diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/rt2x00/Kconfig | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00.h | 39 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00crypto.c | 215 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00debug.c | 97 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 30 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00lib.h | 47 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00mac.c | 110 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.c | 81 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.h | 73 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00reg.h | 19 |
11 files changed, 686 insertions, 30 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index d485a86bba7..2f60e175f03 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -33,6 +33,10 @@ config RT2X00_LIB_FIRMWARE depends on RT2X00_LIB select FW_LOADER +config RT2X00_LIB_CRYPTO + boolean + depends on RT2X00_LIB + config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 1087dbcf1a0..917cb4f3b03 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -3,6 +3,7 @@ rt2x00lib-y += rt2x00mac.o rt2x00lib-y += rt2x00config.o rt2x00lib-y += rt2x00queue.o rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o +rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 82c28dcc471..0ffd972bb85 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -452,6 +452,23 @@ struct rt2x00lib_erp { }; /* + * Configuration structure for hardware encryption. + */ +struct rt2x00lib_crypto { + enum cipher cipher; + + enum set_key_cmd cmd; + const u8 *address; + + u32 bssidx; + u32 aid; + + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +}; + +/* * Configuration structure wrapper around the * rt2x00 interface configuration handler. */ @@ -547,6 +564,12 @@ struct rt2x00lib_ops { /* * Configuration handlers. */ + int (*config_shared_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); + int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); void (*config_filter) (struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags); void (*config_intf) (struct rt2x00_dev *rt2x00dev, @@ -609,7 +632,7 @@ enum rt2x00_flags { DEVICE_DIRTY_CONFIG, /* - * Driver features + * Driver requirements */ DRIVER_REQUIRE_FIRMWARE, DRIVER_REQUIRE_BEACON_GUARD, @@ -618,9 +641,14 @@ enum rt2x00_flags { DRIVER_REQUIRE_DMA, /* - * Driver configuration + * Driver features */ CONFIG_SUPPORT_HW_BUTTON, + CONFIG_SUPPORT_HW_CRYPTO, + + /* + * Driver configuration + */ CONFIG_FRAME_TYPE, CONFIG_RF_SEQUENCE, CONFIG_EXTERNAL_LNA_A, @@ -966,6 +994,13 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, int mc_count, struct dev_addr_list *mc_list); +#ifdef CONFIG_RT2X00_LIB_CRYPTO +int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key); +#else +#define rt2x00mac_set_key NULL +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c new file mode 100644 index 00000000000..e1448cfa944 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -0,0 +1,215 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 crypto specific routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) +{ + switch (key->alg) { + case ALG_WEP: + if (key->keylen == LEN_WEP40) + return CIPHER_WEP64; + else + return CIPHER_WEP128; + case ALG_TKIP: + return CIPHER_TKIP; + case ALG_CCMP: + return CIPHER_AES; + default: + return CIPHER_NONE; + } +} + +unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +{ + struct ieee80211_key_conf *key = tx_info->control.hw_key; + unsigned int overhead = 0; + + /* + * Extend frame length to include IV/EIV/ICV/MMIC, + * note that these lengths should only be added when + * mac80211 does not generate it. + */ + overhead += tx_info->control.icv_len; + + if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + overhead += tx_info->control.iv_len; + + if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) { + if (key->alg == ALG_TKIP) + overhead += 8; + } + + return overhead; +} + +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + + if (unlikely(!iv_len)) + return; + + /* Copy IV/EIV data */ + if (iv_len >= 4) + memcpy(&skbdesc->iv, skb->data + header_length, 4); + if (iv_len >= 8) + memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4); + + /* Move ieee80211 header */ + memmove(skb->data + iv_len, skb->data, header_length); + + /* Pull buffer to correct size */ + skb_pull(skb, iv_len); + + /* IV/EIV data has officially be stripped */ + skbdesc->flags |= FRAME_DESC_IV_STRIPPED; +} + +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + const unsigned int iv_len = + ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4); + + if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED)) + return; + + skb_push(skb, iv_len); + + /* Move ieee80211 header */ + memmove(skb->data, skb->data + iv_len, header_length); + + /* Copy IV/EIV data */ + if (iv_len >= 4) + memcpy(skb->data + header_length, &skbdesc->iv, 4); + if (iv_len >= 8) + memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4); + + /* IV/EIV data has returned into the frame */ + skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED; +} + +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc) +{ + unsigned int payload_len = rxdesc->size - header_length; + unsigned int iv_len; + unsigned int icv_len; + unsigned int transfer = 0; + + /* + * WEP64/WEP128: Provides IV & ICV + * TKIP: Provides IV/EIV & ICV + * AES: Provies IV/EIV & ICV + */ + switch (rxdesc->cipher) { + case CIPHER_WEP64: + case CIPHER_WEP128: + iv_len = 4; + icv_len = 4; + break; + case CIPHER_TKIP: + iv_len = 8; + icv_len = 4; + break; + case CIPHER_AES: + iv_len = 8; + icv_len = 8; + break; + default: + /* Unsupport type */ + return; + } + + /* + * Make room for new data, note that we increase both + * headsize and tailsize when required. The tailsize is + * only needed when ICV data needs to be inserted and + * the padding is smaller then the ICV data. + * When alignment requirements is greater then the + * ICV data we must trim the skb to the correct size + * because we need to remove the extra bytes. + */ + skb_push(skb, iv_len + align); + if (align < icv_len) + skb_put(skb, icv_len - align); + else if (align > icv_len) + skb_trim(skb, rxdesc->size + iv_len + icv_len); + + /* Move ieee80211 header */ + memmove(skb->data + transfer, + skb->data + transfer + iv_len + align, + header_length); + transfer += header_length; + + /* Copy IV data */ + if (iv_len >= 4) { + memcpy(skb->data + transfer, &rxdesc->iv, 4); + transfer += 4; + } + + /* Copy EIV data */ + if (iv_len >= 8) { + memcpy(skb->data + transfer, &rxdesc->eiv, 4); + transfer += 4; + } + + /* Move payload */ + if (align) { + memmove(skb->data + transfer, + skb->data + transfer + align, + payload_len); + } + + /* + * NOTE: Always count the payload as transfered, + * even when alignment was set to zero. This is required + * for determining the correct offset for the ICV data. + */ + transfer += payload_len; + + /* Copy ICV data */ + if (icv_len >= 4) { + memcpy(skb->data + transfer, &rxdesc->icv, 4); + /* + * AES appends 8 bytes, we can't fill the upper + * 4 bytes, but mac80211 doesn't care about what + * we provide here anyway and strips it immediately. + */ + transfer += icv_len; + } + + /* IV/EIV/ICV has been inserted into frame */ + rxdesc->size = transfer; + rxdesc->flags &= ~RX_FLAG_IV_STRIPPED; +} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 6bee1d611bb..5cf4c859e39 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -35,6 +35,13 @@ #define MAX_LINE_LENGTH 64 +struct rt2x00debug_crypto { + unsigned long success; + unsigned long icv_error; + unsigned long mic_error; + unsigned long key_error; +}; + struct rt2x00debug_intf { /* * Pointer to driver structure where @@ -63,6 +70,7 @@ struct rt2x00debug_intf { * - queue folder * - frame dump file * - queue stats file + * - crypto stats file */ struct dentry *driver_folder; struct dentry *driver_entry; @@ -80,6 +88,7 @@ struct rt2x00debug_intf { struct dentry *queue_folder; struct dentry *queue_frame_dump_entry; struct dentry *queue_stats_entry; + struct dentry *crypto_stats_entry; /* * The frame dump file only allows a single reader, @@ -98,6 +107,12 @@ struct rt2x00debug_intf { wait_queue_head_t frame_dump_waitqueue; /* + * HW crypto statistics. + * All statistics are stored seperately per cipher type. + */ + struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; + + /* * Driver and chipset files will use a data buffer * that has been created in advance. This will simplify * the code since we can use the debugfs functions. @@ -114,6 +129,25 @@ struct rt2x00debug_intf { unsigned int offset_rf; }; +void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, enum rx_crypto status) +{ + struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; + + if (cipher == CIPHER_TKIP_NO_MIC) + cipher = CIPHER_TKIP; + if (cipher == CIPHER_NONE || cipher > CIPHER_MAX) + return; + + /* Remove CIPHER_NONE index */ + cipher--; + + intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS); + intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV); + intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC); + intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY); +} + void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb) { @@ -327,6 +361,59 @@ static const struct file_operations rt2x00debug_fop_queue_stats = { .release = rt2x00debug_file_release, }; +#ifdef CONFIG_RT2X00_LIB_CRYPTO +static ssize_t rt2x00debug_read_crypto_stats(struct file *file, + char __user *buf, + size_t length, + loff_t *offset) +{ + struct rt2x00debug_intf *intf = file->private_data; + char *name[] = { "WEP64", "WEP128", "TKIP", "AES" }; + char *data; + char *temp; + size_t size; + unsigned int i; + + if (*offset) + return 0; + + data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL); + if (!data) + return -ENOMEM; + + temp = data; + temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n"); + + for (i = 0; i < CIPHER_MAX; i++) { + temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i], + intf->crypto_stats[i].success, + intf->crypto_stats[i].icv_error, + intf->crypto_stats[i].mic_error, + intf->crypto_stats[i].key_error); + } + + size = strlen(data); + size = min(size, length); + + if (copy_to_user(buf, data, size)) { + kfree(data); + return -EFAULT; + } + + kfree(data); + + *offset += size; + return size; +} + +static const struct file_operations rt2x00debug_fop_crypto_stats = { + .owner = THIS_MODULE, + .read = rt2x00debug_read_crypto_stats, + .open = rt2x00debug_file_open, + .release = rt2x00debug_file_release, +}; +#endif + #define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ static ssize_t rt2x00debug_read_##__name(struct file *file, \ char __user *buf, \ @@ -569,6 +656,13 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) debugfs_create_file("queue", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_stats); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + intf->crypto_stats_entry = + debugfs_create_file("crypto", S_IRUGO, intf->queue_folder, + intf, &rt2x00debug_fop_crypto_stats); +#endif + return; exit: @@ -587,6 +681,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) skb_queue_purge(&intf->frame_dump_skbqueue); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + debugfs_remove(intf->crypto_stats_entry); +#endif debugfs_remove(intf->queue_stats_entry); debugfs_remove(intf->queue_frame_dump_entry); debugfs_remove(intf->queue_folder); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index f42283ad7b0..182952249a1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -508,6 +508,15 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00queue_unmap_skb(rt2x00dev, entry->skb); /* + * If the IV/EIV data was stripped from the frame before it was + * passed to the hardware, we should now reinsert it again because + * mac80211 will expect the the same data to be present it the + * frame as it was passed to us. + */ + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + rt2x00crypto_tx_insert_iv(entry->skb); + + /* * Send frame to debugfs immediately, after this call is completed * we are going to overwrite the skb->cb array. */ @@ -585,7 +594,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; - unsigned int header_size; + unsigned int header_length; unsigned int align; unsigned int i; int idx = -1; @@ -613,10 +622,19 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ - header_size = ieee80211_get_hdrlen_from_skb(entry->skb); - align = ((unsigned long)(entry->skb->data + header_size)) & 3; + header_length = ieee80211_get_hdrlen_from_skb(entry->skb); + align = ((unsigned long)(entry->skb->data + header_length)) & 3; - if (align) { + /* + * Hardware might have stripped the IV/EIV/ICV data, + * in that case it is possible that the data was + * provided seperately (through hardware descriptor) + * in which case we should reinsert the data into the frame. + */ + if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) { + rt2x00crypto_rx_insert_iv(entry->skb, align, + header_length, &rxdesc); + } else if (align) { skb_push(entry->skb, align); /* Move entire frame in 1 command */ memmove(entry->skb->data, entry->skb->data + align, @@ -657,6 +675,10 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, (rxdesc.dev_flags & RXDONE_MY_BSS)) rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); + rt2x00debug_update_crypto(rt2x00dev, + rxdesc.cipher, + rxdesc.cipher_status); + rt2x00dev->link.qual.rx_success++; rx_status->mactime = rxdesc.timestamp; diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index c5fb3a72cf3..7bbc16b1b6c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -181,6 +181,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb); +void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, enum rx_crypto status); #else static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) { @@ -195,9 +197,54 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { } + +static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, + enum rx_crypto status) +{ +} #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ /* + * Crypto handlers. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO +enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); +unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info); +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc); +#else +static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) +{ + return CIPHER_NONE; +} + +static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +{ + return 0; +} + +static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, + unsigned int iv_len) +{ +} + +static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +{ +} + +static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, + unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc) +{ +} +#endif + +/* * RFkill handlers. */ #ifdef CONFIG_RT2X00_LIB_RFKILL diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 4b9fde903cd..3af42733941 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -36,22 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb); struct ieee80211_tx_info *rts_info; struct sk_buff *skb; - int size; + unsigned int data_length; int retval = 0; if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) - size = sizeof(struct ieee80211_cts); + data_length = sizeof(struct ieee80211_cts); else - size = sizeof(struct ieee80211_rts); + data_length = sizeof(struct ieee80211_rts); - skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom); + skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom); if (unlikely(!skb)) { WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n"); return -ENOMEM; } skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); - skb_put(skb, size); + skb_put(skb, data_length); /* * Copy TX information over from original frame to @@ -64,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; @@ -74,13 +73,24 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; + skb->do_not_encrypt = 1; + + /* + * RTS/CTS frame should use the length of the frame plus any + * encryption overhead that will be added by the hardware. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (!frag_skb->do_not_encrypt) + data_length += rt2x00crypto_tx_overhead(tx_info); +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, size, tx_info, + frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); else ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, size, tx_info, + frag_skb->data, data_length, tx_info, (struct ieee80211_rts *)(skb->data)); retval = rt2x00queue_write_tx_frame(queue, skb); @@ -464,6 +474,90 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); +#ifdef CONFIG_RT2X00_LIB_CRYPTO +int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + int (*set_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); + struct rt2x00lib_crypto crypto; + + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + return -EOPNOTSUPP; + else if (key->keylen > 32) + return -ENOSPC; + + memset(&crypto, 0, sizeof(crypto)); + + /* + * When in STA mode, bssidx is always 0 otherwise local_address[5] + * contains the bss number, see BSS_ID_MASK comments for details. + */ + if (rt2x00dev->intf_sta_count) + crypto.bssidx = 0; + else + crypto.bssidx = + local_address[5] & (rt2x00dev->ops->max_ap_intf - 1); + + crypto.cipher = rt2x00crypto_key_to_cipher(key); + if (crypto.cipher == CIPHER_NONE) + return -EOPNOTSUPP; + + crypto.cmd = cmd; + crypto.address = address; + + if (crypto.cipher == CIPHER_TKIP) { + if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) + memcpy(&crypto.key, + &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], + sizeof(crypto.key)); + + if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) + memcpy(&crypto.tx_mic, + &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + sizeof(crypto.tx_mic)); + + if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) + memcpy(&crypto.rx_mic, + &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + sizeof(crypto.rx_mic)); + } else + memcpy(&crypto.key, &key->key[0], key->keylen); + + /* + * Each BSS has a maximum of 4 shared keys. + * Shared key index values: + * 0) BSS0 key0 + * 1) BSS0 key1 + * ... + * 4) BSS1 key0 + * ... + * 8) BSS2 key0 + * ... + * Both pairwise as shared key indeces are determined by + * driver. This is required because the hardware requires + * keys to be assigned in correct order (When key 1 is + * provided but key 0 is not, then the key is not found + * by the hardware during RX). + */ + key->hw_key_idx = 0; + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + set_key = rt2x00dev->ops->lib->config_pairwise_key; + else + set_key = rt2x00dev->ops->lib->config_shared_key; + + if (!set_key) + return -EOPNOTSUPP; + + return set_key(rt2x00dev, &crypto, key); +} +EXPORT_SYMBOL_GPL(rt2x00mac_set_key); +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 898cdd7f57d..c0f97c53e5c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -33,10 +33,11 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - unsigned int frame_size; - unsigned int reserved_size; struct sk_buff *skb; struct skb_frame_desc *skbdesc; + unsigned int frame_size; + unsigned int head_size = 0; + unsigned int tail_size = 0; /* * The frame size includes descriptor size, because the @@ -49,16 +50,32 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, * this means we need at least 3 bytes for moving the frame * into the correct offset. */ - reserved_size = 4; + head_size = 4; + + /* + * For IV/EIV/ICV assembly we must make sure there is + * at least 8 bytes bytes available in headroom for IV/EIV + * and 4 bytes for ICV data as tailroon. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + head_size += 8; + tail_size += 4; + } +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* * Allocate skbuffer. */ - skb = dev_alloc_skb(frame_size + reserved_size); + skb = dev_alloc_skb(frame_size + head_size + tail_size); if (!skb) return NULL; - skb_reserve(skb, reserved_size); + /* + * Make sure we not have a frame with the requested bytes + * available in the head and tail. + */ + skb_reserve(skb, head_size); skb_put(skb, frame_size); /* @@ -140,7 +157,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; - /* Data length should be extended with 4 bytes for CRC */ + /* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */ data_length = entry->skb->len + 4; /* @@ -149,6 +166,35 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) __set_bit(ENTRY_TXD_ACK, &txdesc->flags); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) && + !entry->skb->do_not_encrypt) { + struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; + + __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); + + txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); + + if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); + + txdesc->key_idx = hw_key->hw_key_idx; + txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + + /* + * Extend frame length to include all encryption overhead + * that will be added by the hardware. + */ + data_length += rt2x00crypto_tx_overhead(tx_info); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) + __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); + } +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + /* * Check if this is a RTS/CTS frame */ @@ -305,6 +351,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; + unsigned int iv_len = IEEE80211_SKB_CB(skb)->control.iv_len; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; @@ -326,15 +373,33 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) rt2x00queue_create_tx_descriptor(entry, &txdesc); /* - * skb->cb array is now ours and we are free to use it. + * All information is retreived from the skb->cb array, + * now we should claim ownership of the driver part of that + * array. */ skbdesc = get_skb_frame_desc(entry->skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + /* + * When hardware encryption is supported, and this frame + * is to be encrypted, we should strip the IV/EIV data from + * the frame so we can provide it to the driver seperately. + */ + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) + rt2x00crypto_tx_remove_iv(skb, iv_len); + + /* + * It could be possible that the queue was corrupted and this + * call failed. Just drop the frame, we cannot rollback and pass + * the frame to mac80211 because the skb->cb has now been tainted. + */ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - return -EIO; + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; + return 0; } if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index ff78e52ce43..37f3f98d58a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -87,10 +87,13 @@ enum data_queue_qid { * * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX + * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by + * mac80211 but was stripped for processing by the driver. */ enum skb_frame_desc_flags { - SKBDESC_DMA_MAPPED_RX = (1 << 0), - SKBDESC_DMA_MAPPED_TX = (1 << 1), + SKBDESC_DMA_MAPPED_RX = 1 << 0, + SKBDESC_DMA_MAPPED_TX = 1 << 1, + FRAME_DESC_IV_STRIPPED = 1 << 2, }; /** @@ -104,6 +107,8 @@ enum skb_frame_desc_flags { * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. + * @iv: IV data used during encryption/decryption. + * @eiv: EIV data used during encryption/decryption. * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ @@ -113,6 +118,9 @@ struct skb_frame_desc { unsigned int desc_len; void *desc; + __le32 iv; + __le32 eiv; + dma_addr_t skb_dma; struct queue_entry *entry; @@ -152,7 +160,11 @@ enum rxdone_entry_desc_flags { * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). - + * @cipher: Cipher type used during decryption. + * @cipher_status: Decryption status. + * @iv: IV data used during decryption. + * @eiv: EIV data used during decryption. + * @icv: ICV data used during decryption. */ struct rxdone_entry_desc { u64 timestamp; @@ -161,6 +173,12 @@ struct rxdone_entry_desc { int size; int flags; int dev_flags; + u8 cipher; + u8 cipher_status; + + __le32 iv; + __le32 eiv; + __le32 icv; }; /** @@ -206,6 +224,10 @@ struct txdone_entry_desc { * @ENTRY_TXD_BURST: This frame belongs to the same burst event. * @ENTRY_TXD_ACK: An ACK is required for this frame. * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used. + * @ENTRY_TXD_ENCRYPT: This frame should be encrypted. + * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). + * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. + * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, @@ -218,6 +240,10 @@ enum txentry_desc_flags { ENTRY_TXD_BURST, ENTRY_TXD_ACK, ENTRY_TXD_RETRY_MODE, + ENTRY_TXD_ENCRYPT, + ENTRY_TXD_ENCRYPT_PAIRWISE, + ENTRY_TXD_ENCRYPT_IV, + ENTRY_TXD_ENCRYPT_MMIC, }; /** @@ -236,6 +262,9 @@ enum txentry_desc_flags { * @ifs: IFS value. * @cw_min: cwmin value. * @cw_max: cwmax value. + * @cipher: Cipher type used for encryption. + * @key_idx: Key index used for encryption. + * @iv_offset: Position where IV should be inserted by hardware. */ struct txentry_desc { unsigned long flags; @@ -252,6 +281,10 @@ struct txentry_desc { short ifs; short cw_min; short cw_max; + + enum cipher cipher; + u16 key_idx; + u16 iv_offset; }; /** @@ -484,25 +517,51 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) } /** - * rt2x00_desc_read - Read a word from the hardware descriptor. + * _rt2x00_desc_read - Read a word from the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be read. + * @value: Address where the descriptor value should be written into. + */ +static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value) +{ + *value = desc[word]; +} + +/** + * rt2x00_desc_read - Read a word from the hardware descriptor, this + * function will take care of the byte ordering. * @desc: Base descriptor address * @word: Word index from where the descriptor should be read. * @value: Address where the descriptor value should be written into. */ static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value) { - *value = le32_to_cpu(desc[word]); + __le32 tmp; + _rt2x00_desc_read(desc, word, &tmp); + *value = le32_to_cpu(tmp); +} + +/** + * rt2x00_desc_write - write a word to the hardware descriptor, this + * function will take care of the byte ordering. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be written. + * @value: Value that should be written into the descriptor. + */ +static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value) +{ + desc[word] = value; } /** - * rt2x00_desc_write - wrote a word to the hardware descriptor. + * rt2x00_desc_write - write a word to the hardware descriptor. * @desc: Base descriptor address * @word: Word index from where the descriptor should be written. * @value: Value that should be written into the descriptor. */ static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) { - desc[word] = cpu_to_le32(value); + _rt2x00_desc_write(desc, word, cpu_to_le32(value)); } #endif /* RT2X00QUEUE_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 7e88ce5651b..6d5acf99a1c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -27,6 +27,16 @@ #define RT2X00REG_H /* + * RX crypto status + */ +enum rx_crypto { + RX_CRYPTO_SUCCESS = 0, + RX_CRYPTO_FAIL_ICV = 1, + RX_CRYPTO_FAIL_MIC = 2, + RX_CRYPTO_FAIL_KEY = 3, +}; + +/* * Antenna values */ enum antenna { @@ -104,7 +114,14 @@ enum cipher { */ CIPHER_CKIP64 = 5, CIPHER_CKIP128 = 6, - CIPHER_TKIP_NO_MIC = 7, + CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */ + +/* + * Max cipher type. + * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128 + * are excluded due to limitations in mac80211. + */ + CIPHER_MAX = 4, }; /* |