diff options
Diffstat (limited to 'drivers/net')
227 files changed, 14941 insertions, 1597 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index b9eeadf01b7..975e25b19eb 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -805,52 +805,54 @@ static void poll_vortex(struct net_device *dev) #ifdef CONFIG_PM -static int vortex_suspend(struct pci_dev *pdev, pm_message_t state) +static int vortex_suspend(struct device *dev) { - struct net_device *dev = pci_get_drvdata(pdev); + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + + if (!ndev || !netif_running(ndev)) + return 0; + + netif_device_detach(ndev); + vortex_down(ndev, 1); - if (dev && netdev_priv(dev)) { - if (netif_running(dev)) { - netif_device_detach(dev); - vortex_down(dev, 1); - disable_irq(dev->irq); - } - pci_save_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - } return 0; } -static int vortex_resume(struct pci_dev *pdev) +static int vortex_resume(struct device *dev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct vortex_private *vp = netdev_priv(dev); + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); int err; - if (dev && vp) { - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - err = pci_enable_device(pdev); - if (err) { - pr_warning("%s: Could not enable device\n", - dev->name); - return err; - } - pci_set_master(pdev); - if (netif_running(dev)) { - err = vortex_up(dev); - if (err) - return err; - enable_irq(dev->irq); - netif_device_attach(dev); - } - } + if (!ndev || !netif_running(ndev)) + return 0; + + err = vortex_up(ndev); + if (err) + return err; + + netif_device_attach(ndev); + return 0; } -#endif /* CONFIG_PM */ +static struct dev_pm_ops vortex_pm_ops = { + .suspend = vortex_suspend, + .resume = vortex_resume, + .freeze = vortex_suspend, + .thaw = vortex_resume, + .poweroff = vortex_suspend, + .restore = vortex_resume, +}; + +#define VORTEX_PM_OPS (&vortex_pm_ops) + +#else /* !CONFIG_PM */ + +#define VORTEX_PM_OPS NULL + +#endif /* !CONFIG_PM */ #ifdef CONFIG_EISA static struct eisa_device_id vortex_eisa_ids[] = { @@ -3199,10 +3201,7 @@ static struct pci_driver vortex_driver = { .probe = vortex_init_one, .remove = __devexit_p(vortex_remove_one), .id_table = vortex_pci_tbl, -#ifdef CONFIG_PM - .suspend = vortex_suspend, - .resume = vortex_resume, -#endif + .driver.pm = VORTEX_PM_OPS, }; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2bea67c134f..b2f71f79baa 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" - depends on NET_ETHERNET && HAS_IOMEM + depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA select MII select PHYLIB select CRC32 @@ -1738,6 +1738,14 @@ config KS8851 help SPI driver for Micrel KS8851 SPI attached network chip. +config KS8851_MLL + tristate "Micrel KS8851 MLL" + depends on HAS_IOMEM + select MII + help + This platform driver is for Micrel KS8851 Address/data bus + multiplexed network chip. + config VIA_RHINE tristate "VIA Rhine support" depends on NET_PCI && PCI @@ -2475,6 +2483,8 @@ config S6GMAC To compile this driver as a module, choose M here. The module will be called s6gmac. +source "drivers/net/stmmac/Kconfig" + endif # NETDEV_1000 # @@ -3223,4 +3233,12 @@ config VIRTIO_NET This is the virtual network driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config VMXNET3 + tristate "VMware VMXNET3 ethernet driver" + depends on PCI && X86 && INET + help + This driver supports VMware's vmxnet3 virtual ethernet NIC. + To compile this driver as a module, choose M here: the + module will be called vmxnet3. + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index ae8cd30f13d..246323d7f16 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -2,6 +2,10 @@ # Makefile for the Linux network (ethercard) device drivers. # +obj-$(CONFIG_MII) += mii.o +obj-$(CONFIG_MDIO) += mdio.o +obj-$(CONFIG_PHYLIB) += phy/ + obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o obj-$(CONFIG_E1000) += e1000/ @@ -26,6 +30,7 @@ obj-$(CONFIG_TEHUTI) += tehuti.o obj-$(CONFIG_ENIC) += enic/ obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_BE2NET) += benet/ +obj-$(CONFIG_VMXNET3) += vmxnet3/ gianfar_driver-objs := gianfar.o \ gianfar_ethtool.o \ @@ -89,20 +94,18 @@ obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_KS8851) += ks8851.o +obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_SH_ETH) += sh_eth.o +obj-$(CONFIG_STMMAC_ETH) += stmmac/ # # end link order section # -obj-$(CONFIG_MII) += mii.o -obj-$(CONFIG_MDIO) += mdio.o -obj-$(CONFIG_PHYLIB) += phy/ - obj-$(CONFIG_SUNDANCE) += sundance.o obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index 5f0b05c2d71..d82a9a99475 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -1209,7 +1209,8 @@ static int __devinit ace_init(struct net_device *dev) memset(ap->info, 0, sizeof(struct ace_info)); memset(ap->skb, 0, sizeof(struct ace_skb)); - if (ace_load_firmware(dev)) + ecode = ace_load_firmware(dev); + if (ecode) goto init_error; ap->fw_running = 0; diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 2be49c81799..b25467ac895 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -628,15 +628,6 @@ static int ep93xx_open(struct net_device *dev) if (ep93xx_alloc_buffers(ep)) return -ENOMEM; - if (is_zero_ether_addr(dev->dev_addr)) { - random_ether_addr(dev->dev_addr); - printk(KERN_INFO "%s: generated random MAC address " - "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name, - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5]); - } - napi_enable(&ep->napi); if (ep93xx_start_hw(dev)) { @@ -877,6 +868,9 @@ static int ep93xx_eth_probe(struct platform_device *pdev) ep->mii.mdio_write = ep93xx_mdio_write; ep->mdc_divisor = 40; /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz. */ + if (is_zero_ether_addr(dev->dev_addr)) + random_ether_addr(dev->dev_addr); + err = register_netdev(dev); if (err) { dev_err(&pdev->dev, "Failed to register netdev\n"); diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index fdf5937233f..3f4b4300f53 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -34,6 +34,7 @@ * * */ +#include <linux/capability.h> #include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/kernel.h> @@ -721,7 +722,7 @@ static inline void update_rx_stats(struct net_device *dev, u32 status) ps->rx_errors++; if (status & RX_MISSED_FRAME) ps->rx_missed_errors++; - if (status & (RX_OVERLEN | RX_OVERLEN | RX_LEN_ERROR)) + if (status & (RX_OVERLEN | RX_RUNT | RX_LEN_ERROR)) ps->rx_length_errors++; if (status & RX_CRC_ERROR) ps->rx_crc_errors++; @@ -794,8 +795,6 @@ static int au1000_rx(struct net_device *dev) printk("rx len error\n"); if (status & RX_U_CNTRL_FRAME) printk("rx u control frame\n"); - if (status & RX_MISSED_FRAME) - printk("rx miss\n"); } } prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE); @@ -1089,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num) return NULL; } - if ((err = register_netdev(dev)) != 0) { + dev->base_addr = base; + dev->irq = irq; + dev->netdev_ops = &au1000_netdev_ops; + SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); + dev->watchdog_timeo = ETH_TX_TIMEOUT; + + err = register_netdev(dev); + if (err != 0) { printk(KERN_ERR "%s: Cannot register net device, error %d\n", DRV_NAME, err); free_netdev(dev); @@ -1210,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num) aup->tx_db_inuse[i] = pDB; } - dev->base_addr = base; - dev->irq = irq; - dev->netdev_ops = &au1000_netdev_ops; - SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); - dev->watchdog_timeo = ETH_TX_TIMEOUT; - /* * The boot code uses the ethernet controller, so reset it to start * fresh. au1000_init() expects that the device is in reset state. diff --git a/drivers/net/b44.c b/drivers/net/b44.c index e046943ef29..2a9132343b6 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -912,9 +912,6 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id) bp->istat = istat; __b44_disable_ints(bp); __napi_schedule(&bp->napi); - } else { - printk(KERN_ERR PFX "%s: Error, poll already scheduled\n", - dev->name); } irq_ack: diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c index 09d270913c5..ba29dc319b3 100644 --- a/drivers/net/bcm63xx_enet.c +++ b/drivers/net/bcm63xx_enet.c @@ -90,7 +90,7 @@ static int do_mdio_op(struct bcm_enet_priv *priv, unsigned int data) if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII) break; udelay(1); - } while (limit-- >= 0); + } while (limit-- > 0); return (limit < 0) ? 1 : 0; } diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 684c6fe24c8..3b79a225628 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -258,6 +258,9 @@ struct be_adapter { bool link_up; u32 port_num; bool promiscuous; + u32 cap; + u32 rx_fc; /* Rx flow control */ + u32 tx_fc; /* Tx flow control */ }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 3dd76c4170b..28a0eda9268 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -243,15 +243,26 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) int be_cmd_POST(struct be_adapter *adapter) { - u16 stage, error; + u16 stage; + int status, timeout = 0; - error = be_POST_stage_get(adapter, &stage); - if (error || stage != POST_STAGE_ARMFW_RDY) { - dev_err(&adapter->pdev->dev, "POST failed.\n"); - return -1; - } + do { + status = be_POST_stage_get(adapter, &stage); + if (status) { + dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n", + stage); + return -1; + } else if (stage != POST_STAGE_ARMFW_RDY) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2 * HZ); + timeout += 2; + } else { + return 0; + } + } while (timeout < 20); - return 0; + dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage); + return -1; } static inline void *embedded_payload(struct be_mcc_wrb *wrb) @@ -729,8 +740,8 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q, /* Create an rx filtering policy configuration on an i/f * Uses mbox */ -int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac, - bool pmac_invalid, u32 *if_handle, u32 *pmac_id) +int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags, + u8 *mac, bool pmac_invalid, u32 *if_handle, u32 *pmac_id) { struct be_mcc_wrb *wrb; struct be_cmd_req_if_create *req; @@ -746,8 +757,8 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req)); - req->capability_flags = cpu_to_le32(flags); - req->enable_flags = cpu_to_le32(flags); + req->capability_flags = cpu_to_le32(cap_flags); + req->enable_flags = cpu_to_le32(en_flags); req->pmac_invalid = pmac_invalid; if (!pmac_invalid) memcpy(req->mac_addr, mac, ETH_ALEN); @@ -1068,7 +1079,7 @@ int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc) } /* Uses mbox */ -int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num) +int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num, u32 *cap) { struct be_mcc_wrb *wrb; struct be_cmd_req_query_fw_cfg *req; @@ -1088,6 +1099,7 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num) if (!status) { struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb); *port_num = le32_to_cpu(resp->phys_port); + *cap = le32_to_cpu(resp->function_cap); } spin_unlock(&adapter->mbox_lock); @@ -1128,7 +1140,6 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd, spin_lock_bh(&adapter->mcc_lock); wrb = wrb_from_mccq(adapter); - req = embedded_payload(wrb); sge = nonembedded_sgl(wrb); be_wrb_hdr_prepare(wrb, cmd->size, false, 1); diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 93e432f3d92..e5f9676cf1b 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -62,13 +62,13 @@ enum { MCC_STATUS_QUEUE_FLUSHING = 0x4, /* The command is completing with a DMA error */ MCC_STATUS_DMA_FAILED = 0x5, - MCC_STATUS_NOT_SUPPORTED = 0x66 + MCC_STATUS_NOT_SUPPORTED = 66 }; #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF -#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */ +#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */ struct be_mcc_compl { u32 status; /* dword 0 */ @@ -720,8 +720,9 @@ extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr, extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr, u32 if_id, u32 *pmac_id); extern int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id); -extern int be_cmd_if_create(struct be_adapter *adapter, u32 if_flags, u8 *mac, - bool pmac_invalid, u32 *if_handle, u32 *pmac_id); +extern int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, + u32 en_flags, u8 *mac, bool pmac_invalid, + u32 *if_handle, u32 *pmac_id); extern int be_cmd_if_destroy(struct be_adapter *adapter, u32 if_handle); extern int be_cmd_eq_create(struct be_adapter *adapter, struct be_queue_info *eq, int eq_delay); @@ -760,7 +761,8 @@ extern int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc); extern int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc); -extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num); +extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, + u32 *port_num, u32 *cap); extern int be_cmd_reset_function(struct be_adapter *adapter); extern int be_process_mcc(struct be_adapter *adapter); extern int be_cmd_write_flashrom(struct be_adapter *adapter, diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 11445df3dbc..f0fd95b43c0 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -323,10 +323,12 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) if (ecmd->autoneg != 0) return -EINVAL; + adapter->tx_fc = ecmd->tx_pause; + adapter->rx_fc = ecmd->rx_pause; - status = be_cmd_set_flow_control(adapter, ecmd->tx_pause, - ecmd->rx_pause); - if (!status) + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) dev_warn(&adapter->pdev->dev, "Pause param set failed.\n"); return status; @@ -358,7 +360,7 @@ const struct ethtool_ops be_ethtool_ops = { .get_rx_csum = be_get_rx_csum, .set_rx_csum = be_set_rx_csum, .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = ethtool_op_set_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, .get_tso = ethtool_op_get_tso, diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 409cf059590..876b357101f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -197,7 +197,7 @@ void netdev_stats_update(struct be_adapter *adapter) /* no space available in linux */ dev_stats->tx_dropped = 0; - dev_stats->multicast = port_stats->tx_multicastframes; + dev_stats->multicast = port_stats->rx_multicast_frames; dev_stats->collisions = 0; /* detailed tx_errors */ @@ -747,9 +747,16 @@ static void be_rx_compl_process(struct be_adapter *adapter, struct be_eth_rx_compl *rxcp) { struct sk_buff *skb; - u32 vtp, vid; + u32 vlanf, vid; + u8 vtm; - vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp); + vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp); + vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp); + + /* vlanf could be wrongly set in some cards. + * ignore if vtm is not set */ + if ((adapter->cap == 0x400) && !vtm) + vlanf = 0; skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN); if (!skb) { @@ -772,7 +779,7 @@ static void be_rx_compl_process(struct be_adapter *adapter, skb->protocol = eth_type_trans(skb, adapter->netdev); skb->dev = adapter->netdev; - if (vtp) { + if (vlanf) { if (!adapter->vlan_grp || adapter->num_vlans == 0) { kfree_skb(skb); return; @@ -797,11 +804,18 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter, struct be_eq_obj *eq_obj = &adapter->rx_eq; u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len; u16 i, rxq_idx = 0, vid, j; + u8 vtm; num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp); pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp); vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp); rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp); + vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp); + + /* vlanf could be wrongly set in some cards. + * ignore if vtm is not set */ + if ((adapter->cap == 0x400) && !vtm) + vlanf = 0; skb = napi_get_frags(&eq_obj->napi); if (!skb) { @@ -1596,29 +1610,42 @@ static int be_open(struct net_device *netdev) status = be_cmd_link_status_query(adapter, &link_up); if (status) - return status; + goto ret_sts; be_link_status_update(adapter, link_up); + status = be_vid_config(adapter); + if (status) + goto ret_sts; + + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) + goto ret_sts; + schedule_delayed_work(&adapter->work, msecs_to_jiffies(100)); - return 0; +ret_sts: + return status; } static int be_setup(struct be_adapter *adapter) { struct net_device *netdev = adapter->netdev; - u32 if_flags; + u32 cap_flags, en_flags; int status; - if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS | - BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED | - BE_IF_FLAGS_PASS_L3L4_ERRORS; - status = be_cmd_if_create(adapter, if_flags, netdev->dev_addr, - false/* pmac_invalid */, &adapter->if_handle, - &adapter->pmac_id); + cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_MCAST_PROMISCUOUS | + BE_IF_FLAGS_PROMISCUOUS | + BE_IF_FLAGS_PASS_L3L4_ERRORS; + en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_PASS_L3L4_ERRORS; + + status = be_cmd_if_create(adapter, cap_flags, en_flags, + netdev->dev_addr, false/* pmac_invalid */, + &adapter->if_handle, &adapter->pmac_id); if (status != 0) goto do_none; - status = be_tx_queues_create(adapter); if (status != 0) goto if_destroy; @@ -1631,17 +1658,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto rx_qs_destroy; - status = be_vid_config(adapter); - if (status != 0) - goto mccqs_destroy; - - status = be_cmd_set_flow_control(adapter, true, true); - if (status != 0) - goto mccqs_destroy; return 0; -mccqs_destroy: - be_mcc_queues_destroy(adapter); rx_qs_destroy: be_rx_queues_destroy(adapter); tx_qs_destroy: @@ -1885,13 +1903,17 @@ static void be_netdev_init(struct net_device *netdev) struct be_adapter *adapter = netdev_priv(netdev); netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO | - NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | NETIF_F_GRO; + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_HW_CSUM | + NETIF_F_GRO; netdev->flags |= IFF_MULTICAST; adapter->rx_csum = true; + /* Default settings for Rx and Tx flow control */ + adapter->rx_fc = true; + adapter->tx_fc = true; + netif_set_gso_max_size(netdev, 65535); BE_SET_NETDEV_OPS(netdev, &be_netdev_ops); @@ -2041,11 +2063,16 @@ static int be_hw_up(struct be_adapter *adapter) if (status) return status; + status = be_cmd_reset_function(adapter); + if (status) + return status; + status = be_cmd_get_fw_ver(adapter, adapter->fw_ver); if (status) return status; - status = be_cmd_query_fw_cfg(adapter, &adapter->port_num); + status = be_cmd_query_fw_cfg(adapter, + &adapter->port_num, &adapter->cap); return status; } @@ -2093,10 +2120,6 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status) goto free_netdev; - status = be_cmd_reset_function(adapter); - if (status) - goto ctrl_clean; - status = be_stats_init(adapter); if (status) goto ctrl_clean; @@ -2153,6 +2176,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) be_close(netdev); rtnl_unlock(); } + be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc); be_clear(adapter); pci_save_state(pdev); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 6c7f795d12d..a4d83409f20 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -361,9 +361,12 @@ struct l2_fhdr { #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28) #define BNX2_L2CTX_HOST_BDIDX 0x00000004 -#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16 -#define BNX2_L2CTX_STATUSB_NUM(sb_id) \ - (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0) +#define BNX2_L2CTX_L5_STATUSB_NUM_SHIFT 16 +#define BNX2_L2CTX_L2_STATUSB_NUM_SHIFT 24 +#define BNX2_L2CTX_L5_STATUSB_NUM(sb_id) \ + (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L5_STATUSB_NUM_SHIFT) : 0) +#define BNX2_L2CTX_L2_STATUSB_NUM(sb_id) \ + (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT) : 0) #define BNX2_L2CTX_HOST_BSEQ 0x00000008 #define BNX2_L2CTX_NX_BSEQ 0x0000000c #define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010 diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 69c5b15e22d..40fb5eefc72 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -691,7 +691,7 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_dev, int reporting) { const struct net_device_ops *slave_ops = slave_dev->netdev_ops; - static int (*ioctl)(struct net_device *, struct ifreq *, int); + int (*ioctl)(struct net_device *, struct ifreq *, int); struct ifreq ifr; struct mii_ioctl_data *mii; @@ -3665,10 +3665,10 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, if (skb->protocol == htons(ETH_P_IP)) { return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ - (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count; + (data->h_dest[5] ^ data->h_source[5])) % count; } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3695,7 +3695,7 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3706,7 +3706,7 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, { struct ethhdr *data = (struct ethhdr *)skb->data; - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /*-------------------------- Device entry points ----------------------------*/ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 6044e12ff9f..8762a27a2a1 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/sched.h> #include <linux/sysdev.h> #include <linux/fs.h> #include <linux/types.h> @@ -1182,6 +1183,7 @@ static ssize_t bonding_store_primary(struct device *d, ": %s: Setting %s as primary slave.\n", bond->dev->name, slave->dev->name); bond->primary_slave = slave; + strcpy(bond->params.primary, slave->dev->name); bond_select_active_slave(bond); goto out; } diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index df32c109b7a..772f6d2489c 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. -config CAN_SJA1000 - depends on CAN_DEV && HAS_IOMEM - tristate "Philips SJA1000" - ---help--- - Driver for the SJA1000 CAN controllers from Philips or NXP - -config CAN_SJA1000_ISA - depends on CAN_SJA1000 && ISA - tristate "ISA Bus based legacy SJA1000 driver" - ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. - -config CAN_SJA1000_PLATFORM - depends on CAN_SJA1000 - tristate "Generic Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. - -config CAN_SJA1000_OF_PLATFORM - depends on CAN_SJA1000 && PPC_OF - tristate "Generic OF Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the OpenFirmware "platform bus" found on embedded systems with - OpenFirmware bindings, e.g. if you have a PowerPC based system - you may want to enable this option. - -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). - -config CAN_EMS_USB - tristate "EMS CPC-USB/ARM7 CAN/USB interface" - depends on USB && CAN_DEV - ---help--- - This driver is for the one channel CPC-USB/ARM7 CAN/USB interface - from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). - -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). - config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN && CAN_DEV && ARCH_AT91SAM9263 + depends on CAN_DEV && ARCH_AT91SAM9263 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. +source "drivers/net/can/sja1000/Kconfig" + +source "drivers/net/can/usb/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f0b9a1e1db4..2868fe842a4 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -589,6 +589,22 @@ static int can_changelink(struct net_device *dev, return 0; } +static size_t can_get_size(const struct net_device *dev) +{ + struct can_priv *priv = netdev_priv(dev); + size_t size; + + size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ + size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ + size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ + size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ + size += sizeof(struct can_bittiming_const); + + return size; +} + static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -613,6 +629,11 @@ nla_put_failure: return -EMSGSIZE; } +static size_t can_get_xstats_size(const struct net_device *dev) +{ + return sizeof(struct can_device_stats); +} + static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -639,7 +660,9 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .setup = can_setup, .newlink = can_newlink, .changelink = can_changelink, + .get_size = can_get_size, .fill_info = can_fill_info, + .get_xstats_size = can_get_xstats_size, .fill_xstats = can_fill_xstats, }; diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig new file mode 100644 index 00000000000..4c674927f24 --- /dev/null +++ b/drivers/net/can/sja1000/Kconfig @@ -0,0 +1,47 @@ +menuconfig CAN_SJA1000 + tristate "Philips/NXP SJA1000 devices" + depends on CAN_DEV && HAS_IOMEM + +if CAN_SJA1000 + +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + depends on ISA + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + ---help--- + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. + +config CAN_SJA1000_OF_PLATFORM + tristate "Generic OF Platform Bus based SJA1000 driver" + depends on PPC_OF + ---help--- + This driver adds support for the SJA1000 chips connected to + the OpenFirmware "platform bus" found on embedded systems with + OpenFirmware bindings, e.g. if you have a PowerPC based system + you may want to enable this option. + +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI + ---help--- + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). + +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI + ---help--- + This driver is for the the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). + +endif diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c index 3373560405b..9dd076a626a 100644 --- a/drivers/net/can/sja1000/sja1000_of_platform.c +++ b/drivers/net/can/sja1000/sja1000_of_platform.c @@ -213,6 +213,7 @@ static struct of_device_id __devinitdata sja1000_ofp_table[] = { {.compatible = "nxp,sja1000"}, {}, }; +MODULE_DEVICE_TABLE(of, sja1000_ofp_table); static struct of_platform_driver sja1000_ofp_driver = { .owner = THIS_MODULE, diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig new file mode 100644 index 00000000000..bbc78e0b8a1 --- /dev/null +++ b/drivers/net/can/usb/Kconfig @@ -0,0 +1,10 @@ +menu "CAN USB interfaces" + depends on USB && CAN_DEV + +config CAN_EMS_USB + tristate "EMS CPC-USB/ARM7 CAN/USB interface" + ---help--- + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + +endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index c3f75ba701b..0afd51d4c7a 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -3,3 +3,5 @@ # obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 9012e0abc62..abdbd9c2b78 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -319,7 +319,7 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); - cf->can_id = msg->msg.can_msg.id; + cf->can_id = le32_to_cpu(msg->msg.can_msg.id); cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8); if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME @@ -813,6 +813,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc; } + /* Respect byte order */ + msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id); + for (i = 0; i < MAX_TX_URBS; i++) { if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) { context = &dev->tx_contexts[i]; diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 05916aafa4f..f857afe8e48 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4342,11 +4342,11 @@ static int cas_open(struct net_device *dev) cas_unlock_all_restore(cp, flags); } + err = -ENOMEM; if (cas_tx_tiny_alloc(cp) < 0) - return -ENOMEM; + goto err_unlock; /* alloc rx descriptors */ - err = -ENOMEM; if (cas_alloc_rxds(cp) < 0) goto err_tx_tiny; @@ -4386,6 +4386,7 @@ err_spare: cas_free_rxds(cp); err_tx_tiny: cas_tx_tiny_free(cp); +err_unlock: mutex_unlock(&cp->pm_mutex); return err; } diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 211c8e9182f..3bf1b04f2ca 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -2264,9 +2264,9 @@ static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev) cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val); if (sb_id == 0) - val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT; + val = 2 << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT; else - val = BNX2_L2CTX_STATUSB_NUM(sb_id); + val = BNX2_L2CTX_L2_STATUSB_NUM(sb_id); cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val); rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE); @@ -2423,7 +2423,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev) cp->int_num = 0; if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) { u32 sb_id = cp->status_blk_num; - u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id); + u32 sb = BNX2_L2CTX_L5_STATUSB_NUM(sb_id); cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT; cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb); @@ -2733,7 +2733,8 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event, cnic_ulp_init(dev); else if (event == NETDEV_UNREGISTER) cnic_ulp_exit(dev); - else if (event == NETDEV_UP) { + + if (event == NETDEV_UP) { if (cnic_register_netdev(dev) != 0) { cnic_put(dev); goto done; diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h index a49235739ee..d8b09efdcb5 100644 --- a/drivers/net/cnic_if.h +++ b/drivers/net/cnic_if.h @@ -12,8 +12,8 @@ #ifndef CNIC_IF_H #define CNIC_IF_H -#define CNIC_MODULE_VERSION "2.0.0" -#define CNIC_MODULE_RELDATE "May 21, 2009" +#define CNIC_MODULE_VERSION "2.0.1" +#define CNIC_MODULE_RELDATE "Oct 01, 2009" #define CNIC_ULP_RDMA 0 #define CNIC_ULP_ISCSI 1 diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index f86612857a7..6366061712f 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -879,7 +879,7 @@ recycle: pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); (*sd->pg_chunk.p_cnt)--; - if (!*sd->pg_chunk.p_cnt) + if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page) pci_unmap_page(adap->pdev, sd->pg_chunk.mapping, fl->alloc_size, @@ -2088,7 +2088,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, PCI_DMA_FROMDEVICE); (*sd->pg_chunk.p_cnt)--; - if (!*sd->pg_chunk.p_cnt) + if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page) pci_unmap_page(adap->pdev, sd->pg_chunk.mapping, fl->alloc_size, diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 65a2d0ba64e..e3478314c00 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) /* EMAC mac_control register */ -#define EMAC_MACCONTROL_TXPTYPE (0x200) -#define EMAC_MACCONTROL_TXPACEEN (0x40) -#define EMAC_MACCONTROL_MIIEN (0x20) -#define EMAC_MACCONTROL_GIGABITEN (0x80) -#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7) -#define EMAC_MACCONTROL_FULLDUPLEXEN (0x1) +#define EMAC_MACCONTROL_TXPTYPE BIT(9) +#define EMAC_MACCONTROL_TXPACEEN BIT(6) +#define EMAC_MACCONTROL_GMIIEN BIT(5) +#define EMAC_MACCONTROL_GIGABITEN BIT(7) +#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) /* GIGABIT MODE related bits */ -#define EMAC_DM646X_MACCONTORL_GMIIEN BIT(5) #define EMAC_DM646X_MACCONTORL_GIG BIT(7) #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) @@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) /* MAC_IN_VECTOR (0x180) register bit fields */ -#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT (0x20000) -#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT (0x10000) -#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC (0x0100) -#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC (0x01) +#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) +#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) +#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) +#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) /** NOTE:: For DM646x the IN_VECTOR has changed */ #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) @@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) - /* CPPI bit positions */ #define EMAC_CPPI_SOP_BIT BIT(31) #define EMAC_CPPI_EOP_BIT BIT(30) @@ -333,6 +330,9 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) #define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) +/* EMAC Stats Clear Mask */ +#define EMAC_STATS_CLR_MASK (0xFFFFFFFF) + /** net_buf_obj: EMAC network bufferdata structure * * EMAC network buffer data structure @@ -747,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv) if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { mac_control = emac_read(EMAC_MACCONTROL); - mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN | - EMAC_DM646X_MACCONTORL_GIG | + mac_control |= (EMAC_DM646X_MACCONTORL_GIG | EMAC_DM646X_MACCONTORL_GIGFORCE); } else { /* Clear the GIG bit and GIGFORCE bit */ @@ -2105,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv) /* Enable MII */ val = emac_read(EMAC_MACCONTROL); - val |= (EMAC_MACCONTROL_MIIEN); + val |= (EMAC_MACCONTROL_GMIIEN); emac_write(EMAC_MACCONTROL, val); /* Enable NAPI and interrupts */ @@ -2137,9 +2136,6 @@ static int emac_poll(struct napi_struct *napi, int budget) u32 status = 0; u32 num_pkts = 0; - if (!netif_running(ndev)) - return 0; - /* Check interrupt vectors and call packet processing */ status = emac_read(EMAC_MACINVECTOR); @@ -2218,7 +2214,7 @@ void emac_poll_controller(struct net_device *ndev) struct emac_priv *priv = netdev_priv(ndev); emac_int_disable(priv); - emac_irq(ndev->irq, priv); + emac_irq(ndev->irq, ndev); emac_int_enable(priv); } #endif @@ -2548,40 +2544,49 @@ static int emac_dev_stop(struct net_device *ndev) static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) { struct emac_priv *priv = netdev_priv(ndev); + u32 mac_control; + u32 stats_clear_mask; /* update emac hardware stats and reset the registers*/ + mac_control = emac_read(EMAC_MACCONTROL); + + if (mac_control & EMAC_MACCONTROL_GMIIEN) + stats_clear_mask = EMAC_STATS_CLR_MASK; + else + stats_clear_mask = 0; + priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES); - emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) + emac_read(EMAC_TXSINGLECOLL) + emac_read(EMAC_TXMULTICOLL)); - emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXCOLLISION, stats_clear_mask); + emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); + emac_write(EMAC_TXMULTICOLL, stats_clear_mask); priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + emac_read(EMAC_RXJABBER) + emac_read(EMAC_RXUNDERSIZED)); - emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXOVERSIZED, stats_clear_mask); + emac_write(EMAC_RXJABBER, stats_clear_mask); + emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + emac_read(EMAC_RXMOFOVERRUNS)); - emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); - emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); + emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); - emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); priv->net_dev_stats.tx_carrier_errors += emac_read(EMAC_TXCARRIERSENSE); - emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN); - emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXUNDERRUN, stats_clear_mask); return &priv->net_dev_stats; } diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 9686c1fa28f..7a3bdac84ab 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -237,6 +237,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h index 80817c2edfb..fb1c924d79b 100644 --- a/drivers/net/dm9000.h +++ b/drivers/net/dm9000.h @@ -50,7 +50,7 @@ #define DM9000_RCSR 0x32 #define CHIPR_DM9000A 0x19 -#define CHIPR_DM9000B 0x1B +#define CHIPR_DM9000B 0x1A #define DM9000_MRCMDX 0xF0 #define DM9000_MRCMD 0xF2 diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 679965c2bb8..d269a68ce35 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -151,11 +151,13 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/dma-mapping.h> +#include <linux/dmapool.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/mii.h> @@ -601,6 +603,7 @@ struct nic { struct mem *mem; dma_addr_t dma_addr; + struct pci_pool *cbs_pool; dma_addr_t cbs_dma_addr; u8 adaptive_ifs; u8 tx_threshold; @@ -1426,19 +1429,31 @@ static int e100_phy_init(struct nic *nic) } else DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); - /* Isolate all the PHY ids */ - for (addr = 0; addr < 32; addr++) - mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); - /* Select the discovered PHY */ - bmcr &= ~BMCR_ISOLATE; - mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); - /* Get phy ID */ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); nic->phy = (u32)id_hi << 16 | (u32)id_lo; DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy); + /* Select the phy and isolate the rest */ + for (addr = 0; addr < 32; addr++) { + if (addr != nic->mii.phy_id) { + mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); + } else if (nic->phy != phy_82552_v) { + bmcr = mdio_read(netdev, addr, MII_BMCR); + mdio_write(netdev, addr, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + } + } + /* + * Workaround for 82552: + * Clear the ISOLATE bit on selected phy_id last (mirrored on all + * other phy_id's) using bmcr value from addr discovery loop above. + */ + if (nic->phy == phy_82552_v) + mdio_write(netdev, nic->mii.phy_id, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + /* Handle National tx phys */ #define NCS_PHY_MODEL_MASK 0xFFF0FFFF if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) { @@ -1780,9 +1795,7 @@ static void e100_clean_cbs(struct nic *nic) nic->cb_to_clean = nic->cb_to_clean->next; nic->cbs_avail++; } - pci_free_consistent(nic->pdev, - sizeof(struct cb) * nic->params.cbs.count, - nic->cbs, nic->cbs_dma_addr); + pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr); nic->cbs = NULL; nic->cbs_avail = 0; } @@ -1800,8 +1813,8 @@ static int e100_alloc_cbs(struct nic *nic) nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL; nic->cbs_avail = 0; - nic->cbs = pci_alloc_consistent(nic->pdev, - sizeof(struct cb) * count, &nic->cbs_dma_addr); + nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL, + &nic->cbs_dma_addr); if (!nic->cbs) return -ENOMEM; @@ -2828,7 +2841,11 @@ static int __devinit e100_probe(struct pci_dev *pdev, DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n"); goto err_out_free; } - + nic->cbs_pool = pci_pool_create(netdev->name, + nic->pdev, + nic->params.cbs.count * sizeof(struct cb), + sizeof(u32), + 0); DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n", (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), pdev->irq, netdev->dev_addr); @@ -2858,6 +2875,7 @@ static void __devexit e100_remove(struct pci_dev *pdev) unregister_netdev(netdev); e100_free(nic); pci_iounmap(pdev, nic->csr); + pci_pool_destroy(nic->cbs_pool); free_netdev(netdev); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index b53b40ba88a..d1e0563a67d 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1803,7 +1803,7 @@ struct e1000_info e1000_82574_info = { | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, .pba = 20, - .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, + .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_bm, @@ -1820,7 +1820,7 @@ struct e1000_info e1000_82583_info = { | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, .pba = 20, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_bm, diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index c0f185beb8b..1190167a8b3 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -76,6 +76,7 @@ /* Extended Device Control */ #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -347,6 +348,7 @@ /* Extended Configuration Control and Size */ #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 981936c1fb4..3e187b0e420 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -141,6 +141,22 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + +/* BM PHY Copper Specific Status */ +#define BM_CS_STATUS 17 +#define BM_CS_STATUS_LINK_UP 0x0400 +#define BM_CS_STATUS_RESOLVED 0x0800 +#define BM_CS_STATUS_SPEED_MASK 0xC000 +#define BM_CS_STATUS_SPEED_1000 0x8000 + +/* 82577 Mobile Phy Status Register */ +#define HV_M_STATUS 26 +#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 +#define HV_M_STATUS_SPEED_MASK 0x0300 +#define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_LINK_UP 0x0040 + enum e1000_boards { board_82571, board_82572, @@ -519,9 +535,13 @@ extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); extern s32 e1000e_get_cfg_done(struct e1000_hw *hw); @@ -538,7 +558,11 @@ extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); @@ -546,7 +570,11 @@ extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_check_downshift(struct e1000_hw *hw); extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 1bf4d2a5d34..e82638ecae8 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev, hw->fc.current_mode = hw->fc.requested_mode; - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw)); + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000e_force_mac_fc(hw); + if (retval) + goto out; + e1000e_set_fc_watermarks(hw); + } } +out: clear_bit(__E1000_RESETTING, &adapter->state); return retval; } diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index fd44d9f9076..aaea41ef794 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -764,11 +764,13 @@ struct e1000_phy_operations { s32 (*get_cable_length)(struct e1000_hw *); s32 (*get_phy_info)(struct e1000_hw *); s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *); void (*release_phy)(struct e1000_hw *); s32 (*reset_phy)(struct e1000_hw *); s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); + s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16); s32 (*cfg_on_link_up)(struct e1000_hw *); }; @@ -901,6 +903,7 @@ struct e1000_shadow_ram { struct e1000_dev_spec_ich8lan { bool kmrn_lock_loss_workaround_enabled; struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS]; + bool nvm_k1_enabled; }; struct e1000_hw { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 99df2abf82a..eff3f478365 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -122,6 +122,27 @@ #define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ + +/* SMBus Address Phy Register */ +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 + +/* Strapping Option Register - RO */ +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 + +/* OEM Bits Phy Register */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ + +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -200,6 +221,10 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); +static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -242,7 +267,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_phy_reg = e1000_write_phy_reg_hv; + phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -303,6 +332,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked; + phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: @@ -469,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) goto out; } - if (hw->mac.type == e1000_pchlan) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_ENABLE); - if (ret_val) - goto out; - } - /* * First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -486,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) goto out; + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_k1_gig_workaround_hv(hw, link); + if (ret_val) + goto out; + } + if (!link) goto out; /* No link detected */ @@ -568,12 +597,39 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) static DEFINE_MUTEX(nvm_mutex); /** + * e1000_acquire_nvm_ich8lan - Acquire NVM mutex + * @hw: pointer to the HW structure + * + * Acquires the mutex for performing NVM operations. + **/ +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_lock(&nvm_mutex); + + return 0; +} + +/** + * e1000_release_nvm_ich8lan - Release NVM mutex + * @hw: pointer to the HW structure + * + * Releases the mutex used while performing NVM operations. + **/ +static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_unlock(&nvm_mutex); + + return; +} + +static DEFINE_MUTEX(swflag_mutex); + +/** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure * - * Acquires the software control flag for performing NVM and PHY - * operations. This is a function pointer entry point only called by - * read/write routines for the PHY and NVM parts. + * Acquires the software control flag for performing PHY and select + * MAC CSR accesses. **/ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) { @@ -582,7 +638,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) might_sleep(); - mutex_lock(&nvm_mutex); + mutex_lock(&swflag_mutex); while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); @@ -599,7 +655,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) goto out; } - timeout = PHY_CFG_TIMEOUT * 2; + timeout = SW_FLAG_TIMEOUT; extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); @@ -623,7 +679,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) out: if (ret_val) - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); return ret_val; } @@ -632,9 +688,8 @@ out: * e1000_release_swflag_ich8lan - Release software control flag * @hw: pointer to the HW structure * - * Releases the software control flag for performing NVM and PHY operations. - * This is a function pointer entry point only called by read/write - * routines for the PHY and NVM parts. + * Releases the software control flag for performing PHY and select + * MAC CSR accesses. **/ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) { @@ -644,7 +699,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); + + return; } /** @@ -752,6 +809,327 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) } /** + * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * + * SW should configure the LCD from the NVM extended configuration region + * as a workaround for certain parts. + **/ +static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; + s32 ret_val; + u16 word_addr, reg_data, reg_addr, phy_page = 0; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + /* + * Initialize the PHY from the NVM on ICH platforms. This + * is needed due to an issue where the NVM configuration is + * not properly autoloaded after power transitions. + * Therefore, after each PHY reset, we will load the + * configuration data out of the NVM manually. + */ + if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) || + (hw->mac.type == e1000_pchlan)) { + struct e1000_adapter *adapter = hw->adapter; + + /* Check if SW needs to configure the PHY */ + if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || + (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || + (hw->mac.type == e1000_pchlan)) + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; + else + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; + + data = er32(FEXTNVM); + if (!(data & sw_cfg_mask)) + goto out; + + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); + + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ + data = er32(EXTCNF_CTRL); + if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + goto out; + + cnf_size = er32(EXTCNF_SIZE); + cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; + cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; + if (!cnf_size) + goto out; + + cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; + cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; + + if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) { + /* + * HW configures the SMBus address and LEDs when the + * OEM and LCD Write Enable bits are set in the NVM. + * When both NVM bits are cleared, SW will configure + * them instead. + */ + data = er32(STRAP); + data &= E1000_STRAP_SMBUS_ADDRESS_MASK; + reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; + reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, + reg_data); + if (ret_val) + goto out; + + data = er32(LEDCTL); + ret_val = e1000_write_phy_reg_hv_locked(hw, + HV_LED_CONFIG, + (u16)data); + if (ret_val) + goto out; + } + /* Configure LCD from extended configuration region. */ + + /* cnf_base_addr is in DWORD */ + word_addr = (u16)(cnf_base_addr << 1); + + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, + ®_data); + if (ret_val) + goto out; + + ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), + 1, ®_addr); + if (ret_val) + goto out; + + /* Save off the PHY page for future writes. */ + if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { + phy_page = reg_data; + continue; + } + + reg_addr &= PHY_REG_MASK; + reg_addr |= phy_page; + + ret_val = phy->ops.write_phy_reg_locked(hw, + (u32)reg_addr, + reg_data); + if (ret_val) + goto out; + } + } + +out: + hw->phy.ops.release_phy(hw); + return ret_val; +} + +/** + * e1000_k1_gig_workaround_hv - K1 Si workaround + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * If K1 is enabled for 1Gbps, the MAC might stall when transitioning + * from a lower speed. This workaround disables K1 whenever link is at 1Gig + * If link is down, the function will restore the default K1 setting located + * in the NVM. + **/ +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) +{ + s32 ret_val = 0; + u16 status_reg = 0; + bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled; + + if (hw->mac.type != e1000_pchlan) + goto out; + + /* Wrap the whole flow with the sw flag */ + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + + /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ + if (link) { + if (hw->phy.type == e1000_phy_82578) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + BM_CS_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_MASK; + + if (status_reg == (BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_1000)) + k1_enable = false; + } + + if (hw->phy.type == e1000_phy_82577) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + HV_M_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_MASK; + + if (status_reg == (HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_1000)) + k1_enable = false; + } + + /* Link stall fix for link up */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x0100); + if (ret_val) + goto release; + + } else { + /* Link stall fix for link down */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x4100); + if (ret_val) + goto release; + } + + ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); + +release: + hw->phy.ops.release_phy(hw); +out: + return ret_val; +} + +/** + * e1000_configure_k1_ich8lan - Configure K1 power state + * @hw: pointer to the HW structure + * @enable: K1 state to configure + * + * Configure the K1 power state based on the provided parameter. + * Assumes semaphore already acquired. + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + **/ +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) +{ + s32 ret_val = 0; + u32 ctrl_reg = 0; + u32 ctrl_ext = 0; + u32 reg = 0; + u16 kmrn_reg = 0; + + ret_val = e1000e_read_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto out; + + if (k1_enable) + kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE; + else + kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE; + + ret_val = e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); + if (ret_val) + goto out; + + udelay(20); + ctrl_ext = er32(CTRL_EXT); + ctrl_reg = er32(CTRL); + + reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + reg |= E1000_CTRL_FRCSPD; + ew32(CTRL, reg); + + ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); + udelay(20); + ew32(CTRL, ctrl_reg); + ew32(CTRL_EXT, ctrl_ext); + udelay(20); + +out: + return ret_val; +} + +/** + * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * @d0_state: boolean if entering d0 or d3 device state + * + * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are + * collectively called OEM bits. The OEM Write Enable bit and SW Config bit + * in NVM determines whether HW should configure LPLU and Gbe Disable. + **/ +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 oem_reg; + + if (hw->mac.type != e1000_pchlan) + return ret_val; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + mac_reg = er32(EXTCNF_CTRL); + if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) + goto out; + + mac_reg = er32(FEXTNVM); + if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M)) + goto out; + + mac_reg = er32(PHY_CTRL); + + ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU); + + if (d0_state) { + if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } else { + if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } + /* Restart auto-neg to activate the bits */ + if (!e1000_check_reset_block(hw)) + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); + +out: + hw->phy.ops.release_phy(hw); + + return ret_val; +} + + +/** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. **/ @@ -791,10 +1169,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire_phy(hw); if (ret_val) return ret_val; + hw->phy.addr = 1; - e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + if (ret_val) + goto out; hw->phy.ops.release_phy(hw); + /* + * Configure the K1 Si workaround during phy reset assuming there is + * link so that it disables K1 if link is in 1Gbps. + */ + ret_val = e1000_k1_gig_workaround_hv(hw, true); + +out: return ret_val; } @@ -840,11 +1228,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { - struct e1000_phy_info *phy = &hw->phy; - u32 i; - u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val; - u16 word_addr, reg_data, reg_addr, phy_page = 0; + s32 ret_val = 0; + u16 reg; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -859,81 +1244,20 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) return ret_val; } - /* - * Initialize the PHY from the NVM on ICH platforms. This - * is needed due to an issue where the NVM configuration is - * not properly autoloaded after power transitions. - * Therefore, after each PHY reset, we will load the - * configuration data out of the NVM manually. - */ - if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) { - struct e1000_adapter *adapter = hw->adapter; - - /* Check if SW needs configure the PHY */ - if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || - (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M)) - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - else - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - return 0; - - /* Wait for basic configuration completes before proceeding */ - e1000_lan_init_done_ich8lan(hw); - - /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration - */ - data = er32(EXTCNF_CTRL); - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) - return 0; - - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) - return 0; - - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - /* Configure LCD from extended configuration region. */ - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2), - 1, - ®_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2 + 1), - 1, - ®_addr); - if (ret_val) - return ret_val; - - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); - reg_addr |= phy_page; + /* Configure the LCD with the extended configuration region in NVM */ + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; - ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data); - if (ret_val) - return ret_val; - } - } + /* Configure the LCD with the OEM bits in NVM */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_oem_bits_config_ich8lan(hw, true); +out: return 0; } @@ -1054,6 +1378,38 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) } /** + * e1000_set_lplu_state_pchlan - Set Low Power Link Up state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU state according to the active flag. For PCH, if OEM write + * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set + * the phy speed. This function will manually set the LPLU bit and restart + * auto-neg as hw would do. D3 and D0 LPLU will call the same function + * since it configures the same bit. + **/ +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) +{ + s32 ret_val = 0; + u16 oem_reg; + + ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + if (active) + oem_reg |= HV_OEM_BITS_LPLU; + else + oem_reg &= ~HV_OEM_BITS_LPLU; + + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg); + +out: + return ret_val; +} + +/** * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state * @hw: pointer to the HW structure * @active: TRUE to enable LPLU, FALSE to disable @@ -1314,12 +1670,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { hw_dbg(hw, "nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; + ret_val = -E1000_ERR_NVM; + goto out; } - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { @@ -1345,7 +1700,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); out: if (ret_val) @@ -1603,11 +1958,15 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_NVM; } + nvm->ops.acquire_nvm(hw); + for (i = 0; i < words; i++) { dev_spec->shadow_ram[offset+i].modified = 1; dev_spec->shadow_ram[offset+i].value = data[i]; } + nvm->ops.release_nvm(hw); + return 0; } @@ -1637,9 +1996,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_sw) goto out; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); /* * We're writing to the opposite bank so if we're on bank 1, @@ -1657,7 +2014,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) old_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } else { @@ -1665,7 +2022,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) new_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } @@ -1723,7 +2080,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1736,7 +2093,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } data &= 0xBFFF; @@ -1744,7 +2101,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset * 2 + 1, (u8)(data >> 8)); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1757,7 +2114,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1767,7 +2124,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) dev_spec->shadow_ram[i].value = 0xFFFF; } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); /* * Reload the EEPROM, or else modifications will not appear @@ -1831,14 +2188,12 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) **/ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) { + struct e1000_nvm_info *nvm = &hw->nvm; union ich8_flash_protected_range pr0; union ich8_hws_flash_status hsfsts; u32 gfpreg; - s32 ret_val; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - return; + nvm->ops.acquire_nvm(hw); gfpreg = er32flash(ICH_FLASH_GFPREG); @@ -1859,7 +2214,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flockdn = true; ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); } /** @@ -2229,6 +2584,8 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2263,6 +2620,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(PBS, E1000_PBS_16K); } + if (hw->mac.type == e1000_pchlan) { + /* Save the NVM K1 bit setting*/ + ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®); + if (ret_val) + return ret_val; + + if (reg & E1000_NVM_K1_ENABLE) + dev_spec->nvm_k1_enabled = true; + else + dev_spec->nvm_k1_enabled = false; + } + ctrl = er32(CTRL); if (!e1000_check_reset_block(hw)) { @@ -2304,7 +2673,19 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "Auto Read Done did not complete\n"); } } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; + + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_oem_bits_config_ich8lan(hw, true); + if (ret_val) + goto out; + } /* * For PCH, this write will make sure that any noise * will be detected as a CRC error and be dropped rather than show up @@ -2323,6 +2704,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) ret_val = e1000_hv_phy_workarounds_ich8lan(hw); +out: return ret_val; } @@ -2627,14 +3009,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, if (ret_val) return ret_val; - if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_DISABLE); - if (ret_val) - return ret_val; - } - if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { @@ -2843,9 +3217,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - /* Workaround SWFLAG unexpectedly set during S0->Sx */ if (hw->mac.type == e1000_pchlan) - udelay(500); + e1000_phy_hw_reset_ich8lan(hw); default: break; } @@ -3113,9 +3486,9 @@ static struct e1000_phy_operations ich8_phy_ops = { }; static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire_nvm = e1000_acquire_swflag_ich8lan, + .acquire_nvm = e1000_acquire_nvm_ich8lan, .read_nvm = e1000_read_nvm_ich8lan, - .release_nvm = e1000_release_swflag_ich8lan, + .release_nvm = e1000_release_nvm_ich8lan, .update_nvm = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, .validate_nvm = e1000_validate_nvm_checksum_ich8lan, @@ -3186,6 +3559,7 @@ struct e1000_info e1000_pch_info = { | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES + | FLAG_DISABLE_FC_PAUSE_TIME /* errata */ | FLAG_APME_IN_WUC, .pba = 26, .max_hw_frame_size = 4096, diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 16c193a6c95..fad8f9ea004 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter) /* * flow control settings * - * The high water mark must be low enough to fit two full frame + * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and * - the full Rx FIFO size minus the early receive size (for parts * with ERT support assuming ERT set to E1000_ERT_2048), or - * - the full Rx FIFO size minus two full frames + * - the full Rx FIFO size minus one full frame */ - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (E1000_ERT_2048 << 3))); - else - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (2 * adapter->max_frame_size))); + if (hw->mac.type == e1000_pchlan) { + /* + * Workaround PCH LOM adapter hangs with certain network + * loads. If hangs persist, try disabling Tx flow control. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + fc->high_water = 0x3500; + fc->low_water = 0x1500; + } else { + fc->high_water = 0x5000; + fc->low_water = 0x3000; + } + } else { + if ((adapter->flags & FLAG_HAS_ERT) && + (adapter->netdev->mtu > ETH_DATA_LEN)) + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - (E1000_ERT_2048 << 3))); + else + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); - fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ - fc->low_water = (fc->high_water - (2 * adapter->max_frame_size)); - fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */ + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) fc->pause_time = 0xFFFF; @@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter) if (mac->ops.init_hw(hw)) e_err("Hardware Error\n"); + /* additional part of the flow-control workaround above */ + if (hw->mac.type == e1000_pchlan) + ew32(FCRTV_PCH, 0x1000); + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ @@ -3610,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work) case SPEED_100: txb2b = 0; netdev->tx_queue_len = 100; - /* maybe add some timeout factor ? */ + adapter->tx_timeout_factor = 10; break; } @@ -4288,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) msleep(1); - /* e1000e_down has a dependency on max_frame_size */ + /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); + netdev->mtu = new_mtu; if (netif_running(netdev)) e1000e_down(adapter); @@ -4319,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - if (netif_running(netdev)) e1000e_up(adapter); else @@ -4982,12 +4998,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_pci_reg; /* AER (Advanced Error Reporting) hooks */ - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } + pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); /* PCI config space info */ @@ -5263,7 +5274,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - int err; /* * flush_scheduled work may reschedule our watchdog task, so @@ -5299,10 +5309,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) free_netdev(netdev); /* AER disable */ - err = pci_disable_pcie_error_reporting(pdev); - if (err) - dev_err(&pdev->dev, - "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 994401fd066..85f955f7041 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] = #define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) #define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ #define I82577_CTRL_REG 23 -#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10) /* 82577 specific PHY registers */ #define I82577_PHY_CTRL_2 18 @@ -95,13 +94,6 @@ static const u16 e1000_igp_2_cable_length_table[] = /* BM PHY Copper Specific Control 1 */ #define BM_CS_CTRL1 16 -/* BM PHY Copper Specific Status */ -#define BM_CS_STATUS 17 -#define BM_CS_STATUS_LINK_UP 0x0400 -#define BM_CS_STATUS_RESOLVED 0x0800 -#define BM_CS_STATUS_SPEED_MASK 0xC000 -#define BM_CS_STATUS_SPEED_1000 0x8000 - #define HV_MUX_DATA_CTRL PHY_REG(776, 16) #define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 #define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 @@ -164,16 +156,25 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) * MDIC mode. No harm in trying again in this case since * the PHY ID is unknown at this point anyway */ + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + goto out; ret_val = e1000_set_mdio_slow_mode_hv(hw, true); if (ret_val) goto out; + phy->ops.release_phy(hw); retry_count++; } out: /* Revert to MDIO fast mode, if applicable */ - if (retry_count) + if (retry_count) { + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + return ret_val; ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + phy->ops.release_phy(hw); + } return ret_val; } @@ -354,94 +355,173 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000e_read_phy_reg_igp - Read igp PHY register + * __e1000e_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphores before exiting. **/ -s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - - hw->phy.ops.release_phy(hw); + data); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** + * e1000e_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, true); +} + +/** * e1000e_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_read_kmrn_reg - Read kumeran register + * e1000e_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, true); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then reads the PHY register at offset * using the kumeran interface. The information retrieved is stored in data. * Release any acquired semaphores before exiting. **/ -s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; @@ -452,41 +532,111 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) kmrnctrlsta = er32(KMRNCTRLSTA); *data = (u16)kmrnctrlsta; - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_write_kmrn_reg - Write kumeran register + * e1000e_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000e_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, true); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then write the data to PHY register * at the offset using the kumeran interface. Release any acquired semaphores * before exiting. **/ -s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); udelay(2); - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); + +out: return ret_val; } /** + * e1000e_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000e_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + +/** * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link * @hw: pointer to the HW structure * @@ -509,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data); out: return ret_val; @@ -2105,6 +2246,10 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, @@ -2112,10 +2257,6 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2135,18 +2276,15 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2167,6 +2305,10 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, @@ -2174,10 +2316,6 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2197,17 +2335,14 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2226,17 +2361,17 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, true); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2245,16 +2380,14 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2272,17 +2405,17 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, false); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2290,17 +2423,15 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2320,6 +2451,8 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) * 3) Write the address using the address opcode (0x11) * 4) Read or write the data using the data opcode (0x12) * 5) Restore 769_17.2 to its original value + * + * Assumes semaphore already acquired. **/ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2327,20 +2460,12 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, s32 ret_val; u16 reg = BM_PHY_REG_NUM(offset); u16 phy_reg = 0; - u8 phy_acquired = 1; - /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2397,8 +2522,6 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } @@ -2439,52 +2562,63 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return 0; } +/** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + * @slow: true for slow mode, false for normal mode + * + * Assumes semaphore already acquired. + **/ s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) { s32 ret_val = 0; u16 data = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ hw->phy.addr = 1; ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; + ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, (0x2180 | (slow << 10))); + if (ret_val) + goto out; /* dummy read when reverting to fast mode - throw away result */ if (!slow) - e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - - hw->phy.ops.release_phy(hw); + ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); +out: return ret_val; } /** - * e1000_read_phy_reg_hv - Read HV PHY register + * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphore before exiting. **/ -s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2508,63 +2642,92 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) page = 0; if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; - - hw->phy.addr = 1; - - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } - hw->phy.addr = phy_addr; - } + u32 phy_addr = hw->phy.addr; + + hw->phy.addr = 1; + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); - out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); + + if (!locked) + hw->phy.ops.release_phy(hw); return ret_val; } /** - * e1000_write_phy_reg_hv - Write HV PHY register + * e1000_read_phy_reg_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores + * the retrieved information in data. Release the acquired semaphore + * before exiting. + **/ +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_read_phy_reg_hv_locked - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, true); +} + +/** + * __e1000_write_phy_reg_hv - Write HV PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2588,10 +2751,6 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2607,50 +2766,70 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) { u16 data2 = 0x7EFF; - hw->phy.ops.release_phy(hw); ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3, &data2, false); if (ret_val) goto out; - - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; } if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; - - hw->phy.addr = 1; - - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } - hw->phy.addr = phy_addr; - } + u32 phy_addr = hw->phy.addr; + + hw->phy.addr = 1; + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); + + if (!locked) + hw->phy.ops.release_phy(hw); return ret_val; } /** + * e1000_write_phy_reg_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register at the offset. + * Release the acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_write_phy_reg_hv_locked - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. Assumes semaphore + * already acquired. + **/ +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, true); +} + +/** * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page * @page: page to be accessed **/ @@ -2671,10 +2850,9 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page) * @data: pointer to the data to be read or written * @read: determines if operation is read or written * - * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retreived information in data. Release any acquired - * semaphores before exiting. Note that the procedure to read these regs - * uses the address port and data port to read/write. + * Reads the PHY register at offset and stores the retreived information + * in data. Assumes semaphore already acquired. Note that the procedure + * to read these regs uses the address port and data port to read/write. **/ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2682,20 +2860,12 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, s32 ret_val; u32 addr_reg = 0; u32 data_reg = 0; - u8 phy_acquired = 1; /* This takes care of the difference with desktop vs mobile phy */ addr_reg = (hw->phy.type == e1000_phy_82578) ? I82578_ADDR_REG : I82577_ADDR_REG; data_reg = addr_reg + 1; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - hw_dbg(hw, "Could not acquire PHY\n"); - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 2 */ hw->phy.addr = 2; @@ -2718,8 +2888,6 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, } out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } diff --git a/drivers/net/eql.c b/drivers/net/eql.c index d4d9a3eda69..f5b96cadeb2 100644 --- a/drivers/net/eql.c +++ b/drivers/net/eql.c @@ -111,6 +111,7 @@ * Sorry, I had to rewrite most of this for 2.5.x -DaveM */ +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index b7311bc0025..f7d9ac8324c 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -17,8 +17,13 @@ #include <linux/mii.h> #include <linux/phy.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <net/ethoc.h> +static int buffer_size = 0x8000; /* 32 KBytes */ +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); + /* register offsets */ #define MODER 0x00 #define INT_SOURCE 0x04 @@ -167,6 +172,7 @@ * struct ethoc - driver-private device structure * @iobase: pointer to I/O memory region * @membase: pointer to buffer memory region + * @dma_alloc: dma allocated buffer size * @num_tx: number of send buffers * @cur_tx: last send buffer written * @dty_tx: last buffer actually sent @@ -185,6 +191,7 @@ struct ethoc { void __iomem *iobase; void __iomem *membase; + int dma_alloc; unsigned int num_tx; unsigned int cur_tx; @@ -216,24 +223,25 @@ struct ethoc_bd { u32 addr; }; -static u32 ethoc_read(struct ethoc *dev, loff_t offset) +static inline u32 ethoc_read(struct ethoc *dev, loff_t offset) { return ioread32(dev->iobase + offset); } -static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) +static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) { iowrite32(data, dev->iobase + offset); } -static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd) +static inline void ethoc_read_bd(struct ethoc *dev, int index, + struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); bd->stat = ethoc_read(dev, offset + 0); bd->addr = ethoc_read(dev, offset + 4); } -static void ethoc_write_bd(struct ethoc *dev, int index, +static inline void ethoc_write_bd(struct ethoc *dev, int index, const struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); @@ -241,33 +249,33 @@ static void ethoc_write_bd(struct ethoc *dev, int index, ethoc_write(dev, offset + 4, bd->addr); } -static void ethoc_enable_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask |= mask; ethoc_write(dev, INT_MASK, imask); } -static void ethoc_disable_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask &= ~mask; ethoc_write(dev, INT_MASK, imask); } -static void ethoc_ack_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask) { ethoc_write(dev, INT_SOURCE, mask); } -static void ethoc_enable_rx_and_tx(struct ethoc *dev) +static inline void ethoc_enable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode |= MODER_RXEN | MODER_TXEN; ethoc_write(dev, MODER, mode); } -static void ethoc_disable_rx_and_tx(struct ethoc *dev) +static inline void ethoc_disable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode &= ~(MODER_RXEN | MODER_TXEN); @@ -284,7 +292,7 @@ static int ethoc_init_ring(struct ethoc *dev) dev->cur_rx = 0; /* setup transmission buffers */ - bd.addr = 0; + bd.addr = virt_to_phys(dev->membase); bd.stat = TX_BD_IRQ | TX_BD_CRC; for (i = 0; i < dev->num_tx; i++) { @@ -295,7 +303,6 @@ static int ethoc_init_ring(struct ethoc *dev) bd.addr += ETHOC_BUFSIZ; } - bd.addr = dev->num_tx * ETHOC_BUFSIZ; bd.stat = RX_BD_EMPTY | RX_BD_IRQ; for (i = 0; i < dev->num_rx; i++) { @@ -400,8 +407,12 @@ static int ethoc_rx(struct net_device *dev, int limit) if (ethoc_update_rx_stats(priv, &bd) == 0) { int size = bd.stat >> 16; struct sk_buff *skb = netdev_alloc_skb(dev, size); + + size -= 4; /* strip the CRC */ + skb_reserve(skb, 2); /* align TCP/IP header */ + if (likely(skb)) { - void *src = priv->membase + bd.addr; + void *src = phys_to_virt(bd.addr); memcpy_fromio(skb_put(skb, size), src, size); skb->protocol = eth_type_trans(skb, dev); priv->stats.rx_packets++; @@ -498,7 +509,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id) return IRQ_NONE; } - ethoc_ack_irq(priv, INT_MASK_ALL); + ethoc_ack_irq(priv, pending); if (pending & INT_MASK_BUSY) { dev_err(&dev->dev, "packet dropped\n"); @@ -653,9 +664,10 @@ static int ethoc_open(struct net_device *dev) if (ret) return ret; - /* calculate the number of TX/RX buffers */ - num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ; - priv->num_tx = min(min_tx, num_bd / 4); + /* calculate the number of TX/RX buffers, maximum 128 supported */ + num_bd = min_t(unsigned int, + 128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ); + priv->num_tx = max(min_tx, num_bd / 4); priv->num_rx = num_bd - priv->num_tx; ethoc_write(priv, TX_BD_NUM, priv->num_tx); @@ -823,7 +835,7 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev) else bd.stat &= ~TX_BD_PAD; - dest = priv->membase + bd.addr; + dest = phys_to_virt(bd.addr); memcpy_toio(dest, skb->data, skb->len); bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK); @@ -903,22 +915,19 @@ static int ethoc_probe(struct platform_device *pdev) /* obtain buffer memory space */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "cannot obtain memory space\n"); - ret = -ENXIO; - goto free; - } - - mem = devm_request_mem_region(&pdev->dev, res->start, + if (res) { + mem = devm_request_mem_region(&pdev->dev, res->start, res->end - res->start + 1, res->name); - if (!mem) { - dev_err(&pdev->dev, "cannot request memory space\n"); - ret = -ENXIO; - goto free; + if (!mem) { + dev_err(&pdev->dev, "cannot request memory space\n"); + ret = -ENXIO; + goto free; + } + + netdev->mem_start = mem->start; + netdev->mem_end = mem->end; } - netdev->mem_start = mem->start; - netdev->mem_end = mem->end; /* obtain device IRQ number */ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -933,6 +942,7 @@ static int ethoc_probe(struct platform_device *pdev) /* setup driver-private data */ priv = netdev_priv(netdev); priv->netdev = netdev; + priv->dma_alloc = 0; priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr, mmio->end - mmio->start + 1); @@ -942,12 +952,27 @@ static int ethoc_probe(struct platform_device *pdev) goto error; } - priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start, - mem->end - mem->start + 1); - if (!priv->membase) { - dev_err(&pdev->dev, "cannot remap memory space\n"); - ret = -ENXIO; - goto error; + if (netdev->mem_end) { + priv->membase = devm_ioremap_nocache(&pdev->dev, + netdev->mem_start, mem->end - mem->start + 1); + if (!priv->membase) { + dev_err(&pdev->dev, "cannot remap memory space\n"); + ret = -ENXIO; + goto error; + } + } else { + /* Allocate buffer memory */ + priv->membase = dma_alloc_coherent(NULL, + buffer_size, (void *)&netdev->mem_start, + GFP_KERNEL); + if (!priv->membase) { + dev_err(&pdev->dev, "cannot allocate %dB buffer\n", + buffer_size); + ret = -ENOMEM; + goto error; + } + netdev->mem_end = netdev->mem_start + buffer_size; + priv->dma_alloc = buffer_size; } /* Allow the platform setup code to pass in a MAC address. */ @@ -1034,6 +1059,9 @@ free_mdio: kfree(priv->mdio->irq); mdiobus_free(priv->mdio); free: + if (priv->dma_alloc) + dma_free_coherent(NULL, priv->dma_alloc, priv->membase, + netdev->mem_start); free_netdev(netdev); out: return ret; @@ -1059,7 +1087,9 @@ static int ethoc_remove(struct platform_device *pdev) kfree(priv->mdio->irq); mdiobus_free(priv->mdio); } - + if (priv->dma_alloc) + dma_free_coherent(NULL, priv->dma_alloc, priv->membase, + netdev->mem_start); unregister_netdev(netdev); free_netdev(netdev); } diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c index b2a5ec8f372..dd4ba01fd92 100644 --- a/drivers/net/ewrk3.c +++ b/drivers/net/ewrk3.c @@ -145,6 +145,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 29234380e6c..16a1d58419d 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1654,7 +1654,7 @@ static const struct net_device_ops fec_netdev_ops = { * * index is only used in legacy code */ -int __init fec_enet_init(struct net_device *dev, int index) +static int fec_enet_init(struct net_device *dev, int index) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *cbd_base; diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index c40113f5896..66dace6d324 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -759,12 +759,6 @@ static void mpc52xx_fec_reset(struct net_device *dev) mpc52xx_fec_hw_init(dev); - if (priv->phydev) { - phy_stop(priv->phydev); - phy_write(priv->phydev, MII_BMCR, BMCR_RESET); - phy_start(priv->phydev); - } - bcom_fec_rx_reset(priv->rx_dmatsk); bcom_fec_tx_reset(priv->tx_dmatsk); diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c index 31e6d62b785..ee0f3c6d3f8 100644 --- a/drivers/net/fec_mpc52xx_phy.c +++ b/drivers/net/fec_mpc52xx_phy.c @@ -155,6 +155,7 @@ static struct of_device_id mpc52xx_fec_mdio_match[] = { { .compatible = "mpc5200b-fec-phy", }, {} }; +MODULE_DEVICE_TABLE(of, mpc52xx_fec_mdio_match); struct of_platform_driver mpc52xx_fec_mdio_driver = { .name = "mpc5200b-fec-phy", diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0a1c2bb27d4..3116601dbfe 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -49,6 +49,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/ethtool.h> #include <linux/timer.h> @@ -5820,10 +5821,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr); dev_printk(KERN_ERR, &pci_dev->dev, "Please complain to your hardware vendor. Switching to a random MAC.\n"); - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x00; - dev->dev_addr[2] = 0x6c; - get_random_bytes(&dev->dev_addr[3], 3); + random_ether_addr(dev->dev_addr); } dprintk(KERN_DEBUG "%s: MAC Address %pM\n", diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 2bc2d2b2064..ec2f5034457 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1110,6 +1110,7 @@ static struct of_device_id fs_enet_match[] = { #endif {} }; +MODULE_DEVICE_TABLE(of, fs_enet_match); static struct of_platform_driver fs_enet_driver = { .name = "fs_enet", diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 93b481b0e3c..24ff9f43a62 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -221,6 +221,7 @@ static struct of_device_id fs_enet_mdio_bb_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, fs_enet_mdio_bb_match); static struct of_platform_driver fs_enet_bb_mdio_driver = { .name = "fsl-bb-mdio", diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c index a2d69c1cd07..96eba4280c5 100644 --- a/drivers/net/fs_enet/mii-fec.c +++ b/drivers/net/fs_enet/mii-fec.c @@ -219,6 +219,7 @@ static struct of_device_id fs_enet_mdio_fec_match[] = { #endif {}, }; +MODULE_DEVICE_TABLE(of, fs_enet_mdio_fec_match); static struct of_platform_driver fs_enet_fec_mdio_driver = { .name = "fsl-fec-mdio", diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index d167090248e..efbf67689ec 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -407,6 +407,7 @@ static struct of_device_id fsl_pq_mdio_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); static struct of_platform_driver fsl_pq_mdio_driver = { .name = "fsl-pq_mdio", @@ -426,3 +427,4 @@ void fsl_pq_mdio_exit(void) of_unregister_platform_driver(&fsl_pq_mdio_driver); } module_exit(fsl_pq_mdio_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 1e5289ffef6..5bf31f1509c 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2325,9 +2325,6 @@ static irqreturn_t gfar_error(int irq, void *dev_id) return IRQ_HANDLED; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:fsl-gianfar"); - static struct of_device_id gfar_match[] = { { @@ -2336,6 +2333,7 @@ static struct of_device_id gfar_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, gfar_match); /* Structure for a device driver */ static struct of_platform_driver gfar_driver = { diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 1d5064a09ac..f7519a59494 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -145,6 +145,7 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (5*HZ) +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 7bcaf7c6624..e344c84c0ef 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -44,6 +44,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/workqueue.h> #include <linux/fs.h> diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index aa4488e871b..ed60fd66427 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -71,6 +71,7 @@ /*****************************************************************************/ +#include <linux/capability.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 88c59359602..1686f6dcbbc 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -61,6 +61,7 @@ /*****************************************************************************/ +#include <linux/capability.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c index 0013c409782..91c5790c958 100644 --- a/drivers/net/hamradio/hdlcdrv.c +++ b/drivers/net/hamradio/hdlcdrv.c @@ -42,6 +42,7 @@ /*****************************************************************************/ +#include <linux/capability.h> #include <linux/module.h> #include <linux/types.h> #include <linux/net.h> diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 33b55f72974..db4b7f1603f 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -258,7 +258,7 @@ static void ax_bump(struct mkiss *ax) } if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) { printk(KERN_INFO - "mkiss: %s: Switchting to crc-smack\n", + "mkiss: %s: Switching to crc-smack\n", ax->dev->name); ax->crcmode = CRC_MODE_SMACK; } @@ -272,7 +272,7 @@ static void ax_bump(struct mkiss *ax) } if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { printk(KERN_INFO - "mkiss: %s: Switchting to crc-flexnet\n", + "mkiss: %s: Switching to crc-flexnet\n", ax->dev->name); ax->crcmode = CRC_MODE_FLEX; } diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index a9a1a99f02d..dd866513806 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -98,6 +98,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 89c82c5e63e..3fae8755979 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -24,6 +24,7 @@ * */ +#include <linux/module.h> #include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> @@ -443,7 +444,7 @@ static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_s ret |= EMAC_MR1_TFS_2K; break; default: - printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", dev->ndev->name, tx_size); } @@ -470,6 +471,9 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_ DBG2(dev, "__emac4_calc_base_mr1" NL); switch(tx_size) { + case 16384: + ret |= EMAC4_MR1_TFS_16K; + break; case 4096: ret |= EMAC4_MR1_TFS_4K; break; @@ -477,7 +481,7 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_ ret |= EMAC4_MR1_TFS_2K; break; default: - printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", + printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", dev->ndev->name, tx_size); } @@ -2985,6 +2989,7 @@ static struct of_device_id emac_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, emac_match); static struct of_platform_driver emac_driver = { .name = "emac", diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h index 0afc2cf5c52..8a61b597a16 100644 --- a/drivers/net/ibm_newemac/emac.h +++ b/drivers/net/ibm_newemac/emac.h @@ -153,6 +153,7 @@ struct emac_regs { #define EMAC4_MR1_RFS_16K 0x00280000 #define EMAC4_MR1_TFS_2K 0x00020000 #define EMAC4_MR1_TFS_4K 0x00030000 +#define EMAC4_MR1_TFS_16K 0x00050000 #define EMAC4_MR1_TR 0x00008000 #define EMAC4_MR1_MWSW_001 0x00001000 #define EMAC4_MR1_JPSM 0x00000800 @@ -262,8 +263,8 @@ struct emac_regs { /* EMACx_TRTR */ -#define EMAC_TRTR_SHIFT_EMAC4 27 -#define EMAC_TRTR_SHIFT 24 +#define EMAC_TRTR_SHIFT_EMAC4 24 +#define EMAC_TRTR_SHIFT 27 /* EMAC specific TX descriptor control fields (write access) */ #define EMAC_TX_CTRL_GFCS 0x0200 diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 801f088c134..030913f8bd2 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -98,12 +98,13 @@ static void ri_tasklet(unsigned long dev) stats->tx_packets++; stats->tx_bytes +=skb->len; - skb->dev = __dev_get_by_index(&init_net, skb->iif); + skb->dev = dev_get_by_index(&init_net, skb->iif); if (!skb->dev) { dev_kfree_skb(skb); stats->tx_dropped++; break; } + dev_put(skb->dev); skb->iif = _dev->ifindex; if (from & AT_EGRESS) { diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index d004c359244..b243ed3b0c3 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -34,6 +34,7 @@ #include <linux/interrupt.h> #include <linux/if_ether.h> #include <linux/ethtool.h> +#include <linux/sched.h> #include "igb.h" @@ -731,7 +732,7 @@ static int igb_set_ringparam(struct net_device *netdev, { struct igb_adapter *adapter = netdev_priv(netdev); struct igb_ring *temp_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -751,18 +752,30 @@ static int igb_set_ringparam(struct net_device *netdev, return 0; } + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + if (adapter->num_tx_queues > adapter->num_rx_queues) temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); else temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - msleep(1); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } - if (netif_running(adapter->netdev)) - igb_down(adapter); + igb_down(adapter); /* * We can't just free everything and then setup again, @@ -819,14 +832,11 @@ static int igb_set_ringparam(struct net_device *netdev, adapter->rx_ring_count = new_rx_count; } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igb_up(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); + igb_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGB_RESETTING, &adapter->state); return err; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 5d6c1530a8c..714c3a4a44e 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1246,12 +1246,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (err) goto err_pci_reg; - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } + pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); pci_save_state(pdev); @@ -1628,7 +1623,6 @@ static void __devexit igb_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - int err; /* flush_scheduled work may reschedule our watchdog task, so * explicitly disable watchdog tasks from being rescheduled */ @@ -1682,10 +1676,7 @@ static void __devexit igb_remove(struct pci_dev *pdev) free_netdev(netdev); - err = pci_disable_pcie_error_reporting(pdev); - if (err) - dev_err(&pdev->dev, - "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c index ee17a097d1c..c68265bd0d1 100644 --- a/drivers/net/igbvf/ethtool.c +++ b/drivers/net/igbvf/ethtool.c @@ -279,7 +279,7 @@ static int igbvf_set_ringparam(struct net_device *netdev, { struct igbvf_adapter *adapter = netdev_priv(netdev); struct igbvf_ring *temp_ring; - int err; + int err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -299,15 +299,22 @@ static int igbvf_set_ringparam(struct net_device *netdev, return 0; } - temp_ring = vmalloc(sizeof(struct igbvf_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) msleep(1); - if (netif_running(adapter->netdev)) - igbvf_down(adapter); + if (!netif_running(adapter->netdev)) { + adapter->tx_ring->count = new_tx_count; + adapter->rx_ring->count = new_rx_count; + goto clear_reset; + } + + temp_ring = vmalloc(sizeof(struct igbvf_ring)); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + igbvf_down(adapter); /* * We can't just free everything and then setup again, @@ -339,14 +346,11 @@ static int igbvf_set_ringparam(struct net_device *netdev, memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring)); } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igbvf_up(adapter); - - clear_bit(__IGBVF_RESETTING, &adapter->state); + igbvf_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGBVF_RESETTING, &adapter->state); return err; } diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index 38bf7cf2256..c412e802617 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -232,8 +232,11 @@ static int sa1100_irda_startup(struct sa1100_irda *si) /* * Ensure that the ports for this device are setup correctly. */ - if (si->pdata->startup) - si->pdata->startup(si->dev); + if (si->pdata->startup) { + ret = si->pdata->startup(si->dev); + if (ret) + return ret; + } /* * Configure PPC for IRDA - we want to drive TXD2 low. diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c index fcf287b749d..99e1ec02a01 100644 --- a/drivers/net/irda/toim3232-sir.c +++ b/drivers/net/irda/toim3232-sir.c @@ -120,6 +120,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/sched.h> #include <net/irda/irda.h> diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index e36e951cbc6..aa7286bc436 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -495,7 +495,7 @@ static void veth_take_cap_ack(struct veth_lpar_connection *cnx, cnx->remote_lp); } else { memcpy(&cnx->cap_ack_event, event, - sizeof(&cnx->cap_ack_event)); + sizeof(cnx->cap_ack_event)); cnx->state |= VETH_STATE_GOTCAPACK; veth_kick_statemachine(cnx); } diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 56b12f3192f..e2d5343f127 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -425,7 +425,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) #endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = -IXGBE_ERR_CONFIG; + ret_val = IXGBE_ERR_CONFIG; goto out; break; } diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 2ec58dcdb82..34b04924c8a 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -330,6 +330,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: case IXGBE_DEV_ID_82599_XAUI_LOM: /* Default device ID is mezzanine card KX/KX4 */ media_type = ixgbe_media_type_backplane; diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 6621e172df3..40ff120a9ad 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1355,9 +1355,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) /** * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses * @hw: pointer to hardware structure - * @addr_list: the list of new addresses - * @addr_count: number of addresses - * @next: iterator function to walk the address list + * @uc_list: the list of new addresses * * The given list replaces any existing list. Clears the secondary addrs from * receive address registers. Uses unused receive address registers for the @@ -1663,7 +1661,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num) #endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = -IXGBE_ERR_CONFIG; + ret_val = IXGBE_ERR_CONFIG; goto out; break; } @@ -1734,75 +1732,140 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw) s32 ret_val = 0; ixgbe_link_speed speed; u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; + u32 links2, anlp1_reg, autoc_reg, links; bool link_up; /* * AN should have completed when the cable was plugged in. * Look for reasons to bail out. Bail out if: * - FC autoneg is disabled, or if - * - we don't have multispeed fiber, or if - * - we're not running at 1G, or if - * - link is not up, or if - * - link is up but AN did not complete, or if - * - link is up and AN completed but timed out + * - link is not up. * - * Since we're being called from an LSC, link is already know to be up. + * Since we're being called from an LSC, link is already known to be up. * So use link_up_wait_to_complete=false. */ hw->mac.ops.check_link(hw, &speed, &link_up, false); - linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); - - if (hw->fc.disable_fc_autoneg || - !hw->phy.multispeed_fiber || - (speed != IXGBE_LINK_SPEED_1GB_FULL) || - !link_up || - ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || - ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { + + if (hw->fc.disable_fc_autoneg || (!link_up)) { hw->fc.fc_was_autonegged = false; hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "Autoneg FC was skipped.\n"); goto out; } /* + * On backplane, bail out if + * - backplane autoneg was not completed, or if + * - link partner is not AN enabled + */ + if (hw->phy.media_type == ixgbe_media_type_backplane) { + links = IXGBE_READ_REG(hw, IXGBE_LINKS); + links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); + if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) || + ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + goto out; + } + } + + /* + * On multispeed fiber at 1g, bail out if + * - link is up but AN did not complete, or if + * - link is up and AN completed but timed out + */ + if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) { + linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || + ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + goto out; + } + } + + /* * Read the AN advertisement and LP ability registers and resolve * local flow control settings accordingly */ - pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); - if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) { + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (hw->phy.media_type != ixgbe_media_type_backplane)) { + pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control=RX PAUSE only\n"); + } + } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && + !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && + (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); + } + } + + if (hw->phy.media_type == ixgbe_media_type_backplane) { /* - * Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. + * Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly */ - if (hw->fc.requested_mode == ixgbe_fc_full) { - hw->fc.current_mode = ixgbe_fc_full; - hw_dbg(hw, "Flow Control = FULL.\n"); - } else { + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); + + if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control=RX PAUSE only\n"); + } + } else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) && + (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) && + (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) && + !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) && + (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) { hw->fc.current_mode = ixgbe_fc_rx_pause; hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); } - } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { - hw->fc.current_mode = ixgbe_fc_tx_pause; - hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); - } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) && - !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) && - (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) { - hw->fc.current_mode = ixgbe_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); - } else { - hw->fc.current_mode = ixgbe_fc_none; - hw_dbg(hw, "Flow Control = NONE.\n"); } - /* Record that current_mode is the result of a successful autoneg */ hw->fc.fc_was_autonegged = true; @@ -1919,7 +1982,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) #endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = -IXGBE_ERR_CONFIG; + ret_val = IXGBE_ERR_CONFIG; goto out; break; } @@ -1927,9 +1990,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); - /* Enable and restart autoneg to inform the link partner */ - reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART; - /* Disable AN timeout */ if (hw->fc.strict_ieee) reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; @@ -1937,6 +1997,70 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); + /* + * Set up the 10G flow control advertisement registers so the HW + * can do fc autoneg once the cable is plugged in. If we end up + * using 1g instead, this is harmless. + */ + reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + /* + * The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE); + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + reg |= (IXGBE_AUTOC_ASM_PAUSE); + reg &= ~(IXGBE_AUTOC_SYM_PAUSE); + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE); + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif /* CONFIG_DCB */ + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + /* + * AUTOC restart handles negotiation of 1G and 10G. There is + * no need to set the PCS1GCTL register. + */ + reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg); + hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); + out: return ret_val; } @@ -2000,7 +2124,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) while (timeout) { if (ixgbe_get_eeprom_semaphore(hw)) - return -IXGBE_ERR_SWFW_SYNC; + return IXGBE_ERR_SWFW_SYNC; gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); if (!(gssr & (fwmask | swmask))) @@ -2017,7 +2141,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) if (!timeout) { hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n"); - return -IXGBE_ERR_SWFW_SYNC; + return IXGBE_ERR_SWFW_SYNC; } gssr |= swmask; diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 53b0a668025..856c18c207f 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -53,6 +53,10 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = { {"tx_packets", IXGBE_STAT(net_stats.tx_packets)}, {"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)}, {"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)}, + {"rx_pkts_nic", IXGBE_STAT(stats.gprc)}, + {"tx_pkts_nic", IXGBE_STAT(stats.gptc)}, + {"rx_bytes_nic", IXGBE_STAT(stats.gorc)}, + {"tx_bytes_nic", IXGBE_STAT(stats.gotc)}, {"lsc_int", IXGBE_STAT(lsc_int)}, {"tx_busy", IXGBE_STAT(tx_busy)}, {"non_eop_descs", IXGBE_STAT(non_eop_descs)}, @@ -794,7 +798,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_ring *temp_tx_ring, *temp_rx_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; bool need_update = false; @@ -818,6 +822,16 @@ static int ixgbe_set_ringparam(struct net_device *netdev, while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) msleep(1); + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto err_setup; + } + temp_tx_ring = kcalloc(adapter->num_tx_queues, sizeof(struct ixgbe_ring), GFP_KERNEL); if (!temp_tx_ring) { @@ -875,8 +889,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, /* if rings need to be updated, here's the place to do it in one shot */ if (need_update) { - if (netif_running(netdev)) - ixgbe_down(adapter); + ixgbe_down(adapter); /* tx */ if (new_tx_count != adapter->tx_ring_count) { @@ -893,13 +906,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev, temp_rx_ring = NULL; adapter->rx_ring_count = new_rx_count; } - } - - /* success! */ - err = 0; - if (netif_running(netdev)) ixgbe_up(adapter); - + } err_setup: clear_bit(__IXGBE_RESETTING, &adapter->state); return err; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index c407bd9de0d..a456578b857 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -44,12 +44,13 @@ #include "ixgbe.h" #include "ixgbe_common.h" +#include "ixgbe_dcb_82599.h" char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; -#define DRV_VERSION "2.0.37-k2" +#define DRV_VERSION "2.0.44-k2" const char ixgbe_driver_version[] = DRV_VERSION; static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation."; @@ -97,8 +98,12 @@ static struct pci_device_id ixgbe_pci_tbl[] = { board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), + board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), + board_82599 }, /* required last entry */ {0, } @@ -222,6 +227,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, /* tx_buffer_info must be completely set up in the transmit path */ } +/** + * ixgbe_tx_is_paused - check if the tx ring is paused + * @adapter: the ixgbe adapter + * @tx_ring: the corresponding tx_ring + * + * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the + * corresponding TC of this tx_ring when checking TFCS. + * + * Returns : true if paused + */ +static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + u32 txoff = IXGBE_TFCS_TXOFF; + +#ifdef CONFIG_IXGBE_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int tc; + int reg_idx = tx_ring->reg_idx; + int dcb_i = adapter->ring_feature[RING_F_DCB].indices; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + tc = reg_idx >> 2; + txoff = IXGBE_TFCS_TXOFF0; + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + tc = 0; + txoff = IXGBE_TFCS_TXOFF; + if (dcb_i == 8) { + /* TC0, TC1 */ + tc = reg_idx >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 64) >> 4; + else if (tc == 3) /* TC4, TC5, TC6, TC7 */ + tc += 1 + ((reg_idx - 96) >> 3); + } else if (dcb_i == 4) { + /* TC0, TC1 */ + tc = reg_idx >> 6; + if (tc == 1) { + tc += (reg_idx - 64) >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 96) >> 4; + } + } + } + txoff <<= tc; + } +#endif + return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff; +} + static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, unsigned int eop) @@ -233,7 +288,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, adapter->detect_tx_hung = false; if (tx_ring->tx_buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && - !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { + !ixgbe_tx_is_paused(adapter, tx_ring)) { /* detected Tx unit hang */ union ixgbe_adv_tx_desc *tx_desc; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); @@ -408,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, u32 txctrl; int cpu = get_cpu(); int q = tx_ring - adapter->tx_ring; + struct ixgbe_hw *hw = &adapter->hw; if (tx_ring->cpu != cpu) { - txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl); } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << - IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl); } - txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); tx_ring->cpu = cpu; } put_cpu(); @@ -1885,18 +1944,49 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0); adapter->tx_ring[i].head = IXGBE_TDH(j); adapter->tx_ring[i].tail = IXGBE_TDT(j); - /* Disable Tx Head Writeback RO bit, since this hoses + /* + * Disable Tx Head Writeback RO bit, since this hoses * bookkeeping if things aren't delivered in order. */ - txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j)); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j)); + break; + case ixgbe_mac_82599EB: + default: + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j)); + break; + } txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl); + break; + case ixgbe_mac_82599EB: + default: + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl); + break; + } } + if (hw->mac.type == ixgbe_mac_82599EB) { + u32 rttdcs; + + /* disable the arbiter while setting MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + /* We enable 8 traffic classes, DCB only */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ)); + else + IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB); + + /* re-eable the arbiter */ + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); } } @@ -2450,7 +2540,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) ixgbe_restore_vlan(adapter); #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - netif_set_gso_max_size(netdev, 32768); + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(netdev, 32768); + else + netif_set_gso_max_size(netdev, 65536); ixgbe_configure_dcb(adapter); } else { netif_set_gso_max_size(netdev, 65536); @@ -4432,10 +4525,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) /* 82598 hardware only has a 32 bit counter in the high register */ if (hw->mac.type == ixgbe_mac_82599EB) { + u64 tmp; adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); - IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ + tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF; /* 4 high bits of GORC */ + adapter->stats.gorc += (tmp << 32); adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); - IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ + tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF; /* 4 high bits of GOTC */ + adapter->stats.gotc += (tmp << 32); adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL); IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); @@ -5071,7 +5167,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb, /* Right now, we support IPv4 only */ struct ixgbe_atr_input atr_input; struct tcphdr *th; - struct udphdr *uh; struct iphdr *iph = ip_hdr(skb); struct ethhdr *eth = (struct ethhdr *)skb->data; u16 vlan_id, src_port, dst_port, flex_bytes; @@ -5085,12 +5180,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb, dst_port = th->dest; l4type |= IXGBE_ATR_L4TYPE_TCP; /* l4type IPv4 type is 0, no need to assign */ - } else if(iph->protocol == IPPROTO_UDP) { - uh = udp_hdr(skb); - src_port = uh->source; - dst_port = uh->dest; - l4type |= IXGBE_ATR_L4TYPE_UDP; - /* l4type IPv4 type is 0, no need to assign */ } else { /* Unsupported L4 header, just bail here */ return; @@ -5494,12 +5583,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_pci_reg; } - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } + pci_enable_pcie_error_reporting(pdev); pci_set_master(pdev); pci_save_state(pdev); @@ -5808,7 +5892,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbe_adapter *adapter = netdev_priv(netdev); - int err; set_bit(__IXGBE_DOWN, &adapter->state); /* clear the module not found bit to make sure the worker won't @@ -5859,10 +5942,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) free_netdev(netdev); - err = pci_disable_pcie_error_reporting(pdev); - if (err) - dev_err(&pdev->dev, - "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); } @@ -5914,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) } else { pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); pci_wake_from_d3(pdev, false); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 8761d7899f7..ef4bdd58e01 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -49,9 +49,11 @@ #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 #define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 #define IXGBE_DEV_ID_82599_KX4 0x10F7 +#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514 #define IXGBE_DEV_ID_82599_CX4 0x10F9 #define IXGBE_DEV_ID_82599_SFP 0x10FB #define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC +#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8 /* General Registers */ #define IXGBE_CTRL 0x00000 @@ -1336,6 +1338,8 @@ #define IXGBE_AUTOC_KX4_SUPP 0x80000000 #define IXGBE_AUTOC_KX_SUPP 0x40000000 #define IXGBE_AUTOC_PAUSE 0x30000000 +#define IXGBE_AUTOC_ASM_PAUSE 0x20000000 +#define IXGBE_AUTOC_SYM_PAUSE 0x10000000 #define IXGBE_AUTOC_RF 0x08000000 #define IXGBE_AUTOC_PD_TMR 0x06000000 #define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 @@ -1404,6 +1408,8 @@ #define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */ #define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040 + /* PCS1GLSTA Bit Masks */ #define IXGBE_PCS1GLSTA_LINK_OK 1 #define IXGBE_PCS1GLSTA_SYNK_OK 0x10 @@ -1424,6 +1430,11 @@ #define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000 #define IXGBE_PCS1GLCTL_AN_RESTART 0x20000 +/* ANLP1 Bit Masks */ +#define IXGBE_ANLP1_PAUSE 0x0C00 +#define IXGBE_ANLP1_SYM_PAUSE 0x0400 +#define IXGBE_ANLP1_ASM_PAUSE 0x0800 + /* SW Semaphore Register bitmasks */ #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index b02a981c87a..34a6cfd1793 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -119,24 +119,9 @@ static struct ixp2400_msf_parameters enp2611_msf_parameters = } }; -struct enp2611_ixpdev_priv -{ - struct ixpdev_priv ixpdev_priv; - struct net_device_stats stats; -}; - static struct net_device *nds[3]; static struct timer_list link_check_timer; -static struct net_device_stats *enp2611_get_stats(struct net_device *dev) -{ - struct enp2611_ixpdev_priv *ip = netdev_priv(dev); - - pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats)); - - return &(ip->stats); -} - /* @@@ Poll the SFP moddef0 line too. */ /* @@@ Try to use the pm3386 DOOL interrupt as well. */ static void enp2611_check_link_status(unsigned long __dummy) @@ -203,14 +188,13 @@ static int __init enp2611_init_module(void) ports = pm3386_port_count(); for (i = 0; i < ports; i++) { - nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv)); + nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); if (nds[i] == NULL) { while (--i >= 0) free_netdev(nds[i]); return -ENOMEM; } - nds[i]->get_stats = enp2611_get_stats; pm3386_init_port(i); pm3386_get_mac(i, nds[i]->dev_addr); } diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 127243461a5..9aee0cc922c 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -21,6 +21,7 @@ #include "ixp2400_tx.ucode" #include "ixpdev_priv.h" #include "ixpdev.h" +#include "pm3386.h" #define DRV_MODULE_VERSION "0.2" @@ -271,6 +272,15 @@ static int ixpdev_close(struct net_device *dev) return 0; } +static struct net_device_stats *ixpdev_get_stats(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + + pm3386_get_stats(ip->channel, &(dev->stats)); + + return &(dev->stats); +} + static const struct net_device_ops ixpdev_netdev_ops = { .ndo_open = ixpdev_open, .ndo_stop = ixpdev_close, @@ -278,6 +288,7 @@ static const struct net_device_ops ixpdev_netdev_ops = { .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, + .ndo_get_stats = ixpdev_get_stats, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ixpdev_poll_controller, #endif diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 23783586435..a23f739d222 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -171,6 +171,36 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val) } /** + * ks8851_wrreg8 - write 8bit register value to chip + * @ks: The chip state + * @reg: The register address + * @val: The value to write + * + * Issue a write to put the value @val into the register specified in @reg. + */ +static void ks8851_wrreg8(struct ks8851_net *ks, unsigned reg, unsigned val) +{ + struct spi_transfer *xfer = &ks->spi_xfer1; + struct spi_message *msg = &ks->spi_msg1; + __le16 txb[2]; + int ret; + int bit; + + bit = 1 << (reg & 3); + + txb[0] = cpu_to_le16(MK_OP(bit, reg) | KS_SPIOP_WR); + txb[1] = val; + + xfer->tx_buf = txb; + xfer->rx_buf = NULL; + xfer->len = 3; + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "spi_sync() failed\n"); +} + +/** * ks8851_rx_1msg - select whether to use one or two messages for spi read * @ks: The device structure * @@ -322,13 +352,12 @@ static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op) static int ks8851_write_mac_addr(struct net_device *dev) { struct ks8851_net *ks = netdev_priv(dev); - u16 *mcp = (u16 *)dev->dev_addr; + int i; mutex_lock(&ks->lock); - ks8851_wrreg16(ks, KS_MARL, mcp[0]); - ks8851_wrreg16(ks, KS_MARM, mcp[1]); - ks8851_wrreg16(ks, KS_MARH, mcp[2]); + for (i = 0; i < ETH_ALEN; i++) + ks8851_wrreg8(ks, KS_MAR(i), dev->dev_addr[i]); mutex_unlock(&ks->lock); @@ -951,7 +980,7 @@ static void ks8851_set_rx_mode(struct net_device *dev) mcptr = mcptr->next; } - rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA; + rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA; } else { /* just accept broadcast / unicast */ rxctrl.rxcr1 = RXCR1_RXPAFMA; @@ -1239,6 +1268,9 @@ static int __devinit ks8851_probe(struct spi_device *spi) ndev->netdev_ops = &ks8851_netdev_ops; ndev->irq = spi->irq; + /* issue a global soft reset to reset the device. */ + ks8851_soft_reset(ks, GRR_GSR); + /* simple check for a valid chip being connected to the bus */ if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h index 85abe147afb..f52c312cc35 100644 --- a/drivers/net/ks8851.h +++ b/drivers/net/ks8851.h @@ -16,6 +16,7 @@ #define CCR_32PIN (1 << 0) /* MAC address registers */ +#define KS_MAR(_m) 0x15 - (_m) #define KS_MARL 0x10 #define KS_MARM 0x12 #define KS_MARH 0x14 diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c new file mode 100644 index 00000000000..c146304d8d6 --- /dev/null +++ b/drivers/net/ks8851_mll.c @@ -0,0 +1,1691 @@ +/** + * drivers/net/ks8851_mll.c + * Copyright (c) 2009 Micrel Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/** + * Supports: + * KS8851 16bit MLL chip from Micrel Inc. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/cache.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#define DRV_NAME "ks8851_mll" + +static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 }; +#define MAX_RECV_FRAMES 32 +#define MAX_BUF_SIZE 2048 +#define TX_BUF_SIZE 2000 +#define RX_BUF_SIZE 2000 + +#define KS_CCR 0x08 +#define CCR_EEPROM (1 << 9) +#define CCR_SPI (1 << 8) +#define CCR_8BIT (1 << 7) +#define CCR_16BIT (1 << 6) +#define CCR_32BIT (1 << 5) +#define CCR_SHARED (1 << 4) +#define CCR_32PIN (1 << 0) + +/* MAC address registers */ +#define KS_MARL 0x10 +#define KS_MARM 0x12 +#define KS_MARH 0x14 + +#define KS_OBCR 0x20 +#define OBCR_ODS_16MA (1 << 6) + +#define KS_EEPCR 0x22 +#define EEPCR_EESA (1 << 4) +#define EEPCR_EESB (1 << 3) +#define EEPCR_EEDO (1 << 2) +#define EEPCR_EESCK (1 << 1) +#define EEPCR_EECS (1 << 0) + +#define KS_MBIR 0x24 +#define MBIR_TXMBF (1 << 12) +#define MBIR_TXMBFA (1 << 11) +#define MBIR_RXMBF (1 << 4) +#define MBIR_RXMBFA (1 << 3) + +#define KS_GRR 0x26 +#define GRR_QMU (1 << 1) +#define GRR_GSR (1 << 0) + +#define KS_WFCR 0x2A +#define WFCR_MPRXE (1 << 7) +#define WFCR_WF3E (1 << 3) +#define WFCR_WF2E (1 << 2) +#define WFCR_WF1E (1 << 1) +#define WFCR_WF0E (1 << 0) + +#define KS_WF0CRC0 0x30 +#define KS_WF0CRC1 0x32 +#define KS_WF0BM0 0x34 +#define KS_WF0BM1 0x36 +#define KS_WF0BM2 0x38 +#define KS_WF0BM3 0x3A + +#define KS_WF1CRC0 0x40 +#define KS_WF1CRC1 0x42 +#define KS_WF1BM0 0x44 +#define KS_WF1BM1 0x46 +#define KS_WF1BM2 0x48 +#define KS_WF1BM3 0x4A + +#define KS_WF2CRC0 0x50 +#define KS_WF2CRC1 0x52 +#define KS_WF2BM0 0x54 +#define KS_WF2BM1 0x56 +#define KS_WF2BM2 0x58 +#define KS_WF2BM3 0x5A + +#define KS_WF3CRC0 0x60 +#define KS_WF3CRC1 0x62 +#define KS_WF3BM0 0x64 +#define KS_WF3BM1 0x66 +#define KS_WF3BM2 0x68 +#define KS_WF3BM3 0x6A + +#define KS_TXCR 0x70 +#define TXCR_TCGICMP (1 << 8) +#define TXCR_TCGUDP (1 << 7) +#define TXCR_TCGTCP (1 << 6) +#define TXCR_TCGIP (1 << 5) +#define TXCR_FTXQ (1 << 4) +#define TXCR_TXFCE (1 << 3) +#define TXCR_TXPE (1 << 2) +#define TXCR_TXCRC (1 << 1) +#define TXCR_TXE (1 << 0) + +#define KS_TXSR 0x72 +#define TXSR_TXLC (1 << 13) +#define TXSR_TXMC (1 << 12) +#define TXSR_TXFID_MASK (0x3f << 0) +#define TXSR_TXFID_SHIFT (0) +#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f) + + +#define KS_RXCR1 0x74 +#define RXCR1_FRXQ (1 << 15) +#define RXCR1_RXUDPFCC (1 << 14) +#define RXCR1_RXTCPFCC (1 << 13) +#define RXCR1_RXIPFCC (1 << 12) +#define RXCR1_RXPAFMA (1 << 11) +#define RXCR1_RXFCE (1 << 10) +#define RXCR1_RXEFE (1 << 9) +#define RXCR1_RXMAFMA (1 << 8) +#define RXCR1_RXBE (1 << 7) +#define RXCR1_RXME (1 << 6) +#define RXCR1_RXUE (1 << 5) +#define RXCR1_RXAE (1 << 4) +#define RXCR1_RXINVF (1 << 1) +#define RXCR1_RXE (1 << 0) +#define RXCR1_FILTER_MASK (RXCR1_RXINVF | RXCR1_RXAE | \ + RXCR1_RXMAFMA | RXCR1_RXPAFMA) + +#define KS_RXCR2 0x76 +#define RXCR2_SRDBL_MASK (0x7 << 5) +#define RXCR2_SRDBL_SHIFT (5) +#define RXCR2_SRDBL_4B (0x0 << 5) +#define RXCR2_SRDBL_8B (0x1 << 5) +#define RXCR2_SRDBL_16B (0x2 << 5) +#define RXCR2_SRDBL_32B (0x3 << 5) +/* #define RXCR2_SRDBL_FRAME (0x4 << 5) */ +#define RXCR2_IUFFP (1 << 4) +#define RXCR2_RXIUFCEZ (1 << 3) +#define RXCR2_UDPLFE (1 << 2) +#define RXCR2_RXICMPFCC (1 << 1) +#define RXCR2_RXSAF (1 << 0) + +#define KS_TXMIR 0x78 + +#define KS_RXFHSR 0x7C +#define RXFSHR_RXFV (1 << 15) +#define RXFSHR_RXICMPFCS (1 << 13) +#define RXFSHR_RXIPFCS (1 << 12) +#define RXFSHR_RXTCPFCS (1 << 11) +#define RXFSHR_RXUDPFCS (1 << 10) +#define RXFSHR_RXBF (1 << 7) +#define RXFSHR_RXMF (1 << 6) +#define RXFSHR_RXUF (1 << 5) +#define RXFSHR_RXMR (1 << 4) +#define RXFSHR_RXFT (1 << 3) +#define RXFSHR_RXFTL (1 << 2) +#define RXFSHR_RXRF (1 << 1) +#define RXFSHR_RXCE (1 << 0) +#define RXFSHR_ERR (RXFSHR_RXCE | RXFSHR_RXRF |\ + RXFSHR_RXFTL | RXFSHR_RXMR |\ + RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\ + RXFSHR_RXTCPFCS) +#define KS_RXFHBCR 0x7E +#define RXFHBCR_CNT_MASK 0x0FFF + +#define KS_TXQCR 0x80 +#define TXQCR_AETFE (1 << 2) +#define TXQCR_TXQMAM (1 << 1) +#define TXQCR_METFE (1 << 0) + +#define KS_RXQCR 0x82 +#define RXQCR_RXDTTS (1 << 12) +#define RXQCR_RXDBCTS (1 << 11) +#define RXQCR_RXFCTS (1 << 10) +#define RXQCR_RXIPHTOE (1 << 9) +#define RXQCR_RXDTTE (1 << 7) +#define RXQCR_RXDBCTE (1 << 6) +#define RXQCR_RXFCTE (1 << 5) +#define RXQCR_ADRFE (1 << 4) +#define RXQCR_SDA (1 << 3) +#define RXQCR_RRXEF (1 << 0) +#define RXQCR_CMD_CNTL (RXQCR_RXFCTE|RXQCR_ADRFE) + +#define KS_TXFDPR 0x84 +#define TXFDPR_TXFPAI (1 << 14) +#define TXFDPR_TXFP_MASK (0x7ff << 0) +#define TXFDPR_TXFP_SHIFT (0) + +#define KS_RXFDPR 0x86 +#define RXFDPR_RXFPAI (1 << 14) + +#define KS_RXDTTR 0x8C +#define KS_RXDBCTR 0x8E + +#define KS_IER 0x90 +#define KS_ISR 0x92 +#define IRQ_LCI (1 << 15) +#define IRQ_TXI (1 << 14) +#define IRQ_RXI (1 << 13) +#define IRQ_RXOI (1 << 11) +#define IRQ_TXPSI (1 << 9) +#define IRQ_RXPSI (1 << 8) +#define IRQ_TXSAI (1 << 6) +#define IRQ_RXWFDI (1 << 5) +#define IRQ_RXMPDI (1 << 4) +#define IRQ_LDI (1 << 3) +#define IRQ_EDI (1 << 2) +#define IRQ_SPIBEI (1 << 1) +#define IRQ_DEDI (1 << 0) + +#define KS_RXFCTR 0x9C +#define RXFCTR_THRESHOLD_MASK 0x00FF + +#define KS_RXFC 0x9D +#define RXFCTR_RXFC_MASK (0xff << 8) +#define RXFCTR_RXFC_SHIFT (8) +#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff) +#define RXFCTR_RXFCT_MASK (0xff << 0) +#define RXFCTR_RXFCT_SHIFT (0) + +#define KS_TXNTFSR 0x9E + +#define KS_MAHTR0 0xA0 +#define KS_MAHTR1 0xA2 +#define KS_MAHTR2 0xA4 +#define KS_MAHTR3 0xA6 + +#define KS_FCLWR 0xB0 +#define KS_FCHWR 0xB2 +#define KS_FCOWR 0xB4 + +#define KS_CIDER 0xC0 +#define CIDER_ID 0x8870 +#define CIDER_REV_MASK (0x7 << 1) +#define CIDER_REV_SHIFT (1) +#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7) + +#define KS_CGCR 0xC6 +#define KS_IACR 0xC8 +#define IACR_RDEN (1 << 12) +#define IACR_TSEL_MASK (0x3 << 10) +#define IACR_TSEL_SHIFT (10) +#define IACR_TSEL_MIB (0x3 << 10) +#define IACR_ADDR_MASK (0x1f << 0) +#define IACR_ADDR_SHIFT (0) + +#define KS_IADLR 0xD0 +#define KS_IAHDR 0xD2 + +#define KS_PMECR 0xD4 +#define PMECR_PME_DELAY (1 << 14) +#define PMECR_PME_POL (1 << 12) +#define PMECR_WOL_WAKEUP (1 << 11) +#define PMECR_WOL_MAGICPKT (1 << 10) +#define PMECR_WOL_LINKUP (1 << 9) +#define PMECR_WOL_ENERGY (1 << 8) +#define PMECR_AUTO_WAKE_EN (1 << 7) +#define PMECR_WAKEUP_NORMAL (1 << 6) +#define PMECR_WKEVT_MASK (0xf << 2) +#define PMECR_WKEVT_SHIFT (2) +#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf) +#define PMECR_WKEVT_ENERGY (0x1 << 2) +#define PMECR_WKEVT_LINK (0x2 << 2) +#define PMECR_WKEVT_MAGICPKT (0x4 << 2) +#define PMECR_WKEVT_FRAME (0x8 << 2) +#define PMECR_PM_MASK (0x3 << 0) +#define PMECR_PM_SHIFT (0) +#define PMECR_PM_NORMAL (0x0 << 0) +#define PMECR_PM_ENERGY (0x1 << 0) +#define PMECR_PM_SOFTDOWN (0x2 << 0) +#define PMECR_PM_POWERSAVE (0x3 << 0) + +/* Standard MII PHY data */ +#define KS_P1MBCR 0xE4 +#define P1MBCR_FORCE_FDX (1 << 8) + +#define KS_P1MBSR 0xE6 +#define P1MBSR_AN_COMPLETE (1 << 5) +#define P1MBSR_AN_CAPABLE (1 << 3) +#define P1MBSR_LINK_UP (1 << 2) + +#define KS_PHY1ILR 0xE8 +#define KS_PHY1IHR 0xEA +#define KS_P1ANAR 0xEC +#define KS_P1ANLPR 0xEE + +#define KS_P1SCLMD 0xF4 +#define P1SCLMD_LEDOFF (1 << 15) +#define P1SCLMD_TXIDS (1 << 14) +#define P1SCLMD_RESTARTAN (1 << 13) +#define P1SCLMD_DISAUTOMDIX (1 << 10) +#define P1SCLMD_FORCEMDIX (1 << 9) +#define P1SCLMD_AUTONEGEN (1 << 7) +#define P1SCLMD_FORCE100 (1 << 6) +#define P1SCLMD_FORCEFDX (1 << 5) +#define P1SCLMD_ADV_FLOW (1 << 4) +#define P1SCLMD_ADV_100BT_FDX (1 << 3) +#define P1SCLMD_ADV_100BT_HDX (1 << 2) +#define P1SCLMD_ADV_10BT_FDX (1 << 1) +#define P1SCLMD_ADV_10BT_HDX (1 << 0) + +#define KS_P1CR 0xF6 +#define P1CR_HP_MDIX (1 << 15) +#define P1CR_REV_POL (1 << 13) +#define P1CR_OP_100M (1 << 10) +#define P1CR_OP_FDX (1 << 9) +#define P1CR_OP_MDI (1 << 7) +#define P1CR_AN_DONE (1 << 6) +#define P1CR_LINK_GOOD (1 << 5) +#define P1CR_PNTR_FLOW (1 << 4) +#define P1CR_PNTR_100BT_FDX (1 << 3) +#define P1CR_PNTR_100BT_HDX (1 << 2) +#define P1CR_PNTR_10BT_FDX (1 << 1) +#define P1CR_PNTR_10BT_HDX (1 << 0) + +/* TX Frame control */ + +#define TXFR_TXIC (1 << 15) +#define TXFR_TXFID_MASK (0x3f << 0) +#define TXFR_TXFID_SHIFT (0) + +#define KS_P1SR 0xF8 +#define P1SR_HP_MDIX (1 << 15) +#define P1SR_REV_POL (1 << 13) +#define P1SR_OP_100M (1 << 10) +#define P1SR_OP_FDX (1 << 9) +#define P1SR_OP_MDI (1 << 7) +#define P1SR_AN_DONE (1 << 6) +#define P1SR_LINK_GOOD (1 << 5) +#define P1SR_PNTR_FLOW (1 << 4) +#define P1SR_PNTR_100BT_FDX (1 << 3) +#define P1SR_PNTR_100BT_HDX (1 << 2) +#define P1SR_PNTR_10BT_FDX (1 << 1) +#define P1SR_PNTR_10BT_HDX (1 << 0) + +#define ENUM_BUS_NONE 0 +#define ENUM_BUS_8BIT 1 +#define ENUM_BUS_16BIT 2 +#define ENUM_BUS_32BIT 3 + +#define MAX_MCAST_LST 32 +#define HW_MCAST_SIZE 8 +#define MAC_ADDR_LEN 6 + +/** + * union ks_tx_hdr - tx header data + * @txb: The header as bytes + * @txw: The header as 16bit, little-endian words + * + * A dual representation of the tx header data to allow + * access to individual bytes, and to allow 16bit accesses + * with 16bit alignment. + */ +union ks_tx_hdr { + u8 txb[4]; + __le16 txw[2]; +}; + +/** + * struct ks_net - KS8851 driver private data + * @net_device : The network device we're bound to + * @hw_addr : start address of data register. + * @hw_addr_cmd : start address of command register. + * @txh : temporaly buffer to save status/length. + * @lock : Lock to ensure that the device is not accessed when busy. + * @pdev : Pointer to platform device. + * @mii : The MII state information for the mii calls. + * @frame_head_info : frame header information for multi-pkt rx. + * @statelock : Lock on this structure for tx list. + * @msg_enable : The message flags controlling driver output (see ethtool). + * @frame_cnt : number of frames received. + * @bus_width : i/o bus width. + * @irq : irq number assigned to this device. + * @rc_rxqcr : Cached copy of KS_RXQCR. + * @rc_txcr : Cached copy of KS_TXCR. + * @rc_ier : Cached copy of KS_IER. + * @sharedbus : Multipex(addr and data bus) mode indicator. + * @cmd_reg_cache : command register cached. + * @cmd_reg_cache_int : command register cached. Used in the irq handler. + * @promiscuous : promiscuous mode indicator. + * @all_mcast : mutlicast indicator. + * @mcast_lst_size : size of multicast list. + * @mcast_lst : multicast list. + * @mcast_bits : multicast enabed. + * @mac_addr : MAC address assigned to this device. + * @fid : frame id. + * @extra_byte : number of extra byte prepended rx pkt. + * @enabled : indicator this device works. + * + * The @lock ensures that the chip is protected when certain operations are + * in progress. When the read or write packet transfer is in progress, most + * of the chip registers are not accessible until the transfer is finished and + * the DMA has been de-asserted. + * + * The @statelock is used to protect information in the structure which may + * need to be accessed via several sources, such as the network driver layer + * or one of the work queues. + * + */ + +/* Receive multiplex framer header info */ +struct type_frame_head { + u16 sts; /* Frame status */ + u16 len; /* Byte count */ +}; + +struct ks_net { + struct net_device *netdev; + void __iomem *hw_addr; + void __iomem *hw_addr_cmd; + union ks_tx_hdr txh ____cacheline_aligned; + struct mutex lock; /* spinlock to be interrupt safe */ + struct platform_device *pdev; + struct mii_if_info mii; + struct type_frame_head *frame_head_info; + spinlock_t statelock; + u32 msg_enable; + u32 frame_cnt; + int bus_width; + int irq; + + u16 rc_rxqcr; + u16 rc_txcr; + u16 rc_ier; + u16 sharedbus; + u16 cmd_reg_cache; + u16 cmd_reg_cache_int; + u16 promiscuous; + u16 all_mcast; + u16 mcast_lst_size; + u8 mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN]; + u8 mcast_bits[HW_MCAST_SIZE]; + u8 mac_addr[6]; + u8 fid; + u8 extra_byte; + u8 enabled; +}; + +static int msg_enable; + +#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg) +#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg) +#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg) +#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg) + +#define BE3 0x8000 /* Byte Enable 3 */ +#define BE2 0x4000 /* Byte Enable 2 */ +#define BE1 0x2000 /* Byte Enable 1 */ +#define BE0 0x1000 /* Byte Enable 0 */ + +/** + * register read/write calls. + * + * All these calls issue transactions to access the chip's registers. They + * all require that the necessary lock is held to prevent accesses when the + * chip is busy transfering packet data (RX/TX FIFO accesses). + */ + +/** + * ks_rdreg8 - read 8 bit register from device + * @ks : The chip information + * @offset: The register address + * + * Read a 8bit register from the chip, returning the result + */ +static u8 ks_rdreg8(struct ks_net *ks, int offset) +{ + u16 data; + u8 shift_bit = offset & 0x03; + u8 shift_data = (offset & 1) << 3; + ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + data = ioread16(ks->hw_addr); + return (u8)(data >> shift_data); +} + +/** + * ks_rdreg16 - read 16 bit register from device + * @ks : The chip information + * @offset: The register address + * + * Read a 16bit register from the chip, returning the result + */ + +static u16 ks_rdreg16(struct ks_net *ks, int offset) +{ + ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02)); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + return ioread16(ks->hw_addr); +} + +/** + * ks_wrreg8 - write 8bit register value to chip + * @ks: The chip information + * @offset: The register address + * @value: The value to write + * + */ +static void ks_wrreg8(struct ks_net *ks, int offset, u8 value) +{ + u8 shift_bit = (offset & 0x03); + u16 value_write = (u16)(value << ((offset & 1) << 3)); + ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + iowrite16(value_write, ks->hw_addr); +} + +/** + * ks_wrreg16 - write 16bit register value to chip + * @ks: The chip information + * @offset: The register address + * @value: The value to write + * + */ + +static void ks_wrreg16(struct ks_net *ks, int offset, u16 value) +{ + ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02)); + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); + iowrite16(value, ks->hw_addr); +} + +/** + * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled. + * @ks: The chip state + * @wptr: buffer address to save data + * @len: length in byte to read + * + */ +static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len) +{ + len >>= 1; + while (len--) + *wptr++ = (u16)ioread16(ks->hw_addr); +} + +/** + * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled. + * @ks: The chip information + * @wptr: buffer address + * @len: length in byte to write + * + */ +static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len) +{ + len >>= 1; + while (len--) + iowrite16(*wptr++, ks->hw_addr); +} + +static void ks_disable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, 0x0000); +} /* ks_disable_int */ + +static void ks_enable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, ks->rc_ier); +} /* ks_enable_int */ + +/** + * ks_tx_fifo_space - return the available hardware buffer size. + * @ks: The chip information + * + */ +static inline u16 ks_tx_fifo_space(struct ks_net *ks) +{ + return ks_rdreg16(ks, KS_TXMIR) & 0x1fff; +} + +/** + * ks_save_cmd_reg - save the command register from the cache. + * @ks: The chip information + * + */ +static inline void ks_save_cmd_reg(struct ks_net *ks) +{ + /*ks8851 MLL has a bug to read back the command register. + * So rely on software to save the content of command register. + */ + ks->cmd_reg_cache_int = ks->cmd_reg_cache; +} + +/** + * ks_restore_cmd_reg - restore the command register from the cache and + * write to hardware register. + * @ks: The chip information + * + */ +static inline void ks_restore_cmd_reg(struct ks_net *ks) +{ + ks->cmd_reg_cache = ks->cmd_reg_cache_int; + iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); +} + +/** + * ks_set_powermode - set power mode of the device + * @ks: The chip information + * @pwrmode: The power mode value to write to KS_PMECR. + * + * Change the power mode of the chip. + */ +static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode) +{ + unsigned pmecr; + + if (netif_msg_hw(ks)) + ks_dbg(ks, "setting power mode %d\n", pwrmode); + + ks_rdreg16(ks, KS_GRR); + pmecr = ks_rdreg16(ks, KS_PMECR); + pmecr &= ~PMECR_PM_MASK; + pmecr |= pwrmode; + + ks_wrreg16(ks, KS_PMECR, pmecr); +} + +/** + * ks_read_config - read chip configuration of bus width. + * @ks: The chip information + * + */ +static void ks_read_config(struct ks_net *ks) +{ + u16 reg_data = 0; + + /* Regardless of bus width, 8 bit read should always work.*/ + reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF; + reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8; + + /* addr/data bus are multiplexed */ + ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED; + + /* There are garbage data when reading data from QMU, + depending on bus-width. + */ + + if (reg_data & CCR_8BIT) { + ks->bus_width = ENUM_BUS_8BIT; + ks->extra_byte = 1; + } else if (reg_data & CCR_16BIT) { + ks->bus_width = ENUM_BUS_16BIT; + ks->extra_byte = 2; + } else { + ks->bus_width = ENUM_BUS_32BIT; + ks->extra_byte = 4; + } +} + +/** + * ks_soft_reset - issue one of the soft reset to the device + * @ks: The device state. + * @op: The bit(s) to set in the GRR + * + * Issue the relevant soft-reset command to the device's GRR register + * specified by @op. + * + * Note, the delays are in there as a caution to ensure that the reset + * has time to take effect and then complete. Since the datasheet does + * not currently specify the exact sequence, we have chosen something + * that seems to work with our device. + */ +static void ks_soft_reset(struct ks_net *ks, unsigned op) +{ + /* Disable interrupt first */ + ks_wrreg16(ks, KS_IER, 0x0000); + ks_wrreg16(ks, KS_GRR, op); + mdelay(10); /* wait a short time to effect reset */ + ks_wrreg16(ks, KS_GRR, 0); + mdelay(1); /* wait for condition to clear */ +} + + +void ks_enable_qmu(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + /* Enables QMU Transmit (TXCR). */ + ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); + + /* + * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame + * Enable + */ + + w = ks_rdreg16(ks, KS_RXQCR); + ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); + + /* Enables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); + ks->enabled = true; +} /* ks_enable_qmu */ + +static void ks_disable_qmu(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + + /* Disables QMU Transmit (TXCR). */ + w &= ~TXCR_TXE; + ks_wrreg16(ks, KS_TXCR, w); + + /* Disables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + w &= ~RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, w); + + ks->enabled = false; + +} /* ks_disable_qmu */ + +/** + * ks_read_qmu - read 1 pkt data from the QMU. + * @ks: The chip information + * @buf: buffer address to save 1 pkt + * @len: Pkt length + * Here is the sequence to read 1 pkt: + * 1. set sudo DMA mode + * 2. read prepend data + * 3. read pkt data + * 4. reset sudo DMA Mode + */ +static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len) +{ + u32 r = ks->extra_byte & 0x1 ; + u32 w = ks->extra_byte - r; + + /* 1. set sudo DMA mode */ + ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI); + ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff); + + /* 2. read prepend data */ + /** + * read 4 + extra bytes and discard them. + * extra bytes for dummy, 2 for status, 2 for len + */ + + /* use likely(r) for 8 bit access for performance */ + if (unlikely(r)) + ioread8(ks->hw_addr); + ks_inblk(ks, buf, w + 2 + 2); + + /* 3. read pkt data */ + ks_inblk(ks, buf, ALIGN(len, 4)); + + /* 4. reset sudo DMA Mode */ + ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr); +} + +/** + * ks_rcv - read multiple pkts data from the QMU. + * @ks: The chip information + * @netdev: The network device being opened. + * + * Read all of header information before reading pkt content. + * It is not allowed only port of pkts in QMU after issuing + * interrupt ack. + */ +static void ks_rcv(struct ks_net *ks, struct net_device *netdev) +{ + u32 i; + struct type_frame_head *frame_hdr = ks->frame_head_info; + struct sk_buff *skb; + + ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8; + + /* read all header information */ + for (i = 0; i < ks->frame_cnt; i++) { + /* Checking Received packet status */ + frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR); + /* Get packet len from hardware */ + frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR); + frame_hdr++; + } + + frame_hdr = ks->frame_head_info; + while (ks->frame_cnt--) { + skb = dev_alloc_skb(frame_hdr->len + 16); + if (likely(skb && (frame_hdr->sts & RXFSHR_RXFV) && + (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) { + skb_reserve(skb, 2); + /* read data block including CRC 4 bytes */ + ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len); + skb_put(skb, frame_hdr->len); + skb->dev = netdev; + skb->protocol = eth_type_trans(skb, netdev); + netif_rx(skb); + } else { + printk(KERN_ERR "%s: err:skb alloc\n", __func__); + ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF)); + if (skb) + dev_kfree_skb_irq(skb); + } + frame_hdr++; + } +} + +/** + * ks_update_link_status - link status update. + * @netdev: The network device being opened. + * @ks: The chip information + * + */ + +static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) +{ + /* check the status of the link */ + u32 link_up_status; + if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) { + netif_carrier_on(netdev); + link_up_status = true; + } else { + netif_carrier_off(netdev); + link_up_status = false; + } + if (netif_msg_link(ks)) + ks_dbg(ks, "%s: %s\n", + __func__, link_up_status ? "UP" : "DOWN"); +} + +/** + * ks_irq - device interrupt handler + * @irq: Interrupt number passed from the IRQ hnalder. + * @pw: The private word passed to register_irq(), our struct ks_net. + * + * This is the handler invoked to find out what happened + * + * Read the interrupt status, work out what needs to be done and then clear + * any of the interrupts that are not needed. + */ + +static irqreturn_t ks_irq(int irq, void *pw) +{ + struct ks_net *ks = pw; + struct net_device *netdev = ks->netdev; + u16 status; + + /*this should be the first in IRQ handler */ + ks_save_cmd_reg(ks); + + status = ks_rdreg16(ks, KS_ISR); + if (unlikely(!status)) { + ks_restore_cmd_reg(ks); + return IRQ_NONE; + } + + ks_wrreg16(ks, KS_ISR, status); + + if (likely(status & IRQ_RXI)) + ks_rcv(ks, netdev); + + if (unlikely(status & IRQ_LCI)) + ks_update_link_status(netdev, ks); + + if (unlikely(status & IRQ_TXI)) + netif_wake_queue(netdev); + + if (unlikely(status & IRQ_LDI)) { + + u16 pmecr = ks_rdreg16(ks, KS_PMECR); + pmecr &= ~PMECR_WKEVT_MASK; + ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK); + } + + /* this should be the last in IRQ handler*/ + ks_restore_cmd_reg(ks); + return IRQ_HANDLED; +} + + +/** + * ks_net_open - open network device + * @netdev: The network device being opened. + * + * Called when the network device is marked active, such as a user executing + * 'ifconfig up' on the device. + */ +static int ks_net_open(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + int err; + +#define KS_INT_FLAGS (IRQF_DISABLED|IRQF_TRIGGER_LOW) + /* lock the card, even if we may not actually do anything + * else at the moment. + */ + + if (netif_msg_ifup(ks)) + ks_dbg(ks, "%s - entry\n", __func__); + + /* reset the HW */ + err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev); + + if (err) { + printk(KERN_ERR "Failed to request IRQ: %d: %d\n", + ks->irq, err); + return err; + } + + /* wake up powermode to normal mode */ + ks_set_powermode(ks, PMECR_PM_NORMAL); + mdelay(1); /* wait for normal mode to take effect */ + + ks_wrreg16(ks, KS_ISR, 0xffff); + ks_enable_int(ks); + ks_enable_qmu(ks); + netif_start_queue(ks->netdev); + + if (netif_msg_ifup(ks)) + ks_dbg(ks, "network device %s up\n", netdev->name); + + return 0; +} + +/** + * ks_net_stop - close network device + * @netdev: The device being closed. + * + * Called to close down a network device which has been active. Cancell any + * work, shutdown the RX and TX process and then place the chip into a low + * power state whilst it is not being used. + */ +static int ks_net_stop(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + + if (netif_msg_ifdown(ks)) + ks_info(ks, "%s: shutting down\n", netdev->name); + + netif_stop_queue(netdev); + + mutex_lock(&ks->lock); + + /* turn off the IRQs and ack any outstanding */ + ks_wrreg16(ks, KS_IER, 0x0000); + ks_wrreg16(ks, KS_ISR, 0xffff); + + /* shutdown RX/TX QMU */ + ks_disable_qmu(ks); + + /* set powermode to soft power down to save power */ + ks_set_powermode(ks, PMECR_PM_SOFTDOWN); + free_irq(ks->irq, netdev); + mutex_unlock(&ks->lock); + return 0; +} + + +/** + * ks_write_qmu - write 1 pkt data to the QMU. + * @ks: The chip information + * @pdata: buffer address to save 1 pkt + * @len: Pkt length in byte + * Here is the sequence to write 1 pkt: + * 1. set sudo DMA mode + * 2. write status/length + * 3. write pkt data + * 4. reset sudo DMA Mode + * 5. reset sudo DMA mode + * 6. Wait until pkt is out + */ +static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) +{ + /* start header at txb[0] to align txw entries */ + ks->txh.txw[0] = 0; + ks->txh.txw[1] = cpu_to_le16(len); + + /* 1. set sudo-DMA mode */ + ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff); + /* 2. write status/lenth info */ + ks_outblk(ks, ks->txh.txw, 4); + /* 3. write pkt data */ + ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4)); + /* 4. reset sudo-DMA mode */ + ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr); + /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */ + ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE); + /* 6. wait until TXQCR_METFE is auto-cleared */ + while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE) + ; +} + +/** + * ks_start_xmit - transmit packet + * @skb : The buffer to transmit + * @netdev : The device used to transmit the packet. + * + * Called by the network layer to transmit the @skb. + * spin_lock_irqsave is required because tx and rx should be mutual exclusive. + * So while tx is in-progress, prevent IRQ interrupt from happenning. + */ +static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + int retv = NETDEV_TX_OK; + struct ks_net *ks = netdev_priv(netdev); + + disable_irq(netdev->irq); + ks_disable_int(ks); + spin_lock(&ks->statelock); + + /* Extra space are required: + * 4 byte for alignment, 4 for status/length, 4 for CRC + */ + + if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) { + ks_write_qmu(ks, skb->data, skb->len); + dev_kfree_skb(skb); + } else + retv = NETDEV_TX_BUSY; + spin_unlock(&ks->statelock); + ks_enable_int(ks); + enable_irq(netdev->irq); + return retv; +} + +/** + * ks_start_rx - ready to serve pkts + * @ks : The chip information + * + */ +static void ks_start_rx(struct ks_net *ks) +{ + u16 cntl; + + /* Enables QMU Receive (RXCR1). */ + cntl = ks_rdreg16(ks, KS_RXCR1); + cntl |= RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, cntl); +} /* ks_start_rx */ + +/** + * ks_stop_rx - stop to serve pkts + * @ks : The chip information + * + */ +static void ks_stop_rx(struct ks_net *ks) +{ + u16 cntl; + + /* Disables QMU Receive (RXCR1). */ + cntl = ks_rdreg16(ks, KS_RXCR1); + cntl &= ~RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, cntl); + +} /* ks_stop_rx */ + +static unsigned long const ethernet_polynomial = 0x04c11db7U; + +static unsigned long ether_gen_crc(int length, u8 *data) +{ + long crc = -1; + while (--length >= 0) { + u8 current_octet = *data++; + int bit; + + for (bit = 0; bit < 8; bit++, current_octet >>= 1) { + crc = (crc << 1) ^ + ((crc < 0) ^ (current_octet & 1) ? + ethernet_polynomial : 0); + } + } + return (unsigned long)crc; +} /* ether_gen_crc */ + +/** +* ks_set_grpaddr - set multicast information +* @ks : The chip information +*/ + +static void ks_set_grpaddr(struct ks_net *ks) +{ + u8 i; + u32 index, position, value; + + memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE); + + for (i = 0; i < ks->mcast_lst_size; i++) { + position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f; + index = position >> 3; + value = 1 << (position & 7); + ks->mcast_bits[index] |= (u8)value; + } + + for (i = 0; i < HW_MCAST_SIZE; i++) { + if (i & 1) { + ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1), + (ks->mcast_bits[i] << 8) | + ks->mcast_bits[i - 1]); + } + } +} /* ks_set_grpaddr */ + +/* +* ks_clear_mcast - clear multicast information +* +* @ks : The chip information +* This routine removes all mcast addresses set in the hardware. +*/ + +static void ks_clear_mcast(struct ks_net *ks) +{ + u16 i, mcast_size; + for (i = 0; i < HW_MCAST_SIZE; i++) + ks->mcast_bits[i] = 0; + + mcast_size = HW_MCAST_SIZE >> 2; + for (i = 0; i < mcast_size; i++) + ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0); +} + +static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode) +{ + u16 cntl; + ks->promiscuous = promiscuous_mode; + ks_stop_rx(ks); /* Stop receiving for reconfiguration */ + cntl = ks_rdreg16(ks, KS_RXCR1); + + cntl &= ~RXCR1_FILTER_MASK; + if (promiscuous_mode) + /* Enable Promiscuous mode */ + cntl |= RXCR1_RXAE | RXCR1_RXINVF; + else + /* Disable Promiscuous mode (default normal mode) */ + cntl |= RXCR1_RXPAFMA; + + ks_wrreg16(ks, KS_RXCR1, cntl); + + if (ks->enabled) + ks_start_rx(ks); + +} /* ks_set_promis */ + +static void ks_set_mcast(struct ks_net *ks, u16 mcast) +{ + u16 cntl; + + ks->all_mcast = mcast; + ks_stop_rx(ks); /* Stop receiving for reconfiguration */ + cntl = ks_rdreg16(ks, KS_RXCR1); + cntl &= ~RXCR1_FILTER_MASK; + if (mcast) + /* Enable "Perfect with Multicast address passed mode" */ + cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA); + else + /** + * Disable "Perfect with Multicast address passed + * mode" (normal mode). + */ + cntl |= RXCR1_RXPAFMA; + + ks_wrreg16(ks, KS_RXCR1, cntl); + + if (ks->enabled) + ks_start_rx(ks); +} /* ks_set_mcast */ + +static void ks_set_rx_mode(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + struct dev_mc_list *ptr; + + /* Turn on/off promiscuous mode. */ + if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC) + ks_set_promis(ks, + (u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC)); + /* Turn on/off all mcast mode. */ + else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI) + ks_set_mcast(ks, + (u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)); + else + ks_set_promis(ks, false); + + if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) { + if (netdev->mc_count <= MAX_MCAST_LST) { + int i = 0; + for (ptr = netdev->mc_list; ptr; ptr = ptr->next) { + if (!(*ptr->dmi_addr & 1)) + continue; + if (i >= MAX_MCAST_LST) + break; + memcpy(ks->mcast_lst[i++], ptr->dmi_addr, + MAC_ADDR_LEN); + } + ks->mcast_lst_size = (u8)i; + ks_set_grpaddr(ks); + } else { + /** + * List too big to support so + * turn on all mcast mode. + */ + ks->mcast_lst_size = MAX_MCAST_LST; + ks_set_mcast(ks, true); + } + } else { + ks->mcast_lst_size = 0; + ks_clear_mcast(ks); + } +} /* ks_set_rx_mode */ + +static void ks_set_mac(struct ks_net *ks, u8 *data) +{ + u16 *pw = (u16 *)data; + u16 w, u; + + ks_stop_rx(ks); /* Stop receiving for reconfiguration */ + + u = *pw++; + w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); + ks_wrreg16(ks, KS_MARH, w); + + u = *pw++; + w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); + ks_wrreg16(ks, KS_MARM, w); + + u = *pw; + w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); + ks_wrreg16(ks, KS_MARL, w); + + memcpy(ks->mac_addr, data, 6); + + if (ks->enabled) + ks_start_rx(ks); +} + +static int ks_set_mac_address(struct net_device *netdev, void *paddr) +{ + struct ks_net *ks = netdev_priv(netdev); + struct sockaddr *addr = paddr; + u8 *da; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + da = (u8 *)netdev->dev_addr; + + ks_set_mac(ks, da); + return 0; +} + +static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) +{ + struct ks_net *ks = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL); +} + +static const struct net_device_ops ks_netdev_ops = { + .ndo_open = ks_net_open, + .ndo_stop = ks_net_stop, + .ndo_do_ioctl = ks_net_ioctl, + .ndo_start_xmit = ks_start_xmit, + .ndo_set_mac_address = ks_set_mac_address, + .ndo_set_rx_mode = ks_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +/* ethtool support */ + +static void ks_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *di) +{ + strlcpy(di->driver, DRV_NAME, sizeof(di->driver)); + strlcpy(di->version, "1.00", sizeof(di->version)); + strlcpy(di->bus_info, dev_name(netdev->dev.parent), + sizeof(di->bus_info)); +} + +static u32 ks_get_msglevel(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + return ks->msg_enable; +} + +static void ks_set_msglevel(struct net_device *netdev, u32 to) +{ + struct ks_net *ks = netdev_priv(netdev); + ks->msg_enable = to; +} + +static int ks_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_ethtool_gset(&ks->mii, cmd); +} + +static int ks_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_ethtool_sset(&ks->mii, cmd); +} + +static u32 ks_get_link(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_link_ok(&ks->mii); +} + +static int ks_nway_reset(struct net_device *netdev) +{ + struct ks_net *ks = netdev_priv(netdev); + return mii_nway_restart(&ks->mii); +} + +static const struct ethtool_ops ks_ethtool_ops = { + .get_drvinfo = ks_get_drvinfo, + .get_msglevel = ks_get_msglevel, + .set_msglevel = ks_set_msglevel, + .get_settings = ks_get_settings, + .set_settings = ks_set_settings, + .get_link = ks_get_link, + .nway_reset = ks_nway_reset, +}; + +/* MII interface controls */ + +/** + * ks_phy_reg - convert MII register into a KS8851 register + * @reg: MII register number. + * + * Return the KS8851 register number for the corresponding MII PHY register + * if possible. Return zero if the MII register has no direct mapping to the + * KS8851 register set. + */ +static int ks_phy_reg(int reg) +{ + switch (reg) { + case MII_BMCR: + return KS_P1MBCR; + case MII_BMSR: + return KS_P1MBSR; + case MII_PHYSID1: + return KS_PHY1ILR; + case MII_PHYSID2: + return KS_PHY1IHR; + case MII_ADVERTISE: + return KS_P1ANAR; + case MII_LPA: + return KS_P1ANLPR; + } + + return 0x0; +} + +/** + * ks_phy_read - MII interface PHY register read. + * @netdev: The network device the PHY is on. + * @phy_addr: Address of PHY (ignored as we only have one) + * @reg: The register to read. + * + * This call reads data from the PHY register specified in @reg. Since the + * device does not support all the MII registers, the non-existant values + * are always returned as zero. + * + * We return zero for unsupported registers as the MII code does not check + * the value returned for any error status, and simply returns it to the + * caller. The mii-tool that the driver was tested with takes any -ve error + * as real PHY capabilities, thus displaying incorrect data to the user. + */ +static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg) +{ + struct ks_net *ks = netdev_priv(netdev); + int ksreg; + int result; + + ksreg = ks_phy_reg(reg); + if (!ksreg) + return 0x0; /* no error return allowed, so use zero */ + + mutex_lock(&ks->lock); + result = ks_rdreg16(ks, ksreg); + mutex_unlock(&ks->lock); + + return result; +} + +static void ks_phy_write(struct net_device *netdev, + int phy, int reg, int value) +{ + struct ks_net *ks = netdev_priv(netdev); + int ksreg; + + ksreg = ks_phy_reg(reg); + if (ksreg) { + mutex_lock(&ks->lock); + ks_wrreg16(ks, ksreg, value); + mutex_unlock(&ks->lock); + } +} + +/** + * ks_read_selftest - read the selftest memory info. + * @ks: The device state + * + * Read and check the TX/RX memory selftest information. + */ +static int ks_read_selftest(struct ks_net *ks) +{ + unsigned both_done = MBIR_TXMBF | MBIR_RXMBF; + int ret = 0; + unsigned rd; + + rd = ks_rdreg16(ks, KS_MBIR); + + if ((rd & both_done) != both_done) { + ks_warn(ks, "Memory selftest not finished\n"); + return 0; + } + + if (rd & MBIR_TXMBFA) { + ks_err(ks, "TX memory selftest fails\n"); + ret |= 1; + } + + if (rd & MBIR_RXMBFA) { + ks_err(ks, "RX memory selftest fails\n"); + ret |= 2; + } + + ks_info(ks, "the selftest passes\n"); + return ret; +} + +static void ks_setup(struct ks_net *ks) +{ + u16 w; + + /** + * Configure QMU Transmit + */ + + /* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */ + ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI); + + /* Setup Receive Frame Data Pointer Auto-Increment */ + ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI); + + /* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */ + ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK); + + /* Setup RxQ Command Control (RXQCR) */ + ks->rc_rxqcr = RXQCR_CMD_CNTL; + ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); + + /** + * set the force mode to half duplex, default is full duplex + * because if the auto-negotiation fails, most switch uses + * half-duplex. + */ + + w = ks_rdreg16(ks, KS_P1MBCR); + w &= ~P1MBCR_FORCE_FDX; + ks_wrreg16(ks, KS_P1MBCR, w); + + w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP; + ks_wrreg16(ks, KS_TXCR, w); + + w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC; + + if (ks->promiscuous) /* bPromiscuous */ + w |= (RXCR1_RXAE | RXCR1_RXINVF); + else if (ks->all_mcast) /* Multicast address passed mode */ + w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA); + else /* Normal mode */ + w |= RXCR1_RXPAFMA; + + ks_wrreg16(ks, KS_RXCR1, w); +} /*ks_setup */ + + +static void ks_setup_int(struct ks_net *ks) +{ + ks->rc_ier = 0x00; + /* Clear the interrupts status of the hardware. */ + ks_wrreg16(ks, KS_ISR, 0xffff); + + /* Enables the interrupts of the hardware. */ + ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI); +} /* ks_setup_int */ + +static int ks_hw_init(struct ks_net *ks) +{ +#define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES) + ks->promiscuous = 0; + ks->all_mcast = 0; + ks->mcast_lst_size = 0; + + ks->frame_head_info = (struct type_frame_head *) \ + kmalloc(MHEADER_SIZE, GFP_KERNEL); + if (!ks->frame_head_info) { + printk(KERN_ERR "Error: Fail to allocate frame memory\n"); + return false; + } + + ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS); + return true; +} + + +static int __devinit ks8851_probe(struct platform_device *pdev) +{ + int err = -ENOMEM; + struct resource *io_d, *io_c; + struct net_device *netdev; + struct ks_net *ks; + u16 id, data; + + io_d = platform_get_resource(pdev, IORESOURCE_MEM, 0); + io_c = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + if (!request_mem_region(io_d->start, resource_size(io_d), DRV_NAME)) + goto err_mem_region; + + if (!request_mem_region(io_c->start, resource_size(io_c), DRV_NAME)) + goto err_mem_region1; + + netdev = alloc_etherdev(sizeof(struct ks_net)); + if (!netdev) + goto err_alloc_etherdev; + + SET_NETDEV_DEV(netdev, &pdev->dev); + + ks = netdev_priv(netdev); + ks->netdev = netdev; + ks->hw_addr = ioremap(io_d->start, resource_size(io_d)); + + if (!ks->hw_addr) + goto err_ioremap; + + ks->hw_addr_cmd = ioremap(io_c->start, resource_size(io_c)); + if (!ks->hw_addr_cmd) + goto err_ioremap1; + + ks->irq = platform_get_irq(pdev, 0); + + if (ks->irq < 0) { + err = ks->irq; + goto err_get_irq; + } + + ks->pdev = pdev; + + mutex_init(&ks->lock); + spin_lock_init(&ks->statelock); + + netdev->netdev_ops = &ks_netdev_ops; + netdev->ethtool_ops = &ks_ethtool_ops; + + /* setup mii state */ + ks->mii.dev = netdev; + ks->mii.phy_id = 1, + ks->mii.phy_id_mask = 1; + ks->mii.reg_num_mask = 0xf; + ks->mii.mdio_read = ks_phy_read; + ks->mii.mdio_write = ks_phy_write; + + ks_info(ks, "message enable is %d\n", msg_enable); + /* set the default message enable */ + ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV | + NETIF_MSG_PROBE | + NETIF_MSG_LINK)); + ks_read_config(ks); + + /* simple check for a valid chip being connected to the bus */ + if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { + ks_err(ks, "failed to read device ID\n"); + err = -ENODEV; + goto err_register; + } + + if (ks_read_selftest(ks)) { + ks_err(ks, "failed to read device ID\n"); + err = -ENODEV; + goto err_register; + } + + err = register_netdev(netdev); + if (err) + goto err_register; + + platform_set_drvdata(pdev, netdev); + + ks_soft_reset(ks, GRR_GSR); + ks_hw_init(ks); + ks_disable_qmu(ks); + ks_setup(ks); + ks_setup_int(ks); + memcpy(netdev->dev_addr, ks->mac_addr, 6); + + data = ks_rdreg16(ks, KS_OBCR); + ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA); + + /** + * If you want to use the default MAC addr, + * comment out the 2 functions below. + */ + + random_ether_addr(netdev->dev_addr); + ks_set_mac(ks, netdev->dev_addr); + + id = ks_rdreg16(ks, KS_CIDER); + + printk(KERN_INFO DRV_NAME + " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n", + (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7); + return 0; + +err_register: +err_get_irq: + iounmap(ks->hw_addr_cmd); +err_ioremap1: + iounmap(ks->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + release_mem_region(io_c->start, resource_size(io_c)); +err_mem_region1: + release_mem_region(io_d->start, resource_size(io_d)); +err_mem_region: + return err; +} + +static int __devexit ks8851_remove(struct platform_device *pdev) +{ + struct net_device *netdev = platform_get_drvdata(pdev); + struct ks_net *ks = netdev_priv(netdev); + struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + kfree(ks->frame_head_info); + unregister_netdev(netdev); + iounmap(ks->hw_addr); + free_netdev(netdev); + release_mem_region(iomem->start, resource_size(iomem)); + platform_set_drvdata(pdev, NULL); + return 0; + +} + +static struct platform_driver ks8851_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ks8851_probe, + .remove = __devexit_p(ks8851_remove), +}; + +static int __init ks8851_init(void) +{ + return platform_driver_register(&ks8851_platform_driver); +} + +static void __exit ks8851_exit(void) +{ + platform_driver_unregister(&ks8851_platform_driver); +} + +module_init(ks8851_init); +module_exit(ks8851_exit); + +MODULE_DESCRIPTION("KS8851 MLL Network driver"); +MODULE_AUTHOR("David Choi <david.choi@micrel.com>"); +MODULE_LICENSE("GPL"); +module_param_named(message, msg_enable, int, 0); +MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)"); + diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 61eabcac734..b3d7d8d77f4 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -223,69 +223,73 @@ static int __devinit macsonic_init(struct net_device *dev) return 0; } -static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) { struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; - int i; + unsigned short val; - /* On NuBus boards we can sometimes look in the ROM resources. - No such luck for comm-slot/onboard. */ - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; - /* Most of the time, the address is bit-reversed. The NetBSD - source has a rather long and detailed historical account of - why this is so. */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) + /* + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. + */ bit_reverse_addr(dev->dev_addr); - else - return 0; - - /* If we still have what seems to be a bogus address, we'll - look in the CAM. The top entry should be ours. */ - /* Danger! This only works if MacOS has already initialized - the card... */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { - unsigned short val; - - printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP, 15); - - val = SONIC_READ(SONIC_CAP2); - dev->dev_addr[5] = val >> 8; - dev->dev_addr[4] = val & 0xff; - val = SONIC_READ(SONIC_CAP1); - dev->dev_addr[3] = val >> 8; - dev->dev_addr[2] = val & 0xff; - val = SONIC_READ(SONIC_CAP0); - dev->dev_addr[1] = val >> 8; - dev->dev_addr[0] = val & 0xff; - - printk(KERN_INFO "HW Address from CAM 15: %pM\n", - dev->dev_addr); - } else return 0; - - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { + if (!INVALID_MAC(dev->dev_addr)) + return; + /* - * Still nonsense ... messed up someplace! + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. */ - printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n"); - return -EIO; - } else return 0; + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + random_ether_addr(dev->dev_addr); } static int __devinit mac_onboard_sonic_probe(struct net_device *dev) @@ -402,8 +406,7 @@ static int __devinit mac_onboard_sonic_probe(struct net_device *dev) SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ - if (mac_onboard_sonic_ethernet_addr(dev) != 0) - return -ENODEV; + mac_onboard_sonic_ethernet_addr(dev); /* Shared init code */ return macsonic_init(dev); diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 3aabfd9dd21..2490aa39804 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -360,6 +360,7 @@ static int macvlan_init(struct net_device *dev) dev->state = (dev->state & ~MACVLAN_STATE_MASK) | (lowerdev->state & MACVLAN_STATE_MASK); dev->features = lowerdev->features & MACVLAN_FEATURES; + dev->gso_max_size = lowerdev->gso_max_size; dev->iflink = lowerdev->ifindex; dev->hard_header_len = lowerdev->hard_header_len; @@ -596,6 +597,7 @@ static int macvlan_device_event(struct notifier_block *unused, case NETDEV_FEAT_CHANGE: list_for_each_entry(vlan, &port->vlans, list) { vlan->dev->features = dev->features & MACVLAN_FEATURES; + vlan->dev->gso_max_size = dev->gso_max_size; netdev_features_change(vlan->dev); } break; diff --git a/drivers/net/meth.c b/drivers/net/meth.c index 92ceb689b4d..2af81735386 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -828,7 +828,7 @@ static int __exit meth_remove(struct platform_device *pdev) static struct platform_driver meth_driver = { .probe = meth_probe, - .remove = __devexit_p(meth_remove), + .remove = __exit_p(meth_remove), .driver = { .name = "meth", .owner = THIS_MODULE, diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 3dd481e77f9..291a505fd4f 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1282,6 +1282,8 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */ { PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */ { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ + { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */ + { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */ { 0, } }; diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6930c87f362..f3624517cb0 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.5.0-1.432" +#define MYRI10GE_VERSION_STR "1.5.1-1.451" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1624,10 +1624,21 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) return 0; } } - if (*ptr == 'R' || *ptr == 'Q') { - /* We've found either an XFP or quad ribbon fiber */ + if (*ptr == '2') + ptr++; + if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') { + /* We've found either an XFP, quad ribbon fiber, or SFP+ */ cmd->port = PORT_FIBRE; + cmd->supported |= SUPPORTED_FIBRE; + cmd->advertising |= ADVERTISED_FIBRE; + } else { + cmd->port = PORT_OTHER; } + if (*ptr == 'R' || *ptr == 'S') + cmd->transceiver = XCVR_EXTERNAL; + else + cmd->transceiver = XCVR_INTERNAL; + return 0; } diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 7384f59df61..e1237b80287 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -1163,6 +1163,8 @@ struct netxen_adapter { u32 int_vec_bit; u32 heartbit; + u8 mac_addr[ETH_ALEN]; + struct netxen_adapter_stats stats; struct netxen_recv_context recv_ctx; diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 7a7177421d7..17bb3818d84 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -419,6 +419,7 @@ enum { #define NETXEN_CRB_ROMUSB \ NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB) #define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q) +#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0) #define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB) #define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64) @@ -544,6 +545,8 @@ enum { #define NETXEN_NIU_TEST_MUX_CTL (NETXEN_CRB_NIU + 0x00094) #define NETXEN_NIU_XG_PAUSE_CTL (NETXEN_CRB_NIU + 0x00098) #define NETXEN_NIU_XG_PAUSE_LEVEL (NETXEN_CRB_NIU + 0x000dc) +#define NETXEN_NIU_FRAME_COUNT_SELECT (NETXEN_CRB_NIU + 0x000ac) +#define NETXEN_NIU_FRAME_COUNT (NETXEN_CRB_NIU + 0x000b0) #define NETXEN_NIU_XG_SEL (NETXEN_CRB_NIU + 0x00128) #define NETXEN_NIU_GB_PAUSE_CTL (NETXEN_CRB_NIU + 0x0030c) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 32314000dfc..52a3798d8d9 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -383,24 +383,51 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode) { - __u32 reg; + u32 mac_cfg; + u32 cnt = 0; + __u32 reg = 0x0200; u32 port = adapter->physical_port; + u16 board_type = adapter->ahw.board_type; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; - reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); - if (mode == NETXEN_NIU_PROMISC_MODE) - reg = (reg | 0x2000UL); - else - reg = (reg & ~0x2000UL); + mac_cfg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port)); + mac_cfg &= ~0x4; + NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg); - if (mode == NETXEN_NIU_ALLMULTI_MODE) - reg = (reg | 0x1000UL); - else - reg = (reg & ~0x1000UL); + if ((board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) || + (board_type == NETXEN_BRDTYPE_P2_SB31_10G_HMEZ)) + reg = (0x20 << port); + + NXWR32(adapter, NETXEN_NIU_FRAME_COUNT_SELECT, reg); + + mdelay(10); + + while (NXRD32(adapter, NETXEN_NIU_FRAME_COUNT) && ++cnt < 20) + mdelay(10); + + if (cnt < 20) { + + reg = NXRD32(adapter, + NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); - NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); + if (mode == NETXEN_NIU_PROMISC_MODE) + reg = (reg | 0x2000UL); + else + reg = (reg & ~0x2000UL); + + if (mode == NETXEN_NIU_ALLMULTI_MODE) + reg = (reg | 0x1000UL); + else + reg = (reg & ~0x1000UL); + + NXWR32(adapter, + NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); + } + + mac_cfg |= 0x4; + NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg); return 0; } @@ -436,7 +463,7 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter) { u32 val = 0; u16 port = adapter->physical_port; - u8 *addr = adapter->netdev->dev_addr; + u8 *addr = adapter->mac_addr; if (adapter->mc_enabled) return 0; @@ -465,7 +492,7 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter) { u32 val = 0; u16 port = adapter->physical_port; - u8 *addr = adapter->netdev->dev_addr; + u8 *addr = adapter->mac_addr; if (!adapter->mc_enabled) return 0; @@ -660,7 +687,7 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) list_splice_tail_init(&adapter->mac_list, &del_list); - nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list); + nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list); nx_p3_nic_add_mac(adapter, bcast_addr, &del_list); if (netdev->flags & IFF_PROMISC) { @@ -1901,22 +1928,16 @@ netxen_setup_hwops(struct netxen_adapter *adapter) int netxen_nic_get_board_info(struct netxen_adapter *adapter) { - int offset, board_type, magic, header_version; + int offset, board_type, magic; struct pci_dev *pdev = adapter->pdev; offset = NX_FW_MAGIC_OFFSET; if (netxen_rom_fast_read(adapter, offset, &magic)) return -EIO; - offset = NX_HDR_VERSION_OFFSET; - if (netxen_rom_fast_read(adapter, offset, &header_version)) - return -EIO; - - if (magic != NETXEN_BDINFO_MAGIC || - header_version != NETXEN_BDINFO_VERSION) { - dev_err(&pdev->dev, - "invalid board config, magic=%08x, version=%08x\n", - magic, header_version); + if (magic != NETXEN_BDINFO_MAGIC) { + dev_err(&pdev->dev, "invalid board config, magic=%08x\n", + magic); return -EIO; } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 91c2bc61c8e..8a0904368e0 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -531,6 +531,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + if (off == (NETXEN_CRB_I2C0 + 0x1c)) + continue; /* do not reset PCI */ if (off == (ROMUSB_GLB + 0xbc)) continue; @@ -542,6 +544,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */ continue; + if ((off & 0x0ff00000) == NETXEN_CRB_DDR_NET) + continue; if (off == (NETXEN_CRB_PEG_NET_1 + 0x18)) buf[i].data = 0x1020; /* skip the function enable register */ @@ -553,12 +557,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; } - if (off == NETXEN_ADDR_ERROR) { - printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n", - netxen_nic_driver_name, buf[i].addr); - continue; - } - init_delay = 1; /* After writing this register, HW needs time for CRB */ /* to quiet down (else crb_window returns 0xffffffff) */ diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index b5aa974827e..3bf78dbfbf0 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -437,6 +437,7 @@ netxen_read_mac_addr(struct netxen_adapter *adapter) netdev->dev_addr[i] = *(p + 5 - i); memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); + memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len); /* set station address */ @@ -459,6 +460,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p) netxen_napi_disable(adapter); } + memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len); memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); adapter->macaddr_set(adapter, addr->sa_data); @@ -595,7 +597,8 @@ netxen_setup_pci_map(struct netxen_adapter *adapter) void __iomem *mem_ptr2 = NULL; void __iomem *db_ptr = NULL; - unsigned long mem_base, mem_len, db_base, db_len = 0, pci_len0 = 0; + resource_size_t mem_base, db_base; + unsigned long mem_len, db_len = 0, pci_len0 = 0; struct pci_dev *pdev = adapter->pdev; int pci_func = adapter->ahw.pci_func; @@ -955,7 +958,7 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev) return err; } if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) - adapter->macaddr_set(adapter, netdev->dev_addr); + adapter->macaddr_set(adapter, adapter->mac_addr); adapter->set_multi(netdev); adapter->set_mtu(adapter, netdev->mtu); @@ -1714,7 +1717,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* 4 fragments per cmd des */ no_of_desc = (frag_count + 3) >> 2; - if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) { + if (unlikely(no_of_desc + 2 > netxen_tx_avail(tx_ring))) { netif_stop_queue(netdev); return NETDEV_TX_BUSY; } @@ -1918,6 +1921,7 @@ static void netxen_tx_timeout_task(struct work_struct *work) request_reset: adapter->need_fw_reset = 1; + clear_bit(__NX_RESETTING, &adapter->state); } struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index f9364d0678f..d6c7ac68f6e 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -3545,7 +3545,7 @@ static int niu_process_rx_pkt(struct napi_struct *napi, struct niu *np, rp->rcr_index = index; skb_reserve(skb, NET_IP_ALIGN); - __pskb_pull_tail(skb, min(len, NIU_RXPULL_MAX)); + __pskb_pull_tail(skb, min(len, VLAN_ETH_HLEN)); rp->rx_packets++; rp->rx_bytes += skb->len; diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index c594e194647..57fd483dbb1 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -111,6 +111,7 @@ #include <linux/compiler.h> #include <linux/prefetch.h> #include <linux/ethtool.h> +#include <linux/sched.h> #include <linux/timer.h> #include <linux/if_vlan.h> #include <linux/rtnetlink.h> diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c index 064a4fe1dd9..28a86224879 100644 --- a/drivers/net/pasemi_mac_ethtool.c +++ b/drivers/net/pasemi_mac_ethtool.c @@ -71,6 +71,9 @@ pasemi_mac_ethtool_get_settings(struct net_device *netdev, struct pasemi_mac *mac = netdev_priv(netdev); struct phy_device *phydev = mac->phydev; + if (!phydev) + return -EOPNOTSUPP; + return phy_ethtool_gset(phydev, cmd); } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index ee8ad3e180d..b58965a2b3a 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -251,6 +251,7 @@ static void el3_tx_timeout(struct net_device *dev); static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static const struct ethtool_ops netdev_ethtool_ops; static void set_rx_mode(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); static void tc574_detach(struct pcmcia_device *p_dev); @@ -266,7 +267,7 @@ static const struct net_device_ops el3_netdev_ops = { .ndo_tx_timeout = el3_tx_timeout, .ndo_get_stats = el3_get_stats, .ndo_do_ioctl = el3_ioctl, - .ndo_set_multicast_list = set_rx_mode, + .ndo_set_multicast_list = set_multicast_list, .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -1161,6 +1162,16 @@ static void set_rx_mode(struct net_device *dev) outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); } +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); +} + static int el3_close(struct net_device *dev) { unsigned int ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 474876c879c..94c9ad2746b 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1754,14 +1754,14 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 0xb4be14e3, 0x43ac239b, 0x0877b627), diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 6d28b18e7e2..c1b3f09f452 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -31,6 +31,7 @@ static const char *const version = #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/ioport.h> diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 250e10f2c35..35897134a5d 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -139,7 +139,7 @@ out: return NULL; } -static void __devinit mdio_gpio_bus_deinit(struct device *dev) +static void mdio_gpio_bus_deinit(struct device *dev) { struct mii_bus *bus = dev_get_drvdata(dev); struct mdio_gpio_info *bitbang = bus->priv; @@ -238,6 +238,7 @@ static struct of_device_id mdio_ofgpio_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, mdio_ofgpio_match); static struct of_platform_driver mdio_ofgpio_driver = { .name = "mdio-gpio", diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9bf2a6be903..965adb6174c 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) } /* Pull completed packets off the queue and receive them. */ - while ((skb = ppp_mp_reconstruct(ppp))) - ppp_receive_nonmp_frame(ppp, skb); + while ((skb = ppp_mp_reconstruct(ppp))) { + if (pskb_may_pull(skb, 2)) + ppp_receive_nonmp_frame(ppp, skb); + else { + ++ppp->dev->stats.rx_length_errors; + kfree_skb(skb); + ppp_receive_error(ppp); + } + } return; diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 7cbf6f9b51d..2559991eea6 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -111,9 +111,6 @@ struct pppoe_net { rwlock_t hash_lock; }; -/* to eliminate a race btw pppoe_flush_dev and pppoe_release */ -static DEFINE_SPINLOCK(flush_lock); - /* * PPPoE could be in the following stages: * 1) Discovery stage (to obtain remote MAC and Session ID) @@ -303,45 +300,48 @@ static void pppoe_flush_dev(struct net_device *dev) write_lock_bh(&pn->hash_lock); for (i = 0; i < PPPOE_HASH_SIZE; i++) { struct pppox_sock *po = pn->hash_table[i]; + struct sock *sk; - while (po != NULL) { - struct sock *sk; - if (po->pppoe_dev != dev) { + while (po) { + while (po && po->pppoe_dev != dev) { po = po->next; - continue; } + + if (!po) + break; + sk = sk_pppox(po); - spin_lock(&flush_lock); - po->pppoe_dev = NULL; - spin_unlock(&flush_lock); - dev_put(dev); /* We always grab the socket lock, followed by the - * hash_lock, in that order. Since we should - * hold the sock lock while doing any unbinding, - * we need to release the lock we're holding. - * Hold a reference to the sock so it doesn't disappear - * as we're jumping between locks. + * hash_lock, in that order. Since we should hold the + * sock lock while doing any unbinding, we need to + * release the lock we're holding. Hold a reference to + * the sock so it doesn't disappear as we're jumping + * between locks. */ sock_hold(sk); - write_unlock_bh(&pn->hash_lock); lock_sock(sk); - if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + if (po->pppoe_dev == dev + && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { pppox_unbind_sock(sk); sk->sk_state = PPPOX_ZOMBIE; sk->sk_state_change(sk); + po->pppoe_dev = NULL; + dev_put(dev); } release_sock(sk); sock_put(sk); - /* Restart scan at the beginning of this hash chain. - * While the lock was dropped the chain contents may - * have changed. + /* Restart the process from the start of the current + * hash chain. We dropped locks so the world may have + * change from underneath us. */ + + BUG_ON(pppoe_pernet(dev_net(dev)) == NULL); write_lock_bh(&pn->hash_lock); po = pn->hash_table[i]; } @@ -388,11 +388,16 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *po = pppox_sk(sk); struct pppox_sock *relay_po; + /* Backlog receive. Semantics of backlog rcv preclude any code from + * executing in lock_sock()/release_sock() bounds; meaning sk->sk_state + * can't change. + */ + if (sk->sk_state & PPPOX_BOUND) { ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { - relay_po = get_item_by_addr(dev_net(po->pppoe_dev), - &po->pppoe_relay); + relay_po = get_item_by_addr(sock_net(sk), + &po->pppoe_relay); if (relay_po == NULL) goto abort_kfree; @@ -447,6 +452,10 @@ static int pppoe_rcv(struct sk_buff *skb, struct net_device *dev, goto drop; pn = pppoe_pernet(dev_net(dev)); + + /* Note that get_item does a sock_hold(), so sk_pppox(po) + * is known to be safe. + */ po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex); if (!po) goto drop; @@ -561,6 +570,7 @@ static int pppoe_release(struct socket *sock) struct sock *sk = sock->sk; struct pppox_sock *po; struct pppoe_net *pn; + struct net *net = NULL; if (!sk) return 0; @@ -571,44 +581,28 @@ static int pppoe_release(struct socket *sock) return -EBADF; } + po = pppox_sk(sk); + + if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } + pppox_unbind_sock(sk); /* Signal the death of the socket. */ sk->sk_state = PPPOX_DEAD; - /* - * pppoe_flush_dev could lead to a race with - * this routine so we use flush_lock to eliminate - * such a case (we only need per-net specific data) - */ - spin_lock(&flush_lock); - po = pppox_sk(sk); - if (!po->pppoe_dev) { - spin_unlock(&flush_lock); - goto out; - } - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - spin_unlock(&flush_lock); + net = sock_net(sk); + pn = pppoe_pernet(net); /* * protect "po" from concurrent updates * on pppoe_flush_dev */ - write_lock_bh(&pn->hash_lock); + delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, + po->pppoe_ifindex); - po = pppox_sk(sk); - if (stage_session(po->pppoe_pa.sid)) - __delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, - po->pppoe_ifindex); - - if (po->pppoe_dev) { - dev_put(po->pppoe_dev); - po->pppoe_dev = NULL; - } - - write_unlock_bh(&pn->hash_lock); - -out: sock_orphan(sk); sock->sk = NULL; @@ -625,8 +619,9 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, struct sock *sk = sock->sk; struct sockaddr_pppox *sp = (struct sockaddr_pppox *)uservaddr; struct pppox_sock *po = pppox_sk(sk); - struct net_device *dev; + struct net_device *dev = NULL; struct pppoe_net *pn; + struct net *net = NULL; int error; lock_sock(sk); @@ -652,12 +647,14 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Delete the old binding */ if (stage_session(po->pppoe_pa.sid)) { pppox_unbind_sock(sk); + pn = pppoe_pernet(sock_net(sk)); + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); if (po->pppoe_dev) { - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - delete_item(pn, po->pppoe_pa.sid, - po->pppoe_pa.remote, po->pppoe_ifindex); dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; } + memset(sk_pppox(po) + 1, 0, sizeof(struct pppox_sock) - sizeof(struct sock)); sk->sk_state = PPPOX_NONE; @@ -666,16 +663,15 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Re-bind in session stage only */ if (stage_session(sp->sa_addr.pppoe.sid)) { error = -ENODEV; - dev = dev_get_by_name(sock_net(sk), sp->sa_addr.pppoe.dev); + net = sock_net(sk); + dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev); if (!dev) - goto end; + goto err_put; po->pppoe_dev = dev; po->pppoe_ifindex = dev->ifindex; - pn = pppoe_pernet(dev_net(dev)); - write_lock_bh(&pn->hash_lock); + pn = pppoe_pernet(net); if (!(dev->flags & IFF_UP)) { - write_unlock_bh(&pn->hash_lock); goto err_put; } @@ -683,6 +679,7 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, &sp->sa_addr.pppoe, sizeof(struct pppoe_addr)); + write_lock_bh(&pn->hash_lock); error = __set_item(pn, po); write_unlock_bh(&pn->hash_lock); if (error < 0) @@ -696,8 +693,11 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.ops = &pppoe_chan_ops; error = ppp_register_net_channel(dev_net(dev), &po->chan); - if (error) + if (error) { + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); goto err_put; + } sk->sk_state = PPPOX_CONNECTED; } @@ -915,6 +915,14 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) struct pppoe_hdr *ph; int data_len = skb->len; + /* The higher-level PPP code (ppp_unregister_channel()) ensures the PPP + * xmit operations conclude prior to an unregistration call. Thus + * sk->sk_state cannot change, so we don't need to do lock_sock(). + * But, we also can't do a lock_sock since that introduces a potential + * deadlock as we'd reverse the lock ordering used when calling + * ppp_unregister_channel(). + */ + if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) goto abort; @@ -944,7 +952,6 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) po->pppoe_pa.remote, NULL, data_len); dev_queue_xmit(skb); - return 1; abort: diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index a9845a2f243..c2383adcd52 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -9,6 +9,7 @@ #include <linux/pci.h> #include <linux/netdevice.h> +#include <linux/rtnetlink.h> /* * General definitions... @@ -94,6 +95,7 @@ enum { /* Misc. stuff */ MAILBOX_COUNT = 16, + MAILBOX_TIMEOUT = 5, PROC_ADDR_RDY = (1 << 31), PROC_ADDR_R = (1 << 30), @@ -135,9 +137,9 @@ enum { RST_FO_TFO = (1 << 0), RST_FO_RR_MASK = 0x00060000, RST_FO_RR_CQ_CAM = 0x00000000, - RST_FO_RR_DROP = 0x00000001, - RST_FO_RR_DQ = 0x00000002, - RST_FO_RR_RCV_FUNC_CQ = 0x00000003, + RST_FO_RR_DROP = 0x00000002, + RST_FO_RR_DQ = 0x00000004, + RST_FO_RR_RCV_FUNC_CQ = 0x00000006, RST_FO_FRB = (1 << 12), RST_FO_MOP = (1 << 13), RST_FO_REG = (1 << 14), @@ -802,6 +804,12 @@ enum { MB_CMD_SET_PORT_CFG = 0x00000122, MB_CMD_GET_PORT_CFG = 0x00000123, MB_CMD_GET_LINK_STS = 0x00000124, + MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */ + MB_SET_MPI_TFK_STOP = (1 << 0), + MB_SET_MPI_TFK_RESUME = (1 << 1), + MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */ + MB_GET_MPI_TFK_STOPPED = (1 << 0), + MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1), /* Mailbox Command Status. */ MB_CMD_STS_GOOD = 0x00004000, /* Success. */ @@ -1167,7 +1175,7 @@ struct ricb { #define RSS_RI6 0x40 #define RSS_RT6 0x80 __le16 mask; - __le32 hash_cq_id[256]; + u8 hash_cq_id[1024]; __le32 ipv6_hash_key[10]; __le32 ipv4_hash_key[4]; } __attribute((packed)); @@ -1381,15 +1389,15 @@ struct intr_context { /* adapter flags definitions. */ enum { - QL_ADAPTER_UP = (1 << 0), /* Adapter has been brought up. */ - QL_LEGACY_ENABLED = (1 << 3), - QL_MSI_ENABLED = (1 << 3), - QL_MSIX_ENABLED = (1 << 4), - QL_DMA64 = (1 << 5), - QL_PROMISCUOUS = (1 << 6), - QL_ALLMULTI = (1 << 7), - QL_PORT_CFG = (1 << 8), - QL_CAM_RT_SET = (1 << 9), + QL_ADAPTER_UP = 0, /* Adapter has been brought up. */ + QL_LEGACY_ENABLED = 1, + QL_MSI_ENABLED = 2, + QL_MSIX_ENABLED = 3, + QL_DMA64 = 4, + QL_PROMISCUOUS = 5, + QL_ALLMULTI = 6, + QL_PORT_CFG = 7, + QL_CAM_RT_SET = 8, }; /* link_status bit definitions */ @@ -1477,7 +1485,6 @@ struct ql_adapter { u32 mailbox_in; u32 mailbox_out; struct mbox_params idc_mbc; - struct mutex mpi_mutex; int tx_ring_size; int rx_ring_size; @@ -1606,6 +1613,8 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data); int ql_mb_about_fw(struct ql_adapter *qdev); void ql_link_on(struct ql_adapter *qdev); void ql_link_off(struct ql_adapter *qdev); +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control); +int ql_wait_fifo_empty(struct ql_adapter *qdev); #if 1 #define QL_ALL_DUMP diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 68f9bd280f8..52073946bce 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -45,7 +45,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) if (!netif_running(qdev->ndev)) return status; - spin_lock(&qdev->hw_lock); /* Skip the default queue, and update the outbound handler * queues if they changed. */ @@ -92,7 +91,6 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) } } exit: - spin_unlock(&qdev->hw_lock); return status; } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 7783c5db81d..a2fc70a0d0c 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -34,7 +34,6 @@ #include <linux/etherdevice.h> #include <linux/ethtool.h> #include <linux/skbuff.h> -#include <linux/rtnetlink.h> #include <linux/if_vlan.h> #include <linux/delay.h> #include <linux/mm.h> @@ -321,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, switch (type) { case MAC_ADDR_TYPE_MULTI_MAC: + { + u32 upper = (addr[0] << 8) | addr[1]; + u32 lower = (addr[2] << 24) | (addr[3] << 16) | + (addr[4] << 8) | (addr[5]); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | + (index << MAC_ADDR_IDX_SHIFT) | + type | MAC_ADDR_E); + ql_write32(qdev, MAC_ADDR_DATA, lower); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | + (index << MAC_ADDR_IDX_SHIFT) | + type | MAC_ADDR_E); + + ql_write32(qdev, MAC_ADDR_DATA, upper); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, 0); + if (status) + goto exit; + break; + } case MAC_ADDR_TYPE_CAM_MAC: { u32 cam_output; @@ -366,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, and possibly the function id. Right now we hardcode the route field to NIC core. */ - if (type == MAC_ADDR_TYPE_CAM_MAC) { - cam_output = (CAM_OUT_ROUTE_NIC | - (qdev-> - func << CAM_OUT_FUNC_SHIFT) | - (0 << CAM_OUT_CQ_ID_SHIFT)); - if (qdev->vlgrp) - cam_output |= CAM_OUT_RV; - /* route to NIC core */ - ql_write32(qdev, MAC_ADDR_DATA, cam_output); - } + cam_output = (CAM_OUT_ROUTE_NIC | + (qdev-> + func << CAM_OUT_FUNC_SHIFT) | + (0 << CAM_OUT_CQ_ID_SHIFT)); + if (qdev->vlgrp) + cam_output |= CAM_OUT_RV; + /* route to NIC core */ + ql_write32(qdev, MAC_ADDR_DATA, cam_output); break; } case MAC_ADDR_TYPE_VLAN: @@ -547,14 +575,14 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask, } case RT_IDX_MCAST: /* Pass up All Multicast frames. */ { - value = RT_IDX_DST_CAM_Q | /* dest */ + value = RT_IDX_DST_DFLT_Q | /* dest */ RT_IDX_TYPE_NICQ | /* type */ (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */ break; } case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */ { - value = RT_IDX_DST_CAM_Q | /* dest */ + value = RT_IDX_DST_DFLT_Q | /* dest */ RT_IDX_TYPE_NICQ | /* type */ (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ break; @@ -1926,12 +1954,10 @@ static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid) status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); if (status) return; - spin_lock(&qdev->hw_lock); if (ql_set_mac_addr_reg (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n"); } - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); } @@ -1945,12 +1971,10 @@ static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid) if (status) return; - spin_lock(&qdev->hw_lock); if (ql_set_mac_addr_reg (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n"); } - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); } @@ -2001,15 +2025,17 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) /* * Check MPI processor activity. */ - if (var & STS_PI) { + if ((var & STS_PI) && + (ql_read32(qdev, INTR_MASK) & INTR_MASK_PI)) { /* * We've got an async event or mailbox completion. * Handle it and clear the source of the interrupt. */ QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n"); ql_disable_completion_interrupt(qdev, intr_context->intr); - queue_delayed_work_on(smp_processor_id(), qdev->workqueue, - &qdev->mpi_work, 0); + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); + queue_delayed_work_on(smp_processor_id(), + qdev->workqueue, &qdev->mpi_work, 0); work_done++; } @@ -3080,6 +3106,12 @@ err_irq: static int ql_start_rss(struct ql_adapter *qdev) { + u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, + 0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f, + 0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b, + 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, + 0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, + 0xbe, 0xac, 0x01, 0xfa}; struct ricb *ricb = &qdev->ricb; int status = 0; int i; @@ -3089,21 +3121,17 @@ static int ql_start_rss(struct ql_adapter *qdev) ricb->base_cq = RSS_L4K; ricb->flags = - (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 | - RSS_RT6); - ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1); + (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6); + ricb->mask = cpu_to_le16((u16)(0x3ff)); /* * Fill out the Indirection Table. */ - for (i = 0; i < 256; i++) - hash_id[i] = i & (qdev->rss_ring_count - 1); + for (i = 0; i < 1024; i++) + hash_id[i] = (i & (qdev->rss_ring_count - 1)); - /* - * Random values for the IPv6 and IPv4 Hash Keys. - */ - get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40); - get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16); + memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40); + memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16); QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n"); @@ -3142,14 +3170,14 @@ static int ql_route_initialize(struct ql_adapter *qdev) { int status = 0; - status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + /* Clear all the entries in the routing table. */ + status = ql_clear_routing_entries(qdev); if (status) return status; - /* Clear all the entries in the routing table. */ - status = ql_clear_routing_entries(qdev); + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) - goto exit; + return status; status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1); if (status) { @@ -3242,6 +3270,13 @@ static int ql_adapter_initialize(struct ql_adapter *qdev) ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP | min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE)); + /* Set RX packet routing to use port/pci function on which the + * packet arrived on in addition to usual frame routing. + * This is helpful on bonding where both interfaces can have + * the same MAC address. + */ + ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ); + /* Start up the rx queues. */ for (i = 0; i < qdev->rx_ring_count; i++) { status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]); @@ -3314,6 +3349,13 @@ static int ql_adapter_reset(struct ql_adapter *qdev) end_jiffies = jiffies + max((unsigned long)1, usecs_to_jiffies(30)); + + /* Stop management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); + + /* Wait for the NIC and MGMNT FIFOs to empty. */ + ql_wait_fifo_empty(qdev); + ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); do { @@ -3329,6 +3371,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev) status = -ETIMEDOUT; } + /* Resume management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME); return status; } @@ -3380,12 +3424,10 @@ static int ql_adapter_down(struct ql_adapter *qdev) ql_free_rx_buffers(qdev); - spin_lock(&qdev->hw_lock); status = ql_adapter_reset(qdev); if (status) QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n", qdev->func); - spin_unlock(&qdev->hw_lock); return status; } @@ -3587,7 +3629,6 @@ static void qlge_set_multicast_list(struct net_device *ndev) status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) return; - spin_lock(&qdev->hw_lock); /* * Set or clear promiscuous mode if a * transition is taking place. @@ -3664,7 +3705,6 @@ static void qlge_set_multicast_list(struct net_device *ndev) } } exit: - spin_unlock(&qdev->hw_lock); ql_sem_unlock(qdev, SEM_RT_IDX_MASK); } @@ -3684,10 +3724,8 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p) status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); if (status) return status; - spin_lock(&qdev->hw_lock); status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr, MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ); - spin_unlock(&qdev->hw_lock); if (status) QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n"); ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); @@ -3705,7 +3743,7 @@ static void ql_asic_reset_work(struct work_struct *work) struct ql_adapter *qdev = container_of(work, struct ql_adapter, asic_reset_work.work); int status; - + rtnl_lock(); status = ql_adapter_down(qdev); if (status) goto error; @@ -3714,11 +3752,17 @@ static void ql_asic_reset_work(struct work_struct *work) if (status) goto error; + /* Restore rx mode. */ + clear_bit(QL_ALLMULTI, &qdev->flags); + clear_bit(QL_PROMISCUOUS, &qdev->flags); + qlge_set_multicast_list(qdev->ndev); + + rtnl_unlock(); return; error: QPRINTK(qdev, IFUP, ALERT, "Driver up/down cycle failed, closing device\n"); - rtnl_lock(); + set_bit(QL_ADAPTER_UP, &qdev->flags); dev_close(qdev->ndev); rtnl_unlock(); @@ -3834,11 +3878,14 @@ static int __devinit ql_init_device(struct pci_dev *pdev, return err; } + qdev->ndev = ndev; + qdev->pdev = pdev; + pci_set_drvdata(pdev, ndev); pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (pos <= 0) { dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, " "aborting.\n"); - goto err_out; + return pos; } else { pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16); val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN; @@ -3851,7 +3898,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(&pdev->dev, "PCI region request failed.\n"); - goto err_out; + return err; } pci_set_master(pdev); @@ -3869,7 +3916,9 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } - pci_set_drvdata(pdev, ndev); + /* Set PCIe reset type for EEH to fundamental. */ + pdev->needs_freset = 1; + pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); @@ -3889,8 +3938,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } - qdev->ndev = ndev; - qdev->pdev = pdev; err = ql_get_board_info(qdev); if (err) { dev_err(&pdev->dev, "Register access failed.\n"); @@ -3930,7 +3977,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work); INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work); INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work); - mutex_init(&qdev->mpi_mutex); init_completion(&qdev->ide_completion); if (!cards_found) { @@ -4027,6 +4073,33 @@ static void __devexit qlge_remove(struct pci_dev *pdev) free_netdev(ndev); } +/* Clean up resources without touching hardware. */ +static void ql_eeh_close(struct net_device *ndev) +{ + int i; + struct ql_adapter *qdev = netdev_priv(ndev); + + if (netif_carrier_ok(ndev)) { + netif_carrier_off(ndev); + netif_stop_queue(ndev); + } + + if (test_bit(QL_ADAPTER_UP, &qdev->flags)) + cancel_delayed_work_sync(&qdev->asic_reset_work); + cancel_delayed_work_sync(&qdev->mpi_reset_work); + cancel_delayed_work_sync(&qdev->mpi_work); + cancel_delayed_work_sync(&qdev->mpi_idc_work); + cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); + + for (i = 0; i < qdev->rss_ring_count; i++) + netif_napi_del(&qdev->rx_ring[i].napi); + + clear_bit(QL_ADAPTER_UP, &qdev->flags); + ql_tx_ring_clean(qdev); + ql_free_rx_buffers(qdev); + ql_release_adapter_resources(qdev); +} + /* * This callback is called by the PCI subsystem whenever * a PCI bus error is detected. @@ -4035,17 +4108,21 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, enum pci_channel_state state) { struct net_device *ndev = pci_get_drvdata(pdev); - struct ql_adapter *qdev = netdev_priv(ndev); - - netif_device_detach(ndev); - if (state == pci_channel_io_perm_failure) + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + netif_device_detach(ndev); + if (netif_running(ndev)) + ql_eeh_close(ndev); + pci_disable_device(pdev); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + dev_err(&pdev->dev, + "%s: pci_channel_io_perm_failure.\n", __func__); return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(ndev)) - ql_adapter_down(qdev); - - pci_disable_device(pdev); + } /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -4062,25 +4139,15 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev) struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + pdev->error_state = pci_channel_io_normal; + + pci_restore_state(pdev); if (pci_enable_device(pdev)) { QPRINTK(qdev, IFUP, ERR, "Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } - pci_set_master(pdev); - - netif_carrier_off(ndev); - ql_adapter_reset(qdev); - - /* Make sure the EEPROM is good */ - memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); - - if (!is_valid_ether_addr(ndev->perm_addr)) { - QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - return PCI_ERS_RESULT_RECOVERED; } @@ -4088,17 +4155,21 @@ static void qlge_io_resume(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + int err = 0; - pci_set_master(pdev); - + if (ql_adapter_reset(qdev)) + QPRINTK(qdev, DRV, ERR, "reset FAILED!\n"); if (netif_running(ndev)) { - if (ql_adapter_up(qdev)) { + err = qlge_open(ndev); + if (err) { QPRINTK(qdev, IFUP, ERR, "Device initialization failed after reset.\n"); return; } + } else { + QPRINTK(qdev, IFUP, ERR, + "Device was not running prior to EEH.\n"); } - netif_device_attach(ndev); } diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 6685bd97da9..aec05f26610 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -470,9 +470,9 @@ end: */ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) { - int status, count; + int status; + unsigned long count; - mutex_lock(&qdev->mpi_mutex); /* Begin polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); @@ -492,14 +492,14 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the command to complete. We loop * here because some AEN might arrive while * we're waiting for the mailbox command to - * complete. If more than 5 arrive then we can + * complete. If more than 5 seconds expire we can * assume something is wrong. */ - count = 5; + count = jiffies + HZ * MAILBOX_TIMEOUT; do { /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker @@ -518,15 +518,15 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) MB_CMD_STS_GOOD) || ((mbcp->mbox_out[0] & 0x0000f000) == MB_CMD_STS_INTRMDT)) - break; - } while (--count); + goto done; + } while (time_before(jiffies, count)); - if (!count) { - QPRINTK(qdev, DRV, ERR, - "Timed out waiting for mailbox complete.\n"); - status = -ETIMEDOUT; - goto end; - } + QPRINTK(qdev, DRV, ERR, + "Timed out waiting for mailbox complete.\n"); + status = -ETIMEDOUT; + goto end; + +done: /* Now we can clear the interrupt condition * and look at our status. @@ -541,7 +541,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) status = -EIO; } end: - mutex_unlock(&qdev->mpi_mutex); /* End polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); return status; @@ -770,13 +769,104 @@ static int ql_idc_wait(struct ql_adapter *qdev) return status; } +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 1; + mbcp->out_count = 2; + + mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL; + mbcp->mbox_in[1] = control; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + /* This indicates that the firmware is + * already in the state we are trying to + * change it to. + */ + QPRINTK(qdev, DRV, ERR, + "Command parameters make no change.\n"); + } + return status; +} + +/* Returns a negative error code or the mailbox command status. */ +static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + *control = 0; + + mbcp->in_count = 1; + mbcp->out_count = 1; + + mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) { + *control = mbcp->mbox_in[1]; + return status; + } + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + QPRINTK(qdev, DRV, ERR, + "Failed to get MPI traffic control.\n"); + status = -EIO; + } + return status; +} + +int ql_wait_fifo_empty(struct ql_adapter *qdev) +{ + int count = 5; + u32 mgmnt_fifo_empty; + u32 nic_fifo_empty; + + do { + nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE; + ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty); + mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY; + if (nic_fifo_empty && mgmnt_fifo_empty) + return 0; + msleep(100); + } while (count-- > 0); + return -ETIMEDOUT; +} + /* API called in work thread context to set new TX/RX * maximum frame size values to match MTU. */ static int ql_set_port_cfg(struct ql_adapter *qdev) { int status; + rtnl_lock(); status = ql_mb_set_port_cfg(qdev); + rtnl_unlock(); if (status) return status; status = ql_idc_wait(qdev); @@ -797,7 +887,9 @@ void ql_mpi_port_cfg_work(struct work_struct *work) container_of(work, struct ql_adapter, mpi_port_cfg_work.work); int status; + rtnl_lock(); status = ql_mb_get_port_cfg(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: Failed to get port config data.\n"); @@ -855,7 +947,9 @@ void ql_mpi_idc_work(struct work_struct *work) * needs to be set. * */ set_bit(QL_CAM_RT_SET, &qdev->flags); + rtnl_lock(); status = ql_mb_idc_ack(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: No pending IDC!\n"); @@ -871,7 +965,9 @@ void ql_mpi_work(struct work_struct *work) struct mbox_params *mbcp = &mbc; int err = 0; - mutex_lock(&qdev->mpi_mutex); + rtnl_lock(); + /* Begin polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); while (ql_read32(qdev, STS) & STS_PI) { memset(mbcp, 0, sizeof(struct mbox_params)); @@ -884,7 +980,9 @@ void ql_mpi_work(struct work_struct *work) break; } - mutex_unlock(&qdev->mpi_mutex); + /* End polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); + rtnl_unlock(); ql_enable_completion_interrupt(qdev, 0); } diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 7dfcb58b0eb..8b14c6eda7c 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, int bar = 0; u16 *adrp; - printk(KERN_INFO "%s\n", version); + printk("%s\n", version); err = pci_enable_device(pdev); if (err) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 50c6a3cfe43..0fe2fc90f20 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -115,7 +115,9 @@ enum mac_version { RTL_GIGA_MAC_VER_22 = 0x16, // 8168C RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP - RTL_GIGA_MAC_VER_25 = 0x19 // 8168D + RTL_GIGA_MAC_VER_25 = 0x19, // 8168D + RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D + RTL_GIGA_MAC_VER_27 = 0x1b // 8168DP }; #define _R(NAME,MAC,MASK) \ @@ -150,7 +152,9 @@ static const struct { _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E - _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880) // PCI-E + _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E + _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E + _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_27, 0xff7e1880) // PCI-E }; #undef _R @@ -253,6 +257,13 @@ enum rtl8168_8101_registers { DBG_REG = 0xd1, #define FIX_NAK_1 (1 << 4) #define FIX_NAK_2 (1 << 3) + EFUSEAR = 0xdc, +#define EFUSEAR_FLAG 0x80000000 +#define EFUSEAR_WRITE_CMD 0x80000000 +#define EFUSEAR_READ_CMD 0x00000000 +#define EFUSEAR_REG_MASK 0x03ff +#define EFUSEAR_REG_SHIFT 8 +#define EFUSEAR_DATA_MASK 0xff }; enum rtl_register_content { @@ -568,6 +579,14 @@ static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value) mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value); } +static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m) +{ + int val; + + val = mdio_read(ioaddr, reg_addr); + mdio_write(ioaddr, reg_addr, (val | p) & ~m); +} + static void rtl_mdio_write(struct net_device *dev, int phy_id, int location, int val) { @@ -651,6 +670,24 @@ static u32 rtl_csi_read(void __iomem *ioaddr, int addr) return value; } +static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr) +{ + u8 value = 0xff; + unsigned int i; + + RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT); + + for (i = 0; i < 300; i++) { + if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) { + value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK; + break; + } + udelay(100); + } + + return value; +} + static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) { RTL_W16(IntrMask, 0x0000); @@ -992,7 +1029,10 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); tp->vlgrp = grp; - if (tp->vlgrp) + /* + * Do not disable RxVlan on 8110SCd. + */ + if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05)) tp->cp_cmd |= RxVlan; else tp->cp_cmd &= ~RxVlan; @@ -1243,7 +1283,10 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, int mac_version; } mac_info[] = { /* 8168D family. */ - { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_25 }, + { 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 }, + { 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 }, + { 0x7c800000, 0x28800000, RTL_GIGA_MAC_VER_27 }, + { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 }, /* 8168C family. */ { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 }, @@ -1648,74 +1691,903 @@ static void rtl8168c_4_hw_phy_config(void __iomem *ioaddr) rtl8168c_3_hw_phy_config(ioaddr); } -static void rtl8168d_hw_phy_config(void __iomem *ioaddr) +static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr) { - struct phy_reg phy_reg_init_0[] = { + static struct phy_reg phy_reg_init_0[] = { { 0x1f, 0x0001 }, - { 0x09, 0x2770 }, - { 0x08, 0x04d0 }, - { 0x0b, 0xad15 }, - { 0x0c, 0x5bf0 }, - { 0x1c, 0xf101 }, + { 0x06, 0x4064 }, + { 0x07, 0x2863 }, + { 0x08, 0x059c }, + { 0x09, 0x26b4 }, + { 0x0a, 0x6a19 }, + { 0x0b, 0xdcc8 }, + { 0x10, 0xf06d }, + { 0x14, 0x7f68 }, + { 0x18, 0x7fd9 }, + { 0x1c, 0xf0ff }, + { 0x1d, 0x3d9c }, { 0x1f, 0x0003 }, - { 0x14, 0x94d7 }, - { 0x12, 0xf4d6 }, - { 0x09, 0xca0f }, - { 0x1f, 0x0002 }, - { 0x0b, 0x0b10 }, - { 0x0c, 0xd1f7 }, - { 0x1f, 0x0002 }, - { 0x06, 0x5461 }, + { 0x12, 0xf49f }, + { 0x13, 0x070b }, + { 0x1a, 0x05ad }, + { 0x14, 0x94c0 } + }; + static struct phy_reg phy_reg_init_1[] = { { 0x1f, 0x0002 }, - { 0x05, 0x6662 }, + { 0x06, 0x5561 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8332 }, + { 0x06, 0x5561 } + }; + static struct phy_reg phy_reg_init_2[] = { + { 0x1f, 0x0005 }, + { 0x05, 0xffc2 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8000 }, + { 0x06, 0xf8f9 }, + { 0x06, 0xfaef }, + { 0x06, 0x59ee }, + { 0x06, 0xf8ea }, + { 0x06, 0x00ee }, + { 0x06, 0xf8eb }, + { 0x06, 0x00e0 }, + { 0x06, 0xf87c }, + { 0x06, 0xe1f8 }, + { 0x06, 0x7d59 }, + { 0x06, 0x0fef }, + { 0x06, 0x0139 }, + { 0x06, 0x029e }, + { 0x06, 0x06ef }, + { 0x06, 0x1039 }, + { 0x06, 0x089f }, + { 0x06, 0x2aee }, + { 0x06, 0xf8ea }, + { 0x06, 0x00ee }, + { 0x06, 0xf8eb }, + { 0x06, 0x01e0 }, + { 0x06, 0xf87c }, + { 0x06, 0xe1f8 }, + { 0x06, 0x7d58 }, + { 0x06, 0x409e }, + { 0x06, 0x0f39 }, + { 0x06, 0x46aa }, + { 0x06, 0x0bbf }, + { 0x06, 0x8290 }, + { 0x06, 0xd682 }, + { 0x06, 0x9802 }, + { 0x06, 0x014f }, + { 0x06, 0xae09 }, + { 0x06, 0xbf82 }, + { 0x06, 0x98d6 }, + { 0x06, 0x82a0 }, + { 0x06, 0x0201 }, + { 0x06, 0x4fef }, + { 0x06, 0x95fe }, + { 0x06, 0xfdfc }, + { 0x06, 0x05f8 }, + { 0x06, 0xf9fa }, + { 0x06, 0xeef8 }, + { 0x06, 0xea00 }, + { 0x06, 0xeef8 }, + { 0x06, 0xeb00 }, + { 0x06, 0xe2f8 }, + { 0x06, 0x7ce3 }, + { 0x06, 0xf87d }, + { 0x06, 0xa511 }, + { 0x06, 0x1112 }, + { 0x06, 0xd240 }, + { 0x06, 0xd644 }, + { 0x06, 0x4402 }, + { 0x06, 0x8217 }, + { 0x06, 0xd2a0 }, + { 0x06, 0xd6aa }, + { 0x06, 0xaa02 }, + { 0x06, 0x8217 }, + { 0x06, 0xae0f }, + { 0x06, 0xa544 }, + { 0x06, 0x4402 }, + { 0x06, 0xae4d }, + { 0x06, 0xa5aa }, + { 0x06, 0xaa02 }, + { 0x06, 0xae47 }, + { 0x06, 0xaf82 }, + { 0x06, 0x13ee }, + { 0x06, 0x834e }, + { 0x06, 0x00ee }, + { 0x06, 0x834d }, + { 0x06, 0x0fee }, + { 0x06, 0x834c }, + { 0x06, 0x0fee }, + { 0x06, 0x834f }, + { 0x06, 0x00ee }, + { 0x06, 0x8351 }, + { 0x06, 0x00ee }, + { 0x06, 0x834a }, + { 0x06, 0xffee }, + { 0x06, 0x834b }, + { 0x06, 0xffe0 }, + { 0x06, 0x8330 }, + { 0x06, 0xe183 }, + { 0x06, 0x3158 }, + { 0x06, 0xfee4 }, + { 0x06, 0xf88a }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8be0 }, + { 0x06, 0x8332 }, + { 0x06, 0xe183 }, + { 0x06, 0x3359 }, + { 0x06, 0x0fe2 }, + { 0x06, 0x834d }, + { 0x06, 0x0c24 }, + { 0x06, 0x5af0 }, + { 0x06, 0x1e12 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ce5 }, + { 0x06, 0xf88d }, + { 0x06, 0xaf82 }, + { 0x06, 0x13e0 }, + { 0x06, 0x834f }, + { 0x06, 0x10e4 }, + { 0x06, 0x834f }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x009f }, + { 0x06, 0x0ae0 }, + { 0x06, 0x834f }, + { 0x06, 0xa010 }, + { 0x06, 0xa5ee }, + { 0x06, 0x834e }, + { 0x06, 0x01e0 }, + { 0x06, 0x834e }, + { 0x06, 0x7805 }, + { 0x06, 0x9e9a }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x049e }, + { 0x06, 0x10e0 }, + { 0x06, 0x834e }, + { 0x06, 0x7803 }, + { 0x06, 0x9e0f }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x019e }, + { 0x06, 0x05ae }, + { 0x06, 0x0caf }, + { 0x06, 0x81f8 }, + { 0x06, 0xaf81 }, + { 0x06, 0xa3af }, + { 0x06, 0x81dc }, + { 0x06, 0xaf82 }, + { 0x06, 0x13ee }, + { 0x06, 0x8348 }, + { 0x06, 0x00ee }, + { 0x06, 0x8349 }, + { 0x06, 0x00e0 }, + { 0x06, 0x8351 }, + { 0x06, 0x10e4 }, + { 0x06, 0x8351 }, + { 0x06, 0x5801 }, + { 0x06, 0x9fea }, + { 0x06, 0xd000 }, + { 0x06, 0xd180 }, + { 0x06, 0x1f66 }, + { 0x06, 0xe2f8 }, + { 0x06, 0xeae3 }, + { 0x06, 0xf8eb }, + { 0x06, 0x5af8 }, + { 0x06, 0x1e20 }, + { 0x06, 0xe6f8 }, + { 0x06, 0xeae5 }, + { 0x06, 0xf8eb }, + { 0x06, 0xd302 }, + { 0x06, 0xb3fe }, + { 0x06, 0xe2f8 }, + { 0x06, 0x7cef }, + { 0x06, 0x325b }, + { 0x06, 0x80e3 }, + { 0x06, 0xf87d }, + { 0x06, 0x9e03 }, + { 0x06, 0x7dff }, + { 0x06, 0xff0d }, + { 0x06, 0x581c }, + { 0x06, 0x551a }, + { 0x06, 0x6511 }, + { 0x06, 0xa190 }, + { 0x06, 0xd3e2 }, + { 0x06, 0x8348 }, + { 0x06, 0xe383 }, + { 0x06, 0x491b }, + { 0x06, 0x56ab }, + { 0x06, 0x08ef }, + { 0x06, 0x56e6 }, + { 0x06, 0x8348 }, + { 0x06, 0xe783 }, + { 0x06, 0x4910 }, + { 0x06, 0xd180 }, + { 0x06, 0x1f66 }, + { 0x06, 0xa004 }, + { 0x06, 0xb9e2 }, + { 0x06, 0x8348 }, + { 0x06, 0xe383 }, + { 0x06, 0x49ef }, + { 0x06, 0x65e2 }, + { 0x06, 0x834a }, + { 0x06, 0xe383 }, + { 0x06, 0x4b1b }, + { 0x06, 0x56aa }, + { 0x06, 0x0eef }, + { 0x06, 0x56e6 }, + { 0x06, 0x834a }, + { 0x06, 0xe783 }, + { 0x06, 0x4be2 }, + { 0x06, 0x834d }, + { 0x06, 0xe683 }, + { 0x06, 0x4ce0 }, + { 0x06, 0x834d }, + { 0x06, 0xa000 }, + { 0x06, 0x0caf }, + { 0x06, 0x81dc }, + { 0x06, 0xe083 }, + { 0x06, 0x4d10 }, + { 0x06, 0xe483 }, + { 0x06, 0x4dae }, + { 0x06, 0x0480 }, + { 0x06, 0xe483 }, + { 0x06, 0x4de0 }, + { 0x06, 0x834e }, + { 0x06, 0x7803 }, + { 0x06, 0x9e0b }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x049e }, + { 0x06, 0x04ee }, + { 0x06, 0x834e }, + { 0x06, 0x02e0 }, + { 0x06, 0x8332 }, + { 0x06, 0xe183 }, + { 0x06, 0x3359 }, + { 0x06, 0x0fe2 }, + { 0x06, 0x834d }, + { 0x06, 0x0c24 }, + { 0x06, 0x5af0 }, + { 0x06, 0x1e12 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ce5 }, + { 0x06, 0xf88d }, + { 0x06, 0xe083 }, + { 0x06, 0x30e1 }, + { 0x06, 0x8331 }, + { 0x06, 0x6801 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ae5 }, + { 0x06, 0xf88b }, + { 0x06, 0xae37 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e03 }, + { 0x06, 0xe083 }, + { 0x06, 0x4ce1 }, + { 0x06, 0x834d }, + { 0x06, 0x1b01 }, + { 0x06, 0x9e04 }, + { 0x06, 0xaaa1 }, + { 0x06, 0xaea8 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e04 }, + { 0x06, 0xee83 }, + { 0x06, 0x4f00 }, + { 0x06, 0xaeab }, + { 0x06, 0xe083 }, + { 0x06, 0x4f78 }, + { 0x06, 0x039f }, + { 0x06, 0x14ee }, + { 0x06, 0x834e }, + { 0x06, 0x05d2 }, + { 0x06, 0x40d6 }, + { 0x06, 0x5554 }, + { 0x06, 0x0282 }, + { 0x06, 0x17d2 }, + { 0x06, 0xa0d6 }, + { 0x06, 0xba00 }, + { 0x06, 0x0282 }, + { 0x06, 0x17fe }, + { 0x06, 0xfdfc }, + { 0x06, 0x05f8 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x60e1 }, + { 0x06, 0xf861 }, + { 0x06, 0x6802 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x60e5 }, + { 0x06, 0xf861 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x48e1 }, + { 0x06, 0xf849 }, + { 0x06, 0x580f }, + { 0x06, 0x1e02 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x48e5 }, + { 0x06, 0xf849 }, + { 0x06, 0xd000 }, + { 0x06, 0x0282 }, + { 0x06, 0x5bbf }, + { 0x06, 0x8350 }, + { 0x06, 0xef46 }, + { 0x06, 0xdc19 }, + { 0x06, 0xddd0 }, + { 0x06, 0x0102 }, + { 0x06, 0x825b }, + { 0x06, 0x0282 }, + { 0x06, 0x77e0 }, + { 0x06, 0xf860 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x6158 }, + { 0x06, 0xfde4 }, + { 0x06, 0xf860 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x61fc }, + { 0x06, 0x04f9 }, + { 0x06, 0xfafb }, + { 0x06, 0xc6bf }, + { 0x06, 0xf840 }, + { 0x06, 0xbe83 }, + { 0x06, 0x50a0 }, + { 0x06, 0x0101 }, + { 0x06, 0x071b }, + { 0x06, 0x89cf }, + { 0x06, 0xd208 }, + { 0x06, 0xebdb }, + { 0x06, 0x19b2 }, + { 0x06, 0xfbff }, + { 0x06, 0xfefd }, + { 0x06, 0x04f8 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x48e1 }, + { 0x06, 0xf849 }, + { 0x06, 0x6808 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x48e5 }, + { 0x06, 0xf849 }, + { 0x06, 0x58f7 }, + { 0x06, 0xe4f8 }, + { 0x06, 0x48e5 }, + { 0x06, 0xf849 }, + { 0x06, 0xfc04 }, + { 0x06, 0x4d20 }, + { 0x06, 0x0002 }, + { 0x06, 0x4e22 }, + { 0x06, 0x0002 }, + { 0x06, 0x4ddf }, + { 0x06, 0xff01 }, + { 0x06, 0x4edd }, + { 0x06, 0xff01 }, + { 0x05, 0x83d4 }, + { 0x06, 0x8000 }, + { 0x05, 0x83d8 }, + { 0x06, 0x8051 }, + { 0x02, 0x6010 }, + { 0x03, 0xdc00 }, + { 0x05, 0xfff6 }, + { 0x06, 0x00fc }, { 0x1f, 0x0000 }, - { 0x14, 0x0060 }, + { 0x1f, 0x0000 }, - { 0x0d, 0xf8a0 }, + { 0x0d, 0xf880 }, + { 0x1f, 0x0000 } + }; + + rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0)); + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef); + mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00); + + rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1)); + + if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x669a }, + { 0x1f, 0x0005 }, + { 0x05, 0x8330 }, + { 0x06, 0x669a }, + { 0x1f, 0x0002 } + }; + int val; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); + + val = mdio_read(ioaddr, 0x0d); + + if ((val & 0x00ff) != 0x006c) { + u32 set[] = { + 0x0065, 0x0066, 0x0067, 0x0068, + 0x0069, 0x006a, 0x006b, 0x006c + }; + int i; + + mdio_write(ioaddr, 0x1f, 0x0002); + + val &= 0xff00; + for (i = 0; i < ARRAY_SIZE(set); i++) + mdio_write(ioaddr, 0x0d, val | set[i]); + } + } else { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x6662 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8330 }, + { 0x06, 0x6662 } + }; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); + } + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_patch(ioaddr, 0x0d, 0x0300); + mdio_patch(ioaddr, 0x0f, 0x0010); + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600); + mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000); + + rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2)); +} + +static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr) +{ + static struct phy_reg phy_reg_init_0[] = { + { 0x1f, 0x0001 }, + { 0x06, 0x4064 }, + { 0x07, 0x2863 }, + { 0x08, 0x059c }, + { 0x09, 0x26b4 }, + { 0x0a, 0x6a19 }, + { 0x0b, 0xdcc8 }, + { 0x10, 0xf06d }, + { 0x14, 0x7f68 }, + { 0x18, 0x7fd9 }, + { 0x1c, 0xf0ff }, + { 0x1d, 0x3d9c }, + { 0x1f, 0x0003 }, + { 0x12, 0xf49f }, + { 0x13, 0x070b }, + { 0x1a, 0x05ad }, + { 0x14, 0x94c0 }, + + { 0x1f, 0x0002 }, + { 0x06, 0x5561 }, { 0x1f, 0x0005 }, - { 0x05, 0xffc2 } + { 0x05, 0x8332 }, + { 0x06, 0x5561 } + }; + static struct phy_reg phy_reg_init_1[] = { + { 0x1f, 0x0005 }, + { 0x05, 0xffc2 }, + { 0x1f, 0x0005 }, + { 0x05, 0x8000 }, + { 0x06, 0xf8f9 }, + { 0x06, 0xfaee }, + { 0x06, 0xf8ea }, + { 0x06, 0x00ee }, + { 0x06, 0xf8eb }, + { 0x06, 0x00e2 }, + { 0x06, 0xf87c }, + { 0x06, 0xe3f8 }, + { 0x06, 0x7da5 }, + { 0x06, 0x1111 }, + { 0x06, 0x12d2 }, + { 0x06, 0x40d6 }, + { 0x06, 0x4444 }, + { 0x06, 0x0281 }, + { 0x06, 0xc6d2 }, + { 0x06, 0xa0d6 }, + { 0x06, 0xaaaa }, + { 0x06, 0x0281 }, + { 0x06, 0xc6ae }, + { 0x06, 0x0fa5 }, + { 0x06, 0x4444 }, + { 0x06, 0x02ae }, + { 0x06, 0x4da5 }, + { 0x06, 0xaaaa }, + { 0x06, 0x02ae }, + { 0x06, 0x47af }, + { 0x06, 0x81c2 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e00 }, + { 0x06, 0xee83 }, + { 0x06, 0x4d0f }, + { 0x06, 0xee83 }, + { 0x06, 0x4c0f }, + { 0x06, 0xee83 }, + { 0x06, 0x4f00 }, + { 0x06, 0xee83 }, + { 0x06, 0x5100 }, + { 0x06, 0xee83 }, + { 0x06, 0x4aff }, + { 0x06, 0xee83 }, + { 0x06, 0x4bff }, + { 0x06, 0xe083 }, + { 0x06, 0x30e1 }, + { 0x06, 0x8331 }, + { 0x06, 0x58fe }, + { 0x06, 0xe4f8 }, + { 0x06, 0x8ae5 }, + { 0x06, 0xf88b }, + { 0x06, 0xe083 }, + { 0x06, 0x32e1 }, + { 0x06, 0x8333 }, + { 0x06, 0x590f }, + { 0x06, 0xe283 }, + { 0x06, 0x4d0c }, + { 0x06, 0x245a }, + { 0x06, 0xf01e }, + { 0x06, 0x12e4 }, + { 0x06, 0xf88c }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8daf }, + { 0x06, 0x81c2 }, + { 0x06, 0xe083 }, + { 0x06, 0x4f10 }, + { 0x06, 0xe483 }, + { 0x06, 0x4fe0 }, + { 0x06, 0x834e }, + { 0x06, 0x7800 }, + { 0x06, 0x9f0a }, + { 0x06, 0xe083 }, + { 0x06, 0x4fa0 }, + { 0x06, 0x10a5 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e01 }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x059e }, + { 0x06, 0x9ae0 }, + { 0x06, 0x834e }, + { 0x06, 0x7804 }, + { 0x06, 0x9e10 }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x039e }, + { 0x06, 0x0fe0 }, + { 0x06, 0x834e }, + { 0x06, 0x7801 }, + { 0x06, 0x9e05 }, + { 0x06, 0xae0c }, + { 0x06, 0xaf81 }, + { 0x06, 0xa7af }, + { 0x06, 0x8152 }, + { 0x06, 0xaf81 }, + { 0x06, 0x8baf }, + { 0x06, 0x81c2 }, + { 0x06, 0xee83 }, + { 0x06, 0x4800 }, + { 0x06, 0xee83 }, + { 0x06, 0x4900 }, + { 0x06, 0xe083 }, + { 0x06, 0x5110 }, + { 0x06, 0xe483 }, + { 0x06, 0x5158 }, + { 0x06, 0x019f }, + { 0x06, 0xead0 }, + { 0x06, 0x00d1 }, + { 0x06, 0x801f }, + { 0x06, 0x66e2 }, + { 0x06, 0xf8ea }, + { 0x06, 0xe3f8 }, + { 0x06, 0xeb5a }, + { 0x06, 0xf81e }, + { 0x06, 0x20e6 }, + { 0x06, 0xf8ea }, + { 0x06, 0xe5f8 }, + { 0x06, 0xebd3 }, + { 0x06, 0x02b3 }, + { 0x06, 0xfee2 }, + { 0x06, 0xf87c }, + { 0x06, 0xef32 }, + { 0x06, 0x5b80 }, + { 0x06, 0xe3f8 }, + { 0x06, 0x7d9e }, + { 0x06, 0x037d }, + { 0x06, 0xffff }, + { 0x06, 0x0d58 }, + { 0x06, 0x1c55 }, + { 0x06, 0x1a65 }, + { 0x06, 0x11a1 }, + { 0x06, 0x90d3 }, + { 0x06, 0xe283 }, + { 0x06, 0x48e3 }, + { 0x06, 0x8349 }, + { 0x06, 0x1b56 }, + { 0x06, 0xab08 }, + { 0x06, 0xef56 }, + { 0x06, 0xe683 }, + { 0x06, 0x48e7 }, + { 0x06, 0x8349 }, + { 0x06, 0x10d1 }, + { 0x06, 0x801f }, + { 0x06, 0x66a0 }, + { 0x06, 0x04b9 }, + { 0x06, 0xe283 }, + { 0x06, 0x48e3 }, + { 0x06, 0x8349 }, + { 0x06, 0xef65 }, + { 0x06, 0xe283 }, + { 0x06, 0x4ae3 }, + { 0x06, 0x834b }, + { 0x06, 0x1b56 }, + { 0x06, 0xaa0e }, + { 0x06, 0xef56 }, + { 0x06, 0xe683 }, + { 0x06, 0x4ae7 }, + { 0x06, 0x834b }, + { 0x06, 0xe283 }, + { 0x06, 0x4de6 }, + { 0x06, 0x834c }, + { 0x06, 0xe083 }, + { 0x06, 0x4da0 }, + { 0x06, 0x000c }, + { 0x06, 0xaf81 }, + { 0x06, 0x8be0 }, + { 0x06, 0x834d }, + { 0x06, 0x10e4 }, + { 0x06, 0x834d }, + { 0x06, 0xae04 }, + { 0x06, 0x80e4 }, + { 0x06, 0x834d }, + { 0x06, 0xe083 }, + { 0x06, 0x4e78 }, + { 0x06, 0x039e }, + { 0x06, 0x0be0 }, + { 0x06, 0x834e }, + { 0x06, 0x7804 }, + { 0x06, 0x9e04 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e02 }, + { 0x06, 0xe083 }, + { 0x06, 0x32e1 }, + { 0x06, 0x8333 }, + { 0x06, 0x590f }, + { 0x06, 0xe283 }, + { 0x06, 0x4d0c }, + { 0x06, 0x245a }, + { 0x06, 0xf01e }, + { 0x06, 0x12e4 }, + { 0x06, 0xf88c }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8de0 }, + { 0x06, 0x8330 }, + { 0x06, 0xe183 }, + { 0x06, 0x3168 }, + { 0x06, 0x01e4 }, + { 0x06, 0xf88a }, + { 0x06, 0xe5f8 }, + { 0x06, 0x8bae }, + { 0x06, 0x37ee }, + { 0x06, 0x834e }, + { 0x06, 0x03e0 }, + { 0x06, 0x834c }, + { 0x06, 0xe183 }, + { 0x06, 0x4d1b }, + { 0x06, 0x019e }, + { 0x06, 0x04aa }, + { 0x06, 0xa1ae }, + { 0x06, 0xa8ee }, + { 0x06, 0x834e }, + { 0x06, 0x04ee }, + { 0x06, 0x834f }, + { 0x06, 0x00ae }, + { 0x06, 0xabe0 }, + { 0x06, 0x834f }, + { 0x06, 0x7803 }, + { 0x06, 0x9f14 }, + { 0x06, 0xee83 }, + { 0x06, 0x4e05 }, + { 0x06, 0xd240 }, + { 0x06, 0xd655 }, + { 0x06, 0x5402 }, + { 0x06, 0x81c6 }, + { 0x06, 0xd2a0 }, + { 0x06, 0xd6ba }, + { 0x06, 0x0002 }, + { 0x06, 0x81c6 }, + { 0x06, 0xfefd }, + { 0x06, 0xfc05 }, + { 0x06, 0xf8e0 }, + { 0x06, 0xf860 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x6168 }, + { 0x06, 0x02e4 }, + { 0x06, 0xf860 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x61e0 }, + { 0x06, 0xf848 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x4958 }, + { 0x06, 0x0f1e }, + { 0x06, 0x02e4 }, + { 0x06, 0xf848 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x49d0 }, + { 0x06, 0x0002 }, + { 0x06, 0x820a }, + { 0x06, 0xbf83 }, + { 0x06, 0x50ef }, + { 0x06, 0x46dc }, + { 0x06, 0x19dd }, + { 0x06, 0xd001 }, + { 0x06, 0x0282 }, + { 0x06, 0x0a02 }, + { 0x06, 0x8226 }, + { 0x06, 0xe0f8 }, + { 0x06, 0x60e1 }, + { 0x06, 0xf861 }, + { 0x06, 0x58fd }, + { 0x06, 0xe4f8 }, + { 0x06, 0x60e5 }, + { 0x06, 0xf861 }, + { 0x06, 0xfc04 }, + { 0x06, 0xf9fa }, + { 0x06, 0xfbc6 }, + { 0x06, 0xbff8 }, + { 0x06, 0x40be }, + { 0x06, 0x8350 }, + { 0x06, 0xa001 }, + { 0x06, 0x0107 }, + { 0x06, 0x1b89 }, + { 0x06, 0xcfd2 }, + { 0x06, 0x08eb }, + { 0x06, 0xdb19 }, + { 0x06, 0xb2fb }, + { 0x06, 0xfffe }, + { 0x06, 0xfd04 }, + { 0x06, 0xf8e0 }, + { 0x06, 0xf848 }, + { 0x06, 0xe1f8 }, + { 0x06, 0x4968 }, + { 0x06, 0x08e4 }, + { 0x06, 0xf848 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x4958 }, + { 0x06, 0xf7e4 }, + { 0x06, 0xf848 }, + { 0x06, 0xe5f8 }, + { 0x06, 0x49fc }, + { 0x06, 0x044d }, + { 0x06, 0x2000 }, + { 0x06, 0x024e }, + { 0x06, 0x2200 }, + { 0x06, 0x024d }, + { 0x06, 0xdfff }, + { 0x06, 0x014e }, + { 0x06, 0xddff }, + { 0x06, 0x0100 }, + { 0x05, 0x83d8 }, + { 0x06, 0x8000 }, + { 0x03, 0xdc00 }, + { 0x05, 0xfff6 }, + { 0x06, 0x00fc }, + { 0x1f, 0x0000 }, + + { 0x1f, 0x0000 }, + { 0x0d, 0xf880 }, + { 0x1f, 0x0000 } }; rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0)); - if (mdio_read(ioaddr, 0x06) == 0xc400) { - struct phy_reg phy_reg_init_1[] = { + if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x669a }, { 0x1f, 0x0005 }, - { 0x01, 0x0300 }, - { 0x1f, 0x0000 }, - { 0x11, 0x401c }, - { 0x16, 0x4100 }, + { 0x05, 0x8330 }, + { 0x06, 0x669a }, + + { 0x1f, 0x0002 } + }; + int val; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); + + val = mdio_read(ioaddr, 0x0d); + if ((val & 0x00ff) != 0x006c) { + u32 set[] = { + 0x0065, 0x0066, 0x0067, 0x0068, + 0x0069, 0x006a, 0x006b, 0x006c + }; + int i; + + mdio_write(ioaddr, 0x1f, 0x0002); + + val &= 0xff00; + for (i = 0; i < ARRAY_SIZE(set); i++) + mdio_write(ioaddr, 0x0d, val | set[i]); + } + } else { + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x05, 0x2642 }, { 0x1f, 0x0005 }, - { 0x07, 0x0010 }, - { 0x05, 0x83dc }, - { 0x06, 0x087d }, - { 0x05, 0x8300 }, - { 0x06, 0x0101 }, - { 0x06, 0x05f8 }, - { 0x06, 0xf9fa }, - { 0x06, 0xfbef }, - { 0x06, 0x79e2 }, - { 0x06, 0x835f }, - { 0x06, 0xe0f8 }, - { 0x06, 0x9ae1 }, - { 0x06, 0xf89b }, - { 0x06, 0xef31 }, - { 0x06, 0x3b65 }, - { 0x06, 0xaa07 }, - { 0x06, 0x81e4 }, - { 0x06, 0xf89a }, - { 0x06, 0xe5f8 }, - { 0x06, 0x9baf }, - { 0x06, 0x06ae }, - { 0x05, 0x83dc }, - { 0x06, 0x8300 }, + { 0x05, 0x8330 }, + { 0x06, 0x2642 } }; - rtl_phy_write(ioaddr, phy_reg_init_1, - ARRAY_SIZE(phy_reg_init_1)); + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); } - mdio_write(ioaddr, 0x1f, 0x0000); + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600); + mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000); + + mdio_write(ioaddr, 0x1f, 0x0001); + mdio_write(ioaddr, 0x17, 0x0cc0); + + mdio_write(ioaddr, 0x1f, 0x0002); + mdio_patch(ioaddr, 0x0f, 0x0017); + + rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1)); +} + +static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr) +{ + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0002 }, + { 0x10, 0x0008 }, + { 0x0d, 0x006c }, + + { 0x1f, 0x0000 }, + { 0x0d, 0xf880 }, + + { 0x1f, 0x0001 }, + { 0x17, 0x0cc0 }, + + { 0x1f, 0x0001 }, + { 0x0b, 0xa4d8 }, + { 0x09, 0x281c }, + { 0x07, 0x2883 }, + { 0x0a, 0x6b35 }, + { 0x1d, 0x3da4 }, + { 0x1c, 0xeffd }, + { 0x14, 0x7f52 }, + { 0x18, 0x7fc6 }, + { 0x08, 0x0601 }, + { 0x06, 0x4063 }, + { 0x10, 0xf074 }, + { 0x1f, 0x0003 }, + { 0x13, 0x0789 }, + { 0x12, 0xf4bd }, + { 0x1a, 0x04fd }, + { 0x14, 0x84b0 }, + { 0x1f, 0x0000 }, + { 0x00, 0x9200 }, + + { 0x1f, 0x0005 }, + { 0x01, 0x0340 }, + { 0x1f, 0x0001 }, + { 0x04, 0x4000 }, + { 0x03, 0x1d21 }, + { 0x02, 0x0c32 }, + { 0x01, 0x0200 }, + { 0x00, 0x5554 }, + { 0x04, 0x4800 }, + { 0x04, 0x4000 }, + { 0x04, 0xf000 }, + { 0x03, 0xdf01 }, + { 0x02, 0xdf20 }, + { 0x01, 0x101a }, + { 0x00, 0xa0ff }, + { 0x04, 0xf800 }, + { 0x04, 0xf000 }, + { 0x1f, 0x0000 }, + + { 0x1f, 0x0007 }, + { 0x1e, 0x0023 }, + { 0x16, 0x0000 }, + { 0x1f, 0x0000 } + }; + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); } static void rtl8102e_hw_phy_config(void __iomem *ioaddr) @@ -1792,7 +2664,13 @@ static void rtl_hw_phy_config(struct net_device *dev) rtl8168cp_2_hw_phy_config(ioaddr); break; case RTL_GIGA_MAC_VER_25: - rtl8168d_hw_phy_config(ioaddr); + rtl8168d_1_hw_phy_config(ioaddr); + break; + case RTL_GIGA_MAC_VER_26: + rtl8168d_2_hw_phy_config(ioaddr); + break; + case RTL_GIGA_MAC_VER_27: + rtl8168d_3_hw_phy_config(ioaddr); break; default: @@ -2322,6 +3200,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } rtl8169_init_phy(dev, tp); + + /* + * Pretend we are using VLANs; This bypasses a nasty bug where + * Interrupts stop flowing on high load on 8110SCd controllers. + */ + if (tp->mac_version == RTL_GIGA_MAC_VER_05) + RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan); + device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL); out: @@ -2349,6 +3235,10 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) flush_scheduled_work(); unregister_netdev(dev); + + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); + rtl_disable_msi(pdev, tp); rtl8169_release_board(pdev, dev, tp->mmio_addr); pci_set_drvdata(pdev, NULL); @@ -2357,9 +3247,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, struct net_device *dev) { - unsigned int mtu = dev->mtu; + unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE; } static int rtl8169_open(struct net_device *dev) @@ -2493,7 +3383,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr) static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) { /* Low hurts. Let's disable the filtering. */ - RTL_W16(RxMaxSize, rx_buf_sz); + RTL_W16(RxMaxSize, rx_buf_sz + 1); } static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) @@ -2863,6 +3753,8 @@ static void rtl_hw_start_8168(struct net_device *dev) break; case RTL_GIGA_MAC_VER_25: + case RTL_GIGA_MAC_VER_26: + case RTL_GIGA_MAC_VER_27: rtl_hw_start_8168d(ioaddr, pdev); break; @@ -3993,6 +4885,9 @@ static void rtl_shutdown(struct pci_dev *pdev) rtl8169_net_suspend(dev); + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); + spin_lock_irq(&tp->lock); rtl8169_asic_down(ioaddr); diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ddccf5fa56b..0dd7839322b 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp) /* Restore the PCI state saved during initialization. */ pci_restore_state(sp->pdev); + pci_save_state(sp->pdev); pci_read_config_word(sp->pdev, 0x2, &val16); if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) break; diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c index ee366c5a8fa..c9c70ab0cce 100644 --- a/drivers/net/sb1000.c +++ b/drivers/net/sb1000.c @@ -36,6 +36,7 @@ static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n"; #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/interrupt.h> #include <linux/errno.h> diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 01f9432c31e..98bff5ada09 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -444,7 +444,8 @@ static void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, * the appropriate LRO method */ static void efx_rx_packet_lro(struct efx_channel *channel, - struct efx_rx_buffer *rx_buf) + struct efx_rx_buffer *rx_buf, + bool checksummed) { struct napi_struct *napi = &channel->napi_str; @@ -466,7 +467,8 @@ static void efx_rx_packet_lro(struct efx_channel *channel, skb->len = rx_buf->len; skb->data_len = rx_buf->len; skb->truesize += rx_buf->len; - skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->ip_summed = + checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE; napi_gro_frags(napi); @@ -475,6 +477,7 @@ out: rx_buf->page = NULL; } else { EFX_BUG_ON_PARANOID(!rx_buf->skb); + EFX_BUG_ON_PARANOID(!checksummed); napi_gro_receive(napi, rx_buf->skb); rx_buf->skb = NULL; @@ -570,7 +573,7 @@ void __efx_rx_packet(struct efx_channel *channel, } if (likely(checksummed || rx_buf->page)) { - efx_rx_packet_lro(channel, rx_buf); + efx_rx_packet_lro(channel, rx_buf, checksummed); goto done; } diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad49b5..49eb91b5f50 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index ecf3279fbef..f4dfd1f679a 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -826,7 +826,7 @@ static int __exit sgiseeq_remove(struct platform_device *pdev) static struct platform_driver sgiseeq_driver = { .probe = sgiseeq_probe, - .remove = __devexit_p(sgiseeq_remove), + .remove = __exit_p(sgiseeq_remove), .driver = { .name = "sgiseeq", .owner = THIS_MODULE, diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index f49d0800c1d..528b912a4b0 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -30,6 +30,7 @@ #include <linux/phy.h> #include <linux/cache.h> #include <linux/io.h> +#include <asm/cacheflush.h> #include "sh_eth.h" diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 97949d0a699..c072f7f36ac 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -52,6 +52,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/timer.h> #include <linux/errno.h> diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 38a508b4aad..b27156eaf26 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -73,6 +73,7 @@ static const char * const boot_msg = /* Include files */ +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 55bad408196..8f5414348e8 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -37,6 +37,7 @@ #include <linux/crc32.h> #include <linux/dma-mapping.h> #include <linux/debugfs.h> +#include <linux/sched.h> #include <linux/seq_file.h> #include <linux/mii.h> #include <asm/irq.h> @@ -3935,11 +3936,14 @@ static int __devinit skge_probe(struct pci_dev *pdev, #endif err = -ENOMEM; - hw = kzalloc(sizeof(*hw), GFP_KERNEL); + /* space for skge@pci:0000:04:00.0 */ + hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:" ) + + strlen(pci_name(pdev)) + 1, GFP_KERNEL); if (!hw) { dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->pdev = pdev; spin_lock_init(&hw->hw_lock); @@ -3974,7 +3978,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw); + err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, hw->irq_name, hw); if (err) { dev_err(&pdev->dev, "%s: cannot assign irq %d\n", dev->name, pdev->irq); @@ -3982,14 +3986,17 @@ static int __devinit skge_probe(struct pci_dev *pdev, } skge_show_addr(dev); - if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) { - if (register_netdev(dev1) == 0) + if (hw->ports > 1) { + dev1 = skge_devinit(hw, 1, using_dac); + if (dev1 && register_netdev(dev1) == 0) skge_show_addr(dev1); else { /* Failure to register second port need not be fatal */ dev_warn(&pdev->dev, "register of second port failed\n"); hw->dev[1] = NULL; - free_netdev(dev1); + hw->ports = 1; + if (dev1) + free_netdev(dev1); } } pci_set_drvdata(pdev, hw); diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 17caccbb768..831de1b6e96 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -2423,6 +2423,8 @@ struct skge_hw { u16 phy_addr; spinlock_t phy_lock; struct tasklet_struct phy_task; + + char irq_name[0]; /* skge@pci:000:04:00.0 */ }; enum pause_control { diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ef1165718dd..6a10d7ba587 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4487,13 +4487,16 @@ static int __devinit sky2_probe(struct pci_dev *pdev, wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; err = -ENOMEM; - hw = kzalloc(sizeof(*hw), GFP_KERNEL); + + hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") + + strlen(pci_name(pdev)) + 1, GFP_KERNEL); if (!hw) { dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } hw->pdev = pdev; + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { @@ -4535,11 +4538,13 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + netif_carrier_off(dev); + netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT); err = request_irq(pdev->irq, sky2_intr, (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, - dev->name, hw); + hw->irq_name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); goto err_out_unregister; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index e0f23a10104..ed54129698b 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2085,6 +2085,8 @@ struct sky2_hw { struct timer_list watchdog_timer; struct work_struct restart_work; wait_queue_head_t msi_wait; + + char irq_name[0]; }; static inline int sky2_is_copper(const struct sky2_hw *hw) diff --git a/drivers/net/slip.c b/drivers/net/slip.c index e17c535a577..fe3cebb984d 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -67,6 +67,7 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <linux/bitops.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/interrupt.h> diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 05c91ee6921..f12206bdbb7 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2283,7 +2283,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev) ndev->irq = ires->start; - if (ires->flags & IRQF_TRIGGER_MASK) + if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) irq_flags = ires->flags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ccdd196f529..f9cdcbcb77d 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) struct net_device *dev = pdata->dev; int npackets = 0; - while (likely(netif_running(dev)) && (npackets < budget)) { + while (npackets < budget) { unsigned int pktlength; unsigned int pktwords; struct sk_buff *skb; diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index b4909a2dec6..0f790927623 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -252,6 +252,9 @@ static int smsc9420_ethtool_get_settings(struct net_device *dev, { struct smsc9420_pdata *pd = netdev_priv(dev); + if (!pd->phy_dev) + return -ENODEV; + cmd->maxtxpkt = 1; cmd->maxrxpkt = 1; return phy_ethtool_gset(pd->phy_dev, cmd); @@ -262,6 +265,9 @@ static int smsc9420_ethtool_set_settings(struct net_device *dev, { struct smsc9420_pdata *pd = netdev_priv(dev); + if (!pd->phy_dev) + return -ENODEV; + return phy_ethtool_sset(pd->phy_dev, cmd); } @@ -290,6 +296,10 @@ static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data) static int smsc9420_ethtool_nway_reset(struct net_device *netdev) { struct smsc9420_pdata *pd = netdev_priv(netdev); + + if (!pd->phy_dev) + return -ENODEV; + return phy_start_aneg(pd->phy_dev); } @@ -312,6 +322,10 @@ smsc9420_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, for (i = 0; i < 0x100; i += (sizeof(u32))) data[j++] = smsc9420_reg_read(pd, i); + // cannot read phy registers if the net device is down + if (!phy_dev) + return; + for (i = 0; i <= 31; i++) data[j++] = smsc9420_mii_read(phy_dev->bus, phy_dev->addr, i); } diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig new file mode 100644 index 00000000000..35eaa5251d7 --- /dev/null +++ b/drivers/net/stmmac/Kconfig @@ -0,0 +1,53 @@ +config STMMAC_ETH + tristate "STMicroelectronics 10/100/1000 Ethernet driver" + select MII + select PHYLIB + depends on NETDEVICES && CPU_SUBTYPE_ST40 + help + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet + controllers. ST Ethernet IPs are built around a Synopsys IP Core. + +if STMMAC_ETH + +config STMMAC_DA + bool "STMMAC DMA arbitration scheme" + default n + help + Selecting this option, rx has priority over Tx (only for Giga + Ethernet device). + By default, the DMA arbitration scheme is based on Round-robin + (rx:tx priority is 1:1). + +config STMMAC_DUAL_MAC + bool "STMMAC: dual mac support (EXPERIMENTAL)" + default n + depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER + help + Some ST SoCs (for example the stx7141 and stx7200c2) have two + Ethernet Controllers. This option turns on the second Ethernet + device on this kind of platforms. + +config STMMAC_TIMER + bool "STMMAC Timer optimisation" + default n + help + Use an external timer for mitigating the number of network + interrupts. + +choice + prompt "Select Timer device" + depends on STMMAC_TIMER + +config STMMAC_TMU_TIMER + bool "TMU channel 2" + depends on CPU_SH4 + help + +config STMMAC_RTC_TIMER + bool "Real time clock" + depends on RTC_CLASS + help + +endchoice + +endif diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile new file mode 100644 index 00000000000..b2d7a5564df --- /dev/null +++ b/drivers/net/stmmac/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_STMMAC_ETH) += stmmac.o +stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o +stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \ + mac100.o gmac.o $(stmmac-y) diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h new file mode 100644 index 00000000000..e49e5188e88 --- /dev/null +++ b/drivers/net/stmmac/common.h @@ -0,0 +1,330 @@ +/******************************************************************************* + STMMAC Common Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include "descs.h" +#include <linux/io.h> + +/* ********************************************* + DMA CRS Control and Status Register Mapping + * *********************************************/ +#define DMA_BUS_MODE 0x00001000 /* Bus Mode */ +#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ +#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */ +#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */ +#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */ +#define DMA_STATUS 0x00001014 /* Status Register */ +#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */ +#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */ +#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */ +#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */ +#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */ + +/* ******************************** + DMA Control register defines + * ********************************/ +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ + +/* ************************************** + DMA Interrupt Enable register defines + * **************************************/ +/**** NORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */ +#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */ +#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */ +#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */ + +#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \ + DMA_INTR_ENA_TIE) + +/**** ABNORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */ +#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */ +#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */ +#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */ +#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */ +#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */ +#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */ +#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */ +#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */ + +#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \ + DMA_INTR_ENA_UNE) + +/* DMA default interrupt mask */ +#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL) + +/* **************************** + * DMA Status register defines + * ****************************/ +#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */ +#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */ +#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */ +#define DMA_STATUS_GMI 0x08000000 +#define DMA_STATUS_GLI 0x04000000 +#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */ +#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */ +#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */ +#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */ +#define DMA_STATUS_TS_SHIFT 20 +#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */ +#define DMA_STATUS_RS_SHIFT 17 +#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */ +#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */ +#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */ +#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */ +#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */ +#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */ +#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */ +#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */ +#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */ +#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */ +#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */ +#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */ +#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */ + +/* Other defines */ +#define HASH_TABLE_SIZE 64 +#define PAUSE_TIME 0x200 + +/* Flow Control defines */ +#define FLOW_OFF 0 +#define FLOW_RX 1 +#define FLOW_TX 2 +#define FLOW_AUTO (FLOW_TX | FLOW_RX) + +/* DMA STORE-AND-FORWARD Operation Mode */ +#define SF_DMA_MODE 1 + +#define HW_CSUM 1 +#define NO_HW_CSUM 0 + +/* GMAC TX FIFO is 8K, Rx FIFO is 16K */ +#define BUF_SIZE_16KiB 16384 +#define BUF_SIZE_8KiB 8192 +#define BUF_SIZE_4KiB 4096 +#define BUF_SIZE_2KiB 2048 + +/* Power Down and WOL */ +#define PMT_NOT_SUPPORTED 0 +#define PMT_SUPPORTED 1 + +/* Common MAC defines */ +#define MAC_CTRL_REG 0x00000000 /* MAC Control */ +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ +#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */ + +/* MAC Management Counters register */ +#define MMC_CONTROL 0x00000100 /* MMC Control */ +#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */ +#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */ +#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */ +#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */ + +#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */ +#define MMC_CONTROL_MAX_FRM_SHIFT 3 +#define MMC_CONTROL_MAX_FRAME 0x7FF + +struct stmmac_extra_stats { + /* Transmit errors */ + unsigned long tx_underflow ____cacheline_aligned; + unsigned long tx_carrier; + unsigned long tx_losscarrier; + unsigned long tx_heartbeat; + unsigned long tx_deferred; + unsigned long tx_vlan; + unsigned long tx_jabber; + unsigned long tx_frame_flushed; + unsigned long tx_payload_error; + unsigned long tx_ip_header_error; + /* Receive errors */ + unsigned long rx_desc; + unsigned long rx_partial; + unsigned long rx_runt; + unsigned long rx_toolong; + unsigned long rx_collision; + unsigned long rx_crc; + unsigned long rx_lenght; + unsigned long rx_mii; + unsigned long rx_multicast; + unsigned long rx_gmac_overflow; + unsigned long rx_watchdog; + unsigned long da_rx_filter_fail; + unsigned long sa_rx_filter_fail; + unsigned long rx_missed_cntr; + unsigned long rx_overflow_cntr; + unsigned long rx_vlan; + /* Tx/Rx IRQ errors */ + unsigned long tx_undeflow_irq; + unsigned long tx_process_stopped_irq; + unsigned long tx_jabber_irq; + unsigned long rx_overflow_irq; + unsigned long rx_buf_unav_irq; + unsigned long rx_process_stopped_irq; + unsigned long rx_watchdog_irq; + unsigned long tx_early_irq; + unsigned long fatal_bus_error_irq; + /* Extra info */ + unsigned long threshold; + unsigned long tx_pkt_n; + unsigned long rx_pkt_n; + unsigned long poll_n; + unsigned long sched_timer_n; + unsigned long normal_irq_n; +}; + +/* GMAC core can compute the checksums in HW. */ +enum rx_frame_status { + good_frame = 0, + discard_frame = 1, + csum_none = 2, +}; + +static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6], + unsigned int high, unsigned int low) +{ + unsigned long data; + + data = (addr[5] << 8) | addr[4]; + writel(data, ioaddr + high); + data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + writel(data, ioaddr + low); + + return; +} + +static inline void stmmac_get_mac_addr(unsigned long ioaddr, + unsigned char *addr, unsigned int high, + unsigned int low) +{ + unsigned int hi_addr, lo_addr; + + /* Read the MAC address from the hardware */ + hi_addr = readl(ioaddr + high); + lo_addr = readl(ioaddr + low); + + /* Extract the MAC address from the high and low words */ + addr[0] = lo_addr & 0xff; + addr[1] = (lo_addr >> 8) & 0xff; + addr[2] = (lo_addr >> 16) & 0xff; + addr[3] = (lo_addr >> 24) & 0xff; + addr[4] = hi_addr & 0xff; + addr[5] = (hi_addr >> 8) & 0xff; + + return; +} + +struct stmmac_ops { + /* MAC core initialization */ + void (*core_init) (unsigned long ioaddr) ____cacheline_aligned; + /* DMA core initialization */ + int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx); + /* Dump MAC registers */ + void (*dump_mac_regs) (unsigned long ioaddr); + /* Dump DMA registers */ + void (*dump_dma_regs) (unsigned long ioaddr); + /* Set tx/rx threshold in the csr6 register + * An invalid value enables the store-and-forward mode */ + void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode); + /* To track extra statistic (if supported) */ + void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr); + /* RX descriptor ring initialization */ + void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic); + /* TX descriptor ring initialization */ + void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size); + + /* Invoked by the xmit function to prepare the tx descriptor */ + void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len, + int csum_flag); + /* Set/get the owner of the descriptor */ + void (*set_tx_owner) (struct dma_desc *p); + int (*get_tx_owner) (struct dma_desc *p); + /* Invoked by the xmit function to close the tx descriptor */ + void (*close_tx_desc) (struct dma_desc *p); + /* Clean the tx descriptor as soon as the tx irq is received */ + void (*release_tx_desc) (struct dma_desc *p); + /* Clear interrupt on tx frame completion. When this bit is + * set an interrupt happens as soon as the frame is transmitted */ + void (*clear_tx_ic) (struct dma_desc *p); + /* Last tx segment reports the transmit status */ + int (*get_tx_ls) (struct dma_desc *p); + /* Return the transmit status looking at the TDES1 */ + int (*tx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr); + /* Get the buffer size from the descriptor */ + int (*get_tx_len) (struct dma_desc *p); + /* Handle extra events on specific interrupts hw dependent */ + void (*host_irq_status) (unsigned long ioaddr); + int (*get_rx_owner) (struct dma_desc *p); + void (*set_rx_owner) (struct dma_desc *p); + /* Get the receive frame size */ + int (*get_rx_frame_len) (struct dma_desc *p); + /* Return the reception status looking at the RDES1 */ + int (*rx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p); + /* Multicast filter setting */ + void (*set_filter) (struct net_device *dev); + /* Flow control setting */ + void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time); + /* Set power management mode (e.g. magic frame) */ + void (*pmt) (unsigned long ioaddr, unsigned long mode); + /* Set/Get Unicast MAC addresses */ + void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); + void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); +}; + +struct mac_link { + int port; + int duplex; + int speed; +}; + +struct mii_regs { + unsigned int addr; /* MII Address */ + unsigned int data; /* MII Data */ +}; + +struct hw_cap { + unsigned int version; /* Core Version register (GMAC) */ + unsigned int pmt; /* Power-Down mode (GMAC) */ + struct mac_link link; + struct mii_regs mii; +}; + +struct mac_device_info { + struct hw_cap hw; + struct stmmac_ops *ops; +}; + +struct mac_device_info *gmac_setup(unsigned long addr); +struct mac_device_info *mac100_setup(unsigned long addr); diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h new file mode 100644 index 00000000000..6d2a0b2f5e5 --- /dev/null +++ b/drivers/net/stmmac/descs.h @@ -0,0 +1,163 @@ +/******************************************************************************* + Header File to describe the DMA descriptors + Use enhanced descriptors in case of GMAC Cores. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ +struct dma_desc { + /* Receive descriptor */ + union { + struct { + /* RDES0 */ + u32 reserved1:1; + u32 crc_error:1; + u32 dribbling:1; + u32 mii_error:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 collision:1; + u32 frame_too_long:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 multicast_frame:1; + u32 run_frame:1; + u32 length_error:1; + u32 partial_frame_error:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 filtering_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved2:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 reserved3:5; + u32 disable_ic:1; + } rx; + struct { + /* RDES0 */ + u32 payload_csum_error:1; + u32 crc_error:1; + u32 dribbling:1; + u32 error_gmii:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 late_collision:1; + u32 ipc_csum_error:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 vlan_tag:1; + u32 overflow_error:1; + u32 length_error:1; + u32 sa_filter_fail:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 da_filter_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:13; + u32 reserved1:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 buffer2_size:13; + u32 reserved2:2; + u32 disable_ic:1; + } erx; /* -- enhanced -- */ + + /* Transmit descriptor */ + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 heartbeat_fail:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 reserved1:3; + u32 error_summary:1; + u32 reserved2:15; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved3:1; + u32 disable_padding:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 crc_disable:1; + u32 reserved4:2; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + } tx; + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 vlan_frame:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 payload_error:1; + u32 frame_flushed:1; + u32 jabber_timeout:1; + u32 error_summary:1; + u32 ip_header_error:1; + u32 time_stamp_status:1; + u32 reserved1:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 checksum_insertion:2; + u32 reserved2:1; + u32 time_stamp_enable:1; + u32 disable_padding:1; + u32 crc_disable:1; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:13; + u32 reserved3:3; + u32 buffer2_size:13; + u32 reserved4:3; + } etx; /* -- enhanced -- */ + } des01; + unsigned int des2; + unsigned int des3; +}; + +/* Transmit checksum insertion control */ +enum tdes_csum_insertion { + cic_disabled = 0, /* Checksum Insertion Control */ + cic_only_ip = 1, /* Only IP header */ + cic_no_pseudoheader = 2, /* IP header but pseudoheader + * is not calculated */ + cic_full = 3, /* IP header and pseudoheader */ +}; diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c new file mode 100644 index 00000000000..b624bb5bae0 --- /dev/null +++ b/drivers/net/stmmac/gmac.c @@ -0,0 +1,693 @@ +/******************************************************************************* + This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. + DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for + developing this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" +#include "gmac.h" + +#undef GMAC_DEBUG +/*#define GMAC_DEBUG*/ +#undef FRAME_FILTER_DEBUG +/*#define FRAME_FILTER_DEBUG*/ +#ifdef GMAC_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void gmac_dump_regs(unsigned long ioaddr) +{ + int i; + pr_info("\t----------------------------------------------\n" + "\t GMAC registers (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + + for (i = 0; i < 55; i++) { + int offset = i * 4; + pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i, + offset, readl(ioaddr + offset)); + } + return; +} + +static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL | + ((pbl << DMA_BUS_MODE_PBL_SHIFT) | + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + +#ifdef CONFIG_STMMAC_DA + value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */ +#endif + writel(value, ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Transmit FIFO flush operation */ +static void gmac_flush_tx_fifo(unsigned long ioaddr) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL); + + do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF)); +} + +static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n"); + /* Transmit COE type 2 cannot be done in cut-through mode. */ + csr6 |= DMA_CONTROL_TSF; + /* Operating on second frame increase the performance + * especially when transmit store-and-forward is used.*/ + csr6 |= DMA_CONTROL_OSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode" + " (threshold = %d)\n", txmode); + csr6 &= ~DMA_CONTROL_TSF; + csr6 &= DMA_CONTROL_TC_TX_MASK; + /* Set the transmit threashold */ + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else if (txmode <= 128) + csr6 |= DMA_CONTROL_TTC_128; + else if (txmode <= 192) + csr6 |= DMA_CONTROL_TTC_192; + else + csr6 |= DMA_CONTROL_TTC_256; + } + + if (rxmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n"); + csr6 |= DMA_CONTROL_RSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode" + " (threshold = %d)\n", rxmode); + csr6 &= ~DMA_CONTROL_RSF; + csr6 &= DMA_CONTROL_TC_RX_MASK; + if (rxmode <= 32) + csr6 |= DMA_CONTROL_RTC_32; + else if (rxmode <= 64) + csr6 |= DMA_CONTROL_RTC_64; + else if (rxmode <= 96) + csr6 |= DMA_CONTROL_RTC_96; + else + csr6 |= DMA_CONTROL_RTC_128; + } + + writel(csr6, ioaddr + DMA_CONTROL); + return; +} + +/* Not yet implemented --- no RMON module */ +static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + return; +} + +static void gmac_dump_dma_regs(unsigned long ioaddr) +{ + int i; + pr_info(" DMA registers\n"); + for (i = 0; i < 22; i++) { + if ((i < 9) || (i > 17)) { + int offset = i * 4; + pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + offset), + readl(ioaddr + DMA_BUS_MODE + offset)); + } + } + return; +} + +static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.etx.error_summary)) { + DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx); + if (unlikely(p->des01.etx.jabber_timeout)) { + DBG(KERN_ERR "\tjabber_timeout error\n"); + x->tx_jabber++; + } + + if (unlikely(p->des01.etx.frame_flushed)) { + DBG(KERN_ERR "\tframe_flushed error\n"); + x->tx_frame_flushed++; + gmac_flush_tx_fifo(ioaddr); + } + + if (unlikely(p->des01.etx.loss_carrier)) { + DBG(KERN_ERR "\tloss_carrier error\n"); + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.no_carrier)) { + DBG(KERN_ERR "\tno_carrier error\n"); + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_collisions)) { + DBG(KERN_ERR "\texcessive_collisions\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_deferral)) { + DBG(KERN_INFO "\texcessive tx_deferral\n"); + x->tx_deferred++; + } + + if (unlikely(p->des01.etx.underflow_error)) { + DBG(KERN_ERR "\tunderflow error\n"); + gmac_flush_tx_fifo(ioaddr); + x->tx_underflow++; + } + + if (unlikely(p->des01.etx.ip_header_error)) { + DBG(KERN_ERR "\tTX IP header csum error\n"); + x->tx_ip_header_error++; + } + + if (unlikely(p->des01.etx.payload_error)) { + DBG(KERN_ERR "\tAddr/Payload csum error\n"); + x->tx_payload_error++; + gmac_flush_tx_fifo(ioaddr); + } + + ret = -1; + } + + if (unlikely(p->des01.etx.deferred)) { + DBG(KERN_INFO "GMAC TX status: tx deferred\n"); + x->tx_deferred++; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.etx.vlan_frame) { + DBG(KERN_INFO "GMAC TX status: VLAN frame\n"); + x->tx_vlan++; + } +#endif + + return ret; +} + +static int gmac_get_tx_len(struct dma_desc *p) +{ + return p->des01.etx.buffer1_size; +} + +static int gmac_coe_rdes0(int ipc_err, int type, int payload_err) +{ + int ret = good_frame; + u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7; + + /* bits 5 7 0 | Frame status + * ---------------------------------------------------------- + * 0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects) + * 1 0 0 | IPv4/6 No CSUM errorS. + * 1 0 1 | IPv4/6 CSUM PAYLOAD error + * 1 1 0 | IPv4/6 CSUM IP HR error + * 1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS + * 0 0 1 | IPv4/6 unsupported IP PAYLOAD + * 0 1 1 | COE bypassed.. no IPv4/6 frame + * 0 1 0 | Reserved. + */ + if (status == 0x0) { + DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n"); + ret = good_frame; + } else if (status == 0x4) { + DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n"); + ret = good_frame; + } else if (status == 0x5) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n"); + ret = csum_none; + } else if (status == 0x6) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n"); + ret = csum_none; + } else if (status == 0x7) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 Header and Payload Error.\n"); + ret = csum_none; + } else if (status == 0x1) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n"); + ret = discard_frame; + } else if (status == 0x3) { + DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n"); + ret = discard_frame; + } + return ret; +} + +static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = good_frame; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.erx.error_summary)) { + DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx); + if (unlikely(p->des01.erx.descriptor_error)) { + DBG(KERN_ERR "\tdescriptor error\n"); + x->rx_desc++; + stats->rx_length_errors++; + } + if (unlikely(p->des01.erx.overflow_error)) { + DBG(KERN_ERR "\toverflow error\n"); + x->rx_gmac_overflow++; + } + + if (unlikely(p->des01.erx.ipc_csum_error)) + DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n"); + + if (unlikely(p->des01.erx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions++; + stats->collisions++; + } + if (unlikely(p->des01.erx.receive_watchdog)) { + DBG(KERN_ERR "\treceive_watchdog error\n"); + x->rx_watchdog++; + } + if (unlikely(p->des01.erx.error_gmii)) { + DBG(KERN_ERR "\tReceive Error\n"); + x->rx_mii++; + } + if (unlikely(p->des01.erx.crc_error)) { + DBG(KERN_ERR "\tCRC error\n"); + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + + /* After a payload csum error, the ES bit is set. + * It doesn't match with the information reported into the databook. + * At any rate, we need to understand if the CSUM hw computation is ok + * and report this info to the upper layers. */ + ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error, + p->des01.erx.frame_type, p->des01.erx.payload_csum_error); + + if (unlikely(p->des01.erx.dribbling)) { + DBG(KERN_ERR "GMAC RX: dribbling error\n"); + ret = discard_frame; + } + if (unlikely(p->des01.erx.sa_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Source Address filter fail\n"); + x->sa_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.da_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n"); + x->da_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.length_error)) { + DBG(KERN_ERR "GMAC RX: length_error error\n"); + x->rx_lenght++; + ret = discard_frame; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.erx.vlan_tag) { + DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n"); + x->rx_vlan++; + } +#endif + return ret; +} + +static void gmac_irq_status(unsigned long ioaddr) +{ + u32 intr_status = readl(ioaddr + GMAC_INT_STATUS); + + /* Not used events (e.g. MMC interrupts) are not handled. */ + if ((intr_status & mmc_tx_irq)) + DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_TX_INTR)); + if (unlikely(intr_status & mmc_rx_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_INTR)); + if (unlikely(intr_status & mmc_rx_csum_offload_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD)); + if (unlikely(intr_status & pmt_irq)) { + DBG(KERN_DEBUG "GMAC: received Magic frame\n"); + /* clear the PMT bits 5 and 6 by reading the PMT + * status register. */ + readl(ioaddr + GMAC_PMT); + } + + return; +} + +static void gmac_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + GMAC_CONTROL); + value |= GMAC_CORE_INIT; + writel(value, ioaddr + GMAC_CONTROL); + + /* STBus Bridge Configuration */ + /*writel(0xc5608, ioaddr + 0x00007000);*/ + + /* Freeze MMC counters */ + writel(0x8, ioaddr + GMAC_MMC_CTRL); + /* Mask GMAC interrupts */ + writel(0x207, ioaddr + GMAC_INT_MASK); + +#ifdef STMMAC_VLAN_TAG_USED + /* Tag detection without filtering */ + writel(0x0, ioaddr + GMAC_VLAN_TAG); +#endif + return; +} + +static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int value = 0; + + DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n", + __func__, dev->mc_count, dev->uc_count); + + if (dev->flags & IFF_PROMISC) + value = GMAC_FRAME_FILTER_PR; + else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value = GMAC_FRAME_FILTER_PM; /* pass all multi */ + writel(0xffffffff, ioaddr + GMAC_HASH_HIGH); + writel(0xffffffff, ioaddr + GMAC_HASH_LOW); + } else if (dev->mc_count > 0) { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Hash filter for multicast */ + value = GMAC_FRAME_FILTER_HMC; + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + index the contens of the hash table */ + int bit_nr = + bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + GMAC_HASH_LOW); + writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH); + } + + /* Handle multiple unicast addresses (perfect filtering)*/ + if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES) + /* Switch to promiscuous mode is more than 16 addrs + are required */ + value |= GMAC_FRAME_FILTER_PR; + else { + int i; + struct dev_addr_list *uc_ptr = dev->uc_list; + + for (i = 0; i < dev->uc_count; i++) { + gmac_set_umac_addr(ioaddr, uc_ptr->da_addr, + i + 1); + + DBG(KERN_INFO "\t%d " + "- Unicast addr %02x:%02x:%02x:%02x:%02x:" + "%02x\n", i + 1, + uc_ptr->da_addr[0], uc_ptr->da_addr[1], + uc_ptr->da_addr[2], uc_ptr->da_addr[3], + uc_ptr->da_addr[4], uc_ptr->da_addr[5]); + uc_ptr = uc_ptr->next; + } + } + +#ifdef FRAME_FILTER_DEBUG + /* Enable Receive all mode (to debug filtering_fail errors) */ + value |= GMAC_FRAME_FILTER_RA; +#endif + writel(value, ioaddr + GMAC_FRAME_FILTER); + + DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: " + "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER), + readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW)); + + return; +} + +static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = 0; + + DBG(KERN_DEBUG "GMAC Flow-Control:\n"); + if (fc & FLOW_RX) { + DBG(KERN_DEBUG "\tReceive Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_RFE; + } + if (fc & FLOW_TX) { + DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_TFE; + } + + if (duplex) { + DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time); + flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT); + } + + writel(flow, ioaddr + GMAC_FLOW_CTRL); + return; +} + +static void gmac_pmt(unsigned long ioaddr, unsigned long mode) +{ + unsigned int pmt = 0; + + if (mode == WAKE_MAGIC) { + DBG(KERN_DEBUG "GMAC: WOL Magic frame\n"); + pmt |= power_down | magic_pkt_en; + } else if (mode == WAKE_UCAST) { + DBG(KERN_DEBUG "GMAC: WOL on global unicast\n"); + pmt |= global_unicast; + } + + writel(pmt, ioaddr + GMAC_PMT); + return; +} + +static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.erx.own = 1; + p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1; + /* To support jumbo frames */ + p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1; + if (i == ring_size - 1) + p->des01.erx.end_ring = 1; + if (disable_rx_ic) + p->des01.erx.disable_ic = 1; + p++; + } + return; +} + +static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + + for (i = 0; i < ring_size; i++) { + p->des01.etx.own = 0; + if (i == ring_size - 1) + p->des01.etx.end_ring = 1; + p++; + } + + return; +} + +static int gmac_get_tx_owner(struct dma_desc *p) +{ + return p->des01.etx.own; +} + +static int gmac_get_rx_owner(struct dma_desc *p) +{ + return p->des01.erx.own; +} + +static void gmac_set_tx_owner(struct dma_desc *p) +{ + p->des01.etx.own = 1; +} + +static void gmac_set_rx_owner(struct dma_desc *p) +{ + p->des01.erx.own = 1; +} + +static int gmac_get_tx_ls(struct dma_desc *p) +{ + return p->des01.etx.last_segment; +} + +static void gmac_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.etx.end_ring; + + memset(p, 0, sizeof(struct dma_desc)); + p->des01.etx.end_ring = ter; + + return; +} + +static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.etx.first_segment = is_fs; + if (unlikely(len > BUF_SIZE_4KiB)) { + p->des01.etx.buffer1_size = BUF_SIZE_4KiB; + p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB; + } else { + p->des01.etx.buffer1_size = len; + } + if (likely(csum_flag)) + p->des01.etx.checksum_insertion = cic_full; +} + +static void gmac_clear_tx_ic(struct dma_desc *p) +{ + p->des01.etx.interrupt = 0; +} + +static void gmac_close_tx_desc(struct dma_desc *p) +{ + p->des01.etx.last_segment = 1; + p->des01.etx.interrupt = 1; +} + +static int gmac_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.erx.frame_length; +} + +struct stmmac_ops gmac_driver = { + .core_init = gmac_core_init, + .dump_mac_regs = gmac_dump_regs, + .dma_init = gmac_dma_init, + .dump_dma_regs = gmac_dump_dma_regs, + .dma_mode = gmac_dma_operation_mode, + .dma_diagnostic_fr = gmac_dma_diagnostic_fr, + .tx_status = gmac_get_tx_frame_status, + .rx_status = gmac_get_rx_frame_status, + .get_tx_len = gmac_get_tx_len, + .set_filter = gmac_set_filter, + .flow_ctrl = gmac_flow_ctrl, + .pmt = gmac_pmt, + .init_rx_desc = gmac_init_rx_desc, + .init_tx_desc = gmac_init_tx_desc, + .get_tx_owner = gmac_get_tx_owner, + .get_rx_owner = gmac_get_rx_owner, + .release_tx_desc = gmac_release_tx_desc, + .prepare_tx_desc = gmac_prepare_tx_desc, + .clear_tx_ic = gmac_clear_tx_ic, + .close_tx_desc = gmac_close_tx_desc, + .get_tx_ls = gmac_get_tx_ls, + .set_tx_owner = gmac_set_tx_owner, + .set_rx_owner = gmac_set_rx_owner, + .get_rx_frame_len = gmac_get_rx_frame_len, + .host_irq_status = gmac_irq_status, + .set_umac_addr = gmac_set_umac_addr, + .get_umac_addr = gmac_get_umac_addr, +}; + +struct mac_device_info *gmac_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + u32 uid = readl(ioaddr + GMAC_VERSION); + + pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n", + ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff)); + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + mac->ops = &gmac_driver; + mac->hw.pmt = PMT_SUPPORTED; + mac->hw.link.port = GMAC_CONTROL_PS; + mac->hw.link.duplex = GMAC_CONTROL_DM; + mac->hw.link.speed = GMAC_CONTROL_FES; + mac->hw.mii.addr = GMAC_MII_ADDR; + mac->hw.mii.data = GMAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h new file mode 100644 index 00000000000..684a363120a --- /dev/null +++ b/drivers/net/stmmac/gmac.h @@ -0,0 +1,204 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#define GMAC_CONTROL 0x00000000 /* Configuration */ +#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */ +#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ +#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ +#define GMAC_MII_ADDR 0x00000010 /* MII Address */ +#define GMAC_MII_DATA 0x00000014 /* MII Data */ +#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */ +#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */ +#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */ +#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */ + +#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ +enum gmac_irq_status { + time_stamp_irq = 0x0200, + mmc_rx_csum_offload_irq = 0x0080, + mmc_tx_irq = 0x0040, + mmc_rx_irq = 0x0020, + mmc_irq = 0x0010, + pmt_irq = 0x0008, + pcs_ane_irq = 0x0004, + pcs_link_irq = 0x0002, + rgmii_irq = 0x0001, +}; +#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */ + +/* PMT Control and Status */ +#define GMAC_PMT 0x0000002c +enum power_event { + pointer_reset = 0x80000000, + global_unicast = 0x00000200, + wake_up_rx_frame = 0x00000040, + magic_frame = 0x00000020, + wake_up_frame_en = 0x00000004, + magic_pkt_en = 0x00000002, + power_down = 0x00000001, +}; + +/* GMAC HW ADDR regs */ +#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8)) +#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8)) +#define GMAC_MAX_UNICAST_ADDRESSES 16 + +#define GMAC_AN_CTRL 0x000000c0 /* AN control */ +#define GMAC_AN_STATUS 0x000000c4 /* AN status */ +#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */ +#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */ +#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */ +#define GMAC_TBI 0x000000d4 /* TBI extend status */ +#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */ + +/* GMAC Configuration defines */ +#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ +#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ +#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ +#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */ +#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */ +enum inter_frame_gap { + GMAC_CONTROL_IFG_88 = 0x00040000, + GMAC_CONTROL_IFG_80 = 0x00020000, + GMAC_CONTROL_IFG_40 = 0x000e0000, +}; +#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */ +#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ +#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ +#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ +#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ +#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ +#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ +#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ +#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ +#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad Stripping */ +#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ +#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \ + GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE) + +/* GMAC Frame Filter defines */ +#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ +#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ +#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ +#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ +#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ +#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ +#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ +#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ +#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ +#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ +/* GMII ADDR defines */ +#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ +/* GMAC FLOW CTRL defines */ +#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define GMAC_FLOW_CTRL_PT_SHIFT 16 +#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ +#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ +#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ + +/*--- DMA BLOCK defines ---*/ +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +/* Programmable burst length (passed thorugh platform)*/ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 + +enum rx_tx_priority_ratio { + double_ratio = 0x00004000, /*2:1 */ + triple_ratio = 0x00008000, /*3:1 */ + quadruple_ratio = 0x0000c000, /*4:1 */ +}; + +#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ +#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */ +#define DMA_BUS_MODE_RPBL_SHIFT 17 +#define DMA_BUS_MODE_USP 0x00800000 +#define DMA_BUS_MODE_4PBL 0x01000000 +#define DMA_BUS_MODE_AAL 0x02000000 + +/* DMA CRS Control and Status Register Mapping */ +#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */ +#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */ +/* DMA Bus Mode register defines */ +#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */ +#define DMA_BUS_PR_RATIO_SHIFT 14 +#define DMA_BUS_FB 0x00010000 /* Fixed Burst */ + +/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ +#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ +#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ +/* Theshold for Activating the FC */ +enum rfa { + act_full_minus_1 = 0x00800000, + act_full_minus_2 = 0x00800200, + act_full_minus_3 = 0x00800400, + act_full_minus_4 = 0x00800600, +}; +/* Theshold for Deactivating the FC */ +enum rfd { + deac_full_minus_1 = 0x00400000, + deac_full_minus_2 = 0x00400800, + deac_full_minus_3 = 0x00401000, + deac_full_minus_4 = 0x00401800, +}; +#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ +#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */ + +enum ttc_control { + DMA_CONTROL_TTC_64 = 0x00000000, + DMA_CONTROL_TTC_128 = 0x00004000, + DMA_CONTROL_TTC_192 = 0x00008000, + DMA_CONTROL_TTC_256 = 0x0000c000, + DMA_CONTROL_TTC_40 = 0x00010000, + DMA_CONTROL_TTC_32 = 0x00014000, + DMA_CONTROL_TTC_24 = 0x00018000, + DMA_CONTROL_TTC_16 = 0x0001c000, +}; +#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff + +#define DMA_CONTROL_EFC 0x00000100 +#define DMA_CONTROL_FEF 0x00000080 +#define DMA_CONTROL_FUF 0x00000040 + +enum rtc_control { + DMA_CONTROL_RTC_64 = 0x00000000, + DMA_CONTROL_RTC_32 = 0x00000008, + DMA_CONTROL_RTC_96 = 0x00000010, + DMA_CONTROL_RTC_128 = 0x00000018, +}; +#define DMA_CONTROL_TC_RX_MASK 0xffffffe7 + +#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */ + +/* MMC registers offset */ +#define GMAC_MMC_CTRL 0x100 +#define GMAC_MMC_RX_INTR 0x104 +#define GMAC_MMC_TX_INTR 0x108 +#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c new file mode 100644 index 00000000000..625171b6062 --- /dev/null +++ b/drivers/net/stmmac/mac100.c @@ -0,0 +1,517 @@ +/******************************************************************************* + This is the driver for the MAC 10/100 on-chip Ethernet controller + currently tested on all the ST boards based on STb7109 and stx7200 SoCs. + + DWC Ether MAC 10/100 Universal version 4.0 has been used for developing + this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "common.h" +#include "mac100.h" + +#undef MAC100_DEBUG +/*#define MAC100_DEBUG*/ +#ifdef MAC100_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void mac100_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CONTROL); + + writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL); + +#ifdef STMMAC_VLAN_TAG_USED + writel(ETH_P_8021Q, ioaddr + MAC_VLAN1); +#endif + return; +} + +static void mac100_dump_mac_regs(unsigned long ioaddr) +{ + pr_info("\t----------------------------------------------\n" + "\t MAC100 CSR (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL, + readl(ioaddr + MAC_CONTROL)); + pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH, + readl(ioaddr + MAC_ADDR_HIGH)); + pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW, + readl(ioaddr + MAC_ADDR_LOW)); + pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n", + MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH)); + pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n", + MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW)); + pr_info("\tflow control (offset 0x%x): 0x%08x\n", + MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL)); + pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1, + readl(ioaddr + MAC_VLAN1)); + pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2, + readl(ioaddr + MAC_VLAN2)); + pr_info("\n\tMAC management counter registers\n"); + pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n", + MMC_CONTROL, readl(ioaddr + MMC_CONTROL)); + pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR)); + pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR)); + pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK)); + pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK)); + return; +} + +static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, + u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + /* Enable Application Access by writing to DMA CSR0 */ + writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), + ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Store and Forward capability is not used at all.. + * The transmit threshold can be programmed by + * setting the TTC bits in the DMA control register.*/ +static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else + csr6 |= DMA_CONTROL_TTC_128; + + writel(csr6, ioaddr + DMA_CONTROL); + + return; +} + +static void mac100_dump_dma_regs(unsigned long ioaddr) +{ + int i; + + DBG(KERN_DEBUG "MAC100 DMA CSR \n"); + for (i = 0; i < 9; i++) + pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + i * 4), + readl(ioaddr + DMA_BUS_MODE + i * 4)); + DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", + DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); + DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", + DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); + return; +} + +/* DMA controller has two counters to track the number of + the receive missed frames. */ +static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + struct net_device_stats *stats = (struct net_device_stats *)data; + u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); + + if (unlikely(csr8)) { + if (csr8 & DMA_MISSED_FRAME_OVE) { + stats->rx_over_errors += 0x800; + x->rx_overflow_cntr += 0x800; + } else { + unsigned int ove_cntr; + ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); + stats->rx_over_errors += ove_cntr; + x->rx_overflow_cntr += ove_cntr; + } + + if (csr8 & DMA_MISSED_FRAME_OVE_M) { + stats->rx_missed_errors += 0xffff; + x->rx_missed_cntr += 0xffff; + } else { + unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); + stats->rx_missed_errors += miss_f; + x->rx_missed_cntr += miss_f; + } + } + return; +} + +static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.tx.error_summary)) { + if (unlikely(p->des01.tx.underflow_error)) { + x->tx_underflow++; + stats->tx_fifo_errors++; + } + if (unlikely(p->des01.tx.no_carrier)) { + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.tx.loss_carrier)) { + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely((p->des01.tx.excessive_deferral) || + (p->des01.tx.excessive_collisions) || + (p->des01.tx.late_collision))) + stats->collisions += p->des01.tx.collision_count; + ret = -1; + } + if (unlikely(p->des01.tx.heartbeat_fail)) { + x->tx_heartbeat++; + stats->tx_heartbeat_errors++; + ret = -1; + } + if (unlikely(p->des01.tx.deferred)) + x->tx_deferred++; + + return ret; +} + +static int mac100_get_tx_len(struct dma_desc *p) +{ + return p->des01.tx.buffer1_size; +} + +/* This function verifies if each incoming frame has some errors + * and, if required, updates the multicast statistics. + * In case of success, it returns csum_none becasue the device + * is not able to compute the csum in HW. */ +static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = csum_none; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.rx.last_descriptor == 0)) { + pr_warning("mac100 Error: Oversized Ethernet " + "frame spanned multiple buffers\n"); + stats->rx_length_errors++; + return discard_frame; + } + + if (unlikely(p->des01.rx.error_summary)) { + if (unlikely(p->des01.rx.descriptor_error)) + x->rx_desc++; + if (unlikely(p->des01.rx.partial_frame_error)) + x->rx_partial++; + if (unlikely(p->des01.rx.run_frame)) + x->rx_runt++; + if (unlikely(p->des01.rx.frame_too_long)) + x->rx_toolong++; + if (unlikely(p->des01.rx.collision)) { + x->rx_collision++; + stats->collisions++; + } + if (unlikely(p->des01.rx.crc_error)) { + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + if (unlikely(p->des01.rx.dribbling)) + ret = discard_frame; + + if (unlikely(p->des01.rx.length_error)) { + x->rx_lenght++; + ret = discard_frame; + } + if (unlikely(p->des01.rx.mii_error)) { + x->rx_mii++; + ret = discard_frame; + } + if (p->des01.rx.multicast_frame) { + x->rx_multicast++; + stats->multicast++; + } + return ret; +} + +static void mac100_irq_status(unsigned long ioaddr) +{ + return; +} + +static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + u32 value = readl(ioaddr + MAC_CONTROL); + + if (dev->flags & IFF_PROMISC) { + value |= MAC_CONTROL_PR; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO | + MAC_CONTROL_HP); + } else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value |= MAC_CONTROL_PM; + value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO); + writel(0xffffffff, ioaddr + MAC_HASH_HIGH); + writel(0xffffffff, ioaddr + MAC_HASH_LOW); + } else if (dev->mc_count == 0) { /* no multicast */ + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF | + MAC_CONTROL_HO | MAC_CONTROL_HP); + } else { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Perfect filter mode for physical address and Hash + filter for multicast */ + value |= MAC_CONTROL_HP; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF + | MAC_CONTROL_HO); + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + * index the contens of the hash table */ + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + MAC_HASH_LOW); + writel(mc_filter[1], ioaddr + MAC_HASH_HIGH); + } + + writel(value, ioaddr + MAC_CONTROL); + + DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: " + "HI 0x%08x, LO 0x%08x\n", + __func__, readl(ioaddr + MAC_CONTROL), + readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW)); + return; +} + +static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = MAC_FLOW_CTRL_ENABLE; + + if (duplex) + flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT); + writel(flow, ioaddr + MAC_FLOW_CTRL); + + return; +} + +/* No PMT module supported in our SoC for the Ethernet Controller. */ +static void mac100_pmt(unsigned long ioaddr, unsigned long mode) +{ + return; +} + +static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.rx.own = 1; + p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1; + if (i == ring_size - 1) + p->des01.rx.end_ring = 1; + if (disable_rx_ic) + p->des01.rx.disable_ic = 1; + p++; + } + return; +} + +static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.tx.own = 0; + if (i == ring_size - 1) + p->des01.tx.end_ring = 1; + p++; + } + return; +} + +static int mac100_get_tx_owner(struct dma_desc *p) +{ + return p->des01.tx.own; +} + +static int mac100_get_rx_owner(struct dma_desc *p) +{ + return p->des01.rx.own; +} + +static void mac100_set_tx_owner(struct dma_desc *p) +{ + p->des01.tx.own = 1; +} + +static void mac100_set_rx_owner(struct dma_desc *p) +{ + p->des01.rx.own = 1; +} + +static int mac100_get_tx_ls(struct dma_desc *p) +{ + return p->des01.tx.last_segment; +} + +static void mac100_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.tx.end_ring; + + /* clean field used within the xmit */ + p->des01.tx.first_segment = 0; + p->des01.tx.last_segment = 0; + p->des01.tx.buffer1_size = 0; + + /* clean status reported */ + p->des01.tx.error_summary = 0; + p->des01.tx.underflow_error = 0; + p->des01.tx.no_carrier = 0; + p->des01.tx.loss_carrier = 0; + p->des01.tx.excessive_deferral = 0; + p->des01.tx.excessive_collisions = 0; + p->des01.tx.late_collision = 0; + p->des01.tx.heartbeat_fail = 0; + p->des01.tx.deferred = 0; + + /* set termination field */ + p->des01.tx.end_ring = ter; + + return; +} + +static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.tx.first_segment = is_fs; + p->des01.tx.buffer1_size = len; +} + +static void mac100_clear_tx_ic(struct dma_desc *p) +{ + p->des01.tx.interrupt = 0; +} + +static void mac100_close_tx_desc(struct dma_desc *p) +{ + p->des01.tx.last_segment = 1; + p->des01.tx.interrupt = 1; +} + +static int mac100_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.rx.frame_length; +} + +struct stmmac_ops mac100_driver = { + .core_init = mac100_core_init, + .dump_mac_regs = mac100_dump_mac_regs, + .dma_init = mac100_dma_init, + .dump_dma_regs = mac100_dump_dma_regs, + .dma_mode = mac100_dma_operation_mode, + .dma_diagnostic_fr = mac100_dma_diagnostic_fr, + .tx_status = mac100_get_tx_frame_status, + .rx_status = mac100_get_rx_frame_status, + .get_tx_len = mac100_get_tx_len, + .set_filter = mac100_set_filter, + .flow_ctrl = mac100_flow_ctrl, + .pmt = mac100_pmt, + .init_rx_desc = mac100_init_rx_desc, + .init_tx_desc = mac100_init_tx_desc, + .get_tx_owner = mac100_get_tx_owner, + .get_rx_owner = mac100_get_rx_owner, + .release_tx_desc = mac100_release_tx_desc, + .prepare_tx_desc = mac100_prepare_tx_desc, + .clear_tx_ic = mac100_clear_tx_ic, + .close_tx_desc = mac100_close_tx_desc, + .get_tx_ls = mac100_get_tx_ls, + .set_tx_owner = mac100_set_tx_owner, + .set_rx_owner = mac100_set_rx_owner, + .get_rx_frame_len = mac100_get_rx_frame_len, + .host_irq_status = mac100_irq_status, + .set_umac_addr = mac100_set_umac_addr, + .get_umac_addr = mac100_get_umac_addr, +}; + +struct mac_device_info *mac100_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + pr_info("\tMAC 10/100\n"); + + mac->ops = &mac100_driver; + mac->hw.pmt = PMT_NOT_SUPPORTED; + mac->hw.link.port = MAC_CONTROL_PS; + mac->hw.link.duplex = MAC_CONTROL_F; + mac->hw.link.speed = 0; + mac->hw.mii.addr = MAC_MII_ADDR; + mac->hw.mii.data = MAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h new file mode 100644 index 00000000000..0f8f110d004 --- /dev/null +++ b/drivers/net/stmmac/mac100.h @@ -0,0 +1,116 @@ +/******************************************************************************* + MAC 10/100 Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +/*---------------------------------------------------------------------------- + * MAC BLOCK defines + *---------------------------------------------------------------------------*/ +/* MAC CSR offset */ +#define MAC_CONTROL 0x00000000 /* MAC Control */ +#define MAC_ADDR_HIGH 0x00000004 /* MAC Address High */ +#define MAC_ADDR_LOW 0x00000008 /* MAC Address Low */ +#define MAC_HASH_HIGH 0x0000000c /* Multicast Hash Table High */ +#define MAC_HASH_LOW 0x00000010 /* Multicast Hash Table Low */ +#define MAC_MII_ADDR 0x00000014 /* MII Address */ +#define MAC_MII_DATA 0x00000018 /* MII Data */ +#define MAC_FLOW_CTRL 0x0000001c /* Flow Control */ +#define MAC_VLAN1 0x00000020 /* VLAN1 Tag */ +#define MAC_VLAN2 0x00000024 /* VLAN2 Tag */ + +/* MAC CTRL defines */ +#define MAC_CONTROL_RA 0x80000000 /* Receive All Mode */ +#define MAC_CONTROL_BLE 0x40000000 /* Endian Mode */ +#define MAC_CONTROL_HBD 0x10000000 /* Heartbeat Disable */ +#define MAC_CONTROL_PS 0x08000000 /* Port Select */ +#define MAC_CONTROL_DRO 0x00800000 /* Disable Receive Own */ +#define MAC_CONTROL_EXT_LOOPBACK 0x00400000 /* Reserved (ext loopback?) */ +#define MAC_CONTROL_OM 0x00200000 /* Loopback Operating Mode */ +#define MAC_CONTROL_F 0x00100000 /* Full Duplex Mode */ +#define MAC_CONTROL_PM 0x00080000 /* Pass All Multicast */ +#define MAC_CONTROL_PR 0x00040000 /* Promiscuous Mode */ +#define MAC_CONTROL_IF 0x00020000 /* Inverse Filtering */ +#define MAC_CONTROL_PB 0x00010000 /* Pass Bad Frames */ +#define MAC_CONTROL_HO 0x00008000 /* Hash Only Filtering Mode */ +#define MAC_CONTROL_HP 0x00002000 /* Hash/Perfect Filtering Mode */ +#define MAC_CONTROL_LCC 0x00001000 /* Late Collision Control */ +#define MAC_CONTROL_DBF 0x00000800 /* Disable Broadcast Frames */ +#define MAC_CONTROL_DRTY 0x00000400 /* Disable Retry */ +#define MAC_CONTROL_ASTP 0x00000100 /* Automatic Pad Stripping */ +#define MAC_CONTROL_BOLMT_10 0x00000000 /* Back Off Limit 10 */ +#define MAC_CONTROL_BOLMT_8 0x00000040 /* Back Off Limit 8 */ +#define MAC_CONTROL_BOLMT_4 0x00000080 /* Back Off Limit 4 */ +#define MAC_CONTROL_BOLMT_1 0x000000c0 /* Back Off Limit 1 */ +#define MAC_CONTROL_DC 0x00000020 /* Deferral Check */ +#define MAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define MAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP) + +/* MAC FLOW CTRL defines */ +#define MAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define MAC_FLOW_CTRL_PT_SHIFT 16 +#define MAC_FLOW_CTRL_PASS 0x00000004 /* Pass Control Frames */ +#define MAC_FLOW_CTRL_ENABLE 0x00000002 /* Flow Control Enable */ +#define MAC_FLOW_CTRL_PAUSE 0x00000001 /* Flow Control Busy ... */ + +/* MII ADDR defines */ +#define MAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define MAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ + +/*---------------------------------------------------------------------------- + * DMA BLOCK defines + *---------------------------------------------------------------------------*/ + +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_DBO 0x00100000 /* Descriptor Byte Ordering */ +#define DMA_BUS_MODE_BLE 0x00000080 /* Big Endian/Little Endian */ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +#define DMA_BUS_MODE_BAR_BUS 0x00000002 /* Bar-Bus Arbitration */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DEFAULT 0x00000000 + +/* DMA Control register defines */ +#define DMA_CONTROL_SF 0x00200000 /* Store And Forward */ + +/* Transmit Threshold Control */ +enum ttc_control { + DMA_CONTROL_TTC_DEFAULT = 0x00000000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_64 = 0x00004000, /* Threshold is 64 DWORDS */ + DMA_CONTROL_TTC_128 = 0x00008000, /* Threshold is 128 DWORDS */ + DMA_CONTROL_TTC_256 = 0x0000c000, /* Threshold is 256 DWORDS */ + DMA_CONTROL_TTC_18 = 0x00400000, /* Threshold is 18 DWORDS */ + DMA_CONTROL_TTC_24 = 0x00404000, /* Threshold is 24 DWORDS */ + DMA_CONTROL_TTC_32 = 0x00408000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_40 = 0x0040c000, /* Threshold is 40 DWORDS */ + DMA_CONTROL_SE = 0x00000008, /* Stop On Empty */ + DMA_CONTROL_OSF = 0x00000004, /* Operate On 2nd Frame */ +}; + +/* STMAC110 DMA Missed Frame Counter register defines */ +#define DMA_MISSED_FRAME_OVE 0x10000000 /* FIFO Overflow Overflow */ +#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000 /* Overflow Frame Counter */ +#define DMA_MISSED_FRAME_OVE_M 0x00010000 /* Missed Frame Overflow */ +#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h new file mode 100644 index 00000000000..6d2eae3040e --- /dev/null +++ b/drivers/net/stmmac/stmmac.h @@ -0,0 +1,98 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#define DRV_MODULE_VERSION "Oct_09" + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define STMMAC_VLAN_TAG_USED +#include <linux/if_vlan.h> +#endif + +#include "common.h" +#ifdef CONFIG_STMMAC_TIMER +#include "stmmac_timer.h" +#endif + +struct stmmac_priv { + /* Frequently used values are kept adjacent for cache effect */ + struct dma_desc *dma_tx ____cacheline_aligned; + dma_addr_t dma_tx_phy; + struct sk_buff **tx_skbuff; + unsigned int cur_tx; + unsigned int dirty_tx; + unsigned int dma_tx_size; + int tx_coe; + int tx_coalesce; + + struct dma_desc *dma_rx ; + unsigned int cur_rx; + unsigned int dirty_rx; + struct sk_buff **rx_skbuff; + dma_addr_t *rx_skbuff_dma; + struct sk_buff_head rx_recycle; + + struct net_device *dev; + int is_gmac; + dma_addr_t dma_rx_phy; + unsigned int dma_rx_size; + int rx_csum; + unsigned int dma_buf_sz; + struct device *device; + struct mac_device_info *mac_type; + + struct stmmac_extra_stats xstats; + struct napi_struct napi; + + phy_interface_t phy_interface; + int pbl; + int bus_id; + int phy_addr; + int phy_mask; + int (*phy_reset) (void *priv); + void (*fix_mac_speed) (void *priv, unsigned int speed); + void *bsp_priv; + + int phy_irq; + struct phy_device *phydev; + int oldlink; + int speed; + int oldduplex; + unsigned int flow_ctrl; + unsigned int pause; + struct mii_bus *mii; + + u32 msg_enable; + spinlock_t lock; + int wolopts; + int wolenabled; + int shutdown; +#ifdef CONFIG_STMMAC_TIMER + struct stmmac_timer *tm; +#endif +#ifdef STMMAC_VLAN_TAG_USED + struct vlan_group *vlgrp; +#endif +}; + +extern int stmmac_mdio_unregister(struct net_device *ndev); +extern int stmmac_mdio_register(struct net_device *ndev); +extern void stmmac_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c new file mode 100644 index 00000000000..694ebe6a075 --- /dev/null +++ b/drivers/net/stmmac/stmmac_ethtool.c @@ -0,0 +1,395 @@ +/******************************************************************************* + STMMAC Ethtool support + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define REG_SPACE_SIZE 0x1054 +#define MAC100_ETHTOOL_NAME "st_mac100" +#define GMAC_ETHTOOL_NAME "st_gmac" + +struct stmmac_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define STMMAC_STAT(m) \ + { #m, FIELD_SIZEOF(struct stmmac_extra_stats, m), \ + offsetof(struct stmmac_priv, xstats.m)} + +static const struct stmmac_stats stmmac_gstrings_stats[] = { + STMMAC_STAT(tx_underflow), + STMMAC_STAT(tx_carrier), + STMMAC_STAT(tx_losscarrier), + STMMAC_STAT(tx_heartbeat), + STMMAC_STAT(tx_deferred), + STMMAC_STAT(tx_vlan), + STMMAC_STAT(rx_vlan), + STMMAC_STAT(tx_jabber), + STMMAC_STAT(tx_frame_flushed), + STMMAC_STAT(tx_payload_error), + STMMAC_STAT(tx_ip_header_error), + STMMAC_STAT(rx_desc), + STMMAC_STAT(rx_partial), + STMMAC_STAT(rx_runt), + STMMAC_STAT(rx_toolong), + STMMAC_STAT(rx_collision), + STMMAC_STAT(rx_crc), + STMMAC_STAT(rx_lenght), + STMMAC_STAT(rx_mii), + STMMAC_STAT(rx_multicast), + STMMAC_STAT(rx_gmac_overflow), + STMMAC_STAT(rx_watchdog), + STMMAC_STAT(da_rx_filter_fail), + STMMAC_STAT(sa_rx_filter_fail), + STMMAC_STAT(rx_missed_cntr), + STMMAC_STAT(rx_overflow_cntr), + STMMAC_STAT(tx_undeflow_irq), + STMMAC_STAT(tx_process_stopped_irq), + STMMAC_STAT(tx_jabber_irq), + STMMAC_STAT(rx_overflow_irq), + STMMAC_STAT(rx_buf_unav_irq), + STMMAC_STAT(rx_process_stopped_irq), + STMMAC_STAT(rx_watchdog_irq), + STMMAC_STAT(tx_early_irq), + STMMAC_STAT(fatal_bus_error_irq), + STMMAC_STAT(threshold), + STMMAC_STAT(tx_pkt_n), + STMMAC_STAT(rx_pkt_n), + STMMAC_STAT(poll_n), + STMMAC_STAT(sched_timer_n), + STMMAC_STAT(normal_irq_n), +}; +#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats) + +void stmmac_ethtool_getdrvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + if (!priv->is_gmac) + strcpy(info->driver, MAC100_ETHTOOL_NAME); + else + strcpy(info->driver, GMAC_ETHTOOL_NAME); + + strcpy(info->version, DRV_MODULE_VERSION); + info->fw_version[0] = '\0'; + info->n_stats = STMMAC_STATS_LEN; + return; +} + +int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + if (phy == NULL) { + pr_err("%s: %s: PHY is not registered\n", + __func__, dev->name); + return -ENODEV; + } + if (!netif_running(dev)) { + pr_err("%s: interface is disabled: we cannot track " + "link speed / duplex setting\n", dev->name); + return -EBUSY; + } + cmd->transceiver = XCVR_INTERNAL; + spin_lock_irq(&priv->lock); + rc = phy_ethtool_gset(phy, cmd); + spin_unlock_irq(&priv->lock); + return rc; +} + +int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + + spin_lock(&priv->lock); + rc = phy_ethtool_sset(phy, cmd); + spin_unlock(&priv->lock); + + return rc; +} + +u32 stmmac_ethtool_getmsglevel(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + return priv->msg_enable; +} + +void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct stmmac_priv *priv = netdev_priv(dev); + priv->msg_enable = level; + +} + +int stmmac_check_if_running(struct net_device *dev) +{ + if (!netif_running(dev)) + return -EBUSY; + return 0; +} + +int stmmac_ethtool_get_regs_len(struct net_device *dev) +{ + return REG_SPACE_SIZE; +} + +void stmmac_ethtool_gregs(struct net_device *dev, + struct ethtool_regs *regs, void *space) +{ + int i; + u32 *reg_space = (u32 *) space; + + struct stmmac_priv *priv = netdev_priv(dev); + + memset(reg_space, 0x0, REG_SPACE_SIZE); + + if (!priv->is_gmac) { + /* MAC registers */ + for (i = 0; i < 12; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 9; i++) + reg_space[i + 12] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR); + reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR); + } else { + /* MAC registers */ + for (i = 0; i < 55; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 22; i++) + reg_space[i + 55] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + } + + return; +} + +int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +u32 stmmac_ethtool_get_rx_csum(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + return priv->rx_csum; +} + +static void +stmmac_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + + spin_lock(&priv->lock); + + pause->rx_pause = 0; + pause->tx_pause = 0; + pause->autoneg = priv->phydev->autoneg; + + if (priv->flow_ctrl & FLOW_RX) + pause->rx_pause = 1; + if (priv->flow_ctrl & FLOW_TX) + pause->tx_pause = 1; + + spin_unlock(&priv->lock); + return; +} + +static int +stmmac_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + struct phy_device *phy = priv->phydev; + int new_pause = FLOW_OFF; + int ret = 0; + + spin_lock(&priv->lock); + + if (pause->rx_pause) + new_pause |= FLOW_RX; + if (pause->tx_pause) + new_pause |= FLOW_TX; + + priv->flow_ctrl = new_pause; + + if (phy->autoneg) { + if (netif_running(netdev)) { + struct ethtool_cmd cmd; + /* auto-negotiation automatically restarted */ + cmd.cmd = ETHTOOL_NWAY_RST; + cmd.supported = phy->supported; + cmd.advertising = phy->advertising; + cmd.autoneg = phy->autoneg; + cmd.speed = phy->speed; + cmd.duplex = phy->duplex; + cmd.phy_address = phy->addr; + ret = phy_ethtool_sset(phy, &cmd); + } + } else { + unsigned long ioaddr = netdev->base_addr; + priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex, + priv->flow_ctrl, priv->pause); + } + spin_unlock(&priv->lock); + return ret; +} + +static void stmmac_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *dummy, u64 *data) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int i; + + /* Update HW stats if supported */ + priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats, + ioaddr); + + for (i = 0; i < STMMAC_STATS_LEN; i++) { + char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset; + data[i] = (stmmac_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p); + } + + return; +} + +static int stmmac_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return STMMAC_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + u8 *p = data; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < STMMAC_STATS_LEN; i++) { + memcpy(p, stmmac_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + default: + WARN_ON(1); + break; + } + return; +} + +/* Currently only support WOL through Magic packet. */ +static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock_irq(&priv->lock); + if (priv->wolenabled == PMT_SUPPORTED) { + wol->supported = WAKE_MAGIC; + wol->wolopts = priv->wolopts; + } + spin_unlock_irq(&priv->lock); +} + +static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + u32 support = WAKE_MAGIC; + + if (priv->wolenabled == PMT_NOT_SUPPORTED) + return -EINVAL; + + if (wol->wolopts & ~support) + return -EINVAL; + + if (wol->wolopts == 0) + device_set_wakeup_enable(priv->device, 0); + else + device_set_wakeup_enable(priv->device, 1); + + spin_lock_irq(&priv->lock); + priv->wolopts = wol->wolopts; + spin_unlock_irq(&priv->lock); + + return 0; +} + +static struct ethtool_ops stmmac_ethtool_ops = { + .begin = stmmac_check_if_running, + .get_drvinfo = stmmac_ethtool_getdrvinfo, + .get_settings = stmmac_ethtool_getsettings, + .set_settings = stmmac_ethtool_setsettings, + .get_msglevel = stmmac_ethtool_getmsglevel, + .set_msglevel = stmmac_ethtool_setmsglevel, + .get_regs = stmmac_ethtool_gregs, + .get_regs_len = stmmac_ethtool_get_regs_len, + .get_link = ethtool_op_get_link, + .get_rx_csum = stmmac_ethtool_get_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = stmmac_ethtool_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_pauseparam = stmmac_get_pauseparam, + .set_pauseparam = stmmac_set_pauseparam, + .get_ethtool_stats = stmmac_get_ethtool_stats, + .get_strings = stmmac_get_strings, + .get_wol = stmmac_get_wol, + .set_wol = stmmac_set_wol, + .get_sset_count = stmmac_get_sset_count, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif +}; + +void stmmac_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops); +} diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c new file mode 100644 index 00000000000..9542995ba66 --- /dev/null +++ b/drivers/net/stmmac/stmmac_main.c @@ -0,0 +1,2210 @@ +/******************************************************************************* + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers. + ST Ethernet IPs are built around a Synopsys IP Core. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + + Documentation available at: + http://www.stlinux.com + Support available at: + https://bugzilla.stlinux.com/ +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/if_ether.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/if_vlan.h> +#include <linux/dma-mapping.h> +#include <linux/stm/soc.h> +#include "stmmac.h" + +#define STMMAC_RESOURCE_NAME "stmmaceth" +#define PHY_RESOURCE_NAME "stmmacphy" + +#undef STMMAC_DEBUG +/*#define STMMAC_DEBUG*/ +#ifdef STMMAC_DEBUG +#define DBG(nlevel, klevel, fmt, args...) \ + ((void)(netif_msg_##nlevel(priv) && \ + printk(KERN_##klevel fmt, ## args))) +#else +#define DBG(nlevel, klevel, fmt, args...) do { } while (0) +#endif + +#undef STMMAC_RX_DEBUG +/*#define STMMAC_RX_DEBUG*/ +#ifdef STMMAC_RX_DEBUG +#define RX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define RX_DBG(fmt, args...) do { } while (0) +#endif + +#undef STMMAC_XMIT_DEBUG +/*#define STMMAC_XMIT_DEBUG*/ +#ifdef STMMAC_TX_DEBUG +#define TX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define TX_DBG(fmt, args...) do { } while (0) +#endif + +#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 /* default 5 seconds */ +static int watchdog = TX_TIMEO; +module_param(watchdog, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); + +static int debug = -1; /* -1: default, 0: no output, 16: all */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); + +static int phyaddr = -1; +module_param(phyaddr, int, S_IRUGO); +MODULE_PARM_DESC(phyaddr, "Physical device address"); + +#define DMA_TX_SIZE 256 +static int dma_txsize = DMA_TX_SIZE; +module_param(dma_txsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list"); + +#define DMA_RX_SIZE 256 +static int dma_rxsize = DMA_RX_SIZE; +module_param(dma_rxsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list"); + +static int flow_ctrl = FLOW_OFF; +module_param(flow_ctrl, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]"); + +static int pause = PAUSE_TIME; +module_param(pause, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pause, "Flow Control Pause Time"); + +#define TC_DEFAULT 64 +static int tc = TC_DEFAULT; +module_param(tc, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tc, "DMA threshold control value"); + +#define RX_NO_COALESCE 1 /* Always interrupt on completion */ +#define TX_NO_COALESCE -1 /* No moderation by default */ + +/* Pay attention to tune this parameter; take care of both + * hardware capability and network stabitily/performance impact. + * Many tests showed that ~4ms latency seems to be good enough. */ +#ifdef CONFIG_STMMAC_TIMER +#define DEFAULT_PERIODIC_RATE 256 +static int tmrate = DEFAULT_PERIODIC_RATE; +module_param(tmrate, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); +#endif + +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +static int buf_sz = DMA_BUFFER_SIZE; +module_param(buf_sz, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(buf_sz, "DMA buffer size"); + +/* In case of Giga ETH, we can enable/disable the COE for the + * transmit HW checksum computation. + * Note that, if tx csum is off in HW, SG will be still supported. */ +static int tx_coe = HW_CSUM; +module_param(tx_coe, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]"); + +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id); +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev); + +/** + * stmmac_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void stmmac_verify_args(void) +{ + if (unlikely(watchdog < 0)) + watchdog = TX_TIMEO; + if (unlikely(dma_rxsize < 0)) + dma_rxsize = DMA_RX_SIZE; + if (unlikely(dma_txsize < 0)) + dma_txsize = DMA_TX_SIZE; + if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB))) + buf_sz = DMA_BUFFER_SIZE; + if (unlikely(flow_ctrl > 1)) + flow_ctrl = FLOW_AUTO; + else if (likely(flow_ctrl < 0)) + flow_ctrl = FLOW_OFF; + if (unlikely((pause < 0) || (pause > 0xffff))) + pause = PAUSE_TIME; + + return; +} + +#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) +static void print_pkt(unsigned char *buf, int len) +{ + int j; + pr_info("len = %d byte, buf addr: 0x%p", len, buf); + for (j = 0; j < len; j++) { + if ((j % 16) == 0) + pr_info("\n %03x:", j); + pr_info(" %02x", buf[j]); + } + pr_info("\n"); + return; +} +#endif + +/* minimum number of free TX descriptors required to wake up TX process */ +#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) +{ + return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; +} + +/** + * stmmac_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void stmmac_adjust_link(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + int new_state = 0; + unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; + + if (phydev == NULL) + return; + + DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n", + phydev->addr, phydev->link); + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 ctrl = readl(ioaddr + MAC_CTRL_REG); + + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) + ctrl &= ~priv->mac_type->hw.link.duplex; + else + ctrl |= priv->mac_type->hw.link.duplex; + priv->oldduplex = phydev->duplex; + } + /* Flow Control operation */ + if (phydev->pause) + priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex, + fc, pause_time); + + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case 1000: + if (likely(priv->is_gmac)) + ctrl &= ~priv->mac_type->hw.link.port; + break; + case 100: + case 10: + if (priv->is_gmac) { + ctrl |= priv->mac_type->hw.link.port; + if (phydev->speed == SPEED_100) { + ctrl |= + priv->mac_type->hw.link. + speed; + } else { + ctrl &= + ~(priv->mac_type->hw. + link.speed); + } + } else { + ctrl &= ~priv->mac_type->hw.link.port; + } + priv->fix_mac_speed(priv->bsp_priv, + phydev->speed); + break; + default: + if (netif_msg_link(priv)) + pr_warning("%s: Speed (%d) is not 10" + " or 100!\n", dev->name, phydev->speed); + break; + } + + priv->speed = phydev->speed; + } + + writel(ctrl, ioaddr + MAC_CTRL_REG); + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + } + + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); + + DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); +} + +/** + * stmmac_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int stmmac_init_phy(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev; + char phy_id[BUS_ID_SIZE]; /* PHY to connect */ + char bus_id[BUS_ID_SIZE]; + + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + + if (priv->phy_addr == -1) { + /* We don't have a PHY, so do nothing */ + return 0; + } + + snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr); + pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); + + phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, + priv->phy_interface); + + if (IS_ERR(phydev)) { + pr_err("%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* + * Broken HW is sometimes missing the pull-up resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + * Note: phydev->phy_id is the result of reading the UID PHY registers. + */ + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" + " Link = %d\n", dev->name, phydev->phy_id, phydev->link); + + priv->phydev = phydev; + + return 0; +} + +static inline void stmmac_mac_enable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_RNABLE_RX; + /* Set the RE (receive enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_enable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_ENABLE_TX; + /* Set the TE (transmit enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_RNABLE_RX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_ENABLE_TX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +/** + * display_ring + * @p: pointer to the ring. + * @size: size of the ring. + * Description: display all the descriptors within the ring. + */ +static void display_ring(struct dma_desc *p, int size) +{ + struct tmp_s { + u64 a; + unsigned int b; + unsigned int c; + }; + int i; + for (i = 0; i < size; i++) { + struct tmp_s *x = (struct tmp_s *)(p + i); + pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", + i, (unsigned int)virt_to_phys(&p[i]), + (unsigned int)(x->a), (unsigned int)((x->a) >> 32), + x->b, x->c); + pr_info("\n"); + } +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. + */ +static void init_dma_desc_rings(struct net_device *dev) +{ + int i; + struct stmmac_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + unsigned int bfsize = priv->dma_buf_sz; + int buff2_needed = 0, dis_ic = 0; + + /* Set the Buffer size according to the MTU; + * indeed, in case of jumbo we need to bump-up the buffer sizes. + */ + if (unlikely(dev->mtu >= BUF_SIZE_8KiB)) + bfsize = BUF_SIZE_16KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_4KiB)) + bfsize = BUF_SIZE_8KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_2KiB)) + bfsize = BUF_SIZE_4KiB; + else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE)) + bfsize = BUF_SIZE_2KiB; + else + bfsize = DMA_BUFFER_SIZE; + +#ifdef CONFIG_STMMAC_TIMER + /* Disable interrupts on completion for the reception if timer is on */ + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif + /* If the MTU exceeds 8k so use the second buffer in the chain */ + if (bfsize >= BUF_SIZE_8KiB) + buff2_needed = 1; + + DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", + txsize, rxsize, bfsize); + + priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); + priv->rx_skbuff = + kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); + priv->dma_rx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + rxsize * + sizeof(struct dma_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, + GFP_KERNEL); + priv->dma_tx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + txsize * + sizeof(struct dma_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + + if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) { + pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__); + return; + } + + DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, " + "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n", + dev->name, priv->dma_rx, priv->dma_tx, + (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy); + + /* RX INITIALIZATION */ + DBG(probe, INFO, "stmmac: SKB addresses:\n" + "skb\t\tskb data\tdma data\n"); + + for (i = 0; i < rxsize; i++) { + struct dma_desc *p = priv->dma_rx + i; + + skb = netdev_alloc_skb_ip_align(dev, bfsize); + if (unlikely(skb == NULL)) { + pr_err("%s: Rx init fails; skb is NULL\n", __func__); + break; + } + priv->rx_skbuff[i] = skb; + priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + bfsize, DMA_FROM_DEVICE); + + p->des2 = priv->rx_skbuff_dma[i]; + if (unlikely(buff2_needed)) + p->des3 = p->des2 + BUF_SIZE_8KiB; + DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], + priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]); + } + priv->cur_rx = 0; + priv->dirty_rx = (unsigned int)(i - rxsize); + priv->dma_buf_sz = bfsize; + buf_sz = bfsize; + + /* TX INITIALIZATION */ + for (i = 0; i < txsize; i++) { + priv->tx_skbuff[i] = NULL; + priv->dma_tx[i].des2 = 0; + } + priv->dirty_tx = 0; + priv->cur_tx = 0; + + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize); + + if (netif_msg_hw(priv)) { + pr_info("RX descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + pr_info("TX descriptor ring:\n"); + display_ring(priv->dma_tx, txsize); + } + return; +} + +static void dma_free_rx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_rx_size; i++) { + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; + } + return; +} + +static void dma_free_tx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_tx_size; i++) { + if (priv->tx_skbuff[i] != NULL) { + struct dma_desc *p = priv->dma_tx + i; + if (p->des2) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + dev_kfree_skb_any(priv->tx_skbuff[i]); + priv->tx_skbuff[i] = NULL; + } + } + return; +} + +static void free_dma_desc_resources(struct stmmac_priv *priv) +{ + /* Release the DMA TX/RX socket buffers */ + dma_free_rx_skbufs(priv); + dma_free_tx_skbufs(priv); + + /* Free the region of consistent memory previously allocated for + * the DMA */ + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + kfree(priv->rx_skbuff_dma); + kfree(priv->rx_skbuff); + kfree(priv->tx_skbuff); + + return; +} + +/** + * stmmac_dma_start_tx + * @ioaddr: device I/O address + * Description: this function starts the DMA tx process. + */ +static void stmmac_dma_start_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +static void stmmac_dma_stop_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +/** + * stmmac_dma_start_rx + * @ioaddr: device I/O address + * Description: this function starts the DMA rx process. + */ +static void stmmac_dma_start_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +static void stmmac_dma_stop_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +/** + * stmmac_dma_operation_mode - HW DMA operation mode + * @priv : pointer to the private device structure. + * Description: it sets the DMA operation mode: tx/rx DMA thresholds + * or Store-And-Forward capability. It also verifies the COE for the + * transmission in case of Giga ETH. + */ +static void stmmac_dma_operation_mode(struct stmmac_priv *priv) +{ + if (!priv->is_gmac) { + /* MAC 10/100 */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0); + priv->tx_coe = NO_HW_CSUM; + } else { + if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) { + priv->mac_type->ops->dma_mode(priv->dev->base_addr, + SF_DMA_MODE, SF_DMA_MODE); + tc = SF_DMA_MODE; + priv->tx_coe = HW_CSUM; + } else { + /* Checksum computation is performed in software. */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, + SF_DMA_MODE); + priv->tx_coe = NO_HW_CSUM; + } + } + tx_coe = priv->tx_coe; + + return; +} + +#ifdef STMMAC_DEBUG +/** + * show_tx_process_state + * @status: tx descriptor status field + * Description: it shows the Transmit Process State for CSR5[22:20] + */ +static void show_tx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; + + switch (state) { + case 0: + pr_info("- TX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- TX (Running):Fetching the Tx desc\n"); + break; + case 2: + pr_info("- TX (Running): Waiting for end of tx\n"); + break; + case 3: + pr_info("- TX (Running): Reading the data " + "and queuing the data into the Tx buf\n"); + break; + case 6: + pr_info("- TX (Suspended): Tx Buff Underflow " + "or an unavailable Transmit descriptor\n"); + break; + case 7: + pr_info("- TX (Running): Closing Tx descriptor\n"); + break; + default: + break; + } + return; +} + +/** + * show_rx_process_state + * @status: rx descriptor status field + * Description: it shows the Receive Process State for CSR5[19:17] + */ +static void show_rx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; + + switch (state) { + case 0: + pr_info("- RX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- RX (Running): Fetching the Rx desc\n"); + break; + case 2: + pr_info("- RX (Running):Checking for end of pkt\n"); + break; + case 3: + pr_info("- RX (Running): Waiting for Rx pkt\n"); + break; + case 4: + pr_info("- RX (Suspended): Unavailable Rx buf\n"); + break; + case 5: + pr_info("- RX (Running): Closing Rx descriptor\n"); + break; + case 6: + pr_info("- RX(Running): Flushing the current frame" + " from the Rx buf\n"); + break; + case 7: + pr_info("- RX (Running): Queuing the Rx frame" + " from the Rx buf into memory\n"); + break; + default: + break; + } + return; +} +#endif + +/** + * stmmac_tx: + * @priv: private driver structure + * Description: it reclaims resources after transmission completes. + */ +static void stmmac_tx(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned long ioaddr = priv->dev->base_addr; + + while (priv->dirty_tx != priv->cur_tx) { + int last; + unsigned int entry = priv->dirty_tx % txsize; + struct sk_buff *skb = priv->tx_skbuff[entry]; + struct dma_desc *p = priv->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->mac_type->ops->get_tx_owner(p)) + break; + + /* Verify tx error by looking at the last segment */ + last = priv->mac_type->ops->get_tx_ls(p); + if (likely(last)) { + int tx_error = + priv->mac_type->ops->tx_status(&priv->dev->stats, + &priv->xstats, + p, ioaddr); + if (likely(tx_error == 0)) { + priv->dev->stats.tx_packets++; + priv->xstats.tx_pkt_n++; + } else + priv->dev->stats.tx_errors++; + } + TX_DBG("%s: curr %d, dirty %d\n", __func__, + priv->cur_tx, priv->dirty_tx); + + if (likely(p->des2)) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + if (unlikely(p->des3)) + p->des3 = 0; + + if (likely(skb != NULL)) { + /* + * If there's room in the queue (limit it to size) + * we add this skb back into the pool, + * if it's the right size. + */ + if ((skb_queue_len(&priv->rx_recycle) < + priv->dma_rx_size) && + skb_recycle_check(skb, priv->dma_buf_sz)) + __skb_queue_head(&priv->rx_recycle, skb); + else + dev_kfree_skb(skb); + + priv->tx_skbuff[entry] = NULL; + } + + priv->mac_type->ops->release_tx_desc(p); + + entry = (++priv->dirty_tx) % txsize; + } + if (unlikely(netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { + TX_DBG("%s: restart transmit\n", __func__); + netif_wake_queue(priv->dev); + } + netif_tx_unlock(priv->dev); + } + return; +} + +static inline void stmmac_enable_irq(struct stmmac_priv *priv) +{ +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_start(tmrate); + else +#endif + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); +} + +static inline void stmmac_disable_irq(struct stmmac_priv *priv) +{ +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_stop(); + else +#endif + writel(0, priv->dev->base_addr + DMA_INTR_ENA); +} + +static int stmmac_has_work(struct stmmac_priv *priv) +{ + unsigned int has_work = 0; + int rxret, tx_work = 0; + + rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx + + (priv->cur_rx % priv->dma_rx_size)); + + if (priv->dirty_tx != priv->cur_tx) + tx_work = 1; + + if (likely(!rxret || tx_work)) + has_work = 1; + + return has_work; +} + +static inline void _stmmac_schedule(struct stmmac_priv *priv) +{ + if (likely(stmmac_has_work(priv))) { + stmmac_disable_irq(priv); + napi_schedule(&priv->napi); + } +} + +#ifdef CONFIG_STMMAC_TIMER +void stmmac_schedule(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + priv->xstats.sched_timer_n++; + + _stmmac_schedule(priv); + + return; +} + +static void stmmac_no_timer_started(unsigned int x) +{; +}; + +static void stmmac_no_timer_stopped(void) +{; +}; +#endif + +/** + * stmmac_tx_err: + * @priv: pointer to the private device structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void stmmac_tx_err(struct stmmac_priv *priv) +{ + netif_stop_queue(priv->dev); + + stmmac_dma_stop_tx(priv->dev->base_addr); + dma_free_tx_skbufs(priv); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + priv->dirty_tx = 0; + priv->cur_tx = 0; + stmmac_dma_start_tx(priv->dev->base_addr); + + priv->dev->stats.tx_errors++; + netif_wake_queue(priv->dev); + + return; +} + +/** + * stmmac_dma_interrupt - Interrupt handler for the driver + * @dev: net device structure + * Description: Interrupt handler for the driver (DMA). + */ +static void stmmac_dma_interrupt(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct stmmac_priv *priv = netdev_priv(dev); + /* read the status register (CSR5) */ + u32 intr_status = readl(ioaddr + DMA_STATUS); + + DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status); + +#ifdef STMMAC_DEBUG + /* It displays the DMA transmit process state (CSR5 register) */ + if (netif_msg_tx_done(priv)) + show_tx_process_state(intr_status); + if (netif_msg_rx_status(priv)) + show_rx_process_state(intr_status); +#endif + /* ABNORMAL interrupts */ + if (unlikely(intr_status & DMA_STATUS_AIS)) { + DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: "); + if (unlikely(intr_status & DMA_STATUS_UNF)) { + DBG(intr, INFO, "transmit underflow\n"); + if (unlikely(tc != SF_DMA_MODE) + && (tc <= 256)) { + /* Try to bump up the threshold */ + tc += 64; + priv->mac_type->ops->dma_mode(ioaddr, tc, + SF_DMA_MODE); + priv->xstats.threshold = tc; + } + stmmac_tx_err(priv); + priv->xstats.tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) { + DBG(intr, INFO, "transmit jabber\n"); + priv->xstats.tx_jabber_irq++; + } + if (unlikely(intr_status & DMA_STATUS_OVF)) { + DBG(intr, INFO, "recv overflow\n"); + priv->xstats.rx_overflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RU)) { + DBG(intr, INFO, "receive buffer unavailable\n"); + priv->xstats.rx_buf_unav_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RPS)) { + DBG(intr, INFO, "receive process stopped\n"); + priv->xstats.rx_process_stopped_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RWT)) { + DBG(intr, INFO, "receive watchdog\n"); + priv->xstats.rx_watchdog_irq++; + } + if (unlikely(intr_status & DMA_STATUS_ETI)) { + DBG(intr, INFO, "transmit early interrupt\n"); + priv->xstats.tx_early_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TPS)) { + DBG(intr, INFO, "transmit process stopped\n"); + priv->xstats.tx_process_stopped_irq++; + stmmac_tx_err(priv); + } + if (unlikely(intr_status & DMA_STATUS_FBI)) { + DBG(intr, INFO, "fatal bus error\n"); + priv->xstats.fatal_bus_error_irq++; + stmmac_tx_err(priv); + } + } + + /* TX/RX NORMAL interrupts */ + if (intr_status & DMA_STATUS_NIS) { + priv->xstats.normal_irq_n++; + if (likely((intr_status & DMA_STATUS_RI) || + (intr_status & (DMA_STATUS_TI)))) + _stmmac_schedule(priv); + } + + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_info("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ + writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); + + DBG(intr, INFO, "\n\n"); + + return; +} + +/** + * stmmac_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_open(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int ret; + + /* Check that the MAC address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using the following linux command: + * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */ + if (!is_valid_ether_addr(dev->dev_addr)) { + random_ether_addr(dev->dev_addr); + pr_warning("%s: generated random MAC address %pM\n", dev->name, + dev->dev_addr); + } + + stmmac_verify_args(); + + ret = stmmac_init_phy(dev); + if (unlikely(ret)) { + pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); + return ret; + } + + /* Request the IRQ lines */ + ret = request_irq(dev->irq, &stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, dev->irq, ret); + return ret; + } + +#ifdef CONFIG_STMMAC_TIMER + priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + if (unlikely(priv->tm == NULL)) { + pr_err("%s: ERROR: timer memory alloc failed \n", __func__); + return -ENOMEM; + } + priv->tm->freq = tmrate; + + /* Test if the external timer can be actually used. + * In case of failure continue without timer. */ + if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { + pr_warning("stmmaceth: cannot attach the external timer.\n"); + tmrate = 0; + priv->tm->freq = 0; + priv->tm->timer_start = stmmac_no_timer_started; + priv->tm->timer_stop = stmmac_no_timer_stopped; + } else + priv->tm->enable = 1; +#endif + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); + priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); + priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + if (unlikely(priv->mac_type->ops->dma_init(ioaddr, + priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) { + + pr_err("%s: DMA initialization failed\n", __func__); + return -1; + } + + /* Copy the MAC addr into the HW */ + priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0); + /* Initialize the MAC Core */ + priv->mac_type->ops->core_init(ioaddr); + + priv->shutdown = 0; + + /* Initialise the MMC (if present) to disable all interrupts. */ + writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK); + writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK); + + /* Enable the MAC Rx/Tx */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + + /* Set the HW DMA mode and the COE */ + stmmac_dma_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); + priv->xstats.threshold = tc; + + /* Start the ball rolling... */ + DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + /* Dump DMA/MAC registers */ + if (netif_msg_hw(priv)) { + priv->mac_type->ops->dump_mac_regs(ioaddr); + priv->mac_type->ops->dump_dma_regs(ioaddr); + } + + if (priv->phydev) + phy_start(priv->phydev); + + napi_enable(&priv->napi); + skb_queue_head_init(&priv->rx_recycle); + netif_start_queue(dev); + return 0; +} + +/** + * stmmac_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int stmmac_release(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_stop_queue(dev); + +#ifdef CONFIG_STMMAC_TIMER + /* Stop and release the timer */ + stmmac_close_ext_timer(); + if (priv->tm != NULL) + kfree(priv->tm); +#endif + napi_disable(&priv->napi); + skb_queue_purge(&priv->rx_recycle); + + /* Free the IRQ lines */ + free_irq(dev->irq, dev); + + /* Stop TX/RX DMA and clear the descriptors */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC core */ + stmmac_mac_disable_tx(dev->base_addr); + stmmac_mac_disable_rx(dev->base_addr); + + netif_carrier_off(dev); + + return 0; +} + +/* + * To perform emulated hardware segmentation on skb. + */ +static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb) +{ + struct sk_buff *segs, *curr_skb; + int gso_segs = skb_shinfo(skb)->gso_segs; + + /* Estimate the number of fragments in the worst case */ + if (unlikely(stmmac_tx_avail(priv) < gso_segs)) { + netif_stop_queue(priv->dev); + TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n", + __func__); + if (stmmac_tx_avail(priv) < gso_segs) + return NETDEV_TX_BUSY; + + netif_wake_queue(priv->dev); + } + TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n", + skb, skb->len); + + segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO); + if (unlikely(IS_ERR(segs))) + goto sw_tso_end; + + do { + curr_skb = segs; + segs = segs->next; + TX_DBG("\t\tcurrent skb->len: %d, *curr %p," + "*next %p\n", curr_skb->len, curr_skb, segs); + curr_skb->next = NULL; + stmmac_xmit(curr_skb, priv->dev); + } while (segs); + +sw_tso_end: + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb, + struct net_device *dev, + int csum_insertion) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int nopaged_len = skb_headlen(skb); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry = priv->cur_tx % txsize; + struct dma_desc *desc = priv->dma_tx + entry; + + if (nopaged_len > BUF_SIZE_8KiB) { + + int buf2_size = nopaged_len - BUF_SIZE_8KiB; + + desc->des2 = dma_map_single(priv->device, skb->data, + BUF_SIZE_8KiB, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB, + csum_insertion); + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + desc->des2 = dma_map_single(priv->device, + skb->data + BUF_SIZE_8KiB, + buf2_size, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 0, + buf2_size, csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + priv->tx_skbuff[entry] = NULL; + } else { + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + return entry; +} + +/** + * stmmac_xmit: + * @skb : the socket buffer + * @dev : device pointer + * Description : Tx entry point of the driver. + */ +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry; + int i, csum_insertion = 0; + int nfrags = skb_shinfo(skb)->nr_frags; + struct dma_desc *desc, *first; + + if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + /* This is a hard error, log it. */ + pr_err("%s: BUG! Tx Ring full when queue awake\n", + __func__); + } + return NETDEV_TX_BUSY; + } + + entry = priv->cur_tx % txsize; + +#ifdef STMMAC_XMIT_DEBUG + if ((skb->len > ETH_FRAME_LEN) || nfrags) + pr_info("stmmac xmit:\n" + "\tskb addr %p - len: %d - nopaged_len: %d\n" + "\tn_frags: %d - ip_summed: %d - %s gso\n", + skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed, + !skb_is_gso(skb) ? "isn't" : "is"); +#endif + + if (unlikely(skb_is_gso(skb))) + return stmmac_sw_tso(priv, skb); + + if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { + if (likely(priv->tx_coe == NO_HW_CSUM)) + skb_checksum_help(skb); + else + csum_insertion = 1; + } + + desc = priv->dma_tx + entry; + first = desc; + +#ifdef STMMAC_XMIT_DEBUG + if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN)) + pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n" + "\t\tn_frags: %d, ip_summed: %d\n", + skb->len, skb_headlen(skb), nfrags, skb->ip_summed); +#endif + priv->tx_skbuff[entry] = skb; + if (unlikely(skb->len >= BUF_SIZE_4KiB)) { + entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion); + desc = priv->dma_tx + entry; + } else { + unsigned int nopaged_len = skb_headlen(skb); + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + int len = frag->size; + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + TX_DBG("\t[entry %d] segment len: %d\n", entry, len); + desc->des2 = dma_map_page(priv->device, frag->page, + frag->page_offset, + len, DMA_TO_DEVICE); + priv->tx_skbuff[entry] = NULL; + priv->mac_type->ops->prepare_tx_desc(desc, 0, len, + csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + } + + /* Interrupt on completition only for the latest segment */ + priv->mac_type->ops->close_tx_desc(desc); + +#ifdef CONFIG_STMMAC_TIMER + /* Clean IC while using timer */ + if (likely(priv->tm->enable)) + priv->mac_type->ops->clear_tx_ic(desc); +#endif + /* To avoid raise condition */ + priv->mac_type->ops->set_tx_owner(first); + + priv->cur_tx++; + +#ifdef STMMAC_XMIT_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, " + "first=%p, nfrags=%d\n", + (priv->cur_tx % txsize), (priv->dirty_tx % txsize), + entry, first, nfrags); + display_ring(priv->dma_tx, txsize); + pr_info(">>> frame to be transmitted: "); + print_pkt(skb->data, skb->len); + } +#endif + if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) { + TX_DBG("%s: stop transmitted packets\n", __func__); + netif_stop_queue(dev); + } + + dev->stats.tx_bytes += skb->len; + + /* CSR1 enables the transmit DMA to check for new descriptor */ + writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND); + + return NETDEV_TX_OK; +} + +static inline void stmmac_rx_refill(struct stmmac_priv *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + struct dma_desc *p = priv->dma_rx; + + for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) { + unsigned int entry = priv->dirty_rx % rxsize; + if (likely(priv->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = __skb_dequeue(&priv->rx_recycle); + if (skb == NULL) + skb = netdev_alloc_skb_ip_align(priv->dev, + bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rx_skbuff[entry] = skb; + priv->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + (p + entry)->des2 = priv->rx_skbuff_dma[entry]; + if (unlikely(priv->is_gmac)) { + if (bfsize >= BUF_SIZE_8KiB) + (p + entry)->des3 = + (p + entry)->des2 + BUF_SIZE_8KiB; + } + RX_DBG(KERN_INFO "\trefill entry #%d\n", entry); + } + priv->mac_type->ops->set_rx_owner(p + entry); + } + return; +} + +static int stmmac_rx(struct stmmac_priv *priv, int limit) +{ + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->cur_rx % rxsize; + unsigned int next_entry; + unsigned int count = 0; + struct dma_desc *p = priv->dma_rx + entry; + struct dma_desc *p_next; + +#ifdef STMMAC_RX_DEBUG + if (netif_msg_hw(priv)) { + pr_debug(">>> stmmac_rx: descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + } +#endif + count = 0; + while (!priv->mac_type->ops->get_rx_owner(p)) { + int status; + + if (count >= limit) + break; + + count++; + + next_entry = (++priv->cur_rx) % rxsize; + p_next = priv->dma_rx + next_entry; + prefetch(p_next); + + /* read the status of the incoming frame */ + status = (priv->mac_type->ops->rx_status(&priv->dev->stats, + &priv->xstats, p)); + if (unlikely(status == discard_frame)) + priv->dev->stats.rx_errors++; + else { + struct sk_buff *skb; + /* Length should omit the CRC */ + int frame_len = + priv->mac_type->ops->get_rx_frame_len(p) - 4; + +#ifdef STMMAC_RX_DEBUG + if (frame_len > ETH_FRAME_LEN) + pr_debug("\tRX frame size %d, COE status: %d\n", + frame_len, status); + + if (netif_msg_hw(priv)) + pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", + p, entry, p->des2); +#endif + skb = priv->rx_skbuff[entry]; + if (unlikely(!skb)) { + pr_err("%s: Inconsistent Rx descriptor chain\n", + priv->dev->name); + priv->dev->stats.rx_dropped++; + break; + } + prefetch(skb->data - NET_IP_ALIGN); + priv->rx_skbuff[entry] = NULL; + + skb_put(skb, frame_len); + dma_unmap_single(priv->device, + priv->rx_skbuff_dma[entry], + priv->dma_buf_sz, DMA_FROM_DEVICE); +#ifdef STMMAC_RX_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info(" frame received (%dbytes)", frame_len); + print_pkt(skb->data, frame_len); + } +#endif + skb->protocol = eth_type_trans(skb, priv->dev); + + if (unlikely(status == csum_none)) { + /* always for the old mac 10/100 */ + skb->ip_summed = CHECKSUM_NONE; + netif_receive_skb(skb); + } else { + skb->ip_summed = CHECKSUM_UNNECESSARY; + napi_gro_receive(&priv->napi, skb); + } + + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += frame_len; + priv->dev->last_rx = jiffies; + } + entry = next_entry; + p = p_next; /* use prefetched values */ + } + + stmmac_rx_refill(priv); + + priv->xstats.rx_pkt_n += count; + + return count; +} + +/** + * stmmac_poll - stmmac poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * This function implements the the reception process. + * Also it runs the TX completion thread + */ +static int stmmac_poll(struct napi_struct *napi, int budget) +{ + struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi); + int work_done = 0; + + priv->xstats.poll_n++; + stmmac_tx(priv); + work_done = stmmac_rx(priv, budget); + + if (work_done < budget) { + napi_complete(napi); + stmmac_enable_irq(priv); + } + return work_done; +} + +/** + * stmmac_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable tmrate. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void stmmac_tx_timeout(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Clear Tx resources and restart transmitting again */ + stmmac_tx_err(priv); + return; +} + +/* Configuration changes (passed on by ifconfig) */ +static int stmmac_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) { + pr_warning("%s: can't change I/O address\n", dev->name); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != dev->irq) { + pr_warning("%s: can't change IRQ number %d\n", + dev->name, dev->irq); + return -EOPNOTSUPP; + } + + /* ignore other fields */ + return 0; +} + +/** + * stmmac_multicast_list - entry point for multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. + * Return value: + * void. + */ +static void stmmac_multicast_list(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + priv->mac_type->ops->set_filter(dev); + spin_unlock(&priv->lock); + return; +} + +/** + * stmmac_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_change_mtu(struct net_device *dev, int new_mtu) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int max_mtu; + + if (netif_running(dev)) { + pr_err("%s: must be stopped to change its MTU\n", dev->name); + return -EBUSY; + } + + if (priv->is_gmac) + max_mtu = JUMBO_LEN; + else + max_mtu = ETH_DATA_LEN; + + if ((new_mtu < 46) || (new_mtu > max_mtu)) { + pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); + return -EINVAL; + } + + dev->mtu = new_mtu; + + return 0; +} + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct stmmac_priv *priv = netdev_priv(dev); + + if (unlikely(!dev)) { + pr_err("%s: invalid dev pointer\n", __func__); + return IRQ_NONE; + } + + if (priv->is_gmac) { + unsigned long ioaddr = dev->base_addr; + /* To handle GMAC own interrupts */ + priv->mac_type->ops->host_irq_status(ioaddr); + } + stmmac_dma_interrupt(dev); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling receive - used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. */ +static void stmmac_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + stmmac_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/** + * stmmac_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently there are no special functionality supported in IOCTL, just the + * phy_mii_ioctl(...) can be invoked. + */ +static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + + spin_lock(&priv->lock); + ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); + spin_unlock(&priv->lock); + default: + break; + } + return ret; +} + +#ifdef STMMAC_VLAN_TAG_USED +static void stmmac_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp); + + spin_lock(&priv->lock); + priv->vlgrp = grp; + spin_unlock(&priv->lock); + + return; +} +#endif + +static const struct net_device_ops stmmac_netdev_ops = { + .ndo_open = stmmac_open, + .ndo_start_xmit = stmmac_xmit, + .ndo_stop = stmmac_release, + .ndo_change_mtu = stmmac_change_mtu, + .ndo_set_multicast_list = stmmac_multicast_list, + .ndo_tx_timeout = stmmac_tx_timeout, + .ndo_do_ioctl = stmmac_ioctl, + .ndo_set_config = stmmac_config, +#ifdef STMMAC_VLAN_TAG_USED + .ndo_vlan_rx_register = stmmac_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = stmmac_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/** + * stmmac_probe - Initialization of the adapter . + * @dev : device pointer + * Description: The function initializes the network device structure for + * the STMMAC driver. It also calls the low level routines + * in order to init the HW (i.e. the DMA engine) + */ +static int stmmac_probe(struct net_device *dev) +{ + int ret = 0; + struct stmmac_priv *priv = netdev_priv(dev); + + ether_setup(dev); + + dev->netdev_ops = &stmmac_netdev_ops; + stmmac_set_ethtool_ops(dev); + + dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA); + dev->watchdog_timeo = msecs_to_jiffies(watchdog); +#ifdef STMMAC_VLAN_TAG_USED + /* Both mac100 and gmac support receive VLAN tag detection */ + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + if (priv->is_gmac) + priv->rx_csum = 1; + + if (flow_ctrl) + priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ + + priv->pause = pause; + netif_napi_add(dev, &priv->napi, stmmac_poll, 64); + + /* Get the MAC address */ + priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0); + + if (!is_valid_ether_addr(dev->dev_addr)) + pr_warning("\tno valid MAC address;" + "please, use ifconfig or nwhwconfig!\n"); + + ret = register_netdev(dev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", + __func__, ret); + return -ENODEV; + } + + DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n", + dev->name, (dev->features & NETIF_F_SG) ? "on" : "off", + (dev->features & NETIF_F_HW_CSUM) ? "on" : "off"); + + spin_lock_init(&priv->lock); + + return ret; +} + +/** + * stmmac_mac_device_setup + * @dev : device pointer + * Description: select and initialise the mac device (mac100 or Gmac). + */ +static int stmmac_mac_device_setup(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + struct mac_device_info *device; + + if (priv->is_gmac) + device = gmac_setup(ioaddr); + else + device = mac100_setup(ioaddr); + + if (!device) + return -ENOMEM; + + priv->mac_type = device; + + priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->wolopts = WAKE_MAGIC; /* Magic Frame */ + + return 0; +} + +static int stmmacphy_dvr_probe(struct platform_device *pdev) +{ + struct plat_stmmacphy_data *plat_dat; + plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data); + + pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n", + plat_dat->bus_id); + + return 0; +} + +static int stmmacphy_dvr_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver stmmacphy_driver = { + .driver = { + .name = PHY_RESOURCE_NAME, + }, + .probe = stmmacphy_dvr_probe, + .remove = stmmacphy_dvr_remove, +}; + +/** + * stmmac_associate_phy + * @dev: pointer to device structure + * @data: points to the private structure. + * Description: Scans through all the PHYs we have registered and checks if + * any are associated with our MAC. If so, then just fill in + * the blanks in our local context structure + */ +static int stmmac_associate_phy(struct device *dev, void *data) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)data; + struct plat_stmmacphy_data *plat_dat; + + plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data); + + DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__, + plat_dat->bus_id); + + /* Check that this phy is for the MAC being initialised */ + if (priv->bus_id != plat_dat->bus_id) + return 0; + + /* OK, this PHY is connected to the MAC. + Go ahead and get the parameters */ + DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__); + priv->phy_irq = + platform_get_irq_byname(to_platform_device(dev), "phyirq"); + DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__, + plat_dat->bus_id, priv->phy_irq); + + /* Override with kernel parameters if supplied XXX CRS XXX + * this needs to have multiple instances */ + if ((phyaddr >= 0) && (phyaddr <= 31)) + plat_dat->phy_addr = phyaddr; + + priv->phy_addr = plat_dat->phy_addr; + priv->phy_mask = plat_dat->phy_mask; + priv->phy_interface = plat_dat->interface; + priv->phy_reset = plat_dat->phy_reset; + + DBG(probe, DEBUG, "%s: exiting\n", __func__); + return 1; /* forces exit of driver_for_each_device() */ +} + +/** + * stmmac_dvr_probe + * @pdev: platform device pointer + * Description: the driver is initialized through platform_device. + */ +static int stmmac_dvr_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + unsigned int *addr = NULL; + struct net_device *ndev = NULL; + struct stmmac_priv *priv; + struct plat_stmmacenet_data *plat_dat; + + pr_info("STMMAC driver:\n\tplatform registration... "); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + pr_info("done!\n"); + + if (!request_mem_region(res->start, (res->end - res->start), + pdev->name)) { + pr_err("%s: ERROR: memory allocation failed" + "cannot get the I/O addr 0x%x\n", + __func__, (unsigned int)res->start); + ret = -EBUSY; + goto out; + } + + addr = ioremap(res->start, (res->end - res->start)); + if (!addr) { + pr_err("%s: ERROR: memory mapping failed \n", __func__); + ret = -ENOMEM; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct stmmac_priv)); + if (!ndev) { + pr_err("%s: ERROR: allocating the device\n", __func__); + ret = -ENOMEM; + goto out; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + /* Get the MAC information */ + ndev->irq = platform_get_irq_byname(pdev, "macirq"); + if (ndev->irq == -ENXIO) { + pr_err("%s: ERROR: MAC IRQ configuration " + "information not found\n", __func__); + ret = -ENODEV; + goto out; + } + + priv = netdev_priv(ndev); + priv->device = &(pdev->dev); + priv->dev = ndev; + plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data); + priv->bus_id = plat_dat->bus_id; + priv->pbl = plat_dat->pbl; /* TLI */ + priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ + + platform_set_drvdata(pdev, ndev); + + /* Set the I/O base addr */ + ndev->base_addr = (unsigned long)addr; + + /* MAC HW revice detection */ + ret = stmmac_mac_device_setup(ndev); + if (ret < 0) + goto out; + + /* Network Device Registration */ + ret = stmmac_probe(ndev); + if (ret < 0) + goto out; + + /* associate a PHY - it is provided by another platform bus */ + if (!driver_for_each_device + (&(stmmacphy_driver.driver), NULL, (void *)priv, + stmmac_associate_phy)) { + pr_err("No PHY device is associated with this MAC!\n"); + ret = -ENODEV; + goto out; + } + + priv->fix_mac_speed = plat_dat->fix_mac_speed; + priv->bsp_priv = plat_dat->bsp_priv; + + pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n" + "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name, + pdev->id, ndev->irq, (unsigned int)addr); + + /* MDIO bus Registration */ + pr_debug("\tMDIO bus (id: %d)...", priv->bus_id); + ret = stmmac_mdio_register(ndev); + if (ret < 0) + goto out; + pr_debug("registered!\n"); + +out: + if (ret < 0) { + platform_set_drvdata(pdev, NULL); + release_mem_region(res->start, (res->end - res->start)); + if (addr != NULL) + iounmap(addr); + } + + return ret; +} + +/** + * stmmac_dvr_remove + * @pdev: platform device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings, + * unregisters the MDIO bus and unmaps the allocated memory. + */ +static int stmmac_dvr_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct resource *res; + + pr_info("%s:\n\tremoving driver", __func__); + + stmmac_dma_stop_rx(ndev->base_addr); + stmmac_dma_stop_tx(ndev->base_addr); + + stmmac_mac_disable_rx(ndev->base_addr); + stmmac_mac_disable_tx(ndev->base_addr); + + netif_carrier_off(ndev); + + stmmac_mdio_unregister(ndev); + + platform_set_drvdata(pdev, NULL); + unregister_netdev(ndev); + + iounmap((void *)ndev->base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, (res->end - res->start)); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + int dis_ic = 0; + + if (!dev || !netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (state.event == PM_EVENT_SUSPEND) { + netif_device_detach(dev); + netif_stop_queue(dev); + if (priv->phydev) + phy_stop(priv->phydev); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_stop(); + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif + napi_disable(&priv->napi); + + /* Stop TX/RX DMA */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, + priv->dma_rx_size, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, + priv->dma_tx_size); + + stmmac_mac_disable_tx(dev->base_addr); + + if (device_may_wakeup(&(pdev->dev))) { + /* Enable Power down mode by programming the PMT regs */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, + priv->wolopts); + } else { + stmmac_mac_disable_rx(dev->base_addr); + } + } else { + priv->shutdown = 1; + /* Although this can appear slightly redundant it actually + * makes fast the standby operation and guarantees the driver + * working if hibernation is on media. */ + stmmac_release(dev); + } + + spin_unlock(&priv->lock); + return 0; +} + +static int stmmac_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + if (!netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (priv->shutdown) { + /* Re-open the interface and re-init the MAC/DMA + and the rings. */ + stmmac_open(dev); + goto out_resume; + } + + /* Power Down bit, into the PM register, is cleared + * automatically as soon as a magic packet or a Wake-up frame + * is received. Anyway, it's better to manually clear + * this bit because it can generate problems while resuming + * from another devices (e.g. serial console). */ + if (device_may_wakeup(&(pdev->dev))) + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, 0); + + netif_device_attach(dev); + + /* Enable the MAC and DMA */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + napi_enable(&priv->napi); + + if (priv->phydev) + phy_start(priv->phydev); + + netif_start_queue(dev); + +out_resume: + spin_unlock(&priv->lock); + return 0; +} +#endif + +static struct platform_driver stmmac_driver = { + .driver = { + .name = STMMAC_RESOURCE_NAME, + }, + .probe = stmmac_dvr_probe, + .remove = stmmac_dvr_remove, +#ifdef CONFIG_PM + .suspend = stmmac_suspend, + .resume = stmmac_resume, +#endif + +}; + +/** + * stmmac_init_module - Entry point for the driver + * Description: This function is the entry point for the driver. + */ +static int __init stmmac_init_module(void) +{ + int ret; + + if (platform_driver_register(&stmmacphy_driver)) { + pr_err("No PHY devices registered!\n"); + return -ENODEV; + } + + ret = platform_driver_register(&stmmac_driver); + return ret; +} + +/** + * stmmac_cleanup_module - Cleanup routine for the driver + * Description: This function is the cleanup routine for the driver. + */ +static void __exit stmmac_cleanup_module(void) +{ + platform_driver_unregister(&stmmacphy_driver); + platform_driver_unregister(&stmmac_driver); +} + +#ifndef MODULE +static int __init stmmac_cmdline_opt(char *str) +{ + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "debug:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&debug); + else if (!strncmp(opt, "phyaddr:", 8)) + strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr); + else if (!strncmp(opt, "dma_txsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_txsize); + else if (!strncmp(opt, "dma_rxsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_rxsize); + else if (!strncmp(opt, "buf_sz:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz); + else if (!strncmp(opt, "tc:", 3)) + strict_strtoul(opt + 3, 0, (unsigned long *)&tc); + else if (!strncmp(opt, "tx_coe:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe); + else if (!strncmp(opt, "watchdog:", 9)) + strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog); + else if (!strncmp(opt, "flow_ctrl:", 10)) + strict_strtoul(opt + 10, 0, + (unsigned long *)&flow_ctrl); + else if (!strncmp(opt, "pause:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&pause); +#ifdef CONFIG_STMMAC_TIMER + else if (!strncmp(opt, "tmrate:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate); +#endif + } + return 0; +} + +__setup("stmmaceth=", stmmac_cmdline_opt); +#endif + +module_init(stmmac_init_module); +module_exit(stmmac_cleanup_module); + +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c new file mode 100644 index 00000000000..8498552a22f --- /dev/null +++ b/drivers/net/stmmac/stmmac_mdio.c @@ -0,0 +1,217 @@ +/******************************************************************************* + STMMAC Ethernet Driver -- MDIO bus implementation + Provides Bus interface for MII registers + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Carl Shaw <carl.shaw@st.com> + Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define MII_BUSY 0x00000001 +#define MII_WRITE 0x00000002 + +/** + * stmmac_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * Description: it reads data from the MII register from within the phy device. + * For the 7111 GMAC, we must set the bit 0 in the MII address register while + * accessing the PHY registers. + * Fortunately, it seems this has no drawback for the 7109 MAC. + */ +static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + int data; + u16 regValue = (((phyaddr << 11) & (0x0000F800)) | + ((phyreg << 6) & (0x000007C0))); + regValue |= MII_BUSY; /* in case of GMAC */ + + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + writel(regValue, ioaddr + mii_address); + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Read the data from the MII data register */ + data = (int)readl(ioaddr + mii_data); + + return data; +} + +/** + * stmmac_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * @phydata: phy data + * Description: it writes the data into the MII register from within the device. + */ +static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + u16 value = + (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) + | MII_WRITE; + + value |= MII_BUSY; + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Set the MII address register to write */ + writel(phydata, ioaddr + mii_data); + writel(value, ioaddr + mii_address); + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + return 0; +} + +/** + * stmmac_mdio_reset + * @bus: points to the mii_bus structure + * Description: reset the MII bus + */ +static int stmmac_mdio_reset(struct mii_bus *bus) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + + if (priv->phy_reset) { + pr_debug("stmmac_mdio_reset: calling phy_reset\n"); + priv->phy_reset(priv->bsp_priv); + } + + /* This is a workaround for problems with the STE101P PHY. + * It doesn't complete its reset until at least one clock cycle + * on MDC, so perform a dummy mdio read. + */ + writel(0, ioaddr + mii_address); + + return 0; +} + +/** + * stmmac_mdio_register + * @ndev: net device structure + * Description: it registers the MII bus + */ +int stmmac_mdio_register(struct net_device *ndev) +{ + int err = 0; + struct mii_bus *new_bus; + int *irqlist; + struct stmmac_priv *priv = netdev_priv(ndev); + int addr, found; + + new_bus = mdiobus_alloc(); + if (new_bus == NULL) + return -ENOMEM; + + irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (irqlist == NULL) { + err = -ENOMEM; + goto irqlist_alloc_fail; + } + + /* Assign IRQ to phy at address phy_addr */ + if (priv->phy_addr != -1) + irqlist[priv->phy_addr] = priv->phy_irq; + + new_bus->name = "STMMAC MII Bus"; + new_bus->read = &stmmac_mdio_read; + new_bus->write = &stmmac_mdio_write; + new_bus->reset = &stmmac_mdio_reset; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + new_bus->priv = ndev; + new_bus->irq = irqlist; + new_bus->phy_mask = priv->phy_mask; + new_bus->parent = priv->device; + err = mdiobus_register(new_bus); + if (err != 0) { + pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); + goto bus_register_fail; + } + + priv->mii = new_bus; + + found = 0; + for (addr = 0; addr < 32; addr++) { + struct phy_device *phydev = new_bus->phy_map[addr]; + if (phydev) { + if (priv->phy_addr == -1) { + priv->phy_addr = addr; + phydev->irq = priv->phy_irq; + irqlist[addr] = priv->phy_irq; + } + pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n", + ndev->name, phydev->phy_id, addr, + phydev->irq, dev_name(&phydev->dev), + (addr == priv->phy_addr) ? " active" : ""); + found = 1; + } + } + + if (!found) + pr_warning("%s: No PHY found\n", ndev->name); + + return 0; +bus_register_fail: + kfree(irqlist); +irqlist_alloc_fail: + kfree(new_bus); + return err; +} + +/** + * stmmac_mdio_unregister + * @ndev: net device structure + * Description: it unregisters the MII bus + */ +int stmmac_mdio_unregister(struct net_device *ndev) +{ + struct stmmac_priv *priv = netdev_priv(ndev); + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + kfree(priv->mii); + + return 0; +} diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c new file mode 100644 index 00000000000..679f61ffb1f --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.c @@ -0,0 +1,140 @@ +/******************************************************************************* + STMMAC external timer support. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/kernel.h> +#include <linux/etherdevice.h> +#include "stmmac_timer.h" + +static void stmmac_timer_handler(void *data) +{ + struct net_device *dev = (struct net_device *)data; + + stmmac_schedule(dev); + + return; +} + +#define STMMAC_TIMER_MSG(timer, freq) \ +printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq); + +#if defined(CONFIG_STMMAC_RTC_TIMER) +#include <linux/rtc.h> +static struct rtc_device *stmmac_rtc; +static rtc_task_t stmmac_task; + +static void stmmac_rtc_start(unsigned int new_freq) +{ + rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq); + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1); + return; +} + +static void stmmac_rtc_stop(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + stmmac_task.private_data = dev; + stmmac_task.func = stmmac_timer_handler; + + stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + if (stmmac_rtc == NULL) { + pr_err("open rtc device failed\n"); + return -ENODEV; + } + + rtc_irq_register(stmmac_rtc, &stmmac_task); + + /* Periodic mode is not supported */ + if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { + pr_err("set periodic failed\n"); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return -1; + } + + STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq); + + tm->timer_start = stmmac_rtc_start; + tm->timer_stop = stmmac_rtc_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return 0; +} + +#elif defined(CONFIG_STMMAC_TMU_TIMER) +#include <linux/clk.h> +#define TMU_CHANNEL "tmu2_clk" +static struct clk *timer_clock; + +static void stmmac_tmu_start(unsigned int new_freq) +{ + clk_set_rate(timer_clock, new_freq); + clk_enable(timer_clock); + return; +} + +static void stmmac_tmu_stop(void) +{ + clk_disable(timer_clock); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + timer_clock = clk_get(NULL, TMU_CHANNEL); + + if (timer_clock == NULL) + return -1; + + if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { + timer_clock = NULL; + return -1; + } + + STMMAC_TIMER_MSG("TMU2", tm->freq); + tm->timer_start = stmmac_tmu_start; + tm->timer_stop = stmmac_tmu_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + clk_disable(timer_clock); + tmu2_unregister_user(); + clk_put(timer_clock); + return 0; +} +#endif diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h new file mode 100644 index 00000000000..6863590d184 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.h @@ -0,0 +1,42 @@ +/******************************************************************************* + STMMAC external timer Header File. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +struct stmmac_timer { + void (*timer_start) (unsigned int new_freq); + void (*timer_stop) (void); + unsigned int freq; + unsigned int enable; +}; + +/* Open the HW timer device and return 0 in case of success */ +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm); +/* Stop the timer and release it */ +int stmmac_close_ext_timer(void); +/* Function used for scheduling task within the stmmac */ +void stmmac_schedule(struct net_device *dev); + +#if defined(CONFIG_STMMAC_TMU_TIMER) +extern int tmu2_register_user(void *fnt, void *data); +extern void tmu2_unregister_user(void); +#endif diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 305ec3d783d..61640b99b70 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -38,6 +38,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/in.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/delay.h> @@ -2062,7 +2063,15 @@ static int gem_check_invariants(struct gem *gp) mif_cfg &= ~MIF_CFG_PSELECT; writel(mif_cfg, gp->regs + MIF_CFG); } else { - gp->phy_type = phy_serialink; +#ifdef CONFIG_SPARC + const char *p; + + p = of_get_property(gp->of_node, "shared-pins", NULL); + if (p && !strcmp(p, "serdes")) + gp->phy_type = phy_serdes; + else +#endif + gp->phy_type = phy_serialink; } if (gp->phy_type == phy_mii_mdio1 || gp->phy_type == phy_mii_mdio0) { diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f09bc5dfe8b..ba5d3fe753b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -902,11 +902,12 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg) struct tg3 *tp = bp->priv; u32 val; - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED) - return -EAGAIN; + spin_lock_bh(&tp->lock); if (tg3_readphy(tp, reg, &val)) - return -EIO; + val = -EIO; + + spin_unlock_bh(&tp->lock); return val; } @@ -914,14 +915,16 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg) static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val) { struct tg3 *tp = bp->priv; + u32 ret = 0; - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED) - return -EAGAIN; + spin_lock_bh(&tp->lock); if (tg3_writephy(tp, reg, val)) - return -EIO; + ret = -EIO; - return 0; + spin_unlock_bh(&tp->lock); + + return ret; } static int tg3_mdio_reset(struct mii_bus *bp) @@ -1011,12 +1014,6 @@ static void tg3_mdio_config_5785(struct tg3 *tp) static void tg3_mdio_start(struct tg3 *tp) { - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) { - mutex_lock(&tp->mdio_bus->mdio_lock); - tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED; - mutex_unlock(&tp->mdio_bus->mdio_lock); - } - tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL; tw32_f(MAC_MI_MODE, tp->mi_mode); udelay(80); @@ -1041,15 +1038,6 @@ static void tg3_mdio_start(struct tg3 *tp) tg3_mdio_config_5785(tp); } -static void tg3_mdio_stop(struct tg3 *tp) -{ - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) { - mutex_lock(&tp->mdio_bus->mdio_lock); - tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED; - mutex_unlock(&tp->mdio_bus->mdio_lock); - } -} - static int tg3_mdio_init(struct tg3 *tp) { int i; @@ -1141,7 +1129,6 @@ static void tg3_mdio_fini(struct tg3 *tp) tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED; mdiobus_unregister(tp->mdio_bus); mdiobus_free(tp->mdio_bus); - tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED; } } @@ -1363,7 +1350,7 @@ static void tg3_adjust_link(struct net_device *dev) struct tg3 *tp = netdev_priv(dev); struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR]; - spin_lock(&tp->lock); + spin_lock_bh(&tp->lock); mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX); @@ -1431,7 +1418,7 @@ static void tg3_adjust_link(struct net_device *dev) tp->link_config.active_speed = phydev->speed; tp->link_config.active_duplex = phydev->duplex; - spin_unlock(&tp->lock); + spin_unlock_bh(&tp->lock); if (linkmesg) tg3_link_report(tp); @@ -6392,8 +6379,6 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_nvram_lock(tp); - tg3_mdio_stop(tp); - tg3_ape_lock(tp, TG3_APE_LOCK_GRC); /* No matching tg3_nvram_unlock() after this because @@ -8698,6 +8683,8 @@ static int tg3_close(struct net_device *dev) del_timer_sync(&tp->timer); + tg3_phy_stop(tp); + tg3_full_lock(tp, 1); #if 0 tg3_dump_state(tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 82b45d8797b..bab7940158e 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2412,7 +2412,6 @@ struct ring_info { struct tx_ring_info { struct sk_buff *skb; - u32 prev_vlan_tag; }; struct tg3_config_info { @@ -2749,7 +2748,6 @@ struct tg3 { #define TG3_FLG3_5701_DMA_BUG 0x00000008 #define TG3_FLG3_USE_PHYLIB 0x00000010 #define TG3_FLG3_MDIOBUS_INITED 0x00000020 -#define TG3_FLG3_MDIOBUS_PAUSED 0x00000040 #define TG3_FLG3_PHY_CONNECTED 0x00000080 #define TG3_FLG3_RGMII_STD_IBND_DISABLE 0x00000100 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200 diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 525bbc5b9c9..75fa32e34fd 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -108,6 +108,7 @@ in the event that chatty debug messages are desired - jjs 12/30/98 */ #define IBMTR_DEBUG_MESSAGES 0 #include <linux/module.h> +#include <linux/sched.h> #ifdef PCMCIA /* required for ibmtr_cs.c to build */ #undef MODULE /* yes, really */ @@ -1143,9 +1144,16 @@ static void dir_open_adapter (struct net_device *dev) } else { char **prphase = printphase; char **prerror = printerror; + int pnr = err / 16 - 1; + int enr = err % 16 - 1; DPRINTK("TR Adapter misc open failure, error code = "); - printk("0x%x, Phase: %s, Error: %s\n", - err, prphase[err/16 -1], prerror[err%16 -1]); + if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) || + enr < 0 || + enr >= ARRAY_SIZE(printerror)) + printk("0x%x, invalid Phase/Error.", err); + else + printk("0x%x, Phase: %s, Error: %s\n", err, + prphase[pnr], prerror[enr]); printk(" retrying after %ds delay...\n", TR_RETRY_INTERVAL/HZ); } diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index d6d345229fe..5921f5bdd76 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -108,6 +108,7 @@ static const int multicast_filter_limit = 32; #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> #include <linux/timer.h> #include <linux/errno.h> diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index c47237c2d63..32d93564a74 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -174,7 +174,7 @@ config USB_NET_CDCETHER * Ericsson Mobile Broadband Module (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) - * Toshiba (PCX1100U and F3507g) + * Toshiba (PCX1100U and F3507g/F3607gw) * ... This driver creates an interface named "ethX", where X depends on diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4a6aff57940..21e1ba16000 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -544,20 +544,60 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { - /* Ericsson F3307 */ + /* Ericsson F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3607gw ver 3 */ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { + /* Ericsson F3307 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson C3607w */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { + /* Toshiba F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { /* Dell F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { }, // END }; diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 72470f77f55..a2b30a10064 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -649,6 +649,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index fa4e58196c2..43bc3fcc0d8 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -378,7 +378,7 @@ static void dbg_dump(int line_count, const char *func_name, unsigned char *buf, } #define DUMP(buf_, len_) \ - dbg_dump(__LINE__, __func__, buf_, len_) + dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_) #define DUMP1(buf_, len_) \ do { \ @@ -1363,7 +1363,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) /* reset the rts and dtr */ /* do the actual close */ serial->open_count--; - kref_put(&serial->parent->ref, hso_serial_ref_free); + if (serial->open_count <= 0) { serial->open_count = 0; spin_lock_irq(&serial->serial_lock); @@ -1383,6 +1383,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) usb_autopm_put_interface(serial->parent->interface); mutex_unlock(&serial->parent->mutex); + + kref_put(&serial->parent->ref, hso_serial_ref_free); } /* close the requested serial port */ @@ -1527,7 +1529,7 @@ static void tiocmget_intr_callback(struct urb *urb) dev_warn(&usb->dev, "hso received invalid serial state notification\n"); DUMP(serial_state_notification, - sizeof(hso_serial_state_notifation)) + sizeof(struct hso_serial_state_notification)); } else { UART_state_bitmap = le16_to_cpu(serial_state_notification-> diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 6fdaba8674b..ed4a508ef26 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -62,8 +62,11 @@ static char *devid=NULL; static struct usb_eth_dev usb_dev_id[] = { #define PEGASUS_DEV(pn, vid, pid, flags) \ {.name = pn, .vendor = vid, .device = pid, .private = flags}, +#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \ + PEGASUS_DEV(pn, vid, pid, flags) #include "pegasus.h" #undef PEGASUS_DEV +#undef PEGASUS_DEV_CLASS {NULL, 0, 0, 0}, {NULL, 0, 0, 0} }; @@ -71,8 +74,18 @@ static struct usb_eth_dev usb_dev_id[] = { static struct usb_device_id pegasus_ids[] = { #define PEGASUS_DEV(pn, vid, pid, flags) \ {.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid}, +/* + * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product + * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to + * ignore adaptors belonging to the "Wireless" class 0xE0. For this one + * case anyway, seeing as the pegasus is for "Wired" adaptors. + */ +#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \ + {.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \ + .idVendor = vid, .idProduct = pid, .bDeviceClass = dclass}, #include "pegasus.h" #undef PEGASUS_DEV +#undef PEGASUS_DEV_CLASS {}, {} }; diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h index f968c834ff6..5d02f020073 100644 --- a/drivers/net/usb/pegasus.h +++ b/drivers/net/usb/pegasus.h @@ -202,7 +202,11 @@ PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701, DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100, DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, +/* + * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors + * with the same product IDs by checking the device class too. + */ +PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00, DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986, DEFAULT_GPIO_RESET ) diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index d032bba9bc4..f56dec6119c 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -362,12 +362,12 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) retval = -EINVAL; goto halt_fail_and_release; } - dev->hard_mtu = tmp; - net->mtu = dev->hard_mtu - net->hard_header_len; dev_warn(&intf->dev, "dev can't take %u byte packets (max %u), " "adjusting MTU to %u\n", - dev->hard_mtu, tmp, net->mtu); + dev->hard_mtu, tmp, tmp - net->hard_header_len); + dev->hard_mtu = tmp; + net->mtu = dev->hard_mtu - net->hard_header_len; } /* REVISIT: peripheral "alignment" request is ignored ... */ @@ -418,6 +418,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) goto halt_fail_and_release; } memcpy(net->dev_addr, bp, ETH_ALEN); + memcpy(net->perm_addr, bp, ETH_ALEN); /* set a nonzero filter to enable data transfers */ memset(u.set, 0, sizeof *u.set); diff --git a/drivers/net/veth.c b/drivers/net/veth.c index ade5b344f75..52af5017c46 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -210,32 +210,29 @@ rx_drop: static struct net_device_stats *veth_get_stats(struct net_device *dev) { struct veth_priv *priv; - struct net_device_stats *dev_stats; int cpu; - struct veth_net_stats *stats; + struct veth_net_stats *stats, total = {0}; priv = netdev_priv(dev); - dev_stats = &dev->stats; - - dev_stats->rx_packets = 0; - dev_stats->tx_packets = 0; - dev_stats->rx_bytes = 0; - dev_stats->tx_bytes = 0; - dev_stats->tx_dropped = 0; - dev_stats->rx_dropped = 0; - for_each_online_cpu(cpu) { + for_each_possible_cpu(cpu) { stats = per_cpu_ptr(priv->stats, cpu); - dev_stats->rx_packets += stats->rx_packets; - dev_stats->tx_packets += stats->tx_packets; - dev_stats->rx_bytes += stats->rx_bytes; - dev_stats->tx_bytes += stats->tx_bytes; - dev_stats->tx_dropped += stats->tx_dropped; - dev_stats->rx_dropped += stats->rx_dropped; + total.rx_packets += stats->rx_packets; + total.tx_packets += stats->tx_packets; + total.rx_bytes += stats->rx_bytes; + total.tx_bytes += stats->tx_bytes; + total.tx_dropped += stats->tx_dropped; + total.rx_dropped += stats->rx_dropped; } - - return dev_stats; + dev->stats.rx_packets = total.rx_packets; + dev->stats.tx_packets = total.tx_packets; + dev->stats.rx_bytes = total.rx_bytes; + dev->stats.tx_bytes = total.tx_bytes; + dev->stats.tx_dropped = total.tx_dropped; + dev->stats.rx_dropped = total.rx_dropped; + + return &dev->stats; } static int veth_open(struct net_device *dev) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d445845f277..b9e002fccbc 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -22,7 +22,6 @@ #include <linux/ethtool.h> #include <linux/module.h> #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_net.h> #include <linux/scatterlist.h> #include <linux/if_vlan.h> @@ -454,7 +453,7 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi) vi->dev->stats.tx_bytes += skb->len; vi->dev->stats.tx_packets++; tot_sgs += skb_vnet_hdr(skb)->num_sg; - kfree_skb(skb); + dev_kfree_skb_any(skb); } return tot_sgs; } @@ -517,8 +516,7 @@ again: /* Free up any pending old buffers before queueing new ones. */ free_old_xmit_skbs(vi); - /* Put new one in send queue and do transmit */ - __skb_queue_head(&vi->send, skb); + /* Try to transmit */ capacity = xmit_skb(vi, skb); /* This can happen with OOM and indirect buffers. */ @@ -532,8 +530,17 @@ again: } return NETDEV_TX_BUSY; } - vi->svq->vq_ops->kick(vi->svq); + + /* + * Put new one in send queue. You'd expect we'd need this before + * xmit_skb calls add_buf(), since the callback can be triggered + * immediately after that. But since the callback just triggers + * another call back here, normal network xmit locking prevents the + * race. + */ + __skb_queue_head(&vi->send, skb); + /* Don't wait up for transmitted skbs to be freed. */ skb_orphan(skb); nf_reset(skb); @@ -948,7 +955,7 @@ free: return err; } -static void virtnet_remove(struct virtio_device *vdev) +static void __devexit virtnet_remove(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; struct sk_buff *skb; @@ -991,7 +998,7 @@ static unsigned int features[] = { VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, }; -static struct virtio_driver virtio_net = { +static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -1004,12 +1011,12 @@ static struct virtio_driver virtio_net = { static int __init init(void) { - return register_virtio_driver(&virtio_net); + return register_virtio_driver(&virtio_net_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_net); + unregister_virtio_driver(&virtio_net_driver); } module_init(init); module_exit(fini); diff --git a/drivers/net/vmxnet3/Makefile b/drivers/net/vmxnet3/Makefile new file mode 100644 index 00000000000..880f5098eac --- /dev/null +++ b/drivers/net/vmxnet3/Makefile @@ -0,0 +1,35 @@ +################################################################################ +# +# Linux driver for VMware's vmxnet3 ethernet NIC. +# +# Copyright (C) 2007-2009, VMware, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License and no later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or +# NON INFRINGEMENT. See the GNU General Public License for more +# details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> +# +# +################################################################################ + +# +# Makefile for the VMware vmxnet3 ethernet NIC driver +# + +obj-$(CONFIG_VMXNET3) += vmxnet3.o + +vmxnet3-objs := vmxnet3_drv.o vmxnet3_ethtool.o diff --git a/drivers/net/vmxnet3/upt1_defs.h b/drivers/net/vmxnet3/upt1_defs.h new file mode 100644 index 00000000000..37108fb226d --- /dev/null +++ b/drivers/net/vmxnet3/upt1_defs.h @@ -0,0 +1,96 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#ifndef _UPT1_DEFS_H +#define _UPT1_DEFS_H + +struct UPT1_TxStats { + u64 TSOPktsTxOK; /* TSO pkts post-segmentation */ + u64 TSOBytesTxOK; + u64 ucastPktsTxOK; + u64 ucastBytesTxOK; + u64 mcastPktsTxOK; + u64 mcastBytesTxOK; + u64 bcastPktsTxOK; + u64 bcastBytesTxOK; + u64 pktsTxError; + u64 pktsTxDiscard; +}; + +struct UPT1_RxStats { + u64 LROPktsRxOK; /* LRO pkts */ + u64 LROBytesRxOK; /* bytes from LRO pkts */ + /* the following counters are for pkts from the wire, i.e., pre-LRO */ + u64 ucastPktsRxOK; + u64 ucastBytesRxOK; + u64 mcastPktsRxOK; + u64 mcastBytesRxOK; + u64 bcastPktsRxOK; + u64 bcastBytesRxOK; + u64 pktsRxOutOfBuf; + u64 pktsRxError; +}; + +/* interrupt moderation level */ +enum { + UPT1_IML_NONE = 0, /* no interrupt moderation */ + UPT1_IML_HIGHEST = 7, /* least intr generated */ + UPT1_IML_ADAPTIVE = 8, /* adpative intr moderation */ +}; +/* values for UPT1_RSSConf.hashFunc */ +enum { + UPT1_RSS_HASH_TYPE_NONE = 0x0, + UPT1_RSS_HASH_TYPE_IPV4 = 0x01, + UPT1_RSS_HASH_TYPE_TCP_IPV4 = 0x02, + UPT1_RSS_HASH_TYPE_IPV6 = 0x04, + UPT1_RSS_HASH_TYPE_TCP_IPV6 = 0x08, +}; + +enum { + UPT1_RSS_HASH_FUNC_NONE = 0x0, + UPT1_RSS_HASH_FUNC_TOEPLITZ = 0x01, +}; + +#define UPT1_RSS_MAX_KEY_SIZE 40 +#define UPT1_RSS_MAX_IND_TABLE_SIZE 128 + +struct UPT1_RSSConf { + u16 hashType; + u16 hashFunc; + u16 hashKeySize; + u16 indTableSize; + u8 hashKey[UPT1_RSS_MAX_KEY_SIZE]; + u8 indTable[UPT1_RSS_MAX_IND_TABLE_SIZE]; +}; + +/* features */ +enum { + UPT1_F_RXCSUM = 0x0001, /* rx csum verification */ + UPT1_F_RSS = 0x0002, + UPT1_F_RXVLAN = 0x0004, /* VLAN tag stripping */ + UPT1_F_LRO = 0x0008, +}; +#endif diff --git a/drivers/net/vmxnet3/vmxnet3_defs.h b/drivers/net/vmxnet3/vmxnet3_defs.h new file mode 100644 index 00000000000..dc8ee4438a4 --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_defs.h @@ -0,0 +1,535 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#ifndef _VMXNET3_DEFS_H_ +#define _VMXNET3_DEFS_H_ + +#include "upt1_defs.h" + +/* all registers are 32 bit wide */ +/* BAR 1 */ +enum { + VMXNET3_REG_VRRS = 0x0, /* Vmxnet3 Revision Report Selection */ + VMXNET3_REG_UVRS = 0x8, /* UPT Version Report Selection */ + VMXNET3_REG_DSAL = 0x10, /* Driver Shared Address Low */ + VMXNET3_REG_DSAH = 0x18, /* Driver Shared Address High */ + VMXNET3_REG_CMD = 0x20, /* Command */ + VMXNET3_REG_MACL = 0x28, /* MAC Address Low */ + VMXNET3_REG_MACH = 0x30, /* MAC Address High */ + VMXNET3_REG_ICR = 0x38, /* Interrupt Cause Register */ + VMXNET3_REG_ECR = 0x40 /* Event Cause Register */ +}; + +/* BAR 0 */ +enum { + VMXNET3_REG_IMR = 0x0, /* Interrupt Mask Register */ + VMXNET3_REG_TXPROD = 0x600, /* Tx Producer Index */ + VMXNET3_REG_RXPROD = 0x800, /* Rx Producer Index for ring 1 */ + VMXNET3_REG_RXPROD2 = 0xA00 /* Rx Producer Index for ring 2 */ +}; + +#define VMXNET3_PT_REG_SIZE 4096 /* BAR 0 */ +#define VMXNET3_VD_REG_SIZE 4096 /* BAR 1 */ + +#define VMXNET3_REG_ALIGN 8 /* All registers are 8-byte aligned. */ +#define VMXNET3_REG_ALIGN_MASK 0x7 + +/* I/O Mapped access to registers */ +#define VMXNET3_IO_TYPE_PT 0 +#define VMXNET3_IO_TYPE_VD 1 +#define VMXNET3_IO_ADDR(type, reg) (((type) << 24) | ((reg) & 0xFFFFFF)) +#define VMXNET3_IO_TYPE(addr) ((addr) >> 24) +#define VMXNET3_IO_REG(addr) ((addr) & 0xFFFFFF) + +enum { + VMXNET3_CMD_FIRST_SET = 0xCAFE0000, + VMXNET3_CMD_ACTIVATE_DEV = VMXNET3_CMD_FIRST_SET, + VMXNET3_CMD_QUIESCE_DEV, + VMXNET3_CMD_RESET_DEV, + VMXNET3_CMD_UPDATE_RX_MODE, + VMXNET3_CMD_UPDATE_MAC_FILTERS, + VMXNET3_CMD_UPDATE_VLAN_FILTERS, + VMXNET3_CMD_UPDATE_RSSIDT, + VMXNET3_CMD_UPDATE_IML, + VMXNET3_CMD_UPDATE_PMCFG, + VMXNET3_CMD_UPDATE_FEATURE, + VMXNET3_CMD_LOAD_PLUGIN, + + VMXNET3_CMD_FIRST_GET = 0xF00D0000, + VMXNET3_CMD_GET_QUEUE_STATUS = VMXNET3_CMD_FIRST_GET, + VMXNET3_CMD_GET_STATS, + VMXNET3_CMD_GET_LINK, + VMXNET3_CMD_GET_PERM_MAC_LO, + VMXNET3_CMD_GET_PERM_MAC_HI, + VMXNET3_CMD_GET_DID_LO, + VMXNET3_CMD_GET_DID_HI, + VMXNET3_CMD_GET_DEV_EXTRA_INFO, + VMXNET3_CMD_GET_CONF_INTR +}; + +struct Vmxnet3_TxDesc { + u64 addr; + + u32 len:14; + u32 gen:1; /* generation bit */ + u32 rsvd:1; + u32 dtype:1; /* descriptor type */ + u32 ext1:1; + u32 msscof:14; /* MSS, checksum offset, flags */ + + u32 hlen:10; /* header len */ + u32 om:2; /* offload mode */ + u32 eop:1; /* End Of Packet */ + u32 cq:1; /* completion request */ + u32 ext2:1; + u32 ti:1; /* VLAN Tag Insertion */ + u32 tci:16; /* Tag to Insert */ +}; + +/* TxDesc.OM values */ +#define VMXNET3_OM_NONE 0 +#define VMXNET3_OM_CSUM 2 +#define VMXNET3_OM_TSO 3 + +/* fields in TxDesc we access w/o using bit fields */ +#define VMXNET3_TXD_EOP_SHIFT 12 +#define VMXNET3_TXD_CQ_SHIFT 13 +#define VMXNET3_TXD_GEN_SHIFT 14 + +#define VMXNET3_TXD_CQ (1 << VMXNET3_TXD_CQ_SHIFT) +#define VMXNET3_TXD_EOP (1 << VMXNET3_TXD_EOP_SHIFT) +#define VMXNET3_TXD_GEN (1 << VMXNET3_TXD_GEN_SHIFT) + +#define VMXNET3_HDR_COPY_SIZE 128 + + +struct Vmxnet3_TxDataDesc { + u8 data[VMXNET3_HDR_COPY_SIZE]; +}; + + +struct Vmxnet3_TxCompDesc { + u32 txdIdx:12; /* Index of the EOP TxDesc */ + u32 ext1:20; + + u32 ext2; + u32 ext3; + + u32 rsvd:24; + u32 type:7; /* completion type */ + u32 gen:1; /* generation bit */ +}; + + +struct Vmxnet3_RxDesc { + u64 addr; + + u32 len:14; + u32 btype:1; /* Buffer Type */ + u32 dtype:1; /* Descriptor type */ + u32 rsvd:15; + u32 gen:1; /* Generation bit */ + + u32 ext1; +}; + +/* values of RXD.BTYPE */ +#define VMXNET3_RXD_BTYPE_HEAD 0 /* head only */ +#define VMXNET3_RXD_BTYPE_BODY 1 /* body only */ + +/* fields in RxDesc we access w/o using bit fields */ +#define VMXNET3_RXD_BTYPE_SHIFT 14 +#define VMXNET3_RXD_GEN_SHIFT 31 + + +struct Vmxnet3_RxCompDesc { + u32 rxdIdx:12; /* Index of the RxDesc */ + u32 ext1:2; + u32 eop:1; /* End of Packet */ + u32 sop:1; /* Start of Packet */ + u32 rqID:10; /* rx queue/ring ID */ + u32 rssType:4; /* RSS hash type used */ + u32 cnc:1; /* Checksum Not Calculated */ + u32 ext2:1; + + u32 rssHash; /* RSS hash value */ + + u32 len:14; /* data length */ + u32 err:1; /* Error */ + u32 ts:1; /* Tag is stripped */ + u32 tci:16; /* Tag stripped */ + + u32 csum:16; + u32 tuc:1; /* TCP/UDP Checksum Correct */ + u32 udp:1; /* UDP packet */ + u32 tcp:1; /* TCP packet */ + u32 ipc:1; /* IP Checksum Correct */ + u32 v6:1; /* IPv6 */ + u32 v4:1; /* IPv4 */ + u32 frg:1; /* IP Fragment */ + u32 fcs:1; /* Frame CRC correct */ + u32 type:7; /* completion type */ + u32 gen:1; /* generation bit */ +}; + +/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.dword[3] */ +#define VMXNET3_RCD_TUC_SHIFT 16 +#define VMXNET3_RCD_IPC_SHIFT 19 + +/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.qword[1] */ +#define VMXNET3_RCD_TYPE_SHIFT 56 +#define VMXNET3_RCD_GEN_SHIFT 63 + +/* csum OK for TCP/UDP pkts over IP */ +#define VMXNET3_RCD_CSUM_OK (1 << VMXNET3_RCD_TUC_SHIFT | \ + 1 << VMXNET3_RCD_IPC_SHIFT) + +/* value of RxCompDesc.rssType */ +enum { + VMXNET3_RCD_RSS_TYPE_NONE = 0, + VMXNET3_RCD_RSS_TYPE_IPV4 = 1, + VMXNET3_RCD_RSS_TYPE_TCPIPV4 = 2, + VMXNET3_RCD_RSS_TYPE_IPV6 = 3, + VMXNET3_RCD_RSS_TYPE_TCPIPV6 = 4, +}; + + +/* a union for accessing all cmd/completion descriptors */ +union Vmxnet3_GenericDesc { + u64 qword[2]; + u32 dword[4]; + u16 word[8]; + struct Vmxnet3_TxDesc txd; + struct Vmxnet3_RxDesc rxd; + struct Vmxnet3_TxCompDesc tcd; + struct Vmxnet3_RxCompDesc rcd; +}; + +#define VMXNET3_INIT_GEN 1 + +/* Max size of a single tx buffer */ +#define VMXNET3_MAX_TX_BUF_SIZE (1 << 14) + +/* # of tx desc needed for a tx buffer size */ +#define VMXNET3_TXD_NEEDED(size) (((size) + VMXNET3_MAX_TX_BUF_SIZE - 1) / \ + VMXNET3_MAX_TX_BUF_SIZE) + +/* max # of tx descs for a non-tso pkt */ +#define VMXNET3_MAX_TXD_PER_PKT 16 + +/* Max size of a single rx buffer */ +#define VMXNET3_MAX_RX_BUF_SIZE ((1 << 14) - 1) +/* Minimum size of a type 0 buffer */ +#define VMXNET3_MIN_T0_BUF_SIZE 128 +#define VMXNET3_MAX_CSUM_OFFSET 1024 + +/* Ring base address alignment */ +#define VMXNET3_RING_BA_ALIGN 512 +#define VMXNET3_RING_BA_MASK (VMXNET3_RING_BA_ALIGN - 1) + +/* Ring size must be a multiple of 32 */ +#define VMXNET3_RING_SIZE_ALIGN 32 +#define VMXNET3_RING_SIZE_MASK (VMXNET3_RING_SIZE_ALIGN - 1) + +/* Max ring size */ +#define VMXNET3_TX_RING_MAX_SIZE 4096 +#define VMXNET3_TC_RING_MAX_SIZE 4096 +#define VMXNET3_RX_RING_MAX_SIZE 4096 +#define VMXNET3_RC_RING_MAX_SIZE 8192 + +/* a list of reasons for queue stop */ + +enum { + VMXNET3_ERR_NOEOP = 0x80000000, /* cannot find the EOP desc of a pkt */ + VMXNET3_ERR_TXD_REUSE = 0x80000001, /* reuse TxDesc before tx completion */ + VMXNET3_ERR_BIG_PKT = 0x80000002, /* too many TxDesc for a pkt */ + VMXNET3_ERR_DESC_NOT_SPT = 0x80000003, /* descriptor type not supported */ + VMXNET3_ERR_SMALL_BUF = 0x80000004, /* type 0 buffer too small */ + VMXNET3_ERR_STRESS = 0x80000005, /* stress option firing in vmkernel */ + VMXNET3_ERR_SWITCH = 0x80000006, /* mode switch failure */ + VMXNET3_ERR_TXD_INVALID = 0x80000007, /* invalid TxDesc */ +}; + +/* completion descriptor types */ +#define VMXNET3_CDTYPE_TXCOMP 0 /* Tx Completion Descriptor */ +#define VMXNET3_CDTYPE_RXCOMP 3 /* Rx Completion Descriptor */ + +enum { + VMXNET3_GOS_BITS_UNK = 0, /* unknown */ + VMXNET3_GOS_BITS_32 = 1, + VMXNET3_GOS_BITS_64 = 2, +}; + +#define VMXNET3_GOS_TYPE_LINUX 1 + + +struct Vmxnet3_GOSInfo { + u32 gosBits:2; /* 32-bit or 64-bit? */ + u32 gosType:4; /* which guest */ + u32 gosVer:16; /* gos version */ + u32 gosMisc:10; /* other info about gos */ +}; + + +struct Vmxnet3_DriverInfo { + u32 version; + struct Vmxnet3_GOSInfo gos; + u32 vmxnet3RevSpt; + u32 uptVerSpt; +}; + + +#define VMXNET3_REV1_MAGIC 0xbabefee1 + +/* + * QueueDescPA must be 128 bytes aligned. It points to an array of + * Vmxnet3_TxQueueDesc followed by an array of Vmxnet3_RxQueueDesc. + * The number of Vmxnet3_TxQueueDesc/Vmxnet3_RxQueueDesc are specified by + * Vmxnet3_MiscConf.numTxQueues/numRxQueues, respectively. + */ +#define VMXNET3_QUEUE_DESC_ALIGN 128 + + +struct Vmxnet3_MiscConf { + struct Vmxnet3_DriverInfo driverInfo; + u64 uptFeatures; + u64 ddPA; /* driver data PA */ + u64 queueDescPA; /* queue descriptor table PA */ + u32 ddLen; /* driver data len */ + u32 queueDescLen; /* queue desc. table len in bytes */ + u32 mtu; + u16 maxNumRxSG; + u8 numTxQueues; + u8 numRxQueues; + u32 reserved[4]; +}; + + +struct Vmxnet3_TxQueueConf { + u64 txRingBasePA; + u64 dataRingBasePA; + u64 compRingBasePA; + u64 ddPA; /* driver data */ + u64 reserved; + u32 txRingSize; /* # of tx desc */ + u32 dataRingSize; /* # of data desc */ + u32 compRingSize; /* # of comp desc */ + u32 ddLen; /* size of driver data */ + u8 intrIdx; + u8 _pad[7]; +}; + + +struct Vmxnet3_RxQueueConf { + u64 rxRingBasePA[2]; + u64 compRingBasePA; + u64 ddPA; /* driver data */ + u64 reserved; + u32 rxRingSize[2]; /* # of rx desc */ + u32 compRingSize; /* # of rx comp desc */ + u32 ddLen; /* size of driver data */ + u8 intrIdx; + u8 _pad[7]; +}; + + +enum vmxnet3_intr_mask_mode { + VMXNET3_IMM_AUTO = 0, + VMXNET3_IMM_ACTIVE = 1, + VMXNET3_IMM_LAZY = 2 +}; + +enum vmxnet3_intr_type { + VMXNET3_IT_AUTO = 0, + VMXNET3_IT_INTX = 1, + VMXNET3_IT_MSI = 2, + VMXNET3_IT_MSIX = 3 +}; + +#define VMXNET3_MAX_TX_QUEUES 8 +#define VMXNET3_MAX_RX_QUEUES 16 +/* addition 1 for events */ +#define VMXNET3_MAX_INTRS 25 + + +struct Vmxnet3_IntrConf { + bool autoMask; + u8 numIntrs; /* # of interrupts */ + u8 eventIntrIdx; + u8 modLevels[VMXNET3_MAX_INTRS]; /* moderation level for + * each intr */ + u32 reserved[3]; +}; + +/* one bit per VLAN ID, the size is in the units of u32 */ +#define VMXNET3_VFT_SIZE (4096 / (sizeof(u32) * 8)) + + +struct Vmxnet3_QueueStatus { + bool stopped; + u8 _pad[3]; + u32 error; +}; + + +struct Vmxnet3_TxQueueCtrl { + u32 txNumDeferred; + u32 txThreshold; + u64 reserved; +}; + + +struct Vmxnet3_RxQueueCtrl { + bool updateRxProd; + u8 _pad[7]; + u64 reserved; +}; + +enum { + VMXNET3_RXM_UCAST = 0x01, /* unicast only */ + VMXNET3_RXM_MCAST = 0x02, /* multicast passing the filters */ + VMXNET3_RXM_BCAST = 0x04, /* broadcast only */ + VMXNET3_RXM_ALL_MULTI = 0x08, /* all multicast */ + VMXNET3_RXM_PROMISC = 0x10 /* promiscuous */ +}; + +struct Vmxnet3_RxFilterConf { + u32 rxMode; /* VMXNET3_RXM_xxx */ + u16 mfTableLen; /* size of the multicast filter table */ + u16 _pad1; + u64 mfTablePA; /* PA of the multicast filters table */ + u32 vfTable[VMXNET3_VFT_SIZE]; /* vlan filter */ +}; + + +#define VMXNET3_PM_MAX_FILTERS 6 +#define VMXNET3_PM_MAX_PATTERN_SIZE 128 +#define VMXNET3_PM_MAX_MASK_SIZE (VMXNET3_PM_MAX_PATTERN_SIZE / 8) + +#define VMXNET3_PM_WAKEUP_MAGIC 0x01 /* wake up on magic pkts */ +#define VMXNET3_PM_WAKEUP_FILTER 0x02 /* wake up on pkts matching + * filters */ + + +struct Vmxnet3_PM_PktFilter { + u8 maskSize; + u8 patternSize; + u8 mask[VMXNET3_PM_MAX_MASK_SIZE]; + u8 pattern[VMXNET3_PM_MAX_PATTERN_SIZE]; + u8 pad[6]; +}; + + +struct Vmxnet3_PMConf { + u16 wakeUpEvents; /* VMXNET3_PM_WAKEUP_xxx */ + u8 numFilters; + u8 pad[5]; + struct Vmxnet3_PM_PktFilter filters[VMXNET3_PM_MAX_FILTERS]; +}; + + +struct Vmxnet3_VariableLenConfDesc { + u32 confVer; + u32 confLen; + u64 confPA; +}; + + +struct Vmxnet3_TxQueueDesc { + struct Vmxnet3_TxQueueCtrl ctrl; + struct Vmxnet3_TxQueueConf conf; + + /* Driver read after a GET command */ + struct Vmxnet3_QueueStatus status; + struct UPT1_TxStats stats; + u8 _pad[88]; /* 128 aligned */ +}; + + +struct Vmxnet3_RxQueueDesc { + struct Vmxnet3_RxQueueCtrl ctrl; + struct Vmxnet3_RxQueueConf conf; + /* Driver read after a GET commad */ + struct Vmxnet3_QueueStatus status; + struct UPT1_RxStats stats; + u8 __pad[88]; /* 128 aligned */ +}; + + +struct Vmxnet3_DSDevRead { + /* read-only region for device, read by dev in response to a SET cmd */ + struct Vmxnet3_MiscConf misc; + struct Vmxnet3_IntrConf intrConf; + struct Vmxnet3_RxFilterConf rxFilterConf; + struct Vmxnet3_VariableLenConfDesc rssConfDesc; + struct Vmxnet3_VariableLenConfDesc pmConfDesc; + struct Vmxnet3_VariableLenConfDesc pluginConfDesc; +}; + +/* All structures in DriverShared are padded to multiples of 8 bytes */ +struct Vmxnet3_DriverShared { + u32 magic; + /* make devRead start at 64bit boundaries */ + u32 pad; + struct Vmxnet3_DSDevRead devRead; + u32 ecr; + u32 reserved[5]; +}; + + +#define VMXNET3_ECR_RQERR (1 << 0) +#define VMXNET3_ECR_TQERR (1 << 1) +#define VMXNET3_ECR_LINK (1 << 2) +#define VMXNET3_ECR_DIC (1 << 3) +#define VMXNET3_ECR_DEBUG (1 << 4) + +/* flip the gen bit of a ring */ +#define VMXNET3_FLIP_RING_GEN(gen) ((gen) = (gen) ^ 0x1) + +/* only use this if moving the idx won't affect the gen bit */ +#define VMXNET3_INC_RING_IDX_ONLY(idx, ring_size) \ + do {\ + (idx)++;\ + if (unlikely((idx) == (ring_size))) {\ + (idx) = 0;\ + } \ + } while (0) + +#define VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid) \ + (vfTable[vid >> 5] |= (1 << (vid & 31))) +#define VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid) \ + (vfTable[vid >> 5] &= ~(1 << (vid & 31))) + +#define VMXNET3_VFTABLE_ENTRY_IS_SET(vfTable, vid) \ + ((vfTable[vid >> 5] & (1 << (vid & 31))) != 0) + +#define VMXNET3_MAX_MTU 9000 +#define VMXNET3_MIN_MTU 60 + +#define VMXNET3_LINK_UP (10000 << 16 | 1) /* 10 Gbps, up */ +#define VMXNET3_LINK_DOWN 0 + +#endif /* _VMXNET3_DEFS_H_ */ diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c new file mode 100644 index 00000000000..004353a46af --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -0,0 +1,2574 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#include "vmxnet3_int.h" + +char vmxnet3_driver_name[] = "vmxnet3"; +#define VMXNET3_DRIVER_DESC "VMware vmxnet3 virtual NIC driver" + + +/* + * PCI Device ID Table + * Last entry must be all 0s + */ +static const struct pci_device_id vmxnet3_pciid_table[] = { + {PCI_VDEVICE(VMWARE, PCI_DEVICE_ID_VMWARE_VMXNET3)}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table); + +static atomic_t devices_found; + + +/* + * Enable/Disable the given intr + */ +static void +vmxnet3_enable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx) +{ + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 0); +} + + +static void +vmxnet3_disable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx) +{ + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 1); +} + + +/* + * Enable/Disable all intrs used by the device + */ +static void +vmxnet3_enable_all_intrs(struct vmxnet3_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->intr.num_intrs; i++) + vmxnet3_enable_intr(adapter, i); +} + + +static void +vmxnet3_disable_all_intrs(struct vmxnet3_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->intr.num_intrs; i++) + vmxnet3_disable_intr(adapter, i); +} + + +static void +vmxnet3_ack_events(struct vmxnet3_adapter *adapter, u32 events) +{ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_ECR, events); +} + + +static bool +vmxnet3_tq_stopped(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + return netif_queue_stopped(adapter->netdev); +} + + +static void +vmxnet3_tq_start(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + tq->stopped = false; + netif_start_queue(adapter->netdev); +} + + +static void +vmxnet3_tq_wake(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + tq->stopped = false; + netif_wake_queue(adapter->netdev); +} + + +static void +vmxnet3_tq_stop(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter) +{ + tq->stopped = true; + tq->num_stop++; + netif_stop_queue(adapter->netdev); +} + + +/* + * Check the link state. This may start or stop the tx queue. + */ +static void +vmxnet3_check_link(struct vmxnet3_adapter *adapter) +{ + u32 ret; + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK); + ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + adapter->link_speed = ret >> 16; + if (ret & 1) { /* Link is up. */ + printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n", + adapter->netdev->name, adapter->link_speed); + if (!netif_carrier_ok(adapter->netdev)) + netif_carrier_on(adapter->netdev); + + vmxnet3_tq_start(&adapter->tx_queue, adapter); + } else { + printk(KERN_INFO "%s: NIC Link is Down\n", + adapter->netdev->name); + if (netif_carrier_ok(adapter->netdev)) + netif_carrier_off(adapter->netdev); + + vmxnet3_tq_stop(&adapter->tx_queue, adapter); + } +} + + +static void +vmxnet3_process_events(struct vmxnet3_adapter *adapter) +{ + u32 events = adapter->shared->ecr; + if (!events) + return; + + vmxnet3_ack_events(adapter, events); + + /* Check if link state has changed */ + if (events & VMXNET3_ECR_LINK) + vmxnet3_check_link(adapter); + + /* Check if there is an error on xmit/recv queues */ + if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) { + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_GET_QUEUE_STATUS); + + if (adapter->tqd_start->status.stopped) { + printk(KERN_ERR "%s: tq error 0x%x\n", + adapter->netdev->name, + adapter->tqd_start->status.error); + } + if (adapter->rqd_start->status.stopped) { + printk(KERN_ERR "%s: rq error 0x%x\n", + adapter->netdev->name, + adapter->rqd_start->status.error); + } + + schedule_work(&adapter->work); + } +} + + +static void +vmxnet3_unmap_tx_buf(struct vmxnet3_tx_buf_info *tbi, + struct pci_dev *pdev) +{ + if (tbi->map_type == VMXNET3_MAP_SINGLE) + pci_unmap_single(pdev, tbi->dma_addr, tbi->len, + PCI_DMA_TODEVICE); + else if (tbi->map_type == VMXNET3_MAP_PAGE) + pci_unmap_page(pdev, tbi->dma_addr, tbi->len, + PCI_DMA_TODEVICE); + else + BUG_ON(tbi->map_type != VMXNET3_MAP_NONE); + + tbi->map_type = VMXNET3_MAP_NONE; /* to help debugging */ +} + + +static int +vmxnet3_unmap_pkt(u32 eop_idx, struct vmxnet3_tx_queue *tq, + struct pci_dev *pdev, struct vmxnet3_adapter *adapter) +{ + struct sk_buff *skb; + int entries = 0; + + /* no out of order completion */ + BUG_ON(tq->buf_info[eop_idx].sop_idx != tq->tx_ring.next2comp); + BUG_ON(tq->tx_ring.base[eop_idx].txd.eop != 1); + + skb = tq->buf_info[eop_idx].skb; + BUG_ON(skb == NULL); + tq->buf_info[eop_idx].skb = NULL; + + VMXNET3_INC_RING_IDX_ONLY(eop_idx, tq->tx_ring.size); + + while (tq->tx_ring.next2comp != eop_idx) { + vmxnet3_unmap_tx_buf(tq->buf_info + tq->tx_ring.next2comp, + pdev); + + /* update next2comp w/o tx_lock. Since we are marking more, + * instead of less, tx ring entries avail, the worst case is + * that the tx routine incorrectly re-queues a pkt due to + * insufficient tx ring entries. + */ + vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring); + entries++; + } + + dev_kfree_skb_any(skb); + return entries; +} + + +static int +vmxnet3_tq_tx_complete(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + int completed = 0; + union Vmxnet3_GenericDesc *gdesc; + + gdesc = tq->comp_ring.base + tq->comp_ring.next2proc; + while (gdesc->tcd.gen == tq->comp_ring.gen) { + completed += vmxnet3_unmap_pkt(gdesc->tcd.txdIdx, tq, + adapter->pdev, adapter); + + vmxnet3_comp_ring_adv_next2proc(&tq->comp_ring); + gdesc = tq->comp_ring.base + tq->comp_ring.next2proc; + } + + if (completed) { + spin_lock(&tq->tx_lock); + if (unlikely(vmxnet3_tq_stopped(tq, adapter) && + vmxnet3_cmd_ring_desc_avail(&tq->tx_ring) > + VMXNET3_WAKE_QUEUE_THRESHOLD(tq) && + netif_carrier_ok(adapter->netdev))) { + vmxnet3_tq_wake(tq, adapter); + } + spin_unlock(&tq->tx_lock); + } + return completed; +} + + +static void +vmxnet3_tq_cleanup(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + int i; + + while (tq->tx_ring.next2comp != tq->tx_ring.next2fill) { + struct vmxnet3_tx_buf_info *tbi; + union Vmxnet3_GenericDesc *gdesc; + + tbi = tq->buf_info + tq->tx_ring.next2comp; + gdesc = tq->tx_ring.base + tq->tx_ring.next2comp; + + vmxnet3_unmap_tx_buf(tbi, adapter->pdev); + if (tbi->skb) { + dev_kfree_skb_any(tbi->skb); + tbi->skb = NULL; + } + vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring); + } + + /* sanity check, verify all buffers are indeed unmapped and freed */ + for (i = 0; i < tq->tx_ring.size; i++) { + BUG_ON(tq->buf_info[i].skb != NULL || + tq->buf_info[i].map_type != VMXNET3_MAP_NONE); + } + + tq->tx_ring.gen = VMXNET3_INIT_GEN; + tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0; + + tq->comp_ring.gen = VMXNET3_INIT_GEN; + tq->comp_ring.next2proc = 0; +} + + +void +vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + if (tq->tx_ring.base) { + pci_free_consistent(adapter->pdev, tq->tx_ring.size * + sizeof(struct Vmxnet3_TxDesc), + tq->tx_ring.base, tq->tx_ring.basePA); + tq->tx_ring.base = NULL; + } + if (tq->data_ring.base) { + pci_free_consistent(adapter->pdev, tq->data_ring.size * + sizeof(struct Vmxnet3_TxDataDesc), + tq->data_ring.base, tq->data_ring.basePA); + tq->data_ring.base = NULL; + } + if (tq->comp_ring.base) { + pci_free_consistent(adapter->pdev, tq->comp_ring.size * + sizeof(struct Vmxnet3_TxCompDesc), + tq->comp_ring.base, tq->comp_ring.basePA); + tq->comp_ring.base = NULL; + } + kfree(tq->buf_info); + tq->buf_info = NULL; +} + + +static void +vmxnet3_tq_init(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + int i; + + /* reset the tx ring contents to 0 and reset the tx ring states */ + memset(tq->tx_ring.base, 0, tq->tx_ring.size * + sizeof(struct Vmxnet3_TxDesc)); + tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0; + tq->tx_ring.gen = VMXNET3_INIT_GEN; + + memset(tq->data_ring.base, 0, tq->data_ring.size * + sizeof(struct Vmxnet3_TxDataDesc)); + + /* reset the tx comp ring contents to 0 and reset comp ring states */ + memset(tq->comp_ring.base, 0, tq->comp_ring.size * + sizeof(struct Vmxnet3_TxCompDesc)); + tq->comp_ring.next2proc = 0; + tq->comp_ring.gen = VMXNET3_INIT_GEN; + + /* reset the bookkeeping data */ + memset(tq->buf_info, 0, sizeof(tq->buf_info[0]) * tq->tx_ring.size); + for (i = 0; i < tq->tx_ring.size; i++) + tq->buf_info[i].map_type = VMXNET3_MAP_NONE; + + /* stats are not reset */ +} + + +static int +vmxnet3_tq_create(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter) +{ + BUG_ON(tq->tx_ring.base || tq->data_ring.base || + tq->comp_ring.base || tq->buf_info); + + tq->tx_ring.base = pci_alloc_consistent(adapter->pdev, tq->tx_ring.size + * sizeof(struct Vmxnet3_TxDesc), + &tq->tx_ring.basePA); + if (!tq->tx_ring.base) { + printk(KERN_ERR "%s: failed to allocate tx ring\n", + adapter->netdev->name); + goto err; + } + + tq->data_ring.base = pci_alloc_consistent(adapter->pdev, + tq->data_ring.size * + sizeof(struct Vmxnet3_TxDataDesc), + &tq->data_ring.basePA); + if (!tq->data_ring.base) { + printk(KERN_ERR "%s: failed to allocate data ring\n", + adapter->netdev->name); + goto err; + } + + tq->comp_ring.base = pci_alloc_consistent(adapter->pdev, + tq->comp_ring.size * + sizeof(struct Vmxnet3_TxCompDesc), + &tq->comp_ring.basePA); + if (!tq->comp_ring.base) { + printk(KERN_ERR "%s: failed to allocate tx comp ring\n", + adapter->netdev->name); + goto err; + } + + tq->buf_info = kcalloc(tq->tx_ring.size, sizeof(tq->buf_info[0]), + GFP_KERNEL); + if (!tq->buf_info) { + printk(KERN_ERR "%s: failed to allocate tx bufinfo\n", + adapter->netdev->name); + goto err; + } + + return 0; + +err: + vmxnet3_tq_destroy(tq, adapter); + return -ENOMEM; +} + + +/* + * starting from ring->next2fill, allocate rx buffers for the given ring + * of the rx queue and update the rx desc. stop after @num_to_alloc buffers + * are allocated or allocation fails + */ + +static int +vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, + int num_to_alloc, struct vmxnet3_adapter *adapter) +{ + int num_allocated = 0; + struct vmxnet3_rx_buf_info *rbi_base = rq->buf_info[ring_idx]; + struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx]; + u32 val; + + while (num_allocated < num_to_alloc) { + struct vmxnet3_rx_buf_info *rbi; + union Vmxnet3_GenericDesc *gd; + + rbi = rbi_base + ring->next2fill; + gd = ring->base + ring->next2fill; + + if (rbi->buf_type == VMXNET3_RX_BUF_SKB) { + if (rbi->skb == NULL) { + rbi->skb = dev_alloc_skb(rbi->len + + NET_IP_ALIGN); + if (unlikely(rbi->skb == NULL)) { + rq->stats.rx_buf_alloc_failure++; + break; + } + rbi->skb->dev = adapter->netdev; + + skb_reserve(rbi->skb, NET_IP_ALIGN); + rbi->dma_addr = pci_map_single(adapter->pdev, + rbi->skb->data, rbi->len, + PCI_DMA_FROMDEVICE); + } else { + /* rx buffer skipped by the device */ + } + val = VMXNET3_RXD_BTYPE_HEAD << VMXNET3_RXD_BTYPE_SHIFT; + } else { + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE || + rbi->len != PAGE_SIZE); + + if (rbi->page == NULL) { + rbi->page = alloc_page(GFP_ATOMIC); + if (unlikely(rbi->page == NULL)) { + rq->stats.rx_buf_alloc_failure++; + break; + } + rbi->dma_addr = pci_map_page(adapter->pdev, + rbi->page, 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } else { + /* rx buffers skipped by the device */ + } + val = VMXNET3_RXD_BTYPE_BODY << VMXNET3_RXD_BTYPE_SHIFT; + } + + BUG_ON(rbi->dma_addr == 0); + gd->rxd.addr = rbi->dma_addr; + gd->dword[2] = (ring->gen << VMXNET3_RXD_GEN_SHIFT) | val | + rbi->len; + + num_allocated++; + vmxnet3_cmd_ring_adv_next2fill(ring); + } + rq->uncommitted[ring_idx] += num_allocated; + + dev_dbg(&adapter->netdev->dev, + "alloc_rx_buf: %d allocated, next2fill %u, next2comp " + "%u, uncommited %u\n", num_allocated, ring->next2fill, + ring->next2comp, rq->uncommitted[ring_idx]); + + /* so that the device can distinguish a full ring and an empty ring */ + BUG_ON(num_allocated != 0 && ring->next2fill == ring->next2comp); + + return num_allocated; +} + + +static void +vmxnet3_append_frag(struct sk_buff *skb, struct Vmxnet3_RxCompDesc *rcd, + struct vmxnet3_rx_buf_info *rbi) +{ + struct skb_frag_struct *frag = skb_shinfo(skb)->frags + + skb_shinfo(skb)->nr_frags; + + BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS); + + frag->page = rbi->page; + frag->page_offset = 0; + frag->size = rcd->len; + skb->data_len += frag->size; + skb_shinfo(skb)->nr_frags++; +} + + +static void +vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, + struct vmxnet3_tx_queue *tq, struct pci_dev *pdev, + struct vmxnet3_adapter *adapter) +{ + u32 dw2, len; + unsigned long buf_offset; + int i; + union Vmxnet3_GenericDesc *gdesc; + struct vmxnet3_tx_buf_info *tbi = NULL; + + BUG_ON(ctx->copy_size > skb_headlen(skb)); + + /* use the previous gen bit for the SOP desc */ + dw2 = (tq->tx_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT; + + ctx->sop_txd = tq->tx_ring.base + tq->tx_ring.next2fill; + gdesc = ctx->sop_txd; /* both loops below can be skipped */ + + /* no need to map the buffer if headers are copied */ + if (ctx->copy_size) { + ctx->sop_txd->txd.addr = tq->data_ring.basePA + + tq->tx_ring.next2fill * + sizeof(struct Vmxnet3_TxDataDesc); + ctx->sop_txd->dword[2] = dw2 | ctx->copy_size; + ctx->sop_txd->dword[3] = 0; + + tbi = tq->buf_info + tq->tx_ring.next2fill; + tbi->map_type = VMXNET3_MAP_NONE; + + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%Lx 0x%x 0x%x\n", + tq->tx_ring.next2fill, ctx->sop_txd->txd.addr, + ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + + /* use the right gen for non-SOP desc */ + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + } + + /* linear part can use multiple tx desc if it's big */ + len = skb_headlen(skb) - ctx->copy_size; + buf_offset = ctx->copy_size; + while (len) { + u32 buf_size; + + buf_size = len > VMXNET3_MAX_TX_BUF_SIZE ? + VMXNET3_MAX_TX_BUF_SIZE : len; + + tbi = tq->buf_info + tq->tx_ring.next2fill; + tbi->map_type = VMXNET3_MAP_SINGLE; + tbi->dma_addr = pci_map_single(adapter->pdev, + skb->data + buf_offset, buf_size, + PCI_DMA_TODEVICE); + + tbi->len = buf_size; /* this automatically convert 2^14 to 0 */ + + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + + gdesc->txd.addr = tbi->dma_addr; + gdesc->dword[2] = dw2 | buf_size; + gdesc->dword[3] = 0; + + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%Lx 0x%x 0x%x\n", + tq->tx_ring.next2fill, gdesc->txd.addr, + gdesc->dword[2], gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + + len -= buf_size; + buf_offset += buf_size; + } + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + + tbi = tq->buf_info + tq->tx_ring.next2fill; + tbi->map_type = VMXNET3_MAP_PAGE; + tbi->dma_addr = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + tbi->len = frag->size; + + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + + gdesc->txd.addr = tbi->dma_addr; + gdesc->dword[2] = dw2 | frag->size; + gdesc->dword[3] = 0; + + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%llu %u %u\n", + tq->tx_ring.next2fill, gdesc->txd.addr, + gdesc->dword[2], gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + } + + ctx->eop_txd = gdesc; + + /* set the last buf_info for the pkt */ + tbi->skb = skb; + tbi->sop_idx = ctx->sop_txd - tq->tx_ring.base; +} + + +/* + * parse and copy relevant protocol headers: + * For a tso pkt, relevant headers are L2/3/4 including options + * For a pkt requesting csum offloading, they are L2/3 and may include L4 + * if it's a TCP/UDP pkt + * + * Returns: + * -1: error happens during parsing + * 0: protocol headers parsed, but too big to be copied + * 1: protocol headers parsed and copied + * + * Other effects: + * 1. related *ctx fields are updated. + * 2. ctx->copy_size is # of bytes copied + * 3. the portion copied is guaranteed to be in the linear part + * + */ +static int +vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, + struct vmxnet3_tx_ctx *ctx, + struct vmxnet3_adapter *adapter) +{ + struct Vmxnet3_TxDataDesc *tdd; + + if (ctx->mss) { + ctx->eth_ip_hdr_size = skb_transport_offset(skb); + ctx->l4_hdr_size = ((struct tcphdr *) + skb_transport_header(skb))->doff * 4; + ctx->copy_size = ctx->eth_ip_hdr_size + ctx->l4_hdr_size; + } else { + unsigned int pull_size; + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + ctx->eth_ip_hdr_size = skb_transport_offset(skb); + + if (ctx->ipv4) { + struct iphdr *iph = (struct iphdr *) + skb_network_header(skb); + if (iph->protocol == IPPROTO_TCP) { + pull_size = ctx->eth_ip_hdr_size + + sizeof(struct tcphdr); + + if (unlikely(!pskb_may_pull(skb, + pull_size))) { + goto err; + } + ctx->l4_hdr_size = ((struct tcphdr *) + skb_transport_header(skb))->doff * 4; + } else if (iph->protocol == IPPROTO_UDP) { + ctx->l4_hdr_size = + sizeof(struct udphdr); + } else { + ctx->l4_hdr_size = 0; + } + } else { + /* for simplicity, don't copy L4 headers */ + ctx->l4_hdr_size = 0; + } + ctx->copy_size = ctx->eth_ip_hdr_size + + ctx->l4_hdr_size; + } else { + ctx->eth_ip_hdr_size = 0; + ctx->l4_hdr_size = 0; + /* copy as much as allowed */ + ctx->copy_size = min((unsigned int)VMXNET3_HDR_COPY_SIZE + , skb_headlen(skb)); + } + + /* make sure headers are accessible directly */ + if (unlikely(!pskb_may_pull(skb, ctx->copy_size))) + goto err; + } + + if (unlikely(ctx->copy_size > VMXNET3_HDR_COPY_SIZE)) { + tq->stats.oversized_hdr++; + ctx->copy_size = 0; + return 0; + } + + tdd = tq->data_ring.base + tq->tx_ring.next2fill; + + memcpy(tdd->data, skb->data, ctx->copy_size); + dev_dbg(&adapter->netdev->dev, + "copy %u bytes to dataRing[%u]\n", + ctx->copy_size, tq->tx_ring.next2fill); + return 1; + +err: + return -1; +} + + +static void +vmxnet3_prepare_tso(struct sk_buff *skb, + struct vmxnet3_tx_ctx *ctx) +{ + struct tcphdr *tcph = (struct tcphdr *)skb_transport_header(skb); + if (ctx->ipv4) { + struct iphdr *iph = (struct iphdr *)skb_network_header(skb); + iph->check = 0; + tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, 0, + IPPROTO_TCP, 0); + } else { + struct ipv6hdr *iph = (struct ipv6hdr *)skb_network_header(skb); + tcph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, 0, + IPPROTO_TCP, 0); + } +} + + +/* + * Transmits a pkt thru a given tq + * Returns: + * NETDEV_TX_OK: descriptors are setup successfully + * NETDEV_TX_OK: error occured, the pkt is dropped + * NETDEV_TX_BUSY: tx ring is full, queue is stopped + * + * Side-effects: + * 1. tx ring may be changed + * 2. tq stats may be updated accordingly + * 3. shared->txNumDeferred may be updated + */ + +static int +vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter, struct net_device *netdev) +{ + int ret; + u32 count; + unsigned long flags; + struct vmxnet3_tx_ctx ctx; + union Vmxnet3_GenericDesc *gdesc; + + /* conservatively estimate # of descriptors to use */ + count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + + skb_shinfo(skb)->nr_frags + 1; + + ctx.ipv4 = (skb->protocol == __constant_ntohs(ETH_P_IP)); + + ctx.mss = skb_shinfo(skb)->gso_size; + if (ctx.mss) { + if (skb_header_cloned(skb)) { + if (unlikely(pskb_expand_head(skb, 0, 0, + GFP_ATOMIC) != 0)) { + tq->stats.drop_tso++; + goto drop_pkt; + } + tq->stats.copy_skb_header++; + } + vmxnet3_prepare_tso(skb, &ctx); + } else { + if (unlikely(count > VMXNET3_MAX_TXD_PER_PKT)) { + + /* non-tso pkts must not use more than + * VMXNET3_MAX_TXD_PER_PKT entries + */ + if (skb_linearize(skb) != 0) { + tq->stats.drop_too_many_frags++; + goto drop_pkt; + } + tq->stats.linearized++; + + /* recalculate the # of descriptors to use */ + count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1; + } + } + + ret = vmxnet3_parse_and_copy_hdr(skb, tq, &ctx, adapter); + if (ret >= 0) { + BUG_ON(ret <= 0 && ctx.copy_size != 0); + /* hdrs parsed, check against other limits */ + if (ctx.mss) { + if (unlikely(ctx.eth_ip_hdr_size + ctx.l4_hdr_size > + VMXNET3_MAX_TX_BUF_SIZE)) { + goto hdr_too_big; + } + } else { + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (unlikely(ctx.eth_ip_hdr_size + + skb->csum_offset > + VMXNET3_MAX_CSUM_OFFSET)) { + goto hdr_too_big; + } + } + } + } else { + tq->stats.drop_hdr_inspect_err++; + goto drop_pkt; + } + + spin_lock_irqsave(&tq->tx_lock, flags); + + if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) { + tq->stats.tx_ring_full++; + dev_dbg(&adapter->netdev->dev, + "tx queue stopped on %s, next2comp %u" + " next2fill %u\n", adapter->netdev->name, + tq->tx_ring.next2comp, tq->tx_ring.next2fill); + + vmxnet3_tq_stop(tq, adapter); + spin_unlock_irqrestore(&tq->tx_lock, flags); + return NETDEV_TX_BUSY; + } + + /* fill tx descs related to addr & len */ + vmxnet3_map_pkt(skb, &ctx, tq, adapter->pdev, adapter); + + /* setup the EOP desc */ + ctx.eop_txd->dword[3] = VMXNET3_TXD_CQ | VMXNET3_TXD_EOP; + + /* setup the SOP desc */ + gdesc = ctx.sop_txd; + if (ctx.mss) { + gdesc->txd.hlen = ctx.eth_ip_hdr_size + ctx.l4_hdr_size; + gdesc->txd.om = VMXNET3_OM_TSO; + gdesc->txd.msscof = ctx.mss; + tq->shared->txNumDeferred += (skb->len - gdesc->txd.hlen + + ctx.mss - 1) / ctx.mss; + } else { + if (skb->ip_summed == CHECKSUM_PARTIAL) { + gdesc->txd.hlen = ctx.eth_ip_hdr_size; + gdesc->txd.om = VMXNET3_OM_CSUM; + gdesc->txd.msscof = ctx.eth_ip_hdr_size + + skb->csum_offset; + } else { + gdesc->txd.om = 0; + gdesc->txd.msscof = 0; + } + tq->shared->txNumDeferred++; + } + + if (vlan_tx_tag_present(skb)) { + gdesc->txd.ti = 1; + gdesc->txd.tci = vlan_tx_tag_get(skb); + } + + wmb(); + + /* finally flips the GEN bit of the SOP desc */ + gdesc->dword[2] ^= VMXNET3_TXD_GEN; + dev_dbg(&adapter->netdev->dev, + "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", + (u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd - + tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2], + gdesc->dword[3]); + + spin_unlock_irqrestore(&tq->tx_lock, flags); + + if (tq->shared->txNumDeferred >= tq->shared->txThreshold) { + tq->shared->txNumDeferred = 0; + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_TXPROD, + tq->tx_ring.next2fill); + } + netdev->trans_start = jiffies; + + return NETDEV_TX_OK; + +hdr_too_big: + tq->stats.drop_oversized_hdr++; +drop_pkt: + tq->stats.drop_total++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + + +static netdev_tx_t +vmxnet3_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct vmxnet3_tx_queue *tq = &adapter->tx_queue; + + return vmxnet3_tq_xmit(skb, tq, adapter, netdev); +} + + +static void +vmxnet3_rx_csum(struct vmxnet3_adapter *adapter, + struct sk_buff *skb, + union Vmxnet3_GenericDesc *gdesc) +{ + if (!gdesc->rcd.cnc && adapter->rxcsum) { + /* typical case: TCP/UDP over IP and both csums are correct */ + if ((gdesc->dword[3] & VMXNET3_RCD_CSUM_OK) == + VMXNET3_RCD_CSUM_OK) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp)); + BUG_ON(!(gdesc->rcd.v4 || gdesc->rcd.v6)); + BUG_ON(gdesc->rcd.frg); + } else { + if (gdesc->rcd.csum) { + skb->csum = htons(gdesc->rcd.csum); + skb->ip_summed = CHECKSUM_PARTIAL; + } else { + skb->ip_summed = CHECKSUM_NONE; + } + } + } else { + skb->ip_summed = CHECKSUM_NONE; + } +} + + +static void +vmxnet3_rx_error(struct vmxnet3_rx_queue *rq, struct Vmxnet3_RxCompDesc *rcd, + struct vmxnet3_rx_ctx *ctx, struct vmxnet3_adapter *adapter) +{ + rq->stats.drop_err++; + if (!rcd->fcs) + rq->stats.drop_fcs++; + + rq->stats.drop_total++; + + /* + * We do not unmap and chain the rx buffer to the skb. + * We basically pretend this buffer is not used and will be recycled + * by vmxnet3_rq_alloc_rx_buf() + */ + + /* + * ctx->skb may be NULL if this is the first and the only one + * desc for the pkt + */ + if (ctx->skb) + dev_kfree_skb_irq(ctx->skb); + + ctx->skb = NULL; +} + + +static int +vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter, int quota) +{ + static u32 rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2}; + u32 num_rxd = 0; + struct Vmxnet3_RxCompDesc *rcd; + struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx; + + rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd; + while (rcd->gen == rq->comp_ring.gen) { + struct vmxnet3_rx_buf_info *rbi; + struct sk_buff *skb; + int num_to_alloc; + struct Vmxnet3_RxDesc *rxd; + u32 idx, ring_idx; + + if (num_rxd >= quota) { + /* we may stop even before we see the EOP desc of + * the current pkt + */ + break; + } + num_rxd++; + + idx = rcd->rxdIdx; + ring_idx = rcd->rqID == rq->qid ? 0 : 1; + + rxd = &rq->rx_ring[ring_idx].base[idx].rxd; + rbi = rq->buf_info[ring_idx] + idx; + + BUG_ON(rxd->addr != rbi->dma_addr || rxd->len != rbi->len); + + if (unlikely(rcd->eop && rcd->err)) { + vmxnet3_rx_error(rq, rcd, ctx, adapter); + goto rcd_done; + } + + if (rcd->sop) { /* first buf of the pkt */ + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_HEAD || + rcd->rqID != rq->qid); + + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_SKB); + BUG_ON(ctx->skb != NULL || rbi->skb == NULL); + + if (unlikely(rcd->len == 0)) { + /* Pretend the rx buffer is skipped. */ + BUG_ON(!(rcd->sop && rcd->eop)); + dev_dbg(&adapter->netdev->dev, + "rxRing[%u][%u] 0 length\n", + ring_idx, idx); + goto rcd_done; + } + + ctx->skb = rbi->skb; + rbi->skb = NULL; + + pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + skb_put(ctx->skb, rcd->len); + } else { + BUG_ON(ctx->skb == NULL); + /* non SOP buffer must be type 1 in most cases */ + if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) { + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); + + if (rcd->len) { + pci_unmap_page(adapter->pdev, + rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + vmxnet3_append_frag(ctx->skb, rcd, rbi); + rbi->page = NULL; + } + } else { + /* + * The only time a non-SOP buffer is type 0 is + * when it's EOP and error flag is raised, which + * has already been handled. + */ + BUG_ON(true); + } + } + + skb = ctx->skb; + if (rcd->eop) { + skb->len += skb->data_len; + skb->truesize += skb->data_len; + + vmxnet3_rx_csum(adapter, skb, + (union Vmxnet3_GenericDesc *)rcd); + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if (unlikely(adapter->vlan_grp && rcd->ts)) { + vlan_hwaccel_receive_skb(skb, + adapter->vlan_grp, rcd->tci); + } else { + netif_receive_skb(skb); + } + + adapter->netdev->last_rx = jiffies; + ctx->skb = NULL; + } + +rcd_done: + /* device may skip some rx descs */ + rq->rx_ring[ring_idx].next2comp = idx; + VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp, + rq->rx_ring[ring_idx].size); + + /* refill rx buffers frequently to avoid starving the h/w */ + num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring + + ring_idx); + if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq, + ring_idx, adapter))) { + vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc, + adapter); + + /* if needed, update the register */ + if (unlikely(rq->shared->updateRxProd)) { + VMXNET3_WRITE_BAR0_REG(adapter, + rxprod_reg[ring_idx] + rq->qid * 8, + rq->rx_ring[ring_idx].next2fill); + rq->uncommitted[ring_idx] = 0; + } + } + + vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring); + rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd; + } + + return num_rxd; +} + + +static void +vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter) +{ + u32 i, ring_idx; + struct Vmxnet3_RxDesc *rxd; + + for (ring_idx = 0; ring_idx < 2; ring_idx++) { + for (i = 0; i < rq->rx_ring[ring_idx].size; i++) { + rxd = &rq->rx_ring[ring_idx].base[i].rxd; + + if (rxd->btype == VMXNET3_RXD_BTYPE_HEAD && + rq->buf_info[ring_idx][i].skb) { + pci_unmap_single(adapter->pdev, rxd->addr, + rxd->len, PCI_DMA_FROMDEVICE); + dev_kfree_skb(rq->buf_info[ring_idx][i].skb); + rq->buf_info[ring_idx][i].skb = NULL; + } else if (rxd->btype == VMXNET3_RXD_BTYPE_BODY && + rq->buf_info[ring_idx][i].page) { + pci_unmap_page(adapter->pdev, rxd->addr, + rxd->len, PCI_DMA_FROMDEVICE); + put_page(rq->buf_info[ring_idx][i].page); + rq->buf_info[ring_idx][i].page = NULL; + } + } + + rq->rx_ring[ring_idx].gen = VMXNET3_INIT_GEN; + rq->rx_ring[ring_idx].next2fill = + rq->rx_ring[ring_idx].next2comp = 0; + rq->uncommitted[ring_idx] = 0; + } + + rq->comp_ring.gen = VMXNET3_INIT_GEN; + rq->comp_ring.next2proc = 0; +} + + +void vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter) +{ + int i; + int j; + + /* all rx buffers must have already been freed */ + for (i = 0; i < 2; i++) { + if (rq->buf_info[i]) { + for (j = 0; j < rq->rx_ring[i].size; j++) + BUG_ON(rq->buf_info[i][j].page != NULL); + } + } + + + kfree(rq->buf_info[0]); + + for (i = 0; i < 2; i++) { + if (rq->rx_ring[i].base) { + pci_free_consistent(adapter->pdev, rq->rx_ring[i].size + * sizeof(struct Vmxnet3_RxDesc), + rq->rx_ring[i].base, + rq->rx_ring[i].basePA); + rq->rx_ring[i].base = NULL; + } + rq->buf_info[i] = NULL; + } + + if (rq->comp_ring.base) { + pci_free_consistent(adapter->pdev, rq->comp_ring.size * + sizeof(struct Vmxnet3_RxCompDesc), + rq->comp_ring.base, rq->comp_ring.basePA); + rq->comp_ring.base = NULL; + } +} + + +static int +vmxnet3_rq_init(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter) +{ + int i; + + /* initialize buf_info */ + for (i = 0; i < rq->rx_ring[0].size; i++) { + + /* 1st buf for a pkt is skbuff */ + if (i % adapter->rx_buf_per_pkt == 0) { + rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_SKB; + rq->buf_info[0][i].len = adapter->skb_buf_size; + } else { /* subsequent bufs for a pkt is frag */ + rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_PAGE; + rq->buf_info[0][i].len = PAGE_SIZE; + } + } + for (i = 0; i < rq->rx_ring[1].size; i++) { + rq->buf_info[1][i].buf_type = VMXNET3_RX_BUF_PAGE; + rq->buf_info[1][i].len = PAGE_SIZE; + } + + /* reset internal state and allocate buffers for both rings */ + for (i = 0; i < 2; i++) { + rq->rx_ring[i].next2fill = rq->rx_ring[i].next2comp = 0; + rq->uncommitted[i] = 0; + + memset(rq->rx_ring[i].base, 0, rq->rx_ring[i].size * + sizeof(struct Vmxnet3_RxDesc)); + rq->rx_ring[i].gen = VMXNET3_INIT_GEN; + } + if (vmxnet3_rq_alloc_rx_buf(rq, 0, rq->rx_ring[0].size - 1, + adapter) == 0) { + /* at least has 1 rx buffer for the 1st ring */ + return -ENOMEM; + } + vmxnet3_rq_alloc_rx_buf(rq, 1, rq->rx_ring[1].size - 1, adapter); + + /* reset the comp ring */ + rq->comp_ring.next2proc = 0; + memset(rq->comp_ring.base, 0, rq->comp_ring.size * + sizeof(struct Vmxnet3_RxCompDesc)); + rq->comp_ring.gen = VMXNET3_INIT_GEN; + + /* reset rxctx */ + rq->rx_ctx.skb = NULL; + + /* stats are not reset */ + return 0; +} + + +static int +vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter) +{ + int i; + size_t sz; + struct vmxnet3_rx_buf_info *bi; + + for (i = 0; i < 2; i++) { + + sz = rq->rx_ring[i].size * sizeof(struct Vmxnet3_RxDesc); + rq->rx_ring[i].base = pci_alloc_consistent(adapter->pdev, sz, + &rq->rx_ring[i].basePA); + if (!rq->rx_ring[i].base) { + printk(KERN_ERR "%s: failed to allocate rx ring %d\n", + adapter->netdev->name, i); + goto err; + } + } + + sz = rq->comp_ring.size * sizeof(struct Vmxnet3_RxCompDesc); + rq->comp_ring.base = pci_alloc_consistent(adapter->pdev, sz, + &rq->comp_ring.basePA); + if (!rq->comp_ring.base) { + printk(KERN_ERR "%s: failed to allocate rx comp ring\n", + adapter->netdev->name); + goto err; + } + + sz = sizeof(struct vmxnet3_rx_buf_info) * (rq->rx_ring[0].size + + rq->rx_ring[1].size); + bi = kmalloc(sz, GFP_KERNEL); + if (!bi) { + printk(KERN_ERR "%s: failed to allocate rx bufinfo\n", + adapter->netdev->name); + goto err; + } + memset(bi, 0, sz); + rq->buf_info[0] = bi; + rq->buf_info[1] = bi + rq->rx_ring[0].size; + + return 0; + +err: + vmxnet3_rq_destroy(rq, adapter); + return -ENOMEM; +} + + +static int +vmxnet3_do_poll(struct vmxnet3_adapter *adapter, int budget) +{ + if (unlikely(adapter->shared->ecr)) + vmxnet3_process_events(adapter); + + vmxnet3_tq_tx_complete(&adapter->tx_queue, adapter); + return vmxnet3_rq_rx_complete(&adapter->rx_queue, adapter, budget); +} + + +static int +vmxnet3_poll(struct napi_struct *napi, int budget) +{ + struct vmxnet3_adapter *adapter = container_of(napi, + struct vmxnet3_adapter, napi); + int rxd_done; + + rxd_done = vmxnet3_do_poll(adapter, budget); + + if (rxd_done < budget) { + napi_complete(napi); + vmxnet3_enable_intr(adapter, 0); + } + return rxd_done; +} + + +/* Interrupt handler for vmxnet3 */ +static irqreturn_t +vmxnet3_intr(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct vmxnet3_adapter *adapter = netdev_priv(dev); + + if (unlikely(adapter->intr.type == VMXNET3_IT_INTX)) { + u32 icr = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_ICR); + if (unlikely(icr == 0)) + /* not ours */ + return IRQ_NONE; + } + + + /* disable intr if needed */ + if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE) + vmxnet3_disable_intr(adapter, 0); + + napi_schedule(&adapter->napi); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER + + +/* netpoll callback. */ +static void +vmxnet3_netpoll(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + int irq; + +#ifdef CONFIG_PCI_MSI + if (adapter->intr.type == VMXNET3_IT_MSIX) + irq = adapter->intr.msix_entries[0].vector; + else +#endif + irq = adapter->pdev->irq; + + disable_irq(irq); + vmxnet3_intr(irq, netdev); + enable_irq(irq); +} +#endif + +static int +vmxnet3_request_irqs(struct vmxnet3_adapter *adapter) +{ + int err; + +#ifdef CONFIG_PCI_MSI + if (adapter->intr.type == VMXNET3_IT_MSIX) { + /* we only use 1 MSI-X vector */ + err = request_irq(adapter->intr.msix_entries[0].vector, + vmxnet3_intr, 0, adapter->netdev->name, + adapter->netdev); + } else +#endif + if (adapter->intr.type == VMXNET3_IT_MSI) { + err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0, + adapter->netdev->name, adapter->netdev); + } else { + err = request_irq(adapter->pdev->irq, vmxnet3_intr, + IRQF_SHARED, adapter->netdev->name, + adapter->netdev); + } + + if (err) + printk(KERN_ERR "Failed to request irq %s (intr type:%d), error" + ":%d\n", adapter->netdev->name, adapter->intr.type, err); + + + if (!err) { + int i; + /* init our intr settings */ + for (i = 0; i < adapter->intr.num_intrs; i++) + adapter->intr.mod_levels[i] = UPT1_IML_ADAPTIVE; + + /* next setup intr index for all intr sources */ + adapter->tx_queue.comp_ring.intr_idx = 0; + adapter->rx_queue.comp_ring.intr_idx = 0; + adapter->intr.event_intr_idx = 0; + + printk(KERN_INFO "%s: intr type %u, mode %u, %u vectors " + "allocated\n", adapter->netdev->name, adapter->intr.type, + adapter->intr.mask_mode, adapter->intr.num_intrs); + } + + return err; +} + + +static void +vmxnet3_free_irqs(struct vmxnet3_adapter *adapter) +{ + BUG_ON(adapter->intr.type == VMXNET3_IT_AUTO || + adapter->intr.num_intrs <= 0); + + switch (adapter->intr.type) { +#ifdef CONFIG_PCI_MSI + case VMXNET3_IT_MSIX: + { + int i; + + for (i = 0; i < adapter->intr.num_intrs; i++) + free_irq(adapter->intr.msix_entries[i].vector, + adapter->netdev); + break; + } +#endif + case VMXNET3_IT_MSI: + free_irq(adapter->pdev->irq, adapter->netdev); + break; + case VMXNET3_IT_INTX: + free_irq(adapter->pdev->irq, adapter->netdev); + break; + default: + BUG_ON(true); + } +} + + +static void +vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_DriverShared *shared = adapter->shared; + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + + if (grp) { + /* add vlan rx stripping. */ + if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) { + int i; + struct Vmxnet3_DSDevRead *devRead = &shared->devRead; + adapter->vlan_grp = grp; + + /* update FEATURES to device */ + devRead->misc.uptFeatures |= UPT1_F_RXVLAN; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + /* + * Clear entire vfTable; then enable untagged pkts. + * Note: setting one entry in vfTable to non-zero turns + * on VLAN rx filtering. + */ + for (i = 0; i < VMXNET3_VFT_SIZE; i++) + vfTable[i] = 0; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + } else { + printk(KERN_ERR "%s: vlan_rx_register when device has " + "no NETIF_F_HW_VLAN_RX\n", netdev->name); + } + } else { + /* remove vlan rx stripping. */ + struct Vmxnet3_DSDevRead *devRead = &shared->devRead; + adapter->vlan_grp = NULL; + + if (devRead->misc.uptFeatures & UPT1_F_RXVLAN) { + int i; + + for (i = 0; i < VMXNET3_VFT_SIZE; i++) { + /* clear entire vfTable; this also disables + * VLAN rx filtering + */ + vfTable[i] = 0; + } + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + + /* update FEATURES to device */ + devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + } + } +} + + +static void +vmxnet3_restore_vlan(struct vmxnet3_adapter *adapter) +{ + if (adapter->vlan_grp) { + u16 vid; + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + bool activeVlan = false; + + for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + if (vlan_group_get_device(adapter->vlan_grp, vid)) { + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + activeVlan = true; + } + } + if (activeVlan) { + /* continue to allow untagged pkts */ + VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0); + } + } +} + + +static void +vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); +} + + +static void +vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + + VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); +} + + +static u8 * +vmxnet3_copy_mc(struct net_device *netdev) +{ + u8 *buf = NULL; + u32 sz = netdev->mc_count * ETH_ALEN; + + /* struct Vmxnet3_RxFilterConf.mfTableLen is u16. */ + if (sz <= 0xffff) { + /* We may be called with BH disabled */ + buf = kmalloc(sz, GFP_ATOMIC); + if (buf) { + int i; + struct dev_mc_list *mc = netdev->mc_list; + + for (i = 0; i < netdev->mc_count; i++) { + BUG_ON(!mc); + memcpy(buf + i * ETH_ALEN, mc->dmi_addr, + ETH_ALEN); + mc = mc->next; + } + } + } + return buf; +} + + +static void +vmxnet3_set_mc(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_RxFilterConf *rxConf = + &adapter->shared->devRead.rxFilterConf; + u8 *new_table = NULL; + u32 new_mode = VMXNET3_RXM_UCAST; + + if (netdev->flags & IFF_PROMISC) + new_mode |= VMXNET3_RXM_PROMISC; + + if (netdev->flags & IFF_BROADCAST) + new_mode |= VMXNET3_RXM_BCAST; + + if (netdev->flags & IFF_ALLMULTI) + new_mode |= VMXNET3_RXM_ALL_MULTI; + else + if (netdev->mc_count > 0) { + new_table = vmxnet3_copy_mc(netdev); + if (new_table) { + new_mode |= VMXNET3_RXM_MCAST; + rxConf->mfTableLen = netdev->mc_count * + ETH_ALEN; + rxConf->mfTablePA = virt_to_phys(new_table); + } else { + printk(KERN_INFO "%s: failed to copy mcast list" + ", setting ALL_MULTI\n", netdev->name); + new_mode |= VMXNET3_RXM_ALL_MULTI; + } + } + + + if (!(new_mode & VMXNET3_RXM_MCAST)) { + rxConf->mfTableLen = 0; + rxConf->mfTablePA = 0; + } + + if (new_mode != rxConf->rxMode) { + rxConf->rxMode = new_mode; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_RX_MODE); + } + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_MAC_FILTERS); + + kfree(new_table); +} + + +/* + * Set up driver_shared based on settings in adapter. + */ + +static void +vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) +{ + struct Vmxnet3_DriverShared *shared = adapter->shared; + struct Vmxnet3_DSDevRead *devRead = &shared->devRead; + struct Vmxnet3_TxQueueConf *tqc; + struct Vmxnet3_RxQueueConf *rqc; + int i; + + memset(shared, 0, sizeof(*shared)); + + /* driver settings */ + shared->magic = VMXNET3_REV1_MAGIC; + devRead->misc.driverInfo.version = VMXNET3_DRIVER_VERSION_NUM; + devRead->misc.driverInfo.gos.gosBits = (sizeof(void *) == 4 ? + VMXNET3_GOS_BITS_32 : VMXNET3_GOS_BITS_64); + devRead->misc.driverInfo.gos.gosType = VMXNET3_GOS_TYPE_LINUX; + devRead->misc.driverInfo.vmxnet3RevSpt = 1; + devRead->misc.driverInfo.uptVerSpt = 1; + + devRead->misc.ddPA = virt_to_phys(adapter); + devRead->misc.ddLen = sizeof(struct vmxnet3_adapter); + + /* set up feature flags */ + if (adapter->rxcsum) + devRead->misc.uptFeatures |= UPT1_F_RXCSUM; + + if (adapter->lro) { + devRead->misc.uptFeatures |= UPT1_F_LRO; + devRead->misc.maxNumRxSG = 1 + MAX_SKB_FRAGS; + } + if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX) + && adapter->vlan_grp) { + devRead->misc.uptFeatures |= UPT1_F_RXVLAN; + } + + devRead->misc.mtu = adapter->netdev->mtu; + devRead->misc.queueDescPA = adapter->queue_desc_pa; + devRead->misc.queueDescLen = sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc); + + /* tx queue settings */ + BUG_ON(adapter->tx_queue.tx_ring.base == NULL); + + devRead->misc.numTxQueues = 1; + tqc = &adapter->tqd_start->conf; + tqc->txRingBasePA = adapter->tx_queue.tx_ring.basePA; + tqc->dataRingBasePA = adapter->tx_queue.data_ring.basePA; + tqc->compRingBasePA = adapter->tx_queue.comp_ring.basePA; + tqc->ddPA = virt_to_phys(adapter->tx_queue.buf_info); + tqc->txRingSize = adapter->tx_queue.tx_ring.size; + tqc->dataRingSize = adapter->tx_queue.data_ring.size; + tqc->compRingSize = adapter->tx_queue.comp_ring.size; + tqc->ddLen = sizeof(struct vmxnet3_tx_buf_info) * + tqc->txRingSize; + tqc->intrIdx = adapter->tx_queue.comp_ring.intr_idx; + + /* rx queue settings */ + devRead->misc.numRxQueues = 1; + rqc = &adapter->rqd_start->conf; + rqc->rxRingBasePA[0] = adapter->rx_queue.rx_ring[0].basePA; + rqc->rxRingBasePA[1] = adapter->rx_queue.rx_ring[1].basePA; + rqc->compRingBasePA = adapter->rx_queue.comp_ring.basePA; + rqc->ddPA = virt_to_phys(adapter->rx_queue.buf_info); + rqc->rxRingSize[0] = adapter->rx_queue.rx_ring[0].size; + rqc->rxRingSize[1] = adapter->rx_queue.rx_ring[1].size; + rqc->compRingSize = adapter->rx_queue.comp_ring.size; + rqc->ddLen = sizeof(struct vmxnet3_rx_buf_info) * + (rqc->rxRingSize[0] + rqc->rxRingSize[1]); + rqc->intrIdx = adapter->rx_queue.comp_ring.intr_idx; + + /* intr settings */ + devRead->intrConf.autoMask = adapter->intr.mask_mode == + VMXNET3_IMM_AUTO; + devRead->intrConf.numIntrs = adapter->intr.num_intrs; + for (i = 0; i < adapter->intr.num_intrs; i++) + devRead->intrConf.modLevels[i] = adapter->intr.mod_levels[i]; + + devRead->intrConf.eventIntrIdx = adapter->intr.event_intr_idx; + + /* rx filter settings */ + devRead->rxFilterConf.rxMode = 0; + vmxnet3_restore_vlan(adapter); + /* the rest are already zeroed */ +} + + +int +vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) +{ + int err; + u32 ret; + + dev_dbg(&adapter->netdev->dev, + "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes" + " %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size, + adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size, + adapter->rx_queue.rx_ring[0].size, + adapter->rx_queue.rx_ring[1].size); + + vmxnet3_tq_init(&adapter->tx_queue, adapter); + err = vmxnet3_rq_init(&adapter->rx_queue, adapter); + if (err) { + printk(KERN_ERR "Failed to init rx queue for %s: error %d\n", + adapter->netdev->name, err); + goto rq_err; + } + + err = vmxnet3_request_irqs(adapter); + if (err) { + printk(KERN_ERR "Failed to setup irq for %s: error %d\n", + adapter->netdev->name, err); + goto irq_err; + } + + vmxnet3_setup_driver_shared(adapter); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, + VMXNET3_GET_ADDR_LO(adapter->shared_pa)); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, + VMXNET3_GET_ADDR_HI(adapter->shared_pa)); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_ACTIVATE_DEV); + ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + + if (ret != 0) { + printk(KERN_ERR "Failed to activate dev %s: error %u\n", + adapter->netdev->name, ret); + err = -EINVAL; + goto activate_err; + } + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD, + adapter->rx_queue.rx_ring[0].next2fill); + VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD2, + adapter->rx_queue.rx_ring[1].next2fill); + + /* Apply the rx filter settins last. */ + vmxnet3_set_mc(adapter->netdev); + + /* + * Check link state when first activating device. It will start the + * tx queue if the link is up. + */ + vmxnet3_check_link(adapter); + + napi_enable(&adapter->napi); + vmxnet3_enable_all_intrs(adapter); + clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); + return 0; + +activate_err: + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, 0); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, 0); + vmxnet3_free_irqs(adapter); +irq_err: +rq_err: + /* free up buffers we allocated */ + vmxnet3_rq_cleanup(&adapter->rx_queue, adapter); + return err; +} + + +void +vmxnet3_reset_dev(struct vmxnet3_adapter *adapter) +{ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_RESET_DEV); +} + + +int +vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter) +{ + if (test_and_set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state)) + return 0; + + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_QUIESCE_DEV); + vmxnet3_disable_all_intrs(adapter); + + napi_disable(&adapter->napi); + netif_tx_disable(adapter->netdev); + adapter->link_speed = 0; + netif_carrier_off(adapter->netdev); + + vmxnet3_tq_cleanup(&adapter->tx_queue, adapter); + vmxnet3_rq_cleanup(&adapter->rx_queue, adapter); + vmxnet3_free_irqs(adapter); + return 0; +} + + +static void +vmxnet3_write_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = *(u32 *)mac; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACL, tmp); + + tmp = (mac[5] << 8) | mac[4]; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACH, tmp); +} + + +static int +vmxnet3_set_mac_addr(struct net_device *netdev, void *p) +{ + struct sockaddr *addr = p; + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + vmxnet3_write_mac_addr(adapter, addr->sa_data); + + return 0; +} + + +/* ==================== initialization and cleanup routines ============ */ + +static int +vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64) +{ + int err; + unsigned long mmio_start, mmio_len; + struct pci_dev *pdev = adapter->pdev; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "Failed to enable adapter %s: error %d\n", + pci_name(pdev), err); + return err; + } + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) { + if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) { + printk(KERN_ERR "pci_set_consistent_dma_mask failed " + "for adapter %s\n", pci_name(pdev)); + err = -EIO; + goto err_set_mask; + } + *dma64 = true; + } else { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) { + printk(KERN_ERR "pci_set_dma_mask failed for adapter " + "%s\n", pci_name(pdev)); + err = -EIO; + goto err_set_mask; + } + *dma64 = false; + } + + err = pci_request_selected_regions(pdev, (1 << 2) - 1, + vmxnet3_driver_name); + if (err) { + printk(KERN_ERR "Failed to request region for adapter %s: " + "error %d\n", pci_name(pdev), err); + goto err_set_mask; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + adapter->hw_addr0 = ioremap(mmio_start, mmio_len); + if (!adapter->hw_addr0) { + printk(KERN_ERR "Failed to map bar0 for adapter %s\n", + pci_name(pdev)); + err = -EIO; + goto err_ioremap; + } + + mmio_start = pci_resource_start(pdev, 1); + mmio_len = pci_resource_len(pdev, 1); + adapter->hw_addr1 = ioremap(mmio_start, mmio_len); + if (!adapter->hw_addr1) { + printk(KERN_ERR "Failed to map bar1 for adapter %s\n", + pci_name(pdev)); + err = -EIO; + goto err_bar1; + } + return 0; + +err_bar1: + iounmap(adapter->hw_addr0); +err_ioremap: + pci_release_selected_regions(pdev, (1 << 2) - 1); +err_set_mask: + pci_disable_device(pdev); + return err; +} + + +static void +vmxnet3_free_pci_resources(struct vmxnet3_adapter *adapter) +{ + BUG_ON(!adapter->pdev); + + iounmap(adapter->hw_addr0); + iounmap(adapter->hw_addr1); + pci_release_selected_regions(adapter->pdev, (1 << 2) - 1); + pci_disable_device(adapter->pdev); +} + + +static void +vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter) +{ + size_t sz; + + if (adapter->netdev->mtu <= VMXNET3_MAX_SKB_BUF_SIZE - + VMXNET3_MAX_ETH_HDR_SIZE) { + adapter->skb_buf_size = adapter->netdev->mtu + + VMXNET3_MAX_ETH_HDR_SIZE; + if (adapter->skb_buf_size < VMXNET3_MIN_T0_BUF_SIZE) + adapter->skb_buf_size = VMXNET3_MIN_T0_BUF_SIZE; + + adapter->rx_buf_per_pkt = 1; + } else { + adapter->skb_buf_size = VMXNET3_MAX_SKB_BUF_SIZE; + sz = adapter->netdev->mtu - VMXNET3_MAX_SKB_BUF_SIZE + + VMXNET3_MAX_ETH_HDR_SIZE; + adapter->rx_buf_per_pkt = 1 + (sz + PAGE_SIZE - 1) / PAGE_SIZE; + } + + /* + * for simplicity, force the ring0 size to be a multiple of + * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN + */ + sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN; + adapter->rx_queue.rx_ring[0].size = (adapter->rx_queue.rx_ring[0].size + + sz - 1) / sz * sz; + adapter->rx_queue.rx_ring[0].size = min_t(u32, + adapter->rx_queue.rx_ring[0].size, + VMXNET3_RX_RING_MAX_SIZE / sz * sz); +} + + +int +vmxnet3_create_queues(struct vmxnet3_adapter *adapter, u32 tx_ring_size, + u32 rx_ring_size, u32 rx_ring2_size) +{ + int err; + + adapter->tx_queue.tx_ring.size = tx_ring_size; + adapter->tx_queue.data_ring.size = tx_ring_size; + adapter->tx_queue.comp_ring.size = tx_ring_size; + adapter->tx_queue.shared = &adapter->tqd_start->ctrl; + adapter->tx_queue.stopped = true; + err = vmxnet3_tq_create(&adapter->tx_queue, adapter); + if (err) + return err; + + adapter->rx_queue.rx_ring[0].size = rx_ring_size; + adapter->rx_queue.rx_ring[1].size = rx_ring2_size; + vmxnet3_adjust_rx_ring_size(adapter); + adapter->rx_queue.comp_ring.size = adapter->rx_queue.rx_ring[0].size + + adapter->rx_queue.rx_ring[1].size; + adapter->rx_queue.qid = 0; + adapter->rx_queue.qid2 = 1; + adapter->rx_queue.shared = &adapter->rqd_start->ctrl; + err = vmxnet3_rq_create(&adapter->rx_queue, adapter); + if (err) + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); + + return err; +} + +static int +vmxnet3_open(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter; + int err; + + adapter = netdev_priv(netdev); + + spin_lock_init(&adapter->tx_queue.tx_lock); + + err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE); + if (err) + goto queue_err; + + err = vmxnet3_activate_dev(adapter); + if (err) + goto activate_err; + + return 0; + +activate_err: + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); +queue_err: + return err; +} + + +static int +vmxnet3_close(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + /* + * Reset_work may be in the middle of resetting the device, wait for its + * completion. + */ + while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + msleep(1); + + vmxnet3_quiesce_dev(adapter); + + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); + + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); + + + return 0; +} + + +void +vmxnet3_force_close(struct vmxnet3_adapter *adapter) +{ + /* + * we must clear VMXNET3_STATE_BIT_RESETTING, otherwise + * vmxnet3_close() will deadlock. + */ + BUG_ON(test_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)); + + /* we need to enable NAPI, otherwise dev_close will deadlock */ + napi_enable(&adapter->napi); + dev_close(adapter->netdev); +} + + +static int +vmxnet3_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + int err = 0; + + if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU) + return -EINVAL; + + if (new_mtu > 1500 && !adapter->jumbo_frame) + return -EINVAL; + + netdev->mtu = new_mtu; + + /* + * Reset_work may be in the middle of resetting the device, wait for its + * completion. + */ + while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(netdev)) { + vmxnet3_quiesce_dev(adapter); + vmxnet3_reset_dev(adapter); + + /* we need to re-create the rx queue based on the new mtu */ + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + vmxnet3_adjust_rx_ring_size(adapter); + adapter->rx_queue.comp_ring.size = + adapter->rx_queue.rx_ring[0].size + + adapter->rx_queue.rx_ring[1].size; + err = vmxnet3_rq_create(&adapter->rx_queue, adapter); + if (err) { + printk(KERN_ERR "%s: failed to re-create rx queue," + " error %d. Closing it.\n", netdev->name, err); + goto out; + } + + err = vmxnet3_activate_dev(adapter); + if (err) { + printk(KERN_ERR "%s: failed to re-activate, error %d. " + "Closing it\n", netdev->name, err); + goto out; + } + } + +out: + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); + if (err) + vmxnet3_force_close(adapter); + + return err; +} + + +static void +vmxnet3_declare_features(struct vmxnet3_adapter *adapter, bool dma64) +{ + struct net_device *netdev = adapter->netdev; + + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_LRO; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + adapter->lro = true; + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACH); + mac[4] = tmp & 0xff; + mac[5] = (tmp >> 8) & 0xff; +} + + +static void +vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) +{ + u32 cfg; + + /* intr settings */ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_GET_CONF_INTR); + cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + adapter->intr.type = cfg & 0x3; + adapter->intr.mask_mode = (cfg >> 2) & 0x3; + + if (adapter->intr.type == VMXNET3_IT_AUTO) { + int err; + +#ifdef CONFIG_PCI_MSI + adapter->intr.msix_entries[0].entry = 0; + err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries, + VMXNET3_LINUX_MAX_MSIX_VECT); + if (!err) { + adapter->intr.num_intrs = 1; + adapter->intr.type = VMXNET3_IT_MSIX; + return; + } +#endif + + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->intr.num_intrs = 1; + adapter->intr.type = VMXNET3_IT_MSI; + return; + } + } + + adapter->intr.type = VMXNET3_IT_INTX; + + /* INT-X related setting */ + adapter->intr.num_intrs = 1; +} + + +static void +vmxnet3_free_intr_resources(struct vmxnet3_adapter *adapter) +{ + if (adapter->intr.type == VMXNET3_IT_MSIX) + pci_disable_msix(adapter->pdev); + else if (adapter->intr.type == VMXNET3_IT_MSI) + pci_disable_msi(adapter->pdev); + else + BUG_ON(adapter->intr.type != VMXNET3_IT_INTX); +} + + +static void +vmxnet3_tx_timeout(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + adapter->tx_timeout_count++; + + printk(KERN_ERR "%s: tx hang\n", adapter->netdev->name); + schedule_work(&adapter->work); +} + + +static void +vmxnet3_reset_work(struct work_struct *data) +{ + struct vmxnet3_adapter *adapter; + + adapter = container_of(data, struct vmxnet3_adapter, work); + + /* if another thread is resetting the device, no need to proceed */ + if (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + return; + + /* if the device is closed, we must leave it alone */ + if (netif_running(adapter->netdev)) { + printk(KERN_INFO "%s: resetting\n", adapter->netdev->name); + vmxnet3_quiesce_dev(adapter); + vmxnet3_reset_dev(adapter); + vmxnet3_activate_dev(adapter); + } else { + printk(KERN_INFO "%s: already closed\n", adapter->netdev->name); + } + + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); +} + + +static int __devinit +vmxnet3_probe_device(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + static const struct net_device_ops vmxnet3_netdev_ops = { + .ndo_open = vmxnet3_open, + .ndo_stop = vmxnet3_close, + .ndo_start_xmit = vmxnet3_xmit_frame, + .ndo_set_mac_address = vmxnet3_set_mac_addr, + .ndo_change_mtu = vmxnet3_change_mtu, + .ndo_get_stats = vmxnet3_get_stats, + .ndo_tx_timeout = vmxnet3_tx_timeout, + .ndo_set_multicast_list = vmxnet3_set_mc, + .ndo_vlan_rx_register = vmxnet3_vlan_rx_register, + .ndo_vlan_rx_add_vid = vmxnet3_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = vmxnet3_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = vmxnet3_netpoll, +#endif + }; + int err; + bool dma64 = false; /* stupid gcc */ + u32 ver; + struct net_device *netdev; + struct vmxnet3_adapter *adapter; + u8 mac[ETH_ALEN]; + + netdev = alloc_etherdev(sizeof(struct vmxnet3_adapter)); + if (!netdev) { + printk(KERN_ERR "Failed to alloc ethernet device for adapter " + "%s\n", pci_name(pdev)); + return -ENOMEM; + } + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + + adapter->shared = pci_alloc_consistent(adapter->pdev, + sizeof(struct Vmxnet3_DriverShared), + &adapter->shared_pa); + if (!adapter->shared) { + printk(KERN_ERR "Failed to allocate memory for %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_alloc_shared; + } + + adapter->tqd_start = pci_alloc_consistent(adapter->pdev, + sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc), + &adapter->queue_desc_pa); + + if (!adapter->tqd_start) { + printk(KERN_ERR "Failed to allocate memory for %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_alloc_queue_desc; + } + adapter->rqd_start = (struct Vmxnet3_RxQueueDesc *)(adapter->tqd_start + + 1); + + adapter->pm_conf = kmalloc(sizeof(struct Vmxnet3_PMConf), GFP_KERNEL); + if (adapter->pm_conf == NULL) { + printk(KERN_ERR "Failed to allocate memory for %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_alloc_pm; + } + + err = vmxnet3_alloc_pci_resources(adapter, &dma64); + if (err < 0) + goto err_alloc_pci; + + ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_VRRS); + if (ver & 1) { + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_VRRS, 1); + } else { + printk(KERN_ERR "Incompatible h/w version (0x%x) for adapter" + " %s\n", ver, pci_name(pdev)); + err = -EBUSY; + goto err_ver; + } + + ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_UVRS); + if (ver & 1) { + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_UVRS, 1); + } else { + printk(KERN_ERR "Incompatible upt version (0x%x) for " + "adapter %s\n", ver, pci_name(pdev)); + err = -EBUSY; + goto err_ver; + } + + vmxnet3_declare_features(adapter, dma64); + + adapter->dev_number = atomic_read(&devices_found); + vmxnet3_alloc_intr_resources(adapter); + + vmxnet3_read_mac_addr(adapter, mac); + memcpy(netdev->dev_addr, mac, netdev->addr_len); + + netdev->netdev_ops = &vmxnet3_netdev_ops; + netdev->watchdog_timeo = 5 * HZ; + vmxnet3_set_ethtool_ops(netdev); + + INIT_WORK(&adapter->work, vmxnet3_reset_work); + + netif_napi_add(netdev, &adapter->napi, vmxnet3_poll, 64); + SET_NETDEV_DEV(netdev, &pdev->dev); + err = register_netdev(netdev); + + if (err) { + printk(KERN_ERR "Failed to register adapter %s\n", + pci_name(pdev)); + goto err_register; + } + + set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); + atomic_inc(&devices_found); + return 0; + +err_register: + vmxnet3_free_intr_resources(adapter); +err_ver: + vmxnet3_free_pci_resources(adapter); +err_alloc_pci: + kfree(adapter->pm_conf); +err_alloc_pm: + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc), + adapter->tqd_start, adapter->queue_desc_pa); +err_alloc_queue_desc: + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared), + adapter->shared, adapter->shared_pa); +err_alloc_shared: + pci_set_drvdata(pdev, NULL); + free_netdev(netdev); + return err; +} + + +static void __devexit +vmxnet3_remove_device(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + flush_scheduled_work(); + + unregister_netdev(netdev); + + vmxnet3_free_intr_resources(adapter); + vmxnet3_free_pci_resources(adapter); + kfree(adapter->pm_conf); + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) + + sizeof(struct Vmxnet3_RxQueueDesc), + adapter->tqd_start, adapter->queue_desc_pa); + pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared), + adapter->shared, adapter->shared_pa); + free_netdev(netdev); +} + + +#ifdef CONFIG_PM + +static int +vmxnet3_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct net_device *netdev = pci_get_drvdata(pdev); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_PMConf *pmConf; + struct ethhdr *ehdr; + struct arphdr *ahdr; + u8 *arpreq; + struct in_device *in_dev; + struct in_ifaddr *ifa; + int i = 0; + + if (!netif_running(netdev)) + return 0; + + vmxnet3_disable_all_intrs(adapter); + vmxnet3_free_irqs(adapter); + vmxnet3_free_intr_resources(adapter); + + netif_device_detach(netdev); + netif_stop_queue(netdev); + + /* Create wake-up filters. */ + pmConf = adapter->pm_conf; + memset(pmConf, 0, sizeof(*pmConf)); + + if (adapter->wol & WAKE_UCAST) { + pmConf->filters[i].patternSize = ETH_ALEN; + pmConf->filters[i].maskSize = 1; + memcpy(pmConf->filters[i].pattern, netdev->dev_addr, ETH_ALEN); + pmConf->filters[i].mask[0] = 0x3F; /* LSB ETH_ALEN bits */ + + pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER; + i++; + } + + if (adapter->wol & WAKE_ARP) { + in_dev = in_dev_get(netdev); + if (!in_dev) + goto skip_arp; + + ifa = (struct in_ifaddr *)in_dev->ifa_list; + if (!ifa) + goto skip_arp; + + pmConf->filters[i].patternSize = ETH_HLEN + /* Ethernet header*/ + sizeof(struct arphdr) + /* ARP header */ + 2 * ETH_ALEN + /* 2 Ethernet addresses*/ + 2 * sizeof(u32); /*2 IPv4 addresses */ + pmConf->filters[i].maskSize = + (pmConf->filters[i].patternSize - 1) / 8 + 1; + + /* ETH_P_ARP in Ethernet header. */ + ehdr = (struct ethhdr *)pmConf->filters[i].pattern; + ehdr->h_proto = htons(ETH_P_ARP); + + /* ARPOP_REQUEST in ARP header. */ + ahdr = (struct arphdr *)&pmConf->filters[i].pattern[ETH_HLEN]; + ahdr->ar_op = htons(ARPOP_REQUEST); + arpreq = (u8 *)(ahdr + 1); + + /* The Unicast IPv4 address in 'tip' field. */ + arpreq += 2 * ETH_ALEN + sizeof(u32); + *(u32 *)arpreq = ifa->ifa_address; + + /* The mask for the relevant bits. */ + pmConf->filters[i].mask[0] = 0x00; + pmConf->filters[i].mask[1] = 0x30; /* ETH_P_ARP */ + pmConf->filters[i].mask[2] = 0x30; /* ARPOP_REQUEST */ + pmConf->filters[i].mask[3] = 0x00; + pmConf->filters[i].mask[4] = 0xC0; /* IPv4 TIP */ + pmConf->filters[i].mask[5] = 0x03; /* IPv4 TIP */ + in_dev_put(in_dev); + + pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER; + i++; + } + +skip_arp: + if (adapter->wol & WAKE_MAGIC) + pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_MAGIC; + + pmConf->numFilters = i; + + adapter->shared->devRead.pmConfDesc.confVer = 1; + adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf); + adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_PMCFG); + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, PMSG_SUSPEND), + adapter->wol); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, PMSG_SUSPEND)); + + return 0; +} + + +static int +vmxnet3_resume(struct device *device) +{ + int err; + struct pci_dev *pdev = to_pci_dev(device); + struct net_device *netdev = pci_get_drvdata(pdev); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + struct Vmxnet3_PMConf *pmConf; + + if (!netif_running(netdev)) + return 0; + + /* Destroy wake-up filters. */ + pmConf = adapter->pm_conf; + memset(pmConf, 0, sizeof(*pmConf)); + + adapter->shared->devRead.pmConfDesc.confVer = 1; + adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf); + adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf); + + netif_device_attach(netdev); + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device_mem(pdev); + if (err != 0) + return err; + + pci_enable_wake(pdev, PCI_D0, 0); + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_PMCFG); + vmxnet3_alloc_intr_resources(adapter); + vmxnet3_request_irqs(adapter); + vmxnet3_enable_all_intrs(adapter); + + return 0; +} + +static struct dev_pm_ops vmxnet3_pm_ops = { + .suspend = vmxnet3_suspend, + .resume = vmxnet3_resume, +}; +#endif + +static struct pci_driver vmxnet3_driver = { + .name = vmxnet3_driver_name, + .id_table = vmxnet3_pciid_table, + .probe = vmxnet3_probe_device, + .remove = __devexit_p(vmxnet3_remove_device), +#ifdef CONFIG_PM + .driver.pm = &vmxnet3_pm_ops, +#endif +}; + + +static int __init +vmxnet3_init_module(void) +{ + printk(KERN_INFO "%s - version %s\n", VMXNET3_DRIVER_DESC, + VMXNET3_DRIVER_VERSION_REPORT); + return pci_register_driver(&vmxnet3_driver); +} + +module_init(vmxnet3_init_module); + + +static void +vmxnet3_exit_module(void) +{ + pci_unregister_driver(&vmxnet3_driver); +} + +module_exit(vmxnet3_exit_module); + +MODULE_AUTHOR("VMware, Inc."); +MODULE_DESCRIPTION(VMXNET3_DRIVER_DESC); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(VMXNET3_DRIVER_VERSION_STRING); diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c new file mode 100644 index 00000000000..c2c15e4cafc --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -0,0 +1,566 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + + +#include "vmxnet3_int.h" + +struct vmxnet3_stat_desc { + char desc[ETH_GSTRING_LEN]; + int offset; +}; + + +static u32 +vmxnet3_get_rx_csum(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + return adapter->rxcsum; +} + + +static int +vmxnet3_set_rx_csum(struct net_device *netdev, u32 val) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + if (adapter->rxcsum != val) { + adapter->rxcsum = val; + if (netif_running(netdev)) { + if (val) + adapter->shared->devRead.misc.uptFeatures |= + UPT1_F_RXCSUM; + else + adapter->shared->devRead.misc.uptFeatures &= + ~UPT1_F_RXCSUM; + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + } + } + return 0; +} + + +/* per tq stats maintained by the device */ +static const struct vmxnet3_stat_desc +vmxnet3_tq_dev_stats[] = { + /* description, offset */ + { "TSO pkts tx", offsetof(struct UPT1_TxStats, TSOPktsTxOK) }, + { "TSO bytes tx", offsetof(struct UPT1_TxStats, TSOBytesTxOK) }, + { "ucast pkts tx", offsetof(struct UPT1_TxStats, ucastPktsTxOK) }, + { "ucast bytes tx", offsetof(struct UPT1_TxStats, ucastBytesTxOK) }, + { "mcast pkts tx", offsetof(struct UPT1_TxStats, mcastPktsTxOK) }, + { "mcast bytes tx", offsetof(struct UPT1_TxStats, mcastBytesTxOK) }, + { "bcast pkts tx", offsetof(struct UPT1_TxStats, bcastPktsTxOK) }, + { "bcast bytes tx", offsetof(struct UPT1_TxStats, bcastBytesTxOK) }, + { "pkts tx err", offsetof(struct UPT1_TxStats, pktsTxError) }, + { "pkts tx discard", offsetof(struct UPT1_TxStats, pktsTxDiscard) }, +}; + +/* per tq stats maintained by the driver */ +static const struct vmxnet3_stat_desc +vmxnet3_tq_driver_stats[] = { + /* description, offset */ + {"drv dropped tx total", offsetof(struct vmxnet3_tq_driver_stats, + drop_total) }, + { " too many frags", offsetof(struct vmxnet3_tq_driver_stats, + drop_too_many_frags) }, + { " giant hdr", offsetof(struct vmxnet3_tq_driver_stats, + drop_oversized_hdr) }, + { " hdr err", offsetof(struct vmxnet3_tq_driver_stats, + drop_hdr_inspect_err) }, + { " tso", offsetof(struct vmxnet3_tq_driver_stats, + drop_tso) }, + { "ring full", offsetof(struct vmxnet3_tq_driver_stats, + tx_ring_full) }, + { "pkts linearized", offsetof(struct vmxnet3_tq_driver_stats, + linearized) }, + { "hdr cloned", offsetof(struct vmxnet3_tq_driver_stats, + copy_skb_header) }, + { "giant hdr", offsetof(struct vmxnet3_tq_driver_stats, + oversized_hdr) }, +}; + +/* per rq stats maintained by the device */ +static const struct vmxnet3_stat_desc +vmxnet3_rq_dev_stats[] = { + { "LRO pkts rx", offsetof(struct UPT1_RxStats, LROPktsRxOK) }, + { "LRO byte rx", offsetof(struct UPT1_RxStats, LROBytesRxOK) }, + { "ucast pkts rx", offsetof(struct UPT1_RxStats, ucastPktsRxOK) }, + { "ucast bytes rx", offsetof(struct UPT1_RxStats, ucastBytesRxOK) }, + { "mcast pkts rx", offsetof(struct UPT1_RxStats, mcastPktsRxOK) }, + { "mcast bytes rx", offsetof(struct UPT1_RxStats, mcastBytesRxOK) }, + { "bcast pkts rx", offsetof(struct UPT1_RxStats, bcastPktsRxOK) }, + { "bcast bytes rx", offsetof(struct UPT1_RxStats, bcastBytesRxOK) }, + { "pkts rx out of buf", offsetof(struct UPT1_RxStats, pktsRxOutOfBuf) }, + { "pkts rx err", offsetof(struct UPT1_RxStats, pktsRxError) }, +}; + +/* per rq stats maintained by the driver */ +static const struct vmxnet3_stat_desc +vmxnet3_rq_driver_stats[] = { + /* description, offset */ + { "drv dropped rx total", offsetof(struct vmxnet3_rq_driver_stats, + drop_total) }, + { " err", offsetof(struct vmxnet3_rq_driver_stats, + drop_err) }, + { " fcs", offsetof(struct vmxnet3_rq_driver_stats, + drop_fcs) }, + { "rx buf alloc fail", offsetof(struct vmxnet3_rq_driver_stats, + rx_buf_alloc_failure) }, +}; + +/* gloabl stats maintained by the driver */ +static const struct vmxnet3_stat_desc +vmxnet3_global_stats[] = { + /* description, offset */ + { "tx timeout count", offsetof(struct vmxnet3_adapter, + tx_timeout_count) } +}; + + +struct net_device_stats * +vmxnet3_get_stats(struct net_device *netdev) +{ + struct vmxnet3_adapter *adapter; + struct vmxnet3_tq_driver_stats *drvTxStats; + struct vmxnet3_rq_driver_stats *drvRxStats; + struct UPT1_TxStats *devTxStats; + struct UPT1_RxStats *devRxStats; + struct net_device_stats *net_stats = &netdev->stats; + + adapter = netdev_priv(netdev); + + /* Collect the dev stats into the shared area */ + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); + + /* Assuming that we have a single queue device */ + devTxStats = &adapter->tqd_start->stats; + devRxStats = &adapter->rqd_start->stats; + + /* Get access to the driver stats per queue */ + drvTxStats = &adapter->tx_queue.stats; + drvRxStats = &adapter->rx_queue.stats; + + memset(net_stats, 0, sizeof(*net_stats)); + + net_stats->rx_packets = devRxStats->ucastPktsRxOK + + devRxStats->mcastPktsRxOK + + devRxStats->bcastPktsRxOK; + + net_stats->tx_packets = devTxStats->ucastPktsTxOK + + devTxStats->mcastPktsTxOK + + devTxStats->bcastPktsTxOK; + + net_stats->rx_bytes = devRxStats->ucastBytesRxOK + + devRxStats->mcastBytesRxOK + + devRxStats->bcastBytesRxOK; + + net_stats->tx_bytes = devTxStats->ucastBytesTxOK + + devTxStats->mcastBytesTxOK + + devTxStats->bcastBytesTxOK; + + net_stats->rx_errors = devRxStats->pktsRxError; + net_stats->tx_errors = devTxStats->pktsTxError; + net_stats->rx_dropped = drvRxStats->drop_total; + net_stats->tx_dropped = drvTxStats->drop_total; + net_stats->multicast = devRxStats->mcastPktsRxOK; + + return net_stats; +} + +static int +vmxnet3_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(vmxnet3_tq_dev_stats) + + ARRAY_SIZE(vmxnet3_tq_driver_stats) + + ARRAY_SIZE(vmxnet3_rq_dev_stats) + + ARRAY_SIZE(vmxnet3_rq_driver_stats) + + ARRAY_SIZE(vmxnet3_global_stats); + default: + return -EOPNOTSUPP; + } +} + + +static int +vmxnet3_get_regs_len(struct net_device *netdev) +{ + return 20 * sizeof(u32); +} + + +static void +vmxnet3_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + strlcpy(drvinfo->driver, vmxnet3_driver_name, sizeof(drvinfo->driver)); + drvinfo->driver[sizeof(drvinfo->driver) - 1] = '\0'; + + strlcpy(drvinfo->version, VMXNET3_DRIVER_VERSION_REPORT, + sizeof(drvinfo->version)); + drvinfo->driver[sizeof(drvinfo->version) - 1] = '\0'; + + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + drvinfo->fw_version[sizeof(drvinfo->fw_version) - 1] = '\0'; + + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + ETHTOOL_BUSINFO_LEN); + drvinfo->n_stats = vmxnet3_get_sset_count(netdev, ETH_SS_STATS); + drvinfo->testinfo_len = 0; + drvinfo->eedump_len = 0; + drvinfo->regdump_len = vmxnet3_get_regs_len(netdev); +} + + +static void +vmxnet3_get_strings(struct net_device *netdev, u32 stringset, u8 *buf) +{ + if (stringset == ETH_SS_STATS) { + int i; + + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) { + memcpy(buf, vmxnet3_tq_dev_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) { + memcpy(buf, vmxnet3_tq_driver_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) { + memcpy(buf, vmxnet3_rq_dev_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) { + memcpy(buf, vmxnet3_rq_driver_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) { + memcpy(buf, vmxnet3_global_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + } +} + +static u32 +vmxnet3_get_flags(struct net_device *netdev) { + return netdev->features; +} + +static int +vmxnet3_set_flags(struct net_device *netdev, u32 data) { + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1; + u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1; + + if (lro_requested ^ lro_present) { + /* toggle the LRO feature*/ + netdev->features ^= NETIF_F_LRO; + + /* update harware LRO capability accordingly */ + if (lro_requested) + adapter->shared->devRead.misc.uptFeatures &= UPT1_F_LRO; + else + adapter->shared->devRead.misc.uptFeatures &= + ~UPT1_F_LRO; + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_FEATURE); + } + return 0; +} + +static void +vmxnet3_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *buf) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u8 *base; + int i; + + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); + + /* this does assume each counter is 64-bit wide */ + + base = (u8 *)&adapter->tqd_start->stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_tq_dev_stats[i].offset); + + base = (u8 *)&adapter->tx_queue.stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_tq_driver_stats[i].offset); + + base = (u8 *)&adapter->rqd_start->stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_rq_dev_stats[i].offset); + + base = (u8 *)&adapter->rx_queue.stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_rq_driver_stats[i].offset); + + base = (u8 *)adapter; + for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) + *buf++ = *(u64 *)(base + vmxnet3_global_stats[i].offset); +} + + +static void +vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 *buf = p; + + memset(p, 0, vmxnet3_get_regs_len(netdev)); + + regs->version = 1; + + /* Update vmxnet3_get_regs_len if we want to dump more registers */ + + /* make each ring use multiple of 16 bytes */ + buf[0] = adapter->tx_queue.tx_ring.next2fill; + buf[1] = adapter->tx_queue.tx_ring.next2comp; + buf[2] = adapter->tx_queue.tx_ring.gen; + buf[3] = 0; + + buf[4] = adapter->tx_queue.comp_ring.next2proc; + buf[5] = adapter->tx_queue.comp_ring.gen; + buf[6] = adapter->tx_queue.stopped; + buf[7] = 0; + + buf[8] = adapter->rx_queue.rx_ring[0].next2fill; + buf[9] = adapter->rx_queue.rx_ring[0].next2comp; + buf[10] = adapter->rx_queue.rx_ring[0].gen; + buf[11] = 0; + + buf[12] = adapter->rx_queue.rx_ring[1].next2fill; + buf[13] = adapter->rx_queue.rx_ring[1].next2comp; + buf[14] = adapter->rx_queue.rx_ring[1].gen; + buf[15] = 0; + + buf[16] = adapter->rx_queue.comp_ring.next2proc; + buf[17] = adapter->rx_queue.comp_ring.gen; + buf[18] = 0; + buf[19] = 0; +} + + +static void +vmxnet3_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_ARP | WAKE_MAGIC; + wol->wolopts = adapter->wol; +} + + +static int +vmxnet3_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_MCAST | WAKE_BCAST | + WAKE_MAGICSECURE)) { + return -EOPNOTSUPP; + } + + adapter->wol = wol->wolopts; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + + +static int +vmxnet3_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + ecmd->supported = SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full | + SUPPORTED_TP; + ecmd->advertising = ADVERTISED_TP; + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + + if (adapter->link_speed) { + ecmd->speed = adapter->link_speed; + ecmd->duplex = DUPLEX_FULL; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + return 0; +} + + +static void +vmxnet3_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *param) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + + param->rx_max_pending = VMXNET3_RX_RING_MAX_SIZE; + param->tx_max_pending = VMXNET3_TX_RING_MAX_SIZE; + param->rx_mini_max_pending = 0; + param->rx_jumbo_max_pending = 0; + + param->rx_pending = adapter->rx_queue.rx_ring[0].size; + param->tx_pending = adapter->tx_queue.tx_ring.size; + param->rx_mini_pending = 0; + param->rx_jumbo_pending = 0; +} + + +static int +vmxnet3_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *param) +{ + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + u32 new_tx_ring_size, new_rx_ring_size; + u32 sz; + int err = 0; + + if (param->tx_pending == 0 || param->tx_pending > + VMXNET3_TX_RING_MAX_SIZE) + return -EINVAL; + + if (param->rx_pending == 0 || param->rx_pending > + VMXNET3_RX_RING_MAX_SIZE) + return -EINVAL; + + + /* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */ + new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) & + ~VMXNET3_RING_SIZE_MASK; + new_tx_ring_size = min_t(u32, new_tx_ring_size, + VMXNET3_TX_RING_MAX_SIZE); + if (new_tx_ring_size > VMXNET3_TX_RING_MAX_SIZE || (new_tx_ring_size % + VMXNET3_RING_SIZE_ALIGN) != 0) + return -EINVAL; + + /* ring0 has to be a multiple of + * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN + */ + sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN; + new_rx_ring_size = (param->rx_pending + sz - 1) / sz * sz; + new_rx_ring_size = min_t(u32, new_rx_ring_size, + VMXNET3_RX_RING_MAX_SIZE / sz * sz); + if (new_rx_ring_size > VMXNET3_RX_RING_MAX_SIZE || (new_rx_ring_size % + sz) != 0) + return -EINVAL; + + if (new_tx_ring_size == adapter->tx_queue.tx_ring.size && + new_rx_ring_size == adapter->rx_queue.rx_ring[0].size) { + return 0; + } + + /* + * Reset_work may be in the middle of resetting the device, wait for its + * completion. + */ + while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(netdev)) { + vmxnet3_quiesce_dev(adapter); + vmxnet3_reset_dev(adapter); + + /* recreate the rx queue and the tx queue based on the + * new sizes */ + vmxnet3_tq_destroy(&adapter->tx_queue, adapter); + vmxnet3_rq_destroy(&adapter->rx_queue, adapter); + + err = vmxnet3_create_queues(adapter, new_tx_ring_size, + new_rx_ring_size, VMXNET3_DEF_RX_RING_SIZE); + if (err) { + /* failed, most likely because of OOM, try default + * size */ + printk(KERN_ERR "%s: failed to apply new sizes, try the" + " default ones\n", netdev->name); + err = vmxnet3_create_queues(adapter, + VMXNET3_DEF_TX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE, + VMXNET3_DEF_RX_RING_SIZE); + if (err) { + printk(KERN_ERR "%s: failed to create queues " + "with default sizes. Closing it\n", + netdev->name); + goto out; + } + } + + err = vmxnet3_activate_dev(adapter); + if (err) + printk(KERN_ERR "%s: failed to re-activate, error %d." + " Closing it\n", netdev->name, err); + } + +out: + clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state); + if (err) + vmxnet3_force_close(adapter); + + return err; +} + + +static struct ethtool_ops vmxnet3_ethtool_ops = { + .get_settings = vmxnet3_get_settings, + .get_drvinfo = vmxnet3_get_drvinfo, + .get_regs_len = vmxnet3_get_regs_len, + .get_regs = vmxnet3_get_regs, + .get_wol = vmxnet3_get_wol, + .set_wol = vmxnet3_set_wol, + .get_link = ethtool_op_get_link, + .get_rx_csum = vmxnet3_get_rx_csum, + .set_rx_csum = vmxnet3_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_strings = vmxnet3_get_strings, + .get_flags = vmxnet3_get_flags, + .set_flags = vmxnet3_set_flags, + .get_sset_count = vmxnet3_get_sset_count, + .get_ethtool_stats = vmxnet3_get_ethtool_stats, + .get_ringparam = vmxnet3_get_ringparam, + .set_ringparam = vmxnet3_set_ringparam, +}; + +void vmxnet3_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &vmxnet3_ethtool_ops); +} diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h new file mode 100644 index 00000000000..3c0d70d5811 --- /dev/null +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -0,0 +1,389 @@ +/* + * Linux driver for VMware's vmxnet3 ethernet NIC. + * + * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com> + * + */ + +#ifndef _VMXNET3_INT_H +#define _VMXNET3_INT_H + +#include <linux/types.h> +#include <linux/ethtool.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <linux/ethtool.h> +#include <linux/compiler.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/ioport.h> +#include <linux/highmem.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/skbuff.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/uaccess.h> +#include <asm/dma.h> +#include <asm/page.h> + +#include <linux/tcp.h> +#include <linux/udp.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/in.h> +#include <linux/etherdevice.h> +#include <asm/checksum.h> +#include <linux/if_vlan.h> +#include <linux/if_arp.h> +#include <linux/inetdevice.h> + +#include "vmxnet3_defs.h" + +#ifdef DEBUG +# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI(debug)" +#else +# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI" +#endif + + +/* + * Version numbers + */ +#define VMXNET3_DRIVER_VERSION_STRING "1.0.5.0-k" + +/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ +#define VMXNET3_DRIVER_VERSION_NUM 0x01000500 + + +/* + * Capabilities + */ + +enum { + VMNET_CAP_SG = 0x0001, /* Can do scatter-gather transmits. */ + VMNET_CAP_IP4_CSUM = 0x0002, /* Can checksum only TCP/UDP over + * IPv4 */ + VMNET_CAP_HW_CSUM = 0x0004, /* Can checksum all packets. */ + VMNET_CAP_HIGH_DMA = 0x0008, /* Can DMA to high memory. */ + VMNET_CAP_TOE = 0x0010, /* Supports TCP/IP offload. */ + VMNET_CAP_TSO = 0x0020, /* Supports TCP Segmentation + * offload */ + VMNET_CAP_SW_TSO = 0x0040, /* Supports SW TCP Segmentation */ + VMNET_CAP_VMXNET_APROM = 0x0080, /* Vmxnet APROM support */ + VMNET_CAP_HW_TX_VLAN = 0x0100, /* Can we do VLAN tagging in HW */ + VMNET_CAP_HW_RX_VLAN = 0x0200, /* Can we do VLAN untagging in HW */ + VMNET_CAP_SW_VLAN = 0x0400, /* VLAN tagging/untagging in SW */ + VMNET_CAP_WAKE_PCKT_RCV = 0x0800, /* Can wake on network packet recv? */ + VMNET_CAP_ENABLE_INT_INLINE = 0x1000, /* Enable Interrupt Inline */ + VMNET_CAP_ENABLE_HEADER_COPY = 0x2000, /* copy header for vmkernel */ + VMNET_CAP_TX_CHAIN = 0x4000, /* Guest can use multiple tx entries + * for a pkt */ + VMNET_CAP_RX_CHAIN = 0x8000, /* pkt can span multiple rx entries */ + VMNET_CAP_LPD = 0x10000, /* large pkt delivery */ + VMNET_CAP_BPF = 0x20000, /* BPF Support in VMXNET Virtual HW*/ + VMNET_CAP_SG_SPAN_PAGES = 0x40000, /* Scatter-gather can span multiple*/ + /* pages transmits */ + VMNET_CAP_IP6_CSUM = 0x80000, /* Can do IPv6 csum offload. */ + VMNET_CAP_TSO6 = 0x100000, /* TSO seg. offload for IPv6 pkts. */ + VMNET_CAP_TSO256k = 0x200000, /* Can do TSO seg offload for */ + /* pkts up to 256kB. */ + VMNET_CAP_UPT = 0x400000 /* Support UPT */ +}; + +/* + * PCI vendor and device IDs. + */ +#define PCI_VENDOR_ID_VMWARE 0x15AD +#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07B0 +#define MAX_ETHERNET_CARDS 10 +#define MAX_PCI_PASSTHRU_DEVICE 6 + +struct vmxnet3_cmd_ring { + union Vmxnet3_GenericDesc *base; + u32 size; + u32 next2fill; + u32 next2comp; + u8 gen; + dma_addr_t basePA; +}; + +static inline void +vmxnet3_cmd_ring_adv_next2fill(struct vmxnet3_cmd_ring *ring) +{ + ring->next2fill++; + if (unlikely(ring->next2fill == ring->size)) { + ring->next2fill = 0; + VMXNET3_FLIP_RING_GEN(ring->gen); + } +} + +static inline void +vmxnet3_cmd_ring_adv_next2comp(struct vmxnet3_cmd_ring *ring) +{ + VMXNET3_INC_RING_IDX_ONLY(ring->next2comp, ring->size); +} + +static inline int +vmxnet3_cmd_ring_desc_avail(struct vmxnet3_cmd_ring *ring) +{ + return (ring->next2comp > ring->next2fill ? 0 : ring->size) + + ring->next2comp - ring->next2fill - 1; +} + +struct vmxnet3_comp_ring { + union Vmxnet3_GenericDesc *base; + u32 size; + u32 next2proc; + u8 gen; + u8 intr_idx; + dma_addr_t basePA; +}; + +static inline void +vmxnet3_comp_ring_adv_next2proc(struct vmxnet3_comp_ring *ring) +{ + ring->next2proc++; + if (unlikely(ring->next2proc == ring->size)) { + ring->next2proc = 0; + VMXNET3_FLIP_RING_GEN(ring->gen); + } +} + +struct vmxnet3_tx_data_ring { + struct Vmxnet3_TxDataDesc *base; + u32 size; + dma_addr_t basePA; +}; + +enum vmxnet3_buf_map_type { + VMXNET3_MAP_INVALID = 0, + VMXNET3_MAP_NONE, + VMXNET3_MAP_SINGLE, + VMXNET3_MAP_PAGE, +}; + +struct vmxnet3_tx_buf_info { + u32 map_type; + u16 len; + u16 sop_idx; + dma_addr_t dma_addr; + struct sk_buff *skb; +}; + +struct vmxnet3_tq_driver_stats { + u64 drop_total; /* # of pkts dropped by the driver, the + * counters below track droppings due to + * different reasons + */ + u64 drop_too_many_frags; + u64 drop_oversized_hdr; + u64 drop_hdr_inspect_err; + u64 drop_tso; + + u64 tx_ring_full; + u64 linearized; /* # of pkts linearized */ + u64 copy_skb_header; /* # of times we have to copy skb header */ + u64 oversized_hdr; +}; + +struct vmxnet3_tx_ctx { + bool ipv4; + u16 mss; + u32 eth_ip_hdr_size; /* only valid for pkts requesting tso or csum + * offloading + */ + u32 l4_hdr_size; /* only valid if mss != 0 */ + u32 copy_size; /* # of bytes copied into the data ring */ + union Vmxnet3_GenericDesc *sop_txd; + union Vmxnet3_GenericDesc *eop_txd; +}; + +struct vmxnet3_tx_queue { + spinlock_t tx_lock; + struct vmxnet3_cmd_ring tx_ring; + struct vmxnet3_tx_buf_info *buf_info; + struct vmxnet3_tx_data_ring data_ring; + struct vmxnet3_comp_ring comp_ring; + struct Vmxnet3_TxQueueCtrl *shared; + struct vmxnet3_tq_driver_stats stats; + bool stopped; + int num_stop; /* # of times the queue is + * stopped */ +} __attribute__((__aligned__(SMP_CACHE_BYTES))); + +enum vmxnet3_rx_buf_type { + VMXNET3_RX_BUF_NONE = 0, + VMXNET3_RX_BUF_SKB = 1, + VMXNET3_RX_BUF_PAGE = 2 +}; + +struct vmxnet3_rx_buf_info { + enum vmxnet3_rx_buf_type buf_type; + u16 len; + union { + struct sk_buff *skb; + struct page *page; + }; + dma_addr_t dma_addr; +}; + +struct vmxnet3_rx_ctx { + struct sk_buff *skb; + u32 sop_idx; +}; + +struct vmxnet3_rq_driver_stats { + u64 drop_total; + u64 drop_err; + u64 drop_fcs; + u64 rx_buf_alloc_failure; +}; + +struct vmxnet3_rx_queue { + struct vmxnet3_cmd_ring rx_ring[2]; + struct vmxnet3_comp_ring comp_ring; + struct vmxnet3_rx_ctx rx_ctx; + u32 qid; /* rqID in RCD for buffer from 1st ring */ + u32 qid2; /* rqID in RCD for buffer from 2nd ring */ + u32 uncommitted[2]; /* # of buffers allocated since last RXPROD + * update */ + struct vmxnet3_rx_buf_info *buf_info[2]; + struct Vmxnet3_RxQueueCtrl *shared; + struct vmxnet3_rq_driver_stats stats; +} __attribute__((__aligned__(SMP_CACHE_BYTES))); + +#define VMXNET3_LINUX_MAX_MSIX_VECT 1 + +struct vmxnet3_intr { + enum vmxnet3_intr_mask_mode mask_mode; + enum vmxnet3_intr_type type; /* MSI-X, MSI, or INTx? */ + u8 num_intrs; /* # of intr vectors */ + u8 event_intr_idx; /* idx of the intr vector for event */ + u8 mod_levels[VMXNET3_LINUX_MAX_MSIX_VECT]; /* moderation level */ +#ifdef CONFIG_PCI_MSI + struct msix_entry msix_entries[VMXNET3_LINUX_MAX_MSIX_VECT]; +#endif +}; + +#define VMXNET3_STATE_BIT_RESETTING 0 +#define VMXNET3_STATE_BIT_QUIESCED 1 +struct vmxnet3_adapter { + struct vmxnet3_tx_queue tx_queue; + struct vmxnet3_rx_queue rx_queue; + struct napi_struct napi; + struct vlan_group *vlan_grp; + + struct vmxnet3_intr intr; + + struct Vmxnet3_DriverShared *shared; + struct Vmxnet3_PMConf *pm_conf; + struct Vmxnet3_TxQueueDesc *tqd_start; /* first tx queue desc */ + struct Vmxnet3_RxQueueDesc *rqd_start; /* first rx queue desc */ + struct net_device *netdev; + struct pci_dev *pdev; + + u8 *hw_addr0; /* for BAR 0 */ + u8 *hw_addr1; /* for BAR 1 */ + + /* feature control */ + bool rxcsum; + bool lro; + bool jumbo_frame; + + /* rx buffer related */ + unsigned skb_buf_size; + int rx_buf_per_pkt; /* only apply to the 1st ring */ + dma_addr_t shared_pa; + dma_addr_t queue_desc_pa; + + /* Wake-on-LAN */ + u32 wol; + + /* Link speed */ + u32 link_speed; /* in mbps */ + + u64 tx_timeout_count; + struct work_struct work; + + unsigned long state; /* VMXNET3_STATE_BIT_xxx */ + + int dev_number; +}; + +#define VMXNET3_WRITE_BAR0_REG(adapter, reg, val) \ + writel((val), (adapter)->hw_addr0 + (reg)) +#define VMXNET3_READ_BAR0_REG(adapter, reg) \ + readl((adapter)->hw_addr0 + (reg)) + +#define VMXNET3_WRITE_BAR1_REG(adapter, reg, val) \ + writel((val), (adapter)->hw_addr1 + (reg)) +#define VMXNET3_READ_BAR1_REG(adapter, reg) \ + readl((adapter)->hw_addr1 + (reg)) + +#define VMXNET3_WAKE_QUEUE_THRESHOLD(tq) (5) +#define VMXNET3_RX_ALLOC_THRESHOLD(rq, ring_idx, adapter) \ + ((rq)->rx_ring[ring_idx].size >> 3) + +#define VMXNET3_GET_ADDR_LO(dma) ((u32)(dma)) +#define VMXNET3_GET_ADDR_HI(dma) ((u32)(((u64)(dma)) >> 32)) + +/* must be a multiple of VMXNET3_RING_SIZE_ALIGN */ +#define VMXNET3_DEF_TX_RING_SIZE 512 +#define VMXNET3_DEF_RX_RING_SIZE 256 + +#define VMXNET3_MAX_ETH_HDR_SIZE 22 +#define VMXNET3_MAX_SKB_BUF_SIZE (3*1024) + +int +vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter); + +int +vmxnet3_activate_dev(struct vmxnet3_adapter *adapter); + +void +vmxnet3_force_close(struct vmxnet3_adapter *adapter); + +void +vmxnet3_reset_dev(struct vmxnet3_adapter *adapter); + +void +vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq, + struct vmxnet3_adapter *adapter); + +void +vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq, + struct vmxnet3_adapter *adapter); + +int +vmxnet3_create_queues(struct vmxnet3_adapter *adapter, + u32 tx_ring_size, u32 rx_ring_size, u32 rx_ring2_size); + +extern void vmxnet3_set_ethtool_ops(struct net_device *netdev); +extern struct net_device_stats *vmxnet3_get_stats(struct net_device *netdev); + +extern char vmxnet3_driver_name[]; +#endif diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 9693b0fd323..0bd898c9475 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/string.h> diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 66360a2a14c..8e25ca7080c 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -76,6 +76,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/poll.h> #include <linux/fs.h> @@ -906,6 +907,7 @@ static ssize_t cosa_write(struct file *file, current->state = TASK_RUNNING; chan->tx_status = 1; spin_unlock_irqrestore(&cosa->lock, flags); + up(&chan->wsem); return -ERESTARTSYS; } } diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c index 2573c18b6aa..cd8cb95c5bd 100644 --- a/drivers/net/wan/cycx_x25.c +++ b/drivers/net/wan/cycx_x25.c @@ -84,6 +84,7 @@ #include <linux/kernel.h> /* printk(), and other useful stuff */ #include <linux/module.h> #include <linux/string.h> /* inline memset(), etc. */ +#include <linux/sched.h> #include <linux/slab.h> /* kmalloc(), kfree() */ #include <linux/stddef.h> /* offsetof(), etc. */ #include <linux/wanrouter.h> /* WAN router definitions */ diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 81c8aec9df9..07d00b4cf48 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -81,6 +81,7 @@ */ #include <linux/module.h> +#include <linux/sched.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/list.h> diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 3e90eb81618..beda387f2fc 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/version.h> #include <linux/pci.h> +#include <linux/sched.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/if.h> diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index cf5fd17ad70..f1bff98acd1 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -58,8 +58,7 @@ struct cisco_state { spinlock_t lock; unsigned long last_poll; int up; - int request_sent; - u32 txseq; /* TX sequence number */ + u32 txseq; /* TX sequence number, 0 = none */ u32 rxseq; /* RX sequence number */ }; @@ -163,6 +162,7 @@ static int cisco_rx(struct sk_buff *skb) struct cisco_packet *cisco_data; struct in_device *in_dev; __be32 addr, mask; + u32 ack; if (skb->len < sizeof(struct hdlc_header)) goto rx_error; @@ -223,8 +223,10 @@ static int cisco_rx(struct sk_buff *skb) case CISCO_KEEPALIVE_REQ: spin_lock(&st->lock); st->rxseq = ntohl(cisco_data->par1); - if (st->request_sent && - ntohl(cisco_data->par2) == st->txseq) { + ack = ntohl(cisco_data->par2); + if (ack && (ack == st->txseq || + /* our current REQ may be in transit */ + ack == st->txseq - 1)) { st->last_poll = jiffies; if (!st->up) { u32 sec, min, hrs, days; @@ -275,7 +277,6 @@ static void cisco_timer(unsigned long arg) cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq), htonl(st->rxseq)); - st->request_sent = 1; spin_unlock(&st->lock); st->timer.expires = jiffies + st->settings.interval * HZ; @@ -293,9 +294,7 @@ static void cisco_start(struct net_device *dev) unsigned long flags; spin_lock_irqsave(&st->lock, flags); - st->up = 0; - st->request_sent = 0; - st->txseq = st->rxseq = 0; + st->up = st->txseq = st->rxseq = 0; spin_unlock_irqrestore(&st->lock, flags); init_timer(&st->timer); @@ -317,8 +316,7 @@ static void cisco_stop(struct net_device *dev) spin_lock_irqsave(&st->lock, flags); netif_dormant_on(dev); - st->up = 0; - st->request_sent = 0; + st->up = st->txseq = 0; spin_unlock_irqrestore(&st->lock, flags); } diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c index 83da596e205..58c66819f39 100644 --- a/drivers/net/wan/n2.c +++ b/drivers/net/wan/n2.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index a52f29c72c3..f1340faaf02 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 49ea9c92b7e..d7a764a2fc1 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -31,13 +31,12 @@ config STRIP ---help--- Say Y if you have a Metricom radio and intend to use Starmode Radio IP. STRIP is a radio protocol developed for the MosquitoNet project - (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet - traffic using Metricom radios. Metricom radios are small, battery - powered, 100kbit/sec packet radio transceivers, about the size and - weight of a cellular telephone. (You may also have heard them called - "Metricom modems" but we avoid the term "modem" because it misleads - many people into thinking that you can plug a Metricom modem into a - phone line and use it as a modem.) + to send Internet traffic using Metricom radios. Metricom radios are + small, battery powered, 100kbit/sec packet radio transceivers, about + the size and weight of a cellular telephone. (You may also have heard + them called "Metricom modems" but we avoid the term "modem" because + it misleads many people into thinking that you can plug a Metricom + modem into a phone line and use it as a modem.) You can use STRIP on any Linux machine with a serial port, although it is obviously most useful for people with laptop computers. If you diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h index 4f6ab132218..b07e4d3a6b4 100644 --- a/drivers/net/wireless/adm8211.h +++ b/drivers/net/wireless/adm8211.h @@ -266,7 +266,7 @@ do { \ #define ADM8211_SYNCTL_CS1 (1 << 28) #define ADM8211_SYNCTL_CAL (1 << 27) #define ADM8211_SYNCTL_SELCAL (1 << 26) -#define ADM8211_SYNCTL_RFtype ((1 << 24) || (1 << 23) || (1 << 22)) +#define ADM8211_SYNCTL_RFtype ((1 << 24) | (1 << 23) | (1 << 22)) #define ADM8211_SYNCTL_RFMD (1 << 22) #define ADM8211_SYNCTL_GENERAL (0x7 << 22) /* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */ diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 7116a1aa20c..abf896a7390 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -4790,9 +4790,8 @@ static int proc_stats_rid_open( struct inode *inode, static int get_dec_u16( char *buffer, int *start, int limit ) { u16 value; int valid = 0; - for( value = 0; buffer[*start] >= '0' && - buffer[*start] <= '9' && - *start < limit; (*start)++ ) { + for (value = 0; *start < limit && buffer[*start] >= '0' && + buffer[*start] <= '9'; (*start)++) { valid = 1; value *= 10; value += buffer[*start] - '0'; diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index b3e5cf3735b..dbd488da18b 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -1141,7 +1141,8 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, u8 vpds[2][AR5416_PD_GAIN_ICEPTS]; u8 pwrs[2][AR5416_PD_GAIN_ICEPTS]; int chain, idx, i; - u8 f; + u32 phy_data = 0; + u8 f, tmp; switch (channel->band) { case IEEE80211_BAND_2GHZ: @@ -1208,9 +1209,6 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, } for (i = 0; i < 76; i++) { - u32 phy_data; - u8 tmp; - if (i < 25) { tmp = ar9170_interpolate_val(i, &pwrs[0][0], &vpds[0][0]); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 9c6ab5378f6..95a8e232b58 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1125,7 +1125,6 @@ ath5k_mode_setup(struct ath5k_softc *sc) /* configure operational mode */ ath5k_hw_set_opmode(ah); - ath5k_hw_set_mcast_filter(ah, 0, 0); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index b767c3b67b2..b548c8eaaae 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -63,12 +63,16 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, /* E-machines E510 (tuliom@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) }, + /* BenQ Joybook R55v (nowymarluk@wp.pl) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) }, /* Acer Extensa 5620z (nekoreeve@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */ { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) }, /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */ { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) }, + /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) }, /* HP Compaq C700 (nitrousnrg@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) }, /* IBM-specific AR5212 (all others) */ diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 52bed89063d..43d2be9867f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1555,6 +1555,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MESH_POINT); + hw->wiphy->ps_default = false; + hw->queues = 4; hw->max_rates = 4; hw->channel_change_time = 5000; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 16a271787b8..1895d63aad0 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc, return rate; if (rate_table->info[rate].valid_single_stream && - !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)); + !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) return rate; /* This should not happen */ diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fa1549a03c7..660716214d4 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -607,82 +607,7 @@ struct b43_qos_params { struct ieee80211_tx_queue_params p; }; -struct b43_wldev; - -/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ -struct b43_wl { - /* Pointer to the active wireless device on this chip */ - struct b43_wldev *current_dev; - /* Pointer to the ieee80211 hardware data structure */ - struct ieee80211_hw *hw; - - /* Global driver mutex. Every operation must run with this mutex locked. */ - struct mutex mutex; - /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ - * handler, only. This basically is just the IRQ mask register. */ - spinlock_t hardirq_lock; - - /* The number of queues that were registered with the mac80211 subsystem - * initially. This is a backup copy of hw->queues in case hw->queues has - * to be dynamically lowered at runtime (Firmware does not support QoS). - * hw->queues has to be restored to the original value before unregistering - * from the mac80211 subsystem. */ - u16 mac80211_initially_registered_queues; - - /* We can only have one operating interface (802.11 core) - * at a time. General information about this interface follows. - */ - - struct ieee80211_vif *vif; - /* The MAC address of the operating interface. */ - u8 mac_addr[ETH_ALEN]; - /* Current BSSID */ - u8 bssid[ETH_ALEN]; - /* Interface type. (NL80211_IFTYPE_XXX) */ - int if_type; - /* Is the card operating in AP, STA or IBSS mode? */ - bool operating; - /* filter flags */ - unsigned int filter_flags; - /* Stats about the wireless interface */ - struct ieee80211_low_level_stats ieee_stats; - -#ifdef CONFIG_B43_HWRNG - struct hwrng rng; - bool rng_initialized; - char rng_name[30 + 1]; -#endif /* CONFIG_B43_HWRNG */ - - /* List of all wireless devices on this chip */ - struct list_head devlist; - u8 nr_devs; - - bool radiotap_enabled; - bool radio_enabled; - - /* The beacon we are currently using (AP or IBSS mode). */ - struct sk_buff *current_beacon; - bool beacon0_uploaded; - bool beacon1_uploaded; - bool beacon_templates_virgin; /* Never wrote the templates? */ - struct work_struct beacon_update_trigger; - - /* The current QOS parameters for the 4 queues. */ - struct b43_qos_params qos_params[4]; - - /* Work for adjustment of the transmission power. - * This is scheduled when we determine that the actual TX output - * power doesn't match what we want. */ - struct work_struct txpower_adjust_work; - - /* Packet transmit work */ - struct work_struct tx_work; - /* Queue of packets to be transmitted. */ - struct sk_buff_head tx_queue; - - /* The device LEDs. */ - struct b43_leds leds; -}; +struct b43_wl; /* The type of the firmware file. */ enum b43_firmware_file_type { @@ -824,6 +749,97 @@ struct b43_wldev { #endif }; +/* + * Include goes here to avoid a dependency problem. + * A better fix would be to integrate xmit.h into b43.h. + */ +#include "xmit.h" + +/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ +struct b43_wl { + /* Pointer to the active wireless device on this chip */ + struct b43_wldev *current_dev; + /* Pointer to the ieee80211 hardware data structure */ + struct ieee80211_hw *hw; + + /* Global driver mutex. Every operation must run with this mutex locked. */ + struct mutex mutex; + /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ + * handler, only. This basically is just the IRQ mask register. */ + spinlock_t hardirq_lock; + + /* The number of queues that were registered with the mac80211 subsystem + * initially. This is a backup copy of hw->queues in case hw->queues has + * to be dynamically lowered at runtime (Firmware does not support QoS). + * hw->queues has to be restored to the original value before unregistering + * from the mac80211 subsystem. */ + u16 mac80211_initially_registered_queues; + + /* We can only have one operating interface (802.11 core) + * at a time. General information about this interface follows. + */ + + struct ieee80211_vif *vif; + /* The MAC address of the operating interface. */ + u8 mac_addr[ETH_ALEN]; + /* Current BSSID */ + u8 bssid[ETH_ALEN]; + /* Interface type. (NL80211_IFTYPE_XXX) */ + int if_type; + /* Is the card operating in AP, STA or IBSS mode? */ + bool operating; + /* filter flags */ + unsigned int filter_flags; + /* Stats about the wireless interface */ + struct ieee80211_low_level_stats ieee_stats; + +#ifdef CONFIG_B43_HWRNG + struct hwrng rng; + bool rng_initialized; + char rng_name[30 + 1]; +#endif /* CONFIG_B43_HWRNG */ + + /* List of all wireless devices on this chip */ + struct list_head devlist; + u8 nr_devs; + + bool radiotap_enabled; + bool radio_enabled; + + /* The beacon we are currently using (AP or IBSS mode). */ + struct sk_buff *current_beacon; + bool beacon0_uploaded; + bool beacon1_uploaded; + bool beacon_templates_virgin; /* Never wrote the templates? */ + struct work_struct beacon_update_trigger; + + /* The current QOS parameters for the 4 queues. */ + struct b43_qos_params qos_params[4]; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; + + /* Packet transmit work */ + struct work_struct tx_work; + /* Queue of packets to be transmitted. */ + struct sk_buff_head tx_queue; + + /* The device LEDs. */ + struct b43_leds leds; + +#ifdef CONFIG_B43_PIO + /* + * RX/TX header/tail buffers used by the frame transmit functions. + */ + struct b43_rxhdr_fw4 rxhdr; + struct b43_txhdr txhdr; + u8 rx_tail[4]; + u8 tx_tail[4]; +#endif /* CONFIG_B43_PIO */ +}; + static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw) { return hw->priv; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8701034569f..de4e804bedf 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot) } static int dma_tx_fragment(struct b43_dmaring *ring, - struct sk_buff *skb) + struct sk_buff **in_skb) { + struct sk_buff *skb = *in_skb; const struct b43_dma_ops *ops = ring->ops; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u8 *header; @@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len); + memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb)); + bounce_skb->dev = skb->dev; + skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb)); + info = IEEE80211_SKB_CB(bounce_skb); + dev_kfree_skb_any(skb); skb = bounce_skb; + *in_skb = bounce_skb; meta->skb = skb; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { @@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb) * static, so we don't need to store it per frame. */ ring->queue_prio = skb_get_queue_mapping(skb); - err = dma_tx_fragment(ring, skb); + /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing + * into the skb data or cb now. */ + hdr = NULL; + info = NULL; + err = dma_tx_fragment(ring, &skb); if (unlikely(err == -ENOKEY)) { /* Drop this packet, as we don't have the encryption key * anymore and must not transmit it unencrypted. */ diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index fbe3d4f62ce..1e8dba48800 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -348,9 +348,9 @@ void b43_leds_register(struct b43_wldev *dev) } } -void b43_leds_unregister(struct b43_wldev *dev) +void b43_leds_unregister(struct b43_wl *wl) { - struct b43_leds *leds = &dev->wl->leds; + struct b43_leds *leds = &wl->leds; b43_unregister_led(&leds->led_tx); b43_unregister_led(&leds->led_rx); diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h index 9592e4c5a5f..32b66d53cda 100644 --- a/drivers/net/wireless/b43/leds.h +++ b/drivers/net/wireless/b43/leds.h @@ -1,6 +1,7 @@ #ifndef B43_LEDS_H_ #define B43_LEDS_H_ +struct b43_wl; struct b43_wldev; #ifdef CONFIG_B43_LEDS @@ -60,7 +61,7 @@ enum b43_led_behaviour { }; void b43_leds_register(struct b43_wldev *dev); -void b43_leds_unregister(struct b43_wldev *dev); +void b43_leds_unregister(struct b43_wl *wl); void b43_leds_init(struct b43_wldev *dev); void b43_leds_exit(struct b43_wldev *dev); void b43_leds_stop(struct b43_wldev *dev); @@ -76,7 +77,7 @@ struct b43_leds { static inline void b43_leds_register(struct b43_wldev *dev) { } -static inline void b43_leds_unregister(struct b43_wldev *dev) +static inline void b43_leds_unregister(struct b43_wl *wl) { } static inline void b43_leds_init(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 9b907a36bb8..098dda1a67c 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3874,6 +3874,7 @@ static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_wldev *orig_dev; + u32 mask; redo: if (!dev || b43_status(dev) < B43_STAT_STARTED) @@ -3920,7 +3921,8 @@ redo: goto redo; return dev; } - B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)); + mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); + B43_WARN_ON(mask != 0xFFFFFFFF && mask); /* Drain the TX queue */ while (skb_queue_len(&wl->tx_queue)) @@ -4519,9 +4521,8 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, { struct b43_wl *wl = hw_to_b43_wl(hw); - mutex_lock(&wl->mutex); + /* FIXME: add locking */ b43_update_templates(wl); - mutex_unlock(&wl->mutex); return 0; } @@ -4997,7 +4998,7 @@ static void b43_remove(struct ssb_device *dev) if (list_empty(&wl->devlist)) { b43_rng_exit(wl); - b43_leds_unregister(wldev); + b43_leds_unregister(wl); /* Last core on the chip unregistered. * We can destroy common struct b43_wl. */ diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index e96091b3149..9b904440021 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -30,6 +30,7 @@ #include "xmit.h" #include <linux/delay.h> +#include <linux/sched.h> static u16 generate_cookie(struct b43_pio_txqueue *q, @@ -331,6 +332,7 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q, unsigned int data_len) { struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; const u8 *data = _data; ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI; @@ -343,7 +345,11 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q, /* Write the last byte. */ ctl &= ~B43_PIO_TXCTL_WRITEHI; b43_piotx_write16(q, B43_PIO_TXCTL, ctl); - b43_piotx_write16(q, B43_PIO_TXDATA, data[data_len - 1]); + wl->tx_tail[0] = data[data_len - 1]; + wl->tx_tail[1] = 0; + ssb_block_write(dev->dev, wl->tx_tail, 2, + q->mmio_base + B43_PIO_TXDATA, + sizeof(u16)); } return ctl; @@ -376,6 +382,7 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q, unsigned int data_len) { struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; const u8 *data = _data; ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 | @@ -386,26 +393,33 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q, q->mmio_base + B43_PIO8_TXDATA, sizeof(u32)); if (data_len & 3) { - u32 value = 0; - + wl->tx_tail[3] = 0; /* Write the last few bytes. */ ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_24_31); - data = &(data[data_len - 1]); switch (data_len & 3) { case 3: - ctl |= B43_PIO8_TXCTL_16_23; - value |= (u32)(*data) << 16; - data--; + ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15; + wl->tx_tail[0] = data[data_len - 3]; + wl->tx_tail[1] = data[data_len - 2]; + wl->tx_tail[2] = data[data_len - 1]; + break; case 2: ctl |= B43_PIO8_TXCTL_8_15; - value |= (u32)(*data) << 8; - data--; + wl->tx_tail[0] = data[data_len - 2]; + wl->tx_tail[1] = data[data_len - 1]; + wl->tx_tail[2] = 0; + break; case 1: - value |= (u32)(*data); + wl->tx_tail[0] = data[data_len - 1]; + wl->tx_tail[1] = 0; + wl->tx_tail[2] = 0; + break; } b43_piotx_write32(q, B43_PIO8_TXCTL, ctl); - b43_piotx_write32(q, B43_PIO8_TXDATA, value); + ssb_block_write(dev->dev, wl->tx_tail, 4, + q->mmio_base + B43_PIO8_TXDATA, + sizeof(u32)); } return ctl; @@ -435,8 +449,9 @@ static void pio_tx_frame_4byte_queue(struct b43_pio_txpacket *pack, static int pio_tx_frame(struct b43_pio_txqueue *q, struct sk_buff *skb) { + struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; struct b43_pio_txpacket *pack; - struct b43_txhdr txhdr; u16 cookie; int err; unsigned int hdrlen; @@ -447,8 +462,8 @@ static int pio_tx_frame(struct b43_pio_txqueue *q, struct b43_pio_txpacket, list); cookie = generate_cookie(q, pack); - hdrlen = b43_txhdr_size(q->dev); - err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb, + hdrlen = b43_txhdr_size(dev); + err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb, info, cookie); if (err) return err; @@ -456,15 +471,15 @@ static int pio_tx_frame(struct b43_pio_txqueue *q, if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { /* Tell the firmware about the cookie of the last * mcast frame, so it can clear the more-data bit in it. */ - b43_shm_write16(q->dev, B43_SHM_SHARED, + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_MCASTCOOKIE, cookie); } pack->skb = skb; if (q->rev >= 8) - pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen); + pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen); else - pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen); + pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen); /* Remove it from the list of available packet slots. * It will be put back when we receive the status report. */ @@ -604,14 +619,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev, static bool pio_rx_frame(struct b43_pio_rxqueue *q) { struct b43_wldev *dev = q->dev; - struct b43_rxhdr_fw4 rxhdr; + struct b43_wl *wl = dev->wl; u16 len; u32 macstat; unsigned int i, padding; struct sk_buff *skb; const char *err_msg = NULL; - memset(&rxhdr, 0, sizeof(rxhdr)); + memset(&wl->rxhdr, 0, sizeof(wl->rxhdr)); /* Check if we have data and wait for it to get ready. */ if (q->rev >= 8) { @@ -649,16 +664,16 @@ data_ready: /* Get the preamble (RX header) */ if (q->rev >= 8) { - ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr), + ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr), q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); } else { - ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr), + ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr), q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); } /* Sanity checks. */ - len = le16_to_cpu(rxhdr.frame_len); + len = le16_to_cpu(wl->rxhdr.frame_len); if (unlikely(len > 0x700)) { err_msg = "len > 0x700"; goto rx_error; @@ -668,7 +683,7 @@ data_ready: goto rx_error; } - macstat = le32_to_cpu(rxhdr.mac_status); + macstat = le32_to_cpu(wl->rxhdr.mac_status); if (macstat & B43_RX_MAC_FCSERR) { if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) { /* Drop frames with failed FCS. */ @@ -693,21 +708,23 @@ data_ready: q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); if (len & 3) { - u32 value; - char *data; - /* Read the last few bytes. */ - value = b43_piorx_read32(q, B43_PIO8_RXDATA); - data = &(skb->data[len + padding - 1]); + ssb_block_read(dev->dev, wl->rx_tail, 4, + q->mmio_base + B43_PIO8_RXDATA, + sizeof(u32)); switch (len & 3) { case 3: - *data = (value >> 16); - data--; + skb->data[len + padding - 3] = wl->rx_tail[0]; + skb->data[len + padding - 2] = wl->rx_tail[1]; + skb->data[len + padding - 1] = wl->rx_tail[2]; + break; case 2: - *data = (value >> 8); - data--; + skb->data[len + padding - 2] = wl->rx_tail[0]; + skb->data[len + padding - 1] = wl->rx_tail[1]; + break; case 1: - *data = value; + skb->data[len + padding - 1] = wl->rx_tail[0]; + break; } } } else { @@ -715,15 +732,15 @@ data_ready: q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); if (len & 1) { - u16 value; - /* Read the last byte. */ - value = b43_piorx_read16(q, B43_PIO_RXDATA); - skb->data[len + padding - 1] = value; + ssb_block_read(dev->dev, wl->rx_tail, 2, + q->mmio_base + B43_PIO_RXDATA, + sizeof(u16)); + skb->data[len + padding - 1] = wl->rx_tail[0]; } } - b43_rx(q->dev, skb, &rxhdr); + b43_rx(q->dev, skb, &wl->rxhdr); return 1; diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 7a3218c5ba7..ffdce6f3c90 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -33,7 +33,8 @@ bool b43_is_hw_radio_enabled(struct b43_wldev *dev) & B43_MMIO_RADIO_HWENABLED_HI_MASK)) return 1; } else { - if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO) + if (b43_status(dev) >= B43_STAT_STARTED && + b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO) & B43_MMIO_RADIO_HWENABLED_LO_MASK) return 1; } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index ac9f600995e..f4e9695ec18 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -27,7 +27,7 @@ */ -#include "xmit.h" +#include "b43.h" #include "phy_common.h" #include "dma.h" #include "pio.h" @@ -690,7 +690,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) } memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); + + local_bh_disable(); ieee80211_rx(dev->wl->hw, skb); + local_bh_enable(); #if B43_DEBUG dev->rx_count++; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 1d9223b3d4c..4b60148a5e6 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -37,6 +37,7 @@ #include <linux/firmware.h> #include <linux/wireless.h> #include <linux/workqueue.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/dma-mapping.h> #include <net/dst.h> diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c index 11319ec2d64..aaf227203a9 100644 --- a/drivers/net/wireless/b43legacy/phy.c +++ b/drivers/net/wireless/b43legacy/phy.c @@ -31,6 +31,7 @@ #include <linux/delay.h> #include <linux/pci.h> +#include <linux/sched.h> #include <linux/types.h> #include "b43legacy.h" diff --git a/drivers/net/wireless/hostap/hostap_info.c b/drivers/net/wireless/hostap/hostap_info.c index 6fa14a4e4b5..4dfb40a84c9 100644 --- a/drivers/net/wireless/hostap/hostap_info.c +++ b/drivers/net/wireless/hostap/hostap_info.c @@ -1,6 +1,7 @@ /* Host AP driver Info Frame processing (part of hostap.o module) */ #include <linux/if_arp.h> +#include <linux/sched.h> #include "hostap_wlan.h" #include "hostap.h" #include "hostap_ap.h" diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 3f2bda881a4..9419cebca8a 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1,6 +1,7 @@ /* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ #include <linux/types.h> +#include <linux/sched.h> #include <linux/ethtool.h> #include <linux/if_arp.h> #include <net/lib80211.h> diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1e697..6e2fc0cb6f8 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, struct ipw2100_priv *priv; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0); + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); if (!dev) return NULL; priv = libipw_priv(dev); @@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); - free_ieee80211(dev, 0); + free_ieee80211(dev); pci_set_drvdata(pci_dev, NULL); } @@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) if (dev->base_addr) iounmap((void __iomem *)dev->base_addr); - free_ieee80211(dev, 0); + free_ieee80211(dev); } pci_release_regions(pci_dev); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6ed4e7..a6ca536e44f 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -30,6 +30,7 @@ ******************************************************************************/ +#include <linux/sched.h> #include "ipw2200.h" @@ -103,25 +104,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH; static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */ #endif -static struct ieee80211_rate ipw2200_rates[] = { - { .bitrate = 10 }, - { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60 }, - { .bitrate = 90 }, - { .bitrate = 120 }, - { .bitrate = 180 }, - { .bitrate = 240 }, - { .bitrate = 360 }, - { .bitrate = 480 }, - { .bitrate = 540 } -}; - -#define ipw2200_a_rates (ipw2200_rates + 4) -#define ipw2200_num_a_rates 8 -#define ipw2200_bg_rates (ipw2200_rates + 0) -#define ipw2200_num_bg_rates 12 #ifdef CONFIG_IPW2200_QOS static int qos_enable = 0; @@ -8673,6 +8655,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * */ +static int ipw_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = libipw_priv(dev); + mutex_lock(&priv->mutex); + if (priv->status & STATUS_RF_KILL_MASK) + strcpy(wrqu->name, "radio off"); + else if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c", + ipw_modes[priv->assoc_request.ieee_mode]); + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + mutex_unlock(&priv->mutex); + return 0; +} + static int ipw_set_channel(struct ipw_priv *priv, u8 channel) { if (channel == 0) { @@ -9972,7 +9972,7 @@ static int ipw_wx_sw_reset(struct net_device *dev, /* Rebase the WE IOCTLs to zero for the handler array */ #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT] static iw_handler ipw_wx_handlers[] = { - IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname, + IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name, IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq, IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq, IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode, @@ -11416,100 +11416,16 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { - int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); - const struct libipw_geo *geo = libipw_get_geo(priv->ieee); - struct wireless_dev *wdev = &priv->ieee->wdev; mutex_lock(&priv->mutex); if (ipw_up(priv)) { - rc = -EIO; - goto out; - } - - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); - - /* fill-out priv->ieee->bg_band */ - if (geo->bg_channels) { - struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; - - bg_band->band = IEEE80211_BAND_2GHZ; - bg_band->n_channels = geo->bg_channels; - bg_band->channels = - kzalloc(geo->bg_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to bg_band.channels */ - for (i = 0; i < geo->bg_channels; i++) { - bg_band->channels[i].band = IEEE80211_BAND_2GHZ; - bg_band->channels[i].center_freq = geo->bg[i].freq; - bg_band->channels[i].hw_value = geo->bg[i].channel; - bg_band->channels[i].max_power = geo->bg[i].max_power; - if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) - bg_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) - bg_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) - bg_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - bg_band->bitrates = ipw2200_bg_rates; - bg_band->n_bitrates = ipw2200_num_bg_rates; - - wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band; - } - - /* fill-out priv->ieee->a_band */ - if (geo->a_channels) { - struct ieee80211_supported_band *a_band = &priv->ieee->a_band; - - a_band->band = IEEE80211_BAND_5GHZ; - a_band->n_channels = geo->a_channels; - a_band->channels = - kzalloc(geo->a_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to a_band.channels */ - for (i = 0; i < geo->a_channels; i++) { - a_band->channels[i].band = IEEE80211_BAND_2GHZ; - a_band->channels[i].center_freq = geo->a[i].freq; - a_band->channels[i].hw_value = geo->a[i].channel; - a_band->channels[i].max_power = geo->a[i].max_power; - if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY) - a_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->a[i].flags & LIBIPW_CH_NO_IBSS) - a_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT) - a_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - a_band->bitrates = ipw2200_a_rates; - a_band->n_bitrates = ipw2200_num_a_rates; - - wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band; - } - - set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); - - /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { - rc = -EIO; - goto out; + mutex_unlock(&priv->mutex); + return -EIO; } -out: mutex_unlock(&priv->mutex); - return rc; + return 0; } /* PCI driver stuff */ @@ -11640,7 +11556,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) if (priv->prom_net_dev) return -EPERM; - priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1); + priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv)); if (priv->prom_net_dev == NULL) return -ENOMEM; @@ -11659,7 +11575,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) rc = register_netdev(priv->prom_net_dev); if (rc) { - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; return rc; } @@ -11673,7 +11589,7 @@ static void ipw_prom_free(struct ipw_priv *priv) return; unregister_netdev(priv->prom_net_dev); - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; } @@ -11701,7 +11617,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, struct ipw_priv *priv; int i; - net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0); + net_dev = alloc_ieee80211(sizeof(struct ipw_priv)); if (net_dev == NULL) { err = -ENOMEM; goto out; @@ -11849,7 +11765,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); out_free_ieee80211: - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); out: return err; } @@ -11916,7 +11832,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); free_firmware(); } diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391172f..1e334ff6bd5 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -31,7 +31,6 @@ #include <linux/ieee80211.h> #include <net/lib80211.h> -#include <net/cfg80211.h> #define LIBIPW_VERSION "git-1.1.13" @@ -784,15 +783,12 @@ struct libipw_geo { struct libipw_device { struct net_device *dev; - struct wireless_dev wdev; struct libipw_security sec; /* Bookkeeping structures */ struct libipw_stats ieee_stats; struct libipw_geo geo; - struct ieee80211_supported_band bg_band; - struct ieee80211_supported_band a_band; /* Probe / Beacon management */ struct list_head network_free_list; @@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate) } /* ieee80211.c */ -extern void free_ieee80211(struct net_device *dev, int monitor); -extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6aed7d..eb2b60834c1 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -struct cfg80211_ops libipw_config_ops = { }; -void *libipw_wiphy_privid = &libipw_wiphy_privid; - static int libipw_networks_allocate(struct libipw_device *ieee) { if (ieee->networks) @@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu) } EXPORT_SYMBOL(libipw_change_mtu); -struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) +struct net_device *alloc_ieee80211(int sizeof_priv) { struct libipw_device *ieee; struct net_device *dev; @@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->dev = dev; - if (!monitor) { - ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0); - if (!ieee->wdev.wiphy) { - LIBIPW_ERROR("Unable to allocate wiphy.\n"); - goto failed_free_netdev; - } - - ieee->dev->ieee80211_ptr = &ieee->wdev; - ieee->wdev.iftype = NL80211_IFTYPE_STATION; - - /* Fill-out wiphy structure bits we know... Not enough info - here to call set_wiphy_dev or set MAC address or channel info - -- have to do that in ->ndo_init... */ - ieee->wdev.wiphy->privid = libipw_wiphy_privid; - - ieee->wdev.wiphy->max_scan_ssids = 1; - ieee->wdev.wiphy->max_scan_ie_len = 0; - ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) - | BIT(NL80211_IFTYPE_ADHOC); - } - err = libipw_networks_allocate(ieee); if (err) { LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err); - goto failed_free_wiphy; + goto failed_free_netdev; } libipw_networks_initialize(ieee); @@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) return dev; -failed_free_wiphy: - if (!monitor) - wiphy_free(ieee->wdev.wiphy); failed_free_netdev: free_netdev(dev); failed: return NULL; } -void free_ieee80211(struct net_device *dev, int monitor) +void free_ieee80211(struct net_device *dev) { struct libipw_device *ieee = netdev_priv(dev); lib80211_crypt_info_free(&ieee->crypt_info); libipw_networks_free(ieee); - - /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); - wiphy_free(ieee->wdev.wiphy); - } - free_netdev(dev); } diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 2716b91ba9f..950267ab556 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -161,5 +161,6 @@ struct iwl_cfg iwl1000_bgn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index a16bd4147ea..cbb0585083a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -702,7 +702,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, u8 sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n", + IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", hdr->addr1); sta_id = iwl_add_station(priv, hdr->addr1, false, CMD_ASYNC, NULL); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index e70c5b0af36..f059b49dc69 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -30,6 +30,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -610,7 +611,7 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags & + rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; /* set the preamble flag if appropriate */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index a22a0501c19..6f703a04184 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -30,6 +30,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index eb08f441100..6e6f516ba40 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -29,6 +29,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -317,7 +318,7 @@ static void iwl5000_gain_computation(struct iwl_priv *priv, (s32)average_noise[i])) / 1500; /* bound gain by 2 bits value max, 3rd bit is sign */ data->delta_gain_code[i] = - min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); if (delta_g < 0) /* set negative sign */ diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index c295b8ee922..1473452ba22 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -175,6 +175,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; /* @@ -198,6 +199,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_2agn_cfg = { @@ -218,6 +220,7 @@ struct iwl_cfg iwl6050_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6000_3agn_cfg = { @@ -238,6 +241,7 @@ struct iwl_cfg iwl6000_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_3agn_cfg = { @@ -258,6 +262,7 @@ struct iwl_cfg iwl6050_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 346dc06fa7b..81726ee3285 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -418,6 +418,15 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, else if (tid == IWL_AGG_ALL_TID) for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + if (priv->cfg->use_rts_for_ht) { + /* + * switch to RTS/CTS if it is the prefer protection method + * for HT traffic + */ + IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n"); + priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN; + iwlcore_commit_rxon(priv); + } } static inline int get_num_of_ant_from_rate(u32 rate_n_flags) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index cdc07c47745..921dc4a26fe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -115,9 +116,6 @@ int iwl_commit_rxon(struct iwl_priv *priv) /* always get timestamp with Rx frame */ priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; - /* allow CTS-to-self if possible. this is relevant only for - * 5000, but will not damage 4965 */ - priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; ret = iwl_check_rxon_cmd(priv); if (ret) { @@ -217,6 +215,13 @@ int iwl_commit_rxon(struct iwl_priv *priv) "Could not send WEP static key.\n"); } + /* + * allow CTS-to-self if possible for new association. + * this is relevant only for 5000 series and up, + * but will not damage 4965 + */ + priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; + /* Apply the new configuration * RXON assoc doesn't clear the station table in uCode, */ @@ -3105,8 +3110,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) out_pci_disable_device: pci_disable_device(pdev); out_ieee80211_free_hw: - ieee80211_free_hw(priv->hw); iwl_free_traffic_mem(priv); + ieee80211_free_hw(priv->hw); out: return err; } diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 2c5c88fc38f..4afaf773aea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1154,7 +1154,7 @@ struct iwl_wep_cmd { #define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) -#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0) +#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0 #define RX_RES_PHY_FLAGS_ANTENNA_POS 4 #define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 484d5c1a731..2dc92875545 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -29,6 +29,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/etherdevice.h> +#include <linux/sched.h> #include <net/mac80211.h> #include "iwl-eeprom.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index e50103a956b..7754538c219 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -213,6 +213,7 @@ struct iwl_mod_params { * @pa_type: used by 6000 series only to identify the type of Power Amplifier * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory + * @use_rts_for_ht: use rts/cts protection for HT traffic * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the @@ -255,6 +256,7 @@ struct iwl_cfg { const bool shadow_ram_support; const bool ht_greenfield_support; const bool broken_powersave; + bool use_rts_for_ht; }; /*************************** diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 3d2b93a61e6..e14c9952a93 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -410,7 +410,6 @@ static int iwl_find_otp_image(struct iwl_priv *priv, u16 *validblockaddr) { u16 next_link_addr = 0, link_value = 0, valid_addr; - int ret = 0; int usedblocks = 0; /* set addressing mode to absolute to traverse the link list */ @@ -430,29 +429,29 @@ static int iwl_find_otp_image(struct iwl_priv *priv, * check for more block on the link list */ valid_addr = next_link_addr; - next_link_addr = link_value; + next_link_addr = link_value * sizeof(u16); IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n", usedblocks, next_link_addr); if (iwl_read_otp_word(priv, next_link_addr, &link_value)) return -EINVAL; if (!link_value) { /* - * reach the end of link list, + * reach the end of link list, return success and * set address point to the starting address * of the image */ - goto done; + *validblockaddr = valid_addr; + /* skip first 2 bytes (link list pointer) */ + *validblockaddr += 2; + return 0; } /* more in the link list, continue */ usedblocks++; - } while (usedblocks < priv->cfg->max_ll_items); - /* OTP full, use last block */ - IWL_DEBUG_INFO(priv, "OTP is full, use last block\n"); -done: - *validblockaddr = valid_addr; - /* skip first 2 bytes (link list pointer) */ - *validblockaddr += 2; - return ret; + } while (usedblocks <= priv->cfg->max_ll_items); + + /* OTP has no valid blocks */ + IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n"); + return -EINVAL; } /** diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 6b68db7b1b8..80b9e45d9b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -220,35 +220,35 @@ struct iwl_eeprom_enhanced_txpwr { * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_) */ /* 2.4 GHz band: CCK */ -#define EEPROM_LB_CCK_20_COMMON ((0xAA)\ +#define EEPROM_LB_CCK_20_COMMON ((0xA8)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */ /* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ -#define EEPROM_LB_OFDM_COMMON ((0xB2)\ +#define EEPROM_LB_OFDM_COMMON ((0xB0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ /* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */ -#define EEPROM_HB_OFDM_COMMON ((0xCA)\ +#define EEPROM_HB_OFDM_COMMON ((0xC8)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ /* 2.4GHz band channels: * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */ -#define EEPROM_LB_OFDM_20_BAND ((0xE2)\ +#define EEPROM_LB_OFDM_20_BAND ((0xE0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */ /* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */ -#define EEPROM_LB_OFDM_HT40_BAND ((0x122)\ +#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */ /* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */ -#define EEPROM_HB_OFDM_20_BAND ((0x14A)\ +#define EEPROM_HB_OFDM_20_BAND ((0x148)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */ /* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */ -#define EEPROM_HB_OFDM_HT40_BAND ((0x17A)\ +#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ /* 2.4 GHz band, channnel 13: Legacy, HT */ -#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x192)\ +#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ /* 5.2 GHz band, channnel 140: Legacy, HT */ -#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A2)\ +#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ /* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */ -#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B2)\ +#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */ diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 532c8d6cd8d..a6856daf14c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -28,6 +28,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/sched.h> #include <net/mac80211.h> #include "iwl-dev.h" /* FIXME: remove */ diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 8e1bb53c0aa..493626bcd3e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -1044,7 +1044,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, * as a bitmask. */ rx_status.antenna = - le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK) + (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> RX_RES_PHY_FLAGS_ANTENNA_POS; /* set the preamble flag if appropriate */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index c1890754470..b7e196e3c8d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -28,6 +28,7 @@ *****************************************************************************/ #include <linux/etherdevice.h> +#include <linux/sched.h> #include <net/mac80211.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -1276,8 +1277,16 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid) return -ENXIO; } + if (priv->stations[sta_id].tid[tid].agg.state == + IWL_EMPTYING_HW_QUEUE_ADDBA) { + IWL_DEBUG_HT(priv, "AGG stop before setup done\n"); + ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid); + priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; + return 0; + } + if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) - IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n"); + IWL_WARN(priv, "Stopping AGG while state not ON or starting\n"); tid_data = &priv->stations[sta_id].tid[tid]; ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index c390dbd877e..d00a8033409 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/wireless.h> @@ -4096,8 +4097,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); out_ieee80211_free_hw: - ieee80211_free_hw(priv->hw); iwl_free_traffic_mem(priv); + ieee80211_free_hw(priv->hw); out: return err; } diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c index a56a2b0ac99..f3c55658225 100644 --- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c +++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/sched.h> #include <linux/etherdevice.h> #include <linux/wireless.h> #include <linux/ieee80211.h> diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c index 23b52fa2605..84158b6d35d 100644 --- a/drivers/net/wireless/iwmc3200wifi/commands.c +++ b/drivers/net/wireless/iwmc3200wifi/commands.c @@ -40,6 +40,7 @@ #include <linux/wireless.h> #include <linux/etherdevice.h> #include <linux/ieee80211.h> +#include <linux/sched.h> #include "iwm.h" #include "bus.h" diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c index d668e475632..222eb2cf1b3 100644 --- a/drivers/net/wireless/iwmc3200wifi/main.c +++ b/drivers/net/wireless/iwmc3200wifi/main.c @@ -38,6 +38,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/sched.h> #include <linux/ieee80211.h> #include <linux/wireless.h> diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 40dbcbc1659..771a301003c 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -38,6 +38,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/sched.h> #include <linux/etherdevice.h> #include <linux/wireless.h> #include <linux/ieee80211.h> diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 685098148e1..0a324dcd264 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -6,6 +6,7 @@ #include <net/iw_handler.h> #include <net/lib80211.h> #include <linux/kfifo.h> +#include <linux/sched.h> #include "host.h" #include "hostcmd.h" #include "decl.h" diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index c42d3faa266..23f684337fd 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -3,6 +3,7 @@ * responses as well as events generated by firmware. */ #include <linux/delay.h> +#include <linux/sched.h> #include <linux/if_arp.h> #include <linux/netdevice.h> #include <asm/unaligned.h> diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 039b555e4d7..53d56ab83c0 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -169,16 +169,19 @@ static int lbs_ethtool_set_wol(struct net_device *dev, struct lbs_private *priv = dev->ml_priv; uint32_t criteria = 0; - if (priv->wol_criteria == 0xffffffff && wol->wolopts) - return -EOPNOTSUPP; - if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; - if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA; - if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA; - if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA; - if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts & WAKE_UCAST) + criteria |= EHS_WAKE_ON_UNICAST_DATA; + if (wol->wolopts & WAKE_MCAST) + criteria |= EHS_WAKE_ON_MULTICAST_DATA; + if (wol->wolopts & WAKE_BCAST) + criteria |= EHS_WAKE_ON_BROADCAST_DATA; + if (wol->wolopts & WAKE_PHY) + criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts == 0) + criteria |= EHS_REMOVE_WAKEUP; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index cb8be8d7abc..5b3672c4d0c 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -134,7 +134,7 @@ static void spu_transaction_finish(struct if_spi_card *card) static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) { int err = 0; - u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); + __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); struct spi_message m; struct spi_transfer reg_trans; struct spi_transfer data_trans; @@ -166,7 +166,7 @@ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val) { - u16 buff; + __le16 buff; buff = cpu_to_le16(val); return spu_write(card, reg, (u8 *)&buff, sizeof(u16)); @@ -188,7 +188,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) { unsigned int delay; int err = 0; - u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); + __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); struct spi_message m; struct spi_transfer reg_trans; struct spi_transfer dummy_trans; @@ -235,7 +235,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) /* Read 16 bits from an SPI register */ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) { - u16 buf; + __le16 buf; int ret; ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); @@ -248,7 +248,7 @@ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) * The low 16 bits are read first. */ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) { - u32 buf; + __le32 buf; int err; err = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 92bc8c5f1ca..3fac4efa5ac 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -508,7 +508,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET), + skb->data + IPFIELD_ALIGN_OFFSET, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c index 4c018f7a0a8..8c3766a6e8e 100644 --- a/drivers/net/wireless/libertas/tx.c +++ b/drivers/net/wireless/libertas/tx.c @@ -3,6 +3,7 @@ */ #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/sched.h> #include "hostcmd.h" #include "radiotap.h" diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 896f532182f..38cfd79e059 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -631,6 +631,9 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000; if (WARN_ON(!data->beacon_int)) data->beacon_int = 1; + if (data->started) + mod_timer(&data->beacon_timer, + jiffies + data->beacon_int); } if (changed & BSS_CHANGED_ERP_CTS_PROT) { diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 17e199546ee..92af9b96bb7 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~"; static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - u8 buf[4]; + u8 *buf; int ret; - memcpy(&buf, p54u_romboot_3887, sizeof(buf)); + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + memcpy(buf, p54u_romboot_3887, 4); ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, - buf, sizeof(buf)); + buf, 4); + kfree(buf); if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to jump to " "boot ROM (%d)!\n", ret); diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 4c97c6ad6f5..bc08464d832 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -19,6 +19,7 @@ * */ +#include <linux/capability.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/if_arp.h> diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index e26d7b3ceab..2505be56ae3 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -23,6 +23,7 @@ #include <linux/netdevice.h> #include <linux/ethtool.h> #include <linux/pci.h> +#include <linux/sched.h> #include <linux/etherdevice.h> #include <linux/delay.h> #include <linux/if_arp.h> diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index f7c677e2094..69d2f882fd0 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -20,6 +20,7 @@ #include <linux/netdevice.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/system.h> diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88cd58eb3b9..1c88c2ea59a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2879,7 +2879,7 @@ static int write_essid(struct file *file, const char __user *buffer, unsigned long count, void *data) { static char proc_essid[33]; - int len = count; + unsigned int len = count; if (len > 32) len = 32; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index a084077a1c6..9fe770f7d7b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1994,7 +1994,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? - (skbdesc->entry->entry_idx + 1) : 0xff); + txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, skb->len - txdesc->l2pad); rt2x00_set_field32(&word, TXWI_W1_PACKETID, diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 7b3ee8c2eae..68bc9bb1dbf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -27,6 +27,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/poll.h> +#include <linux/sched.h> #include <linux/uaccess.h> #include "rt2x00.h" diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 71761b34383..73bbec58341 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -815,6 +815,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) mutex_init(&rt2x00dev->csr_mutex); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + /* * Make room for rt2x00_intf inside the per-interface * structure ieee80211_vif. @@ -871,8 +873,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - return 0; exit: diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c64db0ba7f4..c708d0be915 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -362,8 +362,9 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) rt2x00link_reset_tuner(rt2x00dev, false); - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) @@ -469,8 +470,10 @@ static void rt2x00link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ link->count++; - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_register(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 501544882c2..f02b48a9059 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -47,6 +47,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, (requesttype == USB_VENDOR_REQUEST_IN) ? usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { status = usb_control_msg(usb_dev, pipe, request, requesttype, @@ -60,8 +62,10 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, * -ENODEV: Device has disappeared, no point continuing. * All other errors: Try again. */ - else if (status == -ENODEV) + else if (status == -ENODEV) { + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); break; + } } ERROR(rt2x00dev, @@ -161,6 +165,9 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, { unsigned int i; + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00usb_register_read_lock(rt2x00dev, offset, reg); if (!rt2x00_get_field32(*reg, field)) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 1cbd9b4a3ef..14e7bb21007 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2381,6 +2381,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* Huawei-3Com */ { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) }, /* Hercules */ + { USB_DEVICE(0x06f8, 0xe002), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) }, /* Linksys */ @@ -2388,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) }, /* MSI */ + { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Ovislink */ + { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) }, /* Ralink */ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, @@ -2419,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = { /* Planex */ { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, + /* WideTell */ + { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) }, /* Zcom */ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) }, /* ZyXEL */ diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index a1c670fc155..cf8a4a40fdf 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -210,10 +210,10 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev) /* turn the LED off before exiting */ ieee80211_queue_delayed_work(dev, &priv->led_off, 0); - cancel_delayed_work_sync(&priv->led_off); - cancel_delayed_work_sync(&priv->led_on); rtl8187_unregister_led(&priv->led_rx); rtl8187_unregister_led(&priv->led_tx); + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); } #endif /* def CONFIG_RTL8187_LED */ diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c index 9fab13e4004..cad8037ab2a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c @@ -18,6 +18,7 @@ #include <net/mac80211.h> #include "rtl8187.h" +#include "rtl8187_rfkill.h" static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv) { diff --git a/drivers/net/znet.c b/drivers/net/znet.c index a0384b6f09b..b4234733375 100644 --- a/drivers/net/znet.c +++ b/drivers/net/znet.c @@ -169,7 +169,6 @@ static void znet_tx_timeout (struct net_device *dev); static int znet_request_resources (struct net_device *dev) { struct znet_private *znet = netdev_priv(dev); - unsigned long flags; if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev)) goto failed; @@ -187,13 +186,9 @@ static int znet_request_resources (struct net_device *dev) free_sia: release_region (znet->sia_base, znet->sia_size); free_tx_dma: - flags = claim_dma_lock(); free_dma (znet->tx_dma); - release_dma_lock (flags); free_rx_dma: - flags = claim_dma_lock(); free_dma (znet->rx_dma); - release_dma_lock (flags); free_irq: free_irq (dev->irq, dev); failed: @@ -203,14 +198,11 @@ static int znet_request_resources (struct net_device *dev) static void znet_release_resources (struct net_device *dev) { struct znet_private *znet = netdev_priv(dev); - unsigned long flags; release_region (znet->sia_base, znet->sia_size); release_region (dev->base_addr, znet->io_size); - flags = claim_dma_lock(); free_dma (znet->tx_dma); free_dma (znet->rx_dma); - release_dma_lock (flags); free_irq (dev->irq, dev); } |