5 files changed, 28 insertions, 36 deletions

diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index caf569401a3..00a0eaa0886 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -209,6 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	unsigned int curlen;
 	struct ath_txq *cabq;
 	struct ath_txq *mcastq;
+	struct ieee80211_tx_info *info;
 	avp = sc->sc_vaps[if_id];
 
 	mcastq = &avp->av_mcastq;
@@ -232,6 +233,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	 */
 	curlen = skb->len;
 
+	info = IEEE80211_SKB_CB(skb);
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		/*
+		 * TODO: make sure the seq# gets assigned properly (vs. other
+		 * TX frames)
+		 */
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
+
 	/* XXX: spin_lock_bh should not be used here, but sparse bitches
 	 * otherwise. We should fix sparse :) */
 	spin_lock_bh(&mcastq->axq_lock);
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 673b3d81133..4ee695b76b8 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -992,6 +992,7 @@ struct ath_softc {
 	u32 sc_txintrperiod;	/* tx interrupt batching */
 	int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME	AC -> h/w qnum */
 	u32 sc_ant_tx[8];	/* recent tx frames/antenna */
+	u16 seq_no; /* TX sequence number */
 
 	/* Beacon */
 	struct ath9k_tx_queue_info sc_beacon_qi;
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index c5107f269f2..99badf1404c 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -369,6 +369,20 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 {
 	struct ath_softc *sc = hw->priv;
 	int hdrlen, padsize;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	/*
+	 * As a temporary workaround, assign seq# here; this will likely need
+	 * to be cleaned up to work better with Beacon transmission and virtual
+	 * BSSes.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
 
 	/* Add the padding after the header if this is not already done */
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index fec5645944a..34ae125d538 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -43,23 +43,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 	return 0;
 }
 
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!dev->radio_hw_enable) {
-		rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
-		return;
-	}
-
-	if (!dev->phy.radio_on)
-		rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
-	else
-		rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
 /* The poll callback for the hardware button. */
 static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
 {
@@ -77,7 +60,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
 		report_change = 1;
-		b43_rfkill_update_state(dev);
 		b43info(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
 	}
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index 476add97e97..b32bf6a94f1 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -44,23 +44,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 	return 0;
 }
 
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!dev->radio_hw_enable) {
-		rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
-		return;
-	}
-
-	if (!dev->phy.radio_on)
-		rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
-	else
-		rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
 /* The poll callback for the hardware button. */
 static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
 {
@@ -78,7 +61,6 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
 		report_change = 1;
-		b43legacy_rfkill_update_state(dev);
 		b43legacyinfo(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
 	}