summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig4
-rw-r--r--drivers/net/appletalk/ltpc.c2
-rw-r--r--drivers/net/b44.h2
-rw-r--r--drivers/net/e100.c2
-rw-r--r--drivers/net/e1000e/e1000.h2
-rw-r--r--drivers/net/ehea/ehea.h2
-rw-r--r--drivers/net/igbvf/igbvf.h2
-rw-r--r--drivers/net/ipg.h2
-rw-r--r--drivers/net/mlx4/en_netdev.c2
-rw-r--r--drivers/net/niu.h4
-rw-r--r--drivers/net/qlge/qlge_main.c2
-rw-r--r--drivers/net/qlge/qlge_mpi.c6
-rw-r--r--drivers/net/skfp/h/smt.h2
-rw-r--r--drivers/net/tokenring/3c359.c2
-rw-r--r--drivers/net/tokenring/lanstreamer.c2
-rw-r--r--drivers/net/tokenring/olympic.c2
-rw-r--r--drivers/net/ucc_geth_ethtool.c2
-rw-r--r--drivers/net/usb/usbnet.c2
-rw-r--r--drivers/net/wireless/Kconfig2
-rw-r--r--drivers/net/wireless/hostap/Kconfig8
-rw-r--r--drivers/net/wireless/iwlwifi/Kconfig4
-rw-r--r--drivers/net/wireless/rndis_wlan.c2
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig14
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h2
-rw-r--r--drivers/net/wireless/wavelan_cs.c2
25 files changed, 39 insertions, 39 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f3c4a3b910b..3111b6c7cbc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1880,7 +1880,7 @@ config FEC_MPC52xx
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
- If compiled as module, it will be called 'fec_mpc52xx.ko'.
+ If compiled as module, it will be called fec_mpc52xx.
config FEC_MPC52xx_MDIO
bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO
(Motorola? industry standard).
If your board uses an external PHY connected to FEC, enable this.
If not sure, enable.
- If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+ If compiled as module, it will be called fec_mpc52xx_phy.
config NE_H8300
tristate "NE2000 compatible support for H8/300"
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 78cc7146913..b642647170b 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
if (ints[0] > 2) {
dma = ints[3];
}
- /* ignore any other paramters */
+ /* ignore any other parameters */
}
return 1;
}
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index e678498de6d..d24158e7f30 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -97,7 +97,7 @@
#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */
#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */
-#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */
+#define DMARX_STAT_SDISABLED 0x00000000 /* State Disabled */
#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */
#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */
#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 0f9ee134855..af5364f4955 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2785,7 +2785,7 @@ static int e100_resume(struct pci_dev *pdev)
/* ack any pending wake events, disable PME */
pci_enable_wake(pdev, 0, 0);
- /* disbale reverse auto-negotiation */
+ /* disable reverse auto-negotiation */
if (nic->phy == phy_82552_v) {
u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
E100_82552_SMARTSPEED);
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f37360aa12a..44f0bf23daf 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,7 +62,7 @@ struct e1000_info;
e_printk(KERN_NOTICE, adapter, format, ## arg)
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
#define E1000E_INT_MODE_LEGACY 0
#define E1000E_INT_MODE_MSI 1
#define E1000E_INT_MODE_MSIX 2
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 16a41389575..78952f8324e 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
};
/*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
*/
struct ehea_eq_attr {
u32 type;
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 4bff35e4687..d488733893a 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -45,7 +45,7 @@ struct igbvf_adapter;
/* Interrupt defines */
#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
#define IGBVF_INT_MODE_LEGACY 0
#define IGBVF_INT_MODE_MSI 1
#define IGBVF_INT_MODE_MSIX 2
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index dd9318f1949..dfc2541bb55 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -514,7 +514,7 @@ enum ipg_regs {
#define IPG_DMALIST_ALIGN_PAD 0x07
#define IPG_MULTICAST_HASHTABLE_SIZE 0x40
-/* Number of miliseconds to wait after issuing a software reset.
+/* Number of milliseconds to wait after issuing a software reset.
* 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
*/
#define IPG_AC_RESETWAIT 0x05
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 7bcc49de163..e8eeef0c9c9 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -371,7 +371,7 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
int i;
/* If we haven't received a specific coalescing setting
- * (module param), we set the moderation paramters as follows:
+ * (module param), we set the moderation parameters as follows:
* - moder_cnt is set to the number of mtu sized packets to
* satisfy our coelsing target.
* - moder_time is set to a fixed value.
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 8754e44cada..3bd0b5933d5 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3242,8 +3242,8 @@ struct niu {
struct niu_parent *parent;
u32 flags;
-#define NIU_FLAGS_HOTPLUG_PHY_PRESENT 0x02000000 /* Removebale PHY detected*/
-#define NIU_FLAGS_HOTPLUG_PHY 0x01000000 /* Removebale PHY */
+#define NIU_FLAGS_HOTPLUG_PHY_PRESENT 0x02000000 /* Removeable PHY detected*/
+#define NIU_FLAGS_HOTPLUG_PHY 0x01000000 /* Removeable PHY */
#define NIU_FLAGS_VPD_VALID 0x00800000 /* VPD has valid version */
#define NIU_FLAGS_MSIX 0x00400000 /* MSI-X in use */
#define NIU_FLAGS_MCAST 0x00200000 /* multicast filter enabled */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c92ced24794..1fd5ecb2442 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3174,7 +3174,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
if (value & RST_FO_FR) {
QPRINTK(qdev, IFDOWN, ERR,
- "ETIMEOUT!!! errored out of resetting the chip!\n");
+ "ETIMEDOUT!!! errored out of resetting the chip!\n");
status = -ETIMEDOUT;
}
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 9f81b797f10..ac9493f6c1a 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -141,7 +141,7 @@ end:
/* We are being asked by firmware to accept
* a change to the port. This is only
* a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode. We wake up a worker
+ * parameters, or loopback mode. We wake up a worker
* to handler processing this since a mailbox command
* will need to be sent to ACK the request.
*/
@@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
/* We are being asked by firmware to accept
* a change to the port. This is only
* a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode.
+ * parameters, or loopback mode.
*/
case AEN_IDC_REQ:
status = ql_idc_req_aen(qdev);
@@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
/* Process and inbound IDC event.
* This will happen when we're trying to
* change tx/rx max frame size, change pause
- * paramters or loopback mode.
+ * parameters or loopback mode.
*/
case AEN_IDC_CMPLT:
case AEN_IDC_EXT:
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff589988d1..2976757a36f 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
-#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
#define SMT_RDF_RANGE 0x8 /* out of range */
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
#define SMT_RDF_LENGTH 0x0a /* length error */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 534c0f38483..0337b9d673f 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
MODULE_FIRMWARE(FW_NAME);
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 2e70ee8f145..46a2cc92d97 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -169,7 +169,7 @@ static char *open_min_error[] = {
"Monitor Contention failer for RPL", "FDX Protocol Error"
};
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d068a9d3688..2d819fc8558 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
"Reserved", "Reserved", "No Monitor Detected for RPL",
"Monitor Contention failer for RPL", "FDX Protocol Error"};
-/* Module paramters */
+/* Module parameters */
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6fcb500257b..61fe80dda3e 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
*
* Limitation:
* Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f3a2fce6166..47f68cfa7e2 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -398,7 +398,7 @@ static void rx_complete (struct urb *urb)
/* stalls need manual reset. this is rare ... except that
* when going through USB 2.0 TTs, unplug appears this way.
- * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+ * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
* storm, recovering as needed.
*/
case -EPIPE:
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 3d94e7dfea6..3359497012a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -310,7 +310,7 @@ config PRISM54
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called prism54.ko.
+ The module will be called prism54.
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207bce2..c15db229351 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
PLX/PCI/CS version of the driver to actually use the driver.
The driver can be compiled as a module and it will be called
- "hostap.ko".
+ hostap.
config HOSTAP_FIRMWARE
bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
driver.
The driver can be compiled as a module and will be named
- "hostap_plx.ko".
+ hostap_plx.
config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
driver.
The driver can be compiled as a module and will be named
- "hostap_pci.ko".
+ hostap_pci.
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
driver.
The driver can be compiled as a module and will be named
- "hostap_cs.ko".
+ hostap_cs.
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f6406a1..736162324ba 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -75,7 +75,7 @@ config IWLAGN
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwlagn.ko.
+ module will be called iwlagn.
config IWL4965
@@ -113,7 +113,7 @@ config IWL3945
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl3945.ko.
+ module will be called iwl3945.
config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index bebf735cd4b..ff0042ffe3e 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -584,7 +584,7 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
ret = rndis_set_oid(dev, OID_GEN_RNDIS_CONFIG_PARAMETER,
infobuf, info_len);
if (ret != 0)
- devdbg(dev, "setting rndis config paramater failed, %d.", ret);
+ devdbg(dev, "setting rndis config parameter failed, %d.", ret);
kfree(infobuf);
return ret;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..1ae11c7f17a 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
- a module) will be called "rt2x00lib.ko".
+ a module) will be called rt2x00lib.
Additionally PCI and USB libraries will also be build depending
on the types of drivers being selected, these libraries will be
- called "rt2x00pci.ko" and "rt2x00usb.ko".
+ called rt2x00pci and rt2x00usb.
if RT2X00
@@ -26,7 +26,7 @@ config RT2400PCI
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
- When compiled as a module, this driver will be called "rt2400pci.ko".
+ When compiled as a module, this driver will be called rt2400pci.
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
- When compiled as a module, this driver will be called "rt2500pci.ko".
+ When compiled as a module, this driver will be called rt2500pci.
config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
- When compiled as a module, this driver will be called "rt61pci.ko".
+ When compiled as a module, this driver will be called rt61pci.
config RT2500USB
tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
- When compiled as a module, this driver will be called "rt2500usb.ko".
+ When compiled as a module, this driver will be called rt2500usb.
config RT73USB
tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,7 @@ config RT73USB
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
- When compiled as a module, this driver will be called "rt73usb.ko".
+ When compiled as a module, this driver will be called rt73usb.
config RT2X00_LIB_PCI
tristate
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d..d83e3794d34 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -235,7 +235,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* Initialize work structure and all link tuning related
- * paramters. This will not start the link tuning process itself.
+ * parameters. This will not start the link tuning process itself.
*/
void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e55b33961ae..fa2821be44c 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -138,7 +138,7 @@ psa_read(struct net_device * dev,
/*------------------------------------------------------------------*/
/*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 09:43:17 +0000