diff options
Diffstat (limited to 'drivers/net')
28 files changed, 316 insertions, 1413 deletions
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 70705d1306b..eca55c52bdf 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -522,7 +522,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot) lp->tx_len = lp->exec_box->data[9]; /* Transmit list count */ lp->rx_len = lp->exec_box->data[11]; /* Receive list count */ - init_MUTEX_LOCKED(&lp->cmd_mutex); + sema_init(&lp->cmd_mutex, 0); init_completion(&lp->execution_cmd); init_completion(&lp->xceiver_cmd); diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 012613fde3f..03d063554b7 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -38,6 +38,7 @@ #include <asm/blackfin.h> #include <asm/cacheflush.h> #include <asm/portmux.h> +#include <mach/pll.h> #include "bfin_mac.h" diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 4b52c767ad0..3e5d0b6b651 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -608,7 +608,7 @@ static int sixpack_open(struct tty_struct *tty) spin_lock_init(&sp->lock); atomic_set(&sp->refcnt, 1); - init_MUTEX_LOCKED(&sp->dead_sem); + sema_init(&sp->dead_sem, 0); /* !!! length of the buffers. MTU is IP MTU, not PACLEN! */ diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 66e88bd59ca..4c628393c8b 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -747,7 +747,7 @@ static int mkiss_open(struct tty_struct *tty) spin_lock_init(&ax->buflock); atomic_set(&ax->refcnt, 1); - init_MUTEX_LOCKED(&ax->dead_sem); + sema_init(&ax->dead_sem, 0); ax->tty = tty; tty->disc_data = ax; diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index 1b051dab7b2..51d74447f8f 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -909,7 +909,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n dev->tx_skb = NULL; spin_lock_init(&dev->tx_lock); - init_MUTEX(&dev->fsm.sem); + sema_init(&dev->fsm.sem, 1); dev->drv = drv; dev->netdev = ndev; diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index c683f77c6f4..ff824e11f0b 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -87,7 +87,6 @@ earlier 3Com products. #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -280,25 +279,15 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); dev->watchdog_timeo = TX_TIMEOUT; return tc574_config(link); -} /* tc574_attach */ - -/* - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -*/ +} static void tc574_detach(struct pcmcia_device *link) { @@ -313,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc574_detach */ -/* - tc574_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -*/ - static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; static int tc574_config(struct pcmcia_device *link) @@ -352,7 +335,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -465,12 +448,6 @@ failed: } /* tc574_config */ -/* - After a card is removed, tc574_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -*/ - static void tc574_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -1198,9 +1175,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids); static struct pcmcia_driver tc574_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c574_cs", - }, + .name = "3c574_cs", .probe = tc574_probe, .remove = tc574_detach, .id_table = tc574_ids, diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 61f9cf2100f..a07e2229533 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -41,7 +41,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -176,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops; static void tc589_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - tc589_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static const struct net_device_ops el3_netdev_ops = { .ndo_open = el3_open, .ndo_stop = el3_close, @@ -216,9 +207,8 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -226,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); return tc589_config(link); -} /* tc589_attach */ - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ +} static void tc589_detach(struct pcmcia_device *link) { @@ -250,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc589_detach */ -/*====================================================================== - - tc589_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -294,7 +267,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -352,14 +325,6 @@ failed: return -ENODEV; } /* tc589_config */ -/*====================================================================== - - After a card is removed, tc589_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void tc589_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -955,9 +920,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids); static struct pcmcia_driver tc589_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c589_cs", - }, + .name = "3c589_cs", .probe = tc589_probe, .remove = tc589_detach, .id_table = tc589_ids, diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 5f05ffb240c..9e8b28b271a 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - axnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int axnet_probe(struct pcmcia_device *link) { axnet_dev_t *info; @@ -166,8 +157,7 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; @@ -177,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link) return axnet_config(link); } /* axnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -231,7 +212,7 @@ static int get_prom(struct pcmcia_device *link) }; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return 0; axnet_reset_8390(dev); @@ -248,14 +229,6 @@ static int get_prom(struct pcmcia_device *link) return 1; } /* get_prom */ -/*====================================================================== - - axnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -286,35 +259,16 @@ static int try_io_port(struct pcmcia_device *link) } } -static int axnet_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - int i; - cistpl_io_t *io = &cfg->io; + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->index == 0 || cfg->io.nwin == 0) + p_dev->config_index = 0x05; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) return -ENODEV; - p_dev->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -ENODEV; + return try_io_port(p_dev); } static int axnet_config(struct pcmcia_device *link) @@ -326,20 +280,19 @@ static int axnet_config(struct pcmcia_device *link) dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ - link->conf.Present = 0x63; + link->config_regs = 0x63; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; if (!link->irq) goto failed; + + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -414,14 +367,6 @@ failed: return -ENODEV; } /* axnet_config */ -/*====================================================================== - - After a card is removed, axnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void axnet_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -783,9 +728,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids); static struct pcmcia_driver axnet_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "axnet_cs", - }, + .name = "axnet_cs", .probe = axnet_probe, .remove = axnet_detach, .id_table = axnet_ids, diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3c400cfa82a..b706a724947 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -123,14 +122,6 @@ typedef struct com20020_dev_t { struct net_device *dev; } com20020_dev_t; -/*====================================================================== - - com20020_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int com20020_probe(struct pcmcia_device *p_dev) { com20020_dev_t *info; @@ -160,8 +151,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -174,15 +164,6 @@ fail_alloc_info: return -ENOMEM; } /* com20020_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void com20020_detach(struct pcmcia_device *link) { struct com20020_dev_t *info = link->priv; @@ -221,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link) } /* com20020_detach */ -/*====================================================================== - - com20020_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int com20020_config(struct pcmcia_device *link) { struct arcnet_local *lp; @@ -282,7 +255,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -316,14 +289,6 @@ failed: return -ENODEV; } /* com20020_config */ -/*====================================================================== - - After a card is removed, com20020_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void com20020_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "com20020_release\n"); @@ -366,9 +331,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids); static struct pcmcia_driver com20020_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "com20020_cs", - }, + .name = "com20020_cs", .probe = com20020_probe, .remove = com20020_detach, .id_table = com20020_ids, diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 98fffb03ecd..1c327598bbe 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -49,7 +49,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -252,8 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -313,7 +311,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ - link->conf.ConfigIndex = + link->config_index = ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } @@ -321,11 +319,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } -static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { return 0; /* strange, but that's what the code did already before... */ } @@ -362,28 +356,28 @@ static int fmvj18x_config(struct pcmcia_device *link) link->card_id == PRODID_TDK_NP9610 || link->card_id == PRODID_TDK_MN3200) { /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->conf.ConfigBase == 0x0fe0) + if (link->config_base == 0x0fe0) cardtype = MBH10302; else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), @@ -403,10 +397,10 @@ static int fmvj18x_config(struct pcmcia_device *link) case MANFID_FUJITSU: if (link->card_id == PRODID_FUJITSU_MBH10304) { cardtype = XXX10304; /* MBH10304 with buggy CIS */ - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; } else { cardtype = MBH10302; /* NextCom NC5310, etc. */ - link->conf.ConfigIndex = 1; + link->config_index = 1; } break; case MANFID_UNGERMANN: @@ -414,7 +408,7 @@ static int fmvj18x_config(struct pcmcia_device *link) break; default: cardtype = MBH10302; - link->conf.ConfigIndex = 1; + link->config_index = 1; } } @@ -432,7 +426,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -544,20 +538,18 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { - win_req_t req; u_char __iomem *base; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -1; - base = ioremap(req.Base, req.Size); - pcmcia_map_mem_page(link, link->win, 0); + base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); + pcmcia_map_mem_page(link, link->resource[2], 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -582,7 +574,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) } iounmap(base); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i != 0x200) ? 0 : -1; } /* fmvj18x_get_hwinfo */ @@ -590,27 +582,26 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { - win_req_t req; int i; struct net_device *dev = link->priv; unsigned int ioaddr; local_info_t *lp = netdev_priv(dev); /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[3]->start = link->resource[3]->end = 0; + i = pcmcia_request_window(link, link->resource[3], 0); if (i != 0) return -1; - lp->base = ioremap(req.Base, req.Size); + lp->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); if (lp->base == NULL) { printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n"); return -1; } - i = pcmcia_map_mem_page(link, link->win, 0); + i = pcmcia_map_mem_page(link, link->resource[3], 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; @@ -638,7 +629,6 @@ static void fmvj18x_release(struct pcmcia_device *link) struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); u_char __iomem *tmp; - int j; dev_dbg(&link->dev, "fmvj18x_release\n"); @@ -646,7 +636,6 @@ static void fmvj18x_release(struct pcmcia_device *link) tmp = lp->base; lp->base = NULL; /* set NULL before iounmap */ iounmap(tmp); - j = pcmcia_release_window(link, link->win); } pcmcia_disable_device(link); @@ -708,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); static struct pcmcia_driver fmvj18x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fmvj18x_cs", - }, + .name = "fmvj18x_cs", .probe = fmvj18x_probe, .remove = fmvj18x_detach, .id_table = fmvj18x_ids, diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index b0d06a3d962..bf7dff96d88 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -57,7 +57,6 @@ #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -102,9 +101,8 @@ static void ibmtr_detach(struct pcmcia_device *p_dev); typedef struct ibmtr_dev_t { struct pcmcia_device *p_dev; - struct net_device *dev; - window_handle_t sram_win_handle; - struct tok_info *ti; + struct net_device *dev; + struct tok_info *ti; } ibmtr_dev_t; static void netdev_get_drvinfo(struct net_device *dev, @@ -123,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { return tok_interrupt(irq, dev); }; -/*====================================================================== - - ibmtr_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int __devinit ibmtr_attach(struct pcmcia_device *link) { ibmtr_dev_t *info; @@ -153,9 +143,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_regs = PRESENT_OPTION; info->dev = dev; @@ -164,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) return ibmtr_config(link); } /* ibmtr_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ibmtr_detach(struct pcmcia_device *link) { struct ibmtr_dev_t *info = link->priv; @@ -197,26 +177,17 @@ static void ibmtr_detach(struct pcmcia_device *link) kfree(info); } /* ibmtr_detach */ -/*====================================================================== - - ibmtr_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - token-ring device available to the system. - -======================================================================*/ - static int __devinit ibmtr_config(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); - win_req_t req; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); - link->conf.ConfigIndex = 0x61; link->io_lines = 16; + link->config_index = 0x61; /* Determine if this is PRIMARY or ALTERNATE. */ @@ -240,39 +211,39 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); /* Allocate the MMIO memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x2000; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[2]->flags |= WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x2000; + ret = pcmcia_request_window(link, link->resource[2], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, mmiobase); + ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); if (ret) goto failed; - ti->mmio = ioremap(req.Base, req.Size); + ti->mmio = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /* Allocate the SRAM memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = sramsize * 1024; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &info->sram_win_handle); + link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; + link->resource[3]->end = sramsize * 1024; + ret = pcmcia_request_window(link, link->resource[3], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); + ret = pcmcia_map_mem_page(link, link->resource[3], srambase); if (ret) goto failed; ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(req.Base, req.Size); - ti->sram_phys = req.Base; + ti->sram_virt = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); + ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -301,14 +272,6 @@ failed: return -ENODEV; } /* ibmtr_config */ -/*====================================================================== - - After a card is removed, ibmtr_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ibmtr_release(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; @@ -316,7 +279,7 @@ static void ibmtr_release(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct tok_info *ti = netdev_priv(dev); iounmap(ti->mmio); } @@ -398,9 +361,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); static struct pcmcia_driver ibmtr_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ibmtr_cs", - }, + .name = "ibmtr_cs", .probe = ibmtr_attach, .remove = ibmtr_detach, .id_table = ibmtr_ids, diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 68f2deeb3ad..1eca4f5a6e7 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -146,7 +146,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -435,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* ---------------------------------------------------------------------------- -nmclan_attach - Creates an "instance" of the driver, allocating local data - structures for one device. The device is registered with Card - Services. ----------------------------------------------------------------------------- */ - static int nmclan_probe(struct pcmcia_device *link) { mace_private *lp; @@ -460,10 +452,9 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; lp->tx_free_frames=AM2150_MAX_TX_FRAMES; @@ -474,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link) return nmclan_config(link); } /* nmclan_attach */ -/* ---------------------------------------------------------------------------- -nmclan_detach - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. ----------------------------------------------------------------------------- */ - static void nmclan_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -625,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) return 0; } /* mace_init */ -/* ---------------------------------------------------------------------------- -nmclan_config - This routine is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. ----------------------------------------------------------------------------- */ - static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -650,7 +626,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -712,12 +688,6 @@ failed: return -ENODEV; } /* nmclan_config */ -/* ---------------------------------------------------------------------------- -nmclan_release - After a card is removed, nmclan_release() will unregister the - net device, and release the PCMCIA configuration. If the device - is still open, this will be postponed until it is closed. ----------------------------------------------------------------------------- */ static void nmclan_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "nmclan_release\n"); @@ -1535,9 +1505,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); static struct pcmcia_driver nmclan_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nmclan_cs", - }, + .name = "nmclan_cs", .probe = nmclan_probe, .remove = nmclan_detach, .id_table = nmclan_ids, diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index f9b509a6b09..5d7d1d3088a 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -42,7 +42,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -238,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = { #endif }; -/*====================================================================== - - pcnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int pcnet_probe(struct pcmcia_device *link) { pcnet_dev_t *info; @@ -260,23 +251,13 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; return pcnet_config(link); } /* pcnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -300,22 +281,22 @@ static void pcnet_detach(struct pcmcia_device *link) static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; - win_req_t req; u_char __iomem *base, *virt; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return NULL; - virt = ioremap(req.Base, req.Size); + virt = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); for (i = 0; i < NR_INFO; i++) { - pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); - base = &virt[hw_info[i].offset & (req.Size-1)]; + pcmcia_map_mem_page(link, link->resource[2], + hw_info[i].offset & ~(resource_size(link->resource[2])-1)); + base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && (readb(base+4) == hw_info[i].a2)) { @@ -326,7 +307,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) } iounmap(virt); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ @@ -421,7 +402,7 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) int i, j; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ @@ -463,14 +444,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) return &default_info; } /* get_hwired */ -/*====================================================================== - - pcnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -502,43 +475,22 @@ static int try_io_port(struct pcmcia_device *link) } } -static int pcnet_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { int *priv = priv_data; int try = (*priv & 0x1); - int i; - cistpl_io_t *io = &cfg->io; - if (cfg->index == 0 || cfg->io.nwin == 0) - return -EINVAL; + *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } + if (p_dev->config_index == 0) + return -EINVAL; - *priv &= ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) + return -EINVAL; - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - if (!try) - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - else + if (try) p_dev->io_lines = 16; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -EINVAL; + return try_io_port(p_dev); } static hw_info_t *pcnet_try_config(struct pcmcia_device *link, @@ -560,15 +512,14 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, if (!link->irq) return NULL; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; + if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; + link->config_index |= 0x10; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) return NULL; @@ -583,7 +534,7 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, } else dev->if_port = 0; - if ((link->conf.ConfigBase == 0x03c0) && + if ((link->config_base == 0x03c0) && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { dev_info(&link->dev, "this is an AX88190 card - use axnet_cs instead.\n"); @@ -689,14 +640,6 @@ failed: return -ENODEV; } /* pcnet_config */ -/*====================================================================== - - After a card is removed, pcnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void pcnet_release(struct pcmcia_device *link) { pcnet_dev_t *info = PRIV(link->priv); @@ -709,15 +652,6 @@ static void pcnet_release(struct pcmcia_device *link) pcmcia_disable_device(link); } -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the net drivers from trying - to talk to the card any more. - -======================================================================*/ - static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1486,7 +1420,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - win_req_t req; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1497,22 +1430,22 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, window_size = roundup_pow_of_two(window_size); /* Allocate a memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; req.Size = window_size; - req.AccessSpeed = mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; link->resource[3]->end = window_size; + ret = pcmcia_request_window(link, link->resource[3], mem_speed); if (ret) goto failed; offset = (start_pg << 8) + cm_offset; offset -= offset % window_size; - ret = pcmcia_map_mem_page(link, link->win, offset); + ret = pcmcia_map_mem_page(link, link->resource[3], offset); if (ret) goto failed; /* Try scribbling on the buffer */ - info->base = ioremap(req.Base, window_size); + info->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); for (i = 0; i < (TX_PAGES<<8); i += 2) __raw_writew((i>>1), info->base+offset+i); udelay(100); @@ -1521,19 +1454,20 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, pcnet_reset_8390(dev); if (i != (TX_PAGES<<8)) { iounmap(info->base); - pcmcia_release_window(link, link->win); - info->base = NULL; link->win = 0; + pcmcia_release_window(link, link->resource[3]); + info->base = NULL; goto failed; } ei_status.mem = info->base + offset; - ei_status.priv = req.Size; + ei_status.priv = resource_size(link->resource[3]); dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = dev->mem_start + req.Size; + dev->mem_end = dev->mem_start + resource_size(link->resource[3]); ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); + ei_status.stop_page = start_pg + ( + (resource_size(link->resource[3]) - offset) >> 8); /* set up block i/o functions */ ei_status.get_8390_hdr = &shmem_get_8390_hdr; @@ -1772,9 +1706,7 @@ MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { - .drv = { - .name = "pcnet_cs", - }, + .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 377367d03b4..0af2fc8ec16 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -44,7 +44,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -300,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - smc91c92_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int smc91c92_probe(struct pcmcia_device *link) { struct smc_private *smc; @@ -324,10 +315,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -343,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link) return smc91c92_config(link); } /* smc91c92_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void smc91c92_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -412,26 +390,28 @@ static int mhz_3288_power(struct pcmcia_device *link) mdelay(200); /* Now read and write the COR... */ - tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR); + tmp = readb(smc->base + link->config_base + CISREG_COR); udelay(5); - writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR); + writeb(tmp, smc->base + link->config_base + CISREG_COR); return 0; } -static int mhz_mfc_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->io_lines = 16; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[1]->end = 8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; p_dev->resource[0]->start = k ^ 0x300; - p_dev->io_lines = 16; if (!pcmcia_request_io(p_dev)) return 0; } @@ -442,14 +422,11 @@ static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); - win_req_t req; unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->end = 8; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | + CONF_AUTO_SET_IO; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -459,16 +436,16 @@ static int mhz_mfc_config(struct pcmcia_device *link) dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -ENODEV; - smc->base = ioremap(req.Base, req.Size); - offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; - i = pcmcia_map_mem_page(link, link->win, offset); + smc->base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); + offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; + i = pcmcia_map_mem_page(link, link->resource[2], offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) @@ -591,14 +568,12 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ -static int smc_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -607,7 +582,8 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->resource[0]->end = 16; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -640,15 +616,14 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ - link->conf.ConfigIndex = 0x23; link->io_lines = 16; + link->config_index = 0x23; for (i = j = 0; j < 4; j++) { link->resource[1]->start = com[j]; @@ -658,7 +633,7 @@ static int osi_config(struct pcmcia_device *link) } if (i != 0) { /* Fallback: turn off hard decode */ - link->conf.ConfigIndex = 0x03; + link->config_index = 0x03; link->resource[1]->end = 0; i = pcmcia_request_io(link); } @@ -817,27 +792,16 @@ static int check_sig(struct pcmcia_device *link) } if (width) { - modconf_t mod = { - .Attributes = CONF_IO_CHANGE_WIDTH, - }; printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n"); smc91c92_suspend(link); - pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_iowidth(link); smc91c92_resume(link); return check_sig(link); } return -ENODEV; } -/*====================================================================== - - smc91c92_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int smc91c92_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -869,7 +833,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; @@ -988,18 +952,10 @@ config_failed: return -ENODEV; } /* smc91c92_config */ -/*====================================================================== - - After a card is removed, smc91c92_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void smc91c92_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "smc91c92_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); iounmap(smc->base); @@ -2101,9 +2057,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); static struct pcmcia_driver smc91c92_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "smc91c92_cs", - }, + .name = "smc91c92_cs", .probe = smc91c92_probe, .remove = smc91c92_detach, .id_table = smc91c92_ids, diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index f5819526b5e..1fece617c06 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -267,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len); -/* - * The event() function is this driver's Card Services event handler. - * It will be called by Card Services when an appropriate card status - * event is received. The config() and release() entry points are - * used to configure or release a socket, in response to card insertion - * and ejection events. They are invoked from the event handler. - */ - static int has_ce2_string(struct pcmcia_device * link); static int xirc2ps_config(struct pcmcia_device * link); static void xirc2ps_release(struct pcmcia_device * link); - -/**************** - * The attach() and detach() entry points are used to create and destroy - * "instances" of the driver, where each instance represents everything - * needed to manage one actual PCMCIA card. - */ - static void xirc2ps_detach(struct pcmcia_device *p_dev); -/**************** - * You'll also need to prototype all the functions that will actually - * be used to talk to your device. See 'pcmem_cs' for a good example - * of a fully self-sufficient driver; the other drivers rely more or - * less on other parts of the kernel. - */ - static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); typedef struct local_info_t { @@ -501,16 +478,6 @@ static const struct net_device_ops netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/**************** - * xirc2ps_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ - static int xirc2ps_probe(struct pcmcia_device *link) { @@ -529,9 +496,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_index = 1; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -542,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link) return xirc2ps_config(link); } /* xirc2ps_attach */ -/**************** - * This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void xirc2ps_detach(struct pcmcia_device *link) { @@ -667,44 +625,53 @@ has_ce2_string(struct pcmcia_device * p_dev) } static int -xirc2ps_config_modem(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) { unsigned int ioaddr; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = ioaddr; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } static int -xirc2ps_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) { int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = p_dev->resource[1]->start - + (*pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); } @@ -727,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, }; -/**************** - * xirc2ps_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * ethernet device available to the system. - */ static int xirc2ps_config(struct pcmcia_device * link) { @@ -807,32 +769,24 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->io_lines = 10; if (local->modem) { int pass; + link->config_flags |= CONF_AUTO_SET_IO; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status |= CCSR_AUDIO_ENA; - } - link->resource[1]->end = 8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ for (pass=0; pass < 2; pass++) - if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) + if (!pcmcia_loop_config(link, xirc2ps_config_check, + &pass)) goto port_found; /* if special option: * try to configure as Ethernet only. @@ -840,7 +794,9 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { + link->io_lines = 10; link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->resource[0]->start = ioaddr; if (!(err = pcmcia_request_io(link))) @@ -861,16 +817,14 @@ xirc2ps_config(struct pcmcia_device * link) if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; - /**************** - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { - win_req_t req; - /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, * the base address of the ethernet port (BasePort1) is written @@ -890,14 +844,14 @@ xirc2ps_config(struct pcmcia_device * link) * is at 0x0800. So we allocate a window into the attribute * memory and write direct to the CIS registers */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - if ((err = pcmcia_request_window(link, &req, &link->win))) + link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + if ((err = pcmcia_request_window(link, link->resource[2], 0))) goto config_error; - local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - if ((err = pcmcia_map_mem_page(link, link->win, 0))) + local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; + if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet @@ -978,17 +932,12 @@ xirc2ps_config(struct pcmcia_device * link) return -ENODEV; } /* xirc2ps_config */ -/**************** - * After a card is removed, xirc2ps_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void xirc2ps_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); if (local->dingo) @@ -1830,9 +1779,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); static struct pcmcia_driver xirc2ps_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "xirc2ps_cs", - }, + .name = "xirc2ps_cs", .probe = xirc2ps_probe, .remove = xirc2ps_detach, .id_table = xirc2ps_ids, diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index af50a530dae..78d70a6481b 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -184,7 +184,7 @@ ppp_asynctty_open(struct tty_struct *tty) tasklet_init(&ap->tsk, ppp_async_process, (unsigned long) ap); atomic_set(&ap->refcnt, 1); - init_MUTEX_LOCKED(&ap->dead_sem); + sema_init(&ap->dead_sem, 0); ap->chan.private = ap; ap->chan.ops = &async_ops; diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 10cf0cbc218..726df611ee1 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -72,6 +72,7 @@ static const char version[] = #include <linux/sched.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/errno.h> #include <linux/ioport.h> #include <linux/crc32.h> diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 04c6cd4333f..10bafd59f9c 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -575,7 +575,7 @@ static int cosa_probe(int base, int irq, int dma) /* Initialize the chardev data structures */ mutex_init(&chan->rlock); - init_MUTEX(&chan->wsem); + sema_init(&chan->wsem, 1); /* Register the network interface */ if (!(chan->netdev = alloc_hdlcdev(chan))) { diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9a121a5b787..df2484d4547 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include <linux/timer.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -54,58 +53,21 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the airo_cs - event handler. -*/ - static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - airo_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -117,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev) return airo_config(p_dev); } /* airo_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); @@ -140,60 +93,12 @@ static void airo_detach(struct pcmcia_device *link) kfree(link->priv); } /* airo_detach */ -/*====================================================================== - - airo_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - -static int airo_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -206,20 +111,9 @@ static int airo_config(struct pcmcia_device *link) dev_dbg(&link->dev, "airo_config\n"); - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; @@ -227,12 +121,7 @@ static int airo_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = @@ -241,17 +130,6 @@ static int airo_config(struct pcmcia_device *link) if (!((local_info_t *)link->priv)->eth_dev) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); return 0; failed: @@ -259,14 +137,6 @@ static int airo_config(struct pcmcia_device *link) return -ENODEV; } /* airo_config */ -/*====================================================================== - - After a card is removed, airo_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); @@ -305,9 +175,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids); static struct pcmcia_driver airo_driver = { .owner = THIS_MODULE, - .drv = { - .name = "airo_cs", - }, + .name = "airo_cs", .probe = airo_probe, .remove = airo_detach, .id_table = airo_ids, @@ -315,12 +183,12 @@ static struct pcmcia_driver airo_driver = { .resume = airo_resume, }; -static int airo_cs_init(void) +static int __init airo_cs_init(void) { return pcmcia_register_driver(&airo_driver); } -static void airo_cs_cleanup(void) +static void __exit airo_cs_cleanup(void) { pcmcia_unregister_driver(&airo_driver); } diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3b632161c10..c96e19da294 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include <linux/moduleparam.h> #include <linux/device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,58 +63,21 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the atmel_cs - event handler. -*/ - static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - atmel_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -127,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) return atmel_config(p_dev); } /* atmel_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); @@ -145,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link) kfree(link->priv); } -/*====================================================================== - - atmel_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -165,47 +110,11 @@ static int card_present(void *arg) return 0; } -static int atmel_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -220,18 +129,9 @@ static int atmel_config(struct pcmcia_device *link) dev_dbg(&link->dev, "atmel_config\n"); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; @@ -240,12 +140,7 @@ static int atmel_config(struct pcmcia_device *link) goto failed; } - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -267,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - After a card is removed, atmel_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; @@ -353,9 +240,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { .owner = THIS_MODULE, - .drv = { - .name = "atmel_cs", - }, + .name = "atmel_cs", .probe = atmel_probe, .remove = atmel_detach, .id_table = atmel_ids, @@ -363,12 +248,12 @@ static struct pcmcia_driver atmel_driver = { .resume = atmel_resume, }; -static int atmel_cs_init(void) +static int __init atmel_cs_init(void) { return pcmcia_register_driver(&atmel_driver); } -static void atmel_cs_cleanup(void) +static void __exit atmel_cs_cleanup(void) { pcmcia_unregister_driver(&atmel_driver); } diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index dfbc41d431f..7dcba5fafdc 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include <linux/ssb/ssb.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -63,7 +62,6 @@ static int b43_pcmcia_resume(struct pcmcia_device *dev) static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) { struct ssb_bus *ssb; - win_req_t win; int err = -ENOMEM; int res = 0; @@ -73,30 +71,28 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; - dev->conf.Attributes = CONF_ENABLE_IRQ; - dev->conf.IntType = INT_MEMORY_AND_IO; + dev->config_flags |= CONF_ENABLE_IRQ; - win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 | + dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; - win.Base = 0; - win.Size = SSB_CORE_SIZE; - win.AccessSpeed = 250; - res = pcmcia_request_window(dev, &win, &dev->win); + dev->resource[2]->start = 0; + dev->resource[2]->end = SSB_CORE_SIZE; + res = pcmcia_request_window(dev, dev->resource[2], 250); if (res != 0) goto err_kfree_ssb; - res = pcmcia_map_mem_page(dev, dev->win, 0); + res = pcmcia_map_mem_page(dev, dev->resource[2], 0); if (res != 0) goto err_disable; if (!dev->irq) goto err_disable; - res = pcmcia_request_configuration(dev, &dev->conf); + res = pcmcia_enable_device(dev); if (res != 0) goto err_disable; - err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); + err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start); if (err) goto err_disable; dev->priv = ssb; @@ -125,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev) static struct pcmcia_driver b43_pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = "b43-pcmcia", - }, + .name = "b43-pcmcia", .id_table = b43_pcmcia_tbl, .probe = b43_pcmcia_probe, .remove = __devexit_p(b43_pcmcia_remove), diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b04d2..bd8a4134ede 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include <linux/wireless.h> #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -437,7 +436,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev) int ret; PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - p_dev->conf.IntType = INT_MEMORY_AND_IO; ret = prism2_config(p_dev); if (ret) { @@ -468,74 +466,11 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - -static int prism2_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt->index); - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" - " this entry\n"); - return -ENODEV; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " - "- skipping this entry\n"); - return -ENODEV; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt->io.nwin=%d\n", - cfg->io.nwin, dflt->io.nwin); - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -557,6 +492,10 @@ static int prism2_config(struct pcmcia_device *link) } /* Look for an appropriate configuration table entry in the CIS */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, prism2_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -588,12 +527,7 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; @@ -602,20 +536,6 @@ static int prism2_config(struct pcmcia_device *link) spin_unlock_irqrestore(&local->irq_init_lock, flags); - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev_info, link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp / 10, - link->conf.Vpp % 10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - local->shutdown = 0; sandisk_enable_wireless(dev); @@ -627,7 +547,7 @@ static int prism2_config(struct pcmcia_device *link) return ret; failed_unlock: - spin_unlock_irqrestore(&local->irq_init_lock, flags); + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); @@ -779,9 +699,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); static struct pcmcia_driver hostap_driver = { - .drv = { - .name = "hostap_cs", - }, + .name = "hostap_cs", .probe = hostap_cs_probe, .remove = prism2_detach, .owner = THIS_MODULE, diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 9c298396be5..ff1280f4133 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include <linux/firmware.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -761,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv, } -/********************************************************************/ -/* Card Services */ -/********************************************************************/ - -/* - * After a card is removed, if_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -785,31 +775,12 @@ static void if_cs_release(struct pcmcia_device *p_dev) } -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. - */ - -static int if_cs_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - /* IO window settings */ - if (cfg->io.nwin != 1) { + if (p_dev->resource[1]->end) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); return -ENODEV; } @@ -835,15 +806,13 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of @@ -861,14 +830,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; } - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) { - lbs_pr_err("error in pcmcia_request_configuration\n"); + lbs_pr_err("error in pcmcia_enable_device\n"); goto out2; } @@ -962,12 +926,6 @@ out: } -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -1000,9 +958,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); static struct pcmcia_driver lbs_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .probe = if_cs_probe, .remove = if_cs_detach, .id_table = if_cs_ids, diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d8853..71b3d68b940 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -93,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -117,23 +108,9 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -145,76 +122,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -225,20 +138,10 @@ orinoco_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -262,12 +165,7 @@ orinoco_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -291,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { @@ -344,12 +237,6 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ @@ -441,9 +328,7 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, @@ -454,8 +339,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_orinoco_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 873877e17e1..fb859a5ad2e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -154,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { @@ -179,23 +170,9 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -207,76 +184,13 @@ static void spectrum_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -287,20 +201,10 @@ spectrum_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -325,12 +229,7 @@ spectrum_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -358,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link) return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { @@ -407,12 +301,6 @@ spectrum_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au>, et al)"; - static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ @@ -423,9 +311,7 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = spectrum_cs_probe, .remove = spectrum_cs_detach, .suspend = spectrum_cs_suspend, @@ -436,8 +322,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_spectrum_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88560d0ae50..af5b17ce5a1 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include <linux/ethtool.h> #include <linux/ieee80211.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -169,13 +168,6 @@ static int bc; */ static char *phy_addr = NULL; - -/* A struct pcmcia_device structure has fields for most things that are needed - to keep track of a socket, but there will usually be some device - specific information that also needs to be kept track of. The - 'priv' pointer in a struct pcmcia_device structure can be used to point to - a device-specific private data structure, like this. -*/ static unsigned int ray_mem_speed = 500; /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ @@ -290,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*============================================================================= - ray_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -=============================================================================*/ static int ray_probe(struct pcmcia_device *p_dev) { ray_dev_t *local; @@ -318,9 +302,8 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->config_index = 1; p_dev->priv = dev; @@ -353,12 +336,6 @@ fail_alloc_dev: return -ENOMEM; } /* ray_attach */ -/*============================================================================= - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -=============================================================================*/ static void ray_detach(struct pcmcia_device *link) { struct net_device *dev; @@ -381,17 +358,11 @@ static void ray_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "ray_cs ray_detach ending\n"); } /* ray_detach */ -/*============================================================================= - ray_config() is run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -=============================================================================*/ #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { int ret = 0; int i; - win_req_t req; struct net_device *dev = (struct net_device *)link->priv; ray_dev_t *local = netdev_priv(dev); @@ -412,54 +383,50 @@ static int ray_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - /* This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /*** Set up 32k window for shared memory (transmit and control) ************/ - req.Attributes = - WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x8000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x8000; + ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, 0); + ret = pcmcia_map_mem_page(link, link->resource[2], 0); if (ret) goto failed; - local->sram = ioremap(req.Base, req.Size); + local->sram = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /*** Set up 16k window for shared memory (receive buffer) ***************/ - req.Attributes = + link->resource[3]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x4000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->rmem_handle); + link->resource[3]->start = 0; + link->resource[3]->end = 0x4000; + ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000); + ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000); if (ret) goto failed; - local->rmem = ioremap(req.Base, req.Size); + local->rmem = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); /*** Set up window for attribute memory ***********************************/ - req.Attributes = + link->resource[4]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x1000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->amem_handle); + link->resource[4]->start = 0; + link->resource[4]->end = 0x1000; + ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->amem_handle, 0); + ret = pcmcia_map_mem_page(link, link->resource[4], 0); if (ret) goto failed; - local->amem = ioremap(req.Base, req.Size); + local->amem = ioremap(link->resource[4]->start, + resource_size(link->resource[4])); dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram); dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem); @@ -775,11 +742,7 @@ static void join_net(u_long data) local->card_status = CARD_DOING_ACQ; } -/*============================================================================ - After a card is removed, ray_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -=============================================================================*/ + static void ray_release(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -2847,9 +2810,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids); static struct pcmcia_driver ray_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ray_cs", - }, + .name = "ray_cs", .probe = ray_probe, .remove = ray_detach, .id_table = ray_ids, diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h index 9f01ddb1974..e79848fbcca 100644 --- a/drivers/net/wireless/ray_cs.h +++ b/drivers/net/wireless/ray_cs.h @@ -25,8 +25,6 @@ struct beacon_rx { typedef struct ray_dev_t { int card_status; int authentication_state; - window_handle_t amem_handle; /* handle to window for attribute memory */ - window_handle_t rmem_handle; /* handle to window for rx buffer on card */ void __iomem *sram; /* pointer to beginning of shared RAM */ void __iomem *amem; /* pointer to attribute mem window */ void __iomem *rmem; /* pointer to receive buffer window */ diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a1cc2d498a1..ca3f8961fa2 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -78,13 +77,6 @@ #define WL3501_RESUME 0 #define WL3501_SUSPEND 1 -/* - * The event() function is this driver's Card Services event handler. It will - * be called by Card Services when an appropriate card status event is - * received. The config() and release() entry points are used to configure or - * release a socket, in response to card insertion and ejection events. They - * are invoked from the wl24 event handler. - */ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); @@ -1869,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/** - * wl3501_attach - creates an "instance" of the driver - * - * Creates an "instance" of the driver, allocating local data structures for - * one device. The device is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually configure the - * card at this point -- we wait until we receive a card insertion event. - */ static int wl3501_probe(struct pcmcia_device *p_dev) { struct net_device *dev; @@ -1888,9 +1871,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags = CONF_ENABLE_IRQ; + p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); if (!dev) @@ -1914,14 +1896,6 @@ out_link: return -ENOMEM; } -/** - * wl3501_config - configure the PCMCIA socket and make eth device available - * @link - FILL_IN - * - * wl3501_config() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - */ static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1952,10 +1926,7 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - /* This actually configures the PCMCIA socket -- setting up the I/O - * windows and the interrupt mapping. */ - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -2010,14 +1981,6 @@ failed: return -ENODEV; } -/** - * wl3501_release - unregister the net, release PCMCIA configuration - * @arg - link - * - * After a card is removed, wl3501_release() will unregister the net device, - * and release the PCMCIA configuration. If the device is still open, this - * will be postponed until it is closed. - */ static void wl3501_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -2056,9 +2019,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids); static struct pcmcia_driver wl3501_driver = { .owner = THIS_MODULE, - .drv = { - .name = "wl3501_cs", - }, + .name = "wl3501_cs", .probe = wl3501_probe, .remove = wl3501_detach, .id_table = wl3501_ids, |