1 files changed, 43 insertions, 30 deletions

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 1dc78c5cabf..f79cbcd3944 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -248,31 +248,26 @@ struct drv_dev_and_id {
 static long local_pci_probe(void *_ddi)
 {
 	struct drv_dev_and_id *ddi = _ddi;
-	struct device *dev = &ddi->dev->dev;
-	struct device *parent = dev->parent;
+	struct pci_dev *pci_dev = ddi->dev;
+	struct pci_driver *pci_drv = ddi->drv;
+	struct device *dev = &pci_dev->dev;
 	int rc;
 
-	/* The parent bridge must be in active state when probing */
-	if (parent)
-		pm_runtime_get_sync(parent);
-	/* Unbound PCI devices are always set to disabled and suspended.
-	 * During probe, the device is set to enabled and active and the
-	 * usage count is incremented.  If the driver supports runtime PM,
-	 * it should call pm_runtime_put_noidle() in its probe routine and
-	 * pm_runtime_get_noresume() in its remove routine.
+	/*
+	 * Unbound PCI devices are always put in D0, regardless of
+	 * runtime PM status.  During probe, the device is set to
+	 * active and the usage count is incremented.  If the driver
+	 * supports runtime PM, it should call pm_runtime_put_noidle()
+	 * in its probe routine and pm_runtime_get_noresume() in its
+	 * remove routine.
 	 */
-	pm_runtime_get_noresume(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	rc = ddi->drv->probe(ddi->dev, ddi->id);
+	pm_runtime_get_sync(dev);
+	pci_dev->driver = pci_drv;
+	rc = pci_drv->probe(pci_dev, ddi->id);
 	if (rc) {
-		pm_runtime_disable(dev);
-		pm_runtime_set_suspended(dev);
-		pm_runtime_put_noidle(dev);
+		pci_dev->driver = NULL;
+		pm_runtime_put_sync(dev);
 	}
-	if (parent)
-		pm_runtime_put(parent);
 	return rc;
 }
 
@@ -322,10 +317,8 @@ __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev)
 		id = pci_match_device(drv, pci_dev);
 		if (id)
 			error = pci_call_probe(drv, pci_dev, id);
-		if (error >= 0) {
-			pci_dev->driver = drv;
+		if (error >= 0)
 			error = 0;
-		}
 	}
 	return error;
 }
@@ -361,9 +354,7 @@ static int pci_device_remove(struct device * dev)
 	}
 
 	/* Undo the runtime PM settings in local_pci_probe() */
-	pm_runtime_disable(dev);
-	pm_runtime_set_suspended(dev);
-	pm_runtime_put_noidle(dev);
+	pm_runtime_put_sync(dev);
 
 	/*
 	 * If the device is still on, set the power state as "unknown",
@@ -986,6 +977,13 @@ static int pci_pm_runtime_suspend(struct device *dev)
 	pci_power_t prev = pci_dev->current_state;
 	int error;
 
+	/*
+	 * If pci_dev->driver is not set (unbound), the device should
+	 * always remain in D0 regardless of the runtime PM status
+	 */
+	if (!pci_dev->driver)
+		return 0;
+
 	if (!pm || !pm->runtime_suspend)
 		return -ENOSYS;
 
@@ -1007,10 +1005,10 @@ static int pci_pm_runtime_suspend(struct device *dev)
 		return 0;
 	}
 
-	if (!pci_dev->state_saved)
+	if (!pci_dev->state_saved) {
 		pci_save_state(pci_dev);
-
-	pci_finish_runtime_suspend(pci_dev);
+		pci_finish_runtime_suspend(pci_dev);
+	}
 
 	return 0;
 }
@@ -1021,6 +1019,13 @@ static int pci_pm_runtime_resume(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
+	/*
+	 * If pci_dev->driver is not set (unbound), the device should
+	 * always remain in D0 regardless of the runtime PM status
+	 */
+	if (!pci_dev->driver)
+		return 0;
+
 	if (!pm || !pm->runtime_resume)
 		return -ENOSYS;
 
@@ -1038,8 +1043,16 @@ static int pci_pm_runtime_resume(struct device *dev)
 
 static int pci_pm_runtime_idle(struct device *dev)
 {
+	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
+	/*
+	 * If pci_dev->driver is not set (unbound), the device should
+	 * always remain in D0 regardless of the runtime PM status
+	 */
+	if (!pci_dev->driver)
+		goto out;
+
 	if (!pm)
 		return -ENOSYS;
 
@@ -1049,8 +1062,8 @@ static int pci_pm_runtime_idle(struct device *dev)
 			return ret;
 	}
 
+out:
 	pm_runtime_suspend(dev);
-
 	return 0;
 }