diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/can/c_can/c_can_platform.c | 2 | ||||
| -rw-r--r-- | drivers/net/can/flexcan.c | 9 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/sja1000.c | 62 |
3 files changed, 43 insertions, 30 deletions
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 5dede6e6437..109cb44291f 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -280,7 +280,7 @@ static int c_can_plat_probe(struct platform_device *pdev) priv->raminit_ctrlreg = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0) + if (!priv->raminit_ctrlreg || priv->instance < 0) dev_info(&pdev->dev, "control memory is not used for raminit\n"); else priv->raminit = c_can_hw_raminit_ti; diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f425ec2c783..944aa5d3af6 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -549,6 +549,13 @@ static void do_state(struct net_device *dev, /* process state changes depending on the new state */ switch (new_state) { + case CAN_STATE_ERROR_WARNING: + netdev_dbg(dev, "Error Warning\n"); + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = (bec.txerr > bec.rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + break; case CAN_STATE_ERROR_ACTIVE: netdev_dbg(dev, "Error Active\n"); cf->can_id |= CAN_ERR_PROT; @@ -852,6 +859,8 @@ static int flexcan_chip_start(struct net_device *dev) if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE || priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) reg_ctrl |= FLEXCAN_CTRL_ERR_MSK; + else + reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK; /* save for later use */ priv->reg_ctrl_default = reg_ctrl; diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index d1692154ed1..b27ac6074af 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -172,6 +172,35 @@ static void set_normal_mode(struct net_device *dev) netdev_err(dev, "setting SJA1000 into normal mode failed!\n"); } +/* + * initialize SJA1000 chip: + * - reset chip + * - set output mode + * - set baudrate + * - enable interrupts + * - start operating mode + */ +static void chipset_init(struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + + /* set clock divider and output control register */ + priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN); + + /* set acceptance filter (accept all) */ + priv->write_reg(priv, SJA1000_ACCC0, 0x00); + priv->write_reg(priv, SJA1000_ACCC1, 0x00); + priv->write_reg(priv, SJA1000_ACCC2, 0x00); + priv->write_reg(priv, SJA1000_ACCC3, 0x00); + + priv->write_reg(priv, SJA1000_ACCM0, 0xFF); + priv->write_reg(priv, SJA1000_ACCM1, 0xFF); + priv->write_reg(priv, SJA1000_ACCM2, 0xFF); + priv->write_reg(priv, SJA1000_ACCM3, 0xFF); + + priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL); +} + static void sja1000_start(struct net_device *dev) { struct sja1000_priv *priv = netdev_priv(dev); @@ -180,6 +209,10 @@ static void sja1000_start(struct net_device *dev) if (priv->can.state != CAN_STATE_STOPPED) set_reset_mode(dev); + /* Initialize chip if uninitialized at this stage */ + if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN)) + chipset_init(dev); + /* Clear error counters and error code capture */ priv->write_reg(priv, SJA1000_TXERR, 0x0); priv->write_reg(priv, SJA1000_RXERR, 0x0); @@ -237,35 +270,6 @@ static int sja1000_get_berr_counter(const struct net_device *dev, } /* - * initialize SJA1000 chip: - * - reset chip - * - set output mode - * - set baudrate - * - enable interrupts - * - start operating mode - */ -static void chipset_init(struct net_device *dev) -{ - struct sja1000_priv *priv = netdev_priv(dev); - - /* set clock divider and output control register */ - priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN); - - /* set acceptance filter (accept all) */ - priv->write_reg(priv, SJA1000_ACCC0, 0x00); - priv->write_reg(priv, SJA1000_ACCC1, 0x00); - priv->write_reg(priv, SJA1000_ACCC2, 0x00); - priv->write_reg(priv, SJA1000_ACCC3, 0x00); - - priv->write_reg(priv, SJA1000_ACCM0, 0xFF); - priv->write_reg(priv, SJA1000_ACCM1, 0xFF); - priv->write_reg(priv, SJA1000_ACCM2, 0xFF); - priv->write_reg(priv, SJA1000_ACCM3, 0xFF); - - priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL); -} - -/* * transmit a CAN message * message layout in the sk_buff should be like this: * xx xx xx xx ff ll 00 11 22 33 44 55 66 77 |