diff options
Diffstat (limited to 'drivers/net')
57 files changed, 1525 insertions, 305 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 4c08018d733..71ba18efa15 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1270,9 +1270,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) if (slave_ops->ndo_set_mac_address == NULL) { if (!bond_has_slaves(bond)) { - pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.", - bond_dev->name); - bond->params.fail_over_mac = BOND_FOM_ACTIVE; + pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address.\n", + bond_dev->name); + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) { + bond->params.fail_over_mac = BOND_FOM_ACTIVE; + pr_warn("%s: Setting fail_over_mac to active for active-backup mode.\n", + bond_dev->name); + } } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) { pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n", bond_dev->name); @@ -1315,7 +1319,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) */ memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); - if (!bond->params.fail_over_mac) { + if (!bond->params.fail_over_mac || + bond->params.mode != BOND_MODE_ACTIVEBACKUP) { /* * Set slave to master's mac address. The application already * set the master's mac address to that of the first slave @@ -1505,7 +1510,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) slave_dev->npinfo = bond->dev->npinfo; if (slave_dev->npinfo) { if (slave_enable_netpoll(new_slave)) { - read_unlock(&bond->lock); pr_info("Error, %s: master_dev is using netpoll, " "but new slave device does not support netpoll.\n", bond_dev->name); @@ -1579,7 +1583,8 @@ err_close: dev_close(slave_dev); err_restore_mac: - if (!bond->params.fail_over_mac) { + if (!bond->params.fail_over_mac || + bond->params.mode != BOND_MODE_ACTIVEBACKUP) { /* XXX TODO - fom follow mode needs to change master's * MAC if this slave's MAC is in use by the bond, or at * least print a warning. @@ -1672,7 +1677,8 @@ static int __bond_release_one(struct net_device *bond_dev, bond->current_arp_slave = NULL; - if (!all && !bond->params.fail_over_mac) { + if (!all && (!bond->params.fail_over_mac || + bond->params.mode != BOND_MODE_ACTIVEBACKUP)) { if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) && bond_has_slaves(bond)) pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n", @@ -1769,7 +1775,8 @@ static int __bond_release_one(struct net_device *bond_dev, /* close slave before restoring its mac address */ dev_close(slave_dev); - if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) { + if (bond->params.fail_over_mac != BOND_FOM_ACTIVE || + bond->params.mode != BOND_MODE_ACTIVEBACKUP) { /* restore original ("permanent") mac address */ memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); addr.sa_family = slave_dev->type; @@ -3431,7 +3438,8 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr) /* If fail_over_mac is enabled, do nothing and return success. * Returning an error causes ifenslave to fail. */ - if (bond->params.fail_over_mac) + if (bond->params.fail_over_mac && + bond->params.mode == BOND_MODE_ACTIVEBACKUP) return 0; if (!is_valid_ether_addr(sa->sa_data)) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index d447b881bbd..9e7d95dae2c 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -104,7 +104,7 @@ config CAN_JANZ_ICAN3 config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" - depends on (ARM && CPU_LITTLE_ENDIAN) || PPC + depends on ARM || PPC ---help--- Say Y here if you want to support for Freescale FlexCAN. diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 13a909822e2..fc59bc6f040 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -323,19 +323,10 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, } if (!priv->echo_skb[idx]) { - struct sock *srcsk = skb->sk; - if (atomic_read(&skb->users) != 1) { - struct sk_buff *old_skb = skb; - - skb = skb_clone(old_skb, GFP_ATOMIC); - kfree_skb(old_skb); - if (!skb) - return; - } else - skb_orphan(skb); - - skb->sk = srcsk; + skb = can_create_echo_skb(skb); + if (!skb) + return; /* make settings for echo to reduce code in irq context */ skb->protocol = htons(ETH_P_CAN); diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index aaed97bee47..320bef2dba4 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -235,9 +235,12 @@ static const struct can_bittiming_const flexcan_bittiming_const = { }; /* - * Abstract off the read/write for arm versus ppc. + * Abstract off the read/write for arm versus ppc. This + * assumes that PPC uses big-endian registers and everything + * else uses little-endian registers, independent of CPU + * endianess. */ -#if defined(__BIG_ENDIAN) +#if defined(CONFIG_PPC) static inline u32 flexcan_read(void __iomem *addr) { return in_be32(addr); diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index e24e6690d67..71594e5676f 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -18,6 +18,7 @@ #include <linux/netdevice.h> #include <linux/can.h> #include <linux/can/dev.h> +#include <linux/can/skb.h> #include <linux/can/error.h> #include <linux/mfd/janz.h> @@ -1133,20 +1134,9 @@ static void ican3_handle_message(struct ican3_dev *mod, struct ican3_msg *msg) */ static void ican3_put_echo_skb(struct ican3_dev *mod, struct sk_buff *skb) { - struct sock *srcsk = skb->sk; - - if (atomic_read(&skb->users) != 1) { - struct sk_buff *old_skb = skb; - - skb = skb_clone(old_skb, GFP_ATOMIC); - kfree_skb(old_skb); - if (!skb) - return; - } else { - skb_orphan(skb); - } - - skb->sk = srcsk; + skb = can_create_echo_skb(skb); + if (!skb) + return; /* save this skb for tx interrupt echo handling */ skb_queue_tail(&mod->echoq, skb); @@ -1322,7 +1312,7 @@ static int ican3_napi(struct napi_struct *napi, int budget) /* process all communication messages */ while (true) { - struct ican3_msg msg; + struct ican3_msg uninitialized_var(msg); ret = ican3_recv_msg(mod, &msg); if (ret) break; diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c index 0a2a5ee79a1..4e94057ef5c 100644 --- a/drivers/net/can/vcan.c +++ b/drivers/net/can/vcan.c @@ -46,6 +46,7 @@ #include <linux/if_ether.h> #include <linux/can.h> #include <linux/can/dev.h> +#include <linux/can/skb.h> #include <linux/slab.h> #include <net/rtnetlink.h> @@ -109,25 +110,23 @@ static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev) stats->rx_packets++; stats->rx_bytes += cfd->len; } - kfree_skb(skb); + consume_skb(skb); return NETDEV_TX_OK; } /* perform standard echo handling for CAN network interfaces */ if (loop) { - struct sock *srcsk = skb->sk; - skb = skb_share_check(skb, GFP_ATOMIC); + skb = can_create_echo_skb(skb); if (!skb) return NETDEV_TX_OK; /* receive with packet counting */ - skb->sk = srcsk; vcan_rx(skb, dev); } else { /* no looped packets => no counting */ - kfree_skb(skb); + consume_skb(skb); } return NETDEV_TX_OK; } diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index 0f4241c6e97..238ccea965c 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -3294,7 +3294,6 @@ static int __init vortex_init(void) static void __exit vortex_eisa_cleanup(void) { - struct vortex_private *vp; void __iomem *ioaddr; #ifdef CONFIG_EISA @@ -3303,7 +3302,6 @@ static void __exit vortex_eisa_cleanup(void) #endif if (compaq_net_device) { - vp = netdev_priv(compaq_net_device); ioaddr = ioport_map(compaq_net_device->base_addr, VORTEX_TOTAL_SIZE); diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 0cc21437478..511f6eecd58 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -929,6 +929,9 @@ static int emac_resume(struct platform_device *dev) } static const struct of_device_id emac_of_match[] = { + {.compatible = "allwinner,sun4i-a10-emac",}, + + /* Deprecated */ {.compatible = "allwinner,sun4i-emac",}, {}, }; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index e92ffd6e1c1..2e45f6ec1bf 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1292,6 +1292,7 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) alx = netdev_priv(netdev); spin_lock_init(&alx->hw.mdio_lock); spin_lock_init(&alx->irq_lock); + spin_lock_init(&alx->stats_lock); alx->dev = netdev; alx->hw.pdev = pdev; alx->msg_enable = NETIF_MSG_LINK | NETIF_MSG_HW | NETIF_MSG_IFUP | diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 9d2dedadf2d..cda25ac45b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -85,7 +85,7 @@ MODULE_FIRMWARE(FW_RV2P_FILE_09_Ax); static int disable_msi = 0; -module_param(disable_msi, int, 0); +module_param(disable_msi, int, S_IRUGO); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); typedef enum { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 17d1689aec6..bfc58d488bb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -936,7 +936,7 @@ static inline int bnx2x_func_start(struct bnx2x *bp) else /* CHIP_IS_E1X */ start_params->network_cos_mode = FW_WRR; - start_params->gre_tunnel_mode = IPGRE_TUNNEL; + start_params->gre_tunnel_mode = L2GRE_TUNNEL; start_params->gre_tunnel_rss = GRE_INNER_HEADERS_RSS; return bnx2x_func_state_change(bp, &func_params); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c9c445e7b4a..7d438228645 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -95,29 +95,29 @@ MODULE_FIRMWARE(FW_FILE_NAME_E1H); MODULE_FIRMWARE(FW_FILE_NAME_E2); int bnx2x_num_queues; -module_param_named(num_queues, bnx2x_num_queues, int, 0); +module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO); MODULE_PARM_DESC(num_queues, " Set number of queues (default is as a number of CPUs)"); static int disable_tpa; -module_param(disable_tpa, int, 0); +module_param(disable_tpa, int, S_IRUGO); MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); static int int_mode; -module_param(int_mode, int, 0); +module_param(int_mode, int, S_IRUGO); MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " "(1 INT#x; 2 MSI)"); static int dropless_fc; -module_param(dropless_fc, int, 0); +module_param(dropless_fc, int, S_IRUGO); MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); static int mrrs = -1; -module_param(mrrs, int, 0); +module_param(mrrs, int, S_IRUGO); MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); static int debug; -module_param(debug, int, 0); +module_param(debug, int, S_IRUGO); MODULE_PARM_DESC(debug, " Default debug msglevel"); struct workqueue_struct *bnx2x_wq; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index aec5ef2ed7c..e42f48df6e9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1446,12 +1446,12 @@ static void bnx2x_vf_igu_reset(struct bnx2x *bp, struct bnx2x_virtf *vf) if (vf->cfg_flags & VF_CFG_INT_SIMD) val |= IGU_VF_CONF_SINGLE_ISR_EN; val &= ~IGU_VF_CONF_PARENT_MASK; - val |= BP_FUNC(bp) << IGU_VF_CONF_PARENT_SHIFT; /* parent PF */ + val |= (BP_ABS_FUNC(bp) >> 1) << IGU_VF_CONF_PARENT_SHIFT; REG_WR(bp, IGU_REG_VF_CONFIGURATION, val); DP(BNX2X_MSG_IOV, - "value in IGU_REG_VF_CONFIGURATION of vf %d after write %x\n", - vf->abs_vfid, REG_RD(bp, IGU_REG_VF_CONFIGURATION)); + "value in IGU_REG_VF_CONFIGURATION of vf %d after write is 0x%08x\n", + vf->abs_vfid, val); bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index e2ca03e23dc..3167ed6593b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2609,13 +2609,14 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_CTRL1000, phy9_orig); - if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) { - reg32 &= ~0x3000; - tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32); - } else if (!err) - err = -EBUSY; + err = tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32); + if (err) + return err; - return err; + reg32 &= ~0x3000; + tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32); + + return 0; } static void tg3_carrier_off(struct tg3 *tp) @@ -14113,12 +14114,12 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) tg3_netif_stop(tp); + tg3_set_mtu(dev, tp, new_mtu); + tg3_full_lock(tp, 1); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - tg3_set_mtu(dev, tp, new_mtu); - /* Reset PHY, otherwise the read DMA engine will be in a mode that * breaks all requests to 256 bytes. */ diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 4de8cfd149c..55e0fa03dc9 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/etherdevice.h> +#include <linux/clk.h> #include <linux/crc32.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -51,6 +52,7 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); #define ETH_HASH0 0x48 #define ETH_HASH1 0x4c #define ETH_TXCTRL 0x50 +#define ETH_END 0x54 /* mode register */ #define MODER_RXEN (1 << 0) /* receive enable */ @@ -179,6 +181,7 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); * @membase: pointer to buffer memory region * @dma_alloc: dma allocated buffer size * @io_region_size: I/O memory region size + * @num_bd: number of buffer descriptors * @num_tx: number of send buffers * @cur_tx: last send buffer written * @dty_tx: last buffer actually sent @@ -199,6 +202,7 @@ struct ethoc { int dma_alloc; resource_size_t io_region_size; + unsigned int num_bd; unsigned int num_tx; unsigned int cur_tx; unsigned int dty_tx; @@ -216,6 +220,7 @@ struct ethoc { struct phy_device *phy; struct mii_bus *mdio; + struct clk *clk; s8 phy_id; }; @@ -688,6 +693,11 @@ static int ethoc_mdio_probe(struct net_device *dev) } priv->phy = phy; + phy->advertising &= ~(ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half); + phy->supported &= ~(SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + return 0; } @@ -890,6 +900,102 @@ out: return NETDEV_TX_OK; } +static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ethoc *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phy; + + if (!phydev) + return -EOPNOTSUPP; + + return phy_ethtool_gset(phydev, cmd); +} + +static int ethoc_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ethoc *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phy; + + if (!phydev) + return -EOPNOTSUPP; + + return phy_ethtool_sset(phydev, cmd); +} + +static int ethoc_get_regs_len(struct net_device *netdev) +{ + return ETH_END; +} + +static void ethoc_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct ethoc *priv = netdev_priv(dev); + u32 *regs_buff = p; + unsigned i; + + regs->version = 0; + for (i = 0; i < ETH_END / sizeof(u32); ++i) + regs_buff[i] = ethoc_read(priv, i * sizeof(u32)); +} + +static void ethoc_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *ring) +{ + struct ethoc *priv = netdev_priv(dev); + + ring->rx_max_pending = priv->num_bd - 1; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->tx_max_pending = priv->num_bd - 1; + + ring->rx_pending = priv->num_rx; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; + ring->tx_pending = priv->num_tx; +} + +static int ethoc_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *ring) +{ + struct ethoc *priv = netdev_priv(dev); + + if (ring->tx_pending < 1 || ring->rx_pending < 1 || + ring->tx_pending + ring->rx_pending > priv->num_bd) + return -EINVAL; + if (ring->rx_mini_pending || ring->rx_jumbo_pending) + return -EINVAL; + + if (netif_running(dev)) { + netif_tx_disable(dev); + ethoc_disable_rx_and_tx(priv); + ethoc_disable_irq(priv, INT_MASK_TX | INT_MASK_RX); + synchronize_irq(dev->irq); + } + + priv->num_tx = rounddown_pow_of_two(ring->tx_pending); + priv->num_rx = ring->rx_pending; + ethoc_init_ring(priv, dev->mem_start); + + if (netif_running(dev)) { + ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX); + ethoc_enable_rx_and_tx(priv); + netif_wake_queue(dev); + } + return 0; +} + +const struct ethtool_ops ethoc_ethtool_ops = { + .get_settings = ethoc_get_settings, + .set_settings = ethoc_set_settings, + .get_regs_len = ethoc_get_regs_len, + .get_regs = ethoc_get_regs, + .get_link = ethtool_op_get_link, + .get_ringparam = ethoc_get_ringparam, + .set_ringparam = ethoc_set_ringparam, + .get_ts_info = ethtool_op_get_ts_info, +}; + static const struct net_device_ops ethoc_netdev_ops = { .ndo_open = ethoc_open, .ndo_stop = ethoc_stop, @@ -917,6 +1023,8 @@ static int ethoc_probe(struct platform_device *pdev) int num_bd; int ret = 0; bool random_mac = false; + struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev); + u32 eth_clkfreq = pdata ? pdata->eth_clkfreq : 0; /* allocate networking device */ netdev = alloc_etherdev(sizeof(struct ethoc)); @@ -1016,6 +1124,7 @@ static int ethoc_probe(struct platform_device *pdev) ret = -ENODEV; goto error; } + priv->num_bd = num_bd; /* num_tx must be a power of two */ priv->num_tx = rounddown_pow_of_two(num_bd >> 1); priv->num_rx = num_bd - priv->num_tx; @@ -1030,8 +1139,7 @@ static int ethoc_probe(struct platform_device *pdev) } /* Allow the platform setup code to pass in a MAC address. */ - if (dev_get_platdata(&pdev->dev)) { - struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev); + if (pdata) { memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN); priv->phy_id = pdata->phy_id; } else { @@ -1069,6 +1177,27 @@ static int ethoc_probe(struct platform_device *pdev) if (random_mac) netdev->addr_assign_type = NET_ADDR_RANDOM; + /* Allow the platform setup code to adjust MII management bus clock. */ + if (!eth_clkfreq) { + struct clk *clk = devm_clk_get(&pdev->dev, NULL); + + if (!IS_ERR(clk)) { + priv->clk = clk; + clk_prepare_enable(clk); + eth_clkfreq = clk_get_rate(clk); + } + } + if (eth_clkfreq) { + u32 clkdiv = MIIMODER_CLKDIV(eth_clkfreq / 2500000 + 1); + + if (!clkdiv) + clkdiv = 2; + dev_dbg(&pdev->dev, "setting MII clkdiv to %u\n", clkdiv); + ethoc_write(priv, MIIMODER, + (ethoc_read(priv, MIIMODER) & MIIMODER_NOPRE) | + clkdiv); + } + /* register MII bus */ priv->mdio = mdiobus_alloc(); if (!priv->mdio) { @@ -1111,6 +1240,7 @@ static int ethoc_probe(struct platform_device *pdev) netdev->netdev_ops = ðoc_netdev_ops; netdev->watchdog_timeo = ETHOC_TIMEOUT; netdev->features |= 0; + netdev->ethtool_ops = ðoc_ethtool_ops; /* setup NAPI */ netif_napi_add(netdev, &priv->napi, ethoc_poll, 64); @@ -1133,6 +1263,8 @@ free_mdio: kfree(priv->mdio->irq); mdiobus_free(priv->mdio); free: + if (priv->clk) + clk_disable_unprepare(priv->clk); free_netdev(netdev); out: return ret; @@ -1157,6 +1289,8 @@ static int ethoc_remove(struct platform_device *pdev) kfree(priv->mdio->irq); mdiobus_free(priv->mdio); } + if (priv->clk) + clk_disable_unprepare(priv->clk); unregister_netdev(netdev); free_netdev(netdev); } diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index cbaba4442d4..bf7a01ef9a5 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -3034,7 +3034,7 @@ static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake) *enable_wake = false; } - pci_disable_device(pdev); + pci_clear_master(pdev); } static int __e100_power_off(struct pci_dev *pdev, bool wake) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 1ded50ca160..e46e8698e63 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -726,9 +726,6 @@ static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) int vpath_idx = 0; enum vxge_hw_status status = VXGE_HW_OK; struct vxge_vpath *vpath = NULL; - struct __vxge_hw_device *hldev; - - hldev = pci_get_drvdata(vdev->pdev); mac_address = (u8 *)&mac_addr; memcpy(mac_address, mac_header, ETH_ALEN); @@ -2443,9 +2440,6 @@ static void vxge_rem_msix_isr(struct vxgedev *vdev) static void vxge_rem_isr(struct vxgedev *vdev) { - struct __vxge_hw_device *hldev; - hldev = pci_get_drvdata(vdev->pdev); - #ifdef CONFIG_PCI_MSI if (vdev->config.intr_type == MSI_X) { vxge_rem_msix_isr(vdev); diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index c49d1fb1696..75d11fa4eb0 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -429,7 +429,9 @@ netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb) } /* Transfer ownership of the skb to the final buffer */ +#ifdef EFX_USE_PIO finish_packet: +#endif buffer->skb = skb; buffer->flags = EFX_TX_BUF_SKB | dma_flags; diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index bde63e3af96..1d860ce914e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1878,8 +1878,18 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); phyid = be32_to_cpup(parp+1); mdio = of_find_device_by_node(mdio_node); - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, mdio->name, phyid); + + if (strncmp(mdio->name, "gpio", 4) == 0) { + /* GPIO bitbang MDIO driver attached */ + struct mii_bus *bus = dev_get_drvdata(&mdio->dev); + + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, bus->id, phyid); + } else { + /* davinci MDIO driver attached */ + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, mdio->name, phyid); + } mac_addr = of_get_mac_address(slave_node); if (mac_addr) diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 2dc82f1d2e7..3da44d5d914 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -210,13 +210,6 @@ config KINGSUN_DONGLE To compile it as a module, choose M here: the module will be called kingsun-sir. -config EP7211_DONGLE - tristate "Cirrus Logic clps711x I/R support" - depends on IRTTY_SIR && ARCH_CLPS711X && IRDA - help - Say Y here if you want to build support for the Cirrus logic - EP7211 chipset's infrared module. - config KSDAZZLE_DONGLE tristate "KingSun Dazzle IrDA-USB dongle" depends on IRDA && USB diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index dfc64537f62..be8ab5b9a4a 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o -obj-$(CONFIG_EP7211_DONGLE) += ep7211-sir.o obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o obj-$(CONFIG_KSDAZZLE_DONGLE) += ksdazzle-sir.o obj-$(CONFIG_KS959_DONGLE) += ks959-sir.o diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c deleted file mode 100644 index 5fe1f4dd336..00000000000 --- a/drivers/net/irda/ep7211-sir.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * IR port driver for the Cirrus Logic CLPS711X processors - * - * Copyright 2001, Blue Mug Inc. All rights reserved. - * Copyright 2007, Samuel Ortiz <samuel@sortiz.org> - */ - -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> - -#include "sir-dev.h" - -static int clps711x_dongle_open(struct sir_dev *dev) -{ - unsigned int syscon; - - /* Turn on the SIR encoder. */ - syscon = clps_readl(SYSCON1); - syscon |= SYSCON1_SIREN; - clps_writel(syscon, SYSCON1); - - return 0; -} - -static int clps711x_dongle_close(struct sir_dev *dev) -{ - unsigned int syscon; - - /* Turn off the SIR encoder. */ - syscon = clps_readl(SYSCON1); - syscon &= ~SYSCON1_SIREN; - clps_writel(syscon, SYSCON1); - - return 0; -} - -static struct dongle_driver clps711x_dongle = { - .owner = THIS_MODULE, - .driver_name = "EP7211 IR driver", - .type = IRDA_EP7211_DONGLE, - .open = clps711x_dongle_open, - .close = clps711x_dongle_close, -}; - -static int clps711x_sir_probe(struct platform_device *pdev) -{ - return irda_register_dongle(&clps711x_dongle); -} - -static int clps711x_sir_remove(struct platform_device *pdev) -{ - return irda_unregister_dongle(&clps711x_dongle); -} - -static struct platform_driver clps711x_sir_driver = { - .driver = { - .name = "sir-clps711x", - .owner = THIS_MODULE, - }, - .probe = clps711x_sir_probe, - .remove = clps711x_sir_remove, -}; -module_platform_driver(clps711x_sir_driver); - -MODULE_AUTHOR("Samuel Ortiz <samuel@sortiz.org>"); -MODULE_DESCRIPTION("EP7211 IR dongle driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("irda-dongle-13"); /* IRDA_EP7211_DONGLE */ diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 547725fa867..9414fa27216 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -437,7 +437,10 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp, if (on) { gpio_num = gpio_tab[EXTTS0_GPIO + index]; evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT; - evnt |= EVNT_RISE; + if (rq->extts.flags & PTP_FALLING_EDGE) + evnt |= EVNT_FALL; + else + evnt |= EVNT_RISE; } ext_write(0, phydev, PAGE5, PTP_EVNT, evnt); return 0; @@ -1058,6 +1061,13 @@ static void dp83640_remove(struct phy_device *phydev) kfree(dp83640); } +static int dp83640_config_init(struct phy_device *phydev) +{ + enable_status_frames(phydev, true); + ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); + return 0; +} + static int dp83640_ack_interrupt(struct phy_device *phydev) { int err = phy_read(phydev, MII_DP83640_MISR); @@ -1195,11 +1205,6 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) mutex_lock(&dp83640->clock->extreg_lock); - if (dp83640->hwts_tx_en || dp83640->hwts_rx_en) { - enable_status_frames(phydev, true); - ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); - } - ext_write(0, phydev, PAGE5, PTP_TXCFG0, txcfg0); ext_write(0, phydev, PAGE5, PTP_RXCFG0, rxcfg0); @@ -1281,6 +1286,7 @@ static void dp83640_txtstamp(struct phy_device *phydev, } /* fall through */ case HWTSTAMP_TX_ON: + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; skb_queue_tail(&dp83640->tx_queue, skb); schedule_work(&dp83640->ts_work); break; @@ -1330,6 +1336,7 @@ static struct phy_driver dp83640_driver = { .flags = PHY_HAS_INTERRUPT, .probe = dp83640_probe, .remove = dp83640_remove, + .config_init = dp83640_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = dp83640_ack_interrupt, diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c index bb88bc7d81f..9367acc84fb 100644 --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -170,6 +170,9 @@ static int sun4i_mdio_remove(struct platform_device *pdev) } static const struct of_device_id sun4i_mdio_dt_ids[] = { + { .compatible = "allwinner,sun4i-a10-mdio" }, + + /* Deprecated */ { .compatible = "allwinner,sun4i-mdio" }, { } }; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 4b03e63639b..82514e72b3d 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -719,7 +719,7 @@ int phy_resume(struct phy_device *phydev) static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; - int oldadv, adv; + int oldadv, adv, bmsr; int err, changed = 0; /* Only allow advertising what this PHY supports */ @@ -744,26 +744,36 @@ static int genphy_config_advert(struct phy_device *phydev) changed = 1; } + bmsr = phy_read(phydev, MII_BMSR); + if (bmsr < 0) + return bmsr; + + /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all + * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a + * logical 1. + */ + if (!(bmsr & BMSR_ESTATEN)) + return changed; + /* Configure gigabit if it's supported */ + adv = phy_read(phydev, MII_CTRL1000); + if (adv < 0) + return adv; + + oldadv = adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (phydev->supported & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { - adv = phy_read(phydev, MII_CTRL1000); - if (adv < 0) - return adv; - - oldadv = adv; - adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); - - if (adv != oldadv) { - err = phy_write(phydev, MII_CTRL1000, adv); - - if (err < 0) - return err; + if (adv != oldadv) changed = 1; - } } + err = phy_write(phydev, MII_CTRL1000, adv); + if (err < 0) + return err; + return changed; } diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 6b638a066c1..409499fdb15 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -292,6 +292,22 @@ config USB_NET_SR9700 This option adds support for CoreChip-sz SR9700 based USB 1.1 10/100 Ethernet adapters. +config USB_NET_SR9800 + tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + default y + ---help--- + Say Y if you want to use one of the following 100Mbps USB Ethernet + device based on the CoreChip-sz SR9800 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on eth0, if it is the only ethernet device, or perhaps on + eth1, if you have a PCI or ISA ethernet card installed. + + To compile this driver as a module, choose M here: the + module will be called sr9800. + config USB_NET_SMSC75XX tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index b17b5e88bba..433f0a00c68 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SR9700) += sr9700.o +obj-$(CONFIG_USB_NET_SR9800) += sr9800.o obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1a482344b3f..660bd5ea9fc 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1201,16 +1201,18 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) struct hso_serial *serial = urb->context; int status = urb->status; + D4("\n--- Got serial_read_bulk callback %02x ---", status); + /* sanity check */ if (!serial) { D1("serial == NULL"); return; - } else if (status) { + } + if (status) { handle_usb_error(status, __func__, serial->parent); return; } - D4("\n--- Got serial_read_bulk callback %02x ---", status); D1("Actual length = %d\n", urb->actual_length); DUMP1(urb->transfer_buffer, urb->actual_length); @@ -1218,25 +1220,13 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) if (serial->port.count == 0) return; - if (status == 0) { - if (serial->parent->port_spec & HSO_INFO_CRC_BUG) - fix_crc_bug(urb, serial->in_endp->wMaxPacketSize); - /* Valid data, handle RX data */ - spin_lock(&serial->serial_lock); - serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1; - put_rxbuf_data_and_resubmit_bulk_urb(serial); - spin_unlock(&serial->serial_lock); - } else if (status == -ENOENT || status == -ECONNRESET) { - /* Unlinked - check for throttled port. */ - D2("Port %d, successfully unlinked urb", serial->minor); - spin_lock(&serial->serial_lock); - serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; - hso_resubmit_rx_bulk_urb(serial, urb); - spin_unlock(&serial->serial_lock); - } else { - D2("Port %d, status = %d for read urb", serial->minor, status); - return; - } + if (serial->parent->port_spec & HSO_INFO_CRC_BUG) + fix_crc_bug(urb, serial->in_endp->wMaxPacketSize); + /* Valid data, handle RX data */ + spin_lock(&serial->serial_lock); + serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1; + put_rxbuf_data_and_resubmit_bulk_urb(serial); + spin_unlock(&serial->serial_lock); } /* diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 23bdd5b9274..ff5c87128ff 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -712,6 +712,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, {QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, {QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */ {QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, @@ -723,6 +724,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ + {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e8fac732c6f..d89dbe395ad 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2273,22 +2273,21 @@ static int rtl8152_open(struct net_device *netdev) struct r8152 *tp = netdev_priv(netdev); int res = 0; + rtl8152_set_speed(tp, AUTONEG_ENABLE, + tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, + DUPLEX_FULL); + tp->speed = 0; + netif_carrier_off(netdev); + netif_start_queue(netdev); + set_bit(WORK_ENABLE, &tp->flags); res = usb_submit_urb(tp->intr_urb, GFP_KERNEL); if (res) { if (res == -ENODEV) netif_device_detach(tp->netdev); netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n", res); - return res; } - rtl8152_set_speed(tp, AUTONEG_ENABLE, - tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, - DUPLEX_FULL); - tp->speed = 0; - netif_carrier_off(netdev); - netif_start_queue(netdev); - set_bit(WORK_ENABLE, &tp->flags); return res; } @@ -2298,8 +2297,8 @@ static int rtl8152_close(struct net_device *netdev) struct r8152 *tp = netdev_priv(netdev); int res = 0; - usb_kill_urb(tp->intr_urb); clear_bit(WORK_ENABLE, &tp->flags); + usb_kill_urb(tp->intr_urb); cancel_delayed_work_sync(&tp->schedule); netif_stop_queue(netdev); tasklet_disable(&tp->tl); diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c new file mode 100644 index 00000000000..4175eb9fdec --- /dev/null +++ b/drivers/net/usb/sr9800.c @@ -0,0 +1,870 @@ +/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices + * + * Author : Liu Junliang <liujunliang_ljl@163.com> + * + * Based on asix_common.c, asix_devices.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied.* + */ + +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/usbnet.h> +#include <linux/slab.h> +#include <linux/if_vlan.h> + +#include "sr9800.h" + +static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int err; + + err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index, + data, size); + if ((err != size) && (err >= 0)) + err = -EINVAL; + + return err; +} + +static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int err; + + err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index, + data, size); + if ((err != size) && (err >= 0)) + err = -EINVAL; + + return err; +} + +static void +sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data, + size); +} + +static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int offset = 0; + + while (offset + sizeof(u32) < skb->len) { + struct sk_buff *sr_skb; + u16 size; + u32 header = get_unaligned_le32(skb->data + offset); + + offset += sizeof(u32); + /* get the packet length */ + size = (u16) (header & 0x7ff); + if (size != ((~header >> 16) & 0x07ff)) { + netdev_err(dev->net, "%s : Bad Header Length\n", + __func__); + return 0; + } + + if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || + (size + offset > skb->len)) { + netdev_err(dev->net, "%s : Bad RX Length %d\n", + __func__, size); + return 0; + } + sr_skb = netdev_alloc_skb_ip_align(dev->net, size); + if (!sr_skb) + return 0; + + skb_put(sr_skb, size); + memcpy(sr_skb->data, skb->data + offset, size); + usbnet_skb_return(dev, sr_skb); + + offset += (size + 1) & 0xfffe; + } + + if (skb->len != offset) { + netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__, + skb->len); + return 0; + } + + return 1; +} + +static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 padbytes = 0xffff0000; + u32 packet_len; + int padlen; + + padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4; + + if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { + if ((headroom < 4) || (tailroom < padlen)) { + skb->data = memmove(skb->head + 4, skb->data, + skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + skb_push(skb, 4); + packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); + cpu_to_le32s(&packet_len); + skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); + + if (padlen) { + cpu_to_le32s(&padbytes); + memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + + return skb; +} + +static void sr_status(struct usbnet *dev, struct urb *urb) +{ + struct sr9800_int_data *event; + int link; + + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + usbnet_link_change(dev, link, 1); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } + + return; +} + +static inline int sr_set_sw_mii(struct usbnet *dev) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable software MII access\n"); + return ret; +} + +static inline int sr_set_hw_mii(struct usbnet *dev) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable hardware MII access\n"); + return ret; +} + +static inline int sr_get_phy_addr(struct usbnet *dev) +{ + u8 buf[2]; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf); + if (ret < 0) { + netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n", + __func__, ret); + goto out; + } + netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__, + *((__le16 *)buf)); + + ret = buf[1]; + +out: + return ret; +} + +static int sr_sw_reset(struct usbnet *dev, u8 flags) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to send software reset:%02x\n", + ret); + + return ret; +} + +static u16 sr_read_rx_ctl(struct usbnet *dev) +{ + __le16 v; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v); + if (ret < 0) { + netdev_err(dev->net, "Error reading RX_CTL register:%02x\n", + ret); + goto out; + } + + ret = le16_to_cpu(v); +out: + return ret; +} + +static int sr_write_rx_ctl(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode); + ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, + "Failed to write RX_CTL mode to 0x%04x:%02x\n", + mode, ret); + + return ret; +} + +static u16 sr_read_medium_status(struct usbnet *dev) +{ + __le16 v; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); + if (ret < 0) { + netdev_err(dev->net, + "Error reading Medium Status register:%02x\n", ret); + return ret; /* TODO: callers not checking for error ret */ + } + + return le16_to_cpu(v); +} + +static int sr_write_medium_mode(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode); + ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, + "Failed to write Medium Mode mode to 0x%04x:%02x\n", + mode, ret); + return ret; +} + +static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; + + netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value); + ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n", + value, ret); + if (sleep) + msleep(sleep); + + return ret; +} + +/* SR9800 have a 16-bit RX_CTL value */ +static void sr_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + u16 rx_ctl = SR_DEFAULT_RX_CTL; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= SR_RX_CTL_PRO; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > SR_MAX_MCAST) { + rx_ctl |= SR_RX_CTL_AMALL; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later + */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0, + SR_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= SR_RX_CTL_AM; + } + + sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int sr_mdio_read(struct net_device *net, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(net); + __le16 res; + + mutex_lock(&dev->phy_mutex); + sr_set_sw_mii(dev); + sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res); + sr_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); + + netdev_dbg(dev->net, + "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__, + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +static void +sr_mdio_write(struct net_device *net, int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(net); + __le16 res = cpu_to_le16(val); + + netdev_dbg(dev->net, + "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__, + phy_id, loc, val); + mutex_lock(&dev->phy_mutex); + sr_set_sw_mii(dev); + sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); + sr_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); +} + +/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ +static u32 sr_get_phyid(struct usbnet *dev) +{ + int phy_reg; + u32 phy_id; + int i; + + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) + return 0; + + phy_id = (phy_reg & 0xffff) << 16; + + phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); + if (phy_reg < 0) + return 0; + + phy_id |= (phy_reg & 0xffff); + + return phy_id; +} + +static void +sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt; + + if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { + wolinfo->supported = 0; + wolinfo->wolopts = 0; + return; + } + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = 0; + if (opt & SR_MONITOR_LINK) + wolinfo->wolopts |= WAKE_PHY; + if (opt & SR_MONITOR_MAGIC) + wolinfo->wolopts |= WAKE_MAGIC; +} + +static int +sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt = 0; + + if (wolinfo->wolopts & WAKE_PHY) + opt |= SR_MONITOR_LINK; + if (wolinfo->wolopts & WAKE_MAGIC) + opt |= SR_MONITOR_MAGIC; + + if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE, + opt, 0, 0, NULL) < 0) + return -EINVAL; + + return 0; +} + +static int sr_get_eeprom_len(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + + return data->eeprom_len; +} + +static int sr_get_eeprom(struct net_device *net, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + __le16 *ebuf = (__le16 *)data; + int ret; + int i; + + /* Crude hack to ensure that we don't overwrite memory + * if an odd length is supplied + */ + if (eeprom->len % 2) + return -EINVAL; + + eeprom->magic = SR_EEPROM_MAGIC; + + /* sr9800 returns 2 bytes from eeprom on read */ + for (i = 0; i < eeprom->len / 2; i++) { + ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i, + 0, 2, &ebuf[i]); + if (ret < 0) + return -EINVAL; + } + return 0; +} + +static void sr_get_drvinfo(struct net_device *net, + struct ethtool_drvinfo *info) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); + info->eedump_len = data->eeprom_len; +} + +static u32 sr_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_link_ok(&dev->mii); +} + +static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static int sr_set_mac_address(struct net_device *net, void *p) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + struct sockaddr *addr = p; + + if (netif_running(net)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); + + /* We use the 20 byte dev->data + * for our 6 byte mac buffer + * to avoid allocating memory that + * is tricky to free later + */ + memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); + sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + + return 0; +} + +static const struct ethtool_ops sr9800_ethtool_ops = { + .get_drvinfo = sr_get_drvinfo, + .get_link = sr_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = sr_get_wol, + .set_wol = sr_set_wol, + .get_eeprom_len = sr_get_eeprom_len, + .get_eeprom = sr_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int sr9800_link_reset(struct usbnet *dev) +{ + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + u16 mode; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = SR9800_MEDIUM_DEFAULT; + + if (ethtool_cmd_speed(&ecmd) != SPEED_100) + mode &= ~SR_MEDIUM_PS; + + if (ecmd.duplex != DUPLEX_FULL) + mode &= ~SR_MEDIUM_FD; + + netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n", + __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + sr_write_medium_mode(dev, mode); + + return 0; +} + + +static int sr9800_set_default_mode(struct usbnet *dev) +{ + u16 rx_ctl; + int ret; + + sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA); + mii_nway_restart(&dev->mii); + + ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT); + if (ret < 0) + goto out; + + ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012, + SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT, + SR9800_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); + + rx_ctl = sr_read_medium_status(dev); + netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n", + rx_ctl); + + return 0; +out: + return ret; +} + +static int sr9800_reset(struct usbnet *dev) +{ + struct sr_data *data = (struct sr_data *)&dev->data; + int ret, embd_phy; + u16 rx_ctl; + + ret = sr_write_gpio(dev, + SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5); + if (ret < 0) + goto out; + + embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + + ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + goto out; + } + + ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr_sw_reset(dev, SR_SWRESET_CLEAR); + if (ret < 0) + goto out; + + msleep(150); + + if (embd_phy) { + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) + goto out; + } else { + ret = sr_sw_reset(dev, SR_SWRESET_PRTE); + if (ret < 0) + goto out; + } + + msleep(150); + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = sr_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + ret = sr_sw_reset(dev, SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr9800_set_default_mode(dev); + if (ret < 0) + goto out; + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + return 0; + +out: + return ret; +} + +static const struct net_device_ops sr9800_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = sr_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = sr_ioctl, + .ndo_set_rx_mode = sr_set_multicast, +}; + +static int sr9800_phy_powerup(struct usbnet *dev) +{ + int ret; + + /* set the embedded Ethernet PHY in power-down state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to power down PHY : %d\n", ret); + return ret; + } + msleep(20); + + /* set the embedded Ethernet PHY in power-up state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to reset PHY: %d\n", ret); + return ret; + } + msleep(600); + + /* set the embedded Ethernet PHY in reset state */ + ret = sr_sw_reset(dev, SR_SWRESET_CLEAR); + if (ret < 0) { + netdev_err(dev->net, "Failed to power up PHY: %d\n", ret); + return ret; + } + msleep(20); + + /* set the embedded Ethernet PHY in power-up state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to reset PHY: %d\n", ret); + return ret; + } + + return 0; +} + +static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf) +{ + struct sr_data *data = (struct sr_data *)&dev->data; + u16 led01_mux, led23_mux; + int ret, embd_phy; + u32 phyid; + u16 rx_ctl; + + data->eeprom_len = SR9800_EEPROM_LEN; + + usbnet_get_endpoints(dev, intf); + + /* LED Setting Rule : + * AABB:CCDD + * AA : MFA0(LED0) + * BB : MFA1(LED1) + * CC : MFA2(LED2), Reserved for SR9800 + * DD : MFA3(LED3), Reserved for SR9800 + */ + led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK; + led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE; + ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "set LINK LED failed : %d\n", ret); + goto out; + } + + /* Get the MAC address */ + ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, + dev->net->dev_addr); + if (ret < 0) { + netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); + return ret; + } + netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = sr_mdio_read; + dev->mii.mdio_write = sr_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = sr_get_phy_addr(dev); + + dev->net->netdev_ops = &sr9800_netdev_ops; + dev->net->ethtool_ops = &sr9800_ethtool_ops; + + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + /* Reset the PHY to normal operation mode */ + ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + return ret; + } + + /* Init PHY routine */ + ret = sr9800_phy_powerup(dev); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = sr_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = sr_get_phyid(dev); + netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); + + /* medium mode setting */ + ret = sr9800_set_default_mode(dev); + if (ret < 0) + goto out; + + if (dev->udev->speed == USB_SPEED_HIGH) { + ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold, + 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret); + goto out; + } + dev->rx_urb_size = + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size; + } else { + ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold, + 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret); + goto out; + } + dev->rx_urb_size = + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size; + } + netdev_dbg(dev->net, "%s : setting rx_urb_size with : %ld\n", __func__, + dev->rx_urb_size); + return 0; + +out: + return ret; +} + +static const struct driver_info sr9800_driver_info = { + .description = "CoreChip SR9800 USB 2.0 Ethernet", + .bind = sr9800_bind, + .status = sr_status, + .link_reset = sr9800_link_reset, + .reset = sr9800_reset, + .flags = DRIVER_FLAG, + .rx_fixup = sr_rx_fixup, + .tx_fixup = sr_tx_fixup, +}; + +static const struct usb_device_id products[] = { + { + USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */ + .driver_info = (unsigned long) &sr9800_driver_info, + }, + {}, /* END */ +}; + +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver sr_driver = { + .name = DRIVER_NAME, + .id_table = products, + .probe = usbnet_probe, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disconnect = usbnet_disconnect, + .supports_autosuspend = 1, +}; + +module_usb_driver(sr_driver); + +MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/sr9800.h b/drivers/net/usb/sr9800.h new file mode 100644 index 00000000000..18f67025127 --- /dev/null +++ b/drivers/net/usb/sr9800.h @@ -0,0 +1,202 @@ +/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices + * + * Author : Liu Junliang <liujunliang_ljl@163.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _SR9800_H +#define _SR9800_H + +/* SR9800 spec. command table on Linux Platform */ + +/* command : Software Station Management Control Reg */ +#define SR_CMD_SET_SW_MII 0x06 +/* command : PHY Read Reg */ +#define SR_CMD_READ_MII_REG 0x07 +/* command : PHY Write Reg */ +#define SR_CMD_WRITE_MII_REG 0x08 +/* command : Hardware Station Management Control Reg */ +#define SR_CMD_SET_HW_MII 0x0a +/* command : SROM Read Reg */ +#define SR_CMD_READ_EEPROM 0x0b +/* command : SROM Write Reg */ +#define SR_CMD_WRITE_EEPROM 0x0c +/* command : SROM Write Enable Reg */ +#define SR_CMD_WRITE_ENABLE 0x0d +/* command : SROM Write Disable Reg */ +#define SR_CMD_WRITE_DISABLE 0x0e +/* command : RX Control Read Reg */ +#define SR_CMD_READ_RX_CTL 0x0f +#define SR_RX_CTL_PRO (1 << 0) +#define SR_RX_CTL_AMALL (1 << 1) +#define SR_RX_CTL_SEP (1 << 2) +#define SR_RX_CTL_AB (1 << 3) +#define SR_RX_CTL_AM (1 << 4) +#define SR_RX_CTL_AP (1 << 5) +#define SR_RX_CTL_ARP (1 << 6) +#define SR_RX_CTL_SO (1 << 7) +#define SR_RX_CTL_RH1M (1 << 8) +#define SR_RX_CTL_RH2M (1 << 9) +#define SR_RX_CTL_RH3M (1 << 10) +/* command : RX Control Write Reg */ +#define SR_CMD_WRITE_RX_CTL 0x10 +/* command : IPG0/IPG1/IPG2 Control Read Reg */ +#define SR_CMD_READ_IPG012 0x11 +/* command : IPG0/IPG1/IPG2 Control Write Reg */ +#define SR_CMD_WRITE_IPG012 0x12 +/* command : Node ID Read Reg */ +#define SR_CMD_READ_NODE_ID 0x13 +/* command : Node ID Write Reg */ +#define SR_CMD_WRITE_NODE_ID 0x14 +/* command : Multicast Filter Array Read Reg */ +#define SR_CMD_READ_MULTI_FILTER 0x15 +/* command : Multicast Filter Array Write Reg */ +#define SR_CMD_WRITE_MULTI_FILTER 0x16 +/* command : Eth/HomePNA PHY Address Reg */ +#define SR_CMD_READ_PHY_ID 0x19 +/* command : Medium Status Read Reg */ +#define SR_CMD_READ_MEDIUM_STATUS 0x1a +#define SR_MONITOR_LINK (1 << 1) +#define SR_MONITOR_MAGIC (1 << 2) +#define SR_MONITOR_HSFS (1 << 4) +/* command : Medium Status Write Reg */ +#define SR_CMD_WRITE_MEDIUM_MODE 0x1b +#define SR_MEDIUM_GM (1 << 0) +#define SR_MEDIUM_FD (1 << 1) +#define SR_MEDIUM_AC (1 << 2) +#define SR_MEDIUM_ENCK (1 << 3) +#define SR_MEDIUM_RFC (1 << 4) +#define SR_MEDIUM_TFC (1 << 5) +#define SR_MEDIUM_JFE (1 << 6) +#define SR_MEDIUM_PF (1 << 7) +#define SR_MEDIUM_RE (1 << 8) +#define SR_MEDIUM_PS (1 << 9) +#define SR_MEDIUM_RSV (1 << 10) +#define SR_MEDIUM_SBP (1 << 11) +#define SR_MEDIUM_SM (1 << 12) +/* command : Monitor Mode Status Read Reg */ +#define SR_CMD_READ_MONITOR_MODE 0x1c +/* command : Monitor Mode Status Write Reg */ +#define SR_CMD_WRITE_MONITOR_MODE 0x1d +/* command : GPIO Status Read Reg */ +#define SR_CMD_READ_GPIOS 0x1e +#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */ +#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */ +#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */ +#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */ +#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */ +#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */ +#define SR_GPIO_RESERVED (1 << 6) /* Reserved */ +#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */ +/* command : GPIO Status Write Reg */ +#define SR_CMD_WRITE_GPIOS 0x1f +/* command : Eth PHY Power and Reset Control Reg */ +#define SR_CMD_SW_RESET 0x20 +#define SR_SWRESET_CLEAR 0x00 +#define SR_SWRESET_RR (1 << 0) +#define SR_SWRESET_RT (1 << 1) +#define SR_SWRESET_PRTE (1 << 2) +#define SR_SWRESET_PRL (1 << 3) +#define SR_SWRESET_BZ (1 << 4) +#define SR_SWRESET_IPRL (1 << 5) +#define SR_SWRESET_IPPD (1 << 6) +/* command : Software Interface Selection Status Read Reg */ +#define SR_CMD_SW_PHY_STATUS 0x21 +/* command : Software Interface Selection Status Write Reg */ +#define SR_CMD_SW_PHY_SELECT 0x22 +/* command : BULK in Buffer Size Reg */ +#define SR_CMD_BULKIN_SIZE 0x2A +/* command : LED_MUX Control Reg */ +#define SR_CMD_LED_MUX 0x70 +#define SR_LED_MUX_TX_ACTIVE (1 << 0) +#define SR_LED_MUX_RX_ACTIVE (1 << 1) +#define SR_LED_MUX_COLLISION (1 << 2) +#define SR_LED_MUX_DUP_COL (1 << 3) +#define SR_LED_MUX_DUP (1 << 4) +#define SR_LED_MUX_SPEED (1 << 5) +#define SR_LED_MUX_LINK_ACTIVE (1 << 6) +#define SR_LED_MUX_LINK (1 << 7) + +/* Register Access Flags */ +#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) +#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) + +/* Multicast Filter Array size & Max Number */ +#define SR_MCAST_FILTER_SIZE 8 +#define SR_MAX_MCAST 64 + +/* IPG0/1/2 Default Value */ +#define SR9800_IPG0_DEFAULT 0x15 +#define SR9800_IPG1_DEFAULT 0x0c +#define SR9800_IPG2_DEFAULT 0x12 + +/* Medium Status Default Mode */ +#define SR9800_MEDIUM_DEFAULT \ + (SR_MEDIUM_FD | SR_MEDIUM_RFC | \ + SR_MEDIUM_TFC | SR_MEDIUM_PS | \ + SR_MEDIUM_AC | SR_MEDIUM_RE) + +/* RX Control Default Setting */ +#define SR_DEFAULT_RX_CTL \ + (SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M) + +/* EEPROM Magic Number & EEPROM Size */ +#define SR_EEPROM_MAGIC 0xdeadbeef +#define SR9800_EEPROM_LEN 0xff + +/* SR9800 Driver Version and Driver Name */ +#define DRIVER_VERSION "11-Nov-2013" +#define DRIVER_NAME "CoreChips" +#define DRIVER_FLAG \ + (FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET) + +/* SR9800 BULKIN Buffer Size */ +#define SR9800_MAX_BULKIN_2K 0 +#define SR9800_MAX_BULKIN_4K 1 +#define SR9800_MAX_BULKIN_6K 2 +#define SR9800_MAX_BULKIN_8K 3 +#define SR9800_MAX_BULKIN_16K 4 +#define SR9800_MAX_BULKIN_20K 5 +#define SR9800_MAX_BULKIN_24K 6 +#define SR9800_MAX_BULKIN_32K 7 + +struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = { + /* 2k */ + {2048, 0x8000, 0x8001}, + /* 4k */ + {4096, 0x8100, 0x8147}, + /* 6k */ + {6144, 0x8200, 0x81EB}, + /* 8k */ + {8192, 0x8300, 0x83D7}, + /* 16 */ + {16384, 0x8400, 0x851E}, + /* 20k */ + {20480, 0x8500, 0x8666}, + /* 24k */ + {24576, 0x8600, 0x87AE}, + /* 32k */ + {32768, 0x8700, 0x8A3D}, +}; + +/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ +struct sr_data { + u8 multi_filter[SR_MCAST_FILTER_SIZE]; + u8 mac_addr[ETH_ALEN]; + u8 phymode; + u8 ledmode; + u8 eeprom_len; +}; + +struct sr9800_int_data { + __le16 res1; + u8 link; + __le16 res2; + u8 status; + __le16 res3; +} __packed; + +#endif /* _SR9800_H */ diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 026a313c2d2..b0f705c2378 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -469,7 +469,6 @@ static inline struct hlist_head *vxlan_fdb_head(struct vxlan_dev *vxlan, /* Look up Ethernet address in forwarding table */ static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan, const u8 *mac) - { struct hlist_head *head = vxlan_fdb_head(vxlan, mac); struct vxlan_fdb *f; @@ -596,10 +595,8 @@ static struct sk_buff **vxlan_gro_receive(struct sk_buff **head, struct sk_buff NAPI_GRO_CB(p)->same_flow = 0; continue; } - goto found; } -found: type = eh->h_proto; rcu_read_lock(); diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 0d1c7592efa..19f7cb2cdef 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -71,12 +71,9 @@ static int dlci_header(struct sk_buff *skb, struct net_device *dev, const void *saddr, unsigned len) { struct frhdr hdr; - struct dlci_local *dlp; unsigned int hlen; char *dest; - dlp = netdev_priv(dev); - hdr.control = FRAD_I_UI; switch (type) { @@ -107,11 +104,9 @@ static int dlci_header(struct sk_buff *skb, struct net_device *dev, static void dlci_receive(struct sk_buff *skb, struct net_device *dev) { - struct dlci_local *dlp; struct frhdr *hdr; int process, header; - dlp = netdev_priv(dev); if (!pskb_may_pull(skb, sizeof(*hdr))) { netdev_notice(dev, "invalid data no header\n"); dev->stats.rx_errors++; diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c index 8aa20df55e5..507d9a9ee69 100644 --- a/drivers/net/wireless/ath/ar5523/ar5523.c +++ b/drivers/net/wireless/ath/ar5523/ar5523.c @@ -1764,7 +1764,7 @@ static struct usb_device_id ar5523_id_table[] = { AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */ AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ - AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108 + AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108 (CyberTAN Technology) */ AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */ AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 25243cbc07f..b8daff78b9d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -5065,6 +5065,10 @@ static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep, break; } } + + if (is2GHz && !twiceMaxEdgePower) + twiceMaxEdgePower = 60; + return twiceMaxEdgePower; } diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 58da3468d1f..99a203174f4 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -262,6 +262,8 @@ enum tid_aggr_state { struct ath9k_htc_sta { u8 index; enum tid_aggr_state tid_state[ATH9K_HTC_MAX_TID]; + struct work_struct rc_update_work; + struct ath9k_htc_priv *htc_priv; }; #define ATH9K_HTC_RXBUF 256 diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index f4e1de20d99..c57d6b859c0 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -34,6 +34,10 @@ static int ath9k_htc_btcoex_enable; module_param_named(btcoex_enable, ath9k_htc_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); +static int ath9k_ps_enable; +module_param_named(ps_enable, ath9k_ps_enable, int, 0444); +MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); + #define CHAN2G(_freq, _idx) { \ .center_freq = (_freq), \ .hw_value = (_idx), \ @@ -725,12 +729,14 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv, IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_HAS_RATE_CONTROL | IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + if (ath9k_ps_enable) + hw->flags |= IEEE80211_HW_SUPPORTS_PS; + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 608d739d137..c9254a61ca5 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1270,18 +1270,50 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw, mutex_unlock(&priv->mutex); } +static void ath9k_htc_sta_rc_update_work(struct work_struct *work) +{ + struct ath9k_htc_sta *ista = + container_of(work, struct ath9k_htc_sta, rc_update_work); + struct ieee80211_sta *sta = + container_of((void *)ista, struct ieee80211_sta, drv_priv); + struct ath9k_htc_priv *priv = ista->htc_priv; + struct ath_common *common = ath9k_hw_common(priv->ah); + struct ath9k_htc_target_rate trate; + + mutex_lock(&priv->mutex); + ath9k_htc_ps_wakeup(priv); + + memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); + ath9k_htc_setup_rate(priv, sta, &trate); + if (!ath9k_htc_send_rate_cmd(priv, &trate)) + ath_dbg(common, CONFIG, + "Supported rates for sta: %pM updated, rate caps: 0x%X\n", + sta->addr, be32_to_cpu(trate.capflags)); + else + ath_dbg(common, CONFIG, + "Unable to update supported rates for sta: %pM\n", + sta->addr); + + ath9k_htc_ps_restore(priv); + mutex_unlock(&priv->mutex); +} + static int ath9k_htc_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta) { struct ath9k_htc_priv *priv = hw->priv; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; int ret; mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); ret = ath9k_htc_add_station(priv, vif, sta); - if (!ret) + if (!ret) { + INIT_WORK(&ista->rc_update_work, ath9k_htc_sta_rc_update_work); + ista->htc_priv = priv; ath9k_htc_init_rate(priv, sta); + } ath9k_htc_ps_restore(priv); mutex_unlock(&priv->mutex); @@ -1293,12 +1325,13 @@ static int ath9k_htc_sta_remove(struct ieee80211_hw *hw, struct ieee80211_sta *sta) { struct ath9k_htc_priv *priv = hw->priv; - struct ath9k_htc_sta *ista; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; int ret; + cancel_work_sync(&ista->rc_update_work); + mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); - ista = (struct ath9k_htc_sta *) sta->drv_priv; htc_sta_drain(priv->htc, ista->index); ret = ath9k_htc_remove_station(priv, vif, sta); ath9k_htc_ps_restore(priv); @@ -1311,28 +1344,12 @@ static void ath9k_htc_sta_rc_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u32 changed) { - struct ath9k_htc_priv *priv = hw->priv; - struct ath_common *common = ath9k_hw_common(priv->ah); - struct ath9k_htc_target_rate trate; - - mutex_lock(&priv->mutex); - ath9k_htc_ps_wakeup(priv); + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; - if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) { - memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); - ath9k_htc_setup_rate(priv, sta, &trate); - if (!ath9k_htc_send_rate_cmd(priv, &trate)) - ath_dbg(common, CONFIG, - "Supported rates for sta: %pM updated, rate caps: 0x%X\n", - sta->addr, be32_to_cpu(trate.capflags)); - else - ath_dbg(common, CONFIG, - "Unable to update supported rates for sta: %pM\n", - sta->addr); - } + if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED)) + return; - ath9k_htc_ps_restore(priv); - mutex_unlock(&priv->mutex); + schedule_work(&ista->rc_update_work); } static int ath9k_htc_conf_tx(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index fbf43c05713..11eab9f01fd 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1316,7 +1316,7 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) if (AR_SREV_9300_20_OR_LATER(ah)) udelay(50); else if (AR_SREV_9100(ah)) - udelay(10000); + mdelay(10); else udelay(100); @@ -2051,9 +2051,8 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah) REG_SET_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9100(ah)) - udelay(10000); + mdelay(10); else udelay(50); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c36de303c8f..1fc2e5a26b5 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -57,6 +57,10 @@ static int ath9k_bt_ant_diversity; module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444); MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity"); +static int ath9k_ps_enable; +module_param_named(ps_enable, ath9k_ps_enable, int, 0444); +MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); + bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -903,13 +907,15 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_RC_TABLE | IEEE80211_HW_SUPPORTS_HT_CCK_RATES; + if (ath9k_ps_enable) + hw->flags |= IEEE80211_HW_SUPPORTS_PS; + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index f06f4cbe131..725e954d847 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -182,6 +182,11 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) { ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx); + + if (ch_idx >= NUM_2GHZ_CHANNELS && + !data->sku_cap_band_52GHz_enable) + ch_flags &= ~NVM_CHANNEL_VALID; + if (!(ch_flags & NVM_CHANNEL_VALID)) { IWL_DEBUG_EEPROM(dev, "Ch. %d Flags %x [%sGHz] - No traffic\n", diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 73cbba7424f..9426905de6b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -504,6 +504,7 @@ struct iwl_scan_offload_profile { * @match_notify: clients waiting for match found notification * @pass_match: clients waiting for the results * @active_clients: active clients bitmap - enum scan_framework_client + * @any_beacon_notify: clients waiting for match notification without match */ struct iwl_scan_offload_profile_cfg { struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES]; @@ -512,7 +513,8 @@ struct iwl_scan_offload_profile_cfg { u8 match_notify; u8 pass_match; u8 active_clients; - u8 reserved[3]; + u8 any_beacon_notify; + u8 reserved[2]; } __packed; /** diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index c49b5073c25..6bf9766e598 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -246,7 +246,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) else hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) { + if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) { hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX; hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 0e000796061..742afc429c9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -344,7 +344,8 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, iwl_mvm_scan_fill_ssids(cmd, req, basic_ssid ? 1 : 0); - cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL); + cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | + TX_CMD_FLG_BT_DIS); cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); cmd->tx_cmd.rate_n_flags = @@ -807,6 +808,8 @@ int iwl_mvm_config_sched_scan_profiles(struct iwl_mvm *mvm, profile_cfg->active_clients = SCAN_CLIENT_SCHED_SCAN; profile_cfg->pass_match = SCAN_CLIENT_SCHED_SCAN; profile_cfg->match_notify = SCAN_CLIENT_SCHED_SCAN; + if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len) + profile_cfg->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN; for (i = 0; i < req->n_match_sets; i++) { profile = &profile_cfg->profiles[i]; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index ec181213323..3397f59cd4e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -652,7 +652,7 @@ int iwl_mvm_send_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); static const u8 _baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; - static const u8 *baddr = _baddr; + const u8 *baddr = _baddr; lockdep_assert_held(&mvm->mutex); diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 90378c217bc..4df12fa9d33 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -659,8 +659,14 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, rcu_read_lock(); sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + /* + * sta can't be NULL otherwise it'd mean that the sta has been freed in + * the firmware while we still have packets for it in the Tx queues. + */ + if (WARN_ON_ONCE(!sta)) + goto out; - if (!IS_ERR_OR_NULL(sta)) { + if (!IS_ERR(sta)) { mvmsta = iwl_mvm_sta_from_mac80211(sta); if (tid != IWL_TID_NON_QOS) { @@ -675,7 +681,6 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, spin_unlock_bh(&mvmsta->lock); } } else { - sta = NULL; mvmsta = NULL; } @@ -683,42 +688,38 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... */ - if (txq_id < mvm->first_agg_queue && !WARN_ON(skb_freed > 1) && - atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) { - if (mvmsta) { - /* - * If there are no pending frames for this STA, notify - * mac80211 that this station can go to sleep in its - * STA table. - */ - if (mvmsta->vif->type == NL80211_IFTYPE_AP) - ieee80211_sta_block_awake(mvm->hw, sta, false); - /* - * We might very well have taken mvmsta pointer while - * the station was being removed. The remove flow might - * have seen a pending_frame (because we didn't take - * the lock) even if now the queues are drained. So make - * really sure now that this the station is not being - * removed. If it is, run the drain worker to remove it. - */ - spin_lock_bh(&mvmsta->lock); - sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); - if (!sta || PTR_ERR(sta) == -EBUSY) { - /* - * Station disappeared in the meantime: - * so we are draining. - */ - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); - } - spin_unlock_bh(&mvmsta->lock); - } else if (!mvmsta && PTR_ERR(sta) == -EBUSY) { - /* Tx response without STA, so we are draining */ - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); - } + if (txq_id >= mvm->first_agg_queue) + goto out; + + /* We can't free more than one frame at once on a shared queue */ + WARN_ON(skb_freed > 1); + + /* If we have still frames from this STA nothing to do here */ + if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) + goto out; + + if (mvmsta && mvmsta->vif->type == NL80211_IFTYPE_AP) { + /* + * If there are no pending frames for this STA, notify + * mac80211 that this station can go to sleep in its + * STA table. + * If mvmsta is not NULL, sta is valid. + */ + ieee80211_sta_block_awake(mvm->hw, sta, false); + } + + if (PTR_ERR(sta) == -EBUSY || PTR_ERR(sta) == -ENOENT) { + /* + * We are draining and this was the last packet - pre_rcu_remove + * has been called already. We might be after the + * synchronize_net already. + * Don't rely on iwl_mvm_rm_sta to see the empty Tx queues. + */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); } +out: rcu_read_unlock(); } diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index a4a5e25623c..86989df6935 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -411,6 +411,8 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm) mvm->status, table.valid); } + IWL_ERR(mvm, "Loaded firmware version: %s\n", mvm->fw->fw_version); + trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low, table.data1, table.data2, table.data3, table.blink1, table.blink2, table.ilink1, diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 3040924f5f3..f47bcbe2945 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -359,20 +359,25 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5112, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5100, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x510A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5310, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5302, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5210, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)}, - {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)}, diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index abc5f56f29f..2f1cd929c6f 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1877,6 +1877,11 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 9f16824cd1b..d849d590de2 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1706,6 +1706,11 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; + /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b8f5b06006c..7f8b5d156c8 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -7458,10 +7458,9 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) u32 reg; /* - * Disable powersaving as default on PCI devices. + * Disable powersaving as default. */ - if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; /* * Initialize all hw fields. diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 8ec17aad0e5..3867d1470b3 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -107,6 +107,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) struct rtl8180_priv *priv = dev->priv; unsigned int count = 32; u8 signal, agc, sq; + dma_addr_t mapping; while (count--) { struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; @@ -128,6 +129,17 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) if (unlikely(!new_skb)) goto done; + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(new_skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + + if (pci_dma_mapping_error(priv->pdev, mapping)) { + kfree_skb(new_skb); + dev_err(&priv->pdev->dev, "RX DMA map error\n"); + + goto done; + } + pci_unmap_single(priv->pdev, *((dma_addr_t *)skb->cb), MAX_RX_SIZE, PCI_DMA_FROMDEVICE); @@ -158,9 +170,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) skb = new_skb; priv->rx_buf[priv->rx_idx] = skb; - *((dma_addr_t *) skb->cb) = - pci_map_single(priv->pdev, skb_tail_pointer(skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + *((dma_addr_t *) skb->cb) = mapping; } done: @@ -266,6 +276,13 @@ static void rtl8180_tx(struct ieee80211_hw *dev, mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) { + kfree_skb(skb); + dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); + return; + + } + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | RTL818X_TX_DESC_FLAG_LS | (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 4c76bcb9a87..ae413a2cbee 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -143,11 +143,7 @@ struct xenvif { char rx_irq_name[IFNAMSIZ+4]; /* DEVNAME-rx */ struct xen_netif_rx_back_ring rx; struct sk_buff_head rx_queue; - bool rx_queue_stopped; - /* Set when the RX interrupt is triggered by the frontend. - * The worker thread may need to wake the queue. - */ - bool rx_event; + RING_IDX rx_last_skb_slots; /* This array is allocated seperately as it is large */ struct gnttab_copy *grant_copy_op; diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index b9de31ea7fc..7669d49a67e 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -100,7 +100,6 @@ static irqreturn_t xenvif_rx_interrupt(int irq, void *dev_id) { struct xenvif *vif = dev_id; - vif->rx_event = true; xenvif_kick_thread(vif); return IRQ_HANDLED; diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 6b62c3eb8e1..e5284bca2d9 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -476,7 +476,6 @@ static void xenvif_rx_action(struct xenvif *vif) unsigned long offset; struct skb_cb_overlay *sco; bool need_to_notify = false; - bool ring_full = false; struct netrx_pending_operations npo = { .copy = vif->grant_copy_op, @@ -486,7 +485,7 @@ static void xenvif_rx_action(struct xenvif *vif) skb_queue_head_init(&rxq); while ((skb = skb_dequeue(&vif->rx_queue)) != NULL) { - int max_slots_needed; + RING_IDX max_slots_needed; int i; /* We need a cheap worse case estimate for the number of @@ -509,9 +508,10 @@ static void xenvif_rx_action(struct xenvif *vif) if (!xenvif_rx_ring_slots_available(vif, max_slots_needed)) { skb_queue_head(&vif->rx_queue, skb); need_to_notify = true; - ring_full = true; + vif->rx_last_skb_slots = max_slots_needed; break; - } + } else + vif->rx_last_skb_slots = 0; sco = (struct skb_cb_overlay *)skb->cb; sco->meta_slots_used = xenvif_gop_skb(skb, &npo); @@ -522,8 +522,6 @@ static void xenvif_rx_action(struct xenvif *vif) BUG_ON(npo.meta_prod > ARRAY_SIZE(vif->meta)); - vif->rx_queue_stopped = !npo.copy_prod && ring_full; - if (!npo.copy_prod) goto done; @@ -1473,8 +1471,8 @@ static struct xen_netif_rx_response *make_rx_response(struct xenvif *vif, static inline int rx_work_todo(struct xenvif *vif) { - return (!skb_queue_empty(&vif->rx_queue) && !vif->rx_queue_stopped) || - vif->rx_event; + return !skb_queue_empty(&vif->rx_queue) && + xenvif_rx_ring_slots_available(vif, vif->rx_last_skb_slots); } static inline int tx_work_todo(struct xenvif *vif) @@ -1560,8 +1558,6 @@ int xenvif_kthread(void *data) if (!skb_queue_empty(&vif->rx_queue)) xenvif_rx_action(vif); - vif->rx_event = false; - if (skb_queue_empty(&vif->rx_queue) && netif_queue_stopped(vif->dev)) xenvif_start_queue(vif); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index ff04d4f95ba..f9daa9e183f 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1832,7 +1832,6 @@ static void netback_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -1847,6 +1846,10 @@ static void netback_changed(struct xenbus_device *dev, netdev_notify_peers(netdev); break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; |