diff options
Diffstat (limited to 'drivers/net')
63 files changed, 697 insertions, 796 deletions
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c index 5ba4bab6d43..7d15e7c6bca 100644 --- a/drivers/net/3c501.c +++ b/drivers/net/3c501.c @@ -17,7 +17,7 @@ Annapolis MD 21403 Fixed (again!) the missing interrupt locking on TX/RX shifting. - Alan Cox <Alan.Cox@linux.org> + Alan Cox <alan@lxorguk.ukuu.org.uk> Removed calls to init_etherdev since they are no longer needed, and cleaned up modularization just a bit. The driver still allows only @@ -29,16 +29,16 @@ the board. Now getting 150K/second FTP with a 3c501 card. Still playing with a TX-TX optimisation to see if we can touch 180-200K/second as seems theoretically maximum. - 19950402 Alan Cox <Alan.Cox@linux.org> + 19950402 Alan Cox <alan@lxorguk.ukuu.org.uk> Cleaned up for 2.3.x because we broke SMP now. - 20000208 Alan Cox <alan@redhat.com> + 20000208 Alan Cox <alan@lxorguk.ukuu.org.uk> Check up pass for 2.5. Nothing significant changed - 20021009 Alan Cox <alan@redhat.com> + 20021009 Alan Cox <alan@lxorguk.ukuu.org.uk> Fixed zero fill corner case - 20030104 Alan Cox <alan@redhat.com> + 20030104 Alan Cox <alan@lxorguk.ukuu.org.uk> For the avoidance of doubt the "preferred form" of this code is one which @@ -104,7 +104,7 @@ static const char version[] = - DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@redhat.com).\n"; + DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@lxorguk.ukuu.org.uk).\n"; /* * Braindamage remaining: diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c index e4e3241628d..a0f8b6e2d0a 100644 --- a/drivers/net/3c515.c +++ b/drivers/net/3c515.c @@ -18,7 +18,7 @@ 2001/11/17 - Added ethtool support (jgarzik) - 2002/10/28 - Locking updates for 2.5 (alan@redhat.com) + 2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk) */ diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e9d529442b0..1d8af334833 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2400,7 +2400,7 @@ config EHEA will be called ehea. config ENIC - tristate "E, the Cisco 10G Ethernet NIC" + tristate "Cisco 10G Ethernet NIC support" depends on PCI && INET select INET_LRO help diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index a0b4c851607..735fc947640 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -4,7 +4,7 @@ * - Jay Schulist <jschlst@samba.org> * * With more than a little help from; - * - Alan Cox <Alan.Cox@linux.org> + * - Alan Cox <alan@lxorguk.ukuu.org.uk> * * Derived from: * - skeleton.c: A network driver outline for linux. diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 455ef529cd6..bc8e2413abd 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c index 744fac0b161..5c3c05da4d9 100644 --- a/drivers/net/cxgb3/ael1002.c +++ b/drivers/net/cxgb3/ael1002.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h index 593fb643a61..e312d315a42 100644 --- a/drivers/net/cxgb3/common.h +++ b/drivers/net/cxgb3/common.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/cxgb3_ctl_defs.h b/drivers/net/cxgb3/cxgb3_ctl_defs.h index 6ad92405d9a..1d8d46eb3c9 100644 --- a/drivers/net/cxgb3/cxgb3_ctl_defs.h +++ b/drivers/net/cxgb3/cxgb3_ctl_defs.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/cxgb3_defs.h b/drivers/net/cxgb3/cxgb3_defs.h index 45e92164c26..47e53769af5 100644 --- a/drivers/net/cxgb3/cxgb3_defs.h +++ b/drivers/net/cxgb3/cxgb3_defs.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/cxgb3_ioctl.h b/drivers/net/cxgb3/cxgb3_ioctl.h index 3e8d5faec3a..b19e4376ba7 100644 --- a/drivers/net/cxgb3/cxgb3_ioctl.h +++ b/drivers/net/cxgb3/cxgb3_ioctl.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index f31985df0bb..1ace41a13ac 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c index 0f6fd63b284..265aa8a15af 100644 --- a/drivers/net/cxgb3/cxgb3_offload.c +++ b/drivers/net/cxgb3/cxgb3_offload.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h index 7a379138b5a..d514e5019df 100644 --- a/drivers/net/cxgb3/cxgb3_offload.h +++ b/drivers/net/cxgb3/cxgb3_offload.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/firmware_exports.h b/drivers/net/cxgb3/firmware_exports.h index b75ddd8777f..0d9b0e6dccf 100644 --- a/drivers/net/cxgb3/firmware_exports.h +++ b/drivers/net/cxgb3/firmware_exports.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2004-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2004-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c index b2c5314582a..4407ac9bb55 100644 --- a/drivers/net/cxgb3/l2t.c +++ b/drivers/net/cxgb3/l2t.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/cxgb3/l2t.h index 42ce65f76a8..fd3eb07e3f4 100644 --- a/drivers/net/cxgb3/l2t.h +++ b/drivers/net/cxgb3/l2t.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c index 4c4d6e877ea..3b5517b8fbd 100644 --- a/drivers/net/cxgb3/mc5.c +++ b/drivers/net/cxgb3/mc5.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 87919419b70..c6480be0bc1 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/t3_cpl.h b/drivers/net/cxgb3/t3_cpl.h index 917970ed24a..852c399a8b0 100644 --- a/drivers/net/cxgb3/t3_cpl.h +++ b/drivers/net/cxgb3/t3_cpl.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2004-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2004-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 4da5b09b9bc..968f64be374 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/t3cdev.h b/drivers/net/cxgb3/t3cdev.h index 0a21cfbd2b2..be55e9ae74d 100644 --- a/drivers/net/cxgb3/t3cdev.h +++ b/drivers/net/cxgb3/t3cdev.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2007 Chelsio Communications. All rights reserved. + * Copyright (C) 2006-2008 Chelsio Communications. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h index 29db711303b..bb8698a8675 100644 --- a/drivers/net/cxgb3/version.h +++ b/drivers/net/cxgb3/version.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -35,7 +35,7 @@ #define DRV_DESC "Chelsio T3 Network Driver" #define DRV_NAME "cxgb3" /* Driver version */ -#define DRV_VERSION "1.0-ko" +#define DRV_VERSION "1.1.0-ko" /* Firmware version */ #define FW_VERSION_MAJOR 7 diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c index 306c2dc4ab3..33f956bd6b5 100644 --- a/drivers/net/cxgb3/vsc8211.c +++ b/drivers/net/cxgb3/vsc8211.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c index ffdc0a1892b..9d7786937aa 100644 --- a/drivers/net/cxgb3/xgmac.c +++ b/drivers/net/cxgb3/xgmac.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved. + * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 795c594a4b7..b751c1b96cf 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -8,7 +8,7 @@ * * Many modifications, and currently maintained, by * Philip Blundell <philb@gnu.org> - * Added the Compaq LTE Alan Cox <alan@redhat.com> + * Added the Compaq LTE Alan Cox <alan@lxorguk.ukuu.org.uk> * Added MCA support Adam Fritzler * * Note - this driver is experimental still - it has problems on faster diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c index f3a47a87dbb..180e968dc54 100644 --- a/drivers/net/enic/enic_main.c +++ b/drivers/net/enic/enic_main.c @@ -34,6 +34,7 @@ #include <linux/ip.h> #include <linux/ipv6.h> #include <linux/tcp.h> +#include <net/ip6_checksum.h> #include "cq_enet_desc.h" #include "vnic_dev.h" diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 95e3464068d..f02764725a2 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -71,7 +71,7 @@ History: June 1st, 2000 corrected version codes, added support for the latest 2.3 changes Oct 28th, 2002 - cleaned up for the 2.5 tree <alan@redhat.com> + cleaned up for the 2.5 tree <alan@lxorguk.ukuu.org.uk> *************************************************************************/ diff --git a/drivers/net/jme.c b/drivers/net/jme.c index 156f159aafb..81c6cdc3851 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -37,6 +37,7 @@ #include <linux/tcp.h> #include <linux/udp.h> #include <linux/if_vlan.h> +#include <net/ip6_checksum.h> #include "jme.h" static int force_pseudohp = -1; diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c index 51ad3765e07..85587a6667b 100644 --- a/drivers/net/macmace.c +++ b/drivers/net/macmace.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. * * Copyright (C) 1996 Paul Mackerras. - * Copyright (C) 1998 Alan Cox <alan@redhat.com> + * Copyright (C) 1998 Alan Cox <alan@lxorguk.ukuu.org.uk> * * Modified heavily by Joshua M. Thompson based on Dave Huang's NetBSD driver * diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 7112fd5e0e1..08c4dd89607 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -355,9 +355,10 @@ static int tc574_config(struct pcmcia_device *link) for (i = j = 0; j < 0x400; j += 0x20) { link->io.BasePort1 = j ^ 0x300; i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; + if (i == 0) + break; } - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestIO, i); goto failed; } @@ -377,7 +378,7 @@ static int tc574_config(struct pcmcia_device *link) tuple.TupleDataMax = 64; tuple.TupleOffset = 0; tuple.DesiredTuple = 0x88; - if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) { + if (pcmcia_get_first_tuple(link, &tuple) == 0) { pcmcia_get_tuple_data(link, &tuple); for (i = 0; i < 3; i++) phys_addr[i] = htons(le16_to_cpu(buf[i])); diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 549a6455842..c235cdba69c 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -15,7 +15,7 @@ incorporated herein by reference. Donald Becker may be reached at becker@scyld.com - Updated for 2.5.x by Alan Cox <alan@redhat.com> + Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk> ======================================================================*/ @@ -278,9 +278,10 @@ static int tc589_config(struct pcmcia_device *link) if (multi && (j & 0x80)) continue; link->io.BasePort1 = j ^ 0x300; i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; + if (i == 0) + break; } - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestIO, i); goto failed; } @@ -295,7 +296,7 @@ static int tc589_config(struct pcmcia_device *link) /* The 3c589 has an extra EEPROM for configuration info, including the hardware address. The 3c562 puts the address in the CIS. */ tuple.DesiredTuple = 0x88; - if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) { + if (pcmcia_get_first_tuple(link, &tuple) == 0) { pcmcia_get_tuple_data(link, &tuple); for (i = 0; i < 3; i++) phys_addr[i] = htons(le16_to_cpu(buf[i])); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 52bf11b73c6..b37a498939a 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -262,7 +262,7 @@ static int try_io_port(struct pcmcia_device *link) if (link->io.NumPorts2 > 0) { /* for master/slave multifunction cards */ link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED; } } else { @@ -276,7 +276,8 @@ static int try_io_port(struct pcmcia_device *link) link->io.BasePort1 = j ^ 0x300; link->io.BasePort2 = (j ^ 0x300) + 0x10; ret = pcmcia_request_io(link, &link->io); - if (ret == CS_SUCCESS) return ret; + if (ret == 0) + return ret; } return ret; } else { @@ -284,59 +285,50 @@ static int try_io_port(struct pcmcia_device *link) } } +static int axnet_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int i; + cistpl_io_t *io = &cfg->io; + + if (cfg->index == 0 || cfg->io.nwin == 0) + return -ENODEV; + + p_dev->conf.ConfigIndex = 0x05; + /* For multifunction cards, by convention, we configure the + network function with window 0, and serial with window 1 */ + if (io->nwin > 1) { + i = (io->win[1].len > io->win[0].len); + p_dev->io.BasePort2 = io->win[1-i].base; + p_dev->io.NumPorts2 = io->win[1-i].len; + } else { + i = p_dev->io.NumPorts2 = 0; + } + p_dev->io.BasePort1 = io->win[i].base; + p_dev->io.NumPorts1 = io->win[i].len; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + return try_io_port(p_dev); + + return -ENODEV; +} + static int axnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; axnet_dev_t *info = PRIV(dev); - tuple_t tuple; - cisparse_t parse; int i, j, last_ret, last_fn; - u_short buf[64]; DECLARE_MAC_BUF(mac); DEBUG(0, "axnet_config(0x%p)\n", link); - tuple.Attributes = 0; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - /* don't trust the CIS on this; Linksys got it wrong */ link->conf.Present = 0x63; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (last_ret == CS_SUCCESS) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_io_t *io = &(parse.cftable_entry.io); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0 || - cfg->index == 0 || cfg->io.nwin == 0) - goto next_entry; - - link->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - link->io.BasePort2 = io->win[1-i].base; - link->io.NumPorts2 = io->win[1-i].len; - } else { - i = link->io.NumPorts2 = 0; - } - link->io.BasePort1 = io->win[i].base; - link->io.NumPorts1 = io->win[i].len; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) { - last_ret = try_io_port(link); - if (last_ret == CS_SUCCESS) break; - } - next_entry: - last_ret = pcmcia_get_next_tuple(link, &tuple); - } - if (last_ret != CS_SUCCESS) { + last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL); + if (last_ret != 0) { cs_error(link, RequestIO, last_ret); goto failed; } diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index ea9414c4d90..831090c7562 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -260,21 +260,21 @@ static int com20020_config(struct pcmcia_device *link) DEBUG(0, "com20020_config(0x%p)\n", link); DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1); - i = !CS_SUCCESS; + i = -ENODEV; if (!link->io.BasePort1) { for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { link->io.BasePort1 = ioaddr; i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) + if (i == 0) break; } } else i = pcmcia_request_io(link, &link->io); - if (i != CS_SUCCESS) + if (i != 0) { DEBUG(1,"arcnet: requestIO failed totally!\n"); goto failed; @@ -287,7 +287,7 @@ static int com20020_config(struct pcmcia_device *link) link->irq.AssignedIRQ, link->irq.IRQInfo1, link->irq.IRQInfo2); i = pcmcia_request_irq(link, &link->irq); - if (i != CS_SUCCESS) + if (i != 0) { DEBUG(1,"arcnet: requestIRQ failed totally!\n"); goto failed; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index a550c9bd126..69d916daa7b 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -309,7 +309,8 @@ static int mfc_try_io_port(struct pcmcia_device *link) printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n"); } ret = pcmcia_request_io(link, &link->io); - if (ret == CS_SUCCESS) return ret; + if (ret == 0) + return ret; } return ret; } @@ -325,7 +326,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { link->io.BasePort1 = ioaddr; ret = pcmcia_request_io(link, &link->io); - if (ret == CS_SUCCESS) { + if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = ((link->io.BasePort1 & 0x0f0) >> 3) | 0x22; @@ -356,12 +357,12 @@ static int fmvj18x_config(struct pcmcia_device *link) tuple.TupleOffset = 0; tuple.DesiredTuple = CISTPL_FUNCE; tuple.TupleOffset = 0; - if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) { + if (pcmcia_get_first_tuple(link, &tuple) == 0) { /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse)); link->conf.ConfigIndex = parse.cftable_entry.index; switch (link->manf_id) { case MANFID_TDK: @@ -430,10 +431,10 @@ static int fmvj18x_config(struct pcmcia_device *link) link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT; ret = mfc_try_io_port(link); - if (ret != CS_SUCCESS) goto cs_failed; + if (ret != 0) goto cs_failed; } else if (cardtype == UNGERMANN) { ret = ungermann_try_io_port(link); - if (ret != CS_SUCCESS) goto cs_failed; + if (ret != 0) goto cs_failed; } else { CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); } @@ -565,7 +566,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) req.Base = 0; req.Size = 0; req.AccessSpeed = 0; i = pcmcia_request_window(&link, &req, &link->win); - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestWindow, i); return -1; } @@ -599,7 +600,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) iounmap(base); j = pcmcia_release_window(link->win); - if (j != CS_SUCCESS) + if (j != 0) cs_error(link, ReleaseWindow, j); return (i != 0x200) ? 0 : -1; @@ -620,7 +621,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link) req.Base = 0; req.Size = 0; req.AccessSpeed = 0; i = pcmcia_request_window(&link, &req, &link->win); - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestWindow, i); return -1; } @@ -642,7 +643,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link) iounmap(base); j = pcmcia_release_window(link->win); - if (j != CS_SUCCESS) + if (j != 0) cs_error(link, ReleaseWindow, j); return 0; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index 4eafa4f42cf..cf3cca4642f 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -238,7 +238,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) /* Try PRIMARY card at 0xA20-0xA23 */ link->io.BasePort1 = 0xA20; i = pcmcia_request_io(link, &link->io); - if (i != CS_SUCCESS) { + if (i != 0) { /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ link->io.BasePort1 = 0xA24; CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index cfcbea9b7e2..448cd40aeba 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -69,7 +69,7 @@ Driver Notes and Issues History ------------------------------------------------------------------------------- Log: nmclan_cs.c,v - * 2.5.75-ac1 2003/07/11 Alan Cox <alan@redhat.com> + * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk> * Fixed hang on card eject as we probe it * Cleaned up to use new style locking. * @@ -925,7 +925,7 @@ static void mace_tx_timeout(struct net_device *dev) printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name); #if RESET_ON_TIMEOUT printk("resetting card\n"); - pcmcia_reset_card(link, NULL); + pcmcia_reset_card(link->socket); #else /* #if RESET_ON_TIMEOUT */ printk("NOT resetting card\n"); #endif /* #if RESET_ON_TIMEOUT */ diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index ebc1ae6bcbe..e40d6301aa7 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -310,7 +310,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) req.Base = 0; req.Size = 0; req.AccessSpeed = 0; i = pcmcia_request_window(&link, &req, &link->win); - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestWindow, i); return NULL; } @@ -333,7 +333,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) iounmap(virt); j = pcmcia_release_window(link->win); - if (j != CS_SUCCESS) + if (j != 0) cs_error(link, ReleaseWindow, j); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ @@ -504,7 +504,8 @@ static int try_io_port(struct pcmcia_device *link) link->io.BasePort1 = j ^ 0x300; link->io.BasePort2 = (j ^ 0x300) + 0x10; ret = pcmcia_request_io(link, &link->io); - if (ret == CS_SUCCESS) return ret; + if (ret == 0) + return ret; } return ret; } else { @@ -512,58 +513,53 @@ static int try_io_port(struct pcmcia_device *link) } } +static int pcnet_confcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int *has_shmem = priv_data; + int i; + cistpl_io_t *io = &cfg->io; + + if (cfg->index == 0 || cfg->io.nwin == 0) + return -EINVAL; + + /* For multifunction cards, by convention, we configure the + network function with window 0, and serial with window 1 */ + if (io->nwin > 1) { + i = (io->win[1].len > io->win[0].len); + p_dev->io.BasePort2 = io->win[1-i].base; + p_dev->io.NumPorts2 = io->win[1-i].len; + } else { + i = p_dev->io.NumPorts2 = 0; + } + + *has_shmem = ((cfg->mem.nwin == 1) && + (cfg->mem.win[0].len >= 0x4000)); + p_dev->io.BasePort1 = io->win[i].base; + p_dev->io.NumPorts1 = io->win[i].len; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + return try_io_port(p_dev); + + return 0; +} + static int pcnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn, start_pg, stop_pg, cm_offset; + int last_ret, last_fn, start_pg, stop_pg, cm_offset; int has_shmem = 0; - u_short buf[64]; hw_info_t *local_hw_info; DECLARE_MAC_BUF(mac); DEBUG(0, "pcnet_config(0x%p)\n", link); - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (last_ret == CS_SUCCESS) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_io_t *io = &(parse.cftable_entry.io); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0 || - cfg->index == 0 || cfg->io.nwin == 0) - goto next_entry; - - link->conf.ConfigIndex = cfg->index; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - link->io.BasePort2 = io->win[1-i].base; - link->io.NumPorts2 = io->win[1-i].len; - } else { - i = link->io.NumPorts2 = 0; - } - has_shmem = ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)); - link->io.BasePort1 = io->win[i].base; - link->io.NumPorts1 = io->win[i].len; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) { - last_ret = try_io_port(link); - if (last_ret == CS_SUCCESS) break; - } - next_entry: - last_ret = pcmcia_get_next_tuple(link, &tuple); - } - if (last_ret != CS_SUCCESS) { + last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem); + if (last_ret) { cs_error(link, RequestIO, last_ret); goto failed; } diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 250eb1954c3..c74d6656d26 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -409,10 +409,13 @@ static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, { int i; - if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS || - (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS) + i = pcmcia_get_first_tuple(handle, tuple); + if (i != 0) return i; - return pcmcia_parse_tuple(handle, tuple, parse); + i = pcmcia_get_tuple_data(handle, tuple); + if (i != 0) + return i; + return pcmcia_parse_tuple(tuple, parse); } static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, @@ -420,10 +423,10 @@ static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, { int i; - if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS || - (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS) + if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 || + (i = pcmcia_get_tuple_data(handle, tuple)) != 0) return i; - return pcmcia_parse_tuple(handle, tuple, parse); + return pcmcia_parse_tuple(tuple, parse); } /*====================================================================== @@ -459,27 +462,36 @@ static int mhz_3288_power(struct pcmcia_device *link) return 0; } +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int k; + p_dev->io.BasePort2 = cf->io.win[0].base; + for (k = 0; k < 0x400; k += 0x10) { + if (k & 0x80) + continue; + p_dev->io.BasePort1 = k ^ 0x300; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; +} + static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - u_char *buf; win_req_t req; memreq_t mem; - int i, k; + int i; cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); if (!cfg_mem) - return CS_OUT_OF_RESOURCE; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; + return -ENOMEM; link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; @@ -489,27 +501,9 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts2 = 8; - tuple->Attributes = tuple->TupleOffset = 0; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - - i = first_tuple(link, tuple, parse); /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ - while (i == CS_SUCCESS) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort2 = cf->io.win[0].base; - for (k = 0; k < 0x400; k += 0x10) { - if (k & 0x80) continue; - link->io.BasePort1 = k ^ 0x300; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - if (i == CS_SUCCESS) break; - i = next_tuple(link, tuple, parse); - } - if (i != CS_SUCCESS) + if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) goto free_cfg_mem; dev->base_addr = link->io.BasePort1; @@ -518,7 +512,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) req.Base = req.Size = 0; req.AccessSpeed = 0; i = pcmcia_request_window(&link, &req, &link->win); - if (i != CS_SUCCESS) + if (i != 0) goto free_cfg_mem; smc->base = ioremap(req.Base, req.Size); mem.CardOffset = mem.Page = 0; @@ -526,14 +520,14 @@ static int mhz_mfc_config(struct pcmcia_device *link) mem.CardOffset = link->conf.ConfigBase; i = pcmcia_map_mem_page(link->win, &mem); - if ((i == CS_SUCCESS) + if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) mhz_3288_power(link); free_cfg_mem: kfree(cfg_mem); - return i; + return -ENODEV; } static int mhz_setup(struct pcmcia_device *link) @@ -560,12 +554,12 @@ static int mhz_setup(struct pcmcia_device *link) /* Read the station address from the CIS. It is stored as the last (fourth) string in the Version 1 Version/ID tuple. */ tuple->DesiredTuple = CISTPL_VERS_1; - if (first_tuple(link, tuple, parse) != CS_SUCCESS) { + if (first_tuple(link, tuple, parse) != 0) { rc = -1; goto free_cfg_mem; } /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ - if (next_tuple(link, tuple, parse) != CS_SUCCESS) + if (next_tuple(link, tuple, parse) != 0) first_tuple(link, tuple, parse); if (parse->version_1.ns > 3) { station_addr = parse->version_1.str + parse->version_1.ofs[3]; @@ -577,11 +571,11 @@ static int mhz_setup(struct pcmcia_device *link) /* Another possibility: for the EM3288, in a special tuple */ tuple->DesiredTuple = 0x81; - if (pcmcia_get_first_tuple(link, tuple) != CS_SUCCESS) { + if (pcmcia_get_first_tuple(link, tuple) != 0) { rc = -1; goto free_cfg_mem; } - if (pcmcia_get_tuple_data(link, tuple) != CS_SUCCESS) { + if (pcmcia_get_tuple_data(link, tuple) != 0) { rc = -1; goto free_cfg_mem; } @@ -660,46 +654,27 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ +static int smc_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int smc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; - struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - u_char *buf; int i; - cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return CS_OUT_OF_RESOURCE; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; - - tuple->Attributes = tuple->TupleOffset = 0; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - link->io.NumPorts1 = 16; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if (i == CS_SUCCESS) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - i = next_tuple(link, tuple, parse); - } - if (i == CS_SUCCESS) - dev->base_addr = link->io.BasePort1; + i = pcmcia_loop_config(link, smc_configcheck, NULL); + if (!i) + dev->base_addr = link->io.BasePort1; - kfree(cfg_mem); return i; } @@ -715,7 +690,7 @@ static int smc_setup(struct pcmcia_device *link) cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); if (!cfg_mem) - return CS_OUT_OF_RESOURCE; + return -ENOMEM; tuple = &cfg_mem->tuple; parse = &cfg_mem->parse; @@ -728,12 +703,12 @@ static int smc_setup(struct pcmcia_device *link) /* Check for a LAN function extension tuple */ tuple->DesiredTuple = CISTPL_FUNCE; i = first_tuple(link, tuple, parse); - while (i == CS_SUCCESS) { + while (i == 0) { if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID) break; i = next_tuple(link, tuple, parse); } - if (i == CS_SUCCESS) { + if (i == 0) { node_id = (cistpl_lan_node_id_t *)parse->funce.data; if (node_id->nb == 6) { for (i = 0; i < 6; i++) @@ -780,9 +755,10 @@ static int osi_config(struct pcmcia_device *link) for (i = j = 0; j < 4; j++) { link->io.BasePort2 = com[j]; i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; + if (i == 0) + break; } - if (i != CS_SUCCESS) { + if (i != 0) { /* Fallback: turn off hard decode */ link->conf.ConfigIndex = 0x03; link->io.NumPorts2 = 0; @@ -815,13 +791,13 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) /* Read the station address from tuple 0x90, subtuple 0x04 */ tuple->DesiredTuple = 0x90; i = pcmcia_get_first_tuple(link, tuple); - while (i == CS_SUCCESS) { + while (i == 0) { i = pcmcia_get_tuple_data(link, tuple); - if ((i != CS_SUCCESS) || (buf[0] == 0x04)) + if ((i != 0) || (buf[0] == 0x04)) break; i = pcmcia_get_next_tuple(link, tuple); } - if (i != CS_SUCCESS) { + if (i != 0) { rc = -1; goto free_cfg_mem; } @@ -959,8 +935,11 @@ static int check_sig(struct pcmcia_device *link) ======================================================================*/ -#define CS_EXIT_TEST(ret, svc, label) \ -if (ret != CS_SUCCESS) { cs_error(link, svc, ret); goto label; } +#define CS_EXIT_TEST(ret, svc, label) \ +if (ret != 0) { \ + cs_error(link, svc, ret); \ + goto label; \ +} static int smc91c92_config(struct pcmcia_device *link) { diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index c33a3d52356..e1fd585e713 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -377,7 +377,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 && (err = pcmcia_get_tuple_data(handle, tuple)) == 0) - err = pcmcia_parse_tuple(handle, tuple, parse); + err = pcmcia_parse_tuple(tuple, parse); return err; } @@ -388,7 +388,7 @@ next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 && (err = pcmcia_get_tuple_data(handle, tuple)) == 0) - err = pcmcia_parse_tuple(handle, tuple, parse); + err = pcmcia_parse_tuple(tuple, parse); return err; } @@ -715,6 +715,47 @@ has_ce2_string(struct pcmcia_device * p_dev) return 0; } +static int +xirc2ps_config_modem(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + unsigned int ioaddr; + + if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->io.BasePort1 = ioaddr; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; +} + +static int +xirc2ps_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int *pass = priv_data; + + if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { + p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->io.BasePort1 = p_dev->io.BasePort2 + + (*pass ? (cf->index & 0x20 ? -24:8) + : (cf->index & 0x20 ? 8:-24)); + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; + +} + /**************** * xirc2ps_config() is scheduled to run after a CARD_INSERTION event * is received, to configure the PCMCIA socket, and to make the @@ -725,13 +766,12 @@ xirc2ps_config(struct pcmcia_device * link) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); + unsigned int ioaddr; tuple_t tuple; cisparse_t parse; - unsigned int ioaddr; int err, i; u_char buf[64]; cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; DECLARE_MAC_BUF(mac); local->dingo_ccr = NULL; @@ -846,19 +886,8 @@ xirc2ps_config(struct pcmcia_device * link) /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ link->io.NumPorts1 = 16; /* no Mako stuff anymore */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)) { - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->conf.ConfigIndex = cf->index ; - link->io.BasePort2 = cf->io.win[0].base; - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) - goto port_found; - } - } - } + if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) + goto port_found; } else { link->io.NumPorts1 = 18; /* We do 2 passes here: The first one uses the regular mapping and @@ -866,21 +895,9 @@ xirc2ps_config(struct pcmcia_device * link) * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ - for (pass=0; pass < 2; pass++) { - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)){ - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){ - link->conf.ConfigIndex = cf->index ; - link->io.BasePort2 = cf->io.win[0].base; - link->io.BasePort1 = link->io.BasePort2 - + (pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!(err=pcmcia_request_io(link, &link->io))) + for (pass=0; pass < 2; pass++) + if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) goto port_found; - } - } - } /* if special option: * try to configure as Ethernet only. * .... */ diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 6671e2da0d5..d0ed1ef284a 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -55,6 +55,7 @@ EXPORT_SYMBOL(mdiobus_alloc); /** * mdiobus_release - mii_bus device release callback + * @d: the target struct device that contains the mii_bus * * Description: called when the last reference to an mii_bus is * dropped, to free the underlying memory. diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 17162748005..f11e900b437 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -557,6 +557,7 @@ int genphy_restart_aneg(struct phy_device *phydev) return ctl; } +EXPORT_SYMBOL(genphy_restart_aneg); /** diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index c37ea436c91..38116f9d416 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -58,7 +58,7 @@ */ #if (PAGE_SHIFT == 12) || (PAGE_SHIFT == 13) /* 4k & 8k pages */ #define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) -#elif (PAGE_SHIFT == 16) /* 64k pages */ +#else /* all other page sizes */ #define TX_DESC_PER_OAL 0 #endif diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 297877b68c4..4b2caa6b7ac 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -39,6 +39,7 @@ #include <linux/delay.h> #include <linux/mm.h> #include <linux/vmalloc.h> +#include <net/ip6_checksum.h> #include "qlge.h" diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index ec871f64676..c41d6876136 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -29,7 +29,8 @@ * * Tigran Aivazian <tigran@sco.com>: TLan_PciProbe() now uses * new PCI BIOS interface. - * Alan Cox <alan@redhat.com>: Fixed the out of memory + * Alan Cox <alan@lxorguk.ukuu.org.uk>: + * Fixed the out of memory * handling. * * Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer! diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index fa73e6eed6b..ed50d288e49 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -25,7 +25,7 @@ * To do: * 1. Multicast support. * - * Initial 2.5 cleanup Alan Cox <alan@redhat.com> 2002/10/28 + * Initial 2.5 cleanup Alan Cox <alan@lxorguk.ukuu.org.uk> 2002/10/28 */ #include <linux/module.h> diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index f54c45049d5..124d5d690dd 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1688,6 +1688,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de) unsigned i; dw32 (ROMCmd, 0); /* Reset the pointer with a dummy write. */ + udelay(5); for (i = 0; i < 6; i++) { int value, boguscnt = 100000; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 656200472fa..8e46a513a25 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -23,7 +23,7 @@ Marcelo Tosatti <marcelo@conectiva.com.br> : Made it compile in 2.3 (device to net_device) - Alan Cox <alan@redhat.com> : + Alan Cox <alan@lxorguk.ukuu.org.uk> : Cleaned up for kernel merge. Removed the back compatibility support Reformatted, fixing spelling etc as I went @@ -49,7 +49,7 @@ support. Updated PCI resource allocation. Do not forget to unmap PCI mapped skbs. - Alan Cox <alan@redhat.com> + Alan Cox <alan@lxorguk.ukuu.org.uk> Added new PCI identifiers provided by Clear Zhang at ALi for their 1563 ethernet device. diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index ad20f96edfa..2dced383bcf 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -12,7 +12,7 @@ * Scatter gather * More testing * - * The changes are (c) Copyright 2004, Red Hat Inc. <alan@redhat.com> + * The changes are (c) Copyright 2004, Red Hat Inc. <alan@lxorguk.ukuu.org.uk> * Additional fixes and clean up: Francois Romieu * * This source has not been verified for use in safety critical systems. diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index 243bd8d918f..ccd9cd35ecb 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -18,7 +18,8 @@ * DMA now uses get_free_page as kmalloc buffers may span a 64K * boundary. * - * Modified for SMP safety and SMP locking by Alan Cox <alan@redhat.com> + * Modified for SMP safety and SMP locking by Alan Cox + * <alan@lxorguk.ukuu.org.uk> * * Performance * diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h index 4f372396c51..85b3e785d48 100644 --- a/drivers/net/wan/z85230.h +++ b/drivers/net/wan/z85230.h @@ -2,7 +2,7 @@ * Description of Z8530 Z85C30 and Z85230 communications chips * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998 Alan Cox <alan@redhat.com> + * Copyright (C) 1998 Alan Cox <alan@lxorguk.ukuu.org.uk> */ #ifndef _Z8530_H diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index fd72e427cb2..27696c20f4c 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -206,126 +206,123 @@ static void airo_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int airo_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + win_req_t *req = priv_data; + + if (cfg->index == 0) + return -ENODEV; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; + + /* + Now set up a common memory window, if needed. There is room + in the struct pcmcia_device structure for one memory window handle, + but if the base addresses need to be saved, or if multiple + windows are needed, the info should go in the private data + structure for this device. + + Note that the memory window base is a physical address, and + needs to be mapped to virtual space with ioremap() before it + is used. + */ + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + memreq_t map; + req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + req->Base = mem->win[0].host_addr; + req->Size = mem->win[0].len; + req->AccessSpeed = 0; + if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0) + return -ENODEV; + map.Page = 0; + map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(p_dev->win, &map) != 0) + return -ENODEV; + } + /* If we got this far, we're cool! */ + return 0; +} + + static int airo_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; local_info_t *dev; + win_req_t *req; int last_fn, last_ret; - u_char buf[64]; - win_req_t req; - memreq_t map; dev = link->priv; DEBUG(0, "airo_config(0x%p)\n", link); + req = kzalloc(sizeof(win_req_t), GFP_KERNEL); + if (!req) + return -ENOMEM; + + /* + * In this loop, we scan the CIS for configuration table + * entries, each of which describes a valid card + * configuration, including voltage, IO window, memory window, + * and interrupt settings. + * + * We make no assumptions about the card to be configured: we + * use just the information available in the CIS. In an ideal + * world, this would work for any PCMCIA card, but it requires + * a complete and accurate CIS. In practice, a driver usually + * "knows" most of these things without consulting the CIS, + * and most client drivers will only use the CIS to fill in + * implementation-defined details. + */ + last_ret = pcmcia_loop_config(link, airo_cs_config_check, req); + if (last_ret) + goto failed; + /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. + Allocate an interrupt line. Note that this does not assign a + handler to the interrupt, unless the 'Handler' member of the + irq structure is initialized. */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - if (cfg->index == 0) goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - - /* - Now set up a common memory window, if needed. There is room - in the struct pcmcia_device structure for one memory window handle, - but if the base addresses need to be saved, or if multiple - windows are needed, the info should go in the private data - structure for this device. - - Note that the memory window base is a physical address, and - needs to be mapped to virtual space with ioremap() before it - is used. - */ - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) - goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) - goto next_entry; - } - /* If we got this far, we're cool! */ - break; - - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } - - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ if (link->conf.Attributes & CONF_ENABLE_IRQ) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -362,14 +359,17 @@ static int airo_config(struct pcmcia_device *link) printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1); if (link->win) - printk(", mem 0x%06lx-0x%06lx", req.Base, - req.Base+req.Size-1); + printk(", mem 0x%06lx-0x%06lx", req->Base, + req->Base+req->Size-1); printk("\n"); + kfree(req); return 0; cs_failed: cs_error(link, last_fn, last_ret); + failed: airo_release(link); + kfree(req); return -ENODEV; } /* airo_config */ diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index d2388e8d179..77406245dc7 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -224,13 +224,58 @@ static int card_present(void *arg) return 0; } +static int atmel_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int atmel_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; local_info_t *dev; int last_fn, last_ret; - u_char buf[64]; struct pcmcia_device_id *did; dev = link->priv; @@ -238,11 +283,6 @@ static int atmel_config(struct pcmcia_device *link) DEBUG(0, "atmel_config(0x%p)\n", link); - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - /* In this loop, we scan the CIS for configuration table entries, each of which describes a valid card configuration, including @@ -255,66 +295,8 @@ static int atmel_config(struct pcmcia_device *link) these things without consulting the CIS, and most client drivers will only use the CIS to fill in implementation-defined details. */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - if (cfg->index == 0) goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - - /* If we got this far, we're cool! */ - break; - - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } + if (pcmcia_loop_config(link, atmel_config_check, NULL)) + goto failed; /* Allocate an interrupt line. Note that this does not assign a @@ -360,6 +342,7 @@ static int atmel_config(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); + failed: atmel_release(link); return -ENODEV; } diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index b8aa16307f7..3cfc30307a2 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -82,13 +82,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) tuple.TupleOffset = 0; res = pcmcia_get_first_tuple(dev, &tuple); - if (res != CS_SUCCESS) + if (res != 0) goto err_kfree_ssb; res = pcmcia_get_tuple_data(dev, &tuple); - if (res != CS_SUCCESS) + if (res != 0) goto err_kfree_ssb; - res = pcmcia_parse_tuple(dev, &tuple, &parse); - if (res != CS_SUCCESS) + res = pcmcia_parse_tuple(&tuple, &parse); + if (res != 0) goto err_kfree_ssb; dev->conf.ConfigBase = parse.config.base; @@ -107,13 +107,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) win.Size = SSB_CORE_SIZE; win.AccessSpeed = 250; res = pcmcia_request_window(&dev, &win, &dev->win); - if (res != CS_SUCCESS) + if (res != 0) goto err_kfree_ssb; mem.CardOffset = 0; mem.Page = 0; res = pcmcia_map_mem_page(dev->win, &mem); - if (res != CS_SUCCESS) + if (res != 0) goto err_disable; dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; @@ -121,11 +121,11 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->irq.Handler = NULL; /* The handler is registered later. */ dev->irq.Instance = NULL; res = pcmcia_request_irq(dev, &dev->irq); - if (res != CS_SUCCESS) + if (res != 0) goto err_disable; res = pcmcia_request_configuration(dev, &dev->conf); - if (res != CS_SUCCESS) + if (res != 0) goto err_disable; err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 3b4e55cf33c..63374027735 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -234,7 +234,7 @@ static void sandisk_set_iobase(local_info_t *local) reg.Value = hw_priv->link->io.BasePort1 & 0x00ff; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" " res=%d\n", res); } @@ -246,7 +246,7 @@ static void sandisk_set_iobase(local_info_t *local) reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" " res=%d\n", res); } @@ -305,7 +305,7 @@ static int sandisk_enable_wireless(struct net_device *dev) tuple.DesiredTuple = CISTPL_LONGLINK_MFC; if (pcmcia_get_first_tuple(hw_priv->link, &tuple) || pcmcia_get_tuple_data(hw_priv->link, &tuple) || - pcmcia_parse_tuple(hw_priv->link, &tuple, parse) || + pcmcia_parse_tuple(&tuple, parse) || parse->longlink_mfc.nfn < 2) { /* No multi-function links found */ ret = -ENODEV; @@ -322,7 +322,7 @@ static int sandisk_enable_wireless(struct net_device *dev) reg.Value = COR_SOFT_RESET; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", dev->name, res); goto done; @@ -339,7 +339,7 @@ static int sandisk_enable_wireless(struct net_device *dev) reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", dev->name, res); goto done; @@ -374,7 +374,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local) reg.Value = 0; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n", res); return; @@ -386,7 +386,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local) reg.Value |= COR_SOFT_RESET; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n", res); return; @@ -399,7 +399,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local) reg.Value |= COR_IREQ_ENA; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n", res); return; @@ -433,7 +433,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) reg.Value = 0; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 " "(%d)\n", res); return; @@ -446,7 +446,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) reg.Value |= COR_SOFT_RESET; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 " "(%d)\n", res); return; @@ -460,7 +460,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) reg.Offset = CISREG_CCSR; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 " "(%d)\n", res); return; @@ -472,7 +472,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) reg.Value = old_cor & ~COR_SOFT_RESET; res = pcmcia_access_configuration_register(hw_priv->link, ®); - if (res != CS_SUCCESS) { + if (res != 0) { printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 " "(%d)\n", res); return; @@ -532,145 +532,118 @@ static void prism2_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -#define CFG_CHECK2(fn, retf) \ -do { int _ret = (retf); \ -if (_ret != 0) { \ - PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \ - cs_error(link, fn, _ret); \ - goto next_entry; \ -} \ -} while (0) - /* run after a CARD_INSERTION event is received to configure the PCMCIA * socket and make the device available to the system */ + +static int prism2_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; + + PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " + "(default 0x%02X)\n", cfg->index, dflt->index); + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / + 10000 && !ignore_cis_vcc) { + PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" + " this entry\n"); + return -ENODEV; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / + 10000 && !ignore_cis_vcc) { + PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " + "- skipping this entry\n"); + return -ENODEV; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) { + /* At least Compaq WL200 does not have IRQInfo1 set, + * but it does not work without interrupts.. */ + printk(KERN_WARNING "Config has no IRQ info, but trying to " + "enable IRQ anyway..\n"); + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + } + + /* IO window settings */ + PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " + "dflt->io.nwin=%d\n", + cfg->io.nwin, dflt->io.nwin); + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " + "io.base=0x%04x, len=%d\n", io->flags, + io->win[0].base, io->win[0].len); + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & + CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int prism2_config(struct pcmcia_device *link) { struct net_device *dev; struct hostap_interface *iface; local_info_t *local; int ret = 1; - tuple_t tuple; - cisparse_t *parse; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - cistpl_cftable_entry_t dflt = { 0 }; struct hostap_cs_priv *hw_priv; PDEBUG(DEBUG_FLOW, "prism2_config()\n"); - parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL); hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); - if (parse == NULL || hw_priv == NULL) { + if (hw_priv == NULL) { ret = -ENOMEM; goto failed; } - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - /* Look for an appropriate configuration table entry in the CIS */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - for (;;) { - cistpl_cftable_entry_t *cfg = &(parse->cftable_entry); - CFG_CHECK2(GetTupleData, - pcmcia_get_tuple_data(link, &tuple)); - CFG_CHECK2(ParseTuple, - pcmcia_parse_tuple(link, &tuple, parse)); - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt.index); - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" - " this entry\n"); - goto next_entry; - } - } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " - "- skipping this entry\n"); - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) { - /* At least Compaq WL200 does not have IRQInfo1 set, - * but it does not work without interrupts.. */ - printk("Config has no IRQ info, but trying to enable " - "IRQ anyway..\n"); - link->conf.Attributes |= CONF_ENABLE_IRQ; - } - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt.io.nwin=%d\n", - cfg->io.nwin, dflt.io.nwin); - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " - "io.base=0x%04x, len=%d\n", io->flags, - io->win[0].base, io->win[0].len); - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & - CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - CFG_CHECK2(RequestIO, - pcmcia_request_io(link, &link->io)); - - /* This configuration table entry is OK */ - break; - - next_entry: - CS_CHECK(GetNextTuple, - pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, prism2_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + cs_error(link, RequestIO, last_ret); + goto failed; } /* Need to allocate net_device before requesting IRQ handler */ @@ -738,14 +711,12 @@ static int prism2_config(struct pcmcia_device *link) if (ret == 0 && local->ddev) strcpy(hw_priv->node.dev_name, local->ddev->name); } - kfree(parse); return ret; cs_failed: cs_error(link, last_fn, last_ret); failed: - kfree(parse); kfree(hw_priv); prism2_release((u_long)link); return ret; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index e3505c110af..842a08d1f10 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -791,7 +791,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 || (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 || - (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0) + (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0) { lbs_pr_err("error in pcmcia_get_first_tuple etc\n"); goto out1; diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index 25bae7933aa..a670f36b5f3 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -749,9 +749,10 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { for (i = j = 0x0; j < 0x400; j += 0x20) { link->io.BasePort1 = j ^ 0x300; i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; + if (i == 0) + break; } - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestIO, i); goto failed; } diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 9eaa252c243..e585684e59a 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -80,7 +80,7 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* We need atomic ops here, because we're not holding the lock */ set_bit(0, &card->hard_reset_in_progress); - err = pcmcia_reset_card(link, NULL); + err = pcmcia_reset_card(link->socket); if (err) return err; @@ -165,6 +165,70 @@ static void orinoco_cs_detach(struct pcmcia_device *link) last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ } while (0) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + goto next_entry; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + } + return 0; + +next_entry: + pcmcia_disable_device(p_dev); + return -ENODEV; +}; + static int orinoco_cs_config(struct pcmcia_device *link) { @@ -173,16 +237,8 @@ orinoco_cs_config(struct pcmcia_device *link) struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - tuple_t tuple; - cisparse_t parse; void __iomem *mem; - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - /* * In this loop, we scan the CIS for configuration table * entries, each of which describes a valid card @@ -197,94 +253,14 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_cftable_entry_t dflt = { .index = 0 }; - - if ( (pcmcia_get_tuple_data(link, &tuple) != 0) - || (pcmcia_parse_tuple(link, &tuple, &parse) != 0)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); - if(!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = - (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = - io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = - link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - - - /* If we got this far, we're cool! */ - - break; - - next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret == CS_NO_MORE_ITEMS) { + last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - goto cs_failed; - } + cs_error(link, RequestIO, last_ret); + goto failed; } /* @@ -335,7 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link) "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, link->irq.AssignedIRQ, link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); - return 0; cs_failed: diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 44da0d19b5c..1404a571752 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -798,9 +798,9 @@ static void ray_release(struct pcmcia_device *link) iounmap(local->amem); /* Do bother checking to see if these succeed or not */ i = pcmcia_release_window(local->amem_handle); - if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i); + if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i); i = pcmcia_release_window(local->rmem_handle); - if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i); + if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i); pcmcia_disable_device(link); DEBUG(2,"ray_release ending\n"); diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 67b26d3c3cd..b0c71c3be46 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -235,6 +235,70 @@ static void spectrum_cs_detach(struct pcmcia_device *link) * device available to the system. */ +static int spectrum_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + goto next_entry; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + } + return 0; + +next_entry: + pcmcia_disable_device(p_dev); + return -ENODEV; +}; + static int spectrum_cs_config(struct pcmcia_device *link) { @@ -243,16 +307,8 @@ spectrum_cs_config(struct pcmcia_device *link) struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - tuple_t tuple; - cisparse_t parse; void __iomem *mem; - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - /* * In this loop, we scan the CIS for configuration table * entries, each of which describes a valid card @@ -267,94 +323,14 @@ spectrum_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_cftable_entry_t dflt = { .index = 0 }; - - if ( (pcmcia_get_tuple_data(link, &tuple) != 0) - || (pcmcia_parse_tuple(link, &tuple, &parse) != 0)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); - if(!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = - (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = - io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = - link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - - - /* If we got this far, we're cool! */ - - break; - - next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret == CS_NO_MORE_ITEMS) { + last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - goto cs_failed; - } + cs_error(link, RequestIO, last_ret); + goto failed; } /* diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c index 136220b5ca8..e939a73ff79 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/net/wireless/wavelan.c @@ -4387,7 +4387,7 @@ MODULE_LICENSE("GPL"); * * Thanks go also to: * James Ashton (jaa101@syseng.anu.edu.au), - * Alan Cox (alan@redhat.com), + * Alan Cox (alan@lxorguk.ukuu.org.uk), * Allan Creighton (allanc@cs.usyd.edu.au), * Matthew Geier (matthew@cs.usyd.edu.au), * Remo di Giovanni (remo@cs.usyd.edu.au), diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h index b33ac47dd8d..44d31bbf39e 100644 --- a/drivers/net/wireless/wavelan.p.h +++ b/drivers/net/wireless/wavelan.p.h @@ -186,7 +186,7 @@ * * Thanks go also to: * James Ashton <jaa101@syseng.anu.edu.au>, - * Alan Cox <alan@redhat.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, * Allan Creighton <allanc@cs.usyd.edu.au>, * Matthew Geier <matthew@cs.usyd.edu.au>, * Remo di Giovanni <remo@cs.usyd.edu.au>, diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index b5de38a9b79..e124b1d6267 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3702,7 +3702,7 @@ wv_pcmcia_reset(struct net_device * dev) #endif i = pcmcia_access_configuration_register(link, ®); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, AccessConfigurationRegister, i); return FALSE; @@ -3716,7 +3716,7 @@ wv_pcmcia_reset(struct net_device * dev) reg.Action = CS_WRITE; reg.Value = reg.Value | COR_SW_RESET; i = pcmcia_access_configuration_register(link, ®); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, AccessConfigurationRegister, i); return FALSE; @@ -3725,7 +3725,7 @@ wv_pcmcia_reset(struct net_device * dev) reg.Action = CS_WRITE; reg.Value = COR_LEVEL_IRQ | COR_CONFIG; i = pcmcia_access_configuration_register(link, ®); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, AccessConfigurationRegister, i); return FALSE; @@ -3903,7 +3903,7 @@ wv_pcmcia_config(struct pcmcia_device * link) do { i = pcmcia_request_io(link, &link->io); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, RequestIO, i); break; @@ -3914,7 +3914,7 @@ wv_pcmcia_config(struct pcmcia_device * link) * actually assign a handler to the interrupt. */ i = pcmcia_request_irq(link, &link->irq); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, RequestIRQ, i); break; @@ -3926,7 +3926,7 @@ wv_pcmcia_config(struct pcmcia_device * link) */ link->conf.ConfigIndex = 1; i = pcmcia_request_configuration(link, &link->conf); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, RequestConfiguration, i); break; @@ -3942,7 +3942,7 @@ wv_pcmcia_config(struct pcmcia_device * link) req.Base = req.Size = 0; req.AccessSpeed = mem_speed; i = pcmcia_request_window(&link, &req, &link->win); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, RequestWindow, i); break; @@ -3954,7 +3954,7 @@ wv_pcmcia_config(struct pcmcia_device * link) mem.CardOffset = 0; mem.Page = 0; i = pcmcia_map_mem_page(link->win, &mem); - if(i != CS_SUCCESS) + if (i != 0) { cs_error(link, MapMemPage, i); break; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 74a5ad2f122..68789c6e1ce 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1977,10 +1977,10 @@ static int wl3501_config(struct pcmcia_device *link) link->io.BasePort1 = j; link->io.BasePort2 = link->io.BasePort1 + 0x10; i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) + if (i == 0) break; } - if (i != CS_SUCCESS) { + if (i != 0) { cs_error(link, RequestIO, i); goto failed; } |