diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 55 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_hw.h | 1 |
3 files changed, 40 insertions, 17 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index b60daf43cf2..5604b3e08f3 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -706,9 +706,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) s32 ret_val; u16 speed, duplex; - /* SGMII link check is done through the PCS register. */ - if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) { + if (hw->phy.media_type != e1000_media_type_copper) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); /* @@ -723,6 +721,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) return ret_val; } + /** * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex * @hw: pointer to the HW structure @@ -788,13 +787,23 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, void igb_shutdown_serdes_link_82575(struct e1000_hw *hw) { u32 reg; + u16 eeprom_data = 0; if (hw->phy.media_type != e1000_media_type_internal_serdes || igb_sgmii_active_82575(hw)) return; - /* if the management interface is not enabled, then power down */ - if (!igb_enable_mng_pass_thru(hw)) { + if (hw->bus.func == E1000_FUNC_0) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); + else if (hw->bus.func == E1000_FUNC_1) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + + /* + * If APM is not enabled in the EEPROM and management interface is + * not enabled, then power down. + */ + if (!(eeprom_data & E1000_NVM_APME_82575) && + !igb_enable_mng_pass_thru(hw)) { /* Disable PCS to turn off link */ reg = rd32(E1000_PCS_CFG0); reg &= ~E1000_PCS_CFG_PCS_EN; @@ -1010,10 +1019,13 @@ out: } /** - * igb_setup_serdes_link_82575 - Setup link for fiber/serdes + * igb_setup_serdes_link_82575 - Setup link for serdes * @hw: pointer to the HW structure * - * Configures speed and duplex for fiber and serdes links. + * Configure the physical coding sub-layer (PCS) link. The PCS link is + * used on copper connections where the serialized gigabit media independent + * interface (sgmii), or serdes fiber is being used. Configures the link + * for auto-negotiation or forces speed/duplex. **/ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) { @@ -1086,18 +1098,27 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) */ if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) { /* Set PCS register for autoneg */ - reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ - E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ - E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ - E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full dplx */ + E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ + E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); } else { - /* Set PCS register for forced speed */ - reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ - E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ - E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ - E1000_PCS_LCTL_FSD | /* Force Speed */ - E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + /* Check for duplex first */ + if (hw->mac.forced_speed_duplex & E1000_ALL_FULL_DUPLEX) + reg |= E1000_PCS_LCTL_FDV_FULL; + + /* No need to check for 1000/full since the spec states that + * it requires autoneg to be enabled */ + /* Now set speed */ + if (hw->mac.forced_speed_duplex & E1000_ALL_100_SPEED) + reg |= E1000_PCS_LCTL_FSV_100; + + /* Force speed and force link */ + reg |= E1000_PCS_LCTL_FSD | + E1000_PCS_LCTL_FORCE_LINK | + E1000_PCS_LCTL_FLV_LINK_UP; + hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index ebd146fd4e1..7be3a0b6a05 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -167,6 +167,7 @@ struct e1000_adv_tx_context_desc { #define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */ #define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */ +#define E1000_NVM_APME_82575 0x0400 #define MAX_NUM_VFS 8 #define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 119869b1124..b1e0c0613a9 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -50,6 +50,7 @@ struct e1000_hw; #define E1000_REVISION_2 2 #define E1000_REVISION_4 4 +#define E1000_FUNC_0 0 #define E1000_FUNC_1 1 enum e1000_mac_type { |