summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/8139too.c86
-rw-r--r--drivers/net/Kconfig17
-rw-r--r--drivers/net/Makefile7
-rw-r--r--drivers/net/bonding/Makefile2
-rw-r--r--drivers/net/bonding/bond_3ad.c106
-rw-r--r--drivers/net/bonding/bond_3ad.h13
-rw-r--r--drivers/net/bonding/bond_alb.c75
-rw-r--r--drivers/net/bonding/bond_alb.h9
-rw-r--r--drivers/net/bonding/bond_main.c781
-rw-r--r--drivers/net/bonding/bond_sysfs.c1358
-rw-r--r--drivers/net/bonding/bonding.h52
-rw-r--r--drivers/net/chelsio/sge.c19
-rw-r--r--drivers/net/chelsio/sge.h2
-rw-r--r--drivers/net/e1000/e1000.h4
-rw-r--r--drivers/net/e1000/e1000_ethtool.c111
-rw-r--r--drivers/net/e1000/e1000_hw.c67
-rw-r--r--drivers/net/e1000/e1000_hw.h4
-rw-r--r--drivers/net/e1000/e1000_main.c64
-rw-r--r--drivers/net/gianfar.c231
-rw-r--r--drivers/net/gianfar.h69
-rw-r--r--drivers/net/gianfar_ethtool.c2
-rw-r--r--drivers/net/gianfar_mii.h1
-rw-r--r--drivers/net/gianfar_sysfs.c311
-rw-r--r--drivers/net/irda/irda-usb.c1
-rw-r--r--drivers/net/irda/stir4200.c1
-rw-r--r--drivers/net/ixp2000/Kconfig6
-rw-r--r--drivers/net/ixp2000/Makefile3
-rw-r--r--drivers/net/ixp2000/caleb.c137
-rw-r--r--drivers/net/ixp2000/caleb.h22
-rw-r--r--drivers/net/ixp2000/enp2611.c245
-rw-r--r--drivers/net/ixp2000/ixp2400-msf.c213
-rw-r--r--drivers/net/ixp2000/ixp2400-msf.h115
-rw-r--r--drivers/net/ixp2000/ixp2400_rx.uc408
-rw-r--r--drivers/net/ixp2000/ixp2400_rx.ucode130
-rw-r--r--drivers/net/ixp2000/ixp2400_tx.uc272
-rw-r--r--drivers/net/ixp2000/ixp2400_tx.ucode98
-rw-r--r--drivers/net/ixp2000/ixpdev.c421
-rw-r--r--drivers/net/ixp2000/ixpdev.h27
-rw-r--r--drivers/net/ixp2000/ixpdev_priv.h57
-rw-r--r--drivers/net/ixp2000/pm3386.c334
-rw-r--r--drivers/net/ixp2000/pm3386.h28
-rw-r--r--drivers/net/ns83820.c1
-rw-r--r--drivers/net/pcmcia/3c574_cs.c124
-rw-r--r--drivers/net/pcmcia/3c589_cs.c136
-rw-r--r--drivers/net/pcmcia/axnet_cs.c128
-rw-r--r--drivers/net/pcmcia/com20020_cs.c142
-rw-r--r--drivers/net/pcmcia/fmvj18x_cs.c128
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c152
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c134
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c129
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c195
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c158
-rw-r--r--drivers/net/phy/Kconfig2
-rw-r--r--drivers/net/plip.c2
-rw-r--r--drivers/net/pppoe.c31
-rw-r--r--drivers/net/pppox.c10
-rw-r--r--drivers/net/s2io.c200
-rw-r--r--drivers/net/s2io.h3
-rw-r--r--drivers/net/sis900.c73
-rw-r--r--drivers/net/sis900.h45
-rw-r--r--drivers/net/sk98lin/Makefile3
-rw-r--r--drivers/net/sk98lin/h/skdrv2nd.h9
-rw-r--r--drivers/net/sk98lin/h/skvpd.h8
-rw-r--r--drivers/net/sk98lin/skethtool.c48
-rw-r--r--drivers/net/sk98lin/skge.c213
-rw-r--r--drivers/net/sk98lin/skproc.c265
-rw-r--r--drivers/net/skge.c81
-rw-r--r--drivers/net/skge.h73
-rw-r--r--drivers/net/sky2.c3262
-rw-r--r--drivers/net/sky2.h1922
-rw-r--r--drivers/net/tg3.c3
-rw-r--r--drivers/net/tlan.c4
-rw-r--r--drivers/net/wan/.gitignore1
-rw-r--r--drivers/net/wan/lmc/lmc_prot.h15
-rw-r--r--drivers/net/wireless/Kconfig6
-rw-r--r--drivers/net/wireless/airo.c15
-rw-r--r--drivers/net/wireless/airo_cs.c161
-rw-r--r--drivers/net/wireless/atmel.c1490
-rw-r--r--drivers/net/wireless/atmel_cs.c156
-rw-r--r--drivers/net/wireless/hostap/Makefile1
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c156
-rw-r--r--drivers/net/wireless/hostap/hostap_main.c (renamed from drivers/net/wireless/hostap/hostap.c)0
-rw-r--r--drivers/net/wireless/ipw2100.c40
-rw-r--r--drivers/net/wireless/ipw2100.h2
-rw-r--r--drivers/net/wireless/ipw2200.c36
-rw-r--r--drivers/net/wireless/ipw2200.h6
-rw-r--r--drivers/net/wireless/netwave_cs.c184
-rw-r--r--drivers/net/wireless/orinoco_cs.c208
-rw-r--r--drivers/net/wireless/ray_cs.c154
-rw-r--r--drivers/net/wireless/spectrum_cs.c175
-rw-r--r--drivers/net/wireless/wavelan_cs.c183
-rw-r--r--drivers/net/wireless/wavelan_cs.p.h11
-rw-r--r--drivers/net/wireless/wl3501_cs.c133
93 files changed, 12284 insertions, 4442 deletions
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 30bee11c48b..d2102a27d30 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -586,16 +586,16 @@ struct rtl8139_private {
dma_addr_t tx_bufs_dma;
signed char phys[4]; /* MII device addresses. */
char twistie, twist_row, twist_col; /* Twister tune state. */
- unsigned int default_port:4; /* Last dev->if_port value. */
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
spinlock_t lock;
spinlock_t rx_lock;
chip_t chipset;
- pid_t thr_pid;
- wait_queue_head_t thr_wait;
- struct completion thr_exited;
u32 rx_config;
struct rtl_extra_stats xstats;
- int time_to_die;
+
+ struct work_struct thread;
+
struct mii_if_info mii;
unsigned int regs_len;
unsigned long fifo_copy_timeout;
@@ -620,7 +620,7 @@ static int rtl8139_open (struct net_device *dev);
static int mdio_read (struct net_device *dev, int phy_id, int location);
static void mdio_write (struct net_device *dev, int phy_id, int location,
int val);
-static void rtl8139_start_thread(struct net_device *dev);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
static void rtl8139_tx_timeout (struct net_device *dev);
static void rtl8139_init_ring (struct net_device *dev);
static int rtl8139_start_xmit (struct sk_buff *skb,
@@ -637,6 +637,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
static void rtl8139_set_rx_mode (struct net_device *dev);
static void __set_rx_mode (struct net_device *dev);
static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (void *_data);
static struct ethtool_ops rtl8139_ethtool_ops;
/* write MMIO register, with flush */
@@ -1007,8 +1008,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
(debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
spin_lock_init (&tp->lock);
spin_lock_init (&tp->rx_lock);
- init_waitqueue_head (&tp->thr_wait);
- init_completion (&tp->thr_exited);
+ INIT_WORK(&tp->thread, rtl8139_thread, dev);
tp->mii.dev = dev;
tp->mii.mdio_read = mdio_read;
tp->mii.mdio_write = mdio_write;
@@ -1345,7 +1345,7 @@ static int rtl8139_open (struct net_device *dev)
dev->irq, RTL_R8 (MediaStatus),
tp->mii.full_duplex ? "full" : "half");
- rtl8139_start_thread(dev);
+ rtl8139_start_thread(tp);
return 0;
}
@@ -1594,55 +1594,43 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
RTL_R8 (Config1));
}
-static int rtl8139_thread (void *data)
+static void rtl8139_thread (void *_data)
{
- struct net_device *dev = data;
+ struct net_device *dev = _data;
struct rtl8139_private *tp = netdev_priv(dev);
- unsigned long timeout;
-
- daemonize("%s", dev->name);
- allow_signal(SIGTERM);
-
- while (1) {
- timeout = next_tick;
- do {
- timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
- /* make swsusp happy with our thread */
- try_to_freeze();
- } while (!signal_pending (current) && (timeout > 0));
-
- if (signal_pending (current)) {
- flush_signals(current);
- }
+ unsigned long thr_delay;
- if (tp->time_to_die)
- break;
-
- if (rtnl_lock_interruptible ())
- break;
+ if (rtnl_shlock_nowait() == 0) {
rtl8139_thread_iter (dev, tp, tp->mmio_addr);
rtnl_unlock ();
+
+ thr_delay = next_tick;
+ } else {
+ /* unlikely race. mitigate with fast poll. */
+ thr_delay = HZ / 2;
}
- complete_and_exit (&tp->thr_exited, 0);
+ schedule_delayed_work(&tp->thread, thr_delay);
}
-static void rtl8139_start_thread(struct net_device *dev)
+static void rtl8139_start_thread(struct rtl8139_private *tp)
{
- struct rtl8139_private *tp = netdev_priv(dev);
-
- tp->thr_pid = -1;
tp->twistie = 0;
- tp->time_to_die = 0;
if (tp->chipset == CH_8139_K)
tp->twistie = 1;
else if (tp->drv_flags & HAS_LNK_CHNG)
return;
- tp->thr_pid = kernel_thread(rtl8139_thread, dev, CLONE_FS|CLONE_FILES);
- if (tp->thr_pid < 0) {
- printk (KERN_WARNING "%s: unable to start kernel thread\n",
- dev->name);
+ tp->have_thread = 1;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static void rtl8139_stop_thread(struct rtl8139_private *tp)
+{
+ if (tp->have_thread) {
+ cancel_rearming_delayed_work(&tp->thread);
+ tp->have_thread = 0;
}
}
@@ -2224,22 +2212,12 @@ static int rtl8139_close (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
- int ret = 0;
unsigned long flags;
netif_stop_queue (dev);
- if (tp->thr_pid >= 0) {
- tp->time_to_die = 1;
- wmb();
- ret = kill_proc (tp->thr_pid, SIGTERM, 1);
- if (ret) {
- printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
- return ret;
- }
- wait_for_completion (&tp->thr_exited);
- }
-
+ rtl8139_stop_thread(tp);
+
if (netif_msg_ifdown(tp))
printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
dev->name, RTL_R16 (IntrStatus));
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ebd7313d7fc..e2fa29b612c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1901,6 +1901,8 @@ config E1000_NAPI
If in doubt, say N.
+source "drivers/net/ixp2000/Kconfig"
+
config MYRI_SBUS
tristate "MyriCOM Gigabit Ethernet support"
depends on SBUS
@@ -2008,7 +2010,18 @@ config SKGE
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
-
+
+
+config SKY2
+ tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This driver support the Marvell Yukon 2 Gigabit Ethernet adapter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sky2. This is recommended.
+
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
depends on PCI
@@ -2120,7 +2133,7 @@ config BNX2
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
- depends on PCI && PPC_BPA
+ depends on PCI && PPC_CELL
help
This driver supports the Gigabit Ethernet chips present on the
Cell Processor-Based Blades from IBM.
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4cffd34442a..b74a7cb5bae 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,7 +13,10 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
-gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o
+gianfar_driver-objs := gianfar.o \
+ gianfar_ethtool.o \
+ gianfar_mii.o \
+ gianfar_sysfs.o
#
# link order important here
@@ -59,6 +62,7 @@ spidernet-y += spider_net.o spider_net_ethtool.o sungem_phy.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKGE) += skge.o
+obj-$(CONFIG_SKY2) += sky2.o
obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
@@ -202,6 +206,7 @@ obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile
index cf50384b469..5cdae2bc055 100644
--- a/drivers/net/bonding/Makefile
+++ b/drivers/net/bonding/Makefile
@@ -4,5 +4,5 @@
obj-$(CONFIG_BONDING) += bonding.o
-bonding-objs := bond_main.o bond_3ad.o bond_alb.o
+bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index d2f34d5a808..f3f5825469d 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -18,38 +18,6 @@
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
- *
- * Changes:
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Amir Noam <amir.noam at intel dot com>
- * - Added support for lacp_rate module param.
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Based on discussion on mailing list, changed locking scheme
- * to use lock/unlock or lock_bh/unlock_bh appropriately instead
- * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing
- * hidden bugs and solves system hangs that occurred due to the fact
- * that holding lock_irqsave doesn't prevent softirqs from running.
- * This also increases total throughput since interrupts are not
- * blocked on each transmitted packets or monitor timeout.
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Renamed bond_3ad_link_status_changed() to
- * bond_3ad_handle_link_change() for compatibility with TLB.
- *
- * 2003/05/20 - Amir Noam <amir.noam at intel dot com>
- * - Fix long fail over time when releasing last slave of an active
- * aggregator - send LACPDU on unbind of slave to tell partner this
- * port is no longer aggregatable.
- *
- * 2003/06/25 - Tsippy Mendelson <tsippy.mendelson at intel dot com>
- * - Send LACPDU as highest priority packet to further fix the above
- * problem on very high Tx traffic load where packets may get dropped
- * by the slave.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
*/
//#define BONDING_DEBUG 1
@@ -1198,10 +1166,10 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
// detect loopback situation
if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
// INFO_RECEIVED_LOOPBACK_FRAMES
- printk(KERN_ERR DRV_NAME ": An illegal loopback occurred on adapter (%s)\n",
- port->slave->dev->name);
- printk(KERN_ERR "Check the configuration to verify that all Adapters "
- "are connected to 802.3ad compliant switch ports\n");
+ printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on "
+ "adapter (%s). Check the configuration to verify that all "
+ "Adapters are connected to 802.3ad compliant switch ports\n",
+ port->slave->dev->master->name, port->slave->dev->name);
__release_rx_machine_lock(port);
return;
}
@@ -1378,8 +1346,9 @@ static void ad_port_selection_logic(struct port *port)
}
}
if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
- printk(KERN_WARNING DRV_NAME ": Warning: Port %d (on %s) was "
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was "
"related to aggregator %d but was not on its port list\n",
+ port->slave->dev->master->name,
port->actor_port_number, port->slave->dev->name,
port->aggregator->aggregator_identifier);
}
@@ -1450,7 +1419,8 @@ static void ad_port_selection_logic(struct port *port)
dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
} else {
- printk(KERN_ERR DRV_NAME ": Port %d (on %s) did not find a suitable aggregator\n",
+ printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n",
+ port->slave->dev->master->name,
port->actor_port_number, port->slave->dev->name);
}
}
@@ -1582,8 +1552,9 @@ static void ad_agg_selection_logic(struct aggregator *aggregator)
// check if any partner replys
if (best_aggregator->is_individual) {
- printk(KERN_WARNING DRV_NAME ": Warning: No 802.3ad response from the link partner "
- "for any adapters in the bond\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from "
+ "the link partner for any adapters in the bond\n",
+ best_aggregator->slave->dev->master->name);
}
// check if there are more than one aggregator
@@ -1915,7 +1886,8 @@ int bond_3ad_bind_slave(struct slave *slave)
struct aggregator *aggregator;
if (bond == NULL) {
- printk(KERN_ERR "The slave %s is not attached to its bond\n", slave->dev->name);
+ printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n",
+ slave->dev->master->name, slave->dev->name);
return -1;
}
@@ -1990,7 +1962,9 @@ void bond_3ad_unbind_slave(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Trying to unbind an uninitialized port on %s\n", slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to "
+ "unbind an uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2021,7 +1995,8 @@ void bond_3ad_unbind_slave(struct slave *slave)
dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier);
if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
- printk(KERN_INFO DRV_NAME ": Removing an active aggregator\n");
+ printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
+ aggregator->slave->dev->master->name);
// select new active aggregator
select_new_active_agg = 1;
}
@@ -2051,15 +2026,17 @@ void bond_3ad_unbind_slave(struct slave *slave)
ad_agg_selection_logic(__get_first_agg(port));
}
} else {
- printk(KERN_WARNING DRV_NAME ": Warning: unbinding aggregator, "
- "and could not find a new aggregator for its ports\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, "
+ "and could not find a new aggregator for its ports\n",
+ slave->dev->master->name);
}
} else { // in case that the only port related to this aggregator is the one we want to remove
select_new_active_agg = aggregator->is_active;
// clear the aggregator
ad_clear_agg(aggregator);
if (select_new_active_agg) {
- printk(KERN_INFO "Removing an active aggregator\n");
+ printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
+ slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
}
@@ -2085,7 +2062,8 @@ void bond_3ad_unbind_slave(struct slave *slave)
// clear the aggregator
ad_clear_agg(temp_aggregator);
if (select_new_active_agg) {
- printk(KERN_INFO "Removing an active aggregator\n");
+ printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
+ slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
}
@@ -2131,7 +2109,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond)
// select the active aggregator for the bond
if ((port = __get_first_port(bond))) {
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: bond's first port is uninitialized\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is "
+ "uninitialized\n", bond->dev->name);
goto re_arm;
}
@@ -2143,7 +2122,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond)
// for each port run the state machines
for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: Found an uninitialized port\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized "
+ "port\n", bond->dev->name);
goto re_arm;
}
@@ -2184,7 +2164,8 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u
port = &(SLAVE_AD_INFO(slave).port);
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: port of slave %s is uninitialized\n", slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is "
+ "uninitialized\n", slave->dev->name, slave->dev->master->name);
return;
}
@@ -2230,8 +2211,9 @@ void bond_3ad_adapter_speed_changed(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: speed changed for uninitialized port on %s\n",
- slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": Warning: %s: speed "
+ "changed for uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2257,8 +2239,9 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: duplex changed for uninitialized port on %s\n",
- slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed "
+ "for uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2285,8 +2268,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: link status changed for uninitialized port on %s\n",
- slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for "
+ "uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2363,7 +2347,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
}
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
- printk(KERN_DEBUG "ERROR: bond_3ad_get_active_agg_info failed\n");
+ printk(KERN_DEBUG DRV_NAME ": %s: Error: "
+ "bond_3ad_get_active_agg_info failed\n", dev->name);
goto out;
}
@@ -2372,7 +2357,9 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
if (slaves_in_agg == 0) {
/*the aggregator is empty*/
- printk(KERN_DEBUG "ERROR: active aggregator is empty\n");
+ printk(KERN_DEBUG DRV_NAME ": %s: Error: active "
+ "aggregator is empty\n",
+ dev->name);
goto out;
}
@@ -2390,7 +2377,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
}
if (slave_agg_no >= 0) {
- printk(KERN_ERR DRV_NAME ": Error: Couldn't find a slave to tx on for aggregator ID %d\n", agg_id);
+ printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on "
+ "for aggregator ID %d\n", dev->name, agg_id);
goto out;
}
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index 673a30af566..5ee2cef5b03 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -18,19 +18,6 @@
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
- *
- * Changes:
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Amir Noam <amir.noam at intel dot com>
- * - Added support for lacp_rate module param.
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Renamed bond_3ad_link_status_changed() to
- * bond_3ad_handle_link_change() for compatibility with TLB.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
*/
#ifndef __BOND_3AD_H__
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index f8fce396119..854ddfb90da 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -18,25 +18,6 @@
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
- *
- * Changes:
- *
- * 2003/06/25 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Fixed signed/unsigned calculation errors that caused load sharing
- * to collapse to one slave under very heavy UDP Tx stress.
- *
- * 2003/08/06 - Amir Noam <amir.noam at intel dot com>
- * - Add support for setting bond's MAC address with special
- * handling required for ALB/TLB.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
- *
- * 2003/12/30 - Amir Noam <amir.noam at intel dot com>
- * - Fixed: Cannot remove and re-enslave the original active slave.
- *
- * 2004/01/14 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Add capability to tag self generated packets in ALB/TLB modes.
*/
//#define BONDING_DEBUG 1
@@ -198,20 +179,21 @@ static int tlb_initialize(struct bonding *bond)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
int size = TLB_HASH_TABLE_SIZE * sizeof(struct tlb_client_info);
+ struct tlb_client_info *new_hashtbl;
int i;
spin_lock_init(&(bond_info->tx_hashtbl_lock));
- _lock_tx_hashtbl(bond);
-
- bond_info->tx_hashtbl = kmalloc(size, GFP_KERNEL);
- if (!bond_info->tx_hashtbl) {
+ new_hashtbl = kmalloc(size, GFP_KERNEL);
+ if (!new_hashtbl) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: Failed to allocate TLB hash table\n",
+ ": %s: Error: Failed to allocate TLB hash table\n",
bond->dev->name);
- _unlock_tx_hashtbl(bond);
return -1;
}
+ _lock_tx_hashtbl(bond);
+
+ bond_info->tx_hashtbl = new_hashtbl;
memset(bond_info->tx_hashtbl, 0, size);
@@ -513,7 +495,8 @@ static void rlb_update_client(struct rlb_client_info *client_info)
client_info->mac_dst);
if (!skb) {
printk(KERN_ERR DRV_NAME
- ": Error: failed to create an ARP packet\n");
+ ": %s: Error: failed to create an ARP packet\n",
+ client_info->slave->dev->master->name);
continue;
}
@@ -523,7 +506,8 @@ static void rlb_update_client(struct rlb_client_info *client_info)
skb = vlan_put_tag(skb, client_info->vlan_id);
if (!skb) {
printk(KERN_ERR DRV_NAME
- ": Error: failed to insert VLAN tag\n");
+ ": %s: Error: failed to insert VLAN tag\n",
+ client_info->slave->dev->master->name);
continue;
}
}
@@ -606,8 +590,9 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, u32 src_ip)
if (!client_info->slave) {
printk(KERN_ERR DRV_NAME
- ": Error: found a client with no channel in "
- "the client's hash table\n");
+ ": %s: Error: found a client with no channel in "
+ "the client's hash table\n",
+ bond->dev->name);
continue;
}
/*update all clients using this src_ip, that are not assigned
@@ -797,21 +782,22 @@ static int rlb_initialize(struct bonding *bond)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
struct packet_type *pk_type = &(BOND_ALB_INFO(bond).rlb_pkt_type);
+ struct rlb_client_info *new_hashtbl;
int size = RLB_HASH_TABLE_SIZE * sizeof(struct rlb_client_info);
int i;
spin_lock_init(&(bond_info->rx_hashtbl_lock));
- _lock_rx_hashtbl(bond);
-
- bond_info->rx_hashtbl = kmalloc(size, GFP_KERNEL);
- if (!bond_info->rx_hashtbl) {
+ new_hashtbl = kmalloc(size, GFP_KERNEL);
+ if (!new_hashtbl) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: Failed to allocate RLB hash table\n",
+ ": %s: Error: Failed to allocate RLB hash table\n",
bond->dev->name);
- _unlock_rx_hashtbl(bond);
return -1;
}
+ _lock_rx_hashtbl(bond);
+
+ bond_info->rx_hashtbl = new_hashtbl;
bond_info->rx_hashtbl_head = RLB_NULL_INDEX;
@@ -927,7 +913,8 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
skb = vlan_put_tag(skb, vlan->vlan_id);
if (!skb) {
printk(KERN_ERR DRV_NAME
- ": Error: failed to insert VLAN tag\n");
+ ": %s: Error: failed to insert VLAN tag\n",
+ bond->dev->name);
continue;
}
}
@@ -956,11 +943,11 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw)
s_addr.sa_family = dev->type;
if (dev_set_mac_address(dev, &s_addr)) {
printk(KERN_ERR DRV_NAME
- ": Error: dev_set_mac_address of dev %s failed! ALB "
+ ": %s: Error: dev_set_mac_address of dev %s failed! ALB "
"mode requires that the base driver support setting "
"the hw address also when the network device's "
"interface is open\n",
- dev->name);
+ dev->master->name, dev->name);
return -EOPNOTSUPP;
}
return 0;
@@ -1153,16 +1140,16 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
bond->alb_info.rlb_enabled);
printk(KERN_WARNING DRV_NAME
- ": Warning: the hw address of slave %s is in use by "
+ ": %s: Warning: the hw address of slave %s is in use by "
"the bond; giving it the hw address of %s\n",
- slave->dev->name, free_mac_slave->dev->name);
+ bond->dev->name, slave->dev->name, free_mac_slave->dev->name);
} else if (has_bond_addr) {
printk(KERN_ERR DRV_NAME
- ": Error: the hw address of slave %s is in use by the "
+ ": %s: Error: the hw address of slave %s is in use by the "
"bond; couldn't find a slave with a free hw address to "
"give it (this should not have happened)\n",
- slave->dev->name);
+ bond->dev->name, slave->dev->name);
return -EFAULT;
}
@@ -1250,6 +1237,8 @@ int bond_alb_initialize(struct bonding *bond, int rlb_enabled)
tlb_deinitialize(bond);
return res;
}
+ } else {
+ bond->alb_info.rlb_enabled = 0;
}
return 0;
@@ -1409,7 +1398,7 @@ void bond_alb_monitor(struct bonding *bond)
read_lock(&bond->curr_slave_lock);
bond_for_each_slave(bond, slave, i) {
- alb_send_learning_packets(slave,slave->dev->dev_addr);
+ alb_send_learning_packets(slave, slave->dev->dev_addr);
}
read_unlock(&bond->curr_slave_lock);
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index e4091cd8d65..28f2a2fd1b5 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -18,15 +18,6 @@
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
- *
- * Changes:
- *
- * 2003/08/06 - Amir Noam <amir.noam at intel dot com>
- * - Add support for setting bond's MAC address with special
- * handling required for ALB/TLB.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
*/
#ifndef __BOND_ALB_H__
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 94cec3cf2a1..2582d98ef5c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -29,466 +29,6 @@
* b: if a hw mac address already is there, eth0's hw mac address
* will then be set from bond0.
*
- * v0.1 - first working version.
- * v0.2 - changed stats to be calculated by summing slaves stats.
- *
- * Changes:
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- * - fix leaks on failure at bond_init
- *
- * 2000/09/30 - Willy Tarreau <willy at meta-x.org>
- * - added trivial code to release a slave device.
- * - fixed security bug (CAP_NET_ADMIN not checked)
- * - implemented MII link monitoring to disable dead links :
- * All MII capable slaves are checked every <miimon> milliseconds
- * (100 ms seems good). This value can be changed by passing it to
- * insmod. A value of zero disables the monitoring (default).
- * - fixed an infinite loop in bond_xmit_roundrobin() when there's no
- * good slave.
- * - made the code hopefully SMP safe
- *
- * 2000/10/03 - Willy Tarreau <willy at meta-x.org>
- * - optimized slave lists based on relevant suggestions from Thomas Davis
- * - implemented active-backup method to obtain HA with two switches:
- * stay as long as possible on the same active interface, while we
- * also monitor the backup one (MII link status) because we want to know
- * if we are able to switch at any time. ( pass "mode=1" to insmod )
- * - lots of stress testings because we need it to be more robust than the
- * wires ! :->
- *
- * 2000/10/09 - Willy Tarreau <willy at meta-x.org>
- * - added up and down delays after link state change.
- * - optimized the slaves chaining so that when we run forward, we never
- * repass through the bond itself, but we can find it by searching
- * backwards. Renders the deletion more difficult, but accelerates the
- * scan.
- * - smarter enslaving and releasing.
- * - finer and more robust SMP locking
- *
- * 2000/10/17 - Willy Tarreau <willy at meta-x.org>
- * - fixed two potential SMP race conditions
- *
- * 2000/10/18 - Willy Tarreau <willy at meta-x.org>
- * - small fixes to the monitoring FSM in case of zero delays
- * 2000/11/01 - Willy Tarreau <willy at meta-x.org>
- * - fixed first slave not automatically used in trunk mode.
- * 2000/11/10 : spelling of "EtherChannel" corrected.
- * 2000/11/13 : fixed a race condition in case of concurrent accesses to ioctl().
- * 2000/12/16 : fixed improper usage of rtnl_exlock_nowait().
- *
- * 2001/1/3 - Chad N. Tindel <ctindel at ieee dot org>
- * - The bonding driver now simulates MII status monitoring, just like
- * a normal network device. It will show that the link is down iff
- * every slave in the bond shows that their links are down. If at least
- * one slave is up, the bond's MII status will appear as up.
- *
- * 2001/2/7 - Chad N. Tindel <ctindel at ieee dot org>
- * - Applications can now query the bond from user space to get
- * information which may be useful. They do this by calling
- * the BOND_INFO_QUERY ioctl. Once the app knows how many slaves
- * are in the bond, it can call the BOND_SLAVE_INFO_QUERY ioctl to
- * get slave specific information (# link failures, etc). See
- * <linux/if_bonding.h> for more details. The structs of interest
- * are ifbond and ifslave.
- *
- * 2001/4/5 - Chad N. Tindel <ctindel at ieee dot org>
- * - Ported to 2.4 Kernel
- *
- * 2001/5/2 - Jeffrey E. Mast <jeff at mastfamily dot com>
- * - When a device is detached from a bond, the slave device is no longer
- * left thinking that is has a master.
- *
- * 2001/5/16 - Jeffrey E. Mast <jeff at mastfamily dot com>
- * - memset did not appropriately initialized the bond rw_locks. Used
- * rwlock_init to initialize to unlocked state to prevent deadlock when
- * first attempting a lock
- * - Called SET_MODULE_OWNER for bond device
- *
- * 2001/5/17 - Tim Anderson <tsa at mvista.com>
- * - 2 paths for releasing for slave release; 1 through ioctl
- * and 2) through close. Both paths need to release the same way.
- * - the free slave in bond release is changing slave status before
- * the free. The netdev_set_master() is intended to change slave state
- * so it should not be done as part of the release process.
- * - Simple rule for slave state at release: only the active in A/B and
- * only one in the trunked case.
- *
- * 2001/6/01 - Tim Anderson <tsa at mvista.com>
- * - Now call dev_close when releasing a slave so it doesn't screw up
- * out routing table.
- *
- * 2001/6/01 - Chad N. Tindel <ctindel at ieee dot org>
- * - Added /proc support for getting bond and slave information.
- * Information is in /proc/net/<bond device>/info.
- * - Changed the locking when calling bond_close to prevent deadlock.
- *
- * 2001/8/05 - Janice Girouard <girouard at us.ibm.com>
- * - correct problem where refcnt of slave is not incremented in bond_ioctl
- * so the system hangs when halting.
- * - correct locking problem when unable to malloc in bond_enslave.
- * - adding bond_xmit_xor logic.
- * - adding multiple bond device support.
- *
- * 2001/8/13 - Erik Habbinga <erik_habbinga at hp dot com>
- * - correct locking problem with rtnl_exlock_nowait
- *
- * 2001/8/23 - Janice Girouard <girouard at us.ibm.com>
- * - bzero initial dev_bonds, to correct oops
- * - convert SIOCDEVPRIVATE to new MII ioctl calls
- *
- * 2001/9/13 - Takao Indoh <indou dot takao at jp dot fujitsu dot com>
- * - Add the BOND_CHANGE_ACTIVE ioctl implementation
- *
- * 2001/9/14 - Mark Huth <mhuth at mvista dot com>
- * - Change MII_LINK_READY to not check for end of auto-negotiation,
- * but only for an up link.
- *
- * 2001/9/20 - Chad N. Tindel <ctindel at ieee dot org>
- * - Add the device field to bonding_t. Previously the net_device
- * corresponding to a bond wasn't available from the bonding_t
- * structure.
- *
- * 2001/9/25 - Janice Girouard <girouard at us.ibm.com>
- * - add arp_monitor for active backup mode
- *
- * 2001/10/23 - Takao Indoh <indou dot takao at jp dot fujitsu dot com>
- * - Various memory leak fixes
- *
- * 2001/11/5 - Mark Huth <mark dot huth at mvista dot com>
- * - Don't take rtnl lock in bond_mii_monitor as it deadlocks under
- * certain hotswap conditions.
- * Note: this same change may be required in bond_arp_monitor ???
- * - Remove possibility of calling bond_sethwaddr with NULL slave_dev ptr
- * - Handle hot swap ethernet interface deregistration events to remove
- * kernel oops following hot swap of enslaved interface
- *
- * 2002/1/2 - Chad N. Tindel <ctindel at ieee dot org>
- * - Restore original slave flags at release time.
- *
- * 2002/02/18 - Erik Habbinga <erik_habbinga at hp dot com>
- * - bond_release(): calling kfree on our_slave after call to
- * bond_restore_slave_flags, not before
- * - bond_enslave(): saving slave flags into original_flags before
- * call to netdev_set_master, so the IFF_SLAVE flag doesn't end
- * up in original_flags
- *
- * 2002/04/05 - Mark Smith <mark.smith at comdev dot cc> and
- * Steve Mead <steve.mead at comdev dot cc>
- * - Port Gleb Natapov's multicast support patchs from 2.4.12
- * to 2.4.18 adding support for multicast.
- *
- * 2002/06/10 - Tony Cureington <tony.cureington * hp_com>
- * - corrected uninitialized pointer (ifr.ifr_data) in bond_check_dev_link;
- * actually changed function to use MIIPHY, then MIIREG, and finally
- * ETHTOOL to determine the link status
- * - fixed bad ifr_data pointer assignments in bond_ioctl
- * - corrected mode 1 being reported as active-backup in bond_get_info;
- * also added text to distinguish type of load balancing (rr or xor)
- * - change arp_ip_target module param from "1-12s" (array of 12 ptrs)
- * to "s" (a single ptr)
- *
- * 2002/08/30 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Removed acquisition of xmit_lock in set_multicast_list; caused
- * deadlock on SMP (lock is held by caller).
- * - Revamped SIOCGMIIPHY, SIOCGMIIREG portion of bond_check_dev_link().
- *
- * 2002/09/18 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Fixed up bond_check_dev_link() (and callers): removed some magic
- * numbers, banished local MII_ defines, wrapped ioctl calls to
- * prevent EFAULT errors
- *
- * 2002/9/30 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - make sure the ip target matches the arp_target before saving the
- * hw address.
- *
- * 2002/9/30 - Dan Eisner <eisner at 2robots dot com>
- * - make sure my_ip is set before taking down the link, since
- * not all switches respond if the source ip is not set.
- *
- * 2002/10/8 - Janice Girouard <girouard at us dot ibm dot com>
- * - read in the local ip address when enslaving a device
- * - add primary support
- * - make sure 2*arp_interval has passed when a new device
- * is brought on-line before taking it down.
- *
- * 2002/09/11 - Philippe De Muyter <phdm at macqel dot be>
- * - Added bond_xmit_broadcast logic.
- * - Added bond_mode() support function.
- *
- * 2002/10/26 - Laurent Deniel <laurent.deniel at free.fr>
- * - allow to register multicast addresses only on active slave
- * (useful in active-backup mode)
- * - add multicast module parameter
- * - fix deletion of multicast groups after unloading module
- *
- * 2002/11/06 - Kameshwara Rayaprolu <kameshwara.rao * wipro_com>
- * - Changes to prevent panic from closing the device twice; if we close
- * the device in bond_release, we must set the original_flags to down
- * so it won't be closed again by the network layer.
- *
- * 2002/11/07 - Tony Cureington <tony.cureington * hp_com>
- * - Fix arp_target_hw_addr memory leak
- * - Created activebackup_arp_monitor function to handle arp monitoring
- * in active backup mode - the bond_arp_monitor had several problems...
- * such as allowing slaves to tx arps sequentially without any delay
- * for a response
- * - Renamed bond_arp_monitor to loadbalance_arp_monitor and re-wrote
- * this function to just handle arp monitoring in load-balancing mode;
- * it is a lot more compact now
- * - Changes to ensure one and only one slave transmits in active-backup
- * mode
- * - Robustesize parameters; warn users about bad combinations of
- * parameters; also if miimon is specified and a network driver does
- * not support MII or ETHTOOL, inform the user of this
- * - Changes to support link_failure_count when in arp monitoring mode
- * - Fix up/down delay reported in /proc
- * - Added version; log version; make version available from "modinfo -d"
- * - Fixed problem in bond_check_dev_link - if the first IOCTL (SIOCGMIIPH)
- * failed, the ETHTOOL ioctl never got a chance
- *
- * 2002/11/16 - Laurent Deniel <laurent.deniel at free.fr>
- * - fix multicast handling in activebackup_arp_monitor
- * - remove one unnecessary and confusing curr_active_slave == slave test
- * in activebackup_arp_monitor
- *
- * 2002/11/17 - Laurent Deniel <laurent.deniel at free.fr>
- * - fix bond_slave_info_query when slave_id = num_slaves
- *
- * 2002/11/19 - Janice Girouard <girouard at us dot ibm dot com>
- * - correct ifr_data reference. Update ifr_data reference
- * to mii_ioctl_data struct values to avoid confusion.
- *
- * 2002/11/22 - Bert Barbe <bert.barbe at oracle dot com>
- * - Add support for multiple arp_ip_target
- *
- * 2002/12/13 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Changed to allow text strings for mode and multicast, e.g.,
- * insmod bonding mode=active-backup. The numbers still work.
- * One change: an invalid choice will cause module load failure,
- * rather than the previous behavior of just picking one.
- * - Minor cleanups; got rid of dup ctype stuff, atoi function
- *
- * 2003/02/07 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Added use_carrier module parameter that causes miimon to
- * use netif_carrier_ok() test instead of MII/ETHTOOL ioctls.
- * - Minor cleanups; consolidated ioctl calls to one function.
- *
- * 2003/02/07 - Tony Cureington <tony.cureington * hp_com>
- * - Fix bond_mii_monitor() logic error that could result in
- * bonding round-robin mode ignoring links after failover/recovery
- *
- * 2003/03/17 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - kmalloc fix (GFP_KERNEL to GFP_ATOMIC) reported by
- * Shmulik dot Hen at intel.com.
- * - Based on discussion on mailing list, changed use of
- * update_slave_cnt(), created wrapper functions for adding/removing
- * slaves, changed bond_xmit_xor() to check slave_cnt instead of
- * checking slave and slave->dev (which only worked by accident).
- * - Misc code cleanup: get arp_send() prototype from header file,
- * add max_bonds to bonding.txt.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Make sure only bond_attach_slave() and bond_detach_slave() can
- * manipulate the slave list, including slave_cnt, even when in
- * bond_release_all().
- * - Fixed hang in bond_release() with traffic running:
- * netdev_set_master() must not be called from within the bond lock.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Fixed hang in bond_enslave() with traffic running:
- * netdev_set_master() must not be called from within the bond lock.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
- * - Added support for getting slave's speed and duplex via ethtool.
- * Needed for 802.3ad and other future modes.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Enable support of modes that need to use the unique mac address of
- * each slave.
- * * bond_enslave(): Moved setting the slave's mac address, and
- * openning it, from the application to the driver. This breaks
- * backward comaptibility with old versions of ifenslave that open
- * the slave before enalsving it !!!.
- * * bond_release(): The driver also takes care of closing the slave
- * and restoring its original mac address.
- * - Removed the code that restores all base driver's flags.
- * Flags are automatically restored once all undo stages are done
- * properly.
- * - Block possibility of enslaving before the master is up. This
- * prevents putting the system in an unstable state.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
- * Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for IEEE 802.3ad Dynamic link aggregation mode.
- *
- * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- * - Added ABI version control to restore compatibility between
- * new/old ifenslave and new/old bonding.
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Fixed bug in bond_release_all(): save old value of curr_active_slave
- * before setting it to NULL.
- * - Changed driver versioning scheme to include version number instead
- * of release date (that is already in another field). There are 3
- * fields X.Y.Z where:
- * X - Major version - big behavior changes
- * Y - Minor version - addition of features
- * Z - Extra version - minor changes and bug fixes
- * The current version is 1.0.0 as a base line.
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Amir Noam <amir.noam at intel dot com>
- * - Added support for lacp_rate module param.
- * - Code beautification and style changes (mainly in comments).
- * new version - 1.0.1
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Based on discussion on mailing list, changed locking scheme
- * to use lock/unlock or lock_bh/unlock_bh appropriately instead
- * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing
- * hidden bugs and solves system hangs that occurred due to the fact
- * that holding lock_irqsave doesn't prevent softirqs from running.
- * This also increases total throughput since interrupts are not
- * blocked on each transmitted packets or monitor timeout.
- * new version - 2.0.0
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for Transmit load balancing mode.
- * - Concentrate all assignments of curr_active_slave to a single point
- * so specific modes can take actions when the primary adapter is
- * changed.
- * - Take the updelay parameter into consideration during bond_enslave
- * since some adapters loose their link during setting the device.
- * - Renamed bond_3ad_link_status_changed() to
- * bond_3ad_handle_link_change() for compatibility with TLB.
- * new version - 2.1.0
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com>
- * - Added support for Adaptive load balancing mode which is
- * equivalent to Transmit load balancing + Receive load balancing.
- * new version - 2.2.0
- *
- * 2003/05/15 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Applied fix to activebackup_arp_monitor posted to bonding-devel
- * by Tony Cureington <tony.cureington * hp_com>. Fixes ARP
- * monitor endless failover bug. Version to 2.2.10
- *
- * 2003/05/20 - Amir Noam <amir.noam at intel dot com>
- * - Fixed bug in ABI version control - Don't commit to a specific
- * ABI version if receiving unsupported ioctl commands.
- *
- * 2003/05/22 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Fix ifenslave -c causing bond to loose existing routes;
- * added bond_set_mac_address() that doesn't require the
- * bond to be down.
- * - In conjunction with fix for ifenslave -c, in
- * bond_change_active(), changing to the already active slave
- * is no longer an error (it successfully does nothing).
- *
- * 2003/06/30 - Amir Noam <amir.noam at intel dot com>
- * - Fixed bond_change_active() for ALB/TLB modes.
- * Version to 2.2.14.
- *
- * 2003/07/29 - Amir Noam <amir.noam at intel dot com>
- * - Fixed ARP monitoring bug.
- * Version to 2.2.15.
- *
- * 2003/07/31 - Willy Tarreau <willy at ods dot org>
- * - Fixed kernel panic when using ARP monitoring without
- * setting bond's IP address.
- * Version to 2.2.16.
- *
- * 2003/08/06 - Amir Noam <amir.noam at intel dot com>
- * - Back port from 2.6: use alloc_netdev(); fix /proc handling;
- * made stats a part of bond struct so no need to allocate
- * and free it separately; use standard list operations instead
- * of pre-allocated array of bonds.
- * Version to 2.3.0.
- *
- * 2003/08/07 - Jay Vosburgh <fubar at us dot ibm dot com>,
- * Amir Noam <amir.noam at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Propagating master's settings: Distinguish between modes that
- * use a primary slave from those that don't, and propagate settings
- * accordingly; Consolidate change_active opeartions and add
- * reselect_active and find_best opeartions; Decouple promiscuous
- * handling from the multicast mode setting; Add support for changing
- * HW address and MTU with proper unwind; Consolidate procfs code,
- * add CHANGENAME handler; Enhance netdev notification handling.
- * Version to 2.4.0.
- *
- * 2003/09/15 - Stephen Hemminger <shemminger at osdl dot org>,
- * Amir Noam <amir.noam at intel dot com>
- * - Convert /proc to seq_file interface.
- * Change /proc/net/bondX/info to /proc/net/bonding/bondX.
- * Set version to 2.4.1.
- *
- * 2003/11/20 - Amir Noam <amir.noam at intel dot com>
- * - Fix /proc creation/destruction.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Massive cleanup - Set version to 2.5.0
- * Code changes:
- * o Consolidate format of prints and debug prints.
- * o Remove bonding_t/slave_t typedefs and consolidate all casts.
- * o Remove dead code and unnecessary checks.
- * o Consolidate starting/stopping timers.
- * o Consolidate handling of primary module param throughout the code.
- * o Removed multicast module param support - all settings are done
- * according to mode.
- * o Slave list iteration - bond is no longer part of the list,
- * added cyclic list iteration macros.
- * o Consolidate error handling in all xmit functions.
- * Style changes:
- * o Consolidate function naming and declarations.
- * o Consolidate function params and local variables names.
- * o Consolidate return values.
- * o Consolidate curly braces.
- * o Consolidate conditionals format.
- * o Change struct member names and types.
- * o Chomp trailing spaces, remove empty lines, fix indentations.
- * o Re-organize code according to context.
- *
- * 2003/12/30 - Amir Noam <amir.noam at intel dot com>
- * - Fixed: Cannot remove and re-enslave the original active slave.
- * - Fixed: Releasing the original active slave causes mac address
- * duplication.
- * - Add support for slaves that use ethtool_ops.
- * Set version to 2.5.3.
- *
- * 2004/01/05 - Amir Noam <amir.noam at intel dot com>
- * - Save bonding parameters per bond instead of using the global values.
- * Set version to 2.5.4.
- *
- * 2004/01/14 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Enhance VLAN support:
- * * Add support for VLAN hardware acceleration capable slaves.
- * * Add capability to tag self generated packets in ALB/TLB modes.
- * Set version to 2.6.0.
- * 2004/10/29 - Mitch Williams <mitch.a.williams at intel dot com>
- * - Fixed bug when unloading module while using 802.3ad. If
- * spinlock debugging is turned on, this causes a stack dump.
- * Solution is to move call to dev_remove_pack outside of the
- * spinlock.
- * Set version to 2.6.1.
- * 2005/06/05 - Jay Vosburgh <fubar@us.ibm.com>
- * - Support for generating gratuitous ARPs in active-backup mode.
- * Includes support for VLAN tagging all bonding-generated ARPs
- * as needed. Set version to 2.6.2.
- * 2005/06/08 - Jason Gabler <jygabler at lbl dot gov>
- * - alternate hashing policy support for mode 2
- * * Added kernel parameter "xmit_hash_policy" to allow the selection
- * of different hashing policies for mode 2. The original mode 2
- * policy is the default, now found in xmit_hash_policy_layer2().
- * * Added xmit_hash_policy_layer34()
- * - Modified by Jay Vosburgh <fubar@us.ibm.com> to also support mode 4.
- * Set version to 2.6.3.
- * 2005/09/26 - Jay Vosburgh <fubar@us.ibm.com>
- * - Removed backwards compatibility for old ifenslaves. Version 2.6.4.
*/
//#define BONDING_DEBUG 1
@@ -557,6 +97,7 @@ static char *lacp_rate = NULL;
static char *xmit_hash_policy = NULL;
static int arp_interval = BOND_LINK_ARP_INTERV;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
+struct bond_params bonding_defaults;
module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
@@ -565,17 +106,24 @@ MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
-MODULE_PARM_DESC(downdelay, "Delay before considering link down, in milliseconds");
+MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
+ "in milliseconds");
module_param(use_carrier, int, 0);
-MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default)");
+MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
+ "0 for off, 1 for on (default)");
module_param(mode, charp, 0);
-MODULE_PARM_DESC(mode, "Mode of operation : 0 for round robin, 1 for active-backup, 2 for xor");
+MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
+ "1 for active-backup, 2 for balance-xor, "
+ "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
+ "6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(lacp_rate, charp, 0);
-MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner (slow/fast)");
+MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
+ "(slow/fast)");
module_param(xmit_hash_policy, charp, 0);
-MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method : 0 for layer 2 (default), 1 for layer 3+4");
+MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)"
+ ", 1 for layer 3+4");
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
@@ -586,30 +134,27 @@ MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
static const char *version =
DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
-static LIST_HEAD(bond_dev_list);
+LIST_HEAD(bond_dev_list);
#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *bond_proc_dir = NULL;
#endif
+extern struct rw_semaphore bonding_rwsem;
static u32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ;
static int arp_ip_count = 0;
static int bond_mode = BOND_MODE_ROUNDROBIN;
static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2;
static int lacp_fast = 0;
-struct bond_parm_tbl {
- char *modename;
- int mode;
-};
-static struct bond_parm_tbl bond_lacp_tbl[] = {
+struct bond_parm_tbl bond_lacp_tbl[] = {
{ "slow", AD_LACP_SLOW},
{ "fast", AD_LACP_FAST},
{ NULL, -1},
};
-static struct bond_parm_tbl bond_mode_tbl[] = {
+struct bond_parm_tbl bond_mode_tbl[] = {
{ "balance-rr", BOND_MODE_ROUNDROBIN},
{ "active-backup", BOND_MODE_ACTIVEBACKUP},
{ "balance-xor", BOND_MODE_XOR},
@@ -620,7 +165,7 @@ static struct bond_parm_tbl bond_mode_tbl[] = {
{ NULL, -1},
};
-static struct bond_parm_tbl xmit_hashtype_tbl[] = {
+struct bond_parm_tbl xmit_hashtype_tbl[] = {
{ "layer2", BOND_XMIT_POLICY_LAYER2},
{ "layer3+4", BOND_XMIT_POLICY_LAYER34},
{ NULL, -1},
@@ -628,12 +173,11 @@ static struct bond_parm_tbl xmit_hashtype_tbl[] = {
/*-------------------------- Forward declarations ---------------------------*/
-static inline void bond_set_mode_ops(struct bonding *bond, int mode);
static void bond_send_gratuitous_arp(struct bonding *bond);
/*---------------------------- General routines -----------------------------*/
-static const char *bond_mode_name(int mode)
+const char *bond_mode_name(int mode)
{
switch (mode) {
case BOND_MODE_ROUNDROBIN :
@@ -910,7 +454,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_add_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to add vlan id %d\n",
+ ": %s: Error: Failed to add vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -944,7 +488,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_del_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to remove vlan id %d\n",
+ ": %s: Error: Failed to remove vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -1449,7 +993,7 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
-static void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
+void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
{
struct slave *old_active = bond->curr_active_slave;
@@ -1523,7 +1067,7 @@ static void bond_change_active_slave(struct bonding *bond, struct slave *new_act
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
-static void bond_select_active_slave(struct bonding *bond)
+void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
@@ -1591,7 +1135,7 @@ static void bond_detach_slave(struct bonding *bond, struct slave *slave)
/*---------------------------------- IOCTL ----------------------------------*/
-static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
{
dprintk("bond_dev=%p\n", bond_dev);
dprintk("slave_dev=%p\n", slave_dev);
@@ -1631,7 +1175,7 @@ static int bond_compute_features(struct bonding *bond)
}
/* enslave device <slave> to bond device <master> */
-static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *new_slave = NULL;
@@ -1644,8 +1188,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
slave_dev->do_ioctl == NULL) {
printk(KERN_WARNING DRV_NAME
- ": Warning : no link monitoring support for %s\n",
- slave_dev->name);
+ ": %s: Warning: no link monitoring support for %s\n",
+ bond_dev->name, slave_dev->name);
}
/* bond must be initialized by bond_open() before enslaving */
@@ -1666,17 +1210,17 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
if (!list_empty(&bond->vlan_list)) {
printk(KERN_ERR DRV_NAME
- ": Error: cannot enslave VLAN "
+ ": %s: Error: cannot enslave VLAN "
"challenged slave %s on VLAN enabled "
- "bond %s\n", slave_dev->name,
+ "bond %s\n", bond_dev->name, slave_dev->name,
bond_dev->name);
return -EPERM;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: enslaved VLAN challenged "
+ ": %s: Warning: enslaved VLAN challenged "
"slave %s. Adding VLANs will be blocked as "
"long as %s is part of bond %s\n",
- slave_dev->name, slave_dev->name,
+ bond_dev->name, slave_dev->name, slave_dev->name,
bond_dev->name);
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
@@ -1706,12 +1250,11 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (slave_dev->set_mac_address == NULL) {
printk(KERN_ERR DRV_NAME
- ": Error: The slave device you specified does "
- "not support setting the MAC address.\n");
- printk(KERN_ERR
- "Your kernel likely does not support slave devices.\n");
-
- res = -EOPNOTSUPP;
+ ": %s: Error: The slave device you specified does "
+ "not support setting the MAC address. "
+ "Your kernel likely does not support slave "
+ "devices.\n", bond_dev->name);
+ res = -EOPNOTSUPP;
goto err_undo_flags;
}
@@ -1827,21 +1370,21 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
* the messages for netif_carrier.
*/
printk(KERN_WARNING DRV_NAME
- ": Warning: MII and ETHTOOL support not "
+ ": %s: Warning: MII and ETHTOOL support not "
"available for interface %s, and "
"arp_interval/arp_ip_target module parameters "
"not specified, thus bonding will not detect "
"link failures! see bonding.txt for details.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
printk(KERN_WARNING DRV_NAME
- ": Warning: can't get link status from "
+ ": %s: Warning: can't get link status from "
"interface %s; the network driver associated "
"with this interface does not support MII or "
"ETHTOOL link status reporting, thus miimon "
"has no effect on this interface.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
}
}
@@ -1868,15 +1411,15 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (bond_update_speed_duplex(new_slave) &&
(new_slave->link != BOND_LINK_DOWN)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: failed to get speed and duplex from %s, "
+ ": %s: Warning: failed to get speed and duplex from %s, "
"assumed to be 100Mb/sec and Full.\n",
- new_slave->dev->name);
+ bond_dev->name, new_slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD) {
- printk(KERN_WARNING
- "Operation of 802.3ad mode requires ETHTOOL "
+ printk(KERN_WARNING DRV_NAME
+ ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
"support in base driver for proper aggregator "
- "selection.\n");
+ "selection.\n", bond_dev->name);
}
}
@@ -1958,6 +1501,10 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
write_unlock_bh(&bond->lock);
+ res = bond_create_slave_symlinks(bond_dev, slave_dev);
+ if (res)
+ goto err_unset_master;
+
printk(KERN_INFO DRV_NAME
": %s: enslaving %s as a%s interface with a%s link.\n",
bond_dev->name, slave_dev->name,
@@ -1999,7 +1546,7 @@ err_undo_flags:
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
-static int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
@@ -2010,7 +1557,7 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
if (!(slave_dev->flags & IFF_SLAVE) ||
(slave_dev->master != bond_dev)) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: cannot release %s.\n",
+ ": %s: Error: cannot release %s.\n",
bond_dev->name, slave_dev->name);
return -EINVAL;
}
@@ -2031,11 +1578,12 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
ETH_ALEN);
if (!mac_addr_differ && (bond->slave_cnt > 1)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: the permanent HWaddr of %s "
+ ": %s: Warning: the permanent HWaddr of %s "
"- %02X:%02X:%02X:%02X:%02X:%02X - is "
"still in use by %s. Set the HWaddr of "
"%s to a different address to avoid "
"conflicts.\n",
+ bond_dev->name,
slave_dev->name,
slave->perm_hwaddr[0],
slave->perm_hwaddr[1],
@@ -2111,24 +1659,28 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
!bond_has_challenged_slaves(bond)) {
printk(KERN_INFO DRV_NAME
- ": last VLAN challenged slave %s "
+ ": %s: last VLAN challenged slave %s "
"left bond %s. VLAN blocking is removed\n",
- slave_dev->name, bond_dev->name);
+ bond_dev->name, slave_dev->name, bond_dev->name);
bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
write_unlock_bh(&bond->lock);
+ /* must do this from outside any spinlocks */
+ bond_destroy_slave_symlinks(bond_dev, slave_dev);
+
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
@@ -2220,6 +1772,7 @@ static int bond_release_all(struct net_device *bond_dev)
*/
write_unlock_bh(&bond->lock);
+ bond_destroy_slave_symlinks(bond_dev, slave_dev);
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
@@ -2274,12 +1827,13 @@ static int bond_release_all(struct net_device *bond_dev)
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
printk(KERN_INFO DRV_NAME
@@ -2397,7 +1951,7 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
/*-------------------------------- Monitoring -------------------------------*/
/* this function is called regularly to monitor each slave's link. */
-static void bond_mii_monitor(struct net_device *bond_dev)
+void bond_mii_monitor(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
@@ -2596,8 +2150,11 @@ static void bond_mii_monitor(struct net_device *bond_dev)
break;
default:
/* Should not happen */
- printk(KERN_ERR "bonding: Error: %s Illegal value (link=%d)\n",
- slave->dev->name, slave->link);
+ printk(KERN_ERR DRV_NAME
+ ": %s: Error: %s Illegal value (link=%d)\n",
+ bond_dev->name,
+ slave->dev->name,
+ slave->link);
goto out;
} /* end of switch (slave->link) */
@@ -2721,7 +2278,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
struct flowi fl;
struct rtable *rt;
- for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ if (!targets[i])
+ continue;
dprintk("basa: target %x\n", targets[i]);
if (list_empty(&bond->vlan_list)) {
dprintk("basa: empty vlan: arp_send\n");
@@ -2825,7 +2384,7 @@ static void bond_send_gratuitous_arp(struct bonding *bond)
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
* arp monitoring in active backup mode.
*/
-static void bond_loadbalance_arp_mon(struct net_device *bond_dev)
+void bond_loadbalance_arp_mon(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
@@ -2963,7 +2522,7 @@ out:
* may have received.
* see loadbalance_arp_monitor for arp monitoring in load balancing mode
*/
-static void bond_activebackup_arp_mon(struct net_device *bond_dev)
+void bond_activebackup_arp_mon(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave;
@@ -3249,6 +2808,8 @@ static void bond_info_show_master(struct seq_file *seq)
{
struct bonding *bond = seq->private;
struct slave *curr;
+ int i;
+ u32 target;
read_lock(&bond->curr_slave_lock);
curr = bond->curr_active_slave;
@@ -3257,10 +2818,17 @@ static void bond_info_show_master(struct seq_file *seq)
seq_printf(seq, "Bonding Mode: %s\n",
bond_mode_name(bond->params.mode));
+ if (bond->params.mode == BOND_MODE_XOR ||
+ bond->params.mode == BOND_MODE_8023AD) {
+ seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
+ xmit_hashtype_tbl[bond->params.xmit_policy].modename,
+ bond->params.xmit_policy);
+ }
+
if (USES_PRIMARY(bond->params.mode)) {
seq_printf(seq, "Primary Slave: %s\n",
- (bond->params.primary[0]) ?
- bond->params.primary : "None");
+ (bond->primary_slave) ?
+ bond->primary_slave->dev->name : "None");
seq_printf(seq, "Currently Active Slave: %s\n",
(curr) ? curr->dev->name : "None");
@@ -3273,6 +2841,27 @@ static void bond_info_show_master(struct seq_file *seq)
seq_printf(seq, "Down Delay (ms): %d\n",
bond->params.downdelay * bond->params.miimon);
+
+ /* ARP information */
+ if(bond->params.arp_interval > 0) {
+ int printed=0;
+ seq_printf(seq, "ARP Polling Interval (ms): %d\n",
+ bond->params.arp_interval);
+
+ seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
+
+ for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
+ if (!bond->params.arp_targets[i])
+ continue;
+ if (printed)
+ seq_printf(seq, ",");
+ target = ntohl(bond->params.arp_targets[i]);
+ seq_printf(seq, " %d.%d.%d.%d", HIPQUAD(target));
+ printed = 1;
+ }
+ seq_printf(seq, "\n");
+ }
+
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
@@ -3478,7 +3067,10 @@ static int bond_event_changename(struct bonding *bond)
bond_remove_proc_entry(bond);
bond_create_proc_entry(bond);
#endif
-
+ down_write(&(bonding_rwsem));
+ bond_destroy_sysfs_entry(bond);
+ bond_create_sysfs_entry(bond);
+ up_write(&(bonding_rwsem));
return NOTIFY_DONE;
}
@@ -3955,6 +3547,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
return -EPERM;
}
+ down_write(&(bonding_rwsem));
slave_dev = dev_get_by_name(ifr->ifr_slave);
dprintk("slave_dev=%p: \n", slave_dev);
@@ -3987,6 +3580,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
dev_put(slave_dev);
}
+ up_write(&(bonding_rwsem));
return res;
}
@@ -4071,6 +3665,7 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
bond_for_each_slave(bond, slave, i) {
dprintk("s %p s->p %p c_m %p\n", slave,
slave->prev, slave->dev->change_mtu);
+
res = dev_set_mtu(slave->dev, new_mtu);
if (res) {
@@ -4397,8 +3992,9 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
printk(KERN_ERR DRV_NAME
- ": Error: bond_xmit_broadcast(): "
- "skb_clone() failed\n");
+ ": %s: Error: bond_xmit_broadcast(): "
+ "skb_clone() failed\n",
+ bond_dev->name);
continue;
}
@@ -4431,7 +4027,7 @@ out:
/*
* set bond mode specific net device operations
*/
-static inline void bond_set_mode_ops(struct bonding *bond, int mode)
+void bond_set_mode_ops(struct bonding *bond, int mode)
{
struct net_device *bond_dev = bond->dev;
@@ -4467,7 +4063,8 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode)
default:
/* Should never happen, mode already checked */
printk(KERN_ERR DRV_NAME
- ": Error: Unknown bonding mode %d\n",
+ ": %s: Error: Unknown bonding mode %d\n",
+ bond_dev->name,
mode);
break;
}
@@ -4491,7 +4088,7 @@ static struct ethtool_ops bond_ethtool_ops = {
* Does not allocate but creates a /proc entry.
* Allowed to fail.
*/
-static int __init bond_init(struct net_device *bond_dev, struct bond_params *params)
+static int bond_init(struct net_device *bond_dev, struct bond_params *params)
{
struct bonding *bond = bond_dev->priv;
@@ -4565,7 +4162,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
/* De-initialize device specific data.
* Caller must hold rtnl_lock.
*/
-static inline void bond_deinit(struct net_device *bond_dev)
+void bond_deinit(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
@@ -4601,7 +4198,7 @@ static void bond_free_all(void)
* Convert string input module parms. Accept either the
* number of the mode or its string name.
*/
-static inline int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl)
+int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl)
{
int i;
@@ -4670,7 +4267,7 @@ static int bond_check_params(struct bond_params *params)
if (max_bonds < 1 || max_bonds > INT_MAX) {
printk(KERN_WARNING DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it "
- "was reset to BOND_DEFAULT_MAX_BONDS (%d)",
+ "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
@@ -4881,81 +4478,96 @@ static int bond_check_params(struct bond_params *params)
return 0;
}
+/* Create a new bond based on the specified name and bonding parameters.
+ * Caller must NOT hold rtnl_lock; we need to release it here before we
+ * set up our sysfs entries.
+ */
+int bond_create(char *name, struct bond_params *params, struct bonding **newbond)
+{
+ struct net_device *bond_dev;
+ int res;
+
+ rtnl_lock();
+ bond_dev = alloc_netdev(sizeof(struct bonding), name, ether_setup);
+ if (!bond_dev) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: eek! can't alloc netdev!\n",
+ name);
+ res = -ENOMEM;
+ goto out_rtnl;
+ }
+
+ /* bond_init() must be called after dev_alloc_name() (for the
+ * /proc files), but before register_netdevice(), because we
+ * need to set function pointers.
+ */
+
+ res = bond_init(bond_dev, params);
+ if (res < 0) {
+ goto out_netdev;
+ }
+
+ SET_MODULE_OWNER(bond_dev);
+
+ res = register_netdevice(bond_dev);
+ if (res < 0) {
+ goto out_bond;
+ }
+ if (newbond)
+ *newbond = bond_dev->priv;
+
+ rtnl_unlock(); /* allows sysfs registration of net device */
+ res = bond_create_sysfs_entry(bond_dev->priv);
+ goto done;
+out_bond:
+ bond_deinit(bond_dev);
+out_netdev:
+ free_netdev(bond_dev);
+out_rtnl:
+ rtnl_unlock();
+done:
+ return res;
+}
+
static int __init bonding_init(void)
{
- struct bond_params params;
int i;
int res;
+ char new_bond_name[8]; /* Enough room for 999 bonds at init. */
printk(KERN_INFO "%s", version);
- res = bond_check_params(&params);
+ res = bond_check_params(&bonding_defaults);
if (res) {
- return res;
+ goto out;
}
- rtnl_lock();
-
#ifdef CONFIG_PROC_FS
bond_create_proc_dir();
#endif
-
for (i = 0; i < max_bonds; i++) {
- struct net_device *bond_dev;
-
- bond_dev = alloc_netdev(sizeof(struct bonding), "", ether_setup);
- if (!bond_dev) {
- res = -ENOMEM;
- goto out_err;
- }
-
- res = dev_alloc_name(bond_dev, "bond%d");
- if (res < 0) {
- free_netdev(bond_dev);
- goto out_err;
- }
-
- /* bond_init() must be called after dev_alloc_name() (for the
- * /proc files), but before register_netdevice(), because we
- * need to set function pointers.
- */
- res = bond_init(bond_dev, &params);
- if (res < 0) {
- free_netdev(bond_dev);
- goto out_err;
- }
-
- SET_MODULE_OWNER(bond_dev);
-
- res = register_netdevice(bond_dev);
- if (res < 0) {
- bond_deinit(bond_dev);
- free_netdev(bond_dev);
- goto out_err;
- }
+ sprintf(new_bond_name, "bond%d",i);
+ res = bond_create(new_bond_name,&bonding_defaults, NULL);
+ if (res)
+ goto err;
}
- rtnl_unlock();
+ res = bond_create_sysfs();
+ if (res)
+ goto err;
+
register_netdevice_notifier(&bond_netdev_notifier);
register_inetaddr_notifier(&bond_inetaddr_notifier);
- return 0;
-
-out_err:
- /*
- * rtnl_unlock() will run netdev_run_todo(), putting the
- * thus-far-registered bonding devices into a state which
- * unregigister_netdevice() will accept
- */
- rtnl_unlock();
+ goto out;
+err:
rtnl_lock();
-
- /* free and unregister all bonds that were successfully added */
bond_free_all();
-
+ bond_destroy_sysfs();
rtnl_unlock();
-
+out:
return res;
+
}
static void __exit bonding_exit(void)
@@ -4965,6 +4577,7 @@ static void __exit bonding_exit(void)
rtnl_lock();
bond_free_all();
+ bond_destroy_sysfs();
rtnl_unlock();
}
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
new file mode 100644
index 00000000000..32d13da43a0
--- /dev/null
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -0,0 +1,1358 @@
+
+/*
+ * Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/in.h>
+#include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/inet.h>
+#include <linux/rtnetlink.h>
+
+/* #define BONDING_DEBUG 1 */
+#include "bonding.h"
+#define to_class_dev(obj) container_of(obj,struct class_device,kobj)
+#define to_net_dev(class) container_of(class, struct net_device, class_dev)
+#define to_bond(cd) ((struct bonding *)(to_net_dev(cd)->priv))
+
+/*---------------------------- Declarations -------------------------------*/
+
+
+extern struct list_head bond_dev_list;
+extern struct bond_params bonding_defaults;
+extern struct bond_parm_tbl bond_mode_tbl[];
+extern struct bond_parm_tbl bond_lacp_tbl[];
+extern struct bond_parm_tbl xmit_hashtype_tbl[];
+
+static int expected_refcount = -1;
+static struct class *netdev_class;
+/*--------------------------- Data Structures -----------------------------*/
+
+/* Bonding sysfs lock. Why can't we just use the subsytem lock?
+ * Because kobject_register tries to acquire the subsystem lock. If
+ * we already hold the lock (which we would if the user was creating
+ * a new bond through the sysfs interface), we deadlock.
+ * This lock is only needed when deleting a bond - we need to make sure
+ * that we don't collide with an ongoing ioctl.
+ */
+
+struct rw_semaphore bonding_rwsem;
+
+
+
+
+/*------------------------------ Functions --------------------------------*/
+
+/*
+ * "show" function for the bond_masters attribute.
+ * The class parameter is ignored.
+ */
+static ssize_t bonding_show_bonds(struct class *cls, char *buffer)
+{
+ int res = 0;
+ struct bonding *bond;
+
+ down_read(&(bonding_rwsem));
+
+ list_for_each_entry(bond, &bond_dev_list, bond_list) {
+ if (res > (PAGE_SIZE - IFNAMSIZ)) {
+ /* not enough space for another interface name */
+ if ((PAGE_SIZE - res) > 10)
+ res = PAGE_SIZE - 10;
+ res += sprintf(buffer + res, "++more++");
+ break;
+ }
+ res += sprintf(buffer + res, "%s ",
+ bond->dev->name);
+ }
+ res += sprintf(buffer + res, "\n");
+ res++;
+ up_read(&(bonding_rwsem));
+ return res;
+}
+
+/*
+ * "store" function for the bond_masters attribute. This is what
+ * creates and deletes entire bonds.
+ *
+ * The class parameter is ignored.
+ *
+ */
+
+static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t count)
+{
+ char command[IFNAMSIZ + 1] = {0, };
+ char *ifname;
+ int res = count;
+ struct bonding *bond;
+ struct bonding *nxt;
+
+ down_write(&(bonding_rwsem));
+ sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
+ ifname = command + 1;
+ if ((strlen(command) <= 1) ||
+ !dev_valid_name(ifname))
+ goto err_no_cmd;
+
+ if (command[0] == '+') {
+
+ /* Check to see if the bond already exists. */
+ list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list)
+ if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) {
+ printk(KERN_ERR DRV_NAME
+ ": cannot add bond %s; it already exists\n",
+ ifname);
+ res = -EPERM;
+ goto out;
+ }
+
+ printk(KERN_INFO DRV_NAME
+ ": %s is being created...\n", ifname);
+ if (bond_create(ifname, &bonding_defaults, &bond)) {
+ printk(KERN_INFO DRV_NAME
+ ": %s interface already exists. Bond creation failed.\n",
+ ifname);
+ res = -EPERM;
+ }
+ goto out;
+ }
+
+ if (command[0] == '-') {
+ list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list)
+ if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) {
+ rtnl_lock();
+ /* check the ref count on the bond's kobject.
+ * If it's > expected, then there's a file open,
+ * and we have to fail.
+ */
+ if (atomic_read(&bond->dev->class_dev.kobj.kref.refcount)
+ > expected_refcount){
+ rtnl_unlock();
+ printk(KERN_INFO DRV_NAME
+ ": Unable remove bond %s due to open references.\n",
+ ifname);
+ res = -EPERM;
+ goto out;
+ }
+ printk(KERN_INFO DRV_NAME
+ ": %s is being deleted...\n",
+ bond->dev->name);
+ unregister_netdevice(bond->dev);
+ bond_deinit(bond->dev);
+ bond_destroy_sysfs_entry(bond);
+ rtnl_unlock();
+ goto out;
+ }
+
+ printk(KERN_ERR DRV_NAME
+ ": unable to delete non-existent bond %s\n", ifname);
+ res = -ENODEV;
+ goto out;
+ }
+
+err_no_cmd:
+ printk(KERN_ERR DRV_NAME
+ ": no command found in bonding_masters. Use +ifname or -ifname.\n");
+ res = -EPERM;
+
+ /* Always return either count or an error. If you return 0, you'll
+ * get called forever, which is bad.
+ */
+out:
+ up_write(&(bonding_rwsem));
+ return res;
+}
+/* class attribute for bond_masters file. This ends up in /sys/class/net */
+static CLASS_ATTR(bonding_masters, S_IWUSR | S_IRUGO,
+ bonding_show_bonds, bonding_store_bonds);
+
+int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave)
+{
+ char linkname[IFNAMSIZ+7];
+ int ret = 0;
+
+ /* first, create a link from the slave back to the master */
+ ret = sysfs_create_link(&(slave->class_dev.kobj), &(master->class_dev.kobj),
+ "master");
+ if (ret)
+ return ret;
+ /* next, create a link from the master to the slave */
+ sprintf(linkname,"slave_%s",slave->name);
+ ret = sysfs_create_link(&(master->class_dev.kobj), &(slave->class_dev.kobj),
+ linkname);
+ return ret;
+
+}
+
+void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave)
+{
+ char linkname[IFNAMSIZ+7];
+
+ sysfs_remove_link(&(slave->class_dev.kobj), "master");
+ sprintf(linkname,"slave_%s",slave->name);
+ sysfs_remove_link(&(master->class_dev.kobj), linkname);
+}
+
+
+/*
+ * Show the slaves in the current bond.
+ */
+static ssize_t bonding_show_slaves(struct class_device *cd, char *buf)
+{
+ struct slave *slave;
+ int i, res = 0;
+ struct bonding *bond = to_bond(cd);
+
+ read_lock_bh(&bond->lock);
+ bond_for_each_slave(bond, slave, i) {
+ if (res > (PAGE_SIZE - IFNAMSIZ)) {
+ /* not enough space for another interface name */
+ if ((PAGE_SIZE - res) > 10)
+ res = PAGE_SIZE - 10;
+ res += sprintf(buf + res, "++more++");
+ break;
+ }
+ res += sprintf(buf + res, "%s ", slave->dev->name);
+ }
+ read_unlock_bh(&bond->lock);
+ res += sprintf(buf + res, "\n");
+ res++;
+ return res;
+}
+
+/*
+ * Set the slaves in the current bond. The bond interface must be
+ * up for this to succeed.
+ * This function is largely the same flow as bonding_update_bonds().
+ */
+static ssize_t bonding_store_slaves(struct class_device *cd, const char *buffer, size_t count)
+{
+ char command[IFNAMSIZ + 1] = { 0, };
+ char *ifname;
+ int i, res, found, ret = count;
+ struct slave *slave;
+ struct net_device *dev = 0;
+ struct bonding *bond = to_bond(cd);
+
+ /* Quick sanity check -- is the bond interface up? */
+ if (!(bond->dev->flags & IFF_UP)) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Unable to update slaves because interface is down.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ /* Note: We can't hold bond->lock here, as bond_create grabs it. */
+
+ sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
+ ifname = command + 1;
+ if ((strlen(command) <= 1) ||
+ !dev_valid_name(ifname))
+ goto err_no_cmd;
+
+ if (command[0] == '+') {
+
+ /* Got a slave name in ifname. Is it already in the list? */
+ found = 0;
+ read_lock_bh(&bond->lock);
+ bond_for_each_slave(bond, slave, i)
+ if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Interface %s is already enslaved!\n",
+ bond->dev->name, ifname);
+ ret = -EPERM;
+ read_unlock_bh(&bond->lock);
+ goto out;
+ }
+
+ read_unlock_bh(&bond->lock);
+ printk(KERN_INFO DRV_NAME ": %s: Adding slave %s.\n",
+ bond->dev->name, ifname);
+ dev = dev_get_by_name(ifname);
+ if (!dev) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Interface %s does not exist!\n",
+ bond->dev->name, ifname);
+ ret = -EPERM;
+ goto out;
+ }
+ else
+ dev_put(dev);
+
+ if (dev->flags & IFF_UP) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Error: Unable to enslave %s "
+ "because it is already up.\n",
+ bond->dev->name, dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+ /* If this is the first slave, then we need to set
+ the master's hardware address to be the same as the
+ slave's. */
+ if (!(*((u32 *) & (bond->dev->dev_addr[0])))) {
+ memcpy(bond->dev->dev_addr, dev->dev_addr,
+ dev->addr_len);
+ }
+
+ /* Set the slave's MTU to match the bond */
+ if (dev->mtu != bond->dev->mtu) {
+ if (dev->change_mtu) {
+ res = dev->change_mtu(dev,
+ bond->dev->mtu);
+ if (res) {
+ ret = res;
+ goto out;
+ }
+ } else {
+ dev->mtu = bond->dev->mtu;
+ }
+ }
+ rtnl_lock();
+ res = bond_enslave(bond->dev, dev);
+ rtnl_unlock();
+ if (res) {
+ ret = res;
+ }
+ goto out;
+ }
+
+ if (command[0] == '-') {
+ dev = NULL;
+ bond_for_each_slave(bond, slave, i)
+ if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
+ dev = slave->dev;
+ break;
+ }
+ if (dev) {
+ printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n",
+ bond->dev->name, dev->name);
+ rtnl_lock();
+ res = bond_release(bond->dev, dev);
+ rtnl_unlock();
+ if (res) {
+ ret = res;
+ goto out;
+ }
+ /* set the slave MTU to the default */
+ if (dev->change_mtu) {
+ dev->change_mtu(dev, 1500);
+ } else {
+ dev->mtu = 1500;
+ }
+ }
+ else {
+ printk(KERN_ERR DRV_NAME ": unable to remove non-existent slave %s for bond %s.\n",
+ ifname, bond->dev->name);
+ ret = -ENODEV;
+ }
+ goto out;
+ }
+
+err_no_cmd:
+ printk(KERN_ERR DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
+ ret = -EPERM;
+
+out:
+ return ret;
+}
+
+static CLASS_DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves);
+
+/*
+ * Show and set the bonding mode. The bond interface must be down to
+ * change the mode.
+ */
+static ssize_t bonding_show_mode(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%s %d\n",
+ bond_mode_tbl[bond->params.mode].modename,
+ bond->params.mode) + 1;
+}
+
+static ssize_t bonding_store_mode(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->dev->flags & IFF_UP) {
+ printk(KERN_ERR DRV_NAME
+ ": unable to update mode of %s because interface is up.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ new_value = bond_parse_parm((char *)buf, bond_mode_tbl);
+ if (new_value < 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Ignoring invalid mode value %.*s.\n",
+ bond->dev->name,
+ (int)strlen(buf) - 1, buf);
+ ret = -EINVAL;
+ goto out;
+ } else {
+ bond->params.mode = new_value;
+ bond_set_mode_ops(bond, bond->params.mode);
+ printk(KERN_INFO DRV_NAME ": %s: setting mode to %s (%d).\n",
+ bond->dev->name, bond_mode_tbl[new_value].modename, new_value);
+ }
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode);
+
+/*
+ * Show and set the bonding transmit hash method. The bond interface must be down to
+ * change the xmit hash policy.
+ */
+static ssize_t bonding_show_xmit_hash(struct class_device *cd, char *buf)
+{
+ int count;
+ struct bonding *bond = to_bond(cd);
+
+ if ((bond->params.mode != BOND_MODE_XOR) &&
+ (bond->params.mode != BOND_MODE_8023AD)) {
+ // Not Applicable
+ count = sprintf(buf, "NA\n") + 1;
+ } else {
+ count = sprintf(buf, "%s %d\n",
+ xmit_hashtype_tbl[bond->params.xmit_policy].modename,
+ bond->params.xmit_policy) + 1;
+ }
+
+ return count;
+}
+
+static ssize_t bonding_store_xmit_hash(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->dev->flags & IFF_UP) {
+ printk(KERN_ERR DRV_NAME
+ "%s: Interface is up. Unable to update xmit policy.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ if ((bond->params.mode != BOND_MODE_XOR) &&
+ (bond->params.mode != BOND_MODE_8023AD)) {
+ printk(KERN_ERR DRV_NAME
+ "%s: Transmit hash policy is irrelevant in this mode.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ new_value = bond_parse_parm((char *)buf, xmit_hashtype_tbl);
+ if (new_value < 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Ignoring invalid xmit hash policy value %.*s.\n",
+ bond->dev->name,
+ (int)strlen(buf) - 1, buf);
+ ret = -EINVAL;
+ goto out;
+ } else {
+ bond->params.xmit_policy = new_value;
+ bond_set_mode_ops(bond, bond->params.mode);
+ printk(KERN_INFO DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
+ bond->dev->name, xmit_hashtype_tbl[new_value].modename, new_value);
+ }
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash);
+
+/*
+ * Show and set the arp timer interval. There are two tricky bits
+ * here. First, if ARP monitoring is activated, then we must disable
+ * MII monitoring. Second, if the ARP timer isn't running, we must
+ * start it.
+ */
+static ssize_t bonding_show_arp_interval(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%d\n", bond->params.arp_interval) + 1;
+}
+
+static ssize_t bonding_store_arp_interval(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: no arp_interval value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (new_value < 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ bond->dev->name, new_value, INT_MAX);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting ARP monitoring interval to %d.\n",
+ bond->dev->name, new_value);
+ bond->params.arp_interval = new_value;
+ if (bond->params.miimon) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: ARP monitoring cannot be used with MII monitoring. "
+ "%s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
+ bond->params.miimon = 0;
+ /* Kill MII timer, else it brings bond's link down */
+ if (bond->arp_timer.function) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Kill MII timer, else it brings bond's link down...\n",
+ bond->dev->name);
+ del_timer_sync(&bond->mii_timer);
+ }
+ }
+ if (!bond->params.arp_targets[0]) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: ARP monitoring has been set up, "
+ "but no ARP targets have been specified.\n",
+ bond->dev->name);
+ }
+ if (bond->dev->flags & IFF_UP) {
+ /* If the interface is up, we may need to fire off
+ * the ARP timer. If the interface is down, the
+ * timer will get fired off when the open function
+ * is called.
+ */
+ if (bond->arp_timer.function) {
+ /* The timer's already set up, so fire it off */
+ mod_timer(&bond->arp_timer, jiffies + 1);
+ } else {
+ /* Set up the timer. */
+ init_timer(&bond->arp_timer);
+ bond->arp_timer.expires = jiffies + 1;
+ bond->arp_timer.data =
+ (unsigned long) bond->dev;
+ if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
+ bond->arp_timer.function =
+ (void *)
+ &bond_activebackup_arp_mon;
+ } else {
+ bond->arp_timer.function =
+ (void *)
+ &bond_loadbalance_arp_mon;
+ }
+ add_timer(&bond->arp_timer);
+ }
+ }
+
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval);
+
+/*
+ * Show and set the arp targets.
+ */
+static ssize_t bonding_show_arp_targets(struct class_device *cd, char *buf)
+{
+ int i, res = 0;
+ struct bonding *bond = to_bond(cd);
+
+ for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) {
+ if (bond->params.arp_targets[i])
+ res += sprintf(buf + res, "%u.%u.%u.%u ",
+ NIPQUAD(bond->params.arp_targets[i]));
+ }
+ if (res)
+ res--; /* eat the leftover space */
+ res += sprintf(buf + res, "\n");
+ res++;
+ return res;
+}
+
+static ssize_t bonding_store_arp_targets(struct class_device *cd, const char *buf, size_t count)
+{
+ u32 newtarget;
+ int i = 0, done = 0, ret = count;
+ struct bonding *bond = to_bond(cd);
+ u32 *targets;
+
+ targets = bond->params.arp_targets;
+ newtarget = in_aton(buf + 1);
+ /* look for adds */
+ if (buf[0] == '+') {
+ if ((newtarget == 0) || (newtarget == INADDR_BROADCAST)) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: invalid ARP target %u.%u.%u.%u specified for addition\n",
+ bond->dev->name, NIPQUAD(newtarget));
+ ret = -EINVAL;
+ goto out;
+ }
+ /* look for an empty slot to put the target in, and check for dupes */
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ if (targets[i] == newtarget) { /* duplicate */
+ printk(KERN_ERR DRV_NAME
+ ": %s: ARP target %u.%u.%u.%u is already present\n",
+ bond->dev->name, NIPQUAD(newtarget));
+ if (done)
+ targets[i] = 0;
+ ret = -EINVAL;
+ goto out;
+ }
+ if (targets[i] == 0 && !done) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: adding ARP target %d.%d.%d.%d.\n",
+ bond->dev->name, NIPQUAD(newtarget));
+ done = 1;
+ targets[i] = newtarget;
+ }
+ }
+ if (!done) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: ARP target table is full!\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ }
+ else if (buf[0] == '-') {
+ if ((newtarget == 0) || (newtarget == INADDR_BROADCAST)) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: invalid ARP target %d.%d.%d.%d specified for removal\n",
+ bond->dev->name, NIPQUAD(newtarget));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ if (targets[i] == newtarget) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: removing ARP target %d.%d.%d.%d.\n",
+ bond->dev->name, NIPQUAD(newtarget));
+ targets[i] = 0;
+ done = 1;
+ }
+ }
+ if (!done) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: unable to remove nonexistent ARP target %d.%d.%d.%d.\n",
+ bond->dev->name, NIPQUAD(newtarget));
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+ else {
+ printk(KERN_ERR DRV_NAME ": no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR , bonding_show_arp_targets, bonding_store_arp_targets);
+
+/*
+ * Show and set the up and down delays. These must be multiples of the
+ * MII monitoring value, and are stored internally as the multiplier.
+ * Thus, we must translate to MS for the real world.
+ */
+static ssize_t bonding_show_downdelay(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon) + 1;
+}
+
+static ssize_t bonding_store_downdelay(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (!(bond->params.miimon)) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Unable to set down delay as MII monitoring is disabled\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: no down delay value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (new_value < 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 1, INT_MAX);
+ ret = -EINVAL;
+ goto out;
+ } else {
+ if ((new_value % bond->params.miimon) != 0) {
+ printk(KERN_WARNING DRV_NAME
+ ": %s: Warning: down delay (%d) is not a multiple "
+ "of miimon (%d), delay rounded to %d ms\n",
+ bond->dev->name, new_value, bond->params.miimon,
+ (new_value / bond->params.miimon) *
+ bond->params.miimon);
+ }
+ bond->params.downdelay = new_value / bond->params.miimon;
+ printk(KERN_INFO DRV_NAME ": %s: Setting down delay to %d.\n",
+ bond->dev->name, bond->params.downdelay * bond->params.miimon);
+
+ }
+
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay);
+
+static ssize_t bonding_show_updelay(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon) + 1;
+
+}
+
+static ssize_t bonding_store_updelay(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (!(bond->params.miimon)) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Unable to set up delay as MII monitoring is disabled\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: no up delay value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (new_value < 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 1, INT_MAX);
+ ret = -EINVAL;
+ goto out;
+ } else {
+ if ((new_value % bond->params.miimon) != 0) {
+ printk(KERN_WARNING DRV_NAME
+ ": %s: Warning: up delay (%d) is not a multiple "
+ "of miimon (%d), updelay rounded to %d ms\n",
+ bond->dev->name, new_value, bond->params.miimon,
+ (new_value / bond->params.miimon) *
+ bond->params.miimon);
+ }
+ bond->params.updelay = new_value / bond->params.miimon;
+ printk(KERN_INFO DRV_NAME ": %s: Setting up delay to %d.\n",
+ bond->dev->name, bond->params.updelay * bond->params.miimon);
+
+ }
+
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay);
+
+/*
+ * Show and set the LACP interval. Interface must be down, and the mode
+ * must be set to 802.3ad mode.
+ */
+static ssize_t bonding_show_lacp(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%s %d\n",
+ bond_lacp_tbl[bond->params.lacp_fast].modename,
+ bond->params.lacp_fast) + 1;
+}
+
+static ssize_t bonding_store_lacp(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->dev->flags & IFF_UP) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Unable to update LACP rate because interface is up.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ if (bond->params.mode != BOND_MODE_8023AD) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ new_value = bond_parse_parm((char *)buf, bond_lacp_tbl);
+
+ if ((new_value == 1) || (new_value == 0)) {
+ bond->params.lacp_fast = new_value;
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting LACP rate to %s (%d).\n",
+ bond->dev->name, bond_lacp_tbl[new_value].modename, new_value);
+ } else {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Ignoring invalid LACP rate value %.*s.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
+ ret = -EINVAL;
+ }
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp);
+
+/*
+ * Show and set the MII monitor interval. There are two tricky bits
+ * here. First, if MII monitoring is activated, then we must disable
+ * ARP monitoring. Second, if the timer isn't running, we must
+ * start it.
+ */
+static ssize_t bonding_show_miimon(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%d\n", bond->params.miimon) + 1;
+}
+
+static ssize_t bonding_store_miimon(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: no miimon value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (new_value < 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 1, INT_MAX);
+ ret = -EINVAL;
+ goto out;
+ } else {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
+ bond->params.miimon = new_value;
+ if(bond->params.updelay)
+ printk(KERN_INFO DRV_NAME
+ ": %s: Note: Updating updelay (to %d) "
+ "since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
+ if(bond->params.downdelay)
+ printk(KERN_INFO DRV_NAME
+ ": %s: Note: Updating downdelay (to %d) "
+ "since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
+ if (bond->params.arp_interval) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: MII monitoring cannot be used with "
+ "ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
+ bond->params.arp_interval = 0;
+ /* Kill ARP timer, else it brings bond's link down */
+ if (bond->mii_timer.function) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Kill ARP timer, else it brings bond's link down...\n",
+ bond->dev->name);
+ del_timer_sync(&bond->arp_timer);
+ }
+ }
+
+ if (bond->dev->flags & IFF_UP) {
+ /* If the interface is up, we may need to fire off
+ * the MII timer. If the interface is down, the
+ * timer will get fired off when the open function
+ * is called.
+ */
+ if (bond->mii_timer.function) {
+ /* The timer's already set up, so fire it off */
+ mod_timer(&bond->mii_timer, jiffies + 1);
+ } else {
+ /* Set up the timer. */
+ init_timer(&bond->mii_timer);
+ bond->mii_timer.expires = jiffies + 1;
+ bond->mii_timer.data =
+ (unsigned long) bond->dev;
+ bond->mii_timer.function =
+ (void *) &bond_mii_monitor;
+ add_timer(&bond->mii_timer);
+ }
+ }
+ }
+out:
+ return ret;
+}
+static CLASS_DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon);
+
+/*
+ * Show and set the primary slave. The store function is much
+ * simpler than bonding_store_slaves function because it only needs to
+ * handle one interface name.
+ * The bond must be a mode that supports a primary for this be
+ * set.
+ */
+static ssize_t bonding_show_primary(struct class_device *cd, char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->primary_slave)
+ count = sprintf(buf, "%s\n", bond->primary_slave->dev->name) + 1;
+ else
+ count = sprintf(buf, "\n") + 1;
+
+ return count;
+}
+
+static ssize_t bonding_store_primary(struct class_device *cd, const char *buf, size_t count)
+{
+ int i;
+ struct slave *slave;
+ struct bonding *bond = to_bond(cd);
+
+ write_lock_bh(&bond->lock);
+ if (!USES_PRIMARY(bond->params.mode)) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Unable to set primary slave; %s is in mode %d\n",
+ bond->dev->name, bond->dev->name, bond->params.mode);
+ } else {
+ bond_for_each_slave(bond, slave, i) {
+ if (strnicmp
+ (slave->dev->name, buf,
+ strlen(slave->dev->name)) == 0) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting %s as primary slave.\n",
+ bond->dev->name, slave->dev->name);
+ bond->primary_slave = slave;
+ bond_select_active_slave(bond);
+ goto out;
+ }
+ }
+
+ /* if we got here, then we didn't match the name of any slave */
+
+ if (strlen(buf) == 0 || buf[0] == '\n') {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting primary slave to None.\n",
+ bond->dev->name);
+ bond->primary_slave = 0;
+ bond_select_active_slave(bond);
+ } else {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Unable to set %.*s as primary slave as it is not a slave.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
+ }
+ }
+out:
+ write_unlock_bh(&bond->lock);
+ return count;
+}
+static CLASS_DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary);
+
+/*
+ * Show and set the use_carrier flag.
+ */
+static ssize_t bonding_show_carrier(struct class_device *cd, char *buf)
+{
+ struct bonding *bond = to_bond(cd);
+
+ return sprintf(buf, "%d\n", bond->params.use_carrier) + 1;
+}
+
+static ssize_t bonding_store_carrier(struct class_device *cd, const char *buf, size_t count)
+{
+ int new_value, ret = count;
+ struct bonding *bond = to_bond(cd);
+
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: no use_carrier value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ if ((new_value == 0) || (new_value == 1)) {
+ bond->params.use_carrier = new_value;
+ printk(KERN_INFO DRV_NAME ": %s: Setting use_carrier to %d.\n",
+ bond->dev->name, new_value);
+ } else {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Ignoring invalid use_carrier value %d.\n",
+ bond->dev->name, new_value);
+ }
+out:
+ return count;
+}
+static CLASS_DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier);
+
+
+/*
+ * Show and set currently active_slave.
+ */
+static ssize_t bonding_show_active_slave(struct class_device *cd, char *buf)
+{
+ struct slave *curr;
+ struct bonding *bond = to_bond(cd);
+ int count;
+
+
+ read_lock(&bond->curr_slave_lock);
+ curr = bond->curr_active_slave;
+ read_unlock(&bond->curr_slave_lock);
+
+ if (USES_PRIMARY(bond->params.mode) && curr)
+ count = sprintf(buf, "%s\n", curr->dev->name) + 1;
+ else
+ count = sprintf(buf, "\n") + 1;
+ return count;
+}
+
+static ssize_t bonding_store_active_slave(struct class_device *cd, const char *buf, size_t count)
+{
+ int i;
+ struct slave *slave;
+ struct slave *old_active = NULL;
+ struct slave *new_active = NULL;
+ struct bonding *bond = to_bond(cd);
+
+ write_lock_bh(&bond->lock);
+ if (!USES_PRIMARY(bond->params.mode)) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Unable to change active slave; %s is in mode %d\n",
+ bond->dev->name, bond->dev->name, bond->params.mode);
+ } else {
+ bond_for_each_slave(bond, slave, i) {
+ if (strnicmp
+ (slave->dev->name, buf,
+ strlen(slave->dev->name)) == 0) {
+ old_active = bond->curr_active_slave;
+ new_active = slave;
+ if (new_active && (new_active == old_active)) {
+ /* do nothing */
+ printk(KERN_INFO DRV_NAME
+ ": %s: %s is already the current active slave.\n",
+ bond->dev->name, slave->dev->name);
+ goto out;
+ }
+ else {
+ if ((new_active) &&
+ (old_active) &&
+ (new_active->link == BOND_LINK_UP) &&
+ IS_UP(new_active->dev)) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting %s as active slave.\n",
+ bond->dev->name, slave->dev->name);
+ bond_change_active_slave(bond, new_active);
+ }
+ else {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Could not set %s as active slave; "
+ "either %s is down or the link is down.\n",
+ bond->dev->name, slave->dev->name,
+ slave->dev->name);
+ }
+ goto out;
+ }
+ }
+ }
+
+ /* if we got here, then we didn't match the name of any slave */
+
+ if (strlen(buf) == 0 || buf[0] == '\n') {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Setting active slave to None.\n",
+ bond->dev->name);
+ bond->primary_slave = 0;
+ bond_select_active_slave(bond);
+ } else {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Unable to set %.*s as active slave as it is not a slave.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
+ }
+ }
+out:
+ write_unlock_bh(&bond->lock);
+ return count;
+
+}
+static CLASS_DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave);
+
+
+/*
+ * Show link status of the bond interface.
+ */
+static ssize_t bonding_show_mii_status(struct class_device *cd, char *buf)
+{
+ struct slave *curr;
+ struct bonding *bond = to_bond(cd);
+
+ read_lock(&bond->curr_slave_lock);
+ curr = bond->curr_active_slave;
+ read_unlock(&bond->curr_slave_lock);
+
+ return sprintf(buf, "%s\n", (curr) ? "up" : "down") + 1;
+}
+static CLASS_DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
+
+
+/*
+ * Show current 802.3ad aggregator ID.
+ */
+static ssize_t bonding_show_ad_aggregator(struct class_device *cd, char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->params.mode == BOND_MODE_8023AD) {
+ struct ad_info ad_info;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.aggregator_id) + 1;
+ }
+ else
+ count = sprintf(buf, "\n") + 1;
+
+ return count;
+}
+static CLASS_DEVICE_ATTR(ad_aggregator, S_IRUGO, bonding_show_ad_aggregator, NULL);
+
+
+/*
+ * Show number of active 802.3ad ports.
+ */
+static ssize_t bonding_show_ad_num_ports(struct class_device *cd, char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->params.mode == BOND_MODE_8023AD) {
+ struct ad_info ad_info;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0: ad_info.ports) + 1;
+ }
+ else
+ count = sprintf(buf, "\n") + 1;
+
+ return count;
+}
+static CLASS_DEVICE_ATTR(ad_num_ports, S_IRUGO, bonding_show_ad_num_ports, NULL);
+
+
+/*
+ * Show current 802.3ad actor key.
+ */
+static ssize_t bonding_show_ad_actor_key(struct class_device *cd, char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->params.mode == BOND_MODE_8023AD) {
+ struct ad_info ad_info;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.actor_key) + 1;
+ }
+ else
+ count = sprintf(buf, "\n") + 1;
+
+ return count;
+}
+static CLASS_DEVICE_ATTR(ad_actor_key, S_IRUGO, bonding_show_ad_actor_key, NULL);
+
+
+/*
+ * Show current 802.3ad partner key.
+ */
+static ssize_t bonding_show_ad_partner_key(struct class_device *cd, char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->params.mode == BOND_MODE_8023AD) {
+ struct ad_info ad_info;
+ count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.partner_key) + 1;
+ }
+ else
+ count = sprintf(buf, "\n") + 1;
+
+ return count;
+}
+static CLASS_DEVICE_ATTR(ad_partner_key, S_IRUGO, bonding_show_ad_partner_key, NULL);
+
+
+/*
+ * Show current 802.3ad partner mac.
+ */
+static ssize_t bonding_show_ad_partner_mac(struct class_device *cd, char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(cd);
+
+ if (bond->params.mode == BOND_MODE_8023AD) {
+ struct ad_info ad_info;
+ if (!bond_3ad_get_active_agg_info(bond, &ad_info)) {
+ count = sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x\n",
+ ad_info.partner_system[0],
+ ad_info.partner_system[1],
+ ad_info.partner_system[2],
+ ad_info.partner_system[3],
+ ad_info.partner_system[4],
+ ad_info.partner_system[5]) + 1;
+ }
+ }
+ else
+ count = sprintf(buf, "\n") + 1;
+
+ return count;
+}
+static CLASS_DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, NULL);
+
+
+
+static struct attribute *per_bond_attrs[] = {
+ &class_device_attr_slaves.attr,
+ &class_device_attr_mode.attr,
+ &class_device_attr_arp_interval.attr,
+ &class_device_attr_arp_ip_target.attr,
+ &class_device_attr_downdelay.attr,
+ &class_device_attr_updelay.attr,
+ &class_device_attr_lacp_rate.attr,
+ &class_device_attr_xmit_hash_policy.attr,
+ &class_device_attr_miimon.attr,
+ &class_device_attr_primary.attr,
+ &class_device_attr_use_carrier.attr,
+ &class_device_attr_active_slave.attr,
+ &class_device_attr_mii_status.attr,
+ &class_device_attr_ad_aggregator.attr,
+ &class_device_attr_ad_num_ports.attr,
+ &class_device_attr_ad_actor_key.attr,
+ &class_device_attr_ad_partner_key.attr,
+ &class_device_attr_ad_partner_mac.attr,
+ NULL,
+};
+
+static struct attribute_group bonding_group = {
+ .name = "bonding",
+ .attrs = per_bond_attrs,
+};
+
+/*
+ * Initialize sysfs. This sets up the bonding_masters file in
+ * /sys/class/net.
+ */
+int bond_create_sysfs(void)
+{
+ int ret = 0;
+ struct bonding *firstbond;
+
+ init_rwsem(&bonding_rwsem);
+
+ /* get the netdev class pointer */
+ firstbond = container_of(bond_dev_list.next, struct bonding, bond_list);
+ if (!firstbond)
+ return -ENODEV;
+
+ netdev_class = firstbond->dev->class_dev.class;
+ if (!netdev_class)
+ return -ENODEV;
+
+ ret = class_create_file(netdev_class, &class_attr_bonding_masters);
+
+ return ret;
+
+}
+
+/*
+ * Remove /sys/class/net/bonding_masters.
+ */
+void bond_destroy_sysfs(void)
+{
+ if (netdev_class)
+ class_remove_file(netdev_class, &class_attr_bonding_masters);
+}
+
+/*
+ * Initialize sysfs for each bond. This sets up and registers
+ * the 'bondctl' directory for each individual bond under /sys/class/net.
+ */
+int bond_create_sysfs_entry(struct bonding *bond)
+{
+ struct net_device *dev = bond->dev;
+ int err;
+
+ err = sysfs_create_group(&(dev->class_dev.kobj), &bonding_group);
+ if (err) {
+ printk(KERN_EMERG "eek! didn't create group!\n");
+ }
+
+ if (expected_refcount < 1)
+ expected_refcount = atomic_read(&bond->dev->class_dev.kobj.kref.refcount);
+
+ return err;
+}
+/*
+ * Remove sysfs entries for each bond.
+ */
+void bond_destroy_sysfs_entry(struct bonding *bond)
+{
+ struct net_device *dev = bond->dev;
+
+ sysfs_remove_group(&(dev->class_dev.kobj), &bonding_group);
+}
+
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 1433e91db0f..015c7f1d1bc 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -10,25 +10,6 @@
* This software may be used and distributed according to the terms
* of the GNU Public License, incorporated herein by reference.
*
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
- * Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for IEEE 802.3ad Dynamic link aggregation mode.
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Amir Noam <amir.noam at intel dot com>
- * - Code beautification and style changes (mainly in comments).
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for Transmit load balancing mode.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
- *
- * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
- * - added "xmit_policy" kernel parameter for alternate hashing policy
- * support for mode 2
*/
#ifndef _LINUX_BONDING_H
@@ -37,11 +18,12 @@
#include <linux/timer.h>
#include <linux/proc_fs.h>
#include <linux/if_bonding.h>
+#include <linux/kobject.h>
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "2.6.5"
-#define DRV_RELDATE "November 4, 2005"
+#define DRV_VERSION "3.0.0"
+#define DRV_RELDATE "November 8, 2005"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
@@ -152,6 +134,11 @@ struct bond_params {
u32 arp_targets[BOND_MAX_ARP_TARGETS];
};
+struct bond_parm_tbl {
+ char *modename;
+ int mode;
+};
+
struct vlan_entry {
struct list_head vlan_list;
u32 vlan_ip;
@@ -159,7 +146,7 @@ struct vlan_entry {
};
struct slave {
- struct net_device *dev; /* first - usefull for panic debug */
+ struct net_device *dev; /* first - useful for panic debug */
struct slave *next;
struct slave *prev;
s16 delay;
@@ -185,7 +172,7 @@ struct slave {
* beforehand.
*/
struct bonding {
- struct net_device *dev; /* first - usefull for panic debug */
+ struct net_device *dev; /* first - useful for panic debug */
struct slave *first_slave;
struct slave *curr_active_slave;
struct slave *current_arp_slave;
@@ -255,6 +242,25 @@ extern inline void bond_set_slave_active_flags(struct slave *slave)
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
+int bond_create(char *name, struct bond_params *params, struct bonding **newbond);
+void bond_deinit(struct net_device *bond_dev);
+int bond_create_sysfs(void);
+void bond_destroy_sysfs(void);
+void bond_destroy_sysfs_entry(struct bonding *bond);
+int bond_create_sysfs_entry(struct bonding *bond);
+int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave);
+void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave);
+int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev);
+int bond_release(struct net_device *bond_dev, struct net_device *slave_dev);
+int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev);
+void bond_mii_monitor(struct net_device *bond_dev);
+void bond_loadbalance_arp_mon(struct net_device *bond_dev);
+void bond_activebackup_arp_mon(struct net_device *bond_dev);
+void bond_set_mode_ops(struct bonding *bond, int mode);
+int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl);
+const char *bond_mode_name(int mode);
+void bond_select_active_slave(struct bonding *bond);
+void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
#endif /* _LINUX_BONDING_H */
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 53b41d99b00..2c5b849b7ba 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1332,8 +1332,8 @@ intr_handler_t t1_select_intr_handler(adapter_t *adapter)
*
* This runs with softirqs disabled.
*/
-unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
- unsigned int qid, struct net_device *dev)
+static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+ unsigned int qid, struct net_device *dev)
{
struct sge *sge = adapter->sge;
struct cmdQ *q = &sge->cmdQ[qid];
@@ -1352,9 +1352,10 @@ unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
set_bit(dev->if_port, &sge->stopped_tx_queues);
sge->stats.cmdQ_full[3]++;
spin_unlock(&q->lock);
- CH_ERR("%s: Tx ring full while queue awake!\n",
- adapter->name);
- return 1;
+ if (!netif_queue_stopped(dev))
+ CH_ERR("%s: Tx ring full while queue awake!\n",
+ adapter->name);
+ return NETDEV_TX_BUSY;
}
if (unlikely(credits - count < q->stop_thres)) {
sge->stats.cmdQ_full[3]++;
@@ -1389,7 +1390,7 @@ unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
}
}
- return 0;
+ return NETDEV_TX_OK;
}
#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14))
@@ -1449,7 +1450,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(skb->len < ETH_HLEN ||
skb->len > dev->mtu + eth_hdr_len(skb->data))) {
dev_kfree_skb_any(skb);
- return NET_XMIT_SUCCESS;
+ return NETDEV_TX_OK;
}
/*
@@ -1467,7 +1468,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
skb = skb_realloc_headroom(skb, sizeof(*cpl));
dev_kfree_skb_any(orig_skb);
if (!skb)
- return -ENOMEM;
+ return NETDEV_TX_OK;
}
if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
@@ -1475,7 +1476,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
skb->nh.iph->protocol == IPPROTO_UDP)
if (unlikely(skb_checksum_help(skb, 0))) {
dev_kfree_skb_any(skb);
- return -ENOMEM;
+ return NETDEV_TX_OK;
}
/* Hmmm, assuming to catch the gratious arp... and we'll use
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h
index 434b2558685..6d0d24a6364 100644
--- a/drivers/net/chelsio/sge.h
+++ b/drivers/net/chelsio/sge.h
@@ -89,8 +89,6 @@ int t1_sge_configure(struct sge *, struct sge_params *);
int t1_sge_set_coalesce_params(struct sge *, struct sge_params *);
void t1_sge_destroy(struct sge *);
intr_handler_t t1_select_intr_handler(adapter_t *adapter);
-unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
- unsigned int qid, struct net_device *netdev);
int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
void t1_set_vlan_accel(struct adapter *adapter, int on_off);
void t1_sge_start(struct sge *);
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3f653a93e1b..e02e9ba2e18 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -188,11 +188,13 @@ struct e1000_tx_ring {
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
- struct e1000_buffer previous_buffer_info;
spinlock_t tx_lock;
uint16_t tdh;
uint16_t tdt;
uint64_t pkt;
+
+ boolean_t last_tx_tso;
+
};
struct e1000_rx_ring {
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 8eae8ba27e8..c88f1a3c1b1 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -562,10 +562,29 @@ e1000_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+ uint16_t eeprom_data;
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
- strncpy(drvinfo->fw_version, "N/A", 32);
+
+ /* EEPROM image version # is reported as firware version # for
+ * 8257{1|2|3} controllers */
+ e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data);
+ switch (adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+ break;
+ default:
+ sprintf(firmware_version, "n/a");
+ }
+
+ strncpy(drvinfo->fw_version, firmware_version, 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
drvinfo->n_stats = E1000_STATS_LEN;
drvinfo->testinfo_len = E1000_TEST_LEN;
@@ -960,13 +979,21 @@ e1000_free_desc_rings(struct e1000_adapter *adapter)
}
}
- if(txdr->desc)
+ if(txdr->desc) {
pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
- if(rxdr->desc)
+ txdr->desc = NULL;
+ }
+ if(rxdr->desc) {
pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
+ rxdr->desc = NULL;
+ }
kfree(txdr->buffer_info);
+ txdr->buffer_info = NULL;
+
kfree(rxdr->buffer_info);
+ rxdr->buffer_info = NULL;
+
return;
}
@@ -1301,21 +1328,32 @@ static int
e1000_setup_loopback_test(struct e1000_adapter *adapter)
{
uint32_t rctl;
+ struct e1000_hw *hw = &adapter->hw;
- if(adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) {
- if(adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ||
- adapter->hw.mac_type == e1000_82545_rev_3 ||
- adapter->hw.mac_type == e1000_82546_rev_3)
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
return e1000_set_phy_loopback(adapter);
- else {
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+#define E1000_SERDES_LB_ON 0x410
+ e1000_set_phy_loopback(adapter);
+ E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON);
+ msec_delay(10);
+ return 0;
+ break;
+ default:
+ rctl = E1000_READ_REG(hw, RCTL);
rctl |= E1000_RCTL_LBM_TCVR;
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_REG(hw, RCTL, rctl);
return 0;
}
- } else if(adapter->hw.media_type == e1000_media_type_copper)
+ } else if (hw->media_type == e1000_media_type_copper)
return e1000_set_phy_loopback(adapter);
return 7;
@@ -1326,25 +1364,36 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
{
uint32_t rctl;
uint16_t phy_reg;
+ struct e1000_hw *hw = &adapter->hw;
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- if(adapter->hw.media_type == e1000_media_type_copper ||
- ((adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) &&
- (adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ||
- adapter->hw.mac_type == e1000_82545_rev_3 ||
- adapter->hw.mac_type == e1000_82546_rev_3))) {
- adapter->hw.autoneg = TRUE;
- e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
- if(phy_reg & MII_CR_LOOPBACK) {
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes){
+#define E1000_SERDES_LB_OFF 0x400
+ E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF);
+ msec_delay(10);
+ break;
+ }
+ /* fall thru for Cu adapters */
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = TRUE;
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
- e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
- e1000_phy_reset(&adapter->hw);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
}
+ break;
}
}
@@ -1440,9 +1489,11 @@ static int
e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data)
{
if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback;
- if((*data = e1000_setup_loopback_test(adapter))) goto err_loopback;
+ if((*data = e1000_setup_loopback_test(adapter)))
+ goto err_loopback_setup;
*data = e1000_run_loopback_test(adapter);
e1000_loopback_cleanup(adapter);
+err_loopback_setup:
e1000_free_desc_rings(adapter);
err_loopback:
return *data;
@@ -1671,6 +1722,14 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
msleep_interruptible(data * 1000);
del_timer_sync(&adapter->blink_timer);
}
+ else if(adapter->hw.mac_type < e1000_82573) {
+ E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
+ E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
+ (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
+ (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
+ msleep_interruptible(data * 1000);
+ }
else {
E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index a267c5235fc..136fc031e4a 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -563,11 +563,13 @@ e1000_reset_hw(struct e1000_hw *hw)
msec_delay(20);
break;
case e1000_82573:
- udelay(10);
- ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH(hw);
+ if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
+ udelay(10);
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ }
/* fall through */
case e1000_82571:
case e1000_82572:
@@ -844,19 +846,27 @@ e1000_setup_link(struct e1000_hw *hw)
* control setting, then the variable hw->fc will
* be initialized based on a value in the EEPROM.
*/
- if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
-
- if(hw->fc == e1000_fc_default) {
- if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
- hw->fc = e1000_fc_none;
- else if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
- EEPROM_WORD0F_ASM_DIR)
- hw->fc = e1000_fc_tx_pause;
- else
+ if (hw->fc == e1000_fc_default) {
+ switch (hw->mac_type) {
+ case e1000_82573:
hw->fc = e1000_fc_full;
+ break;
+ default:
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = e1000_fc_none;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = e1000_fc_tx_pause;
+ else
+ hw->fc = e1000_fc_full;
+ break;
+ }
}
/* We want to save off the original Flow Control configuration just
@@ -2962,13 +2972,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
if(hw->mac_type > e1000_82543) {
/* Read the device control register and assert the E1000_CTRL_PHY_RST
* bit. Then, take it out of reset.
+ * For pre-e1000_82571 hardware, we delay for 10ms between the assert
+ * and deassert. For e1000_82571 hardware and later, we instead delay
+ * for 10ms after the deassertion.
*/
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
E1000_WRITE_FLUSH(hw);
- msec_delay(10);
+
+ if (hw->mac_type < e1000_82571)
+ msec_delay(10);
+
E1000_WRITE_REG(hw, CTRL, ctrl);
E1000_WRITE_FLUSH(hw);
+
+ if (hw->mac_type >= e1000_82571)
+ msec_delay(10);
} else {
/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
* bit to put the PHY into reset. Then, take it out of reset.
@@ -5278,11 +5297,15 @@ e1000_get_bus_info(struct e1000_hw *hw)
hw->bus_speed = e1000_bus_speed_unknown;
hw->bus_width = e1000_bus_width_unknown;
break;
- case e1000_82571:
case e1000_82572:
case e1000_82573:
hw->bus_type = e1000_bus_type_pci_express;
hw->bus_speed = e1000_bus_speed_2500;
+ hw->bus_width = e1000_bus_width_pciex_1;
+ break;
+ case e1000_82571:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
hw->bus_width = e1000_bus_width_pciex_4;
break;
default:
@@ -6650,6 +6673,12 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
break;
}
+ /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
+ * Need to wait for PHY configuration completion before accessing NVM
+ * and PHY. */
+ if (hw->mac_type == e1000_82573)
+ msec_delay(25);
+
return E1000_SUCCESS;
}
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 76ce12809a1..7caa35748ce 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -123,6 +123,7 @@ typedef enum {
e1000_bus_width_32,
e1000_bus_width_64,
e1000_bus_width_pciex_1,
+ e1000_bus_width_pciex_2,
e1000_bus_width_pciex_4,
e1000_bus_width_reserved
} e1000_bus_width;
@@ -149,6 +150,7 @@ typedef enum {
e1000_igp_cable_length_90 = 90,
e1000_igp_cable_length_100 = 100,
e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
e1000_igp_cable_length_120 = 120,
e1000_igp_cable_length_130 = 130,
e1000_igp_cable_length_140 = 140,
@@ -1457,6 +1459,7 @@ struct e1000_hw {
#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
#define E1000_STM_OPCODE 0xDB00
#define E1000_HICR_FW_RESET 0xC0
@@ -1951,7 +1954,6 @@ struct e1000_host_command_info {
#define E1000_MDALIGN 4096
-#define E1000_GCR_BEM32 0x00400000
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */
#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index e0ae248b431..438a931fd55 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -711,6 +711,7 @@ e1000_probe(struct pci_dev *pdev,
break;
case e1000_82546:
case e1000_82546_rev_3:
+ case e1000_82571:
if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
&& (adapter->hw.media_type == e1000_media_type_copper)) {
e1000_read_eeprom(&adapter->hw,
@@ -1158,7 +1159,6 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
- memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer));
/* round up to nearest 4K */
@@ -1813,11 +1813,6 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter,
/* Free all the Tx ring sk_buffs */
- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
- e1000_unmap_and_free_tx_resource(adapter,
- &tx_ring->previous_buffer_info);
- }
-
for(i = 0; i < tx_ring->count; i++) {
buffer_info = &tx_ring->buffer_info[i];
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
@@ -1832,6 +1827,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter,
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
writel(0, adapter->hw.hw_addr + tx_ring->tdh);
writel(0, adapter->hw.hw_addr + tx_ring->tdt);
@@ -2437,6 +2433,16 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
buffer_info = &tx_ring->buffer_info[i];
size = min(len, max_per_txd);
#ifdef NETIF_F_TSO
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMAd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_shinfo(skb)->tso_size) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
if(unlikely(mss && !nr_frags && size == len && size > 8))
@@ -2693,6 +2699,14 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if(skb->ip_summed == CHECKSUM_HW)
count++;
#endif
+
+#ifdef NETIF_F_TSO
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_shinfo(skb)->tso_size)
+ count++;
+#endif
+
count += TXD_USE_COUNT(len, max_txd_pwr);
if(adapter->pcix_82544)
@@ -2774,9 +2788,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
return NETDEV_TX_OK;
}
- if (likely(tso))
+ if (likely(tso)) {
+ tx_ring->last_tx_tso = 1;
tx_flags |= E1000_TX_FLAGS_TSO;
- else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
tx_flags |= E1000_TX_FLAGS_CSUM;
/* Old method was to assume IPv4 packet by default if TSO was enabled.
@@ -3227,37 +3242,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
eop_desc = E1000_TX_DESC(*tx_ring, eop);
while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
- /* Premature writeback of Tx descriptors clear (free buffers
- * and unmap pci_mapping) previous_buffer_info */
- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
- e1000_unmap_and_free_tx_resource(adapter,
- &tx_ring->previous_buffer_info);
- }
-
for(cleaned = FALSE; !cleaned; ) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
-#ifdef NETIF_F_TSO
- if (!(netdev->features & NETIF_F_TSO)) {
-#endif
- e1000_unmap_and_free_tx_resource(adapter,
- buffer_info);
-#ifdef NETIF_F_TSO
- } else {
- if (cleaned) {
- memcpy(&tx_ring->previous_buffer_info,
- buffer_info,
- sizeof(struct e1000_buffer));
- memset(buffer_info, 0,
- sizeof(struct e1000_buffer));
- } else {
- e1000_unmap_and_free_tx_resource(
- adapter, buffer_info);
- }
- }
-#endif
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
tx_desc->buffer_addr = 0;
tx_desc->lower.data = 0;
@@ -3318,12 +3308,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
netif_stop_queue(netdev);
}
}
-#ifdef NETIF_F_TSO
- if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ)))
- e1000_unmap_and_free_tx_resource(
- adapter, &tx_ring->previous_buffer_info);
-#endif
return cleaned;
}
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 0f030b73cbb..146f9513aea 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2,7 +2,8 @@
* drivers/net/gianfar.c
*
* Gianfar Ethernet Driver
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
+ * This driver is designed for the non-CPM ethernet controllers
+ * on the 85xx and 83xx family of integrated processors
* Based on 8260_io/fcc_enet.c
*
* Author: Andy Fleming
@@ -22,8 +23,6 @@
* B-V +1.62
*
* Theory of operation
- * This driver is designed for the non-CPM ethernet controllers
- * on the 85xx and 83xx family of integrated processors
*
* The driver is initialized through platform_device. Structures which
* define the configuration needed by the board are defined in a
@@ -110,7 +109,7 @@
#endif
const char gfar_driver_name[] = "Gianfar Ethernet";
-const char gfar_driver_version[] = "1.2";
+const char gfar_driver_version[] = "1.3";
static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
@@ -139,6 +138,10 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l
static void gfar_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp);
static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+void gfar_halt(struct net_device *dev);
+void gfar_start(struct net_device *dev);
+static void gfar_clear_exact_match(struct net_device *dev);
+static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
extern struct ethtool_ops gfar_ethtool_ops;
@@ -146,12 +149,10 @@ MODULE_AUTHOR("Freescale Semiconductor, Inc");
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
MODULE_LICENSE("GPL");
-int gfar_uses_fcb(struct gfar_private *priv)
+/* Returns 1 if incoming frames use an FCB */
+static inline int gfar_uses_fcb(struct gfar_private *priv)
{
- if (priv->vlan_enable || priv->rx_csum_enable)
- return 1;
- else
- return 0;
+ return (priv->vlan_enable || priv->rx_csum_enable);
}
/* Set up the ethernet device structure, private data,
@@ -320,15 +321,10 @@ static int gfar_probe(struct platform_device *pdev)
else
priv->padding = 0;
- dev->hard_header_len += priv->padding;
-
if (dev->features & NETIF_F_IP_CSUM)
dev->hard_header_len += GMAC_FCB_LEN;
priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
-#ifdef CONFIG_GFAR_BUFSTASH
- priv->rx_stash_size = STASH_LENGTH;
-#endif
priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
@@ -350,6 +346,9 @@ static int gfar_probe(struct platform_device *pdev)
goto register_fail;
}
+ /* Create all the sysfs files */
+ gfar_init_sysfs(dev);
+
/* Print out the device info */
printk(KERN_INFO DEVICE_NAME, dev->name);
for (idx = 0; idx < 6; idx++)
@@ -357,8 +356,7 @@ static int gfar_probe(struct platform_device *pdev)
printk("\n");
/* Even more device info helps when determining which kernel */
- /* provided which set of benchmarks. Since this is global for all */
- /* devices, we only print it once */
+ /* provided which set of benchmarks. */
#ifdef CONFIG_GFAR_NAPI
printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
#else
@@ -463,19 +461,9 @@ static void init_registers(struct net_device *dev)
/* Initialize the max receive buffer length */
gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
-#ifdef CONFIG_GFAR_BUFSTASH
- /* If we are stashing buffers, we need to set the
- * extraction length to the size of the buffer */
- gfar_write(&priv->regs->attreli, priv->rx_stash_size << 16);
-#endif
-
/* Initialize the Minimum Frame Length Register */
gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
- /* Setup Attributes so that snooping is on for rx */
- gfar_write(&priv->regs->attr, ATTR_INIT_SETTINGS);
- gfar_write(&priv->regs->attreli, ATTRELI_INIT_SETTINGS);
-
/* Assign the TBI an address which won't conflict with the PHYs */
gfar_write(&priv->regs->tbipa, TBIPA_VALUE);
}
@@ -577,8 +565,7 @@ static void free_skb_resources(struct gfar_private *priv)
for (i = 0; i < priv->rx_ring_size; i++) {
if (priv->rx_skbuff[i]) {
dma_unmap_single(NULL, rxbdp->bufPtr,
- priv->rx_buffer_size
- + RXBUF_ALIGNMENT,
+ priv->rx_buffer_size,
DMA_FROM_DEVICE);
dev_kfree_skb_any(priv->rx_skbuff[i]);
@@ -636,6 +623,7 @@ int startup_gfar(struct net_device *dev)
struct gfar *regs = priv->regs;
int err = 0;
u32 rctrl = 0;
+ u32 attrs = 0;
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
@@ -795,18 +783,50 @@ int startup_gfar(struct net_device *dev)
if (priv->rx_csum_enable)
rctrl |= RCTRL_CHECKSUMMING;
- if (priv->extended_hash)
+ if (priv->extended_hash) {
rctrl |= RCTRL_EXTHASH;
+ gfar_clear_exact_match(dev);
+ rctrl |= RCTRL_EMEN;
+ }
+
if (priv->vlan_enable)
rctrl |= RCTRL_VLAN;
+ if (priv->padding) {
+ rctrl &= ~RCTRL_PAL_MASK;
+ rctrl |= RCTRL_PADDING(priv->padding);
+ }
+
/* Init rctrl based on our settings */
gfar_write(&priv->regs->rctrl, rctrl);
if (dev->features & NETIF_F_IP_CSUM)
gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
+ /* Set the extraction length and index */
+ attrs = ATTRELI_EL(priv->rx_stash_size) |
+ ATTRELI_EI(priv->rx_stash_index);
+
+ gfar_write(&priv->regs->attreli, attrs);
+
+ /* Start with defaults, and add stashing or locking
+ * depending on the approprate variables */
+ attrs = ATTR_INIT_SETTINGS;
+
+ if (priv->bd_stash_en)
+ attrs |= ATTR_BDSTASH;
+
+ if (priv->rx_stash_size != 0)
+ attrs |= ATTR_BUFSTASH;
+
+ gfar_write(&priv->regs->attr, attrs);
+
+ gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
+ gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
+ gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
+
+ /* Start the controller */
gfar_start(dev);
return 0;
@@ -851,34 +871,32 @@ static int gfar_enet_open(struct net_device *dev)
return err;
}
-static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
+static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
{
struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
memset(fcb, 0, GMAC_FCB_LEN);
- /* Flag the bd so the controller looks for the FCB */
- bdp->status |= TXBD_TOE;
-
return fcb;
}
static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
{
- int len;
+ u8 flags = 0;
/* If we're here, it's a IP packet with a TCP or UDP
* payload. We set it to checksum, using a pseudo-header
* we provide
*/
- fcb->ip = 1;
- fcb->tup = 1;
- fcb->ctu = 1;
- fcb->nph = 1;
+ flags = TXFCB_DEFAULT;
- /* Notify the controller what the protocol is */
- if (skb->nh.iph->protocol == IPPROTO_UDP)
- fcb->udp = 1;
+ /* Tell the controller what the protocol is */
+ /* And provide the already calculated phcs */
+ if (skb->nh.iph->protocol == IPPROTO_UDP) {
+ flags |= TXFCB_UDP;
+ fcb->phcs = skb->h.uh->check;
+ } else
+ fcb->phcs = skb->h.th->check;
/* l3os is the distance between the start of the
* frame (skb->data) and the start of the IP hdr.
@@ -887,17 +905,12 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN);
fcb->l4os = (u16)(skb->h.raw - skb->nh.raw);
- len = skb->nh.iph->tot_len - fcb->l4os;
-
- /* Provide the pseudoheader csum */
- fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr,
- skb->nh.iph->daddr, len,
- skb->nh.iph->protocol, 0);
+ fcb->flags = flags;
}
-void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
+void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
{
- fcb->vln = 1;
+ fcb->flags |= TXFCB_VLN;
fcb->vlctl = vlan_tx_tag_get(skb);
}
@@ -908,6 +921,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
struct gfar_private *priv = netdev_priv(dev);
struct txfcb *fcb = NULL;
struct txbd8 *txbdp;
+ u16 status;
/* Update transmit stats */
priv->stats.tx_bytes += skb->len;
@@ -919,19 +933,22 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
txbdp = priv->cur_tx;
/* Clear all but the WRAP status flags */
- txbdp->status &= TXBD_WRAP;
+ status = txbdp->status & TXBD_WRAP;
/* Set up checksumming */
- if ((dev->features & NETIF_F_IP_CSUM)
- && (CHECKSUM_HW == skb->ip_summed)) {
+ if (likely((dev->features & NETIF_F_IP_CSUM)
+ && (CHECKSUM_HW == skb->ip_summed))) {
fcb = gfar_add_fcb(skb, txbdp);
+ status |= TXBD_TOE;
gfar_tx_checksum(skb, fcb);
}
if (priv->vlan_enable &&
unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) {
- if (NULL == fcb)
+ if (unlikely(NULL == fcb)) {
fcb = gfar_add_fcb(skb, txbdp);
+ status |= TXBD_TOE;
+ }
gfar_tx_vlan(skb, fcb);
}
@@ -949,14 +966,16 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
(priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size);
/* Flag the BD as interrupt-causing */
- txbdp->status |= TXBD_INTERRUPT;
+ status |= TXBD_INTERRUPT;
/* Flag the BD as ready to go, last in frame, and */
/* in need of CRC */
- txbdp->status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
+ status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
dev->trans_start = jiffies;
+ txbdp->status = status;
+
/* If this was the last BD in the ring, the next one */
/* is at the beginning of the ring */
if (txbdp->status & TXBD_WRAP)
@@ -1010,21 +1029,7 @@ static struct net_device_stats * gfar_get_stats(struct net_device *dev)
/* Changes the mac address if the controller is not running. */
int gfar_set_mac_address(struct net_device *dev)
{
- struct gfar_private *priv = netdev_priv(dev);
- int i;
- char tmpbuf[MAC_ADDR_LEN];
- u32 tempval;
-
- /* Now copy it into the mac registers backwards, cuz */
- /* little endian is silly */
- for (i = 0; i < MAC_ADDR_LEN; i++)
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->dev_addr[i];
-
- gfar_write(&priv->regs->macstnaddr1, *((u32 *) (tmpbuf)));
-
- tempval = *((u32 *) (tmpbuf + 4));
-
- gfar_write(&priv->regs->macstnaddr2, tempval);
+ gfar_set_mac_for_addr(dev, 0, dev->dev_addr);
return 0;
}
@@ -1110,7 +1115,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
INCREMENTAL_BUFFER_SIZE;
/* Only stop and start the controller if it isn't already
- * stopped */
+ * stopped, and we changed something */
if ((oldsize != tempsize) && (dev->flags & IFF_UP))
stop_gfar(dev);
@@ -1220,6 +1225,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
{
+ unsigned int alignamount;
struct gfar_private *priv = netdev_priv(dev);
struct sk_buff *skb = NULL;
unsigned int timeout = SKB_ALLOC_TIMEOUT;
@@ -1231,18 +1237,18 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
if (NULL == skb)
return NULL;
+ alignamount = RXBUF_ALIGNMENT -
+ (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1));
+
/* We need the data buffer to be aligned properly. We will reserve
* as many bytes as needed to align the data properly
*/
- skb_reserve(skb,
- RXBUF_ALIGNMENT -
- (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1)));
+ skb_reserve(skb, alignamount);
skb->dev = dev;
bdp->bufPtr = dma_map_single(NULL, skb->data,
- priv->rx_buffer_size + RXBUF_ALIGNMENT,
- DMA_FROM_DEVICE);
+ priv->rx_buffer_size, DMA_FROM_DEVICE);
bdp->length = 0;
@@ -1350,7 +1356,7 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb)
/* If valid headers were found, and valid sums
* were verified, then we tell the kernel that no
* checksumming is necessary. Otherwise, it is */
- if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu)
+ if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
@@ -1401,7 +1407,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
skb->protocol = eth_type_trans(skb, dev);
/* Send the packet up the stack */
- if (unlikely(priv->vlgrp && fcb->vln))
+ if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN)))
ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl);
else
ret = RECEIVE(skb);
@@ -1620,6 +1626,7 @@ static void adjust_link(struct net_device *dev)
spin_lock_irqsave(&priv->lock, flags);
if (phydev->link) {
u32 tempval = gfar_read(&regs->maccfg2);
+ u32 ecntrl = gfar_read(&regs->ecntrl);
/* Now we make sure that we can be in full duplex mode.
* If not, we operate in half-duplex mode. */
@@ -1644,6 +1651,13 @@ static void adjust_link(struct net_device *dev)
case 10:
tempval =
((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
+
+ /* Reduced mode distinguishes
+ * between 10 and 100 */
+ if (phydev->speed == SPEED_100)
+ ecntrl |= ECNTRL_R100;
+ else
+ ecntrl &= ~(ECNTRL_R100);
break;
default:
if (netif_msg_link(priv))
@@ -1657,6 +1671,7 @@ static void adjust_link(struct net_device *dev)
}
gfar_write(&regs->maccfg2, tempval);
+ gfar_write(&regs->ecntrl, ecntrl);
if (!priv->oldlink) {
new_state = 1;
@@ -1721,6 +1736,9 @@ static void gfar_set_multi(struct net_device *dev)
gfar_write(&regs->gaddr6, 0xffffffff);
gfar_write(&regs->gaddr7, 0xffffffff);
} else {
+ int em_num;
+ int idx;
+
/* zero out the hash */
gfar_write(&regs->igaddr0, 0x0);
gfar_write(&regs->igaddr1, 0x0);
@@ -1739,18 +1757,47 @@ static void gfar_set_multi(struct net_device *dev)
gfar_write(&regs->gaddr6, 0x0);
gfar_write(&regs->gaddr7, 0x0);
+ /* If we have extended hash tables, we need to
+ * clear the exact match registers to prepare for
+ * setting them */
+ if (priv->extended_hash) {
+ em_num = GFAR_EM_NUM + 1;
+ gfar_clear_exact_match(dev);
+ idx = 1;
+ } else {
+ idx = 0;
+ em_num = 0;
+ }
+
if(dev->mc_count == 0)
return;
/* Parse the list, and set the appropriate bits */
for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
- gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
+ if (idx < em_num) {
+ gfar_set_mac_for_addr(dev, idx,
+ mc_ptr->dmi_addr);
+ idx++;
+ } else
+ gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
}
}
return;
}
+
+/* Clears each of the exact match registers to zero, so they
+ * don't interfere with normal reception */
+static void gfar_clear_exact_match(struct net_device *dev)
+{
+ int idx;
+ u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
+
+ for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
+ gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
+}
+
/* Set the appropriate hash bit for the given addr */
/* The algorithm works like so:
* 1) Take the Destination Address (ie the multicast address), and
@@ -1781,6 +1828,32 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
return;
}
+
+/* There are multiple MAC Address register pairs on some controllers
+ * This function sets the numth pair to a given address
+ */
+static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ int idx;
+ char tmpbuf[MAC_ADDR_LEN];
+ u32 tempval;
+ u32 *macptr = &priv->regs->macstnaddr1;
+
+ macptr += num*2;
+
+ /* Now copy it into the mac registers backwards, cuz */
+ /* little endian is silly */
+ for (idx = 0; idx < MAC_ADDR_LEN; idx++)
+ tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx];
+
+ gfar_write(macptr, *((u32 *) (tmpbuf)));
+
+ tempval = *((u32 *) (tmpbuf + 4));
+
+ gfar_write(macptr+1, tempval);
+}
+
/* GFAR error interrupt handler */
static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
{
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 5065ba82cb7..94a91da84fb 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -90,12 +90,26 @@ extern const char gfar_driver_version[];
#define GFAR_RX_MAX_RING_SIZE 256
#define GFAR_TX_MAX_RING_SIZE 256
+#define GFAR_MAX_FIFO_THRESHOLD 511
+#define GFAR_MAX_FIFO_STARVE 511
+#define GFAR_MAX_FIFO_STARVE_OFF 511
+
#define DEFAULT_RX_BUFFER_SIZE 1536
#define TX_RING_MOD_MASK(size) (size-1)
#define RX_RING_MOD_MASK(size) (size-1)
#define JUMBO_BUFFER_SIZE 9728
#define JUMBO_FRAME_SIZE 9600
+#define DEFAULT_FIFO_TX_THR 0x100
+#define DEFAULT_FIFO_TX_STARVE 0x40
+#define DEFAULT_FIFO_TX_STARVE_OFF 0x80
+#define DEFAULT_BD_STASH 1
+#define DEFAULT_STASH_LENGTH 64
+#define DEFAULT_STASH_INDEX 0
+
+/* The number of Exact Match registers */
+#define GFAR_EM_NUM 15
+
/* Latency of interface clock in nanoseconds */
/* Interface clock latency , in this case, means the
* time described by a value of 1 in the interrupt
@@ -112,11 +126,11 @@ extern const char gfar_driver_version[];
#define DEFAULT_TX_COALESCE 1
#define DEFAULT_TXCOUNT 16
-#define DEFAULT_TXTIME 400
+#define DEFAULT_TXTIME 4
#define DEFAULT_RX_COALESCE 1
#define DEFAULT_RXCOUNT 16
-#define DEFAULT_RXTIME 400
+#define DEFAULT_RXTIME 4
#define TBIPA_VALUE 0x1f
#define MIIMCFG_INIT_VALUE 0x00000007
@@ -147,6 +161,7 @@ extern const char gfar_driver_version[];
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_R100 0x00000008
#define MRBLR_INIT_SETTINGS DEFAULT_RX_BUFFER_SIZE
@@ -181,10 +196,12 @@ extern const char gfar_driver_version[];
#define RCTRL_PRSDEP_MASK 0x000000c0
#define RCTRL_PRSDEP_INIT 0x000000c0
#define RCTRL_PROM 0x00000008
+#define RCTRL_EMEN 0x00000002
#define RCTRL_CHECKSUMMING (RCTRL_IPCSEN \
| RCTRL_TUCSEN | RCTRL_PRSDEP_INIT)
#define RCTRL_EXTHASH (RCTRL_GHTX)
#define RCTRL_VLAN (RCTRL_PRSDEP_INIT)
+#define RCTRL_PADDING(x) ((x << 16) & RCTRL_PAL_MASK)
#define RSTAT_CLEAR_RHALT 0x00800000
@@ -251,28 +268,26 @@ extern const char gfar_driver_version[];
IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \
| IMASK_PERR)
+/* Fifo management */
+#define FIFO_TX_THR_MASK 0x01ff
+#define FIFO_TX_STARVE_MASK 0x01ff
+#define FIFO_TX_STARVE_OFF_MASK 0x01ff
/* Attribute fields */
/* This enables rx snooping for buffers and descriptors */
-#ifdef CONFIG_GFAR_BDSTASH
#define ATTR_BDSTASH 0x00000800
-#else
-#define ATTR_BDSTASH 0x00000000
-#endif
-#ifdef CONFIG_GFAR_BUFSTASH
#define ATTR_BUFSTASH 0x00004000
-#define STASH_LENGTH 64
-#else
-#define ATTR_BUFSTASH 0x00000000
-#endif
#define ATTR_SNOOPING 0x000000c0
-#define ATTR_INIT_SETTINGS (ATTR_SNOOPING \
- | ATTR_BDSTASH | ATTR_BUFSTASH)
+#define ATTR_INIT_SETTINGS ATTR_SNOOPING
#define ATTRELI_INIT_SETTINGS 0x0
+#define ATTRELI_EL_MASK 0x3fff0000
+#define ATTRELI_EL(x) (x << 16)
+#define ATTRELI_EI_MASK 0x00003fff
+#define ATTRELI_EI(x) (x)
/* TxBD status field bits */
@@ -328,6 +343,7 @@ extern const char gfar_driver_version[];
#define RXFCB_CTU 0x0400
#define RXFCB_EIP 0x0200
#define RXFCB_ETU 0x0100
+#define RXFCB_CSUM_MASK 0x0f00
#define RXFCB_PERR_MASK 0x000c
#define RXFCB_PERR_BADL3 0x0008
@@ -339,14 +355,7 @@ struct txbd8
};
struct txfcb {
- u8 vln:1,
- ip:1,
- ip6:1,
- tup:1,
- udp:1,
- cip:1,
- ctu:1,
- nph:1;
+ u8 flags;
u8 reserved;
u8 l4os; /* Level 4 Header Offset */
u8 l3os; /* Level 3 Header Offset */
@@ -362,14 +371,7 @@ struct rxbd8
};
struct rxfcb {
- u16 vln:1,
- ip:1,
- ip6:1,
- tup:1,
- cip:1,
- ctu:1,
- eip:1,
- etu:1;
+ u16 flags;
u8 rq; /* Receive Queue index */
u8 pro; /* Layer 4 Protocol */
u16 reserved;
@@ -688,12 +690,17 @@ struct gfar_private {
spinlock_t lock;
unsigned int rx_buffer_size;
unsigned int rx_stash_size;
+ unsigned int rx_stash_index;
unsigned int tx_ring_size;
unsigned int rx_ring_size;
+ unsigned int fifo_threshold;
+ unsigned int fifo_starve;
+ unsigned int fifo_starve_off;
unsigned char vlan_enable:1,
rx_csum_enable:1,
- extended_hash:1;
+ extended_hash:1,
+ bd_stash_en:1;
unsigned short padding;
struct vlan_group *vlgrp;
/* Info structure initialized by board setup code */
@@ -731,6 +738,6 @@ extern void stop_gfar(struct net_device *dev);
extern void gfar_halt(struct net_device *dev);
extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
int enable, u32 regnum, u32 read);
-void gfar_setup_stashing(struct net_device *dev);
+void gfar_init_sysfs(struct net_device *dev);
#endif /* __GIANFAR_H */
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index cfa3cd7c91a..765e810620f 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -125,7 +125,7 @@ static char stat_gstrings[][ETH_GSTRING_LEN] = {
static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf)
{
struct gfar_private *priv = netdev_priv(dev);
-
+
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON)
memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN);
else
diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h
index e85eb216fb5..d527cf2f9c1 100644
--- a/drivers/net/gianfar_mii.h
+++ b/drivers/net/gianfar_mii.h
@@ -24,6 +24,7 @@
#define MII_READ_COMMAND 0x00000001
#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
+ | SUPPORTED_10baseT_Full \
| SUPPORTED_100baseT_Half \
| SUPPORTED_100baseT_Full \
| SUPPORTED_Autoneg \
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
new file mode 100644
index 00000000000..10d34cb1919
--- /dev/null
+++ b/drivers/net/gianfar_sysfs.c
@@ -0,0 +1,311 @@
+/*
+ * drivers/net/gianfar_sysfs.c
+ *
+ * Gianfar Ethernet Driver
+ * This driver is designed for the non-CPM ethernet controllers
+ * on the 85xx and 83xx family of integrated processors
+ * Based on 8260_io/fcc_enet.c
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright (c) 2002-2005 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Sysfs file creation and management
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include "gianfar.h"
+
+#define GFAR_ATTR(_name) \
+static ssize_t gfar_show_##_name(struct class_device *cdev, char *buf); \
+static ssize_t gfar_set_##_name(struct class_device *cdev, \
+ const char *buf, size_t count); \
+static CLASS_DEVICE_ATTR(_name, 0644, gfar_show_##_name, gfar_set_##_name)
+
+#define GFAR_CREATE_FILE(_dev, _name) \
+ class_device_create_file(&_dev->class_dev, &class_device_attr_##_name)
+
+GFAR_ATTR(bd_stash);
+GFAR_ATTR(rx_stash_size);
+GFAR_ATTR(rx_stash_index);
+GFAR_ATTR(fifo_threshold);
+GFAR_ATTR(fifo_starve);
+GFAR_ATTR(fifo_starve_off);
+
+#define to_net_dev(cd) container_of(cd, struct net_device, class_dev)
+
+static ssize_t gfar_show_bd_stash(struct class_device *cdev, char *buf)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+
+ return sprintf(buf, "%s\n", priv->bd_stash_en? "on" : "off");
+}
+
+static ssize_t gfar_set_bd_stash(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+ int new_setting = 0;
+ u32 temp;
+ unsigned long flags;
+
+ /* Find out the new setting */
+ if (!strncmp("on", buf, count-1) || !strncmp("1", buf, count-1))
+ new_setting = 1;
+ else if (!strncmp("off", buf, count-1) || !strncmp("0", buf, count-1))
+ new_setting = 0;
+ else
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Set the new stashing value */
+ priv->bd_stash_en = new_setting;
+
+ temp = gfar_read(&priv->regs->attr);
+
+ if (new_setting)
+ temp |= ATTR_BDSTASH;
+ else
+ temp &= ~(ATTR_BDSTASH);
+
+ gfar_write(&priv->regs->attr, temp);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
+static ssize_t gfar_show_rx_stash_size(struct class_device *cdev, char *buf)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+
+ return sprintf(buf, "%d\n", priv->rx_stash_size);
+}
+
+static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned int length = simple_strtoul(buf, NULL, 0);
+ u32 temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (length > priv->rx_buffer_size)
+ return count;
+
+ if (length == priv->rx_stash_size)
+ return count;
+
+ priv->rx_stash_size = length;
+
+ temp = gfar_read(&priv->regs->attreli);
+ temp &= ~ATTRELI_EL_MASK;
+ temp |= ATTRELI_EL(length);
+ gfar_write(&priv->regs->attreli, temp);
+
+ /* Turn stashing on/off as appropriate */
+ temp = gfar_read(&priv->regs->attr);
+
+ if (length)
+ temp |= ATTR_BUFSTASH;
+ else
+ temp &= ~(ATTR_BUFSTASH);
+
+ gfar_write(&priv->regs->attr, temp);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
+
+/* Stashing will only be enabled when rx_stash_size != 0 */
+static ssize_t gfar_show_rx_stash_index(struct class_device *cdev, char *buf)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+
+ return sprintf(buf, "%d\n", priv->rx_stash_index);
+}
+
+static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned short index = simple_strtoul(buf, NULL, 0);
+ u32 temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (index > priv->rx_stash_size)
+ return count;
+
+ if (index == priv->rx_stash_index)
+ return count;
+
+ priv->rx_stash_index = index;
+
+ temp = gfar_read(&priv->regs->attreli);
+ temp &= ~ATTRELI_EI_MASK;
+ temp |= ATTRELI_EI(index);
+ gfar_write(&priv->regs->attreli, flags);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
+static ssize_t gfar_show_fifo_threshold(struct class_device *cdev, char *buf)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+
+ return sprintf(buf, "%d\n", priv->fifo_threshold);
+}
+
+static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned int length = simple_strtoul(buf, NULL, 0);
+ u32 temp;
+ unsigned long flags;
+
+ if (length > GFAR_MAX_FIFO_THRESHOLD)
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ priv->fifo_threshold = length;
+
+ temp = gfar_read(&priv->regs->fifo_tx_thr);
+ temp &= ~FIFO_TX_THR_MASK;
+ temp |= length;
+ gfar_write(&priv->regs->fifo_tx_thr, temp);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
+static ssize_t gfar_show_fifo_starve(struct class_device *cdev, char *buf)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+
+ return sprintf(buf, "%d\n", priv->fifo_starve);
+}
+
+
+static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned int num = simple_strtoul(buf, NULL, 0);
+ u32 temp;
+ unsigned long flags;
+
+ if (num > GFAR_MAX_FIFO_STARVE)
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ priv->fifo_starve = num;
+
+ temp = gfar_read(&priv->regs->fifo_tx_starve);
+ temp &= ~FIFO_TX_STARVE_MASK;
+ temp |= num;
+ gfar_write(&priv->regs->fifo_tx_starve, temp);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
+static ssize_t gfar_show_fifo_starve_off(struct class_device *cdev, char *buf)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+
+ return sprintf(buf, "%d\n", priv->fifo_starve_off);
+}
+
+static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct net_device *dev = to_net_dev(cdev);
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned int num = simple_strtoul(buf, NULL, 0);
+ u32 temp;
+ unsigned long flags;
+
+ if (num > GFAR_MAX_FIFO_STARVE_OFF)
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ priv->fifo_starve_off = num;
+
+ temp = gfar_read(&priv->regs->fifo_tx_starve_shutoff);
+ temp &= ~FIFO_TX_STARVE_OFF_MASK;
+ temp |= num;
+ gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
+void gfar_init_sysfs(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+
+ /* Initialize the default values */
+ priv->rx_stash_size = DEFAULT_STASH_LENGTH;
+ priv->rx_stash_index = DEFAULT_STASH_INDEX;
+ priv->fifo_threshold = DEFAULT_FIFO_TX_THR;
+ priv->fifo_starve = DEFAULT_FIFO_TX_STARVE;
+ priv->fifo_starve_off = DEFAULT_FIFO_TX_STARVE_OFF;
+ priv->bd_stash_en = DEFAULT_BD_STASH;
+
+ /* Create our sysfs files */
+ GFAR_CREATE_FILE(dev, bd_stash);
+ GFAR_CREATE_FILE(dev, rx_stash_size);
+ GFAR_CREATE_FILE(dev, rx_stash_index);
+ GFAR_CREATE_FILE(dev, fifo_threshold);
+ GFAR_CREATE_FILE(dev, fifo_starve);
+ GFAR_CREATE_FILE(dev, fifo_starve_off);
+
+}
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index c22c0517883..fa176ffb4ad 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1539,7 +1539,6 @@ static void irda_usb_disconnect(struct usb_interface *intf)
* USB device callbacks
*/
static struct usb_driver irda_driver = {
- .owner = THIS_MODULE,
.name = "irda-usb",
.probe = irda_usb_probe,
.disconnect = irda_usb_disconnect,
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 3961a754e92..31867e4b891 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -1152,7 +1152,6 @@ static int stir_resume(struct usb_interface *intf)
* USB device callbacks
*/
static struct usb_driver irda_driver = {
- .owner = THIS_MODULE,
.name = "stir4200",
.probe = stir_probe,
.disconnect = stir_disconnect,
diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ixp2000/Kconfig
new file mode 100644
index 00000000000..2fec2415651
--- /dev/null
+++ b/drivers/net/ixp2000/Kconfig
@@ -0,0 +1,6 @@
+config ENP2611_MSF_NET
+ tristate "Radisys ENP2611 MSF network interface support"
+ depends on ARCH_ENP2611
+ help
+ This is a driver for the MSF network interface unit in
+ the IXP2400 on the Radisys ENP2611 platform.
diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ixp2000/Makefile
new file mode 100644
index 00000000000..fd38351ceaa
--- /dev/null
+++ b/drivers/net/ixp2000/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o
+
+enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o
diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ixp2000/caleb.c
new file mode 100644
index 00000000000..3595e107df2
--- /dev/null
+++ b/drivers/net/ixp2000/caleb.c
@@ -0,0 +1,137 @@
+/*
+ * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include "caleb.h"
+
+#define CALEB_IDLO 0x00
+#define CALEB_IDHI 0x01
+#define CALEB_RID 0x02
+#define CALEB_RESET 0x03
+#define CALEB_INTREN0 0x04
+#define CALEB_INTREN1 0x05
+#define CALEB_INTRSTAT0 0x06
+#define CALEB_INTRSTAT1 0x07
+#define CALEB_PORTEN 0x08
+#define CALEB_BURST 0x09
+#define CALEB_PORTPAUS 0x0A
+#define CALEB_PORTPAUSD 0x0B
+#define CALEB_PHY0RX 0x10
+#define CALEB_PHY1RX 0x11
+#define CALEB_PHY0TX 0x12
+#define CALEB_PHY1TX 0x13
+#define CALEB_IXPRX_HI_CNTR 0x15
+#define CALEB_PHY0RX_HI_CNTR 0x16
+#define CALEB_PHY1RX_HI_CNTR 0x17
+#define CALEB_IXPRX_CNTR 0x18
+#define CALEB_PHY0RX_CNTR 0x19
+#define CALEB_PHY1RX_CNTR 0x1A
+#define CALEB_IXPTX_CNTR 0x1B
+#define CALEB_PHY0TX_CNTR 0x1C
+#define CALEB_PHY1TX_CNTR 0x1D
+#define CALEB_DEBUG0 0x1E
+#define CALEB_DEBUG1 0x1F
+
+
+static u8 caleb_reg_read(int reg)
+{
+ u8 value;
+
+ value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
+
+// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
+
+ return value;
+}
+
+static void caleb_reg_write(int reg, u8 value)
+{
+ u8 dummy;
+
+// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
+
+ *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
+
+ dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
+ __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+
+void caleb_reset(void)
+{
+ /*
+ * Perform a chip reset.
+ */
+ caleb_reg_write(CALEB_RESET, 0x02);
+ udelay(1);
+
+ /*
+ * Enable all interrupt sources. This is needed to get
+ * meaningful results out of the status bits (register 6
+ * and 7.)
+ */
+ caleb_reg_write(CALEB_INTREN0, 0xff);
+ caleb_reg_write(CALEB_INTREN1, 0x07);
+
+ /*
+ * Set RX and TX FIFO thresholds to 1.5kb.
+ */
+ caleb_reg_write(CALEB_PHY0RX, 0x11);
+ caleb_reg_write(CALEB_PHY1RX, 0x11);
+ caleb_reg_write(CALEB_PHY0TX, 0x11);
+ caleb_reg_write(CALEB_PHY1TX, 0x11);
+
+ /*
+ * Program SPI-3 burst size.
+ */
+ caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets
+// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets
+// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets
+}
+
+void caleb_enable_rx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp |= 1 << port;
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_disable_rx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp &= ~(1 << port);
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_enable_tx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp |= 1 << (port + 4);
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_disable_tx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp &= ~(1 << (port + 4));
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ixp2000/caleb.h
new file mode 100644
index 00000000000..e93a1ef5b8a
--- /dev/null
+++ b/drivers/net/ixp2000/caleb.h
@@ -0,0 +1,22 @@
+/*
+ * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __CALEB_H
+#define __CALEB_H
+
+void caleb_reset(void);
+void caleb_enable_rx(int port);
+void caleb_disable_rx(int port);
+void caleb_enable_tx(int port);
+void caleb_disable_tx(int port);
+
+
+#endif
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
new file mode 100644
index 00000000000..d82651a97ba
--- /dev/null
+++ b/drivers/net/ixp2000/enp2611.c
@@ -0,0 +1,245 @@
+/*
+ * IXP2400 MSF network device driver for the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <asm/arch/uengine.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include "ixpdev.h"
+#include "caleb.h"
+#include "ixp2400-msf.h"
+#include "pm3386.h"
+
+/***********************************************************************
+ * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
+ * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
+ * to the IXP2400.
+ *
+ * +-------------+
+ * SFP GBIC #0 ---+ | +---------+
+ * | PM3386 #0 +-------+ |
+ * SFP GBIC #1 ---+ | | "Caleb" | +---------+
+ * +-------------+ | | | |
+ * | SPI-3 +---------+ IXP2400 |
+ * +-------------+ | bridge | | |
+ * SFP GBIC #2 ---+ | | FPGA | +---------+
+ * | PM3386 #1 +-------+ |
+ * | | +---------+
+ * +-------------+
+ * ^ ^ ^
+ * | 1.25Gbaud | 104MHz | 104MHz
+ * | SERDES ea. | SPI-3 ea. | SPI-3
+ *
+ ***********************************************************************/
+static struct ixp2400_msf_parameters enp2611_msf_parameters =
+{
+ .rx_mode = IXP2400_RX_MODE_UTOPIA_POS |
+ IXP2400_RX_MODE_1x32 |
+ IXP2400_RX_MODE_MPHY |
+ IXP2400_RX_MODE_MPHY_32 |
+ IXP2400_RX_MODE_MPHY_POLLED_STATUS |
+ IXP2400_RX_MODE_MPHY_LEVEL3 |
+ IXP2400_RX_MODE_RBUF_SIZE_64,
+
+ .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
+
+ .rx_poll_ports = 3,
+
+ .rx_channel_mode = {
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
+ },
+
+ .tx_mode = IXP2400_TX_MODE_UTOPIA_POS |
+ IXP2400_TX_MODE_1x32 |
+ IXP2400_TX_MODE_MPHY |
+ IXP2400_TX_MODE_MPHY_32 |
+ IXP2400_TX_MODE_MPHY_POLLED_STATUS |
+ IXP2400_TX_MODE_MPHY_LEVEL3 |
+ IXP2400_TX_MODE_TBUF_SIZE_64,
+
+ .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
+
+ .tx_poll_ports = 3,
+
+ .tx_channel_mode = {
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
+ }
+};
+
+struct enp2611_ixpdev_priv
+{
+ struct ixpdev_priv ixpdev_priv;
+ struct net_device_stats stats;
+};
+
+static struct net_device *nds[3];
+static struct timer_list link_check_timer;
+
+static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
+{
+ struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
+
+ pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
+
+ return &(ip->stats);
+}
+
+/* @@@ Poll the SFP moddef0 line too. */
+/* @@@ Try to use the pm3386 DOOL interrupt as well. */
+static void enp2611_check_link_status(unsigned long __dummy)
+{
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ struct net_device *dev;
+ int status;
+
+ dev = nds[i];
+
+ status = pm3386_is_link_up(i);
+ if (status && !netif_carrier_ok(dev)) {
+ /* @@@ Should report autonegotiation status. */
+ printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
+
+ pm3386_enable_tx(i);
+ caleb_enable_tx(i);
+ netif_carrier_on(dev);
+ } else if (!status && netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
+
+ netif_carrier_off(dev);
+ caleb_disable_tx(i);
+ pm3386_disable_tx(i);
+ }
+ }
+
+ link_check_timer.expires = jiffies + HZ / 10;
+ add_timer(&link_check_timer);
+}
+
+static void enp2611_set_port_admin_status(int port, int up)
+{
+ if (up) {
+ caleb_enable_rx(port);
+
+ pm3386_set_carrier(port, 1);
+ pm3386_enable_rx(port);
+ } else {
+ caleb_disable_tx(port);
+ pm3386_disable_tx(port);
+ /* @@@ Flush out pending packets. */
+ pm3386_set_carrier(port, 0);
+
+ pm3386_disable_rx(port);
+ caleb_disable_rx(port);
+ }
+}
+
+static int __init enp2611_init_module(void)
+{
+ int i;
+
+ if (!machine_is_enp2611())
+ return -ENODEV;
+
+ caleb_reset();
+ pm3386_reset();
+
+ for (i = 0; i < 3; i++) {
+ nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+ if (nds[i] == NULL) {
+ while (--i >= 0)
+ free_netdev(nds[i]);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(nds[i]);
+ nds[i]->get_stats = enp2611_get_stats;
+ pm3386_init_port(i);
+ pm3386_get_mac(i, nds[i]->dev_addr);
+ }
+
+ ixp2400_msf_init(&enp2611_msf_parameters);
+
+ if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
+ for (i = 0; i < 3; i++)
+ free_netdev(nds[i]);
+ return -EINVAL;
+ }
+
+ init_timer(&link_check_timer);
+ link_check_timer.function = enp2611_check_link_status;
+ link_check_timer.expires = jiffies;
+ add_timer(&link_check_timer);
+
+ return 0;
+}
+
+static void __exit enp2611_cleanup_module(void)
+{
+ int i;
+
+ del_timer_sync(&link_check_timer);
+
+ ixpdev_deinit();
+ for (i = 0; i < 3; i++)
+ free_netdev(nds[i]);
+}
+
+module_init(enp2611_init_module);
+module_exit(enp2611_cleanup_module);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
new file mode 100644
index 00000000000..48a3a891d3a
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -0,0 +1,213 @@
+/*
+ * Generic library functions for the MSF (Media and Switch Fabric) unit
+ * found on the Intel IXP2400 network processor.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/arch/ixp2000-regs.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "ixp2400-msf.h"
+
+/*
+ * This is the Intel recommended PLL init procedure as described on
+ * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
+ */
+static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
+{
+ int rx_dual_clock;
+ int tx_dual_clock;
+ u32 value;
+
+ /*
+ * If the RX mode is not 1x32, we have to enable both RX PLLs
+ * (#0 and #1.) The same thing for the TX direction.
+ */
+ rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
+ tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
+
+ /*
+ * Read initial value.
+ */
+ value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
+
+ /*
+ * Put PLLs in powerdown and bypass mode.
+ */
+ value |= 0x0000f0f0;
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Set single or dual clock mode bits.
+ */
+ value &= ~0x03000000;
+ value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
+
+ /*
+ * Set multipliers.
+ */
+ value &= ~0x00ff0000;
+ value |= mp->rxclk01_multiplier << 16;
+ value |= mp->rxclk23_multiplier << 18;
+ value |= mp->txclk01_multiplier << 20;
+ value |= mp->txclk23_multiplier << 22;
+
+ /*
+ * And write value.
+ */
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Disable PLL bypass mode.
+ */
+ value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Turn on PLLs.
+ */
+ value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Wait for PLLs to lock. There are lock status bits, but IXP2400
+ * erratum #65 says that these lock bits should not be relied upon
+ * as they might not accurately reflect the true state of the PLLs.
+ */
+ udelay(100);
+}
+
+/*
+ * Needed according to p480 of Programmer's Reference Manual.
+ */
+static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
+{
+ int size_bits;
+ int i;
+
+ /*
+ * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
+ * corruption) in the Intel-recommended way: do not add the RBUF
+ * elements susceptible to corruption to the freelist.
+ */
+ size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
+ if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
+ for (i = 1; i < 128; i++) {
+ if (i == 9 || i == 18 || i == 27)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
+ for (i = 1; i < 64; i++) {
+ if (i == 4 || i == 9 || i == 13)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
+ for (i = 1; i < 32; i++) {
+ if (i == 2 || i == 4 || i == 6)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ }
+}
+
+static u32 ixp2400_msf_valid_channels(u32 reg)
+{
+ u32 channels;
+
+ channels = 0;
+ switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
+ case IXP2400_RX_MODE_1x32:
+ channels = 0x1;
+ if (reg & IXP2400_RX_MODE_MPHY &&
+ !(reg & IXP2400_RX_MODE_MPHY_32))
+ channels = 0xf;
+ break;
+
+ case IXP2400_RX_MODE_2x16:
+ channels = 0x5;
+ break;
+
+ case IXP2400_RX_MODE_4x8:
+ channels = 0xf;
+ break;
+
+ case IXP2400_RX_MODE_1x16_2x8:
+ channels = 0xd;
+ break;
+ }
+
+ return channels;
+}
+
+static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+
+ value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
+ value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
+ ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
+}
+
+static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+
+ value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
+ value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
+ ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
+}
+
+
+void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+ int i;
+
+ /*
+ * Init the RX/TX PLLs based on the passed parameter block.
+ */
+ ixp2400_pll_init(mp);
+
+ /*
+ * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF.
+ */
+ value = ixp2000_reg_read(IXP2000_RESET0);
+ ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
+ ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
+
+ /*
+ * Initialise the RX section.
+ */
+ ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
+ ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
+ for (i = 0; i < 4; i++) {
+ ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
+ mp->rx_channel_mode[i]);
+ }
+ ixp2400_msf_free_rbuf_entries(mp);
+ ixp2400_msf_enable_rx(mp);
+
+ /*
+ * Initialise the TX section.
+ */
+ ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
+ ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
+ for (i = 0; i < 4; i++) {
+ ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
+ mp->tx_channel_mode[i]);
+ }
+ ixp2400_msf_enable_tx(mp);
+}
diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ixp2000/ixp2400-msf.h
new file mode 100644
index 00000000000..3ac1af2771d
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400-msf.h
@@ -0,0 +1,115 @@
+/*
+ * Generic library functions for the MSF (Media and Switch Fabric) unit
+ * found on the Intel IXP2400 network processor.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __IXP2400_MSF_H
+#define __IXP2400_MSF_H
+
+struct ixp2400_msf_parameters
+{
+ u32 rx_mode;
+ unsigned rxclk01_multiplier:2;
+ unsigned rxclk23_multiplier:2;
+ unsigned rx_poll_ports:6;
+ u32 rx_channel_mode[4];
+
+ u32 tx_mode;
+ unsigned txclk01_multiplier:2;
+ unsigned txclk23_multiplier:2;
+ unsigned tx_poll_ports:6;
+ u32 tx_channel_mode[4];
+};
+
+void ixp2400_msf_init(struct ixp2400_msf_parameters *mp);
+
+#define IXP2400_PLL_MULTIPLIER_48 0x00
+#define IXP2400_PLL_MULTIPLIER_24 0x01
+#define IXP2400_PLL_MULTIPLIER_16 0x02
+#define IXP2400_PLL_MULTIPLIER_12 0x03
+
+#define IXP2400_RX_MODE_CSIX 0x00400000
+#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000
+#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000
+#define IXP2400_RX_MODE_1x16_2x8 0x00300000
+#define IXP2400_RX_MODE_4x8 0x00200000
+#define IXP2400_RX_MODE_2x16 0x00100000
+#define IXP2400_RX_MODE_1x32 0x00000000
+#define IXP2400_RX_MODE_MPHY 0x00080000
+#define IXP2400_RX_MODE_SPHY 0x00000000
+#define IXP2400_RX_MODE_MPHY_32 0x00040000
+#define IXP2400_RX_MODE_MPHY_4 0x00000000
+#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000
+#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000
+#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000
+#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000
+#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000
+#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000
+#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000
+#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000
+#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200
+#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000
+#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c
+#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008
+#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004
+#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000
+
+#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040
+#define IXP2400_PORT_RX_MODE_MASTER 0x00000000
+#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020
+#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000
+#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010
+#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000
+#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c
+#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008
+#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000
+#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002
+#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000
+#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001
+#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000
+
+#define IXP2400_TX_MODE_CSIX 0x00400000
+#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000
+#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000
+#define IXP2400_TX_MODE_1x16_2x8 0x00300000
+#define IXP2400_TX_MODE_4x8 0x00200000
+#define IXP2400_TX_MODE_2x16 0x00100000
+#define IXP2400_TX_MODE_1x32 0x00000000
+#define IXP2400_TX_MODE_MPHY 0x00080000
+#define IXP2400_TX_MODE_SPHY 0x00000000
+#define IXP2400_TX_MODE_MPHY_32 0x00040000
+#define IXP2400_TX_MODE_MPHY_4 0x00000000
+#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000
+#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000
+#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000
+#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000
+#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000
+#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000
+#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000
+#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000
+#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c
+#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008
+#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004
+#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000
+
+#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040
+#define IXP2400_PORT_TX_MODE_MASTER 0x00000000
+#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010
+#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000
+#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c
+#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008
+#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000
+#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002
+#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001
+#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000
+
+
+#endif
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ixp2000/ixp2400_rx.uc
new file mode 100644
index 00000000000..42a73e357af
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_rx.uc
@@ -0,0 +1,408 @@
+/*
+ * RX ucode for the Intel IXP2400 in POS-PHY mode.
+ * Copyright (C) 2004, 2005 Lennert Buytenhek
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Assumptions made in this code:
+ * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
+ * only one full element list is used. This includes, for example,
+ * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
+ * is not an exhaustive list.)
+ * - The RBUF uses 64-byte mpackets.
+ * - RX descriptors reside in SRAM, and have the following format:
+ * struct rx_desc
+ * {
+ * // to uengine
+ * u32 buf_phys_addr;
+ * u32 buf_length;
+ *
+ * // from uengine
+ * u32 channel;
+ * u32 pkt_length;
+ * };
+ * - Packet data resides in DRAM.
+ * - Packet buffer addresses are 8-byte aligned.
+ * - Scratch ring 0 is rx_pending.
+ * - Scratch ring 1 is rx_done, and has status condition 'full'.
+ * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
+ * - This code is run on all eight threads of the microengine it runs on.
+ *
+ * Local memory is used for per-channel RX state.
+ */
+
+#define RX_THREAD_FREELIST_0 0x0030
+#define RBUF_ELEMENT_DONE 0x0044
+
+#define CHANNEL_FLAGS *l$index0[0]
+#define CHANNEL_FLAG_RECEIVING 1
+#define PACKET_LENGTH *l$index0[1]
+#define PACKET_CHECKSUM *l$index0[2]
+#define BUFFER_HANDLE *l$index0[3]
+#define BUFFER_START *l$index0[4]
+#define BUFFER_LENGTH *l$index0[5]
+
+#define CHANNEL_STATE_SIZE 24 // in bytes
+#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size))
+
+
+ .sig volatile sig1
+ .sig volatile sig2
+ .sig volatile sig3
+
+ .sig mpacket_arrived
+ .reg add_to_rx_freelist
+ .reg read $rsw0, $rsw1
+ .xfer_order $rsw0 $rsw1
+
+ .reg zero
+
+ /*
+ * Initialise add_to_rx_freelist.
+ */
+ .begin
+ .reg temp
+ .reg temp2
+
+ immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
+ immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]
+
+ local_csr_rd[ACTIVE_CTX_STS]
+ immed[temp, 0]
+ alu[temp2, temp, and, 0x1f]
+ alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
+ alu[temp2, temp, and, 0x80]
+ alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
+ .end
+
+ immed[zero, 0]
+
+ /*
+ * Skip context 0 initialisation?
+ */
+ .begin
+ br!=ctx[0, mpacket_receive_loop#]
+ .end
+
+ /*
+ * Initialise local memory.
+ */
+ .begin
+ .reg addr
+ .reg temp
+
+ immed[temp, 0]
+ init_local_mem_loop#:
+ alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
+ local_csr_wr[ACTIVE_LM_ADDR_0, addr]
+ nop
+ nop
+ nop
+
+ immed[CHANNEL_FLAGS, 0]
+
+ alu[temp, temp, +, 1]
+ alu[--, temp, and, 0x20]
+ beq[init_local_mem_loop#]
+ .end
+
+ /*
+ * Initialise signal pipeline.
+ */
+ .begin
+ local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
+ .set_sig sig1
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
+ .set_sig sig2
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
+ .set_sig sig3
+ .end
+
+mpacket_receive_loop#:
+ /*
+ * Synchronise and wait for mpacket.
+ */
+ .begin
+ ctx_arb[sig1]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
+
+ msf[fast_wr, --, add_to_rx_freelist, 0]
+ .set_sig mpacket_arrived
+ ctx_arb[mpacket_arrived]
+ .set $rsw0 $rsw1
+ .end
+
+ /*
+ * We halt if we see {inbparerr,parerr,null,soperror}.
+ */
+ .begin
+ alu_shf[--, 0x1b, and, $rsw0, >>8]
+ bne[abort_rswerr#]
+ .end
+
+ /*
+ * Point local memory pointer to this channel's state area.
+ */
+ .begin
+ .reg chanaddr
+
+ alu[chanaddr, $rsw0, and, 0x1f]
+ alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
+ local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
+ nop
+ nop
+ nop
+ .end
+
+ /*
+ * Check whether we received a SOP mpacket while we were already
+ * working on a packet, or a non-SOP mpacket while there was no
+ * packet pending. (SOP == RECEIVING -> abort) If everything's
+ * okay, update the RECEIVING flag to reflect our new state.
+ */
+ .begin
+ .reg temp
+ .reg eop
+
+ #if CHANNEL_FLAG_RECEIVING != 1
+ #error CHANNEL_FLAG_RECEIVING is not 1
+ #endif
+
+ alu_shf[temp, 1, and, $rsw0, >>15]
+ alu[temp, temp, xor, CHANNEL_FLAGS]
+ alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
+ beq[abort_proterr#]
+
+ alu_shf[eop, 1, and, $rsw0, >>14]
+ alu[CHANNEL_FLAGS, temp, xor, eop]
+ .end
+
+ /*
+ * Copy the mpacket into the right spot, and in case of EOP,
+ * write back the descriptor and pass the packet on.
+ */
+ .begin
+ .reg buffer_offset
+ .reg _packet_length
+ .reg _packet_checksum
+ .reg _buffer_handle
+ .reg _buffer_start
+ .reg _buffer_length
+
+ /*
+ * Determine buffer_offset, _packet_length and
+ * _packet_checksum.
+ */
+ .begin
+ .reg temp
+
+ alu[--, 1, and, $rsw0, >>15]
+ beq[not_sop#]
+
+ immed[PACKET_LENGTH, 0]
+ immed[PACKET_CHECKSUM, 0]
+
+ not_sop#:
+ alu[buffer_offset, --, b, PACKET_LENGTH]
+ alu_shf[temp, 0xff, and, $rsw0, >>16]
+ alu[_packet_length, buffer_offset, +, temp]
+ alu[PACKET_LENGTH, --, b, _packet_length]
+
+ immed[temp, 0xffff]
+ alu[temp, $rsw1, and, temp]
+ alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
+ alu[PACKET_CHECKSUM, --, b, _packet_checksum]
+ .end
+
+ /*
+ * Allocate buffer in case of SOP.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>15]
+ beq[skip_buffer_alloc#]
+
+ .begin
+ .sig zzz
+ .reg read $stemp $stemp2
+ .xfer_order $stemp $stemp2
+
+ rx_nobufs#:
+ scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
+ alu[_buffer_handle, --, b, $stemp]
+ beq[rx_nobufs#]
+
+ sram[read, $stemp, _buffer_handle, 0, 2],
+ ctx_swap[zzz]
+ alu[_buffer_start, --, b, $stemp]
+ alu[_buffer_length, --, b, $stemp2]
+ .end
+
+ skip_buffer_alloc#:
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig2]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
+ .end
+
+ /*
+ * Synchronise buffer state.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>15]
+ beq[copy_from_local_mem#]
+
+ alu[BUFFER_HANDLE, --, b, _buffer_handle]
+ alu[BUFFER_START, --, b, _buffer_start]
+ alu[BUFFER_LENGTH, --, b, _buffer_length]
+ br[sync_state_done#]
+
+ copy_from_local_mem#:
+ alu[_buffer_handle, --, b, BUFFER_HANDLE]
+ alu[_buffer_start, --, b, BUFFER_START]
+ alu[_buffer_length, --, b, BUFFER_LENGTH]
+
+ sync_state_done#:
+ .end
+
+#if 0
+ /*
+ * Debug buffer state management.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>14]
+ beq[no_poison#]
+ immed[BUFFER_HANDLE, 0xdead]
+ immed[BUFFER_START, 0xdead]
+ immed[BUFFER_LENGTH, 0xdead]
+ no_poison#:
+
+ immed[temp, 0xdead]
+ alu[--, _buffer_handle, -, temp]
+ beq[state_corrupted#]
+ alu[--, _buffer_start, -, temp]
+ beq[state_corrupted#]
+ alu[--, _buffer_length, -, temp]
+ beq[state_corrupted#]
+ .end
+#endif
+
+ /*
+ * Check buffer length.
+ */
+ .begin
+ alu[--, _buffer_length, -, _packet_length]
+ blo[buffer_overflow#]
+ .end
+
+ /*
+ * Copy the mpacket and give back the RBUF element.
+ */
+ .begin
+ .reg element
+ .reg xfer_size
+ .reg temp
+ .sig copy_sig
+
+ alu_shf[element, 0x7f, and, $rsw0, >>24]
+ alu_shf[xfer_size, 0xff, and, $rsw0, >>16]
+
+ alu[xfer_size, xfer_size, -, 1]
+ alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
+ alu_shf[temp, 0x10, or, xfer_size, <<21]
+ alu_shf[temp, temp, or, element, <<11]
+ alu_shf[--, temp, or, 1, <<18]
+
+ dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
+ indirect_ref, sig_done[copy_sig]
+ ctx_arb[copy_sig]
+
+ alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
+ msf[fast_wr, --, temp, 0]
+ .end
+
+ /*
+ * If EOP, write back the packet descriptor.
+ */
+ .begin
+ .reg write $stemp $stemp2
+ .xfer_order $stemp $stemp2
+ .sig zzz
+
+ alu_shf[--, 1, and, $rsw0, >>14]
+ beq[no_writeback#]
+
+ alu[$stemp, $rsw0, and, 0x1f]
+ alu[$stemp2, --, b, _packet_length]
+ sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]
+
+ no_writeback#:
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig3]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
+ .end
+
+ /*
+ * If EOP, put the buffer back onto the scratch ring.
+ */
+ .begin
+ .reg write $stemp
+ .sig zzz
+
+ br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]
+
+ alu_shf[--, 1, and, $rsw0, >>14]
+ beq[mpacket_receive_loop#]
+
+ alu[--, 1, and, $rsw0, >>10]
+ bne[rxerr#]
+
+ alu[$stemp, --, b, _buffer_handle]
+ scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
+ cap[fast_wr, 0, XSCALE_INT_A]
+ br[mpacket_receive_loop#]
+
+ rxerr#:
+ alu[$stemp, --, b, _buffer_handle]
+ scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
+ br[mpacket_receive_loop#]
+ .end
+ .end
+
+
+abort_rswerr#:
+ halt
+
+abort_proterr#:
+ halt
+
+state_corrupted#:
+ halt
+
+buffer_overflow#:
+ halt
+
+rx_done_ring_overflow#:
+ halt
+
+
diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ixp2000/ixp2400_rx.ucode
new file mode 100644
index 00000000000..e8aee2f81aa
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_rx.ucode
@@ -0,0 +1,130 @@
+static struct ixp2000_uengine_code ixp2400_rx =
+{
+ .cpu_model_bitmask = 0x000003fe,
+ .cpu_min_revision = 0,
+ .cpu_max_revision = 255,
+
+ .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS |
+ IXP2000_UENGINE_PRN_UPDATE_EVERY |
+ IXP2000_UENGINE_NN_FROM_PREVIOUS |
+ IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
+ IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
+ IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
+
+ .initial_reg_values = (struct ixp2000_reg_value []) {
+ { -1, -1 }
+ },
+
+ .num_insns = 109,
+ .insns = (u8 []) {
+ 0xf0, 0x00, 0x0c, 0xc0, 0x05,
+ 0xf4, 0x44, 0x0c, 0x00, 0x05,
+ 0xfc, 0x04, 0x4c, 0x00, 0x00,
+ 0xf0, 0x00, 0x00, 0x3b, 0x00,
+ 0xb4, 0x40, 0xf0, 0x3b, 0x1f,
+ 0x8a, 0xc0, 0x50, 0x3e, 0x05,
+ 0xb4, 0x40, 0xf0, 0x3b, 0x80,
+ 0x9a, 0xe0, 0x00, 0x3e, 0x05,
+ 0xf0, 0x00, 0x00, 0x07, 0x00,
+ 0xd8, 0x05, 0xc0, 0x00, 0x11,
+ 0xf0, 0x00, 0x00, 0x0f, 0x00,
+ 0x91, 0xb0, 0x20, 0x0e, 0x00,
+ 0xfc, 0x06, 0x60, 0x0b, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x02, 0x00,
+ 0xb0, 0xc0, 0x30, 0x0f, 0x01,
+ 0xa4, 0x70, 0x00, 0x0f, 0x20,
+ 0xd8, 0x02, 0xc0, 0x01, 0x00,
+ 0xfc, 0x10, 0xac, 0x23, 0x08,
+ 0xfc, 0x10, 0xac, 0x43, 0x10,
+ 0xfc, 0x10, 0xac, 0x63, 0x18,
+ 0xe0, 0x00, 0x00, 0x00, 0x02,
+ 0xfc, 0x10, 0xae, 0x23, 0x88,
+ 0x3d, 0x00, 0x04, 0x03, 0x20,
+ 0xe0, 0x00, 0x00, 0x00, 0x10,
+ 0x84, 0x82, 0x02, 0x01, 0x3b,
+ 0xd8, 0x1a, 0x00, 0x01, 0x01,
+ 0xb4, 0x00, 0x8c, 0x7d, 0x80,
+ 0x91, 0xb0, 0x80, 0x22, 0x00,
+ 0xfc, 0x06, 0x60, 0x23, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0x94, 0xf0, 0x92, 0x01, 0x21,
+ 0xac, 0x40, 0x60, 0x26, 0x00,
+ 0xa4, 0x30, 0x0c, 0x04, 0x06,
+ 0xd8, 0x1a, 0x40, 0x01, 0x00,
+ 0x94, 0xe0, 0xa2, 0x01, 0x21,
+ 0xac, 0x20, 0x00, 0x28, 0x06,
+ 0x84, 0xf2, 0x02, 0x01, 0x21,
+ 0xd8, 0x0b, 0x40, 0x01, 0x00,
+ 0xf0, 0x00, 0x0c, 0x02, 0x01,
+ 0xf0, 0x00, 0x0c, 0x02, 0x02,
+ 0xa0, 0x00, 0x08, 0x04, 0x00,
+ 0x95, 0x00, 0xc6, 0x01, 0xff,
+ 0xa0, 0x80, 0x10, 0x30, 0x00,
+ 0xa0, 0x60, 0x1c, 0x00, 0x01,
+ 0xf0, 0x0f, 0xf0, 0x33, 0xff,
+ 0xb4, 0x00, 0xc0, 0x31, 0x81,
+ 0xb0, 0x80, 0xb0, 0x32, 0x02,
+ 0xa0, 0x20, 0x20, 0x2c, 0x00,
+ 0x94, 0xf0, 0xd2, 0x01, 0x21,
+ 0xd8, 0x0f, 0x40, 0x01, 0x00,
+ 0x19, 0x40, 0x10, 0x04, 0x20,
+ 0xa0, 0x00, 0x26, 0x04, 0x00,
+ 0xd8, 0x0d, 0xc0, 0x01, 0x00,
+ 0x00, 0x42, 0x10, 0x80, 0x02,
+ 0xb0, 0x00, 0x46, 0x04, 0x00,
+ 0xb0, 0x00, 0x56, 0x08, 0x00,
+ 0xe0, 0x00, 0x00, 0x00, 0x04,
+ 0xfc, 0x10, 0xae, 0x43, 0x90,
+ 0x84, 0xf0, 0x32, 0x01, 0x21,
+ 0xd8, 0x11, 0x40, 0x01, 0x00,
+ 0xa0, 0x60, 0x3c, 0x00, 0x02,
+ 0xa0, 0x20, 0x40, 0x10, 0x00,
+ 0xa0, 0x20, 0x50, 0x14, 0x00,
+ 0xd8, 0x12, 0x00, 0x00, 0x18,
+ 0xa0, 0x00, 0x28, 0x0c, 0x00,
+ 0xb0, 0x00, 0x48, 0x10, 0x00,
+ 0xb0, 0x00, 0x58, 0x14, 0x00,
+ 0xaa, 0xf0, 0x00, 0x14, 0x01,
+ 0xd8, 0x1a, 0xc0, 0x01, 0x05,
+ 0x85, 0x80, 0x42, 0x01, 0xff,
+ 0x95, 0x00, 0x66, 0x01, 0xff,
+ 0xba, 0xc0, 0x60, 0x1b, 0x01,
+ 0x9a, 0x30, 0x60, 0x19, 0x30,
+ 0x9a, 0xb0, 0x70, 0x1a, 0x30,
+ 0x9b, 0x50, 0x78, 0x1e, 0x04,
+ 0x8a, 0xe2, 0x08, 0x1e, 0x21,
+ 0x6a, 0x4e, 0x00, 0x13, 0x00,
+ 0xe0, 0x00, 0x00, 0x00, 0x30,
+ 0x9b, 0x00, 0x7a, 0x92, 0x04,
+ 0x3d, 0x00, 0x04, 0x1f, 0x20,
+ 0x84, 0xe2, 0x02, 0x01, 0x21,
+ 0xd8, 0x16, 0x80, 0x01, 0x00,
+ 0xa4, 0x18, 0x0c, 0x7d, 0x80,
+ 0xa0, 0x58, 0x1c, 0x00, 0x01,
+ 0x01, 0x42, 0x00, 0xa0, 0x02,
+ 0xe0, 0x00, 0x00, 0x00, 0x08,
+ 0xfc, 0x10, 0xae, 0x63, 0x98,
+ 0xd8, 0x1b, 0x00, 0xc2, 0x14,
+ 0x84, 0xe2, 0x02, 0x01, 0x21,
+ 0xd8, 0x05, 0xc0, 0x01, 0x00,
+ 0x84, 0xa2, 0x02, 0x01, 0x21,
+ 0xd8, 0x19, 0x40, 0x01, 0x01,
+ 0xa0, 0x58, 0x0c, 0x00, 0x02,
+ 0x1a, 0x40, 0x00, 0x04, 0x24,
+ 0x33, 0x00, 0x01, 0x2f, 0x20,
+ 0xd8, 0x05, 0xc0, 0x00, 0x18,
+ 0xa0, 0x58, 0x0c, 0x00, 0x02,
+ 0x1a, 0x40, 0x00, 0x04, 0x20,
+ 0xd8, 0x05, 0xc0, 0x00, 0x18,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ }
+};
diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ixp2000/ixp2400_tx.uc
new file mode 100644
index 00000000000..d090d1884fb
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_tx.uc
@@ -0,0 +1,272 @@
+/*
+ * TX ucode for the Intel IXP2400 in POS-PHY mode.
+ * Copyright (C) 2004, 2005 Lennert Buytenhek
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Assumptions made in this code:
+ * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
+ * only one TBUF partition is used. This includes, for example,
+ * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
+ * is not an exhaustive list.)
+ * - The TBUF uses 64-byte mpackets.
+ * - TX descriptors reside in SRAM, and have the following format:
+ * struct tx_desc
+ * {
+ * // to uengine
+ * u32 buf_phys_addr;
+ * u32 pkt_length;
+ * u32 channel;
+ * };
+ * - Packet data resides in DRAM.
+ * - Packet buffer addresses are 8-byte aligned.
+ * - Scratch ring 2 is tx_pending.
+ * - Scratch ring 3 is tx_done, and has status condition 'full'.
+ * - This code is run on all eight threads of the microengine it runs on.
+ */
+
+#define TX_SEQUENCE_0 0x0060
+#define TBUF_CTRL 0x1800
+
+#define PARTITION_SIZE 128
+#define PARTITION_THRESH 96
+
+
+ .sig volatile sig1
+ .sig volatile sig2
+ .sig volatile sig3
+
+ .reg @old_tx_seq_0
+ .reg @mpkts_in_flight
+ .reg @next_tbuf_mpacket
+
+ .reg @buffer_handle
+ .reg @buffer_start
+ .reg @packet_length
+ .reg @channel
+ .reg @packet_offset
+
+ .reg zero
+
+ immed[zero, 0]
+
+ /*
+ * Skip context 0 initialisation?
+ */
+ .begin
+ br!=ctx[0, mpacket_tx_loop#]
+ .end
+
+ /*
+ * Wait until all pending TBUF elements have been transmitted.
+ */
+ .begin
+ .reg read $tx
+ .sig zzz
+
+ loop_empty#:
+ msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
+ alu_shf[--, --, b, $tx, >>31]
+ beq[loop_empty#]
+
+ alu[@old_tx_seq_0, --, b, $tx]
+ .end
+
+ immed[@mpkts_in_flight, 0]
+ alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
+
+ immed[@buffer_handle, 0]
+
+ /*
+ * Initialise signal pipeline.
+ */
+ .begin
+ local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
+ .set_sig sig1
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
+ .set_sig sig2
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
+ .set_sig sig3
+ .end
+
+mpacket_tx_loop#:
+ .begin
+ .reg tbuf_element_index
+ .reg buffer_handle
+ .reg sop_eop
+ .reg packet_data
+ .reg channel
+ .reg mpacket_size
+
+ /*
+ * If there is no packet currently being transmitted,
+ * dequeue the next TX descriptor, and fetch the buffer
+ * address, packet length and destination channel number.
+ */
+ .begin
+ .reg read $stemp $stemp2 $stemp3
+ .xfer_order $stemp $stemp2 $stemp3
+ .sig zzz
+
+ ctx_arb[sig1]
+
+ alu[--, --, b, @buffer_handle]
+ bne[already_got_packet#]
+
+ tx_nobufs#:
+ scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
+ alu[@buffer_handle, --, b, $stemp]
+ beq[tx_nobufs#]
+
+ sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
+ alu[@buffer_start, --, b, $stemp]
+ alu[@packet_length, --, b, $stemp2]
+ beq[zero_byte_packet#]
+ alu[@channel, --, b, $stemp3]
+ immed[@packet_offset, 0]
+
+ already_got_packet#:
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
+ .end
+
+ /*
+ * Determine tbuf element index, SOP/EOP flags, mpacket
+ * offset and mpacket size and cache buffer_handle and
+ * channel number.
+ */
+ .begin
+ alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
+ alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
+ alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
+ (PARTITION_SIZE - 1)]
+
+ alu[buffer_handle, --, b, @buffer_handle]
+ immed[@buffer_handle, 0]
+
+ immed[sop_eop, 1]
+
+ alu[packet_data, --, b, @packet_offset]
+ bne[no_sop#]
+ alu[sop_eop, sop_eop, or, 2]
+ no_sop#:
+ alu[packet_data, packet_data, +, @buffer_start]
+
+ alu[channel, --, b, @channel]
+
+ alu[mpacket_size, @packet_length, -, @packet_offset]
+ alu[--, 64, -, mpacket_size]
+ bhs[eop#]
+ alu[@buffer_handle, --, b, buffer_handle]
+ immed[mpacket_size, 64]
+ alu[sop_eop, sop_eop, and, 2]
+ eop#:
+
+ alu[@packet_offset, @packet_offset, +, mpacket_size]
+ .end
+
+ /*
+ * Wait until there's enough space in the TBUF.
+ */
+ .begin
+ .reg read $tx
+ .reg temp
+ .sig zzz
+
+ ctx_arb[sig2]
+
+ br[test_space#]
+
+ loop_space#:
+ msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
+
+ alu[temp, $tx, -, @old_tx_seq_0]
+ alu[temp, temp, and, 0xff]
+ alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
+
+ alu[@old_tx_seq_0, --, b, $tx]
+
+ test_space#:
+ alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
+ blo[loop_space#]
+
+ alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
+
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
+ .end
+
+ /*
+ * Copy the packet data to the TBUF.
+ */
+ .begin
+ .reg temp
+ .sig copy_sig
+
+ alu[temp, mpacket_size, -, 1]
+ alu_shf[temp, 0x10, or, temp, >>3]
+ alu_shf[temp, 0x10, or, temp, <<21]
+ alu_shf[temp, temp, or, tbuf_element_index, <<11]
+ alu_shf[--, temp, or, 1, <<18]
+
+ dram[tbuf_wr, --, packet_data, 0, max_8],
+ indirect_ref, sig_done[copy_sig]
+ ctx_arb[copy_sig]
+ .end
+
+ /*
+ * Mark TBUF element as ready-to-be-transmitted.
+ */
+ .begin
+ .reg write $tsw $tsw2
+ .xfer_order $tsw $tsw2
+ .reg temp
+ .sig zzz
+
+ alu_shf[temp, channel, or, mpacket_size, <<24]
+ alu_shf[$tsw, temp, or, sop_eop, <<8]
+ immed[$tsw2, 0]
+
+ immed[temp, TBUF_CTRL]
+ alu_shf[temp, temp, or, tbuf_element_index, <<3]
+ msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig3]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
+ .end
+
+ /*
+ * If this was an EOP mpacket, recycle the TX buffer
+ * and signal the host.
+ */
+ .begin
+ .reg write $stemp
+ .sig zzz
+
+ alu[--, sop_eop, and, 1]
+ beq[mpacket_tx_loop#]
+
+ tx_done_ring_full#:
+ br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
+
+ alu[$stemp, --, b, buffer_handle]
+ scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
+ cap[fast_wr, 0, XSCALE_INT_A]
+ br[mpacket_tx_loop#]
+ .end
+ .end
+
+
+zero_byte_packet#:
+ halt
+
+
diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ixp2000/ixp2400_tx.ucode
new file mode 100644
index 00000000000..a433e24b0a5
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_tx.ucode
@@ -0,0 +1,98 @@
+static struct ixp2000_uengine_code ixp2400_tx =
+{
+ .cpu_model_bitmask = 0x000003fe,
+ .cpu_min_revision = 0,
+ .cpu_max_revision = 255,
+
+ .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS |
+ IXP2000_UENGINE_PRN_UPDATE_EVERY |
+ IXP2000_UENGINE_NN_FROM_PREVIOUS |
+ IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
+ IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
+ IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
+
+ .initial_reg_values = (struct ixp2000_reg_value []) {
+ { -1, -1 }
+ },
+
+ .num_insns = 77,
+ .insns = (u8 []) {
+ 0xf0, 0x00, 0x00, 0x07, 0x00,
+ 0xd8, 0x03, 0x00, 0x00, 0x11,
+ 0x3c, 0x40, 0x00, 0x04, 0xe0,
+ 0x81, 0xf2, 0x02, 0x01, 0x00,
+ 0xd8, 0x00, 0x80, 0x01, 0x00,
+ 0xb0, 0x08, 0x06, 0x00, 0x00,
+ 0xf0, 0x00, 0x0c, 0x00, 0x80,
+ 0xb4, 0x49, 0x02, 0x03, 0x7f,
+ 0xf0, 0x00, 0x02, 0x83, 0x00,
+ 0xfc, 0x10, 0xac, 0x23, 0x08,
+ 0xfc, 0x10, 0xac, 0x43, 0x10,
+ 0xfc, 0x10, 0xac, 0x63, 0x18,
+ 0xe0, 0x00, 0x00, 0x00, 0x02,
+ 0xa0, 0x30, 0x02, 0x80, 0x00,
+ 0xd8, 0x06, 0x00, 0x01, 0x01,
+ 0x19, 0x40, 0x00, 0x04, 0x28,
+ 0xb0, 0x0a, 0x06, 0x00, 0x00,
+ 0xd8, 0x03, 0xc0, 0x01, 0x00,
+ 0x00, 0x44, 0x00, 0x80, 0x80,
+ 0xa0, 0x09, 0x06, 0x00, 0x00,
+ 0xb0, 0x0b, 0x06, 0x04, 0x00,
+ 0xd8, 0x13, 0x00, 0x01, 0x00,
+ 0xb0, 0x0c, 0x06, 0x08, 0x00,
+ 0xf0, 0x00, 0x0c, 0x00, 0xa0,
+ 0xfc, 0x10, 0xae, 0x23, 0x88,
+ 0xa0, 0x00, 0x12, 0x40, 0x00,
+ 0xb0, 0xc9, 0x02, 0x43, 0x01,
+ 0xb4, 0x49, 0x02, 0x43, 0x7f,
+ 0xb0, 0x00, 0x22, 0x80, 0x00,
+ 0xf0, 0x00, 0x02, 0x83, 0x00,
+ 0xf0, 0x00, 0x0c, 0x04, 0x02,
+ 0xb0, 0x40, 0x6c, 0x00, 0xa0,
+ 0xd8, 0x08, 0x80, 0x01, 0x01,
+ 0xaa, 0x00, 0x2c, 0x08, 0x02,
+ 0xa0, 0xc0, 0x30, 0x18, 0x90,
+ 0xa0, 0x00, 0x43, 0x00, 0x00,
+ 0xba, 0xc0, 0x32, 0xc0, 0xa0,
+ 0xaa, 0xb0, 0x00, 0x0f, 0x40,
+ 0xd8, 0x0a, 0x80, 0x01, 0x04,
+ 0xb0, 0x0a, 0x00, 0x08, 0x00,
+ 0xf0, 0x00, 0x00, 0x0f, 0x40,
+ 0xa4, 0x00, 0x2c, 0x08, 0x02,
+ 0xa0, 0x8a, 0x00, 0x0c, 0xa0,
+ 0xe0, 0x00, 0x00, 0x00, 0x04,
+ 0xd8, 0x0c, 0x80, 0x00, 0x18,
+ 0x3c, 0x40, 0x00, 0x04, 0xe0,
+ 0xba, 0x80, 0x42, 0x01, 0x80,
+ 0xb4, 0x40, 0x40, 0x13, 0xff,
+ 0xaa, 0x88, 0x00, 0x10, 0x80,
+ 0xb0, 0x08, 0x06, 0x00, 0x00,
+ 0xaa, 0xf0, 0x0d, 0x80, 0x80,
+ 0xd8, 0x0b, 0x40, 0x01, 0x05,
+ 0xa0, 0x88, 0x0c, 0x04, 0x80,
+ 0xfc, 0x10, 0xae, 0x43, 0x90,
+ 0xba, 0xc0, 0x50, 0x0f, 0x01,
+ 0x9a, 0x30, 0x50, 0x15, 0x30,
+ 0x9a, 0xb0, 0x50, 0x16, 0x30,
+ 0x9b, 0x50, 0x58, 0x16, 0x01,
+ 0x8a, 0xe2, 0x08, 0x16, 0x21,
+ 0x6b, 0x4e, 0x00, 0x83, 0x03,
+ 0xe0, 0x00, 0x00, 0x00, 0x30,
+ 0x9a, 0x80, 0x70, 0x0e, 0x04,
+ 0x8b, 0x88, 0x08, 0x1e, 0x02,
+ 0xf0, 0x00, 0x0c, 0x01, 0x81,
+ 0xf0, 0x01, 0x80, 0x1f, 0x00,
+ 0x9b, 0xd0, 0x78, 0x1e, 0x01,
+ 0x3d, 0x42, 0x00, 0x1c, 0x20,
+ 0xe0, 0x00, 0x00, 0x00, 0x08,
+ 0xfc, 0x10, 0xae, 0x63, 0x98,
+ 0xa4, 0x30, 0x0c, 0x04, 0x02,
+ 0xd8, 0x03, 0x00, 0x01, 0x00,
+ 0xd8, 0x11, 0xc1, 0x42, 0x14,
+ 0xa0, 0x18, 0x00, 0x08, 0x00,
+ 0x1a, 0x40, 0x00, 0x04, 0x2c,
+ 0x33, 0x00, 0x01, 0x2f, 0x20,
+ 0xd8, 0x03, 0x00, 0x00, 0x18,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ }
+};
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
new file mode 100644
index 00000000000..09f03f493be
--- /dev/null
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -0,0 +1,421 @@
+/*
+ * IXP2000 MSF network device driver
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <asm/arch/uengine.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include "ixp2400_rx.ucode"
+#include "ixp2400_tx.ucode"
+#include "ixpdev_priv.h"
+#include "ixpdev.h"
+
+#define DRV_MODULE_VERSION "0.2"
+
+static int nds_count;
+static struct net_device **nds;
+static int nds_open;
+static void (*set_port_admin_status)(int port, int up);
+
+static struct ixpdev_rx_desc * const rx_desc =
+ (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE);
+static struct ixpdev_tx_desc * const tx_desc =
+ (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE);
+static int tx_pointer;
+
+
+static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+ struct ixpdev_tx_desc *desc;
+ int entry;
+
+ if (unlikely(skb->len > PAGE_SIZE)) {
+ /* @@@ Count drops. */
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ entry = tx_pointer;
+ tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT;
+
+ desc = tx_desc + entry;
+ desc->pkt_length = skb->len;
+ desc->channel = ip->channel;
+
+ skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr));
+ dev_kfree_skb(skb);
+
+ ixp2000_reg_write(RING_TX_PENDING,
+ TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc)));
+
+ dev->trans_start = jiffies;
+
+ local_irq_disable();
+ ip->tx_queue_entries++;
+ if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
+ netif_stop_queue(dev);
+ local_irq_enable();
+
+ return 0;
+}
+
+
+static int ixpdev_rx(struct net_device *dev, int *budget)
+{
+ while (*budget > 0) {
+ struct ixpdev_rx_desc *desc;
+ struct sk_buff *skb;
+ void *buf;
+ u32 _desc;
+
+ _desc = ixp2000_reg_read(RING_RX_DONE);
+ if (_desc == 0)
+ return 0;
+
+ desc = rx_desc +
+ ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc));
+ buf = phys_to_virt(desc->buf_addr);
+
+ if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) {
+ printk(KERN_ERR "ixp2000: rx err, length %d\n",
+ desc->pkt_length);
+ goto err;
+ }
+
+ if (desc->channel < 0 || desc->channel >= nds_count) {
+ printk(KERN_ERR "ixp2000: rx err, channel %d\n",
+ desc->channel);
+ goto err;
+ }
+
+ /* @@@ Make FCS stripping configurable. */
+ desc->pkt_length -= 4;
+
+ if (unlikely(!netif_running(nds[desc->channel])))
+ goto err;
+
+ skb = dev_alloc_skb(desc->pkt_length + 2);
+ if (likely(skb != NULL)) {
+ skb->dev = nds[desc->channel];
+ skb_reserve(skb, 2);
+ eth_copy_and_sum(skb, buf, desc->pkt_length, 0);
+ skb_put(skb, desc->pkt_length);
+ skb->protocol = eth_type_trans(skb, skb->dev);
+
+ skb->dev->last_rx = jiffies;
+
+ netif_receive_skb(skb);
+ }
+
+err:
+ ixp2000_reg_write(RING_RX_PENDING, _desc);
+ dev->quota--;
+ (*budget)--;
+ }
+
+ return 1;
+}
+
+/* dev always points to nds[0]. */
+static int ixpdev_poll(struct net_device *dev, int *budget)
+{
+ /* @@@ Have to stop polling when nds[0] is administratively
+ * downed while we are polling. */
+ do {
+ ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff);
+
+ if (ixpdev_rx(dev, budget))
+ return 1;
+ } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff);
+
+ netif_rx_complete(dev);
+ ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff);
+
+ return 0;
+}
+
+static void ixpdev_tx_complete(void)
+{
+ int channel;
+ u32 wake;
+
+ wake = 0;
+ while (1) {
+ struct ixpdev_priv *ip;
+ u32 desc;
+ int entry;
+
+ desc = ixp2000_reg_read(RING_TX_DONE);
+ if (desc == 0)
+ break;
+
+ /* @@@ Check whether entries come back in order. */
+ entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc);
+ channel = tx_desc[entry].channel;
+
+ if (channel < 0 || channel >= nds_count) {
+ printk(KERN_ERR "ixp2000: txcomp channel index "
+ "out of bounds (%d, %.8i, %d)\n",
+ channel, (unsigned int)desc, entry);
+ continue;
+ }
+
+ ip = netdev_priv(nds[channel]);
+ if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
+ wake |= 1 << channel;
+ ip->tx_queue_entries--;
+ }
+
+ for (channel = 0; wake != 0; channel++) {
+ if (wake & (1 << channel)) {
+ netif_wake_queue(nds[channel]);
+ wake &= ~(1 << channel);
+ }
+ }
+}
+
+static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 status;
+
+ status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0);
+ if (status == 0)
+ return IRQ_NONE;
+
+ /*
+ * Any of the eight receive units signaled RX?
+ */
+ if (status & 0x00ff) {
+ ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff);
+ if (likely(__netif_rx_schedule_prep(nds[0]))) {
+ __netif_rx_schedule(nds[0]);
+ } else {
+ printk(KERN_CRIT "ixp2000: irq while polling!!\n");
+ }
+ }
+
+ /*
+ * Any of the eight transmit units signaled TXdone?
+ */
+ if (status & 0xff00) {
+ ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00);
+ ixpdev_tx_complete();
+ }
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void ixpdev_poll_controller(struct net_device *dev)
+{
+ disable_irq(IRQ_IXP2000_THDA0);
+ ixpdev_interrupt(IRQ_IXP2000_THDA0, dev, NULL);
+ enable_irq(IRQ_IXP2000_THDA0);
+}
+#endif
+
+static int ixpdev_open(struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+ int err;
+
+ if (!nds_open++) {
+ err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt,
+ SA_SHIRQ, "ixp2000_eth", nds);
+ if (err) {
+ nds_open--;
+ return err;
+ }
+
+ ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff);
+ }
+
+ set_port_admin_status(ip->channel, 1);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int ixpdev_close(struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ set_port_admin_status(ip->channel, 0);
+
+ if (!--nds_open) {
+ ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff);
+ free_irq(IRQ_IXP2000_THDA0, nds);
+ }
+
+ return 0;
+}
+
+struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
+{
+ struct net_device *dev;
+ struct ixpdev_priv *ip;
+
+ dev = alloc_etherdev(sizeof_priv);
+ if (dev == NULL)
+ return NULL;
+
+ dev->hard_start_xmit = ixpdev_xmit;
+ dev->poll = ixpdev_poll;
+ dev->open = ixpdev_open;
+ dev->stop = ixpdev_close;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ixpdev_poll_controller;
+#endif
+
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->weight = 64;
+
+ ip = netdev_priv(dev);
+ ip->channel = channel;
+ ip->tx_queue_entries = 0;
+
+ return dev;
+}
+
+int ixpdev_init(int __nds_count, struct net_device **__nds,
+ void (*__set_port_admin_status)(int port, int up))
+{
+ int i;
+ int err;
+
+ if (RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192) {
+ static void __too_many_rx_or_tx_buffers(void);
+ __too_many_rx_or_tx_buffers();
+ }
+
+ printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION);
+
+ nds_count = __nds_count;
+ nds = __nds;
+ set_port_admin_status = __set_port_admin_status;
+
+ for (i = 0; i < RX_BUF_COUNT; i++) {
+ void *buf;
+
+ buf = (void *)get_zeroed_page(GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ while (--i >= 0)
+ free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
+ goto err_out;
+ }
+ rx_desc[i].buf_addr = virt_to_phys(buf);
+ rx_desc[i].buf_length = PAGE_SIZE;
+ }
+
+ /* @@@ Maybe we shouldn't be preallocating TX buffers. */
+ for (i = 0; i < TX_BUF_COUNT; i++) {
+ void *buf;
+
+ buf = (void *)get_zeroed_page(GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ while (--i >= 0)
+ free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
+ goto err_free_rx;
+ }
+ tx_desc[i].buf_addr = virt_to_phys(buf);
+ }
+
+ /* 256 entries, ring status set means 'empty', base address 0x0000. */
+ ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000);
+ ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000);
+
+ /* 256 entries, ring status set means 'full', base address 0x0400. */
+ ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400);
+ ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000);
+
+ for (i = 0; i < RX_BUF_COUNT; i++) {
+ ixp2000_reg_write(RING_RX_PENDING,
+ RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc)));
+ }
+
+ ixp2000_uengine_load(0, &ixp2400_rx);
+ ixp2000_uengine_start_contexts(0, 0xff);
+
+ /* 256 entries, ring status set means 'empty', base address 0x0800. */
+ ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800);
+ ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000);
+
+ /* 256 entries, ring status set means 'full', base address 0x0c00. */
+ ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00);
+ ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000);
+
+ ixp2000_uengine_load(1, &ixp2400_tx);
+ ixp2000_uengine_start_contexts(1, 0xff);
+
+ for (i = 0; i < nds_count; i++) {
+ err = register_netdev(nds[i]);
+ if (err) {
+ while (--i >= 0)
+ unregister_netdev(nds[i]);
+ goto err_free_tx;
+ }
+ }
+
+ for (i = 0; i < nds_count; i++) {
+ printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), "
+ "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", nds[i]->name, i,
+ nds[i]->dev_addr[0], nds[i]->dev_addr[1],
+ nds[i]->dev_addr[2], nds[i]->dev_addr[3],
+ nds[i]->dev_addr[4], nds[i]->dev_addr[5]);
+ }
+
+ return 0;
+
+err_free_tx:
+ for (i = 0; i < TX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
+
+err_free_rx:
+ for (i = 0; i < RX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
+
+err_out:
+ return err;
+}
+
+void ixpdev_deinit(void)
+{
+ int i;
+
+ /* @@@ Flush out pending packets. */
+
+ for (i = 0; i < nds_count; i++)
+ unregister_netdev(nds[i]);
+
+ ixp2000_uengine_stop_contexts(1, 0xff);
+ ixp2000_uengine_stop_contexts(0, 0xff);
+ ixp2000_uengine_reset(0x3);
+
+ for (i = 0; i < TX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
+
+ for (i = 0; i < RX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
+}
diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ixp2000/ixpdev.h
new file mode 100644
index 00000000000..bd686cb6305
--- /dev/null
+++ b/drivers/net/ixp2000/ixpdev.h
@@ -0,0 +1,27 @@
+/*
+ * IXP2000 MSF network device driver
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __IXPDEV_H
+#define __IXPDEV_H
+
+struct ixpdev_priv
+{
+ int channel;
+ int tx_queue_entries;
+};
+
+struct net_device *ixpdev_alloc(int channel, int sizeof_priv);
+int ixpdev_init(int num_ports, struct net_device **nds,
+ void (*set_port_admin_status)(int port, int up));
+void ixpdev_deinit(void);
+
+
+#endif
diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ixp2000/ixpdev_priv.h
new file mode 100644
index 00000000000..86aa08ea0c3
--- /dev/null
+++ b/drivers/net/ixp2000/ixpdev_priv.h
@@ -0,0 +1,57 @@
+/*
+ * IXP2000 MSF network device driver
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __IXPDEV_PRIV_H
+#define __IXPDEV_PRIV_H
+
+#define RX_BUF_DESC_BASE 0x00001000
+#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc)))
+#define TX_BUF_DESC_BASE 0x00002000
+#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc)))
+#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4)
+
+#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE)
+#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4))
+#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8))
+#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12))
+
+#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x)))
+#define RING_RX_PENDING_BASE SCRATCH_REG(0x00)
+#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04)
+#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08)
+#define RING_RX_DONE_BASE SCRATCH_REG(0x10)
+#define RING_RX_DONE_HEAD SCRATCH_REG(0x14)
+#define RING_RX_DONE_TAIL SCRATCH_REG(0x18)
+#define RING_TX_PENDING_BASE SCRATCH_REG(0x20)
+#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24)
+#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28)
+#define RING_TX_DONE_BASE SCRATCH_REG(0x30)
+#define RING_TX_DONE_HEAD SCRATCH_REG(0x34)
+#define RING_TX_DONE_TAIL SCRATCH_REG(0x38)
+
+struct ixpdev_rx_desc
+{
+ u32 buf_addr;
+ u32 buf_length;
+ u32 channel;
+ u32 pkt_length;
+};
+
+struct ixpdev_tx_desc
+{
+ u32 buf_addr;
+ u32 pkt_length;
+ u32 channel;
+ u32 unused;
+};
+
+
+#endif
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
new file mode 100644
index 00000000000..5c7ab756405
--- /dev/null
+++ b/drivers/net/ixp2000/pm3386.c
@@ -0,0 +1,334 @@
+/*
+ * Helper functions for the PM3386s on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <asm/io.h>
+#include "pm3386.h"
+
+/*
+ * Read from register 'reg' of PM3386 device 'pm'.
+ */
+static u16 pm3386_reg_read(int pm, int reg)
+{
+ void *_reg;
+ u16 value;
+
+ _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
+ if (pm == 1)
+ _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
+
+ value = *((volatile u16 *)(_reg + (reg << 1)));
+
+// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
+
+ return value;
+}
+
+/*
+ * Write to register 'reg' of PM3386 device 'pm', and perform
+ * a readback from the identification register.
+ */
+static void pm3386_reg_write(int pm, int reg, u16 value)
+{
+ void *_reg;
+ u16 dummy;
+
+// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
+
+ _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
+ if (pm == 1)
+ _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
+
+ *((volatile u16 *)(_reg + (reg << 1))) = value;
+
+ dummy = *((volatile u16 *)_reg);
+ __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Read from port 'port' register 'reg', where the registers
+ * for the different ports are 'spacing' registers apart.
+ */
+static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
+{
+ int reg;
+
+ reg = _reg;
+ if (port & 1)
+ reg += spacing;
+
+ return pm3386_reg_read(port >> 1, reg);
+}
+
+/*
+ * Write to port 'port' register 'reg', where the registers
+ * for the different ports are 'spacing' registers apart.
+ */
+static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
+{
+ int reg;
+
+ reg = _reg;
+ if (port & 1)
+ reg += spacing;
+
+ pm3386_reg_write(port >> 1, reg, value);
+}
+
+
+void pm3386_reset(void)
+{
+ u8 mac[3][6];
+
+ /* Save programmed MAC addresses. */
+ pm3386_get_mac(0, mac[0]);
+ pm3386_get_mac(1, mac[1]);
+ pm3386_get_mac(2, mac[2]);
+
+ /* Assert analog and digital reset. */
+ pm3386_reg_write(0, 0x002, 0x0060);
+ pm3386_reg_write(1, 0x002, 0x0060);
+ mdelay(1);
+
+ /* Deassert analog reset. */
+ pm3386_reg_write(0, 0x002, 0x0062);
+ pm3386_reg_write(1, 0x002, 0x0062);
+ mdelay(10);
+
+ /* Deassert digital reset. */
+ pm3386_reg_write(0, 0x002, 0x0063);
+ pm3386_reg_write(1, 0x002, 0x0063);
+ mdelay(10);
+
+ /* Restore programmed MAC addresses. */
+ pm3386_set_mac(0, mac[0]);
+ pm3386_set_mac(1, mac[1]);
+ pm3386_set_mac(2, mac[2]);
+
+ /* Disable carrier on all ports. */
+ pm3386_set_carrier(0, 0);
+ pm3386_set_carrier(1, 0);
+ pm3386_set_carrier(2, 0);
+}
+
+static u16 swaph(u16 x)
+{
+ return ((x << 8) | (x >> 8)) & 0xffff;
+}
+
+void pm3386_init_port(int port)
+{
+ int pm = port >> 1;
+
+ /*
+ * Work around ENP2611 bootloader programming MAC address
+ * in reverse.
+ */
+ if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
+ (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
+ u16 temp[3];
+
+ temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
+ temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
+ temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
+ pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
+ pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
+ pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
+ }
+
+ /*
+ * Initialise narrowbanding mode. See application note 2010486
+ * for more information. (@@@ We also need to issue a reset
+ * when ROOL or DOOL are detected.)
+ */
+ pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
+ udelay(500);
+ pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
+
+ /*
+ * SPI-3 ingress block. Set 64 bytes SPI-3 burst size
+ * towards SPI-3 bridge.
+ */
+ pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
+
+ /*
+ * Enable ingress protocol checking, and soft reset the
+ * SPI-3 ingress block.
+ */
+ pm3386_reg_write(pm, 0x103, 0x0003);
+ while (!(pm3386_reg_read(pm, 0x103) & 0x80))
+ ;
+
+ /*
+ * SPI-3 egress block. Gather 12288 bytes of the current
+ * packet in the TX fifo before initiating transmit on the
+ * SERDES interface. (Prevents TX underflows.)
+ */
+ pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
+
+ /*
+ * Enforce odd parity from the SPI-3 bridge, and soft reset
+ * the SPI-3 egress block.
+ */
+ pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
+ while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
+ ;
+
+ /*
+ * EGMAC block. Set this channels to reject long preambles,
+ * not send or transmit PAUSE frames, enable preamble checking,
+ * disable frame length checking, enable FCS appending, enable
+ * TX frame padding.
+ */
+ pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
+
+ /*
+ * Soft reset the EGMAC block.
+ */
+ pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
+ pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
+
+ /*
+ * Auto-sense autonegotiation status.
+ */
+ pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
+
+ /*
+ * Allow reception of jumbo frames.
+ */
+ pm3386_port_reg_write(port, 0x310, 0x100, 9018);
+
+ /*
+ * Allow transmission of jumbo frames.
+ */
+ pm3386_port_reg_write(port, 0x336, 0x100, 9018);
+
+ /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */
+
+ /*
+ * Set autonegotiation parameters to 'no PAUSE, full duplex.'
+ */
+ pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
+
+ /*
+ * Enable and restart autonegotiation.
+ */
+ pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
+ pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
+}
+
+void pm3386_get_mac(int port, u8 *mac)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x308, 0x100);
+ mac[0] = temp & 0xff;
+ mac[1] = (temp >> 8) & 0xff;
+
+ temp = pm3386_port_reg_read(port, 0x309, 0x100);
+ mac[2] = temp & 0xff;
+ mac[3] = (temp >> 8) & 0xff;
+
+ temp = pm3386_port_reg_read(port, 0x30a, 0x100);
+ mac[4] = temp & 0xff;
+ mac[5] = (temp >> 8) & 0xff;
+}
+
+void pm3386_set_mac(int port, u8 *mac)
+{
+ pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]);
+ pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]);
+ pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]);
+}
+
+static u32 pm3386_get_stat(int port, u16 base)
+{
+ u32 value;
+
+ value = pm3386_port_reg_read(port, base, 0x100);
+ value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
+
+ return value;
+}
+
+void pm3386_get_stats(int port, struct net_device_stats *stats)
+{
+ /*
+ * Snapshot statistics counters.
+ */
+ pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
+ while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
+ ;
+
+ memset(stats, 0, sizeof(*stats));
+
+ stats->rx_packets = pm3386_get_stat(port, 0x510);
+ stats->tx_packets = pm3386_get_stat(port, 0x590);
+ stats->rx_bytes = pm3386_get_stat(port, 0x514);
+ stats->tx_bytes = pm3386_get_stat(port, 0x594);
+ /* @@@ Add other stats. */
+}
+
+void pm3386_set_carrier(int port, int state)
+{
+ pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000);
+}
+
+int pm3386_is_link_up(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x31a, 0x100);
+ temp = pm3386_port_reg_read(port, 0x31a, 0x100);
+
+ return !!(temp & 0x0002);
+}
+
+void pm3386_enable_rx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp |= 0x1000;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+}
+
+void pm3386_disable_rx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp &= 0xefff;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+}
+
+void pm3386_enable_tx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp |= 0x4000;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+}
+
+void pm3386_disable_tx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp &= 0xbfff;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
new file mode 100644
index 00000000000..fe92bb056ac
--- /dev/null
+++ b/drivers/net/ixp2000/pm3386.h
@@ -0,0 +1,28 @@
+/*
+ * Helper functions for the PM3386s on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PM3386_H
+#define __PM3386_H
+
+void pm3386_reset(void);
+void pm3386_init_port(int port);
+void pm3386_get_mac(int port, u8 *mac);
+void pm3386_set_mac(int port, u8 *mac);
+void pm3386_get_stats(int port, struct net_device_stats *stats);
+void pm3386_set_carrier(int port, int state);
+int pm3386_is_link_up(int port);
+void pm3386_enable_rx(int port);
+void pm3386_disable_rx(int port);
+void pm3386_enable_tx(int port);
+void pm3386_disable_tx(int port);
+
+
+#endif
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index f857ae94d26..b0c3b6ab626 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -115,6 +115,7 @@
#include <linux/ethtool.h>
#include <linux/timer.h>
#include <linux/if_vlan.h>
+#include <linux/rtnetlink.h>
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 71fd41122c9..48774efeec7 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -227,8 +227,6 @@ static char mii_preamble_required = 0;
static void tc574_config(dev_link_t *link);
static void tc574_release(dev_link_t *link);
-static int tc574_event(event_t event, int priority,
- event_callback_args_t *args);
static void mdio_sync(kio_addr_t ioaddr, int bits);
static int mdio_read(kio_addr_t ioaddr, int phy_id, int location);
@@ -250,12 +248,7 @@ static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static struct ethtool_ops netdev_ethtool_ops;
static void set_rx_mode(struct net_device *dev);
-static dev_info_t dev_info = "3c574_cs";
-
-static dev_link_t *tc574_attach(void);
-static void tc574_detach(dev_link_t *);
-
-static dev_link_t *dev_list;
+static void tc574_detach(struct pcmcia_device *p_dev);
/*
tc574_attach() creates an "instance" of the driver, allocating
@@ -263,20 +256,18 @@ static dev_link_t *dev_list;
with Card Services.
*/
-static dev_link_t *tc574_attach(void)
+static int tc574_attach(struct pcmcia_device *p_dev)
{
struct el3_private *lp;
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
- int ret;
DEBUG(0, "3c574_attach()\n");
/* Create the PC card device object. */
dev = alloc_etherdev(sizeof(struct el3_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -307,20 +298,13 @@ static dev_link_t *tc574_attach(void)
dev->watchdog_timeo = TX_TIMEOUT;
#endif
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- tc574_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ tc574_config(link);
+
+ return 0;
} /* tc574_attach */
/*
@@ -332,30 +316,19 @@ static dev_link_t *tc574_attach(void)
*/
-static void tc574_detach(dev_link_t *link)
+static void tc574_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
DEBUG(0, "3c574_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
if (link->dev)
unregister_netdev(dev);
if (link->state & DEV_CONFIG)
tc574_release(link);
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
free_netdev(dev);
} /* tc574_detach */
@@ -547,56 +520,37 @@ static void tc574_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-*/
-
-static int tc574_event(event_t event, int priority,
- event_callback_args_t *args)
+static int tc574_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- DEBUG(1, "3c574_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- tc574_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- tc574_reset(dev);
- netif_device_attach(dev);
- }
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
+
+static int tc574_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ tc574_reset(dev);
+ netif_device_attach(dev);
}
- break;
}
+
return 0;
-} /* tc574_event */
+}
static void dump_status(struct net_device *dev)
{
@@ -1292,10 +1246,11 @@ static struct pcmcia_driver tc574_driver = {
.drv = {
.name = "3c574_cs",
},
- .attach = tc574_attach,
- .event = tc574_event,
- .detach = tc574_detach,
+ .probe = tc574_attach,
+ .remove = tc574_detach,
.id_table = tc574_ids,
+ .suspend = tc574_suspend,
+ .resume = tc574_resume,
};
static int __init init_tc574(void)
@@ -1306,7 +1261,6 @@ static int __init init_tc574(void)
static void __exit exit_tc574(void)
{
pcmcia_unregister_driver(&tc574_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_tc574);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index d83fdd8c194..1c3c9c666f7 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -143,8 +143,6 @@ DRV_NAME ".c " DRV_VERSION " 2001/10/13 00:08:50 (David Hinds)";
static void tc589_config(dev_link_t *link);
static void tc589_release(dev_link_t *link);
-static int tc589_event(event_t event, int priority,
- event_callback_args_t *args);
static u16 read_eeprom(kio_addr_t ioaddr, int index);
static void tc589_reset(struct net_device *dev);
@@ -161,12 +159,7 @@ static void el3_tx_timeout(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static struct ethtool_ops netdev_ethtool_ops;
-static dev_info_t dev_info = "3c589_cs";
-
-static dev_link_t *tc589_attach(void);
-static void tc589_detach(dev_link_t *);
-
-static dev_link_t *dev_list;
+static void tc589_detach(struct pcmcia_device *p_dev);
/*======================================================================
@@ -176,20 +169,18 @@ static dev_link_t *dev_list;
======================================================================*/
-static dev_link_t *tc589_attach(void)
+static int tc589_attach(struct pcmcia_device *p_dev)
{
struct el3_private *lp;
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
- int ret;
DEBUG(0, "3c589_attach()\n");
-
+
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct el3_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -206,7 +197,7 @@ static dev_link_t *tc589_attach(void)
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
-
+
/* The EL3-specific entries in the device structure. */
SET_MODULE_OWNER(dev);
dev->hard_start_xmit = &el3_start_xmit;
@@ -221,20 +212,13 @@ static dev_link_t *tc589_attach(void)
#endif
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- tc589_detach(link);
- return NULL;
- }
-
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ tc589_config(link);
+
+ return 0;
} /* tc589_attach */
/*======================================================================
@@ -246,30 +230,19 @@ static dev_link_t *tc589_attach(void)
======================================================================*/
-static void tc589_detach(dev_link_t *link)
+static void tc589_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
-
+
DEBUG(0, "3c589_detach(0x%p)\n", link);
-
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
if (link->dev)
unregister_netdev(dev);
if (link->state & DEV_CONFIG)
tc589_release(link);
-
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
+
free_netdev(dev);
} /* tc589_detach */
@@ -421,58 +394,37 @@ static void tc589_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int tc589_event(event_t event, int priority,
- event_callback_args_t *args)
+static int tc589_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
-
- DEBUG(1, "3c589_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- tc589_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
+
+ return 0;
+}
+
+static int tc589_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- tc589_reset(dev);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ tc589_reset(dev);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
-} /* tc589_event */
+
+ return 0;
+}
/*====================================================================*/
@@ -1067,10 +1019,11 @@ static struct pcmcia_driver tc589_driver = {
.drv = {
.name = "3c589_cs",
},
- .attach = tc589_attach,
- .event = tc589_event,
- .detach = tc589_detach,
+ .probe = tc589_attach,
+ .remove = tc589_detach,
.id_table = tc589_ids,
+ .suspend = tc589_suspend,
+ .resume = tc589_resume,
};
static int __init init_tc589(void)
@@ -1081,7 +1034,6 @@ static int __init init_tc589(void)
static void __exit exit_tc589(void)
{
pcmcia_unregister_driver(&tc589_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_tc589);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 8bb4e85689e..01ddfc8cce3 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -87,8 +87,6 @@ static char *version =
static void axnet_config(dev_link_t *link);
static void axnet_release(dev_link_t *link);
-static int axnet_event(event_t event, int priority,
- event_callback_args_t *args);
static int axnet_open(struct net_device *dev);
static int axnet_close(struct net_device *dev);
static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -107,11 +105,7 @@ static void block_input(struct net_device *dev, int count,
static void block_output(struct net_device *dev, int count,
const u_char *buf, const int start_page);
-static dev_link_t *axnet_attach(void);
-static void axnet_detach(dev_link_t *);
-
-static dev_info_t dev_info = "axnet_cs";
-static dev_link_t *dev_list;
+static void axnet_detach(struct pcmcia_device *p_dev);
static void axdev_setup(struct net_device *dev);
static void AX88190_init(struct net_device *dev, int startp);
@@ -147,13 +141,11 @@ static inline axnet_dev_t *PRIV(struct net_device *dev)
======================================================================*/
-static dev_link_t *axnet_attach(void)
+static int axnet_attach(struct pcmcia_device *p_dev)
{
axnet_dev_t *info;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "axnet_attach()\n");
@@ -161,7 +153,7 @@ static dev_link_t *axnet_attach(void)
"eth%d", axdev_setup);
if (!dev)
- return NULL;
+ return -ENOMEM;
info = PRIV(dev);
link = &info->link;
@@ -176,20 +168,13 @@ static dev_link_t *axnet_attach(void)
dev->do_ioctl = &axnet_ioctl;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- axnet_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ axnet_config(link);
+
+ return 0;
} /* axnet_attach */
/*======================================================================
@@ -201,30 +186,19 @@ static dev_link_t *axnet_attach(void)
======================================================================*/
-static void axnet_detach(dev_link_t *link)
+static void axnet_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
DEBUG(0, "axnet_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
if (link->dev)
unregister_netdev(dev);
if (link->state & DEV_CONFIG)
axnet_release(link);
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
free_netdev(dev);
} /* axnet_detach */
@@ -490,59 +464,39 @@ static void axnet_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int axnet_event(event_t event, int priority,
- event_callback_args_t *args)
+static int axnet_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
- DEBUG(2, "axnet_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- axnet_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
+
+ return 0;
+}
+
+static int axnet_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- axnet_reset_8390(dev);
- AX88190_init(dev, 1);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ axnet_reset_8390(dev);
+ AX88190_init(dev, 1);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
-} /* axnet_event */
+
+ return 0;
+}
+
/*======================================================================
@@ -616,7 +570,7 @@ static int axnet_open(struct net_device *dev)
link->open++;
- request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev);
+ request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, "axnet_cs", dev);
info->link_status = 0x00;
init_timer(&info->watchdog);
@@ -877,10 +831,11 @@ static struct pcmcia_driver axnet_cs_driver = {
.drv = {
.name = "axnet_cs",
},
- .attach = axnet_attach,
- .event = axnet_event,
- .detach = axnet_detach,
+ .probe = axnet_attach,
+ .remove = axnet_detach,
.id_table = axnet_ids,
+ .suspend = axnet_suspend,
+ .resume = axnet_resume,
};
static int __init init_axnet_cs(void)
@@ -891,7 +846,6 @@ static int __init init_axnet_cs(void)
static void __exit exit_axnet_cs(void)
{
pcmcia_unregister_driver(&axnet_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_axnet_cs);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index b9355d9498a..2827a48ea37 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -120,15 +120,8 @@ MODULE_LICENSE("GPL");
static void com20020_config(dev_link_t *link);
static void com20020_release(dev_link_t *link);
-static int com20020_event(event_t event, int priority,
- event_callback_args_t *args);
-static dev_info_t dev_info = "com20020_cs";
-
-static dev_link_t *com20020_attach(void);
-static void com20020_detach(dev_link_t *);
-
-static dev_link_t *dev_list;
+static void com20020_detach(struct pcmcia_device *p_dev);
/*====================================================================*/
@@ -145,21 +138,19 @@ typedef struct com20020_dev_t {
======================================================================*/
-static dev_link_t *com20020_attach(void)
+static int com20020_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
com20020_dev_t *info;
struct net_device *dev;
- int ret;
struct arcnet_local *lp;
-
+
DEBUG(0, "com20020_attach()\n");
/* Create new network device */
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link)
- return NULL;
+ return -ENOMEM;
info = kmalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
if (!info)
@@ -191,30 +182,19 @@ static dev_link_t *com20020_attach(void)
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
-
link->irq.Instance = info->dev = dev;
link->priv = info;
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- com20020_detach(link);
- return NULL;
- }
+ link->state |= DEV_PRESENT;
+ com20020_config(link);
- return link;
+ return 0;
fail_alloc_dev:
kfree(info);
fail_alloc_info:
kfree(link);
- return NULL;
+ return -ENOMEM;
} /* com20020_attach */
/*======================================================================
@@ -226,29 +206,21 @@ fail_alloc_info:
======================================================================*/
-static void com20020_detach(dev_link_t *link)
+static void com20020_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct com20020_dev_t *info = link->priv;
- dev_link_t **linkp;
- struct net_device *dev;
-
+ struct net_device *dev = info->dev;
+
DEBUG(1,"detach...\n");
DEBUG(0, "com20020_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
- dev = info->dev;
-
if (link->dev) {
DEBUG(1,"unregister...\n");
unregister_netdev(dev);
-
+
/*
* this is necessary because we register our IRQ separately
* from card services.
@@ -260,12 +232,8 @@ static void com20020_detach(dev_link_t *link)
if (link->state & DEV_CONFIG)
com20020_release(link);
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
/* Unlink device structure, free bits */
DEBUG(1,"unlinking...\n");
- *linkp = link->next;
if (link->priv)
{
dev = info->dev;
@@ -421,61 +389,41 @@ static void com20020_release(dev_link_t *link)
link->state &= ~(DEV_CONFIG | DEV_RELEASE_PENDING);
}
-/*======================================================================
+static int com20020_suspend(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ com20020_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ if (link->open) {
+ netif_device_detach(dev);
+ }
+ pcmcia_release_configuration(link->handle);
+ }
-======================================================================*/
+ return 0;
+}
-static int com20020_event(event_t event, int priority,
- event_callback_args_t *args)
+static int com20020_resume(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- com20020_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
+ dev_link_t *link = dev_to_instance(p_dev);
+ com20020_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
- DEBUG(1, "com20020_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT;
- com20020_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- if (link->open) {
- netif_device_detach(dev);
- }
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
+ link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- int ioaddr = dev->base_addr;
- struct arcnet_local *lp = dev->priv;
- ARCRESET;
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ int ioaddr = dev->base_addr;
+ struct arcnet_local *lp = dev->priv;
+ ARCRESET;
+ }
}
- break;
- }
- return 0;
-} /* com20020_event */
+
+ return 0;
+}
static struct pcmcia_device_id com20020_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
@@ -488,10 +436,11 @@ static struct pcmcia_driver com20020_cs_driver = {
.drv = {
.name = "com20020_cs",
},
- .attach = com20020_attach,
- .event = com20020_event,
- .detach = com20020_detach,
+ .probe = com20020_attach,
+ .remove = com20020_detach,
.id_table = com20020_ids,
+ .suspend = com20020_suspend,
+ .resume = com20020_resume,
};
static int __init init_com20020_cs(void)
@@ -502,7 +451,6 @@ static int __init init_com20020_cs(void)
static void __exit exit_com20020_cs(void)
{
pcmcia_unregister_driver(&com20020_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_com20020_cs);
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 356f5090922..28fe2fb4d6c 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -88,10 +88,7 @@ static void fmvj18x_config(dev_link_t *link);
static int fmvj18x_get_hwinfo(dev_link_t *link, u_char *node_id);
static int fmvj18x_setup_mfc(dev_link_t *link);
static void fmvj18x_release(dev_link_t *link);
-static int fmvj18x_event(event_t event, int priority,
- event_callback_args_t *args);
-static dev_link_t *fmvj18x_attach(void);
-static void fmvj18x_detach(dev_link_t *);
+static void fmvj18x_detach(struct pcmcia_device *p_dev);
/*
LAN controller(MBH86960A) specific routines
@@ -108,9 +105,6 @@ static void set_rx_mode(struct net_device *dev);
static void fjn_tx_timeout(struct net_device *dev);
static struct ethtool_ops netdev_ethtool_ops;
-static dev_info_t dev_info = "fmvj18x_cs";
-static dev_link_t *dev_list;
-
/*
card type
*/
@@ -234,20 +228,18 @@ typedef struct local_info_t {
#define BANK_1U 0x24 /* bank 1 (CONFIG_1) */
#define BANK_2U 0x28 /* bank 2 (CONFIG_1) */
-static dev_link_t *fmvj18x_attach(void)
+static int fmvj18x_attach(struct pcmcia_device *p_dev)
{
local_info_t *lp;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
-
+
DEBUG(0, "fmvj18x_attach()\n");
/* Make up a FMVJ18x specific data structure */
dev = alloc_etherdev(sizeof(local_info_t));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -262,7 +254,7 @@ static dev_link_t *fmvj18x_attach(void)
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &fjn_interrupt;
link->irq.Instance = dev;
-
+
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
@@ -281,37 +273,24 @@ static dev_link_t *fmvj18x_attach(void)
dev->watchdog_timeo = TX_TIMEOUT;
#endif
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
-
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- fmvj18x_detach(link);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ fmvj18x_config(link);
+
+ return 0;
} /* fmvj18x_attach */
/*====================================================================*/
-static void fmvj18x_detach(dev_link_t *link)
+static void fmvj18x_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
-
+
DEBUG(0, "fmvj18x_detach(0x%p)\n", link);
-
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
if (link->dev)
unregister_netdev(dev);
@@ -319,12 +298,6 @@ static void fmvj18x_detach(dev_link_t *link)
if (link->state & DEV_CONFIG)
fmvj18x_release(link);
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free pieces */
- *linkp = link->next;
free_netdev(dev);
} /* fmvj18x_detach */
@@ -713,51 +686,40 @@ static void fmvj18x_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*====================================================================*/
-
-static int fmvj18x_event(event_t event, int priority,
- event_callback_args_t *args)
+static int fmvj18x_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
- DEBUG(1, "fmvj18x_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- fmvj18x_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
+
+
+ return 0;
+}
+
+static int fmvj18x_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- fjn_reset(dev);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ fjn_reset(dev);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
-} /* fmvj18x_event */
+
+ return 0;
+}
+
+/*====================================================================*/
static struct pcmcia_device_id fmvj18x_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
@@ -789,10 +751,11 @@ static struct pcmcia_driver fmvj18x_cs_driver = {
.drv = {
.name = "fmvj18x_cs",
},
- .attach = fmvj18x_attach,
- .event = fmvj18x_event,
- .detach = fmvj18x_detach,
+ .probe = fmvj18x_attach,
+ .remove = fmvj18x_detach,
.id_table = fmvj18x_ids,
+ .suspend = fmvj18x_suspend,
+ .resume = fmvj18x_resume,
};
static int __init init_fmvj18x_cs(void)
@@ -803,7 +766,6 @@ static int __init init_fmvj18x_cs(void)
static void __exit exit_fmvj18x_cs(void)
{
pcmcia_unregister_driver(&fmvj18x_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_fmvj18x_cs);
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index b6c140eb979..b9c7e39576f 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -108,15 +108,7 @@ MODULE_LICENSE("GPL");
static void ibmtr_config(dev_link_t *link);
static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase);
static void ibmtr_release(dev_link_t *link);
-static int ibmtr_event(event_t event, int priority,
- event_callback_args_t *args);
-
-static dev_info_t dev_info = "ibmtr_cs";
-
-static dev_link_t *ibmtr_attach(void);
-static void ibmtr_detach(dev_link_t *);
-
-static dev_link_t *dev_list;
+static void ibmtr_detach(struct pcmcia_device *p_dev);
/*====================================================================*/
@@ -146,25 +138,23 @@ static struct ethtool_ops netdev_ethtool_ops = {
======================================================================*/
-static dev_link_t *ibmtr_attach(void)
+static int ibmtr_attach(struct pcmcia_device *p_dev)
{
ibmtr_dev_t *info;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "ibmtr_attach()\n");
/* Create new token-ring device */
info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info) return NULL;
+ if (!info) return -ENOMEM;
memset(info,0,sizeof(*info));
dev = alloc_trdev(sizeof(struct tok_info));
- if (!dev) {
- kfree(info);
- return NULL;
- }
+ if (!dev) {
+ kfree(info);
+ return -ENOMEM;
+ }
link = &info->link;
link->priv = info;
@@ -185,25 +175,13 @@ static dev_link_t *ibmtr_attach(void)
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- goto out_detach;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
-out:
- return link;
+ link->state |= DEV_PRESENT;
+ ibmtr_config(link);
-out_detach:
- ibmtr_detach(link);
- link = NULL;
- goto out;
+ return 0;
} /* ibmtr_attach */
/*======================================================================
@@ -215,22 +193,14 @@ out_detach:
======================================================================*/
-static void ibmtr_detach(dev_link_t *link)
+static void ibmtr_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct ibmtr_dev_t *info = link->priv;
- dev_link_t **linkp;
- struct net_device *dev;
+ struct net_device *dev = info->dev;
DEBUG(0, "ibmtr_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
- dev = info->dev;
-
if (link->dev)
unregister_netdev(dev);
@@ -241,13 +211,8 @@ static void ibmtr_detach(dev_link_t *link)
if (link->state & DEV_CONFIG)
ibmtr_release(link);
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
free_netdev(dev);
- kfree(info);
+ kfree(info);
} /* ibmtr_detach */
/*======================================================================
@@ -401,63 +366,40 @@ static void ibmtr_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*======================================================================
+static int ibmtr_suspend(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ ibmtr_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
-======================================================================*/
+ return 0;
+}
-static int ibmtr_event(event_t event, int priority,
- event_callback_args_t *args)
+static int ibmtr_resume(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- ibmtr_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
+ dev_link_t *link = dev_to_instance(p_dev);
+ ibmtr_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
- DEBUG(1, "ibmtr_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- /* set flag to bypass normal interrupt code */
- struct tok_info *priv = netdev_priv(dev);
- priv->sram_phys |= 1;
- netif_device_detach(dev);
- }
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT;
- ibmtr_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
+ link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ ibmtr_probe(dev); /* really? */
+ netif_device_attach(dev);
+ }
}
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- ibmtr_probe(dev); /* really? */
- netif_device_attach(dev);
- }
- }
- break;
- }
- return 0;
-} /* ibmtr_event */
+
+ return 0;
+}
+
/*====================================================================*/
@@ -514,10 +456,11 @@ static struct pcmcia_driver ibmtr_cs_driver = {
.drv = {
.name = "ibmtr_cs",
},
- .attach = ibmtr_attach,
- .event = ibmtr_event,
- .detach = ibmtr_detach,
+ .probe = ibmtr_attach,
+ .remove = ibmtr_detach,
.id_table = ibmtr_ids,
+ .suspend = ibmtr_suspend,
+ .resume = ibmtr_resume,
};
static int __init init_ibmtr_cs(void)
@@ -528,7 +471,6 @@ static int __init init_ibmtr_cs(void)
static void __exit exit_ibmtr_cs(void)
{
pcmcia_unregister_driver(&ibmtr_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_ibmtr_cs);
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 980d7e5d66c..4a232254a49 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -388,9 +388,6 @@ static char *version =
DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
#endif
-static dev_info_t dev_info="nmclan_cs";
-static dev_link_t *dev_list;
-
static char *if_names[]={
"Auto", "10baseT", "BNC",
};
@@ -422,8 +419,6 @@ Function Prototypes
static void nmclan_config(dev_link_t *link);
static void nmclan_release(dev_link_t *link);
-static int nmclan_event(event_t event, int priority,
- event_callback_args_t *args);
static void nmclan_reset(struct net_device *dev);
static int mace_config(struct net_device *dev, struct ifmap *map);
@@ -439,8 +434,7 @@ static void set_multicast_list(struct net_device *dev);
static struct ethtool_ops netdev_ethtool_ops;
-static dev_link_t *nmclan_attach(void);
-static void nmclan_detach(dev_link_t *);
+static void nmclan_detach(struct pcmcia_device *p_dev);
/* ----------------------------------------------------------------------------
nmclan_attach
@@ -449,13 +443,11 @@ nmclan_attach
Services.
---------------------------------------------------------------------------- */
-static dev_link_t *nmclan_attach(void)
+static int nmclan_attach(struct pcmcia_device *p_dev)
{
mace_private *lp;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "nmclan_attach()\n");
DEBUG(1, "%s\n", rcsid);
@@ -463,7 +455,7 @@ static dev_link_t *nmclan_attach(void)
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(mace_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -497,20 +489,13 @@ static dev_link_t *nmclan_attach(void)
dev->watchdog_timeo = TX_TIMEOUT;
#endif
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- nmclan_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ nmclan_config(link);
- return link;
+ return 0;
} /* nmclan_attach */
/* ----------------------------------------------------------------------------
@@ -521,30 +506,19 @@ nmclan_detach
when the device is released.
---------------------------------------------------------------------------- */
-static void nmclan_detach(dev_link_t *link)
+static void nmclan_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
DEBUG(0, "nmclan_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
if (link->dev)
unregister_netdev(dev);
if (link->state & DEV_CONFIG)
nmclan_release(link);
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
free_netdev(dev);
} /* nmclan_detach */
@@ -801,59 +775,39 @@ static void nmclan_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/* ----------------------------------------------------------------------------
-nmclan_event
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
----------------------------------------------------------------------------- */
-static int nmclan_event(event_t event, int priority,
- event_callback_args_t *args)
+static int nmclan_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
- DEBUG(1, "nmclan_event(0x%06x)\n", event);
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- nmclan_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- nmclan_reset(dev);
- netif_device_attach(dev);
+ return 0;
+}
+
+static int nmclan_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ nmclan_reset(dev);
+ netif_device_attach(dev);
+ }
}
- }
- break;
- case CS_EVENT_RESET_REQUEST:
- return 1;
- break;
- }
- return 0;
-} /* nmclan_event */
+
+ return 0;
+}
+
/* ----------------------------------------------------------------------------
nmclan_reset
@@ -1681,10 +1635,11 @@ static struct pcmcia_driver nmclan_cs_driver = {
.drv = {
.name = "nmclan_cs",
},
- .attach = nmclan_attach,
- .event = nmclan_event,
- .detach = nmclan_detach,
+ .probe = nmclan_attach,
+ .remove = nmclan_detach,
.id_table = nmclan_ids,
+ .suspend = nmclan_suspend,
+ .resume = nmclan_resume,
};
static int __init init_nmclan_cs(void)
@@ -1695,7 +1650,6 @@ static int __init init_nmclan_cs(void)
static void __exit exit_nmclan_cs(void)
{
pcmcia_unregister_driver(&nmclan_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_nmclan_cs);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 818c185d643..d85b758f3ef 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -105,8 +105,6 @@ module_param_array(hw_addr, int, NULL, 0);
static void mii_phy_probe(struct net_device *dev);
static void pcnet_config(dev_link_t *link);
static void pcnet_release(dev_link_t *link);
-static int pcnet_event(event_t event, int priority,
- event_callback_args_t *args);
static int pcnet_open(struct net_device *dev);
static int pcnet_close(struct net_device *dev);
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -120,11 +118,9 @@ static int setup_shmem_window(dev_link_t *link, int start_pg,
static int setup_dma_config(dev_link_t *link, int start_pg,
int stop_pg);
-static dev_link_t *pcnet_attach(void);
-static void pcnet_detach(dev_link_t *);
+static void pcnet_detach(struct pcmcia_device *p_dev);
static dev_info_t dev_info = "pcnet_cs";
-static dev_link_t *dev_list;
/*====================================================================*/
@@ -244,19 +240,17 @@ static inline pcnet_dev_t *PRIV(struct net_device *dev)
======================================================================*/
-static dev_link_t *pcnet_attach(void)
+static int pcnet_probe(struct pcmcia_device *p_dev)
{
pcnet_dev_t *info;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "pcnet_attach()\n");
/* Create new ethernet device */
dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
- if (!dev) return NULL;
+ if (!dev) return -ENOMEM;
info = PRIV(dev);
link = &info->link;
link->priv = dev;
@@ -271,20 +265,13 @@ static dev_link_t *pcnet_attach(void)
dev->stop = &pcnet_close;
dev->set_config = &set_config;
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- pcnet_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ pcnet_config(link);
+
+ return 0;
} /* pcnet_attach */
/*======================================================================
@@ -296,31 +283,20 @@ static dev_link_t *pcnet_attach(void)
======================================================================*/
-static void pcnet_detach(dev_link_t *link)
+static void pcnet_detach(struct pcmcia_device *p_dev)
{
- struct net_device *dev = link->priv;
- dev_link_t **linkp;
-
- DEBUG(0, "pcnet_detach(0x%p)\n", link);
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
+ DEBUG(0, "pcnet_detach(0x%p)\n", link);
- if (link->dev)
- unregister_netdev(dev);
+ if (link->dev)
+ unregister_netdev(dev);
- if (link->state & DEV_CONFIG)
- pcnet_release(link);
-
- if (link->handle)
- pcmcia_deregister_client(link->handle);
+ if (link->state & DEV_CONFIG)
+ pcnet_release(link);
- /* Unlink device structure, free bits */
- *linkp = link->next;
- free_netdev(dev);
+ free_netdev(dev);
} /* pcnet_detach */
/*======================================================================
@@ -780,50 +756,39 @@ static void pcnet_release(dev_link_t *link)
======================================================================*/
-static int pcnet_event(event_t event, int priority,
- event_callback_args_t *args)
+static int pcnet_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
- DEBUG(2, "pcnet_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- pcnet_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
+
+ return 0;
+}
+
+static int pcnet_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- pcnet_reset_8390(dev);
- NS8390_init(dev, 1);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ pcnet_reset_8390(dev);
+ NS8390_init(dev, 1);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
-} /* pcnet_event */
+
+ return 0;
+}
+
/*======================================================================
@@ -1844,11 +1809,12 @@ static struct pcmcia_driver pcnet_driver = {
.drv = {
.name = "pcnet_cs",
},
- .attach = pcnet_attach,
- .event = pcnet_event,
- .detach = pcnet_detach,
+ .probe = pcnet_probe,
+ .remove = pcnet_detach,
.owner = THIS_MODULE,
.id_table = pcnet_ids,
+ .suspend = pcnet_suspend,
+ .resume = pcnet_resume,
};
static int __init init_pcnet_cs(void)
@@ -1860,7 +1826,6 @@ static void __exit exit_pcnet_cs(void)
{
DEBUG(0, "pcnet_cs: unloading\n");
pcmcia_unregister_driver(&pcnet_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_pcnet_cs);
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index c7cca842e5e..0122415dfee 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -102,10 +102,6 @@ static const char *version =
currently have room for another Tx packet. */
#define MEMORY_WAIT_TIME 8
-static dev_info_t dev_info = "smc91c92_cs";
-
-static dev_link_t *dev_list;
-
struct smc_private {
dev_link_t link;
spinlock_t lock;
@@ -281,12 +277,9 @@ enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
/*====================================================================*/
-static dev_link_t *smc91c92_attach(void);
-static void smc91c92_detach(dev_link_t *);
+static void smc91c92_detach(struct pcmcia_device *p_dev);
static void smc91c92_config(dev_link_t *link);
static void smc91c92_release(dev_link_t *link);
-static int smc91c92_event(event_t event, int priority,
- event_callback_args_t *args);
static int smc_open(struct net_device *dev);
static int smc_close(struct net_device *dev);
@@ -315,20 +308,18 @@ static struct ethtool_ops ethtool_ops;
======================================================================*/
-static dev_link_t *smc91c92_attach(void)
+static int smc91c92_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
struct smc_private *smc;
dev_link_t *link;
struct net_device *dev;
- int ret;
DEBUG(0, "smc91c92_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct smc_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
smc = netdev_priv(dev);
link = &smc->link;
link->priv = dev;
@@ -366,20 +357,13 @@ static dev_link_t *smc91c92_attach(void)
smc->mii_if.phy_id_mask = 0x1f;
smc->mii_if.reg_num_mask = 0x1f;
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- smc91c92_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ smc91c92_config(link);
- return link;
+ return 0;
} /* smc91c92_attach */
/*======================================================================
@@ -391,30 +375,19 @@ static dev_link_t *smc91c92_attach(void)
======================================================================*/
-static void smc91c92_detach(dev_link_t *link)
+static void smc91c92_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
DEBUG(0, "smc91c92_detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
if (link->dev)
unregister_netdev(dev);
if (link->state & DEV_CONFIG)
smc91c92_release(link);
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free bits */
- *linkp = link->next;
free_netdev(dev);
} /* smc91c92_detach */
@@ -895,6 +868,62 @@ free_cfg_mem:
return rc;
}
+static int smc91c92_suspend(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
+
+static int smc91c92_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+ struct smc_private *smc = netdev_priv(dev);
+ int i;
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ if ((smc->manfid == MANFID_MEGAHERTZ) &&
+ (smc->cardid == PRODID_MEGAHERTZ_EM3288))
+ mhz_3288_power(link);
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (smc->manfid == MANFID_MOTOROLA)
+ mot_config(link);
+ if ((smc->manfid == MANFID_OSITECH) &&
+ (smc->cardid != PRODID_OSITECH_SEVEN)) {
+ /* Power up the card and enable interrupts */
+ set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
+ set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
+ }
+ if (((smc->manfid == MANFID_OSITECH) &&
+ (smc->cardid == PRODID_OSITECH_SEVEN)) ||
+ ((smc->manfid == MANFID_PSION) &&
+ (smc->cardid == PRODID_PSION_NET100))) {
+ /* Download the Seven of Diamonds firmware */
+ for (i = 0; i < sizeof(__Xilinx7OD); i++) {
+ outb(__Xilinx7OD[i], link->io.BasePort1+2);
+ udelay(50);
+ }
+ }
+ if (link->open) {
+ smc_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
+
+ return 0;
+}
+
+
/*======================================================================
This verifies that the chip is some SMC91cXX variant, and returns
@@ -935,14 +964,12 @@ static int check_sig(dev_link_t *link)
}
if (width) {
- event_callback_args_t args;
printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
- args.client_data = link;
- smc91c92_event(CS_EVENT_RESET_PHYSICAL, 0, &args);
+ smc91c92_suspend(link->handle);
pcmcia_release_io(link->handle, &link->io);
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
pcmcia_request_io(link->handle, &link->io);
- smc91c92_event(CS_EVENT_CARD_RESET, 0, &args);
+ smc91c92_resume(link->handle);
return check_sig(link);
}
return -ENODEV;
@@ -1172,82 +1199,6 @@ static void smc91c92_release(dev_link_t *link)
/*======================================================================
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int smc91c92_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- int i;
-
- DEBUG(1, "smc91c92_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- smc91c92_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- if ((smc->manfid == MANFID_MEGAHERTZ) &&
- (smc->cardid == PRODID_MEGAHERTZ_EM3288))
- mhz_3288_power(link);
- pcmcia_request_configuration(link->handle, &link->conf);
- if (smc->manfid == MANFID_MOTOROLA)
- mot_config(link);
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN)) {
- /* Power up the card and enable interrupts */
- set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
- set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
- }
- if (((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid == PRODID_OSITECH_SEVEN)) ||
- ((smc->manfid == MANFID_PSION) &&
- (smc->cardid == PRODID_PSION_NET100))) {
- /* Download the Seven of Diamonds firmware */
- for (i = 0; i < sizeof(__Xilinx7OD); i++) {
- outb(__Xilinx7OD[i], link->io.BasePort1+2);
- udelay(50);
- }
- }
- if (link->open) {
- smc_reset(dev);
- netif_device_attach(dev);
- }
- }
- break;
- }
- return 0;
-} /* smc91c92_event */
-
-/*======================================================================
-
MII interface support for SMC91cXX based cards
======================================================================*/
@@ -2360,10 +2311,11 @@ static struct pcmcia_driver smc91c92_cs_driver = {
.drv = {
.name = "smc91c92_cs",
},
- .attach = smc91c92_attach,
- .event = smc91c92_event,
- .detach = smc91c92_detach,
+ .probe = smc91c92_attach,
+ .remove = smc91c92_detach,
.id_table = smc91c92_ids,
+ .suspend = smc91c92_suspend,
+ .resume = smc91c92_resume,
};
static int __init init_smc91c92_cs(void)
@@ -2374,7 +2326,6 @@ static int __init init_smc91c92_cs(void)
static void __exit exit_smc91c92_cs(void)
{
pcmcia_unregister_driver(&smc91c92_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_smc91c92_cs);
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index ce143f08638..049c34b3706 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -292,8 +292,6 @@ static void mii_wr(kio_addr_t ioaddr, u_char phyaddr, u_char phyreg,
static int has_ce2_string(dev_link_t * link);
static void xirc2ps_config(dev_link_t * link);
static void xirc2ps_release(dev_link_t * link);
-static int xirc2ps_event(event_t event, int priority,
- event_callback_args_t * args);
/****************
* The attach() and detach() entry points are used to create and destroy
@@ -301,8 +299,7 @@ static int xirc2ps_event(event_t event, int priority,
* needed to manage one actual PCMCIA card.
*/
-static dev_link_t *xirc2ps_attach(void);
-static void xirc2ps_detach(dev_link_t *);
+static void xirc2ps_detach(struct pcmcia_device *p_dev);
/****************
* You'll also need to prototype all the functions that will actually
@@ -313,14 +310,6 @@ static void xirc2ps_detach(dev_link_t *);
static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card configuration
- * database.
- */
-
-static dev_info_t dev_info = "xirc2ps_cs";
-
/****************
* A linked list of "instances" of the device. Each actual
* PCMCIA card corresponds to one device instance, and is described
@@ -331,15 +320,7 @@ static dev_info_t dev_info = "xirc2ps_cs";
* device numbers are used to derive the corresponding array index.
*/
-static dev_link_t *dev_list;
-
/****************
- * A dev_link_t structure has fields for most things that are needed
- * to keep track of a socket, but there will usually be some device
- * specific information that also needs to be kept track of. The
- * 'priv' pointer in a dev_link_t structure can be used to point to
- * a device-specific private data structure, like this.
- *
* A driver needs to provide a dev_node_t structure for each device
* on a card. In some cases, there is only one device per card (for
* example, ethernet cards, modems). In other cases, there may be
@@ -571,21 +552,19 @@ mii_wr(kio_addr_t ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len)
* card insertion event.
*/
-static dev_link_t *
-xirc2ps_attach(void)
+static int
+xirc2ps_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
local_info_t *local;
- int err;
DEBUG(0, "attach()\n");
/* Allocate the device structure */
dev = alloc_etherdev(sizeof(local_info_t));
if (!dev)
- return NULL;
+ return -ENOMEM;
local = netdev_priv(dev);
link = &local->link;
link->priv = dev;
@@ -614,19 +593,13 @@ xirc2ps_attach(void)
dev->watchdog_timeo = TX_TIMEOUT;
#endif
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- if ((err = pcmcia_register_client(&link->handle, &client_reg))) {
- cs_error(link->handle, RegisterClient, err);
- xirc2ps_detach(link);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ xirc2ps_config(link);
- return link;
+ return 0;
} /* xirc2ps_attach */
/****************
@@ -637,40 +610,19 @@ xirc2ps_attach(void)
*/
static void
-xirc2ps_detach(dev_link_t * link)
+xirc2ps_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- dev_link_t **linkp;
DEBUG(0, "detach(0x%p)\n", link);
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
- if (!*linkp) {
- DEBUG(0, "detach(0x%p): dev_link lost\n", link);
- return;
- }
-
if (link->dev)
unregister_netdev(dev);
- /*
- * If the device is currently configured and active, we won't
- * actually delete it yet. Instead, it is marked so that when
- * the release() function is called, that will trigger a proper
- * detach().
- */
if (link->state & DEV_CONFIG)
xirc2ps_release(link);
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, free it */
- *linkp = link->next;
free_netdev(dev);
} /* xirc2ps_detach */
@@ -1157,67 +1109,41 @@ xirc2ps_release(dev_link_t *link)
/*====================================================================*/
-/****************
- * The card status event handler. Mostly, this schedules other
- * stuff to run after an event is received. A CARD_REMOVAL event
- * also sets some flags to discourage the net drivers from trying
- * to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag
- * to block future accesses to this device. All the functions that
- * actually access the device should check this flag to make sure
- * the card is still present.
- */
-static int
-xirc2ps_event(event_t event, int priority,
- event_callback_args_t * args)
+static int xirc2ps_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
-
- DEBUG(0, "event(%d)\n", (int)event);
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
- switch (event) {
- case CS_EVENT_REGISTRATION_COMPLETE:
- DEBUG(0, "registration complete\n");
- break;
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- netif_device_detach(dev);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- xirc2ps_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
- if (link->open) {
- netif_device_detach(dev);
- do_powerdown(dev);
- }
- pcmcia_release_configuration(link->handle);
+ if (link->open) {
+ netif_device_detach(dev);
+ do_powerdown(dev);
+ }
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
+
+ return 0;
+}
+
+static int xirc2ps_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- do_reset(dev,1);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ do_reset(dev,1);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
-} /* xirc2ps_event */
+
+ return 0;
+}
+
/*====================================================================*/
@@ -2009,10 +1935,11 @@ static struct pcmcia_driver xirc2ps_cs_driver = {
.drv = {
.name = "xirc2ps_cs",
},
- .attach = xirc2ps_attach,
- .event = xirc2ps_event,
- .detach = xirc2ps_detach,
+ .probe = xirc2ps_attach,
+ .remove = xirc2ps_detach,
.id_table = xirc2ps_ids,
+ .suspend = xirc2ps_suspend,
+ .resume = xirc2ps_resume,
};
static int __init
@@ -2025,7 +1952,6 @@ static void __exit
exit_xirc2ps_cs(void)
{
pcmcia_unregister_driver(&xirc2ps_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_xirc2ps_cs);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index c782a632980..fa39b944bc4 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -6,7 +6,7 @@ menu "PHY device support"
config PHYLIB
tristate "PHY Device support and infrastructure"
- depends on NET_ETHERNET && (BROKEN || !ARCH_S390)
+ depends on NET_ETHERNET && (BROKEN || !S390)
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 1bd22cd40c7..87ee3271b17 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -98,7 +98,6 @@ static const char version[] = "NET3 PLIP version 2.4-parport gniibe@mri.co.jp\n"
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/delay.h>
-#include <linux/lp.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -106,7 +105,6 @@ static const char version[] = "NET3 PLIP version 2.4-parport gniibe@mri.co.jp\n"
#include <linux/skbuff.h>
#include <linux/if_plip.h>
#include <linux/workqueue.h>
-#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/parport.h>
#include <linux/bitops.h>
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index a842ecc60a3..9369f811075 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -85,7 +85,7 @@ static int pppoe_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
static int pppoe_xmit(struct ppp_channel *chan, struct sk_buff *skb);
static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb);
-static struct proto_ops pppoe_ops;
+static const struct proto_ops pppoe_ops;
static DEFINE_RWLOCK(pppoe_hash_lock);
static struct ppp_channel_ops pppoe_chan_ops;
@@ -383,8 +383,6 @@ static int pppoe_rcv(struct sk_buff *skb,
{
struct pppoe_hdr *ph;
struct pppox_sock *po;
- struct sock *sk;
- int ret;
if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
goto drop;
@@ -395,24 +393,8 @@ static int pppoe_rcv(struct sk_buff *skb,
ph = (struct pppoe_hdr *) skb->nh.raw;
po = get_item((unsigned long) ph->sid, eth_hdr(skb)->h_source);
- if (!po)
- goto drop;
-
- sk = sk_pppox(po);
- bh_lock_sock(sk);
-
- /* Socket state is unknown, must put skb into backlog. */
- if (sock_owned_by_user(sk) != 0) {
- sk_add_backlog(sk, skb);
- ret = NET_RX_SUCCESS;
- } else {
- ret = pppoe_rcv_core(sk, skb);
- }
-
- bh_unlock_sock(sk);
- sock_put(sk);
-
- return ret;
+ if (po != NULL)
+ return sk_receive_skb(sk_pppox(po), skb);
drop:
kfree_skb(skb);
out:
@@ -1081,9 +1063,7 @@ static int __init pppoe_proc_init(void)
static inline int pppoe_proc_init(void) { return 0; }
#endif /* CONFIG_PROC_FS */
-/* ->ioctl are set at pppox_create */
-
-static struct proto_ops pppoe_ops = {
+static const struct proto_ops pppoe_ops = {
.family = AF_PPPOX,
.owner = THIS_MODULE,
.release = pppoe_release,
@@ -1099,7 +1079,8 @@ static struct proto_ops pppoe_ops = {
.getsockopt = sock_no_getsockopt,
.sendmsg = pppoe_sendmsg,
.recvmsg = pppoe_recvmsg,
- .mmap = sock_no_mmap
+ .mmap = sock_no_mmap,
+ .ioctl = pppox_ioctl,
};
static struct pppox_proto pppoe_proto = {
diff --git a/drivers/net/pppox.c b/drivers/net/pppox.c
index 0c1e114527f..9315046b3f5 100644
--- a/drivers/net/pppox.c
+++ b/drivers/net/pppox.c
@@ -68,8 +68,7 @@ EXPORT_SYMBOL(register_pppox_proto);
EXPORT_SYMBOL(unregister_pppox_proto);
EXPORT_SYMBOL(pppox_unbind_sock);
-static int pppox_ioctl(struct socket* sock, unsigned int cmd,
- unsigned long arg)
+int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
{
struct sock *sk = sock->sk;
struct pppox_sock *po = pppox_sk(sk);
@@ -105,6 +104,7 @@ static int pppox_ioctl(struct socket* sock, unsigned int cmd,
return rc;
}
+EXPORT_SYMBOL(pppox_ioctl);
static int pppox_create(struct socket *sock, int protocol)
{
@@ -119,11 +119,7 @@ static int pppox_create(struct socket *sock, int protocol)
goto out;
rc = pppox_protos[protocol]->create(sock);
- if (!rc) {
- /* We get to set the ioctl handler. */
- /* For everything else, pppox is just a shell. */
- sock->ops->ioctl = pppox_ioctl;
- }
+
module_put(pppox_protos[protocol]->owner);
out:
return rc;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 669dd52c412..89c46787676 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -66,7 +66,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "Version 2.0.9.3"
+#define DRV_VERSION "Version 2.0.9.4"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -412,7 +412,7 @@ static int init_shared_mem(struct s2io_nic *nic)
config->tx_cfg[i].fifo_len - 1;
mac_control->fifos[i].fifo_no = i;
mac_control->fifos[i].nic = nic;
- mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 1;
+ mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
for (j = 0; j < page_num; j++) {
int k = 0;
@@ -459,6 +459,10 @@ static int init_shared_mem(struct s2io_nic *nic)
}
}
+ nic->ufo_in_band_v = kmalloc((sizeof(u64) * size), GFP_KERNEL);
+ if (!nic->ufo_in_band_v)
+ return -ENOMEM;
+
/* Allocation and initialization of RXDs in Rings */
size = 0;
for (i = 0; i < config->rx_ring_num; i++) {
@@ -731,6 +735,8 @@ static void free_shared_mem(struct s2io_nic *nic)
mac_control->stats_mem,
mac_control->stats_mem_phy);
}
+ if (nic->ufo_in_band_v)
+ kfree(nic->ufo_in_band_v);
}
/**
@@ -2003,6 +2009,49 @@ static int start_nic(struct s2io_nic *nic)
return SUCCESS;
}
+/**
+ * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
+ */
+static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, int get_off)
+{
+ nic_t *nic = fifo_data->nic;
+ struct sk_buff *skb;
+ TxD_t *txds;
+ u16 j, frg_cnt;
+
+ txds = txdlp;
+ if (txds->Host_Control == (u64)(long)nic->ufo_in_band_v) {
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ txds->Buffer_Pointer, sizeof(u64),
+ PCI_DMA_TODEVICE);
+ txds++;
+ }
+
+ skb = (struct sk_buff *) ((unsigned long)
+ txds->Host_Control);
+ if (!skb) {
+ memset(txdlp, 0, (sizeof(TxD_t) * fifo_data->max_txds));
+ return NULL;
+ }
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ txds->Buffer_Pointer,
+ skb->len - skb->data_len,
+ PCI_DMA_TODEVICE);
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ if (frg_cnt) {
+ txds++;
+ for (j = 0; j < frg_cnt; j++, txds++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
+ if (!txds->Buffer_Pointer)
+ break;
+ pci_unmap_page(nic->pdev, (dma_addr_t)
+ txds->Buffer_Pointer,
+ frag->size, PCI_DMA_TODEVICE);
+ }
+ }
+ txdlp->Host_Control = 0;
+ return(skb);
+}
/**
* free_tx_buffers - Free all queued Tx buffers
@@ -2020,7 +2069,7 @@ static void free_tx_buffers(struct s2io_nic *nic)
int i, j;
mac_info_t *mac_control;
struct config_param *config;
- int cnt = 0, frg_cnt;
+ int cnt = 0;
mac_control = &nic->mac_control;
config = &nic->config;
@@ -2029,38 +2078,11 @@ static void free_tx_buffers(struct s2io_nic *nic)
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
list_virt_addr;
- skb =
- (struct sk_buff *) ((unsigned long) txdp->
- Host_Control);
- if (skb == NULL) {
- memset(txdp, 0, sizeof(TxD_t) *
- config->max_txds);
- continue;
- }
- frg_cnt = skb_shinfo(skb)->nr_frags;
- pci_unmap_single(nic->pdev, (dma_addr_t)
- txdp->Buffer_Pointer,
- skb->len - skb->data_len,
- PCI_DMA_TODEVICE);
- if (frg_cnt) {
- TxD_t *temp;
- temp = txdp;
- txdp++;
- for (j = 0; j < frg_cnt; j++, txdp++) {
- skb_frag_t *frag =
- &skb_shinfo(skb)->frags[j];
- pci_unmap_page(nic->pdev,
- (dma_addr_t)
- txdp->
- Buffer_Pointer,
- frag->size,
- PCI_DMA_TODEVICE);
- }
- txdp = temp;
+ skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
+ if (skb) {
+ dev_kfree_skb(skb);
+ cnt++;
}
- dev_kfree_skb(skb);
- memset(txdp, 0, sizeof(TxD_t) * config->max_txds);
- cnt++;
}
DBG_PRINT(INTR_DBG,
"%s:forcibly freeing %d skbs on FIFO%d\n",
@@ -2661,7 +2683,6 @@ static void tx_intr_handler(fifo_info_t *fifo_data)
tx_curr_get_info_t get_info, put_info;
struct sk_buff *skb;
TxD_t *txdlp;
- u16 j, frg_cnt;
get_info = fifo_data->tx_curr_get_info;
put_info = fifo_data->tx_curr_put_info;
@@ -2684,8 +2705,7 @@ to loss of link\n");
}
}
- skb = (struct sk_buff *) ((unsigned long)
- txdlp->Host_Control);
+ skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
if (skb == NULL) {
DBG_PRINT(ERR_DBG, "%s: Null skb ",
__FUNCTION__);
@@ -2693,34 +2713,6 @@ to loss of link\n");
return;
}
- frg_cnt = skb_shinfo(skb)->nr_frags;
- nic->tx_pkt_count++;
-
- pci_unmap_single(nic->pdev, (dma_addr_t)
- txdlp->Buffer_Pointer,
- skb->len - skb->data_len,
- PCI_DMA_TODEVICE);
- if (frg_cnt) {
- TxD_t *temp;
- temp = txdlp;
- txdlp++;
- for (j = 0; j < frg_cnt; j++, txdlp++) {
- skb_frag_t *frag =
- &skb_shinfo(skb)->frags[j];
- if (!txdlp->Buffer_Pointer)
- break;
- pci_unmap_page(nic->pdev,
- (dma_addr_t)
- txdlp->
- Buffer_Pointer,
- frag->size,
- PCI_DMA_TODEVICE);
- }
- txdlp = temp;
- }
- memset(txdlp, 0,
- (sizeof(TxD_t) * fifo_data->max_txds));
-
/* Updating the statistics block */
nic->stats.tx_bytes += skb->len;
dev_kfree_skb_irq(skb);
@@ -3331,7 +3323,7 @@ failed\n", dev->name);
s2io_msix_fifo_handle, 0, sp->desc1,
sp->s2io_entries[i].arg);
DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1,
- sp->msix_info[i].addr);
+ (unsigned long long)sp->msix_info[i].addr);
} else {
sprintf(sp->desc2, "%s:MSI-X-%d-RX",
dev->name, i);
@@ -3339,7 +3331,7 @@ failed\n", dev->name);
s2io_msix_ring_handle, 0, sp->desc2,
sp->s2io_entries[i].arg);
DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2,
- sp->msix_info[i].addr);
+ (unsigned long long)sp->msix_info[i].addr);
}
if (err) {
DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
@@ -3527,6 +3519,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
+ txdp->Control_1 = 0;
+ txdp->Control_2 = 0;
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
if (mss) {
@@ -3534,19 +3528,13 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
txdp->Control_1 |= TXD_TCP_LSO_MSS(mss);
}
#endif
-
- frg_cnt = skb_shinfo(skb)->nr_frags;
- frg_len = skb->len - skb->data_len;
-
- txdp->Buffer_Pointer = pci_map_single
- (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
- txdp->Host_Control = (unsigned long) skb;
if (skb->ip_summed == CHECKSUM_HW) {
txdp->Control_2 |=
(TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
TXD_TX_CKO_UDP_EN);
}
-
+ txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
+ txdp->Control_1 |= TXD_LIST_OWN_XENA;
txdp->Control_2 |= config->tx_intr_type;
if (sp->vlgrp && vlan_tx_tag_present(skb)) {
@@ -3554,10 +3542,40 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
}
- txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
- TXD_GATHER_CODE_FIRST);
- txdp->Control_1 |= TXD_LIST_OWN_XENA;
+ frg_len = skb->len - skb->data_len;
+ if (skb_shinfo(skb)->ufo_size) {
+ int ufo_size;
+
+ ufo_size = skb_shinfo(skb)->ufo_size;
+ ufo_size &= ~7;
+ txdp->Control_1 |= TXD_UFO_EN;
+ txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
+ txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
+#ifdef __BIG_ENDIAN
+ sp->ufo_in_band_v[put_off] =
+ (u64)skb_shinfo(skb)->ip6_frag_id;
+#else
+ sp->ufo_in_band_v[put_off] =
+ (u64)skb_shinfo(skb)->ip6_frag_id << 32;
+#endif
+ txdp->Host_Control = (unsigned long)sp->ufo_in_band_v;
+ txdp->Buffer_Pointer = pci_map_single(sp->pdev,
+ sp->ufo_in_band_v,
+ sizeof(u64), PCI_DMA_TODEVICE);
+ txdp++;
+ txdp->Control_1 = 0;
+ txdp->Control_2 = 0;
+ }
+
+ txdp->Buffer_Pointer = pci_map_single
+ (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
+ txdp->Host_Control = (unsigned long) skb;
+ txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
+ if (skb_shinfo(skb)->ufo_size)
+ txdp->Control_1 |= TXD_UFO_EN;
+
+ frg_cnt = skb_shinfo(skb)->nr_frags;
/* For fragmented SKB. */
for (i = 0; i < frg_cnt; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -3569,9 +3587,14 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
(sp->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size);
+ if (skb_shinfo(skb)->ufo_size)
+ txdp->Control_1 |= TXD_UFO_EN;
}
txdp->Control_1 |= TXD_GATHER_CODE_LAST;
+ if (skb_shinfo(skb)->ufo_size)
+ frg_cnt++; /* as Txd0 was used for inband header */
+
tx_fifo = mac_control->tx_FIFO_start[queue];
val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
writeq(val64, &tx_fifo->TxDL_Pointer);
@@ -3583,6 +3606,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
if (mss)
val64 |= TX_FIFO_SPECIAL_FUNC;
#endif
+ if (skb_shinfo(skb)->ufo_size)
+ val64 |= TX_FIFO_SPECIAL_FUNC;
writeq(val64, &tx_fifo->List_Control);
mmiowb();
@@ -4721,7 +4746,10 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
fail = 1;
if (ret_data != 0x012345) {
- DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
+ "Data written %llx Data read %llx\n",
+ dev->name, (unsigned long long)0x12345,
+ (unsigned long long)ret_data);
fail = 1;
}
@@ -4740,7 +4768,10 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
fail = 1;
if (ret_data != 0x012345) {
- DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
+ "Data written %llx Data read %llx\n",
+ dev->name, (unsigned long long)0x12345,
+ (unsigned long long)ret_data);
fail = 1;
}
@@ -5190,6 +5221,8 @@ static struct ethtool_ops netdev_ethtool_ops = {
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
#endif
+ .get_ufo = ethtool_op_get_ufo,
+ .set_ufo = ethtool_op_set_ufo,
.self_test_count = s2io_ethtool_self_test_count,
.self_test = s2io_ethtool_test,
.get_strings = s2io_ethtool_get_strings,
@@ -5941,7 +5974,8 @@ Defaulting to INTA\n");
break;
}
}
- config->max_txds = MAX_SKB_FRAGS + 1;
+ /* + 2 because one Txd for skb->data and one Txd for UFO */
+ config->max_txds = MAX_SKB_FRAGS + 2;
/* Rx side parameters. */
if (rx_ring_sz[0] == 0)
@@ -6035,6 +6069,10 @@ Defaulting to INTA\n");
#ifdef NETIF_F_TSO
dev->features |= NETIF_F_TSO;
#endif
+ if (sp->device_type & XFRAME_II_DEVICE) {
+ dev->features |= NETIF_F_UFO;
+ dev->features |= NETIF_F_HW_CSUM;
+ }
dev->tx_timeout = &s2io_tx_watchdog;
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 419aad7f10e..852a6a899d0 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -393,7 +393,9 @@ typedef struct _TxD {
#define TXD_GATHER_CODE_LAST BIT(23)
#define TXD_TCP_LSO_EN BIT(30)
#define TXD_UDP_COF_EN BIT(31)
+#define TXD_UFO_EN BIT(31) | BIT(30)
#define TXD_TCP_LSO_MSS(val) vBIT(val,34,14)
+#define TXD_UFO_MSS(val) vBIT(val,34,14)
#define TXD_BUFFER0_SIZE(val) vBIT(val,48,16)
u64 Control_2;
@@ -789,6 +791,7 @@ struct s2io_nic {
spinlock_t rx_lock;
atomic_t isr_cnt;
+ u64 *ufo_in_band_v;
};
#define RESET_ERROR 1;
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 1d4d88680db..3d95fa20cd8 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1,6 +1,6 @@
/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux.
Copyright 1999 Silicon Integrated System Corporation
- Revision: 1.08.08 Jan. 22 2005
+ Revision: 1.08.09 Sep. 19 2005
Modified from the driver which is originally written by Donald Becker.
@@ -17,6 +17,7 @@
SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
preliminary Rev. 1.0 Jan. 18, 1998
+ Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support
Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages
Rev 1.08.07 Nov. 2 2003 Daniele Venzano <webvenza@libero.it> add suspend/resume support
Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support
@@ -76,7 +77,7 @@
#include "sis900.h"
#define SIS900_MODULE_NAME "sis900"
-#define SIS900_DRV_VERSION "v1.08.08 Jan. 22 2005"
+#define SIS900_DRV_VERSION "v1.08.09 Sep. 19 2005"
static char version[] __devinitdata =
KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
@@ -538,6 +539,11 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
printk("%2.2x:", (u8)net_dev->dev_addr[i]);
printk("%2.2x.\n", net_dev->dev_addr[i]);
+ /* Detect Wake on Lan support */
+ ret = inl(CFGPMC & PMESP);
+ if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
+ printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
+
return 0;
err_unmap_rx:
@@ -2015,6 +2021,67 @@ static int sis900_nway_reset(struct net_device *net_dev)
return mii_nway_restart(&sis_priv->mii_info);
}
+/**
+ * sis900_set_wol - Set up Wake on Lan registers
+ * @net_dev: the net device to probe
+ * @wol: container for info passed to the driver
+ *
+ * Process ethtool command "wol" to setup wake on lan features.
+ * SiS900 supports sending WoL events if a correct packet is received,
+ * but there is no simple way to filter them to only a subset (broadcast,
+ * multicast, unicast or arp).
+ */
+
+static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ long pmctrl_addr = net_dev->base_addr + pmctrl;
+ u32 cfgpmcsr = 0, pmctrl_bits = 0;
+
+ if (wol->wolopts == 0) {
+ pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
+ cfgpmcsr |= ~PME_EN;
+ pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
+ outl(pmctrl_bits, pmctrl_addr);
+ if (netif_msg_wol(sis_priv))
+ printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name);
+ return 0;
+ }
+
+ if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST
+ | WAKE_BCAST | WAKE_ARP))
+ return -EINVAL;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ pmctrl_bits |= MAGICPKT;
+ if (wol->wolopts & WAKE_PHY)
+ pmctrl_bits |= LINKON;
+
+ outl(pmctrl_bits, pmctrl_addr);
+
+ pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
+ cfgpmcsr |= PME_EN;
+ pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
+ if (netif_msg_wol(sis_priv))
+ printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name);
+
+ return 0;
+}
+
+static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
+{
+ long pmctrl_addr = net_dev->base_addr + pmctrl;
+ u32 pmctrl_bits;
+
+ pmctrl_bits = inl(pmctrl_addr);
+ if (pmctrl_bits & MAGICPKT)
+ wol->wolopts |= WAKE_MAGIC;
+ if (pmctrl_bits & LINKON)
+ wol->wolopts |= WAKE_PHY;
+
+ wol->supported = (WAKE_PHY | WAKE_MAGIC);
+}
+
static struct ethtool_ops sis900_ethtool_ops = {
.get_drvinfo = sis900_get_drvinfo,
.get_msglevel = sis900_get_msglevel,
@@ -2023,6 +2090,8 @@ static struct ethtool_ops sis900_ethtool_ops = {
.get_settings = sis900_get_settings,
.set_settings = sis900_set_settings,
.nway_reset = sis900_nway_reset,
+ .get_wol = sis900_get_wol,
+ .set_wol = sis900_set_wol
};
/**
diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h
index de3c06735d1..4233ea55670 100644
--- a/drivers/net/sis900.h
+++ b/drivers/net/sis900.h
@@ -33,6 +33,7 @@ enum sis900_registers {
rxcfg=0x34, //Receive Configuration Register
flctrl=0x38, //Flow Control Register
rxlen=0x3c, //Receive Packet Length Register
+ cfgpmcsr=0x44, //Configuration Power Management Control/Status Register
rfcr=0x48, //Receive Filter Control Register
rfdr=0x4C, //Receive Filter Data Register
pmctrl=0xB0, //Power Management Control Register
@@ -140,6 +141,50 @@ enum sis96x_eeprom_command {
EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100
};
+/* PCI Registers */
+enum sis900_pci_registers {
+ CFGPMC = 0x40,
+ CFGPMCSR = 0x44
+};
+
+/* Power management capabilities bits */
+enum sis900_cfgpmc_register_bits {
+ PMVER = 0x00070000,
+ DSI = 0x00100000,
+ PMESP = 0xf8000000
+};
+
+enum sis900_pmesp_bits {
+ PME_D0 = 0x1,
+ PME_D1 = 0x2,
+ PME_D2 = 0x4,
+ PME_D3H = 0x8,
+ PME_D3C = 0x10
+};
+
+/* Power management control/status bits */
+enum sis900_cfgpmcsr_register_bits {
+ PMESTS = 0x00004000,
+ PME_EN = 0x00000100, // Power management enable
+ PWR_STA = 0x00000003 // Current power state
+};
+
+/* Wake-on-LAN support. */
+enum sis900_power_management_control_register_bits {
+ LINKLOSS = 0x00000001,
+ LINKON = 0x00000002,
+ MAGICPKT = 0x00000400,
+ ALGORITHM = 0x00000800,
+ FRM1EN = 0x00100000,
+ FRM2EN = 0x00200000,
+ FRM3EN = 0x00400000,
+ FRM1ACS = 0x01000000,
+ FRM2ACS = 0x02000000,
+ FRM3ACS = 0x04000000,
+ WAKEALL = 0x40000000,
+ GATECLK = 0x80000000
+};
+
/* Management Data I/O (mdio) frame */
#define MIIread 0x6000
#define MIIwrite 0x5002
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
index 7653d6e33aa..afd900d5d73 100644
--- a/drivers/net/sk98lin/Makefile
+++ b/drivers/net/sk98lin/Makefile
@@ -26,8 +26,7 @@ sk98lin-objs := \
skrlmt.o \
sktimer.o \
skvpd.o \
- skxmac2.o \
- skproc.o
+ skxmac2.o
# DBGDEF = \
# -DDEBUG
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
index 2dc5728e3ef..778d9e618eb 100644
--- a/drivers/net/sk98lin/h/skdrv2nd.h
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
@@ -60,7 +60,6 @@ extern SK_U64 SkOsGetTime(SK_AC*);
extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*);
extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*);
-extern int SkPciWriteCfgDWord(SK_AC*, int, SK_U32);
extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16);
extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8);
extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
@@ -268,8 +267,6 @@ typedef struct s_DevNet DEV_NET;
struct s_DevNet {
int PortNr;
int NetNr;
- int Mtu;
- int Up;
SK_AC *pAC;
};
@@ -298,6 +295,7 @@ struct s_RxPort {
RXD *pRxdRingTail; /* Tail of Rx rings */
RXD *pRxdRingPrev; /* descriptor given to BMU previously */
int RxdRingFree; /* # of free entrys */
+ int RxCsum; /* use receive checksum hardware */
spinlock_t RxDesRingLock; /* serialize descriptor accesses */
int RxFillLimit; /* limit for buffers in ring */
SK_IOC HwAddr; /* bmu registers address */
@@ -390,12 +388,10 @@ struct s_AC {
SK_IOC IoBase; /* register set of adapter */
int BoardLevel; /* level of active hw init (0-2) */
- char DeviceStr[80]; /* adapter string from vpd */
+
SK_U32 AllocFlag; /* flag allocation of resources */
struct pci_dev *PciDev; /* for access to pci config space */
- SK_U32 PciDevId; /* pci device id */
struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */
- char Name[30]; /* driver name */
int RxBufSize; /* length of receive buffers */
struct net_device_stats stats; /* linux 'netstat -i' statistics */
@@ -430,7 +426,6 @@ struct s_AC {
DIM_INFO DynIrqModInfo; /* all data related to DIM */
/* Only for tests */
- int PortUp;
int PortDown;
int ChipsetType; /* Chipset family type
* 0 == Genesis family support
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
index bdc1a5eaaae..daa9a8d154f 100644
--- a/drivers/net/sk98lin/h/skvpd.h
+++ b/drivers/net/sk98lin/h/skvpd.h
@@ -130,14 +130,12 @@ typedef struct s_vpd_key {
#ifndef VPD_DO_IO
#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val)
#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val)
-#define VPD_OUT32(pAC,IoC,Addr,Val) (void)SkPciWriteCfgDWord(pAC,Addr,Val)
#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal)
#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal)
#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal)
#else /* VPD_DO_IO */
#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val)
#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val)
-#define VPD_OUT32(pAC,IoC,Addr,Val) SK_OUT32(IoC,PCI_C(Addr),Val)
#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal)
#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal)
#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal)
@@ -155,12 +153,6 @@ typedef struct s_vpd_key {
else \
SK_OUT16(pAC,PCI_C(Addr),Val); \
}
-#define VPD_OUT32(pAC,Ioc,Addr,Val) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
- SkPciWriteCfgDWord(pAC,Addr,Val); \
- else \
- SK_OUT32(pAC,PCI_C(Addr),Val); \
- }
#define VPD_IN8(pAC,Ioc,Addr,pVal) { \
if ((pAC)->DgT.DgUseCfgCycle) \
SkPciReadCfgByte(pAC,Addr,pVal); \
diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c
index b71769ae460..4265ed91a9c 100644
--- a/drivers/net/sk98lin/skethtool.c
+++ b/drivers/net/sk98lin/skethtool.c
@@ -539,6 +539,48 @@ static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *ep
return ret ? -EIO : 0;
}
+/* Only Yukon supports checksum offload. */
+static int setScatterGather(struct net_device *dev, u32 data)
+{
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
+ return -EOPNOTSUPP;
+ return ethtool_op_set_sg(dev, data);
+}
+
+static int setTxCsum(struct net_device *dev, u32 data)
+{
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
+ return -EOPNOTSUPP;
+
+ return ethtool_op_set_tx_csum(dev, data);
+}
+
+static u32 getRxCsum(struct net_device *dev)
+{
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+
+ return pAC->RxPort[pNet->PortNr].RxCsum;
+}
+
+static int setRxCsum(struct net_device *dev, u32 data)
+{
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
+ return -EOPNOTSUPP;
+
+ pAC->RxPort[pNet->PortNr].RxCsum = data != 0;
+ return 0;
+}
+
struct ethtool_ops SkGeEthtoolOps = {
.get_settings = getSettings,
.set_settings = setSettings,
@@ -551,4 +593,10 @@ struct ethtool_ops SkGeEthtoolOps = {
.set_pauseparam = setPauseParams,
.get_link = ethtool_op_get_link,
.get_perm_addr = ethtool_op_get_perm_addr,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = setScatterGather,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = setTxCsum,
+ .get_rx_csum = getRxCsum,
+ .set_rx_csum = setRxCsum,
};
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index ae734393475..9a76ac180b1 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -107,10 +107,10 @@
#include "h/skversion.h"
+#include <linux/in.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <linux/dma-mapping.h>
#include <linux/ip.h>
@@ -206,7 +206,6 @@ static void SkGeSetRxMode(struct SK_NET_DEVICE *dev);
static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
static void GetConfiguration(SK_AC*);
-static void ProductStr(SK_AC*);
static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
static void FillRxRing(SK_AC*, RX_PORT*);
@@ -235,28 +234,6 @@ static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr);
* Extern Function Prototypes
*
******************************************************************************/
-static const char SKRootName[] = "net/sk98lin";
-static struct proc_dir_entry *pSkRootDir;
-extern struct file_operations sk_proc_fops;
-
-static inline void SkGeProcCreate(struct net_device *dev)
-{
- struct proc_dir_entry *pe;
-
- if (pSkRootDir &&
- (pe = create_proc_entry(dev->name, S_IRUGO, pSkRootDir))) {
- pe->proc_fops = &sk_proc_fops;
- pe->data = dev;
- pe->owner = THIS_MODULE;
- }
-}
-
-static inline void SkGeProcRemove(struct net_device *dev)
-{
- if (pSkRootDir)
- remove_proc_entry(dev->name, pSkRootDir);
-}
-
extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);
extern void SkDimDisplayModerationSettings(SK_AC *pAC);
extern void SkDimStartModerationTimer(SK_AC *pAC);
@@ -279,6 +256,27 @@ static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};
/*****************************************************************************
*
+ * SkPciWriteCfgDWord - write a 32 bit value to pci config space
+ *
+ * Description:
+ * This routine writes a 32 bit value to the pci configuration
+ * space.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+static inline int SkPciWriteCfgDWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U32 Val) /* pointer to store the read value */
+{
+ pci_write_config_dword(pAC->PciDev, PciAddr, Val);
+ return(0);
+} /* SkPciWriteCfgDWord */
+
+/*****************************************************************************
+ *
* SkGeInitPCI - Init the PCI resources
*
* Description:
@@ -300,7 +298,7 @@ int SkGeInitPCI(SK_AC *pAC)
dev->mem_start = pci_resource_start (pdev, 0);
pci_set_master(pdev);
- if (pci_request_regions(pdev, pAC->Name) != 0) {
+ if (pci_request_regions(pdev, "sk98lin") != 0) {
retval = 2;
goto out_disable;
}
@@ -578,10 +576,10 @@ SK_BOOL DualNet;
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
if (pAC->GIni.GIMacsFound == 2) {
- Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
} else if (pAC->GIni.GIMacsFound == 1) {
Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
- pAC->Name, dev);
+ "sk98lin", dev);
} else {
printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
pAC->GIni.GIMacsFound);
@@ -1265,7 +1263,6 @@ struct SK_NET_DEVICE *dev)
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
pAC->MaxPorts++;
- pNet->Up = 1;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
@@ -1395,7 +1392,6 @@ struct SK_NET_DEVICE *dev)
sizeof(SK_PNMI_STRUCT_DATA));
pAC->MaxPorts--;
- pNet->Up = 0;
return (0);
} /* SkGeClose */
@@ -2175,7 +2171,6 @@ rx_start:
pMsg->ip_summed = CHECKSUM_NONE;
#endif
-
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V"));
ForRlmt = SK_RLMT_RX_PROTOCOL;
#if 0
@@ -2550,7 +2545,7 @@ unsigned long Flags;
static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
{
DEV_NET *pNet;
-DEV_NET *pOtherNet;
+struct net_device *pOtherDev;
SK_AC *pAC;
unsigned long Flags;
int i;
@@ -2580,11 +2575,11 @@ SK_EVPARA EvPara;
}
#endif
- pNet->Mtu = NewMtu;
- pOtherNet = netdev_priv(pAC->dev[1 - pNet->NetNr]);
- if ((pOtherNet->Mtu>1500) && (NewMtu<=1500) && (pOtherNet->Up==1)) {
- return(0);
- }
+ pOtherDev = pAC->dev[1 - pNet->NetNr];
+
+ if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500)
+ && (NewMtu <= 1500))
+ return 0;
pAC->RxBufSize = NewMtu + 32;
dev->mtu = NewMtu;
@@ -2746,7 +2741,8 @@ SK_EVPARA EvPara;
EvPara.Para32[1] = -1;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
- if (pOtherNet->Up) {
+ if (netif_running(pOtherDev)) {
+ DEV_NET *pOtherNet = netdev_priv(pOtherDev);
EvPara.Para32[0] = pOtherNet->PortNr;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
}
@@ -2820,7 +2816,7 @@ unsigned long Flags; /* for spin lock */
pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;
- if (pNet->Mtu <= 1500) {
+ if (dev->mtu <= 1500) {
pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
} else {
pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
@@ -3771,25 +3767,21 @@ int Capabilities[3][3] =
*
* Returns: N/A
*/
-static void ProductStr(
-SK_AC *pAC /* pointer to adapter context */
+static inline int ProductStr(
+ SK_AC *pAC, /* pointer to adapter context */
+ char *DeviceStr, /* result string */
+ int StrLen /* length of the string */
)
{
-int StrLen = 80; /* length of the string, defined in SK_AC */
char Keyword[] = VPD_NAME; /* vpd productname identifier */
int ReturnCode; /* return code from vpd_read */
unsigned long Flags;
spin_lock_irqsave(&pAC->SlowPathLock, Flags);
- ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr,
- &StrLen);
+ ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen);
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- if (ReturnCode != 0) {
- /* there was an error reading the vpd data */
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
- ("Error reading VPD data: %d\n", ReturnCode));
- pAC->DeviceStr[0] = '\0';
- }
+
+ return ReturnCode;
} /* ProductStr */
/*****************************************************************************
@@ -3992,28 +3984,6 @@ SK_U8 *pVal) /* pointer to store the read value */
/*****************************************************************************
*
- * SkPciWriteCfgDWord - write a 32 bit value to pci config space
- *
- * Description:
- * This routine writes a 32 bit value to the pci configuration
- * space.
- *
- * Returns:
- * 0 - indicate everything worked ok.
- * != 0 - error indication
- */
-int SkPciWriteCfgDWord(
-SK_AC *pAC, /* Adapter Control structure pointer */
-int PciAddr, /* PCI register address */
-SK_U32 Val) /* pointer to store the read value */
-{
- pci_write_config_dword(pAC->PciDev, PciAddr, Val);
- return(0);
-} /* SkPciWriteCfgDWord */
-
-
-/*****************************************************************************
- *
* SkPciWriteCfgWord - write a 16 bit value to pci config space
*
* Description:
@@ -4150,6 +4120,7 @@ SK_BOOL DualNet;
Flags);
break;
case SK_DRV_NET_UP: /* SK_U32 PortIdx */
+ { struct net_device *dev = pAC->dev[Param.Para32[0]];
/* action list 5 */
FromPort = Param.Para32[0];
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
@@ -4233,22 +4204,12 @@ SK_BOOL DualNet;
printk(" irq moderation: disabled\n");
-#ifdef SK_ZEROCOPY
- if (pAC->ChipsetType)
-#ifdef USE_SK_TX_CHECKSUM
- printk(" scatter-gather: enabled\n");
-#else
- printk(" tx-checksum: disabled\n");
-#endif
- else
- printk(" scatter-gather: disabled\n");
-#else
- printk(" scatter-gather: disabled\n");
-#endif
-
-#ifndef USE_SK_RX_CHECKSUM
- printk(" rx-checksum: disabled\n");
-#endif
+ printk(" scatter-gather: %s\n",
+ (dev->features & NETIF_F_SG) ? "enabled" : "disabled");
+ printk(" tx-checksum: %s\n",
+ (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled");
+ printk(" rx-checksum: %s\n",
+ pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled");
} else {
DoPrintInterfaceChange = SK_TRUE;
@@ -4263,9 +4224,9 @@ SK_BOOL DualNet;
}
/* Inform the world that link protocol is up. */
- netif_carrier_on(pAC->dev[Param.Para32[0]]);
-
+ netif_carrier_on(dev);
break;
+ }
case SK_DRV_NET_DOWN: /* SK_U32 Reason */
/* action list 7 */
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
@@ -4479,7 +4440,7 @@ SK_AC *pAc) /* pointer to adapter context */
pAC->DiagModeActive = DIAG_ACTIVE;
if (pAC->BoardLevel > SK_INIT_DATA) {
- if (pNet->Up) {
+ if (netif_running(pAC->dev[0])) {
pAC->WasIfUp[0] = SK_TRUE;
pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
DoPrintInterfaceChange = SK_FALSE;
@@ -4489,7 +4450,7 @@ SK_AC *pAc) /* pointer to adapter context */
}
if (pNet != netdev_priv(pAC->dev[1])) {
pNet = netdev_priv(pAC->dev[1]);
- if (pNet->Up) {
+ if (netif_running(pAC->dev[1])) {
pAC->WasIfUp[1] = SK_TRUE;
pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
DoPrintInterfaceChange = SK_FALSE;
@@ -4815,6 +4776,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
struct net_device *dev = NULL;
static int boards_found = 0;
int error = -ENODEV;
+ char DeviceStr[80];
if (pci_enable_device(pdev))
goto out;
@@ -4842,14 +4804,11 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
memset(pNet->pAC, 0, sizeof(SK_AC));
pAC = pNet->pAC;
pAC->PciDev = pdev;
- pAC->PciDevId = pdev->device;
+
pAC->dev[0] = dev;
pAC->dev[1] = dev;
- sprintf(pAC->Name, "SysKonnect SK-98xx");
pAC->CheckQueue = SK_FALSE;
- pNet->Mtu = 1500;
- pNet->Up = 0;
dev->irq = pdev->irq;
error = SkGeInitPCI(pAC);
if (error) {
@@ -4872,21 +4831,30 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
-#ifdef SK_ZEROCOPY
-#ifdef USE_SK_TX_CHECKSUM
+ /* Use only if yukon hardware */
if (pAC->ChipsetType) {
- /* Use only if yukon hardware */
- /* SK and ZEROCOPY - fly baby... */
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
+#ifdef USE_SK_TX_CHECKSUM
+ dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+ dev->features |= NETIF_F_SG;
#endif
+#ifdef USE_SK_RX_CHECKSUM
+ pAC->RxPort[0].RxCsum = 1;
#endif
+ }
pAC->Index = boards_found++;
if (SkGeBoardInit(dev, pAC))
goto out_free_netdev;
+ /* Read Adapter name from VPD */
+ if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
+ printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
+ goto out_free_resources;
+ }
+
/* Register net device */
if (register_netdev(dev)) {
printk(KERN_ERR "sk98lin: Could not register device.\n");
@@ -4894,8 +4862,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
}
/* Print adapter specific string from vpd */
- ProductStr(pAC);
- printk("%s: %s\n", dev->name, pAC->DeviceStr);
+ printk("%s: %s\n", dev->name, DeviceStr);
/* Print configuration settings */
printk(" PrefPort:%c RlmtMode:%s\n",
@@ -4911,8 +4878,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- SkGeProcCreate(dev);
-
pNet->PortNr = 0;
pNet->NetNr = 0;
@@ -4931,8 +4896,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
pNet->PortNr = 1;
pNet->NetNr = 1;
pNet->pAC = pAC;
- pNet->Mtu = 1500;
- pNet->Up = 0;
dev->open = &SkGeOpen;
dev->stop = &SkGeClose;
@@ -4945,26 +4908,28 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
-#ifdef SK_ZEROCOPY
-#ifdef USE_SK_TX_CHECKSUM
if (pAC->ChipsetType) {
- /* SG and ZEROCOPY - fly baby... */
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
+#ifdef USE_SK_TX_CHECKSUM
+ dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+ dev->features |= NETIF_F_SG;
#endif
+#ifdef USE_SK_RX_CHECKSUM
+ pAC->RxPort[1].RxCsum = 1;
#endif
+ }
if (register_netdev(dev)) {
printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n");
free_netdev(dev);
pAC->dev[1] = pAC->dev[0];
} else {
- SkGeProcCreate(dev);
memcpy(&dev->dev_addr,
&pAC->Addr.Net[1].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- printk("%s: %s\n", dev->name, pAC->DeviceStr);
+ printk("%s: %s\n", dev->name, DeviceStr);
printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
}
}
@@ -5000,10 +4965,7 @@ static void __devexit skge_remove_one(struct pci_dev *pdev)
SK_AC *pAC = pNet->pAC;
struct net_device *otherdev = pAC->dev[1];
- SkGeProcRemove(dev);
unregister_netdev(dev);
- if (otherdev != dev)
- SkGeProcRemove(otherdev);
SkGeYellowLED(pAC, pAC->IoBase, 0);
@@ -5088,9 +5050,9 @@ static int skge_resume(struct pci_dev *pdev)
pci_enable_device(pdev);
pci_set_master(pdev);
if (pAC->GIni.GIMacsFound == 2)
- ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
else
- ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+ ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev);
if (ret) {
printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
pAC->AllocFlag &= ~SK_ALLOC_IRQ;
@@ -5148,23 +5110,12 @@ static struct pci_driver skge_driver = {
static int __init skge_init(void)
{
- int error;
-
- pSkRootDir = proc_mkdir(SKRootName, NULL);
- if (pSkRootDir)
- pSkRootDir->owner = THIS_MODULE;
-
- error = pci_register_driver(&skge_driver);
- if (error)
- remove_proc_entry(SKRootName, NULL);
- return error;
+ return pci_module_init(&skge_driver);
}
static void __exit skge_exit(void)
{
pci_unregister_driver(&skge_driver);
- remove_proc_entry(SKRootName, NULL);
-
}
module_init(skge_init);
diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c
deleted file mode 100644
index 5cece25c034..00000000000
--- a/drivers/net/sk98lin/skproc.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/******************************************************************************
- *
- * Name: skproc.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.11 $
- * Date: $Date: 2003/12/11 16:03:57 $
- * Purpose: Funktions to display statictic data
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Created 22-Nov-2000
- * Author: Mirko Lindner (mlindner@syskonnect.de)
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-#include "h/skversion.h"
-
-static int sk_seq_show(struct seq_file *seq, void *v);
-static int sk_proc_open(struct inode *inode, struct file *file);
-
-struct file_operations sk_proc_fops = {
- .owner = THIS_MODULE,
- .open = sk_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-
-/*****************************************************************************
- *
- * sk_seq_show - show proc information of a particular adapter
- *
- * Description:
- * This function fills the proc entry with statistic data about
- * the ethernet device. It invokes the generic sk_gen_browse() to
- * print out all items one per one.
- *
- * Returns: 0
- *
- */
-static int sk_seq_show(struct seq_file *seq, void *v)
-{
- struct net_device *dev = seq->private;
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
- SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct;
- unsigned long Flags;
- unsigned int Size;
- char sens_msg[50];
- int t;
- int i;
-
- /* NetIndex in GetStruct is now required, zero is only dummy */
- for (t=pAC->GIni.GIMacsFound; t > 0; t--) {
- if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 1)
- t--;
-
- spin_lock_irqsave(&pAC->SlowPathLock, Flags);
- Size = SK_PNMI_STRUCT_SIZE;
-#ifdef SK_DIAG_SUPPORT
- if (pAC->BoardLevel == SK_INIT_DATA) {
- SK_MEMCPY(&(pAC->PnmiStruct), &(pAC->PnmiBackup), sizeof(SK_PNMI_STRUCT_DATA));
- if (pAC->DiagModeActive == DIAG_NOTACTIVE) {
- pAC->Pnmi.DiagAttached = SK_DIAG_IDLE;
- }
- } else {
- SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, t-1);
- }
-#else
- SkPnmiGetStruct(pAC, pAC->IoBase,
- pPnmiStruct, &Size, t-1);
-#endif
- spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-
- if (pAC->dev[t-1] == dev) {
- SK_PNMI_STAT *pPnmiStat = &pPnmiStruct->Stat[0];
-
- seq_printf(seq, "\nDetailed statistic for device %s\n",
- pAC->dev[t-1]->name);
- seq_printf(seq, "=======================================\n");
-
- /* Board statistics */
- seq_printf(seq, "\nBoard statistics\n\n");
- seq_printf(seq, "Active Port %c\n",
- 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
- Net[t-1].PrefPort]->PortNumber);
- seq_printf(seq, "Preferred Port %c\n",
- 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
- Net[t-1].PrefPort]->PortNumber);
-
- seq_printf(seq, "Bus speed (MHz) %d\n",
- pPnmiStruct->BusSpeed);
-
- seq_printf(seq, "Bus width (Bit) %d\n",
- pPnmiStruct->BusWidth);
- seq_printf(seq, "Driver version %s\n",
- VER_STRING);
- seq_printf(seq, "Hardware revision v%d.%d\n",
- (pAC->GIni.GIPciHwRev >> 4) & 0x0F,
- pAC->GIni.GIPciHwRev & 0x0F);
-
- /* Print sensor informations */
- for (i=0; i < pAC->I2c.MaxSens; i ++) {
- /* Check type */
- switch (pAC->I2c.SenTable[i].SenType) {
- case 1:
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (C)");
- seq_printf(seq, "%-25s %d.%02d\n",
- sens_msg,
- pAC->I2c.SenTable[i].SenValue / 10,
- pAC->I2c.SenTable[i].SenValue % 10);
-
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (F)");
- seq_printf(seq, "%-25s %d.%02d\n",
- sens_msg,
- ((((pAC->I2c.SenTable[i].SenValue)
- *10)*9)/5 + 3200)/100,
- ((((pAC->I2c.SenTable[i].SenValue)
- *10)*9)/5 + 3200) % 10);
- break;
- case 2:
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (V)");
- seq_printf(seq, "%-25s %d.%03d\n",
- sens_msg,
- pAC->I2c.SenTable[i].SenValue / 1000,
- pAC->I2c.SenTable[i].SenValue % 1000);
- break;
- case 3:
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (rpm)");
- seq_printf(seq, "%-25s %d\n",
- sens_msg,
- pAC->I2c.SenTable[i].SenValue);
- break;
- default:
- break;
- }
- }
-
- /*Receive statistics */
- seq_printf(seq, "\nReceive statistics\n\n");
-
- seq_printf(seq, "Received bytes %Lu\n",
- (unsigned long long) pPnmiStat->StatRxOctetsOkCts);
- seq_printf(seq, "Received packets %Lu\n",
- (unsigned long long) pPnmiStat->StatRxOkCts);
-#if 0
- if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC &&
- pAC->HWRevision < 12) {
- pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
- pPnmiStat->StatRxShortsCts;
- pPnmiStat->StatRxShortsCts = 0;
- }
-#endif
- if (dev->mtu > 1500)
- pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
- pPnmiStat->StatRxTooLongCts;
-
- seq_printf(seq, "Receive errors %Lu\n",
- (unsigned long long) pPnmiStruct->InErrorsCts);
- seq_printf(seq, "Receive dropped %Lu\n",
- (unsigned long long) pPnmiStruct->RxNoBufCts);
- seq_printf(seq, "Received multicast %Lu\n",
- (unsigned long long) pPnmiStat->StatRxMulticastOkCts);
- seq_printf(seq, "Receive error types\n");
- seq_printf(seq, " length %Lu\n",
- (unsigned long long) pPnmiStat->StatRxRuntCts);
- seq_printf(seq, " buffer overflow %Lu\n",
- (unsigned long long) pPnmiStat->StatRxFifoOverflowCts);
- seq_printf(seq, " bad crc %Lu\n",
- (unsigned long long) pPnmiStat->StatRxFcsCts);
- seq_printf(seq, " framing %Lu\n",
- (unsigned long long) pPnmiStat->StatRxFramingCts);
- seq_printf(seq, " missed frames %Lu\n",
- (unsigned long long) pPnmiStat->StatRxMissedCts);
-
- if (dev->mtu > 1500)
- pPnmiStat->StatRxTooLongCts = 0;
-
- seq_printf(seq, " too long %Lu\n",
- (unsigned long long) pPnmiStat->StatRxTooLongCts);
- seq_printf(seq, " carrier extension %Lu\n",
- (unsigned long long) pPnmiStat->StatRxCextCts);
- seq_printf(seq, " too short %Lu\n",
- (unsigned long long) pPnmiStat->StatRxShortsCts);
- seq_printf(seq, " symbol %Lu\n",
- (unsigned long long) pPnmiStat->StatRxSymbolCts);
- seq_printf(seq, " LLC MAC size %Lu\n",
- (unsigned long long) pPnmiStat->StatRxIRLengthCts);
- seq_printf(seq, " carrier event %Lu\n",
- (unsigned long long) pPnmiStat->StatRxCarrierCts);
- seq_printf(seq, " jabber %Lu\n",
- (unsigned long long) pPnmiStat->StatRxJabberCts);
-
-
- /*Transmit statistics */
- seq_printf(seq, "\nTransmit statistics\n\n");
-
- seq_printf(seq, "Transmited bytes %Lu\n",
- (unsigned long long) pPnmiStat->StatTxOctetsOkCts);
- seq_printf(seq, "Transmited packets %Lu\n",
- (unsigned long long) pPnmiStat->StatTxOkCts);
- seq_printf(seq, "Transmit errors %Lu\n",
- (unsigned long long) pPnmiStat->StatTxSingleCollisionCts);
- seq_printf(seq, "Transmit dropped %Lu\n",
- (unsigned long long) pPnmiStruct->TxNoBufCts);
- seq_printf(seq, "Transmit collisions %Lu\n",
- (unsigned long long) pPnmiStat->StatTxSingleCollisionCts);
- seq_printf(seq, "Transmit error types\n");
- seq_printf(seq, " excessive collision %ld\n",
- pAC->stats.tx_aborted_errors);
- seq_printf(seq, " carrier %Lu\n",
- (unsigned long long) pPnmiStat->StatTxCarrierCts);
- seq_printf(seq, " fifo underrun %Lu\n",
- (unsigned long long) pPnmiStat->StatTxFifoUnderrunCts);
- seq_printf(seq, " heartbeat %Lu\n",
- (unsigned long long) pPnmiStat->StatTxCarrierCts);
- seq_printf(seq, " window %ld\n",
- pAC->stats.tx_window_errors);
-
- }
- }
- return 0;
-}
-
-/*****************************************************************************
- *
- * sk_proc_open - register the show function when proc is open'ed
- *
- * Description:
- * This function is called whenever a sk98lin proc file is queried.
- *
- * Returns: the return value of single_open()
- *
- */
-static int sk_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, sk_seq_show, PDE(inode)->data);
-}
-
-/*******************************************************************************
- *
- * End of file
- *
- ******************************************************************************/
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 00d683063c0..b538e303805 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -25,6 +25,7 @@
*/
#include <linux/config.h>
+#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -43,7 +44,7 @@
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "1.2"
+#define DRV_VERSION "1.3"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
@@ -88,15 +89,14 @@ MODULE_DEVICE_TABLE(pci, skge_id_table);
static int skge_up(struct net_device *dev);
static int skge_down(struct net_device *dev);
+static void skge_phy_reset(struct skge_port *skge);
static void skge_tx_clean(struct skge_port *skge);
static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
static void genesis_get_stats(struct skge_port *skge, u64 *data);
static void yukon_get_stats(struct skge_port *skge, u64 *data);
static void yukon_init(struct skge_hw *hw, int port);
-static void yukon_reset(struct skge_hw *hw, int port);
static void genesis_mac_init(struct skge_hw *hw, int port);
-static void genesis_reset(struct skge_hw *hw, int port);
static void genesis_link_up(struct skge_port *skge);
/* Avoid conditionals by using array */
@@ -276,10 +276,9 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
skge->autoneg = ecmd->autoneg;
skge->advertising = ecmd->advertising;
- if (netif_running(dev)) {
- skge_down(dev);
- skge_up(dev);
- }
+ if (netif_running(dev))
+ skge_phy_reset(skge);
+
return (0);
}
@@ -399,6 +398,7 @@ static int skge_set_ring_param(struct net_device *dev,
struct ethtool_ringparam *p)
{
struct skge_port *skge = netdev_priv(dev);
+ int err;
if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
@@ -409,7 +409,9 @@ static int skge_set_ring_param(struct net_device *dev,
if (netif_running(dev)) {
skge_down(dev);
- skge_up(dev);
+ err = skge_up(dev);
+ if (err)
+ dev_close(dev);
}
return 0;
@@ -430,21 +432,11 @@ static void skge_set_msglevel(struct net_device *netdev, u32 value)
static int skge_nway_reset(struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
- struct skge_hw *hw = skge->hw;
- int port = skge->port;
if (skge->autoneg != AUTONEG_ENABLE || !netif_running(dev))
return -EINVAL;
- spin_lock_bh(&hw->phy_lock);
- if (hw->chip_id == CHIP_ID_GENESIS) {
- genesis_reset(hw, port);
- genesis_mac_init(hw, port);
- } else {
- yukon_reset(hw, port);
- yukon_init(hw, port);
- }
- spin_unlock_bh(&hw->phy_lock);
+ skge_phy_reset(skge);
return 0;
}
@@ -516,10 +508,8 @@ static int skge_set_pauseparam(struct net_device *dev,
else
skge->flow_control = FLOW_MODE_NONE;
- if (netif_running(dev)) {
- skge_down(dev);
- skge_up(dev);
- }
+ if (netif_running(dev))
+ skge_phy_reset(skge);
return 0;
}
@@ -2019,6 +2009,25 @@ static void yukon_phy_intr(struct skge_port *skge)
/* XXX restart autonegotiation? */
}
+static void skge_phy_reset(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ netif_stop_queue(skge->netdev);
+ netif_carrier_off(skge->netdev);
+
+ spin_lock_bh(&hw->phy_lock);
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ genesis_reset(hw, port);
+ genesis_mac_init(hw, port);
+ } else {
+ yukon_reset(hw, port);
+ yukon_init(hw, port);
+ }
+ spin_unlock_bh(&hw->phy_lock);
+}
+
/* Basic MII support */
static int skge_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
@@ -2187,6 +2196,7 @@ static int skge_up(struct net_device *dev)
kfree(skge->rx_ring.start);
free_pci_mem:
pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma);
+ skge->mem = NULL;
return err;
}
@@ -2197,6 +2207,9 @@ static int skge_down(struct net_device *dev)
struct skge_hw *hw = skge->hw;
int port = skge->port;
+ if (skge->mem == NULL)
+ return 0;
+
if (netif_msg_ifdown(skge))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
@@ -2253,6 +2266,7 @@ static int skge_down(struct net_device *dev)
kfree(skge->rx_ring.start);
kfree(skge->tx_ring.start);
pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma);
+ skge->mem = NULL;
return 0;
}
@@ -2413,18 +2427,23 @@ static void skge_tx_timeout(struct net_device *dev)
static int skge_change_mtu(struct net_device *dev, int new_mtu)
{
- int err = 0;
- int running = netif_running(dev);
+ int err;
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
+ if (!netif_running(dev)) {
+ dev->mtu = new_mtu;
+ return 0;
+ }
+
+ skge_down(dev);
- if (running)
- skge_down(dev);
dev->mtu = new_mtu;
- if (running)
- skge_up(dev);
+
+ err = skge_up(dev);
+ if (err)
+ dev_close(dev);
return err;
}
@@ -3398,8 +3417,8 @@ static int skge_resume(struct pci_dev *pdev)
struct net_device *dev = hw->dev[i];
if (dev) {
netif_device_attach(dev);
- if (netif_running(dev))
- skge_up(dev);
+ if (netif_running(dev) && skge_up(dev))
+ dev_close(dev);
}
}
return 0;
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index ee123c15f54..2efdacc290e 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -475,18 +475,6 @@ enum {
Q_T2 = 0x40, /* 32 bit Test Register 2 */
Q_T3 = 0x44, /* 32 bit Test Register 3 */
-/* Yukon-2 */
- Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */
- Q_WM = 0x40, /* 16 bit FIFO Watermark */
- Q_AL = 0x42, /* 8 bit FIFO Alignment */
- Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */
- Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */
- Q_RP = 0x48, /* 8 bit FIFO Read Pointer */
- Q_RL = 0x4a, /* 8 bit FIFO Read Level */
- Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */
- Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */
- Q_WL = 0x4e, /* 8 bit FIFO Write Level */
- Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */
};
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
@@ -675,22 +663,16 @@ enum {
LED_OFF = 1<<0, /* switch LED off */
};
-/* Receive GMAC FIFO (YUKON and Yukon-2) */
+/* Receive GMAC FIFO (YUKON) */
enum {
RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */
RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */
RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */
RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */
RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */
- RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */
-
- RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */
RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */
-
RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */
-
RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */
-
RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */
};
@@ -855,48 +837,6 @@ enum {
GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */
};
-/* Status BMU Registers (Yukon-2 only)*/
-enum {
- STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */
- STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */
- /* 0x0e85 - 0x0e86: reserved */
- STAT_LIST_ADDR_LO = 0x0e88,/* 32 bit Status List Start Addr (low) */
- STAT_LIST_ADDR_HI = 0x0e8c,/* 32 bit Status List Start Addr (high) */
- STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */
- STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */
- STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */
- STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */
- STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */
- STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */
-
-/* FIFO Control/Status Registers (Yukon-2 only)*/
- STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */
- STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */
- STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */
- STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */
- STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */
- STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */
- STAT_FIFO_ISR_WM = 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */
-
-/* Level and ISR Timer Registers (Yukon-2 only)*/
- STAT_LEV_TIMER_INI = 0x0eb0,/* 32 bit Level Timer Init. Value Reg */
- STAT_LEV_TIMER_CNT = 0x0eb4,/* 32 bit Level Timer Counter Reg */
- STAT_LEV_TIMER_CTRL = 0x0eb8,/* 8 bit Level Timer Control Reg */
- STAT_LEV_TIMER_TEST = 0x0eb9,/* 8 bit Level Timer Test Reg */
- STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */
- STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */
- STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */
- STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */
- STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */
- STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */
- STAT_ISR_TIMER_CTRL = 0x0ed8,/* 8 bit ISR Timer Control Reg */
- STAT_ISR_TIMER_TEST = 0x0ed9,/* 8 bit ISR Timer Test Reg */
-
- ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */
- ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */
- ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */
- ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */
-};
enum {
LINKLED_OFF = 0x01,
@@ -923,8 +863,6 @@ enum {
WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */
WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */
WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */
- WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */
- WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */
WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */
/* WOL Pattern Length Registers (YUKON only) */
@@ -1641,15 +1579,6 @@ enum {
PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */
};
-/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
-/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/
-enum {
- PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */
- PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */
- PHY_M_MAC_MD_COPPER = 5,/* Copper only */
- PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */
-};
-#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK)
/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/
enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
new file mode 100644
index 00000000000..f5d697c0c03
--- /dev/null
+++ b/drivers/net/sky2.c
@@ -0,0 +1,3262 @@
+/*
+ * New driver for Marvell Yukon 2 chipset.
+ * Based on earlier sk98lin, and skge driver.
+ *
+ * This driver intentionally does not support all the features
+ * of the original driver such as link fail-over and link management because
+ * those should be done at higher levels.
+ *
+ * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * TOTEST
+ * - speed setting
+ * - suspend/resume
+ */
+
+#include <linux/config.h>
+#include <linux/crc32.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/if_vlan.h>
+#include <linux/prefetch.h>
+#include <linux/mii.h>
+
+#include <asm/irq.h>
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define SKY2_VLAN_TAG_USED 1
+#endif
+
+#include "sky2.h"
+
+#define DRV_NAME "sky2"
+#define DRV_VERSION "0.11"
+#define PFX DRV_NAME " "
+
+/*
+ * The Yukon II chipset takes 64 bit command blocks (called list elements)
+ * that are organized into three (receive, transmit, status) different rings
+ * similar to Tigon3. A transmit can require several elements;
+ * a receive requires one (or two if using 64 bit dma).
+ */
+
+#define is_ec_a1(hw) \
+ unlikely((hw)->chip_id == CHIP_ID_YUKON_EC && \
+ (hw)->chip_rev == CHIP_REV_YU_EC_A1)
+
+#define RX_LE_SIZE 512
+#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
+#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2)
+#define RX_DEF_PENDING RX_MAX_PENDING
+
+#define TX_RING_SIZE 512
+#define TX_DEF_PENDING (TX_RING_SIZE - 1)
+#define TX_MIN_PENDING 64
+#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS)
+
+#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
+#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
+#define ETH_JUMBO_MTU 9000
+#define TX_WATCHDOG (5 * HZ)
+#define NAPI_WEIGHT 64
+#define PHY_RETRIES 1000
+
+static const u32 default_msg =
+ NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
+ | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
+ | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_INTR;
+
+static int debug = -1; /* defaults above */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+static int copybreak __read_mostly = 256;
+module_param(copybreak, int, 0);
+MODULE_PARM_DESC(copybreak, "Receive copy threshold");
+
+static const struct pci_device_id sky2_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, sky2_id_table);
+
+/* Avoid conditionals by using array */
+static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
+static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
+
+/* This driver supports yukon2 chipset only */
+static const char *yukon2_name[] = {
+ "XL", /* 0xb3 */
+ "EC Ultra", /* 0xb4 */
+ "UNKNOWN", /* 0xb5 */
+ "EC", /* 0xb6 */
+ "FE", /* 0xb7 */
+};
+
+/* Access to external PHY */
+static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
+{
+ int i;
+
+ gma_write16(hw, port, GM_SMI_DATA, val);
+ gma_write16(hw, port, GM_SMI_CTRL,
+ GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
+
+ for (i = 0; i < PHY_RETRIES; i++) {
+ if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
+ return -ETIMEDOUT;
+}
+
+static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
+{
+ int i;
+
+ gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
+ | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
+
+ for (i = 0; i < PHY_RETRIES; i++) {
+ if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
+ *val = gma_read16(hw, port, GM_SMI_DATA);
+ return 0;
+ }
+
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+{
+ u16 v;
+
+ if (__gm_phy_read(hw, port, reg, &v) != 0)
+ printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
+ return v;
+}
+
+static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
+{
+ u16 power_control;
+ u32 reg1;
+ int vaux;
+ int ret = 0;
+
+ pr_debug("sky2_set_power_state %d\n", state);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
+ pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
+ vaux = (sky2_read8(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
+ (power_control & PCI_PM_CAP_PME_D3cold);
+
+ pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
+
+ power_control |= PCI_PM_CTRL_PME_STATUS;
+ power_control &= ~(PCI_PM_CTRL_STATE_MASK);
+
+ switch (state) {
+ case PCI_D0:
+ /* switch power to VCC (WA for VAUX problem) */
+ sky2_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
+
+ /* disable Core Clock Division, */
+ sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+ else
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+
+ /* Turn off phy power saving */
+ pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+ reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
+
+ /* looks like this XL is back asswards .. */
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) {
+ reg1 |= PCI_Y2_PHY1_COMA;
+ if (hw->ports > 1)
+ reg1 |= PCI_Y2_PHY2_COMA;
+ }
+ pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+ break;
+
+ case PCI_D3hot:
+ case PCI_D3cold:
+ /* Turn on phy power saving */
+ pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
+ else
+ reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
+ pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+ else
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+
+ /* switch power to VAUX */
+ if (vaux && state != PCI_D3cold)
+ sky2_write8(hw, B0_POWER_CTRL,
+ (PC_VAUX_ENA | PC_VCC_ENA |
+ PC_VAUX_ON | PC_VCC_OFF));
+ break;
+ default:
+ printk(KERN_ERR PFX "Unknown power state %d\n", state);
+ ret = -1;
+ }
+
+ pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ return ret;
+}
+
+static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
+{
+ u16 reg;
+
+ /* disable all GMAC IRQ's */
+ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
+ /* disable PHY IRQs */
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
+
+ gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
+ gma_write16(hw, port, GM_MC_ADDR_H2, 0);
+ gma_write16(hw, port, GM_MC_ADDR_H3, 0);
+ gma_write16(hw, port, GM_MC_ADDR_H4, 0);
+
+ reg = gma_read16(hw, port, GM_RX_CTRL);
+ reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
+ gma_write16(hw, port, GM_RX_CTRL, reg);
+}
+
+static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
+{
+ struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
+ u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
+
+ if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) {
+ u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
+
+ ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
+ PHY_M_EC_MAC_S_MSK);
+ ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC)
+ ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
+ else
+ ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3);
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
+ }
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ if (hw->copper) {
+ if (hw->chip_id == CHIP_ID_YUKON_FE) {
+ /* enable automatic crossover */
+ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
+ } else {
+ /* disable energy detect */
+ ctrl &= ~PHY_M_PC_EN_DET_MSK;
+
+ /* enable automatic crossover */
+ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
+
+ if (sky2->autoneg == AUTONEG_ENABLE &&
+ hw->chip_id == CHIP_ID_YUKON_XL) {
+ ctrl &= ~PHY_M_PC_DSC_MSK;
+ ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
+ }
+ }
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+ } else {
+ /* workaround for deviation #4.88 (CRC errors) */
+ /* disable Automatic Crossover */
+
+ ctrl &= ~PHY_M_PC_MDIX_MSK;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl &= ~PHY_M_MAC_MD_MSK;
+ ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* select page 1 to access Fiber registers */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
+ }
+ }
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL);
+ if (sky2->autoneg == AUTONEG_DISABLE)
+ ctrl &= ~PHY_CT_ANE;
+ else
+ ctrl |= PHY_CT_ANE;
+
+ ctrl |= PHY_CT_RESET;
+ gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+
+ ctrl = 0;
+ ct1000 = 0;
+ adv = PHY_AN_CSMA;
+
+ if (sky2->autoneg == AUTONEG_ENABLE) {
+ if (hw->copper) {
+ if (sky2->advertising & ADVERTISED_1000baseT_Full)
+ ct1000 |= PHY_M_1000C_AFD;
+ if (sky2->advertising & ADVERTISED_1000baseT_Half)
+ ct1000 |= PHY_M_1000C_AHD;
+ if (sky2->advertising & ADVERTISED_100baseT_Full)
+ adv |= PHY_M_AN_100_FD;
+ if (sky2->advertising & ADVERTISED_100baseT_Half)
+ adv |= PHY_M_AN_100_HD;
+ if (sky2->advertising & ADVERTISED_10baseT_Full)
+ adv |= PHY_M_AN_10_FD;
+ if (sky2->advertising & ADVERTISED_10baseT_Half)
+ adv |= PHY_M_AN_10_HD;
+ } else /* special defines for FIBER (88E1011S only) */
+ adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
+
+ /* Set Flow-control capabilities */
+ if (sky2->tx_pause && sky2->rx_pause)
+ adv |= PHY_AN_PAUSE_CAP; /* symmetric */
+ else if (sky2->rx_pause && !sky2->tx_pause)
+ adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP;
+ else if (!sky2->rx_pause && sky2->tx_pause)
+ adv |= PHY_AN_PAUSE_ASYM; /* local */
+
+ /* Restart Auto-negotiation */
+ ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
+ } else {
+ /* forced speed/duplex settings */
+ ct1000 = PHY_M_1000C_MSE;
+
+ if (sky2->duplex == DUPLEX_FULL)
+ ctrl |= PHY_CT_DUP_MD;
+
+ switch (sky2->speed) {
+ case SPEED_1000:
+ ctrl |= PHY_CT_SP1000;
+ break;
+ case SPEED_100:
+ ctrl |= PHY_CT_SP100;
+ break;
+ }
+
+ ctrl |= PHY_CT_RESET;
+ }
+
+ if (hw->chip_id != CHIP_ID_YUKON_FE)
+ gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
+
+ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
+ gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+
+ /* Setup Phy LED's */
+ ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
+ ledover = 0;
+
+ switch (hw->chip_id) {
+ case CHIP_ID_YUKON_FE:
+ /* on 88E3082 these bits are at 11..9 (shifted left) */
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
+
+ /* delete ACT LED control bits */
+ ctrl &= ~PHY_M_FELP_LED1_MSK;
+ /* change ACT LED control to blink mode */
+ ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
+ gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
+ break;
+
+ case CHIP_ID_YUKON_XL:
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ /* select page 3 to access LED control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+ /* set LED Function Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
+
+ /* set Polarity Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
+ (PHY_M_POLC_LS1_P_MIX(4) |
+ PHY_M_POLC_IS0_P_MIX(4) |
+ PHY_M_POLC_LOS_CTRL(2) |
+ PHY_M_POLC_INIT_CTRL(2) |
+ PHY_M_POLC_STA1_CTRL(2) |
+ PHY_M_POLC_STA0_CTRL(2)));
+
+ /* restore page register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ break;
+
+ default:
+ /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+ /* turn off the Rx LED (LED_RX) */
+ ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
+ }
+
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+
+ if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+ /* turn on 100 Mbps LED (LED_LINK100) */
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ }
+
+ if (ledover)
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
+ /* Enable phy interrupt on auto-negotiation complete (or link up) */
+ if (sky2->autoneg == AUTONEG_ENABLE)
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+ else
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+}
+
+/* Force a renegotiation */
+static void sky2_phy_reinit(struct sky2_port *sky2)
+{
+ down(&sky2->phy_sema);
+ sky2_phy_init(sky2->hw, sky2->port);
+ up(&sky2->phy_sema);
+}
+
+static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
+{
+ struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
+ u16 reg;
+ int i;
+ const u8 *addr = hw->dev[port]->dev_addr;
+
+ sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+ sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE);
+
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) {
+ /* WA DEV_472 -- looks like crossed wires on port 2 */
+ /* clear GMAC 1 Control reset */
+ sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
+ do {
+ sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
+ sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
+ } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
+ gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
+ gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
+ }
+
+ if (sky2->autoneg == AUTONEG_DISABLE) {
+ reg = gma_read16(hw, port, GM_GP_CTRL);
+ reg |= GM_GPCR_AU_ALL_DIS;
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+ gma_read16(hw, port, GM_GP_CTRL);
+
+ switch (sky2->speed) {
+ case SPEED_1000:
+ reg |= GM_GPCR_SPEED_1000;
+ /* fallthru */
+ case SPEED_100:
+ reg |= GM_GPCR_SPEED_100;
+ }
+
+ if (sky2->duplex == DUPLEX_FULL)
+ reg |= GM_GPCR_DUP_FULL;
+ } else
+ reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
+
+ if (!sky2->tx_pause && !sky2->rx_pause) {
+ sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+ reg |=
+ GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+ } else if (sky2->tx_pause && !sky2->rx_pause) {
+ /* disable Rx flow-control */
+ reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+ }
+
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+
+ sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
+
+ down(&sky2->phy_sema);
+ sky2_phy_init(hw, port);
+ up(&sky2->phy_sema);
+
+ /* MIB clear */
+ reg = gma_read16(hw, port, GM_PHY_ADDR);
+ gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
+
+ for (i = 0; i < GM_MIB_CNT_SIZE; i++)
+ gma_read16(hw, port, GM_MIB_CNT_BASE + 8 * i);
+ gma_write16(hw, port, GM_PHY_ADDR, reg);
+
+ /* transmit control */
+ gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
+
+ /* receive control reg: unicast + multicast + no FCS */
+ gma_write16(hw, port, GM_RX_CTRL,
+ GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
+
+ /* transmit flow control */
+ gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
+
+ /* transmit parameter */
+ gma_write16(hw, port, GM_TX_PARAM,
+ TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
+ TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
+ TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
+ TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
+
+ /* serial mode register */
+ reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
+ GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
+
+ if (hw->dev[port]->mtu > ETH_DATA_LEN)
+ reg |= GM_SMOD_JUMBO_ENA;
+
+ gma_write16(hw, port, GM_SERIAL_MODE, reg);
+
+ /* virtual address for data */
+ gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
+
+ /* physical address: used for pause frames */
+ gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
+
+ /* ignore counter overflows */
+ gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
+ gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
+
+ /* Configure Rx MAC FIFO */
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
+ sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
+ GMF_RX_CTRL_DEF);
+
+ /* Flush Rx MAC FIFO on any flow control or error */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+
+ /* Set threshold to 0xa (64 bytes)
+ * ASF disabled so no need to do WA dev #4.30
+ */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+
+ /* Configure Tx MAC FIFO */
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
+ sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
+ sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
+ if (hw->dev[port]->mtu > ETH_DATA_LEN) {
+ /* set Tx GMAC FIFO Almost Empty Threshold */
+ sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180);
+ /* Disable Store & Forward mode for TX */
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
+ }
+ }
+
+}
+
+static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len)
+{
+ u32 end;
+
+ start /= 8;
+ len /= 8;
+ end = start + len - 1;
+
+ sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
+ sky2_write32(hw, RB_ADDR(q, RB_START), start);
+ sky2_write32(hw, RB_ADDR(q, RB_END), end);
+ sky2_write32(hw, RB_ADDR(q, RB_WP), start);
+ sky2_write32(hw, RB_ADDR(q, RB_RP), start);
+
+ if (q == Q_R1 || q == Q_R2) {
+ u32 rxup, rxlo;
+
+ rxlo = len/2;
+ rxup = rxlo + len/4;
+
+ /* Set thresholds on receive queue's */
+ sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), rxup);
+ sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), rxlo);
+ } else {
+ /* Enable store & forward on Tx queue's because
+ * Tx FIFO is only 1K on Yukon
+ */
+ sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
+ }
+
+ sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
+ sky2_read8(hw, RB_ADDR(q, RB_CTRL));
+}
+
+/* Setup Bus Memory Interface */
+static void sky2_qset(struct sky2_hw *hw, u16 q)
+{
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
+ sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
+}
+
+/* Setup prefetch unit registers. This is the interface between
+ * hardware and driver list elements
+ */
+static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
+ u64 addr, u32 last)
+{
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
+ sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
+
+ sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
+}
+
+static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
+{
+ struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
+
+ sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE;
+ return le;
+}
+
+/*
+ * This is a workaround code taken from SysKonnect sk98lin driver
+ * to deal with chip bug on Yukon EC rev 0 in the wraparound case.
+ */
+static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q,
+ u16 idx, u16 *last, u16 size)
+{
+ if (is_ec_a1(hw) && idx < *last) {
+ u16 hwget = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
+
+ if (hwget == 0) {
+ /* Start prefetching again */
+ sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 0xe0);
+ goto setnew;
+ }
+
+ if (hwget == size - 1) {
+ /* set watermark to one list element */
+ sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 8);
+
+ /* set put index to first list element */
+ sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), 0);
+ } else /* have hardware go to end of list */
+ sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX),
+ size - 1);
+ } else {
+setnew:
+ sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
+ }
+ *last = idx;
+}
+
+
+static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
+{
+ struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
+ sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE;
+ return le;
+}
+
+/* Return high part of DMA address (could be 32 or 64 bit) */
+static inline u32 high32(dma_addr_t a)
+{
+ return (a >> 16) >> 16;
+}
+
+/* Build description to hardware about buffer */
+static inline void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map)
+{
+ struct sky2_rx_le *le;
+ u32 hi = high32(map);
+ u16 len = sky2->rx_bufsize;
+
+ if (sky2->rx_addr64 != hi) {
+ le = sky2_next_rx(sky2);
+ le->addr = cpu_to_le32(hi);
+ le->ctrl = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ sky2->rx_addr64 = high32(map + len);
+ }
+
+ le = sky2_next_rx(sky2);
+ le->addr = cpu_to_le32((u32) map);
+ le->length = cpu_to_le16(len);
+ le->ctrl = 0;
+ le->opcode = OP_PACKET | HW_OWNER;
+}
+
+
+/* Tell chip where to start receive checksum.
+ * Actually has two checksums, but set both same to avoid possible byte
+ * order problems.
+ */
+static void rx_set_checksum(struct sky2_port *sky2)
+{
+ struct sky2_rx_le *le;
+
+ le = sky2_next_rx(sky2);
+ le->addr = (ETH_HLEN << 16) | ETH_HLEN;
+ le->ctrl = 0;
+ le->opcode = OP_TCPSTART | HW_OWNER;
+
+ sky2_write32(sky2->hw,
+ Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+
+}
+
+/*
+ * The RX Stop command will not work for Yukon-2 if the BMU does not
+ * reach the end of packet and since we can't make sure that we have
+ * incoming data, we must reset the BMU while it is not doing a DMA
+ * transfer. Since it is possible that the RX path is still active,
+ * the RX RAM buffer will be stopped first, so any possible incoming
+ * data will not trigger a DMA. After the RAM buffer is stopped, the
+ * BMU is polled until any DMA in progress is ended and only then it
+ * will be reset.
+ */
+static void sky2_rx_stop(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned rxq = rxqaddr[sky2->port];
+ int i;
+
+ /* disable the RAM Buffer receive queue */
+ sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
+
+ for (i = 0; i < 0xffff; i++)
+ if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
+ == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
+ goto stopped;
+
+ printk(KERN_WARNING PFX "%s: receiver stop failed\n",
+ sky2->netdev->name);
+stopped:
+ sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
+
+ /* reset the Rx prefetch unit */
+ sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+}
+
+/* Clean out receive buffer area, assumes receiver hardware stopped */
+static void sky2_rx_clean(struct sky2_port *sky2)
+{
+ unsigned i;
+
+ memset(sky2->rx_le, 0, RX_LE_BYTES);
+ for (i = 0; i < sky2->rx_pending; i++) {
+ struct ring_info *re = sky2->rx_ring + i;
+
+ if (re->skb) {
+ pci_unmap_single(sky2->hw->pdev,
+ re->mapaddr, sky2->rx_bufsize,
+ PCI_DMA_FROMDEVICE);
+ kfree_skb(re->skb);
+ re->skb = NULL;
+ }
+ }
+}
+
+/* Basic MII support */
+static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = if_mii(ifr);
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ int err = -EOPNOTSUPP;
+
+ if (!netif_running(dev))
+ return -ENODEV; /* Phy still in reset */
+
+ switch(cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = PHY_ADDR_MARV;
+
+ /* fallthru */
+ case SIOCGMIIREG: {
+ u16 val = 0;
+
+ down(&sky2->phy_sema);
+ err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
+ up(&sky2->phy_sema);
+
+ data->val_out = val;
+ break;
+ }
+
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ down(&sky2->phy_sema);
+ err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
+ data->val_in);
+ up(&sky2->phy_sema);
+ break;
+ }
+ return err;
+}
+
+#ifdef SKY2_VLAN_TAG_USED
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ spin_lock(&sky2->tx_lock);
+
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON);
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON);
+ sky2->vlgrp = grp;
+
+ spin_unlock(&sky2->tx_lock);
+}
+
+static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ spin_lock(&sky2->tx_lock);
+
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
+ if (sky2->vlgrp)
+ sky2->vlgrp->vlan_devices[vid] = NULL;
+
+ spin_unlock(&sky2->tx_lock);
+}
+#endif
+
+/*
+ * Allocate and setup receiver buffer pool.
+ * In case of 64 bit dma, there are 2X as many list elements
+ * available as ring entries
+ * and need to reserve one list element so we don't wrap around.
+ *
+ * It appears the hardware has a bug in the FIFO logic that
+ * cause it to hang if the FIFO gets overrun and the receive buffer
+ * is not aligned. This means we can't use skb_reserve to align
+ * the IP header.
+ */
+static int sky2_rx_start(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned rxq = rxqaddr[sky2->port];
+ int i;
+
+ sky2->rx_put = sky2->rx_next = 0;
+ sky2_qset(hw, rxq);
+ sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
+
+ rx_set_checksum(sky2);
+ for (i = 0; i < sky2->rx_pending; i++) {
+ struct ring_info *re = sky2->rx_ring + i;
+
+ re->skb = dev_alloc_skb(sky2->rx_bufsize);
+ if (!re->skb)
+ goto nomem;
+
+ re->mapaddr = pci_map_single(hw->pdev, re->skb->data,
+ sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
+ sky2_rx_add(sky2, re->mapaddr);
+ }
+
+ /* Tell chip about available buffers */
+ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
+ sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX));
+ return 0;
+nomem:
+ sky2_rx_clean(sky2);
+ return -ENOMEM;
+}
+
+/* Bring up network interface. */
+static int sky2_up(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u32 ramsize, rxspace;
+ int err = -ENOMEM;
+
+ if (netif_msg_ifup(sky2))
+ printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+
+ /* must be power of 2 */
+ sky2->tx_le = pci_alloc_consistent(hw->pdev,
+ TX_RING_SIZE *
+ sizeof(struct sky2_tx_le),
+ &sky2->tx_le_map);
+ if (!sky2->tx_le)
+ goto err_out;
+
+ sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
+ GFP_KERNEL);
+ if (!sky2->tx_ring)
+ goto err_out;
+ sky2->tx_prod = sky2->tx_cons = 0;
+
+ sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
+ &sky2->rx_le_map);
+ if (!sky2->rx_le)
+ goto err_out;
+ memset(sky2->rx_le, 0, RX_LE_BYTES);
+
+ sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info),
+ GFP_KERNEL);
+ if (!sky2->rx_ring)
+ goto err_out;
+
+ sky2_mac_init(hw, port);
+
+ /* Configure RAM buffers */
+ if (hw->chip_id == CHIP_ID_YUKON_FE ||
+ (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == 2))
+ ramsize = 4096;
+ else {
+ u8 e0 = sky2_read8(hw, B2_E_0);
+ ramsize = (e0 == 0) ? (128 * 1024) : (e0 * 4096);
+ }
+
+ /* 2/3 for Rx */
+ rxspace = (2 * ramsize) / 3;
+ sky2_ramset(hw, rxqaddr[port], 0, rxspace);
+ sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
+
+ /* Make sure SyncQ is disabled */
+ sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
+ RB_RST_SET);
+
+ sky2_qset(hw, txqaddr[port]);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+ sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
+
+
+ sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
+ TX_RING_SIZE - 1);
+
+ err = sky2_rx_start(sky2);
+ if (err)
+ goto err_out;
+
+ /* Enable interrupts from phy/mac for port */
+ hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ return 0;
+
+err_out:
+ if (sky2->rx_le) {
+ pci_free_consistent(hw->pdev, RX_LE_BYTES,
+ sky2->rx_le, sky2->rx_le_map);
+ sky2->rx_le = NULL;
+ }
+ if (sky2->tx_le) {
+ pci_free_consistent(hw->pdev,
+ TX_RING_SIZE * sizeof(struct sky2_tx_le),
+ sky2->tx_le, sky2->tx_le_map);
+ sky2->tx_le = NULL;
+ }
+ kfree(sky2->tx_ring);
+ kfree(sky2->rx_ring);
+
+ sky2->tx_ring = NULL;
+ sky2->rx_ring = NULL;
+ return err;
+}
+
+/* Modular subtraction in ring */
+static inline int tx_dist(unsigned tail, unsigned head)
+{
+ return (head - tail) % TX_RING_SIZE;
+}
+
+/* Number of list elements available for next tx */
+static inline int tx_avail(const struct sky2_port *sky2)
+{
+ return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
+}
+
+/* Estimate of number of transmit list elements required */
+static inline unsigned tx_le_req(const struct sk_buff *skb)
+{
+ unsigned count;
+
+ count = sizeof(dma_addr_t) / sizeof(u32);
+ count += skb_shinfo(skb)->nr_frags * count;
+
+ if (skb_shinfo(skb)->tso_size)
+ ++count;
+
+ if (skb->ip_summed == CHECKSUM_HW)
+ ++count;
+
+ return count;
+}
+
+/*
+ * Put one packet in ring for transmit.
+ * A single packet can generate multiple list elements, and
+ * the number of ring elements will probably be less than the number
+ * of list elements used.
+ *
+ * No BH disabling for tx_lock here (like tg3)
+ */
+static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ struct sky2_tx_le *le = NULL;
+ struct tx_ring_info *re;
+ unsigned i, len;
+ dma_addr_t mapping;
+ u32 addr64;
+ u16 mss;
+ u8 ctrl;
+
+ if (!spin_trylock(&sky2->tx_lock))
+ return NETDEV_TX_LOCKED;
+
+ if (unlikely(tx_avail(sky2) < tx_le_req(skb))) {
+ /* There is a known but harmless race with lockless tx
+ * and netif_stop_queue.
+ */
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
+ printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
+ dev->name);
+ }
+ spin_unlock(&sky2->tx_lock);
+
+ return NETDEV_TX_BUSY;
+ }
+
+ if (unlikely(netif_msg_tx_queued(sky2)))
+ printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
+ dev->name, sky2->tx_prod, skb->len);
+
+ len = skb_headlen(skb);
+ mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
+ addr64 = high32(mapping);
+
+ re = sky2->tx_ring + sky2->tx_prod;
+
+ /* Send high bits if changed or crosses boundary */
+ if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
+ le = get_tx_le(sky2);
+ le->tx.addr = cpu_to_le32(addr64);
+ le->ctrl = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ sky2->tx_addr64 = high32(mapping + len);
+ }
+
+ /* Check for TCP Segmentation Offload */
+ mss = skb_shinfo(skb)->tso_size;
+ if (mss != 0) {
+ /* just drop the packet if non-linear expansion fails */
+ if (skb_header_cloned(skb) &&
+ pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
+ dev_kfree_skb_any(skb);
+ goto out_unlock;
+ }
+
+ mss += ((skb->h.th->doff - 5) * 4); /* TCP options */
+ mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
+ mss += ETH_HLEN;
+ }
+
+ if (mss != sky2->tx_last_mss) {
+ le = get_tx_le(sky2);
+ le->tx.tso.size = cpu_to_le16(mss);
+ le->tx.tso.rsvd = 0;
+ le->opcode = OP_LRGLEN | HW_OWNER;
+ le->ctrl = 0;
+ sky2->tx_last_mss = mss;
+ }
+
+ ctrl = 0;
+#ifdef SKY2_VLAN_TAG_USED
+ /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
+ if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
+ if (!le) {
+ le = get_tx_le(sky2);
+ le->tx.addr = 0;
+ le->opcode = OP_VLAN|HW_OWNER;
+ le->ctrl = 0;
+ } else
+ le->opcode |= OP_VLAN;
+ le->length = cpu_to_be16(vlan_tx_tag_get(skb));
+ ctrl |= INS_VLAN;
+ }
+#endif
+
+ /* Handle TCP checksum offload */
+ if (skb->ip_summed == CHECKSUM_HW) {
+ u16 hdr = skb->h.raw - skb->data;
+ u16 offset = hdr + skb->csum;
+
+ ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
+ if (skb->nh.iph->protocol == IPPROTO_UDP)
+ ctrl |= UDPTCP;
+
+ le = get_tx_le(sky2);
+ le->tx.csum.start = cpu_to_le16(hdr);
+ le->tx.csum.offset = cpu_to_le16(offset);
+ le->length = 0; /* initial checksum value */
+ le->ctrl = 1; /* one packet */
+ le->opcode = OP_TCPLISW | HW_OWNER;
+ }
+
+ le = get_tx_le(sky2);
+ le->tx.addr = cpu_to_le32((u32) mapping);
+ le->length = cpu_to_le16(len);
+ le->ctrl = ctrl;
+ le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
+
+ /* Record the transmit mapping info */
+ re->skb = skb;
+ pci_unmap_addr_set(re, mapaddr, mapping);
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ struct tx_ring_info *fre;
+
+ mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
+ frag->size, PCI_DMA_TODEVICE);
+ addr64 = (mapping >> 16) >> 16;
+ if (addr64 != sky2->tx_addr64) {
+ le = get_tx_le(sky2);
+ le->tx.addr = cpu_to_le32(addr64);
+ le->ctrl = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ sky2->tx_addr64 = addr64;
+ }
+
+ le = get_tx_le(sky2);
+ le->tx.addr = cpu_to_le32((u32) mapping);
+ le->length = cpu_to_le16(frag->size);
+ le->ctrl = ctrl;
+ le->opcode = OP_BUFFER | HW_OWNER;
+
+ fre = sky2->tx_ring
+ + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE;
+ pci_unmap_addr_set(fre, mapaddr, mapping);
+ }
+
+ re->idx = sky2->tx_prod;
+ le->ctrl |= EOP;
+
+ sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod,
+ &sky2->tx_last_put, TX_RING_SIZE);
+
+ if (tx_avail(sky2) <= MAX_SKB_TX_LE)
+ netif_stop_queue(dev);
+
+out_unlock:
+ mmiowb();
+ spin_unlock(&sky2->tx_lock);
+
+ dev->trans_start = jiffies;
+ return NETDEV_TX_OK;
+}
+
+/*
+ * Free ring elements from starting at tx_cons until "done"
+ *
+ * NB: the hardware will tell us about partial completion of multi-part
+ * buffers; these are deferred until completion.
+ */
+static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
+{
+ struct net_device *dev = sky2->netdev;
+ struct pci_dev *pdev = sky2->hw->pdev;
+ u16 nxt, put;
+ unsigned i;
+
+ BUG_ON(done >= TX_RING_SIZE);
+
+ if (unlikely(netif_msg_tx_done(sky2)))
+ printk(KERN_DEBUG "%s: tx done, up to %u\n",
+ dev->name, done);
+
+ for (put = sky2->tx_cons; put != done; put = nxt) {
+ struct tx_ring_info *re = sky2->tx_ring + put;
+ struct sk_buff *skb = re->skb;
+
+ nxt = re->idx;
+ BUG_ON(nxt >= TX_RING_SIZE);
+ prefetch(sky2->tx_ring + nxt);
+
+ /* Check for partial status */
+ if (tx_dist(put, done) < tx_dist(put, nxt))
+ break;
+
+ skb = re->skb;
+ pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
+ skb_headlen(skb), PCI_DMA_TODEVICE);
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ struct tx_ring_info *fre;
+ fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE;
+ pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
+ skb_shinfo(skb)->frags[i].size,
+ PCI_DMA_TODEVICE);
+ }
+
+ dev_kfree_skb_any(skb);
+ }
+
+ spin_lock(&sky2->tx_lock);
+ sky2->tx_cons = put;
+ if (netif_queue_stopped(dev) && tx_avail(sky2) > MAX_SKB_TX_LE)
+ netif_wake_queue(dev);
+ spin_unlock(&sky2->tx_lock);
+}
+
+/* Cleanup all untransmitted buffers, assume transmitter not running */
+static void sky2_tx_clean(struct sky2_port *sky2)
+{
+ sky2_tx_complete(sky2, sky2->tx_prod);
+}
+
+/* Network shutdown */
+static int sky2_down(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 ctrl;
+
+ /* Never really got started! */
+ if (!sky2->tx_le)
+ return 0;
+
+ if (netif_msg_ifdown(sky2))
+ printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+
+ /* Stop more packets from being queued */
+ netif_stop_queue(dev);
+
+ /* Disable port IRQ */
+ local_irq_disable();
+ hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ local_irq_enable();
+
+ flush_scheduled_work();
+
+ sky2_phy_reset(hw, port);
+
+ /* Stop transmitter */
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
+ sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
+
+ sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
+ RB_RST_SET | RB_DIS_OP_MD);
+
+ ctrl = gma_read16(hw, port, GM_GP_CTRL);
+ ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
+ gma_write16(hw, port, GM_GP_CTRL, ctrl);
+
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+
+ /* Workaround shared GMAC reset */
+ if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
+ && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
+
+ /* Disable Force Sync bit and Enable Alloc bit */
+ sky2_write8(hw, SK_REG(port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
+ sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
+
+ /* Reset the PCI FIFO of the async Tx queue */
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
+ BMU_RST_SET | BMU_FIFO_RST);
+
+ /* Reset the Tx prefetch units */
+ sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
+ PREF_UNIT_RST_SET);
+
+ sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
+
+ sky2_rx_stop(sky2);
+
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+
+ /* turn off LED's */
+ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
+
+ synchronize_irq(hw->pdev->irq);
+
+ sky2_tx_clean(sky2);
+ sky2_rx_clean(sky2);
+
+ pci_free_consistent(hw->pdev, RX_LE_BYTES,
+ sky2->rx_le, sky2->rx_le_map);
+ kfree(sky2->rx_ring);
+
+ pci_free_consistent(hw->pdev,
+ TX_RING_SIZE * sizeof(struct sky2_tx_le),
+ sky2->tx_le, sky2->tx_le_map);
+ kfree(sky2->tx_ring);
+
+ sky2->tx_le = NULL;
+ sky2->rx_le = NULL;
+
+ sky2->rx_ring = NULL;
+ sky2->tx_ring = NULL;
+
+ return 0;
+}
+
+static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
+{
+ if (!hw->copper)
+ return SPEED_1000;
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE)
+ return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
+
+ switch (aux & PHY_M_PS_SPEED_MSK) {
+ case PHY_M_PS_SPEED_1000:
+ return SPEED_1000;
+ case PHY_M_PS_SPEED_100:
+ return SPEED_100;
+ default:
+ return SPEED_10;
+ }
+}
+
+static void sky2_link_up(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 reg;
+
+ /* Enable Transmit FIFO Underrun */
+ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
+
+ reg = gma_read16(hw, port, GM_GP_CTRL);
+ if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE)
+ reg |= GM_GPCR_DUP_FULL;
+
+ /* enable Rx/Tx */
+ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+ gma_read16(hw, port, GM_GP_CTRL);
+
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+
+ netif_carrier_on(sky2->netdev);
+ netif_wake_queue(sky2->netdev);
+
+ /* Turn on link LED */
+ sky2_write8(hw, SK_REG(port, LNK_LED_REG),
+ LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(sky2->speed ==
+ SPEED_10 ? 7 : 0) |
+ PHY_M_LEDC_STA1_CTRL(sky2->speed ==
+ SPEED_100 ? 7 : 0) |
+ PHY_M_LEDC_STA0_CTRL(sky2->speed ==
+ SPEED_1000 ? 7 : 0));
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ }
+
+ if (netif_msg_link(sky2))
+ printk(KERN_INFO PFX
+ "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
+ sky2->netdev->name, sky2->speed,
+ sky2->duplex == DUPLEX_FULL ? "full" : "half",
+ (sky2->tx_pause && sky2->rx_pause) ? "both" :
+ sky2->tx_pause ? "tx" : sky2->rx_pause ? "rx" : "none");
+}
+
+static void sky2_link_down(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 reg;
+
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
+
+ reg = gma_read16(hw, port, GM_GP_CTRL);
+ reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+ gma_read16(hw, port, GM_GP_CTRL); /* PCI post */
+
+ if (sky2->rx_pause && !sky2->tx_pause) {
+ /* restore Asymmetric Pause bit */
+ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
+ gm_phy_read(hw, port, PHY_MARV_AUNE_ADV)
+ | PHY_M_AN_ASP);
+ }
+
+ netif_carrier_off(sky2->netdev);
+ netif_stop_queue(sky2->netdev);
+
+ /* Turn on link LED */
+ sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+
+ if (netif_msg_link(sky2))
+ printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
+ sky2_phy_init(hw, port);
+}
+
+static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 lpa;
+
+ lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
+
+ if (lpa & PHY_M_AN_RF) {
+ printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
+ return -1;
+ }
+
+ if (hw->chip_id != CHIP_ID_YUKON_FE &&
+ gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) {
+ printk(KERN_ERR PFX "%s: master/slave fault",
+ sky2->netdev->name);
+ return -1;
+ }
+
+ if (!(aux & PHY_M_PS_SPDUP_RES)) {
+ printk(KERN_ERR PFX "%s: speed/duplex mismatch",
+ sky2->netdev->name);
+ return -1;
+ }
+
+ sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
+
+ sky2->speed = sky2_phy_speed(hw, aux);
+
+ /* Pause bits are offset (9..8) */
+ if (hw->chip_id == CHIP_ID_YUKON_XL)
+ aux >>= 6;
+
+ sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
+ sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0;
+
+ if ((sky2->tx_pause || sky2->rx_pause)
+ && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF))
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
+ else
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+
+ return 0;
+}
+
+/*
+ * Interrupt from PHY are handled outside of interrupt context
+ * because accessing phy registers requires spin wait which might
+ * cause excess interrupt latency.
+ */
+static void sky2_phy_task(void *arg)
+{
+ struct sky2_port *sky2 = arg;
+ struct sky2_hw *hw = sky2->hw;
+ u16 istatus, phystat;
+
+ down(&sky2->phy_sema);
+ istatus = gm_phy_read(hw, sky2->port, PHY_MARV_INT_STAT);
+ phystat = gm_phy_read(hw, sky2->port, PHY_MARV_PHY_STAT);
+
+ if (netif_msg_intr(sky2))
+ printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
+ sky2->netdev->name, istatus, phystat);
+
+ if (istatus & PHY_M_IS_AN_COMPL) {
+ if (sky2_autoneg_done(sky2, phystat) == 0)
+ sky2_link_up(sky2);
+ goto out;
+ }
+
+ if (istatus & PHY_M_IS_LSP_CHANGE)
+ sky2->speed = sky2_phy_speed(hw, phystat);
+
+ if (istatus & PHY_M_IS_DUP_CHANGE)
+ sky2->duplex =
+ (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
+
+ if (istatus & PHY_M_IS_LST_CHANGE) {
+ if (phystat & PHY_M_PS_LINK_UP)
+ sky2_link_up(sky2);
+ else
+ sky2_link_down(sky2);
+ }
+out:
+ up(&sky2->phy_sema);
+
+ local_irq_disable();
+ hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ local_irq_enable();
+}
+
+static void sky2_tx_timeout(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned txq = txqaddr[sky2->port];
+
+ if (netif_msg_timer(sky2))
+ printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
+
+ netif_stop_queue(dev);
+
+ sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP);
+ sky2_read32(hw, Q_ADDR(txq, Q_CSR));
+
+ sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+
+ sky2_tx_clean(sky2);
+
+ sky2_qset(hw, txq);
+ sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1);
+
+ netif_wake_queue(dev);
+}
+
+
+#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
+/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */
+static inline unsigned sky2_buf_size(int mtu)
+{
+ return roundup(mtu + ETH_HLEN + 4, 8);
+}
+
+static int sky2_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ int err;
+ u16 ctl, mode;
+
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
+ return -EINVAL;
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+
+ if (!netif_running(dev)) {
+ dev->mtu = new_mtu;
+ return 0;
+ }
+
+ sky2_write32(hw, B0_IMSK, 0);
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_stop_queue(dev);
+ netif_poll_disable(hw->dev[0]);
+
+ ctl = gma_read16(hw, sky2->port, GM_GP_CTRL);
+ gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
+ sky2_rx_stop(sky2);
+ sky2_rx_clean(sky2);
+
+ dev->mtu = new_mtu;
+ sky2->rx_bufsize = sky2_buf_size(new_mtu);
+ mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
+ GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
+
+ if (dev->mtu > ETH_DATA_LEN)
+ mode |= GM_SMOD_JUMBO_ENA;
+
+ gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode);
+
+ sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD);
+
+ err = sky2_rx_start(sky2);
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
+ if (err)
+ dev_close(dev);
+ else {
+ gma_write16(hw, sky2->port, GM_GP_CTRL, ctl);
+
+ netif_poll_enable(hw->dev[0]);
+ netif_wake_queue(dev);
+ }
+
+ return err;
+}
+
+/*
+ * Receive one packet.
+ * For small packets or errors, just reuse existing skb.
+ * For larger packets, get new buffer.
+ */
+static struct sk_buff *sky2_receive(struct sky2_port *sky2,
+ u16 length, u32 status)
+{
+ struct ring_info *re = sky2->rx_ring + sky2->rx_next;
+ struct sk_buff *skb = NULL;
+
+ if (unlikely(netif_msg_rx_status(sky2)))
+ printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
+ sky2->netdev->name, sky2->rx_next, status, length);
+
+ sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
+ prefetch(sky2->rx_ring + sky2->rx_next);
+
+ if (status & GMR_FS_ANY_ERR)
+ goto error;
+
+ if (!(status & GMR_FS_RX_OK))
+ goto resubmit;
+
+ if ((status >> 16) != length || length > sky2->rx_bufsize)
+ goto oversize;
+
+ if (length < copybreak) {
+ skb = alloc_skb(length + 2, GFP_ATOMIC);
+ if (!skb)
+ goto resubmit;
+
+ skb_reserve(skb, 2);
+ pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr,
+ length, PCI_DMA_FROMDEVICE);
+ memcpy(skb->data, re->skb->data, length);
+ skb->ip_summed = re->skb->ip_summed;
+ skb->csum = re->skb->csum;
+ pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr,
+ length, PCI_DMA_FROMDEVICE);
+ } else {
+ struct sk_buff *nskb;
+
+ nskb = dev_alloc_skb(sky2->rx_bufsize);
+ if (!nskb)
+ goto resubmit;
+
+ skb = re->skb;
+ re->skb = nskb;
+ pci_unmap_single(sky2->hw->pdev, re->mapaddr,
+ sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
+ prefetch(skb->data);
+
+ re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data,
+ sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
+ }
+
+ skb_put(skb, length);
+resubmit:
+ re->skb->ip_summed = CHECKSUM_NONE;
+ sky2_rx_add(sky2, re->mapaddr);
+
+ /* Tell receiver about new buffers. */
+ sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put,
+ &sky2->rx_last_put, RX_LE_SIZE);
+
+ return skb;
+
+oversize:
+ ++sky2->net_stats.rx_over_errors;
+ goto resubmit;
+
+error:
+ ++sky2->net_stats.rx_errors;
+
+ if (netif_msg_rx_err(sky2))
+ printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
+ sky2->netdev->name, status, length);
+
+ if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
+ sky2->net_stats.rx_length_errors++;
+ if (status & GMR_FS_FRAGMENT)
+ sky2->net_stats.rx_frame_errors++;
+ if (status & GMR_FS_CRC_ERR)
+ sky2->net_stats.rx_crc_errors++;
+ if (status & GMR_FS_RX_FF_OV)
+ sky2->net_stats.rx_fifo_errors++;
+
+ goto resubmit;
+}
+
+/*
+ * Check for transmit complete
+ */
+#define TX_NO_STATUS 0xffff
+
+static inline void sky2_tx_check(struct sky2_hw *hw, int port, u16 last)
+{
+ if (last != TX_NO_STATUS) {
+ struct net_device *dev = hw->dev[port];
+ if (dev && netif_running(dev)) {
+ struct sky2_port *sky2 = netdev_priv(dev);
+ sky2_tx_complete(sky2, last);
+ }
+ }
+}
+
+/*
+ * Both ports share the same status interrupt, therefore there is only
+ * one poll routine.
+ */
+static int sky2_poll(struct net_device *dev0, int *budget)
+{
+ struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
+ unsigned int to_do = min(dev0->quota, *budget);
+ unsigned int work_done = 0;
+ u16 hwidx;
+ u16 tx_done[2] = { TX_NO_STATUS, TX_NO_STATUS };
+
+ hwidx = sky2_read16(hw, STAT_PUT_IDX);
+ BUG_ON(hwidx >= STATUS_RING_SIZE);
+ rmb();
+
+ while (hwidx != hw->st_idx) {
+ struct sky2_status_le *le = hw->st_le + hw->st_idx;
+ struct net_device *dev;
+ struct sky2_port *sky2;
+ struct sk_buff *skb;
+ u32 status;
+ u16 length;
+ u8 op;
+
+ le = hw->st_le + hw->st_idx;
+ hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE;
+ prefetch(hw->st_le + hw->st_idx);
+
+ BUG_ON(le->link >= 2);
+ dev = hw->dev[le->link];
+ if (dev == NULL || !netif_running(dev))
+ continue;
+
+ sky2 = netdev_priv(dev);
+ status = le32_to_cpu(le->status);
+ length = le16_to_cpu(le->length);
+ op = le->opcode & ~HW_OWNER;
+ le->opcode = 0;
+
+ switch (op) {
+ case OP_RXSTAT:
+ skb = sky2_receive(sky2, length, status);
+ if (!skb)
+ break;
+
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ dev->last_rx = jiffies;
+
+#ifdef SKY2_VLAN_TAG_USED
+ if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
+ vlan_hwaccel_receive_skb(skb,
+ sky2->vlgrp,
+ be16_to_cpu(sky2->rx_tag));
+ } else
+#endif
+ netif_receive_skb(skb);
+
+ if (++work_done >= to_do)
+ goto exit_loop;
+ break;
+
+#ifdef SKY2_VLAN_TAG_USED
+ case OP_RXVLAN:
+ sky2->rx_tag = length;
+ break;
+
+ case OP_RXCHKSVLAN:
+ sky2->rx_tag = length;
+ /* fall through */
+#endif
+ case OP_RXCHKS:
+ skb = sky2->rx_ring[sky2->rx_next].skb;
+ skb->ip_summed = CHECKSUM_HW;
+ skb->csum = le16_to_cpu(status);
+ break;
+
+ case OP_TXINDEXLE:
+ /* TX index reports status for both ports */
+ tx_done[0] = status & 0xffff;
+ tx_done[1] = ((status >> 24) & 0xff)
+ | (u16)(length & 0xf) << 8;
+ break;
+
+ default:
+ if (net_ratelimit())
+ printk(KERN_WARNING PFX
+ "unknown status opcode 0x%x\n", op);
+ break;
+ }
+ }
+
+exit_loop:
+ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+ mmiowb();
+
+ sky2_tx_check(hw, 0, tx_done[0]);
+ sky2_tx_check(hw, 1, tx_done[1]);
+
+ if (sky2_read16(hw, STAT_PUT_IDX) == hw->st_idx) {
+ /* need to restart TX timer */
+ if (is_ec_a1(hw)) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ }
+
+ netif_rx_complete(dev0);
+ hw->intr_mask |= Y2_IS_STAT_BMU;
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ mmiowb();
+ return 0;
+ } else {
+ *budget -= work_done;
+ dev0->quota -= work_done;
+ return 1;
+ }
+}
+
+static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
+{
+ struct net_device *dev = hw->dev[port];
+
+ printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
+ dev->name, status);
+
+ if (status & Y2_IS_PAR_RD1) {
+ printk(KERN_ERR PFX "%s: ram data read parity error\n",
+ dev->name);
+ /* Clear IRQ */
+ sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
+ }
+
+ if (status & Y2_IS_PAR_WR1) {
+ printk(KERN_ERR PFX "%s: ram data write parity error\n",
+ dev->name);
+
+ sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
+ }
+
+ if (status & Y2_IS_PAR_MAC1) {
+ printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
+ }
+
+ if (status & Y2_IS_PAR_RX1) {
+ printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
+ sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
+ }
+
+ if (status & Y2_IS_TCP_TXA1) {
+ printk(KERN_ERR PFX "%s: TCP segmentation error\n", dev->name);
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
+ }
+}
+
+static void sky2_hw_intr(struct sky2_hw *hw)
+{
+ u32 status = sky2_read32(hw, B0_HWE_ISRC);
+
+ if (status & Y2_IS_TIST_OV)
+ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+
+ if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
+ u16 pci_err;
+
+ pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
+ printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
+ pci_name(hw->pdev), pci_err);
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ pci_write_config_word(hw->pdev, PCI_STATUS,
+ pci_err | PCI_STATUS_ERROR_BITS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ }
+
+ if (status & Y2_IS_PCI_EXP) {
+ /* PCI-Express uncorrectable Error occurred */
+ u32 pex_err;
+
+ pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
+
+ printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
+ pci_name(hw->pdev), pex_err);
+
+ /* clear the interrupt */
+ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+ 0xffffffffUL);
+ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ if (pex_err & PEX_FATAL_ERRORS) {
+ u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
+ hwmsk &= ~Y2_IS_PCI_EXP;
+ sky2_write32(hw, B0_HWE_IMSK, hwmsk);
+ }
+ }
+
+ if (status & Y2_HWE_L1_MASK)
+ sky2_hw_error(hw, 0, status);
+ status >>= 8;
+ if (status & Y2_HWE_L1_MASK)
+ sky2_hw_error(hw, 1, status);
+}
+
+static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
+{
+ struct net_device *dev = hw->dev[port];
+ struct sky2_port *sky2 = netdev_priv(dev);
+ u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
+
+ if (netif_msg_intr(sky2))
+ printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
+ dev->name, status);
+
+ if (status & GM_IS_RX_FF_OR) {
+ ++sky2->net_stats.rx_fifo_errors;
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
+ }
+
+ if (status & GM_IS_TX_FF_UR) {
+ ++sky2->net_stats.tx_fifo_errors;
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
+ }
+}
+
+static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
+{
+ struct net_device *dev = hw->dev[port];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ schedule_work(&sky2->phy_task);
+}
+
+static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct sky2_hw *hw = dev_id;
+ struct net_device *dev0 = hw->dev[0];
+ u32 status;
+
+ status = sky2_read32(hw, B0_Y2_SP_ISRC2);
+ if (status == 0 || status == ~0)
+ return IRQ_NONE;
+
+ if (status & Y2_IS_HW_ERR)
+ sky2_hw_intr(hw);
+
+ /* Do NAPI for Rx and Tx status */
+ if (status & Y2_IS_STAT_BMU) {
+ hw->intr_mask &= ~Y2_IS_STAT_BMU;
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
+ if (likely(__netif_rx_schedule_prep(dev0))) {
+ prefetch(&hw->st_le[hw->st_idx]);
+ __netif_rx_schedule(dev0);
+ }
+ }
+
+ if (status & Y2_IS_IRQ_PHY1)
+ sky2_phy_intr(hw, 0);
+
+ if (status & Y2_IS_IRQ_PHY2)
+ sky2_phy_intr(hw, 1);
+
+ if (status & Y2_IS_IRQ_MAC1)
+ sky2_mac_intr(hw, 0);
+
+ if (status & Y2_IS_IRQ_MAC2)
+ sky2_mac_intr(hw, 1);
+
+ sky2_write32(hw, B0_Y2_SP_ICR, 2);
+
+ sky2_read32(hw, B0_IMSK);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sky2_netpoll(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ sky2_intr(sky2->hw->pdev->irq, sky2->hw, NULL);
+}
+#endif
+
+/* Chip internal frequency for clock calculations */
+static inline u32 sky2_mhz(const struct sky2_hw *hw)
+{
+ switch (hw->chip_id) {
+ case CHIP_ID_YUKON_EC:
+ case CHIP_ID_YUKON_EC_U:
+ return 125; /* 125 Mhz */
+ case CHIP_ID_YUKON_FE:
+ return 100; /* 100 Mhz */
+ default: /* YUKON_XL */
+ return 156; /* 156 Mhz */
+ }
+}
+
+static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
+{
+ return sky2_mhz(hw) * us;
+}
+
+static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
+{
+ return clk / sky2_mhz(hw);
+}
+
+
+static int sky2_reset(struct sky2_hw *hw)
+{
+ u32 ctst;
+ u16 status;
+ u8 t8, pmd_type;
+ int i;
+
+ ctst = sky2_read32(hw, B0_CTST);
+
+ sky2_write8(hw, B0_CTST, CS_RST_CLR);
+ hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
+ if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
+ printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
+ pci_name(hw->pdev), hw->chip_id);
+ return -EOPNOTSUPP;
+ }
+
+ /* ring for status responses */
+ hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
+ &hw->st_dma);
+ if (!hw->st_le)
+ return -ENOMEM;
+
+ /* disable ASF */
+ if (hw->chip_id <= CHIP_ID_YUKON_EC) {
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
+ }
+
+ /* do a SW reset */
+ sky2_write8(hw, B0_CTST, CS_RST_SET);
+ sky2_write8(hw, B0_CTST, CS_RST_CLR);
+
+ /* clear PCI errors, if any */
+ pci_read_config_word(hw->pdev, PCI_STATUS, &status);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ pci_write_config_word(hw->pdev, PCI_STATUS,
+ status | PCI_STATUS_ERROR_BITS);
+
+ sky2_write8(hw, B0_CTST, CS_MRST_CLR);
+
+ /* clear any PEX errors */
+ if (is_pciex(hw)) {
+ u16 lstat;
+ pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+ 0xffffffffUL);
+ pci_read_config_word(hw->pdev, PEX_LNK_STAT, &lstat);
+ }
+
+ pmd_type = sky2_read8(hw, B2_PMD_TYP);
+ hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
+
+ hw->ports = 1;
+ t8 = sky2_read8(hw, B2_Y2_HW_RES);
+ if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+ if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
+ ++hw->ports;
+ }
+ hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
+
+ sky2_set_power_state(hw, PCI_D0);
+
+ for (i = 0; i < hw->ports; i++) {
+ sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+ sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+ }
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* Clear I2C IRQ noise */
+ sky2_write32(hw, B2_I2C_IRQ, 1);
+
+ /* turn off hardware timer (unused) */
+ sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
+ sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
+
+ sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
+
+ /* Turn off descriptor polling */
+ sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
+
+ /* Turn off receive timestamp */
+ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
+ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+
+ /* enable the Tx Arbiters */
+ for (i = 0; i < hw->ports; i++)
+ sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
+
+ /* Initialize ram interface */
+ for (i = 0; i < hw->ports; i++) {
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
+
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
+ sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
+ }
+
+ sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
+
+ for (i = 0; i < hw->ports; i++)
+ sky2_phy_reset(hw, i);
+
+ memset(hw->st_le, 0, STATUS_LE_BYTES);
+ hw->st_idx = 0;
+
+ sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
+ sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
+
+ sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
+ sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
+
+ /* Set the list last index */
+ sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1);
+
+ /* These status setup values are copied from SysKonnect's driver */
+ if (is_ec_a1(hw)) {
+ /* WA for dev. #4.3 */
+ sky2_write16(hw, STAT_TX_IDX_TH, 0xfff); /* Tx Threshold */
+
+ /* set Status-FIFO watermark */
+ sky2_write8(hw, STAT_FIFO_WM, 0x21); /* WA for dev. #4.18 */
+
+ /* set Status-FIFO ISR watermark */
+ sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07); /* WA for dev. #4.18 */
+ sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 10000));
+ } else {
+ sky2_write16(hw, STAT_TX_IDX_TH, 10);
+ sky2_write8(hw, STAT_FIFO_WM, 16);
+
+ /* set Status-FIFO ISR watermark */
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
+ sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
+ else
+ sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
+
+ sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
+ sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
+ sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+ }
+
+ /* enable status unit */
+ sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
+
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+
+ return 0;
+}
+
+static inline u32 sky2_supported_modes(const struct sky2_hw *hw)
+{
+ u32 modes;
+ if (hw->copper) {
+ modes = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg | SUPPORTED_TP;
+
+ if (hw->chip_id != CHIP_ID_YUKON_FE)
+ modes |= SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full;
+ } else
+ modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
+ | SUPPORTED_Autoneg;
+ return modes;
+}
+
+static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ ecmd->transceiver = XCVR_INTERNAL;
+ ecmd->supported = sky2_supported_modes(hw);
+ ecmd->phy_address = PHY_ADDR_MARV;
+ if (hw->copper) {
+ ecmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg | SUPPORTED_TP;
+ ecmd->port = PORT_TP;
+ } else
+ ecmd->port = PORT_FIBRE;
+
+ ecmd->advertising = sky2->advertising;
+ ecmd->autoneg = sky2->autoneg;
+ ecmd->speed = sky2->speed;
+ ecmd->duplex = sky2->duplex;
+ return 0;
+}
+
+static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ const struct sky2_hw *hw = sky2->hw;
+ u32 supported = sky2_supported_modes(hw);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ ecmd->advertising = supported;
+ sky2->duplex = -1;
+ sky2->speed = -1;
+ } else {
+ u32 setting;
+
+ switch (ecmd->speed) {
+ case SPEED_1000:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_1000baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_1000baseT_Half;
+ else
+ return -EINVAL;
+ break;
+ case SPEED_100:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_100baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_100baseT_Half;
+ else
+ return -EINVAL;
+ break;
+
+ case SPEED_10:
+ if (ecmd->duplex == DUPLEX_FULL)
+ setting = SUPPORTED_10baseT_Full;
+ else if (ecmd->duplex == DUPLEX_HALF)
+ setting = SUPPORTED_10baseT_Half;
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if ((setting & supported) == 0)
+ return -EINVAL;
+
+ sky2->speed = ecmd->speed;
+ sky2->duplex = ecmd->duplex;
+ }
+
+ sky2->autoneg = ecmd->autoneg;
+ sky2->advertising = ecmd->advertising;
+
+ if (netif_running(dev))
+ sky2_phy_reinit(sky2);
+
+ return 0;
+}
+
+static void sky2_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(sky2->hw->pdev));
+}
+
+static const struct sky2_stat {
+ char name[ETH_GSTRING_LEN];
+ u16 offset;
+} sky2_stats[] = {
+ { "tx_bytes", GM_TXO_OK_HI },
+ { "rx_bytes", GM_RXO_OK_HI },
+ { "tx_broadcast", GM_TXF_BC_OK },
+ { "rx_broadcast", GM_RXF_BC_OK },
+ { "tx_multicast", GM_TXF_MC_OK },
+ { "rx_multicast", GM_RXF_MC_OK },
+ { "tx_unicast", GM_TXF_UC_OK },
+ { "rx_unicast", GM_RXF_UC_OK },
+ { "tx_mac_pause", GM_TXF_MPAUSE },
+ { "rx_mac_pause", GM_RXF_MPAUSE },
+ { "collisions", GM_TXF_SNG_COL },
+ { "late_collision",GM_TXF_LAT_COL },
+ { "aborted", GM_TXF_ABO_COL },
+ { "multi_collisions", GM_TXF_MUL_COL },
+ { "fifo_underrun", GM_TXE_FIFO_UR },
+ { "fifo_overflow", GM_RXE_FIFO_OV },
+ { "rx_toolong", GM_RXF_LNG_ERR },
+ { "rx_jabber", GM_RXF_JAB_PKT },
+ { "rx_runt", GM_RXE_FRAG },
+ { "rx_too_long", GM_RXF_LNG_ERR },
+ { "rx_fcs_error", GM_RXF_FCS_ERR },
+};
+
+static u32 sky2_get_rx_csum(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ return sky2->rx_csum;
+}
+
+static int sky2_set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ sky2->rx_csum = data;
+
+ sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+
+ return 0;
+}
+
+static u32 sky2_get_msglevel(struct net_device *netdev)
+{
+ struct sky2_port *sky2 = netdev_priv(netdev);
+ return sky2->msg_enable;
+}
+
+static int sky2_nway_reset(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+
+ sky2_phy_reinit(sky2);
+
+ return 0;
+}
+
+static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ int i;
+
+ data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
+ | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
+ data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
+ | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
+
+ for (i = 2; i < count; i++)
+ data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
+}
+
+static void sky2_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct sky2_port *sky2 = netdev_priv(netdev);
+ sky2->msg_enable = value;
+}
+
+static int sky2_get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(sky2_stats);
+}
+
+static void sky2_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 * data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
+}
+
+static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
+{
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
+ memcpy(data + i * ETH_GSTRING_LEN,
+ sky2_stats[i].name, ETH_GSTRING_LEN);
+ break;
+ }
+}
+
+/* Use hardware MIB variables for critical path statistics and
+ * transmit feedback not reported at interrupt.
+ * Other errors are accounted for in interrupt handler.
+ */
+static struct net_device_stats *sky2_get_stats(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ u64 data[13];
+
+ sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
+
+ sky2->net_stats.tx_bytes = data[0];
+ sky2->net_stats.rx_bytes = data[1];
+ sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
+ sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
+ sky2->net_stats.multicast = data[5] + data[7];
+ sky2->net_stats.collisions = data[10];
+ sky2->net_stats.tx_aborted_errors = data[12];
+
+ return &sky2->net_stats;
+}
+
+static int sky2_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+ memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port * 8,
+ dev->dev_addr, ETH_ALEN);
+ memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port * 8,
+ dev->dev_addr, ETH_ALEN);
+
+ if (netif_running(dev))
+ sky2_phy_reinit(sky2);
+
+ return 0;
+}
+
+static void sky2_set_multicast(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ struct dev_mc_list *list = dev->mc_list;
+ u16 reg;
+ u8 filter[8];
+
+ memset(filter, 0, sizeof(filter));
+
+ reg = gma_read16(hw, port, GM_RX_CTRL);
+ reg |= GM_RXCR_UCF_ENA;
+
+ if (dev->flags & IFF_PROMISC) /* promiscuous */
+ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+ else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */
+ memset(filter, 0xff, sizeof(filter));
+ else if (dev->mc_count == 0) /* no multicast */
+ reg &= ~GM_RXCR_MCF_ENA;
+ else {
+ int i;
+ reg |= GM_RXCR_MCF_ENA;
+
+ for (i = 0; list && i < dev->mc_count; i++, list = list->next) {
+ u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f;
+ filter[bit / 8] |= 1 << (bit % 8);
+ }
+ }
+
+ gma_write16(hw, port, GM_MC_ADDR_H1,
+ (u16) filter[0] | ((u16) filter[1] << 8));
+ gma_write16(hw, port, GM_MC_ADDR_H2,
+ (u16) filter[2] | ((u16) filter[3] << 8));
+ gma_write16(hw, port, GM_MC_ADDR_H3,
+ (u16) filter[4] | ((u16) filter[5] << 8));
+ gma_write16(hw, port, GM_MC_ADDR_H4,
+ (u16) filter[6] | ((u16) filter[7] << 8));
+
+ gma_write16(hw, port, GM_RX_CTRL, reg);
+}
+
+/* Can have one global because blinking is controlled by
+ * ethtool and that is always under RTNL mutex
+ */
+static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
+{
+ u16 pg;
+
+ switch (hw->chip_id) {
+ case CHIP_ID_YUKON_XL:
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ on ? (PHY_M_LEDC_LOS_CTRL(1) |
+ PHY_M_LEDC_INIT_CTRL(7) |
+ PHY_M_LEDC_STA1_CTRL(7) |
+ PHY_M_LEDC_STA0_CTRL(7))
+ : 0);
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ break;
+
+ default:
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ on ? PHY_M_LED_MO_DUP(MO_LED_ON) |
+ PHY_M_LED_MO_10(MO_LED_ON) |
+ PHY_M_LED_MO_100(MO_LED_ON) |
+ PHY_M_LED_MO_1000(MO_LED_ON) |
+ PHY_M_LED_MO_RX(MO_LED_ON)
+ : PHY_M_LED_MO_DUP(MO_LED_OFF) |
+ PHY_M_LED_MO_10(MO_LED_OFF) |
+ PHY_M_LED_MO_100(MO_LED_OFF) |
+ PHY_M_LED_MO_1000(MO_LED_OFF) |
+ PHY_M_LED_MO_RX(MO_LED_OFF));
+
+ }
+}
+
+/* blink LED's for finding board */
+static int sky2_phys_id(struct net_device *dev, u32 data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 ledctrl, ledover = 0;
+ long ms;
+ int interrupted;
+ int onoff = 1;
+
+ if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
+ ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
+ else
+ ms = data * 1000;
+
+ /* save initial values */
+ down(&sky2->phy_sema);
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+ ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ } else {
+ ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
+ ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
+ }
+
+ interrupted = 0;
+ while (!interrupted && ms > 0) {
+ sky2_led(hw, port, onoff);
+ onoff = !onoff;
+
+ up(&sky2->phy_sema);
+ interrupted = msleep_interruptible(250);
+ down(&sky2->phy_sema);
+
+ ms -= 250;
+ }
+
+ /* resume regularly scheduled programming */
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ } else {
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+ }
+ up(&sky2->phy_sema);
+
+ return 0;
+}
+
+static void sky2_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ ecmd->tx_pause = sky2->tx_pause;
+ ecmd->rx_pause = sky2->rx_pause;
+ ecmd->autoneg = sky2->autoneg;
+}
+
+static int sky2_set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ int err = 0;
+
+ sky2->autoneg = ecmd->autoneg;
+ sky2->tx_pause = ecmd->tx_pause != 0;
+ sky2->rx_pause = ecmd->rx_pause != 0;
+
+ sky2_phy_reinit(sky2);
+
+ return err;
+}
+
+#ifdef CONFIG_PM
+static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = sky2->wol ? WAKE_MAGIC : 0;
+}
+
+static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
+ return -EOPNOTSUPP;
+
+ sky2->wol = wol->wolopts == WAKE_MAGIC;
+
+ if (sky2->wol) {
+ memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN);
+
+ sky2_write16(hw, WOL_CTRL_STAT,
+ WOL_CTL_ENA_PME_ON_MAGIC_PKT |
+ WOL_CTL_ENA_MAGIC_PKT_UNIT);
+ } else
+ sky2_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT);
+
+ return 0;
+}
+#endif
+
+static int sky2_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
+ ecmd->tx_coalesce_usecs = 0;
+ else {
+ u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
+ ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
+ }
+ ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
+
+ if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
+ ecmd->rx_coalesce_usecs = 0;
+ else {
+ u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
+ ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
+ }
+ ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
+
+ if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
+ ecmd->rx_coalesce_usecs_irq = 0;
+ else {
+ u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
+ ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
+ }
+
+ ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
+
+ return 0;
+}
+
+/* Note: this affect both ports */
+static int sky2_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ const u32 tmin = sky2_clk2us(hw, 1);
+ const u32 tmax = 5000;
+
+ if (ecmd->tx_coalesce_usecs != 0 &&
+ (ecmd->tx_coalesce_usecs < tmin || ecmd->tx_coalesce_usecs > tmax))
+ return -EINVAL;
+
+ if (ecmd->rx_coalesce_usecs != 0 &&
+ (ecmd->rx_coalesce_usecs < tmin || ecmd->rx_coalesce_usecs > tmax))
+ return -EINVAL;
+
+ if (ecmd->rx_coalesce_usecs_irq != 0 &&
+ (ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
+ return -EINVAL;
+
+ if (ecmd->tx_max_coalesced_frames > 0xffff)
+ return -EINVAL;
+ if (ecmd->rx_max_coalesced_frames > 0xff)
+ return -EINVAL;
+ if (ecmd->rx_max_coalesced_frames_irq > 0xff)
+ return -EINVAL;
+
+ if (ecmd->tx_coalesce_usecs == 0)
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ else {
+ sky2_write32(hw, STAT_TX_TIMER_INI,
+ sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ }
+ sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
+
+ if (ecmd->rx_coalesce_usecs == 0)
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+ else {
+ sky2_write32(hw, STAT_LEV_TIMER_INI,
+ sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ }
+ sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
+
+ if (ecmd->rx_coalesce_usecs_irq == 0)
+ sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
+ else {
+ sky2_write32(hw, STAT_TX_TIMER_INI,
+ sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
+ sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+ }
+ sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
+ return 0;
+}
+
+static void sky2_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ering)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ ering->rx_max_pending = RX_MAX_PENDING;
+ ering->rx_mini_max_pending = 0;
+ ering->rx_jumbo_max_pending = 0;
+ ering->tx_max_pending = TX_RING_SIZE - 1;
+
+ ering->rx_pending = sky2->rx_pending;
+ ering->rx_mini_pending = 0;
+ ering->rx_jumbo_pending = 0;
+ ering->tx_pending = sky2->tx_pending;
+}
+
+static int sky2_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ering)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ int err = 0;
+
+ if (ering->rx_pending > RX_MAX_PENDING ||
+ ering->rx_pending < 8 ||
+ ering->tx_pending < MAX_SKB_TX_LE ||
+ ering->tx_pending > TX_RING_SIZE - 1)
+ return -EINVAL;
+
+ if (netif_running(dev))
+ sky2_down(dev);
+
+ sky2->rx_pending = ering->rx_pending;
+ sky2->tx_pending = ering->tx_pending;
+
+ if (netif_running(dev)) {
+ err = sky2_up(dev);
+ if (err)
+ dev_close(dev);
+ else
+ sky2_set_multicast(dev);
+ }
+
+ return err;
+}
+
+static int sky2_get_regs_len(struct net_device *dev)
+{
+ return 0x4000;
+}
+
+/*
+ * Returns copy of control register region
+ * Note: access to the RAM address register set will cause timeouts.
+ */
+static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ const void __iomem *io = sky2->hw->regs;
+
+ BUG_ON(regs->len < B3_RI_WTO_R1);
+ regs->version = 1;
+ memset(p, 0, regs->len);
+
+ memcpy_fromio(p, io, B3_RAM_ADDR);
+
+ memcpy_fromio(p + B3_RI_WTO_R1,
+ io + B3_RI_WTO_R1,
+ regs->len - B3_RI_WTO_R1);
+}
+
+static struct ethtool_ops sky2_ethtool_ops = {
+ .get_settings = sky2_get_settings,
+ .set_settings = sky2_set_settings,
+ .get_drvinfo = sky2_get_drvinfo,
+ .get_msglevel = sky2_get_msglevel,
+ .set_msglevel = sky2_set_msglevel,
+ .nway_reset = sky2_nway_reset,
+ .get_regs_len = sky2_get_regs_len,
+ .get_regs = sky2_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+ .get_rx_csum = sky2_get_rx_csum,
+ .set_rx_csum = sky2_set_rx_csum,
+ .get_strings = sky2_get_strings,
+ .get_coalesce = sky2_get_coalesce,
+ .set_coalesce = sky2_set_coalesce,
+ .get_ringparam = sky2_get_ringparam,
+ .set_ringparam = sky2_set_ringparam,
+ .get_pauseparam = sky2_get_pauseparam,
+ .set_pauseparam = sky2_set_pauseparam,
+#ifdef CONFIG_PM
+ .get_wol = sky2_get_wol,
+ .set_wol = sky2_set_wol,
+#endif
+ .phys_id = sky2_phys_id,
+ .get_stats_count = sky2_get_stats_count,
+ .get_ethtool_stats = sky2_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
+};
+
+/* Initialize network device */
+static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
+ unsigned port, int highmem)
+{
+ struct sky2_port *sky2;
+ struct net_device *dev = alloc_etherdev(sizeof(*sky2));
+
+ if (!dev) {
+ printk(KERN_ERR "sky2 etherdev alloc failed");
+ return NULL;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &hw->pdev->dev);
+ dev->irq = hw->pdev->irq;
+ dev->open = sky2_up;
+ dev->stop = sky2_down;
+ dev->do_ioctl = sky2_ioctl;
+ dev->hard_start_xmit = sky2_xmit_frame;
+ dev->get_stats = sky2_get_stats;
+ dev->set_multicast_list = sky2_set_multicast;
+ dev->set_mac_address = sky2_set_mac_address;
+ dev->change_mtu = sky2_change_mtu;
+ SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
+ dev->tx_timeout = sky2_tx_timeout;
+ dev->watchdog_timeo = TX_WATCHDOG;
+ if (port == 0)
+ dev->poll = sky2_poll;
+ dev->weight = NAPI_WEIGHT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = sky2_netpoll;
+#endif
+
+ sky2 = netdev_priv(dev);
+ sky2->netdev = dev;
+ sky2->hw = hw;
+ sky2->msg_enable = netif_msg_init(debug, default_msg);
+
+ spin_lock_init(&sky2->tx_lock);
+ /* Auto speed and flow control */
+ sky2->autoneg = AUTONEG_ENABLE;
+ sky2->tx_pause = 1;
+ sky2->rx_pause = 1;
+ sky2->duplex = -1;
+ sky2->speed = -1;
+ sky2->advertising = sky2_supported_modes(hw);
+
+ /* Receive checksum disabled for Yukon XL
+ * because of observed problems with incorrect
+ * values when multiple packets are received in one interrupt
+ */
+ sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+
+ INIT_WORK(&sky2->phy_task, sky2_phy_task, sky2);
+ init_MUTEX(&sky2->phy_sema);
+ sky2->tx_pending = TX_DEF_PENDING;
+ sky2->rx_pending = is_ec_a1(hw) ? 8 : RX_DEF_PENDING;
+ sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN);
+
+ hw->dev[port] = dev;
+
+ sky2->port = port;
+
+ dev->features |= NETIF_F_LLTX;
+ if (hw->chip_id != CHIP_ID_YUKON_EC_U)
+ dev->features |= NETIF_F_TSO;
+ if (highmem)
+ dev->features |= NETIF_F_HIGHDMA;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+
+#ifdef SKY2_VLAN_TAG_USED
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_rx_register = sky2_vlan_rx_register;
+ dev->vlan_rx_kill_vid = sky2_vlan_rx_kill_vid;
+#endif
+
+ /* read the mac address */
+ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* device is off until link detection */
+ netif_carrier_off(dev);
+ netif_stop_queue(dev);
+
+ return dev;
+}
+
+static inline void sky2_show_addr(struct net_device *dev)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (netif_msg_probe(sky2))
+ printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+}
+
+static int __devinit sky2_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev, *dev1 = NULL;
+ struct sky2_hw *hw;
+ int err, pm_cap, using_dac = 0;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "%s cannot enable PCI device\n",
+ pci_name(pdev));
+ goto err_out;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
+ pci_name(pdev));
+ goto err_out;
+ }
+
+ pci_set_master(pdev);
+
+ /* Find power-management capability. */
+ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pm_cap == 0) {
+ printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
+ "aborting.\n");
+ err = -EIO;
+ goto err_out_free_regions;
+ }
+
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ if (!err)
+ using_dac = 1;
+ }
+
+ if (!using_dac) {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ printk(KERN_ERR PFX "%s no usable DMA configuration\n",
+ pci_name(pdev));
+ goto err_out_free_regions;
+ }
+ }
+#ifdef __BIG_ENDIAN
+ /* byte swap descriptors in hardware */
+ {
+ u32 reg;
+
+ pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
+ reg |= PCI_REV_DESC;
+ pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
+ }
+#endif
+
+ err = -ENOMEM;
+ hw = kmalloc(sizeof(*hw), GFP_KERNEL);
+ if (!hw) {
+ printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
+ pci_name(pdev));
+ goto err_out_free_regions;
+ }
+
+ memset(hw, 0, sizeof(*hw));
+ hw->pdev = pdev;
+
+ hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
+ if (!hw->regs) {
+ printk(KERN_ERR PFX "%s: cannot map device registers\n",
+ pci_name(pdev));
+ goto err_out_free_hw;
+ }
+ hw->pm_cap = pm_cap;
+
+ err = sky2_reset(hw);
+ if (err)
+ goto err_out_iounmap;
+
+ printk(KERN_INFO PFX "v%s addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n",
+ DRV_VERSION, pci_resource_start(pdev, 0), pdev->irq,
+ yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
+ hw->chip_id, hw->chip_rev);
+
+ dev = sky2_init_netdev(hw, 0, using_dac);
+ if (!dev)
+ goto err_out_free_pci;
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "%s: cannot register net device\n",
+ pci_name(pdev));
+ goto err_out_free_netdev;
+ }
+
+ sky2_show_addr(dev);
+
+ if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
+ if (register_netdev(dev1) == 0)
+ sky2_show_addr(dev1);
+ else {
+ /* Failure to register second port need not be fatal */
+ printk(KERN_WARNING PFX
+ "register of second port failed\n");
+ hw->dev[1] = NULL;
+ free_netdev(dev1);
+ }
+ }
+
+ err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+ if (err) {
+ printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+ pci_name(pdev), pdev->irq);
+ goto err_out_unregister;
+ }
+
+ hw->intr_mask = Y2_IS_BASE;
+ sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
+ pci_set_drvdata(pdev, hw);
+
+ return 0;
+
+err_out_unregister:
+ if (dev1) {
+ unregister_netdev(dev1);
+ free_netdev(dev1);
+ }
+ unregister_netdev(dev);
+err_out_free_netdev:
+ free_netdev(dev);
+err_out_free_pci:
+ sky2_write8(hw, B0_CTST, CS_RST_SET);
+ pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
+err_out_iounmap:
+ iounmap(hw->regs);
+err_out_free_hw:
+ kfree(hw);
+err_out_free_regions:
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+err_out:
+ return err;
+}
+
+static void __devexit sky2_remove(struct pci_dev *pdev)
+{
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ struct net_device *dev0, *dev1;
+
+ if (!hw)
+ return;
+
+ dev0 = hw->dev[0];
+ dev1 = hw->dev[1];
+ if (dev1)
+ unregister_netdev(dev1);
+ unregister_netdev(dev0);
+
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_set_power_state(hw, PCI_D3hot);
+ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
+ sky2_write8(hw, B0_CTST, CS_RST_SET);
+ sky2_read8(hw, B0_CTST);
+
+ free_irq(pdev->irq, hw);
+ pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ if (dev1)
+ free_netdev(dev1);
+ free_netdev(dev0);
+ iounmap(hw->regs);
+ kfree(hw);
+
+ pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct net_device *dev = hw->dev[i];
+
+ if (dev) {
+ if (!netif_running(dev))
+ continue;
+
+ sky2_down(dev);
+ netif_device_detach(dev);
+ }
+ }
+
+ return sky2_set_power_state(hw, pci_choose_state(pdev, state));
+}
+
+static int sky2_resume(struct pci_dev *pdev)
+{
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int i;
+
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ sky2_set_power_state(hw, PCI_D0);
+
+ sky2_reset(hw);
+
+ for (i = 0; i < 2; i++) {
+ struct net_device *dev = hw->dev[i];
+ if (dev) {
+ if (netif_running(dev)) {
+ netif_device_attach(dev);
+ if (sky2_up(dev))
+ dev_close(dev);
+ }
+ }
+ }
+ return 0;
+}
+#endif
+
+static struct pci_driver sky2_driver = {
+ .name = DRV_NAME,
+ .id_table = sky2_id_table,
+ .probe = sky2_probe,
+ .remove = __devexit_p(sky2_remove),
+#ifdef CONFIG_PM
+ .suspend = sky2_suspend,
+ .resume = sky2_resume,
+#endif
+};
+
+static int __init sky2_init_module(void)
+{
+ return pci_register_driver(&sky2_driver);
+}
+
+static void __exit sky2_cleanup_module(void)
+{
+ pci_unregister_driver(&sky2_driver);
+}
+
+module_init(sky2_init_module);
+module_exit(sky2_cleanup_module);
+
+MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
new file mode 100644
index 00000000000..95518921001
--- /dev/null
+++ b/drivers/net/sky2.h
@@ -0,0 +1,1922 @@
+/*
+ * Definitions for the new Marvell Yukon 2 driver.
+ */
+#ifndef _SKY2_H
+#define _SKY2_H
+
+/* PCI config registers */
+#define PCI_DEV_REG1 0x40
+#define PCI_DEV_REG2 0x44
+#define PCI_DEV_STATUS 0x7c
+#define PCI_OS_PCI_X (1<<26)
+
+#define PEX_LNK_STAT 0xf2
+#define PEX_UNC_ERR_STAT 0x104
+#define PEX_DEV_CTRL 0xe8
+
+/* Yukon-2 */
+enum pci_dev_reg_1 {
+ PCI_Y2_PIG_ENA = 1<<31, /* Enable Plug-in-Go (YUKON-2) */
+ PCI_Y2_DLL_DIS = 1<<30, /* Disable PCI DLL (YUKON-2) */
+ PCI_Y2_PHY2_COMA = 1<<29, /* Set PHY 2 to Coma Mode (YUKON-2) */
+ PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */
+ PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
+ PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */
+};
+
+enum pci_dev_reg_2 {
+ PCI_VPD_WR_THR = 0xffL<<24, /* Bit 31..24: VPD Write Threshold */
+ PCI_DEV_SEL = 0x7fL<<17, /* Bit 23..17: EEPROM Device Select */
+ PCI_VPD_ROM_SZ = 7L<<14, /* Bit 16..14: VPD ROM Size */
+
+ PCI_PATCH_DIR = 0xfL<<8, /* Bit 11.. 8: Ext Patches dir 3..0 */
+ PCI_EXT_PATCHS = 0xfL<<4, /* Bit 7.. 4: Extended Patches 3..0 */
+ PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */
+ PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */
+
+ PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
+};
+
+
+#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_PARITY)
+
+enum pex_dev_ctrl {
+ PEX_DC_MAX_RRS_MSK = 7<<12, /* Bit 14..12: Max. Read Request Size */
+ PEX_DC_EN_NO_SNOOP = 1<<11,/* Enable No Snoop */
+ PEX_DC_EN_AUX_POW = 1<<10,/* Enable AUX Power */
+ PEX_DC_EN_PHANTOM = 1<<9, /* Enable Phantom Functions */
+ PEX_DC_EN_EXT_TAG = 1<<8, /* Enable Extended Tag Field */
+ PEX_DC_MAX_PLS_MSK = 7<<5, /* Bit 7.. 5: Max. Payload Size Mask */
+ PEX_DC_EN_REL_ORD = 1<<4, /* Enable Relaxed Ordering */
+ PEX_DC_EN_UNS_RQ_RP = 1<<3, /* Enable Unsupported Request Reporting */
+ PEX_DC_EN_FAT_ER_RP = 1<<2, /* Enable Fatal Error Reporting */
+ PEX_DC_EN_NFA_ER_RP = 1<<1, /* Enable Non-Fatal Error Reporting */
+ PEX_DC_EN_COR_ER_RP = 1<<0, /* Enable Correctable Error Reporting */
+};
+#define PEX_DC_MAX_RD_RQ_SIZE(x) (((x)<<12) & PEX_DC_MAX_RRS_MSK)
+
+/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */
+enum pex_err {
+ PEX_UNSUP_REQ = 1<<20, /* Unsupported Request Error */
+
+ PEX_MALFOR_TLP = 1<<18, /* Malformed TLP */
+
+ PEX_UNEXP_COMP = 1<<16, /* Unexpected Completion */
+
+ PEX_COMP_TO = 1<<14, /* Completion Timeout */
+ PEX_FLOW_CTRL_P = 1<<13, /* Flow Control Protocol Error */
+ PEX_POIS_TLP = 1<<12, /* Poisoned TLP */
+
+ PEX_DATA_LINK_P = 1<<4, /* Data Link Protocol Error */
+ PEX_FATAL_ERRORS= (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P),
+};
+
+
+enum csr_regs {
+ B0_RAP = 0x0000,
+ B0_CTST = 0x0004,
+ B0_Y2LED = 0x0005,
+ B0_POWER_CTRL = 0x0007,
+ B0_ISRC = 0x0008,
+ B0_IMSK = 0x000c,
+ B0_HWE_ISRC = 0x0010,
+ B0_HWE_IMSK = 0x0014,
+
+ /* Special ISR registers (Yukon-2 only) */
+ B0_Y2_SP_ISRC2 = 0x001c,
+ B0_Y2_SP_ISRC3 = 0x0020,
+ B0_Y2_SP_EISR = 0x0024,
+ B0_Y2_SP_LISR = 0x0028,
+ B0_Y2_SP_ICR = 0x002c,
+
+ B2_MAC_1 = 0x0100,
+ B2_MAC_2 = 0x0108,
+ B2_MAC_3 = 0x0110,
+ B2_CONN_TYP = 0x0118,
+ B2_PMD_TYP = 0x0119,
+ B2_MAC_CFG = 0x011a,
+ B2_CHIP_ID = 0x011b,
+ B2_E_0 = 0x011c,
+
+ B2_Y2_CLK_GATE = 0x011d,
+ B2_Y2_HW_RES = 0x011e,
+ B2_E_3 = 0x011f,
+ B2_Y2_CLK_CTRL = 0x0120,
+
+ B2_TI_INI = 0x0130,
+ B2_TI_VAL = 0x0134,
+ B2_TI_CTRL = 0x0138,
+ B2_TI_TEST = 0x0139,
+
+ B2_TST_CTRL1 = 0x0158,
+ B2_TST_CTRL2 = 0x0159,
+ B2_GP_IO = 0x015c,
+
+ B2_I2C_CTRL = 0x0160,
+ B2_I2C_DATA = 0x0164,
+ B2_I2C_IRQ = 0x0168,
+ B2_I2C_SW = 0x016c,
+
+ B3_RAM_ADDR = 0x0180,
+ B3_RAM_DATA_LO = 0x0184,
+ B3_RAM_DATA_HI = 0x0188,
+
+/* RAM Interface Registers */
+/* Yukon-2: use RAM_BUFFER() to access the RAM buffer */
+/*
+ * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transferred continuously.
+ */
+#define RAM_BUFFER(port, reg) (reg | (port <<6))
+
+ B3_RI_WTO_R1 = 0x0190,
+ B3_RI_WTO_XA1 = 0x0191,
+ B3_RI_WTO_XS1 = 0x0192,
+ B3_RI_RTO_R1 = 0x0193,
+ B3_RI_RTO_XA1 = 0x0194,
+ B3_RI_RTO_XS1 = 0x0195,
+ B3_RI_WTO_R2 = 0x0196,
+ B3_RI_WTO_XA2 = 0x0197,
+ B3_RI_WTO_XS2 = 0x0198,
+ B3_RI_RTO_R2 = 0x0199,
+ B3_RI_RTO_XA2 = 0x019a,
+ B3_RI_RTO_XS2 = 0x019b,
+ B3_RI_TO_VAL = 0x019c,
+ B3_RI_CTRL = 0x01a0,
+ B3_RI_TEST = 0x01a2,
+ B3_MA_TOINI_RX1 = 0x01b0,
+ B3_MA_TOINI_RX2 = 0x01b1,
+ B3_MA_TOINI_TX1 = 0x01b2,
+ B3_MA_TOINI_TX2 = 0x01b3,
+ B3_MA_TOVAL_RX1 = 0x01b4,
+ B3_MA_TOVAL_RX2 = 0x01b5,
+ B3_MA_TOVAL_TX1 = 0x01b6,
+ B3_MA_TOVAL_TX2 = 0x01b7,
+ B3_MA_TO_CTRL = 0x01b8,
+ B3_MA_TO_TEST = 0x01ba,
+ B3_MA_RCINI_RX1 = 0x01c0,
+ B3_MA_RCINI_RX2 = 0x01c1,
+ B3_MA_RCINI_TX1 = 0x01c2,
+ B3_MA_RCINI_TX2 = 0x01c3,
+ B3_MA_RCVAL_RX1 = 0x01c4,
+ B3_MA_RCVAL_RX2 = 0x01c5,
+ B3_MA_RCVAL_TX1 = 0x01c6,
+ B3_MA_RCVAL_TX2 = 0x01c7,
+ B3_MA_RC_CTRL = 0x01c8,
+ B3_MA_RC_TEST = 0x01ca,
+ B3_PA_TOINI_RX1 = 0x01d0,
+ B3_PA_TOINI_RX2 = 0x01d4,
+ B3_PA_TOINI_TX1 = 0x01d8,
+ B3_PA_TOINI_TX2 = 0x01dc,
+ B3_PA_TOVAL_RX1 = 0x01e0,
+ B3_PA_TOVAL_RX2 = 0x01e4,
+ B3_PA_TOVAL_TX1 = 0x01e8,
+ B3_PA_TOVAL_TX2 = 0x01ec,
+ B3_PA_CTRL = 0x01f0,
+ B3_PA_TEST = 0x01f2,
+
+ Y2_CFG_SPC = 0x1c00,
+};
+
+/* B0_CTST 16 bit Control/Status register */
+enum {
+ Y2_VMAIN_AVAIL = 1<<17,/* VMAIN available (YUKON-2 only) */
+ Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */
+ Y2_ASF_ENABLE = 1<<13,/* ASF Unit Enable (YUKON-2 only) */
+ Y2_ASF_DISABLE = 1<<12,/* ASF Unit Disable (YUKON-2 only) */
+ Y2_CLK_RUN_ENA = 1<<11,/* CLK_RUN Enable (YUKON-2 only) */
+ Y2_CLK_RUN_DIS = 1<<10,/* CLK_RUN Disable (YUKON-2 only) */
+ Y2_LED_STAT_ON = 1<<9, /* Status LED On (YUKON-2 only) */
+ Y2_LED_STAT_OFF = 1<<8, /* Status LED Off (YUKON-2 only) */
+
+ CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */
+ CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */
+ CS_STOP_DONE = 1<<5, /* Stop Master is finished */
+ CS_STOP_MAST = 1<<4, /* Command Bit to stop the master */
+ CS_MRST_CLR = 1<<3, /* Clear Master reset */
+ CS_MRST_SET = 1<<2, /* Set Master reset */
+ CS_RST_CLR = 1<<1, /* Clear Software reset */
+ CS_RST_SET = 1, /* Set Software reset */
+};
+
+/* B0_LED 8 Bit LED register */
+enum {
+/* Bit 7.. 2: reserved */
+ LED_STAT_ON = 1<<1, /* Status LED on */
+ LED_STAT_OFF = 1, /* Status LED off */
+};
+
+/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
+enum {
+ PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */
+ PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */
+ PC_VCC_ENA = 1<<5, /* Switch VCC Enable */
+ PC_VCC_DIS = 1<<4, /* Switch VCC Disable */
+ PC_VAUX_ON = 1<<3, /* Switch VAUX On */
+ PC_VAUX_OFF = 1<<2, /* Switch VAUX Off */
+ PC_VCC_ON = 1<<1, /* Switch VCC On */
+ PC_VCC_OFF = 1<<0, /* Switch VCC Off */
+};
+
+/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
+
+/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */
+/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */
+/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */
+/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */
+enum {
+ Y2_IS_HW_ERR = 1<<31, /* Interrupt HW Error */
+ Y2_IS_STAT_BMU = 1<<30, /* Status BMU Interrupt */
+ Y2_IS_ASF = 1<<29, /* ASF subsystem Interrupt */
+
+ Y2_IS_POLL_CHK = 1<<27, /* Check IRQ from polling unit */
+ Y2_IS_TWSI_RDY = 1<<26, /* IRQ on end of TWSI Tx */
+ Y2_IS_IRQ_SW = 1<<25, /* SW forced IRQ */
+ Y2_IS_TIMINT = 1<<24, /* IRQ from Timer */
+
+ Y2_IS_IRQ_PHY2 = 1<<12, /* Interrupt from PHY 2 */
+ Y2_IS_IRQ_MAC2 = 1<<11, /* Interrupt from MAC 2 */
+ Y2_IS_CHK_RX2 = 1<<10, /* Descriptor error Rx 2 */
+ Y2_IS_CHK_TXS2 = 1<<9, /* Descriptor error TXS 2 */
+ Y2_IS_CHK_TXA2 = 1<<8, /* Descriptor error TXA 2 */
+
+ Y2_IS_IRQ_PHY1 = 1<<4, /* Interrupt from PHY 1 */
+ Y2_IS_IRQ_MAC1 = 1<<3, /* Interrupt from MAC 1 */
+ Y2_IS_CHK_RX1 = 1<<2, /* Descriptor error Rx 1 */
+ Y2_IS_CHK_TXS1 = 1<<1, /* Descriptor error TXS 1 */
+ Y2_IS_CHK_TXA1 = 1<<0, /* Descriptor error TXA 1 */
+
+ Y2_IS_BASE = Y2_IS_HW_ERR | Y2_IS_STAT_BMU |
+ Y2_IS_POLL_CHK | Y2_IS_TWSI_RDY |
+ Y2_IS_IRQ_SW | Y2_IS_TIMINT,
+ Y2_IS_PORT_1 = Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 |
+ Y2_IS_CHK_RX1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXS1,
+ Y2_IS_PORT_2 = Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 |
+ Y2_IS_CHK_RX2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_TXS2,
+};
+
+/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
+enum {
+ IS_ERR_MSK = 0x00003fff,/* All Error bits */
+
+ IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */
+ IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */
+ IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */
+ IS_IRQ_STAT = 1<<10, /* IRQ status exception */
+ IS_NO_STAT_M1 = 1<<9, /* No Rx Status from MAC 1 */
+ IS_NO_STAT_M2 = 1<<8, /* No Rx Status from MAC 2 */
+ IS_NO_TIST_M1 = 1<<7, /* No Time Stamp from MAC 1 */
+ IS_NO_TIST_M2 = 1<<6, /* No Time Stamp from MAC 2 */
+ IS_RAM_RD_PAR = 1<<5, /* RAM Read Parity Error */
+ IS_RAM_WR_PAR = 1<<4, /* RAM Write Parity Error */
+ IS_M1_PAR_ERR = 1<<3, /* MAC 1 Parity Error */
+ IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */
+ IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */
+ IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */
+};
+
+/* Hardware error interrupt mask for Yukon 2 */
+enum {
+ Y2_IS_TIST_OV = 1<<29,/* Time Stamp Timer overflow interrupt */
+ Y2_IS_SENSOR = 1<<28, /* Sensor interrupt */
+ Y2_IS_MST_ERR = 1<<27, /* Master error interrupt */
+ Y2_IS_IRQ_STAT = 1<<26, /* Status exception interrupt */
+ Y2_IS_PCI_EXP = 1<<25, /* PCI-Express interrupt */
+ Y2_IS_PCI_NEXP = 1<<24, /* PCI-Express error similar to PCI error */
+ /* Link 2 */
+ Y2_IS_PAR_RD2 = 1<<13, /* Read RAM parity error interrupt */
+ Y2_IS_PAR_WR2 = 1<<12, /* Write RAM parity error interrupt */
+ Y2_IS_PAR_MAC2 = 1<<11, /* MAC hardware fault interrupt */
+ Y2_IS_PAR_RX2 = 1<<10, /* Parity Error Rx Queue 2 */
+ Y2_IS_TCP_TXS2 = 1<<9, /* TCP length mismatch sync Tx queue IRQ */
+ Y2_IS_TCP_TXA2 = 1<<8, /* TCP length mismatch async Tx queue IRQ */
+ /* Link 1 */
+ Y2_IS_PAR_RD1 = 1<<5, /* Read RAM parity error interrupt */
+ Y2_IS_PAR_WR1 = 1<<4, /* Write RAM parity error interrupt */
+ Y2_IS_PAR_MAC1 = 1<<3, /* MAC hardware fault interrupt */
+ Y2_IS_PAR_RX1 = 1<<2, /* Parity Error Rx Queue 1 */
+ Y2_IS_TCP_TXS1 = 1<<1, /* TCP length mismatch sync Tx queue IRQ */
+ Y2_IS_TCP_TXA1 = 1<<0, /* TCP length mismatch async Tx queue IRQ */
+
+ Y2_HWE_L1_MASK = Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 |
+ Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1,
+ Y2_HWE_L2_MASK = Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 |
+ Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2,
+
+ Y2_HWE_ALL_MASK = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT |
+ Y2_IS_PCI_EXP |
+ Y2_HWE_L1_MASK | Y2_HWE_L2_MASK,
+};
+
+/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
+enum {
+ DPT_START = 1<<1,
+ DPT_STOP = 1<<0,
+};
+
+/* B2_TST_CTRL1 8 bit Test Control Register 1 */
+enum {
+ TST_FRC_DPERR_MR = 1<<7, /* force DATAPERR on MST RD */
+ TST_FRC_DPERR_MW = 1<<6, /* force DATAPERR on MST WR */
+ TST_FRC_DPERR_TR = 1<<5, /* force DATAPERR on TRG RD */
+ TST_FRC_DPERR_TW = 1<<4, /* force DATAPERR on TRG WR */
+ TST_FRC_APERR_M = 1<<3, /* force ADDRPERR on MST */
+ TST_FRC_APERR_T = 1<<2, /* force ADDRPERR on TRG */
+ TST_CFG_WRITE_ON = 1<<1, /* Enable Config Reg WR */
+ TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */
+};
+
+/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
+enum {
+ CFG_CHIP_R_MSK = 0xf<<4, /* Bit 7.. 4: Chip Revision */
+ /* Bit 3.. 2: reserved */
+ CFG_DIS_M2_CLK = 1<<1, /* Disable Clock for 2nd MAC */
+ CFG_SNG_MAC = 1<<0, /* MAC Config: 0=2 MACs / 1=1 MAC*/
+};
+
+/* B2_CHIP_ID 8 bit Chip Identification Number */
+enum {
+ CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */
+ CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */
+ CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */
+ CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */
+ CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */
+ CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */
+ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */
+ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */
+
+ CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
+ CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */
+ CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */
+};
+
+/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
+enum {
+ Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactive (0 = active) */
+ Y2_CLK_GAT_LNK2_DIS = 1<<6, /* Disable clock gating Link 2 */
+ Y2_COR_CLK_LNK2_DIS = 1<<5, /* Disable Core clock Link 2 */
+ Y2_PCI_CLK_LNK2_DIS = 1<<4, /* Disable PCI clock Link 2 */
+ Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactive (0 = active) */
+ Y2_CLK_GAT_LNK1_DIS = 1<<2, /* Disable clock gating Link 1 */
+ Y2_COR_CLK_LNK1_DIS = 1<<1, /* Disable Core clock Link 1 */
+ Y2_PCI_CLK_LNK1_DIS = 1<<0, /* Disable PCI clock Link 1 */
+};
+
+/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */
+enum {
+ CFG_LED_MODE_MSK = 7<<2, /* Bit 4.. 2: LED Mode Mask */
+ CFG_LINK_2_AVAIL = 1<<1, /* Link 2 available */
+ CFG_LINK_1_AVAIL = 1<<0, /* Link 1 available */
+};
+#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2)
+#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL)
+
+
+/* B2_Y2_CLK_CTRL 32 bit Clock Frequency Control Register (Yukon-2/EC) */
+enum {
+ Y2_CLK_DIV_VAL_MSK = 0xff<<16,/* Bit 23..16: Clock Divisor Value */
+#define Y2_CLK_DIV_VAL(x) (((x)<<16) & Y2_CLK_DIV_VAL_MSK)
+ Y2_CLK_DIV_VAL2_MSK = 7<<21, /* Bit 23..21: Clock Divisor Value */
+ Y2_CLK_SELECT2_MSK = 0x1f<<16,/* Bit 20..16: Clock Select */
+#define Y2_CLK_DIV_VAL_2(x) (((x)<<21) & Y2_CLK_DIV_VAL2_MSK)
+#define Y2_CLK_SEL_VAL_2(x) (((x)<<16) & Y2_CLK_SELECT2_MSK)
+ Y2_CLK_DIV_ENA = 1<<1, /* Enable Core Clock Division */
+ Y2_CLK_DIV_DIS = 1<<0, /* Disable Core Clock Division */
+};
+
+/* B2_TI_CTRL 8 bit Timer control */
+/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
+enum {
+ TIM_START = 1<<2, /* Start Timer */
+ TIM_STOP = 1<<1, /* Stop Timer */
+ TIM_CLR_IRQ = 1<<0, /* Clear Timer IRQ (!IRQM) */
+};
+
+/* B2_TI_TEST 8 Bit Timer Test */
+/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
+/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
+enum {
+ TIM_T_ON = 1<<2, /* Test mode on */
+ TIM_T_OFF = 1<<1, /* Test mode off */
+ TIM_T_STEP = 1<<0, /* Test step */
+};
+
+/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
+ /* Bit 31..19: reserved */
+#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
+/* RAM Interface Registers */
+
+/* B3_RI_CTRL 16 bit RAM Interface Control Register */
+enum {
+ RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */
+ RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/
+
+ RI_RST_CLR = 1<<1, /* Clear RAM Interface Reset */
+ RI_RST_SET = 1<<0, /* Set RAM Interface Reset */
+};
+
+#define SK_RI_TO_53 36 /* RAM interface timeout */
+
+
+/* Port related registers FIFO, and Arbiter */
+#define SK_REG(port,reg) (((port)<<7)+(reg))
+
+/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */
+/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
+/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
+/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
+/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
+
+#define TXA_MAX_VAL 0x00ffffffUL /* Bit 23.. 0: Max TXA Timer/Cnt Val */
+
+/* TXA_CTRL 8 bit Tx Arbiter Control Register */
+enum {
+ TXA_ENA_FSYNC = 1<<7, /* Enable force of sync Tx queue */
+ TXA_DIS_FSYNC = 1<<6, /* Disable force of sync Tx queue */
+ TXA_ENA_ALLOC = 1<<5, /* Enable alloc of free bandwidth */
+ TXA_DIS_ALLOC = 1<<4, /* Disable alloc of free bandwidth */
+ TXA_START_RC = 1<<3, /* Start sync Rate Control */
+ TXA_STOP_RC = 1<<2, /* Stop sync Rate Control */
+ TXA_ENA_ARB = 1<<1, /* Enable Tx Arbiter */
+ TXA_DIS_ARB = 1<<0, /* Disable Tx Arbiter */
+};
+
+/*
+ * Bank 4 - 5
+ */
+/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */
+enum {
+ TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/
+ TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */
+ TXA_LIM_INI = 0x0208,/* 32 bit Tx Arb Limit Counter Init Val */
+ TXA_LIM_VAL = 0x020c,/* 32 bit Tx Arb Limit Counter Value */
+ TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */
+ TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */
+ TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */
+};
+
+
+enum {
+ B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */
+ B7_CFG_SPC = 0x0380,/* copy of the Configuration register */
+ B8_RQ1_REGS = 0x0400,/* Receive Queue 1 */
+ B8_RQ2_REGS = 0x0480,/* Receive Queue 2 */
+ B8_TS1_REGS = 0x0600,/* Transmit sync queue 1 */
+ B8_TA1_REGS = 0x0680,/* Transmit async queue 1 */
+ B8_TS2_REGS = 0x0700,/* Transmit sync queue 2 */
+ B8_TA2_REGS = 0x0780,/* Transmit sync queue 2 */
+ B16_RAM_REGS = 0x0800,/* RAM Buffer Registers */
+};
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+enum {
+ B8_Q_REGS = 0x0400, /* base of Queue registers */
+ Q_D = 0x00, /* 8*32 bit Current Descriptor */
+ Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */
+ Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */
+ Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */
+ Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */
+ Q_BC = 0x30, /* 32 bit Current Byte Counter */
+ Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */
+ Q_F = 0x38, /* 32 bit Flag Register */
+ Q_T1 = 0x3c, /* 32 bit Test Register 1 */
+ Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */
+ Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */
+ Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */
+ Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */
+ Q_T2 = 0x40, /* 32 bit Test Register 2 */
+ Q_T3 = 0x44, /* 32 bit Test Register 3 */
+
+/* Yukon-2 */
+ Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */
+ Q_WM = 0x40, /* 16 bit FIFO Watermark */
+ Q_AL = 0x42, /* 8 bit FIFO Alignment */
+ Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */
+ Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */
+ Q_RP = 0x48, /* 8 bit FIFO Read Pointer */
+ Q_RL = 0x4a, /* 8 bit FIFO Read Level */
+ Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */
+ Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */
+ Q_WL = 0x4e, /* 8 bit FIFO Write Level */
+ Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */
+};
+#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
+
+
+/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
+enum {
+ Y2_B8_PREF_REGS = 0x0450,
+
+ PREF_UNIT_CTRL = 0x00, /* 32 bit Control register */
+ PREF_UNIT_LAST_IDX = 0x04, /* 16 bit Last Index */
+ PREF_UNIT_ADDR_LO = 0x08, /* 32 bit List start addr, low part */
+ PREF_UNIT_ADDR_HI = 0x0c, /* 32 bit List start addr, high part*/
+ PREF_UNIT_GET_IDX = 0x10, /* 16 bit Get Index */
+ PREF_UNIT_PUT_IDX = 0x14, /* 16 bit Put Index */
+ PREF_UNIT_FIFO_WP = 0x20, /* 8 bit FIFO write pointer */
+ PREF_UNIT_FIFO_RP = 0x24, /* 8 bit FIFO read pointer */
+ PREF_UNIT_FIFO_WM = 0x28, /* 8 bit FIFO watermark */
+ PREF_UNIT_FIFO_LEV = 0x2c, /* 8 bit FIFO level */
+
+ PREF_UNIT_MASK_IDX = 0x0fff,
+};
+#define Y2_QADDR(q,reg) (Y2_B8_PREF_REGS + (q) + (reg))
+
+/* RAM Buffer Register Offsets */
+enum {
+
+ RB_START = 0x00,/* 32 bit RAM Buffer Start Address */
+ RB_END = 0x04,/* 32 bit RAM Buffer End Address */
+ RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */
+ RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */
+ RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */
+ RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */
+ RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */
+ RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */
+ /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */
+ RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */
+ RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */
+ RB_CTRL = 0x28,/* 32 bit RAM Buffer Control Register */
+ RB_TST1 = 0x29,/* 8 bit RAM Buffer Test Register 1 */
+ RB_TST2 = 0x2a,/* 8 bit RAM Buffer Test Register 2 */
+};
+
+/* Receive and Transmit Queues */
+enum {
+ Q_R1 = 0x0000, /* Receive Queue 1 */
+ Q_R2 = 0x0080, /* Receive Queue 2 */
+ Q_XS1 = 0x0200, /* Synchronous Transmit Queue 1 */
+ Q_XA1 = 0x0280, /* Asynchronous Transmit Queue 1 */
+ Q_XS2 = 0x0300, /* Synchronous Transmit Queue 2 */
+ Q_XA2 = 0x0380, /* Asynchronous Transmit Queue 2 */
+};
+
+/* Different PHY Types */
+enum {
+ PHY_ADDR_MARV = 0,
+};
+
+#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs))
+
+
+enum {
+ LNK_SYNC_INI = 0x0c30,/* 32 bit Link Sync Cnt Init Value */
+ LNK_SYNC_VAL = 0x0c34,/* 32 bit Link Sync Cnt Current Value */
+ LNK_SYNC_CTRL = 0x0c38,/* 8 bit Link Sync Cnt Control Register */
+ LNK_SYNC_TST = 0x0c39,/* 8 bit Link Sync Cnt Test Register */
+
+ LNK_LED_REG = 0x0c3c,/* 8 bit Link LED Register */
+
+/* Receive GMAC FIFO (YUKON and Yukon-2) */
+
+ RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */
+ RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */
+ RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */
+ RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */
+ RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */
+ RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */
+ RX_GMF_UP_THR = 0x0c58,/* 8 bit Rx Upper Pause Thr (Yukon-EC_U) */
+ RX_GMF_LP_THR = 0x0c5a,/* 8 bit Rx Lower Pause Thr (Yukon-EC_U) */
+ RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */
+ RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */
+
+ RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */
+
+ RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */
+
+ RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */
+};
+
+
+/* Q_BC 32 bit Current Byte Counter */
+
+/* BMU Control Status Registers */
+/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */
+/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */
+/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
+/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */
+/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
+/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */
+/* Q_CSR 32 bit BMU Control/Status Register */
+
+/* Rx BMU Control / Status Registers (Yukon-2) */
+enum {
+ BMU_IDLE = 1<<31, /* BMU Idle State */
+ BMU_RX_TCP_PKT = 1<<30, /* Rx TCP Packet (when RSS Hash enabled) */
+ BMU_RX_IP_PKT = 1<<29, /* Rx IP Packet (when RSS Hash enabled) */
+
+ BMU_ENA_RX_RSS_HASH = 1<<15, /* Enable Rx RSS Hash */
+ BMU_DIS_RX_RSS_HASH = 1<<14, /* Disable Rx RSS Hash */
+ BMU_ENA_RX_CHKSUM = 1<<13, /* Enable Rx TCP/IP Checksum Check */
+ BMU_DIS_RX_CHKSUM = 1<<12, /* Disable Rx TCP/IP Checksum Check */
+ BMU_CLR_IRQ_PAR = 1<<11, /* Clear IRQ on Parity errors (Rx) */
+ BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment. error (Tx) */
+ BMU_CLR_IRQ_CHK = 1<<10, /* Clear IRQ Check */
+ BMU_STOP = 1<<9, /* Stop Rx/Tx Queue */
+ BMU_START = 1<<8, /* Start Rx/Tx Queue */
+ BMU_FIFO_OP_ON = 1<<7, /* FIFO Operational On */
+ BMU_FIFO_OP_OFF = 1<<6, /* FIFO Operational Off */
+ BMU_FIFO_ENA = 1<<5, /* Enable FIFO */
+ BMU_FIFO_RST = 1<<4, /* Reset FIFO */
+ BMU_OP_ON = 1<<3, /* BMU Operational On */
+ BMU_OP_OFF = 1<<2, /* BMU Operational Off */
+ BMU_RST_CLR = 1<<1, /* Clear BMU Reset (Enable) */
+ BMU_RST_SET = 1<<0, /* Set BMU Reset */
+
+ BMU_CLR_RESET = BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR,
+ BMU_OPER_INIT = BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START |
+ BMU_FIFO_ENA | BMU_OP_ON,
+
+ BMU_WM_DEFAULT = 0x600,
+};
+
+/* Tx BMU Control / Status Registers (Yukon-2) */
+ /* Bit 31: same as for Rx */
+enum {
+ BMU_TX_IPIDINCR_ON = 1<<13, /* Enable IP ID Increment */
+ BMU_TX_IPIDINCR_OFF = 1<<12, /* Disable IP ID Increment */
+ BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment length mismatch */
+};
+
+/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
+/* PREF_UNIT_CTRL 32 bit Prefetch Control register */
+enum {
+ PREF_UNIT_OP_ON = 1<<3, /* prefetch unit operational */
+ PREF_UNIT_OP_OFF = 1<<2, /* prefetch unit not operational */
+ PREF_UNIT_RST_CLR = 1<<1, /* Clear Prefetch Unit Reset */
+ PREF_UNIT_RST_SET = 1<<0, /* Set Prefetch Unit Reset */
+};
+
+/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
+/* RB_START 32 bit RAM Buffer Start Address */
+/* RB_END 32 bit RAM Buffer End Address */
+/* RB_WP 32 bit RAM Buffer Write Pointer */
+/* RB_RP 32 bit RAM Buffer Read Pointer */
+/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
+/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
+/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
+/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
+/* RB_PC 32 bit RAM Buffer Packet Counter */
+/* RB_LEV 32 bit RAM Buffer Level Register */
+
+#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
+/* RB_TST2 8 bit RAM Buffer Test Register 2 */
+/* RB_TST1 8 bit RAM Buffer Test Register 1 */
+
+/* RB_CTRL 8 bit RAM Buffer Control Register */
+enum {
+ RB_ENA_STFWD = 1<<5, /* Enable Store & Forward */
+ RB_DIS_STFWD = 1<<4, /* Disable Store & Forward */
+ RB_ENA_OP_MD = 1<<3, /* Enable Operation Mode */
+ RB_DIS_OP_MD = 1<<2, /* Disable Operation Mode */
+ RB_RST_CLR = 1<<1, /* Clear RAM Buf STM Reset */
+ RB_RST_SET = 1<<0, /* Set RAM Buf STM Reset */
+};
+
+
+/* Transmit GMAC FIFO (YUKON only) */
+enum {
+ TX_GMF_EA = 0x0d40,/* 32 bit Tx GMAC FIFO End Address */
+ TX_GMF_AE_THR = 0x0d44,/* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
+ TX_GMF_CTRL_T = 0x0d48,/* 32 bit Tx GMAC FIFO Control/Test */
+
+ TX_GMF_WP = 0x0d60,/* 32 bit Tx GMAC FIFO Write Pointer */
+ TX_GMF_WSP = 0x0d64,/* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
+ TX_GMF_WLEV = 0x0d68,/* 32 bit Tx GMAC FIFO Write Level */
+
+ TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */
+ TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */
+ TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */
+};
+
+/* Descriptor Poll Timer Registers */
+enum {
+ B28_DPT_INI = 0x0e00,/* 24 bit Descriptor Poll Timer Init Val */
+ B28_DPT_VAL = 0x0e04,/* 24 bit Descriptor Poll Timer Curr Val */
+ B28_DPT_CTRL = 0x0e08,/* 8 bit Descriptor Poll Timer Ctrl Reg */
+
+ B28_DPT_TST = 0x0e0a,/* 8 bit Descriptor Poll Timer Test Reg */
+};
+
+/* Time Stamp Timer Registers (YUKON only) */
+enum {
+ GMAC_TI_ST_VAL = 0x0e14,/* 32 bit Time Stamp Timer Curr Val */
+ GMAC_TI_ST_CTRL = 0x0e18,/* 8 bit Time Stamp Timer Ctrl Reg */
+ GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */
+};
+
+/* Polling Unit Registers (Yukon-2 only) */
+enum {
+ POLL_CTRL = 0x0e20, /* 32 bit Polling Unit Control Reg */
+ POLL_LAST_IDX = 0x0e24,/* 16 bit Polling Unit List Last Index */
+
+ POLL_LIST_ADDR_LO= 0x0e28,/* 32 bit Poll. List Start Addr (low) */
+ POLL_LIST_ADDR_HI= 0x0e2c,/* 32 bit Poll. List Start Addr (high) */
+};
+
+/* ASF Subsystem Registers (Yukon-2 only) */
+enum {
+ B28_Y2_SMB_CONFIG = 0x0e40,/* 32 bit ASF SMBus Config Register */
+ B28_Y2_SMB_CSD_REG = 0x0e44,/* 32 bit ASF SMB Control/Status/Data */
+ B28_Y2_ASF_IRQ_V_BASE=0x0e60,/* 32 bit ASF IRQ Vector Base */
+
+ B28_Y2_ASF_STAT_CMD= 0x0e68,/* 32 bit ASF Status and Command Reg */
+ B28_Y2_ASF_HOST_COM= 0x0e6c,/* 32 bit ASF Host Communication Reg */
+ B28_Y2_DATA_REG_1 = 0x0e70,/* 32 bit ASF/Host Data Register 1 */
+ B28_Y2_DATA_REG_2 = 0x0e74,/* 32 bit ASF/Host Data Register 2 */
+ B28_Y2_DATA_REG_3 = 0x0e78,/* 32 bit ASF/Host Data Register 3 */
+ B28_Y2_DATA_REG_4 = 0x0e7c,/* 32 bit ASF/Host Data Register 4 */
+};
+
+/* Status BMU Registers (Yukon-2 only)*/
+enum {
+ STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */
+ STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */
+
+ STAT_LIST_ADDR_LO= 0x0e88,/* 32 bit Status List Start Addr (low) */
+ STAT_LIST_ADDR_HI= 0x0e8c,/* 32 bit Status List Start Addr (high) */
+ STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */
+ STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */
+ STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */
+ STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */
+ STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */
+ STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */
+
+/* FIFO Control/Status Registers (Yukon-2 only)*/
+ STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */
+ STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */
+ STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */
+ STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */
+ STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */
+ STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */
+ STAT_FIFO_ISR_WM= 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */
+
+/* Level and ISR Timer Registers (Yukon-2 only)*/
+ STAT_LEV_TIMER_INI= 0x0eb0,/* 32 bit Level Timer Init. Value Reg */
+ STAT_LEV_TIMER_CNT= 0x0eb4,/* 32 bit Level Timer Counter Reg */
+ STAT_LEV_TIMER_CTRL= 0x0eb8,/* 8 bit Level Timer Control Reg */
+ STAT_LEV_TIMER_TEST= 0x0eb9,/* 8 bit Level Timer Test Reg */
+ STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */
+ STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */
+ STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */
+ STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */
+ STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */
+ STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */
+ STAT_ISR_TIMER_CTRL= 0x0ed8,/* 8 bit ISR Timer Control Reg */
+ STAT_ISR_TIMER_TEST= 0x0ed9,/* 8 bit ISR Timer Test Reg */
+};
+
+enum {
+ LINKLED_OFF = 0x01,
+ LINKLED_ON = 0x02,
+ LINKLED_LINKSYNC_OFF = 0x04,
+ LINKLED_LINKSYNC_ON = 0x08,
+ LINKLED_BLINK_OFF = 0x10,
+ LINKLED_BLINK_ON = 0x20,
+};
+
+/* GMAC and GPHY Control Registers (YUKON only) */
+enum {
+ GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */
+ GPHY_CTRL = 0x0f04,/* 32 bit GPHY Control Reg */
+ GMAC_IRQ_SRC = 0x0f08,/* 8 bit GMAC Interrupt Source Reg */
+ GMAC_IRQ_MSK = 0x0f0c,/* 8 bit GMAC Interrupt Mask Reg */
+ GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */
+
+/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
+
+ WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */
+
+ WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */
+ WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */
+ WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */
+ WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */
+ WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */
+ WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */
+ WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */
+
+/* WOL Pattern Length Registers (YUKON only) */
+
+ WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */
+ WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */
+
+/* WOL Pattern Counter Registers (YUKON only) */
+
+
+ WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */
+ WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */
+};
+
+enum {
+ WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */
+ WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */
+};
+
+enum {
+ BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */
+ BASE_GMAC_2 = 0x3800,/* GMAC 2 registers */
+};
+
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+enum {
+ PHY_MARV_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
+ PHY_MARV_STAT = 0x01,/* 16 bit r/o PHY Status Register */
+ PHY_MARV_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
+ PHY_MARV_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
+ PHY_MARV_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
+ PHY_MARV_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */
+ PHY_MARV_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
+ PHY_MARV_NEPG = 0x07,/* 16 bit r/w Next Page Register */
+ PHY_MARV_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */
+ /* Marvel-specific registers */
+ PHY_MARV_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
+ PHY_MARV_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
+ PHY_MARV_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */
+ PHY_MARV_PHY_CTRL = 0x10,/* 16 bit r/w PHY Specific Ctrl Reg */
+ PHY_MARV_PHY_STAT = 0x11,/* 16 bit r/o PHY Specific Stat Reg */
+ PHY_MARV_INT_MASK = 0x12,/* 16 bit r/w Interrupt Mask Reg */
+ PHY_MARV_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */
+ PHY_MARV_EXT_CTRL = 0x14,/* 16 bit r/w Ext. PHY Specific Ctrl */
+ PHY_MARV_RXE_CNT = 0x15,/* 16 bit r/w Receive Error Counter */
+ PHY_MARV_EXT_ADR = 0x16,/* 16 bit r/w Ext. Ad. for Cable Diag. */
+ PHY_MARV_PORT_IRQ = 0x17,/* 16 bit r/o Port 0 IRQ (88E1111 only) */
+ PHY_MARV_LED_CTRL = 0x18,/* 16 bit r/w LED Control Reg */
+ PHY_MARV_LED_OVER = 0x19,/* 16 bit r/w Manual LED Override Reg */
+ PHY_MARV_EXT_CTRL_2 = 0x1a,/* 16 bit r/w Ext. PHY Specific Ctrl 2 */
+ PHY_MARV_EXT_P_STAT = 0x1b,/* 16 bit r/w Ext. PHY Spec. Stat Reg */
+ PHY_MARV_CABLE_DIAG = 0x1c,/* 16 bit r/o Cable Diagnostic Reg */
+ PHY_MARV_PAGE_ADDR = 0x1d,/* 16 bit r/w Extended Page Address Reg */
+ PHY_MARV_PAGE_DATA = 0x1e,/* 16 bit r/w Extended Page Data Reg */
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+ PHY_MARV_FE_LED_PAR = 0x16,/* 16 bit r/w LED Parallel Select Reg. */
+ PHY_MARV_FE_LED_SER = 0x17,/* 16 bit r/w LED Stream Select S. LED */
+ PHY_MARV_FE_VCT_TX = 0x1a,/* 16 bit r/w VCT Reg. for TXP/N Pins */
+ PHY_MARV_FE_VCT_RX = 0x1b,/* 16 bit r/o VCT Reg. for RXP/N Pins */
+ PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */
+};
+
+enum {
+ PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */
+ PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */
+ PHY_CT_SPS_LSB = 1<<13, /* Bit 13: Speed select, lower bit */
+ PHY_CT_ANE = 1<<12, /* Bit 12: Auto-Negotiation Enabled */
+ PHY_CT_PDOWN = 1<<11, /* Bit 11: Power Down Mode */
+ PHY_CT_ISOL = 1<<10, /* Bit 10: Isolate Mode */
+ PHY_CT_RE_CFG = 1<<9, /* Bit 9: (sc) Restart Auto-Negotiation */
+ PHY_CT_DUP_MD = 1<<8, /* Bit 8: Duplex Mode */
+ PHY_CT_COL_TST = 1<<7, /* Bit 7: Collision Test enabled */
+ PHY_CT_SPS_MSB = 1<<6, /* Bit 6: Speed select, upper bit */
+};
+
+enum {
+ PHY_CT_SP1000 = PHY_CT_SPS_MSB, /* enable speed of 1000 Mbps */
+ PHY_CT_SP100 = PHY_CT_SPS_LSB, /* enable speed of 100 Mbps */
+ PHY_CT_SP10 = 0, /* enable speed of 10 Mbps */
+};
+
+enum {
+ PHY_ST_EXT_ST = 1<<8, /* Bit 8: Extended Status Present */
+
+ PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */
+ PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */
+ PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */
+ PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */
+ PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */
+ PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */
+ PHY_ST_EXT_REG = 1<<0, /* Bit 0: Extended Register available */
+};
+
+enum {
+ PHY_I1_OUI_MSK = 0x3f<<10, /* Bit 15..10: Organization Unique ID */
+ PHY_I1_MOD_NUM = 0x3f<<4, /* Bit 9.. 4: Model Number */
+ PHY_I1_REV_MSK = 0xf, /* Bit 3.. 0: Revision Number */
+};
+
+/* different Marvell PHY Ids */
+enum {
+ PHY_MARV_ID0_VAL= 0x0141, /* Marvell Unique Identifier */
+
+ PHY_BCOM_ID1_A1 = 0x6041,
+ PHY_BCOM_ID1_B2 = 0x6043,
+ PHY_BCOM_ID1_C0 = 0x6044,
+ PHY_BCOM_ID1_C5 = 0x6047,
+
+ PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
+ PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
+ PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
+ PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+};
+
+/* Advertisement register bits */
+enum {
+ PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */
+ PHY_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */
+ PHY_AN_RF = 1<<13, /* Bit 13: Remote Fault Bits */
+
+ PHY_AN_PAUSE_ASYM = 1<<11,/* Bit 11: Try for asymmetric */
+ PHY_AN_PAUSE_CAP = 1<<10, /* Bit 10: Try for pause */
+ PHY_AN_100BASE4 = 1<<9, /* Bit 9: Try for 100mbps 4k packets */
+ PHY_AN_100FULL = 1<<8, /* Bit 8: Try for 100mbps full-duplex */
+ PHY_AN_100HALF = 1<<7, /* Bit 7: Try for 100mbps half-duplex */
+ PHY_AN_10FULL = 1<<6, /* Bit 6: Try for 10mbps full-duplex */
+ PHY_AN_10HALF = 1<<5, /* Bit 5: Try for 10mbps half-duplex */
+ PHY_AN_CSMA = 1<<0, /* Bit 0: Only selector supported */
+ PHY_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
+ PHY_AN_FULL = PHY_AN_100FULL | PHY_AN_10FULL | PHY_AN_CSMA,
+ PHY_AN_ALL = PHY_AN_10HALF | PHY_AN_10FULL |
+ PHY_AN_100HALF | PHY_AN_100FULL,
+};
+
+/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+enum {
+ PHY_B_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */
+ PHY_B_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */
+ PHY_B_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */
+ PHY_B_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */
+ PHY_B_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */
+ PHY_B_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */
+ /* Bit 9..8: reserved */
+ PHY_B_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */
+};
+
+/** Marvell-Specific */
+enum {
+ PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */
+ PHY_M_AN_ACK = 1<<14, /* (ro) Acknowledge Received */
+ PHY_M_AN_RF = 1<<13, /* Remote Fault */
+
+ PHY_M_AN_ASP = 1<<11, /* Asymmetric Pause */
+ PHY_M_AN_PC = 1<<10, /* MAC Pause implemented */
+ PHY_M_AN_100_T4 = 1<<9, /* Not cap. 100Base-T4 (always 0) */
+ PHY_M_AN_100_FD = 1<<8, /* Advertise 100Base-TX Full Duplex */
+ PHY_M_AN_100_HD = 1<<7, /* Advertise 100Base-TX Half Duplex */
+ PHY_M_AN_10_FD = 1<<6, /* Advertise 10Base-TX Full Duplex */
+ PHY_M_AN_10_HD = 1<<5, /* Advertise 10Base-TX Half Duplex */
+ PHY_M_AN_SEL_MSK =0x1f<<4, /* Bit 4.. 0: Selector Field Mask */
+};
+
+/* special defines for FIBER (88E1011S only) */
+enum {
+ PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */
+ PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */
+ PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */
+ PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */
+};
+
+/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
+enum {
+ PHY_M_P_NO_PAUSE_X = 0<<7,/* Bit 8.. 7: no Pause Mode */
+ PHY_M_P_SYM_MD_X = 1<<7, /* Bit 8.. 7: symmetric Pause Mode */
+ PHY_M_P_ASYM_MD_X = 2<<7,/* Bit 8.. 7: asymmetric Pause Mode */
+ PHY_M_P_BOTH_MD_X = 3<<7,/* Bit 8.. 7: both Pause Mode */
+};
+
+/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+enum {
+ PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */
+ PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */
+ PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */
+ PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */
+ PHY_M_1000C_AFD = 1<<9, /* Advertise Full Duplex */
+ PHY_M_1000C_AHD = 1<<8, /* Advertise Half Duplex */
+};
+
+/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/
+enum {
+ PHY_M_PC_TX_FFD_MSK = 3<<14,/* Bit 15..14: Tx FIFO Depth Mask */
+ PHY_M_PC_RX_FFD_MSK = 3<<12,/* Bit 13..12: Rx FIFO Depth Mask */
+ PHY_M_PC_ASS_CRS_TX = 1<<11, /* Assert CRS on Transmit */
+ PHY_M_PC_FL_GOOD = 1<<10, /* Force Link Good */
+ PHY_M_PC_EN_DET_MSK = 3<<8,/* Bit 9.. 8: Energy Detect Mask */
+ PHY_M_PC_ENA_EXT_D = 1<<7, /* Enable Ext. Distance (10BT) */
+ PHY_M_PC_MDIX_MSK = 3<<5,/* Bit 6.. 5: MDI/MDIX Config. Mask */
+ PHY_M_PC_DIS_125CLK = 1<<4, /* Disable 125 CLK */
+ PHY_M_PC_MAC_POW_UP = 1<<3, /* MAC Power up */
+ PHY_M_PC_SQE_T_ENA = 1<<2, /* SQE Test Enabled */
+ PHY_M_PC_POL_R_DIS = 1<<1, /* Polarity Reversal Disabled */
+ PHY_M_PC_DIS_JABBER = 1<<0, /* Disable Jabber */
+};
+
+enum {
+ PHY_M_PC_EN_DET = 2<<8, /* Energy Detect (Mode 1) */
+ PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */
+};
+
+#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK)
+
+enum {
+ PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */
+ PHY_M_PC_MAN_MDIX = 1, /* 01 = Manual MDIX configuration */
+ PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */
+};
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+enum {
+ PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */
+ PHY_M_PC_ENA_ENE_DT = 1<<14, /* Enable Energy Detect (sense & pulse) */
+ PHY_M_PC_DIS_NLP_CK = 1<<13, /* Disable Normal Link Puls (NLP) Check */
+ PHY_M_PC_ENA_LIP_NP = 1<<12, /* Enable Link Partner Next Page Reg. */
+ PHY_M_PC_DIS_NLP_GN = 1<<11, /* Disable Normal Link Puls Generation */
+
+ PHY_M_PC_DIS_SCRAMB = 1<<9, /* Disable Scrambler */
+ PHY_M_PC_DIS_FEFI = 1<<8, /* Disable Far End Fault Indic. (FEFI) */
+
+ PHY_M_PC_SH_TP_SEL = 1<<6, /* Shielded Twisted Pair Select */
+ PHY_M_PC_RX_FD_MSK = 3<<2,/* Bit 3.. 2: Rx FIFO Depth Mask */
+};
+
+/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/
+enum {
+ PHY_M_PS_SPEED_MSK = 3<<14, /* Bit 15..14: Speed Mask */
+ PHY_M_PS_SPEED_1000 = 1<<15, /* 10 = 1000 Mbps */
+ PHY_M_PS_SPEED_100 = 1<<14, /* 01 = 100 Mbps */
+ PHY_M_PS_SPEED_10 = 0, /* 00 = 10 Mbps */
+ PHY_M_PS_FULL_DUP = 1<<13, /* Full Duplex */
+ PHY_M_PS_PAGE_REC = 1<<12, /* Page Received */
+ PHY_M_PS_SPDUP_RES = 1<<11, /* Speed & Duplex Resolved */
+ PHY_M_PS_LINK_UP = 1<<10, /* Link Up */
+ PHY_M_PS_CABLE_MSK = 7<<7, /* Bit 9.. 7: Cable Length Mask */
+ PHY_M_PS_MDI_X_STAT = 1<<6, /* MDI Crossover Stat (1=MDIX) */
+ PHY_M_PS_DOWNS_STAT = 1<<5, /* Downshift Status (1=downsh.) */
+ PHY_M_PS_ENDET_STAT = 1<<4, /* Energy Detect Status (1=act) */
+ PHY_M_PS_TX_P_EN = 1<<3, /* Tx Pause Enabled */
+ PHY_M_PS_RX_P_EN = 1<<2, /* Rx Pause Enabled */
+ PHY_M_PS_POL_REV = 1<<1, /* Polarity Reversed */
+ PHY_M_PS_JABBER = 1<<0, /* Jabber */
+};
+
+#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+enum {
+ PHY_M_PS_DTE_DETECT = 1<<15, /* Data Terminal Equipment (DTE) Detected */
+ PHY_M_PS_RES_SPEED = 1<<14, /* Resolved Speed (1=100 Mbps, 0=10 Mbps */
+};
+
+enum {
+ PHY_M_IS_AN_ERROR = 1<<15, /* Auto-Negotiation Error */
+ PHY_M_IS_LSP_CHANGE = 1<<14, /* Link Speed Changed */
+ PHY_M_IS_DUP_CHANGE = 1<<13, /* Duplex Mode Changed */
+ PHY_M_IS_AN_PR = 1<<12, /* Page Received */
+ PHY_M_IS_AN_COMPL = 1<<11, /* Auto-Negotiation Completed */
+ PHY_M_IS_LST_CHANGE = 1<<10, /* Link Status Changed */
+ PHY_M_IS_SYMB_ERROR = 1<<9, /* Symbol Error */
+ PHY_M_IS_FALSE_CARR = 1<<8, /* False Carrier */
+ PHY_M_IS_FIFO_ERROR = 1<<7, /* FIFO Overflow/Underrun Error */
+ PHY_M_IS_MDI_CHANGE = 1<<6, /* MDI Crossover Changed */
+ PHY_M_IS_DOWNSH_DET = 1<<5, /* Downshift Detected */
+ PHY_M_IS_END_CHANGE = 1<<4, /* Energy Detect Changed */
+
+ PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */
+ PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */
+ PHY_M_IS_JABBER = 1<<0, /* Jabber */
+
+ PHY_M_DEF_MSK = PHY_M_IS_LSP_CHANGE | PHY_M_IS_LST_CHANGE
+ | PHY_M_IS_FIFO_ERROR,
+ PHY_M_AN_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL,
+};
+
+
+/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
+enum {
+ PHY_M_EC_ENA_BC_EXT = 1<<15, /* Enable Block Carr. Ext. (88E1111 only) */
+ PHY_M_EC_ENA_LIN_LB = 1<<14, /* Enable Line Loopback (88E1111 only) */
+
+ PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */
+ PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */
+ /* (88E1011 only) */
+ PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */
+ /* (88E1011 only) */
+ PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */
+ /* (88E1111 only) */
+ PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */
+ /* !!! Errata in spec. (1 = disable) */
+ PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/
+ PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */
+ PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */
+ PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */
+ PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */
+ PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */};
+
+#define PHY_M_EC_M_DSC(x) ((x)<<10 & PHY_M_EC_M_DSC_MSK)
+ /* 00=1x; 01=2x; 10=3x; 11=4x */
+#define PHY_M_EC_S_DSC(x) ((x)<<8 & PHY_M_EC_S_DSC_MSK)
+ /* 00=dis; 01=1x; 10=2x; 11=3x */
+#define PHY_M_EC_DSC_2(x) ((x)<<9 & PHY_M_EC_M_DSC_MSK2)
+ /* 000=1x; 001=2x; 010=3x; 011=4x */
+#define PHY_M_EC_MAC_S(x) ((x)<<4 & PHY_M_EC_MAC_S_MSK)
+ /* 01X=0; 110=2.5; 111=25 (MHz) */
+
+/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
+enum {
+ PHY_M_PC_DIS_LINK_Pa = 1<<15,/* Disable Link Pulses */
+ PHY_M_PC_DSC_MSK = 7<<12,/* Bit 14..12: Downshift Counter */
+ PHY_M_PC_DOWN_S_ENA = 1<<11,/* Downshift Enable */
+};
+/* !!! Errata in spec. (1 = disable) */
+
+#define PHY_M_PC_DSC(x) (((x)<<12) & PHY_M_PC_DSC_MSK)
+ /* 100=5x; 101=6x; 110=7x; 111=8x */
+enum {
+ MAC_TX_CLK_0_MHZ = 2,
+ MAC_TX_CLK_2_5_MHZ = 6,
+ MAC_TX_CLK_25_MHZ = 7,
+};
+
+/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/
+enum {
+ PHY_M_LEDC_DIS_LED = 1<<15, /* Disable LED */
+ PHY_M_LEDC_PULS_MSK = 7<<12,/* Bit 14..12: Pulse Stretch Mask */
+ PHY_M_LEDC_F_INT = 1<<11, /* Force Interrupt */
+ PHY_M_LEDC_BL_R_MSK = 7<<8,/* Bit 10.. 8: Blink Rate Mask */
+ PHY_M_LEDC_DP_C_LSB = 1<<7, /* Duplex Control (LSB, 88E1111 only) */
+ PHY_M_LEDC_TX_C_LSB = 1<<6, /* Tx Control (LSB, 88E1111 only) */
+ PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */
+ /* (88E1111 only) */
+};
+
+enum {
+ PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */
+ /* (88E1011 only) */
+ PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */
+ PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */
+ PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */
+ PHY_M_LEDC_TX_CTRL = 1<<0, /* Tx Activity / Link */
+ PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */
+};
+
+#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK)
+
+/***** PHY_MARV_PHY_STAT (page 3)16 bit r/w Polarity Control Reg. *****/
+enum {
+ PHY_M_POLC_LS1M_MSK = 0xf<<12, /* Bit 15..12: LOS,STAT1 Mix % Mask */
+ PHY_M_POLC_IS0M_MSK = 0xf<<8, /* Bit 11.. 8: INIT,STAT0 Mix % Mask */
+ PHY_M_POLC_LOS_MSK = 0x3<<6, /* Bit 7.. 6: LOS Pol. Ctrl. Mask */
+ PHY_M_POLC_INIT_MSK = 0x3<<4, /* Bit 5.. 4: INIT Pol. Ctrl. Mask */
+ PHY_M_POLC_STA1_MSK = 0x3<<2, /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */
+ PHY_M_POLC_STA0_MSK = 0x3, /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */
+};
+
+#define PHY_M_POLC_LS1_P_MIX(x) (((x)<<12) & PHY_M_POLC_LS1M_MSK)
+#define PHY_M_POLC_IS0_P_MIX(x) (((x)<<8) & PHY_M_POLC_IS0M_MSK)
+#define PHY_M_POLC_LOS_CTRL(x) (((x)<<6) & PHY_M_POLC_LOS_MSK)
+#define PHY_M_POLC_INIT_CTRL(x) (((x)<<4) & PHY_M_POLC_INIT_MSK)
+#define PHY_M_POLC_STA1_CTRL(x) (((x)<<2) & PHY_M_POLC_STA1_MSK)
+#define PHY_M_POLC_STA0_CTRL(x) (((x)<<0) & PHY_M_POLC_STA0_MSK)
+
+enum {
+ PULS_NO_STR = 0,/* no pulse stretching */
+ PULS_21MS = 1,/* 21 ms to 42 ms */
+ PULS_42MS = 2,/* 42 ms to 84 ms */
+ PULS_84MS = 3,/* 84 ms to 170 ms */
+ PULS_170MS = 4,/* 170 ms to 340 ms */
+ PULS_340MS = 5,/* 340 ms to 670 ms */
+ PULS_670MS = 6,/* 670 ms to 1.3 s */
+ PULS_1300MS = 7,/* 1.3 s to 2.7 s */
+};
+
+#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+
+enum {
+ BLINK_42MS = 0,/* 42 ms */
+ BLINK_84MS = 1,/* 84 ms */
+ BLINK_170MS = 2,/* 170 ms */
+ BLINK_340MS = 3,/* 340 ms */
+ BLINK_670MS = 4,/* 670 ms */
+};
+
+/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */
+ /* Bit 13..12: reserved */
+#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */
+#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */
+#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */
+#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */
+#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */
+#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */
+
+enum {
+ MO_LED_NORM = 0,
+ MO_LED_BLINK = 1,
+ MO_LED_OFF = 2,
+ MO_LED_ON = 3,
+};
+
+/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
+enum {
+ PHY_M_EC2_FI_IMPED = 1<<6, /* Fiber Input Impedance */
+ PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */
+ PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */
+ PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */
+ PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */
+};
+
+/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/
+enum {
+ PHY_M_FC_AUTO_SEL = 1<<15, /* Fiber/Copper Auto Sel. Dis. */
+ PHY_M_FC_AN_REG_ACC = 1<<14, /* Fiber/Copper AN Reg. Access */
+ PHY_M_FC_RESOLUTION = 1<<13, /* Fiber/Copper Resolution */
+ PHY_M_SER_IF_AN_BP = 1<<12, /* Ser. IF AN Bypass Enable */
+ PHY_M_SER_IF_BP_ST = 1<<11, /* Ser. IF AN Bypass Status */
+ PHY_M_IRQ_POLARITY = 1<<10, /* IRQ polarity */
+ PHY_M_DIS_AUT_MED = 1<<9, /* Disable Aut. Medium Reg. Selection */
+ /* (88E1111 only) */
+
+ PHY_M_UNDOC1 = 1<<7, /* undocumented bit !! */
+ PHY_M_DTE_POW_STAT = 1<<4, /* DTE Power Status (88E1111 only) */
+ PHY_M_MODE_MASK = 0xf, /* Bit 3.. 0: copy of HWCFG MODE[3:0] */
+};
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/
+ /* Bit 15..12: reserved (used internally) */
+enum {
+ PHY_M_FELP_LED2_MSK = 0xf<<8, /* Bit 11.. 8: LED2 Mask (LINK) */
+ PHY_M_FELP_LED1_MSK = 0xf<<4, /* Bit 7.. 4: LED1 Mask (ACT) */
+ PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */
+};
+
+#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK)
+
+enum {
+ LED_PAR_CTRL_COLX = 0x00,
+ LED_PAR_CTRL_ERROR = 0x01,
+ LED_PAR_CTRL_DUPLEX = 0x02,
+ LED_PAR_CTRL_DP_COL = 0x03,
+ LED_PAR_CTRL_SPEED = 0x04,
+ LED_PAR_CTRL_LINK = 0x05,
+ LED_PAR_CTRL_TX = 0x06,
+ LED_PAR_CTRL_RX = 0x07,
+ LED_PAR_CTRL_ACT = 0x08,
+ LED_PAR_CTRL_LNK_RX = 0x09,
+ LED_PAR_CTRL_LNK_AC = 0x0a,
+ LED_PAR_CTRL_ACT_BL = 0x0b,
+ LED_PAR_CTRL_TX_BL = 0x0c,
+ LED_PAR_CTRL_RX_BL = 0x0d,
+ LED_PAR_CTRL_COL_BL = 0x0e,
+ LED_PAR_CTRL_INACT = 0x0f
+};
+
+/*****,PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/
+enum {
+ PHY_M_FESC_DIS_WAIT = 1<<2, /* Disable TDR Waiting Period */
+ PHY_M_FESC_ENA_MCLK = 1<<1, /* Enable MAC Rx Clock in sleep mode */
+ PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */
+};
+
+/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
+/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/
+enum {
+ PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */
+ PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */
+ PHY_M_MAC_MD_COPPER = 5,/* Copper only */
+ PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */
+};
+#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK)
+
+/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/
+enum {
+ PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */
+ PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */
+ PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */
+ PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */
+};
+
+#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK)
+
+/* GMAC registers */
+/* Port Registers */
+enum {
+ GM_GP_STAT = 0x0000, /* 16 bit r/o General Purpose Status */
+ GM_GP_CTRL = 0x0004, /* 16 bit r/w General Purpose Control */
+ GM_TX_CTRL = 0x0008, /* 16 bit r/w Transmit Control Reg. */
+ GM_RX_CTRL = 0x000c, /* 16 bit r/w Receive Control Reg. */
+ GM_TX_FLOW_CTRL = 0x0010, /* 16 bit r/w Transmit Flow-Control */
+ GM_TX_PARAM = 0x0014, /* 16 bit r/w Transmit Parameter Reg. */
+ GM_SERIAL_MODE = 0x0018, /* 16 bit r/w Serial Mode Register */
+/* Source Address Registers */
+ GM_SRC_ADDR_1L = 0x001c, /* 16 bit r/w Source Address 1 (low) */
+ GM_SRC_ADDR_1M = 0x0020, /* 16 bit r/w Source Address 1 (middle) */
+ GM_SRC_ADDR_1H = 0x0024, /* 16 bit r/w Source Address 1 (high) */
+ GM_SRC_ADDR_2L = 0x0028, /* 16 bit r/w Source Address 2 (low) */
+ GM_SRC_ADDR_2M = 0x002c, /* 16 bit r/w Source Address 2 (middle) */
+ GM_SRC_ADDR_2H = 0x0030, /* 16 bit r/w Source Address 2 (high) */
+
+/* Multicast Address Hash Registers */
+ GM_MC_ADDR_H1 = 0x0034, /* 16 bit r/w Multicast Address Hash 1 */
+ GM_MC_ADDR_H2 = 0x0038, /* 16 bit r/w Multicast Address Hash 2 */
+ GM_MC_ADDR_H3 = 0x003c, /* 16 bit r/w Multicast Address Hash 3 */
+ GM_MC_ADDR_H4 = 0x0040, /* 16 bit r/w Multicast Address Hash 4 */
+
+/* Interrupt Source Registers */
+ GM_TX_IRQ_SRC = 0x0044, /* 16 bit r/o Tx Overflow IRQ Source */
+ GM_RX_IRQ_SRC = 0x0048, /* 16 bit r/o Rx Overflow IRQ Source */
+ GM_TR_IRQ_SRC = 0x004c, /* 16 bit r/o Tx/Rx Over. IRQ Source */
+
+/* Interrupt Mask Registers */
+ GM_TX_IRQ_MSK = 0x0050, /* 16 bit r/w Tx Overflow IRQ Mask */
+ GM_RX_IRQ_MSK = 0x0054, /* 16 bit r/w Rx Overflow IRQ Mask */
+ GM_TR_IRQ_MSK = 0x0058, /* 16 bit r/w Tx/Rx Over. IRQ Mask */
+
+/* Serial Management Interface (SMI) Registers */
+ GM_SMI_CTRL = 0x0080, /* 16 bit r/w SMI Control Register */
+ GM_SMI_DATA = 0x0084, /* 16 bit r/w SMI Data Register */
+ GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */
+};
+
+/* MIB Counters */
+#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */
+#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */
+
+/*
+ * MIB Counters base address definitions (low word) -
+ * use offset 4 for access to high word (32 bit r/o)
+ */
+enum {
+ GM_RXF_UC_OK = GM_MIB_CNT_BASE + 0, /* Unicast Frames Received OK */
+ GM_RXF_BC_OK = GM_MIB_CNT_BASE + 8, /* Broadcast Frames Received OK */
+ GM_RXF_MPAUSE = GM_MIB_CNT_BASE + 16, /* Pause MAC Ctrl Frames Received */
+ GM_RXF_MC_OK = GM_MIB_CNT_BASE + 24, /* Multicast Frames Received OK */
+ GM_RXF_FCS_ERR = GM_MIB_CNT_BASE + 32, /* Rx Frame Check Seq. Error */
+ /* GM_MIB_CNT_BASE + 40: reserved */
+ GM_RXO_OK_LO = GM_MIB_CNT_BASE + 48, /* Octets Received OK Low */
+ GM_RXO_OK_HI = GM_MIB_CNT_BASE + 56, /* Octets Received OK High */
+ GM_RXO_ERR_LO = GM_MIB_CNT_BASE + 64, /* Octets Received Invalid Low */
+ GM_RXO_ERR_HI = GM_MIB_CNT_BASE + 72, /* Octets Received Invalid High */
+ GM_RXF_SHT = GM_MIB_CNT_BASE + 80, /* Frames <64 Byte Received OK */
+ GM_RXE_FRAG = GM_MIB_CNT_BASE + 88, /* Frames <64 Byte Received with FCS Err */
+ GM_RXF_64B = GM_MIB_CNT_BASE + 96, /* 64 Byte Rx Frame */
+ GM_RXF_127B = GM_MIB_CNT_BASE + 104, /* 65-127 Byte Rx Frame */
+ GM_RXF_255B = GM_MIB_CNT_BASE + 112, /* 128-255 Byte Rx Frame */
+ GM_RXF_511B = GM_MIB_CNT_BASE + 120, /* 256-511 Byte Rx Frame */
+ GM_RXF_1023B = GM_MIB_CNT_BASE + 128, /* 512-1023 Byte Rx Frame */
+ GM_RXF_1518B = GM_MIB_CNT_BASE + 136, /* 1024-1518 Byte Rx Frame */
+ GM_RXF_MAX_SZ = GM_MIB_CNT_BASE + 144, /* 1519-MaxSize Byte Rx Frame */
+ GM_RXF_LNG_ERR = GM_MIB_CNT_BASE + 152, /* Rx Frame too Long Error */
+ GM_RXF_JAB_PKT = GM_MIB_CNT_BASE + 160, /* Rx Jabber Packet Frame */
+ /* GM_MIB_CNT_BASE + 168: reserved */
+ GM_RXE_FIFO_OV = GM_MIB_CNT_BASE + 176, /* Rx FIFO overflow Event */
+ /* GM_MIB_CNT_BASE + 184: reserved */
+ GM_TXF_UC_OK = GM_MIB_CNT_BASE + 192, /* Unicast Frames Xmitted OK */
+ GM_TXF_BC_OK = GM_MIB_CNT_BASE + 200, /* Broadcast Frames Xmitted OK */
+ GM_TXF_MPAUSE = GM_MIB_CNT_BASE + 208, /* Pause MAC Ctrl Frames Xmitted */
+ GM_TXF_MC_OK = GM_MIB_CNT_BASE + 216, /* Multicast Frames Xmitted OK */
+ GM_TXO_OK_LO = GM_MIB_CNT_BASE + 224, /* Octets Transmitted OK Low */
+ GM_TXO_OK_HI = GM_MIB_CNT_BASE + 232, /* Octets Transmitted OK High */
+ GM_TXF_64B = GM_MIB_CNT_BASE + 240, /* 64 Byte Tx Frame */
+ GM_TXF_127B = GM_MIB_CNT_BASE + 248, /* 65-127 Byte Tx Frame */
+ GM_TXF_255B = GM_MIB_CNT_BASE + 256, /* 128-255 Byte Tx Frame */
+ GM_TXF_511B = GM_MIB_CNT_BASE + 264, /* 256-511 Byte Tx Frame */
+ GM_TXF_1023B = GM_MIB_CNT_BASE + 272, /* 512-1023 Byte Tx Frame */
+ GM_TXF_1518B = GM_MIB_CNT_BASE + 280, /* 1024-1518 Byte Tx Frame */
+ GM_TXF_MAX_SZ = GM_MIB_CNT_BASE + 288, /* 1519-MaxSize Byte Tx Frame */
+
+ GM_TXF_COL = GM_MIB_CNT_BASE + 304, /* Tx Collision */
+ GM_TXF_LAT_COL = GM_MIB_CNT_BASE + 312, /* Tx Late Collision */
+ GM_TXF_ABO_COL = GM_MIB_CNT_BASE + 320, /* Tx aborted due to Exces. Col. */
+ GM_TXF_MUL_COL = GM_MIB_CNT_BASE + 328, /* Tx Multiple Collision */
+ GM_TXF_SNG_COL = GM_MIB_CNT_BASE + 336, /* Tx Single Collision */
+ GM_TXE_FIFO_UR = GM_MIB_CNT_BASE + 344, /* Tx FIFO Underrun Event */
+};
+
+/* GMAC Bit Definitions */
+/* GM_GP_STAT 16 bit r/o General Purpose Status Register */
+enum {
+ GM_GPSR_SPEED = 1<<15, /* Bit 15: Port Speed (1 = 100 Mbps) */
+ GM_GPSR_DUPLEX = 1<<14, /* Bit 14: Duplex Mode (1 = Full) */
+ GM_GPSR_FC_TX_DIS = 1<<13, /* Bit 13: Tx Flow-Control Mode Disabled */
+ GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */
+ GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */
+ GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */
+ GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */
+ GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */
+
+ GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */
+ GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */
+ GM_GPSR_PART_MODE = 1<<3, /* Bit 3: Partition mode */
+ GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */
+ GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */
+};
+
+/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
+enum {
+ GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */
+ GM_GPCR_FC_TX_DIS = 1<<13, /* Bit 13: Disable Tx Flow-Control Mode */
+ GM_GPCR_TX_ENA = 1<<12, /* Bit 12: Enable Transmit */
+ GM_GPCR_RX_ENA = 1<<11, /* Bit 11: Enable Receive */
+ GM_GPCR_BURST_ENA = 1<<10, /* Bit 10: Enable Burst Mode */
+ GM_GPCR_LOOP_ENA = 1<<9, /* Bit 9: Enable MAC Loopback Mode */
+ GM_GPCR_PART_ENA = 1<<8, /* Bit 8: Enable Partition Mode */
+ GM_GPCR_GIGS_ENA = 1<<7, /* Bit 7: Gigabit Speed (1000 Mbps) */
+ GM_GPCR_FL_PASS = 1<<6, /* Bit 6: Force Link Pass */
+ GM_GPCR_DUP_FULL = 1<<5, /* Bit 5: Full Duplex Mode */
+ GM_GPCR_FC_RX_DIS = 1<<4, /* Bit 4: Disable Rx Flow-Control Mode */
+ GM_GPCR_SPEED_100 = 1<<3, /* Bit 3: Port Speed 100 Mbps */
+ GM_GPCR_AU_DUP_DIS = 1<<2, /* Bit 2: Disable Auto-Update Duplex */
+ GM_GPCR_AU_FCT_DIS = 1<<1, /* Bit 1: Disable Auto-Update Flow-C. */
+ GM_GPCR_AU_SPD_DIS = 1<<0, /* Bit 0: Disable Auto-Update Speed */
+};
+
+#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS)
+
+/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
+enum {
+ GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */
+ GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */
+ GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */
+ GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */
+};
+
+#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK)
+#define TX_COL_DEF 0x04
+
+/* GM_RX_CTRL 16 bit r/w Receive Control Register */
+enum {
+ GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */
+ GM_RXCR_MCF_ENA = 1<<14, /* Bit 14: Enable Multicast filtering */
+ GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */
+ GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */
+};
+
+/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
+enum {
+ GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */
+ GM_TXPA_JAMIPG_MSK = 0x1f<<9, /* Bit 13..9: Jam IPG */
+ GM_TXPA_JAMDAT_MSK = 0x1f<<4, /* Bit 8..4: IPG Jam to Data */
+ GM_TXPA_BO_LIM_MSK = 0x0f, /* Bit 3.. 0: Backoff Limit Mask */
+
+ TX_JAM_LEN_DEF = 0x03,
+ TX_JAM_IPG_DEF = 0x0b,
+ TX_IPG_JAM_DEF = 0x1c,
+ TX_BOF_LIM_DEF = 0x04,
+};
+
+#define TX_JAM_LEN_VAL(x) (((x)<<14) & GM_TXPA_JAMLEN_MSK)
+#define TX_JAM_IPG_VAL(x) (((x)<<9) & GM_TXPA_JAMIPG_MSK)
+#define TX_IPG_JAM_DATA(x) (((x)<<4) & GM_TXPA_JAMDAT_MSK)
+#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK)
+
+
+/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */
+enum {
+ GM_SMOD_DATABL_MSK = 0x1f<<11, /* Bit 15..11: Data Blinder (r/o) */
+ GM_SMOD_LIMIT_4 = 1<<10, /* Bit 10: 4 consecutive Tx trials */
+ GM_SMOD_VLAN_ENA = 1<<9, /* Bit 9: Enable VLAN (Max. Frame Len) */
+ GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */
+ GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
+};
+
+#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK)
+#define DATA_BLIND_DEF 0x04
+
+#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK)
+#define IPG_DATA_DEF 0x1e
+
+/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
+enum {
+ GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */
+ GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */
+ GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/
+ GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */
+ GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */
+};
+
+#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK)
+#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK)
+
+/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
+enum {
+ GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */
+ GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */
+};
+
+/* Receive Frame Status Encoding */
+enum {
+ GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */
+ GMR_FS_VLAN = 1<<13, /* VLAN Packet */
+ GMR_FS_JABBER = 1<<12, /* Jabber Packet */
+ GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */
+ GMR_FS_MC = 1<<10, /* Multicast Packet */
+ GMR_FS_BC = 1<<9, /* Broadcast Packet */
+ GMR_FS_RX_OK = 1<<8, /* Receive OK (Good Packet) */
+ GMR_FS_GOOD_FC = 1<<7, /* Good Flow-Control Packet */
+ GMR_FS_BAD_FC = 1<<6, /* Bad Flow-Control Packet */
+ GMR_FS_MII_ERR = 1<<5, /* MII Error */
+ GMR_FS_LONG_ERR = 1<<4, /* Too Long Packet */
+ GMR_FS_FRAGMENT = 1<<3, /* Fragment */
+
+ GMR_FS_CRC_ERR = 1<<1, /* CRC Error */
+ GMR_FS_RX_FF_OV = 1<<0, /* Rx FIFO Overflow */
+
+ GMR_FS_ANY_ERR = GMR_FS_RX_FF_OV | GMR_FS_CRC_ERR |
+ GMR_FS_FRAGMENT | GMR_FS_LONG_ERR |
+ GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC |
+ GMR_FS_UN_SIZE | GMR_FS_JABBER,
+};
+
+/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
+enum {
+ RX_TRUNC_ON = 1<<27, /* enable packet truncation */
+ RX_TRUNC_OFF = 1<<26, /* disable packet truncation */
+ RX_VLAN_STRIP_ON = 1<<25, /* enable VLAN stripping */
+ RX_VLAN_STRIP_OFF = 1<<24, /* disable VLAN stripping */
+
+ GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */
+ GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */
+ GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */
+
+ GMF_RP_TST_ON = 1<<10, /* Read Pointer Test On */
+ GMF_RP_TST_OFF = 1<<9, /* Read Pointer Test Off */
+ GMF_RP_STEP = 1<<8, /* Read Pointer Step/Increment */
+ GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */
+ GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */
+ GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */
+ GMF_CLI_RX_C = 1<<4, /* Clear IRQ Rx Frame Complete */
+
+ GMF_OPER_ON = 1<<3, /* Operational Mode On */
+ GMF_OPER_OFF = 1<<2, /* Operational Mode Off */
+ GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */
+ GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */
+
+ RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */
+
+ GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON,
+};
+
+
+/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */
+enum {
+ TX_STFW_DIS = 1<<31,/* Disable Store & Forward (Yukon-EC Ultra) */
+ TX_STFW_ENA = 1<<30,/* Enable Store & Forward (Yukon-EC Ultra) */
+
+ TX_VLAN_TAG_ON = 1<<25,/* enable VLAN tagging */
+ TX_VLAN_TAG_OFF = 1<<24,/* disable VLAN tagging */
+
+ GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */
+ GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */
+ GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */
+
+ GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */
+ GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */
+ GMF_CLI_TX_PE = 1<<4, /* Clear IRQ Tx Parity Error */
+};
+
+/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
+enum {
+ GMT_ST_START = 1<<2, /* Start Time Stamp Timer */
+ GMT_ST_STOP = 1<<1, /* Stop Time Stamp Timer */
+ GMT_ST_CLR_IRQ = 1<<0, /* Clear Time Stamp Timer IRQ */
+};
+
+/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */
+enum {
+ Y2_ASF_OS_PRES = 1<<4, /* ASF operation system present */
+ Y2_ASF_RESET = 1<<3, /* ASF system in reset state */
+ Y2_ASF_RUNNING = 1<<2, /* ASF system operational */
+ Y2_ASF_CLR_HSTI = 1<<1, /* Clear ASF IRQ */
+ Y2_ASF_IRQ = 1<<0, /* Issue an IRQ to ASF system */
+
+ Y2_ASF_UC_STATE = 3<<2, /* ASF uC State */
+ Y2_ASF_CLK_HALT = 0, /* ASF system clock stopped */
+};
+
+/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */
+enum {
+ Y2_ASF_CLR_ASFI = 1<<1, /* Clear host IRQ */
+ Y2_ASF_HOST_IRQ = 1<<0, /* Issue an IRQ to HOST system */
+};
+
+/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */
+enum {
+ SC_STAT_CLR_IRQ = 1<<4, /* Status Burst IRQ clear */
+ SC_STAT_OP_ON = 1<<3, /* Operational Mode On */
+ SC_STAT_OP_OFF = 1<<2, /* Operational Mode Off */
+ SC_STAT_RST_CLR = 1<<1, /* Clear Status Unit Reset (Enable) */
+ SC_STAT_RST_SET = 1<<0, /* Set Status Unit Reset */
+};
+
+/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
+enum {
+ GMC_H_BURST_ON = 1<<7, /* Half Duplex Burst Mode On */
+ GMC_H_BURST_OFF = 1<<6, /* Half Duplex Burst Mode Off */
+ GMC_F_LOOPB_ON = 1<<5, /* FIFO Loopback On */
+ GMC_F_LOOPB_OFF = 1<<4, /* FIFO Loopback Off */
+ GMC_PAUSE_ON = 1<<3, /* Pause On */
+ GMC_PAUSE_OFF = 1<<2, /* Pause Off */
+ GMC_RST_CLR = 1<<1, /* Clear GMAC Reset */
+ GMC_RST_SET = 1<<0, /* Set GMAC Reset */
+};
+
+/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
+enum {
+ GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */
+ GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */
+ GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */
+ GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */
+ GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */
+ GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */
+ GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */
+ GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */
+ GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */
+ GPC_ANEG_0 = 1<<19, /* ANEG[0] */
+ GPC_ENA_XC = 1<<18, /* Enable MDI crossover */
+ GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */
+ GPC_ANEG_3 = 1<<16, /* ANEG[3] */
+ GPC_ANEG_2 = 1<<15, /* ANEG[2] */
+ GPC_ANEG_1 = 1<<14, /* ANEG[1] */
+ GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */
+ GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */
+ GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */
+ GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */
+ GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */
+ GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */
+ /* Bits 7..2: reserved */
+ GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */
+ GPC_RST_SET = 1<<0, /* Set GPHY Reset */
+};
+
+/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
+/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
+enum {
+ GM_IS_TX_CO_OV = 1<<5, /* Transmit Counter Overflow IRQ */
+ GM_IS_RX_CO_OV = 1<<4, /* Receive Counter Overflow IRQ */
+ GM_IS_TX_FF_UR = 1<<3, /* Transmit FIFO Underrun */
+ GM_IS_TX_COMPL = 1<<2, /* Frame Transmission Complete */
+ GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */
+ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
+
+#define GMAC_DEF_MSK GM_IS_TX_FF_UR
+
+/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
+ /* Bits 15.. 2: reserved */
+ GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */
+ GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */
+
+
+/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
+ WOL_CTL_LINK_CHG_OCC = 1<<15,
+ WOL_CTL_MAGIC_PKT_OCC = 1<<14,
+ WOL_CTL_PATTERN_OCC = 1<<13,
+ WOL_CTL_CLEAR_RESULT = 1<<12,
+ WOL_CTL_ENA_PME_ON_LINK_CHG = 1<<11,
+ WOL_CTL_DIS_PME_ON_LINK_CHG = 1<<10,
+ WOL_CTL_ENA_PME_ON_MAGIC_PKT = 1<<9,
+ WOL_CTL_DIS_PME_ON_MAGIC_PKT = 1<<8,
+ WOL_CTL_ENA_PME_ON_PATTERN = 1<<7,
+ WOL_CTL_DIS_PME_ON_PATTERN = 1<<6,
+ WOL_CTL_ENA_LINK_CHG_UNIT = 1<<5,
+ WOL_CTL_DIS_LINK_CHG_UNIT = 1<<4,
+ WOL_CTL_ENA_MAGIC_PKT_UNIT = 1<<3,
+ WOL_CTL_DIS_MAGIC_PKT_UNIT = 1<<2,
+ WOL_CTL_ENA_PATTERN_UNIT = 1<<1,
+ WOL_CTL_DIS_PATTERN_UNIT = 1<<0,
+};
+
+#define WOL_CTL_DEFAULT \
+ (WOL_CTL_DIS_PME_ON_LINK_CHG | \
+ WOL_CTL_DIS_PME_ON_PATTERN | \
+ WOL_CTL_DIS_PME_ON_MAGIC_PKT | \
+ WOL_CTL_DIS_LINK_CHG_UNIT | \
+ WOL_CTL_DIS_PATTERN_UNIT | \
+ WOL_CTL_DIS_MAGIC_PKT_UNIT)
+
+/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
+#define WOL_CTL_PATT_ENA(x) (1 << (x))
+
+
+/* Control flags */
+enum {
+ UDPTCP = 1<<0,
+ CALSUM = 1<<1,
+ WR_SUM = 1<<2,
+ INIT_SUM= 1<<3,
+ LOCK_SUM= 1<<4,
+ INS_VLAN= 1<<5,
+ FRC_STAT= 1<<6,
+ EOP = 1<<7,
+};
+
+enum {
+ HW_OWNER = 1<<7,
+ OP_TCPWRITE = 0x11,
+ OP_TCPSTART = 0x12,
+ OP_TCPINIT = 0x14,
+ OP_TCPLCK = 0x18,
+ OP_TCPCHKSUM = OP_TCPSTART,
+ OP_TCPIS = OP_TCPINIT | OP_TCPSTART,
+ OP_TCPLW = OP_TCPLCK | OP_TCPWRITE,
+ OP_TCPLSW = OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE,
+ OP_TCPLISW = OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE,
+
+ OP_ADDR64 = 0x21,
+ OP_VLAN = 0x22,
+ OP_ADDR64VLAN = OP_ADDR64 | OP_VLAN,
+ OP_LRGLEN = 0x24,
+ OP_LRGLENVLAN = OP_LRGLEN | OP_VLAN,
+ OP_BUFFER = 0x40,
+ OP_PACKET = 0x41,
+ OP_LARGESEND = 0x43,
+
+/* YUKON-2 STATUS opcodes defines */
+ OP_RXSTAT = 0x60,
+ OP_RXTIMESTAMP = 0x61,
+ OP_RXVLAN = 0x62,
+ OP_RXCHKS = 0x64,
+ OP_RXCHKSVLAN = OP_RXCHKS | OP_RXVLAN,
+ OP_RXTIMEVLAN = OP_RXTIMESTAMP | OP_RXVLAN,
+ OP_RSS_HASH = 0x65,
+ OP_TXINDEXLE = 0x68,
+};
+
+/* Yukon 2 hardware interface
+ * Not tested on big endian
+ */
+struct sky2_tx_le {
+ union {
+ __le32 addr;
+ struct {
+ __le16 offset;
+ __le16 start;
+ } csum __attribute((packed));
+ struct {
+ __le16 size;
+ __le16 rsvd;
+ } tso __attribute((packed));
+ } tx;
+ __le16 length; /* also vlan tag or checksum start */
+ u8 ctrl;
+ u8 opcode;
+} __attribute((packed));
+
+struct sky2_rx_le {
+ __le32 addr;
+ __le16 length;
+ u8 ctrl;
+ u8 opcode;
+} __attribute((packed));;
+
+struct sky2_status_le {
+ __le32 status; /* also checksum */
+ __le16 length; /* also vlan tag */
+ u8 link;
+ u8 opcode;
+} __attribute((packed));
+
+struct tx_ring_info {
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(mapaddr);
+ u16 idx;
+};
+
+struct ring_info {
+ struct sk_buff *skb;
+ dma_addr_t mapaddr;
+};
+
+struct sky2_port {
+ struct sky2_hw *hw;
+ struct net_device *netdev;
+ unsigned port;
+ u32 msg_enable;
+
+ spinlock_t tx_lock ____cacheline_aligned_in_smp;
+ struct tx_ring_info *tx_ring;
+ struct sky2_tx_le *tx_le;
+ u16 tx_cons; /* next le to check */
+ u16 tx_prod; /* next le to use */
+ u32 tx_addr64;
+ u16 tx_pending;
+ u16 tx_last_put;
+ u16 tx_last_mss;
+
+ struct ring_info *rx_ring ____cacheline_aligned_in_smp;
+ struct sky2_rx_le *rx_le;
+ u32 rx_addr64;
+ u16 rx_next; /* next re to check */
+ u16 rx_put; /* next le index to use */
+ u16 rx_pending;
+ u16 rx_last_put;
+ u16 rx_bufsize;
+#ifdef SKY2_VLAN_TAG_USED
+ u16 rx_tag;
+ struct vlan_group *vlgrp;
+#endif
+
+ dma_addr_t rx_le_map;
+ dma_addr_t tx_le_map;
+ u32 advertising; /* ADVERTISED_ bits */
+ u16 speed; /* SPEED_1000, SPEED_100, ... */
+ u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */
+ u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
+ u8 rx_pause;
+ u8 tx_pause;
+ u8 rx_csum;
+ u8 wol;
+
+ struct net_device_stats net_stats;
+
+ struct work_struct phy_task;
+ struct semaphore phy_sema;
+};
+
+struct sky2_hw {
+ void __iomem *regs;
+ struct pci_dev *pdev;
+ u32 intr_mask;
+ struct net_device *dev[2];
+
+ int pm_cap;
+ u8 chip_id;
+ u8 chip_rev;
+ u8 copper;
+ u8 ports;
+
+ struct sky2_status_le *st_le;
+ u32 st_idx;
+ dma_addr_t st_dma;
+};
+
+/* Register accessor for memory mapped device */
+static inline u32 sky2_read32(const struct sky2_hw *hw, unsigned reg)
+{
+ return readl(hw->regs + reg);
+}
+
+static inline u16 sky2_read16(const struct sky2_hw *hw, unsigned reg)
+{
+ return readw(hw->regs + reg);
+}
+
+static inline u8 sky2_read8(const struct sky2_hw *hw, unsigned reg)
+{
+ return readb(hw->regs + reg);
+}
+
+/* This should probably go away, bus based tweeks suck */
+static inline int is_pciex(const struct sky2_hw *hw)
+{
+ u32 status;
+ pci_read_config_dword(hw->pdev, PCI_DEV_STATUS, &status);
+ return (status & PCI_OS_PCI_X) == 0;
+}
+
+static inline void sky2_write32(const struct sky2_hw *hw, unsigned reg, u32 val)
+{
+ writel(val, hw->regs + reg);
+}
+
+static inline void sky2_write16(const struct sky2_hw *hw, unsigned reg, u16 val)
+{
+ writew(val, hw->regs + reg);
+}
+
+static inline void sky2_write8(const struct sky2_hw *hw, unsigned reg, u8 val)
+{
+ writeb(val, hw->regs + reg);
+}
+
+/* Yukon PHY related registers */
+#define SK_GMAC_REG(port,reg) \
+ (BASE_GMAC_1 + (port) * (BASE_GMAC_2-BASE_GMAC_1) + (reg))
+#define GM_PHY_RETRIES 100
+
+static inline u16 gma_read16(const struct sky2_hw *hw, unsigned port, unsigned reg)
+{
+ return sky2_read16(hw, SK_GMAC_REG(port,reg));
+}
+
+static inline u32 gma_read32(struct sky2_hw *hw, unsigned port, unsigned reg)
+{
+ unsigned base = SK_GMAC_REG(port, reg);
+ return (u32) sky2_read16(hw, base)
+ | (u32) sky2_read16(hw, base+4) << 16;
+}
+
+static inline void gma_write16(const struct sky2_hw *hw, unsigned port, int r, u16 v)
+{
+ sky2_write16(hw, SK_GMAC_REG(port,r), v);
+}
+
+static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
+ const u8 *addr)
+{
+ gma_write16(hw, port, reg, (u16) addr[0] | ((u16) addr[1] << 8));
+ gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
+ gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
+}
+#endif
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2fc9893d69e..eb86b059809 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -24,6 +24,7 @@
#include <linux/compiler.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/in.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
@@ -3650,7 +3651,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
TXD_FLAG_CPU_POST_DMA);
skb->nh.iph->check = 0;
- skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len);
+ skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
skb->h.th->check = 0;
base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 942fae0f213..c2506b56a18 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -2865,11 +2865,11 @@ void TLan_PhyMonitor( struct net_device *dev )
* for this device.
* phy The address of the PHY to be queried.
* reg The register whose contents are to be
- * retreived.
+ * retrieved.
* val A pointer to a variable to store the
* retrieved value.
*
- * This function uses the TLAN's MII bus to retreive the contents
+ * This function uses the TLAN's MII bus to retrieve the contents
* of a given register on a PHY. It sends the appropriate info
* and then reads the 16-bit register value from the MII bus via
* the TLAN SIO register.
diff --git a/drivers/net/wan/.gitignore b/drivers/net/wan/.gitignore
new file mode 100644
index 00000000000..dae3ea6bb18
--- /dev/null
+++ b/drivers/net/wan/.gitignore
@@ -0,0 +1 @@
+wanxlfw.inc
diff --git a/drivers/net/wan/lmc/lmc_prot.h b/drivers/net/wan/lmc/lmc_prot.h
deleted file mode 100644
index f3b1df9e2cd..00000000000
--- a/drivers/net/wan/lmc/lmc_prot.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _LMC_PROTO_H_
-#define _LMC_PROTO_H_
-
-void lmc_proto_init(lmc_softc_t * const)
-void lmc_proto_attach(lmc_softc_t *sc const)
-void lmc_proto_detach(lmc_softc *sc const)
-void lmc_proto_reopen(lmc_softc_t *sc const)
-int lmc_proto_ioctl(lmc_softc_t *sc const, struct ifreq *ifr, int cmd)
-void lmc_proto_open(lmc_softc_t *sc const)
-void lmc_proto_close(lmc_softc_t *sc const)
-unsigned short lmc_proto_type(lmc_softc_t *sc const, struct skbuff *skb)
-
-
-#endif
-
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 00e55165b76..24f7967aab6 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -173,7 +173,7 @@ config IPW2100_MONITOR
promiscuous mode via the Wireless Tool's Monitor mode. While in this
mode, no packets can be sent.
-config IPW_DEBUG
+config IPW2100_DEBUG
bool "Enable full debugging output in IPW2100 module."
depends on IPW2100
---help---
@@ -192,7 +192,7 @@ config IPW_DEBUG
config IPW2200
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on IEEE80211 && PCI
+ depends on NET_RADIO && IEEE80211 && PCI
select FW_LOADER
---help---
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
@@ -217,7 +217,7 @@ config IPW2200
say M here and read <file:Documentation/modules.txt>. The module
will be called ipw2200.ko.
-config IPW_DEBUG
+config IPW2200_DEBUG
bool "Enable full debugging output in IPW2200 module."
depends on IPW2200
---help---
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 7a92b1cbd6a..ee866fd6957 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -4037,7 +4037,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid,
Cmd cmd;
Resp rsp;
- if (test_bit(FLAG_ENABLED, &ai->flags))
+ if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid))
printk(KERN_ERR
"%s: MAC should be disabled (rid=%04x)\n",
__FUNCTION__, rid);
@@ -5093,9 +5093,9 @@ static int set_wep_key(struct airo_info *ai, u16 index,
printk(KERN_INFO "Setting key %d\n", index);
}
- disable_MAC(ai, lock);
+ if (perm) disable_MAC(ai, lock);
writeWepKeyRid(ai, &wkr, perm, lock);
- enable_MAC(ai, &rsp, lock);
+ if (perm) enable_MAC(ai, &rsp, lock);
return 0;
}
@@ -6170,6 +6170,8 @@ static int airo_set_encode(struct net_device *dev,
{
struct airo_info *local = dev->priv;
CapabilityRid cap_rid; /* Card capability info */
+ int perm = ( dwrq->flags & IW_ENCODE_TEMP ? 0 : 1 );
+ u16 currentAuthType = local->config.authType;
/* Is WEP supported ? */
readCapabilityRid(local, &cap_rid, 1);
@@ -6212,7 +6214,7 @@ static int airo_set_encode(struct net_device *dev,
/* Copy the key in the driver */
memcpy(key.key, extra, dwrq->length);
/* Send the key to the card */
- set_wep_key(local, index, key.key, key.len, 1, 1);
+ set_wep_key(local, index, key.key, key.len, perm, 1);
}
/* WE specify that if a valid key is set, encryption
* should be enabled (user may turn it off later)
@@ -6220,13 +6222,12 @@ static int airo_set_encode(struct net_device *dev,
if((index == current_index) && (key.len > 0) &&
(local->config.authType == AUTH_OPEN)) {
local->config.authType = AUTH_ENCRYPT;
- set_bit (FLAG_COMMIT, &local->flags);
}
} else {
/* Do we want to just set the transmit key index ? */
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) {
- set_wep_key(local, index, NULL, 0, 1, 1);
+ set_wep_key(local, index, NULL, 0, perm, 1);
} else
/* Don't complain if only change the mode */
if(!dwrq->flags & IW_ENCODE_MODE) {
@@ -6241,7 +6242,7 @@ static int airo_set_encode(struct net_device *dev,
if(dwrq->flags & IW_ENCODE_OPEN)
local->config.authType = AUTH_ENCRYPT; // Only Wep
/* Commit the changes to flags if needed */
- if(dwrq->flags & IW_ENCODE_MODE)
+ if (local->config.authType != currentAuthType)
set_bit (FLAG_COMMIT, &local->flags);
return -EINPROGRESS; /* Call commit handler */
}
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index e328547599d..a496460ce22 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -82,8 +82,6 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
static void airo_config(dev_link_t *link);
static void airo_release(dev_link_t *link);
-static int airo_event(event_t event, int priority,
- event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
@@ -91,8 +89,7 @@ static int airo_event(event_t event, int priority,
needed to manage one actual PCMCIA card.
*/
-static dev_link_t *airo_attach(void);
-static void airo_detach(dev_link_t *);
+static void airo_detach(struct pcmcia_device *p_dev);
/*
You'll also need to prototype all the functions that will actually
@@ -102,14 +99,6 @@ static void airo_detach(dev_link_t *);
*/
/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static dev_info_t dev_info = "airo_cs";
-
-/*
A linked list of "instances" of the aironet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -119,15 +108,7 @@ static dev_info_t dev_info = "airo_cs";
device numbers are used to derive the corresponding array index.
*/
-static dev_link_t *dev_list = NULL;
-
/*
- A dev_link_t structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a dev_link_t structure can be used to point to
- a device-specific private data structure, like this.
-
A driver needs to provide a dev_node_t structure for each device
on a card. In some cases, there is only one device per card (for
example, ethernet cards, modems). In other cases, there may be
@@ -160,20 +141,18 @@ typedef struct local_info_t {
======================================================================*/
-static dev_link_t *airo_attach(void)
+static int airo_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
- int ret;
-
+
DEBUG(0, "airo_attach()\n");
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link) {
printk(KERN_ERR "airo_cs: no memory for new device\n");
- return NULL;
+ return -ENOMEM;
}
/* Interrupt setup */
@@ -197,24 +176,17 @@ static dev_link_t *airo_attach(void)
if (!local) {
printk(KERN_ERR "airo_cs: no memory for new device\n");
kfree (link);
- return NULL;
+ return -ENOMEM;
}
link->priv = local;
-
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- airo_detach(link);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ airo_config(link);
+
+ return 0;
} /* airo_attach */
/*======================================================================
@@ -226,37 +198,22 @@ static dev_link_t *airo_attach(void)
======================================================================*/
-static void airo_detach(dev_link_t *link)
+static void airo_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
-
+ dev_link_t *link = dev_to_instance(p_dev);
+
DEBUG(0, "airo_detach(0x%p)\n", link);
-
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
-
+
if (link->state & DEV_CONFIG)
airo_release(link);
-
+
if ( ((local_info_t*)link->priv)->eth_dev ) {
stop_airo_card( ((local_info_t*)link->priv)->eth_dev, 0 );
}
- ((local_info_t*)link->priv)->eth_dev = NULL;
-
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
-
-
- /* Unlink device structure, free pieces */
- *linkp = link->next;
+ ((local_info_t*)link->priv)->eth_dev = NULL;
+
kfree(link->priv);
kfree(link);
-
} /* airo_detach */
/*======================================================================
@@ -492,60 +449,34 @@ static void airo_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
+static int airo_suspend(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ local_info_t *local = link->priv;
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
- ======================================================================*/
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(local->eth_dev);
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
-static int airo_event(event_t event, int priority,
- event_callback_args_t *args)
+static int airo_resume(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(p_dev);
local_info_t *local = link->priv;
-
- DEBUG(1, "airo_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- netif_device_detach(local->eth_dev);
- airo_release(link);
- }
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- airo_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- netif_device_detach(local->eth_dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- reset_airo_card(local->eth_dev);
- netif_device_attach(local->eth_dev);
- }
- break;
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ reset_airo_card(local->eth_dev);
+ netif_device_attach(local->eth_dev);
}
+
return 0;
-} /* airo_event */
+}
static struct pcmcia_device_id airo_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a),
@@ -561,10 +492,11 @@ static struct pcmcia_driver airo_driver = {
.drv = {
.name = "airo_cs",
},
- .attach = airo_attach,
- .event = airo_event,
- .detach = airo_detach,
+ .probe = airo_attach,
+ .remove = airo_detach,
.id_table = airo_ids,
+ .suspend = airo_suspend,
+ .resume = airo_resume,
};
static int airo_cs_init(void)
@@ -575,7 +507,6 @@ static int airo_cs_init(void)
static void airo_cs_cleanup(void)
{
pcmcia_unregister_driver(&airo_driver);
- BUG_ON(dev_list != NULL);
}
/*
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 5e53c5258a3..e4729ddf29f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -5,9 +5,9 @@
Copyright 2000-2001 ATMEL Corporation.
Copyright 2003-2004 Simon Kelley.
- This code was developed from version 2.1.1 of the Atmel drivers,
- released by Atmel corp. under the GPL in December 2002. It also
- includes code from the Linux aironet drivers (C) Benjamin Reed,
+ This code was developed from version 2.1.1 of the Atmel drivers,
+ released by Atmel corp. under the GPL in December 2002. It also
+ includes code from the Linux aironet drivers (C) Benjamin Reed,
and the Linux PCMCIA package, (C) David Hinds and the Linux wireless
extensions, (C) Jean Tourrilhes.
@@ -31,7 +31,7 @@
along with Atmel wireless lan drivers; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- For all queries about this code, please contact the current author,
+ For all queries about this code, please contact the current author,
Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
Credit is due to HP UK and Cambridge Online Systems Ltd for supplying
@@ -79,13 +79,13 @@ MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.")
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("Atmel at76c50x wireless cards");
-/* The name of the firmware file to be loaded
+/* The name of the firmware file to be loaded
over-rides any automatic selection */
static char *firmware = NULL;
module_param(firmware, charp, 0);
/* table of firmware file names */
-static struct {
+static struct {
AtmelFWType fw_type;
const char *fw_file;
const char *fw_file_ext;
@@ -104,17 +104,17 @@ static struct {
#define MAX_SSID_LENGTH 32
#define MGMT_JIFFIES (256 * HZ / 100)
-#define MAX_BSS_ENTRIES 64
+#define MAX_BSS_ENTRIES 64
/* registers */
-#define GCR 0x00 // (SIR0) General Configuration Register
-#define BSR 0x02 // (SIR1) Bank Switching Select Register
+#define GCR 0x00 // (SIR0) General Configuration Register
+#define BSR 0x02 // (SIR1) Bank Switching Select Register
#define AR 0x04
#define DR 0x08
-#define MR1 0x12 // Mirror Register 1
-#define MR2 0x14 // Mirror Register 2
-#define MR3 0x16 // Mirror Register 3
-#define MR4 0x18 // Mirror Register 4
+#define MR1 0x12 // Mirror Register 1
+#define MR2 0x14 // Mirror Register 2
+#define MR3 0x16 // Mirror Register 3
+#define MR4 0x18 // Mirror Register 4
#define GPR1 0x0c
#define GPR2 0x0e
@@ -123,9 +123,9 @@ static struct {
// Constants for the GCR register.
//
#define GCR_REMAP 0x0400 // Remap internal SRAM to 0
-#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset)
+#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset)
#define GCR_CORES 0x0060 // Core Reset (ARM and PAI are reset)
-#define GCR_ENINT 0x0002 // Enable Interrupts
+#define GCR_ENINT 0x0002 // Enable Interrupts
#define GCR_ACKINT 0x0008 // Acknowledge Interrupts
#define BSS_SRAM 0x0200 // AMBA module selection --> SRAM
@@ -190,7 +190,7 @@ struct rx_desc {
u32 Next;
u16 MsduPos;
u16 MsduSize;
-
+
u8 State;
u8 Status;
u8 Rate;
@@ -199,7 +199,6 @@ struct rx_desc {
u8 PreambleType;
u16 Duration;
u32 RxTime;
-
};
#define RX_DESC_FLAG_VALID 0x80
@@ -218,16 +217,15 @@ struct rx_desc {
#define RX_DESC_DURATION_OFFSET 14
#define RX_DESC_RX_TIME_OFFSET 16
-
struct tx_desc {
u32 NextDescriptor;
u16 TxStartOfFrame;
u16 TxLength;
-
+
u8 TxState;
u8 TxStatus;
u8 RetryCount;
-
+
u8 TxRate;
u8 KeyIndex;
@@ -238,10 +236,8 @@ struct tx_desc {
u8 Reserved;
u8 PacketType;
u16 HostTxLength;
-
};
-
#define TX_DESC_NEXT_OFFSET 0
#define TX_DESC_POS_OFFSET 4
#define TX_DESC_SIZE_OFFSET 6
@@ -255,8 +251,6 @@ struct tx_desc {
#define TX_DESC_PACKET_TYPE_OFFSET 17
#define TX_DESC_HOST_LENGTH_OFFSET 18
-
-
///////////////////////////////////////////////////////
// Host-MAC interface
///////////////////////////////////////////////////////
@@ -266,7 +260,6 @@ struct tx_desc {
#define TX_FIRM_OWN 0x80
#define TX_DONE 0x40
-
#define TX_ERROR 0x01
#define TX_PACKET_TYPE_DATA 0x01
@@ -280,8 +273,7 @@ struct tx_desc {
#define ISR_COMMAND_COMPLETE 0x10 // command completed
#define ISR_OUT_OF_RANGE 0x20 // command completed
#define ISR_IBSS_MERGE 0x40 // (4.1.2.30): IBSS merge
-#define ISR_GENERIC_IRQ 0x80
-
+#define ISR_GENERIC_IRQ 0x80
#define Local_Mib_Type 0x01
#define Mac_Address_Mib_Type 0x02
@@ -317,7 +309,6 @@ struct tx_desc {
#define LOCAL_MIB_PREAMBLE_TYPE 9
#define MAC_ADDR_MIB_MAC_ADDR_POS 0
-
#define CMD_Set_MIB_Vars 0x01
#define CMD_Get_MIB_Vars 0x02
#define CMD_Scan 0x03
@@ -338,7 +329,6 @@ struct tx_desc {
#define CMD_STATUS_HOST_ERROR 0xFF
#define CMD_STATUS_BUSY 0xFE
-
#define CMD_BLOCK_COMMAND_OFFSET 0
#define CMD_BLOCK_STATUS_OFFSET 1
#define CMD_BLOCK_PARAMETERS_OFFSET 4
@@ -347,15 +337,15 @@ struct tx_desc {
#define MGMT_FRAME_BODY_OFFSET 24
#define MAX_AUTHENTICATION_RETRIES 3
-#define MAX_ASSOCIATION_RETRIES 3
+#define MAX_ASSOCIATION_RETRIES 3
#define AUTHENTICATION_RESPONSE_TIME_OUT 1000
#define MAX_WIRELESS_BODY 2316 /* mtu is 2312, CRC is 4 */
#define LOOP_RETRY_LIMIT 500000
-#define ACTIVE_MODE 1
-#define PS_MODE 2
+#define ACTIVE_MODE 1
+#define PS_MODE 2
#define MAX_ENCRYPTION_KEYS 4
#define MAX_ENCRYPTION_KEY_SIZE 40
@@ -377,7 +367,7 @@ struct tx_desc {
#define REG_DOMAIN_MKK1 0x41 //Channel 1-14 Japan(MKK1)
#define REG_DOMAIN_ISRAEL 0x50 //Channel 3-9 ISRAEL
-#define BSS_TYPE_AD_HOC 1
+#define BSS_TYPE_AD_HOC 1
#define BSS_TYPE_INFRASTRUCTURE 2
#define SCAN_TYPE_ACTIVE 0
@@ -389,7 +379,7 @@ struct tx_desc {
#define DATA_FRAME_WS_HEADER_SIZE 30
-/* promiscuous mode control */
+/* promiscuous mode control */
#define PROM_MODE_OFF 0x0
#define PROM_MODE_UNKNOWN 0x1
#define PROM_MODE_CRC_FAILED 0x2
@@ -398,8 +388,7 @@ struct tx_desc {
#define PROM_MODE_CTRL 0x10
#define PROM_MODE_BAD_PROTOCOL 0x20
-
-#define IFACE_INT_STATUS_OFFSET 0
+#define IFACE_INT_STATUS_OFFSET 0
#define IFACE_INT_MASK_OFFSET 1
#define IFACE_LOCKOUT_HOST_OFFSET 2
#define IFACE_LOCKOUT_MAC_OFFSET 3
@@ -407,7 +396,7 @@ struct tx_desc {
#define IFACE_MAC_STAT_OFFSET 30
#define IFACE_GENERIC_INT_TYPE_OFFSET 32
-#define CIPHER_SUITE_NONE 0
+#define CIPHER_SUITE_NONE 0
#define CIPHER_SUITE_WEP_64 1
#define CIPHER_SUITE_TKIP 2
#define CIPHER_SUITE_AES 3
@@ -419,11 +408,11 @@ struct tx_desc {
//
//
-// FuncCtrl field:
+// FuncCtrl field:
//
#define FUNC_CTRL_TxENABLE 0x10
#define FUNC_CTRL_RxENABLE 0x20
-#define FUNC_CTRL_INIT_COMPLETE 0x01
+#define FUNC_CTRL_INIT_COMPLETE 0x01
/* A stub firmware image which reads the MAC address from NVRAM on the card.
For copyright information and source see the end of this file. */
@@ -486,10 +475,10 @@ struct atmel_private {
struct net_device_stats stats; // device stats
spinlock_t irqlock, timerlock; // spinlocks
enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type;
- enum {
- CARD_TYPE_PARALLEL_FLASH,
+ enum {
+ CARD_TYPE_PARALLEL_FLASH,
CARD_TYPE_SPI_FLASH,
- CARD_TYPE_EEPROM
+ CARD_TYPE_EEPROM
} card_type;
int do_rx_crc; /* If we need to CRC incoming packets */
int probe_crc; /* set if we don't yet know */
@@ -497,18 +486,18 @@ struct atmel_private {
u16 rx_desc_head;
u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous;
u16 tx_free_mem, tx_buff_head, tx_buff_tail;
-
+
u16 frag_seq, frag_len, frag_no;
- u8 frag_source[6];
-
+ u8 frag_source[6];
+
u8 wep_is_on, default_key, exclude_unencrypted, encryption_level;
u8 group_cipher_suite, pairwise_cipher_suite;
u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
- int wep_key_len[MAX_ENCRYPTION_KEYS];
+ int wep_key_len[MAX_ENCRYPTION_KEYS];
int use_wpa, radio_on_broken; /* firmware dependent stuff. */
u16 host_info_base;
- struct host_info_struct {
+ struct host_info_struct {
/* NB this is matched to the hardware, don't change. */
u8 volatile int_status;
u8 volatile int_mask;
@@ -524,20 +513,20 @@ struct atmel_private {
u16 rx_buff_size;
u16 rx_desc_pos;
u16 rx_desc_count;
-
+
u16 build_version;
- u16 command_pos;
-
+ u16 command_pos;
+
u16 major_version;
u16 minor_version;
-
+
u16 func_ctrl;
u16 mac_status;
u16 generic_IRQ_type;
u8 reserved[2];
} host_info;
- enum {
+ enum {
STATION_STATE_SCANNING,
STATION_STATE_JOINNING,
STATION_STATE_AUTHENTICATING,
@@ -547,7 +536,7 @@ struct atmel_private {
STATION_STATE_DOWN,
STATION_STATE_MGMT_ERROR
} station_state;
-
+
int operating_mode, power_mode;
time_t last_qual;
int beacons_this_sec;
@@ -560,18 +549,18 @@ struct atmel_private {
int long_retry, short_retry;
int preamble;
int default_beacon_period, beacon_period, listen_interval;
- int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum;
+ int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum;
int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt;
enum {
SITE_SURVEY_IDLE,
SITE_SURVEY_IN_PROGRESS,
- SITE_SURVEY_COMPLETED
+ SITE_SURVEY_COMPLETED
} site_survey_state;
time_t last_survey;
int station_was_associated, station_is_associated;
int fast_scan;
-
+
struct bss_info {
int channel;
int SSIDsize;
@@ -584,13 +573,12 @@ struct atmel_private {
u8 SSID[MAX_SSID_LENGTH];
} BSSinfo[MAX_BSS_ENTRIES];
int BSS_list_entries, current_BSS;
- int connect_to_any_BSS;
+ int connect_to_any_BSS;
int SSID_size, new_SSID_size;
u8 CurrentBSSID[6], BSSID[6];
u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH];
u64 last_beacon_timestamp;
u8 rx_buf[MAX_WIRELESS_BODY];
-
};
static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16};
@@ -598,39 +586,49 @@ static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16};
static const struct {
int reg_domain;
int min, max;
- char *name;
+ char *name;
} channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" },
{ REG_DOMAIN_DOC, 1, 11, "Canada" },
{ REG_DOMAIN_ETSI, 1, 13, "Europe" },
{ REG_DOMAIN_SPAIN, 10, 11, "Spain" },
- { REG_DOMAIN_FRANCE, 10, 13, "France" },
+ { REG_DOMAIN_FRANCE, 10, 13, "France" },
{ REG_DOMAIN_MKK, 14, 14, "MKK" },
{ REG_DOMAIN_MKK1, 1, 14, "MKK1" },
{ REG_DOMAIN_ISRAEL, 3, 9, "Israel"} };
static void build_wpa_mib(struct atmel_private *priv);
static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len);
-static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len);
+static void atmel_copy_to_card(struct net_device *dev, u16 dest,
+ unsigned char *src, u16 len);
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest,
+ u16 src, u16 len);
static void atmel_set_gcr(struct net_device *dev, u16 mask);
static void atmel_clear_gcr(struct net_device *dev, u16 mask);
static int atmel_lock_mac(struct atmel_private *priv);
static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data);
static void atmel_command_irq(struct atmel_private *priv);
static int atmel_validate_channel(struct atmel_private *priv, int channel);
-static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
+static void atmel_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi);
static void atmel_management_timer(u_long a);
-static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size);
-static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size);
-static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
+static void atmel_send_command(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size);
+static int atmel_send_command_wait(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size);
+static void atmel_transmit_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header,
u8 *body, int body_len);
static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index);
-static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data);
-static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data);
-static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len);
-static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len);
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index,
+ u8 data);
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index,
+ u16 data);
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index,
+ u8 *data, int data_len);
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index,
+ u8 *data, int data_len);
static void atmel_scan(struct atmel_private *priv, int specific_ssid);
static void atmel_join_bss(struct atmel_private *priv, int bss_index);
static void atmel_smooth_qual(struct atmel_private *priv);
@@ -650,12 +648,12 @@ static inline u16 atmel_co(struct atmel_private *priv, u16 offset)
return priv->host_info.command_pos + offset;
}
-static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc)
+static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc)
{
return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset;
}
-static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc)
+static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc)
{
return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset;
}
@@ -682,25 +680,25 @@ static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data)
static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos)
{
- atmel_writeAR(priv->dev, pos);
+ atmel_writeAR(priv->dev, pos);
return atmel_read8(priv->dev, DR);
}
static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data)
{
- atmel_writeAR(priv->dev, pos);
+ atmel_writeAR(priv->dev, pos);
atmel_write8(priv->dev, DR, data);
}
static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos)
{
- atmel_writeAR(priv->dev, pos);
+ atmel_writeAR(priv->dev, pos);
return atmel_read16(priv->dev, DR);
}
static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data)
{
- atmel_writeAR(priv->dev, pos);
+ atmel_writeAR(priv->dev, pos);
atmel_write16(priv->dev, DR, data);
}
@@ -710,11 +708,10 @@ static void tx_done_irq(struct atmel_private *priv)
{
int i;
- for (i = 0;
+ for (i = 0;
atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE &&
i < priv->host_info.tx_desc_count;
i++) {
-
u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head));
u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head));
u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head));
@@ -728,16 +725,16 @@ static void tx_done_irq(struct atmel_private *priv)
priv->tx_buff_head = 0;
else
priv->tx_buff_head += msdu_size;
-
+
if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1))
- priv->tx_desc_head++ ;
+ priv->tx_desc_head++ ;
else
priv->tx_desc_head = 0;
-
+
if (type == TX_PACKET_TYPE_DATA) {
if (status == TX_STATUS_SUCCESS)
priv->stats.tx_packets++;
- else
+ else
priv->stats.tx_errors++;
netif_wake_queue(priv->dev);
}
@@ -748,21 +745,22 @@ static u16 find_tx_buff(struct atmel_private *priv, u16 len)
{
u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail;
- if (priv->tx_desc_free == 3 || priv->tx_free_mem < len)
+ if (priv->tx_desc_free == 3 || priv->tx_free_mem < len)
return 0;
-
+
if (bottom_free >= len)
return priv->host_info.tx_buff_pos + priv->tx_buff_tail;
-
+
if (priv->tx_free_mem - bottom_free >= len) {
priv->tx_buff_tail = 0;
return priv->host_info.tx_buff_pos;
}
-
+
return 0;
}
-static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 len, u16 buff, u8 type)
+static void tx_update_descriptor(struct atmel_private *priv, int is_bcast,
+ u16 len, u16 buff, u8 type)
{
atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff);
atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len);
@@ -775,8 +773,8 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l
int cipher_type, cipher_length;
if (is_bcast) {
cipher_type = priv->group_cipher_suite;
- if (cipher_type == CIPHER_SUITE_WEP_64 ||
- cipher_type == CIPHER_SUITE_WEP_128 )
+ if (cipher_type == CIPHER_SUITE_WEP_64 ||
+ cipher_type == CIPHER_SUITE_WEP_128)
cipher_length = 8;
else if (cipher_type == CIPHER_SUITE_TKIP)
cipher_length = 12;
@@ -790,8 +788,8 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l
}
} else {
cipher_type = priv->pairwise_cipher_suite;
- if (cipher_type == CIPHER_SUITE_WEP_64 ||
- cipher_type == CIPHER_SUITE_WEP_128 )
+ if (cipher_type == CIPHER_SUITE_WEP_64 ||
+ cipher_type == CIPHER_SUITE_WEP_128)
cipher_length = 8;
else if (cipher_type == CIPHER_SUITE_TKIP)
cipher_length = 12;
@@ -804,9 +802,9 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l
cipher_length = 0;
}
}
-
+
atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail),
- cipher_type);
+ cipher_type);
atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail),
cipher_length);
}
@@ -815,46 +813,46 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l
if (priv->tx_desc_previous != priv->tx_desc_tail)
atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0);
priv->tx_desc_previous = priv->tx_desc_tail;
- if (priv->tx_desc_tail < (priv->host_info.tx_desc_count -1 ))
+ if (priv->tx_desc_tail < (priv->host_info.tx_desc_count - 1))
priv->tx_desc_tail++;
else
priv->tx_desc_tail = 0;
priv->tx_desc_free--;
priv->tx_free_mem -= len;
-
}
-static int start_tx (struct sk_buff *skb, struct net_device *dev)
+static int start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
struct ieee80211_hdr_4addr header;
unsigned long flags;
u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-
- if (priv->card && priv->present_callback &&
+
+ if (priv->card && priv->present_callback &&
!(*priv->present_callback)(priv->card)) {
priv->stats.tx_errors++;
dev_kfree_skb(skb);
return 0;
}
-
+
if (priv->station_state != STATION_STATE_READY) {
priv->stats.tx_errors++;
dev_kfree_skb(skb);
return 0;
}
-
+
/* first ensure the timer func cannot run */
- spin_lock_bh(&priv->timerlock);
+ spin_lock_bh(&priv->timerlock);
/* then stop the hardware ISR */
- spin_lock_irqsave(&priv->irqlock, flags);
+ spin_lock_irqsave(&priv->irqlock, flags);
/* nb doing the above in the opposite order will deadlock */
-
+
/* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the
- 12 first bytes (containing DA/SA) and put them in the appropriate fields of
- the Wireless Header. Thus the packet length is then the initial + 18 (+30-12) */
-
+ 12 first bytes (containing DA/SA) and put them in the appropriate
+ fields of the Wireless Header. Thus the packet length is then the
+ initial + 18 (+30-12) */
+
if (!(buff = find_tx_buff(priv, len + 18))) {
priv->stats.tx_dropped++;
spin_unlock_irqrestore(&priv->irqlock, flags);
@@ -862,7 +860,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev)
netif_stop_queue(dev);
return 1;
}
-
+
frame_ctl = IEEE80211_FTYPE_DATA;
header.duration_id = 0;
header.seq_ctl = 0;
@@ -878,7 +876,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev)
memcpy(&header.addr2, dev->dev_addr, 6);
memcpy(&header.addr3, skb->data, 6);
}
-
+
if (priv->use_wpa)
memcpy(&header.addr4, SNAP_RFC1024, 6);
@@ -888,27 +886,27 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev)
/* Copy the packet sans its 802.3 header addresses which have been replaced */
atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12);
priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE;
-
+
/* low bit of first byte of destination tells us if broadcast */
tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA);
dev->trans_start = jiffies;
priv->stats.tx_bytes += len;
-
+
spin_unlock_irqrestore(&priv->irqlock, flags);
spin_unlock_bh(&priv->timerlock);
dev_kfree_skb(skb);
-
- return 0;
+
+ return 0;
}
-static void atmel_transmit_management_frame(struct atmel_private *priv,
+static void atmel_transmit_management_frame(struct atmel_private *priv,
struct ieee80211_hdr_4addr *header,
u8 *body, int body_len)
{
u16 buff;
- int len = MGMT_FRAME_BODY_OFFSET + body_len;
-
- if (!(buff = find_tx_buff(priv, len)))
+ int len = MGMT_FRAME_BODY_OFFSET + body_len;
+
+ if (!(buff = find_tx_buff(priv, len)))
return;
atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET);
@@ -916,24 +914,25 @@ static void atmel_transmit_management_frame(struct atmel_private *priv,
priv->tx_buff_tail += len;
tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT);
}
-
-static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
+
+static void fast_rx_path(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header,
u16 msdu_size, u16 rx_packet_loc, u32 crc)
{
/* fast path: unfragmented packet copy directly into skbuf */
- u8 mac4[6];
- struct sk_buff *skb;
+ u8 mac4[6];
+ struct sk_buff *skb;
unsigned char *skbp;
-
+
/* get the final, mac 4 header field, this tells us encapsulation */
atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6);
msdu_size -= 6;
-
+
if (priv->do_rx_crc) {
crc = crc32_le(crc, mac4, 6);
msdu_size -= 4;
}
-
+
if (!(skb = dev_alloc_skb(msdu_size + 14))) {
priv->stats.rx_dropped++;
return;
@@ -942,7 +941,7 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr
skb_reserve(skb, 2);
skbp = skb_put(skb, msdu_size + 12);
atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size);
-
+
if (priv->do_rx_crc) {
u32 netcrc;
crc = crc32_le(crc, skbp + 12, msdu_size);
@@ -953,24 +952,25 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr
return;
}
}
-
+
memcpy(skbp, header->addr1, 6); /* destination address */
- if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
+ if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
memcpy(&skbp[6], header->addr3, 6);
else
memcpy(&skbp[6], header->addr2, 6); /* source address */
-
- priv->dev->last_rx=jiffies;
+
+ priv->dev->last_rx = jiffies;
skb->dev = priv->dev;
skb->protocol = eth_type_trans(skb, priv->dev);
- skb->ip_summed = CHECKSUM_NONE;
+ skb->ip_summed = CHECKSUM_NONE;
netif_rx(skb);
priv->stats.rx_bytes += 12 + msdu_size;
priv->stats.rx_packets++;
}
/* Test to see if the packet in card memory at packet_loc has a valid CRC
- It doesn't matter that this is slow: it is only used to proble the first few packets. */
+ It doesn't matter that this is slow: it is only used to proble the first few
+ packets. */
static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size)
{
int i = msdu_size - 4;
@@ -980,7 +980,7 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size)
return 0;
atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4);
-
+
atmel_writeAR(priv->dev, packet_loc);
while (i--) {
u8 octet = atmel_read8(priv->dev, DR);
@@ -990,20 +990,22 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size)
return (crc ^ 0xffffffff) == netcrc;
}
-static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
- u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags)
+static void frag_rx_path(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header,
+ u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no,
+ u8 frag_no, int more_frags)
{
- u8 mac4[6];
+ u8 mac4[6];
u8 source[6];
struct sk_buff *skb;
- if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
+ if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
memcpy(source, header->addr3, 6);
else
- memcpy(source, header->addr2, 6);
-
+ memcpy(source, header->addr2, 6);
+
rx_packet_loc += 24; /* skip header */
-
+
if (priv->do_rx_crc)
msdu_size -= 4;
@@ -1012,16 +1014,16 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr
msdu_size -= 6;
rx_packet_loc += 6;
- if (priv->do_rx_crc)
+ if (priv->do_rx_crc)
crc = crc32_le(crc, mac4, 6);
-
+
priv->frag_seq = seq_no;
priv->frag_no = 1;
priv->frag_len = msdu_size;
- memcpy(priv->frag_source, source, 6);
+ memcpy(priv->frag_source, source, 6);
memcpy(&priv->rx_buf[6], source, 6);
memcpy(priv->rx_buf, header->addr1, 6);
-
+
atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size);
if (priv->do_rx_crc) {
@@ -1033,17 +1035,17 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr
memset(priv->frag_source, 0xff, 6);
}
}
-
+
} else if (priv->frag_no == frag_no &&
priv->frag_seq == seq_no &&
memcmp(priv->frag_source, source, 6) == 0) {
-
- atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len],
+
+ atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len],
rx_packet_loc, msdu_size);
if (priv->do_rx_crc) {
u32 netcrc;
- crc = crc32_le(crc,
- &priv->rx_buf[12 + priv->frag_len],
+ crc = crc32_le(crc,
+ &priv->rx_buf[12 + priv->frag_len],
msdu_size);
atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
if ((crc ^ 0xffffffff) != netcrc) {
@@ -1052,7 +1054,7 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr
more_frags = 1; /* don't send broken assembly */
}
}
-
+
priv->frag_len += msdu_size;
priv->frag_no++;
@@ -1062,60 +1064,60 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr
priv->stats.rx_dropped++;
} else {
skb_reserve(skb, 2);
- memcpy(skb_put(skb, priv->frag_len + 12),
+ memcpy(skb_put(skb, priv->frag_len + 12),
priv->rx_buf,
priv->frag_len + 12);
priv->dev->last_rx = jiffies;
skb->dev = priv->dev;
skb->protocol = eth_type_trans(skb, priv->dev);
- skb->ip_summed = CHECKSUM_NONE;
+ skb->ip_summed = CHECKSUM_NONE;
netif_rx(skb);
priv->stats.rx_bytes += priv->frag_len + 12;
priv->stats.rx_packets++;
}
}
-
} else
priv->wstats.discard.fragment++;
}
-
+
static void rx_done_irq(struct atmel_private *priv)
{
int i;
struct ieee80211_hdr_4addr header;
-
- for (i = 0;
+
+ for (i = 0;
atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID &&
i < priv->host_info.rx_desc_count;
i++) {
-
+
u16 msdu_size, rx_packet_loc, frame_ctl, seq_control;
u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head));
u32 crc = 0xffffffff;
-
+
if (status != RX_STATUS_SUCCESS) {
if (status == 0xc1) /* determined by experiment */
priv->wstats.discard.nwid++;
else
- priv->stats.rx_errors++;
+ priv->stats.rx_errors++;
goto next;
}
msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head));
rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head));
-
+
if (msdu_size < 30) {
- priv->stats.rx_errors++;
+ priv->stats.rx_errors++;
goto next;
}
-
+
/* Get header as far as end of seq_ctl */
atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24);
frame_ctl = le16_to_cpu(header.frame_ctl);
seq_control = le16_to_cpu(header.seq_ctl);
- /* probe for CRC use here if needed once five packets have arrived with
- the same crc status, we assume we know what's happening and stop probing */
+ /* probe for CRC use here if needed once five packets have
+ arrived with the same crc status, we assume we know what's
+ happening and stop probing */
if (priv->probe_crc) {
if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED)) {
priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size);
@@ -1130,34 +1132,33 @@ static void rx_done_irq(struct atmel_private *priv)
priv->probe_crc = 0;
}
}
-
+
/* don't CRC header when WEP in use */
if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED))) {
crc = crc32_le(0xffffffff, (unsigned char *)&header, 24);
}
msdu_size -= 24; /* header */
- if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
-
+ if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS;
u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG;
u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4;
-
- if (!more_fragments && packet_fragment_no == 0 ) {
+
+ if (!more_fragments && packet_fragment_no == 0) {
fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc);
} else {
frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc,
packet_sequence_no, packet_fragment_no, more_fragments);
}
}
-
+
if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
/* copy rest of packet into buffer */
atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size);
-
+
/* we use the same buffer for frag reassembly and control packets */
memset(priv->frag_source, 0xff, 6);
-
+
if (priv->do_rx_crc) {
/* last 4 octets is crc */
msdu_size -= 4;
@@ -1170,18 +1171,18 @@ static void rx_done_irq(struct atmel_private *priv)
atmel_management_frame(priv, &header, msdu_size,
atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head)));
- }
+ }
- next:
+next:
/* release descriptor */
- atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED);
-
+ atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED);
+
if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1))
- priv->rx_desc_head++;
+ priv->rx_desc_head++;
else
priv->rx_desc_head = 0;
}
-}
+}
static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -1189,7 +1190,7 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs
struct atmel_private *priv = netdev_priv(dev);
u8 isr;
int i = -1;
- static u8 irq_order[] = {
+ static u8 irq_order[] = {
ISR_OUT_OF_RANGE,
ISR_RxCOMPLETE,
ISR_TxCOMPLETE,
@@ -1199,20 +1200,19 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs
ISR_IBSS_MERGE,
ISR_GENERIC_IRQ
};
-
- if (priv->card && priv->present_callback &&
+ if (priv->card && priv->present_callback &&
!(*priv->present_callback)(priv->card))
return IRQ_HANDLED;
/* In this state upper-level code assumes it can mess with
the card unhampered by interrupts which may change register state.
Note that even though the card shouldn't generate interrupts
- the inturrupt line may be shared. This allows card setup
+ the inturrupt line may be shared. This allows card setup
to go on without disabling interrupts for a long time. */
if (priv->station_state == STATION_STATE_DOWN)
return IRQ_NONE;
-
+
atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
while (1) {
@@ -1221,36 +1221,36 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs
printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
return IRQ_HANDLED;
}
-
+
isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
-
+
if (!isr) {
atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
return i == -1 ? IRQ_NONE : IRQ_HANDLED;
}
-
+
atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */
-
+
for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++)
if (isr & irq_order[i])
break;
-
+
if (!atmel_lock_mac(priv)) {
/* failed to contact card */
printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
return IRQ_HANDLED;
}
-
+
isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
isr ^= irq_order[i];
atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr);
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
-
+
switch (irq_order[i]) {
-
- case ISR_OUT_OF_RANGE:
- if (priv->operating_mode == IW_MODE_INFRA &&
+
+ case ISR_OUT_OF_RANGE:
+ if (priv->operating_mode == IW_MODE_INFRA &&
priv->station_state == STATION_STATE_READY) {
priv->station_is_associated = 0;
atmel_scan(priv, 1);
@@ -1261,24 +1261,24 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs
priv->wstats.discard.misc++;
/* fall through */
case ISR_RxCOMPLETE:
- rx_done_irq(priv);
+ rx_done_irq(priv);
break;
-
+
case ISR_TxCOMPLETE:
- tx_done_irq(priv);
+ tx_done_irq(priv);
break;
-
+
case ISR_FATAL_ERROR:
printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name);
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
break;
-
- case ISR_COMMAND_COMPLETE:
+
+ case ISR_COMMAND_COMPLETE:
atmel_command_irq(priv);
break;
case ISR_IBSS_MERGE:
- atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+ atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
priv->CurrentBSSID, 6);
/* The WPA stuff cares about the current AP address */
if (priv->use_wpa)
@@ -1288,24 +1288,23 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs
printk(KERN_INFO "%s: Generic_irq received.\n", dev->name);
break;
}
- }
+ }
}
-
-static struct net_device_stats *atmel_get_stats (struct net_device *dev)
+static struct net_device_stats *atmel_get_stats(struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
return &priv->stats;
}
-static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev)
+static struct iw_statistics *atmel_get_wireless_stats(struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
- /* update the link quality here in case we are seeing no beacons
+ /* update the link quality here in case we are seeing no beacons
at all to drive the process */
atmel_smooth_qual(priv);
-
+
priv->wstats.status = priv->station_state;
if (priv->operating_mode == IW_MODE_INFRA) {
@@ -1328,8 +1327,8 @@ static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev)
| IW_QUAL_NOISE_INVALID;
priv->wstats.miss.beacon = 0;
}
-
- return (&priv->wstats);
+
+ return &priv->wstats;
}
static int atmel_change_mtu(struct net_device *dev, int new_mtu)
@@ -1343,21 +1342,21 @@ static int atmel_change_mtu(struct net_device *dev, int new_mtu)
static int atmel_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
-
+
memcpy (dev->dev_addr, addr->sa_data, dev->addr_len);
return atmel_open(dev);
}
EXPORT_SYMBOL(atmel_open);
-int atmel_open (struct net_device *dev)
+int atmel_open(struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
int i, channel;
/* any scheduled timer is no longer needed and might screw things up.. */
del_timer_sync(&priv->management_timer);
-
+
/* Interrupts will not touch the card once in this state... */
priv->station_state = STATION_STATE_DOWN;
@@ -1377,7 +1376,7 @@ int atmel_open (struct net_device *dev)
priv->site_survey_state = SITE_SURVEY_IDLE;
priv->station_is_associated = 0;
- if (!reset_atmel_card(dev))
+ if (!reset_atmel_card(dev))
return -EAGAIN;
if (priv->config_reg_domain) {
@@ -1391,26 +1390,26 @@ int atmel_open (struct net_device *dev)
if (i == sizeof(channel_table)/sizeof(channel_table[0])) {
priv->reg_domain = REG_DOMAIN_MKK1;
printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
- }
+ }
}
-
+
if ((channel = atmel_validate_channel(priv, priv->channel)))
priv->channel = channel;
- /* this moves station_state on.... */
- atmel_scan(priv, 1);
+ /* this moves station_state on.... */
+ atmel_scan(priv, 1);
atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */
return 0;
}
-static int atmel_close (struct net_device *dev)
+static int atmel_close(struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
-
+
atmel_enter_state(priv, STATION_STATE_DOWN);
-
- if (priv->bus_type == BUS_TYPE_PCCARD)
+
+ if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
atmel_write16(dev, GCR, 0x0040);
return 0;
@@ -1438,43 +1437,46 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv)
int i;
char *p = buf;
char *s, *r, *c;
-
- p += sprintf(p, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR);
-
+
+ p += sprintf(p, "Driver version:\t\t%d.%d\n",
+ DRIVER_MAJOR, DRIVER_MINOR);
+
if (priv->station_state != STATION_STATE_DOWN) {
- p += sprintf(p, "Firmware version:\t%d.%d build %d\nFirmware location:\t",
+ p += sprintf(p, "Firmware version:\t%d.%d build %d\n"
+ "Firmware location:\t",
priv->host_info.major_version,
priv->host_info.minor_version,
priv->host_info.build_version);
-
- if (priv->card_type != CARD_TYPE_EEPROM)
+
+ if (priv->card_type != CARD_TYPE_EEPROM)
p += sprintf(p, "on card\n");
- else if (priv->firmware)
- p += sprintf(p, "%s loaded by host\n", priv->firmware_id);
+ else if (priv->firmware)
+ p += sprintf(p, "%s loaded by host\n",
+ priv->firmware_id);
else
- p += sprintf(p, "%s loaded by hotplug\n", priv->firmware_id);
-
- switch(priv->card_type) {
+ p += sprintf(p, "%s loaded by hotplug\n",
+ priv->firmware_id);
+
+ switch (priv->card_type) {
case CARD_TYPE_PARALLEL_FLASH: c = "Parallel flash"; break;
case CARD_TYPE_SPI_FLASH: c = "SPI flash\n"; break;
case CARD_TYPE_EEPROM: c = "EEPROM"; break;
default: c = "<unknown>";
}
-
r = "<unknown>";
for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
if (priv->reg_domain == channel_table[i].reg_domain)
r = channel_table[i].name;
-
+
p += sprintf(p, "MAC memory type:\t%s\n", c);
p += sprintf(p, "Regulatory domain:\t%s\n", r);
- p += sprintf(p, "Host CRC checking:\t%s\n",
+ p += sprintf(p, "Host CRC checking:\t%s\n",
priv->do_rx_crc ? "On" : "Off");
p += sprintf(p, "WPA-capable firmware:\t%s\n",
priv->use_wpa ? "Yes" : "No");
}
-
+
switch(priv->station_state) {
case STATION_STATE_SCANNING: s = "Scanning"; break;
case STATION_STATE_JOINNING: s = "Joining"; break;
@@ -1486,9 +1488,9 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv)
case STATION_STATE_DOWN: s = "Down"; break;
default: s = "<unknown>";
}
-
+
p += sprintf(p, "Current state:\t\t%s\n", s);
- return p - buf;
+ return p - buf;
}
static int atmel_read_proc(char *page, char **start, off_t off,
@@ -1504,9 +1506,12 @@ static int atmel_read_proc(char *page, char **start, off_t off,
return len;
}
-struct net_device *init_atmel_card( unsigned short irq, unsigned long port, const AtmelFWType fw_type,
- struct device *sys_dev, int (*card_present)(void *), void *card)
+struct net_device *init_atmel_card(unsigned short irq, unsigned long port,
+ const AtmelFWType fw_type,
+ struct device *sys_dev,
+ int (*card_present)(void *), void *card)
{
+ struct proc_dir_entry *ent;
struct net_device *dev;
struct atmel_private *priv;
int rc;
@@ -1514,11 +1519,11 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons
/* Create the network device object. */
dev = alloc_etherdev(sizeof(*priv));
if (!dev) {
- printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n");
+ printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n");
return NULL;
}
if (dev_alloc_name(dev, dev->name) < 0) {
- printk(KERN_ERR "atmel: Couldn't get name!\n");
+ printk(KERN_ERR "atmel: Couldn't get name!\n");
goto err_out_free;
}
@@ -1550,7 +1555,7 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons
memset(priv->BSSID, 0, 6);
priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */
priv->station_was_associated = 0;
-
+
priv->last_survey = jiffies;
priv->preamble = LONG_PREAMBLE;
priv->operating_mode = IW_MODE_INFRA;
@@ -1586,7 +1591,7 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons
spin_lock_init(&priv->timerlock);
priv->management_timer.function = atmel_management_timer;
priv->management_timer.data = (unsigned long) dev;
-
+
dev->open = atmel_open;
dev->stop = atmel_close;
dev->change_mtu = atmel_change_mtu;
@@ -1597,44 +1602,46 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons
dev->do_ioctl = atmel_ioctl;
dev->irq = irq;
dev->base_addr = port;
-
+
SET_NETDEV_DEV(dev, sys_dev);
-
+
if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) {
- printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc );
+ printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc);
goto err_out_free;
}
- if (!request_region(dev->base_addr, 32,
+ if (!request_region(dev->base_addr, 32,
priv->bus_type == BUS_TYPE_PCCARD ? "atmel_cs" : "atmel_pci")) {
goto err_out_irq;
}
-
+
if (register_netdev(dev))
goto err_out_res;
-
+
if (!probe_atmel_card(dev)){
unregister_netdev(dev);
goto err_out_res;
}
-
+
netif_carrier_off(dev);
-
- create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv);
-
+
+ ent = create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv);
+ if (!ent)
+ printk(KERN_WARNING "atmel: unable to create /proc entry.\n");
+
printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
dev->name, DRIVER_MAJOR, DRIVER_MINOR,
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] );
-
+
SET_MODULE_OWNER(dev);
return dev;
-
- err_out_res:
+
+err_out_res:
release_region( dev->base_addr, 32);
- err_out_irq:
+err_out_irq:
free_irq(dev->irq, dev);
- err_out_free:
+err_out_free:
free_netdev(dev);
return NULL;
}
@@ -1644,12 +1651,12 @@ EXPORT_SYMBOL(init_atmel_card);
void stop_atmel_card(struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
-
+
/* put a brick on it... */
- if (priv->bus_type == BUS_TYPE_PCCARD)
+ if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
atmel_write16(dev, GCR, 0x0040);
-
+
del_timer_sync(&priv->management_timer);
unregister_netdev(dev);
remove_proc_entry("driver/atmel", NULL);
@@ -1675,13 +1682,13 @@ static int atmel_set_essid(struct net_device *dev,
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
priv->connect_to_any_BSS = 0;
-
+
/* Check the size of the string */
if (dwrq->length > MAX_SSID_LENGTH + 1)
- return -E2BIG ;
+ return -E2BIG;
if (index != 0)
return -EINVAL;
-
+
memcpy(priv->new_SSID, extra, dwrq->length - 1);
priv->new_SSID_size = dwrq->length - 1;
}
@@ -1706,7 +1713,7 @@ static int atmel_get_essid(struct net_device *dev,
extra[priv->SSID_size] = '\0';
dwrq->length = priv->SSID_size + 1;
}
-
+
dwrq->flags = !priv->connect_to_any_BSS; /* active */
return 0;
@@ -1768,7 +1775,7 @@ static int atmel_set_encode(struct net_device *dev,
/* WE specify that if a valid key is set, encryption
* should be enabled (user may turn it off later)
* This is also how "iwconfig ethX key on" works */
- if (index == current_index &&
+ if (index == current_index &&
priv->wep_key_len[index] > 0) {
priv->wep_is_on = 1;
priv->exclude_unencrypted = 1;
@@ -1783,18 +1790,18 @@ static int atmel_set_encode(struct net_device *dev,
} else {
/* Do we want to just set the transmit key index ? */
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
- if ( index>=0 && index < 4 ) {
+ if (index >= 0 && index < 4) {
priv->default_key = index;
} else
/* Don't complain if only change the mode */
- if(!dwrq->flags & IW_ENCODE_MODE) {
+ if (!dwrq->flags & IW_ENCODE_MODE) {
return -EINVAL;
}
}
/* Read the flags */
- if(dwrq->flags & IW_ENCODE_DISABLED) {
+ if (dwrq->flags & IW_ENCODE_DISABLED) {
priv->wep_is_on = 0;
- priv->encryption_level = 0;
+ priv->encryption_level = 0;
priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
} else {
priv->wep_is_on = 1;
@@ -1806,15 +1813,14 @@ static int atmel_set_encode(struct net_device *dev,
priv->encryption_level = 1;
}
}
- if(dwrq->flags & IW_ENCODE_RESTRICTED)
+ if (dwrq->flags & IW_ENCODE_RESTRICTED)
priv->exclude_unencrypted = 1;
- if(dwrq->flags & IW_ENCODE_OPEN)
+ if(dwrq->flags & IW_ENCODE_OPEN)
priv->exclude_unencrypted = 0;
-
+
return -EINPROGRESS; /* Call commit handler */
}
-
static int atmel_get_encode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *dwrq,
@@ -1822,7 +1828,7 @@ static int atmel_get_encode(struct net_device *dev,
{
struct atmel_private *priv = netdev_priv(dev);
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-
+
if (!priv->wep_is_on)
dwrq->flags = IW_ENCODE_DISABLED;
else {
@@ -1843,7 +1849,7 @@ static int atmel_get_encode(struct net_device *dev,
memset(extra, 0, 16);
memcpy(extra, priv->wep_keys[index], dwrq->length);
}
-
+
return 0;
}
@@ -1862,17 +1868,17 @@ static int atmel_set_rate(struct net_device *dev,
char *extra)
{
struct atmel_private *priv = netdev_priv(dev);
-
+
if (vwrq->fixed == 0) {
priv->tx_rate = 3;
priv->auto_tx_rate = 1;
} else {
priv->auto_tx_rate = 0;
-
+
/* Which type of value ? */
- if((vwrq->value < 4) && (vwrq->value >= 0)) {
+ if ((vwrq->value < 4) && (vwrq->value >= 0)) {
/* Setting by rate index */
- priv->tx_rate = vwrq->value;
+ priv->tx_rate = vwrq->value;
} else {
/* Setting by frequency value */
switch (vwrq->value) {
@@ -1899,7 +1905,7 @@ static int atmel_set_mode(struct net_device *dev,
return -EINVAL;
priv->operating_mode = *uwrq;
- return -EINPROGRESS;
+ return -EINPROGRESS;
}
static int atmel_get_mode(struct net_device *dev,
@@ -1908,7 +1914,7 @@ static int atmel_get_mode(struct net_device *dev,
char *extra)
{
struct atmel_private *priv = netdev_priv(dev);
-
+
*uwrq = priv->operating_mode;
return 0;
}
@@ -1962,9 +1968,9 @@ static int atmel_set_retry(struct net_device *dev,
char *extra)
{
struct atmel_private *priv = netdev_priv(dev);
-
- if(!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) {
- if(vwrq->flags & IW_RETRY_MAX)
+
+ if (!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) {
+ if (vwrq->flags & IW_RETRY_MAX)
priv->long_retry = vwrq->value;
else if (vwrq->flags & IW_RETRY_MIN)
priv->short_retry = vwrq->value;
@@ -1973,9 +1979,9 @@ static int atmel_set_retry(struct net_device *dev,
priv->long_retry = vwrq->value;
priv->short_retry = vwrq->value;
}
- return -EINPROGRESS;
+ return -EINPROGRESS;
}
-
+
return -EINVAL;
}
@@ -1989,13 +1995,13 @@ static int atmel_get_retry(struct net_device *dev,
vwrq->disabled = 0; /* Can't be disabled */
/* Note : by default, display the min retry number */
- if((vwrq->flags & IW_RETRY_MAX)) {
+ if (vwrq->flags & IW_RETRY_MAX) {
vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
vwrq->value = priv->long_retry;
} else {
vwrq->flags = IW_RETRY_LIMIT;
vwrq->value = priv->short_retry;
- if(priv->long_retry != priv->short_retry)
+ if (priv->long_retry != priv->short_retry)
vwrq->flags |= IW_RETRY_MIN;
}
@@ -2010,13 +2016,13 @@ static int atmel_set_rts(struct net_device *dev,
struct atmel_private *priv = netdev_priv(dev);
int rthr = vwrq->value;
- if(vwrq->disabled)
+ if (vwrq->disabled)
rthr = 2347;
- if((rthr < 0) || (rthr > 2347)) {
+ if ((rthr < 0) || (rthr > 2347)) {
return -EINVAL;
}
priv->rts_threshold = rthr;
-
+
return -EINPROGRESS; /* Call commit handler */
}
@@ -2026,7 +2032,7 @@ static int atmel_get_rts(struct net_device *dev,
char *extra)
{
struct atmel_private *priv = netdev_priv(dev);
-
+
vwrq->value = priv->rts_threshold;
vwrq->disabled = (vwrq->value >= 2347);
vwrq->fixed = 1;
@@ -2042,14 +2048,14 @@ static int atmel_set_frag(struct net_device *dev,
struct atmel_private *priv = netdev_priv(dev);
int fthr = vwrq->value;
- if(vwrq->disabled)
+ if (vwrq->disabled)
fthr = 2346;
- if((fthr < 256) || (fthr > 2346)) {
+ if ((fthr < 256) || (fthr > 2346)) {
return -EINVAL;
}
fthr &= ~0x1; /* Get an even value - is it really needed ??? */
priv->frag_threshold = fthr;
-
+
return -EINPROGRESS; /* Call commit handler */
}
@@ -2077,21 +2083,21 @@ static int atmel_set_freq(struct net_device *dev,
{
struct atmel_private *priv = netdev_priv(dev);
int rc = -EINPROGRESS; /* Call commit handler */
-
+
/* If setting by frequency, convert to a channel */
- if((fwrq->e == 1) &&
- (fwrq->m >= (int) 241200000) &&
- (fwrq->m <= (int) 248700000)) {
+ if ((fwrq->e == 1) &&
+ (fwrq->m >= (int) 241200000) &&
+ (fwrq->m <= (int) 248700000)) {
int f = fwrq->m / 100000;
int c = 0;
- while((c < 14) && (f != frequency_list[c]))
+ while ((c < 14) && (f != frequency_list[c]))
c++;
/* Hack to fall through... */
fwrq->e = 0;
fwrq->m = c + 1;
}
/* Setting by channel number */
- if((fwrq->m > 1000) || (fwrq->e > 0))
+ if ((fwrq->m > 1000) || (fwrq->e > 0))
rc = -EOPNOTSUPP;
else {
int channel = fwrq->m;
@@ -2099,7 +2105,7 @@ static int atmel_set_freq(struct net_device *dev,
priv->channel = channel;
} else {
rc = -EINVAL;
- }
+ }
}
return rc;
}
@@ -2130,7 +2136,7 @@ static int atmel_set_scan(struct net_device *dev,
* This is not an error, while the device perform scanning,
* traffic doesn't flow, so it's a perfect DoS...
* Jean II */
-
+
if (priv->station_state == STATION_STATE_DOWN)
return -EAGAIN;
@@ -2142,15 +2148,15 @@ static int atmel_set_scan(struct net_device *dev,
/* Initiate a scan command */
if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS)
return -EBUSY;
-
+
del_timer_sync(&priv->management_timer);
spin_lock_irqsave(&priv->irqlock, flags);
-
+
priv->site_survey_state = SITE_SURVEY_IN_PROGRESS;
priv->fast_scan = 0;
atmel_scan(priv, 0);
spin_unlock_irqrestore(&priv->irqlock, flags);
-
+
return 0;
}
@@ -2163,11 +2169,11 @@ static int atmel_get_scan(struct net_device *dev,
int i;
char *current_ev = extra;
struct iw_event iwe;
-
+
if (priv->site_survey_state != SITE_SURVEY_COMPLETED)
return -EAGAIN;
-
- for(i=0; i<priv->BSS_list_entries; i++) {
+
+ for (i = 0; i < priv->BSS_list_entries; i++) {
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6);
@@ -2179,16 +2185,16 @@ static int atmel_get_scan(struct net_device *dev,
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID);
-
+
iwe.cmd = SIOCGIWMODE;
iwe.u.mode = priv->BSSinfo[i].BSStype;
current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN);
-
+
iwe.cmd = SIOCGIWFREQ;
iwe.u.freq.m = priv->BSSinfo[i].channel;
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN);
-
+
iwe.cmd = SIOCGIWENCODE;
if (priv->BSSinfo[i].UsingWEP)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
@@ -2196,13 +2202,12 @@ static int atmel_get_scan(struct net_device *dev,
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL);
-
}
/* Length of data */
dwrq->length = (current_ev - extra);
- dwrq->flags = 0;
-
+ dwrq->flags = 0;
+
return 0;
}
@@ -2213,7 +2218,7 @@ static int atmel_get_range(struct net_device *dev,
{
struct atmel_private *priv = netdev_priv(dev);
struct iw_range *range = (struct iw_range *) extra;
- int k,i,j;
+ int k, i, j;
dwrq->length = sizeof(struct iw_range);
memset(range, 0, sizeof(struct iw_range));
@@ -2226,14 +2231,14 @@ static int atmel_get_range(struct net_device *dev,
break;
}
if (range->num_channels != 0) {
- for(k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) {
+ for (k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) {
range->freq[k].i = i; /* List index */
- range->freq[k].m = frequency_list[i-1] * 100000;
+ range->freq[k].m = frequency_list[i - 1] * 100000;
range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */
}
range->num_frequency = k;
}
-
+
range->max_qual.qual = 100;
range->max_qual.level = 100;
range->max_qual.noise = 0;
@@ -2261,11 +2266,11 @@ static int atmel_get_range(struct net_device *dev,
range->encoding_size[1] = 13;
range->num_encoding_sizes = 2;
range->max_encoding_tokens = 4;
-
+
range->pmp_flags = IW_POWER_ON;
range->pmt_flags = IW_POWER_ON;
range->pm_capa = 0;
-
+
range->we_version_source = WIRELESS_EXT;
range->we_version_compiled = WIRELESS_EXT;
range->retry_capa = IW_RETRY_LIMIT ;
@@ -2289,7 +2294,7 @@ static int atmel_set_wap(struct net_device *dev,
if (awrq->sa_family != ARPHRD_ETHER)
return -EINVAL;
-
+
if (memcmp(bcast, awrq->sa_data, 6) == 0) {
del_timer_sync(&priv->management_timer);
spin_lock_irqsave(&priv->irqlock, flags);
@@ -2297,8 +2302,8 @@ static int atmel_set_wap(struct net_device *dev,
spin_unlock_irqrestore(&priv->irqlock, flags);
return 0;
}
-
- for(i=0; i<priv->BSS_list_entries; i++) {
+
+ for (i = 0; i < priv->BSS_list_entries; i++) {
if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) {
if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) {
return -EINVAL;
@@ -2313,10 +2318,10 @@ static int atmel_set_wap(struct net_device *dev,
}
}
}
-
+
return -EINVAL;
}
-
+
static int atmel_config_commit(struct net_device *dev,
struct iw_request_info *info, /* NULL */
void *zwrq, /* NULL */
@@ -2325,18 +2330,18 @@ static int atmel_config_commit(struct net_device *dev,
return atmel_open(dev);
}
-static const iw_handler atmel_handler[] =
+static const iw_handler atmel_handler[] =
{
(iw_handler) atmel_config_commit, /* SIOCSIWCOMMIT */
- (iw_handler) atmel_get_name, /* SIOCGIWNAME */
+ (iw_handler) atmel_get_name, /* SIOCGIWNAME */
(iw_handler) NULL, /* SIOCSIWNWID */
(iw_handler) NULL, /* SIOCGIWNWID */
(iw_handler) atmel_set_freq, /* SIOCSIWFREQ */
(iw_handler) atmel_get_freq, /* SIOCGIWFREQ */
(iw_handler) atmel_set_mode, /* SIOCSIWMODE */
(iw_handler) atmel_get_mode, /* SIOCGIWMODE */
- (iw_handler) NULL, /* SIOCSIWSENS */
- (iw_handler) NULL, /* SIOCGIWSENS */
+ (iw_handler) NULL, /* SIOCSIWSENS */
+ (iw_handler) NULL, /* SIOCGIWSENS */
(iw_handler) NULL, /* SIOCSIWRANGE */
(iw_handler) atmel_get_range, /* SIOCGIWRANGE */
(iw_handler) NULL, /* SIOCSIWPRIV */
@@ -2350,13 +2355,13 @@ static const iw_handler atmel_handler[] =
(iw_handler) atmel_set_wap, /* SIOCSIWAP */
(iw_handler) atmel_get_wap, /* SIOCGIWAP */
(iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCGIWAPLIST */
+ (iw_handler) NULL, /* SIOCGIWAPLIST */
(iw_handler) atmel_set_scan, /* SIOCSIWSCAN */
(iw_handler) atmel_get_scan, /* SIOCGIWSCAN */
(iw_handler) atmel_set_essid, /* SIOCSIWESSID */
(iw_handler) atmel_get_essid, /* SIOCGIWESSID */
- (iw_handler) NULL, /* SIOCSIWNICKN */
- (iw_handler) NULL, /* SIOCGIWNICKN */
+ (iw_handler) NULL, /* SIOCSIWNICKN */
+ (iw_handler) NULL, /* SIOCGIWNICKN */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) atmel_set_rate, /* SIOCSIWRATE */
@@ -2365,8 +2370,8 @@ static const iw_handler atmel_handler[] =
(iw_handler) atmel_get_rts, /* SIOCGIWRTS */
(iw_handler) atmel_set_frag, /* SIOCSIWFRAG */
(iw_handler) atmel_get_frag, /* SIOCGIWFRAG */
- (iw_handler) NULL, /* SIOCSIWTXPOW */
- (iw_handler) NULL, /* SIOCGIWTXPOW */
+ (iw_handler) NULL, /* SIOCSIWTXPOW */
+ (iw_handler) NULL, /* SIOCGIWTXPOW */
(iw_handler) atmel_set_retry, /* SIOCSIWRETRY */
(iw_handler) atmel_get_retry, /* SIOCGIWRETRY */
(iw_handler) atmel_set_encode, /* SIOCSIWENCODE */
@@ -2375,39 +2380,51 @@ static const iw_handler atmel_handler[] =
(iw_handler) atmel_get_power, /* SIOCGIWPOWER */
};
-
-static const iw_handler atmel_private_handler[] =
+static const iw_handler atmel_private_handler[] =
{
NULL, /* SIOCIWFIRSTPRIV */
};
typedef struct atmel_priv_ioctl {
char id[32];
- unsigned char __user *data;
- unsigned short len;
+ unsigned char __user *data;
+ unsigned short len;
} atmel_priv_ioctl;
-
-#define ATMELFWL SIOCIWFIRSTPRIV
-#define ATMELIDIFC ATMELFWL + 1
-#define ATMELRD ATMELFWL + 2
-#define ATMELMAGIC 0x51807
+#define ATMELFWL SIOCIWFIRSTPRIV
+#define ATMELIDIFC ATMELFWL + 1
+#define ATMELRD ATMELFWL + 2
+#define ATMELMAGIC 0x51807
#define REGDOMAINSZ 20
static const struct iw_priv_args atmel_private_args[] = {
-/*{ cmd, set_args, get_args, name } */
- { ATMELFWL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (atmel_priv_ioctl), IW_PRIV_TYPE_NONE, "atmelfwl" },
- { ATMELIDIFC, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "atmelidifc" },
- { ATMELRD, IW_PRIV_TYPE_CHAR | REGDOMAINSZ, IW_PRIV_TYPE_NONE, "regdomain" },
+ {
+ .cmd = ATMELFWL,
+ .set_args = IW_PRIV_TYPE_BYTE
+ | IW_PRIV_SIZE_FIXED
+ | sizeof (atmel_priv_ioctl),
+ .get_args = IW_PRIV_TYPE_NONE,
+ .name = "atmelfwl"
+ }, {
+ .cmd = ATMELIDIFC,
+ .set_args = IW_PRIV_TYPE_NONE,
+ .get_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "atmelidifc"
+ }, {
+ .cmd = ATMELRD,
+ .set_args = IW_PRIV_TYPE_CHAR | REGDOMAINSZ,
+ .get_args = IW_PRIV_TYPE_NONE,
+ .name = "regdomain"
+ },
};
-static const struct iw_handler_def atmel_handler_def =
+static const struct iw_handler_def atmel_handler_def =
{
.num_standard = sizeof(atmel_handler)/sizeof(iw_handler),
- .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler),
- .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args),
+ .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler),
+ .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args),
.standard = (iw_handler *) atmel_handler,
- .private = (iw_handler *) atmel_private_handler,
+ .private = (iw_handler *) atmel_private_handler,
.private_args = (struct iw_priv_args *) atmel_private_args,
.get_wireless_stats = atmel_get_wireless_stats
};
@@ -2419,13 +2436,13 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
atmel_priv_ioctl com;
struct iwreq *wrq = (struct iwreq *) rq;
unsigned char *new_firmware;
- char domain[REGDOMAINSZ+1];
+ char domain[REGDOMAINSZ + 1];
switch (cmd) {
case ATMELIDIFC:
- wrq->u.param.value = ATMELMAGIC;
+ wrq->u.param.value = ATMELMAGIC;
break;
-
+
case ATMELFWL:
if (copy_from_user(&com, rq->ifr_data, sizeof(com))) {
rc = -EFAULT;
@@ -2449,7 +2466,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
kfree(priv->firmware);
-
+
priv->firmware = new_firmware;
priv->firmware_length = com.len;
strncpy(priv->firmware_id, com.id, 31);
@@ -2461,7 +2478,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
rc = -EFAULT;
break;
}
-
+
if (!capable(CAP_NET_ADMIN)) {
rc = -EPERM;
break;
@@ -2484,15 +2501,15 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
rc = 0;
}
}
-
+
if (rc == 0 && priv->station_state != STATION_STATE_DOWN)
rc = atmel_open(dev);
break;
-
+
default:
rc = -EOPNOTSUPP;
}
-
+
return rc;
}
@@ -2503,17 +2520,17 @@ struct auth_body {
u8 el_id;
u8 chall_text_len;
u8 chall_text[253];
-};
+};
static void atmel_enter_state(struct atmel_private *priv, int new_state)
{
int old_state = priv->station_state;
-
+
if (new_state == old_state)
return;
-
+
priv->station_state = new_state;
-
+
if (new_state == STATION_STATE_READY) {
netif_start_queue(priv->dev);
netif_carrier_on(priv->dev);
@@ -2540,7 +2557,7 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid)
u8 options;
u8 SSID_size;
} cmd;
-
+
memset(cmd.BSSID, 0xff, 6);
if (priv->fast_scan) {
@@ -2554,17 +2571,17 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid)
cmd.min_channel_time = cpu_to_le16(10);
cmd.max_channel_time = cpu_to_le16(120);
}
-
+
cmd.options = 0;
-
+
if (!specific_ssid)
cmd.options |= SCAN_OPTIONS_SITE_SURVEY;
-
- cmd.channel = (priv->channel & 0x7f);
+
+ cmd.channel = (priv->channel & 0x7f);
cmd.scan_type = SCAN_TYPE_ACTIVE;
- cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ?
+ cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ?
BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE);
-
+
atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd));
/* This must come after all hardware access to avoid being messed up
@@ -2591,16 +2608,15 @@ static void join(struct atmel_private *priv, int type)
cmd.BSS_type = type;
cmd.timeout = cpu_to_le16(2000);
- atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd));
+ atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd));
}
-
static void start(struct atmel_private *priv, int type)
{
struct {
u8 BSSID[6];
u8 SSID[MAX_SSID_LENGTH];
- u8 BSS_type;
+ u8 BSS_type;
u8 channel;
u8 SSID_size;
u8 reserved[3];
@@ -2612,13 +2628,14 @@ static void start(struct atmel_private *priv, int type)
cmd.BSS_type = type;
cmd.channel = (priv->channel & 0x7f);
- atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd));
+ atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd));
}
-static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 channel)
+static void handle_beacon_probe(struct atmel_private *priv, u16 capability,
+ u8 channel)
{
int rejoin = 0;
- int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
SHORT_PREAMBLE : LONG_PREAMBLE;
if (priv->preamble != new) {
@@ -2626,48 +2643,48 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 c
rejoin = 1;
atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new);
}
-
+
if (priv->channel != channel) {
priv->channel = channel;
rejoin = 1;
atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel);
}
-
+
if (rejoin) {
priv->station_is_associated = 0;
atmel_enter_state(priv, STATION_STATE_JOINNING);
-
+
if (priv->operating_mode == IW_MODE_INFRA)
join(priv, BSS_TYPE_INFRASTRUCTURE);
- else
+ else
join(priv, BSS_TYPE_AD_HOC);
- }
+ }
}
-
-static void send_authentication_request(struct atmel_private *priv, u16 system, u8 *challenge, int challenge_len)
+static void send_authentication_request(struct atmel_private *priv, u16 system,
+ u8 *challenge, int challenge_len)
{
struct ieee80211_hdr_4addr header;
struct auth_body auth;
-
- header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
- header.duration_id = cpu_to_le16(0x8000);
+
+ header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
+ header.duration_id = cpu_to_le16(0x8000);
header.seq_ctl = 0;
memcpy(header.addr1, priv->CurrentBSSID, 6);
memcpy(header.addr2, priv->dev->dev_addr, 6);
memcpy(header.addr3, priv->CurrentBSSID, 6);
-
- if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1)
+
+ if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1)
/* no WEP for authentication frames with TrSeqNo 1 */
header.frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
-
- auth.alg = cpu_to_le16(system);
+
+ auth.alg = cpu_to_le16(system);
auth.status = 0;
auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum);
- priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1;
+ priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1;
priv->CurrentAuthentTransactionSeqNum += 2;
-
+
if (challenge_len != 0) {
auth.el_id = 16; /* challenge_text */
auth.chall_text_len = challenge_len;
@@ -2685,7 +2702,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
struct ieee80211_hdr_4addr header;
struct ass_req_format {
u16 capability;
- u16 listen_interval;
+ u16 listen_interval;
u8 ap[6]; /* nothing after here directly accessible */
u8 ssid_el_id;
u8 ssid_len;
@@ -2694,15 +2711,15 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
u8 sup_rates_len;
u8 rates[4];
} body;
-
- header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+
+ header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT |
(is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ));
header.duration_id = cpu_to_le16(0x8000);
header.seq_ctl = 0;
- memcpy(header.addr1, priv->CurrentBSSID, 6);
+ memcpy(header.addr1, priv->CurrentBSSID, 6);
memcpy(header.addr2, priv->dev->dev_addr, 6);
- memcpy(header.addr3, priv->CurrentBSSID, 6);
+ memcpy(header.addr3, priv->CurrentBSSID, 6);
body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS);
if (priv->wep_is_on)
@@ -2711,18 +2728,18 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble);
body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period);
-
+
/* current AP address - only in reassoc frame */
if (is_reassoc) {
- memcpy(body.ap, priv->CurrentBSSID, 6);
+ memcpy(body.ap, priv->CurrentBSSID, 6);
ssid_el_p = (u8 *)&body.ssid_el_id;
bodysize = 18 + priv->SSID_size;
} else {
ssid_el_p = (u8 *)&body.ap[0];
bodysize = 12 + priv->SSID_size;
}
-
- ssid_el_p[0]= C80211_MGMT_ElementID_SSID;
+
+ ssid_el_p[0] = C80211_MGMT_ElementID_SSID;
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates;
@@ -2732,7 +2749,8 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
}
-static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr_4addr *header)
+static int is_frame_from_current_bss(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header)
{
if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0;
@@ -2745,29 +2763,29 @@ static int retrieve_bss(struct atmel_private *priv)
int i;
int max_rssi = -128;
int max_index = -1;
-
+
if (priv->BSS_list_entries == 0)
return -1;
-
+
if (priv->connect_to_any_BSS) {
- /* Select a BSS with the max-RSSI but of the same type and of the same WEP mode
- and that it is not marked as 'bad' (i.e. we had previously failed to connect to
- this BSS with the settings that we currently use) */
+ /* Select a BSS with the max-RSSI but of the same type and of
+ the same WEP mode and that it is not marked as 'bad' (i.e.
+ we had previously failed to connect to this BSS with the
+ settings that we currently use) */
priv->current_BSS = 0;
- for(i=0; i<priv->BSS_list_entries; i++) {
+ for (i = 0; i < priv->BSS_list_entries; i++) {
if (priv->operating_mode == priv->BSSinfo[i].BSStype &&
- ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) ||
+ ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) ||
(priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) &&
!(priv->BSSinfo[i].channel & 0x80)) {
max_rssi = priv->BSSinfo[i].RSSI;
priv->current_BSS = max_index = i;
}
-
}
return max_index;
}
-
- for(i=0; i<priv->BSS_list_entries; i++) {
+
+ for (i = 0; i < priv->BSS_list_entries; i++) {
if (priv->SSID_size == priv->BSSinfo[i].SSIDsize &&
memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 &&
priv->operating_mode == priv->BSSinfo[i].BSStype &&
@@ -2781,19 +2799,19 @@ static int retrieve_bss(struct atmel_private *priv)
return max_index;
}
-
-static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
- u16 capability, u16 beacon_period, u8 channel, u8 rssi,
- u8 ssid_len, u8 *ssid, int is_beacon)
+static void store_bss_info(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header, u16 capability,
+ u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len,
+ u8 *ssid, int is_beacon)
{
u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3;
int i, index;
-
- for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
- if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0)
+
+ for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
+ if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0)
index = i;
- /* If we process a probe and an entry from this BSS exists
+ /* If we process a probe and an entry from this BSS exists
we will update the BSS entry with the info from this BSS.
If we process a beacon we will only update RSSI */
@@ -2820,8 +2838,8 @@ static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4add
priv->BSSinfo[index].BSStype = IW_MODE_ADHOC;
else if (capability & C80211_MGMT_CAPABILITY_ESS)
priv->BSSinfo[index].BSStype =IW_MODE_INFRA;
-
- priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+
+ priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
SHORT_PREAMBLE : LONG_PREAMBLE;
}
@@ -2831,8 +2849,8 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
u16 status = le16_to_cpu(auth->status);
u16 trans_seq_no = le16_to_cpu(auth->trans_seq);
u16 system = le16_to_cpu(auth->alg);
-
- if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) {
+
+ if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) {
/* no WEP */
if (priv->station_was_associated) {
atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
@@ -2842,20 +2860,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
send_association_request(priv, 0);
return;
- }
+ }
}
-
- if (status == C80211_MGMT_SC_Success && priv->wep_is_on) {
+
+ if (status == C80211_MGMT_SC_Success && priv->wep_is_on) {
/* WEP */
if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
return;
-
+
if (trans_seq_no == 0x0002 &&
auth->el_id == C80211_MGMT_ElementID_ChallengeText) {
send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
return;
}
-
+
if (trans_seq_no == 0x0004) {
if(priv->station_was_associated) {
atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
@@ -2865,10 +2883,10 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
send_association_request(priv, 0);
return;
- }
+ }
}
- }
-
+ }
+
if (status == C80211_MGMT_SC_AuthAlgNotSupported) {
/* Do opensystem first, then try sharedkey */
if (system == C80211_MGMT_AAN_OPENSYSTEM) {
@@ -2876,17 +2894,16 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0);
} else if (priv->connect_to_any_BSS) {
int bss_index;
-
+
priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
-
+
if ((bss_index = retrieve_bss(priv)) != -1) {
atmel_join_bss(priv, bss_index);
return;
}
}
}
-
-
+
priv->AuthenticationRequestRetryCnt = 0;
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
@@ -2902,38 +2919,44 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype)
u8 length;
u8 rates[4];
} *ass_resp = (struct ass_resp_format *)priv->rx_buf;
-
- u16 status = le16_to_cpu(ass_resp->status);
+
+ u16 status = le16_to_cpu(ass_resp->status);
u16 ass_id = le16_to_cpu(ass_resp->ass_id);
- u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length;
-
+ u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length;
+
if (frame_len < 8 + rates_len)
return;
-
+
if (status == C80211_MGMT_SC_Success) {
if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE)
priv->AssociationRequestRetryCnt = 0;
else
priv->ReAssociationRequestRetryCnt = 0;
-
- atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff);
- atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len);
+
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff);
+ atmel_set_mib(priv, Phy_Mib_Type,
+ PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len);
if (priv->power_mode == 0) {
priv->listen_interval = 1;
- atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
- atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
} else {
priv->listen_interval = 2;
- atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, PS_MODE);
- atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_PS_MODE_POS, PS_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2);
}
-
+
priv->station_is_associated = 1;
priv->station_was_associated = 1;
atmel_enter_state(priv, STATION_STATE_READY);
return;
}
-
+
if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE &&
status != C80211_MGMT_SC_AssDeniedBSSRate &&
status != C80211_MGMT_SC_SupportCapabilities &&
@@ -2943,7 +2966,7 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype)
send_association_request(priv, 0);
return;
}
-
+
if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE &&
status != C80211_MGMT_SC_AssDeniedBSSRate &&
status != C80211_MGMT_SC_SupportCapabilities &&
@@ -2953,17 +2976,16 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype)
send_association_request(priv, 1);
return;
}
-
+
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
-
- if(priv->connect_to_any_BSS) {
+
+ if (priv->connect_to_any_BSS) {
int bss_index;
priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
-
- if ((bss_index = retrieve_bss(priv)) != -1)
+
+ if ((bss_index = retrieve_bss(priv)) != -1)
atmel_join_bss(priv, bss_index);
-
}
}
@@ -2977,7 +2999,7 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index)
/* The WPA stuff cares about the current AP address */
if (priv->use_wpa)
build_wpa_mib(priv);
-
+
/* When switching to AdHoc turn OFF Power Save if needed */
if (bss->BSStype == IW_MODE_ADHOC &&
@@ -2985,25 +3007,28 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index)
priv->power_mode) {
priv->power_mode = 0;
priv->listen_interval = 1;
- atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
- atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type,
+ MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
}
-
+
priv->operating_mode = bss->BSStype;
- priv->channel = bss->channel & 0x7f;
+ priv->channel = bss->channel & 0x7f;
priv->beacon_period = bss->beacon_period;
-
+
if (priv->preamble != bss->preamble) {
priv->preamble = bss->preamble;
- atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, bss->preamble);
+ atmel_set_mib8(priv, Local_Mib_Type,
+ LOCAL_MIB_PREAMBLE_TYPE, bss->preamble);
}
-
+
if (!priv->wep_is_on && bss->UsingWEP) {
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
return;
}
-
+
if (priv->wep_is_on && !bss->UsingWEP) {
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
@@ -3011,30 +3036,28 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index)
}
atmel_enter_state(priv, STATION_STATE_JOINNING);
-
+
if (priv->operating_mode == IW_MODE_INFRA)
join(priv, BSS_TYPE_INFRASTRUCTURE);
- else
+ else
join(priv, BSS_TYPE_AD_HOC);
}
-
static void restart_search(struct atmel_private *priv)
{
int bss_index;
-
+
if (!priv->connect_to_any_BSS) {
atmel_scan(priv, 1);
} else {
priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
-
- if ((bss_index = retrieve_bss(priv)) != -1)
+
+ if ((bss_index = retrieve_bss(priv)) != -1)
atmel_join_bss(priv, bss_index);
else
atmel_scan(priv, 0);
-
- }
-}
+ }
+}
static void smooth_rssi(struct atmel_private *priv, u8 rssi)
{
@@ -3050,21 +3073,21 @@ static void smooth_rssi(struct atmel_private *priv, u8 rssi)
}
rssi = rssi * 100 / max_rssi;
- if((rssi + old) % 2)
- priv->wstats.qual.level = ((rssi + old)/2) + 1;
+ if ((rssi + old) % 2)
+ priv->wstats.qual.level = (rssi + old) / 2 + 1;
else
- priv->wstats.qual.level = ((rssi + old)/2);
+ priv->wstats.qual.level = (rssi + old) / 2;
priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID;
}
static void atmel_smooth_qual(struct atmel_private *priv)
{
- unsigned long time_diff = (jiffies - priv->last_qual)/HZ;
+ unsigned long time_diff = (jiffies - priv->last_qual) / HZ;
while (time_diff--) {
priv->last_qual += HZ;
- priv->wstats.qual.qual = priv->wstats.qual.qual/2;
- priv->wstats.qual.qual +=
+ priv->wstats.qual.qual = priv->wstats.qual.qual / 2;
+ priv->wstats.qual.qual +=
priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000;
priv->beacons_this_sec = 0;
}
@@ -3073,15 +3096,17 @@ static void atmel_smooth_qual(struct atmel_private *priv)
}
/* deals with incoming managment frames. */
-static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
- u16 frame_len, u8 rssi)
+static void atmel_management_frame(struct atmel_private *priv,
+ struct ieee80211_hdr_4addr *header,
+ u16 frame_len, u8 rssi)
{
u16 subtype;
-
- switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE) {
- case C80211_SUBTYPE_MGMT_BEACON :
+
+ subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE;
+ switch (subtype) {
+ case C80211_SUBTYPE_MGMT_BEACON:
case C80211_SUBTYPE_MGMT_ProbeResponse:
-
+
/* beacon frame has multiple variable-length fields -
never let an engineer loose with a data structure design. */
{
@@ -3099,7 +3124,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_
u8 ds_length;
/* ds here */
} *beacon = (struct beacon_format *)priv->rx_buf;
-
+
u8 channel, rates_length, ssid_length;
u64 timestamp = le64_to_cpu(beacon->timestamp);
u16 beacon_interval = le16_to_cpu(beacon->interval);
@@ -3107,7 +3132,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_
u8 *beaconp = priv->rx_buf;
ssid_length = beacon->ssid_length;
/* this blows chunks. */
- if (frame_len < 14 || frame_len < ssid_length + 15)
+ if (frame_len < 14 || frame_len < ssid_length + 15)
return;
rates_length = beaconp[beacon->ssid_length + 15];
if (frame_len < ssid_length + rates_length + 18)
@@ -3115,10 +3140,10 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_
if (ssid_length > MAX_SSID_LENGTH)
return;
channel = beaconp[ssid_length + rates_length + 18];
-
+
if (priv->station_state == STATION_STATE_READY) {
smooth_rssi(priv, rssi);
- if (is_frame_from_current_bss(priv, header)) {
+ if (is_frame_from_current_bss(priv, header)) {
priv->beacons_this_sec++;
atmel_smooth_qual(priv);
if (priv->last_beacon_timestamp) {
@@ -3132,41 +3157,43 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_
handle_beacon_probe(priv, capability, channel);
}
}
-
- if (priv->station_state == STATION_STATE_SCANNING )
- store_bss_info(priv, header, capability, beacon_interval, channel,
- rssi, ssid_length, &beacon->rates_el_id,
- subtype == C80211_SUBTYPE_MGMT_BEACON) ;
+
+ if (priv->station_state == STATION_STATE_SCANNING)
+ store_bss_info(priv, header, capability,
+ beacon_interval, channel, rssi,
+ ssid_length,
+ &beacon->rates_el_id,
+ subtype == C80211_SUBTYPE_MGMT_BEACON);
}
break;
-
+
case C80211_SUBTYPE_MGMT_Authentication:
if (priv->station_state == STATION_STATE_AUTHENTICATING)
authenticate(priv, frame_len);
-
+
break;
-
+
case C80211_SUBTYPE_MGMT_ASS_RESPONSE:
case C80211_SUBTYPE_MGMT_REASS_RESPONSE:
-
- if (priv->station_state == STATION_STATE_ASSOCIATING ||
+
+ if (priv->station_state == STATION_STATE_ASSOCIATING ||
priv->station_state == STATION_STATE_REASSOCIATING)
associate(priv, frame_len, subtype);
-
+
break;
case C80211_SUBTYPE_MGMT_DISASSOSIATION:
- if (priv->station_is_associated &&
- priv->operating_mode == IW_MODE_INFRA &&
+ if (priv->station_is_associated &&
+ priv->operating_mode == IW_MODE_INFRA &&
is_frame_from_current_bss(priv, header)) {
priv->station_was_associated = 0;
priv->station_is_associated = 0;
-
+
atmel_enter_state(priv, STATION_STATE_JOINNING);
join(priv, BSS_TYPE_INFRASTRUCTURE);
}
-
+
break;
case C80211_SUBTYPE_MGMT_Deauthentication:
@@ -3177,7 +3204,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_
atmel_enter_state(priv, STATION_STATE_JOINNING);
join(priv, BSS_TYPE_INFRASTRUCTURE);
}
-
+
break;
}
}
@@ -3185,76 +3212,73 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_
/* run when timer expires */
static void atmel_management_timer(u_long a)
{
- struct net_device *dev = (struct net_device *) a;
- struct atmel_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- /* Check if the card has been yanked. */
- if (priv->card && priv->present_callback &&
- !(*priv->present_callback)(priv->card))
- return;
-
- spin_lock_irqsave(&priv->irqlock, flags);
-
- switch (priv->station_state) {
-
- case STATION_STATE_AUTHENTICATING:
- if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) {
- atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
- priv->station_is_associated = 0;
- priv->AuthenticationRequestRetryCnt = 0;
- restart_search(priv);
- } else {
- priv->AuthenticationRequestRetryCnt++;
- priv->CurrentAuthentTransactionSeqNum = 0x0001;
- mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
- send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0);
- }
-
- break;
+ struct net_device *dev = (struct net_device *) a;
+ struct atmel_private *priv = netdev_priv(dev);
+ unsigned long flags;
- case STATION_STATE_ASSOCIATING:
- if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
- atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
- priv->station_is_associated = 0;
- priv->AssociationRequestRetryCnt = 0;
- restart_search(priv);
- } else {
- priv->AssociationRequestRetryCnt++;
- mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
- send_association_request(priv, 0);
- }
+ /* Check if the card has been yanked. */
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card))
+ return;
- break;
-
- case STATION_STATE_REASSOCIATING:
- if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
- atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
- priv->station_is_associated = 0;
- priv->ReAssociationRequestRetryCnt = 0;
- restart_search(priv);
- } else {
- priv->ReAssociationRequestRetryCnt++;
- mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
- send_association_request(priv, 1);
- }
+ spin_lock_irqsave(&priv->irqlock, flags);
+
+ switch (priv->station_state) {
+ case STATION_STATE_AUTHENTICATING:
+ if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->AuthenticationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->AuthenticationRequestRetryCnt++;
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0);
+ }
break;
-
- default:
+
+ case STATION_STATE_ASSOCIATING:
+ if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->AssociationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->AssociationRequestRetryCnt++;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_association_request(priv, 0);
+ }
break;
- }
-
- spin_unlock_irqrestore(&priv->irqlock, flags);
+
+ case STATION_STATE_REASSOCIATING:
+ if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->ReAssociationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->ReAssociationRequestRetryCnt++;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_association_request(priv, 1);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ spin_unlock_irqrestore(&priv->irqlock, flags);
}
-
+
static void atmel_command_irq(struct atmel_private *priv)
{
u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET));
int fast_scan;
-
- if (status == CMD_STATUS_IDLE ||
+
+ if (status == CMD_STATUS_IDLE ||
status == CMD_STATUS_IN_PROGRESS)
return;
@@ -3266,20 +3290,20 @@ static void atmel_command_irq(struct atmel_private *priv)
atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
(u8 *)priv->CurrentBSSID, 6);
atmel_enter_state(priv, STATION_STATE_READY);
- }
+ }
break;
-
+
case CMD_Scan:
fast_scan = priv->fast_scan;
priv->fast_scan = 0;
-
+
if (status != CMD_STATUS_COMPLETE) {
atmel_scan(priv, 1);
} else {
int bss_index = retrieve_bss(priv);
if (bss_index != -1) {
atmel_join_bss(priv, bss_index);
- } else if (priv->operating_mode == IW_MODE_ADHOC &&
+ } else if (priv->operating_mode == IW_MODE_ADHOC &&
priv->SSID_size != 0) {
start(priv, BSS_TYPE_AD_HOC);
} else {
@@ -3289,16 +3313,16 @@ static void atmel_command_irq(struct atmel_private *priv)
priv->site_survey_state = SITE_SURVEY_COMPLETED;
}
break;
-
+
case CMD_SiteSurvey:
priv->fast_scan = 0;
-
+
if (status != CMD_STATUS_COMPLETE)
return;
-
+
priv->site_survey_state = SITE_SURVEY_COMPLETED;
if (priv->station_is_associated) {
- atmel_enter_state(priv, STATION_STATE_READY);
+ atmel_enter_state(priv, STATION_STATE_READY);
} else {
atmel_scan(priv, 1);
}
@@ -3312,16 +3336,15 @@ static void atmel_command_irq(struct atmel_private *priv)
} else {
priv->AuthenticationRequestRetryCnt = 0;
atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
-
+
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->CurrentAuthentTransactionSeqNum = 0x0001;
send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0);
}
return;
}
-
+
atmel_scan(priv, 1);
-
}
}
@@ -3333,20 +3356,20 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
if (priv->card_type == CARD_TYPE_SPI_FLASH)
atmel_set_gcr(priv->dev, GCR_REMAP);
-
+
/* wake up on-board processor */
atmel_clear_gcr(priv->dev, 0x0040);
atmel_write16(priv->dev, BSR, BSS_SRAM);
-
+
if (priv->card_type == CARD_TYPE_SPI_FLASH)
mdelay(100);
/* and wait for it */
- for (i = LOOP_RETRY_LIMIT; i; i--) {
+ for (i = LOOP_RETRY_LIMIT; i; i--) {
mr1 = atmel_read16(priv->dev, MR1);
mr3 = atmel_read16(priv->dev, MR3);
-
- if (mr3 & MAC_BOOT_COMPLETE)
+
+ if (mr3 & MAC_BOOT_COMPLETE)
break;
if (mr1 & MAC_BOOT_COMPLETE &&
priv->bus_type == BUS_TYPE_PCCARD)
@@ -3357,35 +3380,36 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
return 0;
}
-
+
if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
return 0;
}
-
- /* now check for completion of MAC initialization through
- the FunCtrl field of the IFACE, poll MR1 to detect completion of
- MAC initialization, check completion status, set interrupt mask,
- enables interrupts and calls Tx and Rx initialization functions */
-
+
+ /* now check for completion of MAC initialization through
+ the FunCtrl field of the IFACE, poll MR1 to detect completion of
+ MAC initialization, check completion status, set interrupt mask,
+ enables interrupts and calls Tx and Rx initialization functions */
+
atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE);
-
- for (i = LOOP_RETRY_LIMIT; i; i--) {
+
+ for (i = LOOP_RETRY_LIMIT; i; i--) {
mr1 = atmel_read16(priv->dev, MR1);
mr3 = atmel_read16(priv->dev, MR3);
-
- if (mr3 & MAC_INIT_COMPLETE)
+
+ if (mr3 & MAC_INIT_COMPLETE)
break;
if (mr1 & MAC_INIT_COMPLETE &&
priv->bus_type == BUS_TYPE_PCCARD)
break;
}
-
+
if (i == 0) {
- printk(KERN_ALERT "%s: MAC failed to initialise.\n", priv->dev->name);
+ printk(KERN_ALERT "%s: MAC failed to initialise.\n",
+ priv->dev->name);
return 0;
}
-
+
/* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
if ((mr3 & MAC_INIT_COMPLETE) &&
!(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
@@ -3398,9 +3422,9 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
return 0;
}
- atmel_copy_to_host(priv->dev, (unsigned char *)iface,
+ atmel_copy_to_host(priv->dev, (unsigned char *)iface,
priv->host_info_base, sizeof(*iface));
-
+
iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos);
iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size);
iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos);
@@ -3424,16 +3448,16 @@ static int probe_atmel_card(struct net_device *dev)
{
int rc = 0;
struct atmel_private *priv = netdev_priv(dev);
-
+
/* reset pccard */
- if (priv->bus_type == BUS_TYPE_PCCARD)
+ if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
-
+
atmel_write16(dev, GCR, 0x0040);
mdelay(500);
-
+
if (atmel_read16(dev, MR2) == 0) {
- /* No stored firmware so load a small stub which just
+ /* No stored firmware so load a small stub which just
tells us the MAC address */
int i;
priv->card_type = CARD_TYPE_EEPROM;
@@ -3442,7 +3466,7 @@ static int probe_atmel_card(struct net_device *dev)
atmel_set_gcr(dev, GCR_REMAP);
atmel_clear_gcr(priv->dev, 0x0040);
atmel_write16(dev, BSR, BSS_SRAM);
- for (i = LOOP_RETRY_LIMIT; i; i--)
+ for (i = LOOP_RETRY_LIMIT; i; i--)
if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE)
break;
if (i == 0) {
@@ -3451,7 +3475,7 @@ static int probe_atmel_card(struct net_device *dev)
atmel_copy_to_host(dev, dev->dev_addr, atmel_read16(dev, MR2), 6);
/* got address, now squash it again until the network
interface is opened */
- if (priv->bus_type == BUS_TYPE_PCCARD)
+ if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
atmel_write16(dev, GCR, 0x0040);
rc = 1;
@@ -3459,7 +3483,7 @@ static int probe_atmel_card(struct net_device *dev)
} else if (atmel_read16(dev, MR4) == 0) {
/* Mac address easy in this case. */
priv->card_type = CARD_TYPE_PARALLEL_FLASH;
- atmel_write16(dev, BSR, 1);
+ atmel_write16(dev, BSR, 1);
atmel_copy_to_host(dev, dev->dev_addr, 0xc000, 6);
atmel_write16(dev, BSR, 0x200);
rc = 1;
@@ -3469,16 +3493,16 @@ static int probe_atmel_card(struct net_device *dev)
priv->card_type = CARD_TYPE_SPI_FLASH;
if (atmel_wakeup_firmware(priv)) {
atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
-
+
/* got address, now squash it again until the network
interface is opened */
- if (priv->bus_type == BUS_TYPE_PCCARD)
+ if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
atmel_write16(dev, GCR, 0x0040);
rc = 1;
}
}
-
+
if (rc) {
if (dev->dev_addr[0] == 0xFF) {
u8 default_mac[] = {0x00,0x04, 0x25, 0x00, 0x00, 0x00};
@@ -3486,27 +3510,27 @@ static int probe_atmel_card(struct net_device *dev)
memcpy(dev->dev_addr, default_mac, 6);
}
}
-
+
return rc;
}
-static void build_wep_mib(struct atmel_private *priv)
/* Move the encyption information on the MIB structure.
This routine is for the pre-WPA firmware: later firmware has
a different format MIB and a different routine. */
+static void build_wep_mib(struct atmel_private *priv)
{
struct { /* NB this is matched to the hardware, don't change. */
- u8 wep_is_on;
+ u8 wep_is_on;
u8 default_key; /* 0..3 */
u8 reserved;
u8 exclude_unencrypted;
-
+
u32 WEPICV_error_count;
u32 WEP_excluded_count;
-
+
u8 wep_keys[MAX_ENCRYPTION_KEYS][13];
- u8 encryption_level; /* 0, 1, 2 */
- u8 reserved2[3];
+ u8 encryption_level; /* 0, 1, 2 */
+ u8 reserved2[3];
} mib;
int i;
@@ -3515,54 +3539,55 @@ static void build_wep_mib(struct atmel_private *priv)
if (priv->wep_key_len[priv->default_key] > 5)
mib.encryption_level = 2;
else
- mib.encryption_level = 1;
+ mib.encryption_level = 1;
} else {
mib.encryption_level = 0;
}
mib.default_key = priv->default_key;
mib.exclude_unencrypted = priv->exclude_unencrypted;
-
- for(i = 0; i < MAX_ENCRYPTION_KEYS; i++)
+
+ for (i = 0; i < MAX_ENCRYPTION_KEYS; i++)
memcpy(mib.wep_keys[i], priv->wep_keys[i], 13);
-
+
atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
}
static void build_wpa_mib(struct atmel_private *priv)
{
- /* This is for the later (WPA enabled) firmware. */
+ /* This is for the later (WPA enabled) firmware. */
struct { /* NB this is matched to the hardware, don't change. */
u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
u8 receiver_address[6];
- u8 wep_is_on;
+ u8 wep_is_on;
u8 default_key; /* 0..3 */
u8 group_key;
u8 exclude_unencrypted;
u8 encryption_type;
u8 reserved;
-
+
u32 WEPICV_error_count;
u32 WEP_excluded_count;
-
+
u8 key_RSC[4][8];
} mib;
-
+
int i;
mib.wep_is_on = priv->wep_is_on;
mib.exclude_unencrypted = priv->exclude_unencrypted;
memcpy(mib.receiver_address, priv->CurrentBSSID, 6);
-
+
/* zero all the keys before adding in valid ones. */
memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value));
-
+
if (priv->wep_is_on) {
- /* There's a comment in the Atmel code to the effect that this is only valid
- when still using WEP, it may need to be set to something to use WPA */
+ /* There's a comment in the Atmel code to the effect that this
+ is only valid when still using WEP, it may need to be set to
+ something to use WPA */
memset(mib.key_RSC, 0, sizeof(mib.key_RSC));
-
+
mib.default_key = mib.group_key = 255;
for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) {
if (priv->wep_key_len[i] > 0) {
@@ -3570,12 +3595,12 @@ static void build_wpa_mib(struct atmel_private *priv)
if (i == priv->default_key) {
mib.default_key = i;
mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7;
- mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite;
} else {
mib.group_key = i;
priv->group_cipher_suite = priv->pairwise_cipher_suite;
mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1;
- mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite;
}
}
}
@@ -3583,47 +3608,47 @@ static void build_wpa_mib(struct atmel_private *priv)
mib.default_key = mib.group_key != 255 ? mib.group_key : 0;
if (mib.group_key == 255)
mib.group_key = mib.default_key;
-
+
}
-
+
atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
}
-
-static int reset_atmel_card(struct net_device *dev)
+
+static int reset_atmel_card(struct net_device *dev)
{
/* do everything necessary to wake up the hardware, including
waiting for the lightning strike and throwing the knife switch....
- set all the Mib values which matter in the card to match
+ set all the Mib values which matter in the card to match
their settings in the atmel_private structure. Some of these
can be altered on the fly, but many (WEP, infrastucture or ad-hoc)
can only be changed by tearing down the world and coming back through
here.
- This routine is also responsible for initialising some
- hardware-specific fields in the atmel_private structure,
+ This routine is also responsible for initialising some
+ hardware-specific fields in the atmel_private structure,
including a copy of the firmware's hostinfo stucture
which is the route into the rest of the firmare datastructures. */
struct atmel_private *priv = netdev_priv(dev);
u8 configuration;
-
+
/* data to add to the firmware names, in priority order
this implemenents firmware versioning */
-
+
static char *firmware_modifier[] = {
"-wpa",
"",
NULL
};
-
+
/* reset pccard */
- if (priv->bus_type == BUS_TYPE_PCCARD)
+ if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(priv->dev, GCR, 0x0060);
-
+
/* stop card , disable interrupts */
atmel_write16(priv->dev, GCR, 0x0040);
-
+
if (priv->card_type == CARD_TYPE_EEPROM) {
/* copy in firmware if needed */
const struct firmware *fw_entry = NULL;
@@ -3636,13 +3661,13 @@ static int reset_atmel_card(struct net_device *dev)
"%s: card type is unknown: assuming at76c502 firmware is OK.\n",
dev->name);
printk(KERN_INFO
- "%s: if not, use the firmware= module parameter.\n",
+ "%s: if not, use the firmware= module parameter.\n",
dev->name);
strcpy(priv->firmware_id, "atmel_at76c502.bin");
}
if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
- printk(KERN_ALERT
- "%s: firmware %s is missing, cannot continue.\n",
+ printk(KERN_ALERT
+ "%s: firmware %s is missing, cannot continue.\n",
dev->name, priv->firmware_id);
return 0;
}
@@ -3654,7 +3679,7 @@ static int reset_atmel_card(struct net_device *dev)
while (fw_table[fw_index].fw_type != priv->firmware_type
&& fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE)
fw_index++;
-
+
/* construct the actual firmware file name */
if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) {
int i;
@@ -3669,24 +3694,24 @@ static int reset_atmel_card(struct net_device *dev)
}
}
if (!success) {
- printk(KERN_ALERT
- "%s: firmware %s is missing, cannot start.\n",
+ printk(KERN_ALERT
+ "%s: firmware %s is missing, cannot start.\n",
dev->name, priv->firmware_id);
priv->firmware_id[0] = '\0';
- return 0;
+ return 0;
}
}
-
+
fw = fw_entry->data;
len = fw_entry->size;
}
-
+
if (len <= 0x6000) {
atmel_write16(priv->dev, BSR, BSS_IRAM);
atmel_copy_to_card(priv->dev, 0, fw, len);
atmel_set_gcr(priv->dev, GCR_REMAP);
} else {
- /* Remap */
+ /* Remap */
atmel_set_gcr(priv->dev, GCR_REMAP);
atmel_write16(priv->dev, BSR, BSS_IRAM);
atmel_copy_to_card(priv->dev, 0, fw, 0x6000);
@@ -3708,45 +3733,45 @@ static int reset_atmel_card(struct net_device *dev)
the 3com broken-ness filter. */
priv->use_wpa = (priv->host_info.major_version == 4);
priv->radio_on_broken = (priv->host_info.major_version == 5);
-
+
/* unmask all irq sources */
atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff);
-
+
/* int Tx system and enable Tx */
atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0);
atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L);
atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0);
atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0);
- priv->tx_desc_free = priv->host_info.tx_desc_count;
- priv->tx_desc_head = 0;
- priv->tx_desc_tail = 0;
+ priv->tx_desc_free = priv->host_info.tx_desc_count;
+ priv->tx_desc_head = 0;
+ priv->tx_desc_tail = 0;
priv->tx_desc_previous = 0;
priv->tx_free_mem = priv->host_info.tx_buff_size;
- priv->tx_buff_head = 0;
- priv->tx_buff_tail = 0;
-
- configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
- atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+ priv->tx_buff_head = 0;
+ priv->tx_buff_tail = 0;
+
+ configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
configuration | FUNC_CTRL_TxENABLE);
/* init Rx system and enable */
priv->rx_desc_head = 0;
-
- configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
- atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+
+ configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
configuration | FUNC_CTRL_RxENABLE);
-
+
if (!priv->radio_on_broken) {
- if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
+ if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
CMD_STATUS_REJECTED_RADIO_OFF) {
- printk(KERN_INFO
+ printk(KERN_INFO
"%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
dev->name);
return 0;
}
}
-
+
/* set up enough MIB values to run. */
atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate);
atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_TX_PROMISCUOUS_POS, PROM_MODE_OFF);
@@ -3755,7 +3780,7 @@ static int reset_atmel_card(struct net_device *dev)
atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry);
atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry);
atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble);
- atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS,
+ atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS,
priv->dev->dev_addr, 6);
atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
@@ -3766,42 +3791,44 @@ static int reset_atmel_card(struct net_device *dev)
build_wpa_mib(priv);
else
build_wep_mib(priv);
-
+
return 1;
}
-static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size)
+static void atmel_send_command(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size)
{
if (cmd)
- atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET),
+ atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET),
cmd, cmd_size);
-
+
atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command);
atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0);
}
-
-static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size)
+
+static int atmel_send_command_wait(struct atmel_private *priv, int command,
+ void *cmd, int cmd_size)
{
int i, status;
-
+
atmel_send_command(priv, command, cmd, cmd_size);
-
+
for (i = 5000; i; i--) {
status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
- if (status != CMD_STATUS_IDLE &&
+ if (status != CMD_STATUS_IDLE &&
status != CMD_STATUS_IN_PROGRESS)
break;
udelay(20);
}
-
+
if (i == 0) {
printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name);
status = CMD_STATUS_HOST_ERROR;
- } else {
+ } else {
if (command != CMD_EnableRadio)
status = CMD_STATUS_COMPLETE;
}
-
+
return status;
}
@@ -3827,7 +3854,8 @@ static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 dat
atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
}
-static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data)
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index,
+ u16 data)
{
struct get_set_mib m;
m.type = type;
@@ -3839,7 +3867,8 @@ static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 d
atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2);
}
-static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len)
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index,
+ u8 *data, int data_len)
{
struct get_set_mib m;
m.type = type;
@@ -3848,23 +3877,24 @@ static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *dat
if (data_len > MIB_MAX_DATA_BYTES)
printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
-
+
memcpy(m.data, data, data_len);
atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
}
-static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len)
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index,
+ u8 *data, int data_len)
{
struct get_set_mib m;
m.type = type;
m.size = data_len;
m.index = index;
-
+
if (data_len > MIB_MAX_DATA_BYTES)
printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
-
+
atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
- atmel_copy_to_host(priv->dev, data,
+ atmel_copy_to_host(priv->dev, data,
atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len);
}
@@ -3873,11 +3903,12 @@ static void atmel_writeAR(struct net_device *dev, u16 data)
int i;
outw(data, dev->base_addr + AR);
/* Address register appears to need some convincing..... */
- for (i = 0; data != inw(dev->base_addr + AR) && i<10; i++)
+ for (i = 0; data != inw(dev->base_addr + AR) && i < 10; i++)
outw(data, dev->base_addr + AR);
}
-static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len)
+static void atmel_copy_to_card(struct net_device *dev, u16 dest,
+ unsigned char *src, u16 len)
{
int i;
atmel_writeAR(dev, dest);
@@ -3894,7 +3925,8 @@ static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *
atmel_write8(dev, DR, *src);
}
-static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len)
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest,
+ u16 src, u16 len)
{
int i;
atmel_writeAR(dev, src);
@@ -3930,22 +3962,24 @@ static int atmel_lock_mac(struct atmel_private *priv)
break;
udelay(20);
}
-
- if (!i) return 0; /* timed out */
-
+
+ if (!i)
+ return 0; /* timed out */
+
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1);
if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) {
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
- if (!j--) return 0; /* timed out */
+ if (!j--)
+ return 0; /* timed out */
goto retry;
}
-
+
return 1;
}
static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data)
{
- atmel_writeAR(priv->dev, pos);
+ atmel_writeAR(priv->dev, pos);
atmel_write16(priv->dev, DR, data); /* card is little-endian */
atmel_write16(priv->dev, DR, data >> 16);
}
@@ -4017,9 +4051,9 @@ static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data)
serial output, since SO is normally high. But it
does cause 8 clock cycles and thus 8 bits to be
clocked in to the chip. See Atmel's SPI
- controller (e.g. AT91M55800) timing and 4K
+ controller (e.g. AT91M55800) timing and 4K
SPI EEPROM manuals */
-
+
.set NVRAM_SCRATCH, 0x02000100 /* arbitrary area for scratchpad memory */
.set NVRAM_IMAGE, 0x02000200
.set NVRAM_LENGTH, 0x0200
@@ -4032,24 +4066,24 @@ static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data)
.set MR4, 0xC
RESET_VECTOR:
b RESET_HANDLER
-UNDEF_VECTOR:
+UNDEF_VECTOR:
b HALT1
-SWI_VECTOR:
+SWI_VECTOR:
b HALT1
-IABORT_VECTOR:
+IABORT_VECTOR:
b HALT1
-DABORT_VECTOR:
-RESERVED_VECTOR:
+DABORT_VECTOR:
+RESERVED_VECTOR:
b HALT1
-IRQ_VECTOR:
+IRQ_VECTOR:
b HALT1
-FIQ_VECTOR:
+FIQ_VECTOR:
b HALT1
HALT1: b HALT1
RESET_HANDLER:
mov r0, #CPSR_INITIAL
msr CPSR_c, r0 /* This is probably unnecessary */
-
+
/* I'm guessing this is initializing clock generator electronics for SPI */
ldr r0, =SPI_CGEN_BASE
mov r1, #0
@@ -4061,7 +4095,7 @@ RESET_HANDLER:
str r1, [r0, #28]
mov r1, #1
str r1, [r0, #8]
-
+
ldr r0, =MRBASE
mov r1, #0
strh r1, [r0, #MR1]
@@ -4094,7 +4128,7 @@ GET_WHOLE_NVRAM:
ldmia sp!, {lr}
bx lr
.endfunc
-
+
.func Get_MAC_Addr, GET_MAC_ADDR
GET_MAC_ADDR:
stmdb sp!, {lr}
@@ -4110,13 +4144,13 @@ GET_MAC_ADDR:
.func Delay9, DELAY9
DELAY9:
adds r0, r0, r0, LSL #3 /* r0 = r0 * 9 */
-DELAYLOOP:
+DELAYLOOP:
beq DELAY9_done
subs r0, r0, #1
b DELAYLOOP
-DELAY9_done:
+DELAY9_done:
bx lr
-.endfunc
+.endfunc
.func SP_Init, SP_INIT
SP_INIT:
@@ -4145,26 +4179,26 @@ SP_INIT:
ldr r0, [r0, #SP_RDR]
bx lr
.endfunc
-.func NVRAM_Init, NVRAM_INIT
+.func NVRAM_Init, NVRAM_INIT
NVRAM_INIT:
ldr r1, =SP_BASE
ldr r0, [r1, #SP_RDR]
mov r0, #NVRAM_CMD_RDSR
str r0, [r1, #SP_TDR]
-SP_loop1:
+SP_loop1:
ldr r0, [r1, #SP_SR]
tst r0, #SP_TDRE
beq SP_loop1
mov r0, #SPI_8CLOCKS
- str r0, [r1, #SP_TDR]
-SP_loop2:
+ str r0, [r1, #SP_TDR]
+SP_loop2:
ldr r0, [r1, #SP_SR]
tst r0, #SP_TDRE
beq SP_loop2
ldr r0, [r1, #SP_RDR]
-SP_loop3:
+SP_loop3:
ldr r0, [r1, #SP_SR]
tst r0, #SP_RDRF
beq SP_loop3
@@ -4173,7 +4207,7 @@ SP_loop3:
and r0, r0, #255
bx lr
.endfunc
-
+
.func NVRAM_Xfer, NVRAM_XFER
/* r0 = dest address */
/* r1 = not used */
@@ -4185,11 +4219,11 @@ NVRAM_XFER:
mov r4, r3 /* save r3 (length) */
mov r0, r2, LSR #5 /* SPI memories put A8 in the command field */
and r0, r0, #8
- add r0, r0, #NVRAM_CMD_READ
+ add r0, r0, #NVRAM_CMD_READ
ldr r1, =NVRAM_SCRATCH
strb r0, [r1, #0] /* save command in NVRAM_SCRATCH[0] */
strb r2, [r1, #1] /* save low byte of source address in NVRAM_SCRATCH[1] */
-_local1:
+_local1:
bl NVRAM_INIT
tst r0, #NVRAM_SR_RDY
bne _local1
@@ -4211,7 +4245,7 @@ NVRAM_XFER2:
cmp r0, #0
bls _local2
ldr r5, =NVRAM_SCRATCH
-_local4:
+_local4:
ldrb r6, [r5, r3]
str r6, [r4, #SP_TDR]
_local3:
@@ -4225,7 +4259,7 @@ _local2:
mov r3, #SPI_8CLOCKS
str r3, [r4, #SP_TDR]
ldr r0, [r4, #SP_RDR]
-_local5:
+_local5:
ldr r0, [r4, #SP_SR]
tst r0, #SP_RDRF
beq _local5
@@ -4233,12 +4267,12 @@ _local5:
mov r0, #0
cmp r2, #0 /* r2 is # of bytes to copy in */
bls _local6
-_local7:
+_local7:
ldr r5, [r4, #SP_SR]
tst r5, #SP_TDRE
beq _local7
str r3, [r4, #SP_TDR] /* r3 has SPI_8CLOCKS */
-_local8:
+_local8:
ldr r5, [r4, #SP_SR]
tst r5, #SP_RDRF
beq _local8
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 17d1fd90f83..d6f4a5a3e55 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -93,8 +93,6 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
static void atmel_config(dev_link_t *link);
static void atmel_release(dev_link_t *link);
-static int atmel_event(event_t event, int priority,
- event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
@@ -102,8 +100,7 @@ static int atmel_event(event_t event, int priority,
needed to manage one actual PCMCIA card.
*/
-static dev_link_t *atmel_attach(void);
-static void atmel_detach(dev_link_t *);
+static void atmel_detach(struct pcmcia_device *p_dev);
/*
You'll also need to prototype all the functions that will actually
@@ -113,14 +110,6 @@ static void atmel_detach(dev_link_t *);
*/
/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static dev_info_t dev_info = "atmel_cs";
-
-/*
A linked list of "instances" of the atmelnet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -130,15 +119,7 @@ static dev_info_t dev_info = "atmel_cs";
device numbers are used to derive the corresponding array index.
*/
-static dev_link_t *dev_list = NULL;
-
/*
- A dev_link_t structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a dev_link_t structure can be used to point to
- a device-specific private data structure, like this.
-
A driver needs to provide a dev_node_t structure for each device
on a card. In some cases, there is only one device per card (for
example, ethernet cards, modems). In other cases, there may be
@@ -171,27 +152,25 @@ typedef struct local_info_t {
======================================================================*/
-static dev_link_t *atmel_attach(void)
+static int atmel_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
- int ret;
-
+
DEBUG(0, "atmel_attach()\n");
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
- return NULL;
+ return -ENOMEM;
}
-
+
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
-
+
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -202,30 +181,23 @@ static dev_link_t *atmel_attach(void)
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
-
+
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
kfree (link);
- return NULL;
+ return -ENOMEM;
}
link->priv = local;
-
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- atmel_detach(link);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ atmel_config(link);
+
+ return 0;
} /* atmel_attach */
/*======================================================================
@@ -237,27 +209,15 @@ static dev_link_t *atmel_attach(void)
======================================================================*/
-static void atmel_detach(dev_link_t *link)
+static void atmel_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
-
+ dev_link_t *link = dev_to_instance(p_dev);
+
DEBUG(0, "atmel_detach(0x%p)\n", link);
-
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
if (link->state & DEV_CONFIG)
atmel_release(link);
-
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
- /* Unlink device structure, free pieces */
- *linkp = link->next;
kfree(link->priv);
kfree(link);
}
@@ -477,60 +437,34 @@ static void atmel_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
+static int atmel_suspend(struct pcmcia_device *dev)
+{
+ dev_link_t *link = dev_to_instance(dev);
+ local_info_t *local = link->priv;
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
- ======================================================================*/
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(local->eth_dev);
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
-static int atmel_event(event_t event, int priority,
- event_callback_args_t *args)
+static int atmel_resume(struct pcmcia_device *dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(dev);
local_info_t *local = link->priv;
-
- DEBUG(1, "atmel_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- netif_device_detach(local->eth_dev);
- atmel_release(link);
- }
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- atmel_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- netif_device_detach(local->eth_dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- atmel_open(local->eth_dev);
- netif_device_attach(local->eth_dev);
- }
- break;
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ atmel_open(local->eth_dev);
+ netif_device_attach(local->eth_dev);
}
+
return 0;
-} /* atmel_event */
+}
/*====================================================================*/
/* We use the driver_info field to store the correct firmware type for a card. */
@@ -581,10 +515,11 @@ static struct pcmcia_driver atmel_driver = {
.drv = {
.name = "atmel_cs",
},
- .attach = atmel_attach,
- .event = atmel_event,
- .detach = atmel_detach,
+ .probe = atmel_attach,
+ .remove = atmel_detach,
.id_table = atmel_ids,
+ .suspend = atmel_suspend,
+ .resume = atmel_resume,
};
static int atmel_cs_init(void)
@@ -595,7 +530,6 @@ static int atmel_cs_init(void)
static void atmel_cs_cleanup(void)
{
pcmcia_unregister_driver(&atmel_driver);
- BUG_ON(dev_list != NULL);
}
/*
diff --git a/drivers/net/wireless/hostap/Makefile b/drivers/net/wireless/hostap/Makefile
index fc62235bfc2..353ccb93134 100644
--- a/drivers/net/wireless/hostap/Makefile
+++ b/drivers/net/wireless/hostap/Makefile
@@ -1,3 +1,4 @@
+hostap-y := hostap_main.o
obj-$(CONFIG_HOSTAP) += hostap.o
obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 2643976a667..8bc0b528548 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -25,7 +25,6 @@
static char *version = PRISM2_VERSION " (Jouni Malinen <jkmaline@cc.hut.fi>)";
static dev_info_t dev_info = "hostap_cs";
-static dev_link_t *dev_list = NULL;
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
@@ -203,10 +202,9 @@ static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
-static void prism2_detach(dev_link_t *link);
+static void prism2_detach(struct pcmcia_device *p_dev);
static void prism2_release(u_long arg);
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args);
+static int prism2_config(dev_link_t *link);
static int prism2_pccard_card_present(local_info_t *local)
@@ -503,15 +501,13 @@ static struct prism2_helper_functions prism2_pccard_funcs =
/* allocate local data and register with CardServices
* initialize dev_link structure, but do not configure the card yet */
-static dev_link_t *prism2_attach(void)
+static int prism2_attach(struct pcmcia_device *p_dev)
{
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
if (link == NULL)
- return NULL;
+ return -ENOMEM;
memset(link, 0, sizeof(dev_link_t));
@@ -519,50 +515,27 @@ static dev_link_t *prism2_attach(void)
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* register with CardServices */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- prism2_detach(link);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if (prism2_config(link))
+ PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
+
+ return 0;
}
-static void prism2_detach(dev_link_t *link)
+static void prism2_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
+ dev_link_t *link = dev_to_instance(p_dev);
PDEBUG(DEBUG_FLOW, "prism2_detach\n");
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
- if (*linkp == NULL) {
- printk(KERN_WARNING "%s: Attempt to detach non-existing "
- "PCMCIA client\n", dev_info);
- return;
- }
-
if (link->state & DEV_CONFIG) {
prism2_release((u_long)link);
}
- if (link->handle) {
- int res = pcmcia_deregister_client(link->handle);
- if (res) {
- printk("CardService(DeregisterClient) => %d\n", res);
- cs_error(link->handle, DeregisterClient, res);
- }
- }
-
- *linkp = link->next;
/* release net devices */
if (link->priv) {
struct hostap_cs_priv *hw_priv;
@@ -846,84 +819,58 @@ static void prism2_release(u_long arg)
PDEBUG(DEBUG_FLOW, "release - done\n");
}
-
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args)
+static int hostap_cs_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = (struct net_device *) link->priv;
int dev_open = 0;
+ PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
+
+ link->state |= DEV_SUSPEND;
+
if (link->state & DEV_CONFIG) {
struct hostap_interface *iface = netdev_priv(dev);
if (iface && iface->local)
dev_open = iface->local->num_dev_open > 0;
- }
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_INSERTION\n", dev_info);
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if (prism2_config(link)) {
- PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
- }
- break;
-
- case CS_EVENT_CARD_REMOVAL:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_REMOVAL\n", dev_info);
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
+ if (dev_open) {
netif_stop_queue(dev);
netif_device_detach(dev);
- prism2_release((u_long) link);
}
- break;
+ prism2_suspend(dev);
+ pcmcia_release_configuration(link->handle);
+ }
- case CS_EVENT_PM_SUSPEND:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
- link->state |= DEV_SUSPEND;
- /* fall through */
-
- case CS_EVENT_RESET_PHYSICAL:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_RESET_PHYSICAL\n", dev_info);
- if (link->state & DEV_CONFIG) {
- if (dev_open) {
- netif_stop_queue(dev);
- netif_device_detach(dev);
- }
- prism2_suspend(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
+ return 0;
+}
- case CS_EVENT_PM_RESUME:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
- link->state &= ~DEV_SUSPEND;
- /* fall through */
-
- case CS_EVENT_CARD_RESET:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_RESET\n", dev_info);
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle,
- &link->conf);
- prism2_hw_shutdown(dev, 1);
- prism2_hw_config(dev, dev_open ? 0 : 1);
- if (dev_open) {
- netif_device_attach(dev);
- netif_start_queue(dev);
- }
- }
- break;
+static int hostap_cs_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = (struct net_device *) link->priv;
+ int dev_open = 0;
- default:
- PDEBUG(DEBUG_EXTRA, "%s: prism2_event() - unknown event %d\n",
- dev_info, event);
- break;
+ PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ struct hostap_interface *iface = netdev_priv(dev);
+ if (iface && iface->local)
+ dev_open = iface->local->num_dev_open > 0;
+
+ pcmcia_request_configuration(link->handle, &link->conf);
+
+ prism2_hw_shutdown(dev, 1);
+ prism2_hw_config(dev, dev_open ? 0 : 1);
+ if (dev_open) {
+ netif_device_attach(dev);
+ netif_start_queue(dev);
+ }
}
+
return 0;
}
-
static struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
@@ -982,11 +929,12 @@ static struct pcmcia_driver hostap_driver = {
.drv = {
.name = "hostap_cs",
},
- .attach = prism2_attach,
- .detach = prism2_detach,
+ .probe = prism2_attach,
+ .remove = prism2_detach,
.owner = THIS_MODULE,
- .event = prism2_event,
.id_table = hostap_cs_ids,
+ .suspend = hostap_cs_suspend,
+ .resume = hostap_cs_resume,
};
static int __init init_prism2_pccard(void)
diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap_main.c
index 3d2ea61033b..3d2ea61033b 100644
--- a/drivers/net/wireless/hostap/hostap.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 77d2a21d4cd..44cd3fcd157 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -175,7 +175,7 @@ that only one external action is invoked at a time.
#define DRV_COPYRIGHT "Copyright(c) 2003-2005 Intel Corporation"
/* Debugging stuff */
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
#endif
@@ -208,7 +208,7 @@ MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
static u32 ipw2100_debug_level = IPW_DL_NONE;
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
#define IPW_DEBUG(level, message...) \
do { \
if (ipw2100_debug_level & (level)) { \
@@ -219,9 +219,9 @@ do { \
} while (0)
#else
#define IPW_DEBUG(level, message...) do {} while (0)
-#endif /* CONFIG_IPW_DEBUG */
+#endif /* CONFIG_IPW2100_DEBUG */
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
static const char *command_types[] = {
"undefined",
"unused", /* HOST_ATTENTION */
@@ -2081,7 +2081,7 @@ static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
priv->status &= ~STATUS_SCANNING;
}
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
#define IPW2100_HANDLER(v, f) { v, f, # v }
struct ipw2100_status_indicator {
int status;
@@ -2094,7 +2094,7 @@ struct ipw2100_status_indicator {
int status;
void (*cb) (struct ipw2100_priv * priv, u32 status);
};
-#endif /* CONFIG_IPW_DEBUG */
+#endif /* CONFIG_IPW2100_DEBUG */
static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
{
@@ -2149,7 +2149,7 @@ static void isr_status_change(struct ipw2100_priv *priv, int status)
static void isr_rx_complete_command(struct ipw2100_priv *priv,
struct ipw2100_cmd_header *cmd)
{
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
IPW_DEBUG_HC("Command completed '%s (%d)'\n",
command_types[cmd->host_command_reg],
@@ -2167,7 +2167,7 @@ static void isr_rx_complete_command(struct ipw2100_priv *priv,
wake_up_interruptible(&priv->wait_command_queue);
}
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
static const char *frame_types[] = {
"COMMAND_STATUS_VAL",
"STATUS_CHANGE_VAL",
@@ -2290,7 +2290,7 @@ static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
{
-#ifdef CONFIG_IPW_DEBUG_C3
+#ifdef CONFIG_IPW2100_DEBUG_C3
struct ipw2100_status *status = &priv->status_queue.drv[i];
u32 match, reg;
int j;
@@ -2312,7 +2312,7 @@ static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
}
#endif
-#ifdef CONFIG_IPW_DEBUG_C3
+#ifdef CONFIG_IPW2100_DEBUG_C3
/* Halt the fimrware so we can get a good image */
write_register(priv->net_dev, IPW_REG_RESET_REG,
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
@@ -2716,7 +2716,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
list_del(element);
DEC_STAT(&priv->fw_pend_stat);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
{
int i = txq->oldest;
IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
@@ -2782,7 +2782,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
"something else: ids %d=%d.\n",
priv->net_dev->name, txq->oldest, packet->index);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
if (packet->info.c_struct.cmd->host_command_reg <
sizeof(command_types) / sizeof(*command_types))
IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
@@ -2975,7 +2975,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
packet->index, tbd->host_addr, tbd->buf_length);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
if (packet->info.d_struct.txb->nr_frags > 1)
IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
packet->info.d_struct.txb->nr_frags);
@@ -3827,7 +3827,7 @@ static ssize_t show_stats(struct device *d, struct device_attribute *attr,
priv->rx_interrupts, priv->inta_other);
out += sprintf(out, "firmware resets: %d\n", priv->resets);
out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
out += sprintf(out, "packet mismatch image: %s\n",
priv->snapshot[0] ? "YES" : "NO");
#endif
@@ -3982,7 +3982,7 @@ static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
static ssize_t show_debug_level(struct device_driver *d, char *buf)
{
return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
@@ -4011,7 +4011,7 @@ static ssize_t store_debug_level(struct device_driver *d,
static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
store_debug_level);
-#endif /* CONFIG_IPW_DEBUG */
+#endif /* CONFIG_IPW2100_DEBUG */
static ssize_t show_fatal_error(struct device *d,
struct device_attribute *attr, char *buf)
@@ -4937,7 +4937,7 @@ static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
};
int err;
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
if (bssid != NULL)
IPW_DEBUG_HC("MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
@@ -6858,7 +6858,7 @@ static int __init ipw2100_init(void)
ret = pci_module_init(&ipw2100_pci_driver);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
ipw2100_debug_level = debug;
driver_create_file(&ipw2100_pci_driver.driver,
&driver_attr_debug_level);
@@ -6873,7 +6873,7 @@ static int __init ipw2100_init(void)
static void __exit ipw2100_exit(void)
{
/* FIXME: IPG: check that we have no instances of the devices open */
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
driver_remove_file(&ipw2100_pci_driver.driver,
&driver_attr_debug_level);
#endif
@@ -8558,7 +8558,7 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
quality = min(beacon_qual, min(tx_qual, rssi_qual));
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2100_DEBUG
if (beacon_qual == quality)
IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
else if (tx_qual == quality)
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index 7c65b10bb16..f6c51441fa8 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -73,7 +73,7 @@ struct ipw2100_rx_packet;
* you simply need to add your entry to the ipw2100_debug_levels array.
*
* If you do not see debug_level in /proc/net/ipw2100 then you do not have
- * CONFIG_IPW_DEBUG defined in your kernel configuration
+ * CONFIG_IPW2100_DEBUG defined in your kernel configuration
*
*/
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 5e7c7e944c9..cdfe5020775 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -462,7 +462,7 @@ static inline void ipw_disable_interrupts(struct ipw_priv *priv)
ipw_write32(priv, IPW_INTA_MASK_R, ~IPW_INTA_MASK_ALL);
}
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
static char *ipw_error_desc(u32 val)
{
switch (val) {
@@ -1235,7 +1235,7 @@ static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ipw_priv *priv = dev_get_drvdata(d);
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
struct net_device *dev = priv->net_dev;
#endif
char buffer[] = "00000000";
@@ -1754,7 +1754,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv)
IPW_ERROR("Firmware error detected. Restarting.\n");
if (priv->error) {
IPW_ERROR("Sysfs 'error' log already exists.\n");
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
if (ipw_debug_level & IPW_DL_FW_ERRORS) {
struct ipw_fw_error *error =
ipw_alloc_error_log(priv);
@@ -1770,7 +1770,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv)
else
IPW_ERROR("Error allocating sysfs 'error' "
"log.\n");
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
if (ipw_debug_level & IPW_DL_FW_ERRORS)
ipw_dump_error_log(priv, priv->error);
#endif
@@ -3778,7 +3778,7 @@ static const struct ipw_status_code ipw_status_codes[] = {
{0x2E, "Cipher suite is rejected per security policy"},
};
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
static const char *ipw_get_status_code(u16 status)
{
int i;
@@ -4250,7 +4250,7 @@ static inline void ipw_rx_notification(struct ipw_priv *priv,
if (priv->
status & (STATUS_ASSOCIATED |
STATUS_AUTH)) {
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
struct notif_authenticate *auth
= &notif->u.auth;
IPW_DEBUG(IPW_DL_NOTIF |
@@ -4944,12 +4944,11 @@ static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv)
struct ipw_rx_queue *rxq;
int i;
- rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL);
+ rxq = kzalloc(sizeof(*rxq), GFP_KERNEL);
if (unlikely(!rxq)) {
IPW_ERROR("memory allocation failed\n");
return NULL;
}
- memset(rxq, 0, sizeof(*rxq));
spin_lock_init(&rxq->lock);
INIT_LIST_HEAD(&rxq->rx_free);
INIT_LIST_HEAD(&rxq->rx_used);
@@ -5828,7 +5827,7 @@ static void ipw_bg_adhoc_check(void *data)
up(&priv->sem);
}
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
static void ipw_debug_config(struct ipw_priv *priv)
{
IPW_DEBUG_INFO("Scan completed, no valid APs matched "
@@ -7456,8 +7455,7 @@ static void ipw_handle_data_packet(struct ipw_priv *priv,
/* HW decrypt will not clear the WEP bit, MIC, PN, etc. */
hdr = (struct ieee80211_hdr_4addr *)rxb->skb->data;
if (priv->ieee->iw_mode != IW_MODE_MONITOR &&
- ((is_multicast_ether_addr(hdr->addr1) ||
- is_broadcast_ether_addr(hdr->addr1)) ?
+ (is_multicast_ether_addr(hdr->addr1) ?
!priv->ieee->host_mc_decrypt : !priv->ieee->host_decrypt))
ipw_rebuild_decrypted_skb(priv, rxb->skb);
@@ -7648,8 +7646,7 @@ static inline int is_network_packet(struct ipw_priv *priv,
return 0;
/* {broad,multi}cast packets to our BSSID go through */
- if (is_multicast_ether_addr(header->addr1) ||
- is_broadcast_ether_addr(header->addr1))
+ if (is_multicast_ether_addr(header->addr1))
return !memcmp(header->addr3, priv->bssid, ETH_ALEN);
/* packets to our adapter go through */
@@ -7662,8 +7659,7 @@ static inline int is_network_packet(struct ipw_priv *priv,
return 0;
/* {broad,multi}cast packets to our BSS go through */
- if (is_multicast_ether_addr(header->addr1) ||
- is_broadcast_ether_addr(header->addr1))
+ if (is_multicast_ether_addr(header->addr1))
return !memcmp(header->addr2, priv->bssid, ETH_ALEN);
/* packets to our adapter go through */
@@ -7815,7 +7811,7 @@ static void ipw_rx(struct ipw_priv *priv)
while (i != r) {
rxb = priv->rxq->queue[i];
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
if (unlikely(rxb == NULL)) {
printk(KERN_CRIT "Queue not allocated!\n");
break;
@@ -9657,8 +9653,7 @@ static inline int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb,
switch (priv->ieee->iw_mode) {
case IW_MODE_ADHOC:
hdr_len = IEEE80211_3ADDR_LEN;
- unicast = !(is_multicast_ether_addr(hdr->addr1) ||
- is_broadcast_ether_addr(hdr->addr1));
+ unicast = !is_multicast_ether_addr(hdr->addr1);
id = ipw_find_station(priv, hdr->addr1);
if (id == IPW_INVALID_STATION) {
id = ipw_add_station(priv, hdr->addr1);
@@ -9673,8 +9668,7 @@ static inline int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb,
case IW_MODE_INFRA:
default:
- unicast = !(is_multicast_ether_addr(hdr->addr3) ||
- is_broadcast_ether_addr(hdr->addr3));
+ unicast = !is_multicast_ether_addr(hdr->addr3);
hdr_len = IEEE80211_3ADDR_LEN;
id = 0;
break;
@@ -10956,7 +10950,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
priv->net_dev = net_dev;
priv->pci_dev = pdev;
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
ipw_debug_level = debug;
#endif
spin_lock_init(&priv->lock);
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index 1c98db0652c..e65620a4d79 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -1301,14 +1301,14 @@ struct ipw_priv {
/* debug macros */
-#ifdef CONFIG_IPW_DEBUG
+#ifdef CONFIG_IPW2200_DEBUG
#define IPW_DEBUG(level, fmt, args...) \
do { if (ipw_debug_level & (level)) \
printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
#else
#define IPW_DEBUG(level, fmt, args...) do {} while (0)
-#endif /* CONFIG_IPW_DEBUG */
+#endif /* CONFIG_IPW2200_DEBUG */
/*
* To use the debug system;
@@ -1332,7 +1332,7 @@ do { if (ipw_debug_level & (level)) \
* you simply need to add your entry to the ipw_debug_levels array.
*
* If you do not see debug_level in /proc/net/ipw then you do not have
- * CONFIG_IPW_DEBUG defined in your kernel configuration
+ * CONFIG_IPW2200_DEBUG defined in your kernel configuration
*
*/
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 92793b958e3..bf6271ee387 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -166,8 +166,6 @@ static char *version =
#define DEBUG(n, args...)
#endif
-static dev_info_t dev_info = "netwave_cs";
-
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
@@ -195,12 +193,9 @@ module_param(mem_speed, int, 0);
/* PCMCIA (Card Services) related functions */
static void netwave_release(dev_link_t *link); /* Card removal */
-static int netwave_event(event_t event, int priority,
- event_callback_args_t *args);
static void netwave_pcmcia_config(dev_link_t *arg); /* Runs after card
insertion */
-static dev_link_t *netwave_attach(void); /* Create instance */
-static void netwave_detach(dev_link_t *); /* Destroy instance */
+static void netwave_detach(struct pcmcia_device *p_dev); /* Destroy instance */
/* Hardware configuration */
static void netwave_doreset(kio_addr_t iobase, u_char __iomem *ramBase);
@@ -228,17 +223,6 @@ static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
/*
- A linked list of "instances" of the skeleton device. Each actual
- PCMCIA card corresponds to one device instance, and is described
- by one dev_link_t structure (defined in ds.h).
-
- You may not want to use a linked list for this -- for example, the
- memory card driver uses an array of dev_link_t pointers, where minor
- device numbers are used to derive the corresponding array index.
-*/
-static dev_link_t *dev_list;
-
-/*
A dev_link_t structure has fields for most things that are needed
to keep track of a socket, but there will usually be some device
specific information that also needs to be kept track of. The
@@ -394,20 +378,18 @@ static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
-static dev_link_t *netwave_attach(void)
+static int netwave_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
netwave_private *priv;
- int ret;
-
+
DEBUG(0, "netwave_attach()\n");
-
+
/* Initialize the dev_link_t structure */
dev = alloc_etherdev(sizeof(netwave_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
link = &priv->link;
link->priv = dev;
@@ -449,21 +431,14 @@ static dev_link_t *netwave_attach(void)
dev->open = &netwave_open;
dev->stop = &netwave_close;
link->irq.Instance = dev;
-
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- netwave_detach(link);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ netwave_pcmcia_config( link);
+
+ return 0;
} /* netwave_attach */
/*
@@ -474,42 +449,20 @@ static dev_link_t *netwave_attach(void)
* structures are freed. Otherwise, the structures will be freed
* when the device is released.
*/
-static void netwave_detach(dev_link_t *link)
+static void netwave_detach(struct pcmcia_device *p_dev)
{
- struct net_device *dev = link->priv;
- dev_link_t **linkp;
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
- DEBUG(0, "netwave_detach(0x%p)\n", link);
-
- /*
- If the device is currently configured and active, we won't
- actually delete it yet. Instead, it is marked so that when
- the release() function is called, that will trigger a proper
- detach().
- */
- if (link->state & DEV_CONFIG)
- netwave_release(link);
-
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- {
- DEBUG(1, "netwave_cs: detach fail, '%s' not in list\n",
- link->dev->dev_name);
- return;
- }
-
- /* Unlink device structure, free pieces */
- *linkp = link->next;
- if (link->dev)
- unregister_netdev(dev);
- free_netdev(dev);
-
+ DEBUG(0, "netwave_detach(0x%p)\n", link);
+
+ if (link->state & DEV_CONFIG)
+ netwave_release(link);
+
+ if (link->dev)
+ unregister_netdev(dev);
+
+ free_netdev(dev);
} /* netwave_detach */
/*
@@ -935,69 +888,38 @@ static void netwave_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/*
- * Function netwave_event (event, priority, args)
- *
- * The card status event handler. Mostly, this schedules other
- * stuff to run after an event is received. A CARD_REMOVAL event
- * also sets some flags to discourage the net drivers from trying
- * to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag
- * to block future accesses to this device. All the functions that
- * actually access the device should check this flag to make sure
- * the card is still present.
- *
- */
-static int netwave_event(event_t event, int priority,
- event_callback_args_t *args)
+static int netwave_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
-
- DEBUG(1, "netwave_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_REGISTRATION_COMPLETE:
- DEBUG(0, "netwave_cs: registration complete\n");
- break;
-
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- netif_device_detach(dev);
- netwave_release(link);
- }
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- netwave_pcmcia_config( link);
- break;
- case CS_EVENT_PM_SUSPEND:
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
+
+ return 0;
+}
+
+static int netwave_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- netwave_reset(dev);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ netwave_reset(dev);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
-} /* netwave_event */
+
+ return 0;
+}
+
/*
* Function netwave_doreset (ioBase, ramBase)
@@ -1491,10 +1413,11 @@ static struct pcmcia_driver netwave_driver = {
.drv = {
.name = "netwave_cs",
},
- .attach = netwave_attach,
- .event = netwave_event,
- .detach = netwave_detach,
+ .probe = netwave_attach,
+ .remove = netwave_detach,
.id_table = netwave_ids,
+ .suspend = netwave_suspend,
+ .resume = netwave_resume,
};
static int __init init_netwave_cs(void)
@@ -1505,7 +1428,6 @@ static int __init init_netwave_cs(void)
static void __exit exit_netwave_cs(void)
{
pcmcia_unregister_driver(&netwave_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_netwave_cs);
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index dc1128a0097..b664708481c 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -43,17 +43,6 @@ module_param(ignore_cis_vcc, int, 0);
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
-/* Magic constants */
-/********************************************************************/
-
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card
- * configuration database.
- */
-static dev_info_t dev_info = DRIVER_NAME;
-
-/********************************************************************/
/* Data structures */
/********************************************************************/
@@ -69,19 +58,14 @@ struct orinoco_pccard {
unsigned long hard_reset_in_progress;
};
-/*
- * A linked list of "instances" of the device. Each actual PCMCIA
- * card corresponds to one device instance, and is described by one
- * dev_link_t structure (defined in ds.h).
- */
-static dev_link_t *dev_list; /* = NULL */
/********************************************************************/
/* Function prototypes */
/********************************************************************/
+static void orinoco_cs_config(dev_link_t *link);
static void orinoco_cs_release(dev_link_t *link);
-static void orinoco_cs_detach(dev_link_t *link);
+static void orinoco_cs_detach(struct pcmcia_device *p_dev);
/********************************************************************/
/* Device methods */
@@ -119,19 +103,17 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event. */
-static dev_link_t *
-orinoco_cs_attach(void)
+static int
+orinoco_cs_attach(struct pcmcia_device *p_dev)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
if (! dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
card = priv->card;
@@ -154,22 +136,15 @@ orinoco_cs_attach(void)
link->conf.IntType = INT_MEMORY_AND_IO;
/* Register with Card Services */
- /* FIXME: need a lock? */
- link->next = dev_list;
- dev_list = link;
-
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210; /* FIXME: what does this mean? */
- client_reg.event_callback_args.client_data = link;
-
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- orinoco_cs_detach(link);
- return NULL;
- }
+ link->next = NULL;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ orinoco_cs_config(link);
- return link;
+ return 0;
} /* orinoco_cs_attach */
/*
@@ -178,27 +153,14 @@ orinoco_cs_attach(void)
* are freed. Otherwise, the structures will be freed when the device
* is released.
*/
-static void orinoco_cs_detach(dev_link_t *link)
+static void orinoco_cs_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
-
- BUG_ON(*linkp == NULL);
-
if (link->state & DEV_CONFIG)
orinoco_cs_release(link);
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, and free it */
- *linkp = link->next;
DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
if (link->dev) {
DEBUG(0, PFX "About to unregister net device %p\n",
@@ -465,106 +427,82 @@ orinoco_cs_release(dev_link_t *link)
ioport_unmap(priv->hw.iobase);
} /* orinoco_cs_release */
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received.
- */
-static int
-orinoco_cs_event(event_t event, int priority,
- event_callback_args_t * args)
+static int orinoco_cs_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
struct orinoco_private *priv = netdev_priv(dev);
struct orinoco_pccard *card = priv->card;
int err = 0;
unsigned long flags;
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- unsigned long flags;
-
+ link->state |= DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ /* This is probably racy, but I can't think of
+ a better way, short of rewriting the PCMCIA
+ layer to not suck :-( */
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
spin_lock_irqsave(&priv->lock, flags);
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d downing interface\n",
+ dev->name, err);
+
netif_device_detach(dev);
priv->hw_unavailable++;
+
spin_unlock_irqrestore(&priv->lock, flags);
}
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- orinoco_cs_config(link);
- break;
+ pcmcia_release_configuration(link->handle);
+ }
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- /* Mark the device as stopped, to block IO until later */
- if (link->state & DEV_CONFIG) {
- /* This is probably racy, but I can't think of
- a better way, short of rewriting the PCMCIA
- layer to not suck :-( */
- if (! test_bit(0, &card->hard_reset_in_progress)) {
- spin_lock_irqsave(&priv->lock, flags);
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: %s: Error %d downing interface\n",
- dev->name,
- event == CS_EVENT_PM_SUSPEND ? "SUSPEND" : "RESET_PHYSICAL",
- err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
-
- spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static int orinoco_cs_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ int err = 0;
+ unsigned long flags;
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ /* FIXME: should we double check that this is
+ * the same card as we had before */
+ pcmcia_request_configuration(link->handle, &link->conf);
+
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+ dev->name, err);
+ return -EIO;
}
- pcmcia_release_configuration(link->handle);
- }
- break;
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- /* FIXME: should we double check that this is
- * the same card as we had before */
- pcmcia_request_configuration(link->handle, &link->conf);
-
- if (! test_bit(0, &card->hard_reset_in_progress)) {
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+ if (priv->open && ! priv->hw_unavailable) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card\n",
dev->name, err);
- break;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
-
- if (priv->open && ! priv->hw_unavailable) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
-
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
}
+
+ spin_unlock_irqrestore(&priv->lock, flags);
}
- break;
}
- return err;
-} /* orinoco_cs_event */
+ return 0;
+}
+
/********************************************************************/
/* Module initialization */
@@ -665,10 +603,11 @@ static struct pcmcia_driver orinoco_driver = {
.drv = {
.name = DRIVER_NAME,
},
- .attach = orinoco_cs_attach,
- .detach = orinoco_cs_detach,
- .event = orinoco_cs_event,
+ .probe = orinoco_cs_attach,
+ .remove = orinoco_cs_detach,
.id_table = orinoco_cs_ids,
+ .suspend = orinoco_cs_suspend,
+ .resume = orinoco_cs_resume,
};
static int __init
@@ -683,7 +622,6 @@ static void __exit
exit_orinoco_cs(void)
{
pcmcia_unregister_driver(&orinoco_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_orinoco_cs);
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 70fd6fd8feb..319180ca7e7 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -92,9 +92,7 @@ module_param(pc_debug, int, 0);
/** Prototypes based on PCMCIA skeleton driver *******************************/
static void ray_config(dev_link_t *link);
static void ray_release(dev_link_t *link);
-static int ray_event(event_t event, int priority, event_callback_args_t *args);
-static dev_link_t *ray_attach(void);
-static void ray_detach(dev_link_t *);
+static void ray_detach(struct pcmcia_device *p_dev);
/***** Prototypes indicated by device structure ******************************/
static int ray_dev_close(struct net_device *dev);
@@ -192,12 +190,6 @@ static int bc;
static char *phy_addr = NULL;
-/* The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-static dev_info_t dev_info = "ray_cs";
-
/* A linked list of "instances" of the ray device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -314,12 +306,10 @@ static char rcsid[] = "Raylink/WebGear wireless LAN - Corey <Thomas corey@world.
configure the card at this point -- we wait until we receive a
card insertion event.
=============================================================================*/
-static dev_link_t *ray_attach(void)
+static int ray_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
ray_dev_t *local;
- int ret;
struct net_device *dev;
DEBUG(1, "ray_attach()\n");
@@ -328,7 +318,7 @@ static dev_link_t *ray_attach(void)
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link)
- return NULL;
+ return -ENOMEM;
/* Allocate space for private device-specific data */
dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -387,30 +377,19 @@ static dev_link_t *ray_attach(void)
dev->stop = &ray_dev_close;
netif_stop_queue(dev);
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
+ init_timer(&local->timer);
- DEBUG(2,"ray_cs ray_attach calling pcmcia_register_client(...)\n");
+ link->handle = p_dev;
+ p_dev->instance = link;
- init_timer(&local->timer);
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ ray_config(link);
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- printk("ray_cs ray_attach RegisterClient unhappy - detaching\n");
- cs_error(link->handle, RegisterClient, ret);
- ray_detach(link);
- return NULL;
- }
- DEBUG(2,"ray_cs ray_attach ending\n");
- return link;
+ return 0;
fail_alloc_dev:
kfree(link);
- return NULL;
+ return -ENOMEM;
} /* ray_attach */
/*=============================================================================
This deletes a driver "instance". The device is de-registered
@@ -418,9 +397,12 @@ fail_alloc_dev:
structures are freed. Otherwise, the structures will be freed
when the device is released.
=============================================================================*/
-static void ray_detach(dev_link_t *link)
+static void ray_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
dev_link_t **linkp;
+ struct net_device *dev;
+ ray_dev_t *local;
DEBUG(1, "ray_detach(0x%p)\n", link);
@@ -430,22 +412,18 @@ static void ray_detach(dev_link_t *link)
if (*linkp == NULL)
return;
- /* If the device is currently configured and active, we won't
- actually delete it yet. Instead, it is marked so that when
- the release() function is called, that will trigger a proper
- detach().
- */
- if (link->state & DEV_CONFIG)
- ray_release(link);
+ dev = link->priv;
+
+ if (link->state & DEV_CONFIG) {
+ ray_release(link);
+
+ local = (ray_dev_t *)dev->priv;
+ del_timer(&local->timer);
+ }
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
/* Unlink device structure, free pieces */
*linkp = link->next;
if (link->priv) {
- struct net_device *dev = link->priv;
if (link->dev) unregister_netdev(dev);
free_netdev(dev);
}
@@ -891,65 +869,40 @@ static void ray_release(dev_link_t *link)
DEBUG(2,"ray_release ending\n");
}
-/*=============================================================================
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
- When a CARD_REMOVAL event is received, we immediately set a flag
- to block future accesses to this device. All the functions that
- actually access the device should check this flag to make sure
- the card is still present.
-=============================================================================*/
-static int ray_event(event_t event, int priority,
- event_callback_args_t *args)
+static int ray_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
- struct net_device *dev = link->priv;
- ray_dev_t *local = (ray_dev_t *)dev->priv;
- DEBUG(1, "ray_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- netif_device_detach(dev);
- if (link->state & DEV_CONFIG) {
- ray_release(link);
- del_timer(&local->timer);
- }
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- ray_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ link->state |= DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
+ if (link->open)
+ netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
+ pcmcia_release_configuration(link->handle);
}
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
+
+
+ return 0;
+}
+
+static int ray_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- ray_reset(dev);
- netif_device_attach(dev);
- }
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ ray_reset(dev);
+ netif_device_attach(dev);
+ }
}
- break;
- }
- return 0;
- DEBUG(2,"ray_event ending\n");
-} /* ray_event */
+
+ return 0;
+}
+
/*===========================================================================*/
int ray_dev_init(struct net_device *dev)
{
@@ -2945,10 +2898,11 @@ static struct pcmcia_driver ray_driver = {
.drv = {
.name = "ray_cs",
},
- .attach = ray_attach,
- .event = ray_event,
- .detach = ray_detach,
+ .probe = ray_attach,
+ .remove = ray_detach,
.id_table = ray_ids,
+ .suspend = ray_suspend,
+ .resume = ray_resume,
};
static int __init init_ray_cs(void)
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index b1bbc8e8e91..fee4be1ce81 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -57,17 +57,6 @@ module_param(ignore_cis_vcc, int, 0);
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
-/* Magic constants */
-/********************************************************************/
-
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card
- * configuration database.
- */
-static dev_info_t dev_info = DRIVER_NAME;
-
-/********************************************************************/
/* Data structures */
/********************************************************************/
@@ -78,19 +67,12 @@ struct orinoco_pccard {
dev_node_t node;
};
-/*
- * A linked list of "instances" of the device. Each actual PCMCIA
- * card corresponds to one device instance, and is described by one
- * dev_link_t structure (defined in ds.h).
- */
-static dev_link_t *dev_list; /* = NULL */
-
/********************************************************************/
/* Function prototypes */
/********************************************************************/
+static void spectrum_cs_config(dev_link_t *link);
static void spectrum_cs_release(dev_link_t *link);
-static void spectrum_cs_detach(dev_link_t *link);
/********************************************************************/
/* Firmware downloader */
@@ -601,19 +583,17 @@ spectrum_cs_hard_reset(struct orinoco_private *priv)
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event. */
-static dev_link_t *
-spectrum_cs_attach(void)
+static int
+spectrum_cs_attach(struct pcmcia_device *p_dev)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
if (! dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
card = priv->card;
@@ -635,23 +615,13 @@ spectrum_cs_attach(void)
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* Register with Card Services */
- /* FIXME: need a lock? */
- link->next = dev_list;
- dev_list = link;
+ link->handle = p_dev;
+ p_dev->instance = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210; /* FIXME: what does this mean? */
- client_reg.event_callback_args.client_data = link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ spectrum_cs_config(link);
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- spectrum_cs_detach(link);
- return NULL;
- }
-
- return link;
+ return 0;
} /* spectrum_cs_attach */
/*
@@ -660,27 +630,14 @@ spectrum_cs_attach(void)
* are freed. Otherwise, the structures will be freed when the device
* is released.
*/
-static void spectrum_cs_detach(dev_link_t *link)
+static void spectrum_cs_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
-
- BUG_ON(*linkp == NULL);
-
if (link->state & DEV_CONFIG)
spectrum_cs_release(link);
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Unlink device structure, and free it */
- *linkp = link->next;
DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
if (link->dev) {
DEBUG(0, PFX "About to unregister net device %p\n",
@@ -948,82 +905,56 @@ spectrum_cs_release(dev_link_t *link)
ioport_unmap(priv->hw.iobase);
} /* spectrum_cs_release */
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received.
- */
+
static int
-spectrum_cs_event(event_t event, int priority,
- event_callback_args_t * args)
+spectrum_cs_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
unsigned long flags;
+ int err = 0;
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- unsigned long flags;
+ link->state |= DEV_SUSPEND;
+ /* Mark the device as stopped, to block IO until later */
+ if (link->state & DEV_CONFIG) {
+ spin_lock_irqsave(&priv->lock, flags);
- spin_lock_irqsave(&priv->lock, flags);
- netif_device_detach(dev);
- priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- break;
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d downing interface\n",
+ dev->name, err);
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- spectrum_cs_config(link);
- break;
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- /* Mark the device as stopped, to block IO until later */
- if (link->state & DEV_CONFIG) {
- /* This is probably racy, but I can't think of
- a better way, short of rewriting the PCMCIA
- layer to not suck :-( */
- spin_lock_irqsave(&priv->lock, flags);
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: %s: Error %d downing interface\n",
- dev->name,
- event == CS_EVENT_PM_SUSPEND ? "SUSPEND" : "RESET_PHYSICAL",
- err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pcmcia_release_configuration(link->handle);
- }
- break;
+ spin_unlock_irqrestore(&priv->lock, flags);
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- /* FIXME: should we double check that this is
- * the same card as we had before */
- pcmcia_request_configuration(link->handle, &link->conf);
- netif_device_attach(dev);
- priv->hw_unavailable--;
- schedule_work(&priv->reset_work);
- }
- break;
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
+
+static int
+spectrum_cs_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ link->state &= ~DEV_SUSPEND;
+ if (link->state & DEV_CONFIG) {
+ /* FIXME: should we double check that this is
+ * the same card as we had before */
+ pcmcia_request_configuration(link->handle, &link->conf);
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
+ schedule_work(&priv->reset_work);
}
+ return 0;
+}
- return err;
-} /* spectrum_cs_event */
/********************************************************************/
/* Module initialization */
@@ -1048,9 +979,10 @@ static struct pcmcia_driver orinoco_driver = {
.drv = {
.name = DRIVER_NAME,
},
- .attach = spectrum_cs_attach,
- .detach = spectrum_cs_detach,
- .event = spectrum_cs_event,
+ .probe = spectrum_cs_attach,
+ .remove = spectrum_cs_detach,
+ .suspend = spectrum_cs_suspend,
+ .resume = spectrum_cs_resume,
.id_table = spectrum_cs_ids,
};
@@ -1066,7 +998,6 @@ static void __exit
exit_spectrum_cs(void)
{
pcmcia_unregister_driver(&orinoco_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_spectrum_cs);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index c822cad3333..7e2039f52c4 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4594,14 +4594,12 @@ wavelan_close(struct net_device * dev)
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
-static dev_link_t *
-wavelan_attach(void)
+static int
+wavelan_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg; /* Register with cardmgr */
dev_link_t * link; /* Info for cardmgr */
struct net_device * dev; /* Interface generic data */
net_local * lp; /* Interface specific data */
- int ret;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "-> wavelan_attach()\n");
@@ -4609,7 +4607,7 @@ wavelan_attach(void)
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
- if (!link) return NULL;
+ if (!link) return -ENOMEM;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 8;
@@ -4627,14 +4625,13 @@ wavelan_attach(void)
link->conf.IntType = INT_MEMORY_AND_IO;
/* Chain drivers */
- link->next = dev_list;
- dev_list = link;
+ link->next = NULL;
/* Allocate the generic data structure */
dev = alloc_etherdev(sizeof(net_local));
if (!dev) {
kfree(link);
- return NULL;
+ return -ENOMEM;
}
link->priv = link->irq.Instance = dev;
@@ -4679,28 +4676,21 @@ wavelan_attach(void)
/* Other specific data */
dev->mtu = WAVELAN_MTU;
- /* Register with Card Services */
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
+ link->handle = p_dev;
+ p_dev->instance = link;
-#ifdef DEBUG_CONFIG_INFO
- printk(KERN_DEBUG "wavelan_attach(): almost done, calling pcmcia_register_client\n");
-#endif
-
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if(ret != 0)
- {
- cs_error(link->handle, RegisterClient, ret);
- wavelan_detach(link);
- return NULL;
- }
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if(wv_pcmcia_config(link) &&
+ wv_hw_config(dev))
+ wv_init_info(dev);
+ else
+ dev->irq = 0;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "<- wavelan_attach()\n");
#endif
- return link;
+ return 0;
}
/*------------------------------------------------------------------*/
@@ -4711,8 +4701,10 @@ wavelan_attach(void)
* is released.
*/
static void
-wavelan_detach(dev_link_t * link)
+wavelan_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
+
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
#endif
@@ -4729,31 +4721,6 @@ wavelan_detach(dev_link_t * link)
wv_pcmcia_release(link);
}
- /* Break the link with Card Services */
- if(link->handle)
- pcmcia_deregister_client(link->handle);
-
- /* Remove the interface data from the linked list */
- if(dev_list == link)
- dev_list = link->next;
- else
- {
- dev_link_t * prev = dev_list;
-
- while((prev != (dev_link_t *) NULL) && (prev->next != link))
- prev = prev->next;
-
- if(prev == (dev_link_t *) NULL)
- {
-#ifdef DEBUG_CONFIG_ERRORS
- printk(KERN_WARNING "wavelan_detach : Attempting to remove a nonexistent device.\n");
-#endif
- return;
- }
-
- prev->next = link->next;
- }
-
/* Free pieces */
if(link->priv)
{
@@ -4775,65 +4742,11 @@ wavelan_detach(dev_link_t * link)
#endif
}
-/*------------------------------------------------------------------*/
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received. A CARD_REMOVAL event also sets
- * some flags to discourage the net drivers from trying to talk to the
- * card any more.
- */
-static int
-wavelan_event(event_t event, /* The event received */
- int priority,
- event_callback_args_t * args)
+static int wavelan_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t * link = (dev_link_t *) args->client_data;
- struct net_device * dev = (struct net_device *) link->priv;
-
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "->wavelan_event(): %s\n",
- ((event == CS_EVENT_REGISTRATION_COMPLETE)?"registration complete" :
- ((event == CS_EVENT_CARD_REMOVAL) ? "card removal" :
- ((event == CS_EVENT_CARD_INSERTION) ? "card insertion" :
- ((event == CS_EVENT_PM_SUSPEND) ? "pm suspend" :
- ((event == CS_EVENT_RESET_PHYSICAL) ? "physical reset" :
- ((event == CS_EVENT_PM_RESUME) ? "pm resume" :
- ((event == CS_EVENT_CARD_RESET) ? "card reset" :
- "unknown"))))))));
-#endif
-
- switch(event)
- {
- case CS_EVENT_REGISTRATION_COMPLETE:
-#ifdef DEBUG_CONFIG_INFO
- printk(KERN_DEBUG "wavelan_cs: registration complete\n");
-#endif
- break;
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device * dev = (struct net_device *) link->priv;
- case CS_EVENT_CARD_REMOVAL:
- /* Oups ! The card is no more there */
- link->state &= ~DEV_PRESENT;
- if(link->state & DEV_CONFIG)
- {
- /* Accept no more transmissions */
- netif_device_detach(dev);
-
- /* Release the card */
- wv_pcmcia_release(link);
- }
- break;
-
- case CS_EVENT_CARD_INSERTION:
- /* Reset and configure the card */
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if(wv_pcmcia_config(link) &&
- wv_hw_config(dev))
- wv_init_info(dev);
- else
- dev->irq = 0;
- break;
-
- case CS_EVENT_PM_SUSPEND:
/* NB: wavelan_close will be called, but too late, so we are
* obliged to close nicely the wavelan here. David, could you
* close the device before suspending them ? And, by the way,
@@ -4848,38 +4761,37 @@ wavelan_event(event_t event, /* The event received */
/* The card is now suspended */
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
+
if(link->state & DEV_CONFIG)
- {
- if(link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
+ {
+ if(link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
+
+static int wavelan_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device * dev = (struct net_device *) link->priv;
- case CS_EVENT_PM_RESUME:
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if(link->state & DEV_CONFIG)
- {
- pcmcia_request_configuration(link->handle, &link->conf);
- if(link->open) /* If RESET -> True, If RESUME -> False ? */
- {
- wv_hw_reset(dev);
- netif_device_attach(dev);
- }
- }
- break;
- }
+ {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if(link->open) /* If RESET -> True, If RESUME -> False ? */
+ {
+ wv_hw_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "<-wavelan_event()\n");
-#endif
- return 0;
+ return 0;
}
+
static struct pcmcia_device_id wavelan_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
@@ -4894,10 +4806,11 @@ static struct pcmcia_driver wavelan_driver = {
.drv = {
.name = "wavelan_cs",
},
- .attach = wavelan_attach,
- .event = wavelan_event,
- .detach = wavelan_detach,
+ .probe = wavelan_attach,
+ .remove = wavelan_detach,
.id_table = wavelan_ids,
+ .suspend = wavelan_suspend,
+ .resume = wavelan_resume,
};
static int __init
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index 724a715089c..f2d59756815 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -754,20 +754,11 @@ static void
static int
wavelan_open(struct net_device *), /* Open the device */
wavelan_close(struct net_device *); /* Close the device */
-static dev_link_t *
- wavelan_attach(void); /* Create a new device */
static void
- wavelan_detach(dev_link_t *); /* Destroy a removed device */
-static int
- wavelan_event(event_t, /* Manage pcmcia events */
- int,
- event_callback_args_t *);
+ wavelan_detach(struct pcmcia_device *p_dev); /* Destroy a removed device */
/**************************** VARIABLES ****************************/
-static dev_info_t dev_info = "wavelan_cs";
-static dev_link_t *dev_list = NULL; /* Linked list of devices */
-
/*
* Parameters that can be set with 'insmod'
* The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 978fdc60678..48e10b0c7e7 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -105,7 +105,6 @@ module_param(pc_debug, int, 0);
*/
static void wl3501_config(dev_link_t *link);
static void wl3501_release(dev_link_t *link);
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args);
/*
* The dev_info variable is the "key" that is used to match up this
@@ -1498,9 +1497,11 @@ static struct ethtool_ops ops = {
* Services. If it has been released, all local data structures are freed.
* Otherwise, the structures will be freed when the device is released.
*/
-static void wl3501_detach(dev_link_t *link)
+static void wl3501_detach(struct pcmcia_device *p_dev)
{
+ dev_link_t *link = dev_to_instance(p_dev);
dev_link_t **linkp;
+ struct net_device *dev = link->priv;
/* Locate device structure */
for (linkp = &wl3501_dev_list; *linkp; linkp = &(*linkp)->next)
@@ -1514,16 +1515,12 @@ static void wl3501_detach(dev_link_t *link)
* function is called, that will trigger a proper detach(). */
if (link->state & DEV_CONFIG) {
-#ifdef PCMCIA_DEBUG
- printk(KERN_DEBUG "wl3501_cs: detach postponed, '%s' "
- "still locked\n", link->dev->dev_name);
-#endif
- goto out;
- }
+ while (link->open > 0)
+ wl3501_close(dev);
- /* Break the link with Card Services */
- if (link->handle)
- pcmcia_deregister_client(link->handle);
+ netif_device_detach(dev);
+ wl3501_release(link);
+ }
/* Unlink device structure, free pieces */
*linkp = link->next;
@@ -1956,18 +1953,16 @@ static const struct iw_handler_def wl3501_handler_def = {
* The dev_link structure is initialized, but we don't actually configure the
* card at this point -- we wait until we receive a card insertion event.
*/
-static dev_link_t *wl3501_attach(void)
+static int wl3501_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
struct wl3501_card *this;
- int ret;
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
- goto out;
+ return -ENOMEM;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 16;
@@ -2003,24 +1998,17 @@ static dev_link_t *wl3501_attach(void)
netif_stop_queue(dev);
link->priv = link->irq.Instance = dev;
- /* Register with Card Services */
- link->next = wl3501_dev_list;
- wl3501_dev_list = link;
- client_reg.dev_info = &wl3501_dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret) {
- cs_error(link->handle, RegisterClient, ret);
- wl3501_detach(link);
- link = NULL;
- }
-out:
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ wl3501_config(link);
+
+ return 0;
out_link:
kfree(link);
link = NULL;
- goto out;
+ return -ENOMEM;
}
#define CS_CHECK(fn, ret) \
@@ -2173,67 +2161,41 @@ static void wl3501_release(dev_link_t *link)
link->state &= ~DEV_CONFIG;
}
-/**
- * wl3501_event - The card status event handler
- * @event - event
- * @pri - priority
- * @args - arguments for this event
- *
- * The card status event handler. Mostly, this schedules other stuff to run
- * after an event is received. A CARD_REMOVAL event also sets some flags to
- * discourage the net drivers from trying to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag to block
- * future accesses to this device. All the functions that actually access the
- * device should check this flag to make sure the card is still present.
- */
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args)
+static int wl3501_suspend(struct pcmcia_device *p_dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(p_dev);
struct net_device *dev = link->priv;
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- while (link->open > 0)
- wl3501_close(dev);
+ link->state |= DEV_SUSPEND;
+
+ wl3501_pwr_mgmt(dev->priv, WL3501_SUSPEND);
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
netif_device_detach(dev);
- wl3501_release(link);
- }
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- wl3501_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
- link->state |= DEV_SUSPEND;
- wl3501_pwr_mgmt(dev->priv, WL3501_SUSPEND);
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
- if (link->state & DEV_CONFIG) {
- if (link->open)
- netif_device_detach(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
- case CS_EVENT_PM_RESUME:
- link->state &= ~DEV_SUSPEND;
- wl3501_pwr_mgmt(dev->priv, WL3501_RESUME);
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- if (link->open) {
- wl3501_reset(dev);
- netif_device_attach(dev);
- }
+ pcmcia_release_configuration(link->handle);
+ }
+
+ return 0;
+}
+
+static int wl3501_resume(struct pcmcia_device *p_dev)
+{
+ dev_link_t *link = dev_to_instance(p_dev);
+ struct net_device *dev = link->priv;
+
+ wl3501_pwr_mgmt(dev->priv, WL3501_RESUME);
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ wl3501_reset(dev);
+ netif_device_attach(dev);
}
- break;
}
+
return 0;
}
+
static struct pcmcia_device_id wl3501_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0001),
PCMCIA_DEVICE_NULL
@@ -2245,10 +2207,11 @@ static struct pcmcia_driver wl3501_driver = {
.drv = {
.name = "wl3501_cs",
},
- .attach = wl3501_attach,
- .event = wl3501_event,
- .detach = wl3501_detach,
+ .probe = wl3501_attach,
+ .remove = wl3501_detach,
.id_table = wl3501_ids,
+ .suspend = wl3501_suspend,
+ .resume = wl3501_resume,
};
static int __init wl3501_init_module(void)