summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/pciehp_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug/pciehp_pci.c')
-rw-r--r--drivers/pci/hotplug/pciehp_pci.c349
1 files changed, 22 insertions, 327 deletions
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index db59a06ab0b..1d185c1bc77 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -101,346 +101,41 @@ int pciehp_configure_device(struct slot *p_slot)
return 0;
}
-int pciehp_unconfigure_device(struct pci_func* func)
+int pciehp_unconfigure_device(struct slot *p_slot)
{
int rc = 0;
int j;
- struct pci_bus *pbus;
+ u8 bctl = 0;
- dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
- func->device, func->function);
- pbus = func->pci_dev->bus;
+ dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus,
+ p_slot->device);
for (j=0; j<8 ; j++) {
- struct pci_dev* temp = pci_find_slot(func->bus,
- (func->device << 3) | j);
- if (temp) {
- pci_remove_bus_device(temp);
+ struct pci_dev* temp = pci_find_slot(p_slot->bus,
+ (p_slot->device << 3) | j);
+ if (!temp)
+ continue;
+ if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ err("Cannot remove display device %s\n",
+ pci_name(temp));
+ continue;
+ }
+ if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
+ if (bctl & PCI_BRIDGE_CTL_VGA) {
+ err("Cannot remove display device %s\n",
+ pci_name(temp));
+ continue;
+ }
}
+ pci_remove_bus_device(temp);
}
/*
* Some PCI Express root ports require fixup after hot-plug operation.
*/
if (pcie_mch_quirk)
- pci_fixup_device(pci_fixup_final, pbus->self);
+ pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);
return rc;
}
-/*
- * pciehp_save_config
- *
- * Reads configuration for all slots in a PCI bus and saves info.
- *
- * Note: For non-hot plug busses, the slot # saved is the device #
- *
- * returns 0 if success
- */
-int pciehp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
-{
- int rc;
- u8 class_code;
- u8 header_type;
- u32 ID;
- u8 secondary_bus;
- struct pci_func *new_slot;
- int sub_bus;
- int max_functions;
- int function;
- u8 DevError;
- int device = 0;
- int cloop = 0;
- int stop_it;
- int index;
- int is_hot_plug = num_ctlr_slots || first_device_num;
- struct pci_bus lpci_bus, *pci_bus;
- int FirstSupported, LastSupported;
-
- dbg("%s: Enter\n", __FUNCTION__);
-
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
-
- dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
- num_ctlr_slots, first_device_num);
-
- /* Decide which slots are supported */
- if (is_hot_plug) {
- /*********************************
- * is_hot_plug is the slot mask
- *********************************/
- FirstSupported = first_device_num;
- LastSupported = FirstSupported + num_ctlr_slots - 1;
- } else {
- FirstSupported = 0;
- LastSupported = 0x1F;
- }
-
- dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
- LastSupported);
-
- /* Save PCI configuration space for all devices in supported slots */
- dbg("%s: pci_bus->number = %x\n", __FUNCTION__, pci_bus->number);
- pci_bus->number = busnumber;
- dbg("%s: bus = %x, dev = %x\n", __FUNCTION__, busnumber, device);
- for (device = FirstSupported; device <= LastSupported; device++) {
- ID = 0xFFFFFFFF;
- rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
- PCI_VENDOR_ID, &ID);
-
- if (ID != 0xFFFFFFFF) { /* device in slot */
- dbg("%s: ID = %x\n", __FUNCTION__, ID);
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
- 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
- PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- dbg("class_code = %x, header_type = %x\n", class_code, header_type);
-
- /* If multi-function device, set max_functions to 8 */
- if (header_type & 0x80)
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- DevError = 0;
- dbg("%s: In do loop\n", __FUNCTION__);
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */
- /* Recurse the subordinate bus
- * get the subordinate bus number
- */
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- PCI_SECONDARY_BUS, &secondary_bus);
- if (rc) {
- return rc;
- } else {
- sub_bus = (int) secondary_bus;
-
- /* Save secondary bus cfg spc with this recursive call. */
- rc = pciehp_save_config(ctrl, sub_bus, 0, 0);
- if (rc)
- return rc;
- }
- }
-
- index = 0;
- new_slot = pciehp_slot_find(busnumber, device, index++);
-
- dbg("%s: new_slot = %p bus %x dev %x fun %x\n",
- __FUNCTION__, new_slot, busnumber, device, index-1);
-
- while (new_slot && (new_slot->function != (u8) function)) {
- new_slot = pciehp_slot_find(busnumber, device, index++);
- dbg("%s: while loop, new_slot = %p bus %x dev %x fun %x\n",
- __FUNCTION__, new_slot, busnumber, device, index-1);
- }
- if (!new_slot) {
- /* Setup slot structure. */
- new_slot = pciehp_slot_create(busnumber);
- dbg("%s: if, new_slot = %p bus %x dev %x fun %x\n",
- __FUNCTION__, new_slot, busnumber, device, function);
-
- if (new_slot == NULL)
- return(1);
- }
-
- new_slot->bus = (u8) busnumber;
- new_slot->device = (u8) device;
- new_slot->function = (u8) function;
- new_slot->is_a_board = 1;
- new_slot->switch_save = 0x10;
- /* In case of unsupported board */
- new_slot->status = DevError;
- new_slot->pci_dev = pci_find_slot(new_slot->bus,
- (new_slot->device << 3) | new_slot->function);
- dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- rc = pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(device, function),
- cloop << 2,
- (u32 *) &(new_slot->config_space [cloop]));
- /* dbg("new_slot->config_space[%x] = %x\n",
- cloop, new_slot->config_space[cloop]); */
- if (rc)
- return rc;
- }
-
- function++;
-
- stop_it = 0;
-
- /* this loop skips to the next present function
- * reading in Class Code and Header type.
- */
-
- while ((function < max_functions)&&(!stop_it)) {
- dbg("%s: In while loop \n", __FUNCTION__);
- rc = pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(device, function),
- PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { /* nothing there. */
- function++;
- dbg("Nothing there\n");
- } else { /* Something there */
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- dbg("class_code = %x, header_type = %x\n", class_code, header_type);
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- /* End of IF (device in slot?) */
- } else if (is_hot_plug) {
- /* Setup slot structure with entry for empty slot */
- new_slot = pciehp_slot_create(busnumber);
-
- if (new_slot == NULL) {
- return(1);
- }
- dbg("new_slot = %p, bus = %x, dev = %x, fun = %x\n", new_slot,
- new_slot->bus, new_slot->device, new_slot->function);
-
- new_slot->bus = (u8) busnumber;
- new_slot->device = (u8) device;
- new_slot->function = 0;
- new_slot->is_a_board = 0;
- new_slot->presence_save = 0;
- new_slot->switch_save = 0;
- }
- } /* End of FOR loop */
-
- dbg("%s: Exit\n", __FUNCTION__);
- return(0);
-}
-
-
-/*
- * pciehp_save_slot_config
- *
- * Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
- *
- * returns 0 if success
- */
-int pciehp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
-{
- int rc;
- u8 class_code;
- u8 header_type;
- u32 ID;
- u8 secondary_bus;
- int sub_bus;
- int max_functions;
- int function;
- int cloop = 0;
- int stop_it;
- struct pci_bus lpci_bus, *pci_bus;
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = new_slot->bus;
-
- ID = 0xFFFFFFFF;
-
- pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
- PCI_VENDOR_ID, &ID);
-
- if (ID != 0xFFFFFFFF) { /* device in slot */
- pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
- 0x0B, &class_code);
-
- pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
- PCI_HEADER_TYPE, &header_type);
-
- if (header_type & 0x80) /* Multi-function device */
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
- /* Recurse the subordinate bus */
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_SECONDARY_BUS, &secondary_bus);
-
- sub_bus = (int) secondary_bus;
-
- /* Save the config headers for the secondary bus. */
- rc = pciehp_save_config(ctrl, sub_bus, 0, 0);
-
- if (rc)
- return rc;
-
- } /* End of IF */
-
- new_slot->status = 0;
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- cloop << 2,
- (u32 *) &(new_slot->config_space [cloop]));
- }
-
- function++;
-
- stop_it = 0;
-
- /* this loop skips to the next present function
- * reading in the Class Code and the Header type.
- */
-
- while ((function < max_functions) && (!stop_it)) {
- pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { /* nothing there. */
- function++;
- } else { /* Something there */
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- 0x0B, &class_code);
-
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_HEADER_TYPE, &header_type);
-
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- } /* End of IF (device in slot?) */
- else {
- return 2;
- }
-
- return 0;
-}
-
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 03:44:44 +0000