diff options
Diffstat (limited to 'drivers/net/wireless')
55 files changed, 56285 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig new file mode 100644 index 00000000000..0aaa12c0c09 --- /dev/null +++ b/drivers/net/wireless/Kconfig @@ -0,0 +1,365 @@ +# +# Wireless LAN device configuration +# + +menu "Wireless LAN (non-hamradio)" + depends on NETDEVICES + +config NET_RADIO + bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" + ---help--- + Support for wireless LANs and everything having to do with radio, + but not with amateur radio or FM broadcasting. + + Saying Y here also enables the Wireless Extensions (creates + /proc/net/wireless and enables iwconfig access). The Wireless + Extension is a generic API allowing a driver to expose to the user + space configuration and statistics specific to common Wireless LANs. + The beauty of it is that a single set of tool can support all the + variations of Wireless LANs, regardless of their type (as long as + the driver supports Wireless Extension). Another advantage is that + these parameters may be changed on the fly without restarting the + driver (or Linux). If you wish to use Wireless Extensions with + wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch + the tools from + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + Some user-level drivers for scarab devices which don't require + special kernel support are available from + <ftp://shadow.cabi.net/pub/Linux/>. + +# Note : the cards are obsolete (can't buy them anymore), but the drivers +# are not, as people are still using them... +comment "Obsolete Wireless cards support (pre-802.11)" + depends on NET_RADIO && (INET || ISA || PCMCIA) + +config STRIP + tristate "STRIP (Metricom starmode radio IP)" + depends on NET_RADIO && INET + ---help--- + Say Y if you have a Metricom radio and intend to use Starmode Radio + IP. STRIP is a radio protocol developed for the MosquitoNet project + (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet + traffic using Metricom radios. Metricom radios are small, battery + powered, 100kbit/sec packet radio transceivers, about the size and + weight of a cellular telephone. (You may also have heard them called + "Metricom modems" but we avoid the term "modem" because it misleads + many people into thinking that you can plug a Metricom modem into a + phone line and use it as a modem.) + + You can use STRIP on any Linux machine with a serial port, although + it is obviously most useful for people with laptop computers. If you + think you might get a Metricom radio in the future, there is no harm + in saying Y to STRIP now, except that it makes the kernel a bit + bigger. + + To compile this as a module, choose M here: the module will be + called strip. + +config ARLAN + tristate "Aironet Arlan 655 & IC2200 DS support" + depends on NET_RADIO && ISA && !64BIT + ---help--- + Aironet makes Arlan, a class of wireless LAN adapters. These use the + www.Telxon.com chip, which is also used on several similar cards. + This driver is tested on the 655 and IC2200 series cards. Look at + <http://www.ylenurme.ee/~elmer/655/> for the latest information. + + The driver is built as two modules, arlan and arlan-proc. The latter + is the /proc interface and is not needed most of time. + + On some computers the card ends up in non-valid state after some + time. Use a ping-reset script to clear it. + +config WAVELAN + tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" + depends on NET_RADIO && ISA + ---help--- + The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is + a Radio LAN (wireless Ethernet-like Local Area Network) using the + radio frequencies 900 MHz and 2.4 GHz. + + This driver support the ISA version of the WaveLAN card. A separate + driver for the PCMCIA (PC-card) hardware is available in David + Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> + for location). + + If you want to use an ISA WaveLAN card under Linux, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Some more specific + information is contained in + <file:Documentation/networking/wavelan.txt> and in the source code + <file:drivers/net/wavelan.p.h>. + + You will also need the wireless tools package available from + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + Please read the man pages contained therein. + + To compile this driver as a module, choose M here: the module will be + called wavelan. + +config PCMCIA_WAVELAN + tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" + depends on NET_RADIO && PCMCIA + help + Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA + (PC-card) wireless Ethernet networking card to your computer. This + driver is for the non-IEEE-802.11 Wavelan cards. + + To compile this driver as a module, choose M here: the module will be + called wavelan_cs. If unsure, say N. + +config PCMCIA_NETWAVE + tristate "Xircom Netwave AirSurfer Pcmcia wireless support" + depends on NET_RADIO && PCMCIA + help + Say Y here if you intend to attach this type of PCMCIA (PC-card) + wireless Ethernet networking card to your computer. + + To compile this driver as a module, choose M here: the module will be + called netwave_cs. If unsure, say N. + +comment "Wireless 802.11 Frequency Hopping cards support" + depends on NET_RADIO && PCMCIA + +config PCMCIA_RAYCS + tristate "Aviator/Raytheon 2.4MHz wireless support" + depends on NET_RADIO && PCMCIA + ---help--- + Say Y here if you intend to attach an Aviator/Raytheon PCMCIA + (PC-card) wireless Ethernet networking card to your computer. + Please read the file <file:Documentation/networking/ray_cs.txt> for + details. + + To compile this driver as a module, choose M here: the module will be + called ray_cs. If unsure, say N. + +comment "Wireless 802.11b ISA/PCI cards support" + depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) + +config AIRO + tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" + depends on NET_RADIO && ISA && (PCI || BROKEN) + ---help--- + This is the standard Linux driver to support Cisco/Aironet ISA and + PCI 802.11 wireless cards. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + + The driver can be compiled as a module and will be named "airo". + +config HERMES + tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" + depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) + ---help--- + A driver for 802.11b wireless cards based based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. + + This option includes the guts of the driver, but in order to + actually use a card you will also need to enable support for PCMCIA + Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works : + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> + +config APPLE_AIRPORT + tristate "Apple Airport support (built-in)" + depends on PPC_PMAC && HERMES + help + Say Y here to support the Airport 802.11b wireless Ethernet hardware + built into the Macintosh iBook and other recent PowerPC-based + Macintosh machines. This is essentially a Lucent Orinoco card with + a non-standard interface + +config PLX_HERMES + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)" + depends on PCI && HERMES && EXPERIMENTAL + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + + Support for these adaptors is so far still incomplete and buggy. + You have been warned. + +config TMD_HERMES + tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)" + depends on PCI && HERMES && EXPERIMENTAL + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in TMD7160 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. + + Support for these adaptors is so far still incomplete and buggy. + You have been warned. + +config PCI_HERMES + tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)" + depends on PCI && HERMES && EXPERIMENTAL + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config ATMEL + tristate "Atmel at76c50x chipset 802.11b support" + depends on NET_RADIO && EXPERIMENTAL + select FW_LOADER + select CRC32 + ---help--- + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. + + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + <http://www.thekelleys.org.uk/atmel> + +config PCI_ATMEL + tristate "Atmel at76c506 PCI cards" + depends on ATMEL && PCI + ---help--- + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. + +# If Pcmcia is compiled in, offer Pcmcia cards... +comment "Wireless 802.11b Pcmcia/Cardbus cards support" + depends on NET_RADIO && PCMCIA + +config PCMCIA_HERMES + tristate "Hermes PCMCIA card support" + depends on NET_RADIO && PCMCIA && HERMES + ---help--- + A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and + others). It should also be usable on various Prism II based cards + such as the Linksys, D-Link and Farallon Skyline. It should also + work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. + + To use your PC-cards, you will need supporting software from David + Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> + for location). You also want to check out the PCMCIA-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works: + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + +config AIRO_CS + tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" + depends on NET_RADIO && PCMCIA + ---help--- + This is the standard Linux driver to support Cisco/Aironet PCMCIA + 802.11 wireless cards. This driver is the same as the Aironet + driver part of the Linux Pcmcia package. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also + supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom + 802.11b cards. + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + + To use your PC-cards, you will need supporting software from David + Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> + for location). You also want to check out the PCMCIA-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + +config PCMCIA_ATMEL + tristate "Atmel at76c502/at76c504 PCMCIA cards" + depends on NET_RADIO && ATMEL && PCMCIA + select FW_LOADER + select CRC32 + ---help--- + Enable support for PCMCIA cards containing the + Atmel at76c502 and at76c504 chips. + +config PCMCIA_WL3501 + tristate "Planet WL3501 PCMCIA cards" + depends on NET_RADIO && EXPERIMENTAL && PCMCIA + ---help--- + A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. + It has basic support for Linux wireless extensions and initial + micro support for ethtool. + +comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support" + depends on NET_RADIO && PCI +config PRISM54 + tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' + depends on PCI && NET_RADIO && EXPERIMENTAL + select FW_LOADER + ---help--- + Enable PCI and Cardbus support for the following chipset based cards: + + ISL3880 - Prism GT 802.11 b/g + ISL3877 - Prism Indigo 802.11 a + ISL3890 - Prism Duette 802.11 a/b/g + + For a complete list of supported cards visit <http://prism54.org>. + Here is the latest confirmed list of supported cards: + + 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + Allnet ALL0271 PCI Card + Compex WL54G Cardbus Card + Corega CG-WLCB54GT Cardbus Card + D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 + I-O Data WN-G54/CB Cardbus Card + Kobishi XG-300 aka Z-Com Cardbus Card + Netgear WG511 Cardbus Card + Ovislink WL-5400PCI PCI Card + Peabird WLG-PCI PCI Card + Sitecom WL-100i Cardbus Card + Sitecom WL-110i PCI Card + SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card + SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card + SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card + Z-Com XG-900 PCI Card + Zyxel G-100 Cardbus Card + + If you enable this you will need a firmware file as well. + You will need to copy this to /usr/lib/hotplug/firmware/isl3890. + You can get this non-GPL'd firmware file from the Prism54 project page: + <http://prism54.org> + You will also need the /etc/hotplug/firmware.agent script from + a current hotplug package. + + Note: You need a motherboard with DMA support to use any of these cards + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called prism54.ko. + +# yes, this works even when no drivers are selected +config NET_WIRELESS + bool + depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) + default y + +endmenu + diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile new file mode 100644 index 00000000000..2b87841322c --- /dev/null +++ b/drivers/net/wireless/Makefile @@ -0,0 +1,33 @@ +# +# Makefile for the Linux Wireless network device drivers. +# + +obj-$(CONFIG_STRIP) += strip.o +obj-$(CONFIG_ARLAN) += arlan.o + +arlan-objs := arlan-main.o arlan-proc.o + +# Obsolete cards +obj-$(CONFIG_WAVELAN) += wavelan.o +obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o +obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o + +obj-$(CONFIG_HERMES) += orinoco.o hermes.o +obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o +obj-$(CONFIG_APPLE_AIRPORT) += airport.o +obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o +obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o +obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o + +obj-$(CONFIG_AIRO) += airo.o +obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o + +obj-$(CONFIG_ATMEL) += atmel.o +obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o +obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o + +obj-$(CONFIG_PRISM54) += prism54/ + +# 16-bit wireless PCMCIA client drivers +obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o +obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o diff --git a/drivers/net/wireless/README b/drivers/net/wireless/README new file mode 100644 index 00000000000..0c274bf6d45 --- /dev/null +++ b/drivers/net/wireless/README @@ -0,0 +1,25 @@ + README + ------ + + This directory is mostly for Wireless LAN drivers, in their +various incarnations (ISA, PCI, Pcmcia...). + This separate directory is needed because a lot of driver work +on different bus (typically PCI + Pcmcia) and share 95% of the +code. This allow the code and the config options to be in one single +place instead of scattered all over the driver tree, which is never +100% satisfactory. + + Note : if you want more info on the topic of Wireless LANs, +you are kindly invited to have a look at the Wireless Howto : + http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ + Some Wireless LAN drivers, like orinoco_cs, require the use of +Wireless Tools to be configured : + http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html + + Special notes for distribution maintainers : + 1) wvlan_cs will be discontinued soon in favor of orinoco_cs + 2) Please add Wireless Tools support in your scripts + + Have fun... + + Jean diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c new file mode 100644 index 00000000000..2899144f215 --- /dev/null +++ b/drivers/net/wireless/airo.c @@ -0,0 +1,7667 @@ +/*====================================================================== + + Aironet driver for 4500 and 4800 series cards + + This code is released under both the GPL version 2 and BSD licenses. + Either license may be used. The respective licenses are found at + the end of this file. + + This code was developed by Benjamin Reed <breed@users.sourceforge.net> + including portions of which come from the Aironet PC4500 + Developer's Reference Manual and used with permission. Copyright + (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use + code in the Developer's manual was granted for this driver by + Aironet. Major code contributions were received from Javier Achirica + <achirica@users.sourceforge.net> and Jean Tourrilhes <jt@hpl.hp.com>. + Code was also integrated from the Cisco Aironet driver for Linux. + Support for MPI350 cards was added by Fabrice Bellet + <fabrice@bellet.info>. + +======================================================================*/ + +#include <linux/config.h> +#include <linux/init.h> + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/smp_lock.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/bitops.h> +#include <asm/io.h> +#include <asm/system.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/uaccess.h> + +#ifdef CONFIG_PCI +static struct pci_device_id card_ids[] = { + { 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, }, + { 0x14b9, 0x4500, PCI_ANY_ID, PCI_ANY_ID }, + { 0x14b9, 0x4800, PCI_ANY_ID, PCI_ANY_ID, }, + { 0x14b9, 0x0340, PCI_ANY_ID, PCI_ANY_ID, }, + { 0x14b9, 0x0350, PCI_ANY_ID, PCI_ANY_ID, }, + { 0x14b9, 0x5000, PCI_ANY_ID, PCI_ANY_ID, }, + { 0x14b9, 0xa504, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, card_ids); + +static int airo_pci_probe(struct pci_dev *, const struct pci_device_id *); +static void airo_pci_remove(struct pci_dev *); +static int airo_pci_suspend(struct pci_dev *pdev, u32 state); +static int airo_pci_resume(struct pci_dev *pdev); + +static struct pci_driver airo_driver = { + .name = "airo", + .id_table = card_ids, + .probe = airo_pci_probe, + .remove = __devexit_p(airo_pci_remove), + .suspend = airo_pci_suspend, + .resume = airo_pci_resume, +}; +#endif /* CONFIG_PCI */ + +/* Include Wireless Extension definition and check version - Jean II */ +#include <linux/wireless.h> +#define WIRELESS_SPY // enable iwspy support +#include <net/iw_handler.h> // New driver API + +#define CISCO_EXT // enable Cisco extensions +#ifdef CISCO_EXT +#include <linux/delay.h> +#endif + +/* Support Cisco MIC feature */ +#define MICSUPPORT + +#if defined(MICSUPPORT) && !defined(CONFIG_CRYPTO) +#warning MIC support requires Crypto API +#undef MICSUPPORT +#endif + +/* Hack to do some power saving */ +#define POWER_ON_DOWN + +/* As you can see this list is HUGH! + I really don't know what a lot of these counts are about, but they + are all here for completeness. If the IGNLABEL macro is put in + infront of the label, that statistic will not be included in the list + of statistics in the /proc filesystem */ + +#define IGNLABEL(comment) NULL +static char *statsLabels[] = { + "RxOverrun", + IGNLABEL("RxPlcpCrcErr"), + IGNLABEL("RxPlcpFormatErr"), + IGNLABEL("RxPlcpLengthErr"), + "RxMacCrcErr", + "RxMacCrcOk", + "RxWepErr", + "RxWepOk", + "RetryLong", + "RetryShort", + "MaxRetries", + "NoAck", + "NoCts", + "RxAck", + "RxCts", + "TxAck", + "TxRts", + "TxCts", + "TxMc", + "TxBc", + "TxUcFrags", + "TxUcPackets", + "TxBeacon", + "RxBeacon", + "TxSinColl", + "TxMulColl", + "DefersNo", + "DefersProt", + "DefersEngy", + "DupFram", + "RxFragDisc", + "TxAged", + "RxAged", + "LostSync-MaxRetry", + "LostSync-MissedBeacons", + "LostSync-ArlExceeded", + "LostSync-Deauth", + "LostSync-Disassoced", + "LostSync-TsfTiming", + "HostTxMc", + "HostTxBc", + "HostTxUc", + "HostTxFail", + "HostRxMc", + "HostRxBc", + "HostRxUc", + "HostRxDiscard", + IGNLABEL("HmacTxMc"), + IGNLABEL("HmacTxBc"), + IGNLABEL("HmacTxUc"), + IGNLABEL("HmacTxFail"), + IGNLABEL("HmacRxMc"), + IGNLABEL("HmacRxBc"), + IGNLABEL("HmacRxUc"), + IGNLABEL("HmacRxDiscard"), + IGNLABEL("HmacRxAccepted"), + "SsidMismatch", + "ApMismatch", + "RatesMismatch", + "AuthReject", + "AuthTimeout", + "AssocReject", + "AssocTimeout", + IGNLABEL("ReasonOutsideTable"), + IGNLABEL("ReasonStatus1"), + IGNLABEL("ReasonStatus2"), + IGNLABEL("ReasonStatus3"), + IGNLABEL("ReasonStatus4"), + IGNLABEL("ReasonStatus5"), + IGNLABEL("ReasonStatus6"), + IGNLABEL("ReasonStatus7"), + IGNLABEL("ReasonStatus8"), + IGNLABEL("ReasonStatus9"), + IGNLABEL("ReasonStatus10"), + IGNLABEL("ReasonStatus11"), + IGNLABEL("ReasonStatus12"), + IGNLABEL("ReasonStatus13"), + IGNLABEL("ReasonStatus14"), + IGNLABEL("ReasonStatus15"), + IGNLABEL("ReasonStatus16"), + IGNLABEL("ReasonStatus17"), + IGNLABEL("ReasonStatus18"), + IGNLABEL("ReasonStatus19"), + "RxMan", + "TxMan", + "RxRefresh", + "TxRefresh", + "RxPoll", + "TxPoll", + "HostRetries", + "LostSync-HostReq", + "HostTxBytes", + "HostRxBytes", + "ElapsedUsec", + "ElapsedSec", + "LostSyncBetterAP", + "PrivacyMismatch", + "Jammed", + "DiscRxNotWepped", + "PhyEleMismatch", + (char*)-1 }; +#ifndef RUN_AT +#define RUN_AT(x) (jiffies+(x)) +#endif + + +/* These variables are for insmod, since it seems that the rates + can only be set in setup_card. Rates should be a comma separated + (no spaces) list of rates (up to 8). */ + +static int rates[8]; +static int basic_rate; +static char *ssids[3]; + +static int io[4]; +static int irq[4]; + +static +int maxencrypt /* = 0 */; /* The highest rate that the card can encrypt at. + 0 means no limit. For old cards this was 4 */ + +static int auto_wep /* = 0 */; /* If set, it tries to figure out the wep mode */ +static int aux_bap /* = 0 */; /* Checks to see if the aux ports are needed to read + the bap, needed on some older cards and buses. */ +static int adhoc; + +static int probe = 1; + +static int proc_uid /* = 0 */; + +static int proc_gid /* = 0 */; + +static int airo_perm = 0555; + +static int proc_perm = 0644; + +MODULE_AUTHOR("Benjamin Reed"); +MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ + cards. Direct support for ISA/PCI/MPI cards and support \ + for PCMCIA when used with airo_cs."); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350"); +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param(basic_rate, int, 0); +module_param_array(rates, int, NULL, 0); +module_param_array(ssids, charp, NULL, 0); +module_param(auto_wep, int, 0); +MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \ +the authentication options until an association is made. The value of \ +auto_wep is number of the wep keys to check. A value of 2 will try using \ +the key at index 0 and index 1."); +module_param(aux_bap, int, 0); +MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \ +than seems to work better for older cards with some older buses. Before \ +switching it checks that the switch is needed."); +module_param(maxencrypt, int, 0); +MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \ +encryption. Units are in 512kbs. Zero (default) means there is no limit. \ +Older cards used to be limited to 2mbs (4)."); +module_param(adhoc, int, 0); +MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode."); +module_param(probe, int, 0); +MODULE_PARM_DESC(probe, "If zero, the driver won't start the card."); + +module_param(proc_uid, int, 0); +MODULE_PARM_DESC(proc_uid, "The uid that the /proc files will belong to."); +module_param(proc_gid, int, 0); +MODULE_PARM_DESC(proc_gid, "The gid that the /proc files will belong to."); +module_param(airo_perm, int, 0); +MODULE_PARM_DESC(airo_perm, "The permission bits of /proc/[driver/]aironet."); +module_param(proc_perm, int, 0); +MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc"); + +/* This is a kind of sloppy hack to get this information to OUT4500 and + IN4500. I would be extremely interested in the situation where this + doesn't work though!!! */ +static int do8bitIO = 0; + +/* Return codes */ +#define SUCCESS 0 +#define ERROR -1 +#define NO_PACKET -2 + +/* Commands */ +#define NOP2 0x0000 +#define MAC_ENABLE 0x0001 +#define MAC_DISABLE 0x0002 +#define CMD_LOSE_SYNC 0x0003 /* Not sure what this does... */ +#define CMD_SOFTRESET 0x0004 +#define HOSTSLEEP 0x0005 +#define CMD_MAGIC_PKT 0x0006 +#define CMD_SETWAKEMASK 0x0007 +#define CMD_READCFG 0x0008 +#define CMD_SETMODE 0x0009 +#define CMD_ALLOCATETX 0x000a +#define CMD_TRANSMIT 0x000b +#define CMD_DEALLOCATETX 0x000c +#define NOP 0x0010 +#define CMD_WORKAROUND 0x0011 +#define CMD_ALLOCATEAUX 0x0020 +#define CMD_ACCESS 0x0021 +#define CMD_PCIBAP 0x0022 +#define CMD_PCIAUX 0x0023 +#define CMD_ALLOCBUF 0x0028 +#define CMD_GETTLV 0x0029 +#define CMD_PUTTLV 0x002a +#define CMD_DELTLV 0x002b +#define CMD_FINDNEXTTLV 0x002c +#define CMD_PSPNODES 0x0030 +#define CMD_SETCW 0x0031 +#define CMD_SETPCF 0x0032 +#define CMD_SETPHYREG 0x003e +#define CMD_TXTEST 0x003f +#define MAC_ENABLETX 0x0101 +#define CMD_LISTBSS 0x0103 +#define CMD_SAVECFG 0x0108 +#define CMD_ENABLEAUX 0x0111 +#define CMD_WRITERID 0x0121 +#define CMD_USEPSPNODES 0x0130 +#define MAC_ENABLERX 0x0201 + +/* Command errors */ +#define ERROR_QUALIF 0x00 +#define ERROR_ILLCMD 0x01 +#define ERROR_ILLFMT 0x02 +#define ERROR_INVFID 0x03 +#define ERROR_INVRID 0x04 +#define ERROR_LARGE 0x05 +#define ERROR_NDISABL 0x06 +#define ERROR_ALLOCBSY 0x07 +#define ERROR_NORD 0x0B +#define ERROR_NOWR 0x0C +#define ERROR_INVFIDTX 0x0D +#define ERROR_TESTACT 0x0E +#define ERROR_TAGNFND 0x12 +#define ERROR_DECODE 0x20 +#define ERROR_DESCUNAV 0x21 +#define ERROR_BADLEN 0x22 +#define ERROR_MODE 0x80 +#define ERROR_HOP 0x81 +#define ERROR_BINTER 0x82 +#define ERROR_RXMODE 0x83 +#define ERROR_MACADDR 0x84 +#define ERROR_RATES 0x85 +#define ERROR_ORDER 0x86 +#define ERROR_SCAN 0x87 +#define ERROR_AUTH 0x88 +#define ERROR_PSMODE 0x89 +#define ERROR_RTYPE 0x8A +#define ERROR_DIVER 0x8B +#define ERROR_SSID 0x8C +#define ERROR_APLIST 0x8D +#define ERROR_AUTOWAKE 0x8E +#define ERROR_LEAP 0x8F + +/* Registers */ +#define COMMAND 0x00 +#define PARAM0 0x02 +#define PARAM1 0x04 +#define PARAM2 0x06 +#define STATUS 0x08 +#define RESP0 0x0a +#define RESP1 0x0c +#define RESP2 0x0e +#define LINKSTAT 0x10 +#define SELECT0 0x18 +#define OFFSET0 0x1c +#define RXFID 0x20 +#define TXALLOCFID 0x22 +#define TXCOMPLFID 0x24 +#define DATA0 0x36 +#define EVSTAT 0x30 +#define EVINTEN 0x32 +#define EVACK 0x34 +#define SWS0 0x28 +#define SWS1 0x2a +#define SWS2 0x2c +#define SWS3 0x2e +#define AUXPAGE 0x3A +#define AUXOFF 0x3C +#define AUXDATA 0x3E + +#define FID_TX 1 +#define FID_RX 2 +/* Offset into aux memory for descriptors */ +#define AUX_OFFSET 0x800 +/* Size of allocated packets */ +#define PKTSIZE 1840 +#define RIDSIZE 2048 +/* Size of the transmit queue */ +#define MAXTXQ 64 + +/* BAP selectors */ +#define BAP0 0 // Used for receiving packets +#define BAP1 2 // Used for xmiting packets and working with RIDS + +/* Flags */ +#define COMMAND_BUSY 0x8000 + +#define BAP_BUSY 0x8000 +#define BAP_ERR 0x4000 +#define BAP_DONE 0x2000 + +#define PROMISC 0xffff +#define NOPROMISC 0x0000 + +#define EV_CMD 0x10 +#define EV_CLEARCOMMANDBUSY 0x4000 +#define EV_RX 0x01 +#define EV_TX 0x02 +#define EV_TXEXC 0x04 +#define EV_ALLOC 0x08 +#define EV_LINK 0x80 +#define EV_AWAKE 0x100 +#define EV_TXCPY 0x400 +#define EV_UNKNOWN 0x800 +#define EV_MIC 0x1000 /* Message Integrity Check Interrupt */ +#define EV_AWAKEN 0x2000 +#define STATUS_INTS (EV_AWAKE|EV_LINK|EV_TXEXC|EV_TX|EV_TXCPY|EV_RX|EV_MIC) + +#ifdef CHECK_UNKNOWN_INTS +#define IGNORE_INTS ( EV_CMD | EV_UNKNOWN) +#else +#define IGNORE_INTS (~STATUS_INTS) +#endif + +/* RID TYPES */ +#define RID_RW 0x20 + +/* The RIDs */ +#define RID_CAPABILITIES 0xFF00 +#define RID_APINFO 0xFF01 +#define RID_RADIOINFO 0xFF02 +#define RID_UNKNOWN3 0xFF03 +#define RID_RSSI 0xFF04 +#define RID_CONFIG 0xFF10 +#define RID_SSID 0xFF11 +#define RID_APLIST 0xFF12 +#define RID_DRVNAME 0xFF13 +#define RID_ETHERENCAP 0xFF14 +#define RID_WEP_TEMP 0xFF15 +#define RID_WEP_PERM 0xFF16 +#define RID_MODULATION 0xFF17 +#define RID_OPTIONS 0xFF18 +#define RID_ACTUALCONFIG 0xFF20 /*readonly*/ +#define RID_FACTORYCONFIG 0xFF21 +#define RID_UNKNOWN22 0xFF22 +#define RID_LEAPUSERNAME 0xFF23 +#define RID_LEAPPASSWORD 0xFF24 +#define RID_STATUS 0xFF50 +#define RID_BEACON_HST 0xFF51 +#define RID_BUSY_HST 0xFF52 +#define RID_RETRIES_HST 0xFF53 +#define RID_UNKNOWN54 0xFF54 +#define RID_UNKNOWN55 0xFF55 +#define RID_UNKNOWN56 0xFF56 +#define RID_MIC 0xFF57 +#define RID_STATS16 0xFF60 +#define RID_STATS16DELTA 0xFF61 +#define RID_STATS16DELTACLEAR 0xFF62 +#define RID_STATS 0xFF68 +#define RID_STATSDELTA 0xFF69 +#define RID_STATSDELTACLEAR 0xFF6A +#define RID_ECHOTEST_RID 0xFF70 +#define RID_ECHOTEST_RESULTS 0xFF71 +#define RID_BSSLISTFIRST 0xFF72 +#define RID_BSSLISTNEXT 0xFF73 + +typedef struct { + u16 cmd; + u16 parm0; + u16 parm1; + u16 parm2; +} Cmd; + +typedef struct { + u16 status; + u16 rsp0; + u16 rsp1; + u16 rsp2; +} Resp; + +/* + * Rids and endian-ness: The Rids will always be in cpu endian, since + * this all the patches from the big-endian guys end up doing that. + * so all rid access should use the read/writeXXXRid routines. + */ + +/* This is redundant for x86 archs, but it seems necessary for ARM */ +#pragma pack(1) + +/* This structure came from an email sent to me from an engineer at + aironet for inclusion into this driver */ +typedef struct { + u16 len; + u16 kindex; + u8 mac[ETH_ALEN]; + u16 klen; + u8 key[16]; +} WepKeyRid; + +/* These structures are from the Aironet's PC4500 Developers Manual */ +typedef struct { + u16 len; + u8 ssid[32]; +} Ssid; + +typedef struct { + u16 len; + Ssid ssids[3]; +} SsidRid; + +typedef struct { + u16 len; + u16 modulation; +#define MOD_DEFAULT 0 +#define MOD_CCK 1 +#define MOD_MOK 2 +} ModulationRid; + +typedef struct { + u16 len; /* sizeof(ConfigRid) */ + u16 opmode; /* operating mode */ +#define MODE_STA_IBSS 0 +#define MODE_STA_ESS 1 +#define MODE_AP 2 +#define MODE_AP_RPTR 3 +#define MODE_ETHERNET_HOST (0<<8) /* rx payloads converted */ +#define MODE_LLC_HOST (1<<8) /* rx payloads left as is */ +#define MODE_AIRONET_EXTEND (1<<9) /* enable Aironet extenstions */ +#define MODE_AP_INTERFACE (1<<10) /* enable ap interface extensions */ +#define MODE_ANTENNA_ALIGN (1<<11) /* enable antenna alignment */ +#define MODE_ETHER_LLC (1<<12) /* enable ethernet LLC */ +#define MODE_LEAF_NODE (1<<13) /* enable leaf node bridge */ +#define MODE_CF_POLLABLE (1<<14) /* enable CF pollable */ +#define MODE_MIC (1<<15) /* enable MIC */ + u16 rmode; /* receive mode */ +#define RXMODE_BC_MC_ADDR 0 +#define RXMODE_BC_ADDR 1 /* ignore multicasts */ +#define RXMODE_ADDR 2 /* ignore multicast and broadcast */ +#define RXMODE_RFMON 3 /* wireless monitor mode */ +#define RXMODE_RFMON_ANYBSS 4 +#define RXMODE_LANMON 5 /* lan style monitor -- data packets only */ +#define RXMODE_DISABLE_802_3_HEADER (1<<8) /* disables 802.3 header on rx */ +#define RXMODE_NORMALIZED_RSSI (1<<9) /* return normalized RSSI */ + u16 fragThresh; + u16 rtsThres; + u8 macAddr[ETH_ALEN]; + u8 rates[8]; + u16 shortRetryLimit; + u16 longRetryLimit; + u16 txLifetime; /* in kusec */ + u16 rxLifetime; /* in kusec */ + u16 stationary; + u16 ordering; + u16 u16deviceType; /* for overriding device type */ + u16 cfpRate; + u16 cfpDuration; + u16 _reserved1[3]; + /*---------- Scanning/Associating ----------*/ + u16 scanMode; +#define SCANMODE_ACTIVE 0 +#define SCANMODE_PASSIVE 1 +#define SCANMODE_AIROSCAN 2 + u16 probeDelay; /* in kusec */ + u16 probeEnergyTimeout; /* in kusec */ + u16 probeResponseTimeout; + u16 beaconListenTimeout; + u16 joinNetTimeout; + u16 authTimeout; + u16 authType; +#define AUTH_OPEN 0x1 +#define AUTH_ENCRYPT 0x101 +#define AUTH_SHAREDKEY 0x102 +#define AUTH_ALLOW_UNENCRYPTED 0x200 + u16 associationTimeout; + u16 specifiedApTimeout; + u16 offlineScanInterval; + u16 offlineScanDuration; + u16 linkLossDelay; + u16 maxBeaconLostTime; + u16 refreshInterval; +#define DISABLE_REFRESH 0xFFFF + u16 _reserved1a[1]; + /*---------- Power save operation ----------*/ + u16 powerSaveMode; +#define POWERSAVE_CAM 0 +#define POWERSAVE_PSP 1 +#define POWERSAVE_PSPCAM 2 + u16 sleepForDtims; + u16 listenInterval; + u16 fastListenInterval; + u16 listenDecay; + u16 fastListenDelay; + u16 _reserved2[2]; + /*---------- Ap/Ibss config items ----------*/ + u16 beaconPeriod; + u16 atimDuration; + u16 hopPeriod; + u16 channelSet; + u16 channel; + u16 dtimPeriod; + u16 bridgeDistance; + u16 radioID; + /*---------- Radio configuration ----------*/ + u16 radioType; +#define RADIOTYPE_DEFAULT 0 +#define RADIOTYPE_802_11 1 +#define RADIOTYPE_LEGACY 2 + u8 rxDiversity; + u8 txDiversity; + u16 txPower; +#define TXPOWER_DEFAULT 0 + u16 rssiThreshold; +#define RSSI_DEFAULT 0 + u16 modulation; +#define PREAMBLE_AUTO 0 +#define PREAMBLE_LONG 1 +#define PREAMBLE_SHORT 2 + u16 preamble; + u16 homeProduct; + u16 radioSpecific; + /*---------- Aironet Extensions ----------*/ + u8 nodeName[16]; + u16 arlThreshold; + u16 arlDecay; + u16 arlDelay; + u16 _reserved4[1]; + /*---------- Aironet Extensions ----------*/ + u8 magicAction; +#define MAGIC_ACTION_STSCHG 1 +#define MAGIC_ACTION_RESUME 2 +#define MAGIC_IGNORE_MCAST (1<<8) +#define MAGIC_IGNORE_BCAST (1<<9) +#define MAGIC_SWITCH_TO_PSP (0<<10) +#define MAGIC_STAY_IN_CAM (1<<10) + u8 magicControl; + u16 autoWake; +} ConfigRid; + +typedef struct { + u16 len; + u8 mac[ETH_ALEN]; + u16 mode; + u16 errorCode; + u16 sigQuality; + u16 SSIDlen; + char SSID[32]; + char apName[16]; + u8 bssid[4][ETH_ALEN]; + u16 beaconPeriod; + u16 dimPeriod; + u16 atimDuration; + u16 hopPeriod; + u16 channelSet; + u16 channel; + u16 hopsToBackbone; + u16 apTotalLoad; + u16 generatedLoad; + u16 accumulatedArl; + u16 signalQuality; + u16 currentXmitRate; + u16 apDevExtensions; + u16 normalizedSignalStrength; + u16 shortPreamble; + u8 apIP[4]; + u8 noisePercent; /* Noise percent in last second */ + u8 noisedBm; /* Noise dBm in last second */ + u8 noiseAvePercent; /* Noise percent in last minute */ + u8 noiseAvedBm; /* Noise dBm in last minute */ + u8 noiseMaxPercent; /* Highest noise percent in last minute */ + u8 noiseMaxdBm; /* Highest noise dbm in last minute */ + u16 load; + u8 carrier[4]; + u16 assocStatus; +#define STAT_NOPACKETS 0 +#define STAT_NOCARRIERSET 10 +#define STAT_GOTCARRIERSET 11 +#define STAT_WRONGSSID 20 +#define STAT_BADCHANNEL 25 +#define STAT_BADBITRATES 30 +#define STAT_BADPRIVACY 35 +#define STAT_APFOUND 40 +#define STAT_APREJECTED 50 +#define STAT_AUTHENTICATING 60 +#define STAT_DEAUTHENTICATED 61 +#define STAT_AUTHTIMEOUT 62 +#define STAT_ASSOCIATING 70 +#define STAT_DEASSOCIATED 71 +#define STAT_ASSOCTIMEOUT 72 +#define STAT_NOTAIROAP 73 +#define STAT_ASSOCIATED 80 +#define STAT_LEAPING 90 +#define STAT_LEAPFAILED 91 +#define STAT_LEAPTIMEDOUT 92 +#define STAT_LEAPCOMPLETE 93 +} StatusRid; + +typedef struct { + u16 len; + u16 spacer; + u32 vals[100]; +} StatsRid; + + +typedef struct { + u16 len; + u8 ap[4][ETH_ALEN]; +} APListRid; + +typedef struct { + u16 len; + char oui[3]; + char zero; + u16 prodNum; + char manName[32]; + char prodName[16]; + char prodVer[8]; + char factoryAddr[ETH_ALEN]; + char aironetAddr[ETH_ALEN]; + u16 radioType; + u16 country; + char callid[ETH_ALEN]; + char supportedRates[8]; + char rxDiversity; + char txDiversity; + u16 txPowerLevels[8]; + u16 hardVer; + u16 hardCap; + u16 tempRange; + u16 softVer; + u16 softSubVer; + u16 interfaceVer; + u16 softCap; + u16 bootBlockVer; + u16 requiredHard; + u16 extSoftCap; +} CapabilityRid; + +typedef struct { + u16 len; + u16 index; /* First is 0 and 0xffff means end of list */ +#define RADIO_FH 1 /* Frequency hopping radio type */ +#define RADIO_DS 2 /* Direct sequence radio type */ +#define RADIO_TMA 4 /* Proprietary radio used in old cards (2500) */ + u16 radioType; + u8 bssid[ETH_ALEN]; /* Mac address of the BSS */ + u8 zero; + u8 ssidLen; + u8 ssid[32]; + u16 rssi; +#define CAP_ESS (1<<0) +#define CAP_IBSS (1<<1) +#define CAP_PRIVACY (1<<4) +#define CAP_SHORTHDR (1<<5) + u16 cap; + u16 beaconInterval; + u8 rates[8]; /* Same as rates for config rid */ + struct { /* For frequency hopping only */ + u16 dwell; + u8 hopSet; + u8 hopPattern; + u8 hopIndex; + u8 fill; + } fh; + u16 dsChannel; + u16 atimWindow; +} BSSListRid; + +typedef struct { + u8 rssipct; + u8 rssidBm; +} tdsRssiEntry; + +typedef struct { + u16 len; + tdsRssiEntry x[256]; +} tdsRssiRid; + +typedef struct { + u16 len; + u16 state; + u16 multicastValid; + u8 multicast[16]; + u16 unicastValid; + u8 unicast[16]; +} MICRid; + +typedef struct { + u16 typelen; + + union { + u8 snap[8]; + struct { + u8 dsap; + u8 ssap; + u8 control; + u8 orgcode[3]; + u8 fieldtype[2]; + } llc; + } u; + u32 mic; + u32 seq; +} MICBuffer; + +typedef struct { + u8 da[ETH_ALEN]; + u8 sa[ETH_ALEN]; +} etherHead; + +#pragma pack() + +#define TXCTL_TXOK (1<<1) /* report if tx is ok */ +#define TXCTL_TXEX (1<<2) /* report if tx fails */ +#define TXCTL_802_3 (0<<3) /* 802.3 packet */ +#define TXCTL_802_11 (1<<3) /* 802.11 mac packet */ +#define TXCTL_ETHERNET (0<<4) /* payload has ethertype */ +#define TXCTL_LLC (1<<4) /* payload is llc */ +#define TXCTL_RELEASE (0<<5) /* release after completion */ +#define TXCTL_NORELEASE (1<<5) /* on completion returns to host */ + +#define BUSY_FID 0x10000 + +#ifdef CISCO_EXT +#define AIROMAGIC 0xa55a +/* Warning : SIOCDEVPRIVATE may disapear during 2.5.X - Jean II */ +#ifdef SIOCIWFIRSTPRIV +#ifdef SIOCDEVPRIVATE +#define AIROOLDIOCTL SIOCDEVPRIVATE +#define AIROOLDIDIFC AIROOLDIOCTL + 1 +#endif /* SIOCDEVPRIVATE */ +#else /* SIOCIWFIRSTPRIV */ +#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE +#endif /* SIOCIWFIRSTPRIV */ +/* This may be wrong. When using the new SIOCIWFIRSTPRIV range, we probably + * should use only "GET" ioctls (last bit set to 1). "SET" ioctls are root + * only and don't return the modified struct ifreq to the application which + * is usually a problem. - Jean II */ +#define AIROIOCTL SIOCIWFIRSTPRIV +#define AIROIDIFC AIROIOCTL + 1 + +/* Ioctl constants to be used in airo_ioctl.command */ + +#define AIROGCAP 0 // Capability rid +#define AIROGCFG 1 // USED A LOT +#define AIROGSLIST 2 // System ID list +#define AIROGVLIST 3 // List of specified AP's +#define AIROGDRVNAM 4 // NOTUSED +#define AIROGEHTENC 5 // NOTUSED +#define AIROGWEPKTMP 6 +#define AIROGWEPKNV 7 +#define AIROGSTAT 8 +#define AIROGSTATSC32 9 +#define AIROGSTATSD32 10 +#define AIROGMICRID 11 +#define AIROGMICSTATS 12 +#define AIROGFLAGS 13 +#define AIROGID 14 +#define AIRORRID 15 +#define AIRORSWVERSION 17 + +/* Leave gap of 40 commands after AIROGSTATSD32 for future */ + +#define AIROPCAP AIROGSTATSD32 + 40 +#define AIROPVLIST AIROPCAP + 1 +#define AIROPSLIST AIROPVLIST + 1 +#define AIROPCFG AIROPSLIST + 1 +#define AIROPSIDS AIROPCFG + 1 +#define AIROPAPLIST AIROPSIDS + 1 +#define AIROPMACON AIROPAPLIST + 1 /* Enable mac */ +#define AIROPMACOFF AIROPMACON + 1 /* Disable mac */ +#define AIROPSTCLR AIROPMACOFF + 1 +#define AIROPWEPKEY AIROPSTCLR + 1 +#define AIROPWEPKEYNV AIROPWEPKEY + 1 +#define AIROPLEAPPWD AIROPWEPKEYNV + 1 +#define AIROPLEAPUSR AIROPLEAPPWD + 1 + +/* Flash codes */ + +#define AIROFLSHRST AIROPWEPKEYNV + 40 +#define AIROFLSHGCHR AIROFLSHRST + 1 +#define AIROFLSHSTFL AIROFLSHGCHR + 1 +#define AIROFLSHPCHR AIROFLSHSTFL + 1 +#define AIROFLPUTBUF AIROFLSHPCHR + 1 +#define AIRORESTART AIROFLPUTBUF + 1 + +#define FLASHSIZE 32768 +#define AUXMEMSIZE (256 * 1024) + +typedef struct aironet_ioctl { + unsigned short command; // What to do + unsigned short len; // Len of data + unsigned short ridnum; // rid number + unsigned char __user *data; // d-data +} aironet_ioctl; + +static char *swversion = "2.1"; +#endif /* CISCO_EXT */ + +#define NUM_MODULES 2 +#define MIC_MSGLEN_MAX 2400 +#define EMMH32_MSGLEN_MAX MIC_MSGLEN_MAX + +typedef struct { + u32 size; // size + u8 enabled; // MIC enabled or not + u32 rxSuccess; // successful packets received + u32 rxIncorrectMIC; // pkts dropped due to incorrect MIC comparison + u32 rxNotMICed; // pkts dropped due to not being MIC'd + u32 rxMICPlummed; // pkts dropped due to not having a MIC plummed + u32 rxWrongSequence; // pkts dropped due to sequence number violation + u32 reserve[32]; +} mic_statistics; + +typedef struct { + u32 coeff[((EMMH32_MSGLEN_MAX)+3)>>2]; + u64 accum; // accumulated mic, reduced to u32 in final() + int position; // current position (byte offset) in message + union { + u8 d8[4]; + u32 d32; + } part; // saves partial message word across update() calls +} emmh32_context; + +typedef struct { + emmh32_context seed; // Context - the seed + u32 rx; // Received sequence number + u32 tx; // Tx sequence number + u32 window; // Start of window + u8 valid; // Flag to say if context is valid or not + u8 key[16]; +} miccntx; + +typedef struct { + miccntx mCtx; // Multicast context + miccntx uCtx; // Unicast context +} mic_module; + +typedef struct { + unsigned int rid: 16; + unsigned int len: 15; + unsigned int valid: 1; + dma_addr_t host_addr; +} Rid; + +typedef struct { + unsigned int offset: 15; + unsigned int eoc: 1; + unsigned int len: 15; + unsigned int valid: 1; + dma_addr_t host_addr; +} TxFid; + +typedef struct { + unsigned int ctl: 15; + unsigned int rdy: 1; + unsigned int len: 15; + unsigned int valid: 1; + dma_addr_t host_addr; +} RxFid; + +/* + * Host receive descriptor + */ +typedef struct { + unsigned char __iomem *card_ram_off; /* offset into card memory of the + desc */ + RxFid rx_desc; /* card receive descriptor */ + char *virtual_host_addr; /* virtual address of host receive + buffer */ + int pending; +} HostRxDesc; + +/* + * Host transmit descriptor + */ +typedef struct { + unsigned char __iomem *card_ram_off; /* offset into card memory of the + desc */ + TxFid tx_desc; /* card transmit descriptor */ + char *virtual_host_addr; /* virtual address of host receive + buffer */ + int pending; +} HostTxDesc; + +/* + * Host RID descriptor + */ +typedef struct { + unsigned char __iomem *card_ram_off; /* offset into card memory of the + descriptor */ + Rid rid_desc; /* card RID descriptor */ + char *virtual_host_addr; /* virtual address of host receive + buffer */ +} HostRidDesc; + +typedef struct { + u16 sw0; + u16 sw1; + u16 status; + u16 len; +#define HOST_SET (1 << 0) +#define HOST_INT_TX (1 << 1) /* Interrupt on successful TX */ +#define HOST_INT_TXERR (1 << 2) /* Interrupt on unseccessful TX */ +#define HOST_LCC_PAYLOAD (1 << 4) /* LLC payload, 0 = Ethertype */ +#define HOST_DONT_RLSE (1 << 5) /* Don't release buffer when done */ +#define HOST_DONT_RETRY (1 << 6) /* Don't retry trasmit */ +#define HOST_CLR_AID (1 << 7) /* clear AID failure */ +#define HOST_RTS (1 << 9) /* Force RTS use */ +#define HOST_SHORT (1 << 10) /* Do short preamble */ + u16 ctl; + u16 aid; + u16 retries; + u16 fill; +} TxCtlHdr; + +typedef struct { + u16 ctl; + u16 duration; + char addr1[6]; + char addr2[6]; + char addr3[6]; + u16 seq; + char addr4[6]; +} WifiHdr; + + +typedef struct { + TxCtlHdr ctlhdr; + u16 fill1; + u16 fill2; + WifiHdr wifihdr; + u16 gaplen; + u16 status; +} WifiCtlHdr; + +WifiCtlHdr wifictlhdr8023 = { + .ctlhdr = { + .ctl = HOST_DONT_RLSE, + } +}; + +#ifdef WIRELESS_EXT +// Frequency list (map channels to frequencies) +static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; + +// A few details needed for WEP (Wireless Equivalent Privacy) +#define MAX_KEY_SIZE 13 // 128 (?) bits +#define MIN_KEY_SIZE 5 // 40 bits RC4 - WEP +typedef struct wep_key_t { + u16 len; + u8 key[16]; /* 40-bit and 104-bit keys */ +} wep_key_t; + +/* Backward compatibility */ +#ifndef IW_ENCODE_NOKEY +#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ +#define IW_ENCODE_MODE (IW_ENCODE_DISABLED | IW_ENCODE_RESTRICTED | IW_ENCODE_OPEN) +#endif /* IW_ENCODE_NOKEY */ + +/* List of Wireless Handlers (new API) */ +static const struct iw_handler_def airo_handler_def; +#endif /* WIRELESS_EXT */ + +static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)"; + +struct airo_info; + +static int get_dec_u16( char *buffer, int *start, int limit ); +static void OUT4500( struct airo_info *, u16 register, u16 value ); +static unsigned short IN4500( struct airo_info *, u16 register ); +static u16 setup_card(struct airo_info*, u8 *mac, int lock); +static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock ); +static void disable_MAC(struct airo_info *ai, int lock); +static void enable_interrupts(struct airo_info*); +static void disable_interrupts(struct airo_info*); +static u16 issuecommand(struct airo_info*, Cmd *pCmd, Resp *pRsp); +static int bap_setup(struct airo_info*, u16 rid, u16 offset, int whichbap); +static int aux_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen, + int whichbap); +static int fast_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen, + int whichbap); +static int bap_write(struct airo_info*, const u16 *pu16Src, int bytelen, + int whichbap); +static int PC4500_accessrid(struct airo_info*, u16 rid, u16 accmd); +static int PC4500_readrid(struct airo_info*, u16 rid, void *pBuf, int len, int lock); +static int PC4500_writerid(struct airo_info*, u16 rid, const void + *pBuf, int len, int lock); +static int do_writerid( struct airo_info*, u16 rid, const void *rid_data, + int len, int dummy ); +static u16 transmit_allocate(struct airo_info*, int lenPayload, int raw); +static int transmit_802_3_packet(struct airo_info*, int len, char *pPacket); +static int transmit_802_11_packet(struct airo_info*, int len, char *pPacket); + +static int mpi_send_packet (struct net_device *dev); +static void mpi_unmap_card(struct pci_dev *pci); +static void mpi_receive_802_3(struct airo_info *ai); +static void mpi_receive_802_11(struct airo_info *ai); +static int waitbusy (struct airo_info *ai); + +static irqreturn_t airo_interrupt( int irq, void* dev_id, struct pt_regs + *regs); +static int airo_thread(void *data); +static void timer_func( struct net_device *dev ); +static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +#ifdef WIRELESS_EXT +struct iw_statistics *airo_get_wireless_stats (struct net_device *dev); +static void airo_read_wireless_stats (struct airo_info *local); +#endif /* WIRELESS_EXT */ +#ifdef CISCO_EXT +static int readrids(struct net_device *dev, aironet_ioctl *comp); +static int writerids(struct net_device *dev, aironet_ioctl *comp); +int flashcard(struct net_device *dev, aironet_ioctl *comp); +#endif /* CISCO_EXT */ +#ifdef MICSUPPORT +static void micinit(struct airo_info *ai); +static int micsetup(struct airo_info *ai); +static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len); +static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen); + +#include <linux/crypto.h> +#endif + +struct airo_info { + struct net_device_stats stats; + struct net_device *dev; + /* Note, we can have MAX_FIDS outstanding. FIDs are 16-bits, so we + use the high bit to mark whether it is in use. */ +#define MAX_FIDS 6 +#define MPI_MAX_FIDS 1 + int fids[MAX_FIDS]; + ConfigRid config; + char keyindex; // Used with auto wep + char defindex; // Used with auto wep + struct proc_dir_entry *proc_entry; + spinlock_t aux_lock; + unsigned long flags; +#define FLAG_PROMISC 8 /* IFF_PROMISC 0x100 - include/linux/if.h */ +#define FLAG_RADIO_OFF 0 /* User disabling of MAC */ +#define FLAG_RADIO_DOWN 1 /* ifup/ifdown disabling of MAC */ +#define FLAG_RADIO_MASK 0x03 +#define FLAG_ENABLED 2 +#define FLAG_ADHOC 3 /* Needed by MIC */ +#define FLAG_MIC_CAPABLE 4 +#define FLAG_UPDATE_MULTI 5 +#define FLAG_UPDATE_UNI 6 +#define FLAG_802_11 7 +#define FLAG_PENDING_XMIT 9 +#define FLAG_PENDING_XMIT11 10 +#define FLAG_MPI 11 +#define FLAG_REGISTERED 12 +#define FLAG_COMMIT 13 +#define FLAG_RESET 14 +#define FLAG_FLASHING 15 +#define JOB_MASK 0x1ff0000 +#define JOB_DIE 16 +#define JOB_XMIT 17 +#define JOB_XMIT11 18 +#define JOB_STATS 19 +#define JOB_PROMISC 20 +#define JOB_MIC 21 +#define JOB_EVENT 22 +#define JOB_AUTOWEP 23 +#define JOB_WSTATS 24 + int (*bap_read)(struct airo_info*, u16 *pu16Dst, int bytelen, + int whichbap); + unsigned short *flash; + tdsRssiEntry *rssi; + struct task_struct *task; + struct semaphore sem; + pid_t thr_pid; + wait_queue_head_t thr_wait; + struct completion thr_exited; + unsigned long expires; + struct { + struct sk_buff *skb; + int fid; + } xmit, xmit11; + struct net_device *wifidev; +#ifdef WIRELESS_EXT + struct iw_statistics wstats; // wireless stats + unsigned long scan_timestamp; /* Time started to scan */ + struct iw_spy_data spy_data; + struct iw_public_data wireless_data; +#endif /* WIRELESS_EXT */ +#ifdef MICSUPPORT + /* MIC stuff */ + struct crypto_tfm *tfm; + mic_module mod[2]; + mic_statistics micstats; +#endif + HostRxDesc rxfids[MPI_MAX_FIDS]; // rx/tx/config MPI350 descriptors + HostTxDesc txfids[MPI_MAX_FIDS]; + HostRidDesc config_desc; + unsigned long ridbus; // phys addr of config_desc + struct sk_buff_head txq;// tx queue used by mpi350 code + struct pci_dev *pci; + unsigned char __iomem *pcimem; + unsigned char __iomem *pciaux; + unsigned char *shared; + dma_addr_t shared_dma; + int power; + SsidRid *SSID; + APListRid *APList; +#define PCI_SHARED_LEN 2*MPI_MAX_FIDS*PKTSIZE+RIDSIZE + char proc_name[IFNAMSIZ]; +}; + +static inline int bap_read(struct airo_info *ai, u16 *pu16Dst, int bytelen, + int whichbap) { + return ai->bap_read(ai, pu16Dst, bytelen, whichbap); +} + +static int setup_proc_entry( struct net_device *dev, + struct airo_info *apriv ); +static int takedown_proc_entry( struct net_device *dev, + struct airo_info *apriv ); + +#ifdef MICSUPPORT +/*********************************************************************** + * MIC ROUTINES * + *********************************************************************** + */ + +static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq); +static void MoveWindow(miccntx *context, u32 micSeq); +void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *); +void emmh32_init(emmh32_context *context); +void emmh32_update(emmh32_context *context, u8 *pOctets, int len); +void emmh32_final(emmh32_context *context, u8 digest[4]); + +/* micinit - Initialize mic seed */ + +static void micinit(struct airo_info *ai) +{ + MICRid mic_rid; + + clear_bit(JOB_MIC, &ai->flags); + PC4500_readrid(ai, RID_MIC, &mic_rid, sizeof(mic_rid), 0); + up(&ai->sem); + + ai->micstats.enabled = (mic_rid.state & 0x00FF) ? 1 : 0; + + if (ai->micstats.enabled) { + /* Key must be valid and different */ + if (mic_rid.multicastValid && (!ai->mod[0].mCtx.valid || + (memcmp (ai->mod[0].mCtx.key, mic_rid.multicast, + sizeof(ai->mod[0].mCtx.key)) != 0))) { + /* Age current mic Context */ + memcpy(&ai->mod[1].mCtx,&ai->mod[0].mCtx,sizeof(miccntx)); + /* Initialize new context */ + memcpy(&ai->mod[0].mCtx.key,mic_rid.multicast,sizeof(mic_rid.multicast)); + ai->mod[0].mCtx.window = 33; //Window always points to the middle + ai->mod[0].mCtx.rx = 0; //Rx Sequence numbers + ai->mod[0].mCtx.tx = 0; //Tx sequence numbers + ai->mod[0].mCtx.valid = 1; //Key is now valid + + /* Give key to mic seed */ + emmh32_setseed(&ai->mod[0].mCtx.seed,mic_rid.multicast,sizeof(mic_rid.multicast), ai->tfm); + } + + /* Key must be valid and different */ + if (mic_rid.unicastValid && (!ai->mod[0].uCtx.valid || + (memcmp(ai->mod[0].uCtx.key, mic_rid.unicast, + sizeof(ai->mod[0].uCtx.key)) != 0))) { + /* Age current mic Context */ + memcpy(&ai->mod[1].uCtx,&ai->mod[0].uCtx,sizeof(miccntx)); + /* Initialize new context */ + memcpy(&ai->mod[0].uCtx.key,mic_rid.unicast,sizeof(mic_rid.unicast)); + + ai->mod[0].uCtx.window = 33; //Window always points to the middle + ai->mod[0].uCtx.rx = 0; //Rx Sequence numbers + ai->mod[0].uCtx.tx = 0; //Tx sequence numbers + ai->mod[0].uCtx.valid = 1; //Key is now valid + + //Give key to mic seed + emmh32_setseed(&ai->mod[0].uCtx.seed, mic_rid.unicast, sizeof(mic_rid.unicast), ai->tfm); + } + } else { + /* So next time we have a valid key and mic is enabled, we will update + * the sequence number if the key is the same as before. + */ + ai->mod[0].uCtx.valid = 0; + ai->mod[0].mCtx.valid = 0; + } +} + +/* micsetup - Get ready for business */ + +static int micsetup(struct airo_info *ai) { + int i; + + if (ai->tfm == NULL) + ai->tfm = crypto_alloc_tfm("aes", 0); + + if (ai->tfm == NULL) { + printk(KERN_ERR "airo: failed to load transform for AES\n"); + return ERROR; + } + + for (i=0; i < NUM_MODULES; i++) { + memset(&ai->mod[i].mCtx,0,sizeof(miccntx)); + memset(&ai->mod[i].uCtx,0,sizeof(miccntx)); + } + return SUCCESS; +} + +char micsnap[]= {0xAA,0xAA,0x03,0x00,0x40,0x96,0x00,0x02}; + +/*=========================================================================== + * Description: Mic a packet + * + * Inputs: etherHead * pointer to an 802.3 frame + * + * Returns: BOOLEAN if successful, otherwise false. + * PacketTxLen will be updated with the mic'd packets size. + * + * Caveats: It is assumed that the frame buffer will already + * be big enough to hold the largets mic message possible. + * (No memory allocation is done here). + * + * Author: sbraneky (10/15/01) + * Merciless hacks by rwilcher (1/14/02) + */ + +static int encapsulate(struct airo_info *ai ,etherHead *frame, MICBuffer *mic, int payLen) +{ + miccntx *context; + + // Determine correct context + // If not adhoc, always use unicast key + + if (test_bit(FLAG_ADHOC, &ai->flags) && (frame->da[0] & 0x1)) + context = &ai->mod[0].mCtx; + else + context = &ai->mod[0].uCtx; + + if (!context->valid) + return ERROR; + + mic->typelen = htons(payLen + 16); //Length of Mic'd packet + + memcpy(&mic->u.snap, micsnap, sizeof(micsnap)); // Add Snap + + // Add Tx sequence + mic->seq = htonl(context->tx); + context->tx += 2; + + emmh32_init(&context->seed); // Mic the packet + emmh32_update(&context->seed,frame->da,ETH_ALEN * 2); // DA,SA + emmh32_update(&context->seed,(u8*)&mic->typelen,10); // Type/Length and Snap + emmh32_update(&context->seed,(u8*)&mic->seq,sizeof(mic->seq)); //SEQ + emmh32_update(&context->seed,frame->da + ETH_ALEN * 2,payLen); //payload + emmh32_final(&context->seed, (u8*)&mic->mic); + + /* New Type/length ?????????? */ + mic->typelen = 0; //Let NIC know it could be an oversized packet + return SUCCESS; +} + +typedef enum { + NONE, + NOMIC, + NOMICPLUMMED, + SEQUENCE, + INCORRECTMIC, +} mic_error; + +/*=========================================================================== + * Description: Decapsulates a MIC'd packet and returns the 802.3 packet + * (removes the MIC stuff) if packet is a valid packet. + * + * Inputs: etherHead pointer to the 802.3 packet + * + * Returns: BOOLEAN - TRUE if packet should be dropped otherwise FALSE + * + * Author: sbraneky (10/15/01) + * Merciless hacks by rwilcher (1/14/02) + *--------------------------------------------------------------------------- + */ + +static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *eth, u16 payLen) +{ + int i; + u32 micSEQ; + miccntx *context; + u8 digest[4]; + mic_error micError = NONE; + + // Check if the packet is a Mic'd packet + + if (!ai->micstats.enabled) { + //No Mic set or Mic OFF but we received a MIC'd packet. + if (memcmp ((u8*)eth + 14, micsnap, sizeof(micsnap)) == 0) { + ai->micstats.rxMICPlummed++; + return ERROR; + } + return SUCCESS; + } + + if (ntohs(mic->typelen) == 0x888E) + return SUCCESS; + + if (memcmp (mic->u.snap, micsnap, sizeof(micsnap)) != 0) { + // Mic enabled but packet isn't Mic'd + ai->micstats.rxMICPlummed++; + return ERROR; + } + + micSEQ = ntohl(mic->seq); //store SEQ as CPU order + + //At this point we a have a mic'd packet and mic is enabled + //Now do the mic error checking. + + //Receive seq must be odd + if ( (micSEQ & 1) == 0 ) { + ai->micstats.rxWrongSequence++; + return ERROR; + } + + for (i = 0; i < NUM_MODULES; i++) { + int mcast = eth->da[0] & 1; + //Determine proper context + context = mcast ? &ai->mod[i].mCtx : &ai->mod[i].uCtx; + + //Make sure context is valid + if (!context->valid) { + if (i == 0) + micError = NOMICPLUMMED; + continue; + } + //DeMic it + + if (!mic->typelen) + mic->typelen = htons(payLen + sizeof(MICBuffer) - 2); + + emmh32_init(&context->seed); + emmh32_update(&context->seed, eth->da, ETH_ALEN*2); + emmh32_update(&context->seed, (u8 *)&mic->typelen, sizeof(mic->typelen)+sizeof(mic->u.snap)); + emmh32_update(&context->seed, (u8 *)&mic->seq,sizeof(mic->seq)); + emmh32_update(&context->seed, eth->da + ETH_ALEN*2,payLen); + //Calculate MIC + emmh32_final(&context->seed, digest); + + if (memcmp(digest, &mic->mic, 4)) { //Make sure the mics match + //Invalid Mic + if (i == 0) + micError = INCORRECTMIC; + continue; + } + + //Check Sequence number if mics pass + if (RxSeqValid(ai, context, mcast, micSEQ) == SUCCESS) { + ai->micstats.rxSuccess++; + return SUCCESS; + } + if (i == 0) + micError = SEQUENCE; + } + + // Update statistics + switch (micError) { + case NOMICPLUMMED: ai->micstats.rxMICPlummed++; break; + case SEQUENCE: ai->micstats.rxWrongSequence++; break; + case INCORRECTMIC: ai->micstats.rxIncorrectMIC++; break; + case NONE: break; + case NOMIC: break; + } + return ERROR; +} + +/*=========================================================================== + * Description: Checks the Rx Seq number to make sure it is valid + * and hasn't already been received + * + * Inputs: miccntx - mic context to check seq against + * micSeq - the Mic seq number + * + * Returns: TRUE if valid otherwise FALSE. + * + * Author: sbraneky (10/15/01) + * Merciless hacks by rwilcher (1/14/02) + *--------------------------------------------------------------------------- + */ + +static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq) +{ + u32 seq,index; + + //Allow for the ap being rebooted - if it is then use the next + //sequence number of the current sequence number - might go backwards + + if (mcast) { + if (test_bit(FLAG_UPDATE_MULTI, &ai->flags)) { + clear_bit (FLAG_UPDATE_MULTI, &ai->flags); + context->window = (micSeq > 33) ? micSeq : 33; + context->rx = 0; // Reset rx + } + } else if (test_bit(FLAG_UPDATE_UNI, &ai->flags)) { + clear_bit (FLAG_UPDATE_UNI, &ai->flags); + context->window = (micSeq > 33) ? micSeq : 33; // Move window + context->rx = 0; // Reset rx + } + + //Make sequence number relative to START of window + seq = micSeq - (context->window - 33); + + //Too old of a SEQ number to check. + if ((s32)seq < 0) + return ERROR; + + if ( seq > 64 ) { + //Window is infinite forward + MoveWindow(context,micSeq); + return SUCCESS; + } + + // We are in the window. Now check the context rx bit to see if it was already sent + seq >>= 1; //divide by 2 because we only have odd numbers + index = 1 << seq; //Get an index number + + if (!(context->rx & index)) { + //micSEQ falls inside the window. + //Add seqence number to the list of received numbers. + context->rx |= index; + + MoveWindow(context,micSeq); + + return SUCCESS; + } + return ERROR; +} + +static void MoveWindow(miccntx *context, u32 micSeq) +{ + u32 shift; + + //Move window if seq greater than the middle of the window + if (micSeq > context->window) { + shift = (micSeq - context->window) >> 1; + + //Shift out old + if (shift < 32) + context->rx >>= shift; + else + context->rx = 0; + + context->window = micSeq; //Move window + } +} + +/*==============================================*/ +/*========== EMMH ROUTINES ====================*/ +/*==============================================*/ + +/* mic accumulate */ +#define MIC_ACCUM(val) \ + context->accum += (u64)(val) * context->coeff[coeff_position++]; + +static unsigned char aes_counter[16]; + +/* expand the key to fill the MMH coefficient array */ +void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *tfm) +{ + /* take the keying material, expand if necessary, truncate at 16-bytes */ + /* run through AES counter mode to generate context->coeff[] */ + + int i,j; + u32 counter; + u8 *cipher, plain[16]; + struct scatterlist sg[1]; + + crypto_cipher_setkey(tfm, pkey, 16); + counter = 0; + for (i = 0; i < (sizeof(context->coeff)/sizeof(context->coeff[0])); ) { + aes_counter[15] = (u8)(counter >> 0); + aes_counter[14] = (u8)(counter >> 8); + aes_counter[13] = (u8)(counter >> 16); + aes_counter[12] = (u8)(counter >> 24); + counter++; + memcpy (plain, aes_counter, 16); + sg[0].page = virt_to_page(plain); + sg[0].offset = ((long) plain & ~PAGE_MASK); + sg[0].length = 16; + crypto_cipher_encrypt(tfm, sg, sg, 16); + cipher = kmap(sg[0].page) + sg[0].offset; + for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) { + context->coeff[i++] = ntohl(*(u32 *)&cipher[j]); + j += 4; + } + } +} + +/* prepare for calculation of a new mic */ +void emmh32_init(emmh32_context *context) +{ + /* prepare for new mic calculation */ + context->accum = 0; + context->position = 0; +} + +/* add some bytes to the mic calculation */ +void emmh32_update(emmh32_context *context, u8 *pOctets, int len) +{ + int coeff_position, byte_position; + + if (len == 0) return; + + coeff_position = context->position >> 2; + + /* deal with partial 32-bit word left over from last update */ + byte_position = context->position & 3; + if (byte_position) { + /* have a partial word in part to deal with */ + do { + if (len == 0) return; + context->part.d8[byte_position++] = *pOctets++; + context->position++; + len--; + } while (byte_position < 4); + MIC_ACCUM(htonl(context->part.d32)); + } + + /* deal with full 32-bit words */ + while (len >= 4) { + MIC_ACCUM(htonl(*(u32 *)pOctets)); + context->position += 4; + pOctets += 4; + len -= 4; + } + + /* deal with partial 32-bit word that will be left over from this update */ + byte_position = 0; + while (len > 0) { + context->part.d8[byte_position++] = *pOctets++; + context->position++; + len--; + } +} + +/* mask used to zero empty bytes for final partial word */ +static u32 mask32[4] = { 0x00000000L, 0xFF000000L, 0xFFFF0000L, 0xFFFFFF00L }; + +/* calculate the mic */ +void emmh32_final(emmh32_context *context, u8 digest[4]) +{ + int coeff_position, byte_position; + u32 val; + + u64 sum, utmp; + s64 stmp; + + coeff_position = context->position >> 2; + + /* deal with partial 32-bit word left over from last update */ + byte_position = context->position & 3; + if (byte_position) { + /* have a partial word in part to deal with */ + val = htonl(context->part.d32); + MIC_ACCUM(val & mask32[byte_position]); /* zero empty bytes */ + } + + /* reduce the accumulated u64 to a 32-bit MIC */ + sum = context->accum; + stmp = (sum & 0xffffffffLL) - ((sum >> 32) * 15); + utmp = (stmp & 0xffffffffLL) - ((stmp >> 32) * 15); + sum = utmp & 0xffffffffLL; + if (utmp > 0x10000000fLL) + sum -= 15; + + val = (u32)sum; + digest[0] = (val>>24) & 0xFF; + digest[1] = (val>>16) & 0xFF; + digest[2] = (val>>8) & 0xFF; + digest[3] = val & 0xFF; +} +#endif + +static int readBSSListRid(struct airo_info *ai, int first, + BSSListRid *list) { + int rc; + Cmd cmd; + Resp rsp; + + if (first == 1) { + if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN; + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd=CMD_LISTBSS; + if (down_interruptible(&ai->sem)) + return -ERESTARTSYS; + issuecommand(ai, &cmd, &rsp); + up(&ai->sem); + /* Let the command take effect */ + ai->task = current; + ssleep(3); + ai->task = NULL; + } + rc = PC4500_readrid(ai, first ? RID_BSSLISTFIRST : RID_BSSLISTNEXT, + list, sizeof(*list), 1); + + list->len = le16_to_cpu(list->len); + list->index = le16_to_cpu(list->index); + list->radioType = le16_to_cpu(list->radioType); + list->cap = le16_to_cpu(list->cap); + list->beaconInterval = le16_to_cpu(list->beaconInterval); + list->fh.dwell = le16_to_cpu(list->fh.dwell); + list->dsChannel = le16_to_cpu(list->dsChannel); + list->atimWindow = le16_to_cpu(list->atimWindow); + return rc; +} + +static int readWepKeyRid(struct airo_info*ai, WepKeyRid *wkr, int temp, int lock) { + int rc = PC4500_readrid(ai, temp ? RID_WEP_TEMP : RID_WEP_PERM, + wkr, sizeof(*wkr), lock); + + wkr->len = le16_to_cpu(wkr->len); + wkr->kindex = le16_to_cpu(wkr->kindex); + wkr->klen = le16_to_cpu(wkr->klen); + return rc; +} +/* In the writeXXXRid routines we copy the rids so that we don't screwup + * the originals when we endian them... */ +static int writeWepKeyRid(struct airo_info*ai, WepKeyRid *pwkr, int perm, int lock) { + int rc; + WepKeyRid wkr = *pwkr; + + wkr.len = cpu_to_le16(wkr.len); + wkr.kindex = cpu_to_le16(wkr.kindex); + wkr.klen = cpu_to_le16(wkr.klen); + rc = PC4500_writerid(ai, RID_WEP_TEMP, &wkr, sizeof(wkr), lock); + if (rc!=SUCCESS) printk(KERN_ERR "airo: WEP_TEMP set %x\n", rc); + if (perm) { + rc = PC4500_writerid(ai, RID_WEP_PERM, &wkr, sizeof(wkr), lock); + if (rc!=SUCCESS) { + printk(KERN_ERR "airo: WEP_PERM set %x\n", rc); + } + } + return rc; +} + +static int readSsidRid(struct airo_info*ai, SsidRid *ssidr) { + int i; + int rc = PC4500_readrid(ai, RID_SSID, ssidr, sizeof(*ssidr), 1); + + ssidr->len = le16_to_cpu(ssidr->len); + for(i = 0; i < 3; i++) { + ssidr->ssids[i].len = le16_to_cpu(ssidr->ssids[i].len); + } + return rc; +} +static int writeSsidRid(struct airo_info*ai, SsidRid *pssidr, int lock) { + int rc; + int i; + SsidRid ssidr = *pssidr; + + ssidr.len = cpu_to_le16(ssidr.len); + for(i = 0; i < 3; i++) { + ssidr.ssids[i].len = cpu_to_le16(ssidr.ssids[i].len); + } + rc = PC4500_writerid(ai, RID_SSID, &ssidr, sizeof(ssidr), lock); + return rc; +} +static int readConfigRid(struct airo_info*ai, int lock) { + int rc; + u16 *s; + ConfigRid cfg; + + if (ai->config.len) + return SUCCESS; + + rc = PC4500_readrid(ai, RID_ACTUALCONFIG, &cfg, sizeof(cfg), lock); + if (rc != SUCCESS) + return rc; + + for(s = &cfg.len; s <= &cfg.rtsThres; s++) *s = le16_to_cpu(*s); + + for(s = &cfg.shortRetryLimit; s <= &cfg.radioType; s++) + *s = le16_to_cpu(*s); + + for(s = &cfg.txPower; s <= &cfg.radioSpecific; s++) + *s = le16_to_cpu(*s); + + for(s = &cfg.arlThreshold; s <= &cfg._reserved4[0]; s++) + *s = cpu_to_le16(*s); + + for(s = &cfg.autoWake; s <= &cfg.autoWake; s++) + *s = cpu_to_le16(*s); + + ai->config = cfg; + return SUCCESS; +} +static inline void checkThrottle(struct airo_info *ai) { + int i; +/* Old hardware had a limit on encryption speed */ + if (ai->config.authType != AUTH_OPEN && maxencrypt) { + for(i=0; i<8; i++) { + if (ai->config.rates[i] > maxencrypt) { + ai->config.rates[i] = 0; + } + } + } +} +static int writeConfigRid(struct airo_info*ai, int lock) { + u16 *s; + ConfigRid cfgr; + + if (!test_bit (FLAG_COMMIT, &ai->flags)) + return SUCCESS; + + clear_bit (FLAG_COMMIT, &ai->flags); + clear_bit (FLAG_RESET, &ai->flags); + checkThrottle(ai); + cfgr = ai->config; + + if ((cfgr.opmode & 0xFF) == MODE_STA_IBSS) + set_bit(FLAG_ADHOC, &ai->flags); + else + clear_bit(FLAG_ADHOC, &ai->flags); + + for(s = &cfgr.len; s <= &cfgr.rtsThres; s++) *s = cpu_to_le16(*s); + + for(s = &cfgr.shortRetryLimit; s <= &cfgr.radioType; s++) + *s = cpu_to_le16(*s); + + for(s = &cfgr.txPower; s <= &cfgr.radioSpecific; s++) + *s = cpu_to_le16(*s); + + for(s = &cfgr.arlThreshold; s <= &cfgr._reserved4[0]; s++) + *s = cpu_to_le16(*s); + + for(s = &cfgr.autoWake; s <= &cfgr.autoWake; s++) + *s = cpu_to_le16(*s); + + return PC4500_writerid( ai, RID_CONFIG, &cfgr, sizeof(cfgr), lock); +} +static int readStatusRid(struct airo_info*ai, StatusRid *statr, int lock) { + int rc = PC4500_readrid(ai, RID_STATUS, statr, sizeof(*statr), lock); + u16 *s; + + statr->len = le16_to_cpu(statr->len); + for(s = &statr->mode; s <= &statr->SSIDlen; s++) *s = le16_to_cpu(*s); + + for(s = &statr->beaconPeriod; s <= &statr->shortPreamble; s++) + *s = le16_to_cpu(*s); + statr->load = le16_to_cpu(statr->load); + statr->assocStatus = le16_to_cpu(statr->assocStatus); + return rc; +} +static int readAPListRid(struct airo_info*ai, APListRid *aplr) { + int rc = PC4500_readrid(ai, RID_APLIST, aplr, sizeof(*aplr), 1); + aplr->len = le16_to_cpu(aplr->len); + return rc; +} +static int writeAPListRid(struct airo_info*ai, APListRid *aplr, int lock) { + int rc; + aplr->len = cpu_to_le16(aplr->len); + rc = PC4500_writerid(ai, RID_APLIST, aplr, sizeof(*aplr), lock); + return rc; +} +static int readCapabilityRid(struct airo_info*ai, CapabilityRid *capr, int lock) { + int rc = PC4500_readrid(ai, RID_CAPABILITIES, capr, sizeof(*capr), lock); + u16 *s; + + capr->len = le16_to_cpu(capr->len); + capr->prodNum = le16_to_cpu(capr->prodNum); + capr->radioType = le16_to_cpu(capr->radioType); + capr->country = le16_to_cpu(capr->country); + for(s = &capr->txPowerLevels[0]; s <= &capr->requiredHard; s++) + *s = le16_to_cpu(*s); + return rc; +} +static int readStatsRid(struct airo_info*ai, StatsRid *sr, int rid, int lock) { + int rc = PC4500_readrid(ai, rid, sr, sizeof(*sr), lock); + u32 *i; + + sr->len = le16_to_cpu(sr->len); + for(i = &sr->vals[0]; i <= &sr->vals[99]; i++) *i = le32_to_cpu(*i); + return rc; +} + +static int airo_open(struct net_device *dev) { + struct airo_info *info = dev->priv; + Resp rsp; + + if (test_bit(FLAG_FLASHING, &info->flags)) + return -EIO; + + /* Make sure the card is configured. + * Wireless Extensions may postpone config changes until the card + * is open (to pipeline changes and speed-up card setup). If + * those changes are not yet commited, do it now - Jean II */ + if (test_bit (FLAG_COMMIT, &info->flags)) { + disable_MAC(info, 1); + writeConfigRid(info, 1); + } + + if (info->wifidev != dev) { + /* Power on the MAC controller (which may have been disabled) */ + clear_bit(FLAG_RADIO_DOWN, &info->flags); + enable_interrupts(info); + } + enable_MAC(info, &rsp, 1); + + netif_start_queue(dev); + return 0; +} + +static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) { + int npacks, pending; + unsigned long flags; + struct airo_info *ai = dev->priv; + + if (!skb) { + printk(KERN_ERR "airo: %s: skb==NULL\n",__FUNCTION__); + return 0; + } + npacks = skb_queue_len (&ai->txq); + + if (npacks >= MAXTXQ - 1) { + netif_stop_queue (dev); + if (npacks > MAXTXQ) { + ai->stats.tx_fifo_errors++; + return 1; + } + skb_queue_tail (&ai->txq, skb); + return 0; + } + + spin_lock_irqsave(&ai->aux_lock, flags); + skb_queue_tail (&ai->txq, skb); + pending = test_bit(FLAG_PENDING_XMIT, &ai->flags); + spin_unlock_irqrestore(&ai->aux_lock,flags); + netif_wake_queue (dev); + + if (pending == 0) { + set_bit(FLAG_PENDING_XMIT, &ai->flags); + mpi_send_packet (dev); + } + return 0; +} + +/* + * @mpi_send_packet + * + * Attempt to transmit a packet. Can be called from interrupt + * or transmit . return number of packets we tried to send + */ + +static int mpi_send_packet (struct net_device *dev) +{ + struct sk_buff *skb; + unsigned char *buffer; + s16 len, *payloadLen; + struct airo_info *ai = dev->priv; + u8 *sendbuf; + + /* get a packet to send */ + + if ((skb = skb_dequeue(&ai->txq)) == 0) { + printk (KERN_ERR + "airo: %s: Dequeue'd zero in send_packet()\n", + __FUNCTION__); + return 0; + } + + /* check min length*/ + len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + buffer = skb->data; + + ai->txfids[0].tx_desc.offset = 0; + ai->txfids[0].tx_desc.valid = 1; + ai->txfids[0].tx_desc.eoc = 1; + ai->txfids[0].tx_desc.len =len+sizeof(WifiHdr); + +/* + * Magic, the cards firmware needs a length count (2 bytes) in the host buffer + * right after TXFID_HDR.The TXFID_HDR contains the status short so payloadlen + * is immediatly after it. ------------------------------------------------ + * |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA| + * ------------------------------------------------ + */ + + memcpy((char *)ai->txfids[0].virtual_host_addr, + (char *)&wifictlhdr8023, sizeof(wifictlhdr8023)); + + payloadLen = (s16 *)(ai->txfids[0].virtual_host_addr + + sizeof(wifictlhdr8023)); + sendbuf = ai->txfids[0].virtual_host_addr + + sizeof(wifictlhdr8023) + 2 ; + + /* + * Firmware automaticly puts 802 header on so + * we don't need to account for it in the length + */ +#ifdef MICSUPPORT + if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled && + (ntohs(((u16 *)buffer)[6]) != 0x888E)) { + MICBuffer pMic; + + if (encapsulate(ai, (etherHead *)buffer, &pMic, len - sizeof(etherHead)) != SUCCESS) + return ERROR; + + *payloadLen = cpu_to_le16(len-sizeof(etherHead)+sizeof(pMic)); + ai->txfids[0].tx_desc.len += sizeof(pMic); + /* copy data into airo dma buffer */ + memcpy (sendbuf, buffer, sizeof(etherHead)); + buffer += sizeof(etherHead); + sendbuf += sizeof(etherHead); + memcpy (sendbuf, &pMic, sizeof(pMic)); + sendbuf += sizeof(pMic); + memcpy (sendbuf, buffer, len - sizeof(etherHead)); + } else +#endif + { + *payloadLen = cpu_to_le16(len - sizeof(etherHead)); + + dev->trans_start = jiffies; + + /* copy data into airo dma buffer */ + memcpy(sendbuf, buffer, len); + } + + memcpy_toio(ai->txfids[0].card_ram_off, + &ai->txfids[0].tx_desc, sizeof(TxFid)); + + OUT4500(ai, EVACK, 8); + + dev_kfree_skb_any(skb); + return 1; +} + +static void get_tx_error(struct airo_info *ai, u32 fid) +{ + u16 status; + + if (fid < 0) + status = ((WifiCtlHdr *)ai->txfids[0].virtual_host_addr)->ctlhdr.status; + else { + if (bap_setup(ai, ai->fids[fid] & 0xffff, 4, BAP0) != SUCCESS) + return; + bap_read(ai, &status, 2, BAP0); + } + if (le16_to_cpu(status) & 2) /* Too many retries */ + ai->stats.tx_aborted_errors++; + if (le16_to_cpu(status) & 4) /* Transmit lifetime exceeded */ + ai->stats.tx_heartbeat_errors++; + if (le16_to_cpu(status) & 8) /* Aid fail */ + { } + if (le16_to_cpu(status) & 0x10) /* MAC disabled */ + ai->stats.tx_carrier_errors++; + if (le16_to_cpu(status) & 0x20) /* Association lost */ + { } + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + if ((le16_to_cpu(status) & 2) || + (le16_to_cpu(status) & 4)) { + union iwreq_data wrqu; + char junk[0x18]; + + /* Faster to skip over useless data than to do + * another bap_setup(). We are at offset 0x6 and + * need to go to 0x18 and read 6 bytes - Jean II */ + bap_read(ai, (u16 *) junk, 0x18, BAP0); + + /* Copy 802.11 dest address. + * We use the 802.11 header because the frame may + * not be 802.3 or may be mangled... + * In Ad-Hoc mode, it will be the node address. + * In managed mode, it will be most likely the AP addr + * User space will figure out how to convert it to + * whatever it needs (IP address or else). + * - Jean II */ + memcpy(wrqu.addr.sa_data, junk + 0x12, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(ai->dev, IWEVTXDROP, &wrqu, NULL); + } +} + +static void airo_end_xmit(struct net_device *dev) { + u16 status; + int i; + struct airo_info *priv = dev->priv; + struct sk_buff *skb = priv->xmit.skb; + int fid = priv->xmit.fid; + u32 *fids = priv->fids; + + clear_bit(JOB_XMIT, &priv->flags); + clear_bit(FLAG_PENDING_XMIT, &priv->flags); + status = transmit_802_3_packet (priv, fids[fid], skb->data); + up(&priv->sem); + + i = 0; + if ( status == SUCCESS ) { + dev->trans_start = jiffies; + for (; i < MAX_FIDS / 2 && (priv->fids[i] & 0xffff0000); i++); + } else { + priv->fids[fid] &= 0xffff; + priv->stats.tx_window_errors++; + } + if (i < MAX_FIDS / 2) + netif_wake_queue(dev); + dev_kfree_skb(skb); +} + +static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) { + s16 len; + int i, j; + struct airo_info *priv = dev->priv; + u32 *fids = priv->fids; + + if ( skb == NULL ) { + printk( KERN_ERR "airo: skb == NULL!!!\n" ); + return 0; + } + + /* Find a vacant FID */ + for( i = 0; i < MAX_FIDS / 2 && (fids[i] & 0xffff0000); i++ ); + for( j = i + 1; j < MAX_FIDS / 2 && (fids[j] & 0xffff0000); j++ ); + + if ( j >= MAX_FIDS / 2 ) { + netif_stop_queue(dev); + + if (i == MAX_FIDS / 2) { + priv->stats.tx_fifo_errors++; + return 1; + } + } + /* check min length*/ + len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + /* Mark fid as used & save length for later */ + fids[i] |= (len << 16); + priv->xmit.skb = skb; + priv->xmit.fid = i; + if (down_trylock(&priv->sem) != 0) { + set_bit(FLAG_PENDING_XMIT, &priv->flags); + netif_stop_queue(dev); + set_bit(JOB_XMIT, &priv->flags); + wake_up_interruptible(&priv->thr_wait); + } else + airo_end_xmit(dev); + return 0; +} + +static void airo_end_xmit11(struct net_device *dev) { + u16 status; + int i; + struct airo_info *priv = dev->priv; + struct sk_buff *skb = priv->xmit11.skb; + int fid = priv->xmit11.fid; + u32 *fids = priv->fids; + + clear_bit(JOB_XMIT11, &priv->flags); + clear_bit(FLAG_PENDING_XMIT11, &priv->flags); + status = transmit_802_11_packet (priv, fids[fid], skb->data); + up(&priv->sem); + + i = MAX_FIDS / 2; + if ( status == SUCCESS ) { + dev->trans_start = jiffies; + for (; i < MAX_FIDS && (priv->fids[i] & 0xffff0000); i++); + } else { + priv->fids[fid] &= 0xffff; + priv->stats.tx_window_errors++; + } + if (i < MAX_FIDS) + netif_wake_queue(dev); + dev_kfree_skb(skb); +} + +static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) { + s16 len; + int i, j; + struct airo_info *priv = dev->priv; + u32 *fids = priv->fids; + + if (test_bit(FLAG_MPI, &priv->flags)) { + /* Not implemented yet for MPI350 */ + netif_stop_queue(dev); + return -ENETDOWN; + } + + if ( skb == NULL ) { + printk( KERN_ERR "airo: skb == NULL!!!\n" ); + return 0; + } + + /* Find a vacant FID */ + for( i = MAX_FIDS / 2; i < MAX_FIDS && (fids[i] & 0xffff0000); i++ ); + for( j = i + 1; j < MAX_FIDS && (fids[j] & 0xffff0000); j++ ); + + if ( j >= MAX_FIDS ) { + netif_stop_queue(dev); + + if (i == MAX_FIDS) { + priv->stats.tx_fifo_errors++; + return 1; + } + } + /* check min length*/ + len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + /* Mark fid as used & save length for later */ + fids[i] |= (len << 16); + priv->xmit11.skb = skb; + priv->xmit11.fid = i; + if (down_trylock(&priv->sem) != 0) { + set_bit(FLAG_PENDING_XMIT11, &priv->flags); + netif_stop_queue(dev); + set_bit(JOB_XMIT11, &priv->flags); + wake_up_interruptible(&priv->thr_wait); + } else + airo_end_xmit11(dev); + return 0; +} + +static void airo_read_stats(struct airo_info *ai) { + StatsRid stats_rid; + u32 *vals = stats_rid.vals; + + clear_bit(JOB_STATS, &ai->flags); + if (ai->power) { + up(&ai->sem); + return; + } + readStatsRid(ai, &stats_rid, RID_STATS, 0); + up(&ai->sem); + + ai->stats.rx_packets = vals[43] + vals[44] + vals[45]; + ai->stats.tx_packets = vals[39] + vals[40] + vals[41]; + ai->stats.rx_bytes = vals[92]; + ai->stats.tx_bytes = vals[91]; + ai->stats.rx_errors = vals[0] + vals[2] + vals[3] + vals[4]; + ai->stats.tx_errors = vals[42] + ai->stats.tx_fifo_errors; + ai->stats.multicast = vals[43]; + ai->stats.collisions = vals[89]; + + /* detailed rx_errors: */ + ai->stats.rx_length_errors = vals[3]; + ai->stats.rx_crc_errors = vals[4]; + ai->stats.rx_frame_errors = vals[2]; + ai->stats.rx_fifo_errors = vals[0]; +} + +struct net_device_stats *airo_get_stats(struct net_device *dev) +{ + struct airo_info *local = dev->priv; + + if (!test_bit(JOB_STATS, &local->flags)) { + /* Get stats out of the card if available */ + if (down_trylock(&local->sem) != 0) { + set_bit(JOB_STATS, &local->flags); + wake_up_interruptible(&local->thr_wait); + } else + airo_read_stats(local); + } + + return &local->stats; +} + +static void airo_set_promisc(struct airo_info *ai) { + Cmd cmd; + Resp rsp; + + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd=CMD_SETMODE; + clear_bit(JOB_PROMISC, &ai->flags); + cmd.parm0=(ai->flags&IFF_PROMISC) ? PROMISC : NOPROMISC; + issuecommand(ai, &cmd, &rsp); + up(&ai->sem); +} + +static void airo_set_multicast_list(struct net_device *dev) { + struct airo_info *ai = dev->priv; + + if ((dev->flags ^ ai->flags) & IFF_PROMISC) { + change_bit(FLAG_PROMISC, &ai->flags); + if (down_trylock(&ai->sem) != 0) { + set_bit(JOB_PROMISC, &ai->flags); + wake_up_interruptible(&ai->thr_wait); + } else + airo_set_promisc(ai); + } + + if ((dev->flags&IFF_ALLMULTI)||dev->mc_count>0) { + /* Turn on multicast. (Should be already setup...) */ + } +} + +static int airo_set_mac_address(struct net_device *dev, void *p) +{ + struct airo_info *ai = dev->priv; + struct sockaddr *addr = p; + Resp rsp; + + readConfigRid(ai, 1); + memcpy (ai->config.macAddr, addr->sa_data, dev->addr_len); + set_bit (FLAG_COMMIT, &ai->flags); + disable_MAC(ai, 1); + writeConfigRid (ai, 1); + enable_MAC(ai, &rsp, 1); + memcpy (ai->dev->dev_addr, addr->sa_data, dev->addr_len); + if (ai->wifidev) + memcpy (ai->wifidev->dev_addr, addr->sa_data, dev->addr_len); + return 0; +} + +static int airo_change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 68) || (new_mtu > 2400)) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + + +static int airo_close(struct net_device *dev) { + struct airo_info *ai = dev->priv; + + netif_stop_queue(dev); + + if (ai->wifidev != dev) { +#ifdef POWER_ON_DOWN + /* Shut power to the card. The idea is that the user can save + * power when he doesn't need the card with "ifconfig down". + * That's the method that is most friendly towards the network + * stack (i.e. the network stack won't try to broadcast + * anything on the interface and routes are gone. Jean II */ + set_bit(FLAG_RADIO_DOWN, &ai->flags); + disable_MAC(ai, 1); +#endif + disable_interrupts( ai ); + } + return 0; +} + +static void del_airo_dev( struct net_device *dev ); + +void stop_airo_card( struct net_device *dev, int freeres ) +{ + struct airo_info *ai = dev->priv; + + set_bit(FLAG_RADIO_DOWN, &ai->flags); + disable_MAC(ai, 1); + disable_interrupts(ai); + free_irq( dev->irq, dev ); + takedown_proc_entry( dev, ai ); + if (test_bit(FLAG_REGISTERED, &ai->flags)) { + unregister_netdev( dev ); + if (ai->wifidev) { + unregister_netdev(ai->wifidev); + free_netdev(ai->wifidev); + ai->wifidev = NULL; + } + clear_bit(FLAG_REGISTERED, &ai->flags); + } + set_bit(JOB_DIE, &ai->flags); + kill_proc(ai->thr_pid, SIGTERM, 1); + wait_for_completion(&ai->thr_exited); + + /* + * Clean out tx queue + */ + if (test_bit(FLAG_MPI, &ai->flags) && skb_queue_len (&ai->txq) > 0) { + struct sk_buff *skb = NULL; + for (;(skb = skb_dequeue(&ai->txq));) + dev_kfree_skb(skb); + } + + if (ai->flash) + kfree(ai->flash); + if (ai->rssi) + kfree(ai->rssi); + if (ai->APList) + kfree(ai->APList); + if (ai->SSID) + kfree(ai->SSID); + if (freeres) { + /* PCMCIA frees this stuff, so only for PCI and ISA */ + release_region( dev->base_addr, 64 ); + if (test_bit(FLAG_MPI, &ai->flags)) { + if (ai->pci) + mpi_unmap_card(ai->pci); + if (ai->pcimem) + iounmap(ai->pcimem); + if (ai->pciaux) + iounmap(ai->pciaux); + pci_free_consistent(ai->pci, PCI_SHARED_LEN, + ai->shared, ai->shared_dma); + } + } +#ifdef MICSUPPORT + if (ai->tfm) + crypto_free_tfm(ai->tfm); +#endif + del_airo_dev( dev ); + free_netdev( dev ); +} + +EXPORT_SYMBOL(stop_airo_card); + +static int add_airo_dev( struct net_device *dev ); + +int wll_header_parse(struct sk_buff *skb, unsigned char *haddr) +{ + memcpy(haddr, skb->mac.raw + 10, ETH_ALEN); + return ETH_ALEN; +} + +static void mpi_unmap_card(struct pci_dev *pci) +{ + unsigned long mem_start = pci_resource_start(pci, 1); + unsigned long mem_len = pci_resource_len(pci, 1); + unsigned long aux_start = pci_resource_start(pci, 2); + unsigned long aux_len = AUXMEMSIZE; + + release_mem_region(aux_start, aux_len); + release_mem_region(mem_start, mem_len); +} + +/************************************************************* + * This routine assumes that descriptors have been setup . + * Run at insmod time or after reset when the decriptors + * have been initialized . Returns 0 if all is well nz + * otherwise . Does not allocate memory but sets up card + * using previously allocated descriptors. + */ +static int mpi_init_descriptors (struct airo_info *ai) +{ + Cmd cmd; + Resp rsp; + int i; + int rc = SUCCESS; + + /* Alloc card RX descriptors */ + netif_stop_queue(ai->dev); + + memset(&rsp,0,sizeof(rsp)); + memset(&cmd,0,sizeof(cmd)); + + cmd.cmd = CMD_ALLOCATEAUX; + cmd.parm0 = FID_RX; + cmd.parm1 = (ai->rxfids[0].card_ram_off - ai->pciaux); + cmd.parm2 = MPI_MAX_FIDS; + rc=issuecommand(ai, &cmd, &rsp); + if (rc != SUCCESS) { + printk(KERN_ERR "airo: Couldn't allocate RX FID\n"); + return rc; + } + + for (i=0; i<MPI_MAX_FIDS; i++) { + memcpy_toio(ai->rxfids[i].card_ram_off, + &ai->rxfids[i].rx_desc, sizeof(RxFid)); + } + + /* Alloc card TX descriptors */ + + memset(&rsp,0,sizeof(rsp)); + memset(&cmd,0,sizeof(cmd)); + + cmd.cmd = CMD_ALLOCATEAUX; + cmd.parm0 = FID_TX; + cmd.parm1 = (ai->txfids[0].card_ram_off - ai->pciaux); + cmd.parm2 = MPI_MAX_FIDS; + + for (i=0; i<MPI_MAX_FIDS; i++) { + ai->txfids[i].tx_desc.valid = 1; + memcpy_toio(ai->txfids[i].card_ram_off, + &ai->txfids[i].tx_desc, sizeof(TxFid)); + } + ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */ + + rc=issuecommand(ai, &cmd, &rsp); + if (rc != SUCCESS) { + printk(KERN_ERR "airo: Couldn't allocate TX FID\n"); + return rc; + } + + /* Alloc card Rid descriptor */ + memset(&rsp,0,sizeof(rsp)); + memset(&cmd,0,sizeof(cmd)); + + cmd.cmd = CMD_ALLOCATEAUX; + cmd.parm0 = RID_RW; + cmd.parm1 = (ai->config_desc.card_ram_off - ai->pciaux); + cmd.parm2 = 1; /* Magic number... */ + rc=issuecommand(ai, &cmd, &rsp); + if (rc != SUCCESS) { + printk(KERN_ERR "airo: Couldn't allocate RID\n"); + return rc; + } + + memcpy_toio(ai->config_desc.card_ram_off, + &ai->config_desc.rid_desc, sizeof(Rid)); + + return rc; +} + +/* + * We are setting up three things here: + * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid. + * 2) Map PCI memory for issueing commands. + * 3) Allocate memory (shared) to send and receive ethernet frames. + */ +static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, + const char *name) +{ + unsigned long mem_start, mem_len, aux_start, aux_len; + int rc = -1; + int i; + unsigned char *busaddroff,*vpackoff; + unsigned char __iomem *pciaddroff; + + mem_start = pci_resource_start(pci, 1); + mem_len = pci_resource_len(pci, 1); + aux_start = pci_resource_start(pci, 2); + aux_len = AUXMEMSIZE; + + if (!request_mem_region(mem_start, mem_len, name)) { + printk(KERN_ERR "airo: Couldn't get region %x[%x] for %s\n", + (int)mem_start, (int)mem_len, name); + goto out; + } + if (!request_mem_region(aux_start, aux_len, name)) { + printk(KERN_ERR "airo: Couldn't get region %x[%x] for %s\n", + (int)aux_start, (int)aux_len, name); + goto free_region1; + } + + ai->pcimem = ioremap(mem_start, mem_len); + if (!ai->pcimem) { + printk(KERN_ERR "airo: Couldn't map region %x[%x] for %s\n", + (int)mem_start, (int)mem_len, name); + goto free_region2; + } + ai->pciaux = ioremap(aux_start, aux_len); + if (!ai->pciaux) { + printk(KERN_ERR "airo: Couldn't map region %x[%x] for %s\n", + (int)aux_start, (int)aux_len, name); + goto free_memmap; + } + + /* Reserve PKTSIZE for each fid and 2K for the Rids */ + ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma); + if (!ai->shared) { + printk(KERN_ERR "airo: Couldn't alloc_consistent %d\n", + PCI_SHARED_LEN); + goto free_auxmap; + } + + /* + * Setup descriptor RX, TX, CONFIG + */ + busaddroff = (unsigned char *)ai->shared_dma; + pciaddroff = ai->pciaux + AUX_OFFSET; + vpackoff = ai->shared; + + /* RX descriptor setup */ + for(i = 0; i < MPI_MAX_FIDS; i++) { + ai->rxfids[i].pending = 0; + ai->rxfids[i].card_ram_off = pciaddroff; + ai->rxfids[i].virtual_host_addr = vpackoff; + ai->rxfids[i].rx_desc.host_addr = (dma_addr_t) busaddroff; + ai->rxfids[i].rx_desc.valid = 1; + ai->rxfids[i].rx_desc.len = PKTSIZE; + ai->rxfids[i].rx_desc.rdy = 0; + + pciaddroff += sizeof(RxFid); + busaddroff += PKTSIZE; + vpackoff += PKTSIZE; + } + + /* TX descriptor setup */ + for(i = 0; i < MPI_MAX_FIDS; i++) { + ai->txfids[i].card_ram_off = pciaddroff; + ai->txfids[i].virtual_host_addr = vpackoff; + ai->txfids[i].tx_desc.valid = 1; + ai->txfids[i].tx_desc.host_addr = (dma_addr_t) busaddroff; + memcpy(ai->txfids[i].virtual_host_addr, + &wifictlhdr8023, sizeof(wifictlhdr8023)); + + pciaddroff += sizeof(TxFid); + busaddroff += PKTSIZE; + vpackoff += PKTSIZE; + } + ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */ + + /* Rid descriptor setup */ + ai->config_desc.card_ram_off = pciaddroff; + ai->config_desc.virtual_host_addr = vpackoff; + ai->config_desc.rid_desc.host_addr = (dma_addr_t) busaddroff; + ai->ridbus = (dma_addr_t)busaddroff; + ai->config_desc.rid_desc.rid = 0; + ai->config_desc.rid_desc.len = RIDSIZE; + ai->config_desc.rid_desc.valid = 1; + pciaddroff += sizeof(Rid); + busaddroff += RIDSIZE; + vpackoff += RIDSIZE; + + /* Tell card about descriptors */ + if (mpi_init_descriptors (ai) != SUCCESS) + goto free_shared; + + return 0; + free_shared: + pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma); + free_auxmap: + iounmap(ai->pciaux); + free_memmap: + iounmap(ai->pcimem); + free_region2: + release_mem_region(aux_start, aux_len); + free_region1: + release_mem_region(mem_start, mem_len); + out: + return rc; +} + +static void wifi_setup(struct net_device *dev) +{ + dev->hard_header = NULL; + dev->rebuild_header = NULL; + dev->hard_header_cache = NULL; + dev->header_cache_update= NULL; + + dev->hard_header_parse = wll_header_parse; + dev->hard_start_xmit = &airo_start_xmit11; + dev->get_stats = &airo_get_stats; + dev->set_mac_address = &airo_set_mac_address; + dev->do_ioctl = &airo_ioctl; +#ifdef WIRELESS_EXT + dev->wireless_handlers = &airo_handler_def; +#endif /* WIRELESS_EXT */ + dev->change_mtu = &airo_change_mtu; + dev->open = &airo_open; + dev->stop = &airo_close; + + dev->type = ARPHRD_IEEE80211; + dev->hard_header_len = ETH_HLEN; + dev->mtu = 2312; + dev->addr_len = ETH_ALEN; + dev->tx_queue_len = 100; + + memset(dev->broadcast,0xFF, ETH_ALEN); + + dev->flags = IFF_BROADCAST|IFF_MULTICAST; +} + +static struct net_device *init_wifidev(struct airo_info *ai, + struct net_device *ethdev) +{ + int err; + struct net_device *dev = alloc_netdev(0, "wifi%d", wifi_setup); + if (!dev) + return NULL; + dev->priv = ethdev->priv; + dev->irq = ethdev->irq; + dev->base_addr = ethdev->base_addr; +#ifdef WIRELESS_EXT + dev->wireless_data = ethdev->wireless_data; +#endif /* WIRELESS_EXT */ + memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len); + err = register_netdev(dev); + if (err<0) { + free_netdev(dev); + return NULL; + } + return dev; +} + +int reset_card( struct net_device *dev , int lock) { + struct airo_info *ai = dev->priv; + + if (lock && down_interruptible(&ai->sem)) + return -1; + waitbusy (ai); + OUT4500(ai,COMMAND,CMD_SOFTRESET); + msleep(200); + waitbusy (ai); + msleep(200); + if (lock) + up(&ai->sem); + return 0; +} + +struct net_device *_init_airo_card( unsigned short irq, int port, + int is_pcmcia, struct pci_dev *pci, + struct device *dmdev ) +{ + struct net_device *dev; + struct airo_info *ai; + int i, rc; + + /* Create the network device object. */ + dev = alloc_etherdev(sizeof(*ai)); + if (!dev) { + printk(KERN_ERR "airo: Couldn't alloc_etherdev\n"); + return NULL; + } + if (dev_alloc_name(dev, dev->name) < 0) { + printk(KERN_ERR "airo: Couldn't get name!\n"); + goto err_out_free; + } + + ai = dev->priv; + ai->wifidev = NULL; + ai->flags = 0; + if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) { + printk(KERN_DEBUG "airo: Found an MPI350 card\n"); + set_bit(FLAG_MPI, &ai->flags); + } + ai->dev = dev; + spin_lock_init(&ai->aux_lock); + sema_init(&ai->sem, 1); + ai->config.len = 0; + ai->pci = pci; + init_waitqueue_head (&ai->thr_wait); + init_completion (&ai->thr_exited); + ai->thr_pid = kernel_thread(airo_thread, dev, CLONE_FS | CLONE_FILES); + if (ai->thr_pid < 0) + goto err_out_free; +#ifdef MICSUPPORT + ai->tfm = NULL; +#endif + rc = add_airo_dev( dev ); + if (rc) + goto err_out_thr; + + /* The Airo-specific entries in the device structure. */ + if (test_bit(FLAG_MPI,&ai->flags)) { + skb_queue_head_init (&ai->txq); + dev->hard_start_xmit = &mpi_start_xmit; + } else + dev->hard_start_xmit = &airo_start_xmit; + dev->get_stats = &airo_get_stats; + dev->set_multicast_list = &airo_set_multicast_list; + dev->set_mac_address = &airo_set_mac_address; + dev->do_ioctl = &airo_ioctl; +#ifdef WIRELESS_EXT + dev->wireless_handlers = &airo_handler_def; + ai->wireless_data.spy_data = &ai->spy_data; + dev->wireless_data = &ai->wireless_data; +#endif /* WIRELESS_EXT */ + dev->change_mtu = &airo_change_mtu; + dev->open = &airo_open; + dev->stop = &airo_close; + dev->irq = irq; + dev->base_addr = port; + + SET_NETDEV_DEV(dev, dmdev); + + + if (test_bit(FLAG_MPI,&ai->flags)) + reset_card (dev, 1); + + rc = request_irq( dev->irq, airo_interrupt, SA_SHIRQ, dev->name, dev ); + if (rc) { + printk(KERN_ERR "airo: register interrupt %d failed, rc %d\n", irq, rc ); + goto err_out_unlink; + } + if (!is_pcmcia) { + if (!request_region( dev->base_addr, 64, dev->name )) { + rc = -EBUSY; + printk(KERN_ERR "airo: Couldn't request region\n"); + goto err_out_irq; + } + } + + if (test_bit(FLAG_MPI,&ai->flags)) { + if (mpi_map_card(ai, pci, dev->name)) { + printk(KERN_ERR "airo: Could not map memory\n"); + goto err_out_res; + } + } + + if (probe) { + if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) { + printk( KERN_ERR "airo: MAC could not be enabled\n" ); + rc = -EIO; + goto err_out_map; + } + } else if (!test_bit(FLAG_MPI,&ai->flags)) { + ai->bap_read = fast_bap_read; + set_bit(FLAG_FLASHING, &ai->flags); + } + + rc = register_netdev(dev); + if (rc) { + printk(KERN_ERR "airo: Couldn't register_netdev\n"); + goto err_out_map; + } + ai->wifidev = init_wifidev(ai, dev); + + set_bit(FLAG_REGISTERED,&ai->flags); + printk( KERN_INFO "airo: MAC enabled %s %x:%x:%x:%x:%x:%x\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] ); + + /* Allocate the transmit buffers */ + if (probe && !test_bit(FLAG_MPI,&ai->flags)) + for( i = 0; i < MAX_FIDS; i++ ) + ai->fids[i] = transmit_allocate(ai,2312,i>=MAX_FIDS/2); + + setup_proc_entry( dev, dev->priv ); /* XXX check for failure */ + netif_start_queue(dev); + SET_MODULE_OWNER(dev); + return dev; + +err_out_map: + if (test_bit(FLAG_MPI,&ai->flags) && pci) { + pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma); + iounmap(ai->pciaux); + iounmap(ai->pcimem); + mpi_unmap_card(ai->pci); + } +err_out_res: + if (!is_pcmcia) + release_region( dev->base_addr, 64 ); +err_out_irq: + free_irq(dev->irq, dev); +err_out_unlink: + del_airo_dev(dev); +err_out_thr: + set_bit(JOB_DIE, &ai->flags); + kill_proc(ai->thr_pid, SIGTERM, 1); + wait_for_completion(&ai->thr_exited); +err_out_free: + free_netdev(dev); + return NULL; +} + +struct net_device *init_airo_card( unsigned short irq, int port, int is_pcmcia, + struct device *dmdev) +{ + return _init_airo_card ( irq, port, is_pcmcia, NULL, dmdev); +} + +EXPORT_SYMBOL(init_airo_card); + +static int waitbusy (struct airo_info *ai) { + int delay = 0; + while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) { + udelay (10); + if ((++delay % 20) == 0) + OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); + } + return delay < 10000; +} + +int reset_airo_card( struct net_device *dev ) +{ + int i; + struct airo_info *ai = dev->priv; + + if (reset_card (dev, 1)) + return -1; + + if ( setup_card(ai, dev->dev_addr, 1 ) != SUCCESS ) { + printk( KERN_ERR "airo: MAC could not be enabled\n" ); + return -1; + } + printk( KERN_INFO "airo: MAC enabled %s %x:%x:%x:%x:%x:%x\n", dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); + /* Allocate the transmit buffers if needed */ + if (!test_bit(FLAG_MPI,&ai->flags)) + for( i = 0; i < MAX_FIDS; i++ ) + ai->fids[i] = transmit_allocate (ai,2312,i>=MAX_FIDS/2); + + enable_interrupts( ai ); + netif_wake_queue(dev); + return 0; +} + +EXPORT_SYMBOL(reset_airo_card); + +static void airo_send_event(struct net_device *dev) { + struct airo_info *ai = dev->priv; + union iwreq_data wrqu; + StatusRid status_rid; + + clear_bit(JOB_EVENT, &ai->flags); + PC4500_readrid(ai, RID_STATUS, &status_rid, sizeof(status_rid), 0); + up(&ai->sem); + wrqu.data.length = 0; + wrqu.data.flags = 0; + memcpy(wrqu.ap_addr.sa_data, status_rid.bssid[0], ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); +} + +static int airo_thread(void *data) { + struct net_device *dev = data; + struct airo_info *ai = dev->priv; + int locked; + + daemonize("%s", dev->name); + allow_signal(SIGTERM); + + while(1) { + if (signal_pending(current)) + flush_signals(current); + + /* make swsusp happy with our thread */ + try_to_freeze(PF_FREEZE); + + if (test_bit(JOB_DIE, &ai->flags)) + break; + + if (ai->flags & JOB_MASK) { + locked = down_interruptible(&ai->sem); + } else { + wait_queue_t wait; + + init_waitqueue_entry(&wait, current); + add_wait_queue(&ai->thr_wait, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (ai->flags & JOB_MASK) + break; + if (ai->expires) { + if (time_after_eq(jiffies,ai->expires)){ + set_bit(JOB_AUTOWEP,&ai->flags); + break; + } + if (!signal_pending(current)) { + schedule_timeout(ai->expires - jiffies); + continue; + } + } else if (!signal_pending(current)) { + schedule(); + continue; + } + break; + } + current->state = TASK_RUNNING; + remove_wait_queue(&ai->thr_wait, &wait); + locked = 1; + } + + if (locked) + continue; + + if (test_bit(JOB_DIE, &ai->flags)) { + up(&ai->sem); + break; + } + + if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) { + up(&ai->sem); + continue; + } + + if (test_bit(JOB_XMIT, &ai->flags)) + airo_end_xmit(dev); + else if (test_bit(JOB_XMIT11, &ai->flags)) + airo_end_xmit11(dev); + else if (test_bit(JOB_STATS, &ai->flags)) + airo_read_stats(ai); + else if (test_bit(JOB_WSTATS, &ai->flags)) + airo_read_wireless_stats(ai); + else if (test_bit(JOB_PROMISC, &ai->flags)) + airo_set_promisc(ai); +#ifdef MICSUPPORT + else if (test_bit(JOB_MIC, &ai->flags)) + micinit(ai); +#endif + else if (test_bit(JOB_EVENT, &ai->flags)) + airo_send_event(dev); + else if (test_bit(JOB_AUTOWEP, &ai->flags)) + timer_func(dev); + } + complete_and_exit (&ai->thr_exited, 0); +} + +static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs) { + struct net_device *dev = (struct net_device *)dev_id; + u16 status; + u16 fid; + struct airo_info *apriv = dev->priv; + u16 savedInterrupts = 0; + int handled = 0; + + if (!netif_device_present(dev)) + return IRQ_NONE; + + for (;;) { + status = IN4500( apriv, EVSTAT ); + if ( !(status & STATUS_INTS) || status == 0xffff ) break; + + handled = 1; + + if ( status & EV_AWAKE ) { + OUT4500( apriv, EVACK, EV_AWAKE ); + OUT4500( apriv, EVACK, EV_AWAKE ); + } + + if (!savedInterrupts) { + savedInterrupts = IN4500( apriv, EVINTEN ); + OUT4500( apriv, EVINTEN, 0 ); + } + + if ( status & EV_MIC ) { + OUT4500( apriv, EVACK, EV_MIC ); +#ifdef MICSUPPORT + if (test_bit(FLAG_MIC_CAPABLE, &apriv->flags)) { + set_bit(JOB_MIC, &apriv->flags); + wake_up_interruptible(&apriv->thr_wait); + } +#endif + } + if ( status & EV_LINK ) { + union iwreq_data wrqu; + /* The link status has changed, if you want to put a + monitor hook in, do it here. (Remember that + interrupts are still disabled!) + */ + u16 newStatus = IN4500(apriv, LINKSTAT); + OUT4500( apriv, EVACK, EV_LINK); + /* Here is what newStatus means: */ +#define NOBEACON 0x8000 /* Loss of sync - missed beacons */ +#define MAXRETRIES 0x8001 /* Loss of sync - max retries */ +#define MAXARL 0x8002 /* Loss of sync - average retry level exceeded*/ +#define FORCELOSS 0x8003 /* Loss of sync - host request */ +#define TSFSYNC 0x8004 /* Loss of sync - TSF synchronization */ +#define DEAUTH 0x8100 /* Deauthentication (low byte is reason code) */ +#define DISASS 0x8200 /* Disassociation (low byte is reason code) */ +#define ASSFAIL 0x8400 /* Association failure (low byte is reason + code) */ +#define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason + code) */ +#define ASSOCIATED 0x0400 /* Assocatied */ +#define RC_RESERVED 0 /* Reserved return code */ +#define RC_NOREASON 1 /* Unspecified reason */ +#define RC_AUTHINV 2 /* Previous authentication invalid */ +#define RC_DEAUTH 3 /* Deauthenticated because sending station is + leaving */ +#define RC_NOACT 4 /* Disassociated due to inactivity */ +#define RC_MAXLOAD 5 /* Disassociated because AP is unable to handle + all currently associated stations */ +#define RC_BADCLASS2 6 /* Class 2 frame received from + non-Authenticated station */ +#define RC_BADCLASS3 7 /* Class 3 frame received from + non-Associated station */ +#define RC_STATLEAVE 8 /* Disassociated because sending station is + leaving BSS */ +#define RC_NOAUTH 9 /* Station requesting (Re)Association is not + Authenticated with the responding station */ + if (newStatus != ASSOCIATED) { + if (auto_wep && !apriv->expires) { + apriv->expires = RUN_AT(3*HZ); + wake_up_interruptible(&apriv->thr_wait); + } + } else { + struct task_struct *task = apriv->task; + if (auto_wep) + apriv->expires = 0; + if (task) + wake_up_process (task); + set_bit(FLAG_UPDATE_UNI, &apriv->flags); + set_bit(FLAG_UPDATE_MULTI, &apriv->flags); + } + /* Question : is ASSOCIATED the only status + * that is valid ? We want to catch handover + * and reassociations as valid status + * Jean II */ + if(newStatus == ASSOCIATED) { + if (apriv->scan_timestamp) { + /* Send an empty event to user space. + * We don't send the received data on + * the event because it would require + * us to do complex transcoding, and + * we want to minimise the work done in + * the irq handler. Use a request to + * extract the data - Jean II */ + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); + apriv->scan_timestamp = 0; + } + if (down_trylock(&apriv->sem) != 0) { + set_bit(JOB_EVENT, &apriv->flags); + wake_up_interruptible(&apriv->thr_wait); + } else + airo_send_event(dev); + } else { + memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL); + } + } + + /* Check to see if there is something to receive */ + if ( status & EV_RX ) { + struct sk_buff *skb = NULL; + u16 fc, len, hdrlen = 0; +#pragma pack(1) + struct { + u16 status, len; + u8 rssi[2]; + u8 rate; + u8 freq; + u16 tmp[4]; + } hdr; +#pragma pack() + u16 gap; + u16 tmpbuf[4]; + u16 *buffer; + + if (test_bit(FLAG_MPI,&apriv->flags)) { + if (test_bit(FLAG_802_11, &apriv->flags)) + mpi_receive_802_11(apriv); + else + mpi_receive_802_3(apriv); + OUT4500(apriv, EVACK, EV_RX); + goto exitrx; + } + + fid = IN4500( apriv, RXFID ); + + /* Get the packet length */ + if (test_bit(FLAG_802_11, &apriv->flags)) { + bap_setup (apriv, fid, 4, BAP0); + bap_read (apriv, (u16*)&hdr, sizeof(hdr), BAP0); + /* Bad CRC. Ignore packet */ + if (le16_to_cpu(hdr.status) & 2) + hdr.len = 0; + if (apriv->wifidev == NULL) + hdr.len = 0; + } else { + bap_setup (apriv, fid, 0x36, BAP0); + bap_read (apriv, (u16*)&hdr.len, 2, BAP0); + } + len = le16_to_cpu(hdr.len); + + if (len > 2312) { + printk( KERN_ERR "airo: Bad size %d\n", len ); + goto badrx; + } + if (len == 0) + goto badrx; + + if (test_bit(FLAG_802_11, &apriv->flags)) { + bap_read (apriv, (u16*)&fc, sizeof(fc), BAP0); + fc = le16_to_cpu(fc); + switch (fc & 0xc) { + case 4: + if ((fc & 0xe0) == 0xc0) + hdrlen = 10; + else + hdrlen = 16; + break; + case 8: + if ((fc&0x300)==0x300){ + hdrlen = 30; + break; + } + default: + hdrlen = 24; + } + } else + hdrlen = ETH_ALEN * 2; + + skb = dev_alloc_skb( len + hdrlen + 2 + 2 ); + if ( !skb ) { + apriv->stats.rx_dropped++; + goto badrx; + } + skb_reserve(skb, 2); /* This way the IP header is aligned */ + buffer = (u16*)skb_put (skb, len + hdrlen); + if (test_bit(FLAG_802_11, &apriv->flags)) { + buffer[0] = fc; + bap_read (apriv, buffer + 1, hdrlen - 2, BAP0); + if (hdrlen == 24) + bap_read (apriv, tmpbuf, 6, BAP0); + + bap_read (apriv, &gap, sizeof(gap), BAP0); + gap = le16_to_cpu(gap); + if (gap) { + if (gap <= 8) + bap_read (apriv, tmpbuf, gap, BAP0); + else + printk(KERN_ERR "airo: gaplen too big. Problems will follow...\n"); + } + bap_read (apriv, buffer + hdrlen/2, len, BAP0); + } else { +#ifdef MICSUPPORT + MICBuffer micbuf; +#endif + bap_read (apriv, buffer, ETH_ALEN*2, BAP0); +#ifdef MICSUPPORT + if (apriv->micstats.enabled) { + bap_read (apriv,(u16*)&micbuf,sizeof(micbuf),BAP0); + if (ntohs(micbuf.typelen) > 0x05DC) + bap_setup (apriv, fid, 0x44, BAP0); + else { + if (len <= sizeof(micbuf)) + goto badmic; + + len -= sizeof(micbuf); + skb_trim (skb, len + hdrlen); + } + } +#endif + bap_read(apriv,buffer+ETH_ALEN,len,BAP0); +#ifdef MICSUPPORT + if (decapsulate(apriv,&micbuf,(etherHead*)buffer,len)) { +badmic: + dev_kfree_skb_irq (skb); +#else + if (0) { +#endif +badrx: + OUT4500( apriv, EVACK, EV_RX); + goto exitrx; + } + } +#ifdef WIRELESS_SPY + if (apriv->spy_data.spy_number > 0) { + char *sa; + struct iw_quality wstats; + /* Prepare spy data : addr + qual */ + if (!test_bit(FLAG_802_11, &apriv->flags)) { + sa = (char*)buffer + 6; + bap_setup (apriv, fid, 8, BAP0); + bap_read (apriv, (u16*)hdr.rssi, 2, BAP0); + } else + sa = (char*)buffer + 10; + wstats.qual = hdr.rssi[0]; + if (apriv->rssi) + wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm; + else + wstats.level = (hdr.rssi[1] + 321) / 2; + wstats.updated = 3; + /* Update spy records */ + wireless_spy_update(dev, sa, &wstats); + } +#endif /* WIRELESS_SPY */ + OUT4500( apriv, EVACK, EV_RX); + + if (test_bit(FLAG_802_11, &apriv->flags)) { + skb->mac.raw = skb->data; + skb->pkt_type = PACKET_OTHERHOST; + skb->dev = apriv->wifidev; + skb->protocol = htons(ETH_P_802_2); + } else { + skb->dev = dev; + skb->protocol = eth_type_trans(skb,dev); + } + skb->dev->last_rx = jiffies; + skb->ip_summed = CHECKSUM_NONE; + + netif_rx( skb ); + } +exitrx: + + /* Check to see if a packet has been transmitted */ + if ( status & ( EV_TX|EV_TXCPY|EV_TXEXC ) ) { + int i; + int len = 0; + int index = -1; + + if (test_bit(FLAG_MPI,&apriv->flags)) { + unsigned long flags; + + if (status & EV_TXEXC) + get_tx_error(apriv, -1); + spin_lock_irqsave(&apriv->aux_lock, flags); + if (skb_queue_len (&apriv->txq)) { + spin_unlock_irqrestore(&apriv->aux_lock,flags); + mpi_send_packet (dev); + } else { + clear_bit(FLAG_PENDING_XMIT, &apriv->flags); + spin_unlock_irqrestore(&apriv->aux_lock,flags); + netif_wake_queue (dev); + } + OUT4500( apriv, EVACK, + status & (EV_TX|EV_TXCPY|EV_TXEXC)); + goto exittx; + } + + fid = IN4500(apriv, TXCOMPLFID); + + for( i = 0; i < MAX_FIDS; i++ ) { + if ( ( apriv->fids[i] & 0xffff ) == fid ) { + len = apriv->fids[i] >> 16; + index = i; + } + } + if (index != -1) { + if (status & EV_TXEXC) + get_tx_error(apriv, index); + OUT4500( apriv, EVACK, status & (EV_TX | EV_TXEXC)); + /* Set up to be used again */ + apriv->fids[index] &= 0xffff; + if (index < MAX_FIDS / 2) { + if (!test_bit(FLAG_PENDING_XMIT, &apriv->flags)) + netif_wake_queue(dev); + } else { + if (!test_bit(FLAG_PENDING_XMIT11, &apriv->flags)) + netif_wake_queue(apriv->wifidev); + } + } else { + OUT4500( apriv, EVACK, status & (EV_TX | EV_TXCPY | EV_TXEXC)); + printk( KERN_ERR "airo: Unallocated FID was used to xmit\n" ); + } + } +exittx: + if ( status & ~STATUS_INTS & ~IGNORE_INTS ) + printk( KERN_WARNING "airo: Got weird status %x\n", + status & ~STATUS_INTS & ~IGNORE_INTS ); + } + + if (savedInterrupts) + OUT4500( apriv, EVINTEN, savedInterrupts ); + + /* done.. */ + return IRQ_RETVAL(handled); +} + +/* + * Routines to talk to the card + */ + +/* + * This was originally written for the 4500, hence the name + * NOTE: If use with 8bit mode and SMP bad things will happen! + * Why would some one do 8 bit IO in an SMP machine?!? + */ +static void OUT4500( struct airo_info *ai, u16 reg, u16 val ) { + if (test_bit(FLAG_MPI,&ai->flags)) + reg <<= 1; + if ( !do8bitIO ) + outw( val, ai->dev->base_addr + reg ); + else { + outb( val & 0xff, ai->dev->base_addr + reg ); + outb( val >> 8, ai->dev->base_addr + reg + 1 ); + } +} + +static u16 IN4500( struct airo_info *ai, u16 reg ) { + unsigned short rc; + + if (test_bit(FLAG_MPI,&ai->flags)) + reg <<= 1; + if ( !do8bitIO ) + rc = inw( ai->dev->base_addr + reg ); + else { + rc = inb( ai->dev->base_addr + reg ); + rc += ((int)inb( ai->dev->base_addr + reg + 1 )) << 8; + } + return rc; +} + +static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock ) { + int rc; + Cmd cmd; + + /* FLAG_RADIO_OFF : Radio disabled via /proc or Wireless Extensions + * FLAG_RADIO_DOWN : Radio disabled via "ifconfig ethX down" + * Note : we could try to use !netif_running(dev) in enable_MAC() + * instead of this flag, but I don't trust it *within* the + * open/close functions, and testing both flags together is + * "cheaper" - Jean II */ + if (ai->flags & FLAG_RADIO_MASK) return SUCCESS; + + if (lock && down_interruptible(&ai->sem)) + return -ERESTARTSYS; + + if (!test_bit(FLAG_ENABLED, &ai->flags)) { + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd = MAC_ENABLE; + rc = issuecommand(ai, &cmd, rsp); + if (rc == SUCCESS) + set_bit(FLAG_ENABLED, &ai->flags); + } else + rc = SUCCESS; + + if (lock) + up(&ai->sem); + + if (rc) + printk(KERN_ERR "%s: Cannot enable MAC, err=%d\n", + __FUNCTION__,rc); + return rc; +} + +static void disable_MAC( struct airo_info *ai, int lock ) { + Cmd cmd; + Resp rsp; + + if (lock && down_interruptible(&ai->sem)) + return; + + if (test_bit(FLAG_ENABLED, &ai->flags)) { + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd = MAC_DISABLE; // disable in case already enabled + issuecommand(ai, &cmd, &rsp); + clear_bit(FLAG_ENABLED, &ai->flags); + } + if (lock) + up(&ai->sem); +} + +static void enable_interrupts( struct airo_info *ai ) { + /* Enable the interrupts */ + OUT4500( ai, EVINTEN, STATUS_INTS ); +} + +static void disable_interrupts( struct airo_info *ai ) { + OUT4500( ai, EVINTEN, 0 ); +} + +static void mpi_receive_802_3(struct airo_info *ai) +{ + RxFid rxd; + int len = 0; + struct sk_buff *skb; + char *buffer; +#ifdef MICSUPPORT + int off = 0; + MICBuffer micbuf; +#endif + + memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd)); + /* Make sure we got something */ + if (rxd.rdy && rxd.valid == 0) { + len = rxd.len + 12; + if (len < 12 || len > 2048) + goto badrx; + + skb = dev_alloc_skb(len); + if (!skb) { + ai->stats.rx_dropped++; + goto badrx; + } + buffer = skb_put(skb,len); +#ifdef MICSUPPORT + memcpy(buffer, ai->rxfids[0].virtual_host_addr, ETH_ALEN * 2); + if (ai->micstats.enabled) { + memcpy(&micbuf, + ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2, + sizeof(micbuf)); + if (ntohs(micbuf.typelen) <= 0x05DC) { + if (len <= sizeof(micbuf) + ETH_ALEN * 2) + goto badmic; + + off = sizeof(micbuf); + skb_trim (skb, len - off); + } + } + memcpy(buffer + ETH_ALEN * 2, + ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2 + off, + len - ETH_ALEN * 2 - off); + if (decapsulate (ai, &micbuf, (etherHead*)buffer, len - off - ETH_ALEN * 2)) { +badmic: + dev_kfree_skb_irq (skb); + goto badrx; + } +#else + memcpy(buffer, ai->rxfids[0].virtual_host_addr, len); +#endif +#ifdef WIRELESS_SPY + if (ai->spy_data.spy_number > 0) { + char *sa; + struct iw_quality wstats; + /* Prepare spy data : addr + qual */ + sa = buffer + ETH_ALEN; + wstats.qual = 0; /* XXX Where do I get that info from ??? */ + wstats.level = 0; + wstats.updated = 0; + /* Update spy records */ + wireless_spy_update(ai->dev, sa, &wstats); + } +#endif /* WIRELESS_SPY */ + + skb->dev = ai->dev; + skb->ip_summed = CHECKSUM_NONE; + skb->protocol = eth_type_trans(skb, ai->dev); + skb->dev->last_rx = jiffies; + netif_rx(skb); + } +badrx: + if (rxd.valid == 0) { + rxd.valid = 1; + rxd.rdy = 0; + rxd.len = PKTSIZE; + memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd)); + } +} + +void mpi_receive_802_11 (struct airo_info *ai) +{ + RxFid rxd; + struct sk_buff *skb = NULL; + u16 fc, len, hdrlen = 0; +#pragma pack(1) + struct { + u16 status, len; + u8 rssi[2]; + u8 rate; + u8 freq; + u16 tmp[4]; + } hdr; +#pragma pack() + u16 gap; + u16 *buffer; + char *ptr = ai->rxfids[0].virtual_host_addr+4; + + memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd)); + memcpy ((char *)&hdr, ptr, sizeof(hdr)); + ptr += sizeof(hdr); + /* Bad CRC. Ignore packet */ + if (le16_to_cpu(hdr.status) & 2) + hdr.len = 0; + if (ai->wifidev == NULL) + hdr.len = 0; + len = le16_to_cpu(hdr.len); + if (len > 2312) { + printk( KERN_ERR "airo: Bad size %d\n", len ); + goto badrx; + } + if (len == 0) + goto badrx; + + memcpy ((char *)&fc, ptr, sizeof(fc)); + fc = le16_to_cpu(fc); + switch (fc & 0xc) { + case 4: + if ((fc & 0xe0) == 0xc0) + hdrlen = 10; + else + hdrlen = 16; + break; + case 8: + if ((fc&0x300)==0x300){ + hdrlen = 30; + break; + } + default: + hdrlen = 24; + } + + skb = dev_alloc_skb( len + hdrlen + 2 ); + if ( !skb ) { + ai->stats.rx_dropped++; + goto badrx; + } + buffer = (u16*)skb_put (skb, len + hdrlen); + memcpy ((char *)buffer, ptr, hdrlen); + ptr += hdrlen; + if (hdrlen == 24) + ptr += 6; + memcpy ((char *)&gap, ptr, sizeof(gap)); + ptr += sizeof(gap); + gap = le16_to_cpu(gap); + if (gap) { + if (gap <= 8) + ptr += gap; + else + printk(KERN_ERR + "airo: gaplen too big. Problems will follow...\n"); + } + memcpy ((char *)buffer + hdrlen, ptr, len); + ptr += len; +#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ + if (ai->spy_data.spy_number > 0) { + char *sa; + struct iw_quality wstats; + /* Prepare spy data : addr + qual */ + sa = (char*)buffer + 10; + wstats.qual = hdr.rssi[0]; + if (ai->rssi) + wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm; + else + wstats.level = (hdr.rssi[1] + 321) / 2; + wstats.updated = 3; + /* Update spy records */ + wireless_spy_update(ai->dev, sa, &wstats); + } +#endif /* IW_WIRELESS_SPY */ + skb->mac.raw = skb->data; + skb->pkt_type = PACKET_OTHERHOST; + skb->dev = ai->wifidev; + skb->protocol = htons(ETH_P_802_2); + skb->dev->last_rx = jiffies; + skb->ip_summed = CHECKSUM_NONE; + netif_rx( skb ); +badrx: + if (rxd.valid == 0) { + rxd.valid = 1; + rxd.rdy = 0; + rxd.len = PKTSIZE; + memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd)); + } +} + +static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) +{ + Cmd cmd; + Resp rsp; + int status; + int i; + SsidRid mySsid; + u16 lastindex; + WepKeyRid wkr; + int rc; + + memset( &mySsid, 0, sizeof( mySsid ) ); + if (ai->flash) { + kfree (ai->flash); + ai->flash = NULL; + } + + /* The NOP is the first step in getting the card going */ + cmd.cmd = NOP; + cmd.parm0 = cmd.parm1 = cmd.parm2 = 0; + if (lock && down_interruptible(&ai->sem)) + return ERROR; + if ( issuecommand( ai, &cmd, &rsp ) != SUCCESS ) { + if (lock) + up(&ai->sem); + return ERROR; + } + disable_MAC( ai, 0); + + // Let's figure out if we need to use the AUX port + if (!test_bit(FLAG_MPI,&ai->flags)) { + cmd.cmd = CMD_ENABLEAUX; + if (issuecommand(ai, &cmd, &rsp) != SUCCESS) { + if (lock) + up(&ai->sem); + printk(KERN_ERR "airo: Error checking for AUX port\n"); + return ERROR; + } + if (!aux_bap || rsp.status & 0xff00) { + ai->bap_read = fast_bap_read; + printk(KERN_DEBUG "airo: Doing fast bap_reads\n"); + } else { + ai->bap_read = aux_bap_read; + printk(KERN_DEBUG "airo: Doing AUX bap_reads\n"); + } + } + if (lock) + up(&ai->sem); + if (ai->config.len == 0) { + tdsRssiRid rssi_rid; + CapabilityRid cap_rid; + + if (ai->APList) { + kfree(ai->APList); + ai->APList = NULL; + } + if (ai->SSID) { + kfree(ai->SSID); + ai->SSID = NULL; + } + // general configuration (read/modify/write) + status = readConfigRid(ai, lock); + if ( status != SUCCESS ) return ERROR; + + status = readCapabilityRid(ai, &cap_rid, lock); + if ( status != SUCCESS ) return ERROR; + + status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock); + if ( status == SUCCESS ) { + if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL) + memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); + } + else { + if (ai->rssi) { + kfree(ai->rssi); + ai->rssi = NULL; + } + if (cap_rid.softCap & 8) + ai->config.rmode |= RXMODE_NORMALIZED_RSSI; + else + printk(KERN_WARNING "airo: unknown received signal level scale\n"); + } + ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS; + ai->config.authType = AUTH_OPEN; + ai->config.modulation = MOD_CCK; + +#ifdef MICSUPPORT + if ((cap_rid.len>=sizeof(cap_rid)) && (cap_rid.extSoftCap&1) && + (micsetup(ai) == SUCCESS)) { + ai->config.opmode |= MODE_MIC; + set_bit(FLAG_MIC_CAPABLE, &ai->flags); + } +#endif + + /* Save off the MAC */ + for( i = 0; i < ETH_ALEN; i++ ) { + mac[i] = ai->config.macAddr[i]; + } + + /* Check to see if there are any insmod configured + rates to add */ + if ( rates[0] ) { + int i = 0; + memset(ai->config.rates,0,sizeof(ai->config.rates)); + for( i = 0; i < 8 && rates[i]; i++ ) { + ai->config.rates[i] = rates[i]; + } + } + if ( basic_rate > 0 ) { + int i; + for( i = 0; i < 8; i++ ) { + if ( ai->config.rates[i] == basic_rate || + !ai->config.rates ) { + ai->config.rates[i] = basic_rate | 0x80; + break; + } + } + } + set_bit (FLAG_COMMIT, &ai->flags); + } + + /* Setup the SSIDs if present */ + if ( ssids[0] ) { + int i; + for( i = 0; i < 3 && ssids[i]; i++ ) { + mySsid.ssids[i].len = strlen(ssids[i]); + if ( mySsid.ssids[i].len > 32 ) + mySsid.ssids[i].len = 32; + memcpy(mySsid.ssids[i].ssid, ssids[i], + mySsid.ssids[i].len); + } + mySsid.len = sizeof(mySsid); + } + + status = writeConfigRid(ai, lock); + if ( status != SUCCESS ) return ERROR; + + /* Set up the SSID list */ + if ( ssids[0] ) { + status = writeSsidRid(ai, &mySsid, lock); + if ( status != SUCCESS ) return ERROR; + } + + status = enable_MAC(ai, &rsp, lock); + if ( status != SUCCESS || (rsp.status & 0xFF00) != 0) { + printk( KERN_ERR "airo: Bad MAC enable reason = %x, rid = %x, offset = %d\n", rsp.rsp0, rsp.rsp1, rsp.rsp2 ); + return ERROR; + } + + /* Grab the initial wep key, we gotta save it for auto_wep */ + rc = readWepKeyRid(ai, &wkr, 1, lock); + if (rc == SUCCESS) do { + lastindex = wkr.kindex; + if (wkr.kindex == 0xffff) { + ai->defindex = wkr.mac[0]; + } + rc = readWepKeyRid(ai, &wkr, 0, lock); + } while(lastindex != wkr.kindex); + + if (auto_wep) { + ai->expires = RUN_AT(3*HZ); + wake_up_interruptible(&ai->thr_wait); + } + + return SUCCESS; +} + +static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) { + // Im really paranoid about letting it run forever! + int max_tries = 600000; + + if (IN4500(ai, EVSTAT) & EV_CMD) + OUT4500(ai, EVACK, EV_CMD); + + OUT4500(ai, PARAM0, pCmd->parm0); + OUT4500(ai, PARAM1, pCmd->parm1); + OUT4500(ai, PARAM2, pCmd->parm2); + OUT4500(ai, COMMAND, pCmd->cmd); + + while (max_tries-- && (IN4500(ai, EVSTAT) & EV_CMD) == 0) { + if ((IN4500(ai, COMMAND)) == pCmd->cmd) + // PC4500 didn't notice command, try again + OUT4500(ai, COMMAND, pCmd->cmd); + if (!in_atomic() && (max_tries & 255) == 0) + schedule(); + } + + if ( max_tries == -1 ) { + printk( KERN_ERR + "airo: Max tries exceeded when issueing command\n" ); + if (IN4500(ai, COMMAND) & COMMAND_BUSY) + OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); + return ERROR; + } + + // command completed + pRsp->status = IN4500(ai, STATUS); + pRsp->rsp0 = IN4500(ai, RESP0); + pRsp->rsp1 = IN4500(ai, RESP1); + pRsp->rsp2 = IN4500(ai, RESP2); + if ((pRsp->status & 0xff00)!=0 && pCmd->cmd != CMD_SOFTRESET) { + printk (KERN_ERR "airo: cmd= %x\n", pCmd->cmd); + printk (KERN_ERR "airo: status= %x\n", pRsp->status); + printk (KERN_ERR "airo: Rsp0= %x\n", pRsp->rsp0); + printk (KERN_ERR "airo: Rsp1= %x\n", pRsp->rsp1); + printk (KERN_ERR "airo: Rsp2= %x\n", pRsp->rsp2); + } + + // clear stuck command busy if necessary + if (IN4500(ai, COMMAND) & COMMAND_BUSY) { + OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); + } + // acknowledge processing the status/response + OUT4500(ai, EVACK, EV_CMD); + + return SUCCESS; +} + +/* Sets up the bap to start exchange data. whichbap should + * be one of the BAP0 or BAP1 defines. Locks should be held before + * calling! */ +static int bap_setup(struct airo_info *ai, u16 rid, u16 offset, int whichbap ) +{ + int timeout = 50; + int max_tries = 3; + + OUT4500(ai, SELECT0+whichbap, rid); + OUT4500(ai, OFFSET0+whichbap, offset); + while (1) { + int status = IN4500(ai, OFFSET0+whichbap); + if (status & BAP_BUSY) { + /* This isn't really a timeout, but its kinda + close */ + if (timeout--) { + continue; + } + } else if ( status & BAP_ERR ) { + /* invalid rid or offset */ + printk( KERN_ERR "airo: BAP error %x %d\n", + status, whichbap ); + return ERROR; + } else if (status & BAP_DONE) { // success + return SUCCESS; + } + if ( !(max_tries--) ) { + printk( KERN_ERR + "airo: BAP setup error too many retries\n" ); + return ERROR; + } + // -- PC4500 missed it, try again + OUT4500(ai, SELECT0+whichbap, rid); + OUT4500(ai, OFFSET0+whichbap, offset); + timeout = 50; + } +} + +/* should only be called by aux_bap_read. This aux function and the + following use concepts not documented in the developers guide. I + got them from a patch given to my by Aironet */ +static u16 aux_setup(struct airo_info *ai, u16 page, + u16 offset, u16 *len) +{ + u16 next; + + OUT4500(ai, AUXPAGE, page); + OUT4500(ai, AUXOFF, 0); + next = IN4500(ai, AUXDATA); + *len = IN4500(ai, AUXDATA)&0xff; + if (offset != 4) OUT4500(ai, AUXOFF, offset); + return next; +} + +/* requires call to bap_setup() first */ +static int aux_bap_read(struct airo_info *ai, u16 *pu16Dst, + int bytelen, int whichbap) +{ + u16 len; + u16 page; + u16 offset; + u16 next; + int words; + int i; + unsigned long flags; + + spin_lock_irqsave(&ai->aux_lock, flags); + page = IN4500(ai, SWS0+whichbap); + offset = IN4500(ai, SWS2+whichbap); + next = aux_setup(ai, page, offset, &len); + words = (bytelen+1)>>1; + + for (i=0; i<words;) { + int count; + count = (len>>1) < (words-i) ? (len>>1) : (words-i); + if ( !do8bitIO ) + insw( ai->dev->base_addr+DATA0+whichbap, + pu16Dst+i,count ); + else + insb( ai->dev->base_addr+DATA0+whichbap, + pu16Dst+i, count << 1 ); + i += count; + if (i<words) { + next = aux_setup(ai, next, 4, &len); + } + } + spin_unlock_irqrestore(&ai->aux_lock, flags); + return SUCCESS; +} + + +/* requires call to bap_setup() first */ +static int fast_bap_read(struct airo_info *ai, u16 *pu16Dst, + int bytelen, int whichbap) +{ + bytelen = (bytelen + 1) & (~1); // round up to even value + if ( !do8bitIO ) + insw( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen>>1 ); + else + insb( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen ); + return SUCCESS; +} + +/* requires call to bap_setup() first */ +static int bap_write(struct airo_info *ai, const u16 *pu16Src, + int bytelen, int whichbap) +{ + bytelen = (bytelen + 1) & (~1); // round up to even value + if ( !do8bitIO ) + outsw( ai->dev->base_addr+DATA0+whichbap, + pu16Src, bytelen>>1 ); + else + outsb( ai->dev->base_addr+DATA0+whichbap, pu16Src, bytelen ); + return SUCCESS; +} + +static int PC4500_accessrid(struct airo_info *ai, u16 rid, u16 accmd) +{ + Cmd cmd; /* for issuing commands */ + Resp rsp; /* response from commands */ + u16 status; + + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd = accmd; + cmd.parm0 = rid; + status = issuecommand(ai, &cmd, &rsp); + if (status != 0) return status; + if ( (rsp.status & 0x7F00) != 0) { + return (accmd << 8) + (rsp.rsp0 & 0xFF); + } + return 0; +} + +/* Note, that we are using BAP1 which is also used by transmit, so + * we must get a lock. */ +static int PC4500_readrid(struct airo_info *ai, u16 rid, void *pBuf, int len, int lock) +{ + u16 status; + int rc = SUCCESS; + + if (lock) { + if (down_interruptible(&ai->sem)) + return ERROR; + } + if (test_bit(FLAG_MPI,&ai->flags)) { + Cmd cmd; + Resp rsp; + + memset(&cmd, 0, sizeof(cmd)); + memset(&rsp, 0, sizeof(rsp)); + ai->config_desc.rid_desc.valid = 1; + ai->config_desc.rid_desc.len = RIDSIZE; + ai->config_desc.rid_desc.rid = 0; + ai->config_desc.rid_desc.host_addr = ai->ridbus; + + cmd.cmd = CMD_ACCESS; + cmd.parm0 = rid; + + memcpy_toio(ai->config_desc.card_ram_off, + &ai->config_desc.rid_desc, sizeof(Rid)); + + rc = issuecommand(ai, &cmd, &rsp); + + if (rsp.status & 0x7f00) + rc = rsp.rsp0; + if (!rc) + memcpy(pBuf, ai->config_desc.virtual_host_addr, len); + goto done; + } else { + if ((status = PC4500_accessrid(ai, rid, CMD_ACCESS))!=SUCCESS) { + rc = status; + goto done; + } + if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) { + rc = ERROR; + goto done; + } + // read the rid length field + bap_read(ai, pBuf, 2, BAP1); + // length for remaining part of rid + len = min(len, (int)le16_to_cpu(*(u16*)pBuf)) - 2; + + if ( len <= 2 ) { + printk( KERN_ERR + "airo: Rid %x has a length of %d which is too short\n", + (int)rid, (int)len ); + rc = ERROR; + goto done; + } + // read remainder of the rid + rc = bap_read(ai, ((u16*)pBuf)+1, len, BAP1); + } +done: + if (lock) + up(&ai->sem); + return rc; +} + +/* Note, that we are using BAP1 which is also used by transmit, so + * make sure this isnt called when a transmit is happening */ +static int PC4500_writerid(struct airo_info *ai, u16 rid, + const void *pBuf, int len, int lock) +{ + u16 status; + int rc = SUCCESS; + + *(u16*)pBuf = cpu_to_le16((u16)len); + + if (lock) { + if (down_interruptible(&ai->sem)) + return ERROR; + } + if (test_bit(FLAG_MPI,&ai->flags)) { + Cmd cmd; + Resp rsp; + + if (test_bit(FLAG_ENABLED, &ai->flags)) + printk(KERN_ERR + "%s: MAC should be disabled (rid=%04x)\n", + __FUNCTION__, rid); + memset(&cmd, 0, sizeof(cmd)); + memset(&rsp, 0, sizeof(rsp)); + + ai->config_desc.rid_desc.valid = 1; + ai->config_desc.rid_desc.len = *((u16 *)pBuf); + ai->config_desc.rid_desc.rid = 0; + + cmd.cmd = CMD_WRITERID; + cmd.parm0 = rid; + + memcpy_toio(ai->config_desc.card_ram_off, + &ai->config_desc.rid_desc, sizeof(Rid)); + + if (len < 4 || len > 2047) { + printk(KERN_ERR "%s: len=%d\n",__FUNCTION__,len); + rc = -1; + } else { + memcpy((char *)ai->config_desc.virtual_host_addr, + pBuf, len); + + rc = issuecommand(ai, &cmd, &rsp); + if ((rc & 0xff00) != 0) { + printk(KERN_ERR "%s: Write rid Error %d\n", + __FUNCTION__,rc); + printk(KERN_ERR "%s: Cmd=%04x\n", + __FUNCTION__,cmd.cmd); + } + + if ((rsp.status & 0x7f00)) + rc = rsp.rsp0; + } + } else { + // --- first access so that we can write the rid data + if ( (status = PC4500_accessrid(ai, rid, CMD_ACCESS)) != 0) { + rc = status; + goto done; + } + // --- now write the rid data + if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) { + rc = ERROR; + goto done; + } + bap_write(ai, pBuf, len, BAP1); + // ---now commit the rid data + rc = PC4500_accessrid(ai, rid, 0x100|CMD_ACCESS); + } +done: + if (lock) + up(&ai->sem); + return rc; +} + +/* Allocates a FID to be used for transmitting packets. We only use + one for now. */ +static u16 transmit_allocate(struct airo_info *ai, int lenPayload, int raw) +{ + unsigned int loop = 3000; + Cmd cmd; + Resp rsp; + u16 txFid; + u16 txControl; + + cmd.cmd = CMD_ALLOCATETX; + cmd.parm0 = lenPayload; + if (down_interruptible(&ai->sem)) + return ERROR; + if (issuecommand(ai, &cmd, &rsp) != SUCCESS) { + txFid = ERROR; + goto done; + } + if ( (rsp.status & 0xFF00) != 0) { + txFid = ERROR; + goto done; + } + /* wait for the allocate event/indication + * It makes me kind of nervous that this can just sit here and spin, + * but in practice it only loops like four times. */ + while (((IN4500(ai, EVSTAT) & EV_ALLOC) == 0) && --loop); + if (!loop) { + txFid = ERROR; + goto done; + } + + // get the allocated fid and acknowledge + txFid = IN4500(ai, TXALLOCFID); + OUT4500(ai, EVACK, EV_ALLOC); + + /* The CARD is pretty cool since it converts the ethernet packet + * into 802.11. Also note that we don't release the FID since we + * will be using the same one over and over again. */ + /* We only have to setup the control once since we are not + * releasing the fid. */ + if (raw) + txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_11 + | TXCTL_ETHERNET | TXCTL_NORELEASE); + else + txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_3 + | TXCTL_ETHERNET | TXCTL_NORELEASE); + if (bap_setup(ai, txFid, 0x0008, BAP1) != SUCCESS) + txFid = ERROR; + else + bap_write(ai, &txControl, sizeof(txControl), BAP1); + +done: + up(&ai->sem); + + return txFid; +} + +/* In general BAP1 is dedicated to transmiting packets. However, + since we need a BAP when accessing RIDs, we also use BAP1 for that. + Make sure the BAP1 spinlock is held when this is called. */ +static int transmit_802_3_packet(struct airo_info *ai, int len, char *pPacket) +{ + u16 payloadLen; + Cmd cmd; + Resp rsp; + int miclen = 0; + u16 txFid = len; + MICBuffer pMic; + + len >>= 16; + + if (len <= ETH_ALEN * 2) { + printk( KERN_WARNING "Short packet %d\n", len ); + return ERROR; + } + len -= ETH_ALEN * 2; + +#ifdef MICSUPPORT + if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled && + (ntohs(((u16 *)pPacket)[6]) != 0x888E)) { + if (encapsulate(ai,(etherHead *)pPacket,&pMic,len) != SUCCESS) + return ERROR; + miclen = sizeof(pMic); + } +#endif + + // packet is destination[6], source[6], payload[len-12] + // write the payload length and dst/src/payload + if (bap_setup(ai, txFid, 0x0036, BAP1) != SUCCESS) return ERROR; + /* The hardware addresses aren't counted as part of the payload, so + * we have to subtract the 12 bytes for the addresses off */ + payloadLen = cpu_to_le16(len + miclen); + bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1); + bap_write(ai, (const u16*)pPacket, sizeof(etherHead), BAP1); + if (miclen) + bap_write(ai, (const u16*)&pMic, miclen, BAP1); + bap_write(ai, (const u16*)(pPacket + sizeof(etherHead)), len, BAP1); + // issue the transmit command + memset( &cmd, 0, sizeof( cmd ) ); + cmd.cmd = CMD_TRANSMIT; + cmd.parm0 = txFid; + if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR; + if ( (rsp.status & 0xFF00) != 0) return ERROR; + return SUCCESS; +} + +static int transmit_802_11_packet(struct airo_info *ai, int len, char *pPacket) +{ + u16 fc, payloadLen; + Cmd cmd; + Resp rsp; + int hdrlen; + struct { + u8 addr4[ETH_ALEN]; + u16 gaplen; + u8 gap[6]; + } gap; + u16 txFid = len; + len >>= 16; + gap.gaplen = 6; + + fc = le16_to_cpu(*(const u16*)pPacket); + switch (fc & 0xc) { + case 4: + if ((fc & 0xe0) == 0xc0) + hdrlen = 10; + else + hdrlen = 16; + break; + case 8: + if ((fc&0x300)==0x300){ + hdrlen = 30; + break; + } + default: + hdrlen = 24; + } + + if (len < hdrlen) { + printk( KERN_WARNING "Short packet %d\n", len ); + return ERROR; + } + + /* packet is 802.11 header + payload + * write the payload length and dst/src/payload */ + if (bap_setup(ai, txFid, 6, BAP1) != SUCCESS) return ERROR; + /* The 802.11 header aren't counted as part of the payload, so + * we have to subtract the header bytes off */ + payloadLen = cpu_to_le16(len-hdrlen); + bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1); + if (bap_setup(ai, txFid, 0x0014, BAP1) != SUCCESS) return ERROR; + bap_write(ai, (const u16*)pPacket, hdrlen, BAP1); + bap_write(ai, hdrlen == 30 ? + (const u16*)&gap.gaplen : (const u16*)&gap, 38 - hdrlen, BAP1); + + bap_write(ai, (const u16*)(pPacket + hdrlen), len - hdrlen, BAP1); + // issue the transmit command + memset( &cmd, 0, sizeof( cmd ) ); + cmd.cmd = CMD_TRANSMIT; + cmd.parm0 = txFid; + if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR; + if ( (rsp.status & 0xFF00) != 0) return ERROR; + return SUCCESS; +} + +/* + * This is the proc_fs routines. It is a bit messier than I would + * like! Feel free to clean it up! + */ + +static ssize_t proc_read( struct file *file, + char __user *buffer, + size_t len, + loff_t *offset); + +static ssize_t proc_write( struct file *file, + const char __user *buffer, + size_t len, + loff_t *offset ); +static int proc_close( struct inode *inode, struct file *file ); + +static int proc_stats_open( struct inode *inode, struct file *file ); +static int proc_statsdelta_open( struct inode *inode, struct file *file ); +static int proc_status_open( struct inode *inode, struct file *file ); +static int proc_SSID_open( struct inode *inode, struct file *file ); +static int proc_APList_open( struct inode *inode, struct file *file ); +static int proc_BSSList_open( struct inode *inode, struct file *file ); +static int proc_config_open( struct inode *inode, struct file *file ); +static int proc_wepkey_open( struct inode *inode, struct file *file ); + +static struct file_operations proc_statsdelta_ops = { + .read = proc_read, + .open = proc_statsdelta_open, + .release = proc_close +}; + +static struct file_operations proc_stats_ops = { + .read = proc_read, + .open = proc_stats_open, + .release = proc_close +}; + +static struct file_operations proc_status_ops = { + .read = proc_read, + .open = proc_status_open, + .release = proc_close +}; + +static struct file_operations proc_SSID_ops = { + .read = proc_read, + .write = proc_write, + .open = proc_SSID_open, + .release = proc_close +}; + +static struct file_operations proc_BSSList_ops = { + .read = proc_read, + .write = proc_write, + .open = proc_BSSList_open, + .release = proc_close +}; + +static struct file_operations proc_APList_ops = { + .read = proc_read, + .write = proc_write, + .open = proc_APList_open, + .release = proc_close +}; + +static struct file_operations proc_config_ops = { + .read = proc_read, + .write = proc_write, + .open = proc_config_open, + .release = proc_close +}; + +static struct file_operations proc_wepkey_ops = { + .read = proc_read, + .write = proc_write, + .open = proc_wepkey_open, + .release = proc_close +}; + +static struct proc_dir_entry *airo_entry; + +struct proc_data { + int release_buffer; + int readlen; + char *rbuffer; + int writelen; + int maxwritelen; + char *wbuffer; + void (*on_close) (struct inode *, struct file *); +}; + +#ifndef SETPROC_OPS +#define SETPROC_OPS(entry, ops) (entry)->proc_fops = &(ops) +#endif + +static int setup_proc_entry( struct net_device *dev, + struct airo_info *apriv ) { + struct proc_dir_entry *entry; + /* First setup the device directory */ + strcpy(apriv->proc_name,dev->name); + apriv->proc_entry = create_proc_entry(apriv->proc_name, + S_IFDIR|airo_perm, + airo_entry); + apriv->proc_entry->uid = proc_uid; + apriv->proc_entry->gid = proc_gid; + apriv->proc_entry->owner = THIS_MODULE; + + /* Setup the StatsDelta */ + entry = create_proc_entry("StatsDelta", + S_IFREG | (S_IRUGO&proc_perm), + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_statsdelta_ops); + + /* Setup the Stats */ + entry = create_proc_entry("Stats", + S_IFREG | (S_IRUGO&proc_perm), + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_stats_ops); + + /* Setup the Status */ + entry = create_proc_entry("Status", + S_IFREG | (S_IRUGO&proc_perm), + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_status_ops); + + /* Setup the Config */ + entry = create_proc_entry("Config", + S_IFREG | proc_perm, + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_config_ops); + + /* Setup the SSID */ + entry = create_proc_entry("SSID", + S_IFREG | proc_perm, + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_SSID_ops); + + /* Setup the APList */ + entry = create_proc_entry("APList", + S_IFREG | proc_perm, + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_APList_ops); + + /* Setup the BSSList */ + entry = create_proc_entry("BSSList", + S_IFREG | proc_perm, + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_BSSList_ops); + + /* Setup the WepKey */ + entry = create_proc_entry("WepKey", + S_IFREG | proc_perm, + apriv->proc_entry); + entry->uid = proc_uid; + entry->gid = proc_gid; + entry->data = dev; + entry->owner = THIS_MODULE; + SETPROC_OPS(entry, proc_wepkey_ops); + + return 0; +} + +static int takedown_proc_entry( struct net_device *dev, + struct airo_info *apriv ) { + if ( !apriv->proc_entry->namelen ) return 0; + remove_proc_entry("Stats",apriv->proc_entry); + remove_proc_entry("StatsDelta",apriv->proc_entry); + remove_proc_entry("Status",apriv->proc_entry); + remove_proc_entry("Config",apriv->proc_entry); + remove_proc_entry("SSID",apriv->proc_entry); + remove_proc_entry("APList",apriv->proc_entry); + remove_proc_entry("BSSList",apriv->proc_entry); + remove_proc_entry("WepKey",apriv->proc_entry); + remove_proc_entry(apriv->proc_name,airo_entry); + return 0; +} + +/* + * What we want from the proc_fs is to be able to efficiently read + * and write the configuration. To do this, we want to read the + * configuration when the file is opened and write it when the file is + * closed. So basically we allocate a read buffer at open and fill it + * with data, and allocate a write buffer and read it at close. + */ + +/* + * The read routine is generic, it relies on the preallocated rbuffer + * to supply the data. + */ +static ssize_t proc_read( struct file *file, + char __user *buffer, + size_t len, + loff_t *offset ) +{ + loff_t pos = *offset; + struct proc_data *priv = (struct proc_data*)file->private_data; + + if (!priv->rbuffer) + return -EINVAL; + + if (pos < 0) + return -EINVAL; + if (pos >= priv->readlen) + return 0; + if (len > priv->readlen - pos) + len = priv->readlen - pos; + if (copy_to_user(buffer, priv->rbuffer + pos, len)) + return -EFAULT; + *offset = pos + len; + return len; +} + +/* + * The write routine is generic, it fills in a preallocated rbuffer + * to supply the data. + */ +static ssize_t proc_write( struct file *file, + const char __user *buffer, + size_t len, + loff_t *offset ) +{ + loff_t pos = *offset; + struct proc_data *priv = (struct proc_data*)file->private_data; + + if (!priv->wbuffer) + return -EINVAL; + + if (pos < 0) + return -EINVAL; + if (pos >= priv->maxwritelen) + return 0; + if (len > priv->maxwritelen - pos) + len = priv->maxwritelen - pos; + if (copy_from_user(priv->wbuffer + pos, buffer, len)) + return -EFAULT; + if ( pos + len > priv->writelen ) + priv->writelen = len + file->f_pos; + *offset = pos + len; + return len; +} + +static int proc_status_open( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *apriv = dev->priv; + CapabilityRid cap_rid; + StatusRid status_rid; + int i; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + + readStatusRid(apriv, &status_rid, 1); + readCapabilityRid(apriv, &cap_rid, 1); + + i = sprintf(data->rbuffer, "Status: %s%s%s%s%s%s%s%s%s\n", + status_rid.mode & 1 ? "CFG ": "", + status_rid.mode & 2 ? "ACT ": "", + status_rid.mode & 0x10 ? "SYN ": "", + status_rid.mode & 0x20 ? "LNK ": "", + status_rid.mode & 0x40 ? "LEAP ": "", + status_rid.mode & 0x80 ? "PRIV ": "", + status_rid.mode & 0x100 ? "KEY ": "", + status_rid.mode & 0x200 ? "WEP ": "", + status_rid.mode & 0x8000 ? "ERR ": ""); + sprintf( data->rbuffer+i, "Mode: %x\n" + "Signal Strength: %d\n" + "Signal Quality: %d\n" + "SSID: %-.*s\n" + "AP: %-.16s\n" + "Freq: %d\n" + "BitRate: %dmbs\n" + "Driver Version: %s\n" + "Device: %s\nManufacturer: %s\nFirmware Version: %s\n" + "Radio type: %x\nCountry: %x\nHardware Version: %x\n" + "Software Version: %x\nSoftware Subversion: %x\n" + "Boot block version: %x\n", + (int)status_rid.mode, + (int)status_rid.normalizedSignalStrength, + (int)status_rid.signalQuality, + (int)status_rid.SSIDlen, + status_rid.SSID, + status_rid.apName, + (int)status_rid.channel, + (int)status_rid.currentXmitRate/2, + version, + cap_rid.prodName, + cap_rid.manName, + cap_rid.prodVer, + cap_rid.radioType, + cap_rid.country, + cap_rid.hardVer, + (int)cap_rid.softVer, + (int)cap_rid.softSubVer, + (int)cap_rid.bootBlockVer ); + data->readlen = strlen( data->rbuffer ); + return 0; +} + +static int proc_stats_rid_open(struct inode*, struct file*, u16); +static int proc_statsdelta_open( struct inode *inode, + struct file *file ) { + if (file->f_mode&FMODE_WRITE) { + return proc_stats_rid_open(inode, file, RID_STATSDELTACLEAR); + } + return proc_stats_rid_open(inode, file, RID_STATSDELTA); +} + +static int proc_stats_open( struct inode *inode, struct file *file ) { + return proc_stats_rid_open(inode, file, RID_STATS); +} + +static int proc_stats_rid_open( struct inode *inode, + struct file *file, + u16 rid ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *apriv = dev->priv; + StatsRid stats; + int i, j; + u32 *vals = stats.vals; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 4096, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + + readStatsRid(apriv, &stats, rid, 1); + + j = 0; + for(i=0; statsLabels[i]!=(char *)-1 && + i*4<stats.len; i++){ + if (!statsLabels[i]) continue; + if (j+strlen(statsLabels[i])+16>4096) { + printk(KERN_WARNING + "airo: Potentially disasterous buffer overflow averted!\n"); + break; + } + j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i], vals[i]); + } + if (i*4>=stats.len){ + printk(KERN_WARNING + "airo: Got a short rid\n"); + } + data->readlen = j; + return 0; +} + +static int get_dec_u16( char *buffer, int *start, int limit ) { + u16 value; + int valid = 0; + for( value = 0; buffer[*start] >= '0' && + buffer[*start] <= '9' && + *start < limit; (*start)++ ) { + valid = 1; + value *= 10; + value += buffer[*start] - '0'; + } + if ( !valid ) return -1; + return value; +} + +static int airo_config_commit(struct net_device *dev, + struct iw_request_info *info, void *zwrq, + char *extra); + +static void proc_config_on_close( struct inode *inode, struct file *file ) { + struct proc_data *data = file->private_data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + char *line; + + if ( !data->writelen ) return; + + readConfigRid(ai, 1); + set_bit (FLAG_COMMIT, &ai->flags); + + line = data->wbuffer; + while( line[0] ) { +/*** Mode processing */ + if ( !strncmp( line, "Mode: ", 6 ) ) { + line += 6; + if ((ai->config.rmode & 0xff) >= RXMODE_RFMON) + set_bit (FLAG_RESET, &ai->flags); + ai->config.rmode &= 0xfe00; + clear_bit (FLAG_802_11, &ai->flags); + ai->config.opmode &= 0xFF00; + ai->config.scanMode = SCANMODE_ACTIVE; + if ( line[0] == 'a' ) { + ai->config.opmode |= 0; + } else { + ai->config.opmode |= 1; + if ( line[0] == 'r' ) { + ai->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER; + ai->config.scanMode = SCANMODE_PASSIVE; + set_bit (FLAG_802_11, &ai->flags); + } else if ( line[0] == 'y' ) { + ai->config.rmode |= RXMODE_RFMON_ANYBSS | RXMODE_DISABLE_802_3_HEADER; + ai->config.scanMode = SCANMODE_PASSIVE; + set_bit (FLAG_802_11, &ai->flags); + } else if ( line[0] == 'l' ) + ai->config.rmode |= RXMODE_LANMON; + } + set_bit (FLAG_COMMIT, &ai->flags); + } + +/*** Radio status */ + else if (!strncmp(line,"Radio: ", 7)) { + line += 7; + if (!strncmp(line,"off",3)) { + set_bit (FLAG_RADIO_OFF, &ai->flags); + } else { + clear_bit (FLAG_RADIO_OFF, &ai->flags); + } + } +/*** NodeName processing */ + else if ( !strncmp( line, "NodeName: ", 10 ) ) { + int j; + + line += 10; + memset( ai->config.nodeName, 0, 16 ); +/* Do the name, assume a space between the mode and node name */ + for( j = 0; j < 16 && line[j] != '\n'; j++ ) { + ai->config.nodeName[j] = line[j]; + } + set_bit (FLAG_COMMIT, &ai->flags); + } + +/*** PowerMode processing */ + else if ( !strncmp( line, "PowerMode: ", 11 ) ) { + line += 11; + if ( !strncmp( line, "PSPCAM", 6 ) ) { + ai->config.powerSaveMode = POWERSAVE_PSPCAM; + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "PSP", 3 ) ) { + ai->config.powerSaveMode = POWERSAVE_PSP; + set_bit (FLAG_COMMIT, &ai->flags); + } else { + ai->config.powerSaveMode = POWERSAVE_CAM; + set_bit (FLAG_COMMIT, &ai->flags); + } + } else if ( !strncmp( line, "DataRates: ", 11 ) ) { + int v, i = 0, k = 0; /* i is index into line, + k is index to rates */ + + line += 11; + while((v = get_dec_u16(line, &i, 3))!=-1) { + ai->config.rates[k++] = (u8)v; + line += i + 1; + i = 0; + } + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "Channel: ", 9 ) ) { + int v, i = 0; + line += 9; + v = get_dec_u16(line, &i, i+3); + if ( v != -1 ) { + ai->config.channelSet = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } + } else if ( !strncmp( line, "XmitPower: ", 11 ) ) { + int v, i = 0; + line += 11; + v = get_dec_u16(line, &i, i+3); + if ( v != -1 ) { + ai->config.txPower = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } + } else if ( !strncmp( line, "WEP: ", 5 ) ) { + line += 5; + switch( line[0] ) { + case 's': + ai->config.authType = (u16)AUTH_SHAREDKEY; + break; + case 'e': + ai->config.authType = (u16)AUTH_ENCRYPT; + break; + default: + ai->config.authType = (u16)AUTH_OPEN; + break; + } + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "LongRetryLimit: ", 16 ) ) { + int v, i = 0; + + line += 16; + v = get_dec_u16(line, &i, 3); + v = (v<0) ? 0 : ((v>255) ? 255 : v); + ai->config.longRetryLimit = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "ShortRetryLimit: ", 17 ) ) { + int v, i = 0; + + line += 17; + v = get_dec_u16(line, &i, 3); + v = (v<0) ? 0 : ((v>255) ? 255 : v); + ai->config.shortRetryLimit = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "RTSThreshold: ", 14 ) ) { + int v, i = 0; + + line += 14; + v = get_dec_u16(line, &i, 4); + v = (v<0) ? 0 : ((v>2312) ? 2312 : v); + ai->config.rtsThres = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "TXMSDULifetime: ", 16 ) ) { + int v, i = 0; + + line += 16; + v = get_dec_u16(line, &i, 5); + v = (v<0) ? 0 : v; + ai->config.txLifetime = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "RXMSDULifetime: ", 16 ) ) { + int v, i = 0; + + line += 16; + v = get_dec_u16(line, &i, 5); + v = (v<0) ? 0 : v; + ai->config.rxLifetime = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "TXDiversity: ", 13 ) ) { + ai->config.txDiversity = + (line[13]=='l') ? 1 : + ((line[13]=='r')? 2: 3); + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "RXDiversity: ", 13 ) ) { + ai->config.rxDiversity = + (line[13]=='l') ? 1 : + ((line[13]=='r')? 2: 3); + set_bit (FLAG_COMMIT, &ai->flags); + } else if ( !strncmp( line, "FragThreshold: ", 15 ) ) { + int v, i = 0; + + line += 15; + v = get_dec_u16(line, &i, 4); + v = (v<256) ? 256 : ((v>2312) ? 2312 : v); + v = v & 0xfffe; /* Make sure its even */ + ai->config.fragThresh = (u16)v; + set_bit (FLAG_COMMIT, &ai->flags); + } else if (!strncmp(line, "Modulation: ", 12)) { + line += 12; + switch(*line) { + case 'd': ai->config.modulation=MOD_DEFAULT; set_bit(FLAG_COMMIT, &ai->flags); break; + case 'c': ai->config.modulation=MOD_CCK; set_bit(FLAG_COMMIT, &ai->flags); break; + case 'm': ai->config.modulation=MOD_MOK; set_bit(FLAG_COMMIT, &ai->flags); break; + default: + printk( KERN_WARNING "airo: Unknown modulation\n" ); + } + } else if (!strncmp(line, "Preamble: ", 10)) { + line += 10; + switch(*line) { + case 'a': ai->config.preamble=PREAMBLE_AUTO; set_bit(FLAG_COMMIT, &ai->flags); break; + case 'l': ai->config.preamble=PREAMBLE_LONG; set_bit(FLAG_COMMIT, &ai->flags); break; + case 's': ai->config.preamble=PREAMBLE_SHORT; set_bit(FLAG_COMMIT, &ai->flags); break; + default: printk(KERN_WARNING "airo: Unknown preamble\n"); + } + } else { + printk( KERN_WARNING "Couldn't figure out %s\n", line ); + } + while( line[0] && line[0] != '\n' ) line++; + if ( line[0] ) line++; + } + airo_config_commit(dev, NULL, NULL, NULL); +} + +static char *get_rmode(u16 mode) { + switch(mode&0xff) { + case RXMODE_RFMON: return "rfmon"; + case RXMODE_RFMON_ANYBSS: return "yna (any) bss rfmon"; + case RXMODE_LANMON: return "lanmon"; + } + return "ESS"; +} + +static int proc_config_open( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + int i; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + if ((data->wbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) { + kfree (data->rbuffer); + kfree (file->private_data); + return -ENOMEM; + } + memset( data->wbuffer, 0, 2048 ); + data->maxwritelen = 2048; + data->on_close = proc_config_on_close; + + readConfigRid(ai, 1); + + i = sprintf( data->rbuffer, + "Mode: %s\n" + "Radio: %s\n" + "NodeName: %-16s\n" + "PowerMode: %s\n" + "DataRates: %d %d %d %d %d %d %d %d\n" + "Channel: %d\n" + "XmitPower: %d\n", + (ai->config.opmode & 0xFF) == 0 ? "adhoc" : + (ai->config.opmode & 0xFF) == 1 ? get_rmode(ai->config.rmode): + (ai->config.opmode & 0xFF) == 2 ? "AP" : + (ai->config.opmode & 0xFF) == 3 ? "AP RPTR" : "Error", + test_bit(FLAG_RADIO_OFF, &ai->flags) ? "off" : "on", + ai->config.nodeName, + ai->config.powerSaveMode == 0 ? "CAM" : + ai->config.powerSaveMode == 1 ? "PSP" : + ai->config.powerSaveMode == 2 ? "PSPCAM" : "Error", + (int)ai->config.rates[0], + (int)ai->config.rates[1], + (int)ai->config.rates[2], + (int)ai->config.rates[3], + (int)ai->config.rates[4], + (int)ai->config.rates[5], + (int)ai->config.rates[6], + (int)ai->config.rates[7], + (int)ai->config.channelSet, + (int)ai->config.txPower + ); + sprintf( data->rbuffer + i, + "LongRetryLimit: %d\n" + "ShortRetryLimit: %d\n" + "RTSThreshold: %d\n" + "TXMSDULifetime: %d\n" + "RXMSDULifetime: %d\n" + "TXDiversity: %s\n" + "RXDiversity: %s\n" + "FragThreshold: %d\n" + "WEP: %s\n" + "Modulation: %s\n" + "Preamble: %s\n", + (int)ai->config.longRetryLimit, + (int)ai->config.shortRetryLimit, + (int)ai->config.rtsThres, + (int)ai->config.txLifetime, + (int)ai->config.rxLifetime, + ai->config.txDiversity == 1 ? "left" : + ai->config.txDiversity == 2 ? "right" : "both", + ai->config.rxDiversity == 1 ? "left" : + ai->config.rxDiversity == 2 ? "right" : "both", + (int)ai->config.fragThresh, + ai->config.authType == AUTH_ENCRYPT ? "encrypt" : + ai->config.authType == AUTH_SHAREDKEY ? "shared" : "open", + ai->config.modulation == 0 ? "default" : + ai->config.modulation == MOD_CCK ? "cck" : + ai->config.modulation == MOD_MOK ? "mok" : "error", + ai->config.preamble == PREAMBLE_AUTO ? "auto" : + ai->config.preamble == PREAMBLE_LONG ? "long" : + ai->config.preamble == PREAMBLE_SHORT ? "short" : "error" + ); + data->readlen = strlen( data->rbuffer ); + return 0; +} + +static void proc_SSID_on_close( struct inode *inode, struct file *file ) { + struct proc_data *data = (struct proc_data *)file->private_data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + SsidRid SSID_rid; + Resp rsp; + int i; + int offset = 0; + + if ( !data->writelen ) return; + + memset( &SSID_rid, 0, sizeof( SSID_rid ) ); + + for( i = 0; i < 3; i++ ) { + int j; + for( j = 0; j+offset < data->writelen && j < 32 && + data->wbuffer[offset+j] != '\n'; j++ ) { + SSID_rid.ssids[i].ssid[j] = data->wbuffer[offset+j]; + } + if ( j == 0 ) break; + SSID_rid.ssids[i].len = j; + offset += j; + while( data->wbuffer[offset] != '\n' && + offset < data->writelen ) offset++; + offset++; + } + if (i) + SSID_rid.len = sizeof(SSID_rid); + disable_MAC(ai, 1); + writeSsidRid(ai, &SSID_rid, 1); + enable_MAC(ai, &rsp, 1); +} + +inline static u8 hexVal(char c) { + if (c>='0' && c<='9') return c -= '0'; + if (c>='a' && c<='f') return c -= 'a'-10; + if (c>='A' && c<='F') return c -= 'A'-10; + return 0; +} + +static void proc_APList_on_close( struct inode *inode, struct file *file ) { + struct proc_data *data = (struct proc_data *)file->private_data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + APListRid APList_rid; + Resp rsp; + int i; + + if ( !data->writelen ) return; + + memset( &APList_rid, 0, sizeof(APList_rid) ); + APList_rid.len = sizeof(APList_rid); + + for( i = 0; i < 4 && data->writelen >= (i+1)*6*3; i++ ) { + int j; + for( j = 0; j < 6*3 && data->wbuffer[j+i*6*3]; j++ ) { + switch(j%3) { + case 0: + APList_rid.ap[i][j/3]= + hexVal(data->wbuffer[j+i*6*3])<<4; + break; + case 1: + APList_rid.ap[i][j/3]|= + hexVal(data->wbuffer[j+i*6*3]); + break; + } + } + } + disable_MAC(ai, 1); + writeAPListRid(ai, &APList_rid, 1); + enable_MAC(ai, &rsp, 1); +} + +/* This function wraps PC4500_writerid with a MAC disable */ +static int do_writerid( struct airo_info *ai, u16 rid, const void *rid_data, + int len, int dummy ) { + int rc; + Resp rsp; + + disable_MAC(ai, 1); + rc = PC4500_writerid(ai, rid, rid_data, len, 1); + enable_MAC(ai, &rsp, 1); + return rc; +} + +/* Returns the length of the key at the index. If index == 0xffff + * the index of the transmit key is returned. If the key doesn't exist, + * -1 will be returned. + */ +static int get_wep_key(struct airo_info *ai, u16 index) { + WepKeyRid wkr; + int rc; + u16 lastindex; + + rc = readWepKeyRid(ai, &wkr, 1, 1); + if (rc == SUCCESS) do { + lastindex = wkr.kindex; + if (wkr.kindex == index) { + if (index == 0xffff) { + return wkr.mac[0]; + } + return wkr.klen; + } + readWepKeyRid(ai, &wkr, 0, 1); + } while(lastindex != wkr.kindex); + return -1; +} + +static int set_wep_key(struct airo_info *ai, u16 index, + const char *key, u16 keylen, int perm, int lock ) { + static const unsigned char macaddr[ETH_ALEN] = { 0x01, 0, 0, 0, 0, 0 }; + WepKeyRid wkr; + Resp rsp; + + memset(&wkr, 0, sizeof(wkr)); + if (keylen == 0) { +// We are selecting which key to use + wkr.len = sizeof(wkr); + wkr.kindex = 0xffff; + wkr.mac[0] = (char)index; + if (perm) printk(KERN_INFO "Setting transmit key to %d\n", index); + if (perm) ai->defindex = (char)index; + } else { +// We are actually setting the key + wkr.len = sizeof(wkr); + wkr.kindex = index; + wkr.klen = keylen; + memcpy( wkr.key, key, keylen ); + memcpy( wkr.mac, macaddr, ETH_ALEN ); + printk(KERN_INFO "Setting key %d\n", index); + } + + disable_MAC(ai, lock); + writeWepKeyRid(ai, &wkr, perm, lock); + enable_MAC(ai, &rsp, lock); + return 0; +} + +static void proc_wepkey_on_close( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + int i; + char key[16]; + u16 index = 0; + int j = 0; + + memset(key, 0, sizeof(key)); + + data = (struct proc_data *)file->private_data; + if ( !data->writelen ) return; + + if (data->wbuffer[0] >= '0' && data->wbuffer[0] <= '3' && + (data->wbuffer[1] == ' ' || data->wbuffer[1] == '\n')) { + index = data->wbuffer[0] - '0'; + if (data->wbuffer[1] == '\n') { + set_wep_key(ai, index, NULL, 0, 1, 1); + return; + } + j = 2; + } else { + printk(KERN_ERR "airo: WepKey passed invalid key index\n"); + return; + } + + for( i = 0; i < 16*3 && data->wbuffer[i+j]; i++ ) { + switch(i%3) { + case 0: + key[i/3] = hexVal(data->wbuffer[i+j])<<4; + break; + case 1: + key[i/3] |= hexVal(data->wbuffer[i+j]); + break; + } + } + set_wep_key(ai, index, key, i/3, 1, 1); +} + +static int proc_wepkey_open( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + char *ptr; + WepKeyRid wkr; + u16 lastindex; + int j=0; + int rc; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + memset(&wkr, 0, sizeof(wkr)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 180, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + memset(data->rbuffer, 0, 180); + data->writelen = 0; + data->maxwritelen = 80; + if ((data->wbuffer = kmalloc( 80, GFP_KERNEL )) == NULL) { + kfree (data->rbuffer); + kfree (file->private_data); + return -ENOMEM; + } + memset( data->wbuffer, 0, 80 ); + data->on_close = proc_wepkey_on_close; + + ptr = data->rbuffer; + strcpy(ptr, "No wep keys\n"); + rc = readWepKeyRid(ai, &wkr, 1, 1); + if (rc == SUCCESS) do { + lastindex = wkr.kindex; + if (wkr.kindex == 0xffff) { + j += sprintf(ptr+j, "Tx key = %d\n", + (int)wkr.mac[0]); + } else { + j += sprintf(ptr+j, "Key %d set with length = %d\n", + (int)wkr.kindex, (int)wkr.klen); + } + readWepKeyRid(ai, &wkr, 0, 1); + } while((lastindex != wkr.kindex) && (j < 180-30)); + + data->readlen = strlen( data->rbuffer ); + return 0; +} + +static int proc_SSID_open( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + int i; + char *ptr; + SsidRid SSID_rid; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + data->writelen = 0; + data->maxwritelen = 33*3; + if ((data->wbuffer = kmalloc( 33*3, GFP_KERNEL )) == NULL) { + kfree (data->rbuffer); + kfree (file->private_data); + return -ENOMEM; + } + memset( data->wbuffer, 0, 33*3 ); + data->on_close = proc_SSID_on_close; + + readSsidRid(ai, &SSID_rid); + ptr = data->rbuffer; + for( i = 0; i < 3; i++ ) { + int j; + if ( !SSID_rid.ssids[i].len ) break; + for( j = 0; j < 32 && + j < SSID_rid.ssids[i].len && + SSID_rid.ssids[i].ssid[j]; j++ ) { + *ptr++ = SSID_rid.ssids[i].ssid[j]; + } + *ptr++ = '\n'; + } + *ptr = '\0'; + data->readlen = strlen( data->rbuffer ); + return 0; +} + +static int proc_APList_open( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + int i; + char *ptr; + APListRid APList_rid; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + data->writelen = 0; + data->maxwritelen = 4*6*3; + if ((data->wbuffer = kmalloc( data->maxwritelen, GFP_KERNEL )) == NULL) { + kfree (data->rbuffer); + kfree (file->private_data); + return -ENOMEM; + } + memset( data->wbuffer, 0, data->maxwritelen ); + data->on_close = proc_APList_on_close; + + readAPListRid(ai, &APList_rid); + ptr = data->rbuffer; + for( i = 0; i < 4; i++ ) { +// We end when we find a zero MAC + if ( !*(int*)APList_rid.ap[i] && + !*(int*)&APList_rid.ap[i][2]) break; + ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x\n", + (int)APList_rid.ap[i][0], + (int)APList_rid.ap[i][1], + (int)APList_rid.ap[i][2], + (int)APList_rid.ap[i][3], + (int)APList_rid.ap[i][4], + (int)APList_rid.ap[i][5]); + } + if (i==0) ptr += sprintf(ptr, "Not using specific APs\n"); + + *ptr = '\0'; + data->readlen = strlen( data->rbuffer ); + return 0; +} + +static int proc_BSSList_open( struct inode *inode, struct file *file ) { + struct proc_data *data; + struct proc_dir_entry *dp = PDE(inode); + struct net_device *dev = dp->data; + struct airo_info *ai = dev->priv; + char *ptr; + BSSListRid BSSList_rid; + int rc; + /* If doLoseSync is not 1, we won't do a Lose Sync */ + int doLoseSync = -1; + + if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) + return -ENOMEM; + memset(file->private_data, 0, sizeof(struct proc_data)); + data = (struct proc_data *)file->private_data; + if ((data->rbuffer = kmalloc( 1024, GFP_KERNEL )) == NULL) { + kfree (file->private_data); + return -ENOMEM; + } + data->writelen = 0; + data->maxwritelen = 0; + data->wbuffer = NULL; + data->on_close = NULL; + + if (file->f_mode & FMODE_WRITE) { + if (!(file->f_mode & FMODE_READ)) { + Cmd cmd; + Resp rsp; + + if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN; + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd=CMD_LISTBSS; + if (down_interruptible(&ai->sem)) + return -ERESTARTSYS; + issuecommand(ai, &cmd, &rsp); + up(&ai->sem); + data->readlen = 0; + return 0; + } + doLoseSync = 1; + } + ptr = data->rbuffer; + /* There is a race condition here if there are concurrent opens. + Since it is a rare condition, we'll just live with it, otherwise + we have to add a spin lock... */ + rc = readBSSListRid(ai, doLoseSync, &BSSList_rid); + while(rc == 0 && BSSList_rid.index != 0xffff) { + ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x %*s rssi = %d", + (int)BSSList_rid.bssid[0], + (int)BSSList_rid.bssid[1], + (int)BSSList_rid.bssid[2], + (int)BSSList_rid.bssid[3], + (int)BSSList_rid.bssid[4], + (int)BSSList_rid.bssid[5], + (int)BSSList_rid.ssidLen, + BSSList_rid.ssid, + (int)BSSList_rid.rssi); + ptr += sprintf(ptr, " channel = %d %s %s %s %s\n", + (int)BSSList_rid.dsChannel, + BSSList_rid.cap & CAP_ESS ? "ESS" : "", + BSSList_rid.cap & CAP_IBSS ? "adhoc" : "", + BSSList_rid.cap & CAP_PRIVACY ? "wep" : "", + BSSList_rid.cap & CAP_SHORTHDR ? "shorthdr" : ""); + rc = readBSSListRid(ai, 0, &BSSList_rid); + } + *ptr = '\0'; + data->readlen = strlen( data->rbuffer ); + return 0; +} + +static int proc_close( struct inode *inode, struct file *file ) +{ + struct proc_data *data = (struct proc_data *)file->private_data; + if ( data->on_close != NULL ) data->on_close( inode, file ); + if ( data->rbuffer ) kfree( data->rbuffer ); + if ( data->wbuffer ) kfree( data->wbuffer ); + kfree( data ); + return 0; +} + +static struct net_device_list { + struct net_device *dev; + struct net_device_list *next; +} *airo_devices; + +/* Since the card doesn't automatically switch to the right WEP mode, + we will make it do it. If the card isn't associated, every secs we + will switch WEP modes to see if that will help. If the card is + associated we will check every minute to see if anything has + changed. */ +static void timer_func( struct net_device *dev ) { + struct airo_info *apriv = dev->priv; + Resp rsp; + +/* We don't have a link so try changing the authtype */ + readConfigRid(apriv, 0); + disable_MAC(apriv, 0); + switch(apriv->config.authType) { + case AUTH_ENCRYPT: +/* So drop to OPEN */ + apriv->config.authType = AUTH_OPEN; + break; + case AUTH_SHAREDKEY: + if (apriv->keyindex < auto_wep) { + set_wep_key(apriv, apriv->keyindex, NULL, 0, 0, 0); + apriv->config.authType = AUTH_SHAREDKEY; + apriv->keyindex++; + } else { + /* Drop to ENCRYPT */ + apriv->keyindex = 0; + set_wep_key(apriv, apriv->defindex, NULL, 0, 0, 0); + apriv->config.authType = AUTH_ENCRYPT; + } + break; + default: /* We'll escalate to SHAREDKEY */ + apriv->config.authType = AUTH_SHAREDKEY; + } + set_bit (FLAG_COMMIT, &apriv->flags); + writeConfigRid(apriv, 0); + enable_MAC(apriv, &rsp, 0); + up(&apriv->sem); + +/* Schedule check to see if the change worked */ + clear_bit(JOB_AUTOWEP, &apriv->flags); + apriv->expires = RUN_AT(HZ*3); +} + +static int add_airo_dev( struct net_device *dev ) { + struct net_device_list *node = kmalloc( sizeof( *node ), GFP_KERNEL ); + if ( !node ) + return -ENOMEM; + + node->dev = dev; + node->next = airo_devices; + airo_devices = node; + + return 0; +} + +static void del_airo_dev( struct net_device *dev ) { + struct net_device_list **p = &airo_devices; + while( *p && ( (*p)->dev != dev ) ) + p = &(*p)->next; + if ( *p && (*p)->dev == dev ) + *p = (*p)->next; +} + +#ifdef CONFIG_PCI +static int __devinit airo_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pent) +{ + struct net_device *dev; + + if (pci_enable_device(pdev)) + return -ENODEV; + pci_set_master(pdev); + + if (pdev->device == 0x5000 || pdev->device == 0xa504) + dev = _init_airo_card(pdev->irq, pdev->resource[0].start, 0, pdev, &pdev->dev); + else + dev = _init_airo_card(pdev->irq, pdev->resource[2].start, 0, pdev, &pdev->dev); + if (!dev) + return -ENODEV; + + pci_set_drvdata(pdev, dev); + return 0; +} + +static void __devexit airo_pci_remove(struct pci_dev *pdev) +{ +} + +static int airo_pci_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct airo_info *ai = dev->priv; + Cmd cmd; + Resp rsp; + + if ((ai->APList == NULL) && + (ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL) + return -ENOMEM; + if ((ai->SSID == NULL) && + (ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL) + return -ENOMEM; + readAPListRid(ai, ai->APList); + readSsidRid(ai, ai->SSID); + memset(&cmd, 0, sizeof(cmd)); + /* the lock will be released at the end of the resume callback */ + if (down_interruptible(&ai->sem)) + return -EAGAIN; + disable_MAC(ai, 0); + netif_device_detach(dev); + ai->power = state; + cmd.cmd=HOSTSLEEP; + issuecommand(ai, &cmd, &rsp); + + pci_enable_wake(pdev, state, 1); + pci_save_state(pdev); + return pci_set_power_state(pdev, state); +} + +static int airo_pci_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct airo_info *ai = dev->priv; + Resp rsp; + + pci_set_power_state(pdev, 0); + pci_restore_state(pdev); + pci_enable_wake(pdev, ai->power, 0); + + if (ai->power > 1) { + reset_card(dev, 0); + mpi_init_descriptors(ai); + setup_card(ai, dev->dev_addr, 0); + clear_bit(FLAG_RADIO_OFF, &ai->flags); + clear_bit(FLAG_PENDING_XMIT, &ai->flags); + } else { + OUT4500(ai, EVACK, EV_AWAKEN); + OUT4500(ai, EVACK, EV_AWAKEN); + msleep(100); + } + + set_bit (FLAG_COMMIT, &ai->flags); + disable_MAC(ai, 0); + msleep(200); + if (ai->SSID) { + writeSsidRid(ai, ai->SSID, 0); + kfree(ai->SSID); + ai->SSID = NULL; + } + if (ai->APList) { + writeAPListRid(ai, ai->APList, 0); + kfree(ai->APList); + ai->APList = NULL; + } + writeConfigRid(ai, 0); + enable_MAC(ai, &rsp, 0); + ai->power = 0; + netif_device_attach(dev); + netif_wake_queue(dev); + enable_interrupts(ai); + up(&ai->sem); + return 0; +} +#endif + +static int __init airo_init_module( void ) +{ + int i, have_isa_dev = 0; + + airo_entry = create_proc_entry("aironet", + S_IFDIR | airo_perm, + proc_root_driver); + airo_entry->uid = proc_uid; + airo_entry->gid = proc_gid; + + for( i = 0; i < 4 && io[i] && irq[i]; i++ ) { + printk( KERN_INFO + "airo: Trying to configure ISA adapter at irq=%d io=0x%x\n", + irq[i], io[i] ); + if (init_airo_card( irq[i], io[i], 0, NULL )) + have_isa_dev = 1; + } + +#ifdef CONFIG_PCI + printk( KERN_INFO "airo: Probing for PCI adapters\n" ); + pci_register_driver(&airo_driver); + printk( KERN_INFO "airo: Finished probing for PCI adapters\n" ); +#endif + + /* Always exit with success, as we are a library module + * as well as a driver module + */ + return 0; +} + +static void __exit airo_cleanup_module( void ) +{ + while( airo_devices ) { + printk( KERN_INFO "airo: Unregistering %s\n", airo_devices->dev->name ); + stop_airo_card( airo_devices->dev, 1 ); + } +#ifdef CONFIG_PCI + pci_unregister_driver(&airo_driver); +#endif + remove_proc_entry("aironet", proc_root_driver); +} + +#ifdef WIRELESS_EXT +/* + * Initial Wireless Extension code for Aironet driver by : + * Jean Tourrilhes <jt@hpl.hp.com> - HPL - 17 November 00 + * Conversion to new driver API by : + * Jean Tourrilhes <jt@hpl.hp.com> - HPL - 26 March 02 + * Javier also did a good amount of work here, adding some new extensions + * and fixing my code. Let's just say that without him this code just + * would not work at all... - Jean II + */ + +static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid) +{ + int quality = 0; + + if ((status_rid->mode & 0x3f) == 0x3f && (cap_rid->hardCap & 8)) { + if (memcmp(cap_rid->prodName, "350", 3)) + if (status_rid->signalQuality > 0x20) + quality = 0; + else + quality = 0x20 - status_rid->signalQuality; + else + if (status_rid->signalQuality > 0xb0) + quality = 0; + else if (status_rid->signalQuality < 0x10) + quality = 0xa0; + else + quality = 0xb0 - status_rid->signalQuality; + } + return quality; +} + +#define airo_get_max_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x20 : 0xa0) +#define airo_get_avg_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x10 : 0x50); + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get protocol name + */ +static int airo_get_name(struct net_device *dev, + struct iw_request_info *info, + char *cwrq, + char *extra) +{ + strcpy(cwrq, "IEEE 802.11-DS"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set frequency + */ +static int airo_set_freq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *fwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int rc = -EINPROGRESS; /* Call commit handler */ + + /* If setting by frequency, convert to a channel */ + if((fwrq->e == 1) && + (fwrq->m >= (int) 2.412e8) && + (fwrq->m <= (int) 2.487e8)) { + int f = fwrq->m / 100000; + int c = 0; + while((c < 14) && (f != frequency_list[c])) + c++; + /* Hack to fall through... */ + fwrq->e = 0; + fwrq->m = c + 1; + } + /* Setting by channel number */ + if((fwrq->m > 1000) || (fwrq->e > 0)) + rc = -EOPNOTSUPP; + else { + int channel = fwrq->m; + /* We should do a better check than that, + * based on the card capability !!! */ + if((channel < 1) || (channel > 16)) { + printk(KERN_DEBUG "%s: New channel value of %d is invalid!\n", dev->name, fwrq->m); + rc = -EINVAL; + } else { + readConfigRid(local, 1); + /* Yes ! We can set it !!! */ + local->config.channelSet = (u16)(channel - 1); + set_bit (FLAG_COMMIT, &local->flags); + } + } + return rc; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get frequency + */ +static int airo_get_freq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *fwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + StatusRid status_rid; /* Card status info */ + + readConfigRid(local, 1); + if ((local->config.opmode & 0xFF) == MODE_STA_ESS) + status_rid.channel = local->config.channelSet; + else + readStatusRid(local, &status_rid, 1); + +#ifdef WEXT_USECHANNELS + fwrq->m = ((int)status_rid.channel) + 1; + fwrq->e = 0; +#else + { + int f = (int)status_rid.channel; + fwrq->m = frequency_list[f] * 100000; + fwrq->e = 1; + } +#endif + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set ESSID + */ +static int airo_set_essid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + Resp rsp; + SsidRid SSID_rid; /* SSIDs */ + + /* Reload the list of current SSID */ + readSsidRid(local, &SSID_rid); + + /* Check if we asked for `any' */ + if(dwrq->flags == 0) { + /* Just send an empty SSID list */ + memset(&SSID_rid, 0, sizeof(SSID_rid)); + } else { + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + + /* Check the size of the string */ + if(dwrq->length > IW_ESSID_MAX_SIZE+1) { + return -E2BIG ; + } + /* Check if index is valid */ + if((index < 0) || (index >= 4)) { + return -EINVAL; + } + + /* Set the SSID */ + memset(SSID_rid.ssids[index].ssid, 0, + sizeof(SSID_rid.ssids[index].ssid)); + memcpy(SSID_rid.ssids[index].ssid, extra, dwrq->length); + SSID_rid.ssids[index].len = dwrq->length - 1; + } + SSID_rid.len = sizeof(SSID_rid); + /* Write it to the card */ + disable_MAC(local, 1); + writeSsidRid(local, &SSID_rid, 1); + enable_MAC(local, &rsp, 1); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get ESSID + */ +static int airo_get_essid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + StatusRid status_rid; /* Card status info */ + + readStatusRid(local, &status_rid, 1); + + /* Note : if dwrq->flags != 0, we should + * get the relevant SSID from the SSID list... */ + + /* Get the current SSID */ + memcpy(extra, status_rid.SSID, status_rid.SSIDlen); + extra[status_rid.SSIDlen] = '\0'; + /* If none, we may want to get the one that was set */ + + /* Push it out ! */ + dwrq->length = status_rid.SSIDlen + 1; + dwrq->flags = 1; /* active */ + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set AP address + */ +static int airo_set_wap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *awrq, + char *extra) +{ + struct airo_info *local = dev->priv; + Cmd cmd; + Resp rsp; + APListRid APList_rid; + static const unsigned char bcast[ETH_ALEN] = { 255, 255, 255, 255, 255, 255 }; + + if (awrq->sa_family != ARPHRD_ETHER) + return -EINVAL; + else if (!memcmp(bcast, awrq->sa_data, ETH_ALEN)) { + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd=CMD_LOSE_SYNC; + if (down_interruptible(&local->sem)) + return -ERESTARTSYS; + issuecommand(local, &cmd, &rsp); + up(&local->sem); + } else { + memset(&APList_rid, 0, sizeof(APList_rid)); + APList_rid.len = sizeof(APList_rid); + memcpy(APList_rid.ap[0], awrq->sa_data, ETH_ALEN); + disable_MAC(local, 1); + writeAPListRid(local, &APList_rid, 1); + enable_MAC(local, &rsp, 1); + } + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get AP address + */ +static int airo_get_wap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *awrq, + char *extra) +{ + struct airo_info *local = dev->priv; + StatusRid status_rid; /* Card status info */ + + readStatusRid(local, &status_rid, 1); + + /* Tentative. This seems to work, wow, I'm lucky !!! */ + memcpy(awrq->sa_data, status_rid.bssid[0], ETH_ALEN); + awrq->sa_family = ARPHRD_ETHER; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Nickname + */ +static int airo_set_nick(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + /* Check the size of the string */ + if(dwrq->length > 16 + 1) { + return -E2BIG; + } + readConfigRid(local, 1); + memset(local->config.nodeName, 0, sizeof(local->config.nodeName)); + memcpy(local->config.nodeName, extra, dwrq->length); + set_bit (FLAG_COMMIT, &local->flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Nickname + */ +static int airo_get_nick(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + strncpy(extra, local->config.nodeName, 16); + extra[16] = '\0'; + dwrq->length = strlen(extra) + 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Bit-Rate + */ +static int airo_set_rate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + CapabilityRid cap_rid; /* Card capability info */ + u8 brate = 0; + int i; + + /* First : get a valid bit rate value */ + readCapabilityRid(local, &cap_rid, 1); + + /* Which type of value ? */ + if((vwrq->value < 8) && (vwrq->value >= 0)) { + /* Setting by rate index */ + /* Find value in the magic rate table */ + brate = cap_rid.supportedRates[vwrq->value]; + } else { + /* Setting by frequency value */ + u8 normvalue = (u8) (vwrq->value/500000); + + /* Check if rate is valid */ + for(i = 0 ; i < 8 ; i++) { + if(normvalue == cap_rid.supportedRates[i]) { + brate = normvalue; + break; + } + } + } + /* -1 designed the max rate (mostly auto mode) */ + if(vwrq->value == -1) { + /* Get the highest available rate */ + for(i = 0 ; i < 8 ; i++) { + if(cap_rid.supportedRates[i] == 0) + break; + } + if(i != 0) + brate = cap_rid.supportedRates[i - 1]; + } + /* Check that it is valid */ + if(brate == 0) { + return -EINVAL; + } + + readConfigRid(local, 1); + /* Now, check if we want a fixed or auto value */ + if(vwrq->fixed == 0) { + /* Fill all the rates up to this max rate */ + memset(local->config.rates, 0, 8); + for(i = 0 ; i < 8 ; i++) { + local->config.rates[i] = cap_rid.supportedRates[i]; + if(local->config.rates[i] == brate) + break; + } + } else { + /* Fixed mode */ + /* One rate, fixed */ + memset(local->config.rates, 0, 8); + local->config.rates[0] = brate; + } + set_bit (FLAG_COMMIT, &local->flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Bit-Rate + */ +static int airo_get_rate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + StatusRid status_rid; /* Card status info */ + + readStatusRid(local, &status_rid, 1); + + vwrq->value = status_rid.currentXmitRate * 500000; + /* If more than one rate, set auto */ + readConfigRid(local, 1); + vwrq->fixed = (local->config.rates[1] == 0); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set RTS threshold + */ +static int airo_set_rts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int rthr = vwrq->value; + + if(vwrq->disabled) + rthr = 2312; + if((rthr < 0) || (rthr > 2312)) { + return -EINVAL; + } + readConfigRid(local, 1); + local->config.rtsThres = rthr; + set_bit (FLAG_COMMIT, &local->flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get RTS threshold + */ +static int airo_get_rts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + vwrq->value = local->config.rtsThres; + vwrq->disabled = (vwrq->value >= 2312); + vwrq->fixed = 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Fragmentation threshold + */ +static int airo_set_frag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int fthr = vwrq->value; + + if(vwrq->disabled) + fthr = 2312; + if((fthr < 256) || (fthr > 2312)) { + return -EINVAL; + } + fthr &= ~0x1; /* Get an even value - is it really needed ??? */ + readConfigRid(local, 1); + local->config.fragThresh = (u16)fthr; + set_bit (FLAG_COMMIT, &local->flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Fragmentation threshold + */ +static int airo_get_frag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + vwrq->value = local->config.fragThresh; + vwrq->disabled = (vwrq->value >= 2312); + vwrq->fixed = 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Mode of Operation + */ +static int airo_set_mode(struct net_device *dev, + struct iw_request_info *info, + __u32 *uwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int reset = 0; + + readConfigRid(local, 1); + if ((local->config.rmode & 0xff) >= RXMODE_RFMON) + reset = 1; + + switch(*uwrq) { + case IW_MODE_ADHOC: + local->config.opmode &= 0xFF00; + local->config.opmode |= MODE_STA_IBSS; + local->config.rmode &= 0xfe00; + local->config.scanMode = SCANMODE_ACTIVE; + clear_bit (FLAG_802_11, &local->flags); + break; + case IW_MODE_INFRA: + local->config.opmode &= 0xFF00; + local->config.opmode |= MODE_STA_ESS; + local->config.rmode &= 0xfe00; + local->config.scanMode = SCANMODE_ACTIVE; + clear_bit (FLAG_802_11, &local->flags); + break; + case IW_MODE_MASTER: + local->config.opmode &= 0xFF00; + local->config.opmode |= MODE_AP; + local->config.rmode &= 0xfe00; + local->config.scanMode = SCANMODE_ACTIVE; + clear_bit (FLAG_802_11, &local->flags); + break; + case IW_MODE_REPEAT: + local->config.opmode &= 0xFF00; + local->config.opmode |= MODE_AP_RPTR; + local->config.rmode &= 0xfe00; + local->config.scanMode = SCANMODE_ACTIVE; + clear_bit (FLAG_802_11, &local->flags); + break; + case IW_MODE_MONITOR: + local->config.opmode &= 0xFF00; + local->config.opmode |= MODE_STA_ESS; + local->config.rmode &= 0xfe00; + local->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER; + local->config.scanMode = SCANMODE_PASSIVE; + set_bit (FLAG_802_11, &local->flags); + break; + default: + return -EINVAL; + } + if (reset) + set_bit (FLAG_RESET, &local->flags); + set_bit (FLAG_COMMIT, &local->flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Mode of Operation + */ +static int airo_get_mode(struct net_device *dev, + struct iw_request_info *info, + __u32 *uwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + /* If not managed, assume it's ad-hoc */ + switch (local->config.opmode & 0xFF) { + case MODE_STA_ESS: + *uwrq = IW_MODE_INFRA; + break; + case MODE_AP: + *uwrq = IW_MODE_MASTER; + break; + case MODE_AP_RPTR: + *uwrq = IW_MODE_REPEAT; + break; + default: + *uwrq = IW_MODE_ADHOC; + } + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Encryption Key + */ +static int airo_set_encode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + CapabilityRid cap_rid; /* Card capability info */ + + /* Is WEP supported ? */ + readCapabilityRid(local, &cap_rid, 1); + /* Older firmware doesn't support this... + if(!(cap_rid.softCap & 2)) { + return -EOPNOTSUPP; + } */ + readConfigRid(local, 1); + + /* Basic checking: do we have a key to set ? + * Note : with the new API, it's impossible to get a NULL pointer. + * Therefore, we need to check a key size == 0 instead. + * New version of iwconfig properly set the IW_ENCODE_NOKEY flag + * when no key is present (only change flags), but older versions + * don't do it. - Jean II */ + if (dwrq->length > 0) { + wep_key_t key; + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int current_index = get_wep_key(local, 0xffff); + /* Check the size of the key */ + if (dwrq->length > MAX_KEY_SIZE) { + return -EINVAL; + } + /* Check the index (none -> use current) */ + if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4:1))) + index = current_index; + /* Set the length */ + if (dwrq->length > MIN_KEY_SIZE) + key.len = MAX_KEY_SIZE; + else + if (dwrq->length > 0) + key.len = MIN_KEY_SIZE; + else + /* Disable the key */ + key.len = 0; + /* Check if the key is not marked as invalid */ + if(!(dwrq->flags & IW_ENCODE_NOKEY)) { + /* Cleanup */ + memset(key.key, 0, MAX_KEY_SIZE); + /* Copy the key in the driver */ + memcpy(key.key, extra, dwrq->length); + /* Send the key to the card */ + set_wep_key(local, index, key.key, key.len, 1, 1); + } + /* WE specify that if a valid key is set, encryption + * should be enabled (user may turn it off later) + * This is also how "iwconfig ethX key on" works */ + if((index == current_index) && (key.len > 0) && + (local->config.authType == AUTH_OPEN)) { + local->config.authType = AUTH_ENCRYPT; + set_bit (FLAG_COMMIT, &local->flags); + } + } else { + /* Do we want to just set the transmit key index ? */ + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) { + set_wep_key(local, index, NULL, 0, 1, 1); + } else + /* Don't complain if only change the mode */ + if(!dwrq->flags & IW_ENCODE_MODE) { + return -EINVAL; + } + } + /* Read the flags */ + if(dwrq->flags & IW_ENCODE_DISABLED) + local->config.authType = AUTH_OPEN; // disable encryption + if(dwrq->flags & IW_ENCODE_RESTRICTED) + local->config.authType = AUTH_SHAREDKEY; // Only Both + if(dwrq->flags & IW_ENCODE_OPEN) + local->config.authType = AUTH_ENCRYPT; // Only Wep + /* Commit the changes to flags if needed */ + if(dwrq->flags & IW_ENCODE_MODE) + set_bit (FLAG_COMMIT, &local->flags); + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Encryption Key + */ +static int airo_get_encode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + CapabilityRid cap_rid; /* Card capability info */ + + /* Is it supported ? */ + readCapabilityRid(local, &cap_rid, 1); + if(!(cap_rid.softCap & 2)) { + return -EOPNOTSUPP; + } + readConfigRid(local, 1); + /* Check encryption mode */ + switch(local->config.authType) { + case AUTH_ENCRYPT: + dwrq->flags = IW_ENCODE_OPEN; + break; + case AUTH_SHAREDKEY: + dwrq->flags = IW_ENCODE_RESTRICTED; + break; + default: + case AUTH_OPEN: + dwrq->flags = IW_ENCODE_DISABLED; + break; + } + /* We can't return the key, so set the proper flag and return zero */ + dwrq->flags |= IW_ENCODE_NOKEY; + memset(extra, 0, 16); + + /* Which key do we want ? -1 -> tx index */ + if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4 : 1))) + index = get_wep_key(local, 0xffff); + dwrq->flags |= index + 1; + /* Copy the key to the user buffer */ + dwrq->length = get_wep_key(local, index); + if (dwrq->length > 16) { + dwrq->length=0; + } + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Tx-Power + */ +static int airo_set_txpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + CapabilityRid cap_rid; /* Card capability info */ + int i; + int rc = -EINVAL; + + readCapabilityRid(local, &cap_rid, 1); + + if (vwrq->disabled) { + set_bit (FLAG_RADIO_OFF, &local->flags); + set_bit (FLAG_COMMIT, &local->flags); + return -EINPROGRESS; /* Call commit handler */ + } + if (vwrq->flags != IW_TXPOW_MWATT) { + return -EINVAL; + } + clear_bit (FLAG_RADIO_OFF, &local->flags); + for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++) + if ((vwrq->value==cap_rid.txPowerLevels[i])) { + readConfigRid(local, 1); + local->config.txPower = vwrq->value; + set_bit (FLAG_COMMIT, &local->flags); + rc = -EINPROGRESS; /* Call commit handler */ + break; + } + return rc; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Tx-Power + */ +static int airo_get_txpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + vwrq->value = local->config.txPower; + vwrq->fixed = 1; /* No power control */ + vwrq->disabled = test_bit(FLAG_RADIO_OFF, &local->flags); + vwrq->flags = IW_TXPOW_MWATT; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Retry limits + */ +static int airo_set_retry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int rc = -EINVAL; + + if(vwrq->disabled) { + return -EINVAL; + } + readConfigRid(local, 1); + if(vwrq->flags & IW_RETRY_LIMIT) { + if(vwrq->flags & IW_RETRY_MAX) + local->config.longRetryLimit = vwrq->value; + else if (vwrq->flags & IW_RETRY_MIN) + local->config.shortRetryLimit = vwrq->value; + else { + /* No modifier : set both */ + local->config.longRetryLimit = vwrq->value; + local->config.shortRetryLimit = vwrq->value; + } + set_bit (FLAG_COMMIT, &local->flags); + rc = -EINPROGRESS; /* Call commit handler */ + } + if(vwrq->flags & IW_RETRY_LIFETIME) { + local->config.txLifetime = vwrq->value / 1024; + set_bit (FLAG_COMMIT, &local->flags); + rc = -EINPROGRESS; /* Call commit handler */ + } + return rc; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Retry limits + */ +static int airo_get_retry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + vwrq->disabled = 0; /* Can't be disabled */ + + readConfigRid(local, 1); + /* Note : by default, display the min retry number */ + if((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + vwrq->flags = IW_RETRY_LIFETIME; + vwrq->value = (int)local->config.txLifetime * 1024; + } else if((vwrq->flags & IW_RETRY_MAX)) { + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + vwrq->value = (int)local->config.longRetryLimit; + } else { + vwrq->flags = IW_RETRY_LIMIT; + vwrq->value = (int)local->config.shortRetryLimit; + if((int)local->config.shortRetryLimit != (int)local->config.longRetryLimit) + vwrq->flags |= IW_RETRY_MIN; + } + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get range info + */ +static int airo_get_range(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + struct iw_range *range = (struct iw_range *) extra; + CapabilityRid cap_rid; /* Card capability info */ + int i; + int k; + + readCapabilityRid(local, &cap_rid, 1); + + dwrq->length = sizeof(struct iw_range); + memset(range, 0, sizeof(*range)); + range->min_nwid = 0x0000; + range->max_nwid = 0x0000; + range->num_channels = 14; + /* Should be based on cap_rid.country to give only + * what the current card support */ + k = 0; + for(i = 0; i < 14; i++) { + range->freq[k].i = i + 1; /* List index */ + range->freq[k].m = frequency_list[i] * 100000; + range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */ + } + range->num_frequency = k; + + /* Hum... Should put the right values there */ + range->max_qual.qual = airo_get_max_quality(&cap_rid); + range->max_qual.level = 0x100 - 120; /* -120 dBm */ + range->max_qual.noise = 0; + range->sensitivity = 65535; + + for(i = 0 ; i < 8 ; i++) { + range->bitrate[i] = cap_rid.supportedRates[i] * 500000; + if(range->bitrate[i] == 0) + break; + } + range->num_bitrates = i; + + /* Set an indication of the max TCP throughput + * in bit/s that we can expect using this interface. + * May be use for QoS stuff... Jean II */ + if(i > 2) + range->throughput = 5000 * 1000; + else + range->throughput = 1500 * 1000; + + range->min_rts = 0; + range->max_rts = 2312; + range->min_frag = 256; + range->max_frag = 2312; + + if(cap_rid.softCap & 2) { + // WEP: RC4 40 bits + range->encoding_size[0] = 5; + // RC4 ~128 bits + if (cap_rid.softCap & 0x100) { + range->encoding_size[1] = 13; + range->num_encoding_sizes = 2; + } else + range->num_encoding_sizes = 1; + range->max_encoding_tokens = (cap_rid.softCap & 0x80) ? 4 : 1; + } else { + range->num_encoding_sizes = 0; + range->max_encoding_tokens = 0; + } + range->min_pmp = 0; + range->max_pmp = 5000000; /* 5 secs */ + range->min_pmt = 0; + range->max_pmt = 65535 * 1024; /* ??? */ + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_TIMEOUT; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R; + + /* Transmit Power - values are in mW */ + for(i = 0 ; i < 8 ; i++) { + range->txpower[i] = cap_rid.txPowerLevels[i]; + if(range->txpower[i] == 0) + break; + } + range->num_txpower = i; + range->txpower_capa = IW_TXPOW_MWATT; + range->we_version_source = 12; + range->we_version_compiled = WIRELESS_EXT; + range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = IW_RETRY_LIFETIME; + range->min_retry = 1; + range->max_retry = 65535; + range->min_r_time = 1024; + range->max_r_time = 65535 * 1024; + /* Experimental measurements - boundary 11/5.5 Mb/s */ + /* Note : with or without the (local->rssi), results + * are somewhat different. - Jean II */ + range->avg_qual.qual = airo_get_avg_quality(&cap_rid); + if (local->rssi) + range->avg_qual.level = 186; /* -70 dBm */ + else + range->avg_qual.level = 176; /* -80 dBm */ + range->avg_qual.noise = 0; + + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_K_0 | + IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | + IW_EVENT_CAPA_MASK(SIOCGIWAP) | + IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVTXDROP); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Power Management + */ +static int airo_set_power(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + if (vwrq->disabled) { + if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) { + return -EINVAL; + } + local->config.powerSaveMode = POWERSAVE_CAM; + local->config.rmode &= 0xFF00; + local->config.rmode |= RXMODE_BC_MC_ADDR; + set_bit (FLAG_COMMIT, &local->flags); + return -EINPROGRESS; /* Call commit handler */ + } + if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + local->config.fastListenDelay = (vwrq->value + 500) / 1024; + local->config.powerSaveMode = POWERSAVE_PSPCAM; + set_bit (FLAG_COMMIT, &local->flags); + } else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) { + local->config.fastListenInterval = local->config.listenInterval = (vwrq->value + 500) / 1024; + local->config.powerSaveMode = POWERSAVE_PSPCAM; + set_bit (FLAG_COMMIT, &local->flags); + } + switch (vwrq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) { + return -EINVAL; + } + local->config.rmode &= 0xFF00; + local->config.rmode |= RXMODE_ADDR; + set_bit (FLAG_COMMIT, &local->flags); + break; + case IW_POWER_ALL_R: + if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) { + return -EINVAL; + } + local->config.rmode &= 0xFF00; + local->config.rmode |= RXMODE_BC_MC_ADDR; + set_bit (FLAG_COMMIT, &local->flags); + case IW_POWER_ON: + break; + default: + return -EINVAL; + } + // Note : we may want to factor local->need_commit here + // Note2 : may also want to factor RXMODE_RFMON test + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Power Management + */ +static int airo_get_power(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + int mode; + + readConfigRid(local, 1); + mode = local->config.powerSaveMode; + if ((vwrq->disabled = (mode == POWERSAVE_CAM))) + return 0; + if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + vwrq->value = (int)local->config.fastListenDelay * 1024; + vwrq->flags = IW_POWER_TIMEOUT; + } else { + vwrq->value = (int)local->config.fastListenInterval * 1024; + vwrq->flags = IW_POWER_PERIOD; + } + if ((local->config.rmode & 0xFF) == RXMODE_ADDR) + vwrq->flags |= IW_POWER_UNICAST_R; + else + vwrq->flags |= IW_POWER_ALL_R; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Sensitivity + */ +static int airo_set_sens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + local->config.rssiThreshold = vwrq->disabled ? RSSI_DEFAULT : vwrq->value; + set_bit (FLAG_COMMIT, &local->flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Sensitivity + */ +static int airo_get_sens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + + readConfigRid(local, 1); + vwrq->value = local->config.rssiThreshold; + vwrq->disabled = (vwrq->value == 0); + vwrq->fixed = 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get AP List + * Note : this is deprecated in favor of IWSCAN + */ +static int airo_get_aplist(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *local = dev->priv; + struct sockaddr *address = (struct sockaddr *) extra; + struct iw_quality qual[IW_MAX_AP]; + BSSListRid BSSList; + int i; + int loseSync = capable(CAP_NET_ADMIN) ? 1: -1; + + for (i = 0; i < IW_MAX_AP; i++) { + if (readBSSListRid(local, loseSync, &BSSList)) + break; + loseSync = 0; + memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN); + address[i].sa_family = ARPHRD_ETHER; + if (local->rssi) + qual[i].level = 0x100 - local->rssi[BSSList.rssi].rssidBm; + else + qual[i].level = (BSSList.rssi + 321) / 2; + qual[i].qual = qual[i].noise = 0; + qual[i].updated = 2; + if (BSSList.index == 0xffff) + break; + } + if (!i) { + StatusRid status_rid; /* Card status info */ + readStatusRid(local, &status_rid, 1); + for (i = 0; + i < min(IW_MAX_AP, 4) && + (status_rid.bssid[i][0] + & status_rid.bssid[i][1] + & status_rid.bssid[i][2] + & status_rid.bssid[i][3] + & status_rid.bssid[i][4] + & status_rid.bssid[i][5])!=0xff && + (status_rid.bssid[i][0] + | status_rid.bssid[i][1] + | status_rid.bssid[i][2] + | status_rid.bssid[i][3] + | status_rid.bssid[i][4] + | status_rid.bssid[i][5]); + i++) { + memcpy(address[i].sa_data, + status_rid.bssid[i], ETH_ALEN); + address[i].sa_family = ARPHRD_ETHER; + } + } else { + dwrq->flags = 1; /* Should be define'd */ + memcpy(extra + sizeof(struct sockaddr)*i, + &qual, sizeof(struct iw_quality)*i); + } + dwrq->length = i; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : Initiate Scan + */ +static int airo_set_scan(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct airo_info *ai = dev->priv; + Cmd cmd; + Resp rsp; + + /* Note : you may have realised that, as this is a SET operation, + * this is privileged and therefore a normal user can't + * perform scanning. + * This is not an error, while the device perform scanning, + * traffic doesn't flow, so it's a perfect DoS... + * Jean II */ + if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN; + + /* Initiate a scan command */ + memset(&cmd, 0, sizeof(cmd)); + cmd.cmd=CMD_LISTBSS; + if (down_interruptible(&ai->sem)) + return -ERESTARTSYS; + issuecommand(ai, &cmd, &rsp); + ai->scan_timestamp = jiffies; + up(&ai->sem); + + /* At this point, just return to the user. */ + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Translate scan data returned from the card to a card independent + * format that the Wireless Tools will understand - Jean II + */ +static inline char *airo_translate_scan(struct net_device *dev, + char *current_ev, + char *end_buf, + BSSListRid *list) +{ + struct airo_info *ai = dev->priv; + struct iw_event iwe; /* Temporary buffer */ + u16 capabilities; + char * current_val; /* For rates */ + int i; + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + iwe.u.data.length = list->ssidLen; + if(iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + + /* Add mode */ + iwe.cmd = SIOCGIWMODE; + capabilities = le16_to_cpu(list->cap); + if(capabilities & (CAP_ESS | CAP_IBSS)) { + if(capabilities & CAP_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + } + + /* Add frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = le16_to_cpu(list->dsChannel); + iwe.u.freq.m = frequency_list[iwe.u.freq.m] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); + + /* Add quality statistics */ + iwe.cmd = IWEVQUAL; + if (ai->rssi) + iwe.u.qual.level = 0x100 - ai->rssi[list->rssi].rssidBm; + else + iwe.u.qual.level = (list->rssi + 321) / 2; + iwe.u.qual.noise = 0; + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if(capabilities & CAP_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + + /* Rate : stuffing multiple values in a single event require a bit + * more of magic - Jean II */ + current_val = current_ev + IW_EV_LCP_LEN; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + /* Max 8 values */ + for(i = 0 ; i < 8 ; i++) { + /* NULL terminated */ + if(list->rates[i] == 0) + break; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((list->rates[i] & 0x7f) * 500000); + /* Add new value to event */ + current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if((current_val - current_ev) > IW_EV_LCP_LEN) + current_ev = current_val; + + /* The other data in the scan result are not really + * interesting, so for now drop it - Jean II */ + return current_ev; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : Read Scan Results + */ +static int airo_get_scan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct airo_info *ai = dev->priv; + BSSListRid BSSList; + int rc; + char *current_ev = extra; + + /* When we are associated again, the scan has surely finished. + * Just in case, let's make sure enough time has elapsed since + * we started the scan. - Javier */ + if(ai->scan_timestamp && time_before(jiffies,ai->scan_timestamp+3*HZ)) { + /* Important note : we don't want to block the caller + * until results are ready for various reasons. + * First, managing wait queues is complex and racy + * (there may be multiple simultaneous callers). + * Second, we grab some rtnetlink lock before comming + * here (in dev_ioctl()). + * Third, the caller can wait on the Wireless Event + * - Jean II */ + return -EAGAIN; + } + ai->scan_timestamp = 0; + + /* There's only a race with proc_BSSList_open(), but its + * consequences are begnign. So I don't bother fixing it - Javier */ + + /* Try to read the first entry of the scan result */ + rc = PC4500_readrid(ai, RID_BSSLISTFIRST, &BSSList, sizeof(BSSList), 1); + if((rc) || (BSSList.index == 0xffff)) { + /* Client error, no scan results... + * The caller need to restart the scan. */ + return -ENODATA; + } + + /* Read and parse all entries */ + while((!rc) && (BSSList.index != 0xffff)) { + /* Translate to WE format this entry */ + current_ev = airo_translate_scan(dev, current_ev, + extra + dwrq->length, + &BSSList); + + /* Check if there is space for one more entry */ + if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + return -E2BIG; + } + + /* Read next entry */ + rc = PC4500_readrid(ai, RID_BSSLISTNEXT, + &BSSList, sizeof(BSSList), 1); + } + /* Length of data */ + dwrq->length = (current_ev - extra); + dwrq->flags = 0; /* todo */ + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Commit handler : called after a bunch of SET operations + */ +static int airo_config_commit(struct net_device *dev, + struct iw_request_info *info, /* NULL */ + void *zwrq, /* NULL */ + char *extra) /* NULL */ +{ + struct airo_info *local = dev->priv; + Resp rsp; + + if (!test_bit (FLAG_COMMIT, &local->flags)) + return 0; + + /* Some of the "SET" function may have modified some of the + * parameters. It's now time to commit them in the card */ + disable_MAC(local, 1); + if (test_bit (FLAG_RESET, &local->flags)) { + APListRid APList_rid; + SsidRid SSID_rid; + + readAPListRid(local, &APList_rid); + readSsidRid(local, &SSID_rid); + if (test_bit(FLAG_MPI,&local->flags)) + setup_card(local, dev->dev_addr, 1 ); + else + reset_airo_card(dev); + disable_MAC(local, 1); + writeSsidRid(local, &SSID_rid, 1); + writeAPListRid(local, &APList_rid, 1); + } + if (down_interruptible(&local->sem)) + return -ERESTARTSYS; + writeConfigRid(local, 0); + enable_MAC(local, &rsp, 0); + if (test_bit (FLAG_RESET, &local->flags)) + airo_set_promisc(local); + else + up(&local->sem); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Structures to export the Wireless Handlers + */ + +static const struct iw_priv_args airo_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + { AIROIOCTL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl), + IW_PRIV_TYPE_BYTE | 2047, "airoioctl" }, + { AIROIDIFC, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl), + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "airoidifc" }, +}; + +static const iw_handler airo_handler[] = +{ + (iw_handler) airo_config_commit, /* SIOCSIWCOMMIT */ + (iw_handler) airo_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) airo_set_freq, /* SIOCSIWFREQ */ + (iw_handler) airo_get_freq, /* SIOCGIWFREQ */ + (iw_handler) airo_set_mode, /* SIOCSIWMODE */ + (iw_handler) airo_get_mode, /* SIOCGIWMODE */ + (iw_handler) airo_set_sens, /* SIOCSIWSENS */ + (iw_handler) airo_get_sens, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWRANGE */ + (iw_handler) airo_get_range, /* SIOCGIWRANGE */ + (iw_handler) NULL, /* SIOCSIWPRIV */ + (iw_handler) NULL, /* SIOCGIWPRIV */ + (iw_handler) NULL, /* SIOCSIWSTATS */ + (iw_handler) NULL, /* SIOCGIWSTATS */ + iw_handler_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ + (iw_handler) airo_set_wap, /* SIOCSIWAP */ + (iw_handler) airo_get_wap, /* SIOCGIWAP */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) airo_get_aplist, /* SIOCGIWAPLIST */ + (iw_handler) airo_set_scan, /* SIOCSIWSCAN */ + (iw_handler) airo_get_scan, /* SIOCGIWSCAN */ + (iw_handler) airo_set_essid, /* SIOCSIWESSID */ + (iw_handler) airo_get_essid, /* SIOCGIWESSID */ + (iw_handler) airo_set_nick, /* SIOCSIWNICKN */ + (iw_handler) airo_get_nick, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) airo_set_rate, /* SIOCSIWRATE */ + (iw_handler) airo_get_rate, /* SIOCGIWRATE */ + (iw_handler) airo_set_rts, /* SIOCSIWRTS */ + (iw_handler) airo_get_rts, /* SIOCGIWRTS */ + (iw_handler) airo_set_frag, /* SIOCSIWFRAG */ + (iw_handler) airo_get_frag, /* SIOCGIWFRAG */ + (iw_handler) airo_set_txpow, /* SIOCSIWTXPOW */ + (iw_handler) airo_get_txpow, /* SIOCGIWTXPOW */ + (iw_handler) airo_set_retry, /* SIOCSIWRETRY */ + (iw_handler) airo_get_retry, /* SIOCGIWRETRY */ + (iw_handler) airo_set_encode, /* SIOCSIWENCODE */ + (iw_handler) airo_get_encode, /* SIOCGIWENCODE */ + (iw_handler) airo_set_power, /* SIOCSIWPOWER */ + (iw_handler) airo_get_power, /* SIOCGIWPOWER */ +}; + +/* Note : don't describe AIROIDIFC and AIROOLDIDIFC in here. + * We want to force the use of the ioctl code, because those can't be + * won't work the iw_handler code (because they simultaneously read + * and write data and iw_handler can't do that). + * Note that it's perfectly legal to read/write on a single ioctl command, + * you just can't use iwpriv and need to force it via the ioctl handler. + * Jean II */ +static const iw_handler airo_private_handler[] = +{ + NULL, /* SIOCIWFIRSTPRIV */ +}; + +static const struct iw_handler_def airo_handler_def = +{ + .num_standard = sizeof(airo_handler)/sizeof(iw_handler), + .num_private = sizeof(airo_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(airo_private_args)/sizeof(struct iw_priv_args), + .standard = airo_handler, + .private = airo_private_handler, + .private_args = airo_private_args, + .get_wireless_stats = airo_get_wireless_stats, +}; + +#endif /* WIRELESS_EXT */ + +/* + * This defines the configuration part of the Wireless Extensions + * Note : irq and spinlock protection will occur in the subroutines + * + * TODO : + * o Check input value more carefully and fill correct values in range + * o Test and shakeout the bugs (if any) + * + * Jean II + * + * Javier Achirica did a great job of merging code from the unnamed CISCO + * developer that added support for flashing the card. + */ +static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + int rc = 0; + struct airo_info *ai = (struct airo_info *)dev->priv; + + if (ai->power) + return 0; + + switch (cmd) { +#ifdef CISCO_EXT + case AIROIDIFC: +#ifdef AIROOLDIDIFC + case AIROOLDIDIFC: +#endif + { + int val = AIROMAGIC; + aironet_ioctl com; + if (copy_from_user(&com,rq->ifr_data,sizeof(com))) + rc = -EFAULT; + else if (copy_to_user(com.data,(char *)&val,sizeof(val))) + rc = -EFAULT; + } + break; + + case AIROIOCTL: +#ifdef AIROOLDIOCTL + case AIROOLDIOCTL: +#endif + /* Get the command struct and hand it off for evaluation by + * the proper subfunction + */ + { + aironet_ioctl com; + if (copy_from_user(&com,rq->ifr_data,sizeof(com))) { + rc = -EFAULT; + break; + } + + /* Separate R/W functions bracket legality here + */ + if ( com.command == AIRORSWVERSION ) { + if (copy_to_user(com.data, swversion, sizeof(swversion))) + rc = -EFAULT; + else + rc = 0; + } + else if ( com.command <= AIRORRID) + rc = readrids(dev,&com); + else if ( com.command >= AIROPCAP && com.command <= (AIROPLEAPUSR+2) ) + rc = writerids(dev,&com); + else if ( com.command >= AIROFLSHRST && com.command <= AIRORESTART ) + rc = flashcard(dev,&com); + else + rc = -EINVAL; /* Bad command in ioctl */ + } + break; +#endif /* CISCO_EXT */ + + // All other calls are currently unsupported + default: + rc = -EOPNOTSUPP; + } + return rc; +} + +#ifdef WIRELESS_EXT +/* + * Get the Wireless stats out of the driver + * Note : irq and spinlock protection will occur in the subroutines + * + * TODO : + * o Check if work in Ad-Hoc mode (otherwise, use SPY, as in wvlan_cs) + * + * Jean + */ +static void airo_read_wireless_stats(struct airo_info *local) +{ + StatusRid status_rid; + StatsRid stats_rid; + CapabilityRid cap_rid; + u32 *vals = stats_rid.vals; + + /* Get stats out of the card */ + clear_bit(JOB_WSTATS, &local->flags); + if (local->power) { + up(&local->sem); + return; + } + readCapabilityRid(local, &cap_rid, 0); + readStatusRid(local, &status_rid, 0); + readStatsRid(local, &stats_rid, RID_STATS, 0); + up(&local->sem); + + /* The status */ + local->wstats.status = status_rid.mode; + + /* Signal quality and co. But where is the noise level ??? */ + local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); + if (local->rssi) + local->wstats.qual.level = 0x100 - local->rssi[status_rid.sigQuality].rssidBm; + else + local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2; + if (status_rid.len >= 124) { + local->wstats.qual.noise = 256 - status_rid.noisedBm; + local->wstats.qual.updated = 7; + } else { + local->wstats.qual.noise = 0; + local->wstats.qual.updated = 3; + } + + /* Packets discarded in the wireless adapter due to wireless + * specific problems */ + local->wstats.discard.nwid = vals[56] + vals[57] + vals[58];/* SSID Mismatch */ + local->wstats.discard.code = vals[6];/* RxWepErr */ + local->wstats.discard.fragment = vals[30]; + local->wstats.discard.retries = vals[10]; + local->wstats.discard.misc = vals[1] + vals[32]; + local->wstats.miss.beacon = vals[34]; +} + +struct iw_statistics *airo_get_wireless_stats(struct net_device *dev) +{ + struct airo_info *local = dev->priv; + + if (!test_bit(JOB_WSTATS, &local->flags)) { + /* Get stats out of the card if available */ + if (down_trylock(&local->sem) != 0) { + set_bit(JOB_WSTATS, &local->flags); + wake_up_interruptible(&local->thr_wait); + } else + airo_read_wireless_stats(local); + } + + return &local->wstats; +} +#endif /* WIRELESS_EXT */ + +#ifdef CISCO_EXT +/* + * This just translates from driver IOCTL codes to the command codes to + * feed to the radio's host interface. Things can be added/deleted + * as needed. This represents the READ side of control I/O to + * the card + */ +static int readrids(struct net_device *dev, aironet_ioctl *comp) { + unsigned short ridcode; + unsigned char *iobuf; + int len; + struct airo_info *ai = dev->priv; + Resp rsp; + + if (test_bit(FLAG_FLASHING, &ai->flags)) + return -EIO; + + switch(comp->command) + { + case AIROGCAP: ridcode = RID_CAPABILITIES; break; + case AIROGCFG: ridcode = RID_CONFIG; + if (test_bit(FLAG_COMMIT, &ai->flags)) { + disable_MAC (ai, 1); + writeConfigRid (ai, 1); + enable_MAC (ai, &rsp, 1); + } + break; + case AIROGSLIST: ridcode = RID_SSID; break; + case AIROGVLIST: ridcode = RID_APLIST; break; + case AIROGDRVNAM: ridcode = RID_DRVNAME; break; + case AIROGEHTENC: ridcode = RID_ETHERENCAP; break; + case AIROGWEPKTMP: ridcode = RID_WEP_TEMP; + /* Only super-user can read WEP keys */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + break; + case AIROGWEPKNV: ridcode = RID_WEP_PERM; + /* Only super-user can read WEP keys */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + break; + case AIROGSTAT: ridcode = RID_STATUS; break; + case AIROGSTATSD32: ridcode = RID_STATSDELTA; break; + case AIROGSTATSC32: ridcode = RID_STATS; break; +#ifdef MICSUPPORT + case AIROGMICSTATS: + if (copy_to_user(comp->data, &ai->micstats, + min((int)comp->len,(int)sizeof(ai->micstats)))) + return -EFAULT; + return 0; +#endif + case AIRORRID: ridcode = comp->ridnum; break; + default: + return -EINVAL; + break; + } + + if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL) + return -ENOMEM; + + PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1); + /* get the count of bytes in the rid docs say 1st 2 bytes is it. + * then return it to the user + * 9/22/2000 Honor user given length + */ + len = comp->len; + + if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { + kfree (iobuf); + return -EFAULT; + } + kfree (iobuf); + return 0; +} + +/* + * Danger Will Robinson write the rids here + */ + +static int writerids(struct net_device *dev, aironet_ioctl *comp) { + struct airo_info *ai = dev->priv; + int ridcode; +#ifdef MICSUPPORT + int enabled; +#endif + Resp rsp; + static int (* writer)(struct airo_info *, u16 rid, const void *, int, int); + unsigned char *iobuf; + + /* Only super-user can write RIDs */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (test_bit(FLAG_FLASHING, &ai->flags)) + return -EIO; + + ridcode = 0; + writer = do_writerid; + + switch(comp->command) + { + case AIROPSIDS: ridcode = RID_SSID; break; + case AIROPCAP: ridcode = RID_CAPABILITIES; break; + case AIROPAPLIST: ridcode = RID_APLIST; break; + case AIROPCFG: ai->config.len = 0; + clear_bit(FLAG_COMMIT, &ai->flags); + ridcode = RID_CONFIG; break; + case AIROPWEPKEYNV: ridcode = RID_WEP_PERM; break; + case AIROPLEAPUSR: ridcode = RID_LEAPUSERNAME; break; + case AIROPLEAPPWD: ridcode = RID_LEAPPASSWORD; break; + case AIROPWEPKEY: ridcode = RID_WEP_TEMP; writer = PC4500_writerid; + break; + case AIROPLEAPUSR+1: ridcode = 0xFF2A; break; + case AIROPLEAPUSR+2: ridcode = 0xFF2B; break; + + /* this is not really a rid but a command given to the card + * same with MAC off + */ + case AIROPMACON: + if (enable_MAC(ai, &rsp, 1) != 0) + return -EIO; + return 0; + + /* + * Evidently this code in the airo driver does not get a symbol + * as disable_MAC. it's probably so short the compiler does not gen one. + */ + case AIROPMACOFF: + disable_MAC(ai, 1); + return 0; + + /* This command merely clears the counts does not actually store any data + * only reads rid. But as it changes the cards state, I put it in the + * writerid routines. + */ + case AIROPSTCLR: + if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL) + return -ENOMEM; + + PC4500_readrid(ai,RID_STATSDELTACLEAR,iobuf,RIDSIZE, 1); + +#ifdef MICSUPPORT + enabled = ai->micstats.enabled; + memset(&ai->micstats,0,sizeof(ai->micstats)); + ai->micstats.enabled = enabled; +#endif + + if (copy_to_user(comp->data, iobuf, + min((int)comp->len, (int)RIDSIZE))) { + kfree (iobuf); + return -EFAULT; + } + kfree (iobuf); + return 0; + + default: + return -EOPNOTSUPP; /* Blarg! */ + } + if(comp->len > RIDSIZE) + return -EINVAL; + + if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL) + return -ENOMEM; + + if (copy_from_user(iobuf,comp->data,comp->len)) { + kfree (iobuf); + return -EFAULT; + } + + if (comp->command == AIROPCFG) { + ConfigRid *cfg = (ConfigRid *)iobuf; + + if (test_bit(FLAG_MIC_CAPABLE, &ai->flags)) + cfg->opmode |= MODE_MIC; + + if ((cfg->opmode & 0xFF) == MODE_STA_IBSS) + set_bit (FLAG_ADHOC, &ai->flags); + else + clear_bit (FLAG_ADHOC, &ai->flags); + } + + if((*writer)(ai, ridcode, iobuf,comp->len,1)) { + kfree (iobuf); + return -EIO; + } + kfree (iobuf); + return 0; +} + +/***************************************************************************** + * Ancillary flash / mod functions much black magic lurkes here * + ***************************************************************************** + */ + +/* + * Flash command switch table + */ + +int flashcard(struct net_device *dev, aironet_ioctl *comp) { + int z; + int cmdreset(struct airo_info *); + int setflashmode(struct airo_info *); + int flashgchar(struct airo_info *,int,int); + int flashpchar(struct airo_info *,int,int); + int flashputbuf(struct airo_info *); + int flashrestart(struct airo_info *,struct net_device *); + + /* Only super-user can modify flash */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + switch(comp->command) + { + case AIROFLSHRST: + return cmdreset((struct airo_info *)dev->priv); + + case AIROFLSHSTFL: + if (!((struct airo_info *)dev->priv)->flash && + (((struct airo_info *)dev->priv)->flash = kmalloc (FLASHSIZE, GFP_KERNEL)) == NULL) + return -ENOMEM; + return setflashmode((struct airo_info *)dev->priv); + + case AIROFLSHGCHR: /* Get char from aux */ + if(comp->len != sizeof(int)) + return -EINVAL; + if (copy_from_user(&z,comp->data,comp->len)) + return -EFAULT; + return flashgchar((struct airo_info *)dev->priv,z,8000); + + case AIROFLSHPCHR: /* Send char to card. */ + if(comp->len != sizeof(int)) + return -EINVAL; + if (copy_from_user(&z,comp->data,comp->len)) + return -EFAULT; + return flashpchar((struct airo_info *)dev->priv,z,8000); + + case AIROFLPUTBUF: /* Send 32k to card */ + if (!((struct airo_info *)dev->priv)->flash) + return -ENOMEM; + if(comp->len > FLASHSIZE) + return -EINVAL; + if(copy_from_user(((struct airo_info *)dev->priv)->flash,comp->data,comp->len)) + return -EFAULT; + + flashputbuf((struct airo_info *)dev->priv); + return 0; + + case AIRORESTART: + if(flashrestart((struct airo_info *)dev->priv,dev)) + return -EIO; + return 0; + } + return -EINVAL; +} + +#define FLASH_COMMAND 0x7e7e + +/* + * STEP 1) + * Disable MAC and do soft reset on + * card. + */ + +int cmdreset(struct airo_info *ai) { + disable_MAC(ai, 1); + + if(!waitbusy (ai)){ + printk(KERN_INFO "Waitbusy hang before RESET\n"); + return -EBUSY; + } + + OUT4500(ai,COMMAND,CMD_SOFTRESET); + + ssleep(1); /* WAS 600 12/7/00 */ + + if(!waitbusy (ai)){ + printk(KERN_INFO "Waitbusy hang AFTER RESET\n"); + return -EBUSY; + } + return 0; +} + +/* STEP 2) + * Put the card in legendary flash + * mode + */ + +int setflashmode (struct airo_info *ai) { + set_bit (FLAG_FLASHING, &ai->flags); + + OUT4500(ai, SWS0, FLASH_COMMAND); + OUT4500(ai, SWS1, FLASH_COMMAND); + if (probe) { + OUT4500(ai, SWS0, FLASH_COMMAND); + OUT4500(ai, COMMAND,0x10); + } else { + OUT4500(ai, SWS2, FLASH_COMMAND); + OUT4500(ai, SWS3, FLASH_COMMAND); + OUT4500(ai, COMMAND,0); + } + msleep(500); /* 500ms delay */ + + if(!waitbusy(ai)) { + clear_bit (FLAG_FLASHING, &ai->flags); + printk(KERN_INFO "Waitbusy hang after setflash mode\n"); + return -EIO; + } + return 0; +} + +/* Put character to SWS0 wait for dwelltime + * x 50us for echo . + */ + +int flashpchar(struct airo_info *ai,int byte,int dwelltime) { + int echo; + int waittime; + + byte |= 0x8000; + + if(dwelltime == 0 ) + dwelltime = 200; + + waittime=dwelltime; + + /* Wait for busy bit d15 to go false indicating buffer empty */ + while ((IN4500 (ai, SWS0) & 0x8000) && waittime > 0) { + udelay (50); + waittime -= 50; + } + + /* timeout for busy clear wait */ + if(waittime <= 0 ){ + printk(KERN_INFO "flash putchar busywait timeout! \n"); + return -EBUSY; + } + + /* Port is clear now write byte and wait for it to echo back */ + do { + OUT4500(ai,SWS0,byte); + udelay(50); + dwelltime -= 50; + echo = IN4500(ai,SWS1); + } while (dwelltime >= 0 && echo != byte); + + OUT4500(ai,SWS1,0); + + return (echo == byte) ? 0 : -EIO; +} + +/* + * Get a character from the card matching matchbyte + * Step 3) + */ +int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){ + int rchar; + unsigned char rbyte=0; + + do { + rchar = IN4500(ai,SWS1); + + if(dwelltime && !(0x8000 & rchar)){ + dwelltime -= 10; + mdelay(10); + continue; + } + rbyte = 0xff & rchar; + + if( (rbyte == matchbyte) && (0x8000 & rchar) ){ + OUT4500(ai,SWS1,0); + return 0; + } + if( rbyte == 0x81 || rbyte == 0x82 || rbyte == 0x83 || rbyte == 0x1a || 0xffff == rchar) + break; + OUT4500(ai,SWS1,0); + + }while(dwelltime > 0); + return -EIO; +} + +/* + * Transfer 32k of firmware data from user buffer to our buffer and + * send to the card + */ + +int flashputbuf(struct airo_info *ai){ + int nwords; + + /* Write stuff */ + if (test_bit(FLAG_MPI,&ai->flags)) + memcpy_toio(ai->pciaux + 0x8000, ai->flash, FLASHSIZE); + else { + OUT4500(ai,AUXPAGE,0x100); + OUT4500(ai,AUXOFF,0); + + for(nwords=0;nwords != FLASHSIZE / 2;nwords++){ + OUT4500(ai,AUXDATA,ai->flash[nwords] & 0xffff); + } + } + OUT4500(ai,SWS0,0x8000); + + return 0; +} + +/* + * + */ +int flashrestart(struct airo_info *ai,struct net_device *dev){ + int i,status; + + ssleep(1); /* Added 12/7/00 */ + clear_bit (FLAG_FLASHING, &ai->flags); + if (test_bit(FLAG_MPI, &ai->flags)) { + status = mpi_init_descriptors(ai); + if (status != SUCCESS) + return status; + } + status = setup_card(ai, dev->dev_addr, 1); + + if (!test_bit(FLAG_MPI,&ai->flags)) + for( i = 0; i < MAX_FIDS; i++ ) { + ai->fids[i] = transmit_allocate + ( ai, 2312, i >= MAX_FIDS / 2 ); + } + + ssleep(1); /* Added 12/7/00 */ + return status; +} +#endif /* CISCO_EXT */ + +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + In addition: + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +module_init(airo_init_module); +module_exit(airo_cleanup_module); diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c new file mode 100644 index 00000000000..fbf53af6cda --- /dev/null +++ b/drivers/net/wireless/airo_cs.c @@ -0,0 +1,622 @@ +/*====================================================================== + + Aironet driver for 4500 and 4800 series cards + + This code is released under both the GPL version 2 and BSD licenses. + Either license may be used. The respective licenses are found at + the end of this file. + + This code was developed by Benjamin Reed <breed@users.sourceforge.net> + including portions of which come from the Aironet PC4500 + Developer's Reference Manual and used with permission. Copyright + (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use + code in the Developer's manual was granted for this driver by + Aironet. + + In addition this module was derived from dummy_cs. + The initial developer of dummy_cs is David A. Hinds + <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + +======================================================================*/ + +#include <linux/config.h> +#ifdef __IN_PCMCIA_PACKAGE__ +#include <pcmcia/k_compat.h> +#endif +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/netdevice.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <asm/io.h> +#include <asm/system.h> + +/* + All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If + you do not define PCMCIA_DEBUG at all, all the debug code will be + left out. If you compile with PCMCIA_DEBUG=0, the debug code will + be present but disabled -- but it can then be enabled for specific + modules at load time with a 'pc_debug=#' option to insmod. +*/ +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +static char *version = "$Revision: 1.2 $"; +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); +#else +#define DEBUG(n, args...) +#endif + +/*====================================================================*/ + +MODULE_AUTHOR("Benjamin Reed"); +MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ + cards. This is the module that links the PCMCIA card \ + with the airo module."); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); + +/*====================================================================*/ + +/* + The event() function is this driver's Card Services event handler. + It will be called by Card Services when an appropriate card status + event is received. The config() and release() entry points are + used to configure or release a socket, in response to card + insertion and ejection events. They are invoked from the airo_cs + event handler. +*/ + +struct net_device *init_airo_card( int, int, int, struct device * ); +void stop_airo_card( struct net_device *, int ); +int reset_airo_card( struct net_device * ); + +static void airo_config(dev_link_t *link); +static void airo_release(dev_link_t *link); +static int airo_event(event_t event, int priority, + event_callback_args_t *args); + +/* + The attach() and detach() entry points are used to create and destroy + "instances" of the driver, where each instance represents everything + needed to manage one actual PCMCIA card. +*/ + +static dev_link_t *airo_attach(void); +static void airo_detach(dev_link_t *); + +/* + You'll also need to prototype all the functions that will actually + be used to talk to your device. See 'pcmem_cs' for a good example + of a fully self-sufficient driver; the other drivers rely more or + less on other parts of the kernel. +*/ + +/* + The dev_info variable is the "key" that is used to match up this + device driver with appropriate cards, through the card configuration + database. +*/ + +static dev_info_t dev_info = "airo_cs"; + +/* + A linked list of "instances" of the aironet device. Each actual + PCMCIA card corresponds to one device instance, and is described + by one dev_link_t structure (defined in ds.h). + + You may not want to use a linked list for this -- for example, the + memory card driver uses an array of dev_link_t pointers, where minor + device numbers are used to derive the corresponding array index. +*/ + +static dev_link_t *dev_list = NULL; + +/* + A dev_link_t structure has fields for most things that are needed + to keep track of a socket, but there will usually be some device + specific information that also needs to be kept track of. The + 'priv' pointer in a dev_link_t structure can be used to point to + a device-specific private data structure, like this. + + A driver needs to provide a dev_node_t structure for each device + on a card. In some cases, there is only one device per card (for + example, ethernet cards, modems). In other cases, there may be + many actual or logical devices (SCSI adapters, memory cards with + multiple partitions). The dev_node_t structures need to be kept + in a linked list starting at the 'dev' field of a dev_link_t + structure. We allocate them in the card's private data structure, + because they generally shouldn't be allocated dynamically. + + In this case, we also provide a flag to indicate if a device is + "stopped" due to a power management event, or card ejection. The + device IO routines can use a flag like this to throttle IO to a + card that is not ready to accept it. +*/ + +typedef struct local_info_t { + dev_node_t node; + struct net_device *eth_dev; +} local_info_t; + +/*====================================================================== + + airo_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + + The dev_link structure is initialized, but we don't actually + configure the card at this point -- we wait until we receive a + card insertion event. + + ======================================================================*/ + +static dev_link_t *airo_attach(void) +{ + client_reg_t client_reg; + dev_link_t *link; + local_info_t *local; + int ret; + + DEBUG(0, "airo_attach()\n"); + + /* Initialize the dev_link_t structure */ + link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL); + if (!link) { + printk(KERN_ERR "airo_cs: no memory for new device\n"); + return NULL; + } + memset(link, 0, sizeof(struct dev_link_t)); + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = NULL; + + /* + General socket configuration defaults can go here. In this + client, we assume very little, and rely on the CIS for almost + everything. In most clients, many details (i.e., number, sizes, + and attributes of IO windows) are fixed by the nature of the + device, and can be hard-wired here. + */ + link->conf.Attributes = 0; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Allocate space for private device-specific data */ + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) { + printk(KERN_ERR "airo_cs: no memory for new device\n"); + kfree (link); + return NULL; + } + memset(local, 0, sizeof(local_info_t)); + link->priv = local; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &airo_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != 0) { + cs_error(link->handle, RegisterClient, ret); + airo_detach(link); + return NULL; + } + + return link; +} /* airo_attach */ + +/*====================================================================== + + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. + + ======================================================================*/ + +static void airo_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DEBUG(0, "airo_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) break; + if (*linkp == NULL) + return; + + if (link->state & DEV_CONFIG) + airo_release(link); + + if ( ((local_info_t*)link->priv)->eth_dev ) { + stop_airo_card( ((local_info_t*)link->priv)->eth_dev, 0 ); + } + ((local_info_t*)link->priv)->eth_dev = NULL; + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + + + /* Unlink device structure, free pieces */ + *linkp = link->next; + if (link->priv) { + kfree(link->priv); + } + kfree(link); + +} /* airo_detach */ + +/*====================================================================== + + airo_config() is scheduled to run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + device available to the system. + + ======================================================================*/ + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +static void airo_config(dev_link_t *link) +{ + client_handle_t handle; + tuple_t tuple; + cisparse_t parse; + local_info_t *dev; + int last_fn, last_ret; + u_char buf[64]; + win_req_t req; + memreq_t map; + + handle = link->handle; + dev = link->priv; + + DEBUG(0, "airo_config(0x%p)\n", link); + + /* + This reads the card's CONFIG tuple to find its configuration + registers. + */ + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* + In this loop, we scan the CIS for configuration table entries, + each of which describes a valid card configuration, including + voltage, IO window, memory window, and interrupt settings. + + We make no assumptions about the card to be configured: we use + just the information available in the CIS. In an ideal world, + this would work for any PCMCIA card, but it requires a complete + and accurate CIS. In practice, a driver usually "knows" most of + these things without consulting the CIS, and most client drivers + will only use the CIS to fill in implementation-defined details. + */ + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t dflt = { 0 }; + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + if (pcmcia_get_tuple_data(handle, &tuple) != 0 || + pcmcia_parse_tuple(handle, &tuple, &parse) != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; + if (cfg->index == 0) goto next_entry; + link->conf.ConfigIndex = cfg->index; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000; + + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + link->io.Attributes2 = link->io.Attributes1; + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + + /* + Now set up a common memory window, if needed. There is room + in the dev_link_t structure for one memory window handle, + but if the base addresses need to be saved, or if multiple + windows are needed, the info should go in the private data + structure for this device. + + Note that the memory window base is a physical address, and + needs to be mapped to virtual space with ioremap() before it + is used. + */ + if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; + req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + req.Base = mem->win[0].host_addr; + req.Size = mem->win[0].len; + req.AccessSpeed = 0; + if (pcmcia_request_window(&link->handle, &req, &link->win) != 0) + goto next_entry; + map.Page = 0; map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(link->win, &map) != 0) + goto next_entry; + } + /* If we got this far, we're cool! */ + break; + + next_entry: + CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple)); + } + + /* + Allocate an interrupt line. Note that this does not assign a + handler to the interrupt, unless the 'Handler' member of the + irq structure is initialized. + */ + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + + /* + This actually configures the PCMCIA socket -- setting up + the I/O windows and the interrupt mapping, and putting the + card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); + ((local_info_t*)link->priv)->eth_dev = + init_airo_card( link->irq.AssignedIRQ, + link->io.BasePort1, 1, &handle_to_dev(handle) ); + if (!((local_info_t*)link->priv)->eth_dev) goto cs_failed; + + /* + At this point, the dev_node_t structure(s) need to be + initialized and arranged in a linked list at link->dev. + */ + strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name ); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + /* Finally, report what we've done */ + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev->node.dev_name, link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + if (link->conf.Attributes & CONF_ENABLE_IRQ) + printk(", irq %d", link->irq.AssignedIRQ); + if (link->io.NumPorts1) + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + if (link->io.NumPorts2) + printk(" & 0x%04x-0x%04x", link->io.BasePort2, + link->io.BasePort2+link->io.NumPorts2-1); + if (link->win) + printk(", mem 0x%06lx-0x%06lx", req.Base, + req.Base+req.Size-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + airo_release(link); + +} /* airo_config */ + +/*====================================================================== + + After a card is removed, airo_release() will unregister the + device, and release the PCMCIA configuration. If the device is + still open, this will be postponed until it is closed. + + ======================================================================*/ + +static void airo_release(dev_link_t *link) +{ + DEBUG(0, "airo_release(0x%p)\n", link); + + /* Unlink the device chain */ + link->dev = NULL; + + /* + In a normal driver, additional code may be needed to release + other kernel data structures associated with this device. + */ + + /* Don't bother checking to see if these succeed or not */ + if (link->win) + pcmcia_release_window(link->win); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; +} + +/*====================================================================== + + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. + + When a CARD_REMOVAL event is received, we immediately set a + private flag to block future accesses to this device. All the + functions that actually access the device should check this flag + to make sure the card is still present. + + ======================================================================*/ + +static int airo_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + local_info_t *local = link->priv; + + DEBUG(1, "airo_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + netif_device_detach(local->eth_dev); + airo_release(link); + } + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + airo_config(link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) { + netif_device_detach(local->eth_dev); + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, &link->conf); + reset_airo_card(local->eth_dev); + netif_device_attach(local->eth_dev); + } + break; + } + return 0; +} /* airo_event */ + +static struct pcmcia_driver airo_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "airo_cs", + }, + .attach = airo_attach, + .detach = airo_detach, +}; + +static int airo_cs_init(void) +{ + return pcmcia_register_driver(&airo_driver); +} + +static void airo_cs_cleanup(void) +{ + pcmcia_unregister_driver(&airo_driver); + BUG_ON(dev_list != NULL); +} + +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + In addition: + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +module_init(airo_cs_init); +module_exit(airo_cs_cleanup); diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c new file mode 100644 index 00000000000..a1dc2a19608 --- /dev/null +++ b/drivers/net/wireless/airport.c @@ -0,0 +1,304 @@ +/* airport.c + * + * A driver for "Hermes" chipset based Apple Airport wireless + * card. + * + * Copyright notice & release notes in file orinoco.c + * + * Note specific to airport stub: + * + * 0.05 : first version of the new split driver + * 0.06 : fix possible hang on powerup, add sleep support + */ + +#define DRIVER_NAME "airport" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> + +#include <asm/io.h> +#include <asm/system.h> +#include <asm/current.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/irq.h> +#include <asm/uaccess.h> + +#include "orinoco.h" + +#define AIRPORT_IO_LEN (0x1000) /* one page */ + +struct airport { + struct macio_dev *mdev; + void __iomem *vaddr; + int irq_requested; + int ndev_registered; +}; + +static int +airport_suspend(struct macio_dev *mdev, u32 state) +{ + struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); + + err = orinoco_lock(priv, &flags); + if (err) { + printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", + dev->name); + return 0; + } + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + + priv->hw_unavailable++; + + orinoco_unlock(priv, &flags); + + disable_irq(dev->irq); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + + return 0; +} + +static int +airport_resume(struct macio_dev *mdev) +{ + struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + msleep(200); + + enable_irq(dev->irq); + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n", + dev->name, err); + return 0; + } + + spin_lock_irqsave(&priv->lock, flags); + + netif_device_attach(dev); + + priv->hw_unavailable--; + + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n", + dev->name, err); + } + + + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int +airport_detach(struct macio_dev *mdev) +{ + struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); + struct orinoco_private *priv = netdev_priv(dev); + struct airport *card = priv->card; + + if (card->ndev_registered) + unregister_netdev(dev); + card->ndev_registered = 0; + + if (card->irq_requested) + free_irq(dev->irq, dev); + card->irq_requested = 0; + + if (card->vaddr) + iounmap(card->vaddr); + card->vaddr = NULL; + + macio_release_resource(mdev, 0); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + ssleep(1); + + macio_set_drvdata(mdev, NULL); + free_orinocodev(dev); + + return 0; +} + +static int airport_hard_reset(struct orinoco_private *priv) +{ + /* It would be nice to power cycle the Airport for a real hard + * reset, but for some reason although it appears to + * re-initialize properly, it falls in a screaming heap + * shortly afterwards. */ +#if 0 + struct net_device *dev = priv->ndev; + struct airport *card = priv->card; + + /* Vitally important. If we don't do this it seems we get an + * interrupt somewhere during the power cycle, since + * hw_unavailable is already set it doesn't get ACKed, we get + * into an interrupt loop and the the PMU decides to turn us + * off. */ + disable_irq(dev->irq); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0); + ssleep(1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1); + ssleep(1); + + enable_irq(dev->irq); + ssleep(1); +#endif + + return 0; +} + +static int +airport_attach(struct macio_dev *mdev, const struct of_match *match) +{ + struct orinoco_private *priv; + struct net_device *dev; + struct airport *card; + unsigned long phys_addr; + hermes_t *hw; + + if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { + printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); + return -ENODEV; + } + + /* Allocate space for private device-specific data */ + dev = alloc_orinocodev(sizeof(*card), airport_hard_reset); + if (! dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + return -ENODEV; + } + priv = netdev_priv(dev); + card = priv->card; + + hw = &priv->hw; + card->mdev = mdev; + + if (macio_request_resource(mdev, 0, "airport")) { + printk(KERN_ERR PFX "can't request IO resource !\n"); + free_orinocodev(dev); + return -EBUSY; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &mdev->ofdev.dev); + + macio_set_drvdata(mdev, dev); + + /* Setup interrupts & base address */ + dev->irq = macio_irq(mdev, 0); + phys_addr = macio_resource_start(mdev, 0); /* Physical address */ + printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); + dev->base_addr = phys_addr; + card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); + if (!card->vaddr) { + printk(KERN_ERR PFX "ioremap() failed\n"); + goto failed; + } + + hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); + + /* Power up card */ + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + ssleep(1); + + /* Reset it before we get the interrupt */ + hermes_init(hw); + + if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) { + printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq); + goto failed; + } + card->irq_requested = 1; + + /* Tell the stack we exist */ + if (register_netdev(dev) != 0) { + printk(KERN_ERR PFX "register_netdev() failed\n"); + goto failed; + } + printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name); + card->ndev_registered = 1; + return 0; + failed: + airport_detach(mdev); + return -ENODEV; +} /* airport_attach */ + + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)"; +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); +MODULE_LICENSE("Dual MPL/GPL"); + +static struct of_match airport_match[] = +{ + { + .name = "radio", + .type = OF_ANY_MATCH, + .compatible = OF_ANY_MATCH + }, + {}, +}; + +static struct macio_driver airport_driver = +{ + .name = DRIVER_NAME, + .match_table = airport_match, + .probe = airport_attach, + .remove = airport_detach, + .suspend = airport_suspend, + .resume = airport_resume, +}; + +static int __init +init_airport(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return macio_register_driver(&airport_driver); +} + +static void __exit +exit_airport(void) +{ + return macio_unregister_driver(&airport_driver); +} + +module_init(init_airport); +module_exit(exit_airport); diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c new file mode 100644 index 00000000000..4f304c6e693 --- /dev/null +++ b/drivers/net/wireless/arlan-main.c @@ -0,0 +1,1896 @@ +/* + * Copyright (C) 1997 Cullen Jennings + * Copyright (C) 1998 Elmer Joandiu, elmer@ylenurme.ee + * GNU General Public License applies + * This module provides support for the Arlan 655 card made by Aironet + */ + +#include <linux/config.h> +#include "arlan.h" + +#if BITS_PER_LONG != 32 +# error FIXME: this driver requires a 32-bit platform +#endif + +static const char *arlan_version = "C.Jennigs 97 & Elmer.Joandi@ut.ee Oct'98, http://www.ylenurme.ee/~elmer/655/"; + +struct net_device *arlan_device[MAX_ARLANS]; + +static int SID = SIDUNKNOWN; +static int radioNodeId = radioNodeIdUNKNOWN; +static char encryptionKey[12] = {'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h'}; +int arlan_debug = debugUNKNOWN; +static int spreadingCode = spreadingCodeUNKNOWN; +static int channelNumber = channelNumberUNKNOWN; +static int channelSet = channelSetUNKNOWN; +static int systemId = systemIdUNKNOWN; +static int registrationMode = registrationModeUNKNOWN; +static int keyStart; +static int tx_delay_ms; +static int retries = 5; +static int tx_queue_len = 1; +static int arlan_EEPROM_bad; + +#ifdef ARLAN_DEBUGGING + +static int arlan_entry_debug; +static int arlan_exit_debug; +static int testMemory = testMemoryUNKNOWN; +static int irq = irqUNKNOWN; +static int txScrambled = 1; +static int mdebug; + +module_param(irq, int, 0); +module_param(mdebug, int, 0); +module_param(testMemory, int, 0); +module_param(arlan_entry_debug, int, 0); +module_param(arlan_exit_debug, int, 0); +module_param(txScrambled, int, 0); +MODULE_PARM_DESC(irq, "(unused)"); +MODULE_PARM_DESC(testMemory, "(unused)"); +MODULE_PARM_DESC(mdebug, "Arlan multicast debugging (0-1)"); +#endif + +module_param(arlan_debug, int, 0); +module_param(spreadingCode, int, 0); +module_param(channelNumber, int, 0); +module_param(channelSet, int, 0); +module_param(systemId, int, 0); +module_param(registrationMode, int, 0); +module_param(radioNodeId, int, 0); +module_param(SID, int, 0); +module_param(keyStart, int, 0); +module_param(tx_delay_ms, int, 0); +module_param(retries, int, 0); +module_param(tx_queue_len, int, 0); +module_param(arlan_EEPROM_bad, int, 0); +MODULE_PARM_DESC(arlan_debug, "Arlan debug enable (0-1)"); +MODULE_PARM_DESC(retries, "Arlan maximum packet retransmisions"); +#ifdef ARLAN_ENTRY_EXIT_DEBUGGING +MODULE_PARM_DESC(arlan_entry_debug, "Arlan driver function entry debugging"); +MODULE_PARM_DESC(arlan_exit_debug, "Arlan driver function exit debugging"); +MODULE_PARM_DESC(arlan_entry_and_exit_debug, "Arlan driver function entry and exit debugging"); +#else +MODULE_PARM_DESC(arlan_entry_debug, "(ignored)"); +MODULE_PARM_DESC(arlan_exit_debug, "(ignored)"); +MODULE_PARM_DESC(arlan_entry_and_exit_debug, "(ignored)"); +#endif + +struct arlan_conf_stru arlan_conf[MAX_ARLANS]; +static int arlans_found; + +static int arlan_open(struct net_device *dev); +static int arlan_tx(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t arlan_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static int arlan_close(struct net_device *dev); +static struct net_device_stats * + arlan_statistics (struct net_device *dev); +static void arlan_set_multicast (struct net_device *dev); +static int arlan_hw_tx (struct net_device* dev, char *buf, int length ); +static int arlan_hw_config (struct net_device * dev); +static void arlan_tx_done_interrupt (struct net_device * dev, int status); +static void arlan_rx_interrupt (struct net_device * dev, u_char rxStatus, u_short, u_short); +static void arlan_process_interrupt (struct net_device * dev); +static void arlan_tx_timeout (struct net_device *dev); + +static inline long us2ticks(int us) +{ + return us * (1000000 / HZ); +} + + +#ifdef ARLAN_ENTRY_EXIT_DEBUGGING +#define ARLAN_DEBUG_ENTRY(name) \ + {\ + struct timeval timev;\ + do_gettimeofday(&timev);\ + if (arlan_entry_debug || arlan_entry_and_exit_debug)\ + printk("--->>>" name " %ld " "\n",((long int) timev.tv_sec * 1000000 + timev.tv_usec));\ + } +#define ARLAN_DEBUG_EXIT(name) \ + {\ + struct timeval timev;\ + do_gettimeofday(&timev);\ + if (arlan_exit_debug || arlan_entry_and_exit_debug)\ + printk("<<<---" name " %ld " "\n",((long int) timev.tv_sec * 1000000 + timev.tv_usec) );\ + } +#else +#define ARLAN_DEBUG_ENTRY(name) +#define ARLAN_DEBUG_EXIT(name) +#endif + + +#define arlan_interrupt_ack(dev)\ + clearClearInterrupt(dev);\ + setClearInterrupt(dev); + +static inline int arlan_drop_tx(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + priv->stats.tx_errors++; + if (priv->Conf->tx_delay_ms) + { + priv->tx_done_delayed = jiffies + priv->Conf->tx_delay_ms * HZ / 1000 + 1; + } + else + { + priv->waiting_command_mask &= ~ARLAN_COMMAND_TX; + TXHEAD(dev).offset = 0; + TXTAIL(dev).offset = 0; + priv->txLast = 0; + priv->bad = 0; + if (!priv->under_reset && !priv->under_config) + netif_wake_queue (dev); + } + return 1; +} + + +int arlan_command(struct net_device *dev, int command_p) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + struct arlan_conf_stru *conf = priv->Conf; + int udelayed = 0; + int i = 0; + unsigned long flags; + + ARLAN_DEBUG_ENTRY("arlan_command"); + + if (priv->card_polling_interval) + priv->card_polling_interval = 1; + + if (arlan_debug & ARLAN_DEBUG_CHAIN_LOCKS) + printk(KERN_DEBUG "arlan_command, %lx commandByte %x waiting %lx incoming %x \n", + jiffies, READSHMB(arlan->commandByte), + priv->waiting_command_mask, command_p); + + priv->waiting_command_mask |= command_p; + + if (priv->waiting_command_mask & ARLAN_COMMAND_RESET) + if (time_after(jiffies, priv->lastReset + 5 * HZ)) + priv->waiting_command_mask &= ~ARLAN_COMMAND_RESET; + + if (priv->waiting_command_mask & ARLAN_COMMAND_INT_ACK) + { + arlan_interrupt_ack(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_ACK; + } + if (priv->waiting_command_mask & ARLAN_COMMAND_INT_ENABLE) + { + setInterruptEnable(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_ENABLE; + } + + /* Card access serializing lock */ + spin_lock_irqsave(&priv->lock, flags); + + /* Check cards status and waiting */ + + if (priv->waiting_command_mask & (ARLAN_COMMAND_LONG_WAIT_NOW | ARLAN_COMMAND_WAIT_NOW)) + { + while (priv->waiting_command_mask & (ARLAN_COMMAND_LONG_WAIT_NOW | ARLAN_COMMAND_WAIT_NOW)) + { + if (READSHMB(arlan->resetFlag) || + READSHMB(arlan->commandByte)) /* || + (readControlRegister(dev) & ARLAN_ACCESS)) + */ + udelay(40); + else + priv->waiting_command_mask &= ~(ARLAN_COMMAND_LONG_WAIT_NOW | ARLAN_COMMAND_WAIT_NOW); + + udelayed++; + + if (priv->waiting_command_mask & ARLAN_COMMAND_LONG_WAIT_NOW) + { + if (udelayed * 40 > 1000000) + { + printk(KERN_ERR "%s long wait too long \n", dev->name); + priv->waiting_command_mask |= ARLAN_COMMAND_RESET; + break; + } + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_WAIT_NOW) + { + if (udelayed * 40 > 1000) + { + printk(KERN_ERR "%s short wait too long \n", dev->name); + goto bad_end; + } + } + } + } + else + { + i = 0; + while ((READSHMB(arlan->resetFlag) || + READSHMB(arlan->commandByte)) && + conf->pre_Command_Wait > (i++) * 10) + udelay(10); + + + if ((READSHMB(arlan->resetFlag) || + READSHMB(arlan->commandByte)) && + !(priv->waiting_command_mask & ARLAN_COMMAND_RESET)) + { + goto card_busy_end; + } + } + if (priv->waiting_command_mask & ARLAN_COMMAND_RESET) + priv->under_reset = 1; + if (priv->waiting_command_mask & ARLAN_COMMAND_CONF) + priv->under_config = 1; + + /* Issuing command */ + arlan_lock_card_access(dev); + if (priv->waiting_command_mask & ARLAN_COMMAND_POWERUP) + { + // if (readControlRegister(dev) & (ARLAN_ACCESS && ARLAN_POWER)) + setPowerOn(dev); + arlan_interrupt_lancpu(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_POWERUP; + priv->waiting_command_mask |= ARLAN_COMMAND_RESET; + priv->card_polling_interval = HZ / 10; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_ACTIVATE) + { + WRITESHMB(arlan->commandByte, ARLAN_COM_ACTIVATE); + arlan_interrupt_lancpu(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_ACTIVATE; + priv->card_polling_interval = HZ / 10; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_RX_ABORT) + { + if (priv->rx_command_given) + { + WRITESHMB(arlan->commandByte, ARLAN_COM_RX_ABORT); + arlan_interrupt_lancpu(dev); + priv->rx_command_given = 0; + } + priv->waiting_command_mask &= ~ARLAN_COMMAND_RX_ABORT; + priv->card_polling_interval = 1; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_TX_ABORT) + { + if (priv->tx_command_given) + { + WRITESHMB(arlan->commandByte, ARLAN_COM_TX_ABORT); + arlan_interrupt_lancpu(dev); + priv->tx_command_given = 0; + } + priv->waiting_command_mask &= ~ARLAN_COMMAND_TX_ABORT; + priv->card_polling_interval = 1; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_RESET) + { + priv->under_reset=1; + netif_stop_queue (dev); + + arlan_drop_tx(dev); + if (priv->tx_command_given || priv->rx_command_given) + { + printk(KERN_ERR "%s: Reset under tx or rx command \n", dev->name); + } + netif_stop_queue (dev); + if (arlan_debug & ARLAN_DEBUG_RESET) + printk(KERN_ERR "%s: Doing chip reset\n", dev->name); + priv->lastReset = jiffies; + WRITESHM(arlan->commandByte, 0, u_char); + /* hold card in reset state */ + setHardwareReset(dev); + /* set reset flag and then release reset */ + WRITESHM(arlan->resetFlag, 0xff, u_char); + clearChannelAttention(dev); + clearHardwareReset(dev); + priv->card_polling_interval = HZ / 4; + priv->waiting_command_mask &= ~ARLAN_COMMAND_RESET; + priv->waiting_command_mask |= ARLAN_COMMAND_INT_RACK; +// priv->waiting_command_mask |= ARLAN_COMMAND_INT_RENABLE; +// priv->waiting_command_mask |= ARLAN_COMMAND_RX; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_INT_RACK) + { + clearHardwareReset(dev); + clearClearInterrupt(dev); + setClearInterrupt(dev); + setInterruptEnable(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_RACK; + priv->waiting_command_mask |= ARLAN_COMMAND_CONF; + priv->under_config = 1; + priv->under_reset = 0; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_INT_RENABLE) + { + setInterruptEnable(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_RENABLE; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_CONF) + { + if (priv->tx_command_given || priv->rx_command_given) + { + printk(KERN_ERR "%s: Reset under tx or rx command \n", dev->name); + } + arlan_drop_tx(dev); + setInterruptEnable(dev); + arlan_hw_config(dev); + arlan_interrupt_lancpu(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_CONF; + priv->card_polling_interval = HZ / 10; +// priv->waiting_command_mask |= ARLAN_COMMAND_INT_RACK; +// priv->waiting_command_mask |= ARLAN_COMMAND_INT_ENABLE; + priv->waiting_command_mask |= ARLAN_COMMAND_CONF_WAIT; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_CONF_WAIT) + { + if (READSHMB(arlan->configuredStatusFlag) != 0 && + READSHMB(arlan->diagnosticInfo) == 0xff) + { + priv->waiting_command_mask &= ~ARLAN_COMMAND_CONF_WAIT; + priv->waiting_command_mask |= ARLAN_COMMAND_RX; + priv->waiting_command_mask |= ARLAN_COMMAND_TBUSY_CLEAR; + priv->card_polling_interval = HZ / 10; + priv->tx_command_given = 0; + priv->under_config = 0; + } + else + { + priv->card_polling_interval = 1; + if (arlan_debug & ARLAN_DEBUG_TIMING) + printk(KERN_ERR "configure delayed \n"); + } + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_RX) + { + if (!registrationBad(dev)) + { + setInterruptEnable(dev); + memset_io(arlan->commandParameter, 0, 0xf); + WRITESHMB(arlan->commandByte, ARLAN_COM_INT | ARLAN_COM_RX_ENABLE); + WRITESHMB(arlan->commandParameter[0], conf->rxParameter); + arlan_interrupt_lancpu(dev); + priv->rx_command_given = 0; // mnjah, bad + priv->waiting_command_mask &= ~ARLAN_COMMAND_RX; + priv->card_polling_interval = 1; + } + else + priv->card_polling_interval = 2; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_TBUSY_CLEAR) + { + if ( !registrationBad(dev) && + (netif_queue_stopped(dev) || !netif_running(dev)) ) + { + priv->waiting_command_mask &= ~ARLAN_COMMAND_TBUSY_CLEAR; + netif_wake_queue (dev); + } + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_TX) + { + if (!test_and_set_bit(0, (void *) &priv->tx_command_given)) + { + if (time_after(jiffies, + priv->tx_last_sent + us2ticks(conf->rx_tweak1)) + || time_before(jiffies, + priv->last_rx_int_ack_time + us2ticks(conf->rx_tweak2))) + { + setInterruptEnable(dev); + memset_io(arlan->commandParameter, 0, 0xf); + WRITESHMB(arlan->commandByte, ARLAN_COM_TX_ENABLE | ARLAN_COM_INT); + memcpy_toio(arlan->commandParameter, &TXLAST(dev), 14); +// for ( i=1 ; i < 15 ; i++) printk("%02x:",READSHMB(arlan->commandParameter[i])); + priv->tx_last_sent = jiffies; + arlan_interrupt_lancpu(dev); + priv->tx_command_given = 1; + priv->waiting_command_mask &= ~ARLAN_COMMAND_TX; + priv->card_polling_interval = 1; + } + else + { + priv->tx_command_given = 0; + priv->card_polling_interval = 1; + } + } + else if (arlan_debug & ARLAN_DEBUG_CHAIN_LOCKS) + printk(KERN_ERR "tx command when tx chain locked \n"); + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_NOOPINT) + { + { + WRITESHMB(arlan->commandByte, ARLAN_COM_NOP | ARLAN_COM_INT); + } + arlan_interrupt_lancpu(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_NOOPINT; + priv->card_polling_interval = HZ / 3; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_NOOP) + { + WRITESHMB(arlan->commandByte, ARLAN_COM_NOP); + arlan_interrupt_lancpu(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_NOOP; + priv->card_polling_interval = HZ / 3; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_SLOW_POLL) + { + WRITESHMB(arlan->commandByte, ARLAN_COM_GOTO_SLOW_POLL); + arlan_interrupt_lancpu(dev); + priv->waiting_command_mask &= ~ARLAN_COMMAND_SLOW_POLL; + priv->card_polling_interval = HZ / 3; + } + else if (priv->waiting_command_mask & ARLAN_COMMAND_POWERDOWN) + { + setPowerOff(dev); + if (arlan_debug & ARLAN_DEBUG_CARD_STATE) + printk(KERN_WARNING "%s: Arlan Going Standby\n", dev->name); + priv->waiting_command_mask &= ~ARLAN_COMMAND_POWERDOWN; + priv->card_polling_interval = 3 * HZ; + } + arlan_unlock_card_access(dev); + for (i = 0; READSHMB(arlan->commandByte) && i < 20; i++) + udelay(10); + if (READSHMB(arlan->commandByte)) + if (arlan_debug & ARLAN_DEBUG_CARD_STATE) + printk(KERN_ERR "card busy leaving command %lx\n", priv->waiting_command_mask); + + spin_unlock_irqrestore(&priv->lock, flags); + ARLAN_DEBUG_EXIT("arlan_command"); + priv->last_command_buff_free_time = jiffies; + return 0; + +card_busy_end: + if (time_after(jiffies, priv->last_command_buff_free_time + HZ)) + priv->waiting_command_mask |= ARLAN_COMMAND_CLEAN_AND_RESET; + + if (arlan_debug & ARLAN_DEBUG_CARD_STATE) + printk(KERN_ERR "%s arlan_command card busy end \n", dev->name); + spin_unlock_irqrestore(&priv->lock, flags); + ARLAN_DEBUG_EXIT("arlan_command"); + return 1; + +bad_end: + printk(KERN_ERR "%s arlan_command bad end \n", dev->name); + + spin_unlock_irqrestore(&priv->lock, flags); + ARLAN_DEBUG_EXIT("arlan_command"); + + return -1; +} + +static inline void arlan_command_process(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + int times = 0; + while (priv->waiting_command_mask && times < 8) + { + if (priv->waiting_command_mask) + { + if (arlan_command(dev, 0)) + break; + times++; + } + /* if long command, we won't repeat trying */ ; + if (priv->card_polling_interval > 1) + break; + times++; + } +} + + +static inline void arlan_retransmit_now(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + + ARLAN_DEBUG_ENTRY("arlan_retransmit_now"); + if (TXLAST(dev).offset == 0) + { + if (TXHEAD(dev).offset) + { + priv->txLast = 0; + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_DEBUG "TX buff switch to head \n"); + + } + else if (TXTAIL(dev).offset) + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_DEBUG "TX buff switch to tail \n"); + priv->txLast = 1; + } + else + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_ERR "ReTransmit buff empty"); + netif_wake_queue (dev); + return; + + } + arlan_command(dev, ARLAN_COMMAND_TX); + + priv->Conf->driverRetransmissions++; + priv->retransmissions++; + + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk("Retransmit %d bytes \n", TXLAST(dev).length); + + ARLAN_DEBUG_EXIT("arlan_retransmit_now"); +} + + + +static void arlan_registration_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct arlan_private *priv = netdev_priv(dev); + int bh_mark_needed = 0; + int next_tick = 1; + long lostTime = ((long)jiffies - (long)priv->registrationLastSeen) + * (1000/HZ); + + if (registrationBad(dev)) + { + priv->registrationLostCount++; + if (lostTime > 7000 && lostTime < 7200) + { + printk(KERN_NOTICE "%s registration Lost \n", dev->name); + } + if (lostTime / priv->reRegisterExp > 2000) + arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_CONF); + if (lostTime / (priv->reRegisterExp) > 3500) + arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET); + if (priv->reRegisterExp < 400) + priv->reRegisterExp += 2; + if (lostTime > 7200) + { + next_tick = HZ; + arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET); + } + } + else + { + if (priv->Conf->registrationMode && lostTime > 10000 && + priv->registrationLostCount) + { + printk(KERN_NOTICE "%s registration is back after %ld milliseconds\n", + dev->name, lostTime); + } + priv->registrationLastSeen = jiffies; + priv->registrationLostCount = 0; + priv->reRegisterExp = 1; + if (!netif_running(dev) ) + netif_wake_queue(dev); + if (time_after(priv->tx_last_sent,priv->tx_last_cleared) && + time_after(jiffies, priv->tx_last_sent * 5*HZ) ){ + arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET); + priv->tx_last_cleared = jiffies; + } + } + + + if (!registrationBad(dev) && priv->ReTransmitRequested) + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk(KERN_ERR "Retransmit from timer \n"); + priv->ReTransmitRequested = 0; + arlan_retransmit_now(dev); + } + if (!registrationBad(dev) && + time_after(jiffies, priv->tx_done_delayed) && + priv->tx_done_delayed != 0) + { + TXLAST(dev).offset = 0; + if (priv->txLast) + priv->txLast = 0; + else if (TXTAIL(dev).offset) + priv->txLast = 1; + if (TXLAST(dev).offset) + { + arlan_retransmit_now(dev); + dev->trans_start = jiffies; + } + if (!(TXHEAD(dev).offset && TXTAIL(dev).offset)) + { + netif_wake_queue (dev); + } + priv->tx_done_delayed = 0; + bh_mark_needed = 1; + } + if (bh_mark_needed) + { + netif_wake_queue (dev); + } + arlan_process_interrupt(dev); + + if (next_tick < priv->card_polling_interval) + next_tick = priv->card_polling_interval; + + priv->timer.expires = jiffies + next_tick; + + add_timer(&priv->timer); +} + + +#ifdef ARLAN_DEBUGGING + +static void arlan_print_registers(struct net_device *dev, int line) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem *arlan = priv->card; + + u_char hostcpuLock, lancpuLock, controlRegister, cntrlRegImage, + txStatus, rxStatus, interruptInProgress, commandByte; + + + ARLAN_DEBUG_ENTRY("arlan_print_registers"); + READSHM(interruptInProgress, arlan->interruptInProgress, u_char); + READSHM(hostcpuLock, arlan->hostcpuLock, u_char); + READSHM(lancpuLock, arlan->lancpuLock, u_char); + READSHM(controlRegister, arlan->controlRegister, u_char); + READSHM(cntrlRegImage, arlan->cntrlRegImage, u_char); + READSHM(txStatus, arlan->txStatus, u_char); + READSHM(rxStatus, arlan->rxStatus, u_char); + READSHM(commandByte, arlan->commandByte, u_char); + + printk(KERN_WARNING "line %04d IP %02x HL %02x LL %02x CB %02x CR %02x CRI %02x TX %02x RX %02x\n", + line, interruptInProgress, hostcpuLock, lancpuLock, commandByte, + controlRegister, cntrlRegImage, txStatus, rxStatus); + + ARLAN_DEBUG_EXIT("arlan_print_registers"); +} +#endif + + +static int arlan_hw_tx(struct net_device *dev, char *buf, int length) +{ + int i; + + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + struct arlan_conf_stru *conf = priv->Conf; + + int tailStarts = 0x800; + int headEnds = 0x0; + + + ARLAN_DEBUG_ENTRY("arlan_hw_tx"); + if (TXHEAD(dev).offset) + headEnds = (((TXHEAD(dev).offset + TXHEAD(dev).length - offsetof(struct arlan_shmem, txBuffer)) / 64) + 1) * 64; + if (TXTAIL(dev).offset) + tailStarts = 0x800 - (((TXTAIL(dev).offset - offsetof(struct arlan_shmem, txBuffer)) / 64) + 2) * 64; + + + if (!TXHEAD(dev).offset && length < tailStarts) + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk(KERN_ERR "TXHEAD insert, tailStart %d\n", tailStarts); + + TXHEAD(dev).offset = + offsetof(struct arlan_shmem, txBuffer); + TXHEAD(dev).length = length - ARLAN_FAKE_HDR_LEN; + for (i = 0; i < 6; i++) + TXHEAD(dev).dest[i] = buf[i]; + TXHEAD(dev).clear = conf->txClear; + TXHEAD(dev).retries = conf->txRetries; /* 0 is use default */ + TXHEAD(dev).routing = conf->txRouting; + TXHEAD(dev).scrambled = conf->txScrambled; + memcpy_toio((char __iomem *)arlan + TXHEAD(dev).offset, buf + ARLAN_FAKE_HDR_LEN, TXHEAD(dev).length); + } + else if (!TXTAIL(dev).offset && length < (0x800 - headEnds)) + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk(KERN_ERR "TXTAIL insert, headEnd %d\n", headEnds); + + TXTAIL(dev).offset = + offsetof(struct arlan_shmem, txBuffer) + 0x800 - (length / 64 + 2) * 64; + TXTAIL(dev).length = length - ARLAN_FAKE_HDR_LEN; + for (i = 0; i < 6; i++) + TXTAIL(dev).dest[i] = buf[i]; + TXTAIL(dev).clear = conf->txClear; + TXTAIL(dev).retries = conf->txRetries; + TXTAIL(dev).routing = conf->txRouting; + TXTAIL(dev).scrambled = conf->txScrambled; + memcpy_toio(((char __iomem *)arlan + TXTAIL(dev).offset), buf + ARLAN_FAKE_HDR_LEN, TXTAIL(dev).length); + } + else + { + netif_stop_queue (dev); + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk(KERN_ERR "TX TAIL & HEAD full, return, tailStart %d headEnd %d\n", tailStarts, headEnds); + return -1; + } + priv->out_bytes += length; + priv->out_bytes10 += length; + if (conf->measure_rate < 1) + conf->measure_rate = 1; + if (time_after(jiffies, priv->out_time + conf->measure_rate * HZ)) + { + conf->out_speed = priv->out_bytes / conf->measure_rate; + priv->out_bytes = 0; + priv->out_time = jiffies; + } + if (time_after(jiffies, priv->out_time10 + conf->measure_rate * 10*HZ)) + { + conf->out_speed10 = priv->out_bytes10 / (10 * conf->measure_rate); + priv->out_bytes10 = 0; + priv->out_time10 = jiffies; + } + if (TXHEAD(dev).offset && TXTAIL(dev).offset) + { + netif_stop_queue (dev); + return 0; + } + else + netif_start_queue (dev); + + + IFDEBUG(ARLAN_DEBUG_HEADER_DUMP) + printk(KERN_WARNING "%s Transmit t %2x:%2x:%2x:%2x:%2x:%2x f %2x:%2x:%2x:%2x:%2x:%2x \n", dev->name, + (unsigned char) buf[0], (unsigned char) buf[1], (unsigned char) buf[2], (unsigned char) buf[3], + (unsigned char) buf[4], (unsigned char) buf[5], (unsigned char) buf[6], (unsigned char) buf[7], + (unsigned char) buf[8], (unsigned char) buf[9], (unsigned char) buf[10], (unsigned char) buf[11]); + + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_ERR "TX command prepare for buffer %d\n", priv->txLast); + + arlan_command(dev, ARLAN_COMMAND_TX); + + priv->tx_last_sent = jiffies; + + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk("%s TX Qued %d bytes \n", dev->name, length); + + ARLAN_DEBUG_EXIT("arlan_hw_tx"); + + return 0; +} + + +static int arlan_hw_config(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + struct arlan_conf_stru *conf = priv->Conf; + + ARLAN_DEBUG_ENTRY("arlan_hw_config"); + + printk(KERN_NOTICE "%s arlan configure called \n", dev->name); + if (arlan_EEPROM_bad) + printk(KERN_NOTICE "arlan configure with eeprom bad option \n"); + + + WRITESHM(arlan->spreadingCode, conf->spreadingCode, u_char); + WRITESHM(arlan->channelSet, conf->channelSet, u_char); + + if (arlan_EEPROM_bad) + WRITESHM(arlan->defaultChannelSet, conf->channelSet, u_char); + + WRITESHM(arlan->channelNumber, conf->channelNumber, u_char); + + WRITESHM(arlan->scramblingDisable, conf->scramblingDisable, u_char); + WRITESHM(arlan->txAttenuation, conf->txAttenuation, u_char); + + WRITESHM(arlan->systemId, conf->systemId, u_int); + + WRITESHM(arlan->maxRetries, conf->maxRetries, u_char); + WRITESHM(arlan->receiveMode, conf->receiveMode, u_char); + WRITESHM(arlan->priority, conf->priority, u_char); + WRITESHM(arlan->rootOrRepeater, conf->rootOrRepeater, u_char); + WRITESHM(arlan->SID, conf->SID, u_int); + + WRITESHM(arlan->registrationMode, conf->registrationMode, u_char); + + WRITESHM(arlan->registrationFill, conf->registrationFill, u_char); + WRITESHM(arlan->localTalkAddress, conf->localTalkAddress, u_char); + WRITESHM(arlan->codeFormat, conf->codeFormat, u_char); + WRITESHM(arlan->numChannels, conf->numChannels, u_char); + WRITESHM(arlan->channel1, conf->channel1, u_char); + WRITESHM(arlan->channel2, conf->channel2, u_char); + WRITESHM(arlan->channel3, conf->channel3, u_char); + WRITESHM(arlan->channel4, conf->channel4, u_char); + WRITESHM(arlan->radioNodeId, conf->radioNodeId, u_short); + WRITESHM(arlan->SID, conf->SID, u_int); + WRITESHM(arlan->waitTime, conf->waitTime, u_short); + WRITESHM(arlan->lParameter, conf->lParameter, u_short); + memcpy_toio(&(arlan->_15), &(conf->_15), 3); + WRITESHM(arlan->_15, conf->_15, u_short); + WRITESHM(arlan->headerSize, conf->headerSize, u_short); + if (arlan_EEPROM_bad) + WRITESHM(arlan->hardwareType, conf->hardwareType, u_char); + WRITESHM(arlan->radioType, conf->radioType, u_char); + if (arlan_EEPROM_bad) + WRITESHM(arlan->radioModule, conf->radioType, u_char); + + memcpy_toio(arlan->encryptionKey + keyStart, encryptionKey, 8); + memcpy_toio(arlan->name, conf->siteName, 16); + + WRITESHMB(arlan->commandByte, ARLAN_COM_INT | ARLAN_COM_CONF); /* do configure */ + memset_io(arlan->commandParameter, 0, 0xf); /* 0xf */ + memset_io(arlan->commandParameter + 1, 0, 2); + if (conf->writeEEPROM) + { + memset_io(arlan->commandParameter, conf->writeEEPROM, 1); +// conf->writeEEPROM=0; + } + if (conf->registrationMode && conf->registrationInterrupts) + memset_io(arlan->commandParameter + 3, 1, 1); + else + memset_io(arlan->commandParameter + 3, 0, 1); + + priv->irq_test_done = 0; + + if (conf->tx_queue_len) + dev->tx_queue_len = conf->tx_queue_len; + udelay(100); + + ARLAN_DEBUG_EXIT("arlan_hw_config"); + return 0; +} + + +static int arlan_read_card_configuration(struct net_device *dev) +{ + u_char tlx415; + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + struct arlan_conf_stru *conf = priv->Conf; + + ARLAN_DEBUG_ENTRY("arlan_read_card_configuration"); + + if (radioNodeId == radioNodeIdUNKNOWN) + { + READSHM(conf->radioNodeId, arlan->radioNodeId, u_short); + } + else + conf->radioNodeId = radioNodeId; + + if (SID == SIDUNKNOWN) + { + READSHM(conf->SID, arlan->SID, u_int); + } + else conf->SID = SID; + + if (spreadingCode == spreadingCodeUNKNOWN) + { + READSHM(conf->spreadingCode, arlan->spreadingCode, u_char); + } + else + conf->spreadingCode = spreadingCode; + + if (channelSet == channelSetUNKNOWN) + { + READSHM(conf->channelSet, arlan->channelSet, u_char); + } + else conf->channelSet = channelSet; + + if (channelNumber == channelNumberUNKNOWN) + { + READSHM(conf->channelNumber, arlan->channelNumber, u_char); + } + else conf->channelNumber = channelNumber; + + READSHM(conf->scramblingDisable, arlan->scramblingDisable, u_char); + READSHM(conf->txAttenuation, arlan->txAttenuation, u_char); + + if (systemId == systemIdUNKNOWN) + { + READSHM(conf->systemId, arlan->systemId, u_int); + } + else conf->systemId = systemId; + + READSHM(conf->maxDatagramSize, arlan->maxDatagramSize, u_short); + READSHM(conf->maxFrameSize, arlan->maxFrameSize, u_short); + READSHM(conf->maxRetries, arlan->maxRetries, u_char); + READSHM(conf->receiveMode, arlan->receiveMode, u_char); + READSHM(conf->priority, arlan->priority, u_char); + READSHM(conf->rootOrRepeater, arlan->rootOrRepeater, u_char); + + if (SID == SIDUNKNOWN) + { + READSHM(conf->SID, arlan->SID, u_int); + } + else conf->SID = SID; + + if (registrationMode == registrationModeUNKNOWN) + { + READSHM(conf->registrationMode, arlan->registrationMode, u_char); + } + else conf->registrationMode = registrationMode; + + READSHM(conf->registrationFill, arlan->registrationFill, u_char); + READSHM(conf->localTalkAddress, arlan->localTalkAddress, u_char); + READSHM(conf->codeFormat, arlan->codeFormat, u_char); + READSHM(conf->numChannels, arlan->numChannels, u_char); + READSHM(conf->channel1, arlan->channel1, u_char); + READSHM(conf->channel2, arlan->channel2, u_char); + READSHM(conf->channel3, arlan->channel3, u_char); + READSHM(conf->channel4, arlan->channel4, u_char); + READSHM(conf->waitTime, arlan->waitTime, u_short); + READSHM(conf->lParameter, arlan->lParameter, u_short); + READSHM(conf->_15, arlan->_15, u_short); + READSHM(conf->headerSize, arlan->headerSize, u_short); + READSHM(conf->hardwareType, arlan->hardwareType, u_char); + READSHM(conf->radioType, arlan->radioModule, u_char); + + if (conf->radioType == 0) + conf->radioType = 0xc; + + WRITESHM(arlan->configStatus, 0xA5, u_char); + READSHM(tlx415, arlan->configStatus, u_char); + + if (tlx415 != 0xA5) + printk(KERN_INFO "%s tlx415 chip \n", dev->name); + + conf->txClear = 0; + conf->txRetries = 1; + conf->txRouting = 1; + conf->txScrambled = 0; + conf->rxParameter = 1; + conf->txTimeoutMs = 4000; + conf->waitCardTimeout = 100000; + conf->receiveMode = ARLAN_RCV_CLEAN; + memcpy_fromio(conf->siteName, arlan->name, 16); + conf->siteName[16] = '\0'; + conf->retries = retries; + conf->tx_delay_ms = tx_delay_ms; + conf->ReTransmitPacketMaxSize = 200; + conf->waitReTransmitPacketMaxSize = 200; + conf->txAckTimeoutMs = 900; + conf->fastReTransCount = 3; + + ARLAN_DEBUG_EXIT("arlan_read_card_configuration"); + + return 0; +} + + +static int lastFoundAt = 0xbe000; + + +/* + * This is the real probe routine. Linux has a history of friendly device + * probes on the ISA bus. A good device probes avoids doing writes, and + * verifies that the correct device exists and functions. + */ +#define ARLAN_SHMEM_SIZE 0x2000 +static int __init arlan_check_fingerprint(unsigned long memaddr) +{ + static const char probeText[] = "TELESYSTEM SLW INC. ARLAN \0"; + volatile struct arlan_shmem __iomem *arlan = (struct arlan_shmem *) memaddr; + unsigned long paddr = virt_to_phys((void *) memaddr); + char tempBuf[49]; + + ARLAN_DEBUG_ENTRY("arlan_check_fingerprint"); + + if (!request_mem_region(paddr, ARLAN_SHMEM_SIZE, "arlan")) { + // printk(KERN_WARNING "arlan: memory region %lx excluded from probing \n",paddr); + return -ENODEV; + } + + memcpy_fromio(tempBuf, arlan->textRegion, 29); + tempBuf[30] = 0; + + /* check for card at this address */ + if (0 != strncmp(tempBuf, probeText, 29)){ + release_mem_region(paddr, ARLAN_SHMEM_SIZE); + return -ENODEV; + } + +// printk(KERN_INFO "arlan found at 0x%x \n",memaddr); + ARLAN_DEBUG_EXIT("arlan_check_fingerprint"); + + return 0; +} + +static int arlan_change_mtu(struct net_device *dev, int new_mtu) +{ + struct arlan_private *priv = netdev_priv(dev); + struct arlan_conf_stru *conf = priv->Conf; + + ARLAN_DEBUG_ENTRY("arlan_change_mtu"); + if (new_mtu > 2032) + return -EINVAL; + dev->mtu = new_mtu; + if (new_mtu < 256) + new_mtu = 256; /* cards book suggests 1600 */ + conf->maxDatagramSize = new_mtu; + conf->maxFrameSize = new_mtu + 48; + + arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_CONF); + printk(KERN_NOTICE "%s mtu changed to %d \n", dev->name, new_mtu); + + ARLAN_DEBUG_EXIT("arlan_change_mtu"); + + return 0; +} + +static int arlan_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + + ARLAN_DEBUG_ENTRY("arlan_mac_addr"); + return -EINVAL; + + if (!netif_running(dev)) + return -EBUSY; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + ARLAN_DEBUG_EXIT("arlan_mac_addr"); + return 0; +} + + + +static int __init arlan_setup_device(struct net_device *dev, int num) +{ + struct arlan_private *ap = netdev_priv(dev); + int err; + + ARLAN_DEBUG_ENTRY("arlan_setup_device"); + + ap->conf = (struct arlan_shmem *)(ap+1); + + dev->tx_queue_len = tx_queue_len; + dev->open = arlan_open; + dev->stop = arlan_close; + dev->hard_start_xmit = arlan_tx; + dev->get_stats = arlan_statistics; + dev->set_multicast_list = arlan_set_multicast; + dev->change_mtu = arlan_change_mtu; + dev->set_mac_address = arlan_mac_addr; + dev->tx_timeout = arlan_tx_timeout; + dev->watchdog_timeo = 3*HZ; + + ap->irq_test_done = 0; + ap->Conf = &arlan_conf[num]; + + ap->Conf->pre_Command_Wait = 40; + ap->Conf->rx_tweak1 = 30; + ap->Conf->rx_tweak2 = 0; + + + err = register_netdev(dev); + if (err) { + release_mem_region(virt_to_phys((void *) dev->mem_start), + ARLAN_SHMEM_SIZE); + free_netdev(dev); + return err; + } + arlan_device[num] = dev; + ARLAN_DEBUG_EXIT("arlan_setup_device"); + return 0; +} + +static int __init arlan_probe_here(struct net_device *dev, + unsigned long memaddr) +{ + struct arlan_private *ap = netdev_priv(dev); + + ARLAN_DEBUG_ENTRY("arlan_probe_here"); + + if (arlan_check_fingerprint(memaddr)) + return -ENODEV; + + printk(KERN_NOTICE "%s: Arlan found at %x, \n ", dev->name, + (int) virt_to_phys((void*)memaddr)); + + ap->card = (void *) memaddr; + dev->mem_start = memaddr; + dev->mem_end = memaddr + ARLAN_SHMEM_SIZE-1; + + if (dev->irq < 2) + { + READSHM(dev->irq, ap->card->irqLevel, u_char); + } else if (dev->irq == 2) + dev->irq = 9; + + arlan_read_card_configuration(dev); + + ARLAN_DEBUG_EXIT("arlan_probe_here"); + return 0; +} + + +static int arlan_open(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + int ret = 0; + + ARLAN_DEBUG_ENTRY("arlan_open"); + + ret = request_irq(dev->irq, &arlan_interrupt, 0, dev->name, dev); + if (ret) + { + printk(KERN_ERR "%s: unable to get IRQ %d .\n", + dev->name, dev->irq); + return ret; + } + + + priv->bad = 0; + priv->lastReset = 0; + priv->reset = 0; + memcpy_fromio(dev->dev_addr, arlan->lanCardNodeId, 6); + memset(dev->broadcast, 0xff, 6); + dev->tx_queue_len = tx_queue_len; + priv->interrupt_processing_active = 0; + spin_lock_init(&priv->lock); + + netif_start_queue (dev); + + priv->registrationLostCount = 0; + priv->registrationLastSeen = jiffies; + priv->txLast = 0; + priv->tx_command_given = 0; + priv->rx_command_given = 0; + + priv->reRegisterExp = 1; + priv->tx_last_sent = jiffies - 1; + priv->tx_last_cleared = jiffies; + priv->Conf->writeEEPROM = 0; + priv->Conf->registrationInterrupts = 1; + + init_timer(&priv->timer); + priv->timer.expires = jiffies + HZ / 10; + priv->timer.data = (unsigned long) dev; + priv->timer.function = &arlan_registration_timer; /* timer handler */ + + arlan_command(dev, ARLAN_COMMAND_POWERUP | ARLAN_COMMAND_LONG_WAIT_NOW); + mdelay(200); + add_timer(&priv->timer); + + ARLAN_DEBUG_EXIT("arlan_open"); + return 0; +} + + +static void arlan_tx_timeout (struct net_device *dev) +{ + printk(KERN_ERR "%s: arlan transmit timed out, kernel decided\n", dev->name); + /* Try to restart the adaptor. */ + arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET); + // dev->trans_start = jiffies; + // netif_start_queue (dev); +} + + +static int arlan_tx(struct sk_buff *skb, struct net_device *dev) +{ + short length; + unsigned char *buf; + + ARLAN_DEBUG_ENTRY("arlan_tx"); + + length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + buf = skb->data; + + if (length + 0x12 > 0x800) { + printk(KERN_ERR "TX RING overflow \n"); + netif_stop_queue (dev); + } + + if (arlan_hw_tx(dev, buf, length) == -1) + goto bad_end; + + dev->trans_start = jiffies; + + dev_kfree_skb(skb); + + arlan_process_interrupt(dev); + ARLAN_DEBUG_EXIT("arlan_tx"); + return 0; + +bad_end: + arlan_process_interrupt(dev); + netif_stop_queue (dev); + ARLAN_DEBUG_EXIT("arlan_tx"); + return 1; +} + + +static inline int DoNotReTransmitCrap(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + if (TXLAST(dev).length < priv->Conf->ReTransmitPacketMaxSize) + return 1; + return 0; + +} + +static inline int DoNotWaitReTransmitCrap(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + if (TXLAST(dev).length < priv->Conf->waitReTransmitPacketMaxSize) + return 1; + return 0; +} + +static inline void arlan_queue_retransmit(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + ARLAN_DEBUG_ENTRY("arlan_queue_retransmit"); + + if (DoNotWaitReTransmitCrap(dev)) + { + arlan_drop_tx(dev); + } else + priv->ReTransmitRequested++; + + ARLAN_DEBUG_EXIT("arlan_queue_retransmit"); +} + +static inline void RetryOrFail(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + ARLAN_DEBUG_ENTRY("RetryOrFail"); + + if (priv->retransmissions > priv->Conf->retries || + DoNotReTransmitCrap(dev)) + { + arlan_drop_tx(dev); + } + else if (priv->bad <= priv->Conf->fastReTransCount) + { + arlan_retransmit_now(dev); + } + else arlan_queue_retransmit(dev); + + ARLAN_DEBUG_EXIT("RetryOrFail"); +} + + +static void arlan_tx_done_interrupt(struct net_device *dev, int status) +{ + struct arlan_private *priv = netdev_priv(dev); + + ARLAN_DEBUG_ENTRY("arlan_tx_done_interrupt"); + + priv->tx_last_cleared = jiffies; + priv->tx_command_given = 0; + switch (status) + { + case 1: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit OK\n"); + priv->stats.tx_packets++; + priv->bad = 0; + priv->reset = 0; + priv->retransmissions = 0; + if (priv->Conf->tx_delay_ms) + { + priv->tx_done_delayed = jiffies + (priv->Conf->tx_delay_ms * HZ) / 1000 + 1; + } + else + { + TXLAST(dev).offset = 0; + if (priv->txLast) + priv->txLast = 0; + else if (TXTAIL(dev).offset) + priv->txLast = 1; + if (TXLAST(dev).offset) + { + arlan_retransmit_now(dev); + dev->trans_start = jiffies; + } + if (!TXHEAD(dev).offset || !TXTAIL(dev).offset) + { + netif_wake_queue (dev); + } + } + } + break; + + case 2: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit timed out\n"); + priv->bad += 1; + //arlan_queue_retransmit(dev); + RetryOrFail(dev); + } + break; + + case 3: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit max retries\n"); + priv->bad += 1; + priv->reset = 0; + //arlan_queue_retransmit(dev); + RetryOrFail(dev); + } + break; + + case 4: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit aborted\n"); + priv->bad += 1; + arlan_queue_retransmit(dev); + //RetryOrFail(dev); + } + break; + + case 5: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit not registered\n"); + priv->bad += 1; + //debug=101; + arlan_queue_retransmit(dev); + } + break; + + case 6: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit destination full\n"); + priv->bad += 1; + priv->reset = 0; + //arlan_drop_tx(dev); + arlan_queue_retransmit(dev); + } + break; + + case 7: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit unknown ack\n"); + priv->bad += 1; + priv->reset = 0; + arlan_queue_retransmit(dev); + } + break; + + case 8: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit dest mail box full\n"); + priv->bad += 1; + priv->reset = 0; + //arlan_drop_tx(dev); + arlan_queue_retransmit(dev); + } + break; + + case 9: + { + IFDEBUG(ARLAN_DEBUG_TX_CHAIN) + printk("arlan intr: transmit root dest not reg.\n"); + priv->bad += 1; + priv->reset = 1; + //arlan_drop_tx(dev); + arlan_queue_retransmit(dev); + } + break; + + default: + { + printk(KERN_ERR "arlan intr: transmit status unknown\n"); + priv->bad += 1; + priv->reset = 1; + arlan_drop_tx(dev); + } + } + + ARLAN_DEBUG_EXIT("arlan_tx_done_interrupt"); +} + + +static void arlan_rx_interrupt(struct net_device *dev, u_char rxStatus, u_short rxOffset, u_short pkt_len) +{ + char *skbtmp; + int i = 0; + + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + struct arlan_conf_stru *conf = priv->Conf; + + + ARLAN_DEBUG_ENTRY("arlan_rx_interrupt"); + // by spec, not WRITESHMB(arlan->rxStatus,0x00); + // prohibited here arlan_command(dev, ARLAN_COMMAND_RX); + + if (pkt_len < 10 || pkt_len > 2048) + { + printk(KERN_WARNING "%s: got too short or long packet, len %d \n", dev->name, pkt_len); + return; + } + if (rxOffset + pkt_len > 0x2000) + { + printk("%s: got too long packet, len %d offset %x\n", dev->name, pkt_len, rxOffset); + return; + } + priv->in_bytes += pkt_len; + priv->in_bytes10 += pkt_len; + if (conf->measure_rate < 1) + conf->measure_rate = 1; + if (time_after(jiffies, priv->in_time + conf->measure_rate * HZ)) + { + conf->in_speed = priv->in_bytes / conf->measure_rate; + priv->in_bytes = 0; + priv->in_time = jiffies; + } + if (time_after(jiffies, priv->in_time10 + conf->measure_rate * 10*HZ)) + { + conf->in_speed10 = priv->in_bytes10 / (10 * conf->measure_rate); + priv->in_bytes10 = 0; + priv->in_time10 = jiffies; + } + DEBUGSHM(1, "arlan rcv pkt rxStatus= %d ", arlan->rxStatus, u_char); + switch (rxStatus) + { + case 1: + case 2: + case 3: + { + /* Malloc up new buffer. */ + struct sk_buff *skb; + + DEBUGSHM(50, "arlan recv pkt offs=%d\n", arlan->rxOffset, u_short); + DEBUGSHM(1, "arlan rxFrmType = %d \n", arlan->rxFrmType, u_char); + DEBUGSHM(1, KERN_INFO "arlan rx scrambled = %d \n", arlan->scrambled, u_char); + + /* here we do multicast filtering to avoid slow 8-bit memcopy */ +#ifdef ARLAN_MULTICAST + if (!(dev->flags & IFF_ALLMULTI) && + !(dev->flags & IFF_PROMISC) && + dev->mc_list) + { + char hw_dst_addr[6]; + struct dev_mc_list *dmi = dev->mc_list; + int i; + + memcpy_fromio(hw_dst_addr, arlan->ultimateDestAddress, 6); + if (hw_dst_addr[0] == 0x01) + { + if (mdebug) + if (hw_dst_addr[1] == 0x00) + printk(KERN_ERR "%s mcast 0x0100 \n", dev->name); + else if (hw_dst_addr[1] == 0x40) + printk(KERN_ERR "%s m/bcast 0x0140 \n", dev->name); + while (dmi) + { if (dmi->dmi_addrlen == 6) + { + if (arlan_debug & ARLAN_DEBUG_HEADER_DUMP) + printk(KERN_ERR "%s mcl %2x:%2x:%2x:%2x:%2x:%2x \n", dev->name, + dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], + dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]); + for (i = 0; i < 6; i++) + if (dmi->dmi_addr[i] != hw_dst_addr[i]) + break; + if (i == 6) + break; + } + else + printk(KERN_ERR "%s: invalid multicast address length given.\n", dev->name); + dmi = dmi->next; + } + /* we reach here if multicast filtering is on and packet + * is multicast and not for receive */ + goto end_of_interrupt; + } + } +#endif // ARLAN_MULTICAST + /* multicast filtering ends here */ + pkt_len += ARLAN_FAKE_HDR_LEN; + + skb = dev_alloc_skb(pkt_len + 4); + if (skb == NULL) + { + printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name); + priv->stats.rx_dropped++; + break; + } + skb_reserve(skb, 2); + skb->dev = dev; + skbtmp = skb_put(skb, pkt_len); + + memcpy_fromio(skbtmp + ARLAN_FAKE_HDR_LEN, ((char __iomem *) arlan) + rxOffset, pkt_len - ARLAN_FAKE_HDR_LEN); + memcpy_fromio(skbtmp, arlan->ultimateDestAddress, 6); + memcpy_fromio(skbtmp + 6, arlan->rxSrc, 6); + WRITESHMB(arlan->rxStatus, 0x00); + arlan_command(dev, ARLAN_COMMAND_RX); + + IFDEBUG(ARLAN_DEBUG_HEADER_DUMP) + { + char immedDestAddress[6]; + char immedSrcAddress[6]; + memcpy_fromio(immedDestAddress, arlan->immedDestAddress, 6); + memcpy_fromio(immedSrcAddress, arlan->immedSrcAddress, 6); + + printk(KERN_WARNING "%s t %2x:%2x:%2x:%2x:%2x:%2x f %2x:%2x:%2x:%2x:%2x:%2x imd %2x:%2x:%2x:%2x:%2x:%2x ims %2x:%2x:%2x:%2x:%2x:%2x\n", dev->name, + (unsigned char) skbtmp[0], (unsigned char) skbtmp[1], (unsigned char) skbtmp[2], (unsigned char) skbtmp[3], + (unsigned char) skbtmp[4], (unsigned char) skbtmp[5], (unsigned char) skbtmp[6], (unsigned char) skbtmp[7], + (unsigned char) skbtmp[8], (unsigned char) skbtmp[9], (unsigned char) skbtmp[10], (unsigned char) skbtmp[11], + immedDestAddress[0], immedDestAddress[1], immedDestAddress[2], + immedDestAddress[3], immedDestAddress[4], immedDestAddress[5], + immedSrcAddress[0], immedSrcAddress[1], immedSrcAddress[2], + immedSrcAddress[3], immedSrcAddress[4], immedSrcAddress[5]); + } + skb->protocol = eth_type_trans(skb, dev); + IFDEBUG(ARLAN_DEBUG_HEADER_DUMP) + if (skb->protocol != 0x608 && skb->protocol != 0x8) + { + for (i = 0; i <= 22; i++) + printk("%02x:", (u_char) skbtmp[i + 12]); + printk(KERN_ERR "\n"); + printk(KERN_WARNING "arlan kernel pkt type trans %x \n", skb->protocol); + } + netif_rx(skb); + dev->last_rx = jiffies; + priv->stats.rx_packets++; + priv->stats.rx_bytes += pkt_len; + } + break; + + default: + printk(KERN_ERR "arlan intr: received unknown status\n"); + priv->stats.rx_crc_errors++; + break; + } + ARLAN_DEBUG_EXIT("arlan_rx_interrupt"); +} + +static void arlan_process_interrupt(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + u_char rxStatus = READSHMB(arlan->rxStatus); + u_char txStatus = READSHMB(arlan->txStatus); + u_short rxOffset = READSHMS(arlan->rxOffset); + u_short pkt_len = READSHMS(arlan->rxLength); + int interrupt_count = 0; + + ARLAN_DEBUG_ENTRY("arlan_process_interrupt"); + + if (test_and_set_bit(0, (void *) &priv->interrupt_processing_active)) + { + if (arlan_debug & ARLAN_DEBUG_CHAIN_LOCKS) + printk(KERN_ERR "interrupt chain reentering \n"); + goto end_int_process; + } + while ((rxStatus || txStatus || priv->interrupt_ack_requested) + && (interrupt_count < 5)) + { + if (rxStatus) + priv->last_rx_int_ack_time = jiffies; + + arlan_command(dev, ARLAN_COMMAND_INT_ACK); + arlan_command(dev, ARLAN_COMMAND_INT_ENABLE); + + IFDEBUG(ARLAN_DEBUG_INTERRUPT) + printk(KERN_ERR "%s: got IRQ rx %x tx %x comm %x rxOff %x rxLen %x \n", + dev->name, rxStatus, txStatus, READSHMB(arlan->commandByte), + rxOffset, pkt_len); + + if (rxStatus == 0 && txStatus == 0) + { + if (priv->irq_test_done) + { + if (!registrationBad(dev)) + IFDEBUG(ARLAN_DEBUG_INTERRUPT) printk(KERN_ERR "%s unknown interrupt(nop? regLost ?) reason tx %d rx %d ", + dev->name, txStatus, rxStatus); + } else { + IFDEBUG(ARLAN_DEBUG_INTERRUPT) + printk(KERN_INFO "%s irq $%d test OK \n", dev->name, dev->irq); + + } + priv->interrupt_ack_requested = 0; + goto ends; + } + if (txStatus != 0) + { + WRITESHMB(arlan->txStatus, 0x00); + arlan_tx_done_interrupt(dev, txStatus); + goto ends; + } + if (rxStatus == 1 || rxStatus == 2) + { /* a packet waiting */ + arlan_rx_interrupt(dev, rxStatus, rxOffset, pkt_len); + goto ends; + } + if (rxStatus > 2 && rxStatus < 0xff) + { + WRITESHMB(arlan->rxStatus, 0x00); + printk(KERN_ERR "%s unknown rxStatus reason tx %d rx %d ", + dev->name, txStatus, rxStatus); + goto ends; + } + if (rxStatus == 0xff) + { + WRITESHMB(arlan->rxStatus, 0x00); + arlan_command(dev, ARLAN_COMMAND_RX); + if (registrationBad(dev)) + netif_device_detach(dev); + if (!registrationBad(dev)) + { + priv->registrationLastSeen = jiffies; + if (!netif_queue_stopped(dev) && !priv->under_reset && !priv->under_config) + netif_wake_queue (dev); + } + goto ends; + } +ends: + + arlan_command_process(dev); + + rxStatus = READSHMB(arlan->rxStatus); + txStatus = READSHMB(arlan->txStatus); + rxOffset = READSHMS(arlan->rxOffset); + pkt_len = READSHMS(arlan->rxLength); + + + priv->irq_test_done = 1; + + interrupt_count++; + } + priv->interrupt_processing_active = 0; + +end_int_process: + arlan_command_process(dev); + + ARLAN_DEBUG_EXIT("arlan_process_interrupt"); + return; +} + +static irqreturn_t arlan_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + u_char rxStatus = READSHMB(arlan->rxStatus); + u_char txStatus = READSHMB(arlan->txStatus); + + ARLAN_DEBUG_ENTRY("arlan_interrupt"); + + + if (!rxStatus && !txStatus) + priv->interrupt_ack_requested++; + + arlan_process_interrupt(dev); + + priv->irq_test_done = 1; + + ARLAN_DEBUG_EXIT("arlan_interrupt"); + return IRQ_HANDLED; + +} + + +static int arlan_close(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + + ARLAN_DEBUG_ENTRY("arlan_close"); + + del_timer_sync(&priv->timer); + + arlan_command(dev, ARLAN_COMMAND_POWERDOWN); + + IFDEBUG(ARLAN_DEBUG_STARTUP) + printk(KERN_NOTICE "%s: Closing device\n", dev->name); + + netif_stop_queue(dev); + free_irq(dev->irq, dev); + + ARLAN_DEBUG_EXIT("arlan_close"); + return 0; +} + +#ifdef ARLAN_DEBUGGING +static long alignLong(volatile u_char * ptr) +{ + long ret; + memcpy_fromio(&ret, (void *) ptr, 4); + return ret; +} +#endif + +/* + * Get the current statistics. + * This may be called with the card open or closed. + */ + +static struct net_device_stats *arlan_statistics(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + + + ARLAN_DEBUG_ENTRY("arlan_statistics"); + + /* Update the statistics from the device registers. */ + + READSHM(priv->stats.collisions, arlan->numReTransmissions, u_int); + READSHM(priv->stats.rx_crc_errors, arlan->numCRCErrors, u_int); + READSHM(priv->stats.rx_dropped, arlan->numFramesDiscarded, u_int); + READSHM(priv->stats.rx_fifo_errors, arlan->numRXBufferOverflows, u_int); + READSHM(priv->stats.rx_frame_errors, arlan->numReceiveFramesLost, u_int); + READSHM(priv->stats.rx_over_errors, arlan->numRXOverruns, u_int); + READSHM(priv->stats.rx_packets, arlan->numDatagramsReceived, u_int); + READSHM(priv->stats.tx_aborted_errors, arlan->numAbortErrors, u_int); + READSHM(priv->stats.tx_carrier_errors, arlan->numStatusTimeouts, u_int); + READSHM(priv->stats.tx_dropped, arlan->numDatagramsDiscarded, u_int); + READSHM(priv->stats.tx_fifo_errors, arlan->numTXUnderruns, u_int); + READSHM(priv->stats.tx_packets, arlan->numDatagramsTransmitted, u_int); + READSHM(priv->stats.tx_window_errors, arlan->numHoldOffs, u_int); + + ARLAN_DEBUG_EXIT("arlan_statistics"); + + return &priv->stats; +} + + +static void arlan_set_multicast(struct net_device *dev) +{ + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + struct arlan_conf_stru *conf = priv->Conf; + int board_conf_needed = 0; + + + ARLAN_DEBUG_ENTRY("arlan_set_multicast"); + + if (dev->flags & IFF_PROMISC) + { + unsigned char recMode; + READSHM(recMode, arlan->receiveMode, u_char); + conf->receiveMode = (ARLAN_RCV_PROMISC | ARLAN_RCV_CONTROL); + if (conf->receiveMode != recMode) + board_conf_needed = 1; + } + else + { + /* turn off promiscuous mode */ + unsigned char recMode; + READSHM(recMode, arlan->receiveMode, u_char); + conf->receiveMode = ARLAN_RCV_CLEAN | ARLAN_RCV_CONTROL; + if (conf->receiveMode != recMode) + board_conf_needed = 1; + } + if (board_conf_needed) + arlan_command(dev, ARLAN_COMMAND_CONF); + + ARLAN_DEBUG_EXIT("arlan_set_multicast"); +} + + +struct net_device * __init arlan_probe(int unit) +{ + struct net_device *dev; + int err; + int m; + + ARLAN_DEBUG_ENTRY("arlan_probe"); + + if (arlans_found == MAX_ARLANS) + return ERR_PTR(-ENODEV); + + /* + * Reserve space for local data and a copy of the shared memory + * that is used by the /proc interface. + */ + dev = alloc_etherdev(sizeof(struct arlan_private) + + sizeof(struct arlan_shmem)); + if (!dev) + return ERR_PTR(-ENOMEM); + + SET_MODULE_OWNER(dev); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + + if (dev->mem_start) { + if (arlan_probe_here(dev, dev->mem_start) == 0) + goto found; + goto not_found; + } + + } + + + for (m = (int)phys_to_virt(lastFoundAt) + ARLAN_SHMEM_SIZE; + m <= (int)phys_to_virt(0xDE000); + m += ARLAN_SHMEM_SIZE) + { + if (arlan_probe_here(dev, m) == 0) + { + lastFoundAt = (int)virt_to_phys((void*)m); + goto found; + } + } + + if (lastFoundAt == 0xbe000) + printk(KERN_ERR "arlan: No Arlan devices found \n"); + + not_found: + free_netdev(dev); + return ERR_PTR(-ENODEV); + + found: + err = arlan_setup_device(dev, arlans_found); + if (err) + dev = ERR_PTR(err); + else if (!arlans_found++) + printk(KERN_INFO "Arlan driver %s\n", arlan_version); + + return dev; +} + +#ifdef MODULE +int init_module(void) +{ + int i = 0; + + ARLAN_DEBUG_ENTRY("init_module"); + + if (channelSet != channelSetUNKNOWN || channelNumber != channelNumberUNKNOWN || systemId != systemIdUNKNOWN) + return -EINVAL; + + for (i = 0; i < MAX_ARLANS; i++) { + struct net_device *dev = arlan_probe(i); + + if (IS_ERR(dev)) + return PTR_ERR(dev); + } + init_arlan_proc(); + printk(KERN_INFO "Arlan driver %s\n", arlan_version); + ARLAN_DEBUG_EXIT("init_module"); + return 0; +} + + +void cleanup_module(void) +{ + int i = 0; + struct net_device *dev; + + ARLAN_DEBUG_ENTRY("cleanup_module"); + + IFDEBUG(ARLAN_DEBUG_SHUTDOWN) + printk(KERN_INFO "arlan: unloading module\n"); + + cleanup_arlan_proc(); + + for (i = 0; i < MAX_ARLANS; i++) + { + dev = arlan_device[i]; + if (dev) { + arlan_command(dev, ARLAN_COMMAND_POWERDOWN ); + + unregister_netdev(dev); + release_mem_region(virt_to_phys((void *) dev->mem_start), + ARLAN_SHMEM_SIZE); + free_netdev(dev); + arlan_device[i] = NULL; + } + } + + ARLAN_DEBUG_EXIT("cleanup_module"); +} + + +#endif +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/net/wireless/arlan-proc.c new file mode 100644 index 00000000000..a2cca521f44 --- /dev/null +++ b/drivers/net/wireless/arlan-proc.c @@ -0,0 +1,1262 @@ +#include <linux/config.h> +#include "arlan.h" + +#include <linux/sysctl.h> + +#ifdef CONFIG_PROC_FS + +/* void enableReceive(struct net_device* dev); +*/ + + + +#define ARLAN_STR_SIZE 0x2ff0 +#define DEV_ARLAN_INFO 1 +#define DEV_ARLAN 1 +#define SARLG(type,var) {\ + pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n", #var, READSHMB(priva->card->var)); \ + } + +#define SARLBN(type,var,nn) {\ + pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x",#var);\ + for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\ + pos += sprintf(arlan_drive_info+pos, "\n"); \ + } + +#define SARLBNpln(type,var,nn) {\ + for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\ + } + +#define SARLSTR(var,nn) {\ + char tmpStr[400];\ + int tmpLn = nn;\ + if (nn > 399 ) tmpLn = 399; \ + memcpy(tmpStr,(char *) priva->conf->var,tmpLn);\ + tmpStr[tmpLn] = 0; \ + pos += sprintf(arlan_drive_info+pos, "%s\t=\t%s \n",#var,priva->conf->var);\ + } + +#define SARLUC(var) SARLG(u_char, var) +#define SARLUCN(var,nn) SARLBN(u_char,var, nn) +#define SARLUS(var) SARLG(u_short, var) +#define SARLUSN(var,nn) SARLBN(u_short,var, nn) +#define SARLUI(var) SARLG(u_int, var) + +#define SARLUSA(var) {\ + u_short tmpVar;\ + memcpy(&tmpVar, (short *) priva->conf->var,2); \ + pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\ +} + +#define SARLUIA(var) {\ + u_int tmpVar;\ + memcpy(&tmpVar, (int* )priva->conf->var,4); \ + pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\ +} + + +static const char *arlan_diagnostic_info_string(struct net_device *dev) +{ + + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + u_char diagnosticInfo; + + READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char); + + switch (diagnosticInfo) + { + case 0xFF: + return "Diagnostic info is OK"; + case 0xFE: + return "ERROR EPROM Checksum error "; + case 0xFD: + return "ERROR Local Ram Test Failed "; + case 0xFC: + return "ERROR SCC failure "; + case 0xFB: + return "ERROR BackBone failure "; + case 0xFA: + return "ERROR transceiver not found "; + case 0xF9: + return "ERROR no more address space "; + case 0xF8: + return "ERROR Checksum error "; + case 0xF7: + return "ERROR Missing SS Code"; + case 0xF6: + return "ERROR Invalid config format"; + case 0xF5: + return "ERROR Reserved errorcode F5"; + case 0xF4: + return "ERROR Invalid spreading code/channel number"; + case 0xF3: + return "ERROR Load Code Error"; + case 0xF2: + return "ERROR Reserver errorcode F2 "; + case 0xF1: + return "ERROR Invalid command receivec by LAN card "; + case 0xF0: + return "ERROR Invalid parameter found in command "; + case 0xEF: + return "ERROR On-chip timer failure "; + case 0xEE: + return "ERROR T410 timer failure "; + case 0xED: + return "ERROR Too Many TxEnable commands "; + case 0xEC: + return "ERROR EEPROM error on radio module "; + default: + return "ERROR unknown Diagnostic info reply code "; + } +} + +static const char *arlan_hardware_type_string(struct net_device *dev) +{ + u_char hardwareType; + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + + READSHM(hardwareType, arlan->hardwareType, u_char); + switch (hardwareType) + { + case 0x00: + return "type A450"; + case 0x01: + return "type A650 "; + case 0x04: + return "type TMA coproc"; + case 0x0D: + return "type A650E "; + case 0x18: + return "type TMA coproc Australian"; + case 0x19: + return "type A650A "; + case 0x26: + return "type TMA coproc European"; + case 0x2E: + return "type A655 "; + case 0x2F: + return "type A655A "; + case 0x30: + return "type A655E "; + case 0x0B: + return "type A670 "; + case 0x0C: + return "type A670E "; + case 0x2D: + return "type A670A "; + case 0x0F: + return "type A411T"; + case 0x16: + return "type A411TA"; + case 0x1B: + return "type A440T"; + case 0x1C: + return "type A412T"; + case 0x1E: + return "type A412TA"; + case 0x22: + return "type A411TE"; + case 0x24: + return "type A412TE"; + case 0x27: + return "type A671T "; + case 0x29: + return "type A671TA "; + case 0x2B: + return "type A671TE "; + case 0x31: + return "type A415T "; + case 0x33: + return "type A415TA "; + case 0x35: + return "type A415TE "; + case 0x37: + return "type A672"; + case 0x39: + return "type A672A "; + case 0x3B: + return "type A672T"; + case 0x6B: + return "type IC2200"; + default: + return "type A672T"; + } +} +#ifdef ARLAN_DEBUGGING +static void arlan_print_diagnostic_info(struct net_device *dev) +{ + int i; + u_char diagnosticInfo; + u_short diagnosticOffset; + u_char hardwareType; + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + + // ARLAN_DEBUG_ENTRY("arlan_print_diagnostic_info"); + + if (READSHMB(arlan->configuredStatusFlag) == 0) + printk("Arlan: Card NOT configured\n"); + else + printk("Arlan: Card is configured\n"); + + READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char); + READSHM(diagnosticOffset, arlan->diagnosticOffset, u_short); + + printk(KERN_INFO "%s\n", arlan_diagnostic_info_string(dev)); + + if (diagnosticInfo != 0xff) + printk("%s arlan: Diagnostic Offset %d \n", dev->name, diagnosticOffset); + + printk("arlan: LAN CODE ID = "); + for (i = 0; i < 6; i++) + DEBUGSHM(1, "%03d:", arlan->lanCardNodeId[i], u_char); + printk("\n"); + + printk("arlan: Arlan BroadCast address = "); + for (i = 0; i < 6; i++) + DEBUGSHM(1, "%03d:", arlan->broadcastAddress[i], u_char); + printk("\n"); + + READSHM(hardwareType, arlan->hardwareType, u_char); + printk(KERN_INFO "%s\n", arlan_hardware_type_string(dev)); + + + DEBUGSHM(1, "arlan: channelNumber=%d\n", arlan->channelNumber, u_char); + DEBUGSHM(1, "arlan: channelSet=%d\n", arlan->channelSet, u_char); + DEBUGSHM(1, "arlan: spreadingCode=%d\n", arlan->spreadingCode, u_char); + DEBUGSHM(1, "arlan: radioNodeId=%d\n", arlan->radioNodeId, u_short); + DEBUGSHM(1, "arlan: SID =%d\n", arlan->SID, u_short); + DEBUGSHM(1, "arlan: rxOffset=%d\n", arlan->rxOffset, u_short); + + DEBUGSHM(1, "arlan: registration mode is %d\n", arlan->registrationMode, u_char); + + printk("arlan: name= "); + IFDEBUG(1) + + for (i = 0; i < 16; i++) + { + char c; + READSHM(c, arlan->name[i], char); + if (c) + printk("%c", c); + } + printk("\n"); + +// ARLAN_DEBUG_EXIT("arlan_print_diagnostic_info"); + +} + + +/****************************** TEST MEMORY **************/ + +static int arlan_hw_test_memory(struct net_device *dev) +{ + u_char *ptr; + int i; + int memlen = sizeof(struct arlan_shmem) - 0xF; /* avoid control register */ + volatile char *arlan_mem = (char *) (dev->mem_start); + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + char pattern; + + ptr = NULL; + + /* hold card in reset state */ + setHardwareReset(dev); + + /* test memory */ + pattern = 0; + for (i = 0; i < memlen; i++) + WRITESHM(arlan_mem[i], ((u_char) pattern++), u_char); + + pattern = 0; + for (i = 0; i < memlen; i++) + { + char res; + READSHM(res, arlan_mem[i], char); + if (res != pattern++) + { + printk(KERN_ERR "Arlan driver memory test 1 failed \n"); + return -1; + } + } + + pattern = 0; + for (i = 0; i < memlen; i++) + WRITESHM(arlan_mem[i], ~(pattern++), char); + + pattern = 0; + for (i = 0; i < memlen; i++) + { + char res; + READSHM(res, arlan_mem[i], char); + if (res != ~(pattern++)) + { + printk(KERN_ERR "Arlan driver memory test 2 failed \n"); + return -1; + } + } + + /* zero memory */ + for (i = 0; i < memlen; i++) + WRITESHM(arlan_mem[i], 0x00, char); + + IFDEBUG(1) printk(KERN_INFO "Arlan: memory tests ok\n"); + + /* set reset flag and then release reset */ + WRITESHM(arlan->resetFlag, 0xff, u_char); + + clearChannelAttention(dev); + clearHardwareReset(dev); + + /* wait for reset flag to become zero, we'll wait for two seconds */ + if (arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW)) + { + printk(KERN_ERR "%s arlan: failed to come back from memory test\n", dev->name); + return -1; + } + return 0; +} + +static int arlan_setup_card_by_book(struct net_device *dev) +{ + u_char irqLevel, configuredStatusFlag; + struct arlan_private *priv = netdev_priv(dev); + volatile struct arlan_shmem __iomem *arlan = priv->card; + +// ARLAN_DEBUG_ENTRY("arlan_setup_card"); + + READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char); + + IFDEBUG(10) + if (configuredStatusFlag != 0) + IFDEBUG(10) printk("arlan: CARD IS CONFIGURED\n"); + else + IFDEBUG(10) printk("arlan: card is NOT configured\n"); + + if (testMemory || (READSHMB(arlan->diagnosticInfo) != 0xff)) + if (arlan_hw_test_memory(dev)) + return -1; + + DEBUGSHM(4, "arlan configuredStatus = %d \n", arlan->configuredStatusFlag, u_char); + DEBUGSHM(4, "arlan driver diagnostic: 0x%2x\n", arlan->diagnosticInfo, u_char); + + /* issue nop command - no interrupt */ + arlan_command(dev, ARLAN_COMMAND_NOOP); + if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0) + return -1; + + IFDEBUG(50) printk("1st Noop successfully executed !!\n"); + + /* try to turn on the arlan interrupts */ + clearClearInterrupt(dev); + setClearInterrupt(dev); + setInterruptEnable(dev); + + /* issue nop command - with interrupt */ + + arlan_command(dev, ARLAN_COMMAND_NOOPINT); + if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0) + return -1; + + + IFDEBUG(50) printk("2nd Noop successfully executed !!\n"); + + READSHM(irqLevel, arlan->irqLevel, u_char) + + if (irqLevel != dev->irq) + { + IFDEBUG(1) printk(KERN_WARNING "arlan dip switches set irq to %d\n", irqLevel); + printk(KERN_WARNING "device driver irq set to %d - does not match\n", dev->irq); + dev->irq = irqLevel; + } + else + IFDEBUG(2) printk("irq level is OK\n"); + + + IFDEBUG(3) arlan_print_diagnostic_info(dev); + + arlan_command(dev, ARLAN_COMMAND_CONF); + + READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char); + if (configuredStatusFlag == 0) + { + printk(KERN_WARNING "arlan configure failed\n"); + return -1; + } + arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW); + arlan_command(dev, ARLAN_COMMAND_RX); + arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW); + printk(KERN_NOTICE "%s: arlan driver version %s loaded\n", + dev->name, arlan_version); + +// ARLAN_DEBUG_EXIT("arlan_setup_card"); + + return 0; /* no errors */ +} +#endif + +#ifdef ARLAN_PROC_INTERFACE +#ifdef ARLAN_PROC_SHM_DUMP + +static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0"; + +static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int i; + int retv, pos, devnum; + struct arlan_private *priva = NULL; + struct net_device *dev; + pos = 0; + if (write) + { + printk("wrirte: "); + for (i = 0; i < 100; i++) + printk("adi %x \n", arlan_drive_info[i]); + } + if (ctl->procname == NULL || arlan_drive_info == NULL) + { + printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL \n at arlan module\n "); + return -1; + } + devnum = ctl->procname[5] - '0'; + if (devnum < 0 || devnum > MAX_ARLANS - 1) + { + printk(KERN_WARNING "too strange devnum in procfs parse\n "); + return -1; + } + else if (arlan_device[devnum] == NULL) + { + if (ctl->procname) + pos += sprintf(arlan_drive_info + pos, "\t%s\n\n", ctl->procname); + pos += sprintf(arlan_drive_info + pos, "No device found here \n"); + goto final; + } + else + priva = arlan_device[devnum]->priv; + + if (priva == NULL) + { + printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); + return -1; + } + dev = arlan_device[devnum]; + + memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); + + pos = sprintf(arlan_drive_info, "Arlan info \n"); + /* Header Signature */ + SARLSTR(textRegion, 48); + SARLUC(resetFlag); + pos += sprintf(arlan_drive_info + pos, "diagnosticInfo\t=\t%s \n", arlan_diagnostic_info_string(dev)); + SARLUC(diagnosticInfo); + SARLUS(diagnosticOffset); + SARLUCN(_1, 12); + SARLUCN(lanCardNodeId, 6); + SARLUCN(broadcastAddress, 6); + pos += sprintf(arlan_drive_info + pos, "hardwareType =\t %s \n", arlan_hardware_type_string(dev)); + SARLUC(hardwareType); + SARLUC(majorHardwareVersion); + SARLUC(minorHardwareVersion); + SARLUC(radioModule); + SARLUC(defaultChannelSet); + SARLUCN(_2, 47); + + /* Control/Status Block - 0x0080 */ + SARLUC(interruptInProgress); + SARLUC(cntrlRegImage); + + SARLUCN(_3, 14); + SARLUC(commandByte); + SARLUCN(commandParameter, 15); + + /* Receive Status - 0x00a0 */ + SARLUC(rxStatus); + SARLUC(rxFrmType); + SARLUS(rxOffset); + SARLUS(rxLength); + SARLUCN(rxSrc, 6); + SARLUC(rxBroadcastFlag); + SARLUC(rxQuality); + SARLUC(scrambled); + SARLUCN(_4, 1); + + /* Transmit Status - 0x00b0 */ + SARLUC(txStatus); + SARLUC(txAckQuality); + SARLUC(numRetries); + SARLUCN(_5, 14); + SARLUCN(registeredRouter, 6); + SARLUCN(backboneRouter, 6); + SARLUC(registrationStatus); + SARLUC(configuredStatusFlag); + SARLUCN(_6, 1); + SARLUCN(ultimateDestAddress, 6); + SARLUCN(immedDestAddress, 6); + SARLUCN(immedSrcAddress, 6); + SARLUS(rxSequenceNumber); + SARLUC(assignedLocaltalkAddress); + SARLUCN(_7, 27); + + /* System Parameter Block */ + + /* - Driver Parameters (Novell Specific) */ + + SARLUS(txTimeout); + SARLUS(transportTime); + SARLUCN(_8, 4); + + /* - Configuration Parameters */ + SARLUC(irqLevel); + SARLUC(spreadingCode); + SARLUC(channelSet); + SARLUC(channelNumber); + SARLUS(radioNodeId); + SARLUCN(_9, 2); + SARLUC(scramblingDisable); + SARLUC(radioType); + SARLUS(routerId); + SARLUCN(_10, 9); + SARLUC(txAttenuation); + SARLUIA(systemId); + SARLUS(globalChecksum); + SARLUCN(_11, 4); + SARLUS(maxDatagramSize); + SARLUS(maxFrameSize); + SARLUC(maxRetries); + SARLUC(receiveMode); + SARLUC(priority); + SARLUC(rootOrRepeater); + SARLUCN(specifiedRouter, 6); + SARLUS(fastPollPeriod); + SARLUC(pollDecay); + SARLUSA(fastPollDelay); + SARLUC(arlThreshold); + SARLUC(arlDecay); + SARLUCN(_12, 1); + SARLUS(specRouterTimeout); + SARLUCN(_13, 5); + + /* Scrambled Area */ + SARLUIA(SID); + SARLUCN(encryptionKey, 12); + SARLUIA(_14); + SARLUSA(waitTime); + SARLUSA(lParameter); + SARLUCN(_15, 3); + SARLUS(headerSize); + SARLUS(sectionChecksum); + + SARLUC(registrationMode); + SARLUC(registrationFill); + SARLUS(pollPeriod); + SARLUS(refreshPeriod); + SARLSTR(name, 16); + SARLUCN(NID, 6); + SARLUC(localTalkAddress); + SARLUC(codeFormat); + SARLUC(numChannels); + SARLUC(channel1); + SARLUC(channel2); + SARLUC(channel3); + SARLUC(channel4); + SARLUCN(SSCode, 59); + +/* SARLUCN( _16, 0x140); + */ + /* Statistics Block - 0x0300 */ + SARLUC(hostcpuLock); + SARLUC(lancpuLock); + SARLUCN(resetTime, 18); + SARLUIA(numDatagramsTransmitted); + SARLUIA(numReTransmissions); + SARLUIA(numFramesDiscarded); + SARLUIA(numDatagramsReceived); + SARLUIA(numDuplicateReceivedFrames); + SARLUIA(numDatagramsDiscarded); + SARLUS(maxNumReTransmitDatagram); + SARLUS(maxNumReTransmitFrames); + SARLUS(maxNumConsecutiveDuplicateFrames); + /* misaligned here so we have to go to characters */ + SARLUIA(numBytesTransmitted); + SARLUIA(numBytesReceived); + SARLUIA(numCRCErrors); + SARLUIA(numLengthErrors); + SARLUIA(numAbortErrors); + SARLUIA(numTXUnderruns); + SARLUIA(numRXOverruns); + SARLUIA(numHoldOffs); + SARLUIA(numFramesTransmitted); + SARLUIA(numFramesReceived); + SARLUIA(numReceiveFramesLost); + SARLUIA(numRXBufferOverflows); + SARLUIA(numFramesDiscardedAddrMismatch); + SARLUIA(numFramesDiscardedSIDMismatch); + SARLUIA(numPollsTransmistted); + SARLUIA(numPollAcknowledges); + SARLUIA(numStatusTimeouts); + SARLUIA(numNACKReceived); + SARLUS(auxCmd); + SARLUCN(dumpPtr, 4); + SARLUC(dumpVal); + SARLUC(wireTest); + + /* next 4 seems too long for procfs, over single page ? + SARLUCN( _17, 0x86); + SARLUCN( txBuffer, 0x800); + SARLUCN( rxBuffer, 0x800); + SARLUCN( _18, 0x0bff); + */ + + pos += sprintf(arlan_drive_info + pos, "rxRing\t=\t0x"); + for (i = 0; i < 0x50; i++) + pos += sprintf(arlan_drive_info + pos, "%02x", ((char *) priva->conf)[priva->conf->rxOffset + i]); + pos += sprintf(arlan_drive_info + pos, "\n"); + + SARLUC(configStatus); + SARLUC(_22); + SARLUC(progIOCtrl); + SARLUC(shareMBase); + SARLUC(controlRegister); + + pos += sprintf(arlan_drive_info + pos, " total %d chars\n", pos); + if (ctl) + if (ctl->procname) + pos += sprintf(arlan_drive_info + pos, " driver name : %s\n", ctl->procname); +final: + *lenp = pos; + + if (!write) + retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); + else + { + *lenp = 0; + return -1; + } + return retv; +} + + +static int arlan_sysctl_info161719(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int i; + int retv, pos, devnum; + struct arlan_private *priva = NULL; + + pos = 0; + devnum = ctl->procname[5] - '0'; + if (arlan_device[devnum] == NULL) + { + pos += sprintf(arlan_drive_info + pos, "No device found here \n"); + goto final; + } + else + priva = arlan_device[devnum]->priv; + if (priva == NULL) + { + printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); + return -1; + } + memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); + SARLUCN(_16, 0xC0); + SARLUCN(_17, 0x6A); + SARLUCN(_18, 14); + SARLUCN(_19, 0x86); + SARLUCN(_21, 0x3fd); + +final: + *lenp = pos; + retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); + return retv; +} + +static int arlan_sysctl_infotxRing(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int i; + int retv, pos, devnum; + struct arlan_private *priva = NULL; + + pos = 0; + devnum = ctl->procname[5] - '0'; + if (arlan_device[devnum] == NULL) + { + pos += sprintf(arlan_drive_info + pos, "No device found here \n"); + goto final; + } + else + priva = arlan_device[devnum]->priv; + if (priva == NULL) + { + printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); + return -1; + } + memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); + SARLBNpln(u_char, txBuffer, 0x800); +final: + *lenp = pos; + retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); + return retv; +} + +static int arlan_sysctl_inforxRing(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int i; + int retv, pos, devnum; + struct arlan_private *priva = NULL; + + pos = 0; + devnum = ctl->procname[5] - '0'; + if (arlan_device[devnum] == NULL) + { + pos += sprintf(arlan_drive_info + pos, "No device found here \n"); + goto final; + } else + priva = arlan_device[devnum]->priv; + if (priva == NULL) + { + printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); + return -1; + } + memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); + SARLBNpln(u_char, rxBuffer, 0x800); +final: + *lenp = pos; + retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); + return retv; +} + +static int arlan_sysctl_info18(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int i; + int retv, pos, devnum; + struct arlan_private *priva = NULL; + + pos = 0; + devnum = ctl->procname[5] - '0'; + if (arlan_device[devnum] == NULL) + { + pos += sprintf(arlan_drive_info + pos, "No device found here \n"); + goto final; + } + else + priva = arlan_device[devnum]->priv; + if (priva == NULL) + { + printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); + return -1; + } + memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); + SARLBNpln(u_char, _18, 0x800); + +final: + *lenp = pos; + retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); + return retv; +} + + +#endif /* #ifdef ARLAN_PROC_SHM_DUMP */ + + +static char conf_reset_result[200]; + +static int arlan_configure(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int pos = 0; + int devnum = ctl->procname[6] - '0'; + struct arlan_private *priv; + + if (devnum < 0 || devnum > MAX_ARLANS - 1) + { + printk(KERN_WARNING "too strange devnum in procfs parse\n "); + return -1; + } + else if (arlan_device[devnum] != NULL) + { + priv = arlan_device[devnum]->priv; + + arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_CONF); + } + else + return -1; + + *lenp = pos; + return proc_dostring(ctl, write, filp, buffer, lenp, ppos); +} + +static int arlan_sysctl_reset(ctl_table * ctl, int write, struct file *filp, + void __user *buffer, size_t * lenp, loff_t *ppos) +{ + int pos = 0; + int devnum = ctl->procname[5] - '0'; + struct arlan_private *priv; + + if (devnum < 0 || devnum > MAX_ARLANS - 1) + { + printk(KERN_WARNING "too strange devnum in procfs parse\n "); + return -1; + } + else if (arlan_device[devnum] != NULL) + { + priv = arlan_device[devnum]->priv; + arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_RESET); + + } else + return -1; + *lenp = pos + 3; + return proc_dostring(ctl, write, filp, buffer, lenp, ppos); +} + + +/* Place files in /proc/sys/dev/arlan */ +#define CTBLN(num,card,nam) \ + { .ctl_name = num,\ + .procname = #nam,\ + .data = &(arlan_conf[card].nam),\ + .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec} +#ifdef ARLAN_DEBUGGING + +#define ARLAN_PROC_DEBUG_ENTRIES \ + { .ctl_name = 48, .procname = "entry_exit_debug",\ + .data = &arlan_entry_and_exit_debug,\ + .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},\ + { .ctl_name = 49, .procname = "debug", .data = &arlan_debug,\ + .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec}, +#else +#define ARLAN_PROC_DEBUG_ENTRIES +#endif + +#define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\ + CTBLN(1,cardNo,spreadingCode),\ + CTBLN(2,cardNo, channelNumber),\ + CTBLN(3,cardNo, scramblingDisable),\ + CTBLN(4,cardNo, txAttenuation),\ + CTBLN(5,cardNo, systemId), \ + CTBLN(6,cardNo, maxDatagramSize),\ + CTBLN(7,cardNo, maxFrameSize),\ + CTBLN(8,cardNo, maxRetries),\ + CTBLN(9,cardNo, receiveMode),\ + CTBLN(10,cardNo, priority),\ + CTBLN(11,cardNo, rootOrRepeater),\ + CTBLN(12,cardNo, SID),\ + CTBLN(13,cardNo, registrationMode),\ + CTBLN(14,cardNo, registrationFill),\ + CTBLN(15,cardNo, localTalkAddress),\ + CTBLN(16,cardNo, codeFormat),\ + CTBLN(17,cardNo, numChannels),\ + CTBLN(18,cardNo, channel1),\ + CTBLN(19,cardNo, channel2),\ + CTBLN(20,cardNo, channel3),\ + CTBLN(21,cardNo, channel4),\ + CTBLN(22,cardNo, txClear),\ + CTBLN(23,cardNo, txRetries),\ + CTBLN(24,cardNo, txRouting),\ + CTBLN(25,cardNo, txScrambled),\ + CTBLN(26,cardNo, rxParameter),\ + CTBLN(27,cardNo, txTimeoutMs),\ + CTBLN(28,cardNo, waitCardTimeout),\ + CTBLN(29,cardNo, channelSet), \ + {.ctl_name = 30, .procname = "name",\ + .data = arlan_conf[cardNo].siteName,\ + .maxlen = 16, .mode = 0600, .proc_handler = &proc_dostring},\ + CTBLN(31,cardNo,waitTime),\ + CTBLN(32,cardNo,lParameter),\ + CTBLN(33,cardNo,_15),\ + CTBLN(34,cardNo,headerSize),\ + CTBLN(36,cardNo,tx_delay_ms),\ + CTBLN(37,cardNo,retries),\ + CTBLN(38,cardNo,ReTransmitPacketMaxSize),\ + CTBLN(39,cardNo,waitReTransmitPacketMaxSize),\ + CTBLN(40,cardNo,fastReTransCount),\ + CTBLN(41,cardNo,driverRetransmissions),\ + CTBLN(42,cardNo,txAckTimeoutMs),\ + CTBLN(43,cardNo,registrationInterrupts),\ + CTBLN(44,cardNo,hardwareType),\ + CTBLN(45,cardNo,radioType),\ + CTBLN(46,cardNo,writeEEPROM),\ + CTBLN(47,cardNo,writeRadioType),\ + ARLAN_PROC_DEBUG_ENTRIES\ + CTBLN(50,cardNo,in_speed),\ + CTBLN(51,cardNo,out_speed),\ + CTBLN(52,cardNo,in_speed10),\ + CTBLN(53,cardNo,out_speed10),\ + CTBLN(54,cardNo,in_speed_max),\ + CTBLN(55,cardNo,out_speed_max),\ + CTBLN(56,cardNo,measure_rate),\ + CTBLN(57,cardNo,pre_Command_Wait),\ + CTBLN(58,cardNo,rx_tweak1),\ + CTBLN(59,cardNo,rx_tweak2),\ + CTBLN(60,cardNo,tx_queue_len),\ + + + +static ctl_table arlan_conf_table0[] = +{ + ARLAN_SYSCTL_TABLE_TOTAL(0) + +#ifdef ARLAN_PROC_SHM_DUMP + { + .ctl_name = 150, + .procname = "arlan0-txRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_infotxRing, + }, + { + .ctl_name = 151, + .procname = "arlan0-rxRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_inforxRing, + }, + { + .ctl_name = 152, + .procname = "arlan0-18", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info18, + }, + { + .ctl_name = 153, + .procname = "arlan0-ring", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info161719, + }, + { + .ctl_name = 154, + .procname = "arlan0-shm-cpy", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info, + }, +#endif + { + .ctl_name = 155, + .procname = "config0", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_configure + }, + { + .ctl_name = 156, + .procname = "reset0", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_sysctl_reset, + }, + { .ctl_name = 0 } +}; + +static ctl_table arlan_conf_table1[] = +{ + + ARLAN_SYSCTL_TABLE_TOTAL(1) + +#ifdef ARLAN_PROC_SHM_DUMP + { + .ctl_name = 150, + .procname = "arlan1-txRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_infotxRing, + }, + { + .ctl_name = 151, + .procname = "arlan1-rxRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_inforxRing, + }, + { + .ctl_name = 152, + .procname = "arlan1-18", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info18, + }, + { + .ctl_name = 153, + .procname = "arlan1-ring", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info161719, + }, + { + .ctl_name = 154, + .procname = "arlan1-shm-cpy", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info, + }, +#endif + { + .ctl_name = 155, + .procname = "config1", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_configure, + }, + { + .ctl_name = 156, + .procname = "reset1", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_sysctl_reset, + }, + { .ctl_name = 0 } +}; + +static ctl_table arlan_conf_table2[] = +{ + + ARLAN_SYSCTL_TABLE_TOTAL(2) + +#ifdef ARLAN_PROC_SHM_DUMP + { + .ctl_name = 150, + .procname = "arlan2-txRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_infotxRing, + }, + { + .ctl_name = 151, + .procname = "arlan2-rxRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_inforxRing, + }, + { + .ctl_name = 152, + .procname = "arlan2-18", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info18, + }, + { + .ctl_name = 153, + .procname = "arlan2-ring", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info161719, + }, + { + .ctl_name = 154, + .procname = "arlan2-shm-cpy", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info, + }, +#endif + { + .ctl_name = 155, + .procname = "config2", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_configure, + }, + { + .ctl_name = 156, + .procname = "reset2", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_sysctl_reset, + }, + { .ctl_name = 0 } +}; + +static ctl_table arlan_conf_table3[] = +{ + + ARLAN_SYSCTL_TABLE_TOTAL(3) + +#ifdef ARLAN_PROC_SHM_DUMP + { + .ctl_name = 150, + .procname = "arlan3-txRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_infotxRing, + }, + { + .ctl_name = 151, + .procname = "arlan3-rxRing", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_inforxRing, + }, + { + .ctl_name = 152, + .procname = "arlan3-18", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info18, + }, + { + .ctl_name = 153, + .procname = "arlan3-ring", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info161719, + }, + { + .ctl_name = 154, + .procname = "arlan3-shm-cpy", + .data = &arlan_drive_info, + .maxlen = ARLAN_STR_SIZE, + .mode = 0400, + .proc_handler = &arlan_sysctl_info, + }, +#endif + { + .ctl_name = 155, + .procname = "config3", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_configure, + }, + { + .ctl_name = 156, + .procname = "reset3", + .data = &conf_reset_result, + .maxlen = 100, + .mode = 0400, + .proc_handler = &arlan_sysctl_reset, + }, + { .ctl_name = 0 } +}; + + + +static ctl_table arlan_table[] = +{ + { + .ctl_name = 0, + .procname = "arlan0", + .maxlen = 0, + .mode = 0600, + .child = arlan_conf_table0, + }, + { + .ctl_name = 0, + .procname = "arlan1", + .maxlen = 0, + .mode = 0600, + .child = arlan_conf_table1, + }, + { + .ctl_name = 0, + .procname = "arlan2", + .maxlen = 0, + .mode = 0600, + .child = arlan_conf_table2, + }, + { + .ctl_name = 0, + .procname = "arlan3", + .maxlen = 0, + .mode = 0600, + .child = arlan_conf_table3, + }, + { .ctl_name = 0 } +}; + +#else + +static ctl_table arlan_table[MAX_ARLANS + 1] = +{ + { .ctl_name = 0 } +}; +#endif +#else + +static ctl_table arlan_table[MAX_ARLANS + 1] = +{ + { .ctl_name = 0 } +}; +#endif + + +// static int mmtu = 1234; + +static ctl_table arlan_root_table[] = +{ + { + .ctl_name = 254, + .procname = "arlan", + .maxlen = 0, + .mode = 0555, + .child = arlan_table, + }, + { .ctl_name = 0 } +}; + +/* Make sure that /proc/sys/dev is there */ +//static ctl_table arlan_device_root_table[] = +//{ +// {CTL_DEV, "dev", NULL, 0, 0555, arlan_root_table}, +// {0} +//}; + + +#ifdef CONFIG_PROC_FS +static struct ctl_table_header *arlan_device_sysctl_header; + +int __init init_arlan_proc(void) +{ + + int i = 0; + if (arlan_device_sysctl_header) + return 0; + for (i = 0; i < MAX_ARLANS && arlan_device[i]; i++) + arlan_table[i].ctl_name = i + 1; + arlan_device_sysctl_header = register_sysctl_table(arlan_root_table, 0); + if (!arlan_device_sysctl_header) + return -1; + + return 0; + +} + +void __exit cleanup_arlan_proc(void) +{ + unregister_sysctl_table(arlan_device_sysctl_header); + arlan_device_sysctl_header = NULL; + +} +#endif diff --git a/drivers/net/wireless/arlan.h b/drivers/net/wireless/arlan.h new file mode 100644 index 00000000000..70a6d7b83c4 --- /dev/null +++ b/drivers/net/wireless/arlan.h @@ -0,0 +1,541 @@ +/* + * Copyright (C) 1997 Cullen Jennings + * Copyright (C) 1998 Elmer.Joandi@ut.ee, +37-255-13500 + * GNU General Public License applies + */ + +#include <linux/module.h> +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/skbuff.h> +#include <linux/if_ether.h> /* For the statistics structure. */ +#include <linux/if_arp.h> /* For ARPHRD_ETHER */ +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> + +#include <linux/init.h> +#include <linux/bitops.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> + + +//#define ARLAN_DEBUGGING 1 + +#define ARLAN_PROC_INTERFACE +#define MAX_ARLANS 4 /* not more than 4 ! */ +#define ARLAN_PROC_SHM_DUMP /* shows all card registers, makes driver way larger */ + +#define ARLAN_MAX_MULTICAST_ADDRS 16 +#define ARLAN_RCV_CLEAN 0 +#define ARLAN_RCV_PROMISC 1 +#define ARLAN_RCV_CONTROL 2 + +#ifdef CONFIG_PROC_FS +extern int init_arlan_proc(void); +extern void cleanup_arlan_proc(void); +#else +#define init_arlan_proc() ({ 0; }) +#define cleanup_arlan_proc() do { } while (0) +#endif + +extern struct net_device *arlan_device[MAX_ARLANS]; +extern int arlan_debug; +extern int arlan_entry_debug; +extern int arlan_exit_debug; +extern int testMemory; +extern int arlan_command(struct net_device * dev, int command); + +#define SIDUNKNOWN -1 +#define radioNodeIdUNKNOWN -1 +#define irqUNKNOWN 0 +#define debugUNKNOWN 0 +#define testMemoryUNKNOWN 1 +#define spreadingCodeUNKNOWN 0 +#define channelNumberUNKNOWN 0 +#define channelSetUNKNOWN 0 +#define systemIdUNKNOWN -1 +#define registrationModeUNKNOWN -1 + + +#define IFDEBUG( L ) if ( (L) & arlan_debug ) +#define ARLAN_FAKE_HDR_LEN 12 + +#ifdef ARLAN_DEBUGGING + #define DEBUG 1 + #define ARLAN_ENTRY_EXIT_DEBUGGING 1 + #define ARLAN_DEBUG(a,b) printk(KERN_DEBUG a, b) +#else + #define ARLAN_DEBUG(a,b) +#endif + +#define ARLAN_SHMEM_SIZE 0x2000 + +struct arlan_shmem +{ + /* Header Signature */ + volatile char textRegion[48]; + volatile u_char resetFlag; + volatile u_char diagnosticInfo; + volatile u_short diagnosticOffset; + volatile u_char _1[12]; + volatile u_char lanCardNodeId[6]; + volatile u_char broadcastAddress[6]; + volatile u_char hardwareType; + volatile u_char majorHardwareVersion; + volatile u_char minorHardwareVersion; + volatile u_char radioModule;// shows EEPROM, can be overridden at 0x111 + volatile u_char defaultChannelSet; // shows EEProm, can be overriiden at 0x10A + volatile u_char _2[47]; + + /* Control/Status Block - 0x0080 */ + volatile u_char interruptInProgress; /* not used by lancpu */ + volatile u_char cntrlRegImage; /* not used by lancpu */ + volatile u_char _3[13]; + volatile u_char dumpByte; + volatile u_char commandByte; /* non-zero = active */ + volatile u_char commandParameter[15]; + + /* Receive Status - 0x00a0 */ + volatile u_char rxStatus; /* 1- data, 2-control, 0xff - registr change */ + volatile u_char rxFrmType; + volatile u_short rxOffset; + volatile u_short rxLength; + volatile u_char rxSrc[6]; + volatile u_char rxBroadcastFlag; + volatile u_char rxQuality; + volatile u_char scrambled; + volatile u_char _4[1]; + + /* Transmit Status - 0x00b0 */ + volatile u_char txStatus; + volatile u_char txAckQuality; + volatile u_char numRetries; + volatile u_char _5[14]; + volatile u_char registeredRouter[6]; + volatile u_char backboneRouter[6]; + volatile u_char registrationStatus; + volatile u_char configuredStatusFlag; + volatile u_char _6[1]; + volatile u_char ultimateDestAddress[6]; + volatile u_char immedDestAddress[6]; + volatile u_char immedSrcAddress[6]; + volatile u_short rxSequenceNumber; + volatile u_char assignedLocaltalkAddress; + volatile u_char _7[27]; + + /* System Parameter Block */ + + /* - Driver Parameters (Novell Specific) */ + + volatile u_short txTimeout; + volatile u_short transportTime; + volatile u_char _8[4]; + + /* - Configuration Parameters */ + volatile u_char irqLevel; + volatile u_char spreadingCode; + volatile u_char channelSet; + volatile u_char channelNumber; + volatile u_short radioNodeId; + volatile u_char _9[2]; + volatile u_char scramblingDisable; + volatile u_char radioType; + volatile u_short routerId; + volatile u_char _10[9]; + volatile u_char txAttenuation; + volatile u_char systemId[4]; + volatile u_short globalChecksum; + volatile u_char _11[4]; + volatile u_short maxDatagramSize; + volatile u_short maxFrameSize; + volatile u_char maxRetries; + volatile u_char receiveMode; + volatile u_char priority; + volatile u_char rootOrRepeater; + volatile u_char specifiedRouter[6]; + volatile u_short fastPollPeriod; + volatile u_char pollDecay; + volatile u_char fastPollDelay[2]; + volatile u_char arlThreshold; + volatile u_char arlDecay; + volatile u_char _12[1]; + volatile u_short specRouterTimeout; + volatile u_char _13[5]; + + /* Scrambled Area */ + volatile u_char SID[4]; + volatile u_char encryptionKey[12]; + volatile u_char _14[2]; + volatile u_char waitTime[2]; + volatile u_char lParameter[2]; + volatile u_char _15[3]; + volatile u_short headerSize; + volatile u_short sectionChecksum; + + volatile u_char registrationMode; + volatile u_char registrationFill; + volatile u_short pollPeriod; + volatile u_short refreshPeriod; + volatile u_char name[16]; + volatile u_char NID[6]; + volatile u_char localTalkAddress; + volatile u_char codeFormat; + volatile u_char numChannels; + volatile u_char channel1; + volatile u_char channel2; + volatile u_char channel3; + volatile u_char channel4; + volatile u_char SSCode[59]; + + volatile u_char _16[0xC0]; + volatile u_short auxCmd; + volatile u_char dumpPtr[4]; + volatile u_char dumpVal; + volatile u_char _17[0x6A]; + volatile u_char wireTest; + volatile u_char _18[14]; + + /* Statistics Block - 0x0300 */ + volatile u_char hostcpuLock; + volatile u_char lancpuLock; + volatile u_char resetTime[18]; + + volatile u_char numDatagramsTransmitted[4]; + volatile u_char numReTransmissions[4]; + volatile u_char numFramesDiscarded[4]; + volatile u_char numDatagramsReceived[4]; + volatile u_char numDuplicateReceivedFrames[4]; + volatile u_char numDatagramsDiscarded[4]; + + volatile u_short maxNumReTransmitDatagram; + volatile u_short maxNumReTransmitFrames; + volatile u_short maxNumConsecutiveDuplicateFrames; + /* misaligned here so we have to go to characters */ + + volatile u_char numBytesTransmitted[4]; + volatile u_char numBytesReceived[4]; + volatile u_char numCRCErrors[4]; + volatile u_char numLengthErrors[4]; + volatile u_char numAbortErrors[4]; + volatile u_char numTXUnderruns[4]; + volatile u_char numRXOverruns[4]; + volatile u_char numHoldOffs[4]; + volatile u_char numFramesTransmitted[4]; + volatile u_char numFramesReceived[4]; + volatile u_char numReceiveFramesLost[4]; + volatile u_char numRXBufferOverflows[4]; + volatile u_char numFramesDiscardedAddrMismatch[4]; + volatile u_char numFramesDiscardedSIDMismatch[4]; + volatile u_char numPollsTransmistted[4]; + volatile u_char numPollAcknowledges[4]; + volatile u_char numStatusTimeouts[4]; + volatile u_char numNACKReceived[4]; + + volatile u_char _19[0x86]; + + volatile u_char txBuffer[0x800]; + volatile u_char rxBuffer[0x800]; + + volatile u_char _20[0x800]; + volatile u_char _21[0x3fb]; + volatile u_char configStatus; + volatile u_char _22; + volatile u_char progIOCtrl; + volatile u_char shareMBase; + volatile u_char controlRegister; +}; + +struct arlan_conf_stru { + int spreadingCode; + int channelSet; + int channelNumber; + int scramblingDisable; + int txAttenuation; + int systemId; + int maxDatagramSize; + int maxFrameSize; + int maxRetries; + int receiveMode; + int priority; + int rootOrRepeater; + int SID; + int radioNodeId; + int registrationMode; + int registrationFill; + int localTalkAddress; + int codeFormat; + int numChannels; + int channel1; + int channel2; + int channel3; + int channel4; + int txClear; + int txRetries; + int txRouting; + int txScrambled; + int rxParameter; + int txTimeoutMs; + int txAckTimeoutMs; + int waitCardTimeout; + int waitTime; + int lParameter; + int _15; + int headerSize; + int retries; + int tx_delay_ms; + int waitReTransmitPacketMaxSize; + int ReTransmitPacketMaxSize; + int fastReTransCount; + int driverRetransmissions; + int registrationInterrupts; + int hardwareType; + int radioType; + int writeRadioType; + int writeEEPROM; + char siteName[17]; + int measure_rate; + int in_speed; + int out_speed; + int in_speed10; + int out_speed10; + int in_speed_max; + int out_speed_max; + int pre_Command_Wait; + int rx_tweak1; + int rx_tweak2; + int tx_queue_len; +}; + +extern struct arlan_conf_stru arlan_conf[MAX_ARLANS]; + +struct TxParam +{ + volatile short offset; + volatile short length; + volatile u_char dest[6]; + volatile unsigned char clear; + volatile unsigned char retries; + volatile unsigned char routing; + volatile unsigned char scrambled; +}; + +#define TX_RING_SIZE 2 +/* Information that need to be kept for each board. */ +struct arlan_private { + struct net_device_stats stats; + struct arlan_shmem __iomem * card; + struct arlan_shmem * conf; + + struct arlan_conf_stru * Conf; + int bad; + int reset; + unsigned long lastReset; + struct timer_list timer; + struct timer_list tx_delay_timer; + struct timer_list tx_retry_timer; + struct timer_list rx_check_timer; + + int registrationLostCount; + int reRegisterExp; + int irq_test_done; + + struct TxParam txRing[TX_RING_SIZE]; + char reTransmitBuff[0x800]; + int txLast; + unsigned ReTransmitRequested; + unsigned long tx_done_delayed; + unsigned long registrationLastSeen; + + unsigned long tx_last_sent; + unsigned long tx_last_cleared; + unsigned long retransmissions; + unsigned long interrupt_ack_requested; + spinlock_t lock; + unsigned long waiting_command_mask; + unsigned long card_polling_interval; + unsigned long last_command_buff_free_time; + + int under_reset; + int under_config; + int rx_command_given; + int tx_command_given; + unsigned long interrupt_processing_active; + unsigned long last_rx_int_ack_time; + unsigned long in_bytes; + unsigned long out_bytes; + unsigned long in_time; + unsigned long out_time; + unsigned long in_time10; + unsigned long out_time10; + unsigned long in_bytes10; + unsigned long out_bytes10; + int init_etherdev_alloc; +}; + + + +#define ARLAN_CLEAR 0x00 +#define ARLAN_RESET 0x01 +#define ARLAN_CHANNEL_ATTENTION 0x02 +#define ARLAN_INTERRUPT_ENABLE 0x04 +#define ARLAN_CLEAR_INTERRUPT 0x08 +#define ARLAN_POWER 0x40 +#define ARLAN_ACCESS 0x80 + +#define ARLAN_COM_CONF 0x01 +#define ARLAN_COM_RX_ENABLE 0x03 +#define ARLAN_COM_RX_ABORT 0x04 +#define ARLAN_COM_TX_ENABLE 0x05 +#define ARLAN_COM_TX_ABORT 0x06 +#define ARLAN_COM_NOP 0x07 +#define ARLAN_COM_STANDBY 0x08 +#define ARLAN_COM_ACTIVATE 0x09 +#define ARLAN_COM_GOTO_SLOW_POLL 0x0a +#define ARLAN_COM_INT 0x80 + + +#define TXLAST(dev) (((struct arlan_private *)netdev_priv(dev))->txRing[((struct arlan_private *)netdev_priv(dev))->txLast]) +#define TXHEAD(dev) (((struct arlan_private *)netdev_priv(dev))->txRing[0]) +#define TXTAIL(dev) (((struct arlan_private *)netdev_priv(dev))->txRing[1]) + +#define TXBuffStart(dev) offsetof(struct arlan_shmem, txBuffer) +#define TXBuffEnd(dev) offsetof(struct arlan_shmem, xxBuffer) + +#define READSHM(to,from,atype) {\ + atype tmp;\ + memcpy_fromio(&(tmp),&(from),sizeof(atype));\ + to = tmp;\ + } + +#define READSHMEM(from,atype)\ + atype from; \ + READSHM(from, arlan->from, atype); + +#define WRITESHM(to,from,atype) \ + { atype tmpSHM = from;\ + memcpy_toio(&(to),&tmpSHM,sizeof(atype));\ + } + +#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \ + { atype tmpSHM; \ + memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\ + IFDEBUG(levelSHM) printk(stringSHM,tmpSHM);\ + } + +#define WRITESHMB(to, val) \ + writeb(val,&(to)) +#define READSHMB(to) \ + readb(&(to)) +#define WRITESHMS(to, val) \ + writew(val,&(to)) +#define READSHMS(to) \ + readw(&(to)) +#define WRITESHMI(to, val) \ + writel(val,&(to)) +#define READSHMI(to) \ + readl(&(to)) + + + + + +#define registrationBad(dev)\ + ( ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationMode) > 0) && \ + ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) ) + + +#define readControlRegister(dev)\ + READSHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage) + +#define writeControlRegister(dev, v){\ + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\ + WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );} + + +#define arlan_interrupt_lancpu(dev) {\ + int cr; \ + \ + cr = readControlRegister(dev);\ + if (cr & ARLAN_CHANNEL_ATTENTION){ \ + writeControlRegister(dev, (cr & ~ARLAN_CHANNEL_ATTENTION));\ + }else \ + writeControlRegister(dev, (cr | ARLAN_CHANNEL_ATTENTION));\ +} + +#define clearChannelAttention(dev){ \ + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);} +#define setHardwareReset(dev) {\ + writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);} +#define clearHardwareReset(dev) {\ + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);} +#define setInterruptEnable(dev){\ + writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;} +#define clearInterruptEnable(dev){\ + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;} +#define setClearInterrupt(dev){\ + writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;} +#define clearClearInterrupt(dev){\ + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);} +#define setPowerOff(dev){\ + writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\ + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);} +#define setPowerOn(dev){\ + writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); } +#define arlan_lock_card_access(dev){\ + writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);} +#define arlan_unlock_card_access(dev){\ + writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } + + + + +#define ARLAN_COMMAND_RX 0x000001 +#define ARLAN_COMMAND_NOOP 0x000002 +#define ARLAN_COMMAND_NOOPINT 0x000004 +#define ARLAN_COMMAND_TX 0x000008 +#define ARLAN_COMMAND_CONF 0x000010 +#define ARLAN_COMMAND_RESET 0x000020 +#define ARLAN_COMMAND_TX_ABORT 0x000040 +#define ARLAN_COMMAND_RX_ABORT 0x000080 +#define ARLAN_COMMAND_POWERDOWN 0x000100 +#define ARLAN_COMMAND_POWERUP 0x000200 +#define ARLAN_COMMAND_SLOW_POLL 0x000400 +#define ARLAN_COMMAND_ACTIVATE 0x000800 +#define ARLAN_COMMAND_INT_ACK 0x001000 +#define ARLAN_COMMAND_INT_ENABLE 0x002000 +#define ARLAN_COMMAND_WAIT_NOW 0x004000 +#define ARLAN_COMMAND_LONG_WAIT_NOW 0x008000 +#define ARLAN_COMMAND_STANDBY 0x010000 +#define ARLAN_COMMAND_INT_RACK 0x020000 +#define ARLAN_COMMAND_INT_RENABLE 0x040000 +#define ARLAN_COMMAND_CONF_WAIT 0x080000 +#define ARLAN_COMMAND_TBUSY_CLEAR 0x100000 +#define ARLAN_COMMAND_CLEAN_AND_CONF (ARLAN_COMMAND_TX_ABORT\ + | ARLAN_COMMAND_RX_ABORT\ + | ARLAN_COMMAND_CONF) +#define ARLAN_COMMAND_CLEAN_AND_RESET (ARLAN_COMMAND_TX_ABORT\ + | ARLAN_COMMAND_RX_ABORT\ + | ARLAN_COMMAND_RESET) + + + +#define ARLAN_DEBUG_CHAIN_LOCKS 0x00001 +#define ARLAN_DEBUG_RESET 0x00002 +#define ARLAN_DEBUG_TIMING 0x00004 +#define ARLAN_DEBUG_CARD_STATE 0x00008 +#define ARLAN_DEBUG_TX_CHAIN 0x00010 +#define ARLAN_DEBUG_MULTICAST 0x00020 +#define ARLAN_DEBUG_HEADER_DUMP 0x00040 +#define ARLAN_DEBUG_INTERRUPT 0x00080 +#define ARLAN_DEBUG_STARTUP 0x00100 +#define ARLAN_DEBUG_SHUTDOWN 0x00200 + diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c new file mode 100644 index 00000000000..18a7d38d2a1 --- /dev/null +++ b/drivers/net/wireless/atmel.c @@ -0,0 +1,4272 @@ +/*** -*- linux-c -*- ********************************************************** + + Driver for Atmel at76c502 at76c504 and at76c506 wireless cards. + + Copyright 2000-2001 ATMEL Corporation. + Copyright 2003-2004 Simon Kelley. + + This code was developed from version 2.1.1 of the Atmel drivers, + released by Atmel corp. under the GPL in December 2002. It also + includes code from the Linux aironet drivers (C) Benjamin Reed, + and the Linux PCMCIA package, (C) David Hinds and the Linux wireless + extensions, (C) Jean Tourrilhes. + + The firmware module for reading the MAC address of the card comes from + net.russotto.AtmelMACFW, written by Matthew T. Russotto and copyright + by him. net.russotto.AtmelMACFW is used under the GPL license version 2. + This file contains the module in binary form and, under the terms + of the GPL, in source form. The source is located at the end of the file. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This software is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Atmel wireless lan drivers; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + For all queries about this code, please contact the current author, + Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation. + + Credit is due to HP UK and Cambridge Online Systems Ltd for supplying + hardware used during development of this driver. + +******************************************************************************/ + +#include <linux/config.h> +#include <linux/init.h> + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/timer.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/fcntl.h> +#include <linux/delay.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <linux/byteorder/generic.h> +#include <linux/crc32.h> +#include <linux/proc_fs.h> +#include <linux/device.h> +#include <linux/moduleparam.h> +#include <linux/firmware.h> +#include "ieee802_11.h" +#include "atmel.h" + +#define DRIVER_MAJOR 0 +#define DRIVER_MINOR 96 + +MODULE_AUTHOR("Simon Kelley"); +MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards."); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Atmel at76c50x wireless cards"); + +/* The name of the firmware file to be loaded + over-rides any automatic selection */ +static char *firmware = NULL; +module_param(firmware, charp, 0); + +/* table of firmware file names */ +static struct { + AtmelFWType fw_type; + const char *fw_file; + const char *fw_file_ext; +} fw_table[] = { + { ATMEL_FW_TYPE_502, "atmel_at76c502", "bin" }, + { ATMEL_FW_TYPE_502D, "atmel_at76c502d", "bin" }, + { ATMEL_FW_TYPE_502E, "atmel_at76c502e", "bin" }, + { ATMEL_FW_TYPE_502_3COM, "atmel_at76c502_3com", "bin" }, + { ATMEL_FW_TYPE_504, "atmel_at76c504", "bin" }, + { ATMEL_FW_TYPE_504_2958, "atmel_at76c504_2958", "bin" }, + { ATMEL_FW_TYPE_504A_2958,"atmel_at76c504a_2958","bin" }, + { ATMEL_FW_TYPE_506, "atmel_at76c506", "bin" }, + { ATMEL_FW_TYPE_NONE, NULL, NULL } +}; + +#define MAX_SSID_LENGTH 32 +#define MGMT_JIFFIES (256 * HZ / 100) + +#define MAX_BSS_ENTRIES 64 + +/* registers */ +#define GCR 0x00 // (SIR0) General Configuration Register +#define BSR 0x02 // (SIR1) Bank Switching Select Register +#define AR 0x04 +#define DR 0x08 +#define MR1 0x12 // Mirror Register 1 +#define MR2 0x14 // Mirror Register 2 +#define MR3 0x16 // Mirror Register 3 +#define MR4 0x18 // Mirror Register 4 + +#define GPR1 0x0c +#define GPR2 0x0e +#define GPR3 0x10 +// +// Constants for the GCR register. +// +#define GCR_REMAP 0x0400 // Remap internal SRAM to 0 +#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset) +#define GCR_CORES 0x0060 // Core Reset (ARM and PAI are reset) +#define GCR_ENINT 0x0002 // Enable Interrupts +#define GCR_ACKINT 0x0008 // Acknowledge Interrupts + +#define BSS_SRAM 0x0200 // AMBA module selection --> SRAM +#define BSS_IRAM 0x0100 // AMBA module selection --> IRAM +// +// Constants for the MR registers. +// +#define MAC_INIT_COMPLETE 0x0001 // MAC init has been completed +#define MAC_BOOT_COMPLETE 0x0010 // MAC boot has been completed +#define MAC_INIT_OK 0x0002 // MAC boot has been completed + +#define C80211_SUBTYPE_MGMT_ASS_REQUEST 0x00 +#define C80211_SUBTYPE_MGMT_ASS_RESPONSE 0x10 +#define C80211_SUBTYPE_MGMT_REASS_REQUEST 0x20 +#define C80211_SUBTYPE_MGMT_REASS_RESPONSE 0x30 +#define C80211_SUBTYPE_MGMT_ProbeRequest 0x40 +#define C80211_SUBTYPE_MGMT_ProbeResponse 0x50 +#define C80211_SUBTYPE_MGMT_BEACON 0x80 +#define C80211_SUBTYPE_MGMT_ATIM 0x90 +#define C80211_SUBTYPE_MGMT_DISASSOSIATION 0xA0 +#define C80211_SUBTYPE_MGMT_Authentication 0xB0 +#define C80211_SUBTYPE_MGMT_Deauthentication 0xC0 + +#define C80211_MGMT_AAN_OPENSYSTEM 0x0000 +#define C80211_MGMT_AAN_SHAREDKEY 0x0001 + +#define C80211_MGMT_CAPABILITY_ESS 0x0001 // see 802.11 p.58 +#define C80211_MGMT_CAPABILITY_IBSS 0x0002 // - " - +#define C80211_MGMT_CAPABILITY_CFPollable 0x0004 // - " - +#define C80211_MGMT_CAPABILITY_CFPollRequest 0x0008 // - " - +#define C80211_MGMT_CAPABILITY_Privacy 0x0010 // - " - + +#define C80211_MGMT_SC_Success 0 +#define C80211_MGMT_SC_Unspecified 1 +#define C80211_MGMT_SC_SupportCapabilities 10 +#define C80211_MGMT_SC_ReassDenied 11 +#define C80211_MGMT_SC_AssDenied 12 +#define C80211_MGMT_SC_AuthAlgNotSupported 13 +#define C80211_MGMT_SC_AuthTransSeqNumError 14 +#define C80211_MGMT_SC_AuthRejectChallenge 15 +#define C80211_MGMT_SC_AuthRejectTimeout 16 +#define C80211_MGMT_SC_AssDeniedHandleAP 17 +#define C80211_MGMT_SC_AssDeniedBSSRate 18 + +#define C80211_MGMT_ElementID_SSID 0 +#define C80211_MGMT_ElementID_SupportedRates 1 +#define C80211_MGMT_ElementID_ChallengeText 16 +#define C80211_MGMT_CAPABILITY_ShortPreamble 0x0020 + +#define MIB_MAX_DATA_BYTES 212 +#define MIB_HEADER_SIZE 4 /* first four fields */ + +struct get_set_mib { + u8 type; + u8 size; + u8 index; + u8 reserved; + u8 data[MIB_MAX_DATA_BYTES]; +}; + +struct rx_desc { + u32 Next; + u16 MsduPos; + u16 MsduSize; + + u8 State; + u8 Status; + u8 Rate; + u8 Rssi; + u8 LinkQuality; + u8 PreambleType; + u16 Duration; + u32 RxTime; + +}; + +#define RX_DESC_FLAG_VALID 0x80 +#define RX_DESC_FLAG_CONSUMED 0x40 +#define RX_DESC_FLAG_IDLE 0x00 + +#define RX_STATUS_SUCCESS 0x00 + +#define RX_DESC_MSDU_POS_OFFSET 4 +#define RX_DESC_MSDU_SIZE_OFFSET 6 +#define RX_DESC_FLAGS_OFFSET 8 +#define RX_DESC_STATUS_OFFSET 9 +#define RX_DESC_RSSI_OFFSET 11 +#define RX_DESC_LINK_QUALITY_OFFSET 12 +#define RX_DESC_PREAMBLE_TYPE_OFFSET 13 +#define RX_DESC_DURATION_OFFSET 14 +#define RX_DESC_RX_TIME_OFFSET 16 + + +struct tx_desc { + u32 NextDescriptor; + u16 TxStartOfFrame; + u16 TxLength; + + u8 TxState; + u8 TxStatus; + u8 RetryCount; + + u8 TxRate; + + u8 KeyIndex; + u8 ChiperType; + u8 ChipreLength; + u8 Reserved1; + + u8 Reserved; + u8 PacketType; + u16 HostTxLength; + +}; + + +#define TX_DESC_NEXT_OFFSET 0 +#define TX_DESC_POS_OFFSET 4 +#define TX_DESC_SIZE_OFFSET 6 +#define TX_DESC_FLAGS_OFFSET 8 +#define TX_DESC_STATUS_OFFSET 9 +#define TX_DESC_RETRY_OFFSET 10 +#define TX_DESC_RATE_OFFSET 11 +#define TX_DESC_KEY_INDEX_OFFSET 12 +#define TX_DESC_CIPHER_TYPE_OFFSET 13 +#define TX_DESC_CIPHER_LENGTH_OFFSET 14 +#define TX_DESC_PACKET_TYPE_OFFSET 17 +#define TX_DESC_HOST_LENGTH_OFFSET 18 + + + +/////////////////////////////////////////////////////// +// Host-MAC interface +/////////////////////////////////////////////////////// + +#define TX_STATUS_SUCCESS 0x00 + +#define TX_FIRM_OWN 0x80 +#define TX_DONE 0x40 + + +#define TX_ERROR 0x01 + +#define TX_PACKET_TYPE_DATA 0x01 +#define TX_PACKET_TYPE_MGMT 0x02 + +#define ISR_EMPTY 0x00 // no bits set in ISR +#define ISR_TxCOMPLETE 0x01 // packet transmitted +#define ISR_RxCOMPLETE 0x02 // packet received +#define ISR_RxFRAMELOST 0x04 // Rx Frame lost +#define ISR_FATAL_ERROR 0x08 // Fatal error +#define ISR_COMMAND_COMPLETE 0x10 // command completed +#define ISR_OUT_OF_RANGE 0x20 // command completed +#define ISR_IBSS_MERGE 0x40 // (4.1.2.30): IBSS merge +#define ISR_GENERIC_IRQ 0x80 + + +#define Local_Mib_Type 0x01 +#define Mac_Address_Mib_Type 0x02 +#define Mac_Mib_Type 0x03 +#define Statistics_Mib_Type 0x04 +#define Mac_Mgmt_Mib_Type 0x05 +#define Mac_Wep_Mib_Type 0x06 +#define Phy_Mib_Type 0x07 +#define Multi_Domain_MIB 0x08 + +#define MAC_MGMT_MIB_CUR_BSSID_POS 14 +#define MAC_MIB_FRAG_THRESHOLD_POS 8 +#define MAC_MIB_RTS_THRESHOLD_POS 10 +#define MAC_MIB_SHORT_RETRY_POS 16 +#define MAC_MIB_LONG_RETRY_POS 17 +#define MAC_MIB_SHORT_RETRY_LIMIT_POS 16 +#define MAC_MGMT_MIB_BEACON_PER_POS 0 +#define MAC_MGMT_MIB_STATION_ID_POS 6 +#define MAC_MGMT_MIB_CUR_PRIVACY_POS 11 +#define MAC_MGMT_MIB_CUR_BSSID_POS 14 +#define MAC_MGMT_MIB_PS_MODE_POS 53 +#define MAC_MGMT_MIB_LISTEN_INTERVAL_POS 54 +#define MAC_MGMT_MIB_MULTI_DOMAIN_IMPLEMENTED 56 +#define MAC_MGMT_MIB_MULTI_DOMAIN_ENABLED 57 +#define PHY_MIB_CHANNEL_POS 14 +#define PHY_MIB_RATE_SET_POS 20 +#define PHY_MIB_REG_DOMAIN_POS 26 +#define LOCAL_MIB_AUTO_TX_RATE_POS 3 +#define LOCAL_MIB_SSID_SIZE 5 +#define LOCAL_MIB_TX_PROMISCUOUS_POS 6 +#define LOCAL_MIB_TX_MGMT_RATE_POS 7 +#define LOCAL_MIB_TX_CONTROL_RATE_POS 8 +#define LOCAL_MIB_PREAMBLE_TYPE 9 +#define MAC_ADDR_MIB_MAC_ADDR_POS 0 + + +#define CMD_Set_MIB_Vars 0x01 +#define CMD_Get_MIB_Vars 0x02 +#define CMD_Scan 0x03 +#define CMD_Join 0x04 +#define CMD_Start 0x05 +#define CMD_EnableRadio 0x06 +#define CMD_DisableRadio 0x07 +#define CMD_SiteSurvey 0x0B + +#define CMD_STATUS_IDLE 0x00 +#define CMD_STATUS_COMPLETE 0x01 +#define CMD_STATUS_UNKNOWN 0x02 +#define CMD_STATUS_INVALID_PARAMETER 0x03 +#define CMD_STATUS_FUNCTION_NOT_SUPPORTED 0x04 +#define CMD_STATUS_TIME_OUT 0x07 +#define CMD_STATUS_IN_PROGRESS 0x08 +#define CMD_STATUS_REJECTED_RADIO_OFF 0x09 +#define CMD_STATUS_HOST_ERROR 0xFF +#define CMD_STATUS_BUSY 0xFE + + +#define CMD_BLOCK_COMMAND_OFFSET 0 +#define CMD_BLOCK_STATUS_OFFSET 1 +#define CMD_BLOCK_PARAMETERS_OFFSET 4 + +#define SCAN_OPTIONS_SITE_SURVEY 0x80 + +#define MGMT_FRAME_BODY_OFFSET 24 +#define MAX_AUTHENTICATION_RETRIES 3 +#define MAX_ASSOCIATION_RETRIES 3 + +#define AUTHENTICATION_RESPONSE_TIME_OUT 1000 + +#define MAX_WIRELESS_BODY 2316 /* mtu is 2312, CRC is 4 */ +#define LOOP_RETRY_LIMIT 500000 + +#define ACTIVE_MODE 1 +#define PS_MODE 2 + +#define MAX_ENCRYPTION_KEYS 4 +#define MAX_ENCRYPTION_KEY_SIZE 40 + +/////////////////////////////////////////////////////////////////////////// +// 802.11 related definitions +/////////////////////////////////////////////////////////////////////////// + +// +// Regulatory Domains +// + +#define REG_DOMAIN_FCC 0x10 //Channels 1-11 USA +#define REG_DOMAIN_DOC 0x20 //Channel 1-11 Canada +#define REG_DOMAIN_ETSI 0x30 //Channel 1-13 Europe (ex Spain/France) +#define REG_DOMAIN_SPAIN 0x31 //Channel 10-11 Spain +#define REG_DOMAIN_FRANCE 0x32 //Channel 10-13 France +#define REG_DOMAIN_MKK 0x40 //Channel 14 Japan +#define REG_DOMAIN_MKK1 0x41 //Channel 1-14 Japan(MKK1) +#define REG_DOMAIN_ISRAEL 0x50 //Channel 3-9 ISRAEL + +#define BSS_TYPE_AD_HOC 1 +#define BSS_TYPE_INFRASTRUCTURE 2 + +#define SCAN_TYPE_ACTIVE 0 +#define SCAN_TYPE_PASSIVE 1 + +#define LONG_PREAMBLE 0 +#define SHORT_PREAMBLE 1 +#define AUTO_PREAMBLE 2 + +#define DATA_FRAME_WS_HEADER_SIZE 30 + +/* promiscuous mode control */ +#define PROM_MODE_OFF 0x0 +#define PROM_MODE_UNKNOWN 0x1 +#define PROM_MODE_CRC_FAILED 0x2 +#define PROM_MODE_DUPLICATED 0x4 +#define PROM_MODE_MGMT 0x8 +#define PROM_MODE_CTRL 0x10 +#define PROM_MODE_BAD_PROTOCOL 0x20 + + +#define IFACE_INT_STATUS_OFFSET 0 +#define IFACE_INT_MASK_OFFSET 1 +#define IFACE_LOCKOUT_HOST_OFFSET 2 +#define IFACE_LOCKOUT_MAC_OFFSET 3 +#define IFACE_FUNC_CTRL_OFFSET 28 +#define IFACE_MAC_STAT_OFFSET 30 +#define IFACE_GENERIC_INT_TYPE_OFFSET 32 + +#define CIPHER_SUITE_NONE 0 +#define CIPHER_SUITE_WEP_64 1 +#define CIPHER_SUITE_TKIP 2 +#define CIPHER_SUITE_AES 3 +#define CIPHER_SUITE_CCX 4 +#define CIPHER_SUITE_WEP_128 5 + +// +// IFACE MACROS & definitions +// +// + +// FuncCtrl field: +// +#define FUNC_CTRL_TxENABLE 0x10 +#define FUNC_CTRL_RxENABLE 0x20 +#define FUNC_CTRL_INIT_COMPLETE 0x01 + +/* A stub firmware image which reads the MAC address from NVRAM on the card. + For copyright information and source see the end of this file. */ +static u8 mac_reader[] = { + 0x06,0x00,0x00,0xea,0x04,0x00,0x00,0xea,0x03,0x00,0x00,0xea,0x02,0x00,0x00,0xea, + 0x01,0x00,0x00,0xea,0x00,0x00,0x00,0xea,0xff,0xff,0xff,0xea,0xfe,0xff,0xff,0xea, + 0xd3,0x00,0xa0,0xe3,0x00,0xf0,0x21,0xe1,0x0e,0x04,0xa0,0xe3,0x00,0x10,0xa0,0xe3, + 0x81,0x11,0xa0,0xe1,0x00,0x10,0x81,0xe3,0x00,0x10,0x80,0xe5,0x1c,0x10,0x90,0xe5, + 0x10,0x10,0xc1,0xe3,0x1c,0x10,0x80,0xe5,0x01,0x10,0xa0,0xe3,0x08,0x10,0x80,0xe5, + 0x02,0x03,0xa0,0xe3,0x00,0x10,0xa0,0xe3,0xb0,0x10,0xc0,0xe1,0xb4,0x10,0xc0,0xe1, + 0xb8,0x10,0xc0,0xe1,0xbc,0x10,0xc0,0xe1,0x56,0xdc,0xa0,0xe3,0x21,0x00,0x00,0xeb, + 0x0a,0x00,0xa0,0xe3,0x1a,0x00,0x00,0xeb,0x10,0x00,0x00,0xeb,0x07,0x00,0x00,0xeb, + 0x02,0x03,0xa0,0xe3,0x02,0x14,0xa0,0xe3,0xb4,0x10,0xc0,0xe1,0x4c,0x10,0x9f,0xe5, + 0xbc,0x10,0xc0,0xe1,0x10,0x10,0xa0,0xe3,0xb8,0x10,0xc0,0xe1,0xfe,0xff,0xff,0xea, + 0x00,0x40,0x2d,0xe9,0x00,0x20,0xa0,0xe3,0x02,0x3c,0xa0,0xe3,0x00,0x10,0xa0,0xe3, + 0x28,0x00,0x9f,0xe5,0x37,0x00,0x00,0xeb,0x00,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1, + 0x00,0x40,0x2d,0xe9,0x12,0x2e,0xa0,0xe3,0x06,0x30,0xa0,0xe3,0x00,0x10,0xa0,0xe3, + 0x02,0x04,0xa0,0xe3,0x2f,0x00,0x00,0xeb,0x00,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1, + 0x00,0x02,0x00,0x02,0x80,0x01,0x90,0xe0,0x01,0x00,0x00,0x0a,0x01,0x00,0x50,0xe2, + 0xfc,0xff,0xff,0xea,0x1e,0xff,0x2f,0xe1,0x80,0x10,0xa0,0xe3,0xf3,0x06,0xa0,0xe3, + 0x00,0x10,0x80,0xe5,0x00,0x10,0xa0,0xe3,0x00,0x10,0x80,0xe5,0x01,0x10,0xa0,0xe3, + 0x04,0x10,0x80,0xe5,0x00,0x10,0x80,0xe5,0x0e,0x34,0xa0,0xe3,0x1c,0x10,0x93,0xe5, + 0x02,0x1a,0x81,0xe3,0x1c,0x10,0x83,0xe5,0x58,0x11,0x9f,0xe5,0x30,0x10,0x80,0xe5, + 0x54,0x11,0x9f,0xe5,0x34,0x10,0x80,0xe5,0x38,0x10,0x80,0xe5,0x3c,0x10,0x80,0xe5, + 0x10,0x10,0x90,0xe5,0x08,0x00,0x90,0xe5,0x1e,0xff,0x2f,0xe1,0xf3,0x16,0xa0,0xe3, + 0x08,0x00,0x91,0xe5,0x05,0x00,0xa0,0xe3,0x0c,0x00,0x81,0xe5,0x10,0x00,0x91,0xe5, + 0x02,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0xff,0x00,0xa0,0xe3,0x0c,0x00,0x81,0xe5, + 0x10,0x00,0x91,0xe5,0x02,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0x08,0x00,0x91,0xe5, + 0x10,0x00,0x91,0xe5,0x01,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0x08,0x00,0x91,0xe5, + 0xff,0x00,0x00,0xe2,0x1e,0xff,0x2f,0xe1,0x30,0x40,0x2d,0xe9,0x00,0x50,0xa0,0xe1, + 0x03,0x40,0xa0,0xe1,0xa2,0x02,0xa0,0xe1,0x08,0x00,0x00,0xe2,0x03,0x00,0x80,0xe2, + 0xd8,0x10,0x9f,0xe5,0x00,0x00,0xc1,0xe5,0x01,0x20,0xc1,0xe5,0xe2,0xff,0xff,0xeb, + 0x01,0x00,0x10,0xe3,0xfc,0xff,0xff,0x1a,0x14,0x00,0xa0,0xe3,0xc4,0xff,0xff,0xeb, + 0x04,0x20,0xa0,0xe1,0x05,0x10,0xa0,0xe1,0x02,0x00,0xa0,0xe3,0x01,0x00,0x00,0xeb, + 0x30,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1,0x70,0x40,0x2d,0xe9,0xf3,0x46,0xa0,0xe3, + 0x00,0x30,0xa0,0xe3,0x00,0x00,0x50,0xe3,0x08,0x00,0x00,0x9a,0x8c,0x50,0x9f,0xe5, + 0x03,0x60,0xd5,0xe7,0x0c,0x60,0x84,0xe5,0x10,0x60,0x94,0xe5,0x02,0x00,0x16,0xe3, + 0xfc,0xff,0xff,0x0a,0x01,0x30,0x83,0xe2,0x00,0x00,0x53,0xe1,0xf7,0xff,0xff,0x3a, + 0xff,0x30,0xa0,0xe3,0x0c,0x30,0x84,0xe5,0x08,0x00,0x94,0xe5,0x10,0x00,0x94,0xe5, + 0x01,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0x08,0x00,0x94,0xe5,0x00,0x00,0xa0,0xe3, + 0x00,0x00,0x52,0xe3,0x0b,0x00,0x00,0x9a,0x10,0x50,0x94,0xe5,0x02,0x00,0x15,0xe3, + 0xfc,0xff,0xff,0x0a,0x0c,0x30,0x84,0xe5,0x10,0x50,0x94,0xe5,0x01,0x00,0x15,0xe3, + 0xfc,0xff,0xff,0x0a,0x08,0x50,0x94,0xe5,0x01,0x50,0xc1,0xe4,0x01,0x00,0x80,0xe2, + 0x02,0x00,0x50,0xe1,0xf3,0xff,0xff,0x3a,0xc8,0x00,0xa0,0xe3,0x98,0xff,0xff,0xeb, + 0x70,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1,0x01,0x0c,0x00,0x02,0x01,0x02,0x00,0x02, + 0x00,0x01,0x00,0x02 +}; + +struct atmel_private { + void *card; /* Bus dependent stucture varies for PCcard */ + int (*present_callback)(void *); /* And callback which uses it */ + char firmware_id[32]; + AtmelFWType firmware_type; + u8 *firmware; + int firmware_length; + struct timer_list management_timer; + struct net_device *dev; + struct device *sys_dev; + struct iw_statistics wstats; + struct net_device_stats stats; // device stats + spinlock_t irqlock, timerlock; // spinlocks + enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type; + enum { + CARD_TYPE_PARALLEL_FLASH, + CARD_TYPE_SPI_FLASH, + CARD_TYPE_EEPROM + } card_type; + int do_rx_crc; /* If we need to CRC incoming packets */ + int probe_crc; /* set if we don't yet know */ + int crc_ok_cnt, crc_ko_cnt; /* counters for probing */ + u16 rx_desc_head; + u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous; + u16 tx_free_mem, tx_buff_head, tx_buff_tail; + + u16 frag_seq, frag_len, frag_no; + u8 frag_source[6]; + + u8 wep_is_on, default_key, exclude_unencrypted, encryption_level; + u8 group_cipher_suite, pairwise_cipher_suite; + u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE]; + int wep_key_len[MAX_ENCRYPTION_KEYS]; + int use_wpa, radio_on_broken; /* firmware dependent stuff. */ + + u16 host_info_base; + struct host_info_struct { + /* NB this is matched to the hardware, don't change. */ + u8 volatile int_status; + u8 volatile int_mask; + u8 volatile lockout_host; + u8 volatile lockout_mac; + + u16 tx_buff_pos; + u16 tx_buff_size; + u16 tx_desc_pos; + u16 tx_desc_count; + + u16 rx_buff_pos; + u16 rx_buff_size; + u16 rx_desc_pos; + u16 rx_desc_count; + + u16 build_version; + u16 command_pos; + + u16 major_version; + u16 minor_version; + + u16 func_ctrl; + u16 mac_status; + u16 generic_IRQ_type; + u8 reserved[2]; + } host_info; + + enum { + STATION_STATE_SCANNING, + STATION_STATE_JOINNING, + STATION_STATE_AUTHENTICATING, + STATION_STATE_ASSOCIATING, + STATION_STATE_READY, + STATION_STATE_REASSOCIATING, + STATION_STATE_DOWN, + STATION_STATE_MGMT_ERROR + } station_state; + + int operating_mode, power_mode; + time_t last_qual; + int beacons_this_sec; + int channel; + int reg_domain, config_reg_domain; + int tx_rate; + int auto_tx_rate; + int rts_threshold; + int frag_threshold; + int long_retry, short_retry; + int preamble; + int default_beacon_period, beacon_period, listen_interval; + int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum; + int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt; + enum { + SITE_SURVEY_IDLE, + SITE_SURVEY_IN_PROGRESS, + SITE_SURVEY_COMPLETED + } site_survey_state; + time_t last_survey; + + int station_was_associated, station_is_associated; + int fast_scan; + + struct bss_info { + int channel; + int SSIDsize; + int RSSI; + int UsingWEP; + int preamble; + int beacon_period; + int BSStype; + u8 BSSID[6]; + u8 SSID[MAX_SSID_LENGTH]; + } BSSinfo[MAX_BSS_ENTRIES]; + int BSS_list_entries, current_BSS; + int connect_to_any_BSS; + int SSID_size, new_SSID_size; + u8 CurrentBSSID[6], BSSID[6]; + u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH]; + u64 last_beacon_timestamp; + u8 rx_buf[MAX_WIRELESS_BODY]; + +}; + +static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16}; + +static const struct { + int reg_domain; + int min, max; + char *name; +} channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" }, + { REG_DOMAIN_DOC, 1, 11, "Canada" }, + { REG_DOMAIN_ETSI, 1, 13, "Europe" }, + { REG_DOMAIN_SPAIN, 10, 11, "Spain" }, + { REG_DOMAIN_FRANCE, 10, 13, "France" }, + { REG_DOMAIN_MKK, 14, 14, "MKK" }, + { REG_DOMAIN_MKK1, 1, 14, "MKK1" }, + { REG_DOMAIN_ISRAEL, 3, 9, "Israel"} }; + +static void build_wpa_mib(struct atmel_private *priv); +static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len); +static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len); +static void atmel_set_gcr(struct net_device *dev, u16 mask); +static void atmel_clear_gcr(struct net_device *dev, u16 mask); +static int atmel_lock_mac(struct atmel_private *priv); +static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data); +static void atmel_command_irq(struct atmel_private *priv); +static int atmel_validate_channel(struct atmel_private *priv, int channel); +static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header, + u16 frame_len, u8 rssi); +static void atmel_management_timer(u_long a); +static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size); +static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size); +static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header, + u8 *body, int body_len); + +static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index); +static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data); +static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data); +static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len); +static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len); +static void atmel_scan(struct atmel_private *priv, int specific_ssid); +static void atmel_join_bss(struct atmel_private *priv, int bss_index); +static void atmel_smooth_qual(struct atmel_private *priv); +static void atmel_writeAR(struct net_device *dev, u16 data); +static int probe_atmel_card(struct net_device *dev); +static int reset_atmel_card(struct net_device *dev ); +static void atmel_enter_state(struct atmel_private *priv, int new_state); +int atmel_open (struct net_device *dev); + +static inline u16 atmel_hi(struct atmel_private *priv, u16 offset) +{ + return priv->host_info_base + offset; +} + +static inline u16 atmel_co(struct atmel_private *priv, u16 offset) +{ + return priv->host_info.command_pos + offset; +} + +static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc) +{ + return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset; +} + +static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc) +{ + return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset; +} + +static inline u8 atmel_read8(struct net_device *dev, u16 offset) +{ + return inb(dev->base_addr + offset); +} + +static inline void atmel_write8(struct net_device *dev, u16 offset, u8 data) +{ + outb(data, dev->base_addr + offset); +} + +static inline u16 atmel_read16(struct net_device *dev, u16 offset) +{ + return inw(dev->base_addr + offset); +} + +static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data) +{ + outw(data, dev->base_addr + offset); +} + +static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos) +{ + atmel_writeAR(priv->dev, pos); + return atmel_read8(priv->dev, DR); +} + +static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data) +{ + atmel_writeAR(priv->dev, pos); + atmel_write8(priv->dev, DR, data); +} + +static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos) +{ + atmel_writeAR(priv->dev, pos); + return atmel_read16(priv->dev, DR); +} + +static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data) +{ + atmel_writeAR(priv->dev, pos); + atmel_write16(priv->dev, DR, data); +} + +static const struct iw_handler_def atmel_handler_def; + +static void tx_done_irq(struct atmel_private *priv) +{ + int i; + + for (i = 0; + atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE && + i < priv->host_info.tx_desc_count; + i++) { + + u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head)); + u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head)); + u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head)); + + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head), 0); + + priv->tx_free_mem += msdu_size; + priv->tx_desc_free++; + + if (priv->tx_buff_head + msdu_size > (priv->host_info.tx_buff_pos + priv->host_info.tx_buff_size)) + priv->tx_buff_head = 0; + else + priv->tx_buff_head += msdu_size; + + if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1)) + priv->tx_desc_head++ ; + else + priv->tx_desc_head = 0; + + if (type == TX_PACKET_TYPE_DATA) { + if (status == TX_STATUS_SUCCESS) + priv->stats.tx_packets++; + else + priv->stats.tx_errors++; + netif_wake_queue(priv->dev); + } + } +} + +static u16 find_tx_buff(struct atmel_private *priv, u16 len) +{ + u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail; + + if (priv->tx_desc_free == 3 || priv->tx_free_mem < len) + return 0; + + if (bottom_free >= len) + return priv->host_info.tx_buff_pos + priv->tx_buff_tail; + + if (priv->tx_free_mem - bottom_free >= len) { + priv->tx_buff_tail = 0; + return priv->host_info.tx_buff_pos; + } + + return 0; +} + +static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 len, u16 buff, u8 type) +{ + atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff); + atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len); + if (!priv->use_wpa) + atmel_wmem16(priv, atmel_tx(priv, TX_DESC_HOST_LENGTH_OFFSET, priv->tx_desc_tail), len); + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_tail), type); + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RATE_OFFSET, priv->tx_desc_tail), priv->tx_rate); + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RETRY_OFFSET, priv->tx_desc_tail), 0); + if (priv->use_wpa) { + int cipher_type, cipher_length; + if (is_bcast) { + cipher_type = priv->group_cipher_suite; + if (cipher_type == CIPHER_SUITE_WEP_64 || + cipher_type == CIPHER_SUITE_WEP_128 ) + cipher_length = 8; + else if (cipher_type == CIPHER_SUITE_TKIP) + cipher_length = 12; + else if (priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_64 || + priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_128) { + cipher_type = priv->pairwise_cipher_suite; + cipher_length = 8; + } else { + cipher_type = CIPHER_SUITE_NONE; + cipher_length = 0; + } + } else { + cipher_type = priv->pairwise_cipher_suite; + if (cipher_type == CIPHER_SUITE_WEP_64 || + cipher_type == CIPHER_SUITE_WEP_128 ) + cipher_length = 8; + else if (cipher_type == CIPHER_SUITE_TKIP) + cipher_length = 12; + else if (priv->group_cipher_suite == CIPHER_SUITE_WEP_64 || + priv->group_cipher_suite == CIPHER_SUITE_WEP_128) { + cipher_type = priv->group_cipher_suite; + cipher_length = 8; + } else { + cipher_type = CIPHER_SUITE_NONE; + cipher_length = 0; + } + } + + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail), + cipher_type); + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail), + cipher_length); + } + atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_tail), 0x80000000L); + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_tail), TX_FIRM_OWN); + if (priv->tx_desc_previous != priv->tx_desc_tail) + atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0); + priv->tx_desc_previous = priv->tx_desc_tail; + if (priv->tx_desc_tail < (priv->host_info.tx_desc_count -1 )) + priv->tx_desc_tail++; + else + priv->tx_desc_tail = 0; + priv->tx_desc_free--; + priv->tx_free_mem -= len; + +} + +static int start_tx (struct sk_buff *skb, struct net_device *dev) +{ + struct atmel_private *priv = netdev_priv(dev); + struct ieee802_11_hdr header; + unsigned long flags; + u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; + u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; + + if (priv->card && priv->present_callback && + !(*priv->present_callback)(priv->card)) { + priv->stats.tx_errors++; + dev_kfree_skb(skb); + return 0; + } + + if (priv->station_state != STATION_STATE_READY) { + priv->stats.tx_errors++; + dev_kfree_skb(skb); + return 0; + } + + /* first ensure the timer func cannot run */ + spin_lock_bh(&priv->timerlock); + /* then stop the hardware ISR */ + spin_lock_irqsave(&priv->irqlock, flags); + /* nb doing the above in the opposite order will deadlock */ + + /* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the + 12 first bytes (containing DA/SA) and put them in the appropriate fields of + the Wireless Header. Thus the packet length is then the initial + 18 (+30-12) */ + + if (!(buff = find_tx_buff(priv, len + 18))) { + priv->stats.tx_dropped++; + spin_unlock_irqrestore(&priv->irqlock, flags); + spin_unlock_bh(&priv->timerlock); + netif_stop_queue(dev); + return 1; + } + + frame_ctl = IEEE802_11_FTYPE_DATA; + header.duration_id = 0; + header.seq_ctl = 0; + if (priv->wep_is_on) + frame_ctl |= IEEE802_11_FCTL_WEP; + if (priv->operating_mode == IW_MODE_ADHOC) { + memcpy(&header.addr1, skb->data, 6); + memcpy(&header.addr2, dev->dev_addr, 6); + memcpy(&header.addr3, priv->BSSID, 6); + } else { + frame_ctl |= IEEE802_11_FCTL_TODS; + memcpy(&header.addr1, priv->CurrentBSSID, 6); + memcpy(&header.addr2, dev->dev_addr, 6); + memcpy(&header.addr3, skb->data, 6); + } + + if (priv->use_wpa) + memcpy(&header.addr4, SNAP_RFC1024, 6); + + header.frame_ctl = cpu_to_le16(frame_ctl); + /* Copy the wireless header into the card */ + atmel_copy_to_card(dev, buff, (unsigned char *)&header, DATA_FRAME_WS_HEADER_SIZE); + /* Copy the packet sans its 802.3 header addresses which have been replaced */ + atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12); + priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE; + + /* low bit of first byte of destination tells us if broadcast */ + tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA); + dev->trans_start = jiffies; + priv->stats.tx_bytes += len; + + spin_unlock_irqrestore(&priv->irqlock, flags); + spin_unlock_bh(&priv->timerlock); + dev_kfree_skb(skb); + + return 0; +} + +static void atmel_transmit_management_frame(struct atmel_private *priv, + struct ieee802_11_hdr *header, + u8 *body, int body_len) +{ + u16 buff; + int len = MGMT_FRAME_BODY_OFFSET + body_len; + + if (!(buff = find_tx_buff(priv, len))) + return; + + atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET); + atmel_copy_to_card(priv->dev, buff + MGMT_FRAME_BODY_OFFSET, body, body_len); + priv->tx_buff_tail += len; + tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT); +} + +static void fast_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header, + u16 msdu_size, u16 rx_packet_loc, u32 crc) +{ + /* fast path: unfragmented packet copy directly into skbuf */ + u8 mac4[6]; + struct sk_buff *skb; + unsigned char *skbp; + + /* get the final, mac 4 header field, this tells us encapsulation */ + atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6); + msdu_size -= 6; + + if (priv->do_rx_crc) { + crc = crc32_le(crc, mac4, 6); + msdu_size -= 4; + } + + if (!(skb = dev_alloc_skb(msdu_size + 14))) { + priv->stats.rx_dropped++; + return; + } + + skb_reserve(skb, 2); + skbp = skb_put(skb, msdu_size + 12); + atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size); + + if (priv->do_rx_crc) { + u32 netcrc; + crc = crc32_le(crc, skbp + 12, msdu_size); + atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + 30 + msdu_size, 4); + if ((crc ^ 0xffffffff) != netcrc) { + priv->stats.rx_crc_errors++; + dev_kfree_skb(skb); + return; + } + } + + memcpy(skbp, header->addr1, 6); /* destination address */ + if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS) + memcpy(&skbp[6], header->addr3, 6); + else + memcpy(&skbp[6], header->addr2, 6); /* source address */ + + priv->dev->last_rx=jiffies; + skb->dev = priv->dev; + skb->protocol = eth_type_trans(skb, priv->dev); + skb->ip_summed = CHECKSUM_NONE; + netif_rx(skb); + priv->stats.rx_bytes += 12 + msdu_size; + priv->stats.rx_packets++; +} + +/* Test to see if the packet in card memory at packet_loc has a valid CRC + It doesn't matter that this is slow: it is only used to proble the first few packets. */ +static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) +{ + int i = msdu_size - 4; + u32 netcrc, crc = 0xffffffff; + + if (msdu_size < 4) + return 0; + + atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4); + + atmel_writeAR(priv->dev, packet_loc); + while (i--) { + u8 octet = atmel_read8(priv->dev, DR); + crc = crc32_le(crc, &octet, 1); + } + + return (crc ^ 0xffffffff) == netcrc; +} + +static void frag_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header, + u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags) +{ + u8 mac4[6]; + u8 source[6]; + struct sk_buff *skb; + + if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS) + memcpy(source, header->addr3, 6); + else + memcpy(source, header->addr2, 6); + + rx_packet_loc += 24; /* skip header */ + + if (priv->do_rx_crc) + msdu_size -= 4; + + if (frag_no == 0) { /* first fragment */ + atmel_copy_to_host(priv->dev, mac4, rx_packet_loc, 6); + msdu_size -= 6; + rx_packet_loc += 6; + + if (priv->do_rx_crc) + crc = crc32_le(crc, mac4, 6); + + priv->frag_seq = seq_no; + priv->frag_no = 1; + priv->frag_len = msdu_size; + memcpy(priv->frag_source, source, 6); + memcpy(&priv->rx_buf[6], source, 6); + memcpy(priv->rx_buf, header->addr1, 6); + + atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size); + + if (priv->do_rx_crc) { + u32 netcrc; + crc = crc32_le(crc, &priv->rx_buf[12], msdu_size); + atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4); + if ((crc ^ 0xffffffff) != netcrc) { + priv->stats.rx_crc_errors++; + memset(priv->frag_source, 0xff, 6); + } + } + + } else if (priv->frag_no == frag_no && + priv->frag_seq == seq_no && + memcmp(priv->frag_source, source, 6) == 0) { + + atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len], + rx_packet_loc, msdu_size); + if (priv->do_rx_crc) { + u32 netcrc; + crc = crc32_le(crc, + &priv->rx_buf[12 + priv->frag_len], + msdu_size); + atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4); + if ((crc ^ 0xffffffff) != netcrc) { + priv->stats.rx_crc_errors++; + memset(priv->frag_source, 0xff, 6); + more_frags = 1; /* don't send broken assembly */ + } + } + + priv->frag_len += msdu_size; + priv->frag_no++; + + if (!more_frags) { /* last one */ + memset(priv->frag_source, 0xff, 6); + if (!(skb = dev_alloc_skb(priv->frag_len + 14))) { + priv->stats.rx_dropped++; + } else { + skb_reserve(skb, 2); + memcpy(skb_put(skb, priv->frag_len + 12), + priv->rx_buf, + priv->frag_len + 12); + priv->dev->last_rx = jiffies; + skb->dev = priv->dev; + skb->protocol = eth_type_trans(skb, priv->dev); + skb->ip_summed = CHECKSUM_NONE; + netif_rx(skb); + priv->stats.rx_bytes += priv->frag_len + 12; + priv->stats.rx_packets++; + } + } + + } else + priv->wstats.discard.fragment++; +} + +static void rx_done_irq(struct atmel_private *priv) +{ + int i; + struct ieee802_11_hdr header; + + for (i = 0; + atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID && + i < priv->host_info.rx_desc_count; + i++) { + + u16 msdu_size, rx_packet_loc, frame_ctl, seq_control; + u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head)); + u32 crc = 0xffffffff; + + if (status != RX_STATUS_SUCCESS) { + if (status == 0xc1) /* determined by experiment */ + priv->wstats.discard.nwid++; + else + priv->stats.rx_errors++; + goto next; + } + + msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head)); + rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head)); + + if (msdu_size < 30) { + priv->stats.rx_errors++; + goto next; + } + + /* Get header as far as end of seq_ctl */ + atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24); + frame_ctl = le16_to_cpu(header.frame_ctl); + seq_control = le16_to_cpu(header.seq_ctl); + + /* probe for CRC use here if needed once five packets have arrived with + the same crc status, we assume we know what's happening and stop probing */ + if (priv->probe_crc) { + if (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP)) { + priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size); + } else { + priv->do_rx_crc = probe_crc(priv, rx_packet_loc + 24, msdu_size - 24); + } + if (priv->do_rx_crc) { + if (priv->crc_ok_cnt++ > 5) + priv->probe_crc = 0; + } else { + if (priv->crc_ko_cnt++ > 5) + priv->probe_crc = 0; + } + } + + /* don't CRC header when WEP in use */ + if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP))) { + crc = crc32_le(0xffffffff, (unsigned char *)&header, 24); + } + msdu_size -= 24; /* header */ + + if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_DATA) { + + int more_fragments = frame_ctl & IEEE802_11_FCTL_MOREFRAGS; + u8 packet_fragment_no = seq_control & IEEE802_11_SCTL_FRAG; + u16 packet_sequence_no = (seq_control & IEEE802_11_SCTL_SEQ) >> 4; + + if (!more_fragments && packet_fragment_no == 0 ) { + fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc); + } else { + frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc, + packet_sequence_no, packet_fragment_no, more_fragments); + } + } + + if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_MGMT) { + /* copy rest of packet into buffer */ + atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size); + + /* we use the same buffer for frag reassembly and control packets */ + memset(priv->frag_source, 0xff, 6); + + if (priv->do_rx_crc) { + /* last 4 octets is crc */ + msdu_size -= 4; + crc = crc32_le(crc, (unsigned char *)&priv->rx_buf, msdu_size); + if ((crc ^ 0xffffffff) != (*((u32 *)&priv->rx_buf[msdu_size]))) { + priv->stats.rx_crc_errors++; + goto next; + } + } + + atmel_management_frame(priv, &header, msdu_size, + atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head))); + } + + next: + /* release descriptor */ + atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED); + + if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1)) + priv->rx_desc_head++; + else + priv->rx_desc_head = 0; + } +} + +static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct atmel_private *priv = netdev_priv(dev); + u8 isr; + int i = -1; + static u8 irq_order[] = { + ISR_OUT_OF_RANGE, + ISR_RxCOMPLETE, + ISR_TxCOMPLETE, + ISR_RxFRAMELOST, + ISR_FATAL_ERROR, + ISR_COMMAND_COMPLETE, + ISR_IBSS_MERGE, + ISR_GENERIC_IRQ + }; + + + if (priv->card && priv->present_callback && + !(*priv->present_callback)(priv->card)) + return IRQ_HANDLED; + + /* In this state upper-level code assumes it can mess with + the card unhampered by interrupts which may change register state. + Note that even though the card shouldn't generate interrupts + the inturrupt line may be shared. This allows card setup + to go on without disabling interrupts for a long time. */ + if (priv->station_state == STATION_STATE_DOWN) + return IRQ_NONE; + + atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */ + + while (1) { + if (!atmel_lock_mac(priv)) { + /* failed to contact card */ + printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); + return IRQ_HANDLED; + } + + isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); + + if (!isr) { + atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */ + return i == -1 ? IRQ_NONE : IRQ_HANDLED; + } + + atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */ + + for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++) + if (isr & irq_order[i]) + break; + + if (!atmel_lock_mac(priv)) { + /* failed to contact card */ + printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); + return IRQ_HANDLED; + } + + isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET)); + isr ^= irq_order[i]; + atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr); + atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); + + switch (irq_order[i]) { + + case ISR_OUT_OF_RANGE: + if (priv->operating_mode == IW_MODE_INFRA && + priv->station_state == STATION_STATE_READY) { + priv->station_is_associated = 0; + atmel_scan(priv, 1); + } + break; + + case ISR_RxFRAMELOST: + priv->wstats.discard.misc++; + /* fall through */ + case ISR_RxCOMPLETE: + rx_done_irq(priv); + break; + + case ISR_TxCOMPLETE: + tx_done_irq(priv); + break; + + case ISR_FATAL_ERROR: + printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name); + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + break; + + case ISR_COMMAND_COMPLETE: + atmel_command_irq(priv); + break; + + case ISR_IBSS_MERGE: + atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, + priv->CurrentBSSID, 6); + /* The WPA stuff cares about the current AP address */ + if (priv->use_wpa) + build_wpa_mib(priv); + break; + case ISR_GENERIC_IRQ: + printk(KERN_INFO "%s: Generic_irq received.\n", dev->name); + break; + } + } +} + + +static struct net_device_stats *atmel_get_stats (struct net_device *dev) +{ + struct atmel_private *priv = netdev_priv(dev); + return &priv->stats; +} + +static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev) +{ + struct atmel_private *priv = netdev_priv(dev); + + /* update the link quality here in case we are seeing no beacons + at all to drive the process */ + atmel_smooth_qual(priv); + + priv->wstats.status = priv->station_state; + + if (priv->operating_mode == IW_MODE_INFRA) { + if (priv->station_state != STATION_STATE_READY) { + priv->wstats.qual.qual = 0; + priv->wstats.qual.level = 0; + priv->wstats.qual.updated = (IW_QUAL_QUAL_INVALID + | IW_QUAL_LEVEL_INVALID); + } + priv->wstats.qual.noise = 0; + priv->wstats.qual.updated |= IW_QUAL_NOISE_INVALID; + } else { + /* Quality levels cannot be determined in ad-hoc mode, + because we can 'hear' more that one remote station. */ + priv->wstats.qual.qual = 0; + priv->wstats.qual.level = 0; + priv->wstats.qual.noise = 0; + priv->wstats.qual.updated = IW_QUAL_QUAL_INVALID + | IW_QUAL_LEVEL_INVALID + | IW_QUAL_NOISE_INVALID; + priv->wstats.miss.beacon = 0; + } + + return (&priv->wstats); +} + +static int atmel_change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 68) || (new_mtu > 2312)) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +static int atmel_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + memcpy (dev->dev_addr, addr->sa_data, dev->addr_len); + return atmel_open(dev); +} + +EXPORT_SYMBOL(atmel_open); + +int atmel_open (struct net_device *dev) +{ + struct atmel_private *priv = netdev_priv(dev); + int i, channel; + + /* any scheduled timer is no longer needed and might screw things up.. */ + del_timer_sync(&priv->management_timer); + + /* Interrupts will not touch the card once in this state... */ + priv->station_state = STATION_STATE_DOWN; + + if (priv->new_SSID_size) { + memcpy(priv->SSID, priv->new_SSID, priv->new_SSID_size); + priv->SSID_size = priv->new_SSID_size; + priv->new_SSID_size = 0; + } + priv->BSS_list_entries = 0; + + priv->AuthenticationRequestRetryCnt = 0; + priv->AssociationRequestRetryCnt = 0; + priv->ReAssociationRequestRetryCnt = 0; + priv->CurrentAuthentTransactionSeqNum = 0x0001; + priv->ExpectedAuthentTransactionSeqNum = 0x0002; + + priv->site_survey_state = SITE_SURVEY_IDLE; + priv->station_is_associated = 0; + + if (!reset_atmel_card(dev)) + return -EAGAIN; + + if (priv->config_reg_domain) { + priv->reg_domain = priv->config_reg_domain; + atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain); + } else { + priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS); + for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) + if (priv->reg_domain == channel_table[i].reg_domain) + break; + if (i == sizeof(channel_table)/sizeof(channel_table[0])) { + priv->reg_domain = REG_DOMAIN_MKK1; + printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name); + } + } + + if ((channel = atmel_validate_channel(priv, priv->channel))) + priv->channel = channel; + + /* this moves station_state on.... */ + atmel_scan(priv, 1); + + atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */ + return 0; +} + +static int atmel_close (struct net_device *dev) +{ + struct atmel_private *priv = netdev_priv(dev); + + atmel_enter_state(priv, STATION_STATE_DOWN); + + if (priv->bus_type == BUS_TYPE_PCCARD) + atmel_write16(dev, GCR, 0x0060); + atmel_write16(dev, GCR, 0x0040); + return 0; +} + +static int atmel_validate_channel(struct atmel_private *priv, int channel) +{ + /* check that channel is OK, if so return zero, + else return suitable default channel */ + int i; + + for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) + if (priv->reg_domain == channel_table[i].reg_domain) { + if (channel >= channel_table[i].min && + channel <= channel_table[i].max) + return 0; + else + return channel_table[i].min; + } + return 0; +} + +static int atmel_proc_output (char *buf, struct atmel_private *priv) +{ + int i; + char *p = buf; + char *s, *r, *c; + + p += sprintf(p, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR); + + if (priv->station_state != STATION_STATE_DOWN) { + p += sprintf(p, "Firmware version:\t%d.%d build %d\nFirmware location:\t", + priv->host_info.major_version, + priv->host_info.minor_version, + priv->host_info.build_version); + + if (priv->card_type != CARD_TYPE_EEPROM) + p += sprintf(p, "on card\n"); + else if (priv->firmware) + p += sprintf(p, "%s loaded by host\n", priv->firmware_id); + else + p += sprintf(p, "%s loaded by hotplug\n", priv->firmware_id); + + switch(priv->card_type) { + case CARD_TYPE_PARALLEL_FLASH: c = "Parallel flash"; break; + case CARD_TYPE_SPI_FLASH: c = "SPI flash\n"; break; + case CARD_TYPE_EEPROM: c = "EEPROM"; break; + default: c = "<unknown>"; + } + + + r = "<unknown>"; + for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) + if (priv->reg_domain == channel_table[i].reg_domain) + r = channel_table[i].name; + + p += sprintf(p, "MAC memory type:\t%s\n", c); + p += sprintf(p, "Regulatory domain:\t%s\n", r); + p += sprintf(p, "Host CRC checking:\t%s\n", + priv->do_rx_crc ? "On" : "Off"); + p += sprintf(p, "WPA-capable firmware:\t%s\n", + priv->use_wpa ? "Yes" : "No"); + } + + switch(priv->station_state) { + case STATION_STATE_SCANNING: s = "Scanning"; break; + case STATION_STATE_JOINNING: s = "Joining"; break; + case STATION_STATE_AUTHENTICATING: s = "Authenticating"; break; + case STATION_STATE_ASSOCIATING: s = "Associating"; break; + case STATION_STATE_READY: s = "Ready"; break; + case STATION_STATE_REASSOCIATING: s = "Reassociating"; break; + case STATION_STATE_MGMT_ERROR: s = "Management error"; break; + case STATION_STATE_DOWN: s = "Down"; break; + default: s = "<unknown>"; + } + + p += sprintf(p, "Current state:\t\t%s\n", s); + return p - buf; +} + +static int atmel_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + struct atmel_private *priv = data; + int len = atmel_proc_output (page, priv); + if (len <= off+count) *eof = 1; + *start = page + off; + len -= off; + if (len>count) len = count; + if (len<0) len = 0; + return len; +} + +struct net_device *init_atmel_card( unsigned short irq, int port, const AtmelFWType fw_type, + struct device *sys_dev, int (*card_present)(void *), void *card) +{ + struct net_device *dev; + struct atmel_private *priv; + int rc; + + /* Create the network device object. */ + dev = alloc_etherdev(sizeof(*priv)); + if (!dev) { + printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n"); + return NULL; + } + if (dev_alloc_name(dev, dev->name) < 0) { + printk(KERN_ERR "atmel: Couldn't get name!\n"); + goto err_out_free; + } + + priv = netdev_priv(dev); + priv->dev = dev; + priv->sys_dev = sys_dev; + priv->present_callback = card_present; + priv->card = card; + priv->firmware = NULL; + priv->firmware_id[0] = '\0'; + priv->firmware_type = fw_type; + if (firmware) /* module parameter */ + strcpy(priv->firmware_id, firmware); + priv->bus_type = card_present ? BUS_TYPE_PCCARD : BUS_TYPE_PCI; + priv->station_state = STATION_STATE_DOWN; + priv->do_rx_crc = 0; + /* For PCMCIA cards, some chips need CRC, some don't + so we have to probe. */ + if (priv->bus_type == BUS_TYPE_PCCARD) { + priv->probe_crc = 1; + priv->crc_ok_cnt = priv->crc_ko_cnt = 0; + } else + priv->probe_crc = 0; + memset(&priv->stats, 0, sizeof(priv->stats)); + memset(&priv->wstats, 0, sizeof(priv->wstats)); + priv->last_qual = jiffies; + priv->last_beacon_timestamp = 0; + memset(priv->frag_source, 0xff, sizeof(priv->frag_source)); + memset(priv->BSSID, 0, 6); + priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */ + priv->station_was_associated = 0; + + priv->last_survey = jiffies; + priv->preamble = LONG_PREAMBLE; + priv->operating_mode = IW_MODE_INFRA; + priv->connect_to_any_BSS = 0; + priv->config_reg_domain = 0; + priv->reg_domain = 0; + priv->tx_rate = 3; + priv->auto_tx_rate = 1; + priv->channel = 4; + priv->power_mode = 0; + priv->SSID[0] = '\0'; + priv->SSID_size = 0; + priv->new_SSID_size = 0; + priv->frag_threshold = 2346; + priv->rts_threshold = 2347; + priv->short_retry = 7; + priv->long_retry = 4; + + priv->wep_is_on = 0; + priv->default_key = 0; + priv->encryption_level = 0; + priv->exclude_unencrypted = 0; + priv->group_cipher_suite = priv->pairwise_cipher_suite = CIPHER_SUITE_NONE; + priv->use_wpa = 0; + memset(priv->wep_keys, 0, sizeof(priv->wep_keys)); + memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); + + priv->default_beacon_period = priv->beacon_period = 100; + priv->listen_interval = 1; + + init_timer(&priv->management_timer); + spin_lock_init(&priv->irqlock); + spin_lock_init(&priv->timerlock); + priv->management_timer.function = atmel_management_timer; + priv->management_timer.data = (unsigned long) dev; + + dev->open = atmel_open; + dev->stop = atmel_close; + dev->change_mtu = atmel_change_mtu; + dev->set_mac_address = atmel_set_mac_address; + dev->hard_start_xmit = start_tx; + dev->get_stats = atmel_get_stats; + dev->get_wireless_stats = atmel_get_wireless_stats; + dev->wireless_handlers = (struct iw_handler_def *)&atmel_handler_def; + dev->do_ioctl = atmel_ioctl; + dev->irq = irq; + dev->base_addr = port; + + SET_NETDEV_DEV(dev, sys_dev); + + if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) { + printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc ); + goto err_out_free; + } + + if (priv->bus_type == BUS_TYPE_PCI && + !request_region( dev->base_addr, 64, dev->name )) { + goto err_out_irq; + } + + if (register_netdev(dev)) + goto err_out_res; + + if (!probe_atmel_card(dev)){ + unregister_netdev(dev); + goto err_out_res; + } + + netif_carrier_off(dev); + + create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); + + printk(KERN_INFO "%s: Atmel at76c50x wireless. Version %d.%d simon@thekelleys.org.uk\n", + dev->name, DRIVER_MAJOR, DRIVER_MINOR); + + SET_MODULE_OWNER(dev); + return dev; + + err_out_res: + if (priv->bus_type == BUS_TYPE_PCI) + release_region( dev->base_addr, 64 ); + err_out_irq: + free_irq(dev->irq, dev); + err_out_free: + free_netdev(dev); + return NULL; +} + +EXPORT_SYMBOL(init_atmel_card); + +void stop_atmel_card(struct net_device *dev, int freeres) +{ + struct atmel_private *priv = netdev_priv(dev); + + /* put a brick on it... */ + if (priv->bus_type == BUS_TYPE_PCCARD) + atmel_write16(dev, GCR, 0x0060); + atmel_write16(dev, GCR, 0x0040); + + del_timer_sync(&priv->management_timer); + unregister_netdev(dev); + remove_proc_entry("driver/atmel", NULL); + free_irq(dev->irq, dev); + if (priv->firmware) + kfree(priv->firmware); + if (freeres) { + /* PCMCIA frees this stuff, so only for PCI */ + release_region(dev->base_addr, 64); + } + free_netdev(dev); +} + +EXPORT_SYMBOL(stop_atmel_card); + +static int atmel_set_essid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + /* Check if we asked for `any' */ + if(dwrq->flags == 0) { + priv->connect_to_any_BSS = 1; + } else { + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + + priv->connect_to_any_BSS = 0; + + /* Check the size of the string */ + if (dwrq->length > MAX_SSID_LENGTH + 1) + return -E2BIG ; + if (index != 0) + return -EINVAL; + + memcpy(priv->new_SSID, extra, dwrq->length - 1); + priv->new_SSID_size = dwrq->length - 1; + } + + return -EINPROGRESS; +} + +static int atmel_get_essid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + /* Get the current SSID */ + if (priv->new_SSID_size != 0) { + memcpy(extra, priv->new_SSID, priv->new_SSID_size); + extra[priv->new_SSID_size] = '\0'; + dwrq->length = priv->new_SSID_size + 1; + } else { + memcpy(extra, priv->SSID, priv->SSID_size); + extra[priv->SSID_size] = '\0'; + dwrq->length = priv->SSID_size + 1; + } + + dwrq->flags = !priv->connect_to_any_BSS; /* active */ + + return 0; +} + +static int atmel_get_wap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *awrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + memcpy(awrq->sa_data, priv->CurrentBSSID, 6); + awrq->sa_family = ARPHRD_ETHER; + + return 0; +} + +static int atmel_set_encode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + /* Basic checking: do we have a key to set ? + * Note : with the new API, it's impossible to get a NULL pointer. + * Therefore, we need to check a key size == 0 instead. + * New version of iwconfig properly set the IW_ENCODE_NOKEY flag + * when no key is present (only change flags), but older versions + * don't do it. - Jean II */ + if (dwrq->length > 0) { + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int current_index = priv->default_key; + /* Check the size of the key */ + if (dwrq->length > 13) { + return -EINVAL; + } + /* Check the index (none -> use current) */ + if (index < 0 || index >= 4) + index = current_index; + else + priv->default_key = index; + /* Set the length */ + if (dwrq->length > 5) + priv->wep_key_len[index] = 13; + else + if (dwrq->length > 0) + priv->wep_key_len[index] = 5; + else + /* Disable the key */ + priv->wep_key_len[index] = 0; + /* Check if the key is not marked as invalid */ + if(!(dwrq->flags & IW_ENCODE_NOKEY)) { + /* Cleanup */ + memset(priv->wep_keys[index], 0, 13); + /* Copy the key in the driver */ + memcpy(priv->wep_keys[index], extra, dwrq->length); + } + /* WE specify that if a valid key is set, encryption + * should be enabled (user may turn it off later) + * This is also how "iwconfig ethX key on" works */ + if (index == current_index && + priv->wep_key_len[index] > 0) { + priv->wep_is_on = 1; + priv->exclude_unencrypted = 1; + if (priv->wep_key_len[index] > 5) { + priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64; + priv->encryption_level = 2; + } else { + priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128; + priv->encryption_level = 1; + } + } + } else { + /* Do we want to just set the transmit key index ? */ + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + if ( index>=0 && index < 4 ) { + priv->default_key = index; + } else + /* Don't complain if only change the mode */ + if(!dwrq->flags & IW_ENCODE_MODE) { + return -EINVAL; + } + } + /* Read the flags */ + if(dwrq->flags & IW_ENCODE_DISABLED) { + priv->wep_is_on = 0; + priv->encryption_level = 0; + priv->pairwise_cipher_suite = CIPHER_SUITE_NONE; + } else { + priv->wep_is_on = 1; + if (priv->wep_key_len[priv->default_key] > 5) { + priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128; + priv->encryption_level = 2; + } else { + priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64; + priv->encryption_level = 1; + } + } + if(dwrq->flags & IW_ENCODE_RESTRICTED) + priv->exclude_unencrypted = 1; + if(dwrq->flags & IW_ENCODE_OPEN) + priv->exclude_unencrypted = 0; + + return -EINPROGRESS; /* Call commit handler */ +} + + +static int atmel_get_encode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + + if (!priv->wep_is_on) + dwrq->flags = IW_ENCODE_DISABLED; + else if (priv->exclude_unencrypted) + dwrq->flags = IW_ENCODE_RESTRICTED; + else + dwrq->flags = IW_ENCODE_OPEN; + + /* Which key do we want ? -1 -> tx index */ + if (index < 0 || index >= 4) + index = priv->default_key; + dwrq->flags |= index + 1; + /* Copy the key to the user buffer */ + dwrq->length = priv->wep_key_len[index]; + if (dwrq->length > 16) { + dwrq->length=0; + } else { + memset(extra, 0, 16); + memcpy(extra, priv->wep_keys[index], dwrq->length); + } + + return 0; +} + +static int atmel_get_name(struct net_device *dev, + struct iw_request_info *info, + char *cwrq, + char *extra) +{ + strcpy(cwrq, "IEEE 802.11-DS"); + return 0; +} + +static int atmel_set_rate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + if (vwrq->fixed == 0) { + priv->tx_rate = 3; + priv->auto_tx_rate = 1; + } else { + priv->auto_tx_rate = 0; + + /* Which type of value ? */ + if((vwrq->value < 4) && (vwrq->value >= 0)) { + /* Setting by rate index */ + priv->tx_rate = vwrq->value; + } else { + /* Setting by frequency value */ + switch (vwrq->value) { + case 1000000: priv->tx_rate = 0; break; + case 2000000: priv->tx_rate = 1; break; + case 5500000: priv->tx_rate = 2; break; + case 11000000: priv->tx_rate = 3; break; + default: return -EINVAL; + } + } + } + + return -EINPROGRESS; +} + +static int atmel_set_mode(struct net_device *dev, + struct iw_request_info *info, + __u32 *uwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + if (*uwrq != IW_MODE_ADHOC && *uwrq != IW_MODE_INFRA) + return -EINVAL; + + priv->operating_mode = *uwrq; + return -EINPROGRESS; +} + +static int atmel_get_mode(struct net_device *dev, + struct iw_request_info *info, + __u32 *uwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + *uwrq = priv->operating_mode; + return 0; +} + +static int atmel_get_rate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + if (priv->auto_tx_rate) { + vwrq->fixed = 0; + vwrq->value = 11000000; + } else { + vwrq->fixed = 1; + switch(priv->tx_rate) { + case 0: vwrq->value = 1000000; break; + case 1: vwrq->value = 2000000; break; + case 2: vwrq->value = 5500000; break; + case 3: vwrq->value = 11000000; break; + } + } + return 0; +} + +static int atmel_set_power(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + priv->power_mode = vwrq->disabled ? 0 : 1; + return -EINPROGRESS; +} + +static int atmel_get_power(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + vwrq->disabled = priv->power_mode ? 0 : 1; + vwrq->flags = IW_POWER_ON; + return 0; +} + +static int atmel_set_retry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + if(!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) { + if(vwrq->flags & IW_RETRY_MAX) + priv->long_retry = vwrq->value; + else if (vwrq->flags & IW_RETRY_MIN) + priv->short_retry = vwrq->value; + else { + /* No modifier : set both */ + priv->long_retry = vwrq->value; + priv->short_retry = vwrq->value; + } + return -EINPROGRESS; + } + + return -EINVAL; +} + +static int atmel_get_retry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + vwrq->disabled = 0; /* Can't be disabled */ + + /* Note : by default, display the min retry number */ + if((vwrq->flags & IW_RETRY_MAX)) { + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + vwrq->value = priv->long_retry; + } else { + vwrq->flags = IW_RETRY_LIMIT; + vwrq->value = priv->short_retry; + if(priv->long_retry != priv->short_retry) + vwrq->flags |= IW_RETRY_MIN; + } + + return 0; +} + +static int atmel_set_rts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + int rthr = vwrq->value; + + if(vwrq->disabled) + rthr = 2347; + if((rthr < 0) || (rthr > 2347)) { + return -EINVAL; + } + priv->rts_threshold = rthr; + + return -EINPROGRESS; /* Call commit handler */ +} + +static int atmel_get_rts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + vwrq->value = priv->rts_threshold; + vwrq->disabled = (vwrq->value >= 2347); + vwrq->fixed = 1; + + return 0; +} + +static int atmel_set_frag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + int fthr = vwrq->value; + + if(vwrq->disabled) + fthr = 2346; + if((fthr < 256) || (fthr > 2346)) { + return -EINVAL; + } + fthr &= ~0x1; /* Get an even value - is it really needed ??? */ + priv->frag_threshold = fthr; + + return -EINPROGRESS; /* Call commit handler */ +} + +static int atmel_get_frag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + vwrq->value = priv->frag_threshold; + vwrq->disabled = (vwrq->value >= 2346); + vwrq->fixed = 1; + + return 0; +} + +static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; + +static int atmel_set_freq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *fwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + int rc = -EINPROGRESS; /* Call commit handler */ + + /* If setting by frequency, convert to a channel */ + if((fwrq->e == 1) && + (fwrq->m >= (int) 241200000) && + (fwrq->m <= (int) 248700000)) { + int f = fwrq->m / 100000; + int c = 0; + while((c < 14) && (f != frequency_list[c])) + c++; + /* Hack to fall through... */ + fwrq->e = 0; + fwrq->m = c + 1; + } + /* Setting by channel number */ + if((fwrq->m > 1000) || (fwrq->e > 0)) + rc = -EOPNOTSUPP; + else { + int channel = fwrq->m; + if (atmel_validate_channel(priv, channel) == 0) { + priv->channel = channel; + } else { + rc = -EINVAL; + } + } + return rc; +} + +static int atmel_get_freq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *fwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + + fwrq->m = priv->channel; + fwrq->e = 0; + return 0; +} + +static int atmel_set_scan(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + unsigned long flags; + + /* Note : you may have realised that, as this is a SET operation, + * this is privileged and therefore a normal user can't + * perform scanning. + * This is not an error, while the device perform scanning, + * traffic doesn't flow, so it's a perfect DoS... + * Jean II */ + + if (priv->station_state == STATION_STATE_DOWN) + return -EAGAIN; + + /* Timeout old surveys. */ + if ((jiffies - priv->last_survey) > (20 * HZ)) + priv->site_survey_state = SITE_SURVEY_IDLE; + priv->last_survey = jiffies; + + /* Initiate a scan command */ + if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS) + return -EBUSY; + + del_timer_sync(&priv->management_timer); + spin_lock_irqsave(&priv->irqlock, flags); + + priv->site_survey_state = SITE_SURVEY_IN_PROGRESS; + priv->fast_scan = 0; + atmel_scan(priv, 0); + spin_unlock_irqrestore(&priv->irqlock, flags); + + return 0; +} + +static int atmel_get_scan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + int i; + char *current_ev = extra; + struct iw_event iwe; + + if (priv->site_survey_state != SITE_SURVEY_COMPLETED) + return -EAGAIN; + + for(i=0; i<priv->BSS_list_entries; i++) { + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6); + current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN); + + iwe.u.data.length = priv->BSSinfo[i].SSIDsize; + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID); + + iwe.cmd = SIOCGIWMODE; + iwe.u.mode = priv->BSSinfo[i].BSStype; + current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); + + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = priv->BSSinfo[i].channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); + + iwe.cmd = SIOCGIWENCODE; + if (priv->BSSinfo[i].UsingWEP) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); + + } + + /* Length of data */ + dwrq->length = (current_ev - extra); + dwrq->flags = 0; + + return 0; +} + +static int atmel_get_range(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + struct iw_range *range = (struct iw_range *) extra; + int k,i,j; + + dwrq->length = sizeof(struct iw_range); + memset(range, 0, sizeof(range)); + range->min_nwid = 0x0000; + range->max_nwid = 0x0000; + range->num_channels = 0; + for (j = 0; j < sizeof(channel_table)/sizeof(channel_table[0]); j++) + if (priv->reg_domain == channel_table[j].reg_domain) { + range->num_channels = channel_table[j].max - channel_table[j].min + 1; + break; + } + if (range->num_channels != 0) { + for(k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) { + range->freq[k].i = i; /* List index */ + range->freq[k].m = frequency_list[i-1] * 100000; + range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */ + } + range->num_frequency = k; + } + + range->max_qual.qual = 100; + range->max_qual.level = 100; + range->max_qual.noise = 0; + range->max_qual.updated = IW_QUAL_NOISE_INVALID; + + range->avg_qual.qual = 50; + range->avg_qual.level = 50; + range->avg_qual.noise = 0; + range->avg_qual.updated = IW_QUAL_NOISE_INVALID; + + range->sensitivity = 0; + + range->bitrate[0] = 1000000; + range->bitrate[1] = 2000000; + range->bitrate[2] = 5500000; + range->bitrate[3] = 11000000; + range->num_bitrates = 4; + + range->min_rts = 0; + range->max_rts = 2347; + range->min_frag = 256; + range->max_frag = 2346; + + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; + range->num_encoding_sizes = 2; + range->max_encoding_tokens = 4; + + range->pmp_flags = IW_POWER_ON; + range->pmt_flags = IW_POWER_ON; + range->pm_capa = 0; + + range->we_version_source = WIRELESS_EXT; + range->we_version_compiled = WIRELESS_EXT; + range->retry_capa = IW_RETRY_LIMIT ; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = 0; + range->min_retry = 1; + range->max_retry = 65535; + + return 0; +} + +static int atmel_set_wap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *awrq, + char *extra) +{ + struct atmel_private *priv = netdev_priv(dev); + int i; + static const u8 bcast[] = { 255, 255, 255, 255, 255, 255 }; + unsigned long flags; + + if (awrq->sa_family != ARPHRD_ETHER) + return -EINVAL; + + if (memcmp(bcast, awrq->sa_data, 6) == 0) { + del_timer_sync(&priv->management_timer); + spin_lock_irqsave(&priv->irqlock, flags); + atmel_scan(priv, 1); + spin_unlock_irqrestore(&priv->irqlock, flags); + return 0; + } + + for(i=0; i<priv->BSS_list_entries; i++) { + if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) { + if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) { + return -EINVAL; + } else if (priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) { + return -EINVAL; + } else { + del_timer_sync(&priv->management_timer); + spin_lock_irqsave(&priv->irqlock, flags); + atmel_join_bss(priv, i); + spin_unlock_irqrestore(&priv->irqlock, flags); + return 0; + } + } + } + + return -EINVAL; +} + +static int atmel_config_commit(struct net_device *dev, + struct iw_request_info *info, /* NULL */ + void *zwrq, /* NULL */ + char *extra) /* NULL */ +{ + return atmel_open(dev); +} + +static const iw_handler atmel_handler[] = +{ + (iw_handler) atmel_config_commit, /* SIOCSIWCOMMIT */ + (iw_handler) atmel_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) atmel_set_freq, /* SIOCSIWFREQ */ + (iw_handler) atmel_get_freq, /* SIOCGIWFREQ */ + (iw_handler) atmel_set_mode, /* SIOCSIWMODE */ + (iw_handler) atmel_get_mode, /* SIOCGIWMODE */ + (iw_handler) NULL, /* SIOCSIWSENS */ + (iw_handler) NULL, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWRANGE */ + (iw_handler) atmel_get_range, /* SIOCGIWRANGE */ + (iw_handler) NULL, /* SIOCSIWPRIV */ + (iw_handler) NULL, /* SIOCGIWPRIV */ + (iw_handler) NULL, /* SIOCSIWSTATS */ + (iw_handler) NULL, /* SIOCGIWSTATS */ + (iw_handler) NULL, /* SIOCSIWSPY */ + (iw_handler) NULL, /* SIOCGIWSPY */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) atmel_set_wap, /* SIOCSIWAP */ + (iw_handler) atmel_get_wap, /* SIOCGIWAP */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* SIOCGIWAPLIST */ + (iw_handler) atmel_set_scan, /* SIOCSIWSCAN */ + (iw_handler) atmel_get_scan, /* SIOCGIWSCAN */ + (iw_handler) atmel_set_essid, /* SIOCSIWESSID */ + (iw_handler) atmel_get_essid, /* SIOCGIWESSID */ + (iw_handler) NULL, /* SIOCSIWNICKN */ + (iw_handler) NULL, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) atmel_set_rate, /* SIOCSIWRATE */ + (iw_handler) atmel_get_rate, /* SIOCGIWRATE */ + (iw_handler) atmel_set_rts, /* SIOCSIWRTS */ + (iw_handler) atmel_get_rts, /* SIOCGIWRTS */ + (iw_handler) atmel_set_frag, /* SIOCSIWFRAG */ + (iw_handler) atmel_get_frag, /* SIOCGIWFRAG */ + (iw_handler) NULL, /* SIOCSIWTXPOW */ + (iw_handler) NULL, /* SIOCGIWTXPOW */ + (iw_handler) atmel_set_retry, /* SIOCSIWRETRY */ + (iw_handler) atmel_get_retry, /* SIOCGIWRETRY */ + (iw_handler) atmel_set_encode, /* SIOCSIWENCODE */ + (iw_handler) atmel_get_encode, /* SIOCGIWENCODE */ + (iw_handler) atmel_set_power, /* SIOCSIWPOWER */ + (iw_handler) atmel_get_power, /* SIOCGIWPOWER */ +}; + + +static const iw_handler atmel_private_handler[] = +{ + NULL, /* SIOCIWFIRSTPRIV */ +}; + +typedef struct atmel_priv_ioctl { + char id[32]; + unsigned char __user *data; + unsigned short len; +} atmel_priv_ioctl; + + +#define ATMELFWL SIOCIWFIRSTPRIV +#define ATMELIDIFC ATMELFWL + 1 +#define ATMELRD ATMELFWL + 2 +#define ATMELMAGIC 0x51807 +#define REGDOMAINSZ 20 + +static const struct iw_priv_args atmel_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + { ATMELFWL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (atmel_priv_ioctl), IW_PRIV_TYPE_NONE, "atmelfwl" }, + { ATMELIDIFC, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "atmelidifc" }, + { ATMELRD, IW_PRIV_TYPE_CHAR | REGDOMAINSZ, IW_PRIV_TYPE_NONE, "regdomain" }, +}; + +static const struct iw_handler_def atmel_handler_def = +{ + .num_standard = sizeof(atmel_handler)/sizeof(iw_handler), + .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), + .standard = (iw_handler *) atmel_handler, + .private = (iw_handler *) atmel_private_handler, + .private_args = (struct iw_priv_args *) atmel_private_args +}; + +static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + int i, rc = 0; + struct atmel_private *priv = netdev_priv(dev); + atmel_priv_ioctl com; + struct iwreq *wrq = (struct iwreq *) rq; + unsigned char *new_firmware; + char domain[REGDOMAINSZ+1]; + + switch (cmd) { + case SIOCGIWPRIV: + if(wrq->u.data.pointer) { + /* Set the number of ioctl available */ + wrq->u.data.length = sizeof(atmel_private_args) / sizeof(atmel_private_args[0]); + + /* Copy structure to the user buffer */ + if (copy_to_user(wrq->u.data.pointer, + (u_char *) atmel_private_args, + sizeof(atmel_private_args))) + rc = -EFAULT; + } + break; + + case ATMELIDIFC: + wrq->u.param.value = ATMELMAGIC; + break; + + case ATMELFWL: + if (copy_from_user(&com, rq->ifr_data, sizeof(com))) { + rc = -EFAULT; + break; + } + + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + + if (!(new_firmware = kmalloc(com.len, GFP_KERNEL))) { + rc = -ENOMEM; + break; + } + + if (copy_from_user(new_firmware, com.data, com.len)) { + kfree(new_firmware); + rc = -EFAULT; + break; + } + + if (priv->firmware) + kfree(priv->firmware); + + priv->firmware = new_firmware; + priv->firmware_length = com.len; + strncpy(priv->firmware_id, com.id, 31); + priv->firmware_id[31] = '\0'; + break; + + case ATMELRD: + if (copy_from_user(domain, rq->ifr_data, REGDOMAINSZ)) { + rc = -EFAULT; + break; + } + + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + + domain[REGDOMAINSZ] = 0; + rc = -EINVAL; + for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) { + /* strcasecmp doesn't exist in the library */ + char *a = channel_table[i].name; + char *b = domain; + while (*a) { + char c1 = *a++; + char c2 = *b++; + if (tolower(c1) != tolower(c2)) + break; + } + if (!*a && !*b) { + priv->config_reg_domain = channel_table[i].reg_domain; + rc = 0; + } + } + + if (rc == 0 && priv->station_state != STATION_STATE_DOWN) + rc = atmel_open(dev); + break; + + default: + rc = -EOPNOTSUPP; + } + + return rc; +} + +struct auth_body { + u16 alg; + u16 trans_seq; + u16 status; + u8 el_id; + u8 chall_text_len; + u8 chall_text[253]; +}; + +static void atmel_enter_state(struct atmel_private *priv, int new_state) +{ + int old_state = priv->station_state; + + if (new_state == old_state) + return; + + priv->station_state = new_state; + + if (new_state == STATION_STATE_READY) { + netif_start_queue(priv->dev); + netif_carrier_on(priv->dev); + } + + if (old_state == STATION_STATE_READY) { + netif_carrier_off(priv->dev); + if (netif_running(priv->dev)) + netif_stop_queue(priv->dev); + priv->last_beacon_timestamp = 0; + } +} + +static void atmel_scan(struct atmel_private *priv, int specific_ssid) +{ + struct { + u8 BSSID[6]; + u8 SSID[MAX_SSID_LENGTH]; + u8 scan_type; + u8 channel; + u16 BSS_type; + u16 min_channel_time; + u16 max_channel_time; + u8 options; + u8 SSID_size; + } cmd; + + memset(cmd.BSSID, 0xff, 6); + + if (priv->fast_scan) { + cmd.SSID_size = priv->SSID_size; + memcpy(cmd.SSID, priv->SSID, priv->SSID_size); + cmd.min_channel_time = cpu_to_le16(10); + cmd.max_channel_time = cpu_to_le16(50); + } else { + priv->BSS_list_entries = 0; + cmd.SSID_size = 0; + cmd.min_channel_time = cpu_to_le16(10); + cmd.max_channel_time = cpu_to_le16(120); + } + + cmd.options = 0; + + if (!specific_ssid) + cmd.options |= SCAN_OPTIONS_SITE_SURVEY; + + cmd.channel = (priv->channel & 0x7f); + cmd.scan_type = SCAN_TYPE_ACTIVE; + cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ? + BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE); + + atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd)); + + /* This must come after all hardware access to avoid being messed up + by stuff happening in interrupt context after we leave STATE_DOWN */ + atmel_enter_state(priv, STATION_STATE_SCANNING); +} + +static void join(struct atmel_private *priv, int type) +{ + struct { + u8 BSSID[6]; + u8 SSID[MAX_SSID_LENGTH]; + u8 BSS_type; /* this is a short in a scan command - weird */ + u8 channel; + u16 timeout; + u8 SSID_size; + u8 reserved; + } cmd; + + cmd.SSID_size = priv->SSID_size; + memcpy(cmd.SSID, priv->SSID, priv->SSID_size); + memcpy(cmd.BSSID, priv->CurrentBSSID, 6); + cmd.channel = (priv->channel & 0x7f); + cmd.BSS_type = type; + cmd.timeout = cpu_to_le16(2000); + + atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd)); +} + + +static void start(struct atmel_private *priv, int type) +{ + struct { + u8 BSSID[6]; + u8 SSID[MAX_SSID_LENGTH]; + u8 BSS_type; + u8 channel; + u8 SSID_size; + u8 reserved[3]; + } cmd; + + cmd.SSID_size = priv->SSID_size; + memcpy(cmd.SSID, priv->SSID, priv->SSID_size); + memcpy(cmd.BSSID, priv->BSSID, 6); + cmd.BSS_type = type; + cmd.channel = (priv->channel & 0x7f); + + atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd)); +} + +static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 channel) +{ + int rejoin = 0; + int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + SHORT_PREAMBLE : LONG_PREAMBLE; + + if (priv->preamble != new) { + priv->preamble = new; + rejoin = 1; + atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new); + } + + if (priv->channel != channel) { + priv->channel = channel; + rejoin = 1; + atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel); + } + + if (rejoin) { + priv->station_is_associated = 0; + atmel_enter_state(priv, STATION_STATE_JOINNING); + + if (priv->operating_mode == IW_MODE_INFRA) + join(priv, BSS_TYPE_INFRASTRUCTURE); + else + join(priv, BSS_TYPE_AD_HOC); + } +} + + +static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len) +{ + struct ieee802_11_hdr header; + struct auth_body auth; + + header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT | IEEE802_11_STYPE_AUTH); + header.duration_id = cpu_to_le16(0x8000); + header.seq_ctl = 0; + memcpy(header.addr1, priv->CurrentBSSID, 6); + memcpy(header.addr2, priv->dev->dev_addr, 6); + memcpy(header.addr3, priv->CurrentBSSID, 6); + + if (priv->wep_is_on) { + auth.alg = cpu_to_le16(C80211_MGMT_AAN_SHAREDKEY); + /* no WEP for authentication frames with TrSeqNo 1 */ + if (priv->CurrentAuthentTransactionSeqNum != 1) + header.frame_ctl |= cpu_to_le16(IEEE802_11_FCTL_WEP); + } else { + auth.alg = cpu_to_le16(C80211_MGMT_AAN_OPENSYSTEM); + } + + auth.status = 0; + auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum); + priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1; + priv->CurrentAuthentTransactionSeqNum += 2; + + if (challenge_len != 0) { + auth.el_id = 16; /* challenge_text */ + auth.chall_text_len = challenge_len; + memcpy(auth.chall_text, challenge, challenge_len); + atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 8 + challenge_len); + } else { + atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 6); + } +} + +static void send_association_request(struct atmel_private *priv, int is_reassoc) +{ + u8 *ssid_el_p; + int bodysize; + struct ieee802_11_hdr header; + struct ass_req_format { + u16 capability; + u16 listen_interval; + u8 ap[6]; /* nothing after here directly accessible */ + u8 ssid_el_id; + u8 ssid_len; + u8 ssid[MAX_SSID_LENGTH]; + u8 sup_rates_el_id; + u8 sup_rates_len; + u8 rates[4]; + } body; + + header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT | + (is_reassoc ? IEEE802_11_STYPE_REASSOC_REQ : IEEE802_11_STYPE_ASSOC_REQ)); + header.duration_id = cpu_to_le16(0x8000); + header.seq_ctl = 0; + + memcpy(header.addr1, priv->CurrentBSSID, 6); + memcpy(header.addr2, priv->dev->dev_addr, 6); + memcpy(header.addr3, priv->CurrentBSSID, 6); + + body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS); + if (priv->wep_is_on) + body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_Privacy); + if (priv->preamble == SHORT_PREAMBLE) + body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble); + + body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period); + + /* current AP address - only in reassoc frame */ + if (is_reassoc) { + memcpy(body.ap, priv->CurrentBSSID, 6); + ssid_el_p = (u8 *)&body.ssid_el_id; + bodysize = 18 + priv->SSID_size; + } else { + ssid_el_p = (u8 *)&body.ap[0]; + bodysize = 12 + priv->SSID_size; + } + + ssid_el_p[0]= C80211_MGMT_ElementID_SSID; + ssid_el_p[1] = priv->SSID_size; + memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size); + ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates; + ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */ + memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4); + + atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize); +} + +static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee802_11_hdr *header) +{ + if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS) + return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0; + else + return memcmp(header->addr2, priv->CurrentBSSID, 6) == 0; +} + +static int retrieve_bss(struct atmel_private *priv) +{ + int i; + int max_rssi = -128; + int max_index = -1; + + if (priv->BSS_list_entries == 0) + return -1; + + if (priv->connect_to_any_BSS) { + /* Select a BSS with the max-RSSI but of the same type and of the same WEP mode + and that it is not marked as 'bad' (i.e. we had previously failed to connect to + this BSS with the settings that we currently use) */ + priv->current_BSS = 0; + for(i=0; i<priv->BSS_list_entries; i++) { + if (priv->operating_mode == priv->BSSinfo[i].BSStype && + ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) || + (priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) && + !(priv->BSSinfo[i].channel & 0x80)) { + max_rssi = priv->BSSinfo[i].RSSI; + priv->current_BSS = max_index = i; + } + + } + return max_index; + } + + for(i=0; i<priv->BSS_list_entries; i++) { + if (priv->SSID_size == priv->BSSinfo[i].SSIDsize && + memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 && + priv->operating_mode == priv->BSSinfo[i].BSStype && + atmel_validate_channel(priv, priv->BSSinfo[i].channel) == 0) { + if (priv->BSSinfo[i].RSSI >= max_rssi) { + max_rssi = priv->BSSinfo[i].RSSI; + max_index = i; + } + } + } + return max_index; +} + + +static void store_bss_info(struct atmel_private *priv, struct ieee802_11_hdr *header, + u16 capability, u16 beacon_period, u8 channel, u8 rssi, + u8 ssid_len, u8 *ssid, int is_beacon) +{ + u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3; + int i, index; + + for (index = -1, i = 0; i < priv->BSS_list_entries; i++) + if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0) + index = i; + + /* If we process a probe and an entry from this BSS exists + we will update the BSS entry with the info from this BSS. + If we process a beacon we will only update RSSI */ + + if (index == -1) { + if (priv->BSS_list_entries == MAX_BSS_ENTRIES) + return; + index = priv->BSS_list_entries++; + memcpy(priv->BSSinfo[index].BSSID, bss, 6); + priv->BSSinfo[index].RSSI = rssi; + } else { + if (rssi > priv->BSSinfo[index].RSSI) + priv->BSSinfo[index].RSSI = rssi; + if (is_beacon) + return; + } + + priv->BSSinfo[index].channel = channel; + priv->BSSinfo[index].beacon_period = beacon_period; + priv->BSSinfo[index].UsingWEP = capability & C80211_MGMT_CAPABILITY_Privacy; + memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len); + priv->BSSinfo[index].SSIDsize = ssid_len; + + if (capability & C80211_MGMT_CAPABILITY_IBSS) + priv->BSSinfo[index].BSStype = IW_MODE_ADHOC; + else if (capability & C80211_MGMT_CAPABILITY_ESS) + priv->BSSinfo[index].BSStype =IW_MODE_INFRA; + + priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + SHORT_PREAMBLE : LONG_PREAMBLE; +} + +static void authenticate(struct atmel_private *priv, u16 frame_len) +{ + struct auth_body *auth = (struct auth_body *)priv->rx_buf; + u16 status = le16_to_cpu(auth->status); + u16 trans_seq_no = le16_to_cpu(auth->trans_seq); + + if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) { + /* no WEP */ + if (priv->station_was_associated) { + atmel_enter_state(priv, STATION_STATE_REASSOCIATING); + send_association_request(priv, 1); + return; + } else { + atmel_enter_state(priv, STATION_STATE_ASSOCIATING); + send_association_request(priv, 0); + return; + } + } + + if (status == C80211_MGMT_SC_Success && priv->wep_is_on) { + /* WEP */ + if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum) + return; + + if (trans_seq_no == 0x0002 && + auth->el_id == C80211_MGMT_ElementID_ChallengeText) { + send_authentication_request(priv, auth->chall_text, auth->chall_text_len); + return; + } + + if (trans_seq_no == 0x0004) { + if(priv->station_was_associated) { + atmel_enter_state(priv, STATION_STATE_REASSOCIATING); + send_association_request(priv, 1); + return; + } else { + atmel_enter_state(priv, STATION_STATE_ASSOCIATING); + send_association_request(priv, 0); + return; + } + } + } + + if (status == C80211_MGMT_SC_AuthAlgNotSupported && priv->connect_to_any_BSS) { + int bss_index; + + priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; + + if ((bss_index = retrieve_bss(priv)) != -1) { + atmel_join_bss(priv, bss_index); + return; + } + } + + + priv->AuthenticationRequestRetryCnt = 0; + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; +} + +static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) +{ + struct ass_resp_format { + u16 capability; + u16 status; + u16 ass_id; + u8 el_id; + u8 length; + u8 rates[4]; + } *ass_resp = (struct ass_resp_format *)priv->rx_buf; + + u16 status = le16_to_cpu(ass_resp->status); + u16 ass_id = le16_to_cpu(ass_resp->ass_id); + u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length; + + if (frame_len < 8 + rates_len) + return; + + if (status == C80211_MGMT_SC_Success) { + if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE) + priv->AssociationRequestRetryCnt = 0; + else + priv->ReAssociationRequestRetryCnt = 0; + + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff); + atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len); + if (priv->power_mode == 0) { + priv->listen_interval = 1; + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + } else { + priv->listen_interval = 2; + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, PS_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2); + } + + priv->station_is_associated = 1; + priv->station_was_associated = 1; + atmel_enter_state(priv, STATION_STATE_READY); + return; + } + + if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE && + status != C80211_MGMT_SC_AssDeniedBSSRate && + status != C80211_MGMT_SC_SupportCapabilities && + priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) { + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + priv->AssociationRequestRetryCnt++; + send_association_request(priv, 0); + return; + } + + if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE && + status != C80211_MGMT_SC_AssDeniedBSSRate && + status != C80211_MGMT_SC_SupportCapabilities && + priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) { + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + priv->ReAssociationRequestRetryCnt++; + send_association_request(priv, 1); + return; + } + + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + + if(priv->connect_to_any_BSS) { + int bss_index; + priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; + + if ((bss_index = retrieve_bss(priv)) != -1) + atmel_join_bss(priv, bss_index); + + } +} + +void atmel_join_bss(struct atmel_private *priv, int bss_index) +{ + struct bss_info *bss = &priv->BSSinfo[bss_index]; + + memcpy(priv->CurrentBSSID, bss->BSSID, 6); + memcpy(priv->SSID, bss->SSID, priv->SSID_size = bss->SSIDsize); + + /* The WPA stuff cares about the current AP address */ + if (priv->use_wpa) + build_wpa_mib(priv); + + /* When switching to AdHoc turn OFF Power Save if needed */ + + if (bss->BSStype == IW_MODE_ADHOC && + priv->operating_mode != IW_MODE_ADHOC && + priv->power_mode) { + priv->power_mode = 0; + priv->listen_interval = 1; + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + } + + priv->operating_mode = bss->BSStype; + priv->channel = bss->channel & 0x7f; + priv->beacon_period = bss->beacon_period; + + if (priv->preamble != bss->preamble) { + priv->preamble = bss->preamble; + atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, bss->preamble); + } + + if (!priv->wep_is_on && bss->UsingWEP) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + return; + } + + if (priv->wep_is_on && !bss->UsingWEP) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + return; + } + + atmel_enter_state(priv, STATION_STATE_JOINNING); + + if (priv->operating_mode == IW_MODE_INFRA) + join(priv, BSS_TYPE_INFRASTRUCTURE); + else + join(priv, BSS_TYPE_AD_HOC); +} + + +static void restart_search(struct atmel_private *priv) +{ + int bss_index; + + if (!priv->connect_to_any_BSS) { + atmel_scan(priv, 1); + } else { + priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; + + if ((bss_index = retrieve_bss(priv)) != -1) + atmel_join_bss(priv, bss_index); + else + atmel_scan(priv, 0); + + } +} + +static void smooth_rssi(struct atmel_private *priv, u8 rssi) +{ + u8 old = priv->wstats.qual.level; + u8 max_rssi = 42; /* 502-rmfd-revd max by experiment, default for now */ + + switch (priv->firmware_type) { + case ATMEL_FW_TYPE_502E: + max_rssi = 63; /* 502-rmfd-reve max by experiment */ + break; + default: + break; + } + + rssi = rssi * 100 / max_rssi; + if((rssi + old) % 2) + priv->wstats.qual.level = ((rssi + old)/2) + 1; + else + priv->wstats.qual.level = ((rssi + old)/2); + priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED; + priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID; +} + +static void atmel_smooth_qual(struct atmel_private *priv) +{ + unsigned long time_diff = (jiffies - priv->last_qual)/HZ; + while (time_diff--) { + priv->last_qual += HZ; + priv->wstats.qual.qual = priv->wstats.qual.qual/2; + priv->wstats.qual.qual += + priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000; + priv->beacons_this_sec = 0; + } + priv->wstats.qual.updated |= IW_QUAL_QUAL_UPDATED; + priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID; +} + +/* deals with incoming managment frames. */ +static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header, + u16 frame_len, u8 rssi) +{ + u16 subtype; + + switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_STYPE) { + case C80211_SUBTYPE_MGMT_BEACON : + case C80211_SUBTYPE_MGMT_ProbeResponse: + + /* beacon frame has multiple variable-length fields - + never let an engineer loose with a data structure design. */ + { + struct beacon_format { + u64 timestamp; + u16 interval; + u16 capability; + u8 ssid_el_id; + u8 ssid_length; + /* ssid here */ + u8 rates_el_id; + u8 rates_length; + /* rates here */ + u8 ds_el_id; + u8 ds_length; + /* ds here */ + } *beacon = (struct beacon_format *)priv->rx_buf; + + u8 channel, rates_length, ssid_length; + u64 timestamp = le64_to_cpu(beacon->timestamp); + u16 beacon_interval = le16_to_cpu(beacon->interval); + u16 capability = le16_to_cpu(beacon->capability); + u8 *beaconp = priv->rx_buf; + ssid_length = beacon->ssid_length; + /* this blows chunks. */ + if (frame_len < 14 || frame_len < ssid_length + 15) + return; + rates_length = beaconp[beacon->ssid_length + 15]; + if (frame_len < ssid_length + rates_length + 18) + return; + if (ssid_length > MAX_SSID_LENGTH) + return; + channel = beaconp[ssid_length + rates_length + 18]; + + if (priv->station_state == STATION_STATE_READY) { + smooth_rssi(priv, rssi); + if (is_frame_from_current_bss(priv, header)) { + priv->beacons_this_sec++; + atmel_smooth_qual(priv); + if (priv->last_beacon_timestamp) { + /* Note truncate this to 32 bits - kernel can't divide a long long */ + u32 beacon_delay = timestamp - priv->last_beacon_timestamp; + int beacons = beacon_delay / (beacon_interval * 1000); + if (beacons > 1) + priv->wstats.miss.beacon += beacons - 1; + } + priv->last_beacon_timestamp = timestamp; + handle_beacon_probe(priv, capability, channel); + } + } + + if (priv->station_state == STATION_STATE_SCANNING ) + store_bss_info(priv, header, capability, beacon_interval, channel, + rssi, ssid_length, &beacon->rates_el_id, + subtype == C80211_SUBTYPE_MGMT_BEACON) ; + } + break; + + case C80211_SUBTYPE_MGMT_Authentication: + + if (priv->station_state == STATION_STATE_AUTHENTICATING) + authenticate(priv, frame_len); + + break; + + case C80211_SUBTYPE_MGMT_ASS_RESPONSE: + case C80211_SUBTYPE_MGMT_REASS_RESPONSE: + + if (priv->station_state == STATION_STATE_ASSOCIATING || + priv->station_state == STATION_STATE_REASSOCIATING) + associate(priv, frame_len, subtype); + + break; + + case C80211_SUBTYPE_MGMT_DISASSOSIATION: + if (priv->station_is_associated && + priv->operating_mode == IW_MODE_INFRA && + is_frame_from_current_bss(priv, header)) { + priv->station_was_associated = 0; + priv->station_is_associated = 0; + + atmel_enter_state(priv, STATION_STATE_JOINNING); + join(priv, BSS_TYPE_INFRASTRUCTURE); + } + + break; + + case C80211_SUBTYPE_MGMT_Deauthentication: + if (priv->operating_mode == IW_MODE_INFRA && + is_frame_from_current_bss(priv, header)) { + priv->station_was_associated = 0; + + atmel_enter_state(priv, STATION_STATE_JOINNING); + join(priv, BSS_TYPE_INFRASTRUCTURE); + } + + break; + } +} + +/* run when timer expires */ +static void atmel_management_timer(u_long a) +{ + struct net_device *dev = (struct net_device *) a; + struct atmel_private *priv = netdev_priv(dev); + unsigned long flags; + + /* Check if the card has been yanked. */ + if (priv->card && priv->present_callback && + !(*priv->present_callback)(priv->card)) + return; + + spin_lock_irqsave(&priv->irqlock, flags); + + switch (priv->station_state) { + + case STATION_STATE_AUTHENTICATING: + if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->AuthenticationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->AuthenticationRequestRetryCnt++; + priv->CurrentAuthentTransactionSeqNum = 0x0001; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_authentication_request(priv, NULL, 0); + } + + break; + + case STATION_STATE_ASSOCIATING: + if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->AssociationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->AssociationRequestRetryCnt++; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_association_request(priv, 0); + } + + break; + + case STATION_STATE_REASSOCIATING: + if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->ReAssociationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->ReAssociationRequestRetryCnt++; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_association_request(priv, 1); + } + + break; + + default: + break; + } + + spin_unlock_irqrestore(&priv->irqlock, flags); +} + +static void atmel_command_irq(struct atmel_private *priv) +{ + u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET)); + u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET)); + int fast_scan; + + if (status == CMD_STATUS_IDLE || + status == CMD_STATUS_IN_PROGRESS) + return; + + switch (command){ + + case CMD_Start: + if (status == CMD_STATUS_COMPLETE) { + priv->station_was_associated = priv->station_is_associated; + atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, + (u8 *)priv->CurrentBSSID, 6); + atmel_enter_state(priv, STATION_STATE_READY); + } + break; + + case CMD_Scan: + fast_scan = priv->fast_scan; + priv->fast_scan = 0; + + if (status != CMD_STATUS_COMPLETE) { + atmel_scan(priv, 1); + } else { + int bss_index = retrieve_bss(priv); + if (bss_index != -1) { + atmel_join_bss(priv, bss_index); + } else if (priv->operating_mode == IW_MODE_ADHOC && + priv->SSID_size != 0) { + start(priv, BSS_TYPE_AD_HOC); + } else { + priv->fast_scan = !fast_scan; + atmel_scan(priv, 1); + } + priv->site_survey_state = SITE_SURVEY_COMPLETED; + } + break; + + case CMD_SiteSurvey: + priv->fast_scan = 0; + + if (status != CMD_STATUS_COMPLETE) + return; + + priv->site_survey_state = SITE_SURVEY_COMPLETED; + if (priv->station_is_associated) { + atmel_enter_state(priv, STATION_STATE_READY); + } else { + atmel_scan(priv, 1); + } + break; + + case CMD_Join: + if (status == CMD_STATUS_COMPLETE) { + if (priv->operating_mode == IW_MODE_ADHOC) { + priv->station_was_associated = priv->station_is_associated; + atmel_enter_state(priv, STATION_STATE_READY); + } else { + priv->AuthenticationRequestRetryCnt = 0; + atmel_enter_state(priv, STATION_STATE_AUTHENTICATING); + + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + priv->CurrentAuthentTransactionSeqNum = 0x0001; + send_authentication_request(priv, NULL, 0); + } + return; + } + + atmel_scan(priv, 1); + + } +} + +static int atmel_wakeup_firmware(struct atmel_private *priv) +{ + struct host_info_struct *iface = &priv->host_info; + u16 mr1, mr3; + int i; + + if (priv->card_type == CARD_TYPE_SPI_FLASH) + atmel_set_gcr(priv->dev, GCR_REMAP); + + /* wake up on-board processor */ + atmel_clear_gcr(priv->dev, 0x0040); + atmel_write16(priv->dev, BSR, BSS_SRAM); + + if (priv->card_type == CARD_TYPE_SPI_FLASH) + mdelay(100); + + /* and wait for it */ + for (i = LOOP_RETRY_LIMIT; i; i--) { + mr1 = atmel_read16(priv->dev, MR1); + mr3 = atmel_read16(priv->dev, MR3); + + if (mr3 & MAC_BOOT_COMPLETE) + break; + if (mr1 & MAC_BOOT_COMPLETE && + priv->bus_type == BUS_TYPE_PCCARD) + break; + } + + if (i == 0) { + printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name); + return 0; + } + + if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) { + printk(KERN_ALERT "%s: card missing.\n", priv->dev->name); + return 0; + } + + /* now check for completion of MAC initialization through + the FunCtrl field of the IFACE, poll MR1 to detect completion of + MAC initialization, check completion status, set interrupt mask, + enables interrupts and calls Tx and Rx initialization functions */ + + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE); + + for (i = LOOP_RETRY_LIMIT; i; i--) { + mr1 = atmel_read16(priv->dev, MR1); + mr3 = atmel_read16(priv->dev, MR3); + + if (mr3 & MAC_INIT_COMPLETE) + break; + if (mr1 & MAC_INIT_COMPLETE && + priv->bus_type == BUS_TYPE_PCCARD) + break; + } + + if (i == 0) { + printk(KERN_ALERT "%s: MAC failed to initialise.\n", priv->dev->name); + return 0; + } + + /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */ + if ((mr3 & MAC_INIT_COMPLETE) && + !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) { + printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name); + return 0; + } + if ((mr1 & MAC_INIT_COMPLETE) && + !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) { + printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name); + return 0; + } + + atmel_copy_to_host(priv->dev, (unsigned char *)iface, + priv->host_info_base, sizeof(*iface)); + + iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos); + iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size); + iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos); + iface->tx_desc_count = le16_to_cpu(iface->tx_desc_count); + iface->rx_buff_pos = le16_to_cpu(iface->rx_buff_pos); + iface->rx_buff_size = le16_to_cpu(iface->rx_buff_size); + iface->rx_desc_pos = le16_to_cpu(iface->rx_desc_pos); + iface->rx_desc_count = le16_to_cpu(iface->rx_desc_count); + iface->build_version = le16_to_cpu(iface->build_version); + iface->command_pos = le16_to_cpu(iface->command_pos); + iface->major_version = le16_to_cpu(iface->major_version); + iface->minor_version = le16_to_cpu(iface->minor_version); + iface->func_ctrl = le16_to_cpu(iface->func_ctrl); + iface->mac_status = le16_to_cpu(iface->mac_status); + + return 1; +} + +/* determine type of memory and MAC address */ +static int probe_atmel_card(struct net_device *dev) +{ + int rc = 0; + struct atmel_private *priv = netdev_priv(dev); + + /* reset pccard */ + if (priv->bus_type == BUS_TYPE_PCCARD) + atmel_write16(dev, GCR, 0x0060); + + atmel_write16(dev, GCR, 0x0040); + mdelay(500); + + if (atmel_read16(dev, MR2) == 0) { + /* No stored firmware so load a small stub which just + tells us the MAC address */ + int i; + priv->card_type = CARD_TYPE_EEPROM; + atmel_write16(dev, BSR, BSS_IRAM); + atmel_copy_to_card(dev, 0, mac_reader, sizeof(mac_reader)); + atmel_set_gcr(dev, GCR_REMAP); + atmel_clear_gcr(priv->dev, 0x0040); + atmel_write16(dev, BSR, BSS_SRAM); + for (i = LOOP_RETRY_LIMIT; i; i--) + if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE) + break; + if (i == 0) { + printk(KERN_ALERT "%s: MAC failed to boot MAC address reader.\n", dev->name); + } else { + atmel_copy_to_host(dev, dev->dev_addr, atmel_read16(dev, MR2), 6); + /* got address, now squash it again until the network + interface is opened */ + if (priv->bus_type == BUS_TYPE_PCCARD) + atmel_write16(dev, GCR, 0x0060); + atmel_write16(dev, GCR, 0x0040); + rc = 1; + } + } else if (atmel_read16(dev, MR4) == 0) { + /* Mac address easy in this case. */ + priv->card_type = CARD_TYPE_PARALLEL_FLASH; + atmel_write16(dev, BSR, 1); + atmel_copy_to_host(dev, dev->dev_addr, 0xc000, 6); + atmel_write16(dev, BSR, 0x200); + rc = 1; + } else { + /* Standard firmware in flash, boot it up and ask + for the Mac Address */ + priv->card_type = CARD_TYPE_SPI_FLASH; + if (atmel_wakeup_firmware(priv)) { + atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6); + + /* got address, now squash it again until the network + interface is opened */ + if (priv->bus_type == BUS_TYPE_PCCARD) + atmel_write16(dev, GCR, 0x0060); + atmel_write16(dev, GCR, 0x0040); + rc = 1; + } + } + + if (rc) { + if (dev->dev_addr[0] == 0xFF) { + u8 default_mac[] = {0x00,0x04, 0x25, 0x00, 0x00, 0x00}; + printk(KERN_ALERT "%s: *** Invalid MAC address. UPGRADE Firmware ****\n", dev->name); + memcpy(dev->dev_addr, default_mac, 6); + } + printk(KERN_INFO "%s: MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] ); + + } + + return rc; +} + +static void build_wep_mib(struct atmel_private *priv) +/* Move the encyption information on the MIB structure. + This routine is for the pre-WPA firmware: later firmware has + a different format MIB and a different routine. */ +{ + struct { /* NB this is matched to the hardware, don't change. */ + u8 wep_is_on; + u8 default_key; /* 0..3 */ + u8 reserved; + u8 exclude_unencrypted; + + u32 WEPICV_error_count; + u32 WEP_excluded_count; + + u8 wep_keys[MAX_ENCRYPTION_KEYS][13]; + u8 encryption_level; /* 0, 1, 2 */ + u8 reserved2[3]; + } mib; + int i; + + mib.wep_is_on = priv->wep_is_on; + if (priv->wep_is_on) { + if (priv->wep_key_len[priv->default_key] > 5) + mib.encryption_level = 2; + else + mib.encryption_level = 1; + } else { + mib.encryption_level = 0; + } + + mib.default_key = priv->default_key; + mib.exclude_unencrypted = priv->exclude_unencrypted; + + for(i = 0; i < MAX_ENCRYPTION_KEYS; i++) + memcpy(mib.wep_keys[i], priv->wep_keys[i], 13); + + atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib)); +} + +static void build_wpa_mib(struct atmel_private *priv) +{ + /* This is for the later (WPA enabled) firmware. */ + + struct { /* NB this is matched to the hardware, don't change. */ + u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE]; + u8 receiver_address[6]; + u8 wep_is_on; + u8 default_key; /* 0..3 */ + u8 group_key; + u8 exclude_unencrypted; + u8 encryption_type; + u8 reserved; + + u32 WEPICV_error_count; + u32 WEP_excluded_count; + + u8 key_RSC[4][8]; + } mib; + + int i; + + mib.wep_is_on = priv->wep_is_on; + mib.exclude_unencrypted = priv->exclude_unencrypted; + memcpy(mib.receiver_address, priv->CurrentBSSID, 6); + + /* zero all the keys before adding in valid ones. */ + memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value)); + + if (priv->wep_is_on) { + /* There's a comment in the Atmel code to the effect that this is only valid + when still using WEP, it may need to be set to something to use WPA */ + memset(mib.key_RSC, 0, sizeof(mib.key_RSC)); + + mib.default_key = mib.group_key = 255; + for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) { + if (priv->wep_key_len[i] > 0) { + memcpy(mib.cipher_default_key_value[i], priv->wep_keys[i], MAX_ENCRYPTION_KEY_SIZE); + if (i == priv->default_key) { + mib.default_key = i; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite; + } else { + mib.group_key = i; + priv->group_cipher_suite = priv->pairwise_cipher_suite; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite; + } + } + } + if (mib.default_key == 255) + mib.default_key = mib.group_key != 255 ? mib.group_key : 0; + if (mib.group_key == 255) + mib.group_key = mib.default_key; + + } + + atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib)); +} + +static int reset_atmel_card(struct net_device *dev) +{ + /* do everything necessary to wake up the hardware, including + waiting for the lightning strike and throwing the knife switch.... + + set all the Mib values which matter in the card to match + their settings in the atmel_private structure. Some of these + can be altered on the fly, but many (WEP, infrastucture or ad-hoc) + can only be changed by tearing down the world and coming back through + here. + + This routine is also responsible for initialising some + hardware-specific fields in the atmel_private structure, + including a copy of the firmware's hostinfo stucture + which is the route into the rest of the firmare datastructures. */ + + struct atmel_private *priv = netdev_priv(dev); + u8 configuration; + + /* data to add to the firmware names, in priority order + this implemenents firmware versioning */ + + static char *firmware_modifier[] = { + "-wpa", + "", + NULL + }; + + /* reset pccard */ + if (priv->bus_type == BUS_TYPE_PCCARD) + atmel_write16(priv->dev, GCR, 0x0060); + + /* stop card , disable interrupts */ + atmel_write16(priv->dev, GCR, 0x0040); + + if (priv->card_type == CARD_TYPE_EEPROM) { + /* copy in firmware if needed */ + const struct firmware *fw_entry = NULL; + unsigned char *fw; + int len = priv->firmware_length; + if (!(fw = priv->firmware)) { + if (priv->firmware_type == ATMEL_FW_TYPE_NONE) { + if (strlen(priv->firmware_id) == 0) { + printk(KERN_INFO + "%s: card type is unknown: assuming at76c502 firmware is OK.\n", + dev->name); + printk(KERN_INFO + "%s: if not, use the firmware= module parameter.\n", + dev->name); + strcpy(priv->firmware_id, "atmel_at76c502.bin"); + } + if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) { + printk(KERN_ALERT + "%s: firmware %s is missing, cannot continue.\n", + dev->name, priv->firmware_id); + return 0; + } + } else { + int fw_index = 0; + int success = 0; + + /* get firmware filename entry based on firmware type ID */ + while (fw_table[fw_index].fw_type != priv->firmware_type + && fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) + fw_index++; + + /* construct the actual firmware file name */ + if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) { + int i; + for (i = 0; firmware_modifier[i]; i++) { + snprintf(priv->firmware_id, 32, "%s%s.%s", fw_table[fw_index].fw_file, + firmware_modifier[i], fw_table[fw_index].fw_file_ext); + priv->firmware_id[31] = '\0'; + if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) == 0) { + success = 1; + break; + } + } + } + if (!success) { + printk(KERN_ALERT + "%s: firmware %s is missing, cannot start.\n", + dev->name, priv->firmware_id); + priv->firmware_id[0] = '\0'; + return 0; + } + } + + fw = fw_entry->data; + len = fw_entry->size; + } + + if (len <= 0x6000) { + atmel_write16(priv->dev, BSR, BSS_IRAM); + atmel_copy_to_card(priv->dev, 0, fw, len); + atmel_set_gcr(priv->dev, GCR_REMAP); + } else { + /* Remap */ + atmel_set_gcr(priv->dev, GCR_REMAP); + atmel_write16(priv->dev, BSR, BSS_IRAM); + atmel_copy_to_card(priv->dev, 0, fw, 0x6000); + atmel_write16(priv->dev, BSR, 0x2ff); + atmel_copy_to_card(priv->dev, 0x8000, &fw[0x6000], len - 0x6000); + } + + if (fw_entry) + release_firmware(fw_entry); + } + + if (!atmel_wakeup_firmware(priv)) + return 0; + + /* Check the version and set the correct flag for wpa stuff, + old and new firmware is incompatible. + The pre-wpa 3com firmware reports major version 5, + the wpa 3com firmware is major version 4 and doesn't need + the 3com broken-ness filter. */ + priv->use_wpa = (priv->host_info.major_version == 4); + priv->radio_on_broken = (priv->host_info.major_version == 5); + + /* unmask all irq sources */ + atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff); + + /* int Tx system and enable Tx */ + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0); + atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L); + atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0); + atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0); + + priv->tx_desc_free = priv->host_info.tx_desc_count; + priv->tx_desc_head = 0; + priv->tx_desc_tail = 0; + priv->tx_desc_previous = 0; + priv->tx_free_mem = priv->host_info.tx_buff_size; + priv->tx_buff_head = 0; + priv->tx_buff_tail = 0; + + configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), + configuration | FUNC_CTRL_TxENABLE); + + /* init Rx system and enable */ + priv->rx_desc_head = 0; + + configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), + configuration | FUNC_CTRL_RxENABLE); + + if (!priv->radio_on_broken) { + if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) == + CMD_STATUS_REJECTED_RADIO_OFF) { + printk(KERN_INFO + "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n", + dev->name); + return 0; + } + } + + /* set up enough MIB values to run. */ + atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate); + atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_TX_PROMISCUOUS_POS, PROM_MODE_OFF); + atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_RTS_THRESHOLD_POS, priv->rts_threshold); + atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_FRAG_THRESHOLD_POS, priv->frag_threshold); + atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry); + atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry); + atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble); + atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS, + priv->dev->dev_addr, 6); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_BEACON_PER_POS, priv->default_beacon_period); + atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, atmel_basic_rates, 4); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_PRIVACY_POS, priv->wep_is_on); + if (priv->use_wpa) + build_wpa_mib(priv); + else + build_wep_mib(priv); + + return 1; +} + +static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size) +{ + if (cmd) + atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET), + cmd, cmd_size); + + atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command); + atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0); +} + +static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size) +{ + int i, status; + + atmel_send_command(priv, command, cmd, cmd_size); + + for (i = 5000; i; i--) { + status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET)); + if (status != CMD_STATUS_IDLE && + status != CMD_STATUS_IN_PROGRESS) + break; + udelay(20); + } + + if (i == 0) { + printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name); + status = CMD_STATUS_HOST_ERROR; + } else { + if (command != CMD_EnableRadio) + status = CMD_STATUS_COMPLETE; + } + + return status; +} + +static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index) +{ + struct get_set_mib m; + m.type = type; + m.size = 1; + m.index = index; + + atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + 1); + return atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE)); +} + +static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data) +{ + struct get_set_mib m; + m.type = type; + m.size = 1; + m.index = index; + m.data[0] = data; + + atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1); +} + +static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data) +{ + struct get_set_mib m; + m.type = type; + m.size = 2; + m.index = index; + m.data[0] = data; + m.data[1] = data >> 8; + + atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2); +} + +static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len) +{ + struct get_set_mib m; + m.type = type; + m.size = data_len; + m.index = index; + + if (data_len > MIB_MAX_DATA_BYTES) + printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); + + memcpy(m.data, data, data_len); + atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len); +} + +static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len) +{ + struct get_set_mib m; + m.type = type; + m.size = data_len; + m.index = index; + + if (data_len > MIB_MAX_DATA_BYTES) + printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); + + atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len); + atmel_copy_to_host(priv->dev, data, + atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len); +} + +static void atmel_writeAR(struct net_device *dev, u16 data) +{ + int i; + outw(data, dev->base_addr + AR); + /* Address register appears to need some convincing..... */ + for (i = 0; data != inw(dev->base_addr + AR) && i<10; i++) + outw(data, dev->base_addr + AR); +} + +static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len) +{ + int i; + atmel_writeAR(dev, dest); + if (dest % 2) { + atmel_write8(dev, DR, *src); + src++; len--; + } + for (i = len; i > 1 ; i -= 2) { + u8 lb = *src++; + u8 hb = *src++; + atmel_write16(dev, DR, lb | (hb << 8)); + } + if (i) + atmel_write8(dev, DR, *src); +} + +static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len) +{ + int i; + atmel_writeAR(dev, src); + if (src % 2) { + *dest = atmel_read8(dev, DR); + dest++; len--; + } + for (i = len; i > 1 ; i -= 2) { + u16 hw = atmel_read16(dev, DR); + *dest++ = hw; + *dest++ = hw >> 8; + } + if (i) + *dest = atmel_read8(dev, DR); +} + +static void atmel_set_gcr(struct net_device *dev, u16 mask) +{ + outw(inw(dev->base_addr + GCR) | mask, dev->base_addr + GCR); +} + +static void atmel_clear_gcr(struct net_device *dev, u16 mask) +{ + outw(inw(dev->base_addr + GCR) & ~mask, dev->base_addr + GCR); +} + +static int atmel_lock_mac(struct atmel_private *priv) +{ + int i, j = 20; + retry: + for (i = 5000; i; i--) { + if (!atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) + break; + udelay(20); + } + + if (!i) return 0; /* timed out */ + + atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1); + if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) { + atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); + if (!j--) return 0; /* timed out */ + goto retry; + } + + return 1; +} + +static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) +{ + atmel_writeAR(priv->dev, pos); + atmel_write16(priv->dev, DR, data); /* card is little-endian */ + atmel_write16(priv->dev, DR, data >> 16); +} + +/***************************************************************************/ +/* There follows the source form of the MAC address reading firmware */ +/***************************************************************************/ +#if 0 + +/* Copyright 2003 Matthew T. Russotto */ +/* But derived from the Atmel 76C502 firmware written by Atmel and */ +/* included in "atmel wireless lan drivers" package */ +/** + This file is part of net.russotto.AtmelMACFW, hereto referred to + as AtmelMACFW + + AtmelMACFW is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 + as published by the Free Software Foundation. + + AtmelMACFW is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with AtmelMACFW; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +****************************************************************************/ +/* This firmware should work on the 76C502 RFMD, RFMD_D, and RFMD_E */ +/* It will probably work on the 76C504 and 76C502 RFMD_3COM */ +/* It only works on SPI EEPROM versions of the card. */ + +/* This firmware initializes the SPI controller and clock, reads the MAC */ +/* address from the EEPROM into SRAM, and puts the SRAM offset of the MAC */ +/* address in MR2, and sets MR3 to 0x10 to indicate it is done */ +/* It also puts a complete copy of the EEPROM in SRAM with the offset in */ +/* MR4, for investigational purposes (maybe we can determine chip type */ +/* from that?) */ + + .org 0 + .set MRBASE, 0x8000000 + .set CPSR_INITIAL, 0xD3 /* IRQ/FIQ disabled, ARM mode, Supervisor state */ + .set CPSR_USER, 0xD1 /* IRQ/FIQ disabled, ARM mode, USER state */ + .set SRAM_BASE, 0x02000000 + .set SP_BASE, 0x0F300000 + .set UNK_BASE, 0x0F000000 /* Some internal device, but which one? */ + .set SPI_CGEN_BASE, 0x0E000000 /* Some internal device, but which one? */ + .set UNK3_BASE, 0x02014000 /* Some internal device, but which one? */ + .set STACK_BASE, 0x5600 + .set SP_SR, 0x10 + .set SP_TDRE, 2 /* status register bit -- TDR empty */ + .set SP_RDRF, 1 /* status register bit -- RDR full */ + .set SP_SWRST, 0x80 + .set SP_SPIEN, 0x1 + .set SP_CR, 0 /* control register */ + .set SP_MR, 4 /* mode register */ + .set SP_RDR, 0x08 /* Read Data Register */ + .set SP_TDR, 0x0C /* Transmit Data Register */ + .set SP_CSR0, 0x30 /* chip select registers */ + .set SP_CSR1, 0x34 + .set SP_CSR2, 0x38 + .set SP_CSR3, 0x3C + .set NVRAM_CMD_RDSR, 5 /* read status register */ + .set NVRAM_CMD_READ, 3 /* read data */ + .set NVRAM_SR_RDY, 1 /* RDY bit. This bit is inverted */ + .set SPI_8CLOCKS, 0xFF /* Writing this to the TDR doesn't do anything to the + serial output, since SO is normally high. But it + does cause 8 clock cycles and thus 8 bits to be + clocked in to the chip. See Atmel's SPI + controller (e.g. AT91M55800) timing and 4K + SPI EEPROM manuals */ + + .set NVRAM_SCRATCH, 0x02000100 /* arbitrary area for scratchpad memory */ + .set NVRAM_IMAGE, 0x02000200 + .set NVRAM_LENGTH, 0x0200 + .set MAC_ADDRESS_MIB, SRAM_BASE + .set MAC_ADDRESS_LENGTH, 6 + .set MAC_BOOT_FLAG, 0x10 + .set MR1, 0 + .set MR2, 4 + .set MR3, 8 + .set MR4, 0xC +RESET_VECTOR: + b RESET_HANDLER +UNDEF_VECTOR: + b HALT1 +SWI_VECTOR: + b HALT1 +IABORT_VECTOR: + b HALT1 +DABORT_VECTOR: +RESERVED_VECTOR: + b HALT1 +IRQ_VECTOR: + b HALT1 +FIQ_VECTOR: + b HALT1 +HALT1: b HALT1 +RESET_HANDLER: + mov r0, #CPSR_INITIAL + msr CPSR_c, r0 /* This is probably unnecessary */ + +/* I'm guessing this is initializing clock generator electronics for SPI */ + ldr r0, =SPI_CGEN_BASE + mov r1, #0 + mov r1, r1, lsl #3 + orr r1,r1, #0 + str r1, [r0] + ldr r1, [r0, #28] + bic r1, r1, #16 + str r1, [r0, #28] + mov r1, #1 + str r1, [r0, #8] + + ldr r0, =MRBASE + mov r1, #0 + strh r1, [r0, #MR1] + strh r1, [r0, #MR2] + strh r1, [r0, #MR3] + strh r1, [r0, #MR4] + + mov sp, #STACK_BASE + bl SP_INIT + mov r0, #10 + bl DELAY9 + bl GET_MAC_ADDR + bl GET_WHOLE_NVRAM + ldr r0, =MRBASE + ldr r1, =MAC_ADDRESS_MIB + strh r1, [r0, #MR2] + ldr r1, =NVRAM_IMAGE + strh r1, [r0, #MR4] + mov r1, #MAC_BOOT_FLAG + strh r1, [r0, #MR3] +HALT2: b HALT2 +.func Get_Whole_NVRAM, GET_WHOLE_NVRAM +GET_WHOLE_NVRAM: + stmdb sp!, {lr} + mov r2, #0 /* 0th bytes of NVRAM */ + mov r3, #NVRAM_LENGTH + mov r1, #0 /* not used in routine */ + ldr r0, =NVRAM_IMAGE + bl NVRAM_XFER + ldmia sp!, {lr} + bx lr +.endfunc + +.func Get_MAC_Addr, GET_MAC_ADDR +GET_MAC_ADDR: + stmdb sp!, {lr} + mov r2, #0x120 /* address of MAC Address within NVRAM */ + mov r3, #MAC_ADDRESS_LENGTH + mov r1, #0 /* not used in routine */ + ldr r0, =MAC_ADDRESS_MIB + bl NVRAM_XFER + ldmia sp!, {lr} + bx lr +.endfunc +.ltorg +.func Delay9, DELAY9 +DELAY9: + adds r0, r0, r0, LSL #3 /* r0 = r0 * 9 */ +DELAYLOOP: + beq DELAY9_done + subs r0, r0, #1 + b DELAYLOOP +DELAY9_done: + bx lr +.endfunc + +.func SP_Init, SP_INIT +SP_INIT: + mov r1, #SP_SWRST + ldr r0, =SP_BASE + str r1, [r0, #SP_CR] /* reset the SPI */ + mov r1, #0 + str r1, [r0, #SP_CR] /* release SPI from reset state */ + mov r1, #SP_SPIEN + str r1, [r0, #SP_MR] /* set the SPI to MASTER mode*/ + str r1, [r0, #SP_CR] /* enable the SPI */ + +/* My guess would be this turns on the SPI clock */ + ldr r3, =SPI_CGEN_BASE + ldr r1, [r3, #28] + orr r1, r1, #0x2000 + str r1, [r3, #28] + + ldr r1, =0x2000c01 + str r1, [r0, #SP_CSR0] + ldr r1, =0x2000201 + str r1, [r0, #SP_CSR1] + str r1, [r0, #SP_CSR2] + str r1, [r0, #SP_CSR3] + ldr r1, [r0, #SP_SR] + ldr r0, [r0, #SP_RDR] + bx lr +.endfunc +.func NVRAM_Init, NVRAM_INIT +NVRAM_INIT: + ldr r1, =SP_BASE + ldr r0, [r1, #SP_RDR] + mov r0, #NVRAM_CMD_RDSR + str r0, [r1, #SP_TDR] +SP_loop1: + ldr r0, [r1, #SP_SR] + tst r0, #SP_TDRE + beq SP_loop1 + + mov r0, #SPI_8CLOCKS + str r0, [r1, #SP_TDR] +SP_loop2: + ldr r0, [r1, #SP_SR] + tst r0, #SP_TDRE + beq SP_loop2 + + ldr r0, [r1, #SP_RDR] +SP_loop3: + ldr r0, [r1, #SP_SR] + tst r0, #SP_RDRF + beq SP_loop3 + + ldr r0, [r1, #SP_RDR] + and r0, r0, #255 + bx lr +.endfunc + +.func NVRAM_Xfer, NVRAM_XFER + /* r0 = dest address */ + /* r1 = not used */ + /* r2 = src address within NVRAM */ + /* r3 = length */ +NVRAM_XFER: + stmdb sp!, {r4, r5, lr} + mov r5, r0 /* save r0 (dest address) */ + mov r4, r3 /* save r3 (length) */ + mov r0, r2, LSR #5 /* SPI memories put A8 in the command field */ + and r0, r0, #8 + add r0, r0, #NVRAM_CMD_READ + ldr r1, =NVRAM_SCRATCH + strb r0, [r1, #0] /* save command in NVRAM_SCRATCH[0] */ + strb r2, [r1, #1] /* save low byte of source address in NVRAM_SCRATCH[1] */ +_local1: + bl NVRAM_INIT + tst r0, #NVRAM_SR_RDY + bne _local1 + mov r0, #20 + bl DELAY9 + mov r2, r4 /* length */ + mov r1, r5 /* dest address */ + mov r0, #2 /* bytes to transfer in command */ + bl NVRAM_XFER2 + ldmia sp!, {r4, r5, lr} + bx lr +.endfunc + +.func NVRAM_Xfer2, NVRAM_XFER2 +NVRAM_XFER2: + stmdb sp!, {r4, r5, r6, lr} + ldr r4, =SP_BASE + mov r3, #0 + cmp r0, #0 + bls _local2 + ldr r5, =NVRAM_SCRATCH +_local4: + ldrb r6, [r5, r3] + str r6, [r4, #SP_TDR] +_local3: + ldr r6, [r4, #SP_SR] + tst r6, #SP_TDRE + beq _local3 + add r3, r3, #1 + cmp r3, r0 /* r0 is # of bytes to send out (command+addr) */ + blo _local4 +_local2: + mov r3, #SPI_8CLOCKS + str r3, [r4, #SP_TDR] + ldr r0, [r4, #SP_RDR] +_local5: + ldr r0, [r4, #SP_SR] + tst r0, #SP_RDRF + beq _local5 + ldr r0, [r4, #SP_RDR] /* what's this byte? It's the byte read while writing the TDR -- nonsense, because the NVRAM doesn't read and write at the same time */ + mov r0, #0 + cmp r2, #0 /* r2 is # of bytes to copy in */ + bls _local6 +_local7: + ldr r5, [r4, #SP_SR] + tst r5, #SP_TDRE + beq _local7 + str r3, [r4, #SP_TDR] /* r3 has SPI_8CLOCKS */ +_local8: + ldr r5, [r4, #SP_SR] + tst r5, #SP_RDRF + beq _local8 + ldr r5, [r4, #SP_RDR] /* but didn't we read this byte above? */ + strb r5, [r1], #1 /* postindexed */ + add r0, r0, #1 + cmp r0, r2 + blo _local7 /* since we don't send another address, the NVRAM must be capable of sequential reads */ +_local6: + mov r0, #200 + bl DELAY9 + ldmia sp!, {r4, r5, r6, lr} + bx lr +#endif diff --git a/drivers/net/wireless/atmel.h b/drivers/net/wireless/atmel.h new file mode 100644 index 00000000000..825000edfc2 --- /dev/null +++ b/drivers/net/wireless/atmel.h @@ -0,0 +1,43 @@ +/*** -*- linux-c -*- ********************************************************** + + Driver for Atmel at76c502 at76c504 and at76c506 wireless cards. + + Copyright 2005 Dan Williams and Red Hat, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This software is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Atmel wireless lan drivers; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +******************************************************************************/ + +#ifndef _ATMEL_H +#define _ATMEL_H + +typedef enum { + ATMEL_FW_TYPE_NONE = 0, + ATMEL_FW_TYPE_502, + ATMEL_FW_TYPE_502D, + ATMEL_FW_TYPE_502E, + ATMEL_FW_TYPE_502_3COM, + ATMEL_FW_TYPE_504, + ATMEL_FW_TYPE_504_2958, + ATMEL_FW_TYPE_504A_2958, + ATMEL_FW_TYPE_506 +} AtmelFWType; + +struct net_device *init_atmel_card(unsigned short, int, const AtmelFWType, struct device *, + int (*present_func)(void *), void * ); +void stop_atmel_card( struct net_device *, int ); +int atmel_open( struct net_device * ); + +#endif diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c new file mode 100644 index 00000000000..a91b507e0a7 --- /dev/null +++ b/drivers/net/wireless/atmel_cs.c @@ -0,0 +1,708 @@ +/*** -*- linux-c -*- ********************************************************** + + Driver for Atmel at76c502 at76c504 and at76c506 wireless cards. + + Copyright 2000-2001 ATMEL Corporation. + Copyright 2003 Simon Kelley. + + This code was developed from version 2.1.1 of the Atmel drivers, + released by Atmel corp. under the GPL in December 2002. It also + includes code from the Linux aironet drivers (C) Benjamin Reed, + and the Linux PCMCIA package, (C) David Hinds. + + For all queries about this code, please contact the current author, + Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This software is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Atmel wireless lan drivers; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +******************************************************************************/ + +#include <linux/config.h> +#ifdef __IN_PCMCIA_PACKAGE__ +#include <pcmcia/k_compat.h> +#endif +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/netdevice.h> +#include <linux/moduleparam.h> +#include <linux/device.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> +#include <pcmcia/ciscode.h> + +#include <asm/io.h> +#include <asm/system.h> +#include <linux/wireless.h> + +#include "atmel.h" + +/* + All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If + you do not define PCMCIA_DEBUG at all, all the debug code will be + left out. If you compile with PCMCIA_DEBUG=0, the debug code will + be present but disabled -- but it can then be enabled for specific + modules at load time with a 'pc_debug=#' option to insmod. +*/ +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +static char *version = "$Revision: 1.2 $"; +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); +#else +#define DEBUG(n, args...) +#endif + +/*====================================================================*/ + +MODULE_AUTHOR("Simon Kelley"); +MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards."); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); + +/*====================================================================*/ + +/* + The event() function is this driver's Card Services event handler. + It will be called by Card Services when an appropriate card status + event is received. The config() and release() entry points are + used to configure or release a socket, in response to card + insertion and ejection events. They are invoked from the atmel_cs + event handler. +*/ + +static void atmel_config(dev_link_t *link); +static void atmel_release(dev_link_t *link); +static int atmel_event(event_t event, int priority, + event_callback_args_t *args); + +/* + The attach() and detach() entry points are used to create and destroy + "instances" of the driver, where each instance represents everything + needed to manage one actual PCMCIA card. +*/ + +static dev_link_t *atmel_attach(void); +static void atmel_detach(dev_link_t *); + +/* + You'll also need to prototype all the functions that will actually + be used to talk to your device. See 'pcmem_cs' for a good example + of a fully self-sufficient driver; the other drivers rely more or + less on other parts of the kernel. +*/ + +/* + The dev_info variable is the "key" that is used to match up this + device driver with appropriate cards, through the card configuration + database. +*/ + +static dev_info_t dev_info = "atmel_cs"; + +/* + A linked list of "instances" of the atmelnet device. Each actual + PCMCIA card corresponds to one device instance, and is described + by one dev_link_t structure (defined in ds.h). + + You may not want to use a linked list for this -- for example, the + memory card driver uses an array of dev_link_t pointers, where minor + device numbers are used to derive the corresponding array index. +*/ + +static dev_link_t *dev_list = NULL; + +/* + A dev_link_t structure has fields for most things that are needed + to keep track of a socket, but there will usually be some device + specific information that also needs to be kept track of. The + 'priv' pointer in a dev_link_t structure can be used to point to + a device-specific private data structure, like this. + + A driver needs to provide a dev_node_t structure for each device + on a card. In some cases, there is only one device per card (for + example, ethernet cards, modems). In other cases, there may be + many actual or logical devices (SCSI adapters, memory cards with + multiple partitions). The dev_node_t structures need to be kept + in a linked list starting at the 'dev' field of a dev_link_t + structure. We allocate them in the card's private data structure, + because they generally shouldn't be allocated dynamically. + + In this case, we also provide a flag to indicate if a device is + "stopped" due to a power management event, or card ejection. The + device IO routines can use a flag like this to throttle IO to a + card that is not ready to accept it. +*/ + +typedef struct local_info_t { + dev_node_t node; + struct net_device *eth_dev; +} local_info_t; + +/*====================================================================== + + atmel_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + + The dev_link structure is initialized, but we don't actually + configure the card at this point -- we wait until we receive a + card insertion event. + + ======================================================================*/ + +static dev_link_t *atmel_attach(void) +{ + client_reg_t client_reg; + dev_link_t *link; + local_info_t *local; + int ret; + + DEBUG(0, "atmel_attach()\n"); + + /* Initialize the dev_link_t structure */ + link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL); + if (!link) { + printk(KERN_ERR "atmel_cs: no memory for new device\n"); + return NULL; + } + memset(link, 0, sizeof(struct dev_link_t)); + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = NULL; + + /* + General socket configuration defaults can go here. In this + client, we assume very little, and rely on the CIS for almost + everything. In most clients, many details (i.e., number, sizes, + and attributes of IO windows) are fixed by the nature of the + device, and can be hard-wired here. + */ + link->conf.Attributes = 0; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Allocate space for private device-specific data */ + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) { + printk(KERN_ERR "atmel_cs: no memory for new device\n"); + kfree (link); + return NULL; + } + memset(local, 0, sizeof(local_info_t)); + link->priv = local; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &atmel_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != 0) { + cs_error(link->handle, RegisterClient, ret); + atmel_detach(link); + return NULL; + } + + return link; +} /* atmel_attach */ + +/*====================================================================== + + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. + + ======================================================================*/ + +static void atmel_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DEBUG(0, "atmel_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) break; + if (*linkp == NULL) + return; + + if (link->state & DEV_CONFIG) + atmel_release(link); + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, free pieces */ + *linkp = link->next; + if (link->priv) + kfree(link->priv); + kfree(link); +} + +/*====================================================================== + + atmel_config() is scheduled to run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + device available to the system. + + ======================================================================*/ + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +/* Call-back function to interrogate PCMCIA-specific information + about the current existance of the card */ +static int card_present(void *arg) +{ + dev_link_t *link = (dev_link_t *)arg; + if (link->state & DEV_SUSPEND) + return 0; + else if (link->state & DEV_PRESENT) + return 1; + + return 0; +} + +/* list of cards we know about and their firmware requirements. + Go either by Manfid or version strings. + Cards not in this list will need a firmware parameter to the module + in all probability. Note that the SMC 2632 V2 and V3 have the same + manfids, so we ignore those and use the version1 strings. */ + +static struct { + int manf, card; + char *ver1; + AtmelFWType firmware; + char *name; +} card_table[] = { + { 0, 0, "WLAN/802.11b PC CARD", ATMEL_FW_TYPE_502D, "Actiontec 802CAT1" }, + { 0, 0, "ATMEL/AT76C502AR", ATMEL_FW_TYPE_502, "NoName-RFMD" }, + { 0, 0, "ATMEL/AT76C502AR_D", ATMEL_FW_TYPE_502D, "NoName-revD" }, + { 0, 0, "ATMEL/AT76C502AR_E", ATMEL_FW_TYPE_502E, "NoName-revE" }, + { 0, 0, "ATMEL/AT76C504", ATMEL_FW_TYPE_504, "NoName-504" }, + { 0, 0, "ATMEL/AT76C504A", ATMEL_FW_TYPE_504A_2958, "NoName-504a-2958" }, + { 0, 0, "ATMEL/AT76C504_R", ATMEL_FW_TYPE_504_2958, "NoName-504-2958" }, + { MANFID_3COM, 0x0620, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRWE62092B" }, + { MANFID_3COM, 0x0696, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRSHPW196" }, + { 0, 0, "SMC/2632W-V2", ATMEL_FW_TYPE_502, "SMC 2632W-V2" }, + { 0, 0, "SMC/2632W", ATMEL_FW_TYPE_502D, "SMC 2632W-V3" }, + { 0xd601, 0x0007, NULL, ATMEL_FW_TYPE_502, "Sitecom WLAN-011" }, + { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" }, + { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" }, + { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" }, + { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" }, + { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" }, + { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" }, + { 0, 0, "11WAVE/11WP611AL-E", ATMEL_FW_TYPE_502E, "11WAVE WaveBuddy" }, + { 0, 0, "LG/LW2100N", ATMEL_FW_TYPE_502E, "LG LW2100N 11Mbps WLAN PCMCIA Card" }, +}; + +static void atmel_config(dev_link_t *link) +{ + client_handle_t handle; + tuple_t tuple; + cisparse_t parse; + local_info_t *dev; + int last_fn, last_ret; + u_char buf[64]; + int card_index = -1, done = 0; + + handle = link->handle; + dev = link->priv; + + DEBUG(0, "atmel_config(0x%p)\n", link); + + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + + tuple.DesiredTuple = CISTPL_MANFID; + if (pcmcia_get_first_tuple(handle, &tuple) == 0) { + int i; + cistpl_manfid_t *manfid; + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + manfid = &(parse.manfid); + for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) { + if (!card_table[i].ver1 && + manfid->manf == card_table[i].manf && + manfid->card == card_table[i].card) { + card_index = i; + done = 1; + } + } + } + + tuple.DesiredTuple = CISTPL_VERS_1; + if (!done && (pcmcia_get_first_tuple(handle, &tuple) == 0)) { + int i, j, k; + cistpl_vers_1_t *ver1; + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + ver1 = &(parse.version_1); + + for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) { + for (j = 0; j < ver1->ns; j++) { + char *p = card_table[i].ver1; + char *q = &ver1->str[ver1->ofs[j]]; + if (!p) + goto mismatch; + for (k = 0; k < j; k++) { + while ((*p != '\0') && (*p != '/')) p++; + if (*p == '\0') { + if (*q != '\0') + goto mismatch; + } else { + p++; + } + } + while((*q != '\0') && (*p != '\0') && + (*p != '/') && (*p == *q)) p++, q++; + if (((*p != '\0') && *p != '/') || *q != '\0') + goto mismatch; + } + card_index = i; + break; /* done */ + + mismatch: + j = 0; /* dummy stmt to shut up compiler */ + } + } + + /* + This reads the card's CONFIG tuple to find its configuration + registers. + */ + tuple.DesiredTuple = CISTPL_CONFIG; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* + In this loop, we scan the CIS for configuration table entries, + each of which describes a valid card configuration, including + voltage, IO window, memory window, and interrupt settings. + + We make no assumptions about the card to be configured: we use + just the information available in the CIS. In an ideal world, + this would work for any PCMCIA card, but it requires a complete + and accurate CIS. In practice, a driver usually "knows" most of + these things without consulting the CIS, and most client drivers + will only use the CIS to fill in implementation-defined details. + */ + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t dflt = { 0 }; + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + if (pcmcia_get_tuple_data(handle, &tuple) != 0 || + pcmcia_parse_tuple(handle, &tuple, &parse) != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; + if (cfg->index == 0) goto next_entry; + link->conf.ConfigIndex = cfg->index; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000; + + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + link->io.Attributes2 = link->io.Attributes1; + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + + /* If we got this far, we're cool! */ + break; + + next_entry: + CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple)); + } + + /* + Allocate an interrupt line. Note that this does not assign a + handler to the interrupt, unless the 'Handler' member of the + irq structure is initialized. + */ + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + + /* + This actually configures the PCMCIA socket -- setting up + the I/O windows and the interrupt mapping, and putting the + card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); + + if (link->irq.AssignedIRQ == 0) { + printk(KERN_ALERT + "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); + goto cs_failed; + } + + ((local_info_t*)link->priv)->eth_dev = + init_atmel_card(link->irq.AssignedIRQ, + link->io.BasePort1, + card_index == -1 ? ATMEL_FW_TYPE_NONE : card_table[card_index].firmware, + &handle_to_dev(handle), + card_present, + link); + if (!((local_info_t*)link->priv)->eth_dev) + goto cs_failed; + + /* + At this point, the dev_node_t structure(s) need to be + initialized and arranged in a linked list at link->dev. + */ + strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name ); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + /* Finally, report what we've done */ + printk(KERN_INFO "%s: %s%sindex 0x%02x: Vcc %d.%d", + dev->node.dev_name, + card_index == -1 ? "" : card_table[card_index].name, + card_index == -1 ? "" : " ", + link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + if (link->conf.Attributes & CONF_ENABLE_IRQ) + printk(", irq %d", link->irq.AssignedIRQ); + if (link->io.NumPorts1) + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + if (link->io.NumPorts2) + printk(" & 0x%04x-0x%04x", link->io.BasePort2, + link->io.BasePort2+link->io.NumPorts2-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + atmel_release(link); +} + +/*====================================================================== + + After a card is removed, atmel_release() will unregister the + device, and release the PCMCIA configuration. If the device is + still open, this will be postponed until it is closed. + + ======================================================================*/ + +static void atmel_release(dev_link_t *link) +{ + struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; + + DEBUG(0, "atmel_release(0x%p)\n", link); + + /* Unlink the device chain */ + link->dev = NULL; + + if (dev) + stop_atmel_card(dev, 0); + ((local_info_t*)link->priv)->eth_dev = NULL; + + /* Don't bother checking to see if these succeed or not */ + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; +} + +/*====================================================================== + + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. + + When a CARD_REMOVAL event is received, we immediately set a + private flag to block future accesses to this device. All the + functions that actually access the device should check this flag + to make sure the card is still present. + + ======================================================================*/ + +static int atmel_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + local_info_t *local = link->priv; + + DEBUG(1, "atmel_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + netif_device_detach(local->eth_dev); + atmel_release(link); + } + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + atmel_config(link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) { + netif_device_detach(local->eth_dev); + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, &link->conf); + atmel_open(local->eth_dev); + netif_device_attach(local->eth_dev); + } + break; + } + return 0; +} /* atmel_event */ + +/*====================================================================*/ +static struct pcmcia_driver atmel_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "atmel_cs", + }, + .attach = atmel_attach, + .detach = atmel_detach, +}; + +static int atmel_cs_init(void) +{ + return pcmcia_register_driver(&atmel_driver); +} + +static void atmel_cs_cleanup(void) +{ + pcmcia_unregister_driver(&atmel_driver); + BUG_ON(dev_list != NULL); +} + +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + In addition: + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +module_init(atmel_cs_init); +module_exit(atmel_cs_cleanup); diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c new file mode 100644 index 00000000000..2eb00a957bb --- /dev/null +++ b/drivers/net/wireless/atmel_pci.c @@ -0,0 +1,89 @@ +/*** -*- linux-c -*- ********************************************************** + + Driver for Atmel at76c502 at76c504 and at76c506 wireless cards. + + Copyright 2004 Simon Kelley. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This software is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Atmel wireless lan drivers; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +******************************************************************************/ +#include <linux/config.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include "atmel.h" + +MODULE_AUTHOR("Simon Kelley"); +MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards."); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Atmel at76c506 PCI wireless cards"); + +static struct pci_device_id card_ids[] = { + { 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, card_ids); + +static int atmel_pci_probe(struct pci_dev *, const struct pci_device_id *); +static void atmel_pci_remove(struct pci_dev *); + +static struct pci_driver atmel_driver = { + .name = "atmel", + .id_table = card_ids, + .probe = atmel_pci_probe, + .remove = __devexit_p(atmel_pci_remove), +}; + + +static int __devinit atmel_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pent) +{ + struct net_device *dev; + + if (pci_enable_device(pdev)) + return -ENODEV; + + pci_set_master(pdev); + + dev = init_atmel_card(pdev->irq, pdev->resource[1].start, + ATMEL_FW_TYPE_506, + &pdev->dev, NULL, NULL); + if (!dev) + return -ENODEV; + + pci_set_drvdata(pdev, dev); + return 0; +} + +static void __devexit atmel_pci_remove(struct pci_dev *pdev) +{ + stop_atmel_card(pci_get_drvdata(pdev), 1); +} + +static int __init atmel_init_module(void) +{ + return pci_module_init(&atmel_driver); +} + +static void __exit atmel_cleanup_module(void) +{ + pci_unregister_driver(&atmel_driver); +} + +module_init(atmel_init_module); +module_exit(atmel_cleanup_module); diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c new file mode 100644 index 00000000000..21c3d0d227e --- /dev/null +++ b/drivers/net/wireless/hermes.c @@ -0,0 +1,554 @@ +/* hermes.c + * + * Driver core for the "Hermes" wireless MAC controller, as used in + * the Lucent Orinoco and Cabletron RoamAbout cards. It should also + * work on the hfa3841 and hfa3842 MAC controller chips used in the + * Prism II chipsets. + * + * This is not a complete driver, just low-level access routines for + * the MAC controller itself. + * + * Based on the prism2 driver from Absolute Value Systems' linux-wlan + * project, the Linux wvlan_cs driver, Lucent's HCF-Light + * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no + * particular order). + * + * Copyright (C) 2000, David Gibson, Linuxcare Australia. + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/threads.h> +#include <linux/smp.h> +#include <asm/io.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/net.h> +#include <asm/errno.h> + +#include "hermes.h" + +MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller"); +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>" + " & David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* These are maximum timeouts. Most often, card wil react much faster */ +#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */ +#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */ +#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */ +#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ + +/* + * Debugging helpers + */ + +#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ + printk(stuff);} while (0) + +#undef HERMES_DEBUG +#ifdef HERMES_DEBUG +#include <stdarg.h> + +#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff) + +#else /* ! HERMES_DEBUG */ + +#define DEBUG(lvl, stuff...) do { } while (0) + +#endif /* ! HERMES_DEBUG */ + + +/* + * Internal functions + */ + +/* Issue a command to the chip. Waiting for it to complete is the caller's + problem. + + Returns -EBUSY if the command register is busy, 0 on success. + + Callable from any context. +*/ +static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) +{ + int k = CMD_BUSY_TIMEOUT; + u16 reg; + + /* First wait for the command register to unbusy */ + reg = hermes_read_regn(hw, CMD); + while ( (reg & HERMES_CMD_BUSY) && k ) { + k--; + udelay(1); + reg = hermes_read_regn(hw, CMD); + } + if (reg & HERMES_CMD_BUSY) { + return -EBUSY; + } + + hermes_write_regn(hw, PARAM2, 0); + hermes_write_regn(hw, PARAM1, 0); + hermes_write_regn(hw, PARAM0, param0); + hermes_write_regn(hw, CMD, cmd); + + return 0; +} + +/* + * Function definitions + */ + +void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) +{ + hw->iobase = address; + hw->reg_spacing = reg_spacing; + hw->inten = 0x0; + +#ifdef HERMES_DEBUG_BUFFER + hw->dbufp = 0; + memset(&hw->dbuf, 0xff, sizeof(hw->dbuf)); + memset(&hw->profile, 0, sizeof(hw->profile)); +#endif +} + +int hermes_init(hermes_t *hw) +{ + u16 status, reg; + int err = 0; + int k; + + /* We don't want to be interrupted while resetting the chipset */ + hw->inten = 0x0; + hermes_write_regn(hw, INTEN, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + /* Normally it's a "can't happen" for the command register to + be busy when we go to issue a command because we are + serializing all commands. However we want to have some + chance of resetting the card even if it gets into a stupid + state, so we actually wait to see if the command register + will unbusy itself here. */ + k = CMD_BUSY_TIMEOUT; + reg = hermes_read_regn(hw, CMD); + while (k && (reg & HERMES_CMD_BUSY)) { + if (reg == 0xffff) /* Special case - the card has probably been removed, + so don't wait for the timeout */ + return -ENODEV; + + k--; + udelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* No need to explicitly handle the timeout - if we've timed + out hermes_issue_cmd() will probably return -EBUSY below */ + + /* According to the documentation, EVSTAT may contain + obsolete event occurrence information. We have to acknowledge + it by writing EVACK. */ + reg = hermes_read_regn(hw, EVSTAT); + hermes_write_regn(hw, EVACK, reg); + + /* We don't use hermes_docmd_wait here, because the reset wipes + the magic constant in SWSUPPORT0 away, and it gets confused */ + err = hermes_issue_cmd(hw, HERMES_CMD_INIT, 0); + if (err) + return err; + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_INIT_TIMEOUT; + while ( (! (reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + + if (! hermes_present(hw)) { + DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", + hw->iobase); + err = -ENODEV; + goto out; + } + + if (! (reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for card to reset (reg=0x%04x)!\n", + hw->iobase, reg); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; + + out: + return err; +} + +/* Issue a command to the chip, and (busy!) wait for it to + * complete. + * + * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware + * + * Callable from any context, but locking is your problem. */ +int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) +{ + int err; + int k; + u16 reg; + u16 status; + + err = hermes_issue_cmd(hw, cmd, parm0); + if (err) { + if (! hermes_present(hw)) { + if (net_ratelimit()) + printk(KERN_WARNING "hermes @ %p: " + "Card removed while issuing command " + "0x%04x.\n", hw->iobase, cmd); + err = -ENODEV; + } else + if (net_ratelimit()) + printk(KERN_ERR "hermes @ %p: " + "Error %d issuing command 0x%04x.\n", + hw->iobase, err, cmd); + goto out; + } + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_COMPL_TIMEOUT; + while ( (! (reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + if (! hermes_present(hw)) { + printk(KERN_WARNING "hermes @ %p: Card removed " + "while waiting for command 0x%04x completion.\n", + hw->iobase, cmd); + err = -ENODEV; + goto out; + } + + if (! (reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: Timeout waiting for " + "command 0x%04x completion.\n", hw->iobase, cmd); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; + + out: + return err; +} + +int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) +{ + int err = 0; + int k; + u16 reg; + + if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) ) + return -EINVAL; + + err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); + if (err) { + return err; + } + + reg = hermes_read_regn(hw, EVSTAT); + k = ALLOC_COMPL_TIMEOUT; + while ( (! (reg & HERMES_EV_ALLOC)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + if (! hermes_present(hw)) { + printk(KERN_WARNING "hermes @ %p: " + "Card removed waiting for frame allocation.\n", + hw->iobase); + return -ENODEV; + } + + if (! (reg & HERMES_EV_ALLOC)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for frame allocation\n", + hw->iobase); + return -ETIMEDOUT; + } + + *fid = hermes_read_regn(hw, ALLOCFID); + hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); + + return 0; +} + + +/* Set up a BAP to read a particular chunk of data from card's internal buffer. + * + * Returns: < 0 on internal failure (errno), 0 on success, >0 on error + * from firmware + * + * Callable from any context */ +static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) +{ + int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0; + int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0; + int k; + u16 reg; + + /* Paranoia.. */ + if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) ) + return -EINVAL; + + k = HERMES_BAP_BUSY_TIMEOUT; + reg = hermes_read_reg(hw, oreg); + while ((reg & HERMES_OFFSET_BUSY) && k) { + k--; + udelay(1); + reg = hermes_read_reg(hw, oreg); + } + +#ifdef HERMES_DEBUG_BUFFER + hw->profile[HERMES_BAP_BUSY_TIMEOUT - k]++; + + if (k < HERMES_BAP_BUSY_TIMEOUT) { + struct hermes_debug_entry *e = + &hw->dbuf[(hw->dbufp++) % HERMES_DEBUG_BUFSIZE]; + e->bap = bap; + e->id = id; + e->offset = offset; + e->cycles = HERMES_BAP_BUSY_TIMEOUT - k; + } +#endif + + if (reg & HERMES_OFFSET_BUSY) + return -ETIMEDOUT; + + /* Now we actually set up the transfer */ + hermes_write_reg(hw, sreg, id); + hermes_write_reg(hw, oreg, offset); + + /* Wait for the BAP to be ready */ + k = HERMES_BAP_BUSY_TIMEOUT; + reg = hermes_read_reg(hw, oreg); + while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { + k--; + udelay(1); + reg = hermes_read_reg(hw, oreg); + } + + if (reg != offset) { + printk(KERN_ERR "hermes @ %p: BAP%d offset %s: " + "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap, + (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", + reg, id, offset); + + if (reg & HERMES_OFFSET_BUSY) { + return -ETIMEDOUT; + } + + return -EIO; /* error or wrong offset */ + } + + return 0; +} + +/* Read a block of data from the chip's buffer, via the + * BAP. Synchronization/serialization is the caller's problem. len + * must be even. + * + * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + */ +int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if ( (len < 0) || (len % 2) ) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Actually do the transfer */ + hermes_read_words(hw, dreg, buf, len/2); + + out: + return err; +} + +/* Write a block of data to the chip's buffer, via the + * BAP. Synchronization/serialization is the caller's problem. len + * must be even. + * + * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + */ +int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if ( (len < 0) || (len % 2) ) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Actually do the transfer */ + hermes_write_words(hw, dreg, buf, len/2); + + out: + return err; +} + +/* Read a Length-Type-Value record from the card. + * + * If length is NULL, we ignore the length read from the card, and + * read the entire buffer regardless. This is useful because some of + * the configuration records appear to have incorrect lengths in + * practice. + * + * Callable from user or bh context. */ +int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, + u16 *length, void *buf) +{ + int err = 0; + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + u16 rlength, rtype; + unsigned nwords; + + if ( (bufsize < 0) || (bufsize % 2) ) + return -EINVAL; + + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); + if (err) + return err; + + err = hermes_bap_seek(hw, bap, rid, 0); + if (err) + return err; + + rlength = hermes_read_reg(hw, dreg); + + if (! rlength) + return -ENODATA; + + rtype = hermes_read_reg(hw, dreg); + + if (length) + *length = rlength; + + if (rtype != rid) + printk(KERN_WARNING "hermes @ %p: %s(): " + "rid (0x%04x) does not match type (0x%04x)\n", + hw->iobase, __FUNCTION__, rid, rtype); + if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) + printk(KERN_WARNING "hermes @ %p: " + "Truncating LTV record from %d to %d bytes. " + "(rid=0x%04x, len=0x%04x)\n", hw->iobase, + HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength); + + nwords = min((unsigned)rlength - 1, bufsize / 2); + hermes_read_words(hw, dreg, buf, nwords); + + return 0; +} + +int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *value) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + unsigned count; + + if (length == 0) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, rid, 0); + if (err) + return err; + + hermes_write_reg(hw, dreg, length); + hermes_write_reg(hw, dreg, rid); + + count = length - 1; + + hermes_write_words(hw, dreg, value, count); + + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, + rid, NULL); + + return err; +} + +EXPORT_SYMBOL(hermes_struct_init); +EXPORT_SYMBOL(hermes_init); +EXPORT_SYMBOL(hermes_docmd_wait); +EXPORT_SYMBOL(hermes_allocate); + +EXPORT_SYMBOL(hermes_bap_pread); +EXPORT_SYMBOL(hermes_bap_pwrite); +EXPORT_SYMBOL(hermes_read_ltv); +EXPORT_SYMBOL(hermes_write_ltv); + +static int __init init_hermes(void) +{ + return 0; +} + +static void __exit exit_hermes(void) +{ +} + +module_init(init_hermes); +module_exit(exit_hermes); diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h new file mode 100644 index 00000000000..8c9e874c911 --- /dev/null +++ b/drivers/net/wireless/hermes.h @@ -0,0 +1,481 @@ +/* hermes.h + * + * Driver core for the "Hermes" wireless MAC controller, as used in + * the Lucent Orinoco and Cabletron RoamAbout cards. It should also + * work on the hfa3841 and hfa3842 MAC controller chips used in the + * Prism I & II chipsets. + * + * This is not a complete driver, just low-level access routines for + * the MAC controller itself. + * + * Based on the prism2 driver from Absolute Value Systems' linux-wlan + * project, the Linux wvlan_cs driver, Lucent's HCF-Light + * (wvlan_hcf.c) library, and the NetBSD wireless driver. + * + * Copyright (C) 2000, David Gibson, Linuxcare Australia. + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * + * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * This file distributed under the GPL, version 2. + */ + +#ifndef _HERMES_H +#define _HERMES_H + +/* Notes on locking: + * + * As a module of low level hardware access routines, there is no + * locking. Users of this module should ensure that they serialize + * access to the hermes_t structure, and to the hardware +*/ + +#include <linux/delay.h> +#include <linux/if_ether.h> +#include <asm/byteorder.h> + +/* + * Limits and constants + */ +#define HERMES_ALLOC_LEN_MIN (4) +#define HERMES_ALLOC_LEN_MAX (2400) +#define HERMES_LTV_LEN_MAX (34) +#define HERMES_BAP_DATALEN_MAX (4096) +#define HERMES_BAP_OFFSET_MAX (4096) +#define HERMES_PORTID_MAX (7) +#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1) +#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */ +#define HERMES_PDA_RECS_MAX (200) /* a guess */ +#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */ +#define HERMES_SCANRESULT_MAX (35) +#define HERMES_CHINFORESULT_MAX (8) +#define HERMES_MAX_MULTICAST (16) +#define HERMES_MAGIC (0x7d1f) + +/* + * Hermes register offsets + */ +#define HERMES_CMD (0x00) +#define HERMES_PARAM0 (0x02) +#define HERMES_PARAM1 (0x04) +#define HERMES_PARAM2 (0x06) +#define HERMES_STATUS (0x08) +#define HERMES_RESP0 (0x0A) +#define HERMES_RESP1 (0x0C) +#define HERMES_RESP2 (0x0E) +#define HERMES_INFOFID (0x10) +#define HERMES_RXFID (0x20) +#define HERMES_ALLOCFID (0x22) +#define HERMES_TXCOMPLFID (0x24) +#define HERMES_SELECT0 (0x18) +#define HERMES_OFFSET0 (0x1C) +#define HERMES_DATA0 (0x36) +#define HERMES_SELECT1 (0x1A) +#define HERMES_OFFSET1 (0x1E) +#define HERMES_DATA1 (0x38) +#define HERMES_EVSTAT (0x30) +#define HERMES_INTEN (0x32) +#define HERMES_EVACK (0x34) +#define HERMES_CONTROL (0x14) +#define HERMES_SWSUPPORT0 (0x28) +#define HERMES_SWSUPPORT1 (0x2A) +#define HERMES_SWSUPPORT2 (0x2C) +#define HERMES_AUXPAGE (0x3A) +#define HERMES_AUXOFFSET (0x3C) +#define HERMES_AUXDATA (0x3E) + +/* + * CMD register bitmasks + */ +#define HERMES_CMD_BUSY (0x8000) +#define HERMES_CMD_AINFO (0x7f00) +#define HERMES_CMD_MACPORT (0x0700) +#define HERMES_CMD_RECL (0x0100) +#define HERMES_CMD_WRITE (0x0100) +#define HERMES_CMD_PROGMODE (0x0300) +#define HERMES_CMD_CMDCODE (0x003f) + +/* + * STATUS register bitmasks + */ +#define HERMES_STATUS_RESULT (0x7f00) +#define HERMES_STATUS_CMDCODE (0x003f) + +/* + * OFFSET register bitmasks + */ +#define HERMES_OFFSET_BUSY (0x8000) +#define HERMES_OFFSET_ERR (0x4000) +#define HERMES_OFFSET_DATAOFF (0x0ffe) + +/* + * Event register bitmasks (INTEN, EVSTAT, EVACK) + */ +#define HERMES_EV_TICK (0x8000) +#define HERMES_EV_WTERR (0x4000) +#define HERMES_EV_INFDROP (0x2000) +#define HERMES_EV_INFO (0x0080) +#define HERMES_EV_DTIM (0x0020) +#define HERMES_EV_CMD (0x0010) +#define HERMES_EV_ALLOC (0x0008) +#define HERMES_EV_TXEXC (0x0004) +#define HERMES_EV_TX (0x0002) +#define HERMES_EV_RX (0x0001) + +/* + * Command codes + */ +/*--- Controller Commands ----------------------------*/ +#define HERMES_CMD_INIT (0x0000) +#define HERMES_CMD_ENABLE (0x0001) +#define HERMES_CMD_DISABLE (0x0002) +#define HERMES_CMD_DIAG (0x0003) + +/*--- Buffer Mgmt Commands ---------------------------*/ +#define HERMES_CMD_ALLOC (0x000A) +#define HERMES_CMD_TX (0x000B) + +/*--- Regulate Commands ------------------------------*/ +#define HERMES_CMD_NOTIFY (0x0010) +#define HERMES_CMD_INQUIRE (0x0011) + +/*--- Configure Commands -----------------------------*/ +#define HERMES_CMD_ACCESS (0x0021) +#define HERMES_CMD_DOWNLD (0x0022) + +/*--- Serial I/O Commands ----------------------------*/ +#define HERMES_CMD_READMIF (0x0030) +#define HERMES_CMD_WRITEMIF (0x0031) + +/*--- Debugging Commands -----------------------------*/ +#define HERMES_CMD_TEST (0x0038) + + +/* Test command arguments */ +#define HERMES_TEST_SET_CHANNEL 0x0800 +#define HERMES_TEST_MONITOR 0x0b00 +#define HERMES_TEST_STOP 0x0f00 + +/* Authentication algorithms */ +#define HERMES_AUTH_OPEN 1 +#define HERMES_AUTH_SHARED_KEY 2 + +/* WEP settings */ +#define HERMES_WEP_PRIVACY_INVOKED 0x0001 +#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002 +#define HERMES_WEP_HOST_ENCRYPT 0x0010 +#define HERMES_WEP_HOST_DECRYPT 0x0080 + +/* Symbol hostscan options */ +#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001 +#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002 +#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040 +#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080 + +/* + * Frame structures and constants + */ + +#define HERMES_DESCRIPTOR_OFFSET 0 +#define HERMES_802_11_OFFSET (14) +#define HERMES_802_3_OFFSET (14+32) +#define HERMES_802_2_OFFSET (14+32+14) + +#define HERMES_RXSTAT_ERR (0x0003) +#define HERMES_RXSTAT_BADCRC (0x0001) +#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) +#define HERMES_RXSTAT_MACPORT (0x0700) +#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ +#define HERMES_RXSTAT_MSGTYPE (0xE000) +#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ +#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ +#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ + +struct hermes_tx_descriptor { + u16 status; + u16 reserved1; + u16 reserved2; + u32 sw_support; + u8 retry_count; + u8 tx_rate; + u16 tx_control; +} __attribute__ ((packed)); + +#define HERMES_TXSTAT_RETRYERR (0x0001) +#define HERMES_TXSTAT_AGEDERR (0x0002) +#define HERMES_TXSTAT_DISCON (0x0004) +#define HERMES_TXSTAT_FORMERR (0x0008) + +#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ +#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ +#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ +#define HERMES_TXCTRL_ALT_RTRY (0x0020) + +/* Inquiry constants and data types */ + +#define HERMES_INQ_TALLIES (0xF100) +#define HERMES_INQ_SCAN (0xF101) +#define HERMES_INQ_CHANNELINFO (0xF102) +#define HERMES_INQ_HOSTSCAN (0xF103) +#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104) +#define HERMES_INQ_LINKSTATUS (0xF200) +#define HERMES_INQ_SEC_STAT_AGERE (0xF202) + +struct hermes_tallies_frame { + u16 TxUnicastFrames; + u16 TxMulticastFrames; + u16 TxFragments; + u16 TxUnicastOctets; + u16 TxMulticastOctets; + u16 TxDeferredTransmissions; + u16 TxSingleRetryFrames; + u16 TxMultipleRetryFrames; + u16 TxRetryLimitExceeded; + u16 TxDiscards; + u16 RxUnicastFrames; + u16 RxMulticastFrames; + u16 RxFragments; + u16 RxUnicastOctets; + u16 RxMulticastOctets; + u16 RxFCSErrors; + u16 RxDiscards_NoBuffer; + u16 TxDiscardsWrongSA; + u16 RxWEPUndecryptable; + u16 RxMsgInMsgFragments; + u16 RxMsgInBadMsgFragments; + /* Those last are probably not available in very old firmwares */ + u16 RxDiscards_WEPICVError; + u16 RxDiscards_WEPExcluded; +} __attribute__ ((packed)); + +/* Grabbed from wlan-ng - Thanks Mark... - Jean II + * This is the result of a scan inquiry command */ +/* Structure describing info about an Access Point */ +struct prism2_scan_apinfo { + u16 channel; /* Channel where the AP sits */ + u16 noise; /* Noise level */ + u16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + u16 beacon_interv; /* Beacon interval */ + u16 capabilities; /* Capabilities */ + u16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ + u8 rates[10]; /* Bit rate supported */ + u16 proberesp_rate; /* Data rate of the response frame */ + u16 atim; /* ATIM window time, Kus (hostscan only) */ +} __attribute__ ((packed)); + +/* Same stuff for the Lucent/Agere card. + * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */ +struct agere_scan_apinfo { + u16 channel; /* Channel where the AP sits */ + u16 noise; /* Noise level */ + u16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + u16 beacon_interv; /* Beacon interval */ + u16 capabilities; /* Capabilities */ + /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ + u16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ +} __attribute__ ((packed)); + +/* Moustafa: Scan structure for Symbol cards */ +struct symbol_scan_apinfo { + u8 channel; /* Channel where the AP sits */ + u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ + u16 noise; /* Noise level */ + u16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + u16 beacon_interv; /* Beacon interval */ + u16 capabilities; /* Capabilities */ + /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ + u16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ + u16 rates[5]; /* Bit rate supported */ + u16 basic_rates; /* Basic rates bitmask */ + u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ + u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ +} __attribute__ ((packed)); + +union hermes_scan_info { + struct agere_scan_apinfo a; + struct prism2_scan_apinfo p; + struct symbol_scan_apinfo s; +}; + +#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) +#define HERMES_LINKSTATUS_CONNECTED (0x0001) +#define HERMES_LINKSTATUS_DISCONNECTED (0x0002) +#define HERMES_LINKSTATUS_AP_CHANGE (0x0003) +#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) +#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) +#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) + +struct hermes_linkstatus { + u16 linkstatus; /* Link status */ +} __attribute__ ((packed)); + +struct hermes_response { + u16 status, resp0, resp1, resp2; +}; + +/* "ID" structure - used for ESSID and station nickname */ +struct hermes_idstring { + u16 len; + u16 val[16]; +} __attribute__ ((packed)); + +struct hermes_multicast { + u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN]; +} __attribute__ ((packed)); + +// #define HERMES_DEBUG_BUFFER 1 +#define HERMES_DEBUG_BUFSIZE 4096 +struct hermes_debug_entry { + int bap; + u16 id, offset; + int cycles; +}; + +#ifdef __KERNEL__ + +/* Timeouts */ +#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ + +/* Basic control structure */ +typedef struct hermes { + void __iomem *iobase; + int reg_spacing; +#define HERMES_16BIT_REGSPACING 0 +#define HERMES_32BIT_REGSPACING 1 + + u16 inten; /* Which interrupts should be enabled? */ + +#ifdef HERMES_DEBUG_BUFFER + struct hermes_debug_entry dbuf[HERMES_DEBUG_BUFSIZE]; + unsigned long dbufp; + unsigned long profile[HERMES_BAP_BUSY_TIMEOUT+1]; +#endif +} hermes_t; + +/* Register access convenience macros */ +#define hermes_read_reg(hw, off) \ + (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing ))) +#define hermes_write_reg(hw, off, val) \ + (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) +#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) +#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val)) + +/* Function prototypes */ +void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); +int hermes_init(hermes_t *hw); +int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp); +int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); + +int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, + u16 id, u16 offset); +int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, + u16 id, u16 offset); +int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, + u16 *length, void *buf); +int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *value); + +/* Inline functions */ + +static inline int hermes_present(hermes_t *hw) +{ + return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC; +} + +static inline void hermes_set_irqmask(hermes_t *hw, u16 events) +{ + hw->inten = events; + hermes_write_regn(hw, INTEN, events); +} + +static inline int hermes_enable_port(hermes_t *hw, int port) +{ + return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), + 0, NULL); +} + +static inline int hermes_disable_port(hermes_t *hw, int port) +{ + return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), + 0, NULL); +} + +/* Initiate an INQUIRE command (tallies or scan). The result will come as an + * information frame in __orinoco_ev_info() */ +static inline int hermes_inquire(hermes_t *hw, u16 rid) +{ + return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); +} + +#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 ) +#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 ) + +/* Note that for the next two, the count is in 16-bit words, not bytes */ +static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count) +{ + off = off << hw->reg_spacing; + ioread16_rep(hw->iobase + off, buf, count); +} + +static inline void hermes_write_words(struct hermes *hw, int off, const void *buf, unsigned count) +{ + off = off << hw->reg_spacing; + iowrite16_rep(hw->iobase + off, buf, count); +} + +static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count) +{ + unsigned i; + + off = off << hw->reg_spacing; + + for (i = 0; i < count; i++) + iowrite16(0, hw->iobase + off); +} + +#define HERMES_READ_RECORD(hw, bap, rid, buf) \ + (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf))) +#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ + (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf))) + +static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) +{ + u16 rec; + int err; + + err = HERMES_READ_RECORD(hw, bap, rid, &rec); + *word = le16_to_cpu(rec); + return err; +} + +static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word) +{ + u16 rec = cpu_to_le16(word); + return HERMES_WRITE_RECORD(hw, bap, rid, &rec); +} + +#else /* ! __KERNEL__ */ + +/* These are provided for the benefit of userspace drivers and testing programs + which use ioperm() or iopl() */ + +#define hermes_read_reg(base, off) (inw((base) + (off))) +#define hermes_write_reg(base, off, val) (outw((val), (base) + (off))) + +#define hermes_read_regn(base, name) (hermes_read_reg((base), HERMES_##name)) +#define hermes_write_regn(base, name, val) (hermes_write_reg((base), HERMES_##name, (val))) + +/* Note that for the next two, the count is in 16-bit words, not bytes */ +#define hermes_read_data(base, off, buf, count) (insw((base) + (off), (buf), (count))) +#define hermes_write_data(base, off, buf, count) (outsw((base) + (off), (buf), (count))) + +#endif /* ! __KERNEL__ */ + +#endif /* _HERMES_H */ diff --git a/drivers/net/wireless/hermes_rid.h b/drivers/net/wireless/hermes_rid.h new file mode 100644 index 00000000000..4f46b4809e5 --- /dev/null +++ b/drivers/net/wireless/hermes_rid.h @@ -0,0 +1,148 @@ +#ifndef _HERMES_RID_H +#define _HERMES_RID_H + +/* + * Configuration RIDs + */ +#define HERMES_RID_CNFPORTTYPE 0xFC00 +#define HERMES_RID_CNFOWNMACADDR 0xFC01 +#define HERMES_RID_CNFDESIREDSSID 0xFC02 +#define HERMES_RID_CNFOWNCHANNEL 0xFC03 +#define HERMES_RID_CNFOWNSSID 0xFC04 +#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05 +#define HERMES_RID_CNFSYSTEMSCALE 0xFC06 +#define HERMES_RID_CNFMAXDATALEN 0xFC07 +#define HERMES_RID_CNFWDSADDRESS 0xFC08 +#define HERMES_RID_CNFPMENABLED 0xFC09 +#define HERMES_RID_CNFPMEPS 0xFC0A +#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B +#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C +#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D +#define HERMES_RID_CNFOWNNAME 0xFC0E +#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10 +#define HERMES_RID_CNFWDSADDRESS1 0xFC11 +#define HERMES_RID_CNFWDSADDRESS2 0xFC12 +#define HERMES_RID_CNFWDSADDRESS3 0xFC13 +#define HERMES_RID_CNFWDSADDRESS4 0xFC14 +#define HERMES_RID_CNFWDSADDRESS5 0xFC15 +#define HERMES_RID_CNFWDSADDRESS6 0xFC16 +#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17 +#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 +#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 +#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 +#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 +#define HERMES_RID_CNFDEFAULTKEY0 0xFC24 +#define HERMES_RID_CNFDEFAULTKEY1 0xFC25 +#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25 +#define HERMES_RID_CNFDEFAULTKEY2 0xFC26 +#define HERMES_RID_CNFDEFAULTKEY3 0xFC27 +#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28 +#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 +#define HERMES_RID_CNFAUTHENTICATION 0xFC2A +#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B +#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B +#define HERMES_RID_CNFTXCONTROL 0xFC2C +#define HERMES_RID_CNFROAMINGMODE 0xFC2D +#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E +#define HERMES_RID_CNFRCVCRCERROR 0xFC30 +#define HERMES_RID_CNFMMLIFE 0xFC31 +#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32 +#define HERMES_RID_CNFBEACONINT 0xFC33 +#define HERMES_RID_CNFAPPCFINFO 0xFC34 +#define HERMES_RID_CNFSTAPCFINFO 0xFC35 +#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37 +#define HERMES_RID_CNFTIMCTRL 0xFC40 +#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42 +#define HERMES_RID_CNFENHSECURITY 0xFC43 +#define HERMES_RID_CNFGROUPADDRESSES 0xFC80 +#define HERMES_RID_CNFCREATEIBSS 0xFC81 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82 +#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83 +#define HERMES_RID_CNFTXRATECONTROL 0xFC84 +#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85 +#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A +#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96 +#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97 +#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98 +#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99 +#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A +#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B +#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C +#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D +#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB +#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0 +#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0 +#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 +#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1 +#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 +#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 +#define HERMES_RID_CNFBASICRATES 0xFCB3 +#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HERMES_RID_CNFTICKTIME 0xFCE0 +#define HERMES_RID_CNFSCANREQUEST 0xFCE1 +#define HERMES_RID_CNFJOINREQUEST 0xFCE2 +#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3 +#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4 +#define HERMES_RID_CNFHOSTSCAN 0xFCE5 + +/* + * Information RIDs + */ +#define HERMES_RID_MAXLOADTIME 0xFD00 +#define HERMES_RID_DOWNLOADBUFFER 0xFD01 +#define HERMES_RID_PRIID 0xFD02 +#define HERMES_RID_PRISUPRANGE 0xFD03 +#define HERMES_RID_CFIACTRANGES 0xFD04 +#define HERMES_RID_NICSERNUM 0xFD0A +#define HERMES_RID_NICID 0xFD0B +#define HERMES_RID_MFISUPRANGE 0xFD0C +#define HERMES_RID_CFISUPRANGE 0xFD0D +#define HERMES_RID_CHANNELLIST 0xFD10 +#define HERMES_RID_REGULATORYDOMAINS 0xFD11 +#define HERMES_RID_TEMPTYPE 0xFD12 +#define HERMES_RID_CIS 0xFD13 +#define HERMES_RID_STAID 0xFD20 +#define HERMES_RID_STASUPRANGE 0xFD21 +#define HERMES_RID_MFIACTRANGES 0xFD22 +#define HERMES_RID_CFIACTRANGES2 0xFD23 +#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24 +#define HERMES_RID_PORTSTATUS 0xFD40 +#define HERMES_RID_CURRENTSSID 0xFD41 +#define HERMES_RID_CURRENTBSSID 0xFD42 +#define HERMES_RID_COMMSQUALITY 0xFD43 +#define HERMES_RID_CURRENTTXRATE 0xFD44 +#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45 +#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46 +#define HERMES_RID_PROTOCOLRSPTIME 0xFD47 +#define HERMES_RID_SHORTRETRYLIMIT 0xFD48 +#define HERMES_RID_LONGRETRYLIMIT 0xFD49 +#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A +#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B +#define HERMES_RID_CFPOLLABLE 0xFD4C +#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D +#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F +#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51 +#define HERMES_RID_CURRENTTXRATE1 0xFD80 +#define HERMES_RID_CURRENTTXRATE2 0xFD81 +#define HERMES_RID_CURRENTTXRATE3 0xFD82 +#define HERMES_RID_CURRENTTXRATE4 0xFD83 +#define HERMES_RID_CURRENTTXRATE5 0xFD84 +#define HERMES_RID_CURRENTTXRATE6 0xFD85 +#define HERMES_RID_OWNMACADDR 0xFD86 +#define HERMES_RID_SCANRESULTSTABLE 0xFD88 +#define HERMES_RID_PHYTYPE 0xFDC0 +#define HERMES_RID_CURRENTCHANNEL 0xFDC1 +#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 +#define HERMES_RID_CCAMODE 0xFDC3 +#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6 +#define HERMES_RID_BUILDSEQ 0xFFFE +#define HERMES_RID_FWID 0xFFFF + +#endif diff --git a/drivers/net/wireless/i82586.h b/drivers/net/wireless/i82586.h new file mode 100644 index 00000000000..5f65b250646 --- /dev/null +++ b/drivers/net/wireless/i82586.h @@ -0,0 +1,413 @@ +/* + * Intel 82586 IEEE 802.3 Ethernet LAN Coprocessor. + * + * See: + * Intel Microcommunications 1991 + * p1-1 to p1-37 + * Intel order No. 231658 + * ISBN 1-55512-119-5 + * + * Unfortunately, the above chapter mentions neither + * the System Configuration Pointer (SCP) nor the + * Intermediate System Configuration Pointer (ISCP), + * so we probably need to look elsewhere for the + * whole story -- some recommend the "Intel LAN + * Components manual" but I have neither a copy + * nor a full reference. But "elsewhere" may be + * in the same publication... + * The description of a later device, the + * "82596CA High-Performance 32-Bit Local Area Network + * Coprocessor", (ibid. p1-38 to p1-109) does mention + * the SCP and ISCP and also has an i82586 compatibility + * mode. Even more useful is "AP-235 An 82586 Data Link + * Driver" (ibid. p1-337 to p1-417). + */ + +#define I82586_MEMZ (64 * 1024) + +#define I82586_SCP_ADDR (I82586_MEMZ - sizeof(scp_t)) + +#define ADDR_LEN 6 +#define I82586NULL 0xFFFF + +#define toff(t,p,f) (unsigned short)((void *)(&((t *)((void *)0 + (p)))->f) - (void *)0) + +/* + * System Configuration Pointer (SCP). + */ +typedef struct scp_t scp_t; +struct scp_t +{ + unsigned short scp_sysbus; /* 82586 bus width: */ +#define SCP_SY_16BBUS (0x0 << 0) /* 16 bits */ +#define SCP_SY_8BBUS (0x1 << 0) /* 8 bits. */ + unsigned short scp_junk[2]; /* Unused */ + unsigned short scp_iscpl; /* lower 16 bits of ISCP_ADDR */ + unsigned short scp_iscph; /* upper 16 bits of ISCP_ADDR */ +}; + +/* + * Intermediate System Configuration Pointer (ISCP). + */ +typedef struct iscp_t iscp_t; +struct iscp_t +{ + unsigned short iscp_busy; /* set by CPU before first CA, */ + /* cleared by 82586 after read. */ + unsigned short iscp_offset; /* offset of SCB */ + unsigned short iscp_basel; /* base of SCB */ + unsigned short iscp_baseh; /* " */ +}; + +/* + * System Control Block (SCB). + * The 82586 writes its status to scb_status and then + * raises an interrupt to alert the CPU. + * The CPU writes a command to scb_command and + * then issues a Channel Attention (CA) to alert the 82586. + */ +typedef struct scb_t scb_t; +struct scb_t +{ + unsigned short scb_status; /* Status of 82586 */ +#define SCB_ST_INT (0xF << 12) /* Some of: */ +#define SCB_ST_CX (0x1 << 15) /* Cmd completed */ +#define SCB_ST_FR (0x1 << 14) /* Frame received */ +#define SCB_ST_CNA (0x1 << 13) /* Cmd unit not active */ +#define SCB_ST_RNR (0x1 << 12) /* Rcv unit not ready */ +#define SCB_ST_JUNK0 (0x1 << 11) /* 0 */ +#define SCB_ST_CUS (0x7 << 8) /* Cmd unit status */ +#define SCB_ST_CUS_IDLE (0 << 8) /* Idle */ +#define SCB_ST_CUS_SUSP (1 << 8) /* Suspended */ +#define SCB_ST_CUS_ACTV (2 << 8) /* Active */ +#define SCB_ST_JUNK1 (0x1 << 7) /* 0 */ +#define SCB_ST_RUS (0x7 << 4) /* Rcv unit status */ +#define SCB_ST_RUS_IDLE (0 << 4) /* Idle */ +#define SCB_ST_RUS_SUSP (1 << 4) /* Suspended */ +#define SCB_ST_RUS_NRES (2 << 4) /* No resources */ +#define SCB_ST_RUS_RDY (4 << 4) /* Ready */ + unsigned short scb_command; /* Next command */ +#define SCB_CMD_ACK_CX (0x1 << 15) /* Ack cmd completion */ +#define SCB_CMD_ACK_FR (0x1 << 14) /* Ack frame received */ +#define SCB_CMD_ACK_CNA (0x1 << 13) /* Ack CU not active */ +#define SCB_CMD_ACK_RNR (0x1 << 12) /* Ack RU not ready */ +#define SCB_CMD_JUNKX (0x1 << 11) /* Unused */ +#define SCB_CMD_CUC (0x7 << 8) /* Command Unit command */ +#define SCB_CMD_CUC_NOP (0 << 8) /* Nop */ +#define SCB_CMD_CUC_GO (1 << 8) /* Start cbl_offset */ +#define SCB_CMD_CUC_RES (2 << 8) /* Resume execution */ +#define SCB_CMD_CUC_SUS (3 << 8) /* Suspend " */ +#define SCB_CMD_CUC_ABT (4 << 8) /* Abort " */ +#define SCB_CMD_RESET (0x1 << 7) /* Reset chip (hardware) */ +#define SCB_CMD_RUC (0x7 << 4) /* Receive Unit command */ +#define SCB_CMD_RUC_NOP (0 << 4) /* Nop */ +#define SCB_CMD_RUC_GO (1 << 4) /* Start rfa_offset */ +#define SCB_CMD_RUC_RES (2 << 4) /* Resume reception */ +#define SCB_CMD_RUC_SUS (3 << 4) /* Suspend " */ +#define SCB_CMD_RUC_ABT (4 << 4) /* Abort " */ + unsigned short scb_cbl_offset; /* Offset of first command unit */ + /* Action Command */ + unsigned short scb_rfa_offset; /* Offset of first Receive */ + /* Frame Descriptor in the */ + /* Receive Frame Area */ + unsigned short scb_crcerrs; /* Properly aligned frames */ + /* received with a CRC error */ + unsigned short scb_alnerrs; /* Misaligned frames received */ + /* with a CRC error */ + unsigned short scb_rscerrs; /* Frames lost due to no space */ + unsigned short scb_ovrnerrs; /* Frames lost due to slow bus */ +}; + +#define scboff(p,f) toff(scb_t, p, f) + +/* + * The eight Action Commands. + */ +typedef enum acmd_e acmd_e; +enum acmd_e +{ + acmd_nop = 0, /* Do nothing */ + acmd_ia_setup = 1, /* Load an (ethernet) address into the */ + /* 82586 */ + acmd_configure = 2, /* Update the 82586 operating parameters */ + acmd_mc_setup = 3, /* Load a list of (ethernet) multicast */ + /* addresses into the 82586 */ + acmd_transmit = 4, /* Transmit a frame */ + acmd_tdr = 5, /* Perform a Time Domain Reflectometer */ + /* test on the serial link */ + acmd_dump = 6, /* Copy 82586 registers to memory */ + acmd_diagnose = 7, /* Run an internal self test */ +}; + +/* + * Generic Action Command header. + */ +typedef struct ach_t ach_t; +struct ach_t +{ + unsigned short ac_status; /* Command status: */ +#define AC_SFLD_C (0x1 << 15) /* Command completed */ +#define AC_SFLD_B (0x1 << 14) /* Busy executing */ +#define AC_SFLD_OK (0x1 << 13) /* Completed error free */ +#define AC_SFLD_A (0x1 << 12) /* Command aborted */ +#define AC_SFLD_FAIL (0x1 << 11) /* Selftest failed */ +#define AC_SFLD_S10 (0x1 << 10) /* No carrier sense */ + /* during transmission */ +#define AC_SFLD_S9 (0x1 << 9) /* Tx unsuccessful: */ + /* (stopped) lost CTS */ +#define AC_SFLD_S8 (0x1 << 8) /* Tx unsuccessful: */ + /* (stopped) slow DMA */ +#define AC_SFLD_S7 (0x1 << 7) /* Tx deferred: */ + /* other link traffic */ +#define AC_SFLD_S6 (0x1 << 6) /* Heart Beat: collision */ + /* detect after last tx */ +#define AC_SFLD_S5 (0x1 << 5) /* Tx stopped: */ + /* excessive collisions */ +#define AC_SFLD_MAXCOL (0xF << 0) /* Collision count */ + unsigned short ac_command; /* Command specifier: */ +#define AC_CFLD_EL (0x1 << 15) /* End of command list */ +#define AC_CFLD_S (0x1 << 14) /* Suspend on completion */ +#define AC_CFLD_I (0x1 << 13) /* Interrupt on completion */ +#define AC_CFLD_CMD (0x7 << 0) /* acmd_e */ + unsigned short ac_link; /* Next Action Command */ +}; + +#define acoff(p,f) toff(ach_t, p, f) + +/* + * The Nop Action Command. + */ +typedef struct ac_nop_t ac_nop_t; +struct ac_nop_t +{ + ach_t nop_h; +}; + +/* + * The IA-Setup Action Command. + */ +typedef struct ac_ias_t ac_ias_t; +struct ac_ias_t +{ + ach_t ias_h; + unsigned char ias_addr[ADDR_LEN]; /* The (ethernet) address */ +}; + +/* + * The Configure Action Command. + */ +typedef struct ac_cfg_t ac_cfg_t; +struct ac_cfg_t +{ + ach_t cfg_h; + unsigned char cfg_byte_cnt; /* Size foll data: 4-12 */ +#define AC_CFG_BYTE_CNT(v) (((v) & 0xF) << 0) + unsigned char cfg_fifolim; /* FIFO threshold */ +#define AC_CFG_FIFOLIM(v) (((v) & 0xF) << 0) + unsigned char cfg_byte8; +#define AC_CFG_SAV_BF(v) (((v) & 0x1) << 7) /* Save rxd bad frames */ +#define AC_CFG_SRDY(v) (((v) & 0x1) << 6) /* SRDY/ARDY pin means */ + /* external sync. */ + unsigned char cfg_byte9; +#define AC_CFG_ELPBCK(v) (((v) & 0x1) << 7) /* External loopback */ +#define AC_CFG_ILPBCK(v) (((v) & 0x1) << 6) /* Internal loopback */ +#define AC_CFG_PRELEN(v) (((v) & 0x3) << 4) /* Preamble length */ +#define AC_CFG_PLEN_2 0 /* 2 bytes */ +#define AC_CFG_PLEN_4 1 /* 4 bytes */ +#define AC_CFG_PLEN_8 2 /* 8 bytes */ +#define AC_CFG_PLEN_16 3 /* 16 bytes */ +#define AC_CFG_ALOC(v) (((v) & 0x1) << 3) /* Addr/len data is */ + /* explicit in buffers */ +#define AC_CFG_ADDRLEN(v) (((v) & 0x7) << 0) /* Bytes per address */ + unsigned char cfg_byte10; +#define AC_CFG_BOFMET(v) (((v) & 0x1) << 7) /* Use alternate expo. */ + /* backoff method */ +#define AC_CFG_ACR(v) (((v) & 0x7) << 4) /* Accelerated cont. res. */ +#define AC_CFG_LINPRIO(v) (((v) & 0x7) << 0) /* Linear priority */ + unsigned char cfg_ifs; /* Interframe spacing */ + unsigned char cfg_slotl; /* Slot time (low byte) */ + unsigned char cfg_byte13; +#define AC_CFG_RETRYNUM(v) (((v) & 0xF) << 4) /* Max. collision retry */ +#define AC_CFG_SLTTMHI(v) (((v) & 0x7) << 0) /* Slot time (high bits) */ + unsigned char cfg_byte14; +#define AC_CFG_FLGPAD(v) (((v) & 0x1) << 7) /* Pad with HDLC flags */ +#define AC_CFG_BTSTF(v) (((v) & 0x1) << 6) /* Do HDLC bitstuffing */ +#define AC_CFG_CRC16(v) (((v) & 0x1) << 5) /* 16 bit CCITT CRC */ +#define AC_CFG_NCRC(v) (((v) & 0x1) << 4) /* Insert no CRC */ +#define AC_CFG_TNCRS(v) (((v) & 0x1) << 3) /* Tx even if no carrier */ +#define AC_CFG_MANCH(v) (((v) & 0x1) << 2) /* Manchester coding */ +#define AC_CFG_BCDIS(v) (((v) & 0x1) << 1) /* Disable broadcast */ +#define AC_CFG_PRM(v) (((v) & 0x1) << 0) /* Promiscuous mode */ + unsigned char cfg_byte15; +#define AC_CFG_ICDS(v) (((v) & 0x1) << 7) /* Internal collision */ + /* detect source */ +#define AC_CFG_CDTF(v) (((v) & 0x7) << 4) /* Collision detect */ + /* filter in bit times */ +#define AC_CFG_ICSS(v) (((v) & 0x1) << 3) /* Internal carrier */ + /* sense source */ +#define AC_CFG_CSTF(v) (((v) & 0x7) << 0) /* Carrier sense */ + /* filter in bit times */ + unsigned short cfg_min_frm_len; +#define AC_CFG_MNFRM(v) (((v) & 0xFF) << 0) /* Min. bytes/frame (<= 255) */ +}; + +/* + * The MC-Setup Action Command. + */ +typedef struct ac_mcs_t ac_mcs_t; +struct ac_mcs_t +{ + ach_t mcs_h; + unsigned short mcs_cnt; /* No. of bytes of MC addresses */ +#if 0 + unsigned char mcs_data[ADDR_LEN]; /* The first MC address .. */ + ... +#endif +}; + +#define I82586_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ + +/* + * The Transmit Action Command. + */ +typedef struct ac_tx_t ac_tx_t; +struct ac_tx_t +{ + ach_t tx_h; + unsigned short tx_tbd_offset; /* Address of list of buffers. */ +#if 0 +Linux packets are passed down with the destination MAC address +and length/type field already prepended to the data, +so we do not need to insert it. Consistent with this +we must also set the AC_CFG_ALOC(..) flag during the +ac_cfg_t action command. + unsigned char tx_addr[ADDR_LEN]; /* The frame dest. address */ + unsigned short tx_length; /* The frame length */ +#endif /* 0 */ +}; + +/* + * The Time Domain Reflectometer Action Command. + */ +typedef struct ac_tdr_t ac_tdr_t; +struct ac_tdr_t +{ + ach_t tdr_h; + unsigned short tdr_result; /* Result. */ +#define AC_TDR_LNK_OK (0x1 << 15) /* No link problem */ +#define AC_TDR_XCVR_PRB (0x1 << 14) /* Txcvr cable problem */ +#define AC_TDR_ET_OPN (0x1 << 13) /* Open on the link */ +#define AC_TDR_ET_SRT (0x1 << 12) /* Short on the link */ +#define AC_TDR_TIME (0x7FF << 0) /* Distance to problem */ + /* site in transmit */ + /* clock cycles */ +}; + +/* + * The Dump Action Command. + */ +typedef struct ac_dmp_t ac_dmp_t; +struct ac_dmp_t +{ + ach_t dmp_h; + unsigned short dmp_offset; /* Result. */ +}; + +/* + * Size of the result of the dump command. + */ +#define DUMPBYTES 170 + +/* + * The Diagnose Action Command. + */ +typedef struct ac_dgn_t ac_dgn_t; +struct ac_dgn_t +{ + ach_t dgn_h; +}; + +/* + * Transmit Buffer Descriptor (TBD). + */ +typedef struct tbd_t tbd_t; +struct tbd_t +{ + unsigned short tbd_status; /* Written by the CPU */ +#define TBD_STATUS_EOF (0x1 << 15) /* This TBD is the */ + /* last for this frame */ +#define TBD_STATUS_ACNT (0x3FFF << 0) /* Actual count of data */ + /* bytes in this buffer */ + unsigned short tbd_next_bd_offset; /* Next in list */ + unsigned short tbd_bufl; /* Buffer address (low) */ + unsigned short tbd_bufh; /* " " (high) */ +}; + +/* + * Receive Buffer Descriptor (RBD). + */ +typedef struct rbd_t rbd_t; +struct rbd_t +{ + unsigned short rbd_status; /* Written by the 82586 */ +#define RBD_STATUS_EOF (0x1 << 15) /* This RBD is the */ + /* last for this frame */ +#define RBD_STATUS_F (0x1 << 14) /* ACNT field is valid */ +#define RBD_STATUS_ACNT (0x3FFF << 0) /* Actual no. of data */ + /* bytes in this buffer */ + unsigned short rbd_next_rbd_offset; /* Next rbd in list */ + unsigned short rbd_bufl; /* Data pointer (low) */ + unsigned short rbd_bufh; /* " " (high) */ + unsigned short rbd_el_size; /* EL+Data buf. size */ +#define RBD_EL (0x1 << 15) /* This BD is the */ + /* last in the list */ +#define RBD_SIZE (0x3FFF << 0) /* No. of bytes the */ + /* buffer can hold */ +}; + +#define rbdoff(p,f) toff(rbd_t, p, f) + +/* + * Frame Descriptor (FD). + */ +typedef struct fd_t fd_t; +struct fd_t +{ + unsigned short fd_status; /* Written by the 82586 */ +#define FD_STATUS_C (0x1 << 15) /* Completed storing frame */ +#define FD_STATUS_B (0x1 << 14) /* FD was consumed by RU */ +#define FD_STATUS_OK (0x1 << 13) /* Frame rxd successfully */ +#define FD_STATUS_S11 (0x1 << 11) /* CRC error */ +#define FD_STATUS_S10 (0x1 << 10) /* Alignment error */ +#define FD_STATUS_S9 (0x1 << 9) /* Ran out of resources */ +#define FD_STATUS_S8 (0x1 << 8) /* Rx DMA overrun */ +#define FD_STATUS_S7 (0x1 << 7) /* Frame too short */ +#define FD_STATUS_S6 (0x1 << 6) /* No EOF flag */ + unsigned short fd_command; /* Command */ +#define FD_COMMAND_EL (0x1 << 15) /* Last FD in list */ +#define FD_COMMAND_S (0x1 << 14) /* Suspend RU after rx */ + unsigned short fd_link_offset; /* Next FD */ + unsigned short fd_rbd_offset; /* First RBD (data) */ + /* Prepared by CPU, */ + /* updated by 82586 */ +#if 0 +I think the rest is unused since we +have set AC_CFG_ALOC(..). However, just +in case, we leave the space. +#endif /* 0 */ + unsigned char fd_dest[ADDR_LEN]; /* Destination address */ + /* Written by 82586 */ + unsigned char fd_src[ADDR_LEN]; /* Source address */ + /* Written by 82586 */ + unsigned short fd_length; /* Frame length or type */ + /* Written by 82586 */ +}; + +#define fdoff(p,f) toff(fd_t, p, f) + +/* + * This software may only be used and distributed + * according to the terms of the GNU General Public License. + * + * For more details, see wavelan.c. + */ diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h new file mode 100644 index 00000000000..33acb8add4d --- /dev/null +++ b/drivers/net/wireless/i82593.h @@ -0,0 +1,224 @@ +/* + * Definitions for Intel 82593 CSMA/CD Core LAN Controller + * The definitions are taken from the 1992 users manual with Intel + * order number 297125-001. + * + * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp + * + * Copyright 1994, Anders Klemets <klemets@it.kth.se> + * + * This software may be freely distributed for noncommercial purposes + * as long as this notice is retained. + * + * HISTORY + * i82593.h,v + * Revision 1.1 1996/07/17 15:23:12 root + * Initial revision + * + * Revision 1.3 1995/04/05 15:13:58 adj + * Initial alpha release + * + * Revision 1.2 1994/06/16 23:57:31 klemets + * Mirrored all the fields in the configuration block. + * + * Revision 1.1 1994/06/02 20:25:34 klemets + * Initial revision + * + * + */ +#ifndef _I82593_H +#define _I82593_H + +/* Intel 82593 CSMA/CD Core LAN Controller */ + +/* Port 0 Command Register definitions */ + +/* Execution operations */ +#define OP0_NOP 0 /* CHNL = 0 */ +#define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */ +#define OP0_IA_SETUP 1 +#define OP0_CONFIGURE 2 +#define OP0_MC_SETUP 3 +#define OP0_TRANSMIT 4 +#define OP0_TDR 5 +#define OP0_DUMP 6 +#define OP0_DIAGNOSE 7 +#define OP0_TRANSMIT_NO_CRC 9 +#define OP0_RETRANSMIT 12 +#define OP0_ABORT 13 +/* Reception operations */ +#define OP0_RCV_ENABLE 8 +#define OP0_RCV_DISABLE 10 +#define OP0_STOP_RCV 11 +/* Status pointer control operations */ +#define OP0_FIX_PTR 15 /* CHNL = 1 */ +#define OP0_RLS_PTR 15 /* CHNL = 0 */ +#define OP0_RESET 14 + +#define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */ +#define CR0_STATUS_0 0x00 +#define CR0_STATUS_1 0x20 +#define CR0_STATUS_2 0x40 +#define CR0_STATUS_3 0x60 +#define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */ + +/* Port 0 Status Register definitions */ + +#define SR0_NO_RESULT 0 /* dummy */ +#define SR0_EVENT_MASK 0x0f +#define SR0_IA_SETUP_DONE 1 +#define SR0_CONFIGURE_DONE 2 +#define SR0_MC_SETUP_DONE 3 +#define SR0_TRANSMIT_DONE 4 +#define SR0_TDR_DONE 5 +#define SR0_DUMP_DONE 6 +#define SR0_DIAGNOSE_PASSED 7 +#define SR0_TRANSMIT_NO_CRC_DONE 9 +#define SR0_RETRANSMIT_DONE 12 +#define SR0_EXECUTION_ABORTED 13 +#define SR0_END_OF_FRAME 8 +#define SR0_RECEPTION_ABORTED 10 +#define SR0_DIAGNOSE_FAILED 15 +#define SR0_STOP_REG_HIT 11 + +#define SR0_CHNL (1 << 4) +#define SR0_EXECUTION (1 << 5) +#define SR0_RECEPTION (1 << 6) +#define SR0_INTERRUPT (1 << 7) +#define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION) + +#define SR3_EXEC_STATE_MASK 0x03 +#define SR3_EXEC_IDLE 0 +#define SR3_TX_ABORT_IN_PROGRESS 1 +#define SR3_EXEC_ACTIVE 2 +#define SR3_ABORT_IN_PROGRESS 3 +#define SR3_EXEC_CHNL (1 << 2) +#define SR3_STP_ON_NO_RSRC (1 << 3) +#define SR3_RCVING_NO_RSRC (1 << 4) +#define SR3_RCV_STATE_MASK 0x60 +#define SR3_RCV_IDLE 0x00 +#define SR3_RCV_READY 0x20 +#define SR3_RCV_ACTIVE 0x40 +#define SR3_RCV_STOP_IN_PROG 0x60 +#define SR3_RCV_CHNL (1 << 7) + +/* Port 1 Command Register definitions */ + +#define OP1_NOP 0 +#define OP1_SWIT_TO_PORT_0 1 +#define OP1_INT_DISABLE 2 +#define OP1_INT_ENABLE 3 +#define OP1_SET_TS 5 +#define OP1_RST_TS 7 +#define OP1_POWER_DOWN 8 +#define OP1_RESET_RING_MNGMT 11 +#define OP1_RESET 14 +#define OP1_SEL_RST 15 + +#define CR1_STATUS_4 0x00 +#define CR1_STATUS_5 0x20 +#define CR1_STATUS_6 0x40 +#define CR1_STOP_REG_UPDATE (1 << 7) + +/* Receive frame status bits */ + +#define RX_RCLD (1 << 0) +#define RX_IA_MATCH (1 << 1) +#define RX_NO_AD_MATCH (1 << 2) +#define RX_NO_SFD (1 << 3) +#define RX_SRT_FRM (1 << 7) +#define RX_OVRRUN (1 << 8) +#define RX_ALG_ERR (1 << 10) +#define RX_CRC_ERR (1 << 11) +#define RX_LEN_ERR (1 << 12) +#define RX_RCV_OK (1 << 13) +#define RX_TYP_LEN (1 << 15) + +/* Transmit status bits */ + +#define TX_NCOL_MASK 0x0f +#define TX_FRTL (1 << 4) +#define TX_MAX_COL (1 << 5) +#define TX_HRT_BEAT (1 << 6) +#define TX_DEFER (1 << 7) +#define TX_UND_RUN (1 << 8) +#define TX_LOST_CTS (1 << 9) +#define TX_LOST_CRS (1 << 10) +#define TX_LTCOL (1 << 11) +#define TX_OK (1 << 13) +#define TX_COLL (1 << 15) + +struct i82593_conf_block { + u_char fifo_limit : 4, + forgnesi : 1, + fifo_32 : 1, + d6mod : 1, + throttle_enb : 1; + u_char throttle : 6, + cntrxint : 1, + contin : 1; + u_char addr_len : 3, + acloc : 1, + preamb_len : 2, + loopback : 2; + u_char lin_prio : 3, + tbofstop : 1, + exp_prio : 3, + bof_met : 1; + u_char : 4, + ifrm_spc : 4; + u_char : 5, + slottim_low : 3; + u_char slottim_hi : 3, + : 1, + max_retr : 4; + u_char prmisc : 1, + bc_dis : 1, + : 1, + crs_1 : 1, + nocrc_ins : 1, + crc_1632 : 1, + : 1, + crs_cdt : 1; + u_char cs_filter : 3, + crs_src : 1, + cd_filter : 3, + : 1; + u_char : 2, + min_fr_len : 6; + u_char lng_typ : 1, + lng_fld : 1, + rxcrc_xf : 1, + artx : 1, + sarec : 1, + tx_jabber : 1, /* why is this called max_len in the manual? */ + hash_1 : 1, + lbpkpol : 1; + u_char : 6, + fdx : 1, + : 1; + u_char dummy_6 : 6, /* supposed to be ones */ + mult_ia : 1, + dis_bof : 1; + u_char dummy_1 : 1, /* supposed to be one */ + tx_ifs_retrig : 2, + mc_all : 1, + rcv_mon : 2, + frag_acpt : 1, + tstrttrs : 1; + u_char fretx : 1, + runt_eop : 1, + hw_sw_pin : 1, + big_endn : 1, + syncrqs : 1, + sttlen : 1, + tx_eop : 1, + rx_eop : 1; + u_char rbuf_size : 5, + rcvstop : 1, + : 2; +}; + +#define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ + +#endif /* _I82593_H */ diff --git a/drivers/net/wireless/ieee802_11.h b/drivers/net/wireless/ieee802_11.h new file mode 100644 index 00000000000..53dd5248f9f --- /dev/null +++ b/drivers/net/wireless/ieee802_11.h @@ -0,0 +1,78 @@ +#ifndef _IEEE802_11_H +#define _IEEE802_11_H + +#define IEEE802_11_DATA_LEN 2304 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + The figure in section 7.1.2 suggests a body size of up to 2312 + bytes is allowed, which is a bit confusing, I suspect this + represents the 2304 bytes of real data, plus a possible 8 bytes of + WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + + +#define IEEE802_11_HLEN 30 +#define IEEE802_11_FRAME_LEN (IEEE802_11_DATA_LEN + IEEE802_11_HLEN) + +struct ieee802_11_hdr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; +} __attribute__ ((packed)); + +/* Frame control field constants */ +#define IEEE802_11_FCTL_VERS 0x0002 +#define IEEE802_11_FCTL_FTYPE 0x000c +#define IEEE802_11_FCTL_STYPE 0x00f0 +#define IEEE802_11_FCTL_TODS 0x0100 +#define IEEE802_11_FCTL_FROMDS 0x0200 +#define IEEE802_11_FCTL_MOREFRAGS 0x0400 +#define IEEE802_11_FCTL_RETRY 0x0800 +#define IEEE802_11_FCTL_PM 0x1000 +#define IEEE802_11_FCTL_MOREDATA 0x2000 +#define IEEE802_11_FCTL_WEP 0x4000 +#define IEEE802_11_FCTL_ORDER 0x8000 + +#define IEEE802_11_FTYPE_MGMT 0x0000 +#define IEEE802_11_FTYPE_CTL 0x0004 +#define IEEE802_11_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE802_11_STYPE_ASSOC_REQ 0x0000 +#define IEEE802_11_STYPE_ASSOC_RESP 0x0010 +#define IEEE802_11_STYPE_REASSOC_REQ 0x0020 +#define IEEE802_11_STYPE_REASSOC_RESP 0x0030 +#define IEEE802_11_STYPE_PROBE_REQ 0x0040 +#define IEEE802_11_STYPE_PROBE_RESP 0x0050 +#define IEEE802_11_STYPE_BEACON 0x0080 +#define IEEE802_11_STYPE_ATIM 0x0090 +#define IEEE802_11_STYPE_DISASSOC 0x00A0 +#define IEEE802_11_STYPE_AUTH 0x00B0 +#define IEEE802_11_STYPE_DEAUTH 0x00C0 + +/* control */ +#define IEEE802_11_STYPE_PSPOLL 0x00A0 +#define IEEE802_11_STYPE_RTS 0x00B0 +#define IEEE802_11_STYPE_CTS 0x00C0 +#define IEEE802_11_STYPE_ACK 0x00D0 +#define IEEE802_11_STYPE_CFEND 0x00E0 +#define IEEE802_11_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE802_11_STYPE_DATA 0x0000 +#define IEEE802_11_STYPE_DATA_CFACK 0x0010 +#define IEEE802_11_STYPE_DATA_CFPOLL 0x0020 +#define IEEE802_11_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE802_11_STYPE_NULLFUNC 0x0040 +#define IEEE802_11_STYPE_CFACK 0x0050 +#define IEEE802_11_STYPE_CFPOLL 0x0060 +#define IEEE802_11_STYPE_CFACKPOLL 0x0070 + +#define IEEE802_11_SCTL_FRAG 0x000F +#define IEEE802_11_SCTL_SEQ 0xFFF0 + +#endif /* _IEEE802_11_H */ diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c new file mode 100644 index 00000000000..382241e7edb --- /dev/null +++ b/drivers/net/wireless/netwave_cs.c @@ -0,0 +1,1736 @@ +/********************************************************************* + * + * Filename: netwave_cs.c + * Version: 0.4.1 + * Description: Netwave AirSurfer Wireless LAN PC Card driver + * Status: Experimental. + * Authors: John Markus Bjørndalen <johnm@cs.uit.no> + * Dag Brattli <dagb@cs.uit.no> + * David Hinds <dahinds@users.sourceforge.net> + * Created at: A long time ago! + * Modified at: Mon Nov 10 11:54:37 1997 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1997 University of Tromsø, Norway + * + * Revision History: + * + * 08-Nov-97 15:14:47 John Markus Bjørndalen <johnm@cs.uit.no> + * - Fixed some bugs in netwave_rx and cleaned it up a bit. + * (One of the bugs would have destroyed packets when receiving + * multiple packets per interrupt). + * - Cleaned up parts of newave_hw_xmit. + * - A few general cleanups. + * 24-Oct-97 13:17:36 Dag Brattli <dagb@cs.uit.no> + * - Fixed netwave_rx receive function (got updated docs) + * Others: + * - Changed name from xircnw to netwave, take a look at + * http://www.netwave-wireless.com + * - Some reorganizing of the code + * - Removed possible race condition between interrupt handler and transmit + * function + * - Started to add wireless extensions, but still needs some coding + * - Added watchdog for better handling of transmission timeouts + * (hopefully this works better) + ********************************************************************/ + +/* To have statistics (just packets sent) define this */ +#undef NETWAVE_STATS + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/bitops.h> +#ifdef CONFIG_NET_RADIO +#include <linux/wireless.h> +#if WIRELESS_EXT > 12 +#include <net/iw_handler.h> +#endif /* WIRELESS_EXT > 12 */ +#endif + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> +#include <pcmcia/mem_op.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/dma.h> + +#define NETWAVE_REGOFF 0x8000 +/* The Netwave IO registers, offsets to iobase */ +#define NETWAVE_REG_COR 0x0 +#define NETWAVE_REG_CCSR 0x2 +#define NETWAVE_REG_ASR 0x4 +#define NETWAVE_REG_IMR 0xa +#define NETWAVE_REG_PMR 0xc +#define NETWAVE_REG_IOLOW 0x6 +#define NETWAVE_REG_IOHI 0x7 +#define NETWAVE_REG_IOCONTROL 0x8 +#define NETWAVE_REG_DATA 0xf +/* The Netwave Extended IO registers, offsets to RamBase */ +#define NETWAVE_EREG_ASCC 0x114 +#define NETWAVE_EREG_RSER 0x120 +#define NETWAVE_EREG_RSERW 0x124 +#define NETWAVE_EREG_TSER 0x130 +#define NETWAVE_EREG_TSERW 0x134 +#define NETWAVE_EREG_CB 0x100 +#define NETWAVE_EREG_SPCQ 0x154 +#define NETWAVE_EREG_SPU 0x155 +#define NETWAVE_EREG_LIF 0x14e +#define NETWAVE_EREG_ISPLQ 0x156 +#define NETWAVE_EREG_HHC 0x158 +#define NETWAVE_EREG_NI 0x16e +#define NETWAVE_EREG_MHS 0x16b +#define NETWAVE_EREG_TDP 0x140 +#define NETWAVE_EREG_RDP 0x150 +#define NETWAVE_EREG_PA 0x160 +#define NETWAVE_EREG_EC 0x180 +#define NETWAVE_EREG_CRBP 0x17a +#define NETWAVE_EREG_ARW 0x166 + +/* + * Commands used in the extended command buffer + * NETWAVE_EREG_CB (0x100-0x10F) + */ +#define NETWAVE_CMD_NOP 0x00 +#define NETWAVE_CMD_SRC 0x01 +#define NETWAVE_CMD_STC 0x02 +#define NETWAVE_CMD_AMA 0x03 +#define NETWAVE_CMD_DMA 0x04 +#define NETWAVE_CMD_SAMA 0x05 +#define NETWAVE_CMD_ER 0x06 +#define NETWAVE_CMD_DR 0x07 +#define NETWAVE_CMD_TL 0x08 +#define NETWAVE_CMD_SRP 0x09 +#define NETWAVE_CMD_SSK 0x0a +#define NETWAVE_CMD_SMD 0x0b +#define NETWAVE_CMD_SAPD 0x0c +#define NETWAVE_CMD_SSS 0x11 +/* End of Command marker */ +#define NETWAVE_CMD_EOC 0x00 + +/* ASR register bits */ +#define NETWAVE_ASR_RXRDY 0x80 +#define NETWAVE_ASR_TXBA 0x01 + +#define TX_TIMEOUT ((32*HZ)/100) + +static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */ +static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */ + +static const unsigned int corConfIENA = 0x01; /* Interrupt enable */ +static const unsigned int corConfLVLREQ = 0x40; /* Keep high */ + +static const unsigned int rxConfRxEna = 0x80; /* Receive Enable */ +static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/ +static const unsigned int rxConfPro = 0x10; /* Promiscuous */ +static const unsigned int rxConfAMP = 0x08; /* Accept Multicast Packets */ +static const unsigned int rxConfBcast = 0x04; /* Accept Broadcast Packets */ + +static const unsigned int txConfTxEna = 0x80; /* Transmit Enable */ +static const unsigned int txConfMAC = 0x20; /* Host sends MAC mode */ +static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */ +static const unsigned int txConfKey = 0x02; /* Scramble data packets */ +static const unsigned int txConfLoop = 0x01; /* Loopback mode */ + +/* + All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If + you do not define PCMCIA_DEBUG at all, all the debug code will be + left out. If you compile with PCMCIA_DEBUG=0, the debug code will + be present but disabled -- but it can then be enabled for specific + modules at load time with a 'pc_debug=#' option to insmod. +*/ + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) +static char *version = +"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n"; +#else +#define DEBUG(n, args...) +#endif + +static dev_info_t dev_info = "netwave_cs"; + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Choose the domain, default is 0x100 */ +static u_int domain = 0x100; + +/* Scramble key, range from 0x0 to 0xffff. + * 0x0 is no scrambling. + */ +static u_int scramble_key = 0x0; + +/* Shared memory speed, in ns. The documentation states that + * the card should not be read faster than every 400ns. + * This timing should be provided by the HBA. If it becomes a + * problem, try setting mem_speed to 400. + */ +static int mem_speed; + +module_param(domain, int, 0); +module_param(scramble_key, int, 0); +module_param(mem_speed, int, 0); + +/*====================================================================*/ + +/* PCMCIA (Card Services) related functions */ +static void netwave_release(dev_link_t *link); /* Card removal */ +static int netwave_event(event_t event, int priority, + event_callback_args_t *args); +static void netwave_pcmcia_config(dev_link_t *arg); /* Runs after card + insertion */ +static dev_link_t *netwave_attach(void); /* Create instance */ +static void netwave_detach(dev_link_t *); /* Destroy instance */ + +/* Hardware configuration */ +static void netwave_doreset(kio_addr_t iobase, u_char __iomem *ramBase); +static void netwave_reset(struct net_device *dev); + +/* Misc device stuff */ +static int netwave_open(struct net_device *dev); /* Open the device */ +static int netwave_close(struct net_device *dev); /* Close the device */ + +/* Packet transmission and Packet reception */ +static int netwave_start_xmit( struct sk_buff *skb, struct net_device *dev); +static int netwave_rx( struct net_device *dev); + +/* Interrupt routines */ +static irqreturn_t netwave_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static void netwave_watchdog(struct net_device *); + +/* Statistics */ +static void update_stats(struct net_device *dev); +static struct net_device_stats *netwave_get_stats(struct net_device *dev); + +/* Wireless extensions */ +#ifdef WIRELESS_EXT +static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev); +#endif +static int netwave_ioctl(struct net_device *, struct ifreq *, int); + +static void set_multicast_list(struct net_device *dev); + +/* + A linked list of "instances" of the skeleton device. Each actual + PCMCIA card corresponds to one device instance, and is described + by one dev_link_t structure (defined in ds.h). + + You may not want to use a linked list for this -- for example, the + memory card driver uses an array of dev_link_t pointers, where minor + device numbers are used to derive the corresponding array index. +*/ +static dev_link_t *dev_list; + +/* + A dev_link_t structure has fields for most things that are needed + to keep track of a socket, but there will usually be some device + specific information that also needs to be kept track of. The + 'priv' pointer in a dev_link_t structure can be used to point to + a device-specific private data structure, like this. + + A driver needs to provide a dev_node_t structure for each device + on a card. In some cases, there is only one device per card (for + example, ethernet cards, modems). In other cases, there may be + many actual or logical devices (SCSI adapters, memory cards with + multiple partitions). The dev_node_t structures need to be kept + in a linked list starting at the 'dev' field of a dev_link_t + structure. We allocate them in the card's private data structure, + because they generally can't be allocated dynamically. +*/ + +#if WIRELESS_EXT <= 12 +/* Wireless extensions backward compatibility */ + +/* Part of iw_handler prototype we need */ +struct iw_request_info +{ + __u16 cmd; /* Wireless Extension command */ + __u16 flags; /* More to come ;-) */ +}; + +/* Wireless Extension Backward compatibility - Jean II + * If the new wireless device private ioctl range is not defined, + * default to standard device private ioctl range */ +#ifndef SIOCIWFIRSTPRIV +#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE +#endif /* SIOCIWFIRSTPRIV */ + +#else /* WIRELESS_EXT <= 12 */ +static const struct iw_handler_def netwave_handler_def; +#endif /* WIRELESS_EXT <= 12 */ + +#define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */ + +#define MAX_ESA 10 + +typedef struct net_addr { + u_char addr48[6]; +} net_addr; + +struct site_survey { + u_short length; + u_char struct_revision; + u_char roaming_state; + + u_char sp_existsFlag; + u_char sp_link_quality; + u_char sp_max_link_quality; + u_char linkQualityGoodFairBoundary; + u_char linkQualityFairPoorBoundary; + u_char sp_utilization; + u_char sp_goodness; + u_char sp_hotheadcount; + u_char roaming_condition; + + net_addr sp; + u_char numAPs; + net_addr nearByAccessPoints[MAX_ESA]; +}; + +typedef struct netwave_private { + dev_link_t link; + spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ + dev_node_t node; + u_char __iomem *ramBase; + int timeoutCounter; + int lastExec; + struct timer_list watchdog; /* To avoid blocking state */ + struct site_survey nss; + struct net_device_stats stats; +#ifdef WIRELESS_EXT + struct iw_statistics iw_stats; /* Wireless stats */ +#endif +} netwave_private; + +#ifdef NETWAVE_STATS +static struct net_device_stats *netwave_get_stats(struct net_device *dev); +#endif + +/* + * The Netwave card is little-endian, so won't work for big endian + * systems. + */ +static inline unsigned short get_uint16(u_char __iomem *staddr) +{ + return readw(staddr); /* Return only 16 bits */ +} + +static inline short get_int16(u_char __iomem * staddr) +{ + return readw(staddr); +} + +/* + * Wait until the WOC (Write Operation Complete) bit in the + * ASR (Adapter Status Register) is asserted. + * This should have aborted if it takes too long time. + */ +static inline void wait_WOC(unsigned int iobase) +{ + /* Spin lock */ + while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; +} + +#ifdef WIRELESS_EXT +static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, + kio_addr_t iobase) { + u_short resultBuffer; + + /* if time since last snapshot is > 1 sec. (100 jiffies?) then take + * new snapshot, else return cached data. This is the recommended rate. + */ + if ( jiffies - priv->lastExec > 100) { + /* Take site survey snapshot */ + /*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies - + priv->lastExec); */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); + wait_WOC(iobase); + + /* Get result and copy to cach */ + resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP); + copy_from_pc( &priv->nss, ramBase+resultBuffer, + sizeof(struct site_survey)); + } +} +#endif + +#ifdef WIRELESS_EXT +/* + * Function netwave_get_wireless_stats (dev) + * + * Wireless extensions statistics + * + */ +static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev) +{ + unsigned long flags; + kio_addr_t iobase = dev->base_addr; + netwave_private *priv = netdev_priv(dev); + u_char __iomem *ramBase = priv->ramBase; + struct iw_statistics* wstats; + + wstats = &priv->iw_stats; + + spin_lock_irqsave(&priv->spinlock, flags); + + netwave_snapshot( priv, ramBase, iobase); + + wstats->status = priv->nss.roaming_state; + wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ); + wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ); + wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f; + wstats->discard.nwid = 0L; + wstats->discard.code = 0L; + wstats->discard.misc = 0L; + + spin_unlock_irqrestore(&priv->spinlock, flags); + + return &priv->iw_stats; +} +#endif + +/* + * Function netwave_attach (void) + * + * Creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card + * Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a + * card insertion event. + */ +static dev_link_t *netwave_attach(void) +{ + client_reg_t client_reg; + dev_link_t *link; + struct net_device *dev; + netwave_private *priv; + int ret; + + DEBUG(0, "netwave_attach()\n"); + + /* Initialize the dev_link_t structure */ + dev = alloc_etherdev(sizeof(netwave_private)); + if (!dev) + return NULL; + priv = netdev_priv(dev); + link = &priv->link; + link->priv = dev; + + /* The io structure describes IO port mapping */ + link->io.NumPorts1 = 16; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + /* link->io.NumPorts2 = 16; + link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */ + link->io.IOAddrLines = 5; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = &netwave_interrupt; + + /* General socket configuration */ + link->conf.Attributes = CONF_ENABLE_IRQ; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + link->conf.ConfigIndex = 1; + link->conf.Present = PRESENT_OPTION; + + /* Netwave private struct init. link/dev/node already taken care of, + * other stuff zero'd - Jean II */ + spin_lock_init(&priv->spinlock); + + /* Netwave specific entries in the device structure */ + SET_MODULE_OWNER(dev); + dev->hard_start_xmit = &netwave_start_xmit; + dev->get_stats = &netwave_get_stats; + dev->set_multicast_list = &set_multicast_list; + /* wireless extensions */ +#ifdef WIRELESS_EXT + dev->get_wireless_stats = &netwave_get_wireless_stats; +#if WIRELESS_EXT > 12 + dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def; +#endif /* WIRELESS_EXT > 12 */ +#endif /* WIRELESS_EXT */ + dev->do_ioctl = &netwave_ioctl; + + dev->tx_timeout = &netwave_watchdog; + dev->watchdog_timeo = TX_TIMEOUT; + + dev->open = &netwave_open; + dev->stop = &netwave_close; + link->irq.Instance = dev; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &netwave_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != 0) { + cs_error(link->handle, RegisterClient, ret); + netwave_detach(link); + return NULL; + } + + return link; +} /* netwave_attach */ + +/* + * Function netwave_detach (link) + * + * This deletes a driver "instance". The device is de-registered + * with Card Services. If it has been released, all local data + * structures are freed. Otherwise, the structures will be freed + * when the device is released. + */ +static void netwave_detach(dev_link_t *link) +{ + struct net_device *dev = link->priv; + dev_link_t **linkp; + + DEBUG(0, "netwave_detach(0x%p)\n", link); + + /* + If the device is currently configured and active, we won't + actually delete it yet. Instead, it is marked so that when + the release() function is called, that will trigger a proper + detach(). + */ + if (link->state & DEV_CONFIG) + netwave_release(link); + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) break; + if (*linkp == NULL) + { + DEBUG(1, "netwave_cs: detach fail, '%s' not in list\n", + link->dev->dev_name); + return; + } + + /* Unlink device structure, free pieces */ + *linkp = link->next; + if (link->dev) + unregister_netdev(dev); + free_netdev(dev); + +} /* netwave_detach */ + +/* + * Wireless Handler : get protocol name + */ +static int netwave_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + strcpy(wrqu->name, "Netwave"); + return 0; +} + +/* + * Wireless Handler : set Network ID + */ +static int netwave_set_nwid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long flags; + kio_addr_t iobase = dev->base_addr; + netwave_private *priv = netdev_priv(dev); + u_char __iomem *ramBase = priv->ramBase; + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&priv->spinlock, flags); + +#if WIRELESS_EXT > 8 + if(!wrqu->nwid.disabled) { + domain = wrqu->nwid.value; +#else /* WIRELESS_EXT > 8 */ + if(wrqu->nwid.on) { + domain = wrqu->nwid.nwid; +#endif /* WIRELESS_EXT > 8 */ + printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", + (domain >> 8) & 0x01, domain & 0xff); + wait_WOC(iobase); + writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0); + writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1); + writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); + } + + /* ReEnable interrupts & restore flags */ + spin_unlock_irqrestore(&priv->spinlock, flags); + + return 0; +} + +/* + * Wireless Handler : get Network ID + */ +static int netwave_get_nwid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ +#if WIRELESS_EXT > 8 + wrqu->nwid.value = domain; + wrqu->nwid.disabled = 0; + wrqu->nwid.fixed = 1; +#else /* WIRELESS_EXT > 8 */ + wrqu->nwid.nwid = domain; + wrqu->nwid.on = 1; +#endif /* WIRELESS_EXT > 8 */ + + return 0; +} + +/* + * Wireless Handler : set scramble key + */ +static int netwave_set_scramble(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *key) +{ + unsigned long flags; + kio_addr_t iobase = dev->base_addr; + netwave_private *priv = netdev_priv(dev); + u_char __iomem *ramBase = priv->ramBase; + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&priv->spinlock, flags); + + scramble_key = (key[0] << 8) | key[1]; + wait_WOC(iobase); + writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0); + writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1); + writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); + + /* ReEnable interrupts & restore flags */ + spin_unlock_irqrestore(&priv->spinlock, flags); + + return 0; +} + +/* + * Wireless Handler : get scramble key + */ +static int netwave_get_scramble(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *key) +{ + key[1] = scramble_key & 0xff; + key[0] = (scramble_key>>8) & 0xff; +#if WIRELESS_EXT > 8 + wrqu->encoding.flags = IW_ENCODE_ENABLED; + wrqu->encoding.length = 2; +#else /* WIRELESS_EXT > 8 */ + wrqu->encoding.method = 1; +#endif /* WIRELESS_EXT > 8 */ + + return 0; +} + +#if WIRELESS_EXT > 8 +/* + * Wireless Handler : get mode + */ +static int netwave_get_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + if(domain & 0x100) + wrqu->mode = IW_MODE_INFRA; + else + wrqu->mode = IW_MODE_ADHOC; + + return 0; +} +#endif /* WIRELESS_EXT > 8 */ + +/* + * Wireless Handler : get range info + */ +static int netwave_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct iw_range *range = (struct iw_range *) extra; + int ret = 0; + + /* Set the length (very important for backward compatibility) */ + wrqu->data.length = sizeof(struct iw_range); + + /* Set all the info we don't care or don't know about to zero */ + memset(range, 0, sizeof(struct iw_range)); + +#if WIRELESS_EXT > 10 + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 9; /* Nothing for us in v10 and v11 */ +#endif /* WIRELESS_EXT > 10 */ + + /* Set information in the range struct */ + range->throughput = 450 * 1000; /* don't argue on this ! */ + range->min_nwid = 0x0000; + range->max_nwid = 0x01FF; + + range->num_channels = range->num_frequency = 0; + + range->sensitivity = 0x3F; + range->max_qual.qual = 255; + range->max_qual.level = 255; + range->max_qual.noise = 0; + +#if WIRELESS_EXT > 7 + range->num_bitrates = 1; + range->bitrate[0] = 1000000; /* 1 Mb/s */ +#endif /* WIRELESS_EXT > 7 */ + +#if WIRELESS_EXT > 8 + range->encoding_size[0] = 2; /* 16 bits scrambling */ + range->num_encoding_sizes = 1; + range->max_encoding_tokens = 1; /* Only one key possible */ +#endif /* WIRELESS_EXT > 8 */ + + return ret; +} + +/* + * Wireless Private Handler : get snapshot + */ +static int netwave_get_snap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long flags; + kio_addr_t iobase = dev->base_addr; + netwave_private *priv = netdev_priv(dev); + u_char __iomem *ramBase = priv->ramBase; + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&priv->spinlock, flags); + + /* Take snapshot of environment */ + netwave_snapshot( priv, ramBase, iobase); + wrqu->data.length = priv->nss.length; + memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey)); + + priv->lastExec = jiffies; + + /* ReEnable interrupts & restore flags */ + spin_unlock_irqrestore(&priv->spinlock, flags); + + return(0); +} + +/* + * Structures to export the Wireless Handlers + * This is the stuff that are treated the wireless extensions (iwconfig) + */ + +static const struct iw_priv_args netwave_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + { SIOCGIPSNAP, 0, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey), + "getsitesurvey" }, +}; + +#if WIRELESS_EXT > 12 + +static const iw_handler netwave_handler[] = +{ + NULL, /* SIOCSIWNAME */ + netwave_get_name, /* SIOCGIWNAME */ + netwave_set_nwid, /* SIOCSIWNWID */ + netwave_get_nwid, /* SIOCGIWNWID */ + NULL, /* SIOCSIWFREQ */ + NULL, /* SIOCGIWFREQ */ + NULL, /* SIOCSIWMODE */ + netwave_get_mode, /* SIOCGIWMODE */ + NULL, /* SIOCSIWSENS */ + NULL, /* SIOCGIWSENS */ + NULL, /* SIOCSIWRANGE */ + netwave_get_range, /* SIOCGIWRANGE */ + NULL, /* SIOCSIWPRIV */ + NULL, /* SIOCGIWPRIV */ + NULL, /* SIOCSIWSTATS */ + NULL, /* SIOCGIWSTATS */ + NULL, /* SIOCSIWSPY */ + NULL, /* SIOCGIWSPY */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWAP */ + NULL, /* SIOCGIWAP */ + NULL, /* -- hole -- */ + NULL, /* SIOCGIWAPLIST */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWESSID */ + NULL, /* SIOCGIWESSID */ + NULL, /* SIOCSIWNICKN */ + NULL, /* SIOCGIWNICKN */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWRATE */ + NULL, /* SIOCGIWRATE */ + NULL, /* SIOCSIWRTS */ + NULL, /* SIOCGIWRTS */ + NULL, /* SIOCSIWFRAG */ + NULL, /* SIOCGIWFRAG */ + NULL, /* SIOCSIWTXPOW */ + NULL, /* SIOCGIWTXPOW */ + NULL, /* SIOCSIWRETRY */ + NULL, /* SIOCGIWRETRY */ + netwave_set_scramble, /* SIOCSIWENCODE */ + netwave_get_scramble, /* SIOCGIWENCODE */ +}; + +static const iw_handler netwave_private_handler[] = +{ + NULL, /* SIOCIWFIRSTPRIV */ + netwave_get_snap, /* SIOCIWFIRSTPRIV + 1 */ +}; + +static const struct iw_handler_def netwave_handler_def = +{ + .num_standard = sizeof(netwave_handler)/sizeof(iw_handler), + .num_private = sizeof(netwave_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(netwave_private_args)/sizeof(struct iw_priv_args), + .standard = (iw_handler *) netwave_handler, + .private = (iw_handler *) netwave_private_handler, + .private_args = (struct iw_priv_args *) netwave_private_args, +}; +#endif /* WIRELESS_EXT > 12 */ + +/* + * Function netwave_ioctl (dev, rq, cmd) + * + * Perform ioctl : config & info stuff + * This is the stuff that are treated the wireless extensions (iwconfig) + * + */ +static int netwave_ioctl(struct net_device *dev, /* ioctl device */ + struct ifreq *rq, /* Data passed */ + int cmd) /* Ioctl number */ +{ + int ret = 0; +#ifdef WIRELESS_EXT +#if WIRELESS_EXT <= 12 + struct iwreq *wrq = (struct iwreq *) rq; +#endif +#endif + + DEBUG(0, "%s: ->netwave_ioctl(cmd=0x%X)\n", dev->name, cmd); + + /* Look what is the request */ + switch(cmd) { + /* --------------- WIRELESS EXTENSIONS --------------- */ +#ifdef WIRELESS_EXT +#if WIRELESS_EXT <= 12 + case SIOCGIWNAME: + netwave_get_name(dev, NULL, &(wrq->u), NULL); + break; + case SIOCSIWNWID: + ret = netwave_set_nwid(dev, NULL, &(wrq->u), NULL); + break; + case SIOCGIWNWID: + ret = netwave_get_nwid(dev, NULL, &(wrq->u), NULL); + break; +#if WIRELESS_EXT > 8 /* Note : The API did change... */ + case SIOCGIWENCODE: + /* Get scramble key */ + if(wrq->u.encoding.pointer != (caddr_t) 0) + { + char key[2]; + ret = netwave_get_scramble(dev, NULL, &(wrq->u), key); + if(copy_to_user(wrq->u.encoding.pointer, key, 2)) + ret = -EFAULT; + } + break; + case SIOCSIWENCODE: + /* Set scramble key */ + if(wrq->u.encoding.pointer != (caddr_t) 0) + { + char key[2]; + if(copy_from_user(key, wrq->u.encoding.pointer, 2)) + { + ret = -EFAULT; + break; + } + ret = netwave_set_scramble(dev, NULL, &(wrq->u), key); + } + break; + case SIOCGIWMODE: + /* Mode of operation */ + ret = netwave_get_mode(dev, NULL, &(wrq->u), NULL); + break; +#else /* WIRELESS_EXT > 8 */ + case SIOCGIWENCODE: + /* Get scramble key */ + ret = netwave_get_scramble(dev, NULL, &(wrq->u), + (char *) &wrq->u.encoding.code); + break; + case SIOCSIWENCODE: + /* Set scramble key */ + ret = netwave_set_scramble(dev, NULL, &(wrq->u), + (char *) &wrq->u.encoding.code); + break; +#endif /* WIRELESS_EXT > 8 */ + case SIOCGIWRANGE: + /* Basic checking... */ + if(wrq->u.data.pointer != (caddr_t) 0) { + struct iw_range range; + ret = netwave_get_range(dev, NULL, &(wrq->u), (char *) &range); + if (copy_to_user(wrq->u.data.pointer, &range, + sizeof(struct iw_range))) + ret = -EFAULT; + } + break; + case SIOCGIWPRIV: + /* Basic checking... */ + if(wrq->u.data.pointer != (caddr_t) 0) { + /* Set the number of ioctl available */ + wrq->u.data.length = sizeof(netwave_private_args) / sizeof(netwave_private_args[0]); + + /* Copy structure to the user buffer */ + if(copy_to_user(wrq->u.data.pointer, + (u_char *) netwave_private_args, + sizeof(netwave_private_args))) + ret = -EFAULT; + } + break; + case SIOCGIPSNAP: + if(wrq->u.data.pointer != (caddr_t) 0) { + char buffer[sizeof( struct site_survey)]; + ret = netwave_get_snap(dev, NULL, &(wrq->u), buffer); + /* Copy structure to the user buffer */ + if(copy_to_user(wrq->u.data.pointer, + buffer, + sizeof( struct site_survey))) + { + printk(KERN_DEBUG "Bad buffer!\n"); + break; + } + } + break; +#endif /* WIRELESS_EXT <= 12 */ +#endif /* WIRELESS_EXT */ + default: + ret = -EOPNOTSUPP; + } + + return ret; +} + +/* + * Function netwave_pcmcia_config (link) + * + * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION + * event is received, to configure the PCMCIA socket, and to make the + * device available to the system. + * + */ + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +static void netwave_pcmcia_config(dev_link_t *link) { + client_handle_t handle = link->handle; + struct net_device *dev = link->priv; + netwave_private *priv = netdev_priv(dev); + tuple_t tuple; + cisparse_t parse; + int i, j, last_ret, last_fn; + u_char buf[64]; + win_req_t req; + memreq_t mem; + u_char __iomem *ramBase = NULL; + + DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link); + + /* + This reads the card's CONFIG tuple to find its configuration + registers. + */ + tuple.Attributes = 0; + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleDataMax = 64; + tuple.TupleOffset = 0; + tuple.DesiredTuple = CISTPL_CONFIG; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* + * Try allocating IO ports. This tries a few fixed addresses. + * If you want, you can also read the card's config table to + * pick addresses -- see the serial driver for an example. + */ + for (i = j = 0x0; j < 0x400; j += 0x20) { + link->io.BasePort1 = j ^ 0x300; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) break; + } + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestIO, i); + goto failed; + } + + /* + * Now allocate an interrupt line. Note that this does not + * actually assign a handler to the interrupt. + */ + CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq)); + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping. + */ + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf)); + + /* + * Allocate a 32K memory window. Note that the dev_link_t + * structure provides space for one window handle -- if your + * device needs several windows, you'll need to keep track of + * the handles in your private data structure, dev->priv. + */ + DEBUG(1, "Setting mem speed of %d\n", mem_speed); + + req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + req.Base = 0; req.Size = 0x8000; + req.AccessSpeed = mem_speed; + CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &link->win)); + mem.CardOffset = 0x20000; mem.Page = 0; + CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); + + /* Store base address of the common window frame */ + ramBase = ioremap(req.Base, 0x8000); + priv->ramBase = ramBase; + + dev->irq = link->irq.AssignedIRQ; + dev->base_addr = link->io.BasePort1; + SET_NETDEV_DEV(dev, &handle_to_dev(handle)); + + if (register_netdev(dev) != 0) { + printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n"); + goto failed; + } + + strcpy(priv->node.dev_name, dev->name); + link->dev = &priv->node; + link->state &= ~DEV_CONFIG_PENDING; + + /* Reset card before reading physical address */ + netwave_doreset(dev->base_addr, ramBase); + + /* Read the ethernet address and fill in the Netwave registers. */ + for (i = 0; i < 6; i++) + dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i); + + printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx id " + "%c%c, hw_addr ", dev->name, dev->base_addr, dev->irq, + (u_long) ramBase, (int) readb(ramBase+NETWAVE_EREG_NI), + (int) readb(ramBase+NETWAVE_EREG_NI+1)); + for (i = 0; i < 6; i++) + printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n")); + + /* get revision words */ + printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n", + get_uint16(ramBase + NETWAVE_EREG_ARW), + get_uint16(ramBase + NETWAVE_EREG_ARW+2)); + return; + +cs_failed: + cs_error(link->handle, last_fn, last_ret); +failed: + netwave_release(link); +} /* netwave_pcmcia_config */ + +/* + * Function netwave_release (arg) + * + * After a card is removed, netwave_release() will unregister the net + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void netwave_release(dev_link_t *link) +{ + struct net_device *dev = link->priv; + netwave_private *priv = netdev_priv(dev); + + DEBUG(0, "netwave_release(0x%p)\n", link); + + /* Don't bother checking to see if these succeed or not */ + if (link->win) { + iounmap(priv->ramBase); + pcmcia_release_window(link->win); + } + pcmcia_release_configuration(link->handle); + pcmcia_release_io(link->handle, &link->io); + pcmcia_release_irq(link->handle, &link->irq); + + link->state &= ~DEV_CONFIG; +} + +/* + * Function netwave_event (event, priority, args) + * + * The card status event handler. Mostly, this schedules other + * stuff to run after an event is received. A CARD_REMOVAL event + * also sets some flags to discourage the net drivers from trying + * to talk to the card any more. + * + * When a CARD_REMOVAL event is received, we immediately set a flag + * to block future accesses to this device. All the functions that + * actually access the device should check this flag to make sure + * the card is still present. + * + */ +static int netwave_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + struct net_device *dev = link->priv; + + DEBUG(1, "netwave_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_REGISTRATION_COMPLETE: + DEBUG(0, "netwave_cs: registration complete\n"); + break; + + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + netif_device_detach(dev); + netwave_release(link); + } + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + netwave_pcmcia_config( link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) { + if (link->open) + netif_device_detach(dev); + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, &link->conf); + if (link->open) { + netwave_reset(dev); + netif_device_attach(dev); + } + } + break; + } + return 0; +} /* netwave_event */ + +/* + * Function netwave_doreset (ioBase, ramBase) + * + * Proper hardware reset of the card. + */ +static void netwave_doreset(kio_addr_t ioBase, u_char __iomem *ramBase) +{ + /* Reset card */ + wait_WOC(ioBase); + outb(0x80, ioBase + NETWAVE_REG_PMR); + writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */ + outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */ +} + +/* + * Function netwave_reset (dev) + * + * Reset and restore all of the netwave registers + */ +static void netwave_reset(struct net_device *dev) { + /* u_char state; */ + netwave_private *priv = netdev_priv(dev); + u_char __iomem *ramBase = priv->ramBase; + kio_addr_t iobase = dev->base_addr; + + DEBUG(0, "netwave_reset: Done with hardware reset\n"); + + priv->timeoutCounter = 0; + + /* Reset card */ + netwave_doreset(iobase, ramBase); + printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n"); + + /* Write a NOP to check the card */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); + + /* Set receive conf */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0); + writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); + + /* Set transmit conf */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0); + writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); + + /* Now set the MU Domain */ + printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff); + wait_WOC(iobase); + writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0); + writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1); + writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); + + /* Set scramble key */ + printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key); + wait_WOC(iobase); + writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0); + writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1); + writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); + + /* Enable interrupts, bit 4 high to keep unused + * source from interrupting us, bit 2 high to + * set interrupt enable, 567 to enable TxDN, + * RxErr and RxRdy + */ + wait_WOC(iobase); + outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR); + + /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36 + * waitWOC + * skriv 80 til d000:3688 + * sjekk om det ble 80 + */ + + /* Enable Receiver */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); + + /* Set the IENA bit in COR */ + wait_WOC(iobase); + outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR); +} + +/* + * Function netwave_hw_xmit (data, len, dev) + */ +static int netwave_hw_xmit(unsigned char* data, int len, + struct net_device* dev) { + unsigned long flags; + unsigned int TxFreeList, + curBuff, + MaxData, + DataOffset; + int tmpcount; + + netwave_private *priv = netdev_priv(dev); + u_char __iomem * ramBase = priv->ramBase; + kio_addr_t iobase = dev->base_addr; + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&priv->spinlock, flags); + + /* Check if there are transmit buffers available */ + wait_WOC(iobase); + if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) { + /* No buffers available */ + printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n", + dev->name); + spin_unlock_irqrestore(&priv->spinlock, flags); + return 1; + } + + priv->stats.tx_bytes += len; + + DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n", + readb(ramBase + NETWAVE_EREG_SPCQ), + readb(ramBase + NETWAVE_EREG_SPU), + readb(ramBase + NETWAVE_EREG_LIF), + readb(ramBase + NETWAVE_EREG_ISPLQ)); + + /* Now try to insert it into the adapters free memory */ + wait_WOC(iobase); + TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP); + MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2); + DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4); + + DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n", + TxFreeList, MaxData, DataOffset); + + /* Copy packet to the adapter fragment buffers */ + curBuff = TxFreeList; + tmpcount = 0; + while (tmpcount < len) { + int tmplen = len - tmpcount; + copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount, + (tmplen < MaxData) ? tmplen : MaxData); + tmpcount += MaxData; + + /* Advance to next buffer */ + curBuff = get_uint16(ramBase + curBuff); + } + + /* Now issue transmit list */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0); + writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1); + writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); + + spin_unlock_irqrestore(&priv->spinlock, flags); + return 0; +} + +static int netwave_start_xmit(struct sk_buff *skb, struct net_device *dev) { + /* This flag indicate that the hardware can't perform a transmission. + * Theoritically, NET3 check it before sending a packet to the driver, + * but in fact it never do that and pool continuously. + * As the watchdog will abort too long transmissions, we are quite safe... + */ + + netif_stop_queue(dev); + + { + short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + unsigned char* buf = skb->data; + + if (netwave_hw_xmit( buf, length, dev) == 1) { + /* Some error, let's make them call us another time? */ + netif_start_queue(dev); + } + dev->trans_start = jiffies; + } + dev_kfree_skb(skb); + + return 0; +} /* netwave_start_xmit */ + +/* + * Function netwave_interrupt (irq, dev_id, regs) + * + * This function is the interrupt handler for the Netwave card. This + * routine will be called whenever: + * 1. A packet is received. + * 2. A packet has successfully been transferred and the unit is + * ready to transmit another packet. + * 3. A command has completed execution. + */ +static irqreturn_t netwave_interrupt(int irq, void* dev_id, struct pt_regs *regs) +{ + kio_addr_t iobase; + u_char __iomem *ramBase; + struct net_device *dev = (struct net_device *)dev_id; + struct netwave_private *priv = netdev_priv(dev); + dev_link_t *link = &priv->link; + int i; + + if (!netif_device_present(dev)) + return IRQ_NONE; + + iobase = dev->base_addr; + ramBase = priv->ramBase; + + /* Now find what caused the interrupt, check while interrupts ready */ + for (i = 0; i < 10; i++) { + u_char status; + + wait_WOC(iobase); + if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02)) + break; /* None of the interrupt sources asserted (normal exit) */ + + status = inb(iobase + NETWAVE_REG_ASR); + + if (!DEV_OK(link)) { + DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x " + "from removed or suspended card!\n", status); + break; + } + + /* RxRdy */ + if (status & 0x80) { + netwave_rx(dev); + /* wait_WOC(iobase); */ + /* RxRdy cannot be reset directly by the host */ + } + /* RxErr */ + if (status & 0x40) { + u_char rser; + + rser = readb(ramBase + NETWAVE_EREG_RSER); + + if (rser & 0x04) { + ++priv->stats.rx_dropped; + ++priv->stats.rx_crc_errors; + } + if (rser & 0x02) + ++priv->stats.rx_frame_errors; + + /* Clear the RxErr bit in RSER. RSER+4 is the + * write part. Also clear the RxCRC (0x04) and + * RxBig (0x02) bits if present */ + wait_WOC(iobase); + writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4); + + /* Write bit 6 high to ASCC to clear RxErr in ASR, + * WOC must be set first! + */ + wait_WOC(iobase); + writeb(0x40, ramBase + NETWAVE_EREG_ASCC); + + /* Remember to count up priv->stats on error packets */ + ++priv->stats.rx_errors; + } + /* TxDN */ + if (status & 0x20) { + int txStatus; + + txStatus = readb(ramBase + NETWAVE_EREG_TSER); + DEBUG(3, "Transmit done. TSER = %x id %x\n", + txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1)); + + if (txStatus & 0x20) { + /* Transmitting was okay, clear bits */ + wait_WOC(iobase); + writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4); + ++priv->stats.tx_packets; + } + + if (txStatus & 0xd0) { + if (txStatus & 0x80) { + ++priv->stats.collisions; /* Because of /proc/net/dev*/ + /* ++priv->stats.tx_aborted_errors; */ + /* printk("Collision. %ld\n", jiffies - dev->trans_start); */ + } + if (txStatus & 0x40) + ++priv->stats.tx_carrier_errors; + /* 0x80 TxGU Transmit giveup - nine times and no luck + * 0x40 TxNOAP No access point. Discarded packet. + * 0x10 TxErr Transmit error. Always set when + * TxGU and TxNOAP is set. (Those are the only ones + * to set TxErr). + */ + DEBUG(3, "netwave_interrupt: TxDN with error status %x\n", + txStatus); + + /* Clear out TxGU, TxNOAP, TxErr and TxTrys */ + wait_WOC(iobase); + writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4); + ++priv->stats.tx_errors; + } + DEBUG(3, "New status is TSER %x ASR %x\n", + readb(ramBase + NETWAVE_EREG_TSER), + inb(iobase + NETWAVE_REG_ASR)); + + netif_wake_queue(dev); + } + /* TxBA, this would trigger on all error packets received */ + /* if (status & 0x01) { + DEBUG(4, "Transmit buffers available, %x\n", status); + } + */ + } + /* Handled if we looped at least one time - Jean II */ + return IRQ_RETVAL(i); +} /* netwave_interrupt */ + +/* + * Function netwave_watchdog (a) + * + * Watchdog : when we start a transmission, we set a timer in the + * kernel. If the transmission complete, this timer is disabled. If + * it expire, we reset the card. + * + */ +static void netwave_watchdog(struct net_device *dev) { + + DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name); + netwave_reset(dev); + dev->trans_start = jiffies; + netif_wake_queue(dev); +} /* netwave_watchdog */ + +static struct net_device_stats *netwave_get_stats(struct net_device *dev) { + netwave_private *priv = netdev_priv(dev); + + update_stats(dev); + + DEBUG(2, "netwave: SPCQ %x SPU %x LIF %x ISPLQ %x MHS %x rxtx %x" + " %x tx %x %x %x %x\n", + readb(priv->ramBase + NETWAVE_EREG_SPCQ), + readb(priv->ramBase + NETWAVE_EREG_SPU), + readb(priv->ramBase + NETWAVE_EREG_LIF), + readb(priv->ramBase + NETWAVE_EREG_ISPLQ), + readb(priv->ramBase + NETWAVE_EREG_MHS), + readb(priv->ramBase + NETWAVE_EREG_EC + 0xe), + readb(priv->ramBase + NETWAVE_EREG_EC + 0xf), + readb(priv->ramBase + NETWAVE_EREG_EC + 0x18), + readb(priv->ramBase + NETWAVE_EREG_EC + 0x19), + readb(priv->ramBase + NETWAVE_EREG_EC + 0x1a), + readb(priv->ramBase + NETWAVE_EREG_EC + 0x1b)); + + return &priv->stats; +} + +static void update_stats(struct net_device *dev) { + //unsigned long flags; +/* netwave_private *priv = netdev_priv(dev); */ + + //spin_lock_irqsave(&priv->spinlock, flags); + +/* priv->stats.rx_packets = readb(priv->ramBase + 0x18e); + priv->stats.tx_packets = readb(priv->ramBase + 0x18f); */ + + //spin_unlock_irqrestore(&priv->spinlock, flags); +} + +static int netwave_rx(struct net_device *dev) +{ + netwave_private *priv = netdev_priv(dev); + u_char __iomem *ramBase = priv->ramBase; + kio_addr_t iobase = dev->base_addr; + u_char rxStatus; + struct sk_buff *skb = NULL; + unsigned int curBuffer, + rcvList; + int rcvLen; + int tmpcount = 0; + int dataCount, dataOffset; + int i; + u_char *ptr; + + DEBUG(3, "xinw_rx: Receiving ... \n"); + + /* Receive max 10 packets for now. */ + for (i = 0; i < 10; i++) { + /* Any packets? */ + wait_WOC(iobase); + rxStatus = readb(ramBase + NETWAVE_EREG_RSER); + if ( !( rxStatus & 0x80)) /* No more packets */ + break; + + /* Check if multicast/broadcast or other */ + /* multicast = (rxStatus & 0x20); */ + + /* The receive list pointer and length of the packet */ + wait_WOC(iobase); + rcvLen = get_int16( ramBase + NETWAVE_EREG_RDP); + rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2); + + if (rcvLen < 0) { + printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n", + rcvLen); + return 0; + } + + skb = dev_alloc_skb(rcvLen+5); + if (skb == NULL) { + DEBUG(1, "netwave_rx: Could not allocate an sk_buff of " + "length %d\n", rcvLen); + ++priv->stats.rx_dropped; + /* Tell the adapter to skip the packet */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); + return 0; + } + + skb_reserve( skb, 2); /* Align IP on 16 byte */ + skb_put( skb, rcvLen); + skb->dev = dev; + + /* Copy packet fragments to the skb data area */ + ptr = (u_char*) skb->data; + curBuffer = rcvList; + tmpcount = 0; + while ( tmpcount < rcvLen) { + /* Get length and offset of current buffer */ + dataCount = get_uint16( ramBase+curBuffer+2); + dataOffset = get_uint16( ramBase+curBuffer+4); + + copy_from_pc( ptr + tmpcount, + ramBase+curBuffer+dataOffset, dataCount); + + tmpcount += dataCount; + + /* Point to next buffer */ + curBuffer = get_uint16(ramBase + curBuffer); + } + + skb->protocol = eth_type_trans(skb,dev); + /* Queue packet for network layer */ + netif_rx(skb); + + dev->last_rx = jiffies; + priv->stats.rx_packets++; + priv->stats.rx_bytes += rcvLen; + + /* Got the packet, tell the adapter to skip it */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); + DEBUG(3, "Packet reception ok\n"); + } + return 0; +} + +static int netwave_open(struct net_device *dev) { + netwave_private *priv = netdev_priv(dev); + dev_link_t *link = &priv->link; + + DEBUG(1, "netwave_open: starting.\n"); + + if (!DEV_OK(link)) + return -ENODEV; + + link->open++; + + netif_start_queue(dev); + netwave_reset(dev); + + return 0; +} + +static int netwave_close(struct net_device *dev) { + netwave_private *priv = netdev_priv(dev); + dev_link_t *link = &priv->link; + + DEBUG(1, "netwave_close: finishing.\n"); + + link->open--; + netif_stop_queue(dev); + + return 0; +} + +static struct pcmcia_driver netwave_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "netwave_cs", + }, + .attach = netwave_attach, + .detach = netwave_detach, +}; + +static int __init init_netwave_cs(void) +{ + return pcmcia_register_driver(&netwave_driver); +} + +static void __exit exit_netwave_cs(void) +{ + pcmcia_unregister_driver(&netwave_driver); + BUG_ON(dev_list != NULL); +} + +module_init(init_netwave_cs); +module_exit(exit_netwave_cs); + +/* Set or clear the multicast filter for this adaptor. + num_addrs == -1 Promiscuous mode, receive all packets + num_addrs == 0 Normal mode, clear multicast list + num_addrs > 0 Multicast mode, receive normal and MC packets, and do + best-effort filtering. + */ +static void set_multicast_list(struct net_device *dev) +{ + kio_addr_t iobase = dev->base_addr; + netwave_private *priv = netdev_priv(dev); + u_char __iomem * ramBase = priv->ramBase; + u_char rcvMode = 0; + +#ifdef PCMCIA_DEBUG + if (pc_debug > 2) { + static int old; + if (old != dev->mc_count) { + old = dev->mc_count; + DEBUG(0, "%s: setting Rx mode to %d addresses.\n", + dev->name, dev->mc_count); + } + } +#endif + + if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) { + /* Multicast Mode */ + rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast; + } else if (dev->flags & IFF_PROMISC) { + /* Promiscous mode */ + rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast; + } else { + /* Normal mode */ + rcvMode = rxConfRxEna + rxConfBcast; + } + + /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/ + /* Now set receive mode */ + wait_WOC(iobase); + writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0); + writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); +} +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c new file mode 100644 index 00000000000..a3a32430ae9 --- /dev/null +++ b/drivers/net/wireless/orinoco.c @@ -0,0 +1,4243 @@ +/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) + * + * A driver for Hermes or Prism 2 chipset based PCMCIA wireless + * adaptors, with Lucent/Agere, Intersil or Symbol firmware. + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * (C) Copyright David Gibson, IBM Corporation 2001-2003. + * Copyright (C) 2000 David Gibson, Linuxcare Australia. + * With some help from : + * Copyright (C) 2001 Jean Tourrilhes, HP Labs + * Copyright (C) 2001 Benjamin Herrenschmidt + * + * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 + * + * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy + * AT fasta.fh-dortmund.de> + * http://www.stud.fh-dortmund.de/~andy/wvlan/ + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds AT users.sourceforge.net>. Portions created by David + * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights + * Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. */ + +/* + * v0.01 -> v0.02 - 21/3/2001 - Jean II + * o Allow to use regular ethX device name instead of dldwdX + * o Warning on IBSS with ESSID=any for firmware 6.06 + * o Put proper range.throughput values (optimistic) + * o IWSPY support (IOCTL and stat gather in Rx path) + * o Allow setting frequency in Ad-Hoc mode + * o Disable WEP setting if !has_wep to work on old firmware + * o Fix txpower range + * o Start adding support for Samsung/Compaq firmware + * + * v0.02 -> v0.03 - 23/3/2001 - Jean II + * o Start adding Symbol support - need to check all that + * o Fix Prism2/Symbol WEP to accept 128 bits keys + * o Add Symbol WEP (add authentication type) + * o Add Prism2/Symbol rate + * o Add PM timeout (holdover duration) + * o Enable "iwconfig eth0 key off" and friends (toggle flags) + * o Enable "iwconfig eth0 power unicast/all" (toggle flags) + * o Try with an Intel card. It report firmware 1.01, behave like + * an antiquated firmware, however on windows it says 2.00. Yuck ! + * o Workaround firmware bug in allocate buffer (Intel 1.01) + * o Finish external renaming to orinoco... + * o Testing with various Wavelan firmwares + * + * v0.03 -> v0.04 - 30/3/2001 - Jean II + * o Update to Wireless 11 -> add retry limit/lifetime support + * o Tested with a D-Link DWL 650 card, fill in firmware support + * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot) + * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-( + * It works on D-Link *only* after a tcpdump. Weird... + * And still doesn't work on Intel card. Grrrr... + * o Update the mode after a setport3 + * o Add preamble setting for Symbol cards (not yet enabled) + * o Don't complain as much about Symbol cards... + * + * v0.04 -> v0.04b - 22/4/2001 - David Gibson + * o Removed the 'eth' parameter - always use ethXX as the + * interface name instead of dldwdXX. The other was racy + * anyway. + * o Clean up RID definitions in hermes.h, other cleanups + * + * v0.04b -> v0.04c - 24/4/2001 - Jean II + * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card + * with vendor 02 and firmware 0.08. Added in the capabilities... + * o Tested Lucent firmware 7.28, everything works... + * + * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt + * o Spin-off Pcmcia code. This file is renamed orinoco.c, + * and orinoco_cs.c now contains only the Pcmcia specific stuff + * o Add Airport driver support on top of orinoco.c (see airport.c) + * + * v0.05 -> v0.05a - 4/5/2001 - Jean II + * o Revert to old Pcmcia code to fix breakage of Ben's changes... + * + * v0.05a -> v0.05b - 4/5/2001 - Jean II + * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V + * o D-Link firmware doesn't support multicast. We just print a few + * error messages, but otherwise everything works... + * o For David : set/getport3 works fine, just upgrade iwpriv... + * + * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt + * o Adapt airport.c to latest changes in orinoco.c + * o Remove deferred power enabling code + * + * v0.05c -> v0.05d - 5/5/2001 - Jean II + * o Workaround to SNAP decapsulate frame from Linksys AP + * original patch from : Dong Liu <dliu AT research.bell-labs.com> + * (note : the memcmp bug was mine - fixed) + * o Remove set_retry stuff, no firmware support it (bloat--). + * + * v0.05d -> v0.06 - 25/5/2001 - Jean II + * Original patch from "Hong Lin" <alin AT redhat.com>, + * "Ian Kinner" <ikinner AT redhat.com> + * and "David Smith" <dsmith AT redhat.com> + * o Init of priv->tx_rate_ctrl in firmware specific section. + * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh ! + * o Spectrum card always need cor_reset (for every reset) + * o Fix cor_reset to not lose bit 7 in the register + * o flush_stale_links to remove zombie Pcmcia instances + * o Ack previous hermes event before reset + * Me (with my little hands) + * o Allow orinoco.c to call cor_reset via priv->card_reset_handler + * o Add priv->need_card_reset to toggle this feature + * o Fix various buglets when setting WEP in Symbol firmware + * Now, encryption is fully functional on Symbol cards. Youpi ! + * + * v0.06 -> v0.06b - 25/5/2001 - Jean II + * o IBSS on Symbol use port_mode = 4. Please don't ask... + * + * v0.06b -> v0.06c - 29/5/2001 - Jean II + * o Show first spy address in /proc/net/wireless for IBSS mode as well + * + * v0.06c -> v0.06d - 6/7/2001 - David Gibson + * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus' + * wishes to reduce the number of unnecessary messages. + * o Removed bogus message on CRC error. + * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn + * <willwaghorn AT yahoo.co.uk> + * o Slight cleanup/re-arrangement of firmware detection code. + * + * v0.06d -> v0.06e - 1/8/2001 - David Gibson + * o Removed some redundant global initializers (orinoco_cs.c). + * o Added some module metadata + * + * v0.06e -> v0.06f - 14/8/2001 - David Gibson + * o Wording fix to license + * o Added a 'use_alternate_encaps' module parameter for APs which need an + * oui of 00:00:00. We really need a better way of handling this, but + * the module flag is better than nothing for now. + * + * v0.06f -> v0.07 - 20/8/2001 - David Gibson + * o Removed BAP error retries from hermes_bap_seek(). For Tx we now + * let the upper layers handle the retry, we retry explicitly in the + * Rx path, but don't make as much noise about it. + * o Firmware detection cleanups. + * + * v0.07 -> v0.07a - 1/10/3001 - Jean II + * o Add code to read Symbol firmware revision, inspired by latest code + * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee ! + * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me + * a 3Com card with a recent firmware, fill out Symbol firmware + * capabilities of latest rev (2.20), as well as older Symbol cards. + * o Disable Power Management in newer Symbol firmware, the API + * has changed (documentation needed). + * + * v0.07a -> v0.08 - 3/10/2001 - David Gibson + * o Fixed a possible buffer overrun found by the Stanford checker (in + * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not + * a big problem. + * o Turned has_big_wep on for Intersil cards. That's not true for all of + * them but we should at least let the capable ones try. + * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I + * realized that my assumption that the driver's serialization + * would prevent the BAP being busy on entry was possibly false, because + * things other than seeks may make the BAP busy. + * o Use "alternate" (oui 00:00:00) encapsulation by default. + * Setting use_old_encaps will mimic the old behaviour, but I think we + * will be able to eliminate this. + * o Don't try to make __initdata const (the version string). This can't + * work because of the way the __initdata sectioning works. + * o Added MODULE_LICENSE tags. + * o Support for PLX (transparent PCMCIA->PCI bridge) cards. + * o Changed to using the new type-fascist min/max. + * + * v0.08 -> v0.08a - 9/10/2001 - David Gibson + * o Inserted some missing acknowledgements/info into the Changelog. + * o Fixed some bugs in the normalization of signal level reporting. + * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware, + * which led to an instant crash on big-endian machines. + * + * v0.08a -> v0.08b - 20/11/2001 - David Gibson + * o Lots of cleanup and bugfixes in orinoco_plx.c + * o Cleanup to handling of Tx rate setting. + * o Removed support for old encapsulation method. + * o Removed old "dldwd" names. + * o Split RID constants into a new file hermes_rid.h + * o Renamed RID constants to match linux-wlan-ng and prism2.o + * o Bugfixes in hermes.c + * o Poke the PLX's INTCSR register, so it actually starts + * generating interrupts. These cards might actually work now. + * o Update to wireless extensions v12 (Jean II) + * o Support for tallies and inquire command (Jean II) + * o Airport updates for newer PPC kernels (BenH) + * + * v0.08b -> v0.09 - 21/12/2001 - David Gibson + * o Some new PCI IDs for PLX cards. + * o Removed broken attempt to do ALLMULTI reception. Just use + * promiscuous mode instead + * o Preliminary work for list-AP (Jean II) + * o Airport updates from (BenH) + * o Eliminated racy hw_ready stuff + * o Fixed generation of fake events in irq handler. This should + * finally kill the EIO problems (Jean II & dgibson) + * o Fixed breakage of bitrate set/get on Agere firmware (Jean II) + * + * v0.09 -> v0.09a - 2/1/2002 - David Gibson + * o Fixed stupid mistake in multicast list handling, triggering + * a BUG() + * + * v0.09a -> v0.09b - 16/1/2002 - David Gibson + * o Fixed even stupider mistake in new interrupt handling, which + * seriously broke things on big-endian machines. + * o Removed a bunch of redundant includes and exports. + * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c + * o Don't attempt to do hardware level multicast reception on + * Intersil firmware, just go promisc instead. + * o Typo fixed in hermes_issue_cmd() + * o Eliminated WIRELESS_SPY #ifdefs + * o Status code reported on Tx exceptions + * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC + * interrupts, which should fix the timeouts we're seeing. + * + * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson + * o Removed nested structures used for header parsing, so the + * driver should now work without hackery on ARM + * o Fix for WEP handling on Intersil (Hawk Newton) + * o Eliminated the /proc/hermes/ethXX/regs debugging file. It + * was never very useful. + * o Make Rx errors less noisy. + * + * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson + * o Laid the groundwork in hermes.[ch] for devices which map + * into PCI memory space rather than IO space. + * o Fixed bug in multicast handling (cleared multicast list when + * leaving promiscuous mode). + * o Relegated Tx error messages to debug. + * o Cleaned up / corrected handling of allocation lengths. + * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc). + * o Change to using alloc_etherdev() for structure allocations. + * o Check for and drop undersized packets. + * o Fixed a race in stopping/waking the queue. This should fix + * the timeout problems (Pavel Roskin) + * o Reverted to netif_wake_queue() on the ALLOC event. + * o Fixes for recent Symbol firmwares which lack AP density + * (Pavel Roskin). + * + * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson + * o Handle different register spacing, necessary for Prism 2.5 + * PCI adaptors (Steve Hill). + * o Cleaned up initialization of card structures in orinoco_cs + * and airport. Removed card->priv field. + * o Make response structure optional for hermes_docmd_wait() + * Pavel Roskin) + * o Added PCI id for Nortel emobility to orinoco_plx.c. + * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin) + * o Cleanups to firmware capability detection. + * o Arrange for orinoco_pci.c to override firmware detection. + * We should be able to support the PCI Intersil cards now. + * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin). + * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni + * Malinen). + * o Makefile changes for better integration into David Hinds + * pcmcia-cs package. + * + * v0.11a -> v0.11b - 1 May 2002 - David Gibson + * o Better error reporting in orinoco_plx_init_one() + * o Fixed multiple bad kfree() bugs introduced by the + * alloc_orinocodev() changes. + * + * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson + * o Support changing the MAC address. + * o Correct display of Intersil firmware revision numbers. + * o Entirely revised locking scheme. Should be both simpler and + * better. + * o Merged some common code in orinoco_plx, orinoco_pci and + * airport by creating orinoco_default_{open,stop,reset}() + * which are used as the dev->open, dev->stop, priv->reset + * callbacks if none are specified when alloc_orinocodev() is + * called. + * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt(). + * They didn't do anything. + * + * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson + * o Some rearrangement of code. + * o Numerous fixups to locking and rest handling, particularly + * for PCMCIA. + * o This allows open and stop net_device methods to be in + * orinoco.c now, rather than in the init modules. + * o In orinoco_cs.c link->priv now points to the struct + * net_device not to the struct orinoco_private. + * o Added a check for undersized SNAP frames, which could cause + * crashes. + * + * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson + * o Fix hw->num_init testing code, so num_init is actually + * incremented. + * o Fix very stupid bug in orinoco_cs which broke compile with + * CONFIG_SMP. + * o Squashed a warning. + * + * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson + * o Change to C9X style designated initializers. + * o Add support for 3Com AirConnect PCI. + * o No longer ignore the hard_reset argument to + * alloc_orinocodev(). Oops. + * + * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson + * o Revert the broken 0.12* locking scheme and go to a new yet + * simpler scheme. + * o Do firmware resets only in orinoco_init() and when waking + * the card from hard sleep. + * + * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson + * o Re-introduced full resets (via schedule_task()) on Tx + * timeout. + * + * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson + * o Minor cleanups to info frame handling. Add basic support + * for linkstatus info frames. + * o Include required kernel headers in orinoco.h, to avoid + * compile problems. + * + * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson + * o Implemented hard reset for Airport cards + * o Experimental suspend/resume implementation for orinoco_pci + * o Abolished /proc debugging support, replaced with a debugging + * iwpriv. Now it's ugly and simple instead of ugly and complex. + * o Bugfix in hermes.c if the firmware returned a record length + * of 0, we could go clobbering memory. + * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable + * was set, which was usually true on PCMCIA hot removes. + * o Track LINKSTATUS messages, silently drop Tx packets before + * we are connected (avoids confusing the firmware), and only + * give LINKSTATUS printk()s if the status has changed. + * + * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson + * o Cleanup: use dev instead of priv in various places. + * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event + * if we're in the middle of a (driver initiated) hard reset. + * o Bug fix: ETH_ZLEN is supposed to include the header + * (Dionysus Blazakis & Manish Karir) + * o Convert to using workqueues instead of taskqueues (and + * backwards compatibility macros for pre 2.5.41 kernels). + * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in + * airport.c + * o New orinoco_tmd.c init module from Joerg Dorchain for + * TMD7160 based PCI to PCMCIA bridges (similar to + * orinoco_plx.c). + * + * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson + * o Make hw_unavailable a counter, rather than just a flag, this + * is necessary to avoid some races (such as a card being + * removed in the middle of orinoco_reset(). + * o Restore Release/RequestConfiguration in the PCMCIA event handler + * when dealing with a driver initiated hard reset. This is + * necessary to prevent hangs due to a spurious interrupt while + * the reset is in progress. + * o Clear the 802.11 header when transmitting, even though we + * don't use it. This fixes a long standing bug on some + * firmwares, which seem to get confused if that isn't done. + * o Be less eager to de-encapsulate SNAP frames, only do so if + * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old + * behaviour broke CDP (Cisco Discovery Protocol). + * o Use dev instead of priv for free_irq() as well as + * request_irq() (oops). + * o Attempt to reset rather than giving up if we get too many + * IRQs. + * o Changed semantics of __orinoco_down() so it can be called + * safely with hw_unavailable set. It also now clears the + * linkstatus (since we're going to have to reassociate). + * + * v0.13d -> v0.13e - 12 May 2003 - David Gibson + * o Support for post-2.5.68 return values from irq handler. + * o Fixed bug where underlength packets would be double counted + * in the rx_dropped statistics. + * o Provided a module parameter to suppress linkstatus messages. + * + * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson + * o Replaced priv->connected logic with netif_carrier_on/off() + * calls. + * o Remove has_ibss_any and never set the CREATEIBSS RID when + * the ESSID is empty. Too many firmwares break if we do. + * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove + * __devinitdata from PCI ID tables, use free_netdev(). + * o Enabled shared-key authentication for Agere firmware (from + * Robert J. Moore <Robert.J.Moore AT allanbank.com> + * o Move netif_wake_queue() (back) to the Tx completion from the + * ALLOC event. This seems to prevent/mitigate the rolling + * error -110 problems at least on some Intersil firmwares. + * Theoretically reduces performance, but I can't measure it. + * Patch from Andrew Tridgell <tridge AT samba.org> + * + * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson + * o Correctly turn off shared-key authentication when requested + * (bugfix from Robert J. Moore). + * o Correct airport sleep interfaces for current 2.6 kernels. + * o Add code for key change without disabling/enabling the MAC + * port. This is supposed to allow 802.1x to work sanely, but + * doesn't seem to yet. + * + * TODO + * o New wireless extensions API (patch from Moustafa + * Youssef, updated by Jim Carter and Pavel Roskin). + * o Handle de-encapsulation within network layer, provide 802.11 + * headers (patch from Thomas 'Dent' Mirlacher) + * o RF monitor mode support + * o Fix possible races in SPY handling. + * o Disconnect wireless extensions from fundamental configuration. + * o (maybe) Software WEP support (patch from Stano Meduna). + * o (maybe) Use multiple Tx buffers - driver handling queue + * rather than firmware. + */ + +/* Locking and synchronization: + * + * The basic principle is that everything is serialized through a + * single spinlock, priv->lock. The lock is used in user, bh and irq + * context, so when taken outside hardirq context it should always be + * taken with interrupts disabled. The lock protects both the + * hardware and the struct orinoco_private. + * + * Another flag, priv->hw_unavailable indicates that the hardware is + * unavailable for an extended period of time (e.g. suspended, or in + * the middle of a hard reset). This flag is protected by the + * spinlock. All code which touches the hardware should check the + * flag after taking the lock, and if it is set, give up on whatever + * they are doing and drop the lock again. The orinoco_lock() + * function handles this (it unlocks and returns -EBUSY if + * hw_unavailable is non-zero). + */ + +#define DRIVER_NAME "orinoco" + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +#include "hermes.h" +#include "hermes_rid.h" +#include "orinoco.h" +#include "ieee802_11.h" + +/********************************************************************/ +/* Module information */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Level of debugging. Used in the macros in orinoco.h */ +#ifdef ORINOCO_DEBUG +int orinoco_debug = ORINOCO_DEBUG; +module_param(orinoco_debug, int, 0644); +MODULE_PARM_DESC(orinoco_debug, "Debug level"); +EXPORT_SYMBOL(orinoco_debug); +#endif + +static int suppress_linkstatus; /* = 0 */ +module_param(suppress_linkstatus, bool, 0644); +MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); + +/********************************************************************/ +/* Compile time configuration and compatibility stuff */ +/********************************************************************/ + +/* We do this this way to avoid ifdefs in the actual code */ +#ifdef WIRELESS_SPY +#define SPY_NUMBER(priv) (priv->spy_number) +#else +#define SPY_NUMBER(priv) 0 +#endif /* WIRELESS_SPY */ + +/********************************************************************/ +/* Internal constants */ +/********************************************************************/ + +#define ORINOCO_MIN_MTU 256 +#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD) + +#define SYMBOL_MAX_VER_LEN (14) +#define USER_BAP 0 +#define IRQ_BAP 1 +#define MAX_IRQLOOPS_PER_IRQ 10 +#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of + * how many events the + * device could + * legitimately generate */ +#define SMALL_KEY_SIZE 5 +#define LARGE_KEY_SIZE 13 +#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ + +#define DUMMY_FID 0xFFFF + +/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ + HERMES_MAX_MULTICAST : 0)*/ +#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) + +#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ + | HERMES_EV_TX | HERMES_EV_TXEXC \ + | HERMES_EV_WTERR | HERMES_EV_INFO \ + | HERMES_EV_INFDROP ) + +/********************************************************************/ +/* Data tables */ +/********************************************************************/ + +/* The frequency of each channel in MHz */ +static const long channel_frequency[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; +#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) + +/* This tables gives the actual meanings of the bitrate IDs returned + * by the firmware. */ +static struct { + int bitrate; /* in 100s of kilobits */ + int automatic; + u16 agere_txratectrl; + u16 intersil_txratectrl; +} bitrate_table[] = { + {110, 1, 3, 15}, /* Entry 0 is the default */ + {10, 0, 1, 1}, + {10, 1, 1, 1}, + {20, 0, 2, 2}, + {20, 1, 6, 3}, + {55, 0, 4, 4}, + {55, 1, 7, 7}, + {110, 0, 5, 8}, +}; +#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) + +/********************************************************************/ +/* Data types */ +/********************************************************************/ + +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + u16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + u16 ethertype; +} __attribute__ ((packed)); + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; + +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +struct hermes_rx_descriptor { + u16 status; + u32 time; + u8 silence; + u8 signal; + u8 rate; + u8 rxflow; + u32 reserved; +} __attribute__ ((packed)); + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int __orinoco_program_rids(struct net_device *dev); +static void __orinoco_set_multicast_list(struct net_device *dev); +static int orinoco_debug_dump_recs(struct net_device *dev); + +/********************************************************************/ +/* Internal helper functions */ +/********************************************************************/ + +static inline void set_port_type(struct orinoco_private *priv) +{ + switch (priv->iw_mode) { + case IW_MODE_INFRA: + priv->port_type = 1; + priv->createibss = 0; + break; + case IW_MODE_ADHOC: + if (priv->prefer_port3) { + priv->port_type = 3; + priv->createibss = 0; + } else { + priv->port_type = priv->ibss_port; + priv->createibss = 1; + } + break; + default: + printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", + priv->ndev->name); + } +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int orinoco_open(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = __orinoco_up(dev); + + if (! err) + priv->open = 1; + + orinoco_unlock(priv, &flags); + + return err; +} + +int orinoco_stop(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + + /* We mustn't use orinoco_lock() here, because we need to be + able to close the interface even if hw_unavailable is set + (e.g. as we're released after a PC Card removal) */ + spin_lock_irq(&priv->lock); + + priv->open = 0; + + err = __orinoco_down(dev); + + spin_unlock_irq(&priv->lock); + + return err; +} + +static struct net_device_stats *orinoco_get_stats(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + + return &priv->stats; +} + +static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_statistics *wstats = &priv->wstats; + int err = 0; + unsigned long flags; + + if (! netif_device_present(dev)) { + printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", + dev->name); + return NULL; /* FIXME: Can we do better than this? */ + } + + if (orinoco_lock(priv, &flags) != 0) + return NULL; /* FIXME: Erg, we've been signalled, how + * do we propagate this back up? */ + + if (priv->iw_mode == IW_MODE_ADHOC) { + memset(&wstats->qual, 0, sizeof(wstats->qual)); + /* If a spy address is defined, we report stats of the + * first spy address - Jean II */ + if (SPY_NUMBER(priv)) { + wstats->qual.qual = priv->spy_stat[0].qual; + wstats->qual.level = priv->spy_stat[0].level; + wstats->qual.noise = priv->spy_stat[0].noise; + wstats->qual.updated = priv->spy_stat[0].updated; + } + } else { + struct { + u16 qual, signal, noise; + } __attribute__ ((packed)) cq; + + err = HERMES_READ_RECORD(hw, USER_BAP, + HERMES_RID_COMMSQUALITY, &cq); + + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = 7; + } + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: We're in user context (I think?), so we should just + wait for the tallies to come through */ + err = hermes_inquire(hw, HERMES_INQ_TALLIES); + + orinoco_unlock(priv, &flags); + + if (err) + return NULL; + + return wstats; +} + +static void orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " + "called when hw_unavailable\n", dev->name); + return; + } + + __orinoco_set_multicast_list(dev); + orinoco_unlock(priv, &flags); +} + +static int orinoco_change_mtu(struct net_device *dev, int new_mtu) +{ + struct orinoco_private *priv = netdev_priv(dev); + + if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) + return -EINVAL; + + if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) > + (priv->nicbuf_size - ETH_HLEN) ) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} + +/********************************************************************/ +/* Tx path */ +/********************************************************************/ + +static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + hermes_t *hw = &priv->hw; + int err = 0; + u16 txfid = priv->txfid; + char *p; + struct ethhdr *eh; + int len, data_len, data_off; + struct hermes_tx_descriptor desc; + unsigned long flags; + + TRACE_ENTER(dev->name); + + if (! netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + TRACE_EXIT(dev->name); + return 1; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + TRACE_EXIT(dev->name); + return 1; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", + dev->name); + TRACE_EXIT(dev->name); + return 1; + } + + if (! netif_carrier_ok(dev)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + stats->tx_errors++; + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + TRACE_EXIT(dev->name); + return 0; + } + + /* Length of the packet body */ + /* FIXME: what if the skb is smaller than this? */ + len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN); + + eh = (struct ethhdr *)skb->data; + + memset(&desc, 0, sizeof(desc)); + desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx descriptor " + "to BAP\n", dev->name, err); + stats->tx_errors++; + goto fail; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + + /* Encapsulate Ethernet-II frames */ + if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ + struct header_struct hdr; + data_len = len; + data_off = HERMES_802_3_OFFSET + sizeof(hdr); + p = skb->data + ETH_HLEN; + + /* 802.3 header */ + memcpy(hdr.dest, eh->h_dest, ETH_ALEN); + memcpy(hdr.src, eh->h_source, ETH_ALEN); + hdr.len = htons(data_len + ENCAPS_OVERHEAD); + + /* 802.2 header */ + memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr)); + + hdr.ethertype = eh->h_proto; + err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), + txfid, HERMES_802_3_OFFSET); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing packet " + "header to BAP\n", dev->name, err); + stats->tx_errors++; + goto fail; + } + } else { /* IEEE 802.3 frame */ + data_len = len + ETH_HLEN; + data_off = HERMES_802_3_OFFSET; + p = skb->data; + } + + /* Round up for odd length packets */ + err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), + txfid, data_off); + if (err) { + printk(KERN_ERR "%s: Error %d writing packet to BAP\n", + dev->name, err); + stats->tx_errors++; + goto fail; + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, + txfid, NULL); + if (err) { + netif_start_queue(dev); + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + stats->tx_errors++; + goto fail; + } + + dev->trans_start = jiffies; + stats->tx_bytes += data_off + data_len; + + orinoco_unlock(priv, &flags); + + dev_kfree_skb(skb); + + TRACE_EXIT(dev->name); + + return 0; + fail: + TRACE_EXIT(dev->name); + + orinoco_unlock(priv, &flags); + return err; +} + +static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 fid = hermes_read_regn(hw, ALLOCFID); + + if (fid != priv->txfid) { + if (fid != DUMMY_FID) + printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", + dev->name, fid); + return; + } + + hermes_write_regn(hw, ALLOCFID, DUMMY_FID); +} + +static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + stats->tx_packets++; + + netif_wake_queue(dev); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 fid = hermes_read_regn(hw, TXCOMPLFID); + struct hermes_tx_descriptor desc; + int err = 0; + + if (fid == DUMMY_FID) + return; /* Nothing's really happened */ + + err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " + "(FID=%04X error %d)\n", + dev->name, fid, err); + } else { + DEBUG(1, "%s: Tx error, status %d\n", + dev->name, le16_to_cpu(desc.status)); + } + + stats->tx_errors++; + + netif_wake_queue(dev); + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void orinoco_tx_timeout(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + printk(KERN_WARNING "%s: Tx timeout! " + "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", + dev->name, hermes_read_regn(hw, ALLOCFID), + hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); + + stats->tx_errors++; + + schedule_work(&priv->reset_work); +} + +/********************************************************************/ +/* Rx path (data frames) */ +/********************************************************************/ + +/* Does the frame have a SNAP header indicating it should be + * de-encapsulated to Ethernet-II? */ +static inline int is_ethersnap(void *_hdr) +{ + u8 *hdr = _hdr; + + /* We de-encapsulate all packets which, a) have SNAP headers + * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header + * and where b) the OUI of the SNAP header is 00:00:00 or + * 00:00:f8 - we need both because different APs appear to use + * different OUIs for some reason */ + return (memcmp(hdr, &encaps_hdr, 5) == 0) + && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); +} + +static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, + int level, int noise) +{ + struct orinoco_private *priv = netdev_priv(dev); + int i; + + /* Gather wireless spy statistics: for each packet, compare the + * source address with out list, and if match, get the stats... */ + for (i = 0; i < priv->spy_number; i++) + if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) { + priv->spy_stat[i].level = level - 0x95; + priv->spy_stat[i].noise = noise - 0x95; + priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0; + priv->spy_stat[i].updated = 7; + } +} + +static void orinoco_stat_gather(struct net_device *dev, + struct sk_buff *skb, + struct hermes_rx_descriptor *desc) +{ + struct orinoco_private *priv = netdev_priv(dev); + + /* Using spy support with lots of Rx packets, like in an + * infrastructure (AP), will really slow down everything, because + * the MAC address must be compared to each entry of the spy list. + * If the user really asks for it (set some address in the + * spy list), we do it, but he will pay the price. + * Note that to get here, you need both WIRELESS_SPY + * compiled in AND some addresses in the list !!! + */ + /* Note : gcc will optimise the whole section away if + * WIRELESS_SPY is not defined... - Jean II */ + if (SPY_NUMBER(priv)) { + orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN, + desc->signal, desc->silence); + } +} + +static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct iw_statistics *wstats = &priv->wstats; + struct sk_buff *skb = NULL; + u16 rxfid, status; + int length, data_len, data_off; + char *p; + struct hermes_rx_descriptor desc; + struct header_struct hdr; + struct ethhdr *eh; + int err; + + rxfid = hermes_read_regn(hw, RXFID); + + err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), + rxfid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading Rx descriptor. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } + + status = le16_to_cpu(desc.status); + + if (status & HERMES_RXSTAT_ERR) { + if (status & HERMES_RXSTAT_UNDECRYPTABLE) { + wstats->discard.code++; + DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", + dev->name); + } else { + stats->rx_crc_errors++; + DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name); + } + stats->rx_errors++; + goto drop; + } + + /* For now we ignore the 802.11 header completely, assuming + that the card's firmware has handled anything vital */ + + err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr), + rxfid, HERMES_802_3_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame header. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } + + length = ntohs(hdr.len); + + /* Sanity checks */ + if (length < 3) { /* No for even an 802.2 LLC header */ + /* At least on Symbol firmware with PCF we get quite a + lot of these legitimately - Poll frames with no + data. */ + stats->rx_dropped++; + goto drop; + } + if (length > IEEE802_11_DATA_LEN) { + printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", + dev->name, length); + stats->rx_length_errors++; + stats->rx_errors++; + goto drop; + } + + /* We need space for the packet data itself, plus an ethernet + header, plus 2 bytes so we can align the IP header on a + 32bit boundary, plus 1 byte so we can read in odd length + packets from the card, which has an IO granularity of 16 + bits */ + skb = dev_alloc_skb(length+ETH_HLEN+2+1); + if (!skb) { + printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", + dev->name); + goto drop; + } + + skb_reserve(skb, 2); /* This way the IP header is aligned */ + + /* Handle decapsulation + * In most cases, the firmware tell us about SNAP frames. + * For some reason, the SNAP frames sent by LinkSys APs + * are not properly recognised by most firmwares. + * So, check ourselves */ + if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(&hdr)) { + /* These indicate a SNAP within 802.2 LLC within + 802.11 frame which we'll need to de-encapsulate to + the original EthernetII frame. */ + + if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */ + stats->rx_length_errors++; + goto drop; + } + + /* Remove SNAP header, reconstruct EthernetII frame */ + data_len = length - ENCAPS_OVERHEAD; + data_off = HERMES_802_3_OFFSET + sizeof(hdr); + + eh = (struct ethhdr *)skb_put(skb, ETH_HLEN); + + memcpy(eh, &hdr, 2 * ETH_ALEN); + eh->h_proto = hdr.ethertype; + } else { + /* All other cases indicate a genuine 802.3 frame. No + decapsulation needed. We just throw the whole + thing in, and hope the protocol layer can deal with + it as 802.3 */ + data_len = length; + data_off = HERMES_802_3_OFFSET; + /* FIXME: we re-read from the card data we already read here */ + } + + p = skb_put(skb, data_len); + err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2), + rxfid, data_off); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } + + dev->last_rx = jiffies; + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + + /* Process the wireless stats if needed */ + orinoco_stat_gather(dev, skb, &desc); + + /* Pass the packet to the networking stack */ + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; + + return; + + drop: + stats->rx_dropped++; + + if (skb) + dev_kfree_skb_irq(skb); + return; +} + +/********************************************************************/ +/* Rx path (info frames) */ +/********************************************************************/ + +static void print_linkstatus(struct net_device *dev, u16 status) +{ + char * s; + + if (suppress_linkstatus) + return; + + switch (status) { + case HERMES_LINKSTATUS_NOT_CONNECTED: + s = "Not Connected"; + break; + case HERMES_LINKSTATUS_CONNECTED: + s = "Connected"; + break; + case HERMES_LINKSTATUS_DISCONNECTED: + s = "Disconnected"; + break; + case HERMES_LINKSTATUS_AP_CHANGE: + s = "AP Changed"; + break; + case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: + s = "AP Out of Range"; + break; + case HERMES_LINKSTATUS_AP_IN_RANGE: + s = "AP In Range"; + break; + case HERMES_LINKSTATUS_ASSOC_FAILED: + s = "Association Failed"; + break; + default: + s = "UNKNOWN"; + } + + printk(KERN_INFO "%s: New link status: %s (%04x)\n", + dev->name, s, status); +} + +static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 infofid; + struct { + u16 len; + u16 type; + } __attribute__ ((packed)) info; + int len, type; + int err; + + /* This is an answer to an INQUIRE command that we did earlier, + * or an information "event" generated by the card + * The controller return to us a pseudo frame containing + * the information in question - Jean II */ + infofid = hermes_read_regn(hw, INFOFID); + + /* Read the info frame header - don't try too hard */ + err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), + infofid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading info frame. " + "Frame dropped.\n", dev->name, err); + return; + } + + len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); + type = le16_to_cpu(info.type); + + switch (type) { + case HERMES_INQ_TALLIES: { + struct hermes_tallies_frame tallies; + struct iw_statistics *wstats = &priv->wstats; + + if (len > sizeof(tallies)) { + printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", + dev->name, len); + len = sizeof(tallies); + } + + /* Read directly the data (no seek) */ + hermes_read_words(hw, HERMES_DATA1, (void *) &tallies, + len / 2); /* FIXME: blech! */ + + /* Increment our various counters */ + /* wstats->discard.nwid - no wrong BSSID stuff */ + wstats->discard.code += + le16_to_cpu(tallies.RxWEPUndecryptable); + if (len == sizeof(tallies)) + wstats->discard.code += + le16_to_cpu(tallies.RxDiscards_WEPICVError) + + le16_to_cpu(tallies.RxDiscards_WEPExcluded); + wstats->discard.misc += + le16_to_cpu(tallies.TxDiscardsWrongSA); + wstats->discard.fragment += + le16_to_cpu(tallies.RxMsgInBadMsgFragments); + wstats->discard.retries += + le16_to_cpu(tallies.TxRetryLimitExceeded); + /* wstats->miss.beacon - no match */ + } + break; + case HERMES_INQ_LINKSTATUS: { + struct hermes_linkstatus linkstatus; + u16 newstatus; + int connected; + + if (len != sizeof(linkstatus)) { + printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", + dev->name, len); + break; + } + + hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus, + len / 2); + newstatus = le16_to_cpu(linkstatus.linkstatus); + + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) + || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) + || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); + + if (connected) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + if (newstatus != priv->last_linkstatus) + print_linkstatus(dev, newstatus); + + priv->last_linkstatus = newstatus; + } + break; + default: + printk(KERN_DEBUG "%s: Unknown information frame received: " + "type 0x%04x, length %d\n", dev->name, type, len); + /* We don't actually do anything about it */ + break; + } +} + +static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) +{ + if (net_ratelimit()) + printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); +} + +/********************************************************************/ +/* Internal hardware control routines */ +/********************************************************************/ + +int __orinoco_up(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_ERR "%s: Error %d configuring card\n", + dev->name, err); + return err; + } + + /* Fire things up again */ + hermes_set_irqmask(hw, ORINOCO_INTEN); + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_ERR "%s: Error %d enabling MAC port\n", + dev->name, err); + return err; + } + + netif_start_queue(dev); + + return 0; +} + +int __orinoco_down(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + netif_stop_queue(dev); + + if (! priv->hw_unavailable) { + if (! priv->broken_disableport) { + err = hermes_disable_port(hw, 0); + if (err) { + /* Some firmwares (e.g. Intersil 1.3.x) seem + * to have problems disabling the port, oh + * well, too bad. */ + printk(KERN_WARNING "%s: Error %d disabling MAC port\n", + dev->name, err); + priv->broken_disableport = 1; + } + } + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + } + + /* firmware will have to reassociate */ + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return 0; +} + +int orinoco_reinit_firmware(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + err = hermes_init(hw); + if (err) + return err; + + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO) { + /* Try workaround for old Symbol firmware bug */ + printk(KERN_WARNING "%s: firmware ALLOC bug detected " + "(old Symbol firmware?). Trying to work around... ", + dev->name); + + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err) + printk("failed!\n"); + else + printk("ok.\n"); + } + + return err; +} + +static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + + if (priv->bitratemode >= BITRATE_TABLE_SIZE) { + printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", + priv->ndev->name, priv->bitratemode); + return -EINVAL; + } + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[priv->bitratemode].agere_txratectrl); + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[priv->bitratemode].intersil_txratectrl); + break; + default: + BUG(); + } + + return err; +} + +/* Change the WEP keys and/or the current keys. Can be called + * either from __orinoco_hw_setup_wep() or directly from + * orinoco_ioctl_setiwencode(). In the later case the association + * with the AP is not broken (if the firmware can handle it), + * which is needed for 802.1x implementations. */ +static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFWEPKEYS_AGERE, + &priv->keys); + if (err) + return err; + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXKEY_AGERE, + priv->tx_key); + if (err) + return err; + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + { + int keylen; + int i; + + /* Force uniform key length to work around firmware bugs */ + keylen = le16_to_cpu(priv->keys[priv->tx_key].len); + + if (keylen > LARGE_KEY_SIZE) { + printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", + priv->ndev->name, priv->tx_key, keylen); + return -E2BIG; + } + + /* Write all 4 keys */ + for(i = 0; i < ORINOCO_MAX_KEYS; i++) { + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFDEFAULTKEY0 + i, + HERMES_BYTES_TO_RECLEN(keylen), + priv->keys[i].data); + if (err) + return err; + } + + /* Write the index of the key used in transmission */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPDEFAULTKEYID, + priv->tx_key); + if (err) + return err; + } + break; + } + + return 0; +} + +static int __orinoco_hw_setup_wep(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + int master_wep_flag; + int auth_flag; + + if (priv->wep_on) + __orinoco_hw_setup_wepkeys(priv); + + if (priv->wep_restrict) + auth_flag = HERMES_AUTH_SHARED_KEY; + else + auth_flag = HERMES_AUTH_OPEN; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ + if (priv->wep_on) { + /* Enable the shared-key authentication. */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION_AGERE, + auth_flag); + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPENABLED_AGERE, + priv->wep_on); + if (err) + return err; + break; + + case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ + if (priv->wep_on) { + if (priv->wep_restrict || + (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | + HERMES_WEP_EXCL_UNENCRYPTED; + else + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION, + auth_flag); + if (err) + return err; + } else + master_wep_flag = 0; + + if (priv->iw_mode == IW_MODE_MONITOR) + master_wep_flag |= HERMES_WEP_HOST_DECRYPT; + + /* Master WEP setting : on/off */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPFLAGS_INTERSIL, + master_wep_flag); + if (err) + return err; + + break; + } + + return 0; +} + +static int __orinoco_program_rids(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + struct hermes_idstring idbuf; + + /* Set the MAC address */ + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); + if (err) { + printk(KERN_ERR "%s: Error %d setting MAC address\n", + dev->name, err); + return err; + } + + /* Set up the link mode */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, + priv->port_type); + if (err) { + printk(KERN_ERR "%s: Error %d setting port type\n", + dev->name, err); + return err; + } + /* Set the channel/frequency */ + if (priv->channel == 0) { + printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name); + if (priv->createibss) + priv->channel = 10; + } + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel\n", + dev->name, err); + return err; + } + + if (priv->has_ibss) { + u16 createibss; + + if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { + printk(KERN_WARNING "%s: This firmware requires an " + "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); + /* With wvlan_cs, in this case, we would crash. + * hopefully, this driver will behave better... + * Jean II */ + createibss = 0; + } else { + createibss = priv->createibss; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFCREATEIBSS, + createibss); + if (err) { + printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", + dev->name, err); + return err; + } + } + + /* Set the desired ESSID */ + idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); + memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); + /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting OWNSSID\n", + dev->name, err); + return err; + } + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", + dev->name, err); + return err; + } + + /* Set the station name */ + idbuf.len = cpu_to_le16(strlen(priv->nick)); + memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting nickname\n", + dev->name, err); + return err; + } + + /* Set AP density */ + if (priv->has_sensitivity) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, + priv->ap_density); + if (err) { + printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " + "Disabling sensitivity control\n", + dev->name, err); + + priv->has_sensitivity = 0; + } + } + + /* Set RTS threshold */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting RTS threshold\n", + dev->name, err); + return err; + } + + /* Set fragmentation threshold or MWO robustness */ + if (priv->has_mwo) + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + priv->mwo_robust); + else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting fragmentation\n", + dev->name, err); + return err; + } + + /* Set bitrate */ + err = __orinoco_hw_set_bitrate(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting bitrate\n", + dev->name, err); + return err; + } + + /* Set power management */ + if (priv->has_pm) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, + priv->pm_on); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, + priv->pm_mcast); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + priv->pm_period); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + } + + /* Set preamble - only for Symbol so far... */ + if (priv->has_preamble) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + priv->preamble); + if (err) { + printk(KERN_ERR "%s: Error %d setting preamble\n", + dev->name, err); + return err; + } + } + + /* Set up encryption */ + if (priv->has_wep) { + err = __orinoco_hw_setup_wep(priv); + if (err) { + printk(KERN_ERR "%s: Error %d activating WEP\n", + dev->name, err); + return err; + } + } + + /* Set promiscuity / multicast*/ + priv->promiscuous = 0; + priv->mc_count = 0; + __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */ + + return 0; +} + +/* FIXME: return int? */ +static void +__orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + int promisc, mc_count; + + /* The Hermes doesn't seem to have an allmulti mode, so we go + * into promiscuous mode and let the upper levels deal. */ + if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || + (dev->mc_count > MAX_MULTICAST(priv)) ) { + promisc = 1; + mc_count = 0; + } else { + promisc = 0; + mc_count = dev->mc_count; + } + + if (promisc != priv->promiscuous) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPROMISCUOUSMODE, + promisc); + if (err) { + printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", + dev->name, err); + } else + priv->promiscuous = promisc; + } + + if (! promisc && (mc_count || priv->mc_count) ) { + struct dev_mc_list *p = dev->mc_list; + struct hermes_multicast mclist; + int i; + + for (i = 0; i < mc_count; i++) { + /* paranoia: is list shorter than mc_count? */ + BUG_ON(! p); + /* paranoia: bad address size in list? */ + BUG_ON(p->dmi_addrlen != ETH_ALEN); + + memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); + p = p->next; + } + + if (p) + printk(KERN_WARNING "%s: Multicast list is " + "longer than mc_count\n", dev->name); + + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, + HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), + &mclist); + if (err) + printk(KERN_ERR "%s: Error %d setting multicast list.\n", + dev->name, err); + else + priv->mc_count = mc_count; + } + + /* Since we can set the promiscuous flag when it wasn't asked + for, make sure the net_device knows about it. */ + if (priv->promiscuous) + dev->flags |= IFF_PROMISC; + else + dev->flags &= ~IFF_PROMISC; +} + +static int orinoco_reconfigure(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + unsigned long flags; + int err = 0; + + if (priv->broken_disableport) { + schedule_work(&priv->reset_work); + return 0; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_disable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n", + dev->name); + priv->broken_disableport = 1; + goto out; + } + + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_WARNING "%s: Unable to reconfigure card\n", + dev->name); + goto out; + } + + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", + dev->name); + goto out; + } + + out: + if (err) { + printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); + schedule_work(&priv->reset_work); + err = 0; + } + + orinoco_unlock(priv, &flags); + return err; + +} + +/* This must be called from user context, without locks held - use + * schedule_work() */ +static void orinoco_reset(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + /* When the hardware becomes available again, whatever + * detects that is responsible for re-initializing + * it. So no need for anything further */ + return; + + netif_stop_queue(dev); + + /* Shut off interrupts. Depending on what state the hardware + * is in, this might not work, but we'll try anyway */ + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + priv->hw_unavailable++; + priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ + netif_carrier_off(dev); + + orinoco_unlock(priv, &flags); + + if (priv->hard_reset) + err = (*priv->hard_reset)(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + /* FIXME: shutdown of some sort */ + return; + } + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", + dev->name, err); + return; + } + + spin_lock_irq(&priv->lock); /* This has to be called from user context */ + + priv->hw_unavailable--; + + /* priv->open or priv->hw_unavailable might have changed while + * we dropped the lock */ + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", + dev->name, err); + } else + dev->trans_start = jiffies; + } + + spin_unlock_irq(&priv->lock); + + return; +} + +/********************************************************************/ +/* Interrupt handler */ +/********************************************************************/ + +static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) +{ + printk(KERN_DEBUG "%s: TICK\n", dev->name); +} + +static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) +{ + /* This seems to happen a fair bit under load, but ignoring it + seems to work fine...*/ + printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", + dev->name); +} + +irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int count = MAX_IRQLOOPS_PER_IRQ; + u16 evstat, events; + /* These are used to detect a runaway interrupt situation */ + /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, + * we panic and shut down the hardware */ + static int last_irq_jiffy = 0; /* jiffies value the last time + * we were called */ + static int loops_this_jiffy = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + /* If hw is unavailable - we don't know if the irq was + * for us or not */ + return IRQ_HANDLED; + } + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + if (! events) { + orinoco_unlock(priv, &flags); + return IRQ_NONE; + } + + if (jiffies != last_irq_jiffy) + loops_this_jiffy = 0; + last_irq_jiffy = jiffies; + + while (events && count--) { + if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { + printk(KERN_WARNING "%s: IRQ handler is looping too " + "much! Resetting.\n", dev->name); + /* Disable interrupts for now */ + hermes_set_irqmask(hw, 0); + schedule_work(&priv->reset_work); + break; + } + + /* Check the card hasn't been removed */ + if (! hermes_present(hw)) { + DEBUG(0, "orinoco_interrupt(): card removed\n"); + break; + } + + if (events & HERMES_EV_TICK) + __orinoco_ev_tick(dev, hw); + if (events & HERMES_EV_WTERR) + __orinoco_ev_wterr(dev, hw); + if (events & HERMES_EV_INFDROP) + __orinoco_ev_infdrop(dev, hw); + if (events & HERMES_EV_INFO) + __orinoco_ev_info(dev, hw); + if (events & HERMES_EV_RX) + __orinoco_ev_rx(dev, hw); + if (events & HERMES_EV_TXEXC) + __orinoco_ev_txexc(dev, hw); + if (events & HERMES_EV_TX) + __orinoco_ev_tx(dev, hw); + if (events & HERMES_EV_ALLOC) + __orinoco_ev_alloc(dev, hw); + + hermes_write_regn(hw, EVACK, events); + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + }; + + orinoco_unlock(priv, &flags); + return IRQ_HANDLED; +} + +/********************************************************************/ +/* Initialization */ +/********************************************************************/ + +struct comp_id { + u16 id, variant, major, minor; +} __attribute__ ((packed)); + +static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) +{ + if (nic_id->id < 0x8000) + return FIRMWARE_TYPE_AGERE; + else if (nic_id->id == 0x8000 && nic_id->major == 0) + return FIRMWARE_TYPE_SYMBOL; + else + return FIRMWARE_TYPE_INTERSIL; +} + +/* Set priv->firmware type, determine firmware properties */ +static int determine_firmware(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + struct comp_id nic_id, sta_id; + unsigned int firmver; + char tmp[SYMBOL_MAX_VER_LEN+1]; + + /* Get the hardware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); + if (err) { + printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", + dev->name, err); + return err; + } + + le16_to_cpus(&nic_id.id); + le16_to_cpus(&nic_id.variant); + le16_to_cpus(&nic_id.major); + le16_to_cpus(&nic_id.minor); + printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", + dev->name, nic_id.id, nic_id.variant, + nic_id.major, nic_id.minor); + + priv->firmware_type = determine_firmware_type(&nic_id); + + /* Get the firmware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); + if (err) { + printk(KERN_ERR "%s: Cannot read station identity: error %d\n", + dev->name, err); + return err; + } + + le16_to_cpus(&sta_id.id); + le16_to_cpus(&sta_id.variant); + le16_to_cpus(&sta_id.major); + le16_to_cpus(&sta_id.minor); + printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", + dev->name, sta_id.id, sta_id.variant, + sta_id.major, sta_id.minor); + + switch (sta_id.id) { + case 0x15: + printk(KERN_ERR "%s: Primary firmware is active\n", + dev->name); + return -ENODEV; + case 0x14b: + printk(KERN_ERR "%s: Tertiary firmware is active\n", + dev->name); + return -ENODEV; + case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ + case 0x21: /* Symbol Spectrum24 Trilogy */ + break; + default: + printk(KERN_NOTICE "%s: Unknown station ID, please report\n", + dev->name); + break; + } + + /* Default capabilities */ + priv->has_sensitivity = 1; + priv->has_mwo = 0; + priv->has_preamble = 0; + priv->has_port3 = 1; + priv->has_ibss = 1; + priv->has_wep = 0; + priv->has_big_wep = 0; + + /* Determine capabilities from the firmware version */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, + ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); + + firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; + + priv->has_ibss = (firmver >= 0x60006); + priv->has_wep = (firmver >= 0x40020); + priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell + Gold cards from the others? */ + priv->has_mwo = (firmver >= 0x60000); + priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ + priv->ibss_port = 1; + + /* Tested with Agere firmware : + * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II + * Tested CableTron firmware : 4.32 => Anton */ + break; + case FIRMWARE_TYPE_SYMBOL: + /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ + /* Intel MAC : 00:02:B3:* */ + /* 3Com MAC : 00:50:DA:* */ + memset(tmp, 0, sizeof(tmp)); + /* Get the Symbol firmware version */ + err = hermes_read_ltv(hw, USER_BAP, + HERMES_RID_SECONDARYVERSION_SYMBOL, + SYMBOL_MAX_VER_LEN, NULL, &tmp); + if (err) { + printk(KERN_WARNING + "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", + dev->name, err); + firmver = 0; + tmp[0] = '\0'; + } else { + /* The firmware revision is a string, the format is + * something like : "V2.20-01". + * Quick and dirty parsing... - Jean II + */ + firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) + | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) + | (tmp[7] - '0'); + + tmp[SYMBOL_MAX_VER_LEN] = '\0'; + } + + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Symbol %s", tmp); + + priv->has_ibss = (firmver >= 0x20000); + priv->has_wep = (firmver >= 0x15012); + priv->has_big_wep = (firmver >= 0x20000); + priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || + (firmver >= 0x29000 && firmver < 0x30000) || + firmver >= 0x31000; + priv->has_preamble = (firmver >= 0x20000); + priv->ibss_port = 4; + /* Tested with Intel firmware : 0x20015 => Jean II */ + /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ + break; + case FIRMWARE_TYPE_INTERSIL: + /* D-Link, Linksys, Adtron, ZoomAir, and many others... + * Samsung, Compaq 100/200 and Proxim are slightly + * different and less well tested */ + /* D-Link MAC : 00:40:05:* */ + /* Addtron MAC : 00:90:D1:* */ + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Intersil %d.%d.%d", sta_id.major, sta_id.minor, + sta_id.variant); + + firmver = ((unsigned long)sta_id.major << 16) | + ((unsigned long)sta_id.minor << 8) | sta_id.variant; + + priv->has_ibss = (firmver >= 0x000700); /* FIXME */ + priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); + priv->has_pm = (firmver >= 0x000700); + + if (firmver >= 0x000800) + priv->ibss_port = 0; + else { + printk(KERN_NOTICE "%s: Intersil firmware earlier " + "than v0.8.x - several features not supported\n", + dev->name); + priv->ibss_port = 1; + } + break; + } + printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, + priv->fw_name); + + return 0; +} + +static int orinoco_init(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + struct hermes_idstring nickbuf; + u16 reclen; + int len; + + TRACE_ENTER(dev->name); + + /* No need to lock, the hw_unavailable flag is already set in + * alloc_orinocodev() */ + priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; + + /* Initialize the firmware */ + err = hermes_init(hw); + if (err != 0) { + printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", + dev->name, err); + goto out; + } + + err = determine_firmware(dev); + if (err != 0) { + printk(KERN_ERR "%s: Incompatible firmware, aborting\n", + dev->name); + goto out; + } + + if (priv->has_port3) + printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); + if (priv->has_ibss) + printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", + dev->name); + if (priv->has_wep) { + printk(KERN_DEBUG "%s: WEP supported, ", dev->name); + if (priv->has_big_wep) + printk("104-bit key\n"); + else + printk("40-bit key\n"); + } + + /* Get the MAC address */ + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + ETH_ALEN, NULL, dev->dev_addr); + if (err) { + printk(KERN_WARNING "%s: failed to read MAC address!\n", + dev->name); + goto out; + } + + printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", + dev->name, dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], + dev->dev_addr[5]); + + /* Get the station name */ + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + sizeof(nickbuf), &reclen, &nickbuf); + if (err) { + printk(KERN_ERR "%s: failed to read station name\n", + dev->name); + goto out; + } + if (nickbuf.len) + len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); + else + len = min(IW_ESSID_MAX_SIZE, 2 * reclen); + memcpy(priv->nick, &nickbuf.val, len); + priv->nick[len] = '\0'; + + printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); + + /* Get allowed channels */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, + &priv->channel_mask); + if (err) { + printk(KERN_ERR "%s: failed to read channel list!\n", + dev->name); + goto out; + } + + /* Get initial AP density */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, + &priv->ap_density); + if (err || priv->ap_density < 1 || priv->ap_density > 3) { + priv->has_sensitivity = 0; + } + + /* Get initial RTS threshold */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + &priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: failed to read RTS threshold!\n", + dev->name); + goto out; + } + + /* Get initial fragmentation settings */ + if (priv->has_mwo) + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &priv->mwo_robust); + else + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: failed to read fragmentation settings!\n", + dev->name); + goto out; + } + + /* Power management setup */ + if (priv->has_pm) { + priv->pm_on = 0; + priv->pm_mcast = 1; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + &priv->pm_period); + if (err) { + printk(KERN_ERR "%s: failed to read power management period!\n", + dev->name); + goto out; + } + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + &priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: failed to read power management timeout!\n", + dev->name); + goto out; + } + } + + /* Preamble setup */ + if (priv->has_preamble) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + &priv->preamble); + if (err) + goto out; + } + + /* Set up the default configuration */ + priv->iw_mode = IW_MODE_INFRA; + /* By default use IEEE/IBSS ad-hoc mode if we have it */ + priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); + set_port_type(priv); + priv->channel = 10; /* default channel, more-or-less arbitrary */ + + priv->promiscuous = 0; + priv->wep_on = 0; + priv->tx_key = 0; + + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO) { + /* Try workaround for old Symbol firmware bug */ + printk(KERN_WARNING "%s: firmware ALLOC bug detected " + "(old Symbol firmware?). Trying to work around... ", + dev->name); + + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err) + printk("failed!\n"); + else + printk("ok.\n"); + } + if (err) { + printk("%s: Error %d allocating Tx buffer\n", dev->name, err); + goto out; + } + + /* Make the hardware available, as long as it hasn't been + * removed elsewhere (e.g. by PCMCIA hot unplug) */ + spin_lock_irq(&priv->lock); + priv->hw_unavailable--; + spin_unlock_irq(&priv->lock); + + printk(KERN_DEBUG "%s: ready\n", dev->name); + + out: + TRACE_EXIT(dev->name); + return err; +} + +struct net_device *alloc_orinocodev(int sizeof_card, + int (*hard_reset)(struct orinoco_private *)) +{ + struct net_device *dev; + struct orinoco_private *priv; + + dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); + if (! dev) + return NULL; + priv = netdev_priv(dev); + priv->ndev = dev; + if (sizeof_card) + priv->card = (void *)((unsigned long)netdev_priv(dev) + + sizeof(struct orinoco_private)); + else + priv->card = NULL; + + /* Setup / override net_device fields */ + dev->init = orinoco_init; + dev->hard_start_xmit = orinoco_xmit; + dev->tx_timeout = orinoco_tx_timeout; + dev->watchdog_timeo = HZ; /* 1 second timeout */ + dev->get_stats = orinoco_get_stats; + dev->get_wireless_stats = orinoco_get_wireless_stats; + dev->do_ioctl = orinoco_ioctl; + dev->change_mtu = orinoco_change_mtu; + dev->set_multicast_list = orinoco_set_multicast_list; + /* we use the default eth_mac_addr for setting the MAC addr */ + + /* Set up default callbacks */ + dev->open = orinoco_open; + dev->stop = orinoco_stop; + priv->hard_reset = hard_reset; + + spin_lock_init(&priv->lock); + priv->open = 0; + priv->hw_unavailable = 1; /* orinoco_init() must clear this + * before anything else touches the + * hardware */ + INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); + + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return dev; + +} + +void free_orinocodev(struct net_device *dev) +{ + free_netdev(dev); +} + +/********************************************************************/ +/* Wireless extensions */ +/********************************************************************/ + +static int orinoco_hw_get_bssid(struct orinoco_private *priv, + char buf[ETH_ALEN]) +{ + hermes_t *hw = &priv->hw; + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, buf); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE+1]) +{ + hermes_t *hw = &priv->hw; + int err = 0; + struct hermes_idstring essidbuf; + char *p = (char *)(&essidbuf.val); + int len; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (strlen(priv->desired_essid) > 0) { + /* We read the desired SSID from the hardware rather + than from priv->desired_essid, just in case the + firmware is allowed to change it on us. I'm not + sure about this */ + /* My guess is that the OWNSSID should always be whatever + * we set to the card, whereas CURRENT_SSID is the one that + * may change... - Jean II */ + u16 rid; + + *active = 1; + + rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : + HERMES_RID_CNFDESIREDSSID; + + err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), + NULL, &essidbuf); + if (err) + goto fail_unlock; + } else { + *active = 0; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, + sizeof(essidbuf), NULL, &essidbuf); + if (err) + goto fail_unlock; + } + + len = le16_to_cpu(essidbuf.len); + + memset(buf, 0, IW_ESSID_MAX_SIZE+1); + memcpy(buf, p, len); + buf[len] = '\0'; + + fail_unlock: + orinoco_unlock(priv, &flags); + + return err; +} + +static long orinoco_hw_get_freq(struct orinoco_private *priv) +{ + + hermes_t *hw = &priv->hw; + int err = 0; + u16 channel; + long freq = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); + if (err) + goto out; + + /* Intersil firmware 1.3.5 returns 0 when the interface is down */ + if (channel == 0) { + err = -EBUSY; + goto out; + } + + if ( (channel < 1) || (channel > NUM_CHANNELS) ) { + printk(KERN_WARNING "%s: Channel out of range (%d)!\n", + priv->ndev->name, channel); + err = -EBUSY; + goto out; + + } + freq = channel_frequency[channel-1] * 100000; + + out: + orinoco_unlock(priv, &flags); + + if (err > 0) + err = -EBUSY; + return err ? err : freq; +} + +static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max) +{ + hermes_t *hw = &priv->hw; + struct hermes_idstring list; + unsigned char *p = (unsigned char *)&list.val; + int err = 0; + int num; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, + sizeof(list), NULL, &list); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + num = le16_to_cpu(list.len); + *numrates = num; + num = min(num, max); + + for (i = 0; i < num; i++) { + rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ + } + + return 0; +} + +static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + int mode; + struct iw_range range; + int numrates; + int i, k; + unsigned long flags; + + TRACE_ENTER(dev->name); + + if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range))) + return -EFAULT; + + rrq->length = sizeof(range); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + mode = priv->iw_mode; + orinoco_unlock(priv, &flags); + + memset(&range, 0, sizeof(range)); + + /* Much of this shamelessly taken from wvlan_cs.c. No idea + * what it all means -dgibson */ + range.we_version_compiled = WIRELESS_EXT; + range.we_version_source = 11; + + range.min_nwid = range.max_nwid = 0; /* We don't use nwids */ + + /* Set available channels/frequencies */ + range.num_channels = NUM_CHANNELS; + k = 0; + for (i = 0; i < NUM_CHANNELS; i++) { + if (priv->channel_mask & (1 << i)) { + range.freq[k].i = i + 1; + range.freq[k].m = channel_frequency[i] * 100000; + range.freq[k].e = 1; + k++; + } + + if (k >= IW_MAX_FREQUENCIES) + break; + } + range.num_frequency = k; + + range.sensitivity = 3; + + if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ + /* Quality stats meaningless in ad-hoc mode */ + range.max_qual.qual = 0; + range.max_qual.level = 0; + range.max_qual.noise = 0; + range.avg_qual.qual = 0; + range.avg_qual.level = 0; + range.avg_qual.noise = 0; + } else { + range.max_qual.qual = 0x8b - 0x2f; + range.max_qual.level = 0x2f - 0x95 - 1; + range.max_qual.noise = 0x2f - 0x95 - 1; + /* Need to get better values */ + range.avg_qual.qual = 0x24; + range.avg_qual.level = 0xC2; + range.avg_qual.noise = 0x9E; + } + + err = orinoco_hw_get_bitratelist(priv, &numrates, + range.bitrate, IW_MAX_BITRATES); + if (err) + return err; + range.num_bitrates = numrates; + + /* Set an indication of the max TCP throughput in bit/s that we can + * expect using this interface. May be use for QoS stuff... + * Jean II */ + if(numrates > 2) + range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ + else + range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ + + range.min_rts = 0; + range.max_rts = 2347; + range.min_frag = 256; + range.max_frag = 2346; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + if (priv->has_wep) { + range.max_encoding_tokens = ORINOCO_MAX_KEYS; + + range.encoding_size[0] = SMALL_KEY_SIZE; + range.num_encoding_sizes = 1; + + if (priv->has_big_wep) { + range.encoding_size[1] = LARGE_KEY_SIZE; + range.num_encoding_sizes = 2; + } + } else { + range.num_encoding_sizes = 0; + range.max_encoding_tokens = 0; + } + orinoco_unlock(priv, &flags); + + range.min_pmp = 0; + range.max_pmp = 65535000; + range.min_pmt = 0; + range.max_pmt = 65535 * 1000; /* ??? */ + range.pmp_flags = IW_POWER_PERIOD; + range.pmt_flags = IW_POWER_TIMEOUT; + range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; + + range.num_txpower = 1; + range.txpower[0] = 15; /* 15dBm */ + range.txpower_capa = IW_TXPOW_DBM; + + range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range.retry_flags = IW_RETRY_LIMIT; + range.r_time_flags = IW_RETRY_LIFETIME; + range.min_retry = 0; + range.max_retry = 65535; /* ??? */ + range.min_r_time = 0; + range.max_r_time = 65535 * 1000; /* ??? */ + + if (copy_to_user(rrq->pointer, &range, sizeof(range))) + return -EFAULT; + + TRACE_EXIT(dev->name); + + return 0; +} + +static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + int setindex = priv->tx_key; + int enable = priv->wep_on; + int restricted = priv->wep_restrict; + u16 xlen = 0; + int err = 0; + char keybuf[ORINOCO_MAX_KEY_SIZE]; + unsigned long flags; + + if (! priv->has_wep) + return -EOPNOTSUPP; + + if (erq->pointer) { + /* We actually have a key to set - check its length */ + if (erq->length > LARGE_KEY_SIZE) + return -E2BIG; + + if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) + return -E2BIG; + + if (copy_from_user(keybuf, erq->pointer, erq->length)) + return -EFAULT; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (erq->pointer) { + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + /* Adjust key length to a supported value */ + if (erq->length > SMALL_KEY_SIZE) { + xlen = LARGE_KEY_SIZE; + } else if (erq->length > 0) { + xlen = SMALL_KEY_SIZE; + } else + xlen = 0; + + /* Switch on WEP if off */ + if ((!enable) && (xlen > 0)) { + setindex = index; + enable = 1; + } + } else { + /* Important note : if the user do "iwconfig eth0 enc off", + * we will arrive there with an index of -1. This is valid + * but need to be taken care off... Jean II */ + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { + if((index != -1) || (erq->flags == 0)) { + err = -EINVAL; + goto out; + } + } else { + /* Set the index : Check that the key is valid */ + if(priv->keys[index].len == 0) { + err = -EINVAL; + goto out; + } + setindex = index; + } + } + + if (erq->flags & IW_ENCODE_DISABLED) + enable = 0; + if (erq->flags & IW_ENCODE_OPEN) + restricted = 0; + if (erq->flags & IW_ENCODE_RESTRICTED) + restricted = 1; + + if (erq->pointer) { + priv->keys[index].len = cpu_to_le16(xlen); + memset(priv->keys[index].data, 0, + sizeof(priv->keys[index].data)); + memcpy(priv->keys[index].data, keybuf, erq->length); + } + priv->tx_key = setindex; + + /* Try fast key change if connected and only keys are changed */ + if (priv->wep_on && enable && (priv->wep_restrict == restricted) && + netif_carrier_ok(dev)) { + err = __orinoco_hw_setup_wepkeys(priv); + /* No need to commit if successful */ + goto out; + } + + priv->wep_on = enable; + priv->wep_restrict = restricted; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + u16 xlen = 0; + char keybuf[ORINOCO_MAX_KEY_SIZE]; + unsigned long flags; + + if (! priv->has_wep) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + erq->flags = 0; + if (! priv->wep_on) + erq->flags |= IW_ENCODE_DISABLED; + erq->flags |= index + 1; + + if (priv->wep_restrict) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + xlen = le16_to_cpu(priv->keys[index].len); + + erq->length = xlen; + + memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); + + orinoco_unlock(priv, &flags); + + if (erq->pointer) { + if (copy_to_user(erq->pointer, keybuf, xlen)) + return -EFAULT; + } + + return 0; +} + +static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char essidbuf[IW_ESSID_MAX_SIZE+1]; + unsigned long flags; + + /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it + * anyway... - Jean II */ + + memset(&essidbuf, 0, sizeof(essidbuf)); + + if (erq->flags) { + if (erq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + if (copy_from_user(&essidbuf, erq->pointer, erq->length)) + return -EFAULT; + + essidbuf[erq->length] = '\0'; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid)); + + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char essidbuf[IW_ESSID_MAX_SIZE+1]; + int active; + int err = 0; + unsigned long flags; + + TRACE_ENTER(dev->name); + + if (netif_running(dev)) { + err = orinoco_hw_get_essid(priv, &active, essidbuf); + if (err) + return err; + } else { + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf)); + orinoco_unlock(priv, &flags); + } + + erq->flags = 1; + erq->length = strlen(essidbuf) + 1; + if (erq->pointer) + if (copy_to_user(erq->pointer, essidbuf, erq->length)) + return -EFAULT; + + TRACE_EXIT(dev->name); + + return 0; +} + +static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char nickbuf[IW_ESSID_MAX_SIZE+1]; + unsigned long flags; + + if (nrq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + memset(nickbuf, 0, sizeof(nickbuf)); + + if (copy_from_user(nickbuf, nrq->pointer, nrq->length)) + return -EFAULT; + + nickbuf[nrq->length] = '\0'; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(priv->nick, nickbuf, sizeof(priv->nick)); + + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char nickbuf[IW_ESSID_MAX_SIZE+1]; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1); + orinoco_unlock(priv, &flags); + + nrq->length = strlen(nickbuf)+1; + + if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf))) + return -EFAULT; + + return 0; +} + +static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int chan = -1; + unsigned long flags; + + /* We can only use this in Ad-Hoc demo mode to set the operating + * frequency, or in IBSS mode to set the frequency where the IBSS + * will be created - Jean II */ + if (priv->iw_mode != IW_MODE_ADHOC) + return -EOPNOTSUPP; + + if ( (frq->e == 0) && (frq->m <= 1000) ) { + /* Setting by channel number */ + chan = frq->m; + } else { + /* Setting by frequency - search the table */ + int mult = 1; + int i; + + for (i = 0; i < (6 - frq->e); i++) + mult *= 10; + + for (i = 0; i < NUM_CHANNELS; i++) + if (frq->m == (channel_frequency[i] * mult)) + chan = i+1; + } + + if ( (chan < 1) || (chan > NUM_CHANNELS) || + ! (priv->channel_mask & (1 << (chan-1)) ) ) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->channel = chan; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + u16 val; + int err; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, &val); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + srq->value = val; + srq->fixed = 0; /* auto */ + + return 0; +} + +static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = srq->value; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if ((val < 1) || (val > 3)) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->ap_density = val; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = rrq->value; + unsigned long flags; + + if (rrq->disabled) + val = 2347; + + if ( (val < 0) || (val > 2347) ) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->rts_thresh = val; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->has_mwo) { + if (frq->disabled) + priv->mwo_robust = 0; + else { + if (frq->fixed) + printk(KERN_WARNING "%s: Fixed fragmentation is " + "not supported on this firmware. " + "Using MWO robust instead.\n", dev->name); + priv->mwo_robust = 1; + } + } else { + if (frq->disabled) + priv->frag_thresh = 2346; + else { + if ( (frq->value < 256) || (frq->value > 2346) ) + err = -EINVAL; + else + priv->frag_thresh = frq->value & ~0x1; /* must be even */ + } + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 val; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->has_mwo) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &val); + if (err) + val = 0; + + frq->value = val ? 2347 : 0; + frq->disabled = ! val; + frq->fixed = 0; + } else { + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &val); + if (err) + val = 0; + + frq->value = val; + frq->disabled = (val >= 2346); + frq->fixed = 1; + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + int ratemode = -1; + int bitrate; /* 100s of kilobits */ + int i; + unsigned long flags; + + /* As the user space doesn't know our highest rate, it uses -1 + * to ask us to set the highest rate. Test it using "iwconfig + * ethX rate auto" - Jean II */ + if (rrq->value == -1) + bitrate = 110; + else { + if (rrq->value % 100000) + return -EINVAL; + bitrate = rrq->value / 100000; + } + + if ( (bitrate != 10) && (bitrate != 20) && + (bitrate != 55) && (bitrate != 110) ) + return -EINVAL; + + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if ( (bitrate_table[i].bitrate == bitrate) && + (bitrate_table[i].automatic == ! rrq->fixed) ) { + ratemode = i; + break; + } + + if (ratemode == -1) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->bitratemode = ratemode; + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + int ratemode; + int i; + u16 val; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ratemode = priv->bitratemode; + + BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); + + rrq->value = bitrate_table[ratemode].bitrate * 100000; + rrq->fixed = ! bitrate_table[ratemode].automatic; + rrq->disabled = 0; + + /* If the interface is running we try to find more about the + current mode */ + if (netif_running(dev)) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CURRENTTXRATE, &val); + if (err) + goto out; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ + /* Note : in Lucent firmware, the return value of + * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, + * and therefore is totally different from the + * encoding of HERMES_RID_CNFTXRATECONTROL. + * Don't forget that 6Mb/s is really 5.5Mb/s */ + if (val == 6) + rrq->value = 5500000; + else + rrq->value = val * 1000000; + break; + case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if (bitrate_table[i].intersil_txratectrl == val) { + ratemode = i; + break; + } + if (i >= BITRATE_TABLE_SIZE) + printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", + dev->name, val); + + rrq->value = bitrate_table[ratemode].bitrate * 100000; + break; + default: + BUG(); + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (prq->disabled) { + priv->pm_on = 0; + } else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + priv->pm_mcast = 0; + priv->pm_on = 1; + break; + case IW_POWER_ALL_R: + priv->pm_mcast = 1; + priv->pm_on = 1; + break; + case IW_POWER_ON: + /* No flags : but we may have a value - Jean II */ + break; + default: + err = -EINVAL; + } + if (err) + goto out; + + if (prq->flags & IW_POWER_TIMEOUT) { + priv->pm_on = 1; + priv->pm_timeout = prq->value / 1000; + } + if (prq->flags & IW_POWER_PERIOD) { + priv->pm_on = 1; + priv->pm_period = prq->value / 1000; + } + /* It's valid to not have a value if we are just toggling + * the flags... Jean II */ + if(!priv->pm_on) { + err = -EINVAL; + goto out; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 enable, period, timeout, mcast; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, &period); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); + if (err) + goto out; + + prq->disabled = !enable; + /* Note : by default, display the period */ + if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + prq->flags = IW_POWER_TIMEOUT; + prq->value = timeout * 1000; + } else { + prq->flags = IW_POWER_PERIOD; + prq->value = period * 1000; + } + if (mcast) + prq->flags |= IW_POWER_ALL_R; + else + prq->flags |= IW_POWER_UNICAST_R; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 short_limit, long_limit, lifetime; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, + &short_limit); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, + &long_limit); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, + &lifetime); + if (err) + goto out; + + rrq->disabled = 0; /* Can't be disabled */ + + /* Note : by default, display the retry number */ + if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + rrq->flags = IW_RETRY_LIFETIME; + rrq->value = lifetime * 1000; /* ??? */ + } else { + /* By default, display the min number */ + if ((rrq->flags & IW_RETRY_MAX)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + rrq->value = long_limit; + } else { + rrq->flags = IW_RETRY_LIMIT; + rrq->value = short_limit; + if(short_limit != long_limit) + rrq->flags |= IW_RETRY_MIN; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) wrq->u.name ); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->ibss_port = val ; + + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *)wrq->u.name; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + *val = priv->ibss_port; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) wrq->u.name ); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (val) { + case 0: /* Try to do IEEE ad-hoc mode */ + if (! priv->has_ibss) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 0; + + break; + + case 1: /* Try to do Lucent proprietary ad-hoc mode */ + if (! priv->has_port3) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 1; + break; + + default: + err = -EINVAL; + } + + if (! err) + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *)wrq->u.name; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + *val = priv->prefer_port3; + orinoco_unlock(priv, &flags); + return 0; +} + +/* Spy is used for link quality/strength measurements in Ad-Hoc mode + * Jean II */ +static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct sockaddr address[IW_MAX_SPY]; + int number = srq->length; + int i; + int err = 0; + unsigned long flags; + + /* Check the number of addresses */ + if (number > IW_MAX_SPY) + return -E2BIG; + + /* Get the data in the driver */ + if (srq->pointer) { + if (copy_from_user(address, srq->pointer, + sizeof(struct sockaddr) * number)) + return -EFAULT; + } + + /* Make sure nobody mess with the structure while we do */ + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* orinoco_lock() doesn't disable interrupts, so make sure the + * interrupt rx path don't get confused while we copy */ + priv->spy_number = 0; + + if (number > 0) { + /* Extract the addresses */ + for (i = 0; i < number; i++) + memcpy(priv->spy_address[i], address[i].sa_data, + ETH_ALEN); + /* Reset stats */ + memset(priv->spy_stat, 0, + sizeof(struct iw_quality) * IW_MAX_SPY); + /* Set number of addresses */ + priv->spy_number = number; + } + + /* Now, let the others play */ + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct sockaddr address[IW_MAX_SPY]; + struct iw_quality spy_stat[IW_MAX_SPY]; + int number; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + number = priv->spy_number; + if ((number > 0) && (srq->pointer)) { + /* Create address struct */ + for (i = 0; i < number; i++) { + memcpy(address[i].sa_data, priv->spy_address[i], + ETH_ALEN); + address[i].sa_family = AF_UNIX; + } + /* Copy stats */ + /* In theory, we should disable irqs while copying the stats + * because the rx path might update it in the middle... + * Bah, who care ? - Jean II */ + memcpy(&spy_stat, priv->spy_stat, + sizeof(struct iw_quality) * IW_MAX_SPY); + for (i=0; i < number; i++) + priv->spy_stat[i].updated = 0; + } + + orinoco_unlock(priv, &flags); + + /* Push stuff to user space */ + srq->length = number; + if(copy_to_user(srq->pointer, address, + sizeof(struct sockaddr) * number)) + return -EFAULT; + if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number), + &spy_stat, sizeof(struct iw_quality) * number)) + return -EFAULT; + + return 0; +} + +static int +orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iwreq *wrq = (struct iwreq *)rq; + int err = 0; + int tmp; + int changed = 0; + unsigned long flags; + + TRACE_ENTER(dev->name); + + /* In theory, we could allow most of the the SET stuff to be + * done. In practice, the lapse of time at startup when the + * card is not ready is very short, so why bother... Note + * that netif_device_present is different from up/down + * (ifconfig), when the device is not yet up, it is usually + * already ready... Jean II */ + if (! netif_device_present(dev)) + return -ENODEV; + + switch (cmd) { + case SIOCGIWNAME: + strcpy(wrq->u.name, "IEEE 802.11-DS"); + break; + + case SIOCGIWAP: + wrq->u.ap_addr.sa_family = ARPHRD_ETHER; + err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data); + break; + + case SIOCGIWRANGE: + err = orinoco_ioctl_getiwrange(dev, &wrq->u.data); + break; + + case SIOCSIWMODE: + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + switch (wrq->u.mode) { + case IW_MODE_ADHOC: + if (! (priv->has_ibss || priv->has_port3) ) + err = -EINVAL; + else { + priv->iw_mode = IW_MODE_ADHOC; + changed = 1; + } + break; + + case IW_MODE_INFRA: + priv->iw_mode = IW_MODE_INFRA; + changed = 1; + break; + + default: + err = -EINVAL; + break; + } + set_port_type(priv); + orinoco_unlock(priv, &flags); + break; + + case SIOCGIWMODE: + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + wrq->u.mode = priv->iw_mode; + orinoco_unlock(priv, &flags); + break; + + case SIOCSIWENCODE: + err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding); + if (! err) + changed = 1; + break; + + case SIOCGIWENCODE: + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding); + break; + + case SIOCSIWESSID: + err = orinoco_ioctl_setessid(dev, &wrq->u.essid); + if (! err) + changed = 1; + break; + + case SIOCGIWESSID: + err = orinoco_ioctl_getessid(dev, &wrq->u.essid); + break; + + case SIOCSIWNICKN: + err = orinoco_ioctl_setnick(dev, &wrq->u.data); + if (! err) + changed = 1; + break; + + case SIOCGIWNICKN: + err = orinoco_ioctl_getnick(dev, &wrq->u.data); + break; + + case SIOCGIWFREQ: + tmp = orinoco_hw_get_freq(priv); + if (tmp < 0) { + err = tmp; + } else { + wrq->u.freq.m = tmp; + wrq->u.freq.e = 1; + } + break; + + case SIOCSIWFREQ: + err = orinoco_ioctl_setfreq(dev, &wrq->u.freq); + if (! err) + changed = 1; + break; + + case SIOCGIWSENS: + err = orinoco_ioctl_getsens(dev, &wrq->u.sens); + break; + + case SIOCSIWSENS: + err = orinoco_ioctl_setsens(dev, &wrq->u.sens); + if (! err) + changed = 1; + break; + + case SIOCGIWRTS: + wrq->u.rts.value = priv->rts_thresh; + wrq->u.rts.disabled = (wrq->u.rts.value == 2347); + wrq->u.rts.fixed = 1; + break; + + case SIOCSIWRTS: + err = orinoco_ioctl_setrts(dev, &wrq->u.rts); + if (! err) + changed = 1; + break; + + case SIOCSIWFRAG: + err = orinoco_ioctl_setfrag(dev, &wrq->u.frag); + if (! err) + changed = 1; + break; + + case SIOCGIWFRAG: + err = orinoco_ioctl_getfrag(dev, &wrq->u.frag); + break; + + case SIOCSIWRATE: + err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate); + if (! err) + changed = 1; + break; + + case SIOCGIWRATE: + err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate); + break; + + case SIOCSIWPOWER: + err = orinoco_ioctl_setpower(dev, &wrq->u.power); + if (! err) + changed = 1; + break; + + case SIOCGIWPOWER: + err = orinoco_ioctl_getpower(dev, &wrq->u.power); + break; + + case SIOCGIWTXPOW: + /* The card only supports one tx power, so this is easy */ + wrq->u.txpower.value = 15; /* dBm */ + wrq->u.txpower.fixed = 1; + wrq->u.txpower.disabled = 0; + wrq->u.txpower.flags = IW_TXPOW_DBM; + break; + + case SIOCSIWRETRY: + err = -EOPNOTSUPP; + break; + + case SIOCGIWRETRY: + err = orinoco_ioctl_getretry(dev, &wrq->u.retry); + break; + + case SIOCSIWSPY: + err = orinoco_ioctl_setspy(dev, &wrq->u.data); + break; + + case SIOCGIWSPY: + err = orinoco_ioctl_getspy(dev, &wrq->u.data); + break; + + case SIOCGIWPRIV: + if (wrq->u.data.pointer) { + struct iw_priv_args privtab[] = { + { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, + { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, + { SIOCIWFIRSTPRIV + 0x2, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_port3" }, + { SIOCIWFIRSTPRIV + 0x3, 0, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_port3" }, + { SIOCIWFIRSTPRIV + 0x4, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_preamble" }, + { SIOCIWFIRSTPRIV + 0x5, 0, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_preamble" }, + { SIOCIWFIRSTPRIV + 0x6, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_ibssport" }, + { SIOCIWFIRSTPRIV + 0x7, 0, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_ibssport" }, + { SIOCIWLASTPRIV, 0, 0, "dump_recs" }, + }; + + wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); + if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab))) + err = -EFAULT; + } + break; + + case SIOCIWFIRSTPRIV + 0x0: /* force_reset */ + case SIOCIWFIRSTPRIV + 0x1: /* card_reset */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + + schedule_work(&priv->reset_work); + break; + + case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + err = orinoco_ioctl_setport3(dev, wrq); + if (! err) + changed = 1; + break; + + case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */ + err = orinoco_ioctl_getport3(dev, wrq); + break; + + case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + /* 802.11b has recently defined some short preamble. + * Basically, the Phy header has been reduced in size. + * This increase performance, especially at high rates + * (the preamble is transmitted at 1Mb/s), unfortunately + * this give compatibility troubles... - Jean II */ + if(priv->has_preamble) { + int val = *( (int *) wrq->u.name ); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + if (val) + priv->preamble = 1; + else + priv->preamble = 0; + orinoco_unlock(priv, &flags); + changed = 1; + } else + err = -EOPNOTSUPP; + break; + + case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */ + if(priv->has_preamble) { + int *val = (int *)wrq->u.name; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + *val = priv->preamble; + orinoco_unlock(priv, &flags); + } else + err = -EOPNOTSUPP; + break; + case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + err = orinoco_ioctl_setibssport(dev, wrq); + if (! err) + changed = 1; + break; + + case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */ + err = orinoco_ioctl_getibssport(dev, wrq); + break; + + case SIOCIWLASTPRIV: + err = orinoco_debug_dump_recs(dev); + if (err) + printk(KERN_ERR "%s: Unable to dump records (%d)\n", + dev->name, err); + break; + + + default: + err = -EOPNOTSUPP; + } + + if (! err && changed && netif_running(dev)) { + err = orinoco_reconfigure(dev); + } + + TRACE_EXIT(dev->name); + + return err; +} + +struct { + u16 rid; + char *name; + int displaytype; +#define DISPLAY_WORDS 0 +#define DISPLAY_BYTES 1 +#define DISPLAY_STRING 2 +#define DISPLAY_XSTRING 3 +} record_table[] = { +#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type } + DEBUG_REC(CNFPORTTYPE,WORDS), + DEBUG_REC(CNFOWNMACADDR,BYTES), + DEBUG_REC(CNFDESIREDSSID,STRING), + DEBUG_REC(CNFOWNCHANNEL,WORDS), + DEBUG_REC(CNFOWNSSID,STRING), + DEBUG_REC(CNFOWNATIMWINDOW,WORDS), + DEBUG_REC(CNFSYSTEMSCALE,WORDS), + DEBUG_REC(CNFMAXDATALEN,WORDS), + DEBUG_REC(CNFPMENABLED,WORDS), + DEBUG_REC(CNFPMEPS,WORDS), + DEBUG_REC(CNFMULTICASTRECEIVE,WORDS), + DEBUG_REC(CNFMAXSLEEPDURATION,WORDS), + DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS), + DEBUG_REC(CNFOWNNAME,STRING), + DEBUG_REC(CNFOWNDTIMPERIOD,WORDS), + DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS), + DEBUG_REC(CNFWEPENABLED_AGERE,WORDS), + DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS), + DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS), + DEBUG_REC(CNFDEFAULTKEY0,BYTES), + DEBUG_REC(CNFDEFAULTKEY1,BYTES), + DEBUG_REC(CNFMWOROBUST_AGERE,WORDS), + DEBUG_REC(CNFDEFAULTKEY2,BYTES), + DEBUG_REC(CNFDEFAULTKEY3,BYTES), + DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS), + DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS), + DEBUG_REC(CNFAUTHENTICATION,WORDS), + DEBUG_REC(CNFMAXASSOCSTA,WORDS), + DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS), + DEBUG_REC(CNFTXCONTROL,WORDS), + DEBUG_REC(CNFROAMINGMODE,WORDS), + DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS), + DEBUG_REC(CNFRCVCRCERROR,WORDS), + DEBUG_REC(CNFMMLIFE,WORDS), + DEBUG_REC(CNFALTRETRYCOUNT,WORDS), + DEBUG_REC(CNFBEACONINT,WORDS), + DEBUG_REC(CNFAPPCFINFO,WORDS), + DEBUG_REC(CNFSTAPCFINFO,WORDS), + DEBUG_REC(CNFPRIORITYQUSAGE,WORDS), + DEBUG_REC(CNFTIMCTRL,WORDS), + DEBUG_REC(CNFTHIRTY2TALLY,WORDS), + DEBUG_REC(CNFENHSECURITY,WORDS), + DEBUG_REC(CNFGROUPADDRESSES,BYTES), + DEBUG_REC(CNFCREATEIBSS,WORDS), + DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS), + DEBUG_REC(CNFRTSTHRESHOLD,WORDS), + DEBUG_REC(CNFTXRATECONTROL,WORDS), + DEBUG_REC(CNFPROMISCUOUSMODE,WORDS), + DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS), + DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS), + DEBUG_REC(CNFSHORTPREAMBLE,WORDS), + DEBUG_REC(CNFWEPKEYS_AGERE,BYTES), + DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS), + DEBUG_REC(CNFTXKEY_AGERE,WORDS), + DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS), + DEBUG_REC(CNFBASICRATES,WORDS), + DEBUG_REC(CNFSUPPORTEDRATES,WORDS), + DEBUG_REC(CNFTICKTIME,WORDS), + DEBUG_REC(CNFSCANREQUEST,WORDS), + DEBUG_REC(CNFJOINREQUEST,WORDS), + DEBUG_REC(CNFAUTHENTICATESTATION,WORDS), + DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS), + DEBUG_REC(MAXLOADTIME,WORDS), + DEBUG_REC(DOWNLOADBUFFER,WORDS), + DEBUG_REC(PRIID,WORDS), + DEBUG_REC(PRISUPRANGE,WORDS), + DEBUG_REC(CFIACTRANGES,WORDS), + DEBUG_REC(NICSERNUM,XSTRING), + DEBUG_REC(NICID,WORDS), + DEBUG_REC(MFISUPRANGE,WORDS), + DEBUG_REC(CFISUPRANGE,WORDS), + DEBUG_REC(CHANNELLIST,WORDS), + DEBUG_REC(REGULATORYDOMAINS,WORDS), + DEBUG_REC(TEMPTYPE,WORDS), +/* DEBUG_REC(CIS,BYTES), */ + DEBUG_REC(STAID,WORDS), + DEBUG_REC(CURRENTSSID,STRING), + DEBUG_REC(CURRENTBSSID,BYTES), + DEBUG_REC(COMMSQUALITY,WORDS), + DEBUG_REC(CURRENTTXRATE,WORDS), + DEBUG_REC(CURRENTBEACONINTERVAL,WORDS), + DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS), + DEBUG_REC(PROTOCOLRSPTIME,WORDS), + DEBUG_REC(SHORTRETRYLIMIT,WORDS), + DEBUG_REC(LONGRETRYLIMIT,WORDS), + DEBUG_REC(MAXTRANSMITLIFETIME,WORDS), + DEBUG_REC(MAXRECEIVELIFETIME,WORDS), + DEBUG_REC(CFPOLLABLE,WORDS), + DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS), + DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS), + DEBUG_REC(OWNMACADDR,BYTES), + DEBUG_REC(SCANRESULTSTABLE,WORDS), + DEBUG_REC(PHYTYPE,WORDS), + DEBUG_REC(CURRENTCHANNEL,WORDS), + DEBUG_REC(CURRENTPOWERSTATE,WORDS), + DEBUG_REC(CCAMODE,WORDS), + DEBUG_REC(SUPPORTEDDATARATES,WORDS), + DEBUG_REC(BUILDSEQ,BYTES), + DEBUG_REC(FWID,XSTRING) +#undef DEBUG_REC +}; + +#define DEBUG_LTV_SIZE 128 + +static int orinoco_debug_dump_recs(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + u8 *val8; + u16 *val16; + int i,j; + u16 length; + int err; + + /* I'm not sure: we might have a lock here, so we'd better go + atomic, just in case. */ + val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC); + if (! val8) + return -ENOMEM; + val16 = (u16 *)val8; + + for (i = 0; i < ARRAY_SIZE(record_table); i++) { + u16 rid = record_table[i].rid; + int len; + + memset(val8, 0, DEBUG_LTV_SIZE + 2); + + err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE, + &length, val8); + if (err) { + DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid); + continue; + } + val16 = (u16 *)val8; + if (length == 0) + continue; + + printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=", + record_table[i].name, + rid, length, (length-1)*2); + len = min(((int)length-1)*2, DEBUG_LTV_SIZE); + + switch (record_table[i].displaytype) { + case DISPLAY_WORDS: + for (j = 0; j < len / 2; j++) + printk("%04X-", le16_to_cpu(val16[j])); + break; + + case DISPLAY_BYTES: + default: + for (j = 0; j < len; j++) + printk("%02X:", val8[j]); + break; + + case DISPLAY_STRING: + len = min(len, le16_to_cpu(val16[0])+2); + val8[len] = '\0'; + printk("\"%s\"", (char *)&val16[1]); + break; + + case DISPLAY_XSTRING: + printk("'%s'", (char *)val8); + } + + printk("\n"); + } + + kfree(val8); + + return 0; +} + +/********************************************************************/ +/* Debugging */ +/********************************************************************/ + +#if 0 +static void show_rx_frame(struct orinoco_rxframe_hdr *frame) +{ + printk(KERN_DEBUG "RX descriptor:\n"); + printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status); + printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time); + printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence); + printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal); + printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate); + printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow); + printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved); + + printk(KERN_DEBUG "IEEE 802.11 header:\n"); + printk(KERN_DEBUG " frame_ctl = 0x%04x\n", + frame->p80211.frame_ctl); + printk(KERN_DEBUG " duration_id = 0x%04x\n", + frame->p80211.duration_id); + printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr1[0], frame->p80211.addr1[1], + frame->p80211.addr1[2], frame->p80211.addr1[3], + frame->p80211.addr1[4], frame->p80211.addr1[5]); + printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr2[0], frame->p80211.addr2[1], + frame->p80211.addr2[2], frame->p80211.addr2[3], + frame->p80211.addr2[4], frame->p80211.addr2[5]); + printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr3[0], frame->p80211.addr3[1], + frame->p80211.addr3[2], frame->p80211.addr3[3], + frame->p80211.addr3[4], frame->p80211.addr3[5]); + printk(KERN_DEBUG " seq_ctl = 0x%04x\n", + frame->p80211.seq_ctl); + printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr4[0], frame->p80211.addr4[1], + frame->p80211.addr4[2], frame->p80211.addr4[3], + frame->p80211.addr4[4], frame->p80211.addr4[5]); + printk(KERN_DEBUG " data_len = 0x%04x\n", + frame->p80211.data_len); + + printk(KERN_DEBUG "IEEE 802.3 header:\n"); + printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p8023.h_dest[0], frame->p8023.h_dest[1], + frame->p8023.h_dest[2], frame->p8023.h_dest[3], + frame->p8023.h_dest[4], frame->p8023.h_dest[5]); + printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p8023.h_source[0], frame->p8023.h_source[1], + frame->p8023.h_source[2], frame->p8023.h_source[3], + frame->p8023.h_source[4], frame->p8023.h_source[5]); + printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto); + + printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n"); + printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap); + printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap); + printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl); + printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n", + frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]); + printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype); +} +#endif /* 0 */ + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +EXPORT_SYMBOL(alloc_orinocodev); +EXPORT_SYMBOL(free_orinocodev); + +EXPORT_SYMBOL(__orinoco_up); +EXPORT_SYMBOL(__orinoco_down); +EXPORT_SYMBOL(orinoco_stop); +EXPORT_SYMBOL(orinoco_reinit_firmware); + +EXPORT_SYMBOL(orinoco_interrupt); + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson <hermes@gibson.dropbear.id.au>, " + "Pavel Roskin <proski@gnu.org>, et al)"; + +static int __init init_orinoco(void) +{ + printk(KERN_DEBUG "%s\n", version); + return 0; +} + +static void __exit exit_orinoco(void) +{ +} + +module_init(init_orinoco); +module_exit(exit_orinoco); diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h new file mode 100644 index 00000000000..13e42c2afb2 --- /dev/null +++ b/drivers/net/wireless/orinoco.h @@ -0,0 +1,153 @@ +/* orinoco.h + * + * Common definitions to all pieces of the various orinoco + * drivers + */ + +#ifndef _ORINOCO_H +#define _ORINOCO_H + +#define DRIVER_VERSION "0.14alpha2" + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <linux/version.h> + +#include "hermes.h" + +/* To enable debug messages */ +//#define ORINOCO_DEBUG 3 + +#define WIRELESS_SPY // enable iwspy support + +#define ORINOCO_MAX_KEY_SIZE 14 +#define ORINOCO_MAX_KEYS 4 + +struct orinoco_key { + u16 len; /* always stored as little-endian */ + char data[ORINOCO_MAX_KEY_SIZE]; +} __attribute__ ((packed)); + +typedef enum { + FIRMWARE_TYPE_AGERE, + FIRMWARE_TYPE_INTERSIL, + FIRMWARE_TYPE_SYMBOL +} fwtype_t; + +struct orinoco_private { + void *card; /* Pointer to card dependent structure */ + int (*hard_reset)(struct orinoco_private *); + + /* Synchronisation stuff */ + spinlock_t lock; + int hw_unavailable; + struct work_struct reset_work; + + /* driver state */ + int open; + u16 last_linkstatus; + + /* Net device stuff */ + struct net_device *ndev; + struct net_device_stats stats; + struct iw_statistics wstats; + + /* Hardware control variables */ + hermes_t hw; + u16 txfid; + + /* Capabilities of the hardware/firmware */ + fwtype_t firmware_type; + char fw_name[32]; + int ibss_port; + int nicbuf_size; + u16 channel_mask; + + /* Boolean capabilities */ + unsigned int has_ibss:1; + unsigned int has_port3:1; + unsigned int has_wep:1; + unsigned int has_big_wep:1; + unsigned int has_mwo:1; + unsigned int has_pm:1; + unsigned int has_preamble:1; + unsigned int has_sensitivity:1; + unsigned int broken_disableport:1; + + /* Configuration paramaters */ + u32 iw_mode; + int prefer_port3; + u16 wep_on, wep_restrict, tx_key; + struct orinoco_key keys[ORINOCO_MAX_KEYS]; + int bitratemode; + char nick[IW_ESSID_MAX_SIZE+1]; + char desired_essid[IW_ESSID_MAX_SIZE+1]; + u16 frag_thresh, mwo_robust; + u16 channel; + u16 ap_density, rts_thresh; + u16 pm_on, pm_mcast, pm_period, pm_timeout; + u16 preamble; +#ifdef WIRELESS_SPY + int spy_number; + u_char spy_address[IW_MAX_SPY][ETH_ALEN]; + struct iw_quality spy_stat[IW_MAX_SPY]; +#endif + + /* Configuration dependent variables */ + int port_type, createibss; + int promiscuous, mc_count; +}; + +#ifdef ORINOCO_DEBUG +extern int orinoco_debug; +#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0) +#else +#define DEBUG(n, args...) do { } while (0) +#endif /* ORINOCO_DEBUG */ + +#define TRACE_ENTER(devname) DEBUG(2, "%s: -> %s()\n", devname, __FUNCTION__); +#define TRACE_EXIT(devname) DEBUG(2, "%s: <- %s()\n", devname, __FUNCTION__); + +/********************************************************************/ +/* Exported prototypes */ +/********************************************************************/ + +extern struct net_device *alloc_orinocodev(int sizeof_card, + int (*hard_reset)(struct orinoco_private *)); +extern void free_orinocodev(struct net_device *dev); +extern int __orinoco_up(struct net_device *dev); +extern int __orinoco_down(struct net_device *dev); +extern int orinoco_stop(struct net_device *dev); +extern int orinoco_reinit_firmware(struct net_device *dev); +extern irqreturn_t orinoco_interrupt(int irq, void * dev_id, struct pt_regs *regs); + +/********************************************************************/ +/* Locking and synchronization functions */ +/********************************************************************/ + +/* These functions *must* be inline or they will break horribly on + * SPARC, due to its weird semantics for save/restore flags. extern + * inline should prevent the kernel from linking or module from + * loading if they are not inlined. */ +extern inline int orinoco_lock(struct orinoco_private *priv, + unsigned long *flags) +{ + spin_lock_irqsave(&priv->lock, *flags); + if (priv->hw_unavailable) { + DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", + priv->ndev); + spin_unlock_irqrestore(&priv->lock, *flags); + return -EBUSY; + } + return 0; +} + +extern inline void orinoco_unlock(struct orinoco_private *priv, + unsigned long *flags) +{ + spin_unlock_irqrestore(&priv->lock, *flags); +} + +#endif /* _ORINOCO_H */ diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c new file mode 100644 index 00000000000..74a8227256a --- /dev/null +++ b/drivers/net/wireless/orinoco_cs.c @@ -0,0 +1,636 @@ +/* orinoco_cs.c (formerly known as dldwd_cs.c) + * + * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). + * It should also be usable on various Prism II based cards such as the + * Linksys, D-Link and Farallon Skyline. It should also work on Symbol + * cards such as the 3Com AirConnect and Ericsson WLAN. + * + * Copyright notice & release notes in file orinoco.c + */ + +#define DRIVER_NAME "orinoco_cs" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> +#ifdef __IN_PCMCIA_PACKAGE__ +#include <pcmcia/k_compat.h> +#endif /* __IN_PCMCIA_PACKAGE__ */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +#include "orinoco.h" + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Module parameters */ + +/* Some D-Link cards have buggy CIS. They do work at 5v properly, but + * don't have any CIS entry for it. This workaround it... */ +static int ignore_cis_vcc; /* = 0 */ +module_param(ignore_cis_vcc, int, 0); +MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); + +/********************************************************************/ +/* Magic constants */ +/********************************************************************/ + +/* + * The dev_info variable is the "key" that is used to match up this + * device driver with appropriate cards, through the card + * configuration database. + */ +static dev_info_t dev_info = DRIVER_NAME; + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +/* PCMCIA specific device information (goes in the card field of + * struct orinoco_private */ +struct orinoco_pccard { + dev_link_t link; + dev_node_t node; + + /* Used to handle hard reset */ + /* yuck, we need this hack to work around the insanity of the + * PCMCIA layer */ + unsigned long hard_reset_in_progress; +}; + +/* + * A linked list of "instances" of the device. Each actual PCMCIA + * card corresponds to one device instance, and is described by one + * dev_link_t structure (defined in ds.h). + */ +static dev_link_t *dev_list; /* = NULL */ + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +/* device methods */ +static int orinoco_cs_hard_reset(struct orinoco_private *priv); + +/* PCMCIA gumpf */ +static void orinoco_cs_config(dev_link_t * link); +static void orinoco_cs_release(dev_link_t * link); +static int orinoco_cs_event(event_t event, int priority, + event_callback_args_t * args); + +static dev_link_t *orinoco_cs_attach(void); +static void orinoco_cs_detach(dev_link_t *); + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int +orinoco_cs_hard_reset(struct orinoco_private *priv) +{ + struct orinoco_pccard *card = priv->card; + dev_link_t *link = &card->link; + int err; + + /* We need atomic ops here, because we're not holding the lock */ + set_bit(0, &card->hard_reset_in_progress); + + err = pcmcia_reset_card(link->handle, NULL); + if (err) + return err; + + msleep(100); + clear_bit(0, &card->hard_reset_in_progress); + + return 0; +} + +/********************************************************************/ +/* PCMCIA stuff */ +/********************************************************************/ + +/* + * This creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card + * Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a card + * insertion event. */ +static dev_link_t * +orinoco_cs_attach(void) +{ + struct net_device *dev; + struct orinoco_private *priv; + struct orinoco_pccard *card; + dev_link_t *link; + client_reg_t client_reg; + int ret; + + dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset); + if (! dev) + return NULL; + priv = netdev_priv(dev); + card = priv->card; + + /* Link both structures together */ + link = &card->link; + link->priv = dev; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = orinoco_interrupt; + link->irq.Instance = dev; + + /* General socket configuration defaults can go here. In this + * client, we assume very little, and rely on the CIS for + * almost everything. In most clients, many details (i.e., + * number, sizes, and attributes of IO windows) are fixed by + * the nature of the device, and can be hard-wired here. */ + link->conf.Attributes = 0; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + /* FIXME: need a lock? */ + link->next = dev_list; + dev_list = link; + + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &orinoco_cs_event; + client_reg.Version = 0x0210; /* FIXME: what does this mean? */ + client_reg.event_callback_args.client_data = link; + + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + orinoco_cs_detach(link); + return NULL; + } + + return link; +} /* orinoco_cs_attach */ + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void orinoco_cs_detach(dev_link_t *link) +{ + dev_link_t **linkp; + struct net_device *dev = link->priv; + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) + break; + + BUG_ON(*linkp == NULL); + + if (link->state & DEV_CONFIG) + orinoco_cs_release(link); + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, and free it */ + *linkp = link->next; + DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev); + if (link->dev) { + DEBUG(0, PFX "About to unregister net device %p\n", + dev); + unregister_netdev(dev); + } + free_orinocodev(dev); +} /* orinoco_cs_detach */ + +/* + * orinoco_cs_config() is scheduled to run after a CARD_INSERTION + * event is received, to configure the PCMCIA socket, and to make the + * device available to the system. + */ + +#define CS_CHECK(fn, ret) do { \ + last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ + } while (0) + +static void +orinoco_cs_config(dev_link_t *link) +{ + struct net_device *dev = link->priv; + client_handle_t handle = link->handle; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + hermes_t *hw = &priv->hw; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cisinfo_t info; + tuple_t tuple; + cisparse_t parse; + void __iomem *mem; + + CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info)); + + /* + * This reads the card's CONFIG tuple to find its + * configuration registers. + */ + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(handle, &conf)); + link->conf.Vcc = conf.Vcc; + + /* + * In this loop, we scan the CIS for configuration table + * entries, each of which describes a valid card + * configuration, including voltage, IO window, memory window, + * and interrupt settings. + * + * We make no assumptions about the card to be configured: we + * use just the information available in the CIS. In an ideal + * world, this would work for any PCMCIA card, but it requires + * a complete and accurate CIS. In practice, a driver usually + * "knows" most of these things without consulting the CIS, + * and most client drivers will only use the CIS to fill in + * implementation-defined details. + */ + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + cistpl_cftable_entry_t dflt = { .index = 0 }; + + if ( (pcmcia_get_tuple_data(handle, &tuple) != 0) + || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0)) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + dflt = *cfg; + if (cfg->index == 0) + goto next_entry; + link->conf.ConfigIndex = cfg->index; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); + if(!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = + (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = + IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = + IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = + io->flags & CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + link->io.Attributes2 = + link->io.Attributes1; + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + } + + + /* If we got this far, we're cool! */ + + break; + + next_entry: + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + last_ret = pcmcia_get_next_tuple(handle, &tuple); + if (last_ret == CS_NO_MORE_ITEMS) { + printk(KERN_ERR PFX "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + goto cs_failed; + } + } + + /* + * Allocate an interrupt line. Note that this does not assign + * a handler to the interrupt, unless the 'Handler' member of + * the irq structure is initialized. + */ + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ + mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + if (!mem) + goto cs_failed; + + hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping, and putting the + * card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + /* Ok, we have the configuration, prepare to register the netdev */ + dev->base_addr = link->io.BasePort1; + dev->irq = link->irq.AssignedIRQ; + SET_MODULE_OWNER(dev); + card->node.major = card->node.minor = 0; + + SET_NETDEV_DEV(dev, &handle_to_dev(handle)); + /* Tell the stack we exist */ + if (register_netdev(dev) != 0) { + printk(KERN_ERR PFX "register_netdev() failed\n"); + goto failed; + } + + /* At this point, the dev_node_t structure(s) needs to be + * initialized and arranged in a linked list at link->dev. */ + strcpy(card->node.dev_name, dev->name); + link->dev = &card->node; /* link->dev being non-NULL is also + used to indicate that the + net_device has been registered */ + link->state &= ~DEV_CONFIG_PENDING; + + /* Finally, report what we've done */ + printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d", + dev->name, link->conf.ConfigIndex, + link->conf.Vcc / 10, link->conf.Vcc % 10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1 / 10, + link->conf.Vpp1 % 10); + printk(", irq %d", link->irq.AssignedIRQ); + if (link->io.NumPorts1) + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1 + link->io.NumPorts1 - 1); + if (link->io.NumPorts2) + printk(" & 0x%04x-0x%04x", link->io.BasePort2, + link->io.BasePort2 + link->io.NumPorts2 - 1); + printk("\n"); + + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + + failed: + orinoco_cs_release(link); +} /* orinoco_cs_config */ + +/* + * After a card is removed, orinoco_cs_release() will unregister the + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void +orinoco_cs_release(dev_link_t *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + /* We're committed to taking the device away now, so mark the + * hardware as unavailable */ + spin_lock_irqsave(&priv->lock, flags); + priv->hw_unavailable++; + spin_unlock_irqrestore(&priv->lock, flags); + + /* Don't bother checking to see if these succeed or not */ + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; + if (priv->hw.iobase) + ioport_unmap(priv->hw.iobase); +} /* orinoco_cs_release */ + +/* + * The card status event handler. Mostly, this schedules other stuff + * to run after an event is received. + */ +static int +orinoco_cs_event(event_t event, int priority, + event_callback_args_t * args) +{ + dev_link_t *link = args->client_data; + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + int err = 0; + unsigned long flags; + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + netif_device_detach(dev); + priv->hw_unavailable++; + spin_unlock_irqrestore(&priv->lock, flags); + } + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + orinoco_cs_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + /* Mark the device as stopped, to block IO until later */ + if (link->state & DEV_CONFIG) { + /* This is probably racy, but I can't think of + a better way, short of rewriting the PCMCIA + layer to not suck :-( */ + if (! test_bit(0, &card->hard_reset_in_progress)) { + spin_lock_irqsave(&priv->lock, flags); + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: %s: Error %d downing interface\n", + dev->name, + event == CS_EVENT_PM_SUSPEND ? "SUSPEND" : "RESET_PHYSICAL", + err); + + netif_device_detach(dev); + priv->hw_unavailable++; + + spin_unlock_irqrestore(&priv->lock, flags); + } + + pcmcia_release_configuration(link->handle); + } + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + /* FIXME: should we double check that this is + * the same card as we had before */ + pcmcia_request_configuration(link->handle, &link->conf); + + if (! test_bit(0, &card->hard_reset_in_progress)) { + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware\n", + dev->name, err); + break; + } + + spin_lock_irqsave(&priv->lock, flags); + + netif_device_attach(dev); + priv->hw_unavailable--; + + if (priv->open && ! priv->hw_unavailable) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card\n", + dev->name, err); + + } + + spin_unlock_irqrestore(&priv->lock, flags); + } + } + break; + } + + return err; +} /* orinoco_cs_event */ + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson <hermes@gibson.dropbear.id.au>, " + "Pavel Roskin <proski@gnu.org>, et al)"; + +static struct pcmcia_driver orinoco_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRIVER_NAME, + }, + .attach = orinoco_cs_attach, + .detach = orinoco_cs_detach, +}; + +static int __init +init_orinoco_cs(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return pcmcia_register_driver(&orinoco_driver); +} + +static void __exit +exit_orinoco_cs(void) +{ + pcmcia_unregister_driver(&orinoco_driver); + BUG_ON(dev_list != NULL); +} + +module_init(init_orinoco_cs); +module_exit(exit_orinoco_cs); diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c new file mode 100644 index 00000000000..ff30d37e12e --- /dev/null +++ b/drivers/net/wireless/orinoco_pci.c @@ -0,0 +1,417 @@ +/* orinoco_pci.c + * + * Driver for Prism II devices that have a direct PCI interface + * (i.e., not in a Pcmcia or PLX bridge) + * + * Specifically here we're talking about the Linksys WMP11 + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * Some of this code is borrowed from orinoco_plx.c + * Copyright (C) 2001 Daniel Barlow <dan AT telent.net> + * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing + * has been copied from it. linux-wlan-ng-0.1.10 is originally : + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * This file originally written by: + * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com> + * And is now maintained by: + * (C) Copyright David Gibson, IBM Corp. 2002-2003. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +/* + * Theory of operation... + * ------------------- + * Maybe you had a look in orinoco_plx. Well, this is totally different... + * + * The card contains only one PCI region, which contains all the usual + * hermes registers. + * + * The driver will memory map this region in normal memory. Because + * the hermes registers are mapped in normal memory and not in ISA I/O + * post space, we can't use the usual inw/outw macros and we need to + * use readw/writew. + * This slight difference force us to compile our own version of + * hermes.c with the register access macro changed. That's a bit + * hackish but works fine. + * + * Note that the PCI region is pretty big (4K). That's much more than + * the usual set of hermes register (0x0 -> 0x3E). I've got a strong + * suspicion that the whole memory space of the adapter is in fact in + * this region. Accessing directly the adapter memory instead of going + * through the usual register would speed up significantely the + * operations... + * + * Finally, the card looks like this : +----------------------- + Bus 0, device 14, function 0: + Network controller: PCI device 1260:3873 (Harris Semiconductor) (rev 1). + IRQ 11. + Master Capable. Latency=248. + Prefetchable 32 bit memory at 0xffbcc000 [0xffbccfff]. +----------------------- +00:0e.0 Network controller: Harris Semiconductor: Unknown device 3873 (rev 01) + Subsystem: Unknown device 1737:3874 + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 248 set, cache line size 08 + Interrupt: pin A routed to IRQ 11 + Region 0: Memory at ffbcc000 (32-bit, prefetchable) [size=4K] + Capabilities: [dc] Power Management version 2 + Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME+ + Status: D0 PME-Enable- DSel=0 DScale=0 PME- +----------------------- + * + * That's all.. + * + * Jean II + */ + +#define DRIVER_NAME "orinoco_pci" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/fcntl.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +#include "hermes.h" +#include "orinoco.h" + +/* All the magic there is from wlan-ng */ +/* Magic offset of the reset register of the PCI card */ +#define HERMES_PCI_COR (0x26) +/* Magic bitmask to reset the card */ +#define HERMES_PCI_COR_MASK (0x0080) +/* Magic timeouts for doing the reset. + * Those times are straight from wlan-ng, and it is claimed that they + * are necessary. Alan will kill me. Take your time and grab a coffee. */ +#define HERMES_PCI_COR_ONT (250) /* ms */ +#define HERMES_PCI_COR_OFFT (500) /* ms */ +#define HERMES_PCI_COR_BUSYT (500) /* ms */ + +/* Orinoco PCI specific data */ +struct orinoco_pci_card { + void __iomem *pci_ioaddr; +}; + +/* + * Do a soft reset of the PCI card using the Configuration Option Register + * We need this to get going... + * This is the part of the code that is strongly inspired from wlan-ng + * + * Note : This code is done with irq enabled. This mean that many + * interrupts will occur while we are there. This is why we use the + * jiffies to regulate time instead of a straight mdelay(). Usually we + * need only around 245 iteration of the loop to do 250 ms delay. + * + * Note bis : Don't try to access HERMES_CMD during the reset phase. + * It just won't work ! + */ +static int +orinoco_pci_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + unsigned long timeout; + u16 reg; + + /* Assert the reset until the card notice */ + hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); + mdelay(HERMES_PCI_COR_ONT); + + /* Give time for the card to recover from this hard effort */ + hermes_write_regn(hw, PCI_COR, 0x0000); + mdelay(HERMES_PCI_COR_OFFT); + + /* The card is ready when it's no longer busy */ + timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +/* + * Initialise a card. Mostly similar to PLX code. + */ +static int orinoco_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err = 0; + unsigned long pci_iorange; + u16 __iomem *pci_ioaddr = NULL; + unsigned long pci_iolen; + struct orinoco_private *priv = NULL; + struct orinoco_pci_card *card; + struct net_device *dev = NULL; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + /* Resource 0 is mapped to the hermes registers */ + pci_iorange = pci_resource_start(pdev, 0); + pci_iolen = pci_resource_len(pdev, 0); + pci_ioaddr = ioremap(pci_iorange, pci_iolen); + if (!pci_iorange) { + printk(KERN_ERR PFX "Cannot remap hardware registers\n"); + goto fail_map; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset); + if (! dev) { + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->pci_ioaddr = pci_ioaddr; + dev->mem_start = pci_iorange; + dev->mem_end = pci_iorange + pci_iolen - 1; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, pci_ioaddr, HERMES_32BIT_REGSPACING); + + printk(KERN_DEBUG PFX "Detected device %s, mem:0x%lx-0x%lx, irq %d\n", + pci_name(pdev), dev->mem_start, dev->mem_end, pdev->irq); + + err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + dev->irq = pdev->irq; + + /* Perform a COR reset to start the card */ + err = orinoco_pci_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Failed to register net device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + iounmap(pci_ioaddr); + + fail_map: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pci_card *card = priv->card; + + unregister_netdev(dev); + free_irq(dev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + iounmap(card->pci_ioaddr); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static int orinoco_pci_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Orinoco-PCI entering sleep mode (state=%d)\n", + dev->name, state); + + err = orinoco_lock(priv, &flags); + if (err) { + printk(KERN_ERR "%s: hw_unavailable on orinoco_pci_suspend\n", + dev->name); + return err; + } + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: orinoco_pci_suspend(): Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + + priv->hw_unavailable++; + + orinoco_unlock(priv, &flags); + + pci_save_state(pdev); + pci_set_power_state(pdev, 3); + + return 0; +} + +static int orinoco_pci_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Orinoco-PCI waking up\n", dev->name); + + pci_set_power_state(pdev, 0); + pci_restore_state(pdev); + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware on orinoco_pci_resume()\n", + dev->name, err); + return err; + } + + spin_lock_irqsave(&priv->lock, flags); + + netif_device_attach(dev); + + priv->hw_unavailable--; + + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card on orinoco_pci_resume()\n", + dev->name, err); + } + + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static struct pci_device_id orinoco_pci_pci_id_table[] = { + /* Intersil Prism 3 */ + {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, + /* Intersil Prism 2.5 */ + {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, + /* Samsung MagicLAN SWL-2210P */ + {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_pci_pci_id_table); + +static struct pci_driver orinoco_pci_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_pci_pci_id_table, + .probe = orinoco_pci_init_one, + .remove = __devexit_p(orinoco_pci_remove_one), + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin <proski@gnu.org>," + " David Gibson <hermes@gibson.dropbear.id.au> &" + " Jean Tourrilhes <jt@hpl.hp.com>)"; +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_pci_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_module_init(&orinoco_pci_driver); +} + +static void __exit orinoco_pci_exit(void) +{ + pci_unregister_driver(&orinoco_pci_driver); +} + +module_init(orinoco_pci_init); +module_exit(orinoco_pci_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c new file mode 100644 index 00000000000..7ab05b89fb3 --- /dev/null +++ b/drivers/net/wireless/orinoco_plx.c @@ -0,0 +1,419 @@ +/* orinoco_plx.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a PLX9052. + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * Copyright (C) 2001 Daniel Barlow + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + + * Caution: this is experimental and probably buggy. For success and + * failure reports for different cards and adaptors, see + * orinoco_plx_pci_id_table near the end of the file. If you have a + * card we don't have the PCI id for, and looks like it should work, + * drop me mail with the id and "it works"/"it doesn't work". + * + * Note: if everything gets detected fine but it doesn't actually send + * or receive packets, your first port of call should probably be to + * try newer firmware in the card. Especially if you're doing Ad-Hoc + * modes. + * + * The actual driving is done by orinoco.c, this is just resource + * allocation stuff. The explanation below is courtesy of Ryan Niemi + * on the linux-wlan-ng list at + * http://archives.neohapsis.com/archives/dev/linux-wlan/2001-q1/0026.html + * + * The PLX9052-based cards (WL11000 and several others) are a + * different beast than the usual PCMCIA-based PRISM2 configuration + * expected by wlan-ng. Here's the general details on how the WL11000 + * PCI adapter works: + * + * - Two PCI I/O address spaces, one 0x80 long which contains the + * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA + * slot I/O address space. + * + * - One PCI memory address space, mapped to the PCMCIA memory space + * (containing the CIS). + * + * After identifying the I/O and memory space, you can read through + * the memory space to confirm the CIS's device ID or manufacturer ID + * to make sure it's the expected card. qKeep in mind that the PCMCIA + * spec specifies the CIS as the lower 8 bits of each word read from + * the CIS, so to read the bytes of the CIS, read every other byte + * (0,2,4,...). Passing that test, you need to enable the I/O address + * space on the PCMCIA card via the PCMCIA COR register. This is the + * first byte following the CIS. In my case (which may not have any + * relation to what's on the PRISM2 cards), COR was at offset 0x800 + * within the PCI memory space. Write 0x41 to the COR register to + * enable I/O mode and to select level triggered interrupts. To + * confirm you actually succeeded, read the COR register back and make + * sure it actually got set to 0x41, incase you have an unexpected + * card inserted. + * + * Following that, you can treat the second PCI I/O address space (the + * one that's not 0x80 in length) as the PCMCIA I/O space. + * + * Note that in the Eumitcom's source for their drivers, they register + * the interrupt as edge triggered when registering it with the + * Windows kernel. I don't recall how to register edge triggered on + * Linux (if it can be done at all). But in some experimentation, I + * don't see much operational difference between using either + * interrupt mode. Don't mess with the interrupt mode in the COR + * register though, as the PLX9052 wants level triggers with the way + * the serial EEPROM configures it on the WL11000. + * + * There's some other little quirks related to timing that I bumped + * into, but I don't recall right now. Also, there's two variants of + * the WL11000 I've seen, revision A1 and T2. These seem to differ + * slightly in the timings configured in the wait-state generator in + * the PLX9052. There have also been some comments from Eumitcom that + * cards shouldn't be hot swapped, apparently due to risk of cooking + * the PLX9052. I'm unsure why they believe this, as I can't see + * anything in the design that would really cause a problem, except + * for crashing drivers not written to expect it. And having developed + * drivers for the WL11000, I'd say it's quite tricky to write code + * that will successfully deal with a hot unplug. Very odd things + * happen on the I/O side of things. But anyway, be warned. Despite + * that, I've hot-swapped a number of times during debugging and + * driver development for various reasons (stuck WAIT# line after the + * radio card's firmware locks up). + * + * Hope this is enough info for someone to add PLX9052 support to the + * wlan-ng card. In the case of the WL11000, the PCI ID's are + * 0x1639/0x0200, with matching subsystem ID's. Other PLX9052-based + * manufacturers other than Eumitcom (or on cards other than the + * WL11000) may have different PCI ID's. + * + * If anyone needs any more specific info, let me know. I haven't had + * time to implement support myself yet, and with the way things are + * going, might not have time for a while.. + */ + +#define DRIVER_NAME "orinoco_plx" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/fcntl.h> + +#include <pcmcia/cisreg.h> + +#include "hermes.h" +#include "orinoco.h" + +#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define PLX_RESET_TIME (500) /* milliseconds */ + +#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ +#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */ + +static const u8 cis_magic[] = { + 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67 +}; + +/* Orinoco PLX specific data */ +struct orinoco_plx_card { + void __iomem *attr_mem; +}; + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_plx_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + struct orinoco_plx_card *card = priv->card; + u8 __iomem *attr_mem = card->attr_mem; + unsigned long timeout; + u16 reg; + + writeb(COR_VALUE | COR_RESET, attr_mem + COR_OFFSET); + mdelay(1); + + writeb(COR_VALUE, attr_mem + COR_OFFSET); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + (PLX_RESET_TIME * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Did we timeout ? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + + +static int orinoco_plx_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err = 0; + u8 __iomem *attr_mem = NULL; + u32 csr_reg, plx_addr; + struct orinoco_private *priv = NULL; + struct orinoco_plx_card *card; + unsigned long pccard_ioaddr = 0; + unsigned long pccard_iolen = 0; + struct net_device *dev = NULL; + void __iomem *mem; + int i; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + /* Resource 1 is mapped to PLX-specific registers */ + plx_addr = pci_resource_start(pdev, 1); + + /* Resource 2 is mapped to the PCMCIA attribute memory */ + attr_mem = ioremap(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + if (!attr_mem) { + printk(KERN_ERR PFX "Cannot remap PCMCIA space\n"); + goto fail_map_attr; + } + + /* Resource 3 is mapped to the PCMCIA I/O address space */ + pccard_ioaddr = pci_resource_start(pdev, 3); + pccard_iolen = pci_resource_len(pdev, 3); + + mem = pci_iomap(pdev, 3, 0); + if (!mem) { + err = -ENOMEM; + goto fail_map_io; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), orinoco_plx_cor_reset); + if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->attr_mem = attr_mem; + dev->base_addr = pccard_ioaddr; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING); + + printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 PLX device " + "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq, + pccard_ioaddr); + + err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + dev->irq = pdev->irq; + + /* bjoern: We need to tell the card to enable interrupts, in + case the serial eprom didn't do this already. See the + PLX9052 data book, p8-1 and 8-24 for reference. */ + csr_reg = inl(plx_addr + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + csr_reg |= PLX_INTCSR_INTEN; + outl(csr_reg, plx_addr + PLX_INTCSR); + csr_reg = inl(plx_addr + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + printk(KERN_ERR PFX "Cannot enable interrupts\n"); + goto fail; + } + } + + err = orinoco_plx_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + printk(KERN_DEBUG PFX "CIS: "); + for (i = 0; i < 16; i++) { + printk("%02X:", readb(attr_mem + 2*i)); + } + printk("\n"); + + /* Verify whether a supported PC card is present */ + /* FIXME: we probably need to be smarted about this */ + for (i = 0; i < sizeof(cis_magic); i++) { + if (cis_magic[i] != readb(attr_mem +2*i)) { + printk(KERN_ERR PFX "The CIS value of Prism2 PC " + "card is unexpected\n"); + err = -EIO; + goto fail; + } + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, mem); + + fail_map_io: + iounmap(attr_mem); + + fail_map_attr: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_plx_card *card = priv->card; + u8 __iomem *attr_mem = card->attr_mem; + + BUG_ON(! dev); + + unregister_netdev(dev); + free_irq(dev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + iounmap(attr_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + + +static struct pci_device_id orinoco_plx_pci_id_table[] = { + {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */ + {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */ + {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */ + {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W, + Eumitcom PCI WL11000, + Addtron AWA-100 */ + {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */ + {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */ + {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */ + {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */ + {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by + Brendan W. McAdams <rit AT jacked-in.org> */ + {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by + Damien Persohn <damien AT persohn.net> */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_plx_pci_id_table); + +static struct pci_driver orinoco_plx_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_plx_pci_id_table, + .probe = orinoco_plx_init_one, + .remove = __devexit_p(orinoco_plx_remove_one), +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin <proski@gnu.org>," + " David Gibson <hermes@gibson.dropbear.id.au>," + " Daniel Barlow <dan@telent.net>)"; +MODULE_AUTHOR("Daniel Barlow <dan@telent.net>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_plx_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_module_init(&orinoco_plx_driver); +} + +static void __exit orinoco_plx_exit(void) +{ + pci_unregister_driver(&orinoco_plx_driver); + ssleep(1); +} + +module_init(orinoco_plx_init); +module_exit(orinoco_plx_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c new file mode 100644 index 00000000000..85893f42445 --- /dev/null +++ b/drivers/net/wireless/orinoco_tmd.c @@ -0,0 +1,276 @@ +/* orinoco_tmd.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a TMD7160. + * + * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net> + * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + + * Caution: this is experimental and probably buggy. For success and + * failure reports for different cards and adaptors, see + * orinoco_tmd_pci_id_table near the end of the file. If you have a + * card we don't have the PCI id for, and looks like it should work, + * drop me mail with the id and "it works"/"it doesn't work". + * + * Note: if everything gets detected fine but it doesn't actually send + * or receive packets, your first port of call should probably be to + * try newer firmware in the card. Especially if you're doing Ad-Hoc + * modes + * + * The actual driving is done by orinoco.c, this is just resource + * allocation stuff. + * + * This driver is modeled after the orinoco_plx driver. The main + * difference is that the TMD chip has only IO port ranges and no + * memory space, i.e. no access to the CIS. Compared to the PLX chip, + * the io range functionalities are exchanged. + * + * Pheecom sells cards with the TMD chip as "ASIC version" + */ + +#define DRIVER_NAME "orinoco_tmd" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/fcntl.h> + +#include <pcmcia/cisreg.h> + +#include "hermes.h" +#include "orinoco.h" + +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define TMD_RESET_TIME (500) /* milliseconds */ + +/* Orinoco TMD specific data */ +struct orinoco_tmd_card { + u32 tmd_io; +}; + + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_tmd_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + struct orinoco_tmd_card *card = priv->card; + u32 addr = card->tmd_io; + unsigned long timeout; + u16 reg; + + outb(COR_VALUE | COR_RESET, addr); + mdelay(1); + + outb(COR_VALUE, addr); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + (TMD_RESET_TIME * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Did we timeout ? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + + +static int orinoco_tmd_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err = 0; + struct orinoco_private *priv = NULL; + struct orinoco_tmd_card *card; + struct net_device *dev = NULL; + void __iomem *mem; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + mem = pci_iomap(pdev, 2, 0); + if (! mem) { + err = -ENOMEM; + goto fail_iomap; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset); + if (! dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->tmd_io = pci_resource_start(pdev, 1); + dev->base_addr = pci_resource_start(pdev, 2); + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING); + + printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 TMD device " + "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq, + dev->base_addr); + + err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + dev->irq = pdev->irq; + + err = orinoco_tmd_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, mem); + + fail_iomap: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = dev->priv; + + BUG_ON(! dev); + + unregister_netdev(dev); + free_irq(dev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + + +static struct pci_device_id orinoco_tmd_pci_id_table[] = { + {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_tmd_pci_id_table); + +static struct pci_driver orinoco_tmd_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_tmd_pci_id_table, + .probe = orinoco_tmd_init_one, + .remove = __devexit_p(orinoco_tmd_remove_one), +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Joerg Dorchain <joerg@dorchain.net>)"; +MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_tmd_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_module_init(&orinoco_tmd_driver); +} + +static void __exit orinoco_tmd_exit(void) +{ + pci_unregister_driver(&orinoco_tmd_driver); + ssleep(1); +} + +module_init(orinoco_tmd_init); +module_exit(orinoco_tmd_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/prism54/Makefile b/drivers/net/wireless/prism54/Makefile new file mode 100644 index 00000000000..fad305c7673 --- /dev/null +++ b/drivers/net/wireless/prism54/Makefile @@ -0,0 +1,8 @@ +# $Id: Makefile.k26,v 1.7 2004/01/30 16:24:00 ajfa Exp $ + +prism54-objs := islpci_eth.o islpci_mgt.o \ + isl_38xx.o isl_ioctl.o islpci_dev.o \ + islpci_hotplug.o oid_mgt.o + +obj-$(CONFIG_PRISM54) += prism54.o + diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c new file mode 100644 index 00000000000..4481ec18c5a --- /dev/null +++ b/drivers/net/wireless/prism54/isl_38xx.c @@ -0,0 +1,260 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/delay.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" + +/****************************************************************************** + Device Interface & Control functions +******************************************************************************/ + +/** + * isl38xx_disable_interrupts - disable all interrupts + * @device: pci memory base address + * + * Instructs the device to disable all interrupt reporting by asserting + * the IRQ line. New events may still show up in the interrupt identification + * register located at offset %ISL38XX_INT_IDENT_REG. + */ +void +isl38xx_disable_interrupts(void __iomem *device) +{ + isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_handle_sleep_request(isl38xx_control_block *control_block, + int *powerstate, void __iomem *device_base) +{ + /* device requests to go into sleep mode + * check whether the transmit queues for data and management are empty */ + if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)) + /* data tx queue not empty */ + return; + + if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ)) + /* management tx queue not empty */ + return; + + /* check also whether received frames are pending */ + if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ)) + /* data rx queue not empty */ + return; + + if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ)) + /* management rx queue not empty */ + return; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Device going to sleep mode\n"); +#endif + + /* all queues are empty, allow the device to go into sleep mode */ + *powerstate = ISL38XX_PSM_POWERSAVE_STATE; + + /* assert the Sleep interrupt in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_handle_wakeup(isl38xx_control_block *control_block, + int *powerstate, void __iomem *device_base) +{ + /* device is in active state, update the powerstate flag */ + *powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* now check whether there are frames pending for the card */ + if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ) + && !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ)) + return; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n"); +#endif + + /* either data or management transmit queue has a frame pending + * trigger the device by setting the Update bit in the Device Int reg */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_trigger_device(int asleep, void __iomem *device_base) +{ + struct timeval current_time; + u32 reg, counter = 0; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n"); +#endif + + /* check whether the device is in power save mode */ + if (asleep) { + /* device is in powersave, trigger the device for wakeup */ +#if VERBOSE > SHOW_ERROR_MESSAGES + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n", + current_time.tv_sec, (long)current_time.tv_usec); +#endif + + DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", + current_time.tv_sec, (long)current_time.tv_usec, + readl(device_base + ISL38XX_CTRL_STAT_REG)); + udelay(ISL38XX_WRITEIO_DELAY); + + reg = readl(device_base + ISL38XX_INT_IDENT_REG); + if (reg == 0xabadface) { +#if VERBOSE > SHOW_ERROR_MESSAGES + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, + "%08li.%08li Device register abadface\n", + current_time.tv_sec, (long)current_time.tv_usec); +#endif + /* read the Device Status Register until Sleepmode bit is set */ + while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG), + (reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) { + udelay(ISL38XX_WRITEIO_DELAY); + counter++; + } + + DEBUG(SHOW_TRACING, + "%08li.%08li Device register read %08x\n", + current_time.tv_sec, (long)current_time.tv_usec, + readl(device_base + ISL38XX_CTRL_STAT_REG)); + udelay(ISL38XX_WRITEIO_DELAY); + +#if VERBOSE > SHOW_ERROR_MESSAGES + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, + "%08li.%08li Device asleep counter %i\n", + current_time.tv_sec, (long)current_time.tv_usec, + counter); +#endif + } + /* assert the Wakeup interrupt in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* perform another read on the Device Status Register */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + +#if VERBOSE > SHOW_ERROR_MESSAGES + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", + current_time.tv_sec, (long)current_time.tv_usec, reg); +#endif + } else { + /* device is (still) awake */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Device is in active state\n"); +#endif + /* trigger the device by setting the Update bit in the Device Int reg */ + + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + } +} + +void +isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address) +{ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n"); +#endif + + /* load the address of the control block in the device */ + isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the reset bit in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* enable the interrupt for detecting initialization */ + + /* Note: Do not enable other interrupts here. We want the + * device to have come up first 100% before allowing any other + * interrupts. */ + isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */ +} + +void +isl38xx_enable_common_interrupts(void __iomem *device_base) { + u32 reg; + reg = ( ISL38XX_INT_IDENT_UPDATE | + ISL38XX_INT_IDENT_SLEEP | ISL38XX_INT_IDENT_WAKEUP); + isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +int +isl38xx_in_queue(isl38xx_control_block *cb, int queue) +{ + const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) - + le32_to_cpu(cb->device_curr_frag[queue])); + + /* determine the amount of fragments in the queue depending on the type + * of the queue, either transmit or receive */ + + BUG_ON(delta < 0); /* driver ptr must be ahead of device ptr */ + + switch (queue) { + /* send queues */ + case ISL38XX_CB_TX_MGMTQ: + BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + case ISL38XX_CB_TX_DATA_LQ: + case ISL38XX_CB_TX_DATA_HQ: + BUG_ON(delta > ISL38XX_CB_TX_QSIZE); + return delta; + break; + + /* receive queues */ + case ISL38XX_CB_RX_MGMTQ: + BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + return ISL38XX_CB_MGMT_QSIZE - delta; + break; + + case ISL38XX_CB_RX_DATA_LQ: + case ISL38XX_CB_RX_DATA_HQ: + BUG_ON(delta > ISL38XX_CB_RX_QSIZE); + return ISL38XX_CB_RX_QSIZE - delta; + break; + } + BUG(); + return 0; +} diff --git a/drivers/net/wireless/prism54/isl_38xx.h b/drivers/net/wireless/prism54/isl_38xx.h new file mode 100644 index 00000000000..e83e4912ab6 --- /dev/null +++ b/drivers/net/wireless/prism54/isl_38xx.h @@ -0,0 +1,173 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ISL_38XX_H +#define _ISL_38XX_H + +#include <linux/version.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#define ISL38XX_CB_RX_QSIZE 8 +#define ISL38XX_CB_TX_QSIZE 32 + +/* ISL38XX Access Point Specific definitions */ +#define ISL38XX_MAX_WDS_LINKS 8 + +/* ISL38xx Client Specific definitions */ +#define ISL38XX_PSM_ACTIVE_STATE 0 +#define ISL38XX_PSM_POWERSAVE_STATE 1 + +/* ISL38XX Host Interface Definitions */ +#define ISL38XX_PCI_MEM_SIZE 0x02000 +#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000 +#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000 +#define ISL38XX_WRITEIO_DELAY 10 /* in us */ +#define ISL38XX_RESET_DELAY 50 /* in ms */ +#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */ +#define ISL38XX_MAX_WAIT_CYCLES 10 + +/* PCI Memory Area */ +#define ISL38XX_HARDWARE_REG 0x0000 +#define ISL38XX_CARDBUS_CIS 0x0800 +#define ISL38XX_DIRECT_MEM_WIN 0x1000 + +/* Hardware registers */ +#define ISL38XX_DEV_INT_REG 0x0000 +#define ISL38XX_INT_IDENT_REG 0x0010 +#define ISL38XX_INT_ACK_REG 0x0014 +#define ISL38XX_INT_EN_REG 0x0018 +#define ISL38XX_GEN_PURP_COM_REG_1 0x0020 +#define ISL38XX_GEN_PURP_COM_REG_2 0x0024 +#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1 +#define ISL38XX_DIR_MEM_BASE_REG 0x0030 +#define ISL38XX_CTRL_STAT_REG 0x0078 + +/* High end mobos queue up pci writes, the following + * is used to "read" from after a write to force flush */ +#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG + +/** + * isl38xx_w32_flush - PCI iomem write helper + * @base: (host) memory base address of the device + * @val: 32bit value (host order) to write + * @offset: byte offset into @base to write value to + * + * This helper takes care of writing a 32bit datum to the + * specified offset into the device's pci memory space, and making sure + * the pci memory buffers get flushed by performing one harmless read + * from the %ISL38XX_PCI_POSTING_FLUSH offset. + */ +static inline void +isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset) +{ + writel(val, base + offset); + (void) readl(base + ISL38XX_PCI_POSTING_FLUSH); +} + +/* Device Interrupt register bits */ +#define ISL38XX_DEV_INT_RESET 0x0001 +#define ISL38XX_DEV_INT_UPDATE 0x0002 +#define ISL38XX_DEV_INT_WAKEUP 0x0008 +#define ISL38XX_DEV_INT_SLEEP 0x0010 + +/* Interrupt Identification/Acknowledge/Enable register bits */ +#define ISL38XX_INT_IDENT_UPDATE 0x0002 +#define ISL38XX_INT_IDENT_INIT 0x0004 +#define ISL38XX_INT_IDENT_WAKEUP 0x0008 +#define ISL38XX_INT_IDENT_SLEEP 0x0010 +#define ISL38XX_INT_SOURCES 0x001E + +/* Control/Status register bits */ +/* Looks like there are other meaningful bits + 0x20004400 seen in normal operation, + 0x200044db at 'timeout waiting for mgmt response' +*/ +#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 +#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 +#define ISL38XX_CTRL_STAT_RESET 0x10000000 +#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 +#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 +#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 + +/* Control Block definitions */ +#define ISL38XX_CB_RX_DATA_LQ 0 +#define ISL38XX_CB_TX_DATA_LQ 1 +#define ISL38XX_CB_RX_DATA_HQ 2 +#define ISL38XX_CB_TX_DATA_HQ 3 +#define ISL38XX_CB_RX_MGMTQ 4 +#define ISL38XX_CB_TX_MGMTQ 5 +#define ISL38XX_CB_QCOUNT 6 +#define ISL38XX_CB_MGMT_QSIZE 4 +#define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */ + +/* Memory Manager definitions */ +#define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */ +#define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */ +#define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */ +#define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT) +#define CONTROL_BLOCK_SIZE 1024 /* should be enough */ +#define PSM_FRAME_SIZE 1536 +#define PSM_MINIMAL_STATION_COUNT 64 +#define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT +#define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT +#define MAX_TRAP_RX_QUEUE 4 +#define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE + +/* Fragment package definitions */ +#define FRAGMENT_FLAG_MF 0x0001 +#define MAX_FRAGMENT_SIZE 1536 + +/* In monitor mode frames have a header. I don't know exactly how big those + * frame can be but I've never seen any frame bigger than 1584... : + */ +#define MAX_FRAGMENT_SIZE_RX 1600 + +typedef struct { + u32 address; /* physical address on host */ + u16 size; /* packet size */ + u16 flags; /* set of bit-wise flags */ +} isl38xx_fragment; + +struct isl38xx_cb { + u32 driver_curr_frag[ISL38XX_CB_QCOUNT]; + u32 device_curr_frag[ISL38XX_CB_QCOUNT]; + isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE]; + isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE]; + isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE]; + isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE]; + isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE]; + isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE]; +}; + +typedef struct isl38xx_cb isl38xx_control_block; + +/* determine number of entries currently in queue */ +int isl38xx_in_queue(isl38xx_control_block *cb, int queue); + +void isl38xx_disable_interrupts(void __iomem *); +void isl38xx_enable_common_interrupts(void __iomem *); + +void isl38xx_handle_sleep_request(isl38xx_control_block *, int *, + void __iomem *); +void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *); +void isl38xx_trigger_device(int, void __iomem *); +void isl38xx_interface_reset(void __iomem *, dma_addr_t); + +#endif /* _ISL_38XX_H */ diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c new file mode 100644 index 00000000000..0f29a9c7bc2 --- /dev/null +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -0,0 +1,2750 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * (C) 2003,2004 Aurelien Alleaume <slts@free.fr> + * (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/if_arp.h> +#include <linux/pci.h> + +#include <asm/uaccess.h> + +#include "prismcompat.h" +#include "isl_ioctl.h" +#include "islpci_mgt.h" +#include "isl_oid.h" /* additional types and defs for isl38xx fw */ +#include "oid_mgt.h" + +#include <net/iw_handler.h> /* New driver API */ + + +static void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid, + u8 *wpa_ie, size_t wpa_ie_len); +static size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie); +static int prism54_set_wpa(struct net_device *, struct iw_request_info *, + __u32 *, char *); + + +/** + * prism54_mib_mode_helper - MIB change mode helper function + * @mib: the &struct islpci_mib object to modify + * @iw_mode: new mode (%IW_MODE_*) + * + * This is a helper function, hence it does not lock. Make sure + * caller deals with locking *if* necessary. This function sets the + * mode-dependent mib values and does the mapping of the Linux + * Wireless API modes to Device firmware modes. It also checks for + * correct valid Linux wireless modes. + */ +static int +prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) +{ + u32 config = INL_CONFIG_MANUALRUN; + u32 mode, bsstype; + + /* For now, just catch early the Repeater and Secondary modes here */ + if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) { + printk(KERN_DEBUG + "%s(): Sorry, Repeater mode and Secondary mode " + "are not yet supported by this driver.\n", __FUNCTION__); + return -EINVAL; + } + + priv->iw_mode = iw_mode; + + switch (iw_mode) { + case IW_MODE_AUTO: + mode = INL_MODE_CLIENT; + bsstype = DOT11_BSSTYPE_ANY; + break; + case IW_MODE_ADHOC: + mode = INL_MODE_CLIENT; + bsstype = DOT11_BSSTYPE_IBSS; + break; + case IW_MODE_INFRA: + mode = INL_MODE_CLIENT; + bsstype = DOT11_BSSTYPE_INFRA; + break; + case IW_MODE_MASTER: + mode = INL_MODE_AP; + bsstype = DOT11_BSSTYPE_INFRA; + break; + case IW_MODE_MONITOR: + mode = INL_MODE_PROMISCUOUS; + bsstype = DOT11_BSSTYPE_ANY; + config |= INL_CONFIG_RXANNEX; + break; + default: + return -EINVAL; + } + + if (init_wds) + config |= INL_CONFIG_WDS; + mgt_set(priv, DOT11_OID_BSSTYPE, &bsstype); + mgt_set(priv, OID_INL_CONFIG, &config); + mgt_set(priv, OID_INL_MODE, &mode); + + return 0; +} + +/** + * prism54_mib_init - fill MIB cache with defaults + * + * this function initializes the struct given as @mib with defaults, + * of which many are retrieved from the global module parameter + * variables. + */ + +void +prism54_mib_init(islpci_private *priv) +{ + u32 channel, authen, wep, filter, dot1x, mlme, conformance, power, mode; + struct obj_buffer psm_buffer = { + .size = PSM_BUFFER_SIZE, + .addr = priv->device_psm_buffer + }; + + channel = CARD_DEFAULT_CHANNEL; + authen = CARD_DEFAULT_AUTHEN; + wep = CARD_DEFAULT_WEP; + filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */ + dot1x = CARD_DEFAULT_DOT1X; + mlme = CARD_DEFAULT_MLME_MODE; + conformance = CARD_DEFAULT_CONFORMANCE; + power = 127; + mode = CARD_DEFAULT_IW_MODE; + + mgt_set(priv, DOT11_OID_CHANNEL, &channel); + mgt_set(priv, DOT11_OID_AUTHENABLE, &authen); + mgt_set(priv, DOT11_OID_PRIVACYINVOKED, &wep); + mgt_set(priv, DOT11_OID_PSMBUFFER, &psm_buffer); + mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &filter); + mgt_set(priv, DOT11_OID_DOT1XENABLE, &dot1x); + mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlme); + mgt_set(priv, OID_INL_DOT11D_CONFORMANCE, &conformance); + mgt_set(priv, OID_INL_OUTPUTPOWER, &power); + + /* This sets all of the mode-dependent values */ + prism54_mib_mode_helper(priv, mode); +} + +/* this will be executed outside of atomic context thanks to + * schedule_work(), thus we can as well use sleeping semaphore + * locking */ +void +prism54_update_stats(islpci_private *priv) +{ + char *data; + int j; + struct obj_bss bss, *bss2; + union oid_res_t r; + + if (down_interruptible(&priv->stats_sem)) + return; + +/* Noise floor. + * I'm not sure if the unit is dBm. + * Note : If we are not connected, this value seems to be irrelevant. */ + + mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); + priv->local_iwstatistics.qual.noise = r.u; + +/* Get the rssi of the link. To do this we need to retrieve a bss. */ + + /* First get the MAC address of the AP we are associated with. */ + mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r); + data = r.ptr; + + /* copy this MAC to the bss */ + memcpy(bss.address, data, 6); + kfree(data); + + /* now ask for the corresponding bss */ + j = mgt_get_request(priv, DOT11_OID_BSSFIND, 0, (void *) &bss, &r); + bss2 = r.ptr; + /* report the rssi and use it to calculate + * link quality through a signal-noise + * ratio */ + priv->local_iwstatistics.qual.level = bss2->rssi; + priv->local_iwstatistics.qual.qual = + bss2->rssi - priv->iwstatistics.qual.noise; + + kfree(bss2); + + /* report that the stats are new */ + priv->local_iwstatistics.qual.updated = 0x7; + +/* Rx : unable to decrypt the MPDU */ + mgt_get_request(priv, DOT11_OID_PRIVRXFAILED, 0, NULL, &r); + priv->local_iwstatistics.discard.code = r.u; + +/* Tx : Max MAC retries num reached */ + mgt_get_request(priv, DOT11_OID_MPDUTXFAILED, 0, NULL, &r); + priv->local_iwstatistics.discard.retries = r.u; + + up(&priv->stats_sem); + + return; +} + +struct iw_statistics * +prism54_get_wireless_stats(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + + /* If the stats are being updated return old data */ + if (down_trylock(&priv->stats_sem) == 0) { + memcpy(&priv->iwstatistics, &priv->local_iwstatistics, + sizeof (struct iw_statistics)); + /* They won't be marked updated for the next time */ + priv->local_iwstatistics.qual.updated = 0; + up(&priv->stats_sem); + } else + priv->iwstatistics.qual.updated = 0; + + /* Update our wireless stats, but do not schedule to often + * (max 1 HZ) */ + if ((priv->stats_timestamp == 0) || + time_after(jiffies, priv->stats_timestamp + 1 * HZ)) { + schedule_work(&priv->stats_work); + priv->stats_timestamp = jiffies; + } + + return &priv->iwstatistics; +} + +static int +prism54_commit(struct net_device *ndev, struct iw_request_info *info, + char *cwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + /* simply re-set the last set SSID, this should commit most stuff */ + + /* Commit in Monitor mode is not necessary, also setting essid + * in Monitor mode does not make sense and isn't allowed for this + * device's firmware */ + if (priv->iw_mode != IW_MODE_MONITOR) + return mgt_set_request(priv, DOT11_OID_SSID, 0, NULL); + return 0; +} + +static int +prism54_get_name(struct net_device *ndev, struct iw_request_info *info, + char *cwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + char *capabilities; + union oid_res_t r; + int rvalue; + + if (islpci_get_state(priv) < PRV_STATE_INIT) { + strncpy(cwrq, "NOT READY!", IFNAMSIZ); + return 0; + } + rvalue = mgt_get_request(priv, OID_INL_PHYCAPABILITIES, 0, NULL, &r); + + switch (r.u) { + case INL_PHYCAP_5000MHZ: + capabilities = "IEEE 802.11a/b/g"; + break; + case INL_PHYCAP_FAA: + capabilities = "IEEE 802.11b/g - FAA Support"; + break; + case INL_PHYCAP_2400MHZ: + default: + capabilities = "IEEE 802.11b/g"; /* Default */ + break; + } + strncpy(cwrq, capabilities, IFNAMSIZ); + return rvalue; +} + +static int +prism54_set_freq(struct net_device *ndev, struct iw_request_info *info, + struct iw_freq *fwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int rvalue; + u32 c; + + if (fwrq->m < 1000) + /* we have a channel number */ + c = fwrq->m; + else + c = (fwrq->e == 1) ? channel_of_freq(fwrq->m / 100000) : 0; + + rvalue = c ? mgt_set_request(priv, DOT11_OID_CHANNEL, 0, &c) : -EINVAL; + + /* Call commit handler */ + return (rvalue ? rvalue : -EINPROGRESS); +} + +static int +prism54_get_freq(struct net_device *ndev, struct iw_request_info *info, + struct iw_freq *fwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_CHANNEL, 0, NULL, &r); + fwrq->i = r.u; + rvalue |= mgt_get_request(priv, DOT11_OID_FREQUENCY, 0, NULL, &r); + fwrq->m = r.u; + fwrq->e = 3; + + return rvalue; +} + +static int +prism54_set_mode(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 mlmeautolevel = CARD_DEFAULT_MLME_MODE; + + /* Let's see if the user passed a valid Linux Wireless mode */ + if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) { + printk(KERN_DEBUG + "%s: %s() You passed a non-valid init_mode.\n", + priv->ndev->name, __FUNCTION__); + return -EINVAL; + } + + down_write(&priv->mib_sem); + + if (prism54_mib_mode_helper(priv, *uwrq)) { + up_write(&priv->mib_sem); + return -EOPNOTSUPP; + } + + /* the ACL code needs an intermediate mlmeautolevel. The wpa stuff an + * extended one. + */ + if ((*uwrq == IW_MODE_MASTER) && (priv->acl.policy != MAC_POLICY_OPEN)) + mlmeautolevel = DOT11_MLME_INTERMEDIATE; + if (priv->wpa) + mlmeautolevel = DOT11_MLME_EXTENDED; + + mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel); + + if (mgt_commit(priv)) { + up_write(&priv->mib_sem); + return -EIO; + } + priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) + ? priv->monitor_type : ARPHRD_ETHER; + up_write(&priv->mib_sem); + + return 0; +} + +/* Use mib cache */ +static int +prism54_get_mode(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + BUG_ON((priv->iw_mode < IW_MODE_AUTO) || (priv->iw_mode > + IW_MODE_MONITOR)); + *uwrq = priv->iw_mode; + + return 0; +} + +/* we use DOT11_OID_EDTHRESHOLD. From what I guess the card will not try to + * emit data if (sensitivity > rssi - noise) (in dBm). + * prism54_set_sens does not seem to work. + */ + +static int +prism54_set_sens(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 sens; + + /* by default the card sets this to 20. */ + sens = vwrq->disabled ? 20 : vwrq->value; + + return mgt_set_request(priv, DOT11_OID_EDTHRESHOLD, 0, &sens); +} + +static int +prism54_get_sens(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_EDTHRESHOLD, 0, NULL, &r); + + vwrq->value = r.u; + vwrq->disabled = (vwrq->value == 0); + vwrq->fixed = 1; + + return rvalue; +} + +static int +prism54_get_range(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + struct iw_range *range = (struct iw_range *) extra; + islpci_private *priv = netdev_priv(ndev); + u8 *data; + int i, m, rvalue; + struct obj_frequencies *freq; + union oid_res_t r; + + memset(range, 0, sizeof (struct iw_range)); + dwrq->length = sizeof (struct iw_range); + + /* set the wireless extension version number */ + range->we_version_source = SUPPORTED_WIRELESS_EXT; + range->we_version_compiled = WIRELESS_EXT; + + /* Now the encoding capabilities */ + range->num_encoding_sizes = 3; + /* 64(40) bits WEP */ + range->encoding_size[0] = 5; + /* 128(104) bits WEP */ + range->encoding_size[1] = 13; + /* 256 bits for WPA-PSK */ + range->encoding_size[2] = 32; + /* 4 keys are allowed */ + range->max_encoding_tokens = 4; + + /* we don't know the quality range... */ + range->max_qual.level = 0; + range->max_qual.noise = 0; + range->max_qual.qual = 0; + /* these value describe an average quality. Needs more tweaking... */ + range->avg_qual.level = -80; /* -80 dBm */ + range->avg_qual.noise = 0; /* don't know what to put here */ + range->avg_qual.qual = 0; + + range->sensitivity = 200; + + /* retry limit capabilities */ + range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = IW_RETRY_LIFETIME; + + /* I don't know the range. Put stupid things here */ + range->min_retry = 1; + range->max_retry = 65535; + range->min_r_time = 1024; + range->max_r_time = 65535 * 1024; + + /* txpower is supported in dBm's */ + range->txpower_capa = IW_TXPOW_DBM; + +#if WIRELESS_EXT > 16 + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_K_0 | + IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | + IW_EVENT_CAPA_MASK(SIOCGIWAP)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM); +#endif /* WIRELESS_EXT > 16 */ + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + /* Request the device for the supported frequencies + * not really relevant since some devices will report the 5 GHz band + * frequencies even if they don't support them. + */ + rvalue = + mgt_get_request(priv, DOT11_OID_SUPPORTEDFREQUENCIES, 0, NULL, &r); + freq = r.ptr; + + range->num_channels = freq->nr; + range->num_frequency = freq->nr; + + m = min(IW_MAX_FREQUENCIES, (int) freq->nr); + for (i = 0; i < m; i++) { + range->freq[i].m = freq->mhz[i]; + range->freq[i].e = 6; + range->freq[i].i = channel_of_freq(freq->mhz[i]); + } + kfree(freq); + + rvalue |= mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r); + data = r.ptr; + + /* We got an array of char. It is NULL terminated. */ + i = 0; + while ((i < IW_MAX_BITRATES) && (*data != 0)) { + /* the result must be in bps. The card gives us 500Kbps */ + range->bitrate[i] = *data * 500000; + i++; + data++; + } + range->num_bitrates = i; + kfree(r.ptr); + + return rvalue; +} + +/* Set AP address*/ + +static int +prism54_set_wap(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + char bssid[6]; + int rvalue; + + if (awrq->sa_family != ARPHRD_ETHER) + return -EINVAL; + + /* prepare the structure for the set object */ + memcpy(&bssid[0], awrq->sa_data, 6); + + /* set the bssid -- does this make sense when in AP mode? */ + rvalue = mgt_set_request(priv, DOT11_OID_BSSID, 0, &bssid); + + return (rvalue ? rvalue : -EINPROGRESS); /* Call commit handler */ +} + +/* get AP address*/ + +static int +prism54_get_wap(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r); + memcpy(awrq->sa_data, r.ptr, 6); + awrq->sa_family = ARPHRD_ETHER; + kfree(r.ptr); + + return rvalue; +} + +static int +prism54_set_scan(struct net_device *dev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + /* hehe the device does this automagicaly */ + return 0; +} + +/* a little helper that will translate our data into a card independent + * format that the Wireless Tools will understand. This was inspired by + * the "Aironet driver for 4500 and 4800 series cards" (GPL) + */ + +static char * +prism54_translate_bss(struct net_device *ndev, char *current_ev, + char *end_buf, struct obj_bss *bss, char noise) +{ + struct iw_event iwe; /* Temporary buffer */ + short cap; + islpci_private *priv = netdev_priv(ndev); + + /* The first entry must be the MAC address */ + memcpy(iwe.u.ap_addr.sa_data, bss->address, 6); + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + iwe.cmd = SIOCGIWAP; + current_ev = + iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + + /* The following entries will be displayed in the same order we give them */ + + /* The ESSID. */ + iwe.u.data.length = bss->ssid.length; + iwe.u.data.flags = 1; + iwe.cmd = SIOCGIWESSID; + current_ev = iwe_stream_add_point(current_ev, end_buf, + &iwe, bss->ssid.octets); + + /* Capabilities */ +#define CAP_ESS 0x01 +#define CAP_IBSS 0x02 +#define CAP_CRYPT 0x10 + + /* Mode */ + cap = bss->capinfo; + iwe.u.mode = 0; + if (cap & CAP_ESS) + iwe.u.mode = IW_MODE_MASTER; + else if (cap & CAP_IBSS) + iwe.u.mode = IW_MODE_ADHOC; + iwe.cmd = SIOCGIWMODE; + if (iwe.u.mode) + current_ev = + iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_UINT_LEN); + + /* Encryption capability */ + if (cap & CAP_CRYPT) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + iwe.cmd = SIOCGIWENCODE; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL); + + /* Add frequency. (short) bss->channel is the frequency in MHz */ + iwe.u.freq.m = bss->channel; + iwe.u.freq.e = 6; + iwe.cmd = SIOCGIWFREQ; + current_ev = + iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); + + /* Add quality statistics */ + iwe.u.qual.level = bss->rssi; + iwe.u.qual.noise = noise; + /* do a simple SNR for quality */ + iwe.u.qual.qual = bss->rssi - noise; + iwe.cmd = IWEVQUAL; + current_ev = + iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + + if (priv->wpa) { + u8 wpa_ie[MAX_WPA_IE_LEN]; + char *buf, *p; + size_t wpa_ie_len; + int i; + + wpa_ie_len = prism54_wpa_ie_get(priv, bss->address, wpa_ie); + if (wpa_ie_len > 0 && + (buf = kmalloc(wpa_ie_len * 2 + 10, GFP_ATOMIC))) { + p = buf; + p += sprintf(p, "wpa_ie="); + for (i = 0; i < wpa_ie_len; i++) { + p += sprintf(p, "%02x", wpa_ie[i]); + } + memset(&iwe, 0, sizeof (iwe)); + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(current_ev, end_buf, + &iwe, buf); + kfree(buf); + } + } + return current_ev; +} + +static int +prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int i, rvalue; + struct obj_bsslist *bsslist; + u32 noise = 0; + char *current_ev = extra; + union oid_res_t r; + + if (islpci_get_state(priv) < PRV_STATE_INIT) { + /* device is not ready, fail gently */ + dwrq->length = 0; + return 0; + } + + /* first get the noise value. We will use it to report the link quality */ + rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); + noise = r.u; + + /* Ask the device for a list of known bss. + * The old API, using SIOCGIWAPLIST, had a hard limit of IW_MAX_AP=64. + * The new API, using SIOCGIWSCAN, is only limited by the buffer size. + * WE-14->WE-16, the buffer is limited to IW_SCAN_MAX_DATA bytes. + * Starting with WE-17, the buffer can be as big as needed. + * But the device won't repport anything if you change the value + * of IWMAX_BSS=24. */ + + rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); + bsslist = r.ptr; + + /* ok now, scan the list and translate its info */ + for (i = 0; i < (int) bsslist->nr; i++) { + current_ev = prism54_translate_bss(ndev, current_ev, + extra + dwrq->length, + &(bsslist->bsslist[i]), + noise); +#if WIRELESS_EXT > 16 + /* Check if there is space for one more entry */ + if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + rvalue = -E2BIG; + break; + } +#endif /* WIRELESS_EXT > 16 */ + } + + kfree(bsslist); + dwrq->length = (current_ev - extra); + dwrq->flags = 0; /* todo */ + + return rvalue; +} + +static int +prism54_set_essid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct obj_ssid essid; + + memset(essid.octets, 0, 33); + + /* Check if we were asked for `any' */ + if (dwrq->flags && dwrq->length) { + if (dwrq->length > min(33, IW_ESSID_MAX_SIZE + 1)) + return -E2BIG; + essid.length = dwrq->length - 1; + memcpy(essid.octets, extra, dwrq->length); + } else + essid.length = 0; + + if (priv->iw_mode != IW_MODE_MONITOR) + return mgt_set_request(priv, DOT11_OID_SSID, 0, &essid); + + /* If in monitor mode, just save to mib */ + mgt_set(priv, DOT11_OID_SSID, &essid); + return 0; + +} + +static int +prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct obj_ssid *essid; + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_SSID, 0, NULL, &r); + essid = r.ptr; + + if (essid->length) { + dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */ + /* if it is to big, trunk it */ + dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length + 1); + } else { + dwrq->flags = 0; + dwrq->length = 0; + } + essid->octets[essid->length] = '\0'; + memcpy(extra, essid->octets, dwrq->length); + kfree(essid); + + return rvalue; +} + +/* Provides no functionality, just completes the ioctl. In essence this is a + * just a cosmetic ioctl. + */ +static int +prism54_set_nick(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + if (dwrq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + down_write(&priv->mib_sem); + memset(priv->nickname, 0, sizeof (priv->nickname)); + memcpy(priv->nickname, extra, dwrq->length); + up_write(&priv->mib_sem); + + return 0; +} + +static int +prism54_get_nick(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + dwrq->length = 0; + + down_read(&priv->mib_sem); + dwrq->length = strlen(priv->nickname) + 1; + memcpy(extra, priv->nickname, dwrq->length); + up_read(&priv->mib_sem); + + return 0; +} + +/* Set the allowed Bitrates */ + +static int +prism54_set_rate(struct net_device *ndev, + struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + + islpci_private *priv = netdev_priv(ndev); + u32 rate, profile; + char *data; + int ret, i; + union oid_res_t r; + + if (vwrq->value == -1) { + /* auto mode. No limit. */ + profile = 1; + return mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile); + } + + ret = mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r); + if (ret) { + kfree(r.ptr); + return ret; + } + + rate = (u32) (vwrq->value / 500000); + data = r.ptr; + i = 0; + + while (data[i]) { + if (rate && (data[i] == rate)) { + break; + } + if (vwrq->value == i) { + break; + } + data[i] |= 0x80; + i++; + } + + if (!data[i]) { + kfree(r.ptr); + return -EINVAL; + } + + data[i] |= 0x80; + data[i + 1] = 0; + + /* Now, check if we want a fixed or auto value */ + if (vwrq->fixed) { + data[0] = data[i]; + data[1] = 0; + } + +/* + i = 0; + printk("prism54 rate: "); + while(data[i]) { + printk("%u ", data[i]); + i++; + } + printk("0\n"); +*/ + profile = -1; + ret = mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile); + ret |= mgt_set_request(priv, DOT11_OID_EXTENDEDRATES, 0, data); + ret |= mgt_set_request(priv, DOT11_OID_RATES, 0, data); + + kfree(r.ptr); + + return ret; +} + +/* Get the current bit rate */ +static int +prism54_get_rate(struct net_device *ndev, + struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int rvalue; + char *data; + union oid_res_t r; + + /* Get the current bit rate */ + if ((rvalue = mgt_get_request(priv, GEN_OID_LINKSTATE, 0, NULL, &r))) + return rvalue; + vwrq->value = r.u * 500000; + + /* request the device for the enabled rates */ + rvalue = mgt_get_request(priv, DOT11_OID_RATES, 0, NULL, &r); + if (rvalue) { + kfree(r.ptr); + return rvalue; + } + data = r.ptr; + vwrq->fixed = (data[0] != 0) && (data[1] == 0); + kfree(r.ptr); + + return 0; +} + +static int +prism54_set_rts(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + return mgt_set_request(priv, DOT11_OID_RTSTHRESH, 0, &vwrq->value); +} + +static int +prism54_get_rts(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + /* get the rts threshold */ + rvalue = mgt_get_request(priv, DOT11_OID_RTSTHRESH, 0, NULL, &r); + vwrq->value = r.u; + + return rvalue; +} + +static int +prism54_set_frag(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + return mgt_set_request(priv, DOT11_OID_FRAGTHRESH, 0, &vwrq->value); +} + +static int +prism54_get_frag(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_FRAGTHRESH, 0, NULL, &r); + vwrq->value = r.u; + + return rvalue; +} + +/* Here we have (min,max) = max retries for (small frames, big frames). Where + * big frame <=> bigger than the rts threshold + * small frame <=> smaller than the rts threshold + * This is not really the behavior expected by the wireless tool but it seems + * to be a common behavior in other drivers. + */ + +static int +prism54_set_retry(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 slimit = 0, llimit = 0; /* short and long limit */ + u32 lifetime = 0; + int rvalue = 0; + + if (vwrq->disabled) + /* we cannot disable this feature */ + return -EINVAL; + + if (vwrq->flags & IW_RETRY_LIMIT) { + if (vwrq->flags & IW_RETRY_MIN) + slimit = vwrq->value; + else if (vwrq->flags & IW_RETRY_MAX) + llimit = vwrq->value; + else { + /* we are asked to set both */ + slimit = vwrq->value; + llimit = vwrq->value; + } + } + if (vwrq->flags & IW_RETRY_LIFETIME) + /* Wireless tools use us unit while the device uses 1024 us unit */ + lifetime = vwrq->value / 1024; + + /* now set what is requested */ + if (slimit) + rvalue = + mgt_set_request(priv, DOT11_OID_SHORTRETRIES, 0, &slimit); + if (llimit) + rvalue |= + mgt_set_request(priv, DOT11_OID_LONGRETRIES, 0, &llimit); + if (lifetime) + rvalue |= + mgt_set_request(priv, DOT11_OID_MAXTXLIFETIME, 0, + &lifetime); + return rvalue; +} + +static int +prism54_get_retry(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue = 0; + vwrq->disabled = 0; /* It cannot be disabled */ + + if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + /* we are asked for the life time */ + rvalue = + mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r); + vwrq->value = r.u * 1024; + vwrq->flags = IW_RETRY_LIFETIME; + } else if ((vwrq->flags & IW_RETRY_MAX)) { + /* we are asked for the long retry limit */ + rvalue |= + mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r); + vwrq->value = r.u; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + } else { + /* default. get the short retry limit */ + rvalue |= + mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r); + vwrq->value = r.u; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MIN; + } + + return rvalue; +} + +static int +prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int rvalue = 0, force = 0; + int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0; + union oid_res_t r; + + /* with the new API, it's impossible to get a NULL pointer. + * New version of iwconfig set the IW_ENCODE_NOKEY flag + * when no key is given, but older versions don't. */ + + if (dwrq->length > 0) { + /* we have a key to set */ + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int current_index; + struct obj_key key = { DOT11_PRIV_WEP, 0, "" }; + + /* get the current key index */ + rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + current_index = r.u; + /* Verify that the key is not marked as invalid */ + if (!(dwrq->flags & IW_ENCODE_NOKEY)) { + key.length = dwrq->length > sizeof (key.key) ? + sizeof (key.key) : dwrq->length; + memcpy(key.key, extra, key.length); + if (key.length == 32) + /* we want WPA-PSK */ + key.type = DOT11_PRIV_TKIP; + if ((index < 0) || (index > 3)) + /* no index provided use the current one */ + index = current_index; + + /* now send the key to the card */ + rvalue |= + mgt_set_request(priv, DOT11_OID_DEFKEYX, index, + &key); + } + /* + * If a valid key is set, encryption should be enabled + * (user may turn it off later). + * This is also how "iwconfig ethX key on" works + */ + if ((index == current_index) && (key.length > 0)) + force = 1; + } else { + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + if ((index >= 0) && (index <= 3)) { + /* we want to set the key index */ + rvalue |= + mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, + &index); + } else { + if (!dwrq->flags & IW_ENCODE_MODE) { + /* we cannot do anything. Complain. */ + return -EINVAL; + } + } + } + /* now read the flags */ + if (dwrq->flags & IW_ENCODE_DISABLED) { + /* Encoding disabled, + * authen = DOT11_AUTH_OS; + * invoke = 0; + * exunencrypt = 0; */ + } + if (dwrq->flags & IW_ENCODE_OPEN) + /* Encode but accept non-encoded packets. No auth */ + invoke = 1; + if ((dwrq->flags & IW_ENCODE_RESTRICTED) || force) { + /* Refuse non-encoded packets. Auth */ + authen = DOT11_AUTH_BOTH; + invoke = 1; + exunencrypt = 1; + } + /* do the change if requested */ + if ((dwrq->flags & IW_ENCODE_MODE) || force) { + rvalue |= + mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); + rvalue |= + mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke); + rvalue |= + mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, + &exunencrypt); + } + return rvalue; +} + +static int +prism54_get_encode(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct obj_key *key; + u32 devindex, index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + u32 authen = 0, invoke = 0, exunencrypt = 0; + int rvalue; + union oid_res_t r; + + /* first get the flags */ + rvalue = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r); + authen = r.u; + rvalue |= mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r); + invoke = r.u; + rvalue |= mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r); + exunencrypt = r.u; + + if (invoke && (authen == DOT11_AUTH_BOTH) && exunencrypt) + dwrq->flags = IW_ENCODE_RESTRICTED; + else if ((authen == DOT11_AUTH_OS) && !exunencrypt) { + if (invoke) + dwrq->flags = IW_ENCODE_OPEN; + else + dwrq->flags = IW_ENCODE_DISABLED; + } else + /* The card should not work in this state */ + dwrq->flags = 0; + + /* get the current device key index */ + rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + devindex = r.u; + /* Now get the key, return it */ + if ((index < 0) || (index > 3)) + /* no index provided, use the current one */ + index = devindex; + rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYX, index, NULL, &r); + key = r.ptr; + dwrq->length = key->length; + memcpy(extra, key->key, dwrq->length); + kfree(key); + /* return the used key index */ + dwrq->flags |= devindex + 1; + + return rvalue; +} + +static int +prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, OID_INL_OUTPUTPOWER, 0, NULL, &r); + /* intersil firmware operates in 0.25 dBm (1/4 dBm) */ + vwrq->value = (s32) r.u / 4; + vwrq->fixed = 1; + /* radio is not turned of + * btw: how is possible to turn off only the radio + */ + vwrq->disabled = 0; + + return rvalue; +} + +static int +prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + s32 u = vwrq->value; + + /* intersil firmware operates in 0.25 dBm (1/4) */ + u *= 4; + if (vwrq->disabled) { + /* don't know how to disable radio */ + printk(KERN_DEBUG + "%s: %s() disabling radio is not yet supported.\n", + priv->ndev->name, __FUNCTION__); + return -ENOTSUPP; + } else if (vwrq->fixed) + /* currently only fixed value is supported */ + return mgt_set_request(priv, OID_INL_OUTPUTPOWER, 0, &u); + else { + printk(KERN_DEBUG + "%s: %s() auto power will be implemented later.\n", + priv->ndev->name, __FUNCTION__); + return -ENOTSUPP; + } +} + +static int +prism54_reset(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_reset(netdev_priv(ndev), 0); + + return 0; +} + +static int +prism54_get_oid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + union oid_res_t r; + int rvalue; + enum oid_num_t n = dwrq->flags; + + rvalue = mgt_get_request((islpci_private *) ndev->priv, n, 0, NULL, &r); + dwrq->length = mgt_response_to_str(n, &r, extra); + if ((isl_oid[n].flags & OID_FLAG_TYPE) != OID_TYPE_U32) + kfree(r.ptr); + return rvalue; +} + +static int +prism54_set_u32(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + u32 oid = uwrq[0], u = uwrq[1]; + + return mgt_set_request((islpci_private *) ndev->priv, oid, 0, &u); +} + +static int +prism54_set_raw(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + u32 oid = dwrq->flags; + + return mgt_set_request((islpci_private *) ndev->priv, oid, 0, extra); +} + +void +prism54_acl_init(struct islpci_acl *acl) +{ + sema_init(&acl->sem, 1); + INIT_LIST_HEAD(&acl->mac_list); + acl->size = 0; + acl->policy = MAC_POLICY_OPEN; +} + +static void +prism54_clear_mac(struct islpci_acl *acl) +{ + struct list_head *ptr, *next; + struct mac_entry *entry; + + if (down_interruptible(&acl->sem)) + return; + + if (acl->size == 0) { + up(&acl->sem); + return; + } + + for (ptr = acl->mac_list.next, next = ptr->next; + ptr != &acl->mac_list; ptr = next, next = ptr->next) { + entry = list_entry(ptr, struct mac_entry, _list); + list_del(ptr); + kfree(entry); + } + acl->size = 0; + up(&acl->sem); +} + +void +prism54_acl_clean(struct islpci_acl *acl) +{ + prism54_clear_mac(acl); +} + +static int +prism54_add_mac(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + struct mac_entry *entry; + struct sockaddr *addr = (struct sockaddr *) extra; + + if (addr->sa_family != ARPHRD_ETHER) + return -EOPNOTSUPP; + + entry = kmalloc(sizeof (struct mac_entry), GFP_KERNEL); + if (entry == NULL) + return -ENOMEM; + + memcpy(entry->addr, addr->sa_data, ETH_ALEN); + + if (down_interruptible(&acl->sem)) { + kfree(entry); + return -ERESTARTSYS; + } + list_add_tail(&entry->_list, &acl->mac_list); + acl->size++; + up(&acl->sem); + + return 0; +} + +static int +prism54_del_mac(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + struct mac_entry *entry; + struct list_head *ptr; + struct sockaddr *addr = (struct sockaddr *) extra; + + if (addr->sa_family != ARPHRD_ETHER) + return -EOPNOTSUPP; + + if (down_interruptible(&acl->sem)) + return -ERESTARTSYS; + for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) { + entry = list_entry(ptr, struct mac_entry, _list); + + if (memcmp(entry->addr, addr->sa_data, ETH_ALEN) == 0) { + list_del(ptr); + acl->size--; + kfree(entry); + up(&acl->sem); + return 0; + } + } + up(&acl->sem); + return -EINVAL; +} + +static int +prism54_get_mac(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + struct mac_entry *entry; + struct list_head *ptr; + struct sockaddr *dst = (struct sockaddr *) extra; + + dwrq->length = 0; + + if (down_interruptible(&acl->sem)) + return -ERESTARTSYS; + + for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) { + entry = list_entry(ptr, struct mac_entry, _list); + + memcpy(dst->sa_data, entry->addr, ETH_ALEN); + dst->sa_family = ARPHRD_ETHER; + dwrq->length++; + dst++; + } + up(&acl->sem); + return 0; +} + +/* Setting policy also clears the MAC acl, even if we don't change the defaut + * policy + */ + +static int +prism54_set_policy(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + u32 mlmeautolevel; + + prism54_clear_mac(acl); + + if ((*uwrq < MAC_POLICY_OPEN) || (*uwrq > MAC_POLICY_REJECT)) + return -EINVAL; + + down_write(&priv->mib_sem); + + acl->policy = *uwrq; + + /* the ACL code needs an intermediate mlmeautolevel */ + if ((priv->iw_mode == IW_MODE_MASTER) && + (acl->policy != MAC_POLICY_OPEN)) + mlmeautolevel = DOT11_MLME_INTERMEDIATE; + else + mlmeautolevel = CARD_DEFAULT_MLME_MODE; + if (priv->wpa) + mlmeautolevel = DOT11_MLME_EXTENDED; + mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel); + /* restart the card with our new policy */ + if (mgt_commit(priv)) { + up_write(&priv->mib_sem); + return -EIO; + } + up_write(&priv->mib_sem); + + return 0; +} + +static int +prism54_get_policy(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + + *uwrq = acl->policy; + + return 0; +} + +/* Return 1 only if client should be accepted. */ + +static int +prism54_mac_accept(struct islpci_acl *acl, char *mac) +{ + struct list_head *ptr; + struct mac_entry *entry; + int res = 0; + + if (down_interruptible(&acl->sem)) + return -ERESTARTSYS; + + if (acl->policy == MAC_POLICY_OPEN) { + up(&acl->sem); + return 1; + } + + for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) { + entry = list_entry(ptr, struct mac_entry, _list); + if (memcmp(entry->addr, mac, ETH_ALEN) == 0) { + res = 1; + break; + } + } + res = (acl->policy == MAC_POLICY_ACCEPT) ? !res : res; + up(&acl->sem); + + return res; +} + +static int +prism54_kick_all(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + struct obj_mlme *mlme; + int rvalue; + + mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL); + if (mlme == NULL) + return -ENOMEM; + + /* Tell the card to kick every client */ + mlme->id = 0; + rvalue = + mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme); + kfree(mlme); + + return rvalue; +} + +static int +prism54_kick_mac(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + struct obj_mlme *mlme; + struct sockaddr *addr = (struct sockaddr *) extra; + int rvalue; + + if (addr->sa_family != ARPHRD_ETHER) + return -EOPNOTSUPP; + + mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL); + if (mlme == NULL) + return -ENOMEM; + + /* Tell the card to only kick the corresponding bastard */ + memcpy(mlme->address, addr->sa_data, ETH_ALEN); + mlme->id = -1; + rvalue = + mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme); + + kfree(mlme); + + return rvalue; +} + +/* Translate a TRAP oid into a wireless event. Called in islpci_mgt_receive. */ + +static void +format_event(islpci_private *priv, char *dest, const char *str, + const struct obj_mlme *mlme, u16 *length, int error) +{ + const u8 *a = mlme->address; + int n = snprintf(dest, IW_CUSTOM_MAX, + "%s %s %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X %s (%2.2X)", + str, + ((priv->iw_mode == IW_MODE_MASTER) ? "from" : "to"), + a[0], a[1], a[2], a[3], a[4], a[5], + (error ? (mlme->code ? " : REJECTED " : " : ACCEPTED ") + : ""), mlme->code); + BUG_ON(n > IW_CUSTOM_MAX); + *length = n; +} + +static void +send_formatted_event(islpci_private *priv, const char *str, + const struct obj_mlme *mlme, int error) +{ + union iwreq_data wrqu; + char *memptr; + + memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL); + if (!memptr) + return; + wrqu.data.pointer = memptr; + wrqu.data.length = 0; + format_event(priv, memptr, str, mlme, &wrqu.data.length, + error); + wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr); + kfree(memptr); +} + +static void +send_simple_event(islpci_private *priv, const char *str) +{ + union iwreq_data wrqu; + char *memptr; + int n = strlen(str); + + memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL); + if (!memptr) + return; + BUG_ON(n > IW_CUSTOM_MAX); + wrqu.data.pointer = memptr; + wrqu.data.length = n; + strcpy(memptr, str); + wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr); + kfree(memptr); +} + +static void +link_changed(struct net_device *ndev, u32 bitrate) +{ + islpci_private *priv = netdev_priv(ndev); + + if (bitrate) { + if (priv->iw_mode == IW_MODE_INFRA) { + union iwreq_data uwrq; + prism54_get_wap(ndev, NULL, (struct sockaddr *) &uwrq, + NULL); + wireless_send_event(ndev, SIOCGIWAP, &uwrq, NULL); + } else + send_simple_event(netdev_priv(ndev), + "Link established"); + } else + send_simple_event(netdev_priv(ndev), "Link lost"); +} + +/* Beacon/ProbeResp payload header */ +struct ieee80211_beacon_phdr { + u8 timestamp[8]; + u16 beacon_int; + u16 capab_info; +} __attribute__ ((packed)); + +#define WLAN_EID_GENERIC 0xdd +static u8 wpa_oid[4] = { 0x00, 0x50, 0xf2, 1 }; + +#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5] +#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" + +static void +prism54_wpa_ie_add(islpci_private *priv, u8 *bssid, + u8 *wpa_ie, size_t wpa_ie_len) +{ + struct list_head *ptr; + struct islpci_bss_wpa_ie *bss = NULL; + + if (wpa_ie_len > MAX_WPA_IE_LEN) + wpa_ie_len = MAX_WPA_IE_LEN; + + if (down_interruptible(&priv->wpa_sem)) + return; + + /* try to use existing entry */ + list_for_each(ptr, &priv->bss_wpa_list) { + bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); + if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) { + list_move(&bss->list, &priv->bss_wpa_list); + break; + } + bss = NULL; + } + + if (bss == NULL) { + /* add a new BSS entry; if max number of entries is already + * reached, replace the least recently updated */ + if (priv->num_bss_wpa >= MAX_BSS_WPA_IE_COUNT) { + bss = list_entry(priv->bss_wpa_list.prev, + struct islpci_bss_wpa_ie, list); + list_del(&bss->list); + } else { + bss = kmalloc(sizeof (*bss), GFP_ATOMIC); + if (bss != NULL) { + priv->num_bss_wpa++; + memset(bss, 0, sizeof (*bss)); + } + } + if (bss != NULL) { + memcpy(bss->bssid, bssid, ETH_ALEN); + list_add(&bss->list, &priv->bss_wpa_list); + } + } + + if (bss != NULL) { + memcpy(bss->wpa_ie, wpa_ie, wpa_ie_len); + bss->wpa_ie_len = wpa_ie_len; + bss->last_update = jiffies; + } else { + printk(KERN_DEBUG "Failed to add BSS WPA entry for " MACSTR + "\n", MAC2STR(bssid)); + } + + /* expire old entries from WPA list */ + while (priv->num_bss_wpa > 0) { + bss = list_entry(priv->bss_wpa_list.prev, + struct islpci_bss_wpa_ie, list); + if (!time_after(jiffies, bss->last_update + 60 * HZ)) + break; + + list_del(&bss->list); + priv->num_bss_wpa--; + kfree(bss); + } + + up(&priv->wpa_sem); +} + +static size_t +prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie) +{ + struct list_head *ptr; + struct islpci_bss_wpa_ie *bss = NULL; + size_t len = 0; + + if (down_interruptible(&priv->wpa_sem)) + return 0; + + list_for_each(ptr, &priv->bss_wpa_list) { + bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); + if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) + break; + bss = NULL; + } + if (bss) { + len = bss->wpa_ie_len; + memcpy(wpa_ie, bss->wpa_ie, len); + } + up(&priv->wpa_sem); + + return len; +} + +void +prism54_wpa_ie_init(islpci_private *priv) +{ + INIT_LIST_HEAD(&priv->bss_wpa_list); + sema_init(&priv->wpa_sem, 1); +} + +void +prism54_wpa_ie_clean(islpci_private *priv) +{ + struct list_head *ptr, *n; + + list_for_each_safe(ptr, n, &priv->bss_wpa_list) { + struct islpci_bss_wpa_ie *bss; + bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); + kfree(bss); + } +} + +static void +prism54_process_bss_data(islpci_private *priv, u32 oid, u8 *addr, + u8 *payload, size_t len) +{ + struct ieee80211_beacon_phdr *hdr; + u8 *pos, *end; + + if (!priv->wpa) + return; + + hdr = (struct ieee80211_beacon_phdr *) payload; + pos = (u8 *) (hdr + 1); + end = payload + len; + while (pos < end) { + if (pos + 2 + pos[1] > end) { + printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed " + "for " MACSTR "\n", MAC2STR(addr)); + return; + } + if (pos[0] == WLAN_EID_GENERIC && pos[1] >= 4 && + memcmp(pos + 2, wpa_oid, 4) == 0) { + prism54_wpa_ie_add(priv, addr, pos, pos[1] + 2); + return; + } + pos += 2 + pos[1]; + } +} + +static void +handle_request(islpci_private *priv, struct obj_mlme *mlme, enum oid_num_t oid) +{ + if (((mlme->state == DOT11_STATE_AUTHING) || + (mlme->state == DOT11_STATE_ASSOCING)) + && mgt_mlme_answer(priv)) { + /* Someone is requesting auth and we must respond. Just send back + * the trap with error code set accordingly. + */ + mlme->code = prism54_mac_accept(&priv->acl, + mlme->address) ? 0 : 1; + mgt_set_request(priv, oid, 0, mlme); + } +} + +static int +prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, + char *data) +{ + struct obj_mlme *mlme = (struct obj_mlme *) data; + struct obj_mlmeex *mlmeex = (struct obj_mlmeex *) data; + struct obj_mlmeex *confirm; + u8 wpa_ie[MAX_WPA_IE_LEN]; + int wpa_ie_len; + size_t len = 0; /* u16, better? */ + u8 *payload = NULL, *pos = NULL; + int ret; + + /* I think all trapable objects are listed here. + * Some oids have a EX version. The difference is that they are emitted + * in DOT11_MLME_EXTENDED mode (set with DOT11_OID_MLMEAUTOLEVEL) + * with more info. + * The few events already defined by the wireless tools are not really + * suited. We use the more flexible custom event facility. + */ + + if (oid >= DOT11_OID_BEACON) { + len = mlmeex->size; + payload = pos = mlmeex->data; + } + + /* I fear prism54_process_bss_data won't work with big endian data */ + if ((oid == DOT11_OID_BEACON) || (oid == DOT11_OID_PROBE)) + prism54_process_bss_data(priv, oid, mlmeex->address, + payload, len); + + mgt_le_to_cpu(isl_oid[oid].flags & OID_FLAG_TYPE, (void *) mlme); + + switch (oid) { + + case GEN_OID_LINKSTATE: + link_changed(priv->ndev, (u32) *data); + break; + + case DOT11_OID_MICFAILURE: + send_simple_event(priv, "Mic failure"); + break; + + case DOT11_OID_DEAUTHENTICATE: + send_formatted_event(priv, "DeAuthenticate request", mlme, 0); + break; + + case DOT11_OID_AUTHENTICATE: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Authenticate request", mlme, 1); + break; + + case DOT11_OID_DISASSOCIATE: + send_formatted_event(priv, "Disassociate request", mlme, 0); + break; + + case DOT11_OID_ASSOCIATE: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Associate request", mlme, 1); + break; + + case DOT11_OID_REASSOCIATE: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "ReAssociate request", mlme, 1); + break; + + case DOT11_OID_BEACON: + send_formatted_event(priv, + "Received a beacon from an unkown AP", + mlme, 0); + break; + + case DOT11_OID_PROBE: + /* we received a probe from a client. */ + send_formatted_event(priv, "Received a probe from client", mlme, + 0); + break; + + /* Note : "mlme" is actually a "struct obj_mlmeex *" here, but this + * is backward compatible layout-wise with "struct obj_mlme". + */ + + case DOT11_OID_DEAUTHENTICATEEX: + send_formatted_event(priv, "DeAuthenticate request", mlme, 0); + break; + + case DOT11_OID_AUTHENTICATEEX: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Authenticate request (ex)", mlme, 1); + + if (priv->iw_mode != IW_MODE_MASTER + && mlmeex->state != DOT11_STATE_AUTHING) + break; + + confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC); + + if (!confirm) + break; + + memcpy(&confirm->address, mlmeex->address, ETH_ALEN); + printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + mlmeex->address[0], + mlmeex->address[1], + mlmeex->address[2], + mlmeex->address[3], + mlmeex->address[4], + mlmeex->address[5] + ); + confirm->id = -1; /* or mlmeex->id ? */ + confirm->state = 0; /* not used */ + confirm->code = 0; + confirm->size = 6; + confirm->data[0] = 0x00; + confirm->data[1] = 0x00; + confirm->data[2] = 0x02; + confirm->data[3] = 0x00; + confirm->data[4] = 0x00; + confirm->data[5] = 0x00; + + ret = mgt_set_varlen(priv, DOT11_OID_ASSOCIATEEX, confirm, 6); + + kfree(confirm); + if (ret) + return ret; + break; + + case DOT11_OID_DISASSOCIATEEX: + send_formatted_event(priv, "Disassociate request (ex)", mlme, 0); + break; + + case DOT11_OID_ASSOCIATEEX: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Associate request (ex)", mlme, 1); + + if (priv->iw_mode != IW_MODE_MASTER + && mlmeex->state != DOT11_STATE_AUTHING) + break; + + confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); + + if (!confirm) + break; + + memcpy(&confirm->address, mlmeex->address, ETH_ALEN); + + confirm->id = ((struct obj_mlmeex *)mlme)->id; + confirm->state = 0; /* not used */ + confirm->code = 0; + + wpa_ie_len = prism54_wpa_ie_get(priv, mlmeex->address, wpa_ie); + + if (!wpa_ie_len) { + printk(KERN_DEBUG "No WPA IE found from " + "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + mlmeex->address[0], + mlmeex->address[1], + mlmeex->address[2], + mlmeex->address[3], + mlmeex->address[4], + mlmeex->address[5] + ); + kfree(confirm); + break; + } + + confirm->size = wpa_ie_len; + memcpy(&confirm->data, wpa_ie, wpa_ie_len); + + mgt_set_varlen(priv, oid, confirm, wpa_ie_len); + + kfree(confirm); + + break; + + case DOT11_OID_REASSOCIATEEX: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Reassociate request (ex)", mlme, 1); + + if (priv->iw_mode != IW_MODE_MASTER + && mlmeex->state != DOT11_STATE_ASSOCING) + break; + + confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); + + if (!confirm) + break; + + memcpy(&confirm->address, mlmeex->address, ETH_ALEN); + + confirm->id = mlmeex->id; + confirm->state = 0; /* not used */ + confirm->code = 0; + + wpa_ie_len = prism54_wpa_ie_get(priv, mlmeex->address, wpa_ie); + + if (!wpa_ie_len) { + printk(KERN_DEBUG "No WPA IE found from " + "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + mlmeex->address[0], + mlmeex->address[1], + mlmeex->address[2], + mlmeex->address[3], + mlmeex->address[4], + mlmeex->address[5] + ); + kfree(confirm); + break; + } + + confirm->size = wpa_ie_len; + memcpy(&confirm->data, wpa_ie, wpa_ie_len); + + mgt_set_varlen(priv, oid, confirm, wpa_ie_len); + + kfree(confirm); + + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Process a device trap. This is called via schedule_work(), outside of + * interrupt context, no locks held. + */ +void +prism54_process_trap(void *data) +{ + struct islpci_mgmtframe *frame = data; + struct net_device *ndev = frame->ndev; + enum oid_num_t n = mgt_oidtonum(frame->header->oid); + + if (n != OID_NUM_LAST) + prism54_process_trap_helper(netdev_priv(ndev), n, frame->data); + islpci_mgt_release(frame); +} + +int +prism54_set_mac_address(struct net_device *ndev, void *addr) +{ + islpci_private *priv = netdev_priv(ndev); + int ret; + + if (ndev->addr_len != 6) + return -EINVAL; + ret = mgt_set_request(priv, GEN_OID_MACADDRESS, 0, + &((struct sockaddr *) addr)->sa_data); + if (!ret) + memcpy(priv->ndev->dev_addr, + &((struct sockaddr *) addr)->sa_data, 6); + + return ret; +} + +/* Note: currently, use hostapd ioctl from the Host AP driver for WPA + * support. This is to be replaced with Linux wireless extensions once they + * get WPA support. */ + +/* Note II: please leave all this together as it will be easier to remove later, + * once wireless extensions add WPA support -mcgrof */ + +/* PRISM54_HOSTAPD ioctl() cmd: */ +enum { + PRISM2_SET_ENCRYPTION = 6, + PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12, + PRISM2_HOSTAPD_MLME = 13, + PRISM2_HOSTAPD_SCAN_REQ = 14, +}; + +#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+12 +#define PRISM54_HOSTAPD SIOCIWFIRSTPRIV+25 +#define PRISM54_DROP_UNENCRYPTED SIOCIWFIRSTPRIV+26 + +#define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 +#define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ +((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) + +/* Maximum length for algorithm names (-1 for nul termination) + * used in ioctl() */ +#define HOSTAP_CRYPT_ALG_NAME_LEN 16 + +struct prism2_hostapd_param { + u32 cmd; + u8 sta_addr[ETH_ALEN]; + union { + struct { + u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN]; + u32 flags; + u32 err; + u8 idx; + u8 seq[8]; /* sequence counter (set: RX, get: TX) */ + u16 key_len; + u8 key[0]; + } crypt; + struct { + u8 len; + u8 data[0]; + } generic_elem; + struct { +#define MLME_STA_DEAUTH 0 +#define MLME_STA_DISASSOC 1 + u16 cmd; + u16 reason_code; + } mlme; + struct { + u8 ssid_len; + u8 ssid[32]; + } scan_req; + } u; +}; + + +static int +prism2_ioctl_set_encryption(struct net_device *dev, + struct prism2_hostapd_param *param, + int param_len) +{ + islpci_private *priv = netdev_priv(dev); + int rvalue = 0, force = 0; + int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0; + union oid_res_t r; + + /* with the new API, it's impossible to get a NULL pointer. + * New version of iwconfig set the IW_ENCODE_NOKEY flag + * when no key is given, but older versions don't. */ + + if (param->u.crypt.key_len > 0) { + /* we have a key to set */ + int index = param->u.crypt.idx; + int current_index; + struct obj_key key = { DOT11_PRIV_TKIP, 0, "" }; + + /* get the current key index */ + rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + current_index = r.u; + /* Verify that the key is not marked as invalid */ + if (!(param->u.crypt.flags & IW_ENCODE_NOKEY)) { + key.length = param->u.crypt.key_len > sizeof (param->u.crypt.key) ? + sizeof (param->u.crypt.key) : param->u.crypt.key_len; + memcpy(key.key, param->u.crypt.key, key.length); + if (key.length == 32) + /* we want WPA-PSK */ + key.type = DOT11_PRIV_TKIP; + if ((index < 0) || (index > 3)) + /* no index provided use the current one */ + index = current_index; + + /* now send the key to the card */ + rvalue |= + mgt_set_request(priv, DOT11_OID_DEFKEYX, index, + &key); + } + /* + * If a valid key is set, encryption should be enabled + * (user may turn it off later). + * This is also how "iwconfig ethX key on" works + */ + if ((index == current_index) && (key.length > 0)) + force = 1; + } else { + int index = (param->u.crypt.flags & IW_ENCODE_INDEX) - 1; + if ((index >= 0) && (index <= 3)) { + /* we want to set the key index */ + rvalue |= + mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, + &index); + } else { + if (!param->u.crypt.flags & IW_ENCODE_MODE) { + /* we cannot do anything. Complain. */ + return -EINVAL; + } + } + } + /* now read the flags */ + if (param->u.crypt.flags & IW_ENCODE_DISABLED) { + /* Encoding disabled, + * authen = DOT11_AUTH_OS; + * invoke = 0; + * exunencrypt = 0; */ + } + if (param->u.crypt.flags & IW_ENCODE_OPEN) + /* Encode but accept non-encoded packets. No auth */ + invoke = 1; + if ((param->u.crypt.flags & IW_ENCODE_RESTRICTED) || force) { + /* Refuse non-encoded packets. Auth */ + authen = DOT11_AUTH_BOTH; + invoke = 1; + exunencrypt = 1; + } + /* do the change if requested */ + if ((param->u.crypt.flags & IW_ENCODE_MODE) || force) { + rvalue |= + mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); + rvalue |= + mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke); + rvalue |= + mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, + &exunencrypt); + } + return rvalue; +} + +static int +prism2_ioctl_set_generic_element(struct net_device *ndev, + struct prism2_hostapd_param *param, + int param_len) +{ + islpci_private *priv = netdev_priv(ndev); + int max_len, len, alen, ret=0; + struct obj_attachment *attach; + + len = param->u.generic_elem.len; + max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; + if (max_len < 0 || max_len < len) + return -EINVAL; + + alen = sizeof(*attach) + len; + attach = kmalloc(alen, GFP_KERNEL); + if (attach == NULL) + return -ENOMEM; + + memset(attach, 0, alen); +#define WLAN_FC_TYPE_MGMT 0 +#define WLAN_FC_STYPE_ASSOC_REQ 0 +#define WLAN_FC_STYPE_REASSOC_REQ 2 + + /* Note: endianness is covered by mgt_set_varlen */ + + attach->type = (WLAN_FC_TYPE_MGMT << 2) | + (WLAN_FC_STYPE_ASSOC_REQ << 4); + attach->id = -1; + attach->size = len; + memcpy(attach->data, param->u.generic_elem.data, len); + + ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len); + + if (ret == 0) { + attach->type = (WLAN_FC_TYPE_MGMT << 2) | + (WLAN_FC_STYPE_REASSOC_REQ << 4); + + ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len); + + if (ret == 0) + printk(KERN_DEBUG "%s: WPA IE Attachment was set\n", + ndev->name); + } + + kfree(attach); + return ret; + +} + +static int +prism2_ioctl_mlme(struct net_device *dev, struct prism2_hostapd_param *param) +{ + return -EOPNOTSUPP; +} + +static int +prism2_ioctl_scan_req(struct net_device *ndev, + struct prism2_hostapd_param *param) +{ + islpci_private *priv = netdev_priv(ndev); + int i, rvalue; + struct obj_bsslist *bsslist; + u32 noise = 0; + char *extra = ""; + char *current_ev = "foo"; + union oid_res_t r; + + if (islpci_get_state(priv) < PRV_STATE_INIT) { + /* device is not ready, fail gently */ + return 0; + } + + /* first get the noise value. We will use it to report the link quality */ + rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); + noise = r.u; + + /* Ask the device for a list of known bss. We can report at most + * IW_MAX_AP=64 to the range struct. But the device won't repport anything + * if you change the value of IWMAX_BSS=24. + */ + rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); + bsslist = r.ptr; + + /* ok now, scan the list and translate its info */ + for (i = 0; i < min(IW_MAX_AP, (int) bsslist->nr); i++) + current_ev = prism54_translate_bss(ndev, current_ev, + extra + IW_SCAN_MAX_DATA, + &(bsslist->bsslist[i]), + noise); + kfree(bsslist); + + return rvalue; +} + +static int +prism54_hostapd(struct net_device *ndev, struct iw_point *p) +{ + struct prism2_hostapd_param *param; + int ret = 0; + u32 uwrq; + + printk(KERN_DEBUG "prism54_hostapd - len=%d\n", p->length); + if (p->length < sizeof(struct prism2_hostapd_param) || + p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) + return -EINVAL; + + param = (struct prism2_hostapd_param *) kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)) { + kfree(param); + return -EFAULT; + } + + switch (param->cmd) { + case PRISM2_SET_ENCRYPTION: + printk(KERN_DEBUG "%s: Caught WPA supplicant set encryption request\n", + ndev->name); + ret = prism2_ioctl_set_encryption(ndev, param, p->length); + break; + case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: + printk(KERN_DEBUG "%s: Caught WPA supplicant set WPA IE request\n", + ndev->name); + ret = prism2_ioctl_set_generic_element(ndev, param, + p->length); + break; + case PRISM2_HOSTAPD_MLME: + printk(KERN_DEBUG "%s: Caught WPA supplicant MLME request\n", + ndev->name); + ret = prism2_ioctl_mlme(ndev, param); + break; + case PRISM2_HOSTAPD_SCAN_REQ: + printk(KERN_DEBUG "%s: Caught WPA supplicant scan request\n", + ndev->name); + ret = prism2_ioctl_scan_req(ndev, param); + break; + case PRISM54_SET_WPA: + printk(KERN_DEBUG "%s: Caught WPA supplicant wpa init request\n", + ndev->name); + uwrq = 1; + ret = prism54_set_wpa(ndev, NULL, &uwrq, NULL); + break; + case PRISM54_DROP_UNENCRYPTED: + printk(KERN_DEBUG "%s: Caught WPA drop unencrypted request\n", + ndev->name); +#if 0 + uwrq = 0x01; + mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &uwrq); + down_write(&priv->mib_sem); + mgt_commit(priv); + up_write(&priv->mib_sem); +#endif + /* Not necessary, as set_wpa does it, should we just do it here though? */ + ret = 0; + break; + default: + printk(KERN_DEBUG "%s: Caught a WPA supplicant request that is not supported\n", + ndev->name); + ret = -EOPNOTSUPP; + break; + } + + if (ret == 0 && copy_to_user(p->pointer, param, p->length)) + ret = -EFAULT; + + kfree(param); + + return ret; +} + +static int +prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 mlme, authen, dot1x, filter, wep; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + wep = 1; /* For privacy invoked */ + filter = 1; /* Filter out all unencrypted frames */ + dot1x = 0x01; /* To enable eap filter */ + mlme = DOT11_MLME_EXTENDED; + authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */ + + down_write(&priv->mib_sem); + priv->wpa = *uwrq; + + switch (priv->wpa) { + default: + case 0: /* Clears/disables WPA and friends */ + wep = 0; + filter = 0; /* Do not filter un-encrypted data */ + dot1x = 0; + mlme = DOT11_MLME_AUTO; + printk("%s: Disabling WPA\n", ndev->name); + break; + case 2: + case 1: /* WPA */ + printk("%s: Enabling WPA\n", ndev->name); + break; + } + up_write(&priv->mib_sem); + + mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); + mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &wep); + mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &filter); + mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x); + mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlme); + + return 0; +} + +static int +prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + *uwrq = priv->wpa; + return 0; +} + +static int +prism54_set_prismhdr(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + priv->monitor_type = + (*uwrq ? ARPHRD_IEEE80211_PRISM : ARPHRD_IEEE80211); + if (priv->iw_mode == IW_MODE_MONITOR) + priv->ndev->type = priv->monitor_type; + + return 0; +} + +static int +prism54_get_prismhdr(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + *uwrq = (priv->monitor_type == ARPHRD_IEEE80211_PRISM); + return 0; +} + +static int +prism54_debug_oid(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + priv->priv_oid = *uwrq; + printk("%s: oid 0x%08X\n", ndev->name, *uwrq); + + return 0; +} + +static int +prism54_debug_get_oid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_mgmtframe *response; + int ret = -EIO; + + printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid); + data->length = 0; + + if (islpci_get_state(priv) >= PRV_STATE_INIT) { + ret = + islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, + priv->priv_oid, extra, 256, + &response); + printk("%s: ret: %i\n", ndev->name, ret); + if (ret || !response + || response->header->operation == PIMFOR_OP_ERROR) { + if (response) { + islpci_mgt_release(response); + } + printk("%s: EIO\n", ndev->name); + ret = -EIO; + } + if (!ret) { + data->length = response->header->length; + memcpy(extra, response->data, data->length); + islpci_mgt_release(response); + printk("%s: len: %i\n", ndev->name, data->length); + } + } + + return ret; +} + +static int +prism54_debug_set_oid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_mgmtframe *response; + int ret = 0, response_op = PIMFOR_OP_ERROR; + + printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid, + data->length); + + if (islpci_get_state(priv) >= PRV_STATE_INIT) { + ret = + islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, + priv->priv_oid, extra, data->length, + &response); + printk("%s: ret: %i\n", ndev->name, ret); + if (ret || !response + || response->header->operation == PIMFOR_OP_ERROR) { + if (response) { + islpci_mgt_release(response); + } + printk("%s: EIO\n", ndev->name); + ret = -EIO; + } + if (!ret) { + response_op = response->header->operation; + printk("%s: response_op: %i\n", ndev->name, + response_op); + islpci_mgt_release(response); + } + } + + return (ret ? ret : -EINPROGRESS); +} + +static int +prism54_set_spy(struct net_device *ndev, + struct iw_request_info *info, + union iwreq_data *uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 u, oid = OID_INL_CONFIG; + + down_write(&priv->mib_sem); + mgt_get(priv, OID_INL_CONFIG, &u); + + if ((uwrq->data.length == 0) && (priv->spy_data.spy_number > 0)) + /* disable spy */ + u &= ~INL_CONFIG_RXANNEX; + else if ((uwrq->data.length > 0) && (priv->spy_data.spy_number == 0)) + /* enable spy */ + u |= INL_CONFIG_RXANNEX; + + mgt_set(priv, OID_INL_CONFIG, &u); + mgt_commit_list(priv, &oid, 1); + up_write(&priv->mib_sem); + + return iw_handler_set_spy(ndev, info, uwrq, extra); +} + +static const iw_handler prism54_handler[] = { + (iw_handler) prism54_commit, /* SIOCSIWCOMMIT */ + (iw_handler) prism54_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) prism54_set_freq, /* SIOCSIWFREQ */ + (iw_handler) prism54_get_freq, /* SIOCGIWFREQ */ + (iw_handler) prism54_set_mode, /* SIOCSIWMODE */ + (iw_handler) prism54_get_mode, /* SIOCGIWMODE */ + (iw_handler) prism54_set_sens, /* SIOCSIWSENS */ + (iw_handler) prism54_get_sens, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWRANGE */ + (iw_handler) prism54_get_range, /* SIOCGIWRANGE */ + (iw_handler) NULL, /* SIOCSIWPRIV */ + (iw_handler) NULL, /* SIOCGIWPRIV */ + (iw_handler) NULL, /* SIOCSIWSTATS */ + (iw_handler) NULL, /* SIOCGIWSTATS */ + prism54_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ + (iw_handler) prism54_set_wap, /* SIOCSIWAP */ + (iw_handler) prism54_get_wap, /* SIOCGIWAP */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* SIOCGIWAPLIST depreciated */ + (iw_handler) prism54_set_scan, /* SIOCSIWSCAN */ + (iw_handler) prism54_get_scan, /* SIOCGIWSCAN */ + (iw_handler) prism54_set_essid, /* SIOCSIWESSID */ + (iw_handler) prism54_get_essid, /* SIOCGIWESSID */ + (iw_handler) prism54_set_nick, /* SIOCSIWNICKN */ + (iw_handler) prism54_get_nick, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) prism54_set_rate, /* SIOCSIWRATE */ + (iw_handler) prism54_get_rate, /* SIOCGIWRATE */ + (iw_handler) prism54_set_rts, /* SIOCSIWRTS */ + (iw_handler) prism54_get_rts, /* SIOCGIWRTS */ + (iw_handler) prism54_set_frag, /* SIOCSIWFRAG */ + (iw_handler) prism54_get_frag, /* SIOCGIWFRAG */ + (iw_handler) prism54_set_txpower, /* SIOCSIWTXPOW */ + (iw_handler) prism54_get_txpower, /* SIOCGIWTXPOW */ + (iw_handler) prism54_set_retry, /* SIOCSIWRETRY */ + (iw_handler) prism54_get_retry, /* SIOCGIWRETRY */ + (iw_handler) prism54_set_encode, /* SIOCSIWENCODE */ + (iw_handler) prism54_get_encode, /* SIOCGIWENCODE */ + (iw_handler) NULL, /* SIOCSIWPOWER */ + (iw_handler) NULL, /* SIOCGIWPOWER */ +}; + +/* The low order bit identify a SET (0) or a GET (1) ioctl. */ + +#define PRISM54_RESET SIOCIWFIRSTPRIV +#define PRISM54_GET_POLICY SIOCIWFIRSTPRIV+1 +#define PRISM54_SET_POLICY SIOCIWFIRSTPRIV+2 +#define PRISM54_GET_MAC SIOCIWFIRSTPRIV+3 +#define PRISM54_ADD_MAC SIOCIWFIRSTPRIV+4 + +#define PRISM54_DEL_MAC SIOCIWFIRSTPRIV+6 + +#define PRISM54_KICK_MAC SIOCIWFIRSTPRIV+8 + +#define PRISM54_KICK_ALL SIOCIWFIRSTPRIV+10 + +#define PRISM54_GET_WPA SIOCIWFIRSTPRIV+11 +#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+12 + +#define PRISM54_DBG_OID SIOCIWFIRSTPRIV+14 +#define PRISM54_DBG_GET_OID SIOCIWFIRSTPRIV+15 +#define PRISM54_DBG_SET_OID SIOCIWFIRSTPRIV+16 + +#define PRISM54_GET_OID SIOCIWFIRSTPRIV+17 +#define PRISM54_SET_OID_U32 SIOCIWFIRSTPRIV+18 +#define PRISM54_SET_OID_STR SIOCIWFIRSTPRIV+20 +#define PRISM54_SET_OID_ADDR SIOCIWFIRSTPRIV+22 + +#define PRISM54_GET_PRISMHDR SIOCIWFIRSTPRIV+23 +#define PRISM54_SET_PRISMHDR SIOCIWFIRSTPRIV+24 + +#define IWPRIV_SET_U32(n,x) { n, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } +#define IWPRIV_SET_SSID(n,x) { n, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } +#define IWPRIV_SET_ADDR(n,x) { n, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } +#define IWPRIV_GET(n,x) { n, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, "g_"x } + +#define IWPRIV_U32(n,x) IWPRIV_SET_U32(n,x), IWPRIV_GET(n,x) +#define IWPRIV_SSID(n,x) IWPRIV_SET_SSID(n,x), IWPRIV_GET(n,x) +#define IWPRIV_ADDR(n,x) IWPRIV_SET_ADDR(n,x), IWPRIV_GET(n,x) + +/* Note : limited to 128 private ioctls (wireless tools 26) */ + +static const struct iw_priv_args prism54_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + {PRISM54_RESET, 0, 0, "reset"}, + {PRISM54_GET_PRISMHDR, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_prismhdr"}, + {PRISM54_SET_PRISMHDR, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "set_prismhdr"}, + {PRISM54_GET_POLICY, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "getPolicy"}, + {PRISM54_SET_POLICY, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "setPolicy"}, + {PRISM54_GET_MAC, 0, IW_PRIV_TYPE_ADDR | 64, "getMac"}, + {PRISM54_ADD_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, + "addMac"}, + {PRISM54_DEL_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, + "delMac"}, + {PRISM54_KICK_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, + "kickMac"}, + {PRISM54_KICK_ALL, 0, 0, "kickAll"}, + {PRISM54_GET_WPA, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_wpa"}, + {PRISM54_SET_WPA, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "set_wpa"}, + {PRISM54_DBG_OID, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "dbg_oid"}, + {PRISM54_DBG_GET_OID, 0, IW_PRIV_TYPE_BYTE | 256, "dbg_get_oid"}, + {PRISM54_DBG_SET_OID, IW_PRIV_TYPE_BYTE | 256, 0, "dbg_set_oid"}, + /* --- sub-ioctls handlers --- */ + {PRISM54_GET_OID, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, ""}, + {PRISM54_SET_OID_U32, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, ""}, + {PRISM54_SET_OID_STR, + IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, ""}, + {PRISM54_SET_OID_ADDR, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, ""}, + /* --- sub-ioctls definitions --- */ + IWPRIV_ADDR(GEN_OID_MACADDRESS, "addr"), + IWPRIV_GET(GEN_OID_LINKSTATE, "linkstate"), + IWPRIV_U32(DOT11_OID_BSSTYPE, "bsstype"), + IWPRIV_ADDR(DOT11_OID_BSSID, "bssid"), + IWPRIV_U32(DOT11_OID_STATE, "state"), + IWPRIV_U32(DOT11_OID_AID, "aid"), + + IWPRIV_SSID(DOT11_OID_SSIDOVERRIDE, "ssidoverride"), + + IWPRIV_U32(DOT11_OID_MEDIUMLIMIT, "medlimit"), + IWPRIV_U32(DOT11_OID_BEACONPERIOD, "beacon"), + IWPRIV_U32(DOT11_OID_DTIMPERIOD, "dtimperiod"), + + IWPRIV_U32(DOT11_OID_AUTHENABLE, "authenable"), + IWPRIV_U32(DOT11_OID_PRIVACYINVOKED, "privinvok"), + IWPRIV_U32(DOT11_OID_EXUNENCRYPTED, "exunencrypt"), + + IWPRIV_U32(DOT11_OID_REKEYTHRESHOLD, "rekeythresh"), + + IWPRIV_U32(DOT11_OID_MAXTXLIFETIME, "maxtxlife"), + IWPRIV_U32(DOT11_OID_MAXRXLIFETIME, "maxrxlife"), + IWPRIV_U32(DOT11_OID_ALOFT_FIXEDRATE, "fixedrate"), + IWPRIV_U32(DOT11_OID_MAXFRAMEBURST, "frameburst"), + IWPRIV_U32(DOT11_OID_PSM, "psm"), + + IWPRIV_U32(DOT11_OID_BRIDGELOCAL, "bridge"), + IWPRIV_U32(DOT11_OID_CLIENTS, "clients"), + IWPRIV_U32(DOT11_OID_CLIENTSASSOCIATED, "clientassoc"), + IWPRIV_U32(DOT11_OID_DOT1XENABLE, "dot1xenable"), + IWPRIV_U32(DOT11_OID_ANTENNARX, "rxant"), + IWPRIV_U32(DOT11_OID_ANTENNATX, "txant"), + IWPRIV_U32(DOT11_OID_ANTENNADIVERSITY, "antdivers"), + IWPRIV_U32(DOT11_OID_EDTHRESHOLD, "edthresh"), + IWPRIV_U32(DOT11_OID_PREAMBLESETTINGS, "preamble"), + IWPRIV_GET(DOT11_OID_RATES, "rates"), + IWPRIV_U32(DOT11_OID_OUTPUTPOWER, ".11outpower"), + IWPRIV_GET(DOT11_OID_SUPPORTEDRATES, "supprates"), + IWPRIV_GET(DOT11_OID_SUPPORTEDFREQUENCIES, "suppfreq"), + + IWPRIV_U32(DOT11_OID_NOISEFLOOR, "noisefloor"), + IWPRIV_GET(DOT11_OID_FREQUENCYACTIVITY, "freqactivity"), + IWPRIV_U32(DOT11_OID_NONERPPROTECTION, "nonerpprotec"), + IWPRIV_U32(DOT11_OID_PROFILES, "profile"), + IWPRIV_GET(DOT11_OID_EXTENDEDRATES, "extrates"), + IWPRIV_U32(DOT11_OID_MLMEAUTOLEVEL, "mlmelevel"), + + IWPRIV_GET(DOT11_OID_BSSS, "bsss"), + IWPRIV_GET(DOT11_OID_BSSLIST, "bsslist"), + IWPRIV_U32(OID_INL_MODE, "mode"), + IWPRIV_U32(OID_INL_CONFIG, "config"), + IWPRIV_U32(OID_INL_DOT11D_CONFORMANCE, ".11dconform"), + IWPRIV_GET(OID_INL_PHYCAPABILITIES, "phycapa"), + IWPRIV_U32(OID_INL_OUTPUTPOWER, "outpower"), +}; + +static const iw_handler prism54_private_handler[] = { + (iw_handler) prism54_reset, + (iw_handler) prism54_get_policy, + (iw_handler) prism54_set_policy, + (iw_handler) prism54_get_mac, + (iw_handler) prism54_add_mac, + (iw_handler) NULL, + (iw_handler) prism54_del_mac, + (iw_handler) NULL, + (iw_handler) prism54_kick_mac, + (iw_handler) NULL, + (iw_handler) prism54_kick_all, + (iw_handler) prism54_get_wpa, + (iw_handler) prism54_set_wpa, + (iw_handler) NULL, + (iw_handler) prism54_debug_oid, + (iw_handler) prism54_debug_get_oid, + (iw_handler) prism54_debug_set_oid, + (iw_handler) prism54_get_oid, + (iw_handler) prism54_set_u32, + (iw_handler) NULL, + (iw_handler) prism54_set_raw, + (iw_handler) NULL, + (iw_handler) prism54_set_raw, + (iw_handler) prism54_get_prismhdr, + (iw_handler) prism54_set_prismhdr, +}; + +const struct iw_handler_def prism54_handler_def = { + .num_standard = sizeof (prism54_handler) / sizeof (iw_handler), + .num_private = sizeof (prism54_private_handler) / sizeof (iw_handler), + .num_private_args = + sizeof (prism54_private_args) / sizeof (struct iw_priv_args), + .standard = (iw_handler *) prism54_handler, + .private = (iw_handler *) prism54_private_handler, + .private_args = (struct iw_priv_args *) prism54_private_args, +#if WIRELESS_EXT == 16 + .spy_offset = offsetof(islpci_private, spy_data), +#endif /* WIRELESS_EXT == 16 */ +}; + +/* For wpa_supplicant */ + +int +prism54_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) +{ + struct iwreq *wrq = (struct iwreq *) rq; + int ret = -1; + switch (cmd) { + case PRISM54_HOSTAPD: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + ret = prism54_hostapd(ndev, &wrq->u.data); + return ret; + } + return -EOPNOTSUPP; +} diff --git a/drivers/net/wireless/prism54/isl_ioctl.h b/drivers/net/wireless/prism54/isl_ioctl.h new file mode 100644 index 00000000000..46d5cde80c8 --- /dev/null +++ b/drivers/net/wireless/prism54/isl_ioctl.h @@ -0,0 +1,51 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * (C) 2003 Aurelien Alleaume <slts@free.fr> + * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ISL_IOCTL_H +#define _ISL_IOCTL_H + +#include "islpci_mgt.h" +#include "islpci_dev.h" + +#include <net/iw_handler.h> /* New driver API */ + +#define SUPPORTED_WIRELESS_EXT 16 + +void prism54_mib_init(islpci_private *); + +struct iw_statistics *prism54_get_wireless_stats(struct net_device *); +void prism54_update_stats(islpci_private *); + +void prism54_acl_init(struct islpci_acl *); +void prism54_acl_clean(struct islpci_acl *); + +void prism54_process_trap(void *); + +void prism54_wpa_ie_init(islpci_private *priv); +void prism54_wpa_ie_clean(islpci_private *priv); + +int prism54_set_mac_address(struct net_device *, void *); + +int prism54_ioctl(struct net_device *, struct ifreq *, int); + +extern const struct iw_handler_def prism54_handler_def; + +#endif /* _ISL_IOCTL_H */ diff --git a/drivers/net/wireless/prism54/isl_oid.h b/drivers/net/wireless/prism54/isl_oid.h new file mode 100644 index 00000000000..419edf7ccf1 --- /dev/null +++ b/drivers/net/wireless/prism54/isl_oid.h @@ -0,0 +1,507 @@ +/* + * + * + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#if !defined(_ISL_OID_H) +#define _ISL_OID_H + +/* + * MIB related constant and structure definitions for communicating + * with the device firmware + */ + +struct obj_ssid { + u8 length; + char octets[33]; +} __attribute__ ((packed)); + +struct obj_key { + u8 type; /* dot11_priv_t */ + u8 length; + char key[32]; +} __attribute__ ((packed)); + +struct obj_mlme { + u8 address[6]; + u16 id; + u16 state; + u16 code; +} __attribute__ ((packed)); + +struct obj_mlmeex { + u8 address[6]; + u16 id; + u16 state; + u16 code; + u16 size; + u8 data[0]; +} __attribute__ ((packed)); + +struct obj_buffer { + u32 size; + u32 addr; /* 32bit bus address */ +} __attribute__ ((packed)); + +struct obj_bss { + u8 address[6]; + int:16; /* padding */ + + char state; + char reserved; + short age; + + char quality; + char rssi; + + struct obj_ssid ssid; + short channel; + char beacon_period; + char dtim_period; + short capinfo; + short rates; + short basic_rates; + int:16; /* padding */ +} __attribute__ ((packed)); + +struct obj_bsslist { + u32 nr; + struct obj_bss bsslist[0]; +} __attribute__ ((packed)); + +struct obj_frequencies { + u16 nr; + u16 mhz[0]; +} __attribute__ ((packed)); + +struct obj_attachment { + char type; + char reserved; + short id; + short size; + char data[0]; +} __attribute__((packed)); + +/* + * in case everything's ok, the inlined function below will be + * optimized away by the compiler... + */ +static inline void +__bug_on_wrong_struct_sizes(void) +{ + BUG_ON(sizeof (struct obj_ssid) != 34); + BUG_ON(sizeof (struct obj_key) != 34); + BUG_ON(sizeof (struct obj_mlme) != 12); + BUG_ON(sizeof (struct obj_mlmeex) != 14); + BUG_ON(sizeof (struct obj_buffer) != 8); + BUG_ON(sizeof (struct obj_bss) != 60); + BUG_ON(sizeof (struct obj_bsslist) != 4); + BUG_ON(sizeof (struct obj_frequencies) != 2); +} + +enum dot11_state_t { + DOT11_STATE_NONE = 0, + DOT11_STATE_AUTHING = 1, + DOT11_STATE_AUTH = 2, + DOT11_STATE_ASSOCING = 3, + + DOT11_STATE_ASSOC = 5, + DOT11_STATE_IBSS = 6, + DOT11_STATE_WDS = 7 +}; + +enum dot11_bsstype_t { + DOT11_BSSTYPE_NONE = 0, + DOT11_BSSTYPE_INFRA = 1, + DOT11_BSSTYPE_IBSS = 2, + DOT11_BSSTYPE_ANY = 3 +}; + +enum dot11_auth_t { + DOT11_AUTH_NONE = 0, + DOT11_AUTH_OS = 1, + DOT11_AUTH_SK = 2, + DOT11_AUTH_BOTH = 3 +}; + +enum dot11_mlme_t { + DOT11_MLME_AUTO = 0, + DOT11_MLME_INTERMEDIATE = 1, + DOT11_MLME_EXTENDED = 2 +}; + +enum dot11_priv_t { + DOT11_PRIV_WEP = 0, + DOT11_PRIV_TKIP = 1 +}; + +/* Prism "Nitro" / Frameburst / "Packet Frame Grouping" + * Value is in microseconds. Represents the # microseconds + * the firmware will take to group frames before sending out then out + * together with a CSMA contention. Without this all frames are + * sent with a CSMA contention. + * Bibliography: + * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html + */ +enum dot11_maxframeburst_t { + /* Values for DOT11_OID_MAXFRAMEBURST */ + DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */ + DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */ + DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */ + DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max, + * Note: firmware allows for greater values. This is a + * recommended max. I'll update this as I find + * out what the real MAX is. Also note that you don't necessarily + * get better results with a greater value here. + */ +}; + +/* Support for 802.11 long and short frame preambles. + * Long preamble uses 128-bit sync field, 8-bit CRC + * Short preamble uses 56-bit sync field, 16-bit CRC + * + * 802.11a -- not sure, both optionally ? + * 802.11b supports long and optionally short + * 802.11g supports both */ +enum dot11_preamblesettings_t { + DOT11_PREAMBLESETTING_LONG = 0, + /* Allows *only* long 802.11 preambles */ + DOT11_PREAMBLESETTING_SHORT = 1, + /* Allows *only* short 802.11 preambles */ + DOT11_PREAMBLESETTING_DYNAMIC = 2 + /* AutomatiGically set */ +}; + +/* Support for 802.11 slot timing (time between packets). + * + * Long uses 802.11a slot timing (9 usec ?) + * Short uses 802.11b slot timing (20 use ?) */ +enum dot11_slotsettings_t { + DOT11_SLOTSETTINGS_LONG = 0, + /* Allows *only* long 802.11b slot timing */ + DOT11_SLOTSETTINGS_SHORT = 1, + /* Allows *only* long 802.11a slot timing */ + DOT11_SLOTSETTINGS_DYNAMIC = 2 + /* AutomatiGically set */ +}; + +/* All you need to know, ERP is "Extended Rate PHY". + * An Extended Rate PHY (ERP) STA or AP shall support three different + * preamble and header formats: + * Long preamble (refer to above) + * Short preamble (refer to above) + * OFDM preamble ( ? ) + * + * I'm assuming here Protection tells the AP + * to be careful, a STA which cannot handle the long pre-amble + * has joined. + */ +enum do11_nonerpstatus_t { + DOT11_ERPSTAT_NONEPRESENT = 0, + DOT11_ERPSTAT_USEPROTECTION = 1 +}; + +/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-* + * The key here is DOT11 NON ERP NEVER protects against + * NON ERP STA's. You *don't* want this unless + * you know what you are doing. It means you will only + * get Extended Rate capabilities */ +enum dot11_nonerpprotection_t { + DOT11_NONERP_NEVER = 0, + DOT11_NONERP_ALWAYS = 1, + DOT11_NONERP_DYNAMIC = 2 +}; + +/* Preset OID configuration for 802.11 modes + * Note: DOT11_OID_CW[MIN|MAX] hold the values of the + * DCS MIN|MAX backoff used */ +enum dot11_profile_t { /* And set/allowed values */ + /* Allowed values for DOT11_OID_PROFILES */ + DOT11_PROFILE_B_ONLY = 0, + /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps + * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC + * DOT11_OID_CWMIN: 31 + * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC + * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG + */ + DOT11_PROFILE_MIXED_G_WIFI = 1, + /* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs + * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC + * DOT11_OID_CWMIN: 15 + * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC + * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC + */ + DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */ + /* Same as Profile MIXED_G_WIFI */ + DOT11_PROFILE_G_ONLY = 3, + /* Same as Profile MIXED_G_WIFI */ + DOT11_PROFILE_TEST = 4, + /* Same as Profile MIXED_G_WIFI except: + * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT + * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER + * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT + */ + DOT11_PROFILE_B_WIFI = 5, + /* Same as Profile B_ONLY */ + DOT11_PROFILE_A_ONLY = 6, + /* Same as Profile MIXED_G_WIFI except: + * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs + */ + DOT11_PROFILE_MIXED_SHORT = 7 + /* Same as MIXED_G_WIFI */ +}; + + +/* The dot11d conformance level configures the 802.11d conformance levels. + * The following conformance levels exist:*/ +enum oid_inl_conformance_t { + OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */ + OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */ + OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to + * determine channel AND/OR just make assumption that active + * channels are valid channels */ +}; + +enum oid_inl_mode_t { + INL_MODE_NONE = -1, + INL_MODE_PROMISCUOUS = 0, + INL_MODE_CLIENT = 1, + INL_MODE_AP = 2, + INL_MODE_SNIFFER = 3 +}; + +enum oid_inl_config_t { + INL_CONFIG_NOTHING = 0x00, + INL_CONFIG_MANUALRUN = 0x01, + INL_CONFIG_FRAMETRAP = 0x02, + INL_CONFIG_RXANNEX = 0x04, + INL_CONFIG_TXANNEX = 0x08, + INL_CONFIG_WDS = 0x10 +}; + +enum oid_inl_phycap_t { + INL_PHYCAP_2400MHZ = 1, + INL_PHYCAP_5000MHZ = 2, + INL_PHYCAP_FAA = 0x80000000, /* Means card supports the FAA switch */ +}; + + +enum oid_num_t { + GEN_OID_MACADDRESS = 0, + GEN_OID_LINKSTATE, + GEN_OID_WATCHDOG, + GEN_OID_MIBOP, + GEN_OID_OPTIONS, + GEN_OID_LEDCONFIG, + + /* 802.11 */ + DOT11_OID_BSSTYPE, + DOT11_OID_BSSID, + DOT11_OID_SSID, + DOT11_OID_STATE, + DOT11_OID_AID, + DOT11_OID_COUNTRYSTRING, + DOT11_OID_SSIDOVERRIDE, + + DOT11_OID_MEDIUMLIMIT, + DOT11_OID_BEACONPERIOD, + DOT11_OID_DTIMPERIOD, + DOT11_OID_ATIMWINDOW, + DOT11_OID_LISTENINTERVAL, + DOT11_OID_CFPPERIOD, + DOT11_OID_CFPDURATION, + + DOT11_OID_AUTHENABLE, + DOT11_OID_PRIVACYINVOKED, + DOT11_OID_EXUNENCRYPTED, + DOT11_OID_DEFKEYID, + DOT11_OID_DEFKEYX, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */ + DOT11_OID_STAKEY, + DOT11_OID_REKEYTHRESHOLD, + DOT11_OID_STASC, + + DOT11_OID_PRIVTXREJECTED, + DOT11_OID_PRIVRXPLAIN, + DOT11_OID_PRIVRXFAILED, + DOT11_OID_PRIVRXNOKEY, + + DOT11_OID_RTSTHRESH, + DOT11_OID_FRAGTHRESH, + DOT11_OID_SHORTRETRIES, + DOT11_OID_LONGRETRIES, + DOT11_OID_MAXTXLIFETIME, + DOT11_OID_MAXRXLIFETIME, + DOT11_OID_AUTHRESPTIMEOUT, + DOT11_OID_ASSOCRESPTIMEOUT, + + DOT11_OID_ALOFT_TABLE, + DOT11_OID_ALOFT_CTRL_TABLE, + DOT11_OID_ALOFT_RETREAT, + DOT11_OID_ALOFT_PROGRESS, + DOT11_OID_ALOFT_FIXEDRATE, + DOT11_OID_ALOFT_RSSIGRAPH, + DOT11_OID_ALOFT_CONFIG, + + DOT11_OID_VDCFX, + DOT11_OID_MAXFRAMEBURST, + + DOT11_OID_PSM, + DOT11_OID_CAMTIMEOUT, + DOT11_OID_RECEIVEDTIMS, + DOT11_OID_ROAMPREFERENCE, + + DOT11_OID_BRIDGELOCAL, + DOT11_OID_CLIENTS, + DOT11_OID_CLIENTSASSOCIATED, + DOT11_OID_CLIENTX, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */ + + DOT11_OID_CLIENTFIND, + DOT11_OID_WDSLINKADD, + DOT11_OID_WDSLINKREMOVE, + DOT11_OID_EAPAUTHSTA, + DOT11_OID_EAPUNAUTHSTA, + DOT11_OID_DOT1XENABLE, + DOT11_OID_MICFAILURE, + DOT11_OID_REKEYINDICATE, + + DOT11_OID_MPDUTXSUCCESSFUL, + DOT11_OID_MPDUTXONERETRY, + DOT11_OID_MPDUTXMULTIPLERETRIES, + DOT11_OID_MPDUTXFAILED, + DOT11_OID_MPDURXSUCCESSFUL, + DOT11_OID_MPDURXDUPS, + DOT11_OID_RTSSUCCESSFUL, + DOT11_OID_RTSFAILED, + DOT11_OID_ACKFAILED, + DOT11_OID_FRAMERECEIVES, + DOT11_OID_FRAMEERRORS, + DOT11_OID_FRAMEABORTS, + DOT11_OID_FRAMEABORTSPHY, + + DOT11_OID_SLOTTIME, + DOT11_OID_CWMIN, /* MIN DCS backoff */ + DOT11_OID_CWMAX, /* MAX DCS backoff */ + DOT11_OID_ACKWINDOW, + DOT11_OID_ANTENNARX, + DOT11_OID_ANTENNATX, + DOT11_OID_ANTENNADIVERSITY, + DOT11_OID_CHANNEL, + DOT11_OID_EDTHRESHOLD, + DOT11_OID_PREAMBLESETTINGS, + DOT11_OID_RATES, + DOT11_OID_CCAMODESUPPORTED, + DOT11_OID_CCAMODE, + DOT11_OID_RSSIVECTOR, + DOT11_OID_OUTPUTPOWERTABLE, + DOT11_OID_OUTPUTPOWER, + DOT11_OID_SUPPORTEDRATES, + DOT11_OID_FREQUENCY, + DOT11_OID_SUPPORTEDFREQUENCIES, + DOT11_OID_NOISEFLOOR, + DOT11_OID_FREQUENCYACTIVITY, + DOT11_OID_IQCALIBRATIONTABLE, + DOT11_OID_NONERPPROTECTION, + DOT11_OID_SLOTSETTINGS, + DOT11_OID_NONERPTIMEOUT, + DOT11_OID_PROFILES, + DOT11_OID_EXTENDEDRATES, + + DOT11_OID_DEAUTHENTICATE, + DOT11_OID_AUTHENTICATE, + DOT11_OID_DISASSOCIATE, + DOT11_OID_ASSOCIATE, + DOT11_OID_SCAN, + DOT11_OID_BEACON, + DOT11_OID_PROBE, + DOT11_OID_DEAUTHENTICATEEX, + DOT11_OID_AUTHENTICATEEX, + DOT11_OID_DISASSOCIATEEX, + DOT11_OID_ASSOCIATEEX, + DOT11_OID_REASSOCIATE, + DOT11_OID_REASSOCIATEEX, + + DOT11_OID_NONERPSTATUS, + + DOT11_OID_STATIMEOUT, + DOT11_OID_MLMEAUTOLEVEL, + DOT11_OID_BSSTIMEOUT, + DOT11_OID_ATTACHMENT, + DOT11_OID_PSMBUFFER, + + DOT11_OID_BSSS, + DOT11_OID_BSSX, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */ + DOT11_OID_BSSFIND, + DOT11_OID_BSSLIST, + + OID_INL_TUNNEL, + OID_INL_MEMADDR, + OID_INL_MEMORY, + OID_INL_MODE, + OID_INL_COMPONENT_NR, + OID_INL_VERSION, + OID_INL_INTERFACE_ID, + OID_INL_COMPONENT_ID, + OID_INL_CONFIG, + OID_INL_DOT11D_CONFORMANCE, + OID_INL_PHYCAPABILITIES, + OID_INL_OUTPUTPOWER, + + OID_NUM_LAST +}; + +#define OID_FLAG_CACHED 0x80 +#define OID_FLAG_TYPE 0x7f + +#define OID_TYPE_U32 0x01 +#define OID_TYPE_SSID 0x02 +#define OID_TYPE_KEY 0x03 +#define OID_TYPE_BUFFER 0x04 +#define OID_TYPE_BSS 0x05 +#define OID_TYPE_BSSLIST 0x06 +#define OID_TYPE_FREQUENCIES 0x07 +#define OID_TYPE_MLME 0x08 +#define OID_TYPE_MLMEEX 0x09 +#define OID_TYPE_ADDR 0x0A +#define OID_TYPE_RAW 0x0B +#define OID_TYPE_ATTACH 0x0C + +/* OID_TYPE_MLMEEX is special because of a variable size field when sending. + * Not yet implemented (not used in driver anyway). + */ + +struct oid_t { + enum oid_num_t oid; + short range; /* to define a range of oid */ + short size; /* max size of the associated data */ + char flags; +}; + +union oid_res_t { + void *ptr; + u32 u; +}; + +#define IWMAX_BITRATES 20 +#define IWMAX_BSS 24 +#define IWMAX_FREQ 30 +#define PRIV_STR_SIZE 1024 + +#endif /* !defined(_ISL_OID_H) */ +/* EOF */ diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c new file mode 100644 index 00000000000..efab07e9e24 --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -0,0 +1,956 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/version.h> +#include <linux/module.h> + +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/if_arp.h> + +#include <asm/io.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "isl_ioctl.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" +#include "islpci_eth.h" +#include "oid_mgt.h" + +#define ISL3877_IMAGE_FILE "isl3877" +#define ISL3886_IMAGE_FILE "isl3886" +#define ISL3890_IMAGE_FILE "isl3890" + +static int prism54_bring_down(islpci_private *); +static int islpci_alloc_memory(islpci_private *); +static struct net_device_stats *islpci_statistics(struct net_device *); + +/* Temporary dummy MAC address to use until firmware is loaded. + * The idea there is that some tools (such as nameif) may query + * the MAC address before the netdev is 'open'. By using a valid + * OUI prefix, they can process the netdev properly. + * Of course, this is not the final/real MAC address. It doesn't + * matter, as you are suppose to be able to change it anytime via + * ndev->set_mac_address. Jean II */ +static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 }; + +static int +isl_upload_firmware(islpci_private *priv) +{ + u32 reg, rc; + void __iomem *device_base = priv->device_base; + + /* clear the RAMBoot and the Reset bit */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + reg &= ~ISL38XX_CTRL_STAT_RESET; + reg &= ~ISL38XX_CTRL_STAT_RAMBOOT; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the Reset bit without reading the register ! */ + reg |= ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* clear the Reset bit */ + reg &= ~ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + + /* wait a while for the device to reboot */ + mdelay(50); + + { + const struct firmware *fw_entry = NULL; + long fw_len; + const u32 *fw_ptr; + + rc = request_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV); + if (rc) { + printk(KERN_ERR + "%s: request_firmware() failed for '%s'\n", + "prism54", priv->firmware); + return rc; + } + /* prepare the Direct Memory Base register */ + reg = ISL38XX_DEV_FIRMWARE_ADDRES; + + fw_ptr = (u32 *) fw_entry->data; + fw_len = fw_entry->size; + + if (fw_len % 4) { + printk(KERN_ERR + "%s: firmware '%s' size is not multiple of 32bit, aborting!\n", + "prism54", priv->firmware); + release_firmware(fw_entry); + return -EILSEQ; /* Illegal byte sequence */; + } + + while (fw_len > 0) { + long _fw_len = + (fw_len > + ISL38XX_MEMORY_WINDOW_SIZE) ? + ISL38XX_MEMORY_WINDOW_SIZE : fw_len; + u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN; + + /* set the cards base address for writting the data */ + isl38xx_w32_flush(device_base, reg, + ISL38XX_DIR_MEM_BASE_REG); + wmb(); /* be paranoid */ + + /* increment the write address for next iteration */ + reg += _fw_len; + fw_len -= _fw_len; + + /* write the data to the Direct Memory Window 32bit-wise */ + /* memcpy_toio() doesn't guarantee 32bit writes :-| */ + while (_fw_len > 0) { + /* use non-swapping writel() */ + __raw_writel(*fw_ptr, dev_fw_ptr); + fw_ptr++, dev_fw_ptr++; + _fw_len -= 4; + } + + /* flush PCI posting */ + (void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH); + wmb(); /* be paranoid again */ + + BUG_ON(_fw_len != 0); + } + + BUG_ON(fw_len != 0); + + /* Firmware version is at offset 40 (also for "newmac") */ + printk(KERN_DEBUG "%s: firmware version: %.8s\n", + priv->ndev->name, fw_entry->data + 40); + + release_firmware(fw_entry); + } + + /* now reset the device + * clear the Reset & ClkRun bit, set the RAMBoot bit */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + reg &= ~ISL38XX_CTRL_STAT_CLKRUN; + reg &= ~ISL38XX_CTRL_STAT_RESET; + reg |= ISL38XX_CTRL_STAT_RAMBOOT; + isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the reset bit latches the host override and RAMBoot bits + * into the device for operation when the reset bit is reset */ + reg |= ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + /* don't do flush PCI posting here! */ + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* clear the reset bit should start the whole circus */ + reg &= ~ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + /* don't do flush PCI posting here! */ + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + return 0; +} + +/****************************************************************************** + Device Interrupt Handler +******************************************************************************/ + +irqreturn_t +islpci_interrupt(int irq, void *config, struct pt_regs *regs) +{ + u32 reg; + islpci_private *priv = config; + struct net_device *ndev = priv->ndev; + void __iomem *device = priv->device_base; + int powerstate = ISL38XX_PSM_POWERSAVE_STATE; + + /* lock the interrupt handler */ + spin_lock(&priv->slock); + + /* received an interrupt request on a shared IRQ line + * first check whether the device is in sleep mode */ + reg = readl(device + ISL38XX_CTRL_STAT_REG); + if (reg & ISL38XX_CTRL_STAT_SLEEPMODE) + /* device is in sleep mode, IRQ was generated by someone else */ + { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n"); +#endif + spin_unlock(&priv->slock); + return IRQ_NONE; + } + + + /* check whether there is any source of interrupt on the device */ + reg = readl(device + ISL38XX_INT_IDENT_REG); + + /* also check the contents of the Interrupt Enable Register, because this + * will filter out interrupt sources from other devices on the same irq ! */ + reg &= readl(device + ISL38XX_INT_EN_REG); + reg &= ISL38XX_INT_SOURCES; + + if (reg != 0) { + if (islpci_get_state(priv) != PRV_STATE_SLEEP) + powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* reset the request bits in the Identification register */ + isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, + "IRQ: Identification register 0x%p 0x%x \n", device, reg); +#endif + + /* check for each bit in the register separately */ + if (reg & ISL38XX_INT_IDENT_UPDATE) { +#if VERBOSE > SHOW_ERROR_MESSAGES + /* Queue has been updated */ + DEBUG(SHOW_TRACING, "IRQ: Update flag \n"); + + DEBUG(SHOW_QUEUE_INDEXES, + "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n", + le32_to_cpu(priv->control_block-> + driver_curr_frag[0]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[1]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[2]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[3]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[4]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[5]) + ); + + DEBUG(SHOW_QUEUE_INDEXES, + "CB dev Qs: [%i][%i][%i][%i][%i][%i]\n", + le32_to_cpu(priv->control_block-> + device_curr_frag[0]), + le32_to_cpu(priv->control_block-> + device_curr_frag[1]), + le32_to_cpu(priv->control_block-> + device_curr_frag[2]), + le32_to_cpu(priv->control_block-> + device_curr_frag[3]), + le32_to_cpu(priv->control_block-> + device_curr_frag[4]), + le32_to_cpu(priv->control_block-> + device_curr_frag[5]) + ); +#endif + + /* cleanup the data low transmit queue */ + islpci_eth_cleanup_transmit(priv, priv->control_block); + + /* device is in active state, update the + * powerstate flag if necessary */ + powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* check all three queues in priority order + * call the PIMFOR receive function until the + * queue is empty */ + if (isl38xx_in_queue(priv->control_block, + ISL38XX_CB_RX_MGMTQ) != 0) { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "Received frame in Management Queue\n"); +#endif + islpci_mgt_receive(ndev); + + islpci_mgt_cleanup_transmit(ndev); + + /* Refill slots in receive queue */ + islpci_mgmt_rx_fill(ndev); + + /* no need to trigger the device, next + islpci_mgt_transaction does it */ + } + + while (isl38xx_in_queue(priv->control_block, + ISL38XX_CB_RX_DATA_LQ) != 0) { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "Received frame in Data Low Queue \n"); +#endif + islpci_eth_receive(priv); + } + + /* check whether the data transmit queues were full */ + if (priv->data_low_tx_full) { + /* check whether the transmit is not full anymore */ + if (ISL38XX_CB_TX_QSIZE - + isl38xx_in_queue(priv->control_block, + ISL38XX_CB_TX_DATA_LQ) >= + ISL38XX_MIN_QTHRESHOLD) { + /* nope, the driver is ready for more network frames */ + netif_wake_queue(priv->ndev); + + /* reset the full flag */ + priv->data_low_tx_full = 0; + } + } + } + + if (reg & ISL38XX_INT_IDENT_INIT) { + /* Device has been initialized */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "IRQ: Init flag, device initialized \n"); +#endif + wake_up(&priv->reset_done); + } + + if (reg & ISL38XX_INT_IDENT_SLEEP) { + /* Device intends to move to powersave state */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n"); +#endif + isl38xx_handle_sleep_request(priv->control_block, + &powerstate, + priv->device_base); + } + + if (reg & ISL38XX_INT_IDENT_WAKEUP) { + /* Device has been woken up to active state */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n"); +#endif + + isl38xx_handle_wakeup(priv->control_block, + &powerstate, priv->device_base); + } + } else { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n"); +#endif + spin_unlock(&priv->slock); + return IRQ_NONE; + } + + /* sleep -> ready */ + if (islpci_get_state(priv) == PRV_STATE_SLEEP + && powerstate == ISL38XX_PSM_ACTIVE_STATE) + islpci_set_state(priv, PRV_STATE_READY); + + /* !sleep -> sleep */ + if (islpci_get_state(priv) != PRV_STATE_SLEEP + && powerstate == ISL38XX_PSM_POWERSAVE_STATE) + islpci_set_state(priv, PRV_STATE_SLEEP); + + /* unlock the interrupt handler */ + spin_unlock(&priv->slock); + + return IRQ_HANDLED; +} + +/****************************************************************************** + Network Interface Control & Statistical functions +******************************************************************************/ +static int +islpci_open(struct net_device *ndev) +{ + u32 rc; + islpci_private *priv = netdev_priv(ndev); + + /* reset data structures, upload firmware and reset device */ + rc = islpci_reset(priv,1); + if (rc) { + prism54_bring_down(priv); + return rc; /* Returns informative message */ + } + + netif_start_queue(ndev); +/* netif_mark_up( ndev ); */ + + return 0; +} + +static int +islpci_close(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + + printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name); + + netif_stop_queue(ndev); + + return prism54_bring_down(priv); +} + +static int +prism54_bring_down(islpci_private *priv) +{ + void __iomem *device_base = priv->device_base; + u32 reg; + /* we are going to shutdown the device */ + islpci_set_state(priv, PRV_STATE_PREBOOT); + + /* disable all device interrupts in case they weren't */ + isl38xx_disable_interrupts(priv->device_base); + + /* For safety reasons, we may want to ensure that no DMA transfer is + * currently in progress by emptying the TX and RX queues. */ + + /* wait until interrupts have finished executing on other CPUs */ + synchronize_irq(priv->pdev->irq); + + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT); + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + reg |= ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* clear the Reset bit */ + reg &= ~ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + + /* wait a while for the device to reset */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(50*HZ/1000); + + return 0; +} + +static int +islpci_upload_fw(islpci_private *priv) +{ + islpci_state_t old_state; + u32 rc; + + old_state = islpci_set_state(priv, PRV_STATE_BOOT); + + printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name); + + rc = isl_upload_firmware(priv); + if (rc) { + /* error uploading the firmware */ + printk(KERN_ERR "%s: could not upload firmware ('%s')\n", + priv->ndev->name, priv->firmware); + + islpci_set_state(priv, old_state); + return rc; + } + + printk(KERN_DEBUG "%s: firmware upload complete\n", + priv->ndev->name); + + islpci_set_state(priv, PRV_STATE_POSTBOOT); + + return 0; +} + +static int +islpci_reset_if(islpci_private *priv) +{ + long remaining; + int result = -ETIME; + int count; + + DEFINE_WAIT(wait); + prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE); + + /* now the last step is to reset the interface */ + isl38xx_interface_reset(priv->device_base, priv->device_host_address); + islpci_set_state(priv, PRV_STATE_PREINIT); + + for(count = 0; count < 2 && result; count++) { + /* The software reset acknowledge needs about 220 msec here. + * Be conservative and wait for up to one second. */ + + set_current_state(TASK_UNINTERRUPTIBLE); + remaining = schedule_timeout(HZ); + + if(remaining > 0) { + result = 0; + break; + } + + /* If we're here it's because our IRQ hasn't yet gone through. + * Retry a bit more... + */ + printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n", + priv->ndev->name); + } + + finish_wait(&priv->reset_done, &wait); + + if (result) { + printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); + return result; + } + + islpci_set_state(priv, PRV_STATE_INIT); + + /* Now that the device is 100% up, let's allow + * for the other interrupts -- + * NOTE: this is not *yet* true since we've only allowed the + * INIT interrupt on the IRQ line. We can perhaps poll + * the IRQ line until we know for sure the reset went through */ + isl38xx_enable_common_interrupts(priv->device_base); + + down_write(&priv->mib_sem); + result = mgt_commit(priv); + if (result) { + printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); + up_write(&priv->mib_sem); + return result; + } + up_write(&priv->mib_sem); + + islpci_set_state(priv, PRV_STATE_READY); + + printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name); + return 0; +} + +int +islpci_reset(islpci_private *priv, int reload_firmware) +{ + isl38xx_control_block *cb = /* volatile not needed */ + (isl38xx_control_block *) priv->control_block; + unsigned counter; + int rc; + + if (reload_firmware) + islpci_set_state(priv, PRV_STATE_PREBOOT); + else + islpci_set_state(priv, PRV_STATE_POSTBOOT); + + printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name); + + /* disable all device interrupts in case they weren't */ + isl38xx_disable_interrupts(priv->device_base); + + /* flush all management queues */ + priv->index_mgmt_tx = 0; + priv->index_mgmt_rx = 0; + + /* clear the indexes in the frame pointer */ + for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) { + cb->driver_curr_frag[counter] = cpu_to_le32(0); + cb->device_curr_frag[counter] = cpu_to_le32(0); + } + + /* reset the mgmt receive queue */ + for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) { + isl38xx_fragment *frag = &cb->rx_data_mgmt[counter]; + frag->size = cpu_to_le16(MGMT_FRAME_SIZE); + frag->flags = 0; + frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr); + } + + for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { + cb->rx_data_low[counter].address = + cpu_to_le32((u32) priv->pci_map_rx_address[counter]); + } + + /* since the receive queues are filled with empty fragments, now we can + * set the corresponding indexes in the Control Block */ + priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] = + cpu_to_le32(ISL38XX_CB_RX_QSIZE); + priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = + cpu_to_le32(ISL38XX_CB_MGMT_QSIZE); + + /* reset the remaining real index registers and full flags */ + priv->free_data_rx = 0; + priv->free_data_tx = 0; + priv->data_low_tx_full = 0; + + if (reload_firmware) { /* Should we load the firmware ? */ + /* now that the data structures are cleaned up, upload + * firmware and reset interface */ + rc = islpci_upload_fw(priv); + if (rc) { + printk(KERN_ERR "%s: islpci_reset: failure\n", + priv->ndev->name); + return rc; + } + } + + /* finally reset interface */ + rc = islpci_reset_if(priv); + if (rc) + printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n"); + return rc; +} + +static struct net_device_stats * +islpci_statistics(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_statistics\n"); +#endif + + return &priv->statistics; +} + +/****************************************************************************** + Network device configuration functions +******************************************************************************/ +static int +islpci_alloc_memory(islpci_private *priv) +{ + int counter; + +#if VERBOSE > SHOW_ERROR_MESSAGES + printk(KERN_DEBUG "islpci_alloc_memory\n"); +#endif + + /* remap the PCI device base address to accessable */ + if (!(priv->device_base = + ioremap(pci_resource_start(priv->pdev, 0), + ISL38XX_PCI_MEM_SIZE))) { + /* error in remapping the PCI device memory address range */ + printk(KERN_ERR "PCI memory remapping failed \n"); + return -1; + } + + /* memory layout for consistent DMA region: + * + * Area 1: Control Block for the device interface + * Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that + * the number of supported stations in the AP determines the minimal + * size of the buffer ! + */ + + /* perform the allocation */ + priv->driver_mem_address = pci_alloc_consistent(priv->pdev, + HOST_MEM_BLOCK, + &priv-> + device_host_address); + + if (!priv->driver_mem_address) { + /* error allocating the block of PCI memory */ + printk(KERN_ERR "%s: could not allocate DMA memory, aborting!", + "prism54"); + return -1; + } + + /* assign the Control Block to the first address of the allocated area */ + priv->control_block = + (isl38xx_control_block *) priv->driver_mem_address; + + /* set the Power Save Buffer pointer directly behind the CB */ + priv->device_psm_buffer = + priv->device_host_address + CONTROL_BLOCK_SIZE; + + /* make sure all buffer pointers are initialized */ + for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) { + priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0); + priv->control_block->device_curr_frag[counter] = cpu_to_le32(0); + } + + priv->index_mgmt_rx = 0; + memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx)); + memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx)); + + /* allocate rx queue for management frames */ + if (islpci_mgmt_rx_fill(priv->ndev) < 0) + goto out_free; + + /* now get the data rx skb's */ + memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx)); + memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address)); + + for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { + struct sk_buff *skb; + + /* allocate an sk_buff for received data frames storage + * each frame on receive size consists of 1 fragment + * include any required allignment operations */ + if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) { + /* error allocating an sk_buff structure elements */ + printk(KERN_ERR "Error allocating skb.\n"); + skb = NULL; + goto out_free; + } + skb_reserve(skb, (4 - (long) skb->data) & 0x03); + /* add the new allocated sk_buff to the buffer array */ + priv->data_low_rx[counter] = skb; + + /* map the allocated skb data area to pci */ + priv->pci_map_rx_address[counter] = + pci_map_single(priv->pdev, (void *) skb->data, + MAX_FRAGMENT_SIZE_RX + 2, + PCI_DMA_FROMDEVICE); + if (!priv->pci_map_rx_address[counter]) { + /* error mapping the buffer to device + accessable memory address */ + printk(KERN_ERR "failed to map skb DMA'able\n"); + goto out_free; + } + } + + prism54_acl_init(&priv->acl); + prism54_wpa_ie_init(priv); + if (mgt_init(priv)) + goto out_free; + + return 0; + out_free: + islpci_free_memory(priv); + return -1; +} + +int +islpci_free_memory(islpci_private *priv) +{ + int counter; + + if (priv->device_base) + iounmap(priv->device_base); + priv->device_base = NULL; + + /* free consistent DMA area... */ + if (priv->driver_mem_address) + pci_free_consistent(priv->pdev, HOST_MEM_BLOCK, + priv->driver_mem_address, + priv->device_host_address); + + /* clear some dangling pointers */ + priv->driver_mem_address = NULL; + priv->device_host_address = 0; + priv->device_psm_buffer = 0; + priv->control_block = NULL; + + /* clean up mgmt rx buffers */ + for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) { + struct islpci_membuf *buf = &priv->mgmt_rx[counter]; + if (buf->pci_addr) + pci_unmap_single(priv->pdev, buf->pci_addr, + buf->size, PCI_DMA_FROMDEVICE); + buf->pci_addr = 0; + if (buf->mem) + kfree(buf->mem); + buf->size = 0; + buf->mem = NULL; + } + + /* clean up data rx buffers */ + for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { + if (priv->pci_map_rx_address[counter]) + pci_unmap_single(priv->pdev, + priv->pci_map_rx_address[counter], + MAX_FRAGMENT_SIZE_RX + 2, + PCI_DMA_FROMDEVICE); + priv->pci_map_rx_address[counter] = 0; + + if (priv->data_low_rx[counter]) + dev_kfree_skb(priv->data_low_rx[counter]); + priv->data_low_rx[counter] = NULL; + } + + /* Free the acces control list and the WPA list */ + prism54_acl_clean(&priv->acl); + prism54_wpa_ie_clean(priv); + mgt_clean(priv); + + return 0; +} + +#if 0 +static void +islpci_set_multicast_list(struct net_device *dev) +{ + /* put device into promisc mode and let network layer handle it */ +} +#endif + +struct net_device * +islpci_setup(struct pci_dev *pdev) +{ + islpci_private *priv; + struct net_device *ndev = alloc_etherdev(sizeof (islpci_private)); + + if (!ndev) + return ndev; + + SET_MODULE_OWNER(ndev); + pci_set_drvdata(pdev, ndev); +#if defined(SET_NETDEV_DEV) + SET_NETDEV_DEV(ndev, &pdev->dev); +#endif + + /* setup the structure members */ + ndev->base_addr = pci_resource_start(pdev, 0); + ndev->irq = pdev->irq; + + /* initialize the function pointers */ + ndev->open = &islpci_open; + ndev->stop = &islpci_close; + ndev->get_stats = &islpci_statistics; + ndev->get_wireless_stats = &prism54_get_wireless_stats; + ndev->do_ioctl = &prism54_ioctl; + ndev->wireless_handlers = + (struct iw_handler_def *) &prism54_handler_def; + + ndev->hard_start_xmit = &islpci_eth_transmit; + /* ndev->set_multicast_list = &islpci_set_multicast_list; */ + ndev->addr_len = ETH_ALEN; + ndev->set_mac_address = &prism54_set_mac_address; + /* Get a non-zero dummy MAC address for nameif. Jean II */ + memcpy(ndev->dev_addr, dummy_mac, 6); + +#ifdef HAVE_TX_TIMEOUT + ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT; + ndev->tx_timeout = &islpci_eth_tx_timeout; +#endif + + /* allocate a private device structure to the network device */ + priv = netdev_priv(ndev); + priv->ndev = ndev; + priv->pdev = pdev; + priv->monitor_type = ARPHRD_IEEE80211; + priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ? + priv->monitor_type : ARPHRD_ETHER; + +#if WIRELESS_EXT > 16 + /* Add pointers to enable iwspy support. */ + priv->wireless_data.spy_data = &priv->spy_data; + ndev->wireless_data = &priv->wireless_data; +#endif /* WIRELESS_EXT > 16 */ + + /* save the start and end address of the PCI memory area */ + ndev->mem_start = (unsigned long) priv->device_base; + ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base); +#endif + + init_waitqueue_head(&priv->reset_done); + + /* init the queue read locks, process wait counter */ + sema_init(&priv->mgmt_sem, 1); + priv->mgmt_received = NULL; + init_waitqueue_head(&priv->mgmt_wqueue); + sema_init(&priv->stats_sem, 1); + spin_lock_init(&priv->slock); + + /* init state machine with off#1 state */ + priv->state = PRV_STATE_OFF; + priv->state_off = 1; + + /* initialize workqueue's */ + INIT_WORK(&priv->stats_work, + (void (*)(void *)) prism54_update_stats, priv); + priv->stats_timestamp = 0; + + INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake, priv); + priv->reset_task_pending = 0; + + /* allocate various memory areas */ + if (islpci_alloc_memory(priv)) + goto do_free_netdev; + + /* select the firmware file depending on the device id */ + switch (pdev->device) { + case 0x3877: + strcpy(priv->firmware, ISL3877_IMAGE_FILE); + break; + + case 0x3886: + strcpy(priv->firmware, ISL3886_IMAGE_FILE); + break; + + default: + strcpy(priv->firmware, ISL3890_IMAGE_FILE); + break; + } + + if (register_netdev(ndev)) { + DEBUG(SHOW_ERROR_MESSAGES, + "ERROR: register_netdev() failed \n"); + goto do_islpci_free_memory; + } + + return ndev; + + do_islpci_free_memory: + islpci_free_memory(priv); + do_free_netdev: + pci_set_drvdata(pdev, NULL); + free_netdev(ndev); + priv = NULL; + return NULL; +} + +islpci_state_t +islpci_set_state(islpci_private *priv, islpci_state_t new_state) +{ + islpci_state_t old_state; + + /* lock */ + old_state = priv->state; + + /* this means either a race condition or some serious error in + * the driver code */ + switch (new_state) { + case PRV_STATE_OFF: + priv->state_off++; + default: + priv->state = new_state; + break; + + case PRV_STATE_PREBOOT: + /* there are actually many off-states, enumerated by + * state_off */ + if (old_state == PRV_STATE_OFF) + priv->state_off--; + + /* only if hw_unavailable is zero now it means we either + * were in off#1 state, or came here from + * somewhere else */ + if (!priv->state_off) + priv->state = new_state; + break; + }; +#if 0 + printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n", + priv->ndev->name, old_state, new_state, priv->state_off); +#endif + + /* invariants */ + BUG_ON(priv->state_off < 0); + BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF)); + BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF)); + + /* unlock */ + return old_state; +} diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h new file mode 100644 index 00000000000..32a1019f1b3 --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_dev.h @@ -0,0 +1,216 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ISLPCI_DEV_H +#define _ISLPCI_DEV_H + +#include <linux/version.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <linux/list.h> + +#include "isl_38xx.h" +#include "isl_oid.h" +#include "islpci_mgt.h" + +/* some states might not be superflous and may be removed when + design is finalized (hvr) */ +typedef enum { + PRV_STATE_OFF = 0, /* this means hw_unavailable is != 0 */ + PRV_STATE_PREBOOT, /* we are in a pre-boot state (empty RAM) */ + PRV_STATE_BOOT, /* boot state (fw upload, run fw) */ + PRV_STATE_POSTBOOT, /* after boot state, need reset now */ + PRV_STATE_PREINIT, /* pre-init state */ + PRV_STATE_INIT, /* init state (restore MIB backup to device) */ + PRV_STATE_READY, /* driver&device are in operational state */ + PRV_STATE_SLEEP /* device in sleep mode */ +} islpci_state_t; + +/* ACL using MAC address */ +struct mac_entry { + struct list_head _list; + char addr[ETH_ALEN]; +}; + +struct islpci_acl { + enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy; + struct list_head mac_list; /* a list of mac_entry */ + int size; /* size of queue */ + struct semaphore sem; /* accessed in ioctls and trap_work */ +}; + +struct islpci_membuf { + int size; /* size of memory */ + void *mem; /* address of memory as seen by CPU */ + dma_addr_t pci_addr; /* address of memory as seen by device */ +}; + +#define MAX_BSS_WPA_IE_COUNT 64 +#define MAX_WPA_IE_LEN 64 +struct islpci_bss_wpa_ie { + struct list_head list; + unsigned long last_update; + u8 bssid[ETH_ALEN]; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + +}; + +typedef struct { + spinlock_t slock; /* generic spinlock; */ + + u32 priv_oid; + + /* our mib cache */ + u32 iw_mode; + struct rw_semaphore mib_sem; + void **mib; + char nickname[IW_ESSID_MAX_SIZE+1]; + + /* Take care of the wireless stats */ + struct work_struct stats_work; + struct semaphore stats_sem; + /* remember when we last updated the stats */ + unsigned long stats_timestamp; + /* The first is accessed under semaphore locking. + * The second is the clean one we return to iwconfig. + */ + struct iw_statistics local_iwstatistics; + struct iw_statistics iwstatistics; + + struct iw_spy_data spy_data; /* iwspy support */ + +#if WIRELESS_EXT > 16 + struct iw_public_data wireless_data; +#endif /* WIRELESS_EXT > 16 */ + + int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ + + struct islpci_acl acl; + + /* PCI bus allocation & configuration members */ + struct pci_dev *pdev; /* PCI structure information */ + char firmware[33]; + + void __iomem *device_base; /* ioremapped device base address */ + + /* consistent DMA region */ + void *driver_mem_address; /* base DMA address */ + dma_addr_t device_host_address; /* base DMA address (bus address) */ + dma_addr_t device_psm_buffer; /* host memory for PSM buffering (bus address) */ + + /* our network_device structure */ + struct net_device *ndev; + + /* device queue interface members */ + struct isl38xx_cb *control_block; /* device control block + (== driver_mem_address!) */ + + /* Each queue has three indexes: + * free/index_mgmt/data_rx/tx (called index, see below), + * driver_curr_frag, and device_curr_frag (in the control block) + * All indexes are ever-increasing, but interpreted modulo the + * device queue size when used. + * index <= device_curr_frag <= driver_curr_frag at all times + * For rx queues, [index, device_curr_frag) contains fragments + * that the interrupt processing needs to handle (owned by driver). + * [device_curr_frag, driver_curr_frag) is the free space in the + * rx queue, waiting for data (owned by device). The driver + * increments driver_curr_frag to indicate to the device that more + * buffers are available. + * If device_curr_frag == driver_curr_frag, no more rx buffers are + * available, and the rx DMA engine of the device is halted. + * For tx queues, [index, device_curr_frag) contains fragments + * where tx is done; they need to be freed (owned by driver). + * [device_curr_frag, driver_curr_frag) contains the frames + * that are being transferred (owned by device). The driver + * increments driver_curr_frag to indicate that more tx work + * needs to be done. + */ + u32 index_mgmt_rx; /* real index mgmt rx queue */ + u32 index_mgmt_tx; /* read index mgmt tx queue */ + u32 free_data_rx; /* free pointer data rx queue */ + u32 free_data_tx; /* free pointer data tx queue */ + u32 data_low_tx_full; /* full detected flag */ + + /* frame memory buffers for the device queues */ + struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE]; + struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE]; + struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE]; + struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE]; + dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE]; + dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE]; + + /* driver network interface members */ + struct net_device_stats statistics; + + /* wait for a reset interrupt */ + wait_queue_head_t reset_done; + + /* used by islpci_mgt_transaction */ + struct semaphore mgmt_sem; /* serialize access to mailbox and wqueue */ + struct islpci_mgmtframe *mgmt_received; /* mbox for incoming frame */ + wait_queue_head_t mgmt_wqueue; /* waitqueue for mbox */ + + /* state machine */ + islpci_state_t state; + int state_off; /* enumeration of off-state, if 0 then + * we're not in any off-state */ + + /* WPA stuff */ + int wpa; /* WPA mode enabled */ + struct list_head bss_wpa_list; + int num_bss_wpa; + struct semaphore wpa_sem; + + struct work_struct reset_task; + int reset_task_pending; +} islpci_private; + +static inline islpci_state_t +islpci_get_state(islpci_private *priv) +{ + /* lock */ + return priv->state; + /* unlock */ +} + +islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state); + +#define ISLPCI_TX_TIMEOUT (2*HZ) + +irqreturn_t islpci_interrupt(int, void *, struct pt_regs *); + +int prism54_post_setup(islpci_private *, int); +int islpci_reset(islpci_private *, int); + +static inline void +islpci_trigger(islpci_private *priv) +{ + isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP, + priv->device_base); +} + +int islpci_free_memory(islpci_private *); +struct net_device *islpci_setup(struct pci_dev *); +#endif /* _ISLPCI_DEV_H */ diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c new file mode 100644 index 00000000000..5952e996049 --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -0,0 +1,519 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/version.h> +#include <linux/module.h> + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_eth.h" +#include "islpci_mgt.h" +#include "oid_mgt.h" + +/****************************************************************************** + Network Interface functions +******************************************************************************/ +void +islpci_eth_cleanup_transmit(islpci_private *priv, + isl38xx_control_block *control_block) +{ + struct sk_buff *skb; + u32 index; + + /* compare the control block read pointer with the free pointer */ + while (priv->free_data_tx != + le32_to_cpu(control_block-> + device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) { + /* read the index of the first fragment to be freed */ + index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE; + + /* check for holes in the arrays caused by multi fragment frames + * searching for the last fragment of a frame */ + if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) { + /* entry is the last fragment of a frame + * free the skb structure and unmap pci memory */ + skb = priv->data_low_tx[index]; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "cleanup skb %p skb->data %p skb->len %u truesize %u\n ", + skb, skb->data, skb->len, skb->truesize); +#endif + + pci_unmap_single(priv->pdev, + priv->pci_map_tx_address[index], + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + skb = NULL; + } + /* increment the free data low queue pointer */ + priv->free_data_tx++; + } +} + +int +islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = priv->control_block; + u32 index; + dma_addr_t pci_map_address; + int frame_size; + isl38xx_fragment *fragment; + int offset; + struct sk_buff *newskb; + int newskb_offset; + unsigned long flags; + unsigned char wds_mac[6]; + u32 curr_frag; + int err = 0; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n"); +#endif + + /* lock the driver code */ + spin_lock_irqsave(&priv->slock, flags); + + /* determine the amount of fragments needed to store the frame */ + + frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + if (init_wds) + frame_size += 6; + + /* check whether the destination queue has enough fragments for the frame */ + curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]); + if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) { + printk(KERN_ERR "%s: transmit device queue full when awake\n", + ndev->name); + netif_stop_queue(ndev); + + /* trigger the device */ + isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + err = -EBUSY; + goto drop_free; + } + /* Check alignment and WDS frame formatting. The start of the packet should + * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes + * and add WDS address information */ + if (likely(((long) skb->data & 0x03) | init_wds)) { + /* get the number of bytes to add and re-allign */ + offset = (4 - (long) skb->data) & 0x03; + offset += init_wds ? 6 : 0; + + /* check whether the current skb can be used */ + if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) { + unsigned char *src = skb->data; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset, + init_wds); +#endif + + /* align the buffer on 4-byte boundary */ + skb_reserve(skb, (4 - (long) skb->data) & 0x03); + if (init_wds) { + /* wds requires an additional address field of 6 bytes */ + skb_put(skb, 6); +#ifdef ISLPCI_ETH_DEBUG + printk("islpci_eth_transmit:wds_mac\n"); +#endif + memmove(skb->data + 6, src, skb->len); + memcpy(skb->data, wds_mac, 6); + } else { + memmove(skb->data, src, skb->len); + } + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data, + src, skb->len); +#endif + } else { + newskb = + dev_alloc_skb(init_wds ? skb->len + 6 : skb->len); + if (unlikely(newskb == NULL)) { + printk(KERN_ERR "%s: Cannot allocate skb\n", + ndev->name); + err = -ENOMEM; + goto drop_free; + } + newskb_offset = (4 - (long) newskb->data) & 0x03; + + /* Check if newskb->data is aligned */ + if (newskb_offset) + skb_reserve(newskb, newskb_offset); + + skb_put(newskb, init_wds ? skb->len + 6 : skb->len); + if (init_wds) { + memcpy(newskb->data + 6, skb->data, skb->len); + memcpy(newskb->data, wds_mac, 6); +#ifdef ISLPCI_ETH_DEBUG + printk("islpci_eth_transmit:wds_mac\n"); +#endif + } else + memcpy(newskb->data, skb->data, skb->len); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n", + newskb->data, skb->data, skb->len, init_wds); +#endif + + newskb->dev = skb->dev; + dev_kfree_skb(skb); + skb = newskb; + } + } + /* display the buffer contents for debugging */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data); + display_buffer((char *) skb->data, skb->len); +#endif + + /* map the skb buffer to pci memory for DMA operation */ + pci_map_address = pci_map_single(priv->pdev, + (void *) skb->data, skb->len, + PCI_DMA_TODEVICE); + if (unlikely(pci_map_address == 0)) { + printk(KERN_WARNING "%s: cannot map buffer to PCI\n", + ndev->name); + + err = -EIO; + goto drop_free; + } + /* Place the fragment in the control block structure. */ + index = curr_frag % ISL38XX_CB_TX_QSIZE; + fragment = &cb->tx_data_low[index]; + + priv->pci_map_tx_address[index] = pci_map_address; + /* store the skb address for future freeing */ + priv->data_low_tx[index] = skb; + /* set the proper fragment start address and size information */ + fragment->size = cpu_to_le16(frame_size); + fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */ + fragment->address = cpu_to_le32(pci_map_address); + curr_frag++; + + /* The fragment address in the control block must have been + * written before announcing the frame buffer to device. */ + wmb(); + cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag); + + if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD + > ISL38XX_CB_TX_QSIZE) { + /* stop sends from upper layers */ + netif_stop_queue(ndev); + + /* set the full flag for the transmission queue */ + priv->data_low_tx_full = 1; + } + + /* trigger the device */ + islpci_trigger(priv); + + /* unlock the driver code */ + spin_unlock_irqrestore(&priv->slock, flags); + + /* set the transmission time */ + ndev->trans_start = jiffies; + priv->statistics.tx_packets++; + priv->statistics.tx_bytes += skb->len; + + return 0; + + drop_free: + /* free the skbuf structure before aborting */ + dev_kfree_skb(skb); + skb = NULL; + + priv->statistics.tx_dropped++; + spin_unlock_irqrestore(&priv->slock, flags); + return err; +} + +static inline int +islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) +{ + /* The card reports full 802.11 packets but with a 20 bytes + * header and without the FCS. But there a is a bit that + * indicates if the packet is corrupted :-) */ + struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data; + if (hdr->flags & 0x01) + /* This one is bad. Drop it ! */ + return -1; + if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) { + struct avs_80211_1_header *avs; + /* extract the relevant data from the header */ + u32 clock = le32_to_cpu(hdr->clock); + u8 rate = hdr->rate; + u16 freq = le16_to_cpu(hdr->freq); + u8 rssi = hdr->rssi; + + skb_pull(*skb, sizeof (struct rfmon_header)); + + if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) { + struct sk_buff *newskb = skb_copy_expand(*skb, + sizeof (struct + avs_80211_1_header), + 0, GFP_ATOMIC); + if (newskb) { + dev_kfree_skb_irq(*skb); + *skb = newskb; + } else + return -1; + /* This behavior is not very subtile... */ + } + + /* make room for the new header and fill it. */ + avs = + (struct avs_80211_1_header *) skb_push(*skb, + sizeof (struct + avs_80211_1_header)); + + avs->version = cpu_to_be32(P80211CAPTURE_VERSION); + avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); + avs->mactime = cpu_to_be64(le64_to_cpu(clock)); + avs->hosttime = cpu_to_be64(jiffies); + avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */ + avs->channel = cpu_to_be32(channel_of_freq(freq)); + avs->datarate = cpu_to_be32(rate * 5); + avs->antenna = cpu_to_be32(0); /*unknown */ + avs->priority = cpu_to_be32(0); /*unknown */ + avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */ + avs->ssi_signal = cpu_to_be32(rssi & 0x7f); + avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */ + avs->preamble = cpu_to_be32(0); /*unknown */ + avs->encoding = cpu_to_be32(0); /*unknown */ + } else + skb_pull(*skb, sizeof (struct rfmon_header)); + + (*skb)->protocol = htons(ETH_P_802_2); + (*skb)->mac.raw = (*skb)->data; + (*skb)->pkt_type = PACKET_OTHERHOST; + + return 0; +} + +int +islpci_eth_receive(islpci_private *priv) +{ + struct net_device *ndev = priv->ndev; + isl38xx_control_block *control_block = priv->control_block; + struct sk_buff *skb; + u16 size; + u32 index, offset; + unsigned char *src; + int discard = 0; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n"); +#endif + + /* the device has written an Ethernet frame in the data area + * of the sk_buff without updating the structure, do it now */ + index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE; + size = le16_to_cpu(control_block->rx_data_low[index].size); + skb = priv->data_low_rx[index]; + offset = ((unsigned long) + le32_to_cpu(control_block->rx_data_low[index].address) - + (unsigned long) skb->data) & 3; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ", + control_block->rx_data_low[priv->free_data_rx].address, skb->data, + skb->len, offset, skb->truesize); +#endif + + /* delete the streaming DMA mapping before processing the skb */ + pci_unmap_single(priv->pdev, + priv->pci_map_rx_address[index], + MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE); + + /* update the skb structure and allign the buffer */ + skb_put(skb, size); + if (offset) { + /* shift the buffer allocation offset bytes to get the right frame */ + skb_pull(skb, 2); + skb_put(skb, 2); + } +#if VERBOSE > SHOW_ERROR_MESSAGES + /* display the buffer contents for debugging */ + DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data); + display_buffer((char *) skb->data, skb->len); +#endif + + /* check whether WDS is enabled and whether the data frame is a WDS frame */ + + if (init_wds) { + /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */ + src = skb->data + 6; + memmove(skb->data, src, skb->len - 6); + skb_trim(skb, skb->len - 6); + } +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb); + DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len); + + /* display the buffer contents for debugging */ + DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data); + display_buffer((char *) skb->data, skb->len); +#endif + + /* do some additional sk_buff and network layer parameters */ + skb->dev = ndev; + + /* take care of monitor mode and spy monitoring. */ + if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) + discard = islpci_monitor_rx(priv, &skb); + else { + if (unlikely(skb->data[2 * ETH_ALEN] == 0)) { + /* The packet has a rx_annex. Read it for spy monitoring, Then + * remove it, while keeping the 2 leading MAC addr. + */ + struct iw_quality wstats; + struct rx_annex_header *annex = + (struct rx_annex_header *) skb->data; + wstats.level = annex->rfmon.rssi; + /* The noise value can be a bit outdated if nobody's + * reading wireless stats... */ + wstats.noise = priv->local_iwstatistics.qual.noise; + wstats.qual = wstats.level - wstats.noise; + wstats.updated = 0x07; + /* Update spy records */ + wireless_spy_update(ndev, annex->addr2, &wstats); + + memcpy(skb->data + sizeof (struct rfmon_header), + skb->data, 2 * ETH_ALEN); + skb_pull(skb, sizeof (struct rfmon_header)); + } + skb->protocol = eth_type_trans(skb, ndev); + } + skb->ip_summed = CHECKSUM_NONE; + priv->statistics.rx_packets++; + priv->statistics.rx_bytes += size; + + /* deliver the skb to the network layer */ +#ifdef ISLPCI_ETH_DEBUG + printk + ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", + skb->data[0], skb->data[1], skb->data[2], skb->data[3], + skb->data[4], skb->data[5]); +#endif + if (unlikely(discard)) { + dev_kfree_skb_irq(skb); + skb = NULL; + } else + netif_rx(skb); + + /* increment the read index for the rx data low queue */ + priv->free_data_rx++; + + /* add one or more sk_buff structures */ + while (index = + le32_to_cpu(control_block-> + driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]), + index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) { + /* allocate an sk_buff for received data frames storage + * include any required allignment operations */ + skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2); + if (unlikely(skb == NULL)) { + /* error allocating an sk_buff structure elements */ + DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n"); + break; + } + skb_reserve(skb, (4 - (long) skb->data) & 0x03); + /* store the new skb structure pointer */ + index = index % ISL38XX_CB_RX_QSIZE; + priv->data_low_rx[index] = skb; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ", + skb, skb->data, skb->len, index, skb->truesize); +#endif + + /* set the streaming DMA mapping for proper PCI bus operation */ + priv->pci_map_rx_address[index] = + pci_map_single(priv->pdev, (void *) skb->data, + MAX_FRAGMENT_SIZE_RX + 2, + PCI_DMA_FROMDEVICE); + if (unlikely(priv->pci_map_rx_address[index] == (dma_addr_t) NULL)) { + /* error mapping the buffer to device accessable memory address */ + DEBUG(SHOW_ERROR_MESSAGES, + "Error mapping DMA address\n"); + + /* free the skbuf structure before aborting */ + dev_kfree_skb_irq((struct sk_buff *) skb); + skb = NULL; + break; + } + /* update the fragment address */ + control_block->rx_data_low[index].address = cpu_to_le32((u32) + priv-> + pci_map_rx_address + [index]); + wmb(); + + /* increment the driver read pointer */ + add_le32p((u32 *) &control_block-> + driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1); + } + + /* trigger the device */ + islpci_trigger(priv); + + return 0; +} + +void +islpci_do_reset_and_wake(void *data) +{ + islpci_private *priv = (islpci_private *) data; + islpci_reset(priv, 1); + netif_wake_queue(priv->ndev); + priv->reset_task_pending = 0; +} + +void +islpci_eth_tx_timeout(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + struct net_device_stats *statistics = &priv->statistics; + + /* increment the transmit error counter */ + statistics->tx_errors++; + + printk(KERN_WARNING "%s: tx_timeout", ndev->name); + if (!priv->reset_task_pending) { + priv->reset_task_pending = 1; + printk(", scheduling a reset"); + netif_stop_queue(ndev); + schedule_work(&priv->reset_task); + } + printk("\n"); +} diff --git a/drivers/net/wireless/prism54/islpci_eth.h b/drivers/net/wireless/prism54/islpci_eth.h new file mode 100644 index 00000000000..bc9d7a60b8d --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_eth.h @@ -0,0 +1,73 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ISLPCI_ETH_H +#define _ISLPCI_ETH_H + +#include "isl_38xx.h" +#include "islpci_dev.h" + +struct rfmon_header { + u16 unk0; /* = 0x0000 */ + u16 length; /* = 0x1400 */ + u32 clock; /* 1MHz clock */ + u8 flags; + u8 unk1; + u8 rate; + u8 unk2; + u16 freq; + u16 unk3; + u8 rssi; + u8 padding[3]; +} __attribute__ ((packed)); + +struct rx_annex_header { + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + struct rfmon_header rfmon; +} __attribute__ ((packed)); + +/* wlan-ng (and hopefully others) AVS header, version one. Fields in + * network byte order. */ +#define P80211CAPTURE_VERSION 0x80211001 + +struct avs_80211_1_header { + uint32_t version; + uint32_t length; + uint64_t mactime; + uint64_t hosttime; + uint32_t phytype; + uint32_t channel; + uint32_t datarate; + uint32_t antenna; + uint32_t priority; + uint32_t ssi_type; + int32_t ssi_signal; + int32_t ssi_noise; + uint32_t preamble; + uint32_t encoding; +}; + +void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *); +int islpci_eth_transmit(struct sk_buff *, struct net_device *); +int islpci_eth_receive(islpci_private *); +void islpci_eth_tx_timeout(struct net_device *); +void islpci_do_reset_and_wake(void *data); + +#endif /* _ISL_GEN_H */ diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c new file mode 100644 index 00000000000..efd4d213ac3 --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -0,0 +1,339 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/init.h> /* For __init, __exit */ + +#include "prismcompat.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" /* for pc_debug */ +#include "isl_oid.h" + +#define DRV_NAME "prism54" +#define DRV_VERSION "1.2" + +MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>"); +MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter"); +MODULE_LICENSE("GPL"); + +static int init_pcitm = 0; +module_param(init_pcitm, int, 0); + +/* In this order: vendor, device, subvendor, subdevice, class, class_mask, + * driver_data + * If you have an update for this please contact prism54-devel@prism54.org + * The latest list can be found at http://prism54.org/supported_cards.php */ +static const struct pci_device_id prism54_id_tbl[] = { + /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ + { + 0x1260, 0x3890, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* 3COM 3CRWE154G72 Wireless LAN adapter */ + { + 0x10b7, 0x6001, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* Intersil PRISM Indigo Wireless LAN adapter */ + { + 0x1260, 0x3877, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ + { + 0x1260, 0x3886, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* End of list */ + {0,0,0,0,0,0,0} +}; + +/* register the device with the Hotplug facilities of the kernel */ +MODULE_DEVICE_TABLE(pci, prism54_id_tbl); + +static int prism54_probe(struct pci_dev *, const struct pci_device_id *); +static void prism54_remove(struct pci_dev *); +static int prism54_suspend(struct pci_dev *, u32 state); +static int prism54_resume(struct pci_dev *); + +static struct pci_driver prism54_driver = { + .name = DRV_NAME, + .id_table = prism54_id_tbl, + .probe = prism54_probe, + .remove = prism54_remove, + .suspend = prism54_suspend, + .resume = prism54_resume, + /* .enable_wake ; we don't support this yet */ +}; + +/****************************************************************************** + Module initialization functions +******************************************************************************/ + +int +prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net_device *ndev; + u8 latency_tmr; + u32 mem_addr; + islpci_private *priv; + int rvalue; + + /* Enable the pci device */ + if (pci_enable_device(pdev)) { + printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME); + return -ENODEV; + } + + /* check whether the latency timer is set correctly */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_tmr); +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "latency timer: %x\n", latency_tmr); +#endif + if (latency_tmr < PCIDEVICE_LATENCY_TIMER_MIN) { + /* set the latency timer */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, + PCIDEVICE_LATENCY_TIMER_VAL); + } + + /* enable PCI DMA */ + if (pci_set_dma_mask(pdev, 0xffffffff)) { + printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME); + goto do_pci_disable_device; + } + + /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT) + * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT) + * The RETRY_TIMEOUT is used to set the number of retries that the core, as a + * Master, will perform before abandoning a cycle. The default value for + * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new + * devices. A write of zero to the RETRY_TIMEOUT register disables this + * function to allow use with any non-compliant legacy devices that may + * execute more retries. + * + * Writing zero to both these two registers will disable both timeouts and + * *can* solve problems caused by devices that are slow to respond. + * Make this configurable - MSW + */ + if ( init_pcitm >= 0 ) { + pci_write_config_byte(pdev, 0x40, (u8)init_pcitm); + pci_write_config_byte(pdev, 0x41, (u8)init_pcitm); + } else { + printk(KERN_INFO "PCI TRDY/RETRY unchanged\n"); + } + + /* request the pci device I/O regions */ + rvalue = pci_request_regions(pdev, DRV_NAME); + if (rvalue) { + printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n", + DRV_NAME, rvalue); + goto do_pci_disable_device; + } + + /* check if the memory window is indeed set */ + rvalue = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &mem_addr); + if (rvalue || !mem_addr) { + printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n", + DRV_NAME); + goto do_pci_release_regions; + } + + /* enable PCI bus-mastering */ + DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME); + pci_set_master(pdev); + + /* enable MWI */ + pci_set_mwi(pdev); + + /* setup the network device interface and its structure */ + if (!(ndev = islpci_setup(pdev))) { + /* error configuring the driver as a network device */ + printk(KERN_ERR "%s: could not configure network device\n", + DRV_NAME); + goto do_pci_release_regions; + } + + priv = netdev_priv(ndev); + islpci_set_state(priv, PRV_STATE_PREBOOT); /* we are attempting to boot */ + + /* card is in unknown state yet, might have some interrupts pending */ + isl38xx_disable_interrupts(priv->device_base); + + /* request for the interrupt before uploading the firmware */ + rvalue = request_irq(pdev->irq, &islpci_interrupt, + SA_SHIRQ, ndev->name, priv); + + if (rvalue) { + /* error, could not hook the handler to the irq */ + printk(KERN_ERR "%s: could not install IRQ handler\n", + ndev->name); + goto do_unregister_netdev; + } + + /* firmware upload is triggered in islpci_open */ + + return 0; + + do_unregister_netdev: + unregister_netdev(ndev); + islpci_free_memory(priv); + pci_set_drvdata(pdev, NULL); + free_netdev(ndev); + priv = NULL; + do_pci_release_regions: + pci_release_regions(pdev); + do_pci_disable_device: + pci_disable_device(pdev); + return -EIO; +} + +/* set by cleanup_module */ +static volatile int __in_cleanup_module = 0; + +/* this one removes one(!!) instance only */ +void +prism54_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; + BUG_ON(!priv); + + if (!__in_cleanup_module) { + printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name); + islpci_set_state(priv, PRV_STATE_OFF); + } + + printk(KERN_DEBUG "%s: removing device\n", ndev->name); + + unregister_netdev(ndev); + + /* free the interrupt request */ + + if (islpci_get_state(priv) != PRV_STATE_OFF) { + isl38xx_disable_interrupts(priv->device_base); + islpci_set_state(priv, PRV_STATE_OFF); + /* This bellow causes a lockup at rmmod time. It might be + * because some interrupts still linger after rmmod time, + * see bug #17 */ + /* pci_set_power_state(pdev, 3);*/ /* try to power-off */ + } + + free_irq(pdev->irq, priv); + + /* free the PCI memory and unmap the remapped page */ + islpci_free_memory(priv); + + pci_set_drvdata(pdev, NULL); + free_netdev(ndev); + priv = NULL; + + pci_release_regions(pdev); + + pci_disable_device(pdev); +} + +int +prism54_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; + BUG_ON(!priv); + + printk(KERN_NOTICE "%s: got suspend request (state %d)\n", + ndev->name, state); + + pci_save_state(pdev); + + /* tell the device not to trigger interrupts for now... */ + isl38xx_disable_interrupts(priv->device_base); + + /* from now on assume the hardware was already powered down + and don't touch it anymore */ + islpci_set_state(priv, PRV_STATE_OFF); + + netif_stop_queue(ndev); + netif_device_detach(ndev); + + return 0; +} + +int +prism54_resume(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; + BUG_ON(!priv); + + pci_enable_device(pdev); + + printk(KERN_NOTICE "%s: got resume request\n", ndev->name); + + pci_restore_state(pdev); + + /* alright let's go into the PREBOOT state */ + islpci_reset(priv, 1); + + netif_device_attach(ndev); + netif_start_queue(ndev); + + return 0; +} + +static int __init +prism54_module_init(void) +{ + printk(KERN_INFO "Loaded %s driver, version %s\n", + DRV_NAME, DRV_VERSION); + + __bug_on_wrong_struct_sizes (); + + return pci_module_init(&prism54_driver); +} + +/* by the time prism54_module_exit() terminates, as a postcondition + * all instances will have been destroyed by calls to + * prism54_remove() */ +static void __exit +prism54_module_exit(void) +{ + __in_cleanup_module = 1; + + pci_unregister_driver(&prism54_driver); + + printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME); + + __in_cleanup_module = 0; +} + +/* register entry points */ +module_init(prism54_module_init); +module_exit(prism54_module_exit); +/* EOF */ diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c new file mode 100644 index 00000000000..b6f2e5a223b --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -0,0 +1,513 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright 2004 Jens Maurer <Jens.Maurer@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/config.h> +#include <linux/netdevice.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include <asm/system.h> +#include <linux/if_arp.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_mgt.h" +#include "isl_oid.h" /* additional types and defs for isl38xx fw */ +#include "isl_ioctl.h" + +#include <net/iw_handler.h> + +/****************************************************************************** + Global variable definition section +******************************************************************************/ +int pc_debug = VERBOSE; +module_param(pc_debug, int, 0); + +/****************************************************************************** + Driver general functions +******************************************************************************/ +#if VERBOSE > SHOW_ERROR_MESSAGES +void +display_buffer(char *buffer, int length) +{ + if ((pc_debug & SHOW_BUFFER_CONTENTS) == 0) + return; + + while (length > 0) { + printk("[%02x]", *buffer & 255); + length--; + buffer++; + } + + printk("\n"); +} +#endif + +/***************************************************************************** + Queue handling for management frames +******************************************************************************/ + +/* + * Helper function to create a PIMFOR management frame header. + */ +static void +pimfor_encode_header(int operation, u32 oid, u32 length, pimfor_header_t *h) +{ + h->version = PIMFOR_VERSION; + h->operation = operation; + h->device_id = PIMFOR_DEV_ID_MHLI_MIB; + h->flags = 0; + h->oid = cpu_to_be32(oid); + h->length = cpu_to_be32(length); +} + +/* + * Helper function to analyze a PIMFOR management frame header. + */ +static pimfor_header_t * +pimfor_decode_header(void *data, int len) +{ + pimfor_header_t *h = data; + + while ((void *) h < data + len) { + if (h->flags & PIMFOR_FLAG_LITTLE_ENDIAN) { + le32_to_cpus(&h->oid); + le32_to_cpus(&h->length); + } else { + be32_to_cpus(&h->oid); + be32_to_cpus(&h->length); + } + if (h->oid != OID_INL_TUNNEL) + return h; + h++; + } + return NULL; +} + +/* + * Fill the receive queue for management frames with fresh buffers. + */ +int +islpci_mgmt_rx_fill(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = /* volatile not needed */ + (isl38xx_control_block *) priv->control_block; + u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n"); +#endif + + while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) { + u32 index = curr % ISL38XX_CB_MGMT_QSIZE; + struct islpci_membuf *buf = &priv->mgmt_rx[index]; + isl38xx_fragment *frag = &cb->rx_data_mgmt[index]; + + if (buf->mem == NULL) { + buf->mem = kmalloc(MGMT_FRAME_SIZE, GFP_ATOMIC); + if (!buf->mem) { + printk(KERN_WARNING + "Error allocating management frame.\n"); + return -ENOMEM; + } + buf->size = MGMT_FRAME_SIZE; + } + if (buf->pci_addr == 0) { + buf->pci_addr = pci_map_single(priv->pdev, buf->mem, + MGMT_FRAME_SIZE, + PCI_DMA_FROMDEVICE); + if (!buf->pci_addr) { + printk(KERN_WARNING + "Failed to make memory DMA'able\n."); + return -ENOMEM; + } + } + + /* be safe: always reset control block information */ + frag->size = cpu_to_le16(MGMT_FRAME_SIZE); + frag->flags = 0; + frag->address = cpu_to_le32(buf->pci_addr); + curr++; + + /* The fragment address in the control block must have + * been written before announcing the frame buffer to + * device */ + wmb(); + cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = cpu_to_le32(curr); + } + return 0; +} + +/* + * Create and transmit a management frame using "operation" and "oid", + * with arguments data/length. + * We either return an error and free the frame, or we return 0 and + * islpci_mgt_cleanup_transmit() frees the frame in the tx-done + * interrupt. + */ +static int +islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid, + void *data, int length) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = + (isl38xx_control_block *) priv->control_block; + void *p; + int err = -EINVAL; + unsigned long flags; + isl38xx_fragment *frag; + struct islpci_membuf buf; + u32 curr_frag; + int index; + int frag_len = length + PIMFOR_HEADER_SIZE; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_transmit\n"); +#endif + + if (frag_len > MGMT_FRAME_SIZE) { + printk(KERN_DEBUG "%s: mgmt frame too large %d\n", + ndev->name, frag_len); + goto error; + } + + err = -ENOMEM; + p = buf.mem = kmalloc(frag_len, GFP_KERNEL); + if (!buf.mem) { + printk(KERN_DEBUG "%s: cannot allocate mgmt frame\n", + ndev->name); + goto error; + } + buf.size = frag_len; + + /* create the header directly in the fragment data area */ + pimfor_encode_header(operation, oid, length, (pimfor_header_t *) p); + p += PIMFOR_HEADER_SIZE; + + if (data) + memcpy(p, data, length); + else + memset(p, 0, length); + +#if VERBOSE > SHOW_ERROR_MESSAGES + { + pimfor_header_t *h = buf.mem; + DEBUG(SHOW_PIMFOR_FRAMES, + "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n", + h->operation, oid, h->device_id, h->flags, length); + + /* display the buffer contents for debugging */ + display_buffer((char *) h, sizeof (pimfor_header_t)); + display_buffer(p, length); + } +#endif + + err = -ENOMEM; + buf.pci_addr = pci_map_single(priv->pdev, buf.mem, frag_len, + PCI_DMA_TODEVICE); + if (!buf.pci_addr) { + printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n", + ndev->name); + goto error_free; + } + + /* Protect the control block modifications against interrupts. */ + spin_lock_irqsave(&priv->slock, flags); + curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ]); + if (curr_frag - priv->index_mgmt_tx >= ISL38XX_CB_MGMT_QSIZE) { + printk(KERN_WARNING "%s: mgmt tx queue is still full\n", + ndev->name); + goto error_unlock; + } + + /* commit the frame to the tx device queue */ + index = curr_frag % ISL38XX_CB_MGMT_QSIZE; + priv->mgmt_tx[index] = buf; + frag = &cb->tx_data_mgmt[index]; + frag->size = cpu_to_le16(frag_len); + frag->flags = 0; /* for any other than the last fragment, set to 1 */ + frag->address = cpu_to_le32(buf.pci_addr); + + /* The fragment address in the control block must have + * been written before announcing the frame buffer to + * device */ + wmb(); + cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ] = cpu_to_le32(curr_frag + 1); + spin_unlock_irqrestore(&priv->slock, flags); + + /* trigger the device */ + islpci_trigger(priv); + return 0; + + error_unlock: + spin_unlock_irqrestore(&priv->slock, flags); + error_free: + kfree(buf.mem); + error: + return err; +} + +/* + * Receive a management frame from the device. + * This can be an arbitrary number of traps, and at most one response + * frame for a previous request sent via islpci_mgt_transmit(). + */ +int +islpci_mgt_receive(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = + (isl38xx_control_block *) priv->control_block; + u32 curr_frag; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n"); +#endif + + /* Only once per interrupt, determine fragment range to + * process. This avoids an endless loop (i.e. lockup) if + * frames come in faster than we can process them. */ + curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_RX_MGMTQ]); + barrier(); + + for (; priv->index_mgmt_rx < curr_frag; priv->index_mgmt_rx++) { + pimfor_header_t *header; + u32 index = priv->index_mgmt_rx % ISL38XX_CB_MGMT_QSIZE; + struct islpci_membuf *buf = &priv->mgmt_rx[index]; + u16 frag_len; + int size; + struct islpci_mgmtframe *frame; + + /* I have no idea (and no documentation) if flags != 0 + * is possible. Drop the frame, reuse the buffer. */ + if (le16_to_cpu(cb->rx_data_mgmt[index].flags) != 0) { + printk(KERN_WARNING "%s: unknown flags 0x%04x\n", + ndev->name, + le16_to_cpu(cb->rx_data_mgmt[index].flags)); + continue; + } + + /* The device only returns the size of the header(s) here. */ + frag_len = le16_to_cpu(cb->rx_data_mgmt[index].size); + + /* + * We appear to have no way to tell the device the + * size of a receive buffer. Thus, if this check + * triggers, we likely have kernel heap corruption. */ + if (frag_len > MGMT_FRAME_SIZE) { + printk(KERN_WARNING + "%s: Bogus packet size of %d (%#x).\n", + ndev->name, frag_len, frag_len); + frag_len = MGMT_FRAME_SIZE; + } + + /* Ensure the results of device DMA are visible to the CPU. */ + pci_dma_sync_single_for_cpu(priv->pdev, buf->pci_addr, + buf->size, PCI_DMA_FROMDEVICE); + + /* Perform endianess conversion for PIMFOR header in-place. */ + header = pimfor_decode_header(buf->mem, frag_len); + if (!header) { + printk(KERN_WARNING "%s: no PIMFOR header found\n", + ndev->name); + continue; + } + + /* The device ID from the PIMFOR packet received from + * the MVC is always 0. We forward a sensible device_id. + * Not that anyone upstream would care... */ + header->device_id = priv->ndev->ifindex; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_PIMFOR_FRAMES, + "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n", + header->operation, header->oid, header->device_id, + header->flags, header->length); + + /* display the buffer contents for debugging */ + display_buffer((char *) header, PIMFOR_HEADER_SIZE); + display_buffer((char *) header + PIMFOR_HEADER_SIZE, + header->length); +#endif + + /* nobody sends these */ + if (header->flags & PIMFOR_FLAG_APPLIC_ORIGIN) { + printk(KERN_DEBUG + "%s: errant PIMFOR application frame\n", + ndev->name); + continue; + } + + /* Determine frame size, skipping OID_INL_TUNNEL headers. */ + size = PIMFOR_HEADER_SIZE + header->length; + frame = kmalloc(sizeof (struct islpci_mgmtframe) + size, + GFP_ATOMIC); + if (!frame) { + printk(KERN_WARNING + "%s: Out of memory, cannot handle oid 0x%08x\n", + ndev->name, header->oid); + continue; + } + frame->ndev = ndev; + memcpy(&frame->buf, header, size); + frame->header = (pimfor_header_t *) frame->buf; + frame->data = frame->buf + PIMFOR_HEADER_SIZE; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_PIMFOR_FRAMES, + "frame: header: %p, data: %p, size: %d\n", + frame->header, frame->data, size); +#endif + + if (header->operation == PIMFOR_OP_TRAP) { +#if VERBOSE > SHOW_ERROR_MESSAGES + printk(KERN_DEBUG + "TRAP: oid 0x%x, device %i, flags 0x%x length %i\n", + header->oid, header->device_id, header->flags, + header->length); +#endif + + /* Create work to handle trap out of interrupt + * context. */ + INIT_WORK(&frame->ws, prism54_process_trap, frame); + schedule_work(&frame->ws); + + } else { + /* Signal the one waiting process that a response + * has been received. */ + if ((frame = xchg(&priv->mgmt_received, frame)) != NULL) { + printk(KERN_WARNING + "%s: mgmt response not collected\n", + ndev->name); + kfree(frame); + } +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Wake up Mgmt Queue\n"); +#endif + wake_up(&priv->mgmt_wqueue); + } + + } + + return 0; +} + +/* + * Cleanup the transmit queue by freeing all frames handled by the device. + */ +void +islpci_mgt_cleanup_transmit(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = /* volatile not needed */ + (isl38xx_control_block *) priv->control_block; + u32 curr_frag; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_cleanup_transmit\n"); +#endif + + /* Only once per cleanup, determine fragment range to + * process. This avoids an endless loop (i.e. lockup) if + * the device became confused, incrementing device_curr_frag + * rapidly. */ + curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_TX_MGMTQ]); + barrier(); + + for (; priv->index_mgmt_tx < curr_frag; priv->index_mgmt_tx++) { + int index = priv->index_mgmt_tx % ISL38XX_CB_MGMT_QSIZE; + struct islpci_membuf *buf = &priv->mgmt_tx[index]; + pci_unmap_single(priv->pdev, buf->pci_addr, buf->size, + PCI_DMA_TODEVICE); + buf->pci_addr = 0; + kfree(buf->mem); + buf->mem = NULL; + buf->size = 0; + } +} + +/* + * Perform one request-response transaction to the device. + */ +int +islpci_mgt_transaction(struct net_device *ndev, + int operation, unsigned long oid, + void *senddata, int sendlen, + struct islpci_mgmtframe **recvframe) +{ + islpci_private *priv = netdev_priv(ndev); + const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000; + long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies; + int err; + DEFINE_WAIT(wait); + + *recvframe = NULL; + + if (down_interruptible(&priv->mgmt_sem)) + return -ERESTARTSYS; + + prepare_to_wait(&priv->mgmt_wqueue, &wait, TASK_UNINTERRUPTIBLE); + err = islpci_mgt_transmit(ndev, operation, oid, senddata, sendlen); + if (err) + goto out; + + err = -ETIMEDOUT; + while (timeout_left > 0) { + int timeleft; + struct islpci_mgmtframe *frame; + + set_current_state(TASK_UNINTERRUPTIBLE); + timeleft = schedule_timeout(wait_cycle_jiffies); + frame = xchg(&priv->mgmt_received, NULL); + if (frame) { + if (frame->header->oid == oid) { + *recvframe = frame; + err = 0; + goto out; + } else { + printk(KERN_DEBUG + "%s: expecting oid 0x%x, received 0x%x.\n", + ndev->name, (unsigned int) oid, + frame->header->oid); + kfree(frame); + frame = NULL; + } + } + if (timeleft == 0) { + printk(KERN_DEBUG + "%s: timeout waiting for mgmt response %lu, " + "triggering device\n", + ndev->name, timeout_left); + islpci_trigger(priv); + } + timeout_left += timeleft - wait_cycle_jiffies; + } + printk(KERN_WARNING "%s: timeout waiting for mgmt response\n", + ndev->name); + + /* TODO: we should reset the device here */ + out: + finish_wait(&priv->mgmt_wqueue, &wait); + up(&priv->mgmt_sem); + return err; +} + diff --git a/drivers/net/wireless/prism54/islpci_mgt.h b/drivers/net/wireless/prism54/islpci_mgt.h new file mode 100644 index 00000000000..2982be3363e --- /dev/null +++ b/drivers/net/wireless/prism54/islpci_mgt.h @@ -0,0 +1,145 @@ +/* + * + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ISLPCI_MGT_H +#define _ISLPCI_MGT_H + +#include <linux/wireless.h> +#include <linux/skbuff.h> + +/* + * Function definitions + */ + +#define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0) +#define DEBUG(f, args...) K_DEBUG(f, pc_debug, args) + +extern int pc_debug; +#define init_wds 0 /* help compiler optimize away dead code */ + + +/* General driver definitions */ +#define PCIDEVICE_LATENCY_TIMER_MIN 0x40 +#define PCIDEVICE_LATENCY_TIMER_VAL 0x50 + +/* Debugging verbose definitions */ +#define SHOW_NOTHING 0x00 /* overrules everything */ +#define SHOW_ANYTHING 0xFF +#define SHOW_ERROR_MESSAGES 0x01 +#define SHOW_TRAPS 0x02 +#define SHOW_FUNCTION_CALLS 0x04 +#define SHOW_TRACING 0x08 +#define SHOW_QUEUE_INDEXES 0x10 +#define SHOW_PIMFOR_FRAMES 0x20 +#define SHOW_BUFFER_CONTENTS 0x40 +#define VERBOSE 0x01 + +/* Default card definitions */ +#define CARD_DEFAULT_CHANNEL 6 +#define CARD_DEFAULT_MODE INL_MODE_CLIENT +#define CARD_DEFAULT_IW_MODE IW_MODE_INFRA +#define CARD_DEFAULT_BSSTYPE DOT11_BSSTYPE_INFRA +#define CARD_DEFAULT_CLIENT_SSID "" +#define CARD_DEFAULT_AP_SSID "default" +#define CARD_DEFAULT_KEY1 "default_key_1" +#define CARD_DEFAULT_KEY2 "default_key_2" +#define CARD_DEFAULT_KEY3 "default_key_3" +#define CARD_DEFAULT_KEY4 "default_key_4" +#define CARD_DEFAULT_WEP 0 +#define CARD_DEFAULT_FILTER 0 +#define CARD_DEFAULT_WDS 0 +#define CARD_DEFAULT_AUTHEN DOT11_AUTH_OS +#define CARD_DEFAULT_DOT1X 0 +#define CARD_DEFAULT_MLME_MODE DOT11_MLME_AUTO +#define CARD_DEFAULT_CONFORMANCE OID_INL_CONFORMANCE_NONE +#define CARD_DEFAULT_PROFILE DOT11_PROFILE_MIXED_G_WIFI +#define CARD_DEFAULT_MAXFRAMEBURST DOT11_MAXFRAMEBURST_MIXED_SAFE + +/* PIMFOR package definitions */ +#define PIMFOR_ETHERTYPE 0x8828 +#define PIMFOR_HEADER_SIZE 12 +#define PIMFOR_VERSION 1 +#define PIMFOR_OP_GET 0 +#define PIMFOR_OP_SET 1 +#define PIMFOR_OP_RESPONSE 2 +#define PIMFOR_OP_ERROR 3 +#define PIMFOR_OP_TRAP 4 +#define PIMFOR_OP_RESERVED 5 /* till 255 */ +#define PIMFOR_DEV_ID_MHLI_MIB 0 +#define PIMFOR_FLAG_APPLIC_ORIGIN 0x01 +#define PIMFOR_FLAG_LITTLE_ENDIAN 0x02 + +static inline void +add_le32p(u32 * le_number, u32 add) +{ + *le_number = cpu_to_le32(le32_to_cpup(le_number) + add); +} + +void display_buffer(char *, int); + +/* + * Type definition section + * + * the structure defines only the header allowing copyless + * frame handling + */ +typedef struct { + u8 version; + u8 operation; + u32 oid; + u8 device_id; + u8 flags; + u32 length; +} __attribute__ ((packed)) +pimfor_header_t; + +/* A received and interrupt-processed management frame, either for + * schedule_work(prism54_process_trap) or for priv->mgmt_received, + * processed by islpci_mgt_transaction(). */ +struct islpci_mgmtframe { + struct net_device *ndev; /* pointer to network device */ + pimfor_header_t *header; /* payload header, points into buf */ + void *data; /* payload ex header, points into buf */ + struct work_struct ws; /* argument for schedule_work() */ + char buf[0]; /* fragment buffer */ +}; + +int +islpci_mgt_receive(struct net_device *ndev); + +int +islpci_mgmt_rx_fill(struct net_device *ndev); + +void +islpci_mgt_cleanup_transmit(struct net_device *ndev); + +int +islpci_mgt_transaction(struct net_device *ndev, + int operation, unsigned long oid, + void *senddata, int sendlen, + struct islpci_mgmtframe **recvframe); + +static inline void +islpci_mgt_release(struct islpci_mgmtframe *frame) +{ + kfree(frame); +} + +#endif /* _ISLPCI_MGT_H */ diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c new file mode 100644 index 00000000000..12123e24b11 --- /dev/null +++ b/drivers/net/wireless/prism54/oid_mgt.c @@ -0,0 +1,907 @@ +/* + * Copyright (C) 2003,2004 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "prismcompat.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" +#include "isl_oid.h" +#include "oid_mgt.h" +#include "isl_ioctl.h" + +/* to convert between channel and freq */ +static const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432, + 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; + +int +channel_of_freq(int f) +{ + int c = 0; + + if ((f >= 2412) && (f <= 2484)) { + while ((c < 14) && (f != frequency_list_bg[c])) + c++; + return (c >= 14) ? 0 : ++c; + } else if ((f >= (int) 5000) && (f <= (int) 6000)) { + return ( (f - 5000) / 5 ); + } else + return 0; +} + +#define OID_STRUCT(name,oid,s,t) [name] = {oid, 0, sizeof(s), t} +#define OID_STRUCT_C(name,oid,s,t) OID_STRUCT(name,oid,s,t | OID_FLAG_CACHED) +#define OID_U32(name,oid) OID_STRUCT(name,oid,u32,OID_TYPE_U32) +#define OID_U32_C(name,oid) OID_STRUCT_C(name,oid,u32,OID_TYPE_U32) +#define OID_STRUCT_MLME(name,oid) OID_STRUCT(name,oid,struct obj_mlme,OID_TYPE_MLME) +#define OID_STRUCT_MLMEEX(name,oid) OID_STRUCT(name,oid,struct obj_mlmeex,OID_TYPE_MLMEEX) + +#define OID_UNKNOWN(name,oid) OID_STRUCT(name,oid,0,0) + +struct oid_t isl_oid[] = { + OID_STRUCT(GEN_OID_MACADDRESS, 0x00000000, u8[6], OID_TYPE_ADDR), + OID_U32(GEN_OID_LINKSTATE, 0x00000001), + OID_UNKNOWN(GEN_OID_WATCHDOG, 0x00000002), + OID_UNKNOWN(GEN_OID_MIBOP, 0x00000003), + OID_UNKNOWN(GEN_OID_OPTIONS, 0x00000004), + OID_UNKNOWN(GEN_OID_LEDCONFIG, 0x00000005), + + /* 802.11 */ + OID_U32_C(DOT11_OID_BSSTYPE, 0x10000000), + OID_STRUCT_C(DOT11_OID_BSSID, 0x10000001, u8[6], OID_TYPE_RAW), + OID_STRUCT_C(DOT11_OID_SSID, 0x10000002, struct obj_ssid, + OID_TYPE_SSID), + OID_U32(DOT11_OID_STATE, 0x10000003), + OID_U32(DOT11_OID_AID, 0x10000004), + OID_STRUCT(DOT11_OID_COUNTRYSTRING, 0x10000005, u8[4], OID_TYPE_RAW), + OID_STRUCT_C(DOT11_OID_SSIDOVERRIDE, 0x10000006, struct obj_ssid, + OID_TYPE_SSID), + + OID_U32(DOT11_OID_MEDIUMLIMIT, 0x11000000), + OID_U32_C(DOT11_OID_BEACONPERIOD, 0x11000001), + OID_U32(DOT11_OID_DTIMPERIOD, 0x11000002), + OID_U32(DOT11_OID_ATIMWINDOW, 0x11000003), + OID_U32(DOT11_OID_LISTENINTERVAL, 0x11000004), + OID_U32(DOT11_OID_CFPPERIOD, 0x11000005), + OID_U32(DOT11_OID_CFPDURATION, 0x11000006), + + OID_U32_C(DOT11_OID_AUTHENABLE, 0x12000000), + OID_U32_C(DOT11_OID_PRIVACYINVOKED, 0x12000001), + OID_U32_C(DOT11_OID_EXUNENCRYPTED, 0x12000002), + OID_U32_C(DOT11_OID_DEFKEYID, 0x12000003), + [DOT11_OID_DEFKEYX] = {0x12000004, 3, sizeof (struct obj_key), + OID_FLAG_CACHED | OID_TYPE_KEY}, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */ + OID_UNKNOWN(DOT11_OID_STAKEY, 0x12000008), + OID_U32(DOT11_OID_REKEYTHRESHOLD, 0x12000009), + OID_UNKNOWN(DOT11_OID_STASC, 0x1200000a), + + OID_U32(DOT11_OID_PRIVTXREJECTED, 0x1a000000), + OID_U32(DOT11_OID_PRIVRXPLAIN, 0x1a000001), + OID_U32(DOT11_OID_PRIVRXFAILED, 0x1a000002), + OID_U32(DOT11_OID_PRIVRXNOKEY, 0x1a000003), + + OID_U32_C(DOT11_OID_RTSTHRESH, 0x13000000), + OID_U32_C(DOT11_OID_FRAGTHRESH, 0x13000001), + OID_U32_C(DOT11_OID_SHORTRETRIES, 0x13000002), + OID_U32_C(DOT11_OID_LONGRETRIES, 0x13000003), + OID_U32_C(DOT11_OID_MAXTXLIFETIME, 0x13000004), + OID_U32(DOT11_OID_MAXRXLIFETIME, 0x13000005), + OID_U32(DOT11_OID_AUTHRESPTIMEOUT, 0x13000006), + OID_U32(DOT11_OID_ASSOCRESPTIMEOUT, 0x13000007), + + OID_UNKNOWN(DOT11_OID_ALOFT_TABLE, 0x1d000000), + OID_UNKNOWN(DOT11_OID_ALOFT_CTRL_TABLE, 0x1d000001), + OID_UNKNOWN(DOT11_OID_ALOFT_RETREAT, 0x1d000002), + OID_UNKNOWN(DOT11_OID_ALOFT_PROGRESS, 0x1d000003), + OID_U32(DOT11_OID_ALOFT_FIXEDRATE, 0x1d000004), + OID_UNKNOWN(DOT11_OID_ALOFT_RSSIGRAPH, 0x1d000005), + OID_UNKNOWN(DOT11_OID_ALOFT_CONFIG, 0x1d000006), + + [DOT11_OID_VDCFX] = {0x1b000000, 7, 0, 0}, + OID_U32(DOT11_OID_MAXFRAMEBURST, 0x1b000008), + + OID_U32(DOT11_OID_PSM, 0x14000000), + OID_U32(DOT11_OID_CAMTIMEOUT, 0x14000001), + OID_U32(DOT11_OID_RECEIVEDTIMS, 0x14000002), + OID_U32(DOT11_OID_ROAMPREFERENCE, 0x14000003), + + OID_U32(DOT11_OID_BRIDGELOCAL, 0x15000000), + OID_U32(DOT11_OID_CLIENTS, 0x15000001), + OID_U32(DOT11_OID_CLIENTSASSOCIATED, 0x15000002), + [DOT11_OID_CLIENTX] = {0x15000003, 2006, 0, 0}, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */ + + OID_STRUCT(DOT11_OID_CLIENTFIND, 0x150007DB, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_WDSLINKADD, 0x150007DC, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_WDSLINKREMOVE, 0x150007DD, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_EAPAUTHSTA, 0x150007DE, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_EAPUNAUTHSTA, 0x150007DF, u8[6], OID_TYPE_ADDR), + OID_U32_C(DOT11_OID_DOT1XENABLE, 0x150007E0), + OID_UNKNOWN(DOT11_OID_MICFAILURE, 0x150007E1), + OID_UNKNOWN(DOT11_OID_REKEYINDICATE, 0x150007E2), + + OID_U32(DOT11_OID_MPDUTXSUCCESSFUL, 0x16000000), + OID_U32(DOT11_OID_MPDUTXONERETRY, 0x16000001), + OID_U32(DOT11_OID_MPDUTXMULTIPLERETRIES, 0x16000002), + OID_U32(DOT11_OID_MPDUTXFAILED, 0x16000003), + OID_U32(DOT11_OID_MPDURXSUCCESSFUL, 0x16000004), + OID_U32(DOT11_OID_MPDURXDUPS, 0x16000005), + OID_U32(DOT11_OID_RTSSUCCESSFUL, 0x16000006), + OID_U32(DOT11_OID_RTSFAILED, 0x16000007), + OID_U32(DOT11_OID_ACKFAILED, 0x16000008), + OID_U32(DOT11_OID_FRAMERECEIVES, 0x16000009), + OID_U32(DOT11_OID_FRAMEERRORS, 0x1600000A), + OID_U32(DOT11_OID_FRAMEABORTS, 0x1600000B), + OID_U32(DOT11_OID_FRAMEABORTSPHY, 0x1600000C), + + OID_U32(DOT11_OID_SLOTTIME, 0x17000000), + OID_U32(DOT11_OID_CWMIN, 0x17000001), + OID_U32(DOT11_OID_CWMAX, 0x17000002), + OID_U32(DOT11_OID_ACKWINDOW, 0x17000003), + OID_U32(DOT11_OID_ANTENNARX, 0x17000004), + OID_U32(DOT11_OID_ANTENNATX, 0x17000005), + OID_U32(DOT11_OID_ANTENNADIVERSITY, 0x17000006), + OID_U32_C(DOT11_OID_CHANNEL, 0x17000007), + OID_U32_C(DOT11_OID_EDTHRESHOLD, 0x17000008), + OID_U32(DOT11_OID_PREAMBLESETTINGS, 0x17000009), + OID_STRUCT(DOT11_OID_RATES, 0x1700000A, u8[IWMAX_BITRATES + 1], + OID_TYPE_RAW), + OID_U32(DOT11_OID_CCAMODESUPPORTED, 0x1700000B), + OID_U32(DOT11_OID_CCAMODE, 0x1700000C), + OID_UNKNOWN(DOT11_OID_RSSIVECTOR, 0x1700000D), + OID_UNKNOWN(DOT11_OID_OUTPUTPOWERTABLE, 0x1700000E), + OID_U32(DOT11_OID_OUTPUTPOWER, 0x1700000F), + OID_STRUCT(DOT11_OID_SUPPORTEDRATES, 0x17000010, + u8[IWMAX_BITRATES + 1], OID_TYPE_RAW), + OID_U32_C(DOT11_OID_FREQUENCY, 0x17000011), + [DOT11_OID_SUPPORTEDFREQUENCIES] = + {0x17000012, 0, sizeof (struct obj_frequencies) + + sizeof (u16) * IWMAX_FREQ, OID_TYPE_FREQUENCIES}, + + OID_U32(DOT11_OID_NOISEFLOOR, 0x17000013), + OID_STRUCT(DOT11_OID_FREQUENCYACTIVITY, 0x17000014, u8[IWMAX_FREQ + 1], + OID_TYPE_RAW), + OID_UNKNOWN(DOT11_OID_IQCALIBRATIONTABLE, 0x17000015), + OID_U32(DOT11_OID_NONERPPROTECTION, 0x17000016), + OID_U32(DOT11_OID_SLOTSETTINGS, 0x17000017), + OID_U32(DOT11_OID_NONERPTIMEOUT, 0x17000018), + OID_U32(DOT11_OID_PROFILES, 0x17000019), + OID_STRUCT(DOT11_OID_EXTENDEDRATES, 0x17000020, + u8[IWMAX_BITRATES + 1], OID_TYPE_RAW), + + OID_STRUCT_MLME(DOT11_OID_DEAUTHENTICATE, 0x18000000), + OID_STRUCT_MLME(DOT11_OID_AUTHENTICATE, 0x18000001), + OID_STRUCT_MLME(DOT11_OID_DISASSOCIATE, 0x18000002), + OID_STRUCT_MLME(DOT11_OID_ASSOCIATE, 0x18000003), + OID_UNKNOWN(DOT11_OID_SCAN, 0x18000004), + OID_STRUCT_MLMEEX(DOT11_OID_BEACON, 0x18000005), + OID_STRUCT_MLMEEX(DOT11_OID_PROBE, 0x18000006), + OID_STRUCT_MLMEEX(DOT11_OID_DEAUTHENTICATEEX, 0x18000007), + OID_STRUCT_MLMEEX(DOT11_OID_AUTHENTICATEEX, 0x18000008), + OID_STRUCT_MLMEEX(DOT11_OID_DISASSOCIATEEX, 0x18000009), + OID_STRUCT_MLMEEX(DOT11_OID_ASSOCIATEEX, 0x1800000A), + OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATE, 0x1800000B), + OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATEEX, 0x1800000C), + + OID_U32(DOT11_OID_NONERPSTATUS, 0x1E000000), + + OID_U32(DOT11_OID_STATIMEOUT, 0x19000000), + OID_U32_C(DOT11_OID_MLMEAUTOLEVEL, 0x19000001), + OID_U32(DOT11_OID_BSSTIMEOUT, 0x19000002), + [DOT11_OID_ATTACHMENT] = {0x19000003, 0, + sizeof(struct obj_attachment), OID_TYPE_ATTACH}, + OID_STRUCT_C(DOT11_OID_PSMBUFFER, 0x19000004, struct obj_buffer, + OID_TYPE_BUFFER), + + OID_U32(DOT11_OID_BSSS, 0x1C000000), + [DOT11_OID_BSSX] = {0x1C000001, 63, sizeof (struct obj_bss), + OID_TYPE_BSS}, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */ + OID_STRUCT(DOT11_OID_BSSFIND, 0x1C000042, struct obj_bss, OID_TYPE_BSS), + [DOT11_OID_BSSLIST] = {0x1C000043, 0, sizeof (struct + obj_bsslist) + + sizeof (struct obj_bss[IWMAX_BSS]), + OID_TYPE_BSSLIST}, + + OID_UNKNOWN(OID_INL_TUNNEL, 0xFF020000), + OID_UNKNOWN(OID_INL_MEMADDR, 0xFF020001), + OID_UNKNOWN(OID_INL_MEMORY, 0xFF020002), + OID_U32_C(OID_INL_MODE, 0xFF020003), + OID_UNKNOWN(OID_INL_COMPONENT_NR, 0xFF020004), + OID_STRUCT(OID_INL_VERSION, 0xFF020005, u8[8], OID_TYPE_RAW), + OID_UNKNOWN(OID_INL_INTERFACE_ID, 0xFF020006), + OID_UNKNOWN(OID_INL_COMPONENT_ID, 0xFF020007), + OID_U32_C(OID_INL_CONFIG, 0xFF020008), + OID_U32_C(OID_INL_DOT11D_CONFORMANCE, 0xFF02000C), + OID_U32(OID_INL_PHYCAPABILITIES, 0xFF02000D), + OID_U32_C(OID_INL_OUTPUTPOWER, 0xFF02000F), + +}; + +int +mgt_init(islpci_private *priv) +{ + int i; + + priv->mib = kmalloc(OID_NUM_LAST * sizeof (void *), GFP_KERNEL); + if (!priv->mib) + return -ENOMEM; + + memset(priv->mib, 0, OID_NUM_LAST * sizeof (void *)); + + /* Alloc the cache */ + for (i = 0; i < OID_NUM_LAST; i++) { + if (isl_oid[i].flags & OID_FLAG_CACHED) { + priv->mib[i] = kmalloc(isl_oid[i].size * + (isl_oid[i].range + 1), + GFP_KERNEL); + if (!priv->mib[i]) + return -ENOMEM; + memset(priv->mib[i], 0, + isl_oid[i].size * (isl_oid[i].range + 1)); + } else + priv->mib[i] = NULL; + } + + init_rwsem(&priv->mib_sem); + prism54_mib_init(priv); + + return 0; +} + +void +mgt_clean(islpci_private *priv) +{ + int i; + + if (!priv->mib) + return; + for (i = 0; i < OID_NUM_LAST; i++) + if (priv->mib[i]) { + kfree(priv->mib[i]); + priv->mib[i] = NULL; + } + kfree(priv->mib); + priv->mib = NULL; +} + +void +mgt_le_to_cpu(int type, void *data) +{ + switch (type) { + case OID_TYPE_U32: + *(u32 *) data = le32_to_cpu(*(u32 *) data); + break; + case OID_TYPE_BUFFER:{ + struct obj_buffer *buff = data; + buff->size = le32_to_cpu(buff->size); + buff->addr = le32_to_cpu(buff->addr); + break; + } + case OID_TYPE_BSS:{ + struct obj_bss *bss = data; + bss->age = le16_to_cpu(bss->age); + bss->channel = le16_to_cpu(bss->channel); + bss->capinfo = le16_to_cpu(bss->capinfo); + bss->rates = le16_to_cpu(bss->rates); + bss->basic_rates = le16_to_cpu(bss->basic_rates); + break; + } + case OID_TYPE_BSSLIST:{ + struct obj_bsslist *list = data; + int i; + list->nr = le32_to_cpu(list->nr); + for (i = 0; i < list->nr; i++) + mgt_le_to_cpu(OID_TYPE_BSS, &list->bsslist[i]); + break; + } + case OID_TYPE_FREQUENCIES:{ + struct obj_frequencies *freq = data; + int i; + freq->nr = le16_to_cpu(freq->nr); + for (i = 0; i < freq->nr; i++) + freq->mhz[i] = le16_to_cpu(freq->mhz[i]); + break; + } + case OID_TYPE_MLME:{ + struct obj_mlme *mlme = data; + mlme->id = le16_to_cpu(mlme->id); + mlme->state = le16_to_cpu(mlme->state); + mlme->code = le16_to_cpu(mlme->code); + break; + } + case OID_TYPE_MLMEEX:{ + struct obj_mlmeex *mlme = data; + mlme->id = le16_to_cpu(mlme->id); + mlme->state = le16_to_cpu(mlme->state); + mlme->code = le16_to_cpu(mlme->code); + mlme->size = le16_to_cpu(mlme->size); + break; + } + case OID_TYPE_ATTACH:{ + struct obj_attachment *attach = data; + attach->id = le16_to_cpu(attach->id); + attach->size = le16_to_cpu(attach->size);; + break; + } + case OID_TYPE_SSID: + case OID_TYPE_KEY: + case OID_TYPE_ADDR: + case OID_TYPE_RAW: + break; + default: + BUG(); + } +} + +static void +mgt_cpu_to_le(int type, void *data) +{ + switch (type) { + case OID_TYPE_U32: + *(u32 *) data = cpu_to_le32(*(u32 *) data); + break; + case OID_TYPE_BUFFER:{ + struct obj_buffer *buff = data; + buff->size = cpu_to_le32(buff->size); + buff->addr = cpu_to_le32(buff->addr); + break; + } + case OID_TYPE_BSS:{ + struct obj_bss *bss = data; + bss->age = cpu_to_le16(bss->age); + bss->channel = cpu_to_le16(bss->channel); + bss->capinfo = cpu_to_le16(bss->capinfo); + bss->rates = cpu_to_le16(bss->rates); + bss->basic_rates = cpu_to_le16(bss->basic_rates); + break; + } + case OID_TYPE_BSSLIST:{ + struct obj_bsslist *list = data; + int i; + list->nr = cpu_to_le32(list->nr); + for (i = 0; i < list->nr; i++) + mgt_cpu_to_le(OID_TYPE_BSS, &list->bsslist[i]); + break; + } + case OID_TYPE_FREQUENCIES:{ + struct obj_frequencies *freq = data; + int i; + freq->nr = cpu_to_le16(freq->nr); + for (i = 0; i < freq->nr; i++) + freq->mhz[i] = cpu_to_le16(freq->mhz[i]); + break; + } + case OID_TYPE_MLME:{ + struct obj_mlme *mlme = data; + mlme->id = cpu_to_le16(mlme->id); + mlme->state = cpu_to_le16(mlme->state); + mlme->code = cpu_to_le16(mlme->code); + break; + } + case OID_TYPE_MLMEEX:{ + struct obj_mlmeex *mlme = data; + mlme->id = cpu_to_le16(mlme->id); + mlme->state = cpu_to_le16(mlme->state); + mlme->code = cpu_to_le16(mlme->code); + mlme->size = cpu_to_le16(mlme->size); + break; + } + case OID_TYPE_ATTACH:{ + struct obj_attachment *attach = data; + attach->id = cpu_to_le16(attach->id); + attach->size = cpu_to_le16(attach->size);; + break; + } + case OID_TYPE_SSID: + case OID_TYPE_KEY: + case OID_TYPE_ADDR: + case OID_TYPE_RAW: + break; + default: + BUG(); + } +} + +/* Note : data is modified during this function */ + +int +mgt_set_request(islpci_private *priv, enum oid_num_t n, int extra, void *data) +{ + int ret = 0; + struct islpci_mgmtframe *response = NULL; + int response_op = PIMFOR_OP_ERROR; + int dlen; + void *cache, *_data = data; + u32 oid; + + BUG_ON(OID_NUM_LAST <= n); + BUG_ON(extra > isl_oid[n].range); + + if (!priv->mib) + /* memory has been freed */ + return -1; + + dlen = isl_oid[n].size; + cache = priv->mib[n]; + cache += (cache ? extra * dlen : 0); + oid = isl_oid[n].oid + extra; + + if (_data == NULL) + /* we are requested to re-set a cached value */ + _data = cache; + else + mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, _data); + /* If we are going to write to the cache, we don't want anyone to read + * it -> acquire write lock. + * Else we could acquire a read lock to be sure we don't bother the + * commit process (which takes a write lock). But I'm not sure if it's + * needed. + */ + if (cache) + down_write(&priv->mib_sem); + + if (islpci_get_state(priv) >= PRV_STATE_READY) { + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid, + _data, dlen, &response); + if (!ret) { + response_op = response->header->operation; + islpci_mgt_release(response); + } + if (ret || response_op == PIMFOR_OP_ERROR) + ret = -EIO; + } else if (!cache) + ret = -EIO; + + if (cache) { + if (!ret && data) + memcpy(cache, _data, dlen); + up_write(&priv->mib_sem); + } + + /* re-set given data to what it was */ + if (data) + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data); + + return ret; +} + +/* None of these are cached */ +int +mgt_set_varlen(islpci_private *priv, enum oid_num_t n, void *data, int extra_len) +{ + int ret = 0; + struct islpci_mgmtframe *response; + int response_op = PIMFOR_OP_ERROR; + int dlen; + u32 oid; + + BUG_ON(OID_NUM_LAST <= n); + + dlen = isl_oid[n].size; + oid = isl_oid[n].oid; + + mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, data); + + if (islpci_get_state(priv) >= PRV_STATE_READY) { + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid, + data, dlen + extra_len, &response); + if (!ret) { + response_op = response->header->operation; + islpci_mgt_release(response); + } + if (ret || response_op == PIMFOR_OP_ERROR) + ret = -EIO; + } else + ret = -EIO; + + /* re-set given data to what it was */ + if (data) + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data); + + return ret; +} + +int +mgt_get_request(islpci_private *priv, enum oid_num_t n, int extra, void *data, + union oid_res_t *res) +{ + + int ret = -EIO; + int reslen = 0; + struct islpci_mgmtframe *response = NULL; + + int dlen; + void *cache, *_res = NULL; + u32 oid; + + BUG_ON(OID_NUM_LAST <= n); + BUG_ON(extra > isl_oid[n].range); + + res->ptr = NULL; + + if (!priv->mib) + /* memory has been freed */ + return -1; + + dlen = isl_oid[n].size; + cache = priv->mib[n]; + cache += cache ? extra * dlen : 0; + oid = isl_oid[n].oid + extra; + reslen = dlen; + + if (cache) + down_read(&priv->mib_sem); + + if (islpci_get_state(priv) >= PRV_STATE_READY) { + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, + oid, data, dlen, &response); + if (ret || !response || + response->header->operation == PIMFOR_OP_ERROR) { + if (response) + islpci_mgt_release(response); + ret = -EIO; + } + if (!ret) { + _res = response->data; + reslen = response->header->length; + } + } else if (cache) { + _res = cache; + ret = 0; + } + if ((isl_oid[n].flags & OID_FLAG_TYPE) == OID_TYPE_U32) + res->u = ret ? 0 : le32_to_cpu(*(u32 *) _res); + else { + res->ptr = kmalloc(reslen, GFP_KERNEL); + BUG_ON(res->ptr == NULL); + if (ret) + memset(res->ptr, 0, reslen); + else { + memcpy(res->ptr, _res, reslen); + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, + res->ptr); + } + } + if (cache) + up_read(&priv->mib_sem); + + if (response && !ret) + islpci_mgt_release(response); + + if (reslen > isl_oid[n].size) + printk(KERN_DEBUG + "mgt_get_request(0x%x): received data length was bigger " + "than expected (%d > %d). Memory is probably corrupted...", + oid, reslen, isl_oid[n].size); + + return ret; +} + +/* lock outside */ +int +mgt_commit_list(islpci_private *priv, enum oid_num_t *l, int n) +{ + int i, ret = 0; + struct islpci_mgmtframe *response; + + for (i = 0; i < n; i++) { + struct oid_t *t = &(isl_oid[l[i]]); + void *data = priv->mib[l[i]]; + int j = 0; + u32 oid = t->oid; + BUG_ON(data == NULL); + while (j <= t->range) { + int r = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, + oid, data, t->size, + &response); + if (response) { + r |= (response->header->operation == PIMFOR_OP_ERROR); + islpci_mgt_release(response); + } + if (r) + printk(KERN_ERR "%s: mgt_commit_list: failure. " + "oid=%08x err=%d\n", + priv->ndev->name, oid, r); + ret |= r; + j++; + oid++; + data += t->size; + } + } + return ret; +} + +/* Lock outside */ + +void +mgt_set(islpci_private *priv, enum oid_num_t n, void *data) +{ + BUG_ON(OID_NUM_LAST <= n); + BUG_ON(priv->mib[n] == NULL); + + memcpy(priv->mib[n], data, isl_oid[n].size); + mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, priv->mib[n]); +} + +void +mgt_get(islpci_private *priv, enum oid_num_t n, void *res) +{ + BUG_ON(OID_NUM_LAST <= n); + BUG_ON(priv->mib[n] == NULL); + BUG_ON(res == NULL); + + memcpy(res, priv->mib[n], isl_oid[n].size); + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, res); +} + +/* Commits the cache. Lock outside. */ + +static enum oid_num_t commit_part1[] = { + OID_INL_CONFIG, + OID_INL_MODE, + DOT11_OID_BSSTYPE, + DOT11_OID_CHANNEL, + DOT11_OID_MLMEAUTOLEVEL +}; + +static enum oid_num_t commit_part2[] = { + DOT11_OID_SSID, + DOT11_OID_PSMBUFFER, + DOT11_OID_AUTHENABLE, + DOT11_OID_PRIVACYINVOKED, + DOT11_OID_EXUNENCRYPTED, + DOT11_OID_DEFKEYX, /* MULTIPLE */ + DOT11_OID_DEFKEYID, + DOT11_OID_DOT1XENABLE, + OID_INL_DOT11D_CONFORMANCE, + /* Do not initialize this - fw < 1.0.4.3 rejects it + OID_INL_OUTPUTPOWER, + */ +}; + +/* update the MAC addr. */ +static int +mgt_update_addr(islpci_private *priv) +{ + struct islpci_mgmtframe *res; + int ret; + + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, + isl_oid[GEN_OID_MACADDRESS].oid, NULL, + isl_oid[GEN_OID_MACADDRESS].size, &res); + + if ((ret == 0) && res && (res->header->operation != PIMFOR_OP_ERROR)) + memcpy(priv->ndev->dev_addr, res->data, 6); + else + ret = -EIO; + if (res) + islpci_mgt_release(res); + + if (ret) + printk(KERN_ERR "%s: mgt_update_addr: failure\n", priv->ndev->name); + return ret; +} + +#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0])) + +int +mgt_commit(islpci_private *priv) +{ + int rvalue; + u32 u; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + rvalue = mgt_commit_list(priv, commit_part1, VEC_SIZE(commit_part1)); + + if (priv->iw_mode != IW_MODE_MONITOR) + rvalue |= mgt_commit_list(priv, commit_part2, VEC_SIZE(commit_part2)); + + u = OID_INL_MODE; + rvalue |= mgt_commit_list(priv, &u, 1); + rvalue |= mgt_update_addr(priv); + + if (rvalue) { + /* some request have failed. The device might be in an + incoherent state. We should reset it ! */ + printk(KERN_DEBUG "%s: mgt_commit: failure\n", priv->ndev->name); + } + return rvalue; +} + +/* The following OIDs need to be "unlatched": + * + * MEDIUMLIMIT,BEACONPERIOD,DTIMPERIOD,ATIMWINDOW,LISTENINTERVAL + * FREQUENCY,EXTENDEDRATES. + * + * The way to do this is to set ESSID. Note though that they may get + * unlatch before though by setting another OID. */ +#if 0 +void +mgt_unlatch_all(islpci_private *priv) +{ + u32 u; + int rvalue = 0; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return; + + u = DOT11_OID_SSID; + rvalue = mgt_commit_list(priv, &u, 1); + /* Necessary if in MANUAL RUN mode? */ +#if 0 + u = OID_INL_MODE; + rvalue |= mgt_commit_list(priv, &u, 1); + + u = DOT11_OID_MLMEAUTOLEVEL; + rvalue |= mgt_commit_list(priv, &u, 1); + + u = OID_INL_MODE; + rvalue |= mgt_commit_list(priv, &u, 1); +#endif + + if (rvalue) + printk(KERN_DEBUG "%s: Unlatching OIDs failed\n", priv->ndev->name); +} +#endif + +/* This will tell you if you are allowed to answer a mlme(ex) request .*/ + +int +mgt_mlme_answer(islpci_private *priv) +{ + u32 mlmeautolevel; + /* Acquire a read lock because if we are in a mode change, it's + * possible to answer true, while the card is leaving master to managed + * mode. Answering to a mlme in this situation could hang the card. + */ + down_read(&priv->mib_sem); + mlmeautolevel = + le32_to_cpu(*(u32 *) priv->mib[DOT11_OID_MLMEAUTOLEVEL]); + up_read(&priv->mib_sem); + + return ((priv->iw_mode == IW_MODE_MASTER) && + (mlmeautolevel >= DOT11_MLME_INTERMEDIATE)); +} + +enum oid_num_t +mgt_oidtonum(u32 oid) +{ + int i; + + for (i = 0; i < OID_NUM_LAST; i++) + if (isl_oid[i].oid == oid) + return i; + + printk(KERN_DEBUG "looking for an unknown oid 0x%x", oid); + + return OID_NUM_LAST; +} + +int +mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str) +{ + switch (isl_oid[n].flags & OID_FLAG_TYPE) { + case OID_TYPE_U32: + return snprintf(str, PRIV_STR_SIZE, "%u\n", r->u); + break; + case OID_TYPE_BUFFER:{ + struct obj_buffer *buff = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "size=%u\naddr=0x%X\n", buff->size, + buff->addr); + } + break; + case OID_TYPE_BSS:{ + struct obj_bss *bss = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "age=%u\nchannel=%u\n" + "capinfo=0x%X\nrates=0x%X\n" + "basic_rates=0x%X\n", bss->age, + bss->channel, bss->capinfo, + bss->rates, bss->basic_rates); + } + break; + case OID_TYPE_BSSLIST:{ + struct obj_bsslist *list = r->ptr; + int i, k; + k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr); + for (i = 0; i < list->nr; i++) + k += snprintf(str + k, PRIV_STR_SIZE - k, + "bss[%u] : \nage=%u\nchannel=%u\n" + "capinfo=0x%X\nrates=0x%X\n" + "basic_rates=0x%X\n", + i, list->bsslist[i].age, + list->bsslist[i].channel, + list->bsslist[i].capinfo, + list->bsslist[i].rates, + list->bsslist[i].basic_rates); + return k; + } + break; + case OID_TYPE_FREQUENCIES:{ + struct obj_frequencies *freq = r->ptr; + int i, t; + printk("nr : %u\n", freq->nr); + t = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", freq->nr); + for (i = 0; i < freq->nr; i++) + t += snprintf(str + t, PRIV_STR_SIZE - t, + "mhz[%u]=%u\n", i, freq->mhz[i]); + return t; + } + break; + case OID_TYPE_MLME:{ + struct obj_mlme *mlme = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "id=0x%X\nstate=0x%X\ncode=0x%X\n", + mlme->id, mlme->state, mlme->code); + } + break; + case OID_TYPE_MLMEEX:{ + struct obj_mlmeex *mlme = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "id=0x%X\nstate=0x%X\n" + "code=0x%X\nsize=0x%X\n", mlme->id, + mlme->state, mlme->code, mlme->size); + } + break; + case OID_TYPE_ATTACH:{ + struct obj_attachment *attach = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "id=%d\nsize=%d\n", + attach->id, + attach->size); + } + break; + case OID_TYPE_SSID:{ + struct obj_ssid *ssid = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "length=%u\noctets=%.*s\n", + ssid->length, ssid->length, + ssid->octets); + } + break; + case OID_TYPE_KEY:{ + struct obj_key *key = r->ptr; + int t, i; + t = snprintf(str, PRIV_STR_SIZE, + "type=0x%X\nlength=0x%X\nkey=0x", + key->type, key->length); + for (i = 0; i < key->length; i++) + t += snprintf(str + t, PRIV_STR_SIZE - t, + "%02X:", key->key[i]); + t += snprintf(str + t, PRIV_STR_SIZE - t, "\n"); + return t; + } + break; + case OID_TYPE_RAW: + case OID_TYPE_ADDR:{ + unsigned char *buff = r->ptr; + int t, i; + t = snprintf(str, PRIV_STR_SIZE, "hex data="); + for (i = 0; i < isl_oid[n].size; i++) + t += snprintf(str + t, PRIV_STR_SIZE - t, + "%02X:", buff[i]); + t += snprintf(str + t, PRIV_STR_SIZE - t, "\n"); + return t; + } + break; + default: + BUG(); + } + return 0; +} diff --git a/drivers/net/wireless/prism54/oid_mgt.h b/drivers/net/wireless/prism54/oid_mgt.h new file mode 100644 index 00000000000..92c8a2d4acd --- /dev/null +++ b/drivers/net/wireless/prism54/oid_mgt.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#if !defined(_OID_MGT_H) +#define _OID_MGT_H + +#include "isl_oid.h" +#include "islpci_dev.h" + +extern struct oid_t isl_oid[]; + +int mgt_init(islpci_private *); + +void mgt_clean(islpci_private *); + +/* I don't know where to put these 2 */ +extern const int frequency_list_a[]; +int channel_of_freq(int); + +void mgt_le_to_cpu(int, void *); + +int mgt_set_request(islpci_private *, enum oid_num_t, int, void *); +int mgt_set_varlen(islpci_private *, enum oid_num_t, void *, int); + + +int mgt_get_request(islpci_private *, enum oid_num_t, int, void *, + union oid_res_t *); + +int mgt_commit_list(islpci_private *, enum oid_num_t *, int); + +void mgt_set(islpci_private *, enum oid_num_t, void *); + +void mgt_get(islpci_private *, enum oid_num_t, void *); + +int mgt_commit(islpci_private *); + +int mgt_mlme_answer(islpci_private *); + +enum oid_num_t mgt_oidtonum(u32 oid); + +int mgt_response_to_str(enum oid_num_t, union oid_res_t *, char *); + +#endif /* !defined(_OID_MGT_H) */ +/* EOF */ diff --git a/drivers/net/wireless/prism54/prismcompat.h b/drivers/net/wireless/prism54/prismcompat.h new file mode 100644 index 00000000000..55541c01752 --- /dev/null +++ b/drivers/net/wireless/prism54/prismcompat.h @@ -0,0 +1,44 @@ +/* + * (C) 2004 Margit Schubert-While <margitsw@t-online.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * Compatibility header file to aid support of different kernel versions + */ + +#ifdef PRISM54_COMPAT24 +#include "prismcompat24.h" +#else /* PRISM54_COMPAT24 */ + +#ifndef _PRISM_COMPAT_H +#define _PRISM_COMPAT_H + +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/config.h> +#include <linux/moduleparam.h> +#include <linux/workqueue.h> +#include <linux/compiler.h> + +#ifndef __iomem +#define __iomem +#endif + +#define PRISM_FW_PDEV &priv->pdev->dev + +#endif /* _PRISM_COMPAT_H */ +#endif /* PRISM54_COMPAT24 */ diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c new file mode 100644 index 00000000000..6e5bda56b8f --- /dev/null +++ b/drivers/net/wireless/ray_cs.c @@ -0,0 +1,2957 @@ +/*============================================================================= + * + * A PCMCIA client driver for the Raylink wireless LAN card. + * The starting point for this module was the skeleton.c in the + * PCMCIA 2.9.12 package written by David Hinds, dahinds@users.sourceforge.net + * + * + * Copyright (c) 1998 Corey Thomas (corey@world.std.com) + * + * This driver is free software; you can redistribute it and/or modify + * it under the terms of version 2 only of the GNU General Public License as + * published by the Free Software Foundation. + * + * It is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + * Changes: + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000 + * - reorganize kmallocs in ray_attach, checking all for failure + * and releasing the previous allocations if one fails + * + * Daniele Bellucci <bellucda@tiscali.it> - 07/10/2003 + * - Audit copy_to_user in ioctl(SIOCGIWESSID) + * +=============================================================================*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> +#include <pcmcia/mem_op.h> + +#include <linux/wireless.h> + +#include <asm/io.h> +#include <asm/system.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +/* Warning : these stuff will slow down the driver... */ +#define WIRELESS_SPY /* Enable spying addresses */ +/* Definitions we need for spy */ +typedef struct iw_statistics iw_stats; +typedef struct iw_quality iw_qual; +typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */ + +#include "rayctl.h" +#include "ray_cs.h" + +/* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If + you do not define PCMCIA_DEBUG at all, all the debug code will be + left out. If you compile with PCMCIA_DEBUG=0, the debug code will + be present but disabled -- but it can then be enabled for specific + modules at load time with a 'pc_debug=#' option to insmod. +*/ + +#ifdef RAYLINK_DEBUG +#define PCMCIA_DEBUG RAYLINK_DEBUG +#endif +#ifdef PCMCIA_DEBUG +static int ray_debug; +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +/* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */ +#define DEBUG(n, args...) if (pc_debug>(n)) printk(args); +#else +#define DEBUG(n, args...) +#endif +/** Prototypes based on PCMCIA skeleton driver *******************************/ +static void ray_config(dev_link_t *link); +static void ray_release(dev_link_t *link); +static int ray_event(event_t event, int priority, event_callback_args_t *args); +static dev_link_t *ray_attach(void); +static void ray_detach(dev_link_t *); + +/***** Prototypes indicated by device structure ******************************/ +static int ray_dev_close(struct net_device *dev); +static int ray_dev_config(struct net_device *dev, struct ifmap *map); +static struct net_device_stats *ray_get_stats(struct net_device *dev); +static int ray_dev_init(struct net_device *dev); +static int ray_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); + +static struct ethtool_ops netdev_ethtool_ops; + +static int ray_open(struct net_device *dev); +static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static void ray_update_multi_list(struct net_device *dev, int all); +static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx, + unsigned char *data, int len); +static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type, + unsigned char *data); +static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len); +#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */ +static iw_stats * ray_get_wireless_stats(struct net_device * dev); +#endif /* WIRELESS_EXT > 7 */ + +/***** Prototypes for raylink functions **************************************/ +static int asc_to_int(char a); +static void authenticate(ray_dev_t *local); +static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type); +static void authenticate_timeout(u_long); +static int get_free_ccs(ray_dev_t *local); +static int get_free_tx_ccs(ray_dev_t *local); +static void init_startup_params(ray_dev_t *local); +static int parse_addr(char *in_str, UCHAR *out); +static int ray_hw_xmit(unsigned char* data, int len, struct net_device* dev, UCHAR type); +static int ray_init(struct net_device *dev); +static int interrupt_ecf(ray_dev_t *local, int ccs); +static void ray_reset(struct net_device *dev); +static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len); +static void verify_dl_startup(u_long); + +/* Prototypes for interrpt time functions **********************************/ +static irqreturn_t ray_interrupt (int reg, void *dev_id, struct pt_regs *regs); +static void clear_interrupt(ray_dev_t *local); +static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs, + unsigned int pkt_addr, int rx_len); +static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int len); +static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs); +static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs); +static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs, + unsigned int pkt_addr, int rx_len); +static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned int pkt_addr, + int rx_len); +static void associate(ray_dev_t *local); + +/* Card command functions */ +static int dl_startup_params(struct net_device *dev); +static void join_net(u_long local); +static void start_net(u_long local); +/* void start_net(ray_dev_t *local); */ + +/*===========================================================================*/ +/* Parameters that can be set with 'insmod' */ + +/* ADHOC=0, Infrastructure=1 */ +static int net_type = ADHOC; + +/* Hop dwell time in Kus (1024 us units defined by 802.11) */ +static int hop_dwell = 128; + +/* Beacon period in Kus */ +static int beacon_period = 256; + +/* power save mode (0 = off, 1 = save power) */ +static int psm; + +/* String for network's Extended Service Set ID. 32 Characters max */ +static char *essid; + +/* Default to encapsulation unless translation requested */ +static int translate = 1; + +static int country = USA; + +static int sniffer; + +static int bc; + +/* 48 bit physical card address if overriding card's real physical + * address is required. Since IEEE 802.11 addresses are 48 bits + * like ethernet, an int can't be used, so a string is used. To + * allow use of addresses starting with a decimal digit, the first + * character must be a letter and will be ignored. This letter is + * followed by up to 12 hex digits which are the address. If less + * than 12 digits are used, the address will be left filled with 0's. + * Note that bit 0 of the first byte is the broadcast bit, and evil + * things will happen if it is not 0 in a card address. + */ +static char *phy_addr = NULL; + + +/* The dev_info variable is the "key" that is used to match up this + device driver with appropriate cards, through the card configuration + database. +*/ +static dev_info_t dev_info = "ray_cs"; + +/* A linked list of "instances" of the ray device. Each actual + PCMCIA card corresponds to one device instance, and is described + by one dev_link_t structure (defined in ds.h). +*/ +static dev_link_t *dev_list = NULL; + +/* A dev_link_t structure has fields for most things that are needed + to keep track of a socket, but there will usually be some device + specific information that also needs to be kept track of. The + 'priv' pointer in a dev_link_t structure can be used to point to + a device-specific private data structure, like this. +*/ +static unsigned int ray_mem_speed = 500; + +MODULE_AUTHOR("Corey Thomas <corey@world.std.com>"); +MODULE_DESCRIPTION("Raylink/WebGear wireless LAN driver"); +MODULE_LICENSE("GPL"); + +module_param(net_type, int, 0); +module_param(hop_dwell, int, 0); +module_param(beacon_period, int, 0); +module_param(psm, int, 0); +module_param(essid, charp, 0); +module_param(translate, int, 0); +module_param(country, int, 0); +module_param(sniffer, int, 0); +module_param(bc, int, 0); +module_param(phy_addr, charp, 0); +module_param(ray_mem_speed, int, 0); + +static UCHAR b5_default_startup_parms[] = { + 0, 0, /* Adhoc station */ + 'L','I','N','U','X', 0, 0, 0, /* 32 char ESSID */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 0, /* Active scan, CA Mode */ + 0, 0, 0, 0, 0, 0, /* No default MAC addr */ + 0x7f, 0xff, /* Frag threshold */ + 0x00, 0x80, /* Hop time 128 Kus*/ + 0x01, 0x00, /* Beacon period 256 Kus */ + 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout*/ + 0x1d, 0x82, 0x4e, /* SIFS, DIFS, PIFS */ + 0x7f, 0xff, /* RTS threshold */ + 0x04, 0xe2, 0x38, 0xA4, /* scan_dwell, max_scan_dwell */ + 0x05, /* assoc resp timeout thresh */ + 0x08, 0x02, 0x08, /* adhoc, infra, super cycle max*/ + 0, /* Promiscuous mode */ + 0x0c, 0x0bd, /* Unique word */ + 0x32, /* Slot time */ + 0xff, 0xff, /* roam-low snr, low snr count */ + 0x05, 0xff, /* Infra, adhoc missed bcn thresh */ + 0x01, 0x0b, 0x4f, /* USA, hop pattern, hop pat length */ +/* b4 - b5 differences start here */ + 0x00, 0x3f, /* CW max */ + 0x00, 0x0f, /* CW min */ + 0x04, 0x08, /* Noise gain, limit offset */ + 0x28, 0x28, /* det rssi, med busy offsets */ + 7, /* det sync thresh */ + 0, 2, 2, /* test mode, min, max */ + 0, /* allow broadcast SSID probe resp */ + 0, 0, /* privacy must start, can join */ + 2, 0, 0, 0, 0, 0, 0, 0 /* basic rate set */ +}; + +static UCHAR b4_default_startup_parms[] = { + 0, 0, /* Adhoc station */ + 'L','I','N','U','X', 0, 0, 0, /* 32 char ESSID */ + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 0, /* Active scan, CA Mode */ + 0, 0, 0, 0, 0, 0, /* No default MAC addr */ + 0x7f, 0xff, /* Frag threshold */ + 0x02, 0x00, /* Hop time */ + 0x00, 0x01, /* Beacon period */ + 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout*/ + 0x1d, 0x82, 0xce, /* SIFS, DIFS, PIFS */ + 0x7f, 0xff, /* RTS threshold */ + 0xfb, 0x1e, 0xc7, 0x5c, /* scan_dwell, max_scan_dwell */ + 0x05, /* assoc resp timeout thresh */ + 0x04, 0x02, 0x4, /* adhoc, infra, super cycle max*/ + 0, /* Promiscuous mode */ + 0x0c, 0x0bd, /* Unique word */ + 0x4e, /* Slot time (TBD seems wrong)*/ + 0xff, 0xff, /* roam-low snr, low snr count */ + 0x05, 0xff, /* Infra, adhoc missed bcn thresh */ + 0x01, 0x0b, 0x4e, /* USA, hop pattern, hop pat length */ +/* b4 - b5 differences start here */ + 0x3f, 0x0f, /* CW max, min */ + 0x04, 0x08, /* Noise gain, limit offset */ + 0x28, 0x28, /* det rssi, med busy offsets */ + 7, /* det sync thresh */ + 0, 2, 2 /* test mode, min, max*/ +}; +/*===========================================================================*/ +static unsigned char eth2_llc[] = {0xaa, 0xaa, 3, 0, 0, 0}; + +static char hop_pattern_length[] = { 1, + USA_HOP_MOD, EUROPE_HOP_MOD, + JAPAN_HOP_MOD, KOREA_HOP_MOD, + SPAIN_HOP_MOD, FRANCE_HOP_MOD, + ISRAEL_HOP_MOD, AUSTRALIA_HOP_MOD, + JAPAN_TEST_HOP_MOD +}; + +static char rcsid[] = "Raylink/WebGear wireless LAN - Corey <Thomas corey@world.std.com>"; + +/*============================================================================= + ray_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + The dev_link structure is initialized, but we don't actually + configure the card at this point -- we wait until we receive a + card insertion event. +=============================================================================*/ +static dev_link_t *ray_attach(void) +{ + client_reg_t client_reg; + dev_link_t *link; + ray_dev_t *local; + int ret; + struct net_device *dev; + + DEBUG(1, "ray_attach()\n"); + + /* Initialize the dev_link_t structure */ + link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL); + + if (!link) + return NULL; + + /* Allocate space for private device-specific data */ + dev = alloc_etherdev(sizeof(ray_dev_t)); + + if (!dev) + goto fail_alloc_dev; + + local = dev->priv; + + memset(link, 0, sizeof(struct dev_link_t)); + + /* The io structure describes IO port mapping. None used here */ + link->io.NumPorts1 = 0; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = 5; + + /* Interrupt setup. For PCMCIA, driver takes what's given */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = &ray_interrupt; + + /* General socket configuration */ + link->conf.Attributes = CONF_ENABLE_IRQ; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + link->conf.ConfigIndex = 1; + link->conf.Present = PRESENT_OPTION; + + link->priv = dev; + link->irq.Instance = dev; + + local->finder = link; + local->card_status = CARD_INSERTED; + local->authentication_state = UNAUTHENTICATED; + local->num_multi = 0; + DEBUG(2,"ray_attach link = %p, dev = %p, local = %p, intr = %p\n", + link,dev,local,&ray_interrupt); + + /* Raylink entries in the device structure */ + dev->hard_start_xmit = &ray_dev_start_xmit; + dev->set_config = &ray_dev_config; + dev->get_stats = &ray_get_stats; + dev->do_ioctl = &ray_dev_ioctl; + SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); +#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */ + dev->get_wireless_stats = ray_get_wireless_stats; +#endif + + dev->set_multicast_list = &set_multicast_list; + + DEBUG(2,"ray_cs ray_attach calling ether_setup.)\n"); + SET_MODULE_OWNER(dev); + dev->init = &ray_dev_init; + dev->open = &ray_open; + dev->stop = &ray_dev_close; + netif_stop_queue(dev); + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &ray_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + + DEBUG(2,"ray_cs ray_attach calling pcmcia_register_client(...)\n"); + + init_timer(&local->timer); + + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != 0) { + printk("ray_cs ray_attach RegisterClient unhappy - detaching\n"); + cs_error(link->handle, RegisterClient, ret); + ray_detach(link); + return NULL; + } + DEBUG(2,"ray_cs ray_attach ending\n"); + return link; + +fail_alloc_dev: + kfree(link); + return NULL; +} /* ray_attach */ +/*============================================================================= + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. +=============================================================================*/ +static void ray_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DEBUG(1, "ray_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) break; + if (*linkp == NULL) + return; + + /* If the device is currently configured and active, we won't + actually delete it yet. Instead, it is marked so that when + the release() function is called, that will trigger a proper + detach(). + */ + if (link->state & DEV_CONFIG) + ray_release(link); + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, free pieces */ + *linkp = link->next; + if (link->priv) { + struct net_device *dev = link->priv; + if (link->dev) unregister_netdev(dev); + free_netdev(dev); + } + kfree(link); + DEBUG(2,"ray_cs ray_detach ending\n"); +} /* ray_detach */ +/*============================================================================= + ray_config() is run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + ethernet device available to the system. +=============================================================================*/ +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +#define MAX_TUPLE_SIZE 128 +static void ray_config(dev_link_t *link) +{ + client_handle_t handle = link->handle; + tuple_t tuple; + cisparse_t parse; + int last_fn = 0, last_ret = 0; + int i; + u_char buf[MAX_TUPLE_SIZE]; + win_req_t req; + memreq_t mem; + struct net_device *dev = (struct net_device *)link->priv; + ray_dev_t *local = (ray_dev_t *)dev->priv; + + DEBUG(1, "ray_config(0x%p)\n", link); + + /* This reads the card's CONFIG tuple to find its configuration regs */ + tuple.DesiredTuple = CISTPL_CONFIG; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + tuple.TupleData = buf; + tuple.TupleDataMax = MAX_TUPLE_SIZE; + tuple.TupleOffset = 0; + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Determine card type and firmware version */ + buf[0] = buf[MAX_TUPLE_SIZE - 1] = 0; + tuple.DesiredTuple = CISTPL_VERS_1; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + tuple.TupleData = buf; + tuple.TupleDataMax = MAX_TUPLE_SIZE; + tuple.TupleOffset = 2; + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + + for (i=0; i<tuple.TupleDataLen - 4; i++) + if (buf[i] == 0) buf[i] = ' '; + printk(KERN_INFO "ray_cs Detected: %s\n",buf); + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Now allocate an interrupt line. Note that this does not + actually assign a handler to the interrupt. + */ + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + dev->irq = link->irq.AssignedIRQ; + + /* This actually configures the PCMCIA socket -- setting up + the I/O windows and the interrupt mapping. + */ + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); + +/*** Set up 32k window for shared memory (transmit and control) ************/ + req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + req.Base = 0; + req.Size = 0x8000; + req.AccessSpeed = ray_mem_speed; + CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &link->win)); + mem.CardOffset = 0x0000; mem.Page = 0; + CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); + local->sram = ioremap(req.Base,req.Size); + +/*** Set up 16k window for shared memory (receive buffer) ***************/ + req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + req.Base = 0; + req.Size = 0x4000; + req.AccessSpeed = ray_mem_speed; + CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &local->rmem_handle)); + mem.CardOffset = 0x8000; mem.Page = 0; + CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem)); + local->rmem = ioremap(req.Base,req.Size); + +/*** Set up window for attribute memory ***********************************/ + req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT; + req.Base = 0; + req.Size = 0x1000; + req.AccessSpeed = ray_mem_speed; + CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &local->amem_handle)); + mem.CardOffset = 0x0000; mem.Page = 0; + CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem)); + local->amem = ioremap(req.Base,req.Size); + + DEBUG(3,"ray_config sram=%p\n",local->sram); + DEBUG(3,"ray_config rmem=%p\n",local->rmem); + DEBUG(3,"ray_config amem=%p\n",local->amem); + if (ray_init(dev) < 0) { + ray_release(link); + return; + } + + SET_NETDEV_DEV(dev, &handle_to_dev(handle)); + i = register_netdev(dev); + if (i != 0) { + printk("ray_config register_netdev() failed\n"); + ray_release(link); + return; + } + + strcpy(local->node.dev_name, dev->name); + link->dev = &local->node; + + link->state &= ~DEV_CONFIG_PENDING; + printk(KERN_INFO "%s: RayLink, irq %d, hw_addr ", + dev->name, dev->irq); + for (i = 0; i < 6; i++) + printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n")); + + return; + +cs_failed: + cs_error(link->handle, last_fn, last_ret); + + ray_release(link); +} /* ray_config */ + +static inline struct ccs __iomem *ccs_base(ray_dev_t *dev) +{ + return dev->sram + CCS_BASE; +} + +static inline struct rcs __iomem *rcs_base(ray_dev_t *dev) +{ + /* + * This looks nonsensical, since there is a separate + * RCS_BASE. But the difference between a "struct rcs" + * and a "struct ccs" ends up being in the _index_ off + * the base, so the base pointer is the same for both + * ccs/rcs. + */ + return dev->sram + CCS_BASE; +} + +/*===========================================================================*/ +static int ray_init(struct net_device *dev) +{ + int i; + UCHAR *p; + struct ccs __iomem *pccs; + ray_dev_t *local = (ray_dev_t *)dev->priv; + dev_link_t *link = local->finder; + DEBUG(1, "ray_init(0x%p)\n", dev); + if (!(link->state & DEV_PRESENT)) { + DEBUG(0,"ray_init - device not present\n"); + return -1; + } + + local->net_type = net_type; + local->sta_type = TYPE_STA; + + /* Copy the startup results to local memory */ + memcpy_fromio(&local->startup_res, local->sram + ECF_TO_HOST_BASE,\ + sizeof(struct startup_res_6)); + + /* Check Power up test status and get mac address from card */ + if (local->startup_res.startup_word != 0x80) { + printk(KERN_INFO "ray_init ERROR card status = %2x\n", + local->startup_res.startup_word); + local->card_status = CARD_INIT_ERROR; + return -1; + } + + local->fw_ver = local->startup_res.firmware_version[0]; + local->fw_bld = local->startup_res.firmware_version[1]; + local->fw_var = local->startup_res.firmware_version[2]; + DEBUG(1,"ray_init firmware version %d.%d \n",local->fw_ver, local->fw_bld); + + local->tib_length = 0x20; + if ((local->fw_ver == 5) && (local->fw_bld >= 30)) + local->tib_length = local->startup_res.tib_length; + DEBUG(2,"ray_init tib_length = 0x%02x\n", local->tib_length); + /* Initialize CCS's to buffer free state */ + pccs = ccs_base(local); + for (i=0; i<NUMBER_OF_CCS; i++) { + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + } + init_startup_params(local); + + /* copy mac address to startup parameters */ + if (parse_addr(phy_addr, local->sparm.b4.a_mac_addr)) + { + p = local->sparm.b4.a_mac_addr; + } + else + { + memcpy(&local->sparm.b4.a_mac_addr, + &local->startup_res.station_addr, ADDRLEN); + p = local->sparm.b4.a_mac_addr; + } + + clear_interrupt(local); /* Clear any interrupt from the card */ + local->card_status = CARD_AWAITING_PARAM; + DEBUG(2,"ray_init ending\n"); + return 0; +} /* ray_init */ +/*===========================================================================*/ +/* Download startup parameters to the card and command it to read them */ +static int dl_startup_params(struct net_device *dev) +{ + int ccsindex; + ray_dev_t *local = (ray_dev_t *)dev->priv; + struct ccs __iomem *pccs; + dev_link_t *link = local->finder; + + DEBUG(1,"dl_startup_params entered\n"); + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs dl_startup_params - device not present\n"); + return -1; + } + + /* Copy parameters to host to ECF area */ + if (local->fw_ver == 0x55) + memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b4, + sizeof(struct b4_startup_params)); + else + memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b5, + sizeof(struct b5_startup_params)); + + + /* Fill in the CCS fields for the ECF */ + if ((ccsindex = get_free_ccs(local)) < 0) return -1; + local->dl_param_ccs = ccsindex; + pccs = ccs_base(local) + ccsindex; + writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd); + DEBUG(2,"dl_startup_params start ccsindex = %d\n", local->dl_param_ccs); + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + printk(KERN_INFO "ray dl_startup_params failed - " + "ECF not ready for intr\n"); + local->card_status = CARD_DL_PARAM_ERROR; + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + return -2; + } + local->card_status = CARD_DL_PARAM; + /* Start kernel timer to wait for dl startup to complete. */ + local->timer.expires = jiffies + HZ/2; + local->timer.data = (long)local; + local->timer.function = &verify_dl_startup; + add_timer(&local->timer); + DEBUG(2,"ray_cs dl_startup_params started timer for verify_dl_startup\n"); + return 0; +} /* dl_startup_params */ +/*===========================================================================*/ +static void init_startup_params(ray_dev_t *local) +{ + int i; + + if (country > JAPAN_TEST) country = USA; + else + if (country < USA) country = USA; + /* structure for hop time and beacon period is defined here using + * New 802.11D6.1 format. Card firmware is still using old format + * until version 6. + * Before After + * a_hop_time ms byte a_hop_time ms byte + * a_hop_time 2s byte a_hop_time ls byte + * a_hop_time ls byte a_beacon_period ms byte + * a_beacon_period a_beacon_period ls byte + * + * a_hop_time = uS a_hop_time = KuS + * a_beacon_period = hops a_beacon_period = KuS + */ /* 64ms = 010000 */ + if (local->fw_ver == 0x55) { + memcpy((UCHAR *)&local->sparm.b4, b4_default_startup_parms, + sizeof(struct b4_startup_params)); + /* Translate sane kus input values to old build 4/5 format */ + /* i = hop time in uS truncated to 3 bytes */ + i = (hop_dwell * 1024) & 0xffffff; + local->sparm.b4.a_hop_time[0] = (i >> 16) & 0xff; + local->sparm.b4.a_hop_time[1] = (i >> 8) & 0xff; + local->sparm.b4.a_beacon_period[0] = 0; + local->sparm.b4.a_beacon_period[1] = + ((beacon_period/hop_dwell) - 1) & 0xff; + local->sparm.b4.a_curr_country_code = country; + local->sparm.b4.a_hop_pattern_length = + hop_pattern_length[(int)country] - 1; + if (bc) + { + local->sparm.b4.a_ack_timeout = 0x50; + local->sparm.b4.a_sifs = 0x3f; + } + } + else { /* Version 5 uses real kus values */ + memcpy((UCHAR *)&local->sparm.b5, b5_default_startup_parms, + sizeof(struct b5_startup_params)); + + local->sparm.b5.a_hop_time[0] = (hop_dwell >> 8) & 0xff; + local->sparm.b5.a_hop_time[1] = hop_dwell & 0xff; + local->sparm.b5.a_beacon_period[0] = (beacon_period >> 8) & 0xff; + local->sparm.b5.a_beacon_period[1] = beacon_period & 0xff; + if (psm) + local->sparm.b5.a_power_mgt_state = 1; + local->sparm.b5.a_curr_country_code = country; + local->sparm.b5.a_hop_pattern_length = + hop_pattern_length[(int)country]; + } + + local->sparm.b4.a_network_type = net_type & 0x01; + local->sparm.b4.a_acting_as_ap_status = TYPE_STA; + + if (essid != NULL) + strncpy(local->sparm.b4.a_current_ess_id, essid, ESSID_SIZE); +} /* init_startup_params */ +/*===========================================================================*/ +static void verify_dl_startup(u_long data) +{ + ray_dev_t *local = (ray_dev_t *)data; + struct ccs __iomem *pccs = ccs_base(local) + local->dl_param_ccs; + UCHAR status; + dev_link_t *link = local->finder; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs verify_dl_startup - device not present\n"); + return; + } +#ifdef PCMCIA_DEBUG + if (pc_debug > 2) { + int i; + printk(KERN_DEBUG "verify_dl_startup parameters sent via ccs %d:\n", + local->dl_param_ccs); + for (i=0; i<sizeof(struct b5_startup_params); i++) { + printk(" %2x", (unsigned int) readb(local->sram + HOST_TO_ECF_BASE + i)); + } + printk("\n"); + } +#endif + + status = readb(&pccs->buffer_status); + if (status!= CCS_BUFFER_FREE) + { + printk(KERN_INFO "Download startup params failed. Status = %d\n", + status); + local->card_status = CARD_DL_PARAM_ERROR; + return; + } + if (local->sparm.b4.a_network_type == ADHOC) + start_net((u_long)local); + else + join_net((u_long)local); + + return; +} /* end verify_dl_startup */ +/*===========================================================================*/ +/* Command card to start a network */ +static void start_net(u_long data) +{ + ray_dev_t *local = (ray_dev_t *)data; + struct ccs __iomem *pccs; + int ccsindex; + dev_link_t *link = local->finder; + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs start_net - device not present\n"); + return; + } + /* Fill in the CCS fields for the ECF */ + if ((ccsindex = get_free_ccs(local)) < 0) return; + pccs = ccs_base(local) + ccsindex; + writeb(CCS_START_NETWORK, &pccs->cmd); + writeb(0, &pccs->var.start_network.update_param); + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + DEBUG(1,"ray start net failed - card not ready for intr\n"); + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + return; + } + local->card_status = CARD_DOING_ACQ; + return; +} /* end start_net */ +/*===========================================================================*/ +/* Command card to join a network */ +static void join_net(u_long data) +{ + ray_dev_t *local = (ray_dev_t *)data; + + struct ccs __iomem *pccs; + int ccsindex; + dev_link_t *link = local->finder; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs join_net - device not present\n"); + return; + } + /* Fill in the CCS fields for the ECF */ + if ((ccsindex = get_free_ccs(local)) < 0) return; + pccs = ccs_base(local) + ccsindex; + writeb(CCS_JOIN_NETWORK, &pccs->cmd); + writeb(0, &pccs->var.join_network.update_param); + writeb(0, &pccs->var.join_network.net_initiated); + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + DEBUG(1,"ray join net failed - card not ready for intr\n"); + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + return; + } + local->card_status = CARD_DOING_ACQ; + return; +} +/*============================================================================ + After a card is removed, ray_release() will unregister the net + device, and release the PCMCIA configuration. If the device is + still open, this will be postponed until it is closed. +=============================================================================*/ +static void ray_release(dev_link_t *link) +{ + struct net_device *dev = link->priv; + ray_dev_t *local = dev->priv; + int i; + + DEBUG(1, "ray_release(0x%p)\n", link); + + del_timer(&local->timer); + link->state &= ~DEV_CONFIG; + + iounmap(local->sram); + iounmap(local->rmem); + iounmap(local->amem); + /* Do bother checking to see if these succeed or not */ + i = pcmcia_release_window(link->win); + if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(link->win) ret = %x\n",i); + i = pcmcia_release_window(local->amem_handle); + if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i); + i = pcmcia_release_window(local->rmem_handle); + if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i); + i = pcmcia_release_configuration(link->handle); + if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseConfiguration ret = %x\n",i); + i = pcmcia_release_irq(link->handle, &link->irq); + if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseIRQ ret = %x\n",i); + + DEBUG(2,"ray_release ending\n"); +} + +/*============================================================================= + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. A CARD_REMOVAL event + also sets some flags to discourage the net drivers from trying + to talk to the card any more. + + When a CARD_REMOVAL event is received, we immediately set a flag + to block future accesses to this device. All the functions that + actually access the device should check this flag to make sure + the card is still present. +=============================================================================*/ +static int ray_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + struct net_device *dev = link->priv; + ray_dev_t *local = (ray_dev_t *)dev->priv; + DEBUG(1, "ray_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + netif_device_detach(dev); + if (link->state & DEV_CONFIG) { + ray_release(link); + del_timer(&local->timer); + } + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + ray_config(link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) { + if (link->open) + netif_device_detach(dev); + + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, &link->conf); + if (link->open) { + ray_reset(dev); + netif_device_attach(dev); + } + } + break; + } + return 0; + DEBUG(2,"ray_event ending\n"); +} /* ray_event */ +/*===========================================================================*/ +int ray_dev_init(struct net_device *dev) +{ +#ifdef RAY_IMMEDIATE_INIT + int i; +#endif /* RAY_IMMEDIATE_INIT */ + ray_dev_t *local = dev->priv; + dev_link_t *link = local->finder; + + DEBUG(1,"ray_dev_init(dev=%p)\n",dev); + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_dev_init - device not present\n"); + return -1; + } +#ifdef RAY_IMMEDIATE_INIT + /* Download startup parameters */ + if ( (i = dl_startup_params(dev)) < 0) + { + printk(KERN_INFO "ray_dev_init dl_startup_params failed - " + "returns 0x%x\n",i); + return -1; + } +#else /* RAY_IMMEDIATE_INIT */ + /* Postpone the card init so that we can still configure the card, + * for example using the Wireless Extensions. The init will happen + * in ray_open() - Jean II */ + DEBUG(1,"ray_dev_init: postponing card init to ray_open() ; Status = %d\n", + local->card_status); +#endif /* RAY_IMMEDIATE_INIT */ + + /* copy mac and broadcast addresses to linux device */ + memcpy(&dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN); + memset(dev->broadcast, 0xff, ETH_ALEN); + + DEBUG(2,"ray_dev_init ending\n"); + return 0; +} +/*===========================================================================*/ +static int ray_dev_config(struct net_device *dev, struct ifmap *map) +{ + ray_dev_t *local = dev->priv; + dev_link_t *link = local->finder; + /* Dummy routine to satisfy device structure */ + DEBUG(1,"ray_dev_config(dev=%p,ifmap=%p)\n",dev,map); + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_dev_config - device not present\n"); + return -1; + } + + return 0; +} +/*===========================================================================*/ +static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + ray_dev_t *local = dev->priv; + dev_link_t *link = local->finder; + short length = skb->len; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_dev_start_xmit - device not present\n"); + return -1; + } + DEBUG(3,"ray_dev_start_xmit(skb=%p, dev=%p)\n",skb,dev); + if (local->authentication_state == NEED_TO_AUTH) { + DEBUG(0,"ray_cs Sending authentication request.\n"); + if (!build_auth_frame (local, local->auth_id, OPEN_AUTH_REQUEST)) { + local->authentication_state = AUTHENTICATED; + netif_stop_queue(dev); + return 1; + } + } + + if (length < ETH_ZLEN) + { + skb = skb_padto(skb, ETH_ZLEN); + if (skb == NULL) + return 0; + length = ETH_ZLEN; + } + switch (ray_hw_xmit( skb->data, length, dev, DATA_TYPE)) { + case XMIT_NO_CCS: + case XMIT_NEED_AUTH: + netif_stop_queue(dev); + return 1; + case XMIT_NO_INTR: + case XMIT_MSG_BAD: + case XMIT_OK: + default: + dev->trans_start = jiffies; + dev_kfree_skb(skb); + return 0; + } + return 0; +} /* ray_dev_start_xmit */ +/*===========================================================================*/ +static int ray_hw_xmit(unsigned char* data, int len, struct net_device* dev, + UCHAR msg_type) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + struct ccs __iomem *pccs; + int ccsindex; + int offset; + struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */ + short int addr; /* Address of xmit buffer in card space */ + + DEBUG(3,"ray_hw_xmit(data=%p, len=%d, dev=%p)\n",data,len,dev); + if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) + { + printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",len); + return XMIT_MSG_BAD; + } + switch (ccsindex = get_free_tx_ccs(local)) { + case ECCSBUSY: + DEBUG(2,"ray_hw_xmit tx_ccs table busy\n"); + case ECCSFULL: + DEBUG(2,"ray_hw_xmit No free tx ccs\n"); + case ECARDGONE: + netif_stop_queue(dev); + return XMIT_NO_CCS; + default: + break; + } + addr = TX_BUF_BASE + (ccsindex << 11); + + if (msg_type == DATA_TYPE) { + local->stats.tx_bytes += len; + local->stats.tx_packets++; + } + + ptx = local->sram + addr; + + ray_build_header(local, ptx, msg_type, data); + if (translate) { + offset = translate_frame(local, ptx, data, len); + } + else { /* Encapsulate frame */ + /* TBD TIB length will move address of ptx->var */ + memcpy_toio(&ptx->var, data, len); + offset = 0; + } + + /* fill in the CCS */ + pccs = ccs_base(local) + ccsindex; + len += TX_HEADER_LENGTH + offset; + writeb(CCS_TX_REQUEST, &pccs->cmd); + writeb(addr >> 8, &pccs->var.tx_request.tx_data_ptr[0]); + writeb(local->tib_length, &pccs->var.tx_request.tx_data_ptr[1]); + writeb(len >> 8, &pccs->var.tx_request.tx_data_length[0]); + writeb(len & 0xff, &pccs->var.tx_request.tx_data_length[1]); +/* TBD still need psm_cam? */ + writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode); + writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate); + writeb(0, &pccs->var.tx_request.antenna); + DEBUG(3,"ray_hw_xmit default_tx_rate = 0x%x\n",\ + local->net_default_tx_rate); + + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + DEBUG(2,"ray_hw_xmit failed - ECF not ready for intr\n"); +/* TBD very inefficient to copy packet to buffer, and then not + send it, but the alternative is to queue the messages and that + won't be done for a while. Maybe set tbusy until a CCS is free? +*/ + writeb(CCS_BUFFER_FREE, &pccs->buffer_status); + return XMIT_NO_INTR; + } + return XMIT_OK; +} /* end ray_hw_xmit */ +/*===========================================================================*/ +static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx, unsigned char *data, + int len) +{ + unsigned short int proto = ((struct ethhdr *)data)->h_proto; + if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */ + DEBUG(3,"ray_cs translate_frame DIX II\n"); + /* Copy LLC header to card buffer */ + memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc)); + memcpy_toio( ((void __iomem *)&ptx->var) + sizeof(eth2_llc), (UCHAR *)&proto, 2); + if ((proto == 0xf380) || (proto == 0x3781)) { + /* This is the selective translation table, only 2 entries */ + writeb(0xf8, &((struct snaphdr_t __iomem *)ptx->var)->org[3]); + } + /* Copy body of ethernet packet without ethernet header */ + memcpy_toio((void __iomem *)&ptx->var + sizeof(struct snaphdr_t), \ + data + ETH_HLEN, len - ETH_HLEN); + return (int) sizeof(struct snaphdr_t) - ETH_HLEN; + } + else { /* already 802 type, and proto is length */ + DEBUG(3,"ray_cs translate_frame 802\n"); + if (proto == 0xffff) { /* evil netware IPX 802.3 without LLC */ + DEBUG(3,"ray_cs translate_frame evil IPX\n"); + memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN); + return 0 - ETH_HLEN; + } + memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN); + return 0 - ETH_HLEN; + } + /* TBD do other frame types */ +} /* end translate_frame */ +/*===========================================================================*/ +static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type, + unsigned char *data) +{ + writeb(PROTOCOL_VER | msg_type, &ptx->mac.frame_ctl_1); +/*** IEEE 802.11 Address field assignments ************* + TODS FROMDS addr_1 addr_2 addr_3 addr_4 +Adhoc 0 0 dest src (terminal) BSSID N/A +AP to Terminal 0 1 dest AP(BSSID) source N/A +Terminal to AP 1 0 AP(BSSID) src (terminal) dest N/A +AP to AP 1 1 dest AP src AP dest source +*******************************************************/ + if (local->net_type == ADHOC) { + writeb(0, &ptx->mac.frame_ctl_2); + memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest, 2 * ADDRLEN); + memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN); + } + else /* infrastructure */ + { + if (local->sparm.b4.a_acting_as_ap_status) + { + writeb(FC2_FROM_DS, &ptx->mac.frame_ctl_2); + memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest, ADDRLEN); + memcpy_toio(ptx->mac.addr_2, local->bss_id, 6); + memcpy_toio(ptx->mac.addr_3, ((struct ethhdr *)data)->h_source, ADDRLEN); + } + else /* Terminal */ + { + writeb(FC2_TO_DS, &ptx->mac.frame_ctl_2); + memcpy_toio(ptx->mac.addr_1, local->bss_id, ADDRLEN); + memcpy_toio(ptx->mac.addr_2, ((struct ethhdr *)data)->h_source, ADDRLEN); + memcpy_toio(ptx->mac.addr_3, ((struct ethhdr *)data)->h_dest, ADDRLEN); + } + } +} /* end encapsulate_frame */ + + +/*===========================================================================*/ + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, "ray_cs"); +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, +}; + +/*====================================================================*/ + +static int ray_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + dev_link_t *link = local->finder; + int err = 0; +#if WIRELESS_EXT > 7 + struct iwreq *wrq = (struct iwreq *) ifr; +#endif /* WIRELESS_EXT > 7 */ +#ifdef WIRELESS_SPY + struct sockaddr address[IW_MAX_SPY]; +#endif /* WIRELESS_SPY */ + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_dev_ioctl - device not present\n"); + return -1; + } + DEBUG(2,"ray_cs IOCTL dev=%p, ifr=%p, cmd = 0x%x\n",dev,ifr,cmd); + /* Validate the command */ + switch (cmd) + { +#if WIRELESS_EXT > 7 + /* --------------- WIRELESS EXTENSIONS --------------- */ + /* Get name */ + case SIOCGIWNAME: + strcpy(wrq->u.name, "IEEE 802.11-FH"); + break; + + /* Get frequency/channel */ + case SIOCGIWFREQ: + wrq->u.freq.m = local->sparm.b5.a_hop_pattern; + wrq->u.freq.e = 0; + break; + + /* Set frequency/channel */ + case SIOCSIWFREQ: + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + { + err = -EBUSY; + break; + } + + /* Setting by channel number */ + if ((wrq->u.freq.m > USA_HOP_MOD) || (wrq->u.freq.e > 0)) + err = -EOPNOTSUPP; + else + local->sparm.b5.a_hop_pattern = wrq->u.freq.m; + break; + + /* Get current network name (ESSID) */ + case SIOCGIWESSID: + if (wrq->u.data.pointer) + { + char essid[IW_ESSID_MAX_SIZE + 1]; + /* Get the essid that was set */ + memcpy(essid, local->sparm.b5.a_current_ess_id, + IW_ESSID_MAX_SIZE); + essid[IW_ESSID_MAX_SIZE] = '\0'; + + /* Push it out ! */ + wrq->u.data.length = strlen(essid) + 1; + wrq->u.data.flags = 1; /* active */ + if (copy_to_user(wrq->u.data.pointer, essid, sizeof(essid))) + err = -EFAULT; + } + break; + + /* Set desired network name (ESSID) */ + case SIOCSIWESSID: + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + { + err = -EBUSY; + break; + } + + if (wrq->u.data.pointer) + { + char card_essid[IW_ESSID_MAX_SIZE + 1]; + + /* Check if we asked for `any' */ + if(wrq->u.data.flags == 0) + { + /* Corey : can you do that ? */ + err = -EOPNOTSUPP; + } + else + { + /* Check the size of the string */ + if(wrq->u.data.length > + IW_ESSID_MAX_SIZE + 1) + { + err = -E2BIG; + break; + } + if (copy_from_user(card_essid, + wrq->u.data.pointer, + wrq->u.data.length)) { + err = -EFAULT; + break; + } + card_essid[IW_ESSID_MAX_SIZE] = '\0'; + + /* Set the ESSID in the card */ + memcpy(local->sparm.b5.a_current_ess_id, card_essid, + IW_ESSID_MAX_SIZE); + } + } + break; + + /* Get current Access Point (BSSID in our case) */ + case SIOCGIWAP: + memcpy(wrq->u.ap_addr.sa_data, local->bss_id, ETH_ALEN); + wrq->u.ap_addr.sa_family = ARPHRD_ETHER; + break; + + /* Get the current bit-rate */ + case SIOCGIWRATE: + if(local->net_default_tx_rate == 3) + wrq->u.bitrate.value = 2000000; /* Hum... */ + else + wrq->u.bitrate.value = local->net_default_tx_rate * 500000; + wrq->u.bitrate.fixed = 0; /* We are in auto mode */ + break; + + /* Set the desired bit-rate */ + case SIOCSIWRATE: + /* Check if rate is in range */ + if((wrq->u.bitrate.value != 1000000) && + (wrq->u.bitrate.value != 2000000)) + { + err = -EINVAL; + break; + } + /* Hack for 1.5 Mb/s instead of 2 Mb/s */ + if((local->fw_ver == 0x55) && /* Please check */ + (wrq->u.bitrate.value == 2000000)) + local->net_default_tx_rate = 3; + else + local->net_default_tx_rate = wrq->u.bitrate.value/500000; + break; + + /* Get the current RTS threshold */ + case SIOCGIWRTS: + wrq->u.rts.value = (local->sparm.b5.a_rts_threshold[0] << 8) + + local->sparm.b5.a_rts_threshold[1]; +#if WIRELESS_EXT > 8 + wrq->u.rts.disabled = (wrq->u.rts.value == 32767); +#endif /* WIRELESS_EXT > 8 */ + wrq->u.rts.fixed = 1; + break; + + /* Set the desired RTS threshold */ + case SIOCSIWRTS: + { + int rthr = wrq->u.rts.value; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + { + err = -EBUSY; + break; + } + + /* if(wrq->u.rts.fixed == 0) we should complain */ +#if WIRELESS_EXT > 8 + if(wrq->u.rts.disabled) + rthr = 32767; + else +#endif /* WIRELESS_EXT > 8 */ + if((rthr < 0) || (rthr > 2347)) /* What's the max packet size ??? */ + { + err = -EINVAL; + break; + } + local->sparm.b5.a_rts_threshold[0] = (rthr >> 8) & 0xFF; + local->sparm.b5.a_rts_threshold[1] = rthr & 0xFF; + } + break; + + /* Get the current fragmentation threshold */ + case SIOCGIWFRAG: + wrq->u.frag.value = (local->sparm.b5.a_frag_threshold[0] << 8) + + local->sparm.b5.a_frag_threshold[1]; +#if WIRELESS_EXT > 8 + wrq->u.frag.disabled = (wrq->u.frag.value == 32767); +#endif /* WIRELESS_EXT > 8 */ + wrq->u.frag.fixed = 1; + break; + + /* Set the desired fragmentation threshold */ + case SIOCSIWFRAG: + { + int fthr = wrq->u.frag.value; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + { + err = -EBUSY; + break; + } + + /* if(wrq->u.frag.fixed == 0) should complain */ +#if WIRELESS_EXT > 8 + if(wrq->u.frag.disabled) + fthr = 32767; + else +#endif /* WIRELESS_EXT > 8 */ + if((fthr < 256) || (fthr > 2347)) /* To check out ! */ + { + err = -EINVAL; + break; + } + local->sparm.b5.a_frag_threshold[0] = (fthr >> 8) & 0xFF; + local->sparm.b5.a_frag_threshold[1] = fthr & 0xFF; + } + break; + +#endif /* WIRELESS_EXT > 7 */ +#if WIRELESS_EXT > 8 + + /* Get the current mode of operation */ + case SIOCGIWMODE: + if(local->sparm.b5.a_network_type) + wrq->u.mode = IW_MODE_INFRA; + else + wrq->u.mode = IW_MODE_ADHOC; + break; + + /* Set the current mode of operation */ + case SIOCSIWMODE: + { + char card_mode = 1; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + { + err = -EBUSY; + break; + } + + switch (wrq->u.mode) + { + case IW_MODE_ADHOC: + card_mode = 0; + // Fall through + case IW_MODE_INFRA: + local->sparm.b5.a_network_type = card_mode; + break; + default: + err = -EINVAL; + } + } + break; + +#endif /* WIRELESS_EXT > 8 */ +#if WIRELESS_EXT > 7 + /* ------------------ IWSPY SUPPORT ------------------ */ + /* Define the range (variations) of above parameters */ + case SIOCGIWRANGE: + /* Basic checking... */ + if(wrq->u.data.pointer != (caddr_t) 0) + { + struct iw_range range; + memset((char *) &range, 0, sizeof(struct iw_range)); + + /* Set the length (very important for backward compatibility) */ + wrq->u.data.length = sizeof(struct iw_range); + +#if WIRELESS_EXT > 10 + /* Set the Wireless Extension versions */ + range.we_version_compiled = WIRELESS_EXT; + range.we_version_source = 9; +#endif /* WIRELESS_EXT > 10 */ + + /* Set information in the range struct */ + range.throughput = 1.1 * 1000 * 1000; /* Put the right number here */ + range.num_channels = hop_pattern_length[(int)country]; + range.num_frequency = 0; + range.max_qual.qual = 0; + range.max_qual.level = 255; /* What's the correct value ? */ + range.max_qual.noise = 255; /* Idem */ + range.num_bitrates = 2; + range.bitrate[0] = 1000000; /* 1 Mb/s */ + range.bitrate[1] = 2000000; /* 2 Mb/s */ + + /* Copy structure to the user buffer */ + if(copy_to_user(wrq->u.data.pointer, &range, + sizeof(struct iw_range))) + err = -EFAULT; + } + break; + +#ifdef WIRELESS_SPY + /* Set addresses to spy */ + case SIOCSIWSPY: + /* Check the number of addresses */ + if(wrq->u.data.length > IW_MAX_SPY) + { + err = -E2BIG; + break; + } + local->spy_number = wrq->u.data.length; + + /* If there is some addresses to copy */ + if(local->spy_number > 0) + { + int i; + + /* Copy addresses to the driver */ + if(copy_from_user(address, wrq->u.data.pointer, + sizeof(struct sockaddr) * local->spy_number)) + { + err = -EFAULT; + break; + } + + /* Copy addresses to the lp structure */ + for(i = 0; i < local->spy_number; i++) + memcpy(local->spy_address[i], address[i].sa_data, ETH_ALEN); + + /* Reset structure... */ + memset(local->spy_stat, 0x00, sizeof(iw_qual) * IW_MAX_SPY); + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "SetSpy - Set of new addresses is :\n"); + for(i = 0; i < local->spy_number; i++) + printk(KERN_DEBUG "%02X:%02X:%02X:%02X:%02X:%02X\n", + local->spy_address[i][0], + local->spy_address[i][1], + local->spy_address[i][2], + local->spy_address[i][3], + local->spy_address[i][4], + local->spy_address[i][5]); +#endif /* DEBUG_IOCTL_INFO */ + } + break; + + /* Get the spy list and spy stats */ + case SIOCGIWSPY: + /* Set the number of addresses */ + wrq->u.data.length = local->spy_number; + + /* If the user want to have the addresses back... */ + if((local->spy_number > 0) && (wrq->u.data.pointer != (caddr_t) 0)) + { + int i; + + /* Copy addresses from the lp structure */ + for(i = 0; i < local->spy_number; i++) + { + memcpy(address[i].sa_data, local->spy_address[i], ETH_ALEN); + address[i].sa_family = ARPHRD_ETHER; + } + + /* Copy addresses to the user buffer */ + if(copy_to_user(wrq->u.data.pointer, address, + sizeof(struct sockaddr) * local->spy_number)) + { + err = -EFAULT; + break; + } + + /* Copy stats to the user buffer (just after) */ + if(copy_to_user(wrq->u.data.pointer + + (sizeof(struct sockaddr) * local->spy_number), + local->spy_stat, sizeof(iw_qual) * local->spy_number)) + { + err = -EFAULT; + break; + } + + /* Reset updated flags */ + for(i = 0; i < local->spy_number; i++) + local->spy_stat[i].updated = 0x0; + } /* if(pointer != NULL) */ + + break; +#endif /* WIRELESS_SPY */ + + /* ------------------ PRIVATE IOCTL ------------------ */ +#ifndef SIOCIWFIRSTPRIV +#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE +#endif /* SIOCIWFIRSTPRIV */ +#define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */ +#define SIOCGIPFRAMING SIOCIWFIRSTPRIV + 1 /* Get framing mode */ +#define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */ + case SIOCSIPFRAMING: + if(!capable(CAP_NET_ADMIN)) /* For private IOCTLs, we need to check permissions */ + { + err = -EPERM; + break; + } + translate = *(wrq->u.name); /* Set framing mode */ + break; + case SIOCGIPFRAMING: + *(wrq->u.name) = translate; + break; + case SIOCGIPCOUNTRY: + *(wrq->u.name) = country; + break; + case SIOCGIWPRIV: + /* Export our "private" intercace */ + if(wrq->u.data.pointer != (caddr_t) 0) + { + struct iw_priv_args priv[] = + { /* cmd, set_args, get_args, name */ + { SIOCSIPFRAMING, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "set_framing" }, + { SIOCGIPFRAMING, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_framing" }, + { SIOCGIPCOUNTRY, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_country" }, + }; + /* Set the number of ioctl available */ + wrq->u.data.length = 3; + /* Copy structure to the user buffer */ + if(copy_to_user(wrq->u.data.pointer, (u_char *) priv, + sizeof(priv))) + err = -EFAULT; + } + break; +#endif /* WIRELESS_EXT > 7 */ + + + default: + DEBUG(0,"ray_dev_ioctl cmd = 0x%x\n", cmd); + err = -EOPNOTSUPP; + } + return err; +} /* end ray_dev_ioctl */ +/*===========================================================================*/ +#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */ +static iw_stats * ray_get_wireless_stats(struct net_device * dev) +{ + ray_dev_t * local = (ray_dev_t *) dev->priv; + dev_link_t *link = local->finder; + struct status __iomem *p = local->sram + STATUS_BASE; + + if(local == (ray_dev_t *) NULL) + return (iw_stats *) NULL; + + local->wstats.status = local->card_status; +#ifdef WIRELESS_SPY + if((local->spy_number > 0) && (local->sparm.b5.a_network_type == 0)) + { + /* Get it from the first node in spy list */ + local->wstats.qual.qual = local->spy_stat[0].qual; + local->wstats.qual.level = local->spy_stat[0].level; + local->wstats.qual.noise = local->spy_stat[0].noise; + local->wstats.qual.updated = local->spy_stat[0].updated; + } +#endif /* WIRELESS_SPY */ + + if((link->state & DEV_PRESENT)) { + local->wstats.qual.noise = readb(&p->rxnoise); + local->wstats.qual.updated |= 4; + } + + return &local->wstats; +} /* end ray_get_wireless_stats */ +#endif /* WIRELESS_EXT > 7 */ +/*===========================================================================*/ +static int ray_open(struct net_device *dev) +{ + dev_link_t *link; + ray_dev_t *local = (ray_dev_t *)dev->priv; + + DEBUG(1, "ray_open('%s')\n", dev->name); + + for (link = dev_list; link; link = link->next) + if (link->priv == dev) break; + if (!DEV_OK(link)) { + return -ENODEV; + } + + if (link->open == 0) local->num_multi = 0; + link->open++; + + /* If the card is not started, time to start it ! - Jean II */ + if(local->card_status == CARD_AWAITING_PARAM) { + int i; + + DEBUG(1,"ray_open: doing init now !\n"); + + /* Download startup parameters */ + if ( (i = dl_startup_params(dev)) < 0) + { + printk(KERN_INFO "ray_dev_init dl_startup_params failed - " + "returns 0x%x\n",i); + return -1; + } + } + + if (sniffer) netif_stop_queue(dev); + else netif_start_queue(dev); + + DEBUG(2,"ray_open ending\n"); + return 0; +} /* end ray_open */ +/*===========================================================================*/ +static int ray_dev_close(struct net_device *dev) +{ + dev_link_t *link; + + DEBUG(1, "ray_dev_close('%s')\n", dev->name); + + for (link = dev_list; link; link = link->next) + if (link->priv == dev) break; + if (link == NULL) + return -ENODEV; + + link->open--; + netif_stop_queue(dev); + + /* In here, we should stop the hardware (stop card from beeing active) + * and set local->card_status to CARD_AWAITING_PARAM, so that while the + * card is closed we can chage its configuration. + * Probably also need a COR reset to get sane state - Jean II */ + + return 0; +} /* end ray_dev_close */ +/*===========================================================================*/ +static void ray_reset(struct net_device *dev) { + DEBUG(1,"ray_reset entered\n"); + return; +} +/*===========================================================================*/ +/* Cause a firmware interrupt if it is ready for one */ +/* Return nonzero if not ready */ +static int interrupt_ecf(ray_dev_t *local, int ccs) +{ + int i = 50; + dev_link_t *link = local->finder; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs interrupt_ecf - device not present\n"); + return -1; + } + DEBUG(2,"interrupt_ecf(local=%p, ccs = 0x%x\n",local,ccs); + + while ( i && + (readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) & ECF_INTR_SET)) + i--; + if (i == 0) { + DEBUG(2,"ray_cs interrupt_ecf card not ready for interrupt\n"); + return -1; + } + /* Fill the mailbox, then kick the card */ + writeb(ccs, local->sram + SCB_BASE); + writeb(ECF_INTR_SET, local->amem + CIS_OFFSET + ECF_INTR_OFFSET); + return 0; +} /* interrupt_ecf */ +/*===========================================================================*/ +/* Get next free transmit CCS */ +/* Return - index of current tx ccs */ +static int get_free_tx_ccs(ray_dev_t *local) +{ + int i; + struct ccs __iomem *pccs = ccs_base(local); + dev_link_t *link = local->finder; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs get_free_tx_ccs - device not present\n"); + return ECARDGONE; + } + + if (test_and_set_bit(0,&local->tx_ccs_lock)) { + DEBUG(1,"ray_cs tx_ccs_lock busy\n"); + return ECCSBUSY; + } + + for (i=0; i < NUMBER_OF_TX_CCS; i++) { + if (readb(&(pccs+i)->buffer_status) == CCS_BUFFER_FREE) { + writeb(CCS_BUFFER_BUSY, &(pccs+i)->buffer_status); + writeb(CCS_END_LIST, &(pccs+i)->link); + local->tx_ccs_lock = 0; + return i; + } + } + local->tx_ccs_lock = 0; + DEBUG(2,"ray_cs ERROR no free tx CCS for raylink card\n"); + return ECCSFULL; +} /* get_free_tx_ccs */ +/*===========================================================================*/ +/* Get next free CCS */ +/* Return - index of current ccs */ +static int get_free_ccs(ray_dev_t *local) +{ + int i; + struct ccs __iomem *pccs = ccs_base(local); + dev_link_t *link = local->finder; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs get_free_ccs - device not present\n"); + return ECARDGONE; + } + if (test_and_set_bit(0,&local->ccs_lock)) { + DEBUG(1,"ray_cs ccs_lock busy\n"); + return ECCSBUSY; + } + + for (i = NUMBER_OF_TX_CCS; i < NUMBER_OF_CCS; i++) { + if (readb(&(pccs+i)->buffer_status) == CCS_BUFFER_FREE) { + writeb(CCS_BUFFER_BUSY, &(pccs+i)->buffer_status); + writeb(CCS_END_LIST, &(pccs+i)->link); + local->ccs_lock = 0; + return i; + } + } + local->ccs_lock = 0; + DEBUG(1,"ray_cs ERROR no free CCS for raylink card\n"); + return ECCSFULL; +} /* get_free_ccs */ +/*===========================================================================*/ +static void authenticate_timeout(u_long data) +{ + ray_dev_t *local = (ray_dev_t *)data; + del_timer(&local->timer); + printk(KERN_INFO "ray_cs Authentication with access point failed" + " - timeout\n"); + join_net((u_long)local); +} +/*===========================================================================*/ +static int asc_to_int(char a) +{ + if (a < '0') return -1; + if (a <= '9') return (a - '0'); + if (a < 'A') return -1; + if (a <= 'F') return (10 + a - 'A'); + if (a < 'a') return -1; + if (a <= 'f') return (10 + a - 'a'); + return -1; +} +/*===========================================================================*/ +static int parse_addr(char *in_str, UCHAR *out) +{ + int len; + int i,j,k; + int status; + + if (in_str == NULL) return 0; + if ((len = strlen(in_str)) < 2) return 0; + memset(out, 0, ADDRLEN); + + status = 1; + j = len - 1; + if (j > 12) j = 12; + i = 5; + + while (j > 0) + { + if ((k = asc_to_int(in_str[j--])) != -1) out[i] = k; + else return 0; + + if (j == 0) break; + if ((k = asc_to_int(in_str[j--])) != -1) out[i] += k << 4; + else return 0; + if (!i--) break; + } + return status; +} +/*===========================================================================*/ +static struct net_device_stats *ray_get_stats(struct net_device *dev) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + dev_link_t *link = local->finder; + struct status __iomem *p = local->sram + STATUS_BASE; + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs net_device_stats - device not present\n"); + return &local->stats; + } + if (readb(&p->mrx_overflow_for_host)) + { + local->stats.rx_over_errors += ntohs(readb(&p->mrx_overflow)); + writeb(0,&p->mrx_overflow); + writeb(0,&p->mrx_overflow_for_host); + } + if (readb(&p->mrx_checksum_error_for_host)) + { + local->stats.rx_crc_errors += ntohs(readb(&p->mrx_checksum_error)); + writeb(0,&p->mrx_checksum_error); + writeb(0,&p->mrx_checksum_error_for_host); + } + if (readb(&p->rx_hec_error_for_host)) + { + local->stats.rx_frame_errors += ntohs(readb(&p->rx_hec_error)); + writeb(0,&p->rx_hec_error); + writeb(0,&p->rx_hec_error_for_host); + } + return &local->stats; +} +/*===========================================================================*/ +static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + dev_link_t *link = local->finder; + int ccsindex; + int i; + struct ccs __iomem *pccs; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_update_parm - device not present\n"); + return; + } + + if ((ccsindex = get_free_ccs(local)) < 0) + { + DEBUG(0,"ray_update_parm - No free ccs\n"); + return; + } + pccs = ccs_base(local) + ccsindex; + writeb(CCS_UPDATE_PARAMS, &pccs->cmd); + writeb(objid, &pccs->var.update_param.object_id); + writeb(1, &pccs->var.update_param.number_objects); + writeb(0, &pccs->var.update_param.failure_cause); + for (i=0; i<len; i++) { + writeb(value[i], local->sram + HOST_TO_ECF_BASE); + } + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + DEBUG(0,"ray_cs associate failed - ECF not ready for intr\n"); + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + } +} +/*===========================================================================*/ +static void ray_update_multi_list(struct net_device *dev, int all) +{ + struct dev_mc_list *dmi, **dmip; + int ccsindex; + struct ccs __iomem *pccs; + int i = 0; + ray_dev_t *local = (ray_dev_t *)dev->priv; + dev_link_t *link = local->finder; + void __iomem *p = local->sram + HOST_TO_ECF_BASE; + + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_update_multi_list - device not present\n"); + return; + } + else + DEBUG(2,"ray_update_multi_list(%p)\n",dev); + if ((ccsindex = get_free_ccs(local)) < 0) + { + DEBUG(1,"ray_update_multi - No free ccs\n"); + return; + } + pccs = ccs_base(local) + ccsindex; + writeb(CCS_UPDATE_MULTICAST_LIST, &pccs->cmd); + + if (all) { + writeb(0xff, &pccs->var); + local->num_multi = 0xff; + } + else { + /* Copy the kernel's list of MC addresses to card */ + for (dmip=&dev->mc_list; (dmi=*dmip)!=NULL; dmip=&dmi->next) { + memcpy_toio(p, dmi->dmi_addr, ETH_ALEN); + DEBUG(1,"ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",dmi->dmi_addr[0],dmi->dmi_addr[1],dmi->dmi_addr[2],dmi->dmi_addr[3],dmi->dmi_addr[4],dmi->dmi_addr[5]); + p += ETH_ALEN; + i++; + } + if (i > 256/ADDRLEN) i = 256/ADDRLEN; + writeb((UCHAR)i, &pccs->var); + DEBUG(1,"ray_cs update_multi %d addresses in list\n", i); + /* Interrupt the firmware to process the command */ + local->num_multi = i; + } + if (interrupt_ecf(local, ccsindex)) { + DEBUG(1,"ray_cs update_multi failed - ECF not ready for intr\n"); + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + } +} /* end ray_update_multi_list */ +/*===========================================================================*/ +static void set_multicast_list(struct net_device *dev) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + UCHAR promisc; + + DEBUG(2,"ray_cs set_multicast_list(%p)\n",dev); + + if (dev->flags & IFF_PROMISC) + { + if (local->sparm.b5.a_promiscuous_mode == 0) { + DEBUG(1,"ray_cs set_multicast_list promisc on\n"); + local->sparm.b5.a_promiscuous_mode = 1; + promisc = 1; + ray_update_parm(dev, OBJID_promiscuous_mode, \ + &promisc, sizeof(promisc)); + } + } + else { + if (local->sparm.b5.a_promiscuous_mode == 1) { + DEBUG(1,"ray_cs set_multicast_list promisc off\n"); + local->sparm.b5.a_promiscuous_mode = 0; + promisc = 0; + ray_update_parm(dev, OBJID_promiscuous_mode, \ + &promisc, sizeof(promisc)); + } + } + + if (dev->flags & IFF_ALLMULTI) ray_update_multi_list(dev, 1); + else + { + if (local->num_multi != dev->mc_count) ray_update_multi_list(dev, 0); + } +} /* end set_multicast_list */ +/*============================================================================= + * All routines below here are run at interrupt time. +=============================================================================*/ +static irqreturn_t ray_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + dev_link_t *link; + ray_dev_t *local; + struct ccs __iomem *pccs; + struct rcs __iomem *prcs; + UCHAR rcsindex; + UCHAR tmp; + UCHAR cmd; + UCHAR status; + + if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */ + return IRQ_NONE; + + DEBUG(4,"ray_cs: interrupt for *dev=%p\n",dev); + + local = (ray_dev_t *)dev->priv; + link = (dev_link_t *)local->finder; + if ( ! (link->state & DEV_PRESENT) || link->state & DEV_SUSPEND ) { + DEBUG(2,"ray_cs interrupt from device not present or suspended.\n"); + return IRQ_NONE; + } + rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index); + + if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) + { + DEBUG(1,"ray_cs interrupt bad rcsindex = 0x%x\n",rcsindex); + clear_interrupt(local); + return IRQ_HANDLED; + } + if (rcsindex < NUMBER_OF_CCS) /* If it's a returned CCS */ + { + pccs = ccs_base(local) + rcsindex; + cmd = readb(&pccs->cmd); + status = readb(&pccs->buffer_status); + switch (cmd) + { + case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */ + del_timer(&local->timer); + if (status == CCS_COMMAND_COMPLETE) { + DEBUG(1,"ray_cs interrupt download_startup_parameters OK\n"); + } + else { + DEBUG(1,"ray_cs interrupt download_startup_parameters fail\n"); + } + break; + case CCS_UPDATE_PARAMS: + DEBUG(1,"ray_cs interrupt update params done\n"); + if (status != CCS_COMMAND_COMPLETE) { + tmp = readb(&pccs->var.update_param.failure_cause); + DEBUG(0,"ray_cs interrupt update params failed - reason %d\n",tmp); + } + break; + case CCS_REPORT_PARAMS: + DEBUG(1,"ray_cs interrupt report params done\n"); + break; + case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */ + DEBUG(1,"ray_cs interrupt CCS Update Multicast List done\n"); + break; + case CCS_UPDATE_POWER_SAVINGS_MODE: + DEBUG(1,"ray_cs interrupt update power save mode done\n"); + break; + case CCS_START_NETWORK: + case CCS_JOIN_NETWORK: + if (status == CCS_COMMAND_COMPLETE) { + if (readb(&pccs->var.start_network.net_initiated) == 1) { + DEBUG(0,"ray_cs interrupt network \"%s\" started\n",\ + local->sparm.b4.a_current_ess_id); + } + else { + DEBUG(0,"ray_cs interrupt network \"%s\" joined\n",\ + local->sparm.b4.a_current_ess_id); + } + memcpy_fromio(&local->bss_id,pccs->var.start_network.bssid,ADDRLEN); + + if (local->fw_ver == 0x55) local->net_default_tx_rate = 3; + else local->net_default_tx_rate = + readb(&pccs->var.start_network.net_default_tx_rate); + local->encryption = readb(&pccs->var.start_network.encryption); + if (!sniffer && (local->net_type == INFRA) + && !(local->sparm.b4.a_acting_as_ap_status)) { + authenticate(local); + } + local->card_status = CARD_ACQ_COMPLETE; + } + else { + local->card_status = CARD_ACQ_FAILED; + + del_timer(&local->timer); + local->timer.expires = jiffies + HZ*5; + local->timer.data = (long)local; + if (status == CCS_START_NETWORK) { + DEBUG(0,"ray_cs interrupt network \"%s\" start failed\n",\ + local->sparm.b4.a_current_ess_id); + local->timer.function = &start_net; + } + else { + DEBUG(0,"ray_cs interrupt network \"%s\" join failed\n",\ + local->sparm.b4.a_current_ess_id); + local->timer.function = &join_net; + } + add_timer(&local->timer); + } + break; + case CCS_START_ASSOCIATION: + if (status == CCS_COMMAND_COMPLETE) { + local->card_status = CARD_ASSOC_COMPLETE; + DEBUG(0,"ray_cs association successful\n"); + } + else + { + DEBUG(0,"ray_cs association failed,\n"); + local->card_status = CARD_ASSOC_FAILED; + join_net((u_long)local); + } + break; + case CCS_TX_REQUEST: + if (status == CCS_COMMAND_COMPLETE) { + DEBUG(3,"ray_cs interrupt tx request complete\n"); + } + else { + DEBUG(1,"ray_cs interrupt tx request failed\n"); + } + if (!sniffer) netif_start_queue(dev); + netif_wake_queue(dev); + break; + case CCS_TEST_MEMORY: + DEBUG(1,"ray_cs interrupt mem test done\n"); + break; + case CCS_SHUTDOWN: + DEBUG(1,"ray_cs interrupt Unexpected CCS returned - Shutdown\n"); + break; + case CCS_DUMP_MEMORY: + DEBUG(1,"ray_cs interrupt dump memory done\n"); + break; + case CCS_START_TIMER: + DEBUG(2,"ray_cs interrupt DING - raylink timer expired\n"); + break; + default: + DEBUG(1,"ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",\ + rcsindex, cmd); + } + writeb(CCS_BUFFER_FREE, &pccs->buffer_status); + } + else /* It's an RCS */ + { + prcs = rcs_base(local) + rcsindex; + + switch (readb(&prcs->interrupt_id)) + { + case PROCESS_RX_PACKET: + ray_rx(dev, local, prcs); + break; + case REJOIN_NET_COMPLETE: + DEBUG(1,"ray_cs interrupt rejoin net complete\n"); + local->card_status = CARD_ACQ_COMPLETE; + /* do we need to clear tx buffers CCS's? */ + if (local->sparm.b4.a_network_type == ADHOC) { + if (!sniffer) netif_start_queue(dev); + } + else { + memcpy_fromio(&local->bss_id, prcs->var.rejoin_net_complete.bssid, ADDRLEN); + DEBUG(1,"ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",\ + local->bss_id[0], local->bss_id[1], local->bss_id[2],\ + local->bss_id[3], local->bss_id[4], local->bss_id[5]); + if (!sniffer) authenticate(local); + } + break; + case ROAMING_INITIATED: + DEBUG(1,"ray_cs interrupt roaming initiated\n"); + netif_stop_queue(dev); + local->card_status = CARD_DOING_ACQ; + break; + case JAPAN_CALL_SIGN_RXD: + DEBUG(1,"ray_cs interrupt japan call sign rx\n"); + break; + default: + DEBUG(1,"ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",\ + rcsindex, (unsigned int) readb(&prcs->interrupt_id)); + break; + } + writeb(CCS_BUFFER_FREE, &prcs->buffer_status); + } + clear_interrupt(local); + return IRQ_HANDLED; +} /* ray_interrupt */ +/*===========================================================================*/ +static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs) +{ + int rx_len; + unsigned int pkt_addr; + void __iomem *pmsg; + DEBUG(4,"ray_rx process rx packet\n"); + + /* Calculate address of packet within Rx buffer */ + pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8) + + readb(&prcs->var.rx_packet.rx_data_ptr[1])) & RX_BUFF_END; + /* Length of first packet fragment */ + rx_len = (readb(&prcs->var.rx_packet.rx_data_length[0]) << 8) + + readb(&prcs->var.rx_packet.rx_data_length[1]); + + local->last_rsl = readb(&prcs->var.rx_packet.rx_sig_lev); + pmsg = local->rmem + pkt_addr; + switch(readb(pmsg)) + { + case DATA_TYPE: + DEBUG(4,"ray_rx data type\n"); + rx_data(dev, prcs, pkt_addr, rx_len); + break; + case AUTHENTIC_TYPE: + DEBUG(4,"ray_rx authentic type\n"); + if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len); + else rx_authenticate(local, prcs, pkt_addr, rx_len); + break; + case DEAUTHENTIC_TYPE: + DEBUG(4,"ray_rx deauth type\n"); + if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len); + else rx_deauthenticate(local, prcs, pkt_addr, rx_len); + break; + case NULL_MSG_TYPE: + DEBUG(3,"ray_cs rx NULL msg\n"); + break; + case BEACON_TYPE: + DEBUG(4,"ray_rx beacon type\n"); + if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len); + + copy_from_rx_buff(local, (UCHAR *)&local->last_bcn, pkt_addr, + rx_len < sizeof(struct beacon_rx) ? + rx_len : sizeof(struct beacon_rx)); + + local->beacon_rxed = 1; + /* Get the statistics so the card counters never overflow */ + ray_get_stats(dev); + break; + default: + DEBUG(0,"ray_cs unknown pkt type %2x\n", (unsigned int) readb(pmsg)); + break; + } + +} /* end ray_rx */ +/*===========================================================================*/ +static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned int pkt_addr, + int rx_len) +{ + struct sk_buff *skb = NULL; + struct rcs __iomem *prcslink = prcs; + ray_dev_t *local = dev->priv; + UCHAR *rx_ptr; + int total_len; + int tmp; +#ifdef WIRELESS_SPY + int siglev = local->last_rsl; + u_char linksrcaddr[ETH_ALEN]; /* Other end of the wireless link */ +#endif + + if (!sniffer) { + if (translate) { +/* TBD length needs fixing for translated header */ + if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) || + rx_len > (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN + FCS_LEN)) + { + DEBUG(0,"ray_cs invalid packet length %d received \n",rx_len); + return; + } + } + else /* encapsulated ethernet */ { + if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) || + rx_len > (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN + FCS_LEN)) + { + DEBUG(0,"ray_cs invalid packet length %d received \n",rx_len); + return; + } + } + } + DEBUG(4,"ray_cs rx_data packet\n"); + /* If fragmented packet, verify sizes of fragments add up */ + if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) { + DEBUG(1,"ray_cs rx'ed fragment\n"); + tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8) + + readb(&prcs->var.rx_packet.totalpacketlength[1]); + total_len = tmp; + prcslink = prcs; + do { + tmp -= (readb(&prcslink->var.rx_packet.rx_data_length[0]) << 8) + + readb(&prcslink->var.rx_packet.rx_data_length[1]); + if (readb(&prcslink->var.rx_packet.next_frag_rcs_index) == 0xFF + || tmp < 0) break; + prcslink = rcs_base(local) + + readb(&prcslink->link_field); + } while (1); + + if (tmp < 0) + { + DEBUG(0,"ray_cs rx_data fragment lengths don't add up\n"); + local->stats.rx_dropped++; + release_frag_chain(local, prcs); + return; + } + } + else { /* Single unfragmented packet */ + total_len = rx_len; + } + + skb = dev_alloc_skb( total_len+5 ); + if (skb == NULL) + { + DEBUG(0,"ray_cs rx_data could not allocate skb\n"); + local->stats.rx_dropped++; + if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) + release_frag_chain(local, prcs); + return; + } + skb_reserve( skb, 2); /* Align IP on 16 byte (TBD check this)*/ + skb->dev = dev; + + DEBUG(4,"ray_cs rx_data total_len = %x, rx_len = %x\n",total_len,rx_len); + +/************************/ + /* Reserve enough room for the whole damn packet. */ + rx_ptr = skb_put( skb, total_len); + /* Copy the whole packet to sk_buff */ + rx_ptr += copy_from_rx_buff(local, rx_ptr, pkt_addr & RX_BUFF_END, rx_len); + /* Get source address */ +#ifdef WIRELESS_SPY + memcpy(linksrcaddr, ((struct mac_header *)skb->data)->addr_2, ETH_ALEN); +#endif + /* Now, deal with encapsulation/translation/sniffer */ + if (!sniffer) { + if (!translate) { + /* Encapsulated ethernet, so just lop off 802.11 MAC header */ +/* TBD reserve skb_reserve( skb, RX_MAC_HEADER_LENGTH); */ + skb_pull( skb, RX_MAC_HEADER_LENGTH); + } + else { + /* Do translation */ + untranslate(local, skb, total_len); + } + } + else + { /* sniffer mode, so just pass whole packet */ }; + +/************************/ + /* Now pick up the rest of the fragments if any */ + tmp = 17; + if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) { + prcslink = prcs; + DEBUG(1,"ray_cs rx_data in fragment loop\n"); + do { + prcslink = rcs_base(local) + + readb(&prcslink->var.rx_packet.next_frag_rcs_index); + rx_len = (( readb(&prcslink->var.rx_packet.rx_data_length[0]) << 8) + + readb(&prcslink->var.rx_packet.rx_data_length[1])) + & RX_BUFF_END; + pkt_addr = (( readb(&prcslink->var.rx_packet.rx_data_ptr[0]) << 8) + + readb(&prcslink->var.rx_packet.rx_data_ptr[1])) + & RX_BUFF_END; + + rx_ptr += copy_from_rx_buff(local, rx_ptr, pkt_addr, rx_len); + + } while (tmp-- && + readb(&prcslink->var.rx_packet.next_frag_rcs_index) != 0xFF); + release_frag_chain(local, prcs); + } + + skb->protocol = eth_type_trans(skb,dev); + netif_rx(skb); + dev->last_rx = jiffies; + local->stats.rx_packets++; + local->stats.rx_bytes += total_len; + + /* Gather signal strength per address */ +#ifdef WIRELESS_SPY + /* For the Access Point or the node having started the ad-hoc net + * note : ad-hoc work only in some specific configurations, but we + * kludge in ray_get_wireless_stats... */ + if(!memcmp(linksrcaddr, local->bss_id, ETH_ALEN)) + { + /* Update statistics */ + /*local->wstats.qual.qual = none ? */ + local->wstats.qual.level = siglev; + /*local->wstats.qual.noise = none ? */ + local->wstats.qual.updated = 0x2; + } + /* Now, for the addresses in the spy list */ + { + int i; + /* Look all addresses */ + for(i = 0; i < local->spy_number; i++) + /* If match */ + if(!memcmp(linksrcaddr, local->spy_address[i], ETH_ALEN)) + { + /* Update statistics */ + /*local->spy_stat[i].qual = none ? */ + local->spy_stat[i].level = siglev; + /*local->spy_stat[i].noise = none ? */ + local->spy_stat[i].updated = 0x2; + } + } +#endif /* WIRELESS_SPY */ +} /* end rx_data */ +/*===========================================================================*/ +static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len) +{ + snaphdr_t *psnap = (snaphdr_t *)(skb->data + RX_MAC_HEADER_LENGTH); + struct mac_header *pmac = (struct mac_header *)skb->data; + unsigned short type = *(unsigned short *)psnap->ethertype; + unsigned int xsap = *(unsigned int *)psnap & 0x00ffffff; + unsigned int org = (*(unsigned int *)psnap->org) & 0x00ffffff; + int delta; + struct ethhdr *peth; + UCHAR srcaddr[ADDRLEN]; + UCHAR destaddr[ADDRLEN]; + + if (pmac->frame_ctl_2 & FC2_FROM_DS) { + if (pmac->frame_ctl_2 & FC2_TO_DS) { /* AP to AP */ + memcpy(destaddr, pmac->addr_3, ADDRLEN); + memcpy(srcaddr, ((unsigned char *)pmac->addr_3) + ADDRLEN, ADDRLEN); + } else { /* AP to terminal */ + memcpy(destaddr, pmac->addr_1, ADDRLEN); + memcpy(srcaddr, pmac->addr_3, ADDRLEN); + } + } else { /* Terminal to AP */ + if (pmac->frame_ctl_2 & FC2_TO_DS) { + memcpy(destaddr, pmac->addr_3, ADDRLEN); + memcpy(srcaddr, pmac->addr_2, ADDRLEN); + } else { /* Adhoc */ + memcpy(destaddr, pmac->addr_1, ADDRLEN); + memcpy(srcaddr, pmac->addr_2, ADDRLEN); + } + } + +#ifdef PCMCIA_DEBUG + if (pc_debug > 3) { + int i; + printk(KERN_DEBUG "skb->data before untranslate"); + for (i=0;i<64;i++) + printk("%02x ",skb->data[i]); + printk("\n" KERN_DEBUG "type = %08x, xsap = %08x, org = %08x\n", + type,xsap,org); + printk(KERN_DEBUG "untranslate skb->data = %p\n",skb->data); + } +#endif + + if ( xsap != SNAP_ID) { + /* not a snap type so leave it alone */ + DEBUG(3,"ray_cs untranslate NOT SNAP %x\n", *(unsigned int *)psnap & 0x00ffffff); + + delta = RX_MAC_HEADER_LENGTH - ETH_HLEN; + peth = (struct ethhdr *)(skb->data + delta); + peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH); + } + else { /* Its a SNAP */ + if (org == BRIDGE_ENCAP) { /* EtherII and nuke the LLC */ + DEBUG(3,"ray_cs untranslate Bridge encap\n"); + delta = RX_MAC_HEADER_LENGTH + + sizeof(struct snaphdr_t) - ETH_HLEN; + peth = (struct ethhdr *)(skb->data + delta); + peth->h_proto = type; + } + else { + if (org == RFC1042_ENCAP) { + switch (type) { + case RAY_IPX_TYPE: + case APPLEARP_TYPE: + DEBUG(3,"ray_cs untranslate RFC IPX/AARP\n"); + delta = RX_MAC_HEADER_LENGTH - ETH_HLEN; + peth = (struct ethhdr *)(skb->data + delta); + peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH); + break; + default: + DEBUG(3,"ray_cs untranslate RFC default\n"); + delta = RX_MAC_HEADER_LENGTH + + sizeof(struct snaphdr_t) - ETH_HLEN; + peth = (struct ethhdr *)(skb->data + delta); + peth->h_proto = type; + break; + } + } + else { + printk("ray_cs untranslate very confused by packet\n"); + delta = RX_MAC_HEADER_LENGTH - ETH_HLEN; + peth = (struct ethhdr *)(skb->data + delta); + peth->h_proto = type; + } + } + } +/* TBD reserve skb_reserve(skb, delta); */ + skb_pull(skb, delta); + DEBUG(3,"untranslate after skb_pull(%d), skb->data = %p\n",delta,skb->data); + memcpy(peth->h_dest, destaddr, ADDRLEN); + memcpy(peth->h_source, srcaddr, ADDRLEN); +#ifdef PCMCIA_DEBUG + if (pc_debug > 3) { + int i; + printk(KERN_DEBUG "skb->data after untranslate:"); + for (i=0;i<64;i++) + printk("%02x ",skb->data[i]); + printk("\n"); + } +#endif +} /* end untranslate */ +/*===========================================================================*/ +/* Copy data from circular receive buffer to PC memory. + * dest = destination address in PC memory + * pkt_addr = source address in receive buffer + * len = length of packet to copy + */ +static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int length) +{ + int wrap_bytes = (pkt_addr + length) - (RX_BUFF_END + 1); + if (wrap_bytes <= 0) + { + memcpy_fromio(dest,local->rmem + pkt_addr,length); + } + else /* Packet wrapped in circular buffer */ + { + memcpy_fromio(dest,local->rmem+pkt_addr,length - wrap_bytes); + memcpy_fromio(dest + length - wrap_bytes, local->rmem, wrap_bytes); + } + return length; +} +/*===========================================================================*/ +static void release_frag_chain(ray_dev_t *local, struct rcs __iomem * prcs) +{ + struct rcs __iomem *prcslink = prcs; + int tmp = 17; + unsigned rcsindex = readb(&prcs->var.rx_packet.next_frag_rcs_index); + + while (tmp--) { + writeb(CCS_BUFFER_FREE, &prcslink->buffer_status); + if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) { + DEBUG(1,"ray_cs interrupt bad rcsindex = 0x%x\n",rcsindex); + break; + } + prcslink = rcs_base(local) + rcsindex; + rcsindex = readb(&prcslink->var.rx_packet.next_frag_rcs_index); + } + writeb(CCS_BUFFER_FREE, &prcslink->buffer_status); +} +/*===========================================================================*/ +static void authenticate(ray_dev_t *local) +{ + dev_link_t *link = local->finder; + DEBUG(0,"ray_cs Starting authentication.\n"); + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs authenticate - device not present\n"); + return; + } + + del_timer(&local->timer); + if (build_auth_frame(local, local->bss_id, OPEN_AUTH_REQUEST)) { + local->timer.function = &join_net; + } + else { + local->timer.function = &authenticate_timeout; + } + local->timer.expires = jiffies + HZ*2; + local->timer.data = (long)local; + add_timer(&local->timer); + local->authentication_state = AWAITING_RESPONSE; +} /* end authenticate */ +/*===========================================================================*/ +static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs, + unsigned int pkt_addr, int rx_len) +{ + UCHAR buff[256]; + struct rx_msg *msg = (struct rx_msg *)buff; + + del_timer(&local->timer); + + copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff); + /* if we are trying to get authenticated */ + if (local->sparm.b4.a_network_type == ADHOC) { + DEBUG(1,"ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n", msg->var[0],msg->var[1],msg->var[2],msg->var[3],msg->var[4],msg->var[5]); + if (msg->var[2] == 1) { + DEBUG(0,"ray_cs Sending authentication response.\n"); + if (!build_auth_frame (local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) { + local->authentication_state = NEED_TO_AUTH; + memcpy(local->auth_id, msg->mac.addr_2, ADDRLEN); + } + } + } + else /* Infrastructure network */ + { + if (local->authentication_state == AWAITING_RESPONSE) { + /* Verify authentication sequence #2 and success */ + if (msg->var[2] == 2) { + if ((msg->var[3] | msg->var[4]) == 0) { + DEBUG(1,"Authentication successful\n"); + local->card_status = CARD_AUTH_COMPLETE; + associate(local); + local->authentication_state = AUTHENTICATED; + } + else { + DEBUG(0,"Authentication refused\n"); + local->card_status = CARD_AUTH_REFUSED; + join_net((u_long)local); + local->authentication_state = UNAUTHENTICATED; + } + } + } + } + +} /* end rx_authenticate */ +/*===========================================================================*/ +static void associate(ray_dev_t *local) +{ + struct ccs __iomem *pccs; + dev_link_t *link = local->finder; + struct net_device *dev = link->priv; + int ccsindex; + if (!(link->state & DEV_PRESENT)) { + DEBUG(2,"ray_cs associate - device not present\n"); + return; + } + /* If no tx buffers available, return*/ + if ((ccsindex = get_free_ccs(local)) < 0) + { +/* TBD should never be here but... what if we are? */ + DEBUG(1,"ray_cs associate - No free ccs\n"); + return; + } + DEBUG(1,"ray_cs Starting association with access point\n"); + pccs = ccs_base(local) + ccsindex; + /* fill in the CCS */ + writeb(CCS_START_ASSOCIATION, &pccs->cmd); + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + DEBUG(1,"ray_cs associate failed - ECF not ready for intr\n"); + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + + del_timer(&local->timer); + local->timer.expires = jiffies + HZ*2; + local->timer.data = (long)local; + local->timer.function = &join_net; + add_timer(&local->timer); + local->card_status = CARD_ASSOC_FAILED; + return; + } + if (!sniffer) netif_start_queue(dev); + +} /* end associate */ +/*===========================================================================*/ +static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs, + unsigned int pkt_addr, int rx_len) +{ +/* UCHAR buff[256]; + struct rx_msg *msg = (struct rx_msg *)buff; +*/ + DEBUG(0,"Deauthentication frame received\n"); + local->authentication_state = UNAUTHENTICATED; + /* Need to reauthenticate or rejoin depending on reason code */ +/* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff); + */ +} +/*===========================================================================*/ +static void clear_interrupt(ray_dev_t *local) +{ + writeb(0, local->amem + CIS_OFFSET + HCS_INTR_OFFSET); +} +/*===========================================================================*/ +#ifdef CONFIG_PROC_FS +#define MAXDATA (PAGE_SIZE - 80) + +static char *card_status[] = { + "Card inserted - uninitialized", /* 0 */ + "Card not downloaded", /* 1 */ + "Waiting for download parameters", /* 2 */ + "Card doing acquisition", /* 3 */ + "Acquisition complete", /* 4 */ + "Authentication complete", /* 5 */ + "Association complete", /* 6 */ + "???", "???", "???", "???", /* 7 8 9 10 undefined */ + "Card init error", /* 11 */ + "Download parameters error", /* 12 */ + "???", /* 13 */ + "Acquisition failed", /* 14 */ + "Authentication refused", /* 15 */ + "Association failed" /* 16 */ +}; + +static char *nettype[] = {"Adhoc", "Infra "}; +static char *framing[] = {"Encapsulation", "Translation"} +; +/*===========================================================================*/ +static int ray_cs_proc_read(char *buf, char **start, off_t offset, int len) +{ +/* Print current values which are not available via other means + * eg ifconfig + */ + int i; + dev_link_t *link; + struct net_device *dev; + ray_dev_t *local; + UCHAR *p; + struct freq_hop_element *pfh; + UCHAR c[33]; + + link = dev_list; + if (!link) + return 0; + dev = (struct net_device *)link->priv; + if (!dev) + return 0; + local = (ray_dev_t *)dev->priv; + if (!local) + return 0; + + len = 0; + + len += sprintf(buf + len, "Raylink Wireless LAN driver status\n"); + len += sprintf(buf + len, "%s\n", rcsid); + /* build 4 does not report version, and field is 0x55 after memtest */ + len += sprintf(buf + len, "Firmware version = "); + if (local->fw_ver == 0x55) + len += sprintf(buf + len, "4 - Use dump_cis for more details\n"); + else + len += sprintf(buf + len, "%2d.%02d.%02d\n", + local->fw_ver, local->fw_bld, local->fw_var); + + for (i=0; i<32; i++) c[i] = local->sparm.b5.a_current_ess_id[i]; + c[32] = 0; + len += sprintf(buf + len, "%s network ESSID = \"%s\"\n", + nettype[local->sparm.b5.a_network_type], c); + + p = local->bss_id; + len += sprintf(buf + len, + "BSSID = %02x:%02x:%02x:%02x:%02x:%02x\n", + p[0],p[1],p[2],p[3],p[4],p[5]); + + len += sprintf(buf + len, "Country code = %d\n", + local->sparm.b5.a_curr_country_code); + + i = local->card_status; + if (i < 0) i = 10; + if (i > 16) i = 10; + len += sprintf(buf + len, "Card status = %s\n", card_status[i]); + + len += sprintf(buf + len, "Framing mode = %s\n",framing[translate]); + + len += sprintf(buf + len, "Last pkt signal lvl = %d\n", local->last_rsl); + + if (local->beacon_rxed) { + /* Pull some fields out of last beacon received */ + len += sprintf(buf + len, "Beacon Interval = %d Kus\n", + local->last_bcn.beacon_intvl[0] + + 256 * local->last_bcn.beacon_intvl[1]); + + p = local->last_bcn.elements; + if (p[0] == C_ESSID_ELEMENT_ID) p += p[1] + 2; + else { + len += sprintf(buf + len, "Parse beacon failed at essid element id = %d\n",p[0]); + return len; + } + + if (p[0] == C_SUPPORTED_RATES_ELEMENT_ID) { + len += sprintf(buf + len, "Supported rate codes = "); + for (i=2; i<p[1] + 2; i++) + len += sprintf(buf + len, "0x%02x ", p[i]); + len += sprintf(buf + len, "\n"); + p += p[1] + 2; + } + else { + len += sprintf(buf + len, "Parse beacon failed at rates element\n"); + return len; + } + + if (p[0] == C_FH_PARAM_SET_ELEMENT_ID) { + pfh = (struct freq_hop_element *)p; + len += sprintf(buf + len, "Hop dwell = %d Kus\n", + pfh->dwell_time[0] + 256 * pfh->dwell_time[1]); + len += sprintf(buf + len, "Hop set = %d \n", pfh->hop_set); + len += sprintf(buf + len, "Hop pattern = %d \n", pfh->hop_pattern); + len += sprintf(buf + len, "Hop index = %d \n", pfh->hop_index); + p += p[1] + 2; + } + else { + len += sprintf(buf + len, "Parse beacon failed at FH param element\n"); + return len; + } + } else { + len += sprintf(buf + len, "No beacons received\n"); + } + return len; +} + +#endif +/*===========================================================================*/ +static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type) +{ + int addr; + struct ccs __iomem *pccs; + struct tx_msg __iomem *ptx; + int ccsindex; + + /* If no tx buffers available, return */ + if ((ccsindex = get_free_tx_ccs(local)) < 0) + { + DEBUG(1,"ray_cs send authenticate - No free tx ccs\n"); + return -1; + } + + pccs = ccs_base(local) + ccsindex; + + /* Address in card space */ + addr = TX_BUF_BASE + (ccsindex << 11); + /* fill in the CCS */ + writeb(CCS_TX_REQUEST, &pccs->cmd); + writeb(addr >> 8, pccs->var.tx_request.tx_data_ptr); + writeb(0x20, pccs->var.tx_request.tx_data_ptr + 1); + writeb(TX_AUTHENTICATE_LENGTH_MSB, pccs->var.tx_request.tx_data_length); + writeb(TX_AUTHENTICATE_LENGTH_LSB,pccs->var.tx_request.tx_data_length + 1); + writeb(0, &pccs->var.tx_request.pow_sav_mode); + + ptx = local->sram + addr; + /* fill in the mac header */ + writeb(PROTOCOL_VER | AUTHENTIC_TYPE, &ptx->mac.frame_ctl_1); + writeb(0, &ptx->mac.frame_ctl_2); + + memcpy_toio(ptx->mac.addr_1, dest, ADDRLEN); + memcpy_toio(ptx->mac.addr_2, local->sparm.b4.a_mac_addr, ADDRLEN); + memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN); + + /* Fill in msg body with protocol 00 00, sequence 01 00 ,status 00 00 */ + memset_io(ptx->var, 0, 6); + writeb(auth_type & 0xff, ptx->var + 2); + + /* Interrupt the firmware to process the command */ + if (interrupt_ecf(local, ccsindex)) { + DEBUG(1,"ray_cs send authentication request failed - ECF not ready for intr\n"); + writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status); + return -1; + } + return 0; +} /* End build_auth_frame */ + +/*===========================================================================*/ +#ifdef CONFIG_PROC_FS +static void raycs_write(const char *name, write_proc_t *w, void *data) +{ + struct proc_dir_entry * entry = create_proc_entry(name, S_IFREG | S_IWUSR, NULL); + if (entry) { + entry->write_proc = w; + entry->data = data; + } +} + +static int write_essid(struct file *file, const char __user *buffer, unsigned long count, void *data) +{ + static char proc_essid[33]; + int len = count; + + if (len > 32) + len = 32; + memset(proc_essid, 0, 33); + if (copy_from_user(proc_essid, buffer, len)) + return -EFAULT; + essid = proc_essid; + return count; +} + +static int write_int(struct file *file, const char __user *buffer, unsigned long count, void *data) +{ + static char proc_number[10]; + char *p; + int nr, len; + + if (!count) + return 0; + + if (count > 9) + return -EINVAL; + if (copy_from_user(proc_number, buffer, count)) + return -EFAULT; + p = proc_number; + nr = 0; + len = count; + do { + unsigned int c = *p - '0'; + if (c > 9) + return -EINVAL; + nr = nr*10 + c; + p++; + } while (--len); + *(int *)data = nr; + return count; +} +#endif + +static struct pcmcia_driver ray_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "ray_cs", + }, + .attach = ray_attach, + .detach = ray_detach, +}; + +static int __init init_ray_cs(void) +{ + int rc; + + DEBUG(1, "%s\n", rcsid); + rc = pcmcia_register_driver(&ray_driver); + DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",rc); + +#ifdef CONFIG_PROC_FS + proc_mkdir("driver/ray_cs", NULL); + + create_proc_info_entry("driver/ray_cs/ray_cs", 0, NULL, &ray_cs_proc_read); + raycs_write("driver/ray_cs/essid", write_essid, NULL); + raycs_write("driver/ray_cs/net_type", write_int, &net_type); + raycs_write("driver/ray_cs/translate", write_int, &translate); +#endif + if (translate != 0) translate = 1; + return 0; +} /* init_ray_cs */ + +/*===========================================================================*/ + +static void __exit exit_ray_cs(void) +{ + DEBUG(0, "ray_cs: cleanup_module\n"); + +#ifdef CONFIG_PROC_FS + remove_proc_entry("driver/ray_cs/ray_cs", NULL); + remove_proc_entry("driver/ray_cs/essid", NULL); + remove_proc_entry("driver/ray_cs/net_type", NULL); + remove_proc_entry("driver/ray_cs/translate", NULL); + remove_proc_entry("driver/ray_cs", NULL); +#endif + + pcmcia_unregister_driver(&ray_driver); + BUG_ON(dev_list != NULL); +} /* exit_ray_cs */ + +module_init(init_ray_cs); +module_exit(exit_ray_cs); + +/*===========================================================================*/ diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h new file mode 100644 index 00000000000..c77afa14fa8 --- /dev/null +++ b/drivers/net/wireless/ray_cs.h @@ -0,0 +1,78 @@ +/* Raytheon wireless LAN PCMCIA card driver for Linux + A PCMCIA client driver for the Raylink wireless network card + Written by Corey Thomas +*/ + +#ifndef RAYLINK_H + +struct beacon_rx { + struct mac_header mac; + UCHAR timestamp[8]; + UCHAR beacon_intvl[2]; + UCHAR capability[2]; + UCHAR elements[sizeof(struct essid_element) + + sizeof(struct rates_element) + + sizeof(struct freq_hop_element) + + sizeof(struct japan_call_sign_element) + + sizeof(struct tim_element)]; +}; + +/* Return values for get_free{,_tx}_ccs */ +#define ECCSFULL (-1) +#define ECCSBUSY (-2) +#define ECARDGONE (-3) + +typedef struct ray_dev_t { + int card_status; + int authentication_state; + dev_node_t node; + window_handle_t amem_handle; /* handle to window for attribute memory */ + window_handle_t rmem_handle; /* handle to window for rx buffer on card */ + void __iomem *sram; /* pointer to beginning of shared RAM */ + void __iomem *amem; /* pointer to attribute mem window */ + void __iomem *rmem; /* pointer to receive buffer window */ + dev_link_t *finder; /* pointer back to dev_link_t for card */ + struct timer_list timer; + long tx_ccs_lock; + long ccs_lock; + int dl_param_ccs; + union { + struct b4_startup_params b4; + struct b5_startup_params b5; + } sparm; + int timeout_flag; + UCHAR supported_rates[8]; + UCHAR japan_call_sign[12]; + struct startup_res_6 startup_res; + int num_multi; + /* Network parameters from start/join */ + UCHAR bss_id[6]; + UCHAR auth_id[6]; + UCHAR net_default_tx_rate; + UCHAR encryption; + struct net_device_stats stats; + + UCHAR net_type; + UCHAR sta_type; + UCHAR fw_ver; + UCHAR fw_bld; + UCHAR fw_var; + UCHAR ASIC_version; + UCHAR assoc_id[2]; + UCHAR tib_length; + UCHAR last_rsl; + int beacon_rxed; + struct beacon_rx last_bcn; +#ifdef WIRELESS_EXT + iw_stats wstats; /* Wireless specific stats */ +#endif +#ifdef WIRELESS_SPY + int spy_number; /* Number of addresses to spy */ + mac_addr spy_address[IW_MAX_SPY + 1]; /* The addresses to spy */ + iw_qual spy_stat[IW_MAX_SPY + 1]; /* Statistics gathered */ +#endif /* WIRELESS_SPY */ + +} ray_dev_t; +/*****************************************************************************/ + +#endif /* RAYLINK_H */ diff --git a/drivers/net/wireless/rayctl.h b/drivers/net/wireless/rayctl.h new file mode 100644 index 00000000000..49d9b267bc0 --- /dev/null +++ b/drivers/net/wireless/rayctl.h @@ -0,0 +1,732 @@ +#ifndef RAYLINK_H + +typedef unsigned char UCHAR; + +/****** IEEE 802.11 constants ************************************************/ +#define ADDRLEN 6 +/* Frame control 1 bit fields */ +#define PROTOCOL_VER 0x00 +#define DATA_TYPE 0x08 +#define ASSOC_REQ_TYPE 0x00 +#define ASSOC_RESP_TYPE 0x10 +#define REASSOC_REQ_TYPE 0x20 +#define REASSOC_RESP_TYPE 0x30 +#define NULL_MSG_TYPE 0x48 +#define BEACON_TYPE 0x80 +#define DISASSOC_TYPE 0xA0 +#define PSPOLL_TYPE 0xA4 +#define AUTHENTIC_TYPE 0xB0 +#define DEAUTHENTIC_TYPE 0xC0 +/* Frame control 2 bit fields */ +#define FC2_TO_DS 0x01 +#define FC2_FROM_DS 0x02 +#define FC2_MORE_FRAG 0x04 +#define FC2_RETRY 0x08 +#define FC2_PSM 0x10 +#define FC2_MORE_DATA 0x20 +#define FC2_WEP 0x40 +#define FC2_ORDER 0x80 +/*****************************************************************************/ +/* 802.11 element ID's and lengths */ +#define C_BP_CAPABILITY_ESS 0x01 +#define C_BP_CAPABILITY_IBSS 0x02 +#define C_BP_CAPABILITY_CF_POLLABLE 0x04 +#define C_BP_CAPABILITY_CF_POLL_REQUEST 0x08 +#define C_BP_CAPABILITY_PRIVACY 0x10 + +#define C_ESSID_ELEMENT_ID 0 +#define C_ESSID_ELEMENT_MAX_LENGTH 32 + +#define C_SUPPORTED_RATES_ELEMENT_ID 1 +#define C_SUPPORTED_RATES_ELEMENT_LENGTH 2 + +#define C_FH_PARAM_SET_ELEMENT_ID 2 +#define C_FH_PARAM_SET_ELEMENT_LNGTH 5 + +#define C_CF_PARAM_SET_ELEMENT_ID 4 +#define C_CF_PARAM_SET_ELEMENT_LNGTH 6 + +#define C_TIM_ELEMENT_ID 5 +#define C_TIM_BITMAP_LENGTH 251 +#define C_TIM_BMCAST_BIT 0x01 + +#define C_IBSS_ELEMENT_ID 6 +#define C_IBSS_ELEMENT_LENGTH 2 + +#define C_JAPAN_CALL_SIGN_ELEMENT_ID 51 +#define C_JAPAN_CALL_SIGN_ELEMENT_LNGTH 12 + +#define C_DISASSOC_REASON_CODE_LEN 2 +#define C_DISASSOC_REASON_CODE_DEFAULT 8 + +#define C_CRC_LEN 4 +#define C_NUM_SUPPORTED_RATES 8 +/****** IEEE 802.11 mac header for type data packets *************************/ +struct mac_header { + UCHAR frame_ctl_1; + UCHAR frame_ctl_2; + UCHAR duration_lsb; + UCHAR duration_msb; + UCHAR addr_1[ADDRLEN]; + UCHAR addr_2[ADDRLEN]; + UCHAR addr_3[ADDRLEN]; + UCHAR seq_frag_num[2]; +/* UCHAR addr_4[ADDRLEN]; *//* only present for AP to AP (TO DS and FROM DS */ +}; +/****** IEEE 802.11 frame element structures *********************************/ +struct essid_element +{ + UCHAR id; + UCHAR length; + UCHAR text[C_ESSID_ELEMENT_MAX_LENGTH]; +}; +struct rates_element +{ + UCHAR id; + UCHAR length; + UCHAR value[8]; +}; +struct freq_hop_element +{ + UCHAR id; + UCHAR length; + UCHAR dwell_time[2]; + UCHAR hop_set; + UCHAR hop_pattern; + UCHAR hop_index; +}; +struct tim_element +{ + UCHAR id; + UCHAR length; + UCHAR dtim_count; + UCHAR dtim_period; + UCHAR bitmap_control; + UCHAR tim[C_TIM_BITMAP_LENGTH]; +}; +struct ibss_element +{ + UCHAR id; + UCHAR length; + UCHAR atim_window[2]; +}; +struct japan_call_sign_element +{ + UCHAR id; + UCHAR length; + UCHAR call_sign[12]; +}; +/****** Beacon message structures ********************************************/ +/* .elements is a large lump of max size because elements are variable size */ +struct infra_beacon +{ + UCHAR timestamp[8]; + UCHAR beacon_intvl[2]; + UCHAR capability[2]; + UCHAR elements[sizeof(struct essid_element) + + sizeof(struct rates_element) + + sizeof(struct freq_hop_element) + + sizeof(struct japan_call_sign_element) + + sizeof(struct tim_element)]; +}; +struct adhoc_beacon +{ + UCHAR timestamp[8]; + UCHAR beacon_intvl[2]; + UCHAR capability[2]; + UCHAR elements[sizeof(struct essid_element) + + sizeof(struct rates_element) + + sizeof(struct freq_hop_element) + + sizeof(struct japan_call_sign_element) + + sizeof(struct ibss_element)]; +}; +/*****************************************************************************/ +/*****************************************************************************/ +/* #define C_MAC_HDR_2_WEP 0x40 */ +/* TX/RX CCS constants */ +#define TX_HEADER_LENGTH 0x1C +#define RX_MAC_HEADER_LENGTH 0x18 +#define TX_AUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 6) +#define TX_AUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8) +#define TX_AUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff) +#define TX_DEAUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 2) +#define TX_DEAUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8) +#define TX_DEAUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff) +#define FCS_LEN 4 + +#define ADHOC 0 +#define INFRA 1 + +#define TYPE_STA 0 +#define TYPE_AP 1 + +#define PASSIVE_SCAN 1 +#define ACTIVE_SCAN 1 + +#define PSM_CAM 0 + +/* Country codes */ +#define USA 1 +#define EUROPE 2 +#define JAPAN 3 +#define KOREA 4 +#define SPAIN 5 +#define FRANCE 6 +#define ISRAEL 7 +#define AUSTRALIA 8 +#define JAPAN_TEST 9 + +/* Hop pattern lengths */ +#define USA_HOP_MOD 79 +#define EUROPE_HOP_MOD 79 +#define JAPAN_HOP_MOD 23 +#define KOREA_HOP_MOD 23 +#define SPAIN_HOP_MOD 27 +#define FRANCE_HOP_MOD 35 +#define ISRAEL_HOP_MOD 35 +#define AUSTRALIA_HOP_MOD 47 +#define JAPAN_TEST_HOP_MOD 23 + +#define ESSID_SIZE 32 +/**********************************************************************/ +/* CIS Register Constants */ +#define CIS_OFFSET 0x0f00 +/* Configuration Option Register (0x0F00) */ +#define COR_OFFSET 0x00 +#define COR_SOFT_RESET 0x80 +#define COR_LEVEL_IRQ 0x40 +#define COR_CONFIG_NUM 0x01 +#define COR_DEFAULT (COR_LEVEL_IRQ | COR_CONFIG_NUM) + +/* Card Configuration and Status Register (0x0F01) */ +#define CCSR_OFFSET 0x01 +#define CCSR_HOST_INTR_PENDING 0x01 +#define CCSR_POWER_DOWN 0x04 + +/* HCS Interrupt Register (0x0F05) */ +#define HCS_INTR_OFFSET 0x05 +/* #define HCS_INTR_OFFSET 0x0A */ +#define HCS_INTR_CLEAR 0x00 + +/* ECF Interrupt Register (0x0F06) */ +#define ECF_INTR_OFFSET 0x06 +/* #define ECF_INTR_OFFSET 0x0C */ +#define ECF_INTR_SET 0x01 + +/* Authorization Register 0 (0x0F08) */ +#define AUTH_0_ON 0x57 + +/* Authorization Register 1 (0x0F09) */ +#define AUTH_1_ON 0x82 + +/* Program Mode Register (0x0F0A) */ +#define PC2PM 0x02 +#define PC2CAL 0x10 +#define PC2MLSE 0x20 + +/* PC Test Mode Register (0x0F0B) */ +#define PC_TEST_MODE 0x08 + +/* Frequency Control Word (0x0F10) */ +/* Range 0x02 - 0xA6 */ + +/* Test Mode Control 1-4 (0x0F14 - 0x0F17) */ + +/**********************************************************************/ + +/* Shared RAM Area */ +#define SCB_BASE 0x0000 +#define STATUS_BASE 0x0100 +#define HOST_TO_ECF_BASE 0x0200 +#define ECF_TO_HOST_BASE 0x0300 +#define CCS_BASE 0x0400 +#define RCS_BASE 0x0800 +#define INFRA_TIM_BASE 0x0C00 +#define SSID_LIST_BASE 0x0D00 +#define TX_BUF_BASE 0x1000 +#define RX_BUF_BASE 0x8000 + +#define NUMBER_OF_CCS 64 +#define NUMBER_OF_RCS 64 +/*#define NUMBER_OF_TX_CCS 14 */ +#define NUMBER_OF_TX_CCS 14 + +#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg)) +#define RX_BUFF_END 0x3FFF +/* Values for buffer_status */ +#define CCS_BUFFER_FREE 0 +#define CCS_BUFFER_BUSY 1 +#define CCS_COMMAND_COMPLETE 2 +#define CCS_COMMAND_FAILED 3 + +/* Values for cmd */ +#define CCS_DOWNLOAD_STARTUP_PARAMS 1 +#define CCS_UPDATE_PARAMS 2 +#define CCS_REPORT_PARAMS 3 +#define CCS_UPDATE_MULTICAST_LIST 4 +#define CCS_UPDATE_POWER_SAVINGS_MODE 5 +#define CCS_START_NETWORK 6 +#define CCS_JOIN_NETWORK 7 +#define CCS_START_ASSOCIATION 8 +#define CCS_TX_REQUEST 9 +#define CCS_TEST_MEMORY 0xa +#define CCS_SHUTDOWN 0xb +#define CCS_DUMP_MEMORY 0xc +#define CCS_START_TIMER 0xe +#define CCS_LAST_CMD CCS_START_TIMER + +/* Values for link field */ +#define CCS_END_LIST 0xff + +/* values for buffer_status field */ +#define RCS_BUFFER_FREE 0 +#define RCS_BUFFER_BUSY 1 +#define RCS_COMPLETE 2 +#define RCS_FAILED 3 +#define RCS_BUFFER_RELEASE 0xFF + +/* values for interrupt_id field */ +#define PROCESS_RX_PACKET 0x80 /* */ +#define REJOIN_NET_COMPLETE 0x81 /* RCS ID: Rejoin Net Complete */ +#define ROAMING_INITIATED 0x82 /* RCS ID: Roaming Initiated */ +#define JAPAN_CALL_SIGN_RXD 0x83 /* RCS ID: New Japan Call Sign */ + +/*****************************************************************************/ +/* Memory types for dump memory command */ +#define C_MEM_PROG 0 +#define C_MEM_XDATA 1 +#define C_MEM_SFR 2 +#define C_MEM_IDATA 3 + +/*** Return values for hw_xmit **********/ +#define XMIT_OK (0) +#define XMIT_MSG_BAD (-1) +#define XMIT_NO_CCS (-2) +#define XMIT_NO_INTR (-3) +#define XMIT_NEED_AUTH (-4) + +/*** Values for card status */ +#define CARD_INSERTED (0) + +#define CARD_AWAITING_PARAM (1) +#define CARD_INIT_ERROR (11) + +#define CARD_DL_PARAM (2) +#define CARD_DL_PARAM_ERROR (12) + +#define CARD_DOING_ACQ (3) + +#define CARD_ACQ_COMPLETE (4) +#define CARD_ACQ_FAILED (14) + +#define CARD_AUTH_COMPLETE (5) +#define CARD_AUTH_REFUSED (15) + +#define CARD_ASSOC_COMPLETE (6) +#define CARD_ASSOC_FAILED (16) + +/*** Values for authentication_state ***********************************/ +#define UNAUTHENTICATED (0) +#define AWAITING_RESPONSE (1) +#define AUTHENTICATED (2) +#define NEED_TO_AUTH (3) + +/*** Values for authentication type ************************************/ +#define OPEN_AUTH_REQUEST (1) +#define OPEN_AUTH_RESPONSE (2) +#define BROADCAST_DEAUTH (0xc0) +/*** Values for timer functions ****************************************/ +#define TODO_NOTHING (0) +#define TODO_VERIFY_DL_START (-1) +#define TODO_START_NET (-2) +#define TODO_JOIN_NET (-3) +#define TODO_AUTHENTICATE_TIMEOUT (-4) +#define TODO_SEND_CCS (-5) +/***********************************************************************/ +/* Parameter passing structure for update/report parameter CCS's */ +struct object_id { + void *object_addr; + unsigned char object_length; +}; + +#define OBJID_network_type 0 +#define OBJID_acting_as_ap_status 1 +#define OBJID_current_ess_id 2 +#define OBJID_scanning_mode 3 +#define OBJID_power_mgt_state 4 +#define OBJID_mac_address 5 +#define OBJID_frag_threshold 6 +#define OBJID_hop_time 7 +#define OBJID_beacon_period 8 +#define OBJID_dtim_period 9 +#define OBJID_retry_max 10 +#define OBJID_ack_timeout 11 +#define OBJID_sifs 12 +#define OBJID_difs 13 +#define OBJID_pifs 14 +#define OBJID_rts_threshold 15 +#define OBJID_scan_dwell_time 16 +#define OBJID_max_scan_dwell_time 17 +#define OBJID_assoc_resp_timeout 18 +#define OBJID_adhoc_scan_cycle_max 19 +#define OBJID_infra_scan_cycle_max 20 +#define OBJID_infra_super_cycle_max 21 +#define OBJID_promiscuous_mode 22 +#define OBJID_unique_word 23 +#define OBJID_slot_time 24 +#define OBJID_roaming_low_snr 25 +#define OBJID_low_snr_count_thresh 26 +#define OBJID_infra_missed_bcn 27 +#define OBJID_adhoc_missed_bcn 28 +#define OBJID_curr_country_code 29 +#define OBJID_hop_pattern 30 +#define OBJID_reserved 31 +#define OBJID_cw_max_msb 32 +#define OBJID_cw_min_msb 33 +#define OBJID_noise_filter_gain 34 +#define OBJID_noise_limit_offset 35 +#define OBJID_det_rssi_thresh_offset 36 +#define OBJID_med_busy_thresh_offset 37 +#define OBJID_det_sync_thresh 38 +#define OBJID_test_mode 39 +#define OBJID_test_min_chan_num 40 +#define OBJID_test_max_chan_num 41 +#define OBJID_allow_bcast_ID_prbrsp 42 +#define OBJID_privacy_must_start 43 +#define OBJID_privacy_can_join 44 +#define OBJID_basic_rate_set 45 + +/**** Configuration/Status/Control Area ***************************/ +/* System Control Block (SCB) Area + * Located at Shared RAM offset 0 + */ +struct scb { + UCHAR ccs_index; + UCHAR rcs_index; +}; + +/****** Status area at Shared RAM offset 0x0100 ******************************/ +struct status { + UCHAR mrx_overflow_for_host; /* 0=ECF may write, 1=host may write*/ + UCHAR mrx_checksum_error_for_host; /* 0=ECF may write, 1=host may write*/ + UCHAR rx_hec_error_for_host; /* 0=ECF may write, 1=host may write*/ + UCHAR reserved1; + short mrx_overflow; /* ECF increments on rx overflow */ + short mrx_checksum_error; /* ECF increments on rx CRC error */ + short rx_hec_error; /* ECF incs on mac header CRC error */ + UCHAR rxnoise; /* Average RSL measurement */ +}; + +/****** Host-to-ECF Data Area at Shared RAM offset 0x200 *********************/ +struct host_to_ecf_area { + +}; + +/****** ECF-to-Host Data Area at Shared RAM offset 0x0300 ********************/ +struct startup_res_518 { + UCHAR startup_word; + UCHAR station_addr[ADDRLEN]; + UCHAR calc_prog_chksum; + UCHAR calc_cis_chksum; + UCHAR ecf_spare[7]; + UCHAR japan_call_sign[12]; +}; + +struct startup_res_6 { + UCHAR startup_word; + UCHAR station_addr[ADDRLEN]; + UCHAR reserved; + UCHAR supp_rates[8]; + UCHAR japan_call_sign[12]; + UCHAR calc_prog_chksum; + UCHAR calc_cis_chksum; + UCHAR firmware_version[3]; + UCHAR asic_version; + UCHAR tib_length; +}; + +struct start_join_net_params { + UCHAR net_type; + UCHAR ssid[ESSID_SIZE]; + UCHAR reserved; + UCHAR privacy_can_join; +}; + +/****** Command Control Structure area at Shared ram offset 0x0400 ***********/ +/* Structures for command specific parameters (ccs.var) */ +struct update_param_cmd { + UCHAR object_id; + UCHAR number_objects; + UCHAR failure_cause; +}; +struct report_param_cmd { + UCHAR object_id; + UCHAR number_objects; + UCHAR failure_cause; + UCHAR length; +}; +struct start_network_cmd { + UCHAR update_param; + UCHAR bssid[ADDRLEN]; + UCHAR net_initiated; + UCHAR net_default_tx_rate; + UCHAR encryption; +}; +struct join_network_cmd { + UCHAR update_param; + UCHAR bssid[ADDRLEN]; + UCHAR net_initiated; + UCHAR net_default_tx_rate; + UCHAR encryption; +}; +struct tx_requested_cmd { + + UCHAR tx_data_ptr[2]; + UCHAR tx_data_length[2]; + UCHAR host_reserved[2]; + UCHAR reserved[3]; + UCHAR tx_rate; + UCHAR pow_sav_mode; + UCHAR retries; + UCHAR antenna; +}; +struct tx_requested_cmd_4 { + + UCHAR tx_data_ptr[2]; + UCHAR tx_data_length[2]; + UCHAR dest_addr[ADDRLEN]; + UCHAR pow_sav_mode; + UCHAR retries; + UCHAR station_id; +}; +struct memory_dump_cmd { + UCHAR memory_type; + UCHAR memory_ptr[2]; + UCHAR length; +}; +struct update_association_cmd { + UCHAR status; + UCHAR aid[2]; +}; +struct start_timer_cmd { + UCHAR duration[2]; +}; + +struct ccs { + UCHAR buffer_status; /* 0 = buffer free, 1 = buffer busy */ + /* 2 = command complete, 3 = failed */ + UCHAR cmd; /* command to ECF */ + UCHAR link; /* link to next CCS, FF=end of list */ + /* command specific parameters */ + union { + char reserved[13]; + struct update_param_cmd update_param; + struct report_param_cmd report_param; + UCHAR nummulticast; + UCHAR mode; + struct start_network_cmd start_network; + struct join_network_cmd join_network; + struct tx_requested_cmd tx_request; + struct memory_dump_cmd memory_dump; + struct update_association_cmd update_assoc; + struct start_timer_cmd start_timer; + } var; +}; + +/*****************************************************************************/ +/* Transmit buffer structures */ +struct tib_structure { + UCHAR ccs_index; + UCHAR psm; + UCHAR pass_fail; + UCHAR retry_count; + UCHAR max_retries; + UCHAR frags_remaining; + UCHAR no_rb; + UCHAR rts_reqd; + UCHAR csma_tx_cntrl_2; + UCHAR sifs_tx_cntrl_2; + UCHAR tx_dma_addr_1[2]; + UCHAR tx_dma_addr_2[2]; + UCHAR var_dur_2mhz[2]; + UCHAR var_dur_1mhz[2]; + UCHAR max_dur_2mhz[2]; + UCHAR max_dur_1mhz[2]; + UCHAR hdr_len; + UCHAR max_frag_len[2]; + UCHAR var_len[2]; + UCHAR phy_hdr_4; + UCHAR mac_hdr_1; + UCHAR mac_hdr_2; + UCHAR sid[2]; +}; + +struct phy_header { + UCHAR sfd[2]; + UCHAR hdr_3; + UCHAR hdr_4; +}; +struct rx_msg { + struct mac_header mac; + UCHAR var[1]; +}; + +struct tx_msg { + struct tib_structure tib; + struct phy_header phy; + struct mac_header mac; + UCHAR var[1]; +}; + +/****** ECF Receive Control Stucture (RCS) Area at Shared RAM offset 0x0800 */ +/* Structures for command specific parameters (rcs.var) */ +struct rx_packet_cmd { + UCHAR rx_data_ptr[2]; + UCHAR rx_data_length[2]; + UCHAR rx_sig_lev; + UCHAR next_frag_rcs_index; + UCHAR totalpacketlength[2]; +}; +struct rejoin_net_cmplt_cmd { + UCHAR reserved; + UCHAR bssid[ADDRLEN]; +}; +struct japan_call_sign_rxd { + UCHAR rxd_call_sign[8]; + UCHAR reserved[5]; +}; + +struct rcs { + UCHAR buffer_status; + UCHAR interrupt_id; + UCHAR link_field; + /* command specific parameters */ + union { + UCHAR reserved[13]; + struct rx_packet_cmd rx_packet; + struct rejoin_net_cmplt_cmd rejoin_net_complete; + struct japan_call_sign_rxd japan_call_sign; + } var; +}; + +/****** Startup parameter structures for both versions of firmware ***********/ +struct b4_startup_params { + UCHAR a_network_type; /* C_ADHOC, C_INFRA */ + UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */ + UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */ + UCHAR a_scanning_mode; /* passive 0, active 1 */ + UCHAR a_power_mgt_state; /* CAM 0, */ + UCHAR a_mac_addr[ADDRLEN]; /* */ + UCHAR a_frag_threshold[2]; /* 512 */ + UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */ + UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */ + UCHAR a_dtim_period; /* in beacons */ + UCHAR a_retry_max; /* */ + UCHAR a_ack_timeout; /* */ + UCHAR a_sifs; /* */ + UCHAR a_difs; /* */ + UCHAR a_pifs; /* */ + UCHAR a_rts_threshold[2]; /* */ + UCHAR a_scan_dwell_time[2]; /* */ + UCHAR a_max_scan_dwell_time[2]; /* */ + UCHAR a_assoc_resp_timeout_thresh; /* */ + UCHAR a_adhoc_scan_cycle_max; /* */ + UCHAR a_infra_scan_cycle_max; /* */ + UCHAR a_infra_super_scan_cycle_max; /* */ + UCHAR a_promiscuous_mode; /* */ + UCHAR a_unique_word[2]; /* */ + UCHAR a_slot_time; /* */ + UCHAR a_roaming_low_snr_thresh; /* */ + UCHAR a_low_snr_count_thresh; /* */ + UCHAR a_infra_missed_bcn_thresh; /* */ + UCHAR a_adhoc_missed_bcn_thresh; /* */ + UCHAR a_curr_country_code; /* C_USA */ + UCHAR a_hop_pattern; /* */ + UCHAR a_hop_pattern_length; /* */ +/* b4 - b5 differences start here */ + UCHAR a_cw_max; /* */ + UCHAR a_cw_min; /* */ + UCHAR a_noise_filter_gain; /* */ + UCHAR a_noise_limit_offset; /* */ + UCHAR a_det_rssi_thresh_offset; /* */ + UCHAR a_med_busy_thresh_offset; /* */ + UCHAR a_det_sync_thresh; /* */ + UCHAR a_test_mode; /* */ + UCHAR a_test_min_chan_num; /* */ + UCHAR a_test_max_chan_num; /* */ + UCHAR a_rx_tx_delay; /* */ + UCHAR a_current_bss_id[ADDRLEN]; /* */ + UCHAR a_hop_set; /* */ +}; +struct b5_startup_params { + UCHAR a_network_type; /* C_ADHOC, C_INFRA */ + UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */ + UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */ + UCHAR a_scanning_mode; /* passive 0, active 1 */ + UCHAR a_power_mgt_state; /* CAM 0, */ + UCHAR a_mac_addr[ADDRLEN]; /* */ + UCHAR a_frag_threshold[2]; /* 512 */ + UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */ + UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */ + UCHAR a_dtim_period; /* in beacons */ + UCHAR a_retry_max; /* 4 */ + UCHAR a_ack_timeout; /* */ + UCHAR a_sifs; /* */ + UCHAR a_difs; /* */ + UCHAR a_pifs; /* */ + UCHAR a_rts_threshold[2]; /* */ + UCHAR a_scan_dwell_time[2]; /* */ + UCHAR a_max_scan_dwell_time[2]; /* */ + UCHAR a_assoc_resp_timeout_thresh; /* */ + UCHAR a_adhoc_scan_cycle_max; /* */ + UCHAR a_infra_scan_cycle_max; /* */ + UCHAR a_infra_super_scan_cycle_max; /* */ + UCHAR a_promiscuous_mode; /* */ + UCHAR a_unique_word[2]; /* */ + UCHAR a_slot_time; /* */ + UCHAR a_roaming_low_snr_thresh; /* */ + UCHAR a_low_snr_count_thresh; /* */ + UCHAR a_infra_missed_bcn_thresh; /* */ + UCHAR a_adhoc_missed_bcn_thresh; /* */ + UCHAR a_curr_country_code; /* C_USA */ + UCHAR a_hop_pattern; /* */ + UCHAR a_hop_pattern_length; /* */ +/* b4 - b5 differences start here */ + UCHAR a_cw_max[2]; /* */ + UCHAR a_cw_min[2]; /* */ + UCHAR a_noise_filter_gain; /* */ + UCHAR a_noise_limit_offset; /* */ + UCHAR a_det_rssi_thresh_offset; /* */ + UCHAR a_med_busy_thresh_offset; /* */ + UCHAR a_det_sync_thresh; /* */ + UCHAR a_test_mode; /* */ + UCHAR a_test_min_chan_num; /* */ + UCHAR a_test_max_chan_num; /* */ + UCHAR a_allow_bcast_SSID_probe_rsp; + UCHAR a_privacy_must_start; + UCHAR a_privacy_can_join; + UCHAR a_basic_rate_set[8]; +}; + +/*****************************************************************************/ +#define RAY_IOCG_PARMS (SIOCDEVPRIVATE) +#define RAY_IOCS_PARMS (SIOCDEVPRIVATE + 1) +#define RAY_DO_CMD (SIOCDEVPRIVATE + 2) + +/****** ethernet <-> 802.11 translation **************************************/ +typedef struct snaphdr_t +{ + UCHAR dsap; + UCHAR ssap; + UCHAR ctrl; + UCHAR org[3]; + UCHAR ethertype[2]; +} snaphdr_t; + +#define BRIDGE_ENCAP 0xf80000 +#define RFC1042_ENCAP 0 +#define SNAP_ID 0x0003aaaa +#define RAY_IPX_TYPE 0x8137 +#define APPLEARP_TYPE 0x80f3 +/*****************************************************************************/ +#endif /* #ifndef RAYLINK_H */ diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c new file mode 100644 index 00000000000..ec8cf29ffce --- /dev/null +++ b/drivers/net/wireless/strip.c @@ -0,0 +1,2843 @@ +/* + * Copyright 1996 The Board of Trustees of The Leland Stanford + * Junior University. All Rights Reserved. + * + * Permission to use, copy, modify, and distribute this + * software and its documentation for any purpose and without + * fee is hereby granted, provided that the above copyright + * notice appear in all copies. Stanford University + * makes no representations about the suitability of this + * software for any purpose. It is provided "as is" without + * express or implied warranty. + * + * strip.c This module implements Starmode Radio IP (STRIP) + * for kernel-based devices like TTY. It interfaces between a + * raw TTY, and the kernel's INET protocol layers (via DDI). + * + * Version: @(#)strip.c 1.3 July 1997 + * + * Author: Stuart Cheshire <cheshire@cs.stanford.edu> + * + * Fixes: v0.9 12th Feb 1996 (SC) + * New byte stuffing (2+6 run-length encoding) + * New watchdog timer task + * New Protocol key (SIP0) + * + * v0.9.1 3rd March 1996 (SC) + * Changed to dynamic device allocation -- no more compile + * time (or boot time) limit on the number of STRIP devices. + * + * v0.9.2 13th March 1996 (SC) + * Uses arp cache lookups (but doesn't send arp packets yet) + * + * v0.9.3 17th April 1996 (SC) + * Fixed bug where STR_ERROR flag was getting set unneccessarily + * (causing otherwise good packets to be unneccessarily dropped) + * + * v0.9.4 27th April 1996 (SC) + * First attempt at using "&COMMAND" Starmode AT commands + * + * v0.9.5 29th May 1996 (SC) + * First attempt at sending (unicast) ARP packets + * + * v0.9.6 5th June 1996 (Elliot) + * Put "message level" tags in every "printk" statement + * + * v0.9.7 13th June 1996 (laik) + * Added support for the /proc fs + * + * v0.9.8 July 1996 (Mema) + * Added packet logging + * + * v1.0 November 1996 (SC) + * Fixed (severe) memory leaks in the /proc fs code + * Fixed race conditions in the logging code + * + * v1.1 January 1997 (SC) + * Deleted packet logging (use tcpdump instead) + * Added support for Metricom Firmware v204 features + * (like message checksums) + * + * v1.2 January 1997 (SC) + * Put portables list back in + * + * v1.3 July 1997 (SC) + * Made STRIP driver set the radio's baud rate automatically. + * It is no longer necessarily to manually set the radio's + * rate permanently to 115200 -- the driver handles setting + * the rate automatically. + */ + +#ifdef MODULE +static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR"; +#else +static const char StripVersion[] = "1.3A-STUART.CHESHIRE"; +#endif + +#define TICKLE_TIMERS 0 +#define EXT_COUNTERS 1 + + +/************************************************************************/ +/* Header files */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <asm/system.h> +#include <asm/uaccess.h> + +# include <linux/ctype.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/tty.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/inetdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/if_strip.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/rcupdate.h> +#include <net/arp.h> + +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/time.h> + + +/************************************************************************/ +/* Useful structures and definitions */ + +/* + * A MetricomKey identifies the protocol being carried inside a Metricom + * Starmode packet. + */ + +typedef union { + __u8 c[4]; + __u32 l; +} MetricomKey; + +/* + * An IP address can be viewed as four bytes in memory (which is what it is) or as + * a single 32-bit long (which is convenient for assignment, equality testing etc.) + */ + +typedef union { + __u8 b[4]; + __u32 l; +} IPaddr; + +/* + * A MetricomAddressString is used to hold a printable representation of + * a Metricom address. + */ + +typedef struct { + __u8 c[24]; +} MetricomAddressString; + +/* Encapsulation can expand packet of size x to 65/64x + 1 + * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>" + * 1 1 1-18 1 4 ? 1 + * eg. <CR>*0000-1234*SIP0<encaps payload><CR> + * We allow 31 bytes for the stars, the key, the address and the <CR>s + */ +#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L) + +/* + * A STRIP_Header is never really sent over the radio, but making a dummy + * header for internal use within the kernel that looks like an Ethernet + * header makes certain other software happier. For example, tcpdump + * already understands Ethernet headers. + */ + +typedef struct { + MetricomAddress dst_addr; /* Destination address, e.g. "0000-1234" */ + MetricomAddress src_addr; /* Source address, e.g. "0000-5678" */ + unsigned short protocol; /* The protocol type, using Ethernet codes */ +} STRIP_Header; + +typedef struct { + char c[60]; +} MetricomNode; + +#define NODE_TABLE_SIZE 32 +typedef struct { + struct timeval timestamp; + int num_nodes; + MetricomNode node[NODE_TABLE_SIZE]; +} MetricomNodeTable; + +enum { FALSE = 0, TRUE = 1 }; + +/* + * Holds the radio's firmware version. + */ +typedef struct { + char c[50]; +} FirmwareVersion; + +/* + * Holds the radio's serial number. + */ +typedef struct { + char c[18]; +} SerialNumber; + +/* + * Holds the radio's battery voltage. + */ +typedef struct { + char c[11]; +} BatteryVoltage; + +typedef struct { + char c[8]; +} char8; + +enum { + NoStructure = 0, /* Really old firmware */ + StructuredMessages = 1, /* Parsable AT response msgs */ + ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */ +} FirmwareLevel; + +struct strip { + int magic; + /* + * These are pointers to the malloc()ed frame buffers. + */ + + unsigned char *rx_buff; /* buffer for received IP packet */ + unsigned char *sx_buff; /* buffer for received serial data */ + int sx_count; /* received serial data counter */ + int sx_size; /* Serial buffer size */ + unsigned char *tx_buff; /* transmitter buffer */ + unsigned char *tx_head; /* pointer to next byte to XMIT */ + int tx_left; /* bytes left in XMIT queue */ + int tx_size; /* Serial buffer size */ + + /* + * STRIP interface statistics. + */ + + unsigned long rx_packets; /* inbound frames counter */ + unsigned long tx_packets; /* outbound frames counter */ + unsigned long rx_errors; /* Parity, etc. errors */ + unsigned long tx_errors; /* Planned stuff */ + unsigned long rx_dropped; /* No memory for skb */ + unsigned long tx_dropped; /* When MTU change */ + unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */ + + unsigned long pps_timer; /* Timer to determine pps */ + unsigned long rx_pps_count; /* Counter to determine pps */ + unsigned long tx_pps_count; /* Counter to determine pps */ + unsigned long sx_pps_count; /* Counter to determine pps */ + unsigned long rx_average_pps; /* rx packets per second * 8 */ + unsigned long tx_average_pps; /* tx packets per second * 8 */ + unsigned long sx_average_pps; /* sent packets per second * 8 */ + +#ifdef EXT_COUNTERS + unsigned long rx_bytes; /* total received bytes */ + unsigned long tx_bytes; /* total received bytes */ + unsigned long rx_rbytes; /* bytes thru radio i/f */ + unsigned long tx_rbytes; /* bytes thru radio i/f */ + unsigned long rx_sbytes; /* tot bytes thru serial i/f */ + unsigned long tx_sbytes; /* tot bytes thru serial i/f */ + unsigned long rx_ebytes; /* tot stat/err bytes */ + unsigned long tx_ebytes; /* tot stat/err bytes */ +#endif + + /* + * Internal variables. + */ + + struct list_head list; /* Linked list of devices */ + + int discard; /* Set if serial error */ + int working; /* Is radio working correctly? */ + int firmware_level; /* Message structuring level */ + int next_command; /* Next periodic command */ + unsigned int user_baud; /* The user-selected baud rate */ + int mtu; /* Our mtu (to spot changes!) */ + long watchdog_doprobe; /* Next time to test the radio */ + long watchdog_doreset; /* Time to do next reset */ + long gratuitous_arp; /* Time to send next ARP refresh */ + long arp_interval; /* Next ARP interval */ + struct timer_list idle_timer; /* For periodic wakeup calls */ + MetricomAddress true_dev_addr; /* True address of radio */ + int manual_dev_addr; /* Hack: See note below */ + + FirmwareVersion firmware_version; /* The radio's firmware version */ + SerialNumber serial_number; /* The radio's serial number */ + BatteryVoltage battery_voltage; /* The radio's battery voltage */ + + /* + * Other useful structures. + */ + + struct tty_struct *tty; /* ptr to TTY structure */ + struct net_device *dev; /* Our device structure */ + + /* + * Neighbour radio records + */ + + MetricomNodeTable portables; + MetricomNodeTable poletops; +}; + +/* + * Note: manual_dev_addr hack + * + * It is not possible to change the hardware address of a Metricom radio, + * or to send packets with a user-specified hardware source address, thus + * trying to manually set a hardware source address is a questionable + * thing to do. However, if the user *does* manually set the hardware + * source address of a STRIP interface, then the kernel will believe it, + * and use it in certain places. For example, the hardware address listed + * by ifconfig will be the manual address, not the true one. + * (Both addresses are listed in /proc/net/strip.) + * Also, ARP packets will be sent out giving the user-specified address as + * the source address, not the real address. This is dangerous, because + * it means you won't receive any replies -- the ARP replies will go to + * the specified address, which will be some other radio. The case where + * this is useful is when that other radio is also connected to the same + * machine. This allows you to connect a pair of radios to one machine, + * and to use one exclusively for inbound traffic, and the other + * exclusively for outbound traffic. Pretty neat, huh? + * + * Here's the full procedure to set this up: + * + * 1. "slattach" two interfaces, e.g. st0 for outgoing packets, + * and st1 for incoming packets + * + * 2. "ifconfig" st0 (outbound radio) to have the hardware address + * which is the real hardware address of st1 (inbound radio). + * Now when it sends out packets, it will masquerade as st1, and + * replies will be sent to that radio, which is exactly what we want. + * + * 3. Set the route table entry ("route add default ..." or + * "route add -net ...", as appropriate) to send packets via the st0 + * interface (outbound radio). Do not add any route which sends packets + * out via the st1 interface -- that radio is for inbound traffic only. + * + * 4. "ifconfig" st1 (inbound radio) to have hardware address zero. + * This tells the STRIP driver to "shut down" that interface and not + * send any packets through it. In particular, it stops sending the + * periodic gratuitous ARP packets that a STRIP interface normally sends. + * Also, when packets arrive on that interface, it will search the + * interface list to see if there is another interface who's manual + * hardware address matches its own real address (i.e. st0 in this + * example) and if so it will transfer ownership of the skbuff to + * that interface, so that it looks to the kernel as if the packet + * arrived on that interface. This is necessary because when the + * kernel sends an ARP packet on st0, it expects to get a reply on + * st0, and if it sees the reply come from st1 then it will ignore + * it (to be accurate, it puts the entry in the ARP table, but + * labelled in such a way that st0 can't use it). + * + * Thanks to Petros Maniatis for coming up with the idea of splitting + * inbound and outbound traffic between two interfaces, which turned + * out to be really easy to implement, even if it is a bit of a hack. + * + * Having set a manual address on an interface, you can restore it + * to automatic operation (where the address is automatically kept + * consistent with the real address of the radio) by setting a manual + * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF" + * This 'turns off' manual override mode for the device address. + * + * Note: The IEEE 802 headers reported in tcpdump will show the *real* + * radio addresses the packets were sent and received from, so that you + * can see what is really going on with packets, and which interfaces + * they are really going through. + */ + + +/************************************************************************/ +/* Constants */ + +/* + * CommandString1 works on all radios + * Other CommandStrings are only used with firmware that provides structured responses. + * + * ats319=1 Enables Info message for node additions and deletions + * ats319=2 Enables Info message for a new best node + * ats319=4 Enables checksums + * ats319=8 Enables ACK messages + */ + +static const int MaxCommandStringLength = 32; +static const int CompatibilityCommand = 1; + +static const char CommandString0[] = "*&COMMAND*ATS319=7"; /* Turn on checksums & info messages */ +static const char CommandString1[] = "*&COMMAND*ATS305?"; /* Query radio name */ +static const char CommandString2[] = "*&COMMAND*ATS325?"; /* Query battery voltage */ +static const char CommandString3[] = "*&COMMAND*ATS300?"; /* Query version information */ +static const char CommandString4[] = "*&COMMAND*ATS311?"; /* Query poletop list */ +static const char CommandString5[] = "*&COMMAND*AT~LA"; /* Query portables list */ +typedef struct { + const char *string; + long length; +} StringDescriptor; + +static const StringDescriptor CommandString[] = { + {CommandString0, sizeof(CommandString0) - 1}, + {CommandString1, sizeof(CommandString1) - 1}, + {CommandString2, sizeof(CommandString2) - 1}, + {CommandString3, sizeof(CommandString3) - 1}, + {CommandString4, sizeof(CommandString4) - 1}, + {CommandString5, sizeof(CommandString5) - 1} +}; + +#define GOT_ALL_RADIO_INFO(S) \ + ((S)->firmware_version.c[0] && \ + (S)->battery_voltage.c[0] && \ + memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address))) + +static const char hextable[16] = "0123456789ABCDEF"; + +static const MetricomAddress zero_address; +static const MetricomAddress broadcast_address = + { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} }; + +static const MetricomKey SIP0Key = { "SIP0" }; +static const MetricomKey ARP0Key = { "ARP0" }; +static const MetricomKey ATR_Key = { "ATR " }; +static const MetricomKey ACK_Key = { "ACK_" }; +static const MetricomKey INF_Key = { "INF_" }; +static const MetricomKey ERR_Key = { "ERR_" }; + +static const long MaxARPInterval = 60 * HZ; /* One minute */ + +/* + * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for + * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion + * for STRIP encoding, that translates to a maximum payload MTU of 1155. + * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes + * long, including IP header, UDP header, and NFS header. Setting the STRIP + * MTU to 1152 allows us to send default sized NFS packets without fragmentation. + */ +static const unsigned short MAX_SEND_MTU = 1152; +static const unsigned short MAX_RECV_MTU = 1500; /* Hoping for Ethernet sized packets in the future! */ +static const unsigned short DEFAULT_STRIP_MTU = 1152; +static const int STRIP_MAGIC = 0x5303; +static const long LongTime = 0x7FFFFFFF; + +/************************************************************************/ +/* Global variables */ + +static LIST_HEAD(strip_list); +static DEFINE_SPINLOCK(strip_lock); + +/************************************************************************/ +/* Macros */ + +/* Returns TRUE if text T begins with prefix P */ +#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1)) + +/* Returns TRUE if text T of length L is equal to string S */ +#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1)) + +#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' : \ + (X)>='a' && (X)<='f' ? (X)-'a'+10 : \ + (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 ) + +#define READHEX16(X) ((__u16)(READHEX(X))) + +#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0) + +#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) + +#define JIFFIE_TO_SEC(X) ((X) / HZ) + + +/************************************************************************/ +/* Utility routines */ + +static int arp_query(unsigned char *haddr, u32 paddr, + struct net_device *dev) +{ + struct neighbour *neighbor_entry; + + neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev); + + if (neighbor_entry != NULL) { + neighbor_entry->used = jiffies; + if (neighbor_entry->nud_state & NUD_VALID) { + memcpy(haddr, neighbor_entry->ha, dev->addr_len); + return 1; + } + } + return 0; +} + +static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr, + __u8 * end) +{ + static const int MAX_DumpData = 80; + __u8 pkt_text[MAX_DumpData], *p = pkt_text; + + *p++ = '\"'; + + while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) { + if (*ptr == '\\') { + *p++ = '\\'; + *p++ = '\\'; + } else { + if (*ptr >= 32 && *ptr <= 126) { + *p++ = *ptr; + } else { + sprintf(p, "\\%02X", *ptr); + p += 3; + } + } + ptr++; + } + + if (ptr == end) + *p++ = '\"'; + *p++ = 0; + + printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text); +} + + +/************************************************************************/ +/* Byte stuffing/unstuffing routines */ + +/* Stuffing scheme: + * 00 Unused (reserved character) + * 01-3F Run of 2-64 different characters + * 40-7F Run of 1-64 different characters plus a single zero at the end + * 80-BF Run of 1-64 of the same character + * C0-FF Run of 1-64 zeroes (ASCII 0) + */ + +typedef enum { + Stuff_Diff = 0x00, + Stuff_DiffZero = 0x40, + Stuff_Same = 0x80, + Stuff_Zero = 0xC0, + Stuff_NoCode = 0xFF, /* Special code, meaning no code selected */ + + Stuff_CodeMask = 0xC0, + Stuff_CountMask = 0x3F, + Stuff_MaxCount = 0x3F, + Stuff_Magic = 0x0D /* The value we are eliminating */ +} StuffingCode; + +/* StuffData encodes the data starting at "src" for "length" bytes. + * It writes it to the buffer pointed to by "dst" (which must be at least + * as long as 1 + 65/64 of the input length). The output may be up to 1.6% + * larger than the input for pathological input, but will usually be smaller. + * StuffData returns the new value of the dst pointer as its result. + * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state + * between calls, allowing an encoded packet to be incrementally built up + * from small parts. On the first call, the "__u8 *" pointed to should be + * initialized to NULL; between subsequent calls the calling routine should + * leave the value alone and simply pass it back unchanged so that the + * encoder can recover its current state. + */ + +#define StuffData_FinishBlock(X) \ +(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode) + +static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst, + __u8 ** code_ptr_ptr) +{ + __u8 *end = src + length; + __u8 *code_ptr = *code_ptr_ptr; + __u8 code = Stuff_NoCode, count = 0; + + if (!length) + return (dst); + + if (code_ptr) { + /* + * Recover state from last call, if applicable + */ + code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask; + count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask; + } + + while (src < end) { + switch (code) { + /* Stuff_NoCode: If no current code, select one */ + case Stuff_NoCode: + /* Record where we're going to put this code */ + code_ptr = dst++; + count = 0; /* Reset the count (zero means one instance) */ + /* Tentatively start a new block */ + if (*src == 0) { + code = Stuff_Zero; + src++; + } else { + code = Stuff_Same; + *dst++ = *src++ ^ Stuff_Magic; + } + /* Note: We optimistically assume run of same -- */ + /* which will be fixed later in Stuff_Same */ + /* if it turns out not to be true. */ + break; + + /* Stuff_Zero: We already have at least one zero encoded */ + case Stuff_Zero: + /* If another zero, count it, else finish this code block */ + if (*src == 0) { + count++; + src++; + } else { + StuffData_FinishBlock(Stuff_Zero + count); + } + break; + + /* Stuff_Same: We already have at least one byte encoded */ + case Stuff_Same: + /* If another one the same, count it */ + if ((*src ^ Stuff_Magic) == code_ptr[1]) { + count++; + src++; + break; + } + /* else, this byte does not match this block. */ + /* If we already have two or more bytes encoded, finish this code block */ + if (count) { + StuffData_FinishBlock(Stuff_Same + count); + break; + } + /* else, we only have one so far, so switch to Stuff_Diff code */ + code = Stuff_Diff; + /* and fall through to Stuff_Diff case below + * Note cunning cleverness here: case Stuff_Diff compares + * the current character with the previous two to see if it + * has a run of three the same. Won't this be an error if + * there aren't two previous characters stored to compare with? + * No. Because we know the current character is *not* the same + * as the previous one, the first test below will necessarily + * fail and the send half of the "if" won't be executed. + */ + + /* Stuff_Diff: We have at least two *different* bytes encoded */ + case Stuff_Diff: + /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */ + if (*src == 0) { + StuffData_FinishBlock(Stuff_DiffZero + + count); + } + /* else, if we have three in a row, it is worth starting a Stuff_Same block */ + else if ((*src ^ Stuff_Magic) == dst[-1] + && dst[-1] == dst[-2]) { + /* Back off the last two characters we encoded */ + code += count - 2; + /* Note: "Stuff_Diff + 0" is an illegal code */ + if (code == Stuff_Diff + 0) { + code = Stuff_Same + 0; + } + StuffData_FinishBlock(code); + code_ptr = dst - 2; + /* dst[-1] already holds the correct value */ + count = 2; /* 2 means three bytes encoded */ + code = Stuff_Same; + } + /* else, another different byte, so add it to the block */ + else { + *dst++ = *src ^ Stuff_Magic; + count++; + } + src++; /* Consume the byte */ + break; + } + if (count == Stuff_MaxCount) { + StuffData_FinishBlock(code + count); + } + } + if (code == Stuff_NoCode) { + *code_ptr_ptr = NULL; + } else { + *code_ptr_ptr = code_ptr; + StuffData_FinishBlock(code + count); + } + return (dst); +} + +/* + * UnStuffData decodes the data at "src", up to (but not including) "end". + * It writes the decoded data into the buffer pointed to by "dst", up to a + * maximum of "dst_length", and returns the new value of "src" so that a + * follow-on call can read more data, continuing from where the first left off. + * + * There are three types of results: + * 1. The source data runs out before extracting "dst_length" bytes: + * UnStuffData returns NULL to indicate failure. + * 2. The source data produces exactly "dst_length" bytes: + * UnStuffData returns new_src = end to indicate that all bytes were consumed. + * 3. "dst_length" bytes are extracted, with more remaining. + * UnStuffData returns new_src < end to indicate that there are more bytes + * to be read. + * + * Note: The decoding may be destructive, in that it may alter the source + * data in the process of decoding it (this is necessary to allow a follow-on + * call to resume correctly). + */ + +static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst, + __u32 dst_length) +{ + __u8 *dst_end = dst + dst_length; + /* Sanity check */ + if (!src || !end || !dst || !dst_length) + return (NULL); + while (src < end && dst < dst_end) { + int count = (*src ^ Stuff_Magic) & Stuff_CountMask; + switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) { + case Stuff_Diff: + if (src + 1 + count >= end) + return (NULL); + do { + *dst++ = *++src ^ Stuff_Magic; + } + while (--count >= 0 && dst < dst_end); + if (count < 0) + src += 1; + else { + if (count == 0) + *src = Stuff_Same ^ Stuff_Magic; + else + *src = + (Stuff_Diff + + count) ^ Stuff_Magic; + } + break; + case Stuff_DiffZero: + if (src + 1 + count >= end) + return (NULL); + do { + *dst++ = *++src ^ Stuff_Magic; + } + while (--count >= 0 && dst < dst_end); + if (count < 0) + *src = Stuff_Zero ^ Stuff_Magic; + else + *src = + (Stuff_DiffZero + count) ^ Stuff_Magic; + break; + case Stuff_Same: + if (src + 1 >= end) + return (NULL); + do { + *dst++ = src[1] ^ Stuff_Magic; + } + while (--count >= 0 && dst < dst_end); + if (count < 0) + src += 2; + else + *src = (Stuff_Same + count) ^ Stuff_Magic; + break; + case Stuff_Zero: + do { + *dst++ = 0; + } + while (--count >= 0 && dst < dst_end); + if (count < 0) + src += 1; + else + *src = (Stuff_Zero + count) ^ Stuff_Magic; + break; + } + } + if (dst < dst_end) + return (NULL); + else + return (src); +} + + +/************************************************************************/ +/* General routines for STRIP */ + +/* + * get_baud returns the current baud rate, as one of the constants defined in + * termbits.h + * If the user has issued a baud rate override using the 'setserial' command + * and the logical current rate is set to 38.4, then the true baud rate + * currently in effect (57.6 or 115.2) is returned. + */ +static unsigned int get_baud(struct tty_struct *tty) +{ + if (!tty || !tty->termios) + return (0); + if ((tty->termios->c_cflag & CBAUD) == B38400 && tty->driver_data) { + struct async_struct *info = + (struct async_struct *) tty->driver_data; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + return (B57600); + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + return (B115200); + } + return (tty->termios->c_cflag & CBAUD); +} + +/* + * set_baud sets the baud rate to the rate defined by baudcode + * Note: The rate B38400 should be avoided, because the user may have + * issued a 'setserial' speed override to map that to a different speed. + * We could achieve a true rate of 38400 if we needed to by cancelling + * any user speed override that is in place, but that might annoy the + * user, so it is simplest to just avoid using 38400. + */ +static void set_baud(struct tty_struct *tty, unsigned int baudcode) +{ + struct termios old_termios = *(tty->termios); + tty->termios->c_cflag &= ~CBAUD; /* Clear the old baud setting */ + tty->termios->c_cflag |= baudcode; /* Set the new baud setting */ + tty->driver->set_termios(tty, &old_termios); +} + +/* + * Convert a string to a Metricom Address. + */ + +#define IS_RADIO_ADDRESS(p) ( \ + isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \ + (p)[4] == '-' && \ + isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8]) ) + +static int string_to_radio_address(MetricomAddress * addr, __u8 * p) +{ + if (!IS_RADIO_ADDRESS(p)) + return (1); + addr->c[0] = 0; + addr->c[1] = 0; + addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]); + addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]); + addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]); + addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]); + return (0); +} + +/* + * Convert a Metricom Address to a string. + */ + +static __u8 *radio_address_to_string(const MetricomAddress * addr, + MetricomAddressString * p) +{ + sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3], + addr->c[4], addr->c[5]); + return (p->c); +} + +/* + * Note: Must make sure sx_size is big enough to receive a stuffed + * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's + * big enough to receive a large radio neighbour list (currently 4K). + */ + +static int allocate_buffers(struct strip *strip_info, int mtu) +{ + struct net_device *dev = strip_info->dev; + int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096); + int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength; + __u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC); + __u8 *s = kmalloc(sx_size, GFP_ATOMIC); + __u8 *t = kmalloc(tx_size, GFP_ATOMIC); + if (r && s && t) { + strip_info->rx_buff = r; + strip_info->sx_buff = s; + strip_info->tx_buff = t; + strip_info->sx_size = sx_size; + strip_info->tx_size = tx_size; + strip_info->mtu = dev->mtu = mtu; + return (1); + } + if (r) + kfree(r); + if (s) + kfree(s); + if (t) + kfree(t); + return (0); +} + +/* + * MTU has been changed by the IP layer. + * We could be in + * an upcall from the tty driver, or in an ip packet queue. + */ +static int strip_change_mtu(struct net_device *dev, int new_mtu) +{ + struct strip *strip_info = netdev_priv(dev); + int old_mtu = strip_info->mtu; + unsigned char *orbuff = strip_info->rx_buff; + unsigned char *osbuff = strip_info->sx_buff; + unsigned char *otbuff = strip_info->tx_buff; + + if (new_mtu > MAX_SEND_MTU) { + printk(KERN_ERR + "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n", + strip_info->dev->name, MAX_SEND_MTU); + return -EINVAL; + } + + spin_lock_bh(&strip_lock); + if (!allocate_buffers(strip_info, new_mtu)) { + printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n", + strip_info->dev->name); + spin_unlock_bh(&strip_lock); + return -ENOMEM; + } + + if (strip_info->sx_count) { + if (strip_info->sx_count <= strip_info->sx_size) + memcpy(strip_info->sx_buff, osbuff, + strip_info->sx_count); + else { + strip_info->discard = strip_info->sx_count; + strip_info->rx_over_errors++; + } + } + + if (strip_info->tx_left) { + if (strip_info->tx_left <= strip_info->tx_size) + memcpy(strip_info->tx_buff, strip_info->tx_head, + strip_info->tx_left); + else { + strip_info->tx_left = 0; + strip_info->tx_dropped++; + } + } + strip_info->tx_head = strip_info->tx_buff; + spin_unlock_bh(&strip_lock); + + printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", + strip_info->dev->name, old_mtu, strip_info->mtu); + + if (orbuff) + kfree(orbuff); + if (osbuff) + kfree(osbuff); + if (otbuff) + kfree(otbuff); + + return 0; +} + +static void strip_unlock(struct strip *strip_info) +{ + /* + * Set the timer to go off in one second. + */ + strip_info->idle_timer.expires = jiffies + 1 * HZ; + add_timer(&strip_info->idle_timer); + netif_wake_queue(strip_info->dev); +} + + + +/* + * If the time is in the near future, time_delta prints the number of + * seconds to go into the buffer and returns the address of the buffer. + * If the time is not in the near future, it returns the address of the + * string "Not scheduled" The buffer must be long enough to contain the + * ascii representation of the number plus 9 charactes for the " seconds" + * and the null character. + */ +#ifdef CONFIG_PROC_FS +static char *time_delta(char buffer[], long time) +{ + time -= jiffies; + if (time > LongTime / 2) + return ("Not scheduled"); + if (time < 0) + time = 0; /* Don't print negative times */ + sprintf(buffer, "%ld seconds", time / HZ); + return (buffer); +} + +/* get Nth element of the linked list */ +static struct strip *strip_get_idx(loff_t pos) +{ + struct list_head *l; + int i = 0; + + list_for_each_rcu(l, &strip_list) { + if (pos == i) + return list_entry(l, struct strip, list); + ++i; + } + return NULL; +} + +static void *strip_seq_start(struct seq_file *seq, loff_t *pos) +{ + rcu_read_lock(); + return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN; +} + +static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + struct list_head *l; + struct strip *s; + + ++*pos; + if (v == SEQ_START_TOKEN) + return strip_get_idx(1); + + s = v; + l = &s->list; + list_for_each_continue_rcu(l, &strip_list) { + return list_entry(l, struct strip, list); + } + return NULL; +} + +static void strip_seq_stop(struct seq_file *seq, void *v) +{ + rcu_read_unlock(); +} + +static void strip_seq_neighbours(struct seq_file *seq, + const MetricomNodeTable * table, + const char *title) +{ + /* We wrap this in a do/while loop, so if the table changes */ + /* while we're reading it, we just go around and try again. */ + struct timeval t; + + do { + int i; + t = table->timestamp; + if (table->num_nodes) + seq_printf(seq, "\n %s\n", title); + for (i = 0; i < table->num_nodes; i++) { + MetricomNode node; + + spin_lock_bh(&strip_lock); + node = table->node[i]; + spin_unlock_bh(&strip_lock); + seq_printf(seq, " %s\n", node.c); + } + } while (table->timestamp.tv_sec != t.tv_sec + || table->timestamp.tv_usec != t.tv_usec); +} + +/* + * This function prints radio status information via the seq_file + * interface. The interface takes care of buffer size and over + * run issues. + * + * The buffer in seq_file is PAGESIZE (4K) + * so this routine should never print more or it will get truncated. + * With the maximum of 32 portables and 32 poletops + * reported, the routine outputs 3107 bytes into the buffer. + */ +static void strip_seq_status_info(struct seq_file *seq, + const struct strip *strip_info) +{ + char temp[32]; + MetricomAddressString addr_string; + + /* First, we must copy all of our data to a safe place, */ + /* in case a serial interrupt comes in and changes it. */ + int tx_left = strip_info->tx_left; + unsigned long rx_average_pps = strip_info->rx_average_pps; + unsigned long tx_average_pps = strip_info->tx_average_pps; + unsigned long sx_average_pps = strip_info->sx_average_pps; + int working = strip_info->working; + int firmware_level = strip_info->firmware_level; + long watchdog_doprobe = strip_info->watchdog_doprobe; + long watchdog_doreset = strip_info->watchdog_doreset; + long gratuitous_arp = strip_info->gratuitous_arp; + long arp_interval = strip_info->arp_interval; + FirmwareVersion firmware_version = strip_info->firmware_version; + SerialNumber serial_number = strip_info->serial_number; + BatteryVoltage battery_voltage = strip_info->battery_voltage; + char *if_name = strip_info->dev->name; + MetricomAddress true_dev_addr = strip_info->true_dev_addr; + MetricomAddress dev_dev_addr = + *(MetricomAddress *) strip_info->dev->dev_addr; + int manual_dev_addr = strip_info->manual_dev_addr; +#ifdef EXT_COUNTERS + unsigned long rx_bytes = strip_info->rx_bytes; + unsigned long tx_bytes = strip_info->tx_bytes; + unsigned long rx_rbytes = strip_info->rx_rbytes; + unsigned long tx_rbytes = strip_info->tx_rbytes; + unsigned long rx_sbytes = strip_info->rx_sbytes; + unsigned long tx_sbytes = strip_info->tx_sbytes; + unsigned long rx_ebytes = strip_info->rx_ebytes; + unsigned long tx_ebytes = strip_info->tx_ebytes; +#endif + + seq_printf(seq, "\nInterface name\t\t%s\n", if_name); + seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No"); + radio_address_to_string(&true_dev_addr, &addr_string); + seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c); + if (manual_dev_addr) { + radio_address_to_string(&dev_dev_addr, &addr_string); + seq_printf(seq, " Device address:\t%s\n", addr_string.c); + } + seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" : + !firmware_level ? "Should be upgraded" : + firmware_version.c); + if (firmware_level >= ChecksummedMessages) + seq_printf(seq, " (Checksums Enabled)"); + seq_printf(seq, "\n"); + seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c); + seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c); + seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left); + seq_printf(seq, " Receive packet rate: %ld packets per second\n", + rx_average_pps / 8); + seq_printf(seq, " Transmit packet rate: %ld packets per second\n", + tx_average_pps / 8); + seq_printf(seq, " Sent packet rate: %ld packets per second\n", + sx_average_pps / 8); + seq_printf(seq, " Next watchdog probe:\t%s\n", + time_delta(temp, watchdog_doprobe)); + seq_printf(seq, " Next watchdog reset:\t%s\n", + time_delta(temp, watchdog_doreset)); + seq_printf(seq, " Next gratuitous ARP:\t"); + + if (!memcmp + (strip_info->dev->dev_addr, zero_address.c, + sizeof(zero_address))) + seq_printf(seq, "Disabled\n"); + else { + seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp)); + seq_printf(seq, " Next ARP interval:\t%ld seconds\n", + JIFFIE_TO_SEC(arp_interval)); + } + + if (working) { +#ifdef EXT_COUNTERS + seq_printf(seq, "\n"); + seq_printf(seq, + " Total bytes: \trx:\t%lu\ttx:\t%lu\n", + rx_bytes, tx_bytes); + seq_printf(seq, + " thru radio: \trx:\t%lu\ttx:\t%lu\n", + rx_rbytes, tx_rbytes); + seq_printf(seq, + " thru serial port: \trx:\t%lu\ttx:\t%lu\n", + rx_sbytes, tx_sbytes); + seq_printf(seq, + " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n", + rx_ebytes, tx_ebytes); +#endif + strip_seq_neighbours(seq, &strip_info->poletops, + "Poletops:"); + strip_seq_neighbours(seq, &strip_info->portables, + "Portables:"); + } +} + +/* + * This function is exports status information from the STRIP driver through + * the /proc file system. + */ +static int strip_seq_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) + seq_printf(seq, "strip_version: %s\n", StripVersion); + else + strip_seq_status_info(seq, (const struct strip *)v); + return 0; +} + + +static struct seq_operations strip_seq_ops = { + .start = strip_seq_start, + .next = strip_seq_next, + .stop = strip_seq_stop, + .show = strip_seq_show, +}; + +static int strip_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &strip_seq_ops); +} + +static struct file_operations strip_seq_fops = { + .owner = THIS_MODULE, + .open = strip_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +#endif + + + +/************************************************************************/ +/* Sending routines */ + +static void ResetRadio(struct strip *strip_info) +{ + struct tty_struct *tty = strip_info->tty; + static const char init[] = "ate0q1dt**starmode\r**"; + StringDescriptor s = { init, sizeof(init) - 1 }; + + /* + * If the radio isn't working anymore, + * we should clear the old status information. + */ + if (strip_info->working) { + printk(KERN_INFO "%s: No response: Resetting radio.\n", + strip_info->dev->name); + strip_info->firmware_version.c[0] = '\0'; + strip_info->serial_number.c[0] = '\0'; + strip_info->battery_voltage.c[0] = '\0'; + strip_info->portables.num_nodes = 0; + do_gettimeofday(&strip_info->portables.timestamp); + strip_info->poletops.num_nodes = 0; + do_gettimeofday(&strip_info->poletops.timestamp); + } + + strip_info->pps_timer = jiffies; + strip_info->rx_pps_count = 0; + strip_info->tx_pps_count = 0; + strip_info->sx_pps_count = 0; + strip_info->rx_average_pps = 0; + strip_info->tx_average_pps = 0; + strip_info->sx_average_pps = 0; + + /* Mark radio address as unknown */ + *(MetricomAddress *) & strip_info->true_dev_addr = zero_address; + if (!strip_info->manual_dev_addr) + *(MetricomAddress *) strip_info->dev->dev_addr = + zero_address; + strip_info->working = FALSE; + strip_info->firmware_level = NoStructure; + strip_info->next_command = CompatibilityCommand; + strip_info->watchdog_doprobe = jiffies + 10 * HZ; + strip_info->watchdog_doreset = jiffies + 1 * HZ; + + /* If the user has selected a baud rate above 38.4 see what magic we have to do */ + if (strip_info->user_baud > B38400) { + /* + * Subtle stuff: Pay attention :-) + * If the serial port is currently at the user's selected (>38.4) rate, + * then we temporarily switch to 19.2 and issue the ATS304 command + * to tell the radio to switch to the user's selected rate. + * If the serial port is not currently at that rate, that means we just + * issued the ATS304 command last time through, so this time we restore + * the user's selected rate and issue the normal starmode reset string. + */ + if (strip_info->user_baud == get_baud(tty)) { + static const char b0[] = "ate0q1s304=57600\r"; + static const char b1[] = "ate0q1s304=115200\r"; + static const StringDescriptor baudstring[2] = + { {b0, sizeof(b0) - 1} + , {b1, sizeof(b1) - 1} + }; + set_baud(tty, B19200); + if (strip_info->user_baud == B57600) + s = baudstring[0]; + else if (strip_info->user_baud == B115200) + s = baudstring[1]; + else + s = baudstring[1]; /* For now */ + } else + set_baud(tty, strip_info->user_baud); + } + + tty->driver->write(tty, s.string, s.length); +#ifdef EXT_COUNTERS + strip_info->tx_ebytes += s.length; +#endif +} + +/* + * Called by the driver when there's room for more data. If we have + * more packets to send, we send them here. + */ + +static void strip_write_some_more(struct tty_struct *tty) +{ + struct strip *strip_info = (struct strip *) tty->disc_data; + + /* First make sure we're connected. */ + if (!strip_info || strip_info->magic != STRIP_MAGIC || + !netif_running(strip_info->dev)) + return; + + if (strip_info->tx_left > 0) { + int num_written = + tty->driver->write(tty, strip_info->tx_head, + strip_info->tx_left); + strip_info->tx_left -= num_written; + strip_info->tx_head += num_written; +#ifdef EXT_COUNTERS + strip_info->tx_sbytes += num_written; +#endif + } else { /* Else start transmission of another packet */ + + tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); + strip_unlock(strip_info); + } +} + +static __u8 *add_checksum(__u8 * buffer, __u8 * end) +{ + __u16 sum = 0; + __u8 *p = buffer; + while (p < end) + sum += *p++; + end[3] = hextable[sum & 0xF]; + sum >>= 4; + end[2] = hextable[sum & 0xF]; + sum >>= 4; + end[1] = hextable[sum & 0xF]; + sum >>= 4; + end[0] = hextable[sum & 0xF]; + return (end + 4); +} + +static unsigned char *strip_make_packet(unsigned char *buffer, + struct strip *strip_info, + struct sk_buff *skb) +{ + __u8 *ptr = buffer; + __u8 *stuffstate = NULL; + STRIP_Header *header = (STRIP_Header *) skb->data; + MetricomAddress haddr = header->dst_addr; + int len = skb->len - sizeof(STRIP_Header); + MetricomKey key; + + /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */ + + if (header->protocol == htons(ETH_P_IP)) + key = SIP0Key; + else if (header->protocol == htons(ETH_P_ARP)) + key = ARP0Key; + else { + printk(KERN_ERR + "%s: strip_make_packet: Unknown packet type 0x%04X\n", + strip_info->dev->name, ntohs(header->protocol)); + return (NULL); + } + + if (len > strip_info->mtu) { + printk(KERN_ERR + "%s: Dropping oversized transmit packet: %d bytes\n", + strip_info->dev->name, len); + return (NULL); + } + + /* + * If we're sending to ourselves, discard the packet. + * (Metricom radios choke if they try to send a packet to their own address.) + */ + if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) { + printk(KERN_ERR "%s: Dropping packet addressed to self\n", + strip_info->dev->name); + return (NULL); + } + + /* + * If this is a broadcast packet, send it to our designated Metricom + * 'broadcast hub' radio (First byte of address being 0xFF means broadcast) + */ + if (haddr.c[0] == 0xFF) { + u32 brd = 0; + struct in_device *in_dev; + + rcu_read_lock(); + in_dev = __in_dev_get(strip_info->dev); + if (in_dev == NULL) { + rcu_read_unlock(); + return NULL; + } + if (in_dev->ifa_list) + brd = in_dev->ifa_list->ifa_broadcast; + rcu_read_unlock(); + + /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */ + if (!arp_query(haddr.c, brd, strip_info->dev)) { + printk(KERN_ERR + "%s: Unable to send packet (no broadcast hub configured)\n", + strip_info->dev->name); + return (NULL); + } + /* + * If we are the broadcast hub, don't bother sending to ourselves. + * (Metricom radios choke if they try to send a packet to their own address.) + */ + if (!memcmp + (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) + return (NULL); + } + + *ptr++ = 0x0D; + *ptr++ = '*'; + *ptr++ = hextable[haddr.c[2] >> 4]; + *ptr++ = hextable[haddr.c[2] & 0xF]; + *ptr++ = hextable[haddr.c[3] >> 4]; + *ptr++ = hextable[haddr.c[3] & 0xF]; + *ptr++ = '-'; + *ptr++ = hextable[haddr.c[4] >> 4]; + *ptr++ = hextable[haddr.c[4] & 0xF]; + *ptr++ = hextable[haddr.c[5] >> 4]; + *ptr++ = hextable[haddr.c[5] & 0xF]; + *ptr++ = '*'; + *ptr++ = key.c[0]; + *ptr++ = key.c[1]; + *ptr++ = key.c[2]; + *ptr++ = key.c[3]; + + ptr = + StuffData(skb->data + sizeof(STRIP_Header), len, ptr, + &stuffstate); + + if (strip_info->firmware_level >= ChecksummedMessages) + ptr = add_checksum(buffer + 1, ptr); + + *ptr++ = 0x0D; + return (ptr); +} + +static void strip_send(struct strip *strip_info, struct sk_buff *skb) +{ + MetricomAddress haddr; + unsigned char *ptr = strip_info->tx_buff; + int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0; + int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0 + && !doreset; + u32 addr, brd; + + /* + * 1. If we have a packet, encapsulate it and put it in the buffer + */ + if (skb) { + char *newptr = strip_make_packet(ptr, strip_info, skb); + strip_info->tx_pps_count++; + if (!newptr) + strip_info->tx_dropped++; + else { + ptr = newptr; + strip_info->sx_pps_count++; + strip_info->tx_packets++; /* Count another successful packet */ +#ifdef EXT_COUNTERS + strip_info->tx_bytes += skb->len; + strip_info->tx_rbytes += ptr - strip_info->tx_buff; +#endif + /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */ + /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */ + } + } + + /* + * 2. If it is time for another tickle, tack it on, after the packet + */ + if (doprobe) { + StringDescriptor ts = CommandString[strip_info->next_command]; +#if TICKLE_TIMERS + { + struct timeval tv; + do_gettimeofday(&tv); + printk(KERN_INFO "**** Sending tickle string %d at %02d.%06d\n", + strip_info->next_command, tv.tv_sec % 100, + tv.tv_usec); + } +#endif + if (ptr == strip_info->tx_buff) + *ptr++ = 0x0D; + + *ptr++ = '*'; /* First send "**" to provoke an error message */ + *ptr++ = '*'; + + /* Then add the command */ + memcpy(ptr, ts.string, ts.length); + + /* Add a checksum ? */ + if (strip_info->firmware_level < ChecksummedMessages) + ptr += ts.length; + else + ptr = add_checksum(ptr, ptr + ts.length); + + *ptr++ = 0x0D; /* Terminate the command with a <CR> */ + + /* Cycle to next periodic command? */ + if (strip_info->firmware_level >= StructuredMessages) + if (++strip_info->next_command >= + ARRAY_SIZE(CommandString)) + strip_info->next_command = 0; +#ifdef EXT_COUNTERS + strip_info->tx_ebytes += ts.length; +#endif + strip_info->watchdog_doprobe = jiffies + 10 * HZ; + strip_info->watchdog_doreset = jiffies + 1 * HZ; + /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */ + } + + /* + * 3. Set up the strip_info ready to send the data (if any). + */ + strip_info->tx_head = strip_info->tx_buff; + strip_info->tx_left = ptr - strip_info->tx_buff; + strip_info->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); + + /* + * 4. Debugging check to make sure we're not overflowing the buffer. + */ + if (strip_info->tx_size - strip_info->tx_left < 20) + printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n", + strip_info->dev->name, strip_info->tx_left, + strip_info->tx_size - strip_info->tx_left); + + /* + * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in + * the buffer, strip_write_some_more will send it after the reset has finished + */ + if (doreset) { + ResetRadio(strip_info); + return; + } + + if (1) { + struct in_device *in_dev; + + brd = addr = 0; + rcu_read_lock(); + in_dev = __in_dev_get(strip_info->dev); + if (in_dev) { + if (in_dev->ifa_list) { + brd = in_dev->ifa_list->ifa_broadcast; + addr = in_dev->ifa_list->ifa_local; + } + } + rcu_read_unlock(); + } + + + /* + * 6. If it is time for a periodic ARP, queue one up to be sent. + * We only do this if: + * 1. The radio is working + * 2. It's time to send another periodic ARP + * 3. We really know what our address is (and it is not manually set to zero) + * 4. We have a designated broadcast address configured + * If we queue up an ARP packet when we don't have a designated broadcast + * address configured, then the packet will just have to be discarded in + * strip_make_packet. This is not fatal, but it causes misleading information + * to be displayed in tcpdump. tcpdump will report that periodic APRs are + * being sent, when in fact they are not, because they are all being dropped + * in the strip_make_packet routine. + */ + if (strip_info->working + && (long) jiffies - strip_info->gratuitous_arp >= 0 + && memcmp(strip_info->dev->dev_addr, zero_address.c, + sizeof(zero_address)) + && arp_query(haddr.c, brd, strip_info->dev)) { + /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n", + strip_info->dev->name, strip_info->arp_interval / HZ); */ + strip_info->gratuitous_arp = + jiffies + strip_info->arp_interval; + strip_info->arp_interval *= 2; + if (strip_info->arp_interval > MaxARPInterval) + strip_info->arp_interval = MaxARPInterval; + if (addr) + arp_send(ARPOP_REPLY, ETH_P_ARP, addr, /* Target address of ARP packet is our address */ + strip_info->dev, /* Device to send packet on */ + addr, /* Source IP address this ARP packet comes from */ + NULL, /* Destination HW address is NULL (broadcast it) */ + strip_info->dev->dev_addr, /* Source HW address is our HW address */ + strip_info->dev->dev_addr); /* Target HW address is our HW address (redundant) */ + } + + /* + * 7. All ready. Start the transmission + */ + strip_write_some_more(strip_info->tty); +} + +/* Encapsulate a datagram and kick it into a TTY queue. */ +static int strip_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct strip *strip_info = netdev_priv(dev); + + if (!netif_running(dev)) { + printk(KERN_ERR "%s: xmit call when iface is down\n", + dev->name); + return (1); + } + + netif_stop_queue(dev); + + del_timer(&strip_info->idle_timer); + + + if (jiffies - strip_info->pps_timer > HZ) { + unsigned long t = jiffies - strip_info->pps_timer; + unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t; + unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t; + unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t; + + strip_info->pps_timer = jiffies; + strip_info->rx_pps_count = 0; + strip_info->tx_pps_count = 0; + strip_info->sx_pps_count = 0; + + strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2; + strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2; + strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2; + + if (rx_pps_count / 8 >= 10) + printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n", + strip_info->dev->name, rx_pps_count / 8); + if (tx_pps_count / 8 >= 10) + printk(KERN_INFO "%s: WARNING: Tx %ld packets per second.\n", + strip_info->dev->name, tx_pps_count / 8); + if (sx_pps_count / 8 >= 10) + printk(KERN_INFO "%s: WARNING: Sending %ld packets per second.\n", + strip_info->dev->name, sx_pps_count / 8); + } + + spin_lock_bh(&strip_lock); + + strip_send(strip_info, skb); + + spin_unlock_bh(&strip_lock); + + if (skb) + dev_kfree_skb(skb); + return 0; +} + +/* + * IdleTask periodically calls strip_xmit, so even when we have no IP packets + * to send for an extended period of time, the watchdog processing still gets + * done to ensure that the radio stays in Starmode + */ + +static void strip_IdleTask(unsigned long parameter) +{ + strip_xmit(NULL, (struct net_device *) parameter); +} + +/* + * Create the MAC header for an arbitrary protocol layer + * + * saddr!=NULL means use this specific address (n/a for Metricom) + * saddr==NULL means use default device source address + * daddr!=NULL means use this destination address + * daddr==NULL means leave destination address alone + * (e.g. unresolved arp -- kernel will call + * rebuild_header later to fill in the address) + */ + +static int strip_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, void *daddr, void *saddr, + unsigned len) +{ + struct strip *strip_info = netdev_priv(dev); + STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header)); + + /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type, + type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */ + + header->src_addr = strip_info->true_dev_addr; + header->protocol = htons(type); + + /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */ + + if (!daddr) + return (-dev->hard_header_len); + + header->dst_addr = *(MetricomAddress *) daddr; + return (dev->hard_header_len); +} + +/* + * Rebuild the MAC header. This is called after an ARP + * (or in future other address resolution) has completed on this + * sk_buff. We now let ARP fill in the other fields. + * I think this should return zero if packet is ready to send, + * or non-zero if it needs more time to do an address lookup + */ + +static int strip_rebuild_header(struct sk_buff *skb) +{ +#ifdef CONFIG_INET + STRIP_Header *header = (STRIP_Header *) skb->data; + + /* Arp find returns zero if if knows the address, */ + /* or if it doesn't know the address it sends an ARP packet and returns non-zero */ + return arp_find(header->dst_addr.c, skb) ? 1 : 0; +#else + return 0; +#endif +} + + +/************************************************************************/ +/* Receiving routines */ + +static int strip_receive_room(struct tty_struct *tty) +{ + return 0x10000; /* We can handle an infinite amount of data. :-) */ +} + +/* + * This function parses the response to the ATS300? command, + * extracting the radio version and serial number. + */ +static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end) +{ + __u8 *p, *value_begin, *value_end; + int len; + + /* Determine the beginning of the second line of the payload */ + p = ptr; + while (p < end && *p != 10) + p++; + if (p >= end) + return; + p++; + value_begin = p; + + /* Determine the end of line */ + while (p < end && *p != 10) + p++; + if (p >= end) + return; + value_end = p; + p++; + + len = value_end - value_begin; + len = min_t(int, len, sizeof(FirmwareVersion) - 1); + if (strip_info->firmware_version.c[0] == 0) + printk(KERN_INFO "%s: Radio Firmware: %.*s\n", + strip_info->dev->name, len, value_begin); + sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin); + + /* Look for the first colon */ + while (p < end && *p != ':') + p++; + if (p >= end) + return; + /* Skip over the space */ + p += 2; + len = sizeof(SerialNumber) - 1; + if (p + len <= end) { + sprintf(strip_info->serial_number.c, "%.*s", len, p); + } else { + printk(KERN_DEBUG + "STRIP: radio serial number shorter (%zd) than expected (%d)\n", + end - p, len); + } +} + +/* + * This function parses the response to the ATS325? command, + * extracting the radio battery voltage. + */ +static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end) +{ + int len; + + len = sizeof(BatteryVoltage) - 1; + if (ptr + len <= end) { + sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr); + } else { + printk(KERN_DEBUG + "STRIP: radio voltage string shorter (%zd) than expected (%d)\n", + end - ptr, len); + } +} + +/* + * This function parses the responses to the AT~LA and ATS311 commands, + * which list the radio's neighbours. + */ +static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end) +{ + table->num_nodes = 0; + while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) { + MetricomNode *node = &table->node[table->num_nodes++]; + char *dst = node->c, *limit = dst + sizeof(*node) - 1; + while (ptr < end && *ptr <= 32) + ptr++; + while (ptr < end && dst < limit && *ptr != 10) + *dst++ = *ptr++; + *dst++ = 0; + while (ptr < end && ptr[-1] != 10) + ptr++; + } + do_gettimeofday(&table->timestamp); +} + +static int get_radio_address(struct strip *strip_info, __u8 * p) +{ + MetricomAddress addr; + + if (string_to_radio_address(&addr, p)) + return (1); + + /* See if our radio address has changed */ + if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) { + MetricomAddressString addr_string; + radio_address_to_string(&addr, &addr_string); + printk(KERN_INFO "%s: Radio address = %s\n", + strip_info->dev->name, addr_string.c); + strip_info->true_dev_addr = addr; + if (!strip_info->manual_dev_addr) + *(MetricomAddress *) strip_info->dev->dev_addr = + addr; + /* Give the radio a few seconds to get its head straight, then send an arp */ + strip_info->gratuitous_arp = jiffies + 15 * HZ; + strip_info->arp_interval = 1 * HZ; + } + return (0); +} + +static int verify_checksum(struct strip *strip_info) +{ + __u8 *p = strip_info->sx_buff; + __u8 *end = strip_info->sx_buff + strip_info->sx_count - 4; + u_short sum = + (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) | + (READHEX16(end[2]) << 4) | (READHEX16(end[3])); + while (p < end) + sum -= *p++; + if (sum == 0 && strip_info->firmware_level == StructuredMessages) { + strip_info->firmware_level = ChecksummedMessages; + printk(KERN_INFO "%s: Radio provides message checksums\n", + strip_info->dev->name); + } + return (sum == 0); +} + +static void RecvErr(char *msg, struct strip *strip_info) +{ + __u8 *ptr = strip_info->sx_buff; + __u8 *end = strip_info->sx_buff + strip_info->sx_count; + DumpData(msg, strip_info, ptr, end); + strip_info->rx_errors++; +} + +static void RecvErr_Message(struct strip *strip_info, __u8 * sendername, + const __u8 * msg, u_long len) +{ + if (has_prefix(msg, len, "001")) { /* Not in StarMode! */ + RecvErr("Error Msg:", strip_info); + printk(KERN_INFO "%s: Radio %s is not in StarMode\n", + strip_info->dev->name, sendername); + } + + else if (has_prefix(msg, len, "002")) { /* Remap handle */ + /* We ignore "Remap handle" messages for now */ + } + + else if (has_prefix(msg, len, "003")) { /* Can't resolve name */ + RecvErr("Error Msg:", strip_info); + printk(KERN_INFO "%s: Destination radio name is unknown\n", + strip_info->dev->name); + } + + else if (has_prefix(msg, len, "004")) { /* Name too small or missing */ + strip_info->watchdog_doreset = jiffies + LongTime; +#if TICKLE_TIMERS + { + struct timeval tv; + do_gettimeofday(&tv); + printk(KERN_INFO + "**** Got ERR_004 response at %02d.%06d\n", + tv.tv_sec % 100, tv.tv_usec); + } +#endif + if (!strip_info->working) { + strip_info->working = TRUE; + printk(KERN_INFO "%s: Radio now in starmode\n", + strip_info->dev->name); + /* + * If the radio has just entered a working state, we should do our first + * probe ASAP, so that we find out our radio address etc. without delay. + */ + strip_info->watchdog_doprobe = jiffies; + } + if (strip_info->firmware_level == NoStructure && sendername) { + strip_info->firmware_level = StructuredMessages; + strip_info->next_command = 0; /* Try to enable checksums ASAP */ + printk(KERN_INFO + "%s: Radio provides structured messages\n", + strip_info->dev->name); + } + if (strip_info->firmware_level >= StructuredMessages) { + /* + * If this message has a valid checksum on the end, then the call to verify_checksum + * will elevate the firmware_level to ChecksummedMessages for us. (The actual return + * code from verify_checksum is ignored here.) + */ + verify_checksum(strip_info); + /* + * If the radio has structured messages but we don't yet have all our information about it, + * we should do probes without delay, until we have gathered all the information + */ + if (!GOT_ALL_RADIO_INFO(strip_info)) + strip_info->watchdog_doprobe = jiffies; + } + } + + else if (has_prefix(msg, len, "005")) /* Bad count specification */ + RecvErr("Error Msg:", strip_info); + + else if (has_prefix(msg, len, "006")) /* Header too big */ + RecvErr("Error Msg:", strip_info); + + else if (has_prefix(msg, len, "007")) { /* Body too big */ + RecvErr("Error Msg:", strip_info); + printk(KERN_ERR + "%s: Error! Packet size too big for radio.\n", + strip_info->dev->name); + } + + else if (has_prefix(msg, len, "008")) { /* Bad character in name */ + RecvErr("Error Msg:", strip_info); + printk(KERN_ERR + "%s: Radio name contains illegal character\n", + strip_info->dev->name); + } + + else if (has_prefix(msg, len, "009")) /* No count or line terminator */ + RecvErr("Error Msg:", strip_info); + + else if (has_prefix(msg, len, "010")) /* Invalid checksum */ + RecvErr("Error Msg:", strip_info); + + else if (has_prefix(msg, len, "011")) /* Checksum didn't match */ + RecvErr("Error Msg:", strip_info); + + else if (has_prefix(msg, len, "012")) /* Failed to transmit packet */ + RecvErr("Error Msg:", strip_info); + + else + RecvErr("Error Msg:", strip_info); +} + +static void process_AT_response(struct strip *strip_info, __u8 * ptr, + __u8 * end) +{ + u_long len; + __u8 *p = ptr; + while (p < end && p[-1] != 10) + p++; /* Skip past first newline character */ + /* Now ptr points to the AT command, and p points to the text of the response. */ + len = p - ptr; + +#if TICKLE_TIMERS + { + struct timeval tv; + do_gettimeofday(&tv); + printk(KERN_INFO "**** Got AT response %.7s at %02d.%06d\n", + ptr, tv.tv_sec % 100, tv.tv_usec); + } +#endif + + if (has_prefix(ptr, len, "ATS300?")) + get_radio_version(strip_info, p, end); + else if (has_prefix(ptr, len, "ATS305?")) + get_radio_address(strip_info, p); + else if (has_prefix(ptr, len, "ATS311?")) + get_radio_neighbours(&strip_info->poletops, p, end); + else if (has_prefix(ptr, len, "ATS319=7")) + verify_checksum(strip_info); + else if (has_prefix(ptr, len, "ATS325?")) + get_radio_voltage(strip_info, p, end); + else if (has_prefix(ptr, len, "AT~LA")) + get_radio_neighbours(&strip_info->portables, p, end); + else + RecvErr("Unknown AT Response:", strip_info); +} + +static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end) +{ + /* Currently we don't do anything with ACKs from the radio */ +} + +static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end) +{ + if (ptr + 16 > end) + RecvErr("Bad Info Msg:", strip_info); +} + +static struct net_device *get_strip_dev(struct strip *strip_info) +{ + /* If our hardware address is *manually set* to zero, and we know our */ + /* real radio hardware address, try to find another strip device that has been */ + /* manually set to that address that we can 'transfer ownership' of this packet to */ + if (strip_info->manual_dev_addr && + !memcmp(strip_info->dev->dev_addr, zero_address.c, + sizeof(zero_address)) + && memcmp(&strip_info->true_dev_addr, zero_address.c, + sizeof(zero_address))) { + struct net_device *dev; + read_lock_bh(&dev_base_lock); + dev = dev_base; + while (dev) { + if (dev->type == strip_info->dev->type && + !memcmp(dev->dev_addr, + &strip_info->true_dev_addr, + sizeof(MetricomAddress))) { + printk(KERN_INFO + "%s: Transferred packet ownership to %s.\n", + strip_info->dev->name, dev->name); + read_unlock_bh(&dev_base_lock); + return (dev); + } + dev = dev->next; + } + read_unlock_bh(&dev_base_lock); + } + return (strip_info->dev); +} + +/* + * Send one completely decapsulated datagram to the next layer. + */ + +static void deliver_packet(struct strip *strip_info, STRIP_Header * header, + __u16 packetlen) +{ + struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen); + if (!skb) { + printk(KERN_ERR "%s: memory squeeze, dropping packet.\n", + strip_info->dev->name); + strip_info->rx_dropped++; + } else { + memcpy(skb_put(skb, sizeof(STRIP_Header)), header, + sizeof(STRIP_Header)); + memcpy(skb_put(skb, packetlen), strip_info->rx_buff, + packetlen); + skb->dev = get_strip_dev(strip_info); + skb->protocol = header->protocol; + skb->mac.raw = skb->data; + + /* Having put a fake header on the front of the sk_buff for the */ + /* benefit of tools like tcpdump, skb_pull now 'consumes' that */ + /* fake header before we hand the packet up to the next layer. */ + skb_pull(skb, sizeof(STRIP_Header)); + + /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */ + strip_info->rx_packets++; + strip_info->rx_pps_count++; +#ifdef EXT_COUNTERS + strip_info->rx_bytes += packetlen; +#endif + skb->dev->last_rx = jiffies; + netif_rx(skb); + } +} + +static void process_IP_packet(struct strip *strip_info, + STRIP_Header * header, __u8 * ptr, + __u8 * end) +{ + __u16 packetlen; + + /* Decode start of the IP packet header */ + ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4); + if (!ptr) { + RecvErr("IP Packet too short", strip_info); + return; + } + + packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3]; + + if (packetlen > MAX_RECV_MTU) { + printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n", + strip_info->dev->name, packetlen); + strip_info->rx_dropped++; + return; + } + + /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */ + + /* Decode remainder of the IP packet */ + ptr = + UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4); + if (!ptr) { + RecvErr("IP Packet too short", strip_info); + return; + } + + if (ptr < end) { + RecvErr("IP Packet too long", strip_info); + return; + } + + header->protocol = htons(ETH_P_IP); + + deliver_packet(strip_info, header, packetlen); +} + +static void process_ARP_packet(struct strip *strip_info, + STRIP_Header * header, __u8 * ptr, + __u8 * end) +{ + __u16 packetlen; + struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff; + + /* Decode start of the ARP packet */ + ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8); + if (!ptr) { + RecvErr("ARP Packet too short", strip_info); + return; + } + + packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2; + + if (packetlen > MAX_RECV_MTU) { + printk(KERN_INFO + "%s: Dropping oversized received ARP packet: %d bytes\n", + strip_info->dev->name, packetlen); + strip_info->rx_dropped++; + return; + } + + /*printk(KERN_INFO "%s: Got %d byte ARP %s\n", + strip_info->dev->name, packetlen, + ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */ + + /* Decode remainder of the ARP packet */ + ptr = + UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8); + if (!ptr) { + RecvErr("ARP Packet too short", strip_info); + return; + } + + if (ptr < end) { + RecvErr("ARP Packet too long", strip_info); + return; + } + + header->protocol = htons(ETH_P_ARP); + + deliver_packet(strip_info, header, packetlen); +} + +/* + * process_text_message processes a <CR>-terminated block of data received + * from the radio that doesn't begin with a '*' character. All normal + * Starmode communication messages with the radio begin with a '*', + * so any text that does not indicates a serial port error, a radio that + * is in Hayes command mode instead of Starmode, or a radio with really + * old firmware that doesn't frame its Starmode responses properly. + */ +static void process_text_message(struct strip *strip_info) +{ + __u8 *msg = strip_info->sx_buff; + int len = strip_info->sx_count; + + /* Check for anything that looks like it might be our radio name */ + /* (This is here for backwards compatibility with old firmware) */ + if (len == 9 && get_radio_address(strip_info, msg) == 0) + return; + + if (text_equal(msg, len, "OK")) + return; /* Ignore 'OK' responses from prior commands */ + if (text_equal(msg, len, "ERROR")) + return; /* Ignore 'ERROR' messages */ + if (has_prefix(msg, len, "ate0q1")) + return; /* Ignore character echo back from the radio */ + + /* Catch other error messages */ + /* (This is here for backwards compatibility with old firmware) */ + if (has_prefix(msg, len, "ERR_")) { + RecvErr_Message(strip_info, NULL, &msg[4], len - 4); + return; + } + + RecvErr("No initial *", strip_info); +} + +/* + * process_message processes a <CR>-terminated block of data received + * from the radio. If the radio is not in Starmode or has old firmware, + * it may be a line of text in response to an AT command. Ideally, with + * a current radio that's properly in Starmode, all data received should + * be properly framed and checksummed radio message blocks, containing + * either a starmode packet, or a other communication from the radio + * firmware, like "INF_" Info messages and &COMMAND responses. + */ +static void process_message(struct strip *strip_info) +{ + STRIP_Header header = { zero_address, zero_address, 0 }; + __u8 *ptr = strip_info->sx_buff; + __u8 *end = strip_info->sx_buff + strip_info->sx_count; + __u8 sendername[32], *sptr = sendername; + MetricomKey key; + + /*HexDump("Receiving", strip_info, ptr, end); */ + + /* Check for start of address marker, and then skip over it */ + if (*ptr == '*') + ptr++; + else { + process_text_message(strip_info); + return; + } + + /* Copy out the return address */ + while (ptr < end && *ptr != '*' + && sptr < ARRAY_END(sendername) - 1) + *sptr++ = *ptr++; + *sptr = 0; /* Null terminate the sender name */ + + /* Check for end of address marker, and skip over it */ + if (ptr >= end || *ptr != '*') { + RecvErr("No second *", strip_info); + return; + } + ptr++; /* Skip the second '*' */ + + /* If the sender name is "&COMMAND", ignore this 'packet' */ + /* (This is here for backwards compatibility with old firmware) */ + if (!strcmp(sendername, "&COMMAND")) { + strip_info->firmware_level = NoStructure; + strip_info->next_command = CompatibilityCommand; + return; + } + + if (ptr + 4 > end) { + RecvErr("No proto key", strip_info); + return; + } + + /* Get the protocol key out of the buffer */ + key.c[0] = *ptr++; + key.c[1] = *ptr++; + key.c[2] = *ptr++; + key.c[3] = *ptr++; + + /* If we're using checksums, verify the checksum at the end of the packet */ + if (strip_info->firmware_level >= ChecksummedMessages) { + end -= 4; /* Chop the last four bytes off the packet (they're the checksum) */ + if (ptr > end) { + RecvErr("Missing Checksum", strip_info); + return; + } + if (!verify_checksum(strip_info)) { + RecvErr("Bad Checksum", strip_info); + return; + } + } + + /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */ + + /* + * Fill in (pseudo) source and destination addresses in the packet. + * We assume that the destination address was our address (the radio does not + * tell us this). If the radio supplies a source address, then we use it. + */ + header.dst_addr = strip_info->true_dev_addr; + string_to_radio_address(&header.src_addr, sendername); + +#ifdef EXT_COUNTERS + if (key.l == SIP0Key.l) { + strip_info->rx_rbytes += (end - ptr); + process_IP_packet(strip_info, &header, ptr, end); + } else if (key.l == ARP0Key.l) { + strip_info->rx_rbytes += (end - ptr); + process_ARP_packet(strip_info, &header, ptr, end); + } else if (key.l == ATR_Key.l) { + strip_info->rx_ebytes += (end - ptr); + process_AT_response(strip_info, ptr, end); + } else if (key.l == ACK_Key.l) { + strip_info->rx_ebytes += (end - ptr); + process_ACK(strip_info, ptr, end); + } else if (key.l == INF_Key.l) { + strip_info->rx_ebytes += (end - ptr); + process_Info(strip_info, ptr, end); + } else if (key.l == ERR_Key.l) { + strip_info->rx_ebytes += (end - ptr); + RecvErr_Message(strip_info, sendername, ptr, end - ptr); + } else + RecvErr("Unrecognized protocol key", strip_info); +#else + if (key.l == SIP0Key.l) + process_IP_packet(strip_info, &header, ptr, end); + else if (key.l == ARP0Key.l) + process_ARP_packet(strip_info, &header, ptr, end); + else if (key.l == ATR_Key.l) + process_AT_response(strip_info, ptr, end); + else if (key.l == ACK_Key.l) + process_ACK(strip_info, ptr, end); + else if (key.l == INF_Key.l) + process_Info(strip_info, ptr, end); + else if (key.l == ERR_Key.l) + RecvErr_Message(strip_info, sendername, ptr, end - ptr); + else + RecvErr("Unrecognized protocol key", strip_info); +#endif +} + +#define TTYERROR(X) ((X) == TTY_BREAK ? "Break" : \ + (X) == TTY_FRAME ? "Framing Error" : \ + (X) == TTY_PARITY ? "Parity Error" : \ + (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error") + +/* + * Handle the 'receiver data ready' interrupt. + * This function is called by the 'tty_io' module in the kernel when + * a block of STRIP data has been received, which can now be decapsulated + * and sent on to some IP layer for further processing. + */ + +static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct strip *strip_info = (struct strip *) tty->disc_data; + const unsigned char *end = cp + count; + + if (!strip_info || strip_info->magic != STRIP_MAGIC + || !netif_running(strip_info->dev)) + return; + + spin_lock_bh(&strip_lock); +#if 0 + { + struct timeval tv; + do_gettimeofday(&tv); + printk(KERN_INFO + "**** strip_receive_buf: %3d bytes at %02d.%06d\n", + count, tv.tv_sec % 100, tv.tv_usec); + } +#endif + +#ifdef EXT_COUNTERS + strip_info->rx_sbytes += count; +#endif + + /* Read the characters out of the buffer */ + while (cp < end) { + if (fp && *fp) + printk(KERN_INFO "%s: %s on serial port\n", + strip_info->dev->name, TTYERROR(*fp)); + if (fp && *fp++ && !strip_info->discard) { /* If there's a serial error, record it */ + /* If we have some characters in the buffer, discard them */ + strip_info->discard = strip_info->sx_count; + strip_info->rx_errors++; + } + + /* Leading control characters (CR, NL, Tab, etc.) are ignored */ + if (strip_info->sx_count > 0 || *cp >= ' ') { + if (*cp == 0x0D) { /* If end of packet, decide what to do with it */ + if (strip_info->sx_count > 3000) + printk(KERN_INFO + "%s: Cut a %d byte packet (%zd bytes remaining)%s\n", + strip_info->dev->name, + strip_info->sx_count, + end - cp - 1, + strip_info-> + discard ? " (discarded)" : + ""); + if (strip_info->sx_count > + strip_info->sx_size) { + strip_info->rx_over_errors++; + printk(KERN_INFO + "%s: sx_buff overflow (%d bytes total)\n", + strip_info->dev->name, + strip_info->sx_count); + } else if (strip_info->discard) + printk(KERN_INFO + "%s: Discarding bad packet (%d/%d)\n", + strip_info->dev->name, + strip_info->discard, + strip_info->sx_count); + else + process_message(strip_info); + strip_info->discard = 0; + strip_info->sx_count = 0; + } else { + /* Make sure we have space in the buffer */ + if (strip_info->sx_count < + strip_info->sx_size) + strip_info->sx_buff[strip_info-> + sx_count] = + *cp; + strip_info->sx_count++; + } + } + cp++; + } + spin_unlock_bh(&strip_lock); +} + + +/************************************************************************/ +/* General control routines */ + +static int set_mac_address(struct strip *strip_info, + MetricomAddress * addr) +{ + /* + * We're using a manually specified address if the address is set + * to anything other than all ones. Setting the address to all ones + * disables manual mode and goes back to automatic address determination + * (tracking the true address that the radio has). + */ + strip_info->manual_dev_addr = + memcmp(addr->c, broadcast_address.c, + sizeof(broadcast_address)); + if (strip_info->manual_dev_addr) + *(MetricomAddress *) strip_info->dev->dev_addr = *addr; + else + *(MetricomAddress *) strip_info->dev->dev_addr = + strip_info->true_dev_addr; + return 0; +} + +static int strip_set_mac_address(struct net_device *dev, void *addr) +{ + struct strip *strip_info = netdev_priv(dev); + struct sockaddr *sa = addr; + printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name); + set_mac_address(strip_info, (MetricomAddress *) sa->sa_data); + return 0; +} + +static struct net_device_stats *strip_get_stats(struct net_device *dev) +{ + struct strip *strip_info = netdev_priv(dev); + static struct net_device_stats stats; + + memset(&stats, 0, sizeof(struct net_device_stats)); + + stats.rx_packets = strip_info->rx_packets; + stats.tx_packets = strip_info->tx_packets; + stats.rx_dropped = strip_info->rx_dropped; + stats.tx_dropped = strip_info->tx_dropped; + stats.tx_errors = strip_info->tx_errors; + stats.rx_errors = strip_info->rx_errors; + stats.rx_over_errors = strip_info->rx_over_errors; + return (&stats); +} + + +/************************************************************************/ +/* Opening and closing */ + +/* + * Here's the order things happen: + * When the user runs "slattach -p strip ..." + * 1. The TTY module calls strip_open + * 2. strip_open calls strip_alloc + * 3. strip_alloc calls register_netdev + * 4. register_netdev calls strip_dev_init + * 5. then strip_open finishes setting up the strip_info + * + * When the user runs "ifconfig st<x> up address netmask ..." + * 6. strip_open_low gets called + * + * When the user runs "ifconfig st<x> down" + * 7. strip_close_low gets called + * + * When the user kills the slattach process + * 8. strip_close gets called + * 9. strip_close calls dev_close + * 10. if the device is still up, then dev_close calls strip_close_low + * 11. strip_close calls strip_free + */ + +/* Open the low-level part of the STRIP channel. Easy! */ + +static int strip_open_low(struct net_device *dev) +{ + struct strip *strip_info = netdev_priv(dev); + + if (strip_info->tty == NULL) + return (-ENODEV); + + if (!allocate_buffers(strip_info, dev->mtu)) + return (-ENOMEM); + + strip_info->sx_count = 0; + strip_info->tx_left = 0; + + strip_info->discard = 0; + strip_info->working = FALSE; + strip_info->firmware_level = NoStructure; + strip_info->next_command = CompatibilityCommand; + strip_info->user_baud = get_baud(strip_info->tty); + + printk(KERN_INFO "%s: Initializing Radio.\n", + strip_info->dev->name); + ResetRadio(strip_info); + strip_info->idle_timer.expires = jiffies + 1 * HZ; + add_timer(&strip_info->idle_timer); + netif_wake_queue(dev); + return (0); +} + + +/* + * Close the low-level part of the STRIP channel. Easy! + */ + +static int strip_close_low(struct net_device *dev) +{ + struct strip *strip_info = netdev_priv(dev); + + if (strip_info->tty == NULL) + return -EBUSY; + strip_info->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); + + netif_stop_queue(dev); + + /* + * Free all STRIP frame buffers. + */ + if (strip_info->rx_buff) { + kfree(strip_info->rx_buff); + strip_info->rx_buff = NULL; + } + if (strip_info->sx_buff) { + kfree(strip_info->sx_buff); + strip_info->sx_buff = NULL; + } + if (strip_info->tx_buff) { + kfree(strip_info->tx_buff); + strip_info->tx_buff = NULL; + } + del_timer(&strip_info->idle_timer); + return 0; +} + +/* + * This routine is called by DDI when the + * (dynamically assigned) device is registered + */ + +static void strip_dev_setup(struct net_device *dev) +{ + /* + * Finish setting up the DEVICE info. + */ + + SET_MODULE_OWNER(dev); + + dev->trans_start = 0; + dev->last_rx = 0; + dev->tx_queue_len = 30; /* Drop after 30 frames queued */ + + dev->flags = 0; + dev->mtu = DEFAULT_STRIP_MTU; + dev->type = ARPHRD_METRICOM; /* dtang */ + dev->hard_header_len = sizeof(STRIP_Header); + /* + * dev->priv Already holds a pointer to our struct strip + */ + + *(MetricomAddress *) & dev->broadcast = broadcast_address; + dev->dev_addr[0] = 0; + dev->addr_len = sizeof(MetricomAddress); + + /* + * Pointers to interface service routines. + */ + + dev->open = strip_open_low; + dev->stop = strip_close_low; + dev->hard_start_xmit = strip_xmit; + dev->hard_header = strip_header; + dev->rebuild_header = strip_rebuild_header; + dev->set_mac_address = strip_set_mac_address; + dev->get_stats = strip_get_stats; + dev->change_mtu = strip_change_mtu; +} + +/* + * Free a STRIP channel. + */ + +static void strip_free(struct strip *strip_info) +{ + spin_lock_bh(&strip_lock); + list_del_rcu(&strip_info->list); + spin_unlock_bh(&strip_lock); + + strip_info->magic = 0; + + free_netdev(strip_info->dev); +} + + +/* + * Allocate a new free STRIP channel + */ +static struct strip *strip_alloc(void) +{ + struct list_head *n; + struct net_device *dev; + struct strip *strip_info; + + dev = alloc_netdev(sizeof(struct strip), "st%d", + strip_dev_setup); + + if (!dev) + return NULL; /* If no more memory, return */ + + + strip_info = dev->priv; + strip_info->dev = dev; + + strip_info->magic = STRIP_MAGIC; + strip_info->tty = NULL; + + strip_info->gratuitous_arp = jiffies + LongTime; + strip_info->arp_interval = 0; + init_timer(&strip_info->idle_timer); + strip_info->idle_timer.data = (long) dev; + strip_info->idle_timer.function = strip_IdleTask; + + + spin_lock_bh(&strip_lock); + rescan: + /* + * Search the list to find where to put our new entry + * (and in the process decide what channel number it is + * going to be) + */ + list_for_each(n, &strip_list) { + struct strip *s = hlist_entry(n, struct strip, list); + + if (s->dev->base_addr == dev->base_addr) { + ++dev->base_addr; + goto rescan; + } + } + + sprintf(dev->name, "st%ld", dev->base_addr); + + list_add_tail_rcu(&strip_info->list, &strip_list); + spin_unlock_bh(&strip_lock); + + return strip_info; +} + +/* + * Open the high-level part of the STRIP channel. + * This function is called by the TTY module when the + * STRIP line discipline is called for. Because we are + * sure the tty line exists, we only have to link it to + * a free STRIP channel... + */ + +static int strip_open(struct tty_struct *tty) +{ + struct strip *strip_info = (struct strip *) tty->disc_data; + + /* + * First make sure we're not already connected. + */ + + if (strip_info && strip_info->magic == STRIP_MAGIC) + return -EEXIST; + + /* + * OK. Find a free STRIP channel to use. + */ + if ((strip_info = strip_alloc()) == NULL) + return -ENFILE; + + /* + * Register our newly created device so it can be ifconfig'd + * strip_dev_init() will be called as a side-effect + */ + + if (register_netdev(strip_info->dev) != 0) { + printk(KERN_ERR "strip: register_netdev() failed.\n"); + strip_free(strip_info); + return -ENFILE; + } + + strip_info->tty = tty; + tty->disc_data = strip_info; + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + + /* + * Restore default settings + */ + + strip_info->dev->type = ARPHRD_METRICOM; /* dtang */ + + /* + * Set tty options + */ + + tty->termios->c_iflag |= IGNBRK | IGNPAR; /* Ignore breaks and parity errors. */ + tty->termios->c_cflag |= CLOCAL; /* Ignore modem control signals. */ + tty->termios->c_cflag &= ~HUPCL; /* Don't close on hup */ + + printk(KERN_INFO "STRIP: device \"%s\" activated\n", + strip_info->dev->name); + + /* + * Done. We have linked the TTY line to a channel. + */ + return (strip_info->dev->base_addr); +} + +/* + * Close down a STRIP channel. + * This means flushing out any pending queues, and then restoring the + * TTY line discipline to what it was before it got hooked to STRIP + * (which usually is TTY again). + */ + +static void strip_close(struct tty_struct *tty) +{ + struct strip *strip_info = (struct strip *) tty->disc_data; + + /* + * First make sure we're connected. + */ + + if (!strip_info || strip_info->magic != STRIP_MAGIC) + return; + + unregister_netdev(strip_info->dev); + + tty->disc_data = NULL; + strip_info->tty = NULL; + printk(KERN_INFO "STRIP: device \"%s\" closed down\n", + strip_info->dev->name); + strip_free(strip_info); + tty->disc_data = NULL; +} + + +/************************************************************************/ +/* Perform I/O control calls on an active STRIP channel. */ + +static int strip_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct strip *strip_info = (struct strip *) tty->disc_data; + + /* + * First make sure we're connected. + */ + + if (!strip_info || strip_info->magic != STRIP_MAGIC) + return -EINVAL; + + switch (cmd) { + case SIOCGIFNAME: + if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1)) + return -EFAULT; + break; + case SIOCSIFHWADDR: + { + MetricomAddress addr; + //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name); + if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress))) + return -EFAULT; + return set_mac_address(strip_info, &addr); + } + /* + * Allow stty to read, but not set, the serial port + */ + + case TCGETS: + case TCGETA: + return n_tty_ioctl(tty, file, cmd, arg); + break; + default: + return -ENOIOCTLCMD; + break; + } + return 0; +} + + +/************************************************************************/ +/* Initialization */ + +static struct tty_ldisc strip_ldisc = { + .magic = TTY_LDISC_MAGIC, + .name = "strip", + .owner = THIS_MODULE, + .open = strip_open, + .close = strip_close, + .ioctl = strip_ioctl, + .receive_buf = strip_receive_buf, + .receive_room = strip_receive_room, + .write_wakeup = strip_write_some_more, +}; + +/* + * Initialize the STRIP driver. + * This routine is called at boot time, to bootstrap the multi-channel + * STRIP driver + */ + +static char signon[] __initdata = + KERN_INFO "STRIP: Version %s (unlimited channels)\n"; + +static int __init strip_init_driver(void) +{ + int status; + + printk(signon, StripVersion); + + + /* + * Fill in our line protocol discipline, and register it + */ + if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc))) + printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n", + status); + + /* + * Register the status file with /proc + */ + proc_net_fops_create("strip", S_IFREG | S_IRUGO, &strip_seq_fops); + + return status; +} + +module_init(strip_init_driver); + +static const char signoff[] __exitdata = + KERN_INFO "STRIP: Module Unloaded\n"; + +static void __exit strip_exit_driver(void) +{ + int i; + struct list_head *p,*n; + + /* module ref count rules assure that all entries are unregistered */ + list_for_each_safe(p, n, &strip_list) { + struct strip *s = list_entry(p, struct strip, list); + strip_free(s); + } + + /* Unregister with the /proc/net file here. */ + proc_net_remove("strip"); + + if ((i = tty_register_ldisc(N_STRIP, NULL))) + printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i); + + printk(signoff); +} + +module_exit(strip_exit_driver); + +MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>"); +MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver"); +MODULE_LICENSE("Dual BSD/GPL"); + +MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem"); diff --git a/drivers/net/wireless/todo.txt b/drivers/net/wireless/todo.txt new file mode 100644 index 00000000000..32234018de7 --- /dev/null +++ b/drivers/net/wireless/todo.txt @@ -0,0 +1,15 @@ + Wireless Todo + ------------- + +1) Bring other kernel Wireless LAN drivers here + Completed + +2) Bring new Wireless LAN driver not yet in the kernel there + See my web page for details + In particular : HostAP + +3) Misc + o Mark wavelan, wavelan_cs, netwave_cs drivers as obsolete + o Maybe arlan.c, ray_cs.c and strip.c also deserve to be obsolete + + Jean II diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c new file mode 100644 index 00000000000..7a5e20a1789 --- /dev/null +++ b/drivers/net/wireless/wavelan.c @@ -0,0 +1,4452 @@ +/* + * WaveLAN ISA driver + * + * Jean II - HPLB '96 + * + * Reorganisation and extension of the driver. + * Original copyright follows (also see the end of this file). + * See wavelan.p.h for details. + * + * + * + * AT&T GIS (nee NCR) WaveLAN card: + * An Ethernet-like radio transceiver + * controlled by an Intel 82586 coprocessor. + */ + +#include "wavelan.p.h" /* Private header */ + +/************************* MISC SUBROUTINES **************************/ +/* + * Subroutines which won't fit in one of the following category + * (WaveLAN modem or i82586) + */ + +/*------------------------------------------------------------------*/ +/* + * Translate irq number to PSA irq parameter + */ +static u8 wv_irq_to_psa(int irq) +{ + if (irq < 0 || irq >= NELS(irqvals)) + return 0; + + return irqvals[irq]; +} + +/*------------------------------------------------------------------*/ +/* + * Translate PSA irq parameter to irq number + */ +static int __init wv_psa_to_irq(u8 irqval) +{ + int irq; + + for (irq = 0; irq < NELS(irqvals); irq++) + if (irqvals[irq] == irqval) + return irq; + + return -1; +} + +#ifdef STRUCT_CHECK +/*------------------------------------------------------------------*/ +/* + * Sanity routine to verify the sizes of the various WaveLAN interface + * structures. + */ +static char *wv_struct_check(void) +{ +#define SC(t,s,n) if (sizeof(t) != s) return(n); + + SC(psa_t, PSA_SIZE, "psa_t"); + SC(mmw_t, MMW_SIZE, "mmw_t"); + SC(mmr_t, MMR_SIZE, "mmr_t"); + SC(ha_t, HA_SIZE, "ha_t"); + +#undef SC + + return ((char *) NULL); +} /* wv_struct_check */ +#endif /* STRUCT_CHECK */ + +/********************* HOST ADAPTER SUBROUTINES *********************/ +/* + * Useful subroutines to manage the WaveLAN ISA interface + * + * One major difference with the PCMCIA hardware (except the port mapping) + * is that we have to keep the state of the Host Control Register + * because of the interrupt enable & bus size flags. + */ + +/*------------------------------------------------------------------*/ +/* + * Read from card's Host Adaptor Status Register. + */ +static inline u16 hasr_read(unsigned long ioaddr) +{ + return (inw(HASR(ioaddr))); +} /* hasr_read */ + +/*------------------------------------------------------------------*/ +/* + * Write to card's Host Adapter Command Register. + */ +static inline void hacr_write(unsigned long ioaddr, u16 hacr) +{ + outw(hacr, HACR(ioaddr)); +} /* hacr_write */ + +/*------------------------------------------------------------------*/ +/* + * Write to card's Host Adapter Command Register. Include a delay for + * those times when it is needed. + */ +static inline void hacr_write_slow(unsigned long ioaddr, u16 hacr) +{ + hacr_write(ioaddr, hacr); + /* delay might only be needed sometimes */ + mdelay(1); +} /* hacr_write_slow */ + +/*------------------------------------------------------------------*/ +/* + * Set the channel attention bit. + */ +static inline void set_chan_attn(unsigned long ioaddr, u16 hacr) +{ + hacr_write(ioaddr, hacr | HACR_CA); +} /* set_chan_attn */ + +/*------------------------------------------------------------------*/ +/* + * Reset, and then set host adaptor into default mode. + */ +static inline void wv_hacr_reset(unsigned long ioaddr) +{ + hacr_write_slow(ioaddr, HACR_RESET); + hacr_write(ioaddr, HACR_DEFAULT); +} /* wv_hacr_reset */ + +/*------------------------------------------------------------------*/ +/* + * Set the I/O transfer over the ISA bus to 8-bit mode + */ +static inline void wv_16_off(unsigned long ioaddr, u16 hacr) +{ + hacr &= ~HACR_16BITS; + hacr_write(ioaddr, hacr); +} /* wv_16_off */ + +/*------------------------------------------------------------------*/ +/* + * Set the I/O transfer over the ISA bus to 8-bit mode + */ +static inline void wv_16_on(unsigned long ioaddr, u16 hacr) +{ + hacr |= HACR_16BITS; + hacr_write(ioaddr, hacr); +} /* wv_16_on */ + +/*------------------------------------------------------------------*/ +/* + * Disable interrupts on the WaveLAN hardware. + * (called by wv_82586_stop()) + */ +static inline void wv_ints_off(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + + lp->hacr &= ~HACR_INTRON; + hacr_write(ioaddr, lp->hacr); +} /* wv_ints_off */ + +/*------------------------------------------------------------------*/ +/* + * Enable interrupts on the WaveLAN hardware. + * (called by wv_hw_reset()) + */ +static inline void wv_ints_on(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + + lp->hacr |= HACR_INTRON; + hacr_write(ioaddr, lp->hacr); +} /* wv_ints_on */ + +/******************* MODEM MANAGEMENT SUBROUTINES *******************/ +/* + * Useful subroutines to manage the modem of the WaveLAN + */ + +/*------------------------------------------------------------------*/ +/* + * Read the Parameter Storage Area from the WaveLAN card's memory + */ +/* + * Read bytes from the PSA. + */ +static void psa_read(unsigned long ioaddr, u16 hacr, int o, /* offset in PSA */ + u8 * b, /* buffer to fill */ + int n) +{ /* size to read */ + wv_16_off(ioaddr, hacr); + + while (n-- > 0) { + outw(o, PIOR2(ioaddr)); + o++; + *b++ = inb(PIOP2(ioaddr)); + } + + wv_16_on(ioaddr, hacr); +} /* psa_read */ + +/*------------------------------------------------------------------*/ +/* + * Write the Parameter Storage Area to the WaveLAN card's memory. + */ +static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */ + u8 * b, /* Buffer in memory */ + int n) +{ /* Length of buffer */ + int count = 0; + + wv_16_off(ioaddr, hacr); + + while (n-- > 0) { + outw(o, PIOR2(ioaddr)); + o++; + + outb(*b, PIOP2(ioaddr)); + b++; + + /* Wait for the memory to finish its write cycle */ + count = 0; + while ((count++ < 100) && + (hasr_read(ioaddr) & HASR_PSA_BUSY)) mdelay(1); + } + + wv_16_on(ioaddr, hacr); +} /* psa_write */ + +#ifdef SET_PSA_CRC +/*------------------------------------------------------------------*/ +/* + * Calculate the PSA CRC + * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code + * NOTE: By specifying a length including the CRC position the + * returned value should be zero. (i.e. a correct checksum in the PSA) + * + * The Windows drivers don't use the CRC, but the AP and the PtP tool + * depend on it. + */ +static inline u16 psa_crc(u8 * psa, /* The PSA */ + int size) +{ /* Number of short for CRC */ + int byte_cnt; /* Loop on the PSA */ + u16 crc_bytes = 0; /* Data in the PSA */ + int bit_cnt; /* Loop on the bits of the short */ + + for (byte_cnt = 0; byte_cnt < size; byte_cnt++) { + crc_bytes ^= psa[byte_cnt]; /* Its an xor */ + + for (bit_cnt = 1; bit_cnt < 9; bit_cnt++) { + if (crc_bytes & 0x0001) + crc_bytes = (crc_bytes >> 1) ^ 0xA001; + else + crc_bytes >>= 1; + } + } + + return crc_bytes; +} /* psa_crc */ +#endif /* SET_PSA_CRC */ + +/*------------------------------------------------------------------*/ +/* + * update the checksum field in the Wavelan's PSA + */ +static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u16 hacr) +{ +#ifdef SET_PSA_CRC + psa_t psa; + u16 crc; + + /* read the parameter storage area */ + psa_read(ioaddr, hacr, 0, (unsigned char *) &psa, sizeof(psa)); + + /* update the checksum */ + crc = psa_crc((unsigned char *) &psa, + sizeof(psa) - sizeof(psa.psa_crc[0]) - + sizeof(psa.psa_crc[1]) + - sizeof(psa.psa_crc_status)); + + psa.psa_crc[0] = crc & 0xFF; + psa.psa_crc[1] = (crc & 0xFF00) >> 8; + + /* Write it ! */ + psa_write(ioaddr, hacr, (char *) &psa.psa_crc - (char *) &psa, + (unsigned char *) &psa.psa_crc, 2); + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n", + dev->name, psa.psa_crc[0], psa.psa_crc[1]); + + /* Check again (luxury !) */ + crc = psa_crc((unsigned char *) &psa, + sizeof(psa) - sizeof(psa.psa_crc_status)); + + if (crc != 0) + printk(KERN_WARNING + "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", + dev->name); +#endif /* DEBUG_IOCTL_INFO */ +#endif /* SET_PSA_CRC */ +} /* update_psa_checksum */ + +/*------------------------------------------------------------------*/ +/* + * Write 1 byte to the MMC. + */ +static inline void mmc_out(unsigned long ioaddr, u16 o, u8 d) +{ + int count = 0; + + /* Wait for MMC to go idle */ + while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY)) + udelay(10); + + outw((u16) (((u16) d << 8) | (o << 1) | 1), MMCR(ioaddr)); +} + +/*------------------------------------------------------------------*/ +/* + * Routine to write bytes to the Modem Management Controller. + * We start at the end because it is the way it should be! + */ +static inline void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n) +{ + o += n; + b += n; + + while (n-- > 0) + mmc_out(ioaddr, --o, *(--b)); +} /* mmc_write */ + +/*------------------------------------------------------------------*/ +/* + * Read a byte from the MMC. + * Optimised version for 1 byte, avoid using memory. + */ +static inline u8 mmc_in(unsigned long ioaddr, u16 o) +{ + int count = 0; + + while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY)) + udelay(10); + outw(o << 1, MMCR(ioaddr)); + + while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY)) + udelay(10); + return (u8) (inw(MMCR(ioaddr)) >> 8); +} + +/*------------------------------------------------------------------*/ +/* + * Routine to read bytes from the Modem Management Controller. + * The implementation is complicated by a lack of address lines, + * which prevents decoding of the low-order bit. + * (code has just been moved in the above function) + * We start at the end because it is the way it should be! + */ +static inline void mmc_read(unsigned long ioaddr, u8 o, u8 * b, int n) +{ + o += n; + b += n; + + while (n-- > 0) + *(--b) = mmc_in(ioaddr, --o); +} /* mmc_read */ + +/*------------------------------------------------------------------*/ +/* + * Get the type of encryption available. + */ +static inline int mmc_encr(unsigned long ioaddr) +{ /* I/O port of the card */ + int temp; + + temp = mmc_in(ioaddr, mmroff(0, mmr_des_avail)); + if ((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES)) + return 0; + else + return temp; +} + +/*------------------------------------------------------------------*/ +/* + * Wait for the frequency EEPROM to complete a command. + * I hope this one will be optimally inlined. + */ +static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */ + int delay, /* Base delay to wait for */ + int number) +{ /* Number of time to wait */ + int count = 0; /* Wait only a limited time */ + + while ((count++ < number) && + (mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & + MMR_FEE_STATUS_BUSY)) udelay(delay); +} + +/*------------------------------------------------------------------*/ +/* + * Read bytes from the Frequency EEPROM (frequency select cards). + */ +static void fee_read(unsigned long ioaddr, /* I/O port of the card */ + u16 o, /* destination offset */ + u16 * b, /* data buffer */ + int n) +{ /* number of registers */ + b += n; /* Position at the end of the area */ + + /* Write the address */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1); + + /* Loop on all buffer */ + while (n-- > 0) { + /* Write the read command */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), + MMW_FEE_CTRL_READ); + + /* Wait until EEPROM is ready (should be quick). */ + fee_wait(ioaddr, 10, 100); + + /* Read the value. */ + *--b = ((mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)) << 8) | + mmc_in(ioaddr, mmroff(0, mmr_fee_data_l))); + } +} + +#ifdef WIRELESS_EXT /* if the wireless extension exists in the kernel */ + +/*------------------------------------------------------------------*/ +/* + * Write bytes from the Frequency EEPROM (frequency select cards). + * This is a bit complicated, because the frequency EEPROM has to + * be unprotected and the write enabled. + * Jean II + */ +static void fee_write(unsigned long ioaddr, /* I/O port of the card */ + u16 o, /* destination offset */ + u16 * b, /* data buffer */ + int n) +{ /* number of registers */ + b += n; /* Position at the end of the area. */ + +#ifdef EEPROM_IS_PROTECTED /* disabled */ +#ifdef DOESNT_SEEM_TO_WORK /* disabled */ + /* Ask to read the protected register */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD); + + fee_wait(ioaddr, 10, 100); + + /* Read the protected register. */ + printk("Protected 2: %02X-%02X\n", + mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)), + mmc_in(ioaddr, mmroff(0, mmr_fee_data_l))); +#endif /* DOESNT_SEEM_TO_WORK */ + + /* Enable protected register. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN); + + fee_wait(ioaddr, 10, 100); + + /* Unprotect area. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); +#ifdef DOESNT_SEEM_TO_WORK /* disabled */ + /* or use: */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR); +#endif /* DOESNT_SEEM_TO_WORK */ + + fee_wait(ioaddr, 10, 100); +#endif /* EEPROM_IS_PROTECTED */ + + /* Write enable. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN); + + fee_wait(ioaddr, 10, 100); + + /* Write the EEPROM address. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1); + + /* Loop on all buffer */ + while (n-- > 0) { + /* Write the value. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_data_h), (*--b) >> 8); + mmc_out(ioaddr, mmwoff(0, mmw_fee_data_l), *b & 0xFF); + + /* Write the write command. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), + MMW_FEE_CTRL_WRITE); + + /* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */ + mdelay(10); + fee_wait(ioaddr, 10, 100); + } + + /* Write disable. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS); + + fee_wait(ioaddr, 10, 100); + +#ifdef EEPROM_IS_PROTECTED /* disabled */ + /* Reprotect EEPROM. */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x00); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); + + fee_wait(ioaddr, 10, 100); +#endif /* EEPROM_IS_PROTECTED */ +} +#endif /* WIRELESS_EXT */ + +/************************ I82586 SUBROUTINES *************************/ +/* + * Useful subroutines to manage the Ethernet controller + */ + +/*------------------------------------------------------------------*/ +/* + * Read bytes from the on-board RAM. + * Why does inlining this function make it fail? + */ +static /*inline */ void obram_read(unsigned long ioaddr, + u16 o, u8 * b, int n) +{ + outw(o, PIOR1(ioaddr)); + insw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1); +} + +/*------------------------------------------------------------------*/ +/* + * Write bytes to the on-board RAM. + */ +static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n) +{ + outw(o, PIOR1(ioaddr)); + outsw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1); +} + +/*------------------------------------------------------------------*/ +/* + * Acknowledge the reading of the status issued by the i82586. + */ +static void wv_ack(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + u16 scb_cs; + int i; + + obram_read(ioaddr, scboff(OFFSET_SCB, scb_status), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + scb_cs &= SCB_ST_INT; + + if (scb_cs == 0) + return; + + obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + + set_chan_attn(ioaddr, lp->hacr); + + for (i = 1000; i > 0; i--) { + obram_read(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + if (scb_cs == 0) + break; + + udelay(10); + } + udelay(100); + +#ifdef DEBUG_CONFIG_ERROR + if (i <= 0) + printk(KERN_INFO + "%s: wv_ack(): board not accepting command.\n", + dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * Set channel attention bit and busy wait until command has + * completed, then acknowledge completion of the command. + */ +static inline int wv_synchronous_cmd(struct net_device * dev, const char *str) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + u16 scb_cmd; + ach_t cb; + int i; + + scb_cmd = SCB_CMD_CUC & SCB_CMD_CUC_GO; + obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cmd, sizeof(scb_cmd)); + + set_chan_attn(ioaddr, lp->hacr); + + for (i = 1000; i > 0; i--) { + obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, + sizeof(cb)); + if (cb.ac_status & AC_SFLD_C) + break; + + udelay(10); + } + udelay(100); + + if (i <= 0 || !(cb.ac_status & AC_SFLD_OK)) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO "%s: %s failed; status = 0x%x\n", + dev->name, str, cb.ac_status); +#endif +#ifdef DEBUG_I82586_SHOW + wv_scb_show(ioaddr); +#endif + return -1; + } + + /* Ack the status */ + wv_ack(dev); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Configuration commands completion interrupt. + * Check if done, and if OK. + */ +static inline int +wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp) +{ + unsigned short mcs_addr; + unsigned short status; + int ret; + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: ->wv_config_complete()\n", dev->name); +#endif + + mcs_addr = lp->tx_first_in_use + sizeof(ac_tx_t) + sizeof(ac_nop_t) + + sizeof(tbd_t) + sizeof(ac_cfg_t) + sizeof(ac_ias_t); + + /* Read the status of the last command (set mc list). */ + obram_read(ioaddr, acoff(mcs_addr, ac_status), + (unsigned char *) &status, sizeof(status)); + + /* If not completed -> exit */ + if ((status & AC_SFLD_C) == 0) + ret = 0; /* Not ready to be scrapped */ + else { +#ifdef DEBUG_CONFIG_ERROR + unsigned short cfg_addr; + unsigned short ias_addr; + + /* Check mc_config command */ + if ((status & AC_SFLD_OK) != AC_SFLD_OK) + printk(KERN_INFO + "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n", + dev->name, status); + + /* check ia-config command */ + ias_addr = mcs_addr - sizeof(ac_ias_t); + obram_read(ioaddr, acoff(ias_addr, ac_status), + (unsigned char *) &status, sizeof(status)); + if ((status & AC_SFLD_OK) != AC_SFLD_OK) + printk(KERN_INFO + "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n", + dev->name, status); + + /* Check config command. */ + cfg_addr = ias_addr - sizeof(ac_cfg_t); + obram_read(ioaddr, acoff(cfg_addr, ac_status), + (unsigned char *) &status, sizeof(status)); + if ((status & AC_SFLD_OK) != AC_SFLD_OK) + printk(KERN_INFO + "%s: wv_config_complete(): configure failed; status = 0x%x\n", + dev->name, status); +#endif /* DEBUG_CONFIG_ERROR */ + + ret = 1; /* Ready to be scrapped */ + } + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: <-wv_config_complete() - %d\n", dev->name, + ret); +#endif + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Command completion interrupt. + * Reclaim as many freed tx buffers as we can. + * (called in wavelan_interrupt()). + * Note : the spinlock is already grabbed for us. + */ +static int wv_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp) +{ + int nreaped = 0; + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: ->wv_complete()\n", dev->name); +#endif + + /* Loop on all the transmit buffers */ + while (lp->tx_first_in_use != I82586NULL) { + unsigned short tx_status; + + /* Read the first transmit buffer */ + obram_read(ioaddr, acoff(lp->tx_first_in_use, ac_status), + (unsigned char *) &tx_status, + sizeof(tx_status)); + + /* If not completed -> exit */ + if ((tx_status & AC_SFLD_C) == 0) + break; + + /* Hack for reconfiguration */ + if (tx_status == 0xFFFF) + if (!wv_config_complete(dev, ioaddr, lp)) + break; /* Not completed */ + + /* We now remove this buffer */ + nreaped++; + --lp->tx_n_in_use; + +/* +if (lp->tx_n_in_use > 0) + printk("%c", "0123456789abcdefghijk"[lp->tx_n_in_use]); +*/ + + /* Was it the last one? */ + if (lp->tx_n_in_use <= 0) + lp->tx_first_in_use = I82586NULL; + else { + /* Next one in the chain */ + lp->tx_first_in_use += TXBLOCKZ; + if (lp->tx_first_in_use >= + OFFSET_CU + + NTXBLOCKS * TXBLOCKZ) lp->tx_first_in_use -= + NTXBLOCKS * TXBLOCKZ; + } + + /* Hack for reconfiguration */ + if (tx_status == 0xFFFF) + continue; + + /* Now, check status of the finished command */ + if (tx_status & AC_SFLD_OK) { + int ncollisions; + + lp->stats.tx_packets++; + ncollisions = tx_status & AC_SFLD_MAXCOL; + lp->stats.collisions += ncollisions; +#ifdef DEBUG_TX_INFO + if (ncollisions > 0) + printk(KERN_DEBUG + "%s: wv_complete(): tx completed after %d collisions.\n", + dev->name, ncollisions); +#endif + } else { + lp->stats.tx_errors++; + if (tx_status & AC_SFLD_S10) { + lp->stats.tx_carrier_errors++; +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG + "%s: wv_complete(): tx error: no CS.\n", + dev->name); +#endif + } + if (tx_status & AC_SFLD_S9) { + lp->stats.tx_carrier_errors++; +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG + "%s: wv_complete(): tx error: lost CTS.\n", + dev->name); +#endif + } + if (tx_status & AC_SFLD_S8) { + lp->stats.tx_fifo_errors++; +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG + "%s: wv_complete(): tx error: slow DMA.\n", + dev->name); +#endif + } + if (tx_status & AC_SFLD_S6) { + lp->stats.tx_heartbeat_errors++; +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG + "%s: wv_complete(): tx error: heart beat.\n", + dev->name); +#endif + } + if (tx_status & AC_SFLD_S5) { + lp->stats.tx_aborted_errors++; +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG + "%s: wv_complete(): tx error: too many collisions.\n", + dev->name); +#endif + } + } + +#ifdef DEBUG_TX_INFO + printk(KERN_DEBUG + "%s: wv_complete(): tx completed, tx_status 0x%04x\n", + dev->name, tx_status); +#endif + } + +#ifdef DEBUG_INTERRUPT_INFO + if (nreaped > 1) + printk(KERN_DEBUG "%s: wv_complete(): reaped %d\n", + dev->name, nreaped); +#endif + + /* + * Inform upper layers. + */ + if (lp->tx_n_in_use < NTXBLOCKS - 1) { + netif_wake_queue(dev); + } +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: <-wv_complete()\n", dev->name); +#endif + return nreaped; +} + +/*------------------------------------------------------------------*/ +/* + * Reconfigure the i82586, or at least ask for it. + * Because wv_82586_config uses a transmission buffer, we must do it + * when we are sure that there is one left, so we do it now + * or in wavelan_packet_xmit() (I can't find any better place, + * wavelan_interrupt is not an option), so you may experience + * delays sometimes. + */ +static inline void wv_82586_reconfig(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long flags; + + /* Arm the flag, will be cleard in wv_82586_config() */ + lp->reconfig_82586 = 1; + + /* Check if we can do it now ! */ + if((netif_running(dev)) && !(netif_queue_stopped(dev))) { + spin_lock_irqsave(&lp->spinlock, flags); + /* May fail */ + wv_82586_config(dev); + spin_unlock_irqrestore(&lp->spinlock, flags); + } + else { +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG + "%s: wv_82586_reconfig(): delayed (state = %lX)\n", + dev->name, dev->state); +#endif + } +} + +/********************* DEBUG & INFO SUBROUTINES *********************/ +/* + * This routine is used in the code to show information for debugging. + * Most of the time, it dumps the contents of hardware structures. + */ + +#ifdef DEBUG_PSA_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted contents of the Parameter Storage Area. + */ +static void wv_psa_show(psa_t * p) +{ + printk(KERN_DEBUG "##### WaveLAN PSA contents: #####\n"); + printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n", + p->psa_io_base_addr_1, + p->psa_io_base_addr_2, + p->psa_io_base_addr_3, p->psa_io_base_addr_4); + printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n", + p->psa_rem_boot_addr_1, + p->psa_rem_boot_addr_2, p->psa_rem_boot_addr_3); + printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params); + printk("psa_int_req_no: %d\n", p->psa_int_req_no); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG + "psa_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + p->psa_unused0[0], p->psa_unused0[1], p->psa_unused0[2], + p->psa_unused0[3], p->psa_unused0[4], p->psa_unused0[5], + p->psa_unused0[6]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG + "psa_univ_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n", + p->psa_univ_mac_addr[0], p->psa_univ_mac_addr[1], + p->psa_univ_mac_addr[2], p->psa_univ_mac_addr[3], + p->psa_univ_mac_addr[4], p->psa_univ_mac_addr[5]); + printk(KERN_DEBUG + "psa_local_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n", + p->psa_local_mac_addr[0], p->psa_local_mac_addr[1], + p->psa_local_mac_addr[2], p->psa_local_mac_addr[3], + p->psa_local_mac_addr[4], p->psa_local_mac_addr[5]); + printk(KERN_DEBUG "psa_univ_local_sel: %d, ", + p->psa_univ_local_sel); + printk("psa_comp_number: %d, ", p->psa_comp_number); + printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set); + printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ", + p->psa_feature_select); + printk("psa_subband/decay_update_prm: %d\n", p->psa_subband); + printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr); + printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay); + printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], + p->psa_nwid[1]); + printk("psa_nwid_select: %d\n", p->psa_nwid_select); + printk(KERN_DEBUG "psa_encryption_select: %d, ", + p->psa_encryption_select); + printk + ("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + p->psa_encryption_key[0], p->psa_encryption_key[1], + p->psa_encryption_key[2], p->psa_encryption_key[3], + p->psa_encryption_key[4], p->psa_encryption_key[5], + p->psa_encryption_key[6], p->psa_encryption_key[7]); + printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width); + printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ", + p->psa_call_code[0]); + printk + ("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + p->psa_call_code[0], p->psa_call_code[1], p->psa_call_code[2], + p->psa_call_code[3], p->psa_call_code[4], p->psa_call_code[5], + p->psa_call_code[6], p->psa_call_code[7]); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n", + p->psa_reserved[0], + p->psa_reserved[1], p->psa_reserved[2], p->psa_reserved[3]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status); + printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]); + printk("psa_crc_status: 0x%02x\n", p->psa_crc_status); +} /* wv_psa_show */ +#endif /* DEBUG_PSA_SHOW */ + +#ifdef DEBUG_MMC_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the Modem Management Controller. + * This function needs to be completed. + */ +static void wv_mmc_show(struct net_device * dev) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; + mmr_t m; + + /* Basic check */ + if (hasr_read(ioaddr) & HASR_NO_CLK) { + printk(KERN_WARNING + "%s: wv_mmc_show: modem not connected\n", + dev->name); + return; + } + + /* Read the mmc */ + mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1); + mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m)); + mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); + +#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */ + /* Don't forget to update statistics */ + lp->wstats.discard.nwid += + (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; +#endif /* WIRELESS_EXT */ + + printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n"); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG + "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + m.mmr_unused0[0], m.mmr_unused0[1], m.mmr_unused0[2], + m.mmr_unused0[3], m.mmr_unused0[4], m.mmr_unused0[5], + m.mmr_unused0[6], m.mmr_unused0[7]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", + m.mmr_des_avail, m.mmr_des_status); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", + m.mmr_unused1[0], + m.mmr_unused1[1], + m.mmr_unused1[2], m.mmr_unused1[3], m.mmr_unused1[4]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n", + m.mmr_dce_status, + (m. + mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? + "energy detected," : "", + (m. + mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ? + "loop test indicated," : "", + (m. + mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? + "transmitter on," : "", + (m. + mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ? + "jabber timer expired," : ""); + printk(KERN_DEBUG "Dsp ID: %02X\n", m.mmr_dsp_id); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n", + m.mmr_unused2[0], m.mmr_unused2[1]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n", + (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l, + (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l); + printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n", + m.mmr_thr_pre_set & MMR_THR_PRE_SET, + (m. + mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : + "below"); + printk(KERN_DEBUG "signal_lvl: %d [%s], ", + m.mmr_signal_lvl & MMR_SIGNAL_LVL, + (m. + mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : + "no new msg"); + printk("silence_lvl: %d [%s], ", + m.mmr_silence_lvl & MMR_SILENCE_LVL, + (m. + mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : + "no new update"); + printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL, + (m. + mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : + "Antenna 0"); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l); +#endif /* DEBUG_SHOW_UNUSED */ +} /* wv_mmc_show */ +#endif /* DEBUG_MMC_SHOW */ + +#ifdef DEBUG_I82586_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the last block of the i82586 memory. + */ +static void wv_scb_show(unsigned long ioaddr) +{ + scb_t scb; + + obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb, + sizeof(scb)); + + printk(KERN_DEBUG "##### WaveLAN system control block: #####\n"); + + printk(KERN_DEBUG "status: "); + printk("stat 0x%x[%s%s%s%s] ", + (scb. + scb_status & (SCB_ST_CX | SCB_ST_FR | SCB_ST_CNA | + SCB_ST_RNR)) >> 12, + (scb. + scb_status & SCB_ST_CX) ? "command completion interrupt," : + "", (scb.scb_status & SCB_ST_FR) ? "frame received," : "", + (scb. + scb_status & SCB_ST_CNA) ? "command unit not active," : "", + (scb. + scb_status & SCB_ST_RNR) ? "receiving unit not ready," : + ""); + printk("cus 0x%x[%s%s%s] ", (scb.scb_status & SCB_ST_CUS) >> 8, + ((scb.scb_status & SCB_ST_CUS) == + SCB_ST_CUS_IDLE) ? "idle" : "", + ((scb.scb_status & SCB_ST_CUS) == + SCB_ST_CUS_SUSP) ? "suspended" : "", + ((scb.scb_status & SCB_ST_CUS) == + SCB_ST_CUS_ACTV) ? "active" : ""); + printk("rus 0x%x[%s%s%s%s]\n", (scb.scb_status & SCB_ST_RUS) >> 4, + ((scb.scb_status & SCB_ST_RUS) == + SCB_ST_RUS_IDLE) ? "idle" : "", + ((scb.scb_status & SCB_ST_RUS) == + SCB_ST_RUS_SUSP) ? "suspended" : "", + ((scb.scb_status & SCB_ST_RUS) == + SCB_ST_RUS_NRES) ? "no resources" : "", + ((scb.scb_status & SCB_ST_RUS) == + SCB_ST_RUS_RDY) ? "ready" : ""); + + printk(KERN_DEBUG "command: "); + printk("ack 0x%x[%s%s%s%s] ", + (scb. + scb_command & (SCB_CMD_ACK_CX | SCB_CMD_ACK_FR | + SCB_CMD_ACK_CNA | SCB_CMD_ACK_RNR)) >> 12, + (scb. + scb_command & SCB_CMD_ACK_CX) ? "ack cmd completion," : "", + (scb. + scb_command & SCB_CMD_ACK_FR) ? "ack frame received," : "", + (scb. + scb_command & SCB_CMD_ACK_CNA) ? "ack CU not active," : "", + (scb. + scb_command & SCB_CMD_ACK_RNR) ? "ack RU not ready," : ""); + printk("cuc 0x%x[%s%s%s%s%s] ", + (scb.scb_command & SCB_CMD_CUC) >> 8, + ((scb.scb_command & SCB_CMD_CUC) == + SCB_CMD_CUC_NOP) ? "nop" : "", + ((scb.scb_command & SCB_CMD_CUC) == + SCB_CMD_CUC_GO) ? "start cbl_offset" : "", + ((scb.scb_command & SCB_CMD_CUC) == + SCB_CMD_CUC_RES) ? "resume execution" : "", + ((scb.scb_command & SCB_CMD_CUC) == + SCB_CMD_CUC_SUS) ? "suspend execution" : "", + ((scb.scb_command & SCB_CMD_CUC) == + SCB_CMD_CUC_ABT) ? "abort execution" : ""); + printk("ruc 0x%x[%s%s%s%s%s]\n", + (scb.scb_command & SCB_CMD_RUC) >> 4, + ((scb.scb_command & SCB_CMD_RUC) == + SCB_CMD_RUC_NOP) ? "nop" : "", + ((scb.scb_command & SCB_CMD_RUC) == + SCB_CMD_RUC_GO) ? "start rfa_offset" : "", + ((scb.scb_command & SCB_CMD_RUC) == + SCB_CMD_RUC_RES) ? "resume reception" : "", + ((scb.scb_command & SCB_CMD_RUC) == + SCB_CMD_RUC_SUS) ? "suspend reception" : "", + ((scb.scb_command & SCB_CMD_RUC) == + SCB_CMD_RUC_ABT) ? "abort reception" : ""); + + printk(KERN_DEBUG "cbl_offset 0x%x ", scb.scb_cbl_offset); + printk("rfa_offset 0x%x\n", scb.scb_rfa_offset); + + printk(KERN_DEBUG "crcerrs %d ", scb.scb_crcerrs); + printk("alnerrs %d ", scb.scb_alnerrs); + printk("rscerrs %d ", scb.scb_rscerrs); + printk("ovrnerrs %d\n", scb.scb_ovrnerrs); +} + +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the i82586's receive unit. + */ +static void wv_ru_show(struct net_device * dev) +{ + /* net_local *lp = (net_local *) dev->priv; */ + + printk(KERN_DEBUG + "##### WaveLAN i82586 receiver unit status: #####\n"); + printk(KERN_DEBUG "ru:"); + /* + * Not implemented yet + */ + printk("\n"); +} /* wv_ru_show */ + +/*------------------------------------------------------------------*/ +/* + * Display info about one control block of the i82586 memory. + */ +static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p) +{ + unsigned long ioaddr; + ac_tx_t actx; + + ioaddr = dev->base_addr; + + printk("%d: 0x%x:", i, p); + + obram_read(ioaddr, p, (unsigned char *) &actx, sizeof(actx)); + printk(" status=0x%x,", actx.tx_h.ac_status); + printk(" command=0x%x,", actx.tx_h.ac_command); + + /* + { + tbd_t tbd; + + obram_read(ioaddr, actx.tx_tbd_offset, (unsigned char *)&tbd, sizeof(tbd)); + printk(" tbd_status=0x%x,", tbd.tbd_status); + } + */ + + printk("|"); +} + +/*------------------------------------------------------------------*/ +/* + * Print status of the command unit of the i82586. + */ +static void wv_cu_show(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned int i; + u16 p; + + printk(KERN_DEBUG + "##### WaveLAN i82586 command unit status: #####\n"); + + printk(KERN_DEBUG); + for (i = 0, p = lp->tx_first_in_use; i < NTXBLOCKS; i++) { + wv_cu_show_one(dev, lp, i, p); + + p += TXBLOCKZ; + if (p >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ) + p -= NTXBLOCKS * TXBLOCKZ; + } + printk("\n"); +} +#endif /* DEBUG_I82586_SHOW */ + +#ifdef DEBUG_DEVICE_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the WaveLAN PCMCIA device driver. + */ +static void wv_dev_show(struct net_device * dev) +{ + printk(KERN_DEBUG "dev:"); + printk(" state=%lX,", dev->state); + printk(" trans_start=%ld,", dev->trans_start); + printk(" flags=0x%x,", dev->flags); + printk("\n"); +} /* wv_dev_show */ + +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the WaveLAN PCMCIA device driver's + * private information. + */ +static void wv_local_show(struct net_device * dev) +{ + net_local *lp; + + lp = (net_local *) dev->priv; + + printk(KERN_DEBUG "local:"); + printk(" tx_n_in_use=%d,", lp->tx_n_in_use); + printk(" hacr=0x%x,", lp->hacr); + printk(" rx_head=0x%x,", lp->rx_head); + printk(" rx_last=0x%x,", lp->rx_last); + printk(" tx_first_free=0x%x,", lp->tx_first_free); + printk(" tx_first_in_use=0x%x,", lp->tx_first_in_use); + printk("\n"); +} /* wv_local_show */ +#endif /* DEBUG_DEVICE_SHOW */ + +#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) +/*------------------------------------------------------------------*/ +/* + * Dump packet header (and content if necessary) on the screen + */ +static inline void wv_packet_info(u8 * p, /* Packet to dump */ + int length, /* Length of the packet */ + char *msg1, /* Name of the device */ + char *msg2) +{ /* Name of the function */ + int i; + int maxi; + + printk(KERN_DEBUG + "%s: %s(): dest %02X:%02X:%02X:%02X:%02X:%02X, length %d\n", + msg1, msg2, p[0], p[1], p[2], p[3], p[4], p[5], length); + printk(KERN_DEBUG + "%s: %s(): src %02X:%02X:%02X:%02X:%02X:%02X, type 0x%02X%02X\n", + msg1, msg2, p[6], p[7], p[8], p[9], p[10], p[11], p[12], + p[13]); + +#ifdef DEBUG_PACKET_DUMP + + printk(KERN_DEBUG "data=\""); + + if ((maxi = length) > DEBUG_PACKET_DUMP) + maxi = DEBUG_PACKET_DUMP; + for (i = 14; i < maxi; i++) + if (p[i] >= ' ' && p[i] <= '~') + printk(" %c", p[i]); + else + printk("%02X", p[i]); + if (maxi < length) + printk(".."); + printk("\"\n"); + printk(KERN_DEBUG "\n"); +#endif /* DEBUG_PACKET_DUMP */ +} +#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */ + +/*------------------------------------------------------------------*/ +/* + * This is the information which is displayed by the driver at startup. + * There are lots of flags for configuring it to your liking. + */ +static inline void wv_init_info(struct net_device * dev) +{ + short ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; + psa_t psa; + int i; + + /* Read the parameter storage area */ + psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa)); + +#ifdef DEBUG_PSA_SHOW + wv_psa_show(&psa); +#endif +#ifdef DEBUG_MMC_SHOW + wv_mmc_show(dev); +#endif +#ifdef DEBUG_I82586_SHOW + wv_cu_show(dev); +#endif + +#ifdef DEBUG_BASIC_SHOW + /* Now, let's go for the basic stuff. */ + printk(KERN_NOTICE "%s: WaveLAN at %#x,", dev->name, ioaddr); + for (i = 0; i < WAVELAN_ADDR_SIZE; i++) + printk("%s%02X", (i == 0) ? " " : ":", dev->dev_addr[i]); + printk(", IRQ %d", dev->irq); + + /* Print current network ID. */ + if (psa.psa_nwid_select) + printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], + psa.psa_nwid[1]); + else + printk(", nwid off"); + + /* If 2.00 card */ + if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { + unsigned short freq; + + /* Ask the EEPROM to read the frequency from the first area. */ + fee_read(ioaddr, 0x00, &freq, 1); + + /* Print frequency */ + printk(", 2.00, %ld", (freq >> 6) + 2400L); + + /* Hack! */ + if (freq & 0x20) + printk(".5"); + } else { + printk(", PC"); + switch (psa.psa_comp_number) { + case PSA_COMP_PC_AT_915: + case PSA_COMP_PC_AT_2400: + printk("-AT"); + break; + case PSA_COMP_PC_MC_915: + case PSA_COMP_PC_MC_2400: + printk("-MC"); + break; + case PSA_COMP_PCMCIA_915: + printk("MCIA"); + break; + default: + printk("?"); + } + printk(", "); + switch (psa.psa_subband) { + case PSA_SUBBAND_915: + printk("915"); + break; + case PSA_SUBBAND_2425: + printk("2425"); + break; + case PSA_SUBBAND_2460: + printk("2460"); + break; + case PSA_SUBBAND_2484: + printk("2484"); + break; + case PSA_SUBBAND_2430_5: + printk("2430.5"); + break; + default: + printk("?"); + } + } + + printk(" MHz\n"); +#endif /* DEBUG_BASIC_SHOW */ + +#ifdef DEBUG_VERSION_SHOW + /* Print version information */ + printk(KERN_NOTICE "%s", version); +#endif +} /* wv_init_info */ + +/********************* IOCTL, STATS & RECONFIG *********************/ +/* + * We found here routines that are called by Linux on different + * occasions after the configuration and not for transmitting data + * These may be called when the user use ifconfig, /proc/net/dev + * or wireless extensions + */ + +/*------------------------------------------------------------------*/ +/* + * Get the current Ethernet statistics. This may be called with the + * card open or closed. + * Used when the user read /proc/net/dev + */ +static en_stats *wavelan_get_stats(struct net_device * dev) +{ +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name); +#endif + + return (&((net_local *) dev->priv)->stats); +} + +/*------------------------------------------------------------------*/ +/* + * Set or clear the multicast filter for this adaptor. + * num_addrs == -1 Promiscuous mode, receive all packets + * num_addrs == 0 Normal mode, clear multicast list + * num_addrs > 0 Multicast mode, receive normal and MC packets, + * and do best-effort filtering. + */ +static void wavelan_set_multicast_list(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", + dev->name); +#endif + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG + "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n", + dev->name, dev->flags, dev->mc_count); +#endif + + /* Are we asking for promiscuous mode, + * or all multicast addresses (we don't have that!) + * or too many multicast addresses for the hardware filter? */ + if ((dev->flags & IFF_PROMISC) || + (dev->flags & IFF_ALLMULTI) || + (dev->mc_count > I82586_MAX_MULTICAST_ADDRESSES)) { + /* + * Enable promiscuous mode: receive all packets. + */ + if (!lp->promiscuous) { + lp->promiscuous = 1; + lp->mc_count = 0; + + wv_82586_reconfig(dev); + + /* Tell the kernel that we are doing a really bad job. */ + dev->flags |= IFF_PROMISC; + } + } else + /* Are there multicast addresses to send? */ + if (dev->mc_list != (struct dev_mc_list *) NULL) { + /* + * Disable promiscuous mode, but receive all packets + * in multicast list + */ +#ifdef MULTICAST_AVOID + if (lp->promiscuous || (dev->mc_count != lp->mc_count)) +#endif + { + lp->promiscuous = 0; + lp->mc_count = dev->mc_count; + + wv_82586_reconfig(dev); + } + } else { + /* + * Switch to normal mode: disable promiscuous mode and + * clear the multicast list. + */ + if (lp->promiscuous || lp->mc_count == 0) { + lp->promiscuous = 0; + lp->mc_count = 0; + + wv_82586_reconfig(dev); + } + } +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", + dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * This function doesn't exist. + * (Note : it was a nice way to test the reconfigure stuff...) + */ +#ifdef SET_MAC_ADDRESS +static int wavelan_set_mac_address(struct net_device * dev, void *addr) +{ + struct sockaddr *mac = addr; + + /* Copy the address. */ + memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE); + + /* Reconfigure the beast. */ + wv_82586_reconfig(dev); + + return 0; +} +#endif /* SET_MAC_ADDRESS */ + +#ifdef WIRELESS_EXT /* if wireless extensions exist in the kernel */ + +/*------------------------------------------------------------------*/ +/* + * Frequency setting (for hardware capable of it) + * It's a bit complicated and you don't really want to look into it. + * (called in wavelan_ioctl) + */ +static inline int wv_set_frequency(unsigned long ioaddr, /* I/O port of the card */ + iw_freq * frequency) +{ + const int BAND_NUM = 10; /* Number of bands */ + long freq = 0L; /* offset to 2.4 GHz in .5 MHz */ +#ifdef DEBUG_IOCTL_INFO + int i; +#endif + + /* Setting by frequency */ + /* Theoretically, you may set any frequency between + * the two limits with a 0.5 MHz precision. In practice, + * I don't want you to have trouble with local regulations. + */ + if ((frequency->e == 1) && + (frequency->m >= (int) 2.412e8) + && (frequency->m <= (int) 2.487e8)) { + freq = ((frequency->m / 10000) - 24000L) / 5; + } + + /* Setting by channel (same as wfreqsel) */ + /* Warning: each channel is 22 MHz wide, so some of the channels + * will interfere. */ + if ((frequency->e == 0) && (frequency->m < BAND_NUM)) { + /* Get frequency offset. */ + freq = channel_bands[frequency->m] >> 1; + } + + /* Verify that the frequency is allowed. */ + if (freq != 0L) { + u16 table[10]; /* Authorized frequency table */ + + /* Read the frequency table. */ + fee_read(ioaddr, 0x71, table, 10); + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "Frequency table: "); + for (i = 0; i < 10; i++) { + printk(" %04X", table[i]); + } + printk("\n"); +#endif + + /* Look in the table to see whether the frequency is allowed. */ + if (!(table[9 - ((freq - 24) / 16)] & + (1 << ((freq - 24) % 16)))) return -EINVAL; /* not allowed */ + } else + return -EINVAL; + + /* if we get a usable frequency */ + if (freq != 0L) { + unsigned short area[16]; + unsigned short dac[2]; + unsigned short area_verify[16]; + unsigned short dac_verify[2]; + /* Corresponding gain (in the power adjust value table) + * See AT&T WaveLAN Data Manual, REF 407-024689/E, page 3-8 + * and WCIN062D.DOC, page 6.2.9. */ + unsigned short power_limit[] = { 40, 80, 120, 160, 0 }; + int power_band = 0; /* Selected band */ + unsigned short power_adjust; /* Correct value */ + + /* Search for the gain. */ + power_band = 0; + while ((freq > power_limit[power_band]) && + (power_limit[++power_band] != 0)); + + /* Read the first area. */ + fee_read(ioaddr, 0x00, area, 16); + + /* Read the DAC. */ + fee_read(ioaddr, 0x60, dac, 2); + + /* Read the new power adjust value. */ + fee_read(ioaddr, 0x6B - (power_band >> 1), &power_adjust, + 1); + if (power_band & 0x1) + power_adjust >>= 8; + else + power_adjust &= 0xFF; + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "WaveLAN EEPROM Area 1: "); + for (i = 0; i < 16; i++) { + printk(" %04X", area[i]); + } + printk("\n"); + + printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n", + dac[0], dac[1]); +#endif + + /* Frequency offset (for info only) */ + area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F); + + /* Receiver Principle main divider coefficient */ + area[3] = (freq >> 1) + 2400L - 352L; + area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); + + /* Transmitter Main divider coefficient */ + area[13] = (freq >> 1) + 2400L; + area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); + + /* Other parts of the area are flags, bit streams or unused. */ + + /* Set the value in the DAC. */ + dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80); + dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF); + + /* Write the first area. */ + fee_write(ioaddr, 0x00, area, 16); + + /* Write the DAC. */ + fee_write(ioaddr, 0x60, dac, 2); + + /* We now should verify here that the writing of the EEPROM went OK. */ + + /* Reread the first area. */ + fee_read(ioaddr, 0x00, area_verify, 16); + + /* Reread the DAC. */ + fee_read(ioaddr, 0x60, dac_verify, 2); + + /* Compare. */ + if (memcmp(area, area_verify, 16 * 2) || + memcmp(dac, dac_verify, 2 * 2)) { +#ifdef DEBUG_IOCTL_ERROR + printk(KERN_INFO + "WaveLAN: wv_set_frequency: unable to write new frequency to EEPROM(?).\n"); +#endif + return -EOPNOTSUPP; + } + + /* We must download the frequency parameters to the + * synthesizers (from the EEPROM - area 1) + * Note: as the EEPROM is automatically decremented, we set the end + * if the area... */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x0F); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), + MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); + + /* Wait until the download is finished. */ + fee_wait(ioaddr, 100, 100); + + /* We must now download the power adjust value (gain) to + * the synthesizers (from the EEPROM - area 7 - DAC). */ + mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x61); + mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), + MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); + + /* Wait for the download to finish. */ + fee_wait(ioaddr, 100, 100); + +#ifdef DEBUG_IOCTL_INFO + /* Verification of what we have done */ + + printk(KERN_DEBUG "WaveLAN EEPROM Area 1: "); + for (i = 0; i < 16; i++) { + printk(" %04X", area_verify[i]); + } + printk("\n"); + + printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n", + dac_verify[0], dac_verify[1]); +#endif + + return 0; + } else + return -EINVAL; /* Bah, never get there... */ +} + +/*------------------------------------------------------------------*/ +/* + * Give the list of available frequencies. + */ +static inline int wv_frequency_list(unsigned long ioaddr, /* I/O port of the card */ + iw_freq * list, /* List of frequencies to fill */ + int max) +{ /* Maximum number of frequencies */ + u16 table[10]; /* Authorized frequency table */ + long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */ + int i; /* index in the table */ + int c = 0; /* Channel number */ + + /* Read the frequency table. */ + fee_read(ioaddr, 0x71 /* frequency table */ , table, 10); + + /* Check all frequencies. */ + i = 0; + for (freq = 0; freq < 150; freq++) + /* Look in the table if the frequency is allowed */ + if (table[9 - (freq / 16)] & (1 << (freq % 16))) { + /* Compute approximate channel number */ + while ((((channel_bands[c] >> 1) - 24) < freq) && + (c < NELS(channel_bands))) + c++; + list[i].i = c; /* Set the list index */ + + /* put in the list */ + list[i].m = (((freq + 24) * 5) + 24000L) * 10000; + list[i++].e = 1; + + /* Check number. */ + if (i >= max) + return (i); + } + + return (i); +} + +#ifdef IW_WIRELESS_SPY +/*------------------------------------------------------------------*/ +/* + * Gather wireless spy statistics: for each packet, compare the source + * address with our list, and if they match, get the statistics. + * Sorry, but this function really needs the wireless extensions. + */ +static inline void wl_spy_gather(struct net_device * dev, + u8 * mac, /* MAC address */ + u8 * stats) /* Statistics to gather */ +{ + struct iw_quality wstats; + + wstats.qual = stats[2] & MMR_SGNL_QUAL; + wstats.level = stats[0] & MMR_SIGNAL_LVL; + wstats.noise = stats[1] & MMR_SILENCE_LVL; + wstats.updated = 0x7; + + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); +} +#endif /* IW_WIRELESS_SPY */ + +#ifdef HISTOGRAM +/*------------------------------------------------------------------*/ +/* + * This function calculates a histogram of the signal level. + * As the noise is quite constant, it's like doing it on the SNR. + * We have defined a set of interval (lp->his_range), and each time + * the level goes in that interval, we increment the count (lp->his_sum). + * With this histogram you may detect if one WaveLAN is really weak, + * or you may also calculate the mean and standard deviation of the level. + */ +static inline void wl_his_gather(struct net_device * dev, u8 * stats) +{ /* Statistics to gather */ + net_local *lp = (net_local *) dev->priv; + u8 level = stats[0] & MMR_SIGNAL_LVL; + int i; + + /* Find the correct interval. */ + i = 0; + while ((i < (lp->his_number - 1)) + && (level >= lp->his_range[i++])); + + /* Increment interval counter. */ + (lp->his_sum[i])++; +} +#endif /* HISTOGRAM */ + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get protocol name + */ +static int wavelan_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + strcpy(wrqu->name, "WaveLAN"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set NWID + */ +static int wavelan_set_nwid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + mm_t m; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Set NWID in WaveLAN. */ + if (!wrqu->nwid.disabled) { + /* Set NWID in psa */ + psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8; + psa.psa_nwid[1] = wrqu->nwid.value & 0xFF; + psa.psa_nwid_select = 0x01; + psa_write(ioaddr, lp->hacr, + (char *) psa.psa_nwid - (char *) &psa, + (unsigned char *) psa.psa_nwid, 3); + + /* Set NWID in mmc. */ + m.w.mmw_netw_id_l = psa.psa_nwid[1]; + m.w.mmw_netw_id_h = psa.psa_nwid[0]; + mmc_write(ioaddr, + (char *) &m.w.mmw_netw_id_l - + (char *) &m, + (unsigned char *) &m.w.mmw_netw_id_l, 2); + mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), 0x00); + } else { + /* Disable NWID in the psa. */ + psa.psa_nwid_select = 0x00; + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_nwid_select - + (char *) &psa, + (unsigned char *) &psa.psa_nwid_select, + 1); + + /* Disable NWID in the mmc (no filtering). */ + mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), + MMW_LOOPT_SEL_DIS_NWID); + } + /* update the Wavelan checksum */ + update_psa_checksum(dev, ioaddr, lp->hacr); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get NWID + */ +static int wavelan_get_nwid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Read the NWID. */ + psa_read(ioaddr, lp->hacr, + (char *) psa.psa_nwid - (char *) &psa, + (unsigned char *) psa.psa_nwid, 3); + wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1]; + wrqu->nwid.disabled = !(psa.psa_nwid_select); + wrqu->nwid.fixed = 1; /* Superfluous */ + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set frequency + */ +static int wavelan_set_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + unsigned long flags; + int ret; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ + if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) + ret = wv_set_frequency(ioaddr, &(wrqu->freq)); + else + ret = -EOPNOTSUPP; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get frequency + */ +static int wavelan_get_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). + * Does it work for everybody, especially old cards? */ + if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { + unsigned short freq; + + /* Ask the EEPROM to read the frequency from the first area. */ + fee_read(ioaddr, 0x00, &freq, 1); + wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000; + wrqu->freq.e = 1; + } else { + psa_read(ioaddr, lp->hacr, + (char *) &psa.psa_subband - (char *) &psa, + (unsigned char *) &psa.psa_subband, 1); + + if (psa.psa_subband <= 4) { + wrqu->freq.m = fixed_bands[psa.psa_subband]; + wrqu->freq.e = (psa.psa_subband != 0); + } else + ret = -EOPNOTSUPP; + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set level threshold + */ +static int wavelan_set_sens(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Set the level threshold. */ + /* We should complain loudly if wrqu->sens.fixed = 0, because we + * can't set auto mode... */ + psa.psa_thr_pre_set = wrqu->sens.value & 0x3F; + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_thr_pre_set - (char *) &psa, + (unsigned char *) &psa.psa_thr_pre_set, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev, ioaddr, lp->hacr); + mmc_out(ioaddr, mmwoff(0, mmw_thr_pre_set), + psa.psa_thr_pre_set); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get level threshold + */ +static int wavelan_get_sens(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Read the level threshold. */ + psa_read(ioaddr, lp->hacr, + (char *) &psa.psa_thr_pre_set - (char *) &psa, + (unsigned char *) &psa.psa_thr_pre_set, 1); + wrqu->sens.value = psa.psa_thr_pre_set & 0x3F; + wrqu->sens.fixed = 1; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set encryption key + */ +static int wavelan_set_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + unsigned long flags; + psa_t psa; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check if capable of encryption */ + if (!mmc_encr(ioaddr)) { + ret = -EOPNOTSUPP; + } + + /* Check the size of the key */ + if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) { + ret = -EINVAL; + } + + if(!ret) { + /* Basic checking... */ + if (wrqu->encoding.length == 8) { + /* Copy the key in the driver */ + memcpy(psa.psa_encryption_key, extra, + wrqu->encoding.length); + psa.psa_encryption_select = 1; + + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_encryption_select - + (char *) &psa, + (unsigned char *) &psa. + psa_encryption_select, 8 + 1); + + mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), + MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE); + mmc_write(ioaddr, mmwoff(0, mmw_encr_key), + (unsigned char *) &psa. + psa_encryption_key, 8); + } + + /* disable encryption */ + if (wrqu->encoding.flags & IW_ENCODE_DISABLED) { + psa.psa_encryption_select = 0; + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_encryption_select - + (char *) &psa, + (unsigned char *) &psa. + psa_encryption_select, 1); + + mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), 0); + } + /* update the Wavelan checksum */ + update_psa_checksum(dev, ioaddr, lp->hacr); + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get encryption key + */ +static int wavelan_get_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check if encryption is available */ + if (!mmc_encr(ioaddr)) { + ret = -EOPNOTSUPP; + } else { + /* Read the encryption key */ + psa_read(ioaddr, lp->hacr, + (char *) &psa.psa_encryption_select - + (char *) &psa, + (unsigned char *) &psa. + psa_encryption_select, 1 + 8); + + /* encryption is enabled ? */ + if (psa.psa_encryption_select) + wrqu->encoding.flags = IW_ENCODE_ENABLED; + else + wrqu->encoding.flags = IW_ENCODE_DISABLED; + wrqu->encoding.flags |= mmc_encr(ioaddr); + + /* Copy the key to the user buffer */ + wrqu->encoding.length = 8; + memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length); + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get range info + */ +static int wavelan_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + struct iw_range *range = (struct iw_range *) extra; + unsigned long flags; + int ret = 0; + + /* Set the length (very important for backward compatibility) */ + wrqu->data.length = sizeof(struct iw_range); + + /* Set all the info we don't care or don't know about to zero */ + memset(range, 0, sizeof(struct iw_range)); + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 9; + + /* Set information in the range struct. */ + range->throughput = 1.6 * 1000 * 1000; /* don't argue on this ! */ + range->min_nwid = 0x0000; + range->max_nwid = 0xFFFF; + + range->sensitivity = 0x3F; + range->max_qual.qual = MMR_SGNL_QUAL; + range->max_qual.level = MMR_SIGNAL_LVL; + range->max_qual.noise = MMR_SILENCE_LVL; + range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */ + /* Need to get better values for those two */ + range->avg_qual.level = 30; + range->avg_qual.noise = 8; + + range->num_bitrates = 1; + range->bitrate[0] = 2000000; /* 2 Mb/s */ + + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) | + IW_EVENT_CAPA_MASK(0x8B04)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ + if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { + range->num_channels = 10; + range->num_frequency = wv_frequency_list(ioaddr, range->freq, + IW_MAX_FREQUENCIES); + } else + range->num_channels = range->num_frequency = 0; + + /* Encryption supported ? */ + if (mmc_encr(ioaddr)) { + range->encoding_size[0] = 8; /* DES = 64 bits key */ + range->num_encoding_sizes = 1; + range->max_encoding_tokens = 1; /* Only one key possible */ + } else { + range->num_encoding_sizes = 0; + range->max_encoding_tokens = 0; + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : set quality threshold + */ +static int wavelan_set_qthr(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + psa.psa_quality_thr = *(extra) & 0x0F; + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_quality_thr - (char *) &psa, + (unsigned char *) &psa.psa_quality_thr, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev, ioaddr, lp->hacr); + mmc_out(ioaddr, mmwoff(0, mmw_quality_thr), + psa.psa_quality_thr); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get quality threshold + */ +static int wavelan_get_qthr(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + psa_t psa; + unsigned long flags; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + psa_read(ioaddr, lp->hacr, + (char *) &psa.psa_quality_thr - (char *) &psa, + (unsigned char *) &psa.psa_quality_thr, 1); + *(extra) = psa.psa_quality_thr & 0x0F; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return 0; +} + +#ifdef HISTOGRAM +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : set histogram + */ +static int wavelan_set_histo(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + + /* Check the number of intervals. */ + if (wrqu->data.length > 16) { + return(-E2BIG); + } + + /* Disable histo while we copy the addresses. + * As we don't disable interrupts, we need to do this */ + lp->his_number = 0; + + /* Are there ranges to copy? */ + if (wrqu->data.length > 0) { + /* Copy interval ranges to the driver */ + memcpy(lp->his_range, extra, wrqu->data.length); + + { + int i; + printk(KERN_DEBUG "Histo :"); + for(i = 0; i < wrqu->data.length; i++) + printk(" %d", lp->his_range[i]); + printk("\n"); + } + + /* Reset result structure. */ + memset(lp->his_sum, 0x00, sizeof(long) * 16); + } + + /* Now we can set the number of ranges */ + lp->his_number = wrqu->data.length; + + return(0); +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get histogram + */ +static int wavelan_get_histo(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = (net_local *) dev->priv; /* lp is not unused */ + + /* Set the number of intervals. */ + wrqu->data.length = lp->his_number; + + /* Give back the distribution statistics */ + if(lp->his_number > 0) + memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number); + + return(0); +} +#endif /* HISTOGRAM */ + +/*------------------------------------------------------------------*/ +/* + * Structures to export the Wireless Handlers + */ + +static const iw_handler wavelan_handler[] = +{ + NULL, /* SIOCSIWNAME */ + wavelan_get_name, /* SIOCGIWNAME */ + wavelan_set_nwid, /* SIOCSIWNWID */ + wavelan_get_nwid, /* SIOCGIWNWID */ + wavelan_set_freq, /* SIOCSIWFREQ */ + wavelan_get_freq, /* SIOCGIWFREQ */ + NULL, /* SIOCSIWMODE */ + NULL, /* SIOCGIWMODE */ + wavelan_set_sens, /* SIOCSIWSENS */ + wavelan_get_sens, /* SIOCGIWSENS */ + NULL, /* SIOCSIWRANGE */ + wavelan_get_range, /* SIOCGIWRANGE */ + NULL, /* SIOCSIWPRIV */ + NULL, /* SIOCGIWPRIV */ + NULL, /* SIOCSIWSTATS */ + NULL, /* SIOCGIWSTATS */ + iw_handler_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ + NULL, /* SIOCSIWAP */ + NULL, /* SIOCGIWAP */ + NULL, /* -- hole -- */ + NULL, /* SIOCGIWAPLIST */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWESSID */ + NULL, /* SIOCGIWESSID */ + NULL, /* SIOCSIWNICKN */ + NULL, /* SIOCGIWNICKN */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWRATE */ + NULL, /* SIOCGIWRATE */ + NULL, /* SIOCSIWRTS */ + NULL, /* SIOCGIWRTS */ + NULL, /* SIOCSIWFRAG */ + NULL, /* SIOCGIWFRAG */ + NULL, /* SIOCSIWTXPOW */ + NULL, /* SIOCGIWTXPOW */ + NULL, /* SIOCSIWRETRY */ + NULL, /* SIOCGIWRETRY */ + /* Bummer ! Why those are only at the end ??? */ + wavelan_set_encode, /* SIOCSIWENCODE */ + wavelan_get_encode, /* SIOCGIWENCODE */ +}; + +static const iw_handler wavelan_private_handler[] = +{ + wavelan_set_qthr, /* SIOCIWFIRSTPRIV */ + wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */ +#ifdef HISTOGRAM + wavelan_set_histo, /* SIOCIWFIRSTPRIV + 2 */ + wavelan_get_histo, /* SIOCIWFIRSTPRIV + 3 */ +#endif /* HISTOGRAM */ +}; + +static const struct iw_priv_args wavelan_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" }, + { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" }, + { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" }, + { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" }, +}; + +static const struct iw_handler_def wavelan_handler_def = +{ + .num_standard = sizeof(wavelan_handler)/sizeof(iw_handler), + .num_private = sizeof(wavelan_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(wavelan_private_args)/sizeof(struct iw_priv_args), + .standard = wavelan_handler, + .private = wavelan_private_handler, + .private_args = wavelan_private_args, + .get_wireless_stats = wavelan_get_wireless_stats, +}; + +/*------------------------------------------------------------------*/ +/* + * Get wireless statistics. + * Called by /proc/net/wireless + */ +static iw_stats *wavelan_get_wireless_stats(struct net_device * dev) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; + mmr_t m; + iw_stats *wstats; + unsigned long flags; + +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", + dev->name); +#endif + + /* Check */ + if (lp == (net_local *) NULL) + return (iw_stats *) NULL; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + wstats = &lp->wstats; + + /* Get data from the mmc. */ + mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1); + + mmc_read(ioaddr, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1); + mmc_read(ioaddr, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, + 2); + mmc_read(ioaddr, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, + 4); + + mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); + + /* Copy data to wireless stuff. */ + wstats->status = m.mmr_dce_status & MMR_DCE_STATUS; + wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL; + wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL; + wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL; + wstats->qual.updated = (((m. mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) + | ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) + | ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5)); + wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; + wstats->discard.code = 0L; + wstats->discard.misc = 0L; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", + dev->name); +#endif + return &lp->wstats; +} +#endif /* WIRELESS_EXT */ + +/************************* PACKET RECEPTION *************************/ +/* + * This part deals with receiving the packets. + * The interrupt handler gets an interrupt when a packet has been + * successfully received and calls this part. + */ + +/*------------------------------------------------------------------*/ +/* + * This routine does the actual copying of data (including the Ethernet + * header structure) from the WaveLAN card to an sk_buff chain that + * will be passed up to the network interface layer. NOTE: we + * currently don't handle trailer protocols (neither does the rest of + * the network interface), so if that is needed, it will (at least in + * part) be added here. The contents of the receive ring buffer are + * copied to a message chain that is then passed to the kernel. + * + * Note: if any errors occur, the packet is "dropped on the floor". + * (called by wv_packet_rcv()) + */ +static inline void +wv_packet_read(struct net_device * dev, u16 buf_off, int sksize) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + struct sk_buff *skb; + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n", + dev->name, buf_off, sksize); +#endif + + /* Allocate buffer for the data */ + if ((skb = dev_alloc_skb(sksize)) == (struct sk_buff *) NULL) { +#ifdef DEBUG_RX_ERROR + printk(KERN_INFO + "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n", + dev->name, sksize); +#endif + lp->stats.rx_dropped++; + return; + } + + skb->dev = dev; + + /* Copy the packet to the buffer. */ + obram_read(ioaddr, buf_off, skb_put(skb, sksize), sksize); + skb->protocol = eth_type_trans(skb, dev); + +#ifdef DEBUG_RX_INFO + wv_packet_info(skb->mac.raw, sksize, dev->name, "wv_packet_read"); +#endif /* DEBUG_RX_INFO */ + + /* Statistics-gathering and associated stuff. + * It seem a bit messy with all the define, but it's really + * simple... */ + if ( +#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ + (lp->spy_data.spy_number > 0) || +#endif /* IW_WIRELESS_SPY */ +#ifdef HISTOGRAM + (lp->his_number > 0) || +#endif /* HISTOGRAM */ + 0) { + u8 stats[3]; /* signal level, noise level, signal quality */ + + /* Read signal level, silence level and signal quality bytes */ + /* Note: in the PCMCIA hardware, these are part of the frame. + * It seems that for the ISA hardware, it's nowhere to be + * found in the frame, so I'm obliged to do this (it has a + * side effect on /proc/net/wireless). + * Any ideas? + */ + mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1); + mmc_read(ioaddr, mmroff(0, mmr_signal_lvl), stats, 3); + mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); + +#ifdef DEBUG_RX_INFO + printk(KERN_DEBUG + "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n", + dev->name, stats[0] & 0x3F, stats[1] & 0x3F, + stats[2] & 0x0F); +#endif + + /* Spying stuff */ +#ifdef IW_WIRELESS_SPY + wl_spy_gather(dev, skb->mac.raw + WAVELAN_ADDR_SIZE, + stats); +#endif /* IW_WIRELESS_SPY */ +#ifdef HISTOGRAM + wl_his_gather(dev, stats); +#endif /* HISTOGRAM */ + } + + /* + * Hand the packet to the network module. + */ + netif_rx(skb); + + /* Keep statistics up to date */ + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += sksize; + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * Transfer as many packets as we can + * from the device RAM. + * (called in wavelan_interrupt()). + * Note : the spinlock is already grabbed for us. + */ +static inline void wv_receive(struct net_device * dev) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; + fd_t fd; + rbd_t rbd; + int nreaped = 0; + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: ->wv_receive()\n", dev->name); +#endif + + /* Loop on each received packet. */ + for (;;) { + obram_read(ioaddr, lp->rx_head, (unsigned char *) &fd, + sizeof(fd)); + + /* Note about the status : + * It start up to be 0 (the value we set). Then, when the RU + * grab the buffer to prepare for reception, it sets the + * FD_STATUS_B flag. When the RU has finished receiving the + * frame, it clears FD_STATUS_B, set FD_STATUS_C to indicate + * completion and set the other flags to indicate the eventual + * errors. FD_STATUS_OK indicates that the reception was OK. + */ + + /* If the current frame is not complete, we have reached the end. */ + if ((fd.fd_status & FD_STATUS_C) != FD_STATUS_C) + break; /* This is how we exit the loop. */ + + nreaped++; + + /* Check whether frame was correctly received. */ + if ((fd.fd_status & FD_STATUS_OK) == FD_STATUS_OK) { + /* Does the frame contain a pointer to the data? Let's check. */ + if (fd.fd_rbd_offset != I82586NULL) { + /* Read the receive buffer descriptor */ + obram_read(ioaddr, fd.fd_rbd_offset, + (unsigned char *) &rbd, + sizeof(rbd)); + +#ifdef DEBUG_RX_ERROR + if ((rbd.rbd_status & RBD_STATUS_EOF) != + RBD_STATUS_EOF) printk(KERN_INFO + "%s: wv_receive(): missing EOF flag.\n", + dev->name); + + if ((rbd.rbd_status & RBD_STATUS_F) != + RBD_STATUS_F) printk(KERN_INFO + "%s: wv_receive(): missing F flag.\n", + dev->name); +#endif /* DEBUG_RX_ERROR */ + + /* Read the packet and transmit to Linux */ + wv_packet_read(dev, rbd.rbd_bufl, + rbd. + rbd_status & + RBD_STATUS_ACNT); + } +#ifdef DEBUG_RX_ERROR + else /* if frame has no data */ + printk(KERN_INFO + "%s: wv_receive(): frame has no data.\n", + dev->name); +#endif + } else { /* If reception was no successful */ + + lp->stats.rx_errors++; + +#ifdef DEBUG_RX_INFO + printk(KERN_DEBUG + "%s: wv_receive(): frame not received successfully (%X).\n", + dev->name, fd.fd_status); +#endif + +#ifdef DEBUG_RX_ERROR + if ((fd.fd_status & FD_STATUS_S6) != 0) + printk(KERN_INFO + "%s: wv_receive(): no EOF flag.\n", + dev->name); +#endif + + if ((fd.fd_status & FD_STATUS_S7) != 0) { + lp->stats.rx_length_errors++; +#ifdef DEBUG_RX_FAIL + printk(KERN_DEBUG + "%s: wv_receive(): frame too short.\n", + dev->name); +#endif + } + + if ((fd.fd_status & FD_STATUS_S8) != 0) { + lp->stats.rx_over_errors++; +#ifdef DEBUG_RX_FAIL + printk(KERN_DEBUG + "%s: wv_receive(): rx DMA overrun.\n", + dev->name); +#endif + } + + if ((fd.fd_status & FD_STATUS_S9) != 0) { + lp->stats.rx_fifo_errors++; +#ifdef DEBUG_RX_FAIL + printk(KERN_DEBUG + "%s: wv_receive(): ran out of resources.\n", + dev->name); +#endif + } + + if ((fd.fd_status & FD_STATUS_S10) != 0) { + lp->stats.rx_frame_errors++; +#ifdef DEBUG_RX_FAIL + printk(KERN_DEBUG + "%s: wv_receive(): alignment error.\n", + dev->name); +#endif + } + + if ((fd.fd_status & FD_STATUS_S11) != 0) { + lp->stats.rx_crc_errors++; +#ifdef DEBUG_RX_FAIL + printk(KERN_DEBUG + "%s: wv_receive(): CRC error.\n", + dev->name); +#endif + } + } + + fd.fd_status = 0; + obram_write(ioaddr, fdoff(lp->rx_head, fd_status), + (unsigned char *) &fd.fd_status, + sizeof(fd.fd_status)); + + fd.fd_command = FD_COMMAND_EL; + obram_write(ioaddr, fdoff(lp->rx_head, fd_command), + (unsigned char *) &fd.fd_command, + sizeof(fd.fd_command)); + + fd.fd_command = 0; + obram_write(ioaddr, fdoff(lp->rx_last, fd_command), + (unsigned char *) &fd.fd_command, + sizeof(fd.fd_command)); + + lp->rx_last = lp->rx_head; + lp->rx_head = fd.fd_link_offset; + } /* for(;;) -> loop on all frames */ + +#ifdef DEBUG_RX_INFO + if (nreaped > 1) + printk(KERN_DEBUG "%s: wv_receive(): reaped %d\n", + dev->name, nreaped); +#endif +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: <-wv_receive()\n", dev->name); +#endif +} + +/*********************** PACKET TRANSMISSION ***********************/ +/* + * This part deals with sending packets through the WaveLAN. + * + */ + +/*------------------------------------------------------------------*/ +/* + * This routine fills in the appropriate registers and memory + * locations on the WaveLAN card and starts the card off on + * the transmit. + * + * The principle: + * Each block contains a transmit command, a NOP command, + * a transmit block descriptor and a buffer. + * The CU read the transmit block which point to the tbd, + * read the tbd and the content of the buffer. + * When it has finish with it, it goes to the next command + * which in our case is the NOP. The NOP points on itself, + * so the CU stop here. + * When we add the next block, we modify the previous nop + * to make it point on the new tx command. + * Simple, isn't it ? + * + * (called in wavelan_packet_xmit()) + */ +static inline int wv_packet_write(struct net_device * dev, void *buf, short length) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + unsigned short txblock; + unsigned short txpred; + unsigned short tx_addr; + unsigned short nop_addr; + unsigned short tbd_addr; + unsigned short buf_addr; + ac_tx_t tx; + ac_nop_t nop; + tbd_t tbd; + int clen = length; + unsigned long flags; + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, + length); +#endif + + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check nothing bad has happened */ + if (lp->tx_n_in_use == (NTXBLOCKS - 1)) { +#ifdef DEBUG_TX_ERROR + printk(KERN_INFO "%s: wv_packet_write(): Tx queue full.\n", + dev->name); +#endif + spin_unlock_irqrestore(&lp->spinlock, flags); + return 1; + } + + /* Calculate addresses of next block and previous block. */ + txblock = lp->tx_first_free; + txpred = txblock - TXBLOCKZ; + if (txpred < OFFSET_CU) + txpred += NTXBLOCKS * TXBLOCKZ; + lp->tx_first_free += TXBLOCKZ; + if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ) + lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ; + + lp->tx_n_in_use++; + + /* Calculate addresses of the different parts of the block. */ + tx_addr = txblock; + nop_addr = tx_addr + sizeof(tx); + tbd_addr = nop_addr + sizeof(nop); + buf_addr = tbd_addr + sizeof(tbd); + + /* + * Transmit command + */ + tx.tx_h.ac_status = 0; + obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status), + (unsigned char *) &tx.tx_h.ac_status, + sizeof(tx.tx_h.ac_status)); + + /* + * NOP command + */ + nop.nop_h.ac_status = 0; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), + (unsigned char *) &nop.nop_h.ac_status, + sizeof(nop.nop_h.ac_status)); + nop.nop_h.ac_link = nop_addr; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), + (unsigned char *) &nop.nop_h.ac_link, + sizeof(nop.nop_h.ac_link)); + + /* + * Transmit buffer descriptor + */ + tbd.tbd_status = TBD_STATUS_EOF | (TBD_STATUS_ACNT & clen); + tbd.tbd_next_bd_offset = I82586NULL; + tbd.tbd_bufl = buf_addr; + tbd.tbd_bufh = 0; + obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, sizeof(tbd)); + + /* + * Data + */ + obram_write(ioaddr, buf_addr, buf, length); + + /* + * Overwrite the predecessor NOP link + * so that it points to this txblock. + */ + nop_addr = txpred + sizeof(tx); + nop.nop_h.ac_status = 0; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), + (unsigned char *) &nop.nop_h.ac_status, + sizeof(nop.nop_h.ac_status)); + nop.nop_h.ac_link = txblock; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), + (unsigned char *) &nop.nop_h.ac_link, + sizeof(nop.nop_h.ac_link)); + + /* Make sure the watchdog will keep quiet for a while */ + dev->trans_start = jiffies; + + /* Keep stats up to date. */ + lp->stats.tx_bytes += length; + + if (lp->tx_first_in_use == I82586NULL) + lp->tx_first_in_use = txblock; + + if (lp->tx_n_in_use < NTXBLOCKS - 1) + netif_wake_queue(dev); + + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_TX_INFO + wv_packet_info((u8 *) buf, length, dev->name, + "wv_packet_write"); +#endif /* DEBUG_TX_INFO */ + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name); +#endif + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * This routine is called when we want to send a packet (NET3 callback) + * In this routine, we check if the harware is ready to accept + * the packet. We also prevent reentrance. Then we call the function + * to send the packet. + */ +static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long flags; + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name, + (unsigned) skb); +#endif + + /* + * Block a timer-based transmit from overlapping. + * In other words, prevent reentering this routine. + */ + netif_stop_queue(dev); + + /* If somebody has asked to reconfigure the controller, + * we can do it now. + */ + if (lp->reconfig_82586) { + spin_lock_irqsave(&lp->spinlock, flags); + wv_82586_config(dev); + spin_unlock_irqrestore(&lp->spinlock, flags); + /* Check that we can continue */ + if (lp->tx_n_in_use == (NTXBLOCKS - 1)) + return 1; + } +#ifdef DEBUG_TX_ERROR + if (skb->next) + printk(KERN_INFO "skb has next\n"); +#endif + + /* Do we need some padding? */ + /* Note : on wireless the propagation time is in the order of 1us, + * and we don't have the Ethernet specific requirement of beeing + * able to detect collisions, therefore in theory we don't really + * need to pad. Jean II */ + if (skb->len < ETH_ZLEN) { + skb = skb_padto(skb, ETH_ZLEN); + if (skb == NULL) + return 0; + } + + /* Write packet on the card */ + if(wv_packet_write(dev, skb->data, skb->len)) + return 1; /* We failed */ + + dev_kfree_skb(skb); + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name); +#endif + return 0; +} + +/*********************** HARDWARE CONFIGURATION ***********************/ +/* + * This part does the real job of starting and configuring the hardware. + */ + +/*--------------------------------------------------------------------*/ +/* + * Routine to initialize the Modem Management Controller. + * (called by wv_hw_reset()) + */ +static inline int wv_mmc_init(struct net_device * dev) +{ + unsigned long ioaddr = dev->base_addr; + net_local *lp = (net_local *) dev->priv; + psa_t psa; + mmw_t m; + int configured; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name); +#endif + + /* Read the parameter storage area. */ + psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa)); + +#ifdef USE_PSA_CONFIG + configured = psa.psa_conf_status & 1; +#else + configured = 0; +#endif + + /* Is the PSA is not configured */ + if (!configured) { + /* User will be able to configure NWID later (with iwconfig). */ + psa.psa_nwid[0] = 0; + psa.psa_nwid[1] = 0; + + /* no NWID checking since NWID is not set */ + psa.psa_nwid_select = 0; + + /* Disable encryption */ + psa.psa_encryption_select = 0; + + /* Set to standard values: + * 0x04 for AT, + * 0x01 for MCA, + * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document) + */ + if (psa.psa_comp_number & 1) + psa.psa_thr_pre_set = 0x01; + else + psa.psa_thr_pre_set = 0x04; + psa.psa_quality_thr = 0x03; + + /* It is configured */ + psa.psa_conf_status |= 1; + +#ifdef USE_PSA_CONFIG + /* Write the psa. */ + psa_write(ioaddr, lp->hacr, + (char *) psa.psa_nwid - (char *) &psa, + (unsigned char *) psa.psa_nwid, 4); + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_thr_pre_set - (char *) &psa, + (unsigned char *) &psa.psa_thr_pre_set, 1); + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_quality_thr - (char *) &psa, + (unsigned char *) &psa.psa_quality_thr, 1); + psa_write(ioaddr, lp->hacr, + (char *) &psa.psa_conf_status - (char *) &psa, + (unsigned char *) &psa.psa_conf_status, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev, ioaddr, lp->hacr); +#endif + } + + /* Zero the mmc structure. */ + memset(&m, 0x00, sizeof(m)); + + /* Copy PSA info to the mmc. */ + m.mmw_netw_id_l = psa.psa_nwid[1]; + m.mmw_netw_id_h = psa.psa_nwid[0]; + + if (psa.psa_nwid_select & 1) + m.mmw_loopt_sel = 0x00; + else + m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID; + + memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, + sizeof(m.mmw_encr_key)); + + if (psa.psa_encryption_select) + m.mmw_encr_enable = + MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE; + else + m.mmw_encr_enable = 0; + + m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F; + m.mmw_quality_thr = psa.psa_quality_thr & 0x0F; + + /* + * Set default modem control parameters. + * See NCR document 407-0024326 Rev. A. + */ + m.mmw_jabber_enable = 0x01; + m.mmw_freeze = 0; + m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN; + m.mmw_ifs = 0x20; + m.mmw_mod_delay = 0x04; + m.mmw_jam_time = 0x38; + + m.mmw_des_io_invert = 0; + m.mmw_decay_prm = 0; + m.mmw_decay_updat_prm = 0; + + /* Write all info to MMC. */ + mmc_write(ioaddr, 0, (u8 *) & m, sizeof(m)); + + /* The following code starts the modem of the 2.00 frequency + * selectable cards at power on. It's not strictly needed for the + * following boots. + * The original patch was by Joe Finney for the PCMCIA driver, but + * I've cleaned it up a bit and added documentation. + * Thanks to Loeke Brederveld from Lucent for the info. + */ + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable) + * Does it work for everybody, especially old cards? */ + /* Note: WFREQSEL verifies that it is able to read a sensible + * frequency from EEPROM (address 0x00) and that MMR_FEE_STATUS_ID + * is 0xA (Xilinx version) or 0xB (Ariadne version). + * My test is more crude but does work. */ + if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { + /* We must download the frequency parameters to the + * synthesizers (from the EEPROM - area 1) + * Note: as the EEPROM is automatically decremented, we set the end + * if the area... */ + m.mmw_fee_addr = 0x0F; + m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; + mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m, + (unsigned char *) &m.mmw_fee_ctrl, 2); + + /* Wait until the download is finished. */ + fee_wait(ioaddr, 100, 100); + +#ifdef DEBUG_CONFIG_INFO + /* The frequency was in the last word downloaded. */ + mmc_read(ioaddr, (char *) &m.mmw_fee_data_l - (char *) &m, + (unsigned char *) &m.mmw_fee_data_l, 2); + + /* Print some info for the user. */ + printk(KERN_DEBUG + "%s: WaveLAN 2.00 recognised (frequency select). Current frequency = %ld\n", + dev->name, + ((m. + mmw_fee_data_h << 4) | (m.mmw_fee_data_l >> 4)) * + 5 / 2 + 24000L); +#endif + + /* We must now download the power adjust value (gain) to + * the synthesizers (from the EEPROM - area 7 - DAC). */ + m.mmw_fee_addr = 0x61; + m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; + mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m, + (unsigned char *) &m.mmw_fee_ctrl, 2); + + /* Wait until the download is finished. */ + } + /* if 2.00 card */ +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Construct the fd and rbd structures. + * Start the receive unit. + * (called by wv_hw_reset()) + */ +static inline int wv_ru_start(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + u16 scb_cs; + fd_t fd; + rbd_t rbd; + u16 rx; + u16 rx_next; + int i; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name); +#endif + + obram_read(ioaddr, scboff(OFFSET_SCB, scb_status), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + if ((scb_cs & SCB_ST_RUS) == SCB_ST_RUS_RDY) + return 0; + + lp->rx_head = OFFSET_RU; + + for (i = 0, rx = lp->rx_head; i < NRXBLOCKS; i++, rx = rx_next) { + rx_next = + (i == NRXBLOCKS - 1) ? lp->rx_head : rx + RXBLOCKZ; + + fd.fd_status = 0; + fd.fd_command = (i == NRXBLOCKS - 1) ? FD_COMMAND_EL : 0; + fd.fd_link_offset = rx_next; + fd.fd_rbd_offset = rx + sizeof(fd); + obram_write(ioaddr, rx, (unsigned char *) &fd, sizeof(fd)); + + rbd.rbd_status = 0; + rbd.rbd_next_rbd_offset = I82586NULL; + rbd.rbd_bufl = rx + sizeof(fd) + sizeof(rbd); + rbd.rbd_bufh = 0; + rbd.rbd_el_size = RBD_EL | (RBD_SIZE & MAXDATAZ); + obram_write(ioaddr, rx + sizeof(fd), + (unsigned char *) &rbd, sizeof(rbd)); + + lp->rx_last = rx; + } + + obram_write(ioaddr, scboff(OFFSET_SCB, scb_rfa_offset), + (unsigned char *) &lp->rx_head, sizeof(lp->rx_head)); + + scb_cs = SCB_CMD_RUC_GO; + obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + + set_chan_attn(ioaddr, lp->hacr); + + for (i = 1000; i > 0; i--) { + obram_read(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + if (scb_cs == 0) + break; + + udelay(10); + } + + if (i <= 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wavelan_ru_start(): board not accepting command.\n", + dev->name); +#endif + return -1; + } +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Initialise the transmit blocks. + * Start the command unit executing the NOP + * self-loop of the first transmit block. + * + * Here we create the list of send buffers used to transmit packets + * between the PC and the command unit. For each buffer, we create a + * buffer descriptor (pointing on the buffer), a transmit command + * (pointing to the buffer descriptor) and a NOP command. + * The transmit command is linked to the NOP, and the NOP to itself. + * When we will have finished executing the transmit command, we will + * then loop on the NOP. By releasing the NOP link to a new command, + * we may send another buffer. + * + * (called by wv_hw_reset()) + */ +static inline int wv_cu_start(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + int i; + u16 txblock; + u16 first_nop; + u16 scb_cs; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_cu_start()\n", dev->name); +#endif + + lp->tx_first_free = OFFSET_CU; + lp->tx_first_in_use = I82586NULL; + + for (i = 0, txblock = OFFSET_CU; + i < NTXBLOCKS; i++, txblock += TXBLOCKZ) { + ac_tx_t tx; + ac_nop_t nop; + tbd_t tbd; + unsigned short tx_addr; + unsigned short nop_addr; + unsigned short tbd_addr; + unsigned short buf_addr; + + tx_addr = txblock; + nop_addr = tx_addr + sizeof(tx); + tbd_addr = nop_addr + sizeof(nop); + buf_addr = tbd_addr + sizeof(tbd); + + tx.tx_h.ac_status = 0; + tx.tx_h.ac_command = acmd_transmit | AC_CFLD_I; + tx.tx_h.ac_link = nop_addr; + tx.tx_tbd_offset = tbd_addr; + obram_write(ioaddr, tx_addr, (unsigned char *) &tx, + sizeof(tx)); + + nop.nop_h.ac_status = 0; + nop.nop_h.ac_command = acmd_nop; + nop.nop_h.ac_link = nop_addr; + obram_write(ioaddr, nop_addr, (unsigned char *) &nop, + sizeof(nop)); + + tbd.tbd_status = TBD_STATUS_EOF; + tbd.tbd_next_bd_offset = I82586NULL; + tbd.tbd_bufl = buf_addr; + tbd.tbd_bufh = 0; + obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, + sizeof(tbd)); + } + + first_nop = + OFFSET_CU + (NTXBLOCKS - 1) * TXBLOCKZ + sizeof(ac_tx_t); + obram_write(ioaddr, scboff(OFFSET_SCB, scb_cbl_offset), + (unsigned char *) &first_nop, sizeof(first_nop)); + + scb_cs = SCB_CMD_CUC_GO; + obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + + set_chan_attn(ioaddr, lp->hacr); + + for (i = 1000; i > 0; i--) { + obram_read(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cs, sizeof(scb_cs)); + if (scb_cs == 0) + break; + + udelay(10); + } + + if (i <= 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wavelan_cu_start(): board not accepting command.\n", + dev->name); +#endif + return -1; + } + + lp->tx_n_in_use = 0; + netif_start_queue(dev); +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_cu_start()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * This routine does a standard configuration of the WaveLAN + * controller (i82586). + * + * It initialises the scp, iscp and scb structure + * The first two are just pointers to the next. + * The last one is used for basic configuration and for basic + * communication (interrupt status). + * + * (called by wv_hw_reset()) + */ +static inline int wv_82586_start(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + scp_t scp; /* system configuration pointer */ + iscp_t iscp; /* intermediate scp */ + scb_t scb; /* system control block */ + ach_t cb; /* Action command header */ + u8 zeroes[512]; + int i; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_82586_start()\n", dev->name); +#endif + + /* + * Clear the onboard RAM. + */ + memset(&zeroes[0], 0x00, sizeof(zeroes)); + for (i = 0; i < I82586_MEMZ; i += sizeof(zeroes)) + obram_write(ioaddr, i, &zeroes[0], sizeof(zeroes)); + + /* + * Construct the command unit structures: + * scp, iscp, scb, cb. + */ + memset(&scp, 0x00, sizeof(scp)); + scp.scp_sysbus = SCP_SY_16BBUS; + scp.scp_iscpl = OFFSET_ISCP; + obram_write(ioaddr, OFFSET_SCP, (unsigned char *) &scp, + sizeof(scp)); + + memset(&iscp, 0x00, sizeof(iscp)); + iscp.iscp_busy = 1; + iscp.iscp_offset = OFFSET_SCB; + obram_write(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp, + sizeof(iscp)); + + /* Our first command is to reset the i82586. */ + memset(&scb, 0x00, sizeof(scb)); + scb.scb_command = SCB_CMD_RESET; + scb.scb_cbl_offset = OFFSET_CU; + scb.scb_rfa_offset = OFFSET_RU; + obram_write(ioaddr, OFFSET_SCB, (unsigned char *) &scb, + sizeof(scb)); + + set_chan_attn(ioaddr, lp->hacr); + + /* Wait for command to finish. */ + for (i = 1000; i > 0; i--) { + obram_read(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp, + sizeof(iscp)); + + if (iscp.iscp_busy == (unsigned short) 0) + break; + + udelay(10); + } + + if (i <= 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wv_82586_start(): iscp_busy timeout.\n", + dev->name); +#endif + return -1; + } + + /* Check command completion. */ + for (i = 15; i > 0; i--) { + obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb, + sizeof(scb)); + + if (scb.scb_status == (SCB_ST_CX | SCB_ST_CNA)) + break; + + udelay(10); + } + + if (i <= 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wv_82586_start(): status: expected 0x%02x, got 0x%02x.\n", + dev->name, SCB_ST_CX | SCB_ST_CNA, scb.scb_status); +#endif + return -1; + } + + wv_ack(dev); + + /* Set the action command header. */ + memset(&cb, 0x00, sizeof(cb)); + cb.ac_command = AC_CFLD_EL | (AC_CFLD_CMD & acmd_diagnose); + cb.ac_link = OFFSET_CU; + obram_write(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb)); + + if (wv_synchronous_cmd(dev, "diag()") == -1) + return -1; + + obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb)); + if (cb.ac_status & AC_SFLD_FAIL) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wv_82586_start(): i82586 Self Test failed.\n", + dev->name); +#endif + return -1; + } +#ifdef DEBUG_I82586_SHOW + wv_scb_show(ioaddr); +#endif + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_82586_start()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * This routine does a standard configuration of the WaveLAN + * controller (i82586). + * + * This routine is a violent hack. We use the first free transmit block + * to make our configuration. In the buffer area, we create the three + * configuration commands (linked). We make the previous NOP point to + * the beginning of the buffer instead of the tx command. After, we go + * as usual to the NOP command. + * Note that only the last command (mc_set) will generate an interrupt. + * + * (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit()) + */ +static void wv_82586_config(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + unsigned short txblock; + unsigned short txpred; + unsigned short tx_addr; + unsigned short nop_addr; + unsigned short tbd_addr; + unsigned short cfg_addr; + unsigned short ias_addr; + unsigned short mcs_addr; + ac_tx_t tx; + ac_nop_t nop; + ac_cfg_t cfg; /* Configure action */ + ac_ias_t ias; /* IA-setup action */ + ac_mcs_t mcs; /* Multicast setup */ + struct dev_mc_list *dmi; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_82586_config()\n", dev->name); +#endif + + /* Check nothing bad has happened */ + if (lp->tx_n_in_use == (NTXBLOCKS - 1)) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO "%s: wv_82586_config(): Tx queue full.\n", + dev->name); +#endif + return; + } + + /* Calculate addresses of next block and previous block. */ + txblock = lp->tx_first_free; + txpred = txblock - TXBLOCKZ; + if (txpred < OFFSET_CU) + txpred += NTXBLOCKS * TXBLOCKZ; + lp->tx_first_free += TXBLOCKZ; + if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ) + lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ; + + lp->tx_n_in_use++; + + /* Calculate addresses of the different parts of the block. */ + tx_addr = txblock; + nop_addr = tx_addr + sizeof(tx); + tbd_addr = nop_addr + sizeof(nop); + cfg_addr = tbd_addr + sizeof(tbd_t); /* beginning of the buffer */ + ias_addr = cfg_addr + sizeof(cfg); + mcs_addr = ias_addr + sizeof(ias); + + /* + * Transmit command + */ + tx.tx_h.ac_status = 0xFFFF; /* Fake completion value */ + obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status), + (unsigned char *) &tx.tx_h.ac_status, + sizeof(tx.tx_h.ac_status)); + + /* + * NOP command + */ + nop.nop_h.ac_status = 0; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), + (unsigned char *) &nop.nop_h.ac_status, + sizeof(nop.nop_h.ac_status)); + nop.nop_h.ac_link = nop_addr; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), + (unsigned char *) &nop.nop_h.ac_link, + sizeof(nop.nop_h.ac_link)); + + /* Create a configure action. */ + memset(&cfg, 0x00, sizeof(cfg)); + + /* + * For Linux we invert AC_CFG_ALOC() so as to conform + * to the way that net packets reach us from above. + * (See also ac_tx_t.) + * + * Updated from Wavelan Manual WCIN085B + */ + cfg.cfg_byte_cnt = + AC_CFG_BYTE_CNT(sizeof(ac_cfg_t) - sizeof(ach_t)); + cfg.cfg_fifolim = AC_CFG_FIFOLIM(4); + cfg.cfg_byte8 = AC_CFG_SAV_BF(1) | AC_CFG_SRDY(0); + cfg.cfg_byte9 = AC_CFG_ELPBCK(0) | + AC_CFG_ILPBCK(0) | + AC_CFG_PRELEN(AC_CFG_PLEN_2) | + AC_CFG_ALOC(1) | AC_CFG_ADDRLEN(WAVELAN_ADDR_SIZE); + cfg.cfg_byte10 = AC_CFG_BOFMET(1) | + AC_CFG_ACR(6) | AC_CFG_LINPRIO(0); + cfg.cfg_ifs = 0x20; + cfg.cfg_slotl = 0x0C; + cfg.cfg_byte13 = AC_CFG_RETRYNUM(15) | AC_CFG_SLTTMHI(0); + cfg.cfg_byte14 = AC_CFG_FLGPAD(0) | + AC_CFG_BTSTF(0) | + AC_CFG_CRC16(0) | + AC_CFG_NCRC(0) | + AC_CFG_TNCRS(1) | + AC_CFG_MANCH(0) | + AC_CFG_BCDIS(0) | AC_CFG_PRM(lp->promiscuous); + cfg.cfg_byte15 = AC_CFG_ICDS(0) | + AC_CFG_CDTF(0) | AC_CFG_ICSS(0) | AC_CFG_CSTF(0); +/* + cfg.cfg_min_frm_len = AC_CFG_MNFRM(64); +*/ + cfg.cfg_min_frm_len = AC_CFG_MNFRM(8); + + cfg.cfg_h.ac_command = (AC_CFLD_CMD & acmd_configure); + cfg.cfg_h.ac_link = ias_addr; + obram_write(ioaddr, cfg_addr, (unsigned char *) &cfg, sizeof(cfg)); + + /* Set up the MAC address */ + memset(&ias, 0x00, sizeof(ias)); + ias.ias_h.ac_command = (AC_CFLD_CMD & acmd_ia_setup); + ias.ias_h.ac_link = mcs_addr; + memcpy(&ias.ias_addr[0], (unsigned char *) &dev->dev_addr[0], + sizeof(ias.ias_addr)); + obram_write(ioaddr, ias_addr, (unsigned char *) &ias, sizeof(ias)); + + /* Initialize adapter's Ethernet multicast addresses */ + memset(&mcs, 0x00, sizeof(mcs)); + mcs.mcs_h.ac_command = AC_CFLD_I | (AC_CFLD_CMD & acmd_mc_setup); + mcs.mcs_h.ac_link = nop_addr; + mcs.mcs_cnt = WAVELAN_ADDR_SIZE * lp->mc_count; + obram_write(ioaddr, mcs_addr, (unsigned char *) &mcs, sizeof(mcs)); + + /* Any address to set? */ + if (lp->mc_count) { + for (dmi = dev->mc_list; dmi; dmi = dmi->next) + outsw(PIOP1(ioaddr), (u16 *) dmi->dmi_addr, + WAVELAN_ADDR_SIZE >> 1); + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG + "%s: wv_82586_config(): set %d multicast addresses:\n", + dev->name, lp->mc_count); + for (dmi = dev->mc_list; dmi; dmi = dmi->next) + printk(KERN_DEBUG + " %02x:%02x:%02x:%02x:%02x:%02x\n", + dmi->dmi_addr[0], dmi->dmi_addr[1], + dmi->dmi_addr[2], dmi->dmi_addr[3], + dmi->dmi_addr[4], dmi->dmi_addr[5]); +#endif + } + + /* + * Overwrite the predecessor NOP link + * so that it points to the configure action. + */ + nop_addr = txpred + sizeof(tx); + nop.nop_h.ac_status = 0; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status), + (unsigned char *) &nop.nop_h.ac_status, + sizeof(nop.nop_h.ac_status)); + nop.nop_h.ac_link = cfg_addr; + obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link), + (unsigned char *) &nop.nop_h.ac_link, + sizeof(nop.nop_h.ac_link)); + + /* Job done, clear the flag */ + lp->reconfig_82586 = 0; + + if (lp->tx_first_in_use == I82586NULL) + lp->tx_first_in_use = txblock; + + if (lp->tx_n_in_use == (NTXBLOCKS - 1)) + netif_stop_queue(dev); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_82586_config()\n", dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * This routine, called by wavelan_close(), gracefully stops the + * WaveLAN controller (i82586). + * (called by wavelan_close()) + */ +static inline void wv_82586_stop(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + u16 scb_cmd; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_82586_stop()\n", dev->name); +#endif + + /* Suspend both command unit and receive unit. */ + scb_cmd = + (SCB_CMD_CUC & SCB_CMD_CUC_SUS) | (SCB_CMD_RUC & + SCB_CMD_RUC_SUS); + obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &scb_cmd, sizeof(scb_cmd)); + set_chan_attn(ioaddr, lp->hacr); + + /* No more interrupts */ + wv_ints_off(dev); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_82586_stop()\n", dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * Totally reset the WaveLAN and restart it. + * Performs the following actions: + * 1. A power reset (reset DMA) + * 2. Initialize the radio modem (using wv_mmc_init) + * 3. Reset & Configure LAN controller (using wv_82586_start) + * 4. Start the LAN controller's command unit + * 5. Start the LAN controller's receive unit + * (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open()) + */ +static int wv_hw_reset(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long ioaddr = dev->base_addr; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_hw_reset(dev=0x%x)\n", dev->name, + (unsigned int) dev); +#endif + + /* Increase the number of resets done. */ + lp->nresets++; + + wv_hacr_reset(ioaddr); + lp->hacr = HACR_DEFAULT; + + if ((wv_mmc_init(dev) < 0) || (wv_82586_start(dev) < 0)) + return -1; + + /* Enable the card to send interrupts. */ + wv_ints_on(dev); + + /* Start card functions */ + if (wv_cu_start(dev) < 0) + return -1; + + /* Setup the controller and parameters */ + wv_82586_config(dev); + + /* Finish configuration with the receive unit */ + if (wv_ru_start(dev) < 0) + return -1; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Check if there is a WaveLAN at the specific base address. + * As a side effect, this reads the MAC address. + * (called in wavelan_probe() and init_module()) + */ +static int wv_check_ioaddr(unsigned long ioaddr, u8 * mac) +{ + int i; /* Loop counter */ + + /* Check if the base address if available. */ + if (!request_region(ioaddr, sizeof(ha_t), "wavelan probe")) + return -EBUSY; /* ioaddr already used */ + + /* Reset host interface */ + wv_hacr_reset(ioaddr); + + /* Read the MAC address from the parameter storage area. */ + psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_univ_mac_addr), + mac, 6); + + release_region(ioaddr, sizeof(ha_t)); + + /* + * Check the first three octets of the address for the manufacturer's code. + * Note: if this can't find your WaveLAN card, you've got a + * non-NCR/AT&T/Lucent ISA card. See wavelan.p.h for detail on + * how to configure your card. + */ + for (i = 0; i < (sizeof(MAC_ADDRESSES) / sizeof(char) / 3); i++) + if ((mac[0] == MAC_ADDRESSES[i][0]) && + (mac[1] == MAC_ADDRESSES[i][1]) && + (mac[2] == MAC_ADDRESSES[i][2])) + return 0; + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_WARNING + "WaveLAN (0x%3X): your MAC address might be %02X:%02X:%02X.\n", + ioaddr, mac[0], mac[1], mac[2]); +#endif + return -ENODEV; +} + +/************************ INTERRUPT HANDLING ************************/ + +/* + * This function is the interrupt handler for the WaveLAN card. This + * routine will be called whenever: + */ +static irqreturn_t wavelan_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev; + unsigned long ioaddr; + net_local *lp; + u16 hasr; + u16 status; + u16 ack_cmd; + + dev = dev_id; + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name); +#endif + + lp = (net_local *) dev->priv; + ioaddr = dev->base_addr; + +#ifdef DEBUG_INTERRUPT_INFO + /* Check state of our spinlock */ + if(spin_is_locked(&lp->spinlock)) + printk(KERN_DEBUG + "%s: wavelan_interrupt(): spinlock is already locked !!!\n", + dev->name); +#endif + + /* Prevent reentrancy. We need to do that because we may have + * multiple interrupt handler running concurrently. + * It is safe because interrupts are disabled before acquiring + * the spinlock. */ + spin_lock(&lp->spinlock); + + /* We always had spurious interrupts at startup, but lately I + * saw them comming *between* the request_irq() and the + * spin_lock_irqsave() in wavelan_open(), so the spinlock + * protection is no enough. + * So, we also check lp->hacr that will tell us is we enabled + * irqs or not (see wv_ints_on()). + * We can't use netif_running(dev) because we depend on the + * proper processing of the irq generated during the config. */ + + /* Which interrupt it is ? */ + hasr = hasr_read(ioaddr); + +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_INFO + "%s: wavelan_interrupt(): hasr 0x%04x; hacr 0x%04x.\n", + dev->name, hasr, lp->hacr); +#endif + + /* Check modem interrupt */ + if ((hasr & HASR_MMC_INTR) && (lp->hacr & HACR_MMC_INT_ENABLE)) { + u8 dce_status; + + /* + * Interrupt from the modem management controller. + * This will clear it -- ignored for now. + */ + mmc_read(ioaddr, mmroff(0, mmr_dce_status), &dce_status, + sizeof(dce_status)); + +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO + "%s: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n", + dev->name, dce_status); +#endif + } + + /* Check if not controller interrupt */ + if (((hasr & HASR_82586_INTR) == 0) || + ((lp->hacr & HACR_82586_INT_ENABLE) == 0)) { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO + "%s: wavelan_interrupt(): interrupt not coming from i82586 - hasr 0x%04x.\n", + dev->name, hasr); +#endif + spin_unlock (&lp->spinlock); + return IRQ_NONE; + } + + /* Read interrupt data. */ + obram_read(ioaddr, scboff(OFFSET_SCB, scb_status), + (unsigned char *) &status, sizeof(status)); + + /* + * Acknowledge the interrupt(s). + */ + ack_cmd = status & SCB_ST_INT; + obram_write(ioaddr, scboff(OFFSET_SCB, scb_command), + (unsigned char *) &ack_cmd, sizeof(ack_cmd)); + set_chan_attn(ioaddr, lp->hacr); + +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG "%s: wavelan_interrupt(): status 0x%04x.\n", + dev->name, status); +#endif + + /* Command completed. */ + if ((status & SCB_ST_CX) == SCB_ST_CX) { +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG + "%s: wavelan_interrupt(): command completed.\n", + dev->name); +#endif + wv_complete(dev, ioaddr, lp); + } + + /* Frame received. */ + if ((status & SCB_ST_FR) == SCB_ST_FR) { +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG + "%s: wavelan_interrupt(): received packet.\n", + dev->name); +#endif + wv_receive(dev); + } + + /* Check the state of the command unit. */ + if (((status & SCB_ST_CNA) == SCB_ST_CNA) || + (((status & SCB_ST_CUS) != SCB_ST_CUS_ACTV) && + (netif_running(dev)))) { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO + "%s: wavelan_interrupt(): CU inactive -- restarting\n", + dev->name); +#endif + wv_hw_reset(dev); + } + + /* Check the state of the command unit. */ + if (((status & SCB_ST_RNR) == SCB_ST_RNR) || + (((status & SCB_ST_RUS) != SCB_ST_RUS_RDY) && + (netif_running(dev)))) { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO + "%s: wavelan_interrupt(): RU not ready -- restarting\n", + dev->name); +#endif + wv_hw_reset(dev); + } + + /* Release spinlock */ + spin_unlock (&lp->spinlock); + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name); +#endif + return IRQ_HANDLED; +} + +/*------------------------------------------------------------------*/ +/* + * Watchdog: when we start a transmission, a timer is set for us in the + * kernel. If the transmission completes, this timer is disabled. If + * the timer expires, we are called and we try to unlock the hardware. + */ +static void wavelan_watchdog(struct net_device * dev) +{ + net_local * lp = (net_local *)dev->priv; + u_long ioaddr = dev->base_addr; + unsigned long flags; + unsigned int nreaped; + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name); +#endif + +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n", + dev->name); +#endif + + /* Check that we came here for something */ + if (lp->tx_n_in_use <= 0) { + return; + } + + spin_lock_irqsave(&lp->spinlock, flags); + + /* Try to see if some buffers are not free (in case we missed + * an interrupt */ + nreaped = wv_complete(dev, ioaddr, lp); + +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG + "%s: wavelan_watchdog(): %d reaped, %d remain.\n", + dev->name, nreaped, lp->tx_n_in_use); +#endif + +#ifdef DEBUG_PSA_SHOW + { + psa_t psa; + psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); + wv_psa_show(&psa); + } +#endif +#ifdef DEBUG_MMC_SHOW + wv_mmc_show(dev); +#endif +#ifdef DEBUG_I82586_SHOW + wv_cu_show(dev); +#endif + + /* If no buffer has been freed */ + if (nreaped == 0) { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO + "%s: wavelan_watchdog(): cleanup failed, trying reset\n", + dev->name); +#endif + wv_hw_reset(dev); + } + + /* At this point, we should have some free Tx buffer ;-) */ + if (lp->tx_n_in_use < NTXBLOCKS - 1) + netif_wake_queue(dev); + + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name); +#endif +} + +/********************* CONFIGURATION CALLBACKS *********************/ +/* + * Here are the functions called by the Linux networking code (NET3) + * for initialization, configuration and deinstallations of the + * WaveLAN ISA hardware. + */ + +/*------------------------------------------------------------------*/ +/* + * Configure and start up the WaveLAN PCMCIA adaptor. + * Called by NET3 when it "opens" the device. + */ +static int wavelan_open(struct net_device * dev) +{ + net_local * lp = (net_local *)dev->priv; + unsigned long flags; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name, + (unsigned int) dev); +#endif + + /* Check irq */ + if (dev->irq == 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_WARNING "%s: wavelan_open(): no IRQ\n", + dev->name); +#endif + return -ENXIO; + } + + if (request_irq(dev->irq, &wavelan_interrupt, 0, "WaveLAN", dev) != 0) + { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_WARNING "%s: wavelan_open(): invalid IRQ\n", + dev->name); +#endif + return -EAGAIN; + } + + spin_lock_irqsave(&lp->spinlock, flags); + + if (wv_hw_reset(dev) != -1) { + netif_start_queue(dev); + } else { + free_irq(dev->irq, dev); +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wavelan_open(): impossible to start the card\n", + dev->name); +#endif + spin_unlock_irqrestore(&lp->spinlock, flags); + return -EAGAIN; + } + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Shut down the WaveLAN ISA card. + * Called by NET3 when it "closes" the device. + */ +static int wavelan_close(struct net_device * dev) +{ + net_local *lp = (net_local *) dev->priv; + unsigned long flags; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name, + (unsigned int) dev); +#endif + + netif_stop_queue(dev); + + /* + * Flush the Tx and disable Rx. + */ + spin_lock_irqsave(&lp->spinlock, flags); + wv_82586_stop(dev); + spin_unlock_irqrestore(&lp->spinlock, flags); + + free_irq(dev->irq, dev); + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Probe an I/O address, and if the WaveLAN is there configure the + * device structure + * (called by wavelan_probe() and via init_module()). + */ +static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr) +{ + u8 irq_mask; + int irq; + net_local *lp; + mac_addr mac; + int err; + + if (!request_region(ioaddr, sizeof(ha_t), "wavelan")) + return -EADDRINUSE; + + err = wv_check_ioaddr(ioaddr, mac); + if (err) + goto out; + + memcpy(dev->dev_addr, mac, 6); + + dev->base_addr = ioaddr; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: ->wavelan_config(dev=0x%x, ioaddr=0x%lx)\n", + dev->name, (unsigned int) dev, ioaddr); +#endif + + /* Check IRQ argument on command line. */ + if (dev->irq != 0) { + irq_mask = wv_irq_to_psa(dev->irq); + + if (irq_mask == 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_WARNING + "%s: wavelan_config(): invalid IRQ %d ignored.\n", + dev->name, dev->irq); +#endif + dev->irq = 0; + } else { +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG + "%s: wavelan_config(): changing IRQ to %d\n", + dev->name, dev->irq); +#endif + psa_write(ioaddr, HACR_DEFAULT, + psaoff(0, psa_int_req_no), &irq_mask, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev, ioaddr, HACR_DEFAULT); + wv_hacr_reset(ioaddr); + } + } + + psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_int_req_no), + &irq_mask, 1); + if ((irq = wv_psa_to_irq(irq_mask)) == -1) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_INFO + "%s: wavelan_config(): could not wavelan_map_irq(%d).\n", + dev->name, irq_mask); +#endif + err = -EAGAIN; + goto out; + } + + dev->irq = irq; + + dev->mem_start = 0x0000; + dev->mem_end = 0x0000; + dev->if_port = 0; + + /* Initialize device structures */ + memset(dev->priv, 0, sizeof(net_local)); + lp = (net_local *) dev->priv; + + /* Back link to the device structure. */ + lp->dev = dev; + /* Add the device at the beginning of the linked list. */ + lp->next = wavelan_list; + wavelan_list = lp; + + lp->hacr = HACR_DEFAULT; + + /* Multicast stuff */ + lp->promiscuous = 0; + lp->mc_count = 0; + + /* Init spinlock */ + spin_lock_init(&lp->spinlock); + + SET_MODULE_OWNER(dev); + dev->open = wavelan_open; + dev->stop = wavelan_close; + dev->hard_start_xmit = wavelan_packet_xmit; + dev->get_stats = wavelan_get_stats; + dev->set_multicast_list = &wavelan_set_multicast_list; + dev->tx_timeout = &wavelan_watchdog; + dev->watchdog_timeo = WATCHDOG_JIFFIES; +#ifdef SET_MAC_ADDRESS + dev->set_mac_address = &wavelan_set_mac_address; +#endif /* SET_MAC_ADDRESS */ + +#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */ + dev->wireless_handlers = &wavelan_handler_def; + lp->wireless_data.spy_data = &lp->spy_data; + dev->wireless_data = &lp->wireless_data; +#endif + + dev->mtu = WAVELAN_MTU; + + /* Display nice information. */ + wv_init_info(dev); + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: <-wavelan_config()\n", dev->name); +#endif + return 0; +out: + release_region(ioaddr, sizeof(ha_t)); + return err; +} + +/*------------------------------------------------------------------*/ +/* + * Check for a network adaptor of this type. Return '0' iff one + * exists. There seem to be different interpretations of + * the initial value of dev->base_addr. + * We follow the example in drivers/net/ne.c. + * (called in "Space.c") + */ +struct net_device * __init wavelan_probe(int unit) +{ + struct net_device *dev; + short base_addr; + int def_irq; + int i; + int r = 0; + +#ifdef STRUCT_CHECK + if (wv_struct_check() != (char *) NULL) { + printk(KERN_WARNING + "%s: wavelan_probe(): structure/compiler botch: \"%s\"\n", + dev->name, wv_struct_check()); + return -ENODEV; + } +#endif /* STRUCT_CHECK */ + + dev = alloc_etherdev(sizeof(net_local)); + if (!dev) + return ERR_PTR(-ENOMEM); + + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + base_addr = dev->base_addr; + def_irq = dev->irq; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG + "%s: ->wavelan_probe(dev=%p (base_addr=0x%x))\n", + dev->name, dev, (unsigned int) dev->base_addr); +#endif + + /* Don't probe at all. */ + if (base_addr < 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_WARNING + "%s: wavelan_probe(): invalid base address\n", + dev->name); +#endif + r = -ENXIO; + } else if (base_addr > 0x100) { /* Check a single specified location. */ + r = wavelan_config(dev, base_addr); +#ifdef DEBUG_CONFIG_INFO + if (r != 0) + printk(KERN_DEBUG + "%s: wavelan_probe(): no device at specified base address (0x%X) or address already in use\n", + dev->name, base_addr); +#endif + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: <-wavelan_probe()\n", dev->name); +#endif + } else { /* Scan all possible addresses of the WaveLAN hardware. */ + for (i = 0; i < NELS(iobase); i++) { + dev->irq = def_irq; + if (wavelan_config(dev, iobase[i]) == 0) { +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG + "%s: <-wavelan_probe()\n", + dev->name); +#endif + break; + } + } + if (i == NELS(iobase)) + r = -ENODEV; + } + if (r) + goto out; + r = register_netdev(dev); + if (r) + goto out1; + return dev; +out1: + release_region(dev->base_addr, sizeof(ha_t)); + wavelan_list = wavelan_list->next; +out: + free_netdev(dev); + return ERR_PTR(r); +} + +/****************************** MODULE ******************************/ +/* + * Module entry point: insertion and removal + */ + +#ifdef MODULE +/*------------------------------------------------------------------*/ +/* + * Insertion of the module + * I'm now quite proud of the multi-device support. + */ +int init_module(void) +{ + int ret = -EIO; /* Return error if no cards found */ + int i; + +#ifdef DEBUG_MODULE_TRACE + printk(KERN_DEBUG "-> init_module()\n"); +#endif + + /* If probing is asked */ + if (io[0] == 0) { +#ifdef DEBUG_CONFIG_ERROR + printk(KERN_WARNING + "WaveLAN init_module(): doing device probing (bad !)\n"); + printk(KERN_WARNING + "Specify base addresses while loading module to correct the problem\n"); +#endif + + /* Copy the basic set of address to be probed. */ + for (i = 0; i < NELS(iobase); i++) + io[i] = iobase[i]; + } + + + /* Loop on all possible base addresses. */ + i = -1; + while ((io[++i] != 0) && (i < NELS(io))) { + struct net_device *dev = alloc_etherdev(sizeof(net_local)); + if (!dev) + break; + if (name[i]) + strcpy(dev->name, name[i]); /* Copy name */ + dev->base_addr = io[i]; + dev->irq = irq[i]; + + /* Check if there is something at this base address. */ + if (wavelan_config(dev, io[i]) == 0) { + if (register_netdev(dev) != 0) { + release_region(dev->base_addr, sizeof(ha_t)); + wavelan_list = wavelan_list->next; + } else { + ret = 0; + continue; + } + } + free_netdev(dev); + } + +#ifdef DEBUG_CONFIG_ERROR + if (!wavelan_list) + printk(KERN_WARNING + "WaveLAN init_module(): no device found\n"); +#endif + +#ifdef DEBUG_MODULE_TRACE + printk(KERN_DEBUG "<- init_module()\n"); +#endif + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Removal of the module + */ +void cleanup_module(void) +{ +#ifdef DEBUG_MODULE_TRACE + printk(KERN_DEBUG "-> cleanup_module()\n"); +#endif + + /* Loop on all devices and release them. */ + while (wavelan_list) { + struct net_device *dev = wavelan_list->dev; + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG + "%s: cleanup_module(): removing device at 0x%x\n", + dev->name, (unsigned int) dev); +#endif + unregister_netdev(dev); + + release_region(dev->base_addr, sizeof(ha_t)); + wavelan_list = wavelan_list->next; + + free_netdev(dev); + } + +#ifdef DEBUG_MODULE_TRACE + printk(KERN_DEBUG "<- cleanup_module()\n"); +#endif +} +#endif /* MODULE */ +MODULE_LICENSE("GPL"); + +/* + * This software may only be used and distributed + * according to the terms of the GNU General Public License. + * + * This software was developed as a component of the + * Linux operating system. + * It is based on other device drivers and information + * either written or supplied by: + * Ajay Bakre (bakre@paul.rutgers.edu), + * Donald Becker (becker@scyld.com), + * Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com), + * Anders Klemets (klemets@it.kth.se), + * Vladimir V. Kolpakov (w@stier.koenig.ru), + * Marc Meertens (Marc.Meertens@Utrecht.NCR.com), + * Pauline Middelink (middelin@polyware.iaf.nl), + * Robert Morris (rtm@das.harvard.edu), + * Jean Tourrilhes (jt@hplb.hpl.hp.com), + * Girish Welling (welling@paul.rutgers.edu), + * + * Thanks go also to: + * James Ashton (jaa101@syseng.anu.edu.au), + * Alan Cox (alan@redhat.com), + * Allan Creighton (allanc@cs.usyd.edu.au), + * Matthew Geier (matthew@cs.usyd.edu.au), + * Remo di Giovanni (remo@cs.usyd.edu.au), + * Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de), + * Vipul Gupta (vgupta@cs.binghamton.edu), + * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), + * Tim Nicholson (tim@cs.usyd.edu.au), + * Ian Parkin (ian@cs.usyd.edu.au), + * John Rosenberg (johnr@cs.usyd.edu.au), + * George Rossi (george@phm.gov.au), + * Arthur Scott (arthur@cs.usyd.edu.au), + * Peter Storey, + * for their assistance and advice. + * + * Please send bug reports, updates, comments to: + * + * Bruce Janson Email: bruce@cs.usyd.edu.au + * Basser Department of Computer Science Phone: +61-2-9351-3423 + * University of Sydney, N.S.W., 2006, AUSTRALIA Fax: +61-2-9351-3838 + */ diff --git a/drivers/net/wireless/wavelan.h b/drivers/net/wireless/wavelan.h new file mode 100644 index 00000000000..27172cde5a3 --- /dev/null +++ b/drivers/net/wireless/wavelan.h @@ -0,0 +1,370 @@ +/* + * WaveLAN ISA driver + * + * Jean II - HPLB '96 + * + * Reorganisation and extension of the driver. + * Original copyright follows. See wavelan.p.h for details. + * + * This file contains the declarations for the WaveLAN hardware. Note that + * the WaveLAN ISA includes a i82586 controller (see definitions in + * file i82586.h). + * + * The main difference between the ISA hardware and the PCMCIA one is + * the Ethernet controller (i82586 instead of i82593). + * The i82586 allows multiple transmit buffers. The PSA needs to be accessed + * through the host interface. + */ + +#ifndef _WAVELAN_H +#define _WAVELAN_H + +/************************** MAGIC NUMBERS ***************************/ + +/* Detection of the WaveLAN card is done by reading the MAC + * address from the card and checking it. If you have a non-AT&T + * product (OEM, like DEC RoamAbout, Digital Ocean, or Epson), + * you might need to modify this part to accommodate your hardware. + */ +static const char MAC_ADDRESSES[][3] = +{ + { 0x08, 0x00, 0x0E }, /* AT&T WaveLAN (standard) & DEC RoamAbout */ + { 0x08, 0x00, 0x6A }, /* AT&T WaveLAN (alternate) */ + { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */ + { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */ + /* Add your card here and send me the patch! */ +}; + +#define WAVELAN_ADDR_SIZE 6 /* Size of a MAC address */ + +#define WAVELAN_MTU 1500 /* Maximum size of WaveLAN packet */ + +#define MAXDATAZ (WAVELAN_ADDR_SIZE + WAVELAN_ADDR_SIZE + 2 + WAVELAN_MTU) + +/* + * Constants used to convert channels to frequencies + */ + +/* Frequency available in the 2.0 modem, in units of 250 kHz + * (as read in the offset register of the dac area). + * Used to map channel numbers used by `wfreqsel' to frequencies + */ +static const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, + 0xD0, 0xF0, 0xF8, 0x150 }; + +/* Frequencies of the 1.0 modem (fixed frequencies). + * Use to map the PSA `subband' to a frequency + * Note : all frequencies apart from the first one need to be multiplied by 10 + */ +static const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; + + + +/*************************** PC INTERFACE ****************************/ + +/* + * Host Adaptor structure. + * (base is board port address). + */ +typedef union hacs_u hacs_u; +union hacs_u +{ + unsigned short hu_command; /* Command register */ +#define HACR_RESET 0x0001 /* Reset board */ +#define HACR_CA 0x0002 /* Set Channel Attention for 82586 */ +#define HACR_16BITS 0x0004 /* 16-bit operation (0 => 8bits) */ +#define HACR_OUT0 0x0008 /* General purpose output pin 0 */ + /* not used - must be 1 */ +#define HACR_OUT1 0x0010 /* General purpose output pin 1 */ + /* not used - must be 1 */ +#define HACR_82586_INT_ENABLE 0x0020 /* Enable 82586 interrupts */ +#define HACR_MMC_INT_ENABLE 0x0040 /* Enable MMC interrupts */ +#define HACR_INTR_CLR_ENABLE 0x0080 /* Enable interrupt status read/clear */ + unsigned short hu_status; /* Status Register */ +#define HASR_82586_INTR 0x0001 /* Interrupt request from 82586 */ +#define HASR_MMC_INTR 0x0002 /* Interrupt request from MMC */ +#define HASR_MMC_BUSY 0x0004 /* MMC busy indication */ +#define HASR_PSA_BUSY 0x0008 /* LAN parameter storage area busy */ +}; + +typedef struct ha_t ha_t; +struct ha_t +{ + hacs_u ha_cs; /* Command and status registers */ +#define ha_command ha_cs.hu_command +#define ha_status ha_cs.hu_status + unsigned short ha_mmcr; /* Modem Management Ctrl Register */ + unsigned short ha_pior0; /* Program I/O Address Register Port 0 */ + unsigned short ha_piop0; /* Program I/O Port 0 */ + unsigned short ha_pior1; /* Program I/O Address Register Port 1 */ + unsigned short ha_piop1; /* Program I/O Port 1 */ + unsigned short ha_pior2; /* Program I/O Address Register Port 2 */ + unsigned short ha_piop2; /* Program I/O Port 2 */ +}; + +#define HA_SIZE 16 + +#define hoff(p,f) (unsigned short)((void *)(&((ha_t *)((void *)0 + (p)))->f) - (void *)0) +#define HACR(p) hoff(p, ha_command) +#define HASR(p) hoff(p, ha_status) +#define MMCR(p) hoff(p, ha_mmcr) +#define PIOR0(p) hoff(p, ha_pior0) +#define PIOP0(p) hoff(p, ha_piop0) +#define PIOR1(p) hoff(p, ha_pior1) +#define PIOP1(p) hoff(p, ha_piop1) +#define PIOR2(p) hoff(p, ha_pior2) +#define PIOP2(p) hoff(p, ha_piop2) + +/* + * Program I/O Mode Register values. + */ +#define STATIC_PIO 0 /* Mode 1: static mode */ + /* RAM access ??? */ +#define AUTOINCR_PIO 1 /* Mode 2: auto increment mode */ + /* RAM access ??? */ +#define AUTODECR_PIO 2 /* Mode 3: auto decrement mode */ + /* RAM access ??? */ +#define PARAM_ACCESS_PIO 3 /* Mode 4: LAN parameter access mode */ + /* Parameter access. */ +#define PIO_MASK 3 /* register mask */ +#define PIOM(cmd,piono) ((u_short)cmd << 10 << (piono * 2)) + +#define HACR_DEFAULT (HACR_OUT0 | HACR_OUT1 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2)) +#define HACR_INTRON (HACR_82586_INT_ENABLE | HACR_MMC_INT_ENABLE | HACR_INTR_CLR_ENABLE) + +/************************** MEMORY LAYOUT **************************/ + +/* + * Onboard 64 k RAM layout. + * (Offsets from 0x0000.) + */ +#define OFFSET_RU 0x0000 /* 75% memory */ +#define OFFSET_CU 0xC000 /* 25% memory */ +#define OFFSET_SCB (OFFSET_ISCP - sizeof(scb_t)) +#define OFFSET_ISCP (OFFSET_SCP - sizeof(iscp_t)) +#define OFFSET_SCP I82586_SCP_ADDR + +#define RXBLOCKZ (sizeof(fd_t) + sizeof(rbd_t) + MAXDATAZ) +#define TXBLOCKZ (sizeof(ac_tx_t) + sizeof(ac_nop_t) + sizeof(tbd_t) + MAXDATAZ) + +#define NRXBLOCKS ((OFFSET_CU - OFFSET_RU) / RXBLOCKZ) +#define NTXBLOCKS ((OFFSET_SCB - OFFSET_CU) / TXBLOCKZ) + +/********************** PARAMETER STORAGE AREA **********************/ + +/* + * Parameter Storage Area (PSA). + */ +typedef struct psa_t psa_t; +struct psa_t +{ + unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */ + unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */ + unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */ + unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */ + unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */ + unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */ + unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */ + unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */ + unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */ + unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */ + + unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */ + unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */ + unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */ +#define PSA_UNIVERSAL 0 /* Universal (factory) */ +#define PSA_LOCAL 1 /* Local */ + unsigned char psa_comp_number; /* [0x1D] Compatibility Number: */ +#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */ +#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */ +#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */ +#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */ +#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */ + unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */ + unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */ +#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */ + unsigned char psa_subband; /* [0x20] Subband */ +#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */ +#define PSA_SUBBAND_2425 1 /* 2425 MHz */ +#define PSA_SUBBAND_2460 2 /* 2460 MHz */ +#define PSA_SUBBAND_2484 3 /* 2484 MHz */ +#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */ + unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */ + unsigned char psa_mod_delay; /* [0x22] Modem Delay (?) (reserved) */ + unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */ + unsigned char psa_nwid_select; /* [0x25] Network ID Select On/Off */ + unsigned char psa_encryption_select; /* [0x26] Encryption On/Off */ + unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */ + unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */ + unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */ + unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */ + unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */ + unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/ + unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */ + unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */ +}; + +#define PSA_SIZE 64 + +/* Calculate offset of a field in the above structure. + * Warning: only even addresses are used. */ +#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL)) + +/******************** MODEM MANAGEMENT INTERFACE ********************/ + +/* + * Modem Management Controller (MMC) write structure. + */ +typedef struct mmw_t mmw_t; +struct mmw_t +{ + unsigned char mmw_encr_key[8]; /* encryption key */ + unsigned char mmw_encr_enable; /* Enable or disable encryption. */ +#define MMW_ENCR_ENABLE_MODE 0x02 /* mode of security option */ +#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option. */ + unsigned char mmw_unused0[1]; /* unused */ + unsigned char mmw_des_io_invert; /* encryption option */ +#define MMW_DES_IO_INVERT_RES 0x0F /* reserved */ +#define MMW_DES_IO_INVERT_CTRL 0xF0 /* control (?) (set to 0) */ + unsigned char mmw_unused1[5]; /* unused */ + unsigned char mmw_loopt_sel; /* looptest selection */ +#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* Disable NWID filtering. */ +#define MMW_LOOPT_SEL_INT 0x20 /* Activate Attention Request. */ +#define MMW_LOOPT_SEL_LS 0x10 /* looptest, no collision avoidance */ +#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */ +#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */ +#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */ +#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */ + unsigned char mmw_jabber_enable; /* jabber timer enable */ + /* Abort transmissions > 200 ms */ + unsigned char mmw_freeze; /* freeze or unfreeze signal level */ + /* 0 : signal level & qual updated for every new message, 1 : frozen */ + unsigned char mmw_anten_sel; /* antenna selection */ +#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */ +#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */ + unsigned char mmw_ifs; /* inter frame spacing */ + /* min time between transmission in bit periods (.5 us) - bit 0 ignored */ + unsigned char mmw_mod_delay; /* modem delay (synchro) */ + unsigned char mmw_jam_time; /* jamming time (after collision) */ + unsigned char mmw_unused2[1]; /* unused */ + unsigned char mmw_thr_pre_set; /* level threshold preset */ + /* Discard all packet with signal < this value (4) */ + unsigned char mmw_decay_prm; /* decay parameters */ + unsigned char mmw_decay_updat_prm; /* decay update parameters */ + unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */ + /* Discard all packet with quality < this value (3) */ + unsigned char mmw_netw_id_l; /* NWID low order byte */ + unsigned char mmw_netw_id_h; /* NWID high order byte */ + /* Network ID or Domain : create virtual net on the air */ + + /* 2.0 Hardware extension - frequency selection support */ + unsigned char mmw_mode_select; /* for analog tests (set to 0) */ + unsigned char mmw_unused3[1]; /* unused */ + unsigned char mmw_fee_ctrl; /* frequency EEPROM control */ +#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions. */ +#define MMW_FEE_CTRL_DWLD 0x08 /* Download EEPROM to mmc. */ +#define MMW_FEE_CTRL_CMD 0x07 /* EEPROM commands: */ +#define MMW_FEE_CTRL_READ 0x06 /* Read */ +#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */ +#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address. */ +#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses. */ +#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */ +#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */ +#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */ +#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers. */ +#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write address in protect register */ +#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */ + /* Never issue the PRDS command: it's irreversible! */ + + unsigned char mmw_fee_addr; /* EEPROM address */ +#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel. */ +#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */ +#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */ +#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */ +#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */ +#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */ + + unsigned char mmw_fee_data_l; /* Write data to EEPROM. */ + unsigned char mmw_fee_data_h; /* high octet */ + unsigned char mmw_ext_ant; /* Setting for external antenna */ +#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */ +#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */ +#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */ +#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */ +#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */ +}; + +#define MMW_SIZE 37 + +#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0) + +/* + * Modem Management Controller (MMC) read structure. + */ +typedef struct mmr_t mmr_t; +struct mmr_t +{ + unsigned char mmr_unused0[8]; /* unused */ + unsigned char mmr_des_status; /* encryption status */ + unsigned char mmr_des_avail; /* encryption available (0x55 read) */ +#define MMR_DES_AVAIL_DES 0x55 /* DES available */ +#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */ + unsigned char mmr_des_io_invert; /* des I/O invert register */ + unsigned char mmr_unused1[5]; /* unused */ + unsigned char mmr_dce_status; /* DCE status */ +#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */ +#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */ +#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */ +#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */ +#define MMR_DCE_STATUS 0x0F /* mask to get the bits */ + unsigned char mmr_dsp_id; /* DSP ID (AA = Daedalus rev A) */ + unsigned char mmr_unused2[2]; /* unused */ + unsigned char mmr_correct_nwid_l; /* # of correct NWIDs rxd (low) */ + unsigned char mmr_correct_nwid_h; /* # of correct NWIDs rxd (high) */ + /* Warning: read high-order octet first! */ + unsigned char mmr_wrong_nwid_l; /* # of wrong NWIDs rxd (low) */ + unsigned char mmr_wrong_nwid_h; /* # of wrong NWIDs rxd (high) */ + unsigned char mmr_thr_pre_set; /* level threshold preset */ +#define MMR_THR_PRE_SET 0x3F /* level threshold preset */ +#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */ + unsigned char mmr_signal_lvl; /* signal level */ +#define MMR_SIGNAL_LVL 0x3F /* signal level */ +#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */ + unsigned char mmr_silence_lvl; /* silence level (noise) */ +#define MMR_SILENCE_LVL 0x3F /* silence level */ +#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */ + unsigned char mmr_sgnl_qual; /* signal quality */ +#define MMR_SGNL_QUAL 0x0F /* signal quality */ +#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */ + unsigned char mmr_netw_id_l; /* NWID low order byte (?) */ + unsigned char mmr_unused3[3]; /* unused */ + + /* 2.0 Hardware extension - frequency selection support */ + unsigned char mmr_fee_status; /* Status of frequency EEPROM */ +#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision ID */ +#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */ +#define MMR_FEE_STATUS_BUSY 0x04 /* EEPROM busy */ + unsigned char mmr_unused4[1]; /* unused */ + unsigned char mmr_fee_data_l; /* Read data from EEPROM (low) */ + unsigned char mmr_fee_data_h; /* Read data from EEPROM (high) */ +}; + +#define MMR_SIZE 36 + +#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0) + +/* Make the two above structures one */ +typedef union mm_t +{ + struct mmw_t w; /* Write to the mmc */ + struct mmr_t r; /* Read from the mmc */ +} mm_t; + +#endif /* _WAVELAN_H */ + +/* + * This software may only be used and distributed + * according to the terms of the GNU General Public License. + * + * For more details, see wavelan.c. + */ diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h new file mode 100644 index 00000000000..509ff22a6ca --- /dev/null +++ b/drivers/net/wireless/wavelan.p.h @@ -0,0 +1,716 @@ +/* + * WaveLAN ISA driver + * + * Jean II - HPLB '96 + * + * Reorganisation and extension of the driver. + * + * This file contains all definitions and declarations necessary for the + * WaveLAN ISA driver. This file is a private header, so it should + * be included only in wavelan.c! + */ + +#ifndef WAVELAN_P_H +#define WAVELAN_P_H + +/************************** DOCUMENTATION ***************************/ +/* + * This driver provides a Linux interface to the WaveLAN ISA hardware. + * The WaveLAN is a product of Lucent (http://www.wavelan.com/). + * This division was formerly part of NCR and then AT&T. + * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean. + * + * To learn how to use this driver, read the NET3 HOWTO. + * If you want to exploit the many other functionalities, read the comments + * in the code. + * + * This driver is the result of the effort of many people (see below). + */ + +/* ------------------------ SPECIFIC NOTES ------------------------ */ +/* + * Web page + * -------- + * I try to maintain a web page with the Wireless LAN Howto at : + * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html + * + * SMP + * --- + * We now are SMP compliant (I eventually fixed the remaining bugs). + * The driver has been tested on a dual P6-150 and survived my usual + * set of torture tests. + * Anyway, I spent enough time chasing interrupt re-entrancy during + * errors or reconfigure, and I designed the locked/unlocked sections + * of the driver with great care, and with the recent addition of + * the spinlock (thanks to the new API), we should be quite close to + * the truth. + * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), + * but better safe than sorry (especially at 2 Mb/s ;-). + * + * I have also looked into disabling only our interrupt on the card + * (via HACR) instead of all interrupts in the processor (via cli), + * so that other driver are not impacted, and it look like it's + * possible, but it's very tricky to do right (full of races). As + * the gain would be mostly for SMP systems, it can wait... + * + * Debugging and options + * --------------------- + * You will find below a set of '#define" allowing a very fine control + * on the driver behaviour and the debug messages printed. + * The main options are : + * o SET_PSA_CRC, to have your card correctly recognised by + * an access point and the Point-to-Point diagnostic tool. + * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) + * (otherwise we always start afresh with some defaults) + * + * wavelan.o is too darned big + * --------------------------- + * That's true! There is a very simple way to reduce the driver + * object by 33%! Comment out the following line: + * #include <linux/wireless.h> + * Other compile options can also reduce the size of it... + * + * MAC address and hardware detection: + * ----------------------------------- + * The detection code for the WaveLAN checks that the first three + * octets of the MAC address fit the company code. This type of + * detection works well for AT&T cards (because the AT&T code is + * hardcoded in wavelan.h), but of course will fail for other + * manufacturers. + * + * If you are sure that your card is derived from the WaveLAN, + * here is the way to configure it: + * 1) Get your MAC address + * a) With your card utilities (wfreqsel, instconf, etc.) + * b) With the driver: + * o compile the kernel with DEBUG_CONFIG_INFO enabled + * o Boot and look the card messages + * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h) + * 3) Compile and verify + * 4) Send me the MAC code. I will include it in the next version. + * + */ + +/* --------------------- WIRELESS EXTENSIONS --------------------- */ +/* + * This driver is the first to support "wireless extensions". + * This set of extensions provides a standard way to control the wireless + * characteristics of the hardware. Applications such as mobile IP may + * take advantage of it. + * + * You will need to enable the CONFIG_NET_RADIO define in the kernel + * configuration to enable the wireless extensions (this is the one + * giving access to the radio network device choice). + * + * It might also be a good idea as well to fetch the wireless tools to + * configure the device and play a bit. + */ + +/* ---------------------------- FILES ---------------------------- */ +/* + * wavelan.c: actual code for the driver: C functions + * + * wavelan.p.h: private header: local types and variables for driver + * + * wavelan.h: description of the hardware interface and structs + * + * i82586.h: description of the Ethernet controller + */ + +/* --------------------------- HISTORY --------------------------- */ +/* + * This is based on information in the drivers' headers. It may not be + * accurate, and I guarantee only my best effort. + * + * The history of the WaveLAN drivers is as complicated as the history of + * the WaveLAN itself (NCR -> AT&T -> Lucent). + * + * It all started with Anders Klemets <klemets@paul.rutgers.edu> + * writing a WaveLAN ISA driver for the Mach microkernel. Girish + * Welling <welling@paul.rutgers.edu> had also worked on it. + * Keith Moore modified this for the PCMCIA hardware. + * + * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI + * and added specific PCMCIA support (there is currently no equivalent + * of the PCMCIA package under BSD). + * + * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD. + * + * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux. + * + * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver + * (with help of the BSDI PCMCIA driver) for PCMCIA. + * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work. + * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start + * 2.00 cards correctly (2.4 GHz with frequency selection). + * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his + * PCMCIA package (and bug corrections). + * + * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some + * patches to the PCMCIA driver. Later, I added code in the ISA driver + * for Wireless Extensions and full support of frequency selection + * cards. Then, I did the same to the PCMCIA driver, and did some + * reorganisation. Finally, I came back to the ISA driver to + * upgrade it at the same level as the PCMCIA one and reorganise + * the code. + * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me + * much needed information on the WaveLAN hardware. + */ + +/* The original copyrights and literature mention others' names and + * credits. I don't know what their part in this development was. + */ + +/* By the way, for the copyright and legal stuff: + * almost everybody wrote code under the GNU or BSD license (or similar), + * and want their original copyright to remain somewhere in the + * code (for myself, I go with the GPL). + * Nobody wants to take responsibility for anything, except the fame. + */ + +/* --------------------------- CREDITS --------------------------- */ +/* + * This software was developed as a component of the + * Linux operating system. + * It is based on other device drivers and information + * either written or supplied by: + * Ajay Bakre <bakre@paul.rutgers.edu>, + * Donald Becker <becker@cesdis.gsfc.nasa.gov>, + * Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>, + * Brent Elphick <belphick@uwaterloo.ca>, + * Anders Klemets <klemets@it.kth.se>, + * Vladimir V. Kolpakov <w@stier.koenig.ru>, + * Marc Meertens <Marc.Meertens@Utrecht.NCR.com>, + * Pauline Middelink <middelin@polyware.iaf.nl>, + * Robert Morris <rtm@das.harvard.edu>, + * Jean Tourrilhes <jt@hpl.hp.com>, + * Girish Welling <welling@paul.rutgers.edu>, + * Clark Woodworth <clark@hiway1.exit109.com> + * Yongguang Zhang <ygz@isl.hrl.hac.com> + * + * Thanks go also to: + * James Ashton <jaa101@syseng.anu.edu.au>, + * Alan Cox <alan@redhat.com>, + * Allan Creighton <allanc@cs.usyd.edu.au>, + * Matthew Geier <matthew@cs.usyd.edu.au>, + * Remo di Giovanni <remo@cs.usyd.edu.au>, + * Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>, + * Vipul Gupta <vgupta@cs.binghamton.edu>, + * Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>, + * Tim Nicholson <tim@cs.usyd.edu.au>, + * Ian Parkin <ian@cs.usyd.edu.au>, + * John Rosenberg <johnr@cs.usyd.edu.au>, + * George Rossi <george@phm.gov.au>, + * Arthur Scott <arthur@cs.usyd.edu.au>, + * Stanislav Sinyagin <stas@isf.ru> + * and Peter Storey for their assistance and advice. + * + * Additional Credits: + * + * My development has been done initially under Debian 1.1 (Linux 2.0.x) + * and now under Debian 2.2, initially with an HP Vectra XP/60, and now + * an HP Vectra XP/90. + * + */ + +/* ------------------------- IMPROVEMENTS ------------------------- */ +/* + * I proudly present: + * + * Changes made in first pre-release: + * ---------------------------------- + * - reorganisation of the code, function name change + * - creation of private header (wavelan.p.h) + * - reorganised debug messages + * - more comments, history, etc. + * - mmc_init: configure the PSA if not done + * - mmc_init: correct default value of level threshold for PCMCIA + * - mmc_init: 2.00 detection better code for 2.00 initialization + * - better info at startup + * - IRQ setting (note: this setting is permanent) + * - watchdog: change strategy (and solve module removal problems) + * - add wireless extensions (ioctl and get_wireless_stats) + * get/set nwid/frequency on fly, info for /proc/net/wireless + * - more wireless extensions: SETSPY and GETSPY + * - make wireless extensions optional + * - private ioctl to set/get quality and level threshold, histogram + * - remove /proc/net/wavelan + * - suppress useless stuff from lp (net_local) + * - kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) + * - add message level (debug stuff in /var/adm/debug and errors not + * displayed at console and still in /var/adm/messages) + * - multi device support + * - start fixing the probe (init code) + * - more inlines + * - man page + * - many other minor details and cleanups + * + * Changes made in second pre-release: + * ----------------------------------- + * - clean up init code (probe and module init) + * - better multiple device support (module) + * - name assignment (module) + * + * Changes made in third pre-release: + * ---------------------------------- + * - be more conservative on timers + * - preliminary support for multicast (I still lack some details) + * + * Changes made in fourth pre-release: + * ----------------------------------- + * - multicast (revisited and finished) + * - avoid reset in set_multicast_list (a really big hack) + * if somebody could apply this code for other i82586 based drivers + * - share onboard memory 75% RU and 25% CU (instead of 50/50) + * + * Changes made for release in 2.1.15: + * ----------------------------------- + * - change the detection code for multi manufacturer code support + * + * Changes made for release in 2.1.17: + * ----------------------------------- + * - update to wireless extensions changes + * - silly bug in card initial configuration (psa_conf_status) + * + * Changes made for release in 2.1.27 & 2.0.30: + * -------------------------------------------- + * - small bug in debug code (probably not the last one...) + * - remove extern keyword for wavelan_probe() + * - level threshold is now a standard wireless extension (version 4 !) + * - modules parameters types (new module interface) + * + * Changes made for release in 2.1.36: + * ----------------------------------- + * - byte count stats (courtesy of David Hinds) + * - remove dev_tint stuff (courtesy of David Hinds) + * - encryption setting from Brent Elphick (thanks a lot!) + * - 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) + * + * Other changes (not by me) : + * ------------------------- + * - Spelling and gramar "rectification". + * + * Changes made for release in 2.0.37 & 2.2.2 : + * ------------------------------------------ + * - Correct status in /proc/net/wireless + * - Set PSA CRC to make PtP diagnostic tool happy (Bob Gray) + * - Module init code don't fail if we found at least one card in + * the address list (Karlis Peisenieks) + * - Missing parenthesis (Christopher Peterson) + * - Correct i82586 configuration parameters + * - Encryption initialisation bug (Robert McCormack) + * - New mac addresses detected in the probe + * - Increase watchdog for busy environments + * + * Changes made for release in 2.0.38 & 2.2.7 : + * ------------------------------------------ + * - Correct the reception logic to better report errors and avoid + * sending bogus packet up the stack + * - Delay RU config to avoid corrupting first received packet + * - Change config completion code (to actually check something) + * - Avoid reading out of bound in skbuf to transmit + * - Rectify a lot of (useless) debugging code + * - Change the way to `#ifdef SET_PSA_CRC' + * + * Changes made for release in 2.2.11 & 2.3.13 : + * ------------------------------------------- + * - Change e-mail and web page addresses + * - Watchdog timer is now correctly expressed in HZ, not in jiffies + * - Add channel number to the list of frequencies in range + * - Add the (short) list of bit-rates in range + * - Developp a new sensitivity... (sens.value & sens.fixed) + * + * Changes made for release in 2.2.14 & 2.3.23 : + * ------------------------------------------- + * - Fix check for root permission (break instead of exit) + * - New nwid & encoding setting (Wireless Extension 9) + * + * Changes made for release in 2.3.49 : + * ---------------------------------- + * - Indentation reformating (Alan) + * - Update to new network API (softnet - 2.3.43) : + * o replace dev->tbusy (Alan) + * o replace dev->tstart (Alan) + * o remove dev->interrupt (Alan) + * o add SMP locking via spinlock in splxx (me) + * o add spinlock in interrupt handler (me) + * o use kernel watchdog instead of ours (me) + * o increase watchdog timeout (kernel is more sensitive) (me) + * o verify that all the changes make sense and work (me) + * - Fixup a potential gotcha when reconfiguring and thighten a bit + * the interactions with Tx queue. + * + * Changes made for release in 2.4.0 : + * --------------------------------- + * - Fix spinlock stupid bugs that I left in. The driver is now SMP + * compliant and doesn't lockup at startup. + * + * Changes made for release in 2.5.2 : + * --------------------------------- + * - Use new driver API for Wireless Extensions : + * o got rid of wavelan_ioctl() + * o use a bunch of iw_handler instead + * + * Changes made for release in 2.5.35 : + * ---------------------------------- + * - Set dev->trans_start to avoid filling the logs + * - Handle better spurious/bogus interrupt + * - Avoid deadlocks in mmc_out()/mmc_in() + * + * Wishes & dreams: + * ---------------- + * - roaming (see Pcmcia driver) + */ + +/***************************** INCLUDES *****************************/ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/stat.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/init.h> + +#include <linux/wireless.h> /* Wireless extensions */ +#include <net/iw_handler.h> /* Wireless handlers */ + +/* WaveLAN declarations */ +#include "i82586.h" +#include "wavelan.h" + +/************************** DRIVER OPTIONS **************************/ +/* + * `#define' or `#undef' the following constant to change the behaviour + * of the driver... + */ +#undef SET_PSA_CRC /* Calculate and set the CRC on PSA (slower) */ +#define USE_PSA_CONFIG /* Use info from the PSA. */ +#undef STRUCT_CHECK /* Verify padding of structures. */ +#undef EEPROM_IS_PROTECTED /* doesn't seem to be necessary */ +#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */ +#undef SET_MAC_ADDRESS /* Experimental */ + +#ifdef WIRELESS_EXT /* If wireless extensions exist in the kernel */ +/* Warning: this stuff will slow down the driver. */ +#define WIRELESS_SPY /* Enable spying addresses. */ +#undef HISTOGRAM /* Enable histogram of signal level. */ +#endif + +/****************************** DEBUG ******************************/ + +#undef DEBUG_MODULE_TRACE /* module insertion/removal */ +#undef DEBUG_CALLBACK_TRACE /* calls made by Linux */ +#undef DEBUG_INTERRUPT_TRACE /* calls to handler */ +#undef DEBUG_INTERRUPT_INFO /* type of interrupt and so on */ +#define DEBUG_INTERRUPT_ERROR /* problems */ +#undef DEBUG_CONFIG_TRACE /* Trace the config functions. */ +#undef DEBUG_CONFIG_INFO /* what's going on */ +#define DEBUG_CONFIG_ERROR /* errors on configuration */ +#undef DEBUG_TX_TRACE /* transmission calls */ +#undef DEBUG_TX_INFO /* header of the transmitted packet */ +#undef DEBUG_TX_FAIL /* Normal failure conditions */ +#define DEBUG_TX_ERROR /* Unexpected conditions */ +#undef DEBUG_RX_TRACE /* transmission calls */ +#undef DEBUG_RX_INFO /* header of the received packet */ +#undef DEBUG_RX_FAIL /* Normal failure conditions */ +#define DEBUG_RX_ERROR /* Unexpected conditions */ + +#undef DEBUG_PACKET_DUMP /* Dump packet on the screen if defined to 32. */ +#undef DEBUG_IOCTL_TRACE /* misc. call by Linux */ +#undef DEBUG_IOCTL_INFO /* various debugging info */ +#define DEBUG_IOCTL_ERROR /* what's going wrong */ +#define DEBUG_BASIC_SHOW /* Show basic startup info. */ +#undef DEBUG_VERSION_SHOW /* Print version info. */ +#undef DEBUG_PSA_SHOW /* Dump PSA to screen. */ +#undef DEBUG_MMC_SHOW /* Dump mmc to screen. */ +#undef DEBUG_SHOW_UNUSED /* Show unused fields too. */ +#undef DEBUG_I82586_SHOW /* Show i82586 status. */ +#undef DEBUG_DEVICE_SHOW /* Show device parameters. */ + +/************************ CONSTANTS & MACROS ************************/ + +#ifdef DEBUG_VERSION_SHOW +static const char *version = "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n"; +#endif + +/* Watchdog temporisation */ +#define WATCHDOG_JIFFIES (512*HZ/100) + +/* Macro to get the number of elements in an array */ +#define NELS(a) (sizeof(a) / sizeof(a[0])) + +/* ------------------------ PRIVATE IOCTL ------------------------ */ + +#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ +#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ + +#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 2 /* Set histogram ranges */ +#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 3 /* Get histogram values */ + +/****************************** TYPES ******************************/ + +/* Shortcuts */ +typedef struct net_device_stats en_stats; +typedef struct iw_statistics iw_stats; +typedef struct iw_quality iw_qual; +typedef struct iw_freq iw_freq; +typedef struct net_local net_local; +typedef struct timer_list timer_list; + +/* Basic types */ +typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ + +/* + * Static specific data for the interface. + * + * For each network interface, Linux keeps data in two structures: "device" + * keeps the generic data (same format for everybody) and "net_local" keeps + * additional specific data. + * Note that some of this specific data is in fact generic (en_stats, for + * example). + */ +struct net_local +{ + net_local * next; /* linked list of the devices */ + struct net_device * dev; /* reverse link */ + spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ + en_stats stats; /* Ethernet interface statistics */ + int nresets; /* number of hardware resets */ + u_char reconfig_82586; /* We need to reconfigure the controller. */ + u_char promiscuous; /* promiscuous mode */ + int mc_count; /* number of multicast addresses */ + u_short hacr; /* current host interface state */ + + int tx_n_in_use; + u_short rx_head; + u_short rx_last; + u_short tx_first_free; + u_short tx_first_in_use; + +#ifdef WIRELESS_EXT + iw_stats wstats; /* Wireless-specific statistics */ + + struct iw_spy_data spy_data; + struct iw_public_data wireless_data; +#endif + +#ifdef HISTOGRAM + int his_number; /* number of intervals */ + u_char his_range[16]; /* boundaries of interval ]n-1; n] */ + u_long his_sum[16]; /* sum in interval */ +#endif /* HISTOGRAM */ +}; + +/**************************** PROTOTYPES ****************************/ + +/* ----------------------- MISC. SUBROUTINES ------------------------ */ +static u_char + wv_irq_to_psa(int); +static int + wv_psa_to_irq(u_char); +/* ------------------- HOST ADAPTER SUBROUTINES ------------------- */ +static inline u_short /* data */ + hasr_read(u_long); /* Read the host interface: base address */ +static inline void + hacr_write(u_long, /* Write to host interface: base address */ + u_short), /* data */ + hacr_write_slow(u_long, + u_short), + set_chan_attn(u_long, /* ioaddr */ + u_short), /* hacr */ + wv_hacr_reset(u_long), /* ioaddr */ + wv_16_off(u_long, /* ioaddr */ + u_short), /* hacr */ + wv_16_on(u_long, /* ioaddr */ + u_short), /* hacr */ + wv_ints_off(struct net_device *), + wv_ints_on(struct net_device *); +/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ +static void + psa_read(u_long, /* Read the Parameter Storage Area. */ + u_short, /* hacr */ + int, /* offset in PSA */ + u_char *, /* buffer to fill */ + int), /* size to read */ + psa_write(u_long, /* Write to the PSA. */ + u_short, /* hacr */ + int, /* offset in PSA */ + u_char *, /* buffer in memory */ + int); /* length of buffer */ +static inline void + mmc_out(u_long, /* Write 1 byte to the Modem Manag Control. */ + u_short, + u_char), + mmc_write(u_long, /* Write n bytes to the MMC. */ + u_char, + u_char *, + int); +static inline u_char /* Read 1 byte from the MMC. */ + mmc_in(u_long, + u_short); +static inline void + mmc_read(u_long, /* Read n bytes from the MMC. */ + u_char, + u_char *, + int), + fee_wait(u_long, /* Wait for frequency EEPROM: base address */ + int, /* base delay to wait for */ + int); /* time to wait */ +static void + fee_read(u_long, /* Read the frequency EEPROM: base address */ + u_short, /* destination offset */ + u_short *, /* data buffer */ + int); /* number of registers */ +/* ---------------------- I82586 SUBROUTINES ----------------------- */ +static /*inline*/ void + obram_read(u_long, /* ioaddr */ + u_short, /* o */ + u_char *, /* b */ + int); /* n */ +static inline void + obram_write(u_long, /* ioaddr */ + u_short, /* o */ + u_char *, /* b */ + int); /* n */ +static void + wv_ack(struct net_device *); +static inline int + wv_synchronous_cmd(struct net_device *, + const char *), + wv_config_complete(struct net_device *, + u_long, + net_local *); +static int + wv_complete(struct net_device *, + u_long, + net_local *); +static inline void + wv_82586_reconfig(struct net_device *); +/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ +#ifdef DEBUG_I82586_SHOW +static void + wv_scb_show(unsigned short); +#endif +static inline void + wv_init_info(struct net_device *); /* display startup info */ +/* ------------------- IOCTL, STATS & RECONFIG ------------------- */ +static en_stats * + wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */ +static iw_stats * + wavelan_get_wireless_stats(struct net_device *); +static void + wavelan_set_multicast_list(struct net_device *); +/* ----------------------- PACKET RECEPTION ----------------------- */ +static inline void + wv_packet_read(struct net_device *, /* Read a packet from a frame. */ + u_short, + int), + wv_receive(struct net_device *); /* Read all packets waiting. */ +/* --------------------- PACKET TRANSMISSION --------------------- */ +static inline int + wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer. */ + void *, + short); +static int + wavelan_packet_xmit(struct sk_buff *, /* Send a packet. */ + struct net_device *); +/* -------------------- HARDWARE CONFIGURATION -------------------- */ +static inline int + wv_mmc_init(struct net_device *), /* Initialize the modem. */ + wv_ru_start(struct net_device *), /* Start the i82586 receiver unit. */ + wv_cu_start(struct net_device *), /* Start the i82586 command unit. */ + wv_82586_start(struct net_device *); /* Start the i82586. */ +static void + wv_82586_config(struct net_device *); /* Configure the i82586. */ +static inline void + wv_82586_stop(struct net_device *); +static int + wv_hw_reset(struct net_device *), /* Reset the WaveLAN hardware. */ + wv_check_ioaddr(u_long, /* ioaddr */ + u_char *); /* mac address (read) */ +/* ---------------------- INTERRUPT HANDLING ---------------------- */ +static irqreturn_t + wavelan_interrupt(int, /* interrupt handler */ + void *, + struct pt_regs *); +static void + wavelan_watchdog(struct net_device *); /* transmission watchdog */ +/* ------------------- CONFIGURATION CALLBACKS ------------------- */ +static int + wavelan_open(struct net_device *), /* Open the device. */ + wavelan_close(struct net_device *), /* Close the device. */ + wavelan_config(struct net_device *, unsigned short);/* Configure one device. */ +extern struct net_device *wavelan_probe(int unit); /* See Space.c. */ + +/**************************** VARIABLES ****************************/ + +/* + * This is the root of the linked list of WaveLAN drivers + * It is use to verify that we don't reuse the same base address + * for two different drivers and to clean up when removing the module. + */ +static net_local * wavelan_list = (net_local *) NULL; + +/* + * This table is used to translate the PSA value to IRQ number + * and vice versa. + */ +static u_char irqvals[] = +{ + 0, 0, 0, 0x01, + 0x02, 0x04, 0, 0x08, + 0, 0, 0x10, 0x20, + 0x40, 0, 0, 0x80, +}; + +/* + * Table of the available I/O addresses (base addresses) for WaveLAN + */ +static unsigned short iobase[] = +{ +#if 0 + /* Leave out 0x3C0 for now -- seems to clash with some video + * controllers. + * Leave out the others too -- we will always use 0x390 and leave + * 0x300 for the Ethernet device. + * Jean II: 0x3E0 is fine as well. + */ + 0x300, 0x390, 0x3E0, 0x3C0 +#endif /* 0 */ + 0x390, 0x3E0 +}; + +#ifdef MODULE +/* Parameters set by insmod */ +static int io[4]; +static int irq[4]; +static char *name[4]; +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param_array(name, charp, NULL, 0); + +MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required"); +MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)"); +MODULE_PARM_DESC(name, "WaveLAN interface neme(s)"); +#endif /* MODULE */ + +#endif /* WAVELAN_P_H */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c new file mode 100644 index 00000000000..ec8329788e4 --- /dev/null +++ b/drivers/net/wireless/wavelan_cs.c @@ -0,0 +1,4914 @@ +/* + * Wavelan Pcmcia driver + * + * Jean II - HPLB '96 + * + * Reorganisation and extension of the driver. + * Original copyright follow. See wavelan_cs.p.h for details. + * + * This code is derived from Anthony D. Joseph's code and all the changes here + * are also under the original copyright below. + * + * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and + * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services + * + * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added + * critical code in the routine to initialize the Modem Management Controller. + * + * Thanks to Alan Cox and Bruce Janson for their advice. + * + * -- Yunzhou Li (scip4166@nus.sg) + * +#ifdef WAVELAN_ROAMING + * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu) + * based on patch by Joe Finney from Lancaster University. +#endif + * + * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An + * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor. + * + * A non-shared memory PCMCIA ethernet driver for linux + * + * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu) + * + * + * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu) + * + * Apr 2 '98 made changes to bring the i82593 control/int handling in line + * with offical specs... + * + **************************************************************************** + * Copyright 1995 + * Anthony D. Joseph + * Massachusetts Institute of Technology + * + * Permission to use, copy, modify, and distribute this program + * for any purpose and without fee is hereby granted, provided + * that this copyright and permission notice appear on all copies + * and supporting documentation, the name of M.I.T. not be used + * in advertising or publicity pertaining to distribution of the + * program without specific prior permission, and notice be given + * in supporting documentation that copying and distribution is + * by permission of M.I.T. M.I.T. makes no representations about + * the suitability of this software for any purpose. It is pro- + * vided "as is" without express or implied warranty. + **************************************************************************** + * + */ + +/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */ +#include "wavelan_cs.p.h" /* Private header */ + +/************************* MISC SUBROUTINES **************************/ +/* + * Subroutines which won't fit in one of the following category + * (wavelan modem or i82593) + */ + +#ifdef STRUCT_CHECK +/*------------------------------------------------------------------*/ +/* + * Sanity routine to verify the sizes of the various WaveLAN interface + * structures. + */ +static char * +wv_structuct_check(void) +{ +#define SC(t,s,n) if (sizeof(t) != s) return(n); + + SC(psa_t, PSA_SIZE, "psa_t"); + SC(mmw_t, MMW_SIZE, "mmw_t"); + SC(mmr_t, MMR_SIZE, "mmr_t"); + +#undef SC + + return((char *) NULL); +} /* wv_structuct_check */ +#endif /* STRUCT_CHECK */ + +/******************* MODEM MANAGEMENT SUBROUTINES *******************/ +/* + * Useful subroutines to manage the modem of the wavelan + */ + +/*------------------------------------------------------------------*/ +/* + * Read from card's Host Adaptor Status Register. + */ +static inline u_char +hasr_read(u_long base) +{ + return(inb(HASR(base))); +} /* hasr_read */ + +/*------------------------------------------------------------------*/ +/* + * Write to card's Host Adapter Command Register. + */ +static inline void +hacr_write(u_long base, + u_char hacr) +{ + outb(hacr, HACR(base)); +} /* hacr_write */ + +/*------------------------------------------------------------------*/ +/* + * Write to card's Host Adapter Command Register. Include a delay for + * those times when it is needed. + */ +static inline void +hacr_write_slow(u_long base, + u_char hacr) +{ + hacr_write(base, hacr); + /* delay might only be needed sometimes */ + mdelay(1); +} /* hacr_write_slow */ + +/*------------------------------------------------------------------*/ +/* + * Read the Parameter Storage Area from the WaveLAN card's memory + */ +static void +psa_read(struct net_device * dev, + int o, /* offset in PSA */ + u_char * b, /* buffer to fill */ + int n) /* size to read */ +{ + net_local *lp = netdev_priv(dev); + u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1); + + while(n-- > 0) + { + *b++ = readb(ptr); + /* Due to a lack of address decode pins, the WaveLAN PCMCIA card + * only supports reading even memory addresses. That means the + * increment here MUST be two. + * Because of that, we can't use memcpy_fromio()... + */ + ptr += 2; + } +} /* psa_read */ + +/*------------------------------------------------------------------*/ +/* + * Write the Paramter Storage Area to the WaveLAN card's memory + */ +static void +psa_write(struct net_device * dev, + int o, /* Offset in psa */ + u_char * b, /* Buffer in memory */ + int n) /* Length of buffer */ +{ + net_local *lp = netdev_priv(dev); + u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1); + int count = 0; + kio_addr_t base = dev->base_addr; + /* As there seem to have no flag PSA_BUSY as in the ISA model, we are + * oblige to verify this address to know when the PSA is ready... */ + volatile u_char __iomem *verify = lp->mem + PSA_ADDR + + (psaoff(0, psa_comp_number) << 1); + + /* Authorize writting to PSA */ + hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN); + + while(n-- > 0) + { + /* write to PSA */ + writeb(*b++, ptr); + ptr += 2; + + /* I don't have the spec, so I don't know what the correct + * sequence to write is. This hack seem to work for me... */ + count = 0; + while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100)) + mdelay(1); + } + + /* Put the host interface back in standard state */ + hacr_write(base, HACR_DEFAULT); +} /* psa_write */ + +#ifdef SET_PSA_CRC +/*------------------------------------------------------------------*/ +/* + * Calculate the PSA CRC + * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code + * NOTE: By specifying a length including the CRC position the + * returned value should be zero. (i.e. a correct checksum in the PSA) + * + * The Windows drivers don't use the CRC, but the AP and the PtP tool + * depend on it. + */ +static u_short +psa_crc(unsigned char * psa, /* The PSA */ + int size) /* Number of short for CRC */ +{ + int byte_cnt; /* Loop on the PSA */ + u_short crc_bytes = 0; /* Data in the PSA */ + int bit_cnt; /* Loop on the bits of the short */ + + for(byte_cnt = 0; byte_cnt < size; byte_cnt++ ) + { + crc_bytes ^= psa[byte_cnt]; /* Its an xor */ + + for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ ) + { + if(crc_bytes & 0x0001) + crc_bytes = (crc_bytes >> 1) ^ 0xA001; + else + crc_bytes >>= 1 ; + } + } + + return crc_bytes; +} /* psa_crc */ +#endif /* SET_PSA_CRC */ + +/*------------------------------------------------------------------*/ +/* + * update the checksum field in the Wavelan's PSA + */ +static void +update_psa_checksum(struct net_device * dev) +{ +#ifdef SET_PSA_CRC + psa_t psa; + u_short crc; + + /* read the parameter storage area */ + psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); + + /* update the checksum */ + crc = psa_crc((unsigned char *) &psa, + sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1]) + - sizeof(psa.psa_crc_status)); + + psa.psa_crc[0] = crc & 0xFF; + psa.psa_crc[1] = (crc & 0xFF00) >> 8; + + /* Write it ! */ + psa_write(dev, (char *)&psa.psa_crc - (char *)&psa, + (unsigned char *)&psa.psa_crc, 2); + +#ifdef DEBUG_IOCTL_INFO + printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n", + dev->name, psa.psa_crc[0], psa.psa_crc[1]); + + /* Check again (luxury !) */ + crc = psa_crc((unsigned char *) &psa, + sizeof(psa) - sizeof(psa.psa_crc_status)); + + if(crc != 0) + printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name); +#endif /* DEBUG_IOCTL_INFO */ +#endif /* SET_PSA_CRC */ +} /* update_psa_checksum */ + +/*------------------------------------------------------------------*/ +/* + * Write 1 byte to the MMC. + */ +static inline void +mmc_out(u_long base, + u_short o, + u_char d) +{ + int count = 0; + + /* Wait for MMC to go idle */ + while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) + udelay(10); + + outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base)); + outb(d, MMD(base)); +} + +/*------------------------------------------------------------------*/ +/* + * Routine to write bytes to the Modem Management Controller. + * We start by the end because it is the way it should be ! + */ +static inline void +mmc_write(u_long base, + u_char o, + u_char * b, + int n) +{ + o += n; + b += n; + + while(n-- > 0 ) + mmc_out(base, --o, *(--b)); +} /* mmc_write */ + +/*------------------------------------------------------------------*/ +/* + * Read 1 byte from the MMC. + * Optimised version for 1 byte, avoid using memory... + */ +static inline u_char +mmc_in(u_long base, + u_short o) +{ + int count = 0; + + while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) + udelay(10); + outb(o << 1, MMR(base)); /* Set the read address */ + + outb(0, MMD(base)); /* Required dummy write */ + + while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) + udelay(10); + return (u_char) (inb(MMD(base))); /* Now do the actual read */ +} + +/*------------------------------------------------------------------*/ +/* + * Routine to read bytes from the Modem Management Controller. + * The implementation is complicated by a lack of address lines, + * which prevents decoding of the low-order bit. + * (code has just been moved in the above function) + * We start by the end because it is the way it should be ! + */ +static inline void +mmc_read(u_long base, + u_char o, + u_char * b, + int n) +{ + o += n; + b += n; + + while(n-- > 0) + *(--b) = mmc_in(base, --o); +} /* mmc_read */ + +/*------------------------------------------------------------------*/ +/* + * Get the type of encryption available... + */ +static inline int +mmc_encr(u_long base) /* i/o port of the card */ +{ + int temp; + + temp = mmc_in(base, mmroff(0, mmr_des_avail)); + if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES)) + return 0; + else + return temp; +} + +/*------------------------------------------------------------------*/ +/* + * Wait for the frequency EEprom to complete a command... + * I hope this one will be optimally inlined... + */ +static inline void +fee_wait(u_long base, /* i/o port of the card */ + int delay, /* Base delay to wait for */ + int number) /* Number of time to wait */ +{ + int count = 0; /* Wait only a limited time */ + + while((count++ < number) && + (mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY)) + udelay(delay); +} + +/*------------------------------------------------------------------*/ +/* + * Read bytes from the Frequency EEprom (frequency select cards). + */ +static void +fee_read(u_long base, /* i/o port of the card */ + u_short o, /* destination offset */ + u_short * b, /* data buffer */ + int n) /* number of registers */ +{ + b += n; /* Position at the end of the area */ + + /* Write the address */ + mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1); + + /* Loop on all buffer */ + while(n-- > 0) + { + /* Write the read command */ + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ); + + /* Wait until EEprom is ready (should be quick !) */ + fee_wait(base, 10, 100); + + /* Read the value */ + *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) | + mmc_in(base, mmroff(0, mmr_fee_data_l))); + } +} + +#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ + +/*------------------------------------------------------------------*/ +/* + * Write bytes from the Frequency EEprom (frequency select cards). + * This is a bit complicated, because the frequency eeprom has to + * be unprotected and the write enabled. + * Jean II + */ +static void +fee_write(u_long base, /* i/o port of the card */ + u_short o, /* destination offset */ + u_short * b, /* data buffer */ + int n) /* number of registers */ +{ + b += n; /* Position at the end of the area */ + +#ifdef EEPROM_IS_PROTECTED /* disabled */ +#ifdef DOESNT_SEEM_TO_WORK /* disabled */ + /* Ask to read the protected register */ + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD); + + fee_wait(base, 10, 100); + + /* Read the protected register */ + printk("Protected 2 : %02X-%02X\n", + mmc_in(base, mmroff(0, mmr_fee_data_h)), + mmc_in(base, mmroff(0, mmr_fee_data_l))); +#endif /* DOESNT_SEEM_TO_WORK */ + + /* Enable protected register */ + mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN); + + fee_wait(base, 10, 100); + + /* Unprotect area */ + mmc_out(base, mmwoff(0, mmw_fee_addr), o + n); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); +#ifdef DOESNT_SEEM_TO_WORK /* disabled */ + /* Or use : */ + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR); +#endif /* DOESNT_SEEM_TO_WORK */ + + fee_wait(base, 10, 100); +#endif /* EEPROM_IS_PROTECTED */ + + /* Write enable */ + mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN); + + fee_wait(base, 10, 100); + + /* Write the EEprom address */ + mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1); + + /* Loop on all buffer */ + while(n-- > 0) + { + /* Write the value */ + mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8); + mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF); + + /* Write the write command */ + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE); + + /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */ + mdelay(10); + fee_wait(base, 10, 100); + } + + /* Write disable */ + mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS); + + fee_wait(base, 10, 100); + +#ifdef EEPROM_IS_PROTECTED /* disabled */ + /* Reprotect EEprom */ + mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); + + fee_wait(base, 10, 100); +#endif /* EEPROM_IS_PROTECTED */ +} +#endif /* WIRELESS_EXT */ + +/******************* WaveLAN Roaming routines... ********************/ + +#ifdef WAVELAN_ROAMING /* Conditional compile, see wavelan_cs.h */ + +unsigned char WAVELAN_BEACON_ADDRESS[]= {0x09,0x00,0x0e,0x20,0x03,0x00}; + +void wv_roam_init(struct net_device *dev) +{ + net_local *lp= netdev_priv(dev); + + /* Do not remove this unless you have a good reason */ + printk(KERN_NOTICE "%s: Warning, you have enabled roaming on" + " device %s !\n", dev->name, dev->name); + printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature" + " of the Wavelan driver.\n"); + printk(KERN_NOTICE "It may work, but may also make the driver behave in" + " erratic ways or crash.\n"); + + lp->wavepoint_table.head=NULL; /* Initialise WavePoint table */ + lp->wavepoint_table.num_wavepoints=0; + lp->wavepoint_table.locked=0; + lp->curr_point=NULL; /* No default WavePoint */ + lp->cell_search=0; + + lp->cell_timer.data=(long)lp; /* Start cell expiry timer */ + lp->cell_timer.function=wl_cell_expiry; + lp->cell_timer.expires=jiffies+CELL_TIMEOUT; + add_timer(&lp->cell_timer); + + wv_nwid_filter(NWID_PROMISC,lp) ; /* Enter NWID promiscuous mode */ + /* to build up a good WavePoint */ + /* table... */ + printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name); +} + +void wv_roam_cleanup(struct net_device *dev) +{ + wavepoint_history *ptr,*old_ptr; + net_local *lp= netdev_priv(dev); + + printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name); + + /* Fixme : maybe we should check that the timer exist before deleting it */ + del_timer(&lp->cell_timer); /* Remove cell expiry timer */ + ptr=lp->wavepoint_table.head; /* Clear device's WavePoint table */ + while(ptr!=NULL) + { + old_ptr=ptr; + ptr=ptr->next; + wl_del_wavepoint(old_ptr,lp); + } +} + +/* Enable/Disable NWID promiscuous mode on a given device */ +void wv_nwid_filter(unsigned char mode, net_local *lp) +{ + mm_t m; + unsigned long flags; + +#ifdef WAVELAN_ROAMING_DEBUG + printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name); +#endif + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&lp->spinlock, flags); + + m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00; + mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1); + + if(mode==NWID_PROMISC) + lp->cell_search=1; + else + lp->cell_search=0; + + /* ReEnable interrupts & restore flags */ + spin_unlock_irqrestore(&lp->spinlock, flags); +} + +/* Find a record in the WavePoint table matching a given NWID */ +wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp) +{ + wavepoint_history *ptr=lp->wavepoint_table.head; + + while(ptr!=NULL){ + if(ptr->nwid==nwid) + return ptr; + ptr=ptr->next; + } + return NULL; +} + +/* Create a new wavepoint table entry */ +wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp) +{ + wavepoint_history *new_wavepoint; + +#ifdef WAVELAN_ROAMING_DEBUG + printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid); +#endif + + if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS) + return NULL; + + new_wavepoint=(wavepoint_history *) kmalloc(sizeof(wavepoint_history),GFP_ATOMIC); + if(new_wavepoint==NULL) + return NULL; + + new_wavepoint->nwid=nwid; /* New WavePoints NWID */ + new_wavepoint->average_fast=0; /* Running Averages..*/ + new_wavepoint->average_slow=0; + new_wavepoint->qualptr=0; /* Start of ringbuffer */ + new_wavepoint->last_seq=seq-1; /* Last sequence no.seen */ + memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */ + + new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */ + new_wavepoint->prev=NULL; + + if(lp->wavepoint_table.head!=NULL) + lp->wavepoint_table.head->prev=new_wavepoint; + + lp->wavepoint_table.head=new_wavepoint; + + lp->wavepoint_table.num_wavepoints++; /* no. of visible wavepoints */ + + return new_wavepoint; +} + +/* Remove a wavepoint entry from WavePoint table */ +void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp) +{ + if(wavepoint==NULL) + return; + + if(lp->curr_point==wavepoint) + lp->curr_point=NULL; + + if(wavepoint->prev!=NULL) + wavepoint->prev->next=wavepoint->next; + + if(wavepoint->next!=NULL) + wavepoint->next->prev=wavepoint->prev; + + if(lp->wavepoint_table.head==wavepoint) + lp->wavepoint_table.head=wavepoint->next; + + lp->wavepoint_table.num_wavepoints--; + kfree(wavepoint); +} + +/* Timer callback function - checks WavePoint table for stale entries */ +void wl_cell_expiry(unsigned long data) +{ + net_local *lp=(net_local *)data; + wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point; + +#if WAVELAN_ROAMING_DEBUG > 1 + printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name); +#endif + + if(lp->wavepoint_table.locked) + { +#if WAVELAN_ROAMING_DEBUG > 1 + printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n"); +#endif + + lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */ + add_timer(&lp->cell_timer); + return; + } + + while(wavepoint!=NULL) + { + if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT)) + { +#ifdef WAVELAN_ROAMING_DEBUG + printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid); +#endif + + old_point=wavepoint; + wavepoint=wavepoint->next; + wl_del_wavepoint(old_point,lp); + } + else + wavepoint=wavepoint->next; + } + lp->cell_timer.expires=jiffies+CELL_TIMEOUT; + add_timer(&lp->cell_timer); +} + +/* Update SNR history of a wavepoint */ +void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq) +{ + int i=0,num_missed=0,ptr=0; + int average_fast=0,average_slow=0; + + num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed + any beacons? */ + if(num_missed) + for(i=0;i<num_missed;i++) + { + wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */ + wavepoint->qualptr %=WAVEPOINT_HISTORY; /* in the ringbuffer. */ + } + wavepoint->last_seen=jiffies; /* Add beacon to history */ + wavepoint->last_seq=seq; + wavepoint->sigqual[wavepoint->qualptr++]=sigqual; + wavepoint->qualptr %=WAVEPOINT_HISTORY; + ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY; + + for(i=0;i<WAVEPOINT_FAST_HISTORY;i++) /* Update running averages */ + { + average_fast+=wavepoint->sigqual[ptr++]; + ptr %=WAVEPOINT_HISTORY; + } + + average_slow=average_fast; + for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++) + { + average_slow+=wavepoint->sigqual[ptr++]; + ptr %=WAVEPOINT_HISTORY; + } + + wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY; + wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY; +} + +/* Perform a handover to a new WavePoint */ +void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) +{ + kio_addr_t base = lp->dev->base_addr; + mm_t m; + unsigned long flags; + + if(wavepoint==lp->curr_point) /* Sanity check... */ + { + wv_nwid_filter(!NWID_PROMISC,lp); + return; + } + +#ifdef WAVELAN_ROAMING_DEBUG + printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name); +#endif + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&lp->spinlock, flags); + + m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF; + m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8; + + mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2); + + /* ReEnable interrupts & restore flags */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + wv_nwid_filter(!NWID_PROMISC,lp); + lp->curr_point=wavepoint; +} + +/* Called when a WavePoint beacon is received */ +static inline void wl_roam_gather(struct net_device * dev, + u_char * hdr, /* Beacon header */ + u_char * stats) /* SNR, Signal quality + of packet */ +{ + wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */ + unsigned short nwid=ntohs(beacon->nwid); + unsigned short sigqual=stats[2] & MMR_SGNL_QUAL; /* SNR of beacon */ + wavepoint_history *wavepoint=NULL; /* WavePoint table entry */ + net_local *lp = netdev_priv(dev); /* Device info */ + +#ifdef I_NEED_THIS_FEATURE + /* Some people don't need this, some other may need it */ + nwid=nwid^ntohs(beacon->domain_id); +#endif + +#if WAVELAN_ROAMING_DEBUG > 1 + printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name); + printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual); +#endif + + lp->wavepoint_table.locked=1; /* <Mutex> */ + + wavepoint=wl_roam_check(nwid,lp); /* Find WavePoint table entry */ + if(wavepoint==NULL) /* If no entry, Create a new one... */ + { + wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp); + if(wavepoint==NULL) + goto out; + } + if(lp->curr_point==NULL) /* If this is the only WavePoint, */ + wv_roam_handover(wavepoint, lp); /* Jump on it! */ + + wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history + stats. */ + + if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */ + if(!lp->cell_search) /* WavePoint is getting faint, */ + wv_nwid_filter(NWID_PROMISC,lp); /* start looking for a new one */ + + if(wavepoint->average_slow > + lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA) + wv_roam_handover(wavepoint, lp); /* Handover to a better WavePoint */ + + if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */ + if(lp->cell_search) /* getting better, drop out of cell search mode */ + wv_nwid_filter(!NWID_PROMISC,lp); + +out: + lp->wavepoint_table.locked=0; /* </MUTEX> :-) */ +} + +/* Test this MAC frame a WavePoint beacon */ +static inline int WAVELAN_BEACON(unsigned char *data) +{ + wavepoint_beacon *beacon= (wavepoint_beacon *)data; + static wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; + + if(memcmp(beacon,&beacon_template,9)==0) + return 1; + else + return 0; +} +#endif /* WAVELAN_ROAMING */ + +/************************ I82593 SUBROUTINES *************************/ +/* + * Useful subroutines to manage the Ethernet controller + */ + +/*------------------------------------------------------------------*/ +/* + * Routine to synchronously send a command to the i82593 chip. + * Should be called with interrupts disabled. + * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(), + * wv_82593_config() & wv_diag()) + */ +static int +wv_82593_cmd(struct net_device * dev, + char * str, + int cmd, + int result) +{ + kio_addr_t base = dev->base_addr; + int status; + int wait_completed; + long spin; + + /* Spin until the chip finishes executing its current command (if any) */ + spin = 1000; + do + { + /* Time calibration of the loop */ + udelay(10); + + /* Read the interrupt register */ + outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); + status = inb(LCSR(base)); + } + while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0)); + + /* If the interrupt hasn't be posted */ + if(spin <= 0) + { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n", + str, status); +#endif + return(FALSE); + } + + /* Issue the command to the controller */ + outb(cmd, LCCR(base)); + + /* If we don't have to check the result of the command + * Note : this mean that the irq handler will deal with that */ + if(result == SR0_NO_RESULT) + return(TRUE); + + /* We are waiting for command completion */ + wait_completed = TRUE; + + /* Busy wait while the LAN controller executes the command. */ + spin = 1000; + do + { + /* Time calibration of the loop */ + udelay(10); + + /* Read the interrupt register */ + outb(CR0_STATUS_0 | OP0_NOP, LCCR(base)); + status = inb(LCSR(base)); + + /* Check if there was an interrupt posted */ + if((status & SR0_INTERRUPT)) + { + /* Acknowledge the interrupt */ + outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); + + /* Check if interrupt is a command completion */ + if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) && + ((status & SR0_BOTH_RX_TX) != 0x0) && + !(status & SR0_RECEPTION)) + { + /* Signal command completion */ + wait_completed = FALSE; + } + else + { + /* Note : Rx interrupts will be handled later, because we can + * handle multiple Rx packets at once */ +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_INFO "wv_82593_cmd: not our interrupt\n"); +#endif + } + } + } + while(wait_completed && (spin-- > 0)); + + /* If the interrupt hasn't be posted */ + if(wait_completed) + { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n", + str, status); +#endif + return(FALSE); + } + + /* Check the return code returned by the card (see above) against + * the expected return code provided by the caller */ + if((status & SR0_EVENT_MASK) != result) + { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n", + str, status); +#endif + return(FALSE); + } + + return(TRUE); +} /* wv_82593_cmd */ + +/*------------------------------------------------------------------*/ +/* + * This routine does a 593 op-code number 7, and obtains the diagnose + * status for the WaveLAN. + */ +static inline int +wv_diag(struct net_device * dev) +{ + int ret = FALSE; + + if(wv_82593_cmd(dev, "wv_diag(): diagnose", + OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED)) + ret = TRUE; + +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_INFO "wavelan_cs: i82593 Self Test failed!\n"); +#endif + return(ret); +} /* wv_diag */ + +/*------------------------------------------------------------------*/ +/* + * Routine to read len bytes from the i82593's ring buffer, starting at + * chip address addr. The results read from the chip are stored in buf. + * The return value is the address to use for next the call. + */ +static int +read_ringbuf(struct net_device * dev, + int addr, + char * buf, + int len) +{ + kio_addr_t base = dev->base_addr; + int ring_ptr = addr; + int chunk_len; + char * buf_ptr = buf; + + /* Get all the buffer */ + while(len > 0) + { + /* Position the Program I/O Register at the ring buffer pointer */ + outb(ring_ptr & 0xff, PIORL(base)); + outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base)); + + /* First, determine how much we can read without wrapping around the + ring buffer */ + if((addr + len) < (RX_BASE + RX_SIZE)) + chunk_len = len; + else + chunk_len = RX_BASE + RX_SIZE - addr; + insb(PIOP(base), buf_ptr, chunk_len); + buf_ptr += chunk_len; + len -= chunk_len; + ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE; + } + return(ring_ptr); +} /* read_ringbuf */ + +/*------------------------------------------------------------------*/ +/* + * Reconfigure the i82593, or at least ask for it... + * Because wv_82593_config use the transmission buffer, we must do it + * when we are sure that there is no transmission, so we do it now + * or in wavelan_packet_xmit() (I can't find any better place, + * wavelan_interrupt is not an option...), so you may experience + * some delay sometime... + */ +static inline void +wv_82593_reconfig(struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + dev_link_t * link = lp->link; + unsigned long flags; + + /* Arm the flag, will be cleard in wv_82593_config() */ + lp->reconfig_82593 = TRUE; + + /* Check if we can do it now ! */ + if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev))) + { + spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */ + wv_82593_config(dev); + spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */ + } + else + { +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG + "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n", + dev->name, dev->state, link->open); +#endif + } +} + +/********************* DEBUG & INFO SUBROUTINES *********************/ +/* + * This routines are used in the code to show debug informations. + * Most of the time, it dump the content of hardware structures... + */ + +#ifdef DEBUG_PSA_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted contents of the Parameter Storage Area. + */ +static void +wv_psa_show(psa_t * p) +{ + printk(KERN_DEBUG "##### wavelan psa contents: #####\n"); + printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n", + p->psa_io_base_addr_1, + p->psa_io_base_addr_2, + p->psa_io_base_addr_3, + p->psa_io_base_addr_4); + printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n", + p->psa_rem_boot_addr_1, + p->psa_rem_boot_addr_2, + p->psa_rem_boot_addr_3); + printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params); + printk("psa_int_req_no: %d\n", p->psa_int_req_no); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "psa_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + p->psa_unused0[0], + p->psa_unused0[1], + p->psa_unused0[2], + p->psa_unused0[3], + p->psa_unused0[4], + p->psa_unused0[5], + p->psa_unused0[6]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "psa_univ_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n", + p->psa_univ_mac_addr[0], + p->psa_univ_mac_addr[1], + p->psa_univ_mac_addr[2], + p->psa_univ_mac_addr[3], + p->psa_univ_mac_addr[4], + p->psa_univ_mac_addr[5]); + printk(KERN_DEBUG "psa_local_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n", + p->psa_local_mac_addr[0], + p->psa_local_mac_addr[1], + p->psa_local_mac_addr[2], + p->psa_local_mac_addr[3], + p->psa_local_mac_addr[4], + p->psa_local_mac_addr[5]); + printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel); + printk("psa_comp_number: %d, ", p->psa_comp_number); + printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set); + printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ", + p->psa_feature_select); + printk("psa_subband/decay_update_prm: %d\n", p->psa_subband); + printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr); + printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay); + printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]); + printk("psa_nwid_select: %d\n", p->psa_nwid_select); + printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select); + printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + p->psa_encryption_key[0], + p->psa_encryption_key[1], + p->psa_encryption_key[2], + p->psa_encryption_key[3], + p->psa_encryption_key[4], + p->psa_encryption_key[5], + p->psa_encryption_key[6], + p->psa_encryption_key[7]); + printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width); + printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ", + p->psa_call_code[0]); + printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + p->psa_call_code[0], + p->psa_call_code[1], + p->psa_call_code[2], + p->psa_call_code[3], + p->psa_call_code[4], + p->psa_call_code[5], + p->psa_call_code[6], + p->psa_call_code[7]); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n", + p->psa_reserved[0], + p->psa_reserved[1], + p->psa_reserved[2], + p->psa_reserved[3]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status); + printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]); + printk("psa_crc_status: 0x%02x\n", p->psa_crc_status); +} /* wv_psa_show */ +#endif /* DEBUG_PSA_SHOW */ + +#ifdef DEBUG_MMC_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the Modem Management Controller. + * This function need to be completed... + */ +static void +wv_mmc_show(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + net_local * lp = netdev_priv(dev); + mmr_t m; + + /* Basic check */ + if(hasr_read(base) & HASR_NO_CLK) + { + printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n", + dev->name); + return; + } + + spin_lock_irqsave(&lp->spinlock, flags); + + /* Read the mmc */ + mmc_out(base, mmwoff(0, mmw_freeze), 1); + mmc_read(base, 0, (u_char *)&m, sizeof(m)); + mmc_out(base, mmwoff(0, mmw_freeze), 0); + +#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ + /* Don't forget to update statistics */ + lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; +#endif /* WIRELESS_EXT */ + + spin_unlock_irqrestore(&lp->spinlock, flags); + + printk(KERN_DEBUG "##### wavelan modem status registers: #####\n"); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + m.mmr_unused0[0], + m.mmr_unused0[1], + m.mmr_unused0[2], + m.mmr_unused0[3], + m.mmr_unused0[4], + m.mmr_unused0[5], + m.mmr_unused0[6], + m.mmr_unused0[7]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n", + m.mmr_des_avail, m.mmr_des_status); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", + m.mmr_unused1[0], + m.mmr_unused1[1], + m.mmr_unused1[2], + m.mmr_unused1[3], + m.mmr_unused1[4]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n", + m.mmr_dce_status, + (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"", + (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ? + "loop test indicated," : "", + (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "", + (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ? + "jabber timer expired," : ""); + printk(KERN_DEBUG "Dsp ID: %02X\n", + m.mmr_dsp_id); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n", + m.mmr_unused2[0], + m.mmr_unused2[1]); +#endif /* DEBUG_SHOW_UNUSED */ + printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n", + (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l, + (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l); + printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n", + m.mmr_thr_pre_set & MMR_THR_PRE_SET, + (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below"); + printk(KERN_DEBUG "signal_lvl: %d [%s], ", + m.mmr_signal_lvl & MMR_SIGNAL_LVL, + (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg"); + printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL, + (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update"); + printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL, + (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0"); +#ifdef DEBUG_SHOW_UNUSED + printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l); +#endif /* DEBUG_SHOW_UNUSED */ +} /* wv_mmc_show */ +#endif /* DEBUG_MMC_SHOW */ + +#ifdef DEBUG_I82593_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the i82593's receive unit. + */ +static void +wv_ru_show(struct net_device * dev) +{ + net_local *lp = netdev_priv(dev); + + printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n"); + printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop); + /* + * Not implemented yet... + */ + printk("\n"); +} /* wv_ru_show */ +#endif /* DEBUG_I82593_SHOW */ + +#ifdef DEBUG_DEVICE_SHOW +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the WaveLAN PCMCIA device driver. + */ +static void +wv_dev_show(struct net_device * dev) +{ + printk(KERN_DEBUG "dev:"); + printk(" state=%lX,", dev->state); + printk(" trans_start=%ld,", dev->trans_start); + printk(" flags=0x%x,", dev->flags); + printk("\n"); +} /* wv_dev_show */ + +/*------------------------------------------------------------------*/ +/* + * Print the formatted status of the WaveLAN PCMCIA device driver's + * private information. + */ +static void +wv_local_show(struct net_device * dev) +{ + net_local *lp = netdev_priv(dev); + + printk(KERN_DEBUG "local:"); + /* + * Not implemented yet... + */ + printk("\n"); +} /* wv_local_show */ +#endif /* DEBUG_DEVICE_SHOW */ + +#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) +/*------------------------------------------------------------------*/ +/* + * Dump packet header (and content if necessary) on the screen + */ +static inline void +wv_packet_info(u_char * p, /* Packet to dump */ + int length, /* Length of the packet */ + char * msg1, /* Name of the device */ + char * msg2) /* Name of the function */ +{ + int i; + int maxi; + + printk(KERN_DEBUG "%s: %s(): dest %02X:%02X:%02X:%02X:%02X:%02X, length %d\n", + msg1, msg2, p[0], p[1], p[2], p[3], p[4], p[5], length); + printk(KERN_DEBUG "%s: %s(): src %02X:%02X:%02X:%02X:%02X:%02X, type 0x%02X%02X\n", + msg1, msg2, p[6], p[7], p[8], p[9], p[10], p[11], p[12], p[13]); + +#ifdef DEBUG_PACKET_DUMP + + printk(KERN_DEBUG "data=\""); + + if((maxi = length) > DEBUG_PACKET_DUMP) + maxi = DEBUG_PACKET_DUMP; + for(i = 14; i < maxi; i++) + if(p[i] >= ' ' && p[i] <= '~') + printk(" %c", p[i]); + else + printk("%02X", p[i]); + if(maxi < length) + printk(".."); + printk("\"\n"); + printk(KERN_DEBUG "\n"); +#endif /* DEBUG_PACKET_DUMP */ +} +#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */ + +/*------------------------------------------------------------------*/ +/* + * This is the information which is displayed by the driver at startup + * There is a lot of flag to configure it at your will... + */ +static inline void +wv_init_info(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + psa_t psa; + int i; + + /* Read the parameter storage area */ + psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); + +#ifdef DEBUG_PSA_SHOW + wv_psa_show(&psa); +#endif +#ifdef DEBUG_MMC_SHOW + wv_mmc_show(dev); +#endif +#ifdef DEBUG_I82593_SHOW + wv_ru_show(dev); +#endif + +#ifdef DEBUG_BASIC_SHOW + /* Now, let's go for the basic stuff */ + printk(KERN_NOTICE "%s: WaveLAN: port %#lx, irq %d, hw_addr", + dev->name, base, dev->irq); + for(i = 0; i < WAVELAN_ADDR_SIZE; i++) + printk("%s%02X", (i == 0) ? " " : ":", dev->dev_addr[i]); + + /* Print current network id */ + if(psa.psa_nwid_select) + printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]); + else + printk(", nwid off"); + + /* If 2.00 card */ + if(!(mmc_in(base, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) + { + unsigned short freq; + + /* Ask the EEprom to read the frequency from the first area */ + fee_read(base, 0x00 /* 1st area - frequency... */, + &freq, 1); + + /* Print frequency */ + printk(", 2.00, %ld", (freq >> 6) + 2400L); + + /* Hack !!! */ + if(freq & 0x20) + printk(".5"); + } + else + { + printk(", PCMCIA, "); + switch (psa.psa_subband) + { + case PSA_SUBBAND_915: + printk("915"); + break; + case PSA_SUBBAND_2425: + printk("2425"); + break; + case PSA_SUBBAND_2460: + printk("2460"); + break; + case PSA_SUBBAND_2484: + printk("2484"); + break; + case PSA_SUBBAND_2430_5: + printk("2430.5"); + break; + default: + printk("unknown"); + } + } + + printk(" MHz\n"); +#endif /* DEBUG_BASIC_SHOW */ + +#ifdef DEBUG_VERSION_SHOW + /* Print version information */ + printk(KERN_NOTICE "%s", version); +#endif +} /* wv_init_info */ + +/********************* IOCTL, STATS & RECONFIG *********************/ +/* + * We found here routines that are called by Linux on differents + * occasions after the configuration and not for transmitting data + * These may be called when the user use ifconfig, /proc/net/dev + * or wireless extensions + */ + +/*------------------------------------------------------------------*/ +/* + * Get the current ethernet statistics. This may be called with the + * card open or closed. + * Used when the user read /proc/net/dev + */ +static en_stats * +wavelan_get_stats(struct net_device * dev) +{ +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name); +#endif + + return(&((net_local *)netdev_priv(dev))->stats); +} + +/*------------------------------------------------------------------*/ +/* + * Set or clear the multicast filter for this adaptor. + * num_addrs == -1 Promiscuous mode, receive all packets + * num_addrs == 0 Normal mode, clear multicast list + * num_addrs > 0 Multicast mode, receive normal and MC packets, + * and do best-effort filtering. + */ + +static void +wavelan_set_multicast_list(struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name); +#endif + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n", + dev->name, dev->flags, dev->mc_count); +#endif + + if(dev->flags & IFF_PROMISC) + { + /* + * Enable promiscuous mode: receive all packets. + */ + if(!lp->promiscuous) + { + lp->promiscuous = 1; + lp->allmulticast = 0; + lp->mc_count = 0; + + wv_82593_reconfig(dev); + + /* Tell the kernel that we are doing a really bad job... */ + dev->flags |= IFF_PROMISC; + } + } + else + /* If all multicast addresses + * or too much multicast addresses for the hardware filter */ + if((dev->flags & IFF_ALLMULTI) || + (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES)) + { + /* + * Disable promiscuous mode, but active the all multicast mode + */ + if(!lp->allmulticast) + { + lp->promiscuous = 0; + lp->allmulticast = 1; + lp->mc_count = 0; + + wv_82593_reconfig(dev); + + /* Tell the kernel that we are doing a really bad job... */ + dev->flags |= IFF_ALLMULTI; + } + } + else + /* If there is some multicast addresses to send */ + if(dev->mc_list != (struct dev_mc_list *) NULL) + { + /* + * Disable promiscuous mode, but receive all packets + * in multicast list + */ +#ifdef MULTICAST_AVOID + if(lp->promiscuous || lp->allmulticast || + (dev->mc_count != lp->mc_count)) +#endif + { + lp->promiscuous = 0; + lp->allmulticast = 0; + lp->mc_count = dev->mc_count; + + wv_82593_reconfig(dev); + } + } + else + { + /* + * Switch to normal mode: disable promiscuous mode and + * clear the multicast list. + */ + if(lp->promiscuous || lp->mc_count == 0) + { + lp->promiscuous = 0; + lp->allmulticast = 0; + lp->mc_count = 0; + + wv_82593_reconfig(dev); + } + } +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * This function doesn't exist... + * (Note : it was a nice way to test the reconfigure stuff...) + */ +#ifdef SET_MAC_ADDRESS +static int +wavelan_set_mac_address(struct net_device * dev, + void * addr) +{ + struct sockaddr * mac = addr; + + /* Copy the address */ + memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE); + + /* Reconfig the beast */ + wv_82593_reconfig(dev); + + return 0; +} +#endif /* SET_MAC_ADDRESS */ + +#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ + +/*------------------------------------------------------------------*/ +/* + * Frequency setting (for hardware able of it) + * It's a bit complicated and you don't really want to look into it... + */ +static inline int +wv_set_frequency(u_long base, /* i/o port of the card */ + iw_freq * frequency) +{ + const int BAND_NUM = 10; /* Number of bands */ + long freq = 0L; /* offset to 2.4 GHz in .5 MHz */ +#ifdef DEBUG_IOCTL_INFO + int i; +#endif + + /* Setting by frequency */ + /* Theoritically, you may set any frequency between + * the two limits with a 0.5 MHz precision. In practice, + * I don't want you to have trouble with local + * regulations... */ + if((frequency->e == 1) && + (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8)) + { + freq = ((frequency->m / 10000) - 24000L) / 5; + } + + /* Setting by channel (same as wfreqsel) */ + /* Warning : each channel is 22MHz wide, so some of the channels + * will interfere... */ + if((frequency->e == 0) && + (frequency->m >= 0) && (frequency->m < BAND_NUM)) + { + /* Get frequency offset. */ + freq = channel_bands[frequency->m] >> 1; + } + + /* Verify if the frequency is allowed */ + if(freq != 0L) + { + u_short table[10]; /* Authorized frequency table */ + + /* Read the frequency table */ + fee_read(base, 0x71 /* frequency table */, + table, 10); + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "Frequency table :"); + for(i = 0; i < 10; i++) + { + printk(" %04X", + table[i]); + } + printk("\n"); +#endif + + /* Look in the table if the frequency is allowed */ + if(!(table[9 - ((freq - 24) / 16)] & + (1 << ((freq - 24) % 16)))) + return -EINVAL; /* not allowed */ + } + else + return -EINVAL; + + /* If we get a usable frequency */ + if(freq != 0L) + { + unsigned short area[16]; + unsigned short dac[2]; + unsigned short area_verify[16]; + unsigned short dac_verify[2]; + /* Corresponding gain (in the power adjust value table) + * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8 + * & WCIN062D.DOC, page 6.2.9 */ + unsigned short power_limit[] = { 40, 80, 120, 160, 0 }; + int power_band = 0; /* Selected band */ + unsigned short power_adjust; /* Correct value */ + + /* Search for the gain */ + power_band = 0; + while((freq > power_limit[power_band]) && + (power_limit[++power_band] != 0)) + ; + + /* Read the first area */ + fee_read(base, 0x00, + area, 16); + + /* Read the DAC */ + fee_read(base, 0x60, + dac, 2); + + /* Read the new power adjust value */ + fee_read(base, 0x6B - (power_band >> 1), + &power_adjust, 1); + if(power_band & 0x1) + power_adjust >>= 8; + else + power_adjust &= 0xFF; + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "Wavelan EEprom Area 1 :"); + for(i = 0; i < 16; i++) + { + printk(" %04X", + area[i]); + } + printk("\n"); + + printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n", + dac[0], dac[1]); +#endif + + /* Frequency offset (for info only...) */ + area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F); + + /* Receiver Principle main divider coefficient */ + area[3] = (freq >> 1) + 2400L - 352L; + area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); + + /* Transmitter Main divider coefficient */ + area[13] = (freq >> 1) + 2400L; + area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); + + /* Others part of the area are flags, bit streams or unused... */ + + /* Set the value in the DAC */ + dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80); + dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF); + + /* Write the first area */ + fee_write(base, 0x00, + area, 16); + + /* Write the DAC */ + fee_write(base, 0x60, + dac, 2); + + /* We now should verify here that the EEprom writting was ok */ + + /* ReRead the first area */ + fee_read(base, 0x00, + area_verify, 16); + + /* ReRead the DAC */ + fee_read(base, 0x60, + dac_verify, 2); + + /* Compare */ + if(memcmp(area, area_verify, 16 * 2) || + memcmp(dac, dac_verify, 2 * 2)) + { +#ifdef DEBUG_IOCTL_ERROR + printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n"); +#endif + return -EOPNOTSUPP; + } + + /* We must download the frequency parameters to the + * synthetisers (from the EEprom - area 1) + * Note : as the EEprom is auto decremented, we set the end + * if the area... */ + mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), + MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); + + /* Wait until the download is finished */ + fee_wait(base, 100, 100); + + /* We must now download the power adjust value (gain) to + * the synthetisers (from the EEprom - area 7 - DAC) */ + mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61); + mmc_out(base, mmwoff(0, mmw_fee_ctrl), + MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); + + /* Wait until the download is finished */ + fee_wait(base, 100, 100); + +#ifdef DEBUG_IOCTL_INFO + /* Verification of what we have done... */ + + printk(KERN_DEBUG "Wavelan EEprom Area 1 :"); + for(i = 0; i < 16; i++) + { + printk(" %04X", + area_verify[i]); + } + printk("\n"); + + printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n", + dac_verify[0], dac_verify[1]); +#endif + + return 0; + } + else + return -EINVAL; /* Bah, never get there... */ +} + +/*------------------------------------------------------------------*/ +/* + * Give the list of available frequencies + */ +static inline int +wv_frequency_list(u_long base, /* i/o port of the card */ + iw_freq * list, /* List of frequency to fill */ + int max) /* Maximum number of frequencies */ +{ + u_short table[10]; /* Authorized frequency table */ + long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */ + int i; /* index in the table */ + const int BAND_NUM = 10; /* Number of bands */ + int c = 0; /* Channel number */ + + /* Read the frequency table */ + fee_read(base, 0x71 /* frequency table */, + table, 10); + + /* Look all frequencies */ + i = 0; + for(freq = 0; freq < 150; freq++) + /* Look in the table if the frequency is allowed */ + if(table[9 - (freq / 16)] & (1 << (freq % 16))) + { + /* Compute approximate channel number */ + while((((channel_bands[c] >> 1) - 24) < freq) && + (c < BAND_NUM)) + c++; + list[i].i = c; /* Set the list index */ + + /* put in the list */ + list[i].m = (((freq + 24) * 5) + 24000L) * 10000; + list[i++].e = 1; + + /* Check number */ + if(i >= max) + return(i); + } + + return(i); +} + +#ifdef IW_WIRELESS_SPY +/*------------------------------------------------------------------*/ +/* + * Gather wireless spy statistics : for each packet, compare the source + * address with out list, and if match, get the stats... + * Sorry, but this function really need wireless extensions... + */ +static inline void +wl_spy_gather(struct net_device * dev, + u_char * mac, /* MAC address */ + u_char * stats) /* Statistics to gather */ +{ + struct iw_quality wstats; + + wstats.qual = stats[2] & MMR_SGNL_QUAL; + wstats.level = stats[0] & MMR_SIGNAL_LVL; + wstats.noise = stats[1] & MMR_SILENCE_LVL; + wstats.updated = 0x7; + + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); +} +#endif /* IW_WIRELESS_SPY */ + +#ifdef HISTOGRAM +/*------------------------------------------------------------------*/ +/* + * This function calculate an histogram on the signal level. + * As the noise is quite constant, it's like doing it on the SNR. + * We have defined a set of interval (lp->his_range), and each time + * the level goes in that interval, we increment the count (lp->his_sum). + * With this histogram you may detect if one wavelan is really weak, + * or you may also calculate the mean and standard deviation of the level... + */ +static inline void +wl_his_gather(struct net_device * dev, + u_char * stats) /* Statistics to gather */ +{ + net_local * lp = netdev_priv(dev); + u_char level = stats[0] & MMR_SIGNAL_LVL; + int i; + + /* Find the correct interval */ + i = 0; + while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++])) + ; + + /* Increment interval counter */ + (lp->his_sum[i])++; +} +#endif /* HISTOGRAM */ + +static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1); +} + +static struct ethtool_ops ops = { + .get_drvinfo = wl_get_drvinfo +}; + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get protocol name + */ +static int wavelan_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + strcpy(wrqu->name, "WaveLAN"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set NWID + */ +static int wavelan_set_nwid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + psa_t psa; + mm_t m; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Set NWID in WaveLAN. */ + if (!wrqu->nwid.disabled) { + /* Set NWID in psa */ + psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8; + psa.psa_nwid[1] = wrqu->nwid.value & 0xFF; + psa.psa_nwid_select = 0x01; + psa_write(dev, + (char *) psa.psa_nwid - (char *) &psa, + (unsigned char *) psa.psa_nwid, 3); + + /* Set NWID in mmc. */ + m.w.mmw_netw_id_l = psa.psa_nwid[1]; + m.w.mmw_netw_id_h = psa.psa_nwid[0]; + mmc_write(base, + (char *) &m.w.mmw_netw_id_l - + (char *) &m, + (unsigned char *) &m.w.mmw_netw_id_l, 2); + mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00); + } else { + /* Disable NWID in the psa. */ + psa.psa_nwid_select = 0x00; + psa_write(dev, + (char *) &psa.psa_nwid_select - + (char *) &psa, + (unsigned char *) &psa.psa_nwid_select, + 1); + + /* Disable NWID in the mmc (no filtering). */ + mmc_out(base, mmwoff(0, mmw_loopt_sel), + MMW_LOOPT_SEL_DIS_NWID); + } + /* update the Wavelan checksum */ + update_psa_checksum(dev); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get NWID + */ +static int wavelan_get_nwid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Read the NWID. */ + psa_read(dev, + (char *) psa.psa_nwid - (char *) &psa, + (unsigned char *) psa.psa_nwid, 3); + wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1]; + wrqu->nwid.disabled = !(psa.psa_nwid_select); + wrqu->nwid.fixed = 1; /* Superfluous */ + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set frequency + */ +static int wavelan_set_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + unsigned long flags; + int ret; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ + if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) + ret = wv_set_frequency(base, &(wrqu->freq)); + else + ret = -EOPNOTSUPP; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get frequency + */ +static int wavelan_get_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). + * Does it work for everybody, especially old cards? */ + if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { + unsigned short freq; + + /* Ask the EEPROM to read the frequency from the first area. */ + fee_read(base, 0x00, &freq, 1); + wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000; + wrqu->freq.e = 1; + } else { + psa_read(dev, + (char *) &psa.psa_subband - (char *) &psa, + (unsigned char *) &psa.psa_subband, 1); + + if (psa.psa_subband <= 4) { + wrqu->freq.m = fixed_bands[psa.psa_subband]; + wrqu->freq.e = (psa.psa_subband != 0); + } else + ret = -EOPNOTSUPP; + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set level threshold + */ +static int wavelan_set_sens(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Set the level threshold. */ + /* We should complain loudly if wrqu->sens.fixed = 0, because we + * can't set auto mode... */ + psa.psa_thr_pre_set = wrqu->sens.value & 0x3F; + psa_write(dev, + (char *) &psa.psa_thr_pre_set - (char *) &psa, + (unsigned char *) &psa.psa_thr_pre_set, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev); + mmc_out(base, mmwoff(0, mmw_thr_pre_set), + psa.psa_thr_pre_set); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get level threshold + */ +static int wavelan_get_sens(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Read the level threshold. */ + psa_read(dev, + (char *) &psa.psa_thr_pre_set - (char *) &psa, + (unsigned char *) &psa.psa_thr_pre_set, 1); + wrqu->sens.value = psa.psa_thr_pre_set & 0x3F; + wrqu->sens.fixed = 1; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set encryption key + */ +static int wavelan_set_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + unsigned long flags; + psa_t psa; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check if capable of encryption */ + if (!mmc_encr(base)) { + ret = -EOPNOTSUPP; + } + + /* Check the size of the key */ + if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) { + ret = -EINVAL; + } + + if(!ret) { + /* Basic checking... */ + if (wrqu->encoding.length == 8) { + /* Copy the key in the driver */ + memcpy(psa.psa_encryption_key, extra, + wrqu->encoding.length); + psa.psa_encryption_select = 1; + + psa_write(dev, + (char *) &psa.psa_encryption_select - + (char *) &psa, + (unsigned char *) &psa. + psa_encryption_select, 8 + 1); + + mmc_out(base, mmwoff(0, mmw_encr_enable), + MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE); + mmc_write(base, mmwoff(0, mmw_encr_key), + (unsigned char *) &psa. + psa_encryption_key, 8); + } + + /* disable encryption */ + if (wrqu->encoding.flags & IW_ENCODE_DISABLED) { + psa.psa_encryption_select = 0; + psa_write(dev, + (char *) &psa.psa_encryption_select - + (char *) &psa, + (unsigned char *) &psa. + psa_encryption_select, 1); + + mmc_out(base, mmwoff(0, mmw_encr_enable), 0); + } + /* update the Wavelan checksum */ + update_psa_checksum(dev); + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get encryption key + */ +static int wavelan_get_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check if encryption is available */ + if (!mmc_encr(base)) { + ret = -EOPNOTSUPP; + } else { + /* Read the encryption key */ + psa_read(dev, + (char *) &psa.psa_encryption_select - + (char *) &psa, + (unsigned char *) &psa. + psa_encryption_select, 1 + 8); + + /* encryption is enabled ? */ + if (psa.psa_encryption_select) + wrqu->encoding.flags = IW_ENCODE_ENABLED; + else + wrqu->encoding.flags = IW_ENCODE_DISABLED; + wrqu->encoding.flags |= mmc_encr(base); + + /* Copy the key to the user buffer */ + wrqu->encoding.length = 8; + memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length); + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +#ifdef WAVELAN_ROAMING_EXT +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set ESSID (domain) + */ +static int wavelan_set_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check if disable */ + if(wrqu->data.flags == 0) + lp->filter_domains = 0; + else { + char essid[IW_ESSID_MAX_SIZE + 1]; + char * endp; + + /* Terminate the string */ + memcpy(essid, extra, wrqu->data.length); + essid[IW_ESSID_MAX_SIZE] = '\0'; + +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "SetEssid : ``%s''\n", essid); +#endif /* DEBUG_IOCTL_INFO */ + + /* Convert to a number (note : Wavelan specific) */ + lp->domain_id = simple_strtoul(essid, &endp, 16); + /* Has it worked ? */ + if(endp > essid) + lp->filter_domains = 1; + else { + lp->filter_domains = 0; + ret = -EINVAL; + } + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get ESSID (domain) + */ +static int wavelan_get_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + + /* Is the domain ID active ? */ + wrqu->data.flags = lp->filter_domains; + + /* Copy Domain ID into a string (Wavelan specific) */ + /* Sound crazy, be we can't have a snprintf in the kernel !!! */ + sprintf(extra, "%lX", lp->domain_id); + extra[IW_ESSID_MAX_SIZE] = '\0'; + + /* Set the length */ + wrqu->data.length = strlen(extra) + 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set AP address + */ +static int wavelan_set_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ +#ifdef DEBUG_IOCTL_INFO + printk(KERN_DEBUG "Set AP to : %02X:%02X:%02X:%02X:%02X:%02X\n", + wrqu->ap_addr.sa_data[0], + wrqu->ap_addr.sa_data[1], + wrqu->ap_addr.sa_data[2], + wrqu->ap_addr.sa_data[3], + wrqu->ap_addr.sa_data[4], + wrqu->ap_addr.sa_data[5]); +#endif /* DEBUG_IOCTL_INFO */ + + return -EOPNOTSUPP; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get AP address + */ +static int wavelan_get_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + /* Should get the real McCoy instead of own Ethernet address */ + memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE); + wrqu->ap_addr.sa_family = ARPHRD_ETHER; + + return -EOPNOTSUPP; +} +#endif /* WAVELAN_ROAMING_EXT */ + +#ifdef WAVELAN_ROAMING +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set mode + */ +static int wavelan_set_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + unsigned long flags; + int ret = 0; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Check mode */ + switch(wrqu->mode) { + case IW_MODE_ADHOC: + if(do_roaming) { + wv_roam_cleanup(dev); + do_roaming = 0; + } + break; + case IW_MODE_INFRA: + if(!do_roaming) { + wv_roam_init(dev); + do_roaming = 1; + } + break; + default: + ret = -EINVAL; + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get mode + */ +static int wavelan_get_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + if(do_roaming) + wrqu->mode = IW_MODE_INFRA; + else + wrqu->mode = IW_MODE_ADHOC; + + return 0; +} +#endif /* WAVELAN_ROAMING */ + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get range info + */ +static int wavelan_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + struct iw_range *range = (struct iw_range *) extra; + unsigned long flags; + int ret = 0; + + /* Set the length (very important for backward compatibility) */ + wrqu->data.length = sizeof(struct iw_range); + + /* Set all the info we don't care or don't know about to zero */ + memset(range, 0, sizeof(struct iw_range)); + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 9; + + /* Set information in the range struct. */ + range->throughput = 1.4 * 1000 * 1000; /* don't argue on this ! */ + range->min_nwid = 0x0000; + range->max_nwid = 0xFFFF; + + range->sensitivity = 0x3F; + range->max_qual.qual = MMR_SGNL_QUAL; + range->max_qual.level = MMR_SIGNAL_LVL; + range->max_qual.noise = MMR_SILENCE_LVL; + range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */ + /* Need to get better values for those two */ + range->avg_qual.level = 30; + range->avg_qual.noise = 8; + + range->num_bitrates = 1; + range->bitrate[0] = 2000000; /* 2 Mb/s */ + + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) | + IW_EVENT_CAPA_MASK(0x8B04) | + IW_EVENT_CAPA_MASK(0x8B06)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ + if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { + range->num_channels = 10; + range->num_frequency = wv_frequency_list(base, range->freq, + IW_MAX_FREQUENCIES); + } else + range->num_channels = range->num_frequency = 0; + + /* Encryption supported ? */ + if (mmc_encr(base)) { + range->encoding_size[0] = 8; /* DES = 64 bits key */ + range->num_encoding_sizes = 1; + range->max_encoding_tokens = 1; /* Only one key possible */ + } else { + range->num_encoding_sizes = 0; + range->max_encoding_tokens = 0; + } + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return ret; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : set quality threshold + */ +static int wavelan_set_qthr(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + kio_addr_t base = dev->base_addr; + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + psa.psa_quality_thr = *(extra) & 0x0F; + psa_write(dev, + (char *) &psa.psa_quality_thr - (char *) &psa, + (unsigned char *) &psa.psa_quality_thr, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev); + mmc_out(base, mmwoff(0, mmw_quality_thr), + psa.psa_quality_thr); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get quality threshold + */ +static int wavelan_get_qthr(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + psa_t psa; + unsigned long flags; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + psa_read(dev, + (char *) &psa.psa_quality_thr - (char *) &psa, + (unsigned char *) &psa.psa_quality_thr, 1); + *(extra) = psa.psa_quality_thr & 0x0F; + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return 0; +} + +#ifdef WAVELAN_ROAMING +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : set roaming + */ +static int wavelan_set_roam(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + unsigned long flags; + + /* Disable interrupts and save flags. */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Note : should check if user == root */ + if(do_roaming && (*extra)==0) + wv_roam_cleanup(dev); + else if(do_roaming==0 && (*extra)!=0) + wv_roam_init(dev); + + do_roaming = (*extra); + + /* Enable interrupts and restore flags. */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get quality threshold + */ +static int wavelan_get_roam(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + *(extra) = do_roaming; + + return 0; +} +#endif /* WAVELAN_ROAMING */ + +#ifdef HISTOGRAM +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : set histogram + */ +static int wavelan_set_histo(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + + /* Check the number of intervals. */ + if (wrqu->data.length > 16) { + return(-E2BIG); + } + + /* Disable histo while we copy the addresses. + * As we don't disable interrupts, we need to do this */ + lp->his_number = 0; + + /* Are there ranges to copy? */ + if (wrqu->data.length > 0) { + /* Copy interval ranges to the driver */ + memcpy(lp->his_range, extra, wrqu->data.length); + + { + int i; + printk(KERN_DEBUG "Histo :"); + for(i = 0; i < wrqu->data.length; i++) + printk(" %d", lp->his_range[i]); + printk("\n"); + } + + /* Reset result structure. */ + memset(lp->his_sum, 0x00, sizeof(long) * 16); + } + + /* Now we can set the number of ranges */ + lp->his_number = wrqu->data.length; + + return(0); +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get histogram + */ +static int wavelan_get_histo(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + net_local *lp = netdev_priv(dev); + + /* Set the number of intervals. */ + wrqu->data.length = lp->his_number; + + /* Give back the distribution statistics */ + if(lp->his_number > 0) + memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number); + + return(0); +} +#endif /* HISTOGRAM */ + +/*------------------------------------------------------------------*/ +/* + * Structures to export the Wireless Handlers + */ + +static const struct iw_priv_args wavelan_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" }, + { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" }, + { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" }, + { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" }, + { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" }, + { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" }, +}; + +static const iw_handler wavelan_handler[] = +{ + NULL, /* SIOCSIWNAME */ + wavelan_get_name, /* SIOCGIWNAME */ + wavelan_set_nwid, /* SIOCSIWNWID */ + wavelan_get_nwid, /* SIOCGIWNWID */ + wavelan_set_freq, /* SIOCSIWFREQ */ + wavelan_get_freq, /* SIOCGIWFREQ */ +#ifdef WAVELAN_ROAMING + wavelan_set_mode, /* SIOCSIWMODE */ + wavelan_get_mode, /* SIOCGIWMODE */ +#else /* WAVELAN_ROAMING */ + NULL, /* SIOCSIWMODE */ + NULL, /* SIOCGIWMODE */ +#endif /* WAVELAN_ROAMING */ + wavelan_set_sens, /* SIOCSIWSENS */ + wavelan_get_sens, /* SIOCGIWSENS */ + NULL, /* SIOCSIWRANGE */ + wavelan_get_range, /* SIOCGIWRANGE */ + NULL, /* SIOCSIWPRIV */ + NULL, /* SIOCGIWPRIV */ + NULL, /* SIOCSIWSTATS */ + NULL, /* SIOCGIWSTATS */ + iw_handler_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ +#ifdef WAVELAN_ROAMING_EXT + wavelan_set_wap, /* SIOCSIWAP */ + wavelan_get_wap, /* SIOCGIWAP */ + NULL, /* -- hole -- */ + NULL, /* SIOCGIWAPLIST */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + wavelan_set_essid, /* SIOCSIWESSID */ + wavelan_get_essid, /* SIOCGIWESSID */ +#else /* WAVELAN_ROAMING_EXT */ + NULL, /* SIOCSIWAP */ + NULL, /* SIOCGIWAP */ + NULL, /* -- hole -- */ + NULL, /* SIOCGIWAPLIST */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWESSID */ + NULL, /* SIOCGIWESSID */ +#endif /* WAVELAN_ROAMING_EXT */ + NULL, /* SIOCSIWNICKN */ + NULL, /* SIOCGIWNICKN */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + NULL, /* SIOCSIWRATE */ + NULL, /* SIOCGIWRATE */ + NULL, /* SIOCSIWRTS */ + NULL, /* SIOCGIWRTS */ + NULL, /* SIOCSIWFRAG */ + NULL, /* SIOCGIWFRAG */ + NULL, /* SIOCSIWTXPOW */ + NULL, /* SIOCGIWTXPOW */ + NULL, /* SIOCSIWRETRY */ + NULL, /* SIOCGIWRETRY */ + wavelan_set_encode, /* SIOCSIWENCODE */ + wavelan_get_encode, /* SIOCGIWENCODE */ +}; + +static const iw_handler wavelan_private_handler[] = +{ + wavelan_set_qthr, /* SIOCIWFIRSTPRIV */ + wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */ +#ifdef WAVELAN_ROAMING + wavelan_set_roam, /* SIOCIWFIRSTPRIV + 2 */ + wavelan_get_roam, /* SIOCIWFIRSTPRIV + 3 */ +#else /* WAVELAN_ROAMING */ + NULL, /* SIOCIWFIRSTPRIV + 2 */ + NULL, /* SIOCIWFIRSTPRIV + 3 */ +#endif /* WAVELAN_ROAMING */ +#ifdef HISTOGRAM + wavelan_set_histo, /* SIOCIWFIRSTPRIV + 4 */ + wavelan_get_histo, /* SIOCIWFIRSTPRIV + 5 */ +#endif /* HISTOGRAM */ +}; + +static const struct iw_handler_def wavelan_handler_def = +{ + .num_standard = sizeof(wavelan_handler)/sizeof(iw_handler), + .num_private = sizeof(wavelan_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(wavelan_private_args)/sizeof(struct iw_priv_args), + .standard = wavelan_handler, + .private = wavelan_private_handler, + .private_args = wavelan_private_args, + .get_wireless_stats = wavelan_get_wireless_stats, +}; + +/*------------------------------------------------------------------*/ +/* + * Get wireless statistics + * Called by /proc/net/wireless... + */ +static iw_stats * +wavelan_get_wireless_stats(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + net_local * lp = netdev_priv(dev); + mmr_t m; + iw_stats * wstats; + unsigned long flags; + +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name); +#endif + + /* Disable interrupts & save flags */ + spin_lock_irqsave(&lp->spinlock, flags); + + wstats = &lp->wstats; + + /* Get data from the mmc */ + mmc_out(base, mmwoff(0, mmw_freeze), 1); + + mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1); + mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2); + mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4); + + mmc_out(base, mmwoff(0, mmw_freeze), 0); + + /* Copy data to wireless stuff */ + wstats->status = m.mmr_dce_status & MMR_DCE_STATUS; + wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL; + wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL; + wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL; + wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) | + ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) | + ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5)); + wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; + wstats->discard.code = 0L; + wstats->discard.misc = 0L; + + /* ReEnable interrupts & restore flags */ + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_IOCTL_TRACE + printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name); +#endif + return &lp->wstats; +} +#endif /* WIRELESS_EXT */ + +/************************* PACKET RECEPTION *************************/ +/* + * This part deal with receiving the packets. + * The interrupt handler get an interrupt when a packet has been + * successfully received and called this part... + */ + +/*------------------------------------------------------------------*/ +/* + * Calculate the starting address of the frame pointed to by the receive + * frame pointer and verify that the frame seem correct + * (called by wv_packet_rcv()) + */ +static inline int +wv_start_of_frame(struct net_device * dev, + int rfp, /* end of frame */ + int wrap) /* start of buffer */ +{ + kio_addr_t base = dev->base_addr; + int rp; + int len; + + rp = (rfp - 5 + RX_SIZE) % RX_SIZE; + outb(rp & 0xff, PIORL(base)); + outb(((rp >> 8) & PIORH_MASK), PIORH(base)); + len = inb(PIOP(base)); + len |= inb(PIOP(base)) << 8; + + /* Sanity checks on size */ + /* Frame too big */ + if(len > MAXDATAZ + 100) + { +#ifdef DEBUG_RX_ERROR + printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n", + dev->name, rfp, len); +#endif + return(-1); + } + + /* Frame too short */ + if(len < 7) + { +#ifdef DEBUG_RX_ERROR + printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n", + dev->name, rfp, len); +#endif + return(-1); + } + + /* Wrap around buffer */ + if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE)) /* magic formula ! */ + { +#ifdef DEBUG_RX_ERROR + printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n", + dev->name, wrap, rfp, len); +#endif + return(-1); + } + + return((rp - len + RX_SIZE) % RX_SIZE); +} /* wv_start_of_frame */ + +/*------------------------------------------------------------------*/ +/* + * This routine does the actual copy of data (including the ethernet + * header structure) from the WaveLAN card to an sk_buff chain that + * will be passed up to the network interface layer. NOTE: We + * currently don't handle trailer protocols (neither does the rest of + * the network interface), so if that is needed, it will (at least in + * part) be added here. The contents of the receive ring buffer are + * copied to a message chain that is then passed to the kernel. + * + * Note: if any errors occur, the packet is "dropped on the floor" + * (called by wv_packet_rcv()) + */ +static inline void +wv_packet_read(struct net_device * dev, + int fd_p, + int sksize) +{ + net_local * lp = netdev_priv(dev); + struct sk_buff * skb; + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n", + dev->name, fd_p, sksize); +#endif + + /* Allocate some buffer for the new packet */ + if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL) + { +#ifdef DEBUG_RX_ERROR + printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n", + dev->name, sksize); +#endif + lp->stats.rx_dropped++; + /* + * Not only do we want to return here, but we also need to drop the + * packet on the floor to clear the interrupt. + */ + return; + } + + skb->dev = dev; + + skb_reserve(skb, 2); + fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize); + skb->protocol = eth_type_trans(skb, dev); + +#ifdef DEBUG_RX_INFO + wv_packet_info(skb->mac.raw, sksize, dev->name, "wv_packet_read"); +#endif /* DEBUG_RX_INFO */ + + /* Statistics gathering & stuff associated. + * It seem a bit messy with all the define, but it's really simple... */ + if( +#ifdef IW_WIRELESS_SPY + (lp->spy_data.spy_number > 0) || +#endif /* IW_WIRELESS_SPY */ +#ifdef HISTOGRAM + (lp->his_number > 0) || +#endif /* HISTOGRAM */ +#ifdef WAVELAN_ROAMING + (do_roaming) || +#endif /* WAVELAN_ROAMING */ + 0) + { + u_char stats[3]; /* Signal level, Noise level, Signal quality */ + + /* read signal level, silence level and signal quality bytes */ + fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE, + stats, 3); +#ifdef DEBUG_RX_INFO + printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n", + dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F); +#endif + +#ifdef WAVELAN_ROAMING + if(do_roaming) + if(WAVELAN_BEACON(skb->data)) + wl_roam_gather(dev, skb->data, stats); +#endif /* WAVELAN_ROAMING */ + +#ifdef WIRELESS_SPY + wl_spy_gather(dev, skb->mac.raw + WAVELAN_ADDR_SIZE, stats); +#endif /* WIRELESS_SPY */ +#ifdef HISTOGRAM + wl_his_gather(dev, stats); +#endif /* HISTOGRAM */ + } + + /* + * Hand the packet to the Network Module + */ + netif_rx(skb); + + /* Keep stats up to date */ + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += sksize; + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name); +#endif + return; +} + +/*------------------------------------------------------------------*/ +/* + * This routine is called by the interrupt handler to initiate a + * packet transfer from the card to the network interface layer above + * this driver. This routine checks if a buffer has been successfully + * received by the WaveLAN card. If so, the routine wv_packet_read is + * called to do the actual transfer of the card's data including the + * ethernet header into a packet consisting of an sk_buff chain. + * (called by wavelan_interrupt()) + * Note : the spinlock is already grabbed for us and irq are disabled. + */ +static inline void +wv_packet_rcv(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + net_local * lp = netdev_priv(dev); + int newrfp; + int rp; + int len; + int f_start; + int status; + int i593_rfp; + int stat_ptr; + u_char c[4]; + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name); +#endif + + /* Get the new receive frame pointer from the i82593 chip */ + outb(CR0_STATUS_2 | OP0_NOP, LCCR(base)); + i593_rfp = inb(LCSR(base)); + i593_rfp |= inb(LCSR(base)) << 8; + i593_rfp %= RX_SIZE; + + /* Get the new receive frame pointer from the WaveLAN card. + * It is 3 bytes more than the increment of the i82593 receive + * frame pointer, for each packet. This is because it includes the + * 3 roaming bytes added by the mmc. + */ + newrfp = inb(RPLL(base)); + newrfp |= inb(RPLH(base)) << 8; + newrfp %= RX_SIZE; + +#ifdef DEBUG_RX_INFO + printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n", + dev->name, i593_rfp, lp->stop, newrfp, lp->rfp); +#endif + +#ifdef DEBUG_RX_ERROR + /* If no new frame pointer... */ + if(lp->overrunning || newrfp == lp->rfp) + printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n", + dev->name, i593_rfp, lp->stop, newrfp, lp->rfp); +#endif + + /* Read all frames (packets) received */ + while(newrfp != lp->rfp) + { + /* A frame is composed of the packet, followed by a status word, + * the length of the frame (word) and the mmc info (SNR & qual). + * It's because the length is at the end that we can only scan + * frames backward. */ + + /* Find the first frame by skipping backwards over the frames */ + rp = newrfp; /* End of last frame */ + while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) && + (f_start != -1)) + rp = f_start; + + /* If we had a problem */ + if(f_start == -1) + { +#ifdef DEBUG_RX_ERROR + printk(KERN_INFO "wavelan_cs: cannot find start of frame "); + printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n", + i593_rfp, lp->stop, newrfp, lp->rfp); +#endif + lp->rfp = rp; /* Get to the last usable frame */ + continue; + } + + /* f_start point to the beggining of the first frame received + * and rp to the beggining of the next one */ + + /* Read status & length of the frame */ + stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE; + stat_ptr = read_ringbuf(dev, stat_ptr, c, 4); + status = c[0] | (c[1] << 8); + len = c[2] | (c[3] << 8); + + /* Check status */ + if((status & RX_RCV_OK) != RX_RCV_OK) + { + lp->stats.rx_errors++; + if(status & RX_NO_SFD) + lp->stats.rx_frame_errors++; + if(status & RX_CRC_ERR) + lp->stats.rx_crc_errors++; + if(status & RX_OVRRUN) + lp->stats.rx_over_errors++; + +#ifdef DEBUG_RX_FAIL + printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n", + dev->name, status); +#endif + } + else + /* Read the packet and transmit to Linux */ + wv_packet_read(dev, f_start, len - 2); + + /* One frame has been processed, skip it */ + lp->rfp = rp; + } + + /* + * Update the frame stop register, but set it to less than + * the full 8K to allow space for 3 bytes of signal strength + * per packet. + */ + lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE; + outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base)); + outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base)); + outb(OP1_SWIT_TO_PORT_0, LCCR(base)); + +#ifdef DEBUG_RX_TRACE + printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name); +#endif +} + +/*********************** PACKET TRANSMISSION ***********************/ +/* + * This part deal with sending packet through the wavelan + * We copy the packet to the send buffer and then issue the send + * command to the i82593. The result of this operation will be + * checked in wavelan_interrupt() + */ + +/*------------------------------------------------------------------*/ +/* + * This routine fills in the appropriate registers and memory + * locations on the WaveLAN card and starts the card off on + * the transmit. + * (called in wavelan_packet_xmit()) + */ +static inline void +wv_packet_write(struct net_device * dev, + void * buf, + short length) +{ + net_local * lp = netdev_priv(dev); + kio_addr_t base = dev->base_addr; + unsigned long flags; + int clen = length; + register u_short xmtdata_base = TX_BASE; + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length); +#endif + + spin_lock_irqsave(&lp->spinlock, flags); + + /* Write the length of data buffer followed by the buffer */ + outb(xmtdata_base & 0xff, PIORL(base)); + outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); + outb(clen & 0xff, PIOP(base)); /* lsb */ + outb(clen >> 8, PIOP(base)); /* msb */ + + /* Send the data */ + outsb(PIOP(base), buf, clen); + + /* Indicate end of transmit chain */ + outb(OP0_NOP, PIOP(base)); + /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */ + outb(OP0_NOP, PIOP(base)); + + /* Reset the transmit DMA pointer */ + hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); + hacr_write(base, HACR_DEFAULT); + /* Send the transmit command */ + wv_82593_cmd(dev, "wv_packet_write(): transmit", + OP0_TRANSMIT, SR0_NO_RESULT); + + /* Make sure the watchdog will keep quiet for a while */ + dev->trans_start = jiffies; + + /* Keep stats up to date */ + lp->stats.tx_bytes += length; + + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_TX_INFO + wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write"); +#endif /* DEBUG_TX_INFO */ + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * This routine is called when we want to send a packet (NET3 callback) + * In this routine, we check if the harware is ready to accept + * the packet. We also prevent reentrance. Then, we call the function + * to send the packet... + */ +static int +wavelan_packet_xmit(struct sk_buff * skb, + struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + unsigned long flags; + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name, + (unsigned) skb); +#endif + + /* + * Block a timer-based transmit from overlapping a previous transmit. + * In other words, prevent reentering this routine. + */ + netif_stop_queue(dev); + + /* If somebody has asked to reconfigure the controller, + * we can do it now */ + if(lp->reconfig_82593) + { + spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */ + wv_82593_config(dev); + spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */ + /* Note : the configure procedure was totally synchronous, + * so the Tx buffer is now free */ + } + +#ifdef DEBUG_TX_ERROR + if (skb->next) + printk(KERN_INFO "skb has next\n"); +#endif + + /* Check if we need some padding */ + /* Note : on wireless the propagation time is in the order of 1us, + * and we don't have the Ethernet specific requirement of beeing + * able to detect collisions, therefore in theory we don't really + * need to pad. Jean II */ + if (skb->len < ETH_ZLEN) { + skb = skb_padto(skb, ETH_ZLEN); + if (skb == NULL) + return 0; + } + + wv_packet_write(dev, skb->data, skb->len); + + dev_kfree_skb(skb); + +#ifdef DEBUG_TX_TRACE + printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name); +#endif + return(0); +} + +/********************** HARDWARE CONFIGURATION **********************/ +/* + * This part do the real job of starting and configuring the hardware. + */ + +/*------------------------------------------------------------------*/ +/* + * Routine to initialize the Modem Management Controller. + * (called by wv_hw_config()) + */ +static inline int +wv_mmc_init(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + psa_t psa; + mmw_t m; + int configured; + int i; /* Loop counter */ + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name); +#endif + + /* Read the parameter storage area */ + psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); + + /* + * Check the first three octets of the MAC addr for the manufacturer's code. + * Note: If you get the error message below, you've got a + * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on + * how to configure your card... + */ + for(i = 0; i < (sizeof(MAC_ADDRESSES) / sizeof(char) / 3); i++) + if((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) && + (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) && + (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2])) + break; + + /* If we have not found it... */ + if(i == (sizeof(MAC_ADDRESSES) / sizeof(char) / 3)) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n", + dev->name, psa.psa_univ_mac_addr[0], + psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]); +#endif + return FALSE; + } + + /* Get the MAC address */ + memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE); + +#ifdef USE_PSA_CONFIG + configured = psa.psa_conf_status & 1; +#else + configured = 0; +#endif + + /* Is the PSA is not configured */ + if(!configured) + { + /* User will be able to configure NWID after (with iwconfig) */ + psa.psa_nwid[0] = 0; + psa.psa_nwid[1] = 0; + + /* As NWID is not set : no NWID checking */ + psa.psa_nwid_select = 0; + + /* Disable encryption */ + psa.psa_encryption_select = 0; + + /* Set to standard values + * 0x04 for AT, + * 0x01 for MCA, + * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document) + */ + if (psa.psa_comp_number & 1) + psa.psa_thr_pre_set = 0x01; + else + psa.psa_thr_pre_set = 0x04; + psa.psa_quality_thr = 0x03; + + /* It is configured */ + psa.psa_conf_status |= 1; + +#ifdef USE_PSA_CONFIG + /* Write the psa */ + psa_write(dev, (char *)psa.psa_nwid - (char *)&psa, + (unsigned char *)psa.psa_nwid, 4); + psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa, + (unsigned char *)&psa.psa_thr_pre_set, 1); + psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa, + (unsigned char *)&psa.psa_quality_thr, 1); + psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa, + (unsigned char *)&psa.psa_conf_status, 1); + /* update the Wavelan checksum */ + update_psa_checksum(dev); +#endif /* USE_PSA_CONFIG */ + } + + /* Zero the mmc structure */ + memset(&m, 0x00, sizeof(m)); + + /* Copy PSA info to the mmc */ + m.mmw_netw_id_l = psa.psa_nwid[1]; + m.mmw_netw_id_h = psa.psa_nwid[0]; + + if(psa.psa_nwid_select & 1) + m.mmw_loopt_sel = 0x00; + else + m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID; + + memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, + sizeof(m.mmw_encr_key)); + + if(psa.psa_encryption_select) + m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE; + else + m.mmw_encr_enable = 0; + + m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F; + m.mmw_quality_thr = psa.psa_quality_thr & 0x0F; + + /* + * Set default modem control parameters. + * See NCR document 407-0024326 Rev. A. + */ + m.mmw_jabber_enable = 0x01; + m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN; + m.mmw_ifs = 0x20; + m.mmw_mod_delay = 0x04; + m.mmw_jam_time = 0x38; + + m.mmw_des_io_invert = 0; + m.mmw_freeze = 0; + m.mmw_decay_prm = 0; + m.mmw_decay_updat_prm = 0; + + /* Write all info to mmc */ + mmc_write(base, 0, (u_char *)&m, sizeof(m)); + + /* The following code start the modem of the 2.00 frequency + * selectable cards at power on. It's not strictly needed for the + * following boots... + * The original patch was by Joe Finney for the PCMCIA driver, but + * I've cleaned it a bit and add documentation. + * Thanks to Loeke Brederveld from Lucent for the info. + */ + + /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable) + * (does it work for everybody ? - especially old cards...) */ + /* Note : WFREQSEL verify that it is able to read from EEprom + * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID + * is 0xA (Xilinx version) or 0xB (Ariadne version). + * My test is more crude but do work... */ + if(!(mmc_in(base, mmroff(0, mmr_fee_status)) & + (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) + { + /* We must download the frequency parameters to the + * synthetisers (from the EEprom - area 1) + * Note : as the EEprom is auto decremented, we set the end + * if the area... */ + m.mmw_fee_addr = 0x0F; + m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; + mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m, + (unsigned char *)&m.mmw_fee_ctrl, 2); + + /* Wait until the download is finished */ + fee_wait(base, 100, 100); + +#ifdef DEBUG_CONFIG_INFO + /* The frequency was in the last word downloaded... */ + mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m, + (unsigned char *)&m.mmw_fee_data_l, 2); + + /* Print some info for the user */ + printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n", + dev->name, + ((m.mmw_fee_data_h << 4) | + (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L); +#endif + + /* We must now download the power adjust value (gain) to + * the synthetisers (from the EEprom - area 7 - DAC) */ + m.mmw_fee_addr = 0x61; + m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; + mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m, + (unsigned char *)&m.mmw_fee_ctrl, 2); + + /* Wait until the download is finished */ + } /* if 2.00 card */ + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name); +#endif + return TRUE; +} + +/*------------------------------------------------------------------*/ +/* + * Routine to gracefully turn off reception, and wait for any commands + * to complete. + * (called in wv_ru_start() and wavelan_close() and wavelan_event()) + */ +static int +wv_ru_stop(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + net_local * lp = netdev_priv(dev); + unsigned long flags; + int status; + int spin; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name); +#endif + + spin_lock_irqsave(&lp->spinlock, flags); + + /* First, send the LAN controller a stop receive command */ + wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv", + OP0_STOP_RCV, SR0_NO_RESULT); + + /* Then, spin until the receive unit goes idle */ + spin = 300; + do + { + udelay(10); + outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); + status = inb(LCSR(base)); + } + while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0)); + + /* Now, spin until the chip finishes executing its current command */ + do + { + udelay(10); + outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); + status = inb(LCSR(base)); + } + while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0)); + + spin_unlock_irqrestore(&lp->spinlock, flags); + + /* If there was a problem */ + if(spin <= 0) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n", + dev->name); +#endif + return FALSE; + } + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name); +#endif + return TRUE; +} /* wv_ru_stop */ + +/*------------------------------------------------------------------*/ +/* + * This routine starts the receive unit running. First, it checks if + * the card is actually ready. Then the card is instructed to receive + * packets again. + * (called in wv_hw_reset() & wavelan_open()) + */ +static int +wv_ru_start(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + net_local * lp = netdev_priv(dev); + unsigned long flags; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name); +#endif + + /* + * We need to start from a quiescent state. To do so, we could check + * if the card is already running, but instead we just try to shut + * it down. First, we disable reception (in case it was already enabled). + */ + if(!wv_ru_stop(dev)) + return FALSE; + + spin_lock_irqsave(&lp->spinlock, flags); + + /* Now we know that no command is being executed. */ + + /* Set the receive frame pointer and stop pointer */ + lp->rfp = 0; + outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base)); + + /* Reset ring management. This sets the receive frame pointer to 1 */ + outb(OP1_RESET_RING_MNGMT, LCCR(base)); + +#if 0 + /* XXX the i82593 manual page 6-4 seems to indicate that the stop register + should be set as below */ + /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/ +#elif 0 + /* but I set it 0 instead */ + lp->stop = 0; +#else + /* but I set it to 3 bytes per packet less than 8K */ + lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE; +#endif + outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base)); + outb(OP1_INT_ENABLE, LCCR(base)); + outb(OP1_SWIT_TO_PORT_0, LCCR(base)); + + /* Reset receive DMA pointer */ + hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); + hacr_write_slow(base, HACR_DEFAULT); + + /* Receive DMA on channel 1 */ + wv_82593_cmd(dev, "wv_ru_start(): rcv-enable", + CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT); + +#ifdef DEBUG_I82593_SHOW + { + int status; + int opri; + int spin = 10000; + + /* spin until the chip starts receiving */ + do + { + outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); + status = inb(LCSR(base)); + if(spin-- <= 0) + break; + } + while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) && + ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY)); + printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n", + (status & SR3_RCV_STATE_MASK), i); + } +#endif + + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name); +#endif + return TRUE; +} + +/*------------------------------------------------------------------*/ +/* + * This routine does a standard config of the WaveLAN controller (i82593). + * In the ISA driver, this is integrated in wavelan_hardware_reset() + * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit()) + */ +static int +wv_82593_config(struct net_device * dev) +{ + kio_addr_t base = dev->base_addr; + net_local * lp = netdev_priv(dev); + struct i82593_conf_block cfblk; + int ret = TRUE; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name); +#endif + + /* Create & fill i82593 config block + * + * Now conform to Wavelan document WCIN085B + */ + memset(&cfblk, 0x00, sizeof(struct i82593_conf_block)); + cfblk.d6mod = FALSE; /* Run in i82593 advanced mode */ + cfblk.fifo_limit = 5; /* = 56 B rx and 40 B tx fifo thresholds */ + cfblk.forgnesi = FALSE; /* 0=82C501, 1=AMD7992B compatibility */ + cfblk.fifo_32 = 1; + cfblk.throttle_enb = FALSE; + cfblk.contin = TRUE; /* enable continuous mode */ + cfblk.cntrxint = FALSE; /* enable continuous mode receive interrupts */ + cfblk.addr_len = WAVELAN_ADDR_SIZE; + cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */ + cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */ + cfblk.loopback = FALSE; + cfblk.lin_prio = 0; /* conform to 802.3 backoff algoritm */ + cfblk.exp_prio = 5; /* conform to 802.3 backoff algoritm */ + cfblk.bof_met = 1; /* conform to 802.3 backoff algoritm */ + cfblk.ifrm_spc = 0x20; /* 32 bit times interframe spacing */ + cfblk.slottim_low = 0x20; /* 32 bit times slot time */ + cfblk.slottim_hi = 0x0; + cfblk.max_retr = 15; + cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE); /* Promiscuous mode */ + cfblk.bc_dis = FALSE; /* Enable broadcast reception */ + cfblk.crs_1 = TRUE; /* Transmit without carrier sense */ + cfblk.nocrc_ins = FALSE; /* i82593 generates CRC */ + cfblk.crc_1632 = FALSE; /* 32-bit Autodin-II CRC */ + cfblk.crs_cdt = FALSE; /* CD not to be interpreted as CS */ + cfblk.cs_filter = 0; /* CS is recognized immediately */ + cfblk.crs_src = FALSE; /* External carrier sense */ + cfblk.cd_filter = 0; /* CD is recognized immediately */ + cfblk.min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length 64 bytes */ + cfblk.lng_typ = FALSE; /* Length field > 1500 = type field */ + cfblk.lng_fld = TRUE; /* Disable 802.3 length field check */ + cfblk.rxcrc_xf = TRUE; /* Don't transfer CRC to memory */ + cfblk.artx = TRUE; /* Disable automatic retransmission */ + cfblk.sarec = TRUE; /* Disable source addr trig of CD */ + cfblk.tx_jabber = TRUE; /* Disable jabber jam sequence */ + cfblk.hash_1 = FALSE; /* Use bits 0-5 in mc address hash */ + cfblk.lbpkpol = TRUE; /* Loopback pin active high */ + cfblk.fdx = FALSE; /* Disable full duplex operation */ + cfblk.dummy_6 = 0x3f; /* all ones */ + cfblk.mult_ia = FALSE; /* No multiple individual addresses */ + cfblk.dis_bof = FALSE; /* Disable the backoff algorithm ?! */ + cfblk.dummy_1 = TRUE; /* set to 1 */ + cfblk.tx_ifs_retrig = 3; /* Hmm... Disabled */ +#ifdef MULTICAST_ALL + cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE); /* Allow all multicasts */ +#else + cfblk.mc_all = FALSE; /* No multicast all mode */ +#endif + cfblk.rcv_mon = 0; /* Monitor mode disabled */ + cfblk.frag_acpt = TRUE; /* Do not accept fragments */ + cfblk.tstrttrs = FALSE; /* No start transmission threshold */ + cfblk.fretx = TRUE; /* FIFO automatic retransmission */ + cfblk.syncrqs = FALSE; /* Synchronous DRQ deassertion... */ + cfblk.sttlen = TRUE; /* 6 byte status registers */ + cfblk.rx_eop = TRUE; /* Signal EOP on packet reception */ + cfblk.tx_eop = TRUE; /* Signal EOP on packet transmission */ + cfblk.rbuf_size = RX_SIZE>>11; /* Set receive buffer size */ + cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */ + +#ifdef DEBUG_I82593_SHOW + { + u_char *c = (u_char *) &cfblk; + int i; + printk(KERN_DEBUG "wavelan_cs: config block:"); + for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++) + { + if((i % 16) == 0) printk("\n" KERN_DEBUG); + printk("%02x ", *c); + } + printk("\n"); + } +#endif + + /* Copy the config block to the i82593 */ + outb(TX_BASE & 0xff, PIORL(base)); + outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); + outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base)); /* lsb */ + outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base)); /* msb */ + outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block)); + + /* reset transmit DMA pointer */ + hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); + hacr_write(base, HACR_DEFAULT); + if(!wv_82593_cmd(dev, "wv_82593_config(): configure", + OP0_CONFIGURE, SR0_CONFIGURE_DONE)) + ret = FALSE; + + /* Initialize adapter's ethernet MAC address */ + outb(TX_BASE & 0xff, PIORL(base)); + outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); + outb(WAVELAN_ADDR_SIZE, PIOP(base)); /* byte count lsb */ + outb(0, PIOP(base)); /* byte count msb */ + outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE); + + /* reset transmit DMA pointer */ + hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); + hacr_write(base, HACR_DEFAULT); + if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup", + OP0_IA_SETUP, SR0_IA_SETUP_DONE)) + ret = FALSE; + +#ifdef WAVELAN_ROAMING + /* If roaming is enabled, join the "Beacon Request" multicast group... */ + /* But only if it's not in there already! */ + if(do_roaming) + dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1); +#endif /* WAVELAN_ROAMING */ + + /* If any multicast address to set */ + if(lp->mc_count) + { + struct dev_mc_list * dmi; + int addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count; + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n", + dev->name, lp->mc_count); + for(dmi=dev->mc_list; dmi; dmi=dmi->next) + printk(KERN_DEBUG " %02x:%02x:%02x:%02x:%02x:%02x\n", + dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], + dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5] ); +#endif + + /* Initialize adapter's ethernet multicast addresses */ + outb(TX_BASE & 0xff, PIORL(base)); + outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); + outb(addrs_len & 0xff, PIOP(base)); /* byte count lsb */ + outb((addrs_len >> 8), PIOP(base)); /* byte count msb */ + for(dmi=dev->mc_list; dmi; dmi=dmi->next) + outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen); + + /* reset transmit DMA pointer */ + hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); + hacr_write(base, HACR_DEFAULT); + if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup", + OP0_MC_SETUP, SR0_MC_SETUP_DONE)) + ret = FALSE; + lp->mc_count = dev->mc_count; /* remember to avoid repeated reset */ + } + + /* Job done, clear the flag */ + lp->reconfig_82593 = FALSE; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name); +#endif + return(ret); +} + +/*------------------------------------------------------------------*/ +/* + * Read the Access Configuration Register, perform a software reset, + * and then re-enable the card's software. + * + * If I understand correctly : reset the pcmcia interface of the + * wavelan. + * (called by wv_config()) + */ +static inline int +wv_pcmcia_reset(struct net_device * dev) +{ + int i; + conf_reg_t reg = { 0, CS_READ, CISREG_COR, 0 }; + dev_link_t * link = ((net_local *)netdev_priv(dev))->link; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name); +#endif + + i = pcmcia_access_configuration_register(link->handle, ®); + if(i != CS_SUCCESS) + { + cs_error(link->handle, AccessConfigurationRegister, i); + return FALSE; + } + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n", + dev->name, (u_int) reg.Value); +#endif + + reg.Action = CS_WRITE; + reg.Value = reg.Value | COR_SW_RESET; + i = pcmcia_access_configuration_register(link->handle, ®); + if(i != CS_SUCCESS) + { + cs_error(link->handle, AccessConfigurationRegister, i); + return FALSE; + } + + reg.Action = CS_WRITE; + reg.Value = COR_LEVEL_IRQ | COR_CONFIG; + i = pcmcia_access_configuration_register(link->handle, ®); + if(i != CS_SUCCESS) + { + cs_error(link->handle, AccessConfigurationRegister, i); + return FALSE; + } + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name); +#endif + return TRUE; +} + +/*------------------------------------------------------------------*/ +/* + * wavelan_hw_config() is called after a CARD_INSERTION event is + * received, to configure the wavelan hardware. + * Note that the reception will be enabled in wavelan->open(), so the + * device is configured but idle... + * Performs the following actions: + * 1. A pcmcia software reset (using wv_pcmcia_reset()) + * 2. A power reset (reset DMA) + * 3. Reset the LAN controller + * 4. Initialize the radio modem (using wv_mmc_init) + * 5. Configure LAN controller (using wv_82593_config) + * 6. Perform a diagnostic on the LAN controller + * (called by wavelan_event() & wv_hw_reset()) + */ +static int +wv_hw_config(struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + kio_addr_t base = dev->base_addr; + unsigned long flags; + int ret = FALSE; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name); +#endif + +#ifdef STRUCT_CHECK + if(wv_structuct_check() != (char *) NULL) + { + printk(KERN_WARNING "%s: wv_hw_config: structure/compiler botch: \"%s\"\n", + dev->name, wv_structuct_check()); + return FALSE; + } +#endif /* STRUCT_CHECK == 1 */ + + /* Reset the pcmcia interface */ + if(wv_pcmcia_reset(dev) == FALSE) + return FALSE; + + /* Disable interrupts */ + spin_lock_irqsave(&lp->spinlock, flags); + + /* Disguised goto ;-) */ + do + { + /* Power UP the module + reset the modem + reset host adapter + * (in fact, reset DMA channels) */ + hacr_write_slow(base, HACR_RESET); + hacr_write(base, HACR_DEFAULT); + + /* Check if the module has been powered up... */ + if(hasr_read(base) & HASR_NO_CLK) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n", + dev->name); +#endif + break; + } + + /* initialize the modem */ + if(wv_mmc_init(dev) == FALSE) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n", + dev->name); +#endif + break; + } + + /* reset the LAN controller (i82593) */ + outb(OP0_RESET, LCCR(base)); + mdelay(1); /* A bit crude ! */ + + /* Initialize the LAN controller */ + if(wv_82593_config(dev) == FALSE) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n", + dev->name); +#endif + break; + } + + /* Diagnostic */ + if(wv_diag(dev) == FALSE) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n", + dev->name); +#endif + break; + } + + /* + * insert code for loopback test here + */ + + /* The device is now configured */ + lp->configured = 1; + ret = TRUE; + } + while(0); + + /* Re-enable interrupts */ + spin_unlock_irqrestore(&lp->spinlock, flags); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name); +#endif + return(ret); +} + +/*------------------------------------------------------------------*/ +/* + * Totally reset the wavelan and restart it. + * Performs the following actions: + * 1. Call wv_hw_config() + * 2. Start the LAN controller's receive unit + * (called by wavelan_event(), wavelan_watchdog() and wavelan_open()) + */ +static inline void +wv_hw_reset(struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name); +#endif + + lp->nresets++; + lp->configured = 0; + + /* Call wv_hw_config() for most of the reset & init stuff */ + if(wv_hw_config(dev) == FALSE) + return; + + /* start receive unit */ + wv_ru_start(dev); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * wv_pcmcia_config() is called after a CARD_INSERTION event is + * received, to configure the PCMCIA socket, and to make the ethernet + * device available to the system. + * (called by wavelan_event()) + */ +static inline int +wv_pcmcia_config(dev_link_t * link) +{ + client_handle_t handle = link->handle; + tuple_t tuple; + cisparse_t parse; + struct net_device * dev = (struct net_device *) link->priv; + int i; + u_char buf[64]; + win_req_t req; + memreq_t mem; + net_local * lp = netdev_priv(dev); + + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link); +#endif + + /* + * This reads the card's CONFIG tuple to find its configuration + * registers. + */ + do + { + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CONFIG; + i = pcmcia_get_first_tuple(handle, &tuple); + if(i != CS_SUCCESS) + break; + tuple.TupleData = (cisdata_t *)buf; + tuple.TupleDataMax = 64; + tuple.TupleOffset = 0; + i = pcmcia_get_tuple_data(handle, &tuple); + if(i != CS_SUCCESS) + break; + i = pcmcia_parse_tuple(handle, &tuple, &parse); + if(i != CS_SUCCESS) + break; + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + } + while(0); + if(i != CS_SUCCESS) + { + cs_error(link->handle, ParseTuple, i); + link->state &= ~DEV_CONFIG_PENDING; + return FALSE; + } + + /* Configure card */ + link->state |= DEV_CONFIG; + do + { + i = pcmcia_request_io(link->handle, &link->io); + if(i != CS_SUCCESS) + { + cs_error(link->handle, RequestIO, i); + break; + } + + /* + * Now allocate an interrupt line. Note that this does not + * actually assign a handler to the interrupt. + */ + i = pcmcia_request_irq(link->handle, &link->irq); + if(i != CS_SUCCESS) + { + cs_error(link->handle, RequestIRQ, i); + break; + } + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping. + */ + link->conf.ConfigIndex = 1; + i = pcmcia_request_configuration(link->handle, &link->conf); + if(i != CS_SUCCESS) + { + cs_error(link->handle, RequestConfiguration, i); + break; + } + + /* + * Allocate a small memory window. Note that the dev_link_t + * structure provides space for one window handle -- if your + * device needs several windows, you'll need to keep track of + * the handles in your private data structure, link->priv. + */ + req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + req.Base = req.Size = 0; + req.AccessSpeed = mem_speed; + i = pcmcia_request_window(&link->handle, &req, &link->win); + if(i != CS_SUCCESS) + { + cs_error(link->handle, RequestWindow, i); + break; + } + + lp->mem = ioremap(req.Base, req.Size); + dev->mem_start = (u_long)lp->mem; + dev->mem_end = dev->mem_start + req.Size; + + mem.CardOffset = 0; mem.Page = 0; + i = pcmcia_map_mem_page(link->win, &mem); + if(i != CS_SUCCESS) + { + cs_error(link->handle, MapMemPage, i); + break; + } + + /* Feed device with this info... */ + dev->irq = link->irq.AssignedIRQ; + dev->base_addr = link->io.BasePort1; + netif_start_queue(dev); + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n", + lp->mem, dev->irq, (u_int) dev->base_addr); +#endif + + SET_NETDEV_DEV(dev, &handle_to_dev(handle)); + i = register_netdev(dev); + if(i != 0) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n"); +#endif + break; + } + } + while(0); /* Humm... Disguised goto !!! */ + + link->state &= ~DEV_CONFIG_PENDING; + /* If any step failed, release any partially configured state */ + if(i != 0) + { + wv_pcmcia_release(link); + return FALSE; + } + + strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name); + link->dev = &((net_local *) netdev_priv(dev))->node; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "<-wv_pcmcia_config()\n"); +#endif + return TRUE; +} + +/*------------------------------------------------------------------*/ +/* + * After a card is removed, wv_pcmcia_release() will unregister the net + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void +wv_pcmcia_release(dev_link_t *link) +{ + struct net_device * dev = (struct net_device *) link->priv; + net_local * lp = netdev_priv(dev); + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link); +#endif + + /* Don't bother checking to see if these succeed or not */ + iounmap(lp->mem); + pcmcia_release_window(link->win); + pcmcia_release_configuration(link->handle); + pcmcia_release_io(link->handle, &link->io); + pcmcia_release_irq(link->handle, &link->irq); + + link->state &= ~DEV_CONFIG; + +#ifdef DEBUG_CONFIG_TRACE + printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name); +#endif +} + +/************************ INTERRUPT HANDLING ************************/ + +/* + * This function is the interrupt handler for the WaveLAN card. This + * routine will be called whenever: + * 1. A packet is received. + * 2. A packet has successfully been transferred and the unit is + * ready to transmit another packet. + * 3. A command has completed execution. + */ +static irqreturn_t +wavelan_interrupt(int irq, + void * dev_id, + struct pt_regs * regs) +{ + struct net_device * dev; + net_local * lp; + kio_addr_t base; + int status0; + u_int tx_status; + + if ((dev = dev_id) == NULL) + { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_WARNING "wavelan_interrupt(): irq %d for unknown device.\n", + irq); +#endif + return IRQ_NONE; + } + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name); +#endif + + lp = netdev_priv(dev); + base = dev->base_addr; + +#ifdef DEBUG_INTERRUPT_INFO + /* Check state of our spinlock (it should be cleared) */ + if(spin_is_locked(&lp->spinlock)) + printk(KERN_DEBUG + "%s: wavelan_interrupt(): spinlock is already locked !!!\n", + dev->name); +#endif + + /* Prevent reentrancy. We need to do that because we may have + * multiple interrupt handler running concurently. + * It is safe because interrupts are disabled before aquiring + * the spinlock. */ + spin_lock(&lp->spinlock); + + /* Treat all pending interrupts */ + while(1) + { + /* ---------------- INTERRUPT CHECKING ---------------- */ + /* + * Look for the interrupt and verify the validity + */ + outb(CR0_STATUS_0 | OP0_NOP, LCCR(base)); + status0 = inb(LCSR(base)); + +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, + (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT); + if(status0&SR0_INTERRUPT) + { + printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" : + ((status0 & SR0_EXECUTION) ? "cmd" : + ((status0 & SR0_RECEPTION) ? "recv" : "unknown")), + (status0 & SR0_EVENT_MASK)); + } + else + printk("\n"); +#endif + + /* Return if no actual interrupt from i82593 (normal exit) */ + if(!(status0 & SR0_INTERRUPT)) + break; + + /* If interrupt is both Rx and Tx or none... + * This code in fact is there to catch the spurious interrupt + * when you remove the wavelan pcmcia card from the socket */ + if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) || + ((status0 & SR0_BOTH_RX_TX) == 0x0)) + { +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n", + dev->name, status0); +#endif + /* Acknowledge the interrupt */ + outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); + break; + } + + /* ----------------- RECEIVING PACKET ----------------- */ + /* + * When the wavelan signal the reception of a new packet, + * we call wv_packet_rcv() to copy if from the buffer and + * send it to NET3 + */ + if(status0 & SR0_RECEPTION) + { +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name); +#endif + + if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) + { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n", + dev->name); +#endif + lp->stats.rx_over_errors++; + lp->overrunning = 1; + } + + /* Get the packet */ + wv_packet_rcv(dev); + lp->overrunning = 0; + + /* Acknowledge the interrupt */ + outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); + continue; + } + + /* ---------------- COMMAND COMPLETION ---------------- */ + /* + * Interrupts issued when the i82593 has completed a command. + * Most likely : transmission done + */ + + /* If a transmission has been done */ + if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE || + (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE || + (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) + { +#ifdef DEBUG_TX_ERROR + if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) + printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n", + dev->name); +#endif + + /* Get transmission status */ + tx_status = inb(LCSR(base)); + tx_status |= (inb(LCSR(base)) << 8); +#ifdef DEBUG_INTERRUPT_INFO + printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n", + dev->name); + { + u_int rcv_bytes; + u_char status3; + rcv_bytes = inb(LCSR(base)); + rcv_bytes |= (inb(LCSR(base)) << 8); + status3 = inb(LCSR(base)); + printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n", + tx_status, rcv_bytes, (u_int) status3); + } +#endif + /* Check for possible errors */ + if((tx_status & TX_OK) != TX_OK) + { + lp->stats.tx_errors++; + + if(tx_status & TX_FRTL) + { +#ifdef DEBUG_TX_ERROR + printk(KERN_INFO "%s: wv_interrupt(): frame too long\n", + dev->name); +#endif + } + if(tx_status & TX_UND_RUN) + { +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n", + dev->name); +#endif + lp->stats.tx_aborted_errors++; + } + if(tx_status & TX_LOST_CTS) + { +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name); +#endif + lp->stats.tx_carrier_errors++; + } + if(tx_status & TX_LOST_CRS) + { +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n", + dev->name); +#endif + lp->stats.tx_carrier_errors++; + } + if(tx_status & TX_HRT_BEAT) + { +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name); +#endif + lp->stats.tx_heartbeat_errors++; + } + if(tx_status & TX_DEFER) + { +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n", + dev->name); +#endif + } + /* Ignore late collisions since they're more likely to happen + * here (the WaveLAN design prevents the LAN controller from + * receiving while it is transmitting). We take action only when + * the maximum retransmit attempts is exceeded. + */ + if(tx_status & TX_COLL) + { + if(tx_status & TX_MAX_COL) + { +#ifdef DEBUG_TX_FAIL + printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n", + dev->name); +#endif + if(!(tx_status & TX_NCOL_MASK)) + { + lp->stats.collisions += 0x10; + } + } + } + } /* if(!(tx_status & TX_OK)) */ + + lp->stats.collisions += (tx_status & TX_NCOL_MASK); + lp->stats.tx_packets++; + + netif_wake_queue(dev); + outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */ + } + else /* if interrupt = transmit done or retransmit done */ + { +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n", + status0); +#endif + outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */ + } + } /* while(1) */ + + spin_unlock(&lp->spinlock); + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name); +#endif + + /* We always return IRQ_HANDLED, because we will receive empty + * interrupts under normal operations. Anyway, it doesn't matter + * as we are dealing with an ISA interrupt that can't be shared. + * + * Explanation : under heavy receive, the following happens : + * ->wavelan_interrupt() + * (status0 & SR0_INTERRUPT) != 0 + * ->wv_packet_rcv() + * (status0 & SR0_INTERRUPT) != 0 + * ->wv_packet_rcv() + * (status0 & SR0_INTERRUPT) == 0 // i.e. no more event + * <-wavelan_interrupt() + * ->wavelan_interrupt() + * (status0 & SR0_INTERRUPT) == 0 // i.e. empty interrupt + * <-wavelan_interrupt() + * Jean II */ + return IRQ_HANDLED; +} /* wv_interrupt */ + +/*------------------------------------------------------------------*/ +/* + * Watchdog: when we start a transmission, a timer is set for us in the + * kernel. If the transmission completes, this timer is disabled. If + * the timer expires, we are called and we try to unlock the hardware. + * + * Note : This watchdog is move clever than the one in the ISA driver, + * because it try to abort the current command before reseting + * everything... + * On the other hand, it's a bit simpler, because we don't have to + * deal with the multiple Tx buffers... + */ +static void +wavelan_watchdog(struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + kio_addr_t base = dev->base_addr; + unsigned long flags; + int aborted = FALSE; + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name); +#endif + +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n", + dev->name); +#endif + + spin_lock_irqsave(&lp->spinlock, flags); + + /* Ask to abort the current command */ + outb(OP0_ABORT, LCCR(base)); + + /* Wait for the end of the command (a bit hackish) */ + if(wv_82593_cmd(dev, "wavelan_watchdog(): abort", + OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED)) + aborted = TRUE; + + /* Release spinlock here so that wv_hw_reset() can grab it */ + spin_unlock_irqrestore(&lp->spinlock, flags); + + /* Check if we were successful in aborting it */ + if(!aborted) + { + /* It seem that it wasn't enough */ +#ifdef DEBUG_INTERRUPT_ERROR + printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n", + dev->name); +#endif + wv_hw_reset(dev); + } + +#ifdef DEBUG_PSA_SHOW + { + psa_t psa; + psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); + wv_psa_show(&psa); + } +#endif +#ifdef DEBUG_MMC_SHOW + wv_mmc_show(dev); +#endif +#ifdef DEBUG_I82593_SHOW + wv_ru_show(dev); +#endif + + /* We are no more waiting for something... */ + netif_wake_queue(dev); + +#ifdef DEBUG_INTERRUPT_TRACE + printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name); +#endif +} + +/********************* CONFIGURATION CALLBACKS *********************/ +/* + * Here are the functions called by the pcmcia package (cardmgr) and + * linux networking (NET3) for initialization, configuration and + * deinstallations of the Wavelan Pcmcia Hardware. + */ + +/*------------------------------------------------------------------*/ +/* + * Configure and start up the WaveLAN PCMCIA adaptor. + * Called by NET3 when it "open" the device. + */ +static int +wavelan_open(struct net_device * dev) +{ + net_local * lp = netdev_priv(dev); + dev_link_t * link = lp->link; + kio_addr_t base = dev->base_addr; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name, + (unsigned int) dev); +#endif + + /* Check if the modem is powered up (wavelan_close() power it down */ + if(hasr_read(base) & HASR_NO_CLK) + { + /* Power up (power up time is 250us) */ + hacr_write(base, HACR_DEFAULT); + + /* Check if the module has been powered up... */ + if(hasr_read(base) & HASR_NO_CLK) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n", + dev->name); +#endif + return FALSE; + } + } + + /* Start reception and declare the driver ready */ + if(!lp->configured) + return FALSE; + if(!wv_ru_start(dev)) + wv_hw_reset(dev); /* If problem : reset */ + netif_start_queue(dev); + + /* Mark the device as used */ + link->open++; + +#ifdef WAVELAN_ROAMING + if(do_roaming) + wv_roam_init(dev); +#endif /* WAVELAN_ROAMING */ + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Shutdown the WaveLAN PCMCIA adaptor. + * Called by NET3 when it "close" the device. + */ +static int +wavelan_close(struct net_device * dev) +{ + dev_link_t * link = ((net_local *)netdev_priv(dev))->link; + kio_addr_t base = dev->base_addr; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name, + (unsigned int) dev); +#endif + + /* If the device isn't open, then nothing to do */ + if(!link->open) + { +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name); +#endif + return 0; + } + +#ifdef WAVELAN_ROAMING + /* Cleanup of roaming stuff... */ + if(do_roaming) + wv_roam_cleanup(dev); +#endif /* WAVELAN_ROAMING */ + + link->open--; + + /* If the card is still present */ + if(netif_running(dev)) + { + netif_stop_queue(dev); + + /* Stop receiving new messages and wait end of transmission */ + wv_ru_stop(dev); + + /* Power down the module */ + hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT)); + } + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name); +#endif + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * wavelan_attach() creates an "instance" of the driver, allocating + * local data structures for one device (one interface). The device + * is registered with Card Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a + * card insertion event. + */ +static dev_link_t * +wavelan_attach(void) +{ + client_reg_t client_reg; /* Register with cardmgr */ + dev_link_t * link; /* Info for cardmgr */ + struct net_device * dev; /* Interface generic data */ + net_local * lp; /* Interface specific data */ + int ret; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "-> wavelan_attach()\n"); +#endif + + /* Initialize the dev_link_t structure */ + link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL); + if (!link) return NULL; + memset(link, 0, sizeof(struct dev_link_t)); + + /* The io structure describes IO port mapping */ + link->io.NumPorts1 = 8; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = 3; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = wavelan_interrupt; + + /* General socket configuration */ + link->conf.Attributes = CONF_ENABLE_IRQ; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Chain drivers */ + link->next = dev_list; + dev_list = link; + + /* Allocate the generic data structure */ + dev = alloc_etherdev(sizeof(net_local)); + if (!dev) { + kfree(link); + return NULL; + } + link->priv = link->irq.Instance = dev; + + lp = netdev_priv(dev); + + /* Init specific data */ + lp->configured = 0; + lp->reconfig_82593 = FALSE; + lp->nresets = 0; + /* Multicast stuff */ + lp->promiscuous = 0; + lp->allmulticast = 0; + lp->mc_count = 0; + + /* Init spinlock */ + spin_lock_init(&lp->spinlock); + + /* back links */ + lp->link = link; + lp->dev = dev; + + /* wavelan NET3 callbacks */ + SET_MODULE_OWNER(dev); + dev->open = &wavelan_open; + dev->stop = &wavelan_close; + dev->hard_start_xmit = &wavelan_packet_xmit; + dev->get_stats = &wavelan_get_stats; + dev->set_multicast_list = &wavelan_set_multicast_list; +#ifdef SET_MAC_ADDRESS + dev->set_mac_address = &wavelan_set_mac_address; +#endif /* SET_MAC_ADDRESS */ + + /* Set the watchdog timer */ + dev->tx_timeout = &wavelan_watchdog; + dev->watchdog_timeo = WATCHDOG_JIFFIES; + SET_ETHTOOL_OPS(dev, &ops); + +#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ + dev->wireless_handlers = &wavelan_handler_def; + lp->wireless_data.spy_data = &lp->spy_data; + dev->wireless_data = &lp->wireless_data; +#endif + + /* Other specific data */ + dev->mtu = WAVELAN_MTU; + + /* Register with Card Services */ + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_REGISTRATION_COMPLETE | + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &wavelan_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG "wavelan_attach(): almost done, calling pcmcia_register_client\n"); +#endif + + ret = pcmcia_register_client(&link->handle, &client_reg); + if(ret != 0) + { + cs_error(link->handle, RegisterClient, ret); + wavelan_detach(link); + return NULL; + } + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "<- wavelan_attach()\n"); +#endif + + return link; +} + +/*------------------------------------------------------------------*/ +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void +wavelan_detach(dev_link_t * link) +{ +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link); +#endif + + /* + * If the device is currently configured and active, we won't + * actually delete it yet. Instead, it is marked so that when the + * release() function is called, that will trigger a proper + * detach(). + */ + if(link->state & DEV_CONFIG) + { + /* Some others haven't done their job : give them another chance */ + wv_pcmcia_release(link); + } + + /* Break the link with Card Services */ + if(link->handle) + pcmcia_deregister_client(link->handle); + + /* Remove the interface data from the linked list */ + if(dev_list == link) + dev_list = link->next; + else + { + dev_link_t * prev = dev_list; + + while((prev != (dev_link_t *) NULL) && (prev->next != link)) + prev = prev->next; + + if(prev == (dev_link_t *) NULL) + { +#ifdef DEBUG_CONFIG_ERRORS + printk(KERN_WARNING "wavelan_detach : Attempting to remove a nonexistent device.\n"); +#endif + return; + } + + prev->next = link->next; + } + + /* Free pieces */ + if(link->priv) + { + struct net_device * dev = (struct net_device *) link->priv; + + /* Remove ourselves from the kernel list of ethernet devices */ + /* Warning : can't be called from interrupt, timer or wavelan_close() */ + if (link->dev) + unregister_netdev(dev); + link->dev = NULL; + ((net_local *)netdev_priv(dev))->link = NULL; + ((net_local *)netdev_priv(dev))->dev = NULL; + free_netdev(dev); + } + kfree(link); + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "<- wavelan_detach()\n"); +#endif +} + +/*------------------------------------------------------------------*/ +/* + * The card status event handler. Mostly, this schedules other stuff + * to run after an event is received. A CARD_REMOVAL event also sets + * some flags to discourage the net drivers from trying to talk to the + * card any more. + */ +static int +wavelan_event(event_t event, /* The event received */ + int priority, + event_callback_args_t * args) +{ + dev_link_t * link = (dev_link_t *) args->client_data; + struct net_device * dev = (struct net_device *) link->priv; + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "->wavelan_event(): %s\n", + ((event == CS_EVENT_REGISTRATION_COMPLETE)?"registration complete" : + ((event == CS_EVENT_CARD_REMOVAL) ? "card removal" : + ((event == CS_EVENT_CARD_INSERTION) ? "card insertion" : + ((event == CS_EVENT_PM_SUSPEND) ? "pm suspend" : + ((event == CS_EVENT_RESET_PHYSICAL) ? "physical reset" : + ((event == CS_EVENT_PM_RESUME) ? "pm resume" : + ((event == CS_EVENT_CARD_RESET) ? "card reset" : + "unknown")))))))); +#endif + + switch(event) + { + case CS_EVENT_REGISTRATION_COMPLETE: +#ifdef DEBUG_CONFIG_INFO + printk(KERN_DEBUG "wavelan_cs: registration complete\n"); +#endif + break; + + case CS_EVENT_CARD_REMOVAL: + /* Oups ! The card is no more there */ + link->state &= ~DEV_PRESENT; + if(link->state & DEV_CONFIG) + { + /* Accept no more transmissions */ + netif_device_detach(dev); + + /* Release the card */ + wv_pcmcia_release(link); + } + break; + + case CS_EVENT_CARD_INSERTION: + /* Reset and configure the card */ + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + if(wv_pcmcia_config(link) && + wv_hw_config(dev)) + wv_init_info(dev); + else + dev->irq = 0; + break; + + case CS_EVENT_PM_SUSPEND: + /* NB: wavelan_close will be called, but too late, so we are + * obliged to close nicely the wavelan here. David, could you + * close the device before suspending them ? And, by the way, + * could you, on resume, add a "route add -net ..." after the + * ifconfig up ? Thanks... */ + + /* Stop receiving new messages and wait end of transmission */ + wv_ru_stop(dev); + + /* Power down the module */ + hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT)); + + /* The card is now suspended */ + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if(link->state & DEV_CONFIG) + { + if(link->open) + netif_device_detach(dev); + pcmcia_release_configuration(link->handle); + } + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if(link->state & DEV_CONFIG) + { + pcmcia_request_configuration(link->handle, &link->conf); + if(link->open) /* If RESET -> True, If RESUME -> False ? */ + { + wv_hw_reset(dev); + netif_device_attach(dev); + } + } + break; + } + +#ifdef DEBUG_CALLBACK_TRACE + printk(KERN_DEBUG "<-wavelan_event()\n"); +#endif + return 0; +} + +static struct pcmcia_driver wavelan_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "wavelan_cs", + }, + .attach = wavelan_attach, + .detach = wavelan_detach, +}; + +static int __init +init_wavelan_cs(void) +{ + return pcmcia_register_driver(&wavelan_driver); +} + +static void __exit +exit_wavelan_cs(void) +{ + pcmcia_unregister_driver(&wavelan_driver); +} + +module_init(init_wavelan_cs); +module_exit(exit_wavelan_cs); diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h new file mode 100644 index 00000000000..29cff6daf86 --- /dev/null +++ b/drivers/net/wireless/wavelan_cs.h @@ -0,0 +1,386 @@ +/* + * Wavelan Pcmcia driver + * + * Jean II - HPLB '96 + * + * Reorganization and extension of the driver. + * Original copyright follow. See wavelan_cs.h for details. + * + * This file contain the declarations of the Wavelan hardware. Note that + * the Pcmcia Wavelan include a i82593 controller (see definitions in + * file i82593.h). + * + * The main difference between the pcmcia hardware and the ISA one is + * the Ethernet Controller (i82593 instead of i82586). The i82593 allow + * only one send buffer. The PSA (Parameter Storage Area : EEprom for + * permanent storage of various info) is memory mapped, but not the + * MMI (Modem Management Interface). + */ + +/* + * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card: + * An Ethernet-like radio transceiver controlled by an Intel 82593 + * coprocessor. + * + * + **************************************************************************** + * Copyright 1995 + * Anthony D. Joseph + * Massachusetts Institute of Technology + * + * Permission to use, copy, modify, and distribute this program + * for any purpose and without fee is hereby granted, provided + * that this copyright and permission notice appear on all copies + * and supporting documentation, the name of M.I.T. not be used + * in advertising or publicity pertaining to distribution of the + * program without specific prior permission, and notice be given + * in supporting documentation that copying and distribution is + * by permission of M.I.T. M.I.T. makes no representations about + * the suitability of this software for any purpose. It is pro- + * vided "as is" without express or implied warranty. + **************************************************************************** + * + * + * Credits: + * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for + * providing extremely useful information about WaveLAN PCMCIA hardware + * + * This driver is based upon several other drivers, in particular: + * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter + * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter + * Anders Klemets' PCMCIA WaveLAN adapter driver + * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter + */ + +#ifndef _WAVELAN_CS_H +#define _WAVELAN_CS_H + +/************************** MAGIC NUMBERS ***************************/ + +/* The detection of the wavelan card is made by reading the MAC address + * from the card and checking it. If you have a non AT&T product (OEM, + * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this + * part to accommodate your hardware... + */ +const unsigned char MAC_ADDRESSES[][3] = +{ + { 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */ + { 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */ + { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */ + { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */ + /* Add your card here and send me the patch ! */ +}; + +/* + * Constants used to convert channels to frequencies + */ + +/* Frequency available in the 2.0 modem, in units of 250 kHz + * (as read in the offset register of the dac area). + * Used to map channel numbers used by `wfreqsel' to frequencies + */ +const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, + 0xD0, 0xF0, 0xF8, 0x150 }; + +/* Frequencies of the 1.0 modem (fixed frequencies). + * Use to map the PSA `subband' to a frequency + * Note : all frequencies apart from the first one need to be multiplied by 10 + */ +const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; + + +/*************************** PC INTERFACE ****************************/ + +/* WaveLAN host interface definitions */ + +#define LCCR(base) (base) /* LAN Controller Command Register */ +#define LCSR(base) (base) /* LAN Controller Status Register */ +#define HACR(base) (base+0x1) /* Host Adapter Command Register */ +#define HASR(base) (base+0x1) /* Host Adapter Status Register */ +#define PIORL(base) (base+0x2) /* Program I/O Register Low */ +#define RPLL(base) (base+0x2) /* Receive Pointer Latched Low */ +#define PIORH(base) (base+0x3) /* Program I/O Register High */ +#define RPLH(base) (base+0x3) /* Receive Pointer Latched High */ +#define PIOP(base) (base+0x4) /* Program I/O Port */ +#define MMR(base) (base+0x6) /* MMI Address Register */ +#define MMD(base) (base+0x7) /* MMI Data Register */ + +/* Host Adaptor Command Register bit definitions */ + +#define HACR_LOF (1 << 3) /* Lock Out Flag, toggle every 250ms */ +#define HACR_PWR_STAT (1 << 4) /* Power State, 1=active, 0=sleep */ +#define HACR_TX_DMA_RESET (1 << 5) /* Reset transmit DMA ptr on high */ +#define HACR_RX_DMA_RESET (1 << 6) /* Reset receive DMA ptr on high */ +#define HACR_ROM_WEN (1 << 7) /* EEPROM write enabled when true */ + +#define HACR_RESET (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET) +#define HACR_DEFAULT (HACR_PWR_STAT) + +/* Host Adapter Status Register bit definitions */ + +#define HASR_MMI_BUSY (1 << 2) /* MMI is busy when true */ +#define HASR_LOF (1 << 3) /* Lock out flag status */ +#define HASR_NO_CLK (1 << 4) /* active when modem not connected */ + +/* Miscellaneous bit definitions */ + +#define PIORH_SEL_TX (1 << 5) /* PIOR points to 0=rx/1=tx buffer */ +#define MMR_MMI_WR (1 << 0) /* Next MMI cycle is 0=read, 1=write */ +#define PIORH_MASK 0x1f /* only low 5 bits are significant */ +#define RPLH_MASK 0x1f /* only low 5 bits are significant */ +#define MMI_ADDR_MASK 0x7e /* Bits 1-6 of MMR are significant */ + +/* Attribute Memory map */ + +#define CIS_ADDR 0x0000 /* Card Information Status Register */ +#define PSA_ADDR 0x0e00 /* Parameter Storage Area address */ +#define EEPROM_ADDR 0x1000 /* EEPROM address (unused ?) */ +#define COR_ADDR 0x4000 /* Configuration Option Register */ + +/* Configuration Option Register bit definitions */ + +#define COR_CONFIG (1 << 0) /* Config Index, 0 when unconfigured */ +#define COR_SW_RESET (1 << 7) /* Software Reset on true */ +#define COR_LEVEL_IRQ (1 << 6) /* Level IRQ */ + +/* Local Memory map */ + +#define RX_BASE 0x0000 /* Receive memory, 8 kB */ +#define TX_BASE 0x2000 /* Transmit memory, 2 kB */ +#define UNUSED_BASE 0x2800 /* Unused, 22 kB */ +#define RX_SIZE (TX_BASE-RX_BASE) /* Size of receive area */ +#define RX_SIZE_SHIFT 6 /* Bits to shift in stop register */ + +#define TRUE 1 +#define FALSE 0 + +#define MOD_ENAL 1 +#define MOD_PROM 2 + +/* Size of a MAC address */ +#define WAVELAN_ADDR_SIZE 6 + +/* Maximum size of Wavelan packet */ +#define WAVELAN_MTU 1500 + +#define MAXDATAZ (6 + 6 + 2 + WAVELAN_MTU) + +/********************** PARAMETER STORAGE AREA **********************/ + +/* + * Parameter Storage Area (PSA). + */ +typedef struct psa_t psa_t; +struct psa_t +{ + /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */ + unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */ + unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */ + unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */ + unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */ + unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */ + unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */ + unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */ + unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */ + unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */ + unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */ + + unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */ + unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */ + unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */ +#define PSA_UNIVERSAL 0 /* Universal (factory) */ +#define PSA_LOCAL 1 /* Local */ + unsigned char psa_comp_number; /* [0x1D] Compatability Number: */ +#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */ +#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */ +#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */ +#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */ +#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */ + unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */ + unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */ +#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */ + unsigned char psa_subband; /* [0x20] Subband */ +#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */ +#define PSA_SUBBAND_2425 1 /* 2425 MHz */ +#define PSA_SUBBAND_2460 2 /* 2460 MHz */ +#define PSA_SUBBAND_2484 3 /* 2484 MHz */ +#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */ + unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */ + unsigned char psa_mod_delay; /* [0x22] Modem Delay ??? (reserved) */ + unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */ + unsigned char psa_nwid_select; /* [0x25] Network ID Select On Off */ + unsigned char psa_encryption_select; /* [0x26] Encryption On Off */ + unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */ + unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */ + unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */ + unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */ + unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */ + unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/ + unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */ + unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */ +}; + +/* Size for structure checking (if padding is correct) */ +#define PSA_SIZE 64 + +/* Calculate offset of a field in the above structure + * Warning : only even addresses are used */ +#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL)) + +/******************** MODEM MANAGEMENT INTERFACE ********************/ + +/* + * Modem Management Controller (MMC) write structure. + */ +typedef struct mmw_t mmw_t; +struct mmw_t +{ + unsigned char mmw_encr_key[8]; /* encryption key */ + unsigned char mmw_encr_enable; /* enable/disable encryption */ +#define MMW_ENCR_ENABLE_MODE 0x02 /* Mode of security option */ +#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option */ + unsigned char mmw_unused0[1]; /* unused */ + unsigned char mmw_des_io_invert; /* Encryption option */ +#define MMW_DES_IO_INVERT_RES 0x0F /* Reserved */ +#define MMW_DES_IO_INVERT_CTRL 0xF0 /* Control ??? (set to 0) */ + unsigned char mmw_unused1[5]; /* unused */ + unsigned char mmw_loopt_sel; /* looptest selection */ +#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* disable NWID filtering */ +#define MMW_LOOPT_SEL_INT 0x20 /* activate Attention Request */ +#define MMW_LOOPT_SEL_LS 0x10 /* looptest w/o collision avoidance */ +#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */ +#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */ +#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */ +#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */ + unsigned char mmw_jabber_enable; /* jabber timer enable */ + /* Abort transmissions > 200 ms */ + unsigned char mmw_freeze; /* freeze / unfreeeze signal level */ + /* 0 : signal level & qual updated for every new message, 1 : frozen */ + unsigned char mmw_anten_sel; /* antenna selection */ +#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */ +#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */ + unsigned char mmw_ifs; /* inter frame spacing */ + /* min time between transmission in bit periods (.5 us) - bit 0 ignored */ + unsigned char mmw_mod_delay; /* modem delay (synchro) */ + unsigned char mmw_jam_time; /* jamming time (after collision) */ + unsigned char mmw_unused2[1]; /* unused */ + unsigned char mmw_thr_pre_set; /* level threshold preset */ + /* Discard all packet with signal < this value (4) */ + unsigned char mmw_decay_prm; /* decay parameters */ + unsigned char mmw_decay_updat_prm; /* decay update parameterz */ + unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */ + /* Discard all packet with quality < this value (3) */ + unsigned char mmw_netw_id_l; /* NWID low order byte */ + unsigned char mmw_netw_id_h; /* NWID high order byte */ + /* Network ID or Domain : create virtual net on the air */ + + /* 2.0 Hardware extension - frequency selection support */ + unsigned char mmw_mode_select; /* for analog tests (set to 0) */ + unsigned char mmw_unused3[1]; /* unused */ + unsigned char mmw_fee_ctrl; /* frequency eeprom control */ +#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions */ +#define MMW_FEE_CTRL_DWLD 0x08 /* Download eeprom to mmc */ +#define MMW_FEE_CTRL_CMD 0x07 /* EEprom commands : */ +#define MMW_FEE_CTRL_READ 0x06 /* Read */ +#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */ +#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address */ +#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses */ +#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */ +#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */ +#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */ +#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers */ +#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write addr in protect register */ +#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */ + /* Never issue this command (PRDS) : it's irreversible !!! */ + + unsigned char mmw_fee_addr; /* EEprom address */ +#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel */ +#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */ +#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */ +#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */ +#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */ +#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */ + + unsigned char mmw_fee_data_l; /* Write data to EEprom */ + unsigned char mmw_fee_data_h; /* high octet */ + unsigned char mmw_ext_ant; /* Setting for external antenna */ +#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */ +#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */ +#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */ +#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */ +#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */ +}; + +/* Size for structure checking (if padding is correct) */ +#define MMW_SIZE 37 + +/* Calculate offset of a field in the above structure */ +#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0) + + +/* + * Modem Management Controller (MMC) read structure. + */ +typedef struct mmr_t mmr_t; +struct mmr_t +{ + unsigned char mmr_unused0[8]; /* unused */ + unsigned char mmr_des_status; /* encryption status */ + unsigned char mmr_des_avail; /* encryption available (0x55 read) */ +#define MMR_DES_AVAIL_DES 0x55 /* DES available */ +#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */ + unsigned char mmr_des_io_invert; /* des I/O invert register */ + unsigned char mmr_unused1[5]; /* unused */ + unsigned char mmr_dce_status; /* DCE status */ +#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */ +#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */ +#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */ +#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */ +#define MMR_DCE_STATUS 0x0F /* mask to get the bits */ + unsigned char mmr_dsp_id; /* DSP id (AA = Daedalus rev A) */ + unsigned char mmr_unused2[2]; /* unused */ + unsigned char mmr_correct_nwid_l; /* # of correct NWID's rxd (low) */ + unsigned char mmr_correct_nwid_h; /* # of correct NWID's rxd (high) */ + /* Warning : Read high order octet first !!! */ + unsigned char mmr_wrong_nwid_l; /* # of wrong NWID's rxd (low) */ + unsigned char mmr_wrong_nwid_h; /* # of wrong NWID's rxd (high) */ + unsigned char mmr_thr_pre_set; /* level threshold preset */ +#define MMR_THR_PRE_SET 0x3F /* level threshold preset */ +#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */ + unsigned char mmr_signal_lvl; /* signal level */ +#define MMR_SIGNAL_LVL 0x3F /* signal level */ +#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */ + unsigned char mmr_silence_lvl; /* silence level (noise) */ +#define MMR_SILENCE_LVL 0x3F /* silence level */ +#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */ + unsigned char mmr_sgnl_qual; /* signal quality */ +#define MMR_SGNL_QUAL 0x0F /* signal quality */ +#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */ + unsigned char mmr_netw_id_l; /* NWID low order byte ??? */ + unsigned char mmr_unused3[3]; /* unused */ + + /* 2.0 Hardware extension - frequency selection support */ + unsigned char mmr_fee_status; /* Status of frequency eeprom */ +#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision id */ +#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */ +#define MMR_FEE_STATUS_BUSY 0x04 /* EEprom busy */ + unsigned char mmr_unused4[1]; /* unused */ + unsigned char mmr_fee_data_l; /* Read data from eeprom (low) */ + unsigned char mmr_fee_data_h; /* Read data from eeprom (high) */ +}; + +/* Size for structure checking (if padding is correct) */ +#define MMR_SIZE 36 + +/* Calculate offset of a field in the above structure */ +#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0) + + +/* Make the two above structures one */ +typedef union mm_t +{ + struct mmw_t w; /* Write to the mmc */ + struct mmr_t r; /* Read from the mmc */ +} mm_t; + +#endif /* _WAVELAN_CS_H */ diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h new file mode 100644 index 00000000000..ea2ef8dddb9 --- /dev/null +++ b/drivers/net/wireless/wavelan_cs.p.h @@ -0,0 +1,813 @@ +/* + * Wavelan Pcmcia driver + * + * Jean II - HPLB '96 + * + * Reorganisation and extension of the driver. + * + * This file contain all definition and declarations necessary for the + * wavelan pcmcia driver. This file is a private header, so it should + * be included only on wavelan_cs.c !!! + */ + +#ifndef WAVELAN_CS_P_H +#define WAVELAN_CS_P_H + +/************************** DOCUMENTATION **************************/ +/* + * This driver provide a Linux interface to the Wavelan Pcmcia hardware + * The Wavelan is a product of Lucent (http://www.wavelan.com/). + * This division was formerly part of NCR and then AT&T. + * Wavelan are also distributed by DEC (RoamAbout DS)... + * + * To know how to use this driver, read the PCMCIA HOWTO. + * If you want to exploit the many other fonctionalities, look comments + * in the code... + * + * This driver is the result of the effort of many peoples (see below). + */ + +/* ------------------------ SPECIFIC NOTES ------------------------ */ +/* + * Web page + * -------- + * I try to maintain a web page with the Wireless LAN Howto at : + * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html + * + * SMP + * --- + * We now are SMP compliant (I eventually fixed the remaining bugs). + * The driver has been tested on a dual P6-150 and survived my usual + * set of torture tests. + * Anyway, I spent enough time chasing interrupt re-entrancy during + * errors or reconfigure, and I designed the locked/unlocked sections + * of the driver with great care, and with the recent addition of + * the spinlock (thanks to the new API), we should be quite close to + * the truth. + * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), + * but better safe than sorry (especially at 2 Mb/s ;-). + * + * I have also looked into disabling only our interrupt on the card + * (via HACR) instead of all interrupts in the processor (via cli), + * so that other driver are not impacted, and it look like it's + * possible, but it's very tricky to do right (full of races). As + * the gain would be mostly for SMP systems, it can wait... + * + * Debugging and options + * --------------------- + * You will find below a set of '#define" allowing a very fine control + * on the driver behaviour and the debug messages printed. + * The main options are : + * o WAVELAN_ROAMING, for the experimental roaming support. + * o SET_PSA_CRC, to have your card correctly recognised by + * an access point and the Point-to-Point diagnostic tool. + * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) + * (otherwise we always start afresh with some defaults) + * + * wavelan_cs.o is darn too big + * ------------------------- + * That's true ! There is a very simple way to reduce the driver + * object by 33% (yes !). Comment out the following line : + * #include <linux/wireless.h> + * Other compile options can also reduce the size of it... + * + * MAC address and hardware detection : + * ---------------------------------- + * The detection code of the wavelan chech that the first 3 + * octets of the MAC address fit the company code. This type of + * detection work well for AT&T cards (because the AT&T code is + * hardcoded in wavelan_cs.h), but of course will fail for other + * manufacturer. + * + * If you are sure that your card is derived from the wavelan, + * here is the way to configure it : + * 1) Get your MAC address + * a) With your card utilities (wfreqsel, instconf, ...) + * b) With the driver : + * o compile the kernel with DEBUG_CONFIG_INFO enabled + * o Boot and look the card messages + * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h) + * 3) Compile & verify + * 4) Send me the MAC code - I will include it in the next version... + * + */ + +/* --------------------- WIRELESS EXTENSIONS --------------------- */ +/* + * This driver is the first one to support "wireless extensions". + * This set of extensions provide you some way to control the wireless + * caracteristics of the hardware in a standard way and support for + * applications for taking advantage of it (like Mobile IP). + * + * You will need to enable the CONFIG_NET_RADIO define in the kernel + * configuration to enable the wireless extensions (this is the one + * giving access to the radio network device choice). + * + * It might also be a good idea as well to fetch the wireless tools to + * configure the device and play a bit. + */ + +/* ---------------------------- FILES ---------------------------- */ +/* + * wavelan_cs.c : The actual code for the driver - C functions + * + * wavelan_cs.p.h : Private header : local types / vars for the driver + * + * wavelan_cs.h : Description of the hardware interface & structs + * + * i82593.h : Description if the Ethernet controller + */ + +/* --------------------------- HISTORY --------------------------- */ +/* + * The history of the Wavelan drivers is as complicated as history of + * the Wavelan itself (NCR -> AT&T -> Lucent). + * + * All started with Anders Klemets <klemets@paul.rutgers.edu>, + * writting a Wavelan ISA driver for the MACH microkernel. Girish + * Welling <welling@paul.rutgers.edu> had also worked on it. + * Keith Moore modify this for the Pcmcia hardware. + * + * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI + * and add specific Pcmcia support (there is currently no equivalent + * of the PCMCIA package under BSD...). + * + * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD. + * + * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux. + * + * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver + * (with help of the BSDI PCMCIA driver) for PCMCIA. + * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work. + * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start + * correctly 2.00 cards (2.4 GHz with frequency selection). + * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his + * Pcmcia package (+ bug corrections). + * + * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some + * patchs to the Pcmcia driver. After, I added code in the ISA driver + * for Wireless Extensions and full support of frequency selection + * cards. Now, I'm doing the same to the Pcmcia driver + some + * reorganisation. + * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me + * much needed informations on the Wavelan hardware. + */ + +/* By the way : for the copyright & legal stuff : + * Almost everybody wrote code under GNU or BSD license (or alike), + * and want that their original copyright remain somewhere in the + * code (for myself, I go with the GPL). + * Nobody want to take responsibility for anything, except the fame... + */ + +/* --------------------------- CREDITS --------------------------- */ +/* + * Credits: + * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and + * Loeke Brederveld of Lucent for providing extremely useful + * information about WaveLAN PCMCIA hardware + * + * This driver is based upon several other drivers, in particular: + * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter + * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter + * Anders Klemets' PCMCIA WaveLAN adapter driver + * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter + * + * Additional Credits: + * + * This software was originally developed under Linux 1.2.3 + * (Slackware 2.0 distribution). + * And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+) + * with an HP OmniBook 4000 and then a 5500. + * + * It is based on other device drivers and information either written + * or supplied by: + * James Ashton (jaa101@syseng.anu.edu.au), + * Ajay Bakre (bakre@paul.rutgers.edu), + * Donald Becker (becker@super.org), + * Jim Binkley <jrb@cs.pdx.edu>, + * Loeke Brederveld <lbrederv@wavelan.com>, + * Allan Creighton (allanc@cs.su.oz.au), + * Brent Elphick <belphick@uwaterloo.ca>, + * Joe Finney <joe@comp.lancs.ac.uk>, + * Matthew Geier (matthew@cs.su.oz.au), + * Remo di Giovanni (remo@cs.su.oz.au), + * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), + * David Hinds <dahinds@users.sourceforge.net>, + * Jan Hoogendoorn (c/o marteijn@lucent.com), + * Bruce Janson <bruce@cs.usyd.edu.au>, + * Anthony D. Joseph <adj@lcs.mit.edu>, + * Anders Klemets (klemets@paul.rutgers.edu), + * Yunzhou Li <yunzhou@strat.iol.unh.edu>, + * Marc Meertens (mmeertens@lucent.com), + * Keith Moore, + * Robert Morris (rtm@das.harvard.edu), + * Ian Parkin (ian@cs.su.oz.au), + * John Rosenberg (johnr@cs.su.oz.au), + * George Rossi (george@phm.gov.au), + * Arthur Scott (arthur@cs.su.oz.au), + * Stanislav Sinyagin <stas@isf.ru> + * Peter Storey, + * Jean Tourrilhes <jt@hpl.hp.com>, + * Girish Welling (welling@paul.rutgers.edu) + * Clark Woodworth <clark@hiway1.exit109.com> + * Yongguang Zhang <ygz@isl.hrl.hac.com>... + */ + +/* ------------------------- IMPROVEMENTS ------------------------- */ +/* + * I proudly present : + * + * Changes made in 2.8.22 : + * ---------------------- + * - improved wv_set_multicast_list + * - catch spurious interrupt + * - correct release of the device + * + * Changes mades in release : + * ------------------------ + * - Reorganisation of the code, function name change + * - Creation of private header (wavelan_cs.h) + * - Reorganised debug messages + * - More comments, history, ... + * - Configure earlier (in "insert" instead of "open") + * and do things only once + * - mmc_init : configure the PSA if not done + * - mmc_init : 2.00 detection better code for 2.00 init + * - better info at startup + * - Correct a HUGE bug (volatile & uncalibrated busy loop) + * in wv_82593_cmd => config speedup + * - Stop receiving & power down on close (and power up on open) + * use "ifconfig down" & "ifconfig up ; route add -net ..." + * - Send packets : add watchdog instead of pooling + * - Receive : check frame wrap around & try to recover some frames + * - wavelan_set_multicast_list : avoid reset + * - add wireless extensions (ioctl & get_wireless_stats) + * get/set nwid/frequency on fly, info for /proc/net/wireless + * - Suppress useless stuff from lp (net_local), but add link + * - More inlines + * - Lot of others minor details & cleanups + * + * Changes made in second release : + * ------------------------------ + * - Optimise wv_85893_reconfig stuff, fix potential problems + * - Change error values for ioctl + * - Non blocking wv_ru_stop() + call wv_reset() in case of problems + * - Remove development printk from wavelan_watchdog() + * - Remove of the watchdog to wavelan_close instead of wavelan_release + * fix potential problems... + * - Start debugging suspend stuff (but it's still a bit weird) + * - Debug & optimize dump header/packet in Rx & Tx (debug) + * - Use "readb" and "writeb" to be kernel 2.1 compliant + * - Better handling of bogus interrupts + * - Wireless extension : SETSPY and GETSPY + * - Remove old stuff (stats - for those needing it, just ask me...) + * - Make wireless extensions optional + * + * Changes made in third release : + * ----------------------------- + * - cleanups & typos + * - modif wireless ext (spy -> only one pointer) + * - new private ioctl to set/get quality & level threshold + * - Init : correct default value of level threshold for pcmcia + * - kill watchdog in hw_reset + * - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) + * - Add message level (debug stuff in /var/adm/debug & errors not + * displayed at console and still in /var/adm/messages) + * + * Changes made in fourth release : + * ------------------------------ + * - multicast support (yes !) thanks to Yongguang Zhang. + * + * Changes made in fifth release (2.9.0) : + * ------------------------------------- + * - Revisited multicast code (it was mostly wrong). + * - protect code in wv_82593_reconfig with dev->tbusy (oups !) + * + * Changes made in sixth release (2.9.1a) : + * -------------------------------------- + * - Change the detection code for multi manufacturer code support + * - Correct bug (hang kernel) in init when we were "rejecting" a card + * + * Changes made in seventh release (2.9.1b) : + * ---------------------------------------- + * - Update to wireless extensions changes + * - Silly bug in card initial configuration (psa_conf_status) + * + * Changes made in eigth release : + * ----------------------------- + * - Small bug in debug code (probably not the last one...) + * - 1.2.13 support (thanks to Clark Woodworth) + * + * Changes made for release in 2.9.2b : + * ---------------------------------- + * - Level threshold is now a standard wireless extension (version 4 !) + * - modules parameters types for kernel > 2.1.17 + * - updated man page + * - Others cleanup from David Hinds + * + * Changes made for release in 2.9.5 : + * --------------------------------- + * - byte count stats (courtesy of David Hinds) + * - Remove dev_tint stuff (courtesy of David Hinds) + * - Others cleanup from David Hinds + * - Encryption setting from Brent Elphick (thanks a lot !) + * - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) + * + * Changes made for release in 2.9.6 : + * --------------------------------- + * - fix bug : no longuer disable watchdog in case of bogus interrupt + * - increase timeout in config code for picky hardware + * - mask unused bits in status (Wireless Extensions) + * + * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds : + * ----------------------------------------------------------------- + * - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk> + * - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu> + * - Better initialisation of the i82593 controller + * from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu> + * + * Changes made for release in 3.0.10 : + * ---------------------------------- + * - Fix eject "hang" of the driver under 2.2.X : + * o create wv_flush_stale_links() + * o Rename wavelan_release to wv_pcmcia_release & move up + * o move unregister_netdev to wavelan_detach() + * o wavelan_release() no longer call wavelan_detach() + * o Suppress "release" timer + * o Other cleanups & fixes + * - New MAC address in the probe + * - Reorg PSA_CRC code (endian neutral & cleaner) + * - Correct initialisation of the i82593 from Lucent manual + * - Put back the watchdog, with larger timeout + * - TRANSMIT_NO_CRC is a "normal" error, so recover from it + * from Derrick J Brashear <shadow@dementia.org> + * - Better handling of TX and RX normal failure conditions + * - #ifdef out all the roaming code + * - Add ESSID & "AP current address" ioctl stubs + * - General cleanup of the code + * + * Changes made for release in 3.0.13 : + * ---------------------------------- + * - Re-enable compilation of roaming code by default, but with + * do_roaming = 0 + * - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather + * at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu> + * - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff. + * + * Changes made for release in 3.0.15 : + * ---------------------------------- + * - Change e-mail and web page addresses + * - Watchdog timer is now correctly expressed in HZ, not in jiffies + * - Add channel number to the list of frequencies in range + * - Add the (short) list of bit-rates in range + * - Developp a new sensitivity... (sens.value & sens.fixed) + * + * Changes made for release in 3.1.2 : + * --------------------------------- + * - Fix check for root permission (break instead of exit) + * - New nwid & encoding setting (Wireless Extension 9) + * + * Changes made for release in 3.1.12 : + * ---------------------------------- + * - reworked wv_82593_cmd to avoid using the IRQ handler and doing + * ugly things with interrupts. + * - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog + * - Update to new network API (softnet - 2.3.43) : + * o replace dev->tbusy (David + me) + * o replace dev->tstart (David + me) + * o remove dev->interrupt (David) + * o add SMP locking via spinlock in splxx (me) + * o add spinlock in interrupt handler (me) + * o use kernel watchdog instead of ours (me) + * o verify that all the changes make sense and work (me) + * - Re-sync kernel/pcmcia versions (not much actually) + * - A few other cleanups (David & me)... + * + * Changes made for release in 3.1.22 : + * ---------------------------------- + * - Check that SMP works, remove annoying log message + * + * Changes made for release in 3.1.24 : + * ---------------------------------- + * - Fix unfrequent card lockup when watchdog was reseting the hardware : + * o control first busy loop in wv_82593_cmd() + * o Extend spinlock protection in wv_hw_config() + * + * Changes made for release in 3.1.33 : + * ---------------------------------- + * - Optional use new driver API for Wireless Extensions : + * o got rid of wavelan_ioctl() + * o use a bunch of iw_handler instead + * + * Changes made for release in 3.2.1 : + * --------------------------------- + * - Set dev->trans_start to avoid filling the logs + * (and generating useless abort commands) + * - Avoid deadlocks in mmc_out()/mmc_in() + * + * Wishes & dreams: + * ---------------- + * - Cleanup and integrate the roaming code + * (std debug, set DomainID, decay avg and co...) + */ + +/***************************** INCLUDES *****************************/ + +/* Linux headers that we need */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/fcntl.h> +#include <linux/ethtool.h> + +#ifdef CONFIG_NET_RADIO +#include <linux/wireless.h> /* Wireless extensions */ +#include <net/iw_handler.h> /* New driver API */ +#endif + +/* Pcmcia headers that we need */ +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> +#include <pcmcia/version.h> + +/* Wavelan declarations */ +#include "i82593.h" /* Definitions for the Intel chip */ + +#include "wavelan_cs.h" /* Others bits of the hardware */ + +/************************** DRIVER OPTIONS **************************/ +/* + * `#define' or `#undef' the following constant to change the behaviour + * of the driver... + */ +#define WAVELAN_ROAMING /* Include experimental roaming code */ +#undef WAVELAN_ROAMING_EXT /* Enable roaming wireless extensions */ +#undef SET_PSA_CRC /* Set the CRC in PSA (slower) */ +#define USE_PSA_CONFIG /* Use info from the PSA */ +#undef STRUCT_CHECK /* Verify padding of structures */ +#undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */ +#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ +#undef SET_MAC_ADDRESS /* Experimental */ + +#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ +/* Warning : these stuff will slow down the driver... */ +#define WIRELESS_SPY /* Enable spying addresses */ +#undef HISTOGRAM /* Enable histogram of sig level... */ +#endif + +/****************************** DEBUG ******************************/ + +#undef DEBUG_MODULE_TRACE /* Module insertion/removal */ +#undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */ +#undef DEBUG_INTERRUPT_TRACE /* Calls to handler */ +#undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */ +#define DEBUG_INTERRUPT_ERROR /* problems */ +#undef DEBUG_CONFIG_TRACE /* Trace the config functions */ +#undef DEBUG_CONFIG_INFO /* What's going on... */ +#define DEBUG_CONFIG_ERRORS /* Errors on configuration */ +#undef DEBUG_TX_TRACE /* Transmission calls */ +#undef DEBUG_TX_INFO /* Header of the transmitted packet */ +#undef DEBUG_TX_FAIL /* Normal failure conditions */ +#define DEBUG_TX_ERROR /* Unexpected conditions */ +#undef DEBUG_RX_TRACE /* Transmission calls */ +#undef DEBUG_RX_INFO /* Header of the transmitted packet */ +#undef DEBUG_RX_FAIL /* Normal failure conditions */ +#define DEBUG_RX_ERROR /* Unexpected conditions */ +#undef DEBUG_PACKET_DUMP /* Dump packet on the screen */ +#undef DEBUG_IOCTL_TRACE /* Misc call by Linux */ +#undef DEBUG_IOCTL_INFO /* Various debug info */ +#define DEBUG_IOCTL_ERROR /* What's going wrong */ +#define DEBUG_BASIC_SHOW /* Show basic startup info */ +#undef DEBUG_VERSION_SHOW /* Print version info */ +#undef DEBUG_PSA_SHOW /* Dump psa to screen */ +#undef DEBUG_MMC_SHOW /* Dump mmc to screen */ +#undef DEBUG_SHOW_UNUSED /* Show also unused fields */ +#undef DEBUG_I82593_SHOW /* Show i82593 status */ +#undef DEBUG_DEVICE_SHOW /* Show device parameters */ + +/************************ CONSTANTS & MACROS ************************/ + +#ifdef DEBUG_VERSION_SHOW +static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n"; +#endif + +/* Watchdog temporisation */ +#define WATCHDOG_JIFFIES (256*HZ/100) + +/* Fix a bug in some old wireless extension definitions */ +#ifndef IW_ESSID_MAX_SIZE +#define IW_ESSID_MAX_SIZE 32 +#endif + +/* ------------------------ PRIVATE IOCTL ------------------------ */ + +#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ +#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ +#define SIOCSIPROAM SIOCIWFIRSTPRIV + 2 /* Set roaming state */ +#define SIOCGIPROAM SIOCIWFIRSTPRIV + 3 /* Get roaming state */ + +#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 4 /* Set histogram ranges */ +#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 5 /* Get histogram values */ + +/*************************** WaveLAN Roaming **************************/ +#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ + +#define WAVELAN_ROAMING_DEBUG 0 /* 1 = Trace of handover decisions */ + /* 2 = Info on each beacon rcvd... */ +#define MAX_WAVEPOINTS 7 /* Max visible at one time */ +#define WAVEPOINT_HISTORY 5 /* SNR sample history slow search */ +#define WAVEPOINT_FAST_HISTORY 2 /* SNR sample history fast search */ +#define SEARCH_THRESH_LOW 10 /* SNR to enter cell search */ +#define SEARCH_THRESH_HIGH 13 /* SNR to leave cell search */ +#define WAVELAN_ROAMING_DELTA 1 /* Hysteresis value (+/- SNR) */ +#define CELL_TIMEOUT 2*HZ /* in jiffies */ + +#define FAST_CELL_SEARCH 1 /* Boolean values... */ +#define NWID_PROMISC 1 /* for code clarity. */ + +typedef struct wavepoint_beacon +{ + unsigned char dsap, /* Unused */ + ssap, /* Unused */ + ctrl, /* Unused */ + O,U,I, /* Unused */ + spec_id1, /* Unused */ + spec_id2, /* Unused */ + pdu_type, /* Unused */ + seq; /* WavePoint beacon sequence number */ + unsigned short domain_id, /* WavePoint Domain ID */ + nwid; /* WavePoint NWID */ +} wavepoint_beacon; + +typedef struct wavepoint_history +{ + unsigned short nwid; /* WavePoint's NWID */ + int average_slow; /* SNR running average */ + int average_fast; /* SNR running average */ + unsigned char sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */ + unsigned char qualptr; /* Index into ringbuffer */ + unsigned char last_seq; /* Last seq. no seen for WavePoint */ + struct wavepoint_history *next; /* Next WavePoint in table */ + struct wavepoint_history *prev; /* Previous WavePoint in table */ + unsigned long last_seen; /* Time of last beacon recvd, jiffies */ +} wavepoint_history; + +struct wavepoint_table +{ + wavepoint_history *head; /* Start of ringbuffer */ + int num_wavepoints; /* No. of WavePoints visible */ + unsigned char locked; /* Table lock */ +}; + +#endif /* WAVELAN_ROAMING */ + +/****************************** TYPES ******************************/ + +/* Shortcuts */ +typedef struct net_device_stats en_stats; +typedef struct iw_statistics iw_stats; +typedef struct iw_quality iw_qual; +typedef struct iw_freq iw_freq; +typedef struct net_local net_local; +typedef struct timer_list timer_list; + +/* Basic types */ +typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ + +/* + * Static specific data for the interface. + * + * For each network interface, Linux keep data in two structure. "device" + * keep the generic data (same format for everybody) and "net_local" keep + * the additional specific data. + * Note that some of this specific data is in fact generic (en_stats, for + * example). + */ +struct net_local +{ + dev_node_t node; /* ???? What is this stuff ???? */ + struct net_device * dev; /* Reverse link... */ + spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ + dev_link_t * link; /* pcmcia structure */ + en_stats stats; /* Ethernet interface statistics */ + int nresets; /* Number of hw resets */ + u_char configured; /* If it is configured */ + u_char reconfig_82593; /* Need to reconfigure the controller */ + u_char promiscuous; /* Promiscuous mode */ + u_char allmulticast; /* All Multicast mode */ + int mc_count; /* Number of multicast addresses */ + + int stop; /* Current i82593 Stop Hit Register */ + int rfp; /* Last DMA machine receive pointer */ + int overrunning; /* Receiver overrun flag */ + +#ifdef WIRELESS_EXT + iw_stats wstats; /* Wireless specific stats */ + + struct iw_spy_data spy_data; + struct iw_public_data wireless_data; +#endif + +#ifdef HISTOGRAM + int his_number; /* Number of intervals */ + u_char his_range[16]; /* Boundaries of interval ]n-1; n] */ + u_long his_sum[16]; /* Sum in interval */ +#endif /* HISTOGRAM */ +#ifdef WAVELAN_ROAMING + u_long domain_id; /* Domain ID we lock on for roaming */ + int filter_domains; /* Check Domain ID of beacon found */ + struct wavepoint_table wavepoint_table; /* Table of visible WavePoints*/ + wavepoint_history * curr_point; /* Current wavepoint */ + int cell_search; /* Searching for new cell? */ + struct timer_list cell_timer; /* Garbage collection */ +#endif /* WAVELAN_ROAMING */ + void __iomem *mem; +}; + +/**************************** PROTOTYPES ****************************/ + +#ifdef WAVELAN_ROAMING +/* ---------------------- ROAMING SUBROUTINES -----------------------*/ + +wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp); +wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local *lp); +void wl_del_wavepoint(wavepoint_history *wavepoint, net_local *lp); +void wl_cell_expiry(unsigned long data); +wavepoint_history *wl_best_sigqual(int fast_search, net_local *lp); +void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq); +void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp); +void wv_nwid_filter(unsigned char mode, net_local *lp); +void wv_roam_init(struct net_device *dev); +void wv_roam_cleanup(struct net_device *dev); +#endif /* WAVELAN_ROAMING */ + +/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ +static inline u_char /* data */ + hasr_read(u_long); /* Read the host interface : base address */ +static inline void + hacr_write(u_long, /* Write to host interface : base address */ + u_char), /* data */ + hacr_write_slow(u_long, + u_char); +static void + psa_read(struct net_device *, /* Read the Parameter Storage Area */ + int, /* offset in PSA */ + u_char *, /* buffer to fill */ + int), /* size to read */ + psa_write(struct net_device *, /* Write to the PSA */ + int, /* Offset in psa */ + u_char *, /* Buffer in memory */ + int); /* Length of buffer */ +static inline void + mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */ + u_short, + u_char), + mmc_write(u_long, /* Write n bytes to the MMC */ + u_char, + u_char *, + int); +static inline u_char /* Read 1 byte from the MMC */ + mmc_in(u_long, + u_short); +static inline void + mmc_read(u_long, /* Read n bytes from the MMC */ + u_char, + u_char *, + int), + fee_wait(u_long, /* Wait for frequency EEprom : base address */ + int, /* Base delay to wait for */ + int); /* Number of time to wait */ +static void + fee_read(u_long, /* Read the frequency EEprom : base address */ + u_short, /* destination offset */ + u_short *, /* data buffer */ + int); /* number of registers */ +/* ---------------------- I82593 SUBROUTINES ----------------------- */ +static int + wv_82593_cmd(struct net_device *, /* synchronously send a command to i82593 */ + char *, + int, + int); +static inline int + wv_diag(struct net_device *); /* Diagnostique the i82593 */ +static int + read_ringbuf(struct net_device *, /* Read a receive buffer */ + int, + char *, + int); +static inline void + wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */ +/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ +static inline void + wv_init_info(struct net_device *); /* display startup info */ +/* ------------------- IOCTL, STATS & RECONFIG ------------------- */ +static en_stats * + wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */ +static iw_stats * + wavelan_get_wireless_stats(struct net_device *); +/* ----------------------- PACKET RECEPTION ----------------------- */ +static inline int + wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */ + int, /* end of frame */ + int); /* start of buffer */ +static inline void + wv_packet_read(struct net_device *, /* Read a packet from a frame */ + int, + int), + wv_packet_rcv(struct net_device *); /* Read all packets waiting */ +/* --------------------- PACKET TRANSMISSION --------------------- */ +static inline void + wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */ + void *, + short); +static int + wavelan_packet_xmit(struct sk_buff *, /* Send a packet */ + struct net_device *); +/* -------------------- HARDWARE CONFIGURATION -------------------- */ +static inline int + wv_mmc_init(struct net_device *); /* Initialize the modem */ +static int + wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */ + wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */ +static int + wv_82593_config(struct net_device *); /* Configure the i82593 */ +static inline int + wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */ +static int + wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */ +static inline void + wv_hw_reset(struct net_device *); /* Same, + start receiver unit */ +static inline int + wv_pcmcia_config(dev_link_t *); /* Configure the pcmcia interface */ +static void + wv_pcmcia_release(dev_link_t *);/* Remove a device */ +/* ---------------------- INTERRUPT HANDLING ---------------------- */ +static irqreturn_t + wavelan_interrupt(int, /* Interrupt handler */ + void *, + struct pt_regs *); +static void + wavelan_watchdog(struct net_device *); /* Transmission watchdog */ +/* ------------------- CONFIGURATION CALLBACKS ------------------- */ +static int + wavelan_open(struct net_device *), /* Open the device */ + wavelan_close(struct net_device *); /* Close the device */ +static dev_link_t * + wavelan_attach(void); /* Create a new device */ +static void + wavelan_detach(dev_link_t *); /* Destroy a removed device */ +static int + wavelan_event(event_t, /* Manage pcmcia events */ + int, + event_callback_args_t *); + +/**************************** VARIABLES ****************************/ + +static dev_info_t dev_info = "wavelan_cs"; +static dev_link_t *dev_list = NULL; /* Linked list of devices */ + +/* + * Parameters that can be set with 'insmod' + * The exact syntax is 'insmod wavelan_cs.o <var>=<value>' + */ + +/* Shared memory speed, in ns */ +static int mem_speed = 0; + +/* New module interface */ +module_param(mem_speed, int, 0); + +#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ +/* Enable roaming mode ? No ! Please keep this to 0 */ +static int do_roaming = 0; +module_param(do_roaming, bool, 0); +#endif /* WAVELAN_ROAMING */ + +MODULE_LICENSE("GPL"); + +#endif /* WAVELAN_CS_P_H */ + diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h new file mode 100644 index 00000000000..8636d930678 --- /dev/null +++ b/drivers/net/wireless/wl3501.h @@ -0,0 +1,614 @@ +#ifndef __WL3501_H__ +#define __WL3501_H__ + +#include <linux/spinlock.h> +#include "ieee802_11.h" + +/* define for WLA 2.0 */ +#define WL3501_BLKSZ 256 +/* + * ID for input Signals of DRIVER block + * bit[7-5] is block ID: 000 + * bit[4-0] is signal ID +*/ +enum wl3501_signals { + WL3501_SIG_ALARM, + WL3501_SIG_MD_CONFIRM, + WL3501_SIG_MD_IND, + WL3501_SIG_ASSOC_CONFIRM, + WL3501_SIG_ASSOC_IND, + WL3501_SIG_AUTH_CONFIRM, + WL3501_SIG_AUTH_IND, + WL3501_SIG_DEAUTH_CONFIRM, + WL3501_SIG_DEAUTH_IND, + WL3501_SIG_DISASSOC_CONFIRM, + WL3501_SIG_DISASSOC_IND, + WL3501_SIG_GET_CONFIRM, + WL3501_SIG_JOIN_CONFIRM, + WL3501_SIG_PWR_MGMT_CONFIRM, + WL3501_SIG_REASSOC_CONFIRM, + WL3501_SIG_REASSOC_IND, + WL3501_SIG_SCAN_CONFIRM, + WL3501_SIG_SET_CONFIRM, + WL3501_SIG_START_CONFIRM, + WL3501_SIG_RESYNC_CONFIRM, + WL3501_SIG_SITE_CONFIRM, + WL3501_SIG_SAVE_CONFIRM, + WL3501_SIG_RFTEST_CONFIRM, +/* + * ID for input Signals of MLME block + * bit[7-5] is block ID: 010 + * bit[4-0] is signal ID + */ + WL3501_SIG_ASSOC_REQ = 0x20, + WL3501_SIG_AUTH_REQ, + WL3501_SIG_DEAUTH_REQ, + WL3501_SIG_DISASSOC_REQ, + WL3501_SIG_GET_REQ, + WL3501_SIG_JOIN_REQ, + WL3501_SIG_PWR_MGMT_REQ, + WL3501_SIG_REASSOC_REQ, + WL3501_SIG_SCAN_REQ, + WL3501_SIG_SET_REQ, + WL3501_SIG_START_REQ, + WL3501_SIG_MD_REQ, + WL3501_SIG_RESYNC_REQ, + WL3501_SIG_SITE_REQ, + WL3501_SIG_SAVE_REQ, + WL3501_SIG_RF_TEST_REQ, + WL3501_SIG_MM_CONFIRM = 0x60, + WL3501_SIG_MM_IND, +}; + +enum wl3501_mib_attribs { + WL3501_MIB_ATTR_STATION_ID, + WL3501_MIB_ATTR_AUTH_ALGORITHMS, + WL3501_MIB_ATTR_AUTH_TYPE, + WL3501_MIB_ATTR_MEDIUM_OCCUPANCY_LIMIT, + WL3501_MIB_ATTR_CF_POLLABLE, + WL3501_MIB_ATTR_CFP_PERIOD, + WL3501_MIB_ATTR_CFPMAX_DURATION, + WL3501_MIB_ATTR_AUTH_RESP_TMOUT, + WL3501_MIB_ATTR_RX_DTIMS, + WL3501_MIB_ATTR_PRIV_OPT_IMPLEMENTED, + WL3501_MIB_ATTR_PRIV_INVOKED, + WL3501_MIB_ATTR_WEP_DEFAULT_KEYS, + WL3501_MIB_ATTR_WEP_DEFAULT_KEY_ID, + WL3501_MIB_ATTR_WEP_KEY_MAPPINGS, + WL3501_MIB_ATTR_WEP_KEY_MAPPINGS_LEN, + WL3501_MIB_ATTR_EXCLUDE_UNENCRYPTED, + WL3501_MIB_ATTR_WEP_ICV_ERROR_COUNT, + WL3501_MIB_ATTR_WEP_UNDECRYPTABLE_COUNT, + WL3501_MIB_ATTR_WEP_EXCLUDED_COUNT, + WL3501_MIB_ATTR_MAC_ADDR, + WL3501_MIB_ATTR_GROUP_ADDRS, + WL3501_MIB_ATTR_RTS_THRESHOLD, + WL3501_MIB_ATTR_SHORT_RETRY_LIMIT, + WL3501_MIB_ATTR_LONG_RETRY_LIMIT, + WL3501_MIB_ATTR_FRAG_THRESHOLD, + WL3501_MIB_ATTR_MAX_TX_MSDU_LIFETIME, + WL3501_MIB_ATTR_MAX_RX_LIFETIME, + WL3501_MIB_ATTR_MANUFACTURER_ID, + WL3501_MIB_ATTR_PRODUCT_ID, + WL3501_MIB_ATTR_TX_FRAG_COUNT, + WL3501_MIB_ATTR_MULTICAST_TX_FRAME_COUNT, + WL3501_MIB_ATTR_FAILED_COUNT, + WL3501_MIB_ATTR_RX_FRAG_COUNT, + WL3501_MIB_ATTR_MULTICAST_RX_COUNT, + WL3501_MIB_ATTR_FCS_ERROR_COUNT, + WL3501_MIB_ATTR_RETRY_COUNT, + WL3501_MIB_ATTR_MULTIPLE_RETRY_COUNT, + WL3501_MIB_ATTR_RTS_SUCCESS_COUNT, + WL3501_MIB_ATTR_RTS_FAILURE_COUNT, + WL3501_MIB_ATTR_ACK_FAILURE_COUNT, + WL3501_MIB_ATTR_FRAME_DUPLICATE_COUNT, + WL3501_MIB_ATTR_PHY_TYPE, + WL3501_MIB_ATTR_REG_DOMAINS_SUPPORT, + WL3501_MIB_ATTR_CURRENT_REG_DOMAIN, + WL3501_MIB_ATTR_SLOT_TIME, + WL3501_MIB_ATTR_CCA_TIME, + WL3501_MIB_ATTR_RX_TX_TURNAROUND_TIME, + WL3501_MIB_ATTR_TX_PLCP_DELAY, + WL3501_MIB_ATTR_RX_TX_SWITCH_TIME, + WL3501_MIB_ATTR_TX_RAMP_ON_TIME, + WL3501_MIB_ATTR_TX_RF_DELAY, + WL3501_MIB_ATTR_SIFS_TIME, + WL3501_MIB_ATTR_RX_RF_DELAY, + WL3501_MIB_ATTR_RX_PLCP_DELAY, + WL3501_MIB_ATTR_MAC_PROCESSING_DELAY, + WL3501_MIB_ATTR_TX_RAMP_OFF_TIME, + WL3501_MIB_ATTR_PREAMBLE_LEN, + WL3501_MIB_ATTR_PLCP_HEADER_LEN, + WL3501_MIB_ATTR_MPDU_DURATION_FACTOR, + WL3501_MIB_ATTR_AIR_PROPAGATION_TIME, + WL3501_MIB_ATTR_TEMP_TYPE, + WL3501_MIB_ATTR_CW_MIN, + WL3501_MIB_ATTR_CW_MAX, + WL3501_MIB_ATTR_SUPPORT_DATA_RATES_TX, + WL3501_MIB_ATTR_SUPPORT_DATA_RATES_RX, + WL3501_MIB_ATTR_MPDU_MAX_LEN, + WL3501_MIB_ATTR_SUPPORT_TX_ANTENNAS, + WL3501_MIB_ATTR_CURRENT_TX_ANTENNA, + WL3501_MIB_ATTR_SUPPORT_RX_ANTENNAS, + WL3501_MIB_ATTR_DIVERSITY_SUPPORT, + WL3501_MIB_ATTR_DIVERSITY_SELECTION_RS, + WL3501_MIB_ATTR_NR_SUPPORTED_PWR_LEVELS, + WL3501_MIB_ATTR_TX_PWR_LEVEL1, + WL3501_MIB_ATTR_TX_PWR_LEVEL2, + WL3501_MIB_ATTR_TX_PWR_LEVEL3, + WL3501_MIB_ATTR_TX_PWR_LEVEL4, + WL3501_MIB_ATTR_TX_PWR_LEVEL5, + WL3501_MIB_ATTR_TX_PWR_LEVEL6, + WL3501_MIB_ATTR_TX_PWR_LEVEL7, + WL3501_MIB_ATTR_TX_PWR_LEVEL8, + WL3501_MIB_ATTR_CURRENT_TX_PWR_LEVEL, + WL3501_MIB_ATTR_CURRENT_CHAN, + WL3501_MIB_ATTR_CCA_MODE_SUPPORTED, + WL3501_MIB_ATTR_CURRENT_CCA_MODE, + WL3501_MIB_ATTR_ED_THRESHOLD, + WL3501_MIB_ATTR_SINTHESIZER_LOCKED, + WL3501_MIB_ATTR_CURRENT_PWR_STATE, + WL3501_MIB_ATTR_DOZE_TURNON_TIME, + WL3501_MIB_ATTR_RCR33, + WL3501_MIB_ATTR_DEFAULT_CHAN, + WL3501_MIB_ATTR_SSID, + WL3501_MIB_ATTR_PWR_MGMT_ENABLE, + WL3501_MIB_ATTR_NET_CAPABILITY, + WL3501_MIB_ATTR_ROUTING, +}; + +enum wl3501_net_type { + WL3501_NET_TYPE_INFRA, + WL3501_NET_TYPE_ADHOC, + WL3501_NET_TYPE_ANY_BSS, +}; + +enum wl3501_scan_type { + WL3501_SCAN_TYPE_ACTIVE, + WL3501_SCAN_TYPE_PASSIVE, +}; + +enum wl3501_tx_result { + WL3501_TX_RESULT_SUCCESS, + WL3501_TX_RESULT_NO_BSS, + WL3501_TX_RESULT_RETRY_LIMIT, +}; + +enum wl3501_sys_type { + WL3501_SYS_TYPE_OPEN, + WL3501_SYS_TYPE_SHARE_KEY, +}; + +enum wl3501_status { + WL3501_STATUS_SUCCESS, + WL3501_STATUS_INVALID, + WL3501_STATUS_TIMEOUT, + WL3501_STATUS_REFUSED, + WL3501_STATUS_MANY_REQ, + WL3501_STATUS_ALREADY_BSS, +}; + +#define WL3501_MGMT_CAPABILITY_ESS 0x0001 /* see 802.11 p.58 */ +#define WL3501_MGMT_CAPABILITY_IBSS 0x0002 /* - " - */ +#define WL3501_MGMT_CAPABILITY_CF_POLLABLE 0x0004 /* - " - */ +#define WL3501_MGMT_CAPABILITY_CF_POLL_REQUEST 0x0008 /* - " - */ +#define WL3501_MGMT_CAPABILITY_PRIVACY 0x0010 /* - " - */ + +#define IW_REG_DOMAIN_FCC 0x10 /* Channel 1 to 11 USA */ +#define IW_REG_DOMAIN_DOC 0x20 /* Channel 1 to 11 Canada */ +#define IW_REG_DOMAIN_ETSI 0x30 /* Channel 1 to 13 Europe */ +#define IW_REG_DOMAIN_SPAIN 0x31 /* Channel 10 to 11 Spain */ +#define IW_REG_DOMAIN_FRANCE 0x32 /* Channel 10 to 13 France */ +#define IW_REG_DOMAIN_MKK 0x40 /* Channel 14 Japan */ +#define IW_REG_DOMAIN_MKK1 0x41 /* Channel 1-14 Japan */ +#define IW_REG_DOMAIN_ISRAEL 0x50 /* Channel 3 - 9 Israel */ + +#define IW_MGMT_RATE_LABEL_MANDATORY 128 /* MSB */ + +enum iw_mgmt_rate_labels { + IW_MGMT_RATE_LABEL_1MBIT = 2, + IW_MGMT_RATE_LABEL_2MBIT = 4, + IW_MGMT_RATE_LABEL_5_5MBIT = 11, + IW_MGMT_RATE_LABEL_11MBIT = 22, +}; + +enum iw_mgmt_info_element_ids { + IW_MGMT_INFO_ELEMENT_SSID, /* Service Set Identity */ + IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES, + IW_MGMT_INFO_ELEMENT_FH_PARAMETER_SET, + IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET, + IW_MGMT_INFO_ELEMENT_CS_PARAMETER_SET, + IW_MGMT_INFO_ELEMENT_CS_TIM, /* Traffic Information Map */ + IW_MGMT_INFO_ELEMENT_IBSS_PARAMETER_SET, + /* 7-15: Reserved, unused */ + IW_MGMT_INFO_ELEMENT_CHALLENGE_TEXT = 16, + /* 17-31 Reserved for challenge text extension */ + /* 32-255 Reserved, unused */ +}; + +struct iw_mgmt_info_element { + u8 id; /* one of enum iw_mgmt_info_element_ids, + but sizeof(enum) > sizeof(u8) :-( */ + u8 len; + u8 data[0]; +} __attribute__ ((packed)); + +struct iw_mgmt_essid_pset { + struct iw_mgmt_info_element el; + u8 essid[IW_ESSID_MAX_SIZE]; +} __attribute__ ((packed)); + +/* + * According to 802.11 Wireless Netowors, the definitive guide - O'Reilly + * Pg 75 + */ +#define IW_DATA_RATE_MAX_LABELS 8 + +struct iw_mgmt_data_rset { + struct iw_mgmt_info_element el; + u8 data_rate_labels[IW_DATA_RATE_MAX_LABELS]; +} __attribute__ ((packed)); + +struct iw_mgmt_ds_pset { + struct iw_mgmt_info_element el; + u8 chan; +} __attribute__ ((packed)); + +struct iw_mgmt_cf_pset { + struct iw_mgmt_info_element el; + u8 cfp_count; + u8 cfp_period; + u16 cfp_max_duration; + u16 cfp_dur_remaining; +} __attribute__ ((packed)); + +struct iw_mgmt_ibss_pset { + struct iw_mgmt_info_element el; + u16 atim_window; +} __attribute__ ((packed)); + +struct wl3501_tx_hdr { + u16 tx_cnt; + u8 sync[16]; + u16 sfd; + u8 signal; + u8 service; + u16 len; + u16 crc16; + u16 frame_ctrl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctrl; + u8 addr4[ETH_ALEN]; +}; + +struct wl3501_rx_hdr { + u16 rx_next_blk; + u16 rc_next_frame_blk; + u8 rx_blk_ctrl; + u8 rx_next_frame; + u8 rx_next_frame1; + u8 rssi; + char time[8]; + u8 signal; + u8 service; + u16 len; + u16 crc16; + u16 frame_ctrl; + u16 duration; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq; + u8 addr4[ETH_ALEN]; +}; + +struct wl3501_start_req { + u16 next_blk; + u8 sig_id; + u8 bss_type; + u16 beacon_period; + u16 dtim_period; + u16 probe_delay; + u16 cap_info; + struct iw_mgmt_essid_pset ssid; + struct iw_mgmt_data_rset bss_basic_rset; + struct iw_mgmt_data_rset operational_rset; + struct iw_mgmt_cf_pset cf_pset; + struct iw_mgmt_ds_pset ds_pset; + struct iw_mgmt_ibss_pset ibss_pset; +}; + +struct wl3501_assoc_req { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 timeout; + u16 cap_info; + u16 listen_interval; + u8 mac_addr[ETH_ALEN]; +}; + +struct wl3501_assoc_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 status; +}; + +struct wl3501_assoc_ind { + u16 next_blk; + u8 sig_id; + u8 mac_addr[ETH_ALEN]; +}; + +struct wl3501_auth_req { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 type; + u16 timeout; + u8 mac_addr[ETH_ALEN]; +}; + +struct wl3501_auth_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 type; + u16 status; + u8 mac_addr[ETH_ALEN]; +}; + +struct wl3501_get_req { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 mib_attrib; +}; + +struct wl3501_get_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 mib_status; + u16 mib_attrib; + u8 mib_value[100]; +}; + +struct wl3501_join_req { + u16 next_blk; + u8 sig_id; + u8 reserved; + struct iw_mgmt_data_rset operational_rset; + u16 reserved2; + u16 timeout; + u16 probe_delay; + u8 timestamp[8]; + u8 local_time[8]; + u16 beacon_period; + u16 dtim_period; + u16 cap_info; + u8 bss_type; + u8 bssid[ETH_ALEN]; + struct iw_mgmt_essid_pset ssid; + struct iw_mgmt_ds_pset ds_pset; + struct iw_mgmt_cf_pset cf_pset; + struct iw_mgmt_ibss_pset ibss_pset; + struct iw_mgmt_data_rset bss_basic_rset; +}; + +struct wl3501_join_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 status; +}; + +struct wl3501_pwr_mgmt_req { + u16 next_blk; + u8 sig_id; + u8 pwr_save; + u8 wake_up; + u8 receive_dtims; +}; + +struct wl3501_pwr_mgmt_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 status; +}; + +struct wl3501_scan_req { + u16 next_blk; + u8 sig_id; + u8 bss_type; + u16 probe_delay; + u16 min_chan_time; + u16 max_chan_time; + u8 chan_list[14]; + u8 bssid[ETH_ALEN]; + struct iw_mgmt_essid_pset ssid; + enum wl3501_scan_type scan_type; +}; + +struct wl3501_scan_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 status; + char timestamp[8]; + char localtime[8]; + u16 beacon_period; + u16 dtim_period; + u16 cap_info; + u8 bss_type; + u8 bssid[ETH_ALEN]; + struct iw_mgmt_essid_pset ssid; + struct iw_mgmt_ds_pset ds_pset; + struct iw_mgmt_cf_pset cf_pset; + struct iw_mgmt_ibss_pset ibss_pset; + struct iw_mgmt_data_rset bss_basic_rset; + u8 rssi; +}; + +struct wl3501_start_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 status; +}; + +struct wl3501_md_req { + u16 next_blk; + u8 sig_id; + u8 routing; + u16 data; + u16 size; + u8 pri; + u8 service_class; + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; +}; + +struct wl3501_md_ind { + u16 next_blk; + u8 sig_id; + u8 routing; + u16 data; + u16 size; + u8 reception; + u8 pri; + u8 service_class; + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; +}; + +struct wl3501_md_confirm { + u16 next_blk; + u8 sig_id; + u8 reserved; + u16 data; + u8 status; + u8 pri; + u8 service_class; +}; + +struct wl3501_resync_req { + u16 next_blk; + u8 sig_id; +}; + +/* Definitions for supporting clone adapters. */ +/* System Interface Registers (SIR space) */ +#define WL3501_NIC_GCR ((u8)0x00) /* SIR0 - General Conf Register */ +#define WL3501_NIC_BSS ((u8)0x01) /* SIR1 - Bank Switching Select Reg */ +#define WL3501_NIC_LMAL ((u8)0x02) /* SIR2 - Local Mem addr Reg [7:0] */ +#define WL3501_NIC_LMAH ((u8)0x03) /* SIR3 - Local Mem addr Reg [14:8] */ +#define WL3501_NIC_IODPA ((u8)0x04) /* SIR4 - I/O Data Port A */ +#define WL3501_NIC_IODPB ((u8)0x05) /* SIR5 - I/O Data Port B */ +#define WL3501_NIC_IODPC ((u8)0x06) /* SIR6 - I/O Data Port C */ +#define WL3501_NIC_IODPD ((u8)0x07) /* SIR7 - I/O Data Port D */ + +/* Bits in GCR */ +#define WL3501_GCR_SWRESET ((u8)0x80) +#define WL3501_GCR_CORESET ((u8)0x40) +#define WL3501_GCR_DISPWDN ((u8)0x20) +#define WL3501_GCR_ECWAIT ((u8)0x10) +#define WL3501_GCR_ECINT ((u8)0x08) +#define WL3501_GCR_INT2EC ((u8)0x04) +#define WL3501_GCR_ENECINT ((u8)0x02) +#define WL3501_GCR_DAM ((u8)0x01) + +/* Bits in BSS (Bank Switching Select Register) */ +#define WL3501_BSS_FPAGE0 ((u8)0x20) /* Flash memory page0 */ +#define WL3501_BSS_FPAGE1 ((u8)0x28) +#define WL3501_BSS_FPAGE2 ((u8)0x30) +#define WL3501_BSS_FPAGE3 ((u8)0x38) +#define WL3501_BSS_SPAGE0 ((u8)0x00) /* SRAM page0 */ +#define WL3501_BSS_SPAGE1 ((u8)0x08) +#define WL3501_BSS_SPAGE2 ((u8)0x10) +#define WL3501_BSS_SPAGE3 ((u8)0x18) + +/* Define Driver Interface */ +/* Refer IEEE 802.11 */ +/* Tx packet header, include PLCP and MPDU */ +/* Tx PLCP Header */ +struct wl3501_80211_tx_plcp_hdr { + u8 sync[16]; + u16 sfd; + u8 signal; + u8 service; + u16 len; + u16 crc16; +} __attribute__ ((packed)); + +struct wl3501_80211_tx_hdr { + struct wl3501_80211_tx_plcp_hdr pclp_hdr; + struct ieee802_11_hdr mac_hdr; +} __attribute__ ((packed)); + +/* + Reserve the beginning Tx space for descriptor use. + + TxBlockOffset --> *----*----*----*----* \ + (TxFreeDesc) | 0 | 1 | 2 | 3 | \ + | 4 | 5 | 6 | 7 | | + | 8 | 9 | 10 | 11 | TX_DESC * 20 + | 12 | 13 | 14 | 15 | | + | 16 | 17 | 18 | 19 | / + TxBufferBegin --> *----*----*----*----* / + (TxBufferHead) | | + (TxBufferTail) | | + | Send Buffer | + | | + | | + *-------------------* + TxBufferEnd -------------------------/ + +*/ + +struct wl3501_card { + int base_addr; + u8 mac_addr[ETH_ALEN]; + spinlock_t lock; + wait_queue_head_t wait; + struct wl3501_get_confirm sig_get_confirm; + struct wl3501_pwr_mgmt_confirm sig_pwr_mgmt_confirm; + u16 tx_buffer_size; + u16 tx_buffer_head; + u16 tx_buffer_tail; + u16 tx_buffer_cnt; + u16 esbq_req_start; + u16 esbq_req_end; + u16 esbq_req_head; + u16 esbq_req_tail; + u16 esbq_confirm_start; + u16 esbq_confirm_end; + u16 esbq_confirm; + struct iw_mgmt_essid_pset essid; + struct iw_mgmt_essid_pset keep_essid; + u8 bssid[ETH_ALEN]; + int net_type; + char nick[32]; + char card_name[32]; + char firmware_date[32]; + u8 chan; + u8 cap_info; + u16 start_seg; + u16 bss_cnt; + u16 join_sta_bss; + u8 rssi; + u8 adhoc_times; + u8 reg_domain; + u8 version[2]; + struct wl3501_scan_confirm bss_set[20]; + struct net_device_stats stats; + struct iw_statistics wstats; + struct iw_spy_data spy_data; + struct dev_node_t node; +}; +#endif diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c new file mode 100644 index 00000000000..1433e5aaf1b --- /dev/null +++ b/drivers/net/wireless/wl3501_cs.c @@ -0,0 +1,2270 @@ +/* + * WL3501 Wireless LAN PCMCIA Card Driver for Linux + * Written originally for Linux 2.0.30 by Fox Chen, mhchen@golf.ccl.itri.org.tw + * Ported to 2.2, 2.4 & 2.5 by Arnaldo Carvalho de Melo <acme@conectiva.com.br> + * Wireless extensions in 2.4 by Gustavo Niemeyer <niemeyer@conectiva.com> + * + * References used by Fox Chen while writing the original driver for 2.0.30: + * + * 1. WL24xx packet drivers (tooasm.asm) + * 2. Access Point Firmware Interface Specification for IEEE 802.11 SUTRO + * 3. IEEE 802.11 + * 4. Linux network driver (/usr/src/linux/drivers/net) + * 5. ISA card driver - wl24.c + * 6. Linux PCMCIA skeleton driver - skeleton.c + * 7. Linux PCMCIA 3c589 network driver - 3c589_cs.c + * + * Tested with WL2400 firmware 1.2, Linux 2.0.30, and pcmcia-cs-2.9.12 + * 1. Performance: about 165 Kbytes/sec in TCP/IP with Ad-Hoc mode. + * rsh 192.168.1.3 "dd if=/dev/zero bs=1k count=1000" > /dev/null + * (Specification 2M bits/sec. is about 250 Kbytes/sec., but we must deduct + * ETHER/IP/UDP/TCP header, and acknowledgement overhead) + * + * Tested with Planet AP in 2.4.17, 184 Kbytes/s in UDP in Infrastructure mode, + * 173 Kbytes/s in TCP. + * + * Tested with Planet AP in 2.5.73-bk, 216 Kbytes/s in Infrastructure mode + * with a SMP machine (dual pentium 100), using pktgen, 432 pps (pkt_size = 60) + */ +#undef REALLY_SLOW_IO /* most systems can safely undef this */ + +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/ethtool.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/fcntl.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/wireless.h> + +#include <net/iw_handler.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +#include "wl3501.h" + +#ifndef __i386__ +#define slow_down_io() +#endif + +/* For rough constant delay */ +#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); } + +/* + * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not + * define PCMCIA_DEBUG at all, all the debug code will be left out. If you + * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled -- + * but it can then be enabled for specific modules at load time with a + * 'pc_debug=#' option to insmod. + */ +#define PCMCIA_DEBUG 0 +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +#define dprintk(n, format, args...) \ + { if (pc_debug > (n)) \ + printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##args); } +#else +#define dprintk(n, format, args...) +#endif + +#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); } +#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); } +#define wl3501_outsb(a, b, c) { outsb(a, b, c); slow_down_io(); } + +#define WL3501_RELEASE_TIMEOUT (25 * HZ) +#define WL3501_MAX_ADHOC_TRIES 16 + +#define WL3501_RESUME 0 +#define WL3501_SUSPEND 1 + +/* + * The event() function is this driver's Card Services event handler. It will + * be called by Card Services when an appropriate card status event is + * received. The config() and release() entry points are used to configure or + * release a socket, in response to card insertion and ejection events. They + * are invoked from the wl24 event handler. + */ +static void wl3501_config(dev_link_t *link); +static void wl3501_release(dev_link_t *link); +static int wl3501_event(event_t event, int pri, event_callback_args_t *args); + +/* + * The dev_info variable is the "key" that is used to match up this + * device driver with appropriate cards, through the card configuration + * database. + */ +static dev_info_t wl3501_dev_info = "wl3501_cs"; + +static int wl3501_chan2freq[] = { + [0] = 2412, [1] = 2417, [2] = 2422, [3] = 2427, [4] = 2432, + [5] = 2437, [6] = 2442, [7] = 2447, [8] = 2452, [9] = 2457, + [10] = 2462, [11] = 2467, [12] = 2472, [13] = 2477, +}; + +static const struct { + int reg_domain; + int min, max, deflt; +} iw_channel_table[] = { + { + .reg_domain = IW_REG_DOMAIN_FCC, + .min = 1, + .max = 11, + .deflt = 1, + }, + { + .reg_domain = IW_REG_DOMAIN_DOC, + .min = 1, + .max = 11, + .deflt = 1, + }, + { + .reg_domain = IW_REG_DOMAIN_ETSI, + .min = 1, + .max = 13, + .deflt = 1, + }, + { + .reg_domain = IW_REG_DOMAIN_SPAIN, + .min = 10, + .max = 11, + .deflt = 10, + }, + { + .reg_domain = IW_REG_DOMAIN_FRANCE, + .min = 10, + .max = 13, + .deflt = 10, + }, + { + .reg_domain = IW_REG_DOMAIN_MKK, + .min = 14, + .max = 14, + .deflt = 14, + }, + { + .reg_domain = IW_REG_DOMAIN_MKK1, + .min = 1, + .max = 14, + .deflt = 1, + }, + { + .reg_domain = IW_REG_DOMAIN_ISRAEL, + .min = 3, + .max = 9, + .deflt = 9, + }, +}; + +/** + * iw_valid_channel - validate channel in regulatory domain + * @reg_comain - regulatory domain + * @channel - channel to validate + * + * Returns 0 if invalid in the specified regulatory domain, non-zero if valid. + */ +static int iw_valid_channel(int reg_domain, int channel) +{ + int i, rc = 0; + + for (i = 0; i < ARRAY_SIZE(iw_channel_table); i++) + if (reg_domain == iw_channel_table[i].reg_domain) { + rc = channel >= iw_channel_table[i].min && + channel <= iw_channel_table[i].max; + break; + } + return rc; +} + +/** + * iw_default_channel - get default channel for a regulatory domain + * @reg_comain - regulatory domain + * + * Returns the default channel for a regulatory domain + */ +static int iw_default_channel(int reg_domain) +{ + int i, rc = 1; + + for (i = 0; i < ARRAY_SIZE(iw_channel_table); i++) + if (reg_domain == iw_channel_table[i].reg_domain) { + rc = iw_channel_table[i].deflt; + break; + } + return rc; +} + +static void iw_set_mgmt_info_element(enum iw_mgmt_info_element_ids id, + struct iw_mgmt_info_element *el, + void *value, int len) +{ + el->id = id; + el->len = len; + memcpy(el->data, value, len); +} + +static void iw_copy_mgmt_info_element(struct iw_mgmt_info_element *to, + struct iw_mgmt_info_element *from) +{ + iw_set_mgmt_info_element(from->id, to, from->data, from->len); +} + +/* + * A linked list of "instances" of the wl24 device. Each actual PCMCIA card + * corresponds to one device instance, and is described by one dev_link_t + * structure (defined in ds.h). + * + * You may not want to use a linked list for this -- for example, the memory + * card driver uses an array of dev_link_t pointers, where minor device numbers + * are used to derive the corresponding array index. + */ +static dev_link_t *wl3501_dev_list; + +static inline void wl3501_switch_page(struct wl3501_card *this, u8 page) +{ + wl3501_outb(page, this->base_addr + WL3501_NIC_BSS); +} + +/* + * Get Ethernet MAC addresss. + * + * WARNING: We switch to FPAGE0 and switc back again. + * Making sure there is no other WL function beening called by ISR. + */ +static int wl3501_get_flash_mac_addr(struct wl3501_card *this) +{ + int base_addr = this->base_addr; + + /* get MAC addr */ + wl3501_outb(WL3501_BSS_FPAGE3, base_addr + WL3501_NIC_BSS); /* BSS */ + wl3501_outb(0x00, base_addr + WL3501_NIC_LMAL); /* LMAL */ + wl3501_outb(0x40, base_addr + WL3501_NIC_LMAH); /* LMAH */ + + /* wait for reading EEPROM */ + WL3501_NOPLOOP(100); + this->mac_addr[0] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->mac_addr[1] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->mac_addr[2] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->mac_addr[3] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->mac_addr[4] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->mac_addr[5] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->reg_domain = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + wl3501_outb(WL3501_BSS_FPAGE0, base_addr + WL3501_NIC_BSS); + wl3501_outb(0x04, base_addr + WL3501_NIC_LMAL); + wl3501_outb(0x40, base_addr + WL3501_NIC_LMAH); + WL3501_NOPLOOP(100); + this->version[0] = inb(base_addr + WL3501_NIC_IODPA); + WL3501_NOPLOOP(100); + this->version[1] = inb(base_addr + WL3501_NIC_IODPA); + /* switch to SRAM Page 0 (for safety) */ + wl3501_switch_page(this, WL3501_BSS_SPAGE0); + + /* The MAC addr should be 00:60:... */ + return this->mac_addr[0] == 0x00 && this->mac_addr[1] == 0x60; +} + +/** + * wl3501_set_to_wla - Move 'size' bytes from PC to card + * @dest: Card addressing space + * @src: PC addressing space + * @size: Bytes to move + * + * Move 'size' bytes from PC to card. (Shouldn't be interrupted) + */ +void wl3501_set_to_wla(struct wl3501_card *this, u16 dest, void *src, int size) +{ + /* switch to SRAM Page 0 */ + wl3501_switch_page(this, (dest & 0x8000) ? WL3501_BSS_SPAGE1 : + WL3501_BSS_SPAGE0); + /* set LMAL and LMAH */ + wl3501_outb(dest & 0xff, this->base_addr + WL3501_NIC_LMAL); + wl3501_outb(((dest >> 8) & 0x7f), this->base_addr + WL3501_NIC_LMAH); + + /* rep out to Port A */ + wl3501_outsb(this->base_addr + WL3501_NIC_IODPA, src, size); +} + +/** + * wl3501_get_from_wla - Move 'size' bytes from card to PC + * @src: Card addressing space + * @dest: PC addressing space + * @size: Bytes to move + * + * Move 'size' bytes from card to PC. (Shouldn't be interrupted) + */ +void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest, + int size) +{ + /* switch to SRAM Page 0 */ + wl3501_switch_page(this, (src & 0x8000) ? WL3501_BSS_SPAGE1 : + WL3501_BSS_SPAGE0); + /* set LMAL and LMAH */ + wl3501_outb(src & 0xff, this->base_addr + WL3501_NIC_LMAL); + wl3501_outb((src >> 8) & 0x7f, this->base_addr + WL3501_NIC_LMAH); + + /* rep get from Port A */ + insb(this->base_addr + WL3501_NIC_IODPA, dest, size); +} + +/* + * Get/Allocate a free Tx Data Buffer + * + * *--------------*-----------------*----------------------------------* + * | PLCP | MAC Header | DST SRC Data ... | + * | (24 bytes) | (30 bytes) | (6) (6) (Ethernet Row Data) | + * *--------------*-----------------*----------------------------------* + * \ \- IEEE 802.11 -/ \-------------- len --------------/ + * \-struct wl3501_80211_tx_hdr--/ \-------- Ethernet Frame -------/ + * + * Return = Postion in Card + */ +static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len) +{ + u16 next, blk_cnt = 0, zero = 0; + u16 full_len = sizeof(struct wl3501_80211_tx_hdr) + len; + u16 ret = 0; + + if (full_len > this->tx_buffer_cnt * 254) + goto out; + ret = this->tx_buffer_head; + while (full_len) { + if (full_len < 254) + full_len = 0; + else + full_len -= 254; + wl3501_get_from_wla(this, this->tx_buffer_head, &next, + sizeof(next)); + if (!full_len) + wl3501_set_to_wla(this, this->tx_buffer_head, &zero, + sizeof(zero)); + this->tx_buffer_head = next; + blk_cnt++; + /* if buffer is not enough */ + if (!next && full_len) { + this->tx_buffer_head = ret; + ret = 0; + goto out; + } + } + this->tx_buffer_cnt -= blk_cnt; +out: + return ret; +} + +/* + * Free an allocated Tx Buffer. ptr must be correct position. + */ +static void wl3501_free_tx_buffer(struct wl3501_card *this, u16 ptr) +{ + /* check if all space is not free */ + if (!this->tx_buffer_head) + this->tx_buffer_head = ptr; + else + wl3501_set_to_wla(this, this->tx_buffer_tail, + &ptr, sizeof(ptr)); + while (ptr) { + u16 next; + + this->tx_buffer_cnt++; + wl3501_get_from_wla(this, ptr, &next, sizeof(next)); + this->tx_buffer_tail = ptr; + ptr = next; + } +} + +static int wl3501_esbq_req_test(struct wl3501_card *this) +{ + u8 tmp; + + wl3501_get_from_wla(this, this->esbq_req_head + 3, &tmp, sizeof(tmp)); + return tmp & 0x80; +} + +static void wl3501_esbq_req(struct wl3501_card *this, u16 *ptr) +{ + u16 tmp = 0; + + wl3501_set_to_wla(this, this->esbq_req_head, ptr, 2); + wl3501_set_to_wla(this, this->esbq_req_head + 2, &tmp, sizeof(tmp)); + this->esbq_req_head += 4; + if (this->esbq_req_head >= this->esbq_req_end) + this->esbq_req_head = this->esbq_req_start; +} + +static int wl3501_esbq_exec(struct wl3501_card *this, void *sig, int sig_size) +{ + int rc = -EIO; + + if (wl3501_esbq_req_test(this)) { + u16 ptr = wl3501_get_tx_buffer(this, sig_size); + if (ptr) { + wl3501_set_to_wla(this, ptr, sig, sig_size); + wl3501_esbq_req(this, &ptr); + rc = 0; + } + } + return rc; +} + +static int wl3501_get_mib_value(struct wl3501_card *this, u8 index, + void *bf, int size) +{ + struct wl3501_get_req sig = { + .sig_id = WL3501_SIG_GET_REQ, + .mib_attrib = index, + }; + unsigned long flags; + int rc = -EIO; + + spin_lock_irqsave(&this->lock, flags); + if (wl3501_esbq_req_test(this)) { + u16 ptr = wl3501_get_tx_buffer(this, sizeof(sig)); + if (ptr) { + wl3501_set_to_wla(this, ptr, &sig, sizeof(sig)); + wl3501_esbq_req(this, &ptr); + this->sig_get_confirm.mib_status = 255; + spin_unlock_irqrestore(&this->lock, flags); + rc = wait_event_interruptible(this->wait, + this->sig_get_confirm.mib_status != 255); + if (!rc) + memcpy(bf, this->sig_get_confirm.mib_value, + size); + goto out; + } + } + spin_unlock_irqrestore(&this->lock, flags); +out: + return rc; +} + +static int wl3501_pwr_mgmt(struct wl3501_card *this, int suspend) +{ + struct wl3501_pwr_mgmt_req sig = { + .sig_id = WL3501_SIG_PWR_MGMT_REQ, + .pwr_save = suspend, + .wake_up = !suspend, + .receive_dtims = 10, + }; + unsigned long flags; + int rc = -EIO; + + spin_lock_irqsave(&this->lock, flags); + if (wl3501_esbq_req_test(this)) { + u16 ptr = wl3501_get_tx_buffer(this, sizeof(sig)); + if (ptr) { + wl3501_set_to_wla(this, ptr, &sig, sizeof(sig)); + wl3501_esbq_req(this, &ptr); + this->sig_pwr_mgmt_confirm.status = 255; + spin_unlock_irqrestore(&this->lock, flags); + rc = wait_event_interruptible(this->wait, + this->sig_pwr_mgmt_confirm.status != 255); + printk(KERN_INFO "%s: %s status=%d\n", __FUNCTION__, + suspend ? "suspend" : "resume", + this->sig_pwr_mgmt_confirm.status); + goto out; + } + } + spin_unlock_irqrestore(&this->lock, flags); +out: + return rc; +} + +/** + * wl3501_send_pkt - Send a packet. + * @this - card + * + * Send a packet. + * + * data = Ethernet raw frame. (e.g. data[0] - data[5] is Dest MAC Addr, + * data[6] - data[11] is Src MAC Addr) + * Ref: IEEE 802.11 + */ +static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len) +{ + u16 bf, sig_bf, next, tmplen, pktlen; + struct wl3501_md_req sig = { + .sig_id = WL3501_SIG_MD_REQ, + }; + u8 *pdata = (char *)data; + int rc = -EIO; + + if (wl3501_esbq_req_test(this)) { + sig_bf = wl3501_get_tx_buffer(this, sizeof(sig)); + rc = -ENOMEM; + if (!sig_bf) /* No free buffer available */ + goto out; + bf = wl3501_get_tx_buffer(this, len + 26 + 24); + if (!bf) { + /* No free buffer available */ + wl3501_free_tx_buffer(this, sig_bf); + goto out; + } + rc = 0; + memcpy(&sig.daddr[0], pdata, 12); + pktlen = len - 12; + pdata += 12; + sig.data = bf; + if (((*pdata) * 256 + (*(pdata + 1))) > 1500) { + u8 addr4[ETH_ALEN] = { + [0] = 0xAA, [1] = 0xAA, [2] = 0x03, [4] = 0x00, + }; + + wl3501_set_to_wla(this, bf + 2 + + offsetof(struct wl3501_tx_hdr, addr4), + addr4, sizeof(addr4)); + sig.size = pktlen + 24 + 4 + 6; + if (pktlen > (254 - sizeof(struct wl3501_tx_hdr))) { + tmplen = 254 - sizeof(struct wl3501_tx_hdr); + pktlen -= tmplen; + } else { + tmplen = pktlen; + pktlen = 0; + } + wl3501_set_to_wla(this, + bf + 2 + sizeof(struct wl3501_tx_hdr), + pdata, tmplen); + pdata += tmplen; + wl3501_get_from_wla(this, bf, &next, sizeof(next)); + bf = next; + } else { + sig.size = pktlen + 24 + 4 - 2; + pdata += 2; + pktlen -= 2; + if (pktlen > (254 - sizeof(struct wl3501_tx_hdr) + 6)) { + tmplen = 254 - sizeof(struct wl3501_tx_hdr) + 6; + pktlen -= tmplen; + } else { + tmplen = pktlen; + pktlen = 0; + } + wl3501_set_to_wla(this, bf + 2 + + offsetof(struct wl3501_tx_hdr, addr4), + pdata, tmplen); + pdata += tmplen; + wl3501_get_from_wla(this, bf, &next, sizeof(next)); + bf = next; + } + while (pktlen > 0) { + if (pktlen > 254) { + tmplen = 254; + pktlen -= 254; + } else { + tmplen = pktlen; + pktlen = 0; + } + wl3501_set_to_wla(this, bf + 2, pdata, tmplen); + pdata += tmplen; + wl3501_get_from_wla(this, bf, &next, sizeof(next)); + bf = next; + } + wl3501_set_to_wla(this, sig_bf, &sig, sizeof(sig)); + wl3501_esbq_req(this, &sig_bf); + } +out: + return rc; +} + +static int wl3501_mgmt_resync(struct wl3501_card *this) +{ + struct wl3501_resync_req sig = { + .sig_id = WL3501_SIG_RESYNC_REQ, + }; + + return wl3501_esbq_exec(this, &sig, sizeof(sig)); +} + +static inline int wl3501_fw_bss_type(struct wl3501_card *this) +{ + return this->net_type == IW_MODE_INFRA ? WL3501_NET_TYPE_INFRA : + WL3501_NET_TYPE_ADHOC; +} + +static inline int wl3501_fw_cap_info(struct wl3501_card *this) +{ + return this->net_type == IW_MODE_INFRA ? WL3501_MGMT_CAPABILITY_ESS : + WL3501_MGMT_CAPABILITY_IBSS; +} + +static int wl3501_mgmt_scan(struct wl3501_card *this, u16 chan_time) +{ + struct wl3501_scan_req sig = { + .sig_id = WL3501_SIG_SCAN_REQ, + .scan_type = WL3501_SCAN_TYPE_ACTIVE, + .probe_delay = 0x10, + .min_chan_time = chan_time, + .max_chan_time = chan_time, + .bss_type = wl3501_fw_bss_type(this), + }; + + this->bss_cnt = this->join_sta_bss = 0; + return wl3501_esbq_exec(this, &sig, sizeof(sig)); +} + +static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas) +{ + struct wl3501_join_req sig = { + .sig_id = WL3501_SIG_JOIN_REQ, + .timeout = 10, + .ds_pset = { + .el = { + .id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET, + .len = 1, + }, + .chan = this->chan, + }, + }; + + memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72); + return wl3501_esbq_exec(this, &sig, sizeof(sig)); +} + +static int wl3501_mgmt_start(struct wl3501_card *this) +{ + struct wl3501_start_req sig = { + .sig_id = WL3501_SIG_START_REQ, + .beacon_period = 400, + .dtim_period = 1, + .ds_pset = { + .el = { + .id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET, + .len = 1, + }, + .chan = this->chan, + }, + .bss_basic_rset = { + .el = { + .id = IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES, + .len = 2, + }, + .data_rate_labels = { + [0] = IW_MGMT_RATE_LABEL_MANDATORY | + IW_MGMT_RATE_LABEL_1MBIT, + [1] = IW_MGMT_RATE_LABEL_MANDATORY | + IW_MGMT_RATE_LABEL_2MBIT, + }, + }, + .operational_rset = { + .el = { + .id = IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES, + .len = 2, + }, + .data_rate_labels = { + [0] = IW_MGMT_RATE_LABEL_MANDATORY | + IW_MGMT_RATE_LABEL_1MBIT, + [1] = IW_MGMT_RATE_LABEL_MANDATORY | + IW_MGMT_RATE_LABEL_2MBIT, + }, + }, + .ibss_pset = { + .el = { + .id = IW_MGMT_INFO_ELEMENT_IBSS_PARAMETER_SET, + .len = 2, + }, + .atim_window = 10, + }, + .bss_type = wl3501_fw_bss_type(this), + .cap_info = wl3501_fw_cap_info(this), + }; + + iw_copy_mgmt_info_element(&sig.ssid.el, &this->essid.el); + iw_copy_mgmt_info_element(&this->keep_essid.el, &this->essid.el); + return wl3501_esbq_exec(this, &sig, sizeof(sig)); +} + +static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) +{ + u16 i = 0; + int matchflag = 0; + struct wl3501_scan_confirm sig; + + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + if (sig.status == WL3501_STATUS_SUCCESS) { + dprintk(3, "success"); + if ((this->net_type == IW_MODE_INFRA && + (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) || + (this->net_type == IW_MODE_ADHOC && + (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) || + this->net_type == IW_MODE_AUTO) { + if (!this->essid.el.len) + matchflag = 1; + else if (this->essid.el.len == 3 && + !memcmp(this->essid.essid, "ANY", 3)) + matchflag = 1; + else if (this->essid.el.len != sig.ssid.el.len) + matchflag = 0; + else if (memcmp(this->essid.essid, sig.ssid.essid, + this->essid.el.len)) + matchflag = 0; + else + matchflag = 1; + if (matchflag) { + for (i = 0; i < this->bss_cnt; i++) { + if (!memcmp(this->bss_set[i].bssid, + sig.bssid, ETH_ALEN)) { + matchflag = 0; + break; + } + } + } + if (matchflag && (i < 20)) { + memcpy(&this->bss_set[i].beacon_period, + &sig.beacon_period, 73); + this->bss_cnt++; + this->rssi = sig.rssi; + } + } + } else if (sig.status == WL3501_STATUS_TIMEOUT) { + dprintk(3, "timeout"); + this->join_sta_bss = 0; + for (i = this->join_sta_bss; i < this->bss_cnt; i++) + if (!wl3501_mgmt_join(this, i)) + break; + this->join_sta_bss = i; + if (this->join_sta_bss == this->bss_cnt) { + if (this->net_type == IW_MODE_INFRA) + wl3501_mgmt_scan(this, 100); + else { + this->adhoc_times++; + if (this->adhoc_times > WL3501_MAX_ADHOC_TRIES) + wl3501_mgmt_start(this); + else + wl3501_mgmt_scan(this, 100); + } + } + } +} + +/** + * wl3501_block_interrupt - Mask interrupt from SUTRO + * @this - card + * + * Mask interrupt from SUTRO. (i.e. SUTRO cannot interrupt the HOST) + * Return: 1 if interrupt is originally enabled + */ +static int wl3501_block_interrupt(struct wl3501_card *this) +{ + u8 old = inb(this->base_addr + WL3501_NIC_GCR); + u8 new = old & (~(WL3501_GCR_ECINT | WL3501_GCR_INT2EC | + WL3501_GCR_ENECINT)); + + wl3501_outb(new, this->base_addr + WL3501_NIC_GCR); + return old & WL3501_GCR_ENECINT; +} + +/** + * wl3501_unblock_interrupt - Enable interrupt from SUTRO + * @this - card + * + * Enable interrupt from SUTRO. (i.e. SUTRO can interrupt the HOST) + * Return: 1 if interrupt is originally enabled + */ +static int wl3501_unblock_interrupt(struct wl3501_card *this) +{ + u8 old = inb(this->base_addr + WL3501_NIC_GCR); + u8 new = (old & ~(WL3501_GCR_ECINT | WL3501_GCR_INT2EC)) | + WL3501_GCR_ENECINT; + + wl3501_outb(new, this->base_addr + WL3501_NIC_GCR); + return old & WL3501_GCR_ENECINT; +} + +/** + * wl3501_receive - Receive data from Receive Queue. + * + * Receive data from Receive Queue. + * + * @this: card + * @bf: address of host + * @size: size of buffer. + */ +static u16 wl3501_receive(struct wl3501_card *this, u8 *bf, u16 size) +{ + u16 next_addr, next_addr1; + u8 *data = bf + 12; + + size -= 12; + wl3501_get_from_wla(this, this->start_seg + 2, + &next_addr, sizeof(next_addr)); + if (size > WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr)) { + wl3501_get_from_wla(this, + this->start_seg + + sizeof(struct wl3501_rx_hdr), data, + WL3501_BLKSZ - + sizeof(struct wl3501_rx_hdr)); + size -= WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr); + data += WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr); + } else { + wl3501_get_from_wla(this, + this->start_seg + + sizeof(struct wl3501_rx_hdr), + data, size); + size = 0; + } + while (size > 0) { + if (size > WL3501_BLKSZ - 5) { + wl3501_get_from_wla(this, next_addr + 5, data, + WL3501_BLKSZ - 5); + size -= WL3501_BLKSZ - 5; + data += WL3501_BLKSZ - 5; + wl3501_get_from_wla(this, next_addr + 2, &next_addr1, + sizeof(next_addr1)); + next_addr = next_addr1; + } else { + wl3501_get_from_wla(this, next_addr + 5, data, size); + size = 0; + } + } + return 0; +} + +static void wl3501_esbq_req_free(struct wl3501_card *this) +{ + u8 tmp; + u16 addr; + + if (this->esbq_req_head == this->esbq_req_tail) + goto out; + wl3501_get_from_wla(this, this->esbq_req_tail + 3, &tmp, sizeof(tmp)); + if (!(tmp & 0x80)) + goto out; + wl3501_get_from_wla(this, this->esbq_req_tail, &addr, sizeof(addr)); + wl3501_free_tx_buffer(this, addr); + this->esbq_req_tail += 4; + if (this->esbq_req_tail >= this->esbq_req_end) + this->esbq_req_tail = this->esbq_req_start; +out: + return; +} + +static int wl3501_esbq_confirm(struct wl3501_card *this) +{ + u8 tmp; + + wl3501_get_from_wla(this, this->esbq_confirm + 3, &tmp, sizeof(tmp)); + return tmp & 0x80; +} + +static void wl3501_online(struct net_device *dev) +{ + struct wl3501_card *this = dev->priv; + + printk(KERN_INFO "%s: Wireless LAN online. BSSID: " + "%02X %02X %02X %02X %02X %02X\n", dev->name, + this->bssid[0], this->bssid[1], this->bssid[2], + this->bssid[3], this->bssid[4], this->bssid[5]); + netif_wake_queue(dev); +} + +static void wl3501_esbq_confirm_done(struct wl3501_card *this) +{ + u8 tmp = 0; + + wl3501_set_to_wla(this, this->esbq_confirm + 3, &tmp, sizeof(tmp)); + this->esbq_confirm += 4; + if (this->esbq_confirm >= this->esbq_confirm_end) + this->esbq_confirm = this->esbq_confirm_start; +} + +static int wl3501_mgmt_auth(struct wl3501_card *this) +{ + struct wl3501_auth_req sig = { + .sig_id = WL3501_SIG_AUTH_REQ, + .type = WL3501_SYS_TYPE_OPEN, + .timeout = 1000, + }; + + dprintk(3, "entry"); + memcpy(sig.mac_addr, this->bssid, ETH_ALEN); + return wl3501_esbq_exec(this, &sig, sizeof(sig)); +} + +static int wl3501_mgmt_association(struct wl3501_card *this) +{ + struct wl3501_assoc_req sig = { + .sig_id = WL3501_SIG_ASSOC_REQ, + .timeout = 1000, + .listen_interval = 5, + .cap_info = this->cap_info, + }; + + dprintk(3, "entry"); + memcpy(sig.mac_addr, this->bssid, ETH_ALEN); + return wl3501_esbq_exec(this, &sig, sizeof(sig)); +} + +static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr) +{ + struct wl3501_card *this = dev->priv; + struct wl3501_join_confirm sig; + + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + if (sig.status == WL3501_STATUS_SUCCESS) { + if (this->net_type == IW_MODE_INFRA) { + if (this->join_sta_bss < this->bss_cnt) { + const int i = this->join_sta_bss; + memcpy(this->bssid, + this->bss_set[i].bssid, ETH_ALEN); + this->chan = this->bss_set[i].ds_pset.chan; + iw_copy_mgmt_info_element(&this->keep_essid.el, + &this->bss_set[i].ssid.el); + wl3501_mgmt_auth(this); + } + } else { + const int i = this->join_sta_bss; + + memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN); + this->chan = this->bss_set[i].ds_pset.chan; + iw_copy_mgmt_info_element(&this->keep_essid.el, + &this->bss_set[i].ssid.el); + wl3501_online(dev); + } + } else { + int i; + this->join_sta_bss++; + for (i = this->join_sta_bss; i < this->bss_cnt; i++) + if (!wl3501_mgmt_join(this, i)) + break; + this->join_sta_bss = i; + if (this->join_sta_bss == this->bss_cnt) { + if (this->net_type == IW_MODE_INFRA) + wl3501_mgmt_scan(this, 100); + else { + this->adhoc_times++; + if (this->adhoc_times > WL3501_MAX_ADHOC_TRIES) + wl3501_mgmt_start(this); + else + wl3501_mgmt_scan(this, 100); + } + } + } +} + +static inline void wl3501_alarm_interrupt(struct net_device *dev, + struct wl3501_card *this) +{ + if (this->net_type == IW_MODE_INFRA) { + printk(KERN_INFO "Wireless LAN offline\n"); + netif_stop_queue(dev); + wl3501_mgmt_resync(this); + } +} + +static inline void wl3501_md_confirm_interrupt(struct net_device *dev, + struct wl3501_card *this, + u16 addr) +{ + struct wl3501_md_confirm sig; + + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + wl3501_free_tx_buffer(this, sig.data); + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); +} + +static inline void wl3501_md_ind_interrupt(struct net_device *dev, + struct wl3501_card *this, u16 addr) +{ + struct wl3501_md_ind sig; + struct sk_buff *skb; + u8 rssi, addr4[ETH_ALEN]; + u16 pkt_len; + + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + this->start_seg = sig.data; + wl3501_get_from_wla(this, + sig.data + offsetof(struct wl3501_rx_hdr, rssi), + &rssi, sizeof(rssi)); + this->rssi = rssi <= 63 ? (rssi * 100) / 64 : 255; + + wl3501_get_from_wla(this, + sig.data + + offsetof(struct wl3501_rx_hdr, addr4), + &addr4, sizeof(addr4)); + if (!(addr4[0] == 0xAA && addr4[1] == 0xAA && + addr4[2] == 0x03 && addr4[4] == 0x00)) { + printk(KERN_INFO "Insupported packet type!\n"); + return; + } + pkt_len = sig.size + 12 - 24 - 4 - 6; + + skb = dev_alloc_skb(pkt_len + 5); + + if (!skb) { + printk(KERN_WARNING "%s: Can't alloc a sk_buff of size %d.\n", + dev->name, pkt_len); + this->stats.rx_dropped++; + } else { + skb->dev = dev; + skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */ + eth_copy_and_sum(skb, (unsigned char *)&sig.daddr, 12, 0); + wl3501_receive(this, skb->data, pkt_len); + skb_put(skb, pkt_len); + skb->protocol = eth_type_trans(skb, dev); + dev->last_rx = jiffies; + this->stats.rx_packets++; + this->stats.rx_bytes += skb->len; + netif_rx(skb); + } +} + +static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this, + u16 addr, void *sig, int size) +{ + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &this->sig_get_confirm, + sizeof(this->sig_get_confirm)); + wake_up(&this->wait); +} + +static inline void wl3501_start_confirm_interrupt(struct net_device *dev, + struct wl3501_card *this, + u16 addr) +{ + struct wl3501_start_confirm sig; + + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + if (sig.status == WL3501_STATUS_SUCCESS) + netif_wake_queue(dev); +} + +static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev, + u16 addr) +{ + struct wl3501_card *this = dev->priv; + struct wl3501_assoc_confirm sig; + + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + + if (sig.status == WL3501_STATUS_SUCCESS) + wl3501_online(dev); +} + +static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this, + u16 addr) +{ + struct wl3501_auth_confirm sig; + + dprintk(3, "entry"); + wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); + + if (sig.status == WL3501_STATUS_SUCCESS) + wl3501_mgmt_association(this); + else + wl3501_mgmt_resync(this); +} + +static inline void wl3501_rx_interrupt(struct net_device *dev) +{ + int morepkts; + u16 addr; + u8 sig_id; + struct wl3501_card *this = dev->priv; + + dprintk(3, "entry"); +loop: + morepkts = 0; + if (!wl3501_esbq_confirm(this)) + goto free; + wl3501_get_from_wla(this, this->esbq_confirm, &addr, sizeof(addr)); + wl3501_get_from_wla(this, addr + 2, &sig_id, sizeof(sig_id)); + + switch (sig_id) { + case WL3501_SIG_DEAUTH_IND: + case WL3501_SIG_DISASSOC_IND: + case WL3501_SIG_ALARM: + wl3501_alarm_interrupt(dev, this); + break; + case WL3501_SIG_MD_CONFIRM: + wl3501_md_confirm_interrupt(dev, this, addr); + break; + case WL3501_SIG_MD_IND: + wl3501_md_ind_interrupt(dev, this, addr); + break; + case WL3501_SIG_GET_CONFIRM: + wl3501_get_confirm_interrupt(this, addr, + &this->sig_get_confirm, + sizeof(this->sig_get_confirm)); + break; + case WL3501_SIG_PWR_MGMT_CONFIRM: + wl3501_get_confirm_interrupt(this, addr, + &this->sig_pwr_mgmt_confirm, + sizeof(this->sig_pwr_mgmt_confirm)); + break; + case WL3501_SIG_START_CONFIRM: + wl3501_start_confirm_interrupt(dev, this, addr); + break; + case WL3501_SIG_SCAN_CONFIRM: + wl3501_mgmt_scan_confirm(this, addr); + break; + case WL3501_SIG_JOIN_CONFIRM: + wl3501_mgmt_join_confirm(dev, addr); + break; + case WL3501_SIG_ASSOC_CONFIRM: + wl3501_assoc_confirm_interrupt(dev, addr); + break; + case WL3501_SIG_AUTH_CONFIRM: + wl3501_auth_confirm_interrupt(this, addr); + break; + case WL3501_SIG_RESYNC_CONFIRM: + wl3501_mgmt_resync(this); /* FIXME: should be resync_confirm */ + break; + } + wl3501_esbq_confirm_done(this); + morepkts = 1; + /* free request if necessary */ +free: + wl3501_esbq_req_free(this); + if (morepkts) + goto loop; +} + +static inline void wl3501_ack_interrupt(struct wl3501_card *this) +{ + wl3501_outb(WL3501_GCR_ECINT, this->base_addr + WL3501_NIC_GCR); +} + +/** + * wl3501_interrupt - Hardware interrupt from card. + * @irq - Interrupt number + * @dev_id - net_device + * @regs - registers + * + * We must acknowledge the interrupt as soon as possible, and block the + * interrupt from the same card immediately to prevent re-entry. + * + * Before accessing the Control_Status_Block, we must lock SUTRO first. + * On the other hand, to prevent SUTRO from malfunctioning, we must + * unlock the SUTRO as soon as possible. + */ +static irqreturn_t wl3501_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct wl3501_card *this; + int handled = 1; + + if (!dev) + goto unknown; + this = dev->priv; + spin_lock(&this->lock); + wl3501_ack_interrupt(this); + wl3501_block_interrupt(this); + wl3501_rx_interrupt(dev); + wl3501_unblock_interrupt(this); + spin_unlock(&this->lock); +out: + return IRQ_RETVAL(handled); +unknown: + handled = 0; + printk(KERN_ERR "%s: irq %d for unknown device.\n", __FUNCTION__, irq); + goto out; +} + +static int wl3501_reset_board(struct wl3501_card *this) +{ + u8 tmp = 0; + int i, rc = 0; + + /* Coreset */ + wl3501_outb_p(WL3501_GCR_CORESET, this->base_addr + WL3501_NIC_GCR); + wl3501_outb_p(0, this->base_addr + WL3501_NIC_GCR); + wl3501_outb_p(WL3501_GCR_CORESET, this->base_addr + WL3501_NIC_GCR); + + /* Reset SRAM 0x480 to zero */ + wl3501_set_to_wla(this, 0x480, &tmp, sizeof(tmp)); + + /* Start up */ + wl3501_outb_p(0, this->base_addr + WL3501_NIC_GCR); + + WL3501_NOPLOOP(1024 * 50); + + wl3501_unblock_interrupt(this); /* acme: was commented */ + + /* Polling Self_Test_Status */ + for (i = 0; i < 10000; i++) { + wl3501_get_from_wla(this, 0x480, &tmp, sizeof(tmp)); + + if (tmp == 'W') { + /* firmware complete all test successfully */ + tmp = 'A'; + wl3501_set_to_wla(this, 0x480, &tmp, sizeof(tmp)); + goto out; + } + WL3501_NOPLOOP(10); + } + printk(KERN_WARNING "%s: failed to reset the board!\n", __FUNCTION__); + rc = -ENODEV; +out: + return rc; +} + +static int wl3501_init_firmware(struct wl3501_card *this) +{ + u16 ptr, next; + int rc = wl3501_reset_board(this); + + if (rc) + goto fail; + this->card_name[0] = '\0'; + wl3501_get_from_wla(this, 0x1a00, + this->card_name, sizeof(this->card_name)); + this->card_name[sizeof(this->card_name) - 1] = '\0'; + this->firmware_date[0] = '\0'; + wl3501_get_from_wla(this, 0x1a40, + this->firmware_date, sizeof(this->firmware_date)); + this->firmware_date[sizeof(this->firmware_date) - 1] = '\0'; + /* Switch to SRAM Page 0 */ + wl3501_switch_page(this, WL3501_BSS_SPAGE0); + /* Read parameter from card */ + wl3501_get_from_wla(this, 0x482, &this->esbq_req_start, 2); + wl3501_get_from_wla(this, 0x486, &this->esbq_req_end, 2); + wl3501_get_from_wla(this, 0x488, &this->esbq_confirm_start, 2); + wl3501_get_from_wla(this, 0x48c, &this->esbq_confirm_end, 2); + wl3501_get_from_wla(this, 0x48e, &this->tx_buffer_head, 2); + wl3501_get_from_wla(this, 0x492, &this->tx_buffer_size, 2); + this->esbq_req_tail = this->esbq_req_head = this->esbq_req_start; + this->esbq_req_end += this->esbq_req_start; + this->esbq_confirm = this->esbq_confirm_start; + this->esbq_confirm_end += this->esbq_confirm_start; + /* Initial Tx Buffer */ + this->tx_buffer_cnt = 1; + ptr = this->tx_buffer_head; + next = ptr + WL3501_BLKSZ; + while ((next - this->tx_buffer_head) < this->tx_buffer_size) { + this->tx_buffer_cnt++; + wl3501_set_to_wla(this, ptr, &next, sizeof(next)); + ptr = next; + next = ptr + WL3501_BLKSZ; + } + rc = 0; + next = 0; + wl3501_set_to_wla(this, ptr, &next, sizeof(next)); + this->tx_buffer_tail = ptr; +out: + return rc; +fail: + printk(KERN_WARNING "%s: failed!\n", __FUNCTION__); + goto out; +} + +static int wl3501_close(struct net_device *dev) +{ + struct wl3501_card *this = dev->priv; + int rc = -ENODEV; + unsigned long flags; + dev_link_t *link; + + spin_lock_irqsave(&this->lock, flags); + /* Check if the device is in wl3501_dev_list */ + for (link = wl3501_dev_list; link; link = link->next) + if (link->priv == dev) + break; + if (!link) + goto out; + link->open--; + + /* Stop wl3501_hard_start_xmit() from now on */ + netif_stop_queue(dev); + wl3501_ack_interrupt(this); + + /* Mask interrupts from the SUTRO */ + wl3501_block_interrupt(this); + + rc = 0; + printk(KERN_INFO "%s: WL3501 closed\n", dev->name); +out: + spin_unlock_irqrestore(&this->lock, flags); + return rc; +} + +/** + * wl3501_reset - Reset the SUTRO. + * @dev - network device + * + * It is almost the same as wl3501_open(). In fact, we may just wl3501_close() + * and wl3501_open() again, but I wouldn't like to free_irq() when the driver + * is running. It seems to be dangerous. + */ +static int wl3501_reset(struct net_device *dev) +{ + struct wl3501_card *this = dev->priv; + int rc = -ENODEV; + + wl3501_block_interrupt(this); + + if (wl3501_init_firmware(this)) { + printk(KERN_WARNING "%s: Can't initialize Firmware!\n", + dev->name); + /* Free IRQ, and mark IRQ as unused */ + free_irq(dev->irq, dev); + goto out; + } + + /* + * Queue has to be started only when the Card is Started + */ + netif_stop_queue(dev); + this->adhoc_times = 0; + wl3501_ack_interrupt(this); + wl3501_unblock_interrupt(this); + wl3501_mgmt_scan(this, 100); + dprintk(1, "%s: device reset", dev->name); + rc = 0; +out: + return rc; +} + +static void wl3501_tx_timeout(struct net_device *dev) +{ + struct wl3501_card *this = dev->priv; + struct net_device_stats *stats = &this->stats; + unsigned long flags; + int rc; + + stats->tx_errors++; + spin_lock_irqsave(&this->lock, flags); + rc = wl3501_reset(dev); + spin_unlock_irqrestore(&this->lock, flags); + if (rc) + printk(KERN_ERR "%s: Error %d resetting card on Tx timeout!\n", + dev->name, rc); + else { + dev->trans_start = jiffies; + netif_wake_queue(dev); + } +} + +/* + * Return : 0 - OK + * 1 - Could not transmit (dev_queue_xmit will queue it) + * and try to sent it later + */ +static int wl3501_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + int enabled, rc; + struct wl3501_card *this = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&this->lock, flags); + enabled = wl3501_block_interrupt(this); + dev->trans_start = jiffies; + rc = wl3501_send_pkt(this, skb->data, skb->len); + if (enabled) + wl3501_unblock_interrupt(this); + if (rc) { + ++this->stats.tx_dropped; + netif_stop_queue(dev); + } else { + ++this->stats.tx_packets; + this->stats.tx_bytes += skb->len; + kfree_skb(skb); + + if (this->tx_buffer_cnt < 2) + netif_stop_queue(dev); + } + spin_unlock_irqrestore(&this->lock, flags); + return rc; +} + +static int wl3501_open(struct net_device *dev) +{ + int rc = -ENODEV; + struct wl3501_card *this = dev->priv; + unsigned long flags; + dev_link_t *link; + + spin_lock_irqsave(&this->lock, flags); + /* Check if the device is in wl3501_dev_list */ + for (link = wl3501_dev_list; link; link = link->next) + if (link->priv == dev) + break; + if (!DEV_OK(link)) + goto out; + netif_device_attach(dev); + link->open++; + + /* Initial WL3501 firmware */ + dprintk(1, "%s: Initialize WL3501 firmware...", dev->name); + if (wl3501_init_firmware(this)) + goto fail; + /* Initial device variables */ + this->adhoc_times = 0; + /* Acknowledge Interrupt, for cleaning last state */ + wl3501_ack_interrupt(this); + + /* Enable interrupt from card after all */ + wl3501_unblock_interrupt(this); + wl3501_mgmt_scan(this, 100); + rc = 0; + dprintk(1, "%s: WL3501 opened", dev->name); + printk(KERN_INFO "%s: Card Name: %s\n" + "%s: Firmware Date: %s\n", + dev->name, this->card_name, + dev->name, this->firmware_date); +out: + spin_unlock_irqrestore(&this->lock, flags); + return rc; +fail: + printk(KERN_WARNING "%s: Can't initialize firmware!\n", dev->name); + goto out; +} + +struct net_device_stats *wl3501_get_stats(struct net_device *dev) +{ + struct wl3501_card *this = dev->priv; + + return &this->stats; +} + +struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev) +{ + struct wl3501_card *this = dev->priv; + struct iw_statistics *wstats = &this->wstats; + u32 value; /* size checked: it is u32 */ + + memset(wstats, 0, sizeof(*wstats)); + wstats->status = netif_running(dev); + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_ICV_ERROR_COUNT, + &value, sizeof(value))) + wstats->discard.code += value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_UNDECRYPTABLE_COUNT, + &value, sizeof(value))) + wstats->discard.code += value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_EXCLUDED_COUNT, + &value, sizeof(value))) + wstats->discard.code += value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_RETRY_COUNT, + &value, sizeof(value))) + wstats->discard.retries = value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_FAILED_COUNT, + &value, sizeof(value))) + wstats->discard.misc += value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_RTS_FAILURE_COUNT, + &value, sizeof(value))) + wstats->discard.misc += value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_ACK_FAILURE_COUNT, + &value, sizeof(value))) + wstats->discard.misc += value; + if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_FRAME_DUPLICATE_COUNT, + &value, sizeof(value))) + wstats->discard.misc += value; + return wstats; +} + +static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver)); +} + +static struct ethtool_ops ops = { + .get_drvinfo = wl3501_get_drvinfo +}; + +/** + * wl3501_detach - deletes a driver "instance" + * @link - FILL_IN + * + * This deletes a driver "instance". The device is de-registered with Card + * Services. If it has been released, all local data structures are freed. + * Otherwise, the structures will be freed when the device is released. + */ +static void wl3501_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + /* Locate device structure */ + for (linkp = &wl3501_dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) + break; + if (!*linkp) + goto out; + + /* If the device is currently configured and active, we won't actually + * delete it yet. Instead, it is marked so that when the release() + * function is called, that will trigger a proper detach(). */ + + if (link->state & DEV_CONFIG) { +#ifdef PCMCIA_DEBUG + printk(KERN_DEBUG "wl3501_cs: detach postponed, '%s' " + "still locked\n", link->dev->dev_name); +#endif + goto out; + } + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, free pieces */ + *linkp = link->next; + + if (link->priv) + free_netdev(link->priv); + kfree(link); +out: + return; +} + +static int wl3501_get_name(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + strlcpy(wrqu->name, "IEEE 802.11-DS", sizeof(wrqu->name)); + return 0; +} + +static int wl3501_set_freq(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + int channel = wrqu->freq.m; + int rc = -EINVAL; + + if (iw_valid_channel(this->reg_domain, channel)) { + this->chan = channel; + rc = wl3501_reset(dev); + } + return rc; +} + +static int wl3501_get_freq(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + wrqu->freq.m = wl3501_chan2freq[this->chan - 1] * 100000; + wrqu->freq.e = 1; + return 0; +} + +static int wl3501_set_mode(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + int rc = -EINVAL; + + if (wrqu->mode == IW_MODE_INFRA || + wrqu->mode == IW_MODE_ADHOC || + wrqu->mode == IW_MODE_AUTO) { + struct wl3501_card *this = dev->priv; + + this->net_type = wrqu->mode; + rc = wl3501_reset(dev); + } + return rc; +} + +static int wl3501_get_mode(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + wrqu->mode = this->net_type; + return 0; +} + +static int wl3501_get_sens(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + wrqu->sens.value = this->rssi; + wrqu->sens.disabled = !wrqu->sens.value; + wrqu->sens.fixed = 1; + return 0; +} + +static int wl3501_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct iw_range *range = (struct iw_range *)extra; + + /* Set the length (very important for backward compatibility) */ + wrqu->data.length = sizeof(*range); + + /* Set all the info we don't care or don't know about to zero */ + memset(range, 0, sizeof(*range)); + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 1; + range->throughput = 2 * 1000 * 1000; /* ~2 Mb/s */ + /* FIXME: study the code to fill in more fields... */ + return 0; +} + +static int wl3501_set_wap(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + static const u8 bcast[ETH_ALEN] = { 255, 255, 255, 255, 255, 255 }; + int rc = -EINVAL; + + /* FIXME: we support other ARPHRDs...*/ + if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) + goto out; + if (!memcmp(bcast, wrqu->ap_addr.sa_data, ETH_ALEN)) { + /* FIXME: rescan? */ + } else + memcpy(this->bssid, wrqu->ap_addr.sa_data, ETH_ALEN); + /* FIXME: rescan? deassoc & scan? */ + rc = 0; +out: + return rc; +} + +static int wl3501_get_wap(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + wrqu->ap_addr.sa_family = ARPHRD_ETHER; + memcpy(wrqu->ap_addr.sa_data, this->bssid, ETH_ALEN); + return 0; +} + +static int wl3501_set_scan(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * FIXME: trigger scanning with a reset, yes, I'm lazy + */ + return wl3501_reset(dev); +} + +static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + int i; + char *current_ev = extra; + struct iw_event iwe; + + for (i = 0; i < this->bss_cnt; ++i) { + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_ADDR_LEN); + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + iwe.u.data.length = this->bss_set[i].ssid.el.len; + current_ev = iwe_stream_add_point(current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, + this->bss_set[i].ssid.essid); + iwe.cmd = SIOCGIWMODE; + iwe.u.mode = this->bss_set[i].bss_type; + current_ev = iwe_stream_add_event(current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_UINT_LEN); + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = this->bss_set[i].ds_pset.chan; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_FREQ_LEN); + iwe.cmd = SIOCGIWENCODE; + if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, NULL); + } + /* Length of data */ + wrqu->data.length = (current_ev - extra); + wrqu->data.flags = 0; /* FIXME: set properly these flags */ + return 0; +} + +static int wl3501_set_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + if (wrqu->data.flags) { + iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, + &this->essid.el, + extra, wrqu->data.length); + } else { /* We accept any ESSID */ + iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, + &this->essid.el, "ANY", 3); + } + return wl3501_reset(dev); +} + +static int wl3501_get_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&this->lock, flags); + wrqu->essid.flags = 1; + wrqu->essid.length = this->essid.el.len; + memcpy(extra, this->essid.essid, this->essid.el.len); + spin_unlock_irqrestore(&this->lock, flags); + return 0; +} + +static int wl3501_set_nick(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + if (wrqu->data.length > sizeof(this->nick)) + return -E2BIG; + strlcpy(this->nick, extra, wrqu->data.length); + return 0; +} + +static int wl3501_get_nick(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct wl3501_card *this = dev->priv; + + strlcpy(extra, this->nick, 32); + wrqu->data.length = strlen(extra); + return 0; +} + +static int wl3501_get_rate(struct net_device *dev, struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * FIXME: have to see from where to get this info, perhaps this card + * works at 1 Mbit/s too... for now leave at 2 Mbit/s that is the most + * common with the Planet Access Points. -acme + */ + wrqu->bitrate.value = 2000000; + wrqu->bitrate.fixed = 1; + return 0; +} + +static int wl3501_get_rts_threshold(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + u16 threshold; /* size checked: it is u16 */ + struct wl3501_card *this = dev->priv; + int rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_RTS_THRESHOLD, + &threshold, sizeof(threshold)); + if (!rc) { + wrqu->rts.value = threshold; + wrqu->rts.disabled = threshold >= 2347; + wrqu->rts.fixed = 1; + } + return rc; +} + +static int wl3501_get_frag_threshold(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + u16 threshold; /* size checked: it is u16 */ + struct wl3501_card *this = dev->priv; + int rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_FRAG_THRESHOLD, + &threshold, sizeof(threshold)); + if (!rc) { + wrqu->frag.value = threshold; + wrqu->frag.disabled = threshold >= 2346; + wrqu->frag.fixed = 1; + } + return rc; +} + +static int wl3501_get_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + u16 txpow; + struct wl3501_card *this = dev->priv; + int rc = wl3501_get_mib_value(this, + WL3501_MIB_ATTR_CURRENT_TX_PWR_LEVEL, + &txpow, sizeof(txpow)); + if (!rc) { + wrqu->txpower.value = txpow; + wrqu->txpower.disabled = 0; + /* + * From the MIB values I think this can be configurable, + * as it lists several tx power levels -acme + */ + wrqu->txpower.fixed = 0; + wrqu->txpower.flags = IW_TXPOW_MWATT; + } + return rc; +} + +static int wl3501_get_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + u8 retry; /* size checked: it is u8 */ + struct wl3501_card *this = dev->priv; + int rc = wl3501_get_mib_value(this, + WL3501_MIB_ATTR_LONG_RETRY_LIMIT, + &retry, sizeof(retry)); + if (rc) + goto out; + if (wrqu->retry.flags & IW_RETRY_MAX) { + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + goto set_value; + } + rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_SHORT_RETRY_LIMIT, + &retry, sizeof(retry)); + if (rc) + goto out; + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN; +set_value: + wrqu->retry.value = retry; + wrqu->retry.disabled = 0; +out: + return rc; +} + +static int wl3501_get_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + u8 implemented, restricted, keys[100], len_keys, tocopy; + struct wl3501_card *this = dev->priv; + int rc = wl3501_get_mib_value(this, + WL3501_MIB_ATTR_PRIV_OPT_IMPLEMENTED, + &implemented, sizeof(implemented)); + if (rc) + goto out; + if (!implemented) { + wrqu->encoding.flags = IW_ENCODE_DISABLED; + goto out; + } + rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_EXCLUDE_UNENCRYPTED, + &restricted, sizeof(restricted)); + if (rc) + goto out; + wrqu->encoding.flags = restricted ? IW_ENCODE_RESTRICTED : + IW_ENCODE_OPEN; + rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_KEY_MAPPINGS_LEN, + &len_keys, sizeof(len_keys)); + if (rc) + goto out; + rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_KEY_MAPPINGS, + keys, len_keys); + if (rc) + goto out; + tocopy = min_t(u8, len_keys, wrqu->encoding.length); + tocopy = min_t(u8, tocopy, 100); + wrqu->encoding.length = tocopy; + memset(extra, 0, tocopy); + memcpy(extra, keys, tocopy); +out: + return rc; +} + +static int wl3501_get_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + u8 pwr_state; + struct wl3501_card *this = dev->priv; + int rc = wl3501_get_mib_value(this, + WL3501_MIB_ATTR_CURRENT_PWR_STATE, + &pwr_state, sizeof(pwr_state)); + if (rc) + goto out; + wrqu->power.disabled = !pwr_state; + wrqu->power.flags = IW_POWER_ON; +out: + return rc; +} + +static const iw_handler wl3501_handler[] = { + [SIOCGIWNAME - SIOCIWFIRST] = wl3501_get_name, + [SIOCSIWFREQ - SIOCIWFIRST] = wl3501_set_freq, + [SIOCGIWFREQ - SIOCIWFIRST] = wl3501_get_freq, + [SIOCSIWMODE - SIOCIWFIRST] = wl3501_set_mode, + [SIOCGIWMODE - SIOCIWFIRST] = wl3501_get_mode, + [SIOCGIWSENS - SIOCIWFIRST] = wl3501_get_sens, + [SIOCGIWRANGE - SIOCIWFIRST] = wl3501_get_range, + [SIOCSIWSPY - SIOCIWFIRST] = iw_handler_set_spy, + [SIOCGIWSPY - SIOCIWFIRST] = iw_handler_get_spy, + [SIOCSIWTHRSPY - SIOCIWFIRST] = iw_handler_set_thrspy, + [SIOCGIWTHRSPY - SIOCIWFIRST] = iw_handler_get_thrspy, + [SIOCSIWAP - SIOCIWFIRST] = wl3501_set_wap, + [SIOCGIWAP - SIOCIWFIRST] = wl3501_get_wap, + [SIOCSIWSCAN - SIOCIWFIRST] = wl3501_set_scan, + [SIOCGIWSCAN - SIOCIWFIRST] = wl3501_get_scan, + [SIOCSIWESSID - SIOCIWFIRST] = wl3501_set_essid, + [SIOCGIWESSID - SIOCIWFIRST] = wl3501_get_essid, + [SIOCSIWNICKN - SIOCIWFIRST] = wl3501_set_nick, + [SIOCGIWNICKN - SIOCIWFIRST] = wl3501_get_nick, + [SIOCGIWRATE - SIOCIWFIRST] = wl3501_get_rate, + [SIOCGIWRTS - SIOCIWFIRST] = wl3501_get_rts_threshold, + [SIOCGIWFRAG - SIOCIWFIRST] = wl3501_get_frag_threshold, + [SIOCGIWTXPOW - SIOCIWFIRST] = wl3501_get_txpow, + [SIOCGIWRETRY - SIOCIWFIRST] = wl3501_get_retry, + [SIOCGIWENCODE - SIOCIWFIRST] = wl3501_get_encode, + [SIOCGIWPOWER - SIOCIWFIRST] = wl3501_get_power, +}; + +static const struct iw_handler_def wl3501_handler_def = { + .num_standard = sizeof(wl3501_handler) / sizeof(iw_handler), + .standard = (iw_handler *)wl3501_handler, + .spy_offset = offsetof(struct wl3501_card, spy_data), +}; + +/** + * wl3501_attach - creates an "instance" of the driver + * + * Creates an "instance" of the driver, allocating local data structures for + * one device. The device is registered with Card Services. + * + * The dev_link structure is initialized, but we don't actually configure the + * card at this point -- we wait until we receive a card insertion event. + */ +static dev_link_t *wl3501_attach(void) +{ + client_reg_t client_reg; + dev_link_t *link; + struct net_device *dev; + int ret; + + /* Initialize the dev_link_t structure */ + link = kmalloc(sizeof(*link), GFP_KERNEL); + if (!link) + goto out; + memset(link, 0, sizeof(struct dev_link_t)); + + /* The io structure describes IO port mapping */ + link->io.NumPorts1 = 16; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = 5; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = wl3501_interrupt; + + /* General socket configuration */ + link->conf.Attributes = CONF_ENABLE_IRQ; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + link->conf.ConfigIndex = 1; + link->conf.Present = PRESENT_OPTION; + + dev = alloc_etherdev(sizeof(struct wl3501_card)); + if (!dev) + goto out_link; + dev->open = wl3501_open; + dev->stop = wl3501_close; + dev->hard_start_xmit = wl3501_hard_start_xmit; + dev->tx_timeout = wl3501_tx_timeout; + dev->watchdog_timeo = 5 * HZ; + dev->get_stats = wl3501_get_stats; + dev->get_wireless_stats = wl3501_get_wireless_stats; + dev->wireless_handlers = (struct iw_handler_def *)&wl3501_handler_def; + SET_ETHTOOL_OPS(dev, &ops); + netif_stop_queue(dev); + link->priv = link->irq.Instance = dev; + + /* Register with Card Services */ + link->next = wl3501_dev_list; + wl3501_dev_list = link; + client_reg.dev_info = &wl3501_dev_info; + client_reg.EventMask = CS_EVENT_CARD_INSERTION | + CS_EVENT_RESET_PHYSICAL | + CS_EVENT_CARD_RESET | + CS_EVENT_CARD_REMOVAL | + CS_EVENT_PM_SUSPEND | + CS_EVENT_PM_RESUME; + client_reg.event_handler = wl3501_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret) { + cs_error(link->handle, RegisterClient, ret); + wl3501_detach(link); + link = NULL; + } +out: + return link; +out_link: + kfree(link); + link = NULL; + goto out; +} + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +/** + * wl3501_config - configure the PCMCIA socket and make eth device available + * @link - FILL_IN + * + * wl3501_config() is scheduled to run after a CARD_INSERTION event is + * received, to configure the PCMCIA socket, and to make the ethernet device + * available to the system. + */ +static void wl3501_config(dev_link_t *link) +{ + tuple_t tuple; + cisparse_t parse; + client_handle_t handle = link->handle; + struct net_device *dev = link->priv; + int i = 0, j, last_fn, last_ret; + unsigned char bf[64]; + struct wl3501_card *this; + + /* This reads the card's CONFIG tuple to find its config registers. */ + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CONFIG; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + tuple.TupleData = bf; + tuple.TupleDataMax = sizeof(bf); + tuple.TupleOffset = 0; + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Try allocating IO ports. This tries a few fixed addresses. If you + * want, you can also read the card's config table to pick addresses -- + * see the serial driver for an example. */ + + for (j = 0x280; j < 0x400; j += 0x20) { + /* The '^0x300' is so that we probe 0x300-0x3ff first, then + * 0x200-0x2ff, and so on, because this seems safer */ + link->io.BasePort1 = j; + link->io.BasePort2 = link->io.BasePort1 + 0x10; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) + break; + } + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestIO, i); + goto failed; + } + + /* Now allocate an interrupt line. Note that this does not actually + * assign a handler to the interrupt. */ + + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + + /* This actually configures the PCMCIA socket -- setting up the I/O + * windows and the interrupt mapping. */ + + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); + + dev->irq = link->irq.AssignedIRQ; + dev->base_addr = link->io.BasePort1; + SET_NETDEV_DEV(dev, &handle_to_dev(handle)); + if (register_netdev(dev)) { + printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n"); + goto failed; + } + + SET_MODULE_OWNER(dev); + + this = dev->priv; + /* + * At this point, the dev_node_t structure(s) should be initialized and + * arranged in a linked list at link->dev. + */ + link->dev = &this->node; + link->state &= ~DEV_CONFIG_PENDING; + + this->base_addr = dev->base_addr; + + if (!wl3501_get_flash_mac_addr(this)) { + printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n", + dev->name); + goto failed; + } + strcpy(this->node.dev_name, dev->name); + + /* print probe information */ + printk(KERN_INFO "%s: wl3501 @ 0x%3.3x, IRQ %d, MAC addr in flash ROM:", + dev->name, this->base_addr, (int)dev->irq); + for (i = 0; i < 6; i++) { + dev->dev_addr[i] = ((char *)&this->mac_addr)[i]; + printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]); + } + printk("\n"); + /* + * Initialize card parameters - added by jss + */ + this->net_type = IW_MODE_INFRA; + this->bss_cnt = 0; + this->join_sta_bss = 0; + this->adhoc_times = 0; + iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, &this->essid.el, + "ANY", 3); + this->card_name[0] = '\0'; + this->firmware_date[0] = '\0'; + this->rssi = 255; + this->chan = iw_default_channel(this->reg_domain); + strlcpy(this->nick, "Planet WL3501", sizeof(this->nick)); + spin_lock_init(&this->lock); + init_waitqueue_head(&this->wait); + netif_start_queue(dev); + goto out; +cs_failed: + cs_error(link->handle, last_fn, last_ret); +failed: + wl3501_release(link); +out: + return; +} + +/** + * wl3501_release - unregister the net, release PCMCIA configuration + * @arg - link + * + * After a card is removed, wl3501_release() will unregister the net device, + * and release the PCMCIA configuration. If the device is still open, this + * will be postponed until it is closed. + */ +static void wl3501_release(dev_link_t *link) +{ + struct net_device *dev = link->priv; + + /* Unlink the device chain */ + if (link->dev) { + unregister_netdev(dev); + link->dev = NULL; + } + + /* Don't bother checking to see if these succeed or not */ + pcmcia_release_configuration(link->handle); + pcmcia_release_io(link->handle, &link->io); + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; +} + +/** + * wl3501_event - The card status event handler + * @event - event + * @pri - priority + * @args - arguments for this event + * + * The card status event handler. Mostly, this schedules other stuff to run + * after an event is received. A CARD_REMOVAL event also sets some flags to + * discourage the net drivers from trying to talk to the card any more. + * + * When a CARD_REMOVAL event is received, we immediately set a flag to block + * future accesses to this device. All the functions that actually access the + * device should check this flag to make sure the card is still present. + */ +static int wl3501_event(event_t event, int pri, event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + struct net_device *dev = link->priv; + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + while (link->open > 0) + wl3501_close(dev); + netif_device_detach(dev); + wl3501_release(link); + } + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + wl3501_config(link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + wl3501_pwr_mgmt(dev->priv, WL3501_SUSPEND); + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) { + if (link->open) + netif_device_detach(dev); + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + wl3501_pwr_mgmt(dev->priv, WL3501_RESUME); + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, &link->conf); + if (link->open) { + wl3501_reset(dev); + netif_device_attach(dev); + } + } + break; + } + return 0; +} + +static struct pcmcia_driver wl3501_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "wl3501_cs", + }, + .attach = wl3501_attach, + .detach = wl3501_detach, +}; + +static int __init wl3501_init_module(void) +{ + return pcmcia_register_driver(&wl3501_driver); +} + +static void __exit wl3501_exit_module(void) +{ + dprintk(0, ": unloading"); + pcmcia_unregister_driver(&wl3501_driver); + BUG_ON(wl3501_dev_list != NULL); +} + +module_init(wl3501_init_module); +module_exit(wl3501_exit_module); + +MODULE_AUTHOR("Fox Chen <mhchen@golf.ccl.itri.org.tw>, " + "Arnaldo Carvalho de Melo <acme@conectiva.com.br>," + "Gustavo Niemeyer <niemeyer@conectiva.com>"); +MODULE_DESCRIPTION("Planet wl3501 wireless driver"); +MODULE_LICENSE("GPL"); |