diff options
Diffstat (limited to 'drivers/pci/pcie/pme')
| -rw-r--r-- | drivers/pci/pcie/pme/Makefile | 8 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/pcie_pme.c | 516 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/pcie_pme.h | 28 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/pcie_pme_acpi.c | 54 |
4 files changed, 0 insertions, 606 deletions
diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile deleted file mode 100644 index 8b923805308..00000000000 --- a/drivers/pci/pcie/pme/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for PCI-Express Root Port PME signaling driver -# - -obj-$(CONFIG_PCIE_PME) += pmedriver.o - -pmedriver-objs := pcie_pme.o -pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c deleted file mode 100644 index bbdea18693d..00000000000 --- a/drivers/pci/pcie/pme/pcie_pme.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - * PCIe Native PME support - * - * Copyright (C) 2007 - 2009 Intel Corp - * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com> - * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License V2. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/pcieport_if.h> -#include <linux/acpi.h> -#include <linux/pci-acpi.h> -#include <linux/pm_runtime.h> - -#include "../../pci.h" -#include "pcie_pme.h" - -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ - -/* - * If set, this switch will prevent the PCIe root port PME service driver from - * being registered. Consequently, the interrupt-based PCIe PME signaling will - * not be used by any PCIe root ports in that case. - */ -static bool pcie_pme_disabled = true; - -/* - * The PCI Express Base Specification 2.0, Section 6.1.8, states the following: - * "In order to maintain compatibility with non-PCI Express-aware system - * software, system power management logic must be configured by firmware to use - * the legacy mechanism of signaling PME by default. PCI Express-aware system - * software must notify the firmware prior to enabling native, interrupt-based - * PME signaling." However, if the platform doesn't provide us with a suitable - * notification mechanism or the notification fails, it is not clear whether or - * not we are supposed to use the interrupt-based PCIe PME signaling. The - * switch below can be used to indicate the desired behaviour. When set, it - * will make the kernel use the interrupt-based PCIe PME signaling regardless of - * the platform notification status, although the kernel will attempt to notify - * the platform anyway. When unset, it will prevent the kernel from using the - * the interrupt-based PCIe PME signaling if the platform notification fails, - * which is the default. - */ -static bool pcie_pme_force_enable; - -/* - * If this switch is set, MSI will not be used for PCIe PME signaling. This - * causes the PCIe port driver to use INTx interrupts only, but it turns out - * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based - * wake-up from system sleep states. - */ -bool pcie_pme_msi_disabled; - -static int __init pcie_pme_setup(char *str) -{ - if (!strncmp(str, "auto", 4)) - pcie_pme_disabled = false; - else if (!strncmp(str, "force", 5)) - pcie_pme_force_enable = true; - - str = strchr(str, ','); - if (str) { - str++; - str += strspn(str, " \t"); - if (*str && !strcmp(str, "nomsi")) - pcie_pme_msi_disabled = true; - } - - return 1; -} -__setup("pcie_pme=", pcie_pme_setup); - -/** - * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME. - * @srv: PCIe PME root port service to use for carrying out the check. - * - * Notify the platform that the native PCIe PME is going to be used and return - * 'true' if the control of the PCIe PME registers has been acquired from the - * platform. - */ -static bool pcie_pme_platform_setup(struct pcie_device *srv) -{ - if (!pcie_pme_platform_notify(srv)) - return true; - return pcie_pme_force_enable; -} - -struct pcie_pme_service_data { - spinlock_t lock; - struct pcie_device *srv; - struct work_struct work; - bool noirq; /* Don't enable the PME interrupt used by this service. */ -}; - -/** - * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation. - * @dev: PCIe root port or event collector. - * @enable: Enable or disable the interrupt. - */ -static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) -{ - int rtctl_pos; - u16 rtctl; - - rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL; - - pci_read_config_word(dev, rtctl_pos, &rtctl); - if (enable) - rtctl |= PCI_EXP_RTCTL_PMEIE; - else - rtctl &= ~PCI_EXP_RTCTL_PMEIE; - pci_write_config_word(dev, rtctl_pos, rtctl); -} - -/** - * pcie_pme_clear_status - Clear root port PME interrupt status. - * @dev: PCIe root port or event collector. - */ -static void pcie_pme_clear_status(struct pci_dev *dev) -{ - int rtsta_pos; - u32 rtsta; - - rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; - - pci_read_config_dword(dev, rtsta_pos, &rtsta); - rtsta |= PCI_EXP_RTSTA_PME; - pci_write_config_dword(dev, rtsta_pos, rtsta); -} - -/** - * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. - * @bus: PCI bus to scan. - * - * Scan given PCI bus and all buses under it for devices asserting PME#. - */ -static bool pcie_pme_walk_bus(struct pci_bus *bus) -{ - struct pci_dev *dev; - bool ret = false; - - list_for_each_entry(dev, &bus->devices, bus_list) { - /* Skip PCIe devices in case we started from a root port. */ - if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { - pm_request_resume(&dev->dev); - pci_wakeup_event(dev); - ret = true; - } - - if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate)) - ret = true; - } - - return ret; -} - -/** - * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME. - * @bus: Secondary bus of the bridge. - * @devfn: Device/function number to check. - * - * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band - * PCIe PME message. In such that case the bridge should use the Requester ID - * of device/function number 0 on its secondary bus. - */ -static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn) -{ - struct pci_dev *dev; - bool found = false; - - if (devfn) - return false; - - dev = pci_dev_get(bus->self); - if (!dev) - return false; - - if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { - down_read(&pci_bus_sem); - if (pcie_pme_walk_bus(bus)) - found = true; - up_read(&pci_bus_sem); - } - - pci_dev_put(dev); - return found; -} - -/** - * pcie_pme_handle_request - Find device that generated PME and handle it. - * @port: Root port or event collector that generated the PME interrupt. - * @req_id: PCIe Requester ID of the device that generated the PME. - */ -static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) -{ - u8 busnr = req_id >> 8, devfn = req_id & 0xff; - struct pci_bus *bus; - struct pci_dev *dev; - bool found = false; - - /* First, check if the PME is from the root port itself. */ - if (port->devfn == devfn && port->bus->number == busnr) { - if (pci_check_pme_status(port)) { - pm_request_resume(&port->dev); - found = true; - } else { - /* - * Apparently, the root port generated the PME on behalf - * of a non-PCIe device downstream. If this is done by - * a root port, the Requester ID field in its status - * register may contain either the root port's, or the - * source device's information (PCI Express Base - * Specification, Rev. 2.0, Section 6.1.9). - */ - down_read(&pci_bus_sem); - found = pcie_pme_walk_bus(port->subordinate); - up_read(&pci_bus_sem); - } - goto out; - } - - /* Second, find the bus the source device is on. */ - bus = pci_find_bus(pci_domain_nr(port->bus), busnr); - if (!bus) - goto out; - - /* Next, check if the PME is from a PCIe-PCI bridge. */ - found = pcie_pme_from_pci_bridge(bus, devfn); - if (found) - goto out; - - /* Finally, try to find the PME source on the bus. */ - down_read(&pci_bus_sem); - list_for_each_entry(dev, &bus->devices, bus_list) { - pci_dev_get(dev); - if (dev->devfn == devfn) { - found = true; - break; - } - pci_dev_put(dev); - } - up_read(&pci_bus_sem); - - if (found) { - /* The device is there, but we have to check its PME status. */ - found = pci_check_pme_status(dev); - if (found) { - pm_request_resume(&dev->dev); - pci_wakeup_event(dev); - } - pci_dev_put(dev); - } else if (devfn) { - /* - * The device is not there, but we can still try to recover by - * assuming that the PME was reported by a PCIe-PCI bridge that - * used devfn different from zero. - */ - dev_dbg(&port->dev, "PME interrupt generated for " - "non-existent device %02x:%02x.%d\n", - busnr, PCI_SLOT(devfn), PCI_FUNC(devfn)); - found = pcie_pme_from_pci_bridge(bus, 0); - } - - out: - if (!found) - dev_dbg(&port->dev, "Spurious native PME interrupt!\n"); -} - -/** - * pcie_pme_work_fn - Work handler for PCIe PME interrupt. - * @work: Work structure giving access to service data. - */ -static void pcie_pme_work_fn(struct work_struct *work) -{ - struct pcie_pme_service_data *data = - container_of(work, struct pcie_pme_service_data, work); - struct pci_dev *port = data->srv->port; - int rtsta_pos; - u32 rtsta; - - rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; - - spin_lock_irq(&data->lock); - - for (;;) { - if (data->noirq) - break; - - pci_read_config_dword(port, rtsta_pos, &rtsta); - if (rtsta & PCI_EXP_RTSTA_PME) { - /* - * Clear PME status of the port. If there are other - * pending PMEs, the status will be set again. - */ - pcie_pme_clear_status(port); - - spin_unlock_irq(&data->lock); - pcie_pme_handle_request(port, rtsta & 0xffff); - spin_lock_irq(&data->lock); - - continue; - } - - /* No need to loop if there are no more PMEs pending. */ - if (!(rtsta & PCI_EXP_RTSTA_PENDING)) - break; - - spin_unlock_irq(&data->lock); - cpu_relax(); - spin_lock_irq(&data->lock); - } - - if (!data->noirq) - pcie_pme_interrupt_enable(port, true); - - spin_unlock_irq(&data->lock); -} - -/** - * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt. - * @irq: Interrupt vector. - * @context: Interrupt context pointer. - */ -static irqreturn_t pcie_pme_irq(int irq, void *context) -{ - struct pci_dev *port; - struct pcie_pme_service_data *data; - int rtsta_pos; - u32 rtsta; - unsigned long flags; - - port = ((struct pcie_device *)context)->port; - data = get_service_data((struct pcie_device *)context); - - rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; - - spin_lock_irqsave(&data->lock, flags); - pci_read_config_dword(port, rtsta_pos, &rtsta); - - if (!(rtsta & PCI_EXP_RTSTA_PME)) { - spin_unlock_irqrestore(&data->lock, flags); - return IRQ_NONE; - } - - pcie_pme_interrupt_enable(port, false); - spin_unlock_irqrestore(&data->lock, flags); - - /* We don't use pm_wq, because it's freezable. */ - schedule_work(&data->work); - - return IRQ_HANDLED; -} - -/** - * pcie_pme_set_native - Set the PME interrupt flag for given device. - * @dev: PCI device to handle. - * @ign: Ignored. - */ -static int pcie_pme_set_native(struct pci_dev *dev, void *ign) -{ - dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n"); - - device_set_run_wake(&dev->dev, true); - dev->pme_interrupt = true; - return 0; -} - -/** - * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port. - * @port: PCIe root port or event collector to handle. - * - * For each device below given root port, including the port itself (or for each - * root complex integrated endpoint if @port is a root complex event collector) - * set the flag indicating that it can signal run-time wake-up events via PCIe - * PME interrupts. - */ -static void pcie_pme_mark_devices(struct pci_dev *port) -{ - pcie_pme_set_native(port, NULL); - if (port->subordinate) { - pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL); - } else { - struct pci_bus *bus = port->bus; - struct pci_dev *dev; - - /* Check if this is a root port event collector. */ - if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus) - return; - - down_read(&pci_bus_sem); - list_for_each_entry(dev, &bus->devices, bus_list) - if (pci_is_pcie(dev) - && dev->pcie_type == PCI_EXP_TYPE_RC_END) - pcie_pme_set_native(dev, NULL); - up_read(&pci_bus_sem); - } -} - -/** - * pcie_pme_probe - Initialize PCIe PME service for given root port. - * @srv: PCIe service to initialize. - */ -static int pcie_pme_probe(struct pcie_device *srv) -{ - struct pci_dev *port; - struct pcie_pme_service_data *data; - int ret; - - if (!pcie_pme_platform_setup(srv)) - return -EACCES; - - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - spin_lock_init(&data->lock); - INIT_WORK(&data->work, pcie_pme_work_fn); - data->srv = srv; - set_service_data(srv, data); - - port = srv->port; - pcie_pme_interrupt_enable(port, false); - pcie_pme_clear_status(port); - - ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); - if (ret) { - kfree(data); - } else { - pcie_pme_mark_devices(port); - pcie_pme_interrupt_enable(port, true); - } - - return ret; -} - -/** - * pcie_pme_suspend - Suspend PCIe PME service device. - * @srv: PCIe service device to suspend. - */ -static int pcie_pme_suspend(struct pcie_device *srv) -{ - struct pcie_pme_service_data *data = get_service_data(srv); - struct pci_dev *port = srv->port; - - spin_lock_irq(&data->lock); - pcie_pme_interrupt_enable(port, false); - pcie_pme_clear_status(port); - data->noirq = true; - spin_unlock_irq(&data->lock); - - synchronize_irq(srv->irq); - - return 0; -} - -/** - * pcie_pme_resume - Resume PCIe PME service device. - * @srv - PCIe service device to resume. - */ -static int pcie_pme_resume(struct pcie_device *srv) -{ - struct pcie_pme_service_data *data = get_service_data(srv); - struct pci_dev *port = srv->port; - - spin_lock_irq(&data->lock); - data->noirq = false; - pcie_pme_clear_status(port); - pcie_pme_interrupt_enable(port, true); - spin_unlock_irq(&data->lock); - - return 0; -} - -/** - * pcie_pme_remove - Prepare PCIe PME service device for removal. - * @srv - PCIe service device to resume. - */ -static void pcie_pme_remove(struct pcie_device *srv) -{ - pcie_pme_suspend(srv); - free_irq(srv->irq, srv); - kfree(get_service_data(srv)); -} - -static struct pcie_port_service_driver pcie_pme_driver = { - .name = "pcie_pme", - .port_type = PCI_EXP_TYPE_ROOT_PORT, - .service = PCIE_PORT_SERVICE_PME, - - .probe = pcie_pme_probe, - .suspend = pcie_pme_suspend, - .resume = pcie_pme_resume, - .remove = pcie_pme_remove, -}; - -/** - * pcie_pme_service_init - Register the PCIe PME service driver. - */ -static int __init pcie_pme_service_init(void) -{ - return pcie_pme_disabled ? - -ENODEV : pcie_port_service_register(&pcie_pme_driver); -} - -module_init(pcie_pme_service_init); diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h deleted file mode 100644 index b30d2b7c977..00000000000 --- a/drivers/pci/pcie/pme/pcie_pme.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * drivers/pci/pcie/pme/pcie_pme.h - * - * PCI Express Root Port PME signaling support - * - * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. - */ - -#ifndef _PCIE_PME_H_ -#define _PCIE_PME_H_ - -struct pcie_device; - -#ifdef CONFIG_ACPI -extern int pcie_pme_acpi_setup(struct pcie_device *srv); - -static inline int pcie_pme_platform_notify(struct pcie_device *srv) -{ - return pcie_pme_acpi_setup(srv); -} -#else /* !CONFIG_ACPI */ -static inline int pcie_pme_platform_notify(struct pcie_device *srv) -{ - return 0; -} -#endif /* !CONFIG_ACPI */ - -#endif diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c deleted file mode 100644 index 83ab2287ae3..00000000000 --- a/drivers/pci/pcie/pme/pcie_pme_acpi.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * PCIe Native PME support, ACPI-related part - * - * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License V2. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/acpi.h> -#include <linux/pci-acpi.h> -#include <linux/pcieport_if.h> - -/** - * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME. - * @srv - PCIe PME service for a root port or event collector. - * - * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid - * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME - * control to the kernel. - */ -int pcie_pme_acpi_setup(struct pcie_device *srv) -{ - acpi_status status = AE_NOT_FOUND; - struct pci_dev *port = srv->port; - acpi_handle handle; - int error = 0; - - if (acpi_pci_disabled) - return -ENOSYS; - - dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n"); - - handle = acpi_find_root_bridge_handle(port); - if (!handle) - return -EINVAL; - - status = acpi_pci_osc_control_set(handle, - OSC_PCI_EXPRESS_PME_CONTROL | - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); - if (ACPI_FAILURE(status)) { - dev_info(&port->dev, - "Failed to receive control of PCIe PME service: %s\n", - (status == AE_SUPPORT || status == AE_NOT_FOUND) ? - "no _OSC support" : "ACPI _OSC failed"); - error = -ENODEV; - } - - return error; -} |