diff options
Diffstat (limited to 'drivers/parisc/lba_pci.c')
| -rw-r--r-- | drivers/parisc/lba_pci.c | 34 |
1 files changed, 20 insertions, 14 deletions
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index ba6769934c7..eae0812f01a 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -980,7 +980,7 @@ LBA_PORT_IN(32, 0) #define LBA_PORT_OUT(size, mask) \ static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \ { \ - void *where = (void *) PIOP_TO_GMMIO(LBA_DEV(l), addr); \ + void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \ DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __FUNCTION__, l, addr, val); \ WRITE_REG##size(val, where); \ /* flush the I/O down to the elroy at least */ \ @@ -1406,13 +1406,20 @@ lba_hw_init(struct lba_device *d) return 0; } - +/* + * Unfortunately, when firmware numbers busses, it doesn't take into account + * Cardbus bridges. So we have to renumber the busses to suit ourselves. + * Elroy/Mercury don't actually know what bus number they're attached to; + * we use bus 0 to indicate the directly attached bus and any other bus + * number will be taken care of by the PCI-PCI bridge. + */ +static unsigned int lba_next_bus = 0; /* -** Determine if lba should claim this chip (return 0) or not (return 1). -** If so, initialize the chip and tell other partners in crime they -** have work to do. -*/ + * Determine if lba should claim this chip (return 0) or not (return 1). + * If so, initialize the chip and tell other partners in crime they + * have work to do. + */ static int __init lba_driver_probe(struct parisc_device *dev) { @@ -1478,9 +1485,7 @@ lba_driver_probe(struct parisc_device *dev) return -ENODEV; } - /* - ** Tell I/O SAPIC driver we have a IRQ handler/region. - */ + /* Tell I/O SAPIC driver we have a IRQ handler/region. */ tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't @@ -1529,16 +1534,17 @@ lba_driver_probe(struct parisc_device *dev) lba_legacy_resources(dev, lba_dev); } - /* - ** Tell PCI support another PCI bus was found. - ** Walks PCI bus for us too. - */ + if (lba_dev->hba.bus_num.start < lba_next_bus) + lba_dev->hba.bus_num.start = lba_next_bus; + dev->dev.platform_data = lba_dev; lba_bus = lba_dev->hba.hba_bus = pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start, cfg_ops, NULL); - if (lba_bus) + if (lba_bus) { + lba_next_bus = lba_bus->subordinate + 1; pci_bus_add_devices(lba_bus); + } /* This is in lieu of calling pci_assign_unassigned_resources() */ if (is_pdc_pat()) { |