated table. */ + aphy->tssi2dbm = NULL; + b43err(dev->wl, "Could not generate tssi2dBm " + "table (wrong SPROM info)!\n"); + return -ENODEV; + } + + return 0; +} + +static int b43_aphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_a *aphy; + int err; + + aphy = kzalloc(sizeof(*aphy), GFP_KERNEL); + if (!aphy) + return -ENOMEM; + dev->phy.a = aphy; + + err = b43_aphy_init_tssi2dbm_table(dev); + if (err) + goto err_free_aphy; + + return 0; + +err_free_aphy: + kfree(aphy); + dev->phy.a = NULL; + + return err; +} + +static void b43_aphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + const void *tssi2dbm; + int tgt_idle_tssi; + + /* tssi2dbm table is constant, so it is initialized at alloc time. + * Save a copy of the pointer. */ + tssi2dbm = aphy->tssi2dbm; + tgt_idle_tssi = aphy->tgt_idle_tssi; + + /* Zero out the whole PHY structure. */ + memset(aphy, 0, sizeof(*aphy)); + + aphy->tssi2dbm = tssi2dbm; + aphy->tgt_idle_tssi = tgt_idle_tssi; + + //TODO init struct b43_phy_a + +} + +static void b43_aphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + + kfree(aphy->tssi2dbm); + aphy->tssi2dbm = NULL; + + kfree(aphy); + dev->phy.a = NULL; +} + +static int b43_aphy_op_init(struct b43_wldev *dev) +{ + b43_phy_inita(dev); + + return 0; +} + +static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset) +{ + /* OFDM registers are base-registers for the A-PHY. */ + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { + offset &= ~B43_PHYROUTE; + offset |= B43_PHYROUTE_BASE; + } + +#if B43_DEBUG + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { + /* Ext-G registers are only available on G-PHYs */ + b43err(dev->wl, "Invalid EXT-G PHY access at " + "0x%04X on A-PHY\n", offset); + dump_stack(); + } + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { + /* N-BMODE registers are only available on N-PHYs */ + b43err(dev->wl, "Invalid N-BMODE PHY access at " + "0x%04X on A-PHY\n", offset); + dump_stack(); + } +#endif /* B43_DEBUG */ + + return offset; +} + +static u16 b43_aphy_op_read(struct b43_wldev *dev, u16 reg) +{ + reg = adjust_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_aphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + reg = adjust_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_aphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* A-PHY needs 0x40 for read access */ + reg |= 0x40; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_aphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev) +{ + return (dev->phy.rev >= 5); +} + +static void b43_aphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + + if (state == RFKILL_STATE_UNBLOCKED) { + if (phy->radio_on) + return; + b43_radio_write16(dev, 0x0004, 0x00C0); + b43_radio_write16(dev, 0x0005, 0x0008); + b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7); + b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7); + b43_radio_init2060(dev); + } else { + b43_radio_write16(dev, 0x0004, 0x00FF); + b43_radio_write16(dev, 0x0005, 0x00FB); + b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008); + b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008); + } +} + +static int b43_aphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if (new_channel > 200) + return -EINVAL; + aphy_channel_switch(dev, new_channel); + + return 0; +} + +static unsigned int b43_aphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 36; /* Default to channel 36 */ +} + +static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{//TODO + struct b43_phy *phy = &dev->phy; + u64 hf; + u16 tmp; + int autodiv = 0; + + if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) + autodiv = 1; + + hf = b43_hf_read(dev); + hf &= ~B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); + + tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); + tmp &= ~B43_PHY_BBANDCFG_RXANT; + tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) + << B43_PHY_BBANDCFG_RXANT_SHIFT; + b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); + + if (autodiv) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + if (antenna == B43_ANTENNA_AUTO0) + tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; + else + tmp |= B43_PHY_ANTDWELL_AUTODIV1; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } + if (phy->rev < 3) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + tmp = (tmp & 0xFF00) | 0x24; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } else { + tmp = b43_phy_read(dev, B43_PHY_OFDM61); + tmp |= 0x10; + b43_phy_write(dev, B43_PHY_OFDM61, tmp); + if (phy->analog == 3) { + b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, + 0x1D); + b43_phy_write(dev, B43_PHY_ADIVRELATED, + 8); + } else { + b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, + 0x3A); + tmp = + b43_phy_read(dev, + B43_PHY_ADIVRELATED); + tmp = (tmp & 0xFF00) | 8; + b43_phy_write(dev, B43_PHY_ADIVRELATED, + tmp); + } + } + + hf |= B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); +} + +static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev) +{//TODO +} + +static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + +static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev) +{//TODO +} + +static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev) +{//TODO +} + +const struct b43_phy_operations b43_phyops_a = { + .allocate = b43_aphy_op_allocate, + .free = b43_aphy_op_free, + .prepare_structs = b43_aphy_op_prepare_structs, + .init = b43_aphy_op_init, + .phy_read = b43_aphy_op_read, + .phy_write = b43_aphy_op_write, + .radio_read = b43_aphy_op_radio_read, + .radio_write = b43_aphy_op_radio_write, + .supports_hwpctl = b43_aphy_op_supports_hwpctl, + .software_rfkill = b43_aphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_aphy_op_switch_channel, + .get_default_chan = b43_aphy_op_get_default_chan, + .set_rx_antenna = b43_aphy_op_set_rx_antenna, + .recalc_txpower = b43_aphy_op_recalc_txpower, + .adjust_txpower = b43_aphy_op_adjust_txpower, + .pwork_15sec = b43_aphy_op_pwork_15sec, + .pwork_60sec = b43_aphy_op_pwork_60sec, +}; diff --git a/drivers/net/wireless/b43/phy_a.h b/drivers/net/wireless/b43/phy_a.h new file mode 100644 index 00000000000..5cfaab7b16e --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.h @@ -0,0 +1,130 @@ +#ifndef LINUX_B43_PHY_A_H_ +#define LINUX_B43_PHY_A_H_ + +#include "phy_common.h" + + +/* OFDM (A) PHY Registers */ +#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ +#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ +#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ +#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 +#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ +#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ +#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ +#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ +#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ +#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) +#define B43_PHY_CRS0_EN 0x4000 +#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) +#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ +#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ +#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ +#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ +#define B43_PHY_LMS B43_PHY_OFDM(0x55) +#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ +#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ +#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ +#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ +#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ +#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ +#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ +#define B43_PHY_OTABLENR_SHIFT 10 +#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ +#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ +#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ +#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ +#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) +#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ +#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ +#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ +#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ +#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ +#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ +#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) +#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) +#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) +#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) +#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) +#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ +#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ +#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ +#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) +#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) +#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) +#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ +#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ +#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ +#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ +#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ +#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ +#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ + +/*** OFDM table numbers ***/ +#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) +#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename +#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) +#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) +#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) +#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) +#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) +#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) +#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) +#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) +#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) +#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) +#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) +#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) +#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename +#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename +#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) +#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) +#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename +#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) +#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! +#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) +#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) +#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) +#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) +#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) + +u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, + u16 offset, u16 value); +u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, + u16 offset, u32 value); + + +struct b43_phy_a { + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi;//FIXME value currently not set + + /* A-PHY TX Power control value. */ + u16 txpwr_offset; + + //TODO lots of missing stuff +}; + +/** + * b43_phy_inita - Lowlevel A-PHY init routine. + * This is _only_ used by the G-PHY code. + */ +void b43_phy_inita(struct b43_wldev *dev); + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_a; + +#endif /* LINUX_B43_PHY_A_H_ */ diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c new file mode 100644 index 00000000000..af37abccccb --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.c @@ -0,0 +1,381 @@ +/* + + Broadcom B43 wireless driver + Common PHY routines + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "phy_common.h" +#include "phy_g.h" +#include "phy_a.h" +#include "phy_n.h" +#include "phy_lp.h" +#include "b43.h" +#include "main.h" + + +int b43_phy_allocate(struct b43_wldev *dev) +{ + struct b43_phy *phy = &(dev->phy); + int err; + + phy->ops = NULL; + + switch (phy->type) { + case B43_PHYTYPE_A: + phy->ops = &b43_phyops_a; + break; + case B43_PHYTYPE_G: + phy->ops = &b43_phyops_g; + break; + case B43_PHYTYPE_N: +#ifdef CONFIG_B43_NPHY + phy->ops = &b43_phyops_n; +#endif + break; + case B43_PHYTYPE_LP: +#ifdef CONFIG_B43_PHY_LP + phy->ops = &b43_phyops_lp; +#endif + break; + } + if (B43_WARN_ON(!phy->ops)) + return -ENODEV; + + err = phy->ops->allocate(dev); + if (err) + phy->ops = NULL; + + return err; +} + +void b43_phy_free(struct b43_wldev *dev) +{ + dev->phy.ops->free(dev); + dev->phy.ops = NULL; +} + +int b43_phy_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = phy->ops; + int err; + + phy->channel = ops->get_default_chan(dev); + + ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + err = ops->init(dev); + if (err) { + b43err(dev->wl, "PHY init failed\n"); + goto err_block_rf; + } + /* Make sure to switch hardware and firmware (SHM) to + * the default channel. */ + err = b43_switch_channel(dev, ops->get_default_chan(dev)); + if (err) { + b43err(dev->wl, "PHY init: Channel switch to default failed\n"); + goto err_phy_exit; + } + + return 0; + +err_phy_exit: + if (ops->exit) + ops->exit(dev); +err_block_rf: + ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + + return err; +} + +void b43_phy_exit(struct b43_wldev *dev) +{ + const struct b43_phy_operations *ops = dev->phy.ops; + + ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + if (ops->exit) + ops->exit(dev); +} + +bool b43_has_hardware_pctl(struct b43_wldev *dev) +{ + if (!dev->phy.hardware_power_control) + return 0; + if (!dev->phy.ops->supports_hwpctl) + return 0; + return dev->phy.ops->supports_hwpctl(dev); +} + +void b43_radio_lock(struct b43_wldev *dev) +{ + u32 macctl; + + macctl = b43_read32(dev, B43_MMIO_MACCTL); + B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); + macctl |= B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); + /* Commit the write and wait for the device + * to exit any radio register access. */ + b43_read32(dev, B43_MMIO_MACCTL); + udelay(10); +} + +void b43_radio_unlock(struct b43_wldev *dev) +{ + u32 macctl; + + /* Commit any write */ + b43_read16(dev, B43_MMIO_PHY_VER); + /* unlock */ + macctl = b43_read32(dev, B43_MMIO_MACCTL); + B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); + macctl &= ~B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); +} + +void b43_phy_lock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(dev->phy.phy_locked); + dev->phy.phy_locked = 1; +#endif + B43_WARN_ON(dev->dev->id.revision < 3); + + if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) + b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); +} + +void b43_phy_unlock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(!dev->phy.phy_locked); + dev->phy.phy_locked = 0; +#endif + B43_WARN_ON(dev->dev->id.revision < 3); + + if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) + b43_power_saving_ctl_bits(dev, 0); +} + +u16 b43_radio_read(struct b43_wldev *dev, u16 reg) +{ + return dev->phy.ops->radio_read(dev, reg); +} + +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + dev->phy.ops->radio_write(dev, reg, value); +} + +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) & mask); +} + +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) | set); +} + +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_radio_write16(dev, offset, + (b43_radio_read16(dev, offset) & mask) | set); +} + +u16 b43_phy_read(struct b43_wldev *dev, u16 reg) +{ + return dev->phy.ops->phy_read(dev, reg); +} + +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + dev->phy.ops->phy_write(dev, reg, value); +} + +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) & mask); +} + +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) | set); +} + +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_phy_write(dev, offset, + (b43_phy_read(dev, offset) & mask) | set); +} + +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) +{ + struct b43_phy *phy = &(dev->phy); + u16 channelcookie, savedcookie; + int err; + + if (new_channel == B43_DEFAULT_CHANNEL) + new_channel = phy->ops->get_default_chan(dev); + + /* First we set the channel radio code to prevent the + * firmware from sending ghost packets. + */ + channelcookie = new_channel; + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) + channelcookie |= 0x100; + //FIXME set 40Mhz flag if required + savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); + + /* Now try to switch the PHY hardware channel. */ + err = phy->ops->switch_channel(dev, new_channel); + if (err) + goto err_restore_cookie; + + dev->phy.channel = new_channel; + /* Wait for the radio to tune to the channel and stabilize. */ + msleep(8); + + return 0; + +err_restore_cookie: + b43_shm_write16(dev, B43_SHM_SHARED, + B43_SHM_SH_CHAN, savedcookie); + + return err; +} + +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + + if (state == RFKILL_STATE_HARD_BLOCKED) { + /* We cannot hardware-block the device */ + state = RFKILL_STATE_SOFT_BLOCKED; + } + + phy->ops->software_rfkill(dev, state); + phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); +} + +/** + * b43_phy_txpower_adjust_work - TX power workqueue. + * + * Workqueue for updating the TX power parameters in hardware. + */ +void b43_phy_txpower_adjust_work(struct work_struct *work) +{ + struct b43_wl *wl = container_of(work, struct b43_wl, + txpower_adjust_work); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + + if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED))) + dev->phy.ops->adjust_txpower(dev); + + mutex_unlock(&wl->mutex); +} + +/* Called with wl->irq_lock locked */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) +{ + struct b43_phy *phy = &dev->phy; + unsigned long now = jiffies; + enum b43_txpwr_result result; + + if (!(flags & B43_TXPWR_IGNORE_TIME)) { + /* Check if it's time for a TXpower check. */ + if (time_before(now, phy->next_txpwr_check_time)) + return; /* Not yet */ + } + /* The next check will be needed in two seconds, or later. */ + phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); + + if ((dev->dev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->bus->boardinfo.type == SSB_BOARD_BU4306)) + return; /* No software txpower adjustment needed */ + + result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); + if (result == B43_TXPWR_RES_DONE) + return; /* We are done. */ + B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST); + B43_WARN_ON(phy->ops->adjust_txpower == NULL); + + /* We must adjust the transmission power in hardware. + * Schedule b43_phy_txpower_adjust_work(). */ + queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work); +} + +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset) +{ + const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK); + unsigned int a, b, c, d; + unsigned int average; + u32 tmp; + + tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset); + a = tmp & 0xFF; + b = (tmp >> 8) & 0xFF; + c = (tmp >> 16) & 0xFF; + d = (tmp >> 24) & 0xFF; + if (a == 0 || a == B43_TSSI_MAX || + b == 0 || b == B43_TSSI_MAX || + c == 0 || c == B43_TSSI_MAX || + d == 0 || d == B43_TSSI_MAX) + return -ENOENT; + /* The values are OK. Clear them. */ + tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) | + (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24); + b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp); + + if (is_ofdm) { + a = (a + 32) & 0x3F; + b = (b + 32) & 0x3F; + c = (c + 32) & 0x3F; + d = (d + 32) & 0x3F; + } + + /* Get the average of the values with 0.5 added to each value. */ + average = (a + b + c + d + 2) / 4; + if (is_ofdm) { + /* Adjust for CCK-boost */ + if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO) + & B43_HF_CCKBOOST) + average = (average >= 13) ? (average - 13) : 0; + } + + return average; +} + +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on) +{ + b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); +} diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h new file mode 100644 index 00000000000..c9f5430d1d7 --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.h @@ -0,0 +1,413 @@ +#ifndef LINUX_B43_PHY_COMMON_H_ +#define LINUX_B43_PHY_COMMON_H_ + +#include <linux/rfkill.h> + +struct b43_wldev; + + +/* PHY register routing bits */ +#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ +#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ +#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ +#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ +#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ + +/* CCK (B-PHY) registers. */ +#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY registers. */ +#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY BMODE registers. */ +#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) +/* OFDM (A-PHY) registers. */ +#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) +/* Extended G-PHY registers. */ +#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) + + +/* Masks for the PHY versioning registers. */ +#define B43_PHYVER_ANALOG 0xF000 +#define B43_PHYVER_ANALOG_SHIFT 12 +#define B43_PHYVER_TYPE 0x0F00 +#define B43_PHYVER_TYPE_SHIFT 8 +#define B43_PHYVER_VERSION 0x00FF + +/** + * enum b43_interference_mitigation - Interference Mitigation mode + * + * @B43_INTERFMODE_NONE: Disabled + * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation + * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation + * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation + */ +enum b43_interference_mitigation { + B43_INTERFMODE_NONE, + B43_INTERFMODE_NONWLAN, + B43_INTERFMODE_MANUALWLAN, + B43_INTERFMODE_AUTOWLAN, +}; + +/* Antenna identifiers */ +enum { + B43_ANTENNA0, /* Antenna 0 */ + B43_ANTENNA1, /* Antenna 0 */ + B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ + B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ + B43_ANTENNA2, + B43_ANTENNA3 = 8, + + B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, + B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, +}; + +/** + * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. + * + * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. + * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. + */ +enum b43_txpwr_result { + B43_TXPWR_RES_NEED_ADJUST, + B43_TXPWR_RES_DONE, +}; + +/** + * struct b43_phy_operations - Function pointers for PHY ops. + * + * @allocate: Allocate and initialise the PHY data structures. + * Must not be NULL. + * @free: Destroy and free the PHY data structures. + * Must not be NULL. + * + * @prepare_structs: Prepare the PHY data structures. + * The data structures allocated in @allocate are + * initialized here. + * Must not be NULL. + * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to + * do some early early PHY hardware init. + * Can be NULL, if not required. + * @init: Initialize the PHY. + * Must not be NULL. + * @exit: Shutdown the PHY. + * Can be NULL, if not required. + * + * @phy_read: Read from a PHY register. + * Must not be NULL. + * @phy_write: Write to a PHY register. + * Must not be NULL. + * @radio_read: Read from a Radio register. + * Must not be NULL. + * @radio_write: Write to a Radio register. + * Must not be NULL. + * + * @supports_hwpctl: Returns a boolean whether Hardware Power Control + * is supported or not. + * If NULL, hwpctl is assumed to be never supported. + * @software_rfkill: Turn the radio ON or OFF. + * Possible state values are + * RFKILL_STATE_SOFT_BLOCKED or + * RFKILL_STATE_UNBLOCKED + * Must not be NULL. + * @switch_analog: Turn the Analog on/off. + * Must not be NULL. + * @switch_channel: Switch the radio to another channel. + * Must not be NULL. + * @get_default_chan: Just returns the default channel number. + * Must not be NULL. + * @set_rx_antenna: Set the antenna used for RX. + * Can be NULL, if not supported. + * @interf_mitigation: Switch the Interference Mitigation mode. + * Can be NULL, if not supported. + * + * @recalc_txpower: Recalculate the transmission power parameters. + * This callback has to recalculate the TX power settings, + * but does not need to write them to the hardware, yet. + * Returns enum b43_txpwr_result to indicate whether the hardware + * needs to be adjusted. + * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower + * will be called later. + * If the parameter "ignore_tssi" is true, the TSSI values should + * be ignored and a recalculation of the power settings should be + * done even if the TSSI values did not change. + * This callback is called with wl->irq_lock held and must not sleep. + * Must not be NULL. + * @adjust_txpower: Write the previously calculated TX power settings + * (from @recalc_txpower) to the hardware. + * This function may sleep. + * Can be NULL, if (and ONLY if) @recalc_txpower _always_ + * returns B43_TXPWR_RES_DONE. + * + * @pwork_15sec: Periodic work. Called every 15 seconds. + * Can be NULL, if not required. + * @pwork_60sec: Periodic work. Called every 60 seconds. + * Can be NULL, if not required. + */ +struct b43_phy_operations { + /* Initialisation */ + int (*allocate)(struct b43_wldev *dev); + void (*free)(struct b43_wldev *dev); + void (*prepare_structs)(struct b43_wldev *dev); + int (*prepare_hardware)(struct b43_wldev *dev); + int (*init)(struct b43_wldev *dev); + void (*exit)(struct b43_wldev *dev); + + /* Register access */ + u16 (*phy_read)(struct b43_wldev *dev, u16 reg); + void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value); + u16 (*radio_read)(struct b43_wldev *dev, u16 reg); + void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value); + + /* Radio */ + bool (*supports_hwpctl)(struct b43_wldev *dev); + void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state); + void (*switch_analog)(struct b43_wldev *dev, bool on); + int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); + unsigned int (*get_default_chan)(struct b43_wldev *dev); + void (*set_rx_antenna)(struct b43_wldev *dev, int antenna); + int (*interf_mitigation)(struct b43_wldev *dev, + enum b43_interference_mitigation new_mode); + + /* Transmission power adjustment */ + enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, + bool ignore_tssi); + void (*adjust_txpower)(struct b43_wldev *dev); + + /* Misc */ + void (*pwork_15sec)(struct b43_wldev *dev); + void (*pwork_60sec)(struct b43_wldev *dev); +}; + +struct b43_phy_a; +struct b43_phy_g; +struct b43_phy_n; +struct b43_phy_lp; + +struct b43_phy { + /* Hardware operation callbacks. */ + const struct b43_phy_operations *ops; + + /* Most hardware context information is stored in the standard- + * specific data structures pointed to by the pointers below. + * Only one of them is valid (the currently enabled PHY). */ +#ifdef CONFIG_B43_DEBUG + /* No union for debug build to force NULL derefs in buggy code. */ + struct { +#else + union { +#endif + /* A-PHY specific information */ + struct b43_phy_a *a; + /* G-PHY specific information */ + struct b43_phy_g *g; + /* N-PHY specific information */ + struct b43_phy_n *n; + /* LP-PHY specific information */ + struct b43_phy_lp *lp; + }; + + /* Band support flags. */ + bool supports_2ghz; + bool supports_5ghz; + + /* GMODE bit enabled? */ + bool gmode; + + /* Analog Type */ + u8 analog; + /* B43_PHYTYPE_ */ + u8 type; + /* PHY revision number. */ + u8 rev; + + /* Radio versioning */ + u16 radio_manuf; /* Radio manufacturer */ + u16 radio_ver; /* Radio version */ + u8 radio_rev; /* Radio revision */ + + /* Software state of the radio */ + bool radio_on; + + /* Desired TX power level (in dBm). + * This is set by the user and adjusted in b43_phy_xmitpower(). */ + int desired_txpower; + + /* Hardware Power Control enabled? */ + bool hardware_power_control; + + /* The time (in absolute jiffies) when the next TX power output + * check is needed. */ + unsigned long next_txpwr_check_time; + + /* current channel */ + unsigned int channel; + + /* PHY TX errors counter. */ + atomic_t txerr_cnt; + +#ifdef CONFIG_B43_DEBUG + /* PHY registers locked by b43_phy_lock()? */ + bool phy_locked; +#endif /* B43_DEBUG */ +}; + + +/** + * b43_phy_allocate - Allocate PHY structs + * Allocate the PHY data structures, based on the current dev->phy.type + */ +int b43_phy_allocate(struct b43_wldev *dev); + +/** + * b43_phy_free - Free PHY structs + */ +void b43_phy_free(struct b43_wldev *dev); + +/** + * b43_phy_init - Initialise the PHY + */ +int b43_phy_init(struct b43_wldev *dev); + +/** + * b43_phy_exit - Cleanup PHY + */ +void b43_phy_exit(struct b43_wldev *dev); + +/** + * b43_has_hardware_pctl - Hardware Power Control supported? + * Returns a boolean, whether hardware power control is supported. + */ +bool b43_has_hardware_pctl(struct b43_wldev *dev); + +/** + * b43_phy_read - 16bit PHY register read access + */ +u16 b43_phy_read(struct b43_wldev *dev, u16 reg); + +/** + * b43_phy_write - 16bit PHY register write access + */ +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value); + +/** + * b43_phy_mask - Mask a PHY register with a mask + */ +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_phy_set - OR a PHY register with a bitmap + */ +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap + */ +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_read - 16bit Radio register read access + */ +u16 b43_radio_read(struct b43_wldev *dev, u16 reg); +#define b43_radio_read16 b43_radio_read /* DEPRECATED */ + +/** + * b43_radio_write - 16bit Radio register write access + */ +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value); +#define b43_radio_write16 b43_radio_write /* DEPRECATED */ + +/** + * b43_radio_mask - Mask a 16bit radio register with a mask + */ +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_radio_set - OR a 16bit radio register with a bitmap + */ +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap + */ +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_lock - Lock firmware radio register access + */ +void b43_radio_lock(struct b43_wldev *dev); + +/** + * b43_radio_unlock - Unlock firmware radio register access + */ +void b43_radio_unlock(struct b43_wldev *dev); + +/** + * b43_phy_lock - Lock firmware PHY register access + */ +void b43_phy_lock(struct b43_wldev *dev); + +/** + * b43_phy_unlock - Unlock firmware PHY register access + */ +void b43_phy_unlock(struct b43_wldev *dev); + +/** + * b43_switch_channel - Switch to another channel + */ +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); +/** + * B43_DEFAULT_CHANNEL - Switch to the default channel. + */ +#define B43_DEFAULT_CHANNEL UINT_MAX + +/** + * b43_software_rfkill - Turn the radio ON or OFF in software. + */ +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); + +/** + * b43_phy_txpower_check - Check TX power output. + * + * Compare the current TX power output to the desired power emission + * and schedule an adjustment in case it mismatches. + * Requires wl->irq_lock locked. + * + * @flags: OR'ed enum b43_phy_txpower_check_flags flags. + * See the docs below. + */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); +/** + * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() + * + * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo + * the check now. + * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average + * TSSI did not change. + */ +enum b43_phy_txpower_check_flags { + B43_TXPWR_IGNORE_TIME = (1 << 0), + B43_TXPWR_IGNORE_TSSI = (1 << 1), +}; + +struct work_struct; +void b43_phy_txpower_adjust_work(struct work_struct *work); + +/** + * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. + * + * @shm_offset: The SHM address to read the values from. + * + * Returns the average of the 4 TSSI values, or a negative error code. + */ +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); + +/** + * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog. + * + * It does the switching based on the PHY0 core register. + * Do _not_ call this directly. Only use it as a switch_analog callback + * for struct b43_phy_operations. + */ +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on); + + +#endif /* LINUX_B43_PHY_COMMON_H_ */ diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy_g.c index 305d4cd6fd0..232181f6333 100644 --- a/drivers/net/wireless/b43/phy.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -1,10 +1,11 @@ /* Broadcom B43 wireless driver + IEEE 802.11g PHY driver Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> - Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> @@ -25,38 +26,14 @@ */ -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/types.h> -#include <linux/bitrev.h> - #include "b43.h" -#include "phy.h" -#include "nphy.h" -#include "main.h" -#include "tables.h" +#include "phy_g.h" +#include "phy_common.h" #include "lo.h" -#include "wa.h" - - -static const s8 b43_tssi2dbm_b_table[] = { - 0x4D, 0x4C, 0x4B, 0x4A, - 0x4A, 0x49, 0x48, 0x47, - 0x47, 0x46, 0x45, 0x45, - 0x44, 0x43, 0x42, 0x42, - 0x41, 0x40, 0x3F, 0x3E, - 0x3D, 0x3C, 0x3B, 0x3A, - 0x39, 0x38, 0x37, 0x36, - 0x35, 0x34, 0x32, 0x31, - 0x30, 0x2F, 0x2D, 0x2C, - 0x2B, 0x29, 0x28, 0x26, - 0x25, 0x23, 0x21, 0x1F, - 0x1D, 0x1A, 0x17, 0x14, - 0x10, 0x0C, 0x06, 0x00, - -7, -7, -7, -7, - -7, -7, -7, -7, - -7, -7, -7, -7, -}; +#include "main.h" + +#include <linux/bitrev.h> + static const s8 b43_tssi2dbm_g_table[] = { 77, 77, 77, 76, @@ -84,8 +61,20 @@ const u8 b43_radio_channel_codes_bg[] = { 72, 84, }; + +static void b43_calc_nrssi_threshold(struct b43_wldev *dev); + + #define bitrev4(tmp) (bitrev8(tmp) >> 4) -static void b43_phy_initg(struct b43_wldev *dev); + + +/* Get the freq, as it has to be written to the device. */ +static inline u16 channel2freq_bg(u8 channel) +{ + B43_WARN_ON(!(channel >= 1 && channel <= 14)); + + return b43_radio_channel_codes_bg[channel - 1]; +} static void generate_rfatt_list(struct b43_wldev *dev, struct b43_rfatt_list *list) @@ -130,7 +119,7 @@ static void generate_rfatt_list(struct b43_wldev *dev, {.att = 9,.with_padmix = 1,}, }; - if (!b43_has_hardware_pctl(phy)) { + if (!b43_has_hardware_pctl(dev)) { /* Software pctl */ list->list = rfatt_0; list->len = ARRAY_SIZE(rfatt_0); @@ -174,140 +163,55 @@ static void generate_bbatt_list(struct b43_wldev *dev, list->max_val = 8; } -bool b43_has_hardware_pctl(struct b43_phy *phy) -{ - if (!phy->hardware_power_control) - return 0; - switch (phy->type) { - case B43_PHYTYPE_A: - if (phy->rev >= 5) - return 1; - break; - case B43_PHYTYPE_G: - if (phy->rev >= 6) - return 1; - break; - default: - B43_WARN_ON(1); - } - return 0; -} - static void b43_shm_clear_tssi(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - - switch (phy->type) { - case B43_PHYTYPE_A: - b43_shm_write16(dev, B43_SHM_SHARED, 0x0068, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x006a, 0x7F7F); - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); - break; - } -} - -/* Lock the PHY registers against concurrent access from the microcode. - * This lock is nonrecursive. */ -void b43_phy_lock(struct b43_wldev *dev) -{ -#if B43_DEBUG - B43_WARN_ON(dev->phy.phy_locked); - dev->phy.phy_locked = 1; -#endif - B43_WARN_ON(dev->dev->id.revision < 3); - - if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) - b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); } -void b43_phy_unlock(struct b43_wldev *dev) +/* Synthetic PU workaround */ +static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) { -#if B43_DEBUG - B43_WARN_ON(!dev->phy.phy_locked); - dev->phy.phy_locked = 0; -#endif - B43_WARN_ON(dev->dev->id.revision < 3); + struct b43_phy *phy = &dev->phy; - if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) - b43_power_saving_ctl_bits(dev, 0); -} + might_sleep(); -/* Different PHYs require different register routing flags. - * This adjusts (and does sanity checks on) the routing flags. - */ -static inline u16 adjust_phyreg_for_phytype(struct b43_phy *phy, - u16 offset, struct b43_wldev *dev) -{ - if (phy->type == B43_PHYTYPE_A) { - /* OFDM registers are base-registers for the A-PHY. */ - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { - offset &= ~B43_PHYROUTE; - offset |= B43_PHYROUTE_BASE; - } + if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { + /* We do not need the workaround. */ + return; } -#if B43_DEBUG - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { - /* Ext-G registers are only available on G-PHYs */ - if (phy->type != B43_PHYTYPE_G) { - b43err(dev->wl, "Invalid EXT-G PHY access at " - "0x%04X on PHY type %u\n", offset, phy->type); - dump_stack(); - } - } - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { - /* N-BMODE registers are only available on N-PHYs */ - if (phy->type != B43_PHYTYPE_N) { - b43err(dev->wl, "Invalid N-BMODE PHY access at " - "0x%04X on PHY type %u\n", offset, phy->type); - dump_stack(); - } + if (channel <= 10) { + b43_write16(dev, B43_MMIO_CHANNEL, + channel2freq_bg(channel + 4)); + } else { + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); } -#endif /* B43_DEBUG */ - - return offset; -} - -u16 b43_phy_read(struct b43_wldev * dev, u16 offset) -{ - struct b43_phy *phy = &dev->phy; - - offset = adjust_phyreg_for_phytype(phy, offset, dev); - b43_write16(dev, B43_MMIO_PHY_CONTROL, offset); - return b43_read16(dev, B43_MMIO_PHY_DATA); + msleep(1); + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); } -void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val) +/* Set the baseband attenuation value on chip. */ +void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, + u16 baseband_attenuation) { struct b43_phy *phy = &dev->phy; - offset = adjust_phyreg_for_phytype(phy, offset, dev); - b43_write16(dev, B43_MMIO_PHY_CONTROL, offset); - b43_write16(dev, B43_MMIO_PHY_DATA, val); -} - -void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) -{ - b43_phy_write(dev, offset, - b43_phy_read(dev, offset) & mask); -} - -void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) -{ - b43_phy_write(dev, offset, - b43_phy_read(dev, offset) | set); -} - -void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) -{ - b43_phy_write(dev, offset, - (b43_phy_read(dev, offset) & mask) | set); + if (phy->analog == 0) { + b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) + & 0xFFF0) | + baseband_attenuation); + } else if (phy->analog > 1) { + b43_phy_write(dev, B43_PHY_DACCTL, + (b43_phy_read(dev, B43_PHY_DACCTL) + & 0xFFC3) | (baseband_attenuation << 2)); + } else { + b43_phy_write(dev, B43_PHY_DACCTL, + (b43_phy_read(dev, B43_PHY_DACCTL) + & 0xFF87) | (baseband_attenuation << 3)); + } } /* Adjust the transmission power output (G-PHY) */ @@ -316,7 +220,8 @@ void b43_set_txpower_g(struct b43_wldev *dev, const struct b43_rfatt *rfatt, u8 tx_control) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 bb, rf; u16 tx_bias, tx_magn; @@ -327,11 +232,12 @@ void b43_set_txpower_g(struct b43_wldev *dev, if (unlikely(tx_bias == 0xFF)) tx_bias = 0; - /* Save the values for later */ - phy->tx_control = tx_control; - memcpy(&phy->rfatt, rfatt, sizeof(*rfatt)); - phy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); - memcpy(&phy->bbatt, bbatt, sizeof(*bbatt)); + /* Save the values for later. Use memmove, because it's valid + * to pass &gphy->rfatt as rfatt pointer argument. Same for bbatt. */ + gphy->tx_control = tx_control; + memmove(&gphy->rfatt, rfatt, sizeof(*rfatt)); + gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); + memmove(&gphy->bbatt, bbatt, sizeof(*bbatt)); if (b43_debug(dev, B43_DBG_XMITPOWER)) { b43dbg(dev->wl, "Tuning TX-power to bbatt(%u), " @@ -340,7 +246,7 @@ void b43_set_txpower_g(struct b43_wldev *dev, bb, rf, tx_control, tx_bias, tx_magn); } - b43_phy_set_baseband_attenuation(dev, bb); + b43_gphy_set_baseband_attenuation(dev, bb); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_RFATT, rf); if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { b43_radio_write16(dev, 0x43, @@ -358,179 +264,23 @@ void b43_set_txpower_g(struct b43_wldev *dev, b43_radio_write16(dev, 0x52, (b43_radio_read16(dev, 0x52) & 0xFFF0) | (tx_bias & 0x000F)); } - if (phy->type == B43_PHYTYPE_G) - b43_lo_g_adjust(dev); -} - -static void default_baseband_attenuation(struct b43_wldev *dev, - struct b43_bbatt *bb) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) - bb->att = 0; - else - bb->att = 2; -} - -static void default_radio_attenuation(struct b43_wldev *dev, - struct b43_rfatt *rf) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - rf->with_padmix = 0; - - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BCM4309G) { - if (bus->boardinfo.rev < 0x43) { - rf->att = 2; - return; - } else if (bus->boardinfo.rev < 0x51) { - rf->att = 3; - return; - } - } - - if (phy->type == B43_PHYTYPE_A) { - rf->att = 0x60; - return; - } - - switch (phy->radio_ver) { - case 0x2053: - switch (phy->radio_rev) { - case 1: - rf->att = 6; - return; - } - break; - case 0x2050: - switch (phy->radio_rev) { - case 0: - rf->att = 5; - return; - case 1: - if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 3; - else if (bus->boardinfo.vendor == - SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == - SSB_BOARD_BU4306) - rf->att = 3; - else - rf->att = 1; - } else { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 7; - else - rf->att = 6; - } - return; - case 2: - if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 3; - else if (bus->boardinfo.vendor == - SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == - SSB_BOARD_BU4306) - rf->att = 5; - else if (bus->chip_id == 0x4320) - rf->att = 4; - else - rf->att = 3; - } else - rf->att = 6; - return; - case 3: - rf->att = 5; - return; - case 4: - case 5: - rf->att = 1; - return; - case 6: - case 7: - rf->att = 5; - return; - case 8: - rf->att = 0xA; - rf->with_padmix = 1; - return; - case 9: - default: - rf->att = 5; - return; - } - } - rf->att = 5; -} - -static u16 default_tx_control(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->radio_ver != 0x2050) - return 0; - if (phy->radio_rev == 1) - return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; - if (phy->radio_rev < 6) - return B43_TXCTL_PA2DB; - if (phy->radio_rev == 8) - return B43_TXCTL_TXMIX; - return 0; -} - -/* This func is called "PHY calibrate" in the specs... */ -void b43_phy_early_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; - - default_baseband_attenuation(dev, &phy->bbatt); - default_radio_attenuation(dev, &phy->rfatt); - phy->tx_control = (default_tx_control(dev) << 4); - - /* Commit previous writes */ - b43_read32(dev, B43_MMIO_MACCTL); - - if (phy->type == B43_PHYTYPE_B || phy->type == B43_PHYTYPE_G) { - generate_rfatt_list(dev, &lo->rfatt_list); - generate_bbatt_list(dev, &lo->bbatt_list); - } - if (phy->type == B43_PHYTYPE_G && phy->rev == 1) { - /* Workaround: Temporarly disable gmode through the early init - * phase, as the gmode stuff is not needed for phy rev 1 */ - phy->gmode = 0; - b43_wireless_core_reset(dev, 0); - b43_phy_initg(dev); - phy->gmode = 1; - b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); - } + b43_lo_g_adjust(dev); } /* GPHY_TSSI_Power_Lookup_Table_Init */ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; int i; u16 value; for (i = 0; i < 32; i++) - b43_ofdmtab_write16(dev, 0x3C20, i, phy->tssi2dbm[i]); + b43_ofdmtab_write16(dev, 0x3C20, i, gphy->tssi2dbm[i]); for (i = 32; i < 64; i++) - b43_ofdmtab_write16(dev, 0x3C00, i - 32, phy->tssi2dbm[i]); + b43_ofdmtab_write16(dev, 0x3C00, i - 32, gphy->tssi2dbm[i]); for (i = 0; i < 64; i += 2) { - value = (u16) phy->tssi2dbm[i]; - value |= ((u16) phy->tssi2dbm[i + 1]) << 8; + value = (u16) gphy->tssi2dbm[i]; + value |= ((u16) gphy->tssi2dbm[i + 1]) << 8; b43_phy_write(dev, 0x380 + (i / 2), value); } } @@ -539,7 +289,8 @@ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) static void b43_gphy_gain_lt_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 nr_written = 0; u16 tmp; u8 rf, bb; @@ -561,1509 +312,6 @@ static void b43_gphy_gain_lt_init(struct b43_wldev *dev) } } -static void hardware_pctl_init_aphy(struct b43_wldev *dev) -{ - //TODO -} - -static void hardware_pctl_init_gphy(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0) - | (phy->tgt_idle_tssi - phy->cur_idle_tssi)); - b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00) - | (phy->tgt_idle_tssi - phy->cur_idle_tssi)); - b43_gphy_tssi_power_lt_init(dev); - b43_gphy_gain_lt_init(dev); - b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF); - b43_phy_write(dev, 0x0014, 0x0000); - - B43_WARN_ON(phy->rev < 6); - b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) - | 0x0800); - b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) - & 0xFEFF); - b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) - & 0xFFBF); - - b43_gphy_dc_lt_init(dev, 1); -} - -/* HardwarePowerControl init for A and G PHY */ -static void b43_hardware_pctl_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (!b43_has_hardware_pctl(phy)) { - /* No hardware power control */ - b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); - return; - } - /* Init the hwpctl related hardware */ - switch (phy->type) { - case B43_PHYTYPE_A: - hardware_pctl_init_aphy(dev); - break; - case B43_PHYTYPE_G: - hardware_pctl_init_gphy(dev); - break; - default: - B43_WARN_ON(1); - } - /* Enable hardware pctl in firmware. */ - b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); -} - -static void b43_hardware_pctl_early_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (!b43_has_hardware_pctl(phy)) { - b43_phy_write(dev, 0x047A, 0xC111); - return; - } - - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF); - b43_phy_write(dev, 0x002F, 0x0202); - b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002); - b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000); - if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { - b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) - & 0xFF0F) | 0x0010); - b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) - | 0x8000); - b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) - & 0xFFC0) | 0x0010); - b43_phy_write(dev, 0x002E, 0xC07F); - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0400); - } else { - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0200); - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0400); - b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) - & 0x7FFF); - b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F) - & 0xFFFE); - b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) - & 0xFFC0) | 0x0010); - b43_phy_write(dev, 0x002E, 0xC07F); - b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) - & 0xFF0F) | 0x0010); - } -} - -/* Intialize B/G PHY power control - * as described in http://bcm-specs.sipsolutions.net/InitPowerControl - */ -static void b43_phy_init_pctl(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - struct b43_rfatt old_rfatt; - struct b43_bbatt old_bbatt; - u8 old_tx_control = 0; - - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; - - b43_phy_write(dev, 0x0028, 0x8018); - - /* This does something with the Analog... */ - b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) - & 0xFFDF); - - if (phy->type == B43_PHYTYPE_G && !phy->gmode) - return; - b43_hardware_pctl_early_init(dev); - if (phy->cur_idle_tssi == 0) { - if (phy->radio_ver == 0x2050 && phy->analog == 0) { - b43_radio_write16(dev, 0x0076, - (b43_radio_read16(dev, 0x0076) - & 0x00F7) | 0x0084); - } else { - struct b43_rfatt rfatt; - struct b43_bbatt bbatt; - - memcpy(&old_rfatt, &phy->rfatt, sizeof(old_rfatt)); - memcpy(&old_bbatt, &phy->bbatt, sizeof(old_bbatt)); - old_tx_control = phy->tx_control; - - bbatt.att = 11; - if (phy->radio_rev == 8) { - rfatt.att = 15; - rfatt.with_padmix = 1; - } else { - rfatt.att = 9; - rfatt.with_padmix = 0; - } - b43_set_txpower_g(dev, &bbatt, &rfatt, 0); - } - b43_dummy_transmission(dev); - phy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); - if (B43_DEBUG) { - /* Current-Idle-TSSI sanity check. */ - if (abs(phy->cur_idle_tssi - phy->tgt_idle_tssi) >= 20) { - b43dbg(dev->wl, - "!WARNING! Idle-TSSI phy->cur_idle_tssi " - "measuring failed. (cur=%d, tgt=%d). Disabling TX power " - "adjustment.\n", phy->cur_idle_tssi, - phy->tgt_idle_tssi); - phy->cur_idle_tssi = 0; - } - } - if (phy->radio_ver == 0x2050 && phy->analog == 0) { - b43_radio_write16(dev, 0x0076, - b43_radio_read16(dev, 0x0076) - & 0xFF7B); - } else { - b43_set_txpower_g(dev, &old_bbatt, - &old_rfatt, old_tx_control); - } - } - b43_hardware_pctl_init(dev); - b43_shm_clear_tssi(dev); -} - -static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) -{ - int i; - - if (dev->phy.rev < 3) { - if (enable) - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { - b43_ofdmtab_write16(dev, - B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, 0xFFF8); - } - else - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { - b43_ofdmtab_write16(dev, - B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); - } - } else { - if (enable) - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, 0x0820); - else - for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); - } -} - -static void b43_phy_ww(struct b43_wldev *dev) -{ - u16 b, curr_s, best_s = 0xFFFF; - int i; - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN); - b43_phy_write(dev, B43_PHY_OFDM(0x1B), - b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000); - b43_phy_write(dev, B43_PHY_OFDM(0x82), - (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300); - b43_radio_write16(dev, 0x0009, - b43_radio_read16(dev, 0x0009) | 0x0080); - b43_radio_write16(dev, 0x0012, - (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002); - b43_wa_initgains(dev); - b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); - b = b43_phy_read(dev, B43_PHY_PWRDOWN); - b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); - b43_radio_write16(dev, 0x0004, - b43_radio_read16(dev, 0x0004) | 0x0004); - for (i = 0x10; i <= 0x20; i++) { - b43_radio_write16(dev, 0x0013, i); - curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; - if (!curr_s) { - best_s = 0x0000; - break; - } else if (curr_s >= 0x0080) - curr_s = 0x0100 - curr_s; - if (curr_s < best_s) - best_s = curr_s; - } - b43_phy_write(dev, B43_PHY_PWRDOWN, b); - b43_radio_write16(dev, 0x0004, - b43_radio_read16(dev, 0x0004) & 0xFFFB); - b43_radio_write16(dev, 0x0013, best_s); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); - b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); - b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); - b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); - b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); - b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); - b43_phy_write(dev, B43_PHY_OFDM(0xBB), - (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053); - b43_phy_write(dev, B43_PHY_OFDM61, - (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120); - b43_phy_write(dev, B43_PHY_OFDM(0x13), - (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000); - b43_phy_write(dev, B43_PHY_OFDM(0x14), - (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); - for (i = 0; i < 6; i++) - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); - b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); -} - -/* Initialize APHY. This is also called for the GPHY in some cases. */ -static void b43_phy_inita(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - might_sleep(); - - if (phy->rev >= 6) { - if (phy->type == B43_PHYTYPE_A) - b43_phy_write(dev, B43_PHY_OFDM(0x1B), - b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000); - if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) - b43_phy_write(dev, B43_PHY_ENCORE, - b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010); - else - b43_phy_write(dev, B43_PHY_ENCORE, - b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010); - } - - b43_wa_all(dev); - - if (phy->type == B43_PHYTYPE_A) { - if (phy->gmode && (phy->rev < 3)) - b43_phy_write(dev, 0x0034, - b43_phy_read(dev, 0x0034) | 0x0001); - b43_phy_rssiagc(dev, 0); - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); - - b43_radio_init2060(dev); - - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - ((bus->boardinfo.type == SSB_BOARD_BU4306) || - (bus->boardinfo.type == SSB_BOARD_BU4309))) { - ; //TODO: A PHY LO - } - - if (phy->rev >= 3) - b43_phy_ww(dev); - - hardware_pctl_init_aphy(dev); - - //TODO: radar detection - } - - if ((phy->type == B43_PHYTYPE_G) && - (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { - b43_phy_write(dev, B43_PHY_OFDM(0x6E), - (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) - & 0xE000) | 0x3CF); - } -} - -static void b43_phy_initb5(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - u16 offset, value; - u8 old_channel; - - if (phy->analog == 1) { - b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) - | 0x0050); - } - if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type != SSB_BOARD_BU4306)) { - value = 0x2120; - for (offset = 0x00A8; offset < 0x00C7; offset++) { - b43_phy_write(dev, offset, value); - value += 0x202; - } - } - b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF) - | 0x0700); - if (phy->radio_ver == 0x2050) - b43_phy_write(dev, 0x0038, 0x0667); - - if (phy->gmode || phy->rev >= 2) { - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) - | 0x0020); - b43_radio_write16(dev, 0x0051, - b43_radio_read16(dev, 0x0051) - | 0x0004); - } - b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); - - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); - b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); - - b43_phy_write(dev, 0x001C, 0x186A); - - b43_phy_write(dev, 0x0013, - (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900); - b43_phy_write(dev, 0x0035, - (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064); - b43_phy_write(dev, 0x005D, - (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); - } - - if (dev->bad_frames_preempt) { - b43_phy_write(dev, B43_PHY_RADIO_BITFIELD, - b43_phy_read(dev, - B43_PHY_RADIO_BITFIELD) | (1 << 11)); - } - - if (phy->analog == 1) { - b43_phy_write(dev, 0x0026, 0xCE00); - b43_phy_write(dev, 0x0021, 0x3763); - b43_phy_write(dev, 0x0022, 0x1BC3); - b43_phy_write(dev, 0x0023, 0x06F9); - b43_phy_write(dev, 0x0024, 0x037E); - } else - b43_phy_write(dev, 0x0026, 0xCC00); - b43_phy_write(dev, 0x0030, 0x00C6); - b43_write16(dev, 0x03EC, 0x3F22); - - if (phy->analog == 1) - b43_phy_write(dev, 0x0020, 0x3E1C); - else - b43_phy_write(dev, 0x0020, 0x301C); - - if (phy->analog == 0) - b43_write16(dev, 0x03E4, 0x3000); - - old_channel = phy->channel; - /* Force to channel 7, even if not supported. */ - b43_radio_selectchannel(dev, 7, 0); - - if (phy->radio_ver != 0x2050) { - b43_radio_write16(dev, 0x0075, 0x0080); - b43_radio_write16(dev, 0x0079, 0x0081); - } - - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x005A, 0x0070); - } - - b43_radio_write16(dev, 0x005B, 0x007B); - b43_radio_write16(dev, 0x005C, 0x00B0); - - b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007); - - b43_radio_selectchannel(dev, old_channel, 0); - - b43_phy_write(dev, 0x0014, 0x0080); - b43_phy_write(dev, 0x0032, 0x00CA); - b43_phy_write(dev, 0x002A, 0x88A3); - - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - - if (phy->radio_ver == 0x2050) - b43_radio_write16(dev, 0x005D, 0x000D); - - b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); -} - -static void b43_phy_initb6(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 offset, val; - u8 old_channel; - - b43_phy_write(dev, 0x003E, 0x817A); - b43_radio_write16(dev, 0x007A, - (b43_radio_read16(dev, 0x007A) | 0x0058)); - if (phy->radio_rev == 4 || phy->radio_rev == 5) { - b43_radio_write16(dev, 0x51, 0x37); - b43_radio_write16(dev, 0x52, 0x70); - b43_radio_write16(dev, 0x53, 0xB3); - b43_radio_write16(dev, 0x54, 0x9B); - b43_radio_write16(dev, 0x5A, 0x88); - b43_radio_write16(dev, 0x5B, 0x88); - b43_radio_write16(dev, 0x5D, 0x88); - b43_radio_write16(dev, 0x5E, 0x88); - b43_radio_write16(dev, 0x7D, 0x88); - b43_hf_write(dev, b43_hf_read(dev) - | B43_HF_TSSIRPSMW); - } - B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x51, 0); - b43_radio_write16(dev, 0x52, 0x40); - b43_radio_write16(dev, 0x53, 0xB7); - b43_radio_write16(dev, 0x54, 0x98); - b43_radio_write16(dev, 0x5A, 0x88); - b43_radio_write16(dev, 0x5B, 0x6B); - b43_radio_write16(dev, 0x5C, 0x0F); - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { - b43_radio_write16(dev, 0x5D, 0xFA); - b43_radio_write16(dev, 0x5E, 0xD8); - } else { - b43_radio_write16(dev, 0x5D, 0xF5); - b43_radio_write16(dev, 0x5E, 0xB8); - } - b43_radio_write16(dev, 0x0073, 0x0003); - b43_radio_write16(dev, 0x007D, 0x00A8); - b43_radio_write16(dev, 0x007C, 0x0001); - b43_radio_write16(dev, 0x007E, 0x0008); - } - val = 0x1E1F; - for (offset = 0x0088; offset < 0x0098; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - val = 0x3E3F; - for (offset = 0x0098; offset < 0x00A8; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - val = 0x2120; - for (offset = 0x00A8; offset < 0x00C8; offset++) { - b43_phy_write(dev, offset, (val & 0x3F3F)); - val += 0x0202; - } - if (phy->type == B43_PHYTYPE_G) { - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0020); - b43_radio_write16(dev, 0x0051, - b43_radio_read16(dev, 0x0051) | 0x0004); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); - b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); - b43_phy_write(dev, 0x5B, 0); - b43_phy_write(dev, 0x5C, 0); - } - - old_channel = phy->channel; - if (old_channel >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - udelay(40); - if (phy->radio_rev < 6 || phy->radio_rev == 8) { - b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) - | 0x0002)); - b43_radio_write16(dev, 0x50, 0x20); - } - if (phy->radio_rev <= 2) { - b43_radio_write16(dev, 0x7C, 0x20); - b43_radio_write16(dev, 0x5A, 0x70); - b43_radio_write16(dev, 0x5B, 0x7B); - b43_radio_write16(dev, 0x5C, 0xB0); - } - b43_radio_write16(dev, 0x007A, - (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007); - - b43_radio_selectchannel(dev, old_channel, 0); - - b43_phy_write(dev, 0x0014, 0x0200); - if (phy->radio_rev >= 6) - b43_phy_write(dev, 0x2A, 0x88C2); - else - b43_phy_write(dev, 0x2A, 0x8AC0); - b43_phy_write(dev, 0x0038, 0x0668); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - if (phy->radio_rev <= 5) { - b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D) - & 0xFF80) | 0x0003); - } - if (phy->radio_rev <= 2) - b43_radio_write16(dev, 0x005D, 0x000D); - - if (phy->analog == 4) { - b43_write16(dev, 0x3E4, 9); - b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61) - & 0x0FFF); - } else { - b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) - | 0x0004); - } - if (phy->type == B43_PHYTYPE_B) - B43_WARN_ON(1); - else if (phy->type == B43_PHYTYPE_G) - b43_write16(dev, 0x03E6, 0x0); -} - -static void b43_calc_loopback_gain(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 backup_phy[16] = { 0 }; - u16 backup_radio[3]; - u16 backup_bband; - u16 i, j, loop_i_max; - u16 trsw_rx; - u16 loop1_outer_done, loop1_inner_done; - - backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); - backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); - backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); - backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); - backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); - } - backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); - backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); - backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); - backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); - backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); - backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); - backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); - backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); - backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); - backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); - backup_bband = phy->bbatt.att; - backup_radio[0] = b43_radio_read16(dev, 0x52); - backup_radio[1] = b43_radio_read16(dev, 0x43); - backup_radio[2] = b43_radio_read16(dev, 0x7A); - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF); - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, - b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFE); - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFD); - } - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xFFCF) | 0x10); - - b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); - b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); - b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); - - b43_phy_write(dev, B43_PHY_CCK(0x0A), - b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFB); - } - b43_phy_write(dev, B43_PHY_CCK(0x03), - (b43_phy_read(dev, B43_PHY_CCK(0x03)) - & 0xFF9F) | 0x40); - - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x43, 0x000F); - } else { - b43_radio_write16(dev, 0x52, 0); - b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) - & 0xFFF0) | 0x9); - } - b43_phy_set_baseband_attenuation(dev, 11); - - if (phy->rev >= 3) - b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); - else - b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); - b43_phy_write(dev, B43_PHY_LO_CTL, 0); - - b43_phy_write(dev, B43_PHY_CCK(0x2B), - (b43_phy_read(dev, B43_PHY_CCK(0x2B)) - & 0xFFC0) | 0x01); - b43_phy_write(dev, B43_PHY_CCK(0x2B), - (b43_phy_read(dev, B43_PHY_CCK(0x2B)) - & 0xC0FF) | 0x800); - - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); - - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { - if (phy->rev >= 7) { - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) - | 0x0800); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) - | 0x8000); - } - } - b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A) - & 0x00F7); - - j = 0; - loop_i_max = (phy->radio_rev == 8) ? 15 : 9; - for (i = 0; i < loop_i_max; i++) { - for (j = 0; j < 16; j++) { - b43_radio_write16(dev, 0x43, i); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xF0FF) | (j << 8)); - b43_phy_write(dev, B43_PHY_PGACTL, - (b43_phy_read(dev, B43_PHY_PGACTL) - & 0x0FFF) | 0xA000); - b43_phy_write(dev, B43_PHY_PGACTL, - b43_phy_read(dev, B43_PHY_PGACTL) - | 0xF000); - udelay(20); - if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) - goto exit_loop1; - } - } - exit_loop1: - loop1_outer_done = i; - loop1_inner_done = j; - if (j >= 8) { - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) - | 0x30); - trsw_rx = 0x1B; - for (j = j - 8; j < 16; j++) { - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xF0FF) | (j << 8)); - b43_phy_write(dev, B43_PHY_PGACTL, - (b43_phy_read(dev, B43_PHY_PGACTL) - & 0x0FFF) | 0xA000); - b43_phy_write(dev, B43_PHY_PGACTL, - b43_phy_read(dev, B43_PHY_PGACTL) - | 0xF000); - udelay(20); - trsw_rx -= 3; - if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) - goto exit_loop2; - } - } else - trsw_rx = 0x18; - exit_loop2: - - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); - } - b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); - b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); - b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); - b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); - b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); - b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); - b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); - b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); - b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); - - b43_phy_set_baseband_attenuation(dev, backup_bband); - - b43_radio_write16(dev, 0x52, backup_radio[0]); - b43_radio_write16(dev, 0x43, backup_radio[1]); - b43_radio_write16(dev, 0x7A, backup_radio[2]); - - b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); - udelay(10); - b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); - b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); - b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); - - phy->max_lb_gain = - ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; - phy->trsw_rx_gain = trsw_rx * 2; -} - -static void b43_phy_initg(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 tmp; - - if (phy->rev == 1) - b43_phy_initb5(dev); - else - b43_phy_initb6(dev); - - if (phy->rev >= 2 || phy->gmode) - b43_phy_inita(dev); - - if (phy->rev >= 2) { - b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); - } - if (phy->rev == 2) { - b43_phy_write(dev, B43_PHY_RFOVER, 0); - b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); - } - if (phy->rev > 5) { - b43_phy_write(dev, B43_PHY_RFOVER, 0x400); - b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); - } - if (phy->gmode || phy->rev >= 2) { - tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); - tmp &= B43_PHYVER_VERSION; - if (tmp == 3 || tmp == 5) { - b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); - b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); - } - if (tmp == 5) { - b43_phy_write(dev, B43_PHY_OFDM(0xCC), - (b43_phy_read(dev, B43_PHY_OFDM(0xCC)) - & 0x00FF) | 0x1F00); - } - } - if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) - b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); - if (phy->radio_rev == 8) { - b43_phy_write(dev, B43_PHY_EXTG(0x01), - b43_phy_read(dev, B43_PHY_EXTG(0x01)) - | 0x80); - b43_phy_write(dev, B43_PHY_OFDM(0x3E), - b43_phy_read(dev, B43_PHY_OFDM(0x3E)) - | 0x4); - } - if (has_loopback_gain(phy)) - b43_calc_loopback_gain(dev); - - if (phy->radio_rev != 8) { - if (phy->initval == 0xFFFF) - phy->initval = b43_radio_init2050(dev); - else - b43_radio_write16(dev, 0x0078, phy->initval); - } - b43_lo_g_init(dev); - if (has_tx_magnification(phy)) { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFF00) - | phy->lo_control->tx_bias | phy-> - lo_control->tx_magn); - } else { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFFF0) - | phy->lo_control->tx_bias); - } - if (phy->rev >= 6) { - b43_phy_write(dev, B43_PHY_CCK(0x36), - (b43_phy_read(dev, B43_PHY_CCK(0x36)) - & 0x0FFF) | (phy->lo_control-> - tx_bias << 12)); - } - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); - else - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); - if (phy->rev < 2) - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); - else - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); - if (phy->gmode || phy->rev >= 2) { - b43_lo_g_adjust(dev); - b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); - } - - if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { - /* The specs state to update the NRSSI LT with - * the value 0x7FFFFFFF here. I think that is some weird - * compiler optimization in the original driver. - * Essentially, what we do here is resetting all NRSSI LT - * entries to -32 (see the clamp_val() in nrssi_hw_update()) - */ - b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? - b43_calc_nrssi_threshold(dev); - } else if (phy->gmode || phy->rev >= 2) { - if (phy->nrssi[0] == -1000) { - B43_WARN_ON(phy->nrssi[1] != -1000); - b43_calc_nrssi_slope(dev); - } else - b43_calc_nrssi_threshold(dev); - } - if (phy->radio_rev == 8) - b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); - b43_phy_init_pctl(dev); - /* FIXME: The spec says in the following if, the 0 should be replaced - 'if OFDM may not be used in the current locale' - but OFDM is legal everywhere */ - if ((dev->dev->bus->chip_id == 0x4306 - && dev->dev->bus->chip_package == 2) || 0) { - b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0) - & 0xBFFF); - b43_phy_write(dev, B43_PHY_OFDM(0xC3), - b43_phy_read(dev, B43_PHY_OFDM(0xC3)) - & 0x7FFF); - } -} - -/* Set the baseband attenuation value on chip. */ -void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->analog == 0) { - b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) - & 0xFFF0) | - baseband_attenuation); - } else if (phy->analog > 1) { - b43_phy_write(dev, B43_PHY_DACCTL, - (b43_phy_read(dev, B43_PHY_DACCTL) - & 0xFFC3) | (baseband_attenuation << 2)); - } else { - b43_phy_write(dev, B43_PHY_DACCTL, - (b43_phy_read(dev, B43_PHY_DACCTL) - & 0xFF87) | (baseband_attenuation << 3)); - } -} - -/* http://bcm-specs.sipsolutions.net/EstimatePowerOut - * This function converts a TSSI value to dBm in Q5.2 - */ -static s8 b43_phy_estimate_power_out(struct b43_wldev *dev, s8 tssi) -{ - struct b43_phy *phy = &dev->phy; - s8 dbm = 0; - s32 tmp; - - tmp = (phy->tgt_idle_tssi - phy->cur_idle_tssi + tssi); - - switch (phy->type) { - case B43_PHYTYPE_A: - tmp += 0x80; - tmp = clamp_val(tmp, 0x00, 0xFF); - dbm = phy->tssi2dbm[tmp]; - //TODO: There's a FIXME on the specs - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - tmp = clamp_val(tmp, 0x00, 0x3F); - dbm = phy->tssi2dbm[tmp]; - break; - default: - B43_WARN_ON(1); - } - - return dbm; -} - -void b43_put_attenuation_into_ranges(struct b43_wldev *dev, - int *_bbatt, int *_rfatt) -{ - int rfatt = *_rfatt; - int bbatt = *_bbatt; - struct b43_txpower_lo_control *lo = dev->phy.lo_control; - - /* Get baseband and radio attenuation values into their permitted ranges. - * Radio attenuation affects power level 4 times as much as baseband. */ - - /* Range constants */ - const int rf_min = lo->rfatt_list.min_val; - const int rf_max = lo->rfatt_list.max_val; - const int bb_min = lo->bbatt_list.min_val; - const int bb_max = lo->bbatt_list.max_val; - - while (1) { - if (rfatt > rf_max && bbatt > bb_max - 4) - break; /* Can not get it into ranges */ - if (rfatt < rf_min && bbatt < bb_min + 4) - break; /* Can not get it into ranges */ - if (bbatt > bb_max && rfatt > rf_max - 1) - break; /* Can not get it into ranges */ - if (bbatt < bb_min && rfatt < rf_min + 1) - break; /* Can not get it into ranges */ - - if (bbatt > bb_max) { - bbatt -= 4; - rfatt += 1; - continue; - } - if (bbatt < bb_min) { - bbatt += 4; - rfatt -= 1; - continue; - } - if (rfatt > rf_max) { - rfatt -= 1; - bbatt += 4; - continue; - } - if (rfatt < rf_min) { - rfatt += 1; - bbatt -= 4; - continue; - } - break; - } - - *_rfatt = clamp_val(rfatt, rf_min, rf_max); - *_bbatt = clamp_val(bbatt, bb_min, bb_max); -} - -/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */ -void b43_phy_xmitpower(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - if (phy->cur_idle_tssi == 0) - return; - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; -#ifdef CONFIG_B43_DEBUG - if (phy->manual_txpower_control) - return; -#endif - - switch (phy->type) { - case B43_PHYTYPE_A:{ - - //TODO: Nothing for A PHYs yet :-/ - - break; - } - case B43_PHYTYPE_B: - case B43_PHYTYPE_G:{ - u16 tmp; - s8 v0, v1, v2, v3; - s8 average; - int max_pwr; - int desired_pwr, estimated_pwr, pwr_adjust; - int rfatt_delta, bbatt_delta; - int rfatt, bbatt; - u8 tx_control; - - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - tmp = 0; - - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) { - tmp = - b43_shm_read16(dev, B43_SHM_SHARED, 0x0070); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = - b43_shm_read16(dev, B43_SHM_SHARED, 0x0072); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) - return; - v0 = (v0 + 0x20) & 0x3F; - v1 = (v1 + 0x20) & 0x3F; - v2 = (v2 + 0x20) & 0x3F; - v3 = (v3 + 0x20) & 0x3F; - tmp = 1; - } - b43_shm_clear_tssi(dev); - - average = (v0 + v1 + v2 + v3 + 2) / 4; - - if (tmp - && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) & - 0x8)) - average -= 13; - - estimated_pwr = - b43_phy_estimate_power_out(dev, average); - - max_pwr = dev->dev->bus->sprom.maxpwr_bg; - if ((dev->dev->bus->sprom.boardflags_lo - & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G)) - max_pwr -= 0x3; - if (unlikely(max_pwr <= 0)) { - b43warn(dev->wl, - "Invalid max-TX-power value in SPROM.\n"); - max_pwr = 60; /* fake it */ - dev->dev->bus->sprom.maxpwr_bg = max_pwr; - } - - /*TODO: - max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr) - where REG is the max power as per the regulatory domain - */ - - /* Get desired power (in Q5.2) */ - desired_pwr = INT_TO_Q52(phy->power_level); - /* And limit it. max_pwr already is Q5.2 */ - desired_pwr = clamp_val(desired_pwr, 0, max_pwr); - if (b43_debug(dev, B43_DBG_XMITPOWER)) { - b43dbg(dev->wl, - "Current TX power output: " Q52_FMT - " dBm, " "Desired TX power output: " - Q52_FMT " dBm\n", Q52_ARG(estimated_pwr), - Q52_ARG(desired_pwr)); - } - - /* Calculate the adjustment delta. */ - pwr_adjust = desired_pwr - estimated_pwr; - - /* RF attenuation delta. */ - rfatt_delta = ((pwr_adjust + 7) / 8); - /* Lower attenuation => Bigger power output. Negate it. */ - rfatt_delta = -rfatt_delta; - - /* Baseband attenuation delta. */ - bbatt_delta = pwr_adjust / 2; - /* Lower attenuation => Bigger power output. Negate it. */ - bbatt_delta = -bbatt_delta; - /* RF att affects power level 4 times as much as - * Baseband attennuation. Subtract it. */ - bbatt_delta -= 4 * rfatt_delta; - - /* So do we finally need to adjust something? */ - if ((rfatt_delta == 0) && (bbatt_delta == 0)) - return; - - /* Calculate the new attenuation values. */ - bbatt = phy->bbatt.att; - bbatt += bbatt_delta; - rfatt = phy->rfatt.att; - rfatt += rfatt_delta; - - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - tx_control = phy->tx_control; - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { - if (rfatt <= 1) { - if (tx_control == 0) { - tx_control = - B43_TXCTL_PA2DB | - B43_TXCTL_TXMIX; - rfatt += 2; - bbatt += 2; - } else if (dev->dev->bus->sprom. - boardflags_lo & - B43_BFL_PACTRL) { - bbatt += 4 * (rfatt - 2); - rfatt = 2; - } - } else if (rfatt > 4 && tx_control) { - tx_control = 0; - if (bbatt < 3) { - rfatt -= 3; - bbatt += 2; - } else { - rfatt -= 2; - bbatt -= 2; - } - } - } - /* Save the control values */ - phy->tx_control = tx_control; - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - phy->rfatt.att = rfatt; - phy->bbatt.att = bbatt; - - /* Adjust the hardware */ - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, - phy->tx_control); - b43_radio_unlock(dev); - b43_phy_unlock(dev); - break; - } - case B43_PHYTYPE_N: - b43_nphy_xmitpower(dev); - break; - default: - B43_WARN_ON(1); - } -} - -static inline s32 b43_tssi2dbm_ad(s32 num, s32 den) -{ - if (num < 0) - return num / den; - else - return (num + den / 2) / den; -} - -static inline - s8 b43_tssi2dbm_entry(s8 entry[], u8 index, s16 pab0, s16 pab1, s16 pab2) -{ - s32 m1, m2, f = 256, q, delta; - s8 i = 0; - - m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); - m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); - do { - if (i > 15) - return -EINVAL; - q = b43_tssi2dbm_ad(f * 4096 - - b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); - delta = abs(q - f); - f = q; - i++; - } while (delta >= 2); - entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); - return 0; -} - -/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */ -int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - s16 pab0, pab1, pab2; - u8 idx; - s8 *dyn_tssi2dbm; - - if (phy->type == B43_PHYTYPE_A) { - pab0 = (s16) (dev->dev->bus->sprom.pa1b0); - pab1 = (s16) (dev->dev->bus->sprom.pa1b1); - pab2 = (s16) (dev->dev->bus->sprom.pa1b2); - } else { - pab0 = (s16) (dev->dev->bus->sprom.pa0b0); - pab1 = (s16) (dev->dev->bus->sprom.pa0b1); - pab2 = (s16) (dev->dev->bus->sprom.pa0b2); - } - - if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) { - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_b_table; - return 0; - } - - if (pab0 != 0 && pab1 != 0 && pab2 != 0 && - pab0 != -1 && pab1 != -1 && pab2 != -1) { - /* The pabX values are set in SPROM. Use them. */ - if (phy->type == B43_PHYTYPE_A) { - if ((s8) dev->dev->bus->sprom.itssi_a != 0 && - (s8) dev->dev->bus->sprom.itssi_a != -1) - phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.itssi_a); - else - phy->tgt_idle_tssi = 62; - } else { - if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && - (s8) dev->dev->bus->sprom.itssi_bg != -1) - phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.itssi_bg); - else - phy->tgt_idle_tssi = 62; - } - dyn_tssi2dbm = kmalloc(64, GFP_KERNEL); - if (dyn_tssi2dbm == NULL) { - b43err(dev->wl, "Could not allocate memory " - "for tssi2dbm table\n"); - return -ENOMEM; - } - for (idx = 0; idx < 64; idx++) - if (b43_tssi2dbm_entry - (dyn_tssi2dbm, idx, pab0, pab1, pab2)) { - phy->tssi2dbm = NULL; - b43err(dev->wl, "Could not generate " - "tssi2dBm table\n"); - kfree(dyn_tssi2dbm); - return -ENODEV; - } - phy->tssi2dbm = dyn_tssi2dbm; - phy->dyn_tssi_tbl = 1; - } else { - /* pabX values not set in SPROM. */ - switch (phy->type) { - case B43_PHYTYPE_A: - /* APHY needs a generated table. */ - phy->tssi2dbm = NULL; - b43err(dev->wl, "Could not generate tssi2dBm " - "table (wrong SPROM info)!\n"); - return -ENODEV; - case B43_PHYTYPE_B: - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_b_table; - break; - case B43_PHYTYPE_G: - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_g_table; - break; - } - } - - return 0; -} - -int b43_phy_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - bool unsupported = 0; - int err = 0; - - switch (phy->type) { - case B43_PHYTYPE_A: - if (phy->rev == 2 || phy->rev == 3) - b43_phy_inita(dev); - else - unsupported = 1; - break; - case B43_PHYTYPE_G: - b43_phy_initg(dev); - break; - case B43_PHYTYPE_N: - err = b43_phy_initn(dev); - break; - default: - unsupported = 1; - } - if (unsupported) - b43err(dev->wl, "Unknown PHYTYPE found\n"); - - return err; -} - -void b43_set_rx_antenna(struct b43_wldev *dev, int antenna) -{ - struct b43_phy *phy = &dev->phy; - u64 hf; - u16 tmp; - int autodiv = 0; - - if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) - autodiv = 1; - - hf = b43_hf_read(dev); - hf &= ~B43_HF_ANTDIVHELP; - b43_hf_write(dev, hf); - - switch (phy->type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); - tmp &= ~B43_PHY_BBANDCFG_RXANT; - tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) - << B43_PHY_BBANDCFG_RXANT_SHIFT; - b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); - - if (autodiv) { - tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); - if (antenna == B43_ANTENNA_AUTO0) - tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; - else - tmp |= B43_PHY_ANTDWELL_AUTODIV1; - b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); - } - if (phy->type == B43_PHYTYPE_G) { - tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); - if (autodiv) - tmp |= B43_PHY_ANTWRSETT_ARXDIV; - else - tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; - b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); - if (phy->rev >= 2) { - tmp = b43_phy_read(dev, B43_PHY_OFDM61); - tmp |= B43_PHY_OFDM61_10; - b43_phy_write(dev, B43_PHY_OFDM61, tmp); - - tmp = - b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK); - tmp = (tmp & 0xFF00) | 0x15; - b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK, - tmp); - - if (phy->rev == 2) { - b43_phy_write(dev, B43_PHY_ADIVRELATED, - 8); - } else { - tmp = - b43_phy_read(dev, - B43_PHY_ADIVRELATED); - tmp = (tmp & 0xFF00) | 8; - b43_phy_write(dev, B43_PHY_ADIVRELATED, - tmp); - } - } - if (phy->rev >= 6) - b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); - } else { - if (phy->rev < 3) { - tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); - tmp = (tmp & 0xFF00) | 0x24; - b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); - } else { - tmp = b43_phy_read(dev, B43_PHY_OFDM61); - tmp |= 0x10; - b43_phy_write(dev, B43_PHY_OFDM61, tmp); - if (phy->analog == 3) { - b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, - 0x1D); - b43_phy_write(dev, B43_PHY_ADIVRELATED, - 8); - } else { - b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, - 0x3A); - tmp = - b43_phy_read(dev, - B43_PHY_ADIVRELATED); - tmp = (tmp & 0xFF00) | 8; - b43_phy_write(dev, B43_PHY_ADIVRELATED, - tmp); - } - } - } - break; - case B43_PHYTYPE_B: - tmp = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); - tmp &= ~B43_PHY_BBANDCFG_RXANT; - tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) - << B43_PHY_BBANDCFG_RXANT_SHIFT; - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, tmp); - break; - case B43_PHYTYPE_N: - b43_nphy_set_rxantenna(dev, antenna); - break; - default: - B43_WARN_ON(1); - } - - hf |= B43_HF_ANTDIVHELP; - b43_hf_write(dev, hf); -} - -/* Get the freq, as it has to be written to the device. */ -static inline u16 channel2freq_bg(u8 channel) -{ - B43_WARN_ON(!(channel >= 1 && channel <= 14)); - - return b43_radio_channel_codes_bg[channel - 1]; -} - -/* Get the freq, as it has to be written to the device. */ -static inline u16 channel2freq_a(u8 channel) -{ - B43_WARN_ON(channel > 200); - - return (5000 + 5 * channel); -} - -void b43_radio_lock(struct b43_wldev *dev) -{ - u32 macctl; - - macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); - macctl |= B43_MACCTL_RADIOLOCK; - b43_write32(dev, B43_MMIO_MACCTL, macctl); - /* Commit the write and wait for the device - * to exit any radio register access. */ - b43_read32(dev, B43_MMIO_MACCTL); - udelay(10); -} - -void b43_radio_unlock(struct b43_wldev *dev) -{ - u32 macctl; - - /* Commit any write */ - b43_read16(dev, B43_MMIO_PHY_VER); - /* unlock */ - macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); - macctl &= ~B43_MACCTL_RADIOLOCK; - b43_write32(dev, B43_MMIO_MACCTL, macctl); -} - -u16 b43_radio_read16(struct b43_wldev *dev, u16 offset) -{ - struct b43_phy *phy = &dev->phy; - - /* Offset 1 is a 32-bit register. */ - B43_WARN_ON(offset == 1); - - switch (phy->type) { - case B43_PHYTYPE_A: - offset |= 0x40; - break; - case B43_PHYTYPE_B: - if (phy->radio_ver == 0x2053) { - if (offset < 0x70) - offset += 0x80; - else if (offset < 0x80) - offset += 0x70; - } else if (phy->radio_ver == 0x2050) { - offset |= 0x80; - } else - B43_WARN_ON(1); - break; - case B43_PHYTYPE_G: - offset |= 0x80; - break; - case B43_PHYTYPE_N: - offset |= 0x100; - break; - case B43_PHYTYPE_LP: - /* No adjustment required. */ - break; - default: - B43_WARN_ON(1); - } - - b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset); - return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); -} - -void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val) -{ - /* Offset 1 is a 32-bit register. */ - B43_WARN_ON(offset == 1); - - b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset); - b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, val); -} - -void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) -{ - b43_radio_write16(dev, offset, - b43_radio_read16(dev, offset) & mask); -} - -void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) -{ - b43_radio_write16(dev, offset, - b43_radio_read16(dev, offset) | set); -} - -void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) -{ - b43_radio_write16(dev, offset, - (b43_radio_read16(dev, offset) & mask) | set); -} - static void b43_set_all_gains(struct b43_wldev *dev, s16 first, s16 second, s16 third) { @@ -2134,108 +382,10 @@ static void b43_set_original_gains(struct b43_wldev *dev) b43_dummy_transmission(dev); } -/* Synthetic PU workaround */ -static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) -{ - struct b43_phy *phy = &dev->phy; - - might_sleep(); - - if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { - /* We do not need the workaround. */ - return; - } - - if (channel <= 10) { - b43_write16(dev, B43_MMIO_CHANNEL, - channel2freq_bg(channel + 4)); - } else { - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); - } - msleep(1); - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); -} - -u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel) -{ - struct b43_phy *phy = &dev->phy; - u8 ret = 0; - u16 saved, rssi, temp; - int i, j = 0; - - saved = b43_phy_read(dev, 0x0403); - b43_radio_selectchannel(dev, channel, 0); - b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); - if (phy->aci_hw_rssi) - rssi = b43_phy_read(dev, 0x048A) & 0x3F; - else - rssi = saved & 0x3F; - /* clamp temp to signed 5bit */ - if (rssi > 32) - rssi -= 64; - for (i = 0; i < 100; i++) { - temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; - if (temp > 32) - temp -= 64; - if (temp < rssi) - j++; - if (j >= 20) - ret = 1; - } - b43_phy_write(dev, 0x0403, saved); - - return ret; -} - -u8 b43_radio_aci_scan(struct b43_wldev * dev) -{ - struct b43_phy *phy = &dev->phy; - u8 ret[13]; - unsigned int channel = phy->channel; - unsigned int i, j, start, end; - - if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) - return 0; - - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); - b43_set_all_gains(dev, 3, 8, 1); - - start = (channel - 5 > 0) ? channel - 5 : 1; - end = (channel + 5 < 14) ? channel + 5 : 13; - - for (i = start; i <= end; i++) { - if (abs(channel - i) > 2) - ret[i - 1] = b43_radio_aci_detect(dev, i); - } - b43_radio_selectchannel(dev, channel, 0); - b43_phy_write(dev, 0x0802, - (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003); - b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); - b43_set_original_gains(dev); - for (i = 0; i < 13; i++) { - if (!ret[i]) - continue; - end = (i + 5 < 13) ? i + 5 : 13; - for (j = i; j < end; j++) - ret[j] = 1; - } - b43_radio_unlock(dev); - b43_phy_unlock(dev); - - return ret[channel - 1]; -} - /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val) { b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset); - mmiowb(); b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val); } @@ -2267,17 +417,17 @@ void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ void b43_nrssi_mem_update(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; s16 i, delta; s32 tmp; - delta = 0x1F - phy->nrssi[0]; + delta = 0x1F - gphy->nrssi[0]; for (i = 0; i < 64; i++) { - tmp = (i - delta) * phy->nrssislope; + tmp = (i - delta) * gphy->nrssislope; tmp /= 0x10000; tmp += 0x3A; tmp = clamp_val(tmp, 0, 0x3F); - phy->nrssi_lt[i] = tmp; + gphy->nrssi_lt[i] = tmp; } } @@ -2442,347 +592,230 @@ static void b43_calc_nrssi_offset(struct b43_wldev *dev) void b43_calc_nrssi_slope(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 backup[18] = { 0 }; u16 tmp; s16 nrssi0, nrssi1; - switch (phy->type) { - case B43_PHYTYPE_B: - backup[0] = b43_radio_read16(dev, 0x007A); - backup[1] = b43_radio_read16(dev, 0x0052); - backup[2] = b43_radio_read16(dev, 0x0043); - backup[3] = b43_phy_read(dev, 0x0030); - backup[4] = b43_phy_read(dev, 0x0026); - backup[5] = b43_phy_read(dev, 0x0015); - backup[6] = b43_phy_read(dev, 0x002A); - backup[7] = b43_phy_read(dev, 0x0020); - backup[8] = b43_phy_read(dev, 0x005A); - backup[9] = b43_phy_read(dev, 0x0059); - backup[10] = b43_phy_read(dev, 0x0058); - backup[11] = b43_read16(dev, 0x03E2); - backup[12] = b43_read16(dev, 0x03E6); - backup[13] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); - - tmp = b43_radio_read16(dev, 0x007A); - tmp &= (phy->rev >= 5) ? 0x007F : 0x000F; - b43_radio_write16(dev, 0x007A, tmp); - b43_phy_write(dev, 0x0030, 0x00FF); - b43_write16(dev, 0x03EC, 0x7F7F); - b43_phy_write(dev, 0x0026, 0x0000); - b43_phy_write(dev, 0x0015, b43_phy_read(dev, 0x0015) | 0x0020); - b43_phy_write(dev, 0x002A, 0x08A3); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0080); + B43_WARN_ON(phy->type != B43_PHYTYPE_G); - nrssi0 = (s16) b43_phy_read(dev, 0x0027); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x007F); - if (phy->rev >= 2) { - b43_write16(dev, 0x03E6, 0x0040); - } else if (phy->rev == 0) { - b43_write16(dev, 0x03E6, 0x0122); - } else { - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, - B43_MMIO_CHANNEL_EXT) & 0x2000); - } - b43_phy_write(dev, 0x0020, 0x3F3F); - b43_phy_write(dev, 0x0015, 0xF330); - b43_radio_write16(dev, 0x005A, 0x0060); - b43_radio_write16(dev, 0x0043, - b43_radio_read16(dev, 0x0043) & 0x00F0); - b43_phy_write(dev, 0x005A, 0x0480); - b43_phy_write(dev, 0x0059, 0x0810); - b43_phy_write(dev, 0x0058, 0x000D); - udelay(20); - - nrssi1 = (s16) b43_phy_read(dev, 0x0027); - b43_phy_write(dev, 0x0030, backup[3]); - b43_radio_write16(dev, 0x007A, backup[0]); - b43_write16(dev, 0x03E2, backup[11]); - b43_phy_write(dev, 0x0026, backup[4]); - b43_phy_write(dev, 0x0015, backup[5]); - b43_phy_write(dev, 0x002A, backup[6]); - b43_synth_pu_workaround(dev, phy->channel); - if (phy->rev != 0) - b43_write16(dev, 0x03F4, backup[13]); - - b43_phy_write(dev, 0x0020, backup[7]); - b43_phy_write(dev, 0x005A, backup[8]); - b43_phy_write(dev, 0x0059, backup[9]); - b43_phy_write(dev, 0x0058, backup[10]); - b43_radio_write16(dev, 0x0052, backup[1]); - b43_radio_write16(dev, 0x0043, backup[2]); - - if (nrssi0 == nrssi1) - phy->nrssislope = 0x00010000; - else - phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); - - if (nrssi0 <= -4) { - phy->nrssi[0] = nrssi0; - phy->nrssi[1] = nrssi1; - } - break; - case B43_PHYTYPE_G: - if (phy->radio_rev >= 9) - return; - if (phy->radio_rev == 8) - b43_calc_nrssi_offset(dev); + if (phy->radio_rev >= 9) + return; + if (phy->radio_rev == 8) + b43_calc_nrssi_offset(dev); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); - backup[7] = b43_read16(dev, 0x03E2); - b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); - backup[0] = b43_radio_read16(dev, 0x007A); - backup[1] = b43_radio_read16(dev, 0x0052); - backup[2] = b43_radio_read16(dev, 0x0043); - backup[3] = b43_phy_read(dev, 0x0015); - backup[4] = b43_phy_read(dev, 0x005A); - backup[5] = b43_phy_read(dev, 0x0059); - backup[6] = b43_phy_read(dev, 0x0058); - backup[8] = b43_read16(dev, 0x03E6); - backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); - if (phy->rev >= 3) { - backup[10] = b43_phy_read(dev, 0x002E); - backup[11] = b43_phy_read(dev, 0x002F); - backup[12] = b43_phy_read(dev, 0x080F); - backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); - backup[14] = b43_phy_read(dev, 0x0801); - backup[15] = b43_phy_read(dev, 0x0060); - backup[16] = b43_phy_read(dev, 0x0014); - backup[17] = b43_phy_read(dev, 0x0478); - b43_phy_write(dev, 0x002E, 0); - b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); - switch (phy->rev) { - case 4: - case 6: - case 7: - b43_phy_write(dev, 0x0478, - b43_phy_read(dev, 0x0478) - | 0x0100); - b43_phy_write(dev, 0x0801, - b43_phy_read(dev, 0x0801) - | 0x0040); - break; - case 3: - case 5: - b43_phy_write(dev, 0x0801, - b43_phy_read(dev, 0x0801) - & 0xFFBF); - break; - } - b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); + backup[7] = b43_read16(dev, 0x03E2); + b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); + backup[0] = b43_radio_read16(dev, 0x007A); + backup[1] = b43_radio_read16(dev, 0x0052); + backup[2] = b43_radio_read16(dev, 0x0043); + backup[3] = b43_phy_read(dev, 0x0015); + backup[4] = b43_phy_read(dev, 0x005A); + backup[5] = b43_phy_read(dev, 0x0059); + backup[6] = b43_phy_read(dev, 0x0058); + backup[8] = b43_read16(dev, 0x03E6); + backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); + if (phy->rev >= 3) { + backup[10] = b43_phy_read(dev, 0x002E); + backup[11] = b43_phy_read(dev, 0x002F); + backup[12] = b43_phy_read(dev, 0x080F); + backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); + backup[14] = b43_phy_read(dev, 0x0801); + backup[15] = b43_phy_read(dev, 0x0060); + backup[16] = b43_phy_read(dev, 0x0014); + backup[17] = b43_phy_read(dev, 0x0478); + b43_phy_write(dev, 0x002E, 0); + b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); + switch (phy->rev) { + case 4: + case 6: + case 7: + b43_phy_write(dev, 0x0478, + b43_phy_read(dev, 0x0478) + | 0x0100); + b43_phy_write(dev, 0x0801, + b43_phy_read(dev, 0x0801) | 0x0040); - b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014) - | 0x0200); - } - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0070); - b43_set_all_gains(dev, 0, 8, 0); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x00F7); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0811, - (b43_phy_read(dev, 0x0811) & 0xFFCF) | - 0x0030); - b43_phy_write(dev, 0x0812, - (b43_phy_read(dev, 0x0812) & 0xFFCF) | - 0x0010); + break; + case 3: + case 5: + b43_phy_write(dev, 0x0801, + b43_phy_read(dev, 0x0801) + & 0xFFBF); + break; } - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0080); - udelay(20); + b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) + | 0x0040); + b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014) + | 0x0200); + } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0070); + b43_set_all_gains(dev, 0, 8, 0); + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) & 0x00F7); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0811, + (b43_phy_read(dev, 0x0811) & 0xFFCF) | + 0x0030); + b43_phy_write(dev, 0x0812, + (b43_phy_read(dev, 0x0812) & 0xFFCF) | + 0x0010); + } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0080); + udelay(20); - nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); - if (nrssi0 >= 0x0020) - nrssi0 -= 0x0040; + nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); + if (nrssi0 >= 0x0020) + nrssi0 -= 0x0040; - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x007F); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003) - & 0xFF9F) | 0x0040); - } - - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - | 0x2000); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x000F); - b43_phy_write(dev, 0x0015, 0xF330); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0812, - (b43_phy_read(dev, 0x0812) & 0xFFCF) | - 0x0020); - b43_phy_write(dev, 0x0811, - (b43_phy_read(dev, 0x0811) & 0xFFCF) | - 0x0020); - } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) & 0x007F); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003) + & 0xFF9F) | 0x0040); + } - b43_set_all_gains(dev, 3, 0, 1); - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x0043, 0x001F); - } else { - tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; - b43_radio_write16(dev, 0x0052, tmp | 0x0060); - tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; - b43_radio_write16(dev, 0x0043, tmp | 0x0009); - } - b43_phy_write(dev, 0x005A, 0x0480); - b43_phy_write(dev, 0x0059, 0x0810); - b43_phy_write(dev, 0x0058, 0x000D); - udelay(20); - nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); - if (nrssi1 >= 0x0020) - nrssi1 -= 0x0040; - if (nrssi0 == nrssi1) - phy->nrssislope = 0x00010000; - else - phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); - if (nrssi0 >= -4) { - phy->nrssi[0] = nrssi1; - phy->nrssi[1] = nrssi0; - } - if (phy->rev >= 3) { - b43_phy_write(dev, 0x002E, backup[10]); - b43_phy_write(dev, 0x002F, backup[11]); - b43_phy_write(dev, 0x080F, backup[12]); - b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); - } - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0812, - b43_phy_read(dev, 0x0812) & 0xFFCF); - b43_phy_write(dev, 0x0811, - b43_phy_read(dev, 0x0811) & 0xFFCF); - } + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + | 0x2000); + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x000F); + b43_phy_write(dev, 0x0015, 0xF330); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0812, + (b43_phy_read(dev, 0x0812) & 0xFFCF) | + 0x0020); + b43_phy_write(dev, 0x0811, + (b43_phy_read(dev, 0x0811) & 0xFFCF) | + 0x0020); + } - b43_radio_write16(dev, 0x007A, backup[0]); - b43_radio_write16(dev, 0x0052, backup[1]); - b43_radio_write16(dev, 0x0043, backup[2]); - b43_write16(dev, 0x03E2, backup[7]); - b43_write16(dev, 0x03E6, backup[8]); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); - b43_phy_write(dev, 0x0015, backup[3]); - b43_phy_write(dev, 0x005A, backup[4]); - b43_phy_write(dev, 0x0059, backup[5]); - b43_phy_write(dev, 0x0058, backup[6]); - b43_synth_pu_workaround(dev, phy->channel); - b43_phy_write(dev, 0x0802, - b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002)); - b43_set_original_gains(dev); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); - if (phy->rev >= 3) { - b43_phy_write(dev, 0x0801, backup[14]); - b43_phy_write(dev, 0x0060, backup[15]); - b43_phy_write(dev, 0x0014, backup[16]); - b43_phy_write(dev, 0x0478, backup[17]); - } - b43_nrssi_mem_update(dev); - b43_calc_nrssi_threshold(dev); - break; - default: - B43_WARN_ON(1); + b43_set_all_gains(dev, 3, 0, 1); + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x0043, 0x001F); + } else { + tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; + b43_radio_write16(dev, 0x0052, tmp | 0x0060); + tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; + b43_radio_write16(dev, 0x0043, tmp | 0x0009); + } + b43_phy_write(dev, 0x005A, 0x0480); + b43_phy_write(dev, 0x0059, 0x0810); + b43_phy_write(dev, 0x0058, 0x000D); + udelay(20); + nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); + if (nrssi1 >= 0x0020) + nrssi1 -= 0x0040; + if (nrssi0 == nrssi1) + gphy->nrssislope = 0x00010000; + else + gphy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); + if (nrssi0 >= -4) { + gphy->nrssi[0] = nrssi1; + gphy->nrssi[1] = nrssi0; + } + if (phy->rev >= 3) { + b43_phy_write(dev, 0x002E, backup[10]); + b43_phy_write(dev, 0x002F, backup[11]); + b43_phy_write(dev, 0x080F, backup[12]); + b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); } + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0812, + b43_phy_read(dev, 0x0812) & 0xFFCF); + b43_phy_write(dev, 0x0811, + b43_phy_read(dev, 0x0811) & 0xFFCF); + } + + b43_radio_write16(dev, 0x007A, backup[0]); + b43_radio_write16(dev, 0x0052, backup[1]); + b43_radio_write16(dev, 0x0043, backup[2]); + b43_write16(dev, 0x03E2, backup[7]); + b43_write16(dev, 0x03E6, backup[8]); + b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); + b43_phy_write(dev, 0x0015, backup[3]); + b43_phy_write(dev, 0x005A, backup[4]); + b43_phy_write(dev, 0x0059, backup[5]); + b43_phy_write(dev, 0x0058, backup[6]); + b43_synth_pu_workaround(dev, phy->channel); + b43_phy_write(dev, 0x0802, + b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002)); + b43_set_original_gains(dev); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); + if (phy->rev >= 3) { + b43_phy_write(dev, 0x0801, backup[14]); + b43_phy_write(dev, 0x0060, backup[15]); + b43_phy_write(dev, 0x0014, backup[16]); + b43_phy_write(dev, 0x0478, backup[17]); + } + b43_nrssi_mem_update(dev); + b43_calc_nrssi_threshold(dev); } -void b43_calc_nrssi_threshold(struct b43_wldev *dev) +static void b43_calc_nrssi_threshold(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - s32 threshold; + struct b43_phy_g *gphy = phy->g; s32 a, b; s16 tmp16; u16 tmp_u16; - switch (phy->type) { - case B43_PHYTYPE_B:{ - if (phy->radio_ver != 0x2050) - return; - if (! - (dev->dev->bus->sprom. - boardflags_lo & B43_BFL_RSSI)) - return; - - if (phy->radio_rev >= 6) { - threshold = - (phy->nrssi[1] - phy->nrssi[0]) * 32; - threshold += 20 * (phy->nrssi[0] + 1); - threshold /= 40; - } else - threshold = phy->nrssi[1] - 5; - - threshold = clamp_val(threshold, 0, 0x3E); - b43_phy_read(dev, 0x0020); /* dummy read */ - b43_phy_write(dev, 0x0020, - (((u16) threshold) << 8) | 0x001C); - - if (phy->radio_rev >= 6) { - b43_phy_write(dev, 0x0087, 0x0E0D); - b43_phy_write(dev, 0x0086, 0x0C0B); - b43_phy_write(dev, 0x0085, 0x0A09); - b43_phy_write(dev, 0x0084, 0x0808); - b43_phy_write(dev, 0x0083, 0x0808); - b43_phy_write(dev, 0x0082, 0x0604); - b43_phy_write(dev, 0x0081, 0x0302); - b43_phy_write(dev, 0x0080, 0x0100); - } - break; + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + if (!phy->gmode || + !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + tmp16 = b43_nrssi_hw_read(dev, 0x20); + if (tmp16 >= 0x20) + tmp16 -= 0x40; + if (tmp16 < 3) { + b43_phy_write(dev, 0x048A, + (b43_phy_read(dev, 0x048A) + & 0xF000) | 0x09EB); + } else { + b43_phy_write(dev, 0x048A, + (b43_phy_read(dev, 0x048A) + & 0xF000) | 0x0AED); } - case B43_PHYTYPE_G: - if (!phy->gmode || - !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { - tmp16 = b43_nrssi_hw_read(dev, 0x20); - if (tmp16 >= 0x20) - tmp16 -= 0x40; - if (tmp16 < 3) { - b43_phy_write(dev, 0x048A, - (b43_phy_read(dev, 0x048A) - & 0xF000) | 0x09EB); - } else { - b43_phy_write(dev, 0x048A, - (b43_phy_read(dev, 0x048A) - & 0xF000) | 0x0AED); - } + } else { + if (gphy->interfmode == B43_INTERFMODE_NONWLAN) { + a = 0xE; + b = 0xA; + } else if (!gphy->aci_wlan_automatic && gphy->aci_enable) { + a = 0x13; + b = 0x12; } else { - if (phy->interfmode == B43_INTERFMODE_NONWLAN) { - a = 0xE; - b = 0xA; - } else if (!phy->aci_wlan_automatic && phy->aci_enable) { - a = 0x13; - b = 0x12; - } else { - a = 0xE; - b = 0x11; - } - - a = a * (phy->nrssi[1] - phy->nrssi[0]); - a += (phy->nrssi[0] << 6); - if (a < 32) - a += 31; - else - a += 32; - a = a >> 6; - a = clamp_val(a, -31, 31); - - b = b * (phy->nrssi[1] - phy->nrssi[0]); - b += (phy->nrssi[0] << 6); - if (b < 32) - b += 31; - else - b += 32; - b = b >> 6; - b = clamp_val(b, -31, 31); - - tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; - tmp_u16 |= ((u32) b & 0x0000003F); - tmp_u16 |= (((u32) a & 0x0000003F) << 6); - b43_phy_write(dev, 0x048A, tmp_u16); + a = 0xE; + b = 0x11; } - break; - default: - B43_WARN_ON(1); + + a = a * (gphy->nrssi[1] - gphy->nrssi[0]); + a += (gphy->nrssi[0] << 6); + if (a < 32) + a += 31; + else + a += 32; + a = a >> 6; + a = clamp_val(a, -31, 31); + + b = b * (gphy->nrssi[1] - gphy->nrssi[0]); + b += (gphy->nrssi[0] << 6); + if (b < 32) + b += 31; + else + b += 32; + b = b >> 6; + b = clamp_val(b, -31, 31); + + tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; + tmp_u16 |= ((u32) b & 0x0000003F); + tmp_u16 |= (((u32) a & 0x0000003F) << 6); + b43_phy_write(dev, 0x048A, tmp_u16); } } @@ -2860,9 +893,10 @@ static void b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp, flipped; size_t stackidx = 0; - u32 *stack = phy->interfstack; + u32 *stack = gphy->interfstack; switch (mode) { case B43_INTERFMODE_NONWLAN: @@ -2928,7 +962,7 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) if (b43_phy_read(dev, 0x0033) & 0x0800) break; - phy->aci_enable = 1; + gphy->aci_enable = 1; phy_stacksave(B43_PHY_RADIO_BITFIELD); phy_stacksave(B43_PHY_G_CRS); @@ -3064,7 +1098,8 @@ static void b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) { struct b43_phy *phy = &dev->phy; - u32 *stack = phy->interfstack; + struct b43_phy_g *gphy = phy->g; + u32 *stack = gphy->interfstack; switch (mode) { case B43_INTERFMODE_NONWLAN: @@ -3103,7 +1138,7 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) if (!(b43_phy_read(dev, 0x0033) & 0x0800)) break; - phy->aci_enable = 0; + gphy->aci_enable = 0; phy_stackrestore(B43_PHY_RADIO_BITFIELD); phy_stackrestore(B43_PHY_G_CRS); @@ -3153,47 +1188,6 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) #undef ofdmtab_stacksave #undef ofdmtab_stackrestore -int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode) -{ - struct b43_phy *phy = &dev->phy; - int currentmode; - - if ((phy->type != B43_PHYTYPE_G) || (phy->rev == 0) || (!phy->gmode)) - return -ENODEV; - - phy->aci_wlan_automatic = 0; - switch (mode) { - case B43_INTERFMODE_AUTOWLAN: - phy->aci_wlan_automatic = 1; - if (phy->aci_enable) - mode = B43_INTERFMODE_MANUALWLAN; - else - mode = B43_INTERFMODE_NONE; - break; - case B43_INTERFMODE_NONE: - case B43_INTERFMODE_NONWLAN: - case B43_INTERFMODE_MANUALWLAN: - break; - default: - return -EINVAL; - } - - currentmode = phy->interfmode; - if (currentmode == mode) - return 0; - if (currentmode != B43_INTERFMODE_NONE) - b43_radio_interference_mitigation_disable(dev, currentmode); - - if (mode == B43_INTERFMODE_NONE) { - phy->aci_enable = 0; - phy->aci_hw_rssi = 0; - } else - b43_radio_interference_mitigation_enable(dev, mode); - phy->interfmode = mode; - - return 0; -} - static u16 b43_radio_core_calibration_value(struct b43_wldev *dev) { u16 reg, index, ret; @@ -3219,13 +1213,14 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev, u16 phy_register, unsigned int lpd) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct ssb_sprom *sprom = &(dev->dev->bus->sprom); if (!phy->gmode) return 0; if (has_loopback_gain(phy)) { - int max_lb_gain = phy->max_lb_gain; + int max_lb_gain = gphy->max_lb_gain; u16 extlna; u16 i; @@ -3606,301 +1601,1682 @@ u16 b43_radio_init2050(struct b43_wldev *dev) return ret; } -void b43_radio_init2060(struct b43_wldev *dev) +static void b43_phy_initb5(struct b43_wldev *dev) { - int err; + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 offset, value; + u8 old_channel; - b43_radio_write16(dev, 0x0004, 0x00C0); - b43_radio_write16(dev, 0x0005, 0x0008); - b43_radio_write16(dev, 0x0009, 0x0040); - b43_radio_write16(dev, 0x0005, 0x00AA); - b43_radio_write16(dev, 0x0032, 0x008F); - b43_radio_write16(dev, 0x0006, 0x008F); - b43_radio_write16(dev, 0x0034, 0x008F); - b43_radio_write16(dev, 0x002C, 0x0007); - b43_radio_write16(dev, 0x0082, 0x0080); - b43_radio_write16(dev, 0x0080, 0x0000); - b43_radio_write16(dev, 0x003F, 0x00DA); - b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); - msleep(1); /* delay 400usec */ - - b43_radio_write16(dev, 0x0081, - (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010); - msleep(1); /* delay 400usec */ - - b43_radio_write16(dev, 0x0005, - (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008); - b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010); - b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040); - b43_radio_write16(dev, 0x0081, - (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040); - b43_radio_write16(dev, 0x0005, - (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); - b43_phy_write(dev, 0x0063, 0xDDC6); - b43_phy_write(dev, 0x0069, 0x07BE); - b43_phy_write(dev, 0x006A, 0x0000); - - err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_A, 0); - B43_WARN_ON(err); + if (phy->analog == 1) { + b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) + | 0x0050); + } + if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && + (bus->boardinfo.type != SSB_BOARD_BU4306)) { + value = 0x2120; + for (offset = 0x00A8; offset < 0x00C7; offset++) { + b43_phy_write(dev, offset, value); + value += 0x202; + } + } + b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF) + | 0x0700); + if (phy->radio_ver == 0x2050) + b43_phy_write(dev, 0x0038, 0x0667); - msleep(1); + if (phy->gmode || phy->rev >= 2) { + if (phy->radio_ver == 0x2050) { + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) + | 0x0020); + b43_radio_write16(dev, 0x0051, + b43_radio_read16(dev, 0x0051) + | 0x0004); + } + b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); + + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); + b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); + + b43_phy_write(dev, 0x001C, 0x186A); + + b43_phy_write(dev, 0x0013, + (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900); + b43_phy_write(dev, 0x0035, + (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064); + b43_phy_write(dev, 0x005D, + (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); + } + + if (dev->bad_frames_preempt) { + b43_phy_write(dev, B43_PHY_RADIO_BITFIELD, + b43_phy_read(dev, + B43_PHY_RADIO_BITFIELD) | (1 << 11)); + } + + if (phy->analog == 1) { + b43_phy_write(dev, 0x0026, 0xCE00); + b43_phy_write(dev, 0x0021, 0x3763); + b43_phy_write(dev, 0x0022, 0x1BC3); + b43_phy_write(dev, 0x0023, 0x06F9); + b43_phy_write(dev, 0x0024, 0x037E); + } else + b43_phy_write(dev, 0x0026, 0xCC00); + b43_phy_write(dev, 0x0030, 0x00C6); + b43_write16(dev, 0x03EC, 0x3F22); + + if (phy->analog == 1) + b43_phy_write(dev, 0x0020, 0x3E1C); + else + b43_phy_write(dev, 0x0020, 0x301C); + + if (phy->analog == 0) + b43_write16(dev, 0x03E4, 0x3000); + + old_channel = phy->channel; + /* Force to channel 7, even if not supported. */ + b43_gphy_channel_switch(dev, 7, 0); + + if (phy->radio_ver != 0x2050) { + b43_radio_write16(dev, 0x0075, 0x0080); + b43_radio_write16(dev, 0x0079, 0x0081); + } + + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x0050, 0x0023); + + if (phy->radio_ver == 0x2050) { + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x005A, 0x0070); + } + + b43_radio_write16(dev, 0x005B, 0x007B); + b43_radio_write16(dev, 0x005C, 0x00B0); + + b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007); + + b43_gphy_channel_switch(dev, old_channel, 0); + + b43_phy_write(dev, 0x0014, 0x0080); + b43_phy_write(dev, 0x0032, 0x00CA); + b43_phy_write(dev, 0x002A, 0x88A3); + + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); + + if (phy->radio_ver == 0x2050) + b43_radio_write16(dev, 0x005D, 0x000D); + + b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); } -static inline u16 freq_r3A_value(u16 frequency) +static void b43_phy_initb6(struct b43_wldev *dev) { - u16 value; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 offset, val; + u8 old_channel; + + b43_phy_write(dev, 0x003E, 0x817A); + b43_radio_write16(dev, 0x007A, + (b43_radio_read16(dev, 0x007A) | 0x0058)); + if (phy->radio_rev == 4 || phy->radio_rev == 5) { + b43_radio_write16(dev, 0x51, 0x37); + b43_radio_write16(dev, 0x52, 0x70); + b43_radio_write16(dev, 0x53, 0xB3); + b43_radio_write16(dev, 0x54, 0x9B); + b43_radio_write16(dev, 0x5A, 0x88); + b43_radio_write16(dev, 0x5B, 0x88); + b43_radio_write16(dev, 0x5D, 0x88); + b43_radio_write16(dev, 0x5E, 0x88); + b43_radio_write16(dev, 0x7D, 0x88); + b43_hf_write(dev, b43_hf_read(dev) + | B43_HF_TSSIRPSMW); + } + B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x51, 0); + b43_radio_write16(dev, 0x52, 0x40); + b43_radio_write16(dev, 0x53, 0xB7); + b43_radio_write16(dev, 0x54, 0x98); + b43_radio_write16(dev, 0x5A, 0x88); + b43_radio_write16(dev, 0x5B, 0x6B); + b43_radio_write16(dev, 0x5C, 0x0F); + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { + b43_radio_write16(dev, 0x5D, 0xFA); + b43_radio_write16(dev, 0x5E, 0xD8); + } else { + b43_radio_write16(dev, 0x5D, 0xF5); + b43_radio_write16(dev, 0x5E, 0xB8); + } + b43_radio_write16(dev, 0x0073, 0x0003); + b43_radio_write16(dev, 0x007D, 0x00A8); + b43_radio_write16(dev, 0x007C, 0x0001); + b43_radio_write16(dev, 0x007E, 0x0008); + } + val = 0x1E1F; + for (offset = 0x0088; offset < 0x0098; offset++) { + b43_phy_write(dev, offset, val); + val -= 0x0202; + } + val = 0x3E3F; + for (offset = 0x0098; offset < 0x00A8; offset++) { + b43_phy_write(dev, offset, val); + val -= 0x0202; + } + val = 0x2120; + for (offset = 0x00A8; offset < 0x00C8; offset++) { + b43_phy_write(dev, offset, (val & 0x3F3F)); + val += 0x0202; + } + if (phy->type == B43_PHYTYPE_G) { + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0020); + b43_radio_write16(dev, 0x0051, + b43_radio_read16(dev, 0x0051) | 0x0004); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); + b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); + b43_phy_write(dev, 0x5B, 0); + b43_phy_write(dev, 0x5C, 0); + } + + old_channel = phy->channel; + if (old_channel >= 8) + b43_gphy_channel_switch(dev, 1, 0); + else + b43_gphy_channel_switch(dev, 13, 0); + + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x0050, 0x0023); + udelay(40); + if (phy->radio_rev < 6 || phy->radio_rev == 8) { + b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) + | 0x0002)); + b43_radio_write16(dev, 0x50, 0x20); + } + if (phy->radio_rev <= 2) { + b43_radio_write16(dev, 0x7C, 0x20); + b43_radio_write16(dev, 0x5A, 0x70); + b43_radio_write16(dev, 0x5B, 0x7B); + b43_radio_write16(dev, 0x5C, 0xB0); + } + b43_radio_write16(dev, 0x007A, + (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007); + + b43_gphy_channel_switch(dev, old_channel, 0); - if (frequency < 5091) - value = 0x0040; - else if (frequency < 5321) - value = 0x0000; - else if (frequency < 5806) - value = 0x0080; + b43_phy_write(dev, 0x0014, 0x0200); + if (phy->radio_rev >= 6) + b43_phy_write(dev, 0x2A, 0x88C2); else - value = 0x0040; + b43_phy_write(dev, 0x2A, 0x8AC0); + b43_phy_write(dev, 0x0038, 0x0668); + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); + if (phy->radio_rev <= 5) { + b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D) + & 0xFF80) | 0x0003); + } + if (phy->radio_rev <= 2) + b43_radio_write16(dev, 0x005D, 0x000D); - return value; + if (phy->analog == 4) { + b43_write16(dev, 0x3E4, 9); + b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61) + & 0x0FFF); + } else { + b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) + | 0x0004); + } + if (phy->type == B43_PHYTYPE_B) + B43_WARN_ON(1); + else if (phy->type == B43_PHYTYPE_G) + b43_write16(dev, 0x03E6, 0x0); } -void b43_radio_set_tx_iq(struct b43_wldev *dev) +static void b43_calc_loopback_gain(struct b43_wldev *dev) { - static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; - static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; - u16 tmp = b43_radio_read16(dev, 0x001E); - int i, j; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 backup_phy[16] = { 0 }; + u16 backup_radio[3]; + u16 backup_bband; + u16 i, j, loop_i_max; + u16 trsw_rx; + u16 loop1_outer_done, loop1_inner_done; - for (i = 0; i < 5; i++) { - for (j = 0; j < 5; j++) { - if (tmp == (data_high[i] << 4 | data_low[j])) { - b43_phy_write(dev, 0x0069, - (i - j) << 8 | 0x00C0); - return; + backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); + backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); + backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); + backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); + backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); + } + backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); + backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); + backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); + backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); + backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); + backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); + backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); + backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); + backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); + backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); + backup_bband = gphy->bbatt.att; + backup_radio[0] = b43_radio_read16(dev, 0x52); + backup_radio[1] = b43_radio_read16(dev, 0x43); + backup_radio[2] = b43_radio_read16(dev, 0x7A); + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF); + b43_phy_write(dev, B43_PHY_CCKBBANDCFG, + b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFE); + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFD); + } + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xFFCF) | 0x10); + + b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); + b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); + b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); + + b43_phy_write(dev, B43_PHY_CCK(0x0A), + b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFB); + } + b43_phy_write(dev, B43_PHY_CCK(0x03), + (b43_phy_read(dev, B43_PHY_CCK(0x03)) + & 0xFF9F) | 0x40); + + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x43, 0x000F); + } else { + b43_radio_write16(dev, 0x52, 0); + b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) + & 0xFFF0) | 0x9); + } + b43_gphy_set_baseband_attenuation(dev, 11); + + if (phy->rev >= 3) + b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); + else + b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); + b43_phy_write(dev, B43_PHY_LO_CTL, 0); + + b43_phy_write(dev, B43_PHY_CCK(0x2B), + (b43_phy_read(dev, B43_PHY_CCK(0x2B)) + & 0xFFC0) | 0x01); + b43_phy_write(dev, B43_PHY_CCK(0x2B), + (b43_phy_read(dev, B43_PHY_CCK(0x2B)) + & 0xC0FF) | 0x800); + + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); + + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { + if (phy->rev >= 7) { + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) + | 0x0800); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) + | 0x8000); + } + } + b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A) + & 0x00F7); + + j = 0; + loop_i_max = (phy->radio_rev == 8) ? 15 : 9; + for (i = 0; i < loop_i_max; i++) { + for (j = 0; j < 16; j++) { + b43_radio_write16(dev, 0x43, i); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xF0FF) | (j << 8)); + b43_phy_write(dev, B43_PHY_PGACTL, + (b43_phy_read(dev, B43_PHY_PGACTL) + & 0x0FFF) | 0xA000); + b43_phy_write(dev, B43_PHY_PGACTL, + b43_phy_read(dev, B43_PHY_PGACTL) + | 0xF000); + udelay(20); + if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) + goto exit_loop1; + } + } + exit_loop1: + loop1_outer_done = i; + loop1_inner_done = j; + if (j >= 8) { + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) + | 0x30); + trsw_rx = 0x1B; + for (j = j - 8; j < 16; j++) { + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xF0FF) | (j << 8)); + b43_phy_write(dev, B43_PHY_PGACTL, + (b43_phy_read(dev, B43_PHY_PGACTL) + & 0x0FFF) | 0xA000); + b43_phy_write(dev, B43_PHY_PGACTL, + b43_phy_read(dev, B43_PHY_PGACTL) + | 0xF000); + udelay(20); + trsw_rx -= 3; + if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) + goto exit_loop2; + } + } else + trsw_rx = 0x18; + exit_loop2: + + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); + } + b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); + b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); + b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); + b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); + b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); + b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); + b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); + b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); + b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); + + b43_gphy_set_baseband_attenuation(dev, backup_bband); + + b43_radio_write16(dev, 0x52, backup_radio[0]); + b43_radio_write16(dev, 0x43, backup_radio[1]); + b43_radio_write16(dev, 0x7A, backup_radio[2]); + + b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); + udelay(10); + b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); + b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); + b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); + b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); + + gphy->max_lb_gain = + ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; + gphy->trsw_rx_gain = trsw_rx * 2; +} + +static void b43_hardware_pctl_early_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + + if (!b43_has_hardware_pctl(dev)) { + b43_phy_write(dev, 0x047A, 0xC111); + return; + } + + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF); + b43_phy_write(dev, 0x002F, 0x0202); + b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002); + b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000); + if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { + b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) + & 0xFF0F) | 0x0010); + b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) + | 0x8000); + b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) + & 0xFFC0) | 0x0010); + b43_phy_write(dev, 0x002E, 0xC07F); + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0400); + } else { + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0200); + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0400); + b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) + & 0x7FFF); + b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F) + & 0xFFFE); + b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) + & 0xFFC0) | 0x0010); + b43_phy_write(dev, 0x002E, 0xC07F); + b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) + & 0xFF0F) | 0x0010); + } +} + +/* Hardware power control for G-PHY */ +static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + if (!b43_has_hardware_pctl(dev)) { + /* No hardware power control */ + b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); + return; + } + + b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0) + | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); + b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00) + | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); + b43_gphy_tssi_power_lt_init(dev); + b43_gphy_gain_lt_init(dev); + b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF); + b43_phy_write(dev, 0x0014, 0x0000); + + B43_WARN_ON(phy->rev < 6); + b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) + | 0x0800); + b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) + & 0xFEFF); + b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) + & 0xFFBF); + + b43_gphy_dc_lt_init(dev, 1); + + /* Enable hardware pctl in firmware. */ + b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); +} + +/* Intialize B/G PHY power control */ +static void b43_phy_init_pctl(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + struct b43_rfatt old_rfatt; + struct b43_bbatt old_bbatt; + u8 old_tx_control = 0; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (bus->boardinfo.type == SSB_BOARD_BU4306)) + return; + + b43_phy_write(dev, 0x0028, 0x8018); + + /* This does something with the Analog... */ + b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) + & 0xFFDF); + + if (!phy->gmode) + return; + b43_hardware_pctl_early_init(dev); + if (gphy->cur_idle_tssi == 0) { + if (phy->radio_ver == 0x2050 && phy->analog == 0) { + b43_radio_write16(dev, 0x0076, + (b43_radio_read16(dev, 0x0076) + & 0x00F7) | 0x0084); + } else { + struct b43_rfatt rfatt; + struct b43_bbatt bbatt; + + memcpy(&old_rfatt, &gphy->rfatt, sizeof(old_rfatt)); + memcpy(&old_bbatt, &gphy->bbatt, sizeof(old_bbatt)); + old_tx_control = gphy->tx_control; + + bbatt.att = 11; + if (phy->radio_rev == 8) { + rfatt.att = 15; + rfatt.with_padmix = 1; + } else { + rfatt.att = 9; + rfatt.with_padmix = 0; } + b43_set_txpower_g(dev, &bbatt, &rfatt, 0); + } + b43_dummy_transmission(dev); + gphy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); + if (B43_DEBUG) { + /* Current-Idle-TSSI sanity check. */ + if (abs(gphy->cur_idle_tssi - gphy->tgt_idle_tssi) >= 20) { + b43dbg(dev->wl, + "!WARNING! Idle-TSSI phy->cur_idle_tssi " + "measuring failed. (cur=%d, tgt=%d). Disabling TX power " + "adjustment.\n", gphy->cur_idle_tssi, + gphy->tgt_idle_tssi); + gphy->cur_idle_tssi = 0; + } + } + if (phy->radio_ver == 0x2050 && phy->analog == 0) { + b43_radio_write16(dev, 0x0076, + b43_radio_read16(dev, 0x0076) + & 0xFF7B); + } else { + b43_set_txpower_g(dev, &old_bbatt, + &old_rfatt, old_tx_control); } } + b43_hardware_pctl_init_gphy(dev); + b43_shm_clear_tssi(dev); } -int b43_radio_selectchannel(struct b43_wldev *dev, - u8 channel, int synthetic_pu_workaround) +static void b43_phy_initg(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - u16 r8, tmp; - u16 freq; - u16 channelcookie, savedcookie; - int err = 0; - - if (channel == 0xFF) { - switch (phy->type) { - case B43_PHYTYPE_A: - channel = B43_DEFAULT_CHANNEL_A; - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - channel = B43_DEFAULT_CHANNEL_BG; - break; - case B43_PHYTYPE_N: - //FIXME check if we are on 2.4GHz or 5GHz and set a default channel. - channel = 1; - break; - default: - B43_WARN_ON(1); + struct b43_phy_g *gphy = phy->g; + u16 tmp; + + if (phy->rev == 1) + b43_phy_initb5(dev); + else + b43_phy_initb6(dev); + + if (phy->rev >= 2 || phy->gmode) + b43_phy_inita(dev); + + if (phy->rev >= 2) { + b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); + } + if (phy->rev == 2) { + b43_phy_write(dev, B43_PHY_RFOVER, 0); + b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); + } + if (phy->rev > 5) { + b43_phy_write(dev, B43_PHY_RFOVER, 0x400); + b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); + } + if (phy->gmode || phy->rev >= 2) { + tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); + tmp &= B43_PHYVER_VERSION; + if (tmp == 3 || tmp == 5) { + b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); + b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); } + if (tmp == 5) { + b43_phy_write(dev, B43_PHY_OFDM(0xCC), + (b43_phy_read(dev, B43_PHY_OFDM(0xCC)) + & 0x00FF) | 0x1F00); + } + } + if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) + b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); + if (phy->radio_rev == 8) { + b43_phy_write(dev, B43_PHY_EXTG(0x01), + b43_phy_read(dev, B43_PHY_EXTG(0x01)) + | 0x80); + b43_phy_write(dev, B43_PHY_OFDM(0x3E), + b43_phy_read(dev, B43_PHY_OFDM(0x3E)) + | 0x4); + } + if (has_loopback_gain(phy)) + b43_calc_loopback_gain(dev); + + if (phy->radio_rev != 8) { + if (gphy->initval == 0xFFFF) + gphy->initval = b43_radio_init2050(dev); + else + b43_radio_write16(dev, 0x0078, gphy->initval); + } + b43_lo_g_init(dev); + if (has_tx_magnification(phy)) { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFF00) + | gphy->lo_control->tx_bias | gphy-> + lo_control->tx_magn); + } else { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFFF0) + | gphy->lo_control->tx_bias); + } + if (phy->rev >= 6) { + b43_phy_write(dev, B43_PHY_CCK(0x36), + (b43_phy_read(dev, B43_PHY_CCK(0x36)) + & 0x0FFF) | (gphy->lo_control-> + tx_bias << 12)); + } + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); + else + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); + if (phy->rev < 2) + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); + else + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); + if (phy->gmode || phy->rev >= 2) { + b43_lo_g_adjust(dev); + b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); } - /* First we set the channel radio code to prevent the - * firmware from sending ghost packets. - */ - channelcookie = channel; - if (0 /*FIXME on 5Ghz */) - channelcookie |= 0x100; - //FIXME set 40Mhz flag if required - savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); - - switch (phy->type) { - case B43_PHYTYPE_A: - if (channel > 200) { - err = -EINVAL; - goto out; + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + /* The specs state to update the NRSSI LT with + * the value 0x7FFFFFFF here. I think that is some weird + * compiler optimization in the original driver. + * Essentially, what we do here is resetting all NRSSI LT + * entries to -32 (see the clamp_val() in nrssi_hw_update()) + */ + b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? + b43_calc_nrssi_threshold(dev); + } else if (phy->gmode || phy->rev >= 2) { + if (gphy->nrssi[0] == -1000) { + B43_WARN_ON(gphy->nrssi[1] != -1000); + b43_calc_nrssi_slope(dev); + } else + b43_calc_nrssi_threshold(dev); + } + if (phy->radio_rev == 8) + b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); + b43_phy_init_pctl(dev); + /* FIXME: The spec says in the following if, the 0 should be replaced + 'if OFDM may not be used in the current locale' + but OFDM is legal everywhere */ + if ((dev->dev->bus->chip_id == 0x4306 + && dev->dev->bus->chip_package == 2) || 0) { + b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0) + & 0xBFFF); + b43_phy_write(dev, B43_PHY_OFDM(0xC3), + b43_phy_read(dev, B43_PHY_OFDM(0xC3)) + & 0x7FFF); + } +} + +void b43_gphy_channel_switch(struct b43_wldev *dev, + unsigned int channel, + bool synthetic_pu_workaround) +{ + if (synthetic_pu_workaround) + b43_synth_pu_workaround(dev, channel); + + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); + + if (channel == 14) { + if (dev->dev->bus->sprom.country_code == + SSB_SPROM1CCODE_JAPAN) + b43_hf_write(dev, + b43_hf_read(dev) & ~B43_HF_ACPR); + else + b43_hf_write(dev, + b43_hf_read(dev) | B43_HF_ACPR); + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + | (1 << 11)); + } else { + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + & 0xF7BF); + } +} + +static void default_baseband_attenuation(struct b43_wldev *dev, + struct b43_bbatt *bb) +{ + struct b43_phy *phy = &dev->phy; + + if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) + bb->att = 0; + else + bb->att = 2; +} + +static void default_radio_attenuation(struct b43_wldev *dev, + struct b43_rfatt *rf) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + + rf->with_padmix = 0; + + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && + bus->boardinfo.type == SSB_BOARD_BCM4309G) { + if (bus->boardinfo.rev < 0x43) { + rf->att = 2; + return; + } else if (bus->boardinfo.rev < 0x51) { + rf->att = 3; + return; } - freq = channel2freq_a(channel); - - r8 = b43_radio_read16(dev, 0x0008); - b43_write16(dev, 0x03F0, freq); - b43_radio_write16(dev, 0x0008, r8); - - //TODO: write max channel TX power? to Radio 0x2D - tmp = b43_radio_read16(dev, 0x002E); - tmp &= 0x0080; - //TODO: OR tmp with the Power out estimation for this channel? - b43_radio_write16(dev, 0x002E, tmp); - - if (freq >= 4920 && freq <= 5500) { - /* - * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; - * = (freq * 0.025862069 - */ - r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ + } + + if (phy->type == B43_PHYTYPE_A) { + rf->att = 0x60; + return; + } + + switch (phy->radio_ver) { + case 0x2053: + switch (phy->radio_rev) { + case 1: + rf->att = 6; + return; } - b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022) - & 0x000F) | (r8 << 4)); - b43_radio_write16(dev, 0x002A, (r8 << 4)); - b43_radio_write16(dev, 0x002B, (r8 << 4)); - b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008) - & 0x00F0) | (r8 << 4)); - b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029) - & 0xFF0F) | 0x00B0); - b43_radio_write16(dev, 0x0035, 0x00AA); - b43_radio_write16(dev, 0x0036, 0x0085); - b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A) - & 0xFF20) | - freq_r3A_value(freq)); - b43_radio_write16(dev, 0x003D, - b43_radio_read16(dev, 0x003D) & 0x00FF); - b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081) - & 0xFF7F) | 0x0080); - b43_radio_write16(dev, 0x0035, - b43_radio_read16(dev, 0x0035) & 0xFFEF); - b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035) - & 0xFFEF) | 0x0010); - b43_radio_set_tx_iq(dev); - //TODO: TSSI2dbm workaround - b43_phy_xmitpower(dev); //FIXME correct? break; - case B43_PHYTYPE_G: - if ((channel < 1) || (channel > 14)) { - err = -EINVAL; - goto out; + case 0x2050: + switch (phy->radio_rev) { + case 0: + rf->att = 5; + return; + case 1: + if (phy->type == B43_PHYTYPE_G) { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 3; + else if (bus->boardinfo.vendor == + SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == + SSB_BOARD_BU4306) + rf->att = 3; + else + rf->att = 1; + } else { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 7; + else + rf->att = 6; + } + return; + case 2: + if (phy->type == B43_PHYTYPE_G) { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 3; + else if (bus->boardinfo.vendor == + SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == + SSB_BOARD_BU4306) + rf->att = 5; + else if (bus->chip_id == 0x4320) + rf->att = 4; + else + rf->att = 3; + } else + rf->att = 6; + return; + case 3: + rf->att = 5; + return; + case 4: + case 5: + rf->att = 1; + return; + case 6: + case 7: + rf->att = 5; + return; + case 8: + rf->att = 0xA; + rf->with_padmix = 1; + return; + case 9: + default: + rf->att = 5; + return; } + } + rf->att = 5; +} - if (synthetic_pu_workaround) - b43_synth_pu_workaround(dev, channel); +static u16 default_tx_control(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); + if (phy->radio_ver != 0x2050) + return 0; + if (phy->radio_rev == 1) + return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; + if (phy->radio_rev < 6) + return B43_TXCTL_PA2DB; + if (phy->radio_rev == 8) + return B43_TXCTL_TXMIX; + return 0; +} - if (channel == 14) { - if (dev->dev->bus->sprom.country_code == - SSB_SPROM1CCODE_JAPAN) - b43_hf_write(dev, - b43_hf_read(dev) & ~B43_HF_ACPR); - else - b43_hf_write(dev, - b43_hf_read(dev) | B43_HF_ACPR); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - | (1 << 11)); - } else { - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - & 0xF7BF); +static u8 b43_gphy_aci_detect(struct b43_wldev *dev, u8 channel) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u8 ret = 0; + u16 saved, rssi, temp; + int i, j = 0; + + saved = b43_phy_read(dev, 0x0403); + b43_switch_channel(dev, channel); + b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); + if (gphy->aci_hw_rssi) + rssi = b43_phy_read(dev, 0x048A) & 0x3F; + else + rssi = saved & 0x3F; + /* clamp temp to signed 5bit */ + if (rssi > 32) + rssi -= 64; + for (i = 0; i < 100; i++) { + temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; + if (temp > 32) + temp -= 64; + if (temp < rssi) + j++; + if (j >= 20) + ret = 1; + } + b43_phy_write(dev, 0x0403, saved); + + return ret; +} + +static u8 b43_gphy_aci_scan(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + u8 ret[13]; + unsigned int channel = phy->channel; + unsigned int i, j, start, end; + + if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) + return 0; + + b43_phy_lock(dev); + b43_radio_lock(dev); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); + b43_set_all_gains(dev, 3, 8, 1); + + start = (channel - 5 > 0) ? channel - 5 : 1; + end = (channel + 5 < 14) ? channel + 5 : 13; + + for (i = start; i <= end; i++) { + if (abs(channel - i) > 2) + ret[i - 1] = b43_gphy_aci_detect(dev, i); + } + b43_switch_channel(dev, channel); + b43_phy_write(dev, 0x0802, + (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003); + b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); + b43_set_original_gains(dev); + for (i = 0; i < 13; i++) { + if (!ret[i]) + continue; + end = (i + 5 < 13) ? i + 5 : 13; + for (j = i; j < end; j++) + ret[j] = 1; + } + b43_radio_unlock(dev); + b43_phy_unlock(dev); + + return ret[channel - 1]; +} + +static s32 b43_tssi2dbm_ad(s32 num, s32 den) +{ + if (num < 0) + return num / den; + else + return (num + den / 2) / den; +} + +static s8 b43_tssi2dbm_entry(s8 entry[], u8 index, + s16 pab0, s16 pab1, s16 pab2) +{ + s32 m1, m2, f = 256, q, delta; + s8 i = 0; + + m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); + m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); + do { + if (i > 15) + return -EINVAL; + q = b43_tssi2dbm_ad(f * 4096 - + b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); + delta = abs(q - f); + f = q; + i++; + } while (delta >= 2); + entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); + return 0; +} + +u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, + s16 pab0, s16 pab1, s16 pab2) +{ + unsigned int i; + u8 *tab; + int err; + + tab = kmalloc(64, GFP_KERNEL); + if (!tab) { + b43err(dev->wl, "Could not allocate memory " + "for tssi2dbm table\n"); + return NULL; + } + for (i = 0; i < 64; i++) { + err = b43_tssi2dbm_entry(tab, i, pab0, pab1, pab2); + if (err) { + b43err(dev->wl, "Could not generate " + "tssi2dBm table\n"); + kfree(tab); + return NULL; } - break; - case B43_PHYTYPE_N: - err = b43_nphy_selectchannel(dev, channel); - if (err) - goto out; - break; - default: - B43_WARN_ON(1); } - phy->channel = channel; - /* Wait for the radio to tune to the channel and stabilize. */ - msleep(8); -out: - if (err) { - b43_shm_write16(dev, B43_SHM_SHARED, - B43_SHM_SH_CHAN, savedcookie); + return tab; +} + +/* Initialise the TSSI->dBm lookup table */ +static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + s16 pab0, pab1, pab2; + + pab0 = (s16) (dev->dev->bus->sprom.pa0b0); + pab1 = (s16) (dev->dev->bus->sprom.pa0b1); + pab2 = (s16) (dev->dev->bus->sprom.pa0b2); + + B43_WARN_ON((dev->dev->bus->chip_id == 0x4301) && + (phy->radio_ver != 0x2050)); /* Not supported anymore */ + + gphy->dyn_tssi_tbl = 0; + + if (pab0 != 0 && pab1 != 0 && pab2 != 0 && + pab0 != -1 && pab1 != -1 && pab2 != -1) { + /* The pabX values are set in SPROM. Use them. */ + if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && + (s8) dev->dev->bus->sprom.itssi_bg != -1) { + gphy->tgt_idle_tssi = + (s8) (dev->dev->bus->sprom.itssi_bg); + } else + gphy->tgt_idle_tssi = 62; + gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, + pab1, pab2); + if (!gphy->tssi2dbm) + return -ENOMEM; + gphy->dyn_tssi_tbl = 1; + } else { + /* pabX values not set in SPROM. */ + gphy->tgt_idle_tssi = 52; + gphy->tssi2dbm = b43_tssi2dbm_g_table; } + + return 0; +} + +static int b43_gphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_g *gphy; + struct b43_txpower_lo_control *lo; + int err; + + gphy = kzalloc(sizeof(*gphy), GFP_KERNEL); + if (!gphy) { + err = -ENOMEM; + goto error; + } + dev->phy.g = gphy; + + lo = kzalloc(sizeof(*lo), GFP_KERNEL); + if (!lo) { + err = -ENOMEM; + goto err_free_gphy; + } + gphy->lo_control = lo; + + err = b43_gphy_init_tssi2dbm_table(dev); + if (err) + goto err_free_lo; + + return 0; + +err_free_lo: + kfree(lo); +err_free_gphy: + kfree(gphy); +error: return err; } -void b43_radio_turn_on(struct b43_wldev *dev) +static void b43_gphy_op_prepare_structs(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err; - u8 channel; + struct b43_phy_g *gphy = phy->g; + const void *tssi2dbm; + int tgt_idle_tssi; + struct b43_txpower_lo_control *lo; + unsigned int i; + + /* tssi2dbm table is constant, so it is initialized at alloc time. + * Save a copy of the pointer. */ + tssi2dbm = gphy->tssi2dbm; + tgt_idle_tssi = gphy->tgt_idle_tssi; + /* Save the LO pointer. */ + lo = gphy->lo_control; + + /* Zero out the whole PHY structure. */ + memset(gphy, 0, sizeof(*gphy)); + + /* Restore pointers. */ + gphy->tssi2dbm = tssi2dbm; + gphy->tgt_idle_tssi = tgt_idle_tssi; + gphy->lo_control = lo; + + memset(gphy->minlowsig, 0xFF, sizeof(gphy->minlowsig)); + + /* NRSSI */ + for (i = 0; i < ARRAY_SIZE(gphy->nrssi); i++) + gphy->nrssi[i] = -1000; + for (i = 0; i < ARRAY_SIZE(gphy->nrssi_lt); i++) + gphy->nrssi_lt[i] = i; + + gphy->lofcal = 0xFFFF; + gphy->initval = 0xFFFF; + + gphy->interfmode = B43_INTERFMODE_NONE; + + /* OFDM-table address caching. */ + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; + + gphy->average_tssi = 0xFF; + + /* Local Osciallator structure */ + lo->tx_bias = 0xFF; + INIT_LIST_HEAD(&lo->calib_list); +} + +static void b43_gphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + kfree(gphy->lo_control); + + if (gphy->dyn_tssi_tbl) + kfree(gphy->tssi2dbm); + gphy->dyn_tssi_tbl = 0; + gphy->tssi2dbm = NULL; + + kfree(gphy); + dev->phy.g = NULL; +} + +static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + default_baseband_attenuation(dev, &gphy->bbatt); + default_radio_attenuation(dev, &gphy->rfatt); + gphy->tx_control = (default_tx_control(dev) << 4); + generate_rfatt_list(dev, &lo->rfatt_list); + generate_bbatt_list(dev, &lo->bbatt_list); + + /* Commit previous writes */ + b43_read32(dev, B43_MMIO_MACCTL); + + if (phy->rev == 1) { + /* Workaround: Temporarly disable gmode through the early init + * phase, as the gmode stuff is not needed for phy rev 1 */ + phy->gmode = 0; + b43_wireless_core_reset(dev, 0); + b43_phy_initg(dev); + phy->gmode = 1; + b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); + } + + return 0; +} + +static int b43_gphy_op_init(struct b43_wldev *dev) +{ + b43_phy_initg(dev); + + return 0; +} + +static void b43_gphy_op_exit(struct b43_wldev *dev) +{ + b43_lo_g_cleanup(dev); +} + +static u16 b43_gphy_op_read(struct b43_wldev *dev, u16 reg) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_gphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_gphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* G-PHY needs 0x80 for read access. */ + reg |= 0x80; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_gphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev) +{ + return (dev->phy.rev >= 6); +} + +static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int channel; might_sleep(); - if (phy->radio_on) - return; + if (state == RFKILL_STATE_UNBLOCKED) { + /* Turn radio ON */ + if (phy->radio_on) + return; - switch (phy->type) { - case B43_PHYTYPE_A: - b43_radio_write16(dev, 0x0004, 0x00C0); - b43_radio_write16(dev, 0x0005, 0x0008); - b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7); - b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7); - b43_radio_init2060(dev); - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: b43_phy_write(dev, 0x0015, 0x8000); b43_phy_write(dev, 0x0015, 0xCC00); b43_phy_write(dev, 0x0015, (phy->gmode ? 0x00C0 : 0x0000)); - if (phy->radio_off_context.valid) { + if (gphy->radio_off_context.valid) { /* Restore the RFover values. */ b43_phy_write(dev, B43_PHY_RFOVER, - phy->radio_off_context.rfover); + gphy->radio_off_context.rfover); b43_phy_write(dev, B43_PHY_RFOVERVAL, - phy->radio_off_context.rfoverval); - phy->radio_off_context.valid = 0; + gphy->radio_off_context.rfoverval); + gphy->radio_off_context.valid = 0; } channel = phy->channel; - err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_BG, 1); - err |= b43_radio_selectchannel(dev, channel, 0); - B43_WARN_ON(err); - break; - case B43_PHYTYPE_N: - b43_nphy_radio_turn_on(dev); - break; - default: - B43_WARN_ON(1); + b43_gphy_channel_switch(dev, 6, 1); + b43_gphy_channel_switch(dev, channel, 0); + } else { + /* Turn radio OFF */ + u16 rfover, rfoverval; + + rfover = b43_phy_read(dev, B43_PHY_RFOVER); + rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); + gphy->radio_off_context.rfover = rfover; + gphy->radio_off_context.rfoverval = rfoverval; + gphy->radio_off_context.valid = 1; + b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); + b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); } - phy->radio_on = 1; } -void b43_radio_turn_off(struct b43_wldev *dev, bool force) +static int b43_gphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if ((new_channel < 1) || (new_channel > 14)) + return -EINVAL; + b43_gphy_channel_switch(dev, new_channel, 0); + + return 0; +} + +static unsigned int b43_gphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 1; /* Default to channel 1 */ +} + +static void b43_gphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) { struct b43_phy *phy = &dev->phy; + u64 hf; + u16 tmp; + int autodiv = 0; - if (!phy->radio_on && !force) - return; + if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) + autodiv = 1; + + hf = b43_hf_read(dev); + hf &= ~B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); + + tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); + tmp &= ~B43_PHY_BBANDCFG_RXANT; + tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) + << B43_PHY_BBANDCFG_RXANT_SHIFT; + b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); + + if (autodiv) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + if (antenna == B43_ANTENNA_AUTO0) + tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; + else + tmp |= B43_PHY_ANTDWELL_AUTODIV1; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } + tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); + if (autodiv) + tmp |= B43_PHY_ANTWRSETT_ARXDIV; + else + tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; + b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); + if (phy->rev >= 2) { + tmp = b43_phy_read(dev, B43_PHY_OFDM61); + tmp |= B43_PHY_OFDM61_10; + b43_phy_write(dev, B43_PHY_OFDM61, tmp); + + tmp = + b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK); + tmp = (tmp & 0xFF00) | 0x15; + b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK, + tmp); + + if (phy->rev == 2) { + b43_phy_write(dev, B43_PHY_ADIVRELATED, + 8); + } else { + tmp = + b43_phy_read(dev, + B43_PHY_ADIVRELATED); + tmp = (tmp & 0xFF00) | 8; + b43_phy_write(dev, B43_PHY_ADIVRELATED, + tmp); + } + } + if (phy->rev >= 6) + b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); + + hf |= B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); +} - switch (phy->type) { - case B43_PHYTYPE_N: - b43_nphy_radio_turn_off(dev); +static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev, + enum b43_interference_mitigation mode) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + int currentmode; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + if ((phy->rev == 0) || (!phy->gmode)) + return -ENODEV; + + gphy->aci_wlan_automatic = 0; + switch (mode) { + case B43_INTERFMODE_AUTOWLAN: + gphy->aci_wlan_automatic = 1; + if (gphy->aci_enable) + mode = B43_INTERFMODE_MANUALWLAN; + else + mode = B43_INTERFMODE_NONE; break; - case B43_PHYTYPE_A: - b43_radio_write16(dev, 0x0004, 0x00FF); - b43_radio_write16(dev, 0x0005, 0x00FB); - b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008); - b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008); + case B43_INTERFMODE_NONE: + case B43_INTERFMODE_NONWLAN: + case B43_INTERFMODE_MANUALWLAN: break; - case B43_PHYTYPE_G: { - u16 rfover, rfoverval; + default: + return -EINVAL; + } - rfover = b43_phy_read(dev, B43_PHY_RFOVER); - rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); - if (!force) { - phy->radio_off_context.rfover = rfover; - phy->radio_off_context.rfoverval = rfoverval; - phy->radio_off_context.valid = 1; + currentmode = gphy->interfmode; + if (currentmode == mode) + return 0; + if (currentmode != B43_INTERFMODE_NONE) + b43_radio_interference_mitigation_disable(dev, currentmode); + + if (mode == B43_INTERFMODE_NONE) { + gphy->aci_enable = 0; + gphy->aci_hw_rssi = 0; + } else + b43_radio_interference_mitigation_enable(dev, mode); + gphy->interfmode = mode; + + return 0; +} + +/* http://bcm-specs.sipsolutions.net/EstimatePowerOut + * This function converts a TSSI value to dBm in Q5.2 + */ +static s8 b43_gphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) +{ + struct b43_phy_g *gphy = dev->phy.g; + s8 dbm; + s32 tmp; + + tmp = (gphy->tgt_idle_tssi - gphy->cur_idle_tssi + tssi); + tmp = clamp_val(tmp, 0x00, 0x3F); + dbm = gphy->tssi2dbm[tmp]; + + return dbm; +} + +static void b43_put_attenuation_into_ranges(struct b43_wldev *dev, + int *_bbatt, int *_rfatt) +{ + int rfatt = *_rfatt; + int bbatt = *_bbatt; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; + + /* Get baseband and radio attenuation values into their permitted ranges. + * Radio attenuation affects power level 4 times as much as baseband. */ + + /* Range constants */ + const int rf_min = lo->rfatt_list.min_val; + const int rf_max = lo->rfatt_list.max_val; + const int bb_min = lo->bbatt_list.min_val; + const int bb_max = lo->bbatt_list.max_val; + + while (1) { + if (rfatt > rf_max && bbatt > bb_max - 4) + break; /* Can not get it into ranges */ + if (rfatt < rf_min && bbatt < bb_min + 4) + break; /* Can not get it into ranges */ + if (bbatt > bb_max && rfatt > rf_max - 1) + break; /* Can not get it into ranges */ + if (bbatt < bb_min && rfatt < rf_min + 1) + break; /* Can not get it into ranges */ + + if (bbatt > bb_max) { + bbatt -= 4; + rfatt += 1; + continue; + } + if (bbatt < bb_min) { + bbatt += 4; + rfatt -= 1; + continue; + } + if (rfatt > rf_max) { + rfatt -= 1; + bbatt += 4; + continue; + } + if (rfatt < rf_min) { + rfatt += 1; + bbatt -= 4; + continue; } - b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); - b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); break; } - default: - B43_WARN_ON(1); + + *_rfatt = clamp_val(rfatt, rf_min, rf_max); + *_bbatt = clamp_val(bbatt, bb_min, bb_max); +} + +static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + int rfatt, bbatt; + u8 tx_control; + + spin_lock_irq(&dev->wl->irq_lock); + + /* Calculate the new attenuation values. */ + bbatt = gphy->bbatt.att; + bbatt += gphy->bbatt_delta; + rfatt = gphy->rfatt.att; + rfatt += gphy->rfatt_delta; + + b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); + tx_control = gphy->tx_control; + if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { + if (rfatt <= 1) { + if (tx_control == 0) { + tx_control = + B43_TXCTL_PA2DB | + B43_TXCTL_TXMIX; + rfatt += 2; + bbatt += 2; + } else if (dev->dev->bus->sprom. + boardflags_lo & + B43_BFL_PACTRL) { + bbatt += 4 * (rfatt - 2); + rfatt = 2; + } + } else if (rfatt > 4 && tx_control) { + tx_control = 0; + if (bbatt < 3) { + rfatt -= 3; + bbatt += 2; + } else { + rfatt -= 2; + bbatt -= 2; + } + } } - phy->radio_on = 0; + /* Save the control values */ + gphy->tx_control = tx_control; + b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); + gphy->rfatt.att = rfatt; + gphy->bbatt.att = bbatt; + + /* We drop the lock early, so we can sleep during hardware + * adjustment. Possible races with op_recalc_txpower are harmless, + * as we will be called once again in case we raced. */ + spin_unlock_irq(&dev->wl->irq_lock); + + if (b43_debug(dev, B43_DBG_XMITPOWER)) + b43dbg(dev->wl, "Adjusting TX power\n"); + + /* Adjust the hardware */ + b43_phy_lock(dev); + b43_radio_lock(dev); + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, + gphy->tx_control); + b43_radio_unlock(dev); + b43_phy_unlock(dev); } + +static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int average_tssi; + int cck_result, ofdm_result; + int estimated_pwr, desired_pwr, pwr_adjust; + int rfatt_delta, bbatt_delta; + unsigned int max_pwr; + + /* First get the average TSSI */ + cck_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_CCK); + ofdm_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_OFDM_G); + if ((cck_result < 0) && (ofdm_result < 0)) { + /* No TSSI information available */ + if (!ignore_tssi) + goto no_adjustment_needed; + cck_result = 0; + ofdm_result = 0; + } + if (cck_result < 0) + average_tssi = ofdm_result; + else if (ofdm_result < 0) + average_tssi = cck_result; + else + average_tssi = (cck_result + ofdm_result) / 2; + /* Merge the average with the stored value. */ + if (likely(gphy->average_tssi != 0xFF)) + average_tssi = (average_tssi + gphy->average_tssi) / 2; + gphy->average_tssi = average_tssi; + B43_WARN_ON(average_tssi >= B43_TSSI_MAX); + + /* Estimate the TX power emission based on the TSSI */ + estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi); + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + max_pwr = dev->dev->bus->sprom.maxpwr_bg; + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + max_pwr -= 3; /* minus 0.75 */ + if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) { + b43warn(dev->wl, + "Invalid max-TX-power value in SPROM.\n"); + max_pwr = INT_TO_Q52(20); /* fake it */ + dev->dev->bus->sprom.maxpwr_bg = max_pwr; + } + + /* Get desired power (in Q5.2) */ + if (phy->desired_txpower < 0) + desired_pwr = INT_TO_Q52(0); + else + desired_pwr = INT_TO_Q52(phy->desired_txpower); + /* And limit it. max_pwr already is Q5.2 */ + desired_pwr = clamp_val(desired_pwr, 0, max_pwr); + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + b43dbg(dev->wl, + "[TX power] current = " Q52_FMT + " dBm, desired = " Q52_FMT + " dBm, max = " Q52_FMT "\n", + Q52_ARG(estimated_pwr), + Q52_ARG(desired_pwr), + Q52_ARG(max_pwr)); + } + + /* Calculate the adjustment delta. */ + pwr_adjust = desired_pwr - estimated_pwr; + if (pwr_adjust == 0) + goto no_adjustment_needed; + + /* RF attenuation delta. */ + rfatt_delta = ((pwr_adjust + 7) / 8); + /* Lower attenuation => Bigger power output. Negate it. */ + rfatt_delta = -rfatt_delta; + + /* Baseband attenuation delta. */ + bbatt_delta = pwr_adjust / 2; + /* Lower attenuation => Bigger power output. Negate it. */ + bbatt_delta = -bbatt_delta; + /* RF att affects power level 4 times as much as + * Baseband attennuation. Subtract it. */ + bbatt_delta -= 4 * rfatt_delta; + + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust; + b43dbg(dev->wl, + "[TX power deltas] %s" Q52_FMT " dBm => " + "bbatt-delta = %d, rfatt-delta = %d\n", + (pwr_adjust < 0 ? "-" : ""), Q52_ARG(dbm), + bbatt_delta, rfatt_delta); + } + /* So do we finally need to adjust something in hardware? */ + if ((rfatt_delta == 0) && (bbatt_delta == 0)) + goto no_adjustment_needed; + + /* Save the deltas for later when we adjust the power. */ + gphy->bbatt_delta = bbatt_delta; + gphy->rfatt_delta = rfatt_delta; + + /* We need to adjust the TX power on the device. */ + return B43_TXPWR_RES_NEED_ADJUST; + +no_adjustment_needed: + return B43_TXPWR_RES_DONE; +} + +static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + //TODO: update_aci_moving_average + if (gphy->aci_enable && gphy->aci_wlan_automatic) { + b43_mac_suspend(dev); + if (!gphy->aci_enable && 1 /*TODO: not scanning? */ ) { + if (0 /*TODO: bunch of conditions */ ) { + phy->ops->interf_mitigation(dev, + B43_INTERFMODE_MANUALWLAN); + } + } else if (0 /*TODO*/) { + if (/*(aci_average > 1000) &&*/ !b43_gphy_aci_scan(dev)) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); + } + b43_mac_enable(dev); + } else if (gphy->interfmode == B43_INTERFMODE_NONWLAN && + phy->rev == 1) { + //TODO: implement rev1 workaround + } + b43_lo_g_maintanance_work(dev); +} + +static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) + return; + + b43_mac_suspend(dev); + b43_calc_nrssi_slope(dev); + if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { + u8 old_chan = phy->channel; + + /* VCO Calibration */ + if (old_chan >= 8) + b43_switch_channel(dev, 1); + else + b43_switch_channel(dev, 13); + b43_switch_channel(dev, old_chan); + } + b43_mac_enable(dev); +} + +const struct b43_phy_operations b43_phyops_g = { + .allocate = b43_gphy_op_allocate, + .free = b43_gphy_op_free, + .prepare_structs = b43_gphy_op_prepare_structs, + .prepare_hardware = b43_gphy_op_prepare_hardware, + .init = b43_gphy_op_init, + .exit = b43_gphy_op_exit, + .phy_read = b43_gphy_op_read, + .phy_write = b43_gphy_op_write, + .radio_read = b43_gphy_op_radio_read, + .radio_write = b43_gphy_op_radio_write, + .supports_hwpctl = b43_gphy_op_supports_hwpctl, + .software_rfkill = b43_gphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_gphy_op_switch_channel, + .get_default_chan = b43_gphy_op_get_default_chan, + .set_rx_antenna = b43_gphy_op_set_rx_antenna, + .interf_mitigation = b43_gphy_op_interf_mitigation, + .recalc_txpower = b43_gphy_op_recalc_txpower, + .adjust_txpower = b43_gphy_op_adjust_txpower, + .pwork_15sec = b43_gphy_op_pwork_15sec, + .pwork_60sec = b43_gphy_op_pwork_60sec, +}; diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h new file mode 100644 index 00000000000..718947fd41a --- /dev/null +++ b/drivers/net/wireless/b43/phy_g.h @@ -0,0 +1,209 @@ +#ifndef LINUX_B43_PHY_G_H_ +#define LINUX_B43_PHY_G_H_ + +/* OFDM PHY registers are defined in the A-PHY header. */ +#include "phy_a.h" + +/* CCK (B) PHY Registers */ +#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ +#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ +#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ +#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ +#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ +#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 +#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ +#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ +#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ +#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ +#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) +#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ +#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ +#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ + +/* Extended G-PHY Registers */ +#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ +#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ +#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ +#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ +#define B43_PHY_GTABNR_SHIFT 10 +#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ +#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ +#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ +#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ +#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ +#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 +#define B43_PHY_RFOVERVAL_LNA 0x7000 +#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 +#define B43_PHY_RFOVERVAL_PGA 0x0F00 +#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 +#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ +#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 +#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ +#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ +#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ +#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ +#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ + + +/*** G-PHY table numbers */ +#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) +#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) +#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) +#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) + +u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); +void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); + + +/* Returns the boolean whether "TX Magnification" is enabled. */ +#define has_tx_magnification(phy) \ + (((phy)->rev >= 2) && \ + ((phy)->radio_ver == 0x2050) && \ + ((phy)->radio_rev == 8)) +/* Card uses the loopback gain stuff */ +#define has_loopback_gain(phy) \ + (((phy)->rev > 1) || ((phy)->gmode)) + +/* Radio Attenuation (RF Attenuation) */ +struct b43_rfatt { + u8 att; /* Attenuation value */ + bool with_padmix; /* Flag, PAD Mixer enabled. */ +}; +struct b43_rfatt_list { + /* Attenuation values list */ + const struct b43_rfatt *list; + u8 len; + /* Minimum/Maximum attenuation values */ + u8 min_val; + u8 max_val; +}; + +/* Returns true, if the values are the same. */ +static inline bool b43_compare_rfatt(const struct b43_rfatt *a, + const struct b43_rfatt *b) +{ + return ((a->att == b->att) && + (a->with_padmix == b->with_padmix)); +} + +/* Baseband Attenuation */ +struct b43_bbatt { + u8 att; /* Attenuation value */ +}; +struct b43_bbatt_list { + /* Attenuation values list */ + const struct b43_bbatt *list; + u8 len; + /* Minimum/Maximum attenuation values */ + u8 min_val; + u8 max_val; +}; + +/* Returns true, if the values are the same. */ +static inline bool b43_compare_bbatt(const struct b43_bbatt *a, + const struct b43_bbatt *b) +{ + return (a->att == b->att); +} + +/* tx_control bits. */ +#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ +#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ +#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ + +struct b43_txpower_lo_control; + +struct b43_phy_g { + /* ACI (adjacent channel interference) flags. */ + bool aci_enable; + bool aci_wlan_automatic; + bool aci_hw_rssi; + + /* Radio switched on/off */ + bool radio_on; + struct { + /* Values saved when turning the radio off. + * They are needed when turning it on again. */ + bool valid; + u16 rfover; + u16 rfoverval; + } radio_off_context; + + u16 minlowsig[2]; + u16 minlowsigpos[2]; + + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* tssi2dbm is kmalloc()ed. Only used for free()ing. */ + bool dyn_tssi_tbl; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi; + /* The current average TSSI. + * Needs irq_lock, as it's updated in the IRQ path. */ + u8 average_tssi; + /* Current TX power level attenuation control values */ + struct b43_bbatt bbatt; + struct b43_rfatt rfatt; + u8 tx_control; /* B43_TXCTL_XXX */ + /* The calculated attenuation deltas that are used later + * when adjusting the actual power output. */ + int bbatt_delta; + int rfatt_delta; + + /* LocalOscillator control values. */ + struct b43_txpower_lo_control *lo_control; + /* Values from b43_calc_loopback_gain() */ + s16 max_lb_gain; /* Maximum Loopback gain in hdB */ + s16 trsw_rx_gain; /* TRSW RX gain in hdB */ + s16 lna_lod_gain; /* LNA lod */ + s16 lna_gain; /* LNA */ + s16 pga_gain; /* PGA */ + + /* Current Interference Mitigation mode */ + int interfmode; + /* Stack of saved values from the Interference Mitigation code. + * Each value in the stack is layed out as follows: + * bit 0-11: offset + * bit 12-15: register ID + * bit 16-32: value + * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT + */ +#define B43_INTERFSTACK_SIZE 26 + u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure + + /* Saved values from the NRSSI Slope calculation */ + s16 nrssi[2]; + s32 nrssislope; + /* In memory nrssi lookup table. */ + s8 nrssi_lt[64]; + + u16 lofcal; + + u16 initval; //FIXME rename? + + /* The device does address auto increment for the OFDM tables. + * We cache the previously used address here and omit the address + * write on the next table access, if possible. */ + u16 ofdmtab_addr; /* The address currently set in hardware. */ + enum { /* The last data flow direction. */ + B43_OFDMTAB_DIRECTION_UNKNOWN = 0, + B43_OFDMTAB_DIRECTION_READ, + B43_OFDMTAB_DIRECTION_WRITE, + } ofdmtab_addr_direction; +}; + +void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, + u16 baseband_attenuation); +void b43_gphy_channel_switch(struct b43_wldev *dev, + unsigned int channel, + bool synthetic_pu_workaround); +u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, + s16 pab0, s16 pab1, s16 pab2); + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_g; + +#endif /* LINUX_B43_PHY_G_H_ */ diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c new file mode 100644 index 00000000000..c5d9dc3667c --- /dev/null +++ b/drivers/net/wireless/b43/phy_lp.c @@ -0,0 +1,155 @@ +/* + + Broadcom B43 wireless driver + IEEE 802.11g LP-PHY driver + + Copyright (c) 2008 Michael Buesch <mb@bu3sch.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "phy_lp.h" +#include "phy_common.h" + + +static int b43_lpphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy; + + lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL); + if (!lpphy) + return -ENOMEM; + dev->phy.lp = lpphy; + + return 0; +} + +static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_lp *lpphy = phy->lp; + + memset(lpphy, 0, sizeof(*lpphy)); + + //TODO +} + +static void b43_lpphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + + kfree(lpphy); + dev->phy.lp = NULL; +} + +static int b43_lpphy_op_init(struct b43_wldev *dev) +{ + //TODO + + return 0; +} + +static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* LP-PHY needs a special bit set for read access */ + if (dev->phy.rev < 2) { + if (reg != 0x4001) + reg |= 0x100; + } else + reg |= 0x200; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + //TODO +} + +static int b43_lpphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + //TODO + return 0; +} + +static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 1; /* Default to channel 1 */ +} + +static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{ + //TODO +} + +static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev) +{ + //TODO +} + +static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + //TODO + return B43_TXPWR_RES_DONE; +} + + +const struct b43_phy_operations b43_phyops_lp = { + .allocate = b43_lpphy_op_allocate, + .free = b43_lpphy_op_free, + .prepare_structs = b43_lpphy_op_prepare_structs, + .init = b43_lpphy_op_init, + .phy_read = b43_lpphy_op_read, + .phy_write = b43_lpphy_op_write, + .radio_read = b43_lpphy_op_radio_read, + .radio_write = b43_lpphy_op_radio_write, + .software_rfkill = b43_lpphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_lpphy_op_switch_channel, + .get_default_chan = b43_lpphy_op_get_default_chan, + .set_rx_antenna = b43_lpphy_op_set_rx_antenna, + .recalc_txpower = b43_lpphy_op_recalc_txpower, + .adjust_txpower = b43_lpphy_op_adjust_txpower, +}; diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h new file mode 100644 index 00000000000..b0b5357abf9 --- /dev/null +++ b/drivers/net/wireless/b43/phy_lp.h @@ -0,0 +1,540 @@ +#ifndef LINUX_B43_PHY_LP_H_ +#define LINUX_B43_PHY_LP_H_ + +/* Definitions for the LP-PHY */ + + + + +#define B43_LP_RADIO(radio_reg) (radio_reg) +#define B43_LP_NORTH(radio_reg) B43_LP_RADIO(radio_reg) +#define B43_LP_SOUTH(radio_reg) B43_LP_RADIO((radio_reg) | 0x4000) + + +/*** Broadcom 2062 NORTH radio registers ***/ +#define B2062_N_COMM1 B43_LP_NORTH(0x000) /* Common 01 (north) */ +#define B2062_N_COMM2 B43_LP_NORTH(0x002) /* Common 02 (north) */ +#define B2062_N_COMM3 B43_LP_NORTH(0x003) /* Common 03 (north) */ +#define B2062_N_COMM4 B43_LP_NORTH(0x004) /* Common 04 (north) */ +#define B2062_N_COMM5 B43_LP_NORTH(0x005) /* Common 05 (north) */ +#define B2062_N_COMM6 B43_LP_NORTH(0x006) /* Common 06 (north) */ +#define B2062_N_COMM7 B43_LP_NORTH(0x007) /* Common 07 (north) */ +#define B2062_N_COMM8 B43_LP_NORTH(0x008) /* Common 08 (north) */ +#define B2062_N_COMM9 B43_LP_NORTH(0x009) /* Common 09 (north) */ +#define B2062_N_COMM10 B43_LP_NORTH(0x00A) /* Common 10 (north) */ +#define B2062_N_COMM11 B43_LP_NORTH(0x00B) /* Common 11 (north) */ +#define B2062_N_COMM12 B43_LP_NORTH(0x00C) /* Common 12 (north) */ +#define B2062_N_COMM13 B43_LP_NORTH(0x00D) /* Common 13 (north) */ +#define B2062_N_COMM14 B43_LP_NORTH(0x00E) /* Common 14 (north) */ +#define B2062_N_COMM15 B43_LP_NORTH(0x00F) /* Common 15 (north) */ +#define B2062_N_PDN_CTL0 B43_LP_NORTH(0x010) /* PDN Control 0 (north) */ +#define B2062_N_PDN_CTL1 B43_LP_NORTH(0x011) /* PDN Control 1 (north) */ +#define B2062_N_PDN_CTL2 B43_LP_NORTH(0x012) /* PDN Control 2 (north) */ +#define B2062_N_PDN_CTL3 B43_LP_NORTH(0x013) /* PDN Control 3 (north) */ +#define B2062_N_PDN_CTL4 B43_LP_NORTH(0x014) /* PDN Control 4 (north) */ +#define B2062_N_GEN_CTL0 B43_LP_NORTH(0x015) /* GEN Control 0 (north) */ +#define B2062_N_IQ_CALIB B43_LP_NORTH(0x016) /* IQ Calibration (north) */ +#define B2062_N_LGENC B43_LP_NORTH(0x017) /* LGENC (north) */ +#define B2062_N_LGENA_LPF B43_LP_NORTH(0x018) /* LGENA LPF (north) */ +#define B2062_N_LGENA_BIAS0 B43_LP_NORTH(0x019) /* LGENA Bias 0 (north) */ +#define B2062_N_LGNEA_BIAS1 B43_LP_NORTH(0x01A) /* LGNEA Bias 1 (north) */ +#define B2062_N_LGENA_CTL0 B43_LP_NORTH(0x01B) /* LGENA Control 0 (north) */ +#define B2062_N_LGENA_CTL1 B43_LP_NORTH(0x01C) /* LGENA Control 1 (north) */ +#define B2062_N_LGENA_CTL2 B43_LP_NORTH(0x01D) /* LGENA Control 2 (north) */ +#define B2062_N_LGENA_TUNE0 B43_LP_NORTH(0x01E) /* LGENA Tune 0 (north) */ +#define B2062_N_LGENA_TUNE1 B43_LP_NORTH(0x01F) /* LGENA Tune 1 (north) */ +#define B2062_N_LGENA_TUNE2 B43_LP_NORTH(0x020) /* LGENA Tune 2 (north) */ +#define B2062_N_LGENA_TUNE3 B43_LP_NORTH(0x021) /* LGENA Tune 3 (north) */ +#define B2062_N_LGENA_CTL3 B43_LP_NORTH(0x022) /* LGENA Control 3 (north) */ +#define B2062_N_LGENA_CTL4 B43_LP_NORTH(0x023) /* LGENA Control 4 (north) */ +#define B2062_N_LGENA_CTL5 B43_LP_NORTH(0x024) /* LGENA Control 5 (north) */ +#define B2062_N_LGENA_CTL6 B43_LP_NORTH(0x025) /* LGENA Control 6 (north) */ +#define B2062_N_LGENA_CTL7 B43_LP_NORTH(0x026) /* LGENA Control 7 (north) */ +#define B2062_N_RXA_CTL0 B43_LP_NORTH(0x027) /* RXA Control 0 (north) */ +#define B2062_N_RXA_CTL1 B43_LP_NORTH(0x028) /* RXA Control 1 (north) */ +#define B2062_N_RXA_CTL2 B43_LP_NORTH(0x029) /* RXA Control 2 (north) */ +#define B2062_N_RXA_CTL3 B43_LP_NORTH(0x02A) /* RXA Control 3 (north) */ +#define B2062_N_RXA_CTL4 B43_LP_NORTH(0x02B) /* RXA Control 4 (north) */ +#define B2062_N_RXA_CTL5 B43_LP_NORTH(0x02C) /* RXA Control 5 (north) */ +#define B2062_N_RXA_CTL6 B43_LP_NORTH(0x02D) /* RXA Control 6 (north) */ +#define B2062_N_RXA_CTL7 B43_LP_NORTH(0x02E) /* RXA Control 7 (north) */ +#define B2062_N_RXBB_CTL0 B43_LP_NORTH(0x02F) /* RXBB Control 0 (north) */ +#define B2062_N_RXBB_CTL1 B43_LP_NORTH(0x030) /* RXBB Control 1 (north) */ +#define B2062_N_RXBB_CTL2 B43_LP_NORTH(0x031) /* RXBB Control 2 (north) */ +#define B2062_N_RXBB_GAIN0 B43_LP_NORTH(0x032) /* RXBB Gain 0 (north) */ +#define B2062_N_RXBB_GAIN1 B43_LP_NORTH(0x033) /* RXBB Gain 1 (north) */ +#define B2062_N_RXBB_GAIN2 B43_LP_NORTH(0x034) /* RXBB Gain 2 (north) */ +#define B2062_N_RXBB_GAIN3 B43_LP_NORTH(0x035) /* RXBB Gain 3 (north) */ +#define B2062_N_RXBB_RSSI0 B43_LP_NORTH(0x036) /* RXBB RSSI 0 (north) */ +#define B2062_N_RXBB_RSSI1 B43_LP_NORTH(0x037) /* RXBB RSSI 1 (north) */ +#define B2062_N_RXBB_CALIB0 B43_LP_NORTH(0x038) /* RXBB Calibration0 (north) */ +#define B2062_N_RXBB_CALIB1 B43_LP_NORTH(0x039) /* RXBB Calibration1 (north) */ +#define B2062_N_RXBB_CALIB2 B43_LP_NORTH(0x03A) /* RXBB Calibration2 (north) */ +#define B2062_N_RXBB_BIAS0 B43_LP_NORTH(0x03B) /* RXBB Bias 0 (north) */ +#define B2062_N_RXBB_BIAS1 B43_LP_NORTH(0x03C) /* RXBB Bias 1 (north) */ +#define B2062_N_RXBB_BIAS2 B43_LP_NORTH(0x03D) /* RXBB Bias 2 (north) */ +#define B2062_N_RXBB_BIAS3 B43_LP_NORTH(0x03E) /* RXBB Bias 3 (north) */ +#define B2062_N_RXBB_BIAS4 B43_LP_NORTH(0x03F) /* RXBB Bias 4 (north) */ +#define B2062_N_RXBB_BIAS5 B43_LP_NORTH(0x040) /* RXBB Bias 5 (north) */ +#define B2062_N_RXBB_RSSI2 B43_LP_NORTH(0x041) /* RXBB RSSI 2 (north) */ +#define B2062_N_RXBB_RSSI3 B43_LP_NORTH(0x042) /* RXBB RSSI 3 (north) */ +#define B2062_N_RXBB_RSSI4 B43_LP_NORTH(0x043) /* RXBB RSSI 4 (north) */ +#define B2062_N_RXBB_RSSI5 B43_LP_NORTH(0x044) /* RXBB RSSI 5 (north) */ +#define B2062_N_TX_CTL0 B43_LP_NORTH(0x045) /* TX Control 0 (north) */ +#define B2062_N_TX_CTL1 B43_LP_NORTH(0x046) /* TX Control 1 (north) */ +#define B2062_N_TX_CTL2 B43_LP_NORTH(0x047) /* TX Control 2 (north) */ +#define B2062_N_TX_CTL3 B43_LP_NORTH(0x048) /* TX Control 3 (north) */ +#define B2062_N_TX_CTL4 B43_LP_NORTH(0x049) /* TX Control 4 (north) */ +#define B2062_N_TX_CTL5 B43_LP_NORTH(0x04A) /* TX Control 5 (north) */ +#define B2062_N_TX_CTL6 B43_LP_NORTH(0x04B) /* TX Control 6 (north) */ +#define B2062_N_TX_CTL7 B43_LP_NORTH(0x04C) /* TX Control 7 (north) */ +#define B2062_N_TX_CTL8 B43_LP_NORTH(0x04D) /* TX Control 8 (north) */ +#define B2062_N_TX_CTL9 B43_LP_NORTH(0x04E) /* TX Control 9 (north) */ +#define B2062_N_TX_CTL_A B43_LP_NORTH(0x04F) /* TX Control A (north) */ +#define B2062_N_TX_GC2G B43_LP_NORTH(0x050) /* TX GC2G (north) */ +#define B2062_N_TX_GC5G B43_LP_NORTH(0x051) /* TX GC5G (north) */ +#define B2062_N_TX_TUNE B43_LP_NORTH(0x052) /* TX Tune (north) */ +#define B2062_N_TX_PAD B43_LP_NORTH(0x053) /* TX PAD (north) */ +#define B2062_N_TX_PGA B43_LP_NORTH(0x054) /* TX PGA (north) */ +#define B2062_N_TX_PADAUX B43_LP_NORTH(0x055) /* TX PADAUX (north) */ +#define B2062_N_TX_PGAAUX B43_LP_NORTH(0x056) /* TX PGAAUX (north) */ +#define B2062_N_TSSI_CTL0 B43_LP_NORTH(0x057) /* TSSI Control 0 (north) */ +#define B2062_N_TSSI_CTL1 B43_LP_NORTH(0x058) /* TSSI Control 1 (north) */ +#define B2062_N_TSSI_CTL2 B43_LP_NORTH(0x059) /* TSSI Control 2 (north) */ +#define B2062_N_IQ_CALIB_CTL0 B43_LP_NORTH(0x05A) /* IQ Calibration Control 0 (north) */ +#define B2062_N_IQ_CALIB_CTL1 B43_LP_NORTH(0x05B) /* IQ Calibration Control 1 (north) */ +#define B2062_N_IQ_CALIB_CTL2 B43_LP_NORTH(0x05C) /* IQ Calibration Control 2 (north) */ +#define B2062_N_CALIB_TS B43_LP_NORTH(0x05D) /* Calibration TS (north) */ +#define B2062_N_CALIB_CTL0 B43_LP_NORTH(0x05E) /* Calibration Control 0 (north) */ +#define B2062_N_CALIB_CTL1 B43_LP_NORTH(0x05F) /* Calibration Control 1 (north) */ +#define B2062_N_CALIB_CTL2 B43_LP_NORTH(0x060) /* Calibration Control 2 (north) */ +#define B2062_N_CALIB_CTL3 B43_LP_NORTH(0x061) /* Calibration Control 3 (north) */ +#define B2062_N_CALIB_CTL4 B43_LP_NORTH(0x062) /* Calibration Control 4 (north) */ +#define B2062_N_CALIB_DBG0 B43_LP_NORTH(0x063) /* Calibration Debug 0 (north) */ +#define B2062_N_CALIB_DBG1 B43_LP_NORTH(0x064) /* Calibration Debug 1 (north) */ +#define B2062_N_CALIB_DBG2 B43_LP_NORTH(0x065) /* Calibration Debug 2 (north) */ +#define B2062_N_CALIB_DBG3 B43_LP_NORTH(0x066) /* Calibration Debug 3 (north) */ +#define B2062_N_PSENSE_CTL0 B43_LP_NORTH(0x069) /* PSENSE Control 0 (north) */ +#define B2062_N_PSENSE_CTL1 B43_LP_NORTH(0x06A) /* PSENSE Control 1 (north) */ +#define B2062_N_PSENSE_CTL2 B43_LP_NORTH(0x06B) /* PSENSE Control 2 (north) */ +#define B2062_N_TEST_BUF0 B43_LP_NORTH(0x06C) /* TEST BUF0 (north) */ + +/*** Broadcom 2062 SOUTH radio registers ***/ +#define B2062_S_COMM1 B43_LP_SOUTH(0x000) /* Common 01 (south) */ +#define B2062_S_RADIO_ID_CODE B43_LP_SOUTH(0x001) /* Radio ID code (south) */ +#define B2062_S_COMM2 B43_LP_SOUTH(0x002) /* Common 02 (south) */ +#define B2062_S_COMM3 B43_LP_SOUTH(0x003) /* Common 03 (south) */ +#define B2062_S_COMM4 B43_LP_SOUTH(0x004) /* Common 04 (south) */ +#define B2062_S_COMM5 B43_LP_SOUTH(0x005) /* Common 05 (south) */ +#define B2062_S_COMM6 B43_LP_SOUTH(0x006) /* Common 06 (south) */ +#define B2062_S_COMM7 B43_LP_SOUTH(0x007) /* Common 07 (south) */ +#define B2062_S_COMM8 B43_LP_SOUTH(0x008) /* Common 08 (south) */ +#define B2062_S_COMM9 B43_LP_SOUTH(0x009) /* Common 09 (south) */ +#define B2062_S_COMM10 B43_LP_SOUTH(0x00A) /* Common 10 (south) */ +#define B2062_S_COMM11 B43_LP_SOUTH(0x00B) /* Common 11 (south) */ +#define B2062_S_COMM12 B43_LP_SOUTH(0x00C) /* Common 12 (south) */ +#define B2062_S_COMM13 B43_LP_SOUTH(0x00D) /* Common 13 (south) */ +#define B2062_S_COMM14 B43_LP_SOUTH(0x00E) /* Common 14 (south) */ +#define B2062_S_COMM15 B43_LP_SOUTH(0x00F) /* Common 15 (south) */ +#define B2062_S_PDS_CTL0 B43_LP_SOUTH(0x010) /* PDS Control 0 (south) */ +#define B2062_S_PDS_CTL1 B43_LP_SOUTH(0x011) /* PDS Control 1 (south) */ +#define B2062_S_PDS_CTL2 B43_LP_SOUTH(0x012) /* PDS Control 2 (south) */ +#define B2062_S_PDS_CTL3 B43_LP_SOUTH(0x013) /* PDS Control 3 (south) */ +#define B2062_S_BG_CTL0 B43_LP_SOUTH(0x014) /* BG Control 0 (south) */ +#define B2062_S_BG_CTL1 B43_LP_SOUTH(0x015) /* BG Control 1 (south) */ +#define B2062_S_BG_CTL2 B43_LP_SOUTH(0x016) /* BG Control 2 (south) */ +#define B2062_S_LGENG_CTL0 B43_LP_SOUTH(0x017) /* LGENG Control 00 (south) */ +#define B2062_S_LGENG_CTL1 B43_LP_SOUTH(0x018) /* LGENG Control 01 (south) */ +#define B2062_S_LGENG_CTL2 B43_LP_SOUTH(0x019) /* LGENG Control 02 (south) */ +#define B2062_S_LGENG_CTL3 B43_LP_SOUTH(0x01A) /* LGENG Control 03 (south) */ +#define B2062_S_LGENG_CTL4 B43_LP_SOUTH(0x01B) /* LGENG Control 04 (south) */ +#define B2062_S_LGENG_CTL5 B43_LP_SOUTH(0x01C) /* LGENG Control 05 (south) */ +#define B2062_S_LGENG_CTL6 B43_LP_SOUTH(0x01D) /* LGENG Control 06 (south) */ +#define B2062_S_LGENG_CTL7 B43_LP_SOUTH(0x01E) /* LGENG Control 07 (south) */ +#define B2062_S_LGENG_CTL8 B43_LP_SOUTH(0x01F) /* LGENG Control 08 (south) */ +#define B2062_S_LGENG_CTL9 B43_LP_SOUTH(0x020) /* LGENG Control 09 (south) */ +#define B2062_S_LGENG_CTL10 B43_LP_SOUTH(0x021) /* LGENG Control 10 (south) */ +#define B2062_S_LGENG_CTL11 B43_LP_SOUTH(0x022) /* LGENG Control 11 (south) */ +#define B2062_S_REFPLL_CTL0 B43_LP_SOUTH(0x023) /* REFPLL Control 00 (south) */ +#define B2062_S_REFPLL_CTL1 B43_LP_SOUTH(0x024) /* REFPLL Control 01 (south) */ +#define B2062_S_REFPLL_CTL2 B43_LP_SOUTH(0x025) /* REFPLL Control 02 (south) */ +#define B2062_S_REFPLL_CTL3 B43_LP_SOUTH(0x026) /* REFPLL Control 03 (south) */ +#define B2062_S_REFPLL_CTL4 B43_LP_SOUTH(0x027) /* REFPLL Control 04 (south) */ +#define B2062_S_REFPLL_CTL5 B43_LP_SOUTH(0x028) /* REFPLL Control 05 (south) */ +#define B2062_S_REFPLL_CTL6 B43_LP_SOUTH(0x029) /* REFPLL Control 06 (south) */ +#define B2062_S_REFPLL_CTL7 B43_LP_SOUTH(0x02A) /* REFPLL Control 07 (south) */ +#define B2062_S_REFPLL_CTL8 B43_LP_SOUTH(0x02B) /* REFPLL Control 08 (south) */ +#define B2062_S_REFPLL_CTL9 B43_LP_SOUTH(0x02C) /* REFPLL Control 09 (south) */ +#define B2062_S_REFPLL_CTL10 B43_LP_SOUTH(0x02D) /* REFPLL Control 10 (south) */ +#define B2062_S_REFPLL_CTL11 B43_LP_SOUTH(0x02E) /* REFPLL Control 11 (south) */ +#define B2062_S_REFPLL_CTL12 B43_LP_SOUTH(0x02F) /* REFPLL Control 12 (south) */ +#define B2062_S_REFPLL_CTL13 B43_LP_SOUTH(0x030) /* REFPLL Control 13 (south) */ +#define B2062_S_REFPLL_CTL14 B43_LP_SOUTH(0x031) /* REFPLL Control 14 (south) */ +#define B2062_S_REFPLL_CTL15 B43_LP_SOUTH(0x032) /* REFPLL Control 15 (south) */ +#define B2062_S_REFPLL_CTL16 B43_LP_SOUTH(0x033) /* REFPLL Control 16 (south) */ +#define B2062_S_RFPLL_CTL0 B43_LP_SOUTH(0x034) /* RFPLL Control 00 (south) */ +#define B2062_S_RFPLL_CTL1 B43_LP_SOUTH(0x035) /* RFPLL Control 01 (south) */ +#define B2062_S_RFPLL_CTL2 B43_LP_SOUTH(0x036) /* RFPLL Control 02 (south) */ +#define B2062_S_RFPLL_CTL3 B43_LP_SOUTH(0x037) /* RFPLL Control 03 (south) */ +#define B2062_S_RFPLL_CTL4 B43_LP_SOUTH(0x038) /* RFPLL Control 04 (south) */ +#define B2062_S_RFPLL_CTL5 B43_LP_SOUTH(0x039) /* RFPLL Control 05 (south) */ +#define B2062_S_RFPLL_CTL6 B43_LP_SOUTH(0x03A) /* RFPLL Control 06 (south) */ +#define B2062_S_RFPLL_CTL7 B43_LP_SOUTH(0x03B) /* RFPLL Control 07 (south) */ +#define B2062_S_RFPLL_CTL8 B43_LP_SOUTH(0x03C) /* RFPLL Control 08 (south) */ +#define B2062_S_RFPLL_CTL9 B43_LP_SOUTH(0x03D) /* RFPLL Control 09 (south) */ +#define B2062_S_RFPLL_CTL10 B43_LP_SOUTH(0x03E) /* RFPLL Control 10 (south) */ +#define B2062_S_RFPLL_CTL11 B43_LP_SOUTH(0x03F) /* RFPLL Control 11 (south) */ +#define B2062_S_RFPLL_CTL12 B43_LP_SOUTH(0x040) /* RFPLL Control 12 (south) */ +#define B2062_S_RFPLL_CTL13 B43_LP_SOUTH(0x041) /* RFPLL Control 13 (south) */ +#define B2062_S_RFPLL_CTL14 B43_LP_SOUTH(0x042) /* RFPLL Control 14 (south) */ +#define B2062_S_RFPLL_CTL15 B43_LP_SOUTH(0x043) /* RFPLL Control 15 (south) */ +#define B2062_S_RFPLL_CTL16 B43_LP_SOUTH(0x044) /* RFPLL Control 16 (south) */ +#define B2062_S_RFPLL_CTL17 B43_LP_SOUTH(0x045) /* RFPLL Control 17 (south) */ +#define B2062_S_RFPLL_CTL18 B43_LP_SOUTH(0x046) /* RFPLL Control 18 (south) */ +#define B2062_S_RFPLL_CTL19 B43_LP_SOUTH(0x047) /* RFPLL Control 19 (south) */ +#define B2062_S_RFPLL_CTL20 B43_LP_SOUTH(0x048) /* RFPLL Control 20 (south) */ +#define B2062_S_RFPLL_CTL21 B43_LP_SOUTH(0x049) /* RFPLL Control 21 (south) */ +#define B2062_S_RFPLL_CTL22 B43_LP_SOUTH(0x04A) /* RFPLL Control 22 (south) */ +#define B2062_S_RFPLL_CTL23 B43_LP_SOUTH(0x04B) /* RFPLL Control 23 (south) */ +#define B2062_S_RFPLL_CTL24 B43_LP_SOUTH(0x04C) /* RFPLL Control 24 (south) */ +#define B2062_S_RFPLL_CTL25 B43_LP_SOUTH(0x04D) /* RFPLL Control 25 (south) */ +#define B2062_S_RFPLL_CTL26 B43_LP_SOUTH(0x04E) /* RFPLL Control 26 (south) */ +#define B2062_S_RFPLL_CTL27 B43_LP_SOUTH(0x04F) /* RFPLL Control 27 (south) */ +#define B2062_S_RFPLL_CTL28 B43_LP_SOUTH(0x050) /* RFPLL Control 28 (south) */ +#define B2062_S_RFPLL_CTL29 B43_LP_SOUTH(0x051) /* RFPLL Control 29 (south) */ +#define B2062_S_RFPLL_CTL30 B43_LP_SOUTH(0x052) /* RFPLL Control 30 (south) */ +#define B2062_S_RFPLL_CTL31 B43_LP_SOUTH(0x053) /* RFPLL Control 31 (south) */ +#define B2062_S_RFPLL_CTL32 B43_LP_SOUTH(0x054) /* RFPLL Control 32 (south) */ +#define B2062_S_RFPLL_CTL33 B43_LP_SOUTH(0x055) /* RFPLL Control 33 (south) */ +#define B2062_S_RFPLL_CTL34 B43_LP_SOUTH(0x056) /* RFPLL Control 34 (south) */ +#define B2062_S_RXG_CNT0 B43_LP_SOUTH(0x057) /* RXG Counter 00 (south) */ +#define B2062_S_RXG_CNT1 B43_LP_SOUTH(0x058) /* RXG Counter 01 (south) */ +#define B2062_S_RXG_CNT2 B43_LP_SOUTH(0x059) /* RXG Counter 02 (south) */ +#define B2062_S_RXG_CNT3 B43_LP_SOUTH(0x05A) /* RXG Counter 03 (south) */ +#define B2062_S_RXG_CNT4 B43_LP_SOUTH(0x05B) /* RXG Counter 04 (south) */ +#define B2062_S_RXG_CNT5 B43_LP_SOUTH(0x05C) /* RXG Counter 05 (south) */ +#define B2062_S_RXG_CNT6 B43_LP_SOUTH(0x05D) /* RXG Counter 06 (south) */ +#define B2062_S_RXG_CNT7 B43_LP_SOUTH(0x05E) /* RXG Counter 07 (south) */ +#define B2062_S_RXG_CNT8 B43_LP_SOUTH(0x05F) /* RXG Counter 08 (south) */ +#define B2062_S_RXG_CNT9 B43_LP_SOUTH(0x060) /* RXG Counter 09 (south) */ +#define B2062_S_RXG_CNT10 B43_LP_SOUTH(0x061) /* RXG Counter 10 (south) */ +#define B2062_S_RXG_CNT11 B43_LP_SOUTH(0x062) /* RXG Counter 11 (south) */ +#define B2062_S_RXG_CNT12 B43_LP_SOUTH(0x063) /* RXG Counter 12 (south) */ +#define B2062_S_RXG_CNT13 B43_LP_SOUTH(0x064) /* RXG Counter 13 (south) */ +#define B2062_S_RXG_CNT14 B43_LP_SOUTH(0x065) /* RXG Counter 14 (south) */ +#define B2062_S_RXG_CNT15 B43_LP_SOUTH(0x066) /* RXG Counter 15 (south) */ +#define B2062_S_RXG_CNT16 B43_LP_SOUTH(0x067) /* RXG Counter 16 (south) */ +#define B2062_S_RXG_CNT17 B43_LP_SOUTH(0x068) /* RXG Counter 17 (south) */ + + + +/*** Broadcom 2063 radio registers ***/ +#define B2063_RADIO_ID_CODE B43_LP_RADIO(0x001) /* Radio ID code */ +#define B2063_COMM1 B43_LP_RADIO(0x000) /* Common 01 */ +#define B2063_COMM2 B43_LP_RADIO(0x002) /* Common 02 */ +#define B2063_COMM3 B43_LP_RADIO(0x003) /* Common 03 */ +#define B2063_COMM4 B43_LP_RADIO(0x004) /* Common 04 */ +#define B2063_COMM5 B43_LP_RADIO(0x005) /* Common 05 */ +#define B2063_COMM6 B43_LP_RADIO(0x006) /* Common 06 */ +#define B2063_COMM7 B43_LP_RADIO(0x007) /* Common 07 */ +#define B2063_COMM8 B43_LP_RADIO(0x008) /* Common 08 */ +#define B2063_COMM9 B43_LP_RADIO(0x009) /* Common 09 */ +#define B2063_COMM10 B43_LP_RADIO(0x00A) /* Common 10 */ +#define B2063_COMM11 B43_LP_RADIO(0x00B) /* Common 11 */ +#define B2063_COMM12 B43_LP_RADIO(0x00C) /* Common 12 */ +#define B2063_COMM13 B43_LP_RADIO(0x00D) /* Common 13 */ +#define B2063_COMM14 B43_LP_RADIO(0x00E) /* Common 14 */ +#define B2063_COMM15 B43_LP_RADIO(0x00F) /* Common 15 */ +#define B2063_COMM16 B43_LP_RADIO(0x010) /* Common 16 */ +#define B2063_COMM17 B43_LP_RADIO(0x011) /* Common 17 */ +#define B2063_COMM18 B43_LP_RADIO(0x012) /* Common 18 */ +#define B2063_COMM19 B43_LP_RADIO(0x013) /* Common 19 */ +#define B2063_COMM20 B43_LP_RADIO(0x014) /* Common 20 */ +#define B2063_COMM21 B43_LP_RADIO(0x015) /* Common 21 */ +#define B2063_COMM22 B43_LP_RADIO(0x016) /* Common 22 */ +#define B2063_COMM23 B43_LP_RADIO(0x017) /* Common 23 */ +#define B2063_COMM24 B43_LP_RADIO(0x018) /* Common 24 */ +#define B2063_PWR_SWITCH_CTL B43_LP_RADIO(0x019) /* POWER SWITCH Control */ +#define B2063_PLL_SP1 B43_LP_RADIO(0x01A) /* PLL SP 1 */ +#define B2063_PLL_SP2 B43_LP_RADIO(0x01B) /* PLL SP 2 */ +#define B2063_LOGEN_SP1 B43_LP_RADIO(0x01C) /* LOGEN SP 1 */ +#define B2063_LOGEN_SP2 B43_LP_RADIO(0x01D) /* LOGEN SP 2 */ +#define B2063_LOGEN_SP3 B43_LP_RADIO(0x01E) /* LOGEN SP 3 */ +#define B2063_LOGEN_SP4 B43_LP_RADIO(0x01F) /* LOGEN SP 4 */ +#define B2063_LOGEN_SP5 B43_LP_RADIO(0x020) /* LOGEN SP 5 */ +#define B2063_G_RX_SP1 B43_LP_RADIO(0x021) /* G RX SP 1 */ +#define B2063_G_RX_SP2 B43_LP_RADIO(0x022) /* G RX SP 2 */ +#define B2063_G_RX_SP3 B43_LP_RADIO(0x023) /* G RX SP 3 */ +#define B2063_G_RX_SP4 B43_LP_RADIO(0x024) /* G RX SP 4 */ +#define B2063_G_RX_SP5 B43_LP_RADIO(0x025) /* G RX SP 5 */ +#define B2063_G_RX_SP6 B43_LP_RADIO(0x026) /* G RX SP 6 */ +#define B2063_G_RX_SP7 B43_LP_RADIO(0x027) /* G RX SP 7 */ +#define B2063_G_RX_SP8 B43_LP_RADIO(0x028) /* G RX SP 8 */ +#define B2063_G_RX_SP9 B43_LP_RADIO(0x029) /* G RX SP 9 */ +#define B2063_G_RX_SP10 B43_LP_RADIO(0x02A) /* G RX SP 10 */ +#define B2063_G_RX_SP11 B43_LP_RADIO(0x02B) /* G RX SP 11 */ +#define B2063_A_RX_SP1 B43_LP_RADIO(0x02C) /* A RX SP 1 */ +#define B2063_A_RX_SP2 B43_LP_RADIO(0x02D) /* A RX SP 2 */ +#define B2063_A_RX_SP3 B43_LP_RADIO(0x02E) /* A RX SP 3 */ +#define B2063_A_RX_SP4 B43_LP_RADIO(0x02F) /* A RX SP 4 */ +#define B2063_A_RX_SP5 B43_LP_RADIO(0x030) /* A RX SP 5 */ +#define B2063_A_RX_SP6 B43_LP_RADIO(0x031) /* A RX SP 6 */ +#define B2063_A_RX_SP7 B43_LP_RADIO(0x032) /* A RX SP 7 */ +#define B2063_RX_BB_SP1 B43_LP_RADIO(0x033) /* RX BB SP 1 */ +#define B2063_RX_BB_SP2 B43_LP_RADIO(0x034) /* RX BB SP 2 */ +#define B2063_RX_BB_SP3 B43_LP_RADIO(0x035) /* RX BB SP 3 */ +#define B2063_RX_BB_SP4 B43_LP_RADIO(0x036) /* RX BB SP 4 */ +#define B2063_RX_BB_SP5 B43_LP_RADIO(0x037) /* RX BB SP 5 */ +#define B2063_RX_BB_SP6 B43_LP_RADIO(0x038) /* RX BB SP 6 */ +#define B2063_RX_BB_SP7 B43_LP_RADIO(0x039) /* RX BB SP 7 */ +#define B2063_RX_BB_SP8 B43_LP_RADIO(0x03A) /* RX BB SP 8 */ +#define B2063_TX_RF_SP1 B43_LP_RADIO(0x03B) /* TX RF SP 1 */ +#define B2063_TX_RF_SP2 B43_LP_RADIO(0x03C) /* TX RF SP 2 */ +#define B2063_TX_RF_SP3 B43_LP_RADIO(0x03D) /* TX RF SP 3 */ +#define B2063_TX_RF_SP4 B43_LP_RADIO(0x03E) /* TX RF SP 4 */ +#define B2063_TX_RF_SP5 B43_LP_RADIO(0x03F) /* TX RF SP 5 */ +#define B2063_TX_RF_SP6 B43_LP_RADIO(0x040) /* TX RF SP 6 */ +#define B2063_TX_RF_SP7 B43_LP_RADIO(0x041) /* TX RF SP 7 */ +#define B2063_TX_RF_SP8 B43_LP_RADIO(0x042) /* TX RF SP 8 */ +#define B2063_TX_RF_SP9 B43_LP_RADIO(0x043) /* TX RF SP 9 */ +#define B2063_TX_RF_SP10 B43_LP_RADIO(0x044) /* TX RF SP 10 */ +#define B2063_TX_RF_SP11 B43_LP_RADIO(0x045) /* TX RF SP 11 */ +#define B2063_TX_RF_SP12 B43_LP_RADIO(0x046) /* TX RF SP 12 */ +#define B2063_TX_RF_SP13 B43_LP_RADIO(0x047) /* TX RF SP 13 */ +#define B2063_TX_RF_SP14 B43_LP_RADIO(0x048) /* TX RF SP 14 */ +#define B2063_TX_RF_SP15 B43_LP_RADIO(0x049) /* TX RF SP 15 */ +#define B2063_TX_RF_SP16 B43_LP_RADIO(0x04A) /* TX RF SP 16 */ +#define B2063_TX_RF_SP17 B43_LP_RADIO(0x04B) /* TX RF SP 17 */ +#define B2063_PA_SP1 B43_LP_RADIO(0x04C) /* PA SP 1 */ +#define B2063_PA_SP2 B43_LP_RADIO(0x04D) /* PA SP 2 */ +#define B2063_PA_SP3 B43_LP_RADIO(0x04E) /* PA SP 3 */ +#define B2063_PA_SP4 B43_LP_RADIO(0x04F) /* PA SP 4 */ +#define B2063_PA_SP5 B43_LP_RADIO(0x050) /* PA SP 5 */ +#define B2063_PA_SP6 B43_LP_RADIO(0x051) /* PA SP 6 */ +#define B2063_PA_SP7 B43_LP_RADIO(0x052) /* PA SP 7 */ +#define B2063_TX_BB_SP1 B43_LP_RADIO(0x053) /* TX BB SP 1 */ +#define B2063_TX_BB_SP2 B43_LP_RADIO(0x054) /* TX BB SP 2 */ +#define B2063_TX_BB_SP3 B43_LP_RADIO(0x055) /* TX BB SP 3 */ +#define B2063_REG_SP1 B43_LP_RADIO(0x056) /* REG SP 1 */ +#define B2063_BANDGAP_CTL1 B43_LP_RADIO(0x057) /* BANDGAP Control 1 */ +#define B2063_BANDGAP_CTL2 B43_LP_RADIO(0x058) /* BANDGAP Control 2 */ +#define B2063_LPO_CTL1 B43_LP_RADIO(0x059) /* LPO Control 1 */ +#define B2063_RC_CALIB_CTL1 B43_LP_RADIO(0x05A) /* RC Calibration Control 1 */ +#define B2063_RC_CALIB_CTL2 B43_LP_RADIO(0x05B) /* RC Calibration Control 2 */ +#define B2063_RC_CALIB_CTL3 B43_LP_RADIO(0x05C) /* RC Calibration Control 3 */ +#define B2063_RC_CALIB_CTL4 B43_LP_RADIO(0x05D) /* RC Calibration Control 4 */ +#define B2063_RC_CALIB_CTL5 B43_LP_RADIO(0x05E) /* RC Calibration Control 5 */ +#define B2063_RC_CALIB_CTL6 B43_LP_RADIO(0x05F) /* RC Calibration Control 6 */ +#define B2063_RC_CALIB_CTL7 B43_LP_RADIO(0x060) /* RC Calibration Control 7 */ +#define B2063_RC_CALIB_CTL8 B43_LP_RADIO(0x061) /* RC Calibration Control 8 */ +#define B2063_RC_CALIB_CTL9 B43_LP_RADIO(0x062) /* RC Calibration Control 9 */ +#define B2063_RC_CALIB_CTL10 B43_LP_RADIO(0x063) /* RC Calibration Control 10 */ +#define B2063_PLL_JTAG_CALNRST B43_LP_RADIO(0x064) /* PLL JTAG CALNRST */ +#define B2063_PLL_JTAG_IN_PLL1 B43_LP_RADIO(0x065) /* PLL JTAG IN PLL 1 */ +#define B2063_PLL_JTAG_IN_PLL2 B43_LP_RADIO(0x066) /* PLL JTAG IN PLL 2 */ +#define B2063_PLL_JTAG_PLL_CP1 B43_LP_RADIO(0x067) /* PLL JTAG PLL CP 1 */ +#define B2063_PLL_JTAG_PLL_CP2 B43_LP_RADIO(0x068) /* PLL JTAG PLL CP 2 */ +#define B2063_PLL_JTAG_PLL_CP3 B43_LP_RADIO(0x069) /* PLL JTAG PLL CP 3 */ +#define B2063_PLL_JTAG_PLL_CP4 B43_LP_RADIO(0x06A) /* PLL JTAG PLL CP 4 */ +#define B2063_PLL_JTAG_PLL_CTL1 B43_LP_RADIO(0x06B) /* PLL JTAG PLL Control 1 */ +#define B2063_PLL_JTAG_PLL_LF1 B43_LP_RADIO(0x06C) /* PLL JTAG PLL LF 1 */ +#define B2063_PLL_JTAG_PLL_LF2 B43_LP_RADIO(0x06D) /* PLL JTAG PLL LF 2 */ +#define B2063_PLL_JTAG_PLL_LF3 B43_LP_RADIO(0x06E) /* PLL JTAG PLL LF 3 */ +#define B2063_PLL_JTAG_PLL_LF4 B43_LP_RADIO(0x06F) /* PLL JTAG PLL LF 4 */ +#define B2063_PLL_JTAG_PLL_SG1 B43_LP_RADIO(0x070) /* PLL JTAG PLL SG 1 */ +#define B2063_PLL_JTAG_PLL_SG2 B43_LP_RADIO(0x071) /* PLL JTAG PLL SG 2 */ +#define B2063_PLL_JTAG_PLL_SG3 B43_LP_RADIO(0x072) /* PLL JTAG PLL SG 3 */ +#define B2063_PLL_JTAG_PLL_SG4 B43_LP_RADIO(0x073) /* PLL JTAG PLL SG 4 */ +#define B2063_PLL_JTAG_PLL_SG5 B43_LP_RADIO(0x074) /* PLL JTAG PLL SG 5 */ +#define B2063_PLL_JTAG_PLL_VCO1 B43_LP_RADIO(0x075) /* PLL JTAG PLL VCO 1 */ +#define B2063_PLL_JTAG_PLL_VCO2 B43_LP_RADIO(0x076) /* PLL JTAG PLL VCO 2 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB1 B43_LP_RADIO(0x077) /* PLL JTAG PLL VCO Calibration 1 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB2 B43_LP_RADIO(0x078) /* PLL JTAG PLL VCO Calibration 2 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB3 B43_LP_RADIO(0x079) /* PLL JTAG PLL VCO Calibration 3 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB4 B43_LP_RADIO(0x07A) /* PLL JTAG PLL VCO Calibration 4 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB5 B43_LP_RADIO(0x07B) /* PLL JTAG PLL VCO Calibration 5 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB6 B43_LP_RADIO(0x07C) /* PLL JTAG PLL VCO Calibration 6 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB7 B43_LP_RADIO(0x07D) /* PLL JTAG PLL VCO Calibration 7 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB8 B43_LP_RADIO(0x07E) /* PLL JTAG PLL VCO Calibration 8 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB9 B43_LP_RADIO(0x07F) /* PLL JTAG PLL VCO Calibration 9 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB10 B43_LP_RADIO(0x080) /* PLL JTAG PLL VCO Calibration 10 */ +#define B2063_PLL_JTAG_PLL_XTAL_12 B43_LP_RADIO(0x081) /* PLL JTAG PLL XTAL 1 2 */ +#define B2063_PLL_JTAG_PLL_XTAL3 B43_LP_RADIO(0x082) /* PLL JTAG PLL XTAL 3 */ +#define B2063_LOGEN_ACL1 B43_LP_RADIO(0x083) /* LOGEN ACL 1 */ +#define B2063_LOGEN_ACL2 B43_LP_RADIO(0x084) /* LOGEN ACL 2 */ +#define B2063_LOGEN_ACL3 B43_LP_RADIO(0x085) /* LOGEN ACL 3 */ +#define B2063_LOGEN_ACL4 B43_LP_RADIO(0x086) /* LOGEN ACL 4 */ +#define B2063_LOGEN_ACL5 B43_LP_RADIO(0x087) /* LOGEN ACL 5 */ +#define B2063_LO_CALIB_INPUTS B43_LP_RADIO(0x088) /* LO Calibration INPUTS */ +#define B2063_LO_CALIB_CTL1 B43_LP_RADIO(0x089) /* LO Calibration Control 1 */ +#define B2063_LO_CALIB_CTL2 B43_LP_RADIO(0x08A) /* LO Calibration Control 2 */ +#define B2063_LO_CALIB_CTL3 B43_LP_RADIO(0x08B) /* LO Calibration Control 3 */ +#define B2063_LO_CALIB_WAITCNT B43_LP_RADIO(0x08C) /* LO Calibration WAITCNT */ +#define B2063_LO_CALIB_OVR1 B43_LP_RADIO(0x08D) /* LO Calibration OVR 1 */ +#define B2063_LO_CALIB_OVR2 B43_LP_RADIO(0x08E) /* LO Calibration OVR 2 */ +#define B2063_LO_CALIB_OVAL1 B43_LP_RADIO(0x08F) /* LO Calibration OVAL 1 */ +#define B2063_LO_CALIB_OVAL2 B43_LP_RADIO(0x090) /* LO Calibration OVAL 2 */ +#define B2063_LO_CALIB_OVAL3 B43_LP_RADIO(0x091) /* LO Calibration OVAL 3 */ +#define B2063_LO_CALIB_OVAL4 B43_LP_RADIO(0x092) /* LO Calibration OVAL 4 */ +#define B2063_LO_CALIB_OVAL5 B43_LP_RADIO(0x093) /* LO Calibration OVAL 5 */ +#define B2063_LO_CALIB_OVAL6 B43_LP_RADIO(0x094) /* LO Calibration OVAL 6 */ +#define B2063_LO_CALIB_OVAL7 B43_LP_RADIO(0x095) /* LO Calibration OVAL 7 */ +#define B2063_LO_CALIB_CALVLD1 B43_LP_RADIO(0x096) /* LO Calibration CALVLD 1 */ +#define B2063_LO_CALIB_CALVLD2 B43_LP_RADIO(0x097) /* LO Calibration CALVLD 2 */ +#define B2063_LO_CALIB_CVAL1 B43_LP_RADIO(0x098) /* LO Calibration CVAL 1 */ +#define B2063_LO_CALIB_CVAL2 B43_LP_RADIO(0x099) /* LO Calibration CVAL 2 */ +#define B2063_LO_CALIB_CVAL3 B43_LP_RADIO(0x09A) /* LO Calibration CVAL 3 */ +#define B2063_LO_CALIB_CVAL4 B43_LP_RADIO(0x09B) /* LO Calibration CVAL 4 */ +#define B2063_LO_CALIB_CVAL5 B43_LP_RADIO(0x09C) /* LO Calibration CVAL 5 */ +#define B2063_LO_CALIB_CVAL6 B43_LP_RADIO(0x09D) /* LO Calibration CVAL 6 */ +#define B2063_LO_CALIB_CVAL7 B43_LP_RADIO(0x09E) /* LO Calibration CVAL 7 */ +#define B2063_LOGEN_CALIB_EN B43_LP_RADIO(0x09F) /* LOGEN Calibration EN */ +#define B2063_LOGEN_PEAKDET1 B43_LP_RADIO(0x0A0) /* LOGEN PEAKDET 1 */ +#define B2063_LOGEN_RCCR1 B43_LP_RADIO(0x0A1) /* LOGEN RCCR 1 */ +#define B2063_LOGEN_VCOBUF1 B43_LP_RADIO(0x0A2) /* LOGEN VCOBUF 1 */ +#define B2063_LOGEN_MIXER1 B43_LP_RADIO(0x0A3) /* LOGEN MIXER 1 */ +#define B2063_LOGEN_MIXER2 B43_LP_RADIO(0x0A4) /* LOGEN MIXER 2 */ +#define B2063_LOGEN_BUF1 B43_LP_RADIO(0x0A5) /* LOGEN BUF 1 */ +#define B2063_LOGEN_BUF2 B43_LP_RADIO(0x0A6) /* LOGEN BUF 2 */ +#define B2063_LOGEN_DIV1 B43_LP_RADIO(0x0A7) /* LOGEN DIV 1 */ +#define B2063_LOGEN_DIV2 B43_LP_RADIO(0x0A8) /* LOGEN DIV 2 */ +#define B2063_LOGEN_DIV3 B43_LP_RADIO(0x0A9) /* LOGEN DIV 3 */ +#define B2063_LOGEN_CBUFRX1 B43_LP_RADIO(0x0AA) /* LOGEN CBUFRX 1 */ +#define B2063_LOGEN_CBUFRX2 B43_LP_RADIO(0x0AB) /* LOGEN CBUFRX 2 */ +#define B2063_LOGEN_CBUFTX1 B43_LP_RADIO(0x0AC) /* LOGEN CBUFTX 1 */ +#define B2063_LOGEN_CBUFTX2 B43_LP_RADIO(0x0AD) /* LOGEN CBUFTX 2 */ +#define B2063_LOGEN_IDAC1 B43_LP_RADIO(0x0AE) /* LOGEN IDAC 1 */ +#define B2063_LOGEN_SPARE1 B43_LP_RADIO(0x0AF) /* LOGEN SPARE 1 */ +#define B2063_LOGEN_SPARE2 B43_LP_RADIO(0x0B0) /* LOGEN SPARE 2 */ +#define B2063_LOGEN_SPARE3 B43_LP_RADIO(0x0B1) /* LOGEN SPARE 3 */ +#define B2063_G_RX_1ST1 B43_LP_RADIO(0x0B2) /* G RX 1ST 1 */ +#define B2063_G_RX_1ST2 B43_LP_RADIO(0x0B3) /* G RX 1ST 2 */ +#define B2063_G_RX_1ST3 B43_LP_RADIO(0x0B4) /* G RX 1ST 3 */ +#define B2063_G_RX_2ND1 B43_LP_RADIO(0x0B5) /* G RX 2ND 1 */ +#define B2063_G_RX_2ND2 B43_LP_RADIO(0x0B6) /* G RX 2ND 2 */ +#define B2063_G_RX_2ND3 B43_LP_RADIO(0x0B7) /* G RX 2ND 3 */ +#define B2063_G_RX_2ND4 B43_LP_RADIO(0x0B8) /* G RX 2ND 4 */ +#define B2063_G_RX_2ND5 B43_LP_RADIO(0x0B9) /* G RX 2ND 5 */ +#define B2063_G_RX_2ND6 B43_LP_RADIO(0x0BA) /* G RX 2ND 6 */ +#define B2063_G_RX_2ND7 B43_LP_RADIO(0x0BB) /* G RX 2ND 7 */ +#define B2063_G_RX_2ND8 B43_LP_RADIO(0x0BC) /* G RX 2ND 8 */ +#define B2063_G_RX_PS1 B43_LP_RADIO(0x0BD) /* G RX PS 1 */ +#define B2063_G_RX_PS2 B43_LP_RADIO(0x0BE) /* G RX PS 2 */ +#define B2063_G_RX_PS3 B43_LP_RADIO(0x0BF) /* G RX PS 3 */ +#define B2063_G_RX_PS4 B43_LP_RADIO(0x0C0) /* G RX PS 4 */ +#define B2063_G_RX_PS5 B43_LP_RADIO(0x0C1) /* G RX PS 5 */ +#define B2063_G_RX_MIX1 B43_LP_RADIO(0x0C2) /* G RX MIX 1 */ +#define B2063_G_RX_MIX2 B43_LP_RADIO(0x0C3) /* G RX MIX 2 */ +#define B2063_G_RX_MIX3 B43_LP_RADIO(0x0C4) /* G RX MIX 3 */ +#define B2063_G_RX_MIX4 B43_LP_RADIO(0x0C5) /* G RX MIX 4 */ +#define B2063_G_RX_MIX5 B43_LP_RADIO(0x0C6) /* G RX MIX 5 */ +#define B2063_G_RX_MIX6 B43_LP_RADIO(0x0C7) /* G RX MIX 6 */ +#define B2063_G_RX_MIX7 B43_LP_RADIO(0x0C8) /* G RX MIX 7 */ +#define B2063_G_RX_MIX8 B43_LP_RADIO(0x0C9) /* G RX MIX 8 */ +#define B2063_G_RX_PDET1 B43_LP_RADIO(0x0CA) /* G RX PDET 1 */ +#define B2063_G_RX_SPARES1 B43_LP_RADIO(0x0CB) /* G RX SPARES 1 */ +#define B2063_G_RX_SPARES2 B43_LP_RADIO(0x0CC) /* G RX SPARES 2 */ +#define B2063_G_RX_SPARES3 B43_LP_RADIO(0x0CD) /* G RX SPARES 3 */ +#define B2063_A_RX_1ST1 B43_LP_RADIO(0x0CE) /* A RX 1ST 1 */ +#define B2063_A_RX_1ST2 B43_LP_RADIO(0x0CF) /* A RX 1ST 2 */ +#define B2063_A_RX_1ST3 B43_LP_RADIO(0x0D0) /* A RX 1ST 3 */ +#define B2063_A_RX_1ST4 B43_LP_RADIO(0x0D1) /* A RX 1ST 4 */ +#define B2063_A_RX_1ST5 B43_LP_RADIO(0x0D2) /* A RX 1ST 5 */ +#define B2063_A_RX_2ND1 B43_LP_RADIO(0x0D3) /* A RX 2ND 1 */ +#define B2063_A_RX_2ND2 B43_LP_RADIO(0x0D4) /* A RX 2ND 2 */ +#define B2063_A_RX_2ND3 B43_LP_RADIO(0x0D5) /* A RX 2ND 3 */ +#define B2063_A_RX_2ND4 B43_LP_RADIO(0x0D6) /* A RX 2ND 4 */ +#define B2063_A_RX_2ND5 B43_LP_RADIO(0x0D7) /* A RX 2ND 5 */ +#define B2063_A_RX_2ND6 B43_LP_RADIO(0x0D8) /* A RX 2ND 6 */ +#define B2063_A_RX_2ND7 B43_LP_RADIO(0x0D9) /* A RX 2ND 7 */ +#define B2063_A_RX_PS1 B43_LP_RADIO(0x0DA) /* A RX PS 1 */ +#define B2063_A_RX_PS2 B43_LP_RADIO(0x0DB) /* A RX PS 2 */ +#define B2063_A_RX_PS3 B43_LP_RADIO(0x0DC) /* A RX PS 3 */ +#define B2063_A_RX_PS4 B43_LP_RADIO(0x0DD) /* A RX PS 4 */ +#define B2063_A_RX_PS5 B43_LP_RADIO(0x0DE) /* A RX PS 5 */ +#define B2063_A_RX_PS6 B43_LP_RADIO(0x0DF) /* A RX PS 6 */ +#define B2063_A_RX_MIX1 B43_LP_RADIO(0x0E0) /* A RX MIX 1 */ +#define B2063_A_RX_MIX2 B43_LP_RADIO(0x0E1) /* A RX MIX 2 */ +#define B2063_A_RX_MIX3 B43_LP_RADIO(0x0E2) /* A RX MIX 3 */ +#define B2063_A_RX_MIX4 B43_LP_RADIO(0x0E3) /* A RX MIX 4 */ +#define B2063_A_RX_MIX5 B43_LP_RADIO(0x0E4) /* A RX MIX 5 */ +#define B2063_A_RX_MIX6 B43_LP_RADIO(0x0E5) /* A RX MIX 6 */ +#define B2063_A_RX_MIX7 B43_LP_RADIO(0x0E6) /* A RX MIX 7 */ +#define B2063_A_RX_MIX8 B43_LP_RADIO(0x0E7) /* A RX MIX 8 */ +#define B2063_A_RX_PWRDET1 B43_LP_RADIO(0x0E8) /* A RX PWRDET 1 */ +#define B2063_A_RX_SPARE1 B43_LP_RADIO(0x0E9) /* A RX SPARE 1 */ +#define B2063_A_RX_SPARE2 B43_LP_RADIO(0x0EA) /* A RX SPARE 2 */ +#define B2063_A_RX_SPARE3 B43_LP_RADIO(0x0EB) /* A RX SPARE 3 */ +#define B2063_RX_TIA_CTL1 B43_LP_RADIO(0x0EC) /* RX TIA Control 1 */ +#define B2063_RX_TIA_CTL2 B43_LP_RADIO(0x0ED) /* RX TIA Control 2 */ +#define B2063_RX_TIA_CTL3 B43_LP_RADIO(0x0EE) /* RX TIA Control 3 */ +#define B2063_RX_TIA_CTL4 B43_LP_RADIO(0x0EF) /* RX TIA Control 4 */ +#define B2063_RX_TIA_CTL5 B43_LP_RADIO(0x0F0) /* RX TIA Control 5 */ +#define B2063_RX_TIA_CTL6 B43_LP_RADIO(0x0F1) /* RX TIA Control 6 */ +#define B2063_RX_BB_CTL1 B43_LP_RADIO(0x0F2) /* RX BB Control 1 */ +#define B2063_RX_BB_CTL2 B43_LP_RADIO(0x0F3) /* RX BB Control 2 */ +#define B2063_RX_BB_CTL3 B43_LP_RADIO(0x0F4) /* RX BB Control 3 */ +#define B2063_RX_BB_CTL4 B43_LP_RADIO(0x0F5) /* RX BB Control 4 */ +#define B2063_RX_BB_CTL5 B43_LP_RADIO(0x0F6) /* RX BB Control 5 */ +#define B2063_RX_BB_CTL6 B43_LP_RADIO(0x0F7) /* RX BB Control 6 */ +#define B2063_RX_BB_CTL7 B43_LP_RADIO(0x0F8) /* RX BB Control 7 */ +#define B2063_RX_BB_CTL8 B43_LP_RADIO(0x0F9) /* RX BB Control 8 */ +#define B2063_RX_BB_CTL9 B43_LP_RADIO(0x0FA) /* RX BB Control 9 */ +#define B2063_TX_RF_CTL1 B43_LP_RADIO(0x0FB) /* TX RF Control 1 */ +#define B2063_TX_RF_IDAC_LO_RF_I B43_LP_RADIO(0x0FC) /* TX RF IDAC LO RF I */ +#define B2063_TX_RF_IDAC_LO_RF_Q B43_LP_RADIO(0x0FD) /* TX RF IDAC LO RF Q */ +#define B2063_TX_RF_IDAC_LO_BB_I B43_LP_RADIO(0x0FE) /* TX RF IDAC LO BB I */ +#define B2063_TX_RF_IDAC_LO_BB_Q B43_LP_RADIO(0x0FF) /* TX RF IDAC LO BB Q */ +#define B2063_TX_RF_CTL2 B43_LP_RADIO(0x100) /* TX RF Control 2 */ +#define B2063_TX_RF_CTL3 B43_LP_RADIO(0x101) /* TX RF Control 3 */ +#define B2063_TX_RF_CTL4 B43_LP_RADIO(0x102) /* TX RF Control 4 */ +#define B2063_TX_RF_CTL5 B43_LP_RADIO(0x103) /* TX RF Control 5 */ +#define B2063_TX_RF_CTL6 B43_LP_RADIO(0x104) /* TX RF Control 6 */ +#define B2063_TX_RF_CTL7 B43_LP_RADIO(0x105) /* TX RF Control 7 */ +#define B2063_TX_RF_CTL8 B43_LP_RADIO(0x106) /* TX RF Control 8 */ +#define B2063_TX_RF_CTL9 B43_LP_RADIO(0x107) /* TX RF Control 9 */ +#define B2063_TX_RF_CTL10 B43_LP_RADIO(0x108) /* TX RF Control 10 */ +#define B2063_TX_RF_CTL14 B43_LP_RADIO(0x109) /* TX RF Control 14 */ +#define B2063_TX_RF_CTL15 B43_LP_RADIO(0x10A) /* TX RF Control 15 */ +#define B2063_PA_CTL1 B43_LP_RADIO(0x10B) /* PA Control 1 */ +#define B2063_PA_CTL2 B43_LP_RADIO(0x10C) /* PA Control 2 */ +#define B2063_PA_CTL3 B43_LP_RADIO(0x10D) /* PA Control 3 */ +#define B2063_PA_CTL4 B43_LP_RADIO(0x10E) /* PA Control 4 */ +#define B2063_PA_CTL5 B43_LP_RADIO(0x10F) /* PA Control 5 */ +#define B2063_PA_CTL6 B43_LP_RADIO(0x110) /* PA Control 6 */ +#define B2063_PA_CTL7 B43_LP_RADIO(0x111) /* PA Control 7 */ +#define B2063_PA_CTL8 B43_LP_RADIO(0x112) /* PA Control 8 */ +#define B2063_PA_CTL9 B43_LP_RADIO(0x113) /* PA Control 9 */ +#define B2063_PA_CTL10 B43_LP_RADIO(0x114) /* PA Control 10 */ +#define B2063_PA_CTL11 B43_LP_RADIO(0x115) /* PA Control 11 */ +#define B2063_PA_CTL12 B43_LP_RADIO(0x116) /* PA Control 12 */ +#define B2063_PA_CTL13 B43_LP_RADIO(0x117) /* PA Control 13 */ +#define B2063_TX_BB_CTL1 B43_LP_RADIO(0x118) /* TX BB Control 1 */ +#define B2063_TX_BB_CTL2 B43_LP_RADIO(0x119) /* TX BB Control 2 */ +#define B2063_TX_BB_CTL3 B43_LP_RADIO(0x11A) /* TX BB Control 3 */ +#define B2063_TX_BB_CTL4 B43_LP_RADIO(0x11B) /* TX BB Control 4 */ +#define B2063_GPIO_CTL1 B43_LP_RADIO(0x11C) /* GPIO Control 1 */ +#define B2063_VREG_CTL1 B43_LP_RADIO(0x11D) /* VREG Control 1 */ +#define B2063_AMUX_CTL1 B43_LP_RADIO(0x11E) /* AMUX Control 1 */ +#define B2063_IQ_CALIB_GVAR B43_LP_RADIO(0x11F) /* IQ Calibration GVAR */ +#define B2063_IQ_CALIB_CTL1 B43_LP_RADIO(0x120) /* IQ Calibration Control 1 */ +#define B2063_IQ_CALIB_CTL2 B43_LP_RADIO(0x121) /* IQ Calibration Control 2 */ +#define B2063_TEMPSENSE_CTL1 B43_LP_RADIO(0x122) /* TEMPSENSE Control 1 */ +#define B2063_TEMPSENSE_CTL2 B43_LP_RADIO(0x123) /* TEMPSENSE Control 2 */ +#define B2063_TX_RX_LOOPBACK1 B43_LP_RADIO(0x124) /* TX/RX LOOPBACK 1 */ +#define B2063_TX_RX_LOOPBACK2 B43_LP_RADIO(0x125) /* TX/RX LOOPBACK 2 */ +#define B2063_EXT_TSSI_CTL1 B43_LP_RADIO(0x126) /* EXT TSSI Control 1 */ +#define B2063_EXT_TSSI_CTL2 B43_LP_RADIO(0x127) /* EXT TSSI Control 2 */ +#define B2063_AFE_CTL B43_LP_RADIO(0x128) /* AFE Control */ + + + +struct b43_phy_lp { + //TODO +}; + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_lp; + +#endif /* LINUX_B43_PHY_LP_H_ */ diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/phy_n.c index 644eed993be..8bcfda5f3f0 100644 --- a/drivers/net/wireless/b43/nphy.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -26,7 +26,7 @@ #include <linux/types.h> #include "b43.h" -#include "nphy.h" +#include "phy_n.h" #include "tables_nphy.h" @@ -34,10 +34,16 @@ void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) {//TODO } -void b43_nphy_xmitpower(struct b43_wldev *dev) +static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev) {//TODO } +static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + static void b43_chantab_radio_upload(struct b43_wldev *dev, const struct b43_nphy_channeltab_entry *e) { @@ -81,9 +87,8 @@ static void b43_nphy_tx_power_fix(struct b43_wldev *dev) //TODO } -/* Tune the hardware to a new channel. Don't call this directly. - * Use b43_radio_selectchannel() */ -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel) +/* Tune the hardware to a new channel. */ +static int nphy_channel_switch(struct b43_wldev *dev, unsigned int channel) { const struct b43_nphy_channeltab_entry *tabent; @@ -162,7 +167,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev) msleep(1); b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F); msleep(1); - b43_radio_selectchannel(dev, dev->phy.channel, 0); + nphy_channel_switch(dev, dev->phy.channel); b43_radio_write16(dev, B2055_C1_RX_BB_LPF, 0x9); b43_radio_write16(dev, B2055_C2_RX_BB_LPF, 0x9); b43_radio_write16(dev, B2055_C1_RX_BB_MIDACHP, 0x83); @@ -484,3 +489,140 @@ int b43_phy_initn(struct b43_wldev *dev) b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n"); return 0; } + +static int b43_nphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_n *nphy; + + nphy = kzalloc(sizeof(*nphy), GFP_KERNEL); + if (!nphy) + return -ENOMEM; + dev->phy.n = nphy; + + return 0; +} + +static void b43_nphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + + memset(nphy, 0, sizeof(*nphy)); + + //TODO init struct b43_phy_n +} + +static void b43_nphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + + kfree(nphy); + phy->n = NULL; +} + +static int b43_nphy_op_init(struct b43_wldev *dev) +{ + return b43_phy_initn(dev); +} + +static inline void check_phyreg(struct b43_wldev *dev, u16 offset) +{ +#if B43_DEBUG + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { + /* OFDM registers are onnly available on A/G-PHYs */ + b43err(dev->wl, "Invalid OFDM PHY access at " + "0x%04X on N-PHY\n", offset); + dump_stack(); + } + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { + /* Ext-G registers are only available on G-PHYs */ + b43err(dev->wl, "Invalid EXT-G PHY access at " + "0x%04X on N-PHY\n", offset); + dump_stack(); + } +#endif /* B43_DEBUG */ +} + +static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg) +{ + check_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + check_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* N-PHY needs 0x100 for read access */ + reg |= 0x100; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static void b43_nphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{//TODO +} + +static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on) +{ + b43_phy_write(dev, B43_NPHY_AFECTL_OVER, + on ? 0 : 0x7FFF); +} + +static int b43_nphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + if ((new_channel < 1) || (new_channel > 14)) + return -EINVAL; + } else { + if (new_channel > 200) + return -EINVAL; + } + + return nphy_channel_switch(dev, new_channel); +} + +static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev) +{ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + return 1; + return 36; +} + +const struct b43_phy_operations b43_phyops_n = { + .allocate = b43_nphy_op_allocate, + .free = b43_nphy_op_free, + .prepare_structs = b43_nphy_op_prepare_structs, + .init = b43_nphy_op_init, + .phy_read = b43_nphy_op_read, + .phy_write = b43_nphy_op_write, + .radio_read = b43_nphy_op_radio_read, + .radio_write = b43_nphy_op_radio_write, + .software_rfkill = b43_nphy_op_software_rfkill, + .switch_analog = b43_nphy_op_switch_analog, + .switch_channel = b43_nphy_op_switch_channel, + .get_default_chan = b43_nphy_op_get_default_chan, + .recalc_txpower = b43_nphy_op_recalc_txpower, + .adjust_txpower = b43_nphy_op_adjust_txpower, +}; diff --git a/drivers/net/wireless/b43/nphy.h b/drivers/net/wireless/b43/phy_n.h index faf46b9cbf1..1749aef4147 100644 --- a/drivers/net/wireless/b43/nphy.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -1,7 +1,7 @@ #ifndef B43_NPHY_H_ #define B43_NPHY_H_ -#include "phy.h" +#include "phy_common.h" /* N-PHY registers. */ @@ -919,54 +919,12 @@ struct b43_wldev; +struct b43_phy_n { + //TODO lots of missing stuff +}; -#ifdef CONFIG_B43_NPHY -/* N-PHY support enabled */ -int b43_phy_initn(struct b43_wldev *dev); +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_n; -void b43_nphy_radio_turn_on(struct b43_wldev *dev); -void b43_nphy_radio_turn_off(struct b43_wldev *dev); - -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel); - -void b43_nphy_xmitpower(struct b43_wldev *dev); -void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna); - - -#else /* CONFIG_B43_NPHY */ -/* N-PHY support disabled */ - - -static inline -int b43_phy_initn(struct b43_wldev *dev) -{ - return -EOPNOTSUPP; -} - -static inline -void b43_nphy_radio_turn_on(struct b43_wldev *dev) -{ -} -static inline -void b43_nphy_radio_turn_off(struct b43_wldev *dev) -{ -} - -static inline -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel) -{ - return -ENOSYS; -} - -static inline -void b43_nphy_xmitpower(struct b43_wldev *dev) -{ -} -static inline -void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) -{ -} - -#endif /* CONFIG_B43_NPHY */ #endif /* B43_NPHY_H_ */ diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index fec5645944a..713753781f4 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -24,6 +24,7 @@ #include "rfkill.h" #include "b43.h" +#include "phy_common.h" #include <linux/kmod.h> @@ -43,23 +44,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43_rfkill_update_state(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -77,7 +61,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43_rfkill_update_state(dev); b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } @@ -114,11 +97,11 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; } if (!dev->phy.radio_on) - b43_radio_turn_on(dev); + b43_software_rfkill(dev, state); break; case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, state); break; default: b43warn(wl, "Received unexpected rfkill state %d.\n", state); @@ -187,6 +170,11 @@ void b43_rfkill_init(struct b43_wldev *dev) "The built-in radio LED will not work.\n"); #endif /* CONFIG_RFKILL_INPUT */ +#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE) + b43warn(wl, "The rfkill-input subsystem is not available. " + "The built-in radio LED will not work.\n"); +#endif + err = input_register_polled_device(rfk->poll_dev); if (err) goto err_unreg_rfk; diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c index 275095b8cbe..5adaa3692d7 100644 --- a/drivers/net/wireless/b43/sysfs.c +++ b/drivers/net/wireless/b43/sysfs.c @@ -29,7 +29,7 @@ #include "b43.h" #include "sysfs.h" #include "main.h" -#include "phy.h" +#include "phy_common.h" #define GENERIC_FILESIZE 64 @@ -59,7 +59,12 @@ static ssize_t b43_attr_interfmode_show(struct device *dev, mutex_lock(&wldev->wl->mutex); - switch (wldev->phy.interfmode) { + if (wldev->phy.type != B43_PHYTYPE_G) { + mutex_unlock(&wldev->wl->mutex); + return -ENOSYS; + } + + switch (wldev->phy.g->interfmode) { case B43_INTERFMODE_NONE: count = snprintf(buf, PAGE_SIZE, @@ -117,11 +122,15 @@ static ssize_t b43_attr_interfmode_store(struct device *dev, mutex_lock(&wldev->wl->mutex); spin_lock_irqsave(&wldev->wl->irq_lock, flags); - err = b43_radio_set_interference_mitigation(wldev, mode); - if (err) { - b43err(wldev->wl, "Interference Mitigation not " - "supported by device\n"); - } + if (wldev->phy.ops->interf_mitigation) { + err = wldev->phy.ops->interf_mitigation(wldev, mode); + if (err) { + b43err(wldev->wl, "Interference Mitigation not " + "supported by device\n"); + } + } else + err = -ENOSYS; + mmiowb(); spin_unlock_irqrestore(&wldev->wl->irq_lock, flags); mutex_unlock(&wldev->wl->mutex); diff --git a/drivers/net/wireless/b43/tables.c b/drivers/net/wireless/b43/tables.c index 3f5ea06bf13..1ef9a6463ec 100644 --- a/drivers/net/wireless/b43/tables.c +++ b/drivers/net/wireless/b43/tables.c @@ -27,7 +27,8 @@ #include "b43.h" #include "tables.h" -#include "phy.h" +#include "phy_g.h" + const u32 b43_tab_rotor[] = { 0xFEB93FFD, 0xFEC63FFD, /* 0 */ @@ -377,17 +378,17 @@ static inline void assert_sizes(void) u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; return b43_phy_read(dev, B43_PHY_OTABLEI); @@ -398,34 +399,34 @@ u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset) void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, u16 offset, u16 value) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; b43_phy_write(dev, B43_PHY_OTABLEI, value); } u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u32 ret; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; ret = b43_phy_read(dev, B43_PHY_OTABLEQ); ret <<= 16; ret |= b43_phy_read(dev, B43_PHY_OTABLEI); @@ -436,17 +437,17 @@ u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset) void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, u16 offset, u32 value) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; b43_phy_write(dev, B43_PHY_OTABLEI, value); b43_phy_write(dev, B43_PHY_OTABLEQ, (value >> 16)); diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c index 2aa57551786..4e233631554 100644 --- a/drivers/net/wireless/b43/tables_nphy.c +++ b/drivers/net/wireless/b43/tables_nphy.c @@ -24,8 +24,8 @@ #include "b43.h" #include "tables_nphy.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_n.h" struct b2055_inittab_entry { diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c index daa94211f83..0c0fb15abb9 100644 --- a/drivers/net/wireless/b43/wa.c +++ b/drivers/net/wireless/b43/wa.c @@ -27,7 +27,7 @@ #include "b43.h" #include "main.h" #include "tables.h" -#include "phy.h" +#include "phy_common.h" #include "wa.h" static void b43_wa_papd(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 9dda8169f7c..2fabcf8f047 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -28,7 +28,7 @@ */ #include "xmit.h" -#include "phy.h" +#include "phy_common.h" #include "dma.h" #include "pio.h" @@ -208,7 +208,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, txrate = ieee80211_get_tx_rate(dev->wl->hw, info); rate = txrate ? txrate->hw_value : B43_CCK_RATE_1MB; rate_ofdm = b43_is_ofdm_rate(rate); - fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : txrate; + fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : txrate; rate_fb = fbrate->hw_value; rate_fb_ofdm = b43_is_ofdm_rate(rate_fb); @@ -252,7 +252,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, } /* Hardware appends ICV. */ - plcp_fragment_len += info->control.icv_len; + plcp_fragment_len += info->control.hw_key->icv_len; key_idx = b43_kidx_to_fw(dev, key_idx); mac_ctl |= (key_idx << B43_TXH_MAC_KEYIDX_SHIFT) & @@ -260,7 +260,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) & B43_TXH_MAC_KEYALG; wlhdr_len = ieee80211_hdrlen(fctl); - iv_len = min((size_t) info->control.iv_len, + iv_len = min((size_t) info->control.hw_key->iv_len, ARRAY_SIZE(txhdr->iv)); memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len); } @@ -431,6 +431,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, int adjust_2053, int adjust_2050) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; s32 tmp; switch (phy->radio_ver) { @@ -450,7 +451,8 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, boardflags_lo & B43_BFL_RSSI) { if (in_rssi > 63) in_rssi = 63; - tmp = phy->nrssi_lt[in_rssi]; + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + tmp = gphy->nrssi_lt[in_rssi]; tmp = 31 - tmp; tmp *= -131; tmp /= 128; @@ -678,6 +680,8 @@ void b43_handle_txstatus(struct b43_wldev *dev, b43_pio_handle_txstatus(dev, status); else b43_dma_handle_txstatus(dev, status); + + b43_phy_txpower_check(dev, 0); } /* Fill out the mac80211 TXstatus report based on the b43-specific diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 1cb77db5c29..c66d57560e7 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -888,13 +888,13 @@ generate_new: static void handle_irq_tbtt_indication(struct b43legacy_wldev *dev) { - if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) { + if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) { /* TODO: PS TBTT */ } else { if (1/*FIXME: the last PSpoll frame was sent successfully */) b43legacy_power_saving_ctl_bits(dev, -1, -1); } - if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) + if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) dev->dfq_valid = 1; } @@ -1201,7 +1201,7 @@ static void handle_irq_beacon(struct b43legacy_wldev *dev) struct b43legacy_wl *wl = dev->wl; u32 cmd; - if (!b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP)) + if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) return; /* This is the bottom half of the asynchronous beacon update. */ @@ -1936,9 +1936,9 @@ static void b43legacy_adjust_opmode(struct b43legacy_wldev *dev) ctl &= ~B43legacy_MACCTL_BEACPROMISC; ctl |= B43legacy_MACCTL_INFRA; - if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP)) + if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) ctl |= B43legacy_MACCTL_AP; - else if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) + else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) ctl &= ~B43legacy_MACCTL_INFRA; if (wl->filter_flags & FIF_CONTROL) @@ -2646,7 +2646,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, b43legacy_mgmtframe_txantenna(dev, antenna_tx); /* Update templates for AP mode. */ - if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP)) + if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) b43legacy_set_beacon_int(dev, conf->beacon_int); @@ -2733,12 +2733,12 @@ static int b43legacy_op_config_interface(struct ieee80211_hw *hw, else memset(wl->bssid, 0, ETH_ALEN); if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) { - if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP)) { - B43legacy_WARN_ON(vif->type != IEEE80211_IF_TYPE_AP); + if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) { + B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP); b43legacy_set_ssid(dev, conf->ssid, conf->ssid_len); if (conf->changed & IEEE80211_IFCC_BEACON) b43legacy_update_templates(wl); - } else if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) { + } else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) { if (conf->changed & IEEE80211_IFCC_BEACON) b43legacy_update_templates(wl); } @@ -3020,7 +3020,7 @@ static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev, bool idle) { u16 pu_delay = 1050; - if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle) + if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) pu_delay = 500; if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) pu_delay = max(pu_delay, (u16)2400); @@ -3035,7 +3035,7 @@ static void b43legacy_set_pretbtt(struct b43legacy_wldev *dev) u16 pretbtt; /* The time value is in microseconds. */ - if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) + if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) pretbtt = 2; else pretbtt = 250; @@ -3259,10 +3259,10 @@ static int b43legacy_op_add_interface(struct ieee80211_hw *hw, /* TODO: allow WDS/AP devices to coexist */ - if (conf->type != IEEE80211_IF_TYPE_AP && - conf->type != IEEE80211_IF_TYPE_STA && - conf->type != IEEE80211_IF_TYPE_WDS && - conf->type != IEEE80211_IF_TYPE_IBSS) + if (conf->type != NL80211_IFTYPE_AP && + conf->type != NL80211_IFTYPE_STATION && + conf->type != NL80211_IFTYPE_WDS && + conf->type != NL80211_IFTYPE_ADHOC) return -EOPNOTSUPP; mutex_lock(&wl->mutex); @@ -3403,7 +3403,7 @@ out_unlock: } static int b43legacy_op_beacon_set_tim(struct ieee80211_hw *hw, - int aid, int set) + struct ieee80211_sta *sta, bool set) { struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); unsigned long flags; @@ -3704,7 +3704,13 @@ static int b43legacy_wireless_init(struct ssb_device *dev) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); hw->queues = 1; /* FIXME: hardware has more queues */ + hw->max_altrates = 1; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c index 768cccb9b1b..4c9442b16f3 100644 --- a/drivers/net/wireless/b43legacy/phy.c +++ b/drivers/net/wireless/b43legacy/phy.c @@ -103,7 +103,7 @@ void b43legacy_phy_lock(struct b43legacy_wldev *dev) if (dev->dev->id.revision < 3) { b43legacy_mac_suspend(dev); } else { - if (!b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) + if (!b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43legacy_power_saving_ctl_bits(dev, -1, 1); } } @@ -118,7 +118,7 @@ void b43legacy_phy_unlock(struct b43legacy_wldev *dev) if (dev->dev->id.revision < 3) { b43legacy_mac_enable(dev); } else { - if (!b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) + if (!b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43legacy_power_saving_ctl_bits(dev, -1, -1); } } @@ -595,12 +595,14 @@ static void b43legacy_phy_initb5(struct b43legacy_wldev *dev) 0x0035) & 0xFFC0) | 0x0064); b43legacy_phy_write(dev, 0x005D, (b43legacy_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); + b43legacy_phy_write(dev, 0x5B, 0x0000); + b43legacy_phy_write(dev, 0x5C, 0x0000); } if (dev->bad_frames_preempt) b43legacy_phy_write(dev, B43legacy_PHY_RADIO_BITFIELD, b43legacy_phy_read(dev, - B43legacy_PHY_RADIO_BITFIELD) | (1 << 11)); + B43legacy_PHY_RADIO_BITFIELD) | (1 << 12)); if (phy->analog == 1) { b43legacy_phy_write(dev, 0x0026, 0xCE00); @@ -753,7 +755,7 @@ static void b43legacy_phy_initb6(struct b43legacy_wldev *dev) b43legacy_radio_write16(dev, 0x0050, 0x0020); } if (phy->radio_rev <= 2) { - b43legacy_radio_write16(dev, 0x007C, 0x0020); + b43legacy_radio_write16(dev, 0x0050, 0x0020); b43legacy_radio_write16(dev, 0x005A, 0x0070); b43legacy_radio_write16(dev, 0x005B, 0x007B); b43legacy_radio_write16(dev, 0x005C, 0x00B0); @@ -771,7 +773,7 @@ static void b43legacy_phy_initb6(struct b43legacy_wldev *dev) b43legacy_phy_write(dev, 0x002A, 0x8AC0); b43legacy_phy_write(dev, 0x0038, 0x0668); b43legacy_radio_set_txpower_bg(dev, 0xFFFF, 0xFFFF, 0xFFFF); - if (phy->radio_rev <= 5) + if (phy->radio_rev == 4 || phy->radio_rev == 5) b43legacy_phy_write(dev, 0x005D, (b43legacy_phy_read(dev, 0x005D) & 0xFF80) | 0x0003); if (phy->radio_rev <= 2) @@ -1010,7 +1012,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) b43legacy_phy_initb5(dev); else b43legacy_phy_initb6(dev); - if (phy->rev >= 2 || phy->gmode) + if (phy->rev >= 2 && phy->gmode) b43legacy_phy_inita(dev); if (phy->rev >= 2) { @@ -1025,18 +1027,22 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) b43legacy_phy_write(dev, 0x0811, 0x0400); b43legacy_phy_write(dev, 0x0015, 0x00C0); } - if (phy->rev >= 2 || phy->gmode) { + if (phy->gmode) { tmp = b43legacy_phy_read(dev, 0x0400) & 0xFF; - if (tmp == 3 || tmp == 5) { + if (tmp == 3) { + b43legacy_phy_write(dev, 0x04C2, 0x1816); + b43legacy_phy_write(dev, 0x04C3, 0x8606); + } + if (tmp == 4 || tmp == 5) { b43legacy_phy_write(dev, 0x04C2, 0x1816); b43legacy_phy_write(dev, 0x04C3, 0x8006); - if (tmp == 5) - b43legacy_phy_write(dev, 0x04CC, - (b43legacy_phy_read(dev, - 0x04CC) & 0x00FF) | - 0x1F00); + b43legacy_phy_write(dev, 0x04CC, + (b43legacy_phy_read(dev, + 0x04CC) & 0x00FF) | + 0x1F00); } - b43legacy_phy_write(dev, 0x047E, 0x0078); + if (phy->rev >= 2) + b43legacy_phy_write(dev, 0x047E, 0x0078); } if (phy->radio_rev == 8) { b43legacy_phy_write(dev, 0x0801, b43legacy_phy_read(dev, 0x0801) @@ -1078,7 +1084,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) else b43legacy_phy_write(dev, 0x002F, 0x0202); } - if (phy->gmode || phy->rev >= 2) { + if (phy->gmode) { b43legacy_phy_lo_adjust(dev, 0); b43legacy_phy_write(dev, 0x080F, 0x8078); } diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c index 476add97e97..b32bf6a94f1 100644 --- a/drivers/net/wireless/b43legacy/rfkill.c +++ b/drivers/net/wireless/b43legacy/rfkill.c @@ -44,23 +44,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev) -{ - struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -78,7 +61,6 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43legacy_rfkill_update_state(dev); b43legacyinfo(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 68e1f8c7872..65e83378160 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -193,7 +193,6 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, { const struct ieee80211_hdr *wlhdr; int use_encryption = !!info->control.hw_key; - u16 fctl; u8 rate; struct ieee80211_rate *rate_fb; int rate_ofdm; @@ -204,7 +203,6 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, struct ieee80211_rate *tx_rate; wlhdr = (const struct ieee80211_hdr *)fragment_data; - fctl = le16_to_cpu(wlhdr->frame_control); memset(txhdr, 0, sizeof(*txhdr)); @@ -212,7 +210,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, rate = tx_rate->hw_value; rate_ofdm = b43legacy_is_ofdm_rate(rate); - rate_fb = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : tx_rate; + rate_fb = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : tx_rate; rate_fb_ofdm = b43legacy_is_ofdm_rate(rate_fb->hw_value); txhdr->mac_frame_ctl = wlhdr->frame_control; @@ -245,7 +243,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, if (key->enabled) { /* Hardware appends ICV. */ - plcp_fragment_len += info->control.icv_len; + plcp_fragment_len += info->control.hw_key->icv_len; key_idx = b43legacy_kidx_to_fw(dev, key_idx); mac_ctl |= (key_idx << B43legacy_TX4_MAC_KEYIDX_SHIFT) & @@ -253,8 +251,8 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, mac_ctl |= (key->algorithm << B43legacy_TX4_MAC_KEYALG_SHIFT) & B43legacy_TX4_MAC_KEYALG; - wlhdr_len = ieee80211_get_hdrlen(fctl); - iv_len = min((size_t)info->control.iv_len, + wlhdr_len = ieee80211_hdrlen(wlhdr->frame_control); + iv_len = min((size_t)info->control.hw_key->iv_len, ARRAY_SIZE(txhdr->iv)); memcpy(txhdr->iv, ((u8 *)wlhdr) + wlhdr_len, iv_len); } else { @@ -626,7 +624,7 @@ void b43legacy_handle_hwtxstatus(struct b43legacy_wldev *dev, tmp = hw->count; status.frame_count = (tmp >> 4); status.rts_count = (tmp & 0x0F); - tmp = hw->flags; + tmp = hw->flags << 1; status.supp_reason = ((tmp & 0x1C) >> 2); status.pm_indicated = !!(tmp & 0x80); status.intermediate = !!(tmp & 0x40); diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index 29d39105f5b..bfa375369df 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -87,7 +87,8 @@ MODULE_LICENSE("Dual MPL/GPL"); Callable from any context. */ -static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) +static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, + u16 param1, u16 param2) { int k = CMD_BUSY_TIMEOUT; u16 reg; @@ -103,8 +104,8 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) return -EBUSY; } - hermes_write_regn(hw, PARAM2, 0); - hermes_write_regn(hw, PARAM1, 0); + hermes_write_regn(hw, PARAM2, param2); + hermes_write_regn(hw, PARAM1, param1); hermes_write_regn(hw, PARAM0, param0); hermes_write_regn(hw, CMD, cmd); @@ -115,16 +116,72 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) * Function definitions */ +/* For doing cmds that wipe the magic constant in SWSUPPORT0 */ +int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) +{ + int err = 0; + int k; + u16 status, reg; + + err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2); + if (err) + return err; + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_INIT_TIMEOUT; + while ((!(reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + + if (!hermes_present(hw)) { + DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", + hw->iobase); + err = -ENODEV; + goto out; + } + + if (!(reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for card to reset (reg=0x%04x)!\n", + hw->iobase, reg); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; +out: + return err; +} +EXPORT_SYMBOL(hermes_doicmd_wait); + void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) { hw->iobase = address; hw->reg_spacing = reg_spacing; hw->inten = 0x0; } +EXPORT_SYMBOL(hermes_struct_init); int hermes_init(hermes_t *hw) { - u16 status, reg; + u16 reg; int err = 0; int k; @@ -162,45 +219,11 @@ int hermes_init(hermes_t *hw) /* We don't use hermes_docmd_wait here, because the reset wipes the magic constant in SWSUPPORT0 away, and it gets confused */ - err = hermes_issue_cmd(hw, HERMES_CMD_INIT, 0); - if (err) - return err; - - reg = hermes_read_regn(hw, EVSTAT); - k = CMD_INIT_TIMEOUT; - while ( (! (reg & HERMES_EV_CMD)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); - - if (! hermes_present(hw)) { - DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", - hw->iobase); - err = -ENODEV; - goto out; - } - - if (! (reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for card to reset (reg=0x%04x)!\n", - hw->iobase, reg); - err = -ETIMEDOUT; - goto out; - } + err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL); - status = hermes_read_regn(hw, STATUS); - - hermes_write_regn(hw, EVACK, HERMES_EV_CMD); - - if (status & HERMES_STATUS_RESULT) - err = -EIO; - - out: return err; } +EXPORT_SYMBOL(hermes_init); /* Issue a command to the chip, and (busy!) wait for it to * complete. @@ -216,7 +239,7 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, u16 reg; u16 status; - err = hermes_issue_cmd(hw, cmd, parm0); + err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); if (err) { if (! hermes_present(hw)) { if (net_ratelimit()) @@ -271,6 +294,7 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, out: return err; } +EXPORT_SYMBOL(hermes_docmd_wait); int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) { @@ -313,7 +337,7 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) return 0; } - +EXPORT_SYMBOL(hermes_allocate); /* Set up a BAP to read a particular chunk of data from card's internal buffer. * @@ -397,6 +421,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, out: return err; } +EXPORT_SYMBOL(hermes_bap_pread); /* Write a block of data to the chip's buffer, via the * BAP. Synchronization/serialization is the caller's problem. @@ -422,6 +447,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, out: return err; } +EXPORT_SYMBOL(hermes_bap_pwrite); /* Read a Length-Type-Value record from the card. * @@ -463,7 +489,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, if (rtype != rid) printk(KERN_WARNING "hermes @ %p: %s(): " "rid (0x%04x) does not match type (0x%04x)\n", - hw->iobase, __FUNCTION__, rid, rtype); + hw->iobase, __func__, rid, rtype); if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) printk(KERN_WARNING "hermes @ %p: " "Truncating LTV record from %d to %d bytes. " @@ -475,6 +501,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, return 0; } +EXPORT_SYMBOL(hermes_read_ltv); int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, u16 length, const void *value) @@ -497,20 +524,11 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, hermes_write_bytes(hw, dreg, value, count << 1); - err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, rid, NULL); return err; } - -EXPORT_SYMBOL(hermes_struct_init); -EXPORT_SYMBOL(hermes_init); -EXPORT_SYMBOL(hermes_docmd_wait); -EXPORT_SYMBOL(hermes_allocate); - -EXPORT_SYMBOL(hermes_bap_pread); -EXPORT_SYMBOL(hermes_bap_pwrite); -EXPORT_SYMBOL(hermes_read_ltv); EXPORT_SYMBOL(hermes_write_ltv); static int __init init_hermes(void) diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index 8e3f0e3edb5..8b13c8fef3d 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -179,17 +179,23 @@ #define HERMES_802_11_OFFSET (14) #define HERMES_802_3_OFFSET (14+32) #define HERMES_802_2_OFFSET (14+32+14) +#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) #define HERMES_RXSTAT_ERR (0x0003) #define HERMES_RXSTAT_BADCRC (0x0001) #define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) +#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */ #define HERMES_RXSTAT_MACPORT (0x0700) #define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ +#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */ #define HERMES_RXSTAT_MSGTYPE (0xE000) #define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ #define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ #define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ +/* Shift amount for key ID in RXSTAT and TXCTRL */ +#define HERMES_MIC_KEY_ID_SHIFT 11 + struct hermes_tx_descriptor { __le16 status; __le16 reserved1; @@ -208,6 +214,8 @@ struct hermes_tx_descriptor { #define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ #define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ #define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ +#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */ +#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */ #define HERMES_TXCTRL_ALT_RTRY (0x0020) /* Inquiry constants and data types */ @@ -302,6 +310,40 @@ union hermes_scan_info { struct symbol_scan_apinfo s; }; +/* Extended scan struct for HERMES_INQ_CHANNELINFO. + * wl_lkm calls this an ACS scan (Automatic Channel Select). + * Keep out of union hermes_scan_info because it is much bigger than + * the older scan structures. */ +struct agere_ext_scan_info { + __le16 reserved0; + + u8 noise; + u8 level; + u8 rx_flow; + u8 rate; + __le16 reserved1[2]; + + __le16 frame_control; + __le16 dur_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + __le16 sequence; + u8 addr4[ETH_ALEN]; + + __le16 data_length; + + /* Next 3 fields do not get filled in. */ + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; + __le16 len_type; + + __le64 timestamp; + __le16 beacon_interval; + __le16 capabilities; + u8 data[316]; +} __attribute__ ((packed)); + #define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) #define HERMES_LINKSTATUS_CONNECTED (0x0001) #define HERMES_LINKSTATUS_DISCONNECTED (0x0002) @@ -353,6 +395,9 @@ void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); int hermes_init(hermes_t *hw); int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, struct hermes_response *resp); +int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp); int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, diff --git a/drivers/net/wireless/hermes_dld.c b/drivers/net/wireless/hermes_dld.c new file mode 100644 index 00000000000..d8c626e61a3 --- /dev/null +++ b/drivers/net/wireless/hermes_dld.c @@ -0,0 +1,730 @@ +/* + * Hermes download helper driver. + * + * This could be entirely merged into hermes.c. + * + * I'm keeping it separate to minimise the amount of merging between + * kernel upgrades. It also means the memory overhead for drivers that + * don't need firmware download low. + * + * This driver: + * - is capable of writing to the volatile area of the hermes device + * - is currently not capable of writing to non-volatile areas + * - provide helpers to identify and update plugin data + * - is not capable of interpreting a fw image directly. That is up to + * the main card driver. + * - deals with Hermes I devices. It can probably be modified to deal + * with Hermes II devices + * + * Copyright (C) 2007, David Kilroy + * + * Plug data code slightly modified from spectrum_cs driver + * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> + * Portions based on information in wl_lkm_718 Agere driver + * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include "hermes.h" +#include "hermes_dld.h" + +MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset"); +MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>"); +MODULE_LICENSE("Dual MPL/GPL"); + +#define PFX "hermes_dld: " + +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + +/* End markers used in dblocks */ +#define PDI_END 0x00000000 /* End of PDA */ +#define BLOCK_END 0xFFFFFFFF /* Last image block */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * PDA == Production Data Area + * + * In principle, the max. size of the PDA is is 4096 words. Currently, + * however, only about 500 bytes of this area are used. + * + * Some USB implementations can't handle sizes in excess of 1016. Note + * that PDA is not actually used in those USB environments, but may be + * retrieved by common code. + */ +#define MAX_PDA_SIZE 1000 + +/* Limit the amout we try to download in a single shot. + * Size is in bytes. + */ +#define MAX_DL_SIZE 1024 +#define LIMIT_PROGRAM_SIZE 0 + +/* + * The following structures have little-endian fields denoted by + * the leading underscore. Don't access them directly - use inline + * functions defined below. + */ + +/* + * The binary image to be downloaded consists of series of data blocks. + * Each block has the following structure. + */ +struct dblock { + __le32 addr; /* adapter address where to write the block */ + __le16 len; /* length of the data only, in bytes */ + char data[0]; /* data to be written */ +} __attribute__ ((packed)); + +/* + * Plug Data References are located in in the image after the last data + * block. They refer to areas in the adapter memory where the plug data + * items with matching ID should be written. + */ +struct pdr { + __le32 id; /* record ID */ + __le32 addr; /* adapter address where to write the data */ + __le32 len; /* expected length of the data, in bytes */ + char next[0]; /* next PDR starts here */ +} __attribute__ ((packed)); + +/* + * Plug Data Items are located in the EEPROM read from the adapter by + * primary firmware. They refer to the device-specific data that should + * be plugged into the secondary firmware. + */ +struct pdi { + __le16 len; /* length of ID and data, in words */ + __le16 id; /* record ID */ + char data[0]; /* plug data */ +} __attribute__ ((packed)); + +/*** FW data block access functions ***/ + +static inline u32 +dblock_addr(const struct dblock *blk) +{ + return le32_to_cpu(blk->addr); +} + +static inline u32 +dblock_len(const struct dblock *blk) +{ + return le16_to_cpu(blk->len); +} + +/*** PDR Access functions ***/ + +static inline u32 +pdr_id(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->id); +} + +static inline u32 +pdr_addr(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->addr); +} + +static inline u32 +pdr_len(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->len); +} + +/*** PDI Access functions ***/ + +static inline u32 +pdi_id(const struct pdi *pdi) +{ + return le16_to_cpu(pdi->id); +} + +/* Return length of the data only, in bytes */ +static inline u32 +pdi_len(const struct pdi *pdi) +{ + return 2 * (le16_to_cpu(pdi->len) - 1); +} + +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(hermes_t *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Plug Data Functions ***/ + +/* + * Scan PDR for the record with the specified RECORD_ID. + * If it's not found, return NULL. + */ +static struct pdr * +hermes_find_pdr(struct pdr *first_pdr, u32 record_id) +{ + struct pdr *pdr = first_pdr; + void *end = (void *)first_pdr + MAX_PDA_SIZE; + + while (((void *)pdr < end) && + (pdr_id(pdr) != PDI_END)) { + /* + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + return NULL; + + /* If the record ID matches, we are done */ + if (pdr_id(pdr) == record_id) + return pdr; + + pdr = (struct pdr *) pdr->next; + } + return NULL; +} + +/* Scan production data items for a particular entry */ +static struct pdi * +hermes_find_pdi(struct pdi *first_pdi, u32 record_id) +{ + struct pdi *pdi = first_pdi; + + while (pdi_id(pdi) != PDI_END) { + + /* If the record ID matches, we are done */ + if (pdi_id(pdi) == record_id) + return pdi; + + pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return NULL; +} + +/* Process one Plug Data Item - find corresponding PDR and plug it */ +static int +hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi) +{ + struct pdr *pdr; + + /* Find the PDR corresponding to this PDI */ + pdr = hermes_find_pdr(first_pdr, pdi_id(pdi)); + + /* No match is found, safe to ignore */ + if (!pdr) + return 0; + + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) != pdr_len(pdr)) + return -EINVAL; + + /* do the actual plugging */ + hermes_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); + + return 0; +} + +/* Read PDA from the adapter */ +int hermes_read_pda(hermes_t *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom) /* can we get this into hw? */ +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (use_eeprom) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* read PDA from EEPROM */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(hermes_read_pda); + +/* Parse PDA and write the records into the adapter + * + * Attempt to write every records that is in the specified pda + * which also has a valid production data record for the firmware. + */ +int hermes_apply_pda(hermes_t *hw, + const char *first_pdr, + const __le16 *pda) +{ + int ret; + const struct pdi *pdi; + struct pdr *pdr; + + pdr = (struct pdr *) first_pdr; + + /* Go through every PDI and plug them into the adapter */ + pdi = (const struct pdi *) (pda + 2); + while (pdi_id(pdi) != PDI_END) { + ret = hermes_plug_pdi(hw, pdr, pdi); + if (ret) + return ret; + + /* Increment to the next PDI */ + pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return 0; +} +EXPORT_SYMBOL(hermes_apply_pda); + +/* Identify the total number of bytes in all blocks + * including the header data. + */ +size_t +hermes_blocks_length(const char *first_block) +{ + const struct dblock *blk = (const struct dblock *) first_block; + int total_len = 0; + int len; + + /* Skip all blocks to locate Plug Data References + * (Spectrum CS) */ + while (dblock_addr(blk) != BLOCK_END) { + len = dblock_len(blk); + total_len += sizeof(*blk) + len; + blk = (struct dblock *) &blk->data[len]; + } + + return total_len; +} +EXPORT_SYMBOL(hermes_blocks_length); + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +int hermesi_program_init(hermes_t *hw, u32 offset) +{ + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using doicmd_wait rather than docmd_wait */ + err = hermes_doicmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_doicmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + printk(KERN_DEBUG PFX "AUX enable returned %d\n", err); + + if (err) + return err; + + printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset); + err = hermes_doicmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n", + err); + + return err; +} +EXPORT_SYMBOL(hermesi_program_init); + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +int hermesi_program_end(hermes_t *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + printk(KERN_DEBUG PFX "AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} +EXPORT_SYMBOL(hermesi_program_end); + +/* Program the data blocks */ +int hermes_program(hermes_t *hw, const char *first_block, const char *end) +{ + const struct dblock *blk; + u32 blkaddr; + u32 blklen; +#if LIMIT_PROGRAM_SIZE + u32 addr; + u32 len; +#endif + + blk = (const struct dblock *) first_block; + + if ((const char *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + + while ((blkaddr != BLOCK_END) && + (((const char *) blk + blklen) <= end)) { + printk(KERN_DEBUG PFX + "Programming block of length %d to address 0x%08x\n", + blklen, blkaddr); + +#if !LIMIT_PROGRAM_SIZE + /* wl_lkm driver splits this into writes of 2000 bytes */ + hermes_aux_setaddr(hw, blkaddr); + hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, + blklen); +#else + len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE; + addr = blkaddr; + + while (addr < (blkaddr + blklen)) { + printk(KERN_DEBUG PFX + "Programming subblock of length %d " + "to address 0x%08x. Data @ %p\n", + len, addr, &blk->data[addr - blkaddr]); + + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, + &blk->data[addr - blkaddr], + len); + + addr += len; + len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ? + (blkaddr + blklen - addr) : MAX_DL_SIZE; + } +#endif + blk = (const struct dblock *) &blk->data[blklen]; + + if ((const char *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + } + return 0; +} +EXPORT_SYMBOL(hermes_program); + +static int __init init_hermes_dld(void) +{ + return 0; +} + +static void __exit exit_hermes_dld(void) +{ +} + +module_init(init_hermes_dld); +module_exit(exit_hermes_dld); + +/*** Default plugging data for Hermes I ***/ +/* Values from wl_lkm_718/hcf/dhf.c */ + +#define DEFINE_DEFAULT_PDR(pid, length, data) \ +static const struct { \ + __le16 len; \ + __le16 id; \ + u8 val[length]; \ +} __attribute__ ((packed)) default_pdr_data_##pid = { \ + __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ + sizeof(__le16)) - 1), \ + __constant_cpu_to_le16(pid), \ + data \ +} + +#define DEFAULT_PDR(pid) default_pdr_data_##pid + +/* HWIF Compatiblity */ +DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); + +/* PPPPSign */ +DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00"); + +/* PPPPProf */ +DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00"); + +/* Antenna diversity */ +DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F"); + +/* Modem VCO band Set-up */ +DEFINE_DEFAULT_PDR(0x0160, 28, + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00"); + +/* Modem Rx Gain Table Values */ +DEFINE_DEFAULT_PDR(0x0161, 256, + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3E\01\x3E\x01\x3D\x01" + "\x3D\x01\x3C\01\x3C\x01\x3B\x01" + "\x3B\x01\x3A\01\x3A\x01\x39\x01" + "\x39\x01\x38\01\x38\x01\x37\x01" + "\x37\x01\x36\01\x36\x01\x35\x01" + "\x35\x01\x34\01\x34\x01\x33\x01" + "\x33\x01\x32\x01\x32\x01\x31\x01" + "\x31\x01\x30\x01\x30\x01\x7B\x01" + "\x7B\x01\x7A\x01\x7A\x01\x79\x01" + "\x79\x01\x78\x01\x78\x01\x77\x01" + "\x77\x01\x76\x01\x76\x01\x75\x01" + "\x75\x01\x74\x01\x74\x01\x73\x01" + "\x73\x01\x72\x01\x72\x01\x71\x01" + "\x71\x01\x70\x01\x70\x01\x68\x01" + "\x68\x01\x67\x01\x67\x01\x66\x01" + "\x66\x01\x65\x01\x65\x01\x57\x01" + "\x57\x01\x56\x01\x56\x01\x55\x01" + "\x55\x01\x54\x01\x54\x01\x53\x01" + "\x53\x01\x52\x01\x52\x01\x51\x01" + "\x51\x01\x50\x01\x50\x01\x48\x01" + "\x48\x01\x47\x01\x47\x01\x46\x01" + "\x46\x01\x45\x01\x45\x01\x44\x01" + "\x44\x01\x43\x01\x43\x01\x42\x01" + "\x42\x01\x41\x01\x41\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01"); + +/* Write PDA according to certain rules. + * + * For every production data record, look for a previous setting in + * the pda, and use that. + * + * For certain records, use defaults if they are not found in pda. + */ +int hermes_apply_pda_with_defaults(hermes_t *hw, + const char *first_pdr, + const __le16 *pda) +{ + const struct pdr *pdr = (const struct pdr *) first_pdr; + struct pdi *first_pdi = (struct pdi *) &pda[2]; + struct pdi *pdi; + struct pdi *default_pdi = NULL; + struct pdi *outdoor_pdi; + void *end = (void *)first_pdr + MAX_PDA_SIZE; + int record_id; + + while (((void *)pdr < end) && + (pdr_id(pdr) != PDI_END)) { + /* + * For spectrum_cs firmwares, + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + break; + record_id = pdr_id(pdr); + + pdi = hermes_find_pdi(first_pdi, record_id); + if (pdi) + printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n", + record_id, pdi); + + switch (record_id) { + case 0x110: /* Modem REFDAC values */ + case 0x120: /* Modem VGDAC values */ + outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1); + default_pdi = NULL; + if (outdoor_pdi) { + pdi = outdoor_pdi; + printk(KERN_DEBUG PFX + "Using outdoor record 0x%04x at %p\n", + record_id + 1, pdi); + } + break; + case 0x5: /* HWIF Compatiblity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); + break; + case 0x108: /* PPPPSign */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108); + break; + case 0x109: /* PPPPProf */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109); + break; + case 0x150: /* Antenna diversity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150); + break; + case 0x160: /* Modem VCO band Set-up */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160); + break; + case 0x161: /* Modem Rx Gain Table Values */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161); + break; + default: + default_pdi = NULL; + break; + } + if (!pdi && default_pdi) { + /* Use default */ + pdi = default_pdi; + printk(KERN_DEBUG PFX + "Using default record 0x%04x at %p\n", + record_id, pdi); + } + + if (pdi) { + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) == pdr_len(pdr)) { + /* do the actual plugging */ + hermes_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, + pdi->data, pdi_len(pdi)); + } + } + + pdr++; + } + return 0; +} +EXPORT_SYMBOL(hermes_apply_pda_with_defaults); diff --git a/drivers/net/wireless/hermes_dld.h b/drivers/net/wireless/hermes_dld.h new file mode 100644 index 00000000000..6fcb2627799 --- /dev/null +++ b/drivers/net/wireless/hermes_dld.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007, David Kilroy + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ +#ifndef _HERMES_DLD_H +#define _HERMES_DLD_H + +#include "hermes.h" + +int hermesi_program_init(hermes_t *hw, u32 offset); +int hermesi_program_end(hermes_t *hw); +int hermes_program(hermes_t *hw, const char *first_block, const char *end); + +int hermes_read_pda(hermes_t *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom); +int hermes_apply_pda(hermes_t *hw, + const char *first_pdr, + const __le16 *pda); +int hermes_apply_pda_with_defaults(hermes_t *hw, + const char *first_pdr, + const __le16 *pda); + +size_t hermes_blocks_length(const char *first_block); + +#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/hermes_rid.h b/drivers/net/wireless/hermes_rid.h index 4f46b4809e5..42eb67dea1d 100644 --- a/drivers/net/wireless/hermes_rid.h +++ b/drivers/net/wireless/hermes_rid.h @@ -30,6 +30,7 @@ #define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 #define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 #define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 +#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22 #define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 #define HERMES_RID_CNFDEFAULTKEY0 0xFC24 #define HERMES_RID_CNFDEFAULTKEY1 0xFC25 @@ -85,6 +86,16 @@ #define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 #define HERMES_RID_CNFBASICRATES 0xFCB3 #define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4 +#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5 +#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6 +#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7 +#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8 +#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9 +#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA +#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB +#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2 +#define HERMES_RID_CNFDISASSOCIATE 0xFCC8 #define HERMES_RID_CNFTICKTIME 0xFCE0 #define HERMES_RID_CNFSCANREQUEST 0xFCE1 #define HERMES_RID_CNFJOINREQUEST 0xFCE2 @@ -137,6 +148,12 @@ #define HERMES_RID_CURRENTTXRATE6 0xFD85 #define HERMES_RID_OWNMACADDR 0xFD86 #define HERMES_RID_SCANRESULTSTABLE 0xFD88 +#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89 +#define HERMES_RID_CURRENT_WPA_IE 0xFD8A +#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B +#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C +#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D +#define HERMES_RID_TXQUEUEEMPTY 0xFD91 #define HERMES_RID_PHYTYPE 0xFDC0 #define HERMES_RID_CURRENTCHANNEL 0xFDC1 #define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 19a401c4a0d..bca74811bc7 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -211,7 +211,7 @@ static u32 ipw2100_debug_level = IPW_DL_NONE; do { \ if (ipw2100_debug_level & (level)) { \ printk(KERN_DEBUG "ipw2100: %c %s ", \ - in_interrupt() ? 'I' : 'U', __FUNCTION__); \ + in_interrupt() ? 'I' : 'U', __func__); \ printk(message); \ } \ } while (0) diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index d4ab28b73b3..0bad1ec3e7e 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1394,13 +1394,13 @@ BIT_ARG16(x) #define IPW_DEBUG(level, fmt, args...) \ do { if (ipw_debug_level & (level)) \ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #ifdef CONFIG_IPW2200_DEBUG #define IPW_LL_DEBUG(level, fmt, args...) \ do { if (ipw_debug_level & (level)) \ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #else #define IPW_LL_DEBUG(level, fmt, args...) do {} while (0) #endif /* CONFIG_IPW2200_DEBUG */ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debug.h b/drivers/net/wireless/iwlwifi/iwl-3945-debug.h index f1d002f7b79..33016fb5e9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-debug.h @@ -34,12 +34,12 @@ extern u32 iwl3945_debug_level; #define IWL_DEBUG(level, fmt, args...) \ do { if (iwl3945_debug_level & (level)) \ printk(KERN_ERR DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #define IWL_DEBUG_LIMIT(level, fmt, args...) \ do { if ((iwl3945_debug_level & (level)) && net_ratelimit()) \ printk(KERN_ERR DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) static inline void iwl3945_print_hex_dump(int level, void *p, u32 len) { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-io.h b/drivers/net/wireless/iwlwifi/iwl-3945-io.h index 0b947511461..b3fe48de3ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-io.h @@ -59,7 +59,7 @@ * */ -#define _iwl3945_write32(priv, ofs, val) writel((val), (priv)->hw_base + (ofs)) +#define _iwl3945_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs)) #ifdef CONFIG_IWL3945_DEBUG static inline void __iwl3945_write32(const char *f, u32 l, struct iwl3945_priv *priv, u32 ofs, u32 val) @@ -73,14 +73,14 @@ static inline void __iwl3945_write32(const char *f, u32 l, struct iwl3945_priv * #define iwl3945_write32(priv, ofs, val) _iwl3945_write32(priv, ofs, val) #endif -#define _iwl3945_read32(priv, ofs) readl((priv)->hw_base + (ofs)) +#define _iwl3945_read32(priv, ofs) ioread32((priv)->hw_base + (ofs)) #ifdef CONFIG_IWL3945_DEBUG static inline u32 __iwl3945_read32(char *f, u32 l, struct iwl3945_priv *priv, u32 ofs) { IWL_DEBUG_IO("read_direct32(0x%08X) - %s %d\n", ofs, f, l); return _iwl3945_read32(priv, ofs); } -#define iwl3945_read32(priv, ofs) __iwl3945_read32(__FILE__, __LINE__, priv, ofs) +#define iwl3945_read32(priv, ofs)__iwl3945_read32(__FILE__, __LINE__, priv, ofs) #else #define iwl3945_read32(p, o) _iwl3945_read32(p, o) #endif @@ -153,28 +153,10 @@ static inline void __iwl3945_clear_bit(const char *f, u32 l, static inline int _iwl3945_grab_nic_access(struct iwl3945_priv *priv) { int ret; - u32 gp_ctl; - #ifdef CONFIG_IWL3945_DEBUG if (atomic_read(&priv->restrict_refcnt)) return 0; #endif - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) { - IWL_WARNING("WARNING: Requesting MAC access during RFKILL " - "wakes up NIC\n"); - - /* 10 msec allows time for NIC to complete its data save */ - gp_ctl = _iwl3945_read32(priv, CSR_GP_CNTRL); - if (gp_ctl & CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY) { - IWL_DEBUG_RF_KILL("Wait for complete power-down, " - "gpctl = 0x%08x\n", gp_ctl); - mdelay(10); - } else - IWL_DEBUG_RF_KILL("power-down complete, " - "gpctl = 0x%08x\n", gp_ctl); - } - /* this bit wakes up the NIC */ _iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); ret = _iwl3945_poll_bit(priv, CSR_GP_CNTRL, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 10c64bdb314..6fc5e7361f2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -36,8 +36,6 @@ #include <linux/workqueue.h> -#include "../net/mac80211/rate.h" - #include "iwl-3945.h" #define RS_NAME "iwl-3945-rs" @@ -65,6 +63,9 @@ struct iwl3945_rs_sta { u8 ibss_sta_added; struct timer_list rate_scale_flush; struct iwl3945_rate_scale_data win[IWL_RATE_COUNT]; + + /* used to be in sta_info */ + int last_txrate_idx; }; static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT] = { @@ -316,9 +317,10 @@ static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta, } } -static void rs_rate_init(void *priv_rate, void *priv_sta, - struct ieee80211_local *local, struct sta_info *sta) +static void rs_rate_init(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) { + struct iwl3945_rs_sta *rs_sta = priv_sta; int i; IWL_DEBUG_RATE("enter\n"); @@ -329,24 +331,22 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, * after assoc.. */ for (i = IWL_RATE_COUNT - 1; i >= 0; i--) { - if (sta->supp_rates[local->hw.conf.channel->band] & (1 << i)) { - sta->txrate_idx = i; + if (sta->supp_rates[sband->band] & (1 << i)) { + rs_sta->last_txrate_idx = i; break; } } - sta->last_txrate_idx = sta->txrate_idx; - /* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */ - if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) - sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; + if (sband->band == IEEE80211_BAND_5GHZ) + rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; IWL_DEBUG_RATE("leave\n"); } -static void *rs_alloc(struct ieee80211_local *local) +static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { - return local->hw.priv; + return hw->priv; } /* rate scale requires free function to be implemented */ @@ -354,17 +354,24 @@ static void rs_free(void *priv) { return; } + static void rs_clear(void *priv) { return; } -static void *rs_alloc_sta(void *priv, gfp_t gfp) +static void *rs_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) { struct iwl3945_rs_sta *rs_sta; + struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; int i; + /* + * XXX: If it's using sta->drv_priv anyway, it might + * as well just put all the information there. + */ + IWL_DEBUG_RATE("enter\n"); rs_sta = kzalloc(sizeof(struct iwl3945_rs_sta), gfp); @@ -373,6 +380,8 @@ static void *rs_alloc_sta(void *priv, gfp_t gfp) return NULL; } + psta->rs_sta = rs_sta; + spin_lock_init(&rs_sta->lock); rs_sta->start_rate = IWL_RATE_INVALID; @@ -398,10 +407,14 @@ static void *rs_alloc_sta(void *priv, gfp_t gfp) return rs_sta; } -static void rs_free_sta(void *priv, void *priv_sta) +static void rs_free_sta(void *priv, struct ieee80211_sta *sta, + void *priv_sta) { + struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; struct iwl3945_rs_sta *rs_sta = priv_sta; + psta->rs_sta = NULL; + IWL_DEBUG_RATE("enter\n"); del_timer_sync(&rs_sta->rate_scale_flush); kfree(rs_sta); @@ -443,26 +456,19 @@ static int rs_adjust_next_rate(struct iwl3945_priv *priv, int rate) * NOTE: Uses iwl3945_priv->retry_rate for the # of retries attempted by * the hardware for each rate. */ -static void rs_tx_status(void *priv_rate, - struct net_device *dev, +static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { u8 retries, current_count; int scale_rate_index, first_index, last_index; unsigned long flags; - struct sta_info *sta; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct iwl3945_rs_sta *rs_sta; - struct ieee80211_supported_band *sband; + struct iwl3945_rs_sta *rs_sta = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); IWL_DEBUG_RATE("enter\n"); - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - retries = info->status.retry_count; first_index = sband->bitrates[info->tx_rate_idx].hw_value; if ((first_index < 0) || (first_index >= IWL_RATE_COUNT)) { @@ -470,17 +476,11 @@ static void rs_tx_status(void *priv_rate, return; } - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - if (!sta || !sta->rate_ctrl_priv) { - rcu_read_unlock(); + if (!priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); return; } - rs_sta = (void *)sta->rate_ctrl_priv; - rs_sta->tx_packets++; scale_rate_index = first_index; @@ -547,8 +547,6 @@ static void rs_tx_status(void *priv_rate, spin_unlock_irqrestore(&rs_sta->lock, flags); - rcu_read_unlock(); - IWL_DEBUG_RATE("leave\n"); return; @@ -632,16 +630,15 @@ static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta, * rate table and must reference the driver allocated rate table * */ -static void rs_get_rate(void *priv_rate, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb, struct rate_selection *sel) { u8 low = IWL_RATE_INVALID; u8 high = IWL_RATE_INVALID; u16 high_low; int index; - struct iwl3945_rs_sta *rs_sta; + struct iwl3945_rs_sta *rs_sta = priv_sta; struct iwl3945_rate_scale_data *window = NULL; int current_tpt = IWL_INV_TPT; int low_tpt = IWL_INV_TPT; @@ -649,40 +646,31 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev, u32 fail_count; s8 scale_action = 0; unsigned long flags; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct sta_info *sta; u16 fc, rate_mask; - struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate; + struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; DECLARE_MAC_BUF(mac); IWL_DEBUG_RATE("enter\n"); - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || is_multicast_ether_addr(hdr->addr1) || - !sta || !sta->rate_ctrl_priv) { + !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - sel->rate_idx = rate_lowest_index(local, sband, sta); - rcu_read_unlock(); + sel->rate_idx = rate_lowest_index(sband, sta); return; } rate_mask = sta->supp_rates[sband->band]; - index = min(sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1); + index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1); if (sband->band == IEEE80211_BAND_5GHZ) rate_mask = rate_mask << IWL_FIRST_OFDM_RATE; - rs_sta = (void *)sta->rate_ctrl_priv; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !rs_sta->ibss_sta_added) { u8 sta_id = iwl3945_hw_find_station(priv, hdr->addr1); @@ -803,17 +791,13 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev, out: - sta->last_txrate_idx = index; + rs_sta->last_txrate_idx = index; if (sband->band == IEEE80211_BAND_5GHZ) - sta->txrate_idx = sta->last_txrate_idx - IWL_FIRST_OFDM_RATE; + sel->rate_idx = rs_sta->last_txrate_idx - IWL_FIRST_OFDM_RATE; else - sta->txrate_idx = sta->last_txrate_idx; - - rcu_read_unlock(); + sel->rate_idx = rs_sta->last_txrate_idx; IWL_DEBUG_RATE("leave: %d\n", index); - - sel->rate_idx = sta->txrate_idx; } static struct rate_control_ops rs_ops = { @@ -829,114 +813,28 @@ static struct rate_control_ops rs_ops = { .free_sta = rs_free_sta, }; -int iwl3945_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct iwl3945_priv *priv = hw->priv; - struct iwl3945_rs_sta *rs_sta; - struct sta_info *sta; - unsigned long flags; - int count = 0, i; - u32 samples = 0, success = 0, good = 0; - unsigned long now = jiffies; - u32 max_time = 0; - - rcu_read_lock(); - - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { - if (sta) - IWL_DEBUG_RATE("leave - no private rate data!\n"); - else - IWL_DEBUG_RATE("leave - no station!\n"); - rcu_read_unlock(); - return sprintf(buf, "station %d not found\n", sta_id); - } - - rs_sta = (void *)sta->rate_ctrl_priv; - spin_lock_irqsave(&rs_sta->lock, flags); - i = IWL_RATE_54M_INDEX; - while (1) { - u64 mask; - int j; - - count += - sprintf(&buf[count], " %2dMbs: ", iwl3945_rates[i].ieee / 2); - - mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); - for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) - buf[count++] = - (rs_sta->win[i].data & mask) ? '1' : '0'; - - samples += rs_sta->win[i].counter; - good += rs_sta->win[i].success_counter; - success += rs_sta->win[i].success_counter * - iwl3945_rates[i].ieee; - - if (rs_sta->win[i].stamp) { - int delta = - jiffies_to_msecs(now - rs_sta->win[i].stamp); - - if (delta > max_time) - max_time = delta; - - count += sprintf(&buf[count], "%5dms\n", delta); - } else - buf[count++] = '\n'; - - j = iwl3945_get_prev_ieee_rate(i); - if (j == i) - break; - i = j; - } - spin_unlock_irqrestore(&rs_sta->lock, flags); - rcu_read_unlock(); - - /* Display the average rate of all samples taken. - * - * NOTE: We multiple # of samples by 2 since the IEEE measurement - * added from iwl3945_rates is actually 2X the rate */ - if (samples) - count += sprintf( - &buf[count], - "\nAverage rate is %3d.%02dMbs over last %4dms\n" - "%3d%% success (%d good packets over %d tries)\n", - success / (2 * samples), (success * 5 / samples) % 10, - max_time, good * 100 / samples, good, samples); - else - count += sprintf(&buf[count], "\nAverage rate: 0Mbs\n"); - - return count; -} - void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) { struct iwl3945_priv *priv = hw->priv; s32 rssi = 0; unsigned long flags; - struct ieee80211_local *local = hw_to_local(hw); struct iwl3945_rs_sta *rs_sta; - struct sta_info *sta; + struct ieee80211_sta *sta; + struct iwl3945_sta_priv *psta; IWL_DEBUG_RATE("enter\n"); - if (!local->rate_ctrl->ops->name || - strcmp(local->rate_ctrl->ops->name, RS_NAME)) { - IWL_WARNING("iwl-3945-rs not selected as rate control algo!\n"); - IWL_DEBUG_RATE("leave - mac80211 picked the wrong RC algo.\n"); - return; - } - rcu_read_lock(); - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { + sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr); + psta = (void *) sta->drv_priv; + if (!sta || !psta) { IWL_DEBUG_RATE("leave - no private rate data!\n"); rcu_read_unlock(); return; } - rs_sta = (void *)sta->rate_ctrl_priv; + rs_sta = psta->rs_sta; spin_lock_irqsave(&rs_sta->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.h b/drivers/net/wireless/iwlwifi/iwl-3945-rs.h index f085d330bdc..98b17ae6ef2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.h @@ -176,15 +176,6 @@ static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index) } /** - * iwl3945_fill_rs_info - Fill an output text buffer with the rate representation - * - * NOTE: This is provided as a quick mechanism for a user to visualize - * the performance of the rate control algorithm and is not meant to be - * parsed software. - */ -extern int iwl3945_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); - -/** * iwl3945_rate_scale_init - Initialize the rate scale table based on assoc info * * The specific throughput table used is based on the type of network diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 3f51f363534..7ca5627cc07 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -520,10 +520,10 @@ static int iwl3945_is_network_packet(struct iwl3945_priv *priv, /* Filter incoming packets to determine if they are targeted toward * this network, discarding packets coming from ourselves */ switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ + case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ /* packets to our IBSS update information */ return !compare_ether_addr(header->addr3, priv->bssid); - case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ + case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ /* packets to our IBSS update information */ return !compare_ether_addr(header->addr2, priv->bssid); default: @@ -531,99 +531,6 @@ static int iwl3945_is_network_packet(struct iwl3945_priv *priv, } } -static void iwl3945_add_radiotap(struct iwl3945_priv *priv, - struct sk_buff *skb, - struct iwl3945_rx_frame_hdr *rx_hdr, - struct ieee80211_rx_status *stats) -{ - /* First cache any information we need before we overwrite - * the information provided in the skb from the hardware */ - s8 signal = stats->signal; - s8 noise = 0; - int rate = stats->rate_idx; - u64 tsf = stats->mactime; - __le16 phy_flags_hw = rx_hdr->phy_flags, antenna; - - struct iwl3945_rt_rx_hdr { - struct ieee80211_radiotap_header rt_hdr; - __le64 rt_tsf; /* TSF */ - u8 rt_flags; /* radiotap packet flags */ - u8 rt_rate; /* rate in 500kb/s */ - __le16 rt_channelMHz; /* channel in MHz */ - __le16 rt_chbitmask; /* channel bitfield */ - s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ - s8 rt_dbmnoise; - u8 rt_antenna; /* antenna number */ - } __attribute__ ((packed)) *iwl3945_rt; - - if (skb_headroom(skb) < sizeof(*iwl3945_rt)) { - if (net_ratelimit()) - printk(KERN_ERR "not enough headroom [%d] for " - "radiotap head [%zd]\n", - skb_headroom(skb), sizeof(*iwl3945_rt)); - return; - } - - /* put radiotap header in front of 802.11 header and data */ - iwl3945_rt = (void *)skb_push(skb, sizeof(*iwl3945_rt)); - - /* initialise radiotap header */ - iwl3945_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; - iwl3945_rt->rt_hdr.it_pad = 0; - - /* total header + data */ - put_unaligned_le16(sizeof(*iwl3945_rt), &iwl3945_rt->rt_hdr.it_len); - - /* Indicate all the fields we add to the radiotap header */ - put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA), - &iwl3945_rt->rt_hdr.it_present); - - /* Zero the flags, we'll add to them as we go */ - iwl3945_rt->rt_flags = 0; - - put_unaligned_le64(tsf, &iwl3945_rt->rt_tsf); - - iwl3945_rt->rt_dbmsignal = signal; - iwl3945_rt->rt_dbmnoise = noise; - - /* Convert the channel frequency and set the flags */ - put_unaligned_le16(stats->freq, &iwl3945_rt->rt_channelMHz); - if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, - &iwl3945_rt->rt_chbitmask); - else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, - &iwl3945_rt->rt_chbitmask); - else /* 802.11g */ - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, - &iwl3945_rt->rt_chbitmask); - - if (rate == -1) - iwl3945_rt->rt_rate = 0; - else { - if (stats->band == IEEE80211_BAND_5GHZ) - rate += IWL_FIRST_OFDM_RATE; - - iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee; - } - - /* antenna number */ - antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; - iwl3945_rt->rt_antenna = le16_to_cpu(antenna) >> 4; - - /* set the preamble flag if we have it */ - if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - iwl3945_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; - - stats->flag |= RX_FLAG_RADIOTAP; -} - static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb, struct ieee80211_rx_status *stats) @@ -657,9 +564,6 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, iwl3945_set_decrypted_flag(priv, rxb->skb, le32_to_cpu(rx_end->status), stats); - if (priv->add_radiotap) - iwl3945_add_radiotap(priv, rxb->skb, rx_hdr, stats); - #ifdef CONFIG_IWL3945_LEDS if (ieee80211_is_data(hdr->frame_control)) priv->rxtxpackets += len; @@ -684,7 +588,6 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff); u8 network_packet; - rx_status.antenna = 0; rx_status.flag = 0; rx_status.mactime = le64_to_cpu(rx_end->timestamp); rx_status.freq = @@ -696,6 +599,13 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; + rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags & + RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; + + /* set the preamble flag if appropriate */ + if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + if ((unlikely(rx_stats->phy_count > 20))) { IWL_DEBUG_DROP ("dsp size out of range [0,20]: " @@ -771,100 +681,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, priv->last_rx_noise = rx_status.noise; } - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); - return; - } - - switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { - case IEEE80211_FTYPE_MGMT: - switch (le16_to_cpu(header->frame_control) & - IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_PROBE_RESP: - case IEEE80211_STYPE_BEACON:{ - /* If this is a beacon or probe response for - * our network then cache the beacon - * timestamp */ - if ((((priv->iw_mode == IEEE80211_IF_TYPE_STA) - && !compare_ether_addr(header->addr2, - priv->bssid)) || - ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - && !compare_ether_addr(header->addr3, - priv->bssid)))) { - struct ieee80211_mgmt *mgmt = - (struct ieee80211_mgmt *)header; - __le32 *pos; - pos = (__le32 *)&mgmt->u.beacon. - timestamp; - priv->timestamp0 = le32_to_cpu(pos[0]); - priv->timestamp1 = le32_to_cpu(pos[1]); - priv->beacon_int = le16_to_cpu( - mgmt->u.beacon.beacon_int); - if (priv->call_post_assoc_from_beacon && - (priv->iw_mode == - IEEE80211_IF_TYPE_STA)) - queue_work(priv->workqueue, - &priv->post_associate.work); - - priv->call_post_assoc_from_beacon = 0; - } - - break; - } - - case IEEE80211_STYPE_ACTION: - /* TODO: Parse 802.11h frames for CSA... */ - break; - - /* - * TODO: Use the new callback function from - * mac80211 instead of sniffing these packets. - */ - case IEEE80211_STYPE_ASSOC_RESP: - case IEEE80211_STYPE_REASSOC_RESP:{ - struct ieee80211_mgmt *mgnt = - (struct ieee80211_mgmt *)header; - - /* We have just associated, give some - * time for the 4-way handshake if - * any. Don't start scan too early. */ - priv->next_scan_jiffies = jiffies + - IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - - priv->assoc_id = (~((1 << 15) | (1 << 14)) & - le16_to_cpu(mgnt->u. - assoc_resp.aid)); - priv->assoc_capability = - le16_to_cpu(mgnt->u.assoc_resp.capab_info); - if (priv->beacon_int) - queue_work(priv->workqueue, - &priv->post_associate.work); - else - priv->call_post_assoc_from_beacon = 1; - break; - } - - case IEEE80211_STYPE_PROBE_REQ:{ - DECLARE_MAC_BUF(mac1); - DECLARE_MAC_BUF(mac2); - DECLARE_MAC_BUF(mac3); - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - IWL_DEBUG_DROP - ("Dropping (non network): %s" - ", %s, %s\n", - print_mac(mac1, header->addr1), - print_mac(mac2, header->addr2), - print_mac(mac3, header->addr3)); - return; - } - } - - case IEEE80211_FTYPE_DATA: - /* fall through */ - default: - iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); - break; - } + iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); } int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr, @@ -990,7 +807,7 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, priv->stations[sta_id].current_rate.rate_n_flags = rate; - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && (sta_id != priv->hw_setting.bcast_sta_id) && (sta_id != IWL_MULTICAST_ID)) priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index fa81ba1af3d..bdd32475b99 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -73,6 +73,10 @@ extern struct pci_device_id iwl3945_hw_card_ids[]; extern int iwl3945_param_hwcrypto; extern int iwl3945_param_queues_num; +struct iwl3945_sta_priv { + struct iwl3945_rs_sta *rs_sta; +}; + enum iwl3945_antenna { IWL_ANTENNA_DIVERSITY, IWL_ANTENNA_MAIN, @@ -707,7 +711,6 @@ struct iwl3945_priv { enum ieee80211_band band; int alloc_rxb_skb; - bool add_radiotap; void (*rx_handlers[REPLY_MAX])(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb); @@ -852,7 +855,7 @@ struct iwl3945_priv { /* eeprom */ struct iwl3945_eeprom eeprom; - enum ieee80211_if_types iw_mode; + enum nl80211_iftype iw_mode; struct sk_buff *ibss_beacon; @@ -895,7 +898,6 @@ struct iwl3945_priv { struct delayed_work thermal_periodic; struct delayed_work gather_stats; struct delayed_work scan_check; - struct delayed_work post_associate; #define IWL_DEFAULT_TX_POWER 0x0F s8 user_txpower_limit; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index fce950f4163..f4793a60944 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -98,16 +98,17 @@ #define IWL_RSSI_OFFSET 44 -#include "iwl-commands.h" /* PCI registers */ -#define PCI_LINK_CTRL 0x0F0 /* 1 byte */ -#define PCI_POWER_SOURCE 0x0C8 -#define PCI_REG_WUM8 0x0E8 +#define PCI_CFG_RETRY_TIMEOUT 0x041 +#define PCI_CFG_POWER_SOURCE 0x0C8 +#define PCI_REG_WUM8 0x0E8 +#define PCI_CFG_LINK_CTRL 0x0F0 /* PCI register values */ -#define PCI_LINK_VAL_L0S_EN 0x01 -#define PCI_LINK_VAL_L1_EN 0x02 +#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01 +#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02 +#define PCI_CFG_CMD_REG_INT_DIS_MSK 0x04 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) #define TFD_QUEUE_SIZE_MAX (256) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 23fed329896..9838de5f436 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -399,7 +399,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv) unsigned long flags; u32 val; u16 radio_cfg; - u8 val_link; + u16 link; spin_lock_irqsave(&priv->lock, flags); @@ -410,10 +410,10 @@ static void iwl4965_nic_config(struct iwl_priv *priv) val & ~(1 << 11)); } - pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link); /* L1 is enabled by BIOS */ - if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN) + if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) /* diable L0S disabled L1A enabled */ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); else @@ -1607,8 +1607,8 @@ static int iwl4965_send_rxon_assoc(struct iwl_priv *priv) return ret; } - -int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) +#ifdef IEEE80211_CONF_CHANNEL_SWITCH +static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) { int rc; u8 band = 0; @@ -1648,6 +1648,7 @@ int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); return rc; } +#endif static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h index 17d4f31c593..c479ee211c5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -129,6 +129,13 @@ struct iwl5000_shared { __le32 padding2; } __attribute__ ((packed)); +/* calibrations defined for 5000 */ +/* defines the order in which results should be sent to the runtime uCode */ +enum iwl5000_calib { + IWL5000_CALIB_LO, + IWL5000_CALIB_TX_IQ, + IWL5000_CALIB_TX_IQ_PERD, +}; #endif /* __iwl_5000_hw_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index b08036a9d89..f6003e7996a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -209,14 +209,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv) { unsigned long flags; u16 radio_cfg; - u8 val_link; + u16 link; spin_lock_irqsave(&priv->lock, flags); - pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link); /* L1 is enabled by BIOS */ - if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN) + if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) /* diable L0S disabled L1A enabled */ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); else @@ -445,48 +445,6 @@ static int iwl5000_send_Xtal_calib(struct iwl_priv *priv) sizeof(cal_cmd), &cal_cmd); } -static int iwl5000_send_calib_results(struct iwl_priv *priv) -{ - int ret = 0; - - struct iwl_host_cmd hcmd = { - .id = REPLY_PHY_CALIBRATION_CMD, - .meta.flags = CMD_SIZE_HUGE, - }; - - if (priv->calib_results.lo_res) { - hcmd.len = priv->calib_results.lo_res_len; - hcmd.data = priv->calib_results.lo_res; - ret = iwl_send_cmd_sync(priv, &hcmd); - - if (ret) - goto err; - } - - if (priv->calib_results.tx_iq_res) { - hcmd.len = priv->calib_results.tx_iq_res_len; - hcmd.data = priv->calib_results.tx_iq_res; - ret = iwl_send_cmd_sync(priv, &hcmd); - - if (ret) - goto err; - } - - if (priv->calib_results.tx_iq_perd_res) { - hcmd.len = priv->calib_results.tx_iq_perd_res_len; - hcmd.data = priv->calib_results.tx_iq_perd_res; - ret = iwl_send_cmd_sync(priv, &hcmd); - - if (ret) - goto err; - } - - return 0; -err: - IWL_ERROR("Error %d\n", ret); - return ret; -} - static int iwl5000_send_calib_cfg(struct iwl_priv *priv) { struct iwl5000_calib_cfg_cmd calib_cfg_cmd; @@ -511,33 +469,30 @@ static void iwl5000_rx_calib_result(struct iwl_priv *priv, struct iwl_rx_packet *pkt = (void *)rxb->skb->data; struct iwl5000_calib_hdr *hdr = (struct iwl5000_calib_hdr *)pkt->u.raw; int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK; - - iwl_free_calib_results(priv); + int index; /* reduce the size of the length field itself */ len -= 4; + /* Define the order in which the results will be sent to the runtime + * uCode. iwl_send_calib_results sends them in a row according to their + * index. We sort them here */ switch (hdr->op_code) { case IWL5000_PHY_CALIBRATE_LO_CMD: - priv->calib_results.lo_res = kzalloc(len, GFP_ATOMIC); - priv->calib_results.lo_res_len = len; - memcpy(priv->calib_results.lo_res, pkt->u.raw, len); + index = IWL5000_CALIB_LO; break; case IWL5000_PHY_CALIBRATE_TX_IQ_CMD: - priv->calib_results.tx_iq_res = kzalloc(len, GFP_ATOMIC); - priv->calib_results.tx_iq_res_len = len; - memcpy(priv->calib_results.tx_iq_res, pkt->u.raw, len); + index = IWL5000_CALIB_TX_IQ; break; case IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD: - priv->calib_results.tx_iq_perd_res = kzalloc(len, GFP_ATOMIC); - priv->calib_results.tx_iq_perd_res_len = len; - memcpy(priv->calib_results.tx_iq_perd_res, pkt->u.raw, len); + index = IWL5000_CALIB_TX_IQ_PERD; break; default: IWL_ERROR("Unknown calibration notification %d\n", hdr->op_code); return; } + iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len); } static void iwl5000_rx_calib_complete(struct iwl_priv *priv, @@ -832,7 +787,7 @@ static int iwl5000_alive_notify(struct iwl_priv *priv) iwl5000_send_Xtal_calib(priv); if (priv->ucode_type == UCODE_RT) - iwl5000_send_calib_results(priv); + iwl_send_calib_results(priv); return 0; } @@ -1614,6 +1569,8 @@ struct iwl_cfg iwl5350_agn_cfg = { .mod_params = &iwl50_mod_params, }; +MODULE_FIRMWARE("iwlwifi-5000" IWL5000_UCODE_API ".ucode"); + module_param_named(disable50, iwl50_mod_params.disable, int, 0444); MODULE_PARM_DESC(disable50, "manually disable the 50XX radio (default 0 [radio on])"); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 90a2b6dee7c..93944de923c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -35,8 +35,6 @@ #include <linux/workqueue.h> -#include "../net/mac80211/rate.h" - #include "iwl-dev.h" #include "iwl-sta.h" #include "iwl-core.h" @@ -163,12 +161,15 @@ struct iwl_lq_sta { u32 dbg_fixed_rate; #endif struct iwl_priv *drv; + + /* used to be in sta_info */ + int last_txrate_idx; }; static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, struct ieee80211_hdr *hdr, - struct sta_info *sta); + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta); static void rs_fill_link_cmd(const struct iwl_priv *priv, struct iwl_lq_sta *lq_sta, u32 rate_n_flags); @@ -354,17 +355,11 @@ static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, struct iwl_lq_sta *lq_data, u8 tid, - struct sta_info *sta) + struct ieee80211_sta *sta) { - unsigned long state; DECLARE_MAC_BUF(mac); - spin_lock_bh(&sta->lock); - state = sta->ampdu_mlme.tid_state_tx[tid]; - spin_unlock_bh(&sta->lock); - - if (state == HT_AGG_STATE_IDLE && - rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { + if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n", print_mac(mac, sta->addr), tid); ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid); @@ -373,7 +368,7 @@ static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, struct iwl_lq_sta *lq_data, - struct sta_info *sta) + struct ieee80211_sta *sta) { if ((tid < TID_MAX_LOAD_COUNT)) rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); @@ -436,7 +431,7 @@ static int rs_collect_tx_data(struct iwl_rate_scale_data *windows, /* Shift bitmap by one frame (throw away oldest history), * OR in "1", and increment "success" if this * frame was successful. */ - window->data <<= 1;; + window->data <<= 1; if (successes > 0) { window->success_counter++; window->data |= 0x1; @@ -773,7 +768,8 @@ out: /* * mac80211 sends us Tx status */ -static void rs_tx_status(void *priv_rate, struct net_device *dev, +static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { int status; @@ -781,11 +777,9 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, int rs_index, index = 0; struct iwl_lq_sta *lq_sta; struct iwl_link_quality_cmd *table; - struct sta_info *sta; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); + struct iwl_priv *priv = (struct iwl_priv *)priv_r; + struct ieee80211_hw *hw = priv->hw; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct iwl_rate_scale_data *window = NULL; struct iwl_rate_scale_data *search_win = NULL; @@ -811,17 +805,9 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, if (retries > 15) retries = 15; - rcu_read_lock(); + lq_sta = (struct iwl_lq_sta *)priv_sta; - sta = sta_info_get(local, hdr->addr1); - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - - lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !lq_sta->ibss_sta_added) goto out; @@ -965,9 +951,8 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, } /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, dev, hdr, sta); + rs_rate_scale_perform(priv, hdr, sta, lq_sta); out: - rcu_read_unlock(); return; } @@ -1128,6 +1113,7 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, /* Higher rate not available, use the original */ } else { + new_rate = rate; break; } } @@ -1142,7 +1128,7 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, static int rs_switch_to_mimo2(struct iwl_priv *priv, struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, + struct ieee80211_sta *sta, struct iwl_scale_tbl_info *tbl, int index) { u16 rate_mask; @@ -1153,8 +1139,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, !sta->ht_info.ht_supported) return -1; - if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2) - == IWL_MIMO_PS_STATIC) + if (((sta->ht_info.cap & IEEE80211_HT_CAP_SM_PS) >> 2) + == WLAN_HT_CAP_SM_PS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1210,7 +1196,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, static int rs_switch_to_siso(struct iwl_priv *priv, struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, + struct ieee80211_sta *sta, struct iwl_scale_tbl_info *tbl, int index) { u16 rate_mask; @@ -1270,7 +1256,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, static int rs_move_legacy_other(struct iwl_priv *priv, struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, + struct ieee80211_sta *sta, int index) { struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); @@ -1281,15 +1267,23 @@ static int rs_move_legacy_other(struct iwl_priv *priv, (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; int ret = 0; for (; ;) { switch (tbl->action) { - case IWL_LEGACY_SWITCH_ANTENNA: + case IWL_LEGACY_SWITCH_ANTENNA1: + case IWL_LEGACY_SWITCH_ANTENNA2: IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n"); lq_sta->action_counter++; + if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + /* Don't change antenna if success has been great */ if (window->success_ratio >= IWL_RS_GOOD_RATIO) break; @@ -1299,7 +1293,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv, if (rs_toggle_antenna(valid_tx_ant, &search_tbl->current_rate, search_tbl)) { - lq_sta->search_better_tbl = 1; + rs_set_expected_tpt_table(lq_sta, search_tbl); goto out; } break; @@ -1312,43 +1306,54 @@ static int rs_move_legacy_other(struct iwl_priv *priv, ret = rs_switch_to_siso(priv, lq_sta, conf, sta, search_tbl, index); if (!ret) { - lq_sta->search_better_tbl = 1; lq_sta->action_counter = 0; goto out; } break; - case IWL_LEGACY_SWITCH_MIMO2: + case IWL_LEGACY_SWITCH_MIMO2_AB: + case IWL_LEGACY_SWITCH_MIMO2_AC: + case IWL_LEGACY_SWITCH_MIMO2_BC: IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n"); /* Set up search table to try MIMO */ memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_AB;/*FIXME:RS*/ - /*FIXME:RS:need to check ant validity*/ + + if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, search_tbl, index); if (!ret) { - lq_sta->search_better_tbl = 1; lq_sta->action_counter = 0; goto out; } break; } tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; if (tbl->action == start_action) break; } + search_tbl->lq_type = LQ_NONE; return 0; - out: +out: + lq_sta->search_better_tbl = 1; tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; return 0; } @@ -1359,7 +1364,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv, static int rs_move_siso_to_other(struct iwl_priv *priv, struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, int index) + struct ieee80211_sta *sta, int index) { u8 is_green = lq_sta->is_green; struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); @@ -1370,34 +1375,51 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; int ret; for (;;) { lq_sta->action_counter++; switch (tbl->action) { - case IWL_SISO_SWITCH_ANTENNA: + case IWL_SISO_SWITCH_ANTENNA1: + case IWL_SISO_SWITCH_ANTENNA2: IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n"); + + if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 && + tx_chains_num <= 1) || + (tbl->action == IWL_SISO_SWITCH_ANTENNA2 && + tx_chains_num <= 2)) + break; + if (window->success_ratio >= IWL_RS_GOOD_RATIO) break; memcpy(search_tbl, tbl, sz); if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - lq_sta->search_better_tbl = 1; + &search_tbl->current_rate, search_tbl)) goto out; - } break; - case IWL_SISO_SWITCH_MIMO2: + case IWL_SISO_SWITCH_MIMO2_AB: + case IWL_SISO_SWITCH_MIMO2_AC: + case IWL_SISO_SWITCH_MIMO2_BC: IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n"); memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_AB; /*FIXME:RS*/ + + if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) + search_tbl->ant_type = ANT_AB; + else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) + search_tbl->ant_type = ANT_AC; + else + search_tbl->ant_type = ANT_BC; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; + if (!ret) goto out; - } break; case IWL_SISO_SWITCH_GI: if (!tbl->is_fat && @@ -1427,22 +1449,23 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, } search_tbl->current_rate = rate_n_flags_from_tbl( search_tbl, index, is_green); - lq_sta->search_better_tbl = 1; goto out; } tbl->action++; if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; + tbl->action = IWL_SISO_SWITCH_ANTENNA1; if (tbl->action == start_action) break; } + search_tbl->lq_type = LQ_NONE; return 0; out: + lq_sta->search_better_tbl = 1; tbl->action++; if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; + tbl->action = IWL_SISO_SWITCH_ANTENNA1; return 0; } @@ -1452,43 +1475,64 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, static int rs_move_mimo_to_other(struct iwl_priv *priv, struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, int index) + struct ieee80211_sta *sta, int index) { s8 is_green = lq_sta->is_green; struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); struct iwl_scale_tbl_info *search_tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); u32 sz = (sizeof(struct iwl_scale_tbl_info) - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; - /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + u8 tx_chains_num = priv->hw_params.tx_chains_num; int ret; for (;;) { lq_sta->action_counter++; switch (tbl->action) { - case IWL_MIMO_SWITCH_ANTENNA_A: - case IWL_MIMO_SWITCH_ANTENNA_B: + case IWL_MIMO2_SWITCH_ANTENNA1: + case IWL_MIMO2_SWITCH_ANTENNA2: + IWL_DEBUG_RATE("LQ: MIMO toggle Antennas\n"); + + if (tx_chains_num <= 2) + break; + + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) + goto out; + break; + case IWL_MIMO2_SWITCH_SISO_A: + case IWL_MIMO2_SWITCH_SISO_B: + case IWL_MIMO2_SWITCH_SISO_C: IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n"); /* Set up new search table for SISO */ memcpy(search_tbl, tbl, sz); - /*FIXME:RS:need to check ant validity + C*/ - if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) + if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) search_tbl->ant_type = ANT_A; - else + else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) search_tbl->ant_type = ANT_B; + else + search_tbl->ant_type = ANT_C; + + if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) + break; ret = rs_switch_to_siso(priv, lq_sta, conf, sta, search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; + if (!ret) goto out; - } + break; - case IWL_MIMO_SWITCH_GI: + case IWL_MIMO2_SWITCH_GI: if (!tbl->is_fat && !(priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ)) @@ -1517,23 +1561,23 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv, } search_tbl->current_rate = rate_n_flags_from_tbl( search_tbl, index, is_green); - lq_sta->search_better_tbl = 1; goto out; } tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; + if (tbl->action > IWL_MIMO2_SWITCH_GI) + tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; if (tbl->action == start_action) break; } - + search_tbl->lq_type = LQ_NONE; return 0; out: + lq_sta->search_better_tbl = 1; tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; + if (tbl->action > IWL_MIMO2_SWITCH_GI) + tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; return 0; } @@ -1624,12 +1668,11 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta) * Do rate scaling and search for new modulation mode. */ static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, struct ieee80211_hdr *hdr, - struct sta_info *sta) + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); + struct ieee80211_hw *hw = priv->hw; struct ieee80211_conf *conf = &hw->conf; int low = IWL_RATE_INVALID; int high = IWL_RATE_INVALID; @@ -1644,7 +1687,6 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, __le16 fc; u16 rate_mask; u8 update_lq = 0; - struct iwl_lq_sta *lq_sta; struct iwl_scale_tbl_info *tbl, *tbl1; u16 rate_scale_index_msk = 0; u32 rate; @@ -1665,10 +1707,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, return; } - if (!sta || !sta->rate_ctrl_priv) + if (!sta || !lq_sta) return; - lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; tid = rs_tl_add_packet(lq_sta, hdr); @@ -1686,7 +1728,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, is_green = lq_sta->is_green; /* current tx rate */ - index = sta->last_txrate_idx; + index = lq_sta->last_txrate_idx; IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, tbl->lq_type); @@ -1747,19 +1789,13 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, rs_stay_in_table(lq_sta); goto out; + } /* Else we have enough samples; calculate estimate of * actual average throughput */ - } else { - /*FIXME:RS remove this else if we don't get this error*/ - if (window->average_tpt != ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128)) { - IWL_ERROR("expected_tpt should have been calculated" - " by now\n"); - window->average_tpt = ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128); - } - } + + BUG_ON(window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)); /* If we are searching for better modulation mode, check success. */ if (lq_sta->search_better_tbl) { @@ -1769,7 +1805,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * continuing to use the setup that we've been trying. */ if (window->average_tpt > lq_sta->last_tpt) { - IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE " + IWL_DEBUG_RATE("LQ: SWITCHING TO NEW TABLE " "suc=%d cur-tpt=%d old-tpt=%d\n", window->success_ratio, window->average_tpt, @@ -2005,15 +2041,7 @@ lq_update: out: tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green); i = index; - sta->last_txrate_idx = i; - - /* sta->txrate_idx is an index to A mode rates which start - * at IWL_FIRST_OFDM_RATE - */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - sta->txrate_idx = i - IWL_FIRST_OFDM_RATE; - else - sta->txrate_idx = i; + lq_sta->last_txrate_idx = i; return; } @@ -2021,9 +2049,9 @@ out: static void rs_initialize_lq(struct iwl_priv *priv, struct ieee80211_conf *conf, - struct sta_info *sta) + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta) { - struct iwl_lq_sta *lq_sta; struct iwl_scale_tbl_info *tbl; int rate_idx; int i; @@ -2032,14 +2060,13 @@ static void rs_initialize_lq(struct iwl_priv *priv, u8 active_tbl = 0; u8 valid_tx_ant; - if (!sta || !sta->rate_ctrl_priv) + if (!sta || !lq_sta) goto out; - lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; + i = lq_sta->last_txrate_idx; if ((lq_sta->lq.sta_id == 0xff) && - (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) + (priv->iw_mode == NL80211_IFTYPE_ADHOC)) goto out; valid_tx_ant = priv->hw_params.valid_tx_ant; @@ -2076,40 +2103,33 @@ static void rs_initialize_lq(struct iwl_priv *priv, return; } -static void rs_get_rate(void *priv_rate, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb, struct rate_selection *sel) { int i; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_conf *conf = &local->hw.conf; + struct iwl_priv *priv = (struct iwl_priv *)priv_r; + struct ieee80211_conf *conf = &priv->hw->conf; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct sta_info *sta; __le16 fc; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; struct iwl_lq_sta *lq_sta; IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = hdr->frame_control; if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || - !sta || !sta->rate_ctrl_priv) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - goto out; + !sta || !priv_sta) { + sel->rate_idx = rate_lowest_index(sband, sta); + return; } - lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; + lq_sta = (struct iwl_lq_sta *)priv_sta; + i = lq_sta->last_txrate_idx; - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !lq_sta->ibss_sta_added) { u8 sta_id = iwl_find_station(priv, hdr->addr1); DECLARE_MAC_BUF(mac); @@ -2124,23 +2144,22 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev, lq_sta->lq.sta_id = sta_id; lq_sta->lq.rs_table[0].rate_n_flags = 0; lq_sta->ibss_sta_added = 1; - rs_initialize_lq(priv, conf, sta); + rs_initialize_lq(priv, conf, sta, lq_sta); } } if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - goto out; + sel->rate_idx = rate_lowest_index(sband, sta); + return; } if (sband->band == IEEE80211_BAND_5GHZ) i -= IWL_FIRST_OFDM_RATE; sel->rate_idx = i; -out: - rcu_read_unlock(); } -static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) +static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, + gfp_t gfp) { struct iwl_lq_sta *lq_sta; struct iwl_priv *priv; @@ -2163,33 +2182,28 @@ static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) return lq_sta; } -static void rs_rate_init(void *priv_rate, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) +static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) { int i, j; - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_supported_band *sband; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct iwl_priv *priv = (struct iwl_priv *)priv_r; + struct ieee80211_conf *conf = &priv->hw->conf; struct iwl_lq_sta *lq_sta = priv_sta; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - lq_sta->flush_timer = 0; lq_sta->supp_rates = sta->supp_rates[sband->band]; - sta->txrate_idx = 3; for (j = 0; j < LQ_SIZE; j++) for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); - IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); + IWL_DEBUG_RATE("LQ: *** rate scale station global init ***\n"); /* TODO: what is a good starting rate for STA? About middle? Maybe not * the lowest or the highest rate.. Could consider using RSSI from * previous packets? Need to have IEEE 802.1X auth succeed immediately * after assoc.. */ lq_sta->ibss_sta_added = 0; - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode == NL80211_IFTYPE_AP) { u8 sta_id = iwl_find_station(priv, sta->addr); DECLARE_MAC_BUF(mac); @@ -2212,15 +2226,14 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, } /* Find highest tx rate supported by hardware and destination station */ + lq_sta->last_txrate_idx = 3; for (i = 0; i < sband->n_bitrates; i++) if (sta->supp_rates[sband->band] & BIT(i)) - sta->txrate_idx = i; + lq_sta->last_txrate_idx = i; - sta->last_txrate_idx = sta->txrate_idx; - /* WTF is with this bogus comment? A doesn't have cck rates */ - /* For MODE_IEEE80211A, cck rates are at end of rate table */ - if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) - sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; + /* For MODE_IEEE80211A, skip over cck rates in global rate table */ + if (sband->band == IEEE80211_BAND_5GHZ) + lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; lq_sta->is_dup = 0; lq_sta->is_green = rs_use_green(priv, conf); @@ -2260,7 +2273,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; lq_sta->drv = priv; - rs_initialize_lq(priv, conf, sta); + rs_initialize_lq(priv, conf, sta, lq_sta); } static void rs_fill_link_cmd(const struct iwl_priv *priv, @@ -2382,9 +2395,9 @@ static void rs_fill_link_cmd(const struct iwl_priv *priv, lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); } -static void *rs_alloc(struct ieee80211_local *local) +static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { - return local->hw.priv; + return hw->priv; } /* rate scale requires free function to be implemented */ static void rs_free(void *priv_rate) @@ -2405,12 +2418,12 @@ static void rs_clear(void *priv_rate) #endif /* CONFIG_IWLWIFI_DEBUG */ } -static void rs_free_sta(void *priv_rate, void *priv_sta) +static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta, + void *priv_sta) { struct iwl_lq_sta *lq_sta = priv_sta; - struct iwl_priv *priv; + struct iwl_priv *priv = priv_r; - priv = (struct iwl_priv *)priv_rate; IWL_DEBUG_RATE("enter\n"); kfree(lq_sta); IWL_DEBUG_RATE("leave\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h index 84d4d1e3375..d148d73635e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -206,21 +206,28 @@ enum { #define IWL_RATE_DECREASE_TH 1920 /* 15% */ /* possible actions when in legacy mode */ -#define IWL_LEGACY_SWITCH_ANTENNA 0 -#define IWL_LEGACY_SWITCH_SISO 1 -#define IWL_LEGACY_SWITCH_MIMO2 2 +#define IWL_LEGACY_SWITCH_ANTENNA1 0 +#define IWL_LEGACY_SWITCH_ANTENNA2 1 +#define IWL_LEGACY_SWITCH_SISO 2 +#define IWL_LEGACY_SWITCH_MIMO2_AB 3 +#define IWL_LEGACY_SWITCH_MIMO2_AC 4 +#define IWL_LEGACY_SWITCH_MIMO2_BC 5 /* possible actions when in siso mode */ -#define IWL_SISO_SWITCH_ANTENNA 0 -#define IWL_SISO_SWITCH_MIMO2 1 -#define IWL_SISO_SWITCH_GI 2 +#define IWL_SISO_SWITCH_ANTENNA1 0 +#define IWL_SISO_SWITCH_ANTENNA2 1 +#define IWL_SISO_SWITCH_MIMO2_AB 2 +#define IWL_SISO_SWITCH_MIMO2_AC 3 +#define IWL_SISO_SWITCH_MIMO2_BC 4 +#define IWL_SISO_SWITCH_GI 5 /* possible actions when in mimo mode */ -#define IWL_MIMO_SWITCH_ANTENNA_A 0 -#define IWL_MIMO_SWITCH_ANTENNA_B 1 -#define IWL_MIMO_SWITCH_GI 2 - -/*FIXME:RS:separate MIMO2/3 transitions*/ +#define IWL_MIMO2_SWITCH_ANTENNA1 0 +#define IWL_MIMO2_SWITCH_ANTENNA2 1 +#define IWL_MIMO2_SWITCH_SISO_A 2 +#define IWL_MIMO2_SWITCH_SISO_B 3 +#define IWL_MIMO2_SWITCH_SISO_C 4 +#define IWL_MIMO2_SWITCH_GI 5 /*FIXME:RS:add posible acctions for MIMO3*/ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index e01f048a02d..24a1aeb6448 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -337,7 +337,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) /* If we have set the ASSOC_MSK and we are in BSS mode then * add the IWL_AP_ID to the station rate table */ if (new_assoc) { - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + if (priv->iw_mode == NL80211_IFTYPE_STATION) { ret = iwl_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1); if (ret == IWL_INVALID_STATION) { @@ -448,8 +448,8 @@ static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, const u8 *dest, int left) { if (!iwl_is_associated(priv) || !priv->ibss_beacon || - ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && - (priv->iw_mode != IEEE80211_IF_TYPE_AP))) + ((priv->iw_mode != NL80211_IFTYPE_ADHOC) && + (priv->iw_mode != NL80211_IFTYPE_AP))) return 0; if (priv->ibss_beacon->len > left) @@ -485,7 +485,7 @@ static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) return IWL_RATE_6M_PLCP; } -unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, +static unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, struct iwl_frame *frame, u8 rate) { struct iwl_tx_beacon_cmd *tx_beacon_cmd; @@ -564,8 +564,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, if (!iwl_conf->is_ht) return; - priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) iwl_conf->sgf |= HT_SHORT_GI_20MHZ; if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) @@ -586,6 +584,8 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, iwl_conf->supported_chan_width = 0; } + iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2); + memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); iwl_conf->control_channel = ht_bss_conf->primary_channel; @@ -672,7 +672,7 @@ static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) beacon_int = priv->beacon_int; spin_unlock_irqrestore(&priv->lock, flags); - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + if (priv->iw_mode == NL80211_IFTYPE_STATION) { if (beacon_int == 0) { priv->rxon_timing.beacon_interval = cpu_to_le16(100); priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); @@ -721,7 +721,7 @@ static void iwl_set_flags_for_band(struct iwl_priv *priv, else priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; @@ -740,23 +740,23 @@ static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_AP: priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; break; - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | RXON_FILTER_ACCEPT_GRP_MSK; break; - case IEEE80211_IF_TYPE_MNTR: + case NL80211_IFTYPE_MONITOR: priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; @@ -785,7 +785,7 @@ static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) * in some case A channels are all non IBSS * in this case force B/G channel */ - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !(is_channel_ibss(ch_info))) ch_info = &priv->channel_info[0]; @@ -1182,7 +1182,7 @@ static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, le32_to_cpu(beacon->low_tsf), rate); #endif - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + if ((priv->iw_mode == NL80211_IFTYPE_AP) && (!test_bit(STATUS_EXIT_PENDING, &priv->status))) queue_work(priv->workqueue, &priv->beacon_update); } @@ -1270,7 +1270,7 @@ int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) if (src == IWL_PWR_SRC_VAUX) { u32 val; - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, + ret = pci_read_config_dword(priv->pci_dev, PCI_CFG_POWER_SOURCE, &val); if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) @@ -2388,7 +2388,7 @@ static void iwl4965_bg_set_monitor(struct work_struct *work) mutex_lock(&priv->mutex); - ret = iwl4965_set_mode(priv, IEEE80211_IF_TYPE_MNTR); + ret = iwl4965_set_mode(priv, NL80211_IFTYPE_MONITOR); if (ret) { if (ret == -EAGAIN) @@ -2469,7 +2469,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) DECLARE_MAC_BUF(mac); unsigned long flags; - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode == NL80211_IFTYPE_AP) { IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -2486,6 +2486,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) if (!priv->vif || !priv->is_open) return; + iwl_power_cancel_timeout(priv); iwl_scan_cancel_timeout(priv, 200); conf = ieee80211_get_hw_conf(priv->hw); @@ -2503,8 +2504,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; - if (priv->current_ht_config.is_ht) - iwl_set_rxon_ht(priv, &priv->current_ht_config); + iwl_set_rxon_ht(priv, &priv->current_ht_config); iwl_set_rxon_chain(priv); priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); @@ -2523,7 +2523,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) else priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; } @@ -2531,10 +2531,10 @@ static void iwl4965_post_associate(struct iwl_priv *priv) iwl4965_commit_rxon(priv); switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: /* assume default assoc id */ priv->assoc_id = 1; @@ -2550,44 +2550,23 @@ static void iwl4965_post_associate(struct iwl_priv *priv) break; } - /* Enable Rx differential gain and sensitivity calibrations */ - iwl_chain_noise_reset(priv); - priv->start_calib = 1; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->assoc_station_added = 1; spin_lock_irqsave(&priv->lock, flags); iwl_activate_qos(priv, 0); spin_unlock_irqrestore(&priv->lock, flags); - iwl_power_update_mode(priv, 0); - /* we have just associated, don't start scan too early */ - priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; -} - -static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); - -static void iwl_bg_scan_completed(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, scan_completed); - - IWL_DEBUG_SCAN("SCAN complete scan\n"); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_bit(STATUS_CONF_PENDING, &priv->status)) - iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw)); + /* the chain noise calibration will enabled PM upon completion + * If chain noise has already been run, then we need to enable + * power management here */ + if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) + iwl_power_enable_management(priv); - ieee80211_scan_completed(priv->hw); + /* Enable Rx differential gain and sensitivity calibrations */ + iwl_chain_noise_reset(priv); + priv->start_calib = 1; - /* Since setting the TXPOWER may have been deferred while - * performing the scan, fire one off */ - mutex_lock(&priv->mutex); - iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); - mutex_unlock(&priv->mutex); } /***************************************************************************** @@ -2728,12 +2707,6 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) IWL_DEBUG_MACDUMP("enter\n"); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); @@ -2798,8 +2771,6 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); - if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); goto out; @@ -2817,7 +2788,6 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co if (unlikely(!priv->cfg->mod_params->disable_hw_scan && test_bit(STATUS_SCANNING, &priv->status))) { IWL_DEBUG_MAC80211("leave - scanning\n"); - set_bit(STATUS_CONF_PENDING, &priv->status); mutex_unlock(&priv->mutex); return 0; } @@ -2830,7 +2800,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co goto out; } - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + if (priv->iw_mode == NL80211_IFTYPE_ADHOC && !is_channel_ibss(ch_info)) { IWL_ERROR("channel %d in band %d not IBSS channel\n", conf->channel->hw_value, conf->channel->band); @@ -2851,7 +2821,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co ) priv->staging_rxon.flags = 0; - iwl_set_rxon_channel(priv, conf->channel->band, channel); + iwl_set_rxon_channel(priv, conf->channel); iwl_set_flags_for_band(priv, conf->channel->band); @@ -2880,6 +2850,13 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co goto out; } + if (conf->flags & IEEE80211_CONF_PS) + ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3); + else + ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM); + if (ret) + IWL_DEBUG_MAC80211("Error setting power level\n"); + IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n", priv->tx_power_user_lmt, conf->power_level); @@ -2896,7 +2873,6 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co IWL_DEBUG_MAC80211("leave\n"); out: - clear_bit(STATUS_CONF_PENDING, &priv->status); mutex_unlock(&priv->mutex); return ret; } @@ -2945,7 +2921,7 @@ static void iwl4965_config_ap(struct iwl_priv *priv) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; } @@ -2984,7 +2960,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, return 0; } - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + if (priv->iw_mode == NL80211_IFTYPE_ADHOC && conf->changed & IEEE80211_IFCC_BEACON) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); if (!beacon) @@ -2994,7 +2970,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, return rc; } - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + if ((priv->iw_mode == NL80211_IFTYPE_AP) && (!conf->ssid_len)) { IWL_DEBUG_MAC80211 ("Leaving in AP mode because HostAPD is not ready.\n"); @@ -3017,7 +2993,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { */ - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode == NL80211_IFTYPE_AP) { if (!conf->bssid) { conf->bssid = priv->mac_addr; memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); @@ -3052,11 +3028,11 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, * to verify) - jpk */ memcpy(priv->bssid, conf->bssid, ETH_ALEN); - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + if (priv->iw_mode == NL80211_IFTYPE_AP) iwl4965_config_ap(priv); else { rc = iwl4965_commit_rxon(priv); - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) + if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc) iwl_rxon_add_station( priv, priv->active_rxon.bssid_addr, 1); } @@ -3092,7 +3068,7 @@ static void iwl4965_configure_filter(struct ieee80211_hw *hw, if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", - IEEE80211_IF_TYPE_MNTR, + NL80211_IFTYPE_MONITOR, changed_flags, *total_flags); /* queue work 'cuz mac80211 is holding a lock which * prevents us from issuing (synchronous) f/w cmds */ @@ -3173,6 +3149,10 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, priv->power_data.dtim_period = bss_conf->dtim_period; priv->timestamp = bss_conf->timestamp; priv->assoc_capability = bss_conf->assoc_capability; + + /* we have just associated, don't start scan too early + * leave time for EAPOL exchange to complete + */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; mutex_lock(&priv->mutex); @@ -3189,11 +3169,11 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, } -static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) +static int iwl_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t ssid_len) { - int rc = 0; unsigned long flags; struct iwl_priv *priv = hw->priv; + int ret; IWL_DEBUG_MAC80211("enter\n"); @@ -3201,41 +3181,47 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) spin_lock_irqsave(&priv->lock, flags); if (!iwl_is_ready_rf(priv)) { - rc = -EIO; + ret = -EIO; IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); goto out_unlock; } - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ - rc = -EIO; + if (priv->iw_mode == NL80211_IFTYPE_AP) { /* APs don't scan */ + ret = -EIO; IWL_ERROR("ERROR: APs don't scan\n"); goto out_unlock; } - /* we don't schedule scan within next_scan_jiffies period */ + /* We don't schedule scan within next_scan_jiffies period. + * Avoid scanning during possible EAPOL exchange, return + * success immediately. + */ if (priv->next_scan_jiffies && - time_after(priv->next_scan_jiffies, jiffies)) { - rc = -EAGAIN; + time_after(priv->next_scan_jiffies, jiffies)) { + IWL_DEBUG_SCAN("scan rejected: within next scan period\n"); + queue_work(priv->workqueue, &priv->scan_completed); + ret = 0; goto out_unlock; } + /* if we just finished scan ask for delay */ - if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies + - IWL_DELAY_NEXT_SCAN, jiffies)) { - rc = -EAGAIN; + if (iwl_is_associated(priv) && priv->last_scan_jiffies && + time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) { + IWL_DEBUG_SCAN("scan rejected: within previous scan period\n"); + queue_work(priv->workqueue, &priv->scan_completed); + ret = 0; goto out_unlock; } - if (len) { - IWL_DEBUG_SCAN("direct scan for %s [%d]\n ", - iwl_escape_essid(ssid, len), (int)len); + if (ssid_len) { priv->one_direct_scan = 1; - priv->direct_ssid_len = (u8) - min((u8) len, (u8) IW_ESSID_MAX_SIZE); + priv->direct_ssid_len = min_t(u8, ssid_len, IW_ESSID_MAX_SIZE); memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); - } else + } else { priv->one_direct_scan = 0; + } - rc = iwl_scan_initiate(priv); + ret = iwl_scan_initiate(priv); IWL_DEBUG_MAC80211("leave\n"); @@ -3243,7 +3229,7 @@ out_unlock: spin_unlock_irqrestore(&priv->lock, flags); mutex_unlock(&priv->mutex); - return rc; + return ret; } static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, @@ -3332,7 +3318,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, * in 1X mode. * In legacy wep mode, we use another host command to the uCode */ if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id && - priv->iw_mode != IEEE80211_IF_TYPE_AP) { + priv->iw_mode != NL80211_IFTYPE_AP) { if (cmd == SET_KEY) is_default_wep_key = !priv->key_mapping_key; else @@ -3403,7 +3389,7 @@ static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; priv->qos_data.qos_active = 1; - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + if (priv->iw_mode == NL80211_IFTYPE_AP) iwl_activate_qos(priv, 1); else if (priv->assoc_id && iwl_is_associated(priv)) iwl_activate_qos(priv, 0); @@ -3416,13 +3402,13 @@ static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn) + struct ieee80211_sta *sta, u16 tid, u16 *ssn) { struct iwl_priv *priv = hw->priv; DECLARE_MAC_BUF(mac); IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", - print_mac(mac, addr), tid); + print_mac(mac, sta->addr), tid); if (!(priv->cfg->sku & IWL_SKU_N)) return -EACCES; @@ -3430,16 +3416,16 @@ static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_RX_START: IWL_DEBUG_HT("start Rx\n"); - return iwl_rx_agg_start(priv, addr, tid, *ssn); + return iwl_rx_agg_start(priv, sta->addr, tid, *ssn); case IEEE80211_AMPDU_RX_STOP: IWL_DEBUG_HT("stop Rx\n"); - return iwl_rx_agg_stop(priv, addr, tid); + return iwl_rx_agg_stop(priv, sta->addr, tid); case IEEE80211_AMPDU_TX_START: IWL_DEBUG_HT("start Tx\n"); - return iwl_tx_agg_start(priv, addr, tid, ssn); + return iwl_tx_agg_start(priv, sta->addr, tid, ssn); case IEEE80211_AMPDU_TX_STOP: IWL_DEBUG_HT("stop Tx\n"); - return iwl_tx_agg_stop(priv, addr, tid); + return iwl_tx_agg_stop(priv, sta->addr, tid); default: IWL_DEBUG_HT("unknown\n"); return -EINVAL; @@ -3521,7 +3507,7 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) priv->beacon_int = priv->hw->conf.beacon_int; priv->timestamp = 0; - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) + if ((priv->iw_mode == NL80211_IFTYPE_STATION)) priv->beacon_int = 0; spin_unlock_irqrestore(&priv->lock, flags); @@ -3535,7 +3521,7 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) /* we are restarting association process * clear RXON_FILTER_ASSOC_MSK bit */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode != NL80211_IFTYPE_AP) { iwl_scan_cancel_timeout(priv, 100); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl4965_commit_rxon(priv); @@ -3544,7 +3530,17 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) iwl_power_update_mode(priv, 0); /* Per mac80211.h: This is only used in IBSS mode... */ - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { + + /* switch to CAM during association period. + * the ucode will block any association/authentication + * frome during assiciation period if it can not hear + * the AP because of PM. the timer enable PM back is + * association do not complete + */ + if (priv->hw->conf.channel->flags & (IEEE80211_CHAN_PASSIVE_SCAN | + IEEE80211_CHAN_RADAR)) + iwl_power_disable_management(priv, 3000); IWL_DEBUG_MAC80211("leave - not in IBSS\n"); mutex_unlock(&priv->mutex); @@ -3573,7 +3569,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk return -EIO; } - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { IWL_DEBUG_MAC80211("leave - not IBSS\n"); mutex_unlock(&priv->mutex); return -EIO; @@ -3630,11 +3626,11 @@ static ssize_t store_debug_level(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = d->driver_data; - char *p = (char *)buf; - u32 val; + unsigned long val; + int ret; - val = simple_strtoul(p, &p, 0); - if (p == buf) + ret = strict_strtoul(buf, 0, &val); + if (ret) printk(KERN_INFO DRV_NAME ": %s is not in hex or decimal form.\n", buf); else @@ -3706,11 +3702,11 @@ static ssize_t store_tx_power(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - char *p = (char *)buf; - u32 val; + unsigned long val; + int ret; - val = simple_strtoul(p, &p, 10); - if (p == buf) + ret = strict_strtoul(buf, 10, &val); + if (ret) printk(KERN_INFO DRV_NAME ": %s is not in decimal form.\n", buf); else @@ -3734,7 +3730,12 @@ static ssize_t store_flags(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 flags = simple_strtoul(buf, NULL, 0); + unsigned long val; + u32 flags; + int ret = strict_strtoul(buf, 0, &val); + if (ret) + return ret; + flags = (u32)val; mutex_lock(&priv->mutex); if (le32_to_cpu(priv->staging_rxon.flags) != flags) { @@ -3742,8 +3743,7 @@ static ssize_t store_flags(struct device *d, if (iwl_scan_cancel_timeout(priv, 100)) IWL_WARNING("Could not cancel scan.\n"); else { - IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", - flags); + IWL_DEBUG_INFO("Commit rxon.flags = 0x%04X\n", flags); priv->staging_rxon.flags = cpu_to_le32(flags); iwl4965_commit_rxon(priv); } @@ -3769,7 +3769,12 @@ static ssize_t store_filter_flags(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 filter_flags = simple_strtoul(buf, NULL, 0); + unsigned long val; + u32 filter_flags; + int ret = strict_strtoul(buf, 0, &val); + if (ret) + return ret; + filter_flags = (u32)val; mutex_lock(&priv->mutex); if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { @@ -3870,10 +3875,12 @@ static ssize_t store_retry_rate(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = dev_get_drvdata(d); + long val; + int ret = strict_strtol(buf, 10, &val); + if (!ret) + return ret; - priv->retry_rate = simple_strtoul(buf, NULL, 0); - if (priv->retry_rate <= 0) - priv->retry_rate = 1; + priv->retry_rate = (val > 0) ? val : 1; return count; } @@ -3894,9 +3901,9 @@ static ssize_t store_power_level(struct device *d, { struct iwl_priv *priv = dev_get_drvdata(d); int ret; - int mode; + unsigned long mode; + - mode = simple_strtoul(buf, NULL, 0); mutex_lock(&priv->mutex); if (!iwl_is_ready(priv)) { @@ -3904,6 +3911,10 @@ static ssize_t store_power_level(struct device *d, goto out; } + ret = strict_strtoul(buf, 10, &mode); + if (ret) + goto out; + ret = iwl_power_set_user_mode(priv, mode); if (ret) { IWL_DEBUG_MAC80211("failed setting power mode.\n"); @@ -4080,9 +4091,8 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); - /* FIXME : remove when resolved PENDING */ - INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); iwl_setup_scan_deferred_work(priv); + iwl_setup_power_deferred_work(priv); if (priv->cfg->ops->lib->setup_deferred_work) priv->cfg->ops->lib->setup_deferred_work(priv); @@ -4102,6 +4112,7 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv) cancel_delayed_work_sync(&priv->init_alive_start); cancel_delayed_work(&priv->scan_check); + cancel_delayed_work_sync(&priv->set_power_save); cancel_delayed_work(&priv->alive_start); cancel_work_sync(&priv->beacon_update); del_timer_sync(&priv->statistics_periodic); @@ -4150,7 +4161,7 @@ static struct ieee80211_ops iwl4965_hw_ops = { .reset_tsf = iwl4965_mac_reset_tsf, .bss_info_changed = iwl4965_bss_info_changed, .ampdu_action = iwl4965_mac_ampdu_action, - .hw_scan = iwl4965_mac_hw_scan + .hw_scan = iwl_mac_hw_scan }; static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -4204,13 +4215,13 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_master(pdev); - err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); /* both attempts failed: */ if (err) { printk(KERN_WARNING "%s: No suitable DMA available.\n", @@ -4225,9 +4236,6 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_drvdata(pdev, priv); - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); /*********************** * 3. Read REV register @@ -4247,6 +4255,10 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", priv->cfg->name, priv->hw_rev); + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + /* amp init */ err = priv->cfg->ops->lib->apm_ops.init(priv); if (err < 0) { @@ -4481,7 +4493,10 @@ static struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)}, {IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)}, {IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)}, - {IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)}, +/* 5350 WiFi/WiMax */ + {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, + {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, + {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, #endif /* CONFIG_IWL5000 */ {0} }; diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c index ef49440bd7f..72fbf47229d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -66,6 +66,66 @@ #include "iwl-core.h" #include "iwl-calib.h" +/***************************************************************************** + * INIT calibrations framework + *****************************************************************************/ + + int iwl_send_calib_results(struct iwl_priv *priv) +{ + int ret = 0; + int i = 0; + + struct iwl_host_cmd hcmd = { + .id = REPLY_PHY_CALIBRATION_CMD, + .meta.flags = CMD_SIZE_HUGE, + }; + + for (i = 0; i < IWL_CALIB_MAX; i++) + if (priv->calib_results[i].buf) { + hcmd.len = priv->calib_results[i].buf_len; + hcmd.data = priv->calib_results[i].buf; + ret = iwl_send_cmd_sync(priv, &hcmd); + if (ret) + goto err; + } + + return 0; +err: + IWL_ERROR("Error %d iteration %d\n", ret, i); + return ret; +} +EXPORT_SYMBOL(iwl_send_calib_results); + +int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len) +{ + if (res->buf_len != len) { + kfree(res->buf); + res->buf = kzalloc(len, GFP_ATOMIC); + } + if (unlikely(res->buf == NULL)) + return -ENOMEM; + + res->buf_len = len; + memcpy(res->buf, buf, len); + return 0; +} +EXPORT_SYMBOL(iwl_calib_set); + +void iwl_calib_free_results(struct iwl_priv *priv) +{ + int i; + + for (i = 0; i < IWL_CALIB_MAX; i++) { + kfree(priv->calib_results[i].buf); + priv->calib_results[i].buf = NULL; + priv->calib_results[i].buf_len = 0; + } +} + +/***************************************************************************** + * RUNTIME calibrations framework + *****************************************************************************/ + /* "false alarms" are signals that our DSP tries to lock onto, * but then determines that they are either noise, or transmissions * from a distant wireless network (also "noise", really) that get @@ -748,13 +808,11 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, } } + /* Save for use within RXON, TX, SCAN commands, etc. */ + priv->chain_noise_data.active_chains = active_chains; IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n", active_chains); - /* Save for use within RXON, TX, SCAN commands, etc. */ - /*priv->valid_antenna = active_chains;*/ - /*FIXME: should be reflected in RX chains in RXON */ - /* Analyze noise for rx balance */ average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS); average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS); @@ -779,6 +837,15 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, priv->cfg->ops->utils->gain_computation(priv, average_noise, min_average_noise_antenna_i, min_average_noise); + + /* Some power changes may have been made during the calibration. + * Update and commit the RXON + */ + if (priv->cfg->ops->lib->update_chain_flags) + priv->cfg->ops->lib->update_chain_flags(priv); + + data->state = IWL_CHAIN_NOISE_DONE; + iwl_power_enable_management(priv); } EXPORT_SYMBOL(iwl_chain_noise_calibration); diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 28b5b09996e..8d04e966ad4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -163,6 +163,13 @@ enum { /* iwl_cmd_header flags value */ #define IWL_CMD_FAILED_MSK 0x40 +#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) +#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) +#define SEQ_TO_INDEX(s) ((s) & 0xff) +#define INDEX_TO_SEQ(i) ((i) & 0xff) +#define SEQ_HUGE_FRAME __constant_cpu_to_le16(0x4000) +#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) + /** * struct iwl_cmd_header * @@ -171,7 +178,7 @@ enum { */ struct iwl_cmd_header { u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 flags; /* IWL_CMD_* */ + u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ /* * The driver sets up the sequence number to values of its chosing. * uCode does not use this value, but passes it back to the driver @@ -187,11 +194,12 @@ struct iwl_cmd_header { * * The Linux driver uses the following format: * - * 0:7 index/position within Tx queue - * 8:13 Tx queue selection - * 14:14 driver sets this to indicate command is in the 'huge' - * storage at the end of the command buffers, i.e. scan cmd - * 15:15 uCode sets this in uCode-originated response/notification + * 0:7 tfd index - position within TX queue + * 8:12 TX queue id + * 13 reserved + * 14 huge - driver sets this to indicate command is in the + * 'huge' storage at the end of the command buffers + * 15 unsolicited RX or uCode-originated notification */ __le16 sequence; @@ -2026,8 +2034,8 @@ struct iwl4965_spectrum_notification { * bit 2 - '0' PM have to walk up every DTIM * '1' PM could sleep over DTIM till listen Interval. * PCI power managed - * bit 3 - '0' (PCI_LINK_CTRL & 0x1) - * '1' !(PCI_LINK_CTRL & 0x1) + * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) + * '1' !(PCI_CFG_LINK_CTRL & 0x1) * Force sleep Modes * bit 31/30- '00' use both mac/xtal sleeps * '01' force Mac sleep diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 80f2f84defa..4c312c55f90 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -306,14 +306,14 @@ void iwl_reset_qos(struct iwl_priv *priv) spin_lock_irqsave(&priv->lock, flags); priv->qos_data.qos_active = 0; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) { + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) { if (priv->qos_data.qos_enable) priv->qos_data.qos_active = 1; if (!(priv->active_rate & 0xfff0)) { cw_min = 31; is_legacy = 1; } - } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + } else if (priv->iw_mode == NL80211_IFTYPE_AP) { if (priv->qos_data.qos_enable) priv->qos_data.qos_active = 1; } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) { @@ -399,8 +399,8 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; - ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & - (IWL_MIMO_PS_NONE << 2)); + ht_info->cap |= (u16)(IEEE80211_HT_CAP_SM_PS & + (WLAN_HT_CAP_SM_PS_DISABLED << 2)); max_bit_rate = MAX_BIT_RATE_20_MHZ; if (priv->hw_params.fat_channel & BIT(band)) { @@ -646,8 +646,14 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) struct iwl_rxon_cmd *rxon = &priv->staging_rxon; u32 val; - if (!ht_info->is_ht) + if (!ht_info->is_ht) { + rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | + RXON_FLG_CHANNEL_MODE_PURE_40_MSK | + RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | + RXON_FLG_FAT_PROT_MSK | + RXON_FLG_HT_PROT_MSK); return; + } /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */ if (iwl_is_fat_tx_allowed(priv, NULL)) @@ -697,8 +703,12 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) } EXPORT_SYMBOL(iwl_set_rxon_ht); -/* - * Determine how many receiver/antenna chains to use. +#define IWL_NUM_RX_CHAINS_MULTIPLE 3 +#define IWL_NUM_RX_CHAINS_SINGLE 2 +#define IWL_NUM_IDLE_CHAINS_DUAL 2 +#define IWL_NUM_IDLE_CHAINS_SINGLE 1 + +/* Determine how many receiver/antenna chains to use. * More provides better reception via diversity. Fewer saves power. * MIMO (dual stream) requires at least 2, but works better with 3. * This does not determine *which* chains to use, just how many. @@ -709,10 +719,11 @@ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # of Rx chains to use when expecting MIMO. */ - if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - return 2; + if (is_single || (!is_cam && (priv->current_ht_config.sm_ps == + WLAN_HT_CAP_SM_PS_STATIC))) + return IWL_NUM_RX_CHAINS_SINGLE; else - return 3; + return IWL_NUM_RX_CHAINS_MULTIPLE; } static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) @@ -720,17 +731,19 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) int idle_cnt; bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # Rx chains when idling and maybe trying to save power */ - switch (priv->ps_mode) { - case IWL_MIMO_PS_STATIC: - case IWL_MIMO_PS_DYNAMIC: - idle_cnt = (is_cam) ? 2 : 1; + switch (priv->current_ht_config.sm_ps) { + case WLAN_HT_CAP_SM_PS_STATIC: + case WLAN_HT_CAP_SM_PS_DYNAMIC: + idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL : + IWL_NUM_IDLE_CHAINS_SINGLE; break; - case IWL_MIMO_PS_NONE: - idle_cnt = (is_cam) ? active_cnt : 1; + case WLAN_HT_CAP_SM_PS_DISABLED: + idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE; break; - case IWL_MIMO_PS_INVALID: + case WLAN_HT_CAP_SM_PS_INVALID: default: - IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); + IWL_ERROR("invalide mimo ps mode %d\n", + priv->current_ht_config.sm_ps); WARN_ON(1); idle_cnt = -1; break; @@ -738,6 +751,17 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) return idle_cnt; } +/* up to 4 chains */ +static u8 iwl_count_chain_bitmap(u32 chain_bitmap) +{ + u8 res; + res = (chain_bitmap & BIT(0)) >> 0; + res += (chain_bitmap & BIT(1)) >> 1; + res += (chain_bitmap & BIT(2)) >> 2; + res += (chain_bitmap & BIT(4)) >> 4; + return res; +} + /** * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image * @@ -748,37 +772,47 @@ void iwl_set_rxon_chain(struct iwl_priv *priv) { bool is_single = is_single_rx_stream(priv); bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); - u8 idle_rx_cnt, active_rx_cnt; + u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; + u32 active_chains; u16 rx_chain; /* Tell uCode which antennas are actually connected. * Before first association, we assume all antennas are connected. * Just after first association, iwl_chain_noise_calibration() * checks which antennas actually *are* connected. */ - rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; + if (priv->chain_noise_data.active_chains) + active_chains = priv->chain_noise_data.active_chains; + else + active_chains = priv->hw_params.valid_rx_ant; + + rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; /* How many receivers should we use? */ active_rx_cnt = iwl_get_active_rx_chain_count(priv); idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); - /* correct rx chain count accoridng hw settings */ - if (priv->hw_params.rx_chains_num < active_rx_cnt) - active_rx_cnt = priv->hw_params.rx_chains_num; - if (priv->hw_params.rx_chains_num < idle_rx_cnt) - idle_rx_cnt = priv->hw_params.rx_chains_num; + /* correct rx chain count according hw settings + * and chain noise calibration + */ + valid_rx_cnt = iwl_count_chain_bitmap(active_chains); + if (valid_rx_cnt < active_rx_cnt) + active_rx_cnt = valid_rx_cnt; + + if (valid_rx_cnt < idle_rx_cnt) + idle_rx_cnt = valid_rx_cnt; rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); - if (!is_single && (active_rx_cnt >= 2) && is_cam) + if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; else priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n", + IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n", priv->staging_rxon.rx_chain, active_rx_cnt, idle_rx_cnt); @@ -788,7 +822,7 @@ void iwl_set_rxon_chain(struct iwl_priv *priv) EXPORT_SYMBOL(iwl_set_rxon_chain); /** - * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON + * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz * @channel: Any channel valid for the requested phymode @@ -797,10 +831,11 @@ EXPORT_SYMBOL(iwl_set_rxon_chain); * NOTE: Does not commit to the hardware; it sets appropriate bit fields * in the staging RXON flag structure based on the phymode */ -int iwl_set_rxon_channel(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel) +int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch) { + enum ieee80211_band band = ch->band; + u16 channel = ieee80211_frequency_to_channel(ch->center_freq); + if (!iwl_get_channel_info(priv, band, channel)) { IWL_DEBUG_INFO("Could not set channel to %d [%d]\n", channel, band); @@ -834,6 +869,10 @@ int iwl_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; /* queues to support 11n aggregation */ @@ -891,7 +930,6 @@ int iwl_init_drv(struct iwl_priv *priv) spin_lock_init(&priv->power_data.lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); - spin_lock_init(&priv->lq_mngr.lock); INIT_LIST_HEAD(&priv->free_frames); @@ -905,10 +943,10 @@ int iwl_init_drv(struct iwl_priv *priv) priv->ieee_rates = NULL; priv->band = IEEE80211_BAND_2GHZ; - priv->iw_mode = IEEE80211_IF_TYPE_STA; + priv->iw_mode = NL80211_IFTYPE_STATION; priv->use_ant_b_for_management_frame = 1; /* start with ant B */ - priv->ps_mode = IWL_MIMO_PS_NONE; + priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED; /* Choose which receivers/antennas to use */ iwl_set_rxon_chain(priv); @@ -922,8 +960,6 @@ int iwl_init_drv(struct iwl_priv *priv) priv->qos_data.qos_active = 0; priv->qos_data.qos_cap.val = 0; - iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); - priv->rates_mask = IWL_RATES_MASK; /* If power management is turned on, default to AC mode */ priv->power_mode = IWL_POWER_AC; @@ -950,22 +986,6 @@ err: } EXPORT_SYMBOL(iwl_init_drv); -void iwl_free_calib_results(struct iwl_priv *priv) -{ - kfree(priv->calib_results.lo_res); - priv->calib_results.lo_res = NULL; - priv->calib_results.lo_res_len = 0; - - kfree(priv->calib_results.tx_iq_res); - priv->calib_results.tx_iq_res = NULL; - priv->calib_results.tx_iq_res_len = 0; - - kfree(priv->calib_results.tx_iq_perd_res); - priv->calib_results.tx_iq_perd_res = NULL; - priv->calib_results.tx_iq_perd_res_len = 0; -} -EXPORT_SYMBOL(iwl_free_calib_results); - int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) { int ret = 0; @@ -993,10 +1013,9 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) } EXPORT_SYMBOL(iwl_set_tx_power); - void iwl_uninit_drv(struct iwl_priv *priv) { - iwl_free_calib_results(priv); + iwl_calib_free_results(priv); iwlcore_free_geos(priv); iwl_free_channel_map(priv); kfree(priv->scan); @@ -1150,7 +1169,6 @@ int iwl_verify_ucode(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_verify_ucode); - static const char *desc_lookup(int i) { switch (i) { @@ -1231,9 +1249,9 @@ EXPORT_SYMBOL(iwl_dump_nic_error_log); /** * iwl_print_event_log - Dump error event log to syslog * - * NOTE: Must be called with iwl4965_grab_nic_access() already obtained! + * NOTE: Must be called with iwl_grab_nic_access() already obtained! */ -void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, +static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, u32 num_events, u32 mode) { u32 i; @@ -1274,8 +1292,6 @@ void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, } } } -EXPORT_SYMBOL(iwl_print_event_log); - void iwl_dump_nic_event_log(struct iwl_priv *priv) { @@ -1391,7 +1407,7 @@ void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv) iwl_scan_cancel(priv); /* FIXME: This is a workaround for AP */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode != NL80211_IFTYPE_AP) { spin_lock_irqsave(&priv->lock, flags); iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_SW_BIT_RFKILL); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 64f139e9744..288b6a800e0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -184,14 +184,10 @@ struct iwl_cfg { struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, struct ieee80211_ops *hw_ops); void iwl_hw_detect(struct iwl_priv *priv); - void iwl_clear_stations_table(struct iwl_priv *priv); -void iwl_free_calib_results(struct iwl_priv *priv); void iwl_reset_qos(struct iwl_priv *priv); void iwl_set_rxon_chain(struct iwl_priv *priv); -int iwl_set_rxon_channel(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel); +int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch); void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info); u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, struct ieee80211_ht_info *sta_ht_inf); @@ -218,7 +214,6 @@ void iwl_rx_replenish(struct iwl_priv *priv); int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq); int iwl_rx_agg_start(struct iwl_priv *priv, const u8 *addr, int tid, u16 ssn); int iwl_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid); -/* FIXME: remove when TX is moved to iwl core */ int iwl_rx_queue_restock(struct iwl_priv *priv); int iwl_rx_queue_space(const struct iwl_rx_queue *q); void iwl_rx_allocate(struct iwl_priv *priv); @@ -237,11 +232,7 @@ void iwl_rx_statistics(struct iwl_priv *priv, ******************************************************/ int iwl_txq_ctx_reset(struct iwl_priv *priv); int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb); -/* FIXME: remove when free Tx is fully merged into iwlcore */ -int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq); void iwl_hw_txq_ctx_free(struct iwl_priv *priv); -int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *tfd, - dma_addr_t addr, u16 len); int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq); int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn); int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid); @@ -256,6 +247,7 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force); * RF -Kill - here and not in iwl-rfkill.h to be available when * RF-kill subsystem is not compiled. ****************************************************/ +void iwl_rf_kill(struct iwl_priv *priv); void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv); int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv); @@ -286,11 +278,17 @@ static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags) void iwl_init_scan_params(struct iwl_priv *priv); int iwl_scan_cancel(struct iwl_priv *priv); int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); -const char *iwl_escape_essid(const char *essid, u8 essid_len); int iwl_scan_initiate(struct iwl_priv *priv); void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); void iwl_setup_scan_deferred_work(struct iwl_priv *priv); +/******************************************************************************* + * Calibrations - implemented in iwl-calib.c + ******************************************************************************/ +int iwl_send_calib_results(struct iwl_priv *priv); +int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len); +void iwl_calib_free_results(struct iwl_priv *priv); + /***************************************************** * S e n d i n g H o s t C o m m a n d s * *****************************************************/ @@ -312,8 +310,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); /***************************************************** * Error Handling Debugging ******************************************************/ -void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode); void iwl_dump_nic_error_log(struct iwl_priv *priv); void iwl_dump_nic_event_log(struct iwl_priv *priv); @@ -337,8 +333,7 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv); #define STATUS_SCAN_HW 15 #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 -#define STATUS_CONF_PENDING 18 -#define STATUS_MODE_PENDING 19 +#define STATUS_MODE_PENDING 18 static inline int iwl_is_ready(struct iwl_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 52629fbd835..662edf4f8d2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -64,7 +64,7 @@ #define CSR_BASE (0x000) #define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */ -#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */ +#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */ #define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */ #define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */ #define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/ diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index d2daa174df2..e548d67f87f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -110,11 +110,12 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) * */ -#define IWL_DL_INFO (1 << 0) -#define IWL_DL_MAC80211 (1 << 1) -#define IWL_DL_HOST_COMMAND (1 << 2) -#define IWL_DL_STATE (1 << 3) +#define IWL_DL_INFO (1 << 0) +#define IWL_DL_MAC80211 (1 << 1) +#define IWL_DL_HCMD (1 << 2) +#define IWL_DL_STATE (1 << 3) #define IWL_DL_MACDUMP (1 << 4) +#define IWL_DL_HCMD_DUMP (1 << 5) #define IWL_DL_RADIO (1 << 7) #define IWL_DL_POWER (1 << 8) #define IWL_DL_TEMP (1 << 9) @@ -162,7 +163,8 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) #define IWL_DEBUG_ISR(f, a...) IWL_DEBUG(IWL_DL_ISR, f, ## a) #define IWL_DEBUG_LED(f, a...) IWL_DEBUG(IWL_DL_LED, f, ## a) #define IWL_DEBUG_WEP(f, a...) IWL_DEBUG(IWL_DL_WEP, f, ## a) -#define IWL_DEBUG_HC(f, a...) IWL_DEBUG(IWL_DL_HOST_COMMAND, f, ## a) +#define IWL_DEBUG_HC(f, a...) IWL_DEBUG(IWL_DL_HCMD, f, ## a) +#define IWL_DEBUG_HC_DUMP(f, a...) IWL_DEBUG(IWL_DL_HCMD_DUMP, f, ## a) #define IWL_DEBUG_CALIB(f, a...) IWL_DEBUG(IWL_DL_CALIB, f, ## a) #define IWL_DEBUG_FW(f, a...) IWL_DEBUG(IWL_DL_FW, f, ## a) #define IWL_DEBUG_RF_KILL(f, a...) IWL_DEBUG(IWL_DL_RF_KILL, f, ## a) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index cdfb343c7ec..c018121085e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -225,12 +225,6 @@ struct iwl_frame { struct list_head list; }; -#define SEQ_TO_QUEUE(x) ((x >> 8) & 0xbf) -#define QUEUE_TO_SEQ(x) ((x & 0xbf) << 8) -#define SEQ_TO_INDEX(x) ((u8)(x & 0xff)) -#define INDEX_TO_SEQ(x) ((u8)(x & 0xff)) -#define SEQ_HUGE_FRAME (0x4000) -#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) @@ -412,6 +406,7 @@ struct iwl_ht_info { /* self configuration data */ u8 is_ht; u8 supported_chan_width; + u8 sm_ps; u8 is_green_field; u8 sgf; /* HT_SHORT_GI_* short guard interval */ u8 max_amsdu_size; @@ -570,50 +565,31 @@ struct iwl_hw_params { #define IWL_RX_STATS(x) (&x->u.rx_frame.stats) #define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload) - /****************************************************************************** * - * Functions implemented in iwl-base.c which are forward declared here - * for use by iwl-*.c + * Functions implemented in core module which are forward declared here + * for use by iwl-[4-5].c * - *****************************************************************************/ -struct iwl_addsta_cmd; -extern int iwl_send_add_sta(struct iwl_priv *priv, - struct iwl_addsta_cmd *sta, u8 flags); -u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, - u8 flags, struct ieee80211_ht_info *ht_info); -extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - const u8 *dest, int left); -extern void iwl4965_update_chain_flags(struct iwl_priv *priv); -int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); -extern int iwl4965_set_power(struct iwl_priv *priv, void *cmd); - -extern const u8 iwl_bcast_addr[ETH_ALEN]; - -/****************************************************************************** - * - * Functions implemented in iwl-[34]*.c which are forward declared here - * for use by iwl-base.c - * - * NOTE: The implementation of these functions are hardware specific - * which is why they are in the hardware specific files (vs. iwl-base.c) + * NOTE: The implementation of these functions are not hardware specific + * which is why they are in the core module files. * * Naming convention -- - * iwl4965_ <-- Its part of iwlwifi (should be changed to iwl4965_) - * iwl4965_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW) + * iwl_ <-- Is part of iwlwifi * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) * iwl4965_bg_ <-- Called from work queue context * iwl4965_mac_ <-- mac80211 callback * ****************************************************************************/ +struct iwl_addsta_cmd; +extern int iwl_send_add_sta(struct iwl_priv *priv, + struct iwl_addsta_cmd *sta, u8 flags); +extern u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, + int is_ap, u8 flags, struct ieee80211_ht_info *ht_info); +extern void iwl4965_update_chain_flags(struct iwl_priv *priv); +extern int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); +extern const u8 iwl_bcast_addr[ETH_ALEN]; extern int iwl_rxq_stop(struct iwl_priv *priv); extern void iwl_txq_ctx_stop(struct iwl_priv *priv); -extern unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl_frame *frame, u8 rate); -extern void iwl4965_disable_events(struct iwl_priv *priv); - -extern int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel); extern int iwl_queue_space(const struct iwl_queue *q); static inline int iwl_queue_used(const struct iwl_queue *q, int i) { @@ -636,12 +612,6 @@ static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge) struct iwl_priv; -/* - * Forward declare iwl-4965.c functions for iwl-base.c - */ -extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); -int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, - u8 tid, int txq_id); /* Structures, enum, and defines specific to the 4965 */ @@ -656,11 +626,6 @@ struct iwl_kw { #define IWL_CHANNEL_WIDTH_20MHZ 0 #define IWL_CHANNEL_WIDTH_40MHZ 1 -#define IWL_MIMO_PS_STATIC 0 -#define IWL_MIMO_PS_NONE 3 -#define IWL_MIMO_PS_DYNAMIC 1 -#define IWL_MIMO_PS_INVALID 2 - #define IWL_OPERATION_MODE_AUTO 0 #define IWL_OPERATION_MODE_HT_ONLY 1 #define IWL_OPERATION_MODE_MIXED 2 @@ -671,18 +636,6 @@ struct iwl_kw { #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 -struct iwl4965_lq_mngr { - spinlock_t lock; - s32 max_window_size; - s32 *expected_tpt; - u8 *next_higher_rate; - u8 *next_lower_rate; - unsigned long stamp; - unsigned long stamp_last; - u32 flush_time; - u32 tx_packets; -}; - /* Sensitivity and chain noise calibration */ #define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1) #define INITIALIZATION_VALUE 0xFFFF @@ -727,8 +680,9 @@ enum iwl4965_false_alarm_state { enum iwl4965_chain_noise_state { IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ - IWL_CHAIN_NOISE_ACCUMULATE = 1, - IWL_CHAIN_NOISE_CALIBRATED = 2, + IWL_CHAIN_NOISE_ACCUMULATE, + IWL_CHAIN_NOISE_CALIBRATED, + IWL_CHAIN_NOISE_DONE, }; enum iwl4965_calib_enabled_state { @@ -745,13 +699,10 @@ struct statistics_general_data { u32 beacon_energy_c; }; -struct iwl_calib_results { - void *tx_iq_res; - void *tx_iq_perd_res; - void *lo_res; - u32 tx_iq_res_len; - u32 tx_iq_perd_res_len; - u32 lo_res_len; +/* Opaque calibration results */ +struct iwl_calib_result { + void *buf; + size_t buf_len; }; enum ucode_type { @@ -789,17 +740,18 @@ struct iwl_sensitivity_data { /* Chain noise (differential Rx gain) calib data */ struct iwl_chain_noise_data { - u8 state; - u16 beacon_count; + u32 active_chains; u32 chain_noise_a; u32 chain_noise_b; u32 chain_noise_c; u32 chain_signal_a; u32 chain_signal_b; u32 chain_signal_c; + u16 beacon_count; u8 disconn_array[NUM_RX_CHAINS]; u8 delta_gain_code[NUM_RX_CHAINS]; u8 radio_write; + u8 state; }; #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ @@ -813,6 +765,7 @@ enum { #define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */ +#define IWL_CALIB_MAX 3 struct iwl_priv { @@ -828,7 +781,6 @@ struct iwl_priv { enum ieee80211_band band; int alloc_rxb_skb; - bool add_radiotap; void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); @@ -857,7 +809,7 @@ struct iwl_priv { s32 last_temperature; /* init calibration results */ - struct iwl_calib_results calib_results; + struct iwl_calib_result calib_results[IWL_CALIB_MAX]; /* Scan related variables */ unsigned long last_scan_jiffies; @@ -939,9 +891,6 @@ struct iwl_priv { u8 last_phy_res[100]; /* Rate scaling data */ - struct iwl4965_lq_mngr lq_mngr; - - /* Rate scaling data */ s8 data_retry_limit; u8 retry_rate; @@ -1005,7 +954,7 @@ struct iwl_priv { u8 *eeprom; struct iwl_eeprom_calib_info *calib_info; - enum ieee80211_if_types iw_mode; + enum nl80211_iftype iw_mode; struct sk_buff *ibss_beacon; @@ -1025,7 +974,6 @@ struct iwl_priv { * hardware */ u16 assoc_id; u16 assoc_capability; - u8 ps_mode; struct iwl_qos_info qos_data; @@ -1047,6 +995,7 @@ struct iwl_priv { struct tasklet_struct irq_tasklet; + struct delayed_work set_power_save; struct delayed_work init_alive_start; struct delayed_work alive_start; struct delayed_work scan_check; diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index cd11c0ca299..a72efdf6d1d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -247,8 +247,8 @@ #define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ #define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ -#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20) -#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4) +#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) +#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) #define RX_RB_TIMEOUT (0x10) #define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) @@ -260,8 +260,9 @@ #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) +#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) /** diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 2eb03eea190..8300f3d00a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -120,8 +120,18 @@ static int iwl_generic_cmd_callback(struct iwl_priv *priv, return 1; } - IWL_DEBUG_HC("back from %s (0x%08X)\n", - get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); +#ifdef CONFIG_IWLWIFI_DEBUG + switch (cmd->hdr.cmd) { + case REPLY_TX_LINK_QUALITY_CMD: + case SENSITIVITY_CMD: + IWL_DEBUG_HC_DUMP("back from %s (0x%08X)\n", + get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); + break; + default: + IWL_DEBUG_HC("back from %s (0x%08X)\n", + get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); + } +#endif /* Let iwl_tx_complete free the response skb */ return 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 5bc3df432d2..9740fcc1805 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -61,7 +61,7 @@ * */ -#define _iwl_write32(priv, ofs, val) writel((val), (priv)->hw_base + (ofs)) +#define _iwl_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs)) #ifdef CONFIG_IWLWIFI_DEBUG static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv, u32 ofs, u32 val) @@ -75,7 +75,7 @@ static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv, #define iwl_write32(priv, ofs, val) _iwl_write32(priv, ofs, val) #endif -#define _iwl_read32(priv, ofs) readl((priv)->hw_base + (ofs)) +#define _iwl_read32(priv, ofs) ioread32((priv)->hw_base + (ofs)) #ifdef CONFIG_IWLWIFI_DEBUG static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs) { @@ -155,28 +155,10 @@ static inline void __iwl_clear_bit(const char *f, u32 l, static inline int _iwl_grab_nic_access(struct iwl_priv *priv) { int ret; - u32 gp_ctl; - #ifdef CONFIG_IWLWIFI_DEBUG if (atomic_read(&priv->restrict_refcnt)) return 0; #endif - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) { - IWL_WARNING("WARNING: Requesting MAC access during RFKILL " - "wakes up NIC\n"); - - /* 10 msec allows time for NIC to complete its data save */ - gp_ctl = _iwl_read32(priv, CSR_GP_CNTRL); - if (gp_ctl & CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY) { - IWL_DEBUG_RF_KILL("Wait for complete power-down, " - "gpctl = 0x%08x\n", gp_ctl); - mdelay(10); - } else - IWL_DEBUG_RF_KILL("power-down complete, " - "gpctl = 0x%08x\n", gp_ctl); - } - /* this bit wakes up the NIC */ _iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); ret = _iwl_poll_bit(priv, CSR_GP_CNTRL, diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index a099c9e30e5..60a03d2d2d0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -152,9 +152,10 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) /* initialize to default */ static int iwl_power_init_handle(struct iwl_priv *priv) { - int ret = 0, i; struct iwl_power_mgr *pow_data; int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX; + struct iwl_powertable_cmd *cmd; + int i; u16 pci_pm; IWL_DEBUG_POWER("Initialize power \n"); @@ -167,25 +168,19 @@ static int iwl_power_init_handle(struct iwl_priv *priv) memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); memcpy(&pow_data->pwr_range_2[0], &range_2[0], size); - ret = pci_read_config_word(priv->pci_dev, - PCI_LINK_CTRL, &pci_pm); - if (ret != 0) - return 0; - else { - struct iwl_powertable_cmd *cmd; + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &pci_pm); - IWL_DEBUG_POWER("adjust power command flags\n"); + IWL_DEBUG_POWER("adjust power command flags\n"); - for (i = 0; i < IWL_POWER_MAX; i++) { - cmd = &pow_data->pwr_range_0[i].cmd; + for (i = 0; i < IWL_POWER_MAX; i++) { + cmd = &pow_data->pwr_range_0[i].cmd; - if (pci_pm & 0x1) - cmd->flags &= ~IWL_POWER_PCI_PM_MSK; - else - cmd->flags |= IWL_POWER_PCI_PM_MSK; - } + if (pci_pm & PCI_CFG_LINK_CTRL_VAL_L0S_EN) + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + else + cmd->flags |= IWL_POWER_PCI_PM_MSK; } - return ret; + return 0; } /* adjust power command according to dtim period and power level*/ @@ -255,17 +250,26 @@ static int iwl_update_power_command(struct iwl_priv *priv, /* - * calucaute the final power mode index + * compute the final power mode index */ -int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) +int iwl_power_update_mode(struct iwl_priv *priv, bool force) { struct iwl_power_mgr *setting = &(priv->power_data); int ret = 0; u16 uninitialized_var(final_mode); - /* If on battery, set to 3, - * if plugged into AC power, set to CAM ("continuously aware mode"), - * else user level */ + /* Don't update the RX chain when chain noise calibration is running */ + if (priv->chain_noise_data.state != IWL_CHAIN_NOISE_DONE && + priv->chain_noise_data.state != IWL_CHAIN_NOISE_ALIVE) { + IWL_DEBUG_POWER("Cannot update the power, chain noise " + "calibration running: %d\n", + priv->chain_noise_data.state); + return -EAGAIN; + } + + /* If on battery, set to 3, + * if plugged into AC power, set to CAM ("continuously aware mode"), + * else user level */ switch (setting->system_power_setting) { case IWL_POWER_SYS_AUTO: @@ -286,11 +290,11 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) final_mode = setting->critical_power_setting; /* driver only support CAM for non STA network */ - if (priv->iw_mode != IEEE80211_IF_TYPE_STA) + if (priv->iw_mode != NL80211_IFTYPE_STATION) final_mode = IWL_POWER_MODE_CAM; if (!iwl_is_rfkill(priv) && !setting->power_disabled && - ((setting->power_mode != final_mode) || refresh)) { + ((setting->power_mode != final_mode) || force)) { struct iwl_powertable_cmd cmd; if (final_mode != IWL_POWER_MODE_CAM) @@ -324,7 +328,7 @@ EXPORT_SYMBOL(iwl_power_update_mode); * this will be usefull for rate scale to disable PM during heavy * Tx/Rx activities */ -int iwl_power_disable_management(struct iwl_priv *priv) +int iwl_power_disable_management(struct iwl_priv *priv, u32 ms) { u16 prev_mode; int ret = 0; @@ -337,6 +341,11 @@ int iwl_power_disable_management(struct iwl_priv *priv) ret = iwl_power_update_mode(priv, 0); priv->power_data.power_disabled = 1; priv->power_data.user_power_setting = prev_mode; + cancel_delayed_work(&priv->set_power_save); + if (ms) + queue_delayed_work(priv->workqueue, &priv->set_power_save, + msecs_to_jiffies(ms)); + return ret; } @@ -359,35 +368,26 @@ EXPORT_SYMBOL(iwl_power_enable_management); /* set user_power_setting */ int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode) { - int ret = 0; - if (mode > IWL_POWER_LIMIT) return -EINVAL; priv->power_data.user_power_setting = mode; - ret = iwl_power_update_mode(priv, 0); - - return ret; + return iwl_power_update_mode(priv, 0); } EXPORT_SYMBOL(iwl_power_set_user_mode); - /* set system_power_setting. This should be set by over all * PM application. */ int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode) { - int ret = 0; - if (mode > IWL_POWER_LIMIT) return -EINVAL; priv->power_data.system_power_setting = mode; - ret = iwl_power_update_mode(priv, 0); - - return ret; + return iwl_power_update_mode(priv, 0); } EXPORT_SYMBOL(iwl_power_set_system_mode); @@ -431,3 +431,35 @@ int iwl_power_temperature_change(struct iwl_priv *priv) return ret; } EXPORT_SYMBOL(iwl_power_temperature_change); + +static void iwl_bg_set_power_save(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, + struct iwl_priv, set_power_save.work); + IWL_DEBUG(IWL_DL_STATE, "update power\n"); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + + /* on starting association we disable power managment + * until association, if association failed then this + * timer will expire and enable PM again. + */ + if (!iwl_is_associated(priv)) + iwl_power_enable_management(priv); + + mutex_unlock(&priv->mutex); +} +void iwl_setup_power_deferred_work(struct iwl_priv *priv) +{ + INIT_DELAYED_WORK(&priv->set_power_save, iwl_bg_set_power_save); +} +EXPORT_SYMBOL(iwl_setup_power_deferred_work); + +void iwl_power_cancel_timeout(struct iwl_priv *priv) +{ + cancel_delayed_work(&priv->set_power_save); +} +EXPORT_SYMBOL(iwl_power_cancel_timeout); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index abcbbf96a84..df484a90ae6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -72,14 +72,16 @@ struct iwl_power_mgr { /* final power level that used to calculate final power command */ u8 power_mode; u8 user_power_setting; /* set by user through mac80211 or sysfs */ - u8 system_power_setting; /* set by kernel syatem tools */ + u8 system_power_setting; /* set by kernel system tools */ u8 critical_power_setting; /* set if driver over heated */ u8 is_battery_active; /* DC/AC power */ u8 power_disabled; /* flag to disable using power saving level */ }; -int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh); -int iwl_power_disable_management(struct iwl_priv *priv); +void iwl_setup_power_deferred_work(struct iwl_priv *priv); +void iwl_power_cancel_timeout(struct iwl_priv *priv); +int iwl_power_update_mode(struct iwl_priv *priv, bool force); +int iwl_power_disable_management(struct iwl_priv *priv, u32 ms); int iwl_power_enable_management(struct iwl_priv *priv); int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode); int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index e81bfc42a7c..7cde9d76ff5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -376,7 +376,9 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) { int ret; unsigned long flags; - unsigned int rb_size; + u32 rb_size; + const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ + const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */ spin_lock_irqsave(&priv->lock, flags); ret = iwl_grab_nic_access(priv); @@ -398,26 +400,32 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) /* Tell device where to find RBD circular buffer in DRAM */ iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - rxq->dma_addr >> 8); + (u32)(rxq->dma_addr >> 8)); /* Tell device where in DRAM to update its Rx status */ iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, (priv->shared_phys + priv->rb_closed_offset) >> 4); - /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */ + /* Enable Rx DMA + * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in + * the credit mechanism in 5000 HW RX FIFO + * Direct rx interrupts to hosts + * Rx buffer size 4 or 8k + * RB timeout 0x10 + * 256 RBDs + */ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - rb_size | - /* 0x10 << 4 | */ - (RX_QUEUE_SIZE_LOG << - FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT)); - - /* - * iwl_write32(priv,CSR_INT_COAL_REG,0); - */ + rb_size| + (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| + (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); iwl_release_nic_access(priv); + + iwl_write32(priv, CSR_INT_COALESCING, 0x40); + spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -789,107 +797,6 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv, } #endif -static void iwl_add_radiotap(struct iwl_priv *priv, - struct sk_buff *skb, - struct iwl_rx_phy_res *rx_start, - struct ieee80211_rx_status *stats, - u32 ampdu_status) -{ - s8 signal = stats->signal; - s8 noise = 0; - int rate = stats->rate_idx; - u64 tsf = stats->mactime; - __le16 antenna; - __le16 phy_flags_hw = rx_start->phy_flags; - struct iwl4965_rt_rx_hdr { - struct ieee80211_radiotap_header rt_hdr; - __le64 rt_tsf; /* TSF */ - u8 rt_flags; /* radiotap packet flags */ - u8 rt_rate; /* rate in 500kb/s */ - __le16 rt_channelMHz; /* channel in MHz */ - __le16 rt_chbitmask; /* channel bitfield */ - s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ - s8 rt_dbmnoise; - u8 rt_antenna; /* antenna number */ - } __attribute__ ((packed)) *iwl4965_rt; - - /* TODO: We won't have enough headroom for HT frames. Fix it later. */ - if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { - if (net_ratelimit()) - printk(KERN_ERR "not enough headroom [%d] for " - "radiotap head [%zd]\n", - skb_headroom(skb), sizeof(*iwl4965_rt)); - return; - } - - /* put radiotap header in front of 802.11 header and data */ - iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); - - /* initialise radiotap header */ - iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; - iwl4965_rt->rt_hdr.it_pad = 0; - - /* total header + data */ - put_unaligned_le16(sizeof(*iwl4965_rt), &iwl4965_rt->rt_hdr.it_len); - - /* Indicate all the fields we add to the radiotap header */ - put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA), - &(iwl4965_rt->rt_hdr.it_present)); - - /* Zero the flags, we'll add to them as we go */ - iwl4965_rt->rt_flags = 0; - - put_unaligned_le64(tsf, &iwl4965_rt->rt_tsf); - - iwl4965_rt->rt_dbmsignal = signal; - iwl4965_rt->rt_dbmnoise = noise; - - /* Convert the channel frequency and set the flags */ - put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); - if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, - &iwl4965_rt->rt_chbitmask); - else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, - &iwl4965_rt->rt_chbitmask); - else /* 802.11g */ - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, - &iwl4965_rt->rt_chbitmask); - - if (rate == -1) - iwl4965_rt->rt_rate = 0; - else - iwl4965_rt->rt_rate = iwl_rates[rate].ieee; - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bitfield. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favour of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; - iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; - - /* set the preamble flag if appropriate */ - if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; - - stats->flag |= RX_FLAG_RADIOTAP; -} - static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) { /* 0 - mgmt, 1 - cnt, 2 - data */ @@ -1074,9 +981,6 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) return; - if (priv->add_radiotap) - iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); - iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); priv->alloc_rxb_skb--; @@ -1130,10 +1034,10 @@ static int iwl_is_network_packet(struct iwl_priv *priv, /* Filter incoming packets to determine if they are targeted toward * this network, discarding packets coming from ourselves */ switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ + case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ /* packets to our IBSS update information */ return !compare_ether_addr(header->addr3, priv->bssid); - case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ + case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ /* packets to our IBSS update information */ return !compare_ether_addr(header->addr2, priv->bssid); default: @@ -1171,7 +1075,6 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - rx_status.antenna = 0; rx_status.flag = 0; /* TSF isn't reliable. In order to allow smooth user experience, @@ -1253,8 +1156,28 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, rx_status.signal, rx_status.noise, rx_status.signal, (unsigned long long)rx_status.mactime); + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bitfield. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favour of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = le16_to_cpu(rx_start->phy_flags & + RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; + + /* set the preamble flag if appropriate */ + if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + /* Take shortcut when only in monitor mode */ - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { iwl_pass_packet_to_mac80211(priv, include_phy, rxb, &rx_status); return; @@ -1271,7 +1194,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, switch (fc & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: case IEEE80211_FTYPE_DATA: - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + if (priv->iw_mode == NL80211_IFTYPE_AP) iwl_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, header->addr2); /* fall through */ diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 6c8ac3a87d5..3b0bee331a3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -88,7 +88,7 @@ static int iwl_is_empty_essid(const char *essid, int essid_len) -const char *iwl_escape_essid(const char *essid, u8 essid_len) +static const char *iwl_escape_essid(const char *essid, u8 essid_len) { static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; const char *s = essid; @@ -111,7 +111,6 @@ const char *iwl_escape_essid(const char *essid, u8 essid_len) *d = '\0'; return escaped; } -EXPORT_SYMBOL(iwl_escape_essid); /** * iwl_scan_cancel - Cancel any currently executing HW scan @@ -464,11 +463,6 @@ void iwl_init_scan_params(struct iwl_priv *priv) int iwl_scan_initiate(struct iwl_priv *priv) { - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("APs don't scan.\n"); - return 0; - } - if (!iwl_is_ready_rf(priv)) { IWL_DEBUG_SCAN("Aborting scan due to not ready.\n"); return -EIO; @@ -480,8 +474,7 @@ int iwl_scan_initiate(struct iwl_priv *priv) } if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN("Scan request while abort pending. " - "Queuing.\n"); + IWL_DEBUG_SCAN("Scan request while abort pending\n"); return -EAGAIN; } @@ -710,7 +703,7 @@ static void iwl_bg_request_scan(struct work_struct *data) u16 cmd_len; enum ieee80211_band band; u8 n_probes = 2; - u8 rx_chain = 0x7; /* bitmap: ABC chains */ + u8 rx_chain = priv->hw_params.valid_rx_ant; conf = ieee80211_get_hw_conf(priv->hw); @@ -850,7 +843,7 @@ static void iwl_bg_request_scan(struct work_struct *data) /* Force use of chains B and C (0x6) for scan Rx for 4965 * Avoid A (0x1) because of its off-channel reception on A-band. - * MIMO is not used here, but value is required */ + */ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) rx_chain = 0x6; } else { @@ -858,6 +851,7 @@ static void iwl_bg_request_scan(struct work_struct *data) goto done; } + /* MIMO is not used here, but value is required */ scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) | @@ -869,7 +863,7 @@ static void iwl_bg_request_scan(struct work_struct *data) scan->tx_cmd.len = cpu_to_le16(cmd_len); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) scan->filter_flags = RXON_FILTER_PROMISC_MSK; scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | @@ -922,10 +916,29 @@ static void iwl_bg_abort_scan(struct work_struct *work) mutex_unlock(&priv->mutex); } +static void iwl_bg_scan_completed(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, scan_completed); + + IWL_DEBUG_SCAN("SCAN complete scan\n"); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + ieee80211_scan_completed(priv->hw); + + /* Since setting the TXPOWER may have been deferred while + * performing the scan, fire one off */ + mutex_lock(&priv->mutex); + iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); + mutex_unlock(&priv->mutex); +} + + void iwl_setup_scan_deferred_work(struct iwl_priv *priv) { - /* FIXME: move here when resolved PENDING - * INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */ + INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); INIT_WORK(&priv->request_scan, iwl_bg_request_scan); INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 6283a3a707f..61797f3f8d5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -47,8 +47,8 @@ u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr) unsigned long flags; DECLARE_MAC_BUF(mac); - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) || - (priv->iw_mode == IEEE80211_IF_TYPE_AP)) + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) || + (priv->iw_mode == NL80211_IFTYPE_AP)) start = IWL_STA_ID; if (is_broadcast_ether_addr(addr)) @@ -74,7 +74,7 @@ EXPORT_SYMBOL(iwl_find_station); int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) { - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + if (priv->iw_mode == NL80211_IFTYPE_STATION) { return IWL_AP_ID; } else { u8 *da = ieee80211_get_DA(hdr); @@ -191,20 +191,20 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, if (!sta_ht_inf || !sta_ht_inf->ht_supported) goto done; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2; + mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; sta_flags = priv->stations[index].sta.station_flags; sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); switch (mimo_ps_mode) { - case WLAN_HT_CAP_MIMO_PS_STATIC: + case WLAN_HT_CAP_SM_PS_STATIC: sta_flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_MIMO_PS_DYNAMIC: + case WLAN_HT_CAP_SM_PS_DYNAMIC: sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_MIMO_PS_DISABLED: + case WLAN_HT_CAP_SM_PS_DISABLED: break; default: IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode); @@ -286,7 +286,7 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, /* BCAST station and IBSS stations do not work in HT mode */ if (sta_id != priv->hw_params.bcast_sta_id && - priv->iw_mode != IEEE80211_IF_TYPE_IBSS) + priv->iw_mode != NL80211_IFTYPE_ADHOC) iwl_set_ht_add_station(priv, sta_id, ht_info); spin_unlock_irqrestore(&priv->sta_lock, flags_spin); @@ -817,7 +817,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, }; if ((lq->sta_id == 0xFF) && - (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) + (priv->iw_mode == NL80211_IFTYPE_ADHOC)) return -EINVAL; if (lq->sta_id == 0xFF) @@ -904,7 +904,7 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) if ((is_ap) && (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && - (priv->iw_mode == IEEE80211_IF_TYPE_STA)) + (priv->iw_mode == NL80211_IFTYPE_STATION)) sta_id = iwl_add_station_flags(priv, addr, is_ap, 0, cur_ht_config); else @@ -938,11 +938,11 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) /* If we are a client station in a BSS network, use the special * AP station entry (that's the only station we communicate with) */ - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: return IWL_AP_ID; /* If we are an AP, then find the station, or use BCAST */ - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_AP: sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; @@ -950,7 +950,7 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) /* If this frame is going out to an IBSS network, find the station, * or create a new station table entry */ - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; @@ -968,6 +968,11 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); return priv->hw_params.bcast_sta_id; + /* If we are in monitor mode, use BCAST. This is required for + * packet injection. */ + case NL80211_IFTYPE_MONITOR: + return priv->hw_params.bcast_sta_id; + default: IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode); return priv->hw_params.bcast_sta_id; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 78b1a7a4ca4..907a53ebc6e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -63,7 +63,7 @@ static const u16 default_tid_to_tx_fifo[] = { * Does NOT advance any TFD circular buffer read/write indexes * Does NOT free the TFD itself (which is within circular buffer) */ -int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) +static int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) { struct iwl_tfd_frame *bd_tmp = (struct iwl_tfd_frame *)&txq->bd[0]; struct iwl_tfd_frame *bd = &bd_tmp[txq->q.read_ptr]; @@ -115,10 +115,8 @@ int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) } return 0; } -EXPORT_SYMBOL(iwl_hw_txq_free_tfd); - -int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, +static int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, dma_addr_t addr, u16 len) { int index, is_odd; @@ -126,7 +124,7 @@ int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs); /* Each TFD can point to a maximum 20 Tx buffers */ - if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) { + if (num_tbs >= MAX_NUM_OF_TBS) { IWL_ERROR("Error can not send more than %d chunks\n", MAX_NUM_OF_TBS); return -EINVAL; @@ -151,7 +149,6 @@ int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, return 0; } -EXPORT_SYMBOL(iwl_hw_txq_attach_buf_to_tfd); /** * iwl_txq_update_write_ptr - Send new write index to hardware @@ -478,7 +475,6 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_hw_txq_ctx_free); - /** * iwl_txq_ctx_reset - Reset TX queue context * Destroys all DMA structures and initialise them again @@ -545,6 +541,7 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv) error_kw: return ret; } + /** * iwl_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory */ @@ -796,11 +793,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) goto drop_unlock; } - if (!priv->vif) { - IWL_DEBUG_DROP("Dropping - !priv->vif\n"); - goto drop_unlock; - } - if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) { IWL_ERROR("ERROR: No TX rate available.\n"); @@ -822,16 +814,18 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* drop all data frame if we are not associated */ if (ieee80211_is_data(fc) && - (!iwl_is_associated(priv) || - ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) || - !priv->assoc_station_added)) { + (priv->iw_mode != NL80211_IFTYPE_MONITOR || + !(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */ + (!iwl_is_associated(priv) || + ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id) || + !priv->assoc_station_added)) { IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n"); goto drop_unlock; } spin_unlock_irqrestore(&priv->lock, flags); - hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc)); + hdr_len = ieee80211_hdrlen(fc); /* Find (or create) index into station table for destination station */ sta_id = iwl_get_sta_id(priv, hdr); @@ -849,7 +843,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq_id = swq_id; if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; seq_number = priv->stations[sta_id].tid[tid].seq_number; seq_number &= IEEE80211_SCTL_SEQ; hdr->seq_ctrl = hdr->seq_ctrl & @@ -1064,7 +1058,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) | INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) - out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); + out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; len = (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); phys_addr = pci_map_single(priv->pci_dev, out_cmd, len, @@ -1072,12 +1066,26 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) phys_addr += offsetof(struct iwl_cmd, hdr); iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); - IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " - "%d bytes at %d[%d]:%d\n", - get_cmd_string(out_cmd->hdr.cmd), - out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), - fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM); - +#ifdef CONFIG_IWLWIFI_DEBUG + switch (out_cmd->hdr.cmd) { + case REPLY_TX_LINK_QUALITY_CMD: + case SENSITIVITY_CMD: + IWL_DEBUG_HC_DUMP("Sending command %s (#%x), seq: 0x%04X, " + "%d bytes at %d[%d]:%d\n", + get_cmd_string(out_cmd->hdr.cmd), + out_cmd->hdr.cmd, + le16_to_cpu(out_cmd->hdr.sequence), fix_size, + q->write_ptr, idx, IWL_CMD_QUEUE_NUM); + break; + default: + IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " + "%d bytes at %d[%d]:%d\n", + get_cmd_string(out_cmd->hdr.cmd), + out_cmd->hdr.cmd, + le16_to_cpu(out_cmd->hdr.sequence), fix_size, + q->write_ptr, idx, IWL_CMD_QUEUE_NUM); + } +#endif txq->need_update = 1; /* Set up entry in queue's byte count circular buffer */ @@ -1185,17 +1193,16 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) u16 sequence = le16_to_cpu(pkt->hdr.sequence); int txq_id = SEQ_TO_QUEUE(sequence); int index = SEQ_TO_INDEX(sequence); - int huge = sequence & SEQ_HUGE_FRAME; int cmd_index; + bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME); struct iwl_cmd *cmd; /* If a Tx command is being handled and it isn't in the actual * command queue then there a command routing bug has been introduced * in the queue management code. */ - if (txq_id != IWL_CMD_QUEUE_NUM) - IWL_ERROR("Error wrong command queue %d command id 0x%X\n", - txq_id, pkt->hdr.cmd); - BUG_ON(txq_id != IWL_CMD_QUEUE_NUM); + if (WARN(txq_id != IWL_CMD_QUEUE_NUM, + "wrong command queue %d, command id 0x%X\n", txq_id, pkt->hdr.cmd)) + return; cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b775d5bab66..d15a2c99795 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1160,7 +1160,7 @@ static int iwl3945_commit_rxon(struct iwl3945_priv *priv) /* If we have set the ASSOC_MSK and we are in BSS mode then * add the IWL_AP_ID to the station rate table */ if (iwl3945_is_associated(priv) && - (priv->iw_mode == IEEE80211_IF_TYPE_STA)) + (priv->iw_mode == NL80211_IFTYPE_STATION)) if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr, 1, 0) == IWL_INVALID_STATION) { IWL_ERROR("Error adding AP address for transmit.\n"); @@ -1447,8 +1447,8 @@ unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv, { if (!iwl3945_is_associated(priv) || !priv->ibss_beacon || - ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && - (priv->iw_mode != IEEE80211_IF_TYPE_AP))) + ((priv->iw_mode != NL80211_IFTYPE_ADHOC) && + (priv->iw_mode != NL80211_IFTYPE_AP))) return 0; if (priv->ibss_beacon->len > left) @@ -1746,14 +1746,14 @@ static void iwl3945_reset_qos(struct iwl3945_priv *priv) spin_lock_irqsave(&priv->lock, flags); priv->qos_data.qos_active = 0; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) { + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) { if (priv->qos_data.qos_enable) priv->qos_data.qos_active = 1; if (!(priv->active_rate & 0xfff0)) { cw_min = 31; is_legacy = 1; } - } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + } else if (priv->iw_mode == NL80211_IFTYPE_AP) { if (priv->qos_data.qos_enable) priv->qos_data.qos_active = 1; } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) { @@ -2120,7 +2120,7 @@ static void iwl3945_setup_rxon_timing(struct iwl3945_priv *priv) beacon_int = priv->beacon_int; spin_unlock_irqrestore(&priv->lock, flags); - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + if (priv->iw_mode == NL80211_IFTYPE_STATION) { if (beacon_int == 0) { priv->rxon_timing.beacon_interval = cpu_to_le16(100); priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); @@ -2156,7 +2156,7 @@ static void iwl3945_setup_rxon_timing(struct iwl3945_priv *priv) static int iwl3945_scan_initiate(struct iwl3945_priv *priv) { - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode == NL80211_IFTYPE_AP) { IWL_ERROR("APs don't scan.\n"); return 0; } @@ -2218,7 +2218,7 @@ static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv, else priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; @@ -2237,23 +2237,23 @@ static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv) memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_AP: priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; break; - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | RXON_FILTER_ACCEPT_GRP_MSK; break; - case IEEE80211_IF_TYPE_MNTR: + case NL80211_IFTYPE_MONITOR: priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; @@ -2282,7 +2282,7 @@ static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv) * in some case A channels are all non IBSS * in this case force B/G channel */ - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !(is_channel_ibss(ch_info))) ch_info = &priv->channel_info[0]; @@ -2302,7 +2302,7 @@ static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv) static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode) { - if (mode == IEEE80211_IF_TYPE_IBSS) { + if (mode == NL80211_IFTYPE_ADHOC) { const struct iwl3945_channel_info *ch_info; ch_info = iwl3945_get_channel_info(priv, @@ -2469,11 +2469,11 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h /* If we are a client station in a BSS network, use the special * AP station entry (that's the only station we communicate with) */ - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: return IWL_AP_ID; /* If we are an AP, then find the station, or use BCAST */ - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_AP: sta_id = iwl3945_hw_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; @@ -2481,7 +2481,7 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h /* If this frame is going out to an IBSS network, find the station, * or create a new station table entry */ - case IEEE80211_IF_TYPE_IBSS: { + case NL80211_IFTYPE_ADHOC: { DECLARE_MAC_BUF(mac); /* Create new station table entry */ @@ -2502,7 +2502,7 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h } /* If we are in monitor mode, use BCAST. This is required for * packet injection. */ - case IEEE80211_IF_TYPE_MNTR: + case NL80211_IFTYPE_MONITOR: return priv->hw_setting.bcast_sta_id; default: @@ -2565,16 +2565,16 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) /* drop all data frame if we are not associated */ if (ieee80211_is_data(fc) && - (priv->iw_mode != IEEE80211_IF_TYPE_MNTR) && /* packet injection */ + (priv->iw_mode != NL80211_IFTYPE_MONITOR) && /* packet injection */ (!iwl3945_is_associated(priv) || - ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id))) { + ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) { IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n"); goto drop_unlock; } spin_unlock_irqrestore(&priv->lock, flags); - hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc)); + hdr_len = ieee80211_hdrlen(fc); /* Find (or create) index into station table for destination station */ sta_id = iwl3945_get_sta_id(priv, hdr); @@ -2590,7 +2590,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; seq_number = priv->stations[sta_id].tid[tid].seq_number & IEEE80211_SCTL_SEQ; hdr->seq_ctrl = cpu_to_le16(seq_number) | @@ -2709,7 +2709,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) sizeof(out_cmd->cmd.tx)); iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr, - ieee80211_get_hdrlen(le16_to_cpu(fc))); + ieee80211_hdrlen(fc)); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -2806,7 +2806,7 @@ static void iwl3945_radio_kill_sw(struct iwl3945_priv *priv, int disable_radio) if (disable_radio) { iwl3945_scan_cancel(priv); /* FIXME: This is a workaround for AP */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode != NL80211_IFTYPE_AP) { spin_lock_irqsave(&priv->lock, flags); iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_SW_BIT_RFKILL); @@ -3161,7 +3161,7 @@ static void iwl3945_rx_beacon_notif(struct iwl3945_priv *priv, le32_to_cpu(beacon->low_tsf), rate); #endif - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + if ((priv->iw_mode == NL80211_IFTYPE_AP) && (!test_bit(STATUS_EXIT_PENDING, &priv->status))) queue_work(priv->workqueue, &priv->beacon_update); } @@ -4782,8 +4782,11 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv) /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after * sending probe req. This should be set long enough to hear probe responses * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (10) +#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ +#define IWL_ACTIVE_DWELL_TIME_52 (20) + +#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) +#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) /* For faster active scanning, scan will move to the next channel if fewer than * PLCP_QUIET_THRESH packets are heard on this channel within @@ -4792,7 +4795,7 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv) * no other traffic). * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ -#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */ +#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */ /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. * Must be set longer than active dwell time. @@ -4802,19 +4805,23 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv) #define IWL_PASSIVE_DWELL_BASE (100) #define IWL_CHANNEL_TUNE_TIME 5 +#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) + static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv, - enum ieee80211_band band) + enum ieee80211_band band, + u8 n_probes) { if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52; + return IWL_ACTIVE_DWELL_TIME_52 + + IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); else - return IWL_ACTIVE_DWELL_TIME_24; + return IWL_ACTIVE_DWELL_TIME_24 + + IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); } static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv, enum ieee80211_band band) { - u16 active = iwl3945_get_active_dwell_time(priv, band); u16 passive = (band == IEEE80211_BAND_2GHZ) ? IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; @@ -4829,15 +4836,12 @@ static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv, passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; } - if (passive <= active) - passive = active + 1; - return passive; } static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, enum ieee80211_band band, - u8 is_active, u8 direct_mask, + u8 is_active, u8 n_probes, struct iwl3945_scan_channel *scan_ch) { const struct ieee80211_channel *channels = NULL; @@ -4853,9 +4857,12 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, channels = sband->channels; - active_dwell = iwl3945_get_active_dwell_time(priv, band); + active_dwell = iwl3945_get_active_dwell_time(priv, band, n_probes); passive_dwell = iwl3945_get_passive_dwell_time(priv, band); + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + for (i = 0, added = 0; i < sband->n_channels; i++) { if (channels[i].flags & IEEE80211_CHAN_DISABLED) continue; @@ -4875,8 +4882,8 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, else scan_ch->type = 1; /* active */ - if (scan_ch->type & 1) - scan_ch->type |= (direct_mask << 1); + if ((scan_ch->type & 1) && n_probes) + scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); @@ -6052,7 +6059,7 @@ static void iwl3945_bg_set_monitor(struct work_struct *work) if (!iwl3945_is_ready(priv)) IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); else - if (iwl3945_set_mode(priv, IEEE80211_IF_TYPE_MNTR) != 0) + if (iwl3945_set_mode(priv, NL80211_IFTYPE_MONITOR) != 0) IWL_ERROR("iwl3945_set_mode() failed\n"); mutex_unlock(&priv->mutex); @@ -6093,7 +6100,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data) int rc = 0; struct iwl3945_scan_cmd *scan; struct ieee80211_conf *conf = NULL; - u8 direct_mask; + u8 n_probes = 2; enum ieee80211_band band; conf = ieee80211_get_hw_conf(priv->hw); @@ -6201,7 +6208,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data) scan->direct_scan[0].len = priv->direct_ssid_len; memcpy(scan->direct_scan[0].ssid, priv->direct_ssid, priv->direct_ssid_len); - direct_mask = 1; + n_probes++; } else if (!iwl3945_is_associated(priv) && priv->essid_len) { IWL_DEBUG_SCAN ("Kicking off one direct scan for '%s' when not associated\n", @@ -6209,11 +6216,9 @@ static void iwl3945_bg_request_scan(struct work_struct *data) scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->essid_len; memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); - direct_mask = 1; - } else { + n_probes++; + } else IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); - direct_mask = 0; - } /* We don't build a direct scan probe request; the uCode will do * that based on the direct_mask added to each channel entry */ @@ -6243,21 +6248,13 @@ static void iwl3945_bg_request_scan(struct work_struct *data) /* select Rx antennas */ scan->flags |= iwl3945_get_antenna_flags(priv); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) scan->filter_flags = RXON_FILTER_PROMISC_MSK; - if (direct_mask) - scan->channel_count = - iwl3945_get_channels_for_scan( - priv, band, 1, /* active */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - else - scan->channel_count = - iwl3945_get_channels_for_scan( - priv, band, 0, /* passive */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + scan->channel_count = + iwl3945_get_channels_for_scan(priv, band, 1, /* active */ + n_probes, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl3945_scan_channel); @@ -6320,16 +6317,13 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data) #define IWL_DELAY_NEXT_SCAN (HZ*2) -static void iwl3945_bg_post_associate(struct work_struct *data) +static void iwl3945_post_associate(struct iwl3945_priv *priv) { - struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, - post_associate.work); - int rc = 0; struct ieee80211_conf *conf = NULL; DECLARE_MAC_BUF(mac); - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode == NL80211_IFTYPE_AP) { IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -6342,12 +6336,9 @@ static void iwl3945_bg_post_associate(struct work_struct *data) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - mutex_lock(&priv->mutex); - - if (!priv->vif || !priv->is_open) { - mutex_unlock(&priv->mutex); + if (!priv->vif || !priv->is_open) return; - } + iwl3945_scan_cancel_timeout(priv, 200); conf = ieee80211_get_hw_conf(priv->hw); @@ -6381,7 +6372,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data) else priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; } @@ -6389,11 +6380,11 @@ static void iwl3945_bg_post_associate(struct work_struct *data) iwl3945_commit_rxon(priv); switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: iwl3945_rate_scale_init(priv->hw, IWL_AP_ID); break; - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_ADHOC: /* clear out the station table */ iwl3945_clear_stations_table(priv); @@ -6419,7 +6410,6 @@ static void iwl3945_bg_post_associate(struct work_struct *data) /* we have just associated, don't start scan too early */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; - mutex_unlock(&priv->mutex); } static void iwl3945_bg_abort_scan(struct work_struct *work) @@ -6567,7 +6557,6 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw) */ mutex_lock(&priv->mutex); iwl3945_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); mutex_unlock(&priv->mutex); } @@ -6650,8 +6639,6 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); - if (!iwl3945_is_ready(priv)) { IWL_DEBUG_MAC80211("leave - not ready\n"); ret = -EIO; @@ -6767,7 +6754,7 @@ static void iwl3945_config_ap(struct iwl3945_priv *priv) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; } @@ -6804,7 +6791,7 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, } /* handle this temporarily here */ - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + if (priv->iw_mode == NL80211_IFTYPE_ADHOC && conf->changed & IEEE80211_IFCC_BEACON) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); if (!beacon) @@ -6816,7 +6803,7 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, /* XXX: this MUST use conf->mac_addr */ - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + if ((priv->iw_mode == NL80211_IFTYPE_AP) && (!conf->ssid_len)) { IWL_DEBUG_MAC80211 ("Leaving in AP mode because HostAPD is not ready.\n"); @@ -6839,7 +6826,7 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { */ - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode == NL80211_IFTYPE_AP) { if (!conf->bssid) { conf->bssid = priv->mac_addr; memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); @@ -6874,11 +6861,11 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, * to verify) - jpk */ memcpy(priv->bssid, conf->bssid, ETH_ALEN); - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + if (priv->iw_mode == NL80211_IFTYPE_AP) iwl3945_config_ap(priv); else { rc = iwl3945_commit_rxon(priv); - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) + if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc) iwl3945_add_station(priv, priv->active_rxon.bssid_addr, 1, 0); } @@ -6914,7 +6901,7 @@ static void iwl3945_configure_filter(struct ieee80211_hw *hw, if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", - IEEE80211_IF_TYPE_MNTR, + NL80211_IFTYPE_MONITOR, changed_flags, *total_flags); /* queue work 'cuz mac80211 is holding a lock which * prevents us from issuing (synchronous) f/w cmds */ @@ -6935,7 +6922,6 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw, if (iwl3945_is_ready_rf(priv)) { iwl3945_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl3945_commit_rxon(priv); } @@ -6950,6 +6936,63 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211("leave\n"); } +#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) + +static void iwl3945_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl3945_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("changes = 0x%X\n", changes); + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n", + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + } + + if (changes & BSS_CHANGED_ERP_CTS_PROT) { + IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) + priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; + } + + if (changes & BSS_CHANGED_ASSOC) { + IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc); + /* This should never happen as this function should + * never be called from interrupt context. */ + if (WARN_ON_ONCE(in_interrupt())) + return; + if (bss_conf->assoc) { + priv->assoc_id = bss_conf->aid; + priv->beacon_int = bss_conf->beacon_int; + priv->timestamp0 = bss_conf->timestamp & 0xFFFFFFFF; + priv->timestamp1 = (bss_conf->timestamp >> 32) & + 0xFFFFFFFF; + priv->assoc_capability = bss_conf->assoc_capability; + priv->next_scan_jiffies = jiffies + + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; + mutex_lock(&priv->mutex); + iwl3945_post_associate(priv); + mutex_unlock(&priv->mutex); + } else { + priv->assoc_id = 0; + IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc); + } + } else if (changes && iwl3945_is_associated(priv) && priv->assoc_id) { + IWL_DEBUG_MAC80211("Associated Changes %d\n", changes); + iwl3945_send_rxon_assoc(priv); + } + +} + static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) { int rc = 0; @@ -6967,7 +7010,7 @@ static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) goto out_unlock; } - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ + if (priv->iw_mode == NL80211_IFTYPE_AP) { /* APs don't scan */ rc = -EIO; IWL_ERROR("ERROR: APs don't scan\n"); goto out_unlock; @@ -7109,7 +7152,7 @@ static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, spin_unlock_irqrestore(&priv->lock, flags); mutex_lock(&priv->mutex); - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + if (priv->iw_mode == NL80211_IFTYPE_AP) iwl3945_activate_qos(priv, 1); else if (priv->assoc_id && iwl3945_is_associated(priv)) iwl3945_activate_qos(priv, 0); @@ -7182,8 +7225,6 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw) iwl3945_reset_qos(priv); - cancel_delayed_work(&priv->post_associate); - spin_lock_irqsave(&priv->lock, flags); priv->assoc_id = 0; priv->assoc_capability = 0; @@ -7198,7 +7239,7 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw) priv->beacon_int = priv->hw->conf.beacon_int; priv->timestamp1 = 0; priv->timestamp0 = 0; - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) + if ((priv->iw_mode == NL80211_IFTYPE_STATION)) priv->beacon_int = 0; spin_unlock_irqrestore(&priv->lock, flags); @@ -7212,14 +7253,14 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw) /* we are restarting association process * clear RXON_FILTER_ASSOC_MSK bit */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + if (priv->iw_mode != NL80211_IFTYPE_AP) { iwl3945_scan_cancel_timeout(priv, 100); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl3945_commit_rxon(priv); } /* Per mac80211.h: This is only used in IBSS mode... */ - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { IWL_DEBUG_MAC80211("leave - not in IBSS\n"); mutex_unlock(&priv->mutex); @@ -7248,7 +7289,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk return -EIO; } - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { IWL_DEBUG_MAC80211("leave - not IBSS\n"); mutex_unlock(&priv->mutex); return -EIO; @@ -7268,7 +7309,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk iwl3945_reset_qos(priv); - queue_work(priv->workqueue, &priv->post_associate.work); + iwl3945_post_associate(priv); mutex_unlock(&priv->mutex); @@ -7329,15 +7370,6 @@ static ssize_t show_temperature(struct device *d, static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); -static ssize_t show_rs_window(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct iwl3945_priv *priv = d->driver_data; - return iwl3945_fill_rs_info(priv->hw, buf, IWL_AP_ID); -} -static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL); - static ssize_t show_tx_power(struct device *d, struct device_attribute *attr, char *buf) { @@ -7767,7 +7799,6 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv) INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill); INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor); - INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate); INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check); @@ -7785,7 +7816,6 @@ static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv) cancel_delayed_work_sync(&priv->init_alive_start); cancel_delayed_work(&priv->scan_check); cancel_delayed_work(&priv->alive_start); - cancel_delayed_work(&priv->post_associate); cancel_work_sync(&priv->beacon_update); } @@ -7801,7 +7831,6 @@ static struct attribute *iwl3945_sysfs_entries[] = { #endif &dev_attr_power_level.attr, &dev_attr_retry_rate.attr, - &dev_attr_rs_window.attr, &dev_attr_statistics.attr, &dev_attr_status.attr, &dev_attr_temperature.attr, @@ -7830,6 +7859,7 @@ static struct ieee80211_ops iwl3945_hw_ops = { .conf_tx = iwl3945_mac_conf_tx, .get_tsf = iwl3945_mac_get_tsf, .reset_tsf = iwl3945_mac_reset_tsf, + .bss_info_changed = iwl3945_bss_info_changed, .hw_scan = iwl3945_mac_hw_scan }; @@ -7868,6 +7898,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e SET_IEEE80211_DEV(hw, &pdev->dev); hw->rate_control_algorithm = "iwl-3945-rs"; + hw->sta_data_size = sizeof(struct iwl3945_sta_priv); IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); priv = hw->priv; @@ -7890,6 +7921,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + /* 4 EDCA QOS priorities */ hw->queues = 4; @@ -7951,7 +7987,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e IWL_DEBUG_INFO("Radio disabled.\n"); } - priv->iw_mode = IEEE80211_IF_TYPE_STA; + priv->iw_mode = NL80211_IFTYPE_STATION; printk(KERN_INFO DRV_NAME ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); @@ -8331,6 +8367,8 @@ static void __exit iwl3945_exit(void) iwl3945_rate_control_unregister(); } +MODULE_FIRMWARE("iwlwifi-3945" IWL3945_UCODE_API ".ucode"); + module_param_named(antenna, iwl3945_param_antenna, int, 0444); MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); module_param_named(disable, iwl3945_param_disable, int, 0444); diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index a267d6e65f0..92be60415d0 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -8,6 +8,7 @@ #include "scan.h" #include "cmd.h" +static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp); static const u8 bssid_any[ETH_ALEN] __attribute__ ((aligned (2))) = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; @@ -20,12 +21,88 @@ static const u8 bssid_off[ETH_ALEN] __attribute__ ((aligned (2))) = #define CAPINFO_MASK (~(0xda00)) +/** + * @brief This function finds common rates between rates and card rates. + * + * It will fill common rates in rates as output if found. + * + * NOTE: Setting the MSB of the basic rates need to be taken + * care, either before or after calling this function + * + * @param priv A pointer to struct lbs_private structure + * @param rates the buffer which keeps input and output + * @param rates_size the size of rate1 buffer; new size of buffer on return + * + * @return 0 on success, or -1 on error + */ +static int get_common_rates(struct lbs_private *priv, + u8 *rates, + u16 *rates_size) +{ + u8 *card_rates = lbs_bg_rates; + size_t num_card_rates = sizeof(lbs_bg_rates); + int ret = 0, i, j; + u8 tmp[30]; + size_t tmp_size = 0; + + /* For each rate in card_rates that exists in rate1, copy to tmp */ + for (i = 0; card_rates[i] && (i < num_card_rates); i++) { + for (j = 0; rates[j] && (j < *rates_size); j++) { + if (rates[j] == card_rates[i]) + tmp[tmp_size++] = card_rates[i]; + } + } + + lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); + lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates); + lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size); + lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); + + if (!priv->enablehwauto) { + for (i = 0; i < tmp_size; i++) { + if (tmp[i] == priv->cur_rate) + goto done; + } + lbs_pr_alert("Previously set fixed data rate %#x isn't " + "compatible with the network.\n", priv->cur_rate); + ret = -1; + goto done; + } + ret = 0; + +done: + memset(rates, 0, *rates_size); + *rates_size = min_t(int, tmp_size, *rates_size); + memcpy(rates, tmp, *rates_size); + return ret; +} + + +/** + * @brief Sets the MSB on basic rates as the firmware requires + * + * Scan through an array and set the MSB for basic data rates. + * + * @param rates buffer of data rates + * @param len size of buffer + */ +static void lbs_set_basic_rate_flags(u8 *rates, size_t len) +{ + int i; + + for (i = 0; i < len; i++) { + if (rates[i] == 0x02 || rates[i] == 0x04 || + rates[i] == 0x0b || rates[i] == 0x16) + rates[i] |= 0x80; + } +} + /** * @brief Associate to a specific BSS discovered in a scan * * @param priv A pointer to struct lbs_private structure - * @param pbssdesc Pointer to the BSS descriptor to associate with. + * @param assoc_req The association request describing the BSS to associate with * * @return 0-success, otherwise fail */ @@ -33,29 +110,29 @@ static int lbs_associate(struct lbs_private *priv, struct assoc_request *assoc_req) { int ret; + u8 preamble = RADIO_PREAMBLE_LONG; lbs_deb_enter(LBS_DEB_ASSOC); ret = lbs_prepare_and_send_command(priv, CMD_802_11_AUTHENTICATE, 0, CMD_OPTION_WAITFORRSP, 0, assoc_req->bss.bssid); - if (ret) - goto done; + goto out; - /* set preamble to firmware */ + /* Use short preamble only when both the BSS and firmware support it */ if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && (assoc_req->bss.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) - priv->preamble = CMD_TYPE_SHORT_PREAMBLE; - else - priv->preamble = CMD_TYPE_LONG_PREAMBLE; + preamble = RADIO_PREAMBLE_SHORT; - lbs_set_radio_control(priv); + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; ret = lbs_prepare_and_send_command(priv, CMD_802_11_ASSOCIATE, 0, CMD_OPTION_WAITFORRSP, 0, assoc_req); -done: +out: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } @@ -64,17 +141,22 @@ done: * @brief Join an adhoc network found in a previous scan * * @param priv A pointer to struct lbs_private structure - * @param pbssdesc Pointer to a BSS descriptor found in a previous scan - * to attempt to join + * @param assoc_req The association request describing the BSS to join * - * @return 0--success, -1--fail + * @return 0 on success, error on failure */ -static int lbs_join_adhoc_network(struct lbs_private *priv, +static int lbs_adhoc_join(struct lbs_private *priv, struct assoc_request *assoc_req) { + struct cmd_ds_802_11_ad_hoc_join cmd; struct bss_descriptor *bss = &assoc_req->bss; + u8 preamble = RADIO_PREAMBLE_LONG; + DECLARE_MAC_BUF(mac); + u16 ratesize = 0; int ret = 0; + lbs_deb_enter(LBS_DEB_ASSOC); + lbs_deb_join("current SSID '%s', ssid length %u\n", escape_essid(priv->curbssparams.ssid, priv->curbssparams.ssid_len), @@ -106,29 +188,106 @@ static int lbs_join_adhoc_network(struct lbs_private *priv, goto out; } - /* Use shortpreamble only when both creator and card supports - short preamble */ - if (!(bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) || - !(priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) { - lbs_deb_join("AdhocJoin: Long preamble\n"); - priv->preamble = CMD_TYPE_LONG_PREAMBLE; - } else { + /* Use short preamble only when both the BSS and firmware support it */ + if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && + (bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) { lbs_deb_join("AdhocJoin: Short preamble\n"); - priv->preamble = CMD_TYPE_SHORT_PREAMBLE; + preamble = RADIO_PREAMBLE_SHORT; } - lbs_set_radio_control(priv); + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; lbs_deb_join("AdhocJoin: channel = %d\n", assoc_req->channel); lbs_deb_join("AdhocJoin: band = %c\n", assoc_req->band); priv->adhoccreate = 0; + priv->curbssparams.channel = bss->channel; - ret = lbs_prepare_and_send_command(priv, CMD_802_11_AD_HOC_JOIN, - 0, CMD_OPTION_WAITFORRSP, - OID_802_11_SSID, assoc_req); + /* Build the join command */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + + cmd.bss.type = CMD_BSS_TYPE_IBSS; + cmd.bss.beaconperiod = cpu_to_le16(bss->beaconperiod); + + memcpy(&cmd.bss.bssid, &bss->bssid, ETH_ALEN); + memcpy(&cmd.bss.ssid, &bss->ssid, bss->ssid_len); + + memcpy(&cmd.bss.phyparamset, &bss->phyparamset, + sizeof(union ieeetypes_phyparamset)); + + memcpy(&cmd.bss.ssparamset, &bss->ssparamset, + sizeof(union IEEEtypes_ssparamset)); + + cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); + lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n", + bss->capability, CAPINFO_MASK); + + /* information on BSSID descriptor passed to FW */ + lbs_deb_join("ADHOC_J_CMD: BSSID = %s, SSID = '%s'\n", + print_mac(mac, cmd.bss.bssid), cmd.bss.ssid); + + /* Only v8 and below support setting these */ + if (priv->fwrelease < 0x09000000) { + /* failtimeout */ + cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); + /* probedelay */ + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + } + + /* Copy Data rates from the rates recorded in scan response */ + memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates)); + ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES); + memcpy(cmd.bss.rates, bss->rates, ratesize); + if (get_common_rates(priv, cmd.bss.rates, &ratesize)) { + lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n"); + ret = -1; + goto out; + } + + /* Copy the ad-hoc creation rates into Current BSS state structure */ + memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); + memcpy(&priv->curbssparams.rates, cmd.bss.rates, ratesize); + + /* Set MSB on basic rates as the firmware requires, but _after_ + * copying to current bss rates. + */ + lbs_set_basic_rate_flags(cmd.bss.rates, ratesize); + + cmd.bss.ssparamset.ibssparamset.atimwindow = cpu_to_le16(bss->atimwindow); + + if (assoc_req->secinfo.wep_enabled) { + u16 tmp = le16_to_cpu(cmd.bss.capability); + tmp |= WLAN_CAPABILITY_PRIVACY; + cmd.bss.capability = cpu_to_le16(tmp); + } + + if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { + __le32 local_ps_mode = cpu_to_le32(LBS802_11POWERMODECAM); + + /* wake up first */ + ret = lbs_prepare_and_send_command(priv, CMD_802_11_PS_MODE, + CMD_ACT_SET, 0, 0, + &local_ps_mode); + if (ret) { + ret = -1; + goto out; + } + } + + if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { + ret = -1; + goto out; + } + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); + if (ret == 0) + ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd); out: + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } @@ -136,39 +295,131 @@ out: * @brief Start an Adhoc Network * * @param priv A pointer to struct lbs_private structure - * @param adhocssid The ssid of the Adhoc Network - * @return 0--success, -1--fail + * @param assoc_req The association request describing the BSS to start + * + * @return 0 on success, error on failure */ -static int lbs_start_adhoc_network(struct lbs_private *priv, +static int lbs_adhoc_start(struct lbs_private *priv, struct assoc_request *assoc_req) { + struct cmd_ds_802_11_ad_hoc_start cmd; + u8 preamble = RADIO_PREAMBLE_LONG; + size_t ratesize = 0; + u16 tmpcap = 0; int ret = 0; - priv->adhoccreate = 1; + lbs_deb_enter(LBS_DEB_ASSOC); if (priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) { - lbs_deb_join("AdhocStart: Short preamble\n"); - priv->preamble = CMD_TYPE_SHORT_PREAMBLE; - } else { - lbs_deb_join("AdhocStart: Long preamble\n"); - priv->preamble = CMD_TYPE_LONG_PREAMBLE; + lbs_deb_join("ADHOC_START: Will use short preamble\n"); + preamble = RADIO_PREAMBLE_SHORT; } - lbs_set_radio_control(priv); + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; - lbs_deb_join("AdhocStart: channel = %d\n", assoc_req->channel); - lbs_deb_join("AdhocStart: band = %d\n", assoc_req->band); + /* Build the start command */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - ret = lbs_prepare_and_send_command(priv, CMD_802_11_AD_HOC_START, - 0, CMD_OPTION_WAITFORRSP, 0, assoc_req); + memcpy(cmd.ssid, assoc_req->ssid, assoc_req->ssid_len); + + lbs_deb_join("ADHOC_START: SSID '%s', ssid length %u\n", + escape_essid(assoc_req->ssid, assoc_req->ssid_len), + assoc_req->ssid_len); + + cmd.bsstype = CMD_BSS_TYPE_IBSS; + + if (priv->beacon_period == 0) + priv->beacon_period = MRVDRV_BEACON_INTERVAL; + cmd.beaconperiod = cpu_to_le16(priv->beacon_period); + + WARN_ON(!assoc_req->channel); + + /* set Physical parameter set */ + cmd.phyparamset.dsparamset.elementid = MFIE_TYPE_DS_SET; + cmd.phyparamset.dsparamset.len = 1; + cmd.phyparamset.dsparamset.currentchan = assoc_req->channel; + + /* set IBSS parameter set */ + cmd.ssparamset.ibssparamset.elementid = MFIE_TYPE_IBSS_SET; + cmd.ssparamset.ibssparamset.len = 2; + cmd.ssparamset.ibssparamset.atimwindow = 0; + + /* set capability info */ + tmpcap = WLAN_CAPABILITY_IBSS; + if (assoc_req->secinfo.wep_enabled) { + lbs_deb_join("ADHOC_START: WEP enabled, setting privacy on\n"); + tmpcap |= WLAN_CAPABILITY_PRIVACY; + } else + lbs_deb_join("ADHOC_START: WEP disabled, setting privacy off\n"); + + cmd.capability = cpu_to_le16(tmpcap); + + /* Only v8 and below support setting probe delay */ + if (priv->fwrelease < 0x09000000) + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + + ratesize = min(sizeof(cmd.rates), sizeof(lbs_bg_rates)); + memcpy(cmd.rates, lbs_bg_rates, ratesize); + + /* Copy the ad-hoc creating rates into Current BSS state structure */ + memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); + memcpy(&priv->curbssparams.rates, &cmd.rates, ratesize); + /* Set MSB on basic rates as the firmware requires, but _after_ + * copying to current bss rates. + */ + lbs_set_basic_rate_flags(cmd.rates, ratesize); + + lbs_deb_join("ADHOC_START: rates=%02x %02x %02x %02x\n", + cmd.rates[0], cmd.rates[1], cmd.rates[2], cmd.rates[3]); + + if (lbs_create_dnld_countryinfo_11d(priv)) { + lbs_deb_join("ADHOC_START: dnld_countryinfo_11d failed\n"); + ret = -1; + goto out; + } + + lbs_deb_join("ADHOC_START: Starting Ad-Hoc BSS on channel %d, band %d\n", + assoc_req->channel, assoc_req->band); + + priv->adhoccreate = 1; + priv->mode = IW_MODE_ADHOC; + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); + if (ret == 0) + ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd); + +out: + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } -int lbs_stop_adhoc_network(struct lbs_private *priv) +/** + * @brief Stop and Ad-Hoc network and exit Ad-Hoc mode + * + * @param priv A pointer to struct lbs_private structure + * @return 0 on success, or an error + */ +int lbs_adhoc_stop(struct lbs_private *priv) { - return lbs_prepare_and_send_command(priv, CMD_802_11_AD_HOC_STOP, - 0, CMD_OPTION_WAITFORRSP, 0, NULL); + struct cmd_ds_802_11_ad_hoc_stop cmd; + int ret; + + lbs_deb_enter(LBS_DEB_JOIN); + + memset(&cmd, 0, sizeof (cmd)); + cmd.hdr.size = cpu_to_le16 (sizeof (cmd)); + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); + + /* Clean up everything even if there was an error */ + lbs_mac_event_disconnected(priv); + + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); + return ret; } static inline int match_bss_no_security(struct lbs_802_11_security *secinfo, @@ -480,14 +731,14 @@ static int assoc_helper_essid(struct lbs_private *priv, if (bss != NULL) { lbs_deb_assoc("SSID found, will join\n"); memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); - lbs_join_adhoc_network(priv, assoc_req); + lbs_adhoc_join(priv, assoc_req); } else { /* else send START command */ lbs_deb_assoc("SSID not found, creating adhoc network\n"); memcpy(&assoc_req->bss.ssid, &assoc_req->ssid, IW_ESSID_MAX_SIZE); assoc_req->bss.ssid_len = assoc_req->ssid_len; - lbs_start_adhoc_network(priv, assoc_req); + lbs_adhoc_start(priv, assoc_req); } } @@ -520,7 +771,7 @@ static int assoc_helper_bssid(struct lbs_private *priv, ret = lbs_associate(priv, assoc_req); lbs_deb_assoc("ASSOC: lbs_associate(bssid) returned %d\n", ret); } else if (assoc_req->mode == IW_MODE_ADHOC) { - lbs_join_adhoc_network(priv, assoc_req); + lbs_adhoc_join(priv, assoc_req); } out: @@ -572,11 +823,7 @@ static int assoc_helper_mode(struct lbs_private *priv, } priv->mode = assoc_req->mode; - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_SNMP_MIB, - 0, CMD_OPTION_WAITFORRSP, - OID_802_11_INFRASTRUCTURE_MODE, - /* Shoot me now */ (void *) (size_t) assoc_req->mode); + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, assoc_req->mode); done: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); @@ -1029,7 +1276,9 @@ void lbs_association_worker(struct work_struct *work) */ if (priv->mode == IW_MODE_INFRA) { if (should_deauth_infrastructure(priv, assoc_req)) { - ret = lbs_send_deauthentication(priv); + ret = lbs_cmd_80211_deauthenticate(priv, + priv->curbssparams.bssid, + WLAN_REASON_DEAUTH_LEAVING); if (ret) { lbs_deb_assoc("Deauthentication due to new " "configuration request failed: %d\n", @@ -1038,7 +1287,7 @@ void lbs_association_worker(struct work_struct *work) } } else if (priv->mode == IW_MODE_ADHOC) { if (should_stop_adhoc(priv, assoc_req)) { - ret = lbs_stop_adhoc_network(priv); + ret = lbs_adhoc_stop(priv); if (ret) { lbs_deb_assoc("Teardown of AdHoc network due to " "new configuration request failed: %d\n", @@ -1214,94 +1463,6 @@ struct assoc_request *lbs_get_association_request(struct lbs_private *priv) /** - * @brief This function finds common rates between rate1 and card rates. - * - * It will fill common rates in rate1 as output if found. - * - * NOTE: Setting the MSB of the basic rates need to be taken - * care, either before or after calling this function - * - * @param priv A pointer to struct lbs_private structure - * @param rate1 the buffer which keeps input and output - * @param rate1_size the size of rate1 buffer; new size of buffer on return - * - * @return 0 or -1 - */ -static int get_common_rates(struct lbs_private *priv, - u8 *rates, - u16 *rates_size) -{ - u8 *card_rates = lbs_bg_rates; - size_t num_card_rates = sizeof(lbs_bg_rates); - int ret = 0, i, j; - u8 tmp[30]; - size_t tmp_size = 0; - - /* For each rate in card_rates that exists in rate1, copy to tmp */ - for (i = 0; card_rates[i] && (i < num_card_rates); i++) { - for (j = 0; rates[j] && (j < *rates_size); j++) { - if (rates[j] == card_rates[i]) - tmp[tmp_size++] = card_rates[i]; - } - } - - lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); - lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates); - lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size); - lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); - - if (!priv->enablehwauto) { - for (i = 0; i < tmp_size; i++) { - if (tmp[i] == priv->cur_rate) - goto done; - } - lbs_pr_alert("Previously set fixed data rate %#x isn't " - "compatible with the network.\n", priv->cur_rate); - ret = -1; - goto done; - } - ret = 0; - -done: - memset(rates, 0, *rates_size); - *rates_size = min_t(int, tmp_size, *rates_size); - memcpy(rates, tmp, *rates_size); - return ret; -} - - -/** - * @brief Sets the MSB on basic rates as the firmware requires - * - * Scan through an array and set the MSB for basic data rates. - * - * @param rates buffer of data rates - * @param len size of buffer - */ -static void lbs_set_basic_rate_flags(u8 *rates, size_t len) -{ - int i; - - for (i = 0; i < len; i++) { - if (rates[i] == 0x02 || rates[i] == 0x04 || - rates[i] == 0x0b || rates[i] == 0x16) - rates[i] |= 0x80; - } -} - -/** - * @brief Send Deauthentication Request - * - * @param priv A pointer to struct lbs_private structure - * @return 0--success, -1--fail - */ -int lbs_send_deauthentication(struct lbs_private *priv) -{ - return lbs_prepare_and_send_command(priv, CMD_802_11_DEAUTHENTICATE, - 0, CMD_OPTION_WAITFORRSP, 0, NULL); -} - -/** * @brief This function prepares command of authenticate. * * @param priv A pointer to struct lbs_private structure @@ -1353,26 +1514,37 @@ out: return ret; } -int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, - struct cmd_ds_command *cmd) +/** + * @brief Deauthenticate from a specific BSS + * + * @param priv A pointer to struct lbs_private structure + * @param bssid The specific BSS to deauthenticate from + * @param reason The 802.11 sec. 7.3.1.7 Reason Code for deauthenticating + * + * @return 0 on success, error on failure + */ +int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN], + u16 reason) { - struct cmd_ds_802_11_deauthenticate *dauth = &cmd->params.deauth; + struct cmd_ds_802_11_deauthenticate cmd; + int ret; lbs_deb_enter(LBS_DEB_JOIN); - cmd->command = cpu_to_le16(CMD_802_11_DEAUTHENTICATE); - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_deauthenticate) + - S_DS_GEN); + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.macaddr, &bssid[0], ETH_ALEN); + cmd.reasoncode = cpu_to_le16(reason); - /* set AP MAC address */ - memmove(dauth->macaddr, priv->curbssparams.bssid, ETH_ALEN); + ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd); - /* Reason code 3 = Station is leaving */ -#define REASON_CODE_STA_LEAVING 3 - dauth->reasoncode = cpu_to_le16(REASON_CODE_STA_LEAVING); + /* Clean up everything even if there was an error; can't assume that + * we're still authenticated to the AP after trying to deauth. + */ + lbs_mac_event_disconnected(priv); lbs_deb_leave(LBS_DEB_JOIN); - return 0; + return ret; } int lbs_cmd_80211_associate(struct lbs_private *priv, @@ -1489,231 +1661,6 @@ done: return ret; } -int lbs_cmd_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *cmd, void *pdata_buf) -{ - struct cmd_ds_802_11_ad_hoc_start *adhs = &cmd->params.ads; - int ret = 0; - int cmdappendsize = 0; - struct assoc_request *assoc_req = pdata_buf; - u16 tmpcap = 0; - size_t ratesize = 0; - - lbs_deb_enter(LBS_DEB_JOIN); - - if (!priv) { - ret = -1; - goto done; - } - - cmd->command = cpu_to_le16(CMD_802_11_AD_HOC_START); - - /* - * Fill in the parameters for 2 data structures: - * 1. cmd_ds_802_11_ad_hoc_start command - * 2. priv->scantable[i] - * - * Driver will fill up SSID, bsstype,IBSS param, Physical Param, - * probe delay, and cap info. - * - * Firmware will fill up beacon period, DTIM, Basic rates - * and operational rates. - */ - - memset(adhs->ssid, 0, IW_ESSID_MAX_SIZE); - memcpy(adhs->ssid, assoc_req->ssid, assoc_req->ssid_len); - - lbs_deb_join("ADHOC_S_CMD: SSID '%s', ssid length %u\n", - escape_essid(assoc_req->ssid, assoc_req->ssid_len), - assoc_req->ssid_len); - - /* set the BSS type */ - adhs->bsstype = CMD_BSS_TYPE_IBSS; - priv->mode = IW_MODE_ADHOC; - if (priv->beacon_period == 0) - priv->beacon_period = MRVDRV_BEACON_INTERVAL; - adhs->beaconperiod = cpu_to_le16(priv->beacon_period); - - /* set Physical param set */ -#define DS_PARA_IE_ID 3 -#define DS_PARA_IE_LEN 1 - - adhs->phyparamset.dsparamset.elementid = DS_PARA_IE_ID; - adhs->phyparamset.dsparamset.len = DS_PARA_IE_LEN; - - WARN_ON(!assoc_req->channel); - - lbs_deb_join("ADHOC_S_CMD: Creating ADHOC on channel %d\n", - assoc_req->channel); - - adhs->phyparamset.dsparamset.currentchan = assoc_req->channel; - - /* set IBSS param set */ -#define IBSS_PARA_IE_ID 6 -#define IBSS_PARA_IE_LEN 2 - - adhs->ssparamset.ibssparamset.elementid = IBSS_PARA_IE_ID; - adhs->ssparamset.ibssparamset.len = IBSS_PARA_IE_LEN; - adhs->ssparamset.ibssparamset.atimwindow = 0; - - /* set capability info */ - tmpcap = WLAN_CAPABILITY_IBSS; - if (assoc_req->secinfo.wep_enabled) { - lbs_deb_join("ADHOC_S_CMD: WEP enabled, " - "setting privacy on\n"); - tmpcap |= WLAN_CAPABILITY_PRIVACY; - } else { - lbs_deb_join("ADHOC_S_CMD: WEP disabled, " - "setting privacy off\n"); - } - adhs->capability = cpu_to_le16(tmpcap); - - /* probedelay */ - adhs->probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); - - memset(adhs->rates, 0, sizeof(adhs->rates)); - ratesize = min(sizeof(adhs->rates), sizeof(lbs_bg_rates)); - memcpy(adhs->rates, lbs_bg_rates, ratesize); - - /* Copy the ad-hoc creating rates into Current BSS state structure */ - memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); - memcpy(&priv->curbssparams.rates, &adhs->rates, ratesize); - - /* Set MSB on basic rates as the firmware requires, but _after_ - * copying to current bss rates. - */ - lbs_set_basic_rate_flags(adhs->rates, ratesize); - - lbs_deb_join("ADHOC_S_CMD: rates=%02x %02x %02x %02x \n", - adhs->rates[0], adhs->rates[1], adhs->rates[2], adhs->rates[3]); - - lbs_deb_join("ADHOC_S_CMD: AD HOC Start command is ready\n"); - - if (lbs_create_dnld_countryinfo_11d(priv)) { - lbs_deb_join("ADHOC_S_CMD: dnld_countryinfo_11d failed\n"); - ret = -1; - goto done; - } - - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ad_hoc_start) + - S_DS_GEN + cmdappendsize); - - ret = 0; -done: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - -int lbs_cmd_80211_ad_hoc_stop(struct cmd_ds_command *cmd) -{ - cmd->command = cpu_to_le16(CMD_802_11_AD_HOC_STOP); - cmd->size = cpu_to_le16(S_DS_GEN); - - return 0; -} - -int lbs_cmd_80211_ad_hoc_join(struct lbs_private *priv, - struct cmd_ds_command *cmd, void *pdata_buf) -{ - struct cmd_ds_802_11_ad_hoc_join *join_cmd = &cmd->params.adj; - struct assoc_request *assoc_req = pdata_buf; - struct bss_descriptor *bss = &assoc_req->bss; - int cmdappendsize = 0; - int ret = 0; - u16 ratesize = 0; - DECLARE_MAC_BUF(mac); - - lbs_deb_enter(LBS_DEB_JOIN); - - cmd->command = cpu_to_le16(CMD_802_11_AD_HOC_JOIN); - - join_cmd->bss.type = CMD_BSS_TYPE_IBSS; - join_cmd->bss.beaconperiod = cpu_to_le16(bss->beaconperiod); - - memcpy(&join_cmd->bss.bssid, &bss->bssid, ETH_ALEN); - memcpy(&join_cmd->bss.ssid, &bss->ssid, bss->ssid_len); - - memcpy(&join_cmd->bss.phyparamset, &bss->phyparamset, - sizeof(union ieeetypes_phyparamset)); - - memcpy(&join_cmd->bss.ssparamset, &bss->ssparamset, - sizeof(union IEEEtypes_ssparamset)); - - join_cmd->bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); - lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n", - bss->capability, CAPINFO_MASK); - - /* information on BSSID descriptor passed to FW */ - lbs_deb_join( - "ADHOC_J_CMD: BSSID = %s, SSID = '%s'\n", - print_mac(mac, join_cmd->bss.bssid), - join_cmd->bss.ssid); - - /* failtimeout */ - join_cmd->failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); - - /* probedelay */ - join_cmd->probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); - - priv->curbssparams.channel = bss->channel; - - /* Copy Data rates from the rates recorded in scan response */ - memset(join_cmd->bss.rates, 0, sizeof(join_cmd->bss.rates)); - ratesize = min_t(u16, sizeof(join_cmd->bss.rates), MAX_RATES); - memcpy(join_cmd->bss.rates, bss->rates, ratesize); - if (get_common_rates(priv, join_cmd->bss.rates, &ratesize)) { - lbs_deb_join("ADHOC_J_CMD: get_common_rates returns error.\n"); - ret = -1; - goto done; - } - - /* Copy the ad-hoc creating rates into Current BSS state structure */ - memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); - memcpy(&priv->curbssparams.rates, join_cmd->bss.rates, ratesize); - - /* Set MSB on basic rates as the firmware requires, but _after_ - * copying to current bss rates. - */ - lbs_set_basic_rate_flags(join_cmd->bss.rates, ratesize); - - join_cmd->bss.ssparamset.ibssparamset.atimwindow = - cpu_to_le16(bss->atimwindow); - - if (assoc_req->secinfo.wep_enabled) { - u16 tmp = le16_to_cpu(join_cmd->bss.capability); - tmp |= WLAN_CAPABILITY_PRIVACY; - join_cmd->bss.capability = cpu_to_le16(tmp); - } - - if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { - /* wake up first */ - __le32 Localpsmode; - - Localpsmode = cpu_to_le32(LBS802_11POWERMODECAM); - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_PS_MODE, - CMD_ACT_SET, - 0, 0, &Localpsmode); - - if (ret) { - ret = -1; - goto done; - } - } - - if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { - ret = -1; - goto done; - } - - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ad_hoc_join) + - S_DS_GEN + cmdappendsize); - -done: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - int lbs_ret_80211_associate(struct lbs_private *priv, struct cmd_ds_command *resp) { @@ -1815,34 +1762,19 @@ done: return ret; } -int lbs_ret_80211_disassociate(struct lbs_private *priv) -{ - lbs_deb_enter(LBS_DEB_JOIN); - - lbs_mac_event_disconnected(priv); - - lbs_deb_leave(LBS_DEB_JOIN); - return 0; -} - -int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *resp) +static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp) { int ret = 0; u16 command = le16_to_cpu(resp->command); u16 result = le16_to_cpu(resp->result); - struct cmd_ds_802_11_ad_hoc_result *padhocresult; + struct cmd_ds_802_11_ad_hoc_result *adhoc_resp; union iwreq_data wrqu; struct bss_descriptor *bss; DECLARE_MAC_BUF(mac); lbs_deb_enter(LBS_DEB_JOIN); - padhocresult = &resp->params.result; - - lbs_deb_join("ADHOC_RESP: size = %d\n", le16_to_cpu(resp->size)); - lbs_deb_join("ADHOC_RESP: command = %x\n", command); - lbs_deb_join("ADHOC_RESP: result = %x\n", result); + adhoc_resp = (struct cmd_ds_802_11_ad_hoc_result *) resp; if (!priv->in_progress_assoc_req) { lbs_deb_join("ADHOC_RESP: no in-progress association " @@ -1856,26 +1788,19 @@ int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, * Join result code 0 --> SUCCESS */ if (result) { - lbs_deb_join("ADHOC_RESP: failed\n"); + lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result); if (priv->connect_status == LBS_CONNECTED) lbs_mac_event_disconnected(priv); ret = -1; goto done; } - /* - * Now the join cmd should be successful - * If BSSID has changed use SSID to compare instead of BSSID - */ - lbs_deb_join("ADHOC_RESP: associated to '%s'\n", - escape_essid(bss->ssid, bss->ssid_len)); - /* Send a Media Connected event, according to the Spec */ priv->connect_status = LBS_CONNECTED; if (command == CMD_RET(CMD_802_11_AD_HOC_START)) { /* Update the created network descriptor with the new BSSID */ - memcpy(bss->bssid, padhocresult->bssid, ETH_ALEN); + memcpy(bss->bssid, adhoc_resp->bssid, ETH_ALEN); } /* Set the BSSID from the joined/started descriptor */ @@ -1894,22 +1819,13 @@ int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, wrqu.ap_addr.sa_family = ARPHRD_ETHER; wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); - lbs_deb_join("ADHOC_RESP: - Joined/Started Ad Hoc\n"); - lbs_deb_join("ADHOC_RESP: channel = %d\n", priv->curbssparams.channel); - lbs_deb_join("ADHOC_RESP: BSSID = %s\n", - print_mac(mac, padhocresult->bssid)); + lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %s, channel %d\n", + escape_essid(bss->ssid, bss->ssid_len), + print_mac(mac, priv->curbssparams.bssid), + priv->curbssparams.channel); done: lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); return ret; } -int lbs_ret_80211_ad_hoc_stop(struct lbs_private *priv) -{ - lbs_deb_enter(LBS_DEB_JOIN); - - lbs_mac_event_disconnected(priv); - - lbs_deb_leave(LBS_DEB_JOIN); - return 0; -} diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h index c516fbe518f..8b7336dd02a 100644 --- a/drivers/net/wireless/libertas/assoc.h +++ b/drivers/net/wireless/libertas/assoc.h @@ -12,28 +12,18 @@ struct cmd_ds_command; int lbs_cmd_80211_authenticate(struct lbs_private *priv, struct cmd_ds_command *cmd, void *pdata_buf); -int lbs_cmd_80211_ad_hoc_join(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf); -int lbs_cmd_80211_ad_hoc_stop(struct cmd_ds_command *cmd); -int lbs_cmd_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf); + +int lbs_adhoc_stop(struct lbs_private *priv); + int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, - struct cmd_ds_command *cmd); + u8 bssid[ETH_ALEN], u16 reason); int lbs_cmd_80211_associate(struct lbs_private *priv, struct cmd_ds_command *cmd, void *pdata_buf); int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, struct cmd_ds_command *resp); -int lbs_ret_80211_ad_hoc_stop(struct lbs_private *priv); -int lbs_ret_80211_disassociate(struct lbs_private *priv); int lbs_ret_80211_associate(struct lbs_private *priv, struct cmd_ds_command *resp); -int lbs_stop_adhoc_network(struct lbs_private *priv); - -int lbs_send_deauthentication(struct lbs_private *priv); - #endif /* _LBS_ASSOC_H */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 75427e61898..a912fb68c09 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -480,181 +480,166 @@ int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action, return ret; } -static int lbs_cmd_802_11_reset(struct cmd_ds_command *cmd, int cmd_action) -{ - struct cmd_ds_802_11_reset *reset = &cmd->params.reset; - - lbs_deb_enter(LBS_DEB_CMD); - - cmd->command = cpu_to_le16(CMD_802_11_RESET); - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset) + S_DS_GEN); - reset->action = cpu_to_le16(cmd_action); - - lbs_deb_leave(LBS_DEB_CMD); - return 0; -} - -static int lbs_cmd_802_11_snmp_mib(struct lbs_private *priv, - struct cmd_ds_command *cmd, - int cmd_action, - int cmd_oid, void *pdata_buf) +/** + * @brief Set an SNMP MIB value + * + * @param priv A pointer to struct lbs_private structure + * @param oid The OID to set in the firmware + * @param val Value to set the OID to + * + * @return 0 on success, error on failure + */ +int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val) { - struct cmd_ds_802_11_snmp_mib *pSNMPMIB = &cmd->params.smib; - u8 ucTemp; + struct cmd_ds_802_11_snmp_mib cmd; + int ret; lbs_deb_enter(LBS_DEB_CMD); - lbs_deb_cmd("SNMP_CMD: cmd_oid = 0x%x\n", cmd_oid); - - cmd->command = cpu_to_le16(CMD_802_11_SNMP_MIB); - cmd->size = cpu_to_le16(sizeof(*pSNMPMIB) + S_DS_GEN); - - switch (cmd_oid) { - case OID_802_11_INFRASTRUCTURE_MODE: - { - u8 mode = (u8) (size_t) pdata_buf; - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_SET); - pSNMPMIB->oid = cpu_to_le16((u16) DESIRED_BSSTYPE_I); - pSNMPMIB->bufsize = cpu_to_le16(sizeof(u8)); - if (mode == IW_MODE_ADHOC) { - ucTemp = SNMP_MIB_VALUE_ADHOC; - } else { - /* Infra and Auto modes */ - ucTemp = SNMP_MIB_VALUE_INFRA; - } - - memmove(pSNMPMIB->value, &ucTemp, sizeof(u8)); + memset(&cmd, 0, sizeof (cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.oid = cpu_to_le16((u16) oid); + switch (oid) { + case SNMP_MIB_OID_BSS_TYPE: + cmd.bufsize = cpu_to_le16(sizeof(u8)); + cmd.value[0] = (val == IW_MODE_ADHOC) ? 2 : 1; break; + case SNMP_MIB_OID_11D_ENABLE: + case SNMP_MIB_OID_FRAG_THRESHOLD: + case SNMP_MIB_OID_RTS_THRESHOLD: + case SNMP_MIB_OID_SHORT_RETRY_LIMIT: + case SNMP_MIB_OID_LONG_RETRY_LIMIT: + cmd.bufsize = cpu_to_le16(sizeof(u16)); + *((__le16 *)(&cmd.value)) = cpu_to_le16(val); + break; + default: + lbs_deb_cmd("SNMP_CMD: (set) unhandled OID 0x%x\n", oid); + ret = -EINVAL; + goto out; } - case OID_802_11D_ENABLE: - { - u32 ulTemp; - - pSNMPMIB->oid = cpu_to_le16((u16) DOT11D_I); - - if (cmd_action == CMD_ACT_SET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_SET); - pSNMPMIB->bufsize = cpu_to_le16(sizeof(u16)); - ulTemp = *(u32 *)pdata_buf; - *((__le16 *)(pSNMPMIB->value)) = - cpu_to_le16((u16) ulTemp); - } - break; - } - - case OID_802_11_FRAGMENTATION_THRESHOLD: - { - u32 ulTemp; - - pSNMPMIB->oid = cpu_to_le16((u16) FRAGTHRESH_I); - - if (cmd_action == CMD_ACT_GET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_GET); - } else if (cmd_action == CMD_ACT_SET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_SET); - pSNMPMIB->bufsize = cpu_to_le16(sizeof(u16)); - ulTemp = *((u32 *) pdata_buf); - *((__le16 *)(pSNMPMIB->value)) = - cpu_to_le16((u16) ulTemp); + lbs_deb_cmd("SNMP_CMD: (set) oid 0x%x, oid size 0x%x, value 0x%x\n", + le16_to_cpu(cmd.oid), le16_to_cpu(cmd.bufsize), val); - } + ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); - break; - } +out: + lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); + return ret; +} - case OID_802_11_RTS_THRESHOLD: - { +/** + * @brief Get an SNMP MIB value + * + * @param priv A pointer to struct lbs_private structure + * @param oid The OID to retrieve from the firmware + * @param out_val Location for the returned value + * + * @return 0 on success, error on failure + */ +int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val) +{ + struct cmd_ds_802_11_snmp_mib cmd; + int ret; - u32 ulTemp; - pSNMPMIB->oid = cpu_to_le16(RTSTHRESH_I); + lbs_deb_enter(LBS_DEB_CMD); - if (cmd_action == CMD_ACT_GET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_GET); - } else if (cmd_action == CMD_ACT_SET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_SET); - pSNMPMIB->bufsize = cpu_to_le16(sizeof(u16)); - ulTemp = *((u32 *)pdata_buf); - *(__le16 *)(pSNMPMIB->value) = - cpu_to_le16((u16) ulTemp); + memset(&cmd, 0, sizeof (cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_GET); + cmd.oid = cpu_to_le16(oid); - } - break; - } - case OID_802_11_TX_RETRYCOUNT: - pSNMPMIB->oid = cpu_to_le16((u16) SHORT_RETRYLIM_I); - - if (cmd_action == CMD_ACT_GET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_GET); - } else if (cmd_action == CMD_ACT_SET) { - pSNMPMIB->querytype = cpu_to_le16(CMD_ACT_SET); - pSNMPMIB->bufsize = cpu_to_le16(sizeof(u16)); - *((__le16 *)(pSNMPMIB->value)) = - cpu_to_le16((u16) priv->txretrycount); - } + ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); + if (ret) + goto out; + switch (le16_to_cpu(cmd.bufsize)) { + case sizeof(u8): + if (oid == SNMP_MIB_OID_BSS_TYPE) { + if (cmd.value[0] == 2) + *out_val = IW_MODE_ADHOC; + else + *out_val = IW_MODE_INFRA; + } else + *out_val = cmd.value[0]; + break; + case sizeof(u16): + *out_val = le16_to_cpu(*((__le16 *)(&cmd.value))); break; default: + lbs_deb_cmd("SNMP_CMD: (get) unhandled OID 0x%x size %d\n", + oid, le16_to_cpu(cmd.bufsize)); break; } - lbs_deb_cmd( - "SNMP_CMD: command=0x%x, size=0x%x, seqnum=0x%x, result=0x%x\n", - le16_to_cpu(cmd->command), le16_to_cpu(cmd->size), - le16_to_cpu(cmd->seqnum), le16_to_cpu(cmd->result)); - - lbs_deb_cmd( - "SNMP_CMD: action 0x%x, oid 0x%x, oidsize 0x%x, value 0x%x\n", - le16_to_cpu(pSNMPMIB->querytype), le16_to_cpu(pSNMPMIB->oid), - le16_to_cpu(pSNMPMIB->bufsize), - le16_to_cpu(*(__le16 *) pSNMPMIB->value)); - - lbs_deb_leave(LBS_DEB_CMD); - return 0; +out: + lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); + return ret; } -static int lbs_cmd_802_11_rf_tx_power(struct cmd_ds_command *cmd, - u16 cmd_action, void *pdata_buf) +/** + * @brief Get the min, max, and current TX power + * + * @param priv A pointer to struct lbs_private structure + * @param curlevel Current power level in dBm + * @param minlevel Minimum supported power level in dBm (optional) + * @param maxlevel Maximum supported power level in dBm (optional) + * + * @return 0 on success, error on failure + */ +int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, + s16 *maxlevel) { - - struct cmd_ds_802_11_rf_tx_power *prtp = &cmd->params.txp; + struct cmd_ds_802_11_rf_tx_power cmd; + int ret; lbs_deb_enter(LBS_DEB_CMD); - cmd->size = - cpu_to_le16((sizeof(struct cmd_ds_802_11_rf_tx_power)) + S_DS_GEN); - cmd->command = cpu_to_le16(CMD_802_11_RF_TX_POWER); - prtp->action = cpu_to_le16(cmd_action); + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_GET); + + ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); + if (ret == 0) { + *curlevel = le16_to_cpu(cmd.curlevel); + if (minlevel) + *minlevel = le16_to_cpu(cmd.minlevel); + if (maxlevel) + *maxlevel = le16_to_cpu(cmd.maxlevel); + } - lbs_deb_cmd("RF_TX_POWER_CMD: size:%d cmd:0x%x Act:%d\n", - le16_to_cpu(cmd->size), le16_to_cpu(cmd->command), - le16_to_cpu(prtp->action)); + lbs_deb_leave(LBS_DEB_CMD); + return ret; +} - switch (cmd_action) { - case CMD_ACT_TX_POWER_OPT_GET: - prtp->action = cpu_to_le16(CMD_ACT_GET); - prtp->currentlevel = 0; - break; +/** + * @brief Set the TX power + * + * @param priv A pointer to struct lbs_private structure + * @param dbm The desired power level in dBm + * + * @return 0 on success, error on failure + */ +int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) +{ + struct cmd_ds_802_11_rf_tx_power cmd; + int ret; - case CMD_ACT_TX_POWER_OPT_SET_HIGH: - prtp->action = cpu_to_le16(CMD_ACT_SET); - prtp->currentlevel = cpu_to_le16(CMD_ACT_TX_POWER_INDEX_HIGH); - break; + lbs_deb_enter(LBS_DEB_CMD); - case CMD_ACT_TX_POWER_OPT_SET_MID: - prtp->action = cpu_to_le16(CMD_ACT_SET); - prtp->currentlevel = cpu_to_le16(CMD_ACT_TX_POWER_INDEX_MID); - break; + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.curlevel = cpu_to_le16(dbm); - case CMD_ACT_TX_POWER_OPT_SET_LOW: - prtp->action = cpu_to_le16(CMD_ACT_SET); - prtp->currentlevel = cpu_to_le16(*((u16 *) pdata_buf)); - break; - } + lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm); + + ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); lbs_deb_leave(LBS_DEB_CMD); - return 0; + return ret; } static int lbs_cmd_802_11_monitor_mode(struct cmd_ds_command *cmd, @@ -1033,9 +1018,9 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, return ret; } -int lbs_mesh_config_send(struct lbs_private *priv, - struct cmd_ds_mesh_config *cmd, - uint16_t action, uint16_t type) +static int __lbs_mesh_config_send(struct lbs_private *priv, + struct cmd_ds_mesh_config *cmd, + uint16_t action, uint16_t type) { int ret; @@ -1054,6 +1039,19 @@ int lbs_mesh_config_send(struct lbs_private *priv, return ret; } +int lbs_mesh_config_send(struct lbs_private *priv, + struct cmd_ds_mesh_config *cmd, + uint16_t action, uint16_t type) +{ + int ret; + + if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG)) + return -EOPNOTSUPP; + + ret = __lbs_mesh_config_send(priv, cmd, action, type); + return ret; +} + /* This function is the CMD_MESH_CONFIG legacy function. It only handles the * START and STOP actions. The extended actions supported by CMD_MESH_CONFIG * are all handled by preparing a struct cmd_ds_mesh_config and passing it to @@ -1095,7 +1093,7 @@ int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan) action, priv->mesh_tlv, chan, escape_essid(priv->mesh_ssid, priv->mesh_ssid_len)); - return lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv); + return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv); } static int lbs_cmd_bcn_ctrl(struct lbs_private * priv, @@ -1256,41 +1254,47 @@ void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd, priv->cur_cmd = NULL; } -int lbs_set_radio_control(struct lbs_private *priv) +int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on) { - int ret = 0; struct cmd_ds_802_11_radio_control cmd; + int ret = -EINVAL; lbs_deb_enter(LBS_DEB_CMD); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_ACT_SET); - switch (priv->preamble) { - case CMD_TYPE_SHORT_PREAMBLE: - cmd.control = cpu_to_le16(SET_SHORT_PREAMBLE); - break; - - case CMD_TYPE_LONG_PREAMBLE: - cmd.control = cpu_to_le16(SET_LONG_PREAMBLE); - break; + /* Only v8 and below support setting the preamble */ + if (priv->fwrelease < 0x09000000) { + switch (preamble) { + case RADIO_PREAMBLE_SHORT: + if (!(priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) + goto out; + /* Fall through */ + case RADIO_PREAMBLE_AUTO: + case RADIO_PREAMBLE_LONG: + cmd.control = cpu_to_le16(preamble); + break; + default: + goto out; + } + } - case CMD_TYPE_AUTO_PREAMBLE: - default: - cmd.control = cpu_to_le16(SET_AUTO_PREAMBLE); - break; + if (radio_on) + cmd.control |= cpu_to_le16(0x1); + else { + cmd.control &= cpu_to_le16(~0x1); + priv->txpower_cur = 0; } - if (priv->radioon) - cmd.control |= cpu_to_le16(TURN_ON_RF); - else - cmd.control &= cpu_to_le16(~TURN_ON_RF); + lbs_deb_cmd("RADIO_CONTROL: radio %s, preamble %d\n", + radio_on ? "ON" : "OFF", preamble); - lbs_deb_cmd("RADIO_SET: radio %d, preamble %d\n", priv->radioon, - priv->preamble); + priv->radio_on = radio_on; ret = lbs_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); +out: lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); return ret; } @@ -1380,55 +1384,25 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf); break; - case CMD_802_11_DEAUTHENTICATE: - ret = lbs_cmd_80211_deauthenticate(priv, cmdptr); - break; - - case CMD_802_11_AD_HOC_START: - ret = lbs_cmd_80211_ad_hoc_start(priv, cmdptr, pdata_buf); - break; - - case CMD_802_11_RESET: - ret = lbs_cmd_802_11_reset(cmdptr, cmd_action); - break; - case CMD_802_11_AUTHENTICATE: ret = lbs_cmd_80211_authenticate(priv, cmdptr, pdata_buf); break; - case CMD_802_11_SNMP_MIB: - ret = lbs_cmd_802_11_snmp_mib(priv, cmdptr, - cmd_action, cmd_oid, pdata_buf); - break; - case CMD_MAC_REG_ACCESS: case CMD_BBP_REG_ACCESS: case CMD_RF_REG_ACCESS: ret = lbs_cmd_reg_access(cmdptr, cmd_action, pdata_buf); break; - case CMD_802_11_RF_TX_POWER: - ret = lbs_cmd_802_11_rf_tx_power(cmdptr, - cmd_action, pdata_buf); - break; - case CMD_802_11_MONITOR_MODE: ret = lbs_cmd_802_11_monitor_mode(cmdptr, cmd_action, pdata_buf); break; - case CMD_802_11_AD_HOC_JOIN: - ret = lbs_cmd_80211_ad_hoc_join(priv, cmdptr, pdata_buf); - break; - case CMD_802_11_RSSI: ret = lbs_cmd_802_11_rssi(priv, cmdptr); break; - case CMD_802_11_AD_HOC_STOP: - ret = lbs_cmd_80211_ad_hoc_stop(cmdptr); - break; - case CMD_802_11_SET_AFC: case CMD_802_11_GET_AFC: @@ -1953,6 +1927,70 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) } +/** + * @brief Configures the transmission power control functionality. + * + * @param priv A pointer to struct lbs_private structure + * @param enable Transmission power control enable + * @param p0 Power level when link quality is good (dBm). + * @param p1 Power level when link quality is fair (dBm). + * @param p2 Power level when link quality is poor (dBm). + * @param usesnr Use Signal to Noise Ratio in TPC + * + * @return 0 on success + */ +int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, + int8_t p2, int usesnr) +{ + struct cmd_ds_802_11_tpc_cfg cmd; + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.enable = !!enable; + cmd.usesnr = !!usesnr; + cmd.P0 = p0; + cmd.P1 = p1; + cmd.P2 = p2; + + ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd); + + return ret; +} + +/** + * @brief Configures the power adaptation settings. + * + * @param priv A pointer to struct lbs_private structure + * @param enable Power adaptation enable + * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm). + * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm). + * @param p2 Power level for 48 and 54 Mbps (dBm). + * + * @return 0 on Success + */ + +int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, + int8_t p1, int8_t p2) +{ + struct cmd_ds_802_11_pa_cfg cmd; + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.enable = !!enable; + cmd.P0 = p0; + cmd.P1 = p1; + cmd.P2 = p2; + + ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd); + + return ret; +} + + static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, uint16_t command, struct cmd_header *in_cmd, int in_cmd_size, int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h index a53b51f8bdb..36be4c9703e 100644 --- a/drivers/net/wireless/libertas/cmd.h +++ b/drivers/net/wireless/libertas/cmd.h @@ -26,6 +26,18 @@ int __lbs_cmd(struct lbs_private *priv, uint16_t command, int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), unsigned long callback_arg); +int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, + int8_t p1, int8_t p2); + +int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, + int8_t p2, int usesnr); + +int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, + int8_t p1, int8_t p2); + +int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, + int8_t p2, int usesnr); + int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra, struct cmd_header *resp); @@ -61,4 +73,14 @@ int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action, int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action, struct assoc_request *assoc); +int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, + s16 *maxlevel); +int lbs_set_tx_power(struct lbs_private *priv, s16 dbm); + +int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on); + +int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val); + +int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val); + #endif /* _LBS_CMD_H */ diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index 24de3c3cf87..bcf2a9756fb 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -146,63 +146,6 @@ static int lbs_ret_reg_access(struct lbs_private *priv, return ret; } -static int lbs_ret_802_11_snmp_mib(struct lbs_private *priv, - struct cmd_ds_command *resp) -{ - struct cmd_ds_802_11_snmp_mib *smib = &resp->params.smib; - u16 oid = le16_to_cpu(smib->oid); - u16 querytype = le16_to_cpu(smib->querytype); - - lbs_deb_enter(LBS_DEB_CMD); - - lbs_deb_cmd("SNMP_RESP: oid 0x%x, querytype 0x%x\n", oid, - querytype); - lbs_deb_cmd("SNMP_RESP: Buf size %d\n", le16_to_cpu(smib->bufsize)); - - if (querytype == CMD_ACT_GET) { - switch (oid) { - case FRAGTHRESH_I: - priv->fragthsd = - le16_to_cpu(*((__le16 *)(smib->value))); - lbs_deb_cmd("SNMP_RESP: frag threshold %u\n", - priv->fragthsd); - break; - case RTSTHRESH_I: - priv->rtsthsd = - le16_to_cpu(*((__le16 *)(smib->value))); - lbs_deb_cmd("SNMP_RESP: rts threshold %u\n", - priv->rtsthsd); - break; - case SHORT_RETRYLIM_I: - priv->txretrycount = - le16_to_cpu(*((__le16 *)(smib->value))); - lbs_deb_cmd("SNMP_RESP: tx retry count %u\n", - priv->rtsthsd); - break; - default: - break; - } - } - - lbs_deb_enter(LBS_DEB_CMD); - return 0; -} - -static int lbs_ret_802_11_rf_tx_power(struct lbs_private *priv, - struct cmd_ds_command *resp) -{ - struct cmd_ds_802_11_rf_tx_power *rtp = &resp->params.txp; - - lbs_deb_enter(LBS_DEB_CMD); - - priv->txpowerlevel = le16_to_cpu(rtp->currentlevel); - - lbs_deb_cmd("TX power currently %d\n", priv->txpowerlevel); - - lbs_deb_leave(LBS_DEB_CMD); - return 0; -} - static int lbs_ret_802_11_rssi(struct lbs_private *priv, struct cmd_ds_command *resp) { @@ -273,24 +216,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, ret = lbs_ret_80211_associate(priv, resp); break; - case CMD_RET(CMD_802_11_DISASSOCIATE): - case CMD_RET(CMD_802_11_DEAUTHENTICATE): - ret = lbs_ret_80211_disassociate(priv); - break; - - case CMD_RET(CMD_802_11_AD_HOC_START): - case CMD_RET(CMD_802_11_AD_HOC_JOIN): - ret = lbs_ret_80211_ad_hoc_start(priv, resp); - break; - - case CMD_RET(CMD_802_11_SNMP_MIB): - ret = lbs_ret_802_11_snmp_mib(priv, resp); - break; - - case CMD_RET(CMD_802_11_RF_TX_POWER): - ret = lbs_ret_802_11_rf_tx_power(priv, resp); - break; - case CMD_RET(CMD_802_11_SET_AFC): case CMD_RET(CMD_802_11_GET_AFC): spin_lock_irqsave(&priv->driver_lock, flags); @@ -300,7 +225,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, break; - case CMD_RET(CMD_802_11_RESET): case CMD_RET(CMD_802_11_AUTHENTICATE): case CMD_RET(CMD_802_11_BEACON_STOP): break; @@ -309,10 +233,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, ret = lbs_ret_802_11_rssi(priv, resp); break; - case CMD_RET(CMD_802_11_AD_HOC_STOP): - ret = lbs_ret_80211_ad_hoc_stop(priv); - break; - case CMD_RET(CMD_802_11D_DOMAIN_INFO): ret = lbs_ret_802_11d_domain_info(resp); break; diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index a8ac974daca..1a8888ccead 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -34,7 +34,6 @@ int lbs_process_event(struct lbs_private *priv, u32 event); void lbs_queue_event(struct lbs_private *priv, u32 event); void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx); -int lbs_set_radio_control(struct lbs_private *priv); u32 lbs_fw_index_to_data_rate(u8 index); u8 lbs_data_rate_to_fw_index(u32 rate); diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h index 12e687550bc..076a636e8f6 100644 --- a/drivers/net/wireless/libertas/defs.h +++ b/drivers/net/wireless/libertas/defs.h @@ -189,6 +189,14 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define MRVDRV_CMD_UPLD_RDY 0x0008 #define MRVDRV_CARDEVENT 0x0010 +/* Automatic TX control default levels */ +#define POW_ADAPT_DEFAULT_P0 13 +#define POW_ADAPT_DEFAULT_P1 15 +#define POW_ADAPT_DEFAULT_P2 18 +#define TPC_DEFAULT_P0 5 +#define TPC_DEFAULT_P1 10 +#define TPC_DEFAULT_P2 13 + /** TxPD status */ /* Station firmware use TxPD status field to report final Tx transmit @@ -243,6 +251,9 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define CMD_F_HOSTCMD (1 << 0) #define FW_CAPINFO_WPA (1 << 0) +#define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13) +#define FW_CAPINFO_BOOT2_UPGRADE (1<<14) +#define FW_CAPINFO_PERSISTENT_CONFIG (1<<15) #define KEY_LEN_WPA_AES 16 #define KEY_LEN_WPA_TKIP 32 @@ -316,7 +327,8 @@ enum PS_STATE { enum DNLD_STATE { DNLD_RES_RECEIVED, DNLD_DATA_SENT, - DNLD_CMD_SENT + DNLD_CMD_SENT, + DNLD_BOOTCMD_SENT, }; /** LBS_MEDIA_STATE */ @@ -339,27 +351,6 @@ enum mv_ms_type { MVMS_EVENT }; -/** SNMP_MIB_INDEX_e */ -enum SNMP_MIB_INDEX_e { - DESIRED_BSSTYPE_I = 0, - OP_RATESET_I, - BCNPERIOD_I, - DTIMPERIOD_I, - ASSOCRSP_TIMEOUT_I, - RTSTHRESH_I, - SHORT_RETRYLIM_I, - LONG_RETRYLIM_I, - FRAGTHRESH_I, - DOT11D_I, - DOT11H_I, - MANUFID_I, - PRODID_I, - MANUF_OUI_I, - MANUF_NAME_I, - MANUF_PRODNAME_I, - MANUF_PRODVER_I, -}; - /** KEY_TYPE_ID */ enum KEY_TYPE_ID { KEY_TYPE_ID_WEP = 0, @@ -374,12 +365,6 @@ enum KEY_INFO_WPA { KEY_INFO_WPA_ENABLED = 0x04 }; -/** SNMP_MIB_VALUE_e */ -enum SNMP_MIB_VALUE_e { - SNMP_MIB_VALUE_INFRA = 1, - SNMP_MIB_VALUE_ADHOC -}; - /* Default values for fwt commands. */ #define FWT_DEFAULT_METRIC 0 #define FWT_DEFAULT_DIR 1 diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index f5bb40c54d8..f6f3753da30 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -58,6 +58,7 @@ struct lbs_802_11_security { u8 WPA2enabled; u8 wep_enabled; u8 auth_mode; + u32 key_mgmt; }; /** Current Basic Service Set State Structure */ @@ -240,9 +241,6 @@ struct lbs_private { uint16_t enablehwauto; uint16_t ratebitmap; - u32 fragthsd; - u32 rtsthsd; - u8 txretrycount; /** Tx-related variables (for single packet tx) */ @@ -253,7 +251,9 @@ struct lbs_private { u32 connect_status; u32 mesh_connect_status; u16 regioncode; - u16 txpowerlevel; + s16 txpower_cur; + s16 txpower_min; + s16 txpower_max; /** POWER MANAGEMENT AND PnP SUPPORT */ u8 surpriseremoved; @@ -291,8 +291,7 @@ struct lbs_private { u16 nextSNRNF; u16 numSNRNF; - u8 radioon; - u32 preamble; + u8 radio_on; /** data rate stuff */ u8 cur_rate; diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index c92e41b4faf..5004d7679c0 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -9,17 +9,6 @@ #define DEFAULT_AD_HOC_CHANNEL 6 #define DEFAULT_AD_HOC_CHANNEL_A 36 -/** IEEE 802.11 oids */ -#define OID_802_11_SSID 0x00008002 -#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008 -#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009 -#define OID_802_11_RTS_THRESHOLD 0x0000800A -#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D -#define OID_802_11_SUPPORTED_RATES 0x0000800E -#define OID_802_11_STATISTICS 0x00008012 -#define OID_802_11_TX_RETRYCOUNT 0x0000801D -#define OID_802_11D_ENABLE 0x00008020 - #define CMD_OPTION_WAITFORRSP 0x0002 /** Host command IDs */ @@ -61,7 +50,6 @@ #define CMD_RF_REG_MAP 0x0023 #define CMD_802_11_DEAUTHENTICATE 0x0024 #define CMD_802_11_REASSOCIATE 0x0025 -#define CMD_802_11_DISASSOCIATE 0x0026 #define CMD_MAC_CONTROL 0x0028 #define CMD_802_11_AD_HOC_START 0x002b #define CMD_802_11_AD_HOC_JOIN 0x002c @@ -84,6 +72,7 @@ #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 #define CMD_802_11_SLEEP_PERIOD 0x0068 #define CMD_802_11_TPC_CFG 0x0072 +#define CMD_802_11_PA_CFG 0x0073 #define CMD_802_11_FW_WAKE_METHOD 0x0074 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076 @@ -153,11 +142,6 @@ #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 -/* Define action or option for CMD_802_11_RADIO_CONTROL */ -#define CMD_TYPE_AUTO_PREAMBLE 0x0001 -#define CMD_TYPE_SHORT_PREAMBLE 0x0002 -#define CMD_TYPE_LONG_PREAMBLE 0x0003 - /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ #define CMD_SUBSCRIBE_RSSI_LOW 0x0001 #define CMD_SUBSCRIBE_SNR_LOW 0x0002 @@ -166,28 +150,14 @@ #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020 -#define TURN_ON_RF 0x01 -#define RADIO_ON 0x01 -#define RADIO_OFF 0x00 - -#define SET_AUTO_PREAMBLE 0x05 -#define SET_SHORT_PREAMBLE 0x03 -#define SET_LONG_PREAMBLE 0x01 +#define RADIO_PREAMBLE_LONG 0x00 +#define RADIO_PREAMBLE_SHORT 0x02 +#define RADIO_PREAMBLE_AUTO 0x04 /* Define action or option for CMD_802_11_RF_CHANNEL */ #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 -/* Define action or option for CMD_802_11_RF_TX_POWER */ -#define CMD_ACT_TX_POWER_OPT_GET 0x0000 -#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007 -#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004 -#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000 - -#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007 -#define CMD_ACT_TX_POWER_INDEX_MID 0x0004 -#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000 - /* Define action or option for CMD_802_11_DATA_RATE */ #define CMD_ACT_SET_TX_AUTO 0x0000 #define CMD_ACT_SET_TX_FIX_RATE 0x0001 @@ -210,6 +180,19 @@ #define CMD_WAKE_METHOD_COMMAND_INT 0x0001 #define CMD_WAKE_METHOD_GPIO 0x0002 +/* Object IDs for CMD_802_11_SNMP_MIB */ +#define SNMP_MIB_OID_BSS_TYPE 0x0000 +#define SNMP_MIB_OID_OP_RATE_SET 0x0001 +#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */ +#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */ +#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */ +#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005 +#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006 +#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007 +#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008 +#define SNMP_MIB_OID_11D_ENABLE 0x0009 +#define SNMP_MIB_OID_11H_ENABLE 0x000A + /* Define action or option for CMD_BT_ACCESS */ enum cmd_bt_access_opts { /* The bt commands start at 5 instead of 1 because the old dft commands diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index 913b480211a..d9f9a12a739 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -151,10 +151,6 @@ struct cmd_ds_get_hw_spec { __le32 fwcapinfo; } __attribute__ ((packed)); -struct cmd_ds_802_11_reset { - __le16 action; -}; - struct cmd_ds_802_11_subscribe_event { struct cmd_header hdr; @@ -232,7 +228,9 @@ struct cmd_ds_802_11_authenticate { }; struct cmd_ds_802_11_deauthenticate { - u8 macaddr[6]; + struct cmd_header hdr; + + u8 macaddr[ETH_ALEN]; __le16 reasoncode; }; @@ -251,20 +249,10 @@ struct cmd_ds_802_11_associate { #endif } __attribute__ ((packed)); -struct cmd_ds_802_11_disassociate { - u8 destmacaddr[6]; - __le16 reasoncode; -}; - struct cmd_ds_802_11_associate_rsp { struct ieeetypes_assocrsp assocRsp; }; -struct cmd_ds_802_11_ad_hoc_result { - u8 pad[3]; - u8 bssid[ETH_ALEN]; -}; - struct cmd_ds_802_11_set_wep { struct cmd_header hdr; @@ -309,7 +297,9 @@ struct cmd_ds_802_11_get_stat { }; struct cmd_ds_802_11_snmp_mib { - __le16 querytype; + struct cmd_header hdr; + + __le16 action; __le16 oid; __le16 bufsize; u8 value[128]; @@ -435,8 +425,12 @@ struct cmd_ds_802_11_mac_address { }; struct cmd_ds_802_11_rf_tx_power { + struct cmd_header hdr; + __le16 action; - __le16 currentlevel; + __le16 curlevel; + s8 maxlevel; + s8 minlevel; }; struct cmd_ds_802_11_rf_antenna { @@ -507,10 +501,12 @@ struct cmd_ds_802_11_rate_adapt_rateset { }; struct cmd_ds_802_11_ad_hoc_start { + struct cmd_header hdr; + u8 ssid[IW_ESSID_MAX_SIZE]; u8 bsstype; __le16 beaconperiod; - u8 dtimperiod; + u8 dtimperiod; /* Reserved on v9 and later */ union IEEEtypes_ssparamset ssparamset; union ieeetypes_phyparamset phyparamset; __le16 probedelay; @@ -519,9 +515,16 @@ struct cmd_ds_802_11_ad_hoc_start { u8 tlv_memory_size_pad[100]; } __attribute__ ((packed)); +struct cmd_ds_802_11_ad_hoc_result { + struct cmd_header hdr; + + u8 pad[3]; + u8 bssid[ETH_ALEN]; +}; + struct adhoc_bssdesc { - u8 bssid[6]; - u8 ssid[32]; + u8 bssid[ETH_ALEN]; + u8 ssid[IW_ESSID_MAX_SIZE]; u8 type; __le16 beaconperiod; u8 dtimperiod; @@ -539,10 +542,15 @@ struct adhoc_bssdesc { } __attribute__ ((packed)); struct cmd_ds_802_11_ad_hoc_join { + struct cmd_header hdr; + struct adhoc_bssdesc bss; - __le16 failtimeout; - __le16 probedelay; + __le16 failtimeout; /* Reserved on v9 and later */ + __le16 probedelay; /* Reserved on v9 and later */ +} __attribute__ ((packed)); +struct cmd_ds_802_11_ad_hoc_stop { + struct cmd_header hdr; } __attribute__ ((packed)); struct cmd_ds_802_11_enable_rsn { @@ -597,14 +605,28 @@ struct cmd_ds_802_11_eeprom_access { } __attribute__ ((packed)); struct cmd_ds_802_11_tpc_cfg { + struct cmd_header hdr; + __le16 action; - u8 enable; - s8 P0; - s8 P1; - s8 P2; - u8 usesnr; + uint8_t enable; + int8_t P0; + int8_t P1; + int8_t P2; + uint8_t usesnr; } __attribute__ ((packed)); + +struct cmd_ds_802_11_pa_cfg { + struct cmd_header hdr; + + __le16 action; + uint8_t enable; + int8_t P0; + int8_t P1; + int8_t P2; +} __attribute__ ((packed)); + + struct cmd_ds_802_11_led_ctrl { __le16 action; __le16 numled; @@ -693,21 +715,13 @@ struct cmd_ds_command { union { struct cmd_ds_802_11_ps_mode psmode; struct cmd_ds_802_11_associate associate; - struct cmd_ds_802_11_deauthenticate deauth; - struct cmd_ds_802_11_ad_hoc_start ads; - struct cmd_ds_802_11_reset reset; - struct cmd_ds_802_11_ad_hoc_result result; struct cmd_ds_802_11_authenticate auth; struct cmd_ds_802_11_get_stat gstat; struct cmd_ds_802_3_get_stat gstat_8023; - struct cmd_ds_802_11_snmp_mib smib; - struct cmd_ds_802_11_rf_tx_power txp; struct cmd_ds_802_11_rf_antenna rant; struct cmd_ds_802_11_monitor_mode monitor; - struct cmd_ds_802_11_ad_hoc_join adj; struct cmd_ds_802_11_rssi rssi; struct cmd_ds_802_11_rssi_rsp rssirsp; - struct cmd_ds_802_11_disassociate dassociate; struct cmd_ds_mac_reg_access macreg; struct cmd_ds_bbp_reg_access bbpreg; struct cmd_ds_rf_reg_access rfreg; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 8941919001b..e3505c110af 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -713,7 +713,7 @@ static int if_cs_host_to_card(struct lbs_private *priv, ret = if_cs_send_cmd(priv, buf, nb); break; default: - lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type); + lbs_pr_err("%s: unsupported type %d\n", __func__, type); } lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 632c291404a..cafbccb7414 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -39,7 +39,10 @@ MODULE_DEVICE_TABLE(usb, if_usb_table); static void if_usb_receive(struct urb *urb); static void if_usb_receive_fwload(struct urb *urb); -static int if_usb_prog_firmware(struct if_usb_card *cardp); +static int __if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd); +static int if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd); static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type, uint8_t *payload, uint16_t nb); static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, @@ -48,6 +51,62 @@ static void if_usb_free(struct if_usb_card *cardp); static int if_usb_submit_rx_urb(struct if_usb_card *cardp); static int if_usb_reset_device(struct if_usb_card *cardp); +/* sysfs hooks */ + +/** + * Set function to write firmware to device's persistent memory + */ +static ssize_t if_usb_firmware_set(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct lbs_private *priv = to_net_dev(dev)->priv; + struct if_usb_card *cardp = priv->card; + char fwname[FIRMWARE_NAME_MAX]; + int ret; + + sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */ + ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_FW); + if (ret == 0) + return count; + + return ret; +} + +/** + * lbs_flash_fw attribute to be exported per ethX interface through sysfs + * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to + * the device's persistent memory: + * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw + */ +static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set); + +/** + * Set function to write firmware to device's persistent memory + */ +static ssize_t if_usb_boot2_set(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct lbs_private *priv = to_net_dev(dev)->priv; + struct if_usb_card *cardp = priv->card; + char fwname[FIRMWARE_NAME_MAX]; + int ret; + + sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */ + ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_BOOT2); + if (ret == 0) + return count; + + return ret; +} + +/** + * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs + * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware + * to the device's persistent memory: + * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2 + */ +static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set); + /** * @brief call back function to handle the status of the URB * @param urb pointer to urb structure @@ -66,10 +125,10 @@ static void if_usb_write_bulk_callback(struct urb *urb) lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n", urb->actual_length); - /* Used for both firmware TX and regular TX. priv isn't - * valid at firmware load time. + /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not + * passed up to the lbs level. */ - if (priv) + if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT) lbs_host_to_card_done(priv); } else { /* print the failure status number for debug */ @@ -231,7 +290,7 @@ static int if_usb_probe(struct usb_interface *intf, } /* Upload firmware */ - if (if_usb_prog_firmware(cardp)) { + if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) { lbs_deb_usbd(&udev->dev, "FW upload failed\n"); goto err_prog_firmware; } @@ -260,6 +319,12 @@ static int if_usb_probe(struct usb_interface *intf, usb_get_dev(udev); usb_set_intfdata(intf, cardp); + if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw)) + lbs_pr_err("cannot register lbs_flash_fw attribute\n"); + + if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2)) + lbs_pr_err("cannot register lbs_flash_boot2 attribute\n"); + return 0; err_start_card: @@ -285,6 +350,9 @@ static void if_usb_disconnect(struct usb_interface *intf) lbs_deb_enter(LBS_DEB_MAIN); + device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2); + device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw); + cardp->surprise_removed = 1; if (priv) { @@ -371,11 +439,10 @@ static int if_usb_reset_device(struct if_usb_card *cardp) *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); cmd->command = cpu_to_le16(CMD_802_11_RESET); - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset) + S_DS_GEN); + cmd->size = cpu_to_le16(sizeof(struct cmd_header)); cmd->result = cpu_to_le16(0); cmd->seqnum = cpu_to_le16(0x5a5a); - cmd->params.reset.action = cpu_to_le16(CMD_ACT_HALT); - usb_tx_block(cardp, cardp->ep_out_buf, 4 + S_DS_GEN + sizeof(struct cmd_ds_802_11_reset)); + usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header)); msleep(100); ret = usb_reset_device(cardp->udev); @@ -510,7 +577,7 @@ static void if_usb_receive_fwload(struct urb *urb) if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) { kfree_skb(skb); if_usb_submit_rx_urb_fwload(cardp); - cardp->bootcmdresp = 1; + cardp->bootcmdresp = BOOT_CMD_RESP_OK; lbs_deb_usbd(&cardp->udev->dev, "Received valid boot command response\n"); return; @@ -526,7 +593,9 @@ static void if_usb_receive_fwload(struct urb *urb) lbs_pr_info("boot cmd response wrong magic number (0x%x)\n", le32_to_cpu(bootcmdresp.magic)); } - } else if (bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) { + } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) && + (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) && + (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) { lbs_pr_info("boot cmd response cmd_tag error (%d)\n", bootcmdresp.cmd); } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) { @@ -564,8 +633,8 @@ static void if_usb_receive_fwload(struct urb *urb) kfree_skb(skb); - /* reschedule timer for 200ms hence */ - mod_timer(&cardp->fw_timeout, jiffies + (HZ/5)); + /* Give device 5s to either write firmware to its RAM or eeprom */ + mod_timer(&cardp->fw_timeout, jiffies + (HZ*5)); if (cardp->fwfinalblk) { cardp->fwdnldover = 1; @@ -809,7 +878,54 @@ static int check_fwfile_format(const uint8_t *data, uint32_t totlen) } -static int if_usb_prog_firmware(struct if_usb_card *cardp) +/** +* @brief This function programs the firmware subject to cmd +* +* @param cardp the if_usb_card descriptor +* fwname firmware or boot2 image file name +* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW, +* or BOOT_CMD_UPDATE_BOOT2. +* @return 0 or error code +*/ +static int if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd) +{ + struct lbs_private *priv = cardp->priv; + unsigned long flags, caps; + int ret; + + caps = priv->fwcapinfo; + if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) || + ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE))) + return -EOPNOTSUPP; + + /* Ensure main thread is idle. */ + spin_lock_irqsave(&priv->driver_lock, flags); + while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + if (wait_event_interruptible(priv->waitq, + (priv->cur_cmd == NULL && + priv->dnld_sent == DNLD_RES_RECEIVED))) { + return -ERESTARTSYS; + } + spin_lock_irqsave(&priv->driver_lock, flags); + } + priv->dnld_sent = DNLD_BOOTCMD_SENT; + spin_unlock_irqrestore(&priv->driver_lock, flags); + + ret = __if_usb_prog_firmware(cardp, fwname, cmd); + + spin_lock_irqsave(&priv->driver_lock, flags); + priv->dnld_sent = DNLD_RES_RECEIVED; + spin_unlock_irqrestore(&priv->driver_lock, flags); + + wake_up_interruptible(&priv->waitq); + + return ret; +} + +static int __if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd) { int i = 0; static int reset_count = 10; @@ -817,20 +933,32 @@ static int if_usb_prog_firmware(struct if_usb_card *cardp) lbs_deb_enter(LBS_DEB_USB); - if ((ret = request_firmware(&cardp->fw, lbs_fw_name, - &cardp->udev->dev)) < 0) { + ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev); + if (ret < 0) { lbs_pr_err("request_firmware() failed with %#x\n", ret); - lbs_pr_err("firmware %s not found\n", lbs_fw_name); + lbs_pr_err("firmware %s not found\n", fwname); goto done; } - if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) + if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) { + ret = -EINVAL; goto release_fw; + } + + /* Cancel any pending usb business */ + usb_kill_urb(cardp->rx_urb); + usb_kill_urb(cardp->tx_urb); + + cardp->fwlastblksent = 0; + cardp->fwdnldover = 0; + cardp->totalbytes = 0; + cardp->fwfinalblk = 0; + cardp->bootcmdresp = 0; restart: if (if_usb_submit_rx_urb_fwload(cardp) < 0) { lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n"); - ret = -1; + ret = -EIO; goto release_fw; } @@ -838,8 +966,7 @@ restart: do { int j = 0; i++; - /* Issue Boot command = 1, Boot from Download-FW */ - if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB); + if_usb_issue_boot_command(cardp, cmd); /* wait for command response */ do { j++; @@ -847,12 +974,21 @@ restart: } while (cardp->bootcmdresp == 0 && j < 10); } while (cardp->bootcmdresp == 0 && i < 5); - if (cardp->bootcmdresp <= 0) { + if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) { + /* Return to normal operation */ + ret = -EOPNOTSUPP; + usb_kill_urb(cardp->rx_urb); + usb_kill_urb(cardp->tx_urb); + if (if_usb_submit_rx_urb(cardp) < 0) + ret = -EIO; + goto release_fw; + } else if (cardp->bootcmdresp <= 0) { if (--reset_count >= 0) { if_usb_reset_device(cardp); goto restart; } - return -1; + ret = -EIO; + goto release_fw; } i = 0; @@ -882,7 +1018,7 @@ restart: } lbs_pr_info("FW download failure, time = %d ms\n", i * 100); - ret = -1; + ret = -EIO; goto release_fw; } diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h index 5771a83a43f..5ba0aee0eb2 100644 --- a/drivers/net/wireless/libertas/if_usb.h +++ b/drivers/net/wireless/libertas/if_usb.h @@ -30,6 +30,7 @@ struct bootcmd #define BOOT_CMD_RESP_OK 0x0001 #define BOOT_CMD_RESP_FAIL 0x0000 +#define BOOT_CMD_RESP_NOT_SUPPORTED 0x0002 struct bootcmdresp { @@ -50,6 +51,10 @@ struct if_usb_card { uint8_t ep_in; uint8_t ep_out; + /* bootcmdresp == 0 means command is pending + * bootcmdresp < 0 means error + * bootcmdresp > 0 is a BOOT_CMD_RESP_* from firmware + */ int8_t bootcmdresp; int ep_in_size; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index bd32ac0b4e0..73dc8c72402 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -291,9 +291,11 @@ static ssize_t lbs_rtap_set(struct device *dev, if (priv->infra_open || priv->mesh_open) return -EBUSY; if (priv->mode == IW_MODE_INFRA) - lbs_send_deauthentication(priv); + lbs_cmd_80211_deauthenticate(priv, + priv->curbssparams.bssid, + WLAN_REASON_DEAUTH_LEAVING); else if (priv->mode == IW_MODE_ADHOC) - lbs_stop_adhoc_network(priv); + lbs_adhoc_stop(priv); lbs_add_rtap(priv); } priv->monitormode = monitor_mode; @@ -956,17 +958,24 @@ EXPORT_SYMBOL_GPL(lbs_resume); static int lbs_setup_firmware(struct lbs_private *priv) { int ret = -1; + s16 curlevel = 0, minlevel = 0, maxlevel = 0; lbs_deb_enter(LBS_DEB_FW); - /* - * Read MAC address from HW - */ + /* Read MAC address from firmware */ memset(priv->current_addr, 0xff, ETH_ALEN); ret = lbs_update_hw_spec(priv); if (ret) goto done; + /* Read power levels if available */ + ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel); + if (ret == 0) { + priv->txpower_cur = curlevel; + priv->txpower_min = minlevel; + priv->txpower_max = maxlevel; + } + lbs_set_mac_control(priv); done: lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); @@ -1042,7 +1051,7 @@ static int lbs_init_adapter(struct lbs_private *priv) priv->mode = IW_MODE_INFRA; priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL; priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; - priv->radioon = RADIO_ON; + priv->radio_on = 1; priv->enablehwauto = 1; priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; priv->psmode = LBS802_11POWERMODECAM; @@ -1196,7 +1205,13 @@ void lbs_remove_card(struct lbs_private *priv) cancel_delayed_work_sync(&priv->scan_work); cancel_delayed_work_sync(&priv->assoc_work); cancel_work_sync(&priv->mcast_work); + + /* worker thread destruction blocks on the in-flight command which + * should have been cleared already in lbs_stop_card(). + */ + lbs_deb_main("destroying worker thread\n"); destroy_workqueue(priv->work_thread); + lbs_deb_main("done destroying worker thread\n"); if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { priv->psmode = LBS802_11POWERMODECAM; @@ -1314,14 +1329,26 @@ void lbs_stop_card(struct lbs_private *priv) device_remove_file(&dev->dev, &dev_attr_lbs_rtap); } - /* Flush pending command nodes */ + /* Delete the timeout of the currently processing command */ del_timer_sync(&priv->command_timer); + + /* Flush pending command nodes */ spin_lock_irqsave(&priv->driver_lock, flags); + lbs_deb_main("clearing pending commands\n"); list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { cmdnode->result = -ENOENT; cmdnode->cmdwaitqwoken = 1; wake_up_interruptible(&cmdnode->cmdwait_q); } + + /* Flush the command the card is currently processing */ + if (priv->cur_cmd) { + lbs_deb_main("clearing current command\n"); + priv->cur_cmd->result = -ENOENT; + priv->cur_cmd->cmdwaitqwoken = 1; + wake_up_interruptible(&priv->cur_cmd->cmdwait_q); + } + lbs_deb_main("done clearing commands\n"); spin_unlock_irqrestore(&priv->driver_lock, flags); unregister_netdev(dev); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 4b274562f96..8f66903641b 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -944,6 +944,11 @@ int lbs_set_scan(struct net_device *dev, struct iw_request_info *info, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) { + ret = -EINVAL; + goto out; + } + if (!netif_running(dev)) { ret = -ENETDOWN; goto out; diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c index 8b3ed77860b..82c3e5a50ea 100644 --- a/drivers/net/wireless/libertas/wext.c +++ b/drivers/net/wireless/libertas/wext.c @@ -30,6 +30,14 @@ static inline void lbs_postpone_association_work(struct lbs_private *priv) queue_delayed_work(priv->work_thread, &priv->assoc_work, HZ / 2); } +static inline void lbs_do_association_work(struct lbs_private *priv) +{ + if (priv->surpriseremoved) + return; + cancel_delayed_work(&priv->assoc_work); + queue_delayed_work(priv->work_thread, &priv->assoc_work, 0); +} + static inline void lbs_cancel_association_work(struct lbs_private *priv) { cancel_delayed_work(&priv->assoc_work); @@ -120,34 +128,6 @@ static struct chan_freq_power *find_cfp_by_band_and_freq( return cfp; } - -/** - * @brief Set Radio On/OFF - * - * @param priv A pointer to struct lbs_private structure - * @option Radio Option - * @return 0 --success, otherwise fail - */ -static int lbs_radio_ioctl(struct lbs_private *priv, u8 option) -{ - int ret = 0; - - lbs_deb_enter(LBS_DEB_WEXT); - - if (priv->radioon != option) { - lbs_deb_wext("switching radio %s\n", option ? "on" : "off"); - priv->radioon = option; - - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_RADIO_CONTROL, - CMD_ACT_SET, - CMD_OPTION_WAITFORRSP, 0, NULL); - } - - lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); - return ret; -} - /** * @brief Copy active data rates based on adapter mode and status * @@ -294,21 +274,17 @@ static int lbs_set_rts(struct net_device *dev, struct iw_request_info *info, { int ret = 0; struct lbs_private *priv = dev->priv; - u32 rthr = vwrq->value; + u32 val = vwrq->value; lbs_deb_enter(LBS_DEB_WEXT); - if (vwrq->disabled) { - priv->rtsthsd = rthr = MRVDRV_RTS_MAX_VALUE; - } else { - if (rthr < MRVDRV_RTS_MIN_VALUE || rthr > MRVDRV_RTS_MAX_VALUE) - return -EINVAL; - priv->rtsthsd = rthr; - } + if (vwrq->disabled) + val = MRVDRV_RTS_MAX_VALUE; + + if (val > MRVDRV_RTS_MAX_VALUE) /* min rts value is 0 */ + return -EINVAL; - ret = lbs_prepare_and_send_command(priv, CMD_802_11_SNMP_MIB, - CMD_ACT_SET, CMD_OPTION_WAITFORRSP, - OID_802_11_RTS_THRESHOLD, &rthr); + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_RTS_THRESHOLD, (u16) val); lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); return ret; @@ -317,21 +293,18 @@ static int lbs_set_rts(struct net_device *dev, struct iw_request_info *info, static int lbs_get_rts(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { - int ret = 0; struct lbs_private *priv = dev->priv; + int ret = 0; + u16 val = 0; lbs_deb_enter(LBS_DEB_WEXT); - priv->rtsthsd = 0; - ret = lbs_prepare_and_send_command(priv, CMD_802_11_SNMP_MIB, - CMD_ACT_GET, CMD_OPTION_WAITFORRSP, - OID_802_11_RTS_THRESHOLD, NULL); + ret = lbs_get_snmp_mib(priv, SNMP_MIB_OID_RTS_THRESHOLD, &val); if (ret) goto out; - vwrq->value = priv->rtsthsd; - vwrq->disabled = ((vwrq->value < MRVDRV_RTS_MIN_VALUE) - || (vwrq->value > MRVDRV_RTS_MAX_VALUE)); + vwrq->value = val; + vwrq->disabled = val > MRVDRV_RTS_MAX_VALUE; /* min rts value is 0 */ vwrq->fixed = 1; out: @@ -342,24 +315,19 @@ out: static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { - int ret = 0; - u32 fthr = vwrq->value; struct lbs_private *priv = dev->priv; + int ret = 0; + u32 val = vwrq->value; lbs_deb_enter(LBS_DEB_WEXT); - if (vwrq->disabled) { - priv->fragthsd = fthr = MRVDRV_FRAG_MAX_VALUE; - } else { - if (fthr < MRVDRV_FRAG_MIN_VALUE - || fthr > MRVDRV_FRAG_MAX_VALUE) - return -EINVAL; - priv->fragthsd = fthr; - } + if (vwrq->disabled) + val = MRVDRV_FRAG_MAX_VALUE; + + if (val < MRVDRV_FRAG_MIN_VALUE || val > MRVDRV_FRAG_MAX_VALUE) + return -EINVAL; - ret = lbs_prepare_and_send_command(priv, CMD_802_11_SNMP_MIB, - CMD_ACT_SET, CMD_OPTION_WAITFORRSP, - OID_802_11_FRAGMENTATION_THRESHOLD, &fthr); + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_FRAG_THRESHOLD, (u16) val); lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); return ret; @@ -368,22 +336,19 @@ static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info, static int lbs_get_frag(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { - int ret = 0; struct lbs_private *priv = dev->priv; + int ret = 0; + u16 val = 0; lbs_deb_enter(LBS_DEB_WEXT); - priv->fragthsd = 0; - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_SNMP_MIB, - CMD_ACT_GET, CMD_OPTION_WAITFORRSP, - OID_802_11_FRAGMENTATION_THRESHOLD, NULL); + ret = lbs_get_snmp_mib(priv, SNMP_MIB_OID_FRAG_THRESHOLD, &val); if (ret) goto out; - vwrq->value = priv->fragthsd; - vwrq->disabled = ((vwrq->value < MRVDRV_FRAG_MIN_VALUE) - || (vwrq->value > MRVDRV_FRAG_MAX_VALUE)); + vwrq->value = val; + vwrq->disabled = ((val < MRVDRV_FRAG_MIN_VALUE) + || (val > MRVDRV_FRAG_MAX_VALUE)); vwrq->fixed = 1; out: @@ -410,7 +375,7 @@ static int mesh_wlan_get_mode(struct net_device *dev, { lbs_deb_enter(LBS_DEB_WEXT); - *uwrq = IW_MODE_REPEAT ; + *uwrq = IW_MODE_REPEAT; lbs_deb_leave(LBS_DEB_WEXT); return 0; @@ -420,28 +385,30 @@ static int lbs_get_txpow(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { - int ret = 0; struct lbs_private *priv = dev->priv; + s16 curlevel = 0; + int ret = 0; lbs_deb_enter(LBS_DEB_WEXT); - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_RF_TX_POWER, - CMD_ACT_TX_POWER_OPT_GET, - CMD_OPTION_WAITFORRSP, 0, NULL); + if (!priv->radio_on) { + lbs_deb_wext("tx power off\n"); + vwrq->value = 0; + vwrq->disabled = 1; + goto out; + } + ret = lbs_get_tx_power(priv, &curlevel, NULL, NULL); if (ret) goto out; - lbs_deb_wext("tx power level %d dbm\n", priv->txpowerlevel); - vwrq->value = priv->txpowerlevel; + lbs_deb_wext("tx power level %d dbm\n", curlevel); + priv->txpower_cur = curlevel; + + vwrq->value = curlevel; vwrq->fixed = 1; - if (priv->radioon) { - vwrq->disabled = 0; - vwrq->flags = IW_TXPOW_DBM; - } else { - vwrq->disabled = 1; - } + vwrq->disabled = 0; + vwrq->flags = IW_TXPOW_DBM; out: lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); @@ -451,31 +418,44 @@ out: static int lbs_set_retry(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { - int ret = 0; struct lbs_private *priv = dev->priv; + int ret = 0; + u16 slimit = 0, llimit = 0; lbs_deb_enter(LBS_DEB_WEXT); - if (vwrq->flags == IW_RETRY_LIMIT) { - /* The MAC has a 4-bit Total_Tx_Count register - Total_Tx_Count = 1 + Tx_Retry_Count */ + if ((vwrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) + return -EOPNOTSUPP; + + /* The MAC has a 4-bit Total_Tx_Count register + Total_Tx_Count = 1 + Tx_Retry_Count */ #define TX_RETRY_MIN 0 #define TX_RETRY_MAX 14 - if (vwrq->value < TX_RETRY_MIN || vwrq->value > TX_RETRY_MAX) - return -EINVAL; + if (vwrq->value < TX_RETRY_MIN || vwrq->value > TX_RETRY_MAX) + return -EINVAL; - /* Adding 1 to convert retry count to try count */ - priv->txretrycount = vwrq->value + 1; + /* Add 1 to convert retry count to try count */ + if (vwrq->flags & IW_RETRY_SHORT) + slimit = (u16) (vwrq->value + 1); + else if (vwrq->flags & IW_RETRY_LONG) + llimit = (u16) (vwrq->value + 1); + else + slimit = llimit = (u16) (vwrq->value + 1); /* set both */ - ret = lbs_prepare_and_send_command(priv, CMD_802_11_SNMP_MIB, - CMD_ACT_SET, - CMD_OPTION_WAITFORRSP, - OID_802_11_TX_RETRYCOUNT, NULL); + if (llimit) { + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_LONG_RETRY_LIMIT, + llimit); + if (ret) + goto out; + } + if (slimit) { + /* txretrycount follows the short retry limit */ + priv->txretrycount = slimit; + ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_SHORT_RETRY_LIMIT, + slimit); if (ret) goto out; - } else { - return -EOPNOTSUPP; } out: @@ -488,22 +468,30 @@ static int lbs_get_retry(struct net_device *dev, struct iw_request_info *info, { struct lbs_private *priv = dev->priv; int ret = 0; + u16 val = 0; lbs_deb_enter(LBS_DEB_WEXT); - priv->txretrycount = 0; - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_SNMP_MIB, - CMD_ACT_GET, CMD_OPTION_WAITFORRSP, - OID_802_11_TX_RETRYCOUNT, NULL); - if (ret) - goto out; - vwrq->disabled = 0; - if (!vwrq->flags) { - vwrq->flags = IW_RETRY_LIMIT; + + if (vwrq->flags & IW_RETRY_LONG) { + ret = lbs_get_snmp_mib(priv, SNMP_MIB_OID_LONG_RETRY_LIMIT, &val); + if (ret) + goto out; + + /* Subtract 1 to convert try count to retry count */ + vwrq->value = val - 1; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; + } else { + ret = lbs_get_snmp_mib(priv, SNMP_MIB_OID_SHORT_RETRY_LIMIT, &val); + if (ret) + goto out; + + /* txretry count follows the short retry limit */ + priv->txretrycount = val; /* Subtract 1 to convert try count to retry count */ - vwrq->value = priv->txretrycount - 1; + vwrq->value = val - 1; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_SHORT; } out: @@ -693,22 +681,12 @@ static int lbs_get_range(struct net_device *dev, struct iw_request_info *info, range->sensitivity = 0; - /* - * Setup the supported power level ranges - */ + /* Setup the supported power level ranges */ memset(range->txpower, 0, sizeof(range->txpower)); - range->txpower[0] = 5; - range->txpower[1] = 7; - range->txpower[2] = 9; - range->txpower[3] = 11; - range->txpower[4] = 13; - range->txpower[5] = 15; - range->txpower[6] = 17; - range->txpower[7] = 19; - - range->num_txpower = 8; - range->txpower_capa = IW_TXPOW_DBM; - range->txpower_capa |= IW_TXPOW_RANGE; + range->txpower_capa = IW_TXPOW_DBM | IW_TXPOW_RANGE; + range->txpower[0] = priv->txpower_min; + range->txpower[1] = priv->txpower_max; + range->num_txpower = 2; range->event_capa[0] = (IW_EVENT_CAPA_K_0 | IW_EVENT_CAPA_MASK(SIOCGIWAP) | @@ -998,9 +976,11 @@ static int lbs_mesh_set_freq(struct net_device *dev, if (fwrq->m != priv->curbssparams.channel) { lbs_deb_wext("mesh channel change forces eth disconnect\n"); if (priv->mode == IW_MODE_INFRA) - lbs_send_deauthentication(priv); + lbs_cmd_80211_deauthenticate(priv, + priv->curbssparams.bssid, + WLAN_REASON_DEAUTH_LEAVING); else if (priv->mode == IW_MODE_ADHOC) - lbs_stop_adhoc_network(priv); + lbs_adhoc_stop(priv); } lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, fwrq->m); lbs_update_channel(priv); @@ -1045,6 +1025,18 @@ static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info, new_rate); goto out; } + if (priv->fwrelease < 0x09000000) { + ret = lbs_set_power_adapt_cfg(priv, 0, + POW_ADAPT_DEFAULT_P0, + POW_ADAPT_DEFAULT_P1, + POW_ADAPT_DEFAULT_P2); + if (ret) + goto out; + } + ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1, + TPC_DEFAULT_P2, 1); + if (ret) + goto out; } /* Try the newer command first (Firmware Spec 5.1 and above) */ @@ -1612,12 +1604,26 @@ static int lbs_set_encodeext(struct net_device *dev, set_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags); } - disable_wep (assoc_req); + /* Only disable wep if necessary: can't waste time here. */ + if (priv->mac_control & CMD_ACT_MAC_WEP_ENABLE) + disable_wep(assoc_req); } out: if (ret == 0) { - lbs_postpone_association_work(priv); + /* 802.1x and WPA rekeying must happen as quickly as possible, + * especially during the 4-way handshake; thus if in + * infrastructure mode, and either (a) 802.1x is enabled or + * (b) WPA is being used, set the key right away. + */ + if (assoc_req->mode == IW_MODE_INFRA && + ((assoc_req->secinfo.key_mgmt & IW_AUTH_KEY_MGMT_802_1X) || + (assoc_req->secinfo.key_mgmt & IW_AUTH_KEY_MGMT_PSK) || + assoc_req->secinfo.WPAenabled || + assoc_req->secinfo.WPA2enabled)) { + lbs_do_association_work(priv); + } else + lbs_postpone_association_work(priv); } else { lbs_cancel_association_work(priv); } @@ -1725,13 +1731,17 @@ static int lbs_set_auth(struct net_device *dev, case IW_AUTH_TKIP_COUNTERMEASURES: case IW_AUTH_CIPHER_PAIRWISE: case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_KEY_MGMT: case IW_AUTH_DROP_UNENCRYPTED: /* * libertas does not use these parameters */ break; + case IW_AUTH_KEY_MGMT: + assoc_req->secinfo.key_mgmt = dwrq->value; + updated = 1; + break; + case IW_AUTH_WPA_VERSION: if (dwrq->value & IW_AUTH_WPA_VERSION_DISABLED) { assoc_req->secinfo.WPAenabled = 0; @@ -1811,6 +1821,10 @@ static int lbs_get_auth(struct net_device *dev, lbs_deb_enter(LBS_DEB_WEXT); switch (dwrq->flags & IW_AUTH_INDEX) { + case IW_AUTH_KEY_MGMT: + dwrq->value = priv->secinfo.key_mgmt; + break; + case IW_AUTH_WPA_VERSION: dwrq->value = 0; if (priv->secinfo.WPAenabled) @@ -1844,39 +1858,77 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info, { int ret = 0; struct lbs_private *priv = dev->priv; - - u16 dbm; + s16 dbm = (s16) vwrq->value; lbs_deb_enter(LBS_DEB_WEXT); if (vwrq->disabled) { - lbs_radio_ioctl(priv, RADIO_OFF); - return 0; + lbs_set_radio(priv, RADIO_PREAMBLE_AUTO, 0); + goto out; } - priv->preamble = CMD_TYPE_AUTO_PREAMBLE; - - lbs_radio_ioctl(priv, RADIO_ON); + if (vwrq->fixed == 0) { + /* User requests automatic tx power control, however there are + * many auto tx settings. For now use firmware defaults until + * we come up with a good way to expose these to the user. */ + if (priv->fwrelease < 0x09000000) { + ret = lbs_set_power_adapt_cfg(priv, 1, + POW_ADAPT_DEFAULT_P0, + POW_ADAPT_DEFAULT_P1, + POW_ADAPT_DEFAULT_P2); + if (ret) + goto out; + } + ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1, + TPC_DEFAULT_P2, 1); + if (ret) + goto out; + dbm = priv->txpower_max; + } else { + /* Userspace check in iwrange if it should use dBm or mW, + * therefore this should never happen... Jean II */ + if ((vwrq->flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) { + ret = -EOPNOTSUPP; + goto out; + } - /* Userspace check in iwrange if it should use dBm or mW, - * therefore this should never happen... Jean II */ - if ((vwrq->flags & IW_TXPOW_TYPE) == IW_TXPOW_MWATT) { - return -EOPNOTSUPP; - } else - dbm = (u16) vwrq->value; + /* Validate requested power level against firmware allowed + * levels */ + if (priv->txpower_min && (dbm < priv->txpower_min)) { + ret = -EINVAL; + goto out; + } - /* auto tx power control */ + if (priv->txpower_max && (dbm > priv->txpower_max)) { + ret = -EINVAL; + goto out; + } + if (priv->fwrelease < 0x09000000) { + ret = lbs_set_power_adapt_cfg(priv, 0, + POW_ADAPT_DEFAULT_P0, + POW_ADAPT_DEFAULT_P1, + POW_ADAPT_DEFAULT_P2); + if (ret) + goto out; + } + ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1, + TPC_DEFAULT_P2, 1); + if (ret) + goto out; + } - if (vwrq->fixed == 0) - dbm = 0xffff; + /* If the radio was off, turn it on */ + if (!priv->radio_on) { + ret = lbs_set_radio(priv, RADIO_PREAMBLE_AUTO, 1); + if (ret) + goto out; + } - lbs_deb_wext("txpower set %d dbm\n", dbm); + lbs_deb_wext("txpower set %d dBm\n", dbm); - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_RF_TX_POWER, - CMD_ACT_TX_POWER_OPT_SET_LOW, - CMD_OPTION_WAITFORRSP, 0, (void *)&dbm); + ret = lbs_set_tx_power(priv, dbm); +out: lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); return ret; } @@ -1928,6 +1980,11 @@ static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) { + ret = -EINVAL; + goto out; + } + /* Check the size of the string */ if (in_ssid_len > IW_ESSID_MAX_SIZE) { ret = -E2BIG; @@ -2005,6 +2062,11 @@ static int lbs_mesh_set_essid(struct net_device *dev, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) { + ret = -EINVAL; + goto out; + } + /* Check the size of the string */ if (dwrq->length > IW_ESSID_MAX_SIZE) { ret = -E2BIG; @@ -2046,6 +2108,9 @@ static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) + return -EINVAL; + if (awrq->sa_family != ARPHRD_ETHER) return -EINVAL; diff --git a/drivers/net/wireless/libertas_tf/Makefile b/drivers/net/wireless/libertas_tf/Makefile new file mode 100644 index 00000000000..ff5544d6ac9 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/Makefile @@ -0,0 +1,6 @@ +libertas_tf-objs := main.o cmd.o + +libertas_tf_usb-objs += if_usb.o + +obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf.o +obj-$(CONFIG_LIBERTAS_THINFIRM_USB) += libertas_tf_usb.o diff --git a/drivers/net/wireless/libertas_tf/cmd.c b/drivers/net/wireless/libertas_tf/cmd.c new file mode 100644 index 00000000000..fdbcf8ba3e8 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/cmd.c @@ -0,0 +1,669 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include "libertas_tf.h" + +static const struct channel_range channel_ranges[] = { + { LBTF_REGDOMAIN_US, 1, 12 }, + { LBTF_REGDOMAIN_CA, 1, 12 }, + { LBTF_REGDOMAIN_EU, 1, 14 }, + { LBTF_REGDOMAIN_JP, 1, 14 }, + { LBTF_REGDOMAIN_SP, 1, 14 }, + { LBTF_REGDOMAIN_FR, 1, 14 }, +}; + +static u16 lbtf_region_code_to_index[MRVDRV_MAX_REGION_CODE] = +{ + LBTF_REGDOMAIN_US, LBTF_REGDOMAIN_CA, LBTF_REGDOMAIN_EU, + LBTF_REGDOMAIN_SP, LBTF_REGDOMAIN_FR, LBTF_REGDOMAIN_JP, +}; + +static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv); + + +/** + * lbtf_cmd_copyback - Simple callback that copies response back into command + * + * @priv A pointer to struct lbtf_private structure + * @extra A pointer to the original command structure for which + * 'resp' is a response + * @resp A pointer to the command response + * + * Returns: 0 on success, error on failure + */ +int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra, + struct cmd_header *resp) +{ + struct cmd_header *buf = (void *)extra; + uint16_t copy_len; + + copy_len = min(le16_to_cpu(buf->size), le16_to_cpu(resp->size)); + memcpy(buf, resp, copy_len); + return 0; +} +EXPORT_SYMBOL_GPL(lbtf_cmd_copyback); + +#define CHAN_TO_IDX(chan) ((chan) - 1) + +static void lbtf_geo_init(struct lbtf_private *priv) +{ + const struct channel_range *range = channel_ranges; + u8 ch; + int i; + + for (i = 0; i < ARRAY_SIZE(channel_ranges); i++) + if (channel_ranges[i].regdomain == priv->regioncode) { + range = &channel_ranges[i]; + break; + } + + for (ch = priv->range.start; ch < priv->range.end; ch++) + priv->channels[CHAN_TO_IDX(ch)].flags = 0; +} + +/** + * lbtf_update_hw_spec: Updates the hardware details. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success, error on failure + */ +int lbtf_update_hw_spec(struct lbtf_private *priv) +{ + struct cmd_ds_get_hw_spec cmd; + int ret = -1; + u32 i; + DECLARE_MAC_BUF(mac); + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN); + ret = lbtf_cmd_with_response(priv, CMD_GET_HW_SPEC, &cmd); + if (ret) + goto out; + + priv->fwcapinfo = le32_to_cpu(cmd.fwcapinfo); + + /* The firmware release is in an interesting format: the patch + * level is in the most significant nibble ... so fix that: */ + priv->fwrelease = le32_to_cpu(cmd.fwrelease); + priv->fwrelease = (priv->fwrelease << 8) | + (priv->fwrelease >> 24 & 0xff); + + printk(KERN_INFO "libertastf: %s, fw %u.%u.%up%u, cap 0x%08x\n", + print_mac(mac, cmd.permanentaddr), + priv->fwrelease >> 24 & 0xff, + priv->fwrelease >> 16 & 0xff, + priv->fwrelease >> 8 & 0xff, + priv->fwrelease & 0xff, + priv->fwcapinfo); + + /* Clamp region code to 8-bit since FW spec indicates that it should + * only ever be 8-bit, even though the field size is 16-bit. Some + * firmware returns non-zero high 8 bits here. + */ + priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF; + + for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { + /* use the region code to search for the index */ + if (priv->regioncode == lbtf_region_code_to_index[i]) + break; + } + + /* if it's unidentified region code, use the default (USA) */ + if (i >= MRVDRV_MAX_REGION_CODE) + priv->regioncode = 0x10; + + if (priv->current_addr[0] == 0xff) + memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN); + + SET_IEEE80211_PERM_ADDR(priv->hw, priv->current_addr); + + lbtf_geo_init(priv); +out: + return ret; +} + +/** + * lbtf_set_channel: Set the radio channel + * + * @priv A pointer to struct lbtf_private structure + * @channel The desired channel, or 0 to clear a locked channel + * + * Returns: 0 on success, error on failure + */ +int lbtf_set_channel(struct lbtf_private *priv, u8 channel) +{ + struct cmd_ds_802_11_rf_channel cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET); + cmd.channel = cpu_to_le16(channel); + + return lbtf_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); +} + +int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon) +{ + struct cmd_ds_802_11_beacon_set cmd; + int size; + + if (beacon->len > MRVL_MAX_BCN_SIZE) + return -1; + size = sizeof(cmd) - sizeof(cmd.beacon) + beacon->len; + cmd.hdr.size = cpu_to_le16(size); + cmd.len = cpu_to_le16(beacon->len); + memcpy(cmd.beacon, (u8 *) beacon->data, beacon->len); + + lbtf_cmd_async(priv, CMD_802_11_BEACON_SET, &cmd.hdr, size); + return 0; +} + +int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable, + int beacon_int) { + struct cmd_ds_802_11_beacon_control cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.beacon_enable = cpu_to_le16(beacon_enable); + cmd.beacon_period = cpu_to_le16(beacon_int); + + lbtf_cmd_async(priv, CMD_802_11_BEACON_CTRL, &cmd.hdr, sizeof(cmd)); + return 0; +} + +static void lbtf_queue_cmd(struct lbtf_private *priv, + struct cmd_ctrl_node *cmdnode) +{ + unsigned long flags; + + if (!cmdnode) + return; + + if (!cmdnode->cmdbuf->size) + return; + + cmdnode->result = 0; + spin_lock_irqsave(&priv->driver_lock, flags); + list_add_tail(&cmdnode->list, &priv->cmdpendingq); + spin_unlock_irqrestore(&priv->driver_lock, flags); +} + +static void lbtf_submit_command(struct lbtf_private *priv, + struct cmd_ctrl_node *cmdnode) +{ + unsigned long flags; + struct cmd_header *cmd; + uint16_t cmdsize; + uint16_t command; + int timeo = 5 * HZ; + int ret; + + cmd = cmdnode->cmdbuf; + + spin_lock_irqsave(&priv->driver_lock, flags); + priv->cur_cmd = cmdnode; + cmdsize = le16_to_cpu(cmd->size); + command = le16_to_cpu(cmd->command); + ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize); + spin_unlock_irqrestore(&priv->driver_lock, flags); + + if (ret) + /* Let the timer kick in and retry, and potentially reset + the whole thing if the condition persists */ + timeo = HZ; + + /* Setup the timer after transmit command */ + mod_timer(&priv->command_timer, jiffies + timeo); +} + +/** + * This function inserts command node to cmdfreeq + * after cleans it. Requires priv->driver_lock held. + */ +static void __lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, + struct cmd_ctrl_node *cmdnode) +{ + if (!cmdnode) + return; + + cmdnode->callback = NULL; + cmdnode->callback_arg = 0; + + memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE); + + list_add_tail(&cmdnode->list, &priv->cmdfreeq); +} + +static void lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, + struct cmd_ctrl_node *ptempcmd) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->driver_lock, flags); + __lbtf_cleanup_and_insert_cmd(priv, ptempcmd); + spin_unlock_irqrestore(&priv->driver_lock, flags); +} + +void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd, + int result) +{ + cmd->result = result; + cmd->cmdwaitqwoken = 1; + wake_up_interruptible(&cmd->cmdwait_q); + + if (!cmd->callback) + __lbtf_cleanup_and_insert_cmd(priv, cmd); + priv->cur_cmd = NULL; +} + +int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv) +{ + struct cmd_ds_mac_multicast_addr cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + + cmd.nr_of_adrs = cpu_to_le16((u16) priv->nr_of_multicastmacaddr); + memcpy(cmd.maclist, priv->multicastlist, + priv->nr_of_multicastmacaddr * ETH_ALEN); + + lbtf_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &cmd.hdr, sizeof(cmd)); + return 0; +} + +void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode) +{ + struct cmd_ds_set_mode cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.mode = cpu_to_le16(mode); + lbtf_cmd_async(priv, CMD_802_11_SET_MODE, &cmd.hdr, sizeof(cmd)); +} + +void lbtf_set_bssid(struct lbtf_private *priv, bool activate, u8 *bssid) +{ + struct cmd_ds_set_bssid cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.activate = activate ? 1 : 0; + if (activate) + memcpy(cmd.bssid, bssid, ETH_ALEN); + + lbtf_cmd_async(priv, CMD_802_11_SET_BSSID, &cmd.hdr, sizeof(cmd)); +} + +int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr) +{ + struct cmd_ds_802_11_mac_address cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + + memcpy(cmd.macadd, mac_addr, ETH_ALEN); + + lbtf_cmd_async(priv, CMD_802_11_MAC_ADDRESS, &cmd.hdr, sizeof(cmd)); + return 0; +} + +int lbtf_set_radio_control(struct lbtf_private *priv) +{ + int ret = 0; + struct cmd_ds_802_11_radio_control cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + + switch (priv->preamble) { + case CMD_TYPE_SHORT_PREAMBLE: + cmd.control = cpu_to_le16(SET_SHORT_PREAMBLE); + break; + + case CMD_TYPE_LONG_PREAMBLE: + cmd.control = cpu_to_le16(SET_LONG_PREAMBLE); + break; + + case CMD_TYPE_AUTO_PREAMBLE: + default: + cmd.control = cpu_to_le16(SET_AUTO_PREAMBLE); + break; + } + + if (priv->radioon) + cmd.control |= cpu_to_le16(TURN_ON_RF); + else + cmd.control &= cpu_to_le16(~TURN_ON_RF); + + ret = lbtf_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); + return ret; +} + +void lbtf_set_mac_control(struct lbtf_private *priv) +{ + struct cmd_ds_mac_control cmd; + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(priv->mac_control); + cmd.reserved = 0; + + lbtf_cmd_async(priv, CMD_MAC_CONTROL, + &cmd.hdr, sizeof(cmd)); +} + +/** + * lbtf_allocate_cmd_buffer - Allocates cmd buffer, links it to free cmd queue + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success. + */ +int lbtf_allocate_cmd_buffer(struct lbtf_private *priv) +{ + u32 bufsize; + u32 i; + struct cmd_ctrl_node *cmdarray; + + /* Allocate and initialize the command array */ + bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS; + cmdarray = kzalloc(bufsize, GFP_KERNEL); + if (!cmdarray) + return -1; + priv->cmd_array = cmdarray; + + /* Allocate and initialize each command buffer in the command array */ + for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { + cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL); + if (!cmdarray[i].cmdbuf) + return -1; + } + + for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { + init_waitqueue_head(&cmdarray[i].cmdwait_q); + lbtf_cleanup_and_insert_cmd(priv, &cmdarray[i]); + } + return 0; +} + +/** + * lbtf_free_cmd_buffer - Frees the cmd buffer. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 + */ +int lbtf_free_cmd_buffer(struct lbtf_private *priv) +{ + struct cmd_ctrl_node *cmdarray; + unsigned int i; + + /* need to check if cmd array is allocated or not */ + if (priv->cmd_array == NULL) + return 0; + + cmdarray = priv->cmd_array; + + /* Release shared memory buffers */ + for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { + kfree(cmdarray[i].cmdbuf); + cmdarray[i].cmdbuf = NULL; + } + + /* Release cmd_ctrl_node */ + kfree(priv->cmd_array); + priv->cmd_array = NULL; + + return 0; +} + +/** + * lbtf_get_cmd_ctrl_node - Gets free cmd node from free cmd queue. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: pointer to a struct cmd_ctrl_node or NULL if none available. + */ +static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv) +{ + struct cmd_ctrl_node *tempnode; + unsigned long flags; + + if (!priv) + return NULL; + + spin_lock_irqsave(&priv->driver_lock, flags); + + if (!list_empty(&priv->cmdfreeq)) { + tempnode = list_first_entry(&priv->cmdfreeq, + struct cmd_ctrl_node, list); + list_del(&tempnode->list); + } else + tempnode = NULL; + + spin_unlock_irqrestore(&priv->driver_lock, flags); + + return tempnode; +} + +/** + * lbtf_execute_next_command: execute next command in cmd pending queue. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success. + */ +int lbtf_execute_next_command(struct lbtf_private *priv) +{ + struct cmd_ctrl_node *cmdnode = NULL; + struct cmd_header *cmd; + unsigned long flags; + + /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the + * only caller to us is lbtf_thread() and we get even when a + * data packet is received */ + + spin_lock_irqsave(&priv->driver_lock, flags); + + if (priv->cur_cmd) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + return -1; + } + + if (!list_empty(&priv->cmdpendingq)) { + cmdnode = list_first_entry(&priv->cmdpendingq, + struct cmd_ctrl_node, list); + } + + if (cmdnode) { + cmd = cmdnode->cmdbuf; + + list_del(&cmdnode->list); + spin_unlock_irqrestore(&priv->driver_lock, flags); + lbtf_submit_command(priv, cmdnode); + } else + spin_unlock_irqrestore(&priv->driver_lock, flags); + return 0; +} + +static struct cmd_ctrl_node *__lbtf_cmd_async(struct lbtf_private *priv, + uint16_t command, struct cmd_header *in_cmd, int in_cmd_size, + int (*callback)(struct lbtf_private *, unsigned long, + struct cmd_header *), + unsigned long callback_arg) +{ + struct cmd_ctrl_node *cmdnode; + + if (priv->surpriseremoved) + return ERR_PTR(-ENOENT); + + cmdnode = lbtf_get_cmd_ctrl_node(priv); + if (cmdnode == NULL) { + /* Wake up main thread to execute next command */ + queue_work(lbtf_wq, &priv->cmd_work); + return ERR_PTR(-ENOBUFS); + } + + cmdnode->callback = callback; + cmdnode->callback_arg = callback_arg; + + /* Copy the incoming command to the buffer */ + memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); + + /* Set sequence number, clean result, move to buffer */ + priv->seqnum++; + cmdnode->cmdbuf->command = cpu_to_le16(command); + cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); + cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); + cmdnode->cmdbuf->result = 0; + cmdnode->cmdwaitqwoken = 0; + lbtf_queue_cmd(priv, cmdnode); + queue_work(lbtf_wq, &priv->cmd_work); + + return cmdnode; +} + +void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size) +{ + __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, NULL, 0); +} + +int __lbtf_cmd(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size, + int (*callback)(struct lbtf_private *, + unsigned long, struct cmd_header *), + unsigned long callback_arg) +{ + struct cmd_ctrl_node *cmdnode; + unsigned long flags; + int ret = 0; + + cmdnode = __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, + callback, callback_arg); + if (IS_ERR(cmdnode)) + return PTR_ERR(cmdnode); + + might_sleep(); + ret = wait_event_interruptible(cmdnode->cmdwait_q, + cmdnode->cmdwaitqwoken); + if (ret) { + printk(KERN_DEBUG + "libertastf: command 0x%04x interrupted by signal", + command); + return ret; + } + + spin_lock_irqsave(&priv->driver_lock, flags); + ret = cmdnode->result; + if (ret) + printk(KERN_DEBUG "libertastf: command 0x%04x failed: %d\n", + command, ret); + + __lbtf_cleanup_and_insert_cmd(priv, cmdnode); + spin_unlock_irqrestore(&priv->driver_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(__lbtf_cmd); + +/* Call holding driver_lock */ +void lbtf_cmd_response_rx(struct lbtf_private *priv) +{ + priv->cmd_response_rxed = 1; + queue_work(lbtf_wq, &priv->cmd_work); +} +EXPORT_SYMBOL_GPL(lbtf_cmd_response_rx); + +int lbtf_process_rx_command(struct lbtf_private *priv) +{ + uint16_t respcmd, curcmd; + struct cmd_header *resp; + int ret = 0; + unsigned long flags; + uint16_t result; + + mutex_lock(&priv->lock); + spin_lock_irqsave(&priv->driver_lock, flags); + + if (!priv->cur_cmd) { + ret = -1; + spin_unlock_irqrestore(&priv->driver_lock, flags); + goto done; + } + + resp = (void *)priv->cmd_resp_buff; + curcmd = le16_to_cpu(priv->cur_cmd->cmdbuf->command); + respcmd = le16_to_cpu(resp->command); + result = le16_to_cpu(resp->result); + + if (net_ratelimit()) + printk(KERN_DEBUG "libertastf: cmd response 0x%04x, seq %d, size %d\n", + respcmd, le16_to_cpu(resp->seqnum), + le16_to_cpu(resp->size)); + + if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + ret = -1; + goto done; + } + if (respcmd != CMD_RET(curcmd)) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + ret = -1; + goto done; + } + + if (resp->result == cpu_to_le16(0x0004)) { + /* 0x0004 means -EAGAIN. Drop the response, let it time out + and be resubmitted */ + spin_unlock_irqrestore(&priv->driver_lock, flags); + ret = -1; + goto done; + } + + /* Now we got response from FW, cancel the command timer */ + del_timer(&priv->command_timer); + priv->cmd_timed_out = 0; + if (priv->nr_retries) + priv->nr_retries = 0; + + /* If the command is not successful, cleanup and return failure */ + if ((result != 0 || !(respcmd & 0x8000))) { + /* + * Handling errors here + */ + switch (respcmd) { + case CMD_RET(CMD_GET_HW_SPEC): + case CMD_RET(CMD_802_11_RESET): + printk(KERN_DEBUG "libertastf: reset failed\n"); + break; + + } + lbtf_complete_command(priv, priv->cur_cmd, result); + spin_unlock_irqrestore(&priv->driver_lock, flags); + + ret = -1; + goto done; + } + + spin_unlock_irqrestore(&priv->driver_lock, flags); + + if (priv->cur_cmd && priv->cur_cmd->callback) { + ret = priv->cur_cmd->callback(priv, priv->cur_cmd->callback_arg, + resp); + } + spin_lock_irqsave(&priv->driver_lock, flags); + + if (priv->cur_cmd) { + /* Clean up and Put current command back to cmdfreeq */ + lbtf_complete_command(priv, priv->cur_cmd, result); + } + spin_unlock_irqrestore(&priv->driver_lock, flags); + +done: + mutex_unlock(&priv->lock); + return ret; +} diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c new file mode 100644 index 00000000000..1cc03a8dd67 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -0,0 +1,766 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <linux/delay.h> +#include <linux/moduleparam.h> +#include <linux/firmware.h> +#include <linux/netdevice.h> +#include <linux/usb.h> + +#define DRV_NAME "lbtf_usb" + +#include "libertas_tf.h" +#include "if_usb.h" + +#define MESSAGE_HEADER_LEN 4 + +static char *lbtf_fw_name = "lbtf_usb.bin"; +module_param_named(fw_name, lbtf_fw_name, charp, 0644); + +static struct usb_device_id if_usb_table[] = { + /* Enter the device signature inside */ + { USB_DEVICE(0x1286, 0x2001) }, + { USB_DEVICE(0x05a3, 0x8388) }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, if_usb_table); + +static void if_usb_receive(struct urb *urb); +static void if_usb_receive_fwload(struct urb *urb); +static int if_usb_prog_firmware(struct if_usb_card *cardp); +static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type, + uint8_t *payload, uint16_t nb); +static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, + uint16_t nb, u8 data); +static void if_usb_free(struct if_usb_card *cardp); +static int if_usb_submit_rx_urb(struct if_usb_card *cardp); +static int if_usb_reset_device(struct if_usb_card *cardp); + +/** + * if_usb_wrike_bulk_callback - call back to handle URB status + * + * @param urb pointer to urb structure + */ +static void if_usb_write_bulk_callback(struct urb *urb) +{ + if (urb->status != 0) + printk(KERN_INFO "libertastf: URB in failure status: %d\n", + urb->status); +} + +/** + * if_usb_free - free tx/rx urb, skb and rx buffer + * + * @param cardp pointer if_usb_card + */ +static void if_usb_free(struct if_usb_card *cardp) +{ + /* Unlink tx & rx urb */ + usb_kill_urb(cardp->tx_urb); + usb_kill_urb(cardp->rx_urb); + usb_kill_urb(cardp->cmd_urb); + + usb_free_urb(cardp->tx_urb); + cardp->tx_urb = NULL; + + usb_free_urb(cardp->rx_urb); + cardp->rx_urb = NULL; + + usb_free_urb(cardp->cmd_urb); + cardp->cmd_urb = NULL; + + kfree(cardp->ep_out_buf); + cardp->ep_out_buf = NULL; +} + +static void if_usb_setup_firmware(struct lbtf_private *priv) +{ + struct if_usb_card *cardp = priv->card; + struct cmd_ds_set_boot2_ver b2_cmd; + + if_usb_submit_rx_urb(cardp); + b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd)); + b2_cmd.action = 0; + b2_cmd.version = cardp->boot2_version; + + if (lbtf_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd)) + printk(KERN_INFO "libertastf: setting boot2 version failed\n"); +} + +static void if_usb_fw_timeo(unsigned long priv) +{ + struct if_usb_card *cardp = (void *)priv; + + if (!cardp->fwdnldover) + /* Download timed out */ + cardp->priv->surpriseremoved = 1; + wake_up(&cardp->fw_wq); +} + +/** + * if_usb_probe - sets the configuration values + * + * @ifnum interface number + * @id pointer to usb_device_id + * + * Returns: 0 on success, error code on failure + */ +static int if_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + struct lbtf_private *priv; + struct if_usb_card *cardp; + int i; + + udev = interface_to_usbdev(intf); + + cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL); + if (!cardp) + goto error; + + setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp); + init_waitqueue_head(&cardp->fw_wq); + + cardp->udev = udev; + iface_desc = intf->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (usb_endpoint_is_bulk_in(endpoint)) { + cardp->ep_in_size = + le16_to_cpu(endpoint->wMaxPacketSize); + cardp->ep_in = usb_endpoint_num(endpoint); + } else if (usb_endpoint_is_bulk_out(endpoint)) { + cardp->ep_out_size = + le16_to_cpu(endpoint->wMaxPacketSize); + cardp->ep_out = usb_endpoint_num(endpoint); + } + } + if (!cardp->ep_out_size || !cardp->ep_in_size) + /* Endpoints not found */ + goto dealloc; + + cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!cardp->rx_urb) + goto dealloc; + + cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!cardp->tx_urb) + goto dealloc; + + cardp->cmd_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!cardp->cmd_urb) + goto dealloc; + + cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, + GFP_KERNEL); + if (!cardp->ep_out_buf) + goto dealloc; + + priv = lbtf_add_card(cardp, &udev->dev); + if (!priv) + goto dealloc; + + cardp->priv = priv; + + priv->hw_host_to_card = if_usb_host_to_card; + priv->hw_prog_firmware = if_usb_prog_firmware; + priv->hw_reset_device = if_usb_reset_device; + cardp->boot2_version = udev->descriptor.bcdDevice; + + usb_get_dev(udev); + usb_set_intfdata(intf, cardp); + + return 0; + +dealloc: + if_usb_free(cardp); +error: + return -ENOMEM; +} + +/** + * if_usb_disconnect - free resource and cleanup + * + * @intf USB interface structure + */ +static void if_usb_disconnect(struct usb_interface *intf) +{ + struct if_usb_card *cardp = usb_get_intfdata(intf); + struct lbtf_private *priv = (struct lbtf_private *) cardp->priv; + + if_usb_reset_device(cardp); + + if (priv) + lbtf_remove_card(priv); + + /* Unlink and free urb */ + if_usb_free(cardp); + + usb_set_intfdata(intf, NULL); + usb_put_dev(interface_to_usbdev(intf)); +} + +/** + * if_usb_send_fw_pkt - This function downloads the FW + * + * @priv pointer to struct lbtf_private + * + * Returns: 0 + */ +static int if_usb_send_fw_pkt(struct if_usb_card *cardp) +{ + struct fwdata *fwdata = cardp->ep_out_buf; + u8 *firmware = (u8 *) cardp->fw->data; + + /* If we got a CRC failure on the last block, back + up and retry it */ + if (!cardp->CRC_OK) { + cardp->totalbytes = cardp->fwlastblksent; + cardp->fwseqnum--; + } + + /* struct fwdata (which we sent to the card) has an + extra __le32 field in between the header and the data, + which is not in the struct fwheader in the actual + firmware binary. Insert the seqnum in the middle... */ + memcpy(&fwdata->hdr, &firmware[cardp->totalbytes], + sizeof(struct fwheader)); + + cardp->fwlastblksent = cardp->totalbytes; + cardp->totalbytes += sizeof(struct fwheader); + + memcpy(fwdata->data, &firmware[cardp->totalbytes], + le32_to_cpu(fwdata->hdr.datalength)); + + fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum); + cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength); + + usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) + + le32_to_cpu(fwdata->hdr.datalength), 0); + + if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) + /* Host has finished FW downloading + * Donwloading FW JUMP BLOCK + */ + cardp->fwfinalblk = 1; + + return 0; +} + +static int if_usb_reset_device(struct if_usb_card *cardp) +{ + struct cmd_ds_802_11_reset *cmd = cardp->ep_out_buf + 4; + int ret; + + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); + + cmd->hdr.command = cpu_to_le16(CMD_802_11_RESET); + cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset)); + cmd->hdr.result = cpu_to_le16(0); + cmd->hdr.seqnum = cpu_to_le16(0x5a5a); + cmd->action = cpu_to_le16(CMD_ACT_HALT); + usb_tx_block(cardp, cardp->ep_out_buf, + 4 + sizeof(struct cmd_ds_802_11_reset), 0); + + msleep(100); + ret = usb_reset_device(cardp->udev); + msleep(100); + + return ret; +} +EXPORT_SYMBOL_GPL(if_usb_reset_device); + +/** + * usb_tx_block - transfer data to the device + * + * @priv pointer to struct lbtf_private + * @payload pointer to payload data + * @nb data length + * @data non-zero for data, zero for commands + * + * Returns: 0 on success, nonzero otherwise. + */ +static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, + uint16_t nb, u8 data) +{ + struct urb *urb; + + /* check if device is removed */ + if (cardp->priv->surpriseremoved) + return -1; + + if (data) + urb = cardp->tx_urb; + else + urb = cardp->cmd_urb; + + usb_fill_bulk_urb(urb, cardp->udev, + usb_sndbulkpipe(cardp->udev, + cardp->ep_out), + payload, nb, if_usb_write_bulk_callback, cardp); + + urb->transfer_flags |= URB_ZERO_PACKET; + + if (usb_submit_urb(urb, GFP_ATOMIC)) + return -1; + return 0; +} + +static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, + void (*callbackfn)(struct urb *urb)) +{ + struct sk_buff *skb; + + skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); + if (!skb) + return -1; + + cardp->rx_skb = skb; + + /* Fill the receive configuration URB and initialise the Rx call back */ + usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, + usb_rcvbulkpipe(cardp->udev, cardp->ep_in), + (void *) (skb->tail), + MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); + + cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; + + if (usb_submit_urb(cardp->rx_urb, GFP_ATOMIC)) { + kfree_skb(skb); + cardp->rx_skb = NULL; + return -1; + } else + return 0; +} + +static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp) +{ + return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload); +} + +static int if_usb_submit_rx_urb(struct if_usb_card *cardp) +{ + return __if_usb_submit_rx_urb(cardp, &if_usb_receive); +} + +static void if_usb_receive_fwload(struct urb *urb) +{ + struct if_usb_card *cardp = urb->context; + struct sk_buff *skb = cardp->rx_skb; + struct fwsyncheader *syncfwheader; + struct bootcmdresp bcmdresp; + + if (urb->status) { + kfree_skb(skb); + return; + } + + if (cardp->fwdnldover) { + __le32 *tmp = (__le32 *)(skb->data); + + if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) && + tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) + /* Firmware ready event received */ + wake_up(&cardp->fw_wq); + else + if_usb_submit_rx_urb_fwload(cardp); + kfree_skb(skb); + return; + } + if (cardp->bootcmdresp <= 0) { + memcpy(&bcmdresp, skb->data, sizeof(bcmdresp)); + + if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) { + kfree_skb(skb); + if_usb_submit_rx_urb_fwload(cardp); + cardp->bootcmdresp = 1; + /* Received valid boot command response */ + return; + } + if (bcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) { + if (bcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) || + bcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) || + bcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) + cardp->bootcmdresp = -1; + } else if (bcmdresp.cmd == BOOT_CMD_FW_BY_USB && + bcmdresp.result == BOOT_CMD_RESP_OK) + cardp->bootcmdresp = 1; + + kfree_skb(skb); + if_usb_submit_rx_urb_fwload(cardp); + return; + } + + syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC); + if (!syncfwheader) { + kfree_skb(skb); + return; + } + + memcpy(syncfwheader, skb->data, sizeof(struct fwsyncheader)); + + if (!syncfwheader->cmd) + cardp->CRC_OK = 1; + else + cardp->CRC_OK = 0; + kfree_skb(skb); + + /* reschedule timer for 200ms hence */ + mod_timer(&cardp->fw_timeout, jiffies + (HZ/5)); + + if (cardp->fwfinalblk) { + cardp->fwdnldover = 1; + goto exit; + } + + if_usb_send_fw_pkt(cardp); + + exit: + if_usb_submit_rx_urb_fwload(cardp); + + kfree(syncfwheader); + + return; +} + +#define MRVDRV_MIN_PKT_LEN 30 + +static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb, + struct if_usb_card *cardp, + struct lbtf_private *priv) +{ + if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN + || recvlength < MRVDRV_MIN_PKT_LEN) { + kfree_skb(skb); + return; + } + + skb_put(skb, recvlength); + skb_pull(skb, MESSAGE_HEADER_LEN); + lbtf_rx(priv, skb); +} + +static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff, + struct sk_buff *skb, + struct if_usb_card *cardp, + struct lbtf_private *priv) +{ + if (recvlength > LBS_CMD_BUFFER_SIZE) { + kfree_skb(skb); + return; + } + + if (!in_interrupt()) + BUG(); + + spin_lock(&priv->driver_lock); + memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN, + recvlength - MESSAGE_HEADER_LEN); + kfree_skb(skb); + lbtf_cmd_response_rx(priv); + spin_unlock(&priv->driver_lock); +} + +/** + * if_usb_receive - read data received from the device. + * + * @urb pointer to struct urb + */ +static void if_usb_receive(struct urb *urb) +{ + struct if_usb_card *cardp = urb->context; + struct sk_buff *skb = cardp->rx_skb; + struct lbtf_private *priv = cardp->priv; + int recvlength = urb->actual_length; + uint8_t *recvbuff = NULL; + uint32_t recvtype = 0; + __le32 *pkt = (__le32 *) skb->data; + + if (recvlength) { + if (urb->status) { + kfree_skb(skb); + goto setup_for_next; + } + + recvbuff = skb->data; + recvtype = le32_to_cpu(pkt[0]); + } else if (urb->status) { + kfree_skb(skb); + return; + } + + switch (recvtype) { + case CMD_TYPE_DATA: + process_cmdtypedata(recvlength, skb, cardp, priv); + break; + + case CMD_TYPE_REQUEST: + process_cmdrequest(recvlength, recvbuff, skb, cardp, priv); + break; + + case CMD_TYPE_INDICATION: + { + /* Event cause handling */ + u32 event_cause = le32_to_cpu(pkt[1]); + + /* Icky undocumented magic special case */ + if (event_cause & 0xffff0000) { + u16 tmp; + u8 retrycnt; + u8 failure; + + tmp = event_cause >> 16; + retrycnt = tmp & 0x00ff; + failure = (tmp & 0xff00) >> 8; + lbtf_send_tx_feedback(priv, retrycnt, failure); + } else if (event_cause == LBTF_EVENT_BCN_SENT) + lbtf_bcn_sent(priv); + else + printk(KERN_DEBUG + "Unsupported notification %d received\n", + event_cause); + kfree_skb(skb); + break; + } + default: + printk(KERN_DEBUG "libertastf: unknown command type 0x%X\n", + recvtype); + kfree_skb(skb); + break; + } + +setup_for_next: + if_usb_submit_rx_urb(cardp); +} + +/** + * if_usb_host_to_card - Download data to the device + * + * @priv pointer to struct lbtf_private structure + * @type type of data + * @buf pointer to data buffer + * @len number of bytes + * + * Returns: 0 on success, nonzero otherwise + */ +static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type, + uint8_t *payload, uint16_t nb) +{ + struct if_usb_card *cardp = priv->card; + u8 data = 0; + + if (type == MVMS_CMD) { + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); + } else { + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA); + data = 1; + } + + memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb); + + return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN, + data); +} + +/** + * if_usb_issue_boot_command - Issue boot command to Boot2. + * + * @ivalue 1 boots from FW by USB-Download, 2 boots from FW in EEPROM. + * + * Returns: 0 + */ +static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue) +{ + struct bootcmd *bootcmd = cardp->ep_out_buf; + + /* Prepare command */ + bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER); + bootcmd->cmd = ivalue; + memset(bootcmd->pad, 0, sizeof(bootcmd->pad)); + + /* Issue command */ + usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd), 0); + + return 0; +} + + +/** + * check_fwfile_format - Check the validity of Boot2/FW image. + * + * @data pointer to image + * @totlen image length + * + * Returns: 0 if the image is valid, nonzero otherwise. + */ +static int check_fwfile_format(const u8 *data, u32 totlen) +{ + u32 bincmd, exit; + u32 blksize, offset, len; + int ret; + + ret = 1; + exit = len = 0; + + do { + struct fwheader *fwh = (void *) data; + + bincmd = le32_to_cpu(fwh->dnldcmd); + blksize = le32_to_cpu(fwh->datalength); + switch (bincmd) { + case FW_HAS_DATA_TO_RECV: + offset = sizeof(struct fwheader) + blksize; + data += offset; + len += offset; + if (len >= totlen) + exit = 1; + break; + case FW_HAS_LAST_BLOCK: + exit = 1; + ret = 0; + break; + default: + exit = 1; + break; + } + } while (!exit); + + if (ret) + printk(KERN_INFO + "libertastf: firmware file format check failed\n"); + return ret; +} + + +static int if_usb_prog_firmware(struct if_usb_card *cardp) +{ + int i = 0; + static int reset_count = 10; + int ret = 0; + + ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev); + if (ret < 0) { + printk(KERN_INFO "libertastf: firmware %s not found\n", + lbtf_fw_name); + goto done; + } + + if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) + goto release_fw; + +restart: + if (if_usb_submit_rx_urb_fwload(cardp) < 0) { + ret = -1; + goto release_fw; + } + + cardp->bootcmdresp = 0; + do { + int j = 0; + i++; + /* Issue Boot command = 1, Boot from Download-FW */ + if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB); + /* wait for command response */ + do { + j++; + msleep_interruptible(100); + } while (cardp->bootcmdresp == 0 && j < 10); + } while (cardp->bootcmdresp == 0 && i < 5); + + if (cardp->bootcmdresp <= 0) { + if (--reset_count >= 0) { + if_usb_reset_device(cardp); + goto restart; + } + return -1; + } + + i = 0; + + cardp->totalbytes = 0; + cardp->fwlastblksent = 0; + cardp->CRC_OK = 1; + cardp->fwdnldover = 0; + cardp->fwseqnum = -1; + cardp->totalbytes = 0; + cardp->fwfinalblk = 0; + + /* Send the first firmware packet... */ + if_usb_send_fw_pkt(cardp); + + /* ... and wait for the process to complete */ + wait_event_interruptible(cardp->fw_wq, cardp->priv->surpriseremoved || + cardp->fwdnldover); + + del_timer_sync(&cardp->fw_timeout); + usb_kill_urb(cardp->rx_urb); + + if (!cardp->fwdnldover) { + printk(KERN_INFO "libertastf: failed to load fw," + " resetting device!\n"); + if (--reset_count >= 0) { + if_usb_reset_device(cardp); + goto restart; + } + + printk(KERN_INFO "libertastf: fw download failure\n"); + ret = -1; + goto release_fw; + } + + cardp->priv->fw_ready = 1; + + release_fw: + release_firmware(cardp->fw); + cardp->fw = NULL; + + if_usb_setup_firmware(cardp->priv); + + done: + return ret; +} +EXPORT_SYMBOL_GPL(if_usb_prog_firmware); + + +#define if_usb_suspend NULL +#define if_usb_resume NULL + +static struct usb_driver if_usb_driver = { + .name = DRV_NAME, + .probe = if_usb_probe, + .disconnect = if_usb_disconnect, + .id_table = if_usb_table, + .suspend = if_usb_suspend, + .resume = if_usb_resume, +}; + +static int __init if_usb_init_module(void) +{ + int ret = 0; + + ret = usb_register(&if_usb_driver); + return ret; +} + +static void __exit if_usb_exit_module(void) +{ + usb_deregister(&if_usb_driver); +} + +module_init(if_usb_init_module); +module_exit(if_usb_exit_module); + +MODULE_DESCRIPTION("8388 USB WLAN Thinfirm Driver"); +MODULE_AUTHOR("Cozybit Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/libertas_tf/if_usb.h b/drivers/net/wireless/libertas_tf/if_usb.h new file mode 100644 index 00000000000..6fa5b3f59ef --- /dev/null +++ b/drivers/net/wireless/libertas_tf/if_usb.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <linux/wait.h> +#include <linux/timer.h> + +struct lbtf_private; + +/** + * This file contains definition for USB interface. + */ +#define CMD_TYPE_REQUEST 0xF00DFACE +#define CMD_TYPE_DATA 0xBEADC0DE +#define CMD_TYPE_INDICATION 0xBEEFFACE + +#define BOOT_CMD_FW_BY_USB 0x01 +#define BOOT_CMD_FW_IN_EEPROM 0x02 +#define BOOT_CMD_UPDATE_BOOT2 0x03 +#define BOOT_CMD_UPDATE_FW 0x04 +#define BOOT_CMD_MAGIC_NUMBER 0x4C56524D /* LVRM */ + +struct bootcmd { + __le32 magic; + uint8_t cmd; + uint8_t pad[11]; +}; + +#define BOOT_CMD_RESP_OK 0x0001 +#define BOOT_CMD_RESP_FAIL 0x0000 + +struct bootcmdresp { + __le32 magic; + uint8_t cmd; + uint8_t result; + uint8_t pad[2]; +}; + +/** USB card description structure*/ +struct if_usb_card { + struct usb_device *udev; + struct urb *rx_urb, *tx_urb, *cmd_urb; + struct lbtf_private *priv; + + struct sk_buff *rx_skb; + + uint8_t ep_in; + uint8_t ep_out; + + int8_t bootcmdresp; + + int ep_in_size; + + void *ep_out_buf; + int ep_out_size; + + const struct firmware *fw; + struct timer_list fw_timeout; + wait_queue_head_t fw_wq; + uint32_t fwseqnum; + uint32_t totalbytes; + uint32_t fwlastblksent; + uint8_t CRC_OK; + uint8_t fwdnldover; + uint8_t fwfinalblk; + + __le16 boot2_version; +}; + +/** fwheader */ +struct fwheader { + __le32 dnldcmd; + __le32 baseaddr; + __le32 datalength; + __le32 CRC; +}; + +#define FW_MAX_DATA_BLK_SIZE 600 +/** FWData */ +struct fwdata { + struct fwheader hdr; + __le32 seqnum; + uint8_t data[0]; +}; + +/** fwsyncheader */ +struct fwsyncheader { + __le32 cmd; + __le32 seqnum; +}; + +#define FW_HAS_DATA_TO_RECV 0x00000001 +#define FW_HAS_LAST_BLOCK 0x00000004 diff --git a/drivers/net/wireless/libertas_tf/libertas_tf.h b/drivers/net/wireless/libertas_tf/libertas_tf.h new file mode 100644 index 00000000000..8995cd7c29b --- /dev/null +++ b/drivers/net/wireless/libertas_tf/libertas_tf.h @@ -0,0 +1,514 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2007, Red Hat, Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/kthread.h> +#include <net/mac80211.h> + +#ifndef DRV_NAME +#define DRV_NAME "libertas_tf" +#endif + +#define MRVL_DEFAULT_RETRIES 9 +#define MRVL_PER_PACKET_RATE 0x10 +#define MRVL_MAX_BCN_SIZE 440 +#define CMD_OPTION_WAITFORRSP 0x0002 + +/* Return command are almost always the same as the host command, but with + * bit 15 set high. There are a few exceptions, though... + */ +#define CMD_RET(cmd) (0x8000 | cmd) + +/* Command codes */ +#define CMD_GET_HW_SPEC 0x0003 +#define CMD_802_11_RESET 0x0005 +#define CMD_MAC_MULTICAST_ADR 0x0010 +#define CMD_802_11_RADIO_CONTROL 0x001c +#define CMD_802_11_RF_CHANNEL 0x001d +#define CMD_802_11_RF_TX_POWER 0x001e +#define CMD_MAC_CONTROL 0x0028 +#define CMD_802_11_MAC_ADDRESS 0x004d +#define CMD_SET_BOOT2_VER 0x00a5 +#define CMD_802_11_BEACON_CTRL 0x00b0 +#define CMD_802_11_BEACON_SET 0x00cb +#define CMD_802_11_SET_MODE 0x00cc +#define CMD_802_11_SET_BSSID 0x00cd + +#define CMD_ACT_GET 0x0000 +#define CMD_ACT_SET 0x0001 + +/* Define action or option for CMD_802_11_RESET */ +#define CMD_ACT_HALT 0x0003 + +/* Define action or option for CMD_MAC_CONTROL */ +#define CMD_ACT_MAC_RX_ON 0x0001 +#define CMD_ACT_MAC_TX_ON 0x0002 +#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 +#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 +#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 +#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 + +/* Define action or option for CMD_802_11_RADIO_CONTROL */ +#define CMD_TYPE_AUTO_PREAMBLE 0x0001 +#define CMD_TYPE_SHORT_PREAMBLE 0x0002 +#define CMD_TYPE_LONG_PREAMBLE 0x0003 + +#define TURN_ON_RF 0x01 +#define RADIO_ON 0x01 +#define RADIO_OFF 0x00 + +#define SET_AUTO_PREAMBLE 0x05 +#define SET_SHORT_PREAMBLE 0x03 +#define SET_LONG_PREAMBLE 0x01 + +/* Define action or option for CMD_802_11_RF_CHANNEL */ +#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 +#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 + +/* Codes for CMD_802_11_SET_MODE */ +enum lbtf_mode { + LBTF_PASSIVE_MODE, + LBTF_STA_MODE, + LBTF_AP_MODE, +}; + +/** Card Event definition */ +#define MACREG_INT_CODE_FIRMWARE_READY 48 +/** Buffer Constants */ + +/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical +* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas +* driver has more local TxPDs. Each TxPD on the host memory is associated +* with a Tx control node. The driver maintains 8 RxPD descriptors for +* station firmware to store Rx packet information. +* +* Current version of MAC has a 32x6 multicast address buffer. +* +* 802.11b can have up to 14 channels, the driver keeps the +* BSSID(MAC address) of each APs or Ad hoc stations it has sensed. +*/ + +#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32 +#define LBS_NUM_CMD_BUFFERS 10 +#define LBS_CMD_BUFFER_SIZE (2 * 1024) +#define MRVDRV_MAX_CHANNEL_SIZE 14 +#define MRVDRV_SNAP_HEADER_LEN 8 + +#define LBS_UPLD_SIZE 2312 +#define DEV_NAME_LEN 32 + +/** Misc constants */ +/* This section defines 802.11 specific contants */ + +#define MRVDRV_MAX_REGION_CODE 6 +/** + * the table to keep region code + */ +#define LBTF_REGDOMAIN_US 0x10 +#define LBTF_REGDOMAIN_CA 0x20 +#define LBTF_REGDOMAIN_EU 0x30 +#define LBTF_REGDOMAIN_SP 0x31 +#define LBTF_REGDOMAIN_FR 0x32 +#define LBTF_REGDOMAIN_JP 0x40 + +#define SBI_EVENT_CAUSE_SHIFT 3 + +/** RxPD status */ + +#define MRVDRV_RXPD_STATUS_OK 0x0001 + + +/* This is for firmware specific length */ +#define EXTRA_LEN 36 + +#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \ + (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN) + +#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \ + (ETH_FRAME_LEN + sizeof(struct rxpd) \ + + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN) + +#define CMD_F_HOSTCMD (1 << 0) +#define FW_CAPINFO_WPA (1 << 0) + +#define RF_ANTENNA_1 0x1 +#define RF_ANTENNA_2 0x2 +#define RF_ANTENNA_AUTO 0xFFFF + +#define LBTF_EVENT_BCN_SENT 55 + +/** Global Variable Declaration */ +/** mv_ms_type */ +enum mv_ms_type { + MVMS_DAT = 0, + MVMS_CMD = 1, + MVMS_TXDONE = 2, + MVMS_EVENT +}; + +extern struct workqueue_struct *lbtf_wq; + +struct lbtf_private; + +struct lbtf_offset_value { + u32 offset; + u32 value; +}; + +struct channel_range { + u8 regdomain; + u8 start; + u8 end; /* exclusive (channel must be less than end) */ +}; + +struct if_usb_card; + +/** Private structure for the MV device */ +struct lbtf_private { + void *card; + struct ieee80211_hw *hw; + + /* Command response buffer */ + u8 cmd_resp_buff[LBS_UPLD_SIZE]; + /* Download sent: + bit0 1/0=data_sent/data_tx_done, + bit1 1/0=cmd_sent/cmd_tx_done, + all other bits reserved 0 */ + struct ieee80211_vif *vif; + + struct work_struct cmd_work; + struct work_struct tx_work; + /** Hardware access */ + int (*hw_host_to_card) (struct lbtf_private *priv, u8 type, u8 *payload, u16 nb); + int (*hw_prog_firmware) (struct if_usb_card *cardp); + int (*hw_reset_device) (struct if_usb_card *cardp); + + + /** Wlan adapter data structure*/ + /** STATUS variables */ + u32 fwrelease; + u32 fwcapinfo; + /* protected with big lock */ + + struct mutex lock; + + /** command-related variables */ + u16 seqnum; + /* protected by big lock */ + + struct cmd_ctrl_node *cmd_array; + /** Current command */ + struct cmd_ctrl_node *cur_cmd; + /** command Queues */ + /** Free command buffers */ + struct list_head cmdfreeq; + /** Pending command buffers */ + struct list_head cmdpendingq; + + /** spin locks */ + spinlock_t driver_lock; + + /** Timers */ + struct timer_list command_timer; + int nr_retries; + int cmd_timed_out; + + u8 cmd_response_rxed; + + /** capability Info used in Association, start, join */ + u16 capability; + + /** MAC address information */ + u8 current_addr[ETH_ALEN]; + u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN]; + u32 nr_of_multicastmacaddr; + int cur_freq; + + struct sk_buff *skb_to_tx; + struct sk_buff *tx_skb; + + /** NIC Operation characteristics */ + u16 mac_control; + u16 regioncode; + struct channel_range range; + + u8 radioon; + u32 preamble; + + struct ieee80211_channel channels[14]; + struct ieee80211_rate rates[12]; + struct ieee80211_supported_band band; + struct lbtf_offset_value offsetvalue; + + u8 fw_ready; + u8 surpriseremoved; + struct sk_buff_head bc_ps_buf; +}; + +/* 802.11-related definitions */ + +/* TxPD descriptor */ +struct txpd { + /* Current Tx packet status */ + __le32 tx_status; + /* Tx control */ + __le32 tx_control; + __le32 tx_packet_location; + /* Tx packet length */ + __le16 tx_packet_length; + /* First 2 byte of destination MAC address */ + u8 tx_dest_addr_high[2]; + /* Last 4 byte of destination MAC address */ + u8 tx_dest_addr_low[4]; + /* Pkt Priority */ + u8 priority; + /* Pkt Trasnit Power control */ + u8 powermgmt; + /* Time the packet has been queued in the driver (units = 2ms) */ + u8 pktdelay_2ms; + /* reserved */ + u8 reserved1; +}; + +/* RxPD Descriptor */ +struct rxpd { + /* Current Rx packet status */ + __le16 status; + + /* SNR */ + u8 snr; + + /* Tx control */ + u8 rx_control; + + /* Pkt length */ + __le16 pkt_len; + + /* Noise Floor */ + u8 nf; + + /* Rx Packet Rate */ + u8 rx_rate; + + /* Pkt addr */ + __le32 pkt_ptr; + + /* Next Rx RxPD addr */ + __le32 next_rxpd_ptr; + + /* Pkt Priority */ + u8 priority; + u8 reserved[3]; +}; + +struct cmd_header { + __le16 command; + __le16 size; + __le16 seqnum; + __le16 result; +} __attribute__ ((packed)); + +struct cmd_ctrl_node { + struct list_head list; + int result; + /* command response */ + int (*callback)(struct lbtf_private *, + unsigned long, struct cmd_header *); + unsigned long callback_arg; + /* command data */ + struct cmd_header *cmdbuf; + /* wait queue */ + u16 cmdwaitqwoken; + wait_queue_head_t cmdwait_q; +}; + +/* + * Define data structure for CMD_GET_HW_SPEC + * This structure defines the response for the GET_HW_SPEC command + */ +struct cmd_ds_get_hw_spec { + struct cmd_header hdr; + + /* HW Interface version number */ + __le16 hwifversion; + /* HW version number */ + __le16 version; + /* Max number of TxPD FW can handle */ + __le16 nr_txpd; + /* Max no of Multicast address */ + __le16 nr_mcast_adr; + /* MAC address */ + u8 permanentaddr[6]; + + /* region Code */ + __le16 regioncode; + + /* Number of antenna used */ + __le16 nr_antenna; + + /* FW release number, example 0x01030304 = 2.3.4p1 */ + __le32 fwrelease; + + /* Base Address of TxPD queue */ + __le32 wcb_base; + /* Read Pointer of RxPd queue */ + __le32 rxpd_rdptr; + + /* Write Pointer of RxPd queue */ + __le32 rxpd_wrptr; + + /*FW/HW capability */ + __le32 fwcapinfo; +} __attribute__ ((packed)); + +struct cmd_ds_mac_control { + struct cmd_header hdr; + __le16 action; + u16 reserved; +}; + +struct cmd_ds_802_11_mac_address { + struct cmd_header hdr; + + __le16 action; + uint8_t macadd[ETH_ALEN]; +}; + +struct cmd_ds_mac_multicast_addr { + struct cmd_header hdr; + + __le16 action; + __le16 nr_of_adrs; + u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; +}; + +struct cmd_ds_set_mode { + struct cmd_header hdr; + + __le16 mode; +}; + +struct cmd_ds_set_bssid { + struct cmd_header hdr; + + u8 bssid[6]; + u8 activate; +}; + +struct cmd_ds_802_11_radio_control { + struct cmd_header hdr; + + __le16 action; + __le16 control; +}; + + +struct cmd_ds_802_11_rf_channel { + struct cmd_header hdr; + + __le16 action; + __le16 channel; + __le16 rftype; /* unused */ + __le16 reserved; /* unused */ + u8 channellist[32]; /* unused */ +}; + +struct cmd_ds_set_boot2_ver { + struct cmd_header hdr; + + __le16 action; + __le16 version; +}; + +struct cmd_ds_802_11_reset { + struct cmd_header hdr; + + __le16 action; +}; + +struct cmd_ds_802_11_beacon_control { + struct cmd_header hdr; + + __le16 action; + __le16 beacon_enable; + __le16 beacon_period; +}; + +struct cmd_ds_802_11_beacon_set { + struct cmd_header hdr; + + __le16 len; + u8 beacon[MRVL_MAX_BCN_SIZE]; +}; + +struct lbtf_private; +struct cmd_ctrl_node; + +/** Function Prototype Declaration */ +void lbtf_set_mac_control(struct lbtf_private *priv); + +int lbtf_free_cmd_buffer(struct lbtf_private *priv); + +int lbtf_allocate_cmd_buffer(struct lbtf_private *priv); +int lbtf_execute_next_command(struct lbtf_private *priv); +int lbtf_set_radio_control(struct lbtf_private *priv); +int lbtf_update_hw_spec(struct lbtf_private *priv); +int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv); +void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode); +void lbtf_set_bssid(struct lbtf_private *priv, bool activate, u8 *bssid); +int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr); + +int lbtf_set_channel(struct lbtf_private *priv, u8 channel); + +int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon); +int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable, + int beacon_int); + + +int lbtf_process_rx_command(struct lbtf_private *priv); +void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd, + int result); +void lbtf_cmd_response_rx(struct lbtf_private *priv); + +/* main.c */ +struct chan_freq_power *lbtf_get_region_cfp_table(u8 region, + int *cfp_no); +struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev); +int lbtf_remove_card(struct lbtf_private *priv); +int lbtf_start_card(struct lbtf_private *priv); +int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb); +void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail); +void lbtf_bcn_sent(struct lbtf_private *priv); + +/* support functions for cmd.c */ +/* lbtf_cmd() infers the size of the buffer to copy data back into, from + the size of the target of the pointer. Since the command to be sent + may often be smaller, that size is set in cmd->size by the caller.*/ +#define lbtf_cmd(priv, cmdnr, cmd, cb, cb_arg) ({ \ + uint16_t __sz = le16_to_cpu((cmd)->hdr.size); \ + (cmd)->hdr.size = cpu_to_le16(sizeof(*(cmd))); \ + __lbtf_cmd(priv, cmdnr, &(cmd)->hdr, __sz, cb, cb_arg); \ +}) + +#define lbtf_cmd_with_response(priv, cmdnr, cmd) \ + lbtf_cmd(priv, cmdnr, cmd, lbtf_cmd_copyback, (unsigned long) (cmd)) + +void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size); + +int __lbtf_cmd(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size, + int (*callback)(struct lbtf_private *, unsigned long, + struct cmd_header *), + unsigned long callback_arg); + +int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra, + struct cmd_header *resp); diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c new file mode 100644 index 00000000000..feff945ad85 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/main.c @@ -0,0 +1,662 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include "libertas_tf.h" +#include "linux/etherdevice.h" + +#define DRIVER_RELEASE_VERSION "004.p0" +/* thinfirm version: 5.132.X.pX */ +#define LBTF_FW_VER_MIN 0x05840300 +#define LBTF_FW_VER_MAX 0x0584ffff +#define QOS_CONTROL_LEN 2 + +static const char lbtf_driver_version[] = "THINFIRM-USB8388-" DRIVER_RELEASE_VERSION; +struct workqueue_struct *lbtf_wq; + +static const struct ieee80211_channel lbtf_channels[] = { + { .center_freq = 2412, .hw_value = 1 }, + { .center_freq = 2417, .hw_value = 2 }, + { .center_freq = 2422, .hw_value = 3 }, + { .center_freq = 2427, .hw_value = 4 }, + { .center_freq = 2432, .hw_value = 5 }, + { .center_freq = 2437, .hw_value = 6 }, + { .center_freq = 2442, .hw_value = 7 }, + { .center_freq = 2447, .hw_value = 8 }, + { .center_freq = 2452, .hw_value = 9 }, + { .center_freq = 2457, .hw_value = 10 }, + { .center_freq = 2462, .hw_value = 11 }, + { .center_freq = 2467, .hw_value = 12 }, + { .center_freq = 2472, .hw_value = 13 }, + { .center_freq = 2484, .hw_value = 14 }, +}; + +/* This table contains the hardware specific values for the modulation rates. */ +static const struct ieee80211_rate lbtf_rates[] = { + { .bitrate = 10, + .hw_value = 0, }, + { .bitrate = 20, + .hw_value = 1, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = 2, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = 3, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = 5, + .flags = 0 }, + { .bitrate = 90, + .hw_value = 6, + .flags = 0 }, + { .bitrate = 120, + .hw_value = 7, + .flags = 0 }, + { .bitrate = 180, + .hw_value = 8, + .flags = 0 }, + { .bitrate = 240, + .hw_value = 9, + .flags = 0 }, + { .bitrate = 360, + .hw_value = 10, + .flags = 0 }, + { .bitrate = 480, + .hw_value = 11, + .flags = 0 }, + { .bitrate = 540, + .hw_value = 12, + .flags = 0 }, +}; + +static void lbtf_cmd_work(struct work_struct *work) +{ + struct lbtf_private *priv = container_of(work, struct lbtf_private, + cmd_work); + spin_lock_irq(&priv->driver_lock); + /* command response? */ + if (priv->cmd_response_rxed) { + priv->cmd_response_rxed = 0; + spin_unlock_irq(&priv->driver_lock); + lbtf_process_rx_command(priv); + spin_lock_irq(&priv->driver_lock); + } + + if (priv->cmd_timed_out && priv->cur_cmd) { + struct cmd_ctrl_node *cmdnode = priv->cur_cmd; + + if (++priv->nr_retries > 10) { + lbtf_complete_command(priv, cmdnode, + -ETIMEDOUT); + priv->nr_retries = 0; + } else { + priv->cur_cmd = NULL; + + /* Stick it back at the _top_ of the pending + * queue for immediate resubmission */ + list_add(&cmdnode->list, &priv->cmdpendingq); + } + } + priv->cmd_timed_out = 0; + spin_unlock_irq(&priv->driver_lock); + + if (!priv->fw_ready) + return; + /* Execute the next command */ + if (!priv->cur_cmd) + lbtf_execute_next_command(priv); +} + +/** + * lbtf_setup_firmware: initialize firmware. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success. + */ +static int lbtf_setup_firmware(struct lbtf_private *priv) +{ + int ret = -1; + + /* + * Read priv address from HW + */ + memset(priv->current_addr, 0xff, ETH_ALEN); + ret = lbtf_update_hw_spec(priv); + if (ret) { + ret = -1; + goto done; + } + + lbtf_set_mac_control(priv); + lbtf_set_radio_control(priv); + + ret = 0; +done: + return ret; +} + +/** + * This function handles the timeout of command sending. + * It will re-send the same command again. + */ +static void command_timer_fn(unsigned long data) +{ + struct lbtf_private *priv = (struct lbtf_private *)data; + unsigned long flags; + + spin_lock_irqsave(&priv->driver_lock, flags); + + if (!priv->cur_cmd) { + printk(KERN_DEBUG "libertastf: command timer expired; " + "no pending command\n"); + goto out; + } + + printk(KERN_DEBUG "libertas: command %x timed out\n", + le16_to_cpu(priv->cur_cmd->cmdbuf->command)); + + priv->cmd_timed_out = 1; + queue_work(lbtf_wq, &priv->cmd_work); +out: + spin_unlock_irqrestore(&priv->driver_lock, flags); +} + +static int lbtf_init_adapter(struct lbtf_private *priv) +{ + memset(priv->current_addr, 0xff, ETH_ALEN); + mutex_init(&priv->lock); + + priv->vif = NULL; + setup_timer(&priv->command_timer, command_timer_fn, + (unsigned long)priv); + + INIT_LIST_HEAD(&priv->cmdfreeq); + INIT_LIST_HEAD(&priv->cmdpendingq); + + spin_lock_init(&priv->driver_lock); + + /* Allocate the command buffers */ + if (lbtf_allocate_cmd_buffer(priv)) + return -1; + + return 0; +} + +static void lbtf_free_adapter(struct lbtf_private *priv) +{ + lbtf_free_cmd_buffer(priv); + del_timer(&priv->command_timer); +} + +static int lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct lbtf_private *priv = hw->priv; + + priv->skb_to_tx = skb; + queue_work(lbtf_wq, &priv->tx_work); + /* + * queue will be restarted when we receive transmission feedback if + * there are no buffered multicast frames to send + */ + ieee80211_stop_queues(priv->hw); + return 0; +} + +static void lbtf_tx_work(struct work_struct *work) +{ + struct lbtf_private *priv = container_of(work, struct lbtf_private, + tx_work); + unsigned int len; + struct ieee80211_tx_info *info; + struct txpd *txpd; + struct sk_buff *skb = NULL; + int err; + + if ((priv->vif->type == NL80211_IFTYPE_AP) && + (!skb_queue_empty(&priv->bc_ps_buf))) + skb = skb_dequeue(&priv->bc_ps_buf); + else if (priv->skb_to_tx) { + skb = priv->skb_to_tx; + priv->skb_to_tx = NULL; + } else + return; + + len = skb->len; + info = IEEE80211_SKB_CB(skb); + txpd = (struct txpd *) skb_push(skb, sizeof(struct txpd)); + + if (priv->surpriseremoved) { + dev_kfree_skb_any(skb); + return; + } + + memset(txpd, 0, sizeof(struct txpd)); + /* Activate per-packet rate selection */ + txpd->tx_control |= cpu_to_le32(MRVL_PER_PACKET_RATE | + ieee80211_get_tx_rate(priv->hw, info)->hw_value); + + /* copy destination address from 802.11 header */ + memcpy(txpd->tx_dest_addr_high, skb->data + sizeof(struct txpd) + 4, + ETH_ALEN); + txpd->tx_packet_length = cpu_to_le16(len); + txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); + BUG_ON(priv->tx_skb); + spin_lock_irq(&priv->driver_lock); + priv->tx_skb = skb; + err = priv->hw_host_to_card(priv, MVMS_DAT, skb->data, skb->len); + spin_unlock_irq(&priv->driver_lock); + if (err) { + dev_kfree_skb_any(skb); + priv->tx_skb = NULL; + } +} + +static int lbtf_op_start(struct ieee80211_hw *hw) +{ + struct lbtf_private *priv = hw->priv; + void *card = priv->card; + int ret = -1; + + if (!priv->fw_ready) + /* Upload firmware */ + if (priv->hw_prog_firmware(card)) + goto err_prog_firmware; + + /* poke the firmware */ + priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; + priv->radioon = RADIO_ON; + priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; + ret = lbtf_setup_firmware(priv); + if (ret) + goto err_prog_firmware; + + if ((priv->fwrelease < LBTF_FW_VER_MIN) || + (priv->fwrelease > LBTF_FW_VER_MAX)) { + ret = -1; + goto err_prog_firmware; + } + + printk(KERN_INFO "libertastf: Marvell WLAN 802.11 thinfirm adapter\n"); + return 0; + +err_prog_firmware: + priv->hw_reset_device(card); + return ret; +} + +static void lbtf_op_stop(struct ieee80211_hw *hw) +{ + struct lbtf_private *priv = hw->priv; + unsigned long flags; + struct sk_buff *skb; + + struct cmd_ctrl_node *cmdnode; + /* Flush pending command nodes */ + spin_lock_irqsave(&priv->driver_lock, flags); + list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { + cmdnode->result = -ENOENT; + cmdnode->cmdwaitqwoken = 1; + wake_up_interruptible(&cmdnode->cmdwait_q); + } + + spin_unlock_irqrestore(&priv->driver_lock, flags); + cancel_work_sync(&priv->cmd_work); + cancel_work_sync(&priv->tx_work); + while ((skb = skb_dequeue(&priv->bc_ps_buf))) + dev_kfree_skb_any(skb); + priv->radioon = RADIO_OFF; + lbtf_set_radio_control(priv); + + return; +} + +static int lbtf_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + if (priv->vif != NULL) + return -EOPNOTSUPP; + + priv->vif = conf->vif; + switch (conf->type) { + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_AP: + lbtf_set_mode(priv, LBTF_AP_MODE); + break; + case NL80211_IFTYPE_STATION: + lbtf_set_mode(priv, LBTF_STA_MODE); + break; + default: + priv->vif = NULL; + return -EOPNOTSUPP; + } + lbtf_set_mac_address(priv, (u8 *) conf->mac_addr); + return 0; +} + +static void lbtf_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + + if (priv->vif->type == NL80211_IFTYPE_AP || + priv->vif->type == NL80211_IFTYPE_MESH_POINT) + lbtf_beacon_ctrl(priv, 0, 0); + lbtf_set_mode(priv, LBTF_PASSIVE_MODE); + lbtf_set_bssid(priv, 0, NULL); + priv->vif = NULL; +} + +static int lbtf_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + if (conf->channel->center_freq != priv->cur_freq) { + priv->cur_freq = conf->channel->center_freq; + lbtf_set_channel(priv, conf->channel->hw_value); + } + return 0; +} + +static int lbtf_op_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + struct sk_buff *beacon; + + switch (priv->vif->type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + beacon = ieee80211_beacon_get(hw, vif); + if (beacon) { + lbtf_beacon_set(priv, beacon); + kfree_skb(beacon); + lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int); + } + break; + default: + break; + } + + if (conf->bssid) { + u8 null_bssid[ETH_ALEN] = {0}; + bool activate = compare_ether_addr(conf->bssid, null_bssid); + lbtf_set_bssid(priv, activate, conf->bssid); + } + + return 0; +} + +#define SUPPORTED_FIF_FLAGS (FIF_PROMISC_IN_BSS | FIF_ALLMULTI) +static void lbtf_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + int mc_count, struct dev_mc_list *mclist) +{ + struct lbtf_private *priv = hw->priv; + int old_mac_control = priv->mac_control; + int i; + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + if (!changed_flags) + return; + + if (*new_flags & (FIF_PROMISC_IN_BSS)) + priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE; + else + priv->mac_control &= ~CMD_ACT_MAC_PROMISCUOUS_ENABLE; + if (*new_flags & (FIF_ALLMULTI) || + mc_count > MRVDRV_MAX_MULTICAST_LIST_SIZE) { + priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE; + priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE; + } else if (mc_count) { + priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE; + priv->mac_control &= ~CMD_ACT_MAC_ALL_MULTICAST_ENABLE; + priv->nr_of_multicastmacaddr = mc_count; + for (i = 0; i < mc_count; i++) { + if (!mclist) + break; + memcpy(&priv->multicastlist[i], mclist->da_addr, + ETH_ALEN); + mclist = mclist->next; + } + lbtf_cmd_set_mac_multicast_addr(priv); + } else { + priv->mac_control &= ~(CMD_ACT_MAC_MULTICAST_ENABLE | + CMD_ACT_MAC_ALL_MULTICAST_ENABLE); + if (priv->nr_of_multicastmacaddr) { + priv->nr_of_multicastmacaddr = 0; + lbtf_cmd_set_mac_multicast_addr(priv); + } + } + + + if (priv->mac_control != old_mac_control) + lbtf_set_mac_control(priv); +} + +static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct lbtf_private *priv = hw->priv; + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + if (bss_conf->use_short_preamble) + priv->preamble = CMD_TYPE_SHORT_PREAMBLE; + else + priv->preamble = CMD_TYPE_LONG_PREAMBLE; + lbtf_set_radio_control(priv); + } + + return; +} + +static const struct ieee80211_ops lbtf_ops = { + .tx = lbtf_op_tx, + .start = lbtf_op_start, + .stop = lbtf_op_stop, + .add_interface = lbtf_op_add_interface, + .remove_interface = lbtf_op_remove_interface, + .config = lbtf_op_config, + .config_interface = lbtf_op_config_interface, + .configure_filter = lbtf_op_configure_filter, + .bss_info_changed = lbtf_op_bss_info_changed, +}; + +int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) +{ + struct ieee80211_rx_status stats; + struct rxpd *prxpd; + int need_padding; + unsigned int flags; + struct ieee80211_hdr *hdr; + + prxpd = (struct rxpd *) skb->data; + + stats.flag = 0; + if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) + stats.flag |= RX_FLAG_FAILED_FCS_CRC; + stats.freq = priv->cur_freq; + stats.band = IEEE80211_BAND_2GHZ; + stats.signal = prxpd->snr; + stats.noise = prxpd->nf; + stats.qual = prxpd->snr - prxpd->nf; + /* Marvell rate index has a hole at value 4 */ + if (prxpd->rx_rate > 4) + --prxpd->rx_rate; + stats.rate_idx = prxpd->rx_rate; + skb_pull(skb, sizeof(struct rxpd)); + + hdr = (struct ieee80211_hdr *)skb->data; + flags = le32_to_cpu(*(__le32 *)(skb->data + 4)); + + need_padding = ieee80211_is_data_qos(hdr->frame_control); + need_padding ^= ieee80211_has_a4(hdr->frame_control); + need_padding ^= ieee80211_is_data_qos(hdr->frame_control) && + (*ieee80211_get_qos_ctl(hdr) & + IEEE80211_QOS_CONTROL_A_MSDU_PRESENT); + + if (need_padding) { + memmove(skb->data + 2, skb->data, skb->len); + skb_reserve(skb, 2); + } + + ieee80211_rx_irqsafe(priv->hw, skb, &stats); + return 0; +} +EXPORT_SYMBOL_GPL(lbtf_rx); + +/** + * lbtf_add_card: Add and initialize the card, no fw upload yet. + * + * @card A pointer to card + * + * Returns: pointer to struct lbtf_priv. + */ +struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev) +{ + struct ieee80211_hw *hw; + struct lbtf_private *priv = NULL; + + hw = ieee80211_alloc_hw(sizeof(struct lbtf_private), &lbtf_ops); + if (!hw) + goto done; + + priv = hw->priv; + if (lbtf_init_adapter(priv)) + goto err_init_adapter; + + priv->hw = hw; + priv->card = card; + priv->tx_skb = NULL; + + hw->queues = 1; + hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + hw->extra_tx_headroom = sizeof(struct txpd); + memcpy(priv->channels, lbtf_channels, sizeof(lbtf_channels)); + memcpy(priv->rates, lbtf_rates, sizeof(lbtf_rates)); + priv->band.n_bitrates = ARRAY_SIZE(lbtf_rates); + priv->band.bitrates = priv->rates; + priv->band.n_channels = ARRAY_SIZE(lbtf_channels); + priv->band.channels = priv->channels; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; + skb_queue_head_init(&priv->bc_ps_buf); + + SET_IEEE80211_DEV(hw, dmdev); + + INIT_WORK(&priv->cmd_work, lbtf_cmd_work); + INIT_WORK(&priv->tx_work, lbtf_tx_work); + if (ieee80211_register_hw(hw)) + goto err_init_adapter; + + goto done; + +err_init_adapter: + lbtf_free_adapter(priv); + ieee80211_free_hw(hw); + priv = NULL; + +done: + return priv; +} +EXPORT_SYMBOL_GPL(lbtf_add_card); + + +int lbtf_remove_card(struct lbtf_private *priv) +{ + struct ieee80211_hw *hw = priv->hw; + + priv->surpriseremoved = 1; + del_timer(&priv->command_timer); + lbtf_free_adapter(priv); + priv->hw = NULL; + ieee80211_unregister_hw(hw); + ieee80211_free_hw(hw); + + return 0; +} +EXPORT_SYMBOL_GPL(lbtf_remove_card); + +void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); + memset(&info->status, 0, sizeof(info->status)); + /* + * Commented out, otherwise we never go beyond 1Mbit/s using mac80211 + * default pid rc algorithm. + * + * info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt; + */ + info->status.excessive_retries = fail ? 1 : 0; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail) + info->flags |= IEEE80211_TX_STAT_ACK; + skb_pull(priv->tx_skb, sizeof(struct txpd)); + ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); + priv->tx_skb = NULL; + if (!priv->skb_to_tx && skb_queue_empty(&priv->bc_ps_buf)) + ieee80211_wake_queues(priv->hw); + else + queue_work(lbtf_wq, &priv->tx_work); +} +EXPORT_SYMBOL_GPL(lbtf_send_tx_feedback); + +void lbtf_bcn_sent(struct lbtf_private *priv) +{ + struct sk_buff *skb = NULL; + + if (priv->vif->type != NL80211_IFTYPE_AP) + return; + + if (skb_queue_empty(&priv->bc_ps_buf)) { + bool tx_buff_bc = 0; + + while ((skb = ieee80211_get_buffered_bc(priv->hw, priv->vif))) { + skb_queue_tail(&priv->bc_ps_buf, skb); + tx_buff_bc = 1; + } + if (tx_buff_bc) { + ieee80211_stop_queues(priv->hw); + queue_work(lbtf_wq, &priv->tx_work); + } + } + + skb = ieee80211_beacon_get(priv->hw, priv->vif); + + if (skb) { + lbtf_beacon_set(priv, skb); + kfree_skb(skb); + } +} +EXPORT_SYMBOL_GPL(lbtf_bcn_sent); + +static int __init lbtf_init_module(void) +{ + lbtf_wq = create_workqueue("libertastf"); + if (lbtf_wq == NULL) { + printk(KERN_ERR "libertastf: couldn't create workqueue\n"); + return -ENOMEM; + } + return 0; +} + +static void __exit lbtf_exit_module(void) +{ + destroy_workqueue(lbtf_wq); +} + +module_init(lbtf_init_module); +module_exit(lbtf_exit_module); + +MODULE_DESCRIPTION("Libertas WLAN Thinfirm Driver Library"); +MODULE_AUTHOR("Cozybit Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 248d31a7aa3..c9e4a435b2f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -14,6 +14,8 @@ * - RX filtering based on filter configuration (data->rx_filter) */ +#include <linux/list.h> +#include <linux/spinlock.h> #include <net/mac80211.h> #include <net/ieee80211_radiotap.h> #include <linux/if_arp.h> @@ -28,11 +30,56 @@ static int radios = 2; module_param(radios, int, 0444); MODULE_PARM_DESC(radios, "Number of simulated radios"); +struct hwsim_vif_priv { + u32 magic; +}; + +#define HWSIM_VIF_MAGIC 0x69537748 + +static inline void hwsim_check_magic(struct ieee80211_vif *vif) +{ + struct hwsim_vif_priv *vp = (void *)vif->drv_priv; + WARN_ON(vp->magic != HWSIM_VIF_MAGIC); +} + +static inline void hwsim_set_magic(struct ieee80211_vif *vif) +{ + struct hwsim_vif_priv *vp = (void *)vif->drv_priv; + vp->magic = HWSIM_VIF_MAGIC; +} + +static inline void hwsim_clear_magic(struct ieee80211_vif *vif) +{ + struct hwsim_vif_priv *vp = (void *)vif->drv_priv; + vp->magic = 0; +} + +struct hwsim_sta_priv { + u32 magic; +}; + +#define HWSIM_STA_MAGIC 0x6d537748 + +static inline void hwsim_check_sta_magic(struct ieee80211_sta *sta) +{ + struct hwsim_sta_priv *sp = (void *)sta->drv_priv; + WARN_ON(sp->magic != HWSIM_VIF_MAGIC); +} + +static inline void hwsim_set_sta_magic(struct ieee80211_sta *sta) +{ + struct hwsim_sta_priv *sp = (void *)sta->drv_priv; + sp->magic = HWSIM_VIF_MAGIC; +} + +static inline void hwsim_clear_sta_magic(struct ieee80211_sta *sta) +{ + struct hwsim_sta_priv *sp = (void *)sta->drv_priv; + sp->magic = 0; +} static struct class *hwsim_class; -static struct ieee80211_hw **hwsim_radios; -static int hwsim_radio_count; static struct net_device *hwsim_mon; /* global monitor netdev */ @@ -68,7 +115,12 @@ static const struct ieee80211_rate hwsim_rates[] = { { .bitrate = 540 } }; +static spinlock_t hwsim_radio_lock; +static struct list_head hwsim_radios; + struct mac80211_hwsim_data { + struct list_head list; + struct ieee80211_hw *hw; struct device *dev; struct ieee80211_supported_band band; struct ieee80211_channel channels[ARRAY_SIZE(hwsim_channels)]; @@ -144,11 +196,11 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw, } -static int mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, - struct sk_buff *skb) +static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, + struct sk_buff *skb) { - struct mac80211_hwsim_data *data = hw->priv; - int i, ack = 0; + struct mac80211_hwsim_data *data = hw->priv, *data2; + bool ack = false; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rx_status rx_status; @@ -161,13 +213,13 @@ static int mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, /* TODO: simulate signal strength (and optional packet drop) */ /* Copy skb to all enabled radios that are on the current frequency */ - for (i = 0; i < hwsim_radio_count; i++) { - struct mac80211_hwsim_data *data2; + spin_lock(&hwsim_radio_lock); + list_for_each_entry(data2, &hwsim_radios, list) { struct sk_buff *nskb; - if (hwsim_radios[i] == NULL || hwsim_radios[i] == hw) + if (data == data2) continue; - data2 = hwsim_radios[i]->priv; + if (!data2->started || !data2->radio_enabled || data->channel->center_freq != data2->channel->center_freq) continue; @@ -176,11 +228,12 @@ static int mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, if (nskb == NULL) continue; - if (memcmp(hdr->addr1, hwsim_radios[i]->wiphy->perm_addr, + if (memcmp(hdr->addr1, data2->hw->wiphy->perm_addr, ETH_ALEN) == 0) - ack = 1; - ieee80211_rx_irqsafe(hwsim_radios[i], nskb, &rx_status); + ack = true; + ieee80211_rx_irqsafe(data2->hw, nskb, &rx_status); } + spin_unlock(&hwsim_radio_lock); return ack; } @@ -189,7 +242,7 @@ static int mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct mac80211_hwsim_data *data = hw->priv; - int ack; + bool ack; struct ieee80211_tx_info *txi; mac80211_hwsim_monitor_rx(hw, skb); @@ -210,6 +263,12 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ack = mac80211_hwsim_tx_frame(hw, skb); txi = IEEE80211_SKB_CB(skb); + + if (txi->control.vif) + hwsim_check_magic(txi->control.vif); + if (txi->control.sta) + hwsim_check_sta_magic(txi->control.sta); + memset(&txi->status, 0, sizeof(txi->status)); if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { if (ack) @@ -246,6 +305,7 @@ static int mac80211_hwsim_add_interface(struct ieee80211_hw *hw, printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%s)\n", wiphy_name(hw->wiphy), __func__, conf->type, print_mac(mac, conf->mac_addr)); + hwsim_set_magic(conf->vif); return 0; } @@ -257,6 +317,8 @@ static void mac80211_hwsim_remove_interface( printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%s)\n", wiphy_name(hw->wiphy), __func__, conf->type, print_mac(mac, conf->mac_addr)); + hwsim_check_magic(conf->vif); + hwsim_clear_magic(conf->vif); } @@ -267,7 +329,9 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, struct sk_buff *skb; struct ieee80211_tx_info *info; - if (vif->type != IEEE80211_IF_TYPE_AP) + hwsim_check_magic(vif); + + if (vif->type != NL80211_IFTYPE_AP) return; skb = ieee80211_beacon_get(hw, vif); @@ -341,7 +405,45 @@ static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw, *total_flags = data->rx_filter; } +static int mac80211_hwsim_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + hwsim_check_magic(vif); + return 0; +} + +static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed) +{ + hwsim_check_magic(vif); +} + +static void mac80211_hwsim_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + struct ieee80211_sta *sta) +{ + hwsim_check_magic(vif); + switch (cmd) { + case STA_NOTIFY_ADD: + hwsim_set_sta_magic(sta); + break; + case STA_NOTIFY_REMOVE: + hwsim_clear_sta_magic(sta); + break; + } +} +static int mac80211_hwsim_set_tim(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + bool set) +{ + hwsim_check_sta_magic(sta); + return 0; +} static const struct ieee80211_ops mac80211_hwsim_ops = { @@ -352,23 +454,30 @@ static const struct ieee80211_ops mac80211_hwsim_ops = .remove_interface = mac80211_hwsim_remove_interface, .config = mac80211_hwsim_config, .configure_filter = mac80211_hwsim_configure_filter, + .config_interface = mac80211_hwsim_config_interface, + .bss_info_changed = mac80211_hwsim_bss_info_changed, + .sta_notify = mac80211_hwsim_sta_notify, + .set_tim = mac80211_hwsim_set_tim, }; static void mac80211_hwsim_free(void) { - int i; - - for (i = 0; i < hwsim_radio_count; i++) { - if (hwsim_radios[i]) { - struct mac80211_hwsim_data *data; - data = hwsim_radios[i]->priv; - ieee80211_unregister_hw(hwsim_radios[i]); - device_unregister(data->dev); - ieee80211_free_hw(hwsim_radios[i]); - } + struct list_head tmplist, *i, *tmp; + struct mac80211_hwsim_data *data; + + INIT_LIST_HEAD(&tmplist); + + spin_lock_bh(&hwsim_radio_lock); + list_for_each_safe(i, tmp, &hwsim_radios) + list_move(i, &tmplist); + spin_unlock_bh(&hwsim_radio_lock); + + list_for_each_entry(data, &tmplist, list) { + ieee80211_unregister_hw(data->hw); + device_unregister(data->dev); + ieee80211_free_hw(data->hw); } - kfree(hwsim_radios); class_destroy(hwsim_class); } @@ -398,37 +507,32 @@ static int __init init_mac80211_hwsim(void) struct ieee80211_hw *hw; DECLARE_MAC_BUF(mac); - if (radios < 1 || radios > 65535) + if (radios < 1 || radios > 100) return -EINVAL; - hwsim_radio_count = radios; - hwsim_radios = kcalloc(hwsim_radio_count, - sizeof(struct ieee80211_hw *), GFP_KERNEL); - if (hwsim_radios == NULL) - return -ENOMEM; + spin_lock_init(&hwsim_radio_lock); + INIT_LIST_HEAD(&hwsim_radios); hwsim_class = class_create(THIS_MODULE, "mac80211_hwsim"); - if (IS_ERR(hwsim_class)) { - kfree(hwsim_radios); + if (IS_ERR(hwsim_class)) return PTR_ERR(hwsim_class); - } memset(addr, 0, ETH_ALEN); addr[0] = 0x02; - for (i = 0; i < hwsim_radio_count; i++) { + for (i = 0; i < radios; i++) { printk(KERN_DEBUG "mac80211_hwsim: Initializing radio %d\n", i); hw = ieee80211_alloc_hw(sizeof(*data), &mac80211_hwsim_ops); - if (hw == NULL) { + if (!hw) { printk(KERN_DEBUG "mac80211_hwsim: ieee80211_alloc_hw " "failed\n"); err = -ENOMEM; goto failed; } - hwsim_radios[i] = hw; - data = hw->priv; + data->hw = hw; + data->dev = device_create_drvdata(hwsim_class, NULL, 0, hw, "hwsim%d", i); if (IS_ERR(data->dev)) { @@ -446,7 +550,15 @@ static int __init init_mac80211_hwsim(void) SET_IEEE80211_PERM_ADDR(hw, addr); hw->channel_change_time = 1; - hw->queues = 1; + hw->queues = 4; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP); + hw->ampdu_queues = 1; + + /* ask mac80211 to reserve space for magic */ + hw->vif_data_size = sizeof(struct hwsim_vif_priv); + hw->sta_data_size = sizeof(struct hwsim_sta_priv); memcpy(data->channels, hwsim_channels, sizeof(hwsim_channels)); memcpy(data->rates, hwsim_rates, sizeof(hwsim_rates)); @@ -454,6 +566,19 @@ static int __init init_mac80211_hwsim(void) data->band.n_channels = ARRAY_SIZE(hwsim_channels); data->band.bitrates = data->rates; data->band.n_bitrates = ARRAY_SIZE(hwsim_rates); + data->band.ht_info.ht_supported = 1; + data->band.ht_info.cap = IEEE80211_HT_CAP_SUP_WIDTH | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40; + data->band.ht_info.ampdu_factor = 0x3; + data->band.ht_info.ampdu_density = 0x6; + memset(data->band.ht_info.supp_mcs_set, 0, + sizeof(data->band.ht_info.supp_mcs_set)); + data->band.ht_info.supp_mcs_set[0] = 0xff; + data->band.ht_info.supp_mcs_set[1] = 0xff; + data->band.ht_info.supp_mcs_set[12] = + IEEE80211_HT_CAP_MCS_TX_DEFINED; hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &data->band; err = ieee80211_register_hw(hw); @@ -469,6 +594,8 @@ static int __init init_mac80211_hwsim(void) setup_timer(&data->beacon_timer, mac80211_hwsim_beacon, (unsigned long) hw); + + list_add_tail(&data->list, &hwsim_radios); } hwsim_mon = alloc_netdev(0, "hwsim%d", hwsim_mon_setup); @@ -500,7 +627,6 @@ failed_hw: device_unregister(data->dev); failed_drvdata: ieee80211_free_hw(hw); - hwsim_radios[i] = NULL; failed: mac80211_hwsim_free(); return err; @@ -509,8 +635,7 @@ failed: static void __exit exit_mac80211_hwsim(void) { - printk(KERN_DEBUG "mac80211_hwsim: unregister %d radios\n", - hwsim_radio_count); + printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n"); unregister_netdev(hwsim_mon); mac80211_hwsim_free(); diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index f479c1af678..25bae7933aa 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -398,7 +398,7 @@ static int netwave_probe(struct pcmcia_device *link) link->io.IOAddrLines = 5; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = &netwave_interrupt; diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 36c004e1560..50904771f29 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -79,15 +79,21 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/ethtool.h> +#include <linux/firmware.h> #include <linux/if_arp.h> #include <linux/wireless.h> #include <net/iw_handler.h> #include <net/ieee80211.h> +#include <linux/scatterlist.h> +#include <linux/crypto.h> + #include "hermes_rid.h" +#include "hermes_dld.h" #include "orinoco.h" /********************************************************************/ @@ -241,6 +247,74 @@ static int __orinoco_program_rids(struct net_device *dev); static void __orinoco_set_multicast_list(struct net_device *dev); /********************************************************************/ +/* Michael MIC crypto setup */ +/********************************************************************/ +#define MICHAEL_MIC_LEN 8 +static int orinoco_mic_init(struct orinoco_private *priv) +{ + priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->tx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->tx_tfm_mic = NULL; + return -ENOMEM; + } + + priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->rx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->rx_tfm_mic = NULL; + return -ENOMEM; + } + + return 0; +} + +static void orinoco_mic_free(struct orinoco_private *priv) +{ + if (priv->tx_tfm_mic) + crypto_free_hash(priv->tx_tfm_mic); + if (priv->rx_tfm_mic) + crypto_free_hash(priv->rx_tfm_mic); +} + +static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic) +{ + struct hash_desc desc; + struct scatterlist sg[2]; + u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ + + if (tfm_michael == NULL) { + printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n"); + return -1; + } + + /* Copy header into buffer. We need the padding on the end zeroed */ + memcpy(&hdr[0], da, ETH_ALEN); + memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); + hdr[ETH_ALEN*2] = priority; + hdr[ETH_ALEN*2+1] = 0; + hdr[ETH_ALEN*2+2] = 0; + hdr[ETH_ALEN*2+3] = 0; + + /* Use scatter gather to MIC header and data in one go */ + sg_init_table(sg, 2); + sg_set_buf(&sg[0], hdr, sizeof(hdr)); + sg_set_buf(&sg[1], data, data_len); + + if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) + return -1; + + desc.tfm = tfm_michael; + desc.flags = 0; + return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), + mic); +} + +/********************************************************************/ /* Internal helper functions */ /********************************************************************/ @@ -273,12 +347,19 @@ static inline void set_port_type(struct orinoco_private *priv) #define ORINOCO_MAX_BSS_COUNT 64 static int orinoco_bss_data_allocate(struct orinoco_private *priv) { - if (priv->bss_data) + if (priv->bss_xbss_data) return 0; - priv->bss_data = - kzalloc(ORINOCO_MAX_BSS_COUNT * sizeof(bss_element), GFP_KERNEL); - if (!priv->bss_data) { + if (priv->has_ext_scan) + priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * + sizeof(struct xbss_element), + GFP_KERNEL); + else + priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * + sizeof(struct bss_element), + GFP_KERNEL); + + if (!priv->bss_xbss_data) { printk(KERN_WARNING "Out of memory allocating beacons"); return -ENOMEM; } @@ -287,18 +368,319 @@ static int orinoco_bss_data_allocate(struct orinoco_private *priv) static void orinoco_bss_data_free(struct orinoco_private *priv) { - kfree(priv->bss_data); - priv->bss_data = NULL; + kfree(priv->bss_xbss_data); + priv->bss_xbss_data = NULL; } +#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data) +#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data) static void orinoco_bss_data_init(struct orinoco_private *priv) { int i; INIT_LIST_HEAD(&priv->bss_free_list); INIT_LIST_HEAD(&priv->bss_list); - for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) - list_add_tail(&priv->bss_data[i].list, &priv->bss_free_list); + if (priv->has_ext_scan) + for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) + list_add_tail(&(PRIV_XBSS[i].list), + &priv->bss_free_list); + else + for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) + list_add_tail(&(PRIV_BSS[i].list), + &priv->bss_free_list); + +} + +static inline u8 *orinoco_get_ie(u8 *data, size_t len, + enum ieee80211_mfie eid) +{ + u8 *p = data; + while ((p + 2) < (data + len)) { + if (p[0] == eid) + return p; + p += p[1] + 2; + } + return NULL; +} + +#define WPA_OUI_TYPE "\x00\x50\xF2\x01" +#define WPA_SELECTOR_LEN 4 +static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) +{ + u8 *p = data; + while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { + if ((p[0] == MFIE_TYPE_GENERIC) && + (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) + return p; + p += p[1] + 2; + } + return NULL; +} + + +/********************************************************************/ +/* Download functionality */ +/********************************************************************/ + +struct fw_info { + char *pri_fw; + char *sta_fw; + char *ap_fw; + u32 pda_addr; + u16 pda_size; +}; + +const static struct fw_info orinoco_fw[] = { + { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, + { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, + { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 0x100 } +}; + +/* Structure used to access fields in FW + * Make sure LE decoding macros are used + */ +struct orinoco_fw_header { + char hdr_vers[6]; /* ASCII string for header version */ + __le16 headersize; /* Total length of header */ + __le32 entry_point; /* NIC entry point */ + __le32 blocks; /* Number of blocks to program */ + __le32 block_offset; /* Offset of block data from eof header */ + __le32 pdr_offset; /* Offset to PDR data from eof header */ + __le32 pri_offset; /* Offset to primary plug data */ + __le32 compat_offset; /* Offset to compatibility data*/ + char signature[0]; /* FW signature length headersize-20 */ +} __attribute__ ((packed)); + +/* Download either STA or AP firmware into the card. */ +static int +orinoco_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw, + int ap) +{ + /* Plug Data Area (PDA) */ + __le16 pda[512] = { 0 }; + + hermes_t *hw = &priv->hw; + const struct firmware *fw_entry; + const struct orinoco_fw_header *hdr; + const unsigned char *first_block; + const unsigned char *end; + const char *firmware; + struct net_device *dev = priv->ndev; + int err; + + if (ap) + firmware = fw->ap_fw; + else + firmware = fw->sta_fw; + + printk(KERN_DEBUG "%s: Attempting to download firmware %s\n", + dev->name, firmware); + + /* Read current plug data */ + err = hermes_read_pda(hw, pda, fw->pda_addr, + min_t(u16, fw->pda_size, sizeof(pda)), 0); + printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err); + if (err) + return err; + + err = request_firmware(&fw_entry, firmware, priv->dev); + if (err) { + printk(KERN_ERR "%s: Cannot find firmware %s\n", + dev->name, firmware); + return -ENOENT; + } + + hdr = (const struct orinoco_fw_header *) fw_entry->data; + + /* Enable aux port to allow programming */ + err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point)); + printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Program data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->block_offset)); + end = fw_entry->data + fw_entry->size; + + err = hermes_program(hw, first_block, end); + printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Update production data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->pdr_offset)); + + err = hermes_apply_pda_with_defaults(hw, first_block, pda); + printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err); + if (err) + goto abort; + + /* Tell card we've finished */ + err = hermesi_program_end(hw); + printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Check if we're running */ + printk(KERN_DEBUG "%s: hermes_present returned %d\n", + dev->name, hermes_present(hw)); + +abort: + release_firmware(fw_entry); + return err; +} + +/* End markers */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * Process a firmware image - stop the card, load the firmware, reset + * the card and make sure it responds. For the secondary firmware take + * care of the PDA - read it and then write it on top of the firmware. + */ +static int +symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, + const unsigned char *image, const unsigned char *end, + int secondary) +{ + hermes_t *hw = &priv->hw; + int ret; + const unsigned char *ptr; + const unsigned char *first_block; + + /* Plug Data Area (PDA) */ + __le16 pda[256]; + + /* Binary block begins after the 0x1A marker */ + ptr = image; + while (*ptr++ != TEXT_END); + first_block = ptr; + + /* Read the PDA from EEPROM */ + if (secondary) { + ret = hermes_read_pda(hw, pda, fw->pda_addr, sizeof(pda), 1); + if (ret) + return ret; + } + + /* Stop the firmware, so that it can be safely rewritten */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 1); + if (ret) + return ret; + } + + /* Program the adapter with new firmware */ + ret = hermes_program(hw, first_block, end); + if (ret) + return ret; + + /* Write the PDA to the adapter */ + if (secondary) { + size_t len = hermes_blocks_length(first_block); + ptr = first_block + len; + ret = hermes_apply_pda(hw, ptr, pda); + if (ret) + return ret; + } + + /* Run the firmware */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 0); + if (ret) + return ret; + } + + /* Reset hermes chip and make sure it responds */ + ret = hermes_init(hw); + + /* hermes_reset() should return 0 with the secondary firmware */ + if (secondary && ret != 0) + return -ENODEV; + + /* And this should work with any firmware */ + if (!hermes_present(hw)) + return -ENODEV; + + return 0; +} + + +/* + * Download the firmware into the card, this also does a PCMCIA soft + * reset on the card, to make sure it's in a sane state. + */ +static int +symbol_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw) +{ + struct net_device *dev = priv->ndev; + int ret; + const struct firmware *fw_entry; + + if (request_firmware(&fw_entry, fw->pri_fw, + priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->pri_fw); + return -ENOENT; + } + + /* Load primary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 0); + release_firmware(fw_entry); + if (ret) { + printk(KERN_ERR "%s: Primary firmware download failed\n", + dev->name); + return ret; + } + + if (request_firmware(&fw_entry, fw->sta_fw, + priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->sta_fw); + return -ENOENT; + } + + /* Load secondary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 1); + release_firmware(fw_entry); + if (ret) { + printk(KERN_ERR "%s: Secondary firmware download failed\n", + dev->name); + } + + return ret; +} + +static int orinoco_download(struct orinoco_private *priv) +{ + int err = 0; + /* Reload firmware */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* case FIRMWARE_TYPE_INTERSIL: */ + err = orinoco_dl_firmware(priv, + &orinoco_fw[priv->firmware_type], 0); + break; + + case FIRMWARE_TYPE_SYMBOL: + err = symbol_dl_firmware(priv, + &orinoco_fw[priv->firmware_type]); + break; + case FIRMWARE_TYPE_INTERSIL: + break; + } + /* TODO: if we fail we probably need to reinitialise + * the driver */ + + return err; } /********************************************************************/ @@ -453,8 +835,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) int err = 0; u16 txfid = priv->txfid; struct ethhdr *eh; - int data_off; - struct hermes_tx_descriptor desc; + int tx_control; unsigned long flags; if (! netif_running(dev)) { @@ -486,23 +867,54 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) if (skb->len < ETH_HLEN) goto drop; - eh = (struct ethhdr *)skb->data; + tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; - memset(&desc, 0, sizeof(desc)); - desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx descriptor " - "to BAP\n", dev->name, err); - goto busy; + if (priv->encode_alg == IW_ENCODE_ALG_TKIP) + tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | + HERMES_TXCTRL_MIC; + + if (priv->has_alt_txcntl) { + /* WPA enabled firmwares have tx_cntl at the end of + * the 802.11 header. So write zeroed descriptor and + * 802.11 header at the same time + */ + char desc[HERMES_802_3_OFFSET]; + __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; + + memset(&desc, 0, sizeof(desc)); + + *txcntl = cpu_to_le16(tx_control); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + } else { + struct hermes_tx_descriptor desc; + + memset(&desc, 0, sizeof(desc)); + + desc.tx_control = cpu_to_le16(tx_control); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); } - /* Clear the 802.11 header and data length fields - some - * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused - * if this isn't done. */ - hermes_clear_words(hw, HERMES_DATA0, - HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + eh = (struct ethhdr *)skb->data; /* Encapsulate Ethernet-II frames */ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ @@ -513,33 +925,65 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) /* Strip destination and source from the data */ skb_pull(skb, 2 * ETH_ALEN); - data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr); /* And move them to a separate header */ memcpy(&hdr.eth, eh, 2 * ETH_ALEN); hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); - err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), - txfid, HERMES_802_3_OFFSET); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing packet " - "header to BAP\n", dev->name, err); - goto busy; + /* Insert the SNAP header */ + if (skb_headroom(skb) < sizeof(hdr)) { + printk(KERN_ERR + "%s: Not enough headroom for 802.2 headers %d\n", + dev->name, skb_headroom(skb)); + goto drop; } - } else { /* IEEE 802.3 frame */ - data_off = HERMES_802_3_OFFSET; + eh = (struct ethhdr *) skb_push(skb, sizeof(hdr)); + memcpy(eh, &hdr, sizeof(hdr)); } err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, - txfid, data_off); + txfid, HERMES_802_3_OFFSET); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", dev->name, err); goto busy; } + /* Calculate Michael MIC */ + if (priv->encode_alg == IW_ENCODE_ALG_TKIP) { + u8 mic_buf[MICHAEL_MIC_LEN + 1]; + u8 *mic; + size_t offset; + size_t len; + + if (skb->len % 2) { + /* MIC start is on an odd boundary */ + mic_buf[0] = skb->data[skb->len - 1]; + mic = &mic_buf[1]; + offset = skb->len - 1; + len = MICHAEL_MIC_LEN + 1; + } else { + mic = &mic_buf[0]; + offset = skb->len; + len = MICHAEL_MIC_LEN; + } + + michael_mic(priv->tx_tfm_mic, + priv->tkip_key[priv->tx_key].tx_mic, + eh->h_dest, eh->h_source, 0 /* priority */, + skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); + + /* Write the MIC */ + err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, + txfid, HERMES_802_3_OFFSET + offset); + if (err) { + printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", + dev->name, err); + goto busy; + } + } + /* Finally, we actually initiate the send */ netif_stop_queue(dev); @@ -554,7 +998,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) } dev->trans_start = jiffies; - stats->tx_bytes += data_off + skb->len; + stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; goto ok; drop: @@ -834,21 +1278,48 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, stats->rx_dropped++; } +/* Get tsc from the firmware */ +static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, + u8 *tsc) +{ + hermes_t *hw = &priv->hw; + int err = 0; + u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; + + if ((key < 0) || (key > 4)) + return -EINVAL; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, + sizeof(tsc_arr), NULL, &tsc_arr); + if (!err) + memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); + + return err; +} + static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; struct iw_statistics *wstats = &priv->wstats; struct sk_buff *skb = NULL; - u16 rxfid, status, fc; + u16 rxfid, status; int length; - struct hermes_rx_descriptor desc; - struct ethhdr *hdr; + struct hermes_rx_descriptor *desc; + struct orinoco_rx_data *rx_data; int err; + desc = kmalloc(sizeof(*desc), GFP_ATOMIC); + if (!desc) { + printk(KERN_WARNING + "%s: Can't allocate space for RX descriptor\n", + dev->name); + goto update_stats; + } + rxfid = hermes_read_regn(hw, RXFID); - err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), + err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), rxfid, 0); if (err) { printk(KERN_ERR "%s: error %d reading Rx descriptor. " @@ -856,7 +1327,7 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto update_stats; } - status = le16_to_cpu(desc.status); + status = le16_to_cpu(desc->status); if (status & HERMES_RXSTAT_BADCRC) { DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", @@ -867,8 +1338,8 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) /* Handle frames in monitor mode */ if (priv->iw_mode == IW_MODE_MONITOR) { - orinoco_rx_monitor(dev, rxfid, &desc); - return; + orinoco_rx_monitor(dev, rxfid, desc); + goto out; } if (status & HERMES_RXSTAT_UNDECRYPTABLE) { @@ -878,15 +1349,14 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto update_stats; } - length = le16_to_cpu(desc.data_len); - fc = le16_to_cpu(desc.frame_ctl); + length = le16_to_cpu(desc->data_len); /* Sanity checks */ if (length < 3) { /* No for even an 802.2 LLC header */ /* At least on Symbol firmware with PCF we get quite a lot of these legitimately - Poll frames with no data. */ - return; + goto out; } if (length > IEEE80211_DATA_LEN) { printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", @@ -895,6 +1365,11 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto update_stats; } + /* Payload size does not include Michael MIC. Increase payload + * size to read it together with the data. */ + if (status & HERMES_RXSTAT_MIC) + length += MICHAEL_MIC_LEN; + /* We need space for the packet data itself, plus an ethernet header, plus 2 bytes so we can align the IP header on a 32bit boundary, plus 1 byte so we can read in odd length @@ -921,6 +1396,100 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto drop; } + /* Add desc and skb to rx queue */ + rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); + if (!rx_data) { + printk(KERN_WARNING "%s: Can't allocate RX packet\n", + dev->name); + goto drop; + } + rx_data->desc = desc; + rx_data->skb = skb; + list_add_tail(&rx_data->list, &priv->rx_list); + tasklet_schedule(&priv->rx_tasklet); + + return; + +drop: + dev_kfree_skb_irq(skb); +update_stats: + stats->rx_errors++; + stats->rx_dropped++; +out: + kfree(desc); +} + +static void orinoco_rx(struct net_device *dev, + struct hermes_rx_descriptor *desc, + struct sk_buff *skb) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 status, fc; + int length; + struct ethhdr *hdr; + + status = le16_to_cpu(desc->status); + length = le16_to_cpu(desc->data_len); + fc = le16_to_cpu(desc->frame_ctl); + + /* Calculate and check MIC */ + if (status & HERMES_RXSTAT_MIC) { + int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> + HERMES_MIC_KEY_ID_SHIFT); + u8 mic[MICHAEL_MIC_LEN]; + u8 *rxmic; + u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? + desc->addr3 : desc->addr2; + + /* Extract Michael MIC from payload */ + rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; + + skb_trim(skb, skb->len - MICHAEL_MIC_LEN); + length -= MICHAEL_MIC_LEN; + + michael_mic(priv->rx_tfm_mic, + priv->tkip_key[key_id].rx_mic, + desc->addr1, + src, + 0, /* priority or QoS? */ + skb->data, + skb->len, + &mic[0]); + + if (memcmp(mic, rxmic, + MICHAEL_MIC_LEN)) { + union iwreq_data wrqu; + struct iw_michaelmicfailure wxmic; + DECLARE_MAC_BUF(mac); + + printk(KERN_WARNING "%s: " + "Invalid Michael MIC in data frame from %s, " + "using key %i\n", + dev->name, print_mac(mac, src), key_id); + + /* TODO: update stats */ + + /* Notify userspace */ + memset(&wxmic, 0, sizeof(wxmic)); + wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; + wxmic.flags |= (desc->addr1[0] & 1) ? + IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; + wxmic.src_addr.sa_family = ARPHRD_ETHER; + memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); + + (void) orinoco_hw_get_tkip_iv(priv, key_id, + &wxmic.tsc[0]); + + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = sizeof(wxmic); + wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, + (char *) &wxmic); + + goto drop; + } + } + /* Handle decapsulation * In most cases, the firmware tell us about SNAP frames. * For some reason, the SNAP frames sent by LinkSys APs @@ -939,11 +1508,11 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); hdr->h_proto = htons(length); } - memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); + memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); if (fc & IEEE80211_FCTL_FROMDS) - memcpy(hdr->h_source, desc.addr3, ETH_ALEN); + memcpy(hdr->h_source, desc->addr3, ETH_ALEN); else - memcpy(hdr->h_source, desc.addr2, ETH_ALEN); + memcpy(hdr->h_source, desc->addr2, ETH_ALEN); dev->last_rx = jiffies; skb->protocol = eth_type_trans(skb, dev); @@ -952,7 +1521,7 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) skb->pkt_type = PACKET_OTHERHOST; /* Process the wireless stats if needed */ - orinoco_stat_gather(dev, skb, &desc); + orinoco_stat_gather(dev, skb, desc); /* Pass the packet to the networking stack */ netif_rx(skb); @@ -961,13 +1530,33 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) return; - drop: - dev_kfree_skb_irq(skb); - update_stats: + drop: + dev_kfree_skb(skb); stats->rx_errors++; stats->rx_dropped++; } +static void orinoco_rx_isr_tasklet(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_rx_data *rx_data, *temp; + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + + /* extract desc and skb from queue */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + desc = rx_data->desc; + skb = rx_data->skb; + list_del(&rx_data->list); + kfree(rx_data); + + orinoco_rx(dev, desc, skb); + + kfree(desc); + } +} + /********************************************************************/ /* Rx path (info frames) */ /********************************************************************/ @@ -1087,52 +1676,172 @@ static void orinoco_join_ap(struct work_struct *work) } /* Send new BSSID to userspace */ -static void orinoco_send_wevents(struct work_struct *work) +static void orinoco_send_bssid_wevent(struct orinoco_private *priv) { - struct orinoco_private *priv = - container_of(work, struct orinoco_private, wevent_work); struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; union iwreq_data wrqu; int err; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return; err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, ETH_ALEN, NULL, wrqu.ap_addr.sa_data); if (err != 0) - goto out; + return; wrqu.ap_addr.sa_family = ARPHRD_ETHER; /* Send event to user space */ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); +} - out: - orinoco_unlock(priv, &flags); +static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); + } } +static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); + } +} + +static void orinoco_send_wevents(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, wevent_work); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + orinoco_send_assocreqie_wevent(priv); + orinoco_send_assocrespie_wevent(priv); + orinoco_send_bssid_wevent(priv); + + orinoco_unlock(priv, &flags); +} static inline void orinoco_clear_scan_results(struct orinoco_private *priv, unsigned long scan_age) { - bss_element *bss; - bss_element *tmp_bss; - - /* Blow away current list of scan results */ - list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { - if (!scan_age || - time_after(jiffies, bss->last_scanned + scan_age)) { - list_move_tail(&bss->list, &priv->bss_free_list); - /* Don't blow away ->list, just BSS data */ - memset(bss, 0, sizeof(bss->bss)); - bss->last_scanned = 0; + if (priv->has_ext_scan) { + struct xbss_element *bss; + struct xbss_element *tmp_bss; + + /* Blow away current list of scan results */ + list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { + if (!scan_age || + time_after(jiffies, bss->last_scanned + scan_age)) { + list_move_tail(&bss->list, + &priv->bss_free_list); + /* Don't blow away ->list, just BSS data */ + memset(&bss->bss, 0, sizeof(bss->bss)); + bss->last_scanned = 0; + } + } + } else { + struct bss_element *bss; + struct bss_element *tmp_bss; + + /* Blow away current list of scan results */ + list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { + if (!scan_age || + time_after(jiffies, bss->last_scanned + scan_age)) { + list_move_tail(&bss->list, + &priv->bss_free_list); + /* Don't blow away ->list, just BSS data */ + memset(&bss->bss, 0, sizeof(bss->bss)); + bss->last_scanned = 0; + } } } } +static void orinoco_add_ext_scan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *atom) +{ + struct xbss_element *bss = NULL; + int found = 0; + + /* Try to update an existing bss first */ + list_for_each_entry(bss, &priv->bss_list, list) { + if (compare_ether_addr(bss->bss.bssid, atom->bssid)) + continue; + /* ESSID lengths */ + if (bss->bss.data[1] != atom->data[1]) + continue; + if (memcmp(&bss->bss.data[2], &atom->data[2], + atom->data[1])) + continue; + found = 1; + break; + } + + /* Grab a bss off the free list */ + if (!found && !list_empty(&priv->bss_free_list)) { + bss = list_entry(priv->bss_free_list.next, + struct xbss_element, list); + list_del(priv->bss_free_list.next); + + list_add_tail(&bss->list, &priv->bss_list); + } + + if (bss) { + /* Always update the BSS to get latest beacon info */ + memcpy(&bss->bss, atom, sizeof(bss->bss)); + bss->last_scanned = jiffies; + } +} + static int orinoco_process_scan_results(struct net_device *dev, unsigned char *buf, int len) @@ -1194,7 +1903,7 @@ static int orinoco_process_scan_results(struct net_device *dev, /* Read the entries one by one */ for (; offset + atom_len <= len; offset += atom_len) { int found = 0; - bss_element *bss = NULL; + struct bss_element *bss = NULL; /* Get next atom */ atom = (union hermes_scan_info *) (buf + offset); @@ -1216,7 +1925,7 @@ static int orinoco_process_scan_results(struct net_device *dev, /* Grab a bss off the free list */ if (!found && !list_empty(&priv->bss_free_list)) { bss = list_entry(priv->bss_free_list.next, - bss_element, list); + struct bss_element, list); list_del(priv->bss_free_list.next); list_add_tail(&bss->list, &priv->bss_list); @@ -1404,6 +2113,63 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) kfree(buf); } break; + case HERMES_INQ_CHANNELINFO: + { + struct agere_ext_scan_info *bss; + + if (!priv->scan_inprogress) { + printk(KERN_DEBUG "%s: Got chaninfo without scan, " + "len=%d\n", dev->name, len); + break; + } + + /* An empty result indicates that the scan is complete */ + if (len == 0) { + union iwreq_data wrqu; + + /* Scan is no longer in progress */ + priv->scan_inprogress = 0; + + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); + break; + } + + /* Sanity check */ + else if (len > sizeof(*bss)) { + printk(KERN_WARNING + "%s: Ext scan results too large (%d bytes). " + "Truncating results to %zd bytes.\n", + dev->name, len, sizeof(*bss)); + len = sizeof(*bss); + } else if (len < (offsetof(struct agere_ext_scan_info, + data) + 2)) { + /* Drop this result now so we don't have to + * keep checking later */ + printk(KERN_WARNING + "%s: Ext scan results too short (%d bytes)\n", + dev->name, len); + break; + } + + bss = kmalloc(sizeof(*bss), GFP_ATOMIC); + if (bss == NULL) + break; + + /* Read scan data */ + err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, + infofid, sizeof(info)); + if (err) { + kfree(bss); + break; + } + + orinoco_add_ext_scan_result(priv, bss); + + kfree(bss); + break; + } case HERMES_INQ_SEC_STAT_AGERE: /* Security status (Agere specific) */ /* Ignore this frame for now */ @@ -1586,7 +2352,7 @@ static int __orinoco_hw_set_wap(struct orinoco_private *priv) } /* Change the WEP keys and/or the current keys. Can be called - * either from __orinoco_hw_setup_wep() or directly from + * either from __orinoco_hw_setup_enc() or directly from * orinoco_ioctl_setiwencode(). In the later case the association * with the AP is not broken (if the firmware can handle it), * which is needed for 802.1x implementations. */ @@ -1646,14 +2412,16 @@ static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) return 0; } -static int __orinoco_hw_setup_wep(struct orinoco_private *priv) +static int __orinoco_hw_setup_enc(struct orinoco_private *priv) { hermes_t *hw = &priv->hw; int err = 0; int master_wep_flag; int auth_flag; + int enc_flag; - if (priv->wep_on) + /* Setup WEP keys for WEP and WPA */ + if (priv->encode_alg) __orinoco_hw_setup_wepkeys(priv); if (priv->wep_restrict) @@ -1661,9 +2429,16 @@ static int __orinoco_hw_setup_wep(struct orinoco_private *priv) else auth_flag = HERMES_AUTH_OPEN; + if (priv->wpa_enabled) + enc_flag = 2; + else if (priv->encode_alg == IW_ENCODE_ALG_WEP) + enc_flag = 1; + else + enc_flag = 0; + switch (priv->firmware_type) { case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ - if (priv->wep_on) { + if (priv->encode_alg == IW_ENCODE_ALG_WEP) { /* Enable the shared-key authentication. */ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFAUTHENTICATION_AGERE, @@ -1671,14 +2446,24 @@ static int __orinoco_hw_setup_wep(struct orinoco_private *priv) } err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFWEPENABLED_AGERE, - priv->wep_on); + enc_flag); if (err) return err; + + if (priv->has_wpa) { + /* Set WPA key management */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, + priv->key_mgmt); + if (err) + return err; + } + break; case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ - if (priv->wep_on) { + if (priv->encode_alg == IW_ENCODE_ALG_WEP) { if (priv->wep_restrict || (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | @@ -1710,6 +2495,84 @@ static int __orinoco_hw_setup_wep(struct orinoco_private *priv) return 0; } +/* key must be 32 bytes, including the tx and rx MIC keys. + * rsc must be 8 bytes + * tsc must be 8 bytes or NULL + */ +static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, + u8 *key, u8 *rsc, u8 *tsc) +{ + struct { + __le16 idx; + u8 rsc[IW_ENCODE_SEQ_MAX_SIZE]; + u8 key[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; + u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; + } __attribute__ ((packed)) buf; + int ret; + int err; + int k; + u16 xmitting; + + key_idx &= 0x3; + + if (set_tx) + key_idx |= 0x8000; + + buf.idx = cpu_to_le16(key_idx); + memcpy(buf.key, key, + sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); + + if (rsc == NULL) + memset(buf.rsc, 0, sizeof(buf.rsc)); + else + memcpy(buf.rsc, rsc, sizeof(buf.rsc)); + + if (tsc == NULL) { + memset(buf.tsc, 0, sizeof(buf.tsc)); + buf.tsc[4] = 0x10; + } else { + memcpy(buf.tsc, tsc, sizeof(buf.tsc)); + } + + /* Wait upto 100ms for tx queue to empty */ + k = 100; + do { + k--; + udelay(1000); + ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, + &xmitting); + if (ret) + break; + } while ((k > 0) && xmitting); + + if (k == 0) + ret = -ETIMEDOUT; + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, + &buf); + + return ret ? ret : err; +} + +static int orinoco_clear_tkip_key(struct orinoco_private *priv, + int key_idx) +{ + hermes_t *hw = &priv->hw; + int err; + + memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx])); + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, + key_idx); + if (err) + printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", + priv->ndev->name, err, key_idx); + return err; +} + static int __orinoco_program_rids(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); @@ -1906,10 +2769,10 @@ static int __orinoco_program_rids(struct net_device *dev) } /* Set up encryption */ - if (priv->has_wep) { - err = __orinoco_hw_setup_wep(priv); + if (priv->has_wep || priv->has_wpa) { + err = __orinoco_hw_setup_enc(priv); if (err) { - printk(KERN_ERR "%s: Error %d activating WEP\n", + printk(KERN_ERR "%s: Error %d activating encryption\n", dev->name, err); return err; } @@ -2047,6 +2910,12 @@ static void orinoco_reset(struct work_struct *work) } } + if (priv->do_fw_download) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + } + err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", @@ -2258,6 +3127,10 @@ static int determine_firmware(struct net_device *dev) priv->has_ibss = 1; priv->has_wep = 0; priv->has_big_wep = 0; + priv->has_alt_txcntl = 0; + priv->has_ext_scan = 0; + priv->has_wpa = 0; + priv->do_fw_download = 0; /* Determine capabilities from the firmware version */ switch (priv->firmware_type) { @@ -2277,8 +3150,11 @@ static int determine_firmware(struct net_device *dev) priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ priv->ibss_port = 1; priv->has_hostscan = (firmver >= 0x8000a); + priv->do_fw_download = 1; priv->broken_monitor = (firmver >= 0x80000); - + priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_wpa = (firmver >= 0x9002a); /* Tested with Agere firmware : * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II * Tested CableTron firmware : 4.32 => Anton */ @@ -2321,6 +3197,21 @@ static int determine_firmware(struct net_device *dev) firmver >= 0x31000; priv->has_preamble = (firmver >= 0x20000); priv->ibss_port = 4; + + /* Symbol firmware is found on various cards, but + * there has been no attempt to check firmware + * download on non-spectrum_cs based cards. + * + * Given that the Agere firmware download works + * differently, we should avoid doing a firmware + * download with the Symbol algorithm on non-spectrum + * cards. + * + * For now we can identify a spectrum_cs based card + * because it has a firmware reset function. + */ + priv->do_fw_download = (priv->stop_fw != NULL); + priv->broken_disableport = (firmver == 0x25013) || (firmver >= 0x30000 && firmver <= 0x31000); priv->has_hostscan = (firmver >= 0x31001) || @@ -2391,6 +3282,20 @@ static int orinoco_init(struct net_device *dev) goto out; } + if (priv->do_fw_download) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + + /* Check firmware version again */ + err = determine_firmware(dev); + if (err != 0) { + printk(KERN_ERR "%s: Incompatible firmware, aborting\n", + dev->name); + goto out; + } + } + if (priv->has_port3) printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); if (priv->has_ibss) @@ -2403,6 +3308,20 @@ static int orinoco_init(struct net_device *dev) else printk("40-bit key\n"); } + if (priv->has_wpa) { + printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name); + if (orinoco_mic_init(priv)) { + printk(KERN_ERR "%s: Failed to setup MIC crypto " + "algorithm. Disabling WPA support\n", dev->name); + priv->has_wpa = 0; + } + } + + /* Now we have the firmware capabilities, allocate appropiate + * sized scan buffers */ + if (orinoco_bss_data_allocate(priv)) + goto out; + orinoco_bss_data_init(priv); /* Get the MAC address */ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, @@ -2518,8 +3437,13 @@ static int orinoco_init(struct net_device *dev) priv->channel = 0; /* use firmware default */ priv->promiscuous = 0; - priv->wep_on = 0; + priv->encode_alg = IW_ENCODE_ALG_NONE; priv->tx_key = 0; + priv->wpa_enabled = 0; + priv->tkip_cm_active = 0; + priv->key_mgmt = 0; + priv->wpa_ie_len = 0; + priv->wpa_ie = NULL; /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ @@ -2533,8 +3457,11 @@ static int orinoco_init(struct net_device *dev) return err; } -struct net_device *alloc_orinocodev(int sizeof_card, - int (*hard_reset)(struct orinoco_private *)) +struct net_device +*alloc_orinocodev(int sizeof_card, + struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)) { struct net_device *dev; struct orinoco_private *priv; @@ -2549,10 +3476,7 @@ struct net_device *alloc_orinocodev(int sizeof_card, + sizeof(struct orinoco_private)); else priv->card = NULL; - - if (orinoco_bss_data_allocate(priv)) - goto err_out_free; - orinoco_bss_data_init(priv); + priv->dev = device; /* Setup / override net_device fields */ dev->init = orinoco_init; @@ -2570,10 +3494,14 @@ struct net_device *alloc_orinocodev(int sizeof_card, dev->set_multicast_list = orinoco_set_multicast_list; /* we use the default eth_mac_addr for setting the MAC addr */ + /* Reserve space in skb for the SNAP header */ + dev->hard_header_len += ENCAPS_OVERHEAD; + /* Set up default callbacks */ dev->open = orinoco_open; dev->stop = orinoco_stop; priv->hard_reset = hard_reset; + priv->stop_fw = stop_fw; spin_lock_init(&priv->lock); priv->open = 0; @@ -2584,20 +3512,27 @@ struct net_device *alloc_orinocodev(int sizeof_card, INIT_WORK(&priv->join_work, orinoco_join_ap); INIT_WORK(&priv->wevent_work, orinoco_send_wevents); + INIT_LIST_HEAD(&priv->rx_list); + tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, + (unsigned long) dev); + netif_carrier_off(dev); priv->last_linkstatus = 0xffff; return dev; - -err_out_free: - free_netdev(dev); - return NULL; } void free_orinocodev(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); + /* No need to empty priv->rx_list: if the tasklet is scheduled + * when we call tasklet_kill it will run one final time, + * emptying the list */ + tasklet_kill(&priv->rx_tasklet); + priv->wpa_ie_len = 0; + kfree(priv->wpa_ie); + orinoco_mic_free(priv); orinoco_bss_data_free(priv); free_netdev(dev); } @@ -2909,7 +3844,7 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, memset(range, 0, sizeof(struct iw_range)); range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 14; + range->we_version_source = 22; /* Set available channels/frequencies */ range->num_channels = NUM_CHANNELS; @@ -2939,6 +3874,9 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, } } + if (priv->has_wpa) + range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP; + if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ /* Quality stats meaningless in ad-hoc mode */ } else { @@ -2986,6 +3924,11 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, range->min_r_time = 0; range->max_r_time = 65535 * 1000; /* ??? */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + range->scan_capa = IW_SCAN_CAPA_ESSID; + else + range->scan_capa = IW_SCAN_CAPA_NONE; + /* Event capability (kernel) */ IW_EVENT_CAPA_SET_KERNEL(range->event_capa); /* Event capability (driver) */ @@ -3005,7 +3948,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, struct orinoco_private *priv = netdev_priv(dev); int index = (erq->flags & IW_ENCODE_INDEX) - 1; int setindex = priv->tx_key; - int enable = priv->wep_on; + int encode_alg = priv->encode_alg; int restricted = priv->wep_restrict; u16 xlen = 0; int err = -EINPROGRESS; /* Call commit handler */ @@ -3026,6 +3969,10 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, if (orinoco_lock(priv, &flags) != 0) return -EBUSY; + /* Clear any TKIP key we have */ + if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP)) + (void) orinoco_clear_tkip_key(priv, setindex); + if (erq->length > 0) { if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) index = priv->tx_key; @@ -3039,9 +3986,9 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, xlen = 0; /* Switch on WEP if off */ - if ((!enable) && (xlen > 0)) { + if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) { setindex = index; - enable = 1; + encode_alg = IW_ENCODE_ALG_WEP; } } else { /* Important note : if the user do "iwconfig eth0 enc off", @@ -3063,7 +4010,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, } if (erq->flags & IW_ENCODE_DISABLED) - enable = 0; + encode_alg = IW_ENCODE_ALG_NONE; if (erq->flags & IW_ENCODE_OPEN) restricted = 0; if (erq->flags & IW_ENCODE_RESTRICTED) @@ -3078,14 +4025,15 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, priv->tx_key = setindex; /* Try fast key change if connected and only keys are changed */ - if (priv->wep_on && enable && (priv->wep_restrict == restricted) && + if ((priv->encode_alg == encode_alg) && + (priv->wep_restrict == restricted) && netif_carrier_ok(dev)) { err = __orinoco_hw_setup_wepkeys(priv); /* No need to commit if successful */ goto out; } - priv->wep_on = enable; + priv->encode_alg = encode_alg; priv->wep_restrict = restricted; out: @@ -3114,7 +4062,7 @@ static int orinoco_ioctl_getiwencode(struct net_device *dev, index = priv->tx_key; erq->flags = 0; - if (! priv->wep_on) + if (!priv->encode_alg) erq->flags |= IW_ENCODE_DISABLED; erq->flags |= index + 1; @@ -3689,6 +4637,399 @@ static int orinoco_ioctl_getpower(struct net_device *dev, return err; } +static int orinoco_ioctl_set_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, alg = ext->alg, set_key = 1; + unsigned long flags; + int err = -EINVAL; + u16 key_len; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Determine and validate the key index */ + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > WEP_KEYS)) + goto out; + idx--; + } else + idx = priv->tx_key; + + if (encoding->flags & IW_ENCODE_DISABLED) + alg = IW_ENCODE_ALG_NONE; + + if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { + /* Clear any TKIP TX key we had */ + (void) orinoco_clear_tkip_key(priv, priv->tx_key); + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + priv->tx_key = idx; + set_key = ((alg == IW_ENCODE_ALG_TKIP) || + (ext->key_len > 0)) ? 1 : 0; + } + + if (set_key) { + /* Set the requested key first */ + switch (alg) { + case IW_ENCODE_ALG_NONE: + priv->encode_alg = alg; + priv->keys[idx].len = 0; + break; + + case IW_ENCODE_ALG_WEP: + if (ext->key_len > SMALL_KEY_SIZE) + key_len = LARGE_KEY_SIZE; + else if (ext->key_len > 0) + key_len = SMALL_KEY_SIZE; + else + goto out; + + priv->encode_alg = alg; + priv->keys[idx].len = cpu_to_le16(key_len); + + key_len = min(ext->key_len, key_len); + + memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE); + memcpy(priv->keys[idx].data, ext->key, key_len); + break; + + case IW_ENCODE_ALG_TKIP: + { + hermes_t *hw = &priv->hw; + u8 *tkip_iv = NULL; + + if (!priv->has_wpa || + (ext->key_len > sizeof(priv->tkip_key[0]))) + goto out; + + priv->encode_alg = alg; + memset(&priv->tkip_key[idx], 0, + sizeof(priv->tkip_key[idx])); + memcpy(&priv->tkip_key[idx], ext->key, ext->key_len); + + if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) + tkip_iv = &ext->rx_seq[0]; + + err = __orinoco_hw_set_tkip_key(hw, idx, + ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, + (u8 *) &priv->tkip_key[idx], + tkip_iv, NULL); + if (err) + printk(KERN_ERR "%s: Error %d setting TKIP key" + "\n", dev->name, err); + + goto out; + } + default: + goto out; + } + } + err = -EINPROGRESS; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_get_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, max_key_len; + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = -EINVAL; + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + goto out; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > WEP_KEYS)) + goto out; + idx--; + } else + idx = priv->tx_key; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + ext->alg = priv->encode_alg; + switch (priv->encode_alg) { + case IW_ENCODE_ALG_NONE: + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + break; + case IW_ENCODE_ALG_WEP: + ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len), + max_key_len); + memcpy(ext->key, priv->keys[idx].data, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + case IW_ENCODE_ALG_TKIP: + ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key), + max_key_len); + memcpy(ext->key, &priv->tkip_key[idx], ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + } + + err = 0; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = -EINPROGRESS; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + case IW_AUTH_PRIVACY_INVOKED: + case IW_AUTH_DROP_UNENCRYPTED: + /* + * orinoco does not use these parameters + */ + break; + + case IW_AUTH_KEY_MGMT: + /* wl_lkm implies value 2 == PSK for Hermes I + * which ties in with WEXT + * no other hints tho :( + */ + priv->key_mgmt = param->value; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + /* When countermeasures are enabled, shut down the + * card; when disabled, re-enable the card. This must + * take effect immediately. + * + * TODO: Make sure that the EAPOL message is getting + * out before card disabled + */ + if (param->value) { + priv->tkip_cm_active = 1; + ret = hermes_enable_port(hw, 0); + } else { + priv->tkip_cm_active = 0; + ret = hermes_disable_port(hw, 0); + } + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_SHARED_KEY) + priv->wep_restrict = 1; + else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) + priv->wep_restrict = 0; + else + ret = -EINVAL; + break; + + case IW_AUTH_WPA_ENABLED: + if (priv->has_wpa) { + priv->wpa_enabled = param->value ? 1 : 0; + } else { + if (param->value) + ret = -EOPNOTSUPP; + /* else silently accept disable of WPA */ + priv->wpa_enabled = 0; + } + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_get_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_KEY_MGMT: + param->value = priv->key_mgmt; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + param->value = priv->tkip_cm_active; + break; + + case IW_AUTH_80211_AUTH_ALG: + if (priv->wep_restrict) + param->value = IW_AUTH_ALG_SHARED_KEY; + else + param->value = IW_AUTH_ALG_OPEN_SYSTEM; + break; + + case IW_AUTH_WPA_ENABLED: + param->value = priv->wpa_enabled; + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_set_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + u8 *buf; + unsigned long flags; + int err = 0; + + if ((wrqu->data.length > MAX_WPA_IE_LEN) || + (wrqu->data.length && (extra == NULL))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (wrqu->data.length) { + buf = kmalloc(wrqu->data.length, GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + goto out; + } + + memcpy(buf, extra, wrqu->data.length); + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + } else { + kfree(priv->wpa_ie); + priv->wpa_ie = NULL; + priv->wpa_ie_len = 0; + } + + if (priv->wpa_ie) { + /* Looks like wl_lkm wants to check the auth alg, and + * somehow pass it to the firmware. + * Instead it just calls the key mgmt rid + * - we do this in set auth. + */ + } + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_get_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { + wrqu->data.length = 0; + goto out; + } + + if (wrqu->data.length < priv->wpa_ie_len) { + err = -E2BIG; + goto out; + } + + wrqu->data.length = priv->wpa_ie_len; + memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_set_mlme(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_mlme *mlme = (struct iw_mlme *)extra; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + /* silently ignore */ + break; + + case IW_MLME_DISASSOC: + { + struct { + u8 addr[ETH_ALEN]; + __le16 reason_code; + } __attribute__ ((packed)) buf; + + memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN); + buf.reason_code = cpu_to_le16(mlme->reason_code); + ret = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFDISASSOCIATE, + &buf); + break; + } + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_request_info *info, struct iw_param *rrq, @@ -3947,14 +5288,15 @@ static int orinoco_ioctl_getrid(struct net_device *dev, return err; } -/* Trigger a scan (look for other cells in the vicinity */ +/* Trigger a scan (look for other cells in the vicinity) */ static int orinoco_ioctl_setscan(struct net_device *dev, struct iw_request_info *info, - struct iw_param *srq, + struct iw_point *srq, char *extra) { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; + struct iw_scan_req *si = (struct iw_scan_req *) extra; int err = 0; unsigned long flags; @@ -3986,7 +5328,6 @@ static int orinoco_ioctl_setscan(struct net_device *dev, * we access scan variables in priv is critical. * o scan_inprogress : not touched by irq handler * o scan_mode : not touched by irq handler - * o scan_len : synchronised with scan_result * Before modifying anything on those variables, please think hard ! * Jean II */ @@ -4016,13 +5357,43 @@ static int orinoco_ioctl_setscan(struct net_device *dev, } break; case FIRMWARE_TYPE_AGERE: - err = hermes_write_wordrec(hw, USER_BAP, + if (priv->scan_mode & IW_SCAN_THIS_ESSID) { + struct hermes_idstring idbuf; + size_t len = min(sizeof(idbuf.val), + (size_t) si->essid_len); + idbuf.len = cpu_to_le16(len); + memcpy(idbuf.val, si->essid, len); + + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + HERMES_BYTES_TO_RECLEN(len + 2), + &idbuf); + } else + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFSCANSSID_AGERE, 0); /* Any ESSID */ if (err) break; - err = hermes_inquire(hw, HERMES_INQ_SCAN); + if (priv->has_ext_scan) { + /* Clear scan results at the start of + * an extended scan */ + orinoco_clear_scan_results(priv, + msecs_to_jiffies(15000)); + + /* TODO: Is this available on older firmware? + * Can we use it to scan specific channels + * for IW_SCAN_THIS_FREQ? */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANCHANNELS2GHZ, + 0x7FFF); + if (err) + goto out; + + err = hermes_inquire(hw, + HERMES_INQ_CHANNELINFO); + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); break; } } else @@ -4040,8 +5411,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, #define MAX_CUSTOM_LEN 64 /* Translate scan data returned from the card to a card independant - * format that the Wireless Tools will understand - Jean II - * Return message length or -errno for fatal errors */ + * format that the Wireless Tools will understand - Jean II */ static inline char *orinoco_translate_scan(struct net_device *dev, struct iw_request_info *info, char *current_ev, @@ -4053,9 +5423,10 @@ static inline char *orinoco_translate_scan(struct net_device *dev, u16 capabilities; u16 channel; struct iw_event iwe; /* Temporary buffer */ - char *p; char custom[MAX_CUSTOM_LEN]; + memset(&iwe, 0, sizeof(iwe)); + /* First entry *MUST* be the AP MAC address */ iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; @@ -4077,8 +5448,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, /* Add mode */ iwe.cmd = SIOCGIWMODE; capabilities = le16_to_cpu(bss->a.capabilities); - if (capabilities & 0x3) { - if (capabilities & 0x1) + if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + if (capabilities & WLAN_CAPABILITY_ESS) iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; @@ -4088,17 +5459,22 @@ static inline char *orinoco_translate_scan(struct net_device *dev, channel = bss->s.channel; if ((channel >= 1) && (channel <= NUM_CHANNELS)) { - /* Add frequency */ + /* Add channel and frequency */ iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + iwe.u.freq.m = channel_frequency[channel-1] * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } - /* Add quality statistics */ + /* Add quality statistics. level and noise in dB. No link quality */ iwe.cmd = IWEVQUAL; - iwe.u.qual.updated = 0x10; /* no link quality */ + iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95; iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95; /* Wireless tools prior to 27.pre22 will show link quality @@ -4112,25 +5488,13 @@ static inline char *orinoco_translate_scan(struct net_device *dev, /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; - if (capabilities & 0x10) + if (capabilities & WLAN_CAPABILITY_PRIVACY) iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, bss->a.essid); - - /* Add EXTRA: Age to display seconds since last beacon/probe response - * for given network. */ - iwe.cmd = IWEVCUSTOM; - p = custom; - p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), - " Last beacon: %dms ago", - jiffies_to_msecs(jiffies - last_scanned)); - iwe.u.data.length = p - custom; - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); + &iwe, NULL); /* Bit rate is not available in Lucent/Agere firmwares */ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { @@ -4152,7 +5516,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, if (bss->p.rates[i] == 0x0) break; /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000); + iwe.u.bitrate.value = + ((bss->p.rates[i] & 0x7f) * 500000); current_val = iwe_stream_add_value(info, current_ev, current_val, end_buf, &iwe, @@ -4163,6 +5528,199 @@ static inline char *orinoco_translate_scan(struct net_device *dev, current_ev = current_val; } + /* Beacon interval */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "bcn_int=%d", + le16_to_cpu(bss->a.beacon_interv)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Capabilites */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "capab=0x%04x", + capabilities); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - last_scanned)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + return current_ev; +} + +static inline char *orinoco_translate_ext_scan(struct net_device *dev, + struct iw_request_info *info, + char *current_ev, + char *end_buf, + struct agere_ext_scan_info *bss, + unsigned int last_scanned) +{ + u16 capabilities; + u16 channel; + struct iw_event iwe; /* Temporary buffer */ + char custom[MAX_CUSTOM_LEN]; + u8 *ie; + + memset(&iwe, 0, sizeof(iwe)); + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + ie = bss->data; + iwe.u.data.length = ie[1]; + if (iwe.u.data.length) { + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, &ie[2]); + } + + /* Add mode */ + capabilities = le16_to_cpu(bss->capabilities); + if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + iwe.cmd = SIOCGIWMODE; + if (capabilities & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + } + + ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_DS_SET); + channel = ie ? ie[2] : 0; + if ((channel >= 1) && (channel <= NUM_CHANNELS)) { + /* Add channel and frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + + iwe.u.freq.m = channel_frequency[channel-1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } + + /* Add quality statistics. level and noise in dB. No link quality */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; + iwe.u.qual.level = bss->level - 0x95; + iwe.u.qual.noise = bss->noise - 0x95; + /* Wireless tools prior to 27.pre22 will show link quality + * anyway, so we provide a reasonable value. */ + if (iwe.u.qual.level > iwe.u.qual.noise) + iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; + else + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (capabilities & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); + + /* WPA IE */ + ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data)); + if (ie) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = ie[1] + 2; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ie); + } + + /* RSN IE */ + ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_RSN); + if (ie) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = ie[1] + 2; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ie); + } + + ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_RATES); + if (ie) { + char *p = current_ev + iwe_stream_lcp_len(info); + int i; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + + for (i = 2; i < (ie[1] + 2); i++) { + iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000); + p = iwe_stream_add_value(info, current_ev, p, end_buf, + &iwe, IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if (p > (current_ev + iwe_stream_lcp_len(info))) + current_ev = p; + } + + /* Timestamp */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = + snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx", + (unsigned long long) le64_to_cpu(bss->timestamp)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Beacon interval */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "bcn_int=%d", + le16_to_cpu(bss->beacon_interval)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Capabilites */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "capab=0x%04x", + capabilities); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - last_scanned)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + return current_ev; } @@ -4173,7 +5731,6 @@ static int orinoco_ioctl_getscan(struct net_device *dev, char *extra) { struct orinoco_private *priv = netdev_priv(dev); - bss_element *bss; int err = 0; unsigned long flags; char *current_ev = extra; @@ -4193,18 +5750,47 @@ static int orinoco_ioctl_getscan(struct net_device *dev, goto out; } - list_for_each_entry(bss, &priv->bss_list, list) { - /* Translate to WE format this entry */ - current_ev = orinoco_translate_scan(dev, info, current_ev, - extra + srq->length, - &bss->bss, - bss->last_scanned); - - /* Check if there is space for one more entry */ - if ((extra + srq->length - current_ev) <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a bigger buffer */ - err = -E2BIG; - goto out; + if (priv->has_ext_scan) { + struct xbss_element *bss; + + list_for_each_entry(bss, &priv->bss_list, list) { + /* Translate this entry to WE format */ + current_ev = + orinoco_translate_ext_scan(dev, info, + current_ev, + extra + srq->length, + &bss->bss, + bss->last_scanned); + + /* Check if there is space for one more entry */ + if ((extra + srq->length - current_ev) + <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a + * bigger buffer */ + err = -E2BIG; + goto out; + } + } + + } else { + struct bss_element *bss; + + list_for_each_entry(bss, &priv->bss_list, list) { + /* Translate this entry to WE format */ + current_ev = orinoco_translate_scan(dev, info, + current_ev, + extra + srq->length, + &bss->bss, + bss->last_scanned); + + /* Check if there is space for one more entry */ + if ((extra + srq->length - current_ev) + <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a + * bigger buffer */ + err = -E2BIG; + goto out; + } } } @@ -4295,39 +5881,48 @@ static const struct iw_priv_args orinoco_privtab[] = { * Structures to export the Wireless Handlers */ +#define STD_IW_HANDLER(id, func) \ + [IW_IOCTL_IDX(id)] = (iw_handler) func static const iw_handler orinoco_handler[] = { - [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit, - [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname, - [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq, - [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq, - [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode, - [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode, - [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, - [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, - [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, - [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, - [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, - [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, - [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, - [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, - [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, - [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, - [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan, - [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid, - [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid, - [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick, - [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick, - [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate, - [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate, - [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts, - [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts, - [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag, - [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag, - [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry, - [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode, - [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode, - [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower, - [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower, + STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit), + STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname), + STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq), + STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq), + STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode), + STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode), + STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens), + STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens), + STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange), + STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), + STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), + STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), + STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), + STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap), + STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap), + STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan), + STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan), + STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid), + STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid), + STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick), + STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick), + STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate), + STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate), + STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts), + STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts), + STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag), + STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag), + STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry), + STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode), + STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode), + STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower), + STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower), + STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), + STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), + STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), + STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), + STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), + STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), + STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), }; diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index c6b1858abde..981570bd3b9 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -9,6 +9,7 @@ #define DRIVER_VERSION "0.15" +#include <linux/interrupt.h> #include <linux/netdevice.h> #include <linux/wireless.h> #include <net/iw_handler.h> @@ -30,27 +31,57 @@ struct orinoco_key { char data[ORINOCO_MAX_KEY_SIZE]; } __attribute__ ((packed)); +#define TKIP_KEYLEN 16 +#define MIC_KEYLEN 8 + +struct orinoco_tkip_key { + u8 tkip[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; +}; + typedef enum { FIRMWARE_TYPE_AGERE, FIRMWARE_TYPE_INTERSIL, FIRMWARE_TYPE_SYMBOL } fwtype_t; -typedef struct { +struct bss_element { union hermes_scan_info bss; unsigned long last_scanned; struct list_head list; -} bss_element; +}; + +struct xbss_element { + struct agere_ext_scan_info bss; + unsigned long last_scanned; + struct list_head list; +}; + +struct hermes_rx_descriptor; + +struct orinoco_rx_data { + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + struct list_head list; +}; struct orinoco_private { void *card; /* Pointer to card dependent structure */ + struct device *dev; int (*hard_reset)(struct orinoco_private *); + int (*stop_fw)(struct orinoco_private *, int); /* Synchronisation stuff */ spinlock_t lock; int hw_unavailable; struct work_struct reset_work; + /* Interrupt tasklets */ + struct tasklet_struct rx_tasklet; + struct list_head rx_list; + struct orinoco_rx_data *rx_data; + /* driver state */ int open; u16 last_linkstatus; @@ -83,13 +114,17 @@ struct orinoco_private { unsigned int has_preamble:1; unsigned int has_sensitivity:1; unsigned int has_hostscan:1; + unsigned int has_alt_txcntl:1; + unsigned int has_ext_scan:1; + unsigned int has_wpa:1; + unsigned int do_fw_download:1; unsigned int broken_disableport:1; unsigned int broken_monitor:1; /* Configuration paramaters */ u32 iw_mode; int prefer_port3; - u16 wep_on, wep_restrict, tx_key; + u16 encode_alg, wep_restrict, tx_key; struct orinoco_key keys[ORINOCO_MAX_KEYS]; int bitratemode; char nick[IW_ESSID_MAX_SIZE+1]; @@ -113,10 +148,22 @@ struct orinoco_private { /* Scanning support */ struct list_head bss_list; struct list_head bss_free_list; - bss_element *bss_data; + void *bss_xbss_data; int scan_inprogress; /* Scan pending... */ u32 scan_mode; /* Type of scan done */ + + /* WPA support */ + u8 *wpa_ie; + int wpa_ie_len; + + struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS]; + struct crypto_hash *rx_tfm_mic; + struct crypto_hash *tx_tfm_mic; + + unsigned int wpa_enabled:1; + unsigned int tkip_cm_active:1; + unsigned int key_mgmt:3; }; #ifdef ORINOCO_DEBUG @@ -130,8 +177,10 @@ extern int orinoco_debug; /* Exported prototypes */ /********************************************************************/ -extern struct net_device *alloc_orinocodev(int sizeof_card, - int (*hard_reset)(struct orinoco_private *)); +extern struct net_device *alloc_orinocodev( + int sizeof_card, struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)); extern void free_orinocodev(struct net_device *dev); extern int __orinoco_up(struct net_device *dev); extern int __orinoco_down(struct net_device *dev); diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 1c216e015f6..9eaa252c243 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -109,7 +109,8 @@ orinoco_cs_probe(struct pcmcia_device *link) struct orinoco_private *priv; struct orinoco_pccard *card; - dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset); + dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + orinoco_cs_hard_reset, NULL); if (! dev) return -ENOMEM; priv = netdev_priv(dev); @@ -120,7 +121,7 @@ orinoco_cs_probe(struct pcmcia_device *link) link->priv = dev; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = orinoco_interrupt; link->irq.Instance = dev; diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index 35ec5fcf81a..2fc86596302 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -182,7 +182,8 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_nortel_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_nortel_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c index 2547d5dac0d..4ebd638a073 100644 --- a/drivers/net/wireless/orinoco_pci.c +++ b/drivers/net/wireless/orinoco_pci.c @@ -139,7 +139,8 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_pci_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c index 98fe165337d..ef761857bb3 100644 --- a/drivers/net/wireless/orinoco_plx.c +++ b/drivers/net/wireless/orinoco_plx.c @@ -221,7 +221,8 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_plx_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_plx_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c index df493185a4a..ede24ec309c 100644 --- a/drivers/net/wireless/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco_tmd.c @@ -124,7 +124,8 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_tmd_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index 4801a363507..1d0704fe146 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -1,5 +1,5 @@ -#ifndef PRISM54_H -#define PRISM54_H +#ifndef P54_H +#define P54_H /* * Shared defines for all mac80211 Prism54 code @@ -19,13 +19,24 @@ enum control_frame_types { P54_CONTROL_TYPE_CHANNEL_CHANGE, P54_CONTROL_TYPE_FREQDONE, P54_CONTROL_TYPE_DCFINIT, - P54_CONTROL_TYPE_FREEQUEUE = 7, + P54_CONTROL_TYPE_ENCRYPTION, + P54_CONTROL_TYPE_TIM, + P54_CONTROL_TYPE_POWERMGT, + P54_CONTROL_TYPE_FREEQUEUE, P54_CONTROL_TYPE_TXDONE, P54_CONTROL_TYPE_PING, P54_CONTROL_TYPE_STAT_READBACK, P54_CONTROL_TYPE_BBP, P54_CONTROL_TYPE_EEPROM_READBACK, - P54_CONTROL_TYPE_LED + P54_CONTROL_TYPE_LED, + P54_CONTROL_TYPE_GPIO, + P54_CONTROL_TYPE_TIMER, + P54_CONTROL_TYPE_MODULATION, + P54_CONTROL_TYPE_SYNTH_CONFIG, + P54_CONTROL_TYPE_DETECTOR_VALUE, + P54_CONTROL_TYPE_XBOW_SYNTH_CFG, + P54_CONTROL_TYPE_CCE_QUIET, + P54_CONTROL_TYPE_PSM_STA_UNLOCK, }; struct p54_control_hdr { @@ -38,11 +49,15 @@ struct p54_control_hdr { u8 data[0]; } __attribute__ ((packed)); -#define EEPROM_READBACK_LEN (sizeof(struct p54_control_hdr) + 4 /* p54_eeprom_lm86 */) -#define MAX_RX_SIZE (IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct p54_control_hdr) + 20 /* length of struct p54_rx_hdr */ + 16 ) +#define EEPROM_READBACK_LEN 0x3fc #define ISL38XX_DEV_FIRMWARE_ADDR 0x20000 +#define FW_FMAC 0x464d4143 +#define FW_LM86 0x4c4d3836 +#define FW_LM87 0x4c4d3837 +#define FW_LM20 0x4c4d3230 + struct p54_common { u32 rx_start; u32 rx_end; @@ -53,27 +68,43 @@ struct p54_common { void (*stop)(struct ieee80211_hw *dev); int mode; u16 seqno; + u16 rx_mtu; + u8 headroom; + u8 tailroom; struct mutex conf_mutex; u8 mac_addr[ETH_ALEN]; u8 bssid[ETH_ALEN]; + __le16 filter_type; struct pda_iq_autocal_entry *iq_autocal; unsigned int iq_autocal_len; struct pda_channel_output_limit *output_limit; unsigned int output_limit_len; struct pda_pa_curve_data *curve_data; - __le16 rxhw; + unsigned int filter_flags; + u16 rxhw; u8 version; + u8 rx_antenna; unsigned int tx_hdr_len; void *cached_vdcf; unsigned int fw_var; - struct ieee80211_tx_queue_stats tx_stats[4]; + unsigned int fw_interface; + unsigned int output_power; + u32 tsf_low32; + u32 tsf_high32; + struct ieee80211_tx_queue_stats tx_stats[8]; + struct ieee80211_low_level_stats stats; + struct timer_list stats_timer; + struct completion stats_comp; + void *cached_stats; + int noise; + void *eeprom; + struct completion eeprom_comp; }; int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb); -void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw); -int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len); -void p54_fill_eeprom_readback(struct p54_control_hdr *hdr); +int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw); +int p54_read_eeprom(struct ieee80211_hw *dev); struct ieee80211_hw *p54_init_common(size_t priv_data_len); void p54_free_common(struct ieee80211_hw *dev); -#endif /* PRISM54_H */ +#endif /* P54_H */ diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 29be3dc8ee0..1994aa199d3 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -27,7 +27,7 @@ MODULE_DESCRIPTION("Softmac Prism54 common code"); MODULE_LICENSE("GPL"); MODULE_ALIAS("prism54common"); -static struct ieee80211_rate p54_rates[] = { +static struct ieee80211_rate p54_bgrates[] = { { .bitrate = 10, .hw_value = 0, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, @@ -42,7 +42,7 @@ static struct ieee80211_rate p54_rates[] = { { .bitrate = 540, .hw_value = 11, }, }; -static struct ieee80211_channel p54_channels[] = { +static struct ieee80211_channel p54_bgchannels[] = { { .center_freq = 2412, .hw_value = 1, }, { .center_freq = 2417, .hw_value = 2, }, { .center_freq = 2422, .hw_value = 3, }, @@ -60,14 +60,69 @@ static struct ieee80211_channel p54_channels[] = { }; static struct ieee80211_supported_band band_2GHz = { - .channels = p54_channels, - .n_channels = ARRAY_SIZE(p54_channels), - .bitrates = p54_rates, - .n_bitrates = ARRAY_SIZE(p54_rates), + .channels = p54_bgchannels, + .n_channels = ARRAY_SIZE(p54_bgchannels), + .bitrates = p54_bgrates, + .n_bitrates = ARRAY_SIZE(p54_bgrates), }; +static struct ieee80211_rate p54_arates[] = { + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static struct ieee80211_channel p54_achannels[] = { + { .center_freq = 4920 }, + { .center_freq = 4940 }, + { .center_freq = 4960 }, + { .center_freq = 4980 }, + { .center_freq = 5040 }, + { .center_freq = 5060 }, + { .center_freq = 5080 }, + { .center_freq = 5170 }, + { .center_freq = 5180 }, + { .center_freq = 5190 }, + { .center_freq = 5200 }, + { .center_freq = 5210 }, + { .center_freq = 5220 }, + { .center_freq = 5230 }, + { .center_freq = 5240 }, + { .center_freq = 5260 }, + { .center_freq = 5280 }, + { .center_freq = 5300 }, + { .center_freq = 5320 }, + { .center_freq = 5500 }, + { .center_freq = 5520 }, + { .center_freq = 5540 }, + { .center_freq = 5560 }, + { .center_freq = 5580 }, + { .center_freq = 5600 }, + { .center_freq = 5620 }, + { .center_freq = 5640 }, + { .center_freq = 5660 }, + { .center_freq = 5680 }, + { .center_freq = 5700 }, + { .center_freq = 5745 }, + { .center_freq = 5765 }, + { .center_freq = 5785 }, + { .center_freq = 5805 }, + { .center_freq = 5825 }, +}; + +static struct ieee80211_supported_band band_5GHz = { + .channels = p54_achannels, + .n_channels = ARRAY_SIZE(p54_achannels), + .bitrates = p54_arates, + .n_bitrates = ARRAY_SIZE(p54_arates), +}; -void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) +int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) { struct p54_common *priv = dev->priv; struct bootrec_exp_if *exp_if; @@ -79,7 +134,7 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) int i; if (priv->rx_start) - return; + return 0; while (data < end_data && *data) data++; @@ -94,7 +149,9 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) u32 code = le32_to_cpu(bootrec->code); switch (code) { case BR_CODE_COMPONENT_ID: - switch (be32_to_cpu(*(__be32 *)bootrec->data)) { + priv->fw_interface = be32_to_cpup((__be32 *) + bootrec->data); + switch (priv->fw_interface) { case FW_FMAC: printk(KERN_INFO "p54: FreeMAC firmware\n"); break; @@ -105,7 +162,7 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) printk(KERN_INFO "p54: LM86 firmware\n"); break; case FW_LM87: - printk(KERN_INFO "p54: LM87 firmware - not supported yet!\n"); + printk(KERN_INFO "p54: LM87 firmware\n"); break; default: printk(KERN_INFO "p54: unknown firmware\n"); @@ -117,11 +174,21 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) if (strnlen((unsigned char*)bootrec->data, 24) < 24) fw_version = (unsigned char*)bootrec->data; break; - case BR_CODE_DESCR: - priv->rx_start = le32_to_cpu(((__le32 *)bootrec->data)[1]); + case BR_CODE_DESCR: { + struct bootrec_desc *desc = + (struct bootrec_desc *)bootrec->data; + priv->rx_start = le32_to_cpu(desc->rx_start); /* FIXME add sanity checking */ - priv->rx_end = le32_to_cpu(((__le32 *)bootrec->data)[2]) - 0x3500; + priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500; + priv->headroom = desc->headroom; + priv->tailroom = desc->tailroom; + if (le32_to_cpu(bootrec->len) == 11) + priv->rx_mtu = le16_to_cpu(bootrec->rx_mtu); + else + priv->rx_mtu = (size_t) + 0x620 - priv->tx_hdr_len; break; + } case BR_CODE_EXPOSED_IF: exp_if = (struct bootrec_exp_if *) bootrec->data; for (i = 0; i < (len * sizeof(*exp_if) / 4); i++) @@ -146,23 +213,25 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) if (priv->fw_var >= 0x300) { /* Firmware supports QoS, use it! */ - priv->tx_stats[0].limit = 3; - priv->tx_stats[1].limit = 4; - priv->tx_stats[2].limit = 3; - priv->tx_stats[3].limit = 1; + priv->tx_stats[4].limit = 3; + priv->tx_stats[5].limit = 4; + priv->tx_stats[6].limit = 3; + priv->tx_stats[7].limit = 1; dev->queues = 4; } + + return 0; } EXPORT_SYMBOL_GPL(p54_parse_firmware); -static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev, - struct pda_pa_curve_data *curve_data) +static int p54_convert_rev0(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) { struct p54_common *priv = dev->priv; - struct pda_pa_curve_data_sample_rev1 *rev1; - struct pda_pa_curve_data_sample_rev0 *rev0; + struct p54_pa_curve_data_sample *dst; + struct pda_pa_curve_data_sample_rev0 *src; size_t cd_len = sizeof(*curve_data) + - (curve_data->points_per_channel*sizeof(*rev1) + 2) * + (curve_data->points_per_channel*sizeof(*dst) + 2) * curve_data->channels; unsigned int i, j; void *source, *target; @@ -180,28 +249,68 @@ static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev, *((__le16 *)target) = *freq; target += sizeof(__le16); for (j = 0; j < curve_data->points_per_channel; j++) { - rev1 = target; - rev0 = source; + dst = target; + src = source; - rev1->rf_power = rev0->rf_power; - rev1->pa_detector = rev0->pa_detector; - rev1->data_64qam = rev0->pcv; + dst->rf_power = src->rf_power; + dst->pa_detector = src->pa_detector; + dst->data_64qam = src->pcv; /* "invent" the points for the other modulations */ #define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y) - rev1->data_16qam = SUB(rev0->pcv, 12); - rev1->data_qpsk = SUB(rev1->data_16qam, 12); - rev1->data_bpsk = SUB(rev1->data_qpsk, 12); - rev1->data_barker= SUB(rev1->data_bpsk, 14); + dst->data_16qam = SUB(src->pcv, 12); + dst->data_qpsk = SUB(dst->data_16qam, 12); + dst->data_bpsk = SUB(dst->data_qpsk, 12); + dst->data_barker = SUB(dst->data_bpsk, 14); #undef SUB - target += sizeof(*rev1); - source += sizeof(*rev0); + target += sizeof(*dst); + source += sizeof(*src); } } return 0; } -int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) +static int p54_convert_rev1(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) +{ + struct p54_common *priv = dev->priv; + struct p54_pa_curve_data_sample *dst; + struct pda_pa_curve_data_sample_rev1 *src; + size_t cd_len = sizeof(*curve_data) + + (curve_data->points_per_channel*sizeof(*dst) + 2) * + curve_data->channels; + unsigned int i, j; + void *source, *target; + + priv->curve_data = kmalloc(cd_len, GFP_KERNEL); + if (!priv->curve_data) + return -ENOMEM; + + memcpy(priv->curve_data, curve_data, sizeof(*curve_data)); + source = curve_data->data; + target = priv->curve_data->data; + for (i = 0; i < curve_data->channels; i++) { + __le16 *freq = source; + source += sizeof(__le16); + *((__le16 *)target) = *freq; + target += sizeof(__le16); + for (j = 0; j < curve_data->points_per_channel; j++) { + memcpy(target, source, sizeof(*src)); + + target += sizeof(*dst); + source += sizeof(*src); + } + source++; + } + + return 0; +} + +static const char *p54_rf_chips[] = { "NULL", "Indigo?", "Duette", + "Frisbee", "Xbow", "Longbow" }; +static int p54_init_xbow_synth(struct ieee80211_hw *dev); + +static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) { struct p54_common *priv = dev->priv; struct eeprom_pda_wrap *wrap = NULL; @@ -210,6 +319,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) void *tmp; int err; u8 *end = (u8 *)eeprom + len; + DECLARE_MAC_BUF(mac); wrap = (struct eeprom_pda_wrap *) eeprom; entry = (void *)wrap->data + le16_to_cpu(wrap->len); @@ -250,27 +360,32 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) entry->data[1]*sizeof(*priv->output_limit)); priv->output_limit_len = entry->data[1]; break; - case PDR_PRISM_PA_CAL_CURVE_DATA: - if (data_len < sizeof(struct pda_pa_curve_data)) { + case PDR_PRISM_PA_CAL_CURVE_DATA: { + struct pda_pa_curve_data *curve_data = + (struct pda_pa_curve_data *)entry->data; + if (data_len < sizeof(*curve_data)) { err = -EINVAL; goto err; } - if (((struct pda_pa_curve_data *)entry->data)->cal_method_rev) { - priv->curve_data = kmalloc(data_len, GFP_KERNEL); - if (!priv->curve_data) { - err = -ENOMEM; - goto err; - } - - memcpy(priv->curve_data, entry->data, data_len); - } else { - err = p54_convert_rev0_to_rev1(dev, (struct pda_pa_curve_data *)entry->data); - if (err) - goto err; + switch (curve_data->cal_method_rev) { + case 0: + err = p54_convert_rev0(dev, curve_data); + break; + case 1: + err = p54_convert_rev1(dev, curve_data); + break; + default: + printk(KERN_ERR "p54: unknown curve data " + "revision %d\n", + curve_data->cal_method_rev); + err = -ENODEV; + break; } + if (err) + goto err; - break; + } case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); if (!priv->iq_autocal) { @@ -286,7 +401,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) while ((u8 *)tmp < entry->data + data_len) { struct bootrec_exp_if *exp_if = tmp; if (le16_to_cpu(exp_if->if_id) == 0xF) - priv->rxhw = exp_if->variant & cpu_to_le16(0x07); + priv->rxhw = le16_to_cpu(exp_if->variant) & 0x07; tmp += sizeof(struct bootrec_exp_if); } break; @@ -312,6 +427,37 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) goto err; } + switch (priv->rxhw) { + case 4: /* XBow */ + p54_init_xbow_synth(dev); + case 1: /* Indigo? */ + case 2: /* Duette */ + dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz; + case 3: /* Frisbee */ + case 5: /* Longbow */ + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; + break; + default: + printk(KERN_ERR "%s: unsupported RF-Chip\n", + wiphy_name(dev->wiphy)); + err = -EINVAL; + goto err; + } + + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + u8 perm_addr[ETH_ALEN]; + + printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n", + wiphy_name(dev->wiphy)); + random_ether_addr(perm_addr); + SET_IEEE80211_PERM_ADDR(dev, perm_addr); + } + + printk(KERN_INFO "%s: hwaddr %s, MAC:isl38%02x RF:%s\n", + wiphy_name(dev->wiphy), + print_mac(mac, dev->wiphy->perm_addr), + priv->version, p54_rf_chips[priv->rxhw]); + return 0; err: @@ -335,40 +481,55 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) } EXPORT_SYMBOL_GPL(p54_parse_eeprom); -void p54_fill_eeprom_readback(struct p54_control_hdr *hdr) +static int p54_rssi_to_dbm(struct ieee80211_hw *dev, int rssi) { - struct p54_eeprom_lm86 *eeprom_hdr; - - hdr->magic1 = cpu_to_le16(0x8000); - hdr->len = cpu_to_le16(sizeof(*eeprom_hdr) + 0x2000); - hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK); - hdr->retry1 = hdr->retry2 = 0; - eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data; - eeprom_hdr->offset = 0x0; - eeprom_hdr->len = cpu_to_le16(0x2000); + /* TODO: get the rssi_add & rssi_mul data from the eeprom */ + return ((rssi * 0x83) / 64 - 400) / 4; } -EXPORT_SYMBOL_GPL(p54_fill_eeprom_readback); -static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) +static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) { + struct p54_common *priv = dev->priv; struct p54_rx_hdr *hdr = (struct p54_rx_hdr *) skb->data; struct ieee80211_rx_status rx_status = {0}; u16 freq = le16_to_cpu(hdr->freq); + size_t header_len = sizeof(*hdr); + u32 tsf32; + + if (!(hdr->magic & cpu_to_le16(0x0001))) { + if (priv->filter_flags & FIF_FCSFAIL) + rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; + else + return 0; + } - rx_status.signal = hdr->rssi; + rx_status.signal = p54_rssi_to_dbm(dev, hdr->rssi); + rx_status.noise = priv->noise; /* XX correct? */ rx_status.qual = (100 * hdr->rssi) / 127; - rx_status.rate_idx = hdr->rate & 0xf; + rx_status.rate_idx = (dev->conf.channel->band == IEEE80211_BAND_2GHZ ? + hdr->rate : (hdr->rate - 4)) & 0xf; rx_status.freq = freq; - rx_status.band = IEEE80211_BAND_2GHZ; + rx_status.band = dev->conf.channel->band; rx_status.antenna = hdr->antenna; - rx_status.mactime = le64_to_cpu(hdr->timestamp); + + tsf32 = le32_to_cpu(hdr->tsf32); + if (tsf32 < priv->tsf_low32) + priv->tsf_high32++; + rx_status.mactime = ((u64)priv->tsf_high32) << 32 | tsf32; + priv->tsf_low32 = tsf32; + rx_status.flag |= RX_FLAG_TSFT; - skb_pull(skb, sizeof(*hdr)); + if (hdr->magic & cpu_to_le16(0x4000)) + header_len += hdr->align[0]; + + skb_pull(skb, header_len); skb_trim(skb, le16_to_cpu(hdr->len)); ieee80211_rx_irqsafe(dev, skb, &rx_status); + + return -1; } static void inline p54_wake_free_queues(struct ieee80211_hw *dev) @@ -377,7 +538,7 @@ static void inline p54_wake_free_queues(struct ieee80211_hw *dev) int i; for (i = 0; i < dev->queues; i++) - if (priv->tx_stats[i].len < priv->tx_stats[i].limit) + if (priv->tx_stats[i + 4].len < priv->tx_stats[i + 4].limit) ieee80211_wake_queue(dev, i); } @@ -387,11 +548,13 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; struct p54_frame_sent_hdr *payload = (struct p54_frame_sent_hdr *) hdr->data; struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next; - u32 addr = le32_to_cpu(hdr->req_id) - 0x70; + u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom; struct memrecord *range = NULL; u32 freed = 0; u32 last_addr = priv->rx_start; + unsigned long flags; + spin_lock_irqsave(&priv->tx_queue.lock, flags); while (entry != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); range = (void *)info->driver_data; @@ -412,13 +575,15 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) last_addr = range->end_addr; __skb_unlink(entry, &priv->tx_queue); + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + memset(&info->status, 0, sizeof(info->status)); entry_hdr = (struct p54_control_hdr *) entry->data; entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) pad = entry_data->align[0]; - priv->tx_stats[entry_data->hw_queue - 4].len--; + priv->tx_stats[entry_data->hw_queue].len--; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (!(payload->status & 0x01)) info->flags |= IEEE80211_TX_STAT_ACK; @@ -426,21 +591,60 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) info->status.excessive_retries = 1; } info->status.retry_count = payload->retries - 1; - info->status.ack_signal = le16_to_cpu(payload->ack_rssi); + info->status.ack_signal = p54_rssi_to_dbm(dev, + le16_to_cpu(payload->ack_rssi)); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); ieee80211_tx_status_irqsafe(dev, entry); - break; + goto out; } else last_addr = range->end_addr; entry = entry->next; } + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); +out: if (freed >= IEEE80211_MAX_RTS_THRESHOLD + 0x170 + sizeof(struct p54_control_hdr)) p54_wake_free_queues(dev); } -static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) +static void p54_rx_eeprom_readback(struct ieee80211_hw *dev, + struct sk_buff *skb) +{ + struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; + struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; + struct p54_common *priv = dev->priv; + + if (!priv->eeprom) + return ; + + memcpy(priv->eeprom, eeprom->data, le16_to_cpu(eeprom->len)); + + complete(&priv->eeprom_comp); +} + +static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; + struct p54_statistics *stats = (struct p54_statistics *) hdr->data; + u32 tsf32 = le32_to_cpu(stats->tsf32); + + if (tsf32 < priv->tsf_low32) + priv->tsf_high32++; + priv->tsf_low32 = tsf32; + + priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail); + priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success); + priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs); + + priv->noise = p54_rssi_to_dbm(dev, le32_to_cpu(stats->noise)); + complete(&priv->stats_comp); + + mod_timer(&priv->stats_timer, jiffies + 5 * HZ); +} + +static int p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; @@ -450,36 +654,30 @@ static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) break; case P54_CONTROL_TYPE_BBP: break; + case P54_CONTROL_TYPE_STAT_READBACK: + p54_rx_stats(dev, skb); + break; + case P54_CONTROL_TYPE_EEPROM_READBACK: + p54_rx_eeprom_readback(dev, skb); + break; default: printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n", wiphy_name(dev->wiphy), le16_to_cpu(hdr->type)); break; } + + return 0; } /* returns zero if skb can be reused */ int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) { u8 type = le16_to_cpu(*((__le16 *)skb->data)) >> 8; - switch (type) { - case 0x00: - case 0x01: - p54_rx_data(dev, skb); - return -1; - case 0x4d: - /* TODO: do something better... but then again, I've never seen this happen */ - printk(KERN_ERR "%s: Received fault. Probably need to restart hardware now..\n", - wiphy_name(dev->wiphy)); - break; - case 0x80: - p54_rx_control(dev, skb); - break; - default: - printk(KERN_ERR "%s: unknown frame RXed (0x%02x)\n", - wiphy_name(dev->wiphy), type); - break; - } - return 0; + + if (type == 0x80) + return p54_rx_control(dev, skb); + else + return p54_rx_data(dev, skb); } EXPORT_SYMBOL_GPL(p54_rx); @@ -503,7 +701,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, u32 target_addr = priv->rx_start; unsigned long flags; unsigned int left; - len = (len + 0x170 + 3) & ~0x3; /* 0x70 headroom, 0x100 tailroom */ + len = (len + priv->headroom + priv->tailroom + 3) & ~0x3; spin_lock_irqsave(&priv->tx_queue.lock, flags); left = skb_queue_len(&priv->tx_queue); @@ -538,14 +736,74 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, range->start_addr = target_addr; range->end_addr = target_addr + len; __skb_queue_after(&priv->tx_queue, target_skb, skb); - if (largest_hole < IEEE80211_MAX_RTS_THRESHOLD + 0x170 + + if (largest_hole < priv->rx_mtu + priv->headroom + + priv->tailroom + sizeof(struct p54_control_hdr)) ieee80211_stop_queues(dev); } spin_unlock_irqrestore(&priv->tx_queue.lock, flags); - data->req_id = cpu_to_le32(target_addr + 0x70); + data->req_id = cpu_to_le32(target_addr + priv->headroom); +} + +int p54_read_eeprom(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr = NULL; + struct p54_eeprom_lm86 *eeprom_hdr; + size_t eeprom_size = 0x2020, offset = 0, blocksize; + int ret = -ENOMEM; + void *eeprom = NULL; + + hdr = (struct p54_control_hdr *)kzalloc(sizeof(*hdr) + + sizeof(*eeprom_hdr) + EEPROM_READBACK_LEN, GFP_KERNEL); + if (!hdr) + goto free; + + priv->eeprom = kzalloc(EEPROM_READBACK_LEN, GFP_KERNEL); + if (!priv->eeprom) + goto free; + + eeprom = kzalloc(eeprom_size, GFP_KERNEL); + if (!eeprom) + goto free; + + hdr->magic1 = cpu_to_le16(0x8000); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK); + hdr->retry1 = hdr->retry2 = 0; + eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data; + + while (eeprom_size) { + blocksize = min(eeprom_size, (size_t)EEPROM_READBACK_LEN); + hdr->len = cpu_to_le16(blocksize + sizeof(*eeprom_hdr)); + eeprom_hdr->offset = cpu_to_le16(offset); + eeprom_hdr->len = cpu_to_le16(blocksize); + p54_assign_address(dev, NULL, hdr, le16_to_cpu(hdr->len) + + sizeof(*hdr)); + priv->tx(dev, hdr, le16_to_cpu(hdr->len) + sizeof(*hdr), 0); + + if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) { + printk(KERN_ERR "%s: device does not respond!\n", + wiphy_name(dev->wiphy)); + ret = -EBUSY; + goto free; + } + + memcpy(eeprom + offset, priv->eeprom, blocksize); + offset += blocksize; + eeprom_size -= blocksize; + } + + ret = p54_parse_eeprom(dev, eeprom, offset); +free: + kfree(priv->eeprom); + priv->eeprom = NULL; + kfree(hdr); + kfree(eeprom); + + return ret; } +EXPORT_SYMBOL_GPL(p54_read_eeprom); static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { @@ -559,7 +817,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) u8 rate; u8 cts_rate = 0x20; - current_queue = &priv->tx_stats[skb_get_queue_mapping(skb)]; + current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4]; if (unlikely(current_queue->len > current_queue->limit)) return NETDEV_TX_BUSY; current_queue->len++; @@ -601,7 +859,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) txhdr->hw_queue = skb_get_queue_mapping(skb) + 4; txhdr->tx_antenna = (info->antenna_sel_tx == 0) ? 2 : info->antenna_sel_tx - 1; - txhdr->output_power = 0x7f; // HW Maximum + txhdr->output_power = priv->output_power; txhdr->cts_rate = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cts_rate; if (padding) @@ -628,12 +886,12 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) } static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, - const u8 *dst, const u8 *src, u8 antenna, - u32 magic3, u32 magic8, u32 magic9) + const u8 *bssid) { struct p54_common *priv = dev->priv; struct p54_control_hdr *hdr; struct p54_tx_control_filter *filter; + size_t data_len; hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) + priv->tx_hdr_len, GFP_ATOMIC); @@ -644,25 +902,35 @@ static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, filter = (struct p54_tx_control_filter *) hdr->data; hdr->magic1 = cpu_to_le16(0x8001); - hdr->len = cpu_to_le16(sizeof(*filter)); - p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*filter)); hdr->type = cpu_to_le16(P54_CONTROL_TYPE_FILTER_SET); - filter->filter_type = cpu_to_le16(filter_type); - memcpy(filter->dst, dst, ETH_ALEN); - if (!src) - memset(filter->src, ~0, ETH_ALEN); + priv->filter_type = filter->filter_type = cpu_to_le16(filter_type); + memcpy(filter->mac_addr, priv->mac_addr, ETH_ALEN); + if (!bssid) + memset(filter->bssid, ~0, ETH_ALEN); else - memcpy(filter->src, src, ETH_ALEN); - filter->antenna = antenna; - filter->magic3 = cpu_to_le32(magic3); - filter->rx_addr = cpu_to_le32(priv->rx_end); - filter->max_rx = cpu_to_le16(0x0620); /* FIXME: for usb ver 1.. maybe */ - filter->rxhw = priv->rxhw; - filter->magic8 = cpu_to_le16(magic8); - filter->magic9 = cpu_to_le16(magic9); - - priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*filter), 1); + memcpy(filter->bssid, bssid, ETH_ALEN); + + filter->rx_antenna = priv->rx_antenna; + + if (priv->fw_var < 0x500) { + data_len = P54_TX_CONTROL_FILTER_V1_LEN; + filter->v1.basic_rate_mask = cpu_to_le32(0x15F); + filter->v1.rx_addr = cpu_to_le32(priv->rx_end); + filter->v1.max_rx = cpu_to_le16(priv->rx_mtu); + filter->v1.rxhw = cpu_to_le16(priv->rxhw); + filter->v1.wakeup_timer = cpu_to_le16(500); + } else { + data_len = P54_TX_CONTROL_FILTER_V2_LEN; + filter->v2.rx_addr = cpu_to_le32(priv->rx_end); + filter->v2.max_rx = cpu_to_le16(priv->rx_mtu); + filter->v2.rxhw = cpu_to_le16(priv->rxhw); + filter->v2.timer = cpu_to_le16(1000); + } + + hdr->len = cpu_to_le16(data_len); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + data_len); + priv->tx(dev, hdr, sizeof(*hdr) + data_len, 1); return 0; } @@ -672,12 +940,10 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) struct p54_control_hdr *hdr; struct p54_tx_control_channel *chan; unsigned int i; - size_t payload_len = sizeof(*chan) + sizeof(u32)*2 + - sizeof(*chan->curve_data) * - priv->curve_data->points_per_channel; + size_t data_len; void *entry; - hdr = kzalloc(sizeof(*hdr) + payload_len + + hdr = kzalloc(sizeof(*hdr) + sizeof(*chan) + priv->tx_hdr_len, GFP_KERNEL); if (!hdr) return -ENOMEM; @@ -687,12 +953,11 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) chan = (struct p54_tx_control_channel *) hdr->data; hdr->magic1 = cpu_to_le16(0x8001); - hdr->len = cpu_to_le16(sizeof(*chan)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_CHANNEL_CHANGE); - p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + payload_len); - chan->magic1 = cpu_to_le16(0x1); - chan->magic2 = cpu_to_le16(0x0); + chan->flags = cpu_to_le16(0x1); + chan->dwell = cpu_to_le16(0x0); for (i = 0; i < priv->iq_autocal_len; i++) { if (priv->iq_autocal[i].freq != freq) @@ -710,35 +975,51 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) continue; chan->val_barker = 0x38; - chan->val_bpsk = priv->output_limit[i].val_bpsk; - chan->val_qpsk = priv->output_limit[i].val_qpsk; - chan->val_16qam = priv->output_limit[i].val_16qam; - chan->val_64qam = priv->output_limit[i].val_64qam; + chan->val_bpsk = chan->dup_bpsk = + priv->output_limit[i].val_bpsk; + chan->val_qpsk = chan->dup_qpsk = + priv->output_limit[i].val_qpsk; + chan->val_16qam = chan->dup_16qam = + priv->output_limit[i].val_16qam; + chan->val_64qam = chan->dup_64qam = + priv->output_limit[i].val_64qam; break; } if (i == priv->output_limit_len) goto err; - chan->pa_points_per_curve = priv->curve_data->points_per_channel; - entry = priv->curve_data->data; for (i = 0; i < priv->curve_data->channels; i++) { if (*((__le16 *)entry) != freq) { entry += sizeof(__le16); - entry += sizeof(struct pda_pa_curve_data_sample_rev1) * - chan->pa_points_per_curve; + entry += sizeof(struct p54_pa_curve_data_sample) * + priv->curve_data->points_per_channel; continue; } entry += sizeof(__le16); + chan->pa_points_per_curve = + min(priv->curve_data->points_per_channel, (u8) 8); + memcpy(chan->curve_data, entry, sizeof(*chan->curve_data) * chan->pa_points_per_curve); break; } - memcpy(hdr->data + payload_len - 4, &chan->val_bpsk, 4); + if (priv->fw_var < 0x500) { + data_len = P54_TX_CONTROL_CHANNEL_V1_LEN; + chan->v1.rssical_mul = cpu_to_le16(130); + chan->v1.rssical_add = cpu_to_le16(0xfe70); + } else { + data_len = P54_TX_CONTROL_CHANNEL_V2_LEN; + chan->v2.rssical_mul = cpu_to_le16(130); + chan->v2.rssical_add = cpu_to_le16(0xfe70); + chan->v2.basic_rate_mask = cpu_to_le32(0x15f); + } - priv->tx(dev, hdr, sizeof(*hdr) + payload_len, 1); + hdr->len = cpu_to_le16(data_len); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + data_len); + priv->tx(dev, hdr, sizeof(*hdr) + data_len, 1); return 0; err: @@ -846,12 +1127,25 @@ static int p54_start(struct ieee80211_hw *dev) return -ENOMEM; } + if (!priv->cached_stats) { + priv->cached_stats = kzalloc(sizeof(struct p54_statistics) + + priv->tx_hdr_len + sizeof(struct p54_control_hdr), + GFP_KERNEL); + + if (!priv->cached_stats) { + kfree(priv->cached_vdcf); + priv->cached_vdcf = NULL; + return -ENOMEM; + } + } + err = priv->open(dev); if (!err) - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; p54_init_vdcf(dev); + mod_timer(&priv->stats_timer, jiffies + HZ); return err; } @@ -859,10 +1153,13 @@ static void p54_stop(struct ieee80211_hw *dev) { struct p54_common *priv = dev->priv; struct sk_buff *skb; + + del_timer(&priv->stats_timer); while ((skb = skb_dequeue(&priv->tx_queue))) kfree_skb(skb); priv->stop(dev); - priv->mode = IEEE80211_IF_TYPE_INVALID; + priv->tsf_high32 = priv->tsf_low32 = 0; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; } static int p54_add_interface(struct ieee80211_hw *dev, @@ -870,11 +1167,11 @@ static int p54_add_interface(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; - if (priv->mode != IEEE80211_IF_TYPE_MNTR) + if (priv->mode != NL80211_IFTYPE_MONITOR) return -EOPNOTSUPP; switch (conf->type) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->mode = conf->type; break; default: @@ -883,12 +1180,11 @@ static int p54_add_interface(struct ieee80211_hw *dev, memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); - p54_set_filter(dev, 0, priv->mac_addr, NULL, 0, 1, 0, 0xF642); - p54_set_filter(dev, 0, priv->mac_addr, NULL, 1, 0, 0, 0xF642); + p54_set_filter(dev, 0, NULL); switch (conf->type) { - case IEEE80211_IF_TYPE_STA: - p54_set_filter(dev, 1, priv->mac_addr, NULL, 0, 0x15F, 0x1F4, 0); + case NL80211_IFTYPE_STATION: + p54_set_filter(dev, 1, NULL); break; default: BUG(); /* impossible */ @@ -904,9 +1200,9 @@ static void p54_remove_interface(struct ieee80211_hw *dev, struct ieee80211_if_init_conf *conf) { struct p54_common *priv = dev->priv; - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; memset(priv->mac_addr, 0, ETH_ALEN); - p54_set_filter(dev, 0, priv->mac_addr, NULL, 2, 0, 0, 0); + p54_set_filter(dev, 0, NULL); } static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) @@ -915,6 +1211,9 @@ static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) struct p54_common *priv = dev->priv; mutex_lock(&priv->conf_mutex); + priv->rx_antenna = (conf->antenna_sel_rx == 0) ? + 2 : conf->antenna_sel_tx - 1; + priv->output_power = conf->power_level << 2; ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq)); p54_set_vdcf(dev); mutex_unlock(&priv->conf_mutex); @@ -928,8 +1227,7 @@ static int p54_config_interface(struct ieee80211_hw *dev, struct p54_common *priv = dev->priv; mutex_lock(&priv->conf_mutex); - p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642); - p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0); + p54_set_filter(dev, 0, conf->bssid); p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0); memcpy(priv->bssid, conf->bssid, ETH_ALEN); mutex_unlock(&priv->conf_mutex); @@ -943,15 +1241,28 @@ static void p54_configure_filter(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; - *total_flags &= FIF_BCN_PRBRESP_PROMISC; + *total_flags &= FIF_BCN_PRBRESP_PROMISC | + FIF_PROMISC_IN_BSS | + FIF_FCSFAIL; + + priv->filter_flags = *total_flags; if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - p54_set_filter(dev, 0, priv->mac_addr, - NULL, 2, 0, 0, 0); + p54_set_filter(dev, le16_to_cpu(priv->filter_type), + NULL); + else + p54_set_filter(dev, le16_to_cpu(priv->filter_type), + priv->bssid); + } + + if (changed_flags & FIF_PROMISC_IN_BSS) { + if (*total_flags & FIF_PROMISC_IN_BSS) + p54_set_filter(dev, le16_to_cpu(priv->filter_type) | + 0x8, NULL); else - p54_set_filter(dev, 0, priv->mac_addr, - priv->bssid, 2, 0, 0, 0); + p54_set_filter(dev, le16_to_cpu(priv->filter_type) & + ~0x8, priv->bssid); } } @@ -975,10 +1286,67 @@ static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue, return 0; } +static int p54_init_xbow_synth(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_xbow_synth *xbow; + + hdr = kzalloc(sizeof(*hdr) + sizeof(*xbow) + + priv->tx_hdr_len, GFP_KERNEL); + if (!hdr) + return -ENOMEM; + + hdr = (void *)hdr + priv->tx_hdr_len; + hdr->magic1 = cpu_to_le16(0x8001); + hdr->len = cpu_to_le16(sizeof(*xbow)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_XBOW_SYNTH_CFG); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*xbow)); + + xbow = (struct p54_tx_control_xbow_synth *) hdr->data; + xbow->magic1 = cpu_to_le16(0x1); + xbow->magic2 = cpu_to_le16(0x2); + xbow->freq = cpu_to_le16(5390); + + priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*xbow), 1); + + return 0; +} + +static void p54_statistics_timer(unsigned long data) +{ + struct ieee80211_hw *dev = (struct ieee80211_hw *) data; + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_statistics *stats; + + BUG_ON(!priv->cached_stats); + + hdr = (void *)priv->cached_stats + priv->tx_hdr_len; + hdr->magic1 = cpu_to_le16(0x8000); + hdr->len = cpu_to_le16(sizeof(*stats)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_STAT_READBACK); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*stats)); + + priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*stats), 0); +} + static int p54_get_stats(struct ieee80211_hw *dev, struct ieee80211_low_level_stats *stats) { - /* TODO */ + struct p54_common *priv = dev->priv; + + del_timer(&priv->stats_timer); + p54_statistics_timer((unsigned long)dev); + + if (!wait_for_completion_interruptible_timeout(&priv->stats_comp, HZ)) { + printk(KERN_ERR "%s: device does not respond!\n", + wiphy_name(dev->wiphy)); + return -EBUSY; + } + + memcpy(stats, &priv->stats, sizeof(*stats)); + return 0; } @@ -987,7 +1355,7 @@ static int p54_get_tx_stats(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; - memcpy(stats, &priv->tx_stats, sizeof(stats[0]) * dev->queues); + memcpy(stats, &priv->tx_stats[4], sizeof(stats[0]) * dev->queues); return 0; } @@ -1016,22 +1384,32 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) return NULL; priv = dev->priv; - priv->mode = IEEE80211_IF_TYPE_INVALID; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; skb_queue_head_init(&priv->tx_queue); - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */ IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; + + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + dev->channel_change_time = 1000; /* TODO: find actual value */ - dev->max_signal = 127; - priv->tx_stats[0].limit = 5; + priv->tx_stats[0].limit = 1; + priv->tx_stats[1].limit = 1; + priv->tx_stats[2].limit = 1; + priv->tx_stats[3].limit = 1; + priv->tx_stats[4].limit = 5; dev->queues = 1; - + priv->noise = -94; dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 + sizeof(struct p54_tx_control_allocdata); mutex_init(&priv->conf_mutex); + init_completion(&priv->eeprom_comp); + init_completion(&priv->stats_comp); + setup_timer(&priv->stats_timer, p54_statistics_timer, + (unsigned long)dev); return dev; } @@ -1040,6 +1418,7 @@ EXPORT_SYMBOL_GPL(p54_init_common); void p54_free_common(struct ieee80211_hw *dev) { struct p54_common *priv = dev->priv; + kfree(priv->cached_stats); kfree(priv->iq_autocal); kfree(priv->output_limit); kfree(priv->curve_data); diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h index 8db6c0e8e54..2fa994cfcfe 100644 --- a/drivers/net/wireless/p54/p54common.h +++ b/drivers/net/wireless/p54/p54common.h @@ -1,5 +1,5 @@ -#ifndef PRISM54COMMON_H -#define PRISM54COMMON_H +#ifndef P54COMMON_H +#define P54COMMON_H /* * Common code specific definitions for mac80211 Prism54 drivers @@ -18,7 +18,8 @@ struct bootrec { __le32 code; __le32 len; - u32 data[0]; + u32 data[10]; + __le16 rx_mtu; } __attribute__((packed)); struct bootrec_exp_if { @@ -29,6 +30,17 @@ struct bootrec_exp_if { __le16 top_compat; } __attribute__((packed)); +struct bootrec_desc { + __le16 modes; + __le16 flags; + __le32 rx_start; + __le32 rx_end; + u8 headroom; + u8 tailroom; + u8 unimportant[6]; + u8 rates[16]; +} __attribute__((packed)); + #define BR_CODE_MIN 0x80000000 #define BR_CODE_COMPONENT_ID 0x80000001 #define BR_CODE_COMPONENT_VERSION 0x80000002 @@ -39,11 +51,6 @@ struct bootrec_exp_if { #define BR_CODE_END_OF_BRA 0xFF0000FF #define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF -#define FW_FMAC 0x464d4143 -#define FW_LM86 0x4c4d3836 -#define FW_LM87 0x4c4d3837 -#define FW_LM20 0x4c4d3230 - /* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */ struct pda_entry { @@ -89,6 +96,16 @@ struct pda_pa_curve_data_sample_rev1 { u8 data_qpsk; u8 data_16qam; u8 data_64qam; +} __attribute__ ((packed)); + +struct p54_pa_curve_data_sample { + u8 rf_power; + u8 pa_detector; + u8 data_barker; + u8 data_bpsk; + u8 data_qpsk; + u8 data_16qam; + u8 data_64qam; u8 padding; } __attribute__ ((packed)); @@ -169,8 +186,9 @@ struct p54_rx_hdr { u8 rssi; u8 quality; u16 unknown2; - __le64 timestamp; - u8 data[0]; + __le32 tsf32; + __le32 unalloc0; + u8 align[0]; } __attribute__ ((packed)); struct p54_frame_sent_hdr { @@ -198,22 +216,37 @@ struct p54_tx_control_allocdata { struct p54_tx_control_filter { __le16 filter_type; - u8 dst[ETH_ALEN]; - u8 src[ETH_ALEN]; - u8 antenna; - u8 debug; - __le32 magic3; - u8 rates[8]; // FIXME: what's this for? - __le32 rx_addr; - __le16 max_rx; - __le16 rxhw; - __le16 magic8; - __le16 magic9; + u8 mac_addr[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + u8 rx_antenna; + u8 rx_align; + union { + struct { + __le32 basic_rate_mask; + u8 rts_rates[8]; + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 wakeup_timer; + __le16 unalloc0; + } v1 __attribute__ ((packed)); + struct { + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 timer; + __le16 unalloc0; + __le32 unalloc1; + } v2 __attribute__ ((packed)); + } __attribute__ ((packed)); } __attribute__ ((packed)); +#define P54_TX_CONTROL_FILTER_V1_LEN (sizeof(struct p54_tx_control_filter)) +#define P54_TX_CONTROL_FILTER_V2_LEN (sizeof(struct p54_tx_control_filter)-8) + struct p54_tx_control_channel { - __le16 magic1; - __le16 magic2; + __le16 flags; + __le16 dwell; u8 padding1[20]; struct pda_iq_autocal_entry iq_autocal; u8 pa_points_per_curve; @@ -222,10 +255,29 @@ struct p54_tx_control_channel { u8 val_qpsk; u8 val_16qam; u8 val_64qam; - struct pda_pa_curve_data_sample_rev1 curve_data[0]; - /* additional padding/data after curve_data */ + struct p54_pa_curve_data_sample curve_data[8]; + u8 dup_bpsk; + u8 dup_qpsk; + u8 dup_16qam; + u8 dup_64qam; + union { + struct { + __le16 rssical_mul; + __le16 rssical_add; + } v1 __attribute__ ((packed)); + + struct { + __le32 basic_rate_mask; + u8 rts_rates[8]; + __le16 rssical_mul; + __le16 rssical_add; + } v2 __attribute__ ((packed)); + } __attribute__ ((packed)); } __attribute__ ((packed)); +#define P54_TX_CONTROL_CHANNEL_V1_LEN (sizeof(struct p54_tx_control_channel)-12) +#define P54_TX_CONTROL_CHANNEL_V2_LEN (sizeof(struct p54_tx_control_channel)) + struct p54_tx_control_led { __le16 mode; __le16 led_temporary; @@ -250,4 +302,24 @@ struct p54_tx_control_vdcf { __le16 frameburst; } __attribute__ ((packed)); -#endif /* PRISM54COMMON_H */ +struct p54_statistics { + __le32 rx_success; + __le32 rx_bad_fcs; + __le32 rx_abort; + __le32 rx_abort_phy; + __le32 rts_success; + __le32 rts_fail; + __le32 tsf32; + __le32 airtime; + __le32 noise; + __le32 unkn[10]; /* CCE / CCA / RADAR */ +} __attribute__ ((packed)); + +struct p54_tx_control_xbow_synth { + __le16 magic1; + __le16 magic2; + __le16 freq; + u32 padding[5]; +} __attribute__ ((packed)); + +#endif /* P54COMMON_H */ diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 7dd4add4bf4..1c2a02a741a 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -3,6 +3,7 @@ * Linux device driver for PCI based Prism54 * * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2008, Christian Lamparter <chunkeey@web.de> * * Based on the islsm (softmac prism54) driver, which is: * Copyright 2004-2006 Jean-Baptiste Note <jean-baptiste.note@m4x.org>, et al. @@ -71,16 +72,18 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev) P54P_WRITE(ctrl_stat, reg); wmb(); - mdelay(50); - err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev); if (err) { - printk(KERN_ERR "%s (prism54pci): cannot find firmware " + printk(KERN_ERR "%s (p54pci): cannot find firmware " "(isl3886)\n", pci_name(priv->pdev)); return err; } - p54_parse_firmware(dev, fw_entry); + err = p54_parse_firmware(dev, fw_entry); + if (err) { + release_firmware(fw_entry); + return err; + } data = (__le32 *) fw_entry->data; remains = fw_entry->size; @@ -121,162 +124,147 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev) wmb(); udelay(10); + /* wait for the firmware to boot properly */ + mdelay(100); + return 0; } -static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id) +static void p54p_refill_rx_ring(struct ieee80211_hw *dev, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **rx_buf) { - struct p54p_priv *priv = (struct p54p_priv *) dev_id; - __le32 reg; - - reg = P54P_READ(int_ident); - P54P_WRITE(int_ack, reg); + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + u32 limit, idx, i; - if (reg & P54P_READ(int_enable)) - complete(&priv->boot_comp); + idx = le32_to_cpu(ring_control->host_idx[ring_index]); + limit = idx; + limit -= le32_to_cpu(ring_control->device_idx[ring_index]); + limit = ring_limit - limit; - return IRQ_HANDLED; -} + i = idx % ring_limit; + while (limit-- > 1) { + struct p54p_desc *desc = &ring[i]; -static int p54p_read_eeprom(struct ieee80211_hw *dev) -{ - struct p54p_priv *priv = dev->priv; - struct p54p_ring_control *ring_control = priv->ring_control; - int err; - struct p54_control_hdr *hdr; - void *eeprom; - dma_addr_t rx_mapping, tx_mapping; - u16 alen; + if (!desc->host_addr) { + struct sk_buff *skb; + dma_addr_t mapping; + skb = dev_alloc_skb(priv->common.rx_mtu + 32); + if (!skb) + break; - init_completion(&priv->boot_comp); - err = request_irq(priv->pdev->irq, &p54p_simple_interrupt, - IRQF_SHARED, "prism54pci", priv); - if (err) { - printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n", - pci_name(priv->pdev)); - return err; - } + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(skb), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + desc->host_addr = cpu_to_le32(mapping); + desc->device_addr = 0; // FIXME: necessary? + desc->len = cpu_to_le16(priv->common.rx_mtu + 32); + desc->flags = 0; + rx_buf[i] = skb; + } - eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL); - if (!eeprom) { - printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n", - pci_name(priv->pdev)); - err = -ENOMEM; - goto out; + i++; + idx++; + i %= ring_limit; } - memset(ring_control, 0, sizeof(*ring_control)); - P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); - P54P_READ(ring_control_base); - udelay(10); - - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); - P54P_READ(int_enable); - udelay(10); + wmb(); + ring_control->host_idx[ring_index] = cpu_to_le32(idx); +} - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); +static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **rx_buf) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + u32 idx, i; + + i = (*index) % ring_limit; + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); + idx %= ring_limit; + while (i != idx) { + u16 len; + struct sk_buff *skb; + desc = &ring[i]; + len = le16_to_cpu(desc->len); + skb = rx_buf[i]; + + if (!skb) { + i++; + i %= ring_limit; + continue; + } + skb_put(skb, len); + + if (p54_rx(dev, skb)) { + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + rx_buf[i] = NULL; + desc->host_addr = 0; + } else { + skb_trim(skb, 0); + desc->len = cpu_to_le16(priv->common.rx_mtu + 32); + } - if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { - printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n", - pci_name(priv->pdev)); - err = -EINVAL; - goto out; + i++; + i %= ring_limit; } - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); - P54P_READ(int_enable); + p54p_refill_rx_ring(dev, ring_index, ring, ring_limit, rx_buf); +} - hdr = eeprom + 0x2010; - p54_fill_eeprom_readback(hdr); - hdr->req_id = cpu_to_le32(priv->common.rx_start); +/* caller must hold priv->lock */ +static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + void **tx_buf) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + u32 idx, i; - rx_mapping = pci_map_single(priv->pdev, eeprom, - 0x2010, PCI_DMA_FROMDEVICE); - tx_mapping = pci_map_single(priv->pdev, (void *)hdr, - EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); + i = (*index) % ring_limit; + (*index) = idx = le32_to_cpu(ring_control->device_idx[1]); + idx %= ring_limit; - ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping); - ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010); - ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping); - ring_control->tx_data[0].device_addr = hdr->req_id; - ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN); + while (i != idx) { + desc = &ring[i]; + kfree(tx_buf[i]); + tx_buf[i] = NULL; - ring_control->host_idx[2] = cpu_to_le32(1); - ring_control->host_idx[1] = cpu_to_le32(1); + pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), PCI_DMA_TODEVICE); - wmb(); - mdelay(100); - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + desc->host_addr = 0; + desc->device_addr = 0; + desc->len = 0; + desc->flags = 0; - wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); - wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); - - pci_unmap_single(priv->pdev, tx_mapping, - EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); - pci_unmap_single(priv->pdev, rx_mapping, - 0x2010, PCI_DMA_FROMDEVICE); - - alen = le16_to_cpu(ring_control->rx_mgmt[0].len); - if (le32_to_cpu(ring_control->device_idx[2]) != 1 || - alen < 0x10) { - printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n", - pci_name(priv->pdev)); - err = -EINVAL; - goto out; + i++; + i %= ring_limit; } - - p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10); - - out: - kfree(eeprom); - P54P_WRITE(int_enable, cpu_to_le32(0)); - P54P_READ(int_enable); - udelay(10); - free_irq(priv->pdev->irq, priv); - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); - return err; } -static void p54p_refill_rx_ring(struct ieee80211_hw *dev) +static void p54p_rx_tasklet(unsigned long dev_id) { + struct ieee80211_hw *dev = (struct ieee80211_hw *)dev_id; struct p54p_priv *priv = dev->priv; struct p54p_ring_control *ring_control = priv->ring_control; - u32 limit, host_idx, idx; - host_idx = le32_to_cpu(ring_control->host_idx[0]); - limit = host_idx; - limit -= le32_to_cpu(ring_control->device_idx[0]); - limit = ARRAY_SIZE(ring_control->rx_data) - limit; - - idx = host_idx % ARRAY_SIZE(ring_control->rx_data); - while (limit-- > 1) { - struct p54p_desc *desc = &ring_control->rx_data[idx]; - - if (!desc->host_addr) { - struct sk_buff *skb; - dma_addr_t mapping; - skb = dev_alloc_skb(MAX_RX_SIZE); - if (!skb) - break; - - mapping = pci_map_single(priv->pdev, - skb_tail_pointer(skb), - MAX_RX_SIZE, - PCI_DMA_FROMDEVICE); - desc->host_addr = cpu_to_le32(mapping); - desc->device_addr = 0; // FIXME: necessary? - desc->len = cpu_to_le16(MAX_RX_SIZE); - desc->flags = 0; - priv->rx_buf[idx] = skb; - } + p54p_check_rx_ring(dev, &priv->rx_idx_mgmt, 2, ring_control->rx_mgmt, + ARRAY_SIZE(ring_control->rx_mgmt), priv->rx_buf_mgmt); - idx++; - host_idx++; - idx %= ARRAY_SIZE(ring_control->rx_data); - } + p54p_check_rx_ring(dev, &priv->rx_idx_data, 0, ring_control->rx_data, + ARRAY_SIZE(ring_control->rx_data), priv->rx_buf_data); wmb(); - ring_control->host_idx[0] = cpu_to_le32(host_idx); + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); } static irqreturn_t p54p_interrupt(int irq, void *dev_id) @@ -298,65 +286,18 @@ static irqreturn_t p54p_interrupt(int irq, void *dev_id) reg &= P54P_READ(int_enable); if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) { - struct p54p_desc *desc; - u32 idx, i; - i = priv->tx_idx; - i %= ARRAY_SIZE(ring_control->tx_data); - priv->tx_idx = idx = le32_to_cpu(ring_control->device_idx[1]); - idx %= ARRAY_SIZE(ring_control->tx_data); - - while (i != idx) { - desc = &ring_control->tx_data[i]; - if (priv->tx_buf[i]) { - kfree(priv->tx_buf[i]); - priv->tx_buf[i] = NULL; - } - - pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), - le16_to_cpu(desc->len), PCI_DMA_TODEVICE); - - desc->host_addr = 0; - desc->device_addr = 0; - desc->len = 0; - desc->flags = 0; - - i++; - i %= ARRAY_SIZE(ring_control->tx_data); - } - - i = priv->rx_idx; - i %= ARRAY_SIZE(ring_control->rx_data); - priv->rx_idx = idx = le32_to_cpu(ring_control->device_idx[0]); - idx %= ARRAY_SIZE(ring_control->rx_data); - while (i != idx) { - u16 len; - struct sk_buff *skb; - desc = &ring_control->rx_data[i]; - len = le16_to_cpu(desc->len); - skb = priv->rx_buf[i]; + p54p_check_tx_ring(dev, &priv->tx_idx_mgmt, + 3, ring_control->tx_mgmt, + ARRAY_SIZE(ring_control->tx_mgmt), + priv->tx_buf_mgmt); - skb_put(skb, len); + p54p_check_tx_ring(dev, &priv->tx_idx_data, + 1, ring_control->tx_data, + ARRAY_SIZE(ring_control->tx_data), + priv->tx_buf_data); - if (p54_rx(dev, skb)) { - pci_unmap_single(priv->pdev, - le32_to_cpu(desc->host_addr), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + tasklet_schedule(&priv->rx_tasklet); - priv->rx_buf[i] = NULL; - desc->host_addr = 0; - } else { - skb_trim(skb, 0); - desc->len = cpu_to_le16(MAX_RX_SIZE); - } - - i++; - i %= ARRAY_SIZE(ring_control->rx_data); - } - - p54p_refill_rx_ring(dev); - - wmb(); - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); } else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT)) complete(&priv->boot_comp); @@ -392,7 +333,7 @@ static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data, ring_control->host_idx[1] = cpu_to_le32(idx + 1); if (free_on_tx) - priv->tx_buf[i] = data; + priv->tx_buf_data[i] = data; spin_unlock_irqrestore(&priv->lock, flags); @@ -412,7 +353,7 @@ static int p54p_open(struct ieee80211_hw *dev) init_completion(&priv->boot_comp); err = request_irq(priv->pdev->irq, &p54p_interrupt, - IRQF_SHARED, "prism54pci", dev); + IRQF_SHARED, "p54pci", dev); if (err) { printk(KERN_ERR "%s: failed to register IRQ handler\n", wiphy_name(dev->wiphy)); @@ -420,10 +361,19 @@ static int p54p_open(struct ieee80211_hw *dev) } memset(priv->ring_control, 0, sizeof(*priv->ring_control)); - priv->rx_idx = priv->tx_idx = 0; - p54p_refill_rx_ring(dev); + err = p54p_upload_firmware(dev); + if (err) { + free_irq(priv->pdev->irq, dev); + return err; + } + priv->rx_idx_data = priv->tx_idx_data = 0; + priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; + + p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, + ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data); - p54p_upload_firmware(dev); + p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, + ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt); P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); P54P_READ(ring_control_base); @@ -465,6 +415,8 @@ static void p54p_stop(struct ieee80211_hw *dev) unsigned int i; struct p54p_desc *desc; + tasklet_kill(&priv->rx_tasklet); + P54P_WRITE(int_enable, cpu_to_le32(0)); P54P_READ(int_enable); udelay(10); @@ -473,26 +425,53 @@ static void p54p_stop(struct ieee80211_hw *dev) P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); - for (i = 0; i < ARRAY_SIZE(priv->rx_buf); i++) { + for (i = 0; i < ARRAY_SIZE(priv->rx_buf_data); i++) { desc = &ring_control->rx_data[i]; if (desc->host_addr) - pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); - kfree_skb(priv->rx_buf[i]); - priv->rx_buf[i] = NULL; + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf_data[i]); + priv->rx_buf_data[i] = NULL; + } + + for (i = 0; i < ARRAY_SIZE(priv->rx_buf_mgmt); i++) { + desc = &ring_control->rx_mgmt[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf_mgmt[i]); + priv->rx_buf_mgmt[i] = NULL; } - for (i = 0; i < ARRAY_SIZE(priv->tx_buf); i++) { + for (i = 0; i < ARRAY_SIZE(priv->tx_buf_data); i++) { desc = &ring_control->tx_data[i]; if (desc->host_addr) - pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), - le16_to_cpu(desc->len), PCI_DMA_TODEVICE); + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), + PCI_DMA_TODEVICE); - kfree(priv->tx_buf[i]); - priv->tx_buf[i] = NULL; + kfree(priv->tx_buf_data[i]); + priv->tx_buf_data[i] = NULL; } - memset(ring_control, 0, sizeof(ring_control)); + for (i = 0; i < ARRAY_SIZE(priv->tx_buf_mgmt); i++) { + desc = &ring_control->tx_mgmt[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), + PCI_DMA_TODEVICE); + + kfree(priv->tx_buf_mgmt[i]); + priv->tx_buf_mgmt[i] = NULL; + } + + memset(ring_control, 0, sizeof(*ring_control)); } static int __devinit p54p_probe(struct pci_dev *pdev, @@ -506,7 +485,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n", + printk(KERN_ERR "%s (p54pci): Cannot enable new PCI device\n", pci_name(pdev)); return err; } @@ -514,22 +493,22 @@ static int __devinit p54p_probe(struct pci_dev *pdev, mem_addr = pci_resource_start(pdev, 0); mem_len = pci_resource_len(pdev, 0); if (mem_len < sizeof(struct p54p_csr)) { - printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n", + printk(KERN_ERR "%s (p54pci): Too short PCI resources\n", pci_name(pdev)); pci_disable_device(pdev); return err; } - err = pci_request_regions(pdev, "prism54pci"); + err = pci_request_regions(pdev, "p54pci"); if (err) { - printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n", + printk(KERN_ERR "%s (p54pci): Cannot obtain PCI resources\n", pci_name(pdev)); return err; } if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { - printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n", + printk(KERN_ERR "%s (p54pci): No suitable DMA available\n", pci_name(pdev)); goto err_free_reg; } @@ -542,7 +521,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, dev = p54_init_common(sizeof(*priv)); if (!dev) { - printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n", + printk(KERN_ERR "%s (p54pci): ieee80211 alloc failed\n", pci_name(pdev)); err = -ENOMEM; goto err_free_reg; @@ -556,7 +535,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, priv->map = ioremap(mem_addr, mem_len); if (!priv->map) { - printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n", + printk(KERN_ERR "%s (p54pci): Cannot map device memory\n", pci_name(pdev)); err = -EINVAL; // TODO: use a better error code? goto err_free_dev; @@ -565,39 +544,31 @@ static int __devinit p54p_probe(struct pci_dev *pdev, priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control), &priv->ring_control_dma); if (!priv->ring_control) { - printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n", + printk(KERN_ERR "%s (p54pci): Cannot allocate rings\n", pci_name(pdev)); err = -ENOMEM; goto err_iounmap; } - memset(priv->ring_control, 0, sizeof(*priv->ring_control)); - - err = p54p_upload_firmware(dev); - if (err) - goto err_free_desc; - - err = p54p_read_eeprom(dev); - if (err) - goto err_free_desc; - priv->common.open = p54p_open; priv->common.stop = p54p_stop; priv->common.tx = p54p_tx; spin_lock_init(&priv->lock); + tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev); + + p54p_open(dev); + err = p54_read_eeprom(dev); + p54p_stop(dev); + if (err) + goto err_free_desc; err = ieee80211_register_hw(dev); if (err) { - printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n", + printk(KERN_ERR "%s (p54pci): Cannot register netdevice\n", pci_name(pdev)); goto err_free_common; } - printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", - wiphy_name(dev->wiphy), - print_mac(mac, dev->wiphy->perm_addr), - priv->common.version); - return 0; err_free_common: @@ -645,7 +616,7 @@ static int p54p_suspend(struct pci_dev *pdev, pm_message_t state) struct ieee80211_hw *dev = pci_get_drvdata(pdev); struct p54p_priv *priv = dev->priv; - if (priv->common.mode != IEEE80211_IF_TYPE_INVALID) { + if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) { ieee80211_stop_queues(dev); p54p_stop(dev); } @@ -663,7 +634,7 @@ static int p54p_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - if (priv->common.mode != IEEE80211_IF_TYPE_INVALID) { + if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) { p54p_open(dev); ieee80211_wake_queues(dev); } @@ -673,7 +644,7 @@ static int p54p_resume(struct pci_dev *pdev) #endif /* CONFIG_PM */ static struct pci_driver p54p_driver = { - .name = "prism54pci", + .name = "p54pci", .id_table = p54p_table, .probe = p54p_probe, .remove = __devexit_p(p54p_remove), diff --git a/drivers/net/wireless/p54/p54pci.h b/drivers/net/wireless/p54/p54pci.h index 5bedd7af385..4a6778070af 100644 --- a/drivers/net/wireless/p54/p54pci.h +++ b/drivers/net/wireless/p54/p54pci.h @@ -1,5 +1,5 @@ -#ifndef PRISM54PCI_H -#define PRISM54PCI_H +#ifndef P54PCI_H +#define P54PCI_H /* * Defines for PCI based mac80211 Prism54 driver @@ -68,7 +68,7 @@ struct p54p_csr { } __attribute__ ((packed)); /* usb backend only needs the register defines above */ -#ifndef PRISM54USB_H +#ifndef P54USB_H struct p54p_desc { __le32 host_addr; __le32 device_addr; @@ -92,15 +92,19 @@ struct p54p_priv { struct p54_common common; struct pci_dev *pdev; struct p54p_csr __iomem *map; + struct tasklet_struct rx_tasklet; spinlock_t lock; struct p54p_ring_control *ring_control; dma_addr_t ring_control_dma; - u32 rx_idx, tx_idx; - struct sk_buff *rx_buf[8]; - void *tx_buf[32]; + u32 rx_idx_data, tx_idx_data; + u32 rx_idx_mgmt, tx_idx_mgmt; + struct sk_buff *rx_buf_data[8]; + struct sk_buff *rx_buf_mgmt[4]; + void *tx_buf_data[32]; + void *tx_buf_mgmt[4]; struct completion boot_comp; }; -#endif /* PRISM54USB_H */ -#endif /* PRISM54PCI_H */ +#endif /* P54USB_H */ +#endif /* P54PCI_H */ diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index cbaca23a945..1912f5e9a0a 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -91,11 +91,16 @@ static void p54u_rx_cb(struct urb *urb) skb_unlink(skb, &priv->rx_queue); skb_put(skb, urb->actual_length); - if (!priv->hw_type) - skb_pull(skb, sizeof(struct net2280_tx_hdr)); + + if (priv->hw_type == P54U_NET2280) + skb_pull(skb, priv->common.tx_hdr_len); + if (priv->common.fw_interface == FW_LM87) { + skb_pull(skb, 4); + skb_put(skb, 4); + } if (p54_rx(dev, skb)) { - skb = dev_alloc_skb(MAX_RX_SIZE); + skb = dev_alloc_skb(priv->common.rx_mtu + 32); if (unlikely(!skb)) { usb_free_urb(urb); /* TODO check rx queue length and refill *somewhere* */ @@ -109,9 +114,12 @@ static void p54u_rx_cb(struct urb *urb) urb->context = skb; skb_queue_tail(&priv->rx_queue, skb); } else { - if (!priv->hw_type) - skb_push(skb, sizeof(struct net2280_tx_hdr)); - + if (priv->hw_type == P54U_NET2280) + skb_push(skb, priv->common.tx_hdr_len); + if (priv->common.fw_interface == FW_LM87) { + skb_push(skb, 4); + skb_put(skb, 4); + } skb_reset_tail_pointer(skb); skb_trim(skb, 0); if (urb->transfer_buffer != skb_tail_pointer(skb)) { @@ -145,7 +153,7 @@ static int p54u_init_urbs(struct ieee80211_hw *dev) struct p54u_rx_info *info; while (skb_queue_len(&priv->rx_queue) < 32) { - skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL); + skb = __dev_alloc_skb(priv->common.rx_mtu + 32, GFP_KERNEL); if (!skb) break; entry = usb_alloc_urb(0, GFP_KERNEL); @@ -153,7 +161,10 @@ static int p54u_init_urbs(struct ieee80211_hw *dev) kfree_skb(skb); break; } - usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb); + usb_fill_bulk_urb(entry, priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), + skb_tail_pointer(skb), + priv->common.rx_mtu + 32, p54u_rx_cb, skb); info = (struct p54u_rx_info *) skb->cb; info->urb = entry; info->dev = dev; @@ -207,6 +218,42 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data, usb_submit_urb(data_urb, GFP_ATOMIC); } +static __le32 p54u_lm87_chksum(const u32 *data, size_t length) +{ + u32 chk = 0; + + length >>= 2; + while (length--) { + chk ^= *data++; + chk = (chk >> 5) ^ (chk << 3); + } + + return cpu_to_le32(chk); +} + +static void p54u_tx_lm87(struct ieee80211_hw *dev, + struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54u_priv *priv = dev->priv; + struct urb *data_urb; + struct lm87_tx_hdr *hdr = (void *)data - sizeof(*hdr); + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) + return; + + hdr->chksum = p54u_lm87_chksum((u32 *)data, len); + hdr->device_addr = data->req_id; + + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, + len + sizeof(*hdr), free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, + dev); + + usb_submit_urb(data_urb, GFP_ATOMIC); +} + static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data, size_t len, int free_on_tx) { @@ -312,73 +359,6 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, data, len, &alen, 2000); } -static int p54u_read_eeprom(struct ieee80211_hw *dev) -{ - struct p54u_priv *priv = dev->priv; - void *buf; - struct p54_control_hdr *hdr; - int err, alen; - size_t offset = priv->hw_type ? 0x10 : 0x20; - - buf = kmalloc(0x2020, GFP_KERNEL); - if (!buf) { - printk(KERN_ERR "prism54usb: cannot allocate memory for " - "eeprom readback!\n"); - return -ENOMEM; - } - - if (priv->hw_type) { - *((u32 *) buf) = priv->common.rx_start; - err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); - if (err) { - printk(KERN_ERR "prism54usb: addr send failed\n"); - goto fail; - } - } else { - struct net2280_reg_write *reg = buf; - reg->port = cpu_to_le16(NET2280_DEV_U32); - reg->addr = cpu_to_le32(P54U_DEV_BASE); - reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); - err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg)); - if (err) { - printk(KERN_ERR "prism54usb: dev_int send failed\n"); - goto fail; - } - } - - hdr = buf + priv->common.tx_hdr_len; - p54_fill_eeprom_readback(hdr); - hdr->req_id = cpu_to_le32(priv->common.rx_start); - if (priv->common.tx_hdr_len) { - struct net2280_tx_hdr *tx_hdr = buf; - tx_hdr->device_addr = hdr->req_id; - tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN); - } - - /* we can just pretend to send 0x2000 bytes of nothing in the headers */ - err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, - EEPROM_READBACK_LEN + priv->common.tx_hdr_len); - if (err) { - printk(KERN_ERR "prism54usb: eeprom req send failed\n"); - goto fail; - } - - err = usb_bulk_msg(priv->udev, - usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), - buf, 0x2020, &alen, 1000); - if (!err && alen > offset) { - p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset); - } else { - printk(KERN_ERR "prism54usb: eeprom read failed!\n"); - err = -EINVAL; - goto fail; - } - - fail: - kfree(buf); - return err; -} - static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) { static char start_string[] = "~~~~<\r"; @@ -412,7 +392,9 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) goto err_req_fw_failed; } - p54_parse_firmware(dev, fw_entry); + err = p54_parse_firmware(dev, fw_entry); + if (err) + goto err_upload_failed; left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size); strcpy(buf, start_string); @@ -458,7 +440,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); if (err) { - printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + printk(KERN_ERR "p54usb: firmware upload failed!\n"); goto err_upload_failed; } @@ -469,7 +451,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size)); err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); if (err) { - printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + printk(KERN_ERR "p54usb: firmware upload failed!\n"); goto err_upload_failed; } @@ -480,13 +462,13 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) break; if (alen > 5 && !memcmp(buf, "ERROR", 5)) { - printk(KERN_INFO "prism54usb: firmware upload failed!\n"); + printk(KERN_INFO "p54usb: firmware upload failed!\n"); err = -EINVAL; break; } if (time_after(jiffies, timeout)) { - printk(KERN_ERR "prism54usb: firmware boot timed out!\n"); + printk(KERN_ERR "p54usb: firmware boot timed out!\n"); err = -ETIMEDOUT; break; } @@ -498,7 +480,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) buf[1] = '\r'; err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); if (err) { - printk(KERN_ERR "prism54usb: firmware boot failed!\n"); + printk(KERN_ERR "p54usb: firmware boot failed!\n"); goto err_upload_failed; } @@ -549,7 +531,12 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) return err; } - p54_parse_firmware(dev, fw_entry); + err = p54_parse_firmware(dev, fw_entry); + if (err) { + kfree(buf); + release_firmware(fw_entry); + return err; + } #define P54U_WRITE(type, addr, data) \ do {\ @@ -660,7 +647,7 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); if (err) { - printk(KERN_ERR "prism54usb: firmware block upload " + printk(KERN_ERR "p54usb: firmware block upload " "failed\n"); goto fail; } @@ -694,7 +681,7 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) 0x002C | (unsigned long)&devreg->direct_mem_win); if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { - printk(KERN_ERR "prism54usb: firmware DMA transfer " + printk(KERN_ERR "p54usb: firmware DMA transfer " "failed\n"); goto fail; } @@ -802,7 +789,7 @@ static int __devinit p54u_probe(struct usb_interface *intf, dev = p54_init_common(sizeof(*priv)); if (!dev) { - printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n"); + printk(KERN_ERR "p54usb: ieee80211 alloc failed\n"); return -ENOMEM; } @@ -833,49 +820,40 @@ static int __devinit p54u_probe(struct usb_interface *intf, } } priv->common.open = p54u_open; - + priv->common.stop = p54u_stop; if (recognized_pipes < P54U_PIPE_NUMBER) { priv->hw_type = P54U_3887; - priv->common.tx = p54u_tx_3887; + err = p54u_upload_firmware_3887(dev); + if (priv->common.fw_interface == FW_LM87) { + dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); + priv->common.tx = p54u_tx_lm87; + } else + priv->common.tx = p54u_tx_3887; } else { + priv->hw_type = P54U_NET2280; dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); priv->common.tx = p54u_tx_net2280; - } - priv->common.stop = p54u_stop; - - if (priv->hw_type) - err = p54u_upload_firmware_3887(dev); - else err = p54u_upload_firmware_net2280(dev); + } if (err) goto err_free_dev; - err = p54u_read_eeprom(dev); + skb_queue_head_init(&priv->rx_queue); + + p54u_open(dev); + err = p54_read_eeprom(dev); + p54u_stop(dev); if (err) goto err_free_dev; - if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { - u8 perm_addr[ETH_ALEN]; - - printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n"); - random_ether_addr(perm_addr); - SET_IEEE80211_PERM_ADDR(dev, perm_addr); - } - - skb_queue_head_init(&priv->rx_queue); - err = ieee80211_register_hw(dev); if (err) { - printk(KERN_ERR "prism54usb: Cannot register netdevice\n"); + printk(KERN_ERR "p54usb: Cannot register netdevice\n"); goto err_free_dev; } - printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", - wiphy_name(dev->wiphy), - print_mac(mac, dev->wiphy->perm_addr), - priv->common.version); - return 0; err_free_dev: @@ -902,7 +880,7 @@ static void __devexit p54u_disconnect(struct usb_interface *intf) } static struct usb_driver p54u_driver = { - .name = "prism54usb", + .name = "p54usb", .id_table = p54u_table, .probe = p54u_probe, .disconnect = p54u_disconnect, diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h index d1896b396c1..5b8fe91379c 100644 --- a/drivers/net/wireless/p54/p54usb.h +++ b/drivers/net/wireless/p54/p54usb.h @@ -1,5 +1,5 @@ -#ifndef PRISM54USB_H -#define PRISM54USB_H +#ifndef P54USB_H +#define P54USB_H /* * Defines for USB based mac80211 Prism54 driver @@ -72,6 +72,11 @@ struct net2280_tx_hdr { u8 padding[8]; } __attribute__((packed)); +struct lm87_tx_hdr { + __le32 device_addr; + __le32 chksum; +} __attribute__((packed)); + /* Some flags for the isl hardware registers controlling DMA inside the * chip */ #define ISL38XX_DMA_STATUS_DONE 0x00000001 @@ -130,4 +135,4 @@ struct p54u_priv { struct sk_buff_head rx_queue; }; -#endif /* PRISM54USB_H */ +#endif /* P54USB_H */ diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 3d75a7137d3..16e68f4b654 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -71,7 +71,7 @@ prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) { printk(KERN_DEBUG "%s(): Sorry, Repeater mode and Secondary mode " - "are not yet supported by this driver.\n", __FUNCTION__); + "are not yet supported by this driver.\n", __func__); return -EINVAL; } @@ -333,7 +333,7 @@ prism54_set_mode(struct net_device *ndev, struct iw_request_info *info, if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) { printk(KERN_DEBUG "%s: %s() You passed a non-valid init_mode.\n", - priv->ndev->name, __FUNCTION__); + priv->ndev->name, __func__); return -EINVAL; } @@ -1234,7 +1234,7 @@ prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, /* don't know how to disable radio */ printk(KERN_DEBUG "%s: %s() disabling radio is not yet supported.\n", - priv->ndev->name, __FUNCTION__); + priv->ndev->name, __func__); return -ENOTSUPP; } else if (vwrq->fixed) /* currently only fixed value is supported */ @@ -1242,7 +1242,7 @@ prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, else { printk(KERN_DEBUG "%s: %s() auto power will be implemented later.\n", - priv->ndev->name, __FUNCTION__); + priv->ndev->name, __func__); return -ENOTSUPP; } } diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 963960dc30f..44da0d19b5c 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -325,7 +325,7 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->io.IOAddrLines = 5; /* Interrupt setup. For PCMCIA, driver takes what's given */ - p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; p_dev->irq.Handler = &ray_interrupt; diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 00e965b9da7..2b414899dfa 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1627,7 +1627,6 @@ static int rndis_iw_set_encode_ext(struct net_device *dev, static int rndis_iw_set_scan(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { - struct iw_param *param = &wrqu->param; struct usbnet *usbdev = dev->priv; union iwreq_data evt; int ret = -EINVAL; @@ -1635,7 +1634,7 @@ static int rndis_iw_set_scan(struct net_device *dev, devdbg(usbdev, "SIOCSIWSCAN"); - if (param->flags == 0) { + if (wrqu->data.flags == 0) { tmp = ccpu2(1); ret = rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp, sizeof(tmp)); diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index d485a86bba7..f839ce044af 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,5 +1,5 @@ -config RT2X00 - tristate "Ralink driver support" +menuconfig RT2X00 + bool "Ralink driver support" depends on MAC80211 && WLAN_80211 && EXPERIMENTAL ---help--- This will enable the experimental support for the Ralink drivers, @@ -17,31 +17,6 @@ config RT2X00 if RT2X00 -config RT2X00_LIB - tristate - -config RT2X00_LIB_PCI - tristate - select RT2X00_LIB - -config RT2X00_LIB_USB - tristate - select RT2X00_LIB - -config RT2X00_LIB_FIRMWARE - boolean - depends on RT2X00_LIB - select FW_LOADER - -config RT2X00_LIB_RFKILL - boolean - depends on RT2X00_LIB - select RFKILL - -config RT2X00_LIB_LEDS - boolean - depends on RT2X00_LIB && NEW_LEDS - config RT2400PCI tristate "Ralink rt2400 (PCI/PCMCIA) support" depends on PCI @@ -53,23 +28,6 @@ config RT2400PCI When compiled as a module, this driver will be called "rt2400pci.ko". -config RT2400PCI_RFKILL - bool "Ralink rt2400 rfkill support" - depends on RT2400PCI - select RT2X00_LIB_RFKILL - ---help--- - This adds support for integrated rt2400 hardware that features a - hardware button to control the radio state. - This feature depends on the RF switch subsystem rfkill. - -config RT2400PCI_LEDS - bool "Ralink rt2400 leds support" - depends on RT2400PCI && NEW_LEDS - select LEDS_CLASS - select RT2X00_LIB_LEDS - ---help--- - This adds support for led triggers provided my mac80211. - config RT2500PCI tristate "Ralink rt2500 (PCI/PCMCIA) support" depends on PCI @@ -81,28 +39,12 @@ config RT2500PCI When compiled as a module, this driver will be called "rt2500pci.ko". -config RT2500PCI_RFKILL - bool "Ralink rt2500 rfkill support" - depends on RT2500PCI - select RT2X00_LIB_RFKILL - ---help--- - This adds support for integrated rt2500 hardware that features a - hardware button to control the radio state. - This feature depends on the RF switch subsystem rfkill. - -config RT2500PCI_LEDS - bool "Ralink rt2500 leds support" - depends on RT2500PCI && NEW_LEDS - select LEDS_CLASS - select RT2X00_LIB_LEDS - ---help--- - This adds support for led triggers provided my mac80211. - config RT61PCI tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO select CRC_ITU_T select EEPROM_93CX6 ---help--- @@ -111,23 +53,6 @@ config RT61PCI When compiled as a module, this driver will be called "rt61pci.ko". -config RT61PCI_RFKILL - bool "Ralink rt2501/rt61 rfkill support" - depends on RT61PCI - select RT2X00_LIB_RFKILL - ---help--- - This adds support for integrated rt61 hardware that features a - hardware button to control the radio state. - This feature depends on the RF switch subsystem rfkill. - -config RT61PCI_LEDS - bool "Ralink rt2501/rt61 leds support" - depends on RT61PCI && NEW_LEDS - select LEDS_CLASS - select RT2X00_LIB_LEDS - ---help--- - This adds support for led triggers provided my mac80211. - config RT2500USB tristate "Ralink rt2500 (USB) support" depends on USB @@ -138,19 +63,12 @@ config RT2500USB When compiled as a module, this driver will be called "rt2500usb.ko". -config RT2500USB_LEDS - bool "Ralink rt2500 leds support" - depends on RT2500USB && NEW_LEDS - select LEDS_CLASS - select RT2X00_LIB_LEDS - ---help--- - This adds support for led triggers provided my mac80211. - config RT73USB tristate "Ralink rt2501/rt73 (USB) support" depends on USB select RT2X00_LIB_USB select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO select CRC_ITU_T ---help--- This adds support for rt2501 wireless chipset family. @@ -158,13 +76,37 @@ config RT73USB When compiled as a module, this driver will be called "rt73usb.ko". -config RT73USB_LEDS - bool "Ralink rt2501/rt73 leds support" - depends on RT73USB && NEW_LEDS - select LEDS_CLASS - select RT2X00_LIB_LEDS - ---help--- - This adds support for led triggers provided my mac80211. +config RT2X00_LIB_PCI + tristate + select RT2X00_LIB + +config RT2X00_LIB_USB + tristate + select RT2X00_LIB + +config RT2X00_LIB + tristate + +config RT2X00_LIB_FIRMWARE + boolean + select FW_LOADER + +config RT2X00_LIB_CRYPTO + boolean + +config RT2X00_LIB_RFKILL + boolean + default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n) + +comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00" + depends on RT2X00_LIB=y && RFKILL=m + +config RT2X00_LIB_LEDS + boolean + default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) + +comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" + depends on RT2X00_LIB=y && LEDS_CLASS=m config RT2X00_LIB_DEBUGFS bool "Ralink debugfs support" diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 1087dbcf1a0..917cb4f3b03 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -3,6 +3,7 @@ rt2x00lib-y += rt2x00mac.o rt2x00lib-y += rt2x00config.o rt2x00lib-y += rt2x00queue.o rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o +rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 4c0538d6099..08cb9eec16a 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -231,7 +231,7 @@ static const struct rt2x00debug rt2400pci_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT2400PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -241,9 +241,9 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) } #else #define rt2400pci_rfkill_poll NULL -#endif /* CONFIG_RT2400PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ -#ifdef CONFIG_RT2400PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS static void rt2400pci_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -288,7 +288,7 @@ static void rt2400pci_init_led(struct rt2x00_dev *rt2x00dev, led->led_dev.blink_set = rt2400pci_blink_set; led->flags = LED_INITIALIZED; } -#endif /* CONFIG_RT2400PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. @@ -1241,7 +1241,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) if (!reg) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -1374,22 +1374,22 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led mode, for correct led behaviour. */ -#ifdef CONFIG_RT2400PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); if (value == LED_MODE_TXRX_ACTIVITY) rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2400PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Detect if this device has an hardware controlled radio. */ -#ifdef CONFIG_RT2400PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT2400PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ /* * Check if the BBP tuning should be enabled. @@ -1404,7 +1404,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * RF value list for RF2420 & RF2421 * Supports: 2.4 GHz */ -static const struct rf_channel rf_vals_bg[] = { +static const struct rf_channel rf_vals_b[] = { { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 }, { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 }, { 3, 0x00022058, 0x000c2002, 0x00000101, 0 }, @@ -1421,10 +1421,11 @@ static const struct rf_channel rf_vals_bg[] = { { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, }; -static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1440,23 +1441,28 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - spec->num_channels = ARRAY_SIZE(rf_vals_bg); - spec->channels = rf_vals_bg; + spec->num_channels = ARRAY_SIZE(rf_vals_b); + spec->channels = rf_vals_b; + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + return 0; } static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1477,7 +1483,9 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt2400pci_probe_hw_mode(rt2x00dev); + retval = rt2400pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires the atim queue and DMA-mapped skbs. diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index bc556425822..bbff381ce39 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -938,19 +938,13 @@ #define MAX_TXPOWER 62 #define DEFAULT_TXPOWER 39 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - (__txpower) += MIN_TXPOWER; \ - ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \ - (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \ -}) +#define __CLAMP_TX(__txpower) \ + clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER) + +#define TXPOWER_FROM_DEV(__txpower) \ + ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER) + +#define TXPOWER_TO_DEV(__txpower) \ + MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER) #endif /* RT2400PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 181a146b476..ef42cc04a2d 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -231,7 +231,7 @@ static const struct rt2x00debug rt2500pci_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT2500PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -241,9 +241,9 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) } #else #define rt2500pci_rfkill_poll NULL -#endif /* CONFIG_RT2500PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ -#ifdef CONFIG_RT2500PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS static void rt2500pci_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -288,7 +288,7 @@ static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev, led->led_dev.blink_set = rt2500pci_blink_set; led->flags = LED_INITIALIZED; } -#endif /* CONFIG_RT2500PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. @@ -1316,6 +1316,8 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; } @@ -1377,7 +1379,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) if (!reg) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -1531,22 +1533,22 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led mode, for correct led behaviour. */ -#ifdef CONFIG_RT2500PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); if (value == LED_MODE_TXRX_ACTIVITY) rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2500PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Detect if this device has an hardware controlled radio. */ -#ifdef CONFIG_RT2500PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT2500PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ /* * Check if the BBP tuning should be enabled. @@ -1721,10 +1723,11 @@ static const struct rf_channel rf_vals_5222[] = { { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, }; -static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1741,20 +1744,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); @@ -1776,6 +1769,26 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = DEFAULT_TXPOWER; + } + + return 0; } static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1796,7 +1809,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt2500pci_probe_hw_mode(rt2x00dev); + retval = rt2500pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires the atim queue and DMA-mapped skbs. diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 42f376929ea..8c26bef6cf4 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -1223,17 +1223,10 @@ #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index cd5af656932..d3bf7bba611 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -288,7 +288,7 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT2500USB_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS static void rt2500usb_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -333,7 +333,7 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev, led->led_dev.blink_set = rt2500usb_blink_set; led->flags = LED_INITIALIZED; } -#endif /* CONFIG_RT2500USB_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. @@ -384,7 +384,7 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev, rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); rt2x00_set_field16(®, TXRX_CSR20_OFFSET, bcn_preload >> 6); rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, - 2 * (conf->type != IEEE80211_IF_TYPE_STA)); + 2 * (conf->type != NL80211_IFTYPE_STATION)); rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); /* @@ -1114,8 +1114,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, - skb->len - skbdesc->desc_len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1134,7 +1133,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) int pipe = usb_sndbulkpipe(usb_dev, 1); int length; u16 reg; - u32 word, len; /* * Add the descriptor in front of the skb. @@ -1144,17 +1142,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* - * Adjust the beacon databyte count. The current number is - * calculated before this function gets called, but falsely - * assumes that the descriptor was already present in the SKB. - */ - rt2x00_desc_read(skbdesc->desc, 0, &word); - len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); - len += skbdesc->desc_len; - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); - rt2x00_desc_write(skbdesc->desc, 0, word); - - /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1280,6 +1267,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; @@ -1297,7 +1286,7 @@ static void rt2500usb_beacondone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; - if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) return; /* @@ -1484,14 +1473,14 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led mode, for correct led behaviour. */ -#ifdef CONFIG_RT2500USB_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); if (value == LED_MODE_TXRX_ACTIVITY) rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2500USB_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Check if the BBP tuning should be disabled. @@ -1665,10 +1654,11 @@ static const struct rf_channel rf_vals_5222[] = { { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, }; -static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1687,20 +1677,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); @@ -1722,6 +1702,26 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = DEFAULT_TXPOWER; + } + + return 0; } static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1742,7 +1742,9 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt2500usb_probe_hw_mode(rt2x00dev); + retval = rt2500usb_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires the atim queue diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 4769ffeb4cc..89e5ed24e4f 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -825,17 +825,10 @@ #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 8b10ea41b20..1359a376840 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.1.8" +#define DRV_VERSION "2.2.1" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -53,11 +53,11 @@ */ #define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \ printk(__kernlvl "%s -> %s: %s - " __msg, \ - wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args) + wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args) #define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \ printk(__kernlvl "%s -> %s: %s - " __msg, \ - KBUILD_MODNAME, __FUNCTION__, __lvl, ##__args) + KBUILD_MODNAME, __func__, __lvl, ##__args) #ifdef CONFIG_RT2X00_DEBUG #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \ @@ -144,6 +144,17 @@ struct rf_channel { }; /* + * Channel information structure + */ +struct channel_info { + unsigned int flags; +#define GEOGRAPHY_ALLOWED 0x00000001 + + short tx_power1; + short tx_power2; +}; + +/* * Antenna setup values. */ struct antenna_setup { @@ -394,10 +405,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) * @num_channels: Number of supported channels. This is used as array size * for @tx_power_a, @tx_power_bg and @channels. * @channels: Device/chipset specific channel values (See &struct rf_channel). - * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL). - * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL). - * @tx_power_default: Default TX power value to use when either - * @tx_power_a or @tx_power_bg is missing. + * @channels_info: Additional information for channels (See &struct channel_info). */ struct hw_mode_spec { unsigned int supported_bands; @@ -410,10 +418,7 @@ struct hw_mode_spec { unsigned int num_channels; const struct rf_channel *channels; - - const u8 *tx_power_a; - const u8 *tx_power_bg; - u8 tx_power_default; + const struct channel_info *channels_info; }; /* @@ -425,7 +430,9 @@ struct hw_mode_spec { */ struct rt2x00lib_conf { struct ieee80211_conf *conf; + struct rf_channel rf; + struct channel_info channel; struct antenna_setup ant; @@ -452,6 +459,23 @@ struct rt2x00lib_erp { }; /* + * Configuration structure for hardware encryption. + */ +struct rt2x00lib_crypto { + enum cipher cipher; + + enum set_key_cmd cmd; + const u8 *address; + + u32 bssidx; + u32 aid; + + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +}; + +/* * Configuration structure wrapper around the * rt2x00 interface configuration handler. */ @@ -459,7 +483,7 @@ struct rt2x00intf_conf { /* * Interface type */ - enum ieee80211_if_types type; + enum nl80211_iftype type; /* * TSF sync value, this is dependant on the operation type. @@ -547,6 +571,12 @@ struct rt2x00lib_ops { /* * Configuration handlers. */ + int (*config_shared_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); + int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); void (*config_filter) (struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags); void (*config_intf) (struct rt2x00_dev *rt2x00dev, @@ -599,17 +629,16 @@ enum rt2x00_flags { /* * Device state flags */ - DEVICE_PRESENT, - DEVICE_REGISTERED_HW, - DEVICE_INITIALIZED, - DEVICE_STARTED, - DEVICE_STARTED_SUSPEND, - DEVICE_ENABLED_RADIO, - DEVICE_DISABLED_RADIO_HW, - DEVICE_DIRTY_CONFIG, + DEVICE_STATE_PRESENT, + DEVICE_STATE_REGISTERED_HW, + DEVICE_STATE_INITIALIZED, + DEVICE_STATE_STARTED, + DEVICE_STATE_STARTED_SUSPEND, + DEVICE_STATE_ENABLED_RADIO, + DEVICE_STATE_DISABLED_RADIO_HW, /* - * Driver features + * Driver requirements */ DRIVER_REQUIRE_FIRMWARE, DRIVER_REQUIRE_BEACON_GUARD, @@ -618,9 +647,14 @@ enum rt2x00_flags { DRIVER_REQUIRE_DMA, /* - * Driver configuration + * Driver features */ CONFIG_SUPPORT_HW_BUTTON, + CONFIG_SUPPORT_HW_CRYPTO, + + /* + * Driver configuration + */ CONFIG_FRAME_TYPE, CONFIG_RF_SEQUENCE, CONFIG_EXTERNAL_LNA_A, @@ -769,6 +803,11 @@ struct rt2x00_dev { u32 *rf; /* + * LNA gain + */ + short lna_gain; + + /* * USB Max frame size (for rt2500usb & rt73usb). */ u16 usb_maxpacket; @@ -966,6 +1005,13 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, int mc_count, struct dev_addr_list *mc_list); +#ifdef CONFIG_RT2X00_LIB_CRYPTO +int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key); +#else +#define rt2x00mac_set_key NULL +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index d134c3be539..4d5e87b015a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -31,7 +31,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, - enum ieee80211_if_types type, + enum nl80211_iftype type, u8 *mac, u8 *bssid) { struct rt2x00intf_conf conf; @@ -40,11 +40,11 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, conf.type = type; switch (type) { - case IEEE80211_IF_TYPE_IBSS: - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: conf.sync = TSF_SYNC_BEACON; break; - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: conf.sync = TSF_SYNC_INFRA; break; default: @@ -121,7 +121,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * Antenna setup changes require the RX to be disabled, * else the changes will be ignored by the device. */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK); /* @@ -136,7 +136,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00dev->link.ant.active.rx = libconf.ant.rx; rt2x00dev->link.ant.active.tx = libconf.ant.tx; - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } @@ -245,6 +245,10 @@ config: memcpy(&libconf.rf, &rt2x00dev->spec.channels[conf->channel->hw_value], sizeof(libconf.rf)); + + memcpy(&libconf.channel, + &rt2x00dev->spec.channels_info[conf->channel->hw_value], + sizeof(libconf.channel)); } if (flags & CONFIG_UPDATE_ANTENNA) { diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c new file mode 100644 index 00000000000..5a858e5106c --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -0,0 +1,215 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 crypto specific routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) +{ + switch (key->alg) { + case ALG_WEP: + if (key->keylen == LEN_WEP40) + return CIPHER_WEP64; + else + return CIPHER_WEP128; + case ALG_TKIP: + return CIPHER_TKIP; + case ALG_CCMP: + return CIPHER_AES; + default: + return CIPHER_NONE; + } +} + +unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +{ + struct ieee80211_key_conf *key = tx_info->control.hw_key; + unsigned int overhead = 0; + + /* + * Extend frame length to include IV/EIV/ICV/MMIC, + * note that these lengths should only be added when + * mac80211 does not generate it. + */ + overhead += key->icv_len; + + if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + overhead += key->iv_len; + + if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) { + if (key->alg == ALG_TKIP) + overhead += 8; + } + + return overhead; +} + +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + + if (unlikely(!iv_len)) + return; + + /* Copy IV/EIV data */ + if (iv_len >= 4) + memcpy(&skbdesc->iv, skb->data + header_length, 4); + if (iv_len >= 8) + memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4); + + /* Move ieee80211 header */ + memmove(skb->data + iv_len, skb->data, header_length); + + /* Pull buffer to correct size */ + skb_pull(skb, iv_len); + + /* IV/EIV data has officially be stripped */ + skbdesc->flags |= FRAME_DESC_IV_STRIPPED; +} + +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + const unsigned int iv_len = + ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4); + + if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED)) + return; + + skb_push(skb, iv_len); + + /* Move ieee80211 header */ + memmove(skb->data, skb->data + iv_len, header_length); + + /* Copy IV/EIV data */ + if (iv_len >= 4) + memcpy(skb->data + header_length, &skbdesc->iv, 4); + if (iv_len >= 8) + memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4); + + /* IV/EIV data has returned into the frame */ + skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED; +} + +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc) +{ + unsigned int payload_len = rxdesc->size - header_length; + unsigned int iv_len; + unsigned int icv_len; + unsigned int transfer = 0; + + /* + * WEP64/WEP128: Provides IV & ICV + * TKIP: Provides IV/EIV & ICV + * AES: Provies IV/EIV & ICV + */ + switch (rxdesc->cipher) { + case CIPHER_WEP64: + case CIPHER_WEP128: + iv_len = 4; + icv_len = 4; + break; + case CIPHER_TKIP: + iv_len = 8; + icv_len = 4; + break; + case CIPHER_AES: + iv_len = 8; + icv_len = 8; + break; + default: + /* Unsupport type */ + return; + } + + /* + * Make room for new data, note that we increase both + * headsize and tailsize when required. The tailsize is + * only needed when ICV data needs to be inserted and + * the padding is smaller then the ICV data. + * When alignment requirements is greater then the + * ICV data we must trim the skb to the correct size + * because we need to remove the extra bytes. + */ + skb_push(skb, iv_len + align); + if (align < icv_len) + skb_put(skb, icv_len - align); + else if (align > icv_len) + skb_trim(skb, rxdesc->size + iv_len + icv_len); + + /* Move ieee80211 header */ + memmove(skb->data + transfer, + skb->data + transfer + iv_len + align, + header_length); + transfer += header_length; + + /* Copy IV data */ + if (iv_len >= 4) { + memcpy(skb->data + transfer, &rxdesc->iv, 4); + transfer += 4; + } + + /* Copy EIV data */ + if (iv_len >= 8) { + memcpy(skb->data + transfer, &rxdesc->eiv, 4); + transfer += 4; + } + + /* Move payload */ + if (align) { + memmove(skb->data + transfer, + skb->data + transfer + align, + payload_len); + } + + /* + * NOTE: Always count the payload as transfered, + * even when alignment was set to zero. This is required + * for determining the correct offset for the ICV data. + */ + transfer += payload_len; + + /* Copy ICV data */ + if (icv_len >= 4) { + memcpy(skb->data + transfer, &rxdesc->icv, 4); + /* + * AES appends 8 bytes, we can't fill the upper + * 4 bytes, but mac80211 doesn't care about what + * we provide here anyway and strips it immediately. + */ + transfer += icv_len; + } + + /* IV/EIV/ICV has been inserted into frame */ + rxdesc->size = transfer; + rxdesc->flags &= ~RX_FLAG_IV_STRIPPED; +} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 6bee1d611bb..5cf4c859e39 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -35,6 +35,13 @@ #define MAX_LINE_LENGTH 64 +struct rt2x00debug_crypto { + unsigned long success; + unsigned long icv_error; + unsigned long mic_error; + unsigned long key_error; +}; + struct rt2x00debug_intf { /* * Pointer to driver structure where @@ -63,6 +70,7 @@ struct rt2x00debug_intf { * - queue folder * - frame dump file * - queue stats file + * - crypto stats file */ struct dentry *driver_folder; struct dentry *driver_entry; @@ -80,6 +88,7 @@ struct rt2x00debug_intf { struct dentry *queue_folder; struct dentry *queue_frame_dump_entry; struct dentry *queue_stats_entry; + struct dentry *crypto_stats_entry; /* * The frame dump file only allows a single reader, @@ -98,6 +107,12 @@ struct rt2x00debug_intf { wait_queue_head_t frame_dump_waitqueue; /* + * HW crypto statistics. + * All statistics are stored seperately per cipher type. + */ + struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; + + /* * Driver and chipset files will use a data buffer * that has been created in advance. This will simplify * the code since we can use the debugfs functions. @@ -114,6 +129,25 @@ struct rt2x00debug_intf { unsigned int offset_rf; }; +void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, enum rx_crypto status) +{ + struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; + + if (cipher == CIPHER_TKIP_NO_MIC) + cipher = CIPHER_TKIP; + if (cipher == CIPHER_NONE || cipher > CIPHER_MAX) + return; + + /* Remove CIPHER_NONE index */ + cipher--; + + intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS); + intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV); + intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC); + intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY); +} + void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb) { @@ -327,6 +361,59 @@ static const struct file_operations rt2x00debug_fop_queue_stats = { .release = rt2x00debug_file_release, }; +#ifdef CONFIG_RT2X00_LIB_CRYPTO +static ssize_t rt2x00debug_read_crypto_stats(struct file *file, + char __user *buf, + size_t length, + loff_t *offset) +{ + struct rt2x00debug_intf *intf = file->private_data; + char *name[] = { "WEP64", "WEP128", "TKIP", "AES" }; + char *data; + char *temp; + size_t size; + unsigned int i; + + if (*offset) + return 0; + + data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL); + if (!data) + return -ENOMEM; + + temp = data; + temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n"); + + for (i = 0; i < CIPHER_MAX; i++) { + temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i], + intf->crypto_stats[i].success, + intf->crypto_stats[i].icv_error, + intf->crypto_stats[i].mic_error, + intf->crypto_stats[i].key_error); + } + + size = strlen(data); + size = min(size, length); + + if (copy_to_user(buf, data, size)) { + kfree(data); + return -EFAULT; + } + + kfree(data); + + *offset += size; + return size; +} + +static const struct file_operations rt2x00debug_fop_crypto_stats = { + .owner = THIS_MODULE, + .read = rt2x00debug_read_crypto_stats, + .open = rt2x00debug_file_open, + .release = rt2x00debug_file_release, +}; +#endif + #define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ static ssize_t rt2x00debug_read_##__name(struct file *file, \ char __user *buf, \ @@ -569,6 +656,13 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) debugfs_create_file("queue", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_stats); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + intf->crypto_stats_entry = + debugfs_create_file("crypto", S_IRUGO, intf->queue_folder, + intf, &rt2x00debug_fop_crypto_stats); +#endif + return; exit: @@ -587,6 +681,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) skb_queue_purge(&intf->frame_dump_skbqueue); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + debugfs_remove(intf->crypto_stats_entry); +#endif debugfs_remove(intf->queue_stats_entry); debugfs_remove(intf->queue_frame_dump_entry); debugfs_remove(intf->queue_folder); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index f42283ad7b0..86840e3585e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -34,7 +34,7 @@ */ void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; /* @@ -94,8 +94,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) * Don't enable the radio twice. * And check if the hardware button has been disabled. */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || + test_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags)) return 0; /* @@ -117,7 +117,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00leds_led_radio(rt2x00dev, true); rt2x00led_led_activity(rt2x00dev, true); - __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); + set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); /* * Enable RX. @@ -134,7 +134,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) { - if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; /* @@ -354,7 +354,7 @@ static void rt2x00lib_link_tuner(struct work_struct *work) * When the radio is shutting down we should * immediately cease all link tuning. */ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; /* @@ -431,7 +431,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, * note that in the spinlock protected area above the delayed_flags * have been cleared correctly. */ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; if (delayed_flags & DELAYED_UPDATE_BEACON) @@ -467,8 +467,8 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac, struct rt2x00_dev *rt2x00dev = data; struct rt2x00_intf *intf = vif_to_intf(vif); - if (vif->type != IEEE80211_IF_TYPE_AP && - vif->type != IEEE80211_IF_TYPE_IBSS) + if (vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_ADHOC) return; /* @@ -484,7 +484,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac, void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw, @@ -508,6 +508,15 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00queue_unmap_skb(rt2x00dev, entry->skb); /* + * If the IV/EIV data was stripped from the frame before it was + * passed to the hardware, we should now reinsert it again because + * mac80211 will expect the the same data to be present it the + * frame as it was passed to us. + */ + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + rt2x00crypto_tx_insert_iv(entry->skb); + + /* * Send frame to debugfs immediately, after this call is completed * we are going to overwrite the skb->cb array. */ @@ -563,7 +572,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry); - __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); /* @@ -585,7 +594,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; - unsigned int header_size; + unsigned int header_length; unsigned int align; unsigned int i; int idx = -1; @@ -613,10 +622,19 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ - header_size = ieee80211_get_hdrlen_from_skb(entry->skb); - align = ((unsigned long)(entry->skb->data + header_size)) & 3; + header_length = ieee80211_get_hdrlen_from_skb(entry->skb); + align = ((unsigned long)(entry->skb->data + header_length)) & 3; - if (align) { + /* + * Hardware might have stripped the IV/EIV/ICV data, + * in that case it is possible that the data was + * provided seperately (through hardware descriptor) + * in which case we should reinsert the data into the frame. + */ + if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) { + rt2x00crypto_rx_insert_iv(entry->skb, align, + header_length, &rxdesc); + } else if (align) { skb_push(entry->skb, align); /* Move entire frame in 1 command */ memmove(entry->skb->data, entry->skb->data + align, @@ -635,7 +653,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && (rate->plcp == rxdesc.signal)) || - (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) && (rate->bitrate == rxdesc.signal))) { idx = i; break; @@ -657,6 +675,10 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, (rxdesc.dev_flags & RXDONE_MY_BSS)) rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); + rt2x00debug_update_crypto(rt2x00dev, + rxdesc.cipher, + rxdesc.cipher_status); + rt2x00dev->link.qual.rx_success++; rx_status->mactime = rxdesc.timestamp; @@ -796,7 +818,6 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, struct ieee80211_rate *rates; unsigned int num_rates; unsigned int i; - unsigned char tx_power; num_rates = 0; if (spec->supported_rates & SUPPORT_RATE_CCK) @@ -822,20 +843,9 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, * Initialize Channel list. */ for (i = 0; i < spec->num_channels; i++) { - if (spec->channels[i].channel <= 14) { - if (spec->tx_power_bg) - tx_power = spec->tx_power_bg[i]; - else - tx_power = spec->tx_power_default; - } else { - if (spec->tx_power_a) - tx_power = spec->tx_power_a[i]; - else - tx_power = spec->tx_power_default; - } - rt2x00lib_channel(&channels[i], - spec->channels[i].channel, tx_power, i); + spec->channels[i].channel, + spec->channels_info[i].tx_power1, i); } /* @@ -878,7 +888,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) { - if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) ieee80211_unregister_hw(rt2x00dev->hw); if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) { @@ -887,6 +897,8 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL; rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL; } + + kfree(rt2x00dev->spec.channels_info); } static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -894,6 +906,9 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) struct hw_mode_spec *spec = &rt2x00dev->spec; int status; + if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) + return 0; + /* * Initialize HW modes. */ @@ -915,7 +930,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) return status; } - __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags); + set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags); return 0; } @@ -925,7 +940,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) */ static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) { - if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) return; /* @@ -948,7 +963,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) { int status; - if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) return 0; /* @@ -967,7 +982,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) return status; } - __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags); + set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags); /* * Register the extra components. @@ -981,7 +996,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) { int retval; - if (test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return 0; /* @@ -999,28 +1014,18 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - /* - * Enable radio. - */ - retval = rt2x00lib_enable_radio(rt2x00dev); - if (retval) { - rt2x00lib_uninitialize(rt2x00dev); - return retval; - } - rt2x00dev->intf_ap_count = 0; rt2x00dev->intf_sta_count = 0; rt2x00dev->intf_associated = 0; - __set_bit(DEVICE_STARTED, &rt2x00dev->flags); - __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags); return 0; } void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return; /* @@ -1032,8 +1037,6 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) rt2x00dev->intf_ap_count = 0; rt2x00dev->intf_sta_count = 0; rt2x00dev->intf_associated = 0; - - __clear_bit(DEVICE_STARTED, &rt2x00dev->flags); } /* @@ -1049,6 +1052,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf); + rt2x00dev->hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + /* * Let the driver probe the device to detect the capabilities. */ @@ -1088,7 +1096,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00rfkill_allocate(rt2x00dev); rt2x00debug_register(rt2x00dev); - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); return 0; @@ -1101,7 +1109,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) { - __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); /* * Disable radio. @@ -1146,14 +1154,15 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) int retval; NOTICE(rt2x00dev, "Going to sleep.\n"); - __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); /* * Only continue if mac80211 has open interfaces. */ - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || + !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) goto exit; - __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags); + + set_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags); /* * Disable radio. @@ -1203,8 +1212,8 @@ static void rt2x00lib_resume_intf(void *data, u8 *mac, /* * Master or Ad-hoc mode require a new beacon update. */ - if (vif->type == IEEE80211_IF_TYPE_AP || - vif->type == IEEE80211_IF_TYPE_IBSS) + if (vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC) intf->delayed_flags |= DELAYED_UPDATE_BEACON; spin_unlock(&intf->lock); @@ -1225,7 +1234,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Only continue if mac80211 had open interfaces. */ - if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags)) return 0; /* @@ -1252,7 +1261,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * We are ready again to receive requests from mac80211. */ - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); /* * It is possible that during that mac80211 has attempted @@ -1272,7 +1281,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) return 0; exit: - rt2x00lib_disable_radio(rt2x00dev); + rt2x00lib_stop(rt2x00dev); rt2x00lib_uninitialize(rt2x00dev); rt2x00debug_deregister(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index c5fb3a72cf3..797eb619aa0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -88,7 +88,7 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev); */ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, - enum ieee80211_if_types type, + enum nl80211_iftype type, u8 *mac, u8 *bssid); void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, @@ -181,6 +181,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb); +void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, enum rx_crypto status); #else static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) { @@ -195,9 +197,54 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { } + +static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, + enum rx_crypto status) +{ +} #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ /* + * Crypto handlers. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO +enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); +unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info); +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc); +#else +static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) +{ + return CIPHER_NONE; +} + +static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +{ + return 0; +} + +static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, + unsigned int iv_len) +{ +} + +static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +{ +} + +static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, + unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc) +{ +} +#endif + +/* * RFkill handlers. */ #ifdef CONFIG_RT2X00_LIB_RFKILL diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index d0650738863..2c6cc5c374f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -36,21 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb); struct ieee80211_tx_info *rts_info; struct sk_buff *skb; - int size; + unsigned int data_length; + int retval = 0; if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) - size = sizeof(struct ieee80211_cts); + data_length = sizeof(struct ieee80211_cts); else - size = sizeof(struct ieee80211_rts); + data_length = sizeof(struct ieee80211_rts); - skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom); - if (!skb) { + skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom); + if (unlikely(!skb)) { WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n"); - return NETDEV_TX_BUSY; + return -ENOMEM; } skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); - skb_put(skb, size); + skb_put(skb, data_length); /* * Copy TX information over from original frame to @@ -63,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; @@ -73,22 +73,33 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; + skb->do_not_encrypt = 1; + + /* + * RTS/CTS frame should use the length of the frame plus any + * encryption overhead that will be added by the hardware. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (!frag_skb->do_not_encrypt) + data_length += rt2x00crypto_tx_overhead(tx_info); +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, size, tx_info, + frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); else ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, size, tx_info, + frag_skb->data, data_length, tx_info, (struct ieee80211_rts *)(skb->data)); - if (rt2x00queue_write_tx_frame(queue, skb)) { + retval = rt2x00queue_write_tx_frame(queue, skb); + if (retval) { dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); - return NETDEV_TX_BUSY; } - return NETDEV_TX_OK; + return retval; } int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) @@ -106,11 +117,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * Note that we can only stop the TX queues inside the TX path * due to possible race conditions in mac80211. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { - ieee80211_stop_queues(hw); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + goto exit_fail; /* * Determine which queue to put packet on. @@ -141,26 +149,25 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | IEEE80211_TX_CTL_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { - if (rt2x00queue_available(queue) <= 1) { - ieee80211_stop_queue(rt2x00dev->hw, qid); - return NETDEV_TX_BUSY; - } - - if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) { - ieee80211_stop_queue(rt2x00dev->hw, qid); - return NETDEV_TX_BUSY; - } - } + if (rt2x00queue_available(queue) <= 1) + goto exit_fail; - if (rt2x00queue_write_tx_frame(queue, skb)) { - ieee80211_stop_queue(rt2x00dev->hw, qid); - return NETDEV_TX_BUSY; + if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) + goto exit_fail; } + if (rt2x00queue_write_tx_frame(queue, skb)) + goto exit_fail; + if (rt2x00queue_threshold(queue)) ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_OK; + + exit_fail: + ieee80211_stop_queue(rt2x00dev->hw, qid); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; } EXPORT_SYMBOL_GPL(rt2x00mac_tx); @@ -168,7 +175,7 @@ int rt2x00mac_start(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; return rt2x00lib_start(rt2x00dev); @@ -179,7 +186,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return; rt2x00lib_stop(rt2x00dev); @@ -199,12 +206,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, * Don't allow interfaces to be added * the device has disappeared. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - !test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || + !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return -ENODEV; switch (conf->type) { - case IEEE80211_IF_TYPE_AP: + case NL80211_IFTYPE_AP: /* * We don't support mixed combinations of * sta and ap interfaces. @@ -220,8 +227,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, return -ENOBUFS; break; - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: /* * We don't support mixed combinations of * sta and ap interfaces. @@ -249,7 +256,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, */ for (i = 0; i < queue->limit; i++) { entry = &queue->entries[i]; - if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) + if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) break; } @@ -261,7 +268,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, * increase interface count and start initialization. */ - if (conf->type == IEEE80211_IF_TYPE_AP) + if (conf->type == NL80211_IFTYPE_AP) rt2x00dev->intf_ap_count++; else rt2x00dev->intf_sta_count++; @@ -270,7 +277,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, spin_lock_init(&intf->seqlock); intf->beacon = entry; - if (conf->type == IEEE80211_IF_TYPE_AP) + if (conf->type == NL80211_IFTYPE_AP) memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN); memcpy(&intf->mac, conf->mac_addr, ETH_ALEN); @@ -303,12 +310,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, * either the device has disappeared or when * no interface is present. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) || - (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || + (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) || + (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count)) return; - if (conf->type == IEEE80211_IF_TYPE_AP) + if (conf->type == NL80211_IFTYPE_AP) rt2x00dev->intf_ap_count--; else rt2x00dev->intf_sta_count--; @@ -317,59 +324,59 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, * Release beacon entry so it is available for * new interfaces again. */ - __clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); + clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); /* * Make sure the bssid and mac address registers * are cleared to prevent false ACKing of frames. */ rt2x00lib_config_intf(rt2x00dev, intf, - IEEE80211_IF_TYPE_INVALID, NULL, NULL); + NL80211_IFTYPE_UNSPECIFIED, NULL, NULL); } EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - int force_reconfig; + int radio_on; + int status; /* * Mac80211 might be calling this function while we are trying * to remove the device or perhaps suspending it. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; /* - * Check if we need to disable the radio, - * if this is not the case, at least the RX must be disabled. + * Only change device state when the radio is enabled. It does not + * matter what parameters we have configured when the radio is disabled + * because we won't be able to send or receive anyway. Also note that + * some configuration parameters (e.g. channel and antenna values) can + * only be set when the radio is enabled. */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) { - if (!conf->radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); - else - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); - } + radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); + if (conf->radio_enabled) { + /* For programming the values, we have to turn RX off */ + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); - /* - * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently - * been started and the configuration must be forced upon the hardware. - * Otherwise registers will not be intialized correctly and could - * result in non-working hardware because essential registers aren't - * initialized. - */ - force_reconfig = - __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + /* Enable the radio */ + status = rt2x00lib_enable_radio(rt2x00dev); + if (unlikely(status)) + return status; - rt2x00lib_config(rt2x00dev, conf, force_reconfig); + /* + * When we've just turned on the radio, we want to reprogram + * everything to ensure a consistent state + */ + rt2x00lib_config(rt2x00dev, conf, !radio_on); - /* - * Reenable RX only if the radio should be on. - */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + /* Turn RX back on */ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - else if (conf->radio_enabled) - return rt2x00lib_enable_radio(rt2x00dev); + } else { + /* Disable the radio */ + rt2x00lib_disable_radio(rt2x00dev); + } return 0; } @@ -388,7 +395,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, * Mac80211 might be calling this function while we are trying * to remove the device or perhaps suspending it. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; spin_lock(&intf->lock); @@ -467,6 +474,91 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); +#ifdef CONFIG_RT2X00_LIB_CRYPTO +int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + int (*set_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); + struct rt2x00lib_crypto crypto; + + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + return -EOPNOTSUPP; + else if (key->keylen > 32) + return -ENOSPC; + + memset(&crypto, 0, sizeof(crypto)); + + /* + * When in STA mode, bssidx is always 0 otherwise local_address[5] + * contains the bss number, see BSS_ID_MASK comments for details. + */ + if (rt2x00dev->intf_sta_count) + crypto.bssidx = 0; + else + crypto.bssidx = + local_address[5] & (rt2x00dev->ops->max_ap_intf - 1); + + crypto.cipher = rt2x00crypto_key_to_cipher(key); + if (crypto.cipher == CIPHER_NONE) + return -EOPNOTSUPP; + + crypto.cmd = cmd; + crypto.address = address; + + if (crypto.cipher == CIPHER_TKIP) { + if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) + memcpy(&crypto.key, + &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], + sizeof(crypto.key)); + + if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) + memcpy(&crypto.tx_mic, + &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + sizeof(crypto.tx_mic)); + + if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) + memcpy(&crypto.rx_mic, + &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + sizeof(crypto.rx_mic)); + } else + memcpy(&crypto.key, &key->key[0], key->keylen); + + /* + * Each BSS has a maximum of 4 shared keys. + * Shared key index values: + * 0) BSS0 key0 + * 1) BSS0 key1 + * ... + * 4) BSS1 key0 + * ... + * 8) BSS2 key0 + * ... + * Both pairwise as shared key indeces are determined by + * driver. This is required because the hardware requires + * keys to be assigned in correct order (When key 1 is + * provided but key 0 is not, then the key is not found + * by the hardware during RX). + */ + if (cmd == SET_KEY) + key->hw_key_idx = 0; + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + set_key = rt2x00dev->ops->lib->config_pairwise_key; + else + set_key = rt2x00dev->ops->lib->config_shared_key; + + if (!set_key) + return -EOPNOTSUPP; + + return set_key(rt2x00dev, &crypto, key); +} +EXPORT_SYMBOL_GPL(rt2x00mac_set_key); +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { @@ -575,10 +667,11 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, queue->cw_max = 10; /* cw_min: 2^10 = 1024. */ queue->aifs = params->aifs; + queue->txop = params->txop; INFO(rt2x00dev, - "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", - queue_idx, queue->cw_min, queue->cw_max, queue->aifs); + "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n", + queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 898cdd7f57d..1676ac48479 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -33,10 +33,11 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - unsigned int frame_size; - unsigned int reserved_size; struct sk_buff *skb; struct skb_frame_desc *skbdesc; + unsigned int frame_size; + unsigned int head_size = 0; + unsigned int tail_size = 0; /* * The frame size includes descriptor size, because the @@ -49,16 +50,32 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, * this means we need at least 3 bytes for moving the frame * into the correct offset. */ - reserved_size = 4; + head_size = 4; + + /* + * For IV/EIV/ICV assembly we must make sure there is + * at least 8 bytes bytes available in headroom for IV/EIV + * and 4 bytes for ICV data as tailroon. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + head_size += 8; + tail_size += 4; + } +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* * Allocate skbuffer. */ - skb = dev_alloc_skb(frame_size + reserved_size); + skb = dev_alloc_skb(frame_size + head_size + tail_size); if (!skb) return NULL; - skb_reserve(skb, reserved_size); + /* + * Make sure we not have a frame with the requested bytes + * available in the head and tail. + */ + skb_reserve(skb, head_size); skb_put(skb, frame_size); /* @@ -83,8 +100,21 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, - DMA_TO_DEVICE); + /* + * If device has requested headroom, we should make sure that + * is also mapped to the DMA so it can be used for transfering + * additional descriptor information to the hardware. + */ + skb_push(skb, rt2x00dev->hw->extra_tx_headroom); + + skbdesc->skb_dma = + dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE); + + /* + * Restore data pointer to original location again. + */ + skb_pull(skb, rt2x00dev->hw->extra_tx_headroom); + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; } EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); @@ -100,7 +130,12 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) } if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { - dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + /* + * Add headroom to the skb length, it has been removed + * by the driver, but it was actually mapped to DMA. + */ + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, + skb->len + rt2x00dev->hw->extra_tx_headroom, DMA_TO_DEVICE); skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; } @@ -120,7 +155,6 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); - struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); @@ -140,7 +174,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; - /* Data length should be extended with 4 bytes for CRC */ + /* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */ data_length = entry->skb->len + 4; /* @@ -149,6 +183,35 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) __set_bit(ENTRY_TXD_ACK, &txdesc->flags); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) && + !entry->skb->do_not_encrypt) { + struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; + + __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); + + txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); + + if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); + + txdesc->key_idx = hw_key->hw_key_idx; + txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + + /* + * Extend frame length to include all encryption overhead + * that will be added by the hardware. + */ + data_length += rt2x00crypto_tx_overhead(tx_info); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) + __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); + } +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + /* * Check if this is a RTS/CTS frame */ @@ -214,16 +277,22 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * sequence counter given by mac80211. */ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - spin_lock_irqsave(&intf->seqlock, irqflags); + if (likely(tx_info->control.vif)) { + struct rt2x00_intf *intf; - if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) - intf->seqno += 0x10; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + intf = vif_to_intf(tx_info->control.vif); - spin_unlock_irqrestore(&intf->seqlock, irqflags); + spin_lock_irqsave(&intf->seqlock, irqflags); - __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock_irqrestore(&intf->seqlock, irqflags); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); + } } /* @@ -305,11 +374,12 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; + unsigned int iv_len; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; - if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { + if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { ERROR(queue->rt2x00dev, "Arrived at non-free entry in the non-full queue %d.\n" "Please file bug report to %s.\n", @@ -326,21 +396,42 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) rt2x00queue_create_tx_descriptor(entry, &txdesc); /* - * skb->cb array is now ours and we are free to use it. + * All information is retreived from the skb->cb array, + * now we should claim ownership of the driver part of that + * array. */ skbdesc = get_skb_frame_desc(entry->skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + /* + * When hardware encryption is supported, and this frame + * is to be encrypted, we should strip the IV/EIV data from + * the frame so we can provide it to the driver seperately. + */ + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags) && + (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)) { + iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len; + rt2x00crypto_tx_remove_iv(skb, iv_len); + } + + /* + * It could be possible that the queue was corrupted and this + * call failed. Just drop the frame, we cannot rollback and pass + * the frame to mac80211 because the skb->cb has now been tainted. + */ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { - __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - return -EIO; + clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; + return 0; } if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) rt2x00queue_map_txskb(queue->rt2x00dev, skb); - __set_bit(ENTRY_DATA_PENDING, &entry->flags); + set_bit(ENTRY_DATA_PENDING, &entry->flags); rt2x00queue_index_inc(queue, Q_INDEX); rt2x00queue_write_tx_descriptor(entry, &txdesc); @@ -653,6 +744,7 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev, queue->rt2x00dev = rt2x00dev; queue->qid = qid; + queue->txop = 0; queue->aifs = 2; queue->cw_min = 5; queue->cw_max = 10; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index ff78e52ce43..9dbf04f0f04 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -87,10 +87,13 @@ enum data_queue_qid { * * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX + * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by + * mac80211 but was stripped for processing by the driver. */ enum skb_frame_desc_flags { - SKBDESC_DMA_MAPPED_RX = (1 << 0), - SKBDESC_DMA_MAPPED_TX = (1 << 1), + SKBDESC_DMA_MAPPED_RX = 1 << 0, + SKBDESC_DMA_MAPPED_TX = 1 << 1, + FRAME_DESC_IV_STRIPPED = 1 << 2, }; /** @@ -104,6 +107,8 @@ enum skb_frame_desc_flags { * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. + * @iv: IV data used during encryption/decryption. + * @eiv: EIV data used during encryption/decryption. * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ @@ -113,6 +118,9 @@ struct skb_frame_desc { unsigned int desc_len; void *desc; + __le32 iv; + __le32 eiv; + dma_addr_t skb_dma; struct queue_entry *entry; @@ -132,13 +140,14 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) /** * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc * - * @RXDONE_SIGNAL_PLCP: Does the signal field contain the plcp value, - * or does it contain the bitrate itself. + * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. + * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. * @RXDONE_MY_BSS: Does this frame originate from device's BSS. */ enum rxdone_entry_desc_flags { RXDONE_SIGNAL_PLCP = 1 << 0, - RXDONE_MY_BSS = 1 << 1, + RXDONE_SIGNAL_BITRATE = 1 << 1, + RXDONE_MY_BSS = 1 << 2, }; /** @@ -152,7 +161,11 @@ enum rxdone_entry_desc_flags { * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). - + * @cipher: Cipher type used during decryption. + * @cipher_status: Decryption status. + * @iv: IV data used during decryption. + * @eiv: EIV data used during decryption. + * @icv: ICV data used during decryption. */ struct rxdone_entry_desc { u64 timestamp; @@ -161,6 +174,12 @@ struct rxdone_entry_desc { int size; int flags; int dev_flags; + u8 cipher; + u8 cipher_status; + + __le32 iv; + __le32 eiv; + __le32 icv; }; /** @@ -206,6 +225,10 @@ struct txdone_entry_desc { * @ENTRY_TXD_BURST: This frame belongs to the same burst event. * @ENTRY_TXD_ACK: An ACK is required for this frame. * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used. + * @ENTRY_TXD_ENCRYPT: This frame should be encrypted. + * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). + * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. + * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, @@ -218,6 +241,10 @@ enum txentry_desc_flags { ENTRY_TXD_BURST, ENTRY_TXD_ACK, ENTRY_TXD_RETRY_MODE, + ENTRY_TXD_ENCRYPT, + ENTRY_TXD_ENCRYPT_PAIRWISE, + ENTRY_TXD_ENCRYPT_IV, + ENTRY_TXD_ENCRYPT_MMIC, }; /** @@ -236,6 +263,9 @@ enum txentry_desc_flags { * @ifs: IFS value. * @cw_min: cwmin value. * @cw_max: cwmax value. + * @cipher: Cipher type used for encryption. + * @key_idx: Key index used for encryption. + * @iv_offset: Position where IV should be inserted by hardware. */ struct txentry_desc { unsigned long flags; @@ -252,6 +282,10 @@ struct txentry_desc { short ifs; short cw_min; short cw_max; + + enum cipher cipher; + u16 key_idx; + u16 iv_offset; }; /** @@ -335,6 +369,7 @@ enum queue_index { * @length: Number of frames in queue. * @index: Index pointers to entry positions in the queue, * use &enum queue_index to get a specific index field. + * @txop: maximum burst time. * @aifs: The aifs value for outgoing frames (field ignored in RX queue). * @cw_min: The cw min value for outgoing frames (field ignored in RX queue). * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). @@ -354,6 +389,7 @@ struct data_queue { unsigned short length; unsigned short index[Q_INDEX_MAX]; + unsigned short txop; unsigned short aifs; unsigned short cw_min; unsigned short cw_max; @@ -484,25 +520,51 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) } /** - * rt2x00_desc_read - Read a word from the hardware descriptor. + * _rt2x00_desc_read - Read a word from the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be read. + * @value: Address where the descriptor value should be written into. + */ +static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value) +{ + *value = desc[word]; +} + +/** + * rt2x00_desc_read - Read a word from the hardware descriptor, this + * function will take care of the byte ordering. * @desc: Base descriptor address * @word: Word index from where the descriptor should be read. * @value: Address where the descriptor value should be written into. */ static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value) { - *value = le32_to_cpu(desc[word]); + __le32 tmp; + _rt2x00_desc_read(desc, word, &tmp); + *value = le32_to_cpu(tmp); +} + +/** + * rt2x00_desc_write - write a word to the hardware descriptor, this + * function will take care of the byte ordering. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be written. + * @value: Value that should be written into the descriptor. + */ +static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value) +{ + desc[word] = value; } /** - * rt2x00_desc_write - wrote a word to the hardware descriptor. + * rt2x00_desc_write - write a word to the hardware descriptor. * @desc: Base descriptor address * @word: Word index from where the descriptor should be written. * @value: Value that should be written into the descriptor. */ static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) { - desc[word] = cpu_to_le32(value); + _rt2x00_desc_write(desc, word, cpu_to_le32(value)); } #endif /* RT2X00QUEUE_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 2ea7866abd5..c2fba7c9f05 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -27,6 +27,16 @@ #define RT2X00REG_H /* + * RX crypto status + */ +enum rx_crypto { + RX_CRYPTO_SUCCESS = 0, + RX_CRYPTO_FAIL_ICV = 1, + RX_CRYPTO_FAIL_MIC = 2, + RX_CRYPTO_FAIL_KEY = 3, +}; + +/* * Antenna values */ enum antenna { @@ -104,7 +114,14 @@ enum cipher { */ CIPHER_CKIP64 = 5, CIPHER_CKIP128 = 6, - CIPHER_TKIP_NO_MIC = 7, + CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */ + +/* + * Max cipher type. + * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128 + * are excluded due to limitations in mac80211. + */ + CIPHER_MAX = 4, }; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index 04b29716d35..c3f53a92180 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -41,20 +41,19 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) /* * Only continue if there are enabled interfaces. */ - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return 0; if (state == RFKILL_STATE_UNBLOCKED) { - INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); - __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); + INFO(rt2x00dev, "RFKILL event: enabling radio.\n"); + clear_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags); retval = rt2x00lib_enable_radio(rt2x00dev); } else if (state == RFKILL_STATE_SOFT_BLOCKED) { - INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); - __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); + INFO(rt2x00dev, "RFKILL event: disabling radio.\n"); + set_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags); rt2x00lib_disable_radio(rt2x00dev); } else { - WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n", - state); + WARNING(rt2x00dev, "RFKILL event: unknown state %d.\n", state); } return retval; @@ -64,7 +63,12 @@ static int rt2x00rfkill_get_state(void *data, enum rfkill_state *state) { struct rt2x00_dev *rt2x00dev = data; - *state = rt2x00dev->rfkill->state; + /* + * rfkill_poll reports 1 when the key has been pressed and the + * radio should be blocked. + */ + *state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ? + RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; return 0; } @@ -73,19 +77,18 @@ static void rt2x00rfkill_poll(struct work_struct *work) { struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, rfkill_work.work); - int state; + enum rfkill_state state; - if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) + if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state) || + !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return; /* - * rfkill_poll reports 1 when the key has been pressed and the - * radio should be blocked. + * Poll latest state and report it to rfkill who should sort + * out if the state should be toggled or not. */ - state = !rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; - - rfkill_force_state(rt2x00dev->rfkill, state); + if (!rt2x00rfkill_get_state(rt2x00dev, &state)) + rfkill_force_state(rt2x00dev->rfkill, state); queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->rfkill_work, RFKILL_POLL_INTERVAL); @@ -93,8 +96,8 @@ static void rt2x00rfkill_poll(struct work_struct *work) void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || - !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) || + test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) return; if (rfkill_register(rt2x00dev->rfkill)) { @@ -114,7 +117,7 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) || !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) return; @@ -127,21 +130,30 @@ void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + struct device *dev = wiphy_dev(rt2x00dev->hw->wiphy); + + if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) return; - rt2x00dev->rfkill = - rfkill_allocate(wiphy_dev(rt2x00dev->hw->wiphy), RFKILL_TYPE_WLAN); + rt2x00dev->rfkill = rfkill_allocate(dev, RFKILL_TYPE_WLAN); if (!rt2x00dev->rfkill) { ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n"); return; } + __set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state); + rt2x00dev->rfkill->name = rt2x00dev->ops->name; rt2x00dev->rfkill->data = rt2x00dev; - rt2x00dev->rfkill->state = -1; rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; - rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state; + if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) { + rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state; + rt2x00dev->rfkill->state = + rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ? + RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; + } else { + rt2x00dev->rfkill->state = RFKILL_STATE_UNBLOCKED; + } INIT_DELAYED_WORK(&rt2x00dev->rfkill_work, rt2x00rfkill_poll); @@ -150,8 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || - !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags)) return; cancel_delayed_work_sync(&rt2x00dev->rfkill_work); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 2050227ea53..b73a7e0aeed 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -163,16 +163,11 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct txdone_entry_desc txdesc; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* - * Remove the descriptor data from the buffer. - */ - skb_pull(entry->skb, entry->queue->desc_size); - - /* * Obtain the status about this packet. * Note that when the status is 0 it does not mean the * frame was send out correctly. It only means the frame @@ -224,6 +219,12 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry) entry->skb->data, length, rt2x00usb_interrupt_txdone, entry); + /* + * Make sure the skb->data pointer points to the frame, not the + * descriptor. + */ + skb_pull(entry->skb, entry->queue->desc_size); + return 0; } EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); @@ -232,7 +233,7 @@ static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry) { struct queue_entry_priv_usb *entry_priv = entry->priv_data; - if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) + if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) usb_submit_urb(entry_priv->urb, GFP_ATOMIC); } @@ -283,7 +284,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u8 rxd[32]; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; @@ -293,7 +294,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * a problem. */ if (urb->actual_length < entry->queue->desc_size || urb->status) { - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); usb_submit_urb(urb, GFP_ATOMIC); return; } @@ -361,7 +362,7 @@ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, entry->skb->data, entry->skb->len, rt2x00usb_interrupt_rxdone, entry); - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); usb_submit_urb(entry_priv->urb, GFP_ATOMIC); } EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 087e90b328c..a461620b489 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -38,6 +38,13 @@ #include "rt61pci.h" /* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 0; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * BBP and RF register require indirect register access, * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. @@ -156,7 +163,7 @@ rf_write: rt2x00_rf_write(rt2x00dev, word, value); } -#ifdef CONFIG_RT61PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS /* * This function is only called from rt61pci_led_brightness() * make gcc happy by placing this function inside the @@ -188,7 +195,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); } -#endif /* CONFIG_RT61PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { @@ -264,7 +271,7 @@ static const struct rt2x00debug rt61pci_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT61PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -274,9 +281,9 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) } #else #define rt61pci_rfkill_poll NULL -#endif /* CONFIG_RT61PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ -#ifdef CONFIG_RT61PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS static void rt61pci_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -341,11 +348,209 @@ static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, led->led_dev.blink_set = rt61pci_blink_set; led->flags = LED_INITIALIZED; } -#endif /* CONFIG_RT61PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. */ +static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for shared keys. We have 1 register + * with key valid bits. The goal is simple, read + * the register, if that is full we have no slots + * left. + * Note that each BSS is allowed to have up to 4 + * shared keys, so put a mask over the allowed + * entries. + */ + mask = (0xf << crypto->bssidx); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + /* + * The cipher types are stored over 2 registers. + * bssidx 0 and 1 keys are stored in SEC_CSR1 and + * bssidx 1 and 2 keys are stored in SEC_CSR5. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + if (key->hw_key_idx < 8) { + field.bit_offset = (3 * key->hw_key_idx); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg); + } else { + field.bit_offset = (3 * (key->hw_key_idx - 8)); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg); + } + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR0 contains only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg); + + return 0; +} + +static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_pairwise_ta_entry addr_entry; + struct hw_key_entry key_entry; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for pairwise keys. We have 2 registers + * with key valid bits. The goal is simple, read + * the first register, if that is full move to + * the next register. + * When both registers are full, we drop the key, + * otherwise we use the first invalid entry. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (reg && reg == ~0) { + key->hw_key_idx = 32; + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (reg && reg == ~0) + return -ENOSPC; + } + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + memset(&addr_entry, 0, sizeof(addr_entry)); + memcpy(&addr_entry, crypto->address, ETH_ALEN); + addr_entry.cipher = crypto->cipher; + + reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &addr_entry, sizeof(addr_entry)); + + /* + * Enable pairwise lookup table for given BSS idx, + * without this received frames will not be decrypted + * by the hardware. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); + reg |= (1 << crypto->bssidx); + rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + if (key->hw_key_idx < 32) { + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg); + } else { + mask = 1 << (key->hw_key_idx - 32); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg); + } + + return 0; +} + static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -440,6 +645,30 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); } + +static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain = 0; + + if (libconf->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, const int basic_rate_mask) { @@ -758,6 +987,9 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { + /* Always recalculate LNA gain before changing configuration */ + rt61pci_config_lna_gain(rt2x00dev, libconf); + if (flags & CONFIG_UPDATE_PHYMODE) rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) @@ -1246,16 +1478,6 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - /* * Clear all beacons * For the Beacon base registers we only need to clear @@ -1533,8 +1755,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, * TX descriptor initialization */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) + struct sk_buff *skb, + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1548,7 +1770,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); @@ -1561,6 +1783,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv); + _rt2x00_desc_write(txd, 4, skbdesc->eiv); + } + rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, @@ -1595,11 +1822,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, + test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, + test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); rt2x00_desc_write(txd, 0, word); } @@ -1676,40 +1907,27 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, */ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) { - u16 eeprom; - u8 offset; + u8 offset = rt2x00dev->lna_gain; u8 lna; lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); switch (lna) { case 3: - offset = 90; + offset += 90; break; case 2: - offset = 74; + offset += 74; break; case 1: - offset = 64; + offset += 64; break; default: return 0; } if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - offset += 14; - if (lna == 3 || lna == 2) offset += 10; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; @@ -1718,6 +1936,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt61pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word1; @@ -1728,6 +1947,38 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); + rxdesc->cipher_status = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv); + _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv); + _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + /* + * FIXME: Legacy driver indicates that the frame does + * contain the Michael Mic. Unfortunately, in rt2x00 + * the MIC seems to be missing completely... + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1735,11 +1986,13 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; } @@ -1860,7 +2113,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) if (!reg && !reg_mcu) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -2060,10 +2313,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Detect if this device has an hardware controlled radio. */ -#ifdef CONFIG_RT61PCI_RFKILL +#ifdef CONFIG_RT2X00_LIB_RFKILL if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT61PCI_RFKILL */ +#endif /* CONFIG_RT2X00_LIB_RFKILL */ /* * Read frequency offset and RF programming sequence. @@ -2121,7 +2374,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * If the eeprom value is invalid, * switch to default led mode. */ -#ifdef CONFIG_RT61PCI_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); @@ -2155,7 +2408,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); -#endif /* CONFIG_RT61PCI_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ return 0; } @@ -2274,10 +2527,11 @@ static const struct rf_channel rf_vals_seq[] = { { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, }; -static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -2294,20 +2548,10 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { spec->num_channels = 14; @@ -2321,13 +2565,28 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_rf(&rt2x00dev->chip, RF5325)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_seq); + } - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; - spec->tx_power_a = txpower; + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); } + + return 0; } static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -2348,13 +2607,17 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt61pci_probe_hw_mode(rt2x00dev); + retval = rt61pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires firmware and DMA mapped skbs. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2381,6 +2644,63 @@ static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, return 0; } +static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + if (queue_idx < 2) { + field.bit_offset = queue_idx * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + } else if (queue_idx < 4) { + field.bit_offset = (queue_idx - 2) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + } + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg); + + return 0; +} + static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -2404,10 +2724,11 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, + .conf_tx = rt61pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt61pci_get_tsf, }; @@ -2432,6 +2753,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_beacon = rt61pci_write_beacon, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, + .config_shared_key = rt61pci_config_shared_key, + .config_pairwise_key = rt61pci_config_pairwise_key, .config_filter = rt61pci_config_filter, .config_intf = rt61pci_config_intf, .config_erp = rt61pci_config_erp, diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 1004d5b899e..8ec1451308c 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -134,6 +134,16 @@ #define PAIRWISE_KEY_TABLE_BASE 0x1200 #define PAIRWISE_TA_TABLE_BASE 0x1a00 +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_TA_ENTRY(__idx) \ + ( PAIRWISE_TA_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) + struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; @@ -142,7 +152,8 @@ struct hw_key_entry { struct hw_pairwise_ta_entry { u8 address[6]; - u8 reserved[2]; + u8 cipher; + u8 reserved; } __attribute__ ((packed)); /* @@ -662,6 +673,10 @@ struct hw_pairwise_ta_entry { * SEC_CSR4: Pairwise key table lookup control. */ #define SEC_CSR4 0x30b0 +#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) +#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) +#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) +#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) /* * SEC_CSR5: shared key table security mode register. @@ -1428,8 +1443,10 @@ struct hw_pairwise_ta_entry { /* * Word4 + * ICV: Received ICV of originally encrypted. + * NOTE: This is a guess, the official definition is "reserved" */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) +#define RXD_W4_ICV FIELD32(0xffffffff) /* * the above 20-byte is called RXINFO and will be DMAed to MAC RX block @@ -1465,17 +1482,10 @@ struct hw_pairwise_ta_entry { #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT61PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 9761eaaa08b..934f8e03c5a 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -37,6 +37,13 @@ #include "rt73usb.h" /* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 0; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * All access to the CSR registers will go through the methods * rt73usb_register_read and rt73usb_register_write. @@ -285,7 +292,7 @@ static const struct rt2x00debug rt73usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT73USB_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS static void rt73usb_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -352,11 +359,224 @@ static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev, led->led_dev.blink_set = rt73usb_blink_set; led->flags = LED_INITIALIZED; } -#endif /* CONFIG_RT73USB_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. */ +static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + int timeout; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for shared keys. We have 1 register + * with key valid bits. The goal is simple, read + * the register, if that is full we have no slots + * left. + * Note that each BSS is allowed to have up to 4 + * shared keys, so put a mask over the allowed + * entries. + */ + mask = (0xf << crypto->bssidx); + + rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = SHARED_KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, reg, + &key_entry, + sizeof(key_entry), + timeout); + + /* + * The cipher types are stored over 2 registers. + * bssidx 0 and 1 keys are stored in SEC_CSR1 and + * bssidx 1 and 2 keys are stored in SEC_CSR5. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + if (key->hw_key_idx < 8) { + field.bit_offset = (3 * key->hw_key_idx); + field.bit_mask = 0x7 << field.bit_offset; + + rt73usb_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt73usb_register_write(rt2x00dev, SEC_CSR1, reg); + } else { + field.bit_offset = (3 * (key->hw_key_idx - 8)); + field.bit_mask = 0x7 << field.bit_offset; + + rt73usb_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt73usb_register_write(rt2x00dev, SEC_CSR5, reg); + } + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR0 contains only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + mask = 1 << key->hw_key_idx; + + rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt73usb_register_write(rt2x00dev, SEC_CSR0, reg); + + return 0; +} + +static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_pairwise_ta_entry addr_entry; + struct hw_key_entry key_entry; + int timeout; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for pairwise keys. We have 2 registers + * with key valid bits. The goal is simple, read + * the first register, if that is full move to + * the next register. + * When both registers are full, we drop the key, + * otherwise we use the first invalid entry. + */ + rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + if (reg && reg == ~0) { + key->hw_key_idx = 32; + rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + if (reg && reg == ~0) + return -ENOSPC; + } + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, reg, + &key_entry, + sizeof(key_entry), + timeout); + + /* + * Send the address and cipher type to the hardware register. + * This data fits within the CSR cache size, so we can use + * rt73usb_register_multiwrite() directly. + */ + memset(&addr_entry, 0, sizeof(addr_entry)); + memcpy(&addr_entry, crypto->address, ETH_ALEN); + addr_entry.cipher = crypto->cipher; + + reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); + rt73usb_register_multiwrite(rt2x00dev, reg, + &addr_entry, sizeof(addr_entry)); + + /* + * Enable pairwise lookup table for given BSS idx, + * without this received frames will not be decrypted + * by the hardware. + */ + rt73usb_register_read(rt2x00dev, SEC_CSR4, ®); + reg |= (1 << crypto->bssidx); + rt73usb_register_write(rt2x00dev, SEC_CSR4, reg); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + if (key->hw_key_idx < 32) { + mask = 1 << key->hw_key_idx; + + rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt73usb_register_write(rt2x00dev, SEC_CSR2, reg); + } else { + mask = 1 << (key->hw_key_idx - 32); + + rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt73usb_register_write(rt2x00dev, SEC_CSR3, reg); + } + + return 0; +} + static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -451,6 +671,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); } +static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain = 0; + + if (libconf->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev, const int basic_rate_mask) { @@ -705,6 +945,9 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { + /* Always recalculate LNA gain before changing configuration */ + rt73usb_config_lna_gain(rt2x00dev, libconf); + if (flags & CONFIG_UPDATE_PHYMODE) rt73usb_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) @@ -1034,16 +1277,6 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); @@ -1265,8 +1498,8 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, * TX descriptor initialization */ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) + struct sk_buff *skb, + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1280,7 +1513,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_desc_write(txd, 1, word); @@ -1292,6 +1525,11 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv); + _rt2x00_desc_write(txd, 4, skbdesc->eiv); + } + rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, TXPOWER_TO_DEV(rt2x00dev->tx_power)); @@ -1313,12 +1551,15 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, - skb->len - skbdesc->desc_len); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, + test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, + test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST2, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); rt2x00_desc_write(txd, 0, word); } @@ -1331,7 +1572,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; - u32 word, len; /* * Add the descriptor in front of the skb. @@ -1341,17 +1581,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* - * Adjust the beacon databyte count. The current number is - * calculated before this function gets called, but falsely - * assumes that the descriptor was already present in the SKB. - */ - rt2x00_desc_read(skbdesc->desc, 0, &word); - len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); - len += skbdesc->desc_len; - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); - rt2x00_desc_write(skbdesc->desc, 0, word); - - /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1422,20 +1651,19 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, */ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) { - u16 eeprom; - u8 offset; + u8 offset = rt2x00dev->lna_gain; u8 lna; lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); switch (lna) { case 3: - offset = 90; + offset += 90; break; case 2: - offset = 74; + offset += 74; break; case 1: - offset = 64; + offset += 64; break; default: return 0; @@ -1451,15 +1679,6 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) else if (lna == 2) offset += 8; } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; @@ -1468,6 +1687,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt73usb_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = (__le32 *)entry->skb->data; u32 word0; @@ -1489,6 +1709,38 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); + rxdesc->cipher_status = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(rxd, 2, &rxdesc->iv); + _rt2x00_desc_read(rxd, 3, &rxdesc->eiv); + _rt2x00_desc_read(rxd, 4, &rxdesc->icv); + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + /* + * FIXME: Legacy driver indicates that the frame does + * contain the Michael Mic. Unfortunately, in rt2x00 + * the MIC seems to be missing completely... + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1496,11 +1748,13 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; @@ -1678,7 +1932,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Store led settings, for correct led behaviour. */ -#ifdef CONFIG_RT73USB_LEDS +#ifdef CONFIG_RT2X00_LIB_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); @@ -1711,7 +1965,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A, rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_RDY_A)); -#endif /* CONFIG_RT73USB_LEDS */ +#endif /* CONFIG_RT2X00_LIB_LEDS */ return 0; } @@ -1852,10 +2106,11 @@ static const struct rf_channel rf_vals_5225_2527[] = { }; -static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1872,20 +2127,10 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (rt2x00_rf(&rt2x00dev->chip, RF2528)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); @@ -1903,14 +2148,26 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->channels = rf_vals_5225_2527; } - if (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF5226)) { - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; - spec->tx_power_a = txpower; + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); } + + return 0; } static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1931,13 +2188,17 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt73usb_probe_hw_mode(rt2x00dev); + retval = rt73usb_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires firmware. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1964,6 +2225,63 @@ static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, return 0; } +static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + if (queue_idx < 2) { + field.bit_offset = queue_idx * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, field, queue->txop); + rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + } else if (queue_idx < 4) { + field.bit_offset = (queue_idx - 2) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, field, queue->txop); + rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + } + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt73usb_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg); + + rt73usb_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg); + + rt73usb_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg); + + return 0; +} + #if 0 /* * Mac80211 demands get_tsf must be atomic. @@ -1997,10 +2315,11 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt73usb_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, + .conf_tx = rt73usb_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt73usb_get_tsf, }; @@ -2024,6 +2343,8 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt73usb_kick_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, + .config_shared_key = rt73usb_config_shared_key, + .config_pairwise_key = rt73usb_config_pairwise_key, .config_filter = rt73usb_config_filter, .config_intf = rt73usb_config_intf, .config_erp = rt73usb_config_erp, diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 14849350101..868386c457f 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -92,6 +92,16 @@ #define PAIRWISE_KEY_TABLE_BASE 0x1200 #define PAIRWISE_TA_TABLE_BASE 0x1a00 +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_TA_ENTRY(__idx) \ + ( PAIRWISE_TA_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) + struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; @@ -100,7 +110,8 @@ struct hw_key_entry { struct hw_pairwise_ta_entry { u8 address[6]; - u8 reserved[2]; + u8 cipher; + u8 reserved; } __attribute__ ((packed)); /* @@ -563,6 +574,10 @@ struct hw_pairwise_ta_entry { * SEC_CSR4: Pairwise key table lookup control. */ #define SEC_CSR4 0x30b0 +#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) +#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) +#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) +#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) /* * SEC_CSR5: shared key table security mode register. @@ -1010,8 +1025,10 @@ struct hw_pairwise_ta_entry { /* * Word4 + * ICV: Received ICV of originally encrypted. + * NOTE: This is a guess, the official definition is "reserved" */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) +#define RXD_W4_ICV FIELD32(0xffffffff) /* * the above 20-byte is called RXINFO and will be DMAed to MAC RX block @@ -1033,17 +1050,10 @@ struct hw_pairwise_ta_entry { #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT73USB_H */ diff --git a/drivers/net/wireless/rtl8180.h b/drivers/net/wireless/rtl8180.h index 082a11f93be..8721282a818 100644 --- a/drivers/net/wireless/rtl8180.h +++ b/drivers/net/wireless/rtl8180.h @@ -24,20 +24,6 @@ #define ANAPARAM_PWR1_SHIFT 20 #define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT) -enum rtl8180_tx_desc_flags { - RTL8180_TX_DESC_FLAG_NO_ENC = (1 << 15), - RTL8180_TX_DESC_FLAG_TX_OK = (1 << 15), - RTL8180_TX_DESC_FLAG_SPLCP = (1 << 16), - RTL8180_TX_DESC_FLAG_RX_UNDER = (1 << 16), - RTL8180_TX_DESC_FLAG_MOREFRAG = (1 << 17), - RTL8180_TX_DESC_FLAG_CTS = (1 << 18), - RTL8180_TX_DESC_FLAG_RTS = (1 << 23), - RTL8180_TX_DESC_FLAG_LS = (1 << 28), - RTL8180_TX_DESC_FLAG_FS = (1 << 29), - RTL8180_TX_DESC_FLAG_DMA = (1 << 30), - RTL8180_TX_DESC_FLAG_OWN = (1 << 31) -}; - struct rtl8180_tx_desc { __le32 flags; __le16 rts_duration; @@ -52,23 +38,6 @@ struct rtl8180_tx_desc { u32 reserved[2]; } __attribute__ ((packed)); -enum rtl8180_rx_desc_flags { - RTL8180_RX_DESC_FLAG_ICV_ERR = (1 << 12), - RTL8180_RX_DESC_FLAG_CRC32_ERR = (1 << 13), - RTL8180_RX_DESC_FLAG_PM = (1 << 14), - RTL8180_RX_DESC_FLAG_RX_ERR = (1 << 15), - RTL8180_RX_DESC_FLAG_BCAST = (1 << 16), - RTL8180_RX_DESC_FLAG_PAM = (1 << 17), - RTL8180_RX_DESC_FLAG_MCAST = (1 << 18), - RTL8180_RX_DESC_FLAG_SPLCP = (1 << 25), - RTL8180_RX_DESC_FLAG_FOF = (1 << 26), - RTL8180_RX_DESC_FLAG_DMA_FAIL = (1 << 27), - RTL8180_RX_DESC_FLAG_LS = (1 << 28), - RTL8180_RX_DESC_FLAG_FS = (1 << 29), - RTL8180_RX_DESC_FLAG_EOR = (1 << 30), - RTL8180_RX_DESC_FLAG_OWN = (1 << 31) -}; - struct rtl8180_rx_desc { __le32 flags; __le32 flags2; diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c index b7172a12c05..df7e78ee8a8 100644 --- a/drivers/net/wireless/rtl8180_dev.c +++ b/drivers/net/wireless/rtl8180_dev.c @@ -110,12 +110,12 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; u32 flags = le32_to_cpu(entry->flags); - if (flags & RTL8180_RX_DESC_FLAG_OWN) + if (flags & RTL818X_RX_DESC_FLAG_OWN) return; - if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL | - RTL8180_RX_DESC_FLAG_FOF | - RTL8180_RX_DESC_FLAG_RX_ERR))) + if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL | + RTL818X_RX_DESC_FLAG_FOF | + RTL818X_RX_DESC_FLAG_RX_ERR))) goto done; else { u32 flags2 = le32_to_cpu(entry->flags2); @@ -140,7 +140,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) rx_status.band = dev->conf.channel->band; rx_status.mactime = le64_to_cpu(entry->tsft); rx_status.flag |= RX_FLAG_TSFT; - if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR) + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; ieee80211_rx_irqsafe(dev, skb, &rx_status); @@ -154,10 +154,10 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) done: entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); - entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN | + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | MAX_RX_SIZE); if (priv->rx_idx == 31) - entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR); + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); priv->rx_idx = (priv->rx_idx + 1) % 32; } } @@ -173,7 +173,7 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) struct ieee80211_tx_info *info; u32 flags = le32_to_cpu(entry->flags); - if (flags & RTL8180_TX_DESC_FLAG_OWN) + if (flags & RTL818X_TX_DESC_FLAG_OWN) return; ring->idx = (ring->idx + 1) % ring->entries; @@ -185,7 +185,7 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) memset(&info->status, 0, sizeof(info->status)); if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (flags & RTL8180_TX_DESC_FLAG_TX_OK) + if (flags & RTL818X_TX_DESC_FLAG_TX_OK) info->flags |= IEEE80211_TX_STAT_ACK; else info->status.excessive_retries = 1; @@ -252,20 +252,20 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); - tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS | - RTL8180_TX_DESC_FLAG_LS | + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | + RTL818X_TX_DESC_FLAG_LS | (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | skb->len; if (priv->r8185) - tx_flags |= RTL8180_TX_DESC_FLAG_DMA | - RTL8180_TX_DESC_FLAG_NO_ENC; + tx_flags |= RTL818X_TX_DESC_FLAG_DMA | + RTL818X_TX_DESC_FLAG_NO_ENC; if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { - tx_flags |= RTL8180_TX_DESC_FLAG_RTS; + tx_flags |= RTL818X_TX_DESC_FLAG_RTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { - tx_flags |= RTL8180_TX_DESC_FLAG_CTS; + tx_flags |= RTL818X_TX_DESC_FLAG_CTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -292,8 +292,8 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); entry->frame_len = cpu_to_le32(skb->len); - entry->flags2 = info->control.alt_retry_rate_idx >= 0 ? - ieee80211_get_alt_retry_rate(dev, info)->bitrate << 4 : 0; + entry->flags2 = info->control.retries[0].rate_idx >= 0 ? + ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; entry->retry_limit = info->control.retry_limit; entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); @@ -446,10 +446,10 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), MAX_RX_SIZE, PCI_DMA_FROMDEVICE); entry->rx_buf = cpu_to_le32(*mapping); - entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN | + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | MAX_RX_SIZE); } - entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR); + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); return 0; } @@ -615,7 +615,7 @@ static int rtl8180_start(struct ieee80211_hw *dev) reg |= RTL818X_CMD_TX_ENABLE; rtl818x_iowrite8(priv, &priv->map->CMD, reg); - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; return 0; err_free_rings: @@ -633,7 +633,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev) u8 reg; int i; - priv->mode = IEEE80211_IF_TYPE_INVALID; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); @@ -661,11 +661,11 @@ static int rtl8180_add_interface(struct ieee80211_hw *dev, { struct rtl8180_priv *priv = dev->priv; - if (priv->mode != IEEE80211_IF_TYPE_MNTR) + if (priv->mode != NL80211_IFTYPE_MONITOR) return -EOPNOTSUPP; switch (conf->type) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->mode = conf->type; break; default: @@ -688,7 +688,7 @@ static void rtl8180_remove_interface(struct ieee80211_hw *dev, struct ieee80211_if_init_conf *conf) { struct rtl8180_priv *priv = dev->priv; - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; priv->vif = NULL; } @@ -855,6 +855,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, priv = dev->priv; priv->pdev = pdev; + dev->max_altrates = 1; SET_IEEE80211_DEV(dev, &pdev->dev); pci_set_drvdata(pdev, dev); diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 5a9515c9996..e82bb4d289e 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -58,12 +58,6 @@ struct rtl8187b_rx_hdr { /* {rtl8187,rtl8187b}_tx_info is in skb */ -/* Tx flags are common between rtl8187 and rtl8187b */ -#define RTL8187_TX_FLAG_NO_ENCRYPT (1 << 15) -#define RTL8187_TX_FLAG_MORE_FRAG (1 << 17) -#define RTL8187_TX_FLAG_CTS (1 << 18) -#define RTL8187_TX_FLAG_RTS (1 << 23) - struct rtl8187_tx_hdr { __le32 flags; __le16 rts_duration; diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index ca5deb6244e..e9902613e2e 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -187,18 +187,18 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) } flags = skb->len; - flags |= RTL8187_TX_FLAG_NO_ENCRYPT; + flags |= RTL818X_TX_DESC_FLAG_NO_ENC; flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control)) - flags |= RTL8187_TX_FLAG_MORE_FRAG; + flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { - flags |= RTL8187_TX_FLAG_RTS; + flags |= RTL818X_TX_DESC_FLAG_RTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; rts_dur = ieee80211_rts_duration(dev, priv->vif, skb->len, info); } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { - flags |= RTL8187_TX_FLAG_CTS; + flags |= RTL818X_TX_DESC_FLAG_CTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -354,7 +354,7 @@ static void rtl8187_rx_cb(struct urb *urb) rx_status.freq = dev->conf.channel->center_freq; rx_status.band = dev->conf.channel->band; rx_status.flag |= RX_FLAG_TSFT; - if (flags & (1 << 13)) + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; ieee80211_rx_irqsafe(dev, skb, &rx_status); @@ -836,11 +836,11 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev, struct rtl8187_priv *priv = dev->priv; int i; - if (priv->mode != IEEE80211_IF_TYPE_MNTR) + if (priv->mode != NL80211_IFTYPE_MONITOR) return -EOPNOTSUPP; switch (conf->type) { - case IEEE80211_IF_TYPE_STA: + case NL80211_IFTYPE_STATION: priv->mode = conf->type; break; default: @@ -865,7 +865,7 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev, { struct rtl8187_priv *priv = dev->priv; mutex_lock(&priv->conf_mutex); - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; priv->vif = NULL; mutex_unlock(&priv->conf_mutex); } @@ -1057,7 +1057,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; - priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->mode = NL80211_IFTYPE_MONITOR; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_RX_INCLUDES_FCS; @@ -1184,6 +1184,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, dev->max_signal = 65; } + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) printk(KERN_INFO "rtl8187: inconsistency between id with OEM" " info!\n"); diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h index 00900fe16fc..3538b15211b 100644 --- a/drivers/net/wireless/rtl818x.h +++ b/drivers/net/wireless/rtl818x.h @@ -193,4 +193,39 @@ struct rtl818x_rf_ops { void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *); }; +/* Tx/Rx flags are common between RTL818X chips */ + +enum rtl818x_tx_desc_flags { + RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15), + RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15), + RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16), + RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16), + RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17), + RTL818X_TX_DESC_FLAG_CTS = (1 << 18), + RTL818X_TX_DESC_FLAG_RTS = (1 << 23), + RTL818X_TX_DESC_FLAG_LS = (1 << 28), + RTL818X_TX_DESC_FLAG_FS = (1 << 29), + RTL818X_TX_DESC_FLAG_DMA = (1 << 30), + RTL818X_TX_DESC_FLAG_OWN = (1 << 31) +}; + +enum rtl818x_rx_desc_flags { + RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12), + RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13), + RTL818X_RX_DESC_FLAG_PM = (1 << 14), + RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15), + RTL818X_RX_DESC_FLAG_BCAST = (1 << 16), + RTL818X_RX_DESC_FLAG_PAM = (1 << 17), + RTL818X_RX_DESC_FLAG_MCAST = (1 << 18), + RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25), + RTL818X_RX_DESC_FLAG_FOF = (1 << 26), + RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27), + RTL818X_RX_DESC_FLAG_LS = (1 << 28), + RTL818X_RX_DESC_FLAG_FS = (1 << 29), + RTL818X_RX_DESC_FLAG_EOR = (1 << 30), + RTL818X_RX_DESC_FLAG_OWN = (1 << 31) +}; + #endif /* RTL818X_H */ diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 98df9bc7836..67b26d3c3cd 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/firmware.h> #include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> @@ -34,9 +33,6 @@ #include "orinoco.h" -static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; -static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; - /********************************************************************/ /* Module stuff */ /********************************************************************/ @@ -71,161 +67,11 @@ struct orinoco_pccard { static int spectrum_cs_config(struct pcmcia_device *link); static void spectrum_cs_release(struct pcmcia_device *link); -/********************************************************************/ -/* Firmware downloader */ -/********************************************************************/ - -/* Position of PDA in the adapter memory */ -#define EEPROM_ADDR 0x3000 -#define EEPROM_LEN 0x200 -#define PDA_OFFSET 0x100 - -#define PDA_ADDR (EEPROM_ADDR + PDA_OFFSET) -#define PDA_WORDS ((EEPROM_LEN - PDA_OFFSET) / 2) - /* Constants for the CISREG_CCSR register */ #define HCR_RUN 0x07 /* run firmware after reset */ #define HCR_IDLE 0x0E /* don't run firmware after reset */ #define HCR_MEM16 0x10 /* memory width bit, should be preserved */ -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - -/* End markers */ -#define PDI_END 0x00000000 /* End of PDA */ -#define BLOCK_END 0xFFFFFFFF /* Last image block */ -#define TEXT_END 0x1A /* End of text header */ - -/* - * The following structures have little-endian fields denoted by - * the leading underscore. Don't access them directly - use inline - * functions defined below. - */ - -/* - * The binary image to be downloaded consists of series of data blocks. - * Each block has the following structure. - */ -struct dblock { - __le32 addr; /* adapter address where to write the block */ - __le16 len; /* length of the data only, in bytes */ - char data[0]; /* data to be written */ -} __attribute__ ((packed)); - -/* - * Plug Data References are located in in the image after the last data - * block. They refer to areas in the adapter memory where the plug data - * items with matching ID should be written. - */ -struct pdr { - __le32 id; /* record ID */ - __le32 addr; /* adapter address where to write the data */ - __le32 len; /* expected length of the data, in bytes */ - char next[0]; /* next PDR starts here */ -} __attribute__ ((packed)); - - -/* - * Plug Data Items are located in the EEPROM read from the adapter by - * primary firmware. They refer to the device-specific data that should - * be plugged into the secondary firmware. - */ -struct pdi { - __le16 len; /* length of ID and data, in words */ - __le16 id; /* record ID */ - char data[0]; /* plug data */ -} __attribute__ ((packed)); - - -/* Functions for access to little-endian data */ -static inline u32 -dblock_addr(const struct dblock *blk) -{ - return le32_to_cpu(blk->addr); -} - -static inline u32 -dblock_len(const struct dblock *blk) -{ - return le16_to_cpu(blk->len); -} - -static inline u32 -pdr_id(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->id); -} - -static inline u32 -pdr_addr(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->addr); -} - -static inline u32 -pdr_len(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->len); -} - -static inline u32 -pdi_id(const struct pdi *pdi) -{ - return le16_to_cpu(pdi->id); -} - -/* Return length of the data only, in bytes */ -static inline u32 -pdi_len(const struct pdi *pdi) -{ - return 2 * (le16_to_cpu(pdi->len) - 1); -} - - -/* Set address of the auxiliary port */ -static inline void -spectrum_aux_setaddr(hermes_t *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - - -/* Open access to the auxiliary port */ -static int -spectrum_aux_open(hermes_t *hw) -{ - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - HERMES_AUX_ENABLED) - return 0; - } - - return -EBUSY; -} - #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) @@ -292,275 +138,29 @@ spectrum_reset(struct pcmcia_device *link, int idle) return -ENODEV; } +/********************************************************************/ +/* Device methods */ +/********************************************************************/ -/* - * Scan PDR for the record with the specified RECORD_ID. - * If it's not found, return NULL. - */ -static struct pdr * -spectrum_find_pdr(struct pdr *first_pdr, u32 record_id) -{ - struct pdr *pdr = first_pdr; - - while (pdr_id(pdr) != PDI_END) { - /* - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - return NULL; - - /* If the record ID matches, we are done */ - if (pdr_id(pdr) == record_id) - return pdr; - - pdr = (struct pdr *) pdr->next; - } - return NULL; -} - - -/* Process one Plug Data Item - find corresponding PDR and plug it */ -static int -spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) -{ - struct pdr *pdr; - - /* Find the PDI corresponding to this PDR */ - pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi)); - - /* No match is found, safe to ignore */ - if (!pdr) - return 0; - - /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) != pdr_len(pdr)) - return -EINVAL; - - /* do the actual plugging */ - spectrum_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); - - return 0; -} - - -/* Read PDA from the adapter */ -static int -spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len) -{ - int ret; - int pda_size; - - /* Issue command to read EEPROM */ - ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - - /* Open auxiliary port */ - ret = spectrum_aux_open(hw); - if (ret) - return ret; - - /* read PDA from EEPROM */ - spectrum_aux_setaddr(hw, PDA_ADDR); - hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - if (pda_size > pda_len) - return -EINVAL; - - return 0; -} - - -/* Parse PDA and write the records into the adapter */ -static int -spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, - __le16 *pda) -{ - int ret; - struct pdi *pdi; - struct pdr *first_pdr; - const struct dblock *blk = first_block; - - /* Skip all blocks to locate Plug Data References */ - while (dblock_addr(blk) != BLOCK_END) - blk = (struct dblock *) &blk->data[dblock_len(blk)]; - - first_pdr = (struct pdr *) blk; - - /* Go through every PDI and plug them into the adapter */ - pdi = (struct pdi *) (pda + 2); - while (pdi_id(pdi) != PDI_END) { - ret = spectrum_plug_pdi(hw, first_pdr, pdi); - if (ret) - return ret; - - /* Increment to the next PDI */ - pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return 0; -} - - -/* Load firmware blocks into the adapter */ -static int -spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block) -{ - const struct dblock *blk; - u32 blkaddr; - u32 blklen; - - blk = first_block; - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - - while (dblock_addr(blk) != BLOCK_END) { - spectrum_aux_setaddr(hw, blkaddr); - hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, - blklen); - - blk = (struct dblock *) &blk->data[blklen]; - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - } - return 0; -} - - -/* - * Process a firmware image - stop the card, load the firmware, reset - * the card and make sure it responds. For the secondary firmware take - * care of the PDA - read it and then write it on top of the firmware. - */ static int -spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link, - const unsigned char *image, int secondary) +spectrum_cs_hard_reset(struct orinoco_private *priv) { - int ret; - const unsigned char *ptr; - const struct dblock *first_block; - - /* Plug Data Area (PDA) */ - __le16 pda[PDA_WORDS]; - - /* Binary block begins after the 0x1A marker */ - ptr = image; - while (*ptr++ != TEXT_END); - first_block = (const struct dblock *) ptr; - - /* Read the PDA */ - if (secondary) { - ret = spectrum_read_pda(hw, pda, sizeof(pda)); - if (ret) - return ret; - } - - /* Stop the firmware, so that it can be safely rewritten */ - ret = spectrum_reset(link, 1); - if (ret) - return ret; - - /* Program the adapter with new firmware */ - ret = spectrum_load_blocks(hw, first_block); - if (ret) - return ret; - - /* Write the PDA to the adapter */ - if (secondary) { - ret = spectrum_apply_pda(hw, first_block, pda); - if (ret) - return ret; - } - - /* Run the firmware */ - ret = spectrum_reset(link, 0); - if (ret) - return ret; - - /* Reset hermes chip and make sure it responds */ - ret = hermes_init(hw); - - /* hermes_reset() should return 0 with the secondary firmware */ - if (secondary && ret != 0) - return -ENODEV; + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; - /* And this should work with any firmware */ - if (!hermes_present(hw)) - return -ENODEV; + /* Soft reset using COR and HCR */ + spectrum_reset(link, 0); return 0; } - -/* - * Download the firmware into the card, this also does a PCMCIA soft - * reset on the card, to make sure it's in a sane state. - */ static int -spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link) -{ - int ret; - const struct firmware *fw_entry; - - if (request_firmware(&fw_entry, primary_fw_name, - &handle_to_dev(link)) != 0) { - printk(KERN_ERR PFX "Cannot find firmware: %s\n", - primary_fw_name); - return -ENOENT; - } - - /* Load primary firmware */ - ret = spectrum_dl_image(hw, link, fw_entry->data, 0); - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR PFX "Primary firmware download failed\n"); - return ret; - } - - if (request_firmware(&fw_entry, secondary_fw_name, - &handle_to_dev(link)) != 0) { - printk(KERN_ERR PFX "Cannot find firmware: %s\n", - secondary_fw_name); - return -ENOENT; - } - - /* Load secondary firmware */ - ret = spectrum_dl_image(hw, link, fw_entry->data, 1); - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR PFX "Secondary firmware download failed\n"); - } - - return ret; -} - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int -spectrum_cs_hard_reset(struct orinoco_private *priv) +spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) { struct orinoco_pccard *card = priv->card; struct pcmcia_device *link = card->p_dev; - int err; - if (!hermes_present(&priv->hw)) { - /* The firmware needs to be reloaded */ - if (spectrum_dl_firmware(&priv->hw, link) != 0) { - printk(KERN_ERR PFX "Firmware download failed\n"); - err = -ENODEV; - } - } else { - /* Soft reset using COR and HCR */ - spectrum_reset(link, 0); - } - - return 0; + return spectrum_reset(link, idle); } /********************************************************************/ @@ -582,7 +182,9 @@ spectrum_cs_probe(struct pcmcia_device *link) struct orinoco_private *priv; struct orinoco_pccard *card; - dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset); + dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + spectrum_cs_hard_reset, + spectrum_cs_stop_firmware); if (! dev) return -ENOMEM; priv = netdev_priv(dev); @@ -593,7 +195,7 @@ spectrum_cs_probe(struct pcmcia_device *link) link->priv = dev; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = orinoco_interrupt; link->irq.Instance = dev; @@ -784,7 +386,7 @@ spectrum_cs_config(struct pcmcia_device *link) dev->irq = link->irq.AssignedIRQ; card->node.major = card->node.minor = 0; - /* Reset card and download firmware */ + /* Reset card */ if (spectrum_cs_hard_reset(priv) != 0) { goto failed; } diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 00a3559e5aa..b5de38a9b79 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -4496,7 +4496,7 @@ wavelan_probe(struct pcmcia_device *p_dev) p_dev->io.IOAddrLines = 3; /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; p_dev->irq.Handler = wavelan_interrupt; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 377141995e3..74a5ad2f122 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -79,7 +79,7 @@ static int pc_debug = PCMCIA_DEBUG; module_param(pc_debug, int, 0); #define dprintk(n, format, args...) \ { if (pc_debug > (n)) \ - printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##args); } + printk(KERN_INFO "%s: " format "\n", __func__ , ##args); } #else #define dprintk(n, format, args...) #endif @@ -470,7 +470,7 @@ static int wl3501_pwr_mgmt(struct wl3501_card *this, int suspend) spin_unlock_irqrestore(&this->lock, flags); rc = wait_event_interruptible(this->wait, this->sig_pwr_mgmt_confirm.status != 255); - printk(KERN_INFO "%s: %s status=%d\n", __FUNCTION__, + printk(KERN_INFO "%s: %s status=%d\n", __func__, suspend ? "suspend" : "resume", this->sig_pwr_mgmt_confirm.status); goto out; @@ -1199,7 +1199,7 @@ static int wl3501_reset_board(struct wl3501_card *this) } WL3501_NOPLOOP(10); } - printk(KERN_WARNING "%s: failed to reset the board!\n", __FUNCTION__); + printk(KERN_WARNING "%s: failed to reset the board!\n", __func__); rc = -ENODEV; out: return rc; @@ -1250,7 +1250,7 @@ static int wl3501_init_firmware(struct wl3501_card *this) out: return rc; fail: - printk(KERN_WARNING "%s: failed!\n", __FUNCTION__); + printk(KERN_WARNING "%s: failed!\n", __func__); goto out; } @@ -1917,7 +1917,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->io.IOAddrLines = 5; /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; p_dev->irq.Handler = wl3501_interrupt; diff --git a/drivers/net/wireless/zd1211rw/Makefile b/drivers/net/wireless/zd1211rw/Makefile index cc36126cee8..1907eafb9b1 100644 --- a/drivers/net/wireless/zd1211rw/Makefile +++ b/drivers/net/wireless/zd1211rw/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_ZD1211RW) += zd1211rw.o -zd1211rw-objs := zd_chip.o zd_ieee80211.o zd_mac.o \ +zd1211rw-objs := zd_chip.o zd_mac.o \ zd_rf_al2230.o zd_rf_rf2959.o \ zd_rf_al7230b.o zd_rf_uw2453.o \ zd_rf.o zd_usb.o diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 0acb5c34573..e0ac58b8ff1 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -28,7 +28,6 @@ #include "zd_def.h" #include "zd_chip.h" -#include "zd_ieee80211.h" #include "zd_mac.h" #include "zd_rf.h" diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.c b/drivers/net/wireless/zd1211rw/zd_ieee80211.c deleted file mode 100644 index d8dc41ec0e5..00000000000 --- a/drivers/net/wireless/zd1211rw/zd_ieee80211.c +++ /dev/null @@ -1,100 +0,0 @@ -/* ZD1211 USB-WLAN driver for Linux - * - * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> - * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * In the long term, we'll probably find a better way of handling regulatory - * requirements outside of the driver. - */ - -#include <linux/kernel.h> -#include <net/mac80211.h> - -#include "zd_ieee80211.h" -#include "zd_mac.h" - -struct channel_range { - u8 regdomain; - u8 start; - u8 end; /* exclusive (channel must be less than end) */ -}; - -static const struct channel_range channel_ranges[] = { - { ZD_REGDOMAIN_FCC, 1, 12 }, - { ZD_REGDOMAIN_IC, 1, 12 }, - { ZD_REGDOMAIN_ETSI, 1, 14 }, - { ZD_REGDOMAIN_JAPAN, 1, 14 }, - { ZD_REGDOMAIN_SPAIN, 1, 14 }, - { ZD_REGDOMAIN_FRANCE, 1, 14 }, - - /* Japan originally only had channel 14 available (see CHNL_ID 0x40 in - * 802.11). However, in 2001 the range was extended to include channels - * 1-13. The ZyDAS devices still use the old region code but are - * designed to allow the extra channel access in Japan. */ - { ZD_REGDOMAIN_JAPAN_ADD, 1, 15 }, -}; - -static const struct channel_range *zd_channel_range(u8 regdomain) -{ - int i; - for (i = 0; i < ARRAY_SIZE(channel_ranges); i++) { - const struct channel_range *range = &channel_ranges[i]; - if (range->regdomain == regdomain) - return range; - } - return NULL; -} - -#define CHAN_TO_IDX(chan) ((chan) - 1) - -static void unmask_bg_channels(struct ieee80211_hw *hw, - const struct channel_range *range, - struct ieee80211_supported_band *sband) -{ - u8 channel; - - for (channel = range->start; channel < range->end; channel++) { - struct ieee80211_channel *chan = - &sband->channels[CHAN_TO_IDX(channel)]; - chan->flags = 0; - } -} - -void zd_geo_init(struct ieee80211_hw *hw, u8 regdomain) -{ - struct zd_mac *mac = zd_hw_mac(hw); - const struct channel_range *range; - - dev_dbg(zd_mac_dev(mac), "regdomain %#02x\n", regdomain); - - range = zd_channel_range(regdomain); - if (!range) { - /* The vendor driver overrides the regulatory domain and - * allowed channel registers and unconditionally restricts - * available channels to 1-11 everywhere. Match their - * questionable behaviour only for regdomains which we don't - * recognise. */ - dev_warn(zd_mac_dev(mac), "Unrecognised regulatory domain: " - "%#02x. Defaulting to FCC.\n", regdomain); - range = zd_channel_range(ZD_REGDOMAIN_FCC); - } - - unmask_bg_channels(hw, range, &mac->band); -} - diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h deleted file mode 100644 index 26b79f19758..00000000000 --- a/drivers/net/wireless/zd1211rw/zd_ieee80211.h +++ /dev/null @@ -1,95 +0,0 @@ -/* ZD1211 USB-WLAN driver for Linux - * - * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> - * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ZD_IEEE80211_H -#define _ZD_IEEE80211_H - -#include <net/mac80211.h> - -/* Additional definitions from the standards. - */ - -#define ZD_REGDOMAIN_FCC 0x10 -#define ZD_REGDOMAIN_IC 0x20 -#define ZD_REGDOMAIN_ETSI 0x30 -#define ZD_REGDOMAIN_SPAIN 0x31 -#define ZD_REGDOMAIN_FRANCE 0x32 -#define ZD_REGDOMAIN_JAPAN_ADD 0x40 -#define ZD_REGDOMAIN_JAPAN 0x41 - -enum { - MIN_CHANNEL24 = 1, - MAX_CHANNEL24 = 14, -}; - -void zd_geo_init(struct ieee80211_hw *hw, u8 regdomain); - -#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80 - -struct ofdm_plcp_header { - u8 prefix[3]; - __le16 service; -} __attribute__((packed)); - -static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header) -{ - return header->prefix[0] & 0xf; -} - -/* The following defines give the encoding of the 4-bit rate field in the - * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to - * define the zd-rate values for OFDM. - * - * See the struct zd_ctrlset definition in zd_mac.h. - */ -#define ZD_OFDM_PLCP_RATE_6M 0xb -#define ZD_OFDM_PLCP_RATE_9M 0xf -#define ZD_OFDM_PLCP_RATE_12M 0xa -#define ZD_OFDM_PLCP_RATE_18M 0xe -#define ZD_OFDM_PLCP_RATE_24M 0x9 -#define ZD_OFDM_PLCP_RATE_36M 0xd -#define ZD_OFDM_PLCP_RATE_48M 0x8 -#define ZD_OFDM_PLCP_RATE_54M 0xc - -struct cck_plcp_header { - u8 signal; - u8 service; - __le16 length; - __le16 crc16; -} __attribute__((packed)); - -static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header) -{ - return header->signal; -} - -/* These defines give the encodings of the signal field in the 802.11b PLCP - * header. The signal field gives the bit rate of the following packet. Even - * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s - * rate to stay consistent with Zydas and our use of the term. - * - * Notify that these values are *not* used in the zd-rates. - */ -#define ZD_CCK_PLCP_SIGNAL_1M 0x0a -#define ZD_CCK_PLCP_SIGNAL_2M 0x14 -#define ZD_CCK_PLCP_SIGNAL_5M5 0x37 -#define ZD_CCK_PLCP_SIGNAL_11M 0x6e - -#endif /* _ZD_IEEE80211_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 4d7b98b0503..fe1867b25ff 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -3,7 +3,7 @@ * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net> - * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,9 +29,23 @@ #include "zd_def.h" #include "zd_chip.h" #include "zd_mac.h" -#include "zd_ieee80211.h" #include "zd_rf.h" +struct zd_reg_alpha2_map { + u32 reg; + char alpha2[2]; +}; + +static struct zd_reg_alpha2_map reg_alpha2_map[] = { + { ZD_REGDOMAIN_FCC, "US" }, + { ZD_REGDOMAIN_IC, "CA" }, + { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */ + { ZD_REGDOMAIN_JAPAN, "JP" }, + { ZD_REGDOMAIN_JAPAN_ADD, "JP" }, + { ZD_REGDOMAIN_SPAIN, "ES" }, + { ZD_REGDOMAIN_FRANCE, "FR" }, +}; + /* This table contains the hardware specific values for the modulation rates. */ static const struct ieee80211_rate zd_rates[] = { { .bitrate = 10, @@ -95,6 +109,21 @@ static void housekeeping_init(struct zd_mac *mac); static void housekeeping_enable(struct zd_mac *mac); static void housekeeping_disable(struct zd_mac *mac); +static int zd_reg2alpha2(u8 regdomain, char *alpha2) +{ + unsigned int i; + struct zd_reg_alpha2_map *reg_map; + for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) { + reg_map = ®_alpha2_map[i]; + if (regdomain == reg_map->reg) { + alpha2[0] = reg_map->alpha2[0]; + alpha2[1] = reg_map->alpha2[1]; + return 0; + } + } + return 1; +} + int zd_mac_preinit_hw(struct ieee80211_hw *hw) { int r; @@ -115,6 +144,7 @@ int zd_mac_init_hw(struct ieee80211_hw *hw) int r; struct zd_mac *mac = zd_hw_mac(hw); struct zd_chip *chip = &mac->chip; + char alpha2[2]; u8 default_regdomain; r = zd_chip_enable_int(chip); @@ -139,7 +169,9 @@ int zd_mac_init_hw(struct ieee80211_hw *hw) if (r) goto disable_int; - zd_geo_init(hw, mac->regdomain); + r = zd_reg2alpha2(mac->regdomain, alpha2); + if (!r) + regulatory_hint(hw->wiphy, alpha2, NULL); r = 0; disable_int: @@ -579,7 +611,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, q = &zd_hw_mac(hw)->ack_wait_queue; spin_lock_irqsave(&q->lock, flags); - for (skb = q->next; skb != (struct sk_buff *)q; skb = skb->next) { + skb_queue_walk(q, skb) { struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; @@ -684,15 +716,15 @@ static int zd_op_add_interface(struct ieee80211_hw *hw, { struct zd_mac *mac = zd_hw_mac(hw); - /* using IEEE80211_IF_TYPE_INVALID to indicate no mode selected */ - if (mac->type != IEEE80211_IF_TYPE_INVALID) + /* using NL80211_IFTYPE_UNSPECIFIED to indicate no mode selected */ + if (mac->type != NL80211_IFTYPE_UNSPECIFIED) return -EOPNOTSUPP; switch (conf->type) { - case IEEE80211_IF_TYPE_MNTR: - case IEEE80211_IF_TYPE_MESH_POINT: - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: mac->type = conf->type; break; default: @@ -706,7 +738,7 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct zd_mac *mac = zd_hw_mac(hw); - mac->type = IEEE80211_IF_TYPE_INVALID; + mac->type = NL80211_IFTYPE_UNSPECIFIED; zd_set_beacon_interval(&mac->chip, 0); zd_write_mac_addr(&mac->chip, NULL); } @@ -725,8 +757,8 @@ static int zd_op_config_interface(struct ieee80211_hw *hw, int associated; int r; - if (mac->type == IEEE80211_IF_TYPE_MESH_POINT || - mac->type == IEEE80211_IF_TYPE_IBSS) { + if (mac->type == NL80211_IFTYPE_MESH_POINT || + mac->type == NL80211_IFTYPE_ADHOC) { associated = true; if (conf->changed & IEEE80211_IFCC_BEACON) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); @@ -753,7 +785,7 @@ static int zd_op_config_interface(struct ieee80211_hw *hw, return 0; } -void zd_process_intr(struct work_struct *work) +static void zd_process_intr(struct work_struct *work) { u16 int_status; struct zd_mac *mac = container_of(work, struct zd_mac, process_intr); @@ -923,7 +955,7 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) spin_lock_init(&mac->lock); mac->hw = hw; - mac->type = IEEE80211_IF_TYPE_INVALID; + mac->type = NL80211_IFTYPE_UNSPECIFIED; memcpy(mac->channels, zd_channels, sizeof(zd_channels)); memcpy(mac->rates, zd_rates, sizeof(zd_rates)); @@ -937,6 +969,11 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DB; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + hw->max_signal = 100; hw->queues = 1; hw->extra_tx_headroom = sizeof(struct zd_ctrlset); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h index 18c1d56d3dd..4c05d3ee4c3 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.h +++ b/drivers/net/wireless/zd1211rw/zd_mac.h @@ -25,7 +25,6 @@ #include <net/mac80211.h> #include "zd_chip.h" -#include "zd_ieee80211.h" struct zd_ctrlset { u8 modulation; @@ -187,6 +186,70 @@ struct zd_mac { unsigned int pass_ctrl:1; }; +#define ZD_REGDOMAIN_FCC 0x10 +#define ZD_REGDOMAIN_IC 0x20 +#define ZD_REGDOMAIN_ETSI 0x30 +#define ZD_REGDOMAIN_SPAIN 0x31 +#define ZD_REGDOMAIN_FRANCE 0x32 +#define ZD_REGDOMAIN_JAPAN_ADD 0x40 +#define ZD_REGDOMAIN_JAPAN 0x41 + +enum { + MIN_CHANNEL24 = 1, + MAX_CHANNEL24 = 14, +}; + +#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80 + +struct ofdm_plcp_header { + u8 prefix[3]; + __le16 service; +} __attribute__((packed)); + +static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header) +{ + return header->prefix[0] & 0xf; +} + +/* The following defines give the encoding of the 4-bit rate field in the + * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to + * define the zd-rate values for OFDM. + * + * See the struct zd_ctrlset definition in zd_mac.h. + */ +#define ZD_OFDM_PLCP_RATE_6M 0xb +#define ZD_OFDM_PLCP_RATE_9M 0xf +#define ZD_OFDM_PLCP_RATE_12M 0xa +#define ZD_OFDM_PLCP_RATE_18M 0xe +#define ZD_OFDM_PLCP_RATE_24M 0x9 +#define ZD_OFDM_PLCP_RATE_36M 0xd +#define ZD_OFDM_PLCP_RATE_48M 0x8 +#define ZD_OFDM_PLCP_RATE_54M 0xc + +struct cck_plcp_header { + u8 signal; + u8 service; + __le16 length; + __le16 crc16; +} __attribute__((packed)); + +static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header) +{ + return header->signal; +} + +/* These defines give the encodings of the signal field in the 802.11b PLCP + * header. The signal field gives the bit rate of the following packet. Even + * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s + * rate to stay consistent with Zydas and our use of the term. + * + * Notify that these values are *not* used in the zd-rates. + */ +#define ZD_CCK_PLCP_SIGNAL_1M 0x0a +#define ZD_CCK_PLCP_SIGNAL_2M 0x14 +#define ZD_CCK_PLCP_SIGNAL_5M5 0x37 +#define ZD_CCK_PLCP_SIGNAL_11M 0x6e + static inline struct zd_mac *zd_hw_mac(struct ieee80211_hw *hw) { return hw->priv; diff --git a/drivers/net/wireless/zd1211rw/zd_rf.c b/drivers/net/wireless/zd1211rw/zd_rf.c index ec412931281..7207bfd2e6c 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf.c +++ b/drivers/net/wireless/zd1211rw/zd_rf.c @@ -23,7 +23,7 @@ #include "zd_def.h" #include "zd_rf.h" -#include "zd_ieee80211.h" +#include "zd_mac.h" #include "zd_chip.h" static const char * const rfs[] = { diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index da8b7433e3a..a60ae86bd5c 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -58,6 +58,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, |