diff options
Diffstat (limited to 'drivers/net')
27 files changed, 818 insertions, 615 deletions
diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 068c3563e00..88bbd8ffa7f 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -190,8 +190,10 @@ static struct devprobe2 isa_probes[] __initdata = { {seeq8005_probe, 0}, #endif #ifdef CONFIG_CS89x0 +#ifndef CONFIG_CS89x0_PLATFORM {cs89x0_probe, 0}, #endif +#endif #ifdef CONFIG_AT1700 {at1700_probe, 0}, #endif diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d6e85864bee..0c76186bb9e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2572,12 +2572,16 @@ re_arm: static int bond_has_this_ip(struct bonding *bond, __be32 ip) { struct vlan_entry *vlan; + struct net_device *vlan_dev; - if (ip == bond->master_ip) + if (ip == bond_confirm_addr(bond->dev, 0, ip)) return 1; list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { - if (ip == vlan->vlan_ip) + rcu_read_lock(); + vlan_dev = __vlan_find_dev_deep(bond->dev, vlan->vlan_id); + rcu_read_unlock(); + if (vlan_dev && ip == bond_confirm_addr(vlan_dev, 0, ip)) return 1; } @@ -2619,17 +2623,19 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) int i, vlan_id; __be32 *targets = bond->params.arp_targets; struct vlan_entry *vlan; - struct net_device *vlan_dev; + struct net_device *vlan_dev = NULL; struct rtable *rt; for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + __be32 addr; if (!targets[i]) break; pr_debug("basa: target %x\n", targets[i]); if (!bond_vlan_used(bond)) { pr_debug("basa: empty vlan: arp_send\n"); + addr = bond_confirm_addr(bond->dev, targets[i], 0); bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], - bond->master_ip, 0); + addr, 0); continue; } @@ -2654,8 +2660,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) if (rt->dst.dev == bond->dev) { ip_rt_put(rt); pr_debug("basa: rtdev == bond->dev: arp_send\n"); + addr = bond_confirm_addr(bond->dev, targets[i], 0); bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], - bond->master_ip, 0); + addr, 0); continue; } @@ -2673,10 +2680,11 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) } } - if (vlan_id) { + if (vlan_id && vlan_dev) { ip_rt_put(rt); + addr = bond_confirm_addr(vlan_dev, targets[i], 0); bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], - vlan->vlan_ip, vlan_id); + addr, vlan_id); continue; } @@ -3298,68 +3306,10 @@ static int bond_netdev_event(struct notifier_block *this, return NOTIFY_DONE; } -/* - * bond_inetaddr_event: handle inetaddr notifier chain events. - * - * We keep track of device IPs primarily to use as source addresses in - * ARP monitor probes (rather than spewing out broadcasts all the time). - * - * We track one IP for the main device (if it has one), plus one per VLAN. - */ -static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - struct in_ifaddr *ifa = ptr; - struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev; - struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id); - struct bonding *bond; - struct vlan_entry *vlan; - - /* we only care about primary address */ - if(ifa->ifa_flags & IFA_F_SECONDARY) - return NOTIFY_DONE; - - list_for_each_entry(bond, &bn->dev_list, bond_list) { - if (bond->dev == event_dev) { - switch (event) { - case NETDEV_UP: - bond->master_ip = ifa->ifa_local; - return NOTIFY_OK; - case NETDEV_DOWN: - bond->master_ip = 0; - return NOTIFY_OK; - default: - return NOTIFY_DONE; - } - } - - list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { - vlan_dev = __vlan_find_dev_deep(bond->dev, - vlan->vlan_id); - if (vlan_dev == event_dev) { - switch (event) { - case NETDEV_UP: - vlan->vlan_ip = ifa->ifa_local; - return NOTIFY_OK; - case NETDEV_DOWN: - vlan->vlan_ip = 0; - return NOTIFY_OK; - default: - return NOTIFY_DONE; - } - } - } - } - return NOTIFY_DONE; -} - static struct notifier_block bond_netdev_notifier = { .notifier_call = bond_netdev_event, }; -static struct notifier_block bond_inetaddr_notifier = { - .notifier_call = bond_inetaddr_event, -}; - /*---------------------------- Hashing Policies -----------------------------*/ /* @@ -4928,7 +4878,6 @@ static int __init bonding_init(void) } register_netdevice_notifier(&bond_netdev_notifier); - register_inetaddr_notifier(&bond_inetaddr_notifier); out: return res; err: @@ -4942,7 +4891,6 @@ err_link: static void __exit bonding_exit(void) { unregister_netdevice_notifier(&bond_netdev_notifier); - unregister_inetaddr_notifier(&bond_inetaddr_notifier); bond_destroy_debugfs(); diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 1aecc37e5b4..9f2bae6616d 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -21,6 +21,7 @@ #include <linux/cpumask.h> #include <linux/in6.h> #include <linux/netpoll.h> +#include <linux/inetdevice.h> #include "bond_3ad.h" #include "bond_alb.h" @@ -166,7 +167,6 @@ struct bond_parm_tbl { struct vlan_entry { struct list_head vlan_list; - __be32 vlan_ip; unsigned short vlan_id; }; @@ -232,7 +232,6 @@ struct bonding { struct list_head bond_list; struct netdev_hw_addr_list mc_list; int (*xmit_hash_policy)(struct sk_buff *, int); - __be32 master_ip; u16 rr_tx_counter; struct ad_bond_info ad_info; struct alb_bond_info alb_info; @@ -378,6 +377,21 @@ static inline bool bond_is_slave_inactive(struct slave *slave) return slave->inactive; } +static inline __be32 bond_confirm_addr(struct net_device *dev, __be32 dst, __be32 local) +{ + struct in_device *in_dev; + __be32 addr = 0; + + rcu_read_lock(); + in_dev = __in_dev_get_rcu(dev); + + if (in_dev) + addr = inet_confirm_addr(in_dev, dst, local, RT_SCOPE_HOST); + + rcu_read_unlock(); + return addr; +} + struct bond_net; struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr); diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index 7b65716b873..c95e7b5e2b8 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -47,6 +47,7 @@ #include "bnx2x/bnx2x_hsi.h" #include "../../../scsi/bnx2i/57xx_iscsi_constants.h" #include "../../../scsi/bnx2i/57xx_iscsi_hsi.h" +#include "../../../scsi/bnx2fc/bnx2fc_constants.h" #include "cnic.h" #include "cnic_defs.h" @@ -2547,7 +2548,7 @@ static void cnic_bnx2x_kwqe_err(struct cnic_dev *dev, struct kwqe *kwqe) } kcqe.kcqe_op_flag = kcqe_op << KCQE_FLAGS_OPCODE_SHIFT; kcqe.kcqe_op_flag |= KCQE_FLAGS_LAYER_MASK_L5_FCOE; - kcqe.kcqe_info1 = FCOE_KCQE_COMPLETION_STATUS_NIC_ERROR; + kcqe.kcqe_info1 = FCOE_KCQE_COMPLETION_STATUS_PARITY_ERROR; kcqe.kcqe_info2 = cid; kcqe.kcqe_info0 = l5_cid; @@ -2558,7 +2559,7 @@ static void cnic_bnx2x_kwqe_err(struct cnic_dev *dev, struct kwqe *kwqe) kcqe.kcqe_op_flag = (opcode + 0x10) << KCQE_FLAGS_OPCODE_SHIFT; kcqe.kcqe_op_flag |= KCQE_FLAGS_LAYER_MASK_L5_ISCSI; - kcqe.kcqe_info1 = ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR; + kcqe.kcqe_info1 = ISCSI_KCQE_COMPLETION_STATUS_PARITY_ERR; kcqe.kcqe_info2 = cid; cnic_get_l5_cid(cp, BNX2X_SW_CID(cid), &kcqe.kcqe_info0); @@ -2577,7 +2578,7 @@ static void cnic_bnx2x_kwqe_err(struct cnic_dev *dev, struct kwqe *kwqe) kcqe.kcqe_op_flag = (kcqe_op << KCQE_FLAGS_OPCODE_SHIFT) | KCQE_FLAGS_LAYER_MASK_L4; - l4kcqe->status = L4_KCQE_COMPLETION_STATUS_NIC_ERROR; + l4kcqe->status = L4_KCQE_COMPLETION_STATUS_PARITY_ERROR; l4kcqe->cid = cid; cnic_get_l5_cid(cp, BNX2X_SW_CID(cid), &l4kcqe->conn_id); } else { @@ -3933,7 +3934,8 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe) case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE: if (l4kcqe->status == 0) set_bit(SK_F_OFFLD_COMPLETE, &csk->flags); - else if (l4kcqe->status == L4_KCQE_COMPLETION_STATUS_NIC_ERROR) + else if (l4kcqe->status == + L4_KCQE_COMPLETION_STATUS_PARITY_ERROR) set_bit(SK_F_HW_ERR, &csk->flags); smp_mb__before_clear_bit(); @@ -3946,7 +3948,7 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe) case L4_KCQE_OPCODE_VALUE_RESET_COMP: case L5CM_RAMROD_CMD_ID_SEARCHER_DELETE: case L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD: - if (l4kcqe->status == L4_KCQE_COMPLETION_STATUS_NIC_ERROR) + if (l4kcqe->status == L4_KCQE_COMPLETION_STATUS_PARITY_ERROR) set_bit(SK_F_HW_ERR, &csk->flags); cp->close_conn(csk, opcode); diff --git a/drivers/net/ethernet/broadcom/cnic_defs.h b/drivers/net/ethernet/broadcom/cnic_defs.h index 06ca00266d7..382c98b0cc0 100644 --- a/drivers/net/ethernet/broadcom/cnic_defs.h +++ b/drivers/net/ethernet/broadcom/cnic_defs.h @@ -35,16 +35,6 @@ #define L5CM_RAMROD_CMD_ID_SEARCHER_DELETE (L5CM_RAMROD_CMD_ID_BASE + 14) #define L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD (L5CM_RAMROD_CMD_ID_BASE + 15) -#define FCOE_KCQE_OPCODE_INIT_FUNC (0x10) -#define FCOE_KCQE_OPCODE_DESTROY_FUNC (0x11) -#define FCOE_KCQE_OPCODE_STAT_FUNC (0x12) -#define FCOE_KCQE_OPCODE_OFFLOAD_CONN (0x15) -#define FCOE_KCQE_OPCODE_ENABLE_CONN (0x16) -#define FCOE_KCQE_OPCODE_DISABLE_CONN (0x17) -#define FCOE_KCQE_OPCODE_DESTROY_CONN (0x18) -#define FCOE_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20) -#define FCOE_KCQE_OPCODE_FCOE_ERROR (0x21) - #define FCOE_RAMROD_CMD_ID_INIT_FUNC (FCOE_KCQE_OPCODE_INIT_FUNC) #define FCOE_RAMROD_CMD_ID_DESTROY_FUNC (FCOE_KCQE_OPCODE_DESTROY_FUNC) #define FCOE_RAMROD_CMD_ID_STAT_FUNC (FCOE_KCQE_OPCODE_STAT_FUNC) @@ -54,23 +44,6 @@ #define FCOE_RAMROD_CMD_ID_DESTROY_CONN (FCOE_KCQE_OPCODE_DESTROY_CONN) #define FCOE_RAMROD_CMD_ID_TERMINATE_CONN (0x81) -#define FCOE_KWQE_OPCODE_INIT1 (0) -#define FCOE_KWQE_OPCODE_INIT2 (1) -#define FCOE_KWQE_OPCODE_INIT3 (2) -#define FCOE_KWQE_OPCODE_OFFLOAD_CONN1 (3) -#define FCOE_KWQE_OPCODE_OFFLOAD_CONN2 (4) -#define FCOE_KWQE_OPCODE_OFFLOAD_CONN3 (5) -#define FCOE_KWQE_OPCODE_OFFLOAD_CONN4 (6) -#define FCOE_KWQE_OPCODE_ENABLE_CONN (7) -#define FCOE_KWQE_OPCODE_DISABLE_CONN (8) -#define FCOE_KWQE_OPCODE_DESTROY_CONN (9) -#define FCOE_KWQE_OPCODE_DESTROY (10) -#define FCOE_KWQE_OPCODE_STAT (11) - -#define FCOE_KCQE_COMPLETION_STATUS_ERROR (0x1) -#define FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE (0x3) -#define FCOE_KCQE_COMPLETION_STATUS_NIC_ERROR (0x5) - /* KCQ (kernel completion queue) response op codes */ #define L4_KCQE_OPCODE_VALUE_CLOSE_COMP (53) #define L4_KCQE_OPCODE_VALUE_RESET_COMP (54) @@ -87,6 +60,7 @@ /* KCQ (kernel completion queue) completion status */ #define L4_KCQE_COMPLETION_STATUS_SUCCESS (0) #define L4_KCQE_COMPLETION_STATUS_NIC_ERROR (4) +#define L4_KCQE_COMPLETION_STATUS_PARITY_ERROR (0x81) #define L4_KCQE_COMPLETION_STATUS_TIMEOUT (0x93) #define L4_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAIL (0x83) diff --git a/drivers/net/ethernet/broadcom/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h index 60deb84d36b..289274e546b 100644 --- a/drivers/net/ethernet/broadcom/cnic_if.h +++ b/drivers/net/ethernet/broadcom/cnic_if.h @@ -12,8 +12,8 @@ #ifndef CNIC_IF_H #define CNIC_IF_H -#define CNIC_MODULE_VERSION "2.5.9" -#define CNIC_MODULE_RELDATE "Feb 8, 2012" +#define CNIC_MODULE_VERSION "2.5.10" +#define CNIC_MODULE_RELDATE "March 21, 2012" #define CNIC_ULP_RDMA 0 #define CNIC_ULP_ISCSI 1 diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a374f278834..4e4bb387586 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -88,10 +88,10 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits) #define DRV_MODULE_NAME "tg3" #define TG3_MAJ_NUM 3 -#define TG3_MIN_NUM 122 +#define TG3_MIN_NUM 123 #define DRV_MODULE_VERSION \ __stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM) -#define DRV_MODULE_RELDATE "December 7, 2011" +#define DRV_MODULE_RELDATE "March 21, 2012" #define RESET_KIND_SHUTDOWN 0 #define RESET_KIND_INIT 1 @@ -5952,8 +5952,10 @@ next_pkt_nopost: tpr->rx_std_prod_idx = std_prod_idx & tp->rx_std_ring_mask; tpr->rx_jmb_prod_idx = jmb_prod_idx & tp->rx_jmb_ring_mask; - if (tnapi != &tp->napi[1]) + if (tnapi != &tp->napi[1]) { + tp->rx_refill = true; napi_schedule(&tp->napi[1].napi); + } } return received; @@ -6133,6 +6135,7 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget) u32 std_prod_idx = dpr->rx_std_prod_idx; u32 jmb_prod_idx = dpr->rx_jmb_prod_idx; + tp->rx_refill = false; for (i = 1; i < tp->irq_cnt; i++) err |= tg3_rx_prodring_xfer(tp, dpr, &tp->napi[i].prodring); @@ -6196,9 +6199,25 @@ static int tg3_poll_msix(struct napi_struct *napi, int budget) /* check for RX/TX work to do */ if (likely(sblk->idx[0].tx_consumer == tnapi->tx_cons && *(tnapi->rx_rcb_prod_idx) == tnapi->rx_rcb_ptr)) { + + /* This test here is not race free, but will reduce + * the number of interrupts by looping again. + */ + if (tnapi == &tp->napi[1] && tp->rx_refill) + continue; + napi_complete(napi); /* Reenable interrupts. */ tw32_mailbox(tnapi->int_mbox, tnapi->last_tag << 24); + + /* This test here is synchronized by napi_schedule() + * and napi_complete() to close the race condition. + */ + if (unlikely(tnapi == &tp->napi[1] && tp->rx_refill)) { + tw32(HOSTCC_MODE, tp->coalesce_mode | + HOSTCC_MODE_ENABLE | + tnapi->coal_now); + } mmiowb(); break; } diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 66bcfca5526..93865f899a4 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -3007,6 +3007,7 @@ struct tg3 { u32 rx_std_max_post; u32 rx_offset; u32 rx_pkt_map_sz; + bool rx_refill; /* begin "everything else" cacheline(s) section */ diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 1f8648f099c..8388e36cf08 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -5,8 +5,7 @@ config NET_VENDOR_CIRRUS bool "Cirrus devices" default y - depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \ - || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC + depends on ISA || EISA || ARM || MAC ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -21,8 +20,7 @@ if NET_VENDOR_CIRRUS config CS89x0 tristate "CS89x0 support" - depends on (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440) + depends on ISA || EISA || ARM ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -33,10 +31,15 @@ config CS89x0 To compile this driver as a module, choose M here. The module will be called cs89x0. -config CS89x0_NONISA_IRQ - def_bool y - depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440 +config CS89x0_PLATFORM + bool "CS89x0 platform driver support" + depends on CS89x0 + help + Say Y to compile the cs89x0 driver as a platform driver. This + makes this driver suitable for use on certain evaluation boards + such as the iMX21ADS. + + If you are unsure, say N. config EP93XX_ETH tristate "EP93xx Ethernet support" diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 98c171b3a45..b9406cbfc18 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -100,9 +100,6 @@ */ -/* Always include 'config.h' first in case the user wants to turn on - or override something. */ -#include <linux/module.h> /* * Set this to zero to disable DMA code @@ -131,9 +128,12 @@ */ +#include <linux/module.h> +#include <linux/printk.h> #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/platform_device.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/fcntl.h> @@ -150,6 +150,7 @@ #include <asm/io.h> #include <asm/irq.h> +#include <linux/atomic.h> #if ALLOW_DMA #include <asm/dma.h> #endif @@ -173,26 +174,20 @@ static char version[] __initdata = them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ #if defined(CONFIG_MACH_IXDP2351) +#define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_IXDP2X01) +#define CS89x0_NONISA_IRQ static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; -#elif defined(CONFIG_MACH_QQ2440) -#include <mach/qq2440.h> -static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 }; -static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 }; -#elif defined(CONFIG_MACH_MX31ADS) -#include <mach/board-mx31ads.h> -static unsigned int netcard_portlist[] __used __initdata = { - PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 -}; -static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; #else +#ifndef CONFIG_CS89x0_PLATFORM static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {10,11,12,5}; #endif +#endif #if DEBUGGING static unsigned int net_debug = DEBUGGING; @@ -235,11 +230,16 @@ struct net_local { unsigned char *end_dma_buff; /* points to the end of the buffer */ unsigned char *rx_dma_ptr; /* points to the next packet */ #endif +#ifdef CONFIG_CS89x0_PLATFORM + void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */ + unsigned long phys_addr;/* Physical address for accessing the CS89x0. */ + unsigned long size; /* Length of CS89x0 memory region. */ +#endif }; /* Index to functions, as function prototypes. */ -static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular); +static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular); static int net_open(struct net_device *dev); static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev); static irqreturn_t net_interrupt(int irq, void *dev_id); @@ -293,6 +293,7 @@ static int __init media_fn(char *str) __setup("cs89x0_media=", media_fn); +#ifndef CONFIG_CS89x0_PLATFORM /* Check for a network adaptor of this type, and return '0' iff one exists. If dev->base_addr == 0, probe all likely locations. If dev->base_addr == 1, always return failure. @@ -342,6 +343,7 @@ out: return ERR_PTR(err); } #endif +#endif #if defined(CONFIG_MACH_IXDP2351) static u16 @@ -503,7 +505,7 @@ static const struct net_device_ops net_ops = { */ static int __init -cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) +cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular) { struct net_local *lp = netdev_priv(dev); static unsigned version_printed; @@ -528,15 +530,12 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) lp->force = g_cs89x0_media__force; #endif -#if defined(CONFIG_MACH_QQ2440) - lp->force |= FORCE_RJ45 | FORCE_FULL; -#endif } /* Grab the region so we can find another board if autoIRQ fails. */ /* WTF is going on here? */ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { - printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n", + printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n", DRV_NAME, ioaddr, NETCARD_IO_EXTENT); retval = -EBUSY; goto out1; @@ -548,7 +547,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) will skip the test for the ADD_PORT. */ if (ioaddr & 1) { if (net_debug > 1) - printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr); + printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr); if ((ioaddr & 2) != 2) if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) { printk(KERN_ERR "%s: bad signature 0x%x\n", @@ -559,13 +558,13 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } ioaddr &= ~3; - printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n", + printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n", ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); writeword(ioaddr, ADD_PORT, PP_ChipID); tmp = readword(ioaddr, DATA_PORT); if (tmp != CHIP_EISA_ID_SIG) { - printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!=" + printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!=" CHIP_EISA_ID_SIG_STR "\n", dev->name, ioaddr, DATA_PORT, tmp); retval = -ENODEV; @@ -735,8 +734,9 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) dev->irq = i; } else { i = lp->isa_config & INT_NO_MASK; +#ifndef CONFIG_CS89x0_PLATFORM if (lp->chip_type == CS8900) { -#ifdef CONFIG_CS89x0_NONISA_IRQ +#ifdef CS89x0_NONISA_IRQ i = cs8900_irq_map[0]; #else /* Translate the IRQ using the IRQ mapping table. */ @@ -757,6 +757,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } #endif } +#endif if (!dev->irq) dev->irq = i; } @@ -1167,6 +1168,7 @@ write_irq(struct net_device *dev, int chip_type, int irq) int i; if (chip_type == CS8900) { +#ifndef CONFIG_CS89x0_PLATFORM /* Search the mapping table for the corresponding IRQ pin. */ for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++) if (cs8900_irq_map[i] == irq) @@ -1174,6 +1176,10 @@ write_irq(struct net_device *dev, int chip_type, int irq) /* Not found */ if (i == ARRAY_SIZE(cs8900_irq_map)) i = 3; +#else + /* INTRQ0 pin is used for interrupt generation. */ + i = 0; +#endif writereg(dev, PP_CS8900_ISAINT, i); } else { writereg(dev, PP_CS8920_ISAINT, irq); @@ -1227,7 +1233,7 @@ net_open(struct net_device *dev) } else { -#ifndef CONFIG_CS89x0_NONISA_IRQ +#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); @@ -1745,7 +1751,7 @@ static int set_mac_address(struct net_device *dev, void *p) return 0; } -#ifdef MODULE +#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM) static struct net_device *dev_cs89x0; @@ -1899,7 +1905,97 @@ cleanup_module(void) release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT); free_netdev(dev_cs89x0); } -#endif /* MODULE */ +#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */ + +#ifdef CONFIG_CS89x0_PLATFORM +static int __init cs89x0_platform_probe(struct platform_device *pdev) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + struct net_local *lp; + struct resource *mem_res; + int err; + + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev->irq = platform_get_irq(pdev, 0); + if (mem_res == NULL || dev->irq <= 0) { + dev_warn(&dev->dev, "memory/interrupt resource missing.\n"); + err = -ENXIO; + goto free; + } + + lp->phys_addr = mem_res->start; + lp->size = resource_size(mem_res); + if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) { + dev_warn(&dev->dev, "request_mem_region() failed.\n"); + err = -EBUSY; + goto free; + } + + lp->virt_addr = ioremap(lp->phys_addr, lp->size); + if (!lp->virt_addr) { + dev_warn(&dev->dev, "ioremap() failed.\n"); + err = -ENOMEM; + goto release; + } + + err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0); + if (err) { + dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n"); + goto unmap; + } + + platform_set_drvdata(pdev, dev); + return 0; + +unmap: + iounmap(lp->virt_addr); +release: + release_mem_region(lp->phys_addr, lp->size); +free: + free_netdev(dev); + return err; +} + +static int cs89x0_platform_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct net_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + iounmap(lp->virt_addr); + release_mem_region(lp->phys_addr, lp->size); + free_netdev(dev); + return 0; +} + +static struct platform_driver cs89x0_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .remove = cs89x0_platform_remove, +}; + +static int __init cs89x0_init(void) +{ + return platform_driver_probe(&cs89x0_driver, cs89x0_platform_probe); +} + +module_init(cs89x0_init); + +static void __exit cs89x0_cleanup(void) +{ + platform_driver_unregister(&cs89x0_driver); +} + +module_exit(cs89x0_cleanup); + +#endif /* CONFIG_CS89x0_PLATFORM */ /* * Local variables: diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index d9428f0e738..e7bed530399 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -968,7 +968,6 @@ static int gfar_probe(struct platform_device *ofdev) struct gfar_private *priv = NULL; struct gfar __iomem *regs = NULL; int err = 0, i, grp_idx = 0; - int len_devname; u32 rstat = 0, tstat = 0, rqueue = 0, tqueue = 0; u32 isrg = 0; u32 __iomem *baddr; @@ -1169,40 +1168,16 @@ static int gfar_probe(struct platform_device *ofdev) priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET); /* fill out IRQ number and name fields */ - len_devname = strlen(dev->name); for (i = 0; i < priv->num_grps; i++) { - strncpy(&priv->gfargrp[i].int_name_tx[0], dev->name, - len_devname); if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { - strncpy(&priv->gfargrp[i].int_name_tx[len_devname], - "_g", sizeof("_g")); - priv->gfargrp[i].int_name_tx[ - strlen(priv->gfargrp[i].int_name_tx)] = i+48; - strncpy(&priv->gfargrp[i].int_name_tx[strlen( - priv->gfargrp[i].int_name_tx)], - "_tx", sizeof("_tx") + 1); - - strncpy(&priv->gfargrp[i].int_name_rx[0], dev->name, - len_devname); - strncpy(&priv->gfargrp[i].int_name_rx[len_devname], - "_g", sizeof("_g")); - priv->gfargrp[i].int_name_rx[ - strlen(priv->gfargrp[i].int_name_rx)] = i+48; - strncpy(&priv->gfargrp[i].int_name_rx[strlen( - priv->gfargrp[i].int_name_rx)], - "_rx", sizeof("_rx") + 1); - - strncpy(&priv->gfargrp[i].int_name_er[0], dev->name, - len_devname); - strncpy(&priv->gfargrp[i].int_name_er[len_devname], - "_g", sizeof("_g")); - priv->gfargrp[i].int_name_er[strlen( - priv->gfargrp[i].int_name_er)] = i+48; - strncpy(&priv->gfargrp[i].int_name_er[strlen(\ - priv->gfargrp[i].int_name_er)], - "_er", sizeof("_er") + 1); + sprintf(priv->gfargrp[i].int_name_tx, "%s%s%c%s", + dev->name, "_g", '0' + i, "_tx"); + sprintf(priv->gfargrp[i].int_name_rx, "%s%s%c%s", + dev->name, "_g", '0' + i, "_rx"); + sprintf(priv->gfargrp[i].int_name_er, "%s%s%c%s", + dev->name, "_g", '0' + i, "_er"); } else - priv->gfargrp[i].int_name_tx[len_devname] = '\0'; + strcpy(priv->gfargrp[i].int_name_tx, dev->name); } /* Initialize the filer table */ diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index fc2488adca3..4c9f8d487db 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -517,7 +517,7 @@ extern const char gfar_driver_version[]; #define RXFCB_PERR_MASK 0x000c #define RXFCB_PERR_BADL3 0x0008 -#define GFAR_INT_NAME_MAX IFNAMSIZ + 4 +#define GFAR_INT_NAME_MAX (IFNAMSIZ + 6) /* '_g#_xx' */ struct txbd8 { diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index e877371680a..9010cea68bc 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1616,11 +1616,8 @@ static struct vio_driver ibmveth_driver = { .probe = ibmveth_probe, .remove = ibmveth_remove, .get_desired_dma = ibmveth_get_desired_dma, - .driver = { - .name = ibmveth_driver_name, - .owner = THIS_MODULE, - .pm = &ibmveth_pm_ops, - } + .name = ibmveth_driver_name, + .pm = &ibmveth_pm_ops, }; static int __init ibmveth_module_init(void) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 82c2c86a195..423a1a2a702 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -95,6 +95,10 @@ static int disable_msi = 0; module_param(disable_msi, int, 0); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); +static int legacy_pme = 0; +module_param(legacy_pme, int, 0); +MODULE_PARM_DESC(legacy_pme, "Legacy power management"); + static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ @@ -867,6 +871,13 @@ static void sky2_wol_init(struct sky2_port *sky2) /* Disable PiG firmware */ sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF); + /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */ + if (legacy_pme) { + u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + reg1 |= PCI_Y2_PME_LEGACY; + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + } + /* block receiver */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_read32(hw, B0_CTST); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 2b5af22419a..385a4d5c7c2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -36,8 +36,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 25 -#define QLCNIC_LINUX_VERSIONID "5.0.26" +#define _QLCNIC_LINUX_SUBVERSION 27 +#define QLCNIC_LINUX_VERSIONID "5.0.27" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 81bb1a69e69..75c32e875fe 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1458,8 +1458,10 @@ qlcnic_reset_context(struct qlcnic_adapter *adapter) if (netif_running(netdev)) { err = qlcnic_attach(adapter); - if (!err) + if (!err) { __qlcnic_up(adapter, netdev); + qlcnic_restore_indev_addr(netdev, NETDEV_UP); + } } netif_device_attach(netdev); diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 1dc4fad593e..fee44935501 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2280,7 +2280,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev) if (ret) goto out_release_io; #if defined(CONFIG_SA1100_ASSABET) - NCR_0 |= NCR_ENET_OSC_EN; + neponset_ncr_set(NCR_ENET_OSC_EN); #endif platform_set_drvdata(pdev, ndev); ret = smc_enable_device(pdev); diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 92a037a8228..38e3ae9155b 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1259,10 +1259,7 @@ static struct vio_driver vnet_port_driver = { .id_table = vnet_port_match, .probe = vnet_port_probe, .remove = vnet_port_remove, - .driver = { - .name = "vnet_port", - .owner = THIS_MODULE, - } + .name = "vnet_port", }; static int __init vnet_init(void) diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index e535137eb2d..468047866c8 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -356,7 +356,7 @@ config VLSI_FIR config SA1100_FIR tristate "SA1100 Internal IR" - depends on ARCH_SA1100 && IRDA + depends on ARCH_SA1100 && IRDA && DMA_SA11X0 config VIA_FIR tristate "VIA VT8231/VT1211 SIR/MIR/FIR" diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index da2705061a6..a0d1913a58d 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -15,7 +15,7 @@ * This driver takes one kernel command line parameter, sa1100ir=, with * the following options: * max_rate:baudrate - set the maximum baud rate - * power_leve:level - set the transmitter power level + * power_level:level - set the transmitter power level * tx_lpm:0|1 - set transmit low power mode */ #include <linux/module.h> @@ -30,13 +30,13 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/sa11x0-dma.h> #include <net/irda/irda.h> #include <net/irda/wrapper.h> #include <net/irda/irda_device.h> -#include <asm/irq.h> -#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach/irda.h> @@ -44,8 +44,15 @@ static int power_level = 3; static int tx_lpm; static int max_rate = 4000000; +struct sa1100_buf { + struct device *dev; + struct sk_buff *skb; + struct scatterlist sg; + struct dma_chan *chan; + dma_cookie_t cookie; +}; + struct sa1100_irda { - unsigned char hscr0; unsigned char utcr4; unsigned char power; unsigned char open; @@ -53,12 +60,8 @@ struct sa1100_irda { int speed; int newspeed; - struct sk_buff *txskb; - struct sk_buff *rxskb; - dma_addr_t txbuf_dma; - dma_addr_t rxbuf_dma; - dma_regs_t *txdma; - dma_regs_t *rxdma; + struct sa1100_buf dma_rx; + struct sa1100_buf dma_tx; struct device *dev; struct irda_platform_data *pdata; @@ -67,23 +70,103 @@ struct sa1100_irda { iobuff_t tx_buff; iobuff_t rx_buff; + + int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *); + irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *); }; +static int sa1100_irda_set_speed(struct sa1100_irda *, int); + #define IS_FIR(si) ((si)->speed >= 4000000) #define HPSIR_MAX_RXLEN 2047 +static struct dma_slave_config sa1100_irda_sir_tx = { + .direction = DMA_TO_DEVICE, + .dst_addr = __PREG(Ser2UTDR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_maxburst = 4, +}; + +static struct dma_slave_config sa1100_irda_fir_rx = { + .direction = DMA_FROM_DEVICE, + .src_addr = __PREG(Ser2HSDR), + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .src_maxburst = 8, +}; + +static struct dma_slave_config sa1100_irda_fir_tx = { + .direction = DMA_TO_DEVICE, + .dst_addr = __PREG(Ser2HSDR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_maxburst = 8, +}; + +static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf) +{ + struct dma_chan *chan = buf->chan; + struct dma_tx_state state; + enum dma_status status; + + status = chan->device->device_tx_status(chan, buf->cookie, &state); + if (status != DMA_PAUSED) + return 0; + + return sg_dma_len(&buf->sg) - state.residue; +} + +static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf, + const char *name, struct dma_slave_config *cfg) +{ + dma_cap_mask_t m; + int ret; + + dma_cap_zero(m); + dma_cap_set(DMA_SLAVE, m); + + buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name); + if (!buf->chan) { + dev_err(dev, "unable to request DMA channel for %s\n", + name); + return -ENOENT; + } + + ret = dmaengine_slave_config(buf->chan, cfg); + if (ret) + dev_warn(dev, "DMA slave_config for %s returned %d\n", + name, ret); + + buf->dev = buf->chan->device->dev; + + return 0; +} + +static void sa1100_irda_dma_start(struct sa1100_buf *buf, + enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p) +{ + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = buf->chan; + + desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (desc) { + desc->callback = cb; + desc->callback_param = cb_p; + buf->cookie = dmaengine_submit(desc); + dma_async_issue_pending(chan); + } +} + /* * Allocate and map the receive buffer, unless it is already allocated. */ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) { - if (si->rxskb) + if (si->dma_rx.skb) return 0; - si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC); - - if (!si->rxskb) { + si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC); + if (!si->dma_rx.skb) { printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n"); return -ENOMEM; } @@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) * Align any IP headers that may be contained * within the frame. */ - skb_reserve(si->rxskb, 1); + skb_reserve(si->dma_rx.skb, 1); + + sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN); + if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) { + dev_kfree_skb_any(si->dma_rx.skb); + return -ENOMEM; + } - si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data, - HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); return 0; } @@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) */ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si) { - if (!si->rxskb) { + if (!si->dma_rx.skb) { printk(KERN_ERR "sa1100_ir: rx buffer went missing\n"); return; } @@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si) /* * First empty receive FIFO */ - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; + Ser2HSCR0 = HSCR0_HSSP; /* * Enable the DMA, receiver and receive interrupt. */ - sa1100_clear_dma(si->rxdma); - sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN); - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE; + dmaengine_terminate_all(si->dma_rx.chan); + sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL); + + Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE; } -/* - * Set the IrDA communications speed. - */ -static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed) +static void sa1100_irda_check_speed(struct sa1100_irda *si) { - unsigned long flags; - int brd, ret = -EINVAL; - - switch (speed) { - case 9600: case 19200: case 38400: - case 57600: case 115200: - brd = 3686400 / (16 * speed) - 1; - - /* - * Stop the receive DMA. - */ - if (IS_FIR(si)) - sa1100_stop_dma(si->rxdma); - - local_irq_save(flags); - - Ser2UTCR3 = 0; - Ser2HSCR0 = HSCR0_UART; - - Ser2UTCR1 = brd >> 8; - Ser2UTCR2 = brd; - - /* - * Clear status register - */ - Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; - Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; - - if (si->pdata->set_speed) - si->pdata->set_speed(si->dev, speed); - - si->speed = speed; - - local_irq_restore(flags); - ret = 0; - break; - - case 4000000: - local_irq_save(flags); - - si->hscr0 = 0; - - Ser2HSSR0 = 0xff; - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; - Ser2UTCR3 = 0; - - si->speed = speed; - - if (si->pdata->set_speed) - si->pdata->set_speed(si->dev, speed); - - sa1100_irda_rx_alloc(si); - sa1100_irda_rx_dma_start(si); - - local_irq_restore(flags); - - break; - - default: - break; + if (si->newspeed) { + sa1100_irda_set_speed(si, si->newspeed); + si->newspeed = 0; } - - return ret; } /* - * Control the power state of the IrDA transmitter. - * State: - * 0 - off - * 1 - short range, lowest power - * 2 - medium range, medium power - * 3 - maximum range, high power - * - * Currently, only assabet is known to support this. + * HP-SIR format support. */ -static int -__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state) +static void sa1100_irda_sirtxdma_irq(void *id) { - int ret = 0; - if (si->pdata->set_power) - ret = si->pdata->set_power(si->dev, state); - return ret; -} - -static inline int -sa1100_set_power(struct sa1100_irda *si, unsigned int state) -{ - int ret; - - ret = __sa1100_irda_set_power(si, state); - if (ret == 0) - si->power = state; + struct net_device *dev = id; + struct sa1100_irda *si = netdev_priv(dev); - return ret; -} + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE); + dev_kfree_skb(si->dma_tx.skb); + si->dma_tx.skb = NULL; -static int sa1100_irda_startup(struct sa1100_irda *si) -{ - int ret; + dev->stats.tx_packets++; + dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg); - /* - * Ensure that the ports for this device are setup correctly. - */ - if (si->pdata->startup) { - ret = si->pdata->startup(si->dev); - if (ret) - return ret; - } - - /* - * Configure PPC for IRDA - we want to drive TXD2 low. - * We also want to drive this pin low during sleep. - */ - PPSR &= ~PPC_TXD2; - PSDR &= ~PPC_TXD2; - PPDR |= PPC_TXD2; - - /* - * Enable HP-SIR modulation, and ensure that the port is disabled. - */ - Ser2UTCR3 = 0; - Ser2HSCR0 = HSCR0_UART; - Ser2UTCR4 = si->utcr4; - Ser2UTCR0 = UTCR0_8BitData; - Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL; + /* We need to ensure that the transmitter has finished. */ + do + rmb(); + while (Ser2UTSR1 & UTSR1_TBY); /* - * Clear status register + * Ok, we've finished transmitting. Now enable the receiver. + * Sometimes we get a receive IRQ immediately after a transmit... */ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; - ret = sa1100_irda_set_speed(si, si->speed = 9600); - if (ret) { - Ser2UTCR3 = 0; - Ser2HSCR0 = 0; - - if (si->pdata->shutdown) - si->pdata->shutdown(si->dev); - } - - return ret; -} - -static void sa1100_irda_shutdown(struct sa1100_irda *si) -{ - /* - * Stop all DMA activity. - */ - sa1100_stop_dma(si->rxdma); - sa1100_stop_dma(si->txdma); - - /* Disable the port. */ - Ser2UTCR3 = 0; - Ser2HSCR0 = 0; + sa1100_irda_check_speed(si); - if (si->pdata->shutdown) - si->pdata->shutdown(si->dev); + /* I'm hungry! */ + netif_wake_queue(dev); } -#ifdef CONFIG_PM -/* - * Suspend the IrDA interface. - */ -static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state) +static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev, + struct sa1100_irda *si) { - struct net_device *dev = platform_get_drvdata(pdev); - struct sa1100_irda *si; - - if (!dev) - return 0; - - si = netdev_priv(dev); - if (si->open) { - /* - * Stop the transmit queue - */ - netif_device_detach(dev); - disable_irq(dev->irq); - sa1100_irda_shutdown(si); - __sa1100_irda_set_power(si, 0); + si->tx_buff.data = si->tx_buff.head; + si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, + si->tx_buff.truesize); + + si->dma_tx.skb = skb; + sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len); + if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) { + si->dma_tx.skb = NULL; + netif_wake_queue(dev); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; } - return 0; -} - -/* - * Resume the IrDA interface. - */ -static int sa1100_irda_resume(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sa1100_irda *si; - - if (!dev) - return 0; + sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev); - si = netdev_priv(dev); - if (si->open) { - /* - * If we missed a speed change, initialise at the new speed - * directly. It is debatable whether this is actually - * required, but in the interests of continuing from where - * we left off it is desirable. The converse argument is - * that we should re-negotiate at 9600 baud again. - */ - if (si->newspeed) { - si->speed = si->newspeed; - si->newspeed = 0; - } - - sa1100_irda_startup(si); - __sa1100_irda_set_power(si, si->power); - enable_irq(dev->irq); - - /* - * This automatically wakes up the queue - */ - netif_device_attach(dev); - } + /* + * The mean turn-around time is enforced by XBOF padding, + * so we don't have to do anything special here. + */ + Ser2UTCR3 = UTCR3_TXE; - return 0; + return NETDEV_TX_OK; } -#else -#define sa1100_irda_suspend NULL -#define sa1100_irda_resume NULL -#endif -/* - * HP-SIR format interrupt service routines. - */ -static void sa1100_irda_hpsir_irq(struct net_device *dev) +static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si) { - struct sa1100_irda *si = netdev_priv(dev); int status; status = Ser2UTSR0; @@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev) } - if (status & UTSR0_TFS && si->tx_buff.len) { - /* - * Transmitter FIFO is not full - */ - do { - Ser2UTDR = *si->tx_buff.data++; - si->tx_buff.len -= 1; - } while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len); + return IRQ_HANDLED; +} - if (si->tx_buff.len == 0) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += si->tx_buff.data - - si->tx_buff.head; +/* + * FIR format support. + */ +static void sa1100_irda_firtxdma_irq(void *id) +{ + struct net_device *dev = id; + struct sa1100_irda *si = netdev_priv(dev); + struct sk_buff *skb; - /* - * We need to ensure that the transmitter has - * finished. - */ - do - rmb(); - while (Ser2UTSR1 & UTSR1_TBY); + /* + * Wait for the transmission to complete. Unfortunately, + * the hardware doesn't give us an interrupt to indicate + * "end of frame". + */ + do + rmb(); + while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY); - /* - * Ok, we've finished transmitting. Now enable - * the receiver. Sometimes we get a receive IRQ - * immediately after a transmit... - */ - Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; - Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; + /* + * Clear the transmit underrun bit. + */ + Ser2HSSR0 = HSSR0_TUR; - if (si->newspeed) { - sa1100_irda_set_speed(si, si->newspeed); - si->newspeed = 0; - } + /* + * Do we need to change speed? Note that we're lazy + * here - we don't free the old dma_rx.skb. We don't need + * to allocate a buffer either. + */ + sa1100_irda_check_speed(si); - /* I'm hungry! */ - netif_wake_queue(dev); - } + /* + * Start reception. This disables the transmitter for + * us. This will be using the existing RX buffer. + */ + sa1100_irda_rx_dma_start(si); + + /* Account and free the packet. */ + skb = si->dma_tx.skb; + if (skb) { + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, + DMA_TO_DEVICE); + dev->stats.tx_packets ++; + dev->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + si->dma_tx.skb = NULL; } + + /* + * Make sure that the TX queue is available for sending + * (for retries). TX has priority over RX at all times. + */ + netif_wake_queue(dev); +} + +static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev, + struct sa1100_irda *si) +{ + int mtt = irda_get_mtt(skb); + + si->dma_tx.skb = skb; + sg_set_buf(&si->dma_tx.sg, skb->data, skb->len); + if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) { + si->dma_tx.skb = NULL; + netif_wake_queue(dev); + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev); + + /* + * If we have a mean turn-around time, impose the specified + * specified delay. We could shorten this by timing from + * the point we received the packet. + */ + if (mtt) + udelay(mtt); + + Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE; + + return NETDEV_TX_OK; } static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev) { - struct sk_buff *skb = si->rxskb; - dma_addr_t dma_addr; + struct sk_buff *skb = si->dma_rx.skb; unsigned int len, stat, data; if (!skb) { @@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev /* * Get the current data position. */ - dma_addr = sa1100_get_dma_pos(si->rxdma); - len = dma_addr - si->rxbuf_dma; + len = sa1100_irda_dma_xferred(&si->dma_rx); if (len > HPSIR_MAX_RXLEN) len = HPSIR_MAX_RXLEN; - dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE); + dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE); do { /* @@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev } while (Ser2HSSR0 & HSSR0_EIF); if (stat & HSSR1_EOF) { - si->rxskb = NULL; + si->dma_rx.skb = NULL; skb_put(skb, len); skb->dev = dev; @@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev netif_rx(skb); } else { /* - * Remap the buffer. + * Remap the buffer - it was previously mapped, and we + * hope that this succeeds. */ - si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data, - HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); + dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE); } } /* - * FIR format interrupt service routine. We only have to - * handle RX events; transmit events go via the TX DMA handler. - * - * No matter what, we disable RX, process, and the restart RX. + * We only have to handle RX events here; transmit events go via the TX + * DMA handler. We disable RX, process, and the restart RX. */ -static void sa1100_irda_fir_irq(struct net_device *dev) +static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si) { - struct sa1100_irda *si = netdev_priv(dev); - /* * Stop RX DMA */ - sa1100_stop_dma(si->rxdma); + dmaengine_pause(si->dma_rx.chan); /* * Framing error - we throw away the packet completely. @@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev) /* * Clear out the DMA... */ - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; + Ser2HSCR0 = HSCR0_HSSP; /* * Clear selected status bits now, so we @@ -577,74 +535,124 @@ static void sa1100_irda_fir_irq(struct net_device *dev) * No matter what happens, we must restart reception. */ sa1100_irda_rx_dma_start(si); -} -static irqreturn_t sa1100_irda_irq(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev)))) - sa1100_irda_fir_irq(dev); - else - sa1100_irda_hpsir_irq(dev); return IRQ_HANDLED; } /* - * TX DMA completion handler. + * Set the IrDA communications speed. */ -static void sa1100_irda_txdma_irq(void *id) +static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed) { - struct net_device *dev = id; - struct sa1100_irda *si = netdev_priv(dev); - struct sk_buff *skb = si->txskb; + unsigned long flags; + int brd, ret = -EINVAL; - si->txskb = NULL; + switch (speed) { + case 9600: case 19200: case 38400: + case 57600: case 115200: + brd = 3686400 / (16 * speed) - 1; - /* - * Wait for the transmission to complete. Unfortunately, - * the hardware doesn't give us an interrupt to indicate - * "end of frame". - */ - do - rmb(); - while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY); + /* Stop the receive DMA, and configure transmit. */ + if (IS_FIR(si)) { + dmaengine_terminate_all(si->dma_rx.chan); + dmaengine_slave_config(si->dma_tx.chan, + &sa1100_irda_sir_tx); + } - /* - * Clear the transmit underrun bit. - */ - Ser2HSSR0 = HSSR0_TUR; + local_irq_save(flags); - /* - * Do we need to change speed? Note that we're lazy - * here - we don't free the old rxskb. We don't need - * to allocate a buffer either. - */ - if (si->newspeed) { - sa1100_irda_set_speed(si, si->newspeed); - si->newspeed = 0; - } + Ser2UTCR3 = 0; + Ser2HSCR0 = HSCR0_UART; - /* - * Start reception. This disables the transmitter for - * us. This will be using the existing RX buffer. - */ - sa1100_irda_rx_dma_start(si); + Ser2UTCR1 = brd >> 8; + Ser2UTCR2 = brd; - /* - * Account and free the packet. - */ - if (skb) { - dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE); - dev->stats.tx_packets ++; - dev->stats.tx_bytes += skb->len; - dev_kfree_skb_irq(skb); + /* + * Clear status register + */ + Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; + + if (si->pdata->set_speed) + si->pdata->set_speed(si->dev, speed); + + si->speed = speed; + si->tx_start = sa1100_irda_sir_tx_start; + si->irq = sa1100_irda_sir_irq; + + local_irq_restore(flags); + ret = 0; + break; + + case 4000000: + if (!IS_FIR(si)) + dmaengine_slave_config(si->dma_tx.chan, + &sa1100_irda_fir_tx); + + local_irq_save(flags); + + Ser2HSSR0 = 0xff; + Ser2HSCR0 = HSCR0_HSSP; + Ser2UTCR3 = 0; + + si->speed = speed; + si->tx_start = sa1100_irda_fir_tx_start; + si->irq = sa1100_irda_fir_irq; + + if (si->pdata->set_speed) + si->pdata->set_speed(si->dev, speed); + + sa1100_irda_rx_alloc(si); + sa1100_irda_rx_dma_start(si); + + local_irq_restore(flags); + + break; + + default: + break; } - /* - * Make sure that the TX queue is available for sending - * (for retries). TX has priority over RX at all times. - */ - netif_wake_queue(dev); + return ret; +} + +/* + * Control the power state of the IrDA transmitter. + * State: + * 0 - off + * 1 - short range, lowest power + * 2 - medium range, medium power + * 3 - maximum range, high power + * + * Currently, only assabet is known to support this. + */ +static int +__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state) +{ + int ret = 0; + if (si->pdata->set_power) + ret = si->pdata->set_power(si->dev, state); + return ret; +} + +static inline int +sa1100_set_power(struct sa1100_irda *si, unsigned int state) +{ + int ret; + + ret = __sa1100_irda_set_power(si, state); + if (ret == 0) + si->power = state; + + return ret; +} + +static irqreturn_t sa1100_irda_irq(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct sa1100_irda *si = netdev_priv(dev); + + return si->irq(dev, si); } static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) @@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) if (speed != si->speed && speed != -1) si->newspeed = speed; - /* - * If this is an empty frame, we can bypass a lot. - */ + /* If this is an empty frame, we can bypass a lot. */ if (skb->len == 0) { - if (si->newspeed) { - si->newspeed = 0; - sa1100_irda_set_speed(si, speed); - } + sa1100_irda_check_speed(si); dev_kfree_skb(skb); return NETDEV_TX_OK; } - if (!IS_FIR(si)) { - netif_stop_queue(dev); - - si->tx_buff.data = si->tx_buff.head; - si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, - si->tx_buff.truesize); - - /* - * Set the transmit interrupt enable. This will fire - * off an interrupt immediately. Note that we disable - * the receiver so we won't get spurious characteres - * received. - */ - Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE; - - dev_kfree_skb(skb); - } else { - int mtt = irda_get_mtt(skb); - - /* - * We must not be transmitting... - */ - BUG_ON(si->txskb); - - netif_stop_queue(dev); - - si->txskb = skb; - si->txbuf_dma = dma_map_single(si->dev, skb->data, - skb->len, DMA_TO_DEVICE); - - sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len); - - /* - * If we have a mean turn-around time, impose the specified - * specified delay. We could shorten this by timing from - * the point we received the packet. - */ - if (mtt) - udelay(mtt); + netif_stop_queue(dev); - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE; - } + /* We must not already have a skb to transmit... */ + BUG_ON(si->dma_tx.skb); - return NETDEV_TX_OK; + return si->tx_start(skb, dev, si); } static int @@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) return ret; } +static int sa1100_irda_startup(struct sa1100_irda *si) +{ + int ret; + + /* + * Ensure that the ports for this device are setup correctly. + */ + if (si->pdata->startup) { + ret = si->pdata->startup(si->dev); + if (ret) + return ret; + } + + /* + * Configure PPC for IRDA - we want to drive TXD2 low. + * We also want to drive this pin low during sleep. + */ + PPSR &= ~PPC_TXD2; + PSDR &= ~PPC_TXD2; + PPDR |= PPC_TXD2; + + /* + * Enable HP-SIR modulation, and ensure that the port is disabled. + */ + Ser2UTCR3 = 0; + Ser2HSCR0 = HSCR0_UART; + Ser2UTCR4 = si->utcr4; + Ser2UTCR0 = UTCR0_8BitData; + Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL; + + /* + * Clear status register + */ + Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + + ret = sa1100_irda_set_speed(si, si->speed = 9600); + if (ret) { + Ser2UTCR3 = 0; + Ser2HSCR0 = 0; + + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); + } + + return ret; +} + +static void sa1100_irda_shutdown(struct sa1100_irda *si) +{ + /* + * Stop all DMA activity. + */ + dmaengine_terminate_all(si->dma_rx.chan); + dmaengine_terminate_all(si->dma_tx.chan); + + /* Disable the port. */ + Ser2UTCR3 = 0; + Ser2HSCR0 = 0; + + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); +} + static int sa1100_irda_start(struct net_device *dev) { struct sa1100_irda *si = netdev_priv(dev); @@ -769,26 +797,17 @@ static int sa1100_irda_start(struct net_device *dev) si->speed = 9600; - err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev); - if (err) - goto err_irq; - - err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive", - NULL, NULL, &si->rxdma); + err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc", + &sa1100_irda_fir_rx); if (err) goto err_rx_dma; - err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit", - sa1100_irda_txdma_irq, dev, &si->txdma); + err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr", + &sa1100_irda_sir_tx); if (err) goto err_tx_dma; /* - * The interrupt must remain disabled for now. - */ - disable_irq(dev->irq); - - /* * Setup the serial port for the specified speed. */ err = sa1100_irda_startup(si); @@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev) if (!si->irlap) goto err_irlap; + err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev); + if (err) + goto err_irq; + /* * Now enable the interrupt and start the queue */ si->open = 1; sa1100_set_power(si, power_level); /* low power mode */ - enable_irq(dev->irq); + netif_start_queue(dev); return 0; +err_irq: + irlap_close(si->irlap); err_irlap: si->open = 0; sa1100_irda_shutdown(si); err_startup: - sa1100_free_dma(si->txdma); + dma_release_channel(si->dma_tx.chan); err_tx_dma: - sa1100_free_dma(si->rxdma); + dma_release_channel(si->dma_rx.chan); err_rx_dma: - free_irq(dev->irq, dev); -err_irq: return err; } static int sa1100_irda_stop(struct net_device *dev) { struct sa1100_irda *si = netdev_priv(dev); + struct sk_buff *skb; + + netif_stop_queue(dev); - disable_irq(dev->irq); + si->open = 0; sa1100_irda_shutdown(si); /* - * If we have been doing DMA receive, make sure we + * If we have been doing any DMA activity, make sure we * tidy that up cleanly. */ - if (si->rxskb) { - dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); - dev_kfree_skb(si->rxskb); - si->rxskb = NULL; + skb = si->dma_rx.skb; + if (skb) { + dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, + DMA_FROM_DEVICE); + dev_kfree_skb(skb); + si->dma_rx.skb = NULL; + } + + skb = si->dma_tx.skb; + if (skb) { + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, + DMA_TO_DEVICE); + dev_kfree_skb(skb); + si->dma_tx.skb = NULL; } /* Stop IrLAP */ @@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev) si->irlap = NULL; } - netif_stop_queue(dev); - si->open = 0; - /* * Free resources */ - sa1100_free_dma(si->txdma); - sa1100_free_dma(si->rxdma); + dma_release_channel(si->dma_tx.chan); + dma_release_channel(si->dma_rx.chan); free_irq(dev->irq, dev); sa1100_set_power(si, 0); @@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev) struct net_device *dev; struct sa1100_irda *si; unsigned int baudrate_mask; - int err; + int err, irq; if (!pdev->dev.platform_data) return -EINVAL; + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq < 0 ? irq : -ENXIO; + err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY; if (err) goto err_mem_1; @@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev) if (!dev) goto err_mem_4; + SET_NETDEV_DEV(dev, &pdev->dev); + si = netdev_priv(dev); si->dev = &pdev->dev; si->pdata = pdev->dev.platform_data; + sg_init_table(&si->dma_rx.sg, 1); + sg_init_table(&si->dma_tx.sg, 1); + /* * Initialise the HP-SIR buffers */ err = sa1100_irda_init_iobuf(&si->rx_buff, 14384); if (err) goto err_mem_5; - err = sa1100_irda_init_iobuf(&si->tx_buff, 4000); + err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME); if (err) goto err_mem_5; dev->netdev_ops = &sa1100_irda_netdev_ops; - dev->irq = IRQ_Ser2ICP; + dev->irq = irq; irda_init_max_qos_capabilies(&si->qos); @@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +/* + * Suspend the IrDA interface. + */ +static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sa1100_irda *si; + + if (!dev) + return 0; + + si = netdev_priv(dev); + if (si->open) { + /* + * Stop the transmit queue + */ + netif_device_detach(dev); + disable_irq(dev->irq); + sa1100_irda_shutdown(si); + __sa1100_irda_set_power(si, 0); + } + + return 0; +} + +/* + * Resume the IrDA interface. + */ +static int sa1100_irda_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sa1100_irda *si; + + if (!dev) + return 0; + + si = netdev_priv(dev); + if (si->open) { + /* + * If we missed a speed change, initialise at the new speed + * directly. It is debatable whether this is actually + * required, but in the interests of continuing from where + * we left off it is desirable. The converse argument is + * that we should re-negotiate at 9600 baud again. + */ + if (si->newspeed) { + si->speed = si->newspeed; + si->newspeed = 0; + } + + sa1100_irda_startup(si); + __sa1100_irda_set_power(si, si->power); + enable_irq(dev->irq); + + /* + * This automatically wakes up the queue + */ + netif_device_attach(dev); + } + + return 0; +} +#else +#define sa1100_irda_suspend NULL +#define sa1100_irda_resume NULL +#endif + static struct platform_driver sa1100ir_driver = { .probe = sa1100_irda_probe, .remove = sa1100_irda_remove, diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 790cbdea739..3886b30ed37 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -164,12 +164,14 @@ static void rx_complete(struct urb *req) /* Can't use pskb_pull() on page in IRQ */ memcpy(skb_put(skb, 1), page_address(page), 1); skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, - page, 1, req->actual_length); + page, 1, req->actual_length, + req->actual_length); page = NULL; } } else { skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, - page, 0, req->actual_length); + page, 0, req->actual_length, + req->actual_length); page = NULL; } if (req->actual_length < PAGE_SIZE) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index aac68f5195c..552d24bf862 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -409,6 +409,42 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_force_int4, }, + { /* ZTE (Vodafone) K3565-Z */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19d2, + .idProduct = 0x0063, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_force_int4, + }, + { /* ZTE (Vodafone) K3570-Z */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19d2, + .idProduct = 0x1008, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_force_int4, + }, + { /* ZTE (Vodafone) K3571-Z */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19d2, + .idProduct = 0x1010, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_force_int4, + }, + { /* ZTE (Vodafone) K4505-Z */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19d2, + .idProduct = 0x0104, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_force_int4, + }, {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 4b8b52ca09d..b7b3f5b0d40 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -493,6 +493,7 @@ block: if (netif_running (dev->net) && !test_bit (EVENT_RX_HALT, &dev->flags)) { rx_submit (dev, urb, GFP_ATOMIC); + usb_mark_last_busy(dev->udev); return; } usb_free_urb (urb); @@ -589,6 +590,14 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) entry = (struct skb_data *) skb->cb; urb = entry->urb; + /* + * Get reference count of the URB to avoid it to be + * freed during usb_unlink_urb, which may trigger + * use-after-free problem inside usb_unlink_urb since + * usb_unlink_urb is always racing with .complete + * handler(include defer_bh). + */ + usb_get_urb(urb); spin_unlock_irqrestore(&q->lock, flags); // during some PM-driven resume scenarios, // these (async) unlinks complete immediately @@ -597,6 +606,7 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) netdev_dbg(dev->net, "unlink urb err, %d\n", retval); else count++; + usb_put_urb(urb); spin_lock_irqsave(&q->lock, flags); } spin_unlock_irqrestore (&q->lock, flags); @@ -1028,7 +1038,6 @@ static void tx_complete (struct urb *urb) } usb_autopm_put_interface_async(dev->intf); - urb->dev = NULL; entry->state = tx_done; defer_bh(dev, skb, &dev->txq); } diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c index c5b1d199e0b..b25c01be0d9 100644 --- a/drivers/net/wireless/iwlegacy/3945.c +++ b/drivers/net/wireless/iwlegacy/3945.c @@ -499,7 +499,8 @@ il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb, le32_to_cpu(rx_end->status), stats); skb_add_rx_frag(skb, 0, rxb->page, - (void *)rx_hdr->payload - (void *)pkt, len); + (void *)rx_hdr->payload - (void *)pkt, len, + len); il_update_stats(il, false, fc, len); memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 7b54dbb338b..17f1c685318 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -596,7 +596,8 @@ il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, return; } - skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len); + skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len, + len); il_update_stats(il, false, fc, len); memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c index 44c6f712b77..f4b84d1596e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c @@ -796,7 +796,7 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, offset = (void *)hdr - rxb_addr(rxb); p = rxb_steal_page(rxb); - skb_add_rx_frag(skb, 0, p, offset, len); + skb_add_rx_frag(skb, 0, p, offset, len, len); iwl_update_stats(priv, false, fc, len); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index b1617503232..663b32c2e93 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -47,6 +47,7 @@ #include <xen/xenbus.h> #include <xen/events.h> #include <xen/page.h> +#include <xen/platform_pci.h> #include <xen/grant_table.h> #include <xen/interface/io/netif.h> @@ -1964,6 +1965,9 @@ static int __init netif_init(void) if (xen_initial_domain()) return 0; + if (!xen_platform_pci_unplug) + return -ENODEV; + printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n"); return xenbus_register_frontend(&netfront_driver); |