diff options
Diffstat (limited to 'drivers/of')
| -rw-r--r-- | drivers/of/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/of/Makefile | 1 | ||||
| -rw-r--r-- | drivers/of/address.c | 20 | ||||
| -rw-r--r-- | drivers/of/base.c | 66 | ||||
| -rw-r--r-- | drivers/of/gpio.c | 16 | ||||
| -rw-r--r-- | drivers/of/of_net.c | 45 | ||||
| -rw-r--r-- | drivers/of/of_pci.c | 113 | ||||
| -rw-r--r-- | drivers/of/of_pci_irq.c | 92 | ||||
| -rw-r--r-- | drivers/of/platform.c | 200 |
9 files changed, 459 insertions, 102 deletions
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index d06a6374ed6..cac63c9f49a 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -71,8 +71,14 @@ config OF_MDIO config OF_PCI def_tristate PCI - depends on PCI && (PPC || MICROBLAZE || X86) + depends on PCI help OpenFirmware PCI bus accessors +config OF_PCI_IRQ + def_tristate PCI + depends on OF_PCI && OF_IRQ + help + OpenFirmware PCI IRQ routing helpers + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index f7861ed2f28..dccb1176be5 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_SPI) += of_spi.o obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o +obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o diff --git a/drivers/of/address.c b/drivers/of/address.c index b4559c58c09..72c33fbe451 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -577,6 +577,24 @@ int of_address_to_resource(struct device_node *dev, int index, } EXPORT_SYMBOL_GPL(of_address_to_resource); +struct device_node *of_find_matching_node_by_address(struct device_node *from, + const struct of_device_id *matches, + u64 base_address) +{ + struct device_node *dn = of_find_matching_node(from, matches); + struct resource res; + + while (dn) { + if (of_address_to_resource(dn, 0, &res)) + continue; + if (res.start == base_address) + return dn; + dn = of_find_matching_node(dn, matches); + } + + return NULL; +} + /** * of_iomap - Maps the memory mapped IO for a given device_node @@ -592,6 +610,6 @@ void __iomem *of_iomap(struct device_node *np, int index) if (of_address_to_resource(np, index, &res)) return NULL; - return ioremap(res.start, 1 + res.end - res.start); + return ioremap(res.start, resource_size(&res)); } EXPORT_SYMBOL(of_iomap); diff --git a/drivers/of/base.c b/drivers/of/base.c index 632ebae7f17..3ff22e32b60 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -596,6 +596,72 @@ struct device_node *of_find_node_by_phandle(phandle handle) EXPORT_SYMBOL(of_find_node_by_phandle); /** + * of_property_read_u32_array - Find and read an array of 32 bit integers + * from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_value: pointer to return value, modified only if return value is 0. + * + * Search for a property in a device node and read 32-bit value(s) from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_value is modified only if a valid u32 value can be decoded. + */ +int of_property_read_u32_array(const struct device_node *np, + const char *propname, u32 *out_values, + size_t sz) +{ + struct property *prop = of_find_property(np, propname, NULL); + const __be32 *val; + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + if ((sz * sizeof(*out_values)) > prop->length) + return -EOVERFLOW; + + val = prop->value; + while (sz--) + *out_values++ = be32_to_cpup(val++); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u32_array); + +/** + * of_property_read_string - Find and read a string from a property + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_string: pointer to null terminated return string, modified only if + * return value is 0. + * + * Search for a property in a device tree node and retrieve a null + * terminated string value (pointer to data, not a copy). Returns 0 on + * success, -EINVAL if the property does not exist, -ENODATA if property + * does not have a value, and -EILSEQ if the string is not null-terminated + * within the length of the property data. + * + * The out_string pointer is modified only if a valid string can be decoded. + */ +int of_property_read_string(struct device_node *np, const char *propname, + const char **out_string) +{ + struct property *prop = of_find_property(np, propname, NULL); + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + if (strnlen(prop->value, prop->length) >= prop->length) + return -EILSEQ; + *out_string = prop->value; + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_string); + +/** * of_parse_phandle - Resolve a phandle property to a device_node pointer * @np: Pointer to device node holding phandle property * @phandle_name: Name of property holding a phandle value diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index 905960338fb..ef0105fa52b 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -21,8 +21,9 @@ #include <linux/slab.h> /** - * of_get_gpio_flags - Get a GPIO number and flags to use with GPIO API + * of_get_named_gpio_flags() - Get a GPIO number and flags to use with GPIO API * @np: device node to get GPIO from + * @propname: property name containing gpio specifier(s) * @index: index of the GPIO * @flags: a flags pointer to fill in * @@ -30,8 +31,8 @@ * value on the error condition. If @flags is not NULL the function also fills * in flags for the GPIO. */ -int of_get_gpio_flags(struct device_node *np, int index, - enum of_gpio_flags *flags) +int of_get_named_gpio_flags(struct device_node *np, const char *propname, + int index, enum of_gpio_flags *flags) { int ret; struct device_node *gpio_np; @@ -40,7 +41,7 @@ int of_get_gpio_flags(struct device_node *np, int index, const void *gpio_spec; const __be32 *gpio_cells; - ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index, + ret = of_parse_phandles_with_args(np, propname, "#gpio-cells", index, &gpio_np, &gpio_spec); if (ret) { pr_debug("%s: can't parse gpios property\n", __func__); @@ -79,7 +80,7 @@ err0: pr_debug("%s exited with status %d\n", __func__, ret); return ret; } -EXPORT_SYMBOL(of_get_gpio_flags); +EXPORT_SYMBOL(of_get_named_gpio_flags); /** * of_gpio_count - Count GPIOs for a device @@ -126,8 +127,8 @@ EXPORT_SYMBOL(of_gpio_count); * gpio chips. This function performs only one sanity check: whether gpio * is less than ngpios (that is specified in the gpio_chip). */ -static int of_gpio_simple_xlate(struct gpio_chip *gc, struct device_node *np, - const void *gpio_spec, u32 *flags) +int of_gpio_simple_xlate(struct gpio_chip *gc, struct device_node *np, + const void *gpio_spec, u32 *flags) { const __be32 *gpio = gpio_spec; const u32 n = be32_to_cpup(gpio); @@ -151,6 +152,7 @@ static int of_gpio_simple_xlate(struct gpio_chip *gc, struct device_node *np, return n; } +EXPORT_SYMBOL(of_gpio_simple_xlate); /** * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank) diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c index 86f334a2769..bb184717588 100644 --- a/drivers/of/of_net.c +++ b/drivers/of/of_net.c @@ -8,6 +8,51 @@ #include <linux/etherdevice.h> #include <linux/kernel.h> #include <linux/of_net.h> +#include <linux/phy.h> + +/** + * It maps 'enum phy_interface_t' found in include/linux/phy.h + * into the device tree binding of 'phy-mode', so that Ethernet + * device driver can get phy interface from device tree. + */ +static const char *phy_modes[] = { + [PHY_INTERFACE_MODE_NA] = "", + [PHY_INTERFACE_MODE_MII] = "mii", + [PHY_INTERFACE_MODE_GMII] = "gmii", + [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_TBI] = "tbi", + [PHY_INTERFACE_MODE_RMII] = "rmii", + [PHY_INTERFACE_MODE_RGMII] = "rgmii", + [PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id", + [PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid", + [PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid", + [PHY_INTERFACE_MODE_RTBI] = "rtbi", + [PHY_INTERFACE_MODE_SMII] = "smii", +}; + +/** + * of_get_phy_mode - Get phy mode for given device_node + * @np: Pointer to the given device_node + * + * The function gets phy interface string from property 'phy-mode', + * and return its index in phy_modes table, or errno in error case. + */ +const int of_get_phy_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "phy-mode", &pm); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(phy_modes); i++) + if (!strcasecmp(pm, phy_modes[i])) + return i; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(of_get_phy_mode); /** * Search the device tree for the best MAC address to use. 'mac-address' is diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c index ac1ec54e4fd..3701b62c1d5 100644 --- a/drivers/of/of_pci.c +++ b/drivers/of/of_pci.c @@ -1,92 +1,41 @@ #include <linux/kernel.h> +#include <linux/of.h> #include <linux/of_pci.h> -#include <linux/of_irq.h> #include <asm/prom.h> -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +static inline int __of_pci_pci_compare(struct device_node *node, + unsigned int devfn) { - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - __be32 lspec_be; - __be32 laddr[3]; - u8 pin; - int rc; + unsigned int size; + const __be32 *reg = of_get_property(node, "reg", &size); - /* Check if we have a device node, if yes, fallback to standard - * device tree parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { - rc = of_irq_map_one(dn, 0, out_irq); - if (!rc) - return rc; - } - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - ppnode = pci_bus_to_OF_node(pdev->bus); - - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else { - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - } - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; + if (!reg || size < 5 * sizeof(__be32)) + return 0; + return ((be32_to_cpup(®[0]) >> 8) & 0xff) == devfn; +} - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again +struct device_node *of_pci_find_child_device(struct device_node *parent, + unsigned int devfn) +{ + struct device_node *node, *node2; + + for_each_child_of_node(parent, node) { + if (__of_pci_pci_compare(node, devfn)) + return node; + /* + * Some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function + * device we go down them as well. */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; + if (!strcmp(node->name, "multifunc-device")) { + for_each_child_of_node(node, node2) { + if (__of_pci_pci_compare(node2, devfn)) { + of_node_put(node); + return node2; + } + } + } } - - lspec_be = cpu_to_be32(lspec); - laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); - laddr[1] = laddr[2] = cpu_to_be32(0); - return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); + return NULL; } -EXPORT_SYMBOL_GPL(of_irq_map_pci); +EXPORT_SYMBOL_GPL(of_pci_find_child_device); diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c new file mode 100644 index 00000000000..ac1ec54e4fd --- /dev/null +++ b/drivers/of/of_pci_irq.c @@ -0,0 +1,92 @@ +#include <linux/kernel.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <asm/prom.h> + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + __be32 lspec_be; + __be32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = pci_swizzle_interrupt_pin(pdev, lspec); + pdev = ppdev; + } + + lspec_be = cpu_to_be32(lspec); + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 63d3cb73bdb..ed5a6d3c26a 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -13,6 +13,7 @@ */ #include <linux/errno.h> #include <linux/module.h> +#include <linux/amba/bus.h> #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/slab.h> @@ -22,6 +23,14 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> +const struct of_device_id of_default_bus_match_table[] = { + { .compatible = "simple-bus", }, +#ifdef CONFIG_ARM_AMBA + { .compatible = "arm,amba-bus", }, +#endif /* CONFIG_ARM_AMBA */ + {} /* Empty terminated list */ +}; + static int of_dev_node_match(struct device *dev, void *data) { return dev->of_node == data; @@ -153,7 +162,7 @@ struct platform_device *of_device_alloc(struct device_node *np, } dev->dev.of_node = of_node_get(np); -#if defined(CONFIG_PPC) || defined(CONFIG_MICROBLAZE) +#if defined(CONFIG_MICROBLAZE) dev->dev.dma_mask = &dev->archdata.dma_mask; #endif dev->dev.parent = parent; @@ -168,17 +177,20 @@ struct platform_device *of_device_alloc(struct device_node *np, EXPORT_SYMBOL(of_device_alloc); /** - * of_platform_device_create - Alloc, initialize and register an of_device + * of_platform_device_create_pdata - Alloc, initialize and register an of_device * @np: pointer to node to create device for * @bus_id: name to assign device + * @platform_data: pointer to populate platform_data pointer with * @parent: Linux device model parent device. * * Returns pointer to created platform device, or NULL if a device was not * registered. Unavailable devices will not get registered. */ -struct platform_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent) +struct platform_device *of_platform_device_create_pdata( + struct device_node *np, + const char *bus_id, + void *platform_data, + struct device *parent) { struct platform_device *dev; @@ -189,11 +201,12 @@ struct platform_device *of_platform_device_create(struct device_node *np, if (!dev) return NULL; -#if defined(CONFIG_PPC) || defined(CONFIG_MICROBLAZE) +#if defined(CONFIG_MICROBLAZE) dev->archdata.dma_mask = 0xffffffffUL; #endif dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->dev.bus = &platform_bus_type; + dev->dev.platform_data = platform_data; /* We do not fill the DMA ops for platform devices by default. * This is currently the responsibility of the platform code @@ -207,8 +220,111 @@ struct platform_device *of_platform_device_create(struct device_node *np, return dev; } + +/** + * of_platform_device_create - Alloc, initialize and register an of_device + * @np: pointer to node to create device for + * @bus_id: name to assign device + * @parent: Linux device model parent device. + * + * Returns pointer to created platform device, or NULL if a device was not + * registered. Unavailable devices will not get registered. + */ +struct platform_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + return of_platform_device_create_pdata(np, bus_id, NULL, parent); +} EXPORT_SYMBOL(of_platform_device_create); +#ifdef CONFIG_ARM_AMBA +static struct amba_device *of_amba_device_create(struct device_node *node, + const char *bus_id, + void *platform_data, + struct device *parent) +{ + struct amba_device *dev; + const void *prop; + int i, ret; + + pr_debug("Creating amba device %s\n", node->full_name); + + if (!of_device_is_available(node)) + return NULL; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + /* setup generic device info */ + dev->dev.coherent_dma_mask = ~0; + dev->dev.of_node = of_node_get(node); + dev->dev.parent = parent; + dev->dev.platform_data = platform_data; + if (bus_id) + dev_set_name(&dev->dev, "%s", bus_id); + else + of_device_make_bus_id(&dev->dev); + + /* setup amba-specific device info */ + dev->dma_mask = ~0; + + /* Allow the HW Peripheral ID to be overridden */ + prop = of_get_property(node, "arm,primecell-periphid", NULL); + if (prop) + dev->periphid = of_read_ulong(prop, 1); + + /* Decode the IRQs and address ranges */ + for (i = 0; i < AMBA_NR_IRQS; i++) + dev->irq[i] = irq_of_parse_and_map(node, i); + + ret = of_address_to_resource(node, 0, &dev->res); + if (ret) + goto err_free; + + ret = amba_device_register(dev, &iomem_resource); + if (ret) + goto err_free; + + return dev; + +err_free: + kfree(dev); + return NULL; +} +#else /* CONFIG_ARM_AMBA */ +static struct amba_device *of_amba_device_create(struct device_node *node, + const char *bus_id, + void *platform_data, + struct device *parent) +{ + return NULL; +} +#endif /* CONFIG_ARM_AMBA */ + +/** + * of_devname_lookup() - Given a device node, lookup the preferred Linux name + */ +static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup, + struct device_node *np) +{ + struct resource res; + if (lookup) { + for(; lookup->name != NULL; lookup++) { + if (!of_device_is_compatible(np, lookup->compatible)) + continue; + if (of_address_to_resource(np, 0, &res)) + continue; + if (res.start != lookup->phys_addr) + continue; + pr_debug("%s: devname=%s\n", np->full_name, lookup->name); + return lookup; + } + } + return NULL; +} + /** * of_platform_bus_create() - Create a device for a node and its children. * @bus: device node of the bus to instantiate @@ -221,19 +337,41 @@ EXPORT_SYMBOL(of_platform_device_create); */ static int of_platform_bus_create(struct device_node *bus, const struct of_device_id *matches, - struct device *parent) + const struct of_dev_auxdata *lookup, + struct device *parent, bool strict) { + const struct of_dev_auxdata *auxdata; struct device_node *child; struct platform_device *dev; + const char *bus_id = NULL; + void *platform_data = NULL; int rc = 0; - dev = of_platform_device_create(bus, NULL, parent); + /* Make sure it has a compatible property */ + if (strict && (!of_get_property(bus, "compatible", NULL))) { + pr_debug("%s() - skipping %s, no compatible prop\n", + __func__, bus->full_name); + return 0; + } + + auxdata = of_dev_lookup(lookup, bus); + if (auxdata) { + bus_id = auxdata->name; + platform_data = auxdata->platform_data; + } + + if (of_device_is_compatible(bus, "arm,primecell")) { + of_amba_device_create(bus, bus_id, platform_data, parent); + return 0; + } + + dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent); if (!dev || !of_match_node(matches, bus)) return 0; for_each_child_of_node(bus, child) { pr_debug(" create child: %s\n", child->full_name); - rc = of_platform_bus_create(child, matches, &dev->dev); + rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict); if (rc) { of_node_put(child); break; @@ -267,11 +405,11 @@ int of_platform_bus_probe(struct device_node *root, /* Do a self check of bus type, if there's a match, create children */ if (of_match_node(matches, root)) { - rc = of_platform_bus_create(root, matches, parent); + rc = of_platform_bus_create(root, matches, NULL, parent, false); } else for_each_child_of_node(root, child) { if (!of_match_node(matches, child)) continue; - rc = of_platform_bus_create(child, matches, parent); + rc = of_platform_bus_create(child, matches, NULL, parent, false); if (rc) break; } @@ -280,4 +418,44 @@ int of_platform_bus_probe(struct device_node *root, return rc; } EXPORT_SYMBOL(of_platform_bus_probe); + +/** + * of_platform_populate() - Populate platform_devices from device tree data + * @root: parent of the first level to probe or NULL for the root of the tree + * @matches: match table, NULL to use the default + * @parent: parent to hook devices from, NULL for toplevel + * + * Similar to of_platform_bus_probe(), this function walks the device tree + * and creates devices from nodes. It differs in that it follows the modern + * convention of requiring all device nodes to have a 'compatible' property, + * and it is suitable for creating devices which are children of the root + * node (of_platform_bus_probe will only create children of the root which + * are selected by the @matches argument). + * + * New board support should be using this function instead of + * of_platform_bus_probe(). + * + * Returns 0 on success, < 0 on failure. + */ +int of_platform_populate(struct device_node *root, + const struct of_device_id *matches, + const struct of_dev_auxdata *lookup, + struct device *parent) +{ + struct device_node *child; + int rc = 0; + + root = root ? of_node_get(root) : of_find_node_by_path("/"); + if (!root) + return -EINVAL; + + for_each_child_of_node(root, child) { + rc = of_platform_bus_create(child, matches, lookup, parent, true); + if (rc) + break; + } + + of_node_put(root); + return rc; +} #endif /* !CONFIG_SPARC */ |