summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c505
1 files changed, 400 insertions, 105 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 061d1ee0046..e491fdedf70 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -56,6 +56,22 @@ unsigned char pci_bus_max_busnr(struct pci_bus* bus)
}
EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
+#ifdef CONFIG_HAS_IOMEM
+void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
+{
+ /*
+ * Make sure the BAR is actually a memory resource, not an IO resource
+ */
+ if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
+ WARN_ON(1);
+ return NULL;
+ }
+ return ioremap_nocache(pci_resource_start(pdev, bar),
+ pci_resource_len(pdev, bar));
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_bar);
+#endif
+
#if 0
/**
* pci_max_busnr - returns maximum PCI bus number
@@ -360,25 +376,10 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
static void
pci_restore_bars(struct pci_dev *dev)
{
- int i, numres;
-
- switch (dev->hdr_type) {
- case PCI_HEADER_TYPE_NORMAL:
- numres = 6;
- break;
- case PCI_HEADER_TYPE_BRIDGE:
- numres = 2;
- break;
- case PCI_HEADER_TYPE_CARDBUS:
- numres = 1;
- break;
- default:
- /* Should never get here, but just in case... */
- return;
- }
+ int i;
- for (i = 0; i < numres; i ++)
- pci_update_resource(dev, &dev->resource[i], i);
+ for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
+ pci_update_resource(dev, i);
}
static struct pci_platform_pm_ops *pci_platform_pm;
@@ -524,14 +525,17 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
* pci_update_current_state - Read PCI power state of given device from its
* PCI PM registers and cache it
* @dev: PCI device to handle.
+ * @state: State to cache in case the device doesn't have the PM capability
*/
-static void pci_update_current_state(struct pci_dev *dev)
+void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
{
if (dev->pm_cap) {
u16 pmcsr;
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ } else {
+ dev->current_state = state;
}
}
@@ -574,7 +578,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
*/
int ret = platform_pci_set_power_state(dev, PCI_D0);
if (!ret)
- pci_update_current_state(dev);
+ pci_update_current_state(dev, PCI_D0);
}
/* This device is quirked not to be put into D3, so
don't put it in D3 */
@@ -587,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
/* Allow the platform to finalize the transition */
int ret = platform_pci_set_power_state(dev, state);
if (!ret) {
- pci_update_current_state(dev);
+ pci_update_current_state(dev, state);
error = 0;
}
}
@@ -640,19 +644,14 @@ static int pci_save_pcie_state(struct pci_dev *dev)
int pos, i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
- int found = 0;
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pos <= 0)
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
- if (!save_state)
- save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
- else
- found = 1;
if (!save_state) {
- dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__);
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
@@ -661,9 +660,7 @@ static int pci_save_pcie_state(struct pci_dev *dev)
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
- save_state->cap_nr = PCI_CAP_ID_EXP;
- if (!found)
- pci_add_saved_cap(dev, save_state);
+
return 0;
}
@@ -688,30 +685,21 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
static int pci_save_pcix_state(struct pci_dev *dev)
{
- int pos, i = 0;
+ int pos;
struct pci_cap_saved_state *save_state;
- u16 *cap;
- int found = 0;
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (pos <= 0)
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
- if (!save_state)
- save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
- else
- found = 1;
if (!save_state) {
- dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__);
return -ENOMEM;
}
- cap = (u16 *)&save_state->data[0];
- pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
- save_state->cap_nr = PCI_CAP_ID_PCIX;
- if (!found)
- pci_add_saved_cap(dev, save_state);
+ pci_read_config_word(dev, pos + PCI_X_CMD, (u16 *)save_state->data);
+
return 0;
}
@@ -982,6 +970,32 @@ void pcim_pin_device(struct pci_dev *pdev)
*/
void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
+static void do_pci_disable_device(struct pci_dev *dev)
+{
+ u16 pci_command;
+
+ pci_read_config_word(dev, PCI_COMMAND, &pci_command);
+ if (pci_command & PCI_COMMAND_MASTER) {
+ pci_command &= ~PCI_COMMAND_MASTER;
+ pci_write_config_word(dev, PCI_COMMAND, pci_command);
+ }
+
+ pcibios_disable_device(dev);
+}
+
+/**
+ * pci_disable_enabled_device - Disable device without updating enable_cnt
+ * @dev: PCI device to disable
+ *
+ * NOTE: This function is a backend of PCI power management routines and is
+ * not supposed to be called drivers.
+ */
+void pci_disable_enabled_device(struct pci_dev *dev)
+{
+ if (atomic_read(&dev->enable_cnt))
+ do_pci_disable_device(dev);
+}
+
/**
* pci_disable_device - Disable PCI device after use
* @dev: PCI device to be disabled
@@ -996,7 +1010,6 @@ void
pci_disable_device(struct pci_dev *dev)
{
struct pci_devres *dr;
- u16 pci_command;
dr = find_pci_dr(dev);
if (dr)
@@ -1005,14 +1018,9 @@ pci_disable_device(struct pci_dev *dev)
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
return;
- pci_read_config_word(dev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_MASTER) {
- pci_command &= ~PCI_COMMAND_MASTER;
- pci_write_config_word(dev, PCI_COMMAND, pci_command);
- }
- dev->is_busmaster = 0;
+ do_pci_disable_device(dev);
- pcibios_disable_device(dev);
+ dev->is_busmaster = 0;
}
/**
@@ -1107,7 +1115,7 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
int error = 0;
bool pme_done = false;
- if (!device_may_wakeup(&dev->dev))
+ if (enable && !device_may_wakeup(&dev->dev))
return -EINVAL;
/*
@@ -1301,6 +1309,71 @@ void pci_pm_init(struct pci_dev *dev)
}
/**
+ * platform_pci_wakeup_init - init platform wakeup if present
+ * @dev: PCI device
+ *
+ * Some devices don't have PCI PM caps but can still generate wakeup
+ * events through platform methods (like ACPI events). If @dev supports
+ * platform wakeup events, set the device flag to indicate as much. This
+ * may be redundant if the device also supports PCI PM caps, but double
+ * initialization should be safe in that case.
+ */
+void platform_pci_wakeup_init(struct pci_dev *dev)
+{
+ if (!platform_pci_can_wakeup(dev))
+ return;
+
+ device_set_wakeup_capable(&dev->dev, true);
+ device_set_wakeup_enable(&dev->dev, false);
+ platform_pci_sleep_wake(dev, false);
+}
+
+/**
+ * pci_add_save_buffer - allocate buffer for saving given capability registers
+ * @dev: the PCI device
+ * @cap: the capability to allocate the buffer for
+ * @size: requested size of the buffer
+ */
+static int pci_add_cap_save_buffer(
+ struct pci_dev *dev, char cap, unsigned int size)
+{
+ int pos;
+ struct pci_cap_saved_state *save_state;
+
+ pos = pci_find_capability(dev, cap);
+ if (pos <= 0)
+ return 0;
+
+ save_state = kzalloc(sizeof(*save_state) + size, GFP_KERNEL);
+ if (!save_state)
+ return -ENOMEM;
+
+ save_state->cap_nr = cap;
+ pci_add_saved_cap(dev, save_state);
+
+ return 0;
+}
+
+/**
+ * pci_allocate_cap_save_buffers - allocate buffers for saving capabilities
+ * @dev: the PCI device
+ */
+void pci_allocate_cap_save_buffers(struct pci_dev *dev)
+{
+ int error;
+
+ error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP, 4 * sizeof(u16));
+ if (error)
+ dev_err(&dev->dev,
+ "unable to preallocate PCI Express save buffer\n");
+
+ error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_PCIX, sizeof(u16));
+ if (error)
+ dev_err(&dev->dev,
+ "unable to preallocate PCI-X save buffer\n");
+}
+
+/**
* pci_enable_ari - enable ARI forwarding if hardware support it
* @dev: the PCI device
*/
@@ -1337,6 +1410,20 @@ void pci_enable_ari(struct pci_dev *dev)
bridge->ari_enabled = 1;
}
+/**
+ * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
+ * @dev: the PCI device
+ * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
+ *
+ * Perform INTx swizzling for a device behind one level of bridge. This is
+ * required by section 9.1 of the PCI-to-PCI bridge specification for devices
+ * behind bridges on add-in cards.
+ */
+u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
+{
+ return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+}
+
int
pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
{
@@ -1345,9 +1432,9 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
pin = dev->pin;
if (!pin)
return -1;
- pin--;
+
while (dev->bus->self) {
- pin = (pin + PCI_SLOT(dev->devfn)) % 4;
+ pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
*bridge = dev;
@@ -1355,6 +1442,26 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
}
/**
+ * pci_common_swizzle - swizzle INTx all the way to root bridge
+ * @dev: the PCI device
+ * @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
+ *
+ * Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
+ * bridges all the way up to a PCI root bus.
+ */
+u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ u8 pin = *pinp;
+
+ while (dev->bus->self) {
+ pin = pci_swizzle_interrupt_pin(dev, pin);
+ dev = dev->bus->self;
+ }
+ *pinp = pin;
+ return PCI_SLOT(dev->devfn);
+}
+
+/**
* pci_release_region - Release a PCI bar
* @pdev: PCI device whose resources were previously reserved by pci_request_region
* @bar: BAR to release
@@ -1395,7 +1502,8 @@ void pci_release_region(struct pci_dev *pdev, int bar)
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
-int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
+static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name,
+ int exclusive)
{
struct pci_devres *dr;
@@ -1408,8 +1516,9 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
goto err_out;
}
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
- if (!request_mem_region(pci_resource_start(pdev, bar),
- pci_resource_len(pdev, bar), res_name))
+ if (!__request_mem_region(pci_resource_start(pdev, bar),
+ pci_resource_len(pdev, bar), res_name,
+ exclusive))
goto err_out;
}
@@ -1428,6 +1537,47 @@ err_out:
}
/**
+ * pci_request_region - Reserved PCI I/O and memory resource
+ * @pdev: PCI device whose resources are to be reserved
+ * @bar: BAR to be reserved
+ * @res_name: Name to be associated with resource.
+ *
+ * Mark the PCI region associated with PCI device @pdev BR @bar as
+ * being reserved by owner @res_name. Do not access any
+ * address inside the PCI regions unless this call returns
+ * successfully.
+ *
+ * Returns 0 on success, or %EBUSY on error. A warning
+ * message is also printed on failure.
+ */
+int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
+{
+ return __pci_request_region(pdev, bar, res_name, 0);
+}
+
+/**
+ * pci_request_region_exclusive - Reserved PCI I/O and memory resource
+ * @pdev: PCI device whose resources are to be reserved
+ * @bar: BAR to be reserved
+ * @res_name: Name to be associated with resource.
+ *
+ * Mark the PCI region associated with PCI device @pdev BR @bar as
+ * being reserved by owner @res_name. Do not access any
+ * address inside the PCI regions unless this call returns
+ * successfully.
+ *
+ * Returns 0 on success, or %EBUSY on error. A warning
+ * message is also printed on failure.
+ *
+ * The key difference that _exclusive makes it that userspace is
+ * explicitly not allowed to map the resource via /dev/mem or
+ * sysfs.
+ */
+int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
+{
+ return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE);
+}
+/**
* pci_release_selected_regions - Release selected PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved
* @bars: Bitmask of BARs to be released
@@ -1444,20 +1594,14 @@ void pci_release_selected_regions(struct pci_dev *pdev, int bars)
pci_release_region(pdev, i);
}
-/**
- * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
- * @pdev: PCI device whose resources are to be reserved
- * @bars: Bitmask of BARs to be requested
- * @res_name: Name to be associated with resource
- */
-int pci_request_selected_regions(struct pci_dev *pdev, int bars,
- const char *res_name)
+int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name, int excl)
{
int i;
for (i = 0; i < 6; i++)
if (bars & (1 << i))
- if(pci_request_region(pdev, i, res_name))
+ if (__pci_request_region(pdev, i, res_name, excl))
goto err_out;
return 0;
@@ -1469,6 +1613,26 @@ err_out:
return -EBUSY;
}
+
+/**
+ * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @bars: Bitmask of BARs to be requested
+ * @res_name: Name to be associated with resource
+ */
+int pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name)
+{
+ return __pci_request_selected_regions(pdev, bars, res_name, 0);
+}
+
+int pci_request_selected_regions_exclusive(struct pci_dev *pdev,
+ int bars, const char *res_name)
+{
+ return __pci_request_selected_regions(pdev, bars, res_name,
+ IORESOURCE_EXCLUSIVE);
+}
+
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved by pci_request_regions
@@ -1502,27 +1666,66 @@ int pci_request_regions(struct pci_dev *pdev, const char *res_name)
}
/**
+ * pci_request_regions_exclusive - Reserved PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @res_name: Name to be associated with resource.
+ *
+ * Mark all PCI regions associated with PCI device @pdev as
+ * being reserved by owner @res_name. Do not access any
+ * address inside the PCI regions unless this call returns
+ * successfully.
+ *
+ * pci_request_regions_exclusive() will mark the region so that
+ * /dev/mem and the sysfs MMIO access will not be allowed.
+ *
+ * Returns 0 on success, or %EBUSY on error. A warning
+ * message is also printed on failure.
+ */
+int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
+{
+ return pci_request_selected_regions_exclusive(pdev,
+ ((1 << 6) - 1), res_name);
+}
+
+static void __pci_set_master(struct pci_dev *dev, bool enable)
+{
+ u16 old_cmd, cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &old_cmd);
+ if (enable)
+ cmd = old_cmd | PCI_COMMAND_MASTER;
+ else
+ cmd = old_cmd & ~PCI_COMMAND_MASTER;
+ if (cmd != old_cmd) {
+ dev_dbg(&dev->dev, "%s bus mastering\n",
+ enable ? "enabling" : "disabling");
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ dev->is_busmaster = enable;
+}
+
+/**
* pci_set_master - enables bus-mastering for device dev
* @dev: the PCI device to enable
*
* Enables bus-mastering on the device and calls pcibios_set_master()
* to do the needed arch specific settings.
*/
-void
-pci_set_master(struct pci_dev *dev)
+void pci_set_master(struct pci_dev *dev)
{
- u16 cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- if (! (cmd & PCI_COMMAND_MASTER)) {
- dev_dbg(&dev->dev, "enabling bus mastering\n");
- cmd |= PCI_COMMAND_MASTER;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- dev->is_busmaster = 1;
+ __pci_set_master(dev, true);
pcibios_set_master(dev);
}
+/**
+ * pci_clear_master - disables bus-mastering for device dev
+ * @dev: the PCI device to disable
+ */
+void pci_clear_master(struct pci_dev *dev)
+{
+ __pci_set_master(dev, false);
+}
+
#ifdef PCI_DISABLE_MWI
int pci_set_mwi(struct pci_dev *dev)
{
@@ -1751,24 +1954,7 @@ int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
EXPORT_SYMBOL(pci_set_dma_seg_boundary);
#endif
-/**
- * pci_execute_reset_function() - Reset a PCI device function
- * @dev: Device function to reset
- *
- * Some devices allow an individual function to be reset without affecting
- * other functions in the same device. The PCI device must be responsive
- * to PCI config space in order to use this function.
- *
- * The device function is presumed to be unused when this function is called.
- * Resetting the device will make the contents of PCI configuration space
- * random, so any caller of this must be prepared to reinitialise the
- * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
- * etc.
- *
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
- * device doesn't support resetting a single function.
- */
-int pci_execute_reset_function(struct pci_dev *dev)
+static int __pcie_flr(struct pci_dev *dev, int probe)
{
u16 status;
u32 cap;
@@ -1780,6 +1966,9 @@ int pci_execute_reset_function(struct pci_dev *dev)
if (!(cap & PCI_EXP_DEVCAP_FLR))
return -ENOTTY;
+ if (probe)
+ return 0;
+
pci_block_user_cfg_access(dev);
/* Wait for Transaction Pending bit clean */
@@ -1802,6 +1991,80 @@ int pci_execute_reset_function(struct pci_dev *dev)
pci_unblock_user_cfg_access(dev);
return 0;
}
+
+static int __pci_af_flr(struct pci_dev *dev, int probe)
+{
+ int cappos = pci_find_capability(dev, PCI_CAP_ID_AF);
+ u8 status;
+ u8 cap;
+
+ if (!cappos)
+ return -ENOTTY;
+ pci_read_config_byte(dev, cappos + PCI_AF_CAP, &cap);
+ if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_block_user_cfg_access(dev);
+
+ /* Wait for Transaction Pending bit clean */
+ msleep(100);
+ pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
+ if (status & PCI_AF_STATUS_TP) {
+ dev_info(&dev->dev, "Busy after 100ms while trying to"
+ " reset; sleeping for 1 second\n");
+ ssleep(1);
+ pci_read_config_byte(dev,
+ cappos + PCI_AF_STATUS, &status);
+ if (status & PCI_AF_STATUS_TP)
+ dev_info(&dev->dev, "Still busy after 1s; "
+ "proceeding with reset anyway\n");
+ }
+ pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
+ mdelay(100);
+
+ pci_unblock_user_cfg_access(dev);
+ return 0;
+}
+
+static int __pci_reset_function(struct pci_dev *pdev, int probe)
+{
+ int res;
+
+ res = __pcie_flr(pdev, probe);
+ if (res != -ENOTTY)
+ return res;
+
+ res = __pci_af_flr(pdev, probe);
+ if (res != -ENOTTY)
+ return res;
+
+ return res;
+}
+
+/**
+ * pci_execute_reset_function() - Reset a PCI device function
+ * @dev: Device function to reset
+ *
+ * Some devices allow an individual function to be reset without affecting
+ * other functions in the same device. The PCI device must be responsive
+ * to PCI config space in order to use this function.
+ *
+ * The device function is presumed to be unused when this function is called.
+ * Resetting the device will make the contents of PCI configuration space
+ * random, so any caller of this must be prepared to reinitialise the
+ * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
+ * etc.
+ *
+ * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * device doesn't support resetting a single function.
+ */
+int pci_execute_reset_function(struct pci_dev *dev)
+{
+ return __pci_reset_function(dev, 0);
+}
EXPORT_SYMBOL_GPL(pci_execute_reset_function);
/**
@@ -1822,15 +2085,10 @@ EXPORT_SYMBOL_GPL(pci_execute_reset_function);
*/
int pci_reset_function(struct pci_dev *dev)
{
- u32 cap;
- int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- int r;
+ int r = __pci_reset_function(dev, 1);
- if (!exppos)
- return -ENOTTY;
- pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap);
- if (!(cap & PCI_EXP_DEVCAP_FLR))
- return -ENOTTY;
+ if (r < 0)
+ return r;
if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
disable_irq(dev->irq);
@@ -2022,6 +2280,28 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags)
return bars;
}
+/**
+ * pci_resource_bar - get position of the BAR associated with a resource
+ * @dev: the PCI device
+ * @resno: the resource number
+ * @type: the BAR type to be filled in
+ *
+ * Returns BAR position in config space, or 0 if the BAR is invalid.
+ */
+int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
+{
+ if (resno < PCI_ROM_RESOURCE) {
+ *type = pci_bar_unknown;
+ return PCI_BASE_ADDRESS_0 + 4 * resno;
+ } else if (resno == PCI_ROM_RESOURCE) {
+ *type = pci_bar_mem32;
+ return dev->rom_base_reg;
+ }
+
+ dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno);
+ return 0;
+}
+
static void __devinit pci_no_domains(void)
{
#ifdef CONFIG_PCI_DOMAINS
@@ -2029,6 +2309,19 @@ static void __devinit pci_no_domains(void)
#endif
}
+/**
+ * pci_ext_cfg_enabled - can we access extended PCI config space?
+ * @dev: The PCI device of the root bridge.
+ *
+ * Returns 1 if we can access PCI extended config space (offsets
+ * greater than 0xff). This is the default implementation. Architecture
+ * implementations can override this.
+ */
+int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
+{
+ return 1;
+}
+
static int __devinit pci_init(void)
{
struct pci_dev *dev = NULL;
@@ -2037,8 +2330,6 @@ static int __devinit pci_init(void)
pci_fixup_device(pci_fixup_final, dev);
}
- msi_init();
-
return 0;
}
@@ -2083,11 +2374,15 @@ EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
+EXPORT_SYMBOL(pci_request_regions_exclusive);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
+EXPORT_SYMBOL(pci_request_region_exclusive);
EXPORT_SYMBOL(pci_release_selected_regions);
EXPORT_SYMBOL(pci_request_selected_regions);
+EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
EXPORT_SYMBOL(pci_set_master);
+EXPORT_SYMBOL(pci_clear_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);