diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/Kconfig | 4 | ||||
-rw-r--r-- | drivers/net/cassini.c | 4 | ||||
-rw-r--r-- | drivers/net/fec.c | 2 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/phy.c | 4 | ||||
-rw-r--r-- | drivers/net/igb/e1000_82575.c | 11 | ||||
-rw-r--r-- | drivers/net/igb/igb.h | 9 | ||||
-rw-r--r-- | drivers/net/igb/igb_main.c | 24 | ||||
-rw-r--r-- | drivers/net/ps3_gelic_wireless.c | 2 | ||||
-rw-r--r-- | drivers/net/qlge/qlge.h | 10 | ||||
-rw-r--r-- | drivers/net/qlge/qlge_main.c | 25 | ||||
-rw-r--r-- | drivers/net/smc911x.c | 4 | ||||
-rw-r--r-- | drivers/net/smsc9420.c | 12 | ||||
-rw-r--r-- | drivers/net/sungem.c | 2 | ||||
-rw-r--r-- | drivers/net/sungem_phy.c | 2 | ||||
-rw-r--r-- | drivers/net/sunqe.c | 2 | ||||
-rw-r--r-- | drivers/net/tsi108_eth.c | 2 | ||||
-rw-r--r-- | drivers/net/tulip/de2104x.c | 2 |
17 files changed, 68 insertions, 53 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0ec01e42e9b..49f4d50abc5 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1828,8 +1828,8 @@ config 68360_ENET the Motorola 68360 processor. config FEC - bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x || MACH_MX27 + bool "FEC ethernet controller (of ColdFire CPUs)" + depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index bb46be27533..0effefa1b88 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -806,7 +806,7 @@ static int cas_reset_mii_phy(struct cas *cp) cas_phy_write(cp, MII_BMCR, BMCR_RESET); udelay(100); - while (limit--) { + while (--limit) { val = cas_phy_read(cp, MII_BMCR); if ((val & BMCR_RESET) == 0) break; @@ -979,7 +979,7 @@ static void cas_phy_init(struct cas *cp) writel(val, cp->regs + REG_PCS_MII_CTRL); limit = STOP_TRIES; - while (limit-- > 0) { + while (--limit > 0) { udelay(10); if ((readl(cp->regs + REG_PCS_MII_CTRL) & PCS_MII_RESET) == 0) diff --git a/drivers/net/fec.c b/drivers/net/fec.c index ea23baaf025..fe2650237e3 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1675,7 +1675,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva /* * Set MII speed to 2.5 MHz */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; + fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2; fecp->fec_mii_speed = fep->phy_speed; fec_restart(dev, 0); diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c index c40cd8df221..ac9d964e59e 100644 --- a/drivers/net/ibm_newemac/phy.c +++ b/drivers/net/ibm_newemac/phy.c @@ -60,7 +60,7 @@ int emac_mii_reset_phy(struct mii_phy *phy) udelay(300); - while (limit--) { + while (--limit) { val = phy_read(phy, MII_BMCR); if (val >= 0 && (val & BMCR_RESET) == 0) break; @@ -84,7 +84,7 @@ int emac_mii_reset_gpcs(struct mii_phy *phy) udelay(300); - while (limit--) { + while (--limit) { val = gpcs_phy_read(phy, MII_BMCR); if (val >= 0 && (val & BMCR_RESET) == 0) break; diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 9b367ba8e26..f5e4cad7971 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 7d8c8873915..30657ddf484 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -284,11 +284,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index cd794bac8b8..8b80fe34343 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -203,10 +203,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1153,11 +1154,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1306,8 +1306,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -1819,11 +1818,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1849,7 +1848,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; @@ -3442,19 +3441,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3471,7 +3467,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 708ae067c33..a5ac2bd58b5 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl, complete(&wl->assoc_done); netif_carrier_on(port_to_netdev(wl_port(wl))); } else - pr_debug("%s: event %#lx under wpa\n", + pr_debug("%s: event %#llx under wpa\n", __func__, event); } diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index c1dadadfab1..e6fdce9206c 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -787,12 +787,12 @@ struct mbox_params { struct flash_params { u8 dev_id_str[4]; - u16 size; - u16 csum; - u16 ver; - u16 sub_dev_id; + __le16 size; + __le16 csum; + __le16 ver; + __le16 sub_dev_id; u8 mac_addr[6]; - u16 res; + __le16 res; }; diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 4ab6e72ea95..04bf2122264 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -641,7 +641,7 @@ static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev) } -static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) +static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data) { int status = 0; /* wait for reg to come ready */ @@ -656,8 +656,11 @@ static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); if (status) goto exit; - /* get the data */ - *data = ql_read32(qdev, FLASH_DATA); + /* This data is stored on flash as an array of + * __le32. Since ql_read32() returns cpu endian + * we need to swap it back. + */ + *data = cpu_to_le32(ql_read32(qdev, FLASH_DATA)); exit: return status; } @@ -666,13 +669,20 @@ static int ql_get_flash_params(struct ql_adapter *qdev) { int i; int status; - u32 *p = (u32 *)&qdev->flash; + __le32 *p = (__le32 *)&qdev->flash; + u32 offset = 0; + + /* Second function's parameters follow the first + * function's. + */ + if (qdev->func) + offset = sizeof(qdev->flash) / sizeof(u32); if (ql_sem_spinlock(qdev, SEM_FLASH_MASK)) return -ETIMEDOUT; for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) { - status = ql_read_flash_word(qdev, i, p); + status = ql_read_flash_word(qdev, i+offset, p); if (status) { QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n"); goto exit; @@ -3827,7 +3837,7 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); - int err; + int err, i; netif_device_detach(ndev); @@ -3837,6 +3847,9 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state) return err; } + for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) + netif_napi_del(&qdev->rx_ring[i].napi); + err = pci_save_state(pdev); if (err) return err; diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 211213c6ab5..293610334a7 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -220,9 +220,9 @@ static void smc911x_reset(struct net_device *dev) /* make sure EEPROM has finished loading before setting GPIO_CFG */ timeout=1000; - while ( timeout-- && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) { + while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) udelay(10); - } + if (timeout == 0){ PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name); return; diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index 1aa9be3975e..da8b977a535 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -498,7 +498,7 @@ static void smsc9420_check_mac_address(struct net_device *dev) static void smsc9420_stop_tx(struct smsc9420_pdata *pd) { u32 dmac_control, mac_cr, dma_intr_ena; - int timeOut = 1000; + int timeout = 1000; /* disable TX DMAC */ dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); @@ -506,13 +506,13 @@ static void smsc9420_stop_tx(struct smsc9420_pdata *pd) smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); /* Wait max 10ms for transmit process to stop */ - while (timeOut--) { + while (--timeout) { if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_) break; udelay(10); } - if (!timeOut) + if (!timeout) smsc_warn(IFDOWN, "TX DMAC failed to stop"); /* ACK Tx DMAC stop bit */ @@ -596,7 +596,7 @@ static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd) static void smsc9420_stop_rx(struct smsc9420_pdata *pd) { - int timeOut = 1000; + int timeout = 1000; u32 mac_cr, dmac_control, dma_intr_ena; /* mask RX DMAC interrupts */ @@ -617,13 +617,13 @@ static void smsc9420_stop_rx(struct smsc9420_pdata *pd) smsc9420_pci_flush_write(pd); /* wait up to 10ms for receive to stop */ - while (timeOut--) { + while (--timeout) { if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_) break; udelay(10); } - if (!timeOut) + if (!timeout) smsc_warn(IFDOWN, "RX DMAC did not stop! timeout."); /* ACK the Rx DMAC stop bit */ diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4942059109f..fc1e7f1d024 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -148,7 +148,7 @@ static u16 __phy_read(struct gem *gp, int phy_addr, int reg) cmd |= (MIF_FRAME_TAMSB); writel(cmd, gp->regs + MIF_FRAME); - while (limit--) { + while (--limit) { cmd = readl(gp->regs + MIF_FRAME); if (cmd & MIF_FRAME_TALSB) break; diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index 61843fd5752..78f8cee5fd7 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -79,7 +79,7 @@ static int reset_one_mii_phy(struct mii_phy* phy, int phy_id) udelay(100); - while (limit--) { + while (--limit) { val = __phy_read(phy, phy_id, MII_BMCR); if ((val & BMCR_RESET) == 0) break; diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c index 6e8f377355f..fe0c3f24456 100644 --- a/drivers/net/sunqe.c +++ b/drivers/net/sunqe.c @@ -227,7 +227,7 @@ static int qe_init(struct sunqe *qep, int from_irq) if (!(sbus_readb(mregs + MREGS_PHYCONFIG) & MREGS_PHYCONFIG_LTESTDIS)) { int tries = 50; - while (tries--) { + while (--tries) { u8 tmp; mdelay(5); diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 1138782e561..bb43e7fb2a5 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1237,7 +1237,7 @@ static void tsi108_init_phy(struct net_device *dev) spin_lock_irqsave(&phy_lock, flags); tsi108_write_mii(data, MII_BMCR, BMCR_RESET); - while (i--){ + while (--i) { if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET)) break; udelay(10); diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index d5d53b633cf..0bf2114738b 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -392,7 +392,7 @@ static void de_rx (struct de_private *de) unsigned drop = 0; int rc; - while (rx_work--) { + while (--rx_work) { u32 status, len; dma_addr_t mapping; struct sk_buff *skb, *copy_skb; |