diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/sfc/ethtool.c | 52 | ||||
| -rw-r--r-- | drivers/net/sfc/falcon.c | 358 | ||||
| -rw-r--r-- | drivers/net/sfc/falcon_hwdefs.h | 35 | ||||
| -rw-r--r-- | drivers/net/sfc/net_driver.h | 7 | ||||
| -rw-r--r-- | drivers/net/sfc/spi.h | 89 |
5 files changed, 446 insertions, 95 deletions
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 6142c3a394b..72a2eb2e3a1 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -17,6 +17,7 @@ #include "ethtool.h" #include "falcon.h" #include "gmii.h" +#include "spi.h" #include "mac.h" const char *efx_loopback_mode_names[] = { @@ -171,6 +172,11 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* Number of ethtool statistics */ #define EFX_ETHTOOL_NUM_STATS ARRAY_SIZE(efx_ethtool_stats) +/* EEPROM range with gPXE configuration */ +#define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB +#define EFX_ETHTOOL_EEPROM_MIN 0x100U +#define EFX_ETHTOOL_EEPROM_MAX 0x400U + /************************************************************************** * * Ethtool operations @@ -532,6 +538,49 @@ static u32 efx_ethtool_get_link(struct net_device *net_dev) return efx->link_up; } +static int efx_ethtool_get_eeprom_len(struct net_device *net_dev) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_spi_device *spi = efx->spi_eeprom; + + if (!spi) + return 0; + return min(spi->size, EFX_ETHTOOL_EEPROM_MAX) - + min(spi->size, EFX_ETHTOOL_EEPROM_MIN); +} + +static int efx_ethtool_get_eeprom(struct net_device *net_dev, + struct ethtool_eeprom *eeprom, u8 *buf) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_spi_device *spi = efx->spi_eeprom; + size_t len; + int rc; + + rc = falcon_spi_read(spi, eeprom->offset + EFX_ETHTOOL_EEPROM_MIN, + eeprom->len, &len, buf); + eeprom->magic = EFX_ETHTOOL_EEPROM_MAGIC; + eeprom->len = len; + return rc; +} + +static int efx_ethtool_set_eeprom(struct net_device *net_dev, + struct ethtool_eeprom *eeprom, u8 *buf) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_spi_device *spi = efx->spi_eeprom; + size_t len; + int rc; + + if (eeprom->magic != EFX_ETHTOOL_EEPROM_MAGIC) + return -EINVAL; + + rc = falcon_spi_write(spi, eeprom->offset + EFX_ETHTOOL_EEPROM_MIN, + eeprom->len, &len, buf); + eeprom->len = len; + return rc; +} + static int efx_ethtool_get_coalesce(struct net_device *net_dev, struct ethtool_coalesce *coalesce) { @@ -653,6 +702,9 @@ struct ethtool_ops efx_ethtool_ops = { .get_drvinfo = efx_ethtool_get_drvinfo, .nway_reset = efx_ethtool_nway_reset, .get_link = efx_ethtool_get_link, + .get_eeprom_len = efx_ethtool_get_eeprom_len, + .get_eeprom = efx_ethtool_get_eeprom, + .set_eeprom = efx_ethtool_set_eeprom, .get_coalesce = efx_ethtool_get_coalesce, .set_coalesce = efx_ethtool_set_coalesce, .get_pauseparam = efx_ethtool_get_pauseparam, diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 9a13e5c8c9f..30176390481 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1620,64 +1620,195 @@ void falcon_fini_interrupt(struct efx_nic *efx) /* Wait for SPI command completion */ static int falcon_spi_wait(struct efx_nic *efx) { + unsigned long timeout = jiffies + DIV_ROUND_UP(HZ, 10); efx_oword_t reg; - int cmd_en, timer_active; - int count; + bool cmd_en, timer_active; - count = 0; - do { + for (;;) { falcon_read(efx, ®, EE_SPI_HCMD_REG_KER); cmd_en = EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN); timer_active = EFX_OWORD_FIELD(reg, EE_WR_TIMER_ACTIVE); if (!cmd_en && !timer_active) return 0; - udelay(10); - } while (++count < 10000); /* wait upto 100msec */ - EFX_ERR(efx, "timed out waiting for SPI\n"); - return -ETIMEDOUT; + if (time_after_eq(jiffies, timeout)) { + EFX_ERR(efx, "timed out waiting for SPI\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } } -static int -falcon_spi_read(struct efx_nic *efx, int device_id, unsigned int command, - unsigned int address, unsigned int addr_len, - void *data, unsigned int len) +static int falcon_spi_cmd(const struct efx_spi_device *spi, + unsigned int command, int address, + const void *in, void *out, unsigned int len) { + struct efx_nic *efx = spi->efx; + bool addressed = (address >= 0); + bool reading = (out != NULL); efx_oword_t reg; int rc; - BUG_ON(len > FALCON_SPI_MAX_LEN); + /* Input validation */ + if (len > FALCON_SPI_MAX_LEN) + return -EINVAL; /* Check SPI not currently being accessed */ rc = falcon_spi_wait(efx); if (rc) return rc; - /* Program address register */ - EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address); - falcon_write(efx, ®, EE_SPI_HADR_REG_KER); + /* Program address register, if we have an address */ + if (addressed) { + EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address); + falcon_write(efx, ®, EE_SPI_HADR_REG_KER); + } + + /* Program data register, if we have data */ + if (in != NULL) { + memcpy(®, in, len); + falcon_write(efx, ®, EE_SPI_HDATA_REG_KER); + } - /* Issue read command */ + /* Issue read/write command */ EFX_POPULATE_OWORD_7(reg, EE_SPI_HCMD_CMD_EN, 1, - EE_SPI_HCMD_SF_SEL, device_id, + EE_SPI_HCMD_SF_SEL, spi->device_id, EE_SPI_HCMD_DABCNT, len, - EE_SPI_HCMD_READ, EE_SPI_READ, + EE_SPI_HCMD_READ, reading, EE_SPI_HCMD_DUBCNT, 0, - EE_SPI_HCMD_ADBCNT, addr_len, + EE_SPI_HCMD_ADBCNT, + (addressed ? spi->addr_len : 0), EE_SPI_HCMD_ENC, command); falcon_write(efx, ®, EE_SPI_HCMD_REG_KER); - /* Wait for read to complete */ + /* Wait for read/write to complete */ rc = falcon_spi_wait(efx); if (rc) return rc; /* Read data */ - falcon_read(efx, ®, EE_SPI_HDATA_REG_KER); - memcpy(data, ®, len); + if (out != NULL) { + falcon_read(efx, ®, EE_SPI_HDATA_REG_KER); + memcpy(out, ®, len); + } + return 0; } +static unsigned int +falcon_spi_write_limit(const struct efx_spi_device *spi, unsigned int start) +{ + return min(FALCON_SPI_MAX_LEN, + (spi->block_size - (start & (spi->block_size - 1)))); +} + +static inline u8 +efx_spi_munge_command(const struct efx_spi_device *spi, + const u8 command, const unsigned int address) +{ + return command | (((address >> 8) & spi->munge_address) << 3); +} + + +static int falcon_spi_fast_wait(const struct efx_spi_device *spi) +{ + u8 status; + int i, rc; + + /* Wait up to 1000us for flash/EEPROM to finish a fast operation. */ + for (i = 0; i < 50; i++) { + udelay(20); + + rc = falcon_spi_cmd(spi, SPI_RDSR, -1, NULL, + &status, sizeof(status)); + if (rc) + return rc; + if (!(status & SPI_STATUS_NRDY)) + return 0; + } + EFX_ERR(spi->efx, + "timed out waiting for device %d last status=0x%02x\n", + spi->device_id, status); + return -ETIMEDOUT; +} + +int falcon_spi_read(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, u8 *buffer) +{ + unsigned int command, block_len, pos = 0; + int rc = 0; + + while (pos < len) { + block_len = min((unsigned int)len - pos, + FALCON_SPI_MAX_LEN); + + command = efx_spi_munge_command(spi, SPI_READ, start + pos); + rc = falcon_spi_cmd(spi, command, start + pos, NULL, + buffer + pos, block_len); + if (rc) + break; + pos += block_len; + + /* Avoid locking up the system */ + cond_resched(); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + } + + if (retlen) + *retlen = pos; + return rc; +} + +int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, const u8 *buffer) +{ + u8 verify_buffer[FALCON_SPI_MAX_LEN]; + unsigned int command, block_len, pos = 0; + int rc = 0; + + while (pos < len) { + rc = falcon_spi_cmd(spi, SPI_WREN, -1, NULL, NULL, 0); + if (rc) + break; + + block_len = min((unsigned int)len - pos, + falcon_spi_write_limit(spi, start + pos)); + command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); + rc = falcon_spi_cmd(spi, command, start + pos, + buffer + pos, NULL, block_len); + if (rc) + break; + + rc = falcon_spi_fast_wait(spi); + if (rc) + break; + + command = efx_spi_munge_command(spi, SPI_READ, start + pos); + rc = falcon_spi_cmd(spi, command, start + pos, + NULL, verify_buffer, block_len); + if (memcmp(verify_buffer, buffer + pos, block_len)) { + rc = -EIO; + break; + } + + pos += block_len; + + /* Avoid locking up the system */ + cond_resched(); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + } + + if (retlen) + *retlen = pos; + return rc; +} + /************************************************************************** * * MAC wrapper @@ -2251,40 +2382,66 @@ static int falcon_reset_sram(struct efx_nic *efx) return -ETIMEDOUT; } +static int falcon_spi_device_init(struct efx_nic *efx, + struct efx_spi_device **spi_device_ret, + unsigned int device_id, u32 device_type) +{ + struct efx_spi_device *spi_device; + + if (device_type != 0) { + spi_device = kmalloc(sizeof(*spi_device), GFP_KERNEL); + if (!spi_device) + return -ENOMEM; + spi_device->device_id = device_id; + spi_device->size = + 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE); + spi_device->addr_len = + SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); + spi_device->munge_address = (spi_device->size == 1 << 9 && + spi_device->addr_len == 1); + spi_device->block_size = + 1 << SPI_DEV_TYPE_FIELD(device_type, + SPI_DEV_TYPE_BLOCK_SIZE); + + spi_device->efx = efx; + } else { + spi_device = NULL; + } + + kfree(*spi_device_ret); + *spi_device_ret = spi_device; + return 0; +} + + +static void falcon_remove_spi_devices(struct efx_nic *efx) +{ + kfree(efx->spi_eeprom); + efx->spi_eeprom = NULL; + kfree(efx->spi_flash); + efx->spi_flash = NULL; +} + /* Extract non-volatile configuration */ static int falcon_probe_nvconfig(struct efx_nic *efx) { struct falcon_nvconfig *nvconfig; - efx_oword_t nic_stat; - int device_id; - unsigned addr_len; - size_t offset, len; + struct efx_spi_device *spi; int magic_num, struct_ver, board_rev; int rc; - /* Find the boot device. */ - falcon_read(efx, &nic_stat, NIC_STAT_REG); - if (EFX_OWORD_FIELD(nic_stat, SF_PRST)) { - device_id = EE_SPI_FLASH; - addr_len = 3; - } else if (EFX_OWORD_FIELD(nic_stat, EE_PRST)) { - device_id = EE_SPI_EEPROM; - addr_len = 2; - } else { - return -ENODEV; - } - nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); + if (!nvconfig) + return -ENOMEM; /* Read the whole configuration structure into memory. */ - for (offset = 0; offset < sizeof(*nvconfig); offset += len) { - len = min(sizeof(*nvconfig) - offset, - (size_t) FALCON_SPI_MAX_LEN); - rc = falcon_spi_read(efx, device_id, SPI_READ, - NVCONFIG_BASE + offset, addr_len, - (char *)nvconfig + offset, len); - if (rc) - goto out; + spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; + rc = falcon_spi_read(spi, NVCONFIG_BASE, sizeof(*nvconfig), + NULL, (char *)nvconfig); + if (rc) { + EFX_ERR(efx, "Failed to read %s\n", efx->spi_flash ? "flash" : + "EEPROM"); + goto fail1; } /* Read the MAC addresses */ @@ -2302,17 +2459,38 @@ static int falcon_probe_nvconfig(struct efx_nic *efx) board_rev = 0; } else { struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2; + struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3; efx->phy_type = v2->port0_phy_type; efx->mii.phy_id = v2->port0_phy_addr; board_rev = le16_to_cpu(v2->board_revision); + + if (struct_ver >= 3) { + __le32 fl = v3->spi_device_type[EE_SPI_FLASH]; + __le32 ee = v3->spi_device_type[EE_SPI_EEPROM]; + rc = falcon_spi_device_init(efx, &efx->spi_flash, + EE_SPI_FLASH, + le32_to_cpu(fl)); + if (rc) + goto fail2; + rc = falcon_spi_device_init(efx, &efx->spi_eeprom, + EE_SPI_EEPROM, + le32_to_cpu(ee)); + if (rc) + goto fail2; + } } EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mii.phy_id); efx_set_board_info(efx, board_rev); - out: + kfree(nvconfig); + return 0; + + fail2: + falcon_remove_spi_devices(efx); + fail1: kfree(nvconfig); return rc; } @@ -2363,6 +2541,86 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) return 0; } +/* Probe all SPI devices on the NIC */ +static void falcon_probe_spi_devices(struct efx_nic *efx) +{ + efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; + bool has_flash, has_eeprom, boot_is_external; + + falcon_read(efx, &gpio_ctl, GPIO_CTL_REG_KER); + falcon_read(efx, &nic_stat, NIC_STAT_REG); + falcon_read(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); + + has_flash = EFX_OWORD_FIELD(nic_stat, SF_PRST); + has_eeprom = EFX_OWORD_FIELD(nic_stat, EE_PRST); + boot_is_external = EFX_OWORD_FIELD(gpio_ctl, BOOTED_USING_NVDEVICE); + + if (has_flash) { + /* Default flash SPI device: Atmel AT25F1024 + * 128 KB, 24-bit address, 32 KB erase block, + * 256 B write block + */ + u32 flash_device_type = + (17 << SPI_DEV_TYPE_SIZE_LBN) + | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) + | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) + | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); + + falcon_spi_device_init(efx, &efx->spi_flash, + EE_SPI_FLASH, flash_device_type); + + if (!boot_is_external) { + /* Disable VPD and set clock dividers to safe + * values for initial programming. + */ + EFX_LOG(efx, "Booted from internal ASIC settings;" + " setting SPI config\n"); + EFX_POPULATE_OWORD_3(ee_vpd_cfg, EE_VPD_EN, 0, + /* 125 MHz / 7 ~= 20 MHz */ + EE_SF_CLOCK_DIV, 7, + /* 125 MHz / 63 ~= 2 MHz */ + EE_EE_CLOCK_DIV, 63); + falcon_write(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); + } + } + + if (has_eeprom) { + u32 eeprom_device_type; + + /* If it has no flash, it must have a large EEPROM + * for chip config; otherwise check whether 9-bit + * addressing is used for VPD configuration + */ + if (has_flash && + (!boot_is_external || + EFX_OWORD_FIELD(ee_vpd_cfg, EE_VPD_EN_AD9_MODE))) { + /* Default SPI device: Atmel AT25040 or similar + * 512 B, 9-bit address, 8 B write block + */ + eeprom_device_type = + (9 << SPI_DEV_TYPE_SIZE_LBN) + | (1 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (3 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); + } else { + /* "Large" SPI device: Atmel AT25640 or similar + * 8 KB, 16-bit address, 32 B write block + */ + eeprom_device_type = + (13 << SPI_DEV_TYPE_SIZE_LBN) + | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); + } + + falcon_spi_device_init(efx, &efx->spi_eeprom, + EE_SPI_EEPROM, eeprom_device_type); + } + + EFX_LOG(efx, "flash is %s, EEPROM is %s\n", + (has_flash ? "present" : "absent"), + (has_eeprom ? "present" : "absent")); +} + int falcon_probe_nic(struct efx_nic *efx) { struct falcon_nic_data *nic_data; @@ -2413,6 +2671,8 @@ int falcon_probe_nic(struct efx_nic *efx) (unsigned long long)efx->irq_status.dma_addr, efx->irq_status.addr, virt_to_phys(efx->irq_status.addr)); + falcon_probe_spi_devices(efx); + /* Read in the non-volatile configuration */ rc = falcon_probe_nvconfig(efx); if (rc) @@ -2432,6 +2692,7 @@ int falcon_probe_nic(struct efx_nic *efx) return 0; fail5: + falcon_remove_spi_devices(efx); falcon_free_buffer(efx, &efx->irq_status); fail4: fail3: @@ -2608,6 +2869,7 @@ void falcon_remove_nic(struct efx_nic *efx) rc = i2c_del_adapter(&efx->i2c_adap); BUG_ON(rc); + falcon_remove_spi_devices(efx); falcon_free_buffer(efx, &efx->irq_status); falcon_reset_hw(efx, RESET_TYPE_ALL); diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h index 6d003114eea..626735e7342 100644 --- a/drivers/net/sfc/falcon_hwdefs.h +++ b/drivers/net/sfc/falcon_hwdefs.h @@ -92,6 +92,17 @@ /* SPI host data register */ #define EE_SPI_HDATA_REG_KER 0x0120 +/* SPI/VPD config register */ +#define EE_VPD_CFG_REG_KER 0x0140 +#define EE_VPD_EN_LBN 0 +#define EE_VPD_EN_WIDTH 1 +#define EE_VPD_EN_AD9_MODE_LBN 1 +#define EE_VPD_EN_AD9_MODE_WIDTH 1 +#define EE_EE_CLOCK_DIV_LBN 112 +#define EE_EE_CLOCK_DIV_WIDTH 7 +#define EE_SF_CLOCK_DIV_LBN 120 +#define EE_SF_CLOCK_DIV_WIDTH 7 + /* PCIE CORE ACCESS REG */ #define PCIE_CORE_ADDR_PCIE_DEVICE_CTRL_STAT 0x68 #define PCIE_CORE_ADDR_PCIE_LINK_CTRL_STAT 0x70 @@ -115,6 +126,9 @@ #define STRAP_PCIE_LBN 0 #define STRAP_PCIE_WIDTH 1 +#define BOOTED_USING_NVDEVICE_LBN 3 +#define BOOTED_USING_NVDEVICE_WIDTH 1 + /* GPIO control register */ #define GPIO_CTL_REG_KER 0x0210 #define GPIO_OUTPUTS_LBN (16) @@ -1127,6 +1141,25 @@ struct falcon_nvconfig_board_v2 { __le16 board_revision; } __packed; +/* Board configuration v3 extra information */ +struct falcon_nvconfig_board_v3 { + __le32 spi_device_type[2]; +} __packed; + +/* Bit numbers for spi_device_type */ +#define SPI_DEV_TYPE_SIZE_LBN 0 +#define SPI_DEV_TYPE_SIZE_WIDTH 5 +#define SPI_DEV_TYPE_ADDR_LEN_LBN 6 +#define SPI_DEV_TYPE_ADDR_LEN_WIDTH 2 +#define SPI_DEV_TYPE_ERASE_CMD_LBN 8 +#define SPI_DEV_TYPE_ERASE_CMD_WIDTH 8 +#define SPI_DEV_TYPE_ERASE_SIZE_LBN 16 +#define SPI_DEV_TYPE_ERASE_SIZE_WIDTH 5 +#define SPI_DEV_TYPE_BLOCK_SIZE_LBN 24 +#define SPI_DEV_TYPE_BLOCK_SIZE_WIDTH 5 +#define SPI_DEV_TYPE_FIELD(type, field) \ + (((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(field)) + #define NVCONFIG_BASE 0x300 #define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C struct falcon_nvconfig { @@ -1144,6 +1177,8 @@ struct falcon_nvconfig { __le16 board_struct_ver; __le16 board_checksum; struct falcon_nvconfig_board_v2 board_v2; + efx_oword_t ee_base_page_reg; /* 0x3B0 */ + struct falcon_nvconfig_board_v3 board_v3; } __packed; #endif /* EFX_FALCON_HWDEFS_H */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 1b92186bec5..390275710ef 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -638,6 +638,10 @@ union efx_multicast_hash { * This register is written with the SMP processor ID whenever an * interrupt is handled. It is used by falcon_test_interrupt() * to verify that an interrupt has occurred. + * @spi_flash: SPI flash device + * This field will be %NULL if no flash device is present. + * @spi_eeprom: SPI EEPROM device + * This field will be %NULL if no EEPROM device is present. * @n_rx_nodesc_drop_cnt: RX no descriptor drop count * @nic_data: Hardware dependant state * @mac_lock: MAC access lock. Protects @port_enabled, efx_monitor() and @@ -709,6 +713,9 @@ struct efx_nic { struct efx_buffer irq_status; volatile signed int last_irq_cpu; + struct efx_spi_device *spi_flash; + struct efx_spi_device *spi_eeprom; + unsigned n_rx_nodesc_drop_cnt; struct falcon_nic_data *nic_data; diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h index 34412f3d41c..feef6194237 100644 --- a/drivers/net/sfc/spi.h +++ b/drivers/net/sfc/spi.h @@ -19,53 +19,48 @@ * *************************************************************************/ -/* - * Commands common to all known devices. - * +#define SPI_WRSR 0x01 /* Write status register */ +#define SPI_WRITE 0x02 /* Write data to memory array */ +#define SPI_READ 0x03 /* Read data from memory array */ +#define SPI_WRDI 0x04 /* Reset write enable latch */ +#define SPI_RDSR 0x05 /* Read status register */ +#define SPI_WREN 0x06 /* Set write enable latch */ + +#define SPI_STATUS_WPEN 0x80 /* Write-protect pin enabled */ +#define SPI_STATUS_BP2 0x10 /* Block protection bit 2 */ +#define SPI_STATUS_BP1 0x08 /* Block protection bit 1 */ +#define SPI_STATUS_BP0 0x04 /* Block protection bit 0 */ +#define SPI_STATUS_WEN 0x02 /* State of the write enable latch */ +#define SPI_STATUS_NRDY 0x01 /* Device busy flag */ + +/** + * struct efx_spi_device - an Efx SPI (Serial Peripheral Interface) device + * @efx: The Efx controller that owns this device + * @device_id: Controller's id for the device + * @size: Size (in bytes) + * @addr_len: Number of address bytes in read/write commands + * @munge_address: Flag whether addresses should be munged. + * Some devices with 9-bit addresses (e.g. AT25040A EEPROM) + * use bit 3 of the command byte as address bit A8, rather + * than having a two-byte address. If this flag is set, then + * commands should be munged in this way. + * @block_size: Write block size (in bytes). + * Write commands are limited to blocks with this size and alignment. + * @read: Read function for the device + * @write: Write function for the device */ - -/* Write status register */ -#define SPI_WRSR 0x01 - -/* Write data to memory array */ -#define SPI_WRITE 0x02 - -/* Read data from memory array */ -#define SPI_READ 0x03 - -/* Reset write enable latch */ -#define SPI_WRDI 0x04 - -/* Read status register */ -#define SPI_RDSR 0x05 - -/* Set write enable latch */ -#define SPI_WREN 0x06 - -/* SST: Enable write to status register */ -#define SPI_SST_EWSR 0x50 - -/* - * Status register bits. Not all bits are supported on all devices. - * - */ - -/* Write-protect pin enabled */ -#define SPI_STATUS_WPEN 0x80 - -/* Block protection bit 2 */ -#define SPI_STATUS_BP2 0x10 - -/* Block protection bit 1 */ -#define SPI_STATUS_BP1 0x08 - -/* Block protection bit 0 */ -#define SPI_STATUS_BP0 0x04 - -/* State of the write enable latch */ -#define SPI_STATUS_WEN 0x02 - -/* Device busy flag */ -#define SPI_STATUS_NRDY 0x01 +struct efx_spi_device { + struct efx_nic *efx; + int device_id; + unsigned int size; + unsigned int addr_len; + unsigned int munge_address:1; + unsigned int block_size; +}; + +int falcon_spi_read(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, u8 *buffer); +int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, const u8 *buffer); #endif /* EFX_SPI_H */ |