diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/wireless/libertas/cmd.c | 26 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/defs.h | 21 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/dev.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/host.h | 3 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/hostcmd.h | 28 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/main.c | 44 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/rx.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/tx.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/types.h | 2 |
9 files changed, 116 insertions, 50 deletions
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 8c3605cdc64..c455b9abbfc 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -119,6 +119,19 @@ int lbs_update_hw_spec(struct lbs_private *priv) lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n", cmd.hwifversion, cmd.version); + /* Determine mesh_fw_ver from fwrelease and fwcapinfo */ + /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */ + /* 5.110.22 have mesh command with 0xa3 command id */ + /* 10.0.0.p0 FW brings in mesh config command with different id */ + /* Check FW version MSB and initialize mesh_fw_ver */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) + priv->mesh_fw_ver = MESH_FW_OLD; + else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) && + (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) + priv->mesh_fw_ver = MESH_FW_NEW; + else + priv->mesh_fw_ver = MESH_NONE; + /* Clamp region code to 8-bit since FW spec indicates that it should * only ever be 8-bit, even though the field size is 16-bit. Some firmware * returns non-zero high 8 bits here. @@ -1036,17 +1049,26 @@ static int __lbs_mesh_config_send(struct lbs_private *priv, uint16_t action, uint16_t type) { int ret; + u16 command = CMD_MESH_CONFIG_OLD; lbs_deb_enter(LBS_DEB_CMD); - cmd->hdr.command = cpu_to_le16(CMD_MESH_CONFIG); + /* + * Command id is 0xac for v10 FW along with mesh interface + * id in bits 14-13-12. + */ + if (priv->mesh_fw_ver == MESH_FW_NEW) + command = CMD_MESH_CONFIG | + (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET); + + cmd->hdr.command = cpu_to_le16(command); cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config)); cmd->hdr.result = 0; cmd->type = cpu_to_le16(type); cmd->action = cpu_to_le16(action); - ret = lbs_cmd_with_response(priv, CMD_MESH_CONFIG, cmd); + ret = lbs_cmd_with_response(priv, command, cmd); lbs_deb_leave(LBS_DEB_CMD); return ret; diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h index e8dfde39abf..48da157d6cd 100644 --- a/drivers/net/wireless/libertas/defs.h +++ b/drivers/net/wireless/libertas/defs.h @@ -227,6 +227,20 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define TxPD_CONTROL_WDS_FRAME (1<<17) #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME +/** Mesh interface ID */ +#define MESH_IFACE_ID 0x0001 +/** Mesh id should be in bits 14-13-12 */ +#define MESH_IFACE_BIT_OFFSET 0x000c +/** Mesh enable bit in FW capability */ +#define MESH_CAPINFO_ENABLE_MASK (1<<16) + +/** FW definition from Marvell v5 */ +#define MRVL_FW_V5 (0x05) +/** FW definition from Marvell v10 */ +#define MRVL_FW_V10 (0x0a) +/** FW major revision definition */ +#define MRVL_FW_MAJOR_REV(x) ((x)>>24) + /** RxPD status */ #define MRVDRV_RXPD_STATUS_OK 0x0001 @@ -380,6 +394,13 @@ enum KEY_INFO_WPA { KEY_INFO_WPA_ENABLED = 0x04 }; +/** mesh_fw_ver */ +enum _mesh_fw_ver { + MESH_NONE = 0, /* MESH is not supported */ + MESH_FW_OLD, /* MESH is supported in FW V5 */ + MESH_FW_NEW, /* MESH is supported in FW V10 and newer */ +}; + /* Default values for fwt commands. */ #define FWT_DEFAULT_METRIC 0 #define FWT_DEFAULT_DIR 1 diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index 27e81fd97c9..cbaafa653b6 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -101,6 +101,7 @@ struct lbs_mesh_stats { /** Private structure for the MV device */ struct lbs_private { int mesh_open; + int mesh_fw_ver; int infra_open; int mesh_autostart_enabled; diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index d4457ef808a..8ff8ac9d817 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -83,7 +83,8 @@ #define CMD_FWT_ACCESS 0x0095 #define CMD_802_11_MONITOR_MODE 0x0098 #define CMD_MESH_ACCESS 0x009b -#define CMD_MESH_CONFIG 0x00a3 +#define CMD_MESH_CONFIG_OLD 0x00a3 +#define CMD_MESH_CONFIG 0x00ac #define CMD_SET_BOOT2_VER 0x00a5 #define CMD_802_11_BEACON_CTRL 0x00b0 diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index a899aeb676b..391c54ab2b0 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -13,8 +13,19 @@ /* TxPD descriptor */ struct txpd { - /* Current Tx packet status */ - __le32 tx_status; + /* union to cope up with later FW revisions */ + union { + /* Current Tx packet status */ + __le32 tx_status; + struct { + /* BSS type: client, AP, etc. */ + u8 bss_type; + /* BSS number */ + u8 bss_num; + /* Reserved */ + __le16 reserved; + } bss; + } u; /* Tx control */ __le32 tx_control; __le32 tx_packet_location; @@ -36,8 +47,17 @@ struct txpd { /* RxPD Descriptor */ struct rxpd { - /* Current Rx packet status */ - __le16 status; + /* union to cope up with later FW revisions */ + union { + /* Current Rx packet status */ + __le16 status; + struct { + /* BSS type: client, AP, etc. */ + u8 bss_type; + /* BSS number */ + u8 bss_num; + } bss; + } u; /* SNR */ u8 snr; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 8ae935ac32f..89575e44801 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -1307,8 +1307,10 @@ int lbs_start_card(struct lbs_private *priv) lbs_update_channel(priv); - /* 5.0.16p0 is known to NOT support any mesh */ - if (priv->fwrelease > 0x05001000) { + /* Check mesh FW version and appropriately send the mesh start + * command + */ + if (priv->mesh_fw_ver == MESH_FW_OLD) { /* Enable mesh, if supported, and work out which TLV it uses. 0x100 + 291 is an unofficial value used in 5.110.20.pXX 0x100 + 37 is the official value used in 5.110.21.pXX @@ -1322,27 +1324,35 @@ int lbs_start_card(struct lbs_private *priv) It's just that 5.110.20.pXX will not have done anything useful */ - priv->mesh_tlv = 0x100 + 291; + priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID; if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, priv->curbssparams.channel)) { - priv->mesh_tlv = 0x100 + 37; + priv->mesh_tlv = TLV_TYPE_MESH_ID; if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, priv->curbssparams.channel)) priv->mesh_tlv = 0; } - if (priv->mesh_tlv) { - lbs_add_mesh(priv); - - if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) - lbs_pr_err("cannot register lbs_mesh attribute\n"); - - /* While rtap isn't related to mesh, only mesh-enabled - * firmware implements the rtap functionality via - * CMD_802_11_MONITOR_MODE. - */ - if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) - lbs_pr_err("cannot register lbs_rtap attribute\n"); - } + } else if (priv->mesh_fw_ver == MESH_FW_NEW) { + /* 10.0.0.pXX new firmwares should succeed with TLV + * 0x100+37; Do not invoke command with old TLV. + */ + priv->mesh_tlv = TLV_TYPE_MESH_ID; + if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, + priv->curbssparams.channel)) + priv->mesh_tlv = 0; + } + if (priv->mesh_tlv) { + lbs_add_mesh(priv); + + if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) + lbs_pr_err("cannot register lbs_mesh attribute\n"); + + /* While rtap isn't related to mesh, only mesh-enabled + * firmware implements the rtap functionality via + * CMD_802_11_MONITOR_MODE. + */ + if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) + lbs_pr_err("cannot register lbs_rtap attribute\n"); } lbs_debugfs_init_one(priv, dev); diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 8e669775cb5..820c22d9220 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -160,8 +160,15 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) p_rx_pkt = (struct rxpackethdr *) skb->data; p_rx_pd = &p_rx_pkt->rx_pd; - if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME)) - dev = priv->mesh_dev; + if (priv->mesh_dev) { + if (priv->mesh_fw_ver == MESH_FW_OLD) { + if (p_rx_pd->rx_control & RxPD_MESH_FRAME) + dev = priv->mesh_dev; + } else if (priv->mesh_fw_ver == MESH_FW_NEW) { + if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID) + dev = priv->mesh_dev; + } + } lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, min_t(unsigned int, skb->len, 100)); @@ -174,18 +181,6 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) goto done; } - /* - * Check rxpd status and update 802.3 stat, - */ - if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) { - lbs_deb_rx("rx err: frame received with bad status\n"); - lbs_pr_alert("rxpd not ok\n"); - dev->stats.rx_errors++; - ret = 0; - dev_kfree_skb(skb); - goto done; - } - lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); @@ -334,14 +329,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, goto done; } - /* - * Check rxpd status and update 802.3 stat, - */ - if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) { - //lbs_deb_rx("rx err: frame received with bad status\n"); - dev->stats.rx_errors++; - } - lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); @@ -353,8 +340,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, radiotap_hdr.hdr.it_pad = 0; radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); - if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) - radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS; radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); /* XXX must check no carryout */ radiotap_hdr.antsignal = prxpd->snr + prxpd->nf; diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c index f10aa39a6b6..160cfd8311c 100644 --- a/drivers/net/wireless/libertas/tx.c +++ b/drivers/net/wireless/libertas/tx.c @@ -132,8 +132,12 @@ int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) txpd->tx_packet_length = cpu_to_le16(pkt_len); txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); - if (dev == priv->mesh_dev) - txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME); + if (dev == priv->mesh_dev) { + if (priv->mesh_fw_ver == MESH_FW_OLD) + txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME); + else if (priv->mesh_fw_ver == MESH_FW_NEW) + txpd->u.bss.bss_num = MESH_IFACE_ID; + } lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd)); diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h index fb7a2d1a252..de03b9c9c20 100644 --- a/drivers/net/wireless/libertas/types.h +++ b/drivers/net/wireless/libertas/types.h @@ -94,6 +94,8 @@ struct ieeetypes_assocrsp { #define TLV_TYPE_TSFTIMESTAMP (PROPRIETARY_TLV_BASE_ID + 19) #define TLV_TYPE_RSSI_HIGH (PROPRIETARY_TLV_BASE_ID + 22) #define TLV_TYPE_SNR_HIGH (PROPRIETARY_TLV_BASE_ID + 23) +#define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37) +#define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291) /** TLV related data structures*/ struct mrvlietypesheader { |