diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/stmmac/Kconfig | 53 | ||||
| -rw-r--r-- | drivers/net/stmmac/Makefile | 4 | ||||
| -rw-r--r-- | drivers/net/stmmac/common.h | 330 | ||||
| -rw-r--r-- | drivers/net/stmmac/descs.h | 163 | ||||
| -rw-r--r-- | drivers/net/stmmac/gmac.c | 693 | ||||
| -rw-r--r-- | drivers/net/stmmac/gmac.h | 204 | ||||
| -rw-r--r-- | drivers/net/stmmac/mac100.c | 517 | ||||
| -rw-r--r-- | drivers/net/stmmac/mac100.h | 116 | ||||
| -rw-r--r-- | drivers/net/stmmac/stmmac.h | 98 | ||||
| -rw-r--r-- | drivers/net/stmmac/stmmac_ethtool.c | 395 | ||||
| -rw-r--r-- | drivers/net/stmmac/stmmac_main.c | 2204 | ||||
| -rw-r--r-- | drivers/net/stmmac/stmmac_mdio.c | 217 | ||||
| -rw-r--r-- | drivers/net/stmmac/stmmac_timer.c | 140 | ||||
| -rw-r--r-- | drivers/net/stmmac/stmmac_timer.h | 41 |
16 files changed, 5178 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f520e3ae194..ce2eba17386 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2483,6 +2483,8 @@ config S6GMAC To compile this driver as a module, choose M here. The module will be called s6gmac. +source "drivers/net/stmmac/Kconfig" + endif # NETDEV_1000 # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fc6c8bb92c5..246323d7f16 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -100,6 +100,7 @@ obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_SH_ETH) += sh_eth.o +obj-$(CONFIG_STMMAC_ETH) += stmmac/ # # end link order section diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig new file mode 100644 index 00000000000..35eaa5251d7 --- /dev/null +++ b/drivers/net/stmmac/Kconfig @@ -0,0 +1,53 @@ +config STMMAC_ETH + tristate "STMicroelectronics 10/100/1000 Ethernet driver" + select MII + select PHYLIB + depends on NETDEVICES && CPU_SUBTYPE_ST40 + help + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet + controllers. ST Ethernet IPs are built around a Synopsys IP Core. + +if STMMAC_ETH + +config STMMAC_DA + bool "STMMAC DMA arbitration scheme" + default n + help + Selecting this option, rx has priority over Tx (only for Giga + Ethernet device). + By default, the DMA arbitration scheme is based on Round-robin + (rx:tx priority is 1:1). + +config STMMAC_DUAL_MAC + bool "STMMAC: dual mac support (EXPERIMENTAL)" + default n + depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER + help + Some ST SoCs (for example the stx7141 and stx7200c2) have two + Ethernet Controllers. This option turns on the second Ethernet + device on this kind of platforms. + +config STMMAC_TIMER + bool "STMMAC Timer optimisation" + default n + help + Use an external timer for mitigating the number of network + interrupts. + +choice + prompt "Select Timer device" + depends on STMMAC_TIMER + +config STMMAC_TMU_TIMER + bool "TMU channel 2" + depends on CPU_SH4 + help + +config STMMAC_RTC_TIMER + bool "Real time clock" + depends on RTC_CLASS + help + +endchoice + +endif diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile new file mode 100644 index 00000000000..b2d7a5564df --- /dev/null +++ b/drivers/net/stmmac/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_STMMAC_ETH) += stmmac.o +stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o +stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \ + mac100.o gmac.o $(stmmac-y) diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h new file mode 100644 index 00000000000..e49e5188e88 --- /dev/null +++ b/drivers/net/stmmac/common.h @@ -0,0 +1,330 @@ +/******************************************************************************* + STMMAC Common Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include "descs.h" +#include <linux/io.h> + +/* ********************************************* + DMA CRS Control and Status Register Mapping + * *********************************************/ +#define DMA_BUS_MODE 0x00001000 /* Bus Mode */ +#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ +#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */ +#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */ +#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */ +#define DMA_STATUS 0x00001014 /* Status Register */ +#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */ +#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */ +#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */ +#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */ +#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */ + +/* ******************************** + DMA Control register defines + * ********************************/ +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ + +/* ************************************** + DMA Interrupt Enable register defines + * **************************************/ +/**** NORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */ +#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */ +#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */ +#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */ + +#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \ + DMA_INTR_ENA_TIE) + +/**** ABNORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */ +#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */ +#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */ +#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */ +#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */ +#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */ +#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */ +#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */ +#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */ + +#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \ + DMA_INTR_ENA_UNE) + +/* DMA default interrupt mask */ +#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL) + +/* **************************** + * DMA Status register defines + * ****************************/ +#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */ +#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */ +#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */ +#define DMA_STATUS_GMI 0x08000000 +#define DMA_STATUS_GLI 0x04000000 +#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */ +#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */ +#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */ +#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */ +#define DMA_STATUS_TS_SHIFT 20 +#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */ +#define DMA_STATUS_RS_SHIFT 17 +#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */ +#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */ +#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */ +#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */ +#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */ +#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */ +#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */ +#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */ +#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */ +#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */ +#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */ +#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */ +#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */ + +/* Other defines */ +#define HASH_TABLE_SIZE 64 +#define PAUSE_TIME 0x200 + +/* Flow Control defines */ +#define FLOW_OFF 0 +#define FLOW_RX 1 +#define FLOW_TX 2 +#define FLOW_AUTO (FLOW_TX | FLOW_RX) + +/* DMA STORE-AND-FORWARD Operation Mode */ +#define SF_DMA_MODE 1 + +#define HW_CSUM 1 +#define NO_HW_CSUM 0 + +/* GMAC TX FIFO is 8K, Rx FIFO is 16K */ +#define BUF_SIZE_16KiB 16384 +#define BUF_SIZE_8KiB 8192 +#define BUF_SIZE_4KiB 4096 +#define BUF_SIZE_2KiB 2048 + +/* Power Down and WOL */ +#define PMT_NOT_SUPPORTED 0 +#define PMT_SUPPORTED 1 + +/* Common MAC defines */ +#define MAC_CTRL_REG 0x00000000 /* MAC Control */ +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ +#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */ + +/* MAC Management Counters register */ +#define MMC_CONTROL 0x00000100 /* MMC Control */ +#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */ +#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */ +#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */ +#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */ + +#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */ +#define MMC_CONTROL_MAX_FRM_SHIFT 3 +#define MMC_CONTROL_MAX_FRAME 0x7FF + +struct stmmac_extra_stats { + /* Transmit errors */ + unsigned long tx_underflow ____cacheline_aligned; + unsigned long tx_carrier; + unsigned long tx_losscarrier; + unsigned long tx_heartbeat; + unsigned long tx_deferred; + unsigned long tx_vlan; + unsigned long tx_jabber; + unsigned long tx_frame_flushed; + unsigned long tx_payload_error; + unsigned long tx_ip_header_error; + /* Receive errors */ + unsigned long rx_desc; + unsigned long rx_partial; + unsigned long rx_runt; + unsigned long rx_toolong; + unsigned long rx_collision; + unsigned long rx_crc; + unsigned long rx_lenght; + unsigned long rx_mii; + unsigned long rx_multicast; + unsigned long rx_gmac_overflow; + unsigned long rx_watchdog; + unsigned long da_rx_filter_fail; + unsigned long sa_rx_filter_fail; + unsigned long rx_missed_cntr; + unsigned long rx_overflow_cntr; + unsigned long rx_vlan; + /* Tx/Rx IRQ errors */ + unsigned long tx_undeflow_irq; + unsigned long tx_process_stopped_irq; + unsigned long tx_jabber_irq; + unsigned long rx_overflow_irq; + unsigned long rx_buf_unav_irq; + unsigned long rx_process_stopped_irq; + unsigned long rx_watchdog_irq; + unsigned long tx_early_irq; + unsigned long fatal_bus_error_irq; + /* Extra info */ + unsigned long threshold; + unsigned long tx_pkt_n; + unsigned long rx_pkt_n; + unsigned long poll_n; + unsigned long sched_timer_n; + unsigned long normal_irq_n; +}; + +/* GMAC core can compute the checksums in HW. */ +enum rx_frame_status { + good_frame = 0, + discard_frame = 1, + csum_none = 2, +}; + +static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6], + unsigned int high, unsigned int low) +{ + unsigned long data; + + data = (addr[5] << 8) | addr[4]; + writel(data, ioaddr + high); + data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + writel(data, ioaddr + low); + + return; +} + +static inline void stmmac_get_mac_addr(unsigned long ioaddr, + unsigned char *addr, unsigned int high, + unsigned int low) +{ + unsigned int hi_addr, lo_addr; + + /* Read the MAC address from the hardware */ + hi_addr = readl(ioaddr + high); + lo_addr = readl(ioaddr + low); + + /* Extract the MAC address from the high and low words */ + addr[0] = lo_addr & 0xff; + addr[1] = (lo_addr >> 8) & 0xff; + addr[2] = (lo_addr >> 16) & 0xff; + addr[3] = (lo_addr >> 24) & 0xff; + addr[4] = hi_addr & 0xff; + addr[5] = (hi_addr >> 8) & 0xff; + + return; +} + +struct stmmac_ops { + /* MAC core initialization */ + void (*core_init) (unsigned long ioaddr) ____cacheline_aligned; + /* DMA core initialization */ + int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx); + /* Dump MAC registers */ + void (*dump_mac_regs) (unsigned long ioaddr); + /* Dump DMA registers */ + void (*dump_dma_regs) (unsigned long ioaddr); + /* Set tx/rx threshold in the csr6 register + * An invalid value enables the store-and-forward mode */ + void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode); + /* To track extra statistic (if supported) */ + void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr); + /* RX descriptor ring initialization */ + void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic); + /* TX descriptor ring initialization */ + void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size); + + /* Invoked by the xmit function to prepare the tx descriptor */ + void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len, + int csum_flag); + /* Set/get the owner of the descriptor */ + void (*set_tx_owner) (struct dma_desc *p); + int (*get_tx_owner) (struct dma_desc *p); + /* Invoked by the xmit function to close the tx descriptor */ + void (*close_tx_desc) (struct dma_desc *p); + /* Clean the tx descriptor as soon as the tx irq is received */ + void (*release_tx_desc) (struct dma_desc *p); + /* Clear interrupt on tx frame completion. When this bit is + * set an interrupt happens as soon as the frame is transmitted */ + void (*clear_tx_ic) (struct dma_desc *p); + /* Last tx segment reports the transmit status */ + int (*get_tx_ls) (struct dma_desc *p); + /* Return the transmit status looking at the TDES1 */ + int (*tx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr); + /* Get the buffer size from the descriptor */ + int (*get_tx_len) (struct dma_desc *p); + /* Handle extra events on specific interrupts hw dependent */ + void (*host_irq_status) (unsigned long ioaddr); + int (*get_rx_owner) (struct dma_desc *p); + void (*set_rx_owner) (struct dma_desc *p); + /* Get the receive frame size */ + int (*get_rx_frame_len) (struct dma_desc *p); + /* Return the reception status looking at the RDES1 */ + int (*rx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p); + /* Multicast filter setting */ + void (*set_filter) (struct net_device *dev); + /* Flow control setting */ + void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time); + /* Set power management mode (e.g. magic frame) */ + void (*pmt) (unsigned long ioaddr, unsigned long mode); + /* Set/Get Unicast MAC addresses */ + void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); + void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); +}; + +struct mac_link { + int port; + int duplex; + int speed; +}; + +struct mii_regs { + unsigned int addr; /* MII Address */ + unsigned int data; /* MII Data */ +}; + +struct hw_cap { + unsigned int version; /* Core Version register (GMAC) */ + unsigned int pmt; /* Power-Down mode (GMAC) */ + struct mac_link link; + struct mii_regs mii; +}; + +struct mac_device_info { + struct hw_cap hw; + struct stmmac_ops *ops; +}; + +struct mac_device_info *gmac_setup(unsigned long addr); +struct mac_device_info *mac100_setup(unsigned long addr); diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h new file mode 100644 index 00000000000..6d2a0b2f5e5 --- /dev/null +++ b/drivers/net/stmmac/descs.h @@ -0,0 +1,163 @@ +/******************************************************************************* + Header File to describe the DMA descriptors + Use enhanced descriptors in case of GMAC Cores. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ +struct dma_desc { + /* Receive descriptor */ + union { + struct { + /* RDES0 */ + u32 reserved1:1; + u32 crc_error:1; + u32 dribbling:1; + u32 mii_error:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 collision:1; + u32 frame_too_long:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 multicast_frame:1; + u32 run_frame:1; + u32 length_error:1; + u32 partial_frame_error:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 filtering_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved2:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 reserved3:5; + u32 disable_ic:1; + } rx; + struct { + /* RDES0 */ + u32 payload_csum_error:1; + u32 crc_error:1; + u32 dribbling:1; + u32 error_gmii:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 late_collision:1; + u32 ipc_csum_error:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 vlan_tag:1; + u32 overflow_error:1; + u32 length_error:1; + u32 sa_filter_fail:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 da_filter_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:13; + u32 reserved1:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 buffer2_size:13; + u32 reserved2:2; + u32 disable_ic:1; + } erx; /* -- enhanced -- */ + + /* Transmit descriptor */ + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 heartbeat_fail:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 reserved1:3; + u32 error_summary:1; + u32 reserved2:15; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved3:1; + u32 disable_padding:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 crc_disable:1; + u32 reserved4:2; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + } tx; + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 vlan_frame:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 payload_error:1; + u32 frame_flushed:1; + u32 jabber_timeout:1; + u32 error_summary:1; + u32 ip_header_error:1; + u32 time_stamp_status:1; + u32 reserved1:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 checksum_insertion:2; + u32 reserved2:1; + u32 time_stamp_enable:1; + u32 disable_padding:1; + u32 crc_disable:1; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:13; + u32 reserved3:3; + u32 buffer2_size:13; + u32 reserved4:3; + } etx; /* -- enhanced -- */ + } des01; + unsigned int des2; + unsigned int des3; +}; + +/* Transmit checksum insertion control */ +enum tdes_csum_insertion { + cic_disabled = 0, /* Checksum Insertion Control */ + cic_only_ip = 1, /* Only IP header */ + cic_no_pseudoheader = 2, /* IP header but pseudoheader + * is not calculated */ + cic_full = 3, /* IP header and pseudoheader */ +}; diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c new file mode 100644 index 00000000000..b624bb5bae0 --- /dev/null +++ b/drivers/net/stmmac/gmac.c @@ -0,0 +1,693 @@ +/******************************************************************************* + This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. + DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for + developing this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" +#include "gmac.h" + +#undef GMAC_DEBUG +/*#define GMAC_DEBUG*/ +#undef FRAME_FILTER_DEBUG +/*#define FRAME_FILTER_DEBUG*/ +#ifdef GMAC_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void gmac_dump_regs(unsigned long ioaddr) +{ + int i; + pr_info("\t----------------------------------------------\n" + "\t GMAC registers (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + + for (i = 0; i < 55; i++) { + int offset = i * 4; + pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i, + offset, readl(ioaddr + offset)); + } + return; +} + +static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL | + ((pbl << DMA_BUS_MODE_PBL_SHIFT) | + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + +#ifdef CONFIG_STMMAC_DA + value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */ +#endif + writel(value, ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Transmit FIFO flush operation */ +static void gmac_flush_tx_fifo(unsigned long ioaddr) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL); + + do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF)); +} + +static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n"); + /* Transmit COE type 2 cannot be done in cut-through mode. */ + csr6 |= DMA_CONTROL_TSF; + /* Operating on second frame increase the performance + * especially when transmit store-and-forward is used.*/ + csr6 |= DMA_CONTROL_OSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode" + " (threshold = %d)\n", txmode); + csr6 &= ~DMA_CONTROL_TSF; + csr6 &= DMA_CONTROL_TC_TX_MASK; + /* Set the transmit threashold */ + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else if (txmode <= 128) + csr6 |= DMA_CONTROL_TTC_128; + else if (txmode <= 192) + csr6 |= DMA_CONTROL_TTC_192; + else + csr6 |= DMA_CONTROL_TTC_256; + } + + if (rxmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n"); + csr6 |= DMA_CONTROL_RSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode" + " (threshold = %d)\n", rxmode); + csr6 &= ~DMA_CONTROL_RSF; + csr6 &= DMA_CONTROL_TC_RX_MASK; + if (rxmode <= 32) + csr6 |= DMA_CONTROL_RTC_32; + else if (rxmode <= 64) + csr6 |= DMA_CONTROL_RTC_64; + else if (rxmode <= 96) + csr6 |= DMA_CONTROL_RTC_96; + else + csr6 |= DMA_CONTROL_RTC_128; + } + + writel(csr6, ioaddr + DMA_CONTROL); + return; +} + +/* Not yet implemented --- no RMON module */ +static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + return; +} + +static void gmac_dump_dma_regs(unsigned long ioaddr) +{ + int i; + pr_info(" DMA registers\n"); + for (i = 0; i < 22; i++) { + if ((i < 9) || (i > 17)) { + int offset = i * 4; + pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + offset), + readl(ioaddr + DMA_BUS_MODE + offset)); + } + } + return; +} + +static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.etx.error_summary)) { + DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx); + if (unlikely(p->des01.etx.jabber_timeout)) { + DBG(KERN_ERR "\tjabber_timeout error\n"); + x->tx_jabber++; + } + + if (unlikely(p->des01.etx.frame_flushed)) { + DBG(KERN_ERR "\tframe_flushed error\n"); + x->tx_frame_flushed++; + gmac_flush_tx_fifo(ioaddr); + } + + if (unlikely(p->des01.etx.loss_carrier)) { + DBG(KERN_ERR "\tloss_carrier error\n"); + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.no_carrier)) { + DBG(KERN_ERR "\tno_carrier error\n"); + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_collisions)) { + DBG(KERN_ERR "\texcessive_collisions\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_deferral)) { + DBG(KERN_INFO "\texcessive tx_deferral\n"); + x->tx_deferred++; + } + + if (unlikely(p->des01.etx.underflow_error)) { + DBG(KERN_ERR "\tunderflow error\n"); + gmac_flush_tx_fifo(ioaddr); + x->tx_underflow++; + } + + if (unlikely(p->des01.etx.ip_header_error)) { + DBG(KERN_ERR "\tTX IP header csum error\n"); + x->tx_ip_header_error++; + } + + if (unlikely(p->des01.etx.payload_error)) { + DBG(KERN_ERR "\tAddr/Payload csum error\n"); + x->tx_payload_error++; + gmac_flush_tx_fifo(ioaddr); + } + + ret = -1; + } + + if (unlikely(p->des01.etx.deferred)) { + DBG(KERN_INFO "GMAC TX status: tx deferred\n"); + x->tx_deferred++; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.etx.vlan_frame) { + DBG(KERN_INFO "GMAC TX status: VLAN frame\n"); + x->tx_vlan++; + } +#endif + + return ret; +} + +static int gmac_get_tx_len(struct dma_desc *p) +{ + return p->des01.etx.buffer1_size; +} + +static int gmac_coe_rdes0(int ipc_err, int type, int payload_err) +{ + int ret = good_frame; + u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7; + + /* bits 5 7 0 | Frame status + * ---------------------------------------------------------- + * 0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects) + * 1 0 0 | IPv4/6 No CSUM errorS. + * 1 0 1 | IPv4/6 CSUM PAYLOAD error + * 1 1 0 | IPv4/6 CSUM IP HR error + * 1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS + * 0 0 1 | IPv4/6 unsupported IP PAYLOAD + * 0 1 1 | COE bypassed.. no IPv4/6 frame + * 0 1 0 | Reserved. + */ + if (status == 0x0) { + DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n"); + ret = good_frame; + } else if (status == 0x4) { + DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n"); + ret = good_frame; + } else if (status == 0x5) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n"); + ret = csum_none; + } else if (status == 0x6) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n"); + ret = csum_none; + } else if (status == 0x7) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 Header and Payload Error.\n"); + ret = csum_none; + } else if (status == 0x1) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n"); + ret = discard_frame; + } else if (status == 0x3) { + DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n"); + ret = discard_frame; + } + return ret; +} + +static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = good_frame; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.erx.error_summary)) { + DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx); + if (unlikely(p->des01.erx.descriptor_error)) { + DBG(KERN_ERR "\tdescriptor error\n"); + x->rx_desc++; + stats->rx_length_errors++; + } + if (unlikely(p->des01.erx.overflow_error)) { + DBG(KERN_ERR "\toverflow error\n"); + x->rx_gmac_overflow++; + } + + if (unlikely(p->des01.erx.ipc_csum_error)) + DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n"); + + if (unlikely(p->des01.erx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions++; + stats->collisions++; + } + if (unlikely(p->des01.erx.receive_watchdog)) { + DBG(KERN_ERR "\treceive_watchdog error\n"); + x->rx_watchdog++; + } + if (unlikely(p->des01.erx.error_gmii)) { + DBG(KERN_ERR "\tReceive Error\n"); + x->rx_mii++; + } + if (unlikely(p->des01.erx.crc_error)) { + DBG(KERN_ERR "\tCRC error\n"); + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + + /* After a payload csum error, the ES bit is set. + * It doesn't match with the information reported into the databook. + * At any rate, we need to understand if the CSUM hw computation is ok + * and report this info to the upper layers. */ + ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error, + p->des01.erx.frame_type, p->des01.erx.payload_csum_error); + + if (unlikely(p->des01.erx.dribbling)) { + DBG(KERN_ERR "GMAC RX: dribbling error\n"); + ret = discard_frame; + } + if (unlikely(p->des01.erx.sa_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Source Address filter fail\n"); + x->sa_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.da_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n"); + x->da_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.length_error)) { + DBG(KERN_ERR "GMAC RX: length_error error\n"); + x->rx_lenght++; + ret = discard_frame; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.erx.vlan_tag) { + DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n"); + x->rx_vlan++; + } +#endif + return ret; +} + +static void gmac_irq_status(unsigned long ioaddr) +{ + u32 intr_status = readl(ioaddr + GMAC_INT_STATUS); + + /* Not used events (e.g. MMC interrupts) are not handled. */ + if ((intr_status & mmc_tx_irq)) + DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_TX_INTR)); + if (unlikely(intr_status & mmc_rx_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_INTR)); + if (unlikely(intr_status & mmc_rx_csum_offload_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD)); + if (unlikely(intr_status & pmt_irq)) { + DBG(KERN_DEBUG "GMAC: received Magic frame\n"); + /* clear the PMT bits 5 and 6 by reading the PMT + * status register. */ + readl(ioaddr + GMAC_PMT); + } + + return; +} + +static void gmac_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + GMAC_CONTROL); + value |= GMAC_CORE_INIT; + writel(value, ioaddr + GMAC_CONTROL); + + /* STBus Bridge Configuration */ + /*writel(0xc5608, ioaddr + 0x00007000);*/ + + /* Freeze MMC counters */ + writel(0x8, ioaddr + GMAC_MMC_CTRL); + /* Mask GMAC interrupts */ + writel(0x207, ioaddr + GMAC_INT_MASK); + +#ifdef STMMAC_VLAN_TAG_USED + /* Tag detection without filtering */ + writel(0x0, ioaddr + GMAC_VLAN_TAG); +#endif + return; +} + +static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int value = 0; + + DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n", + __func__, dev->mc_count, dev->uc_count); + + if (dev->flags & IFF_PROMISC) + value = GMAC_FRAME_FILTER_PR; + else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value = GMAC_FRAME_FILTER_PM; /* pass all multi */ + writel(0xffffffff, ioaddr + GMAC_HASH_HIGH); + writel(0xffffffff, ioaddr + GMAC_HASH_LOW); + } else if (dev->mc_count > 0) { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Hash filter for multicast */ + value = GMAC_FRAME_FILTER_HMC; + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + index the contens of the hash table */ + int bit_nr = + bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + GMAC_HASH_LOW); + writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH); + } + + /* Handle multiple unicast addresses (perfect filtering)*/ + if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES) + /* Switch to promiscuous mode is more than 16 addrs + are required */ + value |= GMAC_FRAME_FILTER_PR; + else { + int i; + struct dev_addr_list *uc_ptr = dev->uc_list; + + for (i = 0; i < dev->uc_count; i++) { + gmac_set_umac_addr(ioaddr, uc_ptr->da_addr, + i + 1); + + DBG(KERN_INFO "\t%d " + "- Unicast addr %02x:%02x:%02x:%02x:%02x:" + "%02x\n", i + 1, + uc_ptr->da_addr[0], uc_ptr->da_addr[1], + uc_ptr->da_addr[2], uc_ptr->da_addr[3], + uc_ptr->da_addr[4], uc_ptr->da_addr[5]); + uc_ptr = uc_ptr->next; + } + } + +#ifdef FRAME_FILTER_DEBUG + /* Enable Receive all mode (to debug filtering_fail errors) */ + value |= GMAC_FRAME_FILTER_RA; +#endif + writel(value, ioaddr + GMAC_FRAME_FILTER); + + DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: " + "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER), + readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW)); + + return; +} + +static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = 0; + + DBG(KERN_DEBUG "GMAC Flow-Control:\n"); + if (fc & FLOW_RX) { + DBG(KERN_DEBUG "\tReceive Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_RFE; + } + if (fc & FLOW_TX) { + DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_TFE; + } + + if (duplex) { + DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time); + flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT); + } + + writel(flow, ioaddr + GMAC_FLOW_CTRL); + return; +} + +static void gmac_pmt(unsigned long ioaddr, unsigned long mode) +{ + unsigned int pmt = 0; + + if (mode == WAKE_MAGIC) { + DBG(KERN_DEBUG "GMAC: WOL Magic frame\n"); + pmt |= power_down | magic_pkt_en; + } else if (mode == WAKE_UCAST) { + DBG(KERN_DEBUG "GMAC: WOL on global unicast\n"); + pmt |= global_unicast; + } + + writel(pmt, ioaddr + GMAC_PMT); + return; +} + +static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.erx.own = 1; + p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1; + /* To support jumbo frames */ + p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1; + if (i == ring_size - 1) + p->des01.erx.end_ring = 1; + if (disable_rx_ic) + p->des01.erx.disable_ic = 1; + p++; + } + return; +} + +static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + + for (i = 0; i < ring_size; i++) { + p->des01.etx.own = 0; + if (i == ring_size - 1) + p->des01.etx.end_ring = 1; + p++; + } + + return; +} + +static int gmac_get_tx_owner(struct dma_desc *p) +{ + return p->des01.etx.own; +} + +static int gmac_get_rx_owner(struct dma_desc *p) +{ + return p->des01.erx.own; +} + +static void gmac_set_tx_owner(struct dma_desc *p) +{ + p->des01.etx.own = 1; +} + +static void gmac_set_rx_owner(struct dma_desc *p) +{ + p->des01.erx.own = 1; +} + +static int gmac_get_tx_ls(struct dma_desc *p) +{ + return p->des01.etx.last_segment; +} + +static void gmac_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.etx.end_ring; + + memset(p, 0, sizeof(struct dma_desc)); + p->des01.etx.end_ring = ter; + + return; +} + +static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.etx.first_segment = is_fs; + if (unlikely(len > BUF_SIZE_4KiB)) { + p->des01.etx.buffer1_size = BUF_SIZE_4KiB; + p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB; + } else { + p->des01.etx.buffer1_size = len; + } + if (likely(csum_flag)) + p->des01.etx.checksum_insertion = cic_full; +} + +static void gmac_clear_tx_ic(struct dma_desc *p) +{ + p->des01.etx.interrupt = 0; +} + +static void gmac_close_tx_desc(struct dma_desc *p) +{ + p->des01.etx.last_segment = 1; + p->des01.etx.interrupt = 1; +} + +static int gmac_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.erx.frame_length; +} + +struct stmmac_ops gmac_driver = { + .core_init = gmac_core_init, + .dump_mac_regs = gmac_dump_regs, + .dma_init = gmac_dma_init, + .dump_dma_regs = gmac_dump_dma_regs, + .dma_mode = gmac_dma_operation_mode, + .dma_diagnostic_fr = gmac_dma_diagnostic_fr, + .tx_status = gmac_get_tx_frame_status, + .rx_status = gmac_get_rx_frame_status, + .get_tx_len = gmac_get_tx_len, + .set_filter = gmac_set_filter, + .flow_ctrl = gmac_flow_ctrl, + .pmt = gmac_pmt, + .init_rx_desc = gmac_init_rx_desc, + .init_tx_desc = gmac_init_tx_desc, + .get_tx_owner = gmac_get_tx_owner, + .get_rx_owner = gmac_get_rx_owner, + .release_tx_desc = gmac_release_tx_desc, + .prepare_tx_desc = gmac_prepare_tx_desc, + .clear_tx_ic = gmac_clear_tx_ic, + .close_tx_desc = gmac_close_tx_desc, + .get_tx_ls = gmac_get_tx_ls, + .set_tx_owner = gmac_set_tx_owner, + .set_rx_owner = gmac_set_rx_owner, + .get_rx_frame_len = gmac_get_rx_frame_len, + .host_irq_status = gmac_irq_status, + .set_umac_addr = gmac_set_umac_addr, + .get_umac_addr = gmac_get_umac_addr, +}; + +struct mac_device_info *gmac_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + u32 uid = readl(ioaddr + GMAC_VERSION); + + pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n", + ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff)); + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + mac->ops = &gmac_driver; + mac->hw.pmt = PMT_SUPPORTED; + mac->hw.link.port = GMAC_CONTROL_PS; + mac->hw.link.duplex = GMAC_CONTROL_DM; + mac->hw.link.speed = GMAC_CONTROL_FES; + mac->hw.mii.addr = GMAC_MII_ADDR; + mac->hw.mii.data = GMAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h new file mode 100644 index 00000000000..684a363120a --- /dev/null +++ b/drivers/net/stmmac/gmac.h @@ -0,0 +1,204 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#define GMAC_CONTROL 0x00000000 /* Configuration */ +#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */ +#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ +#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ +#define GMAC_MII_ADDR 0x00000010 /* MII Address */ +#define GMAC_MII_DATA 0x00000014 /* MII Data */ +#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */ +#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */ +#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */ +#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */ + +#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ +enum gmac_irq_status { + time_stamp_irq = 0x0200, + mmc_rx_csum_offload_irq = 0x0080, + mmc_tx_irq = 0x0040, + mmc_rx_irq = 0x0020, + mmc_irq = 0x0010, + pmt_irq = 0x0008, + pcs_ane_irq = 0x0004, + pcs_link_irq = 0x0002, + rgmii_irq = 0x0001, +}; +#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */ + +/* PMT Control and Status */ +#define GMAC_PMT 0x0000002c +enum power_event { + pointer_reset = 0x80000000, + global_unicast = 0x00000200, + wake_up_rx_frame = 0x00000040, + magic_frame = 0x00000020, + wake_up_frame_en = 0x00000004, + magic_pkt_en = 0x00000002, + power_down = 0x00000001, +}; + +/* GMAC HW ADDR regs */ +#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8)) +#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8)) +#define GMAC_MAX_UNICAST_ADDRESSES 16 + +#define GMAC_AN_CTRL 0x000000c0 /* AN control */ +#define GMAC_AN_STATUS 0x000000c4 /* AN status */ +#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */ +#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */ +#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */ +#define GMAC_TBI 0x000000d4 /* TBI extend status */ +#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */ + +/* GMAC Configuration defines */ +#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ +#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ +#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ +#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */ +#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */ +enum inter_frame_gap { + GMAC_CONTROL_IFG_88 = 0x00040000, + GMAC_CONTROL_IFG_80 = 0x00020000, + GMAC_CONTROL_IFG_40 = 0x000e0000, +}; +#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */ +#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ +#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ +#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ +#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ +#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ +#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ +#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ +#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ +#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad Stripping */ +#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ +#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \ + GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE) + +/* GMAC Frame Filter defines */ +#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ +#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ +#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ +#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ +#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ +#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ +#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ +#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ +#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ +#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ +/* GMII ADDR defines */ +#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ +/* GMAC FLOW CTRL defines */ +#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define GMAC_FLOW_CTRL_PT_SHIFT 16 +#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ +#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ +#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ + +/*--- DMA BLOCK defines ---*/ +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +/* Programmable burst length (passed thorugh platform)*/ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 + +enum rx_tx_priority_ratio { + double_ratio = 0x00004000, /*2:1 */ + triple_ratio = 0x00008000, /*3:1 */ + quadruple_ratio = 0x0000c000, /*4:1 */ +}; + +#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ +#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */ +#define DMA_BUS_MODE_RPBL_SHIFT 17 +#define DMA_BUS_MODE_USP 0x00800000 +#define DMA_BUS_MODE_4PBL 0x01000000 +#define DMA_BUS_MODE_AAL 0x02000000 + +/* DMA CRS Control and Status Register Mapping */ +#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */ +#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */ +/* DMA Bus Mode register defines */ +#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */ +#define DMA_BUS_PR_RATIO_SHIFT 14 +#define DMA_BUS_FB 0x00010000 /* Fixed Burst */ + +/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ +#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ +#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ +/* Theshold for Activating the FC */ +enum rfa { + act_full_minus_1 = 0x00800000, + act_full_minus_2 = 0x00800200, + act_full_minus_3 = 0x00800400, + act_full_minus_4 = 0x00800600, +}; +/* Theshold for Deactivating the FC */ +enum rfd { + deac_full_minus_1 = 0x00400000, + deac_full_minus_2 = 0x00400800, + deac_full_minus_3 = 0x00401000, + deac_full_minus_4 = 0x00401800, +}; +#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ +#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */ + +enum ttc_control { + DMA_CONTROL_TTC_64 = 0x00000000, + DMA_CONTROL_TTC_128 = 0x00004000, + DMA_CONTROL_TTC_192 = 0x00008000, + DMA_CONTROL_TTC_256 = 0x0000c000, + DMA_CONTROL_TTC_40 = 0x00010000, + DMA_CONTROL_TTC_32 = 0x00014000, + DMA_CONTROL_TTC_24 = 0x00018000, + DMA_CONTROL_TTC_16 = 0x0001c000, +}; +#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff + +#define DMA_CONTROL_EFC 0x00000100 +#define DMA_CONTROL_FEF 0x00000080 +#define DMA_CONTROL_FUF 0x00000040 + +enum rtc_control { + DMA_CONTROL_RTC_64 = 0x00000000, + DMA_CONTROL_RTC_32 = 0x00000008, + DMA_CONTROL_RTC_96 = 0x00000010, + DMA_CONTROL_RTC_128 = 0x00000018, +}; +#define DMA_CONTROL_TC_RX_MASK 0xffffffe7 + +#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */ + +/* MMC registers offset */ +#define GMAC_MMC_CTRL 0x100 +#define GMAC_MMC_RX_INTR 0x104 +#define GMAC_MMC_TX_INTR 0x108 +#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c new file mode 100644 index 00000000000..625171b6062 --- /dev/null +++ b/drivers/net/stmmac/mac100.c @@ -0,0 +1,517 @@ +/******************************************************************************* + This is the driver for the MAC 10/100 on-chip Ethernet controller + currently tested on all the ST boards based on STb7109 and stx7200 SoCs. + + DWC Ether MAC 10/100 Universal version 4.0 has been used for developing + this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "common.h" +#include "mac100.h" + +#undef MAC100_DEBUG +/*#define MAC100_DEBUG*/ +#ifdef MAC100_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void mac100_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CONTROL); + + writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL); + +#ifdef STMMAC_VLAN_TAG_USED + writel(ETH_P_8021Q, ioaddr + MAC_VLAN1); +#endif + return; +} + +static void mac100_dump_mac_regs(unsigned long ioaddr) +{ + pr_info("\t----------------------------------------------\n" + "\t MAC100 CSR (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL, + readl(ioaddr + MAC_CONTROL)); + pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH, + readl(ioaddr + MAC_ADDR_HIGH)); + pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW, + readl(ioaddr + MAC_ADDR_LOW)); + pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n", + MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH)); + pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n", + MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW)); + pr_info("\tflow control (offset 0x%x): 0x%08x\n", + MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL)); + pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1, + readl(ioaddr + MAC_VLAN1)); + pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2, + readl(ioaddr + MAC_VLAN2)); + pr_info("\n\tMAC management counter registers\n"); + pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n", + MMC_CONTROL, readl(ioaddr + MMC_CONTROL)); + pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR)); + pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR)); + pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK)); + pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK)); + return; +} + +static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, + u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + /* Enable Application Access by writing to DMA CSR0 */ + writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), + ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Store and Forward capability is not used at all.. + * The transmit threshold can be programmed by + * setting the TTC bits in the DMA control register.*/ +static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else + csr6 |= DMA_CONTROL_TTC_128; + + writel(csr6, ioaddr + DMA_CONTROL); + + return; +} + +static void mac100_dump_dma_regs(unsigned long ioaddr) +{ + int i; + + DBG(KERN_DEBUG "MAC100 DMA CSR \n"); + for (i = 0; i < 9; i++) + pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + i * 4), + readl(ioaddr + DMA_BUS_MODE + i * 4)); + DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", + DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); + DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", + DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); + return; +} + +/* DMA controller has two counters to track the number of + the receive missed frames. */ +static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + struct net_device_stats *stats = (struct net_device_stats *)data; + u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); + + if (unlikely(csr8)) { + if (csr8 & DMA_MISSED_FRAME_OVE) { + stats->rx_over_errors += 0x800; + x->rx_overflow_cntr += 0x800; + } else { + unsigned int ove_cntr; + ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); + stats->rx_over_errors += ove_cntr; + x->rx_overflow_cntr += ove_cntr; + } + + if (csr8 & DMA_MISSED_FRAME_OVE_M) { + stats->rx_missed_errors += 0xffff; + x->rx_missed_cntr += 0xffff; + } else { + unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); + stats->rx_missed_errors += miss_f; + x->rx_missed_cntr += miss_f; + } + } + return; +} + +static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.tx.error_summary)) { + if (unlikely(p->des01.tx.underflow_error)) { + x->tx_underflow++; + stats->tx_fifo_errors++; + } + if (unlikely(p->des01.tx.no_carrier)) { + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.tx.loss_carrier)) { + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely((p->des01.tx.excessive_deferral) || + (p->des01.tx.excessive_collisions) || + (p->des01.tx.late_collision))) + stats->collisions += p->des01.tx.collision_count; + ret = -1; + } + if (unlikely(p->des01.tx.heartbeat_fail)) { + x->tx_heartbeat++; + stats->tx_heartbeat_errors++; + ret = -1; + } + if (unlikely(p->des01.tx.deferred)) + x->tx_deferred++; + + return ret; +} + +static int mac100_get_tx_len(struct dma_desc *p) +{ + return p->des01.tx.buffer1_size; +} + +/* This function verifies if each incoming frame has some errors + * and, if required, updates the multicast statistics. + * In case of success, it returns csum_none becasue the device + * is not able to compute the csum in HW. */ +static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = csum_none; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.rx.last_descriptor == 0)) { + pr_warning("mac100 Error: Oversized Ethernet " + "frame spanned multiple buffers\n"); + stats->rx_length_errors++; + return discard_frame; + } + + if (unlikely(p->des01.rx.error_summary)) { + if (unlikely(p->des01.rx.descriptor_error)) + x->rx_desc++; + if (unlikely(p->des01.rx.partial_frame_error)) + x->rx_partial++; + if (unlikely(p->des01.rx.run_frame)) + x->rx_runt++; + if (unlikely(p->des01.rx.frame_too_long)) + x->rx_toolong++; + if (unlikely(p->des01.rx.collision)) { + x->rx_collision++; + stats->collisions++; + } + if (unlikely(p->des01.rx.crc_error)) { + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + if (unlikely(p->des01.rx.dribbling)) + ret = discard_frame; + + if (unlikely(p->des01.rx.length_error)) { + x->rx_lenght++; + ret = discard_frame; + } + if (unlikely(p->des01.rx.mii_error)) { + x->rx_mii++; + ret = discard_frame; + } + if (p->des01.rx.multicast_frame) { + x->rx_multicast++; + stats->multicast++; + } + return ret; +} + +static void mac100_irq_status(unsigned long ioaddr) +{ + return; +} + +static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + u32 value = readl(ioaddr + MAC_CONTROL); + + if (dev->flags & IFF_PROMISC) { + value |= MAC_CONTROL_PR; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO | + MAC_CONTROL_HP); + } else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value |= MAC_CONTROL_PM; + value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO); + writel(0xffffffff, ioaddr + MAC_HASH_HIGH); + writel(0xffffffff, ioaddr + MAC_HASH_LOW); + } else if (dev->mc_count == 0) { /* no multicast */ + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF | + MAC_CONTROL_HO | MAC_CONTROL_HP); + } else { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Perfect filter mode for physical address and Hash + filter for multicast */ + value |= MAC_CONTROL_HP; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF + | MAC_CONTROL_HO); + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + * index the contens of the hash table */ + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + MAC_HASH_LOW); + writel(mc_filter[1], ioaddr + MAC_HASH_HIGH); + } + + writel(value, ioaddr + MAC_CONTROL); + + DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: " + "HI 0x%08x, LO 0x%08x\n", + __func__, readl(ioaddr + MAC_CONTROL), + readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW)); + return; +} + +static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = MAC_FLOW_CTRL_ENABLE; + + if (duplex) + flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT); + writel(flow, ioaddr + MAC_FLOW_CTRL); + + return; +} + +/* No PMT module supported in our SoC for the Ethernet Controller. */ +static void mac100_pmt(unsigned long ioaddr, unsigned long mode) +{ + return; +} + +static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.rx.own = 1; + p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1; + if (i == ring_size - 1) + p->des01.rx.end_ring = 1; + if (disable_rx_ic) + p->des01.rx.disable_ic = 1; + p++; + } + return; +} + +static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.tx.own = 0; + if (i == ring_size - 1) + p->des01.tx.end_ring = 1; + p++; + } + return; +} + +static int mac100_get_tx_owner(struct dma_desc *p) +{ + return p->des01.tx.own; +} + +static int mac100_get_rx_owner(struct dma_desc *p) +{ + return p->des01.rx.own; +} + +static void mac100_set_tx_owner(struct dma_desc *p) +{ + p->des01.tx.own = 1; +} + +static void mac100_set_rx_owner(struct dma_desc *p) +{ + p->des01.rx.own = 1; +} + +static int mac100_get_tx_ls(struct dma_desc *p) +{ + return p->des01.tx.last_segment; +} + +static void mac100_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.tx.end_ring; + + /* clean field used within the xmit */ + p->des01.tx.first_segment = 0; + p->des01.tx.last_segment = 0; + p->des01.tx.buffer1_size = 0; + + /* clean status reported */ + p->des01.tx.error_summary = 0; + p->des01.tx.underflow_error = 0; + p->des01.tx.no_carrier = 0; + p->des01.tx.loss_carrier = 0; + p->des01.tx.excessive_deferral = 0; + p->des01.tx.excessive_collisions = 0; + p->des01.tx.late_collision = 0; + p->des01.tx.heartbeat_fail = 0; + p->des01.tx.deferred = 0; + + /* set termination field */ + p->des01.tx.end_ring = ter; + + return; +} + +static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.tx.first_segment = is_fs; + p->des01.tx.buffer1_size = len; +} + +static void mac100_clear_tx_ic(struct dma_desc *p) +{ + p->des01.tx.interrupt = 0; +} + +static void mac100_close_tx_desc(struct dma_desc *p) +{ + p->des01.tx.last_segment = 1; + p->des01.tx.interrupt = 1; +} + +static int mac100_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.rx.frame_length; +} + +struct stmmac_ops mac100_driver = { + .core_init = mac100_core_init, + .dump_mac_regs = mac100_dump_mac_regs, + .dma_init = mac100_dma_init, + .dump_dma_regs = mac100_dump_dma_regs, + .dma_mode = mac100_dma_operation_mode, + .dma_diagnostic_fr = mac100_dma_diagnostic_fr, + .tx_status = mac100_get_tx_frame_status, + .rx_status = mac100_get_rx_frame_status, + .get_tx_len = mac100_get_tx_len, + .set_filter = mac100_set_filter, + .flow_ctrl = mac100_flow_ctrl, + .pmt = mac100_pmt, + .init_rx_desc = mac100_init_rx_desc, + .init_tx_desc = mac100_init_tx_desc, + .get_tx_owner = mac100_get_tx_owner, + .get_rx_owner = mac100_get_rx_owner, + .release_tx_desc = mac100_release_tx_desc, + .prepare_tx_desc = mac100_prepare_tx_desc, + .clear_tx_ic = mac100_clear_tx_ic, + .close_tx_desc = mac100_close_tx_desc, + .get_tx_ls = mac100_get_tx_ls, + .set_tx_owner = mac100_set_tx_owner, + .set_rx_owner = mac100_set_rx_owner, + .get_rx_frame_len = mac100_get_rx_frame_len, + .host_irq_status = mac100_irq_status, + .set_umac_addr = mac100_set_umac_addr, + .get_umac_addr = mac100_get_umac_addr, +}; + +struct mac_device_info *mac100_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + pr_info("\tMAC 10/100\n"); + + mac->ops = &mac100_driver; + mac->hw.pmt = PMT_NOT_SUPPORTED; + mac->hw.link.port = MAC_CONTROL_PS; + mac->hw.link.duplex = MAC_CONTROL_F; + mac->hw.link.speed = 0; + mac->hw.mii.addr = MAC_MII_ADDR; + mac->hw.mii.data = MAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h new file mode 100644 index 00000000000..0f8f110d004 --- /dev/null +++ b/drivers/net/stmmac/mac100.h @@ -0,0 +1,116 @@ +/******************************************************************************* + MAC 10/100 Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +/*---------------------------------------------------------------------------- + * MAC BLOCK defines + *---------------------------------------------------------------------------*/ +/* MAC CSR offset */ +#define MAC_CONTROL 0x00000000 /* MAC Control */ +#define MAC_ADDR_HIGH 0x00000004 /* MAC Address High */ +#define MAC_ADDR_LOW 0x00000008 /* MAC Address Low */ +#define MAC_HASH_HIGH 0x0000000c /* Multicast Hash Table High */ +#define MAC_HASH_LOW 0x00000010 /* Multicast Hash Table Low */ +#define MAC_MII_ADDR 0x00000014 /* MII Address */ +#define MAC_MII_DATA 0x00000018 /* MII Data */ +#define MAC_FLOW_CTRL 0x0000001c /* Flow Control */ +#define MAC_VLAN1 0x00000020 /* VLAN1 Tag */ +#define MAC_VLAN2 0x00000024 /* VLAN2 Tag */ + +/* MAC CTRL defines */ +#define MAC_CONTROL_RA 0x80000000 /* Receive All Mode */ +#define MAC_CONTROL_BLE 0x40000000 /* Endian Mode */ +#define MAC_CONTROL_HBD 0x10000000 /* Heartbeat Disable */ +#define MAC_CONTROL_PS 0x08000000 /* Port Select */ +#define MAC_CONTROL_DRO 0x00800000 /* Disable Receive Own */ +#define MAC_CONTROL_EXT_LOOPBACK 0x00400000 /* Reserved (ext loopback?) */ +#define MAC_CONTROL_OM 0x00200000 /* Loopback Operating Mode */ +#define MAC_CONTROL_F 0x00100000 /* Full Duplex Mode */ +#define MAC_CONTROL_PM 0x00080000 /* Pass All Multicast */ +#define MAC_CONTROL_PR 0x00040000 /* Promiscuous Mode */ +#define MAC_CONTROL_IF 0x00020000 /* Inverse Filtering */ +#define MAC_CONTROL_PB 0x00010000 /* Pass Bad Frames */ +#define MAC_CONTROL_HO 0x00008000 /* Hash Only Filtering Mode */ +#define MAC_CONTROL_HP 0x00002000 /* Hash/Perfect Filtering Mode */ +#define MAC_CONTROL_LCC 0x00001000 /* Late Collision Control */ +#define MAC_CONTROL_DBF 0x00000800 /* Disable Broadcast Frames */ +#define MAC_CONTROL_DRTY 0x00000400 /* Disable Retry */ +#define MAC_CONTROL_ASTP 0x00000100 /* Automatic Pad Stripping */ +#define MAC_CONTROL_BOLMT_10 0x00000000 /* Back Off Limit 10 */ +#define MAC_CONTROL_BOLMT_8 0x00000040 /* Back Off Limit 8 */ +#define MAC_CONTROL_BOLMT_4 0x00000080 /* Back Off Limit 4 */ +#define MAC_CONTROL_BOLMT_1 0x000000c0 /* Back Off Limit 1 */ +#define MAC_CONTROL_DC 0x00000020 /* Deferral Check */ +#define MAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define MAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP) + +/* MAC FLOW CTRL defines */ +#define MAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define MAC_FLOW_CTRL_PT_SHIFT 16 +#define MAC_FLOW_CTRL_PASS 0x00000004 /* Pass Control Frames */ +#define MAC_FLOW_CTRL_ENABLE 0x00000002 /* Flow Control Enable */ +#define MAC_FLOW_CTRL_PAUSE 0x00000001 /* Flow Control Busy ... */ + +/* MII ADDR defines */ +#define MAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define MAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ + +/*---------------------------------------------------------------------------- + * DMA BLOCK defines + *---------------------------------------------------------------------------*/ + +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_DBO 0x00100000 /* Descriptor Byte Ordering */ +#define DMA_BUS_MODE_BLE 0x00000080 /* Big Endian/Little Endian */ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +#define DMA_BUS_MODE_BAR_BUS 0x00000002 /* Bar-Bus Arbitration */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DEFAULT 0x00000000 + +/* DMA Control register defines */ +#define DMA_CONTROL_SF 0x00200000 /* Store And Forward */ + +/* Transmit Threshold Control */ +enum ttc_control { + DMA_CONTROL_TTC_DEFAULT = 0x00000000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_64 = 0x00004000, /* Threshold is 64 DWORDS */ + DMA_CONTROL_TTC_128 = 0x00008000, /* Threshold is 128 DWORDS */ + DMA_CONTROL_TTC_256 = 0x0000c000, /* Threshold is 256 DWORDS */ + DMA_CONTROL_TTC_18 = 0x00400000, /* Threshold is 18 DWORDS */ + DMA_CONTROL_TTC_24 = 0x00404000, /* Threshold is 24 DWORDS */ + DMA_CONTROL_TTC_32 = 0x00408000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_40 = 0x0040c000, /* Threshold is 40 DWORDS */ + DMA_CONTROL_SE = 0x00000008, /* Stop On Empty */ + DMA_CONTROL_OSF = 0x00000004, /* Operate On 2nd Frame */ +}; + +/* STMAC110 DMA Missed Frame Counter register defines */ +#define DMA_MISSED_FRAME_OVE 0x10000000 /* FIFO Overflow Overflow */ +#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000 /* Overflow Frame Counter */ +#define DMA_MISSED_FRAME_OVE_M 0x00010000 /* Missed Frame Overflow */ +#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h new file mode 100644 index 00000000000..6d2eae3040e --- /dev/null +++ b/drivers/net/stmmac/stmmac.h @@ -0,0 +1,98 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#define DRV_MODULE_VERSION "Oct_09" + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define STMMAC_VLAN_TAG_USED +#include <linux/if_vlan.h> +#endif + +#include "common.h" +#ifdef CONFIG_STMMAC_TIMER +#include "stmmac_timer.h" +#endif + +struct stmmac_priv { + /* Frequently used values are kept adjacent for cache effect */ + struct dma_desc *dma_tx ____cacheline_aligned; + dma_addr_t dma_tx_phy; + struct sk_buff **tx_skbuff; + unsigned int cur_tx; + unsigned int dirty_tx; + unsigned int dma_tx_size; + int tx_coe; + int tx_coalesce; + + struct dma_desc *dma_rx ; + unsigned int cur_rx; + unsigned int dirty_rx; + struct sk_buff **rx_skbuff; + dma_addr_t *rx_skbuff_dma; + struct sk_buff_head rx_recycle; + + struct net_device *dev; + int is_gmac; + dma_addr_t dma_rx_phy; + unsigned int dma_rx_size; + int rx_csum; + unsigned int dma_buf_sz; + struct device *device; + struct mac_device_info *mac_type; + + struct stmmac_extra_stats xstats; + struct napi_struct napi; + + phy_interface_t phy_interface; + int pbl; + int bus_id; + int phy_addr; + int phy_mask; + int (*phy_reset) (void *priv); + void (*fix_mac_speed) (void *priv, unsigned int speed); + void *bsp_priv; + + int phy_irq; + struct phy_device *phydev; + int oldlink; + int speed; + int oldduplex; + unsigned int flow_ctrl; + unsigned int pause; + struct mii_bus *mii; + + u32 msg_enable; + spinlock_t lock; + int wolopts; + int wolenabled; + int shutdown; +#ifdef CONFIG_STMMAC_TIMER + struct stmmac_timer *tm; +#endif +#ifdef STMMAC_VLAN_TAG_USED + struct vlan_group *vlgrp; +#endif +}; + +extern int stmmac_mdio_unregister(struct net_device *ndev); +extern int stmmac_mdio_register(struct net_device *ndev); +extern void stmmac_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c new file mode 100644 index 00000000000..694ebe6a075 --- /dev/null +++ b/drivers/net/stmmac/stmmac_ethtool.c @@ -0,0 +1,395 @@ +/******************************************************************************* + STMMAC Ethtool support + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define REG_SPACE_SIZE 0x1054 +#define MAC100_ETHTOOL_NAME "st_mac100" +#define GMAC_ETHTOOL_NAME "st_gmac" + +struct stmmac_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define STMMAC_STAT(m) \ + { #m, FIELD_SIZEOF(struct stmmac_extra_stats, m), \ + offsetof(struct stmmac_priv, xstats.m)} + +static const struct stmmac_stats stmmac_gstrings_stats[] = { + STMMAC_STAT(tx_underflow), + STMMAC_STAT(tx_carrier), + STMMAC_STAT(tx_losscarrier), + STMMAC_STAT(tx_heartbeat), + STMMAC_STAT(tx_deferred), + STMMAC_STAT(tx_vlan), + STMMAC_STAT(rx_vlan), + STMMAC_STAT(tx_jabber), + STMMAC_STAT(tx_frame_flushed), + STMMAC_STAT(tx_payload_error), + STMMAC_STAT(tx_ip_header_error), + STMMAC_STAT(rx_desc), + STMMAC_STAT(rx_partial), + STMMAC_STAT(rx_runt), + STMMAC_STAT(rx_toolong), + STMMAC_STAT(rx_collision), + STMMAC_STAT(rx_crc), + STMMAC_STAT(rx_lenght), + STMMAC_STAT(rx_mii), + STMMAC_STAT(rx_multicast), + STMMAC_STAT(rx_gmac_overflow), + STMMAC_STAT(rx_watchdog), + STMMAC_STAT(da_rx_filter_fail), + STMMAC_STAT(sa_rx_filter_fail), + STMMAC_STAT(rx_missed_cntr), + STMMAC_STAT(rx_overflow_cntr), + STMMAC_STAT(tx_undeflow_irq), + STMMAC_STAT(tx_process_stopped_irq), + STMMAC_STAT(tx_jabber_irq), + STMMAC_STAT(rx_overflow_irq), + STMMAC_STAT(rx_buf_unav_irq), + STMMAC_STAT(rx_process_stopped_irq), + STMMAC_STAT(rx_watchdog_irq), + STMMAC_STAT(tx_early_irq), + STMMAC_STAT(fatal_bus_error_irq), + STMMAC_STAT(threshold), + STMMAC_STAT(tx_pkt_n), + STMMAC_STAT(rx_pkt_n), + STMMAC_STAT(poll_n), + STMMAC_STAT(sched_timer_n), + STMMAC_STAT(normal_irq_n), +}; +#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats) + +void stmmac_ethtool_getdrvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + if (!priv->is_gmac) + strcpy(info->driver, MAC100_ETHTOOL_NAME); + else + strcpy(info->driver, GMAC_ETHTOOL_NAME); + + strcpy(info->version, DRV_MODULE_VERSION); + info->fw_version[0] = '\0'; + info->n_stats = STMMAC_STATS_LEN; + return; +} + +int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + if (phy == NULL) { + pr_err("%s: %s: PHY is not registered\n", + __func__, dev->name); + return -ENODEV; + } + if (!netif_running(dev)) { + pr_err("%s: interface is disabled: we cannot track " + "link speed / duplex setting\n", dev->name); + return -EBUSY; + } + cmd->transceiver = XCVR_INTERNAL; + spin_lock_irq(&priv->lock); + rc = phy_ethtool_gset(phy, cmd); + spin_unlock_irq(&priv->lock); + return rc; +} + +int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + + spin_lock(&priv->lock); + rc = phy_ethtool_sset(phy, cmd); + spin_unlock(&priv->lock); + + return rc; +} + +u32 stmmac_ethtool_getmsglevel(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + return priv->msg_enable; +} + +void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct stmmac_priv *priv = netdev_priv(dev); + priv->msg_enable = level; + +} + +int stmmac_check_if_running(struct net_device *dev) +{ + if (!netif_running(dev)) + return -EBUSY; + return 0; +} + +int stmmac_ethtool_get_regs_len(struct net_device *dev) +{ + return REG_SPACE_SIZE; +} + +void stmmac_ethtool_gregs(struct net_device *dev, + struct ethtool_regs *regs, void *space) +{ + int i; + u32 *reg_space = (u32 *) space; + + struct stmmac_priv *priv = netdev_priv(dev); + + memset(reg_space, 0x0, REG_SPACE_SIZE); + + if (!priv->is_gmac) { + /* MAC registers */ + for (i = 0; i < 12; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 9; i++) + reg_space[i + 12] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR); + reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR); + } else { + /* MAC registers */ + for (i = 0; i < 55; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 22; i++) + reg_space[i + 55] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + } + + return; +} + +int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +u32 stmmac_ethtool_get_rx_csum(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + return priv->rx_csum; +} + +static void +stmmac_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + + spin_lock(&priv->lock); + + pause->rx_pause = 0; + pause->tx_pause = 0; + pause->autoneg = priv->phydev->autoneg; + + if (priv->flow_ctrl & FLOW_RX) + pause->rx_pause = 1; + if (priv->flow_ctrl & FLOW_TX) + pause->tx_pause = 1; + + spin_unlock(&priv->lock); + return; +} + +static int +stmmac_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + struct phy_device *phy = priv->phydev; + int new_pause = FLOW_OFF; + int ret = 0; + + spin_lock(&priv->lock); + + if (pause->rx_pause) + new_pause |= FLOW_RX; + if (pause->tx_pause) + new_pause |= FLOW_TX; + + priv->flow_ctrl = new_pause; + + if (phy->autoneg) { + if (netif_running(netdev)) { + struct ethtool_cmd cmd; + /* auto-negotiation automatically restarted */ + cmd.cmd = ETHTOOL_NWAY_RST; + cmd.supported = phy->supported; + cmd.advertising = phy->advertising; + cmd.autoneg = phy->autoneg; + cmd.speed = phy->speed; + cmd.duplex = phy->duplex; + cmd.phy_address = phy->addr; + ret = phy_ethtool_sset(phy, &cmd); + } + } else { + unsigned long ioaddr = netdev->base_addr; + priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex, + priv->flow_ctrl, priv->pause); + } + spin_unlock(&priv->lock); + return ret; +} + +static void stmmac_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *dummy, u64 *data) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int i; + + /* Update HW stats if supported */ + priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats, + ioaddr); + + for (i = 0; i < STMMAC_STATS_LEN; i++) { + char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset; + data[i] = (stmmac_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p); + } + + return; +} + +static int stmmac_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return STMMAC_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + u8 *p = data; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < STMMAC_STATS_LEN; i++) { + memcpy(p, stmmac_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + default: + WARN_ON(1); + break; + } + return; +} + +/* Currently only support WOL through Magic packet. */ +static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock_irq(&priv->lock); + if (priv->wolenabled == PMT_SUPPORTED) { + wol->supported = WAKE_MAGIC; + wol->wolopts = priv->wolopts; + } + spin_unlock_irq(&priv->lock); +} + +static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + u32 support = WAKE_MAGIC; + + if (priv->wolenabled == PMT_NOT_SUPPORTED) + return -EINVAL; + + if (wol->wolopts & ~support) + return -EINVAL; + + if (wol->wolopts == 0) + device_set_wakeup_enable(priv->device, 0); + else + device_set_wakeup_enable(priv->device, 1); + + spin_lock_irq(&priv->lock); + priv->wolopts = wol->wolopts; + spin_unlock_irq(&priv->lock); + + return 0; +} + +static struct ethtool_ops stmmac_ethtool_ops = { + .begin = stmmac_check_if_running, + .get_drvinfo = stmmac_ethtool_getdrvinfo, + .get_settings = stmmac_ethtool_getsettings, + .set_settings = stmmac_ethtool_setsettings, + .get_msglevel = stmmac_ethtool_getmsglevel, + .set_msglevel = stmmac_ethtool_setmsglevel, + .get_regs = stmmac_ethtool_gregs, + .get_regs_len = stmmac_ethtool_get_regs_len, + .get_link = ethtool_op_get_link, + .get_rx_csum = stmmac_ethtool_get_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = stmmac_ethtool_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_pauseparam = stmmac_get_pauseparam, + .set_pauseparam = stmmac_set_pauseparam, + .get_ethtool_stats = stmmac_get_ethtool_stats, + .get_strings = stmmac_get_strings, + .get_wol = stmmac_get_wol, + .set_wol = stmmac_set_wol, + .get_sset_count = stmmac_get_sset_count, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif +}; + +void stmmac_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops); +} diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c new file mode 100644 index 00000000000..c2f14dc9ba2 --- /dev/null +++ b/drivers/net/stmmac/stmmac_main.c @@ -0,0 +1,2204 @@ +/******************************************************************************* + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers. + ST Ethernet IPs are built around a Synopsys IP Core. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + + Documentation available at: + http://www.stlinux.com + Support available at: + https://bugzilla.stlinux.com/ +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/if_ether.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/if_vlan.h> +#include <linux/dma-mapping.h> +#include <linux/stm/soc.h> +#include "stmmac.h" + +#define STMMAC_RESOURCE_NAME "stmmaceth" +#define PHY_RESOURCE_NAME "stmmacphy" + +#undef STMMAC_DEBUG +/*#define STMMAC_DEBUG*/ +#ifdef STMMAC_DEBUG +#define DBG(nlevel, klevel, fmt, args...) \ + ((void)(netif_msg_##nlevel(priv) && \ + printk(KERN_##klevel fmt, ## args))) +#else +#define DBG(nlevel, klevel, fmt, args...) do { } while (0) +#endif + +#undef STMMAC_RX_DEBUG +/*#define STMMAC_RX_DEBUG*/ +#ifdef STMMAC_RX_DEBUG +#define RX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define RX_DBG(fmt, args...) do { } while (0) +#endif + +#undef STMMAC_XMIT_DEBUG +/*#define STMMAC_XMIT_DEBUG*/ +#ifdef STMMAC_TX_DEBUG +#define TX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define TX_DBG(fmt, args...) do { } while (0) +#endif + +#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 /* default 5 seconds */ +static int watchdog = TX_TIMEO; +module_param(watchdog, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); + +static int debug = -1; /* -1: default, 0: no output, 16: all */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); + +static int phyaddr = -1; +module_param(phyaddr, int, S_IRUGO); +MODULE_PARM_DESC(phyaddr, "Physical device address"); + +#define DMA_TX_SIZE 256 +static int dma_txsize = DMA_TX_SIZE; +module_param(dma_txsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list"); + +#define DMA_RX_SIZE 256 +static int dma_rxsize = DMA_RX_SIZE; +module_param(dma_rxsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list"); + +static int flow_ctrl = FLOW_OFF; +module_param(flow_ctrl, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]"); + +static int pause = PAUSE_TIME; +module_param(pause, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pause, "Flow Control Pause Time"); + +#define TC_DEFAULT 64 +static int tc = TC_DEFAULT; +module_param(tc, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tc, "DMA threshold control value"); + +#define RX_NO_COALESCE 1 /* Always interrupt on completion */ +#define TX_NO_COALESCE -1 /* No moderation by default */ + +/* Pay attention to tune this parameter; take care of both + * hardware capability and network stabitily/performance impact. + * Many tests showed that ~4ms latency seems to be good enough. */ +#ifdef CONFIG_STMMAC_TIMER +#define DEFAULT_PERIODIC_RATE 256 +static int tmrate = DEFAULT_PERIODIC_RATE; +module_param(tmrate, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); +#endif + +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +static int buf_sz = DMA_BUFFER_SIZE; +module_param(buf_sz, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(buf_sz, "DMA buffer size"); + +/* In case of Giga ETH, we can enable/disable the COE for the + * transmit HW checksum computation. + * Note that, if tx csum is off in HW, SG will be still supported. */ +static int tx_coe = HW_CSUM; +module_param(tx_coe, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]"); + +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id); +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev); + +/** + * stmmac_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void stmmac_verify_args(void) +{ + if (unlikely(watchdog < 0)) + watchdog = TX_TIMEO; + if (unlikely(dma_rxsize < 0)) + dma_rxsize = DMA_RX_SIZE; + if (unlikely(dma_txsize < 0)) + dma_txsize = DMA_TX_SIZE; + if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB))) + buf_sz = DMA_BUFFER_SIZE; + if (unlikely(flow_ctrl > 1)) + flow_ctrl = FLOW_AUTO; + else if (likely(flow_ctrl < 0)) + flow_ctrl = FLOW_OFF; + if (unlikely((pause < 0) || (pause > 0xffff))) + pause = PAUSE_TIME; + + return; +} + +#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) +static void print_pkt(unsigned char *buf, int len) +{ + int j; + pr_info("len = %d byte, buf addr: 0x%p", len, buf); + for (j = 0; j < len; j++) { + if ((j % 16) == 0) + pr_info("\n %03x:", j); + pr_info(" %02x", buf[j]); + } + pr_info("\n"); + return; +} +#endif + +/* minimum number of free TX descriptors required to wake up TX process */ +#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) +{ + return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; +} + +/** + * stmmac_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void stmmac_adjust_link(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + int new_state = 0; + unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; + + if (phydev == NULL) + return; + + DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n", + phydev->addr, phydev->link); + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 ctrl = readl(ioaddr + MAC_CTRL_REG); + + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) + ctrl &= ~priv->mac_type->hw.link.duplex; + else + ctrl |= priv->mac_type->hw.link.duplex; + priv->oldduplex = phydev->duplex; + } + /* Flow Control operation */ + if (phydev->pause) + priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex, + fc, pause_time); + + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case 1000: + if (likely(priv->is_gmac)) + ctrl &= ~priv->mac_type->hw.link.port; + break; + case 100: + case 10: + if (priv->is_gmac) { + ctrl |= priv->mac_type->hw.link.port; + if (phydev->speed == SPEED_100) { + ctrl |= + priv->mac_type->hw.link. + speed; + } else { + ctrl &= + ~(priv->mac_type->hw. + link.speed); + } + } else { + ctrl &= ~priv->mac_type->hw.link.port; + } + priv->fix_mac_speed(priv->bsp_priv, + phydev->speed); + break; + default: + if (netif_msg_link(priv)) + pr_warning("%s: Speed (%d) is not 10" + " or 100!\n", dev->name, phydev->speed); + break; + } + + priv->speed = phydev->speed; + } + + writel(ctrl, ioaddr + MAC_CTRL_REG); + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + } + + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); + + DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); +} + +/** + * stmmac_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int stmmac_init_phy(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev; + char phy_id[BUS_ID_SIZE]; /* PHY to connect */ + char bus_id[BUS_ID_SIZE]; + + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + + if (priv->phy_addr == -1) { + /* We don't have a PHY, so do nothing */ + return 0; + } + + snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr); + pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); + + phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, + priv->phy_interface); + + if (IS_ERR(phydev)) { + pr_err("%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* + * Broken HW is sometimes missing the pull-up resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + * Note: phydev->phy_id is the result of reading the UID PHY registers. + */ + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" + " Link = %d\n", dev->name, phydev->phy_id, phydev->link); + + priv->phydev = phydev; + + return 0; +} + +static inline void stmmac_mac_enable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_RNABLE_RX; + /* Set the RE (receive enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_enable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_ENABLE_TX; + /* Set the TE (transmit enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_RNABLE_RX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_ENABLE_TX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +/** + * display_ring + * @p: pointer to the ring. + * @size: size of the ring. + * Description: display all the descriptors within the ring. + */ +static void display_ring(struct dma_desc *p, int size) +{ + struct tmp_s { + u64 a; + unsigned int b; + unsigned int c; + }; + int i; + for (i = 0; i < size; i++) { + struct tmp_s *x = (struct tmp_s *)(p + i); + pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", + i, (unsigned int)virt_to_phys(&p[i]), + (unsigned int)(x->a), (unsigned int)((x->a) >> 32), + x->b, x->c); + pr_info("\n"); + } +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. + */ +static void init_dma_desc_rings(struct net_device *dev) +{ + int i; + struct stmmac_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + unsigned int bfsize = priv->dma_buf_sz; + int buff2_needed = 0; + int dis_ic = 0; + +#ifdef CONFIG_STMMAC_TIMER + /* Using Timers disable interrupts on completion for the reception */ + dis_ic = 1; +#endif + /* Set the Buffer size according to the MTU; + * indeed, in case of jumbo we need to bump-up the buffer sizes. + */ + if (unlikely(dev->mtu >= BUF_SIZE_8KiB)) + bfsize = BUF_SIZE_16KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_4KiB)) + bfsize = BUF_SIZE_8KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_2KiB)) + bfsize = BUF_SIZE_4KiB; + else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE)) + bfsize = BUF_SIZE_2KiB; + else + bfsize = DMA_BUFFER_SIZE; + + /* If the MTU exceeds 8k so use the second buffer in the chain */ + if (bfsize >= BUF_SIZE_8KiB) + buff2_needed = 1; + + DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", + txsize, rxsize, bfsize); + + priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); + priv->rx_skbuff = + kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); + priv->dma_rx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + rxsize * + sizeof(struct dma_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, + GFP_KERNEL); + priv->dma_tx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + txsize * + sizeof(struct dma_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + + if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) { + pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__); + return; + } + + DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, " + "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n", + dev->name, priv->dma_rx, priv->dma_tx, + (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy); + + /* RX INITIALIZATION */ + DBG(probe, INFO, "stmmac: SKB addresses:\n" + "skb\t\tskb data\tdma data\n"); + + for (i = 0; i < rxsize; i++) { + struct dma_desc *p = priv->dma_rx + i; + + skb = netdev_alloc_skb_ip_align(dev, bfsize); + if (unlikely(skb == NULL)) { + pr_err("%s: Rx init fails; skb is NULL\n", __func__); + break; + } + priv->rx_skbuff[i] = skb; + priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + bfsize, DMA_FROM_DEVICE); + + p->des2 = priv->rx_skbuff_dma[i]; + if (unlikely(buff2_needed)) + p->des3 = p->des2 + BUF_SIZE_8KiB; + DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], + priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]); + } + priv->cur_rx = 0; + priv->dirty_rx = (unsigned int)(i - rxsize); + priv->dma_buf_sz = bfsize; + buf_sz = bfsize; + + /* TX INITIALIZATION */ + for (i = 0; i < txsize; i++) { + priv->tx_skbuff[i] = NULL; + priv->dma_tx[i].des2 = 0; + } + priv->dirty_tx = 0; + priv->cur_tx = 0; + + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize); + + if (netif_msg_hw(priv)) { + pr_info("RX descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + pr_info("TX descriptor ring:\n"); + display_ring(priv->dma_tx, txsize); + } + return; +} + +static void dma_free_rx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_rx_size; i++) { + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; + } + return; +} + +static void dma_free_tx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_tx_size; i++) { + if (priv->tx_skbuff[i] != NULL) { + struct dma_desc *p = priv->dma_tx + i; + if (p->des2) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + dev_kfree_skb_any(priv->tx_skbuff[i]); + priv->tx_skbuff[i] = NULL; + } + } + return; +} + +static void free_dma_desc_resources(struct stmmac_priv *priv) +{ + /* Release the DMA TX/RX socket buffers */ + dma_free_rx_skbufs(priv); + dma_free_tx_skbufs(priv); + + /* Free the region of consistent memory previously allocated for + * the DMA */ + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + kfree(priv->rx_skbuff_dma); + kfree(priv->rx_skbuff); + kfree(priv->tx_skbuff); + + return; +} + +/** + * stmmac_dma_start_tx + * @ioaddr: device I/O address + * Description: this function starts the DMA tx process. + */ +static void stmmac_dma_start_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +static void stmmac_dma_stop_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +/** + * stmmac_dma_start_rx + * @ioaddr: device I/O address + * Description: this function starts the DMA rx process. + */ +static void stmmac_dma_start_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +static void stmmac_dma_stop_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +/** + * stmmac_dma_operation_mode - HW DMA operation mode + * @priv : pointer to the private device structure. + * Description: it sets the DMA operation mode: tx/rx DMA thresholds + * or Store-And-Forward capability. It also verifies the COE for the + * transmission in case of Giga ETH. + */ +static void stmmac_dma_operation_mode(struct stmmac_priv *priv) +{ + if (!priv->is_gmac) { + /* MAC 10/100 */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0); + priv->tx_coe = NO_HW_CSUM; + } else { + if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) { + priv->mac_type->ops->dma_mode(priv->dev->base_addr, + SF_DMA_MODE, SF_DMA_MODE); + tc = SF_DMA_MODE; + priv->tx_coe = HW_CSUM; + } else { + /* Checksum computation is performed in software. */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, + SF_DMA_MODE); + priv->tx_coe = NO_HW_CSUM; + } + } + tx_coe = priv->tx_coe; + + return; +} + +#ifdef STMMAC_DEBUG +/** + * show_tx_process_state + * @status: tx descriptor status field + * Description: it shows the Transmit Process State for CSR5[22:20] + */ +static void show_tx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; + + switch (state) { + case 0: + pr_info("- TX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- TX (Running):Fetching the Tx desc\n"); + break; + case 2: + pr_info("- TX (Running): Waiting for end of tx\n"); + break; + case 3: + pr_info("- TX (Running): Reading the data " + "and queuing the data into the Tx buf\n"); + break; + case 6: + pr_info("- TX (Suspended): Tx Buff Underflow " + "or an unavailable Transmit descriptor\n"); + break; + case 7: + pr_info("- TX (Running): Closing Tx descriptor\n"); + break; + default: + break; + } + return; +} + +/** + * show_rx_process_state + * @status: rx descriptor status field + * Description: it shows the Receive Process State for CSR5[19:17] + */ +static void show_rx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; + + switch (state) { + case 0: + pr_info("- RX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- RX (Running): Fetching the Rx desc\n"); + break; + case 2: + pr_info("- RX (Running):Checking for end of pkt\n"); + break; + case 3: + pr_info("- RX (Running): Waiting for Rx pkt\n"); + break; + case 4: + pr_info("- RX (Suspended): Unavailable Rx buf\n"); + break; + case 5: + pr_info("- RX (Running): Closing Rx descriptor\n"); + break; + case 6: + pr_info("- RX(Running): Flushing the current frame" + " from the Rx buf\n"); + break; + case 7: + pr_info("- RX (Running): Queuing the Rx frame" + " from the Rx buf into memory\n"); + break; + default: + break; + } + return; +} +#endif + +/** + * stmmac_tx: + * @priv: private driver structure + * Description: it reclaims resources after transmission completes. + */ +static void stmmac_tx(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned long ioaddr = priv->dev->base_addr; + + while (priv->dirty_tx != priv->cur_tx) { + int last; + unsigned int entry = priv->dirty_tx % txsize; + struct sk_buff *skb = priv->tx_skbuff[entry]; + struct dma_desc *p = priv->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->mac_type->ops->get_tx_owner(p)) + break; + + /* Verify tx error by looking at the last segment */ + last = priv->mac_type->ops->get_tx_ls(p); + if (likely(last)) { + int tx_error = + priv->mac_type->ops->tx_status(&priv->dev->stats, + &priv->xstats, + p, ioaddr); + if (likely(tx_error == 0)) { + priv->dev->stats.tx_packets++; + priv->xstats.tx_pkt_n++; + } else + priv->dev->stats.tx_errors++; + } + TX_DBG("%s: curr %d, dirty %d\n", __func__, + priv->cur_tx, priv->dirty_tx); + + if (likely(p->des2)) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + if (unlikely(p->des3)) + p->des3 = 0; + + if (likely(skb != NULL)) { + /* + * If there's room in the queue (limit it to size) + * we add this skb back into the pool, + * if it's the right size. + */ + if ((skb_queue_len(&priv->rx_recycle) < + priv->dma_rx_size) && + skb_recycle_check(skb, priv->dma_buf_sz)) + __skb_queue_head(&priv->rx_recycle, skb); + else + dev_kfree_skb(skb); + + priv->tx_skbuff[entry] = NULL; + } + + priv->mac_type->ops->release_tx_desc(p); + + entry = (++priv->dirty_tx) % txsize; + } + if (unlikely(netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { + TX_DBG("%s: restart transmit\n", __func__); + netif_wake_queue(priv->dev); + } + netif_tx_unlock(priv->dev); + } + return; +} + +static inline void stmmac_enable_irq(struct stmmac_priv *priv) +{ +#ifndef CONFIG_STMMAC_TIMER + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); +#else + priv->tm->timer_start(tmrate); +#endif +} + +static inline void stmmac_disable_irq(struct stmmac_priv *priv) +{ +#ifndef CONFIG_STMMAC_TIMER + writel(0, priv->dev->base_addr + DMA_INTR_ENA); +#else + priv->tm->timer_stop(); +#endif +} + +static int stmmac_has_work(struct stmmac_priv *priv) +{ + unsigned int has_work = 0; + int rxret, tx_work = 0; + + rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx + + (priv->cur_rx % priv->dma_rx_size)); + + if (priv->dirty_tx != priv->cur_tx) + tx_work = 1; + + if (likely(!rxret || tx_work)) + has_work = 1; + + return has_work; +} + +static inline void _stmmac_schedule(struct stmmac_priv *priv) +{ + if (likely(stmmac_has_work(priv))) { + stmmac_disable_irq(priv); + napi_schedule(&priv->napi); + } +} + +#ifdef CONFIG_STMMAC_TIMER +void stmmac_schedule(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + priv->xstats.sched_timer_n++; + + _stmmac_schedule(priv); + + return; +} + +static void stmmac_no_timer_started(unsigned int x) +{; +}; + +static void stmmac_no_timer_stopped(void) +{; +}; +#endif + +/** + * stmmac_tx_err: + * @priv: pointer to the private device structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void stmmac_tx_err(struct stmmac_priv *priv) +{ + netif_stop_queue(priv->dev); + + stmmac_dma_stop_tx(priv->dev->base_addr); + dma_free_tx_skbufs(priv); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + priv->dirty_tx = 0; + priv->cur_tx = 0; + stmmac_dma_start_tx(priv->dev->base_addr); + + priv->dev->stats.tx_errors++; + netif_wake_queue(priv->dev); + + return; +} + +/** + * stmmac_dma_interrupt - Interrupt handler for the driver + * @dev: net device structure + * Description: Interrupt handler for the driver (DMA). + */ +static void stmmac_dma_interrupt(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct stmmac_priv *priv = netdev_priv(dev); + /* read the status register (CSR5) */ + u32 intr_status = readl(ioaddr + DMA_STATUS); + + DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status); + +#ifdef STMMAC_DEBUG + /* It displays the DMA transmit process state (CSR5 register) */ + if (netif_msg_tx_done(priv)) + show_tx_process_state(intr_status); + if (netif_msg_rx_status(priv)) + show_rx_process_state(intr_status); +#endif + /* ABNORMAL interrupts */ + if (unlikely(intr_status & DMA_STATUS_AIS)) { + DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: "); + if (unlikely(intr_status & DMA_STATUS_UNF)) { + DBG(intr, INFO, "transmit underflow\n"); + if (unlikely(tc != SF_DMA_MODE) + && (tc <= 256)) { + /* Try to bump up the threshold */ + tc += 64; + priv->mac_type->ops->dma_mode(ioaddr, tc, + SF_DMA_MODE); + priv->xstats.threshold = tc; + } + stmmac_tx_err(priv); + priv->xstats.tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) { + DBG(intr, INFO, "transmit jabber\n"); + priv->xstats.tx_jabber_irq++; + } + if (unlikely(intr_status & DMA_STATUS_OVF)) { + DBG(intr, INFO, "recv overflow\n"); + priv->xstats.rx_overflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RU)) { + DBG(intr, INFO, "receive buffer unavailable\n"); + priv->xstats.rx_buf_unav_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RPS)) { + DBG(intr, INFO, "receive process stopped\n"); + priv->xstats.rx_process_stopped_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RWT)) { + DBG(intr, INFO, "receive watchdog\n"); + priv->xstats.rx_watchdog_irq++; + } + if (unlikely(intr_status & DMA_STATUS_ETI)) { + DBG(intr, INFO, "transmit early interrupt\n"); + priv->xstats.tx_early_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TPS)) { + DBG(intr, INFO, "transmit process stopped\n"); + priv->xstats.tx_process_stopped_irq++; + stmmac_tx_err(priv); + } + if (unlikely(intr_status & DMA_STATUS_FBI)) { + DBG(intr, INFO, "fatal bus error\n"); + priv->xstats.fatal_bus_error_irq++; + stmmac_tx_err(priv); + } + } + + /* TX/RX NORMAL interrupts */ + if (intr_status & DMA_STATUS_NIS) { + priv->xstats.normal_irq_n++; + if (likely((intr_status & DMA_STATUS_RI) || + (intr_status & (DMA_STATUS_TI)))) + _stmmac_schedule(priv); + } + + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_info("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ + writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); + + DBG(intr, INFO, "\n\n"); + + return; +} + +/** + * stmmac_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_open(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int ret; + + /* Check that the MAC address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using the following linux command: + * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */ + if (!is_valid_ether_addr(dev->dev_addr)) { + random_ether_addr(dev->dev_addr); + pr_warning("%s: generated random MAC address %pM\n", dev->name, + dev->dev_addr); + } + + stmmac_verify_args(); + + ret = stmmac_init_phy(dev); + if (unlikely(ret)) { + pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); + return ret; + } + + /* Request the IRQ lines */ + ret = request_irq(dev->irq, &stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, dev->irq, ret); + return ret; + } + +#ifdef CONFIG_STMMAC_TIMER + priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + if (unlikely(priv->tm == NULL)) { + pr_err("%s: ERROR: timer memory alloc failed \n", __func__); + return -ENOMEM; + } + priv->tm->freq = tmrate; + + /* Test if the HW timer can be actually used. + * In case of failure continue with no timer. */ + if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { + pr_warning("stmmaceth: cannot attach the HW timer\n"); + tmrate = 0; + priv->tm->freq = 0; + priv->tm->timer_start = stmmac_no_timer_started; + priv->tm->timer_stop = stmmac_no_timer_stopped; + } +#endif + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); + priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); + priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + if (unlikely(priv->mac_type->ops->dma_init(ioaddr, + priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) { + + pr_err("%s: DMA initialization failed\n", __func__); + return -1; + } + + /* Copy the MAC addr into the HW */ + priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0); + /* Initialize the MAC Core */ + priv->mac_type->ops->core_init(ioaddr); + + priv->shutdown = 0; + + /* Initialise the MMC (if present) to disable all interrupts. */ + writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK); + writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK); + + /* Enable the MAC Rx/Tx */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + + /* Set the HW DMA mode and the COE */ + stmmac_dma_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); + priv->xstats.threshold = tc; + + /* Start the ball rolling... */ + DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + /* Dump DMA/MAC registers */ + if (netif_msg_hw(priv)) { + priv->mac_type->ops->dump_mac_regs(ioaddr); + priv->mac_type->ops->dump_dma_regs(ioaddr); + } + + if (priv->phydev) + phy_start(priv->phydev); + + napi_enable(&priv->napi); + skb_queue_head_init(&priv->rx_recycle); + netif_start_queue(dev); + return 0; +} + +/** + * stmmac_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int stmmac_release(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_stop_queue(dev); + +#ifdef CONFIG_STMMAC_TIMER + /* Stop and release the timer */ + stmmac_close_ext_timer(); + if (priv->tm != NULL) + kfree(priv->tm); +#endif + napi_disable(&priv->napi); + skb_queue_purge(&priv->rx_recycle); + + /* Free the IRQ lines */ + free_irq(dev->irq, dev); + + /* Stop TX/RX DMA and clear the descriptors */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC core */ + stmmac_mac_disable_tx(dev->base_addr); + stmmac_mac_disable_rx(dev->base_addr); + + netif_carrier_off(dev); + + return 0; +} + +/* + * To perform emulated hardware segmentation on skb. + */ +static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb) +{ + struct sk_buff *segs, *curr_skb; + int gso_segs = skb_shinfo(skb)->gso_segs; + + /* Estimate the number of fragments in the worst case */ + if (unlikely(stmmac_tx_avail(priv) < gso_segs)) { + netif_stop_queue(priv->dev); + TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n", + __func__); + if (stmmac_tx_avail(priv) < gso_segs) + return NETDEV_TX_BUSY; + + netif_wake_queue(priv->dev); + } + TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n", + skb, skb->len); + + segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO); + if (unlikely(IS_ERR(segs))) + goto sw_tso_end; + + do { + curr_skb = segs; + segs = segs->next; + TX_DBG("\t\tcurrent skb->len: %d, *curr %p," + "*next %p\n", curr_skb->len, curr_skb, segs); + curr_skb->next = NULL; + stmmac_xmit(curr_skb, priv->dev); + } while (segs); + +sw_tso_end: + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb, + struct net_device *dev, + int csum_insertion) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int nopaged_len = skb_headlen(skb); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry = priv->cur_tx % txsize; + struct dma_desc *desc = priv->dma_tx + entry; + + if (nopaged_len > BUF_SIZE_8KiB) { + + int buf2_size = nopaged_len - BUF_SIZE_8KiB; + + desc->des2 = dma_map_single(priv->device, skb->data, + BUF_SIZE_8KiB, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB, + csum_insertion); + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + desc->des2 = dma_map_single(priv->device, + skb->data + BUF_SIZE_8KiB, + buf2_size, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 0, + buf2_size, csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + priv->tx_skbuff[entry] = NULL; + } else { + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + return entry; +} + +/** + * stmmac_xmit: + * @skb : the socket buffer + * @dev : device pointer + * Description : Tx entry point of the driver. + */ +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry; + int i, csum_insertion = 0; + int nfrags = skb_shinfo(skb)->nr_frags; + struct dma_desc *desc, *first; + + if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + /* This is a hard error, log it. */ + pr_err("%s: BUG! Tx Ring full when queue awake\n", + __func__); + } + return NETDEV_TX_BUSY; + } + + entry = priv->cur_tx % txsize; + +#ifdef STMMAC_XMIT_DEBUG + if ((skb->len > ETH_FRAME_LEN) || nfrags) + pr_info("stmmac xmit:\n" + "\tskb addr %p - len: %d - nopaged_len: %d\n" + "\tn_frags: %d - ip_summed: %d - %s gso\n", + skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed, + !skb_is_gso(skb) ? "isn't" : "is"); +#endif + + if (unlikely(skb_is_gso(skb))) + return stmmac_sw_tso(priv, skb); + + if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { + if (likely(priv->tx_coe == NO_HW_CSUM)) + skb_checksum_help(skb); + else + csum_insertion = 1; + } + + desc = priv->dma_tx + entry; + first = desc; + +#ifdef STMMAC_XMIT_DEBUG + if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN)) + pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n" + "\t\tn_frags: %d, ip_summed: %d\n", + skb->len, skb_headlen(skb), nfrags, skb->ip_summed); +#endif + priv->tx_skbuff[entry] = skb; + if (unlikely(skb->len >= BUF_SIZE_4KiB)) { + entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion); + desc = priv->dma_tx + entry; + } else { + unsigned int nopaged_len = skb_headlen(skb); + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + int len = frag->size; + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + TX_DBG("\t[entry %d] segment len: %d\n", entry, len); + desc->des2 = dma_map_page(priv->device, frag->page, + frag->page_offset, + len, DMA_TO_DEVICE); + priv->tx_skbuff[entry] = NULL; + priv->mac_type->ops->prepare_tx_desc(desc, 0, len, + csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + } + + /* Interrupt on completition only for the latest segment */ + priv->mac_type->ops->close_tx_desc(desc); +#ifdef CONFIG_STMMAC_TIMER + /* Clean IC while using timers */ + priv->mac_type->ops->clear_tx_ic(desc); +#endif + /* To avoid raise condition */ + priv->mac_type->ops->set_tx_owner(first); + + priv->cur_tx++; + +#ifdef STMMAC_XMIT_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, " + "first=%p, nfrags=%d\n", + (priv->cur_tx % txsize), (priv->dirty_tx % txsize), + entry, first, nfrags); + display_ring(priv->dma_tx, txsize); + pr_info(">>> frame to be transmitted: "); + print_pkt(skb->data, skb->len); + } +#endif + if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) { + TX_DBG("%s: stop transmitted packets\n", __func__); + netif_stop_queue(dev); + } + + dev->stats.tx_bytes += skb->len; + + /* CSR1 enables the transmit DMA to check for new descriptor */ + writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND); + + return NETDEV_TX_OK; +} + +static inline void stmmac_rx_refill(struct stmmac_priv *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + struct dma_desc *p = priv->dma_rx; + + for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) { + unsigned int entry = priv->dirty_rx % rxsize; + if (likely(priv->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = __skb_dequeue(&priv->rx_recycle); + if (skb == NULL) + skb = netdev_alloc_skb_ip_align(priv->dev, + bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rx_skbuff[entry] = skb; + priv->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + (p + entry)->des2 = priv->rx_skbuff_dma[entry]; + if (unlikely(priv->is_gmac)) { + if (bfsize >= BUF_SIZE_8KiB) + (p + entry)->des3 = + (p + entry)->des2 + BUF_SIZE_8KiB; + } + RX_DBG(KERN_INFO "\trefill entry #%d\n", entry); + } + priv->mac_type->ops->set_rx_owner(p + entry); + } + return; +} + +static int stmmac_rx(struct stmmac_priv *priv, int limit) +{ + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->cur_rx % rxsize; + unsigned int next_entry; + unsigned int count = 0; + struct dma_desc *p = priv->dma_rx + entry; + struct dma_desc *p_next; + +#ifdef STMMAC_RX_DEBUG + if (netif_msg_hw(priv)) { + pr_debug(">>> stmmac_rx: descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + } +#endif + count = 0; + while (!priv->mac_type->ops->get_rx_owner(p)) { + int status; + + if (count >= limit) + break; + + count++; + + next_entry = (++priv->cur_rx) % rxsize; + p_next = priv->dma_rx + next_entry; + prefetch(p_next); + + /* read the status of the incoming frame */ + status = (priv->mac_type->ops->rx_status(&priv->dev->stats, + &priv->xstats, p)); + if (unlikely(status == discard_frame)) + priv->dev->stats.rx_errors++; + else { + struct sk_buff *skb; + /* Length should omit the CRC */ + int frame_len = + priv->mac_type->ops->get_rx_frame_len(p) - 4; + +#ifdef STMMAC_RX_DEBUG + if (frame_len > ETH_FRAME_LEN) + pr_debug("\tRX frame size %d, COE status: %d\n", + frame_len, status); + + if (netif_msg_hw(priv)) + pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", + p, entry, p->des2); +#endif + skb = priv->rx_skbuff[entry]; + if (unlikely(!skb)) { + pr_err("%s: Inconsistent Rx descriptor chain\n", + priv->dev->name); + priv->dev->stats.rx_dropped++; + break; + } + prefetch(skb->data - NET_IP_ALIGN); + priv->rx_skbuff[entry] = NULL; + + skb_put(skb, frame_len); + dma_unmap_single(priv->device, + priv->rx_skbuff_dma[entry], + priv->dma_buf_sz, DMA_FROM_DEVICE); +#ifdef STMMAC_RX_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info(" frame received (%dbytes)", frame_len); + print_pkt(skb->data, frame_len); + } +#endif + skb->protocol = eth_type_trans(skb, priv->dev); + + if (unlikely(status == csum_none)) { + /* always for the old mac 10/100 */ + skb->ip_summed = CHECKSUM_NONE; + netif_receive_skb(skb); + } else { + skb->ip_summed = CHECKSUM_UNNECESSARY; + napi_gro_receive(&priv->napi, skb); + } + + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += frame_len; + priv->dev->last_rx = jiffies; + } + entry = next_entry; + p = p_next; /* use prefetched values */ + } + + stmmac_rx_refill(priv); + + priv->xstats.rx_pkt_n += count; + + return count; +} + +/** + * stmmac_poll - stmmac poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * This function implements the the reception process. + * Also it runs the TX completion thread + */ +static int stmmac_poll(struct napi_struct *napi, int budget) +{ + struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi); + int work_done = 0; + + priv->xstats.poll_n++; + stmmac_tx(priv); + work_done = stmmac_rx(priv, budget); + + if (work_done < budget) { + napi_complete(napi); + stmmac_enable_irq(priv); + } + return work_done; +} + +/** + * stmmac_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable tmrate. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void stmmac_tx_timeout(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Clear Tx resources and restart transmitting again */ + stmmac_tx_err(priv); + return; +} + +/* Configuration changes (passed on by ifconfig) */ +static int stmmac_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) { + pr_warning("%s: can't change I/O address\n", dev->name); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != dev->irq) { + pr_warning("%s: can't change IRQ number %d\n", + dev->name, dev->irq); + return -EOPNOTSUPP; + } + + /* ignore other fields */ + return 0; +} + +/** + * stmmac_multicast_list - entry point for multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. + * Return value: + * void. + */ +static void stmmac_multicast_list(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + priv->mac_type->ops->set_filter(dev); + spin_unlock(&priv->lock); + return; +} + +/** + * stmmac_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_change_mtu(struct net_device *dev, int new_mtu) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int max_mtu; + + if (netif_running(dev)) { + pr_err("%s: must be stopped to change its MTU\n", dev->name); + return -EBUSY; + } + + if (priv->is_gmac) + max_mtu = JUMBO_LEN; + else + max_mtu = ETH_DATA_LEN; + + if ((new_mtu < 46) || (new_mtu > max_mtu)) { + pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); + return -EINVAL; + } + + dev->mtu = new_mtu; + + return 0; +} + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct stmmac_priv *priv = netdev_priv(dev); + + if (unlikely(!dev)) { + pr_err("%s: invalid dev pointer\n", __func__); + return IRQ_NONE; + } + + if (priv->is_gmac) { + unsigned long ioaddr = dev->base_addr; + /* To handle GMAC own interrupts */ + priv->mac_type->ops->host_irq_status(ioaddr); + } + stmmac_dma_interrupt(dev); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling receive - used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. */ +static void stmmac_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + stmmac_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/** + * stmmac_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently there are no special functionality supported in IOCTL, just the + * phy_mii_ioctl(...) can be invoked. + */ +static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + + spin_lock(&priv->lock); + ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); + spin_unlock(&priv->lock); + default: + break; + } + return ret; +} + +#ifdef STMMAC_VLAN_TAG_USED +static void stmmac_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp); + + spin_lock(&priv->lock); + priv->vlgrp = grp; + spin_unlock(&priv->lock); + + return; +} +#endif + +static const struct net_device_ops stmmac_netdev_ops = { + .ndo_open = stmmac_open, + .ndo_start_xmit = stmmac_xmit, + .ndo_stop = stmmac_release, + .ndo_change_mtu = stmmac_change_mtu, + .ndo_set_multicast_list = stmmac_multicast_list, + .ndo_tx_timeout = stmmac_tx_timeout, + .ndo_do_ioctl = stmmac_ioctl, + .ndo_set_config = stmmac_config, +#ifdef STMMAC_VLAN_TAG_USED + .ndo_vlan_rx_register = stmmac_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = stmmac_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/** + * stmmac_probe - Initialization of the adapter . + * @dev : device pointer + * Description: The function initializes the network device structure for + * the STMMAC driver. It also calls the low level routines + * in order to init the HW (i.e. the DMA engine) + */ +static int stmmac_probe(struct net_device *dev) +{ + int ret = 0; + struct stmmac_priv *priv = netdev_priv(dev); + + ether_setup(dev); + + dev->netdev_ops = &stmmac_netdev_ops; + stmmac_set_ethtool_ops(dev); + + dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA); + dev->watchdog_timeo = msecs_to_jiffies(watchdog); +#ifdef STMMAC_VLAN_TAG_USED + /* Both mac100 and gmac support receive VLAN tag detection */ + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + if (priv->is_gmac) + priv->rx_csum = 1; + + if (flow_ctrl) + priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ + + priv->pause = pause; + netif_napi_add(dev, &priv->napi, stmmac_poll, 64); + + /* Get the MAC address */ + priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0); + + if (!is_valid_ether_addr(dev->dev_addr)) + pr_warning("\tno valid MAC address;" + "please, use ifconfig or nwhwconfig!\n"); + + ret = register_netdev(dev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", + __func__, ret); + return -ENODEV; + } + + DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n", + dev->name, (dev->features & NETIF_F_SG) ? "on" : "off", + (dev->features & NETIF_F_HW_CSUM) ? "on" : "off"); + + spin_lock_init(&priv->lock); + + return ret; +} + +/** + * stmmac_mac_device_setup + * @dev : device pointer + * Description: select and initialise the mac device (mac100 or Gmac). + */ +static int stmmac_mac_device_setup(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + struct mac_device_info *device; + + if (priv->is_gmac) + device = gmac_setup(ioaddr); + else + device = mac100_setup(ioaddr); + + if (!device) + return -ENOMEM; + + priv->mac_type = device; + + priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->wolopts = WAKE_MAGIC; /* Magic Frame */ + + return 0; +} + +static int stmmacphy_dvr_probe(struct platform_device *pdev) +{ + struct plat_stmmacphy_data *plat_dat; + plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data); + + pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n", + plat_dat->bus_id); + + return 0; +} + +static int stmmacphy_dvr_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver stmmacphy_driver = { + .driver = { + .name = PHY_RESOURCE_NAME, + }, + .probe = stmmacphy_dvr_probe, + .remove = stmmacphy_dvr_remove, +}; + +/** + * stmmac_associate_phy + * @dev: pointer to device structure + * @data: points to the private structure. + * Description: Scans through all the PHYs we have registered and checks if + * any are associated with our MAC. If so, then just fill in + * the blanks in our local context structure + */ +static int stmmac_associate_phy(struct device *dev, void *data) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)data; + struct plat_stmmacphy_data *plat_dat; + + plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data); + + DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__, + plat_dat->bus_id); + + /* Check that this phy is for the MAC being initialised */ + if (priv->bus_id != plat_dat->bus_id) + return 0; + + /* OK, this PHY is connected to the MAC. + Go ahead and get the parameters */ + DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__); + priv->phy_irq = + platform_get_irq_byname(to_platform_device(dev), "phyirq"); + DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__, + plat_dat->bus_id, priv->phy_irq); + + /* Override with kernel parameters if supplied XXX CRS XXX + * this needs to have multiple instances */ + if ((phyaddr >= 0) && (phyaddr <= 31)) + plat_dat->phy_addr = phyaddr; + + priv->phy_addr = plat_dat->phy_addr; + priv->phy_mask = plat_dat->phy_mask; + priv->phy_interface = plat_dat->interface; + priv->phy_reset = plat_dat->phy_reset; + + DBG(probe, DEBUG, "%s: exiting\n", __func__); + return 1; /* forces exit of driver_for_each_device() */ +} + +/** + * stmmac_dvr_probe + * @pdev: platform device pointer + * Description: the driver is initialized through platform_device. + */ +static int stmmac_dvr_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + unsigned int *addr = NULL; + struct net_device *ndev = NULL; + struct stmmac_priv *priv; + struct plat_stmmacenet_data *plat_dat; + + pr_info("STMMAC driver:\n\tplatform registration... "); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + pr_info("done!\n"); + + if (!request_mem_region(res->start, (res->end - res->start), + pdev->name)) { + pr_err("%s: ERROR: memory allocation failed" + "cannot get the I/O addr 0x%x\n", + __func__, (unsigned int)res->start); + ret = -EBUSY; + goto out; + } + + addr = ioremap(res->start, (res->end - res->start)); + if (!addr) { + pr_err("%s: ERROR: memory mapping failed \n", __func__); + ret = -ENOMEM; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct stmmac_priv)); + if (!ndev) { + pr_err("%s: ERROR: allocating the device\n", __func__); + ret = -ENOMEM; + goto out; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + /* Get the MAC information */ + ndev->irq = platform_get_irq_byname(pdev, "macirq"); + if (ndev->irq == -ENXIO) { + pr_err("%s: ERROR: MAC IRQ configuration " + "information not found\n", __func__); + ret = -ENODEV; + goto out; + } + + priv = netdev_priv(ndev); + priv->device = &(pdev->dev); + priv->dev = ndev; + plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data); + priv->bus_id = plat_dat->bus_id; + priv->pbl = plat_dat->pbl; /* TLI */ + priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ + + platform_set_drvdata(pdev, ndev); + + /* Set the I/O base addr */ + ndev->base_addr = (unsigned long)addr; + + /* MAC HW revice detection */ + ret = stmmac_mac_device_setup(ndev); + if (ret < 0) + goto out; + + /* Network Device Registration */ + ret = stmmac_probe(ndev); + if (ret < 0) + goto out; + + /* associate a PHY - it is provided by another platform bus */ + if (!driver_for_each_device + (&(stmmacphy_driver.driver), NULL, (void *)priv, + stmmac_associate_phy)) { + pr_err("No PHY device is associated with this MAC!\n"); + ret = -ENODEV; + goto out; + } + + priv->fix_mac_speed = plat_dat->fix_mac_speed; + priv->bsp_priv = plat_dat->bsp_priv; + + pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n" + "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name, + pdev->id, ndev->irq, (unsigned int)addr); + + /* MDIO bus Registration */ + pr_debug("\tMDIO bus (id: %d)...", priv->bus_id); + ret = stmmac_mdio_register(ndev); + if (ret < 0) + goto out; + pr_debug("registered!\n"); + +out: + if (ret < 0) { + platform_set_drvdata(pdev, NULL); + release_mem_region(res->start, (res->end - res->start)); + if (addr != NULL) + iounmap(addr); + } + + return ret; +} + +/** + * stmmac_dvr_remove + * @pdev: platform device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings, + * unregisters the MDIO bus and unmaps the allocated memory. + */ +static int stmmac_dvr_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct resource *res; + + pr_info("%s:\n\tremoving driver", __func__); + + stmmac_dma_stop_rx(ndev->base_addr); + stmmac_dma_stop_tx(ndev->base_addr); + + stmmac_mac_disable_rx(ndev->base_addr); + stmmac_mac_disable_tx(ndev->base_addr); + + netif_carrier_off(ndev); + + stmmac_mdio_unregister(ndev); + + platform_set_drvdata(pdev, NULL); + unregister_netdev(ndev); + + iounmap((void *)ndev->base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, (res->end - res->start)); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + int dis_ic = 0; + + if (!dev || !netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (state.event == PM_EVENT_SUSPEND) { + netif_device_detach(dev); + netif_stop_queue(dev); + if (priv->phydev) + phy_stop(priv->phydev); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_stop(); + dis_ic = 1; +#endif + napi_disable(&priv->napi); + + /* Stop TX/RX DMA */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, + priv->dma_rx_size, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, + priv->dma_tx_size); + + stmmac_mac_disable_tx(dev->base_addr); + + if (device_may_wakeup(&(pdev->dev))) { + /* Enable Power down mode by programming the PMT regs */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, + priv->wolopts); + } else { + stmmac_mac_disable_rx(dev->base_addr); + } + } else { + priv->shutdown = 1; + /* Although this can appear slightly redundant it actually + * makes fast the standby operation and guarantees the driver + * working if hibernation is on media. */ + stmmac_release(dev); + } + + spin_unlock(&priv->lock); + return 0; +} + +static int stmmac_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + if (!netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (priv->shutdown) { + /* Re-open the interface and re-init the MAC/DMA + and the rings. */ + stmmac_open(dev); + goto out_resume; + } + + /* Power Down bit, into the PM register, is cleared + * automatically as soon as a magic packet or a Wake-up frame + * is received. Anyway, it's better to manually clear + * this bit because it can generate problems while resuming + * from another devices (e.g. serial console). */ + if (device_may_wakeup(&(pdev->dev))) + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, 0); + + netif_device_attach(dev); + + /* Enable the MAC and DMA */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + napi_enable(&priv->napi); + + if (priv->phydev) + phy_start(priv->phydev); + + netif_start_queue(dev); + +out_resume: + spin_unlock(&priv->lock); + return 0; +} +#endif + +static struct platform_driver stmmac_driver = { + .driver = { + .name = STMMAC_RESOURCE_NAME, + }, + .probe = stmmac_dvr_probe, + .remove = stmmac_dvr_remove, +#ifdef CONFIG_PM + .suspend = stmmac_suspend, + .resume = stmmac_resume, +#endif + +}; + +/** + * stmmac_init_module - Entry point for the driver + * Description: This function is the entry point for the driver. + */ +static int __init stmmac_init_module(void) +{ + int ret; + + if (platform_driver_register(&stmmacphy_driver)) { + pr_err("No PHY devices registered!\n"); + return -ENODEV; + } + + ret = platform_driver_register(&stmmac_driver); + return ret; +} + +/** + * stmmac_cleanup_module - Cleanup routine for the driver + * Description: This function is the cleanup routine for the driver. + */ +static void __exit stmmac_cleanup_module(void) +{ + platform_driver_unregister(&stmmacphy_driver); + platform_driver_unregister(&stmmac_driver); +} + +#ifndef MODULE +static int __init stmmac_cmdline_opt(char *str) +{ + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "debug:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&debug); + else if (!strncmp(opt, "phyaddr:", 8)) + strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr); + else if (!strncmp(opt, "dma_txsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_txsize); + else if (!strncmp(opt, "dma_rxsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_rxsize); + else if (!strncmp(opt, "buf_sz:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz); + else if (!strncmp(opt, "tc:", 3)) + strict_strtoul(opt + 3, 0, (unsigned long *)&tc); + else if (!strncmp(opt, "tx_coe:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe); + else if (!strncmp(opt, "watchdog:", 9)) + strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog); + else if (!strncmp(opt, "flow_ctrl:", 10)) + strict_strtoul(opt + 10, 0, + (unsigned long *)&flow_ctrl); + else if (!strncmp(opt, "pause:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&pause); +#ifdef CONFIG_STMMAC_TIMER + else if (!strncmp(opt, "tmrate:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate); +#endif + } + return 0; +} + +__setup("stmmaceth=", stmmac_cmdline_opt); +#endif + +module_init(stmmac_init_module); +module_exit(stmmac_cleanup_module); + +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c new file mode 100644 index 00000000000..8498552a22f --- /dev/null +++ b/drivers/net/stmmac/stmmac_mdio.c @@ -0,0 +1,217 @@ +/******************************************************************************* + STMMAC Ethernet Driver -- MDIO bus implementation + Provides Bus interface for MII registers + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Carl Shaw <carl.shaw@st.com> + Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define MII_BUSY 0x00000001 +#define MII_WRITE 0x00000002 + +/** + * stmmac_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * Description: it reads data from the MII register from within the phy device. + * For the 7111 GMAC, we must set the bit 0 in the MII address register while + * accessing the PHY registers. + * Fortunately, it seems this has no drawback for the 7109 MAC. + */ +static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + int data; + u16 regValue = (((phyaddr << 11) & (0x0000F800)) | + ((phyreg << 6) & (0x000007C0))); + regValue |= MII_BUSY; /* in case of GMAC */ + + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + writel(regValue, ioaddr + mii_address); + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Read the data from the MII data register */ + data = (int)readl(ioaddr + mii_data); + + return data; +} + +/** + * stmmac_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * @phydata: phy data + * Description: it writes the data into the MII register from within the device. + */ +static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + u16 value = + (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) + | MII_WRITE; + + value |= MII_BUSY; + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Set the MII address register to write */ + writel(phydata, ioaddr + mii_data); + writel(value, ioaddr + mii_address); + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + return 0; +} + +/** + * stmmac_mdio_reset + * @bus: points to the mii_bus structure + * Description: reset the MII bus + */ +static int stmmac_mdio_reset(struct mii_bus *bus) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + + if (priv->phy_reset) { + pr_debug("stmmac_mdio_reset: calling phy_reset\n"); + priv->phy_reset(priv->bsp_priv); + } + + /* This is a workaround for problems with the STE101P PHY. + * It doesn't complete its reset until at least one clock cycle + * on MDC, so perform a dummy mdio read. + */ + writel(0, ioaddr + mii_address); + + return 0; +} + +/** + * stmmac_mdio_register + * @ndev: net device structure + * Description: it registers the MII bus + */ +int stmmac_mdio_register(struct net_device *ndev) +{ + int err = 0; + struct mii_bus *new_bus; + int *irqlist; + struct stmmac_priv *priv = netdev_priv(ndev); + int addr, found; + + new_bus = mdiobus_alloc(); + if (new_bus == NULL) + return -ENOMEM; + + irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (irqlist == NULL) { + err = -ENOMEM; + goto irqlist_alloc_fail; + } + + /* Assign IRQ to phy at address phy_addr */ + if (priv->phy_addr != -1) + irqlist[priv->phy_addr] = priv->phy_irq; + + new_bus->name = "STMMAC MII Bus"; + new_bus->read = &stmmac_mdio_read; + new_bus->write = &stmmac_mdio_write; + new_bus->reset = &stmmac_mdio_reset; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + new_bus->priv = ndev; + new_bus->irq = irqlist; + new_bus->phy_mask = priv->phy_mask; + new_bus->parent = priv->device; + err = mdiobus_register(new_bus); + if (err != 0) { + pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); + goto bus_register_fail; + } + + priv->mii = new_bus; + + found = 0; + for (addr = 0; addr < 32; addr++) { + struct phy_device *phydev = new_bus->phy_map[addr]; + if (phydev) { + if (priv->phy_addr == -1) { + priv->phy_addr = addr; + phydev->irq = priv->phy_irq; + irqlist[addr] = priv->phy_irq; + } + pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n", + ndev->name, phydev->phy_id, addr, + phydev->irq, dev_name(&phydev->dev), + (addr == priv->phy_addr) ? " active" : ""); + found = 1; + } + } + + if (!found) + pr_warning("%s: No PHY found\n", ndev->name); + + return 0; +bus_register_fail: + kfree(irqlist); +irqlist_alloc_fail: + kfree(new_bus); + return err; +} + +/** + * stmmac_mdio_unregister + * @ndev: net device structure + * Description: it unregisters the MII bus + */ +int stmmac_mdio_unregister(struct net_device *ndev) +{ + struct stmmac_priv *priv = netdev_priv(ndev); + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + kfree(priv->mii); + + return 0; +} diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c new file mode 100644 index 00000000000..b838c658207 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.c @@ -0,0 +1,140 @@ +/******************************************************************************* + STMMAC external timer support. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/kernel.h> +#include <linux/etherdevice.h> +#include "stmmac_timer.h" + +static void stmmac_timer_handler(void *data) +{ + struct net_device *dev = (struct net_device *)data; + + stmmac_schedule(dev); + + return; +} + +#define STMMAC_TIMER_MSG(timer, freq) \ +printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq); + +#if defined(CONFIG_STMMAC_RTC_TIMER) +#include <linux/rtc.h> +static struct rtc_device *stmmac_rtc; +static rtc_task_t stmmac_task; + +static void stmmac_rtc_start(unsigned int new_freq) +{ + rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq); + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1); + return; +} + +static void stmmac_rtc_stop(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + stmmac_task.private_data = dev; + stmmac_task.func = stmmac_timer_handler; + + stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + if (stmmac_rtc == NULL) { + pr_error("open rtc device failed\n"); + return -ENODEV; + } + + rtc_irq_register(stmmac_rtc, &stmmac_task); + + /* Periodic mode is not supported */ + if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { + pr_error("set periodic failed\n"); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return -1; + } + + STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq); + + tm->timer_start = stmmac_rtc_start; + tm->timer_stop = stmmac_rtc_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return 0; +} + +#elif defined(CONFIG_STMMAC_TMU_TIMER) +#include <linux/clk.h> +#define TMU_CHANNEL "tmu2_clk" +static struct clk *timer_clock; + +static void stmmac_tmu_start(unsigned int new_freq) +{ + clk_set_rate(timer_clock, new_freq); + clk_enable(timer_clock); + return; +} + +static void stmmac_tmu_stop(void) +{ + clk_disable(timer_clock); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + timer_clock = clk_get(NULL, TMU_CHANNEL); + + if (timer_clock == NULL) + return -1; + + if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { + timer_clock = NULL; + return -1; + } + + STMMAC_TIMER_MSG("TMU2", tm->freq); + tm->timer_start = stmmac_tmu_start; + tm->timer_stop = stmmac_tmu_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + clk_disable(timer_clock); + tmu2_unregister_user(); + clk_put(timer_clock); + return 0; +} +#endif diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h new file mode 100644 index 00000000000..f795cae3372 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.h @@ -0,0 +1,41 @@ +/******************************************************************************* + STMMAC external timer Header File. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +struct stmmac_timer { + void (*timer_start) (unsigned int new_freq); + void (*timer_stop) (void); + unsigned int freq; +}; + +/* Open the HW timer device and return 0 in case of success */ +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm); +/* Stop the timer and release it */ +int stmmac_close_ext_timer(void); +/* Function used for scheduling task within the stmmac */ +void stmmac_schedule(struct net_device *dev); + +#if defined(CONFIG_STMMAC_TMU_TIMER) +extern int tmu2_register_user(void *fnt, void *data); +extern void tmu2_unregister_user(void); +#endif |