diff options
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_ctrl.c')
-rw-r--r-- | drivers/pci/hotplug/cpqphp_ctrl.c | 64 |
1 files changed, 32 insertions, 32 deletions
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 4018420c6f9..ef041ca91c2 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -737,12 +737,12 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) for (node = *head; node; node = node->next) { dbg("%s: req_size =%x node=%p, base=%x, length=%x\n", - __FUNCTION__, size, node, node->base, node->length); + __func__, size, node, node->base, node->length); if (node->length < size) continue; if (node->base & (size - 1)) { - dbg("%s: not aligned\n", __FUNCTION__); + dbg("%s: not aligned\n", __func__); /* this one isn't base aligned properly * so we'll make a new entry and split it up */ temp_dword = (node->base | (size-1)) + 1; @@ -767,7 +767,7 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) /* Don't need to check if too small since we already did */ if (node->length > size) { - dbg("%s: too big\n", __FUNCTION__); + dbg("%s: too big\n", __func__); /* this one is longer than we need * so we'll make a new entry and split it up */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); @@ -784,7 +784,7 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) node->next = split_node; } /* End of too big on top end */ - dbg("%s: got one!!!\n", __FUNCTION__); + dbg("%s: got one!!!\n", __func__); /* If we got here, then it is the right size * Now take it out of the list */ if (*head == node) { @@ -819,7 +819,7 @@ int cpqhp_resource_sort_and_combine(struct pci_resource **head) struct pci_resource *node2; int out_of_order = 1; - dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head); + dbg("%s: head = %p, *head = %p\n", __func__, head, *head); if (!(*head)) return 1; @@ -907,7 +907,7 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data) /* Read to clear posted writes */ misc = readw(ctrl->hpc_reg + MISC); - dbg ("%s - waking up\n", __FUNCTION__); + dbg ("%s - waking up\n", __func__); wake_up_interruptible(&ctrl->queue); } @@ -1421,7 +1421,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) hp_slot = func->device - ctrl->slot_device_offset; dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", - __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + __func__, func->device, ctrl->slot_device_offset, hp_slot); mutex_lock(&ctrl->crit_sect); @@ -1466,55 +1466,55 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) /* turn on board and blink green LED */ - dbg("%s: before down\n", __FUNCTION__); + dbg("%s: before down\n", __func__); mutex_lock(&ctrl->crit_sect); - dbg("%s: after down\n", __FUNCTION__); + dbg("%s: after down\n", __func__); - dbg("%s: before slot_enable\n", __FUNCTION__); + dbg("%s: before slot_enable\n", __func__); slot_enable (ctrl, hp_slot); - dbg("%s: before green_LED_blink\n", __FUNCTION__); + dbg("%s: before green_LED_blink\n", __func__); green_LED_blink (ctrl, hp_slot); - dbg("%s: before amber_LED_blink\n", __FUNCTION__); + dbg("%s: before amber_LED_blink\n", __func__); amber_LED_off (ctrl, hp_slot); - dbg("%s: before set_SOGO\n", __FUNCTION__); + dbg("%s: before set_SOGO\n", __func__); set_SOGO(ctrl); /* Wait for SOBS to be unset */ - dbg("%s: before wait_for_ctrl_irq\n", __FUNCTION__); + dbg("%s: before wait_for_ctrl_irq\n", __func__); wait_for_ctrl_irq (ctrl); - dbg("%s: after wait_for_ctrl_irq\n", __FUNCTION__); + dbg("%s: after wait_for_ctrl_irq\n", __func__); - dbg("%s: before up\n", __FUNCTION__); + dbg("%s: before up\n", __func__); mutex_unlock(&ctrl->crit_sect); - dbg("%s: after up\n", __FUNCTION__); + dbg("%s: after up\n", __func__); /* Wait for ~1 second because of hot plug spec */ - dbg("%s: before long_delay\n", __FUNCTION__); + dbg("%s: before long_delay\n", __func__); long_delay(1*HZ); - dbg("%s: after long_delay\n", __FUNCTION__); + dbg("%s: after long_delay\n", __func__); - dbg("%s: func status = %x\n", __FUNCTION__, func->status); + dbg("%s: func status = %x\n", __func__, func->status); /* Check for a power fault */ if (func->status == 0xFF) { /* power fault occurred, but it was benign */ temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); + dbg("%s: temp register set to %x by power fault\n", __func__, temp_register); rc = POWER_FAILURE; func->status = 0; } else { /* Get vendor/device ID u32 */ ctrl->pci_bus->number = func->bus; rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, &temp_register); - dbg("%s: pci_read_config_dword returns %d\n", __FUNCTION__, rc); - dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register); + dbg("%s: pci_read_config_dword returns %d\n", __func__, rc); + dbg("%s: temp_register is %x\n", __func__, temp_register); if (rc != 0) { /* Something's wrong here */ temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register); + dbg("%s: temp register set to %x by error\n", __func__, temp_register); } /* Preset return code. It will be changed later if things go okay. */ rc = NO_ADAPTER_PRESENT; @@ -1530,7 +1530,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) rc = configure_new_device(ctrl, func, 0, &res_lists); - dbg("%s: back from configure_new_device\n", __FUNCTION__); + dbg("%s: back from configure_new_device\n", __func__); ctrl->io_head = res_lists.io_head; ctrl->mem_head = res_lists.mem_head; ctrl->p_mem_head = res_lists.p_mem_head; @@ -1566,7 +1566,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) /* next, we will instantiate the linux pci_dev structures (with * appropriate driver notification, if already present) */ - dbg("%s: configure linux pci_dev structure\n", __FUNCTION__); + dbg("%s: configure linux pci_dev structure\n", __func__); index = 0; do { new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++); @@ -1628,7 +1628,7 @@ static u32 remove_board(struct pci_func * func, u32 replace_flag, struct control device = func->device; hp_slot = func->device - ctrl->slot_device_offset; - dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); + dbg("In %s, hp_slot = %d\n", __func__, hp_slot); /* When we get here, it is safe to change base address registers. * We will attempt to save the base address register lengths */ @@ -1928,7 +1928,7 @@ void cpqhp_pushbutton_thread(unsigned long slot) func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0); dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl); if (!func) { - dbg("Error! func NULL in %s\n", __FUNCTION__); + dbg("Error! func NULL in %s\n", __func__); return ; } @@ -1950,7 +1950,7 @@ void cpqhp_pushbutton_thread(unsigned long slot) func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0); dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl); if (!func) { - dbg("Error! func NULL in %s\n", __FUNCTION__); + dbg("Error! func NULL in %s\n", __func__); return ; } @@ -2058,7 +2058,7 @@ int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func) } if (rc) { - dbg("%s: rc = %d\n", __FUNCTION__, rc); + dbg("%s: rc = %d\n", __func__, rc); } if (p_slot) @@ -2269,12 +2269,12 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func new_slot = func; - dbg("%s\n", __FUNCTION__); + dbg("%s\n", __func__); /* Check for Multi-function device */ ctrl->pci_bus->number = func->bus; rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte); if (rc) { - dbg("%s: rc = %d\n", __FUNCTION__, rc); + dbg("%s: rc = %d\n", __func__, rc); return rc; } |